diff options
Diffstat (limited to 'drivers/mfd/ti-lmu.c')
-rw-r--r-- | drivers/mfd/ti-lmu.c | 91 |
1 files changed, 40 insertions, 51 deletions
diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c index cfb411cde51c..37d0bdb291c3 100644 --- a/drivers/mfd/ti-lmu.c +++ b/drivers/mfd/ti-lmu.c @@ -12,7 +12,7 @@ #include <linux/delay.h> #include <linux/err.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/kernel.h> #include <linux/mfd/core.h> @@ -21,28 +21,18 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/slab.h> struct ti_lmu_data { - struct mfd_cell *cells; + const struct mfd_cell *cells; int num_cells; unsigned int max_register; }; static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id) { - int ret; - - if (gpio_is_valid(lmu->en_gpio)) { - ret = devm_gpio_request_one(lmu->dev, lmu->en_gpio, - GPIOF_OUT_INIT_HIGH, "lmu_hwen"); - if (ret) { - dev_err(lmu->dev, "Can not request enable GPIO: %d\n", - ret); - return ret; - } - } + if (lmu->en_gpio) + gpiod_set_value(lmu->en_gpio, 1); /* Delay about 1ms after HW enable pin control */ usleep_range(1000, 1500); @@ -57,13 +47,14 @@ static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id) return 0; } -static void ti_lmu_disable_hw(struct ti_lmu *lmu) +static void ti_lmu_disable_hw(void *data) { - if (gpio_is_valid(lmu->en_gpio)) - gpio_set_value(lmu->en_gpio, 0); + struct ti_lmu *lmu = data; + if (lmu->en_gpio) + gpiod_set_value(lmu->en_gpio, 0); } -static struct mfd_cell lm3532_devices[] = { +static const struct mfd_cell lm3532_devices[] = { { .name = "ti-lmu-backlight", .id = LM3532, @@ -78,7 +69,7 @@ static struct mfd_cell lm3532_devices[] = { .of_compatible = "ti,lm363x-regulator", \ } \ -static struct mfd_cell lm3631_devices[] = { +static const struct mfd_cell lm3631_devices[] = { LM363X_REGULATOR(LM3631_BOOST), LM363X_REGULATOR(LM3631_LDO_CONT), LM363X_REGULATOR(LM3631_LDO_OREF), @@ -91,7 +82,7 @@ static struct mfd_cell lm3631_devices[] = { }, }; -static struct mfd_cell lm3632_devices[] = { +static const struct mfd_cell lm3632_devices[] = { LM363X_REGULATOR(LM3632_BOOST), LM363X_REGULATOR(LM3632_LDO_POS), LM363X_REGULATOR(LM3632_LDO_NEG), @@ -102,7 +93,7 @@ static struct mfd_cell lm3632_devices[] = { }, }; -static struct mfd_cell lm3633_devices[] = { +static const struct mfd_cell lm3633_devices[] = { { .name = "ti-lmu-backlight", .id = LM3633, @@ -120,7 +111,7 @@ static struct mfd_cell lm3633_devices[] = { }, }; -static struct mfd_cell lm3695_devices[] = { +static const struct mfd_cell lm3695_devices[] = { { .name = "ti-lmu-backlight", .id = LM3695, @@ -128,7 +119,7 @@ static struct mfd_cell lm3695_devices[] = { }, }; -static struct mfd_cell lm3697_devices[] = { +static const struct mfd_cell lm3697_devices[] = { { .name = "ti-lmu-backlight", .id = LM3697, @@ -157,34 +148,21 @@ TI_LMU_DATA(lm3633, LM3633_MAX_REG); TI_LMU_DATA(lm3695, LM3695_MAX_REG); TI_LMU_DATA(lm3697, LM3697_MAX_REG); -static const struct of_device_id ti_lmu_of_match[] = { - { .compatible = "ti,lm3532", .data = &lm3532_data }, - { .compatible = "ti,lm3631", .data = &lm3631_data }, - { .compatible = "ti,lm3632", .data = &lm3632_data }, - { .compatible = "ti,lm3633", .data = &lm3633_data }, - { .compatible = "ti,lm3695", .data = &lm3695_data }, - { .compatible = "ti,lm3697", .data = &lm3697_data }, - { } -}; -MODULE_DEVICE_TABLE(of, ti_lmu_of_match); - static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id) { struct device *dev = &cl->dev; - const struct of_device_id *match; const struct ti_lmu_data *data; struct regmap_config regmap_cfg; struct ti_lmu *lmu; int ret; - match = of_match_device(ti_lmu_of_match, dev); - if (!match) - return -ENODEV; /* * Get device specific data from of_match table. * This data is defined by using TI_LMU_DATA() macro. */ - data = (struct ti_lmu_data *)match->data; + data = of_device_get_match_data(dev); + if (!data) + return -ENODEV; lmu = devm_kzalloc(dev, sizeof(*lmu), GFP_KERNEL); if (!lmu) @@ -204,11 +182,21 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id) return PTR_ERR(lmu->regmap); /* HW enable pin control and additional power up sequence if required */ - lmu->en_gpio = of_get_named_gpio(dev->of_node, "enable-gpios", 0); + lmu->en_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(lmu->en_gpio)) { + ret = PTR_ERR(lmu->en_gpio); + dev_err(dev, "Can not request enable GPIO: %d\n", ret); + return ret; + } + ret = ti_lmu_enable_hw(lmu, id->driver_data); if (ret) return ret; + ret = devm_add_action_or_reset(dev, ti_lmu_disable_hw, lmu); + if (ret) + return ret; + /* * Fault circuit(open/short) can be detected by ti-lmu-fault-monitor. * After fault detection is done, some devices should re-initialize @@ -218,18 +206,20 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id) i2c_set_clientdata(cl, lmu); - return mfd_add_devices(lmu->dev, 0, data->cells, - data->num_cells, NULL, 0, NULL); + return devm_mfd_add_devices(lmu->dev, 0, data->cells, + data->num_cells, NULL, 0, NULL); } -static int ti_lmu_remove(struct i2c_client *cl) -{ - struct ti_lmu *lmu = i2c_get_clientdata(cl); - - ti_lmu_disable_hw(lmu); - mfd_remove_devices(lmu->dev); - return 0; -} +static const struct of_device_id ti_lmu_of_match[] = { + { .compatible = "ti,lm3532", .data = &lm3532_data }, + { .compatible = "ti,lm3631", .data = &lm3631_data }, + { .compatible = "ti,lm3632", .data = &lm3632_data }, + { .compatible = "ti,lm3633", .data = &lm3633_data }, + { .compatible = "ti,lm3695", .data = &lm3695_data }, + { .compatible = "ti,lm3697", .data = &lm3697_data }, + { } +}; +MODULE_DEVICE_TABLE(of, ti_lmu_of_match); static const struct i2c_device_id ti_lmu_ids[] = { { "lm3532", LM3532 }, @@ -244,7 +234,6 @@ MODULE_DEVICE_TABLE(i2c, ti_lmu_ids); static struct i2c_driver ti_lmu_driver = { .probe = ti_lmu_probe, - .remove = ti_lmu_remove, .driver = { .name = "ti-lmu", .of_match_table = ti_lmu_of_match, |