diff options
Diffstat (limited to 'drivers/media/dvb-frontends/drxk_hard.c')
| -rw-r--r-- | drivers/media/dvb-frontends/drxk_hard.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c index d416c15691da..bf29a3f0e6f0 100644 --- a/drivers/media/dvb-frontends/drxk_hard.c +++ b/drivers/media/dvb-frontends/drxk_hard.c @@ -1191,7 +1191,7 @@ static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable) goto error; if (state->m_enable_parallel == true) { - /* paralel -> enable MD1 to MD7 */ + /* parallel -> enable MD1 to MD7 */ status = write16(state, SIO_PDR_MD1_CFG__A, sio_pdr_mdx_cfg); if (status < 0) @@ -1428,7 +1428,7 @@ static int mpegts_stop(struct drxk_state *state) dprintk(1, "\n"); - /* Gracefull shutdown (byte boundaries) */ + /* Graceful shutdown (byte boundaries) */ status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode); if (status < 0) goto error; @@ -2021,7 +2021,7 @@ static int mpegts_dto_setup(struct drxk_state *state, fec_oc_dto_burst_len = 204; } - /* Check serial or parrallel output */ + /* Check serial or parallel output */ fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M)); if (state->m_enable_parallel == false) { /* MPEG data output is serial -> set ipr_mode[0] */ @@ -2908,7 +2908,7 @@ static int adc_synchronization(struct drxk_state *state) goto error; if (count == 1) { - /* Try sampling on a diffrent edge */ + /* Try sampling on a different edge */ u16 clk_neg = 0; status = read16(state, IQM_AF_CLKNEG__A, &clk_neg); @@ -3306,7 +3306,7 @@ static int dvbt_sc_command(struct drxk_state *state, if (status < 0) goto error; - /* Retreive results parameters from SC */ + /* Retrieve results parameters from SC */ switch (cmd) { /* All commands yielding 5 results */ /* All commands yielding 4 results */ @@ -3849,7 +3849,7 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz, break; } #if 0 - /* No hierachical channels support in BDA */ + /* No hierarchical channels support in BDA */ /* Priority (only for hierarchical channels) */ switch (channel->priority) { case DRX_PRIORITY_LOW: @@ -4081,7 +4081,7 @@ error: /*============================================================================*/ /** -* \brief Retreive lock status . +* \brief Retrieve lock status . * \param demod Pointer to demodulator instance. * \param lockStat Pointer to lock status structure. * \return DRXStatus_t. @@ -6174,7 +6174,7 @@ static int init_drxk(struct drxk_state *state) goto error; /* Stamp driver version number in SCU data RAM in BCD code - Done to enable field application engineers to retreive drxdriver version + Done to enable field application engineers to retrieve drxdriver version via I2C from SCU RAM. Not using SCU command interface for SCU register access since no microcode may be present. @@ -6399,7 +6399,7 @@ static int drxk_set_parameters(struct dvb_frontend *fe) fe->ops.tuner_ops.get_if_frequency(fe, &IF); start(state, 0, IF); - /* After set_frontend, stats aren't avaliable */ + /* After set_frontend, stats aren't available */ p->strength.stat[0].scale = FE_SCALE_RELATIVE; p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; |