diff options
Diffstat (limited to 'drivers/input')
-rw-r--r-- | drivers/input/misc/Kconfig | 10 | ||||
-rw-r--r-- | drivers/input/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/misc/mpu3050.c | 481 |
3 files changed, 0 insertions, 492 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 1ae4d9617ff8..5b6c52210d20 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -234,16 +234,6 @@ config INPUT_MMA8450 To compile this driver as a module, choose M here: the module will be called mma8450. -config INPUT_MPU3050 - tristate "MPU3050 Triaxial gyroscope sensor" - depends on I2C - help - Say Y here if you want to support InvenSense MPU3050 - connected via an I2C bus. - - To compile this driver as a module, choose M here: the - module will be called mpu3050. - config INPUT_APANEL tristate "Fujitsu Lifebook Application Panel buttons" depends on X86 && I2C && LEDS_CLASS diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 0b6d025f0487..b10523f2878e 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -48,7 +48,6 @@ obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o obj-$(CONFIG_INPUT_MMA8450) += mma8450.o -obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON) += palmas-pwrbutton.o obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c deleted file mode 100644 index f088db31cfc7..000000000000 --- a/drivers/input/misc/mpu3050.c +++ /dev/null @@ -1,481 +0,0 @@ -/* - * MPU3050 Tri-axis gyroscope driver - * - * Copyright (C) 2011 Wistron Co.Ltd - * Joseph Lai <joseph_lai@wistron.com> - * - * Trimmed down by Alan Cox <alan@linux.intel.com> to produce this version - * - * This is a 'lite' version of the driver, while we consider the right way - * to present the other features to user space. In particular it requires the - * device has an IRQ, and it only provides an input interface, so is not much - * use for device orientation. A fuller version is available from the Meego - * tree. - * - * This program is based on bma023.c. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - */ - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/mutex.h> -#include <linux/err.h> -#include <linux/i2c.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/pm_runtime.h> - -#define MPU3050_CHIP_ID 0x69 - -#define MPU3050_AUTO_DELAY 1000 - -#define MPU3050_MIN_VALUE -32768 -#define MPU3050_MAX_VALUE 32767 - -#define MPU3050_DEFAULT_POLL_INTERVAL 200 -#define MPU3050_DEFAULT_FS_RANGE 3 - -/* Register map */ -#define MPU3050_CHIP_ID_REG 0x00 -#define MPU3050_SMPLRT_DIV 0x15 -#define MPU3050_DLPF_FS_SYNC 0x16 -#define MPU3050_INT_CFG 0x17 -#define MPU3050_XOUT_H 0x1D -#define MPU3050_PWR_MGM 0x3E -#define MPU3050_PWR_MGM_POS 6 - -/* Register bits */ - -/* DLPF_FS_SYNC */ -#define MPU3050_EXT_SYNC_NONE 0x00 -#define MPU3050_EXT_SYNC_TEMP 0x20 -#define MPU3050_EXT_SYNC_GYROX 0x40 -#define MPU3050_EXT_SYNC_GYROY 0x60 -#define MPU3050_EXT_SYNC_GYROZ 0x80 -#define MPU3050_EXT_SYNC_ACCELX 0xA0 -#define MPU3050_EXT_SYNC_ACCELY 0xC0 -#define MPU3050_EXT_SYNC_ACCELZ 0xE0 -#define MPU3050_EXT_SYNC_MASK 0xE0 -#define MPU3050_FS_250DPS 0x00 -#define MPU3050_FS_500DPS 0x08 -#define MPU3050_FS_1000DPS 0x10 -#define MPU3050_FS_2000DPS 0x18 -#define MPU3050_FS_MASK 0x18 -#define MPU3050_DLPF_CFG_256HZ_NOLPF2 0x00 -#define MPU3050_DLPF_CFG_188HZ 0x01 -#define MPU3050_DLPF_CFG_98HZ 0x02 -#define MPU3050_DLPF_CFG_42HZ 0x03 -#define MPU3050_DLPF_CFG_20HZ 0x04 -#define MPU3050_DLPF_CFG_10HZ 0x05 -#define MPU3050_DLPF_CFG_5HZ 0x06 -#define MPU3050_DLPF_CFG_2100HZ_NOLPF 0x07 -#define MPU3050_DLPF_CFG_MASK 0x07 -/* INT_CFG */ -#define MPU3050_RAW_RDY_EN 0x01 -#define MPU3050_MPU_RDY_EN 0x02 -#define MPU3050_LATCH_INT_EN 0x04 -/* PWR_MGM */ -#define MPU3050_PWR_MGM_PLL_X 0x01 -#define MPU3050_PWR_MGM_PLL_Y 0x02 -#define MPU3050_PWR_MGM_PLL_Z 0x03 -#define MPU3050_PWR_MGM_CLKSEL 0x07 -#define MPU3050_PWR_MGM_STBY_ZG 0x08 -#define MPU3050_PWR_MGM_STBY_YG 0x10 -#define MPU3050_PWR_MGM_STBY_XG 0x20 -#define MPU3050_PWR_MGM_SLEEP 0x40 -#define MPU3050_PWR_MGM_RESET 0x80 -#define MPU3050_PWR_MGM_MASK 0x40 - -struct axis_data { - s16 x; - s16 y; - s16 z; -}; - -struct mpu3050_sensor { - struct i2c_client *client; - struct device *dev; - struct input_dev *idev; -}; - -/** - * mpu3050_xyz_read_reg - read the axes values - * @buffer: provide register addr and get register - * @length: length of register - * - * Reads the register values in one transaction or returns a negative - * error code on failure. - */ -static int mpu3050_xyz_read_reg(struct i2c_client *client, - u8 *buffer, int length) -{ - /* - * Annoying we can't make this const because the i2c layer doesn't - * declare input buffers const. - */ - char cmd = MPU3050_XOUT_H; - struct i2c_msg msg[] = { - { - .addr = client->addr, - .flags = 0, - .len = 1, - .buf = &cmd, - }, - { - .addr = client->addr, - .flags = I2C_M_RD, - .len = length, - .buf = buffer, - }, - }; - - return i2c_transfer(client->adapter, msg, 2); -} - -/** - * mpu3050_read_xyz - get co-ordinates from device - * @client: i2c address of sensor - * @coords: co-ordinates to update - * - * Return the converted X Y and Z co-ordinates from the sensor device - */ -static void mpu3050_read_xyz(struct i2c_client *client, - struct axis_data *coords) -{ - u16 buffer[3]; - - mpu3050_xyz_read_reg(client, (u8 *)buffer, 6); - coords->x = be16_to_cpu(buffer[0]); - coords->y = be16_to_cpu(buffer[1]); - coords->z = be16_to_cpu(buffer[2]); - dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__, - coords->x, coords->y, coords->z); -} - -/** - * mpu3050_set_power_mode - set the power mode - * @client: i2c client for the sensor - * @val: value to switch on/off of power, 1: normal power, 0: low power - * - * Put device to normal-power mode or low-power mode. - */ -static void mpu3050_set_power_mode(struct i2c_client *client, u8 val) -{ - u8 value; - - value = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM); - value = (value & ~MPU3050_PWR_MGM_MASK) | - (((val << MPU3050_PWR_MGM_POS) & MPU3050_PWR_MGM_MASK) ^ - MPU3050_PWR_MGM_MASK); - i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, value); -} - -/** - * mpu3050_input_open - called on input event open - * @input: input dev of opened device - * - * The input layer calls this function when input event is opened. The - * function will push the device to resume. Then, the device is ready - * to provide data. - */ -static int mpu3050_input_open(struct input_dev *input) -{ - struct mpu3050_sensor *sensor = input_get_drvdata(input); - int error; - - pm_runtime_get(sensor->dev); - - /* Enable interrupts */ - error = i2c_smbus_write_byte_data(sensor->client, MPU3050_INT_CFG, - MPU3050_LATCH_INT_EN | - MPU3050_RAW_RDY_EN | - MPU3050_MPU_RDY_EN); - if (error < 0) { - pm_runtime_put(sensor->dev); - return error; - } - - return 0; -} - -/** - * mpu3050_input_close - called on input event close - * @input: input dev of closed device - * - * The input layer calls this function when input event is closed. The - * function will push the device to suspend. - */ -static void mpu3050_input_close(struct input_dev *input) -{ - struct mpu3050_sensor *sensor = input_get_drvdata(input); - - pm_runtime_put(sensor->dev); -} - -/** - * mpu3050_interrupt_thread - handle an IRQ - * @irq: interrupt numner - * @data: the sensor - * - * Called by the kernel single threaded after an interrupt occurs. Read - * the sensor data and generate an input event for it. - */ -static irqreturn_t mpu3050_interrupt_thread(int irq, void *data) -{ - struct mpu3050_sensor *sensor = data; - struct axis_data axis; - - mpu3050_read_xyz(sensor->client, &axis); - - input_report_abs(sensor->idev, ABS_X, axis.x); - input_report_abs(sensor->idev, ABS_Y, axis.y); - input_report_abs(sensor->idev, ABS_Z, axis.z); - input_sync(sensor->idev); - - return IRQ_HANDLED; -} - -/** - * mpu3050_hw_init - initialize hardware - * @sensor: the sensor - * - * Called during device probe; configures the sampling method. - */ -static int mpu3050_hw_init(struct mpu3050_sensor *sensor) -{ - struct i2c_client *client = sensor->client; - int ret; - u8 reg; - - /* Reset */ - ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, - MPU3050_PWR_MGM_RESET); - if (ret < 0) - return ret; - - ret = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM); - if (ret < 0) - return ret; - - ret &= ~MPU3050_PWR_MGM_CLKSEL; - ret |= MPU3050_PWR_MGM_PLL_Z; - ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, ret); - if (ret < 0) - return ret; - - /* Output frequency divider. The poll interval */ - ret = i2c_smbus_write_byte_data(client, MPU3050_SMPLRT_DIV, - MPU3050_DEFAULT_POLL_INTERVAL - 1); - if (ret < 0) - return ret; - - /* Set low pass filter and full scale */ - reg = MPU3050_DEFAULT_FS_RANGE; - reg |= MPU3050_DLPF_CFG_42HZ << 3; - reg |= MPU3050_EXT_SYNC_NONE << 5; - ret = i2c_smbus_write_byte_data(client, MPU3050_DLPF_FS_SYNC, reg); - if (ret < 0) - return ret; - - return 0; -} - -/** - * mpu3050_probe - device detection callback - * @client: i2c client of found device - * @id: id match information - * - * The I2C layer calls us when it believes a sensor is present at this - * address. Probe to see if this is correct and to validate the device. - * - * If present install the relevant sysfs interfaces and input device. - */ -static int mpu3050_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct mpu3050_sensor *sensor; - struct input_dev *idev; - int ret; - int error; - - sensor = kzalloc(sizeof(struct mpu3050_sensor), GFP_KERNEL); - idev = input_allocate_device(); - if (!sensor || !idev) { - dev_err(&client->dev, "failed to allocate driver data\n"); - error = -ENOMEM; - goto err_free_mem; - } - - sensor->client = client; - sensor->dev = &client->dev; - sensor->idev = idev; - - mpu3050_set_power_mode(client, 1); - msleep(10); - - ret = i2c_smbus_read_byte_data(client, MPU3050_CHIP_ID_REG); - if (ret < 0) { - dev_err(&client->dev, "failed to detect device\n"); - error = -ENXIO; - goto err_free_mem; - } - - if (ret != MPU3050_CHIP_ID) { - dev_err(&client->dev, "unsupported chip id\n"); - error = -ENXIO; - goto err_free_mem; - } - - idev->name = "MPU3050"; - idev->id.bustype = BUS_I2C; - idev->dev.parent = &client->dev; - - idev->open = mpu3050_input_open; - idev->close = mpu3050_input_close; - - __set_bit(EV_ABS, idev->evbit); - input_set_abs_params(idev, ABS_X, - MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0); - input_set_abs_params(idev, ABS_Y, - MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0); - input_set_abs_params(idev, ABS_Z, - MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0); - - input_set_drvdata(idev, sensor); - - pm_runtime_set_active(&client->dev); - - error = mpu3050_hw_init(sensor); - if (error) - goto err_pm_set_suspended; - - error = request_threaded_irq(client->irq, - NULL, mpu3050_interrupt_thread, - IRQF_TRIGGER_RISING | IRQF_ONESHOT, - "mpu3050", sensor); - if (error) { - dev_err(&client->dev, - "can't get IRQ %d, error %d\n", client->irq, error); - goto err_pm_set_suspended; - } - - error = input_register_device(idev); - if (error) { - dev_err(&client->dev, "failed to register input device\n"); - goto err_free_irq; - } - - pm_runtime_enable(&client->dev); - pm_runtime_set_autosuspend_delay(&client->dev, MPU3050_AUTO_DELAY); - i2c_set_clientdata(client, sensor); - - return 0; - -err_free_irq: - free_irq(client->irq, sensor); -err_pm_set_suspended: - pm_runtime_set_suspended(&client->dev); -err_free_mem: - input_free_device(idev); - kfree(sensor); - return error; -} - -/** - * mpu3050_remove - remove a sensor - * @client: i2c client of sensor being removed - * - * Our sensor is going away, clean up the resources. - */ -static int mpu3050_remove(struct i2c_client *client) -{ - struct mpu3050_sensor *sensor = i2c_get_clientdata(client); - - pm_runtime_disable(&client->dev); - pm_runtime_set_suspended(&client->dev); - - free_irq(client->irq, sensor); - input_unregister_device(sensor->idev); - kfree(sensor); - - return 0; -} - -#ifdef CONFIG_PM -/** - * mpu3050_suspend - called on device suspend - * @dev: device being suspended - * - * Put the device into sleep mode before we suspend the machine. - */ -static int mpu3050_suspend(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - - mpu3050_set_power_mode(client, 0); - - return 0; -} - -/** - * mpu3050_resume - called on device resume - * @dev: device being resumed - * - * Put the device into powered mode on resume. - */ -static int mpu3050_resume(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - - mpu3050_set_power_mode(client, 1); - msleep(100); /* wait for gyro chip resume */ - - return 0; -} -#endif - -static UNIVERSAL_DEV_PM_OPS(mpu3050_pm, mpu3050_suspend, mpu3050_resume, NULL); - -static const struct i2c_device_id mpu3050_ids[] = { - { "mpu3050", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mpu3050_ids); - -static const struct of_device_id mpu3050_of_match[] = { - { .compatible = "invn,mpu3050", }, - { }, -}; -MODULE_DEVICE_TABLE(of, mpu3050_of_match); - -static struct i2c_driver mpu3050_i2c_driver = { - .driver = { - .name = "mpu3050", - .pm = &mpu3050_pm, - .of_match_table = mpu3050_of_match, - }, - .probe = mpu3050_probe, - .remove = mpu3050_remove, - .id_table = mpu3050_ids, -}; - -module_i2c_driver(mpu3050_i2c_driver); - -MODULE_AUTHOR("Wistron Corp."); -MODULE_DESCRIPTION("MPU3050 Tri-axis gyroscope driver"); -MODULE_LICENSE("GPL"); |