diff options
Diffstat (limited to 'drivers/hwmon/pmbus/pmbus.h')
| -rw-r--r-- | drivers/hwmon/pmbus/pmbus.h | 23 |
1 files changed, 20 insertions, 3 deletions
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h index a6ae20ffef6b..5d31d1c2c0f5 100644 --- a/drivers/hwmon/pmbus/pmbus.h +++ b/drivers/hwmon/pmbus/pmbus.h @@ -134,8 +134,16 @@ * Semantics: * Virtual registers are all word size. * READ registers are read-only; writes are either ignored or return an error. - * RESET registers are read/write. Reading returns zero (used for detection), - * writing any value causes the associated history to be reset. + * RESET registers are read/write. Reading reset registers returns zero + * (used for detection), writing any value causes the associated history to be + * reset. + * Virtual registers have to be handled in device specific driver code. Chip + * driver code returns non-negative register values if a virtual register is + * supported, or a negative error code if not. The chip driver may return + * -ENODATA or any other error code in this case, though an error code other + * than -ENODATA is handled more efficiently and thus preferred. Either case, + * the calling PMBus core code will abort if the chip driver returns an error + * code when reading or writing virtual registers. */ #define PMBUS_VIRT_BASE 0x100 #define PMBUS_VIRT_READ_TEMP_MIN (PMBUS_VIRT_BASE + 0) @@ -160,6 +168,9 @@ #define PMBUS_VIRT_READ_IOUT_MIN (PMBUS_VIRT_BASE + 19) #define PMBUS_VIRT_READ_IOUT_MAX (PMBUS_VIRT_BASE + 20) #define PMBUS_VIRT_RESET_IOUT_HISTORY (PMBUS_VIRT_BASE + 21) +#define PMBUS_VIRT_READ_TEMP2_MIN (PMBUS_VIRT_BASE + 22) +#define PMBUS_VIRT_READ_TEMP2_MAX (PMBUS_VIRT_BASE + 23) +#define PMBUS_VIRT_RESET_TEMP2_HISTORY (PMBUS_VIRT_BASE + 24) /* * CAPABILITY @@ -320,6 +331,12 @@ struct pmbus_driver_info { * The following functions map manufacturing specific register values * to PMBus standard register values. Specify only if mapping is * necessary. + * Functions return the register value (read) or zero (write) if + * successful. A return value of -ENODATA indicates that there is no + * manufacturer specific register, but that a standard PMBus register + * may exist. Any other negative return value indicates that the + * register does not exist, and that no attempt should be made to read + * the standard register. */ int (*read_byte_data)(struct i2c_client *client, int page, int reg); int (*read_word_data)(struct i2c_client *client, int page, int reg); @@ -347,7 +364,7 @@ bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, struct pmbus_driver_info *info); -int pmbus_do_remove(struct i2c_client *client); +void pmbus_do_remove(struct i2c_client *client); const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client); |