diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 986 |
1 files changed, 456 insertions, 530 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 5ad45bfff3fe..5cecc20efa71 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -113,6 +113,9 @@ static struct intel_dp *intel_attached_dp(struct drm_connector *connector) static void intel_dp_link_down(struct intel_dp *intel_dp); static bool edp_panel_vdd_on(struct intel_dp *intel_dp); static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync); +static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp); +static void vlv_steal_power_sequencer(struct drm_device *dev, + enum pipe pipe); int intel_dp_max_link_bw(struct intel_dp *intel_dp) @@ -224,8 +227,7 @@ intel_dp_mode_valid(struct drm_connector *connector, return MODE_OK; } -static uint32_t -pack_aux(uint8_t *src, int src_bytes) +uint32_t intel_dp_pack_aux(const uint8_t *src, int src_bytes) { int i; uint32_t v = 0; @@ -237,8 +239,7 @@ pack_aux(uint8_t *src, int src_bytes) return v; } -static void -unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) +void intel_dp_unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) { int i; if (dst_bytes > 4) @@ -283,12 +284,10 @@ intel_hrawclk(struct drm_device *dev) static void intel_dp_init_panel_power_sequencer(struct drm_device *dev, - struct intel_dp *intel_dp, - struct edp_power_seq *out); + struct intel_dp *intel_dp); static void intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, - struct intel_dp *intel_dp, - struct edp_power_seq *out); + struct intel_dp *intel_dp); static void pps_lock(struct intel_dp *intel_dp) { @@ -322,6 +321,66 @@ static void pps_unlock(struct intel_dp *intel_dp) intel_display_power_put(dev_priv, power_domain); } +static void +vlv_power_sequencer_kick(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum pipe pipe = intel_dp->pps_pipe; + bool pll_enabled; + uint32_t DP; + + if (WARN(I915_READ(intel_dp->output_reg) & DP_PORT_EN, + "skipping pipe %c power seqeuncer kick due to port %c being active\n", + pipe_name(pipe), port_name(intel_dig_port->port))) + return; + + DRM_DEBUG_KMS("kicking pipe %c power sequencer for port %c\n", + pipe_name(pipe), port_name(intel_dig_port->port)); + + /* Preserve the BIOS-computed detected bit. This is + * supposed to be read-only. + */ + DP = I915_READ(intel_dp->output_reg) & DP_DETECTED; + DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; + DP |= DP_PORT_WIDTH(1); + DP |= DP_LINK_TRAIN_PAT_1; + + if (IS_CHERRYVIEW(dev)) + DP |= DP_PIPE_SELECT_CHV(pipe); + else if (pipe == PIPE_B) + DP |= DP_PIPEB_SELECT; + + pll_enabled = I915_READ(DPLL(pipe)) & DPLL_VCO_ENABLE; + + /* + * The DPLL for the pipe must be enabled for this to work. + * So enable temporarily it if it's not already enabled. + */ + if (!pll_enabled) + vlv_force_pll_on(dev, pipe, IS_CHERRYVIEW(dev) ? + &chv_dpll[0].dpll : &vlv_dpll[0].dpll); + + /* + * Similar magic as in intel_dp_enable_port(). + * We _must_ do this port enable + disable trick + * to make this power seqeuencer lock onto the port. + * Otherwise even VDD force bit won't work. + */ + I915_WRITE(intel_dp->output_reg, DP); + POSTING_READ(intel_dp->output_reg); + + I915_WRITE(intel_dp->output_reg, DP | DP_PORT_EN); + POSTING_READ(intel_dp->output_reg); + + I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); + POSTING_READ(intel_dp->output_reg); + + if (!pll_enabled) + vlv_force_pll_off(dev, pipe); +} + static enum pipe vlv_power_sequencer_pipe(struct intel_dp *intel_dp) { @@ -330,10 +389,13 @@ vlv_power_sequencer_pipe(struct intel_dp *intel_dp) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; unsigned int pipes = (1 << PIPE_A) | (1 << PIPE_B); - struct edp_power_seq power_seq; + enum pipe pipe; lockdep_assert_held(&dev_priv->pps_mutex); + /* We should never land here with regular DP ports */ + WARN_ON(!is_edp(intel_dp)); + if (intel_dp->pps_pipe != INVALID_PIPE) return intel_dp->pps_pipe; @@ -359,18 +421,26 @@ vlv_power_sequencer_pipe(struct intel_dp *intel_dp) * are two power sequencers and up to two eDP ports. */ if (WARN_ON(pipes == 0)) - return PIPE_A; + pipe = PIPE_A; + else + pipe = ffs(pipes) - 1; - intel_dp->pps_pipe = ffs(pipes) - 1; + vlv_steal_power_sequencer(dev, pipe); + intel_dp->pps_pipe = pipe; DRM_DEBUG_KMS("picked pipe %c power sequencer for port %c\n", pipe_name(intel_dp->pps_pipe), port_name(intel_dig_port->port)); /* init power sequencer on this pipe and port */ - intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, - &power_seq); + intel_dp_init_panel_power_sequencer(dev, intel_dp); + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp); + + /* + * Even vdd force doesn't work until we've made + * the power sequencer lock in on the port. + */ + vlv_power_sequencer_kick(intel_dp); return intel_dp->pps_pipe; } @@ -425,7 +495,6 @@ vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp) struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = intel_dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct edp_power_seq power_seq; enum port port = intel_dig_port->port; lockdep_assert_held(&dev_priv->pps_mutex); @@ -453,9 +522,8 @@ vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp) DRM_DEBUG_KMS("initial power sequencer for port %c: pipe %c\n", port_name(port), pipe_name(intel_dp->pps_pipe)); - intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, - &power_seq); + intel_dp_init_panel_power_sequencer(dev, intel_dp); + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp); } void vlv_power_sequencer_reset(struct drm_i915_private *dev_priv) @@ -550,6 +618,10 @@ static bool edp_have_panel_power(struct intel_dp *intel_dp) lockdep_assert_held(&dev_priv->pps_mutex); + if (IS_VALLEYVIEW(dev) && + intel_dp->pps_pipe == INVALID_PIPE) + return false; + return (I915_READ(_pp_stat_reg(intel_dp)) & PP_ON) != 0; } @@ -560,6 +632,10 @@ static bool edp_have_panel_vdd(struct intel_dp *intel_dp) lockdep_assert_held(&dev_priv->pps_mutex); + if (IS_VALLEYVIEW(dev) && + intel_dp->pps_pipe == INVALID_PIPE) + return false; + return I915_READ(_pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD; } @@ -661,6 +737,16 @@ static uint32_t vlv_get_aux_clock_divider(struct intel_dp *intel_dp, int index) return index ? 0 : 100; } +static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + /* + * SKL doesn't need us to program the AUX clock divider (Hardware will + * derive the clock from CDCLK automatically). We still implement the + * get_aux_clock_divider vfunc to plug-in into the existing code. + */ + return index ? 0 : 1; +} + static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp, bool has_aux_irq, int send_bytes, @@ -691,9 +777,24 @@ static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp, (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT); } +static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp, + bool has_aux_irq, + int send_bytes, + uint32_t unused) +{ + return DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_DONE | + (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_TIME_OUT_1600us | + DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + DP_AUX_CH_CTL_SYNC_PULSE_SKL(32); +} + static int intel_dp_aux_ch(struct intel_dp *intel_dp, - uint8_t *send, int send_bytes, + const uint8_t *send, int send_bytes, uint8_t *recv, int recv_size) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); @@ -760,7 +861,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, /* Load the send data into the aux channel data registers */ for (i = 0; i < send_bytes; i += 4) I915_WRITE(ch_data + i, - pack_aux(send + i, send_bytes - i)); + intel_dp_pack_aux(send + i, + send_bytes - i)); /* Send the command and wait for it to complete */ I915_WRITE(ch_ctl, send_ctl); @@ -814,8 +916,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, recv_bytes = recv_size; for (i = 0; i < recv_bytes; i += 4) - unpack_aux(I915_READ(ch_data + i), - recv + i, recv_bytes - i); + intel_dp_unpack_aux(I915_READ(ch_data + i), + recv + i, recv_bytes - i); ret = recv_bytes; out: @@ -925,7 +1027,16 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector) BUG(); } - if (!HAS_DDI(dev)) + /* + * The AUX_CTL register is usually DP_CTL + 0x10. + * + * On Haswell and Broadwell though: + * - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU + * - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU + * + * Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU. + */ + if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10; intel_dp->aux.name = name; @@ -963,6 +1074,33 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector) } static void +skl_edp_set_pll_config(struct intel_crtc_config *pipe_config, int link_bw) +{ + u32 ctrl1; + + pipe_config->ddi_pll_sel = SKL_DPLL0; + pipe_config->dpll_hw_state.cfgcr1 = 0; + pipe_config->dpll_hw_state.cfgcr2 = 0; + + ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0); + switch (link_bw) { + case DP_LINK_BW_1_62: + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810, + SKL_DPLL0); + break; + case DP_LINK_BW_2_7: + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350, + SKL_DPLL0); + break; + case DP_LINK_BW_5_4: + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700, + SKL_DPLL0); + break; + } + pipe_config->dpll_hw_state.ctrl1 = ctrl1; +} + +static void hsw_dp_set_ddi_pll_sel(struct intel_crtc_config *pipe_config, int link_bw) { switch (link_bw) { @@ -1139,7 +1277,9 @@ found: &pipe_config->dp_m2_n2); } - if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + if (IS_SKYLAKE(dev) && is_edp(intel_dp)) + skl_edp_set_pll_config(pipe_config, intel_dp->link_bw); + else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw); else intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); @@ -1212,12 +1352,8 @@ static void intel_dp_prepare(struct intel_encoder *encoder) intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count); - if (crtc->config.has_audio) { - DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n", - pipe_name(crtc->pipe)); + if (crtc->config.has_audio) intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; - intel_write_eld(&encoder->base, adjusted_mode); - } /* Split out the IBX/CPU vs CPT settings */ @@ -1367,6 +1503,7 @@ static bool edp_panel_vdd_on(struct intel_dp *intel_dp) if (!is_edp(intel_dp)) return false; + cancel_delayed_work(&intel_dp->panel_vdd_work); intel_dp->want_panel_vdd = true; if (edp_have_panel_vdd(intel_dp)) @@ -1375,7 +1512,8 @@ static bool edp_panel_vdd_on(struct intel_dp *intel_dp) power_domain = intel_display_port_power_domain(intel_encoder); intel_display_power_get(dev_priv, power_domain); - DRM_DEBUG_KMS("Turning eDP VDD on\n"); + DRM_DEBUG_KMS("Turning eDP port %c VDD on\n", + port_name(intel_dig_port->port)); if (!edp_have_panel_power(intel_dp)) wait_panel_power_cycle(intel_dp); @@ -1394,7 +1532,8 @@ static bool edp_panel_vdd_on(struct intel_dp *intel_dp) * If the panel wasn't on, delay before accessing aux channel */ if (!edp_have_panel_power(intel_dp)) { - DRM_DEBUG_KMS("eDP was not running\n"); + DRM_DEBUG_KMS("eDP port %c panel power wasn't enabled\n", + port_name(intel_dig_port->port)); msleep(intel_dp->panel_power_up_delay); } @@ -1419,7 +1558,8 @@ void intel_edp_panel_vdd_on(struct intel_dp *intel_dp) vdd = edp_panel_vdd_on(intel_dp); pps_unlock(intel_dp); - WARN(!vdd, "eDP VDD already requested on\n"); + WARN(!vdd, "eDP port %c VDD already requested on\n", + port_name(dp_to_dig_port(intel_dp)->port)); } static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) @@ -1440,7 +1580,8 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) if (!edp_have_panel_vdd(intel_dp)) return; - DRM_DEBUG_KMS("Turning eDP VDD off\n"); + DRM_DEBUG_KMS("Turning eDP port %c VDD off\n", + port_name(intel_dig_port->port)); pp = ironlake_get_pp_control(intel_dp); pp &= ~EDP_FORCE_VDD; @@ -1501,7 +1642,8 @@ static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) if (!is_edp(intel_dp)) return; - WARN(!intel_dp->want_panel_vdd, "eDP VDD not forced on"); + WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on", + port_name(dp_to_dig_port(intel_dp)->port)); intel_dp->want_panel_vdd = false; @@ -1511,40 +1653,25 @@ static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) edp_panel_vdd_schedule_off(intel_dp); } -/* - * Must be paired with intel_edp_panel_vdd_on(). - * Nested calls to these functions are not allowed since - * we drop the lock. Caller must use some higher level - * locking to prevent nested calls from other threads. - */ -static void intel_edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) -{ - if (!is_edp(intel_dp)) - return; - - pps_lock(intel_dp); - edp_panel_vdd_off(intel_dp, sync); - pps_unlock(intel_dp); -} - -void intel_edp_panel_on(struct intel_dp *intel_dp) +static void edp_panel_on(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; u32 pp; u32 pp_ctrl_reg; + lockdep_assert_held(&dev_priv->pps_mutex); + if (!is_edp(intel_dp)) return; - DRM_DEBUG_KMS("Turn eDP power on\n"); + DRM_DEBUG_KMS("Turn eDP port %c panel power on\n", + port_name(dp_to_dig_port(intel_dp)->port)); - pps_lock(intel_dp); - - if (edp_have_panel_power(intel_dp)) { - DRM_DEBUG_KMS("eDP power already on\n"); - goto out; - } + if (WARN(edp_have_panel_power(intel_dp), + "eDP port %c panel power already on\n", + port_name(dp_to_dig_port(intel_dp)->port))) + return; wait_panel_power_cycle(intel_dp); @@ -1572,12 +1699,20 @@ void intel_edp_panel_on(struct intel_dp *intel_dp) I915_WRITE(pp_ctrl_reg, pp); POSTING_READ(pp_ctrl_reg); } +} + +void intel_edp_panel_on(struct intel_dp *intel_dp) +{ + if (!is_edp(intel_dp)) + return; - out: + pps_lock(intel_dp); + edp_panel_on(intel_dp); pps_unlock(intel_dp); } -void intel_edp_panel_off(struct intel_dp *intel_dp) + +static void edp_panel_off(struct intel_dp *intel_dp) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct intel_encoder *intel_encoder = &intel_dig_port->base; @@ -1587,14 +1722,16 @@ void intel_edp_panel_off(struct intel_dp *intel_dp) u32 pp; u32 pp_ctrl_reg; + lockdep_assert_held(&dev_priv->pps_mutex); + if (!is_edp(intel_dp)) return; - DRM_DEBUG_KMS("Turn eDP power off\n"); - - pps_lock(intel_dp); + DRM_DEBUG_KMS("Turn eDP port %c panel power off\n", + port_name(dp_to_dig_port(intel_dp)->port)); - WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n"); + WARN(!intel_dp->want_panel_vdd, "Need eDP port %c VDD to turn off panel\n", + port_name(dp_to_dig_port(intel_dp)->port)); pp = ironlake_get_pp_control(intel_dp); /* We need to switch off panel power _and_ force vdd, for otherwise some @@ -1615,7 +1752,15 @@ void intel_edp_panel_off(struct intel_dp *intel_dp) /* We got a reference when we enabled the VDD. */ power_domain = intel_display_port_power_domain(intel_encoder); intel_display_power_put(dev_priv, power_domain); +} + +void intel_edp_panel_off(struct intel_dp *intel_dp) +{ + if (!is_edp(intel_dp)) + return; + pps_lock(intel_dp); + edp_panel_off(intel_dp); pps_unlock(intel_dp); } @@ -1819,7 +1964,7 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder, u32 tmp; power_domain = intel_display_port_power_domain(encoder); - if (!intel_display_power_enabled(dev_priv, power_domain)) + if (!intel_display_power_is_enabled(dev_priv, power_domain)) return false; tmp = I915_READ(intel_dp->output_reg); @@ -1951,368 +2096,14 @@ static void intel_dp_get_config(struct intel_encoder *encoder, } } -static bool is_edp_psr(struct intel_dp *intel_dp) -{ - return intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED; -} - -static bool intel_edp_is_psr_enabled(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - - if (!HAS_PSR(dev)) - return false; - - return I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE; -} - -static void intel_edp_psr_write_vsc(struct intel_dp *intel_dp, - struct edp_vsc_psr *vsc_psr) -{ - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); - struct drm_device *dev = dig_port->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); - u32 ctl_reg = HSW_TVIDEO_DIP_CTL(crtc->config.cpu_transcoder); - u32 data_reg = HSW_TVIDEO_DIP_VSC_DATA(crtc->config.cpu_transcoder); - uint32_t *data = (uint32_t *) vsc_psr; - unsigned int i; - - /* As per BSPec (Pipe Video Data Island Packet), we need to disable - the video DIP being updated before program video DIP data buffer - registers for DIP being updated. */ - I915_WRITE(ctl_reg, 0); - POSTING_READ(ctl_reg); - - for (i = 0; i < VIDEO_DIP_VSC_DATA_SIZE; i += 4) { - if (i < sizeof(struct edp_vsc_psr)) - I915_WRITE(data_reg + i, *data++); - else - I915_WRITE(data_reg + i, 0); - } - - I915_WRITE(ctl_reg, VIDEO_DIP_ENABLE_VSC_HSW); - POSTING_READ(ctl_reg); -} - -static void intel_edp_psr_setup(struct intel_dp *intel_dp) -{ - struct drm_device *dev = intel_dp_to_dev(intel_dp); - struct drm_i915_private *dev_priv = dev->dev_private; - struct edp_vsc_psr psr_vsc; - - /* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */ - memset(&psr_vsc, 0, sizeof(psr_vsc)); - psr_vsc.sdp_header.HB0 = 0; - psr_vsc.sdp_header.HB1 = 0x7; - psr_vsc.sdp_header.HB2 = 0x2; - psr_vsc.sdp_header.HB3 = 0x8; - intel_edp_psr_write_vsc(intel_dp, &psr_vsc); - - /* Avoid continuous PSR exit by masking memup and hpd */ - I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP | - EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP); -} - -static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp) -{ - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); - struct drm_device *dev = dig_port->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t aux_clock_divider; - int precharge = 0x3; - int msg_size = 5; /* Header(4) + Message(1) */ - bool only_standby = false; - - aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0); - - if (IS_BROADWELL(dev) && dig_port->port != PORT_A) - only_standby = true; - - /* Enable PSR in sink */ - if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT || only_standby) - drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, - DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE); - else - drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, - DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE); - - /* Setup AUX registers */ - I915_WRITE(EDP_PSR_AUX_DATA1(dev), EDP_PSR_DPCD_COMMAND); - I915_WRITE(EDP_PSR_AUX_DATA2(dev), EDP_PSR_DPCD_NORMAL_OPERATION); - I915_WRITE(EDP_PSR_AUX_CTL(dev), - DP_AUX_CH_CTL_TIME_OUT_400us | - (msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | - (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | - (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT)); -} - -static void intel_edp_psr_enable_source(struct intel_dp *intel_dp) -{ - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); - struct drm_device *dev = dig_port->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t max_sleep_time = 0x1f; - uint32_t idle_frames = 1; - uint32_t val = 0x0; - const uint32_t link_entry_time = EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES; - bool only_standby = false; - - if (IS_BROADWELL(dev) && dig_port->port != PORT_A) - only_standby = true; - - if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT || only_standby) { - val |= EDP_PSR_LINK_STANDBY; - val |= EDP_PSR_TP2_TP3_TIME_0us; - val |= EDP_PSR_TP1_TIME_0us; - val |= EDP_PSR_SKIP_AUX_EXIT; - val |= IS_BROADWELL(dev) ? BDW_PSR_SINGLE_FRAME : 0; - } else - val |= EDP_PSR_LINK_DISABLE; - - I915_WRITE(EDP_PSR_CTL(dev), val | - (IS_BROADWELL(dev) ? 0 : link_entry_time) | - max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT | - idle_frames << EDP_PSR_IDLE_FRAME_SHIFT | - EDP_PSR_ENABLE); -} - -static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp) -{ - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); - struct drm_device *dev = dig_port->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_crtc *crtc = dig_port->base.base.crtc; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - - lockdep_assert_held(&dev_priv->psr.lock); - WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); - WARN_ON(!drm_modeset_is_locked(&crtc->mutex)); - - dev_priv->psr.source_ok = false; - - if (IS_HASWELL(dev) && dig_port->port != PORT_A) { - DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n"); - return false; - } - - if (!i915.enable_psr) { - DRM_DEBUG_KMS("PSR disable by flag\n"); - return false; - } - - /* Below limitations aren't valid for Broadwell */ - if (IS_BROADWELL(dev)) - goto out; - - if (I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config.cpu_transcoder)) & - S3D_ENABLE) { - DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n"); - return false; - } - - if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) { - DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n"); - return false; - } - - out: - dev_priv->psr.source_ok = true; - return true; -} - -static void intel_edp_psr_do_enable(struct intel_dp *intel_dp) -{ - struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); - struct drm_device *dev = intel_dig_port->base.base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - - WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE); - WARN_ON(dev_priv->psr.active); - lockdep_assert_held(&dev_priv->psr.lock); - - /* Enable PSR on the panel */ - intel_edp_psr_enable_sink(intel_dp); - - /* Enable PSR on the host */ - intel_edp_psr_enable_source(intel_dp); - - dev_priv->psr.active = true; -} - -void intel_edp_psr_enable(struct intel_dp *intel_dp) -{ - struct drm_device *dev = intel_dp_to_dev(intel_dp); - struct drm_i915_private *dev_priv = dev->dev_private; - - if (!HAS_PSR(dev)) { - DRM_DEBUG_KMS("PSR not supported on this platform\n"); - return; - } - - if (!is_edp_psr(intel_dp)) { - DRM_DEBUG_KMS("PSR not supported by this panel\n"); - return; - } - - mutex_lock(&dev_priv->psr.lock); - if (dev_priv->psr.enabled) { - DRM_DEBUG_KMS("PSR already in use\n"); - mutex_unlock(&dev_priv->psr.lock); - return; - } - - dev_priv->psr.busy_frontbuffer_bits = 0; - - /* Setup PSR once */ - intel_edp_psr_setup(intel_dp); - - if (intel_edp_psr_match_conditions(intel_dp)) - dev_priv->psr.enabled = intel_dp; - mutex_unlock(&dev_priv->psr.lock); -} - -void intel_edp_psr_disable(struct intel_dp *intel_dp) -{ - struct drm_device *dev = intel_dp_to_dev(intel_dp); - struct drm_i915_private *dev_priv = dev->dev_private; - - mutex_lock(&dev_priv->psr.lock); - if (!dev_priv->psr.enabled) { - mutex_unlock(&dev_priv->psr.lock); - return; - } - - if (dev_priv->psr.active) { - I915_WRITE(EDP_PSR_CTL(dev), - I915_READ(EDP_PSR_CTL(dev)) & ~EDP_PSR_ENABLE); - - /* Wait till PSR is idle */ - if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev)) & - EDP_PSR_STATUS_STATE_MASK) == 0, 2000, 10)) - DRM_ERROR("Timed out waiting for PSR Idle State\n"); - - dev_priv->psr.active = false; - } else { - WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE); - } - - dev_priv->psr.enabled = NULL; - mutex_unlock(&dev_priv->psr.lock); - - cancel_delayed_work_sync(&dev_priv->psr.work); -} - -static void intel_edp_psr_work(struct work_struct *work) -{ - struct drm_i915_private *dev_priv = - container_of(work, typeof(*dev_priv), psr.work.work); - struct intel_dp *intel_dp = dev_priv->psr.enabled; - - mutex_lock(&dev_priv->psr.lock); - intel_dp = dev_priv->psr.enabled; - - if (!intel_dp) - goto unlock; - - /* - * The delayed work can race with an invalidate hence we need to - * recheck. Since psr_flush first clears this and then reschedules we - * won't ever miss a flush when bailing out here. - */ - if (dev_priv->psr.busy_frontbuffer_bits) - goto unlock; - - intel_edp_psr_do_enable(intel_dp); -unlock: - mutex_unlock(&dev_priv->psr.lock); -} - -static void intel_edp_psr_do_exit(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - - if (dev_priv->psr.active) { - u32 val = I915_READ(EDP_PSR_CTL(dev)); - - WARN_ON(!(val & EDP_PSR_ENABLE)); - - I915_WRITE(EDP_PSR_CTL(dev), val & ~EDP_PSR_ENABLE); - - dev_priv->psr.active = false; - } - -} - -void intel_edp_psr_invalidate(struct drm_device *dev, - unsigned frontbuffer_bits) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_crtc *crtc; - enum pipe pipe; - - mutex_lock(&dev_priv->psr.lock); - if (!dev_priv->psr.enabled) { - mutex_unlock(&dev_priv->psr.lock); - return; - } - - crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc; - pipe = to_intel_crtc(crtc)->pipe; - - intel_edp_psr_do_exit(dev); - - frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe); - - dev_priv->psr.busy_frontbuffer_bits |= frontbuffer_bits; - mutex_unlock(&dev_priv->psr.lock); -} - -void intel_edp_psr_flush(struct drm_device *dev, - unsigned frontbuffer_bits) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_crtc *crtc; - enum pipe pipe; - - mutex_lock(&dev_priv->psr.lock); - if (!dev_priv->psr.enabled) { - mutex_unlock(&dev_priv->psr.lock); - return; - } - - crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc; - pipe = to_intel_crtc(crtc)->pipe; - dev_priv->psr.busy_frontbuffer_bits &= ~frontbuffer_bits; - - /* - * On Haswell sprite plane updates don't result in a psr invalidating - * signal in the hardware. Which means we need to manually fake this in - * software for all flushes, not just when we've seen a preceding - * invalidation through frontbuffer rendering. - */ - if (IS_HASWELL(dev) && - (frontbuffer_bits & INTEL_FRONTBUFFER_SPRITE(pipe))) - intel_edp_psr_do_exit(dev); - - if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits) - schedule_delayed_work(&dev_priv->psr.work, - msecs_to_jiffies(100)); - mutex_unlock(&dev_priv->psr.lock); -} - -void intel_edp_psr_init(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - - INIT_DELAYED_WORK(&dev_priv->psr.work, intel_edp_psr_work); - mutex_init(&dev_priv->psr.lock); -} - static void intel_disable_dp(struct intel_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); struct drm_device *dev = encoder->base.dev; + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); + + if (crtc->config.has_audio) + intel_audio_codec_disable(encoder); /* Make sure the panel is off before trying to change the mode. But also * ensure that we have vdd while we switch off the panel. */ @@ -2467,14 +2258,23 @@ static void intel_dp_enable_port(struct intel_dp *intel_dp) struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; - intel_dp->DP |= DP_PORT_EN; - /* enable with pattern 1 (as per spec) */ _intel_dp_set_link_train(intel_dp, &intel_dp->DP, DP_TRAINING_PATTERN_1); I915_WRITE(intel_dp->output_reg, intel_dp->DP); POSTING_READ(intel_dp->output_reg); + + /* + * Magic for VLV/CHV. We _must_ first set up the register + * without actually enabling the port, and then do another + * write to enable the port. Otherwise link training will + * fail when the power sequencer is freshly used for this port. + */ + intel_dp->DP |= DP_PORT_EN; + + I915_WRITE(intel_dp->output_reg, intel_dp->DP); + POSTING_READ(intel_dp->output_reg); } static void intel_enable_dp(struct intel_encoder *encoder) @@ -2482,19 +2282,38 @@ static void intel_enable_dp(struct intel_encoder *encoder) struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); uint32_t dp_reg = I915_READ(intel_dp->output_reg); if (WARN_ON(dp_reg & DP_PORT_EN)) return; + pps_lock(intel_dp); + + if (IS_VALLEYVIEW(dev)) + vlv_init_panel_power_sequencer(intel_dp); + intel_dp_enable_port(intel_dp); - intel_edp_panel_vdd_on(intel_dp); - intel_edp_panel_on(intel_dp); - intel_edp_panel_vdd_off(intel_dp, true); + + edp_panel_vdd_on(intel_dp); + edp_panel_on(intel_dp); + edp_panel_vdd_off(intel_dp, true); + + pps_unlock(intel_dp); + + if (IS_VALLEYVIEW(dev)) + vlv_wait_port_ready(dev_priv, dp_to_dig_port(intel_dp)); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); intel_dp_stop_link_train(intel_dp); + + if (crtc->config.has_audio) { + DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n", + pipe_name(crtc->pipe)); + intel_audio_codec_enable(encoder); + } } static void g4x_enable_dp(struct intel_encoder *encoder) @@ -2526,6 +2345,32 @@ static void g4x_pre_enable_dp(struct intel_encoder *encoder) } } +static void vlv_detach_power_sequencer(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_i915_private *dev_priv = intel_dig_port->base.base.dev->dev_private; + enum pipe pipe = intel_dp->pps_pipe; + int pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe); + + edp_panel_vdd_off_sync(intel_dp); + + /* + * VLV seems to get confused when multiple power seqeuencers + * have the same port selected (even if only one has power/vdd + * enabled). The failure manifests as vlv_wait_port_ready() failing + * CHV on the other hand doesn't seem to mind having the same port + * selected in multiple power seqeuencers, but let's clear the + * port select always when logically disconnecting a power sequencer + * from a port. + */ + DRM_DEBUG_KMS("detaching pipe %c power sequencer from port %c\n", + pipe_name(pipe), port_name(intel_dig_port->port)); + I915_WRITE(pp_on_reg, 0); + POSTING_READ(pp_on_reg); + + intel_dp->pps_pipe = INVALID_PIPE; +} + static void vlv_steal_power_sequencer(struct drm_device *dev, enum pipe pipe) { @@ -2534,6 +2379,9 @@ static void vlv_steal_power_sequencer(struct drm_device *dev, lockdep_assert_held(&dev_priv->pps_mutex); + if (WARN_ON(pipe != PIPE_A && pipe != PIPE_B)) + return; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { struct intel_dp *intel_dp; @@ -2551,10 +2399,12 @@ static void vlv_steal_power_sequencer(struct drm_device *dev, DRM_DEBUG_KMS("stealing pipe %c power sequencer from port %c\n", pipe_name(pipe), port_name(port)); - /* make sure vdd is off before we steal it */ - edp_panel_vdd_off_sync(intel_dp); + WARN(encoder->connectors_active, + "stealing pipe %c power sequencer from active eDP port %c\n", + pipe_name(pipe), port_name(port)); - intel_dp->pps_pipe = INVALID_PIPE; + /* make sure vdd is off before we steal it */ + vlv_detach_power_sequencer(intel_dp); } } @@ -2565,10 +2415,12 @@ static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp) struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); - struct edp_power_seq power_seq; lockdep_assert_held(&dev_priv->pps_mutex); + if (!is_edp(intel_dp)) + return; + if (intel_dp->pps_pipe == crtc->pipe) return; @@ -2578,7 +2430,7 @@ static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp) * we still have control of it. */ if (intel_dp->pps_pipe != INVALID_PIPE) - edp_panel_vdd_off_sync(intel_dp); + vlv_detach_power_sequencer(intel_dp); /* * We may be stealing the power @@ -2593,9 +2445,8 @@ static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp) pipe_name(intel_dp->pps_pipe), port_name(intel_dig_port->port)); /* init power sequencer on this pipe and port */ - intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq); - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, - &power_seq); + intel_dp_init_panel_power_sequencer(dev, intel_dp); + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp); } static void vlv_pre_enable_dp(struct intel_encoder *encoder) @@ -2624,15 +2475,7 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder) mutex_unlock(&dev_priv->dpio_lock); - if (is_edp(intel_dp)) { - pps_lock(intel_dp); - vlv_init_panel_power_sequencer(intel_dp); - pps_unlock(intel_dp); - } - intel_enable_dp(encoder); - - vlv_wait_port_ready(dev_priv, dport); } static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder) @@ -2680,6 +2523,15 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder) mutex_lock(&dev_priv->dpio_lock); + /* allow hardware to manage TX FIFO reset source */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch)); + val &= ~DPIO_LANEDESKEW_STRAP_OVRD; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch)); + val &= ~DPIO_LANEDESKEW_STRAP_OVRD; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val); + /* Deassert soft data lane reset*/ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch)); val |= CHV_PCS_REQ_SOFTRESET_EN; @@ -2715,15 +2567,7 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder) mutex_unlock(&dev_priv->dpio_lock); - if (is_edp(intel_dp)) { - pps_lock(intel_dp); - vlv_init_panel_power_sequencer(intel_dp); - pps_unlock(intel_dp); - } - intel_enable_dp(encoder); - - vlv_wait_port_ready(dev_priv, dport); } static void chv_dp_pre_pll_enable(struct intel_encoder *encoder) @@ -2843,7 +2687,9 @@ intel_dp_voltage_max(struct intel_dp *intel_dp) struct drm_device *dev = intel_dp_to_dev(intel_dp); enum port port = dp_to_dig_port(intel_dp)->port; - if (IS_VALLEYVIEW(dev)) + if (INTEL_INFO(dev)->gen >= 9) + return DP_TRAIN_VOLTAGE_SWING_LEVEL_2; + else if (IS_VALLEYVIEW(dev)) return DP_TRAIN_VOLTAGE_SWING_LEVEL_3; else if (IS_GEN7(dev) && port == PORT_A) return DP_TRAIN_VOLTAGE_SWING_LEVEL_2; @@ -2859,7 +2705,18 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) struct drm_device *dev = intel_dp_to_dev(intel_dp); enum port port = dp_to_dig_port(intel_dp)->port; - if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { + if (INTEL_INFO(dev)->gen >= 9) { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + return DP_TRAIN_PRE_EMPH_LEVEL_3; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: + return DP_TRAIN_PRE_EMPH_LEVEL_2; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: + return DP_TRAIN_PRE_EMPH_LEVEL_1; + default: + return DP_TRAIN_PRE_EMPH_LEVEL_0; + } + } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: return DP_TRAIN_PRE_EMPH_LEVEL_3; @@ -3095,12 +2952,26 @@ static uint32_t intel_chv_signal_levels(struct intel_dp *intel_dp) /* Clear calc init */ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch)); val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3); + val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK); + val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5; vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val); val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch)); val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3); + val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK); + val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5; vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val); + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch)); + val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK); + val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000; + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val); + + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch)); + val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK); + val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000; + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val); + /* Program swing deemph */ for (i = 0; i < 4; i++) { val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i)); @@ -3341,7 +3212,7 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP) uint32_t signal_levels, mask; uint8_t train_set = intel_dp->train_set[0]; - if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { + if (IS_HASWELL(dev) || IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) { signal_levels = intel_hsw_signal_levels(train_set); mask = DDI_BUF_EMP_MASK; } else if (IS_CHERRYVIEW(dev)) { @@ -3605,7 +3476,6 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) /* Try 5 times, then try clock recovery if that fails */ if (tries > 5) { - intel_dp_link_down(intel_dp); intel_dp_start_link_train(intel_dp); intel_dp_set_link_train(intel_dp, &DP, training_pattern | @@ -3763,8 +3633,6 @@ intel_dp_probe_oui(struct intel_dp *intel_dp) if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT)) return; - intel_edp_panel_vdd_on(intel_dp); - if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_SINK_OUI, buf, 3) == 3) DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n", buf[0], buf[1], buf[2]); @@ -3772,8 +3640,6 @@ intel_dp_probe_oui(struct intel_dp *intel_dp) if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_BRANCH_OUI, buf, 3) == 3) DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n", buf[0], buf[1], buf[2]); - - intel_edp_panel_vdd_off(intel_dp, false); } static bool @@ -3787,7 +3653,6 @@ intel_dp_probe_mst(struct intel_dp *intel_dp) if (intel_dp->dpcd[DP_DPCD_REV] < 0x12) return false; - intel_edp_panel_vdd_on(intel_dp); if (intel_dp_dpcd_read_wake(&intel_dp->aux, DP_MSTM_CAP, buf, 1)) { if (buf[0] & DP_MST_CAP) { DRM_DEBUG_KMS("Sink is MST capable\n"); @@ -3797,7 +3662,6 @@ intel_dp_probe_mst(struct intel_dp *intel_dp) intel_dp->is_mst = false; } } - intel_edp_panel_vdd_off(intel_dp, false); drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst); return intel_dp->is_mst; @@ -3809,26 +3673,48 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc) struct drm_device *dev = intel_dig_port->base.base.dev; struct intel_crtc *intel_crtc = to_intel_crtc(intel_dig_port->base.base.crtc); - u8 buf[1]; + u8 buf; + int test_crc_count; + int attempts = 6; - if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, buf) < 0) + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0) return -EIO; - if (!(buf[0] & DP_TEST_CRC_SUPPORTED)) + if (!(buf & DP_TEST_CRC_SUPPORTED)) return -ENOTTY; + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0) + return -EIO; + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK, - DP_TEST_SINK_START) < 0) + buf | DP_TEST_SINK_START) < 0) + return -EIO; + + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0) return -EIO; + test_crc_count = buf & DP_TEST_COUNT_MASK; - /* Wait 2 vblanks to be sure we will have the correct CRC value */ - intel_wait_for_vblank(dev, intel_crtc->pipe); - intel_wait_for_vblank(dev, intel_crtc->pipe); + do { + if (drm_dp_dpcd_readb(&intel_dp->aux, + DP_TEST_SINK_MISC, &buf) < 0) + return -EIO; + intel_wait_for_vblank(dev, intel_crtc->pipe); + } while (--attempts && (buf & DP_TEST_COUNT_MASK) == test_crc_count); + + if (attempts == 0) { + DRM_DEBUG_KMS("Panel is unable to calculate CRC after 6 vblanks\n"); + return -ETIMEDOUT; + } if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0) return -EIO; - drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK, 0); + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0) + return -EIO; + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK, + buf & ~DP_TEST_SINK_START) < 0) + return -EIO; + return 0; } @@ -4450,14 +4336,58 @@ static void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder) * vdd might still be enabled do to the delayed vdd off. * Make sure vdd is actually turned off here. */ + cancel_delayed_work_sync(&intel_dp->panel_vdd_work); pps_lock(intel_dp); edp_panel_vdd_off_sync(intel_dp); pps_unlock(intel_dp); } +static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp) +{ + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = intel_dig_port->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain power_domain; + + lockdep_assert_held(&dev_priv->pps_mutex); + + if (!edp_have_panel_vdd(intel_dp)) + return; + + /* + * The VDD bit needs a power domain reference, so if the bit is + * already enabled when we boot or resume, grab this reference and + * schedule a vdd off, so we don't hold on to the reference + * indefinitely. + */ + DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n"); + power_domain = intel_display_port_power_domain(&intel_dig_port->base); + intel_display_power_get(dev_priv, power_domain); + + edp_panel_vdd_schedule_off(intel_dp); +} + static void intel_dp_encoder_reset(struct drm_encoder *encoder) { - intel_edp_panel_vdd_sanitize(to_intel_encoder(encoder)); + struct intel_dp *intel_dp; + + if (to_intel_encoder(encoder)->type != INTEL_OUTPUT_EDP) + return; + + intel_dp = enc_to_intel_dp(encoder); + + pps_lock(intel_dp); + + /* + * Read out the current power sequencer assignment, + * in case the BIOS did something with it. + */ + if (IS_VALLEYVIEW(encoder->dev)) + vlv_initial_power_sequencer_setup(intel_dp); + + intel_edp_panel_vdd_sanitize(intel_dp); + + pps_unlock(intel_dp); } static const struct drm_connector_funcs intel_dp_connector_funcs = { @@ -4644,16 +4574,20 @@ static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp) static void intel_dp_init_panel_power_sequencer(struct drm_device *dev, - struct intel_dp *intel_dp, - struct edp_power_seq *out) + struct intel_dp *intel_dp) { struct drm_i915_private *dev_priv = dev->dev_private; - struct edp_power_seq cur, vbt, spec, final; + struct edp_power_seq cur, vbt, spec, + *final = &intel_dp->pps_delays; u32 pp_on, pp_off, pp_div, pp; int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg; lockdep_assert_held(&dev_priv->pps_mutex); + /* already initialized? */ + if (final->t11_t12 != 0) + return; + if (HAS_PCH_SPLIT(dev)) { pp_ctrl_reg = PCH_PP_CONTROL; pp_on_reg = PCH_PP_ON_DELAYS; @@ -4715,7 +4649,7 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, /* Use the max of the register settings and vbt. If both are * unset, fall back to the spec limits. */ -#define assign_final(field) final.field = (max(cur.field, vbt.field) == 0 ? \ +#define assign_final(field) final->field = (max(cur.field, vbt.field) == 0 ? \ spec.field : \ max(cur.field, vbt.field)) assign_final(t1_t3); @@ -4725,7 +4659,7 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, assign_final(t11_t12); #undef assign_final -#define get_delay(field) (DIV_ROUND_UP(final.field, 10)) +#define get_delay(field) (DIV_ROUND_UP(final->field, 10)) intel_dp->panel_power_up_delay = get_delay(t1_t3); intel_dp->backlight_on_delay = get_delay(t8); intel_dp->backlight_off_delay = get_delay(t9); @@ -4739,21 +4673,18 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev, DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); - - if (out) - *out = final; } static void intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev, - struct intel_dp *intel_dp, - struct edp_power_seq *seq) + struct intel_dp *intel_dp) { struct drm_i915_private *dev_priv = dev->dev_private; u32 pp_on, pp_off, pp_div, port_sel = 0; int div = HAS_PCH_SPLIT(dev) ? intel_pch_rawclk(dev) : intel_hrawclk(dev); int pp_on_reg, pp_off_reg, pp_div_reg; enum port port = dp_to_dig_port(intel_dp)->port; + const struct edp_power_seq *seq = &intel_dp->pps_delays; lockdep_assert_held(&dev_priv->pps_mutex); @@ -4836,7 +4767,7 @@ void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate) * hard to tell without seeing the user of this function of this code. * Check locking and ordering once that lands. */ - if (INTEL_INFO(dev)->gen < 8 && intel_edp_is_psr_enabled(dev)) { + if (INTEL_INFO(dev)->gen < 8 && intel_psr_is_enabled(dev)) { DRM_DEBUG_KMS("DRRS is disabled as PSR is enabled\n"); return; } @@ -4939,40 +4870,8 @@ intel_dp_drrs_init(struct intel_digital_port *intel_dig_port, return downclock_mode; } -void intel_edp_panel_vdd_sanitize(struct intel_encoder *intel_encoder) -{ - struct drm_device *dev = intel_encoder->base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_dp *intel_dp; - enum intel_display_power_domain power_domain; - - if (intel_encoder->type != INTEL_OUTPUT_EDP) - return; - - intel_dp = enc_to_intel_dp(&intel_encoder->base); - - pps_lock(intel_dp); - - if (!edp_have_panel_vdd(intel_dp)) - goto out; - /* - * The VDD bit needs a power domain reference, so if the bit is - * already enabled when we boot or resume, grab this reference and - * schedule a vdd off, so we don't hold on to the reference - * indefinitely. - */ - DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n"); - power_domain = intel_display_port_power_domain(intel_encoder); - intel_display_power_get(dev_priv, power_domain); - - edp_panel_vdd_schedule_off(intel_dp); - out: - pps_unlock(intel_dp); -} - static bool intel_edp_init_connector(struct intel_dp *intel_dp, - struct intel_connector *intel_connector, - struct edp_power_seq *power_seq) + struct intel_connector *intel_connector) { struct drm_connector *connector = &intel_connector->base; struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); @@ -4984,18 +4883,19 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, bool has_dpcd; struct drm_display_mode *scan; struct edid *edid; + enum pipe pipe = INVALID_PIPE; intel_dp->drrs_state.type = DRRS_NOT_SUPPORTED; if (!is_edp(intel_dp)) return true; - intel_edp_panel_vdd_sanitize(intel_encoder); + pps_lock(intel_dp); + intel_edp_panel_vdd_sanitize(intel_dp); + pps_unlock(intel_dp); /* Cache DPCD and EDID for edp. */ - intel_edp_panel_vdd_on(intel_dp); has_dpcd = intel_dp_get_dpcd(intel_dp); - intel_edp_panel_vdd_off(intel_dp, false); if (has_dpcd) { if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) @@ -5010,7 +4910,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, /* We now know it's not a ghost, init power sequence regs. */ pps_lock(intel_dp); - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, power_seq); + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp); pps_unlock(intel_dp); mutex_lock(&dev->mode_config.mutex); @@ -5052,11 +4952,30 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp, if (IS_VALLEYVIEW(dev)) { intel_dp->edp_notifier.notifier_call = edp_notify_handler; register_reboot_notifier(&intel_dp->edp_notifier); + + /* + * Figure out the current pipe for the initial backlight setup. + * If the current pipe isn't valid, try the PPS pipe, and if that + * fails just assume pipe A. + */ + if (IS_CHERRYVIEW(dev)) + pipe = DP_PORT_TO_PIPE_CHV(intel_dp->DP); + else + pipe = PORT_TO_PIPE(intel_dp->DP); + + if (pipe != PIPE_A && pipe != PIPE_B) + pipe = intel_dp->pps_pipe; + + if (pipe != PIPE_A && pipe != PIPE_B) + pipe = PIPE_A; + + DRM_DEBUG_KMS("using pipe %c for initial backlight setup\n", + pipe_name(pipe)); } intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); intel_connector->panel.backlight_power = intel_edp_backlight_power; - intel_panel_setup_backlight(connector); + intel_panel_setup_backlight(connector, pipe); return true; } @@ -5071,13 +4990,14 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; enum port port = intel_dig_port->port; - struct edp_power_seq power_seq = { 0 }; int type; intel_dp->pps_pipe = INVALID_PIPE; /* intel_dp vfuncs */ - if (IS_VALLEYVIEW(dev)) + if (INTEL_INFO(dev)->gen >= 9) + intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider; + else if (IS_VALLEYVIEW(dev)) intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider; else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider; @@ -5086,7 +5006,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, else intel_dp->get_aux_clock_divider = i9xx_get_aux_clock_divider; - intel_dp->get_aux_send_ctl = i9xx_get_aux_send_ctl; + if (INTEL_INFO(dev)->gen >= 9) + intel_dp->get_aux_send_ctl = skl_get_aux_send_ctl; + else + intel_dp->get_aux_send_ctl = i9xx_get_aux_send_ctl; /* Preserve the current hw state. */ intel_dp->DP = I915_READ(intel_dp->output_reg); @@ -5105,6 +5028,11 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, if (type == DRM_MODE_CONNECTOR_eDP) intel_encoder->type = INTEL_OUTPUT_EDP; + /* eDP only on port B and/or C on vlv/chv */ + if (WARN_ON(IS_VALLEYVIEW(dev) && is_edp(intel_dp) && + port != PORT_B && port != PORT_C)) + return false; + DRM_DEBUG_KMS("Adding %s connector on port %c\n", type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP", port_name(port)); @@ -5147,13 +5075,11 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, if (is_edp(intel_dp)) { pps_lock(intel_dp); - if (IS_VALLEYVIEW(dev)) { + intel_dp_init_panel_power_timestamps(intel_dp); + if (IS_VALLEYVIEW(dev)) vlv_initial_power_sequencer_setup(intel_dp); - } else { - intel_dp_init_panel_power_timestamps(intel_dp); - intel_dp_init_panel_power_sequencer(dev, intel_dp, - &power_seq); - } + else + intel_dp_init_panel_power_sequencer(dev, intel_dp); pps_unlock(intel_dp); } @@ -5167,7 +5093,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, } } - if (!intel_edp_init_connector(intel_dp, intel_connector, &power_seq)) { + if (!intel_edp_init_connector(intel_dp, intel_connector)) { drm_dp_aux_unregister(&intel_dp->aux); if (is_edp(intel_dp)) { cancel_delayed_work_sync(&intel_dp->panel_vdd_work); |