diff options
Diffstat (limited to 'drivers/gpio/gpio-stmpe.c')
-rw-r--r-- | drivers/gpio/gpio-stmpe.c | 167 |
1 files changed, 120 insertions, 47 deletions
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c index f675132de10e..5c0d8189a304 100644 --- a/drivers/gpio/gpio-stmpe.c +++ b/drivers/gpio/gpio-stmpe.c @@ -20,6 +20,8 @@ */ enum { REG_RE, REG_FE, REG_IE }; +enum { LSB, CSB, MSB }; + #define CACHE_NR_REGS 3 /* No variant has more than 24 GPIOs */ #define CACHE_NR_BANKS (24 / 8) @@ -39,7 +41,7 @@ static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; - u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB] - (offset / 8); + u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)]; u8 mask = 1 << (offset % 8); int ret; @@ -55,7 +57,7 @@ static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB; - u8 reg = stmpe->regs[which] - (offset / 8); + u8 reg = stmpe->regs[which + (offset / 8)]; u8 mask = 1 << (offset % 8); /* @@ -89,7 +91,7 @@ static int stmpe_gpio_direction_output(struct gpio_chip *chip, { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; - u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; u8 mask = 1 << (offset % 8); stmpe_gpio_set(chip, offset, val); @@ -102,7 +104,7 @@ static int stmpe_gpio_direction_input(struct gpio_chip *chip, { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; - u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; u8 mask = 1 << (offset % 8); return stmpe_set_bits(stmpe, reg, mask, 0); @@ -142,8 +144,9 @@ static int stmpe_gpio_irq_set_type(struct irq_data *d, unsigned int type) if (type & IRQ_TYPE_LEVEL_LOW || type & IRQ_TYPE_LEVEL_HIGH) return -EINVAL; - /* STMPE801 doesn't have RE and FE registers */ - if (stmpe_gpio->stmpe->partnum == STMPE801) + /* STMPE801 and STMPE 1600 don't have RE and FE registers */ + if (stmpe_gpio->stmpe->partnum == STMPE801 || + stmpe_gpio->stmpe->partnum == STMPE1600) return 0; if (type & IRQ_TYPE_EDGE_RISING) @@ -173,17 +176,24 @@ static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); struct stmpe *stmpe = stmpe_gpio->stmpe; int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); - static const u8 regmap[] = { - [REG_RE] = STMPE_IDX_GPRER_LSB, - [REG_FE] = STMPE_IDX_GPFER_LSB, - [REG_IE] = STMPE_IDX_IEGPIOR_LSB, + static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = { + [REG_RE][LSB] = STMPE_IDX_GPRER_LSB, + [REG_RE][CSB] = STMPE_IDX_GPRER_CSB, + [REG_RE][MSB] = STMPE_IDX_GPRER_MSB, + [REG_FE][LSB] = STMPE_IDX_GPFER_LSB, + [REG_FE][CSB] = STMPE_IDX_GPFER_CSB, + [REG_FE][MSB] = STMPE_IDX_GPFER_MSB, + [REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB, + [REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB, + [REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB, }; int i, j; for (i = 0; i < CACHE_NR_REGS; i++) { - /* STMPE801 doesn't have RE and FE registers */ - if ((stmpe->partnum == STMPE801) && - (i != REG_IE)) + /* STMPE801 and STMPE1600 don't have RE and FE registers */ + if ((stmpe->partnum == STMPE801 || + stmpe->partnum == STMPE1600) && + (i != REG_IE)) continue; for (j = 0; j < num_banks; j++) { @@ -194,7 +204,7 @@ static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) continue; stmpe_gpio->oldregs[i][j] = new; - stmpe_reg_write(stmpe, stmpe->regs[regmap[i]] - j, new); + stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new); } } @@ -216,11 +226,21 @@ static void stmpe_gpio_irq_unmask(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); + struct stmpe *stmpe = stmpe_gpio->stmpe; int offset = d->hwirq; int regoffset = offset / 8; int mask = 1 << (offset % 8); stmpe_gpio->regs[REG_IE][regoffset] |= mask; + + /* + * STMPE1600 workaround: to be able to get IRQ from pins, + * a read must be done on GPMR register, or a write in + * GPSR or GPCR registers + */ + if (stmpe->partnum == STMPE1600) + stmpe_reg_read(stmpe, + stmpe->regs[STMPE_IDX_GPMR_LSB + regoffset]); } static void stmpe_dbg_show_one(struct seq_file *s, @@ -230,9 +250,9 @@ static void stmpe_dbg_show_one(struct seq_file *s, struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); struct stmpe *stmpe = stmpe_gpio->stmpe; const char *label = gpiochip_is_requested(gc, offset); - int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); bool val = !!stmpe_gpio_get(gc, offset); - u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); + u8 bank = offset / 8; + u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank]; u8 mask = 1 << (offset % 8); int ret; u8 dir; @@ -247,39 +267,72 @@ static void stmpe_dbg_show_one(struct seq_file *s, gpio, label ?: "(none)", val ? "hi" : "lo"); } else { - u8 edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_MSB] + num_banks - 1 - (offset / 8); - u8 rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB] - (offset / 8); - u8 fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB] - (offset / 8); - u8 irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB] - (offset / 8); - bool edge_det; - bool rise; - bool fall; + u8 edge_det_reg; + u8 rise_reg; + u8 fall_reg; + u8 irqen_reg; + + char *edge_det_values[] = {"edge-inactive", + "edge-asserted", + "not-supported"}; + char *rise_values[] = {"no-rising-edge-detection", + "rising-edge-detection", + "not-supported"}; + char *fall_values[] = {"no-falling-edge-detection", + "falling-edge-detection", + "not-supported"}; + #define NOT_SUPPORTED_IDX 2 + u8 edge_det = NOT_SUPPORTED_IDX; + u8 rise = NOT_SUPPORTED_IDX; + u8 fall = NOT_SUPPORTED_IDX; bool irqen; - ret = stmpe_reg_read(stmpe, edge_det_reg); - if (ret < 0) - return; - edge_det = !!(ret & mask); - ret = stmpe_reg_read(stmpe, rise_reg); - if (ret < 0) + switch (stmpe->partnum) { + case STMPE610: + case STMPE811: + case STMPE1601: + case STMPE2401: + case STMPE2403: + edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank]; + ret = stmpe_reg_read(stmpe, edge_det_reg); + if (ret < 0) + return; + edge_det = !!(ret & mask); + + case STMPE1801: + rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank]; + fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank]; + + ret = stmpe_reg_read(stmpe, rise_reg); + if (ret < 0) + return; + rise = !!(ret & mask); + ret = stmpe_reg_read(stmpe, fall_reg); + if (ret < 0) + return; + fall = !!(ret & mask); + + case STMPE801: + case STMPE1600: + irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank]; + break; + + default: return; - rise = !!(ret & mask); - ret = stmpe_reg_read(stmpe, fall_reg); - if (ret < 0) - return; - fall = !!(ret & mask); + } + ret = stmpe_reg_read(stmpe, irqen_reg); if (ret < 0) return; irqen = !!(ret & mask); - seq_printf(s, " gpio-%-3d (%-20.20s) in %s %s %s%s%s", + seq_printf(s, " gpio-%-3d (%-20.20s) in %s %13s %13s %25s %25s", gpio, label ?: "(none)", val ? "hi" : "lo", - edge_det ? "edge-asserted" : "edge-inactive", - irqen ? "IRQ-enabled" : "", - rise ? " rising-edge-detection" : "", - fall ? " falling-edge-detection" : ""); + edge_det_values[edge_det], + irqen ? "IRQ-enabled" : "IRQ-disabled", + rise_values[rise], + fall_values[fall]); } } @@ -307,18 +360,32 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev) { struct stmpe_gpio *stmpe_gpio = dev; struct stmpe *stmpe = stmpe_gpio->stmpe; - u8 statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB]; + u8 statmsbreg; int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); u8 status[num_banks]; int ret; int i; + /* + * the stmpe_block_read() call below, imposes to set statmsbreg + * with the register located at the lowest address. As STMPE1600 + * variant is the only one which respect registers address's order + * (LSB regs located at lowest address than MSB ones) whereas all + * the others have a registers layout with MSB located before the + * LSB regs. + */ + if (stmpe->partnum == STMPE1600) + statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_LSB]; + else + statmsbreg = stmpe->regs[STMPE_IDX_ISGPIOR_MSB]; + ret = stmpe_block_read(stmpe, statmsbreg, num_banks, status); if (ret < 0) return IRQ_NONE; for (i = 0; i < num_banks; i++) { - int bank = num_banks - i - 1; + int bank = (stmpe_gpio->stmpe->partnum == STMPE1600) ? i : + num_banks - i - 1; unsigned int enabled = stmpe_gpio->regs[REG_IE][bank]; unsigned int stat = status[i]; @@ -336,12 +403,18 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev) stat &= ~(1 << bit); } - stmpe_reg_write(stmpe, statmsbreg + i, status[i]); - - /* Edge detect register is not present on 801 */ - if (stmpe->partnum != STMPE801) - stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_GPEDR_MSB] - + i, status[i]); + /* + * interrupt status register write has no effect on + * 801/1801/1600, bits are cleared when read. + * Edge detect register is not present on 801/1600/1801 + */ + if (stmpe->partnum != STMPE801 || stmpe->partnum != STMPE1600 || + stmpe->partnum != STMPE1801) { + stmpe_reg_write(stmpe, statmsbreg + i, status[i]); + stmpe_reg_write(stmpe, + stmpe->regs[STMPE_IDX_GPEDR_LSB + i], + status[i]); + } } return IRQ_HANDLED; |