diff options
Diffstat (limited to 'drivers/extcon/extcon-max77693.c')
| -rw-r--r-- | drivers/extcon/extcon-max77693.c | 37 |
1 files changed, 17 insertions, 20 deletions
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index af165fd0c6f5..a66bec8f6252 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -190,8 +190,8 @@ enum max77693_muic_acc_type { /* The below accessories have same ADC value so ADCLow and ADC1K bit is used to separate specific accessory */ /* ADC|VBVolot|ADCLow|ADC1K| */ - MAX77693_MUIC_GND_USB_OTG = 0x100, /* 0x0| 0| 0| 0| */ - MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* 0x0| 1| 0| 0| */ + MAX77693_MUIC_GND_USB_HOST = 0x100, /* 0x0| 0| 0| 0| */ + MAX77693_MUIC_GND_USB_HOST_VB = 0x104, /* 0x0| 1| 0| 0| */ MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* 0x0| 0| 1| 0| */ MAX77693_MUIC_GND_MHL = 0x103, /* 0x0| 0| 1| 1| */ MAX77693_MUIC_GND_MHL_VB = 0x107, /* 0x0| 1| 1| 1| */ @@ -228,7 +228,7 @@ static const char *max77693_extcon_cable[] = { [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger", [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream", [EXTCON_CABLE_MHL] = "MHL", - [EXTCON_CABLE_MHL_TA] = "MHL_TA", + [EXTCON_CABLE_MHL_TA] = "MHL-TA", [EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON", [EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF", [EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF", @@ -403,8 +403,8 @@ static int max77693_muic_get_cable_type(struct max77693_muic_info *info, /** * [0x1|VBVolt|ADCLow|ADC1K] - * [0x1| 0| 0| 0] USB_OTG - * [0x1| 1| 0| 0] USB_OTG_VB + * [0x1| 0| 0| 0] USB_HOST + * [0x1| 1| 0| 0] USB_HSOT_VB * [0x1| 0| 1| 0] Audio Video cable with load * [0x1| 0| 1| 1] MHL without charging cable * [0x1| 1| 1| 1] MHL with charging cable @@ -523,7 +523,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info, * - Support charging and data connection through micro-usb port * if USB cable is connected between target and host * device. - * - Support OTG device (Mouse/Keyboard) + * - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard) */ ret = max77693_muic_set_path(info, info->path_usb, attached); if (ret < 0) @@ -609,9 +609,9 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info) MAX77693_CABLE_GROUP_ADC_GND, &attached); switch (cable_type_gnd) { - case MAX77693_MUIC_GND_USB_OTG: - case MAX77693_MUIC_GND_USB_OTG_VB: - /* USB_OTG, PATH: AP_USB */ + case MAX77693_MUIC_GND_USB_HOST: + case MAX77693_MUIC_GND_USB_HOST_VB: + /* USB_HOST, PATH: AP_USB */ ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); if (ret < 0) return ret; @@ -704,7 +704,7 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info) switch (cable_type) { case MAX77693_MUIC_ADC_GROUND: - /* USB_OTG/MHL/Audio */ + /* USB_HOST/MHL/Audio */ max77693_muic_adc_ground_handler(info); break; case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: @@ -823,19 +823,19 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) case MAX77693_MUIC_GND_MHL: case MAX77693_MUIC_GND_MHL_VB: /* - * MHL cable with MHL_TA(USB/TA) cable + * MHL cable with MHL-TA(USB/TA) cable * - MHL cable include two port(HDMI line and separate * micro-usb port. When the target connect MHL cable, - * extcon driver check whether MHL_TA(USB/TA) cable is - * connected. If MHL_TA cable is connected, extcon + * extcon driver check whether MHL-TA(USB/TA) cable is + * connected. If MHL-TA cable is connected, extcon * driver notify state to notifiee for charging battery. * - * Features of 'MHL_TA(USB/TA) with MHL cable' + * Features of 'MHL-TA(USB/TA) with MHL cable' * - Support MHL * - Support charging through micro-usb port without * data connection */ - extcon_set_cable_state(info->edev, "MHL_TA", attached); + extcon_set_cable_state(info->edev, "MHL-TA", attached); if (!cable_attached) extcon_set_cable_state(info->edev, "MHL", cable_attached); @@ -886,7 +886,7 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) * - Support charging and data connection through micro- * usb port if USB cable is connected between target * and host device - * - Support OTG device (Mouse/Keyboard) + * - Support OTG(On-The-Go) device (Ex: Mouse/Keyboard) */ ret = max77693_muic_set_path(info, info->path_usb, attached); @@ -1019,8 +1019,6 @@ static void max77693_muic_irq_work(struct work_struct *work) dev_err(info->dev, "failed to handle MUIC interrupt\n"); mutex_unlock(&info->mutex); - - return; } static irqreturn_t max77693_muic_irq_handler(int irq, void *data) @@ -1171,8 +1169,7 @@ static int max77693_muic_probe(struct platform_device *pdev) muic_irq->name, info); if (ret) { dev_err(&pdev->dev, - "failed: irq request (IRQ: %d," - " error :%d)\n", + "failed: irq request (IRQ: %d, error :%d)\n", muic_irq->irq, ret); return ret; } |