diff options
Diffstat (limited to 'drivers/ata/pata_hpt37x.c')
| -rw-r--r-- | drivers/ata/pata_hpt37x.c | 18 |
1 files changed, 16 insertions, 2 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index f242157bc81b..9d371859e81e 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -920,6 +920,20 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_write_config_byte(dev, 0x5a, irqmask); /* + * HPT371 chips physically have only one channel, the secondary one, + * but the primary channel registers do exist! Go figure... + * So, we manually disable the non-existing channel here + * (if the BIOS hasn't done this already). + */ + if (dev->device == PCI_DEVICE_ID_TTI_HPT371) { + u8 mcr1; + + pci_read_config_byte(dev, 0x50, &mcr1); + mcr1 &= ~0x04; + pci_write_config_byte(dev, 0x50, mcr1); + } + + /* * default to pci clock. make sure MA15/16 are set to output * to prevent drives having problems with 40-pin cables. Needed * for some drives such as IBM-DTLA which will not enter ready @@ -950,14 +964,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) if ((freq >> 12) != 0xABCDE) { int i; - u8 sr; + u16 sr; u32 total = 0; pr_warn("BIOS has not set timing clocks\n"); /* This is the process the HPT371 BIOS is reported to use */ for (i = 0; i < 128; i++) { - pci_read_config_byte(dev, 0x78, &sr); + pci_read_config_word(dev, 0x78, &sr); total += sr & 0x1FF; udelay(15); } |