diff options
Diffstat (limited to 'arch')
56 files changed, 265 insertions, 992 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 8543bc3c21fe..c6148166a7b4 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -3,6 +3,14 @@ # General architecture dependent options # +# +# Note: arch/$(SRCARCH)/Kconfig needs to be included first so that it can +# override the default values in this file. +# +source "arch/$(SRCARCH)/Kconfig" + +menu "General architecture-dependent options" + config CRASH_CORE bool @@ -734,6 +742,9 @@ config COMPAT_32BIT_TIME config ARCH_NO_COHERENT_DMA_MMAP bool +config ARCH_NO_PREEMPT + bool + config CPU_NO_EFFICIENT_FFS def_bool n @@ -833,3 +844,5 @@ config REFCOUNT_FULL source "kernel/gcov/Kconfig" source "scripts/gcc-plugins/Kconfig" + +endmenu diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 04a4a138ed13..5b4f88363453 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -4,6 +4,7 @@ config ALPHA default y select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_MIGHT_HAVE_PC_SERIO + select ARCH_NO_PREEMPT select ARCH_USE_CMPXCHG_LOCKREF select HAVE_AOUT select HAVE_IDE @@ -74,9 +75,6 @@ config PGTABLE_LEVELS int default 3 -source "init/Kconfig" -source "kernel/Kconfig.freezer" - config AUDIT_ARCH bool @@ -573,8 +571,6 @@ config ARCH_DISCONTIGMEM_ENABLE or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa.rst> for more. -source "mm/Kconfig" - config NUMA bool "NUMA Support (EXPERIMENTAL)" depends on DISCONTIGMEM && BROKEN @@ -713,28 +709,11 @@ config SRM_ENV This driver is also available as a module and will be called srm_env then. -source "fs/Kconfig.binfmt" - endmenu -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/alpha/Kconfig.debug" - # DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig # but we also need it if VGA_HOSE is set config DUMMY_CONSOLE bool depends on VGA_HOSE default y - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" - diff --git a/arch/alpha/Kconfig.debug b/arch/alpha/Kconfig.debug index 5e93dffb818a..b88c7b641d72 100644 --- a/arch/alpha/Kconfig.debug +++ b/arch/alpha/Kconfig.debug @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" config EARLY_PRINTK bool @@ -39,5 +36,3 @@ config MATHEMU This option is required for IEEE compliant floating point arithmetic on the Alpha. The only time you would ever not say Y is to say M in order to debug the code. Say Y unless you know what you are doing. - -endmenu diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 5151d81476a1..6d5eb8267e42 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -97,9 +97,6 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE def_bool y depends on ARC_MMU_V4 -source "init/Kconfig" -source "kernel/Kconfig.freezer" - menu "ARC Architecture Configuration" menu "ARC Platform/SoC/Board" @@ -551,24 +548,13 @@ config ARC_BUILTIN_DTB_NAME Set the name of the DTB to embed in the vmlinux binary Leaving it blank selects the minimal "skeleton" dtb -source "kernel/Kconfig.preempt" - -menu "Executable file formats" -source "fs/Kconfig.binfmt" -endmenu - endmenu # "ARC Architecture Configuration" -source "mm/Kconfig" - config FORCE_MAX_ZONEORDER int "Maximum zone order" default "12" if ARC_HUGEPAGE_16M default "11" -source "net/Kconfig" -source "drivers/Kconfig" - menu "Bus Support" config PCI @@ -589,9 +575,4 @@ source "drivers/pci/Kconfig" endmenu -source "fs/Kconfig" -source "arch/arc/Kconfig.debug" -source "security/Kconfig" -source "crypto/Kconfig" -source "lib/Kconfig" source "kernel/power/Kconfig" diff --git a/arch/arc/Kconfig.debug b/arch/arc/Kconfig.debug index 03da1a6b3072..45add86decd5 100644 --- a/arch/arc/Kconfig.debug +++ b/arch/arc/Kconfig.debug @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" config 16KSTACKS bool "Use 16Kb for kernel stacks instead of 8Kb" @@ -11,5 +8,3 @@ config 16KSTACKS This increases the resident kernel footprint and will cause less threads to run on the system and also increase the pressure on the VM subsystem for higher order allocations. - -endmenu diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0f328d639d51..f69613fd4e68 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -299,10 +299,6 @@ config PGTABLE_LEVELS default 3 if ARM_LPAE default 2 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - menu "System Type" config MMU @@ -1481,8 +1477,6 @@ config ARCH_NR_GPIO If unsure, leave the default value. -source kernel/Kconfig.preempt - config HZ_FIXED int default 200 if ARCH_EBSA110 @@ -1717,8 +1711,6 @@ config ARM_MODULE_PLTS Disabling this is usually safe for small single-platform configurations. If unsure, say y. -source "mm/Kconfig" - config FORCE_MAX_ZONEORDER int "Maximum zone order" default "12" if SOC_AM33XX @@ -2171,12 +2163,6 @@ config KERNEL_MODE_NEON endmenu -menu "Userspace binary formats" - -source "fs/Kconfig.binfmt" - -endmenu - menu "Power management options" source "kernel/power/Kconfig" @@ -2197,23 +2183,10 @@ config ARCH_HIBERNATION_POSSIBLE endmenu -source "net/Kconfig" - -source "drivers/Kconfig" - source "drivers/firmware/Kconfig" -source "fs/Kconfig" - -source "arch/arm/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" if CRYPTO source "arch/arm/crypto/Kconfig" endif -source "lib/Kconfig" - source "arch/arm/kvm/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 693f84392f1b..b48dc083d1b1 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" config ARM_PTDUMP_CORE def_bool n @@ -1863,5 +1860,3 @@ config PID_IN_CONTEXTIDR are planning to use hardware trace tools with this kernel. source "drivers/hwtracing/coresight/Kconfig" - -endmenu diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 260ff5da92ac..d0a53cc6293a 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -279,10 +279,6 @@ config ARCH_SUPPORTS_UPROBES config ARCH_PROC_KCORE_TEXT def_bool y -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - source "arch/arm64/Kconfig.platforms" menu "Bus support" @@ -768,7 +764,6 @@ config HOLES_IN_ZONE def_bool y depends on NUMA -source kernel/Kconfig.preempt source kernel/Kconfig.hz config ARCH_SUPPORTS_DEBUG_PAGEALLOC @@ -806,8 +801,6 @@ config ARCH_WANT_HUGE_PMD_SHARE config ARCH_HAS_CACHE_LINE_SIZE def_bool y -source "mm/Kconfig" - config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" ---help--- @@ -1289,10 +1282,6 @@ config DMI endmenu -menu "Userspace binary formats" - -source "fs/Kconfig.binfmt" - config COMPAT bool "Kernel support for 32-bit EL0" depends on ARM64_4K_PAGES || EXPERT @@ -1316,8 +1305,6 @@ config SYSVIPC_COMPAT def_bool y depends on COMPAT && SYSVIPC -endmenu - menu "Power management options" source "kernel/power/Kconfig" @@ -1343,25 +1330,12 @@ source "drivers/cpufreq/Kconfig" endmenu -source "net/Kconfig" - -source "drivers/Kconfig" - source "drivers/firmware/Kconfig" source "drivers/acpi/Kconfig" -source "fs/Kconfig" - source "arch/arm64/kvm/Kconfig" -source "arch/arm64/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" if CRYPTO source "arch/arm64/crypto/Kconfig" endif - -source "lib/Kconfig" diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug index cc6bd559af85..69c9170bdd24 100644 --- a/arch/arm64/Kconfig.debug +++ b/arch/arm64/Kconfig.debug @@ -1,6 +1,3 @@ -menu "Kernel hacking" - -source "lib/Kconfig.debug" config ARM64_PTDUMP_CORE def_bool n @@ -97,5 +94,3 @@ config ARM64_RELOC_TEST tristate "Relocation testing module" source "drivers/hwtracing/coresight/Kconfig" - -endmenu diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig index bf59855628ac..a641b0bf1611 100644 --- a/arch/c6x/Kconfig +++ b/arch/c6x/Kconfig @@ -53,12 +53,8 @@ config C6X_BIG_KERNEL If unsure, say N. -source "init/Kconfig" - # Use the generic interrupt handling code in kernel/irq/ -source "kernel/Kconfig.freezer" - config CMDLINE_BOOL bool "Default bootloader kernel arguments" @@ -114,43 +110,6 @@ config KERNEL_RAM_BASE_ADDRESS default 0xe0000000 if SOC_TMS320C6472 default 0x80000000 -source "mm/Kconfig" - -source "kernel/Kconfig.preempt" - source "kernel/Kconfig.hz" endmenu - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" - -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config ACCESS_CHECK - bool "Check the user pointer address" - default y - help - Usually the pointer transfer from user space is checked to see if its - address is in the kernel space. - - Say N here to disable that check to improve the performance. - -endmenu diff --git a/arch/c6x/Kconfig.debug b/arch/c6x/Kconfig.debug new file mode 100644 index 000000000000..c299e0d8eca3 --- /dev/null +++ b/arch/c6x/Kconfig.debug @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 + +config ACCESS_CHECK + bool "Check the user pointer address" + default y + help + Usually the pointer transfer from user space is checked to see if its + address is in the kernel space. + + Say N here to disable that check to improve the performance. diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 091d6d04b5e5..5e89d40be8cd 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -48,40 +48,4 @@ config NR_CPUS int default 1 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - source "arch/h8300/Kconfig.cpu" - -menu "Kernel Features" - -source "kernel/Kconfig.preempt" - -source "mm/Kconfig" - -endmenu - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -endmenu - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug new file mode 100644 index 000000000000..22a162cd99e8 --- /dev/null +++ b/arch/h8300/Kconfig.debug @@ -0,0 +1 @@ +# dummy file, do not delete diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig index 37adb2003033..89a4b22f34d9 100644 --- a/arch/hexagon/Kconfig +++ b/arch/hexagon/Kconfig @@ -4,6 +4,7 @@ comment "Linux Kernel Configuration for Hexagon" config HEXAGON def_bool y + select ARCH_NO_PREEMPT select HAVE_OPROFILE # Other pending projects/to-do items. # select HAVE_REGS_AND_STACK_ACCESS_API @@ -146,26 +147,6 @@ config PAGE_SIZE_256KB endchoice -source "mm/Kconfig" - source "kernel/Kconfig.hz" endmenu - -source "init/Kconfig" -source "kernel/Kconfig.freezer" -source "drivers/Kconfig" -source "fs/Kconfig" - -menu "Executable File Formats" -source "fs/Kconfig.binfmt" -endmenu - -source "net/Kconfig" -source "security/Kconfig" -source "crypto/Kconfig" -source "lib/Kconfig" - -menu "Kernel hacking" -source "lib/Kconfig.debug" -endmenu diff --git a/arch/hexagon/Kconfig.debug b/arch/hexagon/Kconfig.debug new file mode 100644 index 000000000000..22a162cd99e8 --- /dev/null +++ b/arch/hexagon/Kconfig.debug @@ -0,0 +1 @@ +# dummy file, do not delete diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 02eb68d5d1c0..2bf4ef792f2c 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -4,10 +4,6 @@ config PGTABLE_LEVELS range 3 4 if !IA64_PAGE_SIZE_64KB default 3 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - menu "Processor type and features" config IA64 @@ -369,10 +365,6 @@ config FORCE_CPEI_RETARGET This option it useful to enable this feature on older BIOS's as well. You can also enable this by using boot command line option force_cpei=1. -source "kernel/Kconfig.preempt" - -source "mm/Kconfig" - config ARCH_SELECT_MEMORY_MODEL def_bool y @@ -533,8 +525,6 @@ config CRASH_DUMP source "drivers/firmware/Kconfig" -source "fs/Kconfig.binfmt" - endmenu menu "Power management and ACPI options" @@ -575,10 +565,6 @@ endmenu endif -source "net/Kconfig" - -source "drivers/Kconfig" - source "arch/ia64/hp/sim/Kconfig" config MSPEC @@ -589,13 +575,3 @@ config MSPEC If you have an ia64 and you want to enable memory special operations support (formerly known as fetchop), say Y here, otherwise say N. - -source "fs/Kconfig" - -source "arch/ia64/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug index 677c409425df..1371efc9b005 100644 --- a/arch/ia64/Kconfig.debug +++ b/arch/ia64/Kconfig.debug @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" choice prompt "Physical memory granularity" @@ -56,5 +53,3 @@ config IA64_DEBUG_IRQ Selecting this option turns on bug checking for the IA-64 irq_save and restore instructions. It's useful for tracking down spinlock problems, but slow! If you're unsure, select N. - -endmenu diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index b29f93774d95..070553791e97 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -5,6 +5,7 @@ config M68K select ARCH_HAS_SYNC_DMA_FOR_DEVICE if HAS_DMA select ARCH_MIGHT_HAVE_PC_PARPORT if ISA select ARCH_NO_COHERENT_DMA_MMAP if !MMU + select ARCH_NO_PREEMPT if !COLDFIRE select HAVE_IDE select HAVE_AOUT if MMU select HAVE_DEBUG_BUGVERBOSE @@ -80,10 +81,6 @@ config PGTABLE_LEVELS default 2 if SUN3 || COLDFIRE default 3 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - config MMU bool "MMU-based Paged Memory Management Support" default y @@ -138,18 +135,6 @@ endmenu menu "Kernel Features" -if COLDFIRE -source "kernel/Kconfig.preempt" -endif - -source "mm/Kconfig" - -endmenu - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - endmenu if !MMU @@ -163,18 +148,4 @@ config PM endmenu endif -source "net/Kconfig" - -source "drivers/Kconfig" - source "arch/m68k/Kconfig.devices" - -source "fs/Kconfig" - -source "arch/m68k/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug index 04690b179a6e..f43643111eaf 100644 --- a/arch/m68k/Kconfig.debug +++ b/arch/m68k/Kconfig.debug @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" config BOOTPARAM bool 'Compiled-in Kernel Boot Parameter' @@ -51,5 +48,3 @@ config BDM_DISABLE Disable the ColdFire CPU's BDM signals. endif - -endmenu diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index d14782100088..6163a39ddeb6 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -1,5 +1,6 @@ config MICROBLAZE def_bool y + select ARCH_NO_SWAP select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_NO_COHERENT_DMA_MMAP if !MMU @@ -52,9 +53,6 @@ config CPU_LITTLE_ENDIAN endchoice -config SWAP - def_bool n - config RWSEM_GENERIC_SPINLOCK def_bool y @@ -85,16 +83,10 @@ config STACKTRACE_SUPPORT config LOCKDEP_SUPPORT def_bool y -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - source "arch/microblaze/Kconfig.platform" menu "Processor type and features" -source "kernel/Kconfig.preempt" - source "kernel/Kconfig.hz" config MMU @@ -268,14 +260,6 @@ config MICROBLAZE_64K_PAGES endchoice -source "mm/Kconfig" - -endmenu - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - endmenu menu "Bus Options" @@ -299,17 +283,3 @@ config PCI_XILINX source "drivers/pci/Kconfig" endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/microblaze/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug index 93a737c8d1a6..dc2e3c45e8a2 100644 --- a/arch/microblaze/Kconfig.debug +++ b/arch/microblaze/Kconfig.debug @@ -1,11 +1,5 @@ # For a description of the syntax of this configuration file, # see Documentation/kbuild/kconfig-language.txt. -menu "Kernel hacking" - config TRACE_IRQFLAGS_SUPPORT def_bool y - -source "lib/Kconfig.debug" - -endmenu diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 642a56e2a1ea..2af13b162e5e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2635,8 +2635,6 @@ config HW_PERF_EVENTS Enable hardware performance counter support for perf events. If disabled, perf events will use software events only. -source "mm/Kconfig" - config SMP bool "Multi-Processing support" depends on SYS_SUPPORTS_SMP @@ -2814,8 +2812,6 @@ config HZ config SCHED_HRTICK def_bool HIGH_RES_TIMERS -source "kernel/Kconfig.preempt" - config KEXEC bool "Kexec system call" select KEXEC_CORE @@ -2991,10 +2987,6 @@ config PGTABLE_LEVELS config MIPS_AUTO_PFN_OFFSET bool -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" config HW_HAS_EISA @@ -3127,10 +3119,6 @@ source "drivers/rapidio/Kconfig" endmenu -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - config TRAD_SIGNALS bool @@ -3176,8 +3164,6 @@ config BINFMT_ELF32 default y if MIPS32_O32 || MIPS32_N32 select ELFCORE -endmenu - menu "Power management options" config ARCH_HIBERNATION_POSSIBLE @@ -3205,20 +3191,6 @@ source "drivers/cpuidle/Kconfig" endmenu -source "net/Kconfig" - -source "drivers/Kconfig" - source "drivers/firmware/Kconfig" -source "fs/Kconfig" - -source "arch/mips/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" - source "arch/mips/kvm/Kconfig" diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 0749c3724543..0c86b2a2adfc 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -1,12 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" config TRACE_IRQFLAGS_SUPPORT bool default y -source "lib/Kconfig.debug" - config EARLY_PRINTK bool "Early printk" if EXPERT depends on SYS_HAS_EARLY_PRINTK @@ -155,5 +152,3 @@ config MIPS_CPS_NS16550_SHIFT adjacent ns16550 registers in the system. endif # MIPS_CPS_NS16550_BOOL - -endmenu diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig index 34f7222c5efe..1d4248fa55e9 100644 --- a/arch/nds32/Kconfig +++ b/arch/nds32/Kconfig @@ -71,8 +71,6 @@ config FIX_EARLYCON_MEM config PGTABLE_LEVELS default 2 -source "init/Kconfig" - menu "System Type" source "arch/nds32/Kconfig.cpu" config NR_CPUS @@ -90,24 +88,5 @@ config NDS32_BUILTIN_DTB endmenu menu "Kernel Features" -source "kernel/Kconfig.preempt" -source "kernel/Kconfig.freezer" -source "mm/Kconfig" source "kernel/Kconfig.hz" endmenu - -menu "Executable file formats" -source "fs/Kconfig.binfmt" -endmenu - -source "net/Kconfig" -source "drivers/Kconfig" -source "fs/Kconfig" - -menu "Kernel hacking" -source "lib/Kconfig.debug" -endmenu - -source "security/Kconfig" -source "crypto/Kconfig" -source "lib/Kconfig" diff --git a/arch/nds32/Kconfig.debug b/arch/nds32/Kconfig.debug new file mode 100644 index 000000000000..22a162cd99e8 --- /dev/null +++ b/arch/nds32/Kconfig.debug @@ -0,0 +1 @@ +# dummy file, do not delete diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig index 92035042cf62..f4ad1138e6b9 100644 --- a/arch/nios2/Kconfig +++ b/arch/nios2/Kconfig @@ -3,6 +3,7 @@ config NIOS2 def_bool y select ARCH_HAS_SYNC_DMA_FOR_CPU select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_NO_SWAP select DMA_NONCOHERENT_OPS select TIMER_OF select GENERIC_ATOMIC64 @@ -41,27 +42,16 @@ config HAS_DMA config FPU def_bool n -config SWAP - def_bool n - config RWSEM_GENERIC_SPINLOCK def_bool y config TRACE_IRQFLAGS_SUPPORT def_bool n -source "init/Kconfig" - menu "Kernel features" -source "kernel/Kconfig.preempt" - -source "kernel/Kconfig.freezer" - source "kernel/Kconfig.hz" -source "mm/Kconfig" - config FORCE_MAX_ZONEORDER int "Maximum zone order" range 9 20 @@ -198,23 +188,3 @@ config NIOS2_IO_REGION_BASE default "0xe0000000" endmenu - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/nios2/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/nios2/Kconfig.debug b/arch/nios2/Kconfig.debug index edfeef049a51..7a49f0d28d14 100644 --- a/arch/nios2/Kconfig.debug +++ b/arch/nios2/Kconfig.debug @@ -1,11 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" config TRACE_IRQFLAGS_SUPPORT def_bool y -source "lib/Kconfig.debug" - config DEBUG_STACK_USAGE bool "Enable stack utilization instrumentation" depends on DEBUG_KERNEL @@ -24,5 +21,3 @@ config EARLY_PRINTK This is useful for kernel debugging when your machine crashes very early before the console code is initialized. You should normally say N here, unless you want to debug such a crash. - -endmenu diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index dfb6a79ba7ff..ed5f32d8fbd8 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -69,10 +69,6 @@ config STACKTRACE_SUPPORT config LOCKDEP_SUPPORT def_bool y -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - menu "Processor type and features" choice @@ -144,8 +140,6 @@ config SMP If you don't know what to do here, say N. source kernel/Kconfig.hz -source kernel/Kconfig.preempt -source "mm/Kconfig" config OPENRISC_NO_SPR_SR_DSX bool "use SPR_SR_DSX software emulation" if OR1K_1200 @@ -203,27 +197,3 @@ config OPENRISC_ESR_EXCEPTION_BUG_CHECK endmenu endmenu - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" - -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -endmenu diff --git a/arch/openrisc/Kconfig.debug b/arch/openrisc/Kconfig.debug new file mode 100644 index 000000000000..22a162cd99e8 --- /dev/null +++ b/arch/openrisc/Kconfig.debug @@ -0,0 +1 @@ +# dummy file, do not delete diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index e21751fb24aa..8e6d83f79e72 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -129,10 +129,6 @@ config PGTABLE_LEVELS config SYS_SUPPORTS_HUGETLBFS def_bool y if PA20 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - menu "Processor type and features" @@ -331,9 +327,7 @@ config NODES_SHIFT default "3" depends on NEED_MULTIPLE_NODES -source "kernel/Kconfig.preempt" source "kernel/Kconfig.hz" -source "mm/Kconfig" config COMPAT def_bool y @@ -358,21 +352,6 @@ endmenu source "drivers/parisc/Kconfig" - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/parisc/Kconfig.debug" - config SECCOMP def_bool y prompt "Enable seccomp to safely compute untrusted bytecode" @@ -388,9 +367,3 @@ config SECCOMP defined by each seccomp mode. If unsure, say Y. Only embedded should say N here. - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/parisc/Kconfig.debug b/arch/parisc/Kconfig.debug index fb3507f9b14a..1478ded0e247 100644 --- a/arch/parisc/Kconfig.debug +++ b/arch/parisc/Kconfig.debug @@ -1,9 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" config TRACE_IRQFLAGS_SUPPORT def_bool y - -endmenu diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 9f2b75fe2c2d..1c10ff0406f2 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -383,10 +383,6 @@ config PGTABLE_LEVELS default 3 if PPC_64K_PAGES && !PPC_BOOK3S_64 default 4 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - source "arch/powerpc/sysdev/Kconfig" source "arch/powerpc/platforms/Kconfig" @@ -397,8 +393,6 @@ config HIGHMEM depends on PPC32 source kernel/Kconfig.hz -source kernel/Kconfig.preempt -source "fs/Kconfig.binfmt" config HUGETLB_PAGE_SIZE_VARIABLE bool @@ -641,8 +635,6 @@ config ILLEGAL_POINTER_VALUE default 0x5deadbeef0000000 if PPC64 default 0 -source "mm/Kconfig" - config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG @@ -1201,20 +1193,6 @@ endif config ARCH_RANDOM def_bool n -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "lib/Kconfig" - -source "arch/powerpc/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - config PPC_LIB_RHEAP bool diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index c45424c64e19..fd63cd914a74 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" config PPC_DISABLE_WERROR bool "Don't build arch/powerpc code with -Werror" @@ -379,5 +376,3 @@ config PPC_FAST_ENDIAN_SWITCH depends on DEBUG_KERNEL && PPC_BOOK3S_64 help If you're unsure what this is, say N. - -endmenu diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 4764fdeb4f1f..a344980287a5 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -212,10 +212,6 @@ endmenu menu "Kernel type" -source "mm/Kconfig" - -source "kernel/Kconfig.preempt" - source "kernel/Kconfig.hz" endmenu @@ -242,75 +238,8 @@ source "drivers/pci/Kconfig" endmenu -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - menu "Power management options" source kernel/power/Kconfig endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -menu "Kernel hacking" - -config CMDLINE_BOOL - bool "Built-in kernel command line" - help - For most platforms, it is firmware or second stage bootloader - that by default specifies the kernel command line options. - However, it might be necessary or advantageous to either override - the default kernel command line or add a few extra options to it. - For such cases, this option allows hardcoding command line options - directly into the kernel. - - For that, choose 'Y' here and fill in the extra boot parameters - in CONFIG_CMDLINE. - - The built-in options will be concatenated to the default command - line if CMDLINE_FORCE is set to 'N'. Otherwise, the default - command line will be ignored and replaced by the built-in string. - -config CMDLINE - string "Built-in kernel command string" - depends on CMDLINE_BOOL - default "" - help - Supply command-line options at build time by entering them here. - -config CMDLINE_FORCE - bool "Built-in command line overrides bootloader arguments" - depends on CMDLINE_BOOL - help - Set this option to 'Y' to have the kernel ignore the bootloader - or firmware command line. Instead, the built-in command line - will be used exclusively. - - If you don't know what to do here, say N. - -config EARLY_PRINTK - def_bool y - -source "lib/Kconfig.debug" - -config CMDLINE_BOOL - bool -endmenu - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/riscv/Kconfig.debug b/arch/riscv/Kconfig.debug new file mode 100644 index 000000000000..3224ff6ecf6e --- /dev/null +++ b/arch/riscv/Kconfig.debug @@ -0,0 +1,37 @@ + +config CMDLINE_BOOL + bool "Built-in kernel command line" + help + For most platforms, it is firmware or second stage bootloader + that by default specifies the kernel command line options. + However, it might be necessary or advantageous to either override + the default kernel command line or add a few extra options to it. + For such cases, this option allows hardcoding command line options + directly into the kernel. + + For that, choose 'Y' here and fill in the extra boot parameters + in CONFIG_CMDLINE. + + The built-in options will be concatenated to the default command + line if CMDLINE_FORCE is set to 'N'. Otherwise, the default + command line will be ignored and replaced by the built-in string. + +config CMDLINE + string "Built-in kernel command string" + depends on CMDLINE_BOOL + default "" + help + Supply command-line options at build time by entering them here. + +config CMDLINE_FORCE + bool "Built-in command line overrides bootloader arguments" + depends on CMDLINE_BOOL + help + Set this option to 'Y' to have the kernel ignore the bootloader + or firmware command line. Instead, the built-in command line + will be used exclusively. + + If you don't know what to do here, say N. + +config EARLY_PRINTK + def_bool y diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 515240576930..a6afa60074cb 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -184,10 +184,6 @@ config PGTABLE_LEVELS int default 5 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - source "kernel/livepatch/Kconfig" menu "Processor type and features" @@ -515,8 +511,6 @@ config SCHED_TOPOLOGY making when dealing with machines that have multi-threading, multiple cores or multiple books. -source kernel/Kconfig.preempt - source kernel/Kconfig.hz config KEXEC @@ -627,8 +621,6 @@ config FORCE_MAX_ZONEORDER int default "9" -source "mm/Kconfig" - config MAX_PHYSMEM_BITS int "Maximum size of supported physical memory in bits (42-53)" range 42 53 @@ -798,10 +790,6 @@ config CRASH_DUMP endmenu -menu "Executable file formats / Emulations" - -source "fs/Kconfig.binfmt" - config SECCOMP def_bool y prompt "Enable seccomp to safely compute untrusted bytecode" @@ -819,8 +807,6 @@ config SECCOMP If unsure, say Y. -endmenu - menu "Power Management" config ARCH_HIBERNATION_POSSIBLE @@ -830,30 +816,16 @@ source "kernel/power/Kconfig" endmenu -source "net/Kconfig" - config PCMCIA def_bool n config CCW def_bool y -source "drivers/Kconfig" - config HAVE_PNETID tristate default (SMC || CCWGROUP) -source "fs/Kconfig" - -source "arch/s390/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" - menu "Virtualization" config PFAULT diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug index 2cfdfbf8d320..190527560b2c 100644 --- a/arch/s390/Kconfig.debug +++ b/arch/s390/Kconfig.debug @@ -1,11 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" config TRACE_IRQFLAGS_SUPPORT def_bool y -source "lib/Kconfig.debug" - config S390_PTDUMP bool "Export kernel pagetable layout to userspace via debugfs" depends on DEBUG_KERNEL @@ -20,5 +17,3 @@ config S390_PTDUMP config EARLY_PRINTK def_bool y - -endmenu diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index da4db4b5359f..1fb7b6d72baf 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -170,10 +170,6 @@ config PGTABLE_LEVELS default 3 if X2TLB default 2 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - menu "System type" # @@ -715,8 +711,6 @@ config HOTPLUG_CPU Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. -source "kernel/Kconfig.preempt" - config GUSA def_bool y depends on !SMP && SUPERH32 @@ -884,12 +878,6 @@ source "drivers/pcmcia/Kconfig" endmenu -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - menu "Power management options (EXPERIMENTAL)" source "kernel/power/Kconfig" @@ -897,17 +885,3 @@ source "kernel/power/Kconfig" source "drivers/cpuidle/Kconfig" endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/sh/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index d0767672640d..010b6c33bbba 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -1,11 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" config TRACE_IRQFLAGS_SUPPORT def_bool y -source "lib/Kconfig.debug" - config SH_STANDARD_BIOS bool "Use LinuxSH standard BIOS" depends on SUPERH32 @@ -88,5 +85,3 @@ config MCOUNT def_bool y depends on SUPERH32 depends on STACK_DEBUG || FUNCTION_TRACER - -endmenu diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 50cdd1349015..02ed2df25a54 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -225,8 +225,6 @@ config HUGETLB_PAGE_SIZE_512MB endchoice -source "mm/Kconfig" - config SCHED_MC bool "Multi-core scheduler support" depends on SMP diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 0f535debf802..2d58c26bff9a 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -155,10 +155,6 @@ config PGTABLE_LEVELS config ARCH_SUPPORTS_UPROBES def_bool y if SPARC64 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - menu "Processor type and features" config SMP @@ -331,8 +327,6 @@ config FORCE_MAX_ZONEORDER This config option is actually maximum order plus one. For example, a value of 13 means that the largest free memory block is 2^12 pages. -source "mm/Kconfig" - if SPARC64 source "kernel/power/Kconfig" endif @@ -355,8 +349,6 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. -source "kernel/Kconfig.preempt" - config CMDLINE_BOOL bool "Default bootloader kernel arguments" depends on SPARC64 @@ -556,10 +548,6 @@ config SPARC64_PCI_MSI endmenu -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - config COMPAT bool depends on SPARC64 @@ -574,20 +562,4 @@ config SYSVIPC_COMPAT depends on COMPAT && SYSVIPC default y -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - source "drivers/sbus/char/Kconfig" - -source "fs/Kconfig" - -source "arch/sparc/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug index 4aef29a11925..50a918d496c8 100644 --- a/arch/sparc/Kconfig.debug +++ b/arch/sparc/Kconfig.debug @@ -1,12 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" config TRACE_IRQFLAGS_SUPPORT bool default y -source "lib/Kconfig.debug" - config DEBUG_DCFLUSH bool "D-cache flush debugging" depends on SPARC64 && DEBUG_KERNEL @@ -21,5 +18,3 @@ config FRAME_POINTER bool depends on MCOUNT default y - -endmenu diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig index 20da5a8ca949..6b9938919f0b 100644 --- a/arch/um/Kconfig.um +++ b/arch/um/Kconfig @@ -1,4 +1,70 @@ # SPDX-License-Identifier: GPL-2.0 + +menu "UML-specific options" + +config UML + bool + default y + select ARCH_HAS_KCOV + select ARCH_NO_PREEMPT + select HAVE_ARCH_AUDITSYSCALL + select HAVE_ARCH_SECCOMP_FILTER + select HAVE_UID16 + select HAVE_FUTEX_CMPXCHG if FUTEX + select HAVE_DEBUG_KMEMLEAK + select GENERIC_IRQ_SHOW + select GENERIC_CPU_DEVICES + select GENERIC_CLOCKEVENTS + select HAVE_GCC_PLUGINS + select TTY # Needed for line.c + +config MMU + bool + default y + +config NO_IOMEM + def_bool y + +config ISA + bool + +config SBUS + bool + +config PCI + bool + +config PCMCIA + bool + +config TRACE_IRQFLAGS_SUPPORT + bool + default y + +config LOCKDEP_SUPPORT + bool + default y + +config STACKTRACE_SUPPORT + bool + default y + select STACKTRACE + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config HZ + int + default 100 + +config NR_CPUS + int + range 1 1 + default 1 + +source "arch/$(HEADER_ARCH)/um/Kconfig" + config STATIC_LINK bool "Force a static link" default n @@ -10,8 +76,6 @@ config STATIC_LINK Additionally, this option enables using higher memory spaces (up to 2.75G) for UML. -source "mm/Kconfig" - config LD_SCRIPT_STATIC bool default y @@ -23,8 +87,6 @@ config LD_SCRIPT_DYN depends on !LD_SCRIPT_STATIC select MODULE_REL_CRCS if MODVERSIONS -source "fs/Kconfig.binfmt" - config HOSTFS tristate "Host filesystem" help @@ -122,3 +184,7 @@ config SECCOMP defined by each seccomp mode. If unsure, say Y. + +endmenu + +source "arch/um/drivers/Kconfig" diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char deleted file mode 100644 index f184bde7030e..000000000000 --- a/arch/um/Kconfig.char +++ /dev/null @@ -1,124 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -menu "UML Character Devices" - -config STDERR_CONSOLE - bool "stderr console" - default y - help - console driver which dumps all printk messages to stderr. - -config SSL - bool "Virtual serial line" - help - The User-Mode Linux environment allows you to create virtual serial - lines on the UML that are usually made to show up on the host as - ttys or ptys. - - See <http://user-mode-linux.sourceforge.net/old/input.html> for more - information and command line examples of how to use this facility. - - Unless you have a specific reason for disabling this, say Y. - -config NULL_CHAN - bool "null channel support" - help - This option enables support for attaching UML consoles and serial - lines to a device similar to /dev/null. Data written to it disappears - and there is never any data to be read. - -config PORT_CHAN - bool "port channel support" - help - This option enables support for attaching UML consoles and serial - lines to host portals. They may be accessed with 'telnet <host> - <port number>'. Any number of consoles and serial lines may be - attached to a single portal, although what UML device you get when - you telnet to that portal will be unpredictable. - It is safe to say 'Y' here. - -config PTY_CHAN - bool "pty channel support" - help - This option enables support for attaching UML consoles and serial - lines to host pseudo-terminals. Access to both traditional - pseudo-terminals (/dev/pty*) and pts pseudo-terminals are controlled - with this option. The assignment of UML devices to host devices - will be announced in the kernel message log. - It is safe to say 'Y' here. - -config TTY_CHAN - bool "tty channel support" - help - This option enables support for attaching UML consoles and serial - lines to host terminals. Access to both virtual consoles - (/dev/tty*) and the slave side of pseudo-terminals (/dev/ttyp* and - /dev/pts/*) are controlled by this option. - It is safe to say 'Y' here. - -config XTERM_CHAN - bool "xterm channel support" - help - This option enables support for attaching UML consoles and serial - lines to xterms. Each UML device so assigned will be brought up in - its own xterm. - It is safe to say 'Y' here. - -config NOCONFIG_CHAN - bool - default !(XTERM_CHAN && TTY_CHAN && PTY_CHAN && PORT_CHAN && NULL_CHAN) - -config CON_ZERO_CHAN - string "Default main console channel initialization" - default "fd:0,fd:1" - help - This is the string describing the channel to which the main console - will be attached by default. This value can be overridden from the - command line. The default value is "fd:0,fd:1", which attaches the - main console to stdin and stdout. - It is safe to leave this unchanged. - -config CON_CHAN - string "Default console channel initialization" - default "xterm" - help - This is the string describing the channel to which all consoles - except the main console will be attached by default. This value can - be overridden from the command line. The default value is "xterm", - which brings them up in xterms. - It is safe to leave this unchanged, although you may wish to change - this if you expect the UML that you build to be run in environments - which don't have X or xterm available. - -config SSL_CHAN - string "Default serial line channel initialization" - default "pty" - help - This is the string describing the channel to which the serial lines - will be attached by default. This value can be overridden from the - command line. The default value is "pty", which attaches them to - traditional pseudo-terminals. - It is safe to leave this unchanged, although you may wish to change - this if you expect the UML that you build to be run in environments - which don't have a set of /dev/pty* devices. - -config UML_SOUND - tristate "Sound support" - help - This option enables UML sound support. If enabled, it will pull in - soundcore and the UML hostaudio relay, which acts as a intermediary - between the host's dsp and mixer devices and the UML sound system. - It is safe to say 'Y' here. - -config SOUND - tristate - default UML_SOUND - -config SOUND_OSS_CORE - bool - default UML_SOUND - -config HOSTAUDIO - tristate - default UML_SOUND - -endmenu diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common deleted file mode 100644 index 07f84c842cc3..000000000000 --- a/arch/um/Kconfig.common +++ /dev/null @@ -1,60 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config UML - bool - default y - select ARCH_HAS_KCOV - select HAVE_ARCH_AUDITSYSCALL - select HAVE_ARCH_SECCOMP_FILTER - select HAVE_UID16 - select HAVE_FUTEX_CMPXCHG if FUTEX - select HAVE_DEBUG_KMEMLEAK - select GENERIC_IRQ_SHOW - select GENERIC_CPU_DEVICES - select GENERIC_CLOCKEVENTS - select HAVE_GCC_PLUGINS - select TTY # Needed for line.c - -config MMU - bool - default y - -config NO_IOMEM - def_bool y - -config ISA - bool - -config SBUS - bool - -config PCI - bool - -config PCMCIA - bool - -config TRACE_IRQFLAGS_SUPPORT - bool - default y - -config LOCKDEP_SUPPORT - bool - default y - -config STACKTRACE_SUPPORT - bool - default y - select STACKTRACE - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config HZ - int - default 100 - -config NR_CPUS - int - range 1 1 - default 1 diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug index 967d3109689f..2014597605ea 100644 --- a/arch/um/Kconfig.debug +++ b/arch/um/Kconfig.debug @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" config GPROF bool "Enable gprof support" @@ -37,5 +34,3 @@ config EARLY_PRINTK This is useful for kernel debugging when your machine crashes very early before the console code is initialized. - -endmenu diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest deleted file mode 100644 index 08327b9c0cbe..000000000000 --- a/arch/um/Kconfig.rest +++ /dev/null @@ -1,22 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - -source "arch/um/Kconfig.char" - -source "drivers/Kconfig" - -source "net/Kconfig" - -source "arch/um/Kconfig.net" - -source "fs/Kconfig" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" - -source "arch/um/Kconfig.debug" diff --git a/arch/um/Makefile b/arch/um/Makefile index 306ee51c189f..44ddc3e8fa66 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -113,8 +113,6 @@ define archhelp echo ' find in the kernel root.' endef -KBUILD_KCONFIG := $(HOST_DIR)/um/Kconfig - archheaders: $(Q)$(MAKE) -f $(srctree)/Makefile ARCH=$(HEADER_ARCH) asm-generic archheaders @@ -169,4 +167,4 @@ endef include/generated/user_constants.h: $(HOST_DIR)/um/user-offsets.s $(call filechk,gen-asm-offsets) -export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS DEV_NULL_PATH +export HEADER_ARCH SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS DEV_NULL_PATH diff --git a/arch/um/Kconfig.net b/arch/um/drivers/Kconfig index c390f3deb0dc..2b1aaf7755aa 100644 --- a/arch/um/Kconfig.net +++ b/arch/um/drivers/Kconfig @@ -1,5 +1,129 @@ # SPDX-License-Identifier: GPL-2.0 +menu "UML Character Devices" + +config STDERR_CONSOLE + bool "stderr console" + default y + help + console driver which dumps all printk messages to stderr. + +config SSL + bool "Virtual serial line" + help + The User-Mode Linux environment allows you to create virtual serial + lines on the UML that are usually made to show up on the host as + ttys or ptys. + + See <http://user-mode-linux.sourceforge.net/old/input.html> for more + information and command line examples of how to use this facility. + + Unless you have a specific reason for disabling this, say Y. + +config NULL_CHAN + bool "null channel support" + help + This option enables support for attaching UML consoles and serial + lines to a device similar to /dev/null. Data written to it disappears + and there is never any data to be read. + +config PORT_CHAN + bool "port channel support" + help + This option enables support for attaching UML consoles and serial + lines to host portals. They may be accessed with 'telnet <host> + <port number>'. Any number of consoles and serial lines may be + attached to a single portal, although what UML device you get when + you telnet to that portal will be unpredictable. + It is safe to say 'Y' here. + +config PTY_CHAN + bool "pty channel support" + help + This option enables support for attaching UML consoles and serial + lines to host pseudo-terminals. Access to both traditional + pseudo-terminals (/dev/pty*) and pts pseudo-terminals are controlled + with this option. The assignment of UML devices to host devices + will be announced in the kernel message log. + It is safe to say 'Y' here. + +config TTY_CHAN + bool "tty channel support" + help + This option enables support for attaching UML consoles and serial + lines to host terminals. Access to both virtual consoles + (/dev/tty*) and the slave side of pseudo-terminals (/dev/ttyp* and + /dev/pts/*) are controlled by this option. + It is safe to say 'Y' here. + +config XTERM_CHAN + bool "xterm channel support" + help + This option enables support for attaching UML consoles and serial + lines to xterms. Each UML device so assigned will be brought up in + its own xterm. + It is safe to say 'Y' here. + +config NOCONFIG_CHAN + bool + default !(XTERM_CHAN && TTY_CHAN && PTY_CHAN && PORT_CHAN && NULL_CHAN) + +config CON_ZERO_CHAN + string "Default main console channel initialization" + default "fd:0,fd:1" + help + This is the string describing the channel to which the main console + will be attached by default. This value can be overridden from the + command line. The default value is "fd:0,fd:1", which attaches the + main console to stdin and stdout. + It is safe to leave this unchanged. + +config CON_CHAN + string "Default console channel initialization" + default "xterm" + help + This is the string describing the channel to which all consoles + except the main console will be attached by default. This value can + be overridden from the command line. The default value is "xterm", + which brings them up in xterms. + It is safe to leave this unchanged, although you may wish to change + this if you expect the UML that you build to be run in environments + which don't have X or xterm available. + +config SSL_CHAN + string "Default serial line channel initialization" + default "pty" + help + This is the string describing the channel to which the serial lines + will be attached by default. This value can be overridden from the + command line. The default value is "pty", which attaches them to + traditional pseudo-terminals. + It is safe to leave this unchanged, although you may wish to change + this if you expect the UML that you build to be run in environments + which don't have a set of /dev/pty* devices. + +config UML_SOUND + tristate "Sound support" + help + This option enables UML sound support. If enabled, it will pull in + soundcore and the UML hostaudio relay, which acts as a intermediary + between the host's dsp and mixer devices and the UML sound system. + It is safe to say 'Y' here. + +config SOUND + tristate + default UML_SOUND + +config SOUND_OSS_CORE + bool + default UML_SOUND + +config HOSTAUDIO + tristate + default UML_SOUND + +endmenu + menu "UML Network Devices" depends on NET @@ -211,4 +335,3 @@ config UML_NET_SLIRP Startup example: "eth0=slirp,FE:FD:01:02:03:04,/usr/local/bin/slirp" endmenu - diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index 03f991e44288..60eae744d8fd 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -63,10 +63,6 @@ config ARCH_MAY_HAVE_PC_FDC config ZONE_DMA def_bool y -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - menu "System Type" config MMU @@ -139,12 +135,8 @@ endmenu menu "Kernel Features" -source "kernel/Kconfig.preempt" - source "kernel/Kconfig.hz" -source "mm/Kconfig" - config LEDS def_bool y depends on GPIOLIB @@ -181,12 +173,6 @@ config CMDLINE_FORCE endmenu -menu "Userspace binary formats" - -source "fs/Kconfig.binfmt" - -endmenu - menu "Power management options" source "kernel/power/Kconfig" @@ -201,8 +187,6 @@ config ARCH_HIBERNATION_POSSIBLE endmenu -source "net/Kconfig" - if ARCH_PUV3 config PUV3_GPIO @@ -236,15 +220,3 @@ endmenu endif endif - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/unicore32/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug index de8dae3abc0a..ca0ff97657ef 100644 --- a/arch/unicore32/Kconfig.debug +++ b/arch/unicore32/Kconfig.debug @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" config EARLY_PRINTK def_bool DEBUG_OCD @@ -30,5 +27,3 @@ config DEBUG_OCD help Say Y here if you want the debug print routines to direct their output to the UniCore On-Chip-Debugger channel using CP #1. - -endmenu diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6d36e6b4b13a..b0312f8947ce 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -347,8 +347,6 @@ config PGTABLE_LEVELS default 3 if X86_PAE default 2 -source "init/Kconfig" - config CC_HAS_SANE_STACKPROTECTOR bool default $(success,$(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC)) if 64BIT @@ -357,8 +355,6 @@ config CC_HAS_SANE_STACKPROTECTOR We have to make sure stack protector is unconditionally disabled if the compiler produces broken code. -source "kernel/Kconfig.freezer" - menu "Processor type and features" config ZONE_DMA @@ -1045,8 +1041,6 @@ config SCHED_MC_PRIO If unsure say Y here. -source "kernel/Kconfig.preempt" - config UP_LATE_INIT def_bool y depends on !SMP && X86_LOCAL_APIC @@ -1640,8 +1634,6 @@ config ILLEGAL_POINTER_VALUE default 0 if X86_32 default 0xdead000000000000 if X86_64 -source "mm/Kconfig" - config X86_PMEM_LEGACY_DEVICE bool @@ -2867,9 +2859,7 @@ config X86_SYSFB endmenu -menu "Executable file formats / Emulations" - -source "fs/Kconfig.binfmt" +menu "Binary Emulations" config IA32_EMULATION bool "IA32 Emulation" @@ -2939,20 +2929,6 @@ config X86_DMA_REMAP config HAVE_GENERIC_GUP def_bool y -source "net/Kconfig" - -source "drivers/Kconfig" - source "drivers/firmware/Kconfig" -source "fs/Kconfig" - -source "arch/x86/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - source "arch/x86/kvm/Kconfig" - -source "lib/Kconfig" diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index c6dd1d980081..7d68f0c7cfb1 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -1,11 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" config TRACE_IRQFLAGS_SUPPORT def_bool y -source "lib/Kconfig.debug" - config EARLY_PRINTK_USB bool @@ -410,5 +407,3 @@ endchoice config FRAME_POINTER depends on !UNWINDER_ORC && !UNWINDER_GUESS bool - -endmenu diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig index 9d529f22fd9d..f518b4744ff8 100644 --- a/arch/x86/um/Kconfig +++ b/arch/x86/um/Kconfig @@ -1,13 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -mainmenu "User Mode Linux/$(SUBARCH) $(KERNELVERSION) Kernel Configuration" - -comment "Compiler: $(CC_VERSION_TEXT)" - -source "scripts/Kconfig.include" - -source "arch/um/Kconfig.common" - -menu "UML-specific options" menu "Host processor type and features" @@ -66,9 +57,3 @@ config ARCH_REUSE_HOST_VSYSCALL_AREA config GENERIC_HWEIGHT def_bool y - -source "arch/um/Kconfig.um" - -endmenu - -source "arch/um/Kconfig.rest" diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index d575e8701955..801491e98890 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -60,9 +60,6 @@ config HZ int default 100 -source "init/Kconfig" -source "kernel/Kconfig.freezer" - config LOCKDEP_SUPPORT def_bool y @@ -176,8 +173,6 @@ config XTENSA_UNALIGNED_USER Say Y here to enable unaligned memory access in user space. -source "kernel/Kconfig.preempt" - config HAVE_SMP bool "System Supports SMP (MX)" depends on XTENSA_VARIANT_CUSTOM @@ -491,8 +486,6 @@ config SIMDISK1_FILENAME Another simulated disk in a host file for a buildroot-independent storage. -source "mm/Kconfig" - config FORCE_MAX_ZONEORDER int "Maximum zone order" default "11" @@ -567,30 +560,8 @@ config XTFPGA_LCD_8BIT_ACCESS endmenu -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - -endmenu - menu "Power management options" source "kernel/power/Kconfig" endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/xtensa/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" - - diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug index f64c14adadb3..39de98e20018 100644 --- a/arch/xtensa/Kconfig.debug +++ b/arch/xtensa/Kconfig.debug @@ -1,7 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" config DEBUG_TLB_SANITY bool "Debug TLB sanity" @@ -34,5 +31,3 @@ config S32C1I_SELFTEST It is easy to make wrong hardware configuration, this test should catch it early. Say 'N' on stable hardware. - -endmenu |