diff options
Diffstat (limited to 'arch')
706 files changed, 24691 insertions, 12705 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index b82f21ff5ae8..6801123932a5 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -844,6 +844,14 @@ config REFCOUNT_FULL against various use-after-free conditions that can be used in security flaw exploits. +config HAVE_ARCH_COMPILER_H + bool + help + An architecture can select this if it provides an + asm/compiler.h header that should be included after + linux/compiler-*.h in order to override macro definitions that those + headers generally provide. + config HAVE_ARCH_PREL32_RELOCATIONS bool help diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f69613fd4e68..e8cd55a5b04c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -603,13 +603,16 @@ config ARCH_S3C24XX config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL - select CLKDEV_LOOKUP + select COMMON_CLK select CPU_ARM926T select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select GPIOLIB select HAVE_IDE + select PM_GENERIC_DOMAINS if PM + select PM_GENERIC_DOMAINS_OF if PM && OF + select RESET_CONTROLLER select USE_OF select ZONE_DMA help diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b48dc083d1b1..f6fcb8a79889 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -204,6 +204,14 @@ choice depends on ARCH_BCM_HR2 select DEBUG_UART_8250 + config DEBUG_BCM_IPROC_UART3 + bool "Kernel low-level debugging on BCM IPROC UART3" + depends on ARCH_BCM_CYGNUS + select DEBUG_UART_8250 + help + Say Y here if you want the debug print routines to direct + their output to the third serial port on these devices. + config DEBUG_BCM_KONA_UART bool "Kernel low-level debugging messages via BCM KONA UART" depends on ARCH_BCM_MOBILE @@ -1562,14 +1570,15 @@ config DEBUG_UART_PHYS default 0x18000400 if DEBUG_BCM_HR2 default 0x18010000 if DEBUG_SIRFATLAS7_UART0 default 0x18020000 if DEBUG_SIRFATLAS7_UART1 + default 0x18023000 if DEBUG_BCM_IPROC_UART3 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 default 0x20001000 if DEBUG_HIP01_UART default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 - default 0x3f201000 if DEBUG_BCM2836 default 0x3e000000 if DEBUG_BCM_KONA_UART + default 0x3f201000 if DEBUG_BCM2836 default 0x4000e400 if DEBUG_LL_UART_EFM32 default 0x40028000 if DEBUG_AT91_SAMV7_USART1 default 0x40081000 if DEBUG_LPC18XX_UART0 @@ -1682,6 +1691,7 @@ config DEBUG_UART_VIRT default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 default 0xf1009000 if DEBUG_MT8135_UART3 + default 0xf1023000 if DEBUG_BCM_IPROC_UART3 default 0xf11f1000 if DEBUG_VERSATILE default 0xf1600000 if DEBUG_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 @@ -1797,7 +1807,7 @@ config DEBUG_UART_8250_WORD DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \ DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ - DEBUG_DAVINCI_DA8XX_UART2 || \ + DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 config DEBUG_UART_8250_PALMCHIP diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e7d703d8fac3..ed94cf7e3157 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -219,7 +219,6 @@ machine-$(CONFIG_ARCH_TANGO) += tango machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 -machine-$(CONFIG_ARCH_UNIPHIER) += uniphier machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress machine-$(CONFIG_ARCH_VT8500) += vt8500 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 37a3de760d40..b5bd3de87c33 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-ariettag25.dtb \ at91-cosino_mega2560.dtb \ at91-kizboxmini.dtb \ + at91-wb45n.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ at91sam9g35ek.dtb \ @@ -50,7 +51,10 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ + at91-dvk_som60.dtb \ + at91-gatwick.dtb \ at91-tse850-3.dtb \ + at91-wb50n.dtb \ sama5d31ek.dtb \ sama5d33ek.dtb \ sama5d34ek.dtb \ @@ -73,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b-rev2.dtb \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ + bcm2835-rpi-cm1-io1.dtb \ bcm2836-rpi-2-b.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ @@ -200,6 +205,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ gemini-rut1xx.dtb \ + gemini-sl93512r.dtb \ gemini-sq201.dtb \ gemini-wbd111.dtb \ gemini-wbd222.dtb @@ -345,7 +351,8 @@ dtb-$(CONFIG_SOC_IMX27) += \ imx27-phytec-phycore-rdk.dtb \ imx27-phytec-phycard-s-rdk.dtb dtb-$(CONFIG_SOC_IMX31) += \ - imx31-bug.dtb + imx31-bug.dtb \ + imx31-lite.dtb dtb-$(CONFIG_SOC_IMX35) += \ imx35-eukrea-mbimxsd35-baseboard.dtb \ imx35-pdk.dtb @@ -358,10 +365,14 @@ dtb-$(CONFIG_SOC_IMX51) += \ imx51-digi-connectcore-jsk.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ imx51-ts4800.dtb \ - imx51-zii-rdu1.dtb + imx51-zii-rdu1.dtb \ + imx51-zii-scu2-mezz.dtb \ + imx51-zii-scu3-esb.dtb dtb-$(CONFIG_SOC_IMX53) += \ imx53-ard.dtb \ imx53-cx9020.dtb \ + imx53-kp-ddc.dtb \ + imx53-kp-hsc.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \ imx53-ppd.dtb \ @@ -400,6 +411,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-hummingboard2-emmc-som-v15.dtb \ imx6dl-hummingboard2-som-v15.dtb \ imx6dl-icore.dtb \ + imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ imx6dl-mamoj.dtb \ imx6dl-nit6xlite.dtb \ @@ -521,6 +533,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb +dtb-$(CONFIG_SOC_IMX6SLL) += \ + imx6sll-evk.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ @@ -533,6 +547,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-udoo-neo-full.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ + imx6ul-ccimx6ulsbcexpress.dtb \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ @@ -567,8 +582,10 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-cosmic.dtb \ vf610m4-cosmic.dtb \ vf610-twr.dtb \ + vf610-zii-cfu1.dtb \ vf610-zii-dev-rev-b.dtb \ - vf610-zii-dev-rev-c.dtb + vf610-zii-dev-rev-c.dtb \ + vf610-zii-ssmb-spu3.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ @@ -695,10 +712,12 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ am335x-pocketbeagle.dtb \ + am335x-sancloud-bbe.dtb \ am335x-shc.dtb \ am335x-sbc-t335.dtb \ am335x-sl50.dtb \ - am335x-wega-rdk.dtb + am335x-wega-rdk.dtb \ + am335x-osd3358-sm-red.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-droid4-xt894.dtb \ omap4-duovero-parlor.dtb \ @@ -819,6 +838,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a7793-gose.dtb \ r8a7794-alt.dtb \ r8a7794-silk.dtb \ + r9a06g032-rzn1d400-db.dtb \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rv1108-evb.dtb \ @@ -859,6 +879,8 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \ s3c6410-smdk6410.dtb dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-aquila.dtb \ + s5pv210-fascinate4g.dtb \ + s5pv210-galaxys.dtb \ s5pv210-goni.dtb \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ @@ -1039,7 +1061,7 @@ dtb-$(CONFIG_ARCH_TANGO) += \ tango4-vantage-1172.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-harmony.dtb \ - tegra20-iris-512.dtb \ + tegra20-colibri-iris.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ tegra20-plutux.dtb \ @@ -1109,6 +1131,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc770-xm012.dtb \ zynq-zc770-xm013.dtb \ zynq-zed.dtb \ + zynq-zturn.dtb \ zynq-zybo.dtb \ zynq-zybo-z7.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ @@ -1138,6 +1161,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-388-clearfog-pro.dtb \ armada-388-db.dtb \ armada-388-gp.dtb \ + armada-388-helios4.dtb \ armada-388-rd.dtb dtb-$(CONFIG_MACH_ARMADA_39X) += \ armada-398-db.dtb @@ -1168,7 +1192,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt7623a-rfb-emmc.dtb \ mt7623a-rfb-nand.dtb \ mt7623n-rfb-emmc.dtb \ - mt7623n-rfb-nand.dtb \ mt7623n-bananapi-bpi-r2.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index ed7a5a3daa42..8c6fc4161ad7 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -396,7 +396,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio3>; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 1356fd6f8da3..c87d01297a01 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -778,7 +778,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio3>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 0c096a795e37..bf1a40e45c97 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -690,7 +690,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio0>; - interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */ + interrupts = <31 IRQ_TYPE_EDGE_RISING>; /* gpio 31 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts new file mode 100755 index 000000000000..4d969013f99a --- /dev/null +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -0,0 +1,457 @@ +//SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2018 Octavo Systems LLC - http://www.octavosystems.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-osd335x-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +#include <dt-bindings/display/tda998x.h> + +/ { + model = "Octavo Systems OSD3358-SM-RED"; + compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; + + mcasp0_pins: mcasp0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; + + flash_enable: flash-enable { + pinctrl-single,pins = < + AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */ + >; + }; + + imu_interrupt: imu-interrupt { + pinctrl-single,pins = < + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_rx_er.gpio3_2 */ + >; + }; + + ethernet_interrupt: ethernet-interrupt{ + pinctrl-single,pins = < + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + * AM335x errata for wiring: + * http://www.ti.com/lit/er/sprz360i/sprz360i.pdf + */ + + blue-and-red-wiring = "straight"; + + port { + lcdc_0: endpoint { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988: hdmi-encoder@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ + /* video-ports = <0x234501>; */ + + #sound-dai-cells = <0>; + audio-ports = < TDA998x_I2S 0x03>; + + port { + hdmi_0: endpoint { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + + mpu9250: imu@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ax8975@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + }; + }; + /*invensense,int_config = <0x10>; + invensense,level_shifter = <0>; + invensense,orientation = [01 00 00 00 01 00 00 00 01]; + invensense,sec_slave_type = <0>; + invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/ + }; + + bmp280: pressure@78 { + compatible = "bosch,bmp280"; + reg = <0x76>; + }; +}; + +&rtc { + system-power-controller; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +/ { + clk_mcasp0_fixed: clk-mcasp0-fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk-mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Black"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&tda19988>; + }; + }; + + chosen { + stdout-path = &uart0; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led2 { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led3 { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user-leds-s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c2_pins: pinmux-i2c2-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + uart0_pins: pinmux-uart0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux-clkout2-pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw-default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw-sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci-mdio-default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci-mdio-sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux-mmc1-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ + >; + }; + + emmc_pins: pinmux-emmc-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + interrupts-extended = <&intc 18 &tps 0>; + interrupt-names = "mc", "vbus"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rgmii-txid"; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&rtc { + clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clock-names = "ext-clk", "int-clk"; +}; diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts new file mode 100644 index 000000000000..7b8e7417a11e --- /dev/null +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -0,0 +1,136 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-boneblack-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "SanCloud BeagleBone Enhanced"; + compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + usb_hub_ctrl: usb_hub_ctrl { + pinctrl-single,pins = < + AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLUP | MUX_MODE7) /* rmii1_refclk.gpio0_29 */ + >; + }; + + mpu6050_pins: pinmux_mpu6050_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE7) /* uart0_ctsn.gpio1_8 */ + >; + }; + + lps3331ap_pins: pinmux_lps3331ap_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + >; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; +}; + +&i2c0 { + lps331ap: barometer@5c { + compatible = "st,lps331ap-press"; + st,drdy-int-pin = <1>; + reg = <0x5c>; + interrupt-parent = <&gpio1>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + }; + + mpu6050: accelerometer@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + orientation = <0xff 0 0 0 1 0 0 0 0xff>; + }; + + usb2512b: usb-hub@2c { + compatible = "microchip,usb2512b"; + reg = <0x2c>; + reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + /* wifi on port 4 */ + }; +}; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 1bcc60424ecd..38d57b89f7d3 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -8,6 +8,8 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Toby Churchill SL50 Series"; @@ -34,25 +36,25 @@ pinctrl-0 = <&led_pins>; led0 { - label = "sl50:green:usr0"; + label = "sl50:red:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; default-state = "off"; }; led1 { - label = "sl50:red:usr1"; + label = "sl50:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; }; led2 { - label = "sl50:green:usr2"; + label = "sl50:red:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; default-state = "off"; }; led3 { - label = "sl50:red:usr3"; + label = "sl50:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; default-state = "off"; }; @@ -60,16 +62,44 @@ backlight0: disp0 { compatible = "pwm-backlight"; - pwms = <&ehrpwm1 0 500000 0>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; - default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&backlight0_pins>; + pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_sys_reg>; }; backlight1: disp1 { compatible = "pwm-backlight"; - pwms = <&ehrpwm1 1 500000 0>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; - default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&backlight1_pins>; + pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_sys_reg>; }; clocks { @@ -78,27 +108,85 @@ #size-cells = <0>; /* audio external oscillator */ - tlv320aic3x_mclk: oscillator@0 { + audio_mclk_fixed: oscillator@0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; /* 24.576MHz */ }; + + audio_mclk: audio_mclk_gate@0 { + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&audio_mclk_pins>; + clocks = <&audio_mclk_fixed>; + enable-gpios = <&gpio1 27 0>; + }; + }; + + panel: lcd_panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + tft-alt-mode = <0>; + mono-8bit-mode = <0>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + native-mode = <&timing0>; + timing0: 960x128 { + clock-frequency = <18000000>; + hactive = <960>; + vactive = <272>; + + hback-porch = <40>; + hfront-porch = <16>; + hsync-len = <24>; + hsync-active = <0>; + + vback-porch = <3>; + vfront-porch = <8>; + vsync-len = <4>; + vsync-active = <0>; + }; + }; }; sound { - compatible = "ti,da830-evm-audio"; - ti,model = "AM335x-SL50"; - ti,audio-codec = <&audio_codec>; - ti,mcasp-controller = <&mcasp0>; + compatible = "audio-graph-card"; + label = "sound-card"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_pa_pins>; + + widgets = "Headphone", "Headphone Jack", + "Speaker", "Speaker External", + "Line", "Line In", + "Microphone", "Microphone Jack"; - clocks = <&tlv320aic3x_mclk>; - clock-names = "mclk"; + routing = "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Amplifier", "MONO_LOUT", + "Speaker External", "Amplifier", + "LINE1R", "Line In", + "LINE1L", "Line In", + "MIC3L", "Microphone Jack", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; - ti,audio-routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "LINE1R", "Line In", - "LINE1L", "Line In"; + dais = <&cpu_port>; + + pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; }; emmc_pwrseq: pwrseq@0 { @@ -108,6 +196,14 @@ reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; }; + vdd_sys_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_sys_reg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -120,6 +216,65 @@ pinctrl-names = "default"; pinctrl-0 = <&lwb_pins>; + audio_pins: pinmux_audio_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + >; + }; + + audio_pa_pins: pinmux_audio_pa_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */ + >; + }; + + audio_mclk_pins: pinmux_audio_mclk_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + >; + }; + + backlight0_pins: pinmux_backlight0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ + >; + }; + + backlight1_pins: pinmux_backlight1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* gpmc_ad10.gpio0_26 */ + >; + }; + + lcd_pins: pinmux_lcd_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + led_pins: pinmux_led_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ @@ -207,6 +362,8 @@ /* MDIO */ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + /* Ethernet */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */ >; }; @@ -245,20 +402,16 @@ >; }; - audio_pins: pinmux_audio_pins { + ehrpwm1_pins: pinmux_ehrpwm1a_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */ >; }; - ehrpwm1_pins: pinmux_ehrpwm1a_pins { + rtc0_irq_pins: pinmux_rtc0_irq_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */ + AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad9.gpio0_23 */ >; }; @@ -274,15 +427,18 @@ lwb_pins: pinmux_lwb_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* nKbdOnC - gpmc_ad10.gpio0_26 */ AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */ AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ /* PDI Bus - Battery system */ AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ + /* FPGA */ + AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */ + AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */ >; }; }; @@ -298,9 +454,14 @@ reg = <0x24>; }; - bq32000: rtc@68 { - compatible = "ti,bq32000"; - trickle-resistor-ohms = <1120>; + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + pinctrl-names = "default"; + pinctrl-0 = <&rtc0_irq_pins>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */ + wakeup-source; + trickle-resistor-ohms = <2000>; reg = <0x68>; }; @@ -326,12 +487,21 @@ audio_codec: tlv320aic3106@1b { status = "okay"; compatible = "ti,tlv320aic3106"; + #sound-dai-cells = <0>; reg = <0x1b>; + ai3x-micbias-vg = <2>; /* 2.5V */ AVDD-supply = <&ldo4_reg>; IOVDD-supply = <&ldo4_reg>; DRVDD-supply = <&ldo4_reg>; DVDD-supply = <&ldo3_reg>; + + codec_port: port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + clocks = <&audio_mclk>; + }; + }; }; /* Ambient Light Sensor */ @@ -363,7 +533,7 @@ &usb0 { status = "okay"; - dr_mode = "peripheral"; + dr_mode = "otg"; }; &usb1 { @@ -397,17 +567,27 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&audio_pins>; - + #sound-dai-cells = <0>; op-mode = <0>; /* MCASP_ISS_MODE */ tdm-slots = <2>; - serial-dir = < - 2 0 1 0 - 0 0 0 0 - 0 0 0 0 - 0 0 0 0 + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; + + cpu_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "dsp_b"; + bitclock-master = <&codec_port>; + frame-master = <&codec_port>; + bitclock-inversion; + clocks = <&audio_mclk>; + }; + }; }; &uart0 { @@ -507,13 +687,8 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; - phy-mode = "mii"; -}; - -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; phy-mode = "mii"; + phy-handle = <ðphy0>; }; &mac { @@ -528,6 +703,12 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + reset-delay-us = <100>; /* PHY datasheet states 100us min */ + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &sham { @@ -547,3 +728,15 @@ pinctrl-names = "default"; pinctrl-0 = <&ehrpwm1_pins>; }; + +&lcdc { + status = "okay"; +}; + +&tscadc { + status = "okay"; +}; + +&am335x_adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9cd62bc2ca35..d3dd6a16e70a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -29,8 +29,8 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - d_can0 = &dcan0; - d_can1 = &dcan1; + d-can0 = &dcan0; + d-can1 = &dcan1; usb0 = &usb0; usb1 = &usb1; phy0 = &usb0_phy; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 98aadb0f81c5..1d158cfda15f 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -127,6 +127,7 @@ status = "okay"; pinctrl-names = "default"; enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ + vcc-supply = <&vdd_io_reg>; port { lcd_in: endpoint { @@ -154,6 +155,7 @@ bl: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; + power-supply = <&vdd_io_reg>; pinctrl-0 = <&backlight_pins>; pwms = <&pwm11 0 5000000 0>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; @@ -168,6 +170,13 @@ ti,timers = <&timer11>; #pwm-cells = <3>; }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ + #phy-cells = <0>; + }; }; &davinci_emac { @@ -203,6 +212,7 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; }; }; @@ -220,15 +230,21 @@ cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */ }; -&mmc2 { +&mmc3 { status = "disabled"; }; -&mmc3 { - status = "disabled"; +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; }; &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -287,4 +303,32 @@ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ >; }; + + hsusb1_rst_pins: pinmux_hsusb1_rst_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; + + hsusb1_pins: pinmux_hsusb1_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ + OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ + OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ + OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ + OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ + OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ + OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ + OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ + OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ + OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ + OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ + >; + }; }; diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index a6d5ff73c163..dae6e458e59f 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -14,6 +14,32 @@ cpu0-supply = <&vdd_core_reg>; }; }; + + wl12xx_buffer: wl12xx_buf { + compatible = "regulator-fixed"; + regulator-name = "wl1271_buf"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_buffer_pins>; + gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */ + regulator-always-on; + vin-supply = <&vdd_1v8_reg>; + }; + + wl12xx_vmmc2: wl12xx_vmmc2 { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_wkup_pins>; + gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */ + startup-delay-us = <70000>; + enable-active-high; + regulator-always-on; + vin-supply = <&wl12xx_buffer>; + }; }; &gpmc { @@ -64,7 +90,6 @@ regulators { vdd_core_reg: VDCDC1 { regulator-name = "vdd_core"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -72,7 +97,6 @@ vdd_io_reg: VDCDC2 { regulator-name = "vdd_io"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -80,7 +104,6 @@ vdd_1v8_reg: VDCDC3 { regulator-name = "vdd_1v8"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -88,7 +111,6 @@ vdd_usb18_reg: LDO1 { regulator-name = "vdd_usb18"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -96,7 +118,6 @@ vdd_usb33_reg: LDO2 { regulator-name = "vdd_usb33"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -126,8 +147,63 @@ }; }; +&mmc2 { + interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>; + + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&wl12xx_vmmc2>; + non-removable; + bus-width = <4>; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */ + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + bluetooth { + compatible = "ti,wl1271-st"; + enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */ + max-speed = <3000000>; + }; +}; + &omap3_pmx_core { + wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_clk.mmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_cmd.mmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat0.mmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat1.mmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat2.mmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat3.mmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */ + OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + rtc_pins: pinmux_rtc_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */ @@ -139,4 +215,23 @@ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */ >; }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0) /* uart2_rts */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0) /* gpio_56 */ + >; + }; +}; + +&omap3_pmx_wkup { + + wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + >; + }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 60414b1ca404..5b97c20c5ed4 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -790,7 +790,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 5bb9d68d6e90..d9a2049a1ea8 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -66,10 +66,6 @@ }; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &extcon_usb2 { id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi index c6d858b31011..784639ddf451 100644 --- a/arch/arm/boot/dts/am572x-idk-common.dtsi +++ b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -57,10 +57,6 @@ }; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &extcon_usb2 { id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index ad87f1ae904d..c9063ffca524 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -395,8 +395,13 @@ dr_mode = "host"; }; +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb2 { - dr_mode = "peripheral"; + extcon = <&extcon_usb2>; + dr_mode = "otg"; }; &mmc1 { diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts index 50ed4ae5c621..53b4bd35522a 100644 --- a/arch/arm/boot/dts/armada-388-clearfog-base.dts +++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts index 24e4b5a509be..ff890c09c3ed 100644 --- a/arch/arm/boot/dts/armada-388-clearfog-pro.dts +++ b/arch/arm/boot/dts/armada-388-clearfog-pro.dts @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ #include "armada-388-clearfog.dts" diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 5fd0f6f61e77..89a354b43978 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ /dts-v1/; @@ -235,7 +230,7 @@ &spi1 { /* * Add SPI CS pins for clearfog: - * CS0: W25Q32 (not populated on uSOM) + * CS0: W25Q32 * CS1: * CS2: mikrobus */ diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index 0d9dfdfe977e..7c6ad2afb094 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -3,11 +3,6 @@ * Device Tree include file for SolidRun Clearfog 88F6828 based boards * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ #include "armada-388.dtsi" @@ -230,7 +225,7 @@ &spi1 { /* * Add SPI CS pins for clearfog: - * CS0: W25Q32 (not populated on uSOM) + * CS0: W25Q32 * CS1: PIC microcontroller (Pro models) * CS2: mikrobus */ diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts new file mode 100644 index 000000000000..705adfa8c680 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-helios4.dts @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Helios4 + * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io> + * + */ + +/dts-v1/; +#include "armada-388.dtsi" +#include "armada-38x-solidrun-microsom.dtsi" + +/ { + model = "Helios4"; + compatible = "kobol,helios4", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_12v: regulator-12v { + compatible = "regulator-fixed"; + regulator-name = "power_brick_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_12v>; + }; + + reg_5p0v_hdd: regulator-5v-hdd { + compatible = "regulator-fixed"; + regulator-name = "5V_HDD"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_12v>; + }; + + reg_5p0v_usb: regulator-5v-usb { + compatible = "regulator-fixed"; + regulator-name = "USB-PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&expander0 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_12v>; + }; + + system-leds { + compatible = "gpio-leds"; + status-led { + label = "helios4:green:status"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + fault-led { + label = "helios4:red:fault"; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + + io-leds { + compatible = "gpio-leds"; + sata1-led { + label = "helios4:green:ata1"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata1"; + default-state = "off"; + }; + sata2-led { + label = "helios4:green:ata2"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata2"; + default-state = "off"; + }; + sata3-led { + label = "helios4:green:ata3"; + gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata3"; + default-state = "off"; + }; + sata4-led { + label = "helios4:green:ata4"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata4"; + default-state = "off"; + }; + usb-led { + label = "helios4:green:usb"; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usb-host"; + default-state = "off"; + }; + }; + + fan1: j10-pwm { + compatible = "pwm-fan"; + pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */ + }; + + fan2: j17-pwm { + compatible = "pwm-fan"; + pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */ + }; + + usb2_phy: usb2-phy { + compatible = "usb-nop-xceiv"; + vbus-regulator = <®_5p0v_usb>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + }; + + soc { + internal-regs { + i2c@11000 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* + * PCA9655 GPIO expander, up to 1MHz clock. + * 0-Board Revision bit 0 # + * 1-Board Revision bit 1 # + * 5-USB3 overcurrent + * 6-USB3 power + */ + expander0: gpio-expander@20 { + /* + * This is how it should be: + * compatible = "onnn,pca9655", + * "nxp,pca9555"; + * but you can't do this because of + * the way I2C works. + */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pca0_pins>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + board_rev_bit_0 { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "board-rev-0"; + }; + board_rev_bit_1 { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + input; + line-name = "board-rev-1"; + }; + usb3_ilimit { + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + input; + line-name = "usb-overcurrent-status"; + }; + }; + + temp_sensor: temp@4c { + compatible = "ti,lm75"; + reg = <0x4c>; + vcc-supply = <®_3p3v>; + }; + }; + + i2c@11100 { + /* + * External I2C Bus for user peripheral + */ + clock-frequency = <400000>; + pinctrl-0 = <&helios_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + sata@a8000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + }; + + sata1: sata-port@1 { + reg = <1>; + }; + }; + + sata@e0000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata2: sata-port@0 { + reg = <0>; + }; + + sata3: sata-port@1 { + reg = <1>; + }; + }; + + spi@10680 { + pinctrl-0 = <&spi1_pins + µsom_spi1_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + sdhci@d8000 { + bus-width = <4>; + cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-0 = <&helios_sdhci_pins + &helios_sdhci_cd_pins>; + pinctrl-names = "default"; + status = "okay"; + vmmc = <®_3p3v>; + wp-inverted; + }; + + usb@58000 { + usb-phy = <&usb2_phy>; + status = "okay"; + }; + + usb3@f0000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + }; + + pinctrl@18000 { + pca0_pins: pca0-pins { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + microsom_phy0_int_pins: microsom-phy0-int-pins { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + helios_i2c1_pins: i2c1-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c1"; + }; + helios_sdhci_cd_pins: helios-sdhci-cd-pins { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + helios_sdhci_pins: helios-sdhci-pins { + marvell,pins = "mpp21", "mpp28", + "mpp37", "mpp38", + "mpp39", "mpp40"; + marvell,function = "sd0"; + }; + helios_led_pins: helios-led-pins { + marvell,pins = "mpp24", "mpp25", + "mpp49", "mpp50", + "mpp52", "mpp53", + "mpp54"; + marvell,function = "gpio"; + }; + helios_fan_pins: helios-fan-pins { + marvell,pins = "mpp41", "mpp43", + "mpp48", "mpp55"; + marvell,function = "gpio"; + }; + microsom_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp59"; + marvell,function = "spi1"; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 2d1cea131e71..3a7f9c1ac346 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Armada 38x Microsom * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -99,7 +94,6 @@ compatible = "w25q32", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <3000000>; - status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index ede11c597673..2375449c02d0 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -80,20 +80,20 @@ }; }; -&ehci0 { +/* + * Enable port A as device (via the virtual hub) and port B as + * host by default on the eval board. This can be easily changed + * by replacing the override below with &ehci0 { ... } to enable + * host on both ports. + */ +&vhub { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2ah_default>; }; &ehci1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2bh_default>; }; &uhci { status = "okay"; - - /* No pinctrl, this follows the above EHCI settings */ }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 0b9b37d4d6ef..7d28c03a9e0b 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -21,9 +21,9 @@ #size-cells = <1>; ranges; - vga_memory: framebuffer@bf000000 { + vga_memory: framebuffer@9f000000 { no-map; - reg = <0xbf000000 0x01000000>; /* 16M */ + reg = <0x9f000000 0x01000000>; /* 16M */ }; flash_memory: region@98000000 { diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 75df1573380e..b23a983f95a5 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -92,6 +92,12 @@ reg = <0x1e6c0080 0x80>; }; + cvic: copro-interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2400-cvic", "aspeed-cvic"; + valid-sources = <0x7fffffff>; + reg = <0x1e6c2000 0x80>; + }; + mac0: ethernet@1e660000 { compatible = "aspeed,ast2400-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; @@ -113,6 +119,8 @@ reg = <0x1e6a1000 0x100>; interrupts = <5>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2h_default>; status = "disabled"; }; @@ -123,6 +131,20 @@ #ports = <3>; clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; status = "disabled"; + /* + * No default pinmux, it will follow EHCI, use an explicit pinmux + * override if you don't enable EHCI + */ + }; + + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2400-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2d_default>; + status = "disabled"; }; apb { @@ -161,7 +183,7 @@ status = "disabled"; }; - sram@1e720000 { + sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x8000>; // 32K }; @@ -224,7 +246,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x1e786000 0x1000>; - clocks = <&syscon ASPEED_CLK_APB>; + clocks = <&syscon ASPEED_CLK_24M>; resets = <&syscon ASPEED_RESET_PWM>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 17f2714d18a7..87fdc146ff52 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -127,6 +127,13 @@ reg = <0x1e6c0080 0x80>; }; + cvic: copro-interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2500-cvic", "aspeed-cvic"; + valid-sources = <0xffffffff>; + copro-sw-interrupts = <1>; + reg = <0x1e6c2000 0x80>; + }; + mac0: ethernet@1e660000 { compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; @@ -148,6 +155,8 @@ reg = <0x1e6a1000 0x100>; interrupts = <5>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ah_default>; status = "disabled"; }; @@ -156,6 +165,8 @@ reg = <0x1e6a3000 0x100>; interrupts = <13>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bh_default>; status = "disabled"; }; @@ -166,6 +177,20 @@ #ports = <2>; clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; status = "disabled"; + /* + * No default pinmux, it will follow EHCI, use an explicit pinmux + * override if you don't enable EHCI + */ + }; + + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + status = "disabled"; }; apb { @@ -211,7 +236,7 @@ status = "disabled"; }; - sram@1e720000 { + sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x9000>; // 36K }; @@ -281,7 +306,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x1e786000 0x1000>; - clocks = <&syscon ASPEED_CLK_APB>; + clocks = <&syscon ASPEED_CLK_24M>; resets = <&syscon ASPEED_RESET_PWM>; status = "disabled"; }; @@ -1417,6 +1442,11 @@ groups = "USB2AH"; }; + pinctrl_usb2ad_default: usb2ad_default { + function = "USB2AD"; + groups = "USB2AD"; + }; + pinctrl_usb11bhid_default: usb11bhid_default { function = "USB11BHID"; groups = "USB11BHID"; diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/at91-dvk_som60.dts new file mode 100644 index 000000000000..ededd5b0d27b --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_som60.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ +/dts-v1/; +#include "at91-som60.dtsi" +#include "at91-dvk_su60_somc.dtsi" +#include "at91-dvk_su60_somc_lcm.dtsi" + +/ { + model = "Laird DVK SOM60"; + compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = &dbgu; + tick-timer = &pit; + }; +}; + +&mmc0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&ssc0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&pit { + status = "okay"; +}; + +&adc0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&macb0 { + status = "okay"; +}; + +&macb1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi new file mode 100644 index 000000000000..bb86f17ed5ed --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ + +/ { + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck2_as_audio_mck>; + + atmel,model = "wm8904 @ DVK-SOM60"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + + status = "okay"; + }; +}; + +&mmc0 { + status = "okay"; + + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + slot@0 { + bus-width = <4>; + cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; + cd-inverted; + }; +}; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */ + spi-flash@0 { + compatible = "mxicy,mx25u4035", "jedec,spi-nor"; + spi-max-frequency = <33000000>; + reg = <0>; + }; +}; + +&ssc0 { + atmel,clk-from-rk-pin; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + wm8904: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck2>; + clock-names = "mclk"; + }; +}; + +&i2c1 { + status = "okay"; + + eeprom@87 { + compatible = "giantec,gt24c32a", "atmel,24c32"; + reg = <87>; + pagesize = <32>; + }; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&pit { + status = "okay"; +}; + +&adc0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&macb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@7 { + reg = <7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_geth_int>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; +}; + +&macb1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@1 { + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth_int>; + interrupt-parent = <&pioC>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi new file mode 100644 index 000000000000..4b9176dc5d02 --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + panel: panel { + compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel"; + backlight = <&backlight>; + power-supply = <&vcc_lcd_reg>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + vcc_lcd_reg: fixedregulator_lcd { + compatible = "regulator-fixed"; + regulator-name = "VCC LCM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + status = "okay"; + }; +}; + +&pinctrl { + board { + pinctrl_lcd_ctp_int: lcd_ctp_int { + atmel,pins = + <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + ft5426@56 { + compatible = "focaltech,ft5426", "edt,edt-ft5406"; + reg = <56>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_ctp_int>; + + interrupt-parent = <&pioC>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&hlcdc { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts new file mode 100644 index 000000000000..5a81cab5fc3a --- /dev/null +++ b/arch/arm/boot/dts/at91-gatwick.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-gatwick.dts - Device Tree file for the Gatwick board + * + * Copyright (C) 2018 Laird + * + */ +/dts-v1/; +#include "at91-wb50n.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Laird Workgroup Bridge 50N - Project Gatwick"; + compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + gpio_keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + reset-button { + label = "Reset Button"; + linux,code = <KEY_SETUP>; + gpios = <&pioE 31 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + ethernet { + label = "gatwick:yellow:ethernet"; + gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wifi { + label = "gatwick:green:wifi"; + gpios = <&pioA 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + ble { + label = "gatwick:blue:ble"; + gpios = <&pioA 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lora { + label = "gatwick:orange:lora"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blank { + label = "gatwick:green:blank"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + user { + label = "gatwick:yellow:user"; + gpios = <&pioA 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&pinctrl { + board { + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */ + }; + }; +}; + +&mmc0 { + status = "okay"; +}; + +&macb1 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +/* FTDI USART */ +&usart0 { + status = "okay"; +}; + +/* GPS USART */ +&usart1 { + pinctrl-0 = <&pinctrl_usart1>; + status = "okay"; +}; + +&spi1 { + status = "okay"; + + spidev@0 { + compatible = "semtech,sx1301"; + reg = <0>; + spi-max-frequency = <8000000>; + }; +}; + +&usb1 { + status = "okay"; + /delete-property/atmel,oc-gpio; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi new file mode 100644 index 000000000000..241682a207c5 --- /dev/null +++ b/arch/arm/boot/dts/at91-som60.dtsi @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-som60.dtsi - Device Tree file for the SOM60 module + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ +#include "sama5d36.dtsi" + +/ { + model = "Laird SOM60"; + compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; +}; + +&pinctrl { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_en: mmc0_en { + atmel,pins = + <AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_nand0_wp: nand0_wp { + atmel,pins = + <AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_usb_vbus: usb_vbus { + atmel,pins = + <AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + /* Conflicts with USART2_SCK */ + }; + + pinctrl_usart2_sck: usart2_sck { + atmel,pins = + <AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + /* Conflicts with USB_VBUS */ + }; + + pinctrl_usb_oc: usb_oc { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + /* Conflicts with USART3_SCK */ + }; + + pinctrl_usart3_sck: usart3_sck { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + /* Conflicts with USB_OC */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_geth_int: geth_int { + atmel,pins = + <AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + /* Conflicts with USART1_SCK */ + }; + + pinctrl_usart1_sck: usart1_sck { + atmel,pins = + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + /* Conflicts with GETH_INT */ + }; + + pinctrl_eth_int: eth_int { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; +}; + +&mmc0 { + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc1 { + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&spi0 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; +}; + +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>; +}; + +&usart1 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; +}; + +&usart2 { + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>; +}; + +&usart3 { + pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>; +}; + +&adc0 { + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + >; +}; + +&macb0 { + phy-mode = "rgmii"; +}; + +&macb1 { + phy-mode = "rmii"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand: nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ubootspl@0 { + label = "u-boot-spl"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x20000>; + }; + + ubi@e0000 { + label = "ubi"; + reg = <0xe0000 0xfe00000>; + }; + }; + }; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>; + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 20 GPIO_ACTIVE_HIGH + 0>; + atmel,oc-gpio = <0 + &pioE 15 GPIO_ACTIVE_LOW + 0>; +}; diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts new file mode 100644 index 000000000000..5b9512a6c89c --- /dev/null +++ b/arch/arm/boot/dts/at91-wb45n.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb45n.dts - Device Tree file for WB45NBT board + * + * Copyright (C) 2018 Laird + * + */ +/dts-v1/; +#include "at91-wb45n.dtsi" + +/ { + model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)"; + compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9"; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + irqbtn@18 { + reg = <18>; + label = "IRQBTN"; + linux,code = <99>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; + gpio-key,wakeup = <1>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&mmc0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&macb0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&usart0 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi new file mode 100644 index 000000000000..ebe61a25ca96 --- /dev/null +++ b/arch/arm/boot/dts/at91-wb45n.dtsi @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb45n.dtsi - Device Tree file for WB45NBT board + * + * Copyright (C) 2018 Laird + * + */ + +#include "at91sam9g25.dtsi" + +/ { + model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)"; + compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + atheros { + compatible = "atheros,ath6kl"; + atheros,board-id = "SD32"; + }; +}; + +&reset_controller { + compatible = "atmel,sama5d3-rstc"; +}; + +&shutdown_controller { + atmel,wakeup-mode = "low"; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&ebi { + status = "okay"; + nand_controller: nand-controller { + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>; + pinctrl-names = "default"; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bs"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "redund-env"; + reg = <0xc0000 0x20000>; + }; + + kernel-a@e0000 { + label = "kernel-a"; + reg = <0xe0000 0x280000>; + }; + + kernel-b@360000 { + label = "kernel-b"; + reg = <0x360000 0x280000>; + }; + + rootfs-a@5e0000 { + label = "rootfs-a"; + reg = <0x5e0000 0x2600000>; + }; + + rootfs-b@2be0000 { + label = "rootfs-b"; + reg = <0x2be0000 0x2600000>; + }; + + user@51e0000 { + label = "user"; + reg = <0x51e0000 0x2dc0000>; + }; + + logs@7fa0000 { + label = "logs"; + reg = <0x7fa0000 0x60000>; + }; + + }; + }; + }; +}; + +&usb0 { + num-ports = <2>; + atmel,vbus-gpio = < + &pioB 12 GPIO_ACTIVE_HIGH + &pioA 31 GPIO_ACTIVE_HIGH + >; + atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; +}; + +&macb0 { + phy-mode = "rmii"; +}; + +&spi0 { + cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>; +}; + +&usb2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_usb2>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; +}; + +&mmc0 { + pinctrl-0 = < + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&pinctrl { + usb2 { + pinctrl_board_usb2: usb2-board { + atmel,pins = + <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB11 gpio vbus sense, deglitch */ + }; + }; +}; + diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts new file mode 100644 index 000000000000..8cecc7051a86 --- /dev/null +++ b/arch/arm/boot/dts/at91-wb50n.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb50n.dts - Device Tree file for wb50n evaluation board + * + * Copyright (C) 2018 Laird + * + */ + +/dts-v1/; +#include "at91-wb50n.dtsi" + +/ { + model = "Laird Workgroup Bridge 50N - Atmel SAMA5D"; + compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + btn0@10 { + reg = <10>; + label = "BTNESC"; + linux,code = <1>; /* ESC button */ + gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + gpio-key,wakeup = <1>; + }; + + irqbtn@31 { + reg = <31>; + label = "IRQBTN"; + linux,code = <99>; /* SysReq button */ + gpios = <&pioE 31 GPIO_ACTIVE_LOW>; + gpio-key,wakeup = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "wb50n:blue:led0"; + gpios = <&pioA 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led1 { + label = "wb50n:green:led1"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + label = "wb50n:red:led2"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + +&mmc0 { + status = "okay"; +}; + +&macb1 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +/* On BB40 this port is labeled UART1 */ +&usart0 { + status = "okay"; +}; + +/* On BB40 this port is labeled UART0 */ +&usart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; + + spidev@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <8000000>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi new file mode 100644 index 000000000000..85692c8ef2b1 --- /dev/null +++ b/arch/arm/boot/dts/at91-wb50n.dtsi @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module + * + * Copyright (C) 2018 Laird + * + */ + +#include "sama5d31.dtsi" + +/ { + model = "Laird Workgroup Bridge 50N - Atmel SAMA5D"; + compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; +}; + +&pinctrl { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */ + }; + }; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&slow_osc { + atmel,osc-bypass; +}; + +&usart1_clk { + atmel,clk-output-range = <0 132000000>; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + status = "okay"; + atheros@0 { + compatible = "atheros,ath6kl"; + atheros,board-id = "SD32"; + reg = <0>; + bus-width = <4>; + }; +}; + +&macb1 { + phy-mode = "rmii"; +}; + +&dbgu { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ +}; + +/* On BB40 this port is labeled UART1 */ +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>; +}; + +/* On BB40 this port is labeled UART0 */ +&usart1 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>; + dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>; + dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>; + rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>; +}; + +/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */ +&usart3 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>; + status = "okay"; +}; + +&spi1 { + cs-gpios = <&pioC 25 0>, <0>, <0>, <0>; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand: nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bs"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x20000>; + }; + + kernel-a@e0000 { + label = "kernel-a"; + reg = <0xe0000 0x500000>; + }; + + kernel-b@5e0000 { + label = "kernel-b"; + reg = <0x5e0000 0x500000>; + }; + + rootfs-a@ae0000 { + label = "rootfs-a"; + reg = <0xae0000 0x3000000>; + }; + + rootfs-b@3ae0000 { + label = "rootfs-b"; + reg = <0x3ae0000 0x3000000>; + }; + + user@6ae0000 { + label = "user"; + reg = <0x6ae0000 0x14e0000>; + }; + }; + }; +}; + +&usb0 { + atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; +}; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>; + atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 53c63d0a418a..33f09d5ea020 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -590,7 +590,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc", "syscon"; + compatible = "atmel,at91sam9261-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 87fb0660ab5d..af68a86c9973 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -93,7 +93,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc", "syscon"; + compatible = "atmel,at91sam9263-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index bd001cca25a4..8fb22030f00b 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -832,7 +832,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9g45-pmc", "syscon"; + compatible = "atmel,at91sam9rl-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index a3c3c3128148..11c0ef102ab1 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -389,13 +389,13 @@ }; }; - rstc@fffffe00 { + reset_controller: rstc@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; }; - shdwc@fffffe10 { + shutdown_controller: shdwc@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; clocks = <&clk32k>; @@ -470,7 +470,7 @@ clock-names = "dma_clk"; }; - pinctrl@fffff400 { + pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; @@ -1206,7 +1206,7 @@ }; }; - watchdog@fffffe40 { + watchdog: watchdog@fffffe40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 2c4df2d2d4a6..253df7170a4e 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -41,6 +41,10 @@ model = "Broadcom Cygnus SoC"; interrupt-parent = <&gic>; + aliases { + ethernet0 = ð0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -417,6 +421,11 @@ status = "disabled"; }; + rng: rng@18032000 { + compatible = "brcm,iproc-rng200"; + reg = <0x18032000 0x28>; + }; + sdhci0: sdhci@18041000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x18041000 0x100>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts new file mode 100644 index 000000000000..4764a25585ab --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835-rpi-cm1.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,compute-module", "brcm,bcm2835"; + model = "Raspberry Pi Compute Module IO board rev1"; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "GPIO0", + "GPIO1", + "GPIO2", + "GPIO3", + "GPIO4", + "GPIO5", + "GPIO6", + "GPIO7", + "GPIO8", + "GPIO9", + "GPIO10", + "GPIO11", + "GPIO12", + "GPIO13", + "GPIO14", + "GPIO15", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "GPIO32", + "GPIO33", + "GPIO34", + "GPIO35", + "GPIO36", + "GPIO37", + "GPIO38", + "GPIO39", + "GPIO40", + "GPIO41", + "GPIO42", + "GPIO43", + "GPIO44", + "GPIO45", + "HDMI_HPD_N", + /* Also used as ACT LED */ + "EMMC_EN_N", + /* Used by eMMC */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi new file mode 100644 index 000000000000..ef22c2da783a --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + leds { + act { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + }; + + reg_3v3: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&sdhost { + non-removable; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_1v8>; +}; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index 7704bb029605..beb6c502dadc 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -17,6 +17,12 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupt-parent = <&local_intc>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + }; + timer { compatible = "arm,armv7-timer"; interrupt-parent = <&local_intc>; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 61315cf734ef..31b29646b14c 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -66,6 +66,12 @@ clock-frequency = <1000000>; }; + txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; + interrupts = <1 11>; + }; + dma: dma@7e007000 { compatible = "brcm,bcm2835-dma"; reg = <0x7e007000 0xf00>; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index ff2e551b9058..79d454ff3be4 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -90,3 +90,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 3bcc03788f38..99365bb8c41e 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -80,3 +80,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index a587384f8e40..bc330b1f6de0 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -146,3 +146,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts index 6c8f0ad82332..258d2b251900 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -38,3 +38,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index ebda45fe9ea4..e7fdaed99bd0 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -57,3 +57,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 9dd0e22c906a..42bafc644013 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -64,3 +64,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index d7c34fa72b4b..dce35eb79dbe 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -91,3 +91,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 2642494c97a1..b7a024b7951b 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -83,3 +83,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index e7b09b7b7d25..f7f834cd3448 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -158,3 +158,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 16314fcc6e56..76a2bab3bc6f 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -74,3 +74,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 328aa90240ce..69e3570e03dd 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -118,3 +118,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 8ea46eed26e2..0f6f0fe13bfb 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -104,3 +104,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index 5eeac7302329..f77089744996 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -57,3 +57,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index da4d9ec62fc6..4d427863756f 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -105,3 +105,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index c94c732188fb..5f663f848db1 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -99,3 +99,7 @@ &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 22271818f901..2033411240c7 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -62,3 +62,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 79a9633ec417..77d1687b4228 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -127,3 +127,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index db744a5e122d..983149b55269 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -39,3 +39,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 9e267d38df4c..ca41481b44bd 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -101,3 +101,7 @@ &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index d266131652ad..aa69e656d395 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -182,3 +182,7 @@ &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index f5bf6586ae07..c7143a9daa1a 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -104,3 +104,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index d173bcd93b91..03c1ab188576 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -115,3 +115,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index f47afe36d857..36efe410dcd7 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -31,5 +31,238 @@ linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "bcm53xx:green:usb2"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + power { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + }; + + wifi-disabled { + label = "bcm53xx:amber:wifi-disabled"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + wifi-enabled { + label = "bcm53xx:white:wifi-enabled"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + bluebar1 { + label = "bcm53xx:white:bluebar1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + + bluebar2 { + label = "bcm53xx:white:bluebar2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + + bluebar3 { + label = "bcm53xx:white:bluebar3"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + + bluebar4 { + label = "bcm53xx:white:bluebar4"; + gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; + + bluebar5 { + label = "bcm53xx:white:bluebar5"; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + }; + + bluebar6 { + label = "bcm53xx:white:bluebar6"; + gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + }; + + bluebar7 { + label = "bcm53xx:white:bluebar7"; + gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; + }; + + bluebar8 { + label = "bcm53xx:white:bluebar8"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + }; + + mdio-bus-mux { + /* BIT(9) = 1 => external mdio */ + mdio_ext: mdio@200 { + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio-mii-mux { + compatible = "mdio-mux-mmioreg"; + mdio-parent-bus = <&mdio_ext>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1800c1c0 0x4>; + + /* BIT(6) = mdc, BIT(7) = mdio */ + mux-mask = <0xc0>; + + mdio-mii@0 { + /* Enable MII function */ + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "brcm,bcm53125"; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + reset-names = "robo_reset"; + reg = <0>; + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan5"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan6"; + }; + + port@4 { + reg = <4>; + label = "lan3"; + }; + + sw1_p8: port@8 { + reg = <8>; + ethernet = <&sw0_p0>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan7"; + }; + + port@2 { + reg = <2>; + label = "lan4"; + }; + + port@3 { + reg = <3>; + label = "lan8"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + ethernet = <&gmac2>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + sw0_p0: port@0 { + reg = <0>; + label = "extsw"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index a5cef51cfe4f..3e5e9972cd97 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -60,3 +60,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index 7496aabf8f77..7acbecd42950 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -60,3 +60,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 53aaa5212610..f4558d9d2769 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -100,3 +100,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 0e718edc065a..30719380b6c0 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -91,3 +91,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index 4840a782fc05..f7c3e274b354 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -7,9 +7,10 @@ #include "bcm4708.dtsi" / { - usb3_phy: usb3-phy { - compatible = "brcm,ns-bx-usb3-phy"; - }; +}; + +&usb3_phy { + compatible = "brcm,ns-bx-usb3-phy"; }; &uart0 { diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index ef995e50ee12..bc607d11eef8 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -154,13 +154,6 @@ clock-names = "phy-ref-clk"; }; - usb3_phy: usb3-phy { - compatible = "brcm,ns-ax-usb3-phy"; - reg = <0x18105000 0x1000>, <0x18003000 0x1000>; - reg-names = "dmp", "ccb-mii"; - #phy-cells = <0>; - }; - axi@18000000 { compatible = "brcm,bus-axi"; reg = <0x18000000 0x1000>; @@ -359,7 +352,33 @@ reg = <0x18003000 0x8>; #size-cells = <1>; #address-cells = <0>; - status = "disabled"; + }; + + mdio-bus-mux { + compatible = "mdio-mux-mmioreg"; + mdio-parent-bus = <&mdio>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x18003000 0x4>; + mux-mask = <0x200>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + usb3_dmp: syscon@18105000 { + reg = <0x18105000 0x1000>; }; i2c0: i2c@18009000 { diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 16007d72c346..453a2a37dabd 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -48,6 +48,14 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 2e08c895f281..934f07adfe3c 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -42,3 +42,7 @@ reg = <0x00000000 0x08000000>; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index c37616c67edc..31e4dd098776 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -42,3 +42,7 @@ reg = <0x00000000 0x08000000>; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 40e694bfe5ca..17f63c7a0437 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -90,3 +90,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts index 3076e81699cf..11b0f5ed99e6 100644 --- a/arch/arm/boot/dts/bcm953012hr.dts +++ b/arch/arm/boot/dts/bcm953012hr.dts @@ -95,3 +95,7 @@ reg = <0x00700000 0x00900000>; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index 79c168e2714b..e798055d6989 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -113,3 +113,7 @@ &uart1 { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index db67377af266..d2f7d984bba5 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -50,6 +50,16 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <1>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 516a7ce25791..99d6872a6dfc 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -45,6 +45,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <1>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu2: cpu@2 { @@ -52,6 +63,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <2>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu3: cpu@3 { @@ -59,6 +81,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <3>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; }; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts index 14dff3e188ed..0102ffc5aa53 100644 --- a/arch/arm/boot/dts/da850-enbw-cmc.dts +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -35,6 +35,10 @@ }; }; +&ref_clk { + clock-frequency = <24000000>; +}; + &edma0 { ti,edma-reserved-slot-ranges = <32 50>; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 0e82bb988fde..f9b757905845 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -27,6 +27,65 @@ spi0 = &spi1; }; + backlight: backlight-pwm { + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>; + power-supply = <&backlight_lcd>; + compatible = "pwm-backlight"; + /* + * The PWM here corresponds to production hardware. The + * schematic needs to be 1015171 (15 March 2010), Rev A + * or newer. + */ + pwms = <&ecap2 0 50000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; + default-brightness-level = <7>; + }; + + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + /* + * The vpif and the LCD are mutually exclusive. + * To enable VPIF, change the status below to 'disabled' then + * then change the status of the vpif below to 'okay' + */ + status = "okay"; + enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */ + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + native-mode = <&timing0>; + timing0: 480x272 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <4>; + vsync-len = <11>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -35,6 +94,15 @@ regulator-boot-on; }; + backlight_lcd: backlight-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_backlight_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */ + enable-active-high; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "DA850/OMAP-L138 EVM"; @@ -63,6 +131,14 @@ }; }; +&ecap2 { + status = "okay"; +}; + +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -93,6 +169,10 @@ }; }; +&sata { + status = "okay"; +}; + &serial0 { status = "okay"; }; @@ -109,6 +189,10 @@ status = "okay"; }; +&lcdc { + status = "okay"; +}; + &i2c0 { status = "okay"; clock-frequency = <100000>; @@ -336,5 +420,10 @@ &vpif { pinctrl-names = "default"; pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>; - status = "okay"; + /* + * The vpif and the LCD are mutually exclusive. + * To enable VPIF, disable the ti,tilcdc,panel then + * change the status below to 'okay' + */ + status = "disabled"; }; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 0edf769ea95c..0177e3ed20fe 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -123,6 +123,10 @@ }; }; +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -175,6 +179,11 @@ status = "okay"; }; +&sata_refclk { + status = "okay"; + clock-frequency = <100000000>; +}; + &sata { status = "okay"; }; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index ee3932475ce7..c4729d0e6c19 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -173,6 +173,15 @@ rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; }; + bt_slow_clk: bt-clock { + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>, <&bt_clock_bias>; + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&ecap2 0 30518 0>; + }; + /* ARM local RAM */ memory@ffff0000 { compatible = "syscon", "simple-mfd"; @@ -191,6 +200,10 @@ }; }; +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -212,6 +225,20 @@ bias-disable; }; }; + + bt_clock_bias: bt-clock-bias-groups { + disable { + groups = "cp2"; + bias-disable; + }; + }; + + bt_pic_bias: bt-pic-bias-groups { + disable { + groups = "cp20"; + bias-disable; + }; + }; }; /* Input port 1 */ @@ -221,6 +248,22 @@ pinctrl-0 = <&serial1_rxtx_pins>; }; +&serial2 { + pinctrl-names = "default"; + pinctrl-0 = <&serial2_rxtx_pins>, <&serial2_rtscts_pins>, <&bt_pic_bias>; + status = "okay"; + + bluetooth { + compatible = "ti,cc2560"; + clocks = <&bt_slow_clk>; + clock-names = "ext_clock"; + enable-gpios = <&gpio 73 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + nvmem-cells = <&bdaddr>; + nvmem-cell-names = "bd-address"; + }; +}; + &rtc0 { status = "okay"; }; @@ -239,6 +282,12 @@ pagesize = <64>; read-only; reg = <0x50>; + #address-cells = <1>; + #size-cells = <1>; + + bdaddr: bdaddr@3f06 { + reg = <0x3f06 0x06>; + }; }; }; @@ -323,6 +372,10 @@ }; }; +&ecap2 { + status = "okay"; +}; + &ehrpwm0 { status = "okay"; }; @@ -336,6 +389,39 @@ gpios = <6 GPIO_ACTIVE_HIGH>; output-high; }; + + /* Don't impede Bluetooth clock signal */ + bt_clock_en { + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + input; + }; + + /* + * There is a PIC microcontroller for interfacing with an Apple MFi + * chip. This interferes with normal Bluetooth operation, so we need + * to make sure it is turned off. Note: The publicly available + * schematics from LEGO don't show that these pins are connected to + * anything, but they are present in the source code from LEGO. + */ + + bt_pic_en { + gpio-hog; + gpios = <51 GPIO_ACTIVE_HIGH>; + output-low; + }; + + bt_pic_rst { + gpio-hog; + gpios = <78 GPIO_ACTIVE_HIGH>; + output-high; + }; + + bt_pic_cts { + gpio-hog; + gpios = <87 GPIO_ACTIVE_HIGH>; + input; + }; }; &usb_phy { diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 0f4f817a9e22..47aa53ba6b92 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -32,6 +32,25 @@ reg = <0xfffee000 0x2000>; }; }; + clocks: clocks { + ref_clk: ref_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ref_clk"; + }; + sata_refclk: sata_refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "sata_refclk"; + status = "disabled"; + }; + usb_refclkin: usb_refclkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "usb_refclkin"; + status = "disabled"; + }; + }; dsp: dsp@11800000 { compatible = "ti,da850-dsp"; reg = <0x11800000 0x40000>, @@ -42,6 +61,8 @@ reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; interrupt-parent = <&intc>; interrupts = <28>; + clocks = <&psc0 15>; + resets = <&psc0 15>; status = "disabled"; }; soc@1c00000 { @@ -52,6 +73,38 @@ ranges = <0x0 0x01c00000 0x400000>; interrupt-parent = <&intc>; + psc0: clock-controller@10000 { + compatible = "ti,da850-psc0"; + reg = <0x10000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>, + <&pll0_sysclk 4>, <&pll0_sysclk 6>, + <&async1_clk>; + clock-names = "pll0_sysclk1", "pll0_sysclk2", + "pll0_sysclk4", "pll0_sysclk6", + "async1"; + }; + pll0: clock-controller@11000 { + compatible = "ti,da850-pll0"; + reg = <0x11000 0x1000>; + clocks = <&ref_clk>, <&pll1_sysclk 3>; + clock-names = "clksrc", "extclksrc"; + + pll0_pllout: pllout { + #clock-cells = <0>; + }; + pll0_sysclk: sysclk { + #clock-cells = <1>; + }; + pll0_auxclk: auxclk { + #clock-cells = <0>; + }; + pll0_obsclk: obsclk { + #clock-cells = <0>; + }; + }; pmx_core: pinmux@14120 { compatible = "pinctrl-single"; reg = <0x14120 0x50>; @@ -281,8 +334,41 @@ usb_phy: usb-phy { compatible = "ti,da830-usb-phy"; #phy-cells = <1>; + clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>; + clock-names = "usb0_clk48", "usb1_clk48"; status = "disabled"; }; + usb_phy_clk: usb-phy-clocks { + compatible = "ti,da830-usb-phy-clocks"; + #clock-cells = <1>; + clocks = <&psc1 1>, <&usb_refclkin>, + <&pll0_auxclk>; + clock-names = "fck", "usb_refclkin", "auxclk"; + }; + ehrpwm_tbclk: ehrpwm_tbclk { + compatible = "ti,da830-tbclksync"; + #clock-cells = <0>; + clocks = <&psc1 17>; + clock-names = "fck"; + }; + div4p5_clk: div4.5 { + compatible = "ti,da830-div4p5ena"; + #clock-cells = <0>; + clocks = <&pll0_pllout>; + clock-names = "pll0_pllout"; + }; + async1_clk: async1 { + compatible = "ti,da850-async1-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 3>, <&div4p5_clk>; + clock-names = "pll0_sysclk3", "div4.5"; + }; + async3_clk: async3 { + compatible = "ti,da850-async3-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>; + clock-names = "pll0_sysclk2", "pll1_sysclk2"; + }; }; edma0: edma@0 { compatible = "ti,edma3-tpcc"; @@ -294,18 +380,21 @@ #dma-cells = <2>; ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; + power-domains = <&psc0 0>; }; edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc0 1>; }; edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc0 2>; }; edma1: edma@230000 { compatible = "ti,edma3-tpcc"; @@ -317,12 +406,14 @@ #dma-cells = <2>; ti,tptcs = <&edma1_tptc0 7>; + power-domains = <&psc1 0>; }; edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc1 21>; }; serial0: serial@42000 { compatible = "ti,da830-uart", "ns16550a"; @@ -330,6 +421,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <25>; + clocks = <&psc0 9>; + power-domains = <&psc0 9>; status = "disabled"; }; serial1: serial@10c000 { @@ -338,6 +431,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <53>; + clocks = <&psc1 12>; + power-domains = <&psc1 12>; status = "disabled"; }; serial2: serial@10d000 { @@ -346,6 +441,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <61>; + clocks = <&psc1 13>; + power-domains = <&psc1 13>; status = "disabled"; }; rtc0: rtc@23000 { @@ -353,6 +450,8 @@ reg = <0x23000 0x1000>; interrupts = <19 19>; + clocks = <&pll0_auxclk>; + clock-names = "int-clk"; status = "disabled"; }; i2c0: i2c@22000 { @@ -361,6 +460,7 @@ interrupts = <15>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pll0_auxclk>; status = "disabled"; }; i2c1: i2c@228000 { @@ -369,11 +469,21 @@ interrupts = <51>; #address-cells = <1>; #size-cells = <0>; + clocks = <&psc1 11>; + power-domains = <&psc1 11>; status = "disabled"; }; + clocksource: timer@20000 { + compatible = "ti,da830-timer"; + reg = <0x20000 0x1000>; + interrupts = <12>, <13>; + interrupt-names = "tint12", "tint34"; + clocks = <&pll0_auxclk>; + }; wdt: wdt@21000 { compatible = "ti,davinci-wdt"; reg = <0x21000 0x1000>; + clocks = <&pll0_auxclk>; status = "disabled"; }; mmc0: mmc@40000 { @@ -384,12 +494,14 @@ interrupts = <16>; dmas = <&edma0 16 0>, <&edma0 17 0>; dma-names = "rx", "tx"; + clocks = <&psc0 5>; status = "disabled"; }; vpif: video@217000 { compatible = "ti,da850-vpif"; reg = <0x217000 0x1000>; interrupts = <92>; + power-domains = <&psc1 9>; status = "disabled"; /* VPIF capture port */ @@ -412,6 +524,7 @@ interrupts = <72>; dmas = <&edma1 28 0>, <&edma1 29 0>; dma-names = "rx", "tx"; + clocks = <&psc1 18>; status = "disabled"; }; ehrpwm0: pwm@300000 { @@ -419,6 +532,9 @@ "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; + clocks = <&psc1 17>, <&ehrpwm_tbclk>; + clock-names = "fck", "tbclk"; + power-domains = <&psc1 17>; status = "disabled"; }; ehrpwm1: pwm@302000 { @@ -426,6 +542,9 @@ "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x302000 0x2000>; + clocks = <&psc1 17>, <&ehrpwm_tbclk>; + clock-names = "fck", "tbclk"; + power-domains = <&psc1 17>; status = "disabled"; }; ecap0: ecap@306000 { @@ -433,6 +552,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x306000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; ecap1: ecap@307000 { @@ -440,6 +562,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x307000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; ecap2: ecap@308000 { @@ -447,6 +572,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x308000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; spi0: spi@41000 { @@ -459,6 +587,8 @@ interrupts = <20>; dmas = <&edma0 14 0>, <&edma0 15 0>; dma-names = "rx", "tx"; + clocks = <&psc0 4>; + power-domains = <&psc0 4>; status = "disabled"; }; spi1: spi@30e000 { @@ -471,6 +601,8 @@ interrupts = <56>; dmas = <&edma0 18 0>, <&edma0 19 0>; dma-names = "rx", "tx"; + clocks = <&psc1 10>; + power-domains = <&psc1 10>; status = "disabled"; }; usb0: usb@200000 { @@ -482,6 +614,8 @@ dr_mode = "otg"; phys = <&usb_phy 0>; phy-names = "usb-phy"; + clocks = <&psc1 1>; + clock-ranges; status = "disabled"; #address-cells = <1>; @@ -505,6 +639,7 @@ interrupts = <58>; #dma-cells = <2>; #dma-channels = <4>; + power-domains = <&psc1 1>; status = "okay"; }; }; @@ -512,13 +647,31 @@ compatible = "ti,da850-ahci"; reg = <0x218000 0x2000>, <0x22c018 0x4>; interrupts = <67>; + clocks = <&psc1 8>, <&sata_refclk>; + clock-names = "fck", "refclk"; status = "disabled"; }; + pll1: clock-controller@21a000 { + compatible = "ti,da850-pll1"; + reg = <0x21a000 0x1000>; + clocks = <&ref_clk>; + clock-names = "clksrc"; + + pll1_sysclk: sysclk { + #clock-cells = <1>; + }; + pll1_obsclk: obsclk { + #clock-cells = <0>; + }; + }; mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x224000 0x1000>; + clocks = <&psc1 5>; + clock-names = "fck"; + power-domains = <&psc1 5>; status = "disabled"; }; eth0: ethernet@220000 { @@ -534,6 +687,8 @@ 35 36 >; + clocks = <&psc1 5>; + power-domains = <&psc1 5>; status = "disabled"; }; usb1: usb@225000 { @@ -542,6 +697,7 @@ interrupts = <59>; phys = <&usb_phy 1>; phy-names = "usb-phy"; + clocks = <&psc1 2>; status = "disabled"; }; gpio: gpio@226000 { @@ -552,6 +708,8 @@ interrupts = <42 43 44 45 46 47 48 49 50>; ti,ngpio = <144>; ti,davinci-gpio-unbanked = <0>; + clocks = <&psc1 3>; + clock-names = "gpio"; status = "disabled"; interrupt-controller; #interrupt-cells = <2>; @@ -700,6 +858,17 @@ <&pmx_core 142 147 1>, <&pmx_core 143 146 1>; }; + psc1: clock-controller@227000 { + compatible = "ti,da850-psc1"; + reg = <0x227000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, + <&async3_clk>; + clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3"; + assigned-clocks = <&async3_clk>; + assigned-clock-parents = <&pll1_sysclk 2>; + }; pinconf: pin-controller@22c00c { compatible = "ti,da850-pupd"; reg = <0x22c00c 0x8>; @@ -713,6 +882,7 @@ reg-names = "mpu", "dat"; interrupts = <54>; interrupt-names = "common"; + power-domains = <&psc1 7>; status = "disabled"; dmas = <&edma0 1 1>, <&edma0 0 1>; @@ -724,6 +894,9 @@ reg = <0x213000 0x1000>; interrupts = <52>; max-pixelclock = <37500>; + clocks = <&psc1 16>; + clock-names = "fck"; + power-domains = <&psc1 16>; status = "disabled"; }; }; @@ -735,6 +908,9 @@ reg = <0x68000000 0x00008000>; ranges = <0 0 0x60000000 0x08000000 1 0 0x68000000 0x00008000>; + clocks = <&psc0 3>; + clock-names = "aemif"; + clock-ranges; status = "disabled"; }; memctrl: memory-controller@b0000000 { diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 33230c8b2951..7e18147dc563 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -20,6 +20,11 @@ id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; }; + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + }; + sound0: sound0 { compatible = "simple-audio-card"; simple-audio-card,name = "DRA7xx-EVM"; @@ -198,8 +203,13 @@ extcon = <&extcon_usb1>; }; +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb2 { dr_mode = "host"; + extcon = <&extcon_usb2>; }; &atl { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 0894593860d6..6ed5f9156270 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -106,11 +106,6 @@ enable-active-high; }; - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; - }; - vtt_fixed: fixedregulator-vtt { compatible = "regulator-fixed"; regulator-name = "vtt_fixed"; @@ -406,10 +401,6 @@ vdd-supply = <&smps123_reg>; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &elm { status = "okay"; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e03495a799ce..a0ddf497e8cd 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1893,7 +1893,7 @@ }; }; - dcan1: can@481cc000 { + dcan1: can@4ae3c000 { compatible = "ti,dra7-d_can"; ti,hwmods = "dcan1"; reg = <0x4ae3c000 0x2000>; @@ -1903,7 +1903,7 @@ status = "disabled"; }; - dcan2: can@481d0000 { + dcan2: can@48480000 { compatible = "ti,dra7-d_can"; ti,hwmods = "dcan2"; reg = <0x48480000 0x2000>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index b7aeaeeead3b..c471bf3277b4 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -265,3 +265,11 @@ /* Supplied by VDA_1V8_PHY */ vdda_video-supply = <&lp8732_ldo1_reg>; }; + +&extcon_usb1 { + vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; +}; + +&extcon_usb2 { + vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index df174f5c15d1..e297b923b71a 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -391,6 +391,7 @@ &usb2 { dr_mode = "host"; + extcon = <&extcon_usb2>; }; &mmc1 { diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 91e93ab588ca..8f9df09155d8 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -18,6 +18,16 @@ compatible = "arm,cortex-a15"; reg = <1>; operating-points-v2 = <&cpu0_opp_table>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ + + vbb-supply = <&abb_mpu>; }; }; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index c07f0051844d..5a46163d465f 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -436,3 +436,17 @@ phys = <&pcie1_phy>, <&pcie2_phy>; phy-names = "pcie-phy0", "pcie-phy1"; }; + +&extcon_usb1 { + vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; +}; + +&extcon_usb2 { + vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; +}; + +&m_can0 { + can-transceiver { + max-bitrate = <5000000>; + }; +}; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 1c88c581ff18..613e4dc0ed3e 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -11,9 +11,73 @@ / { compatible = "ti,dra762", "ti,dra7"; + ocp { + target-module@42c01900 { + compatible = "ti,sysc-dra7-mcan", "ti,sysc"; + ranges = <0x0 0x42c00000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x42c01900 0x4>, + <0x42c01904 0x4>, + <0x42c01908 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET | + SYSC_DRA7_MCAN_ENAWAKEUP)>; + ti,syss-mask = <1>; + clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>; + clock-names = "fck"; + + m_can0: mcan@1a00 { + compatible = "bosch,m_can"; + reg = <0x1a00 0x4000>, <0x0 0x18FC>; + reg-names = "m_can", "message_ram"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&mcan_clk>, <&l3_iclk_div>; + clock-names = "cclk", "hclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + }; + }; + }; + }; /* MCAN interrupts are hard-wired to irqs 67, 68 */ &crossbar_mpu { ti,irqs-skip = <10 67 68 133 139 140>; }; + +&scm_conf_clocks { + dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_x2_ck>; + ti,max-div = <63>; + reg = <0x03fc>; + ti,bit-shift=<20>; + ti,latch-bit=<26>; + assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>; + assigned-clock-rates = <80000000>; + }; + + dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>; + reg = <0x3fc>; + ti,bit-shift = <29>; + ti,latch-bit=<26>; + assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; + assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>; + }; + + mcan_clk: mcan_clk@3fc { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; + ti,bit-shift = <27>; + reg = <0x3fc>; + }; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 0af44b7eadb9..1bb8e5c9d029 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the KZM9D board * * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index fec1241b858f..373ea8720769 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the EMEV2 SoC * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 962af97c1883..27a1ee28c3bb 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -78,6 +78,22 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cmu CLK_ARM_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; + + operating-points = < + 1000000 1150000 + 900000 1112500 + 800000 1075000 + 700000 1037500 + 600000 1000000 + 500000 962500 + 400000 925000 + 300000 887500 + 200000 850000 + 100000 850000 + >; }; }; @@ -226,7 +242,7 @@ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_TMU_APBIF>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index dfe41b698745..6085e92ac2d7 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -735,7 +735,7 @@ reg = <0x100C0000 0x100>; interrupts = <2 4>; status = "disabled"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; jpeg_codec: jpeg-codec@11840000 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 88fb47cef9a8..b6091c27f155 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -55,6 +55,19 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x901>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <160000>; + + operating-points = < + 1200000 1250000 + 1000000 1150000 + 800000 1075000 + 500000 975000 + 400000 975000 + 200000 950000 + >; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index dc11ca1673e8..c0476c290977 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -94,6 +94,8 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; key-down { gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; @@ -138,6 +140,8 @@ compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&max77693_irq>; reg = <0x66>; regulators { @@ -184,6 +188,8 @@ compatible = "maxim,max17047"; interrupt-parent = <&gpx2>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&max77693_fuel_irq>; reg = <0x36>; maxim,over-heat-temp = <700>; @@ -574,6 +580,8 @@ compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; + pinctrl-0 = <&max77686_irq>; + pinctrl-names = "default"; reg = <0x09>; #clock-cells = <1>; @@ -1007,6 +1015,31 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep1>; + gpio_keys: gpio-keys { + samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx0-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max77693_irq: max77693-irq { + samsung,pins = "gpx1-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max77693_fuel_irq: max77693-fuel-irq { + samsung,pins = "gpx2-3"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + sdhci2_cd: sdhci2-cd-irq { + samsung,pins = "gpx3-4"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + hdmi_hpd: hdmi-hpd { samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; @@ -1238,7 +1271,7 @@ bus-width = <4>; cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; cd-inverted; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi deleted file mode 100644 index 489b58c619ee..000000000000 --- a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos4412 TMU sensor configuration - * - * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <16>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <55>; -samsung,tmu_min_efuse_value = <40>; -samsung,tmu_max_efuse_value = <100>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 7b43c10c510b..51f72f0327e5 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -49,21 +49,30 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA01>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@a02 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA02>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@a03 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA03>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 5d2f0a06fbef..67f9b4504a42 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -169,6 +169,11 @@ pwm: pwm@12dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x12DD0000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 2daf505b3d08..da163a40af15 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -84,6 +84,29 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1700000000>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <140000>; + + operating-points = < + 1700000 1300000 + 1600000 1250000 + 1500000 1225000 + 1400000 1200000 + 1300000 1150000 + 1200000 1125000 + 1100000 1100000 + 1000000 1075000 + 900000 1050000 + 800000 1025000 + 700000 1012500 + 600000 1000000 + 500000 975000 + 400000 950000 + 300000 937500 + 200000 925000 + >; + #cooling-cells = <2>; /* min followed by max */ }; }; @@ -278,7 +301,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; sata: sata@122f0000 { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 20e789ea136f..57fc9c949e54 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -93,7 +93,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu1: tmu@10064000 { @@ -102,7 +102,7 @@ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu2: tmu@10068000 { @@ -111,7 +111,7 @@ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu3: tmu@1006c000 { @@ -120,7 +120,7 @@ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; mmc_0: mmc@12200000 { diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index a8e449471304..0ee6e92a3c29 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -38,6 +38,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -49,6 +50,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -60,6 +62,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -83,6 +86,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -94,6 +98,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -105,6 +110,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x103>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; diff --git a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi deleted file mode 100644 index fbc77cb58473..000000000000 --- a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos5420 TMU sensor configuration - * - * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - * Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <16>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <55>; -samsung,tmu_min_efuse_value = <0>; -samsung,tmu_max_efuse_value = <100>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index f4e8c5823bc2..aaff15880761 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -738,7 +738,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu1: tmu@10064000 { @@ -747,7 +747,7 @@ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu2: tmu@10068000 { @@ -756,7 +756,7 @@ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu3: tmu@1006c000 { @@ -765,7 +765,7 @@ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_gpu: tmu@100a0000 { @@ -774,7 +774,7 @@ interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; sysmmu_g2dr: sysmmu@10a60000 { diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index 7c130a00d1a8..e4a5857c135f 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -37,6 +37,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -48,6 +49,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -59,6 +61,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x103>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -69,8 +72,8 @@ cpu4: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; - clocks = <&clock CLK_ARM_CLK>; reg = <0x0>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -82,6 +85,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -93,6 +97,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -104,6 +109,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts new file mode 100644 index 000000000000..ebefb7297379 --- /dev/null +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the Storm Semiconductor SL93512R_BRD + * Gemini reference design, also initially called + * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor. + * The series were later acquired by Cortina Systems. + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD"; + compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 64 MB Samsung K4H511638B */ + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-wps { + debounce-interval = <50>; + wakeup-source; + linux,code = <KEY_WPS_BUTTON>; + label = "WPS"; + /* Conflict with NAND flash */ + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + button-setup { + debounce-interval = <50>; + wakeup-source; + linux,code = <KEY_SETUP>; + label = "factory reset"; + /* Conflict with NAND flash */ + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-green-harddisk { + label = "sq201:green:harddisk"; + /* Conflict with LCD (no problem) */ + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + led-green-wireless { + label = "sq201:green:wireless"; + /* Conflict with NAND flash CE0 (no problem) */ + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + /* Uses MDC and MDIO */ + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* This is a Marvell 88E1111 ethernet transciever */ + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + /* Check pin collisions */ + gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + switch@0 { + compatible = "vitesse,vsc7385"; + reg = <0>; + /* Specified for 2.5 MHz or below */ + spi-max-frequency = <2500000>; + gpio-controller; + #gpio-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + vsc: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + + soc { + flash@30000000 { + status = "okay"; + /* 16MB of flash */ + reg = <0x30000000 0x01000000>; + + partition@0 { + label = "BOOT"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@120000 { + label = "Kern"; + reg = <0x00020000 0x00300000>; + }; + partition@320000 { + label = "Ramdisk"; + reg = <0x00320000 0x00600000>; + }; + partition@920000 { + label = "Application"; + reg = <0x00920000 0x00600000>; + }; + partition@f20000 { + label = "VCTL"; + reg = <0x00f20000 0x00020000>; + read-only; + }; + partition@f40000 { + label = "CurConf"; + reg = <0x00f40000 0x000a0000>; + read-only; + }; + partition@fe0000 { + label = "FIS directory"; + reg = <0x00fe0000 0x00020000>; + read-only; + }; + }; + + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0egrp cover line 16 used by HD LED + * gpio0fgrp cover line 17, 18 used by wireless LED and reset button + * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY + * gpio0kgrp cover line 31 used by USB LED + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0egrp", + "gpio0fgrp", + "gpio0hgrp"; + }; + }; + /* + * gpio1dgrp cover lines used by SPI for + * the Vitesse chip (28-31) + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + }; + /* Control pad skew comes from sl_switch.c in the vendor code */ + conf0 { + pins = "P10 GMAC1 TXC"; + skew-delay = <5>; + }; + conf1 { + pins = "V11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf2 { + pins = "T11 GMAC1 RXC"; + skew-delay = <8>; + }; + conf3 { + pins = "U11 GMAC1 RXDV"; + skew-delay = <7>; + }; + conf4 { + pins = "V7 GMAC0 TXC"; + skew-delay = <10>; + }; + conf5 { + pins = "P8 GMAC0 TXEN"; + skew-delay = <7>; /* 5 at another place? */ + }; + conf6 { + pins = "T8 GMAC0 RXC"; + skew-delay = <15>; + }; + conf7 { + pins = "R8 GMAC0 RXDV"; + skew-delay = <0>; + }; + conf8 { + /* The data lines all have default skew */ + pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", + "P9 GMAC0 RXD2", "R9 GMAC0 RXD3", + "R11 GMAC1 RXD0", "P11 GMAC1 RXD1", + "V12 GMAC1 RXD2", "U12 GMAC1 RXD3", + "R10 GMAC1 TXD0", "T10 GMAC1 TXD1", + "U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; + skew-delay = <7>; + }; + /* Appears in sl351x_gmac.c in the vendor code */ + conf9 { + pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", + "R7 GMAC0 TXD2", "P7 GMAC0 TXD3"; + skew-delay = <5>; + }; + }; + }; + }; + + /* Both interfaces brought out on SATA connectors */ + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + + pci@50000000 { + status = "okay"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + + ata@63000000 { + status = "okay"; + }; + + ata@63400000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index e5cf9d1a98cd..3787cf3763c4 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -55,6 +55,75 @@ }; }; + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + /* Uses MDC and MDIO */ + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* This is a Marvell 88E1111 ethernet transciever */ + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + /* Check pin collisions */ + gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + switch@0 { + compatible = "vitesse,vsc7395"; + reg = <0>; + /* Specified for 2.5 MHz or below */ + spi-max-frequency = <2500000>; + gpio-controller; + #gpio-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + vsc: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + soc { flash@30000000 { /* @@ -108,6 +177,7 @@ /* * gpio0fgrp cover line 18 used by reset button * gpio0ggrp cover line 20 used by info LED + * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY * gpio0kgrp cover line 31 used by USB LED */ gpio0_default_pins: pinctrl-gpio0 { @@ -115,9 +185,76 @@ function = "gpio0"; groups = "gpio0fgrp", "gpio0ggrp", + "gpio0hgrp", "gpio0kgrp"; }; }; + /* + * gpio0dgrp cover lines used by the SPI + * to the Vitesse G5x chip. + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + }; + /* Settings come from memory dump in PLATO */ + conf0 { + pins = "V8 GMAC0 RXDV"; + skew-delay = <0>; + }; + conf1 { + pins = "Y7 GMAC0 RXC"; + skew-delay = <15>; + }; + conf2 { + pins = "T8 GMAC0 TXEN"; + skew-delay = <7>; + }; + conf3 { + pins = "U8 GMAC0 TXC"; + skew-delay = <10>; + }; + conf4 { + pins = "T10 GMAC1 RXDV"; + skew-delay = <7>; + }; + conf5 { + pins = "Y11 GMAC1 RXC"; + skew-delay = <8>; + }; + conf6 { + pins = "W11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf7 { + pins = "V11 GMAC1 TXC"; + skew-delay = <5>; + }; + conf8 { + /* The data lines all have default skew */ + pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1", + "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3", + "T7 GMAC0 TXD0", "U6 GMAC0 TXD1", + "V7 GMAC0 TXD2", "U7 GMAC0 TXD3", + "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1", + "T11 GMAC1 RXD2", "W12 GMAC1 RXD3", + "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1", + "W10 GMAC1 TXD2", "T9 GMAC1 TXD3"; + skew-delay = <7>; + }; + /* Set up drive strength on GMAC0 and GMAC1 to 16 mA */ + conf9 { + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + drive-strength = <16>; + }; + }; }; }; @@ -132,6 +269,11 @@ pinctrl-0 = <&gpio0_default_pins>; }; + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + pci@50000000 { status = "okay"; interrupt-map-mask = <0xf800 0 0 7>; @@ -154,6 +296,23 @@ <0x6000 0 0 4 &pci_intc 2>; }; + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + ata@63000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi new file mode 100644 index 000000000000..e31a9e3c18a2 --- /dev/null +++ b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the GR-Peach audiocamera shield expansion board + * + * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> + */ + +#include "r7s72100.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/r7s72100-pinctrl.h> + +/ { + /* On-board camera clock. */ + camera_clk: camera_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +&pinctrl { + i2c1_pins: i2c1 { + /* P1_2 as SCL; P1_3 as SDA */ + pinmux = <RZA1_PINMUX(1, 2, 1)>, <RZA1_PINMUX(1, 3, 1)>; + }; + + vio_pins: vio { + /* CEU pins: VIO_D[0-10], VIO_VD, VIO_HD, VIO_CLK */ + pinmux = <RZA1_PINMUX(1, 0, 5)>, /* VIO_VD */ + <RZA1_PINMUX(1, 1, 5)>, /* VIO_HD */ + <RZA1_PINMUX(2, 0, 7)>, /* VIO_D0 */ + <RZA1_PINMUX(2, 1, 7)>, /* VIO_D1 */ + <RZA1_PINMUX(2, 2, 7)>, /* VIO_D2 */ + <RZA1_PINMUX(2, 3, 7)>, /* VIO_D3 */ + <RZA1_PINMUX(2, 4, 7)>, /* VIO_D4 */ + <RZA1_PINMUX(2, 5, 7)>, /* VIO_D5 */ + <RZA1_PINMUX(2, 6, 7)>, /* VIO_D6 */ + <RZA1_PINMUX(2, 7, 7)>, /* VIO_D7 */ + <RZA1_PINMUX(10, 0, 6)>; /* VIO_CLK */ + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <100000>; + + camera@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + + clocks = <&camera_clk>; + + port { + mt9v111_out: endpoint { + remote-endpoint = <&ceu_in>; + }; + }; + }; +}; + +&ceu { + pinctrl-names = "default"; + pinctrl-0 = <&vio_pins>; + + status = "okay"; + + port { + ceu_in: endpoint { + hsync-active = <1>; + vsync-active = <1>; + bus-width = <8>; + pclk-sample = <1>; + remote-endpoint = <&mt9v111_out>; + }; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index ed14aeac0566..50278715de76 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -56,6 +56,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; cpu@902 { @@ -65,6 +75,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; cpu@903 { @@ -74,6 +94,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; }; diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts new file mode 100644 index 000000000000..db52ddccabc3 --- /dev/null +++ b/arch/arm/boot/dts/imx31-lite.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com> + +/dts-v1/; + +#include "imx31.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "LogicPD i.MX31 Lite"; + compatible = "logicpd,imx31-lite", "fsl,imx31"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x8000000>; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led1 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ata { + status = "okay"; +}; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&spi2 { + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13783"; + reg = <0>; + spi-cs-high; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + + fsl,mc13xxx-uses-adc; + fsl,mc13xxx-uses-rtc; + + regulators { + sw1a { /* QVCC */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + sw1b { /* QVCC */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2a { /* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2b { /* NVCC10 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + violo { /* NVCC1 and NVCC7 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + viohi { /* VIOHI */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vaudio { /* VAUDIO */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vcam { /* NVCC4 */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vgen { /* NVCC5 / NVCC8 and NVCC6 / NVCC9 */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc2 { /* NVCC3 */ + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&uart1 { + uart-has-rtscts; + status = "okay"; +}; + +/* Routed to the extension board */ +&uart2 { + uart-has-rtscts; + status = "okay"; +}; + +/* Routed to the extension board */ +&uart3 { + uart-has-rtscts; + status = "okay"; +}; + +&weim { + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x0 0x200000>; + bank-width = <2>; + linux,mtd-name = "physmap-flash.0"; + fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>; + }; + + ethernet@4,0 { + compatible = "smsc,lan9117", "smsc,lan9115"; + reg = <4 0x0 0x100>; + interrupt-parent = <&gpio1>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,irq-push-pull; + fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>; + }; +}; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 4642c8169a65..ca1419ca303c 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ // +// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com> // Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> / { @@ -15,11 +16,20 @@ memory { device_type = "memory"; }; aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + spi0 = &spi1; + spi1 = &spi2; + spi2 = &spi3; }; cpus { @@ -47,6 +57,14 @@ interrupt-parent = <&avic>; ranges; + iram: iram@1fffc000 { + compatible = "mmio-sram"; + reg = <0x1fffc000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1fffc000 0x4000>; + }; + aips@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -54,6 +72,34 @@ reg = <0x43f00000 0x100000>; ranges; + i2c1: i2c@43f80000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f80000 0x4000>; + interrupts = <10>; + clocks = <&clks 33>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@43f84000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f84000 0x4000>; + interrupts = <3>; + clocks = <&clks 35>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ata: ata@43f8c000 { + compatible = "fsl,imx31-pata", "fsl,imx27-pata"; + reg = <0x43f8c000 0x4000>; + interrupts = <15>; + clocks = <&clks 26>; + status = "disabled"; + }; + uart1: serial@43f90000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43f90000 0x4000>; @@ -72,6 +118,29 @@ status = "disabled"; }; + i2c2: i2c@43f98000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f98000 0x4000>; + interrupts = <4>; + clocks = <&clks 34>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@43fa4000 { + compatible = "fsl,imx31-cspi"; + reg = <0x43fa4000 0x4000>; + interrupts = <14>; + clocks = <&clks 10>, <&clks 53>; + clock-names = "ipg", "per"; + dmas = <&sdma 8 8 0>, <&sdma 9 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + kpp: kpp@43fa8000 { compatible = "fsl,imx31-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; @@ -106,6 +175,28 @@ reg = <0x50000000 0x100000>; ranges; + sdhci1: sdhci@50004000 { + compatible = "fsl,imx31-mmc"; + reg = <0x50004000 0x4000>; + interrupts = <9>; + clocks = <&clks 10>, <&clks 20>; + clock-names = "ipg", "per"; + dmas = <&sdma 20 3 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + sdhci2: sdhci@50008000 { + compatible = "fsl,imx31-mmc"; + reg = <0x50008000 0x4000>; + interrupts = <8>; + clocks = <&clks 10>, <&clks 21>; + clock-names = "ipg", "per"; + dmas = <&sdma 21 3 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + uart3: serial@5000c000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; @@ -115,6 +206,19 @@ status = "disabled"; }; + spi2: cspi@50010000 { + compatible = "fsl,imx31-cspi"; + reg = <0x50010000 0x4000>; + interrupts = <13>; + clocks = <&clks 10>, <&clks 54>; + clock-names = "ipg", "per"; + dmas = <&sdma 6 8 0>, <&sdma 7 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + iim: iim@5001c000 { compatible = "fsl,imx31-iim", "fsl,imx27-iim"; reg = <0x5001c000 0x1000>; @@ -137,6 +241,19 @@ #clock-cells = <1>; }; + spi3: cspi@53f84000 { + compatible = "fsl,imx31-cspi"; + reg = <0x53f84000 0x4000>; + interrupts = <17>; + clocks = <&clks 10>, <&clks 28>; + clock-names = "ipg", "per"; + dmas = <&sdma 10 8 0>, <&sdma 11 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gpt: timer@53f90000 { compatible = "fsl,imx31-gpt"; reg = <0x53f90000 0x4000>; @@ -144,6 +261,112 @@ clocks = <&clks 10>, <&clks 22>; clock-names = "ipg", "per"; }; + + gpio3: gpio@53fa4000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fa4000 0x4000>; + interrupts = <56>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rng@53fb0000 { + compatible = "fsl,imx31-rnga"; + reg = <0x53fb0000 0x4000>; + interrupts = <22>; + clocks = <&clks 29>; + }; + + gpio1: gpio@53fcc000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fcc000 0x4000>; + interrupts = <52>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@53fd0000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fd0000 0x4000>; + interrupts = <51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdma: sdma@53fd4000 { + compatible = "fsl,imx31-sdma"; + reg = <0x53fd4000 0x4000>; + interrupts = <34>; + clocks = <&clks 10>, <&clks 27>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin"; + }; + + rtc: rtc@53fd8000 { + compatible = "fsl,imx31-rtc", "fsl,imx21-rtc"; + reg = <0x53fd8000 0x4000>; + interrupts = <25>; + clocks = <&clks 2>, <&clks 40>; + clock-names = "ref", "ipg"; + }; + + wdog: wdog@53fdc000 { + compatible = "fsl,imx31-wdt", "fsl,imx21-wdt"; + reg = <0x53fdc000 0x4000>; + clocks = <&clks 41>; + }; + + pwm: pwm@53fe0000 { + compatible = "fsl,imx31-pwm", "fsl,imx27-pwm"; + reg = <0x53fe0000 0x4000>; + interrupts = <26>; + clocks = <&clks 10>, <&clks 42>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + emi@b8000000 { /* External Memory Interface */ + compatible = "simple-bus"; + reg = <0xb8000000 0x5000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + nfc: nand@b8000000 { + compatible = "fsl,imx31-nand", "fsl,imx27-nand"; + reg = <0xb8000000 0x1000>; + interrupts = <33>; + clocks = <&clks 9>; + dmas = <&sdma 30 17 0>; + dma-names = "rx-tx"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + weim: weim@b8002000 { + compatible = "fsl,imx31-weim", "fsl,imx27-weim"; + reg = <0xb8002000 0x1000>; + clocks = <&clks 56>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xa0000000 0x08000000 + 1 0 0xa8000000 0x08000000 + 2 0 0xb0000000 0x02000000 + 3 0 0xb2000000 0x02000000 + 4 0 0xb4000000 0x02000000 + 5 0 0xb6000000 0x02000000>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index f0622ec4ba9c..682a99783ee6 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -98,14 +98,6 @@ status = "okay"; }; -&usbh2 { - status = "okay"; -}; - -&usbh3 { - status = "okay"; -}; - &usbotg { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h index 97e6e7f4ebdd..43863347362e 100644 --- a/arch/arm/boot/dts/imx50-pinfunc.h +++ b/arch/arm/boot/dts/imx50-pinfunc.h @@ -34,7 +34,7 @@ #define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1 0x02c 0x2d8 0x000 0x2 0x0 #define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7 0x02c 0x2d8 0x000 0x6 0x0 #define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR 0x02c 0x2d8 0x000 0x7 0x0 -#define MX50_PAD_KEY_COL2__KPP_COL_1 0x030 0x2dc 0x000 0x0 0x0 +#define MX50_PAD_KEY_COL2__KPP_COL_2 0x030 0x2dc 0x000 0x0 0x0 #define MX50_PAD_KEY_COL2__GPIO4_4 0x030 0x2dc 0x000 0x1 0x0 #define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2 0x030 0x2dc 0x000 0x2 0x0 #define MX50_PAD_KEY_COL2__CTI_TRIGOUT6 0x030 0x2dc 0x000 0x6 0x0 @@ -44,7 +44,7 @@ #define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3 0x034 0x2e0 0x000 0x2 0x0 #define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7 0x034 0x2e0 0x000 0x6 0x0 #define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0 0x034 0x2e0 0x000 0x7 0x0 -#define MX50_PAD_KEY_COL3__KPP_COL_2 0x038 0x2e4 0x000 0x0 0x0 +#define MX50_PAD_KEY_COL3__KPP_COL_3 0x038 0x2e4 0x000 0x0 0x0 #define MX50_PAD_KEY_COL3__GPIO4_6 0x038 0x2e4 0x000 0x1 0x0 #define MX50_PAD_KEY_COL3__EIM_NANDF_READY0 0x038 0x2e4 0x7b4 0x2 0x0 #define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0 0x038 0x2e4 0x7b8 0x6 0x0 diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index a9b712db9f6c..7fae2ffb76fe 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -209,24 +209,6 @@ status = "disabled"; }; - usbh2: usb@53f80400 { - compatible = "fsl,imx50-usb", "fsl,imx27-usb"; - reg = <0x53f80400 0x0200>; - interrupts = <16>; - clocks = <&clks IMX5_CLK_USBOH3_GATE>; - dr_mode = "host"; - status = "disabled"; - }; - - usbh3: usb@53f80600 { - compatible = "fsl,imx50-usb", "fsl,imx27-usb"; - reg = <0x53f80600 0x0200>; - interrupts = <17>; - clocks = <&clks IMX5_CLK_USBOH3_GATE>; - dr_mode = "host"; - status = "disabled"; - }; - gpio1: gpio@53f84000 { compatible = "fsl,imx50-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index b8ca73d3d379..ba60b0cb3cc1 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -170,20 +170,15 @@ mux-ext-port = <3>; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; - - usbh1phy: usbh1phy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clk_usb>; - clock-names = "main_clk"; - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - vcc-supply = <&vusb_reg>; - #phy-cells = <0>; - }; + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1reg>; + clocks = <&clk_usb>; + clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + vcc-supply = <&vusb_reg>; + #phy-cells = <0>; }; }; @@ -401,6 +396,10 @@ status = "okay"; }; +&pmu { + secure-reg-access; +}; + &ssi2 { status = "okay"; }; @@ -429,7 +428,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_hub_reset>; - fsl,usbphy = <&usbh1phy>; + fsl,usbphy = <&usbphy1>; phy_type = "ulpi"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index b3d952f37cdc..e9e819f2b0b7 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -83,19 +83,12 @@ fsl,mux-ext-port = <3>; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; - - usbh1phy: usbh1phy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX5_CLK_USB_PHY_GATE>; - clock-names = "main_clk"; - clock-frequency = <19200000>; - #phy-cells = <0>; - }; + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + #phy-cells = <0>; }; }; @@ -275,7 +268,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - fsl,usbphy = <&usbh1phy>; + fsl,usbphy = <&usbphy1>; dr_mode = "host"; phy_type = "ulpi"; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 8a878687197b..469cce2c0357 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -476,6 +476,17 @@ status = "okay"; }; +&gpio1 { + unused-sd3-wp-gpio { + /* + * See pinctrl_esdhc1 below for more details on this + */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; @@ -542,7 +553,7 @@ rmi4-f11@11 { reg = <0x11>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; @@ -554,6 +565,10 @@ remote-endpoint = <&display_in>; }; +&pmu { + secure-reg-access; +}; + &ssi2 { status = "okay"; }; @@ -578,10 +593,47 @@ rave-sp { compatible = "zii,rave-sp-rdu1"; current-speed = <38400>; + #address-cells = <1>; + #size-cells = <1>; watchdog { compatible = "zii,rave-sp-watchdog"; }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + + eeprom@ae { + compatible = "zii,rave-sp-eeprom"; + reg = <0xae 0x200>; + zii,eeprom-name = "switch-eeprom"; + /* + * Not all RDU1s have this functionality, so we + * rely on the bootloader to enable this + */ + status = "disabled"; + }; }; }; @@ -620,6 +672,10 @@ status = "okay"; }; +&wdog1 { + status = "disabled"; +}; + &iomuxc { pinctrl_ampgpio: ampgpiogrp { fsl,pins = < @@ -660,6 +716,23 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + /* + * GPIO1_1 is not directly used by eSDHC1 in + * any capacity, but earlier versions of RDU1 + * used that pin as WP GPIO for eSDHC3 and + * because of that that pad has an external + * pull-up resistor. This is problematic + * because out of reset the pad is configured + * as ALT0 which serves as SD1_WP, which, when + * pulled high by and external pull-up, will + * inhibit execution of any write request to + * attached eMMC device. + * + * To avoid this problem we configure the pad + * to ALT1/GPIO and avoid driving SD1_WP + * signal high. + */ + MX51_PAD_GPIO1_1__GPIO1_1 0x0000 >; }; diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts new file mode 100644 index 000000000000..26cf08549df4 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx51.dtsi" + +/ { + model = "ZII SCU2 Mezz Board"; + compatible = "zii,imx51-scu2-mezz", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + /* Will be filled by the bootloader */ + memory@90000000 { + reg = <0x90000000 0>; + }; + + aliases { + mdio-gpio0 = &mdio_gpio; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_mmc_reset>; + gpio = <&gpio3 13 GPIO_ACTIVE_LOW>; + startup-delay-us = <150000>; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + mdio_gpio: mdio-gpio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_swmdio>; + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>, /* mdc */ + <&gpio2 6 GPIO_ACTIVE_HIGH>; /* mdio */ + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "port4"; + }; + + port@1 { + reg = <1>; + label = "port5"; + }; + + port@2 { + reg = <2>; + label = "port6"; + }; + + port@3 { + reg = <3>; + label = "port7"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "mezz2esb"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled3: led3@3 { + reg = <3>; + label = "system:red:power"; + linux,default-trigger = "default-on"; + }; + + sysled4: led4@4 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + compatible = "atmel,at45", "atmel,dataflash"; + reg = <1>; + spi-max-frequency = <25000000>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc4>; + bus-width = <4>; + no-1-8-v; + no-sdio; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + status = "okay"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-supply = <&vgen3_reg>; + phy-handle = <ðphy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + max-speed = <100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-mezz"; + current-speed = <57600>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog-legacy"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <&usb_vbus>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb2_reg>; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5 + MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5 + MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5 + MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5 + >; + }; + + pinctrl_esdhc4: esdhc4grp { + fsl,pins = < + MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5 + MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5 + MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5 + MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5 + MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5 + MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5 + MX51_PAD_NANDF_D0__GPIO4_8 0x100 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x2004 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x2004 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x2004 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x2004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 + MX51_PAD_DISP2_DAT10__FEC_COL 0x0180 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x0180 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x20a4 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x20a4 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 + MX51_PAD_DI_GP3__FEC_TX_ER 0x2004 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x2180 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x0085 + MX51_PAD_DI_GP4__FEC_RDATA2 0x0085 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x0085 + MX51_PAD_DI2_PIN2__FEC_MDC 0x2004 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x01f5 + MX51_PAD_DI2_PIN4__FEC_CRS 0x0180 + MX51_PAD_EIM_A20__GPIO2_14 0x0085 + MX51_PAD_EIM_A21__GPIO2_15 0x00e5 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x85 + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 + >; + }; + + pinctrl_swmdio: swmdiogrp { + fsl,pins = < + MX51_PAD_EIM_D22__GPIO2_6 0x100 + MX51_PAD_EIM_D23__GPIO2_7 0x100 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usb_mmc_reset: usbmmcgrp { + fsl,pins = < + MX51_PAD_CSI1_D9__GPIO3_13 0x85 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts new file mode 100644 index 000000000000..e6ebac8f43e4 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts @@ -0,0 +1,467 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx51.dtsi" + +/ { + model = "ZII SCU3 ESB board"; + compatible = "zii,imx51-scu3-esb", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + /* Will be filled by the bootloader */ + memory@90000000 { + reg = <0x90000000 0>; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_mmc_reset>; + gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; + startup-delay-us = <150000>; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled3: led3@3 { + reg = <3>; + label = "system:red:power"; + linux,default-trigger = "default-on"; + }; + + sysled4: led4@4 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc4>; + bus-width = <4>; + no-1-8-v; + no-sdio; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + fec_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio4>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "port1"; + }; + + port@1 { + reg = <1>; + label = "port2"; + }; + + port@2 { + reg = <2>; + label = "port3"; + }; + + port@3 { + reg = <3>; + label = "scu2scu"; + }; + + port@4 { + reg = <4>; + label = "esb2host"; + }; + + port@5 { + reg = <5>; + label = "esb2mezz"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + phy-mode = "mii"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&ipu { + status = "disabled"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-esb"; + current-speed = <57600>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog-legacy"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <&usb_vbus>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb2_reg>; +}; + +&wdog1 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5 + MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5 + MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5 + MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5 + >; + }; + + pinctrl_esdhc4: esdhc4grp { + fsl,pins = < + MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5 + MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5 + MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5 + MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5 + MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5 + MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5 + MX51_PAD_NANDF_D0__GPIO4_8 0x100 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x2004 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x2004 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x2004 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x2004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 + MX51_PAD_DISP2_DAT10__FEC_COL 0x0180 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x0180 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x20a4 + + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x2180 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x0085 + MX51_PAD_DI_GP4__FEC_RDATA2 0x0085 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x0085 + MX51_PAD_DI2_PIN2__FEC_MDC 0x2004 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x01f5 + MX51_PAD_DI2_PIN4__FEC_CRS 0x0180 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x85 + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 + >; + }; + + pinctrl_switch: switchgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_CK__GPIO4_20 0xc5 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 + MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + MX51_PAD_USBH1_DATA0__UART2_CTS 0x1c5 + MX51_PAD_USBH1_DATA3__UART2_RTS 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usb_mmc_reset: usbmmcgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_RXD__GPIO4_19 0x100 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index fe01b890c715..5c4ba91e43ba 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -93,18 +93,17 @@ }; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; + pmu: pmu { + compatible = "arm,cortex-a8-pmu"; + interrupt-parent = <&tzic>; + interrupts = <77>; + }; - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX5_CLK_USB_PHY_GATE>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + usbphy0: usbphy0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; }; display-subsystem { @@ -250,6 +249,11 @@ }; }; + aipstz1: bridge@73f00000 { + compatible = "fsl,imx51-aipstz"; + reg = <0x73f00000 0x60>; + }; + usbotg: usb@73f80000 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80000 0x0200>; @@ -435,6 +439,11 @@ reg = <0x80000000 0x10000000>; ranges; + aipstz2: bridge@83f00000 { + compatible = "fsl,imx51-aipstz"; + reg = <0x83f00000 0x60>; + }; + iim: iim@83f98000 { compatible = "fsl,imx51-iim", "fsl,imx27-iim"; reg = <0x83f98000 0x4000>; @@ -442,6 +451,11 @@ clocks = <&clks IMX5_CLK_IIM_GATE>; }; + tigerp: tigerp@83fa0000 { + compatible = "fsl,imx51-tigerp"; + reg = <0x83fa0000 0x28>; + }; + owire: owire@83fa4000 { compatible = "fsl,imx51-owire", "fsl,imx21-owire"; reg = <0x83fa4000 0x4000>; @@ -528,6 +542,11 @@ status = "disabled"; }; + m4if: m4if@83fd8000 { + compatible = "fsl,imx51-m4if"; + reg = <0x83fd8000 0x1000>; + }; + weim: weim@83fda000 { #address-cells = <2>; #size-cells = <1>; @@ -588,6 +607,26 @@ clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; + + vpu@83ff4000 { + compatible = "fsl,imx51-vpu", "cnm,codahx4"; + reg = <0x83ff4000 0x1000>; + interrupts = <9>; + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, + <&clks IMX5_CLK_VPU_GATE>; + clock-names = "per", "ahb"; + resets = <&src 1>; + iram = <&iram>; + }; + + sahara: crypto@83ff8000 { + compatible = "fsl,imx53-sahara", "fsl,imx51-sahara"; + reg = <0x83ff8000 0x4000>; + interrupts = <19 20>; + clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, + <&clks IMX5_CLK_SAHARA_IPG_GATE>; + clock-names = "ipg", "ahb"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts new file mode 100644 index 000000000000..0e7f071fd10e --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp-ddc.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-kp.dtsi" + +/ { + model = "K+P imx53 DDC"; + compatible = "kiebackpeter,imx53-ddc", "fsl,imx53"; + + backlight_lcd: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000>; + power-supply = <®_backlight>; + brightness-levels = <0 24 28 32 36 + 40 44 48 52 56 + 60 64 68 72 76 + 80 84 88 92 96 100>; + default-brightness-level = <20>; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp>; + + port@0 { + reg = <0>; + + display1_in: endpoint { + remote-endpoint = <&ipu_di1_disp1>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel: lcd-panel { + compatible = "koe,tx14d24vm1bpa"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_backlight: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "backlight-supply"; + regulator-min-microvolt = <15000000>; + regulator-max-microvolt = <15000000>; + regulator-always-on; + }; +}; + +&fec { + status = "okay"; +}; + +&i2c3 { + adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <2>; + ti,datarate = <4>; + }; + + channel@6 { + reg = <6>; + ti,gain = <2>; + ti,datarate = <4>; + }; + }; + + gpio-expander2@21 { + compatible = "nxp,pcf8574"; + reg = <0x21>; + interrupts = <109>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&iomuxc { + imx53-kp-ddc { + pinctrl_disp: dispgrp { + fsl,pins = < + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x4 + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x4 + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x4 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x4 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x4 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x4 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x4 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x4 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x4 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x4 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x4 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x4 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x4 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x4 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x4 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x4 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x4 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x4 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x4 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x4 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x4 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x4 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x4 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x4 + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x4 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x4 + MX53_PAD_GPIO_1__PWM2_PWMO 0x4 + >; + }; + }; +}; + +&ipu_di1_disp1 { + remote-endpoint = <&display1_in>; +}; + +&pmic { + fsl,mc13xxx-uses-touch; +}; diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/imx53-kp-hsc.dts new file mode 100644 index 000000000000..6e3d71baac0f --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp-hsc.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-kp.dtsi" + +/ { + model = "K+P imx53 HSC"; + compatible = "kiebackpeter,imx53-hsc", "fsl,imx53"; +}; + +&fec { + status = "okay"; + + fixed-link { /* RMII fixed link to LAN9303 */ + speed = <100>; + full-duplex; + }; +}; + +&i2c3 { + switch: switch@a { + compatible = "smsc,lan9303-i2c"; + reg = <0xa>; + reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + reset-duration = <400>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { /* RMII fixed link to master */ + reg = <0>; + label = "cpu"; + ethernet = <&fec>; + }; + + port@1 { /* external port 1 */ + reg = <1>; + label = "lan1"; + }; + + port@2 { /* external port 2 */ + reg = <2>; + label = "lan2"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi new file mode 100644 index 000000000000..8b25416a5303 --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-tqma53.dtsi" +#include <dt-bindings/input/input.h> + +/ { + buzzer { + compatible = "pwm-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buzzer>; + pwms = <&pwm1 0 500000>; + }; + + gpio-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobuttons>; + + button-kalt { + label = "Kaltstart"; + linux,code = <KEY_F6>; + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + }; + + button-pwr { + label = "PowerFailInterrupt"; + linux,code = <KEY_F7>; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-bus { + label = "bus"; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + led-error { + label = "error"; + gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + led-flash { + label = "flash"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + gpio-expander1@22 { + compatible = "nxp,pcf8574"; + reg = <0x22>; + interrupts = <109>; + #gpio-cells = <2>; + gpio-controller; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kp_common>; + + imx53-kp-common { + pinctrl_buzzer: buzzergrp { + fsl,pins = < + MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4 + >; + }; + + pinctrl_gpiobuttons: gpiobuttonsgrp { + fsl,pins = < + MX53_PAD_EIM_RW__GPIO2_26 0x1e4 + MX53_PAD_EIM_D22__GPIO3_22 0x1e4 + >; + }; + + pinctrl_kp_common: kpcommongrp { + fsl,pins = < + MX53_PAD_EIM_CS0__GPIO2_23 0x1e4 + MX53_PAD_GPIO_19__GPIO4_5 0x1e4 + MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4 + MX53_PAD_PATA_DATA7__GPIO2_7 0xe0 + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4 + MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4 + MX53_PAD_EIM_D17__GPIO3_17 0x1e4 + MX53_PAD_EIM_D18__GPIO3_18 0x1e4 + MX53_PAD_EIM_D21__GPIO3_21 0x1e4 + MX53_PAD_EIM_D29__GPIO3_29 0x1e4 + MX53_PAD_EIM_DA11__GPIO3_11 0x1e4 + MX53_PAD_EIM_DA13__GPIO3_13 0x1e4 + MX53_PAD_EIM_DA14__GPIO3_14 0x1e4 + MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4 + MX53_PAD_SD1_CMD__GPIO1_18 0x1e4 + MX53_PAD_SD1_CLK__GPIO1_20 0x1e4 + >; + }; + + pinctrl_leds: ledgrp { + fsl,pins = < + MX53_PAD_EIM_EB2__GPIO2_30 0x1d4 + MX53_PAD_EIM_D28__GPIO3_28 0x1d4 + MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4 + >; + }; + }; +}; + +&pinctrl_uart1 { + fsl,pins = < + MX53_PAD_EIM_D23__GPIO3_23 0x1e4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1e4 + MX53_PAD_EIM_D24__GPIO3_24 0x1e4 + MX53_PAD_EIM_D25__GPIO3_25 0x1e4 + MX53_PAD_EIM_D19__GPIO3_19 0x1e4 + MX53_PAD_EIM_D20__GPIO3_20 0x1e4 + >; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy0 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index 3aa6f693fa9f..cdb90bee7b4a 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -140,6 +140,25 @@ regulator-always-on; }; + reg_3v3: regulator-3v3 { + /* TPS54320 */ + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_3v3_lcd: regulator-3v3-lcd { + /* MIC2009 */ + compatible = "regulator-fixed"; + regulator-name = "LCD_3V3"; + vin-supply = <®_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + pwm_bl: backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; @@ -154,6 +173,7 @@ 234 237 239 242 244 247 249 252 255>; default-brightness-level = <0>; enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3_lcd>; }; leds { @@ -198,8 +218,9 @@ }; }; - usbphy2: usbphy2 { + usbphy2: usbphy-2 { compatible = "usb-nop-xceiv"; + vcc-supply = <®_3v3>; reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; clock-names = "main_clk"; clock-frequency = <24000000>; @@ -208,8 +229,9 @@ assigned-clock-parents = <&clks IMX5_CLK_OSC>; }; - usbphy3: usbphy3 { + usbphy3: usbphy-3 { compatible = "usb-nop-xceiv"; + vcc-supply = <®_3v3>; reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; clock-names = "main_clk"; @@ -221,6 +243,7 @@ panel-lvds0 { compatible = "nvd,9128"; + power-supply = <®_3v3_lcd>; port { panel_in_lvds0: endpoint { @@ -230,6 +253,14 @@ }; }; +&usbphy0 { + vcc-supply = <®_3v3>; +}; + +&usbphy1 { + vcc-supply = <®_3v3>; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -414,6 +445,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; + phy-supply = <®_3v3>; phy-mode = "rmii"; phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; status = "okay"; @@ -562,6 +594,10 @@ }; }; +&pmu { + secure-reg-access; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index ef7658a78836..7423d462d1e4 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -153,7 +153,6 @@ imx53-qsb { pinctrl_hog: hoggrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 MX53_PAD_GPIO_8__GPIO1_8 0x80000000 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 @@ -180,6 +179,12 @@ >; }; + pinctrl_codec: codecgrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 @@ -310,6 +315,8 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec>; #sound-dai-cells = <0>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 1a7a7bb3df45..6386185ae234 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -113,7 +113,7 @@ }; }; - pmu { + pmu: pmu { compatible = "arm,cortex-a8-pmu"; interrupt-parent = <&tzic>; interrupts = <77>; @@ -672,6 +672,11 @@ status = "disabled"; }; + tigerp: tigerp@63fa0000 { + compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp"; + reg = <0x63fa0000 0x28>; + }; + owire: owire@63fa4000 { compatible = "fsl,imx53-owire", "fsl,imx21-owire"; reg = <0x63fa4000 0x4000>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 3dee3af1a4c1..9de45a717356 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -221,9 +221,6 @@ /* Colibri MMC */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc_cd>; - cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts new file mode 100644 index 000000000000..bf53f0552aa1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Engicam S.r.l. + * Copyright (C) 2018 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6dl"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts index 6b2d29138bed..df8607fe4142 100644 --- a/arch/arm/boot/dts/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -6,11 +6,156 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6dl.dtsi" / { model = "BTicino i.MX6DL Mamoj board"; compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; + + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */ + brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>; + default-brightness-level = <7>; + }; + + display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel-lcd { + compatible = "rocktech,rk070er9427"; + backlight = <&backlight_lcd>; + power-supply = <®_lcd_lr>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_lcd_3v3: regulator-lcd-dvdd { + compatible = "regulator-fixed"; + regulator-name = "lcd-dvdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 1 0>; + enable-active-high; + startup-delay-us = <21000>; + }; + + reg_lcd_power: regulator-lcd-power { + compatible = "regulator-fixed"; + regulator-name = "lcd-enable"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 6 0>; + enable-active-high; + vin-supply = <®_lcd_3v3>; + }; + + reg_lcd_vgl: regulator-lcd-vgl { + compatible = "regulator-fixed"; + regulator-name = "lcd-vgl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_power>; + }; + + reg_lcd_vgh: regulator-lcd-vgh { + compatible = "regulator-fixed"; + regulator-name = "lcd-vgh"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_avdd>; + }; + + reg_lcd_vcom: regulator-lcd-vcom { + compatible = "regulator-fixed"; + regulator-name = "lcd-vcom"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>; + startup-delay-us = <11000>; + enable-active-high; + vin-supply = <®_lcd_vgh>; + }; + + reg_lcd_lr: regulator-lcd-lr { + compatible = "regulator-fixed"; + regulator-name = "lcd-lr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_lcd_vcom>; + }; + + reg_lcd_avdd: regulator-lcd-avdd { + compatible = "regulator-fixed"; + regulator-name = "lcd-avdd"; + regulator-min-microvolt = <10280000>; + regulator-max-microvolt = <10280000>; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_vgl>; + }; + + reg_usb_host: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbhost-vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhost>; + regulator-min-microvolt = <50000000>; + regulator-max-microvolt = <50000000>; + gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wl18xx_vmmc: regulator-wl18xx-vmcc { + compatible = "regulator-fixed"; + regulator-name = "vwl1807"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &fec { @@ -147,12 +292,56 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; +&usbh1 { + vbus-supply = <®_usb_host>; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + vmmc-supply = <®_wl18xx_vmmc>; + no-1-8-v; + non-removable; + wakeup-source; + keep-power-in-suspend; + cap-power-off-card; + max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -200,6 +389,59 @@ >; }; + pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */ + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */ + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 /* VDOUT_HSYNC */ + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 /* VDOUT_VSYNC */ + MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10 /* VDOUT_RESET */ + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x40013058 /* EN_LCD33V */ + MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x4001b0b0 /* EN_AVDD */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x40013058 /* ENVGH */ + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x40013058 /* ENVGL */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x40013058 /* LCD_POWER */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x40013058 /* EN_VCOM_LCD */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x40013058 /* LCD_L_R */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x40013058 /* LCD_U_D */ + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 @@ -207,6 +449,23 @@ >; }; + pinctrl_usbhost: usbhostgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10079 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -221,4 +480,10 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x4001b0b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts index 30ce2c0cec2b..61fa30991d67 100644 --- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index ec53d7a09572..ef58d3b0ea0d 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 2e98c92adff7..dd3226fe5ecd 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -19,36 +19,8 @@ reg = <0x10000000 0x40000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; + chosen { + stdout-path = "serial1:115200n8"; }; leds { @@ -82,6 +54,28 @@ mux-int-port = <1>; mux-ext-port = <3>; }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; }; &audmux { diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index b384913c34dd..f0607eb41df4 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -33,6 +33,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -50,6 +51,29 @@ device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index aa0e631f3c0a..707ac9a46115 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -62,6 +62,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -109,6 +113,7 @@ */ compatible = "edt,et057090dhu"; backlight = <&backlight>; + power-supply = <®_3v3_sw>; port { lcd_panel_in: endpoint { @@ -127,19 +132,30 @@ enable-active-high; status = "okay"; }; + + reg_3v3_sw: regulator-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &backlight { brightness-levels = <0 127 191 223 239 247 251 255>; default-brightness-level = <1>; + power-supply = <®_3v3_sw>; status = "okay"; }; &can1 { + xceiver-supply = <®_3v3_sw>; status = "okay"; }; &can2 { + xceiver-supply = <®_3v3_sw>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index e8dccf552122..4e1c8feaef82 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -63,6 +63,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 6831dfd24cc1..469e3d0e2827 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -62,6 +62,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 65ef4cacbc71..18ae4f3be6e3 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -187,6 +187,72 @@ >; }; +&cpu1 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu2 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu3 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + &ecspi1 { cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts index acd3d33476d4..95b2efda17b4 100644 --- a/arch/arm/boot/dts/imx6q-icore-mipi.dts +++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts @@ -20,6 +20,14 @@ status = "okay"; }; +&mipi_csi { + status = "okay"; +}; + +&ov5640 { + status = "okay"; +}; + &usdhc3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts index 2a3c44f98eed..03bec0c53063 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts index c5d59baa1a07..eb4eecb6ed22 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index df8ff397a914..435445a34ad0 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index f2368a073d07..c54362fcc508 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -177,6 +177,7 @@ touchscreen-size-y = <480>; touchscreen-inverted-x; touchscreen-inverted-y; + wakeup-source; }; rtc@68 { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 77f8f030dd07..0193ee6fe964 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -38,6 +38,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -50,25 +51,106 @@ soc-supply = <®_soc>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 64fbee61de44..05f07ea3e8c8 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -61,25 +61,17 @@ status = "disabled"; }; - reg_1p8v: regulator-1p8v { + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; - reg_3p3v: regulator-3p3v { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "3P3V"; + regulator-name = "+V3.3_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -297,7 +289,7 @@ vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -322,8 +314,9 @@ compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; + VDDA-supply = <®_module_3v3_audio>; + VDDIO-supply = <®_module_3v3>; + VDDD-supply = <&vgen4_reg>; }; /* STMPE811 touch screen controller */ @@ -455,9 +448,10 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + disable-wp; + no-1-8-v; status = "disabled"; }; @@ -465,9 +459,10 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <4>; - voltage-ranges = <3300 3300>; + disable-wp; + no-1-8-v; status = "disabled"; }; @@ -475,9 +470,9 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + no-1-8-v; non-removable; status = "okay"; }; @@ -952,38 +947,4 @@ MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 >; }; - - pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 76035db96f67..87e15e7cb32b 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -56,25 +56,17 @@ status = "disabled"; }; - reg_1p8v: regulator-1p8v { + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; - reg_3p3v: regulator-3p3v { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "3P3V"; + regulator-name = "+V3.3_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -227,7 +219,7 @@ vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -252,8 +244,9 @@ compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; + VDDA-supply = <®_module_3v3_audio>; + VDDIO-supply = <®_module_3v3>; + VDDD-supply = <&vgen4_reg>; lrclk-strength = <3>; }; @@ -385,10 +378,12 @@ /* Colibri MMC */ &usdhc1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - vqmmc-supply = <®_3p3v>; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ + disable-wp; + vqmmc-supply = <®_module_3v3>; bus-width = <4>; - voltage-ranges = <3300 3300>; + no-1-8-v; status = "disabled"; }; @@ -396,9 +391,9 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + no-1-8-v; non-removable; status = "okay"; }; @@ -479,8 +474,7 @@ pinctrl_gpio_keys: gpiokeys { fsl,pins = < - /* Power button */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 >; }; @@ -567,7 +561,7 @@ pinctrl_mmc_cd: gpiommccd { fsl,pins = < - MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1 >; }; @@ -698,40 +692,6 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 - >; - }; - pinctrl_weim_cs0: weimcs0grp { fsl,pins = < /* nEXT_CS0 */ diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 0a1574998fc6..9ce993776160 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -65,8 +65,7 @@ regulator-always-on; }; - - reg_2p5v: regulator-3p3v { + reg_2p5v: regulator-2p5v { compatible = "regulator-fixed"; regulator-name = "2P5V"; regulator-min-microvolt = <2500000>; @@ -215,6 +214,29 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <®_1p8v>; + AVDD-supply = <®_3p3v>; + DVDD-supply = <®_3p3v>; + powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; + status = "disabled"; + + port { + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + sgtl5000: codec@a { #sound-dai-cells = <0>; compatible = "fsl,sgtl5000"; @@ -226,6 +248,20 @@ }; }; +&mipi_csi { + status = "disabled"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; @@ -353,7 +389,14 @@ fsl,pins = < MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index aab088f318e8..29baf25ae5d0 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -292,6 +256,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; rtc@6f { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 87ca6ead4098..39200e5dc896 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -442,6 +406,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index f5b763d39285..572abd7499b1 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -360,6 +324,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 596866b0a0d2..98384a6c5d12 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -370,6 +334,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 0e28e36ddbb2..9f11f1fcc3e6 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -6,6 +6,10 @@ #include <dt-bindings/gpio/gpio.h> / { + chosen { + stdout-path = &uart4; + }; + memory@10000000 { reg = <0x10000000 0x80000000>; }; @@ -155,6 +159,27 @@ gpio-controller; #gpio-cells = <2>; }; + + light-sensor@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + interrupt-parent = <&gpio5>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + }; + + magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + }; + + accelerometer@1c { + compatible = "fsl,mma8451"; + reg = <0x1c>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 15744ad52535..6e46a195b399 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -341,6 +341,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index e1afa54404d0..381bf61fcd28 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -8,30 +8,6 @@ #include <dt-bindings/gpio/gpio.h> / { - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - sound { compatible = "fsl,imx6-wandboard-sgtl5000", "fsl,imx-audio-sgtl5000"; @@ -52,6 +28,32 @@ spdif-controller = <&spdif>; spdif-out; }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgvbus>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; }; &audmux { @@ -174,6 +176,12 @@ >; }; + pinctrl_usbotgvbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 @@ -248,10 +256,11 @@ }; &usbotg { + vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "peripheral"; + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index f14df0baf2ab..7fff3717cf7c 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -320,10 +320,36 @@ rave-sp { compatible = "zii,rave-sp-rdu2"; current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; watchdog { compatible = "zii,rave-sp-watchdog"; }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; }; }; @@ -569,14 +595,14 @@ rmi4-f11@11 { reg = <0x11>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; rmi4-f12@12 { reg = <0x12>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 911141e24681..61d2d26afbf4 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -922,7 +922,6 @@ crypto: caam@2100000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <4>; #address-cells = <1>; #size-cells = <1>; reg = <0x2100000 0x10000>; diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts index a39b86036581..741d1ed338ca 100644 --- a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts index 011726c836cd..1593ac86b2a4 100644 --- a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts +++ b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2017 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 92ad01f676e3..679b4482ab13 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -12,6 +12,10 @@ model = "Freescale i.MX6 SoloLite EVK Board"; compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + chosen { + stdout-path = &uart1; + }; + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -73,6 +77,8 @@ reg_lcd_3v3: regulator-lcd-3v3 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; regulator-name = "lcd-3v3"; gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; enable-active-high; @@ -195,6 +201,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { @@ -406,6 +413,12 @@ >; }; + pinctrl_reg_lcd_3v3: reglcd3v3grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 994e48dc1df0..7a4f5dace902 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -60,6 +60,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>, <&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>, <&clks IMX6SL_CLK_PLL1_SYS>; @@ -523,8 +524,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -553,8 +554,8 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2850000>; + regulator-min-microvolt = <2250000>; + regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; @@ -680,10 +681,36 @@ #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; - pu-supply = <®_pu>; - clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, - <&clks IMX6SL_CLK_GPU2D_PODF>; - #power-domain-cells = <1>; + clocks = <&clks IMX6SL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, + <&clks IMX6SL_CLK_GPU2D_PODF>; + }; + + pd_disp: power-domain@2 { + reg = <2>; + #power-domain-cells = <0>; + clocks = <&clks IMX6SL_CLK_LCDIF_AXI>, + <&clks IMX6SL_CLK_LCDIF_PIX>, + <&clks IMX6SL_CLK_EPDC_AXI>, + <&clks IMX6SL_CLK_EPDC_PIX>, + <&clks IMX6SL_CLK_PXP_AXI>; + }; + }; }; gpr: iomuxc-gpr@20e0000 { @@ -738,6 +765,7 @@ <&clks IMX6SL_CLK_DUMMY>; clock-names = "pix", "axi", "disp_axi"; status = "disabled"; + power-domains = <&pd_disp>; }; dcp: dcp@20fc000 { @@ -921,5 +949,25 @@ status = "disabled"; }; }; + + gpu_2d: gpu@2200000 { + compatible = "vivante,gc"; + reg = <0x02200000 0x4000>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_MMDC_ROOT>, + <&clks IMX6SL_CLK_GPU2D_OVG>; + clock-names = "bus", "core"; + power-domains = <&pd_pu>; + }; + + gpu_vg: gpu@2204000 { + compatible = "vivante,gc"; + reg = <0x02204000 0x4000>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_MMDC_ROOT>, + <&clks IMX6SL_CLK_GPU2D_OVG>; + clock-names = "bus", "core"; + power-domains = <&pd_pu>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts new file mode 100644 index 000000000000..c8e115564ba2 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sll.dtsi" + +/ { + model = "Freescale i.MX6SLL EVK Board"; + compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x80000000>; + }; + + backlight_display: backlight-display { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2_vbus>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_aud3v: regulator-aud3v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator-aud4v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sd1_vmmc>; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sd3_vmmc: regulator-sd3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sd3_vmmc>; + regulator-name = "SD3_WIFI"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <®_sd3_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_reg_sd3_vmmc: sd3vmmcgrp { + fsl,pins = < + MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 + >; + }; + + pinctrl_usb_otg1_vbus: vbus1grp { + fsl,pins = < + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 + >; + }; + + pinctrl_usb_otg2_vbus: vbus2grp { + fsl,pins = < + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 + >; + }; + + pinctrl_reg_lcd_3v3: reglcd3v3grp { + fsl,pins = < + MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 + >; + }; + + pinctrl_reg_sd1_vmmc: sd1vmmcgrp { + fsl,pins = < + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17061 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13061 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17061 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17061 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17061 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17061 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170a1 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130a1 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170a1 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170a1 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170a1 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170a1 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170e9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170e9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170e9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170e9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170e9 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 + MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79 + MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79 + MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79 + MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79 + MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79 + MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79 + MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79 + MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79 + MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79 + MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79 + MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; + + pinctrl_pwm1: pmw1grp { + fsl,pins = < + MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/imx6sll-pinfunc.h new file mode 100644 index 000000000000..713a346f4c89 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-pinfunc.h @@ -0,0 +1,880 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +#ifndef __DTS_IMX6SLL_PINFUNC_H +#define __DTS_IMX6SLL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6SLL_PAD_WDOG_B__WDOG1_B 0x0014 0x02DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x0014 0x02DC 0x0000 0x1 0x0 +#define MX6SLL_PAD_WDOG_B__UART5_RI_B 0x0014 0x02DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_WDOG_B__GPIO3_IO18 0x0014 0x02DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x0018 0x02E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x0018 0x02E0 0x068C 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT 0x0018 0x02E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID 0x0018 0x02E0 0x0560 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x0018 0x02E0 0x05AC 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x0018 0x02E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__SD3_WP 0x0018 0x02E0 0x0794 0x6 0x0 +#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x001C 0x02E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x001C 0x02E4 0x0690 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT 0x001C 0x02E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID 0x001C 0x02E4 0x055C 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL 0x001C 0x02E4 0x0000 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x001C 0x02E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B 0x001C 0x02E4 0x0780 0x6 0x0 +#define MX6SLL_PAD_PWM1__PWM1_OUT 0x0020 0x02E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_PWM1__CCM_CLKO 0x0020 0x02E8 0x0000 0x1 0x0 +#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT 0x0020 0x02E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_PWM1__CSI_MCLK 0x0020 0x02E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_PWM1__GPIO3_IO23 0x0020 0x02E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_PWM1__EPIT1_OUT 0x0020 0x02E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL0__KEY_COL0 0x0024 0x02EC 0x06A0 0x0 0x0 +#define MX6SLL_PAD_KEY_COL0__I2C2_SCL 0x0024 0x02EC 0x0684 0x1 0x0 +#define MX6SLL_PAD_KEY_COL0__LCD_DATA00 0x0024 0x02EC 0x06D8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL0__SD1_CD_B 0x0024 0x02EC 0x0770 0x4 0x1 +#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24 0x0024 0x02EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0 0x0028 0x02F0 0x06C0 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA 0x0028 0x02F0 0x0688 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01 0x0028 0x02F0 0x06DC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW0__SD1_WP 0x0028 0x02F0 0x0774 0x4 0x1 +#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25 0x0028 0x02F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL1__KEY_COL1 0x002C 0x02F4 0x06A4 0x0 0x0 +#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI 0x002C 0x02F4 0x0658 0x1 0x1 +#define MX6SLL_PAD_KEY_COL1__LCD_DATA02 0x002C 0x02F4 0x06E0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL1__SD3_DATA4 0x002C 0x02F4 0x0784 0x4 0x0 +#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26 0x002C 0x02F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1 0x0030 0x02F8 0x06C4 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO 0x0030 0x02F8 0x0654 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03 0x0030 0x02F8 0x06E4 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD 0x0030 0x02F8 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5 0x0030 0x02F8 0x0788 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x0030 0x02F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL2__KEY_COL2 0x0034 0x02FC 0x06A8 0x0 0x0 +#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0 0x0034 0x02FC 0x065C 0x1 0x1 +#define MX6SLL_PAD_KEY_COL2__LCD_DATA04 0x0034 0x02FC 0x06E8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL2__CSI_DATA12 0x0034 0x02FC 0x05B8 0x3 0x1 +#define MX6SLL_PAD_KEY_COL2__SD3_DATA6 0x0034 0x02FC 0x078C 0x4 0x0 +#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x0034 0x02FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2 0x0038 0x0300 0x06C8 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK 0x0038 0x0300 0x0650 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05 0x0038 0x0300 0x06EC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13 0x0038 0x0300 0x05BC 0x3 0x1 +#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7 0x0038 0x0300 0x0790 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29 0x0038 0x0300 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__KEY_COL3 0x003C 0x0304 0x06AC 0x0 0x0 +#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS 0x003C 0x0304 0x05A0 0x1 0x1 +#define MX6SLL_PAD_KEY_COL3__LCD_DATA06 0x003C 0x0304 0x06F0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL3__CSI_DATA14 0x003C 0x0304 0x05C0 0x3 0x1 +#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x003C 0x0304 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__SD1_RESET 0x003C 0x0304 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3 0x0040 0x0308 0x06CC 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC 0x0040 0x0308 0x059C 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07 0x0040 0x0308 0x06F4 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15 0x0040 0x0308 0x05C4 0x3 0x2 +#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31 0x0040 0x0308 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT 0x0040 0x0308 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL4__KEY_COL4 0x0044 0x030C 0x06B0 0x0 0x1 +#define MX6SLL_PAD_KEY_COL4__AUD6_RXD 0x0044 0x030C 0x0594 0x1 0x1 +#define MX6SLL_PAD_KEY_COL4__LCD_DATA08 0x0044 0x030C 0x06F8 0x2 0x1 +#define MX6SLL_PAD_KEY_COL4__CSI_DATA16 0x0044 0x030C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x0044 0x030C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR 0x0044 0x030C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4 0x0048 0x0310 0x06D0 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC 0x0048 0x0310 0x05A4 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09 0x0048 0x0310 0x06FC 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17 0x0048 0x0310 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01 0x0048 0x0310 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC 0x0048 0x0310 0x076C 0x6 0x2 +#define MX6SLL_PAD_KEY_COL5__KEY_COL5 0x004C 0x0314 0x0694 0x0 0x1 +#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS 0x004C 0x0314 0x05A8 0x1 0x1 +#define MX6SLL_PAD_KEY_COL5__LCD_DATA10 0x004C 0x0314 0x0700 0x2 0x0 +#define MX6SLL_PAD_KEY_COL5__CSI_DATA18 0x004C 0x0314 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x004C 0x0314 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR 0x004C 0x0314 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5 0x0050 0x0318 0x06B4 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD 0x0050 0x0318 0x0598 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11 0x0050 0x0318 0x0704 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19 0x0050 0x0318 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x0050 0x0318 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC 0x0050 0x0318 0x0768 0x6 0x3 +#define MX6SLL_PAD_KEY_COL6__KEY_COL6 0x0054 0x031C 0x0698 0x0 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x0054 0x031C 0x075C 0x1 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX 0x0054 0x031C 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL6__LCD_DATA12 0x0054 0x031C 0x0708 0x2 0x1 +#define MX6SLL_PAD_KEY_COL6__CSI_DATA20 0x0054 0x031C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x0054 0x031C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL6__SD3_RESET 0x0054 0x031C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6 0x0058 0x0320 0x06B8 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x0058 0x0320 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX 0x0058 0x0320 0x075C 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13 0x0058 0x0320 0x070C 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21 0x0058 0x0320 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x0058 0x0320 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT 0x0058 0x0320 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL7__KEY_COL7 0x005C 0x0324 0x069C 0x0 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS 0x005C 0x0324 0x0758 0x1 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS 0x005C 0x0324 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL7__LCD_DATA14 0x005C 0x0324 0x0710 0x2 0x1 +#define MX6SLL_PAD_KEY_COL7__CSI_DATA22 0x005C 0x0324 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06 0x005C 0x0324 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL7__SD1_WP 0x005C 0x0324 0x0774 0x6 0x3 +#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7 0x0060 0x0328 0x06BC 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS 0x0060 0x0328 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS 0x0060 0x0328 0x0758 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15 0x0060 0x0328 0x0714 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23 0x0060 0x0328 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x0060 0x0328 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B 0x0060 0x0328 0x0770 0x6 0x3 +#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x0064 0x032C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI 0x0064 0x032C 0x0658 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24 0x0064 0x032C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00 0x0064 0x032C 0x05C8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07 0x0064 0x032C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x0068 0x0330 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO 0x0068 0x0330 0x0654 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25 0x0068 0x0330 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01 0x0068 0x0330 0x05CC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08 0x0068 0x0330 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x006C 0x0334 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0 0x006C 0x0334 0x065C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26 0x006C 0x0334 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x006C 0x0334 0x05D0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09 0x006C 0x0334 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x0070 0x0338 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK 0x0070 0x0338 0x0650 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27 0x0070 0x0338 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x0070 0x0338 0x05D4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10 0x0070 0x0338 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x0074 0x033C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1 0x0074 0x033C 0x0660 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28 0x0074 0x033C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x0074 0x033C 0x05D8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11 0x0074 0x033C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x0078 0x0340 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2 0x0078 0x0340 0x0664 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29 0x0078 0x0340 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x0078 0x0340 0x05DC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12 0x0078 0x0340 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x007C 0x0344 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3 0x007C 0x0344 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30 0x007C 0x0344 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x007C 0x0344 0x05E0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13 0x007C 0x0344 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x0080 0x0348 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY 0x0080 0x0348 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31 0x0080 0x0348 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x0080 0x0348 0x05E4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14 0x0080 0x0348 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x0084 0x034C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI 0x0084 0x034C 0x063C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0 0x0084 0x034C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15 0x0084 0x034C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x0088 0x0350 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO 0x0088 0x0350 0x0638 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1 0x0088 0x0350 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16 0x0088 0x0350 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x008C 0x0354 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0 0x008C 0x0354 0x0648 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2 0x008C 0x0354 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17 0x008C 0x0354 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x0090 0x0358 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK 0x0090 0x0358 0x0630 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3 0x0090 0x0358 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18 0x0090 0x0358 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x0094 0x035C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX 0x0094 0x035C 0x074C 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX 0x0094 0x035C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM 0x0094 0x035C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19 0x0094 0x035C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1 0x0094 0x035C 0x064C 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x0098 0x0360 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX 0x0098 0x0360 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX 0x0098 0x0360 0x074C 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ 0x0098 0x0360 0x0668 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20 0x0098 0x0360 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2 0x0098 0x0360 0x0640 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x009C 0x0364 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS 0x009C 0x0364 0x0748 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS 0x009C 0x0364 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT 0x009C 0x0364 0x066C 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21 0x009C 0x0364 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3 0x009C 0x0364 0x0644 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x00A0 0x0368 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS 0x00A0 0x0368 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS 0x00A0 0x0368 0x0748 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE 0x00A0 0x0368 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22 0x00A0 0x0368 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY 0x00A0 0x0368 0x0634 0x6 0x1 +#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x00A4 0x036C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x00A4 0x036C 0x0624 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL 0x00A4 0x036C 0x0684 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x00A4 0x036C 0x05E8 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23 0x00A4 0x036C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x00A8 0x0370 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO 0x00A8 0x0370 0x0620 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA 0x00A8 0x0370 0x0688 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x00A8 0x0370 0x05EC 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24 0x00A8 0x0370 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x00AC 0x0374 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0 0x00AC 0x0374 0x0628 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10 0x00AC 0x0374 0x05B0 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x00AC 0x0374 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x00B0 0x0378 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x00B0 0x0378 0x061C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x00B0 0x0378 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11 0x00B0 0x0378 0x05B4 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x00B0 0x0378 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x00B4 0x037C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x00B4 0x037C 0x062C 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT 0x00B4 0x037C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27 0x00B4 0x037C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x00B8 0x0380 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B 0x00B8 0x0380 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT 0x00B8 0x0380 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28 0x00B8 0x0380 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x00BC 0x0384 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL 0x00BC 0x0384 0x068C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT 0x00BC 0x0384 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29 0x00BC 0x0384 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x00C0 0x0388 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA 0x00C0 0x0388 0x0690 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT 0x00C0 0x0388 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30 0x00C0 0x0388 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x00C4 0x038C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x00C4 0x038C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x00C4 0x038C 0x05F4 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31 0x00C4 0x038C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET 0x00C4 0x038C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x00C8 0x0390 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3 0x00C8 0x0390 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x00C8 0x0390 0x05F0 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00 0x00C8 0x0390 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT 0x00C8 0x0390 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x00CC 0x0394 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY 0x00CC 0x0394 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x00CC 0x0394 0x0000 0x3 0x0 +#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01 0x00CC 0x0394 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDRL__SD2_WP 0x00CC 0x0394 0x077C 0x6 0x2 +#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x00D0 0x0398 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT 0x00D0 0x0398 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x00D0 0x0398 0x05F8 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02 0x00D0 0x0398 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B 0x00D0 0x0398 0x0778 0x6 0x2 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x00D4 0x039C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS 0x00D4 0x039C 0x0588 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX 0x00D4 0x039C 0x0754 0x2 0x4 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX 0x00D4 0x039C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x00D4 0x039C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x00D4 0x039C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x00D8 0x03A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD 0x00D8 0x03A0 0x057C 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX 0x00D8 0x03A0 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX 0x00D8 0x03A0 0x0754 0x2 0x5 +#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x00D8 0x03A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x00D8 0x03A0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0 0x00DC 0x03A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS 0x00DC 0x03A4 0x0750 0x2 0x2 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS 0x00DC 0x03A4 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05 0x00DC 0x03A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7 0x00DC 0x03A4 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1 0x00E0 0x03A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS 0x00E0 0x03A8 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS 0x00E0 0x03A8 0x0750 0x2 0x3 +#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06 0x00E0 0x03A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8 0x00E0 0x03A8 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0 0x00E4 0x03AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC 0x00E4 0x03AC 0x0584 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16 0x00E4 0x03AC 0x0718 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x00E4 0x03AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1 0x00E8 0x03B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS 0x00E8 0x03B0 0x0590 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17 0x00E8 0x03B0 0x071C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x00E8 0x03B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2 0x00EC 0x03B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD 0x00EC 0x03B4 0x0580 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18 0x00EC 0x03B4 0x0720 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 0x00EC 0x03B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3 0x00F0 0x03B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC 0x00F0 0x03B8 0x058C 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19 0x00F0 0x03B8 0x0724 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x00F0 0x03B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00F4 0x03BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20 0x00F4 0x03BC 0x0728 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x00F4 0x03BC 0x055C 0x4 0x4 +#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11 0x00F4 0x03BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET 0x00F4 0x03BC 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ 0x00F8 0x03C0 0x0668 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21 0x00F8 0x03C0 0x072C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID 0x00F8 0x03C0 0x0560 0x4 0x3 +#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x00F8 0x03C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT 0x00F8 0x03C0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00FC 0x03C4 0x066C 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22 0x00FC 0x03C4 0x0730 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI 0x00FC 0x03C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x00FC 0x03C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP 0x00FC 0x03C4 0x0794 0x6 0x2 +#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE 0x0100 0x03C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23 0x0100 0x03C8 0x0734 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO 0x0100 0x03C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x0100 0x03C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B 0x0100 0x03C8 0x0780 0x6 0x2 +#define MX6SLL_PAD_LCD_CLK__LCD_CLK 0x0104 0x03CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN 0x0104 0x03CC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_CLK__PWM4_OUT 0x0104 0x03CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x0104 0x03CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x0108 0x03D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E 0x0108 0x03D0 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x0108 0x03D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x010C 0x03D4 0x06D4 0x0 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_CS 0x010C 0x03D4 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX 0x010C 0x03D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX 0x010C 0x03D4 0x074C 0x4 0x1 +#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x010C 0x03D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x010C 0x03D4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x0110 0x03D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_RS 0x0110 0x03D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS 0x0110 0x03D8 0x0748 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS 0x0110 0x03D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x0110 0x03D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x0110 0x03D8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_RESET 0x0114 0x03DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_BUSY 0x0114 0x03DC 0x06D4 0x2 0x1 +#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS 0x0114 0x03DC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS 0x0114 0x03DC 0x0748 0x4 0x1 +#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x0114 0x03DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY 0x0114 0x03DC 0x05AC 0x6 0x2 +#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x0118 0x03E0 0x06D8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI 0x0118 0x03E0 0x0608 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID 0x0118 0x03E0 0x0560 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03E0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B 0x0118 0x03E0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x0118 0x03E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00 0x0118 0x03E0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00 0x0118 0x03E0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x011C 0x03E4 0x06DC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO 0x011C 0x03E4 0x0604 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID 0x011C 0x03E4 0x055C 0x2 0x3 +#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT 0x011C 0x03E4 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS 0x011C 0x03E4 0x0570 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x011C 0x03E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01 0x011C 0x03E4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01 0x011C 0x03E4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x0120 0x03E8 0x06E0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0 0x0120 0x03E8 0x0614 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT 0x0120 0x03E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03E8 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC 0x0120 0x03E8 0x056C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x0120 0x03E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02 0x0120 0x03E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02 0x0120 0x03E8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x0124 0x03EC 0x06E4 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK 0x0124 0x03EC 0x05FC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B 0x0124 0x03EC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03EC 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD 0x0124 0x03EC 0x0564 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x0124 0x03EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03 0x0124 0x03EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03 0x0124 0x03EC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x0128 0x03F0 0x06E8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1 0x0128 0x03F0 0x060C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC 0x0128 0x03F0 0x05F8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB 0x0128 0x03F0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC 0x0128 0x03F0 0x0574 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x0128 0x03F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04 0x0128 0x03F0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04 0x0128 0x03F0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x012C 0x03F4 0x06EC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2 0x012C 0x03F4 0x0610 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC 0x012C 0x03F4 0x05F0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS 0x012C 0x03F4 0x0578 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x012C 0x03F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05 0x012C 0x03F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05 0x012C 0x03F4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x0130 0x03F8 0x06F0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3 0x0130 0x03F8 0x0618 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK 0x0130 0x03F8 0x05F4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD 0x0130 0x03F8 0x0568 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x0130 0x03F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06 0x0130 0x03F8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06 0x0130 0x03F8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x0134 0x03FC 0x06F4 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY 0x0134 0x03FC 0x0600 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK 0x0134 0x03FC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT 0x0134 0x03FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x0134 0x03FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07 0x0134 0x03FC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07 0x0134 0x03FC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x0138 0x0400 0x06F8 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA08__KEY_COL0 0x0138 0x0400 0x06A0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09 0x0138 0x0400 0x05EC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK 0x0138 0x0400 0x061C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x0138 0x0400 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08 0x0138 0x0400 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08 0x0138 0x0400 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x013C 0x0404 0x06FC 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0 0x013C 0x0404 0x06C0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08 0x013C 0x0404 0x05E8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI 0x013C 0x0404 0x0624 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x013C 0x0404 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09 0x013C 0x0404 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09 0x013C 0x0404 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x0140 0x0408 0x0700 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA10__KEY_COL1 0x0140 0x0408 0x06A4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07 0x0140 0x0408 0x05E4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO 0x0140 0x0408 0x0620 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x0140 0x0408 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10 0x0140 0x0408 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x0140 0x0408 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x0144 0x040C 0x0704 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1 0x0144 0x040C 0x06C4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06 0x0144 0x040C 0x05E0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1 0x0144 0x040C 0x062C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x0144 0x040C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11 0x0144 0x040C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x0144 0x040C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x0148 0x0410 0x0708 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA12__KEY_COL2 0x0148 0x0410 0x06A8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05 0x0148 0x0410 0x05DC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS 0x0148 0x0410 0x0760 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS 0x0148 0x0410 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x0148 0x0410 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12 0x0148 0x0410 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x0148 0x0410 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x014C 0x0414 0x070C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2 0x014C 0x0414 0x06C8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04 0x014C 0x0414 0x05D8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS 0x014C 0x0414 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS 0x014C 0x0414 0x0760 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x014C 0x0414 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13 0x014C 0x0414 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x014C 0x0414 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x0150 0x0418 0x0710 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA14__KEY_COL3 0x0150 0x0418 0x06AC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03 0x0150 0x0418 0x05D4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX 0x0150 0x0418 0x0764 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX 0x0150 0x0418 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x0150 0x0418 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14 0x0150 0x0418 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0150 0x0418 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x0154 0x041C 0x0714 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3 0x0154 0x041C 0x06CC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02 0x0154 0x041C 0x05D0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX 0x0154 0x041C 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX 0x0154 0x041C 0x0764 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x0154 0x041C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15 0x0154 0x041C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0154 0x041C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x0158 0x0420 0x0718 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA16__KEY_COL4 0x0158 0x0420 0x06B0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x0420 0x05CC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL 0x0158 0x0420 0x0684 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x0158 0x0420 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24 0x0158 0x0420 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x015C 0x0424 0x071C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4 0x015C 0x0424 0x06D0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00 0x015C 0x0424 0x05C8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA 0x015C 0x0424 0x0688 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x015C 0x0424 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25 0x015C 0x0424 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x0160 0x0428 0x0720 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA18__KEY_COL5 0x0160 0x0428 0x0694 0x1 0x2 +#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15 0x0160 0x0428 0x05C4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1 0x0160 0x0428 0x0670 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x0160 0x0428 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26 0x0160 0x0428 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x0164 0x042C 0x0724 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5 0x0164 0x042C 0x06B4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14 0x0164 0x042C 0x05C0 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2 0x0164 0x042C 0x0674 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x0164 0x042C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27 0x0164 0x042C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x0168 0x0430 0x0728 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA20__KEY_COL6 0x0168 0x0430 0x0698 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13 0x0168 0x0430 0x05BC 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1 0x0168 0x0430 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x0168 0x0430 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28 0x0168 0x0430 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x016C 0x0434 0x072C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6 0x016C 0x0434 0x06B8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12 0x016C 0x0434 0x05B8 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2 0x016C 0x0434 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x016C 0x0434 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29 0x016C 0x0434 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x0170 0x0438 0x0730 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA22__KEY_COL7 0x0170 0x0438 0x069C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11 0x0170 0x0438 0x05B4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3 0x0170 0x0438 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x0170 0x0438 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30 0x0170 0x0438 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x0174 0x043C 0x0734 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7 0x0174 0x043C 0x06BC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10 0x0174 0x043C 0x05B0 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN 0x0174 0x043C 0x0678 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x0174 0x043C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31 0x0174 0x043C 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS 0x0178 0x0440 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL 0x0178 0x0440 0x067C 0x1 0x1 +#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX 0x0178 0x0440 0x0754 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX 0x0178 0x0440 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x0178 0x0440 0x068C 0x4 0x1 +#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00 0x0178 0x0440 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0 0x0178 0x0440 0x0648 0x6 0x0 +#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND 0x0178 0x0440 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXC__AUD3_RXC 0x017C 0x0444 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXC__I2C1_SDA 0x017C 0x0444 0x0680 0x1 0x1 +#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX 0x017C 0x0444 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX 0x017C 0x0444 0x0754 0x2 0x1 +#define MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x017C 0x0444 0x0690 0x4 0x1 +#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01 0x017C 0x0444 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1 0x017C 0x0444 0x064C 0x6 0x0 +#define MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x0180 0x0448 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI 0x0180 0x0448 0x063C 0x1 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX 0x0180 0x0448 0x075C 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX 0x0180 0x0448 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__SD1_LCTL 0x0180 0x0448 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02 0x0180 0x0448 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x0184 0x044C 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO 0x0184 0x044C 0x0638 0x1 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX 0x0184 0x044C 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX 0x0184 0x044C 0x075C 0x2 0x1 +#define MX6SLL_PAD_AUD_TXC__SD2_LCTL 0x0184 0x044C 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03 0x0184 0x044C 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x0188 0x0450 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT 0x0188 0x0450 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS 0x0188 0x0450 0x0758 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS 0x0188 0x0450 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL 0x0188 0x0450 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04 0x0188 0x0450 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x018C 0x0454 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK 0x018C 0x0454 0x0630 0x1 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS 0x018C 0x0454 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS 0x018C 0x0454 0x0758 0x2 0x1 +#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05 0x018C 0x0454 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x0190 0x0458 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT 0x0190 0x0458 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY 0x0190 0x0458 0x0634 0x2 0x0 +#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x0190 0x0458 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06 0x0190 0x0458 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x0190 0x0458 0x073C 0x6 0x1 +#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x0194 0x045C 0x0744 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX 0x0194 0x045C 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__PWM1_OUT 0x0194 0x045C 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX 0x0194 0x045C 0x075C 0x2 0x4 +#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX 0x0194 0x045C 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX 0x0194 0x045C 0x0764 0x4 0x6 +#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX 0x0194 0x045C 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16 0x0194 0x045C 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x0198 0x0460 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX 0x0198 0x0460 0x0744 0x0 0x1 +#define MX6SLL_PAD_UART1_TXD__PWM2_OUT 0x0198 0x0460 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX 0x0198 0x0460 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX 0x0198 0x0460 0x075C 0x2 0x5 +#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX 0x0198 0x0460 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX 0x0198 0x0460 0x0764 0x4 0x7 +#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17 0x0198 0x0460 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B 0x0198 0x0460 0x0000 0x7 0x0 +#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x019C 0x0464 0x067C 0x0 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS 0x019C 0x0464 0x0740 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS 0x019C 0x0464 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2 0x019C 0x0464 0x0640 0x2 0x0 +#define MX6SLL_PAD_I2C1_SCL__SD3_RESET 0x019C 0x0464 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12 0x019C 0x0464 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1 0x019C 0x0464 0x060C 0x6 0x0 +#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x01A0 0x0468 0x0680 0x0 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS 0x01A0 0x0468 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS 0x01A0 0x0468 0x0740 0x1 0x1 +#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3 0x01A0 0x0468 0x0644 0x2 0x0 +#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT 0x01A0 0x0468 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13 0x01A0 0x0468 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2 0x01A0 0x0468 0x0610 0x6 0x0 +#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x01A4 0x046C 0x0684 0x0 0x3 +#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS 0x01A4 0x046C 0x0570 0x1 0x2 +#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN 0x01A4 0x046C 0x0738 0x2 0x2 +#define MX6SLL_PAD_I2C2_SCL__SD3_WP 0x01A4 0x046C 0x0794 0x4 0x3 +#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14 0x01A4 0x046C 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY 0x01A4 0x046C 0x0600 0x6 0x1 +#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x01A8 0x0470 0x0688 0x0 0x3 +#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC 0x01A8 0x0470 0x056C 0x1 0x2 +#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT 0x01A8 0x0470 0x0000 0x2 0x0 +#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B 0x01A8 0x0470 0x0780 0x4 0x3 +#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15 0x01A8 0x0470 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x01AC 0x0474 0x05FC 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD 0x01AC 0x0474 0x0568 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x01AC 0x0474 0x0764 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x01AC 0x0474 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x01AC 0x0474 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET 0x01AC 0x0474 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x01AC 0x0474 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x01AC 0x0474 0x0768 0x6 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x01B0 0x0478 0x0608 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC 0x01B0 0x0478 0x0574 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x01B0 0x0478 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x01B0 0x0478 0x0764 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x01B0 0x0478 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x01B0 0x0478 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x01B0 0x0478 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x01B4 0x047C 0x0604 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS 0x01B4 0x047C 0x0578 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x01B4 0x047C 0x0760 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x01B4 0x047C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0 0x01B4 0x047C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP 0x01B4 0x047C 0x077C 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10 0x01B4 0x047C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x01B8 0x0480 0x0614 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD 0x01B8 0x0480 0x0564 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x01B8 0x0480 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x01B8 0x0480 0x0760 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1 0x01B8 0x0480 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B 0x01B8 0x0480 0x0778 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11 0x01B8 0x0480 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x01B8 0x0480 0x0000 0x6 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x01BC 0x0484 0x061C 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x01BC 0x0484 0x073C 0x1 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX 0x01BC 0x0484 0x0754 0x2 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX 0x01BC 0x0484 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x01BC 0x0484 0x05F4 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET 0x01BC 0x0484 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x01BC 0x0484 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x01BC 0x0484 0x0768 0x6 0x2 +#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x01C0 0x0488 0x0624 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x01C0 0x0488 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX 0x01C0 0x0488 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX 0x01C0 0x0488 0x0754 0x2 0x3 +#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x01C0 0x0488 0x05F0 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x01C0 0x0488 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x01C0 0x0488 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x01C4 0x048C 0x0620 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x01C4 0x048C 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS 0x01C4 0x048C 0x0750 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS 0x01C4 0x048C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK 0x01C4 0x048C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP 0x01C4 0x048C 0x0774 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x01C4 0x048C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x01C4 0x048C 0x076C 0x6 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x01C8 0x0490 0x0628 0x0 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x01C8 0x0490 0x0618 0x1 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS 0x01C8 0x0490 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS 0x01C8 0x0490 0x0750 0x2 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC 0x01C8 0x0490 0x05F8 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B 0x01C8 0x0490 0x0770 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x01C8 0x0490 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x01C8 0x0490 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD1_CLK__SD1_CLK 0x01CC 0x0494 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CLK__KEY_COL0 0x01CC 0x0494 0x06A0 0x2 0x2 +#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4 0x01CC 0x0494 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x01CC 0x0494 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_CMD__SD1_CMD 0x01D0 0x0498 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CMD__KEY_ROW0 0x01D0 0x0498 0x06C0 0x2 0x2 +#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5 0x01D0 0x0498 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14 0x01D0 0x0498 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x01D4 0x049C 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA0__KEY_COL1 0x01D4 0x049C 0x06A4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6 0x01D4 0x049C 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x01D4 0x049C 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x01D8 0x04A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1 0x01D8 0x04A0 0x06C4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7 0x01D8 0x04A0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x01D8 0x04A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x01DC 0x04A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA2__KEY_COL2 0x01DC 0x04A4 0x06A8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8 0x01DC 0x04A4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x01DC 0x04A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x01E0 0x04A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2 0x01E0 0x04A8 0x06C8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9 0x01E0 0x04A8 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x01E0 0x04A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x01E4 0x04AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA4__KEY_COL3 0x01E4 0x04AC 0x06AC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N 0x01E4 0x04AC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX 0x01E4 0x04AC 0x075C 0x4 0x6 +#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX 0x01E4 0x04AC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x01E4 0x04AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x01E8 0x04B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3 0x01E8 0x04B0 0x06CC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED 0x01E8 0x04B0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX 0x01E8 0x04B0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX 0x01E8 0x04B0 0x075C 0x4 0x7 +#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09 0x01E8 0x04B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x01EC 0x04B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA6__KEY_COL4 0x01EC 0x04B4 0x06B0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ 0x01EC 0x04B4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS 0x01EC 0x04B4 0x0758 0x4 0x4 +#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS 0x01EC 0x04B4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x01EC 0x04B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x01F0 0x04B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4 0x01F0 0x04B8 0x06D0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY 0x01F0 0x04B8 0x05AC 0x3 0x3 +#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS 0x01F0 0x04B8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS 0x01F0 0x04B8 0x0758 0x4 0x5 +#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10 0x01F0 0x04B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_RESET__SD2_RESET 0x01F4 0x04BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_RESET__WDOG2_B 0x01F4 0x04BC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT 0x01F4 0x04BC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD2_RESET__CSI_MCLK 0x01F4 0x04BC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x01F4 0x04BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CLK__SD2_CLK 0x01F8 0x04C0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS 0x01F8 0x04C0 0x0570 0x1 0x1 +#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK 0x01F8 0x04C0 0x0630 0x2 0x1 +#define MX6SLL_PAD_SD2_CLK__CSI_DATA00 0x01F8 0x04C0 0x05C8 0x3 0x1 +#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x01F8 0x04C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CMD__SD2_CMD 0x01FC 0x04C4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CMD__AUD4_RXC 0x01FC 0x04C4 0x056C 0x1 0x1 +#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0 0x01FC 0x04C4 0x0648 0x2 0x1 +#define MX6SLL_PAD_SD2_CMD__CSI_DATA01 0x01FC 0x04C4 0x05CC 0x3 0x1 +#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT 0x01FC 0x04C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x01FC 0x04C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x0200 0x04C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD 0x0200 0x04C8 0x0564 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI 0x0200 0x04C8 0x063C 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02 0x0200 0x04C8 0x05D0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS 0x0200 0x04C8 0x0760 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS 0x0200 0x04C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x0200 0x04C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x0204 0x04CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC 0x0204 0x04CC 0x0574 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO 0x0204 0x04CC 0x0638 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03 0x0204 0x04CC 0x05D4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS 0x0204 0x04CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS 0x0204 0x04CC 0x0760 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x0204 0x04CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x0208 0x04D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS 0x0208 0x04D0 0x0578 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04 0x0208 0x04D0 0x05D8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX 0x0208 0x04D0 0x0764 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX 0x0208 0x04D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x0208 0x04D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x020C 0x04D4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD 0x020C 0x04D4 0x0568 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05 0x020C 0x04D4 0x05DC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX 0x020C 0x04D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX 0x020C 0x04D4 0x0764 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x020C 0x04D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x0210 0x04D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4 0x0210 0x04D8 0x0784 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX 0x0210 0x04D8 0x074C 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX 0x0210 0x04D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06 0x0210 0x04D8 0x05E0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x0210 0x04D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02 0x0210 0x04D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x0214 0x04DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5 0x0214 0x04DC 0x0788 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX 0x0214 0x04DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX 0x0214 0x04DC 0x074C 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07 0x0214 0x04DC 0x05E4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN 0x0214 0x04DC 0x0738 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31 0x0214 0x04DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x0218 0x04E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6 0x0218 0x04E0 0x078C 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS 0x0218 0x04E0 0x0748 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS 0x0218 0x04E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08 0x0218 0x04E0 0x05E8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA6__SD2_WP 0x0218 0x04E0 0x077C 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x0218 0x04E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x021C 0x04E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7 0x021C 0x04E4 0x0790 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS 0x021C 0x04E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS 0x021C 0x04E4 0x0748 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09 0x021C 0x04E4 0x05EC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B 0x021C 0x04E4 0x0778 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x021C 0x04E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__SD3_CLK 0x0220 0x04E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS 0x0220 0x04E8 0x0588 0x1 0x0 +#define MX6SLL_PAD_SD3_CLK__KEY_COL5 0x0220 0x04E8 0x0694 0x2 0x0 +#define MX6SLL_PAD_SD3_CLK__CSI_DATA10 0x0220 0x04E8 0x05B0 0x3 0x0 +#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x0220 0x04E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x0220 0x04E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR 0x0220 0x04E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_CMD__SD3_CMD 0x0224 0x04EC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CMD__AUD5_RXC 0x0224 0x04EC 0x0584 0x1 0x0 +#define MX6SLL_PAD_SD3_CMD__KEY_ROW5 0x0224 0x04EC 0x06B4 0x2 0x0 +#define MX6SLL_PAD_SD3_CMD__CSI_DATA11 0x0224 0x04EC 0x05B4 0x3 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID 0x0224 0x04EC 0x0560 0x4 0x1 +#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x0224 0x04EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR 0x0224 0x04EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x0228 0x04F0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD 0x0228 0x04F0 0x057C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA0__KEY_COL6 0x0228 0x04F0 0x0698 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12 0x0228 0x04F0 0x05B8 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID 0x0228 0x04F0 0x055C 0x4 0x1 +#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x0228 0x04F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x022C 0x04F4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC 0x022C 0x04F4 0x058C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6 0x022C 0x04F4 0x06B8 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13 0x022C 0x04F4 0x05BC 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT 0x022C 0x04F4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x022C 0x04F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B 0x022C 0x04F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x0230 0x04F8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS 0x0230 0x04F8 0x0590 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA2__KEY_COL7 0x0230 0x04F8 0x069C 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14 0x0230 0x04F8 0x05C0 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT 0x0230 0x04F8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x0230 0x04F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC 0x0230 0x04F8 0x0768 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x0234 0x04FC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD 0x0234 0x04FC 0x0580 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7 0x0234 0x04FC 0x06BC 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15 0x0234 0x04FC 0x05C4 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT 0x0234 0x04FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x0234 0x04FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC 0x0234 0x04FC 0x076C 0x6 0x0 +#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE 0x0238 0x0500 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS 0x0238 0x0500 0x05A0 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0 0x0238 0x0500 0x065C 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1 0x0238 0x0500 0x0670 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x0238 0x0500 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x023C 0x0504 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC 0x023C 0x0504 0x059C 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK 0x023C 0x0504 0x0650 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2 0x023C 0x0504 0x0674 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x023C 0x0504 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE 0x0240 0x0508 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD 0x0240 0x0508 0x0594 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI 0x0240 0x0508 0x0658 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1 0x0240 0x0508 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x0240 0x0508 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC 0x0244 0x050C 0x05A4 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO 0x0244 0x050C 0x0654 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2 0x0244 0x050C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x0244 0x050C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS 0x0248 0x0510 0x05A8 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1 0x0248 0x0510 0x0660 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3 0x0248 0x0510 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18 0x0248 0x0510 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD 0x024C 0x0514 0x0598 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2 0x024C 0x0514 0x0664 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN 0x024C 0x0514 0x0678 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x024C 0x0514 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT 0x0250 0x0518 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET 0x0250 0x0518 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET 0x0250 0x0518 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x0250 0x0518 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID 0x0254 0x051C 0x055C 0x2 0x2 +#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT 0x0254 0x051C 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT 0x0254 0x051C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x0254 0x051C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN 0x0258 0x0520 0x0738 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD1_WP 0x0258 0x0520 0x0774 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD3_WP 0x0258 0x0520 0x0794 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x0258 0x0520 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT 0x025C 0x0524 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B 0x025C 0x0524 0x0770 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B 0x025C 0x0524 0x0780 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16 0x025C 0x0524 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B 0x0260 0x0528 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT 0x0260 0x0528 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY 0x0260 0x0528 0x05AC 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x0260 0x0528 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK 0x0260 0x0528 0x073C 0x6 0x0 + +#endif /* __DTS_IMX6SLL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi new file mode 100644 index 000000000000..000e6136a9d6 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -0,0 +1,780 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +#include <dt-bindings/clock/imx6sll-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx6sll-pinfunc.h" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi3 = &ecspi3; + spi4 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1075000 + 198000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6SLL_CLK_ARM>, + <&clks IMX6SLL_CLK_PLL2_PFD2>, + <&clks IMX6SLL_CLK_STEP>, + <&clks IMX6SLL_CLK_PLL1_SW>, + <&clks IMX6SLL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + }; + }; + + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + + ckil: clock-ckil { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock-ipp-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock-ipp-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + + tempmon: temperature-sensor { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + ocram: sram@900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + }; + + L2: l2-cache@a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + aips1: aips-bus@2000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba: spba-bus@2000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@2004000 { + compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>, + <&clks IMX6SLL_CLK_OSC>, + <&clks IMX6SLL_CLK_SPDIF>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_IPG>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: spi@2008000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI1>, + <&clks IMX6SLL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: spi@200c000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI2>, + <&clks IMX6SLL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: spi@2010000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI3>, + <&clks IMX6SLL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: spi@2014000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI4>, + <&clks IMX6SLL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@2018000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART4_IPG>, + <&clks IMX6SLL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@2020000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART1_IPG>, + <&clks IMX6SLL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@2024000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02024000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART2_IPG>, + <&clks IMX6SLL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ssi1: ssi-controller@2028000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 37 22 0>, <&sdma 38 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI1_IPG>, + <&clks IMX6SLL_CLK_SSI1>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi2: ssi-controller@202c000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 41 22 0>, <&sdma 42 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI2_IPG>, + <&clks IMX6SLL_CLK_SSI2>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi3: ssi-controller@2030000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 45 22 0>, <&sdma 46 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI3_IPG>, + <&clks IMX6SLL_CLK_SSI3>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + uart3: serial@2034000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02034000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-name = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART3_IPG>, + <&clks IMX6SLL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + pwm1: pwm@2080000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM1>, + <&clks IMX6SLL_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@2084000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM2>, + <&clks IMX6SLL_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@2088000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM3>, + <&clks IMX6SLL_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@208c000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM4>, + <&clks IMX6SLL_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + gpt1: timer@2098000 { + compatible = "fsl,imx6sl-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPT_BUS>, + <&clks IMX6SLL_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@209c000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@20a0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@20a4000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@20a8000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@20ac000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@20b0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: keypad@20b8000 { + compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_KPP>; + status = "disabled"; + }; + + wdog1: watchdog@20bc000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG1>; + }; + + wdog2: watchdog@20c0000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: clock-controller@20c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + + assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>; + assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>; + }; + + anatop: anatop@20c8000 { + compatible = "fsl,imx6sll-anatop", + "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x4000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p0: regulator-3p0@20c8120 { + compatible = "fsl,anatop-regulator"; + reg = <0x20c8120>; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + }; + + usbphy1: usb-phy@20c9000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usb-phy@20ca000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY2>; + phy-reg_3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@20cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x61>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + src: reset-controller@20d8000 { + compatible = "fsl,imx6sll-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: interrupt-controller@20dc000 { + compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>; + }; + + iomuxc: pinctrl@20e0000 { + compatible = "fsl,imx6sll-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@20e4000 { + compatible = "fsl,imx6sll-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + csi: csi@20e8000 { + compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi"; + reg = <0x020e8000 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_CSI>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "disp-axi", "csi_mclk", "disp_dcic"; + status = "disabled"; + }; + + sdma: dma-controller@20ec000 { + compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_SDMA>, + <&clks IMX6SLL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + iram = <&ocram>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + + lcdif: lcd-controller@20f8000 { + compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; + reg = <0x020f8000 0x4000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>, + <&clks IMX6SLL_CLK_LCDIF_APB>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + dcp: dcp@20fc000 { + compatible = "fsl,imx28-dcp"; + reg = <0x020fc000 0x4000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DCP>; + clock-names = "dcp"; + }; + }; + + aips2: aips-bus@2100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@2184000 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbotg2: usb@2184200 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbmisc: usbmisc@2184800 { + #index-cells = <1>; + compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc", + "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + }; + + usdhc1: mmc@2190000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc2: mmc@2194000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc3: mmc@2198000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + i2c1: i2c@21a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@21a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@21a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C3>; + status = "disabled"; + }; + + mmdc: memory-controller@21b0000 { + compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + ocotp: ocotp-ctrl@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sll-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SLL_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; + }; + + audmux: audmux@21d8000 { + compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + uart5: serial@21f4000 { + compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART5_IPG>, + <&clks IMX6SLL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 59e52f504922..adb5cc7d8ce2 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -47,11 +11,6 @@ model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board"; compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx"; - aliases { - fb-lcd = &lcdif1; - t-lcd = &t_lcd; - }; - memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -261,38 +220,6 @@ status = "okay"; }; -&lcdif1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif1>; - lcd-supply = <®_3p3v>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&t_lcd>; - t_lcd: t_lcd_default { - clock-frequency = <74160000>; - hactive = <1280>; - vactive = <720>; - hback-porch = <220>; - hfront-porch = <110>; - vback-porch = <20>; - vfront-porch = <5>; - hsync-len = <40>; - vsync-len = <5>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -524,40 +451,6 @@ >; }; - pinctrl_lcdif1: lcdif1grp { - fsl,pins = < - MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 - MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 - MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 - MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 - MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 - MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 - MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 - MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 - MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 - MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 - MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 - MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 - MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 - MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 - MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 - MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 - MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 - MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 - MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 - MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 - MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 - MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 - MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 - MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 - MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 - MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 - MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 - >; - }; - pinctrl_pcie: pciegrp { fsl,pins = < MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0 diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index e3533e74ccc8..9cc6ff206aea 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -63,6 +63,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 4e4a55aad5c9..844caa39364f 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -79,6 +79,7 @@ 198000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6SX_CLK_ARM>, <&clks IMX6SX_CLK_PLL2_PFD2>, <&clks IMX6SX_CLK_STEP>, @@ -165,6 +166,12 @@ interrupt-parent = <&gpc>; ranges; + ocram_s: sram@8f8000 { + compatible = "mmio-sram"; + reg = <0x008f8000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCRAM_S>; + }; + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; @@ -591,8 +598,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -621,8 +628,8 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2875000>; + regulator-min-microvolt = <2250000>; + regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; @@ -814,7 +821,6 @@ crypto: caam@2100000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <4>; #address-cells = <1>; #size-cells = <1>; reg = <0x2100000 0x10000>; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts new file mode 100644 index 000000000000..3792679c0c90 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore6UL SBC Express board device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6ul.dtsi" +#include "imx6ul-ccimx6ulsom.dtsi" + +/ { + model = "Digi International ConnectCore 6UL SBC Express."; + compatible = "digi,ccimx6ulsbcexpress", "digi,ccimx6ulsom", + "fsl,imx6ul"; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <&ext_3v3>; + status = "okay"; +}; + +&ecspi3 { + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3_master>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <0>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + broken-cd; /* no carrier detect line (use polling) */ + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + /* GPIO1_4/ADC1_IN4 (pin 7 of the expansion header) */ + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_ecspi3_master: ecspi3grp1 { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 /* Chip Select */ + >; + }; + + pinctrl_ecspi3_slave: ecspi3grp2 { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x10b0 /* Chip Select */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x1b020 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x10b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10071 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + /* General purpose pinctrl */ + pinctrl_hog: hoggrp { + fsl,pins = < + /* GPIOs BANK 3 */ + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0xf030 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi new file mode 100644 index 000000000000..c71a84da1af0 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore 6UL System-On-Module device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x4000000>; + linux,cma-default; + }; + }; +}; + +&adc1 { + vref-supply = <&vdda_adc_3v3>; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pfuze3000: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + int_3v3: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <6250>; + regulator-boot-on; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_arm_soc_in: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-ramp-delay = <6250>; + regulator-boot-on; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <925000>; + }; + }; + + ext_3v3: sw2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr3: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1300000>; + }; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vdd_snvs_3v3: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vdda_adc_3v3: vldo1 { + compatible = "regulator-fixed"; + regulator-name = "vref-adc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo2_ext: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vdda_wlan: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_high_in: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_int: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4_ext: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vcoin_chg: vcoin { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_gpmi_nand: gpmigrp { + fsl,pins = < + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; +}; + +®_arm { + vin-supply = <&vdd_arm_soc_in>; + regulator-allow-bypass; +}; + +®_soc { + vin-supply = <&vdd_arm_soc_in>; + regulator-allow-bypass; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 47682b8c023c..0c09420f9951 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -51,8 +51,9 @@ model = "Technexion Pico i.MX6UL Board"; compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul"; + /* Will be filled by the bootloader */ memory@80000000 { - reg = <0x80000000 0x10000000>; + reg = <0x80000000 0>; }; chosen { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 47a3453a4211..6dc0b569acdf 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -62,6 +62,7 @@ device_type = "cpu"; reg = <0>; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; operating-points = < /* kHz uV */ 696000 1275000 @@ -433,6 +434,7 @@ reg = <0x0209c000 0x4000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO1>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -446,6 +448,7 @@ reg = <0x020a0000 0x4000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -458,6 +461,7 @@ reg = <0x020a4000 0x4000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -470,6 +474,7 @@ reg = <0x020a8000 0x4000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -482,6 +487,7 @@ reg = <0x020ac000 0x4000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO5>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 3dffbcd50bf6..183193e8580d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -20,20 +20,6 @@ &cpu0 { clock-frequency = <792000000>; - operating-points = < - /* kHz uV */ - 792000 1225000 - 528000 1175000 - 396000 1025000 - 198000 950000 - >; - fsl,soc-operating-points = < - /* KHz uV */ - 792000 1175000 - 528000 1175000 - 396000 1175000 - 198000 1175000 - >; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index ebc25c98e5e1..cd1776a7015a 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -1,43 +1,6 @@ -/* - * Copyright 2016 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2016 Freescale Semiconductor, Inc. #include "imx6ul.dtsi" #include "imx6ull-pinfunc.h" @@ -48,6 +11,25 @@ /* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ /delete-node/ &crypto; +&cpu0 { + operating-points = < + /* kHz uV */ + 900000 1275000 + 792000 1225000 + 528000 1175000 + 396000 1025000 + 198000 950000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 900000 1175000 + 792000 1175000 + 528000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; + / { soc { aips3: aips-bus@2200000 { diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 70c53e50b2fc..d8aac4a2d02a 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -48,11 +11,6 @@ model = "Boundary Devices i.MX7 Nitrogen7 Board"; compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d"; - aliases { - fb-lcd = &lcdif; - t-lcd = &t_lcd; - }; - memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -65,7 +23,7 @@ default-on; }; - backlight-j20 { + backlight_lcd: backlight-j20 { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -73,6 +31,17 @@ status = "okay"; }; + panel-lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -317,35 +286,11 @@ }; &lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat - &pinctrl_lcdif_ctrl>; - lcd-supply = <®_vref_3v3>; - display = <&display0>; status = "okay"; - display0: lcd-display { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&t_lcd>; - t_lcd: t_lcd_default { - /* default to Okaya display */ - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <48>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 940849163104..c9b3c60b0eb2 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -10,6 +10,10 @@ model = "Freescale i.MX7 SabreSD Board"; compatible = "fsl,imx7d-sdb", "fsl,imx7d"; + chosen { + stdout-path = &uart1; + }; + memory@80000000 { reg = <0x80000000 0x80000000>; }; @@ -71,14 +75,6 @@ enable-active-high; }; - reg_can2_3v3: regulator-can2-3v3 { - compatible = "regulator-fixed"; - regulator-name = "can2-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - reg_vref_1v8: regulator-vref-1v8 { compatible = "regulator-fixed"; regulator-name = "vref-1v8"; @@ -116,10 +112,17 @@ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + panel { compatible = "innolux,at043tn24"; - pinctrl-0 = <&pinctrl_backlight>; - enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; power-supply = <®_lcd_3v3>; port { @@ -712,6 +715,12 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < @@ -719,9 +728,9 @@ >; }; - pinctrl_backlight: backlightgrp { + pinctrl_pwm1: pwm1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x110b0 + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30 >; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 8d3d123d0a5c..7cbc2ffa4b3a 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -11,6 +11,7 @@ cpu0: cpu@0 { clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu1: cpu@1 { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 9ced589bfa96..a052198f6e96 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -842,7 +842,6 @@ crypto: caam@30900000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <8>; #address-cells = <1>; #size-cells = <1>; reg = <0x30900000 0x40000>; diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index 66954aaf2c47..5cae74eb6cdd 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi index 476273b3f994..0e99df218252 100644 --- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index a17311c602aa..1db17ec744b1 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -225,3 +225,23 @@ netcp: netcp@24000000 { }; }; }; + +sa_subsys: subsys@24080000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x24080000 0x40000>; + + sa_config: subsys@0 { + compatible = "syscon"; + reg = <0x0 0x100>; + }; + + rng@24000 { + compatible = "ti,keystone-rng"; + reg = <0x24000 0x1000>; + ti,syscon-sa-cfg = <&sa_config>; + clocks = <&clksa>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 154fdd7a7022..b7f10bf94576 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -37,6 +37,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 { + compatible = "regulator-fixed"; + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; &k2g_pinctrl { @@ -128,6 +136,30 @@ K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE1) /* qspicsn3.dcan1rx */ >; }; + + emac_pins: pinmux_emac_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD1.RGMII_RXD1 */ + K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD2.RGMII_RXD2 */ + K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD3.RGMII_RXD3 */ + K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD0.RGMII_RXD0 */ + K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD0.RGMII_TXD0 */ + K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD1.RGMII_TXD1 */ + K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD2.RGMII_TXD2 */ + K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD3.RGMII_TXD3 */ + K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXCLK.RGMII_TXC */ + K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXEN.RGMII_TXCTL */ + K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXCLK.RGMII_RXC */ + K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXDV.RGMII_RXCTL */ + >; + }; + + mdio_pins: pinmux_mdio_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_CLK.MDIO_CLK */ + K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */ + >; + }; }; &uart0 { @@ -144,6 +176,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&vcc3v3_dcin_reg>; + vqmmc-supply = <&vcc3v3_dcin_reg>; cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -152,6 +185,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */ + vqmmc-supply = <&vcc1v8_ldo1_reg>; ti,non-removable; status = "okay"; }; @@ -294,3 +328,32 @@ pinctrl-0 = <&dcan1_pins>; status = "okay"; }; + +&qmss { + status = "okay"; +}; + +&knav_dmas { + status = "okay"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&gbe0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&netcp { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts index d820ed2474bb..2a2d38cf0fff 100644 --- a/arch/arm/boot/dts/keystone-k2g-ice.dts +++ b/arch/arm/boot/dts/keystone-k2g-ice.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "keystone-k2g.dtsi" +#include <dt-bindings/net/ti-dp83867.h> / { compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone"; @@ -281,6 +282,30 @@ K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn1.gpio0_102 */ >; }; + + emac_pins: pinmux_emac_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD1.RGMII_RXD1 */ + K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD2.RGMII_RXD2 */ + K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD3.RGMII_RXD3 */ + K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD0.RGMII_RXD0 */ + K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD0.RGMII_TXD0 */ + K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD1.RGMII_TXD1 */ + K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD2.RGMII_TXD2 */ + K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD3.RGMII_TXD3 */ + K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXCLK.RGMII_TXC */ + K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXEN.RGMII_TXCTL */ + K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXCLK.RGMII_RXC */ + K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXDV.RGMII_RXCTL */ + >; + }; + + mdio_pins: pinmux_mdio_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_CLK.MDIO_CLK */ + K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */ + >; + }; }; &uart0 { @@ -386,3 +411,37 @@ vcc-supply = <&vdd_3v3>; }; }; + +&qmss { + status = "okay"; +}; + +&knav_dmas { + status = "okay"; +}; + +&netcp { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins>; + status = "okay"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + ethphy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&gbe0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi new file mode 100644 index 000000000000..d0e6a9a43402 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for K2G Netcp driver + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +qmss: qmss@4020000 { + compatible = "ti,66ak2g-navss-qm"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k2g_pds 0x0018>; + clocks = <&k2g_clks 0x0018 0>; + clock-names = "nss_vclk"; + ranges; + queue-range = <0 0x80>; + linkram0 = <0x4020000 0x7ff>; + status = "disabled"; + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x80>; + reg = <0x4100000 0x800>, + <0x4040000 0x100>, + <0x4080000 0x800>, + <0x40c0000 0x800>; + reg-names = "peek", "config", + "region", "push"; + }; + + }; + queue-pools { + qpend { + qpend-0 { + qrange = <77 8>; + interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04 + 0 311 0xf04 0 312 0xf04 0 313 0xf04 + 0 314 0xf04 0 315 0xf04>; + qalloc-by-id; + }; + }; + general-purpose { + gp-0 { + qrange = <112 8>; + }; + netcp-tx { + qrange = <5 8>; + qalloc-by-id; + }; + }; + }; + + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <1023 128>; /* num_desc desc_size */ + link-index = <0x400>; + }; + }; +}; /* qmss */ + +knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + power-domains = <&k2g_pds 0x0018>; + clocks = <&k2g_clks 0x0018 0>; + clock-names = "nss_vclk"; + ranges; + ti,navigator-cloud-address = <0x40c0000 0x40c0000 0x40c0000 0x40c0000>; + + dma_gbe: dma_gbe@0 { + reg = <0x4010000 0x100>, + <0x4011000 0x2a0>, /* 21 Tx channels */ + <0x4012000 0x400>, /* 32 Rx channels */ + <0x4010100 0x80>, + <0x4013000 0x400>; /* 32 Rx flows */ + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; + +}; + +netcp: netcp@4000000 { + reg = <0x2620110 0x8>; + reg-names = "efuse"; + compatible = "ti,netcp-1.0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + power-domains = <&k2g_pds 0x0018>; + clocks = <&k2g_clks 0x0018 3>, <&k2g_clks 0x0018 8>; + clock-names = "ethss_clk", "cpts"; + + /* NetCP address range */ + ranges = <0 0x4000000 0x1000000>; + + dma-coherent; + + ti,navigator-dmas = <&dma_gbe 0>, <&dma_gbe 5>; + ti,navigator-dma-names = "netrx0", "nettx"; + + netcp-devices { + #address-cells = <1>; + #size-cells = <1>; + ranges; + gbe: gbe@200000 { + label = "netcp-gbe"; + compatible = "ti,netcp-gbe-2"; + reg = <0x200000 0x20>, <0x220000 0x20000>; + enable-ale; + tx-queue = <5>; + tx-channel = "nettx"; + cpts-rftclk-sel = <0>; + cpts-ext-ts-inputs = <8>; + + interfaces { + gbe0: interface-0 { + slave-port = <0>; + link-interface = <5>; + }; + }; + }; + }; + + netcp-interfaces { + interface-0 { + rx-channel = "netrx0"; + rx-pool = <512 12>; + tx-pool = <511 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <77>; + tx-completion-queue = <78>; + efuse-mac = <1>; + netcp-gbe = <&gbe0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index da78c0034427..738b44cf2b0b 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -391,13 +391,10 @@ }; mmc0: mmc@23000000 { - compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; + compatible = "ti,k2g-sdhci"; reg = <0x23000000 0x400>; interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>; - dmas = <&edma1 24 0>, <&edma1 25 0>; - dma-names = "tx", "rx"; bus-width = <4>; - ti,needs-special-reset; no-1-8-v; max-frequency = <96000000>; power-domains = <&k2g_pds 0xb>; @@ -407,13 +404,12 @@ }; mmc1: mmc@23100000 { - compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; + compatible = "ti,k2g-sdhci"; reg = <0x23100000 0x400>; interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>; - dmas = <&edma1 26 0>, <&edma1 27 0>; - dma-names = "tx", "rx"; bus-width = <8>; - ti,needs-special-reset; + no-1-8-v; + non-removable; max-frequency = <96000000>; power-domains = <&k2g_pds 0xc>; clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>; @@ -609,5 +605,18 @@ reg = <0x21010000 0x200>; interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>; }; + + mdio: mdio@4200f00 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + reg = <0x04200f00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k2g_clks 0x0018 3>; + clock-names = "fck"; + power-domains = <&k2g_pds 0x0018>; + status = "disabled"; + bus_freq = <2500000>; + }; + #include "keystone-k2g-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index b88c0689c285..e203145acbea 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -228,3 +228,23 @@ netcp: netcp@2000000 { }; }; }; + +sa_subsys: subsys@20c0000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x20c0000 0x40000>; + + sa_config: subsys@0 { + compatible = "syscon"; + reg = <0x0 0x100>; + }; + + rng@24000 { + compatible = "ti,keystone-rng"; + reg = <0x24000 0x1000>; + ti,syscon-sa-cfg = <&sa_config>; + clocks = <&clksa>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index 9ec84228bc16..a2e47bad3307 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -208,3 +208,23 @@ netcp: netcp@26000000 { }; }; }; + +sa_subsys: subsys@26080000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x26080000 0x40000>; + + sa_config: subsys@0 { + compatible = "syscon"; + reg = <0x0 0x100>; + }; + + rng@24000 { + compatible = "ti,keystone-rng"; + reg = <0x24000 0x1000>; + ti,syscon-sa-cfg = <&sa_config>; + clocks = <&clksa>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 3bb28c03ca74..ac343330d0c8 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -142,7 +142,7 @@ compatible = "ti,wl1273"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */ + interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 2 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 234afd6d60ec..9d5d53fbe9c0 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -48,7 +48,7 @@ compatible = "ti,wl1283"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + interrupts = <24 IRQ_TYPE_EDGE_RISING>; /* gpio 152 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index c55d479971cc..f18490548c78 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -84,6 +84,7 @@ device_type = "cpu"; reg = <0xf01>; clocks = <&clockgen 1 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index d1eb123bc73b..1cdc346a05e8 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -92,6 +92,7 @@ <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; clock-frequency = <1300000000>; }; @@ -103,6 +104,7 @@ <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; clock-frequency = <1300000000>; }; @@ -114,6 +116,7 @@ <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; clock-frequency = <1300000000>; }; }; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 531d905d924f..2b760f90f38c 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -91,19 +91,19 @@ blue { label = "bpi-r2:pio:blue"; - gpios = <&pio 241 GPIO_ACTIVE_HIGH>; + gpios = <&pio 240 GPIO_ACTIVE_LOW>; default-state = "off"; }; green { label = "bpi-r2:pio:green"; - gpios = <&pio 240 GPIO_ACTIVE_HIGH>; + gpios = <&pio 241 GPIO_ACTIVE_LOW>; default-state = "off"; }; red { label = "bpi-r2:pio:red"; - gpios = <&pio 239 GPIO_ACTIVE_HIGH>; + gpios = <&pio 239 GPIO_ACTIVE_LOW>; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts deleted file mode 100644 index 96ff3c9068ae..000000000000 --- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2017 MediaTek Inc. - * Author: John Crispin <john@phrozen.org> - * - */ - -/dts-v1/; -#include "mt7623n-rfb.dtsi" - -/ { - model = "MediaTek MT7623N NAND reference board"; - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623"; -}; - -&bch { - status = "okay"; -}; - -&nandc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_default>; - - nand@0 { - reg = <0>; - spare_per_sector = <64>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <12>; - nand-ecc-step-size = <1024>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "preloader"; - reg = <0x0 0x40000>; - }; - - partition@40000 { - label = "uboot"; - reg = <0x40000 0x80000>; - }; - - partition@c0000 { - label = "uboot-env"; - reg = <0xC0000 0x40000>; - }; - - partition@140000 { - label = "bootimg"; - reg = <0x140000 0x2000000>; - }; - - partition@2140000 { - label = "recovery"; - reg = <0x2140000 0x2000000>; - }; - - partition@4140000 { - label = "rootfs"; - reg = <0x4140000 0x1000000>; - }; - - partition@5140000 { - label = "usrdata"; - reg = <0x5140000 0x1000000>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi deleted file mode 100644 index 5c5cc7da5dd2..000000000000 --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2017 MediaTek Inc. - * Author: John Crispin <john@phrozen.org> - * Sean Wang <sean.wang@mediatek.com> - * - */ - -/dts-v1/; -#include "mt7623.dtsi" -#include "mt6323.dtsi" - -/ { - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - cpus { - cpu0 { - proc-supply = <&mt6323_vproc_reg>; - }; - - cpu1 { - proc-supply = <&mt6323_vproc_reg>; - }; - - cpu2 { - proc-supply = <&mt6323_vproc_reg>; - }; - - cpu3 { - proc-supply = <&mt6323_vproc_reg>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0 0x80000000 0 0x40000000>; - }; - - usb_p1_vbus: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&pio 135 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&mmc0 { - vmmc-supply = <&mt6323_vemc3v3_reg>; - vqmmc-supply = <&mt6323_vio18_reg>; -}; - -&mmc1 { - vmmc-supply = <&mt6323_vmch_reg>; - vqmmc-supply = <&mt6323_vmc_reg>; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb1 { - vbus-supply = <&usb_p1_vbus>; - status = "okay"; -}; - -&u3phy1 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 4994e33bf663..632f52efdf98 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -141,7 +141,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 145 */ + interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 145 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 8c63ac5bbb12..6e944dfa0f3d 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -81,7 +81,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index ee64191e41ca..4c1227d1e79b 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -133,7 +133,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */ + interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 321c2b7a4e9f..285681d7af49 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -49,6 +49,6 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio6>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 177 */ + interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */ }; }; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 76dc08868bfb..1adc73bd2ca0 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -71,6 +71,6 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ }; }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 96d0301a336a..aac27a441331 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -202,7 +202,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio6>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 162 */ + interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index e7c3c563ff8f..12d6822f0057 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -128,6 +128,8 @@ gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ linux,code = <KEY_VOLUMEDOWN>; linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; }; slider { @@ -136,7 +138,8 @@ linux,input-type = <EV_SW>; linux,code = <SW_KEYPAD_SLIDE>; linux,can-disable; - + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; }; }; @@ -369,7 +372,7 @@ compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; interrupt-parent = <&gpio4>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */ + interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index a9a584b5b955..cfcac0d73851 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -36,6 +36,8 @@ label = "button0"; linux,code = <BTN_0>; gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; wakeup-source; }; }; @@ -140,7 +142,7 @@ ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */ + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; /* gpio_44 */ phy-mode = "mii"; diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index eb123b24c8e3..5e8169153414 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -248,6 +248,7 @@ ti,bus-width = <4>; ti,non-removable; cap-power-off-card; + keep-power-in-suspend; }; &twl_usb_comparator { diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi new file mode 100644 index 000000000000..6eb26b837446 --- /dev/null +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -0,0 +1,2444 @@ +// SPDX-License-Identifier: GPL-2.0 +&l4_cfg { /* 0x4a000000 */ + compatible = "ti,omap4-l4-cfg", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */ + <0x00080000 0x4a080000 0x080000>, /* segment 1 */ + <0x00100000 0x4a100000 0x080000>, /* segment 2 */ + <0x00180000 0x4a180000 0x080000>, /* segment 3 */ + <0x00200000 0x4a200000 0x080000>, /* segment 4 */ + <0x00280000 0x4a280000 0x080000>, /* segment 5 */ + <0x00300000 0x4a300000 0x080000>; /* segment 6 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00002000 0x00002000 0x001000>, /* ap 3 */ + <0x00003000 0x00003000 0x001000>, /* ap 4 */ + <0x00004000 0x00004000 0x001000>, /* ap 5 */ + <0x00005000 0x00005000 0x001000>, /* ap 6 */ + <0x00056000 0x00056000 0x001000>, /* ap 7 */ + <0x00057000 0x00057000 0x001000>, /* ap 8 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 9 */ + <0x00058000 0x00058000 0x004000>, /* ap 10 */ + <0x00062000 0x00062000 0x001000>, /* ap 11 */ + <0x00063000 0x00063000 0x001000>, /* ap 12 */ + <0x00008000 0x00008000 0x002000>, /* ap 23 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 24 */ + <0x00066000 0x00066000 0x001000>, /* ap 25 */ + <0x00067000 0x00067000 0x001000>, /* ap 26 */ + <0x0005e000 0x0005e000 0x002000>, /* ap 80 */ + <0x00060000 0x00060000 0x001000>, /* ap 81 */ + <0x00064000 0x00064000 0x001000>, /* ap 86 */ + <0x00065000 0x00065000 0x001000>; /* ap 87 */ + + target-module@2000 { /* 0x4a002000, ap 3 06.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_core"; + reg = <0x2000 0x4>, + <0x2010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + omap4_scm_core: scm@0 { + compatible = "ti,omap4-scm-core", "simple-bus"; + reg = <0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; + + omap_control_usb2phy: control-phy@300 { + compatible = "ti,control-phy-usb2"; + reg = <0x300 0x4>; + reg-names = "power"; + }; + + omap_control_usbotg: control-phy@33c { + compatible = "ti,control-phy-otghs"; + reg = <0x33c 0x4>; + reg-names = "otghs_control"; + }; + }; + }; + + target-module@4000 { /* 0x4a004000, ap 5 02.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + cm1: cm1@0 { + compatible = "ti,omap4-cm1", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm1_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm1_clockdomains: clockdomains { + }; + }; + }; + + target-module@8000 { /* 0x4a008000, ap 23 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x8000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x2000>; + + cm2: cm2@0 { + compatible = "ti,omap4-cm2", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm2_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm2_clockdomains: clockdomains { + }; + }; + }; + + target-module@56000 { /* 0x4a056000, ap 7 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "dma_system"; + reg = <0x56000 0x4>, + <0x5602c 0x4>, + <0x56028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */ + clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap4430-sdma"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; + }; + }; + + target-module@58000 { /* 0x4a058000, ap 10 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "hsi"; + reg = <0x58000 0x4>, + <0x58010 0x4>, + <0x58014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58000 0x4000>; + + hsi: hsi@0 { + compatible = "ti,omap4-hsi"; + reg = <0x0 0x4000>, + <0x4a05c000 0x1000>; + reg-names = "sys", "gdd"; + + clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; + clock-names = "hsi_fck"; + + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x4000>; + + hsi_port1: hsi-port@2000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x2000 0x800>, + <0x2800 0x800>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + }; + + hsi_port2: hsi-port@3000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x3000 0x800>, + <0x3800 0x800>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@5e000 { /* 0x4a05e000, ap 80 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x2000>; + }; + + target-module@62000 { /* 0x4a062000, ap 11 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_tll_hs"; + reg = <0x62000 0x4>, + <0x62010 0x4>, + <0x62014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x62000 0x1000>; + + usbhstll: usbhstll@0 { + compatible = "ti,usbhs-tll"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@64000 { /* 0x4a064000, ap 86 1e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_host_hs"; + reg = <0x64000 0x4>, + <0x64010 0x4>, + <0x64014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x1000>; + + usbhshost: usbhshost@0 { + compatible = "ti,usbhs-host"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + clocks = <&init_60m_fclk>, + <&xclk60mhsp1_ck>, + <&xclk60mhsp2_ck>; + clock-names = "refclk_60m_int", + "refclk_60m_ext_p1", + "refclk_60m_ext_p2"; + + usbhsohci: ohci@800 { + compatible = "ti,ohci-omap3"; + reg = <0x800 0x400>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + remote-wakeup-connected; + }; + + usbhsehci: ehci@c00 { + compatible = "ti,ehci-omap"; + reg = <0xc00 0x400>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@66000 { /* 0x4a066000, ap 25 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmu_dsp"; + reg = <0x66000 0x4>, + <0x66010 0x4>, + <0x66014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */ + clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + /* mmu_dsp cannot be moved before reset driver */ + status = "disabled"; + }; + }; + + segment@80000 { /* 0x4a080000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ + <0x0005a000 0x000da000 0x001000>, /* ap 14 */ + <0x0005b000 0x000db000 0x001000>, /* ap 15 */ + <0x0005c000 0x000dc000 0x001000>, /* ap 16 */ + <0x0005d000 0x000dd000 0x001000>, /* ap 17 */ + <0x0005e000 0x000de000 0x001000>, /* ap 18 */ + <0x00060000 0x000e0000 0x001000>, /* ap 19 */ + <0x00061000 0x000e1000 0x001000>, /* ap 20 */ + <0x00074000 0x000f4000 0x001000>, /* ap 27 */ + <0x00075000 0x000f5000 0x001000>, /* ap 28 */ + <0x00076000 0x000f6000 0x001000>, /* ap 29 */ + <0x00077000 0x000f7000 0x001000>, /* ap 30 */ + <0x00036000 0x000b6000 0x001000>, /* ap 69 */ + <0x00037000 0x000b7000 0x001000>, /* ap 70 */ + <0x0004d000 0x000cd000 0x001000>, /* ap 78 */ + <0x0004e000 0x000ce000 0x001000>, /* ap 79 */ + <0x00029000 0x000a9000 0x001000>, /* ap 82 */ + <0x0002a000 0x000aa000 0x001000>, /* ap 83 */ + <0x0002b000 0x000ab000 0x001000>, /* ap 84 */ + <0x0002c000 0x000ac000 0x001000>, /* ap 85 */ + <0x0002d000 0x000ad000 0x001000>, /* ap 88 */ + <0x0002e000 0x000ae000 0x001000>; /* ap 89 */ + + target-module@29000 { /* 0x4a0a9000, ap 82 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x29000 0x1000>; + }; + + target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_otg_hs"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2b000 0x1000>; + + usb_otg_hs: usb_otg_hs@0 { + compatible = "ti,omap4-musb"; + reg = <0x0 0x7ff>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc", "dma"; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + ctrl-module = <&omap_control_usbotg>; + }; + }; + + target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp_usb_phy"; + reg = <0x2d000 0x4>, + <0x2d010 0x4>, + <0x2d014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2d000 0x1000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + reg = <0x0 0x1f>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + usb2_phy: usb2phy@80 { + compatible = "ti,omap-usb2"; + reg = <0x80 0x58>; + ctrl-module = <&omap_control_usb2phy>; + clocks = <&usb_phy_cm_clk32k>; + clock-names = "wkupclk"; + #phy-cells = <0>; + }; + }; + }; + + target-module@36000 { /* 0x4a0b6000, ap 69 60.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + target-module@4d000 { /* 0x4a0cd000, ap 78 58.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000 0x1000>; + }; + + target-module@59000 { /* 0x4a0d9000, ap 13 1a.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_mpu"; + reg = <0x59038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + smartreflex_mpu: smartreflex@0 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_iva"; + reg = <0x5b038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + smartreflex_iva: smartreflex@0 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_core"; + reg = <0x5d038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + smartreflex_core: smartreflex@0 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@60000 { /* 0x4a0e0000, ap 19 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + }; + + target-module@74000 { /* 0x4a0f4000, ap 27 24.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox"; + reg = <0x74000 0x4>, + <0x74010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x74000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + }; + + target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0x76000 0x4>, + <0x76010 0x4>, + <0x76014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x4a100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */ + <0x00001000 0x00101000 0x001000>, /* ap 22 */ + <0x00002000 0x00102000 0x001000>, /* ap 61 */ + <0x00003000 0x00103000 0x001000>, /* ap 62 */ + <0x00008000 0x00108000 0x001000>, /* ap 63 */ + <0x00009000 0x00109000 0x001000>, /* ap 64 */ + <0x0000a000 0x0010a000 0x001000>, /* ap 65 */ + <0x0000b000 0x0010b000 0x001000>; /* ap 66 */ + + target-module@0 { /* 0x4a100000, ap 21 2a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_pad_core"; + reg = <0x0 0x4>, + <0x10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + omap4_pmx_core: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap4_padconf_global: omap4_padconf_global@5a0 { + compatible = "syscon", + "simple-bus"; + reg = <0x5a0 0x170>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5a0 0x170>; + + pbias_regulator: pbias_regulator@60 { + compatible = "ti,pbias-omap4", "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap4_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap4 { + regulator-name = "pbias_mmc_omap4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + }; + + target-module@2000 { /* 0x4a102000, ap 61 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@8000 { /* 0x4a108000, ap 63 62.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@a000 { /* 0x4a10a000, ap 65 50.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "fdif"; + reg = <0xa000 0x4>, + <0xa010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-delay-us = <2>; + /* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */ + clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + /* No child device binding or driver in mainline */ + }; + }; + + segment@180000 { /* 0x4a180000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@200000 { /* 0x4a200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */ + <0x0001f000 0x0021f000 0x001000>, /* ap 32 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 33 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 34 */ + <0x00004000 0x00204000 0x001000>, /* ap 35 */ + <0x00005000 0x00205000 0x001000>, /* ap 36 */ + <0x00006000 0x00206000 0x001000>, /* ap 37 */ + <0x00007000 0x00207000 0x001000>, /* ap 38 */ + <0x00012000 0x00212000 0x001000>, /* ap 39 */ + <0x00013000 0x00213000 0x001000>, /* ap 40 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 41 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 42 */ + <0x00010000 0x00210000 0x001000>, /* ap 43 */ + <0x00011000 0x00211000 0x001000>, /* ap 44 */ + <0x00016000 0x00216000 0x001000>, /* ap 45 */ + <0x00017000 0x00217000 0x001000>, /* ap 46 */ + <0x00014000 0x00214000 0x001000>, /* ap 47 */ + <0x00015000 0x00215000 0x001000>, /* ap 48 */ + <0x00018000 0x00218000 0x001000>, /* ap 49 */ + <0x00019000 0x00219000 0x001000>, /* ap 50 */ + <0x00020000 0x00220000 0x001000>, /* ap 51 */ + <0x00021000 0x00221000 0x001000>, /* ap 52 */ + <0x00026000 0x00226000 0x001000>, /* ap 53 */ + <0x00027000 0x00227000 0x001000>, /* ap 54 */ + <0x00028000 0x00228000 0x001000>, /* ap 55 */ + <0x00029000 0x00229000 0x001000>, /* ap 56 */ + <0x0002a000 0x0022a000 0x001000>, /* ap 57 */ + <0x0002b000 0x0022b000 0x001000>, /* ap 58 */ + <0x0001c000 0x0021c000 0x001000>, /* ap 59 */ + <0x0001d000 0x0021d000 0x001000>; /* ap 60 */ + + target-module@4000 { /* 0x4a204000, ap 35 42.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a206000, ap 37 4a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x1000>; + }; + + target-module@a000 { /* 0x4a20a000, ap 33 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@c000 { /* 0x4a20c000, ap 41 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@10000 { /* 0x4a210000, ap 43 52.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@12000 { /* 0x4a212000, ap 39 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x12000 0x1000>; + }; + + target-module@14000 { /* 0x4a214000, ap 47 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@16000 { /* 0x4a216000, ap 45 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@18000 { /* 0x4a218000, ap 49 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x1000>; + }; + + target-module@1c000 { /* 0x4a21c000, ap 59 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4a21e000, ap 31 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x4a220000, ap 51 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@26000 { /* 0x4a226000, ap 53 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@28000 { /* 0x4a228000, ap 55 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + }; + + target-module@2a000 { /* 0x4a22a000, ap 57 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + }; + }; + + segment@280000 { /* 0x4a280000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ + <0x00040000 0x00340000 0x001000>, /* ap 68 */ + <0x00020000 0x00320000 0x004000>, /* ap 71 */ + <0x00024000 0x00324000 0x002000>, /* ap 72 */ + <0x00026000 0x00326000 0x001000>, /* ap 73 */ + <0x00027000 0x00327000 0x001000>, /* ap 74 */ + <0x00028000 0x00328000 0x001000>, /* ap 75 */ + <0x00029000 0x00329000 0x001000>, /* ap 76 */ + <0x00030000 0x00330000 0x010000>, /* ap 77 */ + <0x0002a000 0x0032a000 0x002000>, /* ap 90 */ + <0x0002c000 0x0032c000 0x004000>; /* ap 91 */ + + l4_cfg_target_0: target-module@0 { /* 0x4a300000, ap 67 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00020000>, + <0x00020000 0x00020000 0x00004000>, + <0x00024000 0x00024000 0x00002000>, + <0x00026000 0x00026000 0x00001000>, + <0x00027000 0x00027000 0x00001000>, + <0x00028000 0x00028000 0x00001000>, + <0x00029000 0x00029000 0x00001000>, + <0x0002a000 0x0002a000 0x00002000>, + <0x0002c000 0x0002c000 0x00004000>, + <0x00030000 0x00030000 0x00010000>; + }; + }; +}; + +&l4_wkup { /* 0x4a300000 */ + compatible = "ti,omap4-l4-wkup", "simple-bus"; + reg = <0x4a300000 0x800>, + <0x4a300800 0x800>, + <0x4a301000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a300000 0x010000>, /* segment 0 */ + <0x00010000 0x4a310000 0x010000>, /* segment 1 */ + <0x00020000 0x4a320000 0x010000>; /* segment 2 */ + + segment@0 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00006000 0x00006000 0x002000>, /* ap 3 */ + <0x00008000 0x00008000 0x001000>, /* ap 4 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 15 */ + <0x0000b000 0x0000b000 0x001000>, /* ap 16 */ + <0x00004000 0x00004000 0x001000>, /* ap 17 */ + <0x00005000 0x00005000 0x001000>, /* ap 18 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0000d000 0x001000>; /* ap 20 */ + + target-module@4000 { /* 0x4a304000, ap 17 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x4000 0x4>, + <0x4004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x20>; + }; + }; + + target-module@6000 { /* 0x4a306000, ap 3 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x2000>; + + prm: prm@0 { + compatible = "ti,omap4-prm"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + }; + + target-module@a000 { /* 0x4a30a000, ap 15 34.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xa000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + scrm: scrm@0 { + compatible = "ti,omap4-scrm"; + reg = <0x0 0x2000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + }; + + target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_wkup"; + reg = <0xc000 0x4>, + <0xc010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + omap4_scm_wkup: scm@c000 { + compatible = "ti,omap4-scm-wkup"; + reg = <0xc000 0x1000>; + }; + }; + }; + + segment@10000 { /* 0x4a310000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ + <0x00001000 0x00011000 0x001000>, /* ap 6 */ + <0x00004000 0x00014000 0x001000>, /* ap 7 */ + <0x00005000 0x00015000 0x001000>, /* ap 8 */ + <0x00008000 0x00018000 0x001000>, /* ap 9 */ + <0x00009000 0x00019000 0x001000>, /* ap 10 */ + <0x0000c000 0x0001c000 0x001000>, /* ap 11 */ + <0x0000d000 0x0001d000 0x001000>, /* ap 12 */ + <0x0000e000 0x0001e000 0x001000>, /* ap 21 */ + <0x0000f000 0x0001f000 0x001000>; /* ap 22 */ + + gpio1_target: target-module@0 { /* 0x4a310000, ap 5 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>, + <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + ti,gpio-always-on; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@4000 { /* 0x4a314000, ap 7 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@8000 { /* 0x4a318000, ap 9 1c.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x8000 0x4>, + <0x8010 0x4>, + <0x8014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + }; + }; + + target-module@c000 { /* 0x4a31c000, ap 11 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "kbd"; + reg = <0xc000 0x4>, + <0xc010 0x4>, + <0xc014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + keypad: keypad@0 { + compatible = "ti,omap4-keypad"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + reg-names = "mpu"; + }; + }; + + target-module@e000 { /* 0x4a31e000, ap 21 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_pad_wkup"; + reg = <0xe000 0x4>, + <0xe010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe000 0x1000>; + + omap4_pmx_wkup: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + }; + }; + + segment@20000 { /* 0x4a320000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ + <0x0000a000 0x0002a000 0x001000>, /* ap 14 */ + <0x00000000 0x00020000 0x001000>, /* ap 23 */ + <0x00001000 0x00021000 0x001000>, /* ap 24 */ + <0x00002000 0x00022000 0x001000>, /* ap 25 */ + <0x00003000 0x00023000 0x001000>, /* ap 26 */ + <0x00004000 0x00024000 0x001000>, /* ap 27 */ + <0x00005000 0x00025000 0x001000>, /* ap 28 */ + <0x00007000 0x00027000 0x000400>, /* ap 29 */ + <0x00008000 0x00028000 0x000800>, /* ap 30 */ + <0x00009000 0x00029000 0x000400>; /* ap 31 */ + + target-module@0 { /* 0x4a320000, ap 23 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + target-module@2000 { /* 0x4a322000, ap 25 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@4000 { /* 0x4a324000, ap 27 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a326000, ap 13 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00006000 0x00001000>, + <0x00001000 0x00007000 0x00000400>, + <0x00002000 0x00008000 0x00000800>, + <0x00003000 0x00009000 0x00000400>; + }; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,omap4-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ + <0x00200000 0x48200000 0x200000>; /* segment 1 */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00020000 0x00020000 0x001000>, /* ap 3 */ + <0x00021000 0x00021000 0x001000>, /* ap 4 */ + <0x00032000 0x00032000 0x001000>, /* ap 5 */ + <0x00033000 0x00033000 0x001000>, /* ap 6 */ + <0x00034000 0x00034000 0x001000>, /* ap 7 */ + <0x00035000 0x00035000 0x001000>, /* ap 8 */ + <0x00036000 0x00036000 0x001000>, /* ap 9 */ + <0x00037000 0x00037000 0x001000>, /* ap 10 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ + <0x00040000 0x00040000 0x010000>, /* ap 13 */ + <0x00050000 0x00050000 0x001000>, /* ap 14 */ + <0x00055000 0x00055000 0x001000>, /* ap 15 */ + <0x00056000 0x00056000 0x001000>, /* ap 16 */ + <0x00057000 0x00057000 0x001000>, /* ap 17 */ + <0x00058000 0x00058000 0x001000>, /* ap 18 */ + <0x00059000 0x00059000 0x001000>, /* ap 19 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 20 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 21 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 22 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 23 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 24 */ + <0x00060000 0x00060000 0x001000>, /* ap 25 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 26 */ + <0x0006b000 0x0006b000 0x001000>, /* ap 27 */ + <0x0006c000 0x0006c000 0x001000>, /* ap 28 */ + <0x0006d000 0x0006d000 0x001000>, /* ap 29 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 30 */ + <0x0006f000 0x0006f000 0x001000>, /* ap 31 */ + <0x00070000 0x00070000 0x001000>, /* ap 32 */ + <0x00071000 0x00071000 0x001000>, /* ap 33 */ + <0x00072000 0x00072000 0x001000>, /* ap 34 */ + <0x00073000 0x00073000 0x001000>, /* ap 35 */ + <0x00061000 0x00061000 0x001000>, /* ap 36 */ + <0x00096000 0x00096000 0x001000>, /* ap 37 */ + <0x00097000 0x00097000 0x001000>, /* ap 38 */ + <0x00076000 0x00076000 0x001000>, /* ap 39 */ + <0x00077000 0x00077000 0x001000>, /* ap 40 */ + <0x00078000 0x00078000 0x001000>, /* ap 41 */ + <0x00079000 0x00079000 0x001000>, /* ap 42 */ + <0x00086000 0x00086000 0x001000>, /* ap 43 */ + <0x00087000 0x00087000 0x001000>, /* ap 44 */ + <0x00088000 0x00088000 0x001000>, /* ap 45 */ + <0x00089000 0x00089000 0x001000>, /* ap 46 */ + <0x000b0000 0x000b0000 0x001000>, /* ap 47 */ + <0x000b1000 0x000b1000 0x001000>, /* ap 48 */ + <0x00098000 0x00098000 0x001000>, /* ap 49 */ + <0x00099000 0x00099000 0x001000>, /* ap 50 */ + <0x0009a000 0x0009a000 0x001000>, /* ap 51 */ + <0x0009b000 0x0009b000 0x001000>, /* ap 52 */ + <0x0009c000 0x0009c000 0x001000>, /* ap 53 */ + <0x0009d000 0x0009d000 0x001000>, /* ap 54 */ + <0x0009e000 0x0009e000 0x001000>, /* ap 55 */ + <0x0009f000 0x0009f000 0x001000>, /* ap 56 */ + <0x00090000 0x00090000 0x002000>, /* ap 57 */ + <0x00092000 0x00092000 0x001000>, /* ap 58 */ + <0x000a4000 0x000a4000 0x001000>, /* ap 59 */ + <0x000a6000 0x000a6000 0x001000>, /* ap 60 */ + <0x000a8000 0x000a8000 0x004000>, /* ap 61 */ + <0x000ac000 0x000ac000 0x001000>, /* ap 62 */ + <0x000ad000 0x000ad000 0x001000>, /* ap 63 */ + <0x000ae000 0x000ae000 0x001000>, /* ap 64 */ + <0x000b2000 0x000b2000 0x001000>, /* ap 65 */ + <0x000b3000 0x000b3000 0x001000>, /* ap 66 */ + <0x000b4000 0x000b4000 0x001000>, /* ap 67 */ + <0x000b5000 0x000b5000 0x001000>, /* ap 68 */ + <0x000b8000 0x000b8000 0x001000>, /* ap 69 */ + <0x000b9000 0x000b9000 0x001000>, /* ap 70 */ + <0x000ba000 0x000ba000 0x001000>, /* ap 71 */ + <0x000bb000 0x000bb000 0x001000>, /* ap 72 */ + <0x000d1000 0x000d1000 0x001000>, /* ap 73 */ + <0x000d2000 0x000d2000 0x001000>, /* ap 74 */ + <0x000d5000 0x000d5000 0x001000>, /* ap 75 */ + <0x000d6000 0x000d6000 0x001000>, /* ap 76 */ + <0x000a2000 0x000a2000 0x001000>, /* ap 79 */ + <0x000a3000 0x000a3000 0x001000>, /* ap 80 */ + <0x00001400 0x00001400 0x000400>, /* ap 81 */ + <0x00001800 0x00001800 0x000400>, /* ap 82 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 83 */ + <0x000a5000 0x000a5000 0x001000>; /* ap 84 */ + + target-module@20000 { /* 0x48020000, ap 3 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart3: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@32000 { /* 0x48032000, ap 5 02.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x32000 0x4>, + <0x32010 0x4>, + <0x32014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@34000 { /* 0x48034000, ap 7 04.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x34000 0x4>, + <0x34010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + + timer3: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@36000 { /* 0x48036000, ap 9 0e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x36000 0x4>, + <0x36010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + + timer4: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@3e000 { /* 0x4803e000, ap 11 08.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer9"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + timer9: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@40000 { /* 0x48040000, ap 13 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x10000>; + }; + + target-module@55000 { /* 0x48055000, ap 15 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x55000 0x4>, + <0x55010 0x4>, + <0x55114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@57000 { /* 0x48057000, ap 17 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0x57000 0x4>, + <0x57010 0x4>, + <0x57114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@59000 { /* 0x48059000, ap 19 10.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0x59000 0x4>, + <0x59010 0x4>, + <0x59114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5b000 { /* 0x4805b000, ap 21 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio5"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>, + <0x5b114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5d000 { /* 0x4805d000, ap 23 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio6"; + reg = <0x5d000 0x4>, + <0x5d010 0x4>, + <0x5d114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + gpio6: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@60000 { /* 0x48060000, ap 25 1e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x60000 0x8>, + <0x60010 0x8>, + <0x60090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + i2c3: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@6a000 { /* 0x4806a000, ap 26 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x6a050 0x4>, + <0x6a054 0x4>, + <0x6a058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6a000 0x1000>; + + uart1: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6c000 { /* 0x4806c000, ap 28 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x6c050 0x4>, + <0x6c054 0x4>, + <0x6c058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x1000>; + + uart2: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0x6e050 0x4>, + <0x6e054 0x4>, + <0x6e058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6e000 0x1000>; + + uart4: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@70000 { /* 0x48070000, ap 32 28.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0x70000 0x8>, + <0x70010 0x8>, + <0x70090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@72000 { /* 0x48072000, ap 34 30.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x72000 0x8>, + <0x72010 0x8>, + <0x72090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x72000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@76000 { /* 0x48076000, ap 39 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "slimbus2"; + reg = <0x76000 0x4>, + <0x76010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + /* No child device binding or driver in mainline */ + }; + + target-module@78000 { /* 0x48078000, ap 41 1a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "elm"; + reg = <0x78000 0x4>, + <0x78010 0x4>, + <0x78014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x1000>; + + elm: elm@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@86000 { /* 0x48086000, ap 43 24.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer10"; + reg = <0x86000 0x4>, + <0x86010 0x4>, + <0x86014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + timer10: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@88000 { /* 0x48088000, ap 45 2e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer11"; + reg = <0x88000 0x4>, + <0x88010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x88000 0x1000>; + + timer11: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@90000 { /* 0x48090000, ap 57 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x2000>; + }; + + target-module@96000 { /* 0x48096000, ap 37 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp4"; + reg = <0x9608c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x96000 0x1000>; + + mcbsp4: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>; /* L4 Interconnect */ + reg-names = "mpu"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@98000 { /* 0x48098000, ap 49 22.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi1"; + reg = <0x98000 0x4>, + <0x98010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x98000 0x1000>; + + mcspi1: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + }; + + target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi2"; + reg = <0x9a000 0x4>, + <0x9a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9a000 0x1000>; + + mcspi2: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + }; + + target-module@9c000 { /* 0x4809c000, ap 53 36.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x9c000 0x4>, + <0x9c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; + }; + }; + + target-module@9e000 { /* 0x4809e000, ap 55 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9e000 0x1000>; + }; + + target-module@a2000 { /* 0x480a2000, ap 79 3a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x480a4000, ap 59 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x000a4000 0x00001000>, + <0x00001000 0x000a5000 0x00001000>; + }; + + target-module@a8000 { /* 0x480a8000, ap 61 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x4000>; + }; + + target-module@ad000 { /* 0x480ad000, ap 63 50.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc3"; + reg = <0xad000 0x4>, + <0xad010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xad000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b0000 { /* 0x480b0000, ap 47 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb0000 0x1000>; + }; + + target-module@b2000 { /* 0x480b2000, ap 65 3c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "hdq1w"; + reg = <0xb2000 0x4>, + <0xb2014 0x4>, + <0xb2018 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + ti,no-reset-on-init; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb2000 0x1000>; + + hdqw1w: 1w@0 { + compatible = "ti,omap3-1w"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@b4000 { /* 0x480b4000, ap 67 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xb4000 0x4>, + <0xb4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb4000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b8000 { /* 0x480b8000, ap 69 58.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi3"; + reg = <0xb8000 0x4>, + <0xb8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000 0x1000>; + + mcspi3: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@ba000 { /* 0x480ba000, ap 71 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi4"; + reg = <0xba000 0x4>, + <0xba010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xba000 0x1000>; + + mcspi4: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@d1000 { /* 0x480d1000, ap 73 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc4"; + reg = <0xd1000 0x4>, + <0xd1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd1000 0x1000>; + + mmc4: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; + }; + }; + + target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc5"; + reg = <0xd5000 0x4>, + <0xd5010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd5000 0x1000>; + + mmc5: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */ + <0x00151000 0x00351000 0x001000>; /* ap 78 */ + + target-module@150000 { /* 0x48350000, ap 77 4c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c4"; + reg = <0x150000 0x8>, + <0x150010 0x8>, + <0x150090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x150000 0x1000>; + + i2c4: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 5501d1b4e6cd..27895c1604b9 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -5,6 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <dt-bindings/input/input.h> #include "elpida_ecb240abacn.dtsi" / { @@ -43,6 +44,21 @@ }; }; + gpio_keys: gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = < + &button_pins + >; + + buttonS2 { + label = "button S2"; + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ + linux,code = <BTN_0>; + wakeup-source; + }; + }; + sound: sound { compatible = "ti,abe-twl6040"; ti,model = "PandaBoard"; @@ -357,6 +373,12 @@ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */ + >; + }; }; &omap4_pmx_wkup { @@ -464,7 +486,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio2>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 940fe4f7c5f6..19d02df8d8a5 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -46,6 +46,12 @@ OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ >; }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ + >; + }; }; &led_wkgpio_pins { @@ -68,6 +74,12 @@ }; }; -&gpio1 { +&gpio_keys { + buttonS2 { + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */ + }; +}; + +&gpio1_target { ti,no-reset-on-init; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 280d92d42bf1..490726b52216 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -493,7 +493,7 @@ compatible = "ti,wl1281"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 1c5f6f35e1cf..878923473023 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -72,7 +72,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio2>; - interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ + interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index e554b6e039f3..1a96d4317c97 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -139,174 +139,13 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - l4_cfg: l4@4a000000 { - compatible = "ti,omap4-l4-cfg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a000000 0x1000000>; - - cm1: cm1@4000 { - compatible = "ti,omap4-cm1", "simple-bus"; - reg = <0x4000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4000 0x2000>; - - cm1_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm1_clockdomains: clockdomains { - }; - }; - - cm2: cm2@8000 { - compatible = "ti,omap4-cm2", "simple-bus"; - reg = <0x8000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x8000 0x2000>; - - cm2_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm2_clockdomains: clockdomains { - }; - }; - - omap4_scm_core: scm@2000 { - compatible = "ti,omap4-scm-core", "simple-bus"; - reg = <0x2000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2000 0x1000>; - ti,hwmods = "ctrl_module_core"; - - scm_conf: scm_conf@0 { - compatible = "syscon"; - reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - - omap4_padconf_core: scm@100000 { - compatible = "ti,omap4-scm-padconf-core", - "simple-bus"; - reg = <0x100000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x100000 0x1000>; - ti,hwmods = "ctrl_module_pad_core"; - - omap4_pmx_core: pinmux@40 { - compatible = "ti,omap4-padconf", - "pinctrl-single"; - reg = <0x40 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap4_padconf_global: omap4_padconf_global@5a0 { - compatible = "syscon", - "simple-bus"; - reg = <0x5a0 0x170>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x5a0 0x170>; - - pbias_regulator: pbias_regulator@60 { - compatible = "ti,pbias-omap4", "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap4_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap4 { - regulator-name = "pbias_mmc_omap4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; - }; - - l4_wkup: l4@300000 { - compatible = "ti,omap4-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x300000 0x40000>; - - counter32k: counter@4000 { - compatible = "ti,omap-counter32k"; - reg = <0x4000 0x20>; - ti,hwmods = "counter_32k"; - }; - - prm: prm@6000 { - compatible = "ti,omap4-prm"; - reg = <0x6000 0x2000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x6000 0x2000>; - - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@a000 { - compatible = "ti,omap4-scrm"; - reg = <0xa000 0x2000>; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - - omap4_scm_wkup: scm@c000 { - compatible = "ti,omap4-scm-wkup"; - reg = <0xc000 0x1000>; - ti,hwmods = "ctrl_module_wkup"; - }; + l4_wkup: interconnect@4a300000 { + }; - omap4_padconf_wkup: padconf@1e000 { - compatible = "ti,omap4-scm-padconf-wkup", - "simple-bus"; - reg = <0x1e000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1e000 0x1000>; - ti,hwmods = "ctrl_module_pad_wkup"; + l4_cfg: interconnect@4a000000 { + }; - omap4_pmx_wkup: pinmux@40 { - compatible = "ti,omap4-padconf", - "pinctrl-single"; - reg = <0x40 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - }; - }; + l4_per: interconnect@48000000 { }; ocmcram: ocmcram@40304000 { @@ -314,114 +153,6 @@ reg = <0x40304000 0xa000>; /* 40k */ }; - sdma: dma-controller@4a056000 { - compatible = "ti,omap4430-sdma"; - reg = <0x4a056000 0x1000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <127>; - ti,hwmods = "dma_system"; - }; - - gpio1: gpio@4a310000 { - compatible = "ti,omap4-gpio"; - reg = <0x4a310000 0x200>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio1"; - ti,gpio-always-on; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@48055000 { - compatible = "ti,omap4-gpio"; - reg = <0x48055000 0x200>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio2"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@48057000 { - compatible = "ti,omap4-gpio"; - reg = <0x48057000 0x200>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio3"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@48059000 { - compatible = "ti,omap4-gpio"; - reg = <0x48059000 0x200>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio4"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@4805b000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805b000 0x200>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio5"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@4805d000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805d000 0x200>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio6"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - target-module@48076000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "slimbus2"; - reg = <0x48076000 0x4>, - <0x48076010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x48076000 0x001000>; - - /* No child device binding or driver in mainline */ - }; - - elm: elm@48078000 { - compatible = "ti,am3352-elm"; - reg = <0x48078000 0x2000>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "elm"; - status = "disabled"; - }; - gpmc: gpmc@50000000 { compatible = "ti,omap4430-gpmc"; reg = <0x50000000 0x1000>; @@ -442,302 +173,6 @@ #gpio-cells = <2>; }; - uart1: serial@4806a000 { - compatible = "ti,omap4-uart"; - reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart1"; - clock-frequency = <48000000>; - }; - - uart2: serial@4806c000 { - compatible = "ti,omap4-uart"; - reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - }; - - uart3: serial@48020000 { - compatible = "ti,omap4-uart"; - reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart3"; - clock-frequency = <48000000>; - }; - - uart4: serial@4806e000 { - compatible = "ti,omap4-uart"; - reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - - target-module@4a0db000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_iva"; - reg = <0x4a0db038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0db000 0x001000>; - - smartreflex_iva: smartreflex@0 { - compatible = "ti,omap4-smartreflex-iva"; - reg = <0 0x80>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - target-module@4a0dd000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_core"; - reg = <0x4a0dd038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0dd000 0x001000>; - - smartreflex_core: smartreflex@0 { - compatible = "ti,omap4-smartreflex-core"; - reg = <0 0x80>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - target-module@4a0d9000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_mpu"; - reg = <0x4a0d9038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0d9000 0x001000>; - - smartreflex_mpu: smartreflex@0 { - compatible = "ti,omap4-smartreflex-mpu"; - reg = <0 0x80>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - hwspinlock: spinlock@4a0f6000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x4a0f6000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - - i2c1: i2c@48070000 { - compatible = "ti,omap4-i2c"; - reg = <0x48070000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - }; - - i2c2: i2c@48072000 { - compatible = "ti,omap4-i2c"; - reg = <0x48072000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - }; - - i2c3: i2c@48060000 { - compatible = "ti,omap4-i2c"; - reg = <0x48060000 0x100>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - }; - - i2c4: i2c@48350000 { - compatible = "ti,omap4-i2c"; - reg = <0x48350000 0x100>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c4"; - }; - - mcspi1: spi@48098000 { - compatible = "ti,omap4-mcspi"; - reg = <0x48098000 0x200>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; - dmas = <&sdma 35>, - <&sdma 36>, - <&sdma 37>, - <&sdma 38>, - <&sdma 39>, - <&sdma 40>, - <&sdma 41>, - <&sdma 42>; - dma-names = "tx0", "rx0", "tx1", "rx1", - "tx2", "rx2", "tx3", "rx3"; - }; - - mcspi2: spi@4809a000 { - compatible = "ti,omap4-mcspi"; - reg = <0x4809a000 0x200>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi2"; - ti,spi-num-cs = <2>; - dmas = <&sdma 43>, - <&sdma 44>, - <&sdma 45>, - <&sdma 46>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - }; - - hdqw1w: 1w@480b2000 { - compatible = "ti,omap3-1w"; - reg = <0x480b2000 0x1000>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "hdq1w"; - }; - - mcspi3: spi@480b8000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480b8000 0x200>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi3"; - ti,spi-num-cs = <2>; - dmas = <&sdma 15>, <&sdma 16>; - dma-names = "tx0", "rx0"; - }; - - mcspi4: spi@480ba000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480ba000 0x200>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi4"; - ti,spi-num-cs = <1>; - dmas = <&sdma 70>, <&sdma 71>; - dma-names = "tx0", "rx0"; - }; - - mmc1: mmc@4809c000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x4809c000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - dmas = <&sdma 61>, <&sdma 62>; - dma-names = "tx", "rx"; - pbias-supply = <&pbias_mmc_reg>; - }; - - mmc2: mmc@480b4000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480b4000 0x400>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&sdma 47>, <&sdma 48>; - dma-names = "tx", "rx"; - }; - - mmc3: mmc@480ad000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480ad000 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc3"; - ti,needs-special-reset; - dmas = <&sdma 77>, <&sdma 78>; - dma-names = "tx", "rx"; - }; - - mmc4: mmc@480d1000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d1000 0x400>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc4"; - ti,needs-special-reset; - dmas = <&sdma 57>, <&sdma 58>; - dma-names = "tx", "rx"; - }; - - mmc5: mmc@480d5000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d5000 0x400>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc5"; - ti,needs-special-reset; - dmas = <&sdma 59>, <&sdma 60>; - dma-names = "tx", "rx"; - }; - - hsi: hsi@4a058000 { - compatible = "ti,omap4-hsi"; - reg = <0x4a058000 0x4000>, - <0x4a05c000 0x1000>; - reg-names = "sys", "gdd"; - ti,hwmods = "hsi"; - - clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; - clock-names = "hsi_fck"; - - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gdd_mpu"; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a058000 0x4000>; - - hsi_port1: hsi-port@2000 { - compatible = "ti,omap4-hsi-port"; - reg = <0x2000 0x800>, - <0x2800 0x800>; - reg-names = "tx", "rx"; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - }; - - hsi_port2: hsi-port@3000 { - compatible = "ti,omap4-hsi-port"; - reg = <0x3000 0x800>, - <0x3800 0x800>; - reg-names = "tx", "rx"; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - mmu_dsp: mmu@4a066000 { compatible = "ti,omap4-iommu"; reg = <0x4a066000 0x100>; @@ -779,20 +214,33 @@ #iommu-cells = <0>; ti,iommu-bus-err-back; }; - - wdt2: wdt@4a314000 { - compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - reg = <0x4a314000 0x80>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "wd_timer2"; - }; - - wdt3: wdt@40130000 { - compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - reg = <0x40130000 0x80>, /* MPU private access */ - <0x49030000 0x80>; /* L3 Interconnect */ - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + target-module@40130000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "wd_timer3"; + reg = <0x40130000 0x4>, + <0x40130010 0x4>, + <0x40130014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): abe, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40130000 0x1000>, /* MPU private access */ + <0x49030000 0x49030000 0x0080>; /* L3 Interconnect */ + + wdt3: wdt@0 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; }; mcpdm: mcpdm@40132000 { @@ -938,28 +386,6 @@ */ }; - mcbsp4: mcbsp@48096000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x48096000 0xff>; /* L4 Interconnect */ - reg-names = "mpu"; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp4"; - dmas = <&sdma 31>, - <&sdma 32>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - keypad: keypad@4a31c000 { - compatible = "ti,omap4-keypad"; - reg = <0x4a31c000 0x80>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - reg-names = "mpu"; - ti,hwmods = "kbd"; - }; - dmm@4e000000 { compatible = "ti,omap4-dmm"; reg = <0x4e000000 0x800>; @@ -991,95 +417,6 @@ hw-caps-temp-alert; }; - ocp2scp@4a0ad000 { - compatible = "ti,omap-ocp2scp"; - reg = <0x4a0ad000 0x1f>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "ocp2scp_usb_phy"; - usb2_phy: usb2phy@4a0ad080 { - compatible = "ti,omap-usb2"; - reg = <0x4a0ad080 0x58>; - ctrl-module = <&omap_control_usb2phy>; - clocks = <&usb_phy_cm_clk32k>; - clock-names = "wkupclk"; - #phy-cells = <0>; - }; - }; - - mailbox: mailbox@4a0f4000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4a0f4000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <3>; - ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <1 0 0>; - }; - mbox_dsp: mbox_dsp { - ti,mbox-tx = <3 0 0>; - ti,mbox-rx = <2 0 0>; - }; - }; - - target-module@4a10a000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "fdif"; - reg = <0x4a10a000 0x4>, - <0x4a10a010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-delay-us = <2>; - clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a10a000 0x1000>; - - /* No child device binding or driver in mainline */ - }; - - timer1: timer@4a318000 { - compatible = "ti,omap3430-timer"; - reg = <0x4a318000 0x80>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; - clock-names = "fck"; - }; - - timer2: timer@48032000 { - compatible = "ti,omap3430-timer"; - reg = <0x48032000 0x80>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer2"; - }; - - timer3: timer@48034000 { - compatible = "ti,omap4430-timer"; - reg = <0x48034000 0x80>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48036000 { - compatible = "ti,omap4430-timer"; - reg = <0x48036000 0x80>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer4"; - }; - timer5: timer@40138000 { compatible = "ti,omap4430-timer"; reg = <0x40138000 0x80>, @@ -1117,92 +454,6 @@ ti,timer-dsp; }; - timer9: timer@4803e000 { - compatible = "ti,omap4430-timer"; - reg = <0x4803e000 0x80>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer9"; - ti,timer-pwm; - }; - - timer10: timer@48086000 { - compatible = "ti,omap3430-timer"; - reg = <0x48086000 0x80>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer10"; - ti,timer-pwm; - }; - - timer11: timer@48088000 { - compatible = "ti,omap4430-timer"; - reg = <0x48088000 0x80>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer11"; - ti,timer-pwm; - }; - - usbhstll: usbhstll@4a062000 { - compatible = "ti,usbhs-tll"; - reg = <0x4a062000 0x1000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "usb_tll_hs"; - }; - - usbhshost: usbhshost@4a064000 { - compatible = "ti,usbhs-host"; - reg = <0x4a064000 0x800>; - ti,hwmods = "usb_host_hs"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&init_60m_fclk>, - <&xclk60mhsp1_ck>, - <&xclk60mhsp2_ck>; - clock-names = "refclk_60m_int", - "refclk_60m_ext_p1", - "refclk_60m_ext_p2"; - - usbhsohci: ohci@4a064800 { - compatible = "ti,ohci-omap3"; - reg = <0x4a064800 0x400>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - remote-wakeup-connected; - }; - - usbhsehci: ehci@4a064c00 { - compatible = "ti,ehci-omap"; - reg = <0x4a064c00 0x400>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - omap_control_usb2phy: control-phy@4a002300 { - compatible = "ti,control-phy-usb2"; - reg = <0x4a002300 0x4>; - reg-names = "power"; - }; - - omap_control_usbotg: control-phy@4a00233c { - compatible = "ti,control-phy-otghs"; - reg = <0x4a00233c 0x4>; - reg-names = "otghs_control"; - }; - - usb_otg_hs: usb_otg_hs@4a0ab000 { - compatible = "ti,omap4-musb"; - reg = <0x4a0ab000 0x7ff>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mc", "dma"; - ti,hwmods = "usb_otg_hs"; - usb-phy = <&usb2_phy>; - phys = <&usb2_phy>; - phy-names = "usb2-phy"; - multipoint = <1>; - num-eps = <16>; - ram-bits = <12>; - ctrl-module = <&omap_control_usbotg>; - }; - aes1: aes@4b501000 { compatible = "ti,omap4-aes"; ti,hwmods = "aes1"; @@ -1377,4 +628,5 @@ }; }; +#include "omap4-l4.dtsi" #include "omap44xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index ad97493e4e46..2223dc0d63c0 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -92,4 +92,40 @@ coefficients = <348 (-9301)>; }; +/* Only some L4 CFG interconnect ranges are different on 4460 */ +&l4_cfg_segment_300000 { + ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ + <0x00040000 0x00340000 0x001000>, /* ap 68 */ + <0x00020000 0x00320000 0x004000>, /* ap 71 */ + <0x00024000 0x00324000 0x002000>, /* ap 72 */ + <0x00026000 0x00326000 0x001000>, /* ap 73 */ + <0x00027000 0x00327000 0x001000>, /* ap 74 */ + <0x00028000 0x00328000 0x001000>, /* ap 75 */ + <0x00029000 0x00329000 0x001000>, /* ap 76 */ + <0x00030000 0x00330000 0x010000>, /* ap 77 */ + <0x0002a000 0x0032a000 0x002000>, /* ap 90 */ + <0x0002c000 0x0032c000 0x004000>, /* ap 91 */ + <0x00010000 0x00310000 0x008000>, /* ap 92 */ + <0x00018000 0x00318000 0x004000>, /* ap 93 */ + <0x0001c000 0x0031c000 0x002000>, /* ap 94 */ + <0x0001e000 0x0031e000 0x002000>; /* ap 95 */ +}; + +&l4_cfg_target_0 { + ranges = <0x00000000 0x00000000 0x00010000>, + <0x00010000 0x00010000 0x00008000>, + <0x00018000 0x00018000 0x00004000>, + <0x0001c000 0x0001c000 0x00002000>, + <0x0001e000 0x0001e000 0x00002000>, + <0x00020000 0x00020000 0x00004000>, + <0x00024000 0x00024000 0x00002000>, + <0x00026000 0x00026000 0x00001000>, + <0x00027000 0x00027000 0x00001000>, + <0x00028000 0x00028000 0x00001000>, + <0x00029000 0x00029000 0x00001000>, + <0x0002a000 0x0002a000 0x00002000>, + <0x0002c000 0x0002c000 0x00004000>, + <0x00030000 0x00030000 0x00010000>; +}; + /include/ "omap446x-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 3b2244560c28..ab6f640b282b 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -364,7 +364,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wlcore_irq_pin>; interrupt-parent = <&gpio1>; - interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ + interrupts = <14 IRQ_TYPE_EDGE_RISING>; /* gpio 14 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 732b61a0e990..574ac11c0489 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -61,6 +61,20 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1500000 1250000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index e4ebcde17837..a520b4c14ea9 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -141,7 +141,7 @@ interrupts = <30 31>; }; - lcd-controller@40500000 { + lcdc: lcd-controller@40500000 { compatible = "marvell,pxa2xx-lcdc"; reg = <0x44000000 0x10000>; interrupts = <17>; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index 132a3b8ab148..3a8f0edc3af9 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -135,6 +135,7 @@ reg = <0x43100000 90>; interrupts = <45>; clocks = <&clks CLK_NAND>; + clock-names = "core"; dmas = <&pdma 97 3>; dma-names = "data"; #address-cells = <1>; @@ -242,6 +243,38 @@ clocks = <&clks CLK_PWM1>; status = "disabled"; }; + + ssp1: ssp@41000000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41000000 0x40>; + interrupts = <24>; + clocks = <&clks CLK_SSP1>; + status = "disabled"; + }; + + ssp2: ssp@41700000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41700000 0x40>; + interrupts = <16>; + clocks = <&clks CLK_SSP2>; + status = "disabled"; + }; + + ssp3: ssp@41900000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41900000 0x40>; + interrupts = <0>; + clocks = <&clks CLK_SSP3>; + status = "disabled"; + }; + + ssp4: ssp@41a00000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41a00000 0x40>; + interrupts = <13>; + clocks = <&clks CLK_SSP4>; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 7bcd7635e723..78db67337ed4 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -77,6 +77,14 @@ reg = <0x1>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; cpu@2 { @@ -88,6 +96,14 @@ reg = <0x2>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; cpu@3 { @@ -99,6 +115,14 @@ reg = <0x3>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 1e0a3b446f7a..70790ac242d1 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/qcom,gcc-ipq806x.h> #include <dt-bindings/clock/qcom,lcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { model = "Qualcomm IPQ8064"; @@ -43,7 +44,8 @@ cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 10 0x304>; + interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; }; reserved-memory { @@ -97,7 +99,7 @@ clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; - interrupts = <0 85 1>; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; interrupt-names = "lpass-irq-lpaif"; reg = <0x28100000 0x10000>; reg-names = "lpass-lpaif"; @@ -111,7 +113,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 16 0x4>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; intc: interrupt-controller@2000000 { @@ -125,11 +127,16 @@ timer@200a000 { compatible = "qcom,kpss-timer", "qcom,kpss-wdt-ipq8064", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>, - <1 4 0x301>, - <1 5 0x301>; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; reg = <0x0200a000 0x100>; clock-frequency = <25000000>, <32768>; @@ -177,7 +184,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12490000 0x1000>, <0x12480000 0x1000>; - interrupts = <0 195 0x0>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -186,7 +193,7 @@ i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; - interrupts = <0 196 0>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; @@ -215,7 +222,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, <0x16300000 0x1000>; - interrupts = <0 152 0x0>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -224,7 +231,7 @@ i2c@16380000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16380000 0x1000>; - interrupts = <0 153 0>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; @@ -252,7 +259,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x1a240000 0x1000>, <0x1a200000 0x1000>; - interrupts = <0 154 0x0>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -261,7 +268,7 @@ i2c@1a280000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x1a280000 0x1000>; - interrupts = <0 155 0>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; @@ -274,7 +281,7 @@ spi@1a280000 { compatible = "qcom,spi-qup-v1.1.1"; reg = <0x1a280000 0x1000>; - interrupts = <0 155 0>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; @@ -301,7 +308,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; - interrupts = <0 158 0x0>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -323,7 +330,7 @@ compatible = "qcom,ipq806x-ahci", "generic-ahci"; reg = <0x29000000 0x180>; - interrupts = <0 209 0x0>; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SFAB_SATA_S_H_CLK>, <&gcc SATA_H_CLK>, diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 4dc0b347b1ee..c2dc9d09484a 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -189,6 +189,8 @@ regulator-max-microvolt = <2950000>; regulator-boot-on; + regulator-system-load = <200000>; + regulator-allow-set-load; }; l21 { diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 5af2a0116ff2..474baa0c7cfc 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Genmai board * * Copyright (C) 2013-14 Renesas Solutions Corp. * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index 779f724b4531..fe1a4aa4d7cb 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the GR-Peach board * * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> * Copyright (C) 2016 Renesas Electronics - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index 5dcaaf131d27..8ee44a100e9a 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the RZ/A1H RSK board * * Copyright (C) 2016 Renesas Electronics - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index a54822e97bac..2211f88ede2a 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r7s72100 SoC * * Copyright (C) 2013-14 Renesas Solutions Corp. * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r7s72100-clock.h> diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 125c39c0222f..d530f451467e 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the APE6EVM board * * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 080d037f5733..dd865f3c2eda 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a73a4 SoC * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Magnus Damm - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a73a4-clock.h> diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 03b00d87b39b..32757caa2584 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the armadillo 800 eva board * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index eb9a911deefb..383cba68dbba 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7740 SoC * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7740-clock.h> diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts index d90eb8464222..327545119ee3 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts index 6aa6b7467704..b683db4da8b1 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ/G1M Qseven board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi index d364685d9184..0e2e033cc849 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1M-20M Qseven SOM * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7743.dtsi" diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts index 3d918d106593..ca0e0fc9b246 100644 --- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SK-RZG1M board * * Copyright (C) 2016-2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 142949d7066f..24715f74ae08 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7743 SoC * * Copyright (C) 2016-2017 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/interrupt-controller/irq.h> @@ -98,8 +95,17 @@ reg = <1>; clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; + clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7743_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; }; L2_CA15: cache-controller-0 { diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts index d34de8266ccd..2aeebfc9e4f1 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1E SODIMM carrier board + HDMI daughter * board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7745-iwg22d-sodimm.dts" diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index a4058f4cfbcd..1db220cfc1a1 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1E SODIMM carrier board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi index 29b6e10fdf96..41f111b99a75 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi +++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7745.dtsi" diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts index b4d679b04ad6..655b10bb42d5 100644 --- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SK-RZG1E board * * Copyright (C) 2016-2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 1cb7a7ab0418..c53f7ff20695 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7745 SoC * * Copyright (C) 2016-2017 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index c85032f9605b..87d32d3e23de 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -7,7 +7,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/clock/r8a77470-cpg-mssr.h> / { compatible = "renesas,r8a77470"; #address-cells = <2>; @@ -22,7 +22,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; - clocks = <&cpg CPG_CORE 0>; + clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; power-domains = <&sysc 5>; next-level-cache = <&L2_CA7>; }; @@ -209,7 +209,7 @@ reg = <0 0xe6e60000 0 0x40>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 721>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; @@ -225,7 +225,7 @@ reg = <0 0xe6e68000 0 0x40>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 720>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; @@ -241,7 +241,7 @@ reg = <0 0xe6e58000 0 0x40>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 719>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; @@ -257,7 +257,7 @@ reg = <0 0xe6ea8000 0 0x40>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 718>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; @@ -273,7 +273,7 @@ reg = <0 0xe6ee0000 0 0x40>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 715>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; @@ -289,7 +289,7 @@ reg = <0 0xe6ee8000 0 0x40>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 714>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index c79d55eb43c5..de808d2ea856 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Reference Device Tree Source for the Bock-W board * @@ -8,10 +9,6 @@ * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 3b49f9ed2e2b..1bce16cc6b20 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Renesas r8a7778 * @@ -8,10 +9,6 @@ * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7778-clock.h> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 4b9006bac3cb..a4d0038363f0 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Marzen board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index e79ae306eedd..6b997bc016ee 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Renesas r8a7779 * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7779-clock.h> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 092610e3f953..50312e752e2f 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Lager board * * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. * Copyright (C) 2015-2016 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 4d06b154bd7e..0925bdca438f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7790 SoC * * Copyright (C) 2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7790-cpg-mssr.h> @@ -79,12 +76,12 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1300000000>; - voltage-tolerance = <1>; /* 1% */ clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; - clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7790_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ /* kHz - uV - OPPs unknown yet */ operating-points = <1400000 1000000>, @@ -104,6 +101,16 @@ power-domains = <&sysc R8A7790_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu2: cpu@2 { @@ -115,6 +122,16 @@ power-domains = <&sysc R8A7790_PD_CA15_CPU2>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu3: cpu@3 { @@ -126,6 +143,16 @@ power-domains = <&sysc R8A7790_PD_CA15_CPU3>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu4: cpu@100 { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 8ab793d8b2fd..ce22db01fbba 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Koelsch board * * Copyright (C) 2013 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index a01101b49d99..f02036e5de01 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Porter board * * Copyright (C) 2015 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* @@ -375,10 +372,43 @@ clock-frequency = <400000>; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; + + pmic@5a { + compatible = "dlg,da9063l"; + reg = <0x5a>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + + vdd_dvfs: regulator@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + &sata0 { status = "okay"; }; +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + /* composite video input */ &vin0 { status = "okay"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6e1dd7ad7bd6..991ac6feedd5 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7791 SoC * * Copyright (C) 2013-2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7791-cpg-mssr.h> @@ -78,11 +75,11 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1500000000>; - voltage-tolerance = <1>; /* 1% */ clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; - clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7791_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -101,6 +98,16 @@ clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; power-domains = <&sysc R8A7791_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; }; L2_CA15: cache-controller-0 { diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index 04fb70931b3b..f92301290b02 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Blanche board * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts index db01de7a3811..f46f4567b3d4 100644 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Wheat board * * Copyright (C) 2016 Renesas Electronics Corporation * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index f44257dd86f6..63a978ec81cc 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7792 SoC * * Copyright (C) 2016 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7792-cpg-mssr.h> diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index aa209f6e5d71..6b2f3a4fd13d 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Gose board * * Copyright (C) 2014-2015 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 4abecfc0ca98..620a570307ff 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7793 SoC * * Copyright (C) 2014-2015 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7793-cpg-mssr.h> @@ -70,10 +67,10 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1500000000>; - voltage-tolerance = <1>; /* 1% */ clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; - clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7793_PD_CA15_CPU0>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -92,6 +89,17 @@ clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; power-domains = <&sysc R8A7793_PD_CA15_CPU1>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; + next-level-cache = <&L2_CA15>; }; L2_CA15: cache-controller-0 { diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index e17027532941..ef7e2a837df6 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Alt board * * Copyright (C) 2014 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 7808aaee6644..daec965889d3 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SILK board * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2014-2015 Renesas Solutions Corp. * Copyright (C) 2014-2015 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 736196903d22..ea2ca4bdaf1c 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7794 SoC * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2014 Ulrich Hecht - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7794-cpg-mssr.h> diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi index 238d14bb0ebe..79fce67ebb1c 100644 --- a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi +++ b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Common file for the AA104XD12 panel connected to Renesas R-Car boards * * Copyright (C) 2014 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi index 04aafd479775..6e7589ea7562 100644 --- a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi +++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Common file for the AA121TD01 panel connected to Renesas R-Car boards * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts new file mode 100644 index 000000000000..4e57ae2688fc --- /dev/null +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZN1D-DB Board + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + */ + +/dts-v1/; + +#include "r9a06g032.dtsi" + +/ { + model = "RZN1D-DB Board"; + compatible = "renesas,rzn1d400-db", "renesas,r9a06g032"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi new file mode 100644 index 000000000000..afe29c95a006 --- /dev/null +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Base Device Tree Source for the Renesas RZ/N1D (R9A06G032) + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "renesas,r9a06g032"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clocks = <&sysctrl 84>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clocks = <&sysctrl 84>; + enable-method = "renesas,r9a06g032-smp"; + cpu-release-addr = <0 0x4000c204>; + }; + }; + + ext_jtag_clk: extjtagclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + ext_mclk: extmclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <40000000>; + }; + + ext_rgmii_ref: extrgmiiref { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + ext_rtc_clk: extrtcclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + sysctrl: system-controller@4000c000 { + compatible = "renesas,r9a06g032-sysctrl"; + reg = <0x4000c000 0x1000>; + status = "okay"; + #clock-cells = <1>; + + clocks = <&ext_mclk>, <&ext_rtc_clk>, + <&ext_jtag_clk>, <&ext_rgmii_ref>; + clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + }; + + uart0: serial@40060000 { + compatible = "snps,dw-apb-uart"; + reg = <0x40060000 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl 146>; + clock-names = "baudclk"; + status = "disabled"; + }; + + gic: gic@44101000 { + compatible = "arm,cortex-a7-gic", "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x44101000 0x1000>, /* Distributer */ + <0x44102000 0x2000>, /* CPU interface */ + <0x44104000 0x2000>, /* Virt interface control */ + <0x44106000 0x2000>; /* Virt CPU interface */ + interrupts = + <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + timer { + compatible = "arm,cortex-a7-timer", + "arm,armv7-timer"; + interrupt-parent = <&gic>; + arm,cpu-registers-not-fw-configured; + always-on; + interrupts = + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index c0953410121b..2a7e6624efb9 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index e2a0f576946f..0fd19f9723df 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 567a6a725f9c..67f57200d9a0 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index ef1eabf2512c..1c925f20dba0 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index d23ee6d911ac..ce525b956ae5 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014 Romain Perier <romain.perier@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 13e285c53def..b6a8a82d219e 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 PaweÅ‚ Jarosz <paweljarosz3691@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 4d7057a10a4c..cd126b927ba8 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 06523caca27d..2ab3c4b32003 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index 8ba9e06062f3..375129b62102 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 00e05a6662ac..45fd2b302dda 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index aa10caae51c3..aa123f93f181 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index 1be9daacc4f9..5670b33fd1bd 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 73e384585755..4df7accc3ad7 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3229.dtsi b/arch/arm/boot/dts/rk3229.dtsi index 6fe6c15fc13a..cb7d3fad8e60 100644 --- a/arch/arm/boot/dts/rk3229.dtsi +++ b/arch/arm/boot/dts/rk3229.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "rk322x.dtsi" diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index be80e9a2c9af..cd8f2a3b0e91 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -80,6 +42,7 @@ reg = <0xf01>; resets = <&cru SRST_CORE1>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ enable-method = "psci"; }; @@ -89,6 +52,7 @@ reg = <0xf02>; resets = <&cru SRST_CORE2>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ enable-method = "psci"; }; @@ -98,6 +62,7 @@ reg = <0xf03>; resets = <&cru SRST_CORE3>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ enable-method = "psci"; }; }; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index b9418d170502..6592c809e2a5 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; #include "rk3288-evb.dtsi" diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 56c266df01c1..16788209625b 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; #include "rk3288-evb.dtsi" diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 39b61dce97ad..97e4d552ff0f 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> @@ -232,7 +194,7 @@ #address-cells = <1>; #size-cells = <0>; - edp_out_panel: endpoint { + edp_out_panel: endpoint@0 { reg = <0>; remote-endpoint = <&panel_in_edp>; }; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index 41405974253a..b1b56dfdfdba 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 0195d9721660..0f3c29d7fbab 100644 --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 5f1e336dbaac..f57f286a93c3 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Firefly Rockchip RK3288 Core board * Copyright (c) 2016 Randy Li <ayaka@soulik.info> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index eab176e3dfc3..58ea8bed040a 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Firefly Rockchip RK3288 Core board * Copyright (c) 2016 Randy Li <ayaka@soulik.info> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts index 14271be72f30..556ab42dd81c 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dts +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index b9e6f3a97240..a6ff7eac4aa8 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 4d923aa6ed11..504ab1177aa7 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts index 985743fa134c..7077c3403483 100644 --- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts +++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Phytec PCM-947 carrier board * Copyright (C) 2017 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index aaab2d171ffe..c218dd54c9b5 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Phytec phyCORE-RK3288 SoM * Copyright (C) 2017 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/net/ti-dp83867.h> diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index c06d0f4ceb81..596435e03132 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 Andy Yan <andy.yan@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index e95215c9788b..28972fb4e221 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 51f36a1b698e..50325489c0ce 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 8ccc89dbdfaf..6a30cadad88a 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts index 127488f9f174..ceade5962899 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dts +++ b/arch/arm/boot/dts/rk3288-tinker.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index 280aceae25d5..eaf921694e68 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Google Veyron (and derivatives) fragment for the max98090 audio * codec and analog headphone jack. * * Copyright 2016 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts index ed4255294ad4..5c94a33d695d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Brain Rev 0 board device tree source * * Copyright 2014 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index b16d570ff029..b54746df3661 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron (and derivatives) board device tree source * Chromebook specific parts * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rockchip,rk808.h> @@ -174,7 +137,7 @@ reg = <1>; #address-cells = <1>; #size-cells = <0>; - edp_out_panel: endpoint { + edp_out_panel: endpoint@0 { reg = <0>; remote-endpoint = <&panel_in_edp>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index d33f5763c39c..9d6814c7f285 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Jaq Rev 1+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index cdea751f2a8c..2ba89895c33a 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Jerry Rev 3+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index f0994f0e5774..1e0158acf895 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Mickey Rev 0 board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 4c5307e62001..f95d0c5fcf71 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Minnie Rev 0+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 995cff42fa43..2950aadf49f0 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Pinky Rev 2 board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index 95e9bee8bca2..a4570444cc79 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron (and derivatives) fragment for sdmmc cards * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &io_domains { diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index cc0b78cefe34..e16421d80d22 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Speedy Rev 1+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 6e5bd8974f22..2075120cfc4d 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron (and derivatives) board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rockchip,rk808.h> @@ -128,22 +91,26 @@ &cpu0 { cpu0-supply = <&vdd_cpu>; - operating-points = < - /* KHz uV */ - 1800000 1400000 - 1704000 1350000 - 1608000 1300000 - 1512000 1250000 - 1416000 1200000 - 1200000 1100000 - 1008000 1050000 - 816000 1000000 - 696000 950000 - 600000 900000 - 408000 900000 - 216000 900000 - 126000 900000 - >; +}; + +/* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */ +&cpu_opp_table { + /delete-node/ opp-312000000; + + opp-1512000000 { + opp-microvolt = <1250000>; + }; + opp-1608000000 { + opp-microvolt = <1300000>; + }; + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <1350000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1400000>; + }; }; &emmc { diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index 14c896bfc639..4856a9fc0aea 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index d7e49d29ace5..0840ffb3205c 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -98,21 +60,7 @@ compatible = "arm,cortex-a12"; reg = <0x500>; resets = <&cru SRST_CORE0>; - operating-points = < - /* KHz uV */ - 1608000 1350000 - 1512000 1300000 - 1416000 1200000 - 1200000 1100000 - 1008000 1050000 - 816000 1000000 - 696000 950000 - 600000 900000 - 408000 900000 - 312000 900000 - 216000 900000 - 126000 900000 - >; + operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -122,18 +70,84 @@ compatible = "arm,cortex-a12"; reg = <0x501>; resets = <&cru SRST_CORE1>; + operating-points = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu2: cpu@502 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x502>; resets = <&cru SRST_CORE2>; + operating-points = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu3: cpu@503 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x503>; resets = <&cru SRST_CORE3>; + operating-points = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; + }; + }; + + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-126000000 { + opp-hz = /bits/ 64 <126000000>; + opp-microvolt = <900000>; + }; + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-microvolt = <900000>; + }; + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <900000>; + }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <900000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000>; + }; + opp-696000000 { + opp-hz = /bits/ 64 <696000000>; + opp-microvolt = <950000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1000000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1050000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1200000>; + }; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1300000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1350000>; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 49584b6a4195..d752dc611fd7 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 70f0106d1252..203d83e3bbf5 100644 --- a/arch/arm/boot/dts/rv1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 76ea24636feb..ed8f6ca52c5b 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi new file mode 100644 index 000000000000..575094ea7024 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's S5PV210 based Galaxy Aries board device tree source + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "s5pv210.dtsi" + +/ { + compatible = "samsung,aries", "samsung,s5pv210"; + + aliases { + i2c6 = &i2c_pmic; + i2c9 = &i2c_fuel; + }; + + memory@30000000 { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x10000000 + 0x50000000 0x08000000>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_gpio_rst>; + post-power-on-delay-ms = <500>; + power-off-delay-us = <500>; + }; + + i2c_pmic: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max8998"; + reg = <0x66>; + interrupt-parent = <&gph0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + max8998,pmic-buck1-default-dvs-idx = <1>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>, + <1050000>, <950000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3600000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* Till we get panel driver */ + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_AF_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo13_reg: LDO13 { + regulator-name = "VGA_VDDIO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VGA_DVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_ISP_HOST_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VGA_AVDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* Till we get panel driver */ + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck1_reg: BUCK1 { + regulator-name = "vddarm"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1250000>; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "vddint"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + cp32khz_reg: EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + }; + }; + }; + }; + + i2c_fuel: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fuelgauge@36 { + compatible = "maxim,max17040"; + interrupt-parent = <&vic0>; + interrupts = <7>; + reg = <0x36>; + }; + }; +}; + +&fimd { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_clk &lcd_data24>; + status = "okay"; + + samsung,invert-vden; + samsung,invert-vclk; + + display-timings { + timing-0 { + /* 480x800@60Hz */ + clock-frequency = <25628040>; + hactive = <480>; + vactive = <800>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vfront-porch = <28>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; +}; + +&hsotg { + vusb_a-supply = <&ldo8_reg>; + vusb_d-supply = <&ldo3_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&pinctrl0 { + wlan_bt_en: wlan-bt-en { + samsung,pins = "gpb-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-val = <1>; + }; + + wlan_gpio_rst: wlan-gpio-rst { + samsung,pins = "gpg1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + + wifi_host_wake: wifi-host-wake { + samsung,pins = "gph2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + tf_detect: tf-detect { + samsung,pins = "gph3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + wifi_wake: wifi-wake { + samsung,pins = "gph3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; +}; + +&sdhci1 { + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + max-frequency = <38400000>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>; + pinctrl-names = "default"; + cap-sd-highspeed; + cap-mmc-highspeed; + + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + status = "okay"; + + wlan@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gph2>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; + vbus-supply = <&safe1_sreg>; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts new file mode 100644 index 000000000000..ccf761b1babf --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "s5pv210-aries.dtsi" + +/ { + model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210"; + compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210"; + + chosen { + stdout-path = &uart2; + /* + * It's hard to change those parameters in stock bootloader, + * since it requires special hardware/cable. + * Let's hardocde bootargs for now, till u-boot port is finished, + * with which it should be easier. + */ + bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "power"; + gpios = <&gph2 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + vol-down { + label = "volume_down"; + gpios = <&gph3 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + vol-up { + label = "volume_up"; + gpios = <&gph3 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts new file mode 100644 index 000000000000..842276749717 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "s5pv210-aries.dtsi" + +/ { + model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210"; + compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210"; + + chosen { + stdout-path = &uart2; + /* + * It's hard to change those parameters in stock bootloader, + * since it requires special hardware/cable. + * Let's hardocde bootargs for now, till u-boot port is finished, + * with which it should be easier. + */ + bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + nand_pwrseq: nand-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpj2 7 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&massmemory_en>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "power"; + gpios = <&gph2 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + vol-down { + label = "volume_down"; + gpios = <&gph3 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + vol-up { + label = "volume_up"; + gpios = <&gph3 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home { + label = "home"; + gpios = <&gph3 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + wakeup-source; + }; + }; +}; + +&pinctrl0 { + massmemory_en: massmemory-en { + samsung,pins = "gpj2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + mmc-pwrseq = <&nand_pwrseq>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi index 3a79feab11c3..7f0c9d447871 100644 --- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -258,6 +258,8 @@ gph2: gph2 { gpio-controller; #gpio-cells = <2>; + + interrupt-controller; #interrupt-cells = <2>; }; diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h index e57191fb83de..1c01a6f843d8 100644 --- a/arch/arm/boot/dts/sama5d2-pinfunc.h +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -375,7 +375,7 @@ #define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0) #define PIN_PB22__LCDDAT11 PINMUX_PIN(PIN_PB22, 1, 1) #define PIN_PB22__A11 PINMUX_PIN(PIN_PB22, 2, 1) -#define PIN_PB22__TDO PINMUX_PIN(PIN_PB22, 3, 1) +#define PIN_PB22__TD0 PINMUX_PIN(PIN_PB22, 3, 1) #define PIN_PB22__TIOA2 PINMUX_PIN(PIN_PB22, 4, 2) #define PIN_PB22__FLEXCOM3_IO1 PINMUX_PIN(PIN_PB22, 5, 3) #define PIN_PB22__GMDC PINMUX_PIN(PIN_PB22, 6, 3) @@ -556,7 +556,7 @@ #define PIN_PC14__LCDDAT6 PINMUX_PIN(PIN_PC14, 1, 2) #define PIN_PC14__GRX0 PINMUX_PIN(PIN_PC14, 2, 1) #define PIN_PC14__ISC_D5 PINMUX_PIN(PIN_PC14, 3, 1) -#define PIN_PC14__TDO PINMUX_PIN(PIN_PC14, 5, 2) +#define PIN_PC14__TD0 PINMUX_PIN(PIN_PC14, 5, 2) #define PIN_PC14__A3 PINMUX_PIN(PIN_PC14, 6, 2) #define PIN_PC15 79 #define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index eae5e1ee9cd8..1408fa4a62e4 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -494,7 +494,7 @@ atmel,external-irqs = <47>; }; - pinctrl@fffff200 { + pinctrl: pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; @@ -1340,13 +1340,13 @@ }; }; - rstc@fffffe00 { + reset_controller: rstc@fffffe00 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; }; - shutdown-controller@fffffe10 { + shutdown_controller: shutdown-controller@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; clocks = <&clk32k>; @@ -1359,7 +1359,7 @@ clocks = <&mck>; }; - watchdog@fffffe40 { + watchdog: watchdog@fffffe40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 0cf9beddd556..92a35a1942b6 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -392,7 +392,7 @@ }; pmc: pmc@f0018000 { - compatible = "atmel,sama5d3-pmc", "syscon"; + compatible = "atmel,sama5d4-pmc", "syscon"; reg = <0xf0018000 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 3d65f1f6d78b..daac0c6078c5 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the KZM-A9-GT board * @@ -5,10 +6,6 @@ * * Based on sh73a0-kzm9g.dts * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index c953648a5f41..e8f0a07c4564 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SH73A0 SoC * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/sh73a0-clock.h> diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 791ca15c799e..a4dcb68f4322 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -587,6 +587,18 @@ status = "disabled"; }; + spi0: spi@ffda4000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda4000 0x100>; + interrupts = <0 101 4>; + num-cs = <4>; + /*32bit_access;*/ + clocks = <&spi_m_clk>; + status = "disabled"; + }; + spi1: spi@ffda5000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 733678b75b88..fca76a696d9d 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -661,7 +661,6 @@ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; clocks = <&hclksmc>; status = "okay"; - timings = /bits/ 8 <0 0 0 0x10 0x0a 0>; partition@0 { label = "X-Loader(NAND)"; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index ede77e0f1c41..e35d782e7e5f 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -302,7 +302,7 @@ interrupt-parent = <&exti>; interrupts = <17 1>; interrupt-names = "alarm"; - st,syscfg = <&pwrcfg>; + st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; @@ -310,6 +310,7 @@ compatible = "st,stm32-iwdg"; reg = <0x40003000 0x400>; clocks = <&clk_lsi>; + clock-names = "lsi"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 1479e3eb05fa..f48d06a80d1d 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -297,7 +297,7 @@ interrupt-parent = <&exti>; interrupts = <17 1>; interrupt-names = "alarm"; - st,syscfg = <&pwrcfg>; + st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 4839db146890..c4851271e810 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -157,6 +157,52 @@ }; }; + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -187,6 +233,19 @@ }; }; + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + pwm2_pins_a: pwm2-0 { pins { pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ @@ -281,7 +340,6 @@ pins-are-numbered; interrupt-parent = <&exti>; st,syscfg = <&exti 0x60 0xff>; - status = "disabled"; gpioz: gpio@54004000 { gpio-controller; @@ -305,6 +363,21 @@ slew-rate = <0>; }; }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index ae336530b59b..f77bea49c079 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -49,10 +49,27 @@ }; }; +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + &rng1 { status = "okay"; }; +&rtc { + status = "okay"; +}; + &timers6 { status = "okay"; timer@5 { @@ -60,14 +77,6 @@ }; }; -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; -}; - &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 9382d8063031..372bc2ea6b92 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -17,6 +17,26 @@ aliases { serial0 = &uart4; + ethernet0 = ðernet0; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; @@ -42,6 +62,12 @@ status = "okay"; }; +&m_can1 { + pinctrl-names = "default"; + pinctrl-0 = <&m_can1_pins_a>; + status = "okay"; +}; + &qspi { pinctrl-names = "default"; pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; @@ -67,6 +93,12 @@ }; }; +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + status = "disabled"; +}; + &timers2 { status = "disabled"; pwm { @@ -103,6 +135,19 @@ }; }; +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + &usbphyc { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 7d1753893453..661be948ab74 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -35,20 +35,6 @@ cpu_on = <0x84000003>; }; - aliases { - gpio0 = &gpioa; - gpio1 = &gpiob; - gpio2 = &gpioc; - gpio3 = &gpiod; - gpio4 = &gpioe; - gpio5 = &gpiof; - gpio6 = &gpiog; - gpio7 = &gpioh; - gpio8 = &gpioi; - gpio9 = &gpioj; - gpio10 = &gpiok; - }; - intc: interrupt-controller@a0021000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; @@ -311,6 +297,34 @@ }; }; + spi2: spi@4000b000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI2_K>; + resets = <&rcc SPI2_R>; + dmas = <&dmamux1 39 0x400 0x05>, + <&dmamux1 40 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi3: spi@4000c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI3_K>; + resets = <&rcc SPI3_R>; + dmas = <&dmamux1 61 0x400 0x05>, + <&dmamux1 62 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; @@ -494,6 +508,34 @@ status = "disabled"; }; + spi1: spi@44004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI1_K>; + resets = <&rcc SPI1_R>; + dmas = <&dmamux1 37 0x400 0x05>, + <&dmamux1 38 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi4: spi@44005000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44005000 0x400>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI4_K>; + resets = <&rcc SPI4_R>; + dmas = <&dmamux1 83 0x400 0x05>, + <&dmamux1 84 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + timers15: timer@44006000 { #address-cells = <1>; #size-cells = <0>; @@ -556,6 +598,116 @@ }; }; + spi5: spi@44009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44009000 0x400>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI5_K>; + resets = <&rcc SPI5_R>; + dmas = <&dmamux1 85 0x400 0x05>, + <&dmamux1 86 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + dfsdm: dfsdm@4400d000 { + compatible = "st,stm32mp1-dfsdm"; + reg = <0x4400d000 0x800>; + clocks = <&rcc DFSDM_K>; + clock-names = "dfsdm"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + dfsdm0: filter@0 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 101 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm1: filter@1 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <1>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 102 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm2: filter@2 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <2>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 103 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm3: filter@3 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <3>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 104 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm4: filter@4 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <4>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 91 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm5: filter@5 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <5>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 92 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + }; + + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + dma1: dma@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; @@ -600,6 +752,57 @@ clocks = <&rcc DMAMUX>; }; + adc: adc@48003000 { + compatible = "st,stm32mp1-adc-core"; + reg = <0x48003000 0x400>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC12>, <&rcc ADC12_K>; + clock-names = "bus", "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + interrupt-parent = <&adc>; + interrupts = <0>; + dmas = <&dmamux1 9 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + adc2: adc@100 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + interrupt-parent = <&adc>; + interrupts = <1>; + dmas = <&dmamux1 10 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + }; + + usbotg_hs: usb-otg@49000000 { + compatible = "snps,dwc2"; + reg = <0x49000000 0x10000>; + clocks = <&rcc USBO_K>; + clock-names = "otg"; + resets = <&rcc USBO_R>; + reset-names = "dwc2"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <128 128 64 64 64 64 32 32>; + dr_mode = "otg"; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -614,6 +817,11 @@ reg = <0x5000d000 0x400>; }; + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; + reg = <0x50020000 0x400>; + }; + lptimer2: timer@50021000 { #address-cells = <1>; #size-cells = <0>; @@ -709,6 +917,18 @@ status = "disabled"; }; + hash1: hash@54002000 { + compatible = "st,stm32f756-hash"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc HASH1>; + resets = <&rcc HASH1_R>; + dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0 0x0>; + dma-names = "in"; + dma-maxburst = <2>; + status = "disabled"; + }; + rng1: rng@54003000 { compatible = "st,stm32-rng"; reg = <0x54003000 0x400>; @@ -744,6 +964,36 @@ status = "disabled"; }; + stmmac_axi_config_0: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "syscfg-clk"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc SYSCFG>; + st,syscon = <&syscfg 0x4>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + status = "disabled"; + }; + usbh_ohci: usbh-ohci@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; @@ -784,6 +1034,14 @@ status = "disabled"; }; + iwdg2: watchdog@5a002000 { + compatible = "st,stm32mp1-iwdg"; + reg = <0x5a002000 0x400>; + clocks = <&rcc IWDG2>, <&rcc CK_LSI>; + clock-names = "pclk", "lsi"; + status = "disabled"; + }; + usbphyc: usbphyc@5a006000 { #address-cells = <1>; #size-cells = <0>; @@ -812,6 +1070,20 @@ status = "disabled"; }; + spi6: spi@5c001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x5c001000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI6_K>; + resets = <&rcc SPI6_R>; + dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0>, + <&mdma1 35 0x0 0x40002 0x0 0x0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2c4: i2c@5c002000 { compatible = "st,stm32f7-i2c"; reg = <0x5c002000 0x400>; @@ -825,6 +1097,15 @@ status = "disabled"; }; + rtc: rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + clocks = <&rcc RTCAPB>, <&rcc RTC>; + clock-names = "pclk", "rtc_ck"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c6: i2c@5c009000 { compatible = "st,stm32f7-i2c"; reg = <0x5c009000 0x400>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 3a1c6b45c9a1..3d62a8950720 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -190,8 +190,8 @@ #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun4i-a10-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -1001,6 +1001,27 @@ status = "disabled"; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun4i-a10-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <69>, + <70>, + <71>, + <72>, + <73>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pmu"; + clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + fe0: display-frontend@1e00000 { compatible = "allwinner,sun4i-a10-display-frontend"; reg = <0x01e00000 0x20000>; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 07f2248ed5f8..8bfb36651177 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -114,8 +114,8 @@ #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun5i-a13-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -127,12 +127,13 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00000000 0xc000>; - }; - emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; - reg = <0x8000 0x4000>; - status = "disabled"; + emac_sram: sram-section@8000 { + compatible = "allwinner,sun5i-a13-sram-a3-a4", + "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; }; sram_d: sram@10000 { @@ -143,11 +144,26 @@ ranges = <0 0x00010000 0x1000>; otg_sram: sram-section@0 { - compatible = "allwinner,sun4i-a10-sram-d"; + compatible = "allwinner,sun5i-a13-sram-d", + "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun5i-a13-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; dma: dma-controller@1c02000 { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index c72992556a86..debc0bf22ea3 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -119,18 +119,48 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index e529e4ff2174..9c52712af241 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -122,6 +122,19 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1300000 + 720000 1200000 + 528000 1100000 + 312000 1000000 + 144000 1000000 + >; + #cooling-cells = <2>; }; }; @@ -239,8 +252,9 @@ #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun7i-a20-system-control", + "allwinner,sun4i-a10-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -254,7 +268,8 @@ ranges = <0 0x00000000 0xc000>; emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; + compatible = "allwinner,sun7i-a20-sram-a3-a4", + "allwinner,sun4i-a10-sram-a3-a4"; reg = <0x8000 0x4000>; status = "disabled"; }; @@ -268,11 +283,26 @@ ranges = <0 0x00010000 0x1000>; otg_sram: sram-section@0 { - compatible = "allwinner,sun4i-a10-sram-d"; + compatible = "allwinner,sun7i-a20-sram-d", + "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun7i-a20-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; nmi_intc: interrupt-controller@1c00030 { diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 44f3cad3de75..c16ffcc4db7d 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -124,6 +124,28 @@ #size-cells = <1>; ranges; + system-control@1c00000 { + compatible = "allwinner,sun8i-a23-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0x80000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-a23-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-a23-dma"; reg = <0x01c02000 0x1000>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 8d278ee001e9..4e92741b24a7 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -132,21 +132,30 @@ }; cpu@1 { + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 36ecebaff3c0..1c012a4def16 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -79,6 +79,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 3b579d7567c8..c7ce4158d6c8 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -107,6 +107,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &de { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index 88decb0747ac..e5f0645e53a7 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -145,6 +145,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { /* GL830 USB-to-SATA bridge here */ status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 2be23d600957..00a02b037320 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -902,8 +902,6 @@ reset-names = "stmmaceth"; clocks = <&ccu 27>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; mdio: mdio { diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 7d01f9322658..1db2541135a7 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -48,6 +48,23 @@ }; }; + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + + gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ + enable-active-high; + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -55,6 +72,10 @@ }; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index cf1f970b0c6f..5d23667dc2d2 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -123,6 +123,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 41d57c76f290..f0096074a467 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -84,21 +84,30 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; @@ -111,6 +120,28 @@ }; soc { + system-control@1c00000 { + compatible = "allwinner,sun8i-h3-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0x80000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-h3-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + mali: gpu@1c40000 { compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; reg = <0x01c40000 0x10000>; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 25fb048c7df2..c39b9169ea64 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -59,6 +59,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -94,6 +105,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -118,6 +133,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -226,6 +251,10 @@ regulator-name = "vcc-wifi"; }; +&tcon_tv0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index bd97ca3dc2fa..ffd9f00f74a4 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -42,8 +42,10 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r40-ccu.h> #include <dt-bindings/reset/sun8i-r40-ccu.h> +#include <dt-bindings/reset/sun8i-de2.h> / { #address-cells = <1>; @@ -99,12 +101,75 @@ }; }; + de: display-engine { + compatible = "allwinner,sun8i-r40-display-engine"; + allwinner,pipelines = <&mixer0>, <&mixer1>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + display_clocks: clock@1000000 { + compatible = "allwinner,sun8i-r40-de2-clk", + "allwinner,sun8i-h3-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-r40-de2-mixer-0"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + mixer0_out_tcon_top: endpoint { + remote-endpoint = <&tcon_top_mixer0_in_mixer0>; + }; + }; + }; + }; + + mixer1: mixer@1200000 { + compatible = "allwinner,sun8i-r40-de2-mixer-1"; + reg = <0x01200000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER1>, + <&display_clocks CLK_MIXER1>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_WB>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer1_out: port@1 { + reg = <1>; + mixer1_out_tcon_top: endpoint { + remote-endpoint = <&tcon_top_mixer1_in_mixer1>; + }; + }; + }; + }; + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; @@ -474,8 +539,6 @@ reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_GMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; gmac_mdio: mdio { @@ -485,6 +548,213 @@ }; }; + tcon_top: tcon-top@1c70000 { + compatible = "allwinner,sun8i-r40-tcon-top"; + reg = <0x01c70000 0x1000>; + clocks = <&ccu CLK_BUS_TCON_TOP>, + <&ccu CLK_TCON_TV0>, + <&ccu CLK_TVE0>, + <&ccu CLK_TCON_TV1>, + <&ccu CLK_TVE1>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", + "tcon-tv0", + "tve0", + "tcon-tv1", + "tve1", + "dsi"; + clock-output-names = "tcon-top-tv0", + "tcon-top-tv1", + "tcon-top-dsi"; + resets = <&ccu RST_BUS_TCON_TOP>; + #clock-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_top_mixer0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon_top>; + }; + }; + + tcon_top_mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_top_mixer0_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer0_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer0_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>; + }; + + tcon_top_mixer0_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer1_in: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tcon_top_mixer1_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon_top>; + }; + }; + + tcon_top_mixer1_out: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tcon_top_mixer1_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer1_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer1_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>; + }; + + tcon_top_mixer1_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>; + }; + }; + + tcon_top_hdmi_in: port@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + tcon_top_hdmi_in_tcon_tv0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_tv0_out_tcon_top>; + }; + + tcon_top_hdmi_in_tcon_tv1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_tv1_out_tcon_top>; + }; + }; + + tcon_top_hdmi_out: port@5 { + reg = <5>; + + tcon_top_hdmi_out_hdmi: endpoint { + remote-endpoint = <&hdmi_in_tcon_top>; + }; + }; + }; + }; + + tcon_tv0: lcd-controller@1c73000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c73000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV0>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_tv0_in_tcon_top_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; + }; + + tcon_tv0_in_tcon_top_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>; + }; + }; + + tcon_tv0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_tv0_out_tcon_top: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; + }; + }; + }; + }; + + tcon_tv1: lcd-controller@1c74000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c74000 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV1>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_tv1_in_tcon_top_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>; + }; + + tcon_tv1_in_tcon_top_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>; + }; + }; + + tcon_tv1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_tv1_out_tcon_top: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>; + }; + }; + }; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, @@ -495,6 +765,51 @@ #interrupt-cells = <3>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + + hdmi: hdmi@1ee0000 { + compatible = "allwinner,sun8i-r40-dw-hdmi", + "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon_top: endpoint { + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun8i-r40-hdmi-phy", + "allwinner,sun50i-a64-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, + <&ccu 7>, <&ccu 16>; + clock-names = "bus", "mod", "pll-0", "pll-1"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; }; timer { diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index c3bff1105e5d..fc6131315c47 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -506,8 +506,6 @@ reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; mdio: mdio { diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi index f7ffdd6658a2..1eadc132390c 100644 --- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi @@ -178,6 +178,15 @@ status = "okay"; }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc_io>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &ohci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index eafff16765b4..1788556b4977 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -23,7 +23,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 7ed7370ee67a..3d3835591cd2 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -28,7 +28,7 @@ }; }; - memory { + memory@80000000 { /* memory >= 0x79600000 is reserved for firmware usage */ reg = <0x80000000 0x79600000>; }; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 7fc4a8b31e45..bfdd1bf61816 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -28,7 +28,7 @@ }; }; - memory { + memory@80000000 { /* memory >= 0x37e00000 is reserved for firmware usage */ reg = <0x80000000 0x37e00000>; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 84c4358dacac..0d7a6327e404 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -5,11 +5,16 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra114"; interrupt-parent = <&lic>; + #address-cells = <1>; + #size-cells = <1>; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x0>; + }; host1x@50000000 { compatible = "nvidia,tegra114-host1x", "simple-bus"; diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index 3455822350c5..573aaa50fff1 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -15,7 +15,7 @@ compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1", "nvidia,tegra124"; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 9f960c84ba10..0f0d4a4988b9 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -50,7 +50,7 @@ model = "Toradex Apalis TK1"; compatible = "toradex,apalis-tk1", "nvidia,tegra124"; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 6dbcf84dafbc..9151b3ebb839 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -24,7 +24,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 3609367037a6..d5f11d6d987e 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -13,7 +13,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 89bcc178994d..82d139648ef1 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 174092bfac90..183c5acafb22 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -7,14 +7,17 @@ #include <dt-bindings/reset/tegra124-car.h> #include <dt-bindings/thermal/tegra124-soctherm.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra124"; interrupt-parent = <&lic>; #address-cells = <2>; #size-cells = <2>; + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x0>; + }; + pcie@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts index 40126388946d..57f16c0e9917 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts @@ -1,10 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "tegra20-colibri-512.dtsi" +#include "tegra20-colibri.dtsi" / { - model = "Toradex Colibri T20 512MB on Iris"; + model = "Toradex Colibri T20 256/512 MB on Iris"; compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20"; aliases { diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi index 5c202b3e3bb1..e7b9ab09908a 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri.dtsi @@ -2,7 +2,7 @@ #include "tegra20.dtsi" / { - model = "Toradex Colibri T20 512MB"; + model = "Toradex Colibri T20 256/512 MB"; compatible = "toradex,colibri_t20-512", "nvidia,tegra20"; aliases { @@ -10,8 +10,13 @@ rtc1 = "/rtc@7000e000"; }; - memory { - reg = <0x00000000 0x20000000>; + memory@0 { + /* + * Set memory to 256 MB to be safe as this could be used on + * 256 or 512 MB module. It is expected from bootloader + * to fix this up for 512 MB version. + */ + reg = <0x00000000 0x10000000>; }; host1x@50000000 { @@ -213,6 +218,22 @@ GPIO_ACTIVE_HIGH>; }; + nand-controller@70008000 { + status = "okay"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <8>; + nand-on-flash-bbt; + nand-ecc-algo = "bch"; + nand-is-boot-medium; + nand-ecc-maximize; + wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; + }; + }; + /* * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier * board) diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 628a55a9318b..1d96d92b72a7 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 30436969adc0..ef245291924f 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -19,7 +19,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 284aae351ff2..f91441683aad 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 872046d48709..20137fc578b1 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -15,7 +15,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index d55c6b240a30..9eb26dc15f6b 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index ee3fbf941e79..f44551e2d9d0 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 983dd5c14794..15b73bd377f0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -1,14 +1,20 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/clock/tegra20-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra20-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra20"; interrupt-parent = <&lic>; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + device_type = "memory"; + reg = <0 0>; + }; iram@40000000 { compatible = "mmio-sram"; @@ -282,7 +288,8 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ interrupt-names = "sync-token", "bsev", "sxe"; clocks = <&tegra_car TEGRA20_CLK_VDE>; - resets = <&tegra_car 61>; + reset-names = "vde", "mc"; + resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>; }; apbmisc@70000800 { @@ -425,6 +432,21 @@ status = "disabled"; }; + nand-controller@70008000 { + compatible = "nvidia,tegra20-nand"; + reg = <0x70008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_NDFLASH>; + clock-names = "nand"; + resets = <&tegra_car 13>; + reset-names = "nand"; + assigned-clocks = <&tegra_car TEGRA20_CLK_NDFLASH>; + assigned-clock-rates = <150000000>; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; @@ -593,11 +615,12 @@ clock-names = "pclk", "clk32k_in"; }; - memory-controller@7000f000 { + mc: memory-controller@7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; }; iommu@7000f024 { diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index d1d21ec2a844..2f807d40c1b7 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -10,6 +10,10 @@ model = "Toradex Apalis T30"; compatible = "toradex,apalis_t30", "nvidia,tegra30"; + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + pcie@3000 { avdd-pexa-supply = <&vdd2_reg>; vdd-pexa-supply = <&vdd2_reg>; @@ -118,6 +122,7 @@ nvidia,function = "spi4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* CAN_INT2 */ spi2_cs2_n_pw3 { @@ -585,8 +590,6 @@ /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x41>; interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio>; @@ -595,7 +598,7 @@ blocks = <0x5>; irq-trigger = <0x1>; - stmpe_touchscreen@0 { + stmpe_touchscreen { compatible = "st,stmpe-ts"; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index ae52a5039506..b0d40ac8ac6e 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x80000000 0x7ff00000>; }; @@ -1790,9 +1790,6 @@ vccio-supply = <&vdd_5v_in_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - vdd1_reg: vdd1 { regulator-name = "vddio_ddr_1v2"; regulator-min-microvolt = <1200000>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 92a9740c533f..fb9222b479d2 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -40,7 +40,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -206,6 +206,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index c44d8c40c410..526ed71cf7a3 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -10,7 +10,7 @@ model = "Toradex Colibri T30"; compatible = "toradex,colibri_t30", "nvidia,tegra30"; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -351,8 +351,6 @@ /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x41>; interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 09087b9c5e26..a6781f653310 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -5,11 +5,16 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra30"; interrupt-parent = <&lic>; + #address-cells = <1>; + #size-cells = <1>; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x0>; + }; pcie@3000 { compatible = "nvidia,tegra30-pcie"; @@ -404,7 +409,8 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ interrupt-names = "sync-token", "bsev", "sxe"; clocks = <&tegra_car TEGRA30_CLK_VDE>; - resets = <&tegra_car 61>; + reset-names = "vde", "mc"; + resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>; }; apbmisc@70000800 { @@ -712,6 +718,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; + #reset-cells = <1>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 641d96119d4f..e2d1a22c5950 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -36,6 +36,7 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -46,6 +47,7 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -56,6 +58,7 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts new file mode 100644 index 000000000000..37777cf22e67 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 CFU1 Board"; + compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + + led-fail { + label = "zii:red:fail"; + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + max-brightness = <1>; + }; + + led-status { + label = "zii:green:status"; + gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + led-debug-a { + label = "zii:green:debug_a"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + led-debug-b { + label = "zii:green:debug_b"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6085"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + reg = <0>; + eeprom-length = <512>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "eth_cu_1000_1"; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_2"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_3"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + label = "nvm"; + }; + + at24c04@54 { + compatible = "atmel,24c04"; + reg = <0x54>; + label = "nameplate"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30fe + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + VF610_PAD_PTE3__GPIO_108 0x31c2 + VF610_PAD_PTE4__GPIO_109 0x31c2 + VF610_PAD_PTE5__GPIO_110 0x31c2 + VF610_PAD_PTE6__GPIO_111 0x31c2 + >; + }; + + pinctrl_switch: switch-grp { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x3061 + VF610_PAD_PTE2__GPIO_107 0x1042 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts new file mode 100644 index 000000000000..fe357668865b --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Device tree file for ZII's SSMB SPU3 board + * + * SSMB - SPU3 Switch Management Board + * SPU - Seat Power Unit + * + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SSMB SPU3 Board"; + compatible = "zii,vf610spu3", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + /* + * Some SPU3s come with SPI-NOR chip DNPed, so we leave this + * node disabled by default and rely on bootloader to enable + * it when appropriate. + */ + status = "disabled"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; + reg = <0>; + eeprom-length = <65536>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_1"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_1000_3"; + }; + + port@4 { + reg = <4>; + label = "eth_cu_1000_4"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_5"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_6"; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio6: pca9505@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "nameplate"; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts index 1a0f631c1d8d..8b9ab9bba23b 100644 --- a/arch/arm/boot/dts/zynq-cc108.dts +++ b/arch/arm/boot/dts/zynq-cc108.dts @@ -12,8 +12,8 @@ /include/ "zynq-7000.dtsi" / { + model = "Xilinx CC108 board"; compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { ethernet0 = &gem0; diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts index aa4a0b6defb8..6ed84fb15902 100644 --- a/arch/arm/boot/dts/zynq-microzed.dts +++ b/arch/arm/boot/dts/zynq-microzed.dts @@ -7,8 +7,8 @@ /include/ "zynq-7000.dtsi" / { - model = "Zynq MicroZED Development Board"; - compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; + model = "Avnet MicroZed board"; + compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index c05f4b67d4c1..54592aeb92b9 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -12,7 +12,7 @@ /include/ "zynq-7000.dtsi" / { - model = "Adapteva Parallella Board"; + model = "Adapteva Parallella board"; compatible = "adapteva,parallella", "xlnx,zynq-7000"; aliases { diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index f2330b0cb63d..cc5a3dc2b4a0 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -7,13 +7,14 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC702 Development Board"; + model = "Xilinx ZC702 board"; compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { @@ -28,8 +29,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw14 { label = "sw14"; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 3ad1260ff2a1..77943c16d33f 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -7,13 +7,14 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC706 Development Board"; + model = "Xilinx ZC706 board"; compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts index 6884f1ad66b7..0e1bfdd3421f 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm010.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM010 board"; compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { ethernet0 = &gem0; diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts index b78883cee96a..b7f65862c022 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm011.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM011 board"; compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts index c3169d63600d..d2359b789eb8 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm012.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm012.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM012 board"; compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { i2c0 = &i2c0; diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts index 8bb66859d774..651913f1afa2 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm013.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM013 board"; compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { ethernet0 = &gem1; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 53c6883ce1f6..6a5a93aa6552 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -7,12 +7,13 @@ #include "zynq-7000.dtsi" / { - model = "Zynq Zed Development Board"; - compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; + model = "Avnet ZedBoard board"; + compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts new file mode 100644 index 000000000000..b38704657960 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zturn.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com> + * Copyright (C) 2017 Alexander Graf <agraf@suse.de> + * + * Based on zynq-zed.dts which is: + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + */ + +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq Z-Turn MYIR Board"; + compatible = "myir,zynq-zturn", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + serial1 = &uart0; + mmc0 = &sdhci0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + usr-led1 { + label = "usr-led1"; + gpios = <&gpio0 0x0 0x1>; + default-state = "off"; + }; + + usr-led2 { + label = "usr-led2"; + gpios = <&gpio0 0x9 0x1>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + K1 { + label = "K1"; + gpios = <&gpio0 0x32 0x1>; + linux,code = <0x66>; + gpio-key,wakeup; + autorepeat; + }; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0x0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&can0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + stlm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; + + accelerometer@53 { + compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x"; + reg = <0x53>; + interrupt-parent = <&intc>; + interrupts = <0x0 0x1e 0x4>; + }; +}; diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts index 1e713dc98920..357b78a5c11b 100644 --- a/arch/arm/boot/dts/zynq-zybo-z7.dts +++ b/arch/arm/boot/dts/zynq-zybo-z7.dts @@ -1,9 +1,10 @@ // SPDX-License-Identifier: GPL-2.0+ /dts-v1/; #include "zynq-7000.dtsi" +#include <dt-bindings/gpio/gpio.h> / { - model = "Zynq ZYBO Z7 Development Board"; + model = "Digilent Zybo Z7 board"; compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000"; aliases { @@ -13,7 +14,7 @@ memory@0 { device_type = "memory"; - reg = <0x0 0x20000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -21,10 +22,19 @@ stdout-path = "serial0:115200n8"; }; + gpio-leds { + compatible = "gpio-leds"; + + ld4 { + label = "zynq-zybo-z7:green:ld4"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + }; + usb_phy0: phy0 { #phy-cells = <0>; compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio0 46 1>; + reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index a6c00e7fa767..755f6f109d5a 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -7,12 +7,13 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZYBO Development Board"; + model = "Digilent Zybo board"; compatible = "digilent,zynq-zybo", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index 95946dee9c77..1446262921b4 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -3,30 +3,39 @@ CONFIG_KERNEL_XZ=y CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZO is not set # CONFIG_RD_LZ4 is not set -CONFIG_KALLSYMS_ALL=y -CONFIG_BPF_SYSCALL=y +# CONFIG_UID16 is not set +# CONFIG_SYSFS_SYSCALL is not set # CONFIG_AIO is not set +CONFIG_BPF_SYSCALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y +CONFIG_SLAB_FREELIST_RANDOM=y CONFIG_JUMP_LABEL=y +CONFIG_STRICT_KERNEL_RWX=y CONFIG_GCC_PLUGINS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEBUG_FS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_MQ_IOSCHED_DEADLINE is not set +# CONFIG_MQ_IOSCHED_KYBER is not set # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G4=y CONFIG_VMSPLIT_2G=y CONFIG_AEABI=y -# CONFIG_CPU_SW_DOMAIN_PAN is not set # CONFIG_COMPACTION is not set +CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_SECCOMP=y # CONFIG_ATAGS is not set CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -47,8 +56,14 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_ADVANCED is not set +CONFIG_VLAN_8021Q=y CONFIG_NET_NCSI=y +CONFIG_BPF_STREAM_PARSER=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y @@ -58,11 +73,12 @@ CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_PARTITIONED_MASTER=y CONFIG_MTD_SPI_NOR=y +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set CONFIG_SPI_ASPEED_SMC=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_BLOCK=y -CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_LOOP=y CONFIG_ASPEED_LPC_CTRL=y CONFIG_ASPEED_LPC_SNOOP=y CONFIG_EEPROM_AT24=y @@ -70,18 +86,26 @@ CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y # CONFIG_NET_VENDOR_ALACRITECH is not set # CONFIG_NET_VENDOR_AMAZON is not set +# CONFIG_NET_VENDOR_AQUANTIA is not set # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_AURORA is not set # CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CADENCE is not set +# CONFIG_NET_VENDOR_CAVIUM is not set # CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_CORTINA is not set # CONFIG_NET_VENDOR_EZCHIP is not set CONFIG_FTGMAC100=y # CONFIG_NET_VENDOR_HISILICON is not set +# CONFIG_NET_VENDOR_HUAWEI is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MELLANOX is not set # CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROSEMI is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_NETRONOME is not set +# CONFIG_NET_VENDOR_NI is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set @@ -89,13 +113,20 @@ CONFIG_FTGMAC100=y # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set # CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SOCIONEXT is not set # CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_BROADCOM_PHY=y CONFIG_REALTEK_PHY=y +# CONFIG_USB_NET_DRIVERS is not set # CONFIG_WLAN is not set -# CONFIG_INPUT is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_GPIO_POLLED=y +# CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set @@ -108,15 +139,16 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_ASPEED_VUART=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_ASPEED_KCS_IPMI_BMC=y CONFIG_ASPEED_BT_IPMI_BMC=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y +CONFIG_HW_RANDOM_TIMERIOMEM=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_ASPEED=y +CONFIG_I2C_FSI=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_ASPEED=y @@ -129,19 +161,45 @@ CONFIG_SENSORS_LM75=y CONFIG_SENSORS_NCT7904=y CONFIG_PMBUS=y CONFIG_SENSORS_ADM1275=y +CONFIG_SENSORS_IBM_CFFPS=y +CONFIG_SENSORS_IR35221=y CONFIG_SENSORS_LM25066=y +CONFIG_SENSORS_MAX31785=y CONFIG_SENSORS_UCD9000=y +CONFIG_SENSORS_UCD9200=y CONFIG_SENSORS_TMP421=y +CONFIG_SENSORS_W83773G=y +CONFIG_WATCHDOG_SYSFS=y +CONFIG_DRM=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_GADGET=y +CONFIG_U_SERIAL_CONSOLE=y +CONFIG_USB_ASPEED_VHUB=y +CONFIG_USB_CONFIGFS=y +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_CONFIGFS_F_HID=y +CONFIG_USB_CONFIGFS_F_PRINTER=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PCA955X=y +CONFIG_LEDS_PCA955X_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -150,33 +208,56 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PCF8523=y CONFIG_RTC_DRV_RV8803=y -CONFIG_MAILBOX=y +# CONFIG_VIRTIO_MENU is not set # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_ASPEED_ADC=y +CONFIG_MAX1363=y CONFIG_BMP280=y +CONFIG_FSI=y +CONFIG_FSI_MASTER_GPIO=y +CONFIG_FSI_MASTER_HUB=y +CONFIG_FSI_MASTER_AST_CF=y +CONFIG_FSI_SCOM=y +CONFIG_FSI_SBEFIFO=y CONFIG_FIRMWARE_MEMMAP=y CONFIG_FANOTIFY=y CONFIG_OVERLAY_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y +# CONFIG_JFFS2_FS_WRITEBUFFER is not set CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y CONFIG_UBIFS_FS=y CONFIG_SQUASHFS=y CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y +# CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_REDUCED=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_FS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +# CONFIG_DETECT_HUNG_TASK is not set CONFIG_WQ_WATCHDOG=y +CONFIG_PANIC_ON_OOPS=y CONFIG_PANIC_TIMEOUT=-1 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHED_STACK_END_CHECK=y -CONFIG_STACKTRACE=y -# CONFIG_FTRACE is not set +CONFIG_FUNCTION_TRACER=y +# CONFIG_TRACING_EVENTS_GPIO is not set +# CONFIG_RUNTIME_TESTING_MENU is not set +CONFIG_DEBUG_WX=y CONFIG_DEBUG_USER=y +CONFIG_HARDENED_USERCOPY=y +CONFIG_FORTIFY_SOURCE=y # CONFIG_CRYPTO_ECHAINIV is not set +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_USER_API_HASH=y # CONFIG_CRYPTO_HW is not set # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 8c7ea033cdc2..02fa3a41add5 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -3,40 +3,47 @@ CONFIG_KERNEL_XZ=y CONFIG_SYSVIPC=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZO is not set # CONFIG_RD_LZ4 is not set -CONFIG_KALLSYMS_ALL=y -CONFIG_BPF_SYSCALL=y +# CONFIG_UID16 is not set +# CONFIG_SYSFS_SYSCALL is not set # CONFIG_AIO is not set +CONFIG_BPF_SYSCALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y +CONFIG_SLAB_FREELIST_RANDOM=y CONFIG_JUMP_LABEL=y +CONFIG_STRICT_KERNEL_RWX=y CONFIG_GCC_PLUGINS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEBUG_FS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_MQ_IOSCHED_DEADLINE is not set +# CONFIG_MQ_IOSCHED_KYBER is not set CONFIG_ARCH_MULTI_V6=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G5=y # CONFIG_CACHE_L2X0 is not set CONFIG_VMSPLIT_2G=y -CONFIG_AEABI=y -# CONFIG_CPU_SW_DOMAIN_PAN is not set # CONFIG_COMPACTION is not set +CONFIG_UACCESS_WITH_MEMCPY=y CONFIG_SECCOMP=y # CONFIG_ATAGS is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SUSPEND is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_DIAG=y @@ -49,8 +56,14 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_ADVANCED is not set +CONFIG_VLAN_8021Q=y CONFIG_NET_NCSI=y +CONFIG_BPF_STREAM_PARSER=y # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y @@ -60,11 +73,12 @@ CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_PARTITIONED_MASTER=y CONFIG_MTD_SPI_NOR=y +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set CONFIG_SPI_ASPEED_SMC=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_BLOCK=y -CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_LOOP=y CONFIG_ASPEED_LPC_CTRL=y CONFIG_ASPEED_LPC_SNOOP=y CONFIG_EEPROM_AT24=y @@ -72,18 +86,26 @@ CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y # CONFIG_NET_VENDOR_ALACRITECH is not set # CONFIG_NET_VENDOR_AMAZON is not set +# CONFIG_NET_VENDOR_AQUANTIA is not set # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_AURORA is not set # CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CADENCE is not set +# CONFIG_NET_VENDOR_CAVIUM is not set # CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_CORTINA is not set # CONFIG_NET_VENDOR_EZCHIP is not set CONFIG_FTGMAC100=y # CONFIG_NET_VENDOR_HISILICON is not set +# CONFIG_NET_VENDOR_HUAWEI is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MELLANOX is not set # CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROSEMI is not set # CONFIG_NET_VENDOR_NATSEMI is not set # CONFIG_NET_VENDOR_NETRONOME is not set +# CONFIG_NET_VENDOR_NI is not set # CONFIG_NET_VENDOR_QUALCOMM is not set # CONFIG_NET_VENDOR_RENESAS is not set # CONFIG_NET_VENDOR_ROCKER is not set @@ -91,13 +113,20 @@ CONFIG_FTGMAC100=y # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SOLARFLARE is not set # CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SOCIONEXT is not set # CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_BROADCOM_PHY=y CONFIG_REALTEK_PHY=y +# CONFIG_USB_NET_DRIVERS is not set # CONFIG_WLAN is not set -# CONFIG_INPUT is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_GPIO_POLLED=y +# CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set @@ -110,15 +139,16 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_ASPEED_VUART=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_ASPEED_KCS_IPMI_BMC=y CONFIG_ASPEED_BT_IPMI_BMC=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y +CONFIG_HW_RANDOM_TIMERIOMEM=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA9541=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_ASPEED=y +CONFIG_I2C_FSI=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_ASPEED=y @@ -131,19 +161,45 @@ CONFIG_SENSORS_LM75=y CONFIG_SENSORS_NCT7904=y CONFIG_PMBUS=y CONFIG_SENSORS_ADM1275=y +CONFIG_SENSORS_IBM_CFFPS=y +CONFIG_SENSORS_IR35221=y CONFIG_SENSORS_LM25066=y +CONFIG_SENSORS_MAX31785=y CONFIG_SENSORS_UCD9000=y +CONFIG_SENSORS_UCD9200=y CONFIG_SENSORS_TMP421=y +CONFIG_SENSORS_W83773G=y +CONFIG_WATCHDOG_SYSFS=y +CONFIG_DRM=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_GADGET=y +CONFIG_U_SERIAL_CONSOLE=y +CONFIG_USB_ASPEED_VHUB=y +CONFIG_USB_CONFIGFS=y +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_CONFIGFS_F_HID=y +CONFIG_USB_CONFIGFS_F_PRINTER=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PCA955X=y +CONFIG_LEDS_PCA955X_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -152,33 +208,56 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PCF8523=y CONFIG_RTC_DRV_RV8803=y -CONFIG_MAILBOX=y +# CONFIG_VIRTIO_MENU is not set # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_ASPEED_ADC=y +CONFIG_MAX1363=y CONFIG_BMP280=y +CONFIG_FSI=y +CONFIG_FSI_MASTER_GPIO=y +CONFIG_FSI_MASTER_HUB=y +CONFIG_FSI_MASTER_AST_CF=y +CONFIG_FSI_SCOM=y +CONFIG_FSI_SBEFIFO=y CONFIG_FIRMWARE_MEMMAP=y CONFIG_FANOTIFY=y CONFIG_OVERLAY_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y +# CONFIG_JFFS2_FS_WRITEBUFFER is not set CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y CONFIG_UBIFS_FS=y CONFIG_SQUASHFS=y CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y +# CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_REDUCED=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_FS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +# CONFIG_DETECT_HUNG_TASK is not set CONFIG_WQ_WATCHDOG=y +CONFIG_PANIC_ON_OOPS=y CONFIG_PANIC_TIMEOUT=-1 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHED_STACK_END_CHECK=y -CONFIG_STACKTRACE=y -# CONFIG_FTRACE is not set +CONFIG_FUNCTION_TRACER=y +# CONFIG_TRACING_EVENTS_GPIO is not set +# CONFIG_RUNTIME_TESTING_MENU is not set +CONFIG_DEBUG_WX=y CONFIG_DEBUG_USER=y +CONFIG_HARDENED_USERCOPY=y +CONFIG_FORTIFY_SOURCE=y # CONFIG_CRYPTO_ECHAINIV is not set +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_USER_API_HASH=y # CONFIG_CRYPTO_HW is not set # CONFIG_XZ_DEC_X86 is not set # CONFIG_XZ_DEC_POWERPC is not set diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index e4d188f0a4b4..e9bc88937b1e 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -86,7 +86,7 @@ CONFIG_SPI=y CONFIG_SPI_BCM2835=y CONFIG_SPI_BCM2835AUX=y CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set +CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_THERMAL=y CONFIG_BCM2835_THERMAL=y CONFIG_WATCHDOG=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 21b2d7791df4..07b2eadac3dd 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -31,7 +31,6 @@ CONFIG_MACH_MITYOMAPL138=y CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_DAVINCI_MUX_DEBUG=y CONFIG_DAVINCI_MUX_WARNINGS=y -CONFIG_DAVINCI_RESET_CLOCKS=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_CMA=y @@ -54,6 +53,13 @@ CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_NETFILTER=y +CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_BNEP=m +CONFIG_BT_HIDP=m +CONFIG_BT_LEDS=y +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_LL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_FW_LOADER=m @@ -113,6 +119,7 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=3 CONFIG_SERIAL_8250_RUNTIME_UARTS=3 CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_DEV_BUS=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -153,6 +160,7 @@ CONFIG_TINYDRM_ST7586=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DA8XX=y +CONFIG_BACKLIGHT_PWM=m CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m @@ -212,6 +220,7 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_OMAP=m CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y +CONFIG_COMMON_CLK_PWM=m CONFIG_REMOTEPROC=m CONFIG_DA8XX_REMOTEPROC=m CONFIG_MEMORY=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 200ebda47e0c..e2c127608bcc 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -81,7 +81,6 @@ CONFIG_CAN=y CONFIG_CAN_FLEXCAN=y CONFIG_BT=y CONFIG_BT_HCIUART=y -CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_LL=y CONFIG_CFG80211=y CONFIG_CFG80211_WEXT=y @@ -266,7 +265,8 @@ CONFIG_DRM_IMX_TVE=y CONFIG_DRM_IMX_LDB=y CONFIG_DRM_IMX_HDMI=y CONFIG_DRM_ETNAVIV=y -CONFIG_FB_MXS=y +CONFIG_DRM_MXSFB=y +CONFIG_FB_MODE_HELPERS=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y CONFIG_LCD_PLATFORM=y @@ -282,7 +282,6 @@ CONFIG_SND_SOC_FSL_ASRC=y CONFIG_SND_IMX_SOC=y CONFIG_SND_SOC_PHYCORE_AC97=y CONFIG_SND_SOC_EUKREA_TLV320=y -CONFIG_SND_SOC_IMX_WM8962=y CONFIG_SND_SOC_IMX_ES8328=y CONFIG_SND_SOC_IMX_SGTL5000=y CONFIG_SND_SOC_IMX_SPDIF=y @@ -371,13 +370,16 @@ CONFIG_DMADEVICES=y CONFIG_FSL_EDMA=y CONFIG_IMX_SDMA=y CONFIG_MXS_DMA=y +CONFIG_DMATEST=m CONFIG_STAGING=y CONFIG_STAGING_MEDIA=y CONFIG_VIDEO_IMX_MEDIA=y CONFIG_COMMON_CLK_PWM=y CONFIG_IIO=y +CONFIG_MMA8452=y CONFIG_IMX7D_ADC=y CONFIG_VF610_ADC=y +CONFIG_SENSORS_ISL29018=y CONFIG_MAG3110=y CONFIG_MPL3115=y CONFIG_PWM=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 2536c231eea1..3ded35a07f45 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -170,7 +170,10 @@ CONFIG_USB_DWC3=y CONFIG_NOP_USB_XCEIV=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_OMAP_HS=y +CONFIG_MMC_SDHCI_OMAP=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -235,3 +238,5 @@ CONFIG_INPUT_GPIO_DECODER=m CONFIG_GPIO_PCA953X=m CONFIG_LEDS_TRIGGER_ACTIVITY=y CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_MICREL_PHY=y +CONFIG_DP83867_PHY=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 7c41bee28463..318b76fa26d1 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=19 @@ -11,12 +10,10 @@ CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_MVEBU=y -CONFIG_MACH_KIRKWOOD=y -CONFIG_ARCH_AT91=y -CONFIG_SOC_AT91SAM9=y CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G4=y +CONFIG_ARCH_AT91=y +CONFIG_SOC_AT91SAM9=y CONFIG_ARCH_MXC=y CONFIG_MACH_MX21ADS=y CONFIG_MACH_MX27ADS=y @@ -25,6 +22,8 @@ CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_PCA100=y CONFIG_MACH_IMX27_DT=y CONFIG_SOC_IMX25=y +CONFIG_ARCH_MVEBU=y +CONFIG_MACH_KIRKWOOD=y CONFIG_ARCH_ORION5X=y CONFIG_MACH_DB88F5281=y CONFIG_MACH_RD88F5182=y @@ -34,7 +33,6 @@ CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y -CONFIG_MACH_LINKSTATION_LSCHL=y CONFIG_MACH_LINKSTATION_MINI=y CONFIG_MACH_LINKSTATION_LS_HGL=y CONFIG_MACH_TS409=y @@ -71,7 +69,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_NET_DSA=y -CONFIG_NET_SWITCHDEV=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y @@ -93,10 +90,14 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_ORION=y +CONFIG_MTD_SPI_NOR=y +CONFIG_SPI_ASPEED_SMC=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=m +CONFIG_ASPEED_LPC_CTRL=m +CONFIG_ASPEED_LPC_SNOOP=m CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -110,10 +111,11 @@ CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6XXX=y CONFIG_MACB=y CONFIG_DM9000=y +CONFIG_FTGMAC100=m CONFIG_MV643XX_ETH=y CONFIG_R8169=y -CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y +CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=y @@ -125,23 +127,26 @@ CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=6 CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_ASPEED_VUART=m CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_ATMEL_TTYAT=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_ASPEED_KCS_IPMI_BMC=m +CONFIG_ASPEED_BT_IPMI_BMC=m CONFIG_HW_RANDOM=y -CONFIG_I2C=y +CONFIG_HW_RANDOM_TIMERIOMEM=m # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y +CONFIG_I2C_ASPEED=m CONFIG_I2C_AT91=y CONFIG_I2C_IMX=y CONFIG_I2C_MV64XXX=y @@ -150,10 +155,12 @@ CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_IMX=y CONFIG_SPI_ORION=y +CONFIG_GPIO_ASPEED=m CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y CONFIG_SENSORS_ADT7475=y +CONFIG_SENSORS_ASPEED=y CONFIG_SENSORS_G762=y CONFIG_SENSORS_LM63=y CONFIG_SENSORS_LM75=y @@ -172,11 +179,9 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_VIDEO_ATMEL_ISI=m -CONFIG_SOC_CAMERA_OV2640=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=m CONFIG_DRM_PANEL_SIMPLE=y -CONFIG_FB=y CONFIG_FB_IMX=y CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_ATMEL_LCDC=y @@ -246,6 +251,7 @@ CONFIG_MV_XOR=y CONFIG_STAGING=y CONFIG_FB_XGI=y CONFIG_IIO=m +CONFIG_ASPEED_ADC=m CONFIG_AT91_ADC=m CONFIG_PWM=y CONFIG_PWM_ATMEL=m diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index be732f382418..fc33444e94f0 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -88,6 +88,7 @@ CONFIG_ARCH_R8A7791=y CONFIG_ARCH_R8A7792=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_R9A06G032=y CONFIG_ARCH_SH73A0=y CONFIG_ARCH_SOCFPGA=y CONFIG_PLAT_SPEAR=y @@ -184,6 +185,7 @@ CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_NAND_VF610_NFC=y @@ -243,6 +245,7 @@ CONFIG_KS8851=y CONFIG_R8169=y CONFIG_SH_ETH=y CONFIG_SMSC911X=y +CONFIG_SNI_AVE=y CONFIG_STMMAC_ETH=y CONFIG_DWMAC_DWC_QOS_ETH=y CONFIG_TI_CPSW=y @@ -447,6 +450,7 @@ CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_SENSORS_NTC_THERMISTOR=m CONFIG_SENSORS_PWM_FAN=m +CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_SENSORS_INA2XX=m CONFIG_CPU_THERMAL=y CONFIG_IMX_THERMAL=y @@ -456,6 +460,7 @@ CONFIG_ARMADA_THERMAL=y CONFIG_BCM2835_THERMAL=m CONFIG_BRCMSTB_THERMAL=m CONFIG_ST_THERMAL_MEMMAP=y +CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y CONFIG_DA9063_WATCHDOG=m CONFIG_XILINX_WATCHDOG=y @@ -562,6 +567,7 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_STM32_DCMI=m CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m @@ -825,6 +831,7 @@ CONFIG_RTC_DRV_SUNXI=y CONFIG_RTC_DRV_MV=y CONFIG_RTC_DRV_TEGRA=y CONFIG_RTC_DRV_ST_LPC=y +CONFIG_RTC_DRV_STM32=y CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y @@ -840,6 +847,9 @@ CONFIG_PL330_DMA=y CONFIG_SIRF_DMA=y CONFIG_STE_DMA40=y CONFIG_ST_FDMA=m +CONFIG_STM32_DMA=y +CONFIG_STM32_DMAMUX=y +CONFIG_STM32_MDMA=y CONFIG_TEGRA20_APB_DMA=y CONFIG_XILINX_DMA=y CONFIG_QCOM_BAM_DMA=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index ddaeda4f2e82..55140219ab11 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -16,10 +15,8 @@ CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_PCI=y -CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_SMP=y -CONFIG_AEABI=y CONFIG_HIGHMEM=y # CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -58,7 +55,6 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_SPI_NOR=y -CONFIG_SRAM=y CONFIG_MTD_UBI=y CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y @@ -67,12 +63,11 @@ CONFIG_SATA_AHCI=y CONFIG_AHCI_MVEBU=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_NET_DSA_MV88E6XXX=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_MVPP2=y +CONFIG_SFP=y CONFIG_MARVELL_PHY=y -CONFIG_FIXED_PHY=y CONFIG_MWIFIEX=y CONFIG_MWIFIEX_SDIO=y CONFIG_INPUT_EVDEV=y @@ -88,10 +83,11 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PCA953X=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_SUPPLY=y CONFIG_SENSORS_GPIO_FAN=y +CONFIG_SENSORS_PWM_FAN=y CONFIG_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_WATCHDOG=y @@ -135,7 +131,6 @@ CONFIG_MV_XOR=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_MEMORY=y CONFIG_PWM=y -CONFIG_SENSORS_PWM_FAN=y CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y @@ -153,10 +148,8 @@ CONFIG_NLS_ISO8859_2=y CONFIG_NLS_UTF8=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set -CONFIG_TIMER_STATS=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_USER=y CONFIG_CRYPTO_DEV_MARVELL_CESA=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index a508eb302e7a..148226e36152 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -94,8 +94,9 @@ CONFIG_STMP3XXX_RTC_WATCHDOG=y CONFIG_MFD_MXS_LRADC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_FB=y -CONFIG_FB_MXS=y +CONFIG_DRM=y +CONFIG_DRM_MXSFB=y +CONFIG_FB_MODE_HELPERS=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index dd2a089f939f..6aa7046fb91f 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -57,6 +57,8 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 09b5a7386414..a077597369f1 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -1,5 +1,7 @@ +CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_CGROUPS=y CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y @@ -13,28 +15,68 @@ CONFIG_SOLARIS_X86_PARTITION=y CONFIG_ARCH_S5PV210=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT=y -CONFIG_AEABI=y +CONFIG_ARM_APPENDED_DTB=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" CONFIG_VFP=y CONFIG_NEON=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_CFG80211=m +CONFIG_MAC80211=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +CONFIG_NETDEVICES=y +CONFIG_BRCMFMAC=m CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_HW_RANDOM=y +CONFIG_I2C_GPIO=y +CONFIG_POWER_SUPPLY=y +CONFIG_BATTERY_MAX17040=y # CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_MFD_MAX8998=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_MAX8998=y +CONFIG_DRM=y +CONFIG_DRM_EXYNOS=y +CONFIG_DRM_EXYNOS_FIMD=y +CONFIG_DRM_EXYNOS_DPI=y +CONFIG_USB=y +CONFIG_USB_OTG=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_DWC2=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_SDHCI_S3C_DMA=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MAX8998=m +CONFIG_PHY_SAMSUNG_USB2=m +CONFIG_PHY_S5PV210_USB2=y CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y @@ -44,6 +86,7 @@ CONFIG_ROMFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index b49887e86a3d..f8faf3729464 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -22,6 +22,7 @@ CONFIG_ARCH_R8A7791=y CONFIG_ARCH_R8A7792=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_R9A06G032=y CONFIG_ARCH_SH73A0=y CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_754322=y @@ -57,7 +58,6 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_CAN=y CONFIG_CAN_RCAR=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y @@ -72,22 +72,9 @@ CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CIRRUS is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set CONFIG_SH_ETH=y CONFIG_RAVB=y -# CONFIG_NET_VENDOR_SEEQ is not set CONFIG_SMSC911X=y -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_MICREL_PHY=y CONFIG_SMSC_PHY=y CONFIG_INPUT_EVDEV=y @@ -100,6 +87,7 @@ CONFIG_INPUT_ADXL34X=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_SH_SCI=y CONFIG_I2C_CHARDEV=y @@ -205,6 +193,7 @@ CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_RCAR=y CONFIG_PWM_RENESAS_TPU=y +CONFIG_RESET_CONTROLLER=y CONFIG_GENERIC_PHY=y CONFIG_PHY_RCAR_GEN2=y # CONFIG_DNOTIFY is not set diff --git a/arch/arm/firmware/trusted_foundations.c b/arch/arm/firmware/trusted_foundations.c index 3fb1b5a1dce9..689e6565abfc 100644 --- a/arch/arm/firmware/trusted_foundations.c +++ b/arch/arm/firmware/trusted_foundations.c @@ -31,21 +31,25 @@ static unsigned long cpu_boot_addr; -static void __naked tf_generic_smc(u32 type, u32 arg1, u32 arg2) +static void tf_generic_smc(u32 type, u32 arg1, u32 arg2) { + register u32 r0 asm("r0") = type; + register u32 r1 asm("r1") = arg1; + register u32 r2 asm("r2") = arg2; + asm volatile( ".arch_extension sec\n\t" - "stmfd sp!, {r4 - r11, lr}\n\t" + "stmfd sp!, {r4 - r11}\n\t" __asmeq("%0", "r0") __asmeq("%1", "r1") __asmeq("%2", "r2") "mov r3, #0\n\t" "mov r4, #0\n\t" "smc #0\n\t" - "ldmfd sp!, {r4 - r11, pc}" + "ldmfd sp!, {r4 - r11}\n\t" : - : "r" (type), "r" (arg1), "r" (arg2) - : "memory"); + : "r" (r0), "r" (r1), "r" (r2) + : "memory", "r3", "r12", "lr"); } static int tf_set_cpu_boot_addr(int cpu, unsigned long boot_addr) diff --git a/arch/arm/include/debug/renesas-scif.S b/arch/arm/include/debug/renesas-scif.S index 97820a8df51a..1c5f795587fc 100644 --- a/arch/arm/include/debug/renesas-scif.S +++ b/arch/arm/include/debug/renesas-scif.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Renesas SCIF(A) debugging macro include header * @@ -5,10 +6,6 @@ * * Copyright (C) 2012-2013 Renesas Electronics Corporation * Copyright (C) 1994-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define SCIF_PHYS CONFIG_DEBUG_UART_PHYS diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 849014c01cf4..32fae4dbd63b 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -40,15 +40,16 @@ extern void at91_pinctrl_gpio_resume(void); #endif static const match_table_t pm_modes __initconst = { - { 0, "standby" }, - { AT91_PM_SLOW_CLOCK, "ulp0" }, + { AT91_PM_STANDBY, "standby" }, + { AT91_PM_ULP0, "ulp0" }, + { AT91_PM_ULP1, "ulp1" }, { AT91_PM_BACKUP, "backup" }, { -1, NULL }, }; static struct at91_pm_data pm_data = { - .standby_mode = 0, - .suspend_mode = AT91_PM_SLOW_CLOCK, + .standby_mode = AT91_PM_STANDBY, + .suspend_mode = AT91_PM_ULP0, }; #define at91_ramc_read(id, field) \ @@ -79,6 +80,90 @@ static struct at91_pm_bu { phys_addr_t resume; } *pm_bu; +struct wakeup_source_info { + unsigned int pmc_fsmr_bit; + unsigned int shdwc_mr_bit; + bool set_polarity; +}; + +static const struct wakeup_source_info ws_info[] = { + { .pmc_fsmr_bit = AT91_PMC_FSTT(10), .set_polarity = true }, + { .pmc_fsmr_bit = AT91_PMC_RTCAL, .shdwc_mr_bit = BIT(17) }, + { .pmc_fsmr_bit = AT91_PMC_USBAL }, + { .pmc_fsmr_bit = AT91_PMC_SDMMC_CD }, +}; + +static const struct of_device_id sama5d2_ws_ids[] = { + { .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] }, + { .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] }, + { .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] }, + { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, + { .compatible = "usb-ohci", .data = &ws_info[2] }, + { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, + { .compatible = "usb-ehci", .data = &ws_info[2] }, + { .compatible = "atmel,sama5d2-sdhci", .data = &ws_info[3] }, + { /* sentinel */ } +}; + +static int at91_pm_config_ws(unsigned int pm_mode, bool set) +{ + const struct wakeup_source_info *wsi; + const struct of_device_id *match; + struct platform_device *pdev; + struct device_node *np; + unsigned int mode = 0, polarity = 0, val = 0; + + if (pm_mode != AT91_PM_ULP1) + return 0; + + if (!pm_data.pmc || !pm_data.shdwc) + return -EPERM; + + if (!set) { + writel(mode, pm_data.pmc + AT91_PMC_FSMR); + return 0; + } + + /* SHDWC.WUIR */ + val = readl(pm_data.shdwc + 0x0c); + mode |= (val & 0x3ff); + polarity |= ((val >> 16) & 0x3ff); + + /* SHDWC.MR */ + val = readl(pm_data.shdwc + 0x04); + + /* Loop through defined wakeup sources. */ + for_each_matching_node_and_match(np, sama5d2_ws_ids, &match) { + pdev = of_find_device_by_node(np); + if (!pdev) + continue; + + if (device_may_wakeup(&pdev->dev)) { + wsi = match->data; + + /* Check if enabled on SHDWC. */ + if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit)) + goto put_node; + + mode |= wsi->pmc_fsmr_bit; + if (wsi->set_polarity) + polarity |= wsi->pmc_fsmr_bit; + } + +put_node: + of_node_put(np); + } + + if (mode) { + writel(mode, pm_data.pmc + AT91_PMC_FSMR); + writel(polarity, pm_data.pmc + AT91_PMC_FSPR); + } else { + pr_err("AT91: PM: no ULP1 wakeup sources found!"); + } + + return mode ? 0 : -EPERM; +} + /* * Called after processes are frozen, but before we shutdown devices. */ @@ -97,7 +182,7 @@ static int at91_pm_begin(suspend_state_t state) pm_data.mode = -1; } - return 0; + return at91_pm_config_ws(pm_data.mode, true); } /* @@ -145,7 +230,7 @@ static int at91_pm_verify_clocks(void) */ int at91_suspend_entering_slow_clock(void) { - return (pm_data.mode >= AT91_PM_SLOW_CLOCK); + return (pm_data.mode >= AT91_PM_ULP0); } EXPORT_SYMBOL(at91_suspend_entering_slow_clock); @@ -186,7 +271,7 @@ static void at91_pm_suspend(suspend_state_t state) * event sources; and reduces DRAM power. But otherwise it's identical to * PM_SUSPEND_ON: cpu idle, and nothing fancy done with main or cpu clocks. * - * AT91_PM_SLOW_CLOCK is like STANDBY plus slow clock mode, so drivers must + * AT91_PM_ULP0 is like STANDBY plus slow clock mode, so drivers must * suspend more deeply, the master clock switches to the clk32k and turns off * the main oscillator * @@ -204,7 +289,7 @@ static int at91_pm_enter(suspend_state_t state) /* * Ensure that clocks are in a valid state. */ - if ((pm_data.mode >= AT91_PM_SLOW_CLOCK) && + if (pm_data.mode >= AT91_PM_ULP0 && !at91_pm_verify_clocks()) goto error; @@ -233,6 +318,7 @@ error: */ static void at91_pm_end(void) { + at91_pm_config_ws(pm_data.mode, false); } @@ -478,31 +564,28 @@ static void __init at91_pm_sram_init(void) &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); } -static void __init at91_pm_backup_init(void) +static bool __init at91_is_pm_mode_active(int pm_mode) +{ + return (pm_data.standby_mode == pm_mode || + pm_data.suspend_mode == pm_mode); +} + +static int __init at91_pm_backup_init(void) { struct gen_pool *sram_pool; struct device_node *np; struct platform_device *pdev = NULL; + int ret = -ENODEV; - if ((pm_data.standby_mode != AT91_PM_BACKUP) && - (pm_data.suspend_mode != AT91_PM_BACKUP)) - return; + if (!at91_is_pm_mode_active(AT91_PM_BACKUP)) + return 0; pm_bu = NULL; - np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc"); - if (!np) { - pr_warn("%s: failed to find shdwc!\n", __func__); - return; - } - - pm_data.shdwc = of_iomap(np, 0); - of_node_put(np); - np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu"); if (!np) { pr_warn("%s: failed to find sfrbu!\n", __func__); - goto sfrbu_fail; + return ret; } pm_data.sfrbu = of_iomap(np, 0); @@ -529,6 +612,7 @@ static void __init at91_pm_backup_init(void) pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu)); if (!pm_bu) { pr_warn("%s: unable to alloc securam!\n", __func__); + ret = -ENOMEM; goto securam_fail; } @@ -536,19 +620,60 @@ static void __init at91_pm_backup_init(void) pm_bu->canary = __pa_symbol(&canary); pm_bu->resume = __pa_symbol(cpu_resume); - return; + return 0; -sfrbu_fail: - iounmap(pm_data.shdwc); - pm_data.shdwc = NULL; securam_fail: iounmap(pm_data.sfrbu); pm_data.sfrbu = NULL; + return ret; +} - if (pm_data.standby_mode == AT91_PM_BACKUP) - pm_data.standby_mode = AT91_PM_SLOW_CLOCK; - if (pm_data.suspend_mode == AT91_PM_BACKUP) - pm_data.suspend_mode = AT91_PM_SLOW_CLOCK; +static void __init at91_pm_use_default_mode(int pm_mode) +{ + if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP) + return; + + if (pm_data.standby_mode == pm_mode) + pm_data.standby_mode = AT91_PM_ULP0; + if (pm_data.suspend_mode == pm_mode) + pm_data.suspend_mode = AT91_PM_ULP0; +} + +static void __init at91_pm_modes_init(void) +{ + struct device_node *np; + int ret; + + if (!at91_is_pm_mode_active(AT91_PM_BACKUP) && + !at91_is_pm_mode_active(AT91_PM_ULP1)) + return; + + np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc"); + if (!np) { + pr_warn("%s: failed to find shdwc!\n", __func__); + goto ulp1_default; + } + + pm_data.shdwc = of_iomap(np, 0); + of_node_put(np); + + ret = at91_pm_backup_init(); + if (ret) { + if (!at91_is_pm_mode_active(AT91_PM_ULP1)) + goto unmap; + else + goto backup_default; + } + + return; + +unmap: + iounmap(pm_data.shdwc); + pm_data.shdwc = NULL; +ulp1_default: + at91_pm_use_default_mode(AT91_PM_ULP1); +backup_default: + at91_pm_use_default_mode(AT91_PM_BACKUP); } struct pmc_info { @@ -559,15 +684,20 @@ static const struct pmc_info pmc_infos[] __initconst = { { .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP }, { .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP }, { .uhp_udp_mask = AT91SAM926x_PMC_UHP }, + { .uhp_udp_mask = 0 }, }; static const struct of_device_id atmel_pmc_ids[] __initconst = { { .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] }, { .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] }, + { .compatible = "atmel,at91sam9261-pmc", .data = &pmc_infos[1] }, + { .compatible = "atmel,at91sam9263-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] }, { .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] }, + { .compatible = "atmel,at91sam9rl-pmc", .data = &pmc_infos[3] }, { .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] }, + { .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] }, { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] }, { /* sentinel */ }, }; @@ -644,7 +774,7 @@ void __init sama5d2_pm_init(void) if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) return; - at91_pm_backup_init(); + at91_pm_modes_init(); sama5_pm_init(); } diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index f95d31496f08..9bd4e6ca672a 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -21,8 +21,10 @@ #define AT91_MEMCTRL_SDRAMC 1 #define AT91_MEMCTRL_DDRSDR 2 -#define AT91_PM_SLOW_CLOCK 0x01 -#define AT91_PM_BACKUP 0x02 +#define AT91_PM_STANDBY 0x00 +#define AT91_PM_ULP0 0x01 +#define AT91_PM_ULP1 0x02 +#define AT91_PM_BACKUP 0x03 #ifndef __ASSEMBLY__ struct at91_pm_data { diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index daca91feea6a..a7c6ae13c945 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -42,6 +42,15 @@ tmp2 .req r5 .endm /* + * Wait for main oscillator selection is done + */ + .macro wait_moscsels +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCSELS + beq 1b + .endm + +/* * Wait until PLLA has locked. */ .macro wait_pllalock @@ -112,19 +121,20 @@ ENTRY(at91_pm_suspend_in_sram) bl at91_sramc_self_refresh ldr r0, .pm_mode - cmp r0, #AT91_PM_SLOW_CLOCK - beq slow_clock + cmp r0, #AT91_PM_STANDBY + beq standby cmp r0, #AT91_PM_BACKUP beq backup_mode + bl at91_ulp_mode + b exit_suspend + +standby: /* Wait for interrupt */ ldr pmc, .pmc_base at91_cpu_idle b exit_suspend -slow_clock: - bl at91_slowck_mode - b exit_suspend backup_mode: bl at91_backup_mode b exit_suspend @@ -151,7 +161,102 @@ ENTRY(at91_backup_mode) str tmp1, [r0, #0] ENDPROC(at91_backup_mode) -ENTRY(at91_slowck_mode) +.macro at91_pm_ulp0_mode + ldr pmc, .pmc_base + + /* Turn off the crystal oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + /* Wait for interrupt */ + at91_cpu_idle + + /* Turn on the crystal oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscrdy +.endm + +/** + * Note: This procedure only applies on the platform which uses + * the external crystal oscillator as a main clock source. + */ +.macro at91_pm_ulp1_mode + ldr pmc, .pmc_base + + /* Switch the main clock source to 12-MHz RC oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCSEL + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscsels + + /* Disable the crystal oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCEN + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + /* Switch the master clock source to main clock */ + ldr tmp1, [pmc, #AT91_PMC_MCKR] + bic tmp1, tmp1, #AT91_PMC_CSS + orr tmp1, tmp1, #AT91_PMC_CSS_MAIN + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + + /* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_WAITMODE + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_mckrdy + + /* Enable the crystal oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCEN + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscrdy + + /* Switch the master clock source to slow clock */ + ldr tmp1, [pmc, #AT91_PMC_MCKR] + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + + /* Switch main clock source to crystal oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCSEL + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscsels + + /* Switch the master clock source to main clock */ + ldr tmp1, [pmc, #AT91_PMC_MCKR] + bic tmp1, tmp1, #AT91_PMC_CSS + orr tmp1, tmp1, #AT91_PMC_CSS_MAIN + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy +.endm + +ENTRY(at91_ulp_mode) ldr pmc, .pmc_base /* Save Master clock setting */ @@ -174,22 +279,19 @@ ENTRY(at91_slowck_mode) orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ str tmp1, [pmc, #AT91_CKGR_PLLAR] - /* Turn off the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - bic tmp1, tmp1, #AT91_PMC_MOSCEN - orr tmp1, tmp1, #AT91_PMC_KEY - str tmp1, [pmc, #AT91_CKGR_MOR] + ldr r0, .pm_mode + cmp r0, #AT91_PM_ULP1 + beq ulp1_mode - /* Wait for interrupt */ - at91_cpu_idle + at91_pm_ulp0_mode + b ulp_exit - /* Turn on the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - orr tmp1, tmp1, #AT91_PMC_MOSCEN - orr tmp1, tmp1, #AT91_PMC_KEY - str tmp1, [pmc, #AT91_CKGR_MOR] +ulp1_mode: + at91_pm_ulp1_mode + b ulp_exit - wait_moscrdy +ulp_exit: + ldr pmc, .pmc_base /* Restore PLLA setting */ ldr tmp1, .saved_pllar @@ -212,7 +314,7 @@ ENTRY(at91_slowck_mode) wait_mckrdy mov pc, lr -ENDPROC(at91_slowck_mode) +ENDPROC(at91_ulp_mode) /* * void at91_sramc_self_refresh(unsigned int is_active) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 05c3eecf47cb..da8a039d65f9 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -59,6 +59,7 @@ config MACH_DA8XX_DT default y depends on ARCH_DAVINCI_DA850 select PINCTRL + select TIMER_OF help Say y here to include support for TI DaVinci DA850 based using Flattened Device Tree. More information at Documentation/devicetree @@ -231,18 +232,6 @@ config DAVINCI_MUX_WARNINGS to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect DAVINCI_MUX for your product. -config DAVINCI_RESET_CLOCKS - bool "Reset unused clocks during boot" - depends on ARCH_DAVINCI - help - Say Y if you want to reset unused clocks during boot. - This option saves power, but assumes all drivers are - using the clock framework. Broken drivers that do not - yet use clock framework may not work with this option. - If you are booting from another operating system, you - probably do not want this option enabled until your - device drivers work properly. - endmenu endif diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 4e8178050027..93d271b4d84b 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,8 +5,8 @@ # # Common objects -obj-y := time.o clock.o serial.o psc.o \ - usb.o common.o sram.o aemif.o +obj-y := time.o serial.o usb.o \ + common.o sram.o obj-$(CONFIG_DAVINCI_MUX) += mux.o diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c deleted file mode 100644 index e4ab3f3a2a1f..000000000000 --- a/arch/arm/mach-davinci/aemif.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * AEMIF support for DaVinci SoCs - * - * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/module.h> -#include <linux/time.h> - -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/mtd-davinci.h> - -/* Timing value configuration */ - -#define TA(x) ((x) << 2) -#define RHOLD(x) ((x) << 4) -#define RSTROBE(x) ((x) << 7) -#define RSETUP(x) ((x) << 13) -#define WHOLD(x) ((x) << 17) -#define WSTROBE(x) ((x) << 20) -#define WSETUP(x) ((x) << 26) - -#define TA_MAX 0x3 -#define RHOLD_MAX 0x7 -#define RSTROBE_MAX 0x3f -#define RSETUP_MAX 0xf -#define WHOLD_MAX 0x7 -#define WSTROBE_MAX 0x3f -#define WSETUP_MAX 0xf - -#define TIMING_MASK (TA(TA_MAX) | \ - RHOLD(RHOLD_MAX) | \ - RSTROBE(RSTROBE_MAX) | \ - RSETUP(RSETUP_MAX) | \ - WHOLD(WHOLD_MAX) | \ - WSTROBE(WSTROBE_MAX) | \ - WSETUP(WSETUP_MAX)) - -static inline unsigned int davinci_aemif_readl(void __iomem *base, int offset) -{ - return readl_relaxed(base + offset); -} - -static inline void davinci_aemif_writel(void __iomem *base, - int offset, unsigned long value) -{ - writel_relaxed(value, base + offset); -} - -/* - * aemif_calc_rate - calculate timing data. - * @wanted: The cycle time needed in nanoseconds. - * @clk: The input clock rate in kHz. - * @max: The maximum divider value that can be programmed. - * - * On success, returns the calculated timing value minus 1 for easy - * programming into AEMIF timing registers, else negative errno. - */ -static int aemif_calc_rate(int wanted, unsigned long clk, int max) -{ - int result; - - result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1; - - pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted); - - /* It is generally OK to have a more relaxed timing than requested... */ - if (result < 0) - result = 0; - - /* ... But configuring tighter timings is not an option. */ - else if (result > max) - result = -EINVAL; - - return result; -} - -/** - * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface - * @t: timing values to be progammed - * @base: The virtual base address of the AEMIF interface - * @cs: chip-select to program the timing values for - * @clkrate: the AEMIF clkrate - * - * This function programs the given timing values (in real clock) into the - * AEMIF registers taking the AEMIF clock into account. - * - * This function does not use any locking while programming the AEMIF - * because it is expected that there is only one user of a given - * chip-select. - * - * Returns 0 on success, else negative errno. - */ -static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, - void __iomem *base, unsigned cs, - unsigned long clkrate) -{ - unsigned set, val; - int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup; - unsigned offset = A1CR_OFFSET + cs * 4; - - if (!t) - return 0; /* Nothing to do */ - - clkrate /= 1000; /* turn clock into kHz for ease of use */ - - ta = aemif_calc_rate(t->ta, clkrate, TA_MAX); - rhold = aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX); - rstrobe = aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX); - rsetup = aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX); - whold = aemif_calc_rate(t->whold, clkrate, WHOLD_MAX); - wstrobe = aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX); - wsetup = aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX); - - if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 || - whold < 0 || wstrobe < 0 || wsetup < 0) { - pr_err("%s: cannot get suitable timings\n", __func__); - return -EINVAL; - } - - set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) | - WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup); - - val = __raw_readl(base + offset); - val &= ~TIMING_MASK; - val |= set; - __raw_writel(val, base + offset); - - return 0; -} - -/** - * davinci_aemif_setup - setup AEMIF interface by davinci_nand_pdata - * @pdev - link to platform device to setup settings for - * - * This function does not use any locking while programming the AEMIF - * because it is expected that there is only one user of a given - * chip-select. - * - * Returns 0 on success, else negative errno. - */ -int davinci_aemif_setup(struct platform_device *pdev) -{ - struct davinci_nand_pdata *pdata = dev_get_platdata(&pdev->dev); - uint32_t val; - unsigned long clkrate; - struct resource *res; - void __iomem *base; - struct clk *clk; - int ret = 0; - - clk = clk_get(&pdev->dev, "aemif"); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); - return ret; - } - - ret = clk_prepare_enable(clk); - if (ret < 0) { - dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n", - ret); - goto err_put; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "cannot get IORESOURCE_MEM\n"); - ret = -ENOMEM; - goto err; - } - - base = ioremap(res->start, resource_size(res)); - if (!base) { - dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res); - ret = -ENOMEM; - goto err; - } - - /* - * Setup Async configuration register in case we did not boot - * from NAND and so bootloader did not bother to set it up. - */ - val = davinci_aemif_readl(base, A1CR_OFFSET + pdata->core_chipsel * 4); - /* - * Extended Wait is not valid and Select Strobe mode is not - * used - */ - val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK); - if (pdata->options & NAND_BUSWIDTH_16) - val |= 0x1; - - davinci_aemif_writel(base, A1CR_OFFSET + pdata->core_chipsel * 4, val); - - clkrate = clk_get_rate(clk); - - if (pdata->timing) - ret = davinci_aemif_setup_timing(pdata->timing, base, - pdata->core_chipsel, clkrate); - - if (ret < 0) - dev_dbg(&pdev->dev, "NAND timing values setup fail\n"); - - iounmap(base); -err: - clk_disable_unprepare(clk); -err_put: - clk_put(clk); - return ret; -} diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 14a6fc061744..7d8ab36ff83d 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -28,6 +28,7 @@ #include <linux/platform_data/mtd-davinci-aemif.h> #include <linux/platform_data/spi-davinci.h> #include <linux/platform_data/usb-davinci.h> +#include <linux/platform_data/ti-aemif.h> #include <linux/regulator/machine.h> #include <asm/mach-types.h> @@ -110,15 +111,9 @@ static __init void da830_evm_usb_init(void) { int ret; - /* USB_REFCLKIN is not used. */ - ret = da8xx_register_usb20_phy_clk(false); + ret = da8xx_register_usb_phy_clocks(); if (ret) - pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n", - __func__, ret); - - ret = da8xx_register_usb11_phy_clk(false); - if (ret) - pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", + pr_warn("%s: USB PHY CLK registration failed: %d\n", __func__, ret); ret = da8xx_register_usb_phy(); @@ -339,14 +334,48 @@ static struct resource da830_evm_nand_resources[] = { }, }; -static struct platform_device da830_evm_nand_device = { - .name = "davinci_nand", - .id = 1, - .dev = { - .platform_data = &da830_evm_nand_pdata, +static struct platform_device da830_evm_aemif_devices[] = { + { + .name = "davinci_nand", + .id = 1, + .dev = { + .platform_data = &da830_evm_nand_pdata, + }, + .num_resources = ARRAY_SIZE(da830_evm_nand_resources), + .resource = da830_evm_nand_resources, + }, +}; + +static struct resource da830_evm_aemif_resource[] = { + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct aemif_abus_data da830_evm_aemif_abus_data[] = { + { + .cs = 3, }, - .num_resources = ARRAY_SIZE(da830_evm_nand_resources), - .resource = da830_evm_nand_resources, +}; + +static struct aemif_platform_data da830_evm_aemif_pdata = { + .abus_data = da830_evm_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(da830_evm_aemif_abus_data), + .sub_devices = da830_evm_aemif_devices, + .num_sub_devices = ARRAY_SIZE(da830_evm_aemif_devices), + .cs_offset = 2, +}; + +static struct platform_device da830_evm_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &da830_evm_aemif_pdata, + }, + .resource = da830_evm_aemif_resource, + .num_resources = ARRAY_SIZE(da830_evm_aemif_resource), }; /* @@ -377,12 +406,9 @@ static inline void da830_evm_init_nand(int mux_mode) if (ret) pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret); - ret = platform_device_register(&da830_evm_nand_device); + ret = platform_device_register(&da830_evm_aemif_device); if (ret) - pr_warn("%s: NAND device not registered\n", __func__); - - if (davinci_aemif_setup(&da830_evm_nand_device)) - pr_warn("%s: Cannot configure AEMIF\n", __func__); + pr_warn("%s: AEMIF device not registered\n", __func__); gpio_direction_output(mux_mode, 1); } @@ -557,6 +583,8 @@ static __init void da830_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; + da830_register_clocks(); + ret = da830_register_gpio(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6d5beb11bd96..e1a949b47306 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -33,6 +33,7 @@ #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/ti-aemif.h> #include <linux/platform_data/spi-davinci.h> #include <linux/platform_data/uio_pruss.h> #include <linux/regulator/machine.h> @@ -185,16 +186,6 @@ static struct resource da850_evm_norflash_resource[] = { }, }; -static struct platform_device da850_evm_norflash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &da850_evm_norflash_data, - }, - .num_resources = 1, - .resource = da850_evm_norflash_resource, -}; - /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash * (128K blocks). It may be used instead of the (default) SPI flash * to boot, using TI's tools to install the secondary boot loader @@ -266,37 +257,58 @@ static struct resource da850_evm_nandflash_resource[] = { }, }; -static struct platform_device da850_evm_nandflash_device = { - .name = "davinci_nand", - .id = 1, - .dev = { - .platform_data = &da850_evm_nandflash_data, - }, - .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource), - .resource = da850_evm_nandflash_resource, +static struct resource da850_evm_aemif_resource[] = { + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, + .flags = IORESOURCE_MEM, + } }; -static struct platform_device *da850_evm_devices[] = { - &da850_evm_nandflash_device, - &da850_evm_norflash_device, +static struct aemif_abus_data da850_evm_aemif_abus_data[] = { + { + .cs = 3, + } }; -#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 -#define DA8XX_AEMIF_ASIZE_16BIT 0x1 - -static void __init da850_evm_init_nor(void) -{ - void __iomem *aemif_addr; - - aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); +static struct platform_device da850_evm_aemif_devices[] = { + { + .name = "davinci_nand", + .id = 1, + .dev = { + .platform_data = &da850_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource), + .resource = da850_evm_nandflash_resource, + }, + { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &da850_evm_norflash_data, + }, + .num_resources = 1, + .resource = da850_evm_norflash_resource, + } +}; - /* Configure data bus width of CS2 to 16 bit */ - writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | - DA8XX_AEMIF_ASIZE_16BIT, - aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); +static struct aemif_platform_data da850_evm_aemif_pdata = { + .cs_offset = 2, + .abus_data = da850_evm_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data), + .sub_devices = da850_evm_aemif_devices, + .num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices), +}; - iounmap(aemif_addr); -} +static struct platform_device da850_evm_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &da850_evm_aemif_pdata, + }, + .resource = da850_evm_aemif_resource, + .num_resources = ARRAY_SIZE(da850_evm_aemif_resource), +}; static const short da850_evm_nand_pins[] = { DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, @@ -339,13 +351,10 @@ static inline void da850_evm_setup_nor_nand(void) pr_warn("%s: NOR mux setup failed: %d\n", __func__, ret); - da850_evm_init_nor(); - - platform_add_devices(da850_evm_devices, - ARRAY_SIZE(da850_evm_devices)); - - if (davinci_aemif_setup(&da850_evm_nandflash_device)) - pr_warn("%s: Cannot configure AEMIF.\n", __func__); + ret = platform_device_register(&da850_evm_aemif_device); + if (ret) + pr_warn("%s: registering aemif failed: %d\n", + __func__, ret); } } @@ -1340,6 +1349,8 @@ static __init void da850_evm_init(void) { int ret; + da850_register_clocks(); + ret = da850_register_gpio(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index a3377f959444..f53a461a606f 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -394,6 +394,8 @@ static __init void dm355_evm_init(void) struct clk *aemif; int ret; + dm355_register_clocks(); + ret = dm355_gpio_register(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 8249a0bf69f0..0fdf1d03eb11 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -234,6 +234,8 @@ static __init void dm355_leopard_init(void) struct clk *aemif; int ret; + dm355_register_clocks(); + ret = dm355_gpio_register(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 435f7ec7d9af..8143756ff38b 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -28,6 +28,7 @@ #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> #include <linux/v4l2-dv-timings.h> +#include <linux/platform_data/ti-aemif.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -159,16 +160,49 @@ static struct resource davinci_nand_resources[] = { }, }; -static struct platform_device davinci_nand_device = { - .name = "davinci_nand", - .id = 0, - .num_resources = ARRAY_SIZE(davinci_nand_resources), - .resource = davinci_nand_resources, - .dev = { - .platform_data = &davinci_nand_data, +static struct platform_device davinci_aemif_devices[] = { + { + .name = "davinci_nand", + .id = 0, + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + .dev = { + .platform_data = &davinci_nand_data, + }, + } +}; + +static struct resource davinci_aemif_resources[] = { + { + .start = DM365_ASYNC_EMIF_CONTROL_BASE, + .end = DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, }, }; +static struct aemif_abus_data da850_evm_aemif_abus_data[] = { + { + .cs = 1, + }, +}; + +static struct aemif_platform_data davinci_aemif_pdata = { + .abus_data = da850_evm_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data), + .sub_devices = davinci_aemif_devices, + .num_sub_devices = ARRAY_SIZE(davinci_aemif_devices), +}; + +static struct platform_device davinci_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &davinci_aemif_pdata, + }, + .resource = davinci_aemif_resources, + .num_resources = ARRAY_SIZE(davinci_aemif_resources), +}; + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, @@ -537,10 +571,6 @@ static void __init evm_init_i2c(void) i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } -static struct platform_device *dm365_evm_nand_devices[] __initdata = { - &davinci_nand_device, -}; - static inline int have_leds(void) { #ifdef CONFIG_LEDS_CLASS @@ -628,6 +658,7 @@ static void __init evm_init_cpld(void) u8 mux, resets; const char *label; struct clk *aemif_clk; + int rc; /* Make sure we can configure the CPLD through CS1. Then * leave it on for later access to MMC and LED registers. @@ -660,8 +691,10 @@ fail: /* external keypad mux */ mux |= BIT(7); - platform_add_devices(dm365_evm_nand_devices, - ARRAY_SIZE(dm365_evm_nand_devices)); + rc = platform_device_register(&davinci_aemif_device); + if (rc) + pr_warn("%s(): error registering the aemif device: %d\n", + __func__, rc); } else { /* no OneNAND support yet */ } @@ -742,6 +775,8 @@ static __init void dm365_evm_init(void) { int ret; + dm365_register_clocks(); + ret = dm365_gpio_register(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 48436f74fd71..e4a8f9225d16 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -42,6 +42,7 @@ #include <linux/platform_data/mmc-davinci.h> #include <linux/platform_data/usb-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/ti-aemif.h> #include "davinci.h" @@ -174,14 +175,47 @@ static struct resource davinci_evm_nandflash_resource[] = { }, }; -static struct platform_device davinci_evm_nandflash_device = { - .name = "davinci_nand", - .id = 0, - .dev = { - .platform_data = &davinci_evm_nandflash_data, +static struct resource davinci_evm_aemif_resource[] = { + { + .start = DM644X_ASYNC_EMIF_CONTROL_BASE, + .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct aemif_abus_data davinci_evm_aemif_abus_data[] = { + { + .cs = 1, + }, +}; + +static struct platform_device davinci_evm_nandflash_devices[] = { + { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), + .resource = davinci_evm_nandflash_resource, + }, +}; + +static struct aemif_platform_data davinci_evm_aemif_pdata = { + .abus_data = davinci_evm_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(davinci_evm_aemif_abus_data), + .sub_devices = davinci_evm_nandflash_devices, + .num_sub_devices = ARRAY_SIZE(davinci_evm_nandflash_devices), +}; + +static struct platform_device davinci_evm_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &davinci_evm_aemif_pdata, }, - .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), - .resource = davinci_evm_nandflash_resource, + .resource = davinci_evm_aemif_resource, + .num_resources = ARRAY_SIZE(davinci_evm_aemif_resource), }; static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); @@ -773,6 +807,8 @@ static __init void davinci_evm_init(void) struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + dm644x_register_clocks(); + dm644x_init_devices(); ret = dm644x_gpio_register(); @@ -793,12 +829,7 @@ static __init void davinci_evm_init(void) /* only one device will be jumpered and detected */ if (HAS_NAND) { - platform_device_register(&davinci_evm_nandflash_device); - - if (davinci_aemif_setup(&davinci_evm_nandflash_device)) - pr_warn("%s: Cannot configure AEMIF\n", - __func__); - + platform_device_register(&davinci_evm_aemif_device); #ifdef CONFIG_I2C evm_leds[7].default_trigger = "nand-disk"; #endif diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 584064fdabf5..3e5ee09ee717 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -24,6 +24,7 @@ #include <linux/i2c.h> #include <linux/platform_data/at24.h> #include <linux/platform_data/pcf857x.h> +#include <linux/platform_data/ti-aemif.h> #include <media/i2c/tvp514x.h> #include <media/i2c/adv7343.h> @@ -106,18 +107,49 @@ static struct resource davinci_nand_resources[] = { }, }; -static struct platform_device davinci_nand_device = { - .name = "davinci_nand", - .id = 0, +static struct platform_device davinci_aemif_devices[] = { + { + .name = "davinci_nand", + .id = 0, + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + .dev = { + .platform_data = &davinci_nand_data, + }, + }, +}; - .num_resources = ARRAY_SIZE(davinci_nand_resources), - .resource = davinci_nand_resources, +static struct resource davinci_aemif_resources[] = { + { + .start = DM646X_ASYNC_EMIF_CONTROL_BASE, + .end = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; - .dev = { - .platform_data = &davinci_nand_data, +static struct aemif_abus_data davinci_aemif_abus_data[] = { + { + .cs = 1, }, }; +static struct aemif_platform_data davinci_aemif_pdata = { + .abus_data = davinci_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(davinci_aemif_abus_data), + .sub_devices = davinci_aemif_devices, + .num_sub_devices = ARRAY_SIZE(davinci_aemif_devices), +}; + +static struct platform_device davinci_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &davinci_aemif_pdata, + }, + .resource = davinci_aemif_resources, + .num_resources = ARRAY_SIZE(davinci_aemif_resources), +}; + #define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ IS_ENABLED(CONFIG_PATA_BK3710)) @@ -776,6 +808,8 @@ static __init void evm_init(void) int ret; struct davinci_soc_info *soc_info = &davinci_soc_info; + dm646x_register_clocks(); + ret = dm646x_gpio_register(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); @@ -791,10 +825,8 @@ static __init void evm_init(void) if (machine_is_davinci_dm6467tevm()) davinci_nand_data.timing = &dm6467tevm_nandflash_timing; - platform_device_register(&davinci_nand_device); - - if (davinci_aemif_setup(&davinci_nand_device)) - pr_warn("%s: Cannot configure AEMIF.\n", __func__); + if (platform_device_register(&davinci_aemif_device)) + pr_warn("%s: Cannot register AEMIF device.\n", __func__); dm646x_init_edma(dm646x_edma_rsv); diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 37b3e48a21d1..2933e0c87cfa 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -30,6 +30,7 @@ #include <mach/da8xx.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/ti-aemif.h> #include <mach/mux.h> #include <linux/platform_data/spi-davinci.h> @@ -422,27 +423,53 @@ static struct resource mityomapl138_nandflash_resource[] = { }, }; -static struct platform_device mityomapl138_nandflash_device = { - .name = "davinci_nand", - .id = 1, - .dev = { - .platform_data = &mityomapl138_nandflash_data, +static struct platform_device mityomapl138_aemif_devices[] = { + { + .name = "davinci_nand", + .id = 1, + .dev = { + .platform_data = &mityomapl138_nandflash_data, + }, + .num_resources = ARRAY_SIZE(mityomapl138_nandflash_resource), + .resource = mityomapl138_nandflash_resource, + }, +}; + +static struct resource mityomapl138_aemif_resources[] = { + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, }, - .num_resources = ARRAY_SIZE(mityomapl138_nandflash_resource), - .resource = mityomapl138_nandflash_resource, }; -static struct platform_device *mityomapl138_devices[] __initdata = { - &mityomapl138_nandflash_device, +static struct aemif_abus_data mityomapl138_aemif_abus_data[] = { + { + .cs = 1, + }, +}; + +static struct aemif_platform_data mityomapl138_aemif_pdata = { + .abus_data = mityomapl138_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(mityomapl138_aemif_abus_data), + .sub_devices = mityomapl138_aemif_devices, + .num_sub_devices = ARRAY_SIZE(mityomapl138_aemif_devices), +}; + +static struct platform_device mityomapl138_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &mityomapl138_aemif_pdata, + }, + .resource = mityomapl138_aemif_resources, + .num_resources = ARRAY_SIZE(mityomapl138_aemif_resources), }; static void __init mityomapl138_setup_nand(void) { - platform_add_devices(mityomapl138_devices, - ARRAY_SIZE(mityomapl138_devices)); - - if (davinci_aemif_setup(&mityomapl138_nandflash_device)) - pr_warn("%s: Cannot configure AEMIF\n", __func__); + if (platform_device_register(&mityomapl138_aemif_device)) + pr_warn("%s: Cannot register AEMIF device\n", __func__); } static const short mityomap_mii_pins[] = { @@ -503,6 +530,8 @@ static void __init mityomapl138_init(void) { int ret; + da850_register_clocks(); + /* for now, no special EDMA channels are reserved */ ret = da850_register_edma(NULL); if (ret) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 25ad9b0612be..353f9e5a1454 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -175,6 +175,8 @@ static __init void davinci_ntosd2_init(void) struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + dm644x_register_clocks(); + dm644x_init_devices(); ret = dm644x_gpio_register(); diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index be8b892a6ea7..8e8d51f4a276 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -15,7 +15,12 @@ #include <linux/interrupt.h> #include <linux/gpio.h> #include <linux/gpio/machine.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/rawnand.h> #include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/ti-aemif.h> #include <linux/regulator/machine.h> #include <asm/mach-types.h> @@ -166,6 +171,129 @@ mmc_setup_mmcsd_fail: gpiod_remove_lookup_table(&mmc_gpios_table); } +static struct mtd_partition omapl138_hawk_nandflash_partition[] = { + { + .name = "u-boot env", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "u-boot", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "free space", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct davinci_aemif_timing omapl138_hawk_nandflash_timing = { + .wsetup = 24, + .wstrobe = 21, + .whold = 14, + .rsetup = 19, + .rstrobe = 50, + .rhold = 0, + .ta = 20, +}; + +static struct davinci_nand_pdata omapl138_hawk_nandflash_data = { + .core_chipsel = 1, + .parts = omapl138_hawk_nandflash_partition, + .nr_parts = ARRAY_SIZE(omapl138_hawk_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .ecc_bits = 4, + .bbt_options = NAND_BBT_USE_FLASH, + .options = NAND_BUSWIDTH_16, + .timing = &omapl138_hawk_nandflash_timing, + .mask_chipsel = 0, + .mask_ale = 0, + .mask_cle = 0, +}; + +static struct resource omapl138_hawk_nandflash_resource[] = { + { + .start = DA8XX_AEMIF_CS3_BASE, + .end = DA8XX_AEMIF_CS3_BASE + SZ_32M, + .flags = IORESOURCE_MEM, + }, + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource omapl138_hawk_aemif_resource[] = { + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, + .flags = IORESOURCE_MEM, + } +}; + +static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = { + { + .cs = 3, + } +}; + +static struct platform_device omapl138_hawk_aemif_devices[] = { + { + .name = "davinci_nand", + .id = -1, + .dev = { + .platform_data = &omapl138_hawk_nandflash_data, + }, + .resource = omapl138_hawk_nandflash_resource, + .num_resources = ARRAY_SIZE(omapl138_hawk_nandflash_resource), + } +}; + +static struct aemif_platform_data omapl138_hawk_aemif_pdata = { + .cs_offset = 2, + .abus_data = omapl138_hawk_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(omapl138_hawk_aemif_abus_data), + .sub_devices = omapl138_hawk_aemif_devices, + .num_sub_devices = ARRAY_SIZE(omapl138_hawk_aemif_devices), +}; + +static struct platform_device omapl138_hawk_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &omapl138_hawk_aemif_pdata, + }, + .resource = omapl138_hawk_aemif_resource, + .num_resources = ARRAY_SIZE(omapl138_hawk_aemif_resource), +}; + +static const short omapl138_hawk_nand_pins[] = { + DA850_EMA_WAIT_1, DA850_NEMA_OE, DA850_NEMA_WE, DA850_NEMA_CS_3, + DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, + DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, + DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11, + DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15, + DA850_EMA_A_1, DA850_EMA_A_2, + -1 +}; + +static int omapl138_hawk_register_aemif(void) +{ + int ret; + + ret = davinci_cfg_reg_list(omapl138_hawk_nand_pins); + if (ret) + pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret); + + return platform_device_register(&omapl138_hawk_aemif_device); +} + static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id); static da8xx_ocic_handler_t hawk_usb_ocic_handler; @@ -236,14 +364,9 @@ static __init void omapl138_hawk_usb_init(void) return; } - ret = da8xx_register_usb20_phy_clk(false); - if (ret) - pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n", - __func__, ret); - - ret = da8xx_register_usb11_phy_clk(false); + ret = da8xx_register_usb_phy_clocks(); if (ret) - pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", + pr_warn("%s: USB PHY CLK registration failed: %d\n", __func__, ret); ret = da8xx_register_usb_phy(); @@ -285,6 +408,8 @@ static __init void omapl138_hawk_init(void) { int ret; + da850_register_clocks(); + ret = da850_register_gpio(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); @@ -301,6 +426,10 @@ static __init void omapl138_hawk_init(void) omapl138_hawk_usb_init(); + ret = omapl138_hawk_register_aemif(); + if (ret) + pr_warn("%s: aemif registration failed: %d\n", __func__, ret); + ret = da8xx_register_watchdog(); if (ret) pr_warn("%s: watchdog registration failed: %d\n", diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index e7c1728b0833..792bb84d5011 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -134,6 +134,8 @@ static __init void davinci_sffsdr_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; + dm644x_register_clocks(); + dm644x_init_devices(); platform_add_devices(davinci_sffsdr_devices, diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c deleted file mode 100644 index f77a4f766050..000000000000 --- a/arch/arm/mach-davinci/clock.c +++ /dev/null @@ -1,745 +0,0 @@ -/* - * Clock and PLL control for DaVinci devices - * - * Copyright (C) 2006-2007 Texas Instruments. - * Copyright (C) 2008-2009 Deep Root Systems, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/mutex.h> -#include <linux/io.h> -#include <linux/delay.h> - -#include <mach/hardware.h> - -#include <mach/clock.h> -#include "psc.h" -#include <mach/cputype.h> -#include "clock.h" - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clockfw_lock); - -void davinci_clk_enable(struct clk *clk) -{ - if (clk->parent) - davinci_clk_enable(clk->parent); - if (clk->usecount++ == 0) { - if (clk->flags & CLK_PSC) - davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, - true, clk->flags); - else if (clk->clk_enable) - clk->clk_enable(clk); - } -} - -void davinci_clk_disable(struct clk *clk) -{ - if (WARN_ON(clk->usecount == 0)) - return; - if (--clk->usecount == 0) { - if (!(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC)) - davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, - false, clk->flags); - else if (clk->clk_disable) - clk->clk_disable(clk); - } - if (clk->parent) - davinci_clk_disable(clk->parent); -} - -int davinci_clk_reset(struct clk *clk, bool reset) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->flags & CLK_PSC) - davinci_psc_reset(clk->gpsc, clk->lpsc, reset); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -EXPORT_SYMBOL(davinci_clk_reset); - -int davinci_clk_reset_assert(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk) || !clk->reset) - return -EINVAL; - - return clk->reset(clk, true); -} -EXPORT_SYMBOL(davinci_clk_reset_assert); - -int davinci_clk_reset_deassert(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk) || !clk->reset) - return -EINVAL; - - return clk->reset(clk, false); -} -EXPORT_SYMBOL(davinci_clk_reset_deassert); - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (!clk) - return 0; - else if (IS_ERR(clk)) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - davinci_clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - davinci_clk_disable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return 0; - - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk == NULL || IS_ERR(clk)) - return 0; - - if (clk->round_rate) - return clk->round_rate(clk, rate); - - return clk->rate; -} -EXPORT_SYMBOL(clk_round_rate); - -/* Propagate rate to children */ -static void propagate_rate(struct clk *root) -{ - struct clk *clk; - - list_for_each_entry(clk, &root->children, childnode) { - if (clk->recalc) - clk->rate = clk->recalc(clk); - propagate_rate(clk); - } -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (!clk) - return 0; - else if (IS_ERR(clk)) - return -EINVAL; - - if (clk->set_rate) - ret = clk->set_rate(clk, rate); - - spin_lock_irqsave(&clockfw_lock, flags); - if (ret == 0) { - if (clk->recalc) - clk->rate = clk->recalc(clk); - propagate_rate(clk); - } - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - - if (!clk) - return 0; - else if (IS_ERR(clk)) - return -EINVAL; - - /* Cannot change parent on enabled clock */ - if (WARN_ON(clk->usecount)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - if (clk->set_parent) { - int ret = clk->set_parent(clk, parent); - - if (ret) { - mutex_unlock(&clocks_mutex); - return ret; - } - } - clk->parent = parent; - list_del_init(&clk->childnode); - list_add(&clk->childnode, &clk->parent->children); - mutex_unlock(&clocks_mutex); - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->recalc) - clk->rate = clk->recalc(clk); - propagate_rate(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - if (!clk) - return NULL; - - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -int clk_register(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - if (WARN(clk->parent && !clk->parent->rate, - "CLK: %s parent %s has no rate!\n", - clk->name, clk->parent->name)) - return -EINVAL; - - INIT_LIST_HEAD(&clk->children); - - mutex_lock(&clocks_mutex); - list_add_tail(&clk->node, &clocks); - if (clk->parent) { - if (clk->set_parent) { - int ret = clk->set_parent(clk, clk->parent); - - if (ret) { - mutex_unlock(&clocks_mutex); - return ret; - } - } - list_add_tail(&clk->childnode, &clk->parent->children); - } - mutex_unlock(&clocks_mutex); - - /* If rate is already set, use it */ - if (clk->rate) - return 0; - - /* Else, see if there is a way to calculate it */ - if (clk->recalc) - clk->rate = clk->recalc(clk); - - /* Otherwise, default to parent rate */ - else if (clk->parent) - clk->rate = clk->parent->rate; - - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - list_del(&clk->node); - list_del(&clk->childnode); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -#ifdef CONFIG_DAVINCI_RESET_CLOCKS -/* - * Disable any unused clocks left on by the bootloader - */ -int __init davinci_clk_disable_unused(void) -{ - struct clk *ck; - - spin_lock_irq(&clockfw_lock); - list_for_each_entry(ck, &clocks, node) { - if (ck->usecount > 0) - continue; - if (!(ck->flags & CLK_PSC)) - continue; - - /* ignore if in Disabled or SwRstDisable states */ - if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc)) - continue; - - pr_debug("Clocks: disable unused %s\n", ck->name); - - davinci_psc_config(ck->domain, ck->gpsc, ck->lpsc, - false, ck->flags); - } - spin_unlock_irq(&clockfw_lock); - - return 0; -} -#endif - -static unsigned long clk_sysclk_recalc(struct clk *clk) -{ - u32 v, plldiv; - struct pll_data *pll; - unsigned long rate = clk->rate; - - /* If this is the PLL base clock, no more calculations needed */ - if (clk->pll_data) - return rate; - - if (WARN_ON(!clk->parent)) - return rate; - - rate = clk->parent->rate; - - /* Otherwise, the parent must be a PLL */ - if (WARN_ON(!clk->parent->pll_data)) - return rate; - - pll = clk->parent->pll_data; - - /* If pre-PLL, source clock is before the multiplier and divider(s) */ - if (clk->flags & PRE_PLL) - rate = pll->input_rate; - - if (!clk->div_reg) - return rate; - - v = __raw_readl(pll->base + clk->div_reg); - if (v & PLLDIV_EN) { - plldiv = (v & pll->div_ratio_mask) + 1; - if (plldiv) - rate /= plldiv; - } - - return rate; -} - -int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate) -{ - unsigned v; - struct pll_data *pll; - unsigned long input; - unsigned ratio = 0; - - /* If this is the PLL base clock, wrong function to call */ - if (clk->pll_data) - return -EINVAL; - - /* There must be a parent... */ - if (WARN_ON(!clk->parent)) - return -EINVAL; - - /* ... the parent must be a PLL... */ - if (WARN_ON(!clk->parent->pll_data)) - return -EINVAL; - - /* ... and this clock must have a divider. */ - if (WARN_ON(!clk->div_reg)) - return -EINVAL; - - pll = clk->parent->pll_data; - - input = clk->parent->rate; - - /* If pre-PLL, source clock is before the multiplier and divider(s) */ - if (clk->flags & PRE_PLL) - input = pll->input_rate; - - if (input > rate) { - /* - * Can afford to provide an output little higher than requested - * only if maximum rate supported by hardware on this sysclk - * is known. - */ - if (clk->maxrate) { - ratio = DIV_ROUND_CLOSEST(input, rate); - if (input / ratio > clk->maxrate) - ratio = 0; - } - - if (ratio == 0) - ratio = DIV_ROUND_UP(input, rate); - - ratio--; - } - - if (ratio > pll->div_ratio_mask) - return -EINVAL; - - do { - v = __raw_readl(pll->base + PLLSTAT); - } while (v & PLLSTAT_GOSTAT); - - v = __raw_readl(pll->base + clk->div_reg); - v &= ~pll->div_ratio_mask; - v |= ratio | PLLDIV_EN; - __raw_writel(v, pll->base + clk->div_reg); - - v = __raw_readl(pll->base + PLLCMD); - v |= PLLCMD_GOSET; - __raw_writel(v, pll->base + PLLCMD); - - do { - v = __raw_readl(pll->base + PLLSTAT); - } while (v & PLLSTAT_GOSTAT); - - return 0; -} -EXPORT_SYMBOL(davinci_set_sysclk_rate); - -static unsigned long clk_leafclk_recalc(struct clk *clk) -{ - if (WARN_ON(!clk->parent)) - return clk->rate; - - return clk->parent->rate; -} - -int davinci_simple_set_rate(struct clk *clk, unsigned long rate) -{ - clk->rate = rate; - return 0; -} - -static unsigned long clk_pllclk_recalc(struct clk *clk) -{ - u32 ctrl, mult = 1, prediv = 1, postdiv = 1; - u8 bypass; - struct pll_data *pll = clk->pll_data; - unsigned long rate = clk->rate; - - ctrl = __raw_readl(pll->base + PLLCTL); - rate = pll->input_rate = clk->parent->rate; - - if (ctrl & PLLCTL_PLLEN) { - bypass = 0; - mult = __raw_readl(pll->base + PLLM); - if (cpu_is_davinci_dm365()) - mult = 2 * (mult & PLLM_PLLM_MASK); - else - mult = (mult & PLLM_PLLM_MASK) + 1; - } else - bypass = 1; - - if (pll->flags & PLL_HAS_PREDIV) { - prediv = __raw_readl(pll->base + PREDIV); - if (prediv & PLLDIV_EN) - prediv = (prediv & pll->div_ratio_mask) + 1; - else - prediv = 1; - } - - /* pre-divider is fixed, but (some?) chips won't report that */ - if (cpu_is_davinci_dm355() && pll->num == 1) - prediv = 8; - - if (pll->flags & PLL_HAS_POSTDIV) { - postdiv = __raw_readl(pll->base + POSTDIV); - if (postdiv & PLLDIV_EN) - postdiv = (postdiv & pll->div_ratio_mask) + 1; - else - postdiv = 1; - } - - if (!bypass) { - rate /= prediv; - rate *= mult; - rate /= postdiv; - } - - pr_debug("PLL%d: input = %lu MHz [ ", - pll->num, clk->parent->rate / 1000000); - if (bypass) - pr_debug("bypass "); - if (prediv > 1) - pr_debug("/ %d ", prediv); - if (mult > 1) - pr_debug("* %d ", mult); - if (postdiv > 1) - pr_debug("/ %d ", postdiv); - pr_debug("] --> %lu MHz output.\n", rate / 1000000); - - return rate; -} - -/** - * davinci_set_pllrate - set the output rate of a given PLL. - * - * Note: Currently tested to work with OMAP-L138 only. - * - * @pll: pll whose rate needs to be changed. - * @prediv: The pre divider value. Passing 0 disables the pre-divider. - * @pllm: The multiplier value. Passing 0 leads to multiply-by-one. - * @postdiv: The post divider value. Passing 0 disables the post-divider. - */ -int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, - unsigned int mult, unsigned int postdiv) -{ - u32 ctrl; - unsigned int locktime; - unsigned long flags; - - if (pll->base == NULL) - return -EINVAL; - - /* - * PLL lock time required per OMAP-L138 datasheet is - * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm) - * as 4 and OSCIN cycle as 25 MHz. - */ - if (prediv) { - locktime = ((2000 * prediv) / 100); - prediv = (prediv - 1) | PLLDIV_EN; - } else { - locktime = PLL_LOCK_TIME; - } - if (postdiv) - postdiv = (postdiv - 1) | PLLDIV_EN; - if (mult) - mult = mult - 1; - - /* Protect against simultaneous calls to PLL setting seqeunce */ - spin_lock_irqsave(&clockfw_lock, flags); - - ctrl = __raw_readl(pll->base + PLLCTL); - - /* Switch the PLL to bypass mode */ - ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN); - __raw_writel(ctrl, pll->base + PLLCTL); - - udelay(PLL_BYPASS_TIME); - - /* Reset and enable PLL */ - ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS); - __raw_writel(ctrl, pll->base + PLLCTL); - - if (pll->flags & PLL_HAS_PREDIV) - __raw_writel(prediv, pll->base + PREDIV); - - __raw_writel(mult, pll->base + PLLM); - - if (pll->flags & PLL_HAS_POSTDIV) - __raw_writel(postdiv, pll->base + POSTDIV); - - udelay(PLL_RESET_TIME); - - /* Bring PLL out of reset */ - ctrl |= PLLCTL_PLLRST; - __raw_writel(ctrl, pll->base + PLLCTL); - - udelay(locktime); - - /* Remove PLL from bypass mode */ - ctrl |= PLLCTL_PLLEN; - __raw_writel(ctrl, pll->base + PLLCTL); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -EXPORT_SYMBOL(davinci_set_pllrate); - -/** - * davinci_set_refclk_rate() - Set the reference clock rate - * @rate: The new rate. - * - * Sets the reference clock rate to a given value. This will most likely - * result in the entire clock tree getting updated. - * - * This is used to support boards which use a reference clock different - * than that used by default in <soc>.c file. The reference clock rate - * should be updated early in the boot process; ideally soon after the - * clock tree has been initialized once with the default reference clock - * rate (davinci_clk_init()). - * - * Returns 0 on success, error otherwise. - */ -int davinci_set_refclk_rate(unsigned long rate) -{ - struct clk *refclk; - - refclk = clk_get(NULL, "ref"); - if (IS_ERR(refclk)) { - pr_err("%s: failed to get reference clock\n", __func__); - return PTR_ERR(refclk); - } - - clk_set_rate(refclk, rate); - - clk_put(refclk); - - return 0; -} - -int __init davinci_clk_init(struct clk_lookup *clocks) -{ - struct clk_lookup *c; - struct clk *clk; - size_t num_clocks = 0; - - for (c = clocks; c->clk; c++) { - clk = c->clk; - - if (!clk->recalc) { - - /* Check if clock is a PLL */ - if (clk->pll_data) - clk->recalc = clk_pllclk_recalc; - - /* Else, if it is a PLL-derived clock */ - else if (clk->flags & CLK_PLL) - clk->recalc = clk_sysclk_recalc; - - /* Otherwise, it is a leaf clock (PSC clock) */ - else if (clk->parent) - clk->recalc = clk_leafclk_recalc; - } - - if (clk->pll_data) { - struct pll_data *pll = clk->pll_data; - - if (!pll->div_ratio_mask) - pll->div_ratio_mask = PLLDIV_RATIO_MASK; - - if (pll->phys_base && !pll->base) { - pll->base = ioremap(pll->phys_base, SZ_4K); - WARN_ON(!pll->base); - } - } - - if (clk->recalc) - clk->rate = clk->recalc(clk); - - if (clk->lpsc) - clk->flags |= CLK_PSC; - - if (clk->flags & PSC_LRST) - clk->reset = davinci_clk_reset; - - clk_register(clk); - num_clocks++; - - /* Turn on clocks that Linux doesn't otherwise manage */ - if (clk->flags & ALWAYS_ENABLED) - clk_enable(clk); - } - - clkdev_add_table(clocks, num_clocks); - - return 0; -} - -#ifdef CONFIG_DEBUG_FS - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -#define CLKNAME_MAX 10 /* longest clock name */ -#define NEST_DELTA 2 -#define NEST_MAX 4 - -static void -dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) -{ - char *state; - char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; - struct clk *clk; - unsigned i; - - if (parent->flags & CLK_PLL) - state = "pll"; - else if (parent->flags & CLK_PSC) - state = "psc"; - else - state = ""; - - /* <nest spaces> name <pad to end> */ - memset(buf, ' ', sizeof(buf) - 1); - buf[sizeof(buf) - 1] = 0; - i = strlen(parent->name); - memcpy(buf + nest, parent->name, - min(i, (unsigned)(sizeof(buf) - 1 - nest))); - - seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", - buf, parent->usecount, state, clk_get_rate(parent)); - /* REVISIT show device associations too */ - - /* cost is now small, but not linear... */ - list_for_each_entry(clk, &parent->children, childnode) { - dump_clock(s, nest + NEST_DELTA, clk); - } -} - -static int davinci_ck_show(struct seq_file *m, void *v) -{ - struct clk *clk; - - /* - * Show clock tree; We trust nonzero usecounts equate to PSC enables... - */ - mutex_lock(&clocks_mutex); - list_for_each_entry(clk, &clocks, node) - if (!clk->parent) - dump_clock(m, 0, clk); - mutex_unlock(&clocks_mutex); - - return 0; -} - -static int davinci_ck_open(struct inode *inode, struct file *file) -{ - return single_open(file, davinci_ck_show, NULL); -} - -static const struct file_operations davinci_ck_operations = { - .open = davinci_ck_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init davinci_clk_debugfs_init(void) -{ - debugfs_create_file("davinci_clocks", S_IFREG | S_IRUGO, NULL, NULL, - &davinci_ck_operations); - return 0; - -} -device_initcall(davinci_clk_debugfs_init); -#endif /* CONFIG_DEBUG_FS */ diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index d7894d5aaa25..307383472400 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -12,10 +12,6 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H -#define DAVINCI_PLL1_BASE 0x01c40800 -#define DAVINCI_PLL2_BASE 0x01c40c00 -#define MAX_PLL 2 - /* PLL/Reset register offsets */ #define PLLCTL 0x100 #define PLLCTL_PLLEN BIT(0) @@ -65,76 +61,4 @@ */ #define PLL_LOCK_TIME 20 -#ifndef __ASSEMBLER__ - -#include <linux/list.h> -#include <linux/clkdev.h> - -#define PLLSTAT_GOSTAT BIT(0) -#define PLLCMD_GOSET BIT(0) - -struct pll_data { - u32 phys_base; - void __iomem *base; - u32 num; - u32 flags; - u32 input_rate; - u32 div_ratio_mask; -}; -#define PLL_HAS_PREDIV 0x01 -#define PLL_HAS_POSTDIV 0x02 - -struct clk { - struct list_head node; - struct module *owner; - const char *name; - unsigned long rate; - unsigned long maxrate; /* H/W supported max rate */ - u8 usecount; - u8 lpsc; - u8 gpsc; - u8 domain; - u32 flags; - struct clk *parent; - struct list_head children; /* list of children */ - struct list_head childnode; /* parent's child list node */ - struct pll_data *pll_data; - u32 div_reg; - unsigned long (*recalc) (struct clk *); - int (*set_rate) (struct clk *clk, unsigned long rate); - int (*round_rate) (struct clk *clk, unsigned long rate); - int (*reset) (struct clk *clk, bool reset); - void (*clk_enable) (struct clk *clk); - void (*clk_disable) (struct clk *clk); - int (*set_parent) (struct clk *clk, struct clk *parent); -}; - -/* Clock flags: SoC-specific flags start at BIT(16) */ -#define ALWAYS_ENABLED BIT(1) -#define CLK_PSC BIT(2) -#define CLK_PLL BIT(3) /* PLL-derived clock */ -#define PRE_PLL BIT(4) /* source is before PLL mult/div */ -#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */ -#define PSC_FORCE BIT(6) /* Force module state transtition */ -#define PSC_LRST BIT(8) /* Use local reset on enable/disable */ - -#define CLK(dev, con, ck) \ - { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - } \ - -int davinci_clk_init(struct clk_lookup *clocks); -int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, - unsigned int mult, unsigned int postdiv); -int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate); -int davinci_set_refclk_rate(unsigned long rate); -int davinci_simple_set_rate(struct clk *clk, unsigned long rate); -int davinci_clk_reset(struct clk *clk, bool reset); -void davinci_clk_enable(struct clk *clk); -void davinci_clk_disable(struct clk *clk); - -#endif - #endif diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index bcb6a7ba84e9..e1d0f0d841ff 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -20,8 +20,6 @@ #include <mach/common.h> #include <mach/cputype.h> -#include "clock.h" - struct davinci_soc_info davinci_soc_info; EXPORT_SYMBOL(davinci_soc_info); @@ -118,5 +116,4 @@ err: void __init davinci_init_late(void) { davinci_cpufreq_init(); - davinci_clk_disable_unused(); } diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 350d7673aa4d..0bc5bd2665df 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -8,21 +8,20 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/clk-provider.h> +#include <linux/clk/davinci.h> #include <linux/gpio.h> #include <linux/init.h> -#include <linux/clk.h> #include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> -#include "psc.h" -#include <mach/irqs.h> -#include <mach/cputype.h> #include <mach/common.h> -#include <mach/time.h> +#include <mach/cputype.h> #include <mach/da8xx.h> +#include <mach/irqs.h> +#include <mach/time.h> -#include "clock.h" #include "mux.h" /* Offsets of the 8 compare registers on the da830 */ @@ -37,402 +36,6 @@ #define DA830_REF_FREQ 24000000 -static struct pll_data pll0_data = { - .num = 1, - .phys_base = DA8XX_PLL0_BASE, - .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - .rate = DA830_REF_FREQ, -}; - -static struct clk pll0_clk = { - .name = "pll0", - .parent = &ref_clk, - .pll_data = &pll0_data, - .flags = CLK_PLL, -}; - -static struct clk pll0_aux_clk = { - .name = "pll0_aux_clk", - .parent = &pll0_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll0_sysclk2 = { - .name = "pll0_sysclk2", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll0_sysclk3 = { - .name = "pll0_sysclk3", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll0_sysclk4 = { - .name = "pll0_sysclk4", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll0_sysclk5 = { - .name = "pll0_sysclk5", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll0_sysclk6 = { - .name = "pll0_sysclk6", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll0_sysclk7 = { - .name = "pll0_sysclk7", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - -static struct clk i2c0_clk = { - .name = "i2c0", - .parent = &pll0_aux_clk, -}; - -static struct clk timerp64_0_clk = { - .name = "timer0", - .parent = &pll0_aux_clk, -}; - -static struct clk timerp64_1_clk = { - .name = "timer1", - .parent = &pll0_aux_clk, -}; - -static struct clk arm_rom_clk = { - .name = "arm_rom", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_ARM_RAM_ROM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk scr0_ss_clk = { - .name = "scr0_ss", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_SCR0_SS, - .flags = ALWAYS_ENABLED, -}; - -static struct clk scr1_ss_clk = { - .name = "scr1_ss", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_SCR1_SS, - .flags = ALWAYS_ENABLED, -}; - -static struct clk scr2_ss_clk = { - .name = "scr2_ss", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_SCR2_SS, - .flags = ALWAYS_ENABLED, -}; - -static struct clk dmax_clk = { - .name = "dmax", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_PRUSS, - .flags = ALWAYS_ENABLED, -}; - -static struct clk tpcc_clk = { - .name = "tpcc", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPCC, - .flags = ALWAYS_ENABLED | CLK_PSC, -}; - -static struct clk tptc0_clk = { - .name = "tptc0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPTC0, - .flags = ALWAYS_ENABLED, -}; - -static struct clk tptc1_clk = { - .name = "tptc1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPTC1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk mmcsd_clk = { - .name = "mmcsd", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_MMC_SD, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_UART1, - .gpsc = 1, -}; - -static struct clk uart2_clk = { - .name = "uart2", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_UART2, - .gpsc = 1, -}; - -static struct clk spi0_clk = { - .name = "spi0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_SPI0, -}; - -static struct clk spi1_clk = { - .name = "spi1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_SPI1, - .gpsc = 1, -}; - -static struct clk ecap0_clk = { - .name = "ecap0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_ECAP, - .gpsc = 1, -}; - -static struct clk ecap1_clk = { - .name = "ecap1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_ECAP, - .gpsc = 1, -}; - -static struct clk ecap2_clk = { - .name = "ecap2", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_ECAP, - .gpsc = 1, -}; - -static struct clk pwm0_clk = { - .name = "pwm0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_PWM, - .gpsc = 1, -}; - -static struct clk pwm1_clk = { - .name = "pwm1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_PWM, - .gpsc = 1, -}; - -static struct clk pwm2_clk = { - .name = "pwm2", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_PWM, - .gpsc = 1, -}; - -static struct clk eqep0_clk = { - .name = "eqep0", - .parent = &pll0_sysclk2, - .lpsc = DA830_LPSC1_EQEP, - .gpsc = 1, -}; - -static struct clk eqep1_clk = { - .name = "eqep1", - .parent = &pll0_sysclk2, - .lpsc = DA830_LPSC1_EQEP, - .gpsc = 1, -}; - -static struct clk lcdc_clk = { - .name = "lcdc", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_LCDC, - .gpsc = 1, -}; - -static struct clk mcasp0_clk = { - .name = "mcasp0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_McASP0, - .gpsc = 1, -}; - -static struct clk mcasp1_clk = { - .name = "mcasp1", - .parent = &pll0_sysclk2, - .lpsc = DA830_LPSC1_McASP1, - .gpsc = 1, -}; - -static struct clk mcasp2_clk = { - .name = "mcasp2", - .parent = &pll0_sysclk2, - .lpsc = DA830_LPSC1_McASP2, - .gpsc = 1, -}; - -static struct clk usb20_clk = { - .name = "usb20", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_USB20, - .gpsc = 1, -}; - -static struct clk cppi41_clk = { - .name = "cppi41", - .parent = &usb20_clk, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll0_sysclk3, - .lpsc = DA8XX_LPSC0_EMIF25, - .flags = ALWAYS_ENABLED, -}; - -static struct clk aintc_clk = { - .name = "aintc", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC0_AINTC, - .flags = ALWAYS_ENABLED, -}; - -static struct clk secu_mgr_clk = { - .name = "secu_mgr", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC0_SECU_MGR, - .flags = ALWAYS_ENABLED, -}; - -static struct clk emac_clk = { - .name = "emac", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_CPGMAC, - .gpsc = 1, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_GPIO, - .gpsc = 1, -}; - -static struct clk i2c1_clk = { - .name = "i2c1", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_I2C, - .gpsc = 1, -}; - -static struct clk usb11_clk = { - .name = "usb11", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_USB11, - .gpsc = 1, -}; - -static struct clk emif3_clk = { - .name = "emif3", - .parent = &pll0_sysclk5, - .lpsc = DA8XX_LPSC1_EMIF3C, - .gpsc = 1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk arm_clk = { - .name = "arm", - .parent = &pll0_sysclk6, - .lpsc = DA8XX_LPSC0_ARM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk rmii_clk = { - .name = "rmii", - .parent = &pll0_sysclk7, -}; - -static struct clk_lookup da830_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "pll0", &pll0_clk), - CLK(NULL, "pll0_aux", &pll0_aux_clk), - CLK(NULL, "pll0_sysclk2", &pll0_sysclk2), - CLK(NULL, "pll0_sysclk3", &pll0_sysclk3), - CLK(NULL, "pll0_sysclk4", &pll0_sysclk4), - CLK(NULL, "pll0_sysclk5", &pll0_sysclk5), - CLK(NULL, "pll0_sysclk6", &pll0_sysclk6), - CLK(NULL, "pll0_sysclk7", &pll0_sysclk7), - CLK("i2c_davinci.1", NULL, &i2c0_clk), - CLK(NULL, "timer0", &timerp64_0_clk), - CLK("davinci-wdt", NULL, &timerp64_1_clk), - CLK(NULL, "arm_rom", &arm_rom_clk), - CLK(NULL, "scr0_ss", &scr0_ss_clk), - CLK(NULL, "scr1_ss", &scr1_ss_clk), - CLK(NULL, "scr2_ss", &scr2_ss_clk), - CLK(NULL, "dmax", &dmax_clk), - CLK(NULL, "tpcc", &tpcc_clk), - CLK(NULL, "tptc0", &tptc0_clk), - CLK(NULL, "tptc1", &tptc1_clk), - CLK("da830-mmc.0", NULL, &mmcsd_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("serial8250.2", NULL, &uart2_clk), - CLK("spi_davinci.0", NULL, &spi0_clk), - CLK("spi_davinci.1", NULL, &spi1_clk), - CLK(NULL, "ecap0", &ecap0_clk), - CLK(NULL, "ecap1", &ecap1_clk), - CLK(NULL, "ecap2", &ecap2_clk), - CLK(NULL, "pwm0", &pwm0_clk), - CLK(NULL, "pwm1", &pwm1_clk), - CLK(NULL, "pwm2", &pwm2_clk), - CLK("eqep.0", NULL, &eqep0_clk), - CLK("eqep.1", NULL, &eqep1_clk), - CLK("da8xx_lcdc.0", "fck", &lcdc_clk), - CLK("davinci-mcasp.0", NULL, &mcasp0_clk), - CLK("davinci-mcasp.1", NULL, &mcasp1_clk), - CLK("davinci-mcasp.2", NULL, &mcasp2_clk), - CLK("musb-da8xx", NULL, &usb20_clk), - CLK("cppi41-dmaengine", NULL, &cppi41_clk), - CLK(NULL, "aemif", &aemif_clk), - CLK(NULL, "aintc", &aintc_clk), - CLK(NULL, "secu_mgr", &secu_mgr_clk), - CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK("i2c_davinci.2", NULL, &i2c1_clk), - CLK("ohci-da8xx", NULL, &usb11_clk), - CLK(NULL, "emif3", &emif3_clk), - CLK(NULL, "arm", &arm_clk), - CLK(NULL, "rmii", &rmii_clk), - CLK(NULL, NULL, NULL), -}; - /* * Device specific mux setup * @@ -1130,8 +733,6 @@ static struct map_desc da830_io_desc[] = { }, }; -static u32 da830_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE }; - /* Contents of JTAG ID register used to identify exact cpu type */ static struct davinci_id da830_ids[] = { { @@ -1200,8 +801,6 @@ static const struct davinci_soc_info davinci_soc_info_da830 = { .jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG, .ids = da830_ids, .ids_num = ARRAY_SIZE(da830_ids), - .psc_bases = da830_psc_bases, - .psc_bases_num = ARRAY_SIZE(da830_psc_bases), .pinmux_base = DA8XX_SYSCFG0_BASE + 0x120, .pinmux_pins = da830_pins, .pinmux_pins_num = ARRAY_SIZE(da830_pins), @@ -1223,6 +822,53 @@ void __init da830_init(void) void __init da830_init_time(void) { - davinci_clk_init(da830_clks); - davinci_timer_init(); + void __iomem *pll; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA830_REF_FREQ); + + pll = ioremap(DA8XX_PLL0_BASE, SZ_4K); + + da830_pll_init(NULL, pll, NULL); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +static struct resource da830_psc0_resources[] = { + { + .start = DA8XX_PSC0_BASE, + .end = DA8XX_PSC0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da830_psc0_device = { + .name = "da830-psc0", + .id = -1, + .resource = da830_psc0_resources, + .num_resources = ARRAY_SIZE(da830_psc0_resources), +}; + +static struct resource da830_psc1_resources[] = { + { + .start = DA8XX_PSC1_BASE, + .end = DA8XX_PSC1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da830_psc1_device = { + .name = "da830-psc1", + .id = -1, + .resource = da830_psc1_resources, + .num_resources = ARRAY_SIZE(da830_psc1_resources), +}; + +void __init da830_register_clocks(void) +{ + /* PLL is registered in da830_init_time() */ + platform_device_register(&da830_psc0_device); + platform_device_register(&da830_psc1_device); } diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 34117e614e08..4528bbf0c861 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -11,27 +11,31 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ + +#include <linux/clk-provider.h> +#include <linux/clk/davinci.h> #include <linux/clkdev.h> +#include <linux/cpufreq.h> #include <linux/gpio.h> #include <linux/init.h> -#include <linux/clk.h> +#include <linux/mfd/da8xx-cfgchip.h> +#include <linux/platform_data/clk-da8xx-cfgchip.h> +#include <linux/platform_data/clk-davinci-pll.h> +#include <linux/platform_data/gpio-davinci.h> #include <linux/platform_device.h> -#include <linux/cpufreq.h> +#include <linux/regmap.h> #include <linux/regulator/consumer.h> -#include <linux/platform_data/gpio-davinci.h> #include <asm/mach/map.h> -#include "psc.h" -#include <mach/irqs.h> -#include <mach/cputype.h> #include <mach/common.h> -#include <mach/time.h> -#include <mach/da8xx.h> #include <mach/cpufreq.h> +#include <mach/cputype.h> +#include <mach/da8xx.h> +#include <mach/irqs.h> #include <mach/pm.h> +#include <mach/time.h> -#include "clock.h" #include "mux.h" #define DA850_PLL1_BASE 0x01e1a000 @@ -40,550 +44,6 @@ #define DA850_REF_FREQ 24000000 -#define CFGCHIP3_ASYNC3_CLKSRC BIT(4) -#define CFGCHIP3_PLL1_MASTER_LOCK BIT(5) -#define CFGCHIP0_PLL_MASTER_LOCK BIT(4) - -static int da850_set_armrate(struct clk *clk, unsigned long rate); -static int da850_round_armrate(struct clk *clk, unsigned long rate); -static int da850_set_pll0rate(struct clk *clk, unsigned long armrate); - -static struct pll_data pll0_data = { - .num = 1, - .phys_base = DA8XX_PLL0_BASE, - .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - .rate = DA850_REF_FREQ, - .set_rate = davinci_simple_set_rate, -}; - -static struct clk pll0_clk = { - .name = "pll0", - .parent = &ref_clk, - .pll_data = &pll0_data, - .flags = CLK_PLL, - .set_rate = da850_set_pll0rate, -}; - -static struct clk pll0_aux_clk = { - .name = "pll0_aux_clk", - .parent = &pll0_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll0_sysclk1 = { - .name = "pll0_sysclk1", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll0_sysclk2 = { - .name = "pll0_sysclk2", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll0_sysclk3 = { - .name = "pll0_sysclk3", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, - .set_rate = davinci_set_sysclk_rate, - .maxrate = 100000000, -}; - -static struct clk pll0_sysclk4 = { - .name = "pll0_sysclk4", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll0_sysclk5 = { - .name = "pll0_sysclk5", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll0_sysclk6 = { - .name = "pll0_sysclk6", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll0_sysclk7 = { - .name = "pll0_sysclk7", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - -static struct pll_data pll1_data = { - .num = 2, - .phys_base = DA850_PLL1_BASE, - .flags = PLL_HAS_POSTDIV, -}; - -static struct clk pll1_clk = { - .name = "pll1", - .parent = &ref_clk, - .pll_data = &pll1_data, - .flags = CLK_PLL, -}; - -static struct clk pll1_aux_clk = { - .name = "pll1_aux_clk", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll1_sysclk2 = { - .name = "pll1_sysclk2", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll1_sysclk3 = { - .name = "pll1_sysclk3", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static int da850_async3_set_parent(struct clk *clk, struct clk *parent) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); - - if (parent == &pll0_sysclk2) { - val &= ~CFGCHIP3_ASYNC3_CLKSRC; - } else if (parent == &pll1_sysclk2) { - val |= CFGCHIP3_ASYNC3_CLKSRC; - } else { - pr_err("Bad parent on async3 clock mux\n"); - return -EINVAL; - } - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); - - return 0; -} - -static struct clk async3_clk = { - .name = "async3", - .parent = &pll1_sysclk2, - .set_parent = da850_async3_set_parent, -}; - -static struct clk i2c0_clk = { - .name = "i2c0", - .parent = &pll0_aux_clk, -}; - -static struct clk timerp64_0_clk = { - .name = "timer0", - .parent = &pll0_aux_clk, -}; - -static struct clk timerp64_1_clk = { - .name = "timer1", - .parent = &pll0_aux_clk, -}; - -static struct clk arm_rom_clk = { - .name = "arm_rom", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_ARM_RAM_ROM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk tpcc0_clk = { - .name = "tpcc0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPCC, - .flags = ALWAYS_ENABLED | CLK_PSC, -}; - -static struct clk tptc0_clk = { - .name = "tptc0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPTC0, - .flags = ALWAYS_ENABLED, -}; - -static struct clk tptc1_clk = { - .name = "tptc1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPTC1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk tpcc1_clk = { - .name = "tpcc1", - .parent = &pll0_sysclk2, - .lpsc = DA850_LPSC1_TPCC1, - .gpsc = 1, - .flags = CLK_PSC | ALWAYS_ENABLED, -}; - -static struct clk tptc2_clk = { - .name = "tptc2", - .parent = &pll0_sysclk2, - .lpsc = DA850_LPSC1_TPTC2, - .gpsc = 1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk pruss_clk = { - .name = "pruss", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_PRUSS, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_UART1, - .gpsc = 1, -}; - -static struct clk uart2_clk = { - .name = "uart2", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_UART2, - .gpsc = 1, -}; - -static struct clk aintc_clk = { - .name = "aintc", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC0_AINTC, - .flags = ALWAYS_ENABLED, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_GPIO, - .gpsc = 1, -}; - -static struct clk i2c1_clk = { - .name = "i2c1", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_I2C, - .gpsc = 1, -}; - -static struct clk emif3_clk = { - .name = "emif3", - .parent = &pll0_sysclk5, - .lpsc = DA8XX_LPSC1_EMIF3C, - .gpsc = 1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk arm_clk = { - .name = "arm", - .parent = &pll0_sysclk6, - .lpsc = DA8XX_LPSC0_ARM, - .flags = ALWAYS_ENABLED, - .set_rate = da850_set_armrate, - .round_rate = da850_round_armrate, -}; - -static struct clk rmii_clk = { - .name = "rmii", - .parent = &pll0_sysclk7, -}; - -static struct clk emac_clk = { - .name = "emac", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_CPGMAC, - .gpsc = 1, -}; - -/* - * In order to avoid adding the emac_clk to the clock lookup table twice (and - * screwing up the linked list in the process) create a separate clock for - * mdio inheriting the rate from emac_clk. - */ -static struct clk mdio_clk = { - .name = "mdio", - .parent = &emac_clk, -}; - -static struct clk mcasp_clk = { - .name = "mcasp", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_McASP0, - .gpsc = 1, -}; - -static struct clk mcbsp0_clk = { - .name = "mcbsp0", - .parent = &async3_clk, - .lpsc = DA850_LPSC1_McBSP0, - .gpsc = 1, -}; - -static struct clk mcbsp1_clk = { - .name = "mcbsp1", - .parent = &async3_clk, - .lpsc = DA850_LPSC1_McBSP1, - .gpsc = 1, -}; - -static struct clk lcdc_clk = { - .name = "lcdc", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_LCDC, - .gpsc = 1, -}; - -static struct clk mmcsd0_clk = { - .name = "mmcsd0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_MMC_SD, -}; - -static struct clk mmcsd1_clk = { - .name = "mmcsd1", - .parent = &pll0_sysclk2, - .lpsc = DA850_LPSC1_MMC_SD1, - .gpsc = 1, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll0_sysclk3, - .lpsc = DA8XX_LPSC0_EMIF25, - .flags = ALWAYS_ENABLED, -}; - -/* - * In order to avoid adding the aemif_clk to the clock lookup table twice (and - * screwing up the linked list in the process) create a separate clock for - * nand inheriting the rate from aemif_clk. - */ -static struct clk aemif_nand_clk = { - .name = "nand", - .parent = &aemif_clk, -}; - -static struct clk usb11_clk = { - .name = "usb11", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_USB11, - .gpsc = 1, -}; - -static struct clk usb20_clk = { - .name = "usb20", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_USB20, - .gpsc = 1, -}; - -static struct clk cppi41_clk = { - .name = "cppi41", - .parent = &usb20_clk, -}; - -static struct clk spi0_clk = { - .name = "spi0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_SPI0, -}; - -static struct clk spi1_clk = { - .name = "spi1", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_SPI1, - .gpsc = 1, -}; - -static struct clk vpif_clk = { - .name = "vpif", - .parent = &pll0_sysclk2, - .lpsc = DA850_LPSC1_VPIF, - .gpsc = 1, -}; - -static struct clk sata_clk = { - .name = "sata", - .parent = &pll0_sysclk2, - .lpsc = DA850_LPSC1_SATA, - .gpsc = 1, - .flags = PSC_FORCE, -}; - -static struct clk dsp_clk = { - .name = "dsp", - .parent = &pll0_sysclk1, - .domain = DAVINCI_GPSC_DSPDOMAIN, - .lpsc = DA8XX_LPSC0_GEM, - .flags = PSC_LRST | PSC_FORCE, -}; - -static struct clk ehrpwm_clk = { - .name = "ehrpwm", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_PWM, - .gpsc = 1, -}; - -static struct clk ehrpwm0_clk = { - .name = "ehrpwm0", - .parent = &ehrpwm_clk, -}; - -static struct clk ehrpwm1_clk = { - .name = "ehrpwm1", - .parent = &ehrpwm_clk, -}; - -#define DA8XX_EHRPWM_TBCLKSYNC BIT(12) - -static void ehrpwm_tblck_enable(struct clk *clk) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); - val |= DA8XX_EHRPWM_TBCLKSYNC; - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); -} - -static void ehrpwm_tblck_disable(struct clk *clk) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); - val &= ~DA8XX_EHRPWM_TBCLKSYNC; - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); -} - -static struct clk ehrpwm_tbclk = { - .name = "ehrpwm_tbclk", - .parent = &ehrpwm_clk, - .clk_enable = ehrpwm_tblck_enable, - .clk_disable = ehrpwm_tblck_disable, -}; - -static struct clk ehrpwm0_tbclk = { - .name = "ehrpwm0_tbclk", - .parent = &ehrpwm_tbclk, -}; - -static struct clk ehrpwm1_tbclk = { - .name = "ehrpwm1_tbclk", - .parent = &ehrpwm_tbclk, -}; - -static struct clk ecap_clk = { - .name = "ecap", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_ECAP, - .gpsc = 1, -}; - -static struct clk ecap0_clk = { - .name = "ecap0_clk", - .parent = &ecap_clk, -}; - -static struct clk ecap1_clk = { - .name = "ecap1_clk", - .parent = &ecap_clk, -}; - -static struct clk ecap2_clk = { - .name = "ecap2_clk", - .parent = &ecap_clk, -}; - -static struct clk_lookup da850_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "pll0", &pll0_clk), - CLK(NULL, "pll0_aux", &pll0_aux_clk), - CLK(NULL, "pll0_sysclk1", &pll0_sysclk1), - CLK(NULL, "pll0_sysclk2", &pll0_sysclk2), - CLK(NULL, "pll0_sysclk3", &pll0_sysclk3), - CLK(NULL, "pll0_sysclk4", &pll0_sysclk4), - CLK(NULL, "pll0_sysclk5", &pll0_sysclk5), - CLK(NULL, "pll0_sysclk6", &pll0_sysclk6), - CLK(NULL, "pll0_sysclk7", &pll0_sysclk7), - CLK(NULL, "pll1", &pll1_clk), - CLK(NULL, "pll1_aux", &pll1_aux_clk), - CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), - CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "async3", &async3_clk), - CLK("i2c_davinci.1", NULL, &i2c0_clk), - CLK(NULL, "timer0", &timerp64_0_clk), - CLK("davinci-wdt", NULL, &timerp64_1_clk), - CLK(NULL, "arm_rom", &arm_rom_clk), - CLK(NULL, "tpcc0", &tpcc0_clk), - CLK(NULL, "tptc0", &tptc0_clk), - CLK(NULL, "tptc1", &tptc1_clk), - CLK(NULL, "tpcc1", &tpcc1_clk), - CLK(NULL, "tptc2", &tptc2_clk), - CLK("pruss_uio", "pruss", &pruss_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("serial8250.2", NULL, &uart2_clk), - CLK(NULL, "aintc", &aintc_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK("i2c_davinci.2", NULL, &i2c1_clk), - CLK(NULL, "emif3", &emif3_clk), - CLK(NULL, "arm", &arm_clk), - CLK(NULL, "rmii", &rmii_clk), - CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &mdio_clk), - CLK("davinci-mcasp.0", NULL, &mcasp_clk), - CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk), - CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk), - CLK("da8xx_lcdc.0", "fck", &lcdc_clk), - CLK("da830-mmc.0", NULL, &mmcsd0_clk), - CLK("da830-mmc.1", NULL, &mmcsd1_clk), - CLK("ti-aemif", NULL, &aemif_clk), - CLK("davinci-nand.0", "aemif", &aemif_nand_clk), - CLK("ohci-da8xx", NULL, &usb11_clk), - CLK("musb-da8xx", NULL, &usb20_clk), - CLK("cppi41-dmaengine", NULL, &cppi41_clk), - CLK("spi_davinci.0", NULL, &spi0_clk), - CLK("spi_davinci.1", NULL, &spi1_clk), - CLK("vpif", NULL, &vpif_clk), - CLK("ahci_da850", "fck", &sata_clk), - CLK("davinci-rproc.0", NULL, &dsp_clk), - CLK(NULL, NULL, &ehrpwm_clk), - CLK("ehrpwm.0", "fck", &ehrpwm0_clk), - CLK("ehrpwm.1", "fck", &ehrpwm1_clk), - CLK(NULL, NULL, &ehrpwm_tbclk), - CLK("ehrpwm.0", "tbclk", &ehrpwm0_tbclk), - CLK("ehrpwm.1", "tbclk", &ehrpwm1_tbclk), - CLK(NULL, NULL, &ecap_clk), - CLK("ecap.0", "fck", &ecap0_clk), - CLK("ecap.1", "fck", &ecap1_clk), - CLK("ecap.2", "fck", &ecap2_clk), - CLK(NULL, NULL, NULL), -}; - /* * Device specific mux setup * @@ -958,8 +418,6 @@ static struct map_desc da850_io_desc[] = { }, }; -static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE }; - /* Contents of JTAG ID register used to identify exact cpu type */ static struct davinci_id da850_ids[] = { { @@ -1169,89 +627,11 @@ int da850_register_cpufreq(char *async_clk) return platform_device_register(&da850_cpufreq_device); } - -static int da850_round_armrate(struct clk *clk, unsigned long rate) -{ - int ret = 0, diff; - unsigned int best = (unsigned int) -1; - struct cpufreq_frequency_table *table = cpufreq_info.freq_table; - struct cpufreq_frequency_table *pos; - - rate /= 1000; /* convert to kHz */ - - cpufreq_for_each_entry(pos, table) { - diff = pos->frequency - rate; - if (diff < 0) - diff = -diff; - - if (diff < best) { - best = diff; - ret = pos->frequency; - } - } - - return ret * 1000; -} - -static int da850_set_armrate(struct clk *clk, unsigned long index) -{ - struct clk *pllclk = &pll0_clk; - - return clk_set_rate(pllclk, index); -} - -static int da850_set_pll0rate(struct clk *clk, unsigned long rate) -{ - struct pll_data *pll = clk->pll_data; - struct cpufreq_frequency_table *freq; - unsigned int prediv, mult, postdiv; - struct da850_opp *opp = NULL; - int ret; - - rate /= 1000; - - for (freq = da850_freq_table; - freq->frequency != CPUFREQ_TABLE_END; freq++) { - /* rate is in Hz, freq->frequency is in KHz */ - if (freq->frequency == rate) { - opp = (struct da850_opp *)freq->driver_data; - break; - } - } - - if (!opp) - return -EINVAL; - - prediv = opp->prediv; - mult = opp->mult; - postdiv = opp->postdiv; - - ret = davinci_set_pllrate(pll, prediv, mult, postdiv); - if (WARN_ON(ret)) - return ret; - - return 0; -} #else int __init da850_register_cpufreq(char *async_clk) { return 0; } - -static int da850_set_armrate(struct clk *clk, unsigned long rate) -{ - return -EINVAL; -} - -static int da850_set_pll0rate(struct clk *clk, unsigned long armrate) -{ - return -EINVAL; -} - -static int da850_round_armrate(struct clk *clk, unsigned long rate) -{ - return clk->rate; -} #endif /* VPIF resource, platform data */ @@ -1353,8 +733,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = { .jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG, .ids = da850_ids, .ids_num = ARRAY_SIZE(da850_ids), - .psc_bases = da850_psc_bases, - .psc_bases_num = ARRAY_SIZE(da850_psc_bases), .pinmux_base = DA8XX_SYSCFG0_BASE + 0x120, .pinmux_pins = da850_pins, .pinmux_pins_num = ARRAY_SIZE(da850_pins), @@ -1370,8 +748,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = { void __init da850_init(void) { - unsigned int v; - davinci_common_init(&davinci_soc_info_da850); da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K); @@ -1379,22 +755,124 @@ void __init da850_init(void) return; da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K); - if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module")) - return; + WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"); +} + +void __init da850_init_time(void) +{ + void __iomem *pll0; + struct regmap *cfgchip; + struct clk *clk; - /* Unlock writing to PLL0 registers */ - v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG)); - v &= ~CFGCHIP0_PLL_MASTER_LOCK; - __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG)); + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ); - /* Unlock writing to PLL1 registers */ - v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); - v &= ~CFGCHIP3_PLL1_MASTER_LOCK; - __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); + pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K); + cfgchip = da8xx_get_cfgchip(); + + da850_pll0_init(NULL, pll0, cfgchip); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); } -void __init da850_init_time(void) +static struct resource da850_pll1_resources[] = { + { + .start = DA850_PLL1_BASE, + .end = DA850_PLL1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct davinci_pll_platform_data da850_pll1_pdata; + +static struct platform_device da850_pll1_device = { + .name = "da850-pll1", + .id = -1, + .resource = da850_pll1_resources, + .num_resources = ARRAY_SIZE(da850_pll1_resources), + .dev = { + .platform_data = &da850_pll1_pdata, + }, +}; + +static struct resource da850_psc0_resources[] = { + { + .start = DA8XX_PSC0_BASE, + .end = DA8XX_PSC0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da850_psc0_device = { + .name = "da850-psc0", + .id = -1, + .resource = da850_psc0_resources, + .num_resources = ARRAY_SIZE(da850_psc0_resources), +}; + +static struct resource da850_psc1_resources[] = { + { + .start = DA8XX_PSC1_BASE, + .end = DA8XX_PSC1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da850_psc1_device = { + .name = "da850-psc1", + .id = -1, + .resource = da850_psc1_resources, + .num_resources = ARRAY_SIZE(da850_psc1_resources), +}; + +static struct da8xx_cfgchip_clk_platform_data da850_async1_pdata; + +static struct platform_device da850_async1_clksrc_device = { + .name = "da850-async1-clksrc", + .id = -1, + .dev = { + .platform_data = &da850_async1_pdata, + }, +}; + +static struct da8xx_cfgchip_clk_platform_data da850_async3_pdata; + +static struct platform_device da850_async3_clksrc_device = { + .name = "da850-async3-clksrc", + .id = -1, + .dev = { + .platform_data = &da850_async3_pdata, + }, +}; + +static struct da8xx_cfgchip_clk_platform_data da850_tbclksync_pdata; + +static struct platform_device da850_tbclksync_device = { + .name = "da830-tbclksync", + .id = -1, + .dev = { + .platform_data = &da850_tbclksync_pdata, + }, +}; + +void __init da850_register_clocks(void) { - davinci_clk_init(da850_clks); - davinci_timer_init(); + /* PLL0 is registered in da850_init_time() */ + + da850_pll1_pdata.cfgchip = da8xx_get_cfgchip(); + platform_device_register(&da850_pll1_device); + + da850_async1_pdata.cfgchip = da8xx_get_cfgchip(); + platform_device_register(&da850_async1_clksrc_device); + + da850_async3_pdata.cfgchip = da8xx_get_cfgchip(); + platform_device_register(&da850_async3_clksrc_device); + + platform_device_register(&da850_psc0_device); + + platform_device_register(&da850_psc1_device); + + da850_tbclksync_pdata.cfgchip = da8xx_get_cfgchip(); + platform_device_register(&da850_tbclksync_device); } diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index ab199f4b9ce4..beac80ec4037 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -7,81 +7,16 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/io.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/irqdomain.h> -#include <linux/platform_data/ti-aemif.h> #include <asm/mach/arch.h> #include <mach/common.h> -#include "cp_intc.h" #include <mach/da8xx.h> -static struct of_dev_auxdata da850_aemif_auxdata_lookup[] = { - OF_DEV_AUXDATA("ti,davinci-nand", 0x62000000, "davinci-nand.0", NULL), - {} -}; - -static struct aemif_platform_data aemif_data = { - .dev_lookup = da850_aemif_auxdata_lookup, -}; - -static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL), - OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL), - OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL), - OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL), - OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm.0", NULL), - OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm.1", NULL), - OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap.0", NULL), - OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap.1", NULL), - OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap.2", NULL), - OF_DEV_AUXDATA("ti,da830-spi", 0x01c41000, "spi_davinci.0", NULL), - OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL), - OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL), - OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL), - OF_DEV_AUXDATA("ns16550a", 0x01d0d000, "serial8250.2", NULL), - OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL), - OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1", - NULL), - OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL), - OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", &aemif_data), - OF_DEV_AUXDATA("ti,da850-tilcdc", 0x01e13000, "da8xx_lcdc.0", NULL), - OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci-da8xx", NULL), - OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL), - OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL), - OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL), - OF_DEV_AUXDATA("ti,da850-vpif", 0x01e17000, "vpif", NULL), - OF_DEV_AUXDATA("ti,da850-dsp", 0x11800000, "davinci-rproc.0", NULL), - {} -}; - #ifdef CONFIG_ARCH_DAVINCI_DA850 static void __init da850_init_machine(void) { - /* All existing boards use 100MHz SATA refclkpn */ - static const unsigned long sata_refclkpn = 100 * 1000 * 1000; - - int ret; - - ret = da8xx_register_usb20_phy_clk(false); - if (ret) - pr_warn("%s: registering USB 2.0 PHY clock failed: %d", - __func__, ret); - ret = da8xx_register_usb11_phy_clk(false); - if (ret) - pr_warn("%s: registering USB 1.1 PHY clock failed: %d", - __func__, ret); - - ret = da850_register_sata_refclk(sata_refclkpn); - if (ret) - pr_warn("%s: registering SATA REFCLK failed: %d", - __func__, ret); - - of_platform_default_populate(NULL, da850_auxdata_lookup, NULL); davinci_pm_init(); pdata_quirks_init(); } @@ -96,7 +31,6 @@ static const char *const da850_boards_compat[] __initconst = { DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x") .map_io = da850_init, - .init_time = da850_init_time, .init_machine = da850_init_machine, .dt_compat = da850_boards_compat, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 376cdd51ce9d..db4c95ef4d5c 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -35,6 +35,10 @@ #include <media/davinci/vpbe.h> #include <media/davinci/vpbe_osd.h> +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01c41000 + #define DAVINCI_SYSTEM_MODULE_BASE 0x01c40000 #define SYSMOD_VDAC_CONFIG 0x2c #define SYSMOD_VIDCLKCTL 0x38 @@ -84,6 +88,7 @@ int davinci_init_wdt(void); /* DM355 function declarations */ void dm355_init(void); void dm355_init_time(void); +void dm355_register_clocks(void); void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); void dm355_init_asp1(u32 evt_enable); @@ -93,6 +98,7 @@ int dm355_gpio_register(void); /* DM365 function declarations */ void dm365_init(void); void dm365_init_time(void); +void dm365_register_clocks(void); void dm365_init_asp(void); void dm365_init_vc(void); void dm365_init_ks(struct davinci_ks_platform_data *pdata); @@ -106,6 +112,7 @@ int dm365_gpio_register(void); void dm644x_init(void); void dm644x_init_devices(void); void dm644x_init_time(void); +void dm644x_register_clocks(void); void dm644x_init_asp(void); int dm644x_init_video(struct vpfe_config *, struct vpbe_config *); int dm644x_gpio_register(void); @@ -113,6 +120,7 @@ int dm644x_gpio_register(void); /* DM646x function declarations */ void dm646x_init(void); void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate); +void dm646x_register_clocks(void); void dm646x_init_mcasp0(struct snd_platform_data *pdata); void dm646x_init_mcasp1(struct snd_platform_data *pdata); int dm646x_init_edma(struct edma_rsv_info *rsv); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 78390c64e6ca..1fd3619f6a09 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -10,25 +10,25 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/dma-contiguous.h> -#include <linux/serial_8250.h> #include <linux/ahci_platform.h> +#include <linux/clk-provider.h> #include <linux/clk.h> -#include <linux/reboot.h> +#include <linux/clkdev.h> +#include <linux/dma-contiguous.h> #include <linux/dmaengine.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/serial_8250.h> -#include <mach/cputype.h> #include <mach/common.h> -#include <mach/time.h> +#include <mach/cputype.h> #include <mach/da8xx.h> -#include <mach/clock.h> -#include "cpuidle.h" -#include "sram.h" +#include <mach/time.h> -#include "clock.h" #include "asp.h" +#include "cpuidle.h" +#include "sram.h" #define DA8XX_TPCC_BASE 0x01c00000 #define DA8XX_TPTC0_BASE 0x01c08000 @@ -1040,26 +1040,15 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect) } #ifdef CONFIG_ARCH_DAVINCI_DA850 -static struct clk sata_refclk = { - .name = "sata_refclk", - .set_rate = davinci_simple_set_rate, -}; - -static struct clk_lookup sata_refclk_lookup = - CLK("ahci_da850", "refclk", &sata_refclk); - int __init da850_register_sata_refclk(int rate) { - int ret; - - sata_refclk.rate = rate; - ret = clk_register(&sata_refclk); - if (ret) - return ret; + struct clk *clk; - clkdev_add(&sata_refclk_lookup); + clk = clk_register_fixed_rate(NULL, "sata_refclk", NULL, 0, rate); + if (IS_ERR(clk)) + return PTR_ERR(clk); - return 0; + return clk_register_clkdev(clk, "refclk", "ahci_da850"); } static struct resource da850_sata_resources[] = { diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 0edda4093e47..e8dbbb7479ab 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -26,7 +26,6 @@ #include "davinci.h" -#include "clock.h" #define DAVINCI_I2C_BASE 0x01C21000 #define DAVINCI_ATA_BASE 0x01C66000 diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index f29480495c18..9f7d38d12c88 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -8,31 +8,32 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/serial_8250.h> -#include <linux/platform_device.h> + +#include <linux/clk-provider.h> +#include <linux/clk/davinci.h> +#include <linux/clkdev.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> -#include <linux/spi/spi.h> +#include <linux/init.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/spi-davinci.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/spi/spi.h> #include <asm/mach/map.h> +#include <mach/common.h> #include <mach/cputype.h> -#include "psc.h" -#include <mach/mux.h> #include <mach/irqs.h> -#include <mach/time.h> +#include <mach/mux.h> #include <mach/serial.h> -#include <mach/common.h> +#include <mach/time.h> +#include "asp.h" #include "davinci.h" -#include "clock.h" #include "mux.h" -#include "asp.h" #define DM355_UART2_BASE (IO_PHYS + 0x206000) #define DM355_OSD_BASE (IO_PHYS + 0x70200) @@ -43,348 +44,6 @@ */ #define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */ -static struct pll_data pll1_data = { - .num = 1, - .phys_base = DAVINCI_PLL1_BASE, - .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, -}; - -static struct pll_data pll2_data = { - .num = 2, - .phys_base = DAVINCI_PLL2_BASE, - .flags = PLL_HAS_PREDIV, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - /* FIXME -- crystal rate is board-specific */ - .rate = DM355_REF_FREQ, -}; - -static struct clk pll1_clk = { - .name = "pll1", - .parent = &ref_clk, - .flags = CLK_PLL, - .pll_data = &pll1_data, -}; - -static struct clk pll1_aux_clk = { - .name = "pll1_aux_clk", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll1_sysclk1 = { - .name = "pll1_sysclk1", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll1_sysclk2 = { - .name = "pll1_sysclk2", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll1_sysclk3 = { - .name = "pll1_sysclk3", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclkbp = { - .name = "pll1_sysclkbp", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV -}; - -static struct clk vpss_dac_clk = { - .name = "vpss_dac", - .parent = &pll1_sysclk3, - .lpsc = DM355_LPSC_VPSS_DAC, -}; - -static struct clk vpss_master_clk = { - .name = "vpss_master", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_VPSSMSTR, - .flags = CLK_PSC, -}; - -static struct clk vpss_slave_clk = { - .name = "vpss_slave", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_VPSSSLV, -}; - -static struct clk clkout1_clk = { - .name = "clkout1", - .parent = &pll1_aux_clk, - /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */ -}; - -static struct clk clkout2_clk = { - .name = "clkout2", - .parent = &pll1_sysclkbp, -}; - -static struct clk pll2_clk = { - .name = "pll2", - .parent = &ref_clk, - .flags = CLK_PLL, - .pll_data = &pll2_data, -}; - -static struct clk pll2_sysclk1 = { - .name = "pll2_sysclk1", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll2_sysclkbp = { - .name = "pll2_sysclkbp", - .parent = &pll2_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV -}; - -static struct clk clkout3_clk = { - .name = "clkout3", - .parent = &pll2_sysclkbp, - /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */ -}; - -static struct clk arm_clk = { - .name = "arm_clk", - .parent = &pll1_sysclk1, - .lpsc = DAVINCI_LPSC_ARM, - .flags = ALWAYS_ENABLED, -}; - -/* - * NOT LISTED below, and not touched by Linux - * - in SyncReset state by default - * .lpsc = DAVINCI_LPSC_TPCC, - * .lpsc = DAVINCI_LPSC_TPTC0, - * .lpsc = DAVINCI_LPSC_TPTC1, - * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk, - * .lpsc = DAVINCI_LPSC_MEMSTICK, - * - in Enabled state by default - * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS, - * .lpsc = DAVINCI_LPSC_SCR2, // "bus" - * .lpsc = DAVINCI_LPSC_SCR3, // "bus" - * .lpsc = DAVINCI_LPSC_SCR4, // "bus" - * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation" - * .lpsc = DAVINCI_LPSC_CFG27, // "test" - * .lpsc = DAVINCI_LPSC_CFG3, // "test" - * .lpsc = DAVINCI_LPSC_CFG5, // "test" - */ - -static struct clk mjcp_clk = { - .name = "mjcp", - .parent = &pll1_sysclk1, - .lpsc = DAVINCI_LPSC_IMCOP, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART1, -}; - -static struct clk uart2_clk = { - .name = "uart2", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_UART2, -}; - -static struct clk i2c_clk = { - .name = "i2c", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_I2C, -}; - -static struct clk asp0_clk = { - .name = "asp0", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_McBSP, -}; - -static struct clk asp1_clk = { - .name = "asp1", - .parent = &pll1_sysclk2, - .lpsc = DM355_LPSC_McBSP1, -}; - -static struct clk mmcsd0_clk = { - .name = "mmcsd0", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_MMC_SD, -}; - -static struct clk mmcsd1_clk = { - .name = "mmcsd1", - .parent = &pll1_sysclk2, - .lpsc = DM355_LPSC_MMC_SD1, -}; - -static struct clk spi0_clk = { - .name = "spi0", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_SPI, -}; - -static struct clk spi1_clk = { - .name = "spi1", - .parent = &pll1_sysclk2, - .lpsc = DM355_LPSC_SPI1, -}; - -static struct clk spi2_clk = { - .name = "spi2", - .parent = &pll1_sysclk2, - .lpsc = DM355_LPSC_SPI2, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_GPIO, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_AEMIF, -}; - -static struct clk pwm0_clk = { - .name = "pwm0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM0, -}; - -static struct clk pwm1_clk = { - .name = "pwm1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM1, -}; - -static struct clk pwm2_clk = { - .name = "pwm2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM2, -}; - -static struct clk pwm3_clk = { - .name = "pwm3", - .parent = &pll1_aux_clk, - .lpsc = DM355_LPSC_PWM3, -}; - -static struct clk timer0_clk = { - .name = "timer0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER0, -}; - -static struct clk timer1_clk = { - .name = "timer1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER1, -}; - -static struct clk timer2_clk = { - .name = "timer2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why can't this be disabled? */ -}; - -static struct clk timer3_clk = { - .name = "timer3", - .parent = &pll1_aux_clk, - .lpsc = DM355_LPSC_TIMER3, -}; - -static struct clk rto_clk = { - .name = "rto", - .parent = &pll1_aux_clk, - .lpsc = DM355_LPSC_RTO, -}; - -static struct clk usb_clk = { - .name = "usb", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_USB, -}; - -static struct clk_lookup dm355_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "pll1", &pll1_clk), - CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), - CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), - CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), - CLK(NULL, "pll1_aux", &pll1_aux_clk), - CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), - CLK(NULL, "vpss_dac", &vpss_dac_clk), - CLK("vpss", "master", &vpss_master_clk), - CLK("vpss", "slave", &vpss_slave_clk), - CLK(NULL, "clkout1", &clkout1_clk), - CLK(NULL, "clkout2", &clkout2_clk), - CLK(NULL, "pll2", &pll2_clk), - CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), - CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), - CLK(NULL, "clkout3", &clkout3_clk), - CLK(NULL, "arm", &arm_clk), - CLK(NULL, "mjcp", &mjcp_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("serial8250.2", NULL, &uart2_clk), - CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("davinci-mcbsp.0", NULL, &asp0_clk), - CLK("davinci-mcbsp.1", NULL, &asp1_clk), - CLK("dm6441-mmc.0", NULL, &mmcsd0_clk), - CLK("dm6441-mmc.1", NULL, &mmcsd1_clk), - CLK("spi_davinci.0", NULL, &spi0_clk), - CLK("spi_davinci.1", NULL, &spi1_clk), - CLK("spi_davinci.2", NULL, &spi2_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK(NULL, "aemif", &aemif_clk), - CLK(NULL, "pwm0", &pwm0_clk), - CLK(NULL, "pwm1", &pwm1_clk), - CLK(NULL, "pwm2", &pwm2_clk), - CLK(NULL, "pwm3", &pwm3_clk), - CLK(NULL, "timer0", &timer0_clk), - CLK(NULL, "timer1", &timer1_clk), - CLK("davinci-wdt", NULL, &timer2_clk), - CLK(NULL, "timer3", &timer3_clk), - CLK(NULL, "rto", &rto_clk), - CLK(NULL, "usb", &usb_clk), - CLK(NULL, NULL, NULL), -}; - -/*----------------------------------------------------------------------*/ - static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32); static struct resource dm355_spi0_resources[] = { @@ -926,8 +585,6 @@ static struct davinci_id dm355_ids[] = { }, }; -static u32 dm355_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE }; - /* * T0_BOT: Timer 0, bottom: clockevent source for hrtimers * T0_TOP: Timer 0, top : clocksource for generic timekeeping @@ -1012,8 +669,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = { .jtag_id_reg = 0x01c40028, .ids = dm355_ids, .ids_num = ARRAY_SIZE(dm355_ids), - .psc_bases = dm355_psc_bases, - .psc_bases_num = ARRAY_SIZE(dm355_psc_bases), .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm355_pins, .pinmux_pins_num = ARRAY_SIZE(dm355_pins), @@ -1046,8 +701,41 @@ void __init dm355_init(void) void __init dm355_init_time(void) { - davinci_clk_init(dm355_clks); - davinci_timer_init(); + void __iomem *pll1, *psc; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ); + + pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); + dm355_pll1_init(NULL, pll1, NULL); + + psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); + dm355_psc_init(NULL, psc); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +static struct resource dm355_pll2_resources[] = { + { + .start = DAVINCI_PLL2_BASE, + .end = DAVINCI_PLL2_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm355_pll2_device = { + .name = "dm355-pll2", + .id = -1, + .resource = dm355_pll2_resources, + .num_resources = ARRAY_SIZE(dm355_pll2_resources), +}; + +void __init dm355_register_clocks(void) +{ + /* PLL1 and PSC are registered in dm355_init_time() */ + platform_device_register(&dm355_pll2_device); } int __init dm355_init_video(struct vpfe_config *vpfe_cfg, diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 1e3df9df1e10..abcf2a5ed89b 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -12,32 +12,33 @@ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/serial_8250.h> -#include <linux/platform_device.h> + +#include <linux/clk-provider.h> +#include <linux/clk/davinci.h> +#include <linux/clkdev.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> -#include <linux/spi/spi.h> +#include <linux/init.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> #include <linux/platform_data/keyscan-davinci.h> #include <linux/platform_data/spi-davinci.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/spi/spi.h> #include <asm/mach/map.h> +#include <mach/common.h> #include <mach/cputype.h> -#include "psc.h" -#include <mach/mux.h> #include <mach/irqs.h> -#include <mach/time.h> +#include <mach/mux.h> #include <mach/serial.h> -#include <mach/common.h> +#include <mach/time.h> +#include "asp.h" #include "davinci.h" -#include "clock.h" #include "mux.h" -#include "asp.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ #define DM365_RTC_BASE 0x01c69000 @@ -54,440 +55,6 @@ #define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000 #define DM365_EMAC_CNTRL_RAM_SIZE 0x2000 -static struct pll_data pll1_data = { - .num = 1, - .phys_base = DAVINCI_PLL1_BASE, - .flags = PLL_HAS_POSTDIV | PLL_HAS_PREDIV, -}; - -static struct pll_data pll2_data = { - .num = 2, - .phys_base = DAVINCI_PLL2_BASE, - .flags = PLL_HAS_POSTDIV | PLL_HAS_PREDIV, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - .rate = DM365_REF_FREQ, -}; - -static struct clk pll1_clk = { - .name = "pll1", - .parent = &ref_clk, - .flags = CLK_PLL, - .pll_data = &pll1_data, -}; - -static struct clk pll1_aux_clk = { - .name = "pll1_aux_clk", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll1_sysclkbp = { - .name = "pll1_sysclkbp", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV -}; - -static struct clk clkout0_clk = { - .name = "clkout0", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll1_sysclk1 = { - .name = "pll1_sysclk1", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll1_sysclk2 = { - .name = "pll1_sysclk2", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll1_sysclk3 = { - .name = "pll1_sysclk3", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_sysclk6 = { - .name = "pll1_sysclk6", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll1_sysclk7 = { - .name = "pll1_sysclk7", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - -static struct clk pll1_sysclk8 = { - .name = "pll1_sysclk8", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV8, -}; - -static struct clk pll1_sysclk9 = { - .name = "pll1_sysclk9", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV9, -}; - -static struct clk pll2_clk = { - .name = "pll2", - .parent = &ref_clk, - .flags = CLK_PLL, - .pll_data = &pll2_data, -}; - -static struct clk pll2_aux_clk = { - .name = "pll2_aux_clk", - .parent = &pll2_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk clkout1_clk = { - .name = "clkout1", - .parent = &pll2_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll2_sysclk1 = { - .name = "pll2_sysclk1", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll2_sysclk2 = { - .name = "pll2_sysclk2", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll2_sysclk3 = { - .name = "pll2_sysclk3", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll2_sysclk4 = { - .name = "pll2_sysclk4", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll2_sysclk5 = { - .name = "pll2_sysclk5", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll2_sysclk6 = { - .name = "pll2_sysclk6", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll2_sysclk7 = { - .name = "pll2_sysclk7", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - -static struct clk pll2_sysclk8 = { - .name = "pll2_sysclk8", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV8, -}; - -static struct clk pll2_sysclk9 = { - .name = "pll2_sysclk9", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV9, -}; - -static struct clk vpss_dac_clk = { - .name = "vpss_dac", - .parent = &pll1_sysclk3, - .lpsc = DM365_LPSC_DAC_CLK, -}; - -static struct clk vpss_master_clk = { - .name = "vpss_master", - .parent = &pll1_sysclk5, - .lpsc = DM365_LPSC_VPSSMSTR, - .flags = CLK_PSC, -}; - -static struct clk vpss_slave_clk = { - .name = "vpss_slave", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_VPSSSLV, -}; - -static struct clk arm_clk = { - .name = "arm_clk", - .parent = &pll2_sysclk2, - .lpsc = DAVINCI_LPSC_ARM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_UART1, -}; - -static struct clk i2c_clk = { - .name = "i2c", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_I2C, -}; - -static struct clk mmcsd0_clk = { - .name = "mmcsd0", - .parent = &pll1_sysclk8, - .lpsc = DAVINCI_LPSC_MMC_SD, -}; - -static struct clk mmcsd1_clk = { - .name = "mmcsd1", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_MMC_SD1, -}; - -static struct clk spi0_clk = { - .name = "spi0", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_SPI, -}; - -static struct clk spi1_clk = { - .name = "spi1", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_SPI1, -}; - -static struct clk spi2_clk = { - .name = "spi2", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_SPI2, -}; - -static struct clk spi3_clk = { - .name = "spi3", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_SPI3, -}; - -static struct clk spi4_clk = { - .name = "spi4", - .parent = &pll1_aux_clk, - .lpsc = DM365_LPSC_SPI4, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_GPIO, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_AEMIF, -}; - -static struct clk pwm0_clk = { - .name = "pwm0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM0, -}; - -static struct clk pwm1_clk = { - .name = "pwm1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM1, -}; - -static struct clk pwm2_clk = { - .name = "pwm2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM2, -}; - -static struct clk pwm3_clk = { - .name = "pwm3", - .parent = &ref_clk, - .lpsc = DM365_LPSC_PWM3, -}; - -static struct clk timer0_clk = { - .name = "timer0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER0, -}; - -static struct clk timer1_clk = { - .name = "timer1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER1, -}; - -static struct clk timer2_clk = { - .name = "timer2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, -}; - -static struct clk timer3_clk = { - .name = "timer3", - .parent = &pll1_aux_clk, - .lpsc = DM365_LPSC_TIMER3, -}; - -static struct clk usb_clk = { - .name = "usb", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_USB, -}; - -static struct clk emac_clk = { - .name = "emac", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_EMAC, -}; - -static struct clk voicecodec_clk = { - .name = "voice_codec", - .parent = &pll2_sysclk4, - .lpsc = DM365_LPSC_VOICE_CODEC, -}; - -static struct clk asp0_clk = { - .name = "asp0", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_McBSP1, -}; - -static struct clk rto_clk = { - .name = "rto", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_RTO, -}; - -static struct clk mjcp_clk = { - .name = "mjcp", - .parent = &pll1_sysclk3, - .lpsc = DM365_LPSC_MJCP, -}; - -static struct clk_lookup dm365_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "pll1", &pll1_clk), - CLK(NULL, "pll1_aux", &pll1_aux_clk), - CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), - CLK(NULL, "clkout0", &clkout0_clk), - CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), - CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), - CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), - CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), - CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), - CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), - CLK(NULL, "pll1_sysclk8", &pll1_sysclk8), - CLK(NULL, "pll1_sysclk9", &pll1_sysclk9), - CLK(NULL, "pll2", &pll2_clk), - CLK(NULL, "pll2_aux", &pll2_aux_clk), - CLK(NULL, "clkout1", &clkout1_clk), - CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), - CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), - CLK(NULL, "pll2_sysclk3", &pll2_sysclk3), - CLK(NULL, "pll2_sysclk4", &pll2_sysclk4), - CLK(NULL, "pll2_sysclk5", &pll2_sysclk5), - CLK(NULL, "pll2_sysclk6", &pll2_sysclk6), - CLK(NULL, "pll2_sysclk7", &pll2_sysclk7), - CLK(NULL, "pll2_sysclk8", &pll2_sysclk8), - CLK(NULL, "pll2_sysclk9", &pll2_sysclk9), - CLK(NULL, "vpss_dac", &vpss_dac_clk), - CLK("vpss", "master", &vpss_master_clk), - CLK("vpss", "slave", &vpss_slave_clk), - CLK(NULL, "arm", &arm_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("da830-mmc.0", NULL, &mmcsd0_clk), - CLK("da830-mmc.1", NULL, &mmcsd1_clk), - CLK("spi_davinci.0", NULL, &spi0_clk), - CLK("spi_davinci.1", NULL, &spi1_clk), - CLK("spi_davinci.2", NULL, &spi2_clk), - CLK("spi_davinci.3", NULL, &spi3_clk), - CLK("spi_davinci.4", NULL, &spi4_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK(NULL, "aemif", &aemif_clk), - CLK(NULL, "pwm0", &pwm0_clk), - CLK(NULL, "pwm1", &pwm1_clk), - CLK(NULL, "pwm2", &pwm2_clk), - CLK(NULL, "pwm3", &pwm3_clk), - CLK(NULL, "timer0", &timer0_clk), - CLK(NULL, "timer1", &timer1_clk), - CLK("davinci-wdt", NULL, &timer2_clk), - CLK(NULL, "timer3", &timer3_clk), - CLK(NULL, "usb", &usb_clk), - CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), - CLK("davinci_voicecodec", NULL, &voicecodec_clk), - CLK("davinci-mcbsp", NULL, &asp0_clk), - CLK(NULL, "rto", &rto_clk), - CLK(NULL, "mjcp", &mjcp_clk), - CLK(NULL, NULL, NULL), -}; - -/*----------------------------------------------------------------------*/ - #define INTMUX 0x18 #define EVTMUX 0x1c @@ -1054,8 +621,6 @@ static struct davinci_id dm365_ids[] = { }, }; -static u32 dm365_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE }; - static struct davinci_timer_info dm365_timer_info = { .timers = davinci_timer_instance, .clockevent_id = T0_BOT, @@ -1116,8 +681,6 @@ static const struct davinci_soc_info davinci_soc_info_dm365 = { .jtag_id_reg = 0x01c40028, .ids = dm365_ids, .ids_num = ARRAY_SIZE(dm365_ids), - .psc_bases = dm365_psc_bases, - .psc_bases_num = ARRAY_SIZE(dm365_psc_bases), .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm365_pins, .pinmux_pins_num = ARRAY_SIZE(dm365_pins), @@ -1171,8 +734,28 @@ void __init dm365_init(void) void __init dm365_init_time(void) { - davinci_clk_init(dm365_clks); - davinci_timer_init(); + void __iomem *pll1, *pll2, *psc; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ); + + pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); + dm365_pll1_init(NULL, pll1, NULL); + + pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_1K); + dm365_pll2_init(NULL, pll2, NULL); + + psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); + dm365_psc_init(NULL, psc); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +void __init dm365_register_clocks(void) +{ + /* all clocks are currently registered in dm365_init_time() */ } static struct resource dm365_vpss_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index a2e8586c8a6d..0720da7809a6 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -8,28 +8,29 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/serial_8250.h> + +#include <linux/clk-provider.h> +#include <linux/clk/davinci.h> +#include <linux/clkdev.h> #include <linux/dmaengine.h> -#include <linux/platform_device.h> +#include <linux/init.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> #include <asm/mach/map.h> +#include <mach/common.h> #include <mach/cputype.h> #include <mach/irqs.h> -#include "psc.h" #include <mach/mux.h> -#include <mach/time.h> #include <mach/serial.h> -#include <mach/common.h> +#include <mach/time.h> +#include "asp.h" #include "davinci.h" -#include "clock.h" #include "mux.h" -#include "asp.h" /* * Device specific clocks @@ -43,290 +44,6 @@ #define DM644X_EMAC_CNTRL_RAM_OFFSET 0x2000 #define DM644X_EMAC_CNTRL_RAM_SIZE 0x2000 -static struct pll_data pll1_data = { - .num = 1, - .phys_base = DAVINCI_PLL1_BASE, -}; - -static struct pll_data pll2_data = { - .num = 2, - .phys_base = DAVINCI_PLL2_BASE, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - .rate = DM644X_REF_FREQ, -}; - -static struct clk pll1_clk = { - .name = "pll1", - .parent = &ref_clk, - .pll_data = &pll1_data, - .flags = CLK_PLL, -}; - -static struct clk pll1_sysclk1 = { - .name = "pll1_sysclk1", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll1_sysclk2 = { - .name = "pll1_sysclk2", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll1_sysclk3 = { - .name = "pll1_sysclk3", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_aux_clk = { - .name = "pll1_aux_clk", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll1_sysclkbp = { - .name = "pll1_sysclkbp", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV -}; - -static struct clk pll2_clk = { - .name = "pll2", - .parent = &ref_clk, - .pll_data = &pll2_data, - .flags = CLK_PLL, -}; - -static struct clk pll2_sysclk1 = { - .name = "pll2_sysclk1", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll2_sysclk2 = { - .name = "pll2_sysclk2", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll2_sysclkbp = { - .name = "pll2_sysclkbp", - .parent = &pll2_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV -}; - -static struct clk dsp_clk = { - .name = "dsp", - .parent = &pll1_sysclk1, - .lpsc = DAVINCI_LPSC_GEM, - .domain = DAVINCI_GPSC_DSPDOMAIN, - .usecount = 1, /* REVISIT how to disable? */ -}; - -static struct clk arm_clk = { - .name = "arm", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_ARM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk vicp_clk = { - .name = "vicp", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_IMCOP, - .domain = DAVINCI_GPSC_DSPDOMAIN, - .usecount = 1, /* REVISIT how to disable? */ -}; - -static struct clk vpss_master_clk = { - .name = "vpss_master", - .parent = &pll1_sysclk3, - .lpsc = DAVINCI_LPSC_VPSSMSTR, - .flags = CLK_PSC, -}; - -static struct clk vpss_slave_clk = { - .name = "vpss_slave", - .parent = &pll1_sysclk3, - .lpsc = DAVINCI_LPSC_VPSSSLV, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART1, -}; - -static struct clk uart2_clk = { - .name = "uart2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART2, -}; - -static struct clk emac_clk = { - .name = "emac", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, -}; - -static struct clk i2c_clk = { - .name = "i2c", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_I2C, -}; - -static struct clk ide_clk = { - .name = "ide", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_ATA, -}; - -static struct clk asp_clk = { - .name = "asp0", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_McBSP, -}; - -static struct clk mmcsd_clk = { - .name = "mmcsd", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_MMC_SD, -}; - -static struct clk spi_clk = { - .name = "spi", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_SPI, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_GPIO, -}; - -static struct clk usb_clk = { - .name = "usb", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_USB, -}; - -static struct clk vlynq_clk = { - .name = "vlynq", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_VLYNQ, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_AEMIF, -}; - -static struct clk pwm0_clk = { - .name = "pwm0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM0, -}; - -static struct clk pwm1_clk = { - .name = "pwm1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM1, -}; - -static struct clk pwm2_clk = { - .name = "pwm2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM2, -}; - -static struct clk timer0_clk = { - .name = "timer0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER0, -}; - -static struct clk timer1_clk = { - .name = "timer1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER1, -}; - -static struct clk timer2_clk = { - .name = "timer2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why can't this be disabled? */ -}; - -static struct clk_lookup dm644x_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "pll1", &pll1_clk), - CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), - CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), - CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), - CLK(NULL, "pll1_aux", &pll1_aux_clk), - CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), - CLK(NULL, "pll2", &pll2_clk), - CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), - CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), - CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), - CLK(NULL, "dsp", &dsp_clk), - CLK(NULL, "arm", &arm_clk), - CLK(NULL, "vicp", &vicp_clk), - CLK("vpss", "master", &vpss_master_clk), - CLK("vpss", "slave", &vpss_slave_clk), - CLK(NULL, "arm", &arm_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("serial8250.2", NULL, &uart2_clk), - CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), - CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("palm_bk3710", NULL, &ide_clk), - CLK("davinci-mcbsp", NULL, &asp_clk), - CLK("dm6441-mmc.0", NULL, &mmcsd_clk), - CLK(NULL, "spi", &spi_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK(NULL, "usb", &usb_clk), - CLK(NULL, "vlynq", &vlynq_clk), - CLK(NULL, "aemif", &aemif_clk), - CLK(NULL, "pwm0", &pwm0_clk), - CLK(NULL, "pwm1", &pwm1_clk), - CLK(NULL, "pwm2", &pwm2_clk), - CLK(NULL, "timer0", &timer0_clk), - CLK(NULL, "timer1", &timer1_clk), - CLK("davinci-wdt", NULL, &timer2_clk), - CLK(NULL, NULL, NULL), -}; - static struct emac_platform_data dm644x_emac_pdata = { .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET, @@ -819,8 +536,6 @@ static struct davinci_id dm644x_ids[] = { }, }; -static u32 dm644x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE }; - /* * T0_BOT: Timer 0, bottom: clockevent source for hrtimers * T0_TOP: Timer 0, top : clocksource for generic timekeeping @@ -905,8 +620,6 @@ static const struct davinci_soc_info davinci_soc_info_dm644x = { .jtag_id_reg = 0x01c40028, .ids = dm644x_ids, .ids_num = ARRAY_SIZE(dm644x_ids), - .psc_bases = dm644x_psc_bases, - .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases), .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm644x_pins, .pinmux_pins_num = ARRAY_SIZE(dm644x_pins), @@ -934,8 +647,41 @@ void __init dm644x_init(void) void __init dm644x_init_time(void) { - davinci_clk_init(dm644x_clks); - davinci_timer_init(); + void __iomem *pll1, *psc; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM644X_REF_FREQ); + + pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); + dm644x_pll1_init(NULL, pll1, NULL); + + psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); + dm644x_psc_init(NULL, psc); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +static struct resource dm644x_pll2_resources[] = { + { + .start = DAVINCI_PLL2_BASE, + .end = DAVINCI_PLL2_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm644x_pll2_device = { + .name = "dm644x-pll2", + .id = -1, + .resource = dm644x_pll2_resources, + .num_resources = ARRAY_SIZE(dm644x_pll2_resources), +}; + +void __init dm644x_register_clocks(void) +{ + /* PLL1 and PSC are registered in dm644x_init_time() */ + platform_device_register(&dm644x_pll2_device); } int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index c32ca27ab343..6bd2ed069d0d 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -8,29 +8,30 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ + +#include <linux/clk-provider.h> +#include <linux/clk/davinci.h> +#include <linux/clkdev.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/init.h> -#include <linux/clk.h> -#include <linux/serial_8250.h> -#include <linux/platform_device.h> #include <linux/platform_data/edma.h> #include <linux/platform_data/gpio-davinci.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> #include <asm/mach/map.h> +#include <mach/common.h> #include <mach/cputype.h> #include <mach/irqs.h> -#include "psc.h" #include <mach/mux.h> -#include <mach/time.h> #include <mach/serial.h> -#include <mach/common.h> +#include <mach/time.h> +#include "asp.h" #include "davinci.h" -#include "clock.h" #include "mux.h" -#include "asp.h" #define DAVINCI_VPIF_BASE (0x01C12000) @@ -46,317 +47,6 @@ #define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000 #define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000 -static struct pll_data pll1_data = { - .num = 1, - .phys_base = DAVINCI_PLL1_BASE, -}; - -static struct pll_data pll2_data = { - .num = 2, - .phys_base = DAVINCI_PLL2_BASE, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - /* rate is initialized in dm646x_init_time() */ -}; - -static struct clk aux_clkin = { - .name = "aux_clkin", - /* rate is initialized in dm646x_init_time() */ -}; - -static struct clk pll1_clk = { - .name = "pll1", - .parent = &ref_clk, - .pll_data = &pll1_data, - .flags = CLK_PLL, -}; - -static struct clk pll1_sysclk1 = { - .name = "pll1_sysclk1", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll1_sysclk2 = { - .name = "pll1_sysclk2", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll1_sysclk3 = { - .name = "pll1_sysclk3", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_sysclk6 = { - .name = "pll1_sysclk6", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll1_sysclk8 = { - .name = "pll1_sysclk8", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV8, -}; - -static struct clk pll1_sysclk9 = { - .name = "pll1_sysclk9", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV9, -}; - -static struct clk pll1_sysclkbp = { - .name = "pll1_sysclkbp", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV, -}; - -static struct clk pll1_aux_clk = { - .name = "pll1_aux_clk", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll2_clk = { - .name = "pll2_clk", - .parent = &ref_clk, - .pll_data = &pll2_data, - .flags = CLK_PLL, -}; - -static struct clk pll2_sysclk1 = { - .name = "pll2_sysclk1", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk dsp_clk = { - .name = "dsp", - .parent = &pll1_sysclk1, - .lpsc = DM646X_LPSC_C64X_CPU, - .usecount = 1, /* REVISIT how to disable? */ -}; - -static struct clk arm_clk = { - .name = "arm", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_ARM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk edma_cc_clk = { - .name = "edma_cc", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_TPCC, - .flags = ALWAYS_ENABLED, -}; - -static struct clk edma_tc0_clk = { - .name = "edma_tc0", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_TPTC0, - .flags = ALWAYS_ENABLED, -}; - -static struct clk edma_tc1_clk = { - .name = "edma_tc1", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_TPTC1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk edma_tc2_clk = { - .name = "edma_tc2", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_TPTC2, - .flags = ALWAYS_ENABLED, -}; - -static struct clk edma_tc3_clk = { - .name = "edma_tc3", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_TPTC3, - .flags = ALWAYS_ENABLED, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &aux_clkin, - .lpsc = DM646X_LPSC_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &aux_clkin, - .lpsc = DM646X_LPSC_UART1, -}; - -static struct clk uart2_clk = { - .name = "uart2", - .parent = &aux_clkin, - .lpsc = DM646X_LPSC_UART2, -}; - -static struct clk i2c_clk = { - .name = "I2CCLK", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_I2C, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_GPIO, -}; - -static struct clk mcasp0_clk = { - .name = "mcasp0", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_McASP0, -}; - -static struct clk mcasp1_clk = { - .name = "mcasp1", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_McASP1, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_AEMIF, - .flags = ALWAYS_ENABLED, -}; - -static struct clk emac_clk = { - .name = "emac", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_EMAC, -}; - -static struct clk pwm0_clk = { - .name = "pwm0", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_PWM0, - .usecount = 1, /* REVIST: disabling hangs system */ -}; - -static struct clk pwm1_clk = { - .name = "pwm1", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_PWM1, - .usecount = 1, /* REVIST: disabling hangs system */ -}; - -static struct clk timer0_clk = { - .name = "timer0", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_TIMER0, -}; - -static struct clk timer1_clk = { - .name = "timer1", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_TIMER1, -}; - -static struct clk timer2_clk = { - .name = "timer2", - .parent = &pll1_sysclk3, - .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */ -}; - - -static struct clk ide_clk = { - .name = "ide", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_ATA, -}; - -static struct clk vpif0_clk = { - .name = "vpif0", - .parent = &ref_clk, - .lpsc = DM646X_LPSC_VPSSMSTR, - .flags = ALWAYS_ENABLED, -}; - -static struct clk vpif1_clk = { - .name = "vpif1", - .parent = &ref_clk, - .lpsc = DM646X_LPSC_VPSSSLV, - .flags = ALWAYS_ENABLED, -}; - -static struct clk_lookup dm646x_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "aux", &aux_clkin), - CLK(NULL, "pll1", &pll1_clk), - CLK(NULL, "pll1_sysclk", &pll1_sysclk1), - CLK(NULL, "pll1_sysclk", &pll1_sysclk2), - CLK(NULL, "pll1_sysclk", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk", &pll1_sysclk4), - CLK(NULL, "pll1_sysclk", &pll1_sysclk5), - CLK(NULL, "pll1_sysclk", &pll1_sysclk6), - CLK(NULL, "pll1_sysclk", &pll1_sysclk8), - CLK(NULL, "pll1_sysclk", &pll1_sysclk9), - CLK(NULL, "pll1_sysclk", &pll1_sysclkbp), - CLK(NULL, "pll1_aux", &pll1_aux_clk), - CLK(NULL, "pll2", &pll2_clk), - CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), - CLK(NULL, "dsp", &dsp_clk), - CLK(NULL, "arm", &arm_clk), - CLK(NULL, "edma_cc", &edma_cc_clk), - CLK(NULL, "edma_tc0", &edma_tc0_clk), - CLK(NULL, "edma_tc1", &edma_tc1_clk), - CLK(NULL, "edma_tc2", &edma_tc2_clk), - CLK(NULL, "edma_tc3", &edma_tc3_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("serial8250.2", NULL, &uart2_clk), - CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK("davinci-mcasp.0", NULL, &mcasp0_clk), - CLK("davinci-mcasp.1", NULL, &mcasp1_clk), - CLK(NULL, "aemif", &aemif_clk), - CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), - CLK(NULL, "pwm0", &pwm0_clk), - CLK(NULL, "pwm1", &pwm1_clk), - CLK(NULL, "timer0", &timer0_clk), - CLK(NULL, "timer1", &timer1_clk), - CLK("davinci-wdt", NULL, &timer2_clk), - CLK("palm_bk3710", NULL, &ide_clk), - CLK(NULL, "vpif0", &vpif0_clk), - CLK(NULL, "vpif1", &vpif1_clk), - CLK(NULL, NULL, NULL), -}; - static struct emac_platform_data dm646x_emac_pdata = { .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET, @@ -796,8 +486,6 @@ static struct davinci_id dm646x_ids[] = { }, }; -static u32 dm646x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE }; - /* * T0_BOT: Timer 0, bottom: clockevent source for hrtimers * T0_TOP: Timer 0, top : clocksource for generic timekeeping @@ -882,8 +570,6 @@ static const struct davinci_soc_info davinci_soc_info_dm646x = { .jtag_id_reg = 0x01c40028, .ids = dm646x_ids, .ids_num = ARRAY_SIZE(dm646x_ids), - .psc_bases = dm646x_psc_bases, - .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases), .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm646x_pins, .pinmux_pins_num = ARRAY_SIZE(dm646x_pins), @@ -954,10 +640,42 @@ void __init dm646x_init(void) void __init dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate) { - ref_clk.rate = ref_clk_rate; - aux_clkin.rate = aux_clkin_rate; - davinci_clk_init(dm646x_clks); - davinci_timer_init(); + void __iomem *pll1, *psc; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate); + clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate); + + pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); + dm646x_pll1_init(NULL, pll1, NULL); + + psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); + dm646x_psc_init(NULL, psc); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +static struct resource dm646x_pll2_resources[] = { + { + .start = DAVINCI_PLL2_BASE, + .end = DAVINCI_PLL2_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm646x_pll2_device = { + .name = "dm646x-pll2", + .id = -1, + .resource = dm646x_pll2_resources, + .num_resources = ARRAY_SIZE(dm646x_pll2_resources), +}; + +void __init dm646x_register_clocks(void) +{ + /* PLL1 and PSC are registered in dm646x_init_time() */ + platform_device_register(&dm646x_pll2_device); } static int __init dm646x_init_devices(void) diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h index 3e8af6a0b64c..42ed4f2f5ce4 100644 --- a/arch/arm/mach-davinci/include/mach/clock.h +++ b/arch/arm/mach-davinci/include/mach/clock.h @@ -15,9 +15,6 @@ struct clk; -extern int clk_register(struct clk *clk); -extern void clk_unregister(struct clk *clk); - int davinci_clk_reset_assert(struct clk *c); int davinci_clk_reset_deassert(struct clk *c); diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index f0d5e858f158..b577e13a9c23 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -12,11 +12,12 @@ #ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H #define __ARCH_ARM_MACH_DAVINCI_COMMON_H +#include <linux/clk.h> #include <linux/compiler.h> #include <linux/types.h> #include <linux/reboot.h> -extern void davinci_timer_init(void); +void davinci_timer_init(struct clk *clk); extern void davinci_irq_init(void); extern void __iomem *davinci_intc_base; @@ -53,8 +54,6 @@ struct davinci_soc_info { u32 jtag_id_reg; struct davinci_id *ids; unsigned long ids_num; - u32 *psc_bases; - unsigned long psc_bases_num; u32 pinmux_base; const struct mux_config *pinmux_pins; unsigned long pinmux_pins_num; @@ -82,12 +81,6 @@ extern void davinci_common_init(const struct davinci_soc_info *soc_info); extern void davinci_init_ide(void); void davinci_init_late(void); -#ifdef CONFIG_DAVINCI_RESET_CLOCKS -int davinci_clk_disable_unused(void); -#else -static inline int davinci_clk_disable_unused(void) { return 0; } -#endif - #ifdef CONFIG_CPU_FREQ int davinci_cpufreq_init(void); #else diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 9fd6d0125762..ab4a57f433f4 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -89,9 +89,11 @@ extern unsigned int da850_max_speed; void da830_init(void); void da830_init_time(void); +void da830_register_clocks(void); void da850_init(void); void da850_init_time(void); +void da850_register_clocks(void); int da830_register_edma(struct edma_rsv_info *rsv); int da850_register_edma(struct edma_rsv_info *rsv[2]); @@ -101,9 +103,7 @@ int da8xx_register_watchdog(void); int da8xx_register_usb_phy(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); -int da8xx_register_usb_refclkin(int rate); -int da8xx_register_usb20_phy_clk(bool use_usb_refclkin); -int da8xx_register_usb11_phy_clk(bool use_usb_refclkin); +int da8xx_register_usb_phy_clocks(void); int da850_register_sata_refclk(int rate); int da8xx_register_emac(void); int da8xx_register_uio_pruss(void); diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c index 78eac2c0c146..e251fd593bfd 100644 --- a/arch/arm/mach-davinci/pm_domain.c +++ b/arch/arm/mach-davinci/pm_domain.c @@ -13,6 +13,7 @@ #include <linux/pm_runtime.h> #include <linux/pm_clock.h> #include <linux/platform_device.h> +#include <linux/of.h> static struct dev_pm_domain davinci_pm_domain = { .ops = { @@ -28,6 +29,10 @@ static struct pm_clk_notifier_block platform_bus_notifier = { static int __init davinci_pm_runtime_init(void) { + if (of_have_populated_dt()) + return 0; + + /* Use pm_clk as fallback if we're not using genpd. */ pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); return 0; diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c deleted file mode 100644 index e5dc6bfde5f3..000000000000 --- a/arch/arm/mach-davinci/psc.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * TI DaVinci Power and Sleep Controller (PSC) - * - * Copyright (C) 2006 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <mach/cputype.h> -#include "psc.h" - -#include "clock.h" - -/* Return nonzero iff the domain's clock is active */ -int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) -{ - void __iomem *psc_base; - u32 mdstat; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { - pr_warn("PSC: Bad psc data: 0x%x[%d]\n", - (int)soc_info->psc_bases, ctlr); - return 0; - } - - psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K); - mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); - iounmap(psc_base); - - /* if clocked, state can be "Enable" or "SyncReset" */ - return mdstat & BIT(12); -} - -/* Control "reset" line associated with PSC domain */ -void davinci_psc_reset(unsigned int ctlr, unsigned int id, bool reset) -{ - u32 mdctl; - void __iomem *psc_base; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { - pr_warn("PSC: Bad psc data: 0x%x[%d]\n", - (int)soc_info->psc_bases, ctlr); - return; - } - - psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K); - - mdctl = readl(psc_base + MDCTL + 4 * id); - if (reset) - mdctl &= ~MDCTL_LRST; - else - mdctl |= MDCTL_LRST; - writel(mdctl, psc_base + MDCTL + 4 * id); - - iounmap(psc_base); -} - -/* Enable or disable a PSC domain */ -void davinci_psc_config(unsigned int domain, unsigned int ctlr, - unsigned int id, bool enable, u32 flags) -{ - u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl; - void __iomem *psc_base; - struct davinci_soc_info *soc_info = &davinci_soc_info; - u32 next_state = PSC_STATE_ENABLE; - - if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { - pr_warn("PSC: Bad psc data: 0x%x[%d]\n", - (int)soc_info->psc_bases, ctlr); - return; - } - - psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K); - - if (!enable) { - if (flags & PSC_SWRSTDISABLE) - next_state = PSC_STATE_SWRSTDISABLE; - else - next_state = PSC_STATE_DISABLE; - } - - mdctl = __raw_readl(psc_base + MDCTL + 4 * id); - mdctl &= ~MDSTAT_STATE_MASK; - mdctl |= next_state; - if (flags & PSC_FORCE) - mdctl |= MDCTL_FORCE; - __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - - pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain); - if ((pdstat & PDSTAT_STATE_MASK) == 0) { - pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); - pdctl |= PDCTL_NEXT; - __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); - - ptcmd = 1 << domain; - __raw_writel(ptcmd, psc_base + PTCMD); - - do { - epcpr = __raw_readl(psc_base + EPCPR); - } while ((((epcpr >> domain) & 1) == 0)); - - pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); - pdctl |= PDCTL_EPCGOOD; - __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); - } else { - ptcmd = 1 << domain; - __raw_writel(ptcmd, psc_base + PTCMD); - } - - do { - ptstat = __raw_readl(psc_base + PTSTAT); - } while (!(((ptstat >> domain) & 1) == 0)); - - do { - mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); - } while (!((mdstat & MDSTAT_STATE_MASK) == next_state)); - - iounmap(psc_base); -} diff --git a/arch/arm/mach-davinci/psc.h b/arch/arm/mach-davinci/psc.h index 8af9f09fc10c..68cd9d3fc82b 100644 --- a/arch/arm/mach-davinci/psc.h +++ b/arch/arm/mach-davinci/psc.h @@ -27,8 +27,6 @@ #ifndef __ASM_ARCH_PSC_H #define __ASM_ARCH_PSC_H -#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 - /* Power and Sleep Controller (PSC) Domains */ #define DAVINCI_GPSC_ARMDOMAIN 0 #define DAVINCI_GPSC_DSPDOMAIN 1 @@ -206,14 +204,4 @@ #define PDCTL_NEXT BIT(0) #define PDCTL_EPCGOOD BIT(8) -#ifndef __ASSEMBLER__ - -extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); -extern void davinci_psc_reset(unsigned int ctlr, unsigned int id, - bool reset); -extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, - unsigned int id, bool enable, u32 flags); - -#endif - #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 1bb991ad9c1e..5a6de5368ab0 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/sched_clock.h> @@ -27,8 +28,6 @@ #include <mach/hardware.h> #include <mach/time.h> -#include "clock.h" - static struct clock_event_device clockevent_davinci; static unsigned int davinci_clock_tick_rate; @@ -334,10 +333,8 @@ static struct clock_event_device clockevent_davinci = { .set_state_oneshot = davinci_set_oneshot, }; - -void __init davinci_timer_init(void) +void __init davinci_timer_init(struct clk *timer_clk) { - struct clk *timer_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; unsigned int clockevent_id; unsigned int clocksource_id; @@ -373,7 +370,6 @@ void __init davinci_timer_init(void) } } - timer_clk = clk_get(NULL, "timer0"); BUG_ON(IS_ERR(timer_clk)); clk_prepare_enable(timer_clk); @@ -402,3 +398,17 @@ void __init davinci_timer_init(void) for (i=0; i< ARRAY_SIZE(timers); i++) timer32_config(&timers[i]); } + +static int __init of_davinci_timer_init(struct device_node *np) +{ + struct clk *clk; + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + davinci_timer_init(clk); + + return 0; +} +TIMER_OF_DECLARE(davinci_timer, "ti,da830-timer", of_davinci_timer_init); diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index 50445f0e98de..c17ce66a3d95 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -2,29 +2,30 @@ /* * DA8xx USB */ -#include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/mfd/da8xx-cfgchip.h> +#include <linux/mfd/syscon.h> #include <linux/phy/phy.h> +#include <linux/platform_data/clk-da8xx-cfgchip.h> #include <linux/platform_data/phy-da8xx-usb.h> #include <linux/platform_data/usb-davinci.h> #include <linux/platform_device.h> #include <linux/usb/musb.h> -#include <mach/clock.h> #include <mach/common.h> #include <mach/cputype.h> #include <mach/da8xx.h> #include <mach/irqs.h> -#include "clock.h" - #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 +#ifndef CONFIG_COMMON_CLK static struct clk *usb20_clk; +#endif static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata; @@ -81,11 +82,6 @@ static struct platform_device da8xx_usb20_dev = { .name = "musb-da8xx", .id = -1, .dev = { - /* - * Setting init_name so that clock lookup will work in - * usb20_phy_clk_enable() even if this device is not registered. - */ - .init_name = "musb-da8xx", .platform_data = &usb_data, .dma_mask = &usb_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), @@ -134,229 +130,17 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata) return platform_device_register(&da8xx_usb11_device); } -static struct clk usb_refclkin = { - .name = "usb_refclkin", - .set_rate = davinci_simple_set_rate, -}; - -static struct clk_lookup usb_refclkin_lookup = - CLK(NULL, "usb_refclkin", &usb_refclkin); - -/** - * da8xx_register_usb_refclkin - register USB_REFCLKIN clock - * - * @rate: The clock rate in Hz - * - * This clock is only needed if the board provides an external USB_REFCLKIN - * signal, in which case it will be used as the parent of usb20_phy_clk and/or - * usb11_phy_clk. - */ -int __init da8xx_register_usb_refclkin(int rate) -{ - int ret; - - usb_refclkin.rate = rate; - ret = clk_register(&usb_refclkin); - if (ret) - return ret; - - clkdev_add(&usb_refclkin_lookup); - - return 0; -} - -static void usb20_phy_clk_enable(struct clk *clk) -{ - u32 val; - u32 timeout = 500000; /* 500 msec */ - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */ - davinci_clk_enable(usb20_clk); - - /* - * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1 - * host may use the PLL clock without USB 2.0 OTG being used. - */ - val &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN); - val |= CFGCHIP2_PHY_PLLON; - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - while (--timeout) { - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - if (val & CFGCHIP2_PHYCLKGD) - goto done; - udelay(1); - } - - pr_err("Timeout waiting for USB 2.0 PHY clock good\n"); -done: - davinci_clk_disable(usb20_clk); -} - -static void usb20_phy_clk_disable(struct clk *clk) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - val |= CFGCHIP2_PHYPWRDN; - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); -} - -static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* Set the mux depending on the parent clock. */ - if (parent == &usb_refclkin) { - val &= ~CFGCHIP2_USB2PHYCLKMUX; - } else if (strcmp(parent->name, "pll0_aux_clk") == 0) { - val |= CFGCHIP2_USB2PHYCLKMUX; - } else { - pr_err("Bad parent on USB 2.0 PHY clock\n"); - return -EINVAL; - } - - /* reference frequency also comes from parent clock */ - val &= ~CFGCHIP2_REFFREQ_MASK; - switch (clk_get_rate(parent)) { - case 12000000: - val |= CFGCHIP2_REFFREQ_12MHZ; - break; - case 13000000: - val |= CFGCHIP2_REFFREQ_13MHZ; - break; - case 19200000: - val |= CFGCHIP2_REFFREQ_19_2MHZ; - break; - case 20000000: - val |= CFGCHIP2_REFFREQ_20MHZ; - break; - case 24000000: - val |= CFGCHIP2_REFFREQ_24MHZ; - break; - case 26000000: - val |= CFGCHIP2_REFFREQ_26MHZ; - break; - case 38400000: - val |= CFGCHIP2_REFFREQ_38_4MHZ; - break; - case 40000000: - val |= CFGCHIP2_REFFREQ_40MHZ; - break; - case 48000000: - val |= CFGCHIP2_REFFREQ_48MHZ; - break; - default: - pr_err("Bad parent clock rate on USB 2.0 PHY clock\n"); - return -EINVAL; - } - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - return 0; -} - -static struct clk usb20_phy_clk = { - .name = "usb0_clk48", - .clk_enable = usb20_phy_clk_enable, - .clk_disable = usb20_phy_clk_disable, - .set_parent = usb20_phy_clk_set_parent, -}; - -static struct clk_lookup usb20_phy_clk_lookup = - CLK("da8xx-usb-phy", "usb0_clk48", &usb20_phy_clk); - -/** - * da8xx_register_usb20_phy_clk - register USB0PHYCLKMUX clock - * - * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true - * or "pll0_aux" if false. - */ -int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin) -{ - struct clk *parent; - int ret; - - usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20"); - ret = PTR_ERR_OR_ZERO(usb20_clk); - if (ret) - return ret; - - parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux"); - ret = PTR_ERR_OR_ZERO(parent); - if (ret) { - clk_put(usb20_clk); - return ret; - } - - usb20_phy_clk.parent = parent; - ret = clk_register(&usb20_phy_clk); - if (!ret) - clkdev_add(&usb20_phy_clk_lookup); - - clk_put(parent); - - return ret; -} - -static int usb11_phy_clk_set_parent(struct clk *clk, struct clk *parent) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* Set the USB 1.1 PHY clock mux based on the parent clock. */ - if (parent == &usb20_phy_clk) { - val &= ~CFGCHIP2_USB1PHYCLKMUX; - } else if (parent == &usb_refclkin) { - val |= CFGCHIP2_USB1PHYCLKMUX; - } else { - pr_err("Bad parent on USB 1.1 PHY clock\n"); - return -EINVAL; - } - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - return 0; -} - -static struct clk usb11_phy_clk = { - .name = "usb1_clk48", - .set_parent = usb11_phy_clk_set_parent, +static struct platform_device da8xx_usb_phy_clks_device = { + .name = "da830-usb-phy-clks", + .id = -1, }; -static struct clk_lookup usb11_phy_clk_lookup = - CLK("da8xx-usb-phy", "usb1_clk48", &usb11_phy_clk); - -/** - * da8xx_register_usb11_phy_clk - register USB1PHYCLKMUX clock - * - * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true - * or "usb0_clk48" if false. - */ -int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin) +int __init da8xx_register_usb_phy_clocks(void) { - struct clk *parent; - int ret = 0; - - if (use_usb_refclkin) - parent = clk_get(NULL, "usb_refclkin"); - else - parent = clk_get(&da8xx_usb_phy.dev, "usb0_clk48"); - if (IS_ERR(parent)) - return PTR_ERR(parent); - - usb11_phy_clk.parent = parent; - ret = clk_register(&usb11_phy_clk); - if (!ret) - clkdev_add(&usb11_phy_clk_lookup); + struct da8xx_cfgchip_clk_platform_data pdata; - clk_put(parent); + pdata.cfgchip = da8xx_get_cfgchip(); + da8xx_usb_phy_clks_device.dev.platform_data = &pdata; - return ret; + return platform_device_register(&da8xx_usb_phy_clks_device); } diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f4b6c93a7fd0..865dcc4c3181 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -190,8 +190,6 @@ static void __init exynos_dt_fixup(void) } DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") - /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .l2c_aux_val = 0x3c400001, .l2c_aux_mask = 0xc20fffff, .smp = smp_ops(exynos_smp_ops), diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index f3384e3a675d..7ead3acd6fa4 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -203,6 +203,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node, NULL); if (!domain) { iounmap(pmu_base_addr); + pmu_base_addr = NULL; return -ENOMEM; } diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index a129aae72602..909bb2493781 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -148,13 +148,20 @@ static int hi3xxx_hotplug_init(void) struct device_node *node; node = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); - if (node) { - ctrl_base = of_iomap(node, 0); - id = HI3620_CTRL; - return 0; + if (!node) { + id = ERROR_CTRL; + return -ENOENT; } - id = ERROR_CTRL; - return -ENOENT; + + ctrl_base = of_iomap(node, 0); + of_node_put(node); + if (!ctrl_base) { + id = ERROR_CTRL; + return -ENOMEM; + } + + id = HI3620_CTRL; + return 0; } void hi3xxx_set_cpu(int cpu, bool enable) @@ -173,11 +180,15 @@ static bool hix5hd2_hotplug_init(void) struct device_node *np; np = of_find_compatible_node(NULL, NULL, "hisilicon,cpuctrl"); - if (np) { - ctrl_base = of_iomap(np, 0); - return true; - } - return false; + if (!np) + return false; + + ctrl_base = of_iomap(np, 0); + of_node_put(np); + if (!ctrl_base) + return false; + + return true; } void hix5hd2_set_cpu(int cpu, bool enable) @@ -219,10 +230,10 @@ void hip01_set_cpu(int cpu, bool enable) if (!ctrl_base) { np = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl"); - if (np) - ctrl_base = of_iomap(np, 0); - else - BUG(); + BUG_ON(!np); + ctrl_base = of_iomap(np, 0); + of_node_put(np); + BUG_ON(!ctrl_base); } if (enable) { diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 6f4232384774..abc337111eff 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -523,18 +523,6 @@ config SOC_IMX6UL help This enables support for Freescale i.MX6 UltraLite processor. -config SOC_IMX7D - bool "i.MX7 Dual support" - select PINCTRL_IMX7D - select ARM_GIC - select HAVE_ARM_ARCH_TIMER - select HAVE_IMX_ANATOP - select HAVE_IMX_MMDC - select HAVE_IMX_SRC - select IMX_GPCV2 - help - This enables support for Freescale i.MX7 Dual processor. - config SOC_LS1021A bool "Freescale LS1021A support" select ARM_GIC @@ -549,6 +537,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M +config SOC_IMX7D_CA7 + bool + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select HAVE_IMX_ANATOP + select HAVE_IMX_MMDC + select HAVE_IMX_SRC + select IMX_GPCV2 + +config SOC_IMX7D_CM4 + bool + select ARMV7M_SYSTICK + +config SOC_IMX7D + bool "i.MX7 Dual support" + select PINCTRL_IMX7D + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M + help + This enables support for Freescale i.MX7 Dual processor. + config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC if ARCH_MULTI_V7 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 2327e3e876d8..bae179af21f6 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -26,7 +26,7 @@ ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o -obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sx.o obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o endif @@ -81,7 +81,8 @@ obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SLL) += mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o -obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o ifeq ($(CONFIG_SUSPEND),y) AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index c8d68e918b2f..423dd76bb6b8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -38,7 +38,6 @@ void imx21_soc_init(void); void imx27_soc_init(void); void imx31_soc_init(void); void imx35_soc_init(void); -void epit_timer_init(void __iomem *base, int irq); int mx21_clocks_init(unsigned long lref, unsigned long fref); int mx27_clocks_init(unsigned long fref); int mx31_clocks_init(unsigned long fref); @@ -58,10 +57,12 @@ struct device *imx_soc_device_init(void); void imx6_enable_rbc(bool enable); void imx_gpc_check_dt(void); void imx_gpc_set_arm_power_in_lpm(bool power_off); +void imx_gpc_set_l2_mem_power_in_lpm(bool power_off); void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); void imx25_pm_init(void); void imx27_pm_init(void); +void imx5_pmu_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index 4f2d1c772f85..e210bac18840 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -117,3 +117,48 @@ int mx53_revision(void) return mx5_cpu_rev; } EXPORT_SYMBOL(mx53_revision); + +#define ARM_GPC 0x4 +#define DBGEN BIT(16) + +/* + * This enables the DBGEN bit in ARM_GPC register, which is + * required for accessing some performance counter features. + * Technically it is only required while perf is used, but to + * keep the source code simple we just enable it all the time + * when the kernel configuration allows using the feature. + */ +void __init imx5_pmu_init(void) +{ + void __iomem *tigerp_base; + struct device_node *np; + u32 gpc; + + if (!IS_ENABLED(CONFIG_ARM_PMU)) + return; + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a8-pmu"); + if (!np) + return; + + if (!of_property_read_bool(np, "secure-reg-access")) + goto exit; + + of_node_put(np); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-tigerp"); + if (!np) + return; + + tigerp_base = of_iomap(np, 0); + if (!tigerp_base) + goto exit; + + gpc = readl_relaxed(tigerp_base + ARM_GPC); + gpc |= DBGEN; + writel_relaxed(gpc, tigerp_base + ARM_GPC); + iounmap(tigerp_base); +exit: + of_node_put(np); + +} diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 32969f34486a..c6b1bf97a6c1 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -68,6 +68,7 @@ void __init imx_aips_allow_unprivileged_access( for_each_compatible_node(np, NULL, compat) { aips_base_addr = of_iomap(np, 0); + WARN_ON(!aips_base_addr); imx_set_aips(aips_base_addr); } } diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index fa8ead145d17..8d866fb674a8 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -12,7 +12,6 @@ #include "common.h" #include "cpuidle.h" -#include "hardware.h" static int imx6sl_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -22,11 +21,9 @@ static int imx6sl_enter_wait(struct cpuidle_device *dev, * Software workaround for ERR005311, see function * description for details. */ - if (cpu_is_imx6sl()) - imx6sl_set_wait_clk(true); + imx6sl_set_wait_clk(true); cpu_do_idle(); - if (cpu_is_imx6sl()) - imx6sl_set_wait_clk(false); + imx6sl_set_wait_clk(false); imx6_set_lpm(WAIT_CLOCKED); return index; diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index d0f14b761ff7..243a108a940b 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -103,6 +103,7 @@ int __init imx6sx_cpuidle_init(void) { imx6_set_int_mem_clk_lpm(true); imx6_enable_rbc(false); + imx_gpc_set_l2_mem_power_in_lpm(false); /* * set ARM power up/down timing to the fastest, * sw2iso and sw can be set to one 32K cycle = 31us diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index de535cb679b3..e11159d40fb8 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -20,6 +20,7 @@ #include "common.h" #include "hardware.h" +#define GPC_CNTR 0x0 #define GPC_IMR1 0x008 #define GPC_PGC_CPU_PDN 0x2a0 #define GPC_PGC_CPU_PUPSCR 0x2a4 @@ -27,6 +28,8 @@ #define GPC_PGC_SW2ISO_SHIFT 0x8 #define GPC_PGC_SW_SHIFT 0x0 +#define GPC_CNTR_L2_PGE_SHIFT 22 + #define IMR_NUM 4 #define GPC_MAX_IRQS (IMR_NUM * 32) @@ -51,6 +54,17 @@ void imx_gpc_set_arm_power_in_lpm(bool power_off) writel_relaxed(power_off, gpc_base + GPC_PGC_CPU_PDN); } +void imx_gpc_set_l2_mem_power_in_lpm(bool power_off) +{ + u32 val; + + val = readl_relaxed(gpc_base + GPC_CNTR); + val &= ~(1 << GPC_CNTR_L2_PGE_SHIFT); + if (power_off) + val |= 1 << GPC_CNTR_L2_PGE_SHIFT; + writel_relaxed(val, gpc_base + GPC_CNTR); +} + void imx_gpc_pre_suspend(bool arm_power_off) { void __iomem *reg_imr1 = gpc_base + GPC_IMR1; diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index 668d74b72511..9d9640aaf858 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -9,35 +9,17 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/irq.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> - #include "common.h" -#include "mx31.h" static const char * const imx31_dt_board_compat[] __initconst = { "fsl,imx31", NULL }; -/* FIXME: replace with DT binding */ -static const struct resource imx31_rnga_res[] __initconst = { - DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K), -}; - -static void __init imx31_dt_mach_init(void) -{ - platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res, - ARRAY_SIZE(imx31_rnga_res)); -} - DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .init_machine = imx31_dt_mach_init, .dt_compat = imx31_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index 3835b6a3423c..c7169c2f94c4 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -12,6 +12,7 @@ #include <linux/io.h> #include <linux/irq.h> +#include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> @@ -48,11 +49,38 @@ static void __init imx51_ipu_mipi_setup(void) iounmap(hsc_addr); } +static void __init imx51_m4if_setup(void) +{ + void __iomem *m4if_base; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-m4if"); + if (!np) + return; + + m4if_base = of_iomap(np, 0); + if (!m4if_base) { + pr_err("Unable to map M4IF registers\n"); + return; + } + + /* + * Configure VPU and IPU with higher priorities + * in order to avoid artifacts during video playback + */ + writel_relaxed(0x00000203, m4if_base + 0x40); + writel_relaxed(0x00000000, m4if_base + 0x44); + writel_relaxed(0x00120125, m4if_base + 0x9c); + writel_relaxed(0x001901A3, m4if_base + 0x48); + iounmap(m4if_base); +} + static void __init imx51_dt_init(void) { imx51_ipu_mipi_setup(); imx_src_init(); - + imx51_m4if_setup(); + imx5_pmu_init(); imx_aips_allow_unprivileged_access("fsl,imx51-aipstz"); } diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 07c2e8dca494..5ec7100737e8 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -31,7 +31,7 @@ static void __init imx53_init_early(void) static void __init imx53_dt_init(void) { imx_src_init(); - + imx5_pmu_init(); imx_aips_allow_unprivileged_access("fsl,imx53-aipstz"); } diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index c7a1ef180dda..99be4225297a 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -42,7 +42,10 @@ static void __init imx6sl_init_late(void) if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); - imx6sl_cpuidle_init(); + if (IS_ENABLED(CONFIG_SOC_IMX6SL) && cpu_is_imx6sl()) + imx6sl_cpuidle_init(); + else if (IS_ENABLED(CONFIG_SOC_IMX6SLL)) + imx6sx_cpuidle_init(); } static void __init imx6sl_init_machine(void) diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c new file mode 100644 index 000000000000..0800b5891d2a --- /dev/null +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 Pengutronix, Oleksij Rempel <o.rempel@pengutronix.de> + */ + +#include <linux/kernel.h> +#include <asm/v7m.h> +#include <asm/mach/arch.h> + +static const char * const imx7d_cm4_dt_compat[] __initconst = { + "fsl,imx7d-cm4", + NULL, +}; + +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") + .dt_compat = imx7d_cm4_dt_compat, + .restart = armv7m_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 017539dd712b..b08e407d8d96 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -130,6 +130,13 @@ static const u32 imx6sl_mmdc_io_offset[] __initconst = { 0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */ }; +static const u32 imx6sll_mmdc_io_offset[] __initconst = { + 0x294, 0x298, 0x29c, 0x2a0, /* DQM0 ~ DQM3 */ + 0x544, 0x54c, 0x554, 0x558, /* GPR_B0DS ~ GPR_B3DS */ + 0x530, 0x540, 0x2ac, 0x52c, /* MODE_CTL, MODE, SDCLK_0, GPR_ADDDS */ + 0x2a4, 0x2a8, /* SDCKE0, SDCKE1*/ +}; + static const u32 imx6sx_mmdc_io_offset[] __initconst = { 0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */ 0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */ @@ -175,6 +182,16 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { .mmdc_io_offset = imx6sl_mmdc_io_offset, }; +static const struct imx6_pm_socdata imx6sll_pm_data __initconst = { + .mmdc_compat = "fsl,imx6sll-mmdc", + .src_compat = "fsl,imx6sll-src", + .iomuxc_compat = "fsl,imx6sll-iomuxc", + .gpc_compat = "fsl,imx6sll-gpc", + .pl310_compat = "arm,pl310-cache", + .mmdc_io_num = ARRAY_SIZE(imx6sll_mmdc_io_offset), + .mmdc_io_offset = imx6sll_mmdc_io_offset, +}; + static const struct imx6_pm_socdata imx6sx_pm_data __initconst = { .mmdc_compat = "fsl,imx6sx-mmdc", .src_compat = "fsl,imx6sx-src", @@ -296,7 +313,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) if (cpu_is_imx6sl()) val |= BM_CLPCR_BYPASS_PMIC_READY; if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || - cpu_is_imx6ull()) + cpu_is_imx6ull() || cpu_is_imx6sll()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -314,7 +331,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) if (cpu_is_imx6sl() || cpu_is_imx6sx()) val |= BM_CLPCR_BYPASS_PMIC_READY; if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || - cpu_is_imx6ull()) + cpu_is_imx6ull() || cpu_is_imx6sll()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -631,7 +648,17 @@ void __init imx6dl_pm_init(void) void __init imx6sl_pm_init(void) { - imx6_pm_common_init(&imx6sl_pm_data); + struct regmap *gpr; + + if (cpu_is_imx6sl()) { + imx6_pm_common_init(&imx6sl_pm_data); + } else { + imx6_pm_common_init(&imx6sll_pm_data); + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR5, + IMX6SLL_GPR5_AFCG_X_BYPASS_MASK, 0); + } } void __init imx6sx_pm_init(void) diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index 4ffbbd217e82..c130497dc6cc 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -35,6 +35,8 @@ #define AXP_BOOTROM_BASE 0xfff00000 #define AXP_BOOTROM_SIZE 0x100000 +static struct clk *boot_cpu_clk; + static struct clk *get_cpu_clk(int cpu) { struct clk *cpu_clk; @@ -48,30 +50,6 @@ static struct clk *get_cpu_clk(int cpu) return cpu_clk; } -static void set_secondary_cpu_clock(unsigned int cpu) -{ - int thiscpu; - unsigned long rate; - struct clk *cpu_clk; - - thiscpu = get_cpu(); - - cpu_clk = get_cpu_clk(thiscpu); - if (!cpu_clk) - goto out; - clk_prepare_enable(cpu_clk); - rate = clk_get_rate(cpu_clk); - - cpu_clk = get_cpu_clk(cpu); - if (!cpu_clk) - goto out; - clk_set_rate(cpu_clk, rate); - clk_prepare_enable(cpu_clk); - -out: - put_cpu(); -} - static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) { int ret, hw_cpu; @@ -79,7 +57,6 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) pr_info("Booting CPU %d\n", cpu); hw_cpu = cpu_logical_map(cpu); - set_secondary_cpu_clock(hw_cpu); mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup); /* @@ -122,6 +99,19 @@ static void __init armada_xp_smp_init_cpus(void) panic("Invalid number of CPUs in DT\n"); } +static int armada_xp_sync_secondary_clk(unsigned int cpu) +{ + struct clk *cpu_clk = get_cpu_clk(cpu); + + if (!cpu_clk || !boot_cpu_clk) + return 0; + + clk_prepare_enable(cpu_clk); + clk_set_rate(cpu_clk, clk_get_rate(boot_cpu_clk)); + + return 0; +} + static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) { struct device_node *node; @@ -131,6 +121,14 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) flush_cache_all(); set_cpu_coherent(); + boot_cpu_clk = get_cpu_clk(smp_processor_id()); + if (boot_cpu_clk) { + clk_prepare_enable(boot_cpu_clk); + cpuhp_setup_state_nocalls(CPUHP_AP_ARM_MVEBU_SYNC_CLOCKS, + "arm/mvebu/sync_clocks:online", + armada_xp_sync_secondary_clk, NULL); + } + /* * In order to boot the secondary CPUs we need to ensure * the bootROM is mapped at the correct address. @@ -223,7 +221,6 @@ static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle) int ret, hw_cpu; hw_cpu = cpu_logical_map(cpu); - set_secondary_cpu_clock(hw_cpu); mv98dx3236_resume_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup); diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 27a78c80e5b1..73d5d72dfc3e 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -116,8 +116,8 @@ void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); } -extern unsigned char mvebu_boot_wa_start; -extern unsigned char mvebu_boot_wa_end; +extern unsigned char mvebu_boot_wa_start[]; +extern unsigned char mvebu_boot_wa_end[]; /* * This function sets up the boot address workaround needed for SMP @@ -130,7 +130,7 @@ int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target, phys_addr_t resume_addr_reg) { void __iomem *sram_virt_base; - u32 code_len = &mvebu_boot_wa_end - &mvebu_boot_wa_start; + u32 code_len = mvebu_boot_wa_end - mvebu_boot_wa_start; mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute, diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index bf608441b357..ddc27638ba2a 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -14,11 +14,12 @@ */ #include <linux/linkage.h> -#include <asm/assembler.h> +#include <linux/platform_data/ams-delta-fiq.h> +#include <asm/assembler.h> #include <mach/board-ams-delta.h> -#include <mach/ams-delta-fiq.h> +#include "ams-delta-fiq.h" #include "iomap.h" #include "soc.h" diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index d7ca9e2b40d2..b0dc7ddf5877 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -13,17 +13,20 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/platform_data/ams-delta-fiq.h> +#include <linux/platform_device.h> #include <mach/board-ams-delta.h> #include <asm/fiq.h> -#include <mach/ams-delta-fiq.h> +#include "ams-delta-fiq.h" static struct fiq_handler fh = { .name = "ams-delta-fiq" @@ -34,20 +37,24 @@ static struct fiq_handler fh = { * The FIQ and IRQ isrs can both read and write it. * It is structured as a header section several 32bit slots, * followed by the circular buffer where the FIQ isr stores - * keystrokes received from the qwerty keyboard. - * See ams-delta-fiq.h for details of offsets. + * keystrokes received from the qwerty keyboard. See + * <linux/platform_data/ams-delta-fiq.h> for details of offsets. */ -unsigned int fiq_buffer[1024]; -EXPORT_SYMBOL(fiq_buffer); +static unsigned int fiq_buffer[1024]; +static struct irq_chip *irq_chip; +static struct irq_data *irq_data[16]; static unsigned int irq_counter[16]; +static const char *pin_name[16] __initconst = { + [AMS_DELTA_GPIO_PIN_KEYBRD_DATA] = "keybrd_data", + [AMS_DELTA_GPIO_PIN_KEYBRD_CLK] = "keybrd_clk", +}; + static irqreturn_t deferred_fiq(int irq, void *dev_id) { + struct irq_data *d; int gpio, irq_num, fiq_count; - struct irq_chip *irq_chip; - - irq_chip = irq_get_chip(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); /* * For each handled GPIO interrupt, keep calling its interrupt handler @@ -55,24 +62,21 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) */ for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK; gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) { - irq_num = gpio_to_irq(gpio); + d = irq_data[gpio]; + irq_num = d->irq; fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio]; if (irq_counter[gpio] < fiq_count && gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { - struct irq_data *d = irq_get_irq_data(irq_num); - /* * handle_simple_irq() that OMAP GPIO edge * interrupts default to since commit 80ac93c27441 * requires interrupt already acked and unmasked. */ - if (irq_chip) { - if (irq_chip->irq_ack) - irq_chip->irq_ack(d); - if (irq_chip->irq_unmask) - irq_chip->irq_unmask(d); - } + if (irq_chip->irq_ack) + irq_chip->irq_ack(d); + if (irq_chip->irq_unmask) + irq_chip->irq_unmask(d); } for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++) generic_handle_irq(irq_num); @@ -80,14 +84,56 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) return IRQ_HANDLED; } -void __init ams_delta_init_fiq(void) +void __init ams_delta_init_fiq(struct gpio_chip *chip, + struct platform_device *serio) { + struct gpio_desc *gpiod, *data = NULL, *clk = NULL; void *fiqhandler_start; unsigned int fiqhandler_length; struct pt_regs FIQ_regs; unsigned long val, offset; int i, retval; + /* Store irq_chip location for IRQ handler use */ + irq_chip = chip->irq.chip; + if (!irq_chip) { + pr_err("%s: GPIO chip %s is missing IRQ function\n", __func__, + chip->label); + return; + } + + for (i = 0; i < ARRAY_SIZE(irq_data); i++) { + gpiod = gpiochip_request_own_desc(chip, i, pin_name[i]); + if (IS_ERR(gpiod)) { + pr_err("%s: failed to get GPIO pin %d (%ld)\n", + __func__, i, PTR_ERR(gpiod)); + return; + } + /* Store irq_data location for IRQ handler use */ + irq_data[i] = irq_get_irq_data(gpiod_to_irq(gpiod)); + + /* + * FIQ handler takes full control over serio data and clk GPIO + * pins. Initiaize them and keep requested so nobody can + * interfere. Fail if any of those two couldn't be requested. + */ + switch (i) { + case AMS_DELTA_GPIO_PIN_KEYBRD_DATA: + data = gpiod; + gpiod_direction_input(data); + break; + case AMS_DELTA_GPIO_PIN_KEYBRD_CLK: + clk = gpiod; + gpiod_direction_input(clk); + break; + default: + gpiochip_free_own_desc(gpiod); + break; + } + } + if (!data || !clk) + goto out_gpio; + fiqhandler_start = &qwerty_fiqin_start; fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start; pr_info("Installing fiq handler from %p, length 0x%x\n", @@ -97,7 +143,7 @@ void __init ams_delta_init_fiq(void) if (retval) { pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n", retval); - return; + goto out_gpio; } retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq, @@ -105,7 +151,7 @@ void __init ams_delta_init_fiq(void) if (retval < 0) { pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval); release_fiq(&fh); - return; + goto out_gpio; } /* * Since no set_type() method is provided by OMAP irq chip, @@ -155,4 +201,29 @@ void __init ams_delta_init_fiq(void) offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4; val = omap_readl(OMAP_IH1_BASE + offset) | 1; omap_writel(val, OMAP_IH1_BASE + offset); + + /* Initialize serio device IRQ resource and platform_data */ + serio->resource[0].start = gpiod_to_irq(clk); + serio->resource[0].end = serio->resource[0].start; + serio->dev.platform_data = fiq_buffer; + + /* + * Since FIQ handler performs handling of GPIO registers for + * "keybrd_clk" IRQ pin, ams_delta_serio driver used to set + * handle_simple_irq() as active IRQ handler for that pin to avoid + * bad interaction with gpio-omap driver. This is no longer needed + * as handle_simple_irq() is now the default handler for OMAP GPIO + * edge interrupts. + * This comment replaces the obsolete code which has been removed + * from the ams_delta_serio driver and stands here only as a reminder + * of that dependency on gpio-omap driver behavior. + */ + + return; + +out_gpio: + if (data) + gpiochip_free_own_desc(data); + if (clk) + gpiochip_free_own_desc(clk); } diff --git a/arch/arm/mach-omap1/ams-delta-fiq.h b/arch/arm/mach-omap1/ams-delta-fiq.h new file mode 100644 index 000000000000..fd76df3cce37 --- /dev/null +++ b/arch/arm/mach-omap1/ams-delta-fiq.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * arch/arm/mach-omap1/ams-delta-fiq.h + * + * Taken from the original Amstrad modifications to fiq.h + * + * Copyright (c) 2004 Amstrad Plc + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __AMS_DELTA_FIQ_H +#define __AMS_DELTA_FIQ_H + +#include <mach/irqs.h> + +/* + * Interrupt number used for passing control from FIQ to IRQ. + * IRQ12, described as reserved, has been selected. + */ +#define INT_DEFERRED_FIQ INT_1510_RES12 +/* + * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to. + */ +#if (INT_DEFERRED_FIQ < IH2_BASE) +#define DEFERRED_FIQ_IH_BASE OMAP_IH1_BASE +#else +#define DEFERRED_FIQ_IH_BASE OMAP_IH2_BASE +#endif + +#ifndef __ASSEMBLER__ +extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end; + +extern void __init ams_delta_init_fiq(struct gpio_chip *chip, + struct platform_device *pdev); +#endif + +#endif diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 80f54cb54276..dd28d2614d7f 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -41,10 +41,10 @@ #include <mach/mux.h> #include <mach/hardware.h> -#include <mach/ams-delta-fiq.h> #include "camera.h" #include <mach/usb.h> +#include "ams-delta-fiq.h" #include "iomap.h" #include "common.h" @@ -179,7 +179,10 @@ static struct resource latch1_resources[] = { }, }; +#define LATCH1_LABEL "latch1" + static struct bgpio_pdata latch1_pdata = { + .label = LATCH1_LABEL, .base = LATCH1_GPIO_BASE, .ngpio = LATCH1_NGPIO, }; @@ -194,6 +197,15 @@ static struct platform_device latch1_gpio_device = { }, }; +#define LATCH1_PIN_LED_CAMERA 0 +#define LATCH1_PIN_LED_ADVERT 1 +#define LATCH1_PIN_LED_MAIL 2 +#define LATCH1_PIN_LED_HANDSFREE 3 +#define LATCH1_PIN_LED_VOICEMAIL 4 +#define LATCH1_PIN_LED_VOICE 5 +#define LATCH1_PIN_DOCKIT1 6 +#define LATCH1_PIN_DOCKIT2 7 + static struct resource latch2_resources[] = { [0] = { .name = "dat", @@ -398,38 +410,43 @@ static struct gpiod_lookup_table ams_delta_lcd_gpio_table = { }, }; -static const struct gpio_led gpio_leds[] __initconst = { - { +/* + * Dynamically allocated GPIO numbers must be obtained fromm GPIO device + * before they can be put in the gpio_led table. Before that happens, + * initialize the table with invalid GPIO numbers, not 0. + */ +static struct gpio_led gpio_leds[] __initdata = { + [LATCH1_PIN_LED_CAMERA] = { .name = "camera", - .gpio = LATCH1_GPIO_BASE + 0, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, #ifdef CONFIG_LEDS_TRIGGERS .default_trigger = "ams_delta_camera", #endif }, - { + [LATCH1_PIN_LED_ADVERT] = { .name = "advert", - .gpio = LATCH1_GPIO_BASE + 1, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_MAIL] = { .name = "email", - .gpio = LATCH1_GPIO_BASE + 2, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_HANDSFREE] = { .name = "handsfree", - .gpio = LATCH1_GPIO_BASE + 3, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_VOICEMAIL] = { .name = "voicemail", - .gpio = LATCH1_GPIO_BASE + 4, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_VOICE] = { .name = "voice", - .gpio = LATCH1_GPIO_BASE + 5, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, }; @@ -504,16 +521,70 @@ static struct platform_device cx20442_codec_device = { .id = -1, }; -static struct gpiod_lookup_table ams_delta_serio_gpio_table = { +static struct resource ams_delta_serio_resources[] = { + { + .flags = IORESOURCE_IRQ, + /* + * Initialize IRQ resource with invalid IRQ number. + * It will be replaced with dynamically allocated GPIO IRQ + * obtained from GPIO chip as soon as the chip is available. + */ + .start = -EINVAL, + .end = -EINVAL, + }, +}; + +static struct platform_device ams_delta_serio_device = { + .name = "ams-delta-serio", + .id = PLATFORM_DEVID_NONE, + .dev = { + /* + * Initialize .platform_data explicitly with NULL to + * indicate it is going to be used. It will be replaced + * with FIQ buffer address as soon as FIQ is initialized. + */ + .platform_data = NULL, + }, + .num_resources = ARRAY_SIZE(ams_delta_serio_resources), + .resource = ams_delta_serio_resources, +}; + +static struct regulator_consumer_supply keybrd_pwr_consumers[] = { + /* + * Initialize supply .dev_name with NULL. It will be replaced + * with serio dev_name() as soon as the serio device is registered. + */ + REGULATOR_SUPPLY("vcc", NULL), +}; + +static struct regulator_init_data keybrd_pwr_initdata = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(keybrd_pwr_consumers), + .consumer_supplies = keybrd_pwr_consumers, +}; + +static struct fixed_voltage_config keybrd_pwr_config = { + .supply_name = "keybrd_pwr", + .microvolts = 5000000, + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, + .enable_high = 1, + .init_data = &keybrd_pwr_initdata, +}; + +static struct platform_device keybrd_pwr_device = { + .name = "reg-fixed-voltage", + .id = PLATFORM_DEVID_AUTO, + .dev = { + .platform_data = &keybrd_pwr_config, + }, +}; + +static struct gpiod_lookup_table keybrd_pwr_gpio_table = { .table = { - GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_KEYBRD_DATA, - "data", 0), - GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_KEYBRD_CLK, - "clock", 0), - GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR, - "power", 0), - GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, - "dataout", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR, NULL, + GPIO_ACTIVE_HIGH), { }, }, }; @@ -524,9 +595,7 @@ static struct platform_device *ams_delta_devices[] __initdata = { &ams_delta_kp_device, &ams_delta_camera_device, &ams_delta_audio_device, -}; - -static struct platform_device *late_devices[] __initdata = { + &ams_delta_serio_device, &ams_delta_nand_device, &ams_delta_lcd_device, &cx20442_codec_device, @@ -534,14 +603,55 @@ static struct platform_device *late_devices[] __initdata = { static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { &ams_delta_audio_gpio_table, - &ams_delta_serio_gpio_table, -}; - -static struct gpiod_lookup_table *late_gpio_tables[] __initdata = { + &keybrd_pwr_gpio_table, &ams_delta_lcd_gpio_table, &ams_delta_nand_gpio_table, }; +/* + * Some drivers may not use GPIO lookup tables but need to be provided + * with GPIO numbers. The same applies to GPIO based IRQ lines - some + * drivers may even not use GPIO layer but expect just IRQ numbers. + * We could either define GPIO lookup tables then use them on behalf + * of those devices, or we can use GPIO driver level methods for + * identification of GPIO and IRQ numbers. For the purpose of the latter, + * defina a helper function which identifies GPIO chips by their labels. + */ +static int gpiochip_match_by_label(struct gpio_chip *chip, void *data) +{ + char *label = data; + + return !strcmp(label, chip->label); +} + +static struct gpiod_hog ams_delta_gpio_hogs[] = { + GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout", + GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), + {}, +}; + +/* + * The purpose of this function is to take care of proper initialization of + * devices and data structures which depend on GPIO lines provided by OMAP GPIO + * banks but their drivers don't use GPIO lookup tables or GPIO layer at all. + * The function may be called as soon as OMAP GPIO devices are probed. + * Since that happens at postcore_initcall, it can be called successfully + * from init_machine or later. + * Dependent devices may be registered from within this function or later. + */ +static void __init omap_gpio_deps_init(void) +{ + struct gpio_chip *chip; + + chip = gpiochip_find(OMAP_GPIO_LABEL, gpiochip_match_by_label); + if (!chip) { + pr_err("%s: OMAP GPIO chip not found\n", __func__); + return; + } + + ams_delta_init_fiq(chip, &ams_delta_serio_device); +} + static void __init ams_delta_init(void) { /* mux pins for uarts */ @@ -562,6 +672,9 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); + omap_gpio_deps_init(); + gpiod_add_hogs(ams_delta_gpio_hogs); + omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); @@ -571,25 +684,38 @@ static void __init ams_delta_init(void) led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); #endif - gpio_led_register_device(-1, &leds_pdata); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); /* - * As soon as devices have been registered, assign their dev_names - * to respective GPIO lookup tables before they are added. + * As soon as regulator consumers have been registered, assign their + * dev_names to consumer supply entries of respective regulators. + */ + keybrd_pwr_consumers[0].dev_name = + dev_name(&ams_delta_serio_device.dev); + + /* + * Once consumer supply entries are populated with dev_names, + * register regulator devices. At this stage only the keyboard + * power regulator has its consumer supply table fully populated. + */ + platform_device_register(&keybrd_pwr_device); + + /* + * As soon as GPIO consumers have been registered, assign + * their dev_names to respective GPIO lookup tables. */ ams_delta_audio_gpio_table.dev_id = dev_name(&ams_delta_audio_device.dev); + keybrd_pwr_gpio_table.dev_id = dev_name(&keybrd_pwr_device.dev); + ams_delta_nand_gpio_table.dev_id = dev_name(&ams_delta_nand_device.dev); + ams_delta_lcd_gpio_table.dev_id = dev_name(&ams_delta_lcd_device.dev); + /* - * No device name is assigned to GPIO lookup table for serio device - * as long as serio driver is not converted to platform device driver. + * Once GPIO lookup tables are populated with dev_names, register them. */ - gpiod_add_lookup_tables(ams_delta_gpio_tables, ARRAY_SIZE(ams_delta_gpio_tables)); - ams_delta_init_fiq(); - omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); omapfb_set_lcd_config(&ams_delta_lcd_config); @@ -643,35 +769,84 @@ static struct platform_device ams_delta_modem_device = { }, }; -static int __init late_init(void) +/* + * leds-gpio driver doesn't make use of GPIO lookup tables, + * it has to be provided with GPIO numbers over platform data + * if GPIO descriptor info can't be obtained from device tree. + * We could either define GPIO lookup tables and use them on behalf + * of the leds-gpio device, or we can use GPIO driver level methods + * for identification of GPIO numbers as long as we don't support + * device tree. Let's do the latter. + */ +static void __init ams_delta_led_init(struct gpio_chip *chip) +{ + struct gpio_desc *gpiod; + int i; + + for (i = LATCH1_PIN_LED_CAMERA; i < LATCH1_PIN_DOCKIT1; i++) { + gpiod = gpiochip_request_own_desc(chip, i, NULL); + if (IS_ERR(gpiod)) { + pr_warn("%s: %s GPIO %d request failed (%ld)\n", + __func__, LATCH1_LABEL, i, PTR_ERR(gpiod)); + continue; + } + + /* Assign GPIO numbers to LED device. */ + gpio_leds[i].gpio = desc_to_gpio(gpiod); + + gpiochip_free_own_desc(gpiod); + } + + gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata); +} + +/* + * The purpose of this function is to take care of assignment of GPIO numbers + * to platform devices which depend on GPIO lines provided by Amstrad Delta + * latch1 and/or latch2 GPIO devices but don't use GPIO lookup tables. + * The function may be called as soon as latch1/latch2 GPIO devices are + * initilized. Since basic-mmio-gpio driver is not registered before + * device_initcall, this may happen at erliest during device_initcall_sync. + * Dependent devices shouldn't be registered before that, their + * registration may be performed from within this function or later. + */ +static int __init ams_delta_gpio_init(void) { + struct gpio_chip *chip; int err; if (!machine_is_ams_delta()) return -ENODEV; + chip = gpiochip_find(LATCH1_LABEL, gpiochip_match_by_label); + if (!chip) + pr_err("%s: latch1 GPIO chip not found\n", __func__); + else + ams_delta_led_init(chip); + err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); - if (err) { + if (err) pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); - return err; - } - platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); - - /* - * As soon as devices have been registered, assign their dev_names - * to respective GPIO lookup tables before they are added. - */ - ams_delta_lcd_gpio_table.dev_id = dev_name(&ams_delta_lcd_device.dev); - ams_delta_nand_gpio_table.dev_id = dev_name(&ams_delta_nand_device.dev); + return err; +} +device_initcall_sync(ams_delta_gpio_init); - gpiod_add_lookup_tables(late_gpio_tables, ARRAY_SIZE(late_gpio_tables)); +static int __init modem_nreset_init(void) +{ + int err; err = platform_device_register(&modem_nreset_device); - if (err) { + if (err) pr_err("Couldn't register the modem regulator device\n"); - return err; - } + + return err; +} + + +static int __init ams_delta_modem_init(void) +{ + int err; omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = @@ -692,7 +867,22 @@ static int __init late_init(void) err = platform_device_register(&ams_delta_modem_device); if (err) - goto gpio_free; + gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + + return err; +} + +static int __init late_init(void) +{ + int err; + + err = modem_nreset_init(); + if (err) + return err; + + err = ams_delta_modem_init(); + if (err) + return err; /* * Once the modem device is registered, the modem_nreset @@ -708,7 +898,6 @@ static int __init late_init(void) unregister: platform_device_unregister(&ams_delta_modem_device); -gpio_free: gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); return err; } diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index ab51f8554697..9aeb8ad8c327 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -274,7 +274,7 @@ static struct platform_device h2_kp_device = { .resource = h2_kp_resources, }; -static struct gpio_led h2_gpio_led_pins[] = { +static const struct gpio_led h2_gpio_led_pins[] = { { .name = "h2:red", .default_trigger = "heartbeat", diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ad339f51cc78..2edcd6356f2d 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -326,7 +326,7 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { }, }; -static struct gpio_led h3_gpio_led_pins[] = { +static const struct gpio_led h3_gpio_led_pins[] = { { .name = "h3:red", .default_trigger = "heartbeat", diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index da8f3fc3180f..5733212759d3 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -292,7 +292,7 @@ static struct platform_device herald_gpiokeys_device = { }; /* LEDs for the Herald. These connect to the HTCPLD GPIO device. */ -static struct gpio_led gpio_leds[] = { +static const struct gpio_led gpio_leds[] = { {"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, {"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, {"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 9ffa8d755a59..4df15e693b6e 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -167,7 +167,7 @@ static struct platform_device *osk5912_devices[] __initdata = { &osk5912_cf_device, }; -static struct gpio_led tps_leds[] = { +static const struct gpio_led tps_leds[] = { /* NOTE: D9 and D2 have hardware blink support. * Also, D9 requires non-battery power. */ @@ -385,7 +385,7 @@ static struct platform_device osk5912_lcd_device = { .id = -1, }; -static struct gpio_led mistral_gpio_led_pins[] = { +static const struct gpio_led mistral_gpio_led_pins[] = { { .name = "mistral:red", .default_trigger = "heartbeat", diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h deleted file mode 100644 index 6dfc3e1210a3..000000000000 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * arch/arm/mach-omap1/include/ams-delta-fiq.h - * - * Taken from the original Amstrad modifications to fiq.h - * - * Copyright (c) 2004 Amstrad Plc - * Copyright (c) 2006 Matt Callow - * Copyright (c) 2010 Janusz Krzysztofik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __AMS_DELTA_FIQ_H -#define __AMS_DELTA_FIQ_H - -#include <mach/irqs.h> - -/* - * Interrupt number used for passing control from FIQ to IRQ. - * IRQ12, described as reserved, has been selected. - */ -#define INT_DEFERRED_FIQ INT_1510_RES12 -/* - * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to. - */ -#if (INT_DEFERRED_FIQ < IH2_BASE) -#define DEFERRED_FIQ_IH_BASE OMAP_IH1_BASE -#else -#define DEFERRED_FIQ_IH_BASE OMAP_IH2_BASE -#endif - -/* - * These are the offsets from the beginning of the fiq_buffer. They are put here - * since the buffer and header need to be accessed by drivers servicing devices - * which generate GPIO interrupts - e.g. keyboard, modem, hook switch. - */ -#define FIQ_MASK 0 -#define FIQ_STATE 1 -#define FIQ_KEYS_CNT 2 -#define FIQ_TAIL_OFFSET 3 -#define FIQ_HEAD_OFFSET 4 -#define FIQ_BUF_LEN 5 -#define FIQ_KEY 6 -#define FIQ_MISSED_KEYS 7 -#define FIQ_BUFFER_START 8 -#define FIQ_GPIO_INT_MASK 9 -#define FIQ_KEYS_HICNT 10 -#define FIQ_IRQ_PEND 11 -#define FIQ_SIR_CODE_L1 12 -#define IRQ_SIR_CODE_L2 13 - -#define FIQ_CNT_INT_00 14 -#define FIQ_CNT_INT_KEY 15 -#define FIQ_CNT_INT_MDM 16 -#define FIQ_CNT_INT_03 17 -#define FIQ_CNT_INT_HSW 18 -#define FIQ_CNT_INT_05 19 -#define FIQ_CNT_INT_06 20 -#define FIQ_CNT_INT_07 21 -#define FIQ_CNT_INT_08 22 -#define FIQ_CNT_INT_09 23 -#define FIQ_CNT_INT_10 24 -#define FIQ_CNT_INT_11 25 -#define FIQ_CNT_INT_12 26 -#define FIQ_CNT_INT_13 27 -#define FIQ_CNT_INT_14 28 -#define FIQ_CNT_INT_15 29 - -#define FIQ_CIRC_BUFF 30 /*Start of circular buffer */ - -#ifndef __ASSEMBLER__ -extern unsigned int fiq_buffer[]; -extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end; - -extern void __init ams_delta_init_fiq(void); -#endif - -#endif diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c index b68f9c0aff0b..d5ddba00bb73 100644 --- a/arch/arm/mach-omap2/omap_hwmod_reset.c +++ b/arch/arm/mach-omap2/omap_hwmod_reset.c @@ -92,11 +92,13 @@ static void omap_rtc_wait_not_busy(struct omap_hwmod *oh) */ void omap_hwmod_rtc_unlock(struct omap_hwmod *oh) { - local_irq_disable(); + unsigned long flags; + + local_irq_save(flags); omap_rtc_wait_not_busy(oh); omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG); omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG); - local_irq_enable(); + local_irq_restore(flags); } /** @@ -110,9 +112,11 @@ void omap_hwmod_rtc_unlock(struct omap_hwmod *oh) */ void omap_hwmod_rtc_lock(struct omap_hwmod *oh) { - local_irq_disable(); + unsigned long flags; + + local_irq_save(flags); omap_rtc_wait_not_busy(oh); omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG); omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG); - local_irq_enable(); + local_irq_restore(flags); } diff --git a/arch/arm/mach-omap2/pm-asm-offsets.c b/arch/arm/mach-omap2/pm-asm-offsets.c index b9846b19e5e2..d8ae8a85b14b 100644 --- a/arch/arm/mach-omap2/pm-asm-offsets.c +++ b/arch/arm/mach-omap2/pm-asm-offsets.c @@ -27,6 +27,8 @@ int main(void) offsetof(struct am33xx_pm_ro_sram_data, amx3_pm_sram_data_virt)); DEFINE(AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET, offsetof(struct am33xx_pm_ro_sram_data, amx3_pm_sram_data_phys)); + DEFINE(AMX3_PM_RTC_BASE_VIRT_OFFSET, + offsetof(struct am33xx_pm_ro_sram_data, rtc_base_virt)); DEFINE(AMX3_PM_RO_SRAM_DATA_SIZE, sizeof(struct am33xx_pm_ro_sram_data)); diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index acb698d5780f..5a8839203958 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -47,11 +47,6 @@ static int pm_dbg_init_done; static int pm_dbg_init(void); -enum { - DEBUG_FILE_COUNTERS = 0, - DEBUG_FILE_TIMERS, -}; - static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = { "OFF", "RET", @@ -141,39 +136,21 @@ static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user) return 0; } -static int pm_dbg_show_counters(struct seq_file *s, void *unused) +static int pm_dbg_counters_show(struct seq_file *s, void *unused) { pwrdm_for_each(pwrdm_dbg_show_counter, s); clkdm_for_each(clkdm_dbg_show_counter, s); return 0; } +DEFINE_SHOW_ATTRIBUTE(pm_dbg_counters); -static int pm_dbg_show_timers(struct seq_file *s, void *unused) +static int pm_dbg_timers_show(struct seq_file *s, void *unused) { pwrdm_for_each(pwrdm_dbg_show_timer, s); return 0; } - -static int pm_dbg_open(struct inode *inode, struct file *file) -{ - switch ((int)inode->i_private) { - case DEBUG_FILE_COUNTERS: - return single_open(file, pm_dbg_show_counters, - &inode->i_private); - case DEBUG_FILE_TIMERS: - default: - return single_open(file, pm_dbg_show_timers, - &inode->i_private); - } -} - -static const struct file_operations debug_fops = { - .open = pm_dbg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(pm_dbg_timers); static int pwrdm_suspend_get(void *data, u64 *val) { @@ -259,10 +236,8 @@ static int __init pm_dbg_init(void) if (!d) return -EINVAL; - (void) debugfs_create_file("count", S_IRUGO, - d, (void *)DEBUG_FILE_COUNTERS, &debug_fops); - (void) debugfs_create_file("time", S_IRUGO, - d, (void *)DEBUG_FILE_TIMERS, &debug_fops); + (void) debugfs_create_file("count", 0444, d, NULL, &pm_dbg_counters_fops); + (void) debugfs_create_file("time", 0444, d, NULL, &pm_dbg_timers_fops); pwrdm_for_each(pwrdms_setup, (void *)d); diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c index 9b3755a2e2ec..f4971e4a86b2 100644 --- a/arch/arm/mach-omap2/pm33xx-core.c +++ b/arch/arm/mach-omap2/pm33xx-core.c @@ -26,6 +26,7 @@ static struct powerdomain *cefuse_pwrdm, *gfx_pwrdm, *per_pwrdm, *mpu_pwrdm; static struct clockdomain *gfx_l4ls_clkdm; static void __iomem *scu_base; +static struct omap_hwmod *rtc_oh; static int __init am43xx_map_scu(void) { @@ -106,12 +107,13 @@ static void amx3_post_suspend_common(void) pr_err("PM: GFX domain did not transition: %x\n", status); } -static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long)) +static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long), + unsigned long args) { int ret = 0; amx3_pre_suspend_common(); - ret = cpu_suspend(0, fn); + ret = cpu_suspend(args, fn); amx3_post_suspend_common(); /* @@ -128,13 +130,14 @@ static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long)) return ret; } -static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long)) +static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long), + unsigned long args) { int ret = 0; amx3_pre_suspend_common(); scu_power_mode(scu_base, SCU_PM_POWEROFF); - ret = cpu_suspend(0, fn); + ret = cpu_suspend(args, fn); scu_power_mode(scu_base, SCU_PM_NORMAL); amx3_post_suspend_common(); @@ -151,16 +154,25 @@ static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void) return NULL; } +void __iomem *am43xx_get_rtc_base_addr(void) +{ + rtc_oh = omap_hwmod_lookup("rtc"); + + return omap_hwmod_get_mpu_rt_va(rtc_oh); +} + static struct am33xx_pm_platform_data am33xx_ops = { .init = am33xx_suspend_init, .soc_suspend = am33xx_suspend, .get_sram_addrs = amx3_get_sram_addrs, + .get_rtc_base_addr = am43xx_get_rtc_base_addr, }; static struct am33xx_pm_platform_data am43xx_ops = { .init = am43xx_suspend_init, .soc_suspend = am43xx_suspend, .get_sram_addrs = amx3_get_sram_addrs, + .get_rtc_base_addr = am43xx_get_rtc_base_addr, }; static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void) diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S index 322b3bb868b4..47a816468cdb 100644 --- a/arch/arm/mach-omap2/sleep33xx.S +++ b/arch/arm/mach-omap2/sleep33xx.S @@ -8,6 +8,7 @@ #include <generated/ti-pm-asm-offsets.h> #include <linux/linkage.h> +#include <linux/platform_data/pm33xx.h> #include <linux/ti-emif-sram.h> #include <asm/assembler.h> #include <asm/memory.h> @@ -19,12 +20,25 @@ #define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003 #define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002 +/* replicated define because linux/bitops.h cannot be included in assembly */ +#define BIT(nr) (1 << (nr)) + .arm .align 3 ENTRY(am33xx_do_wfi) stmfd sp!, {r4 - r11, lr} @ save registers on stack + /* Save wfi_flags arg to data space */ + mov r4, r0 + adr r3, am33xx_pm_ro_sram_data + ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET] + str r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET] + + /* Only flush cache is we know we are losing MPU context */ + tst r4, #WFI_FLAG_FLUSH_CACHE + beq cache_skip_flush + /* * Flush all data from the L1 and L2 data cache before disabling * SCTLR.C bit. @@ -48,14 +62,33 @@ ENTRY(am33xx_do_wfi) ldr r1, kernel_flush blx r1 + adr r3, am33xx_pm_ro_sram_data + ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET] + ldr r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET] + +cache_skip_flush: + /* Check if we want self refresh */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_enter_sr + adr r9, am33xx_emif_sram_table ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET] blx r3 +emif_skip_enter_sr: + /* Only necessary if PER is losing context */ + tst r4, #WFI_FLAG_SAVE_EMIF + beq emif_skip_save + ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET] blx r3 +emif_skip_save: + /* Only can disable EMIF if we have entered self refresh */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_disable + /* Disable EMIF */ ldr r1, virt_emif_clkctrl ldr r2, [r1] @@ -69,6 +102,10 @@ wait_emif_disable: cmp r2, r3 bne wait_emif_disable +emif_skip_disable: + tst r4, #WFI_FLAG_WAKE_M3 + beq wkup_m3_skip + /* * For the MPU WFI to be registered as an interrupt * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set @@ -79,6 +116,7 @@ wait_emif_disable: bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE str r2, [r1] +wkup_m3_skip: /* * Execute an ISB instruction to ensure that all of the * CP15 register changes have been committed. @@ -132,10 +170,18 @@ wait_emif_enable: cmp r2, r3 bne wait_emif_enable + /* Only necessary if PER is losing context */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_exit_sr_abt + adr r9, am33xx_emif_sram_table ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET] blx r1 +emif_skip_exit_sr_abt: + tst r4, #WFI_FLAG_FLUSH_CACHE + beq cache_skip_restore + /* * Set SCTLR.C bit to allow data cache allocation */ @@ -144,6 +190,7 @@ wait_emif_enable: mcr p15, 0, r0, c1, c0, 0 isb +cache_skip_restore: /* Let the suspend code know about the abort */ mov r0, #1 ldmfd sp!, {r4 - r11, pc} @ restore regs and return @@ -181,8 +228,6 @@ ENDPROC(am33xx_resume_from_deep_sleep) * Local variables */ .align -resume_addr: - .word cpu_resume - PAGE_OFFSET + 0x80000000 kernel_flush: .word v7_flush_dcache_all virt_mpu_clkctrl: @@ -205,6 +250,9 @@ ENTRY(am33xx_pm_sram) .word am33xx_emif_sram_table .word am33xx_pm_ro_sram_data +resume_addr: +.word cpu_resume - PAGE_OFFSET + 0x80000000 + .align 3 ENTRY(am33xx_pm_ro_sram_data) .space AMX3_PM_RO_SRAM_DATA_SIZE diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S index 8903814a6677..5b9343b58fc7 100644 --- a/arch/arm/mach-omap2/sleep43xx.S +++ b/arch/arm/mach-omap2/sleep43xx.S @@ -9,7 +9,7 @@ #include <generated/ti-pm-asm-offsets.h> #include <linux/linkage.h> #include <linux/ti-emif-sram.h> - +#include <linux/platform_data/pm33xx.h> #include <asm/assembler.h> #include <asm/hardware/cache-l2x0.h> #include <asm/memory.h> @@ -22,6 +22,9 @@ #include "prm33xx.h" #include "prcm43xx.h" +/* replicated define because linux/bitops.h cannot be included in assembly */ +#define BIT(nr) (1 << (nr)) + #define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED 0x00030000 #define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003 #define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002 @@ -45,12 +48,25 @@ AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET) #define AM43XX_PRM_EMIF_CTRL_OFFSET 0x0030 +#define RTC_SECONDS_REG 0x0 +#define RTC_PMIC_REG 0x98 +#define RTC_PMIC_POWER_EN BIT(16) +#define RTC_PMIC_EXT_WAKEUP_STS BIT(12) +#define RTC_PMIC_EXT_WAKEUP_POL BIT(4) +#define RTC_PMIC_EXT_WAKEUP_EN BIT(0) + .arm .align 3 ENTRY(am43xx_do_wfi) stmfd sp!, {r4 - r11, lr} @ save registers on stack + /* Save wfi_flags arg to data space */ + mov r4, r0 + adr r3, am43xx_pm_ro_sram_data + ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET] + str r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET] + #ifdef CONFIG_CACHE_L2X0 /* Retrieve l2 cache virt address BEFORE we shut off EMIF */ ldr r1, get_l2cache_base @@ -58,6 +74,10 @@ ENTRY(am43xx_do_wfi) mov r8, r0 #endif + /* Only flush cache is we know we are losing MPU context */ + tst r4, #WFI_FLAG_FLUSH_CACHE + beq cache_skip_flush + /* * Flush all data from the L1 and L2 data cache before disabling * SCTLR.C bit. @@ -128,13 +148,47 @@ sync: bne sync #endif + /* Restore wfi_flags */ + adr r3, am43xx_pm_ro_sram_data + ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET] + ldr r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET] + +cache_skip_flush: + /* + * If we are trying to enter RTC+DDR mode we must perform + * a read from the rtc address space to ensure translation + * presence in the TLB to avoid page table walk after DDR + * is unavailable. + */ + tst r4, #WFI_FLAG_RTC_ONLY + beq skip_rtc_va_refresh + + adr r3, am43xx_pm_ro_sram_data + ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET] + ldr r0, [r1] + +skip_rtc_va_refresh: + /* Check if we want self refresh */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_enter_sr + adr r9, am43xx_emif_sram_table ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET] blx r3 +emif_skip_enter_sr: + /* Only necessary if PER is losing context */ + tst r4, #WFI_FLAG_SAVE_EMIF + beq emif_skip_save + ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET] - blx r3 + blx r3 + +emif_skip_save: + /* Only can disable EMIF if we have entered self refresh */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_disable /* Disable EMIF */ ldr r1, am43xx_virt_emif_clkctrl @@ -148,6 +202,38 @@ wait_emif_disable: cmp r2, r3 bne wait_emif_disable +emif_skip_disable: + tst r4, #WFI_FLAG_RTC_ONLY + beq skip_rtc_only + + adr r3, am43xx_pm_ro_sram_data + ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET] + + ldr r0, [r1, #RTC_PMIC_REG] + orr r0, r0, #RTC_PMIC_POWER_EN + orr r0, r0, #RTC_PMIC_EXT_WAKEUP_STS + orr r0, r0, #RTC_PMIC_EXT_WAKEUP_EN + orr r0, r0, #RTC_PMIC_EXT_WAKEUP_POL + str r0, [r1, #RTC_PMIC_REG] + ldr r0, [r1, #RTC_PMIC_REG] + /* Wait for 2 seconds to lose power */ + mov r3, #2 + ldr r2, [r1, #RTC_SECONDS_REG] +rtc_loop: + ldr r0, [r1, #RTC_SECONDS_REG] + cmp r0, r2 + beq rtc_loop + mov r2, r0 + subs r3, r3, #1 + bne rtc_loop + + b re_enable_emif + +skip_rtc_only: + + tst r4, #WFI_FLAG_WAKE_M3 + beq wkup_m3_skip + /* * For the MPU WFI to be registered as an interrupt * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set @@ -165,6 +251,7 @@ wait_emif_disable: mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP str r2, [r1] +wkup_m3_skip: /* * Execute a barrier instruction to ensure that all cache, * TLB and branch predictor maintenance operations issued @@ -209,6 +296,7 @@ wait_emif_disable: mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE str r2, [r1] +re_enable_emif: /* Re-enable EMIF */ ldr r1, am43xx_virt_emif_clkctrl mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE @@ -218,6 +306,9 @@ wait_emif_enable: cmp r2, r3 bne wait_emif_enable + tst r4, #WFI_FLAG_FLUSH_CACHE + beq cache_skip_restore + /* * Set SCTLR.C bit to allow data cache allocation */ @@ -226,9 +317,16 @@ wait_emif_enable: mcr p15, 0, r0, c1, c0, 0 isb - ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET] - blx r1 +cache_skip_restore: + /* Only necessary if PER is losing context */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_exit_sr_abt + + adr r9, am43xx_emif_sram_table + ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET] + blx r1 +emif_skip_exit_sr_abt: /* Let the suspend code know about the abort */ mov r0, #1 ldmfd sp!, {r4 - r11, pc} @ restore regs and return @@ -333,8 +431,6 @@ ENDPROC(am43xx_resume_from_deep_sleep) * Local variables */ .align -resume_addr: - .word cpu_resume - PAGE_OFFSET + 0x80000000 kernel_flush: .word v7_flush_dcache_all ddr_start: @@ -381,6 +477,8 @@ ENTRY(am43xx_pm_sram) .word am43xx_emif_sram_table .word am43xx_pm_ro_sram_data +resume_addr: + .word cpu_resume - PAGE_OFFSET + 0x80000000 .align 3 ENTRY(am43xx_pm_ro_sram_data) diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 5a16ea74e28a..a24783a03827 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -3,6 +3,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/clkdev.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/spi/pxa2xx_spi.h> @@ -477,6 +478,18 @@ struct platform_device pxa_device_ac97 = { void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops) { + int ret; + + ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:0", "AC97CLK", + &pxa_device_ac97.dev); + if (ret) + pr_err("PXA AC97 clock1 alias error: %d\n", ret); + + ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:1", "AC97CLK", + &pxa_device_ac97.dev); + if (ret) + pr_err("PXA AC97 clock2 alias error: %d\n", ret); + pxa_register_device(&pxa_device_ac97, ops); } diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index e2e7f247a645..b79b757fdd41 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -54,6 +54,7 @@ #include "devices.h" #include "generic.h" +#include "udc.h" /* Physical address space information */ @@ -594,6 +595,8 @@ static struct platform_device gpio_vbus = { }, }; +static struct pxa2xx_udc_mach_info hx4700_udc_info; + /* * Touchscreen - TSC2046 connected to SSP2 */ @@ -891,6 +894,7 @@ static void __init hx4700_init(void) gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1); mdelay(10); + pxa_set_udc_info(&hx4700_udc_info); regulator_has_full_constraints(); } diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 9b6c7ea45a40..04dc78d0809f 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -677,14 +677,12 @@ MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) -MIO_SIMPLE_DEV(wm9713_acodec, "wm9713-codec", NULL); MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); static struct platform_device *devices[] __initdata = { &mioa701_gpio_keys, &mioa701_backlight, &mioa701_led, - &wm9713_acodec, &pxa2xx_pcm, &mioa701_sound, &power_dev, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index d69de312d8d9..52e70a5c1281 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -47,16 +47,6 @@ int wm9713_irq; int lcd_id; int lcd_orientation; -struct platform_device pxa_device_wm9713_audio = { - .name = "wm9713-codec", - .id = -1, -}; - -static void __init zylonite_init_wm9713_audio(void) -{ - platform_device_register(&pxa_device_wm9713_audio); -} - static struct resource smc91x_resources[] = { [0] = { .start = ZYLONITE_ETH_PHYS + 0x300, @@ -428,7 +418,6 @@ static void __init zylonite_init(void) zylonite_init_nand(); zylonite_init_leds(); zylonite_init_ohci(); - zylonite_init_wm9713_audio(); } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h index b6b32724ace8..4ff83f956cfb 100644 --- a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h +++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h @@ -6,7 +6,7 @@ */ #ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H -#define __ARCH_ARM_REGS_S3C24XX_S3C2412_H __FILE__ +#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__ #define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) #define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0b67254eabb2..aeb2eed08598 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -15,6 +15,7 @@ config ARCH_RCAR_GEN1 config ARCH_RCAR_GEN2 bool + select HAVE_ARM_ARCH_TIMER select PM select PM_GENERIC_DOMAINS select RENESAS_IRQC @@ -58,6 +59,7 @@ config ARCH_R8A73A4 bool "R-Mobile APE6 (R8A73A40)" select ARCH_RMOBILE select ARM_ERRATA_798181 if SMP + select HAVE_ARM_ARCH_TIMER select RENESAS_IRQC config ARCH_R8A7740 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 1939f521579c..b33dc59d8698 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -11,9 +11,7 @@ obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o -obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o -obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o +obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o @@ -23,17 +21,15 @@ cpu-y := platsmp.o headsmp.o # Shared SoC family objects obj-$(CONFIG_ARCH_RCAR_GEN2) += setup-rcar-gen2.o platsmp-apmu.o $(cpu-y) CFLAGS_setup-rcar-gen2.o += -march=armv7-a -obj-$(CONFIG_ARCH_RCAR_GEN2) += headsmp-apmu.o obj-$(CONFIG_ARCH_R8A7790) += regulator-quirk-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7791) += regulator-quirk-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7793) += regulator-quirk-rcar-gen2.o # SMP objects smp-y := $(cpu-y) +smp-$(CONFIG_ARCH_RCAR_GEN2) += headsmp-apmu.o smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o -smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o -smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o # PM objects diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 2109f123bdfb..3ac4b36b5c2b 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -15,7 +15,6 @@ extern void shmobile_smp_sleep(void); extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); extern bool shmobile_smp_cpu_can_disable(unsigned int cpu); -extern bool shmobile_smp_init_fallback_ops(void); extern void shmobile_boot_apmu(void); extern void shmobile_boot_scu(void); extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, diff --git a/arch/arm/mach-shmobile/headsmp-apmu.S b/arch/arm/mach-shmobile/headsmp-apmu.S index d49ab194766a..fabe9cadd12e 100644 --- a/arch/arm/mach-shmobile/headsmp-apmu.S +++ b/arch/arm/mach-shmobile/headsmp-apmu.S @@ -1,19 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * SMP support for APMU based systems with Cortex A7/A15 * * Copyright (C) 2014 Renesas Electronics Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/linkage.h> #include <asm/assembler.h> -#ifdef CONFIG_SMP ENTRY(shmobile_boot_apmu) bl secure_cntvoff_init b secondary_startup ENDPROC(shmobile_boot_apmu) -#endif diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index ba732effc90b..96330ef25641 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SMP support for SoCs with APMU * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/cpu_pm.h> #include <linux/delay.h> @@ -23,7 +20,6 @@ #include <asm/smp_plat.h> #include <asm/suspend.h> #include "common.h" -#include "platsmp-apmu.h" #include "rcar-gen2.h" static struct { @@ -87,6 +83,104 @@ static int __maybe_unused apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu) return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL; } +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND) +/* nicked from arch/arm/mach-exynos/hotplug.c */ +static inline void cpu_enter_lowpower_a15(void) +{ + unsigned int v; + + asm volatile( + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "Ir" (CR_C) + : "cc"); + + flush_cache_louis(); + + asm volatile( + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (0x40) + : "cc"); + + isb(); + dsb(); +} + +static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) +{ + + /* Select next sleep mode using the APMU */ + apmu_wrap(cpu, apmu_power_off); + + /* Do ARM specific CPU shutdown */ + cpu_enter_lowpower_a15(); +} +#endif + +#if defined(CONFIG_HOTPLUG_CPU) +static void shmobile_smp_apmu_cpu_die(unsigned int cpu) +{ + /* For this particular CPU deregister boot vector */ + shmobile_smp_hook(cpu, 0, 0); + + /* Shutdown CPU core */ + shmobile_smp_apmu_cpu_shutdown(cpu); + + /* jump to shared mach-shmobile sleep / reset code */ + shmobile_smp_sleep(); +} + +static int shmobile_smp_apmu_cpu_kill(unsigned int cpu) +{ + return apmu_wrap(cpu, apmu_power_off_poll); +} +#endif + +#if defined(CONFIG_SUSPEND) +static int shmobile_smp_apmu_do_suspend(unsigned long cpu) +{ + shmobile_smp_hook(cpu, __pa_symbol(cpu_resume), 0); + shmobile_smp_apmu_cpu_shutdown(cpu); + cpu_do_idle(); /* WFI selects Core Standby */ + return 1; +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile("mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + +static int shmobile_smp_apmu_enter_suspend(suspend_state_t state) +{ + cpu_suspend(smp_processor_id(), shmobile_smp_apmu_do_suspend); + cpu_leave_lowpower(); + return 0; +} + +void __init shmobile_smp_apmu_suspend_init(void) +{ + shmobile_suspend_ops.enter = shmobile_smp_apmu_enter_suspend; +} +#endif + #ifdef CONFIG_SMP static void apmu_init_cpu(struct resource *res, int cpu, int bit) { @@ -106,38 +200,6 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit) writel(x, apmu_cpus[cpu].iomem + DBGRCR_OFFS); } -static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit), - struct rcar_apmu_config *apmu_config, int num) -{ - int id; - int k; - int bit, index; - bool is_allowed; - - for (k = 0; k < num; k++) { - /* only enable the cluster that includes the boot CPU */ - is_allowed = false; - for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) { - id = apmu_config[k].cpus[bit]; - if (id >= 0) { - if (id == cpu_logical_map(0)) - is_allowed = true; - } - } - if (!is_allowed) - continue; - - for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) { - id = apmu_config[k].cpus[bit]; - if (id >= 0) { - index = get_logical_index(id); - if (index >= 0) - fn(&apmu_config[k].iomem, index, bit); - } - } - } -} - static const struct of_device_id apmu_ids[] = { { .compatible = "renesas,apmu" }, { /*sentinel*/ } @@ -194,15 +256,8 @@ static void __init shmobile_smp_apmu_setup_boot(void) shmobile_boot_fn_gen2 = shmobile_boot_fn; } -void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, - struct rcar_apmu_config *apmu_config, - int num) -{ - shmobile_smp_apmu_setup_boot(); - apmu_parse_cfg(apmu_init_cpu, apmu_config, num); -} - -int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int shmobile_smp_apmu_boot_secondary(unsigned int cpu, + struct task_struct *idle) { /* For this particular CPU register boot vector */ shmobile_smp_hook(cpu, __pa_symbol(shmobile_boot_apmu), 0); @@ -229,101 +284,3 @@ static struct smp_operations apmu_smp_ops __initdata = { CPU_METHOD_OF_DECLARE(shmobile_smp_apmu, "renesas,apmu", &apmu_smp_ops); #endif /* CONFIG_SMP */ - -#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND) -/* nicked from arch/arm/mach-exynos/hotplug.c */ -static inline void cpu_enter_lowpower_a15(void) -{ - unsigned int v; - - asm volatile( - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "Ir" (CR_C) - : "cc"); - - flush_cache_louis(); - - asm volatile( - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (0x40) - : "cc"); - - isb(); - dsb(); -} - -static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) -{ - - /* Select next sleep mode using the APMU */ - apmu_wrap(cpu, apmu_power_off); - - /* Do ARM specific CPU shutdown */ - cpu_enter_lowpower_a15(); -} - -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile("mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} -#endif - -#if defined(CONFIG_HOTPLUG_CPU) -void shmobile_smp_apmu_cpu_die(unsigned int cpu) -{ - /* For this particular CPU deregister boot vector */ - shmobile_smp_hook(cpu, 0, 0); - - /* Shutdown CPU core */ - shmobile_smp_apmu_cpu_shutdown(cpu); - - /* jump to shared mach-shmobile sleep / reset code */ - shmobile_smp_sleep(); -} - -int shmobile_smp_apmu_cpu_kill(unsigned int cpu) -{ - return apmu_wrap(cpu, apmu_power_off_poll); -} -#endif - -#if defined(CONFIG_SUSPEND) -static int shmobile_smp_apmu_do_suspend(unsigned long cpu) -{ - shmobile_smp_hook(cpu, __pa_symbol(cpu_resume), 0); - shmobile_smp_apmu_cpu_shutdown(cpu); - cpu_do_idle(); /* WFI selects Core Standby */ - return 1; -} - -static int shmobile_smp_apmu_enter_suspend(suspend_state_t state) -{ - cpu_suspend(smp_processor_id(), shmobile_smp_apmu_do_suspend); - cpu_leave_lowpower(); - return 0; -} - -void __init shmobile_smp_apmu_suspend_init(void) -{ - shmobile_suspend_ops.enter = shmobile_smp_apmu_enter_suspend; -} -#endif diff --git a/arch/arm/mach-shmobile/platsmp-apmu.h b/arch/arm/mach-shmobile/platsmp-apmu.h deleted file mode 100644 index 76512c9a2545..000000000000 --- a/arch/arm/mach-shmobile/platsmp-apmu.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * rmobile apmu definition - * - * Copyright (C) 2014 Renesas Electronics Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef PLATSMP_APMU_H -#define PLATSMP_APMU_H - -struct rcar_apmu_config { - struct resource iomem; - int cpus[4]; -}; - -extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, - struct rcar_apmu_config *apmu_config, - int num); -extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu, - struct task_struct *idle); -extern void shmobile_smp_apmu_cpu_die(unsigned int cpu); -extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu); - -#endif /* PLATSMP_APMU_H */ diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 02e21bceb085..b23378f3d7e1 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -36,12 +36,3 @@ bool shmobile_smp_cpu_can_disable(unsigned int cpu) return true; /* Hotplug of any CPU is supported */ } #endif - -bool __init shmobile_smp_init_fallback_ops(void) -{ - /* fallback on PSCI/smp_ops if no other DT based method is detected */ - if (!IS_ENABLED(CONFIG_SMP)) - return false; - - return platform_can_secondary_boot() ? true : false; -} diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c deleted file mode 100644 index 5c9a93f5e650..000000000000 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * r8a7779 Power management support - * - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/soc/renesas/rcar-sysc.h> - -#include <asm/io.h> - -#include "r8a7779.h" - -/* SYSC */ -#define SYSCIER 0x0c -#define SYSCIMR 0x10 - -#if defined(CONFIG_PM) || defined(CONFIG_SMP) - -static void __init r8a7779_sysc_init(void) -{ - rcar_sysc_init(0xffd85000, 0x0131000e); -} - -#else /* CONFIG_PM || CONFIG_SMP */ - -static inline void r8a7779_sysc_init(void) {} - -#endif /* CONFIG_PM || CONFIG_SMP */ - -void __init r8a7779_pm_init(void) -{ - static int once; - - if (!once++) - r8a7779_sysc_init(); -} diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c index 5a798b406af0..345af3ebcc3a 100644 --- a/arch/arm/mach-shmobile/pm-rcar-gen2.c +++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c @@ -15,7 +15,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/smp.h> -#include <linux/soc/renesas/rcar-sysc.h> #include <asm/io.h> #include <asm/cputype.h> #include "common.h" @@ -46,23 +45,6 @@ static inline u32 phys_to_sbar(phys_addr_t addr) return (addr >> 8) & 0xfffffc00; } -/* SYSC */ -#define SYSCIER 0x0c -#define SYSCIMR 0x10 - -#if defined(CONFIG_SMP) - -static void __init rcar_gen2_sysc_init(u32 syscier) -{ - rcar_sysc_init(0xe6180000, syscier); -} - -#else /* CONFIG_SMP */ - -static inline void rcar_gen2_sysc_init(u32 syscier) {} - -#endif /* CONFIG_SMP */ - void __init rcar_gen2_pm_init(void) { void __iomem *p; @@ -72,7 +54,6 @@ void __init rcar_gen2_pm_init(void) bool has_a7 = false; bool has_a15 = false; struct resource res; - u32 syscier = 0; int error; if (once++) @@ -89,11 +70,6 @@ void __init rcar_gen2_pm_init(void) has_a7 = true; } - if (of_machine_is_compatible("renesas,r8a7790")) - syscier = 0x013111ef; - else if (of_machine_is_compatible("renesas,r8a7791")) - syscier = 0x00111003; - np = of_find_compatible_node(NULL, NULL, "renesas,smp-sram"); if (!np) { /* No smp-sram in DT, fall back to hardcoded address */ @@ -155,6 +131,5 @@ map: } iounmap(p); - rcar_gen2_sysc_init(syscier); shmobile_smp_apmu_suspend_init(); } diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h index 30668aa6acc3..ca9db8fde2f7 100644 --- a/arch/arm/mach-shmobile/r8a7779.h +++ b/arch/arm/mach-shmobile/r8a7779.h @@ -2,8 +2,6 @@ #ifndef __ASM_R8A7779_H__ #define __ASM_R8A7779_H__ -extern void r8a7779_pm_init(void); - extern const struct smp_operations r8a7779_smp_ops; #endif /* __ASM_R8A7779_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h deleted file mode 100644 index 669c8cd09e07..000000000000 --- a/arch/arm/mach-shmobile/r8a7790.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_R8A7790_H__ -#define __ASM_R8A7790_H__ - -extern const struct smp_operations r8a7790_smp_ops; - -#endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h deleted file mode 100644 index 8c794aace938..000000000000 --- a/arch/arm/mach-shmobile/r8a7791.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_R8A7791_H__ -#define __ASM_R8A7791_H__ - -extern const struct smp_operations r8a7791_smp_ops; - -#endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index 93f628acfd94..21ebc7678ffd 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * R-Car Generation 2 da9063/da9210 regulator quirk * @@ -16,15 +17,6 @@ * been initialized, but before the i2c slave drivers are initialized. * * Copyright (C) 2015 Glider bvba - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/device.h> diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 3c99aaf65325..a328d2f52678 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Emma Mobile EV2 processor support * * Copyright (C) 2012 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c index 319ca9508ec6..14867226f8f4 100644 --- a/arch/arm/mach-shmobile/setup-r7s72100.c +++ b/arch/arm/mach-shmobile/setup-r7s72100.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * r7s72100 processor support * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 20173c4f415d..23a29a0ea9c9 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * r8a73a4 processor support * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/init.h> @@ -26,7 +18,6 @@ static const char *const r8a73a4_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") - .init_early = shmobile_init_delay, .init_late = shmobile_init_late, .dt_compat = r8a73a4_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 3849eef0d3a7..787d039b5a07 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * R8A7740 processor support * * Copyright (C) 2011 Renesas Solutions Corp. * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 7fa4a0b5f654..ce51794f64c7 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -1,18 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * r8a7778 processor support * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/io.h> diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 0686112f2435..d589326099e0 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -1,18 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * r8a7779 processor support * * Copyright (C) 2011, 2013 Renesas Solutions Corp. * Copyright (C) 2011 Magnus Damm * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/init.h> #include <linux/irq.h> diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c deleted file mode 100644 index 78d3e859bd64..000000000000 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * r8a7790 processor support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "r8a7790.h" -#include "rcar-gen2.h" - -static const char * const r8a7790_boards_compat_dt[] __initconst = { - "renesas,r8a7790", - NULL, -}; - -DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") - .smp_init = smp_init_ops(shmobile_smp_init_fallback_ops), - .smp = smp_ops(r8a7790_smp_ops), - .init_early = shmobile_init_delay, - .init_time = rcar_gen2_timer_init, - .init_late = shmobile_init_late, - .reserve = rcar_gen2_reserve, - .dt_compat = r8a7790_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c deleted file mode 100644 index 26e2d181a190..000000000000 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * r8a7791 processor support - * - * Copyright (C) 2013 Renesas Electronics Corporation - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> - -#include <asm/mach/arch.h> - -#include "common.h" -#include "r8a7791.h" -#include "rcar-gen2.h" - -static const char *const r8a7791_boards_compat_dt[] __initconst = { - "renesas,r8a7791", - NULL, -}; - -DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") - .smp_init = smp_init_ops(shmobile_smp_init_fallback_ops), - .smp = smp_ops(r8a7791_smp_ops), - .init_early = shmobile_init_delay, - .init_time = rcar_gen2_timer_init, - .init_late = shmobile_init_late, - .reserve = rcar_gen2_reserve, - .dt_compat = r8a7791_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 88fdc1801d90..013acc97795c 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -1,18 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * R-Car Generation 2 support * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Magnus Damm * Copyright (C) 2014 Ulrich Hecht - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/clk-provider.h> @@ -67,7 +59,6 @@ static unsigned int __init get_extal_freq(void) void __init rcar_gen2_timer_init(void) { -#ifdef CONFIG_ARM_ARCH_TIMER void __iomem *base; u32 freq; @@ -109,7 +100,6 @@ void __init rcar_gen2_timer_init(void) } iounmap(base); -#endif /* CONFIG_ARM_ARCH_TIMER */ of_clk_init(NULL); timer_probe(); @@ -186,10 +176,8 @@ void __init rcar_gen2_reserve(void) } static const char * const rcar_gen2_boards_compat_dt[] __initconst = { - /* - * R8A7790 and R8A7791 can't be handled here as long as they need SMP - * initialization fallback. - */ + "renesas,r8a7790", + "renesas,r8a7791", "renesas,r8a7792", "renesas,r8a7793", "renesas,r8a7794", @@ -197,7 +185,6 @@ static const char * const rcar_gen2_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(RCAR_GEN2_DT, "Generic R-Car Gen2 (Flattened Device Tree)") - .init_early = shmobile_init_delay, .init_late = shmobile_init_late, .init_time = rcar_gen2_timer_init, .reserve = rcar_gen2_reserve, @@ -212,7 +199,6 @@ static const char * const rz_g1_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(RZ_G1_DT, "Generic RZ/G1 (Flattened Device Tree)") - .init_early = shmobile_init_delay, .init_late = shmobile_init_late, .init_time = rcar_gen2_timer_init, .reserve = rcar_gen2_reserve, diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index a25ff188e403..cc08aa752244 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -1,18 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * sh73a0 processor support * * Copyright (C) 2010 Takashi Yoshii * Copyright (C) 2010 Magnus Damm * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 3a732199cf5e..3853ecea44ca 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SMP support for Emma Mobile EV2 * * Copyright (C) 2012 Renesas Solutions Corp. * Copyright (C) 2012 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index c6951ee24588..0ed73b650c14 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SMP support for R-Mobile / SH-Mobile - r8a7779 portion * * Copyright (C) 2011 Renesas Solutions Corp. * Copyright (C) 2011 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/kernel.h> #include <linux/init.h> @@ -31,59 +23,13 @@ #define AVECR IOMEM(0xfe700040) #define R8A7779_SCU_BASE 0xf0000000 -static const struct rcar_sysc_ch r8a7779_ch_cpu1 = { - .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ - .chan_bit = 1, /* ARM1 */ - .isr_bit = 1, /* ARM1 */ -}; - -static const struct rcar_sysc_ch r8a7779_ch_cpu2 = { - .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ - .chan_bit = 2, /* ARM2 */ - .isr_bit = 2, /* ARM2 */ -}; - -static const struct rcar_sysc_ch r8a7779_ch_cpu3 = { - .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ - .chan_bit = 3, /* ARM3 */ - .isr_bit = 3, /* ARM3 */ -}; - -static const struct rcar_sysc_ch * const r8a7779_ch_cpu[4] = { - [1] = &r8a7779_ch_cpu1, - [2] = &r8a7779_ch_cpu2, - [3] = &r8a7779_ch_cpu3, -}; - -static int r8a7779_platform_cpu_kill(unsigned int cpu) +static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { - const struct rcar_sysc_ch *ch = NULL; int ret = -EIO; cpu = cpu_logical_map(cpu); - - if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) - ch = r8a7779_ch_cpu[cpu]; - - if (ch) - ret = rcar_sysc_power_down(ch); - - return ret ? ret : 1; -} - -static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - const struct rcar_sysc_ch *ch = NULL; - unsigned int lcpu = cpu_logical_map(cpu); - int ret; - - if (lcpu < ARRAY_SIZE(r8a7779_ch_cpu)) - ch = r8a7779_ch_cpu[lcpu]; - - if (ch) - ret = rcar_sysc_power_up(ch); - else - ret = -EIO; + if (cpu) + ret = rcar_sysc_power_up_cpu(cpu); return ret; } @@ -95,16 +41,20 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) /* setup r8a7779 specific SCU bits */ shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus); +} - r8a7779_pm_init(); +#ifdef CONFIG_HOTPLUG_CPU +static int r8a7779_platform_cpu_kill(unsigned int cpu) +{ + int ret = -EIO; - /* power off secondary CPUs */ - r8a7779_platform_cpu_kill(1); - r8a7779_platform_cpu_kill(2); - r8a7779_platform_cpu_kill(3); + cpu = cpu_logical_map(cpu); + if (cpu) + ret = rcar_sysc_power_down_cpu(cpu); + + return ret ? ret : 1; } -#ifdef CONFIG_HOTPLUG_CPU static int r8a7779_cpu_kill(unsigned int cpu) { if (shmobile_smp_scu_cpu_kill(cpu)) diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c deleted file mode 100644 index 28f26d5362d8..000000000000 --- a/arch/arm/mach-shmobile/smp-r8a7790.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * SMP support for r8a7790 - * - * Copyright (C) 2012-2013 Renesas Solutions Corp. - * Copyright (C) 2012 Takashi Yoshii <takashi.yoshii.ze@renesas.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/io.h> -#include <linux/soc/renesas/rcar-sysc.h> - -#include <asm/smp_plat.h> - -#include "common.h" -#include "platsmp-apmu.h" -#include "rcar-gen2.h" -#include "r8a7790.h" - -static const struct rcar_sysc_ch r8a7790_ca15_scu = { - .chan_offs = 0x180, /* PWRSR5 .. PWRER5 */ - .isr_bit = 12, /* CA15-SCU */ -}; - -static const struct rcar_sysc_ch r8a7790_ca7_scu = { - .chan_offs = 0x100, /* PWRSR3 .. PWRER3 */ - .isr_bit = 21, /* CA7-SCU */ -}; - -static struct rcar_apmu_config r8a7790_apmu_config[] = { - { - .iomem = DEFINE_RES_MEM(0xe6152000, 0x188), - .cpus = { 0, 1, 2, 3 }, - }, - { - .iomem = DEFINE_RES_MEM(0xe6151000, 0x188), - .cpus = { 0x100, 0x0101, 0x102, 0x103 }, - } -}; - -static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) -{ - /* let APMU code install data related to shmobile_boot_vector */ - shmobile_smp_apmu_prepare_cpus(max_cpus, - r8a7790_apmu_config, - ARRAY_SIZE(r8a7790_apmu_config)); - - /* turn on power to SCU */ - rcar_gen2_pm_init(); - rcar_sysc_power_up(&r8a7790_ca15_scu); - rcar_sysc_power_up(&r8a7790_ca7_scu); -} - -const struct smp_operations r8a7790_smp_ops __initconst = { - .smp_prepare_cpus = r8a7790_smp_prepare_cpus, - .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_can_disable = shmobile_smp_cpu_can_disable, - .cpu_die = shmobile_smp_apmu_cpu_die, - .cpu_kill = shmobile_smp_apmu_cpu_kill, -#endif -}; diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c deleted file mode 100644 index 2948c22cfc53..000000000000 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * SMP support for r8a7791 - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/io.h> - -#include <asm/smp_plat.h> - -#include "common.h" -#include "platsmp-apmu.h" -#include "r8a7791.h" -#include "rcar-gen2.h" - -static struct rcar_apmu_config r8a7791_apmu_config[] = { - { - .iomem = DEFINE_RES_MEM(0xe6152000, 0x188), - .cpus = { 0, 1 }, - } -}; - -static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) -{ - /* let APMU code install data related to shmobile_boot_vector */ - shmobile_smp_apmu_prepare_cpus(max_cpus, - r8a7791_apmu_config, - ARRAY_SIZE(r8a7791_apmu_config)); - - rcar_gen2_pm_init(); -} - -const struct smp_operations r8a7791_smp_ops __initconst = { - .smp_prepare_cpus = r8a7791_smp_prepare_cpus, - .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_can_disable = shmobile_smp_cpu_can_disable, - .cpu_die = shmobile_smp_apmu_cpu_die, - .cpu_kill = shmobile_smp_apmu_cpu_kill, -#endif -}; diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 6196a6380385..828e8aea037e 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -32,14 +32,6 @@ void __init shmobile_init_delay(void) for_each_child_of_node(cpus, np) { u32 freq; - if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER) && - (of_device_is_compatible(np, "arm,cortex-a7") || - of_device_is_compatible(np, "arm,cortex-a15"))) { - of_node_put(np); - of_node_put(cpus); - return; - } - if (!of_property_read_u32(np, "clock-frequency", &freq)) max_freq = max(max_freq, freq); } diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 779235a9147d..e661d2626675 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -9,6 +9,7 @@ config ARCH_UNIPHIER select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP select PINCTRL + select RESET_CONTROLLER help Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-uniphier/Makefile +++ /dev/null diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index d5aeac351fc3..35f2e6e1be23 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -71,6 +71,13 @@ config ARCH_EXYNOS help This enables support for ARMv8 based Samsung Exynos SoC family. +config ARCH_K3 + bool "Texas Instruments Inc. K3 multicore SoC architecture" + select PM_GENERIC_DOMAINS if PM + help + This enables support for Texas Instruments' K3 multicore SoC + architecture. + config ARCH_LAYERSCAPE bool "ARMv8 based Freescale Layerscape SoC family" select EDAC_SUPPORT @@ -261,6 +268,7 @@ config ARCH_UNIPHIER bool "Socionext UniPhier SoC Family" select ARCH_HAS_RESET_CONTROLLER select PINCTRL + select RESET_CONTROLLER help This enables support for Socionext UniPhier SoC family. diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 3543bc324553..4690364d584b 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -23,5 +23,6 @@ subdir-y += rockchip subdir-y += socionext subdir-y += sprd subdir-y += synaptics +subdir-y += ti subdir-y += xilinx subdir-y += zte diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index c31f90a49481..9ffa7a038791 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -1,9 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts new file mode 100644 index 000000000000..eac4793c8502 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Amarula A64-Relic"; + compatible = "amarula,a64-relic", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dcdc1>; + /* + * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but + * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with + * 0Ohm register to vcc-io-wifi so eldo1 is used. + */ + vqmmc-supply = <®_eldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* WL-WAKE-AP: PL3 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ + }; +}; + +#include "axp803.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi-dsi-sensor"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-mipi"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "dovdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus-supply = <®_drivevbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 0716b1441187..094cfed13df9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -296,6 +296,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index e2dce48fa29a..98dbff19f5cc 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -195,6 +195,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 3b3081b10ecb..3f531393eaee 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -214,6 +214,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index bf42690a3361..1221764f5719 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -191,6 +191,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index a75825798a71..1b9b92e541d2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -229,6 +229,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + /* On Euler connector */ &spdif { status = "disabled"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts new file mode 100644 index 000000000000..897e60cbe38d --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> + * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com> + * + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Pinebook"; + compatible = "pine64,pinebook", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + ethernet0 = &rtl8723cs; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 0>; + brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; + default-brightness-level = <2>; + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + + framebuffer-lcd { + panel-supply = <®_dc1sw>; + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_fldo1>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + lid_switch { + label = "Lid Switch"; + gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */ + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; +}; + +&ehci0 { + phys = <&usbphy 0>; + phy-names = "usb"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo4>; + vqmmc-supply = <®_eldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723cs: wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_eldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + status = "okay"; +}; + +&ohci0 { + phys = <&usbphy 0>; + phy-names = "usb"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* The ANX6345 eDP-bridge is on r_i2c */ +&r_i2c { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins_a>; + status = "okay"; +}; + +#include "axp803.dtsi" + +®_aldo1 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-csi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi"; +}; + +®_dldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-edp"; +}; + +®_dldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-1v8-csi"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_ldo_io0 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; +}; + +&usbphy { + usb0_vbus-supply = <®_ldo_io0>; + usb1_vbus-supply = <®_ldo_io0>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index abe179de35d7..c21f2331add6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -134,6 +134,10 @@ regulator-name = "vcc-wifi"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index 43418bd881d8..6723b8695e0b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -45,6 +45,8 @@ #include "sun50i-a64.dtsi" +#include <dt-bindings/gpio/gpio.h> + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -52,6 +54,7 @@ non-removable; disable-wp; bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; @@ -66,6 +69,18 @@ }; }; +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + #include "axp803.dtsi" ®_aldo2 { diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index d9baab3dc96b..81f8e0098699 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -38,6 +38,7 @@ gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ linux,input-type = <EV_SW>; linux,code = <SW_LID>; + wakeup-source; }; }; @@ -210,7 +211,7 @@ ®_dldo3 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-name = "eDP12"; + regulator-name = "vdd-edp"; }; ®_dldo4 { @@ -253,6 +254,10 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 1b2ef28c42bd..d3daf90a8715 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -43,9 +43,12 @@ */ #include <dt-bindings/clock/sun50i-a64-ccu.h> +#include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/sun50i-a64-ccu.h> +#include <dt-bindings/reset/sun8i-de2.h> +#include <dt-bindings/reset/sun8i-r-ccu.h> / { interrupt-parent = <&gic>; @@ -57,17 +60,21 @@ #size-cells = <1>; ranges; -/* - * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU. - * However there is no support for this clock on A64 yet, so we depend - * on the upstream clocks here to keep them (and thus CLK_MIXER0) up. - */ simplefb_lcd: framebuffer-lcd { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "mixer0-lcd0"; clocks = <&ccu CLK_TCON0>, - <&ccu CLK_DE>, <&ccu CLK_BUS_DE>; + <&display_clocks CLK_MIXER0>; + status = "disabled"; + }; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "mixer1-lcd1-hdmi"; + clocks = <&display_clocks CLK_MIXER1>, + <&ccu CLK_TCON1>, <&ccu CLK_HDMI>; status = "disabled"; }; }; @@ -168,10 +175,46 @@ #size-cells = <1>; ranges; + de2@1000000 { + compatible = "allwinner,sun50i-a64-de2"; + reg = <0x1000000 0x400000>; + allwinner,sram = <&de2_sram 1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000000 0x400000>; + + display_clocks: clock@0 { + compatible = "allwinner,sun50i-a64-de2-clk"; + reg = <0x0 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + syscon: syscon@1c00000 { - compatible = "allwinner,sun50i-a64-system-controller", - "syscon"; + compatible = "allwinner,sun50i-a64-system-control"; reg = <0x01c00000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@18000 { + compatible = "mmio-sram"; + reg = <0x00018000 0x28000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00018000 0x28000>; + + de2_sram: sram-section@0 { + compatible = "allwinner,sun50i-a64-sram-c"; + reg = <0x0000 0x28000>; + }; + }; }; dma: dma-controller@1c02000 { @@ -364,6 +407,11 @@ bias-pull-up; }; + pwm_pin: pwm_pin { + pins = "PD22"; + function = "pwm"; + }; + rmii_pins: rmii_pins { pins = "PD10", "PD11", "PD13", "PD14", "PD17", "PD18", "PD19", "PD20", "PD22", "PD23"; @@ -608,8 +656,6 @@ clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; mdio: mdio { compatible = "snps,dwmac-mdio"; @@ -629,11 +675,25 @@ #interrupt-cells = <3>; }; + pwm: pwm@1c21400 { + compatible = "allwinner,sun50i-a64-pwm", + "allwinner,sun5i-a13-pwm"; + reg = <0x01c21400 0x400>; + clocks = <&osc24M>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "rtc-osc32k", "rtc-osc32k-out"; + clocks = <&osc32k>; + #clock-cells = <1>; }; r_intc: interrupt-controller@1f00c00 { @@ -655,6 +715,29 @@ #reset-cells = <1>; }; + r_i2c: i2c@1f02400 { + compatible = "allwinner,sun50i-a64-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01f02400 0x400>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_APB0_I2C>; + resets = <&r_ccu RST_APB0_I2C>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + r_pwm: pwm@1f03800 { + compatible = "allwinner,sun50i-a64-pwm", + "allwinner,sun5i-a13-pwm"; + reg = <0x01f03800 0x400>; + clocks = <&osc24M>; + pinctrl-names = "default"; + pinctrl-0 = <&r_pwm_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun50i-a64-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -666,6 +749,16 @@ interrupt-controller; #interrupt-cells = <3>; + r_i2c_pins_a: i2c-a { + pins = "PL8", "PL9"; + function = "s_i2c"; + }; + + r_pwm_pin: pwm { + pins = "PL10"; + function = "s_pwm"; + }; + r_rsb_pins: rsb { pins = "PL0", "PL1"; function = "s_rsb"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 98862c7c7258..3e0d5a9c096d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -207,6 +207,18 @@ status = "okay"; }; +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index b6f2d6b2ecae..ceffc40810ee 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -20,11 +20,157 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + label = "pine-h64:green:heartbeat"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; + + link { + label = "pine-h64:white:link"; + gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */ + }; + + status { + label = "pine-h64:blue:status"; + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_cldo1>; + vqmmc-supply = <®_bldo2>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; }; &r_i2c { status = "okay"; + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ac200"; + }; + + reg_aldo3: aldo3 { + /* This regulator is connected with CLDO1 */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-1"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-io"; + }; + + reg_bldo3: bldo3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dcxoio"; + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + /* This regulator is connected with ALDO3 */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-2"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index c72da8cd9ef5..cfa5fffcf62b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -5,7 +5,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun50i-h6-ccu.h> +#include <dt-bindings/clock/sun50i-h6-r-ccu.h> #include <dt-bindings/reset/sun50i-h6-ccu.h> +#include <dt-bindings/reset/sun50i-h6-r-ccu.h> / { interrupt-parent = <&gic>; @@ -124,12 +126,71 @@ interrupt-controller; #interrupt-cells = <3>; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC1", "PC4", "PC5", "PC6", + "PC7", "PC8", "PC9", "PC10", + "PC11", "PC12", "PC13", "PC14"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + uart0_ph_pins: uart0-ph { pins = "PH0", "PH1"; function = "uart0"; }; }; + mmc0: mmc@4020000 { + compatible = "allwinner,sun50i-h6-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x04020000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@4021000 { + compatible = "allwinner,sun50i-h6-mmc", + "allwinner,sun50i-a64-mmc"; + reg = <0x04021000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@4022000 { + compatible = "allwinner,sun50i-h6-emmc", + "allwinner,sun50i-a64-emmc"; + reg = <0x04022000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + uart0: serial@5000000 { compatible = "snps,dw-apb-uart"; reg = <0x05000000 0x400>; @@ -198,7 +259,7 @@ reg = <0x07022000 0x400>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu 2>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -215,8 +276,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07081400 0x400>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu 8>; - resets = <&r_ccu 4>; + clocks = <&r_ccu CLK_R_APB2_I2C>; + resets = <&r_ccu RST_R_APB2_I2C>; pinctrl-names = "default"; pinctrl-0 = <&r_i2c_pins>; status = "disabled"; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 67dac595dc72..d033da401c26 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -119,6 +119,12 @@ #clock-cells = <0>; compatible = "fixed-clock"; }; + + qspi_clk: qspi-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; }; gmac0: ethernet@ff800000 { @@ -127,8 +133,8 @@ interrupts = <0 90 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; - resets = <&rst EMAC0_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC0_CLK>; clock-names = "stmmaceth"; status = "disabled"; @@ -140,8 +146,8 @@ interrupts = <0 91 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; - resets = <&rst EMAC1_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC1_CLK>; clock-names = "stmmaceth"; status = "disabled"; @@ -153,8 +159,8 @@ interrupts = <0 92 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; - resets = <&rst EMAC2_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; clocks = <&clkmgr STRATIX10_EMAC2_CLK>; clock-names = "stmmaceth"; status = "disabled"; @@ -310,6 +316,7 @@ resets = <&rst SPIM0_RESET>; reg-io-width = <4>; num-cs = <4>; + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; status = "disabled"; }; @@ -322,6 +329,7 @@ resets = <&rst SPIM1_RESET>; reg-io-width = <4>; num-cs = <4>; + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; status = "disabled"; }; @@ -407,6 +415,7 @@ phy-names = "usb2-phy"; resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; + clocks = <&clkmgr STRATIX10_USB_CLK>; status = "disabled"; }; @@ -418,6 +427,7 @@ phy-names = "usb2-phy"; resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; + clocks = <&clkmgr STRATIX10_USB_CLK>; status = "disabled"; }; @@ -426,6 +436,7 @@ reg = <0xffd00200 0x100>; interrupts = <0 117 4>; resets = <&rst WATCHDOG0_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -434,6 +445,7 @@ reg = <0xffd00300 0x100>; interrupts = <0 118 4>; resets = <&rst WATCHDOG1_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -442,6 +454,7 @@ reg = <0xffd00400 0x100>; interrupts = <0 125 4>; resets = <&rst WATCHDOG2_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -450,6 +463,7 @@ reg = <0xffd00500 0x100>; interrupts = <0 126 4>; resets = <&rst WATCHDOG3_RESET>; + clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -464,5 +478,20 @@ interrupts = <16 4>, <48 4>; }; }; + + qspi: spi@ff8d2000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff8d2000 0x100>, + <0xff900000 0x100000>; + interrupts = <0 3 4>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + clocks = <&qspi_clk>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index f9b1ef12db48..6edc4fa9fd42 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -147,3 +147,38 @@ reg = <0x68>; }; }; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00a"; + reg = <0>; + spi-max-frequency = <50000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x4000000>; + }; + + qspi_rootfs: partition@4000000 { + label = "Root Filesystem - JFFS2"; + reg = <0x4000000 0x4000000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 34dd0e9b5cbb..a97c0e2d7bc6 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -17,6 +17,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index dff9b15eb3c0..d5c01427a5ca 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -6,21 +6,75 @@ /dts-v1/; #include "meson-axg.dtsi" +#include <dt-bindings/input/input.h> / { compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg"; model = "Amlogic Meson AXG S400 Development Board"; + adc_keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-next { + label = "Next"; + linux,code = <KEY_NEXT>; + press-threshold-microvolt = <1116000>; /* 62% */ + }; + + button-prev { + label = "Previous"; + linux,code = <KEY_PREVIOUS>; + press-threshold-microvolt = <900000>; /* 50% */ + }; + + button-wifi { + label = "Wifi"; + linux,code = <KEY_WLAN>; + press-threshold-microvolt = <684000>; /* 38% */ + }; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <468000>; /* 26% */ + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <252000>; /* 14% */ + }; + + button-voice { + label = "Voice"; + linux,code = <KEY_VOICECOMMAND>; + press-threshold-microvolt = <0>; /* 0% */ + }; + }; + aliases { serial0 = &uart_AO; serial1 = &uart_A; }; + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; }; vddao_3v3: regulator-vddao_3v3 { @@ -28,6 +82,8 @@ regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; }; vddio_ao18: regulator-vddio_ao18 { @@ -35,6 +91,8 @@ regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; }; vcc_3v3: regulator-vcc_3v3 { @@ -42,6 +100,30 @@ regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + enable-active-high; }; emmc_pwrseq: emmc-pwrseq { @@ -62,6 +144,66 @@ clock-frequency = <32768>; pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ }; + + speaker-leds { + compatible = "gpio-leds"; + + aled1 { + label = "speaker:aled1"; + gpios = <&gpio_speaker 7 0>; + }; + + aled2 { + label = "speaker:aled2"; + gpios = <&gpio_speaker 6 0>; + }; + + aled3 { + label = "speaker:aled3"; + gpios = <&gpio_speaker 5 0>; + }; + + aled4 { + label = "speaker:aled4"; + gpios = <&gpio_speaker 4 0>; + }; + + aled5 { + label = "speaker:aled5"; + gpios = <&gpio_speaker 3 0>; + }; + + aled6 { + label = "speaker:aled6"; + gpios = <&gpio_speaker 2 0>; + }; + }; + + linein: audio-codec@0 { + #sound-dai-cells = <0>; + compatible = "everest,es7241"; + VDDA-supply = <&vcc_3v3>; + VDDP-supply = <&vcc_3v3>; + VDDD-supply = <&vcc_3v3>; + status = "okay"; + sound-name-prefix = "Linein"; + }; + + lineout: audio-codec@1 { + #sound-dai-cells = <0>; + compatible = "everest,es7154"; + VDD-supply = <&vcc_3v3>; + PVDD-supply = <&vcc_5v>; + status = "okay"; + sound-name-prefix = "Lineout"; + }; + + spdif_dit: audio-codec@2 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; }; ðmac { @@ -106,12 +248,33 @@ status = "okay"; pinctrl-0 = <&i2c1_z_pins>; pinctrl-names = "default"; + + speaker_amp1: audio-codec@1b { + compatible = "ti,tas5707"; + reg = <0x1b>; + reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + AVDD-supply = <&vcc_3v3>; + DVDD-supply = <&vcc_3v3>; + PVDD_A-supply = <&main_12v>; + PVDD_B-supply = <&main_12v>; + PVDD_C-supply = <&main_12v>; + PVDD_D-supply = <&main_12v>; + }; }; &i2c_AO { status = "okay"; pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; pinctrl-names = "default"; + + gpio_speaker: gpio-controller@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vddao_3v3>; + }; }; &pwm_ab { @@ -166,3 +329,8 @@ compatible = "brcm,bcm4329-fmac"; }; }; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 67d7115e4eff..c518130e5ce7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/axg-clkc.h> #include <dt-bindings/clock/axg-aoclkc.h> #include <dt-bindings/gpio/meson-axg-gpio.h> @@ -91,6 +92,39 @@ method = "smc"; }; + tdmif_a: audio-controller@0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller@1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller@2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -155,6 +189,157 @@ }; }; + audio: bus@ff642000 { + compatible = "simple-bus"; + reg = <0x0 0xff642000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + }; + cbus: bus@ffd00000 { compatible = "simple-bus"; reg = <0x0 0xffd00000 0x0 0x25000>; @@ -477,6 +662,48 @@ }; }; + pdm_dclk_a14_pins: pdm_dclk_a14 { + mux { + groups = "pdm_dclk_a14"; + function = "pdm"; + }; + }; + + pdm_dclk_a19_pins: pdm_dclk_a19 { + mux { + groups = "pdm_dclk_a19"; + function = "pdm"; + }; + }; + + pdm_din0_pins: pdm_din0 { + mux { + groups = "pdm_din0"; + function = "pdm"; + }; + }; + + pdm_din1_pins: pdm_din1 { + mux { + groups = "pdm_din1"; + function = "pdm"; + }; + }; + + pdm_din2_pins: pdm_din2 { + mux { + groups = "pdm_din2"; + function = "pdm"; + }; + }; + + pdm_din3_pins: pdm_din3 { + mux { + groups = "pdm_din3"; + function = "pdm"; + }; + }; + pwm_a_a_pins: pwm_a_a { mux { groups = "pwm_a_a"; @@ -561,6 +788,76 @@ }; }; + spdif_in_z_pins: spdif_in_z { + mux { + groups = "spdif_in_z"; + function = "spdif_in"; + }; + }; + + spdif_in_a1_pins: spdif_in_a1 { + mux { + groups = "spdif_in_a1"; + function = "spdif_in"; + }; + }; + + spdif_in_a7_pins: spdif_in_a7 { + mux { + groups = "spdif_in_a7"; + function = "spdif_in"; + }; + }; + + spdif_in_a19_pins: spdif_in_a19 { + mux { + groups = "spdif_in_a19"; + function = "spdif_in"; + }; + }; + + spdif_in_a20_pins: spdif_in_a20 { + mux { + groups = "spdif_in_a20"; + function = "spdif_in"; + }; + }; + + spdif_out_z_pins: spdif_out_z { + mux { + groups = "spdif_out_z"; + function = "spdif_out"; + }; + }; + + spdif_out_a1_pins: spdif_out_a1 { + mux { + groups = "spdif_out_a1"; + function = "spdif_out"; + }; + }; + + spdif_out_a11_pins: spdif_out_a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + }; + }; + + spdif_out_a19_pins: spdif_out_a19 { + mux { + groups = "spdif_out_a19"; + function = "spdif_out"; + }; + }; + + spdif_out_a20_pins: spdif_out_a20 { + mux { + groups = "spdif_out_a20"; + function = "spdif_out"; + }; + }; + spi0_pins: spi0 { mux { groups = "spi0_miso", @@ -1194,6 +1491,20 @@ interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; + + saradc: adc@9000 { + compatible = "amlogic,meson-axg-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x9000 0x0 0x38>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 88e712ea757a..765247bc4f24 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -35,6 +35,13 @@ regulator-always-on; }; + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; @@ -140,6 +147,11 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; @@ -160,11 +172,6 @@ vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; }; /* SD card */ diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 7d5709c37e95..cbe99bd4e06d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -106,6 +106,42 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + /* CVBS is available on CON1 pin 36, disabled by default */ + cvbs-connector { + compatible = "composite-video-connector"; + status = "disabled"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; }; ðmac { @@ -137,6 +173,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts new file mode 100644 index 000000000000..70433e023fda --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S805X) P241 Development Board"; + + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x20000000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + status = "okay"; +}; + +&internal_phy { + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index a9f9bb90a877..15014faa2ab2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -41,13 +41,6 @@ }; }; - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -108,7 +101,9 @@ }; }; -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts index 80a231476b80..92c425d0259c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts @@ -19,3 +19,10 @@ phy-mode = "rmii"; phy-handle = <&internal_phy>; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts new file mode 100644 index 000000000000..6509c4950950 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * Based on meson-gxl-s905d-p231.dts: + * - Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "amlogic,p281", "amlogic,s905w", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S905W) P281 Development Board"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts new file mode 100644 index 000000000000..789c819c99c4 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * Based on meson-gxl-s905d-p231.dts: + * - Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl"; + model = "Oranth Tanix TX3 Mini"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */ + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 0868da476e41..313f88f8759e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -209,10 +209,34 @@ #cooling-cells = <2>; }; +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; + &cpu4 { #cooling-cells = <2>; }; +&cpu5 { + #cooling-cells = <2>; +}; + +&cpu6 { + #cooling-cells = <2>; +}; + +&cpu7 { + #cooling-cells = <2>; +}; + ðmac { pinctrl-0 = <ð_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 101417298a1d..73d656e4aade 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -40,13 +40,6 @@ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; }; }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; }; /* Q200 has exclusive choice between internal or external PHY */ @@ -79,7 +72,9 @@ }; }; -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts index 8d132b17514a..d02b80d77378 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts @@ -19,3 +19,10 @@ phy-mode = "rmii"; phy-handle = <&internal_phy>; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile index c4d06cffcb11..20c7d0aa6cb7 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/Makefile +++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile @@ -1,3 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb + +dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958802a802x.dtb diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi index 8862ec907fd8..bc299c3d9068 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -30,20 +30,9 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "stingray.dtsi" +#include "stingray-board-base.dtsi" / { - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - serial0 = &uart1; - serial1 = &uart0; - serial2 = &uart2; - serial3 = &uart3; - }; - sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl { compatible = "regulator-gpio"; regulator-name = "sdio0_vddo_ctrl_reg"; @@ -67,11 +56,6 @@ }; }; -&memory { /* Default DRAM banks */ - reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ - <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ -}; - &sata0 { status = "okay"; }; @@ -136,18 +120,6 @@ status = "okay"; }; -&mdio_mux_iproc { - mdio@10 { - gphy0: eth-phy@10 { - reg = <0x10>; - }; - }; -}; - -&uart1 { - status = "okay"; -}; - &pwm { status = "okay"; }; @@ -175,8 +147,6 @@ }; &enet { - phy-mode = "rgmii-id"; - phy-handle = <&gphy0>; status = "okay"; }; @@ -197,13 +167,10 @@ &sdio0 { vqmmc-supply = <&sdio0_vddo_ctrl_reg>; - non-removable; - full-pwr-cycle; status = "okay"; }; &sdio1 { vqmmc-supply = <&sdio1_vddo_ctrl_reg>; - full-pwr-cycle; status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts new file mode 100644 index 000000000000..a41facd7d79b --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + *Copyright(c) 2018 Broadcom + */ + +/dts-v1/; + +#include "stingray-board-base.dtsi" + +/ { + compatible = "brcm,bcm958802a802x", "brcm,stingray"; + model = "Stingray PS225xx (BCM958802A802x)"; +}; + +&enet { + status = "disabled"; +}; + +&sdio0 { + no-1-8-v; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi new file mode 100644 index 000000000000..82a24711d0d8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + * Copyright(c) 2016-2018 Broadcom + */ + +#include "stingray.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart0; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&memory { /* Default DRAM banks */ + reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ + <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ +}; + +&enet { + phy-mode = "rgmii-id"; + phy-handle = <&gphy0>; +}; + +&uart1 { + status = "okay"; +}; + +&sdio0 { + non-removable; + full-pwr-cycle; +}; + +&sdio1 { + full-pwr-cycle; +}; + +&mdio_mux_iproc { + mdio@10 { + gphy0: eth-phy@10 { + reg = <0x10>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi index 3a4d4524b5ed..10a106aca229 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi @@ -52,12 +52,24 @@ reg = <0x0001d104 0x32>, <0x0001c854 0x4>; clocks = <&osc>; - clock-output-names = "genpll0", "clk_125", "clk_scr", + clock-output-names = "genpll0", "clk_125m", "clk_scr", "clk_250", "clk_pcie_axi", "clk_paxc_axi_x2", "clk_paxc_axi"; }; + genpll2: genpll2@1d1ac { + #clock-cells = <1>; + compatible = "brcm,sr-genpll2"; + reg = <0x0001d1ac 0x32>, + <0x0001c854 0x4>; + clocks = <&osc>; + clock-output-names = "genpll2", "clk_nic", + "clk_ts_500_ref", "clk_125_nitro", + "clk_chimp", "clk_nic_flash", + "clk_fs"; + }; + genpll3: genpll3@1d1e0 { #clock-cells = <1>; compatible = "brcm,sr-genpll3"; @@ -75,8 +87,8 @@ <0x0001c854 0x4>; clocks = <&osc>; clock-output-names = "genpll4", "clk_ccn", - "clk_tpiu_pll", "noc_clk", - "pll_chclk_fs4", + "clk_tpiu_pll", "clk_noc", + "clk_chclk_fs4", "clk_bridge_fscpu"; }; @@ -86,8 +98,8 @@ reg = <0x0001d248 0x32>, <0x0001c870 0x4>; clocks = <&osc>; - clock-output-names = "genpll5", "fs4_hf_clk", - "crypto_ae_clk", "raid_ae_clk"; + clock-output-names = "genpll5", "clk_fs4_hf", + "clk_crypto_ae", "clk_raid_ae"; }; lcpll0: lcpll0@1d0c4 { @@ -107,9 +119,9 @@ reg = <0x0001d138 0x3c>, <0x0001c870 0x4>; clocks = <&osc>; - clock-output-names = "lcpll1", "clk_wanpn", + clock-output-names = "lcpll1", "clk_wan", "clk_usb_ref", - "timesync_evt_clk"; + "clk_crmu_ts"; }; hsls_clk: hsls_clk { diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi new file mode 100644 index 000000000000..33a472ab17e8 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + *Copyright(c) 2018 Broadcom + */ + +pcie8: pcie@60400000 { + compatible = "brcm,iproc-pcie-paxc-v2"; + reg = <0 0x60400000 0 0x1000>; + linux,pci-domain = <8>; + + bus-range = <0x0 0x1>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x83000000 0 0x10000000 0 0x10000000 0 0x20000000>; + + dma-coherent; + + msi-map = <0x100 &gic_its 0x2000 0x1>, /* PF0 */ + <0x108 &gic_its 0x2040 0x8>, /* PF0-VF0-7 */ + <0x101 &gic_its 0x2080 0x1>, /* PF1 */ + <0x110 &gic_its 0x20c8 0x8>, /* PF1-VF8-15 */ + <0x102 &gic_its 0x2100 0x1>, /* PF2 */ + <0x118 &gic_its 0x2150 0x8>, /* PF2-VF16-23 */ + <0x103 &gic_its 0x2180 0x1>, /* PF3 */ + <0x120 &gic_its 0x21d8 0x8>, /* PF3-VF24-31 */ + <0x104 &gic_its 0x2200 0x1>, /* PF4 */ + <0x128 &gic_its 0x2260 0x8>, /* PF4-VF32-39 */ + <0x105 &gic_its 0x2280 0x1>, /* PF5 */ + <0x130 &gic_its 0x22e8 0x8>, /* PF5-VF40-47 */ + <0x106 &gic_its 0x2300 0x1>, /* PF6 */ + <0x138 &gic_its 0x2370 0x8>, /* PF6-VF48-55 */ + <0x107 &gic_its 0x2380 0x1>, /* PF7 */ + <0x140 &gic_its 0x23f8 0x8>; /* PF7-VF56-63 */ + + phys = <&pcie_phy 8>; + phy-names = "pcie-phy"; +}; + +pcie-ss { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40000000 0x800>; + + pcie_phy: phy@0 { + compatible = "brcm,sr-pcie-phy"; + reg = <0x0 0x200>; + brcm,sr-cdru = <&cdru>; + brcm,sr-mhb = <&mhb>; + #phy-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index a70e8ddbd66f..e283480bfc7e 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -146,6 +146,11 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; + scr { compatible = "simple-bus"; #address-cells = <1>; @@ -258,6 +263,18 @@ #include "stingray-clock.dtsi" + otp: otp@1c400 { + compatible = "brcm,ocotp-v2"; + reg = <0x0001c400 0x68>; + brcm,ocotp-size = <2048>; + status = "okay"; + }; + + cdru: syscon@1d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0x0001d000 0x400>; + }; + gpio_crmu: gpio@24800 { compatible = "brcm,iproc-gpio"; reg = <0x00024800 0x4c>; @@ -269,6 +286,7 @@ #include "stingray-fs4.dtsi" #include "stingray-sata.dtsi" + #include "stingray-pcie.dtsi" hsls { compatible = "simple-bus"; @@ -420,6 +438,7 @@ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>; clock-names = "wdogclk", "apb_pclk"; + timeout-sec = <60>; }; gpio_hsls: gpio@d0000 { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi deleted file mode 100644 index f0803575fd9f..000000000000 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos5433 TMU sensor configuration - * - * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <23>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <75>; -samsung,tmu_min_efuse_value = <40>; -samsung,tmu_max_efuse_value = <150>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_mux_addr = <6>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi deleted file mode 100644 index cccae662228a..000000000000 --- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos5433 TMU sensor configuration - * - * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <16>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <75>; -samsung,tmu_min_efuse_value = <40>; -samsung,tmu_max_efuse_value = <150>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 038c99792ccb..2131f12364cb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -630,7 +630,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, <&cmu_peris CLK_SCLK_TMU0>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -641,7 +641,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, <&cmu_peris CLK_SCLK_TMU0>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -652,7 +652,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, <&cmu_peris CLK_SCLK_TMU1>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-g3d-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -663,7 +663,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, <&cmu_peris CLK_SCLK_TMU1>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -674,7 +674,7 @@ clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, <&cmu_peris CLK_SCLK_TMU1>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos5433-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; @@ -1171,7 +1171,7 @@ power-domains = <&pd_gscl>; }; - sysmmu_scaler_0: sysmmu@0x15040000 { + sysmmu_scaler_0: sysmmu@15040000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15040000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; @@ -1182,7 +1182,7 @@ power-domains = <&pd_mscl>; }; - sysmmu_scaler_1: sysmmu@0x15050000 { + sysmmu_scaler_1: sysmmu@15050000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15050000 0x1000>; interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi deleted file mode 100644 index 48494710b7b2..000000000000 --- a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos7 TMU sensor configuration - * - * Copyright (c) 2016 Samsung Electronics Co., Ltd. - * http://www.samsung.com - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <9>; -samsung,tmu_reference_voltage = <17>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <75>; -samsung,tmu_min_efuse_value = <15>; -samsung,tmu_max_efuse_value = <100>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 93a84338938a..75ad724c487e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -589,7 +589,7 @@ clocks = <&clock_peris PCLK_TMU>, <&clock_peris SCLK_TMU>; clock-names = "tmu_apbif", "tmu_sclk"; - #include "exynos7-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; thermal-zones { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts index 7286b1ebfd7a..f90c040fd5e8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A Freedom Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index cdc4aee75227..2fb1cb1f7d8f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A QDS Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index c1a119effa61..5edb1e137a52 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A RDB Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 205f0f4c5df0..4c558a2133e2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1012A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi index 169e171407a6..6082ae022136 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree nodes for ls1043 * * Copyright 2015-2016 Freescale Semiconductor Inc. - * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &soc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 6341281485cf..c7b8d2c009cd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 3dc0c8e9663d..7b01ba8d3b7e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 1109f22bda5e..b9f5d2ff4ff2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/thermal/thermal.h> @@ -80,8 +43,8 @@ reg = <0x0>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; - #cooling-cells = <2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -91,6 +54,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -100,6 +64,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -109,6 +74,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; l2: l2-cache { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi index f5017dba0f17..d6caaea57d90 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree nodes for ls1046 * * Copyright 2015-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &soc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index 434383bade0e..e69306e6b0b1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Shaohui Xie <Shaohui.Xie@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 5dc2782e2a58..440e111651d5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Mingkai Hu <mingkai.hu@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 136ebfa9b333..65ce1c3cb568 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Mingkai Hu <mingkai.hu@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -87,6 +50,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -96,6 +60,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -105,6 +70,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; l2: l2-cache { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 30128051d0c0..6f48d21b97c0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NXP LS1088A QDS Board. * @@ -5,43 +6,6 @@ * * Harninder Rai <harninder.rai@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 4f17601b919c..8e925df6c01c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NXP LS1088A RDB Board. * @@ -5,43 +6,6 @@ * * Harninder Rai <harninder.rai@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 1c6556bcfddf..a07f612ab56b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for NXP Layerscape-1088A family SoC. * @@ -5,43 +6,6 @@ * * Harninder Rai <harninder.rai@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> @@ -76,6 +40,7 @@ reg = <0x1>; clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -84,6 +49,7 @@ reg = <0x2>; clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -92,6 +58,7 @@ reg = <0x3>; clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu4: cpu@100 { @@ -109,6 +76,7 @@ reg = <0x101>; clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu6: cpu@102 { @@ -117,6 +85,7 @@ reg = <0x102>; clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; cpu7: cpu@103 { @@ -125,6 +94,7 @@ reg = <0x103>; clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PH20>; + #cooling-cells = <2>; }; CPU_PH20: cpu-ph20 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index 3c99608b9b45..f6c3ee78ace0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a QDS Board. * @@ -7,43 +8,6 @@ * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index a4e7de9f70d8..44894356059c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a RDB Board. * @@ -7,43 +8,6 @@ * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts index fbbb73e571c0..5517305039a4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a software Simulator model * @@ -5,43 +6,6 @@ * * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 8d739301e7b8..f9c1d30cf4a7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * @@ -6,43 +7,6 @@ * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "fsl-ls208xa.dtsi" @@ -65,6 +29,7 @@ clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; }; cpu2: cpu@100 { @@ -84,6 +49,7 @@ clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; }; cpu4: cpu@200 { @@ -103,6 +69,7 @@ clocks = <&clockgen 1 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; }; cpu6: cpu@300 { @@ -122,6 +89,7 @@ clocks = <&clockgen 1 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; }; cluster0_l2: l2-cache0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts index eaee5b1c3a44..7c17b1bd4529 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2088A QDS Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index c411442cac62..f6b4d75a258b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2088A RDB Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index 0884e1a77901..7c882da3f6b0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2088A family SoC. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "fsl-ls208xa.dtsi" @@ -65,6 +29,7 @@ clocks = <&clockgen 1 0>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; }; cpu2: cpu@100 { @@ -84,6 +49,7 @@ clocks = <&clockgen 1 1>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; }; cpu4: cpu@200 { @@ -103,6 +69,7 @@ clocks = <&clockgen 1 2>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; }; cpu6: cpu@300 { @@ -122,6 +89,7 @@ clocks = <&clockgen 1 3>; cpu-idle-states = <&CPU_PW20>; next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; }; cluster0_l2: l2-cache0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index 1de618801c73..c11f52e7ae9a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080A QDS Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &esdhc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 061647bd97b8..6fd7f63085c9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080A RDB Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &esdhc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 137ef4dfc3e9..8cb78dd99672 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/thermal/thermal.h> diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi index ae15307f6e8b..ff1aba5fae7f 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ BMan Portals device tree * * Copyright 2011-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &bportals { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi index ecdffe731b98..dbd2fc3ba790 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 10g port #0 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi index a7f6af56b6a5..6fc5d2560057 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 10g port #1 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi index d600786719fb..4e02276fcf99 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #0 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi index 3c0b76d43043..0312fa43fa77 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #1 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi index 89633afca26a..af2df07971dd 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #2 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi index 87c2b705b1f9..4ac98dc8b227 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #3 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi index 8f4d74b96b67..bd932d8b0160 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #4 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi index d534f770f729..7de1c5203f3e 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #5 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi index 4664c33e0763..263b972a6d1e 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman0: fman@1a00000 { diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi index 6a93a4a9be0e..e3bec08b110d 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ QMan Portals device tree * * Copyright 2011-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &qportals { diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 68c5a6c819ae..c98bcbc8dfba 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -574,21 +574,35 @@ }; &dwmmc1 { + bus-width = <0x4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + disable-wp; + cd-inverted; + cd-gpios = <&gpio25 3 0>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_func + &sd_clk_cfg_func + &sd_cfg_func>; vmmc-supply = <&ldo16>; vqmmc-supply = <&ldo9>; status = "okay"; }; &dwmmc2 { /* WIFI */ + bus-width = <0x4>; + non-removable; broken-cd; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pmx_func + &sdio_clk_cfg_func + &sdio_cfg_func>; /* WL_EN */ vmmc-supply = <&wlan_en>; - ti,non-removable; - non-removable; - cap-power-off-card; - keep-power-in-suspend; - #address-cells = <0x1>; - #size-cells = <0x0>; status = "ok"; wlcore: wlcore@2 { diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 851190a719ea..f432b0a88c65 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -61,7 +61,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -75,7 +75,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -87,7 +87,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -99,7 +99,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&A53_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; operating-points-v2 = <&cluster0_opp>; @@ -111,7 +111,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -125,7 +125,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -137,7 +137,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -149,7 +149,7 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; operating-points-v2 = <&cluster1_opp>; @@ -158,31 +158,40 @@ idle-states { entry-method = "psci"; - CPU_SLEEP: cpu-sleep { + CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <40>; - exit-latency-us = <70>; - min-residency-us = <3000>; + entry-latency-us = <400>; + exit-latency-us = <650>; + min-residency-us = <1500>; }; - CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x1010000>; entry-latency-us = <500>; - exit-latency-us = <5000>; - min-residency-us = <20000>; + exit-latency-us = <1600>; + min-residency-us = <3500>; + }; + + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <400>; + exit-latency-us = <550>; + min-residency-us = <1500>; }; CLUSTER_SLEEP_1: cluster-sleep-1 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <1000>; - exit-latency-us = <5000>; - min-residency-us = <20000>; + entry-latency-us = <800>; + exit-latency-us = <2900>; + min-residency-us = <3500>; }; }; @@ -1020,16 +1029,10 @@ /* SD */ dwmmc1: dwmmc1@ff37f000 { - #address-cells = <1>; - #size-cells = <0>; - cd-inverted; compatible = "hisilicon,hi3660-dw-mshc"; - bus-width = <0x4>; - disable-wp; - cap-sd-highspeed; - supports-highspeed; - card-detect-delay = <200>; reg = <0x0 0xff37f000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_CLK_GATE_SD>, <&crg_ctrl HI3660_HCLK_GATE_SD>; @@ -1037,29 +1040,17 @@ clock-frequency = <3200000>; resets = <&crg_rst 0x94 18>; reset-names = "reset"; - cd-gpios = <&gpio25 3 0>; hisilicon,peripheral-syscon = <&sctrl>; - pinctrl-names = "default"; - pinctrl-0 = <&sd_pmx_func - &sd_clk_cfg_func - &sd_cfg_func>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; + card-detect-delay = <200>; status = "disabled"; - - slot@0 { - reg = <0x0>; - bus-width = <4>; - disable-wp; - }; }; /* SDIO */ dwmmc2: dwmmc2@ff3ff000 { compatible = "hisilicon,hi3660-dw-mshc"; reg = <0x0 0xff3ff000 0x0 0x1000>; + #address-cells = <0x1>; + #size-cells = <0x0>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>, <&crg_ctrl HI3660_HCLK_GATE_SDIO0>; @@ -1067,12 +1058,6 @@ resets = <&crg_rst 0x94 20>; reset-names = "reset"; card-detect-delay = <200>; - supports-highspeed; - keep-power-in-suspend; - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pmx_func - &sdio_clk_cfg_func - &sdio_cfg_func>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 7f12624f6c8e..f4964bee6a1a 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -323,7 +323,6 @@ bus-width = <0x4>; non-removable; cap-power-off-card; - keep-power-in-suspend; vmmc-supply = <®_vdd_3v3>; mmc-pwrseq = <&wl1835_pwrseq>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 586b281cd531..247024df714f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -88,8 +88,8 @@ next-level-cache = <&CLUSTER0_L2>; clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; /* min followed by max */ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <311>; }; @@ -101,6 +101,8 @@ next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu2: cpu@2 { @@ -111,6 +113,8 @@ next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu3: cpu@3 { @@ -121,6 +125,8 @@ next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu4: cpu@100 { @@ -131,6 +137,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu5: cpu@101 { @@ -141,6 +149,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu6: cpu@102 { @@ -151,6 +161,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; cpu7: cpu@103 { @@ -161,6 +173,8 @@ next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <311>; }; CLUSTER0_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 3353252d78a0..d9531e242eb4 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -22,6 +22,21 @@ serial1 = &uart1; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * The PSCI firmware region depicted below is the default one + * and should be updated by the bootloader. + */ + psci-area@4000000 { + reg = <0 0x4000000 0 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -98,6 +113,12 @@ status = "disabled"; }; + avs: avs@11500 { + compatible = "marvell,armada-3700-avs", + "syscon"; + reg = <0x11500 0x40>; + }; + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; reg = <0x12000 0x200>; @@ -287,7 +308,7 @@ }; crypto: crypto@90000 { - compatible = "inside-secure,safexcel-eip97"; + compatible = "inside-secure,safexcel-eip97ies"; reg = <0x90000 0x20000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index a66958ff4de6..56fa44860909 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -91,7 +91,7 @@ }; sfp_eth3: sfp-eth3 { - /* CON3,4 - CPS lane 5 */ + /* CON13,14 - CPS lane 5 */ compatible = "sff,sfp"; i2c-bus = <&sfp_1g_i2c>; los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index 1c6ff8197a88..840c8454d03e 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -398,7 +398,7 @@ }; CP110_LABEL(crypto): crypto@800000 { - compatible = "inside-secure,safexcel-eip197"; + compatible = "inside-secure,safexcel-eip197b"; reg = <0x800000 0x200000>; interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index ac17f60f998c..5b7fd6ad96e4 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts new file mode 100644 index 000000000000..742938a1a548 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for MediaTek X20 Development Board + * + * Copyright (C) 2018, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "mt6797.dtsi" + +/ { + model = "Mediatek X20 Development Board"; + compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797"; + + aliases { + serial0 = &uart1; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index b7837642c33a..a747b7bf132d 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -18,7 +18,7 @@ compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; chosen { - bootargs = "console=ttyS0,115200n1 swiotlb=512"; + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512"; }; cpus { @@ -34,7 +34,7 @@ }; gpio-keys { - compatible = "gpio-keys-polled"; + compatible = "gpio-keys"; poll-interval = <100>; factory { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 9213c966c224..de2c47bdbe64 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -89,6 +89,7 @@ <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; enable-method = "psci"; clock-frequency = <1300000000>; }; @@ -286,9 +287,16 @@ pio: pinctrl@10211000 { compatible = "mediatek,mt7622-pinctrl"; - reg = <0 0x10211000 0 0x1000>; + reg = <0 0x10211000 0 0x1000>, + <0 0x10005000 0 0x1000>; + reg-names = "base", "eint"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 103>; + interrupt-controller; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; }; watchdog: watchdog@10212000 { @@ -331,7 +339,7 @@ reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; clocks = <&topckgen CLK_TOP_UART_SEL>, - <&pericfg CLK_PERI_UART1_PD>; + <&pericfg CLK_PERI_UART0_PD>; clock-names = "baud", "bus"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 94597e33c806..abd2f15a544b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -168,6 +168,7 @@ reg = <0x001>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + #cooling-cells = <2>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; @@ -193,6 +194,7 @@ reg = <0x101>; enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; + #cooling-cells = <2>; clocks = <&infracfg CLK_INFRA_CA57SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index ecb034177fc2..57d3f00464ce 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -27,15 +27,33 @@ }; cbb { + ethernet@2490000 { + status = "okay"; + + phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; + }; + }; + }; + serial@3110000 { status = "okay"; }; /* SDMMC1 (SD/MMC) */ sdhci@3400000 { -/* cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>; -*/ }; /* SDMMC4 (eMMC) */ diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 6322ef265c2f..a4dfcd19b9e8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -18,6 +18,45 @@ #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; + gpio: gpio@2200000 { + compatible = "nvidia,tegra194-gpio"; + reg-names = "security", "gpio"; + reg = <0x2200000 0x10000>, + <0x2210000 0x10000>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + }; + + ethernet@2490000 { + compatible = "nvidia,tegra186-eqos", + "snps,dwc-qos-ethernet-4.10"; + reg = <0x02490000 0x10000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_AXI_CBB>, + <&bpmp TEGRA194_CLK_EQOS_AXI>, + <&bpmp TEGRA194_CLK_EQOS_RX>, + <&bpmp TEGRA194_CLK_EQOS_TX>, + <&bpmp TEGRA194_CLK_EQOS_PTP_REF>; + clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; + resets = <&bpmp TEGRA194_RESET_EQOS>; + reset-names = "eqos"; + status = "disabled"; + + snps,write-requests = <1>; + snps,read-requests = <3>; + snps,burst-map = <0x7>; + snps,txpbl = <16>; + snps,rxpbl = <8>; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -329,6 +368,73 @@ }; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10000>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10001>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x100>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x101>; + enable-method = "psci"; + }; + + cpu@4 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x200>; + enable-method = "psci"; + }; + + cpu@5 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x201>; + enable-method = "psci"; + }; + + cpu@6 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10300>; + enable-method = "psci"; + }; + + cpu@7 { + compatible = "nvidia,tegra194-carmel", "arm,armv8"; + device_type = "cpu"; + reg = <0x10301>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + status = "okay"; + method = "smc"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 9ff848792712..78ce3979ef09 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -338,7 +338,7 @@ led@6 { label = "apq8016-sbc:blue:bt"; gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bt"; + linux,default-trigger = "bluetooth-power"; default-state = "off"; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 4d5ef01f43a3..0ef90c6554a9 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -19,6 +19,33 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * P HSEC = Primary High Speed External Connector + * S HSEC = Secondary High Speed External Connector + * J14 = Camera Connector + * TP = Test Points + * + * Line names are taken from the schematic "DragonBoard 820c", + * drawing no: LM25-P2751-1 + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + / { aliases { serial0 = &blsp2_uart1; @@ -130,6 +157,218 @@ status = "okay"; }; + pinctrl@1010000 { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + }; + + qcom,spmi@400f000 { + pmic@0 { + gpios@c000 { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + }; + + mpps@a000 { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; + }; + }; + + pmic@2 { + gpios@c000 { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + }; + }; + }; + phy@34000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index c2625d15a8c0..7b32b8990d62 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -858,9 +858,9 @@ clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "vsync"; interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; @@ -883,10 +883,10 @@ <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "core_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "core", + "vsync"; iommus = <&apps_iommu 4>; @@ -922,12 +922,12 @@ <&gcc GCC_MDSS_BYTE0_CLK>, <&gcc GCC_MDSS_PCLK0_CLK>, <&gcc GCC_MDSS_ESC0_CLK>; - clock-names = "mdp_core_clk", - "iface_clk", - "bus_clk", - "byte_clk", - "pixel_clk", - "core_clk"; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; phys = <&dsi_phy0>; phy-names = "dsi-phy"; @@ -963,7 +963,7 @@ #phy-cells = <0>; clocks = <&gcc GCC_MDSS_AHB_CLK>; - clock-names = "iface_clk"; + clock-names = "iface"; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 8c7f9ca25b53..cd3865e7a270 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -377,6 +377,22 @@ reg = <0x740000 0x20000>; }; + tsens0: thermal-sensor@4a9000 { + compatible = "qcom,msm8996-tsens"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@4ad000 { + compatible = "qcom,msm8996-tsens"; + reg = <0x4ad000 0x1000>, /* TM */ + <0x4ac000 0x1000>; /* SROT */ + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; + }; + tcsr: syscon@7a0000 { compatible = "qcom,tcsr-msm8996", "syscon"; reg = <0x7a0000 0x18000>; @@ -459,12 +475,6 @@ status = "disabled"; }; - tsens0: thermal-sensor@4a8000 { - compatible = "qcom,msm8996-tsens"; - reg = <0x4a8000 0x2000>; - #thermal-sensor-cells = <1>; - }; - blsp2_uart1: serial@75b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x75b0000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi new file mode 100644 index 000000000000..4d5aca3eeb69 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright 2018 Google LLC. */ + +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&spmi_bus { + pm8005_lsid0: pmic@4 { + compatible = "qcom,pm8005", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8005_gpio: gpios@c000 { + compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>; + }; + + }; + + pm8005_lsid1: pmic@5 { + compatible = "qcom,pm8005", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi new file mode 100644 index 000000000000..92bed1e7d4bb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* Copyright 2018 Google LLC. */ + +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&spmi_bus { + pm8998_lsid0: pmic@0 { + compatible = "qcom,pm8998", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8998_gpio: gpios@c000 { + compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>, + <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, + <0 0xd0 0 IRQ_TYPE_NONE>, + <0 0xd1 0 IRQ_TYPE_NONE>, + <0 0xd2 0 IRQ_TYPE_NONE>, + <0 0xd3 0 IRQ_TYPE_NONE>, + <0 0xd4 0 IRQ_TYPE_NONE>, + <0 0xd5 0 IRQ_TYPE_NONE>, + <0 0xd6 0 IRQ_TYPE_NONE>, + <0 0xd7 0 IRQ_TYPE_NONE>, + <0 0xd8 0 IRQ_TYPE_NONE>, + <0 0xd9 0 IRQ_TYPE_NONE>; + }; + + }; + + pm8998_lsid1: pmic@1 { + compatible = "qcom,pm8998", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 979ab49913f1..6d651f314193 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -12,4 +12,49 @@ / { model = "Qualcomm Technologies, Inc. SDM845 MTP"; compatible = "qcom,sdm845-mtp"; + + aliases { + serial0 = &uart9; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c10 { + status = "okay"; + clock-frequency = <400000>; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb3c995..0c9a2aa6a1b5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -5,7 +5,10 @@ * Copyright (c) 2018, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,gcc-sdm845.h> +#include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> / { interrupt-parent = <&intc>; @@ -13,6 +16,41 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + }; + chosen { }; memory@80000000 { @@ -152,6 +190,11 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, @@ -206,6 +249,457 @@ #power-domain-cells = <1>; }; + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x8c0000 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x884000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x888000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x888000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x88c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0x88c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x890000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0x890000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x894000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0x894000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x898000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0x898000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0x89c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0x89c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0xac0000 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0xa80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0xa80000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0xa88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0xa88000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0xa8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0xa8c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0xa90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0xa90000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0xa94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0xa94000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0xa98000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0xa98000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_default>; + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0xa9c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0xa9c000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_default>; + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0x1f40000 0x40000>; @@ -219,6 +713,269 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default { + pinmux { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio17", "gpio18"; + function = "qup1"; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + pinmux { + pins = "gpio27", "gpio28"; + function = "qup2"; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + pinmux { + pins = "gpio41", "gpio42"; + function = "qup3"; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + pinmux { + pins = "gpio89", "gpio90"; + function = "qup4"; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + pinmux { + pins = "gpio85", "gpio86"; + function = "qup5"; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + pinmux { + pins = "gpio45", "gpio46"; + function = "qup6"; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + pinmux { + pins = "gpio93", "gpio94"; + function = "qup7"; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + pinmux { + pins = "gpio65", "gpio66"; + function = "qup8"; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + pinmux { + pins = "gpio55", "gpio56"; + function = "qup10"; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + pinmux { + pins = "gpio31", "gpio32"; + function = "qup11"; + }; + }; + + qup_i2c12_default: qup-i2c12-default { + pinmux { + pins = "gpio49", "gpio50"; + function = "qup12"; + }; + }; + + qup_i2c13_default: qup-i2c13-default { + pinmux { + pins = "gpio105", "gpio106"; + function = "qup13"; + }; + }; + + qup_i2c14_default: qup-i2c14-default { + pinmux { + pins = "gpio33", "gpio34"; + function = "qup14"; + }; + }; + + qup_i2c15_default: qup-i2c15-default { + pinmux { + pins = "gpio81", "gpio82"; + function = "qup15"; + }; + }; + + qup_spi0_default: qup-spi0-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup0"; + }; + }; + + qup_spi1_default: qup-spi1-default { + pinmux { + pins = "gpio17", "gpio18", + "gpio19", "gpio20"; + function = "qup1"; + }; + }; + + qup_spi2_default: qup-spi2-default { + pinmux { + pins = "gpio27", "gpio28", + "gpio29", "gpio30"; + function = "qup2"; + }; + }; + + qup_spi3_default: qup-spi3-default { + pinmux { + pins = "gpio41", "gpio42", + "gpio43", "gpio44"; + function = "qup3"; + }; + }; + + qup_spi4_default: qup-spi4-default { + pinmux { + pins = "gpio89", "gpio90", + "gpio91", "gpio92"; + function = "qup4"; + }; + }; + + qup_spi5_default: qup-spi5-default { + pinmux { + pins = "gpio85", "gpio86", + "gpio87", "gpio88"; + function = "qup5"; + }; + }; + + qup_spi6_default: qup-spi6-default { + pinmux { + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + function = "qup6"; + }; + }; + + qup_spi7_default: qup-spi7-default { + pinmux { + pins = "gpio93", "gpio94", + "gpio95", "gpio96"; + function = "qup7"; + }; + }; + + qup_spi8_default: qup-spi8-default { + pinmux { + pins = "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "qup8"; + }; + }; + + qup_spi9_default: qup-spi9-default { + pinmux { + pins = "gpio6", "gpio7", + "gpio4", "gpio5"; + function = "qup9"; + }; + }; + + qup_spi10_default: qup-spi10-default { + pinmux { + pins = "gpio55", "gpio56", + "gpio53", "gpio54"; + function = "qup10"; + }; + }; + + qup_spi11_default: qup-spi11-default { + pinmux { + pins = "gpio31", "gpio32", + "gpio33", "gpio34"; + function = "qup11"; + }; + }; + + qup_spi12_default: qup-spi12-default { + pinmux { + pins = "gpio49", "gpio50", + "gpio51", "gpio52"; + function = "qup12"; + }; + }; + + qup_spi13_default: qup-spi13-default { + pinmux { + pins = "gpio105", "gpio106", + "gpio107", "gpio108"; + function = "qup13"; + }; + }; + + qup_spi14_default: qup-spi14-default { + pinmux { + pins = "gpio33", "gpio34", + "gpio31", "gpio32"; + function = "qup14"; + }; + }; + + qup_spi15_default: qup-spi15-default { + pinmux { + pins = "gpio81", "gpio82", + "gpio83", "gpio84"; + function = "qup15"; + }; + }; + + qup_uart9_default: qup-uart9-default { + pinmux { + pins = "gpio4", "gpio5"; + function = "qup9"; + }; + }; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, /* TM */ + <0xc222000 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc265000 0x1ff>, /* TM */ + <0xc223000 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + #thermal-sensor-cells = <1>; }; spmi_bus: spmi@c440000 { @@ -246,6 +1003,29 @@ #mbox-cells = <1>; }; + apps_rsc: rsc@179c0000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x179c0000 0x10000>, + <0x179d0000 0x10000>, + <0x179e0000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sdm845-rpmh-clk"; + #clock-cells = <1>; + }; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts index 009cb1cb0dde..2f24dfc45617 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB Kingfisher board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7795-es1-h3ulcb.dts" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts index dd4f9b6a4254..598b98168559 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index 3f46345a4644..6b5fa91f1d5d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index e19dcd6cb767..7b2fbaec9aef 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7795 ES1.x SoC * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7795.dtsi" @@ -80,7 +77,7 @@ vspd3: vsp@fea38000 { compatible = "renesas,vsp2"; - reg = <0 0xfea38000 0 0x8000>; + reg = <0 0xfea38000 0 0x5000>; interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 620>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts index 4403227c0f97..80791ed27539 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB Kingfisher board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7795-h3ulcb.dts" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index 0afe777973de..df50bf46406e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 0efbef5ea9b7..446822f5751c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board with R-Car H3 ES2.0 * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index e231b5a7cbab..8ded64d0a4d5 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0 * * Copyright (C) 2015-2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index d842940b2f43..fb9d08ad7659 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7795 SoC * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7795-cpg-mssr.h> @@ -291,7 +288,7 @@ #size-cells = <2>; ranges; - wdt0: watchdog@e6020000 { + rwdt: watchdog@e6020000 { compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; @@ -528,6 +525,15 @@ status = "disabled"; }; + arm_cc630p: crypto@e6601000 { + compatible = "arm,cryptocell-630p-ree"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0xe6601000 0 0x1000>; + clocks = <&cpg CPG_MOD 229>; + resets = <&cpg 229>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + }; + i2c3: i2c@e66d0000 { #address-cells = <1>; #size-cells = <0>; @@ -2530,7 +2536,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2541,7 +2547,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2552,7 +2558,7 @@ vspd2: vsp@fea30000 { compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x8000>; + reg = <0 0xfea30000 0 0x5000>; interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts index de2390f009e7..2df50eb11f16 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the M3ULCB Kingfisher board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7796-m3ulcb.dts" diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts index daee1f1a3f68..cbd8acbf537e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 90cca09b9a5e..052d72acc862 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board with R-Car M3-W * * Copyright (C) 2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts index ddf35d4cd5e5..8860be65342e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W * * Copyright (C) 2015-2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 7c25be6b5af3..cbd35c00b4af 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7796 SoC * - * Copyright (C) 2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * Copyright (C) 2016-2017 Renesas Electronics Corp. */ #include <dt-bindings/clock/r8a7796-cpg-mssr.h> @@ -269,7 +266,7 @@ #size-cells = <2>; ranges; - wdt0: watchdog@e6020000 { + rwdt: watchdog@e6020000 { compatible = "renesas,r8a7796-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; @@ -2108,13 +2105,57 @@ }; pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a7796", + "renesas,pcie-rcar-gen3"; reg = <0 0xfe000000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; }; pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a7796", + "renesas,pcie-rcar-gen3"; reg = <0 0xee800000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; }; imr-lx4@fe860000 { @@ -2212,7 +2253,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2223,7 +2264,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2234,7 +2275,7 @@ vspd2: vsp@fea30000 { compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x8000>; + reg = <0 0xfea30000 0 0x5000>; interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 486aecacb22a..0cd44461a0bd 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -138,9 +138,14 @@ #size-cells = <2>; ranges; - wdt0: watchdog@e6020000 { + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77965-wdt", + "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; - /* placeholder */ + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; }; gpio0: gpio@e6050000 { @@ -451,6 +456,94 @@ status = "disabled"; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a77965", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a7796", "renesas,rcar-gen3-usbhs"; @@ -611,6 +704,95 @@ dma-channels = <16>; }; + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77965_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77965_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a77965"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A77965_PD_A3VP>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77965", "renesas,etheravb-rcar-gen3"; @@ -732,7 +914,7 @@ reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 207>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x51>, <&dmac1 0x50>, @@ -749,7 +931,7 @@ reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 206>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x53>, <&dmac1 0x52>, @@ -766,7 +948,7 @@ reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -780,7 +962,7 @@ reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 204>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; @@ -796,7 +978,7 @@ reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 203>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; @@ -812,7 +994,7 @@ reg = <0 0xe6f30000 0 64>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 202>, - <&cpg CPG_CORE 20>, + <&cpg CPG_CORE R8A77965_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, @@ -1176,6 +1358,9 @@ port@0 { reg = <0>; }; + port@1 { + reg = <1>; + }; }; }; @@ -1340,13 +1525,57 @@ }; pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a77965", + "renesas,pcie-rcar-gen3"; reg = <0 0xfe000000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; }; pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a77965", + "renesas,pcie-rcar-gen3"; reg = <0 0xee800000 0 0x80000>; - /* placeholder */ + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; }; fcpf0: fcp@fe950000 { @@ -1397,7 +1626,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -1416,7 +1645,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 21f9cf5c6e84..b6d53321576b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Eagle board * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 9fce031a596f..8eac8ca6550b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the V3M Starter Kit board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 98a2317a16c4..954168858fed 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a77970 SoC * * Copyright (C) 2016-2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a77970-cpg-mssr.h> @@ -776,7 +773,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 0b93a7d76585..9f25c407dfd7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -59,6 +59,8 @@ phy0: ethernet-phy@0 { rxc-skew-ps = <1500>; reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -80,6 +82,28 @@ clock-frequency = <32768>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander0: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + io_expander1: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &mmc0 { pinctrl-0 = <&mmc_pins>; pinctrl-1 = <&mmc_pins_uhs>; @@ -104,6 +128,11 @@ function = "canfd0"; }; + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + mmc_pins: mmc { groups = "mmc_data8", "mmc_ctrl", "mmc_ds"; function = "mmc"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index c9680994555d..9dac42f8f804 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -15,6 +15,7 @@ aliases { serial0 = &scif0; + ethernet0 = &gether; }; chosen { @@ -36,7 +37,29 @@ clock-frequency = <32768>; }; +&gether { + pinctrl-0 = <&gether_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + }; +}; + &pfc { + gether_pins: gether { + groups = "gether_mdio_a", "gether_rgmii", + "gether_txcrefclk", "gether_txcrefclk_mega"; + function = "gether"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 4c40f9f0ebc9..b8c9a56562f2 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -16,6 +16,15 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -30,6 +39,36 @@ enable-method = "psci"; }; + a53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <1>; + clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; + power-domains = <&sysc R8A77980_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <2>; + clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; + power-domains = <&sysc R8A77980_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <3>; + clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; + power-domains = <&sysc R8A77980_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + L2_CA53: cache-controller { compatible = "cache"; power-domains = <&sysc R8A77980_PD_CA53_SCU>; @@ -79,6 +118,96 @@ #size-cells = <2>; ranges; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 22>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 25>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77980", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a77980"; reg = <0 0xe6060000 0 0x50c>; @@ -105,6 +234,118 @@ #power-domain-cells = <1>; }; + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77980", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + compatible = "renesas,i2c-r8a77980", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac1 0x9b>, <&dmac1 0x9a>, + <&dmac2 0x9b>, <&dmac2 0x9a>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a77980", "renesas,rcar-gen3-hscif", @@ -202,6 +443,69 @@ }; }; + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: mmu@e7b00000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7b00000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: mmu@e7960000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe7960000 0 0x1000>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: mmu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77980_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77980"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77980", "renesas,etheravb-rcar-gen3"; @@ -387,6 +691,18 @@ dma-channels = <16>; }; + gether: ethernet@e7400000 { + compatible = "renesas,gether-r8a77980"; + reg = <0 0xe7400000 0 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 813>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmc0: mmc@ee140000 { compatible = "renesas,sdhi-r8a77980", "renesas,rcar-gen3-sdhi"; @@ -408,7 +724,7 @@ <0x0 0xf1020000 0 0x20000>, <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; @@ -416,6 +732,83 @@ resets = <&cpg 408>; }; + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a77980", + "renesas,du-r8a77970"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>; + clock-names = "du.0"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 724>; + vsps = <&vspd0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a77980-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = + <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; @@ -424,13 +817,13 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 7a09d0524f9b..2bc3a4884b00 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -47,10 +47,18 @@ }; }; +&ehci0 { + status = "okay"; +}; + &extal_clk { clock-frequency = <48000000>; }; +&ohci0 { + status = "okay"; +}; + &pfc { avb_pins: avb { mux { @@ -58,8 +66,37 @@ function = "avb"; }; }; + + usb0_pins: usb { + groups = "usb0_b"; + function = "usb0"; + }; + + usb30_pins: usb30 { + groups = "usb30"; + function = "usb30"; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; }; &scif2 { status = "okay"; }; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index be4f519711a1..ae89260baad9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/clock/renesas-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a77990-sysc.h> / { compatible = "renesas,r8a77990"; @@ -17,16 +18,24 @@ #address-cells = <1>; #size-cells = <0>; - /* 1 core only at this point */ a53_0: cpu@0 { compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0>; + reg = <0>; device_type = "cpu"; power-domains = <&sysc 5>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; + a53_1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <1>; + device_type = "cpu"; + power-domains = <&sysc 6>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + L2_CA53: cache-controller-0 { compatible = "cache"; power-domains = <&sysc 21>; @@ -44,8 +53,9 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&a53_0>; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>; }; psci { @@ -60,6 +70,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77990-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc 32>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77990", "renesas,rcar-gen3-gpio"; @@ -191,10 +211,91 @@ #power-domain-cells = <1>; }; + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77990_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a77990"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77990", "renesas,etheravb-rcar-gen3"; - reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + reg = <0 0xe6800000 0 0x800>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, @@ -248,6 +349,54 @@ status = "disabled"; }; + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a77990", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a77990", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc 32>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -258,7 +407,7 @@ <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc 32>; @@ -273,9 +422,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 9d73de8bc94d..a8e8f2669d4c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Draak board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; @@ -59,6 +56,27 @@ }; }; + composite-in { + compatible = "composite-video-connector"; + + port { + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -82,6 +100,12 @@ regulator-boot-on; regulator-always-on; }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &extal_clk { @@ -142,6 +166,11 @@ groups = "usb0"; function = "usb0"; }; + + vin4_pins_cvbs: vin4 { + groups = "vin4_data8", "vin4_sync", "vin4_clk"; + function = "vin4"; + }; }; &i2c0 { @@ -154,6 +183,77 @@ reg = <0x50>; pagesize = <8>; }; + + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * CVBS is the default selection, link it to + * VIN4 here. + */ + adv7180_out: endpoint { + remote-endpoint = <&vin4_in>; + }; + }; + }; + + }; + + hdmi-decoder@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + + /* + * The VIN4 video input path is shared between + * CVBS and HDMI inputs through SW[49-53] + * switches. + * + * CVBS is the default selection, leave HDMI + * not connected here. + */ + adv7612_out: endpoint { + pclk-sample = <0>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; + }; }; &i2c1 { @@ -167,6 +267,11 @@ pinctrl-names = "default"; status = "okay"; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x12_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + ports { port@0 { endpoint { @@ -246,3 +351,23 @@ timeout-sec = <60>; status = "okay"; }; + +&vin4 { + pinctrl-0 = <&vin4_pins_cvbs>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vin4_in: endpoint { + remote-endpoint = <&adv7180_out>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 2506f46293e8..fe77bc43c447 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a77995 SoC * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a77995-cpg-mssr.h> @@ -88,8 +85,7 @@ gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6050000 0 0x50>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -104,8 +100,7 @@ gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6051000 0 0x50>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -120,8 +115,7 @@ gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6052000 0 0x50>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -136,8 +130,7 @@ gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6053000 0 0x50>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -152,8 +145,7 @@ gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6054000 0 0x50>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -168,8 +160,7 @@ gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055000 0 0x50>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -184,8 +175,7 @@ gpio6: gpio@e6055400 { compatible = "renesas,gpio-r8a77995", - "renesas,rcar-gen3-gpio", - "renesas,gpio-rcar"; + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055400 0 0x50>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; @@ -224,6 +214,18 @@ #power-domain-cells = <1>; }; + thermal: thermal@e6190000 { + compatible = "renesas,thermal-r8a77995"; + reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a77995", "renesas,irqc"; #interrupt-cells = <2>; @@ -240,6 +242,41 @@ resets = <&cpg 407>; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -408,6 +445,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xe6740000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -415,6 +453,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xe7740000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -422,6 +461,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xe6570000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -430,6 +470,7 @@ reg = <0 0xe67b0000 0 0x1000>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -437,6 +478,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xec670000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -444,6 +486,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfd800000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -451,6 +494,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xffc80000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 10>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -458,6 +502,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfe6b0000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -465,6 +510,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfebd0000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -472,6 +518,7 @@ compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfe990000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -593,6 +640,40 @@ status = "disabled"; }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a77995", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -610,6 +691,117 @@ status = "disabled"; }; + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a77995", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x64>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x64>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x64>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a77995", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x64>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + vin4: video@e6ef4000 { compatible = "renesas,vin-r8a77995"; reg = <0 0xe6ef4000 0 0x1000>; @@ -699,7 +891,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x8000>; + reg = <0 0xfea20000 0 0x5000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -709,7 +901,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x8000>; + reg = <0 0xfea28000 0 0x5000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -785,6 +977,25 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 9256fbaaab7f..7d3d866a0063 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for common parts of Salvator-X board variants * * Copyright (C) 2015-2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* @@ -36,7 +33,7 @@ / { aliases { serial0 = &scif2; - serial1 = &scif1; + serial1 = &hscif1; ethernet0 = &avb; }; @@ -341,6 +338,15 @@ clock-frequency = <32768>; }; +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + /* Please only enable hscif1 or scif1 */ + status = "okay"; +}; + &hsusb { dr_mode = "otg"; status = "okay"; @@ -440,7 +446,7 @@ }; }; - port@10 { + port@a { reg = <10>; adv7482_txa: endpoint { @@ -450,7 +456,7 @@ }; }; - port@11 { + port@b { reg = <11>; adv7482_txb: endpoint { @@ -546,6 +552,11 @@ function = "du"; }; + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + i2c2_pins: i2c2 { groups = "i2c2_a"; function = "i2c2"; @@ -589,13 +600,13 @@ }; sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <3300>; }; sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <1800>; }; @@ -711,7 +722,8 @@ pinctrl-names = "default"; uart-has-rtscts; - status = "okay"; + /* Please only enable hscif1 or scif1 */ + /* status = "okay"; */ }; &scif2 { @@ -838,7 +850,7 @@ status = "okay"; }; -&wdt0 { +&rwdt { timeout-sec = <60>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi index 468868c8ed9f..ddee50e64632 100644 --- a/arch/arm64/boot/dts/renesas/salvator-x.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X board * * Copyright (C) 2015-2016 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "salvator-common.dtsi" @@ -20,6 +17,8 @@ }; &i2c4 { + clock-frequency = <400000>; + versaclock5: clock-generator@6a { compatible = "idt,5p49v5923"; reg = <0x6a>; diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi index bf4d200fb546..717d42758cbc 100644 --- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Salvator-X 2nd version board * * Copyright (C) 2015-2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "salvator-common.dtsi" @@ -20,6 +17,8 @@ }; &i2c4 { + clock-frequency = <400000>; + versaclock6: clock-generator@6a { compatible = "idt,5p49v6901"; reg = <0x6a>; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index a4e715cbde87..8bf3091a899c 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Kingfisher (ULCB extension) board * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 0edb16e6b372..0ead552d7eae 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the R-Car Gen3 ULCB board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/gpio/gpio.h> @@ -330,13 +327,13 @@ }; sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <3300>; }; sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl"; + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; function = "sdhi2"; power-source = <1800>; }; @@ -447,7 +444,7 @@ status = "okay"; }; -&wdt0 { +&rwdt { timeout-sec = <60>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 48a83f882947..b0092d95b574 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -9,7 +9,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index 3d551e3e6c23..8302d86d35c4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 28257724a56e..5272e887a434 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 PINE64 - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index b8e9da15e00c..3f5a2944300f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rk3328-cru.h> @@ -89,6 +52,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -100,6 +64,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -111,6 +76,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; clocks = <&cru ARMCLK>; + #cooling-cells = <2>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -331,7 +297,7 @@ reg = <0x0 0xff120000 0x0 0x100>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "sclk_uart", "pclk_uart"; + clock-names = "baudclk", "apb_pclk"; dmas = <&dmac 4>, <&dmac 5>; dma-names = "tx", "rx"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts index 8a5275f0539b..160f2c7e9559 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index a37220a9387c..4de089149c50 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index 5e4d3a7015f5..6b9b1ac1994c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index d3f6c8e0d206..96147d93dd1d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index 13a9e22f5d2d..fc1bf078a41f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index b3510d56517a..7452bedf1a7e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index ad91ced78649..9c24de1ba43c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rk3368-cru.h> @@ -113,7 +76,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ }; @@ -122,6 +84,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_l2: cpu@2 { @@ -129,6 +92,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_l3: cpu@3 { @@ -136,6 +100,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_b0: cpu@100 { @@ -143,7 +108,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ }; @@ -152,6 +116,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_b2: cpu@102 { @@ -159,6 +124,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; cpu_b3: cpu@103 { @@ -166,6 +132,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 56533c344ef2..959ddc3c7df5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts new file mode 100644 index 000000000000..8978d924eb83 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts @@ -0,0 +1,599 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd. + * + * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw + */ + +/dts-v1/; +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "96boards RK3399 Ficus"; + compatible = "vamrs,ficus", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc1v8_s0: vcc1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_drv>; + regulator-boot-on; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc5v0_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 0>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc3v3_sys>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + status = "okay"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v0_sd: LDO_REG5 { + regulator-name = "vcc3v0_sd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&io_domains { + bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ + audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ + sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */ + gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */ + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + gmac { + rgmii_sleep_pins: rgmii-sleep-pins { + rockchip,pins = + <3 15 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + sdmmc { + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>, + <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>; + }; + }; + + pcie { + pcie_drv: pcie-drv { + rockchip,pins = + <1 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = + <1 17 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = + <1 14 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb2 { + host_vbus_drv: host-vbus-drv { + rockchip,pins = + <4 27 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + clock-frequency = <100000000>; + clock-freq-min-max = <100000 100000000>; + disable-wp; + sd-uhs-sdr104; + vqmmc-supply = <&vcc_sd>; + card-detect-delay = <800>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "host"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 2a352763c848..38336ab57cc4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -1,46 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -109,6 +73,39 @@ regulator-max-microvolt = <12000000>; }; + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + }; + }; + rt5640-sound { compatible = "simple-audio-card"; simple-audio-card,name = "rockchip,rt5640-codec"; @@ -529,19 +526,16 @@ &i2s0 { rockchip,playback-channels = <8>; rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; status = "okay"; }; &i2s1 { rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - #sound-dai-cells = <0>; status = "okay"; }; &i2s2 { - #sound-dai-cells = <0>; status = "okay"; }; @@ -627,6 +621,16 @@ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts new file mode 100644 index 000000000000..1ee0dc0d9f10 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Bob Rev 4+ board device tree source + * + * Copyright 2018 Google, Inc + */ + +/dts-v1/; +#include "rk3399-gru-chromebook.dtsi" + +/ { + model = "Google Bob"; + compatible = "google,bob-rev13", "google,bob-rev12", + "google,bob-rev11", "google,bob-rev10", + "google,bob-rev9", "google,bob-rev8", + "google,bob-rev7", "google,bob-rev6", + "google,bob-rev5", "google,bob-rev4", + "google,bob", "google,gru", "rockchip,rk3399"; + + edp_panel: edp-panel { + compatible = "boe,nv101wxmn51", "simple-panel"; + backlight = <&backlight>; + power-supply = <&pp3300_disp>; + + ports { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; +}; + +&ap_i2c_ts { + touchscreen: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio3>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int_l &touch_reset_l>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; +}; + +&ap_i2c_tp { + trackpad: trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int_l>; + wakeup-source; + }; +}; + +&backlight { + pwms = <&cros_ec_pwm 0>; +}; + +&cpu_alert0 { + temperature = <65000>; +}; + +&cpu_alert1 { + temperature = <70000>; +}; + +&spi0 { + status = "okay"; +}; + +&pinctrl { + tpm { + h1_int_od_l: h1-int-od-l { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi new file mode 100644 index 000000000000..ff81dfda3b95 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -0,0 +1,397 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Gru-Chromebook shared properties + * + * Copyright 2018 Google, Inc + */ + +#include "rk3399-gru.dtsi" + +/ { + pp900_ap: pp900-ap { + compatible = "regulator-fixed"; + regulator-name = "pp900_ap"; + + /* EC turns on w/ pp900_ap_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + /* EC turns on w/ pp900_usb_en */ + pp900_usb: pp900-ap { + }; + + /* EC turns on w/ pp900_pcie_en */ + pp900_pcie: pp900-ap { + }; + + pp3000: pp3000 { + compatible = "regulator-fixed"; + regulator-name = "pp3000"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3000_en>; + + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&ppvar_sys>; + }; + + ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { + compatible = "pwm-regulator"; + regulator-name = "ppvar_centerlogic_pwm"; + + pwms = <&pwm3 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <799434>; + regulator-max-microvolt = <1049925>; + }; + + ppvar_centerlogic: ppvar-centerlogic { + compatible = "vctrl-regulator"; + regulator-name = "ppvar_centerlogic"; + + regulator-min-microvolt = <799434>; + regulator-max-microvolt = <1049925>; + + ctrl-supply = <&ppvar_centerlogic_pwm>; + ctrl-voltage-range = <799434 1049925>; + + regulator-settling-time-up-us = <378>; + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; + }; + + /* Schematics call this PPVAR even though it's fixed */ + ppvar_logic: ppvar-logic { + compatible = "regulator-fixed"; + regulator-name = "ppvar_logic"; + + /* EC turns on w/ ppvar_logic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + pp1800_audio: pp1800-audio { + compatible = "regulator-fixed"; + regulator-name = "pp1800_audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_audio_en>; + + enable-active-high; + gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp1800>; + }; + + /* gpio is shared with pp3300_wifi_bt */ + pp1800_pcie: pp1800-pcie { + compatible = "regulator-fixed"; + regulator-name = "pp1800_pcie"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_pd_l>; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + /* + * Need to wait 1ms + ramp-up time before we can power on WiFi. + * This has been approximated as 8ms total. + */ + regulator-enable-ramp-delay = <8000>; + + vin-supply = <&pp1800>; + }; + + /* Always on; plain and simple */ + pp3000_ap: pp3000_emmc: pp3000 { + }; + + pp1500_ap_io: pp1500-ap-io { + compatible = "regulator-fixed"; + regulator-name = "pp1500_ap_io"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1500_en>; + + enable-active-high; + gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&pp1800>; + }; + + pp3300_disp: pp3300-disp { + compatible = "regulator-fixed"; + regulator-name = "pp3300_disp"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_disp_en>; + + enable-active-high; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <2000>; + vin-supply = <&pp3300>; + }; + + /* EC turns on w/ pp3300_usb_en_l */ + pp3300_usb: pp3300 { + }; + + /* gpio is shared with pp1800_pcie and pinctrl is set there */ + pp3300_wifi_bt: pp3300-wifi-bt { + compatible = "regulator-fixed"; + regulator-name = "pp3300_wifi_bt"; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp3300>; + }; + + /* + * This is a bit of a hack. The WiFi module should be reset at least + * 1ms after its regulators have ramped up (max rampup time is ~7ms). + * With some stretching of the imagination, we can call the 1.8V + * regulator a supply. + */ + wlan_pd_n: wlan-pd-n { + compatible = "regulator-fixed"; + regulator-name = "wlan_pd_n"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_reset_l>; + + enable-active-high; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp1800_pcie>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + 17 18 19 20 21 22 23 24 25 26 27 28 29 30 + 31 32 33 34 35 36 37 38 39 40 41 42 43 44 + 45 46 47 48 49 50 51 52 53 54 55 56 57 58 + 59 60 61 62 63 64 65 66 67 68 69 70 71 72 + 73 74 75 76 77 78 79 80 81 82 83 84 85 86 + 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; + default-brightness-level = <51>; + enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + power-supply = <&pp3300_disp>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwm-delay-us = <10000>; + }; +}; + +&ppvar_bigcpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&ppvar_litcpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&ppvar_gpu { + min-slew-down-rate = <225>; + ovp-threshold-percent = <16>; +}; + +&cdn_dp { + extcon = <&usbc_extcon0>, <&usbc_extcon1>; +}; + +&edp { + status = "okay"; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +ap_i2c_mic: &i2c1 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + headsetcodec: rt5514@57 { + compatible = "realtek,rt5514"; + reg = <0x57>; + realtek,dmic-init-delay-ms = <20>; + }; +}; + +ap_i2c_tp: &i2c5 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + /* + * Note strange pullup enable. Apparently this avoids leakage but + * still allows us to get nice 4.7K pullups for high speed i2c + * transfers. Basically we want the pullup on whenever the ap is + * alive, so the "en" pin just gets set to output high. + */ + pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; +}; + +&cros_ec { + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + usbc_extcon1: extcon@1 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <1>; + + #extcon-cells = <0>; + }; +}; + +&sound { + rockchip,codec = <&max98357a &headsetcodec + &codec &wacky_spi_audio &cdn_dp>; +}; + +&spi2 { + wacky_spi_audio: spi2@0 { + compatible = "realtek,rt5514"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mic_int>; + /* May run faster once verified. */ + spi-max-frequency = <10000000>; + wakeup-source; + }; +}; + +&pci_rootport { + mvl_wifi: wifi@0,0 { + compatible = "pci1b4b,2b42"; + reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 + 0x83010000 0x0 0x00100000 0x0 0x00100000>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_host_wake_l>; + wakeup-source; + }; +}; + +&tcphy1 { + status = "okay"; + extcon = <&usbc_extcon1>; +}; + +&u2phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; + extcon = <&usbc_extcon1>; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&pinctrl { + discrete-regulators { + pp1500_en: pp1500-en { + rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + pp1800_audio_en: pp1800-audio-en { + rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO + &pcfg_pull_down>; + }; + + pp3000_en: pp3000-en { + rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + pp3300_disp_en: pp3300-disp-en { + rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + wlan_module_pd_l: wlan-module-pd-l { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO + &pcfg_pull_down>; + }; + }; +}; + +&wifi { + wifi_perst_l: wifi-perst-l { + rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_host_wake_l: wlan-host-wake-l { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 82179125bfb7..2cc7c47d6a85 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -1,49 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Gru-Kevin Rev 6+ board device tree source * * Copyright 2016-2017 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "rk3399-gru.dtsi" +#include "rk3399-gru-chromebook.dtsi" #include <dt-bindings/input/linux-event-codes.h> /* @@ -75,24 +38,6 @@ vin-supply = <&pp3300>; }; - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&cros_ec_pwm 1>; - brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 17 18 19 20 21 22 23 24 25 26 27 28 29 30 - 31 32 33 34 35 36 37 38 39 40 41 42 43 44 - 45 46 47 48 49 50 51 52 53 54 55 56 57 58 - 59 60 61 62 63 64 65 66 67 68 69 70 71 72 - 73 74 75 76 77 78 79 80 81 82 83 84 85 86 - 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; - default-brightness-level = <51>; - enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - power-supply = <&pp3300_disp>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en>; - pwm-delay-us = <10000>; - }; - edp_panel: edp-panel { compatible = "sharp,lq123p1jx31", "simple-panel"; backlight = <&backlight>; @@ -124,6 +69,10 @@ }; }; +&backlight { + pwms = <&cros_ec_pwm 1>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>; @@ -280,23 +229,6 @@ ap_i2c_dig: &i2c2 { }; }; -&edp { - status = "okay"; - - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; -}; - &ppvar_bigcpu_pwm { regulator-min-microvolt = <798674>; regulator-max-microvolt = <1302172>; @@ -374,10 +306,4 @@ ap_i2c_dig: &i2c2 { rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; }; }; - - wifi { - wlan_host_wake_l: wlan-host-wake-l { - rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index f49bfab75dd0..ca07f6032200 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Gru (and derivatives) board device tree source * * Copyright 2016-2017 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> @@ -82,19 +45,6 @@ regulator-boot-on; }; - pp900_ap: pp900-ap { - compatible = "regulator-fixed"; - regulator-name = "pp900_ap"; - - /* EC turns on w/ pp900_ap_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - vin-supply = <&ppvar_sys>; - }; - pp1200_lpddr: pp1200-lpddr { compatible = "regulator-fixed"; regulator-name = "pp1200_lpddr"; @@ -121,23 +71,6 @@ vin-supply = <&ppvar_sys>; }; - pp3000: pp3000 { - compatible = "regulator-fixed"; - regulator-name = "pp3000"; - pinctrl-names = "default"; - pinctrl-0 = <&pp3000_en>; - - enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - vin-supply = <&ppvar_sys>; - }; - pp3300: pp3300 { compatible = "regulator-fixed"; regulator-name = "pp3300"; @@ -191,8 +124,6 @@ ctrl-voltage-range = <800107 1302232>; regulator-settling-time-up-us = <322>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; }; ppvar_litcpu_pwm: ppvar-litcpu-pwm { @@ -222,8 +153,6 @@ ctrl-voltage-range = <797743 1307837>; regulator-settling-time-up-us = <384>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; }; ppvar_gpu_pwm: ppvar-gpu-pwm { @@ -253,63 +182,12 @@ ctrl-voltage-range = <786384 1217747>; regulator-settling-time-up-us = <390>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; - }; - - ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { - compatible = "pwm-regulator"; - regulator-name = "ppvar_centerlogic_pwm"; - - pwms = <&pwm3 0 3337 0>; - pwm-supply = <&ppvar_sys>; - pwm-dutycycle-range = <100 0>; - pwm-dutycycle-unit = <100>; - - /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <799434>; - regulator-max-microvolt = <1049925>; - }; - - ppvar_centerlogic: ppvar-centerlogic { - compatible = "vctrl-regulator"; - regulator-name = "ppvar_centerlogic"; - - regulator-min-microvolt = <799434>; - regulator-max-microvolt = <1049925>; - - ctrl-supply = <&ppvar_centerlogic_pwm>; - ctrl-voltage-range = <799434 1049925>; - - regulator-settling-time-up-us = <378>; - min-slew-down-rate = <225>; - ovp-threshold-percent = <16>; - }; - - /* Schematics call this PPVAR even though it's fixed */ - ppvar_logic: ppvar-logic { - compatible = "regulator-fixed"; - regulator-name = "ppvar_logic"; - - /* EC turns on w/ ppvar_logic_en; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - vin-supply = <&ppvar_sys>; }; /* EC turns on w/ pp900_ddrpll_en */ pp900_ddrpll: pp900-ap { }; - /* EC turns on w/ pp900_pcie_en */ - pp900_pcie: pp900-ap { - }; - /* EC turns on w/ pp900_pll_en */ pp900_pll: pp900-ap { }; @@ -318,10 +196,6 @@ pp900_pmu: pp900-ap { }; - /* EC turns on w/ pp900_usb_en */ - pp900_usb: pp900-ap { - }; - /* EC turns on w/ pp1800_s0_en_l */ pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 { }; @@ -346,79 +220,6 @@ pp1800_usb: pp1800 { }; - pp1500_ap_io: pp1500-ap-io { - compatible = "regulator-fixed"; - regulator-name = "pp1500_ap_io"; - pinctrl-names = "default"; - pinctrl-0 = <&pp1500_en>; - - enable-active-high; - gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - vin-supply = <&pp1800>; - }; - - pp1800_audio: pp1800-audio { - compatible = "regulator-fixed"; - regulator-name = "pp1800_audio"; - pinctrl-names = "default"; - pinctrl-0 = <&pp1800_audio_en>; - - enable-active-high; - gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; - - regulator-always-on; - regulator-boot-on; - - vin-supply = <&pp1800>; - }; - - /* gpio is shared with pp3300_wifi_bt */ - pp1800_pcie: pp1800-pcie { - compatible = "regulator-fixed"; - regulator-name = "pp1800_pcie"; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_module_pd_l>; - - enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - - /* - * Need to wait 1ms + ramp-up time before we can power on WiFi. - * This has been approximated as 8ms total. - */ - regulator-enable-ramp-delay = <8000>; - - vin-supply = <&pp1800>; - }; - - /* - * This is a bit of a hack. The WiFi module should be reset at least - * 1ms after its regulators have ramped up (max rampup time is ~7ms). - * With some stretching of the imagination, we can call the 1.8V - * regulator a supply. - */ - wlan_pd_n: wlan-pd-n { - compatible = "regulator-fixed"; - regulator-name = "wlan_pd_n"; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_module_reset_l>; - - enable-active-high; - gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; - - vin-supply = <&pp1800_pcie>; - }; - - /* Always on; plain and simple */ - pp3000_ap: pp3000_emmc: pp3000 { - }; - pp3000_sd_slot: pp3000-sd-slot { compatible = "regulator-fixed"; regulator-name = "pp3000_sd_slot"; @@ -457,34 +258,6 @@ pp3300_trackpad: pp3300-trackpad { }; - /* EC turns on w/ pp3300_usb_en_l */ - pp3300_usb: pp3300 { - }; - - pp3300_disp: pp3300-disp { - compatible = "regulator-fixed"; - regulator-name = "pp3300_disp"; - pinctrl-names = "default"; - pinctrl-0 = <&pp3300_disp_en>; - - enable-active-high; - gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; - - startup-delay-us = <2000>; - vin-supply = <&pp3300>; - }; - - /* gpio is shared with pp1800_pcie and pinctrl is set there */ - pp3300_wifi_bt: pp3300-wifi-bt { - compatible = "regulator-fixed"; - regulator-name = "pp3300_wifi_bt"; - - enable-active-high; - gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; - - vin-supply = <&pp3300>; - }; - /* EC turns on w/ usb_a_en */ pp5000_usb_a_vbus: pp5000 { }; @@ -494,7 +267,7 @@ pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l>; - wake-on-bt { + wake_on_bt: wake-on-bt { label = "Wake-on-Bluetooth"; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; @@ -512,17 +285,14 @@ status = "okay"; }; - sound { + sound: sound { compatible = "rockchip,rk3399-gru-sound"; rockchip,cpu = <&i2s0 &i2s2>; - rockchip,codec = <&max98357a &headsetcodec - &codec &wacky_spi_audio &cdn_dp>; }; }; &cdn_dp { status = "okay"; - extcon = <&usbc_extcon0>, <&usbc_extcon1>; }; /* @@ -613,22 +383,6 @@ status = "okay"; }; -ap_i2c_mic: &i2c1 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - headsetcodec: rt5514@57 { - compatible = "realtek,rt5514"; - reg = <0x57>; - realtek,dmic-init-delay-ms = <20>; - }; -}; - ap_i2c_ts: &i2c3 { status = "okay"; @@ -639,24 +393,6 @@ ap_i2c_ts: &i2c3 { i2c-scl-rising-time-ns = <300>; }; -ap_i2c_tp: &i2c5 { - status = "okay"; - - clock-frequency = <400000>; - - /* These are relatively safe rise/fall times */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - /* - * Note strange pullup enable. Apparently this avoids leakage but - * still allows us to get nice 4.7K pullups for high speed i2c - * transfers. Basically we want the pullup on whenever the ap is - * alive, so the "en" pin just gets set to output high. - */ - pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; -}; - ap_i2c_audio: &i2c8 { status = "okay"; @@ -730,17 +466,6 @@ ap_i2c_audio: &i2c8 { #address-cells = <3>; #size-cells = <2>; ranges; - - mvl_wifi: wifi@0,0 { - compatible = "pci1b4b,2b42"; - reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 - 0x83010000 0x0 0x00100000 0x0 0x00100000>; - interrupt-parent = <&gpio0>; - interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_host_wake_l>; - wakeup-source; - }; }; }; @@ -830,18 +555,6 @@ ap_i2c_audio: &i2c8 { &spi2 { status = "okay"; - - wacky_spi_audio: spi2@0 { - compatible = "realtek,rt5514"; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&mic_int>; - /* May run faster once verified. */ - spi-max-frequency = <10000000>; - wakeup-source; - }; }; &spi5 { @@ -863,24 +576,12 @@ ap_i2c_audio: &i2c8 { #size-cells = <0>; }; - cros_ec_pwm: ec-pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; - }; - usbc_extcon0: extcon@0 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <0>; #extcon-cells = <0>; }; - - usbc_extcon1: extcon@1 { - compatible = "google,extcon-usbc-cros-ec"; - google,usb-port-id = <1>; - - #extcon-cells = <0>; - }; }; }; @@ -896,19 +597,10 @@ ap_i2c_audio: &i2c8 { extcon = <&usbc_extcon0>; }; -&tcphy1 { - status = "okay"; - extcon = <&usbc_extcon1>; -}; - &u2phy0 { status = "okay"; }; -&u2phy1 { - status = "okay"; -}; - &u2phy0_host { status = "okay"; }; @@ -929,22 +621,10 @@ ap_i2c_audio: &i2c8 { status = "okay"; }; -&usb_host0_ehci { - status = "okay"; -}; - &usb_host0_ohci { status = "okay"; }; -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - &usbdrd3_0 { status = "okay"; extcon = <&usbc_extcon0>; @@ -955,16 +635,6 @@ ap_i2c_audio: &i2c8 { dr_mode = "host"; }; -&usbdrd3_1 { - status = "okay"; - extcon = <&usbc_extcon1>; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - &vopb { status = "okay"; }; @@ -1023,26 +693,6 @@ ap_i2c_audio: &i2c8 { }; discrete-regulators { - pp1500_en: pp1500-en { - rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - pp1800_audio_en: pp1800-audio-en { - rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO - &pcfg_pull_down>; - }; - - pp3300_disp_en: pp3300-disp-en { - rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - - pp3000_en: pp3000-en { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO - &pcfg_pull_none>; - }; - sd_io_pwr_en: sd-io-pwr-en { rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO &pcfg_pull_none>; @@ -1057,11 +707,6 @@ ap_i2c_audio: &i2c8 { rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO &pcfg_pull_none>; }; - - wlan_module_pd_l: wlan-module-pd-l { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO - &pcfg_pull_down>; - }; }; codec { @@ -1168,11 +813,7 @@ ap_i2c_audio: &i2c8 { }; }; - wifi { - wifi_perst_l: wifi-perst-l { - rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; - }; - + wifi: wifi { wlan_module_reset_l: wlan-module-reset-l { rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi index d8a120f945c8..69cc9b05baa5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index 81617bcf2522..d6f1095abb04 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index e0afdd8b62bd..e0d64f862322 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 14a0f1998639..0130b9f98c9d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/pwm/pwm.h> @@ -439,7 +402,6 @@ pinctrl-0 = <&i2s0_2ch_bus>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index ad7548d3b93d..fef2c0608999 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -186,7 +149,6 @@ &i2s0 { rockchip,playback-channels = <8>; rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; status = "okay"; }; @@ -235,6 +197,5 @@ &spdif { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 941b627094d7..36b60791c156 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "dt-bindings/pwm/pwm.h" @@ -227,6 +190,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -458,7 +425,6 @@ }; &i2s2 { - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index e0040b648f43..c88e603396f6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rk3399-cru.h> @@ -108,8 +71,8 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -119,6 +82,7 @@ reg = <0x0 0x1>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -128,6 +92,7 @@ reg = <0x0 0x2>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -137,6 +102,7 @@ reg = <0x0 0x3>; enable-method = "psci"; clocks = <&cru ARMCLKL>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <100>; }; @@ -145,8 +111,8 @@ compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - #cooling-cells = <2>; /* min followed by max */ clocks = <&cru ARMCLKB>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; }; @@ -156,6 +122,7 @@ reg = <0x0 0x101>; enable-method = "psci"; clocks = <&cru ARMCLKB>; + #cooling-cells = <2>; /* min followed by max */ dynamic-power-coefficient = <436>; }; }; @@ -1446,10 +1413,6 @@ <&cru SRST_P_UPHY0_TCPHY>; reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; rockchip,grf = <&grf>; - rockchip,typec-conn-dir = <0xe580 0 16>; - rockchip,usb3tousb2-en = <0xe580 3 19>; - rockchip,external-psm = <0xe588 14 30>; - rockchip,pipe-status = <0xe5c0 0 0>; status = "disabled"; tcphy0_dp: dp-port { @@ -1475,10 +1438,6 @@ <&cru SRST_P_UPHY1_TCPHY>; reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; rockchip,grf = <&grf>; - rockchip,typec-conn-dir = <0xe58c 0 16>; - rockchip,usb3tousb2-en = <0xe58c 3 19>; - rockchip,external-psm = <0xe594 14 30>; - rockchip,pipe-status = <0xe5c0 16 16>; status = "disabled"; tcphy1_dp: dp-port { @@ -1516,6 +1475,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spdif_bus>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1531,6 +1491,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2s0_8ch_bus>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1545,6 +1506,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2s1_2ch_bus>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1557,6 +1519,7 @@ clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; power-domains = <&power RK3399_PD_SDIOAUDIO>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1698,6 +1661,21 @@ status = "disabled"; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "hdmi-sound"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s2>; + }; + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + hdmi: hdmi@ff940000 { compatible = "rockchip,rk3399-dw-hdmi"; reg = <0x0 0xff940000 0x0 0x20000>; @@ -1711,6 +1689,7 @@ power-domains = <&power RK3399_PD_HDCP>; reg-io-width = <4>; rockchip,grf = <&grf>; + #sound-dai-cells = <0>; status = "disabled"; ports { @@ -1936,19 +1915,49 @@ drive-strength = <12>; }; + pcfg_pull_none_13ma: pcfg-pull-none-13ma { + bias-disable; + drive-strength = <13>; + }; + + pcfg_pull_none_18ma: pcfg-pull-none-18ma { + bias-disable; + drive-strength = <18>; + }; + + pcfg_pull_none_20ma: pcfg-pull-none-20ma { + bias-disable; + drive-strength = <20>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + pcfg_pull_up_8ma: pcfg-pull-up-8ma { bias-pull-up; drive-strength = <8>; }; + pcfg_pull_up_18ma: pcfg-pull-up-18ma { + bias-pull-up; + drive-strength = <18>; + }; + + pcfg_pull_up_20ma: pcfg-pull-up-20ma { + bias-pull-up; + drive-strength = <20>; + }; + pcfg_pull_down_4ma: pcfg-pull-down-4ma { bias-pull-down; drive-strength = <4>; }; - pcfg_pull_up_2ma: pcfg-pull-up-2ma { - bias-pull-up; - drive-strength = <2>; + pcfg_pull_down_8ma: pcfg-pull-down-8ma { + bias-pull-down; + drive-strength = <8>; }; pcfg_pull_down_12ma: pcfg-pull-down-12ma { @@ -1956,9 +1965,22 @@ drive-strength = <12>; }; - pcfg_pull_none_13ma: pcfg-pull-none-13ma { - bias-disable; - drive-strength = <13>; + pcfg_pull_down_18ma: pcfg-pull-down-18ma { + bias-pull-down; + drive-strength = <18>; + }; + + pcfg_pull_down_20ma: pcfg-pull-down-20ma { + bias-pull-down; + drive-strength = <20>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; }; clock { @@ -2481,45 +2503,60 @@ pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = - <4 18 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <4 RK_PC2 RK_FUNC_1 &pcfg_pull_down>; }; vop0_pwm_pin: vop0-pwm-pin { rockchip,pins = - <4 18 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + }; + + vop1_pwm_pin: vop1-pwm-pin { + rockchip,pins = + <4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { rockchip,pins = - <4 22 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; }; - vop1_pwm_pin: vop1-pwm-pin { + pwm1_pin_pull_down: pwm1-pin-pull-down { rockchip,pins = - <4 18 RK_FUNC_3 &pcfg_pull_none>; + <4 RK_PC6 RK_FUNC_1 &pcfg_pull_down>; }; }; pwm2 { pwm2_pin: pwm2-pin { rockchip,pins = - <1 19 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; + }; + + pwm2_pin_pull_down: pwm2-pin-pull-down { + rockchip,pins = + <1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>; }; }; pwm3a { pwm3a_pin: pwm3a-pin { rockchip,pins = - <0 6 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; }; }; pwm3b { pwm3b_pin: pwm3b-pin { rockchip,pins = - <1 14 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index ae3b5adf32df..7968d524351b 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -60,6 +60,7 @@ &i2s_port4 &spdif_port0 &comp_spdif_port0>; + hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>; }; spdif-out { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index 7919233c9ce2..1a5e7c24b901 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -60,6 +60,7 @@ &i2s_port4 &spdif_port0 &comp_spdif_port0>; + hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>; }; spdif-out { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 0298bd0d0e1a..caf112629caa 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -58,6 +58,7 @@ clocks = <&sys_clk 32>; enable-method = "psci"; operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; cpu2: cpu@100 { @@ -77,6 +78,7 @@ clocks = <&sys_clk 33>; enable-method = "psci"; operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi index 98d3b4fdb9ad..82bd642d770b 100644 --- a/arch/arm64/boot/dts/sprd/sc2731.dtsi +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi @@ -17,6 +17,28 @@ #address-cells = <1>; #size-cells = <0>; + led-controller@200 { + compatible = "sprd,sc27xx-bltc", "sprd,sc2731-bltc"; + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + label = "red"; + reg = <0x0>; + }; + + led@1 { + label = "green"; + reg = <0x1>; + }; + + led@2 { + label = "blue"; + reg = <0x2>; + }; + }; + rtc@280 { compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc"; reg = <0x280>; @@ -35,6 +57,28 @@ #interrupt-cells = <2>; }; + efuse@380 { + compatible = "sprd,sc27xx-efuse", "sprd,sc2731-efuse"; + reg = <0x380>; + #address-cells = <1>; + #size-cells = <1>; + hwlocks = <&hwlock 12>; + }; + + pmic_adc: adc@480 { + compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc"; + reg = <0x480>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + hwlocks = <&hwlock 4>; + }; + + vibrator@ec8 { + compatible = "sprd,sc27xx-vibrator", "sprd,sc2731-vibrator"; + reg = <0xec8>; + }; + regulators { compatible = "sprd,sc27xx-regulator"; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index e9db9108f3c0..eb6be5675f79 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -146,6 +146,12 @@ clocks = <&ext_32k>; }; + timer@40050020 { + compatible = "sprd,sc9860-suspend-timer"; + reg = <0 0x40050020 0 0x20>; + clocks = <&ext_32k>; + }; + hwlock: hwspinlock@40500000 { compatible = "sprd,hwspinlock-r3p0"; reg = <0 0x40500000 0 0x1000>; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile new file mode 100644 index 000000000000..63e619d0b5b8 --- /dev/null +++ b/arch/arm64/boot/dts/ti/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Make file to build device tree binaries for boards based on +# Texas Instruments Inc processors +# +# Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ +# + +dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi new file mode 100644 index 000000000000..2409344df4fa --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family Main Domain peripherals + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_main { + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x01800000 0x10000>, /* GICD */ + <0x01880000 0x90000>; /* GICR */ + /* + * vcpumntirq: + * virtual CPU interface maintenance interrupt + */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: gic-its@18200000 { + compatible = "arm,gic-v3-its"; + reg = <0x01820000 0x10000>; + msi-controller; + #msi-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi new file mode 100644 index 000000000000..cede1fa0983c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC Family + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Texas Instruments K3 AM654 SoC"; + compatible = "ti,am654"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a53_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + /* Recommendation from GIC500 TRM Table A.3 */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: interconnect@100000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */ + <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */ + <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */ + <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */ + <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */ + /* MCUSS Range */ + <0x28380000 0x00 0x28380000 0x03880000>, + <0x40200000 0x00 0x40200000 0x00900100>, + <0x42040000 0x00 0x42040000 0x03ac2400>, + <0x45100000 0x00 0x45100000 0x00c24000>, + <0x46000000 0x00 0x46000000 0x00200000>, + <0x47000000 0x00 0x47000000 0x00068400>; + + cbass_mcu: interconnect@28380000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/ + <0x40200000 0x40200000 0x00900100>, /* First peripheral window */ + <0x42040000 0x42040000 0x03ac2400>, /* WKUP */ + <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x46000000 0x46000000 0x00200000>, /* CPSW */ + <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */ + + cbass_wakeup: interconnect@42040000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + /* WKUP Basic peripherals */ + ranges = <0x42040000 0x42040000 0x03ac2400>; + }; + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-am65-main.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts new file mode 100644 index 000000000000..af6956fdc13f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am654.dtsi" + +/ { + compatible = "ti,am654-evm", "ti,am654"; + model = "Texas Instruments AM654 Base Board"; + + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "earlycon=ns16550a,mmio32,0x02800000"; + }; + + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + secure_ddr: secure_ddr@9e800000 { + reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi new file mode 100644 index 000000000000..2affa6f6617e --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM6 SoC family in Quad core configuration + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "k3-am65.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1: cluster1 { + core0 { + cpu = <&cpu2>; + }; + + core1 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu2: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_1>; + }; + + cpu3: cpu@101 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_1>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&msmc_l3>; + }; + + L2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index c2a0c00272e2..60f5443f3ef4 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += avnet-ultra96-rev1.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts new file mode 100644 index 000000000000..88aa06fa78a8 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Avnet Ultra96 rev1 + * + * (C) Copyright 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp-zcu100-revC.dts" + +/ { + model = "Avnet Ultra96 Rev1"; + compatible = "avnet,ultra96-rev1", "avnet,ultra96", + "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", + "xlnx,zynqmp"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi deleted file mode 100644 index 9f5eedbc2139..000000000000 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi +++ /dev/null @@ -1,137 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * clock specification for Xilinx ZynqMP ep108 development board - * - * (C) Copyright 2015, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/ { - misc_clk: misc_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - i2c_clk: i2c_clk { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <111111111>; - }; - - sata_clk: sata_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <75000000>; - }; - - clk100: clk100 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - clk600: clk600 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - }; -}; - -&can0 { - clocks = <&misc_clk &misc_clk>; -}; - -&can1 { - clocks = <&misc_clk &misc_clk>; -}; - -&fpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&gem0 { - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; -}; - -&gpio { - clocks = <&misc_clk>; -}; - -&i2c0 { - clocks = <&i2c_clk>; -}; - -&i2c1 { - clocks = <&i2c_clk>; -}; - -&sata { - clocks = <&sata_clk>; -}; - -&sdhci0 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&sdhci1 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&spi0 { - clocks = <&misc_clk &misc_clk>; -}; - -&spi1 { - clocks = <&misc_clk &misc_clk>; -}; - -&uart0 { - clocks = <&misc_clk &misc_clk>; -}; - -&usb0 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&usb1 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&watchdog0 { - clocks= <&misc_clk>; -}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts deleted file mode 100644 index 4b0684911626..000000000000 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ /dev/null @@ -1,154 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * dts file for Xilinx ZynqMP ep108 development board - * - * (C) Copyright 2014 - 2015, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/dts-v1/; - -#include "zynqmp.dtsi" -#include "zynqmp-ep108-clk.dtsi" - -/ { - model = "ZynqMP EP108"; - - aliases { - mmc0 = &sdhci0; - mmc1 = &sdhci1; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; -}; - -&can0 { - status = "okay"; -}; - -&can1 { - status = "okay"; -}; - -&gem0 { - status = "okay"; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - phy0: phy@0 { - reg = <0>; - max-speed = <100>; - }; -}; - -&gpio { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; - }; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <400000>; - eeprom@55 { - compatible = "atmel,24c64"; - reg = <0x55>; - }; -}; - -&sata { - status = "okay"; - ceva,broken-gen2; - /* SATA Phy OOB timing settings */ - ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; - ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; - ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; - ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; - ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; - ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; - ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; - ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; -}; - -&sdhci1 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - num-cs = <1>; - spi0_flash0: spi0_flash0@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - spi0_flash0@0 { - label = "spi0_flash0"; - reg = <0x0 0x100000>; - }; - }; -}; - -&spi1 { - status = "okay"; - num-cs = <1>; - spi1_flash0: spi1_flash0@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - spi1_flash0@0 { - label = "spi1_flash0"; - reg = <0x0 0x100000>; - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "peripheral"; - maximum-speed = "high-speed"; -}; - -&usb1 { - status = "okay"; - dr_mode = "host"; - maximum-speed = "high-speed"; -}; - -&watchdog0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index 3e862a9faf26..eb5e8bddb610 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -44,8 +44,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw4 { label = "sw4"; @@ -89,12 +87,6 @@ gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - - bt_power { - label = "bt_power"; - gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; }; wmmcsdio_fixed: fixedregulator-mmcsdio { @@ -267,6 +259,10 @@ &uart0 { status = "okay"; + bluetooth { + compatible = "ti,wl1831-st"; + enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; }; &uart1 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 5b4ffe646a9b..25dd57485323 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -41,8 +41,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw19 { label = "sw19"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 668f7f26716a..259f21b0c001 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -41,8 +41,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw19 { label = "sw19"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index 9a9dd6a0142b..a61b3cc6f4c9 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -41,8 +41,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw19 { label = "sw19"; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 514787d45dee..f67e8d5e93ad 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -179,6 +179,7 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_MARVELL=y +CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m @@ -295,6 +296,8 @@ CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_MVEBU_UART=y CONFIG_SERIAL_DEV_BUS=y CONFIG_VIRTIO_CONSOLE=y +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y @@ -349,10 +352,12 @@ CONFIG_POWER_RESET_MSM=y CONFIG_POWER_RESET_XGENE=y CONFIG_POWER_RESET_SYSCON=y CONFIG_SYSCON_REBOOT_MODE=y +CONFIG_BATTERY_SBS=m CONFIG_BATTERY_BQ27XXX=y CONFIG_SENSORS_ARM_SCPI=y CONFIG_SENSORS_LM90=m CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y @@ -365,12 +370,14 @@ CONFIG_TEGRA_BPMP_THERMAL=m CONFIG_QCOM_TSENS=y CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_MESON_GXBB_WATCHDOG=m CONFIG_MESON_WATCHDOG=m CONFIG_RENESAS_WDT=y CONFIG_UNIPHIER_WATCHDOG=y CONFIG_BCM2835_WDT=y +CONFIG_MFD_BD9571MWV=y CONFIG_MFD_AXP20X_RSB=y CONFIG_MFD_CROS_EC=y CONFIG_CROS_EC_I2C=y @@ -385,6 +392,7 @@ CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_BD9571MWV=y CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI6421V530=y @@ -395,6 +403,7 @@ CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_S2MPS11=y +CONFIG_REGULATOR_VCTRL=m CONFIG_RC_CORE=m CONFIG_RC_DECODERS=y CONFIG_RC_DEVICES=y @@ -407,6 +416,8 @@ CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y # CONFIG_DVB_NET is not set CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m @@ -448,9 +459,20 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_BCM2835_SOC_I2S=m +CONFIG_SND_SOC_ROCKCHIP=m +CONFIG_SND_SOC_ROCKCHIP_I2S=m +CONFIG_SND_SOC_ROCKCHIP_SPDIF=m +CONFIG_SND_SOC_ROCKCHIP_RT5645=m +CONFIG_SND_SOC_RK3399_GRU_SOUND=m CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_AK4613=m +CONFIG_SND_SOC_DA7219=m +CONFIG_SND_SOC_MAX98357A=m +CONFIG_SND_SOC_RL6231=m +CONFIG_SND_SOC_RT5514=m +CONFIG_SND_SOC_RT5514_SPI=m +CONFIG_SND_SOC_RT5645=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m CONFIG_I2C_HID=m @@ -617,6 +639,7 @@ CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_PCIE=m CONFIG_PHY_ROCKCHIP_TYPEC=y CONFIG_PHY_TEGRA_XUSB=y +CONFIG_HISI_PMU=y CONFIG_QCOM_L2_PMU=y CONFIG_QCOM_L3_PMU=y CONFIG_QCOM_QFPROM=y diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2af13b162e5e..35511999156a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -33,6 +33,7 @@ config MIPS select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL select HANDLE_DOMAIN_IRQ + select HAVE_ARCH_COMPILER_H select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_KGDB select HAVE_ARCH_MMAP_RND_BITS if MMU diff --git a/arch/mips/include/asm/asm-prototypes.h b/arch/mips/include/asm/asm-prototypes.h index 576f1a62dea9..f901ed043c71 100644 --- a/arch/mips/include/asm/asm-prototypes.h +++ b/arch/mips/include/asm/asm-prototypes.h @@ -5,3 +5,4 @@ #include <asm-generic/asm-prototypes.h> #include <linux/uaccess.h> #include <asm/ftrace.h> +#include <asm/mmu_context.h> diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index 0269b3de8b51..d4ea7a5b60cf 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -122,8 +122,8 @@ static __inline__ int atomic_fetch_##op##_relaxed(int i, atomic_t * v) \ " " #asm_op " %0, %1, %3 \n" \ " sc %0, %2 \n" \ "\t" __scbeqz " %0, 1b \n" \ - " move %0, %1 \n" \ " .set mips0 \n" \ + " move %0, %1 \n" \ : "=&r" (result), "=&r" (temp), \ "+" GCC_OFF_SMALL_ASM() (v->counter) \ : "Ir" (i)); \ @@ -190,9 +190,11 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) __asm__ __volatile__( " .set "MIPS_ISA_LEVEL" \n" "1: ll %1, %2 # atomic_sub_if_positive\n" + " .set mips0 \n" " subu %0, %1, %3 \n" " move %1, %0 \n" " bltz %0, 1f \n" + " .set "MIPS_ISA_LEVEL" \n" " sc %1, %2 \n" "\t" __scbeqz " %1, 1b \n" "1: \n" diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h index e081a265f422..cc2eb1b06050 100644 --- a/arch/mips/include/asm/compiler.h +++ b/arch/mips/include/asm/compiler.h @@ -8,6 +8,41 @@ #ifndef _ASM_COMPILER_H #define _ASM_COMPILER_H +/* + * With GCC 4.5 onwards we can use __builtin_unreachable to indicate to the + * compiler that a particular code path will never be hit. This allows it to be + * optimised out of the generated binary. + * + * Unfortunately at least GCC 4.6.3 through 7.3.0 inclusive suffer from a bug + * that can lead to instructions from beyond an unreachable statement being + * incorrectly reordered into earlier delay slots if the unreachable statement + * is the only content of a case in a switch statement. This can lead to + * seemingly random behaviour, such as invalid memory accesses from incorrectly + * reordered loads or stores. See this potential GCC fix for details: + * + * https://gcc.gnu.org/ml/gcc-patches/2015-09/msg00360.html + * + * It is unclear whether GCC 8 onwards suffer from the same issue - nothing + * relevant is mentioned in GCC 8 release notes and nothing obviously relevant + * stands out in GCC commit logs, but these newer GCC versions generate very + * different code for the testcase which doesn't exhibit the bug. + * + * GCC also handles stack allocation suboptimally when calling noreturn + * functions or calling __builtin_unreachable(): + * + * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365 + * + * We work around both of these issues by placing a volatile asm statement, + * which GCC is prevented from reordering past, prior to __builtin_unreachable + * calls. + * + * The .insn statement is required to ensure that any branches to the + * statement, which sadly must be kept due to the asm statement, are known to + * be branches to code and satisfy linker requirements for microMIPS kernels. + */ +#undef barrier_before_unreachable +#define barrier_before_unreachable() asm volatile(".insn") + #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) #define GCC_IMM_ASM() "n" #define GCC_REG_ACCUM "$0" diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index b509371a6b0c..94414561de0e 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -32,6 +32,7 @@ do { \ } while (0) extern void tlbmiss_handler_setup_pgd(unsigned long); +extern char tlbmiss_handler_setup_pgd_end[]; /* Note: This is also implemented with uasm in arch/mips/kvm/entry.c */ #define TLBMISS_HANDLER_SETUP_PGD(pgd) \ diff --git a/arch/mips/include/asm/tlbex.h b/arch/mips/include/asm/tlbex.h index 4ed7ebed3bf1..6d97e23f30ab 100644 --- a/arch/mips/include/asm/tlbex.h +++ b/arch/mips/include/asm/tlbex.h @@ -24,4 +24,13 @@ void build_tlb_write_entry(u32 **p, struct uasm_label **l, struct uasm_reloc **r, enum tlb_write_entry wmode); +extern void handle_tlbl(void); +extern char handle_tlbl_end[]; + +extern void handle_tlbs(void); +extern char handle_tlbs_end[]; + +extern void handle_tlbm(void); +extern char handle_tlbm_end[]; + #endif /* __ASM_TLBEX_H */ diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index f8871d5b7eb3..9dab0ed1b227 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -67,14 +67,12 @@ #include <asm/mmu_context.h> #include <asm/types.h> #include <asm/stacktrace.h> +#include <asm/tlbex.h> #include <asm/uasm.h> extern void check_wait(void); extern asmlinkage void rollback_handle_int(void); extern asmlinkage void handle_int(void); -extern u32 handle_tlbl[]; -extern u32 handle_tlbs[]; -extern u32 handle_tlbm[]; extern asmlinkage void handle_adel(void); extern asmlinkage void handle_ades(void); extern asmlinkage void handle_ibe(void); diff --git a/arch/mips/lib/multi3.c b/arch/mips/lib/multi3.c index 111ad475aa0c..4c2483f410c2 100644 --- a/arch/mips/lib/multi3.c +++ b/arch/mips/lib/multi3.c @@ -4,12 +4,12 @@ #include "libgcc.h" /* - * GCC 7 suboptimally generates __multi3 calls for mips64r6, so for that - * specific case only we'll implement it here. + * GCC 7 & older can suboptimally generate __multi3 calls for mips64r6, so for + * that specific case only we implement that intrinsic here. * * See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82981 */ -#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPSR6) && (__GNUC__ == 7) +#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPSR6) && (__GNUC__ < 8) /* multiply 64-bit values, low 64-bits returned */ static inline long long notrace dmulu(long long a, long long b) diff --git a/arch/mips/mm/tlb-funcs.S b/arch/mips/mm/tlb-funcs.S index a5427c6e9757..00fef578c8cd 100644 --- a/arch/mips/mm/tlb-funcs.S +++ b/arch/mips/mm/tlb-funcs.S @@ -12,16 +12,17 @@ * Copyright (C) 2012 Ralf Baechle <ralf@linux-mips.org> */ #include <asm/asm.h> +#include <asm/export.h> #include <asm/regdef.h> #define FASTPATH_SIZE 128 -EXPORT(tlbmiss_handler_setup_pgd_start) LEAF(tlbmiss_handler_setup_pgd) 1: j 1b /* Dummy, will be replaced. */ .space 64 END(tlbmiss_handler_setup_pgd) EXPORT(tlbmiss_handler_setup_pgd_end) +EXPORT_SYMBOL_GPL(tlbmiss_handler_setup_pgd) LEAF(handle_tlbm) .space FASTPATH_SIZE * 4 diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 49312a14cd17..067714291643 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -31,6 +31,7 @@ #include <asm/cacheflush.h> #include <asm/cpu-type.h> +#include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/war.h> #include <asm/uasm.h> @@ -253,8 +254,10 @@ static void output_pgtable_bits_defines(void) pr_debug("\n"); } -static inline void dump_handler(const char *symbol, const u32 *handler, int count) +static inline void dump_handler(const char *symbol, const void *start, const void *end) { + unsigned int count = (end - start) / sizeof(u32); + const u32 *handler = start; int i; pr_debug("LEAF(%s)\n", symbol); @@ -402,12 +405,6 @@ static void build_restore_work_registers(u32 **p) * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current, * we cannot do r3000 under these circumstances. * - * Declare pgd_current here instead of including mmu_context.h to avoid type - * conflicts for tlbmiss_handler_setup_pgd - */ -extern unsigned long pgd_current[]; - -/* * The R3000 TLB handler is simple. */ static void build_r3000_tlb_refill_handler(void) @@ -444,8 +441,7 @@ static void build_r3000_tlb_refill_handler(void) memcpy((void *)ebase, tlb_handler, 0x80); local_flush_icache_range(ebase, ebase + 0x80); - - dump_handler("r3000_tlb_refill", (u32 *)ebase, 32); + dump_handler("r3000_tlb_refill", (u32 *)ebase, (u32 *)(ebase + 0x80)); } #endif /* CONFIG_MIPS_PGD_C0_CONTEXT */ @@ -1465,8 +1461,7 @@ static void build_r4000_tlb_refill_handler(void) memcpy((void *)ebase, final_handler, 0x100); local_flush_icache_range(ebase, ebase + 0x100); - - dump_handler("r4000_tlb_refill", (u32 *)ebase, 64); + dump_handler("r4000_tlb_refill", (u32 *)ebase, (u32 *)(ebase + 0x100)); } static void setup_pw(void) @@ -1568,31 +1563,21 @@ static void build_loongson3_tlb_refill_handler(void) uasm_resolve_relocs(relocs, labels); memcpy((void *)(ebase + 0x80), tlb_handler, 0x80); local_flush_icache_range(ebase + 0x80, ebase + 0x100); - dump_handler("loongson3_tlb_refill", (u32 *)(ebase + 0x80), 32); + dump_handler("loongson3_tlb_refill", + (u32 *)(ebase + 0x80), (u32 *)(ebase + 0x100)); } -extern u32 handle_tlbl[], handle_tlbl_end[]; -extern u32 handle_tlbs[], handle_tlbs_end[]; -extern u32 handle_tlbm[], handle_tlbm_end[]; -extern u32 tlbmiss_handler_setup_pgd_start[]; -extern u32 tlbmiss_handler_setup_pgd[]; -EXPORT_SYMBOL_GPL(tlbmiss_handler_setup_pgd); -extern u32 tlbmiss_handler_setup_pgd_end[]; - static void build_setup_pgd(void) { const int a0 = 4; const int __maybe_unused a1 = 5; const int __maybe_unused a2 = 6; - u32 *p = tlbmiss_handler_setup_pgd_start; - const int tlbmiss_handler_setup_pgd_size = - tlbmiss_handler_setup_pgd_end - tlbmiss_handler_setup_pgd_start; + u32 *p = (u32 *)msk_isa16_mode((ulong)tlbmiss_handler_setup_pgd); #ifndef CONFIG_MIPS_PGD_C0_CONTEXT long pgdc = (long)pgd_current; #endif - memset(tlbmiss_handler_setup_pgd, 0, tlbmiss_handler_setup_pgd_size * - sizeof(tlbmiss_handler_setup_pgd[0])); + memset(p, 0, tlbmiss_handler_setup_pgd_end - (char *)p); memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); pgd_reg = allocate_kscratch(); @@ -1645,15 +1630,15 @@ static void build_setup_pgd(void) else uasm_i_nop(&p); #endif - if (p >= tlbmiss_handler_setup_pgd_end) + if (p >= (u32 *)tlbmiss_handler_setup_pgd_end) panic("tlbmiss_handler_setup_pgd space exceeded"); uasm_resolve_relocs(relocs, labels); pr_debug("Wrote tlbmiss_handler_setup_pgd (%u instructions).\n", - (unsigned int)(p - tlbmiss_handler_setup_pgd)); + (unsigned int)(p - (u32 *)tlbmiss_handler_setup_pgd)); dump_handler("tlbmiss_handler", tlbmiss_handler_setup_pgd, - tlbmiss_handler_setup_pgd_size); + tlbmiss_handler_setup_pgd_end); } static void @@ -1922,12 +1907,11 @@ build_r3000_tlbchange_handler_head(u32 **p, unsigned int pte, static void build_r3000_tlb_load_handler(void) { - u32 *p = handle_tlbl; - const int handle_tlbl_size = handle_tlbl_end - handle_tlbl; + u32 *p = (u32 *)handle_tlbl; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; - memset(handle_tlbl, 0, handle_tlbl_size * sizeof(handle_tlbl[0])); + memset(p, 0, handle_tlbl_end - (char *)p); memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); @@ -1941,24 +1925,23 @@ static void build_r3000_tlb_load_handler(void) uasm_i_j(&p, (unsigned long)tlb_do_page_fault_0 & 0x0fffffff); uasm_i_nop(&p); - if (p >= handle_tlbl_end) + if (p >= (u32 *)handle_tlbl_end) panic("TLB load handler fastpath space exceeded"); uasm_resolve_relocs(relocs, labels); pr_debug("Wrote TLB load handler fastpath (%u instructions).\n", - (unsigned int)(p - handle_tlbl)); + (unsigned int)(p - (u32 *)handle_tlbl)); - dump_handler("r3000_tlb_load", handle_tlbl, handle_tlbl_size); + dump_handler("r3000_tlb_load", handle_tlbl, handle_tlbl_end); } static void build_r3000_tlb_store_handler(void) { - u32 *p = handle_tlbs; - const int handle_tlbs_size = handle_tlbs_end - handle_tlbs; + u32 *p = (u32 *)handle_tlbs; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; - memset(handle_tlbs, 0, handle_tlbs_size * sizeof(handle_tlbs[0])); + memset(p, 0, handle_tlbs_end - (char *)p); memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); @@ -1972,24 +1955,23 @@ static void build_r3000_tlb_store_handler(void) uasm_i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff); uasm_i_nop(&p); - if (p >= handle_tlbs_end) + if (p >= (u32 *)handle_tlbs_end) panic("TLB store handler fastpath space exceeded"); uasm_resolve_relocs(relocs, labels); pr_debug("Wrote TLB store handler fastpath (%u instructions).\n", - (unsigned int)(p - handle_tlbs)); + (unsigned int)(p - (u32 *)handle_tlbs)); - dump_handler("r3000_tlb_store", handle_tlbs, handle_tlbs_size); + dump_handler("r3000_tlb_store", handle_tlbs, handle_tlbs_end); } static void build_r3000_tlb_modify_handler(void) { - u32 *p = handle_tlbm; - const int handle_tlbm_size = handle_tlbm_end - handle_tlbm; + u32 *p = (u32 *)handle_tlbm; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; - memset(handle_tlbm, 0, handle_tlbm_size * sizeof(handle_tlbm[0])); + memset(p, 0, handle_tlbm_end - (char *)p); memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); @@ -2003,14 +1985,14 @@ static void build_r3000_tlb_modify_handler(void) uasm_i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff); uasm_i_nop(&p); - if (p >= handle_tlbm_end) + if (p >= (u32 *)handle_tlbm_end) panic("TLB modify handler fastpath space exceeded"); uasm_resolve_relocs(relocs, labels); pr_debug("Wrote TLB modify handler fastpath (%u instructions).\n", - (unsigned int)(p - handle_tlbm)); + (unsigned int)(p - (u32 *)handle_tlbm)); - dump_handler("r3000_tlb_modify", handle_tlbm, handle_tlbm_size); + dump_handler("r3000_tlb_modify", handle_tlbm, handle_tlbm_end); } #endif /* CONFIG_MIPS_PGD_C0_CONTEXT */ @@ -2102,12 +2084,11 @@ build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l, static void build_r4000_tlb_load_handler(void) { u32 *p = (u32 *)msk_isa16_mode((ulong)handle_tlbl); - const int handle_tlbl_size = handle_tlbl_end - handle_tlbl; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; struct work_registers wr; - memset(handle_tlbl, 0, handle_tlbl_size * sizeof(handle_tlbl[0])); + memset(p, 0, handle_tlbl_end - (char *)p); memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); @@ -2288,25 +2269,24 @@ static void build_r4000_tlb_load_handler(void) uasm_i_j(&p, (unsigned long)tlb_do_page_fault_0 & 0x0fffffff); uasm_i_nop(&p); - if (p >= handle_tlbl_end) + if (p >= (u32 *)handle_tlbl_end) panic("TLB load handler fastpath space exceeded"); uasm_resolve_relocs(relocs, labels); pr_debug("Wrote TLB load handler fastpath (%u instructions).\n", - (unsigned int)(p - handle_tlbl)); + (unsigned int)(p - (u32 *)handle_tlbl)); - dump_handler("r4000_tlb_load", handle_tlbl, handle_tlbl_size); + dump_handler("r4000_tlb_load", handle_tlbl, handle_tlbl_end); } static void build_r4000_tlb_store_handler(void) { u32 *p = (u32 *)msk_isa16_mode((ulong)handle_tlbs); - const int handle_tlbs_size = handle_tlbs_end - handle_tlbs; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; struct work_registers wr; - memset(handle_tlbs, 0, handle_tlbs_size * sizeof(handle_tlbs[0])); + memset(p, 0, handle_tlbs_end - (char *)p); memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); @@ -2343,25 +2323,24 @@ static void build_r4000_tlb_store_handler(void) uasm_i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff); uasm_i_nop(&p); - if (p >= handle_tlbs_end) + if (p >= (u32 *)handle_tlbs_end) panic("TLB store handler fastpath space exceeded"); uasm_resolve_relocs(relocs, labels); pr_debug("Wrote TLB store handler fastpath (%u instructions).\n", - (unsigned int)(p - handle_tlbs)); + (unsigned int)(p - (u32 *)handle_tlbs)); - dump_handler("r4000_tlb_store", handle_tlbs, handle_tlbs_size); + dump_handler("r4000_tlb_store", handle_tlbs, handle_tlbs_end); } static void build_r4000_tlb_modify_handler(void) { u32 *p = (u32 *)msk_isa16_mode((ulong)handle_tlbm); - const int handle_tlbm_size = handle_tlbm_end - handle_tlbm; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; struct work_registers wr; - memset(handle_tlbm, 0, handle_tlbm_size * sizeof(handle_tlbm[0])); + memset(p, 0, handle_tlbm_end - (char *)p); memset(labels, 0, sizeof(labels)); memset(relocs, 0, sizeof(relocs)); @@ -2399,14 +2378,14 @@ static void build_r4000_tlb_modify_handler(void) uasm_i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff); uasm_i_nop(&p); - if (p >= handle_tlbm_end) + if (p >= (u32 *)handle_tlbm_end) panic("TLB modify handler fastpath space exceeded"); uasm_resolve_relocs(relocs, labels); pr_debug("Wrote TLB modify handler fastpath (%u instructions).\n", - (unsigned int)(p - handle_tlbm)); + (unsigned int)(p - (u32 *)handle_tlbm)); - dump_handler("r4000_tlb_modify", handle_tlbm, handle_tlbm_size); + dump_handler("r4000_tlb_modify", handle_tlbm, handle_tlbm_end); } static void flush_tlb_handlers(void) diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index ed5f32d8fbd8..e0081e734827 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -6,6 +6,8 @@ config OPENRISC def_bool y + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select DMA_NONCOHERENT_OPS select OF select OF_EARLY_FLATTREE select IRQ_DOMAIN diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild index 65964d390b10..eb87cd8327c8 100644 --- a/arch/openrisc/include/asm/Kbuild +++ b/arch/openrisc/include/asm/Kbuild @@ -7,6 +7,7 @@ generic-y += current.h generic-y += device.h generic-y += div64.h generic-y += dma.h +generic-y += dma-mapping.h generic-y += emergency-restart.h generic-y += exec.h generic-y += extable.h diff --git a/arch/openrisc/include/asm/dma-mapping.h b/arch/openrisc/include/asm/dma-mapping.h deleted file mode 100644 index e212a1f0b6d2..000000000000 --- a/arch/openrisc/include/asm/dma-mapping.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * OpenRISC Linux - * - * Linux architectural port borrowing liberally from similar works of - * others. All original copyrights apply as per the original source - * declaration. - * - * OpenRISC implementation: - * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __ASM_OPENRISC_DMA_MAPPING_H -#define __ASM_OPENRISC_DMA_MAPPING_H - -/* - * See Documentation/DMA-API-HOWTO.txt and - * Documentation/DMA-API.txt for documentation. - */ - -#include <linux/dma-debug.h> -#include <linux/dma-mapping.h> - -extern const struct dma_map_ops or1k_dma_map_ops; - -static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) -{ - return &or1k_dma_map_ops; -} - -#endif /* __ASM_OPENRISC_DMA_MAPPING_H */ diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c index ec7fd45704d2..159336adfa2f 100644 --- a/arch/openrisc/kernel/dma.c +++ b/arch/openrisc/kernel/dma.c @@ -19,9 +19,7 @@ * the only thing implemented properly. The rest need looking into... */ -#include <linux/dma-mapping.h> -#include <linux/dma-debug.h> -#include <linux/export.h> +#include <linux/dma-noncoherent.h> #include <asm/cpuinfo.h> #include <asm/spr_defs.h> @@ -80,10 +78,9 @@ page_clear_nocache(pte_t *pte, unsigned long addr, * is being ignored for now; uncached but write-combined memory is a * missing feature of the OR1K. */ -static void * -or1k_dma_alloc(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp, - unsigned long attrs) +void * +arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t gfp, unsigned long attrs) { unsigned long va; void *page; @@ -115,9 +112,9 @@ or1k_dma_alloc(struct device *dev, size_t size, return (void *)va; } -static void -or1k_dma_free(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle, unsigned long attrs) +void +arch_dma_free(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle, unsigned long attrs) { unsigned long va = (unsigned long)vaddr; struct mm_walk walk = { @@ -133,19 +130,12 @@ or1k_dma_free(struct device *dev, size_t size, void *vaddr, free_pages_exact(vaddr, size); } -static dma_addr_t -or1k_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir, - unsigned long attrs) +void arch_sync_dma_for_device(struct device *dev, phys_addr_t addr, size_t size, + enum dma_data_direction dir) { unsigned long cl; - dma_addr_t addr = page_to_phys(page) + offset; struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()]; - if (attrs & DMA_ATTR_SKIP_CPU_SYNC) - return addr; - switch (dir) { case DMA_TO_DEVICE: /* Flush the dcache for the requested range */ @@ -167,83 +157,4 @@ or1k_map_page(struct device *dev, struct page *page, */ break; } - - return addr; -} - -static void -or1k_unmap_page(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction dir, - unsigned long attrs) -{ - /* Nothing special to do here... */ -} - -static int -or1k_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir, - unsigned long attrs) -{ - struct scatterlist *s; - int i; - - for_each_sg(sg, s, nents, i) { - s->dma_address = or1k_map_page(dev, sg_page(s), s->offset, - s->length, dir, 0); - } - - return nents; } - -static void -or1k_unmap_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir, - unsigned long attrs) -{ - struct scatterlist *s; - int i; - - for_each_sg(sg, s, nents, i) { - or1k_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, 0); - } -} - -static void -or1k_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction dir) -{ - unsigned long cl; - dma_addr_t addr = dma_handle; - struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()]; - - /* Invalidate the dcache for the requested range */ - for (cl = addr; cl < addr + size; cl += cpuinfo->dcache_block_size) - mtspr(SPR_DCBIR, cl); -} - -static void -or1k_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction dir) -{ - unsigned long cl; - dma_addr_t addr = dma_handle; - struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()]; - - /* Flush the dcache for the requested range */ - for (cl = addr; cl < addr + size; cl += cpuinfo->dcache_block_size) - mtspr(SPR_DCBFR, cl); -} - -const struct dma_map_ops or1k_dma_map_ops = { - .alloc = or1k_dma_alloc, - .free = or1k_dma_free, - .map_page = or1k_map_page, - .unmap_page = or1k_unmap_page, - .map_sg = or1k_map_sg, - .unmap_sg = or1k_unmap_sg, - .sync_single_for_cpu = or1k_sync_single_for_cpu, - .sync_single_for_device = or1k_sync_single_for_device, -}; -EXPORT_SYMBOL(or1k_dma_map_ops); diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild index 576ffdca06ba..efdbe311e936 100644 --- a/arch/riscv/include/asm/Kbuild +++ b/arch/riscv/include/asm/Kbuild @@ -1,6 +1,7 @@ generic-y += bugs.h generic-y += cacheflush.h generic-y += checksum.h +generic-y += compat.h generic-y += cputime.h generic-y += device.h generic-y += div64.h diff --git a/arch/riscv/include/asm/compat.h b/arch/riscv/include/asm/compat.h deleted file mode 100644 index 044aecff8854..000000000000 --- a/arch/riscv/include/asm/compat.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (C) 2012 ARM Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#ifndef __ASM_COMPAT_H -#define __ASM_COMPAT_H -#ifdef CONFIG_COMPAT - -#if defined(CONFIG_64BIT) -#define COMPAT_UTS_MACHINE "riscv64\0\0" -#elif defined(CONFIG_32BIT) -#define COMPAT_UTS_MACHINE "riscv32\0\0" -#else -#error "Unknown RISC-V base ISA" -#endif - -#endif /*CONFIG_COMPAT*/ -#endif /*__ASM_COMPAT_H*/ diff --git a/arch/riscv/include/asm/unistd.h b/arch/riscv/include/asm/unistd.h index 080fb28061de..0caea01d5cca 100644 --- a/arch/riscv/include/asm/unistd.h +++ b/arch/riscv/include/asm/unistd.h @@ -11,6 +11,11 @@ * GNU General Public License for more details. */ +/* + * There is explicitly no include guard here because this file is expected to + * be included multiple times. See uapi/asm/syscalls.h for more info. + */ + #define __ARCH_WANT_SYS_CLONE #include <uapi/asm/unistd.h> #include <uapi/asm/syscalls.h> diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h index 541544d64c33..ec6180a4b55d 100644 --- a/arch/riscv/include/asm/vdso.h +++ b/arch/riscv/include/asm/vdso.h @@ -38,8 +38,6 @@ struct vdso_data { (void __user *)((unsigned long)(base) + __vdso_##name); \ }) -#ifdef CONFIG_SMP asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t); -#endif #endif /* _ASM_RISCV_VDSO_H */ diff --git a/arch/riscv/include/uapi/asm/syscalls.h b/arch/riscv/include/uapi/asm/syscalls.h index 818655b0d535..206dc4b0f6ea 100644 --- a/arch/riscv/include/uapi/asm/syscalls.h +++ b/arch/riscv/include/uapi/asm/syscalls.h @@ -1,10 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright (C) 2017 SiFive + * Copyright (C) 2017-2018 SiFive */ -#ifndef _ASM__UAPI__SYSCALLS_H -#define _ASM__UAPI__SYSCALLS_H +/* + * There is explicitly no include guard here because this file is expected to + * be included multiple times in order to define the syscall macros via + * __SYSCALL. + */ /* * Allows the instruction cache to be flushed from userspace. Despite RISC-V @@ -20,7 +23,7 @@ * caller. We don't currently do anything with the address range, that's just * in there for forwards compatibility. */ +#ifndef __NR_riscv_flush_icache #define __NR_riscv_flush_icache (__NR_arch_specific_syscall + 15) -__SYSCALL(__NR_riscv_flush_icache, sys_riscv_flush_icache) - #endif +__SYSCALL(__NR_riscv_flush_icache, sys_riscv_flush_icache) diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c index f7181ed8aafc..568026ccf6e8 100644 --- a/arch/riscv/kernel/sys_riscv.c +++ b/arch/riscv/kernel/sys_riscv.c @@ -48,7 +48,6 @@ SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len, } #endif /* !CONFIG_64BIT */ -#ifdef CONFIG_SMP /* * Allows the instruction cache to be flushed from userspace. Despite RISC-V * having a direct 'fence.i' instruction available to userspace (which we @@ -66,15 +65,24 @@ SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len, SYSCALL_DEFINE3(riscv_flush_icache, uintptr_t, start, uintptr_t, end, uintptr_t, flags) { +#ifdef CONFIG_SMP struct mm_struct *mm = current->mm; bool local = (flags & SYS_RISCV_FLUSH_ICACHE_LOCAL) != 0; +#endif /* Check the reserved flags. */ if (unlikely(flags & ~SYS_RISCV_FLUSH_ICACHE_ALL)) return -EINVAL; + /* + * Without CONFIG_SMP flush_icache_mm is a just a flush_icache_all(), + * which generates unused variable warnings all over this function. + */ +#ifdef CONFIG_SMP flush_icache_mm(mm, local); +#else + flush_icache_all(); +#endif return 0; } -#endif diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h index 6b2f90a0b149..ef05bea7010d 100644 --- a/arch/x86/include/asm/xen/hypercall.h +++ b/arch/x86/include/asm/xen/hypercall.h @@ -197,17 +197,6 @@ extern struct { char _entry[32]; } hypercall_page[]; (type)__res; \ }) -#define _hypercall5(type, name, a1, a2, a3, a4, a5) \ -({ \ - __HYPERCALL_DECLS; \ - __HYPERCALL_5ARG(a1, a2, a3, a4, a5); \ - asm volatile (__HYPERCALL \ - : __HYPERCALL_5PARAM \ - : __HYPERCALL_ENTRY(name) \ - : __HYPERCALL_CLOBBER5); \ - (type)__res; \ -}) - static inline long xen_single_call(unsigned int call, unsigned long a1, unsigned long a2, @@ -267,47 +256,12 @@ HYPERVISOR_set_gdt(unsigned long *frame_list, int entries) } static inline int -HYPERVISOR_stack_switch(unsigned long ss, unsigned long esp) -{ - return _hypercall2(int, stack_switch, ss, esp); -} - -#ifdef CONFIG_X86_32 -static inline int -HYPERVISOR_set_callbacks(unsigned long event_selector, - unsigned long event_address, - unsigned long failsafe_selector, - unsigned long failsafe_address) -{ - return _hypercall4(int, set_callbacks, - event_selector, event_address, - failsafe_selector, failsafe_address); -} -#else /* CONFIG_X86_64 */ -static inline int -HYPERVISOR_set_callbacks(unsigned long event_address, - unsigned long failsafe_address, - unsigned long syscall_address) -{ - return _hypercall3(int, set_callbacks, - event_address, failsafe_address, - syscall_address); -} -#endif /* CONFIG_X86_{32,64} */ - -static inline int HYPERVISOR_callback_op(int cmd, void *arg) { return _hypercall2(int, callback_op, cmd, arg); } static inline int -HYPERVISOR_fpu_taskswitch(int set) -{ - return _hypercall1(int, fpu_taskswitch, set); -} - -static inline int HYPERVISOR_sched_op(int cmd, void *arg) { return _hypercall2(int, sched_op, cmd, arg); @@ -419,19 +373,6 @@ HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count) } static inline int -HYPERVISOR_update_va_mapping_otherdomain(unsigned long va, pte_t new_val, - unsigned long flags, domid_t domid) -{ - if (sizeof(new_val) == sizeof(long)) - return _hypercall4(int, update_va_mapping_otherdomain, va, - new_val.pte, flags, domid); - else - return _hypercall5(int, update_va_mapping_otherdomain, va, - new_val.pte, new_val.pte >> 32, - flags, domid); -} - -static inline int HYPERVISOR_vm_assist(unsigned int cmd, unsigned int type) { return _hypercall2(int, vm_assist, cmd, type); @@ -465,12 +406,6 @@ HYPERVISOR_suspend(unsigned long start_info_mfn) return _hypercall3(int, sched_op, SCHEDOP_shutdown, &r, start_info_mfn); } -static inline int -HYPERVISOR_nmi_op(unsigned long op, unsigned long arg) -{ - return _hypercall2(int, nmi_op, op, arg); -} - static inline unsigned long __must_check HYPERVISOR_hvm_op(int op, void *arg) { @@ -529,39 +464,6 @@ MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, } static inline void -MULTI_grant_table_op(struct multicall_entry *mcl, unsigned int cmd, - void *uop, unsigned int count) -{ - mcl->op = __HYPERVISOR_grant_table_op; - mcl->args[0] = cmd; - mcl->args[1] = (unsigned long)uop; - mcl->args[2] = count; - - trace_xen_mc_entry(mcl, 3); -} - -static inline void -MULTI_update_va_mapping_otherdomain(struct multicall_entry *mcl, unsigned long va, - pte_t new_val, unsigned long flags, - domid_t domid) -{ - mcl->op = __HYPERVISOR_update_va_mapping_otherdomain; - mcl->args[0] = va; - if (sizeof(new_val) == sizeof(long)) { - mcl->args[1] = new_val.pte; - mcl->args[2] = flags; - mcl->args[3] = domid; - } else { - mcl->args[1] = new_val.pte; - mcl->args[2] = new_val.pte >> 32; - mcl->args[3] = flags; - mcl->args[4] = domid; - } - - trace_xen_mc_entry(mcl, sizeof(new_val) == sizeof(long) ? 4 : 5); -} - -static inline void MULTI_update_descriptor(struct multicall_entry *mcl, u64 maddr, struct desc_struct desc) { @@ -582,16 +484,6 @@ MULTI_update_descriptor(struct multicall_entry *mcl, u64 maddr, } static inline void -MULTI_memory_op(struct multicall_entry *mcl, unsigned int cmd, void *arg) -{ - mcl->op = __HYPERVISOR_memory_op; - mcl->args[0] = cmd; - mcl->args[1] = (unsigned long)arg; - - trace_xen_mc_entry(mcl, 2); -} - -static inline void MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req, int count, int *success_count, domid_t domid) { @@ -618,16 +510,6 @@ MULTI_mmuext_op(struct multicall_entry *mcl, struct mmuext_op *op, int count, } static inline void -MULTI_set_gdt(struct multicall_entry *mcl, unsigned long *frames, int entries) -{ - mcl->op = __HYPERVISOR_set_gdt; - mcl->args[0] = (unsigned long)frames; - mcl->args[1] = entries; - - trace_xen_mc_entry(mcl, 2); -} - -static inline void MULTI_stack_switch(struct multicall_entry *mcl, unsigned long ss, unsigned long esp) { diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index acfab322fbe0..5c32a7665492 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -99,15 +99,22 @@ __ref void *alloc_low_pages(unsigned int num) } if ((pgt_buf_end + num) > pgt_buf_top || !can_use_brk_pgt) { - unsigned long ret; - if (min_pfn_mapped >= max_pfn_mapped) - panic("alloc_low_pages: ran out of memory"); - ret = memblock_find_in_range(min_pfn_mapped << PAGE_SHIFT, + unsigned long ret = 0; + + if (min_pfn_mapped < max_pfn_mapped) { + ret = memblock_find_in_range( + min_pfn_mapped << PAGE_SHIFT, max_pfn_mapped << PAGE_SHIFT, PAGE_SIZE * num , PAGE_SIZE); + } + if (ret) + memblock_reserve(ret, PAGE_SIZE * num); + else if (can_use_brk_pgt) + ret = __pa(extend_brk(PAGE_SIZE * num, PAGE_SIZE)); + if (!ret) panic("alloc_low_pages: can not alloc memory"); - memblock_reserve(ret, PAGE_SIZE * num); + pfn = ret >> PAGE_SHIFT; } else { pfn = pgt_buf_end; diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index ee3b00c7acda..52a7c3faee0c 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -122,6 +122,8 @@ static void __init xen_banner(void) static void __init xen_pv_init_platform(void) { + populate_extra_pte(fix_to_virt(FIX_PARAVIRT_BOOTMAP)); + set_fixmap(FIX_PARAVIRT_BOOTMAP, xen_start_info->shared_info); HYPERVISOR_shared_info = (void *)fix_to_virt(FIX_PARAVIRT_BOOTMAP); @@ -1170,13 +1172,13 @@ static void __init xen_boot_params_init_edd(void) * we do this, we have to be careful not to call any stack-protected * function, which is most of the kernel. */ -static void xen_setup_gdt(int cpu) +static void __init xen_setup_gdt(int cpu) { pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot; pv_cpu_ops.load_gdt = xen_load_gdt_boot; - setup_stack_canary_segment(0); - switch_to_new_gdt(0); + setup_stack_canary_segment(cpu); + switch_to_new_gdt(cpu); pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry; pv_cpu_ops.load_gdt = xen_load_gdt; @@ -1385,8 +1387,11 @@ asmlinkage __visible void __init xen_start_kernel(void) xen_boot_params_init_edd(); } - add_preferred_console("tty", 0, NULL); + if (!boot_params.screen_info.orig_video_isVGA) + add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); + if (boot_params.screen_info.orig_video_isVGA) + add_preferred_console("tty", 0, NULL); #ifdef CONFIG_PCI /* PCI BIOS service won't work from a PV guest. */ diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c index 3114b7c76970..45b700ac5fe7 100644 --- a/arch/x86/xen/mmu_pv.c +++ b/arch/x86/xen/mmu_pv.c @@ -2172,6 +2172,8 @@ void __init xen_relocate_p2m(void) #else /* !CONFIG_X86_64 */ static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD); static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD); +RESERVE_BRK(fixup_kernel_pmd, PAGE_SIZE); +RESERVE_BRK(fixup_kernel_pte, PAGE_SIZE); static void __init xen_write_cr3_init(unsigned long cr3) { diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 6e0d2086eacb..1163e33121fb 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -906,37 +906,6 @@ char * __init xen_memory_setup(void) } /* - * Machine specific memory setup for auto-translated guests. - */ -char * __init xen_auto_xlated_memory_setup(void) -{ - struct xen_memory_map memmap; - int i; - int rc; - - memmap.nr_entries = ARRAY_SIZE(xen_e820_table.entries); - set_xen_guest_handle(memmap.buffer, xen_e820_table.entries); - - rc = HYPERVISOR_memory_op(XENMEM_memory_map, &memmap); - if (rc < 0) - panic("No memory map (%d)\n", rc); - - xen_e820_table.nr_entries = memmap.nr_entries; - - e820__update_table(&xen_e820_table); - - for (i = 0; i < xen_e820_table.nr_entries; i++) - e820__range_add(xen_e820_table.entries[i].addr, xen_e820_table.entries[i].size, xen_e820_table.entries[i].type); - - /* Remove p2m info, it is not needed. */ - xen_start_info->mfn_list = 0; - xen_start_info->first_p2m_pfn = 0; - xen_start_info->nr_p2m_frames = 0; - - return "Xen"; -} - -/* * Set the bit indicating "nosegneg" library variants should be used. * We only need to bother in pure 32-bit mode; compat 32-bit processes * can have un-truncated segments, so wrapping around is allowed. diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index e78684597f57..0e60bd918695 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -50,7 +50,6 @@ void __init xen_inv_extra_mem(void); void __init xen_remap_memory(void); phys_addr_t __init xen_find_free_area(phys_addr_t size); char * __init xen_memory_setup(void); -char * xen_auto_xlated_memory_setup(void); void __init xen_arch_setup(void); void xen_enable_sysenter(void); void xen_enable_syscall(void); |