diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/m68k/include/asm/io_no.h | 99 |
1 files changed, 84 insertions, 15 deletions
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h index 42d61d4f4b86..ccb8c31faf49 100644 --- a/arch/m68k/include/asm/io_no.h +++ b/arch/m68k/include/asm/io_no.h @@ -18,16 +18,95 @@ #define __raw_writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b)) #define __raw_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b)) -#if defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE) +#if defined(CONFIG_COLDFIRE) /* - * Support for PCI bus access uses the asm-generic access functions. - * We need to supply the base address and masks for the normal memory - * and IO address space mappings. + * For ColdFire platforms we may need to do some extra checks for what + * type of address range we are accessing. Include the ColdFire platform + * definitions so we can figure out if need to do something special. */ #include <asm/byteorder.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> +#endif /* CONFIG_COLDFIRE */ + +#if defined(IOMEMBASE) +/* + * The ColdFire SoC internal peripherals are mapped into virtual address + * space using the ACR registers of the cache control unit. This means we + * are using a 1:1 physical:virtual mapping for them. We can quickly + * determine if we are accessing an internal peripheral device given the + * physical or vitrual address using the same range check. This check logic + * applies just the same of there is no MMU but something like a PCI bus + * is present. + */ +static int __cf_internalio(unsigned long addr) +{ + return (addr >= IOMEMBASE) && (addr <= IOMEMBASE + IOMEMSIZE - 1); +} + +static int cf_internalio(const volatile void __iomem *addr) +{ + return __cf_internalio((unsigned long) addr); +} + +/* + * We need to treat built-in peripherals and bus based address ranges + * differently. Local built-in peripherals (and the ColdFire SoC parts + * have quite a lot of them) are always native endian - which is big + * endian on m68k/ColdFire. Bus based address ranges, like the PCI bus, + * are accessed little endian - so we need to byte swap those. + */ +#define readw readw +static inline u16 readw(const volatile void __iomem *addr) +{ + if (cf_internalio(addr)) + return __raw_readw(addr); + return __le16_to_cpu(__raw_readw(addr)); +} + +#define readl readl +static inline u32 readl(const volatile void __iomem *addr) +{ + if (cf_internalio(addr)) + return __raw_readl(addr); + return __le32_to_cpu(__raw_readl(addr)); +} + +#define writew writew +static inline void writew(u16 value, volatile void __iomem *addr) +{ + if (cf_internalio(addr)) + __raw_writew(value, addr); + else + __raw_writew(__cpu_to_le16(value), addr); +} + +#define writel writel +static inline void writel(u32 value, volatile void __iomem *addr) +{ + if (cf_internalio(addr)) + __raw_writel(value, addr); + else + __raw_writel(__cpu_to_le32(value), addr); +} + +#else + +#define readb __raw_readb +#define readw __raw_readw +#define readl __raw_readl +#define writeb __raw_writeb +#define writew __raw_writew +#define writel __raw_writel +#endif /* IOMEMBASE */ + +#if defined(CONFIG_PCI) +/* + * Support for PCI bus access uses the asm-generic access functions. + * We need to supply the base address and masks for the normal memory + * and IO address space mappings. + */ #define PCI_MEM_PA 0xf0000000 /* Host physical address */ #define PCI_MEM_BA 0xf0000000 /* Bus physical address */ #define PCI_MEM_SIZE 0x08000000 /* 128 MB */ @@ -44,17 +123,7 @@ #define PIO_RESERVED 0x10000 #define PCI_IOBASE ((void __iomem *) PCI_IO_PA) #define PCI_SPACE_LIMIT PCI_IO_MASK - -#else - -#define readb __raw_readb -#define readw __raw_readw -#define readl __raw_readl -#define writeb __raw_writeb -#define writew __raw_writew -#define writel __raw_writel - -#endif /* CONFIG_PCI && CONFIG_COLDFIRE */ +#endif /* CONFIG_PCI */ /* * These are defined in kmap.h as static inline functions. To maintain |