diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/boot/compressed/head.S | 18 | ||||
| -rw-r--r-- | arch/arm/include/asm/assembler.h | 4 | ||||
| -rw-r--r-- | arch/arm/include/asm/processor.h | 2 | ||||
| -rw-r--r-- | arch/arm/kernel/head-common.S | 22 | ||||
| -rw-r--r-- | arch/arm/kernel/head.S | 63 | ||||
| -rw-r--r-- | arch/arm/kernel/hyp-stub.S | 27 | ||||
| -rw-r--r-- | arch/arm/kernel/sleep.S | 19 |
7 files changed, 44 insertions, 111 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 2e04ec5b5446..9905fb7560df 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -468,15 +468,10 @@ dtb_check_done: /* * Compute the address of the hyp vectors after relocation. - * This requires some arithmetic since we cannot directly - * reference __hyp_stub_vectors in a PC-relative way. * Call __hyp_set_vectors with the new address so that we * can HVC again after the copy. */ -0: adr r0, 0b - movw r1, #:lower16:__hyp_stub_vectors - 0b - movt r1, #:upper16:__hyp_stub_vectors - 0b - add r0, r0, r1 + adr_l r0, __hyp_stub_vectors sub r0, r0, r5 add r0, r0, r10 bl __hyp_set_vectors @@ -627,17 +622,11 @@ not_relocated: mov r0, #0 cmp r0, #HYP_MODE @ if not booted in HYP mode... bne __enter_kernel @ boot kernel directly - adr r12, .L__hyp_reentry_vectors_offset - ldr r0, [r12] - add r0, r0, r12 - + adr_l r0, __hyp_reentry_vectors bl __hyp_set_vectors __HVC(0) @ otherwise bounce to hyp mode b . @ should never be reached - - .align 2 -.L__hyp_reentry_vectors_offset: .long __hyp_reentry_vectors - . #else b __enter_kernel #endif @@ -1440,8 +1429,7 @@ ENTRY(efi_enter_kernel) mov r4, r0 @ preserve image base mov r8, r1 @ preserve DT pointer - ARM( adrl r0, call_cache_fn ) - THUMB( adr r0, call_cache_fn ) + adr_l r0, call_cache_fn adr r1, 0f @ clean the region of code we bl cache_clean_flush @ may run with the MMU off diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 72627c5fb3b2..6ed30421f697 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -259,7 +259,7 @@ */ #define ALT_UP(instr...) \ .pushsection ".alt.smp.init", "a" ;\ - .long 9998b ;\ + .long 9998b - . ;\ 9997: instr ;\ .if . - 9997b == 2 ;\ nop ;\ @@ -270,7 +270,7 @@ .popsection #define ALT_UP_B(label) \ .pushsection ".alt.smp.init", "a" ;\ - .long 9998b ;\ + .long 9998b - . ;\ W(b) . + (label - 9998b) ;\ .popsection #else diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index b9241051e5cb..9e6b97286307 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -96,7 +96,7 @@ unsigned long get_wchan(struct task_struct *p); #define __ALT_SMP_ASM(smp, up) \ "9998: " smp "\n" \ " .pushsection \".alt.smp.init\", \"a\"\n" \ - " .long 9998b\n" \ + " .long 9998b - .\n" \ " " up "\n" \ " .popsection\n" #else diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 4a3982812a40..9a5ab6c19568 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -170,11 +170,12 @@ ENDPROC(lookup_processor_type) * r9 = cpuid (preserved) */ __lookup_processor_type: - adr r3, __lookup_processor_type_data - ldmia r3, {r4 - r6} - sub r3, r3, r4 @ get offset between virt&phys - add r5, r5, r3 @ convert virt addresses to - add r6, r6, r3 @ physical address space + /* + * Look in <asm/procinfo.h> for information about the __proc_info + * structure. + */ + adr_l r5, __proc_info_begin + adr_l r6, __proc_info_end 1: ldmia r5, {r3, r4} @ value, mask and r4, r4, r9 @ mask wanted bits teq r3, r4 @@ -186,17 +187,6 @@ __lookup_processor_type: 2: ret lr ENDPROC(__lookup_processor_type) -/* - * Look in <asm/procinfo.h> for information about the __proc_info structure. - */ - .align 2 - .type __lookup_processor_type_data, %object -__lookup_processor_type_data: - .long . - .long __proc_info_begin - .long __proc_info_end - .size __lookup_processor_type_data, . - __lookup_processor_type_data - __error_lpae: #ifdef CONFIG_DEBUG_LL adr r0, str_lpae diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 7e3f36809011..ae0b08b47f52 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -103,10 +103,8 @@ ENTRY(stext) #endif #ifndef CONFIG_XIP_KERNEL - adr r3, 2f - ldmia r3, {r4, r8} - sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET) - add r8, r8, r4 @ PHYS_OFFSET + adr_l r8, _text @ __pa(_text) + sub r8, r8, #TEXT_OFFSET @ PHYS_OFFSET #else ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case #endif @@ -158,10 +156,6 @@ ENTRY(stext) 1: b __enable_mmu ENDPROC(stext) .ltorg -#ifndef CONFIG_XIP_KERNEL -2: .long . - .long PAGE_OFFSET -#endif /* * Setup the initial page tables. We only setup the barest @@ -224,11 +218,8 @@ __create_page_tables: * Create identity mapping to cater for __enable_mmu. * This identity mapping will be removed by paging_init(). */ - adr r0, __turn_mmu_on_loc - ldmia r0, {r3, r5, r6} - sub r0, r0, r3 @ virt->phys offset - add r5, r5, r0 @ phys __turn_mmu_on - add r6, r6, r0 @ phys __turn_mmu_on_end + adr_l r5, __turn_mmu_on @ _pa(__turn_mmu_on) + adr_l r6, __turn_mmu_on_end @ _pa(__turn_mmu_on_end) mov r5, r5, lsr #SECTION_SHIFT mov r6, r6, lsr #SECTION_SHIFT @@ -351,11 +342,6 @@ __create_page_tables: ret lr ENDPROC(__create_page_tables) .ltorg - .align -__turn_mmu_on_loc: - .long . - .long __turn_mmu_on - .long __turn_mmu_on_end #if defined(CONFIG_SMP) .text @@ -391,10 +377,8 @@ ENTRY(secondary_startup) /* * Use the page tables supplied from __cpu_up. */ - adr r4, __secondary_data - ldmia r4, {r5, r7, r12} @ address to jump to after - sub lr, r4, r5 @ mmu has been enabled - add r3, r7, lr + adr_l r3, secondary_data + mov_l r12, __secondary_switched ldrd r4, r5, [r3, #0] @ get secondary_data.pgdir ARM_BE8(eor r4, r4, r5) @ Swap r5 and r4 in BE: ARM_BE8(eor r5, r4, r5) @ it can be done in 3 steps @@ -409,22 +393,13 @@ ARM_BE8(eor r4, r4, r5) @ without using a temp reg. ENDPROC(secondary_startup) ENDPROC(secondary_startup_arm) - /* - * r6 = &secondary_data - */ ENTRY(__secondary_switched) - ldr sp, [r7, #12] @ get secondary_data.stack + ldr_l r7, secondary_data + 12 @ get secondary_data.stack + mov sp, r7 mov fp, #0 b secondary_start_kernel ENDPROC(__secondary_switched) - .align - - .type __secondary_data, %object -__secondary_data: - .long . - .long secondary_data - .long __secondary_switched #endif /* defined(CONFIG_SMP) */ @@ -539,19 +514,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian retne lr __fixup_smp_on_up: - adr r0, 1f - ldmia r0, {r3 - r5} - sub r3, r0, r3 - add r4, r4, r3 - add r5, r5, r3 + adr_l r4, __smpalt_begin + adr_l r5, __smpalt_end b __do_fixup_smp_on_up ENDPROC(__fixup_smp) - .align -1: .word . - .word __smpalt_begin - .word __smpalt_end - .pushsection .data .align 2 .globl smp_on_up @@ -565,14 +532,15 @@ smp_on_up: __do_fixup_smp_on_up: cmp r4, r5 reths lr - ldmia r4!, {r0, r6} - ARM( str r6, [r0, r3] ) - THUMB( add r0, r0, r3 ) + ldmia r4, {r0, r6} + ARM( str r6, [r0, r4] ) + THUMB( add r0, r0, r4 ) + add r4, r4, #8 #ifdef __ARMEB__ THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. #endif THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords - THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. + THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r0. THUMB( strh r6, [r0] ) b __do_fixup_smp_on_up ENDPROC(__do_fixup_smp_on_up) @@ -581,7 +549,6 @@ ENTRY(fixup_smp) stmfd sp!, {r4 - r6, lr} mov r4, r0 add r5, r0, r1 - mov r3, #0 bl __do_fixup_smp_on_up ldmfd sp!, {r4 - r6, pc} ENDPROC(fixup_smp) diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 26d8e03b1dd3..103d0bdb2b7e 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -24,41 +24,38 @@ ENTRY(__boot_cpu_mode) .text /* - * Save the primary CPU boot mode. Requires 3 scratch registers. + * Save the primary CPU boot mode. Requires 2 scratch registers. */ - .macro store_primary_cpu_mode reg1, reg2, reg3 + .macro store_primary_cpu_mode reg1, reg2 mrs \reg1, cpsr and \reg1, \reg1, #MODE_MASK - adr \reg2, .L__boot_cpu_mode_offset - ldr \reg3, [\reg2] - str \reg1, [\reg2, \reg3] + str_l \reg1, __boot_cpu_mode, \reg2 .endm /* * Compare the current mode with the one saved on the primary CPU. * If they don't match, record that fact. The Z bit indicates * if there's a match or not. - * Requires 3 additionnal scratch registers. + * Requires 2 additional scratch registers. */ - .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3 - adr \reg2, .L__boot_cpu_mode_offset - ldr \reg3, [\reg2] - ldr \reg1, [\reg2, \reg3] + .macro compare_cpu_mode_with_primary mode, reg1, reg2 + adr_l \reg2, __boot_cpu_mode + ldr \reg1, [\reg2] cmp \mode, \reg1 @ matches primary CPU boot mode? orrne \reg1, \reg1, #BOOT_CPU_MODE_MISMATCH - strne \reg1, [\reg2, \reg3] @ record what happened and give up + strne \reg1, [\reg2] @ record what happened and give up .endm #else /* ZIMAGE */ - .macro store_primary_cpu_mode reg1:req, reg2:req, reg3:req + .macro store_primary_cpu_mode reg1:req, reg2:req .endm /* * The zImage loader only runs on one CPU, so we don't bother with mult-CPU * consistency checking: */ - .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3 + .macro compare_cpu_mode_with_primary mode, reg1, reg2 cmp \mode, \mode .endm @@ -73,7 +70,7 @@ ENTRY(__boot_cpu_mode) */ @ Call this from the primary CPU ENTRY(__hyp_stub_install) - store_primary_cpu_mode r4, r5, r6 + store_primary_cpu_mode r4, r5 ENDPROC(__hyp_stub_install) @ fall through... @@ -87,7 +84,7 @@ ENTRY(__hyp_stub_install_secondary) * If the secondary has booted with a different mode, give up * immediately. */ - compare_cpu_mode_with_primary r4, r5, r6, r7 + compare_cpu_mode_with_primary r4, r5, r6 retne lr /* diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 5dc8b80bb693..43077e11dafd 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -72,8 +72,9 @@ ENTRY(__cpu_suspend) ldr r3, =sleep_save_sp stmfd sp!, {r0, r1} @ save suspend func arg and pointer ldr r3, [r3, #SLEEP_SAVE_SP_VIRT] - ALT_SMP(ldr r0, =mpidr_hash) + ALT_SMP(W(nop)) @ don't use adr_l inside ALT_SMP() ALT_UP_B(1f) + adr_l r0, mpidr_hash /* This ldmia relies on the memory layout of the mpidr_hash struct */ ldmia r0, {r1, r6-r8} @ r1 = mpidr mask (r6,r7,r8) = l[0,1,2] shifts compute_mpidr_hash r0, r6, r7, r8, r2, r1 @@ -147,9 +148,8 @@ no_hyp: mov r1, #0 ALT_SMP(mrc p15, 0, r0, c0, c0, 5) ALT_UP_B(1f) - adr r2, mpidr_hash_ptr - ldr r3, [r2] - add r2, r2, r3 @ r2 = struct mpidr_hash phys address + adr_l r2, mpidr_hash @ r2 = struct mpidr_hash phys address + /* * This ldmia relies on the memory layout of the mpidr_hash * struct mpidr_hash. @@ -157,10 +157,7 @@ no_hyp: ldmia r2, { r3-r6 } @ r3 = mpidr mask (r4,r5,r6) = l[0,1,2] shifts compute_mpidr_hash r1, r4, r5, r6, r0, r3 1: - adr r0, _sleep_save_sp - ldr r2, [r0] - add r0, r0, r2 - ldr r0, [r0, #SLEEP_SAVE_SP_PHYS] + ldr_l r0, sleep_save_sp + SLEEP_SAVE_SP_PHYS ldr r0, [r0, r1, lsl #2] @ load phys pgd, stack, resume fn @@ -177,12 +174,6 @@ ENDPROC(cpu_resume_arm) ENDPROC(cpu_resume_no_hyp) #endif - .align 2 -_sleep_save_sp: - .long sleep_save_sp - . -mpidr_hash_ptr: - .long mpidr_hash - . @ mpidr_hash struct offset - .data .align 2 .type sleep_save_sp, #object |