diff options
Diffstat (limited to 'arch')
518 files changed, 12530 insertions, 11467 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index acda512da2e2..4877a8c8ee16 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -151,4 +151,11 @@ config HAVE_MIXED_BREAKPOINTS_REGS config HAVE_USER_RETURN_NOTIFIER bool +config HAVE_PERF_EVENTS_NMI + bool + help + System hardware can generate an NMI using the perf event + subsystem. Also has support for calculating CPU cycle events + to determine how many clock cycles in a given period. + source "kernel/gcov/Kconfig" diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 3e2e540a0f2a..b9647bb66d13 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -47,10 +47,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_TIME - bool - default y - config GENERIC_CMOS_UPDATE def_bool y diff --git a/arch/alpha/include/asm/local64.h b/arch/alpha/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/alpha/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0ca4a94204df..232f0c758252 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -43,10 +43,6 @@ config SYS_SUPPORTS_APM_EMULATION config GENERIC_GPIO bool -config GENERIC_TIME - bool - default y - config ARCH_USES_GETTIMEOFFSET bool default n diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig deleted file mode 100644 index ad2bc503f2b8..000000000000 --- a/arch/arm/configs/am3517_evm_defconfig +++ /dev/null @@ -1,127 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_RESET_CLOCKS=y -# CONFIG_OMAP_MCBSP is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP3517EVM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_CAN=y -CONFIG_CAN_RAW=y -CONFIG_CAN_BCM=y -CONFIG_CAN_VCAN=y -CONFIG_CAN_DEV=y -CONFIG_CAN_CALC_BITTIMING=y -CONFIG_CAN_TI_HECC=y -CONFIG_CAN_DEBUG_DEVICES=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_TI_DAVINCI_EMAC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_OMAP2_DSS=y -CONFIG_OMAP2_VRAM_SIZE=4 -CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 -CONFIG_FB_OMAP2=y -CONFIG_PANEL_GENERIC=y -CONFIG_PANEL_SHARP_LQ043T1DG01=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig deleted file mode 100644 index 8bb06334ce9c..000000000000 --- a/arch/arm/configs/cm_t35_defconfig +++ /dev/null @@ -1,157 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_CM_T35=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_LIB80211=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_OMAP2=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_TWL4030=m -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=m -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_TWL4030=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_STORAGE=y -CONFIG_USB_TEST=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_TWL4030_USB=y -CONFIG_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/devkit8000_defconfig b/arch/arm/configs/devkit8000_defconfig deleted file mode 100644 index 786cbe49528e..000000000000 --- a/arch/arm/configs/devkit8000_defconfig +++ /dev/null @@ -1,184 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_DEVKIT8000=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root delay=3" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_IRDA=y -CONFIG_BT=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_RAM=y -CONFIG_MTD_ROM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_OMAP2=y -CONFIG_MTD_UBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=40960 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_DM9000=y -CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_MATRIX=y -CONFIG_KEYBOARD_TWL4030=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_SERIO_RAW=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_RAW_DRIVER=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_TWL4030=y -# CONFIG_HWMON is not set -CONFIG_TWL4030_CORE=y -CONFIG_TWL4030_POWER=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_FB=y -CONFIG_FB_FOREIGN_ENDIAN=y -CONFIG_FB_OMAP_BOOTLOADER_INIT=y -CONFIG_OMAP2_DSS=y -CONFIG_FB_OMAP2=y -CONFIG_PANEL_GENERIC=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -# CONFIG_USB_DEVICE_CLASS is not set -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_MUSB_DEBUG=y -CONFIG_USB_STORAGE=m -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DEBUG=y -CONFIG_USB_ETH=m -# CONFIG_USB_ETH_RNDIS is not set -CONFIG_TWL4030_USB=y -CONFIG_MMC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_PLTFM=m -CONFIG_MMC_OMAP_HS=y -CONFIG_MMC_SPI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_UBIFS_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_T10DIF=m -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig deleted file mode 100644 index fcda057d5844..000000000000 --- a/arch/arm/configs/igep0020_defconfig +++ /dev/null @@ -1,179 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_RESET_CLOCKS=y -# CONFIG_OMAP_MUX is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_IGEP0020=y -CONFIG_ARM_THUMBEE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_CFG80211=y -CONFIG_MAC80211=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_STANDALONE is not set -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_OMAP2=y -CONFIG_MTD_ONENAND_2X_PROGRAM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_LIBERTAS=y -CONFIG_LIBERTAS_SDIO=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_TWL4030=y -CONFIG_POWER_SUPPLY=y -# CONFIG_HWMON is not set -CONFIG_SSB=m -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_OMAP2_DSS=y -CONFIG_OMAP2_VRAM_SIZE=14 -# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set -# CONFIG_OMAP2_DSS_VENC is not set -CONFIG_OMAP2_DSS_DSI=y -CONFIG_OMAP2_DSS_USE_DSI_PLL=y -CONFIG_FB_OMAP2=y -# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set -CONFIG_PANEL_GENERIC=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_SND_OMAP_SOC_IGEP0020=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_OHCI_HCD=y -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_OMAP_HS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_MICHAEL_MIC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig deleted file mode 100644 index aa24172a3e2c..000000000000 --- a/arch/arm/configs/omap3_beagle_defconfig +++ /dev/null @@ -1,134 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -# CONFIG_OMAP_MUX is not set -# CONFIG_OMAP_MCBSP is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP3_BEAGLE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_GPIO_TWL4030=y -# CONFIG_HWMON is not set -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_FB=y -CONFIG_FB_OMAP=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_TWL4030_USB=y -CONFIG_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_RTC_CLASS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_FTRACE is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig deleted file mode 100644 index 3b072e8e71fb..000000000000 --- a/arch/arm/configs/omap3_evm_defconfig +++ /dev/null @@ -1,160 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_RESET_CLOCKS=y -# CONFIG_OMAP_MCBSP is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP3EVM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_NAND=y -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_OMAP2=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_TWL4030=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_TWL4030=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -CONFIG_OMAP2_DSS=y -CONFIG_OMAP2_VRAM_SIZE=4 -# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set -CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 -CONFIG_FB_OMAP2=y -# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set -CONFIG_PANEL_GENERIC=y -CONFIG_PANEL_SHARP_LS037V7DW01=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MON=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_STORAGE=y -CONFIG_USB_TEST=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig deleted file mode 100644 index d5a622689370..000000000000 --- a/arch/arm/configs/omap3_pandora_defconfig +++ /dev/null @@ -1,158 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -# CONFIG_OMAP_MUX is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP3_PANDORA=y -CONFIG_ARM_THUMBEE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT_VOLUNTARY=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE=" debug " -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_OMAP2=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=800 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -CONFIG_INPUT_JOYDEV=y -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_TWL4030=y -# CONFIG_MOUSE_PS2 is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_TWL4030_PWRBUTTON=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_TWL4030=y -# CONFIG_HWMON is not set -CONFIG_TWL4030_CORE=y -CONFIG_TWL4030_POWER=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_DEBUG=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_FB=y -CONFIG_OMAP2_DSS=y -CONFIG_FB_OMAP2=y -CONFIG_PANEL_TPO_TD043MTEA1=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_PERIPHERAL=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_TWL4030_USB=y -CONFIG_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CIFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_CRYPTO_CRC32C=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/omap3_stalker_lks_defconfig b/arch/arm/configs/omap3_stalker_lks_defconfig deleted file mode 100644 index 1d1ab0b0b71c..000000000000 --- a/arch/arm/configs/omap3_stalker_lks_defconfig +++ /dev/null @@ -1,150 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_RESET_CLOCKS=y -# CONFIG_OMAP_MCBSP is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_SBC3530=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_NAND=y -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_OMAP2=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_TWL4030=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_TWL4030=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MON=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_STORAGE=y -CONFIG_USB_TEST=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_TWL4030_USB=y -CONFIG_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig deleted file mode 100644 index e988eccc93a8..000000000000 --- a/arch/arm/configs/omap3_touchbook_defconfig +++ /dev/null @@ -1,621 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_ELF_CORE is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_RESET_CLOCKS=y -# CONFIG_OMAP_MUX is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP3_TOUCHBOOK=y -CONFIG_ARM_THUMBEE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE=" debug " -CONFIG_KEXEC=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_DIAG=m -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_UDPLITE=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -CONFIG_IP_VS_DEBUG=y -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m -CONFIG_IP_VS_FTP=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP_DCCP=m -CONFIG_IP_SCTP=m -CONFIG_TIPC=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_WAN_ROUTER=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_IND=y -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y -CONFIG_BT_HCIBTUSB=y -CONFIG_BT_HCIBTSDIO=y -CONFIG_BT_HCIUART=y -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIBCM203X=y -CONFIG_BT_HCIBPA10X=y -CONFIG_BT_HCIBFUSB=y -CONFIG_AF_RXRPC=m -CONFIG_CFG80211=m -CONFIG_LIB80211=y -CONFIG_MAC80211=m -CONFIG_MAC80211_RC_PID=y -# CONFIG_MAC80211_RC_MINSTREL is not set -CONFIG_WIMAX=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_OMAP2=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_MTD_UBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_CDROM_PKTCDVD=m -CONFIG_EEPROM_93CX6=y -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_ISCSI_TCP=m -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_DELAY=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_VETH=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_ATM_DRIVERS is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL_TRAP=y -CONFIG_INPUT_FF_MEMLESS=y -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_TWL4030_PWRBUTTON=y -CONFIG_INPUT_UINPUT=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_SPI_SPIDEV=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_TWL4030=y -CONFIG_POWER_SUPPLY=y -CONFIG_BATTERY_BQ27x00=y -CONFIG_THERMAL=y -CONFIG_THERMAL_HWMON=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_FB=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_LOGO=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_HRTIMER=m -# CONFIG_SND_ARM is not set -CONFIG_SND_USB_AUDIO=y -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MON=y -CONFIG_USB_OXU210HP_HCD=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_FUNSOFT=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MOTOROLA=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_HP4X=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SIEMENS_MPI=m -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_DEBUG=m -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_TEST=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_ZERO=m -CONFIG_USB_ZERO_HNPTEST=y -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_USB_G_PRINTER=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_GPIO_VBUS=y -CONFIG_TWL4030_USB=y -CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_SDIO_UART=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MMC_SPI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_UIO=m -CONFIG_UIO_PDRV=m -CONFIG_UIO_PDRV_GENIRQ=m -CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=m -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_JFS_FS=m -CONFIG_XFS_FS=m -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_SQUASHFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_CIFS_STATS=y -CONFIG_CIFS_STATS2=y -CONFIG_CIFS_EXPERIMENTAL=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_EFI_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_CRYPTO_FIPS=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig deleted file mode 100644 index 0cf4147a9366..000000000000 --- a/arch/arm/configs/omap_2430sdp_defconfig +++ /dev/null @@ -1,136 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -# CONFIG_OMAP_MUX_WARNINGS is not set -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP2430=y -CONFIG_MACH_OMAP_2430SDP=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IPV6 is not set -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_OMAP2=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_SG=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_TWL4030=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_CORE=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_OMAP=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_USB=m -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=m -CONFIG_USB_MUSB_HDRC=m -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_STORAGE=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_TIMER_STATS=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig deleted file mode 100644 index 5dbe595999be..000000000000 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ /dev/null @@ -1,178 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP_3430SDP=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug" -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_NAND=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -# CONFIG_CONSOLE_TRANSLATIONS is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_TWL4030=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_WATCHDOG=y -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_FB=y -CONFIG_OMAP2_DSS=y -CONFIG_OMAP2_VRAM_SIZE=4 -CONFIG_FB_OMAP2=y -CONFIG_PANEL_GENERIC=y -CONFIG_PANEL_SHARP_LS037V7DW01=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_STORAGE=y -CONFIG_USB_TEST=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_SDIO_UART=y -CONFIG_MMC_OMAP_HS=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_ARM_UNWIND is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig deleted file mode 100644 index 8e8f4e94609c..000000000000 --- a/arch/arm/configs/omap_3630sdp_defconfig +++ /dev/null @@ -1,154 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP_3630SDP=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_VERBOSE=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_CONNECTOR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_TWL4030=y -CONFIG_W1=y -CONFIG_POWER_SUPPLY=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MON=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_MUSB_DEBUG=y -CONFIG_USB_STORAGE=y -CONFIG_USB_TEST=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_ZERO=m -CONFIG_USB_AUDIO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_TWL4030_USB=y -CONFIG_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_RTC_CLASS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig deleted file mode 100644 index 0b24858f5d46..000000000000 --- a/arch/arm/configs/omap_apollon_2420_defconfig +++ /dev/null @@ -1,92 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -# CONFIG_OMAP_MCBSP is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_ARCH_OMAP2420=y -CONFIG_MACH_OMAP_APOLLON=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" -CONFIG_VFP=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_GENERIC=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_OMAP=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_HID is not set -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_OMAP=y -CONFIG_EXT2_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_CRC_CCITT=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig deleted file mode 100644 index 858f93aac2b2..000000000000 --- a/arch/arm/configs/omap_h4_2420_defconfig +++ /dev/null @@ -1,107 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_ARCH_OMAP2420=y -CONFIG_MACH_OMAP_H4=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IPV6 is not set -CONFIG_IRDA=y -CONFIG_IRLAN=y -CONFIG_IRCOMM=y -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_OMAP=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_I2C=y -CONFIG_I2C_OMAP=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_MENELAUS=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_OMAP=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_MMC=y -CONFIG_MMC_OMAP=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig deleted file mode 100644 index c7bb558316d5..000000000000 --- a/arch/arm/configs/omap_ldp_defconfig +++ /dev/null @@ -1,135 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP_LDP=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_CONNECTOR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_TWL4030=y -CONFIG_W1=y -CONFIG_POWER_SUPPLY=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_TWL4030_CORE=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_FB_OMAP=y -CONFIG_FB_OMAP_LCD_VGA=y -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4 -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_PLATFORM=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_FTRACE is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig deleted file mode 100644 index 0a7ed449cded..000000000000 --- a/arch/arm/configs/omap_zoom2_defconfig +++ /dev/null @@ -1,143 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP_ZOOM2=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_VERBOSE=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_CONNECTOR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_TWL4030=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_TWL4030=y -CONFIG_W1=y -CONFIG_POWER_SUPPLY=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MON=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_MUSB_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DEBUG=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_ZERO=m -CONFIG_TWL4030_USB=y -CONFIG_MMC=y -CONFIG_MMC_OMAP_HS=y -CONFIG_RTC_CLASS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig deleted file mode 100644 index f8085b0b9ecb..000000000000 --- a/arch/arm/configs/omap_zoom3_defconfig +++ /dev/null @@ -1,155 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP_ZOOM3=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" -CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_VERBOSE=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FW_LOADER is not set -CONFIG_CONNECTOR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_TWL4030=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_TWL4030=y -CONFIG_W1=y -CONFIG_POWER_SUPPLY=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set -CONFIG_USB_MON=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_MUSB_DEBUG=y -CONFIG_USB_STORAGE=y -CONFIG_USB_TEST=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_ZERO=m -CONFIG_USB_AUDIO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_TWL4030_USB=y -CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_MMC_OMAP_HS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig deleted file mode 100644 index 6fa1b14a7a9c..000000000000 --- a/arch/arm/configs/overo_defconfig +++ /dev/null @@ -1,275 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_ELF_CORE is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -# CONFIG_OMAP_MUX is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OVERO=y -CONFIG_ARM_THUMBEE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE=" debug " -CONFIG_KEXEC=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y -CONFIG_BT_HCIUART=y -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIBCM203X=y -CONFIG_BT_HCIBPA10X=y -CONFIG_CFG80211=y -CONFIG_MAC80211=y -CONFIG_MAC80211_RC_PID=y -CONFIG_MAC80211_RC_DEFAULT_PID=y -CONFIG_MAC80211_LEDS=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_CDROM_PKTCDVD=m -CONFIG_EEPROM_LEGACY=y -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_DELAY=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_TUN=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m -CONFIG_RTL8187=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_LIBERTAS=y -CONFIG_LIBERTAS_USB=y -CONFIG_LIBERTAS_SDIO=y -CONFIG_LIBERTAS_DEBUG=y -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=y -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_DEBUG_GPIO=y -CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_DEBUG=y -CONFIG_SND_USB_AUDIO=y -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=m -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_LED=m -CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_SDIO_UART=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_XFS_FS=m -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_FUSE_FS=m -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_FTRACE is not set -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig deleted file mode 100644 index ffaef43ec0bb..000000000000 --- a/arch/arm/configs/rx51_defconfig +++ /dev/null @@ -1,222 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_SLAB=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP3=y -CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_NOKIA_RX51=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8" -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_BINFMT_MISC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_FILTER=m -CONFIG_PHONET=y -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_CFG80211=y -CONFIG_MAC80211=m -CONFIG_MAC80211_RC_PID=y -# CONFIG_MAC80211_RC_MINSTREL is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_OOPS=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_OMAP2=y -CONFIG_MTD_UBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_NETDEVICES=y -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_TWL4030=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_TWL4030_PWRBUTTON=y -CONFIG_INPUT_UINPUT=m -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_TWL4030=y -CONFIG_WATCHDOG=y -CONFIG_OMAP_WATCHDOG=m -CONFIG_TWL4030_WATCHDOG=m -CONFIG_TWL4030_CORE=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_FB=y -CONFIG_OMAP2_DSS=y -# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set -# CONFIG_OMAP2_DSS_DPI is not set -# CONFIG_OMAP2_DSS_VENC is not set -CONFIG_OMAP2_DSS_SDI=y -CONFIG_FB_OMAP2=y -CONFIG_PANEL_ACX565AKM=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_HID=m -CONFIG_USB_HID=m -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GYRATION=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_PANTHERLORD=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y -CONFIG_USB_OTG_BLACKLIST_HUB=y -CONFIG_USB_MON=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_STORAGE=m -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_TEST=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_ZERO=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_NOKIA=m -CONFIG_TWL4030_USB=y -CONFIG_MMC=m -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_OMAP_HS=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m -CONFIG_RTC_CLASS=m -CONFIG_RTC_DRV_TWL4030=m -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_FUSE_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_UBIFS_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_TIMER_STATS=y -CONFIG_PROVE_LOCKING=y -CONFIG_LOCK_STAT=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SECURITY=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_CRC7=m -CONFIG_LIBCRC32C=y diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h index 67af4b841984..08265993227f 100644 --- a/arch/arm/include/asm/kgdb.h +++ b/arch/arm/include/asm/kgdb.h @@ -70,11 +70,11 @@ extern int kgdb_fault_expected; #define _GP_REGS 16 #define _FP_REGS 8 #define _EXTRA_REGS 2 -#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) +#define DBG_MAX_REG_NUM (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) #define KGDB_MAX_NO_CPUS 1 #define BUFMAX 400 -#define NUMREGBYTES (GDB_MAX_REGS << 2) +#define NUMREGBYTES (DBG_MAX_REG_NUM << 2) #define NUMCRITREGBYTES (32 << 2) #define _R0 0 @@ -93,7 +93,7 @@ extern int kgdb_fault_expected; #define _SPT 13 #define _LR 14 #define _PC 15 -#define _CPSR (GDB_MAX_REGS - 1) +#define _CPSR (DBG_MAX_REG_NUM - 1) /* * So that we can denote the end of a frame for tracing, diff --git a/arch/arm/include/asm/local64.h b/arch/arm/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/arm/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index c868a8864117..778c2f7024ff 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -10,57 +10,62 @@ * Deepak Saxena <dsaxena@plexity.net> */ #include <linux/irq.h> +#include <linux/kdebug.h> #include <linux/kgdb.h> #include <asm/traps.h> -/* Make a local copy of the registers passed into the handler (bletch) */ -void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = { - int regno; - - /* Initialize all to zero. */ - for (regno = 0; regno < GDB_MAX_REGS; regno++) - gdb_regs[regno] = 0; + { "r0", 4, offsetof(struct pt_regs, ARM_r0)}, + { "r1", 4, offsetof(struct pt_regs, ARM_r1)}, + { "r2", 4, offsetof(struct pt_regs, ARM_r2)}, + { "r3", 4, offsetof(struct pt_regs, ARM_r3)}, + { "r4", 4, offsetof(struct pt_regs, ARM_r4)}, + { "r5", 4, offsetof(struct pt_regs, ARM_r5)}, + { "r6", 4, offsetof(struct pt_regs, ARM_r6)}, + { "r7", 4, offsetof(struct pt_regs, ARM_r7)}, + { "r8", 4, offsetof(struct pt_regs, ARM_r8)}, + { "r9", 4, offsetof(struct pt_regs, ARM_r9)}, + { "r10", 4, offsetof(struct pt_regs, ARM_r10)}, + { "fp", 4, offsetof(struct pt_regs, ARM_fp)}, + { "ip", 4, offsetof(struct pt_regs, ARM_ip)}, + { "sp", 4, offsetof(struct pt_regs, ARM_sp)}, + { "lr", 4, offsetof(struct pt_regs, ARM_lr)}, + { "pc", 4, offsetof(struct pt_regs, ARM_pc)}, + { "f0", 12, -1 }, + { "f1", 12, -1 }, + { "f2", 12, -1 }, + { "f3", 12, -1 }, + { "f4", 12, -1 }, + { "f5", 12, -1 }, + { "f6", 12, -1 }, + { "f7", 12, -1 }, + { "fps", 4, -1 }, + { "cpsr", 4, offsetof(struct pt_regs, ARM_cpsr)}, +}; - gdb_regs[_R0] = kernel_regs->ARM_r0; - gdb_regs[_R1] = kernel_regs->ARM_r1; - gdb_regs[_R2] = kernel_regs->ARM_r2; - gdb_regs[_R3] = kernel_regs->ARM_r3; - gdb_regs[_R4] = kernel_regs->ARM_r4; - gdb_regs[_R5] = kernel_regs->ARM_r5; - gdb_regs[_R6] = kernel_regs->ARM_r6; - gdb_regs[_R7] = kernel_regs->ARM_r7; - gdb_regs[_R8] = kernel_regs->ARM_r8; - gdb_regs[_R9] = kernel_regs->ARM_r9; - gdb_regs[_R10] = kernel_regs->ARM_r10; - gdb_regs[_FP] = kernel_regs->ARM_fp; - gdb_regs[_IP] = kernel_regs->ARM_ip; - gdb_regs[_SPT] = kernel_regs->ARM_sp; - gdb_regs[_LR] = kernel_regs->ARM_lr; - gdb_regs[_PC] = kernel_regs->ARM_pc; - gdb_regs[_CPSR] = kernel_regs->ARM_cpsr; +char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs) +{ + if (regno >= DBG_MAX_REG_NUM || regno < 0) + return NULL; + + if (dbg_reg_def[regno].offset != -1) + memcpy(mem, (void *)regs + dbg_reg_def[regno].offset, + dbg_reg_def[regno].size); + else + memset(mem, 0, dbg_reg_def[regno].size); + return dbg_reg_def[regno].name; } -/* Copy local gdb registers back to kgdb regs, for later copy to kernel */ -void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) { - kernel_regs->ARM_r0 = gdb_regs[_R0]; - kernel_regs->ARM_r1 = gdb_regs[_R1]; - kernel_regs->ARM_r2 = gdb_regs[_R2]; - kernel_regs->ARM_r3 = gdb_regs[_R3]; - kernel_regs->ARM_r4 = gdb_regs[_R4]; - kernel_regs->ARM_r5 = gdb_regs[_R5]; - kernel_regs->ARM_r6 = gdb_regs[_R6]; - kernel_regs->ARM_r7 = gdb_regs[_R7]; - kernel_regs->ARM_r8 = gdb_regs[_R8]; - kernel_regs->ARM_r9 = gdb_regs[_R9]; - kernel_regs->ARM_r10 = gdb_regs[_R10]; - kernel_regs->ARM_fp = gdb_regs[_FP]; - kernel_regs->ARM_ip = gdb_regs[_IP]; - kernel_regs->ARM_sp = gdb_regs[_SPT]; - kernel_regs->ARM_lr = gdb_regs[_LR]; - kernel_regs->ARM_pc = gdb_regs[_PC]; - kernel_regs->ARM_cpsr = gdb_regs[_CPSR]; + if (regno >= DBG_MAX_REG_NUM || regno < 0) + return -EINVAL; + + if (dbg_reg_def[regno].offset != -1) + memcpy((void *)regs + dbg_reg_def[regno].offset, mem, + dbg_reg_def[regno].size); + return 0; } void @@ -176,6 +181,33 @@ void kgdb_roundup_cpus(unsigned long flags) local_irq_disable(); } +static int __kgdb_notify(struct die_args *args, unsigned long cmd) +{ + struct pt_regs *regs = args->regs; + + if (kgdb_handle_exception(1, args->signr, cmd, regs)) + return NOTIFY_DONE; + return NOTIFY_STOP; +} +static int +kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + ret = __kgdb_notify(ptr, cmd); + local_irq_restore(flags); + + return ret; +} + +static struct notifier_block kgdb_notifier = { + .notifier_call = kgdb_notify, + .priority = -INT_MAX, +}; + + /** * kgdb_arch_init - Perform any architecture specific initalization. * @@ -184,6 +216,11 @@ void kgdb_roundup_cpus(unsigned long flags) */ int kgdb_arch_init(void) { + int ret = register_die_notifier(&kgdb_notifier); + + if (ret != 0) + return ret; + register_undef_hook(&kgdb_brkpt_hook); register_undef_hook(&kgdb_compiled_brkpt_hook); @@ -200,6 +237,7 @@ void kgdb_arch_exit(void) { unregister_undef_hook(&kgdb_brkpt_hook); unregister_undef_hook(&kgdb_compiled_brkpt_hook); + unregister_die_notifier(&kgdb_notifier); } /* diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index de12536d687f..417c392ddf1c 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -164,20 +164,20 @@ armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, int idx) { - s64 left = atomic64_read(&hwc->period_left); + s64 left = local64_read(&hwc->period_left); s64 period = hwc->sample_period; int ret = 0; if (unlikely(left <= -period)) { left = period; - atomic64_set(&hwc->period_left, left); + local64_set(&hwc->period_left, left); hwc->last_period = period; ret = 1; } if (unlikely(left <= 0)) { left += period; - atomic64_set(&hwc->period_left, left); + local64_set(&hwc->period_left, left); hwc->last_period = period; ret = 1; } @@ -185,7 +185,7 @@ armpmu_event_set_period(struct perf_event *event, if (left > (s64)armpmu->max_period) left = armpmu->max_period; - atomic64_set(&hwc->prev_count, (u64)-left); + local64_set(&hwc->prev_count, (u64)-left); armpmu->write_counter(idx, (u64)(-left) & 0xffffffff); @@ -204,18 +204,18 @@ armpmu_event_update(struct perf_event *event, u64 delta; again: - prev_raw_count = atomic64_read(&hwc->prev_count); + prev_raw_count = local64_read(&hwc->prev_count); new_raw_count = armpmu->read_counter(idx); - if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count, + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, new_raw_count) != prev_raw_count) goto again; delta = (new_raw_count << shift) - (prev_raw_count << shift); delta >>= shift; - atomic64_add(delta, &event->count); - atomic64_sub(delta, &hwc->period_left); + local64_add(delta, &event->count); + local64_sub(delta, &hwc->period_left); return new_raw_count; } @@ -478,7 +478,7 @@ __hw_perf_event_init(struct perf_event *event) if (!hwc->sample_period) { hwc->sample_period = armpmu->max_period; hwc->last_period = hwc->sample_period; - atomic64_set(&hwc->period_left, hwc->sample_period); + local64_set(&hwc->period_left, hwc->sample_period); } err = 0; diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 0316e201ada0..71f90f864748 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -50,6 +50,11 @@ config ARCH_DAVINCI_DM365 select AINTC select ARCH_DAVINCI_DMx +config ARCH_DAVINCI_TNETV107X + select CPU_V6 + select CP_INTC + bool "TNETV107X based system" + comment "DaVinci Board Type" config MACH_DAVINCI_EVM @@ -173,6 +178,13 @@ config DA850_UI_RMII endchoice +config MACH_TNETV107X + bool "TI TNETV107X Reference Platform" + default ARCH_DAVINCI_TNETV107X + depends on ARCH_DAVINCI_TNETV107X + help + Say Y here to select the TI TNETV107X Evaluation Module. + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 6aac880eb794..eab4c0fd667a 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -16,6 +16,8 @@ obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o obj-$(CONFIG_ARCH_DAVINCI_DA850) += da850.o devices-da8xx.o +obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += tnetv107x.o devices-tnetv107x.o +obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o @@ -30,6 +32,7 @@ obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o cdce949.o obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o +obj-$(CONFIG_MACH_TNETV107X) += board-tnetv107x-evm.o # Power Management obj-$(CONFIG_CPU_FREQ) += cpufreq.o diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 212d97084bd7..c3994f341e49 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -208,7 +208,7 @@ static struct snd_platform_data da830_evm_snd_data = { .num_serializer = ARRAY_SIZE(da830_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da830_iis_serializer_direction, - .eventq_no = EVENTQ_0, + .asp_chan_q = EVENTQ_0, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, @@ -494,12 +494,42 @@ static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = { .bus_delay = 0, /* usec */ }; +/* + * The following EDMA channels/slots are not being used by drivers (for + * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence + * they are being reserved for codecs on the DSP side. + */ +static const s16 da830_dma_rsv_chans[][2] = { + /* (offset, number) */ + { 8, 2}, + {12, 2}, + {24, 4}, + {30, 2}, + {-1, -1} +}; + +static const s16 da830_dma_rsv_slots[][2] = { + /* (offset, number) */ + { 8, 2}, + {12, 2}, + {24, 4}, + {30, 26}, + {-1, -1} +}; + +static struct edma_rsv_info da830_edma_rsv[] = { + { + .rsv_chans = da830_dma_rsv_chans, + .rsv_slots = da830_dma_rsv_slots, + }, +}; + static __init void da830_evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; - ret = da8xx_register_edma(); + ret = da830_register_edma(da830_edma_rsv); if (ret) pr_warning("da830_evm_init: edma registration failed: %d\n", ret); diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index b280efb1fa12..fdc2cc500fc6 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -343,7 +343,7 @@ static struct snd_platform_data da850_evm_snd_data = { .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da850_iis_serializer_direction, - .eventq_no = EVENTQ_1, + .asp_chan_q = EVENTQ_1, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, @@ -637,6 +637,56 @@ static int __init da850_evm_config_emac(void) } device_initcall(da850_evm_config_emac); +/* + * The following EDMA channels/slots are not being used by drivers (for + * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence + * they are being reserved for codecs on the DSP side. + */ +static const s16 da850_dma0_rsv_chans[][2] = { + /* (offset, number) */ + { 8, 6}, + {24, 4}, + {30, 2}, + {-1, -1} +}; + +static const s16 da850_dma0_rsv_slots[][2] = { + /* (offset, number) */ + { 8, 6}, + {24, 4}, + {30, 50}, + {-1, -1} +}; + +static const s16 da850_dma1_rsv_chans[][2] = { + /* (offset, number) */ + { 0, 28}, + {30, 2}, + {-1, -1} +}; + +static const s16 da850_dma1_rsv_slots[][2] = { + /* (offset, number) */ + { 0, 28}, + {30, 90}, + {-1, -1} +}; + +static struct edma_rsv_info da850_edma_cc0_rsv = { + .rsv_chans = da850_dma0_rsv_chans, + .rsv_slots = da850_dma0_rsv_slots, +}; + +static struct edma_rsv_info da850_edma_cc1_rsv = { + .rsv_chans = da850_dma1_rsv_chans, + .rsv_slots = da850_dma1_rsv_slots, +}; + +static struct edma_rsv_info *da850_edma_rsv[2] = { + &da850_edma_cc0_rsv, + &da850_edma_cc1_rsv, +}; + static __init void da850_evm_init(void) { int ret; @@ -646,7 +696,7 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n", ret); - ret = da8xx_register_edma(); + ret = da850_register_edma(da850_edma_rsv); if (ret) pr_warning("da850_evm_init: edma registration failed: %d\n", ret); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 6d8889342c9f..4502f346b2b0 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -323,7 +323,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = { .num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction), .tdm_slots = 2, .serial_dir = dm646x_iis_serializer_direction, - .eventq_no = EVENTQ_0, + .asp_chan_q = EVENTQ_0, }, { .tx_dma_offset = 0x400, @@ -332,7 +332,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = { .num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction), .tdm_slots = 32, .serial_dir = dm646x_dit_serializer_direction, - .eventq_no = EVENTQ_0, + .asp_chan_q = EVENTQ_0, }, }; @@ -721,6 +721,39 @@ static struct davinci_uart_config uart_config __initdata = { #define DM646X_EVM_PHY_MASK (0x2) #define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ +/* + * The following EDMA channels/slots are not being used by drivers (for + * example: Timer, GPIO, UART events etc) on dm646x, hence they are being + * reserved for codecs on the DSP side. + */ +static const s16 dm646x_dma_rsv_chans[][2] = { + /* (offset, number) */ + { 0, 4}, + {13, 3}, + {24, 4}, + {30, 2}, + {54, 3}, + {-1, -1} +}; + +static const s16 dm646x_dma_rsv_slots[][2] = { + /* (offset, number) */ + { 0, 4}, + {13, 3}, + {24, 4}, + {30, 2}, + {54, 3}, + {128, 384}, + {-1, -1} +}; + +static struct edma_rsv_info dm646x_edma_rsv[] = { + { + .rsv_chans = dm646x_dma_rsv_chans, + .rsv_slots = dm646x_dma_rsv_slots, + }, +}; + static __init void evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; @@ -732,6 +765,8 @@ static __init void evm_init(void) platform_device_register(&davinci_nand_device); + dm646x_init_edma(dm646x_edma_rsv); + if (HAS_ATA) davinci_init_ide(); diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c new file mode 100644 index 000000000000..fe2a9d9c8bb7 --- /dev/null +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -0,0 +1,174 @@ +/* + * Texas Instruments TNETV107X EVM Board Support + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/ratelimit.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/irqs.h> +#include <mach/edma.h> +#include <mach/mux.h> +#include <mach/cp_intc.h> +#include <mach/tnetv107x.h> + +#define EVM_MMC_WP_GPIO 21 +#define EVM_MMC_CD_GPIO 24 + +static int initialize_gpio(int gpio, char *desc) +{ + int ret; + + ret = gpio_request(gpio, desc); + if (ret < 0) { + pr_err_ratelimited("cannot open %s gpio\n", desc); + return -ENOSYS; + } + gpio_direction_input(gpio); + return gpio; +} + +static int mmc_get_cd(int index) +{ + static int gpio; + + if (!gpio) + gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect"); + + if (gpio < 0) + return gpio; + + return gpio_get_value(gpio) ? 0 : 1; +} + +static int mmc_get_ro(int index) +{ + static int gpio; + + if (!gpio) + gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect"); + + if (gpio < 0) + return gpio; + + return gpio_get_value(gpio) ? 1 : 0; +} + +static struct davinci_mmc_config mmc_config = { + .get_cd = mmc_get_cd, + .get_ro = mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_1, +}; + +static const short sdio1_pins[] __initdata = { + TNETV107X_SDIO1_CLK_1, TNETV107X_SDIO1_CMD_1, + TNETV107X_SDIO1_DATA0_1, TNETV107X_SDIO1_DATA1_1, + TNETV107X_SDIO1_DATA2_1, TNETV107X_SDIO1_DATA3_1, + TNETV107X_GPIO21, TNETV107X_GPIO24, + -1 +}; + +static const short uart1_pins[] __initdata = { + TNETV107X_UART1_RD, TNETV107X_UART1_TD, + -1 +}; + +static struct mtd_partition nand_partitions[] = { + /* bootloader (U-Boot, etc) in first 12 sectors */ + { + .name = "bootloader", + .offset = 0, + .size = (12*SZ_128K), + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = SZ_4M, + .mask_flags = 0, + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } +}; + +static struct davinci_nand_pdata nand_config = { + .mask_cle = 0x4000, + .mask_ale = 0x2000, + .parts = nand_partitions, + .nr_parts = ARRAY_SIZE(nand_partitions), + .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, + .ecc_bits = 1, +}; + +static struct davinci_uart_config serial_config __initconst = { + .enabled_uarts = BIT(1), +}; + +static struct tnetv107x_device_info evm_device_info __initconst = { + .serial_config = &serial_config, + .mmc_config[1] = &mmc_config, /* controller 1 */ + .nand_config[0] = &nand_config, /* chip select 0 */ +}; + +static __init void tnetv107x_evm_board_init(void) +{ + davinci_cfg_reg_list(sdio1_pins); + davinci_cfg_reg_list(uart1_pins); + + tnetv107x_devices_init(&evm_device_info); +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init tnetv107x_evm_console_init(void) +{ + return add_preferred_console("ttyS", 0, "115200"); +} +console_initcall(tnetv107x_evm_console_init); +#endif + +MACHINE_START(TNETV107X, "TNETV107X EVM") + .phys_io = TNETV107X_IO_BASE, + .io_pg_offst = (TNETV107X_IO_VIRT >> 18) & 0xfffc, + .boot_params = (TNETV107X_DDR_BASE + 0x100), + .map_io = tnetv107x_init, + .init_irq = cp_intc_init, + .timer = &davinci_timer, + .init_machine = tnetv107x_evm_board_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 23e9eda5a377..ec23ab473620 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -1024,7 +1024,6 @@ static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = { [IRQ_DA8XX_EVTOUT4] = 7, [IRQ_DA8XX_EVTOUT5] = 7, [IRQ_DA8XX_EVTOUT6] = 7, - [IRQ_DA8XX_EVTOUT6] = 7, [IRQ_DA8XX_EVTOUT7] = 7, [IRQ_DA8XX_CCINT0] = 7, [IRQ_DA8XX_CCERRINT] = 7, @@ -1042,11 +1041,7 @@ static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = { [IRQ_DA8XX_TINT34_1] = 7, [IRQ_DA8XX_UARTINT0] = 7, [IRQ_DA8XX_KEYMGRINT] = 7, - [IRQ_DA8XX_SECINT] = 7, - [IRQ_DA8XX_SECKEYERR] = 7, [IRQ_DA830_MPUERR] = 7, - [IRQ_DA830_IOPUERR] = 7, - [IRQ_DA830_BOOTCFGERR] = 7, [IRQ_DA8XX_CHIPINT0] = 7, [IRQ_DA8XX_CHIPINT1] = 7, [IRQ_DA8XX_CHIPINT2] = 7, diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 6b8331bf8cf3..68ed58a48252 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -643,7 +643,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_EVTOUT4] = 7, [IRQ_DA8XX_EVTOUT5] = 7, [IRQ_DA8XX_EVTOUT6] = 7, - [IRQ_DA8XX_EVTOUT6] = 7, [IRQ_DA8XX_EVTOUT7] = 7, [IRQ_DA8XX_CCINT0] = 7, [IRQ_DA8XX_CCERRINT] = 7, @@ -661,27 +660,7 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_TINT34_1] = 7, [IRQ_DA8XX_UARTINT0] = 7, [IRQ_DA8XX_KEYMGRINT] = 7, - [IRQ_DA8XX_SECINT] = 7, - [IRQ_DA8XX_SECKEYERR] = 7, [IRQ_DA850_MPUADDRERR0] = 7, - [IRQ_DA850_MPUPROTERR0] = 7, - [IRQ_DA850_IOPUADDRERR0] = 7, - [IRQ_DA850_IOPUPROTERR0] = 7, - [IRQ_DA850_IOPUADDRERR1] = 7, - [IRQ_DA850_IOPUPROTERR1] = 7, - [IRQ_DA850_IOPUADDRERR2] = 7, - [IRQ_DA850_IOPUPROTERR2] = 7, - [IRQ_DA850_BOOTCFG_ADDR_ERR] = 7, - [IRQ_DA850_BOOTCFG_PROT_ERR] = 7, - [IRQ_DA850_MPUADDRERR1] = 7, - [IRQ_DA850_MPUPROTERR1] = 7, - [IRQ_DA850_IOPUADDRERR3] = 7, - [IRQ_DA850_IOPUPROTERR3] = 7, - [IRQ_DA850_IOPUADDRERR4] = 7, - [IRQ_DA850_IOPUPROTERR4] = 7, - [IRQ_DA850_IOPUADDRERR5] = 7, - [IRQ_DA850_IOPUPROTERR5] = 7, - [IRQ_DA850_MIOPU_BOOTCFG_ERR] = 7, [IRQ_DA8XX_CHIPINT0] = 7, [IRQ_DA8XX_CHIPINT1] = 7, [IRQ_DA8XX_CHIPINT2] = 7, @@ -722,8 +701,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_EHRPWM1] = 7, [IRQ_DA8XX_EHRPWM1TZ] = 7, [IRQ_DA850_SATAINT] = 7, - [IRQ_DA850_TINT12_2] = 7, - [IRQ_DA850_TINT34_2] = 7, [IRQ_DA850_TINTALL_2] = 7, [IRQ_DA8XX_ECAP0] = 7, [IRQ_DA8XX_ECAP1] = 7, @@ -751,8 +728,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA850_CCINT1] = 7, [IRQ_DA850_CCERRINT1] = 7, [IRQ_DA850_TCERRINT2] = 7, - [IRQ_DA850_TINT12_3] = 7, - [IRQ_DA850_TINT34_3] = 7, [IRQ_DA850_TINTALL_3] = 7, [IRQ_DA850_MCBSP0RINT] = 7, [IRQ_DA850_MCBSP0XINT] = 7, diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 8cda729be273..52bc7b1c6ca3 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -111,19 +111,21 @@ static const s8 da850_queue_priority_mapping[][2] = { {-1, -1} }; -static struct edma_soc_info da830_edma_info[] = { - { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = da8xx_queue_tc_mapping, - .queue_priority_mapping = da8xx_queue_priority_mapping, - }, +static struct edma_soc_info da830_edma_cc0_info = { + .n_channel = 32, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .n_cc = 1, + .queue_tc_mapping = da8xx_queue_tc_mapping, + .queue_priority_mapping = da8xx_queue_priority_mapping, +}; + +static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = { + &da830_edma_cc0_info, }; -static struct edma_soc_info da850_edma_info[] = { +static struct edma_soc_info da850_edma_cc_info[] = { { .n_channel = 32, .n_region = 4, @@ -144,6 +146,11 @@ static struct edma_soc_info da850_edma_info[] = { }, }; +static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = { + &da850_edma_cc_info[0], + &da850_edma_cc_info[1], +}; + static struct resource da830_edma_resources[] = { { .name = "edma_cc0", @@ -248,18 +255,21 @@ static struct platform_device da850_edma_device = { .resource = da850_edma_resources, }; -int __init da8xx_register_edma(void) +int __init da830_register_edma(struct edma_rsv_info *rsv) { - struct platform_device *pdev; + da830_edma_cc0_info.rsv = rsv; - if (cpu_is_davinci_da830()) - pdev = &da830_edma_device; - else if (cpu_is_davinci_da850()) - pdev = &da850_edma_device; - else - return -ENODEV; + return platform_device_register(&da830_edma_device); +} - return platform_device_register(pdev); +int __init da850_register_edma(struct edma_rsv_info *rsv[2]) +{ + if (rsv) { + da850_edma_cc_info[0].rsv = rsv[0]; + da850_edma_cc_info[1].rsv = rsv[1]; + } + + return platform_device_register(&da850_edma_device); } static struct resource da8xx_i2c_resources0[] = { diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c new file mode 100644 index 000000000000..2718a3a90dff --- /dev/null +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -0,0 +1,320 @@ +/* + * Texas Instruments TNETV107X SoC devices + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/slab.h> + +#include <mach/common.h> +#include <mach/irqs.h> +#include <mach/edma.h> +#include <mach/tnetv107x.h> + +#include "clock.h" + +/* Base addresses for on-chip devices */ +#define TNETV107X_TPCC_BASE 0x01c00000 +#define TNETV107X_TPTC0_BASE 0x01c10000 +#define TNETV107X_TPTC1_BASE 0x01c10400 +#define TNETV107X_WDOG_BASE 0x08086700 +#define TNETV107X_SDIO0_BASE 0x08088700 +#define TNETV107X_SDIO1_BASE 0x08088800 +#define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000 +#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000 +#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000 +#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE 0x44000000 +#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE 0x48000000 + +/* TNETV107X specific EDMA3 information */ +#define EDMA_TNETV107X_NUM_DMACH 64 +#define EDMA_TNETV107X_NUM_TCC 64 +#define EDMA_TNETV107X_NUM_PARAMENTRY 128 +#define EDMA_TNETV107X_NUM_EVQUE 2 +#define EDMA_TNETV107X_NUM_TC 2 +#define EDMA_TNETV107X_CHMAP_EXIST 0 +#define EDMA_TNETV107X_NUM_REGIONS 4 +#define TNETV107X_DMACH2EVENT_MAP0 0x3C0CE000u +#define TNETV107X_DMACH2EVENT_MAP1 0x000FFFFFu + +#define TNETV107X_DMACH_SDIO0_RX 26 +#define TNETV107X_DMACH_SDIO0_TX 27 +#define TNETV107X_DMACH_SDIO1_RX 28 +#define TNETV107X_DMACH_SDIO1_TX 29 + +static const s8 edma_tc_mapping[][2] = { + /* event queue no TC no */ + { 0, 0 }, + { 1, 1 }, + { -1, -1 } +}; + +static const s8 edma_priority_mapping[][2] = { + /* event queue no Prio */ + { 0, 3 }, + { 1, 7 }, + { -1, -1 } +}; + +static struct edma_soc_info edma_cc0_info = { + .n_channel = EDMA_TNETV107X_NUM_DMACH, + .n_region = EDMA_TNETV107X_NUM_REGIONS, + .n_slot = EDMA_TNETV107X_NUM_PARAMENTRY, + .n_tc = EDMA_TNETV107X_NUM_TC, + .n_cc = 1, + .queue_tc_mapping = edma_tc_mapping, + .queue_priority_mapping = edma_priority_mapping, +}; + +static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = { + &edma_cc0_info, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc0", + .start = TNETV107X_TPCC_BASE, + .end = TNETV107X_TPCC_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = TNETV107X_TPTC0_BASE, + .end = TNETV107X_TPTC0_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = TNETV107X_TPTC1_BASE, + .end = TNETV107X_TPTC1_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma0", + .start = IRQ_TNETV107X_TPCC, + .flags = IORESOURCE_IRQ, + }, + { + .name = "edma0_err", + .start = IRQ_TNETV107X_TPCC_ERR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device edma_device = { + .name = "edma", + .id = -1, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, + .dev.platform_data = tnetv107x_edma_info, +}; + +static struct plat_serial8250_port serial_data[] = { + { + .mapbase = TNETV107X_UART0_BASE, + .irq = IRQ_TNETV107X_UART0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_FIXED_TYPE | UPF_IOREMAP, + .type = PORT_AR7, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = TNETV107X_UART1_BASE, + .irq = IRQ_TNETV107X_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_FIXED_TYPE | UPF_IOREMAP, + .type = PORT_AR7, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = TNETV107X_UART2_BASE, + .irq = IRQ_TNETV107X_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_FIXED_TYPE | UPF_IOREMAP, + .type = PORT_AR7, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .flags = 0, + }, +}; + +struct platform_device tnetv107x_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = serial_data, +}; + +static struct resource mmc0_resources[] = { + { /* Memory mapped registers */ + .start = TNETV107X_SDIO0_BASE, + .end = TNETV107X_SDIO0_BASE + 0x0ff, + .flags = IORESOURCE_MEM + }, + { /* MMC interrupt */ + .start = IRQ_TNETV107X_MMC0, + .flags = IORESOURCE_IRQ + }, + { /* SDIO interrupt */ + .start = IRQ_TNETV107X_SDIO0, + .flags = IORESOURCE_IRQ + }, + { /* DMA RX */ + .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_RX), + .flags = IORESOURCE_DMA + }, + { /* DMA TX */ + .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_TX), + .flags = IORESOURCE_DMA + }, +}; + +static struct resource mmc1_resources[] = { + { /* Memory mapped registers */ + .start = TNETV107X_SDIO1_BASE, + .end = TNETV107X_SDIO1_BASE + 0x0ff, + .flags = IORESOURCE_MEM + }, + { /* MMC interrupt */ + .start = IRQ_TNETV107X_MMC1, + .flags = IORESOURCE_IRQ + }, + { /* SDIO interrupt */ + .start = IRQ_TNETV107X_SDIO1, + .flags = IORESOURCE_IRQ + }, + { /* DMA RX */ + .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_RX), + .flags = IORESOURCE_DMA + }, + { /* DMA TX */ + .start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_TX), + .flags = IORESOURCE_DMA + }, +}; + +static u64 mmc0_dma_mask = DMA_BIT_MASK(32); +static u64 mmc1_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device mmc_devices[2] = { + { + .name = "davinci_mmc", + .id = 0, + .dev = { + .dma_mask = &mmc0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mmc0_resources), + .resource = mmc0_resources + }, + { + .name = "davinci_mmc", + .id = 1, + .dev = { + .dma_mask = &mmc1_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(mmc1_resources), + .resource = mmc1_resources + }, +}; + +static const u32 emif_windows[] = { + TNETV107X_ASYNC_EMIF_DATA_CE0_BASE, TNETV107X_ASYNC_EMIF_DATA_CE1_BASE, + TNETV107X_ASYNC_EMIF_DATA_CE2_BASE, TNETV107X_ASYNC_EMIF_DATA_CE3_BASE, +}; + +static const u32 emif_window_sizes[] = { SZ_256M, SZ_64M, SZ_64M, SZ_64M }; + +static struct resource wdt_resources[] = { + { + .start = TNETV107X_WDOG_BASE, + .end = TNETV107X_WDOG_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device tnetv107x_wdt_device = { + .name = "tnetv107x_wdt", + .id = 0, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static int __init nand_init(int chipsel, struct davinci_nand_pdata *data) +{ + struct resource res[2]; + struct platform_device *pdev; + u32 range; + int ret; + + /* Figure out the resource range from the ale/cle masks */ + range = max(data->mask_cle, data->mask_ale); + range = PAGE_ALIGN(range + 4) - 1; + + if (range >= emif_window_sizes[chipsel]) + return -EINVAL; + + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->name = "davinci_nand"; + pdev->id = chipsel; + pdev->dev.platform_data = data; + + memset(res, 0, sizeof(res)); + + res[0].start = emif_windows[chipsel]; + res[0].end = res[0].start + range; + res[0].flags = IORESOURCE_MEM; + + res[1].start = TNETV107X_ASYNC_EMIF_CNTRL_BASE; + res[1].end = res[1].start + SZ_4K - 1; + res[1].flags = IORESOURCE_MEM; + + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); + if (ret < 0) { + kfree(pdev); + return ret; + } + + return platform_device_register(pdev); +} + +void __init tnetv107x_devices_init(struct tnetv107x_device_info *info) +{ + int i; + + platform_device_register(&edma_device); + platform_device_register(&tnetv107x_wdt_device); + + if (info->serial_config) + davinci_serial_init(info->serial_config); + + for (i = 0; i < 2; i++) + if (info->mmc_config[i]) { + mmc_devices[i].dev.platform_data = info->mmc_config[i]; + platform_device_register(&mmc_devices[i]); + } + + for (i = 0; i < 4; i++) + if (info->nand_config[i]) + nand_init(i, info->nand_config[i]); +} diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 383478116ef5..3d996b659ff4 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -591,16 +591,18 @@ queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info dm355_edma_info[] = { - { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, - .queue_priority_mapping = queue_priority_mapping, - }, +static struct edma_soc_info edma_cc0_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .n_cc = 1, + .queue_tc_mapping = queue_tc_mapping, + .queue_priority_mapping = queue_priority_mapping, +}; + +static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = { + &edma_cc0_info, }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index a146849d78f0..6b6f4c643709 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -822,17 +822,19 @@ dm365_queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info dm365_edma_info[] = { - { - .n_channel = 64, - .n_region = 4, - .n_slot = 256, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm365_queue_tc_mapping, - .queue_priority_mapping = dm365_queue_priority_mapping, - .default_queue = EVENTQ_3, - }, +static struct edma_soc_info edma_cc0_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 256, + .n_tc = 4, + .n_cc = 1, + .queue_tc_mapping = dm365_queue_tc_mapping, + .queue_priority_mapping = dm365_queue_priority_mapping, + .default_queue = EVENTQ_3, +}; + +static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = { + &edma_cc0_info, }; static struct resource edma_resources[] = { @@ -1020,6 +1022,8 @@ static struct davinci_timer_info dm365_timer_info = { .clocksource_id = T0_TOP, }; +#define DM365_UART1_BASE (IO_PHYS + 0x106000) + static struct plat_serial8250_port dm365_serial_platform_data[] = { { .mapbase = DAVINCI_UART0_BASE, @@ -1030,7 +1034,7 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = { .regshift = 2, }, { - .mapbase = DAVINCI_UART1_BASE, + .mapbase = DM365_UART1_BASE, .irq = IRQ_UARTINT1, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 7ad15208b841..40fec315c99a 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -492,16 +492,18 @@ queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info dm644x_edma_info[] = { - { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, - .queue_priority_mapping = queue_priority_mapping, - }, +static struct edma_soc_info edma_cc0_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .n_cc = 1, + .queue_tc_mapping = queue_tc_mapping, + .queue_priority_mapping = queue_priority_mapping, +}; + +static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = { + &edma_cc0_info, }; static struct resource edma_resources[] = { diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 94045656cff6..e4a3df1872ac 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -529,16 +529,18 @@ dm646x_queue_priority_mapping[][2] = { {-1, -1}, }; -static struct edma_soc_info dm646x_edma_info[] = { - { - .n_channel = 64, - .n_region = 6, /* 0-1, 4-7 */ - .n_slot = 512, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm646x_queue_tc_mapping, - .queue_priority_mapping = dm646x_queue_priority_mapping, - }, +static struct edma_soc_info edma_cc0_info = { + .n_channel = 64, + .n_region = 6, /* 0-1, 4-7 */ + .n_slot = 512, + .n_tc = 4, + .n_cc = 1, + .queue_tc_mapping = dm646x_queue_tc_mapping, + .queue_priority_mapping = dm646x_queue_priority_mapping, +}; + +static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = { + &edma_cc0_info, }; static struct resource edma_resources[] = { @@ -877,6 +879,13 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config, platform_device_register(&vpif_capture_dev); } +int __init dm646x_init_edma(struct edma_rsv_info *rsv) +{ + edma_cc0_info.rsv = rsv; + + return platform_device_register(&dm646x_edma_device); +} + void __init dm646x_init(void) { dm646x_board_setup_refclk(&ref_clk); @@ -888,7 +897,6 @@ static int __init dm646x_init_devices(void) if (!cpu_is_davinci_dm646x()) return 0; - platform_device_register(&dm646x_edma_device); platform_device_register(&dm646x_emac_device); return 0; } diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index d33827aadda7..2ede598b77dd 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -99,8 +99,6 @@ #define EDMA_MAX_DMACH 64 #define EDMA_MAX_PARAMENTRY 512 -#define EDMA_MAX_CC 2 - /*****************************************************************************/ @@ -207,6 +205,18 @@ static inline void edma_parm_or(unsigned ctlr, int offset, int param_no, edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or); } +static inline void set_bits(int offset, int len, unsigned long *p) +{ + for (; len > 0; len--) + set_bit(offset + (len - 1), p); +} + +static inline void clear_bits(int offset, int len, unsigned long *p) +{ + for (; len > 0; len--) + clear_bit(offset + (len - 1), p); +} + /*****************************************************************************/ /* actual number of DMA channels and slots on this silicon */ @@ -1376,11 +1386,13 @@ EXPORT_SYMBOL(edma_clear_event); static int __init edma_probe(struct platform_device *pdev) { - struct edma_soc_info *info = pdev->dev.platform_data; + struct edma_soc_info **info = pdev->dev.platform_data; const s8 (*queue_priority_mapping)[2]; const s8 (*queue_tc_mapping)[2]; - int i, j, found = 0; + int i, j, off, ln, found = 0; int status = -1; + const s16 (*rsv_chans)[2]; + const s16 (*rsv_slots)[2]; int irq[EDMA_MAX_CC] = {0, 0}; int err_irq[EDMA_MAX_CC] = {0, 0}; struct resource *r[EDMA_MAX_CC] = {NULL}; @@ -1395,7 +1407,7 @@ static int __init edma_probe(struct platform_device *pdev) sprintf(res_name, "edma_cc%d", j); r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); - if (!r[j]) { + if (!r[j] || !info[j]) { if (found) break; else @@ -1426,13 +1438,14 @@ static int __init edma_probe(struct platform_device *pdev) } memset(edma_cc[j], 0, sizeof(struct edma)); - edma_cc[j]->num_channels = min_t(unsigned, info[j].n_channel, + edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel, EDMA_MAX_DMACH); - edma_cc[j]->num_slots = min_t(unsigned, info[j].n_slot, + edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot, EDMA_MAX_PARAMENTRY); - edma_cc[j]->num_cc = min_t(unsigned, info[j].n_cc, EDMA_MAX_CC); + edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc, + EDMA_MAX_CC); - edma_cc[j]->default_queue = info[j].default_queue; + edma_cc[j]->default_queue = info[j]->default_queue; if (!edma_cc[j]->default_queue) edma_cc[j]->default_queue = EVENTQ_1; @@ -1447,6 +1460,31 @@ static int __init edma_probe(struct platform_device *pdev) memset(edma_cc[j]->edma_unused, 0xff, sizeof(edma_cc[j]->edma_unused)); + if (info[j]->rsv) { + + /* Clear the reserved channels in unused list */ + rsv_chans = info[j]->rsv->rsv_chans; + if (rsv_chans) { + for (i = 0; rsv_chans[i][0] != -1; i++) { + off = rsv_chans[i][0]; + ln = rsv_chans[i][1]; + clear_bits(off, ln, + edma_cc[j]->edma_unused); + } + } + + /* Set the reserved slots in inuse list */ + rsv_slots = info[j]->rsv->rsv_slots; + if (rsv_slots) { + for (i = 0; rsv_slots[i][0] != -1; i++) { + off = rsv_slots[i][0]; + ln = rsv_slots[i][1]; + set_bits(off, ln, + edma_cc[j]->edma_inuse); + } + } + } + sprintf(irq_name, "edma%d", j); irq[j] = platform_get_irq_byname(pdev, irq_name); edma_cc[j]->irq_res_start = irq[j]; @@ -1476,8 +1514,8 @@ static int __init edma_probe(struct platform_device *pdev) for (i = 0; i < edma_cc[j]->num_channels; i++) map_dmach_queue(j, i, EVENTQ_1); - queue_tc_mapping = info[j].queue_tc_mapping; - queue_priority_mapping = info[j].queue_priority_mapping; + queue_tc_mapping = info[j]->queue_tc_mapping; + queue_priority_mapping = info[j]->queue_priority_mapping; /* Event queue to TC mapping */ for (i = 0; queue_tc_mapping[i][0] != -1; i++) @@ -1496,7 +1534,7 @@ static int __init edma_probe(struct platform_device *pdev) if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST) map_dmach_param(j); - for (i = 0; i < info[j].n_region; i++) { + for (i = 0; i < info[j]->n_region; i++) { edma_write_array2(j, EDMA_DRAE, i, 0, 0x0); edma_write_array2(j, EDMA_DRAE, i, 1, 0x0); edma_write_array(j, EDMA_QRAE, i, 0x0); diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c new file mode 100644 index 000000000000..d10298620e2c --- /dev/null +++ b/arch/arm/mach-davinci/gpio-tnetv107x.c @@ -0,0 +1,205 @@ +/* + * Texas Instruments TNETV107X GPIO Controller + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> + +#include <mach/common.h> +#include <mach/tnetv107x.h> + +struct tnetv107x_gpio_regs { + u32 idver; + u32 data_in[3]; + u32 data_out[3]; + u32 direction[3]; + u32 enable[3]; +}; + +#define gpio_reg_index(gpio) ((gpio) >> 5) +#define gpio_reg_bit(gpio) BIT((gpio) & 0x1f) + +#define gpio_reg_rmw(reg, mask, val) \ + __raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg)) + +#define gpio_reg_set_bit(reg, gpio) \ + gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio)) + +#define gpio_reg_clear_bit(reg, gpio) \ + gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0) + +#define gpio_reg_get_bit(reg, gpio) \ + (__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio)) + +#define chip2controller(chip) \ + container_of(chip, struct davinci_gpio_controller, chip) + +#define TNETV107X_GPIO_CTLRS DIV_ROUND_UP(TNETV107X_N_GPIO, 32) + +static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS]; + +static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + + gpio_reg_set_bit(®s->enable, gpio); + + spin_unlock_irqrestore(&ctlr->lock, flags); + + return 0; +} + +static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + + gpio_reg_clear_bit(®s->enable, gpio); + + spin_unlock_irqrestore(&ctlr->lock, flags); +} + +static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + + gpio_reg_set_bit(®s->direction, gpio); + + spin_unlock_irqrestore(&ctlr->lock, flags); + + return 0; +} + +static int tnetv107x_gpio_dir_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + + if (value) + gpio_reg_set_bit(®s->data_out, gpio); + else + gpio_reg_clear_bit(®s->data_out, gpio); + + gpio_reg_clear_bit(®s->direction, gpio); + + spin_unlock_irqrestore(&ctlr->lock, flags); + + return 0; +} + +static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + int ret; + + ret = gpio_reg_get_bit(®s->data_in, gpio); + + return ret ? 1 : 0; +} + +static void tnetv107x_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct davinci_gpio_controller *ctlr = chip2controller(chip); + struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs; + unsigned gpio = chip->base + offset; + unsigned long flags; + + spin_lock_irqsave(&ctlr->lock, flags); + + if (value) + gpio_reg_set_bit(®s->data_out, gpio); + else + gpio_reg_clear_bit(®s->data_out, gpio); + + spin_unlock_irqrestore(&ctlr->lock, flags); +} + +static int __init tnetv107x_gpio_setup(void) +{ + int i, base; + unsigned ngpio; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct tnetv107x_gpio_regs *regs; + struct davinci_gpio_controller *ctlr; + + if (soc_info->gpio_type != GPIO_TYPE_TNETV107X) + return 0; + + ngpio = soc_info->gpio_num; + if (ngpio == 0) { + pr_err("GPIO setup: how many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(TNETV107X_N_GPIO < ngpio)) + ngpio = TNETV107X_N_GPIO; + + regs = ioremap(soc_info->gpio_base, SZ_4K); + if (WARN_ON(!regs)) + return -EINVAL; + + for (i = 0, base = 0; base < ngpio; i++, base += 32) { + ctlr = &chips[i]; + + ctlr->chip.label = "tnetv107x"; + ctlr->chip.can_sleep = 0; + ctlr->chip.base = base; + ctlr->chip.ngpio = ngpio - base; + if (ctlr->chip.ngpio > 32) + ctlr->chip.ngpio = 32; + + ctlr->chip.request = tnetv107x_gpio_request; + ctlr->chip.free = tnetv107x_gpio_free; + ctlr->chip.direction_input = tnetv107x_gpio_dir_in; + ctlr->chip.get = tnetv107x_gpio_get; + ctlr->chip.direction_output = tnetv107x_gpio_dir_out; + ctlr->chip.set = tnetv107x_gpio_set; + + spin_lock_init(&ctlr->lock); + + ctlr->regs = regs; + ctlr->set_data = ®s->data_out[i]; + ctlr->clr_data = ®s->data_out[i]; + ctlr->in_data = ®s->data_in[i]; + + gpiochip_add(&ctlr->chip); + } + + soc_info->gpio_ctlrs = chips; + soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32); + return 0; +} +pure_initcall(tnetv107x_gpio_setup); diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h index 834725f1e81d..9aa240909a2c 100644 --- a/arch/arm/mach-davinci/include/mach/asp.h +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -52,7 +52,8 @@ struct snd_platform_data { u32 tx_dma_offset; u32 rx_dma_offset; - enum dma_event_q eventq_no; /* event queue number */ + enum dma_event_q asp_chan_q; /* event queue number for ASP channel */ + enum dma_event_q ram_chan_q; /* event queue number for RAM channel */ unsigned int codec_fmt; /* * Allowing this is more efficient and eliminates left and right swaps @@ -63,6 +64,49 @@ struct snd_platform_data { unsigned sram_size_playback; unsigned sram_size_capture; + /* + * If McBSP peripheral gets the clock from an external pin, + * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR + * and MCBSP_CLKS. + * Depending on different hardware connections it is possible + * to use this setting to change the behaviour of McBSP + * driver. The dm365_clk_input_pin enum is available for dm365 + */ + int clk_input_pin; + + /* + * This flag works when both clock and FS are outputs for the cpu + * and makes clock more accurate (FS is not symmetrical and the + * clock is very fast. + * The clock becoming faster is named + * i2s continuous serial clock (I2S_SCK) and it is an externally + * visible bit clock. + * + * first line : WordSelect + * second line : ContinuousSerialClock + * third line: SerialData + * + * SYMMETRICAL APPROACH: + * _______________________ LEFT + * _| RIGHT |______________________| + * _ _ _ _ _ _ _ _ + * _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_ + * _ _ _ _ _ _ _ _ + * _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_ + * \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ + * + * ACCURATE CLOCK APPROACH: + * ______________ LEFT + * _| RIGHT |_______________________________| + * _ _ _ _ _ _ _ _ _ + * _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| | + * _ _ _ _ dummy cycles + * _/ \_ ... _/ \_/ \_ ... _/ \__________________ + * \_/ \_/ \_/ \_/ + * + */ + bool i2s_accurate_sck; + /* McASP specific fields */ int tdm_slots; u8 op_mode; @@ -78,6 +122,11 @@ enum { MCASP_VERSION_2, /* DA8xx/OMAPL1x */ }; +enum dm365_clk_input_pin { + MCBSP_CLKR = 0, /* DM365 */ + MCBSP_CLKS, +}; + #define INACTIVE_MODE 0 #define TX_MODE 1 #define RX_MODE 2 diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 1b31a9aa8fba..3c07059f526e 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -67,7 +67,8 @@ extern void __iomem *da8xx_syscfg1_base; void __init da830_init(void); void __init da850_init(void); -int da8xx_register_edma(void); +int da830_register_edma(struct edma_rsv_info *rsv); +int da850_register_edma(struct edma_rsv_info *rsv[2]); int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata); int da8xx_register_watchdog(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 3cd93a801d9b..f761dfdb8689 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -17,22 +17,50 @@ */ #include <linux/serial_reg.h> + +#include <asm/memory.h> + +#include <mach/serial.h> + #define UART_SHIFT 2 + .pushsection .data +davinci_uart_phys: .word 0 +davinci_uart_virt: .word 0 + .popsection + .macro addruart, rx, tmp + + /* Use davinci_uart_phys/virt if already configured */ +10: mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =__virt_to_phys(davinci_uart_phys) + ldrne \rx, =davinci_uart_virt + ldr \rx, [\rx] + cmp \rx, #0 @ is port configured? + bne 99f @ already configured + mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - moveq \rx, #0x01000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base -#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx) -#error Cannot enable DaVinci and DA8XX platforms concurrently -#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) || \ - defined(CONFIG_MACH_DAVINCI_DA850_EVM) - orr \rx, \rx, #0x00d00000 @ physical base address - orr \rx, \rx, #0x0000d000 @ of UART 2 -#else - orr \rx, \rx, #0x00c20000 @ UART 0 -#endif + + /* Copy uart phys address from decompressor uart info */ + ldreq \tmp, =__virt_to_phys(davinci_uart_phys) + ldrne \tmp, =davinci_uart_phys + ldreq \rx, =DAVINCI_UART_INFO + ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rx, [\rx, #0] + str \rx, [\tmp] + + /* Copy uart virt address from decompressor uart info */ + ldreq \tmp, =__virt_to_phys(davinci_uart_virt) + ldrne \tmp, =davinci_uart_virt + ldreq \rx, =DAVINCI_UART_INFO + ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rx, [\rx, #4] + str \rx, [\tmp] + + b 10b +99: .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index add6f794a362..0a27ee9a70e1 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -32,6 +32,7 @@ void __init dm646x_init(void); void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); void __init dm646x_board_setup_refclk(struct clk *clk); +int __init dm646x_init_edma(struct edma_rsv_info *rsv); void dm646x_video_init(void); diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index ced3092af5ba..dc10ef6cf572 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -230,6 +230,8 @@ enum sync_dimension { #define EDMA_CONT_PARAMS_FIXED_EXACT 1002 #define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003 +#define EDMA_MAX_CC 2 + /* alloc/free DMA channels and their dedicated parameter RAM slots */ int edma_alloc_channel(int channel, void (*callback)(unsigned channel, u16 ch_status, void *data), @@ -269,6 +271,12 @@ void edma_clear_event(unsigned channel); void edma_pause(unsigned channel); void edma_resume(unsigned channel); +struct edma_rsv_info { + + const s16 (*rsv_chans)[2]; + const s16 (*rsv_slots)[2]; +}; + /* platform_data for EDMA driver */ struct edma_soc_info { @@ -280,6 +288,9 @@ struct edma_soc_info { unsigned n_cc; enum dma_event_q default_queue; + /* Resource reservation for other cores */ + struct edma_rsv_info *rsv; + const s8 (*queue_tc_mapping)[2]; const s8 (*queue_priority_mapping)[2]; }; diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index 504cc180a60b..fbece126c2bf 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -25,6 +25,7 @@ enum davinci_gpio_type { GPIO_TYPE_DAVINCI = 0, + GPIO_TYPE_TNETV107X, }; /* @@ -87,9 +88,13 @@ static inline u32 __gpio_mask(unsigned gpio) return 1 << (gpio % 32); } -/* The get/set/clear functions will inline when called with constant +/* + * The get/set/clear functions will inline when called with constant * parameters referencing built-in GPIOs, for low-overhead bitbanging. * + * gpio_set_value() will inline only on traditional Davinci style controllers + * with distinct set/clear registers. + * * Otherwise, calls with variable parameters or referencing external * GPIOs (e.g. on GPIO expander chips) use outlined functions. */ @@ -100,12 +105,15 @@ static inline void gpio_set_value(unsigned gpio, int value) u32 mask; ctlr = __gpio_to_controller(gpio); - mask = __gpio_mask(gpio); - if (value) - __raw_writel(mask, ctlr->set_data); - else - __raw_writel(mask, ctlr->clr_data); - return; + + if (ctlr->set_data != ctlr->clr_data) { + mask = __gpio_mask(gpio); + if (value) + __raw_writel(mask, ctlr->set_data); + else + __raw_writel(mask, ctlr->clr_data); + return; + } } __gpio_set_value(gpio, value); diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index f6c4f34909a2..8051110b8ac3 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -11,8 +11,19 @@ #ifndef __ASM_ARCH_SERIAL_H #define __ASM_ARCH_SERIAL_H +#include <asm/memory.h> + #include <mach/hardware.h> +/* + * Stolen area that contains debug uart physical and virtual addresses. These + * addresses are filled in by the uncompress.h code, and are used by the debug + * macros in debug-macro.S. + * + * This area sits just below the page tables (see arch/arm/kernel/head.S). + */ +#define DAVINCI_UART_INFO (PHYS_OFFSET + 0x3ff8) + #define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) @@ -21,16 +32,26 @@ #define DA8XX_UART1_BASE (IO_PHYS + 0x10c000) #define DA8XX_UART2_BASE (IO_PHYS + 0x10d000) +#define TNETV107X_UART0_BASE 0x08108100 +#define TNETV107X_UART1_BASE 0x08088400 +#define TNETV107X_UART2_BASE 0x08108300 + +#define TNETV107X_UART0_VIRT IOMEM(0xfee08100) +#define TNETV107X_UART1_VIRT IOMEM(0xfed88400) +#define TNETV107X_UART2_VIRT IOMEM(0xfee08300) + /* DaVinci UART register offsets */ #define UART_DAVINCI_PWREMU 0x0c #define UART_DM646X_SCR 0x10 #define UART_DM646X_SCR_TX_WATERMARK 0x08 +#ifndef __ASSEMBLY__ struct davinci_uart_config { /* Bit field of UARTs present; bit 0 --> UART1 */ unsigned int enabled_uarts; }; extern int davinci_serial_init(struct davinci_uart_config *); +#endif #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h new file mode 100644 index 000000000000..c72064733123 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h @@ -0,0 +1,55 @@ +/* + * Texas Instruments TNETV107X SoC Specific Defines + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __ASM_ARCH_DAVINCI_TNETV107X_H +#define __ASM_ARCH_DAVINCI_TNETV107X_H + +#include <asm/sizes.h> + +#define TNETV107X_DDR_BASE 0x80000000 + +/* + * Fixed mapping for early init starts here. If low-level debug is enabled, + * this area also gets mapped via io_pg_offset and io_phys by the boot code. + * To fit in with the io_pg_offset calculation, the io base address selected + * here _must_ be a multiple of 2^20. + */ +#define TNETV107X_IO_BASE 0x08000000 +#define TNETV107X_IO_VIRT (IO_VIRT + SZ_1M) + +#define TNETV107X_N_GPIO 65 + +#ifndef __ASSEMBLY__ + +#include <linux/serial_8250.h> +#include <mach/mmc.h> +#include <mach/nand.h> +#include <mach/serial.h> + +struct tnetv107x_device_info { + struct davinci_uart_config *serial_config; + struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */ + struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */ +}; + +extern struct platform_device tnetv107x_wdt_device; +extern struct platform_device tnetv107x_serial_device; + +extern void __init tnetv107x_init(void); +extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *); +extern void __init tnetv107x_irq_init(void); + +#endif + +#endif /* __ASM_ARCH_DAVINCI_TNETV107X_H */ diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 33796b4db17f..15a6192ad6eb 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -1,8 +1,17 @@ /* * Serial port stubs for kernel decompress status messages * - * Author: Anant Gole - * (C) Copyright (C) 2006, Texas Instruments, Inc + * Initially based on: + * arch/arm/plat-omap/include/mach/uncompress.h + * + * Original copyrights follow. + * + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Rewritten by: + * Author: <source@mvista.com> + * 2004 (c) MontaVista Software, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -11,30 +20,17 @@ #include <linux/types.h> #include <linux/serial_reg.h> -#include <mach/serial.h> #include <asm/mach-types.h> -extern unsigned int __machine_arch_type; +#include <mach/serial.h> static u32 *uart; - -static u32 *get_uart_base(void) -{ - if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM || - __machine_arch_type == MACH_TYPE_DAVINCI_DA850_EVM) - return (u32 *)DA8XX_UART2_BASE; - else - return (u32 *)DAVINCI_UART0_BASE; -} +static u32 *uart_info = (u32 *)(DAVINCI_UART_INFO); /* PORT_16C550A, in polled non-fifo mode */ - static void putc(char c) { - if (!uart) - uart = get_uart_base(); - while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); uart[UART_TX] = c; @@ -42,12 +38,61 @@ static void putc(char c) static inline void flush(void) { - if (!uart) - uart = get_uart_base(); - while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } -#define arch_decomp_setup() +static inline void set_uart_info(u32 phys, void * __iomem virt) +{ + uart = (u32 *)phys; + uart_info[0] = phys; + uart_info[1] = (u32)virt; +} + +#define _DEBUG_LL_ENTRY(machine, phys, virt) \ + if (machine_is_##machine()) { \ + set_uart_info(phys, virt); \ + break; \ + } + +#define DEBUG_LL_DAVINCI(machine, port) \ + _DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE, \ + IO_ADDRESS(DAVINCI_UART##port##_BASE)) + +#define DEBUG_LL_DA8XX(machine, port) \ + _DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE, \ + IO_ADDRESS(DA8XX_UART##port##_BASE)) + +#define DEBUG_LL_TNETV107X(machine, port) \ + _DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE, \ + TNETV107X_UART##port##_VIRT) + +static inline void __arch_decomp_setup(unsigned long arch_id) +{ + /* + * Initialize the port based on the machine ID from the bootloader. + * Note that we're using macros here instead of switch statement + * as machine_is functions are optimized out for the boards that + * are not selected. + */ + do { + /* Davinci boards */ + DEBUG_LL_DAVINCI(davinci_evm, 0); + DEBUG_LL_DAVINCI(sffsdr, 0); + DEBUG_LL_DAVINCI(neuros_osd2, 0); + DEBUG_LL_DAVINCI(davinci_dm355_evm, 0); + DEBUG_LL_DAVINCI(dm355_leopard, 0); + DEBUG_LL_DAVINCI(davinci_dm6467_evm, 0); + DEBUG_LL_DAVINCI(davinci_dm365_evm, 0); + + /* DA8xx boards */ + DEBUG_LL_DA8XX(davinci_da830_evm, 2); + DEBUG_LL_DA8XX(davinci_da850_evm, 2); + + /* TNETV107x boards */ + DEBUG_LL_TNETV107X(tnetv107x, 1); + } while (0); +} + +#define arch_decomp_setup() __arch_decomp_setup(arch_id) #define arch_decomp_wdog() diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c new file mode 100644 index 000000000000..864e60482c53 --- /dev/null +++ b/arch/arm/mach-davinci/tnetv107x.c @@ -0,0 +1,753 @@ +/* + * Texas Instruments TNETV107X SoC Support + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/platform_device.h> + +#include <asm/mach/map.h> + +#include <mach/common.h> +#include <mach/time.h> +#include <mach/cputype.h> +#include <mach/psc.h> +#include <mach/cp_intc.h> +#include <mach/irqs.h> +#include <mach/gpio.h> +#include <mach/hardware.h> +#include <mach/tnetv107x.h> + +#include "clock.h" +#include "mux.h" + +/* Base addresses for on-chip devices */ +#define TNETV107X_INTC_BASE 0x03000000 +#define TNETV107X_TIMER0_BASE 0x08086500 +#define TNETV107X_TIMER1_BASE 0x08086600 +#define TNETV107X_CHIP_CFG_BASE 0x08087000 +#define TNETV107X_GPIO_BASE 0x08088000 +#define TNETV107X_CLOCK_CONTROL_BASE 0x0808a000 +#define TNETV107X_PSC_BASE 0x0808b000 + +/* Reference clock frequencies */ +#define OSC_FREQ_ONCHIP (24000 * 1000) +#define OSC_FREQ_OFFCHIP_SYS (25000 * 1000) +#define OSC_FREQ_OFFCHIP_ETH (25000 * 1000) +#define OSC_FREQ_OFFCHIP_TDM (19200 * 1000) + +#define N_PLLS 3 + +/* Clock Control Registers */ +struct clk_ctrl_regs { + u32 pll_bypass; + u32 _reserved0; + u32 gem_lrst; + u32 _reserved1; + u32 pll_unlock_stat; + u32 sys_unlock; + u32 eth_unlock; + u32 tdm_unlock; +}; + +/* SSPLL Registers */ +struct sspll_regs { + u32 modes; + u32 post_div; + u32 pre_div; + u32 mult_factor; + u32 divider_range; + u32 bw_divider; + u32 spr_amount; + u32 spr_rate_div; + u32 diag; +}; + +/* Watchdog Timer Registers */ +struct wdt_regs { + u32 kick_lock; + u32 kick; + u32 change_lock; + u32 change ; + u32 disable_lock; + u32 disable; + u32 prescale_lock; + u32 prescale; +}; + +static struct clk_ctrl_regs __iomem *clk_ctrl_regs; + +static struct sspll_regs __iomem *sspll_regs[N_PLLS]; +static int sspll_regs_base[N_PLLS] = { 0x40, 0x80, 0xc0 }; + +/* PLL bypass bit shifts in clk_ctrl_regs->pll_bypass register */ +static u32 bypass_mask[N_PLLS] = { BIT(0), BIT(2), BIT(1) }; + +/* offchip (external) reference clock frequencies */ +static u32 pll_ext_freq[] = { + OSC_FREQ_OFFCHIP_SYS, + OSC_FREQ_OFFCHIP_TDM, + OSC_FREQ_OFFCHIP_ETH +}; + +/* PSC control registers */ +static u32 psc_regs[] __initconst = { TNETV107X_PSC_BASE }; + +/* Host map for interrupt controller */ +static u32 intc_host_map[] = { 0x01010000, 0x01010101, -1 }; + +static unsigned long clk_sspll_recalc(struct clk *clk); + +/* Level 1 - the PLLs */ +#define define_pll_clk(cname, pll, divmask, base) \ + static struct pll_data pll_##cname##_data = { \ + .num = pll, \ + .div_ratio_mask = divmask, \ + .phys_base = base + \ + TNETV107X_CLOCK_CONTROL_BASE, \ + }; \ + static struct clk pll_##cname##_clk = { \ + .name = "pll_" #cname "_clk", \ + .pll_data = &pll_##cname##_data, \ + .flags = CLK_PLL, \ + .recalc = clk_sspll_recalc, \ + } + +define_pll_clk(sys, 0, 0x1ff, 0x600); +define_pll_clk(tdm, 1, 0x0ff, 0x200); +define_pll_clk(eth, 2, 0x0ff, 0x400); + +/* Level 2 - divided outputs from the PLLs */ +#define define_pll_div_clk(pll, cname, div) \ + static struct clk pll##_##cname##_clk = { \ + .name = #pll "_" #cname "_clk",\ + .parent = &pll_##pll##_clk, \ + .flags = CLK_PLL, \ + .div_reg = PLLDIV##div, \ + } + +define_pll_div_clk(sys, arm1176, 1); +define_pll_div_clk(sys, dsp, 2); +define_pll_div_clk(sys, ddr, 3); +define_pll_div_clk(sys, full, 4); +define_pll_div_clk(sys, lcd, 5); +define_pll_div_clk(sys, vlynq_ref, 6); +define_pll_div_clk(sys, tsc, 7); +define_pll_div_clk(sys, half, 8); + +define_pll_div_clk(eth, 5mhz, 1); +define_pll_div_clk(eth, 50mhz, 2); +define_pll_div_clk(eth, 125mhz, 3); +define_pll_div_clk(eth, 250mhz, 4); +define_pll_div_clk(eth, 25mhz, 5); + +define_pll_div_clk(tdm, 0, 1); +define_pll_div_clk(tdm, extra, 2); +define_pll_div_clk(tdm, 1, 3); + + +/* Level 3 - LPSC gated clocks */ +#define __lpsc_clk(cname, _parent, mod, flg) \ + static struct clk clk_##cname = { \ + .name = #cname, \ + .parent = &_parent, \ + .lpsc = TNETV107X_LPSC_##mod,\ + .flags = flg, \ + } + +#define lpsc_clk_enabled(cname, parent, mod) \ + __lpsc_clk(cname, parent, mod, ALWAYS_ENABLED) + +#define lpsc_clk(cname, parent, mod) \ + __lpsc_clk(cname, parent, mod, 0) + +lpsc_clk_enabled(arm, sys_arm1176_clk, ARM); +lpsc_clk_enabled(gem, sys_dsp_clk, GEM); +lpsc_clk_enabled(ddr2_phy, sys_ddr_clk, DDR2_PHY); +lpsc_clk_enabled(tpcc, sys_full_clk, TPCC); +lpsc_clk_enabled(tptc0, sys_full_clk, TPTC0); +lpsc_clk_enabled(tptc1, sys_full_clk, TPTC1); +lpsc_clk_enabled(ram, sys_full_clk, RAM); +lpsc_clk_enabled(aemif, sys_full_clk, AEMIF); +lpsc_clk_enabled(chipcfg, sys_half_clk, CHIP_CFG); +lpsc_clk_enabled(rom, sys_half_clk, ROM); +lpsc_clk_enabled(secctl, sys_half_clk, SECCTL); +lpsc_clk_enabled(keymgr, sys_half_clk, KEYMGR); +lpsc_clk_enabled(gpio, sys_half_clk, GPIO); +lpsc_clk_enabled(debugss, sys_half_clk, DEBUGSS); +lpsc_clk_enabled(system, sys_half_clk, SYSTEM); +lpsc_clk_enabled(ddr2_vrst, sys_ddr_clk, DDR2_EMIF1_VRST); +lpsc_clk_enabled(ddr2_vctl_rst, sys_ddr_clk, DDR2_EMIF2_VCTL_RST); +lpsc_clk_enabled(wdt_arm, sys_half_clk, WDT_ARM); + +lpsc_clk(mbx_lite, sys_arm1176_clk, MBX_LITE); +lpsc_clk(ethss, eth_125mhz_clk, ETHSS); +lpsc_clk(tsc, sys_tsc_clk, TSC); +lpsc_clk(uart0, sys_half_clk, UART0); +lpsc_clk(uart1, sys_half_clk, UART1); +lpsc_clk(uart2, sys_half_clk, UART2); +lpsc_clk(pktsec, sys_half_clk, PKTSEC); +lpsc_clk(keypad, sys_half_clk, KEYPAD); +lpsc_clk(mdio, sys_half_clk, MDIO); +lpsc_clk(sdio0, sys_half_clk, SDIO0); +lpsc_clk(sdio1, sys_half_clk, SDIO1); +lpsc_clk(timer0, sys_half_clk, TIMER0); +lpsc_clk(timer1, sys_half_clk, TIMER1); +lpsc_clk(wdt_dsp, sys_half_clk, WDT_DSP); +lpsc_clk(ssp, sys_half_clk, SSP); +lpsc_clk(tdm0, tdm_0_clk, TDM0); +lpsc_clk(tdm1, tdm_1_clk, TDM1); +lpsc_clk(vlynq, sys_vlynq_ref_clk, VLYNQ); +lpsc_clk(mcdma, sys_half_clk, MCDMA); +lpsc_clk(usb0, sys_half_clk, USB0); +lpsc_clk(usb1, sys_half_clk, USB1); +lpsc_clk(usbss, sys_half_clk, USBSS); +lpsc_clk(ethss_rgmii, eth_250mhz_clk, ETHSS_RGMII); +lpsc_clk(imcop, sys_dsp_clk, IMCOP); +lpsc_clk(spare, sys_half_clk, SPARE); + +/* LCD needs a full power down to clear controller state */ +__lpsc_clk(lcd, sys_lcd_clk, LCD, PSC_SWRSTDISABLE); + + +/* Level 4 - leaf clocks for LPSC modules shared across drivers */ +static struct clk clk_rng = { .name = "rng", .parent = &clk_pktsec }; +static struct clk clk_pka = { .name = "pka", .parent = &clk_pktsec }; + +static struct clk_lookup clks[] = { + CLK(NULL, "pll_sys_clk", &pll_sys_clk), + CLK(NULL, "pll_eth_clk", &pll_eth_clk), + CLK(NULL, "pll_tdm_clk", &pll_tdm_clk), + CLK(NULL, "sys_arm1176_clk", &sys_arm1176_clk), + CLK(NULL, "sys_dsp_clk", &sys_dsp_clk), + CLK(NULL, "sys_ddr_clk", &sys_ddr_clk), + CLK(NULL, "sys_full_clk", &sys_full_clk), + CLK(NULL, "sys_lcd_clk", &sys_lcd_clk), + CLK(NULL, "sys_vlynq_ref_clk", &sys_vlynq_ref_clk), + CLK(NULL, "sys_tsc_clk", &sys_tsc_clk), + CLK(NULL, "sys_half_clk", &sys_half_clk), + CLK(NULL, "eth_5mhz_clk", ð_5mhz_clk), + CLK(NULL, "eth_50mhz_clk", ð_50mhz_clk), + CLK(NULL, "eth_125mhz_clk", ð_125mhz_clk), + CLK(NULL, "eth_250mhz_clk", ð_250mhz_clk), + CLK(NULL, "eth_25mhz_clk", ð_25mhz_clk), + CLK(NULL, "tdm_0_clk", &tdm_0_clk), + CLK(NULL, "tdm_extra_clk", &tdm_extra_clk), + CLK(NULL, "tdm_1_clk", &tdm_1_clk), + CLK(NULL, "clk_arm", &clk_arm), + CLK(NULL, "clk_gem", &clk_gem), + CLK(NULL, "clk_ddr2_phy", &clk_ddr2_phy), + CLK(NULL, "clk_tpcc", &clk_tpcc), + CLK(NULL, "clk_tptc0", &clk_tptc0), + CLK(NULL, "clk_tptc1", &clk_tptc1), + CLK(NULL, "clk_ram", &clk_ram), + CLK(NULL, "clk_mbx_lite", &clk_mbx_lite), + CLK("tnetv107x-fb.0", NULL, &clk_lcd), + CLK(NULL, "clk_ethss", &clk_ethss), + CLK(NULL, "aemif", &clk_aemif), + CLK(NULL, "clk_chipcfg", &clk_chipcfg), + CLK("tnetv107x-ts.0", NULL, &clk_tsc), + CLK(NULL, "clk_rom", &clk_rom), + CLK(NULL, "uart2", &clk_uart2), + CLK(NULL, "clk_pktsec", &clk_pktsec), + CLK("tnetv107x-rng.0", NULL, &clk_rng), + CLK("tnetv107x-pka.0", NULL, &clk_pka), + CLK(NULL, "clk_secctl", &clk_secctl), + CLK(NULL, "clk_keymgr", &clk_keymgr), + CLK("tnetv107x-keypad.0", NULL, &clk_keypad), + CLK(NULL, "clk_gpio", &clk_gpio), + CLK(NULL, "clk_mdio", &clk_mdio), + CLK("davinci_mmc.0", NULL, &clk_sdio0), + CLK(NULL, "uart0", &clk_uart0), + CLK(NULL, "uart1", &clk_uart1), + CLK(NULL, "timer0", &clk_timer0), + CLK(NULL, "timer1", &clk_timer1), + CLK("tnetv107x_wdt.0", NULL, &clk_wdt_arm), + CLK(NULL, "clk_wdt_dsp", &clk_wdt_dsp), + CLK("ti-ssp.0", NULL, &clk_ssp), + CLK(NULL, "clk_tdm0", &clk_tdm0), + CLK(NULL, "clk_vlynq", &clk_vlynq), + CLK(NULL, "clk_mcdma", &clk_mcdma), + CLK(NULL, "clk_usb0", &clk_usb0), + CLK(NULL, "clk_tdm1", &clk_tdm1), + CLK(NULL, "clk_debugss", &clk_debugss), + CLK(NULL, "clk_ethss_rgmii", &clk_ethss_rgmii), + CLK(NULL, "clk_system", &clk_system), + CLK(NULL, "clk_imcop", &clk_imcop), + CLK(NULL, "clk_spare", &clk_spare), + CLK("davinci_mmc.1", NULL, &clk_sdio1), + CLK(NULL, "clk_usb1", &clk_usb1), + CLK(NULL, "clk_usbss", &clk_usbss), + CLK(NULL, "clk_ddr2_vrst", &clk_ddr2_vrst), + CLK(NULL, "clk_ddr2_vctl_rst", &clk_ddr2_vctl_rst), + CLK(NULL, NULL, NULL), +}; + +static const struct mux_config pins[] = { +#ifdef CONFIG_DAVINCI_MUX + MUX_CFG(TNETV107X, ASR_A00, 0, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO32, 0, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A01, 0, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO33, 0, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A02, 0, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO34, 0, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A03, 0, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO35, 0, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A04, 0, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO36, 0, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A05, 0, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO37, 0, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A06, 1, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO38, 1, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A07, 1, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO39, 1, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A08, 1, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO40, 1, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A09, 1, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO41, 1, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A10, 1, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO42, 1, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A11, 1, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, BOOT_STRP_0, 1, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A12, 2, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, BOOT_STRP_1, 2, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A13, 2, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO43, 2, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A14, 2, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO44, 2, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A15, 2, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO45, 2, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A16, 2, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO46, 2, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A17, 2, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO47, 2, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_A18, 3, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO48, 3, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_DATA3_0, 3, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_A19, 3, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO49, 3, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_DATA2_0, 3, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_A20, 3, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO50, 3, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_DATA1_0, 3, 10, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_A21, 3, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO51, 3, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_DATA0_0, 3, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_A22, 3, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO52, 3, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_CMD_0, 3, 20, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_A23, 3, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO53, 3, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO1_CLK_0, 3, 25, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_BA_1, 4, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO54, 4, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SYS_PLL_CLK, 4, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_CS0, 4, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, ASR_CS1, 4, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, ASR_CS2, 4, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM_PLL_CLK, 4, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_CS3, 4, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, ETH_PHY_CLK, 4, 20, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, ASR_D00, 4, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO55, 4, 25, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D01, 5, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO56, 5, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D02, 5, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO57, 5, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D03, 5, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO58, 5, 10, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D04, 5, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO59_0, 5, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D05, 5, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO60_0, 5, 20, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D06, 5, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO61_0, 5, 25, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D07, 6, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO62_0, 6, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D08, 6, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO63_0, 6, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D09, 6, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO64_0, 6, 10, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D10, 6, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_DATA3_1, 6, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D11, 6, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_DATA2_1, 6, 20, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D12, 6, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_DATA1_1, 6, 25, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D13, 7, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_DATA0_1, 7, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D14, 7, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_CMD_1, 7, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_D15, 7, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SDIO1_CLK_1, 7, 10, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_OE, 7, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, BOOT_STRP_2, 7, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_RNW, 7, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO29_0, 7, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_WAIT, 7, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO30_0, 7, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_WE, 8, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, BOOT_STRP_3, 8, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, ASR_WE_DQM0, 8, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO31, 8, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD17_0, 8, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, ASR_WE_DQM1, 8, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, ASR_BA0_0, 8, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, VLYNQ_CLK, 9, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO14, 9, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD19_0, 9, 0, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, VLYNQ_RXD0, 9, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO15, 9, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD20_0, 9, 5, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, VLYNQ_RXD1, 9, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO16, 9, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD21_0, 9, 10, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, VLYNQ_TXD0, 9, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO17, 9, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD22_0, 9, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, VLYNQ_TXD1, 9, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO18, 9, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD23_0, 9, 20, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, SDIO0_CLK, 10, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO19, 10, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO0_CMD, 10, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO20, 10, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO0_DATA0, 10, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO21, 10, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO0_DATA1, 10, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO22, 10, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO0_DATA2, 10, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO23, 10, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SDIO0_DATA3, 10, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO24, 10, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, EMU0, 11, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, EMU1, 11, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, RTCK, 12, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TRST_N, 12, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TCK, 12, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDI, 12, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDO, 12, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TMS, 12, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM1_CLK, 13, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM1_RX, 13, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM1_TX, 13, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM1_FS, 13, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R0, 14, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R1, 14, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R2, 14, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R3, 14, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R4, 14, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R5, 14, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_R6, 15, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO12, 15, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, KEYPAD_R7, 15, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO10, 15, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, KEYPAD_C0, 15, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C1, 15, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C2, 15, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C3, 15, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C4, 16, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C5, 16, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, KEYPAD_C6, 16, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO13, 16, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, TEST_CLK_IN, 16, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, KEYPAD_C7, 16, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO11, 16, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, SSP0_0, 17, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SCC_DCLK, 17, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD20_1, 17, 0, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP0_1, 17, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SCC_CS_N, 17, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD21_1, 17, 5, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP0_2, 17, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SCC_D, 17, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD22_1, 17, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP0_3, 17, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, SCC_RESETN, 17, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, LCD_PD23_1, 17, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP1_0, 18, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO25, 18, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, UART2_CTS, 18, 0, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP1_1, 18, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO26, 18, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, UART2_RD, 18, 5, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP1_2, 18, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO27, 18, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, UART2_RTS, 18, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, SSP1_3, 18, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO28, 18, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, UART2_TD, 18, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, UART0_CTS, 19, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, UART0_RD, 19, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, UART0_RTS, 19, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, UART0_TD, 19, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, UART1_RD, 19, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, UART1_TD, 19, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_AC_NCS, 20, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_HSYNC_RNW, 20, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_VSYNC_A0, 20, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_MCLK, 20, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD16_0, 20, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PCLK_E, 20, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD00, 20, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD01, 21, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD02, 21, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD03, 21, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD04, 21, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD05, 21, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD06, 21, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD07, 22, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD08, 22, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO59_1, 22, 5, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD09, 22, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO60_1, 22, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD10, 22, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, ASR_BA0_1, 22, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, GPIO61_1, 22, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD11, 22, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO62_1, 22, 20, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD12, 22, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO63_1, 22, 25, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD13, 23, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO64_1, 23, 0, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD14, 23, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO29_1, 23, 5, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, LCD_PD15, 23, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO30_1, 23, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, EINT0, 24, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO08, 24, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, EINT1, 24, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, GPIO09, 24, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, GPIO00, 24, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD20_2, 24, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, TDM_CLK_IN_2, 24, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, GPIO01, 24, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD21_2, 24, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, 24M_CLK_OUT_1, 24, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, GPIO02, 24, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD22_2, 24, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, GPIO03, 24, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD23_2, 24, 25, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, GPIO04, 25, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD16_1, 25, 0, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, USB0_RXERR, 25, 0, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, GPIO05, 25, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD17_1, 25, 5, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, TDM_CLK_IN_1, 25, 5, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, GPIO06, 25, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD18, 25, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, 24M_CLK_OUT_2, 25, 10, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, GPIO07, 25, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, LCD_PD19_1, 25, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, USB1_RXERR, 25, 15, 0x1f, 0x0c, false) + MUX_CFG(TNETV107X, ETH_PLL_CLK, 25, 15, 0x1f, 0x1c, false) + MUX_CFG(TNETV107X, MDIO, 26, 0, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, MDC, 26, 5, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, AIC_MUTE_STAT_N, 26, 10, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM0_CLK, 26, 10, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, AIC_HNS_EN_N, 26, 15, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM0_FS, 26, 15, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, AIC_HDS_EN_STAT_N, 26, 20, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM0_TX, 26, 20, 0x1f, 0x04, false) + MUX_CFG(TNETV107X, AIC_HNF_EN_STAT_N, 26, 25, 0x1f, 0x00, false) + MUX_CFG(TNETV107X, TDM0_RX, 26, 25, 0x1f, 0x04, false) +#endif +}; + +/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ +static u8 irq_prios[TNETV107X_N_CP_INTC_IRQ] = { + /* fill in default priority 7 */ + [0 ... (TNETV107X_N_CP_INTC_IRQ - 1)] = 7, + /* now override as needed, e.g. [xxx] = 5 */ +}; + +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id ids[] = { + { + .variant = 0x0, + .part_no = 0xb8a1, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_TNETV107X, + .name = "tnetv107x rev1.0", + }, +}; + +static struct davinci_timer_instance timer_instance[2] = { + { + .base = TNETV107X_TIMER0_BASE, + .bottom_irq = IRQ_TNETV107X_TIMER_0_TINT12, + .top_irq = IRQ_TNETV107X_TIMER_0_TINT34, + }, + { + .base = TNETV107X_TIMER1_BASE, + .bottom_irq = IRQ_TNETV107X_TIMER_1_TINT12, + .top_irq = IRQ_TNETV107X_TIMER_1_TINT34, + }, +}; + +static struct davinci_timer_info timer_info = { + .timers = timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + +/* + * TNETV107X platforms do not use the static mappings from Davinci + * IO_PHYS/IO_VIRT. This SOC's interesting MMRs are at different addresses, + * and changing IO_PHYS would break away from existing Davinci SOCs. + * + * The primary impact of the current model is that IO_ADDRESS() is not to be + * used to map registers on TNETV107X. + * + * 1. The first chunk is for INTC: This needs to be mapped in via iotable + * because ioremap() does not seem to be operational at the time when + * irqs are initialized. Without this, consistent dma init bombs. + * + * 2. The second chunk maps in register areas that need to be populated into + * davinci_soc_info. Note that alignment restrictions come into play if + * low-level debug is enabled (see note in <mach/tnetv107x.h>). + */ +static struct map_desc io_desc[] = { + { /* INTC */ + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(TNETV107X_INTC_BASE), + .length = SZ_16K, + .type = MT_DEVICE + }, + { /* Most of the rest */ + .virtual = TNETV107X_IO_VIRT, + .pfn = __phys_to_pfn(TNETV107X_IO_BASE), + .length = IO_SIZE - SZ_1M, + .type = MT_DEVICE + }, +}; + +static unsigned long clk_sspll_recalc(struct clk *clk) +{ + int pll; + unsigned long mult = 0, prediv = 1, postdiv = 1; + unsigned long ref = OSC_FREQ_ONCHIP, ret; + u32 tmp; + + if (WARN_ON(!clk->pll_data)) + return clk->rate; + + if (!clk_ctrl_regs) { + void __iomem *tmp; + + tmp = ioremap(TNETV107X_CLOCK_CONTROL_BASE, SZ_4K); + + if (WARN(!tmp, "failed ioremap for clock control regs\n")) + return clk->parent ? clk->parent->rate : 0; + + for (pll = 0; pll < N_PLLS; pll++) + sspll_regs[pll] = tmp + sspll_regs_base[pll]; + + clk_ctrl_regs = tmp; + } + + pll = clk->pll_data->num; + + tmp = __raw_readl(&clk_ctrl_regs->pll_bypass); + if (!(tmp & bypass_mask[pll])) { + mult = __raw_readl(&sspll_regs[pll]->mult_factor); + prediv = __raw_readl(&sspll_regs[pll]->pre_div) + 1; + postdiv = __raw_readl(&sspll_regs[pll]->post_div) + 1; + } + + tmp = __raw_readl(clk->pll_data->base + PLLCTL); + if (tmp & PLLCTL_CLKMODE) + ref = pll_ext_freq[pll]; + + clk->pll_data->input_rate = ref; + + tmp = __raw_readl(clk->pll_data->base + PLLCTL); + if (!(tmp & PLLCTL_PLLEN)) + return ref; + + ret = ref; + if (mult) + ret += ((unsigned long long)ref * mult) / 256; + + ret /= (prediv * postdiv); + + return ret; +} + +static void tnetv107x_watchdog_reset(struct platform_device *pdev) +{ + struct wdt_regs __iomem *regs; + + regs = ioremap(pdev->resource[0].start, SZ_4K); + + /* disable watchdog */ + __raw_writel(0x7777, ®s->disable_lock); + __raw_writel(0xcccc, ®s->disable_lock); + __raw_writel(0xdddd, ®s->disable_lock); + __raw_writel(0, ®s->disable); + + /* program prescale */ + __raw_writel(0x5a5a, ®s->prescale_lock); + __raw_writel(0xa5a5, ®s->prescale_lock); + __raw_writel(0, ®s->prescale); + + /* program countdown */ + __raw_writel(0x6666, ®s->change_lock); + __raw_writel(0xbbbb, ®s->change_lock); + __raw_writel(1, ®s->change); + + /* enable watchdog */ + __raw_writel(0x7777, ®s->disable_lock); + __raw_writel(0xcccc, ®s->disable_lock); + __raw_writel(0xdddd, ®s->disable_lock); + __raw_writel(1, ®s->disable); + + /* kick */ + __raw_writel(0x5555, ®s->kick_lock); + __raw_writel(0xaaaa, ®s->kick_lock); + __raw_writel(1, ®s->kick); +} + +static struct davinci_soc_info tnetv107x_soc_info = { + .io_desc = io_desc, + .io_desc_num = ARRAY_SIZE(io_desc), + .ids = ids, + .ids_num = ARRAY_SIZE(ids), + .jtag_id_reg = TNETV107X_CHIP_CFG_BASE + 0x018, + .cpu_clks = clks, + .psc_bases = psc_regs, + .psc_bases_num = ARRAY_SIZE(psc_regs), + .pinmux_base = TNETV107X_CHIP_CFG_BASE + 0x150, + .pinmux_pins = pins, + .pinmux_pins_num = ARRAY_SIZE(pins), + .intc_type = DAVINCI_INTC_TYPE_CP_INTC, + .intc_base = TNETV107X_INTC_BASE, + .intc_irq_prios = irq_prios, + .intc_irq_num = TNETV107X_N_CP_INTC_IRQ, + .intc_host_map = intc_host_map, + .gpio_base = TNETV107X_GPIO_BASE, + .gpio_type = GPIO_TYPE_TNETV107X, + .gpio_num = TNETV107X_N_GPIO, + .timer_info = &timer_info, + .serial_dev = &tnetv107x_serial_device, + .reset = tnetv107x_watchdog_reset, + .reset_device = &tnetv107x_wdt_device, +}; + +void __init tnetv107x_init(void) +{ + davinci_common_init(&tnetv107x_soc_info); +} diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 7f3039761d91..8bf3cec98cfa 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -43,7 +43,8 @@ static unsigned long get_uart_rate(struct clk *clk); static int set_keytchclk_rate(struct clk *clk, unsigned long rate); static int set_div_rate(struct clk *clk, unsigned long rate); - +static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate); +static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate); static struct clk clk_xtali = { .rate = EP93XX_EXT_CLK_RATE, @@ -112,6 +113,29 @@ static struct clk clk_video = { .set_rate = set_div_rate, }; +static struct clk clk_i2s_mclk = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_I2SCLKDIV, + .enable_mask = EP93XX_SYSCON_CLKDIV_ENABLE, + .set_rate = set_div_rate, +}; + +static struct clk clk_i2s_sclk = { + .sw_locked = 1, + .parent = &clk_i2s_mclk, + .enable_reg = EP93XX_SYSCON_I2SCLKDIV, + .enable_mask = EP93XX_SYSCON_I2SCLKDIV_SENA, + .set_rate = set_i2s_sclk_rate, +}; + +static struct clk clk_i2s_lrclk = { + .sw_locked = 1, + .parent = &clk_i2s_sclk, + .enable_reg = EP93XX_SYSCON_I2SCLKDIV, + .enable_mask = EP93XX_SYSCON_I2SCLKDIV_SENA, + .set_rate = set_i2s_lrclk_rate, +}; + /* DMA Clocks */ static struct clk clk_m2p0 = { .parent = &clk_h, @@ -191,6 +215,9 @@ static struct clk_lookup clocks[] = { INIT_CK("ep93xx-keypad", NULL, &clk_keypad), INIT_CK("ep93xx-fb", NULL, &clk_video), INIT_CK("ep93xx-spi.0", NULL, &clk_spi), + INIT_CK("ep93xx-i2s", "mclk", &clk_i2s_mclk), + INIT_CK("ep93xx-i2s", "sclk", &clk_i2s_sclk), + INIT_CK("ep93xx-i2s", "lrclk", &clk_i2s_lrclk), INIT_CK(NULL, "pwm_clk", &clk_pwm), INIT_CK(NULL, "m2p0", &clk_m2p0), INIT_CK(NULL, "m2p1", &clk_m2p1), @@ -401,6 +428,44 @@ static int set_div_rate(struct clk *clk, unsigned long rate) return 0; } +static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate) +{ + unsigned val = __raw_readl(clk->enable_reg); + + if (rate == clk_i2s_mclk.rate / 2) + ep93xx_syscon_swlocked_write(val & ~EP93XX_I2SCLKDIV_SDIV, + clk->enable_reg); + else if (rate == clk_i2s_mclk.rate / 4) + ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_SDIV, + clk->enable_reg); + else + return -EINVAL; + + clk_i2s_sclk.rate = rate; + return 0; +} + +static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate) +{ + unsigned val = __raw_readl(clk->enable_reg) & + ~EP93XX_I2SCLKDIV_LRDIV_MASK; + + if (rate == clk_i2s_sclk.rate / 32) + ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV32, + clk->enable_reg); + else if (rate == clk_i2s_sclk.rate / 64) + ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV64, + clk->enable_reg); + else if (rate == clk_i2s_sclk.rate / 128) + ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV128, + clk->enable_reg); + else + return -EINVAL; + + clk_i2s_lrclk.rate = rate; + return 0; +} + int clk_set_rate(struct clk *clk, unsigned long rate) { if (clk->set_rate) diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 8e37a045188c..4cb55d3902ff 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -758,6 +758,73 @@ void ep93xx_keypad_release_gpio(struct platform_device *pdev) } EXPORT_SYMBOL(ep93xx_keypad_release_gpio); +/************************************************************************* + * EP93xx I2S audio peripheral handling + *************************************************************************/ +static struct resource ep93xx_i2s_resource[] = { + { + .start = EP93XX_I2S_PHYS_BASE, + .end = EP93XX_I2S_PHYS_BASE + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_i2s_device = { + .name = "ep93xx-i2s", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), + .resource = ep93xx_i2s_resource, +}; + +void __init ep93xx_register_i2s(void) +{ + platform_device_register(&ep93xx_i2s_device); +} + +#define EP93XX_SYSCON_DEVCFG_I2S_MASK (EP93XX_SYSCON_DEVCFG_I2SONSSP | \ + EP93XX_SYSCON_DEVCFG_I2SONAC97) + +#define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \ + EP93XX_SYSCON_I2SCLKDIV_SPOL) + +int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config) +{ + unsigned val; + + /* Sanity check */ + if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK) + return -EINVAL; + if (i2s_config & ~EP93XX_I2SCLKDIV_MASK) + return -EINVAL; + + /* Must have only one of I2SONSSP/I2SONAC97 set */ + if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) == + (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97)) + return -EINVAL; + + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); + ep93xx_devcfg_set_bits(i2s_pins); + + /* + * This is potentially racy with the clock api for i2s_mclk, sclk and + * lrclk. Since the i2s driver is the only user of those clocks we + * rely on it to prevent parallel use of this function and the + * clock api for the i2s clocks. + */ + val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); + val &= ~EP93XX_I2SCLKDIV_MASK; + val |= i2s_config; + ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV); + + return 0; +} +EXPORT_SYMBOL(ep93xx_i2s_acquire); + +void ep93xx_i2s_release(void) +{ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); +} +EXPORT_SYMBOL(ep93xx_i2s_release); extern void ep93xx_gpio_init(void); diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index b1e096f0c2d2..c54b3e56ba63 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -93,6 +93,7 @@ /* APB peripherals */ #define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) +#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) #define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) #define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) @@ -194,6 +195,15 @@ #define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) #define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) #define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 +#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) +#define EP93XX_SYSCON_I2SCLKDIV_SENA (1<<31) +#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) +#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) +#define EP93XX_I2SCLKDIV_SDIV (1 << 16) +#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) +#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) +#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) +#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) #define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) #define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN (1<<31) #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index a6c09176334c..3330b36d79e6 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -58,6 +58,9 @@ void ep93xx_pwm_release_gpio(struct platform_device *pdev); void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); void ep93xx_keypad_release_gpio(struct platform_device *pdev); +void ep93xx_register_i2s(void); +int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config); +void ep93xx_i2s_release(void); void ep93xx_init_devices(void); extern struct sys_timer ep93xx_timer; diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 38deaee40397..a12c89301297 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -157,6 +157,7 @@ static void __init snappercl15_init_machine(void) ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data, ARRAY_SIZE(snappercl15_i2c_data)); ep93xx_register_fb(&snappercl15_fb_info); + ep93xx_register_i2s(); platform_device_register(&snappercl15_nand_device); } diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 9dd67c7b4459..1c82d4290dad 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -25,6 +25,7 @@ #include <asm/mach/time.h> #include <mach/kirkwood.h> #include <mach/bridge-regs.h> +#include <plat/audio.h> #include <plat/cache-feroceon-l2.h> #include <plat/ehci-orion.h> #include <plat/mvsdio.h> @@ -871,6 +872,42 @@ struct sys_timer kirkwood_timer = { .init = kirkwood_timer_init, }; +/***************************************************************************** + * Audio + ****************************************************************************/ +static struct resource kirkwood_i2s_resources[] = { + [0] = { + .start = AUDIO_PHYS_BASE, + .end = AUDIO_PHYS_BASE + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_KIRKWOOD_I2S, + .end = IRQ_KIRKWOOD_I2S, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct kirkwood_asoc_platform_data kirkwood_i2s_data = { + .dram = &kirkwood_mbus_dram_info, + .burst = 128, +}; + +static struct platform_device kirkwood_i2s_device = { + .name = "kirkwood-i2s", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_i2s_resources), + .resource = kirkwood_i2s_resources, + .dev = { + .platform_data = &kirkwood_i2s_data, + }, +}; + +void __init kirkwood_audio_init(void) +{ + kirkwood_clk_ctrl |= CGC_AUDIO; + platform_device_register(&kirkwood_i2s_device); +} /***************************************************************************** * General @@ -939,6 +976,7 @@ void __init kirkwood_init(void) kirkwood_spi_plat_data.tclk = kirkwood_tclk; kirkwood_uart0_data[0].uartclk = kirkwood_tclk; kirkwood_uart1_data[0].uartclk = kirkwood_tclk; + kirkwood_i2s_data.tclk = kirkwood_tclk; /* * Disable propagation of mbus errors to the CPU local bus, diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 5b2c1c18d641..95bb0a73adfb 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -17,6 +17,7 @@ struct mv_sata_platform_data; struct mvsdio_platform_data; struct mtd_partition; struct mtd_info; +struct kirkwood_asoc_platform_data; #define KW_PCIE0 (1 << 0) #define KW_PCIE1 (1 << 1) @@ -46,6 +47,7 @@ void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *)); +void kirkwood_audio_init(void); extern int kirkwood_tclk; extern struct sys_timer kirkwood_timer; diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index d141af4c2744..93fc2ec95e76 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -111,6 +111,9 @@ #define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) +#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0xA0000) +#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0xA0000) + /* * Supported devices and revisions. */ diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index fd64cd2b4e0a..fd06be618815 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -15,6 +15,7 @@ #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> +#include <linux/i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> @@ -60,6 +61,12 @@ static unsigned int openrd_mpp_config[] __initdata = { 0 }; +static struct i2c_board_info i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("cs42l51", 0x4a), + }, +}; + static void __init openrd_init(void) { /* @@ -86,6 +93,12 @@ static void __init openrd_init(void) kirkwood_sdio_init(&openrd_mvsdio_data); kirkwood_i2c_init(); + + if (machine_is_openrd_client()) { + i2c_register_board_info(0, i2c_board_info, + ARRAY_SIZE(i2c_board_info)); + kirkwood_audio_init(); + } } static int __init openrd_pci_init(void) diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index b18d7c28ab7a..3b02d3b944af 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -1,3 +1,7 @@ +if ARCH_OMAP1 + +menu "TI OMAP1 specific features" + comment "OMAP Core Type" depends on ARCH_OMAP1 @@ -224,6 +228,12 @@ config OMAP_ARM_120MHZ help Enable 120MHz clock for OMAP CPU. If unsure, say N. +config OMAP_ARM_96MHZ + bool "OMAP ARM 96 MHz CPU" + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) + help + Enable 96MHz clock for OMAP CPU. If unsure, say N. + config OMAP_ARM_60MHZ bool "OMAP ARM 60 MHz CPU" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) @@ -237,3 +247,6 @@ config OMAP_ARM_30MHZ help Enable 30MHz clock for OMAP CPU. If unsure, say N. +endmenu + +endif diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index ea231c7a550a..facfaeb1ae5c 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -23,6 +23,9 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) led-y := leds.o +usb-fs-$(CONFIG_USB) := usb.o +obj-y += $(usb-fs-m) $(usb-fs-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 0a9d61d2d229..41992ab71961 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -235,7 +235,7 @@ static void __init ams_delta_init(void) /* Clear latch2 (NAND, LCD, modem enable) */ ams_delta_latch2_write(~0, 0); - omap_usb_init(&ams_delta_usb_config); + omap1_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); #ifdef CONFIG_AMS_DELTA_FIQ diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 059bac60b35a..180ce79e5eac 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -292,6 +292,18 @@ static void __init omap_fsample_init(void) omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); + /* Mux pins for keypad */ + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); + platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = fsample_config; diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 7a65684d2a15..93b9ab8fc3be 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -72,12 +72,12 @@ static void __init omap_generic_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - omap_usb_init(&generic1510_usb_config); + omap1_usb_init(&generic1510_usb_config); } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (!cpu_is_omap1510()) { - omap_usb_init(&generic1610_usb_config); + omap1_usb_init(&generic1610_usb_config); } #endif diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 68b2beda8b99..d2cda58bcc48 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -292,15 +292,6 @@ static struct platform_device h2_kp_device = { #define H2_IRDA_FIRSEL_GPIO_PIN 17 -#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) -static int h2_transceiver_mode(struct device *dev, int state) -{ - /* SIR when low, else MIR/FIR when HIGH */ - gpio_set_value(H2_IRDA_FIRSEL_GPIO_PIN, !(state & IR_SIRMODE)); - return 0; -} -#endif - static struct omap_irda_config h2_irda_data = { .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, .rx_channel = OMAP_DMA_UART3_RX, @@ -437,14 +428,18 @@ static void __init h2_init(void) /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ - /* Irda */ -#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) - omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A); - if (gpio_request(H2_IRDA_FIRSEL_GPIO_PIN, "IRDA mode") < 0) - BUG(); - gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0); - h2_irda_data.transceiver_mode = h2_transceiver_mode; -#endif + /* Mux pins for keypad */ + omap_cfg_reg(F18_1610_KBC0); + omap_cfg_reg(D20_1610_KBC1); + omap_cfg_reg(D19_1610_KBC2); + omap_cfg_reg(E18_1610_KBC3); + omap_cfg_reg(C21_1610_KBC4); + omap_cfg_reg(G18_1610_KBR0); + omap_cfg_reg(F19_1610_KBR1); + omap_cfg_reg(H14_1610_KBR2); + omap_cfg_reg(E20_1610_KBR3); + omap_cfg_reg(E19_1610_KBR4); + omap_cfg_reg(N19_1610_KBR5); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; @@ -452,7 +447,7 @@ static void __init h2_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); - omap_usb_init(&h2_usb_config); + omap1_usb_init(&h2_usb_config); h2_mmc_init(); } diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 0b0825fe6751..c2ef4ff846c7 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -397,6 +397,19 @@ static void __init h3_init(void) /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ omap_cfg_reg(V2_1710_GPIO10); + /* Mux pins for keypad */ + omap_cfg_reg(F18_1610_KBC0); + omap_cfg_reg(D20_1610_KBC1); + omap_cfg_reg(D19_1610_KBC2); + omap_cfg_reg(E18_1610_KBC3); + omap_cfg_reg(C21_1610_KBC4); + omap_cfg_reg(G18_1610_KBR0); + omap_cfg_reg(F19_1610_KBR1); + omap_cfg_reg(H14_1610_KBR2); + omap_cfg_reg(E20_1610_KBR3); + omap_cfg_reg(E19_1610_KBR4); + omap_cfg_reg(N19_1610_KBR5); + platform_add_devices(devices, ARRAY_SIZE(devices)); spi_register_board_info(h3_spi_board_info, ARRAY_SIZE(h3_spi_board_info)); @@ -405,7 +418,7 @@ static void __init h3_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); - omap_usb_init(&h3_usb_config); + omap1_usb_init(&h3_usb_config); h3_mmc_init(); } diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index d70a4f0923f5..311899ff5ffc 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -287,7 +287,7 @@ static void __init htcherald_init(void) htcherald_disable_watchdog(); htcherald_usb_enable(); - omap_usb_init(&htcherald_usb_config); + omap1_usb_init(&htcherald_usb_config); } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 91064b37859a..3daf87ad2576 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -422,13 +422,13 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { - omap_usb_init(&innovator1510_usb_config); + omap1_usb_init(&innovator1510_usb_config); innovator_config[1].data = &innovator1510_lcd_config; } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { - omap_usb_init(&h2_usb_config); + omap1_usb_init(&h2_usb_config); innovator_config[1].data = &innovator1610_lcd_config; } #endif diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 8c28b10f3dae..51a4539aecf5 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -32,7 +32,6 @@ #include <plat/board.h> #include <plat/keypad.h> #include <plat/common.h> -#include <plat/dsp_common.h> #include <plat/hwa742.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> @@ -242,138 +241,6 @@ static inline void nokia770_mmc_init(void) } #endif -#if defined(CONFIG_OMAP_DSP) -/* - * audio power control - */ -#define HEADPHONE_GPIO 14 -#define AMPLIFIER_CTRL_GPIO 58 - -static struct clk *dspxor_ck; -static DEFINE_MUTEX(audio_pwr_lock); -/* - * audio_pwr_state - * +--+-------------------------+---------------------------------------+ - * |-1|down |power-up request -> 0 | - * +--+-------------------------+---------------------------------------+ - * | 0|up |power-down(1) request -> 1 | - * | | |power-down(2) request -> (ignore) | - * +--+-------------------------+---------------------------------------+ - * | 1|up, |power-up request -> 0 | - * | |received down(1) request |power-down(2) request -> -1 | - * +--+-------------------------+---------------------------------------+ - */ -static int audio_pwr_state = -1; - -static inline void aic23_power_up(void) -{ -} -static inline void aic23_power_down(void) -{ -} - -/* - * audio_pwr_up / down should be called under audio_pwr_lock - */ -static void nokia770_audio_pwr_up(void) -{ - clk_enable(dspxor_ck); - - /* Turn on codec */ - aic23_power_up(); - - if (gpio_get_value(HEADPHONE_GPIO)) - /* HP not connected, turn on amplifier */ - gpio_set_value(AMPLIFIER_CTRL_GPIO, 1); - else - /* HP connected, do not turn on amplifier */ - printk("HP connected\n"); -} - -static void codec_delayed_power_down(struct work_struct *work) -{ - mutex_lock(&audio_pwr_lock); - if (audio_pwr_state == -1) - aic23_power_down(); - clk_disable(dspxor_ck); - mutex_unlock(&audio_pwr_lock); -} - -static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down); - -static void nokia770_audio_pwr_down(void) -{ - /* Turn off amplifier */ - gpio_set_value(AMPLIFIER_CTRL_GPIO, 0); - - /* Turn off codec: schedule delayed work */ - schedule_delayed_work(&codec_power_down_work, HZ / 20); /* 50ms */ -} - -static int -nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage) -{ - mutex_lock(&audio_pwr_lock); - if (audio_pwr_state == -1) - nokia770_audio_pwr_up(); - /* force audio_pwr_state = 0, even if it was 1. */ - audio_pwr_state = 0; - mutex_unlock(&audio_pwr_lock); - return 0; -} - -static int -nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage) -{ - mutex_lock(&audio_pwr_lock); - switch (stage) { - case 1: - if (audio_pwr_state == 0) - audio_pwr_state = 1; - break; - case 2: - if (audio_pwr_state == 1) { - nokia770_audio_pwr_down(); - audio_pwr_state = -1; - } - break; - } - mutex_unlock(&audio_pwr_lock); - return 0; -} - -static struct dsp_kfunc_device nokia770_audio_device = { - .name = "audio", - .type = DSP_KFUNC_DEV_TYPE_AUDIO, - .enable = nokia770_audio_pwr_up_request, - .disable = nokia770_audio_pwr_down_request, -}; - -static __init int omap_dsp_init(void) -{ - int ret; - - dspxor_ck = clk_get(0, "dspxor_ck"); - if (IS_ERR(dspxor_ck)) { - printk(KERN_ERR "couldn't acquire dspxor_ck\n"); - return PTR_ERR(dspxor_ck); - } - - ret = dsp_kfunc_device_register(&nokia770_audio_device); - if (ret) { - printk(KERN_ERR - "KFUNC device registration faild: %s\n", - nokia770_audio_device.name); - goto out; - } - return 0; - out: - return ret; -} -#else -#define omap_dsp_init() do {} while (0) -#endif /* CONFIG_OMAP_DSP */ - static void __init omap_nokia770_init(void) { platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); @@ -382,11 +249,10 @@ static void __init omap_nokia770_init(void) omap_gpio_init(); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - omap_dsp_init(); hwa742_dev_init(); ads7846_dev_init(); mipid_dev_init(); - omap_usb_init(&nokia770_usb_config); + omap1_usb_init(&nokia770_usb_config); nokia770_mmc_init(); } diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e2a72af30890..679740cc1e90 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -560,7 +560,7 @@ static void __init osk_init(void) l |= (3 << 1); omap_writel(l, USB_TRANSCEIVER_CTRL); - omap_usb_init(&osk_usb_config); + omap1_usb_init(&osk_usb_config); /* irq for tps65010 chip */ /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */ diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 61a2321b9732..782bb257a85d 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -213,90 +213,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; -#ifdef CONFIG_APM -/* - * Values measured in 10 minute intervals averaged over 10 samples. - * May differ slightly from device to device but should be accurate - * enough to give basic idea of battery life left and trigger - * potential alerts. - */ -static const int palmte_battery_sample[] = { - 2194, 2157, 2138, 2120, - 2104, 2089, 2075, 2061, - 2048, 2038, 2026, 2016, - 2008, 1998, 1989, 1980, - 1970, 1958, 1945, 1928, - 1910, 1888, 1860, 1827, - 1791, 1751, 1709, 1656, -}; - -#define INTERVAL 10 -#define BATTERY_HIGH_TRESHOLD 66 -#define BATTERY_LOW_TRESHOLD 33 - -static void palmte_get_power_status(struct apm_power_info *info, int *battery) -{ - int charging, batt, hi, lo, mid; - - charging = !gpio_get_value(PALMTE_DC_GPIO); - batt = battery[0]; - if (charging) - batt -= 60; - - hi = ARRAY_SIZE(palmte_battery_sample); - lo = 0; - - info->battery_flag = 0; - info->units = APM_UNITS_MINS; - - if (batt > palmte_battery_sample[lo]) { - info->battery_life = 100; - info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample); - } else if (batt <= palmte_battery_sample[hi - 1]) { - info->battery_life = 0; - info->time = 0; - } else { - while (hi > lo + 1) { - mid = (hi + lo) >> 1; - if (batt <= palmte_battery_sample[mid]) - lo = mid; - else - hi = mid; - } - - mid = palmte_battery_sample[lo] - palmte_battery_sample[hi]; - hi = palmte_battery_sample[lo] - batt; - info->battery_life = 100 - (100 * lo + 100 * hi / mid) / - ARRAY_SIZE(palmte_battery_sample); - info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) - - lo) - INTERVAL * hi / mid; - } - - if (charging) { - info->ac_line_status = APM_AC_ONLINE; - info->battery_status = APM_BATTERY_STATUS_CHARGING; - info->battery_flag |= APM_BATTERY_FLAG_CHARGING; - } else { - info->ac_line_status = APM_AC_OFFLINE; - if (info->battery_life > BATTERY_HIGH_TRESHOLD) - info->battery_status = APM_BATTERY_STATUS_HIGH; - else if (info->battery_life > BATTERY_LOW_TRESHOLD) - info->battery_status = APM_BATTERY_STATUS_LOW; - else - info->battery_status = APM_BATTERY_STATUS_CRITICAL; - } - - if (info->battery_life > BATTERY_HIGH_TRESHOLD) - info->battery_flag |= APM_BATTERY_FLAG_HIGH; - else if (info->battery_life > BATTERY_LOW_TRESHOLD) - info->battery_flag |= APM_BATTERY_FLAG_LOW; - else - info->battery_flag |= APM_BATTERY_FLAG_CRITICAL; -} -#else -#define palmte_get_power_status NULL -#endif - static struct omap_board_config_kernel palmte_config[] __initdata = { { OMAP_TAG_LCD, &palmte_lcd_config }, }; @@ -359,7 +275,7 @@ static void __init omap_palmte_init(void) spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); palmte_misc_gpio_setup(); omap_serial_init(); - omap_usb_init(&palmte_usb_config); + omap1_usb_init(&palmte_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 21c01c6afcc1..0b35ef54a64f 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -307,7 +307,7 @@ static void __init omap_palmtt_init(void) spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); - omap_usb_init(&palmtt_usb_config); + omap1_usb_init(&palmtt_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index f32492451533..66362903b6e2 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -325,7 +325,7 @@ omap_palmz71_init(void) spi_register_board_info(palmz71_boardinfo, ARRAY_SIZE(palmz71_boardinfo)); - omap_usb_init(&palmz71_usb_config); + omap1_usb_init(&palmz71_usb_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 8b5ab1fcc405..34ab354758b0 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -260,6 +260,18 @@ static void __init omap_perseus2_init(void) omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); + /* Mux pins for keypad */ + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); + platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = perseus2_config; diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 995566b862bb..2eb148b8de93 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -392,7 +392,7 @@ static void __init omap_sx1_init(void) omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - omap_usb_init(&sx1_usb_config); + omap1_usb_init(&sx1_usb_config); sx1_mmc_init(); /* turn on USB power */ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 4c483dc1de5c..6b3cf14bc757 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -198,7 +198,7 @@ static void __init voiceblue_init(void) omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); - omap_usb_init(&voiceblue_usb_config); + omap1_usb_init(&voiceblue_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); /* There is a good chance board is going up, so enable power LED diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 6bbb1b8b8294..b8c7fb9d7921 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -11,7 +11,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/module.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/errno.h> @@ -34,9 +33,9 @@ __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; -/*------------------------------------------------------------------------- +/* * Omap1 specific clock functions - *-------------------------------------------------------------------------*/ + */ unsigned long omap1_uart_recalc(struct clk *clk) { @@ -523,7 +522,8 @@ const struct clkops clkops_dspck = { .disable = omap1_clk_disable_dsp_domain, }; -static int omap1_clk_enable_uart_functional(struct clk *clk) +/* XXX SYSC register handling does not belong in the clock framework */ +static int omap1_clk_enable_uart_functional_16xx(struct clk *clk) { int ret; struct uart_clk *uclk; @@ -539,7 +539,8 @@ static int omap1_clk_enable_uart_functional(struct clk *clk) return ret; } -static void omap1_clk_disable_uart_functional(struct clk *clk) +/* XXX SYSC register handling does not belong in the clock framework */ +static void omap1_clk_disable_uart_functional_16xx(struct clk *clk) { struct uart_clk *uclk; @@ -550,9 +551,10 @@ static void omap1_clk_disable_uart_functional(struct clk *clk) omap1_clk_disable_generic(clk); } -const struct clkops clkops_uart = { - .enable = omap1_clk_enable_uart_functional, - .disable = omap1_clk_disable_uart_functional, +/* XXX SYSC register handling does not belong in the clock framework */ +const struct clkops clkops_uart_16xx = { + .enable = omap1_clk_enable_uart_functional_16xx, + .disable = omap1_clk_disable_uart_functional_16xx, }; long omap1_clk_round_rate(struct clk *clk, unsigned long rate) @@ -572,9 +574,9 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate) return ret; } -/*------------------------------------------------------------------------- +/* * Omap1 clock reset and init functions - *-------------------------------------------------------------------------*/ + */ #ifdef CONFIG_OMAP_RESET_CLOCKS diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 75d0d7d90bff..eaf09efb91ca 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -107,7 +107,7 @@ extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; extern const struct clkops clkops_dspck; extern const struct clkops clkops_dummy; -extern const struct clkops clkops_uart; +extern const struct clkops clkops_uart_16xx; extern const struct clkops clkops_generic; #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index aa8558adbf1c..af54114b8f08 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -8,6 +8,10 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * To do: + * - Clocks that are only available on some chips should be marked with the + * chips that they are present on. */ #include <linux/kernel.h> @@ -23,9 +27,49 @@ #include "clock.h" -/*------------------------------------------------------------------------ +/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ +#define IDL_CLKOUT_ARM_SHIFT 12 +#define IDLTIM_ARM_SHIFT 9 +#define IDLAPI_ARM_SHIFT 8 +#define IDLIF_ARM_SHIFT 6 +#define IDLLB_ARM_SHIFT 4 /* undocumented? */ +#define OMAP1510_IDLLCD_ARM_SHIFT 3 /* undocumented? */ +#define IDLPER_ARM_SHIFT 2 +#define IDLXORP_ARM_SHIFT 1 +#define IDLWDT_ARM_SHIFT 0 + +/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */ +#define CONF_MOD_UART3_CLK_MODE_R 31 +#define CONF_MOD_UART2_CLK_MODE_R 30 +#define CONF_MOD_UART1_CLK_MODE_R 29 +#define CONF_MOD_MMC_SD_CLK_REQ_R 23 +#define CONF_MOD_MCBSP3_AUXON 20 + +/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */ +#define CONF_MOD_SOSSI_CLK_EN_R 16 + +/* Some OTG_SYSCON_2-specific bit fields */ +#define OTG_SYSCON_2_UHOST_EN_SHIFT 8 + +/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */ +#define SOFT_MMC2_DPLL_REQ_SHIFT 13 +#define SOFT_MMC_DPLL_REQ_SHIFT 12 +#define SOFT_UART3_DPLL_REQ_SHIFT 11 +#define SOFT_UART2_DPLL_REQ_SHIFT 10 +#define SOFT_UART1_DPLL_REQ_SHIFT 9 +#define SOFT_USB_OTG_DPLL_REQ_SHIFT 8 +#define SOFT_CAM_DPLL_REQ_SHIFT 7 +#define SOFT_COM_MCKO_REQ_SHIFT 6 +#define SOFT_PERIPH_REQ_SHIFT 5 /* sys_ck gate for UART2 ? */ +#define USB_REQ_EN_SHIFT 4 +#define SOFT_USB_REQ_SHIFT 3 /* sys_ck gate for USB host? */ +#define SOFT_SDW_REQ_SHIFT 2 /* sys_ck gate for Bluetooth? */ +#define SOFT_COM_REQ_SHIFT 1 /* sys_ck gate for com proc? */ +#define SOFT_DPLL_REQ_SHIFT 0 + +/* * Omap1 clocks - *-------------------------------------------------------------------------*/ + */ static struct clk ck_ref = { .name = "ck_ref", @@ -54,7 +98,7 @@ static struct arm_idlect1_clk ck_dpll1out = { .enable_bit = EN_CKOUT_ARM, .recalc = &followparent_recalc, }, - .idlect_shift = 12, + .idlect_shift = IDL_CLKOUT_ARM_SHIFT, }; static struct clk sossi_ck = { @@ -63,7 +107,7 @@ static struct clk sossi_ck = { .parent = &ck_dpll1out.clk, .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), - .enable_bit = 16, + .enable_bit = CONF_MOD_SOSSI_CLK_EN_R, .recalc = &omap1_sossi_recalc, .set_rate = &omap1_set_sossi_rate, }; @@ -91,7 +135,7 @@ static struct arm_idlect1_clk armper_ck = { .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }, - .idlect_shift = 2, + .idlect_shift = IDLPER_ARM_SHIFT, }; /* @@ -118,7 +162,7 @@ static struct arm_idlect1_clk armxor_ck = { .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, }, - .idlect_shift = 1, + .idlect_shift = IDLXORP_ARM_SHIFT, }; static struct arm_idlect1_clk armtim_ck = { @@ -131,7 +175,7 @@ static struct arm_idlect1_clk armtim_ck = { .enable_bit = EN_TIMCK, .recalc = &followparent_recalc, }, - .idlect_shift = 9, + .idlect_shift = IDLTIM_ARM_SHIFT, }; static struct arm_idlect1_clk armwdt_ck = { @@ -145,7 +189,7 @@ static struct arm_idlect1_clk armwdt_ck = { .fixed_div = 14, .recalc = &omap_fixed_divisor_recalc, }, - .idlect_shift = 0, + .idlect_shift = IDLWDT_ARM_SHIFT, }; static struct clk arminth_ck16xx = { @@ -212,7 +256,6 @@ static struct clk dsptim_ck = { .recalc = &followparent_recalc, }; -/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ static struct arm_idlect1_clk tc_ck = { .clk = { .name = "tc_ck", @@ -224,7 +267,7 @@ static struct arm_idlect1_clk tc_ck = { .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }, - .idlect_shift = 6, + .idlect_shift = IDLIF_ARM_SHIFT, }; static struct clk arminth_ck1510 = { @@ -304,7 +347,7 @@ static struct arm_idlect1_clk api_ck = { .enable_bit = EN_APICK, .recalc = &followparent_recalc, }, - .idlect_shift = 8, + .idlect_shift = IDLAPI_ARM_SHIFT, }; static struct arm_idlect1_clk lb_ck = { @@ -317,7 +360,7 @@ static struct arm_idlect1_clk lb_ck = { .enable_bit = EN_LBCK, .recalc = &followparent_recalc, }, - .idlect_shift = 4, + .idlect_shift = IDLLB_ARM_SHIFT, }; static struct clk rhea1_ck = { @@ -359,9 +402,15 @@ static struct arm_idlect1_clk lcd_ck_1510 = { .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }, - .idlect_shift = 3, + .idlect_shift = OMAP1510_IDLLCD_ARM_SHIFT, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ static struct clk uart1_1510 = { .name = "uart1_ck", .ops = &clkops_null, @@ -370,25 +419,37 @@ static struct clk uart1_1510 = { .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .enable_bit = CONF_MOD_UART1_CLK_MODE_R, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX SYSC register handling does not belong in the clock framework + */ static struct uart_clk uart1_16xx = { .clk = { .name = "uart1_ck", - .ops = &clkops_uart, + .ops = &clkops_uart_16xx, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, + .enable_bit = CONF_MOD_UART1_CLK_MODE_R, }, .sysc_addr = 0xfffb0054, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ static struct clk uart2_ck = { .name = "uart2_ck", .ops = &clkops_null, @@ -397,11 +458,17 @@ static struct clk uart2_ck = { .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .enable_bit = CONF_MOD_UART2_CLK_MODE_R, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ static struct clk uart3_1510 = { .name = "uart3_ck", .ops = &clkops_null, @@ -410,21 +477,27 @@ static struct clk uart3_1510 = { .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .enable_bit = CONF_MOD_UART3_CLK_MODE_R, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX SYSC register handling does not belong in the clock framework + */ static struct uart_clk uart3_16xx = { .clk = { .name = "uart3_ck", - .ops = &clkops_uart, + .ops = &clkops_uart_16xx, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, + .enable_bit = CONF_MOD_UART3_CLK_MODE_R, }, .sysc_addr = 0xfffb9854, }; @@ -457,7 +530,7 @@ static struct clk usb_hhc_ck16xx = { /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ .flags = ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ - .enable_bit = 8 /* UHOST_EN */, + .enable_bit = OTG_SYSCON_2_UHOST_EN_SHIFT }; static struct clk usb_dc_ck = { @@ -466,7 +539,7 @@ static struct clk usb_dc_ck = { /* Direct from ULPD, no parent */ .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 4, + .enable_bit = USB_REQ_EN_SHIFT, }; static struct clk usb_dc_ck7xx = { @@ -475,7 +548,25 @@ static struct clk usb_dc_ck7xx = { /* Direct from ULPD, no parent */ .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 8, + .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT, +}; + +static struct clk uart1_7xx = { + .name = "uart1_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 12000000, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 9, +}; + +static struct clk uart2_7xx = { + .name = "uart2_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 12000000, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 11, }; static struct clk mclk_1510 = { @@ -484,7 +575,7 @@ static struct clk mclk_1510 = { /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 6, + .enable_bit = SOFT_COM_MCKO_REQ_SHIFT, }; static struct clk mclk_16xx = { @@ -524,9 +615,13 @@ static struct clk mmc1_ck = { .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 23, + .enable_bit = CONF_MOD_MMC_SD_CLK_REQ_R, }; +/* + * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as + * CONF_MOD_MCBSP3_AUXON ?? + */ static struct clk mmc2_ck = { .name = "mmc2_ck", .ops = &clkops_generic, @@ -546,7 +641,7 @@ static struct clk mmc3_ck = { .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 12, + .enable_bit = SOFT_MMC_DPLL_REQ_SHIFT, }; static struct clk virtual_ck_mpu = { @@ -620,7 +715,9 @@ static struct omap_clk omap_clks[] = { /* ULPD clocks */ CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), + CLK(NULL, "uart1_ck", &uart1_7xx, CK_7XX), CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart2_ck", &uart2_7xx, CK_7XX), CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 379100c17639..aa0725608fb1 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -63,44 +63,7 @@ static void omap_init_rtc(void) static inline void omap_init_rtc(void) {} #endif -#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) - -#if defined(CONFIG_ARCH_OMAP15XX) -# define OMAP1_MBOX_SIZE 0x23 -# define INT_DSP_MAILBOX1 INT_1510_DSP_MAILBOX1 -#elif defined(CONFIG_ARCH_OMAP16XX) -# define OMAP1_MBOX_SIZE 0x2f -# define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1 -#endif - -#define OMAP1_MBOX_BASE OMAP16XX_MAILBOX_BASE - -static struct resource mbox_resources[] = { - { - .start = OMAP1_MBOX_BASE, - .end = OMAP1_MBOX_BASE + OMAP1_MBOX_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_DSP_MAILBOX1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mbox_device = { - .name = "omap1-mailbox", - .id = -1, - .num_resources = ARRAY_SIZE(mbox_resources), - .resource = mbox_resources, -}; - -static inline void omap_init_mbox(void) -{ - platform_device_register(&mbox_device); -} -#else static inline void omap_init_mbox(void) { } -#endif /*-------------------------------------------------------------------------*/ @@ -230,42 +193,7 @@ static inline void omap_init_spi100k(void) /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_OMAP_STI) - -#define OMAP1_STI_BASE 0xfffea000 -#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400) - -static struct resource sti_resources[] = { - { - .start = OMAP1_STI_BASE, - .end = OMAP1_STI_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP1_STI_CHANNEL_BASE, - .end = OMAP1_STI_CHANNEL_BASE + SZ_1K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_1610_STI, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device sti_device = { - .name = "sti", - .id = -1, - .num_resources = ARRAY_SIZE(sti_resources), - .resource = sti_resources, -}; - -static inline void omap_init_sti(void) -{ - platform_device_register(&sti_device); -} -#else static inline void omap_init_sti(void) {} -#endif /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index e8a8cf36b7f0..671408eb4ab4 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -33,7 +33,7 @@ omap_uart_virt: .word 0x0 /* Use omap_uart_phys/virt if already configured */ 9: mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - ldreq \rx, =omap_uart_phys @ physical base address + ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address ldrne \rx, =omap_uart_virt @ virtual base ldr \rx, [\rx, #0] cmp \rx, #0 @ is port configured? @@ -68,11 +68,15 @@ omap_uart_virt: .word 0x0 /* Store both phys and virt address for the uart */ 98: add \rx, \rx, #0xff000000 @ phys base - ldr \tmp, =omap_uart_phys + mrc p15, 0, \tmp, c1, c0 + tst \tmp, #1 @ MMU enabled? + ldreq \tmp, =__virt_to_phys(omap_uart_phys) + ldrne \tmp, =omap_uart_phys str \rx, [\tmp, #0] sub \rx, \rx, #0xff000000 @ phys base add \rx, \rx, #0xfe000000 @ virt base - ldr \tmp, =omap_uart_virt + ldreq \tmp, =__virt_to_phys(omap_uart_virt) + ldrne \tmp, =omap_uart_virt str \rx, [\tmp, #0] b 9b 99: diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 4f5b3da3d559..1a85a421007f 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -1,5 +1,5 @@ /* - * Mailbox reservation modules for DSP + * Mailbox reservation modules for OMAP1 * * Copyright (C) 2006-2009 Nokia Corporation * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> @@ -9,13 +9,10 @@ * for more details. */ -#include <linux/kernel.h> -#include <linux/resource.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> #include <plat/mailbox.h> -#include <mach/irqs.h> #define MAILBOX_ARM2DSP1 0x00 #define MAILBOX_ARM2DSP1b 0x04 @@ -83,7 +80,7 @@ static int omap1_mbox_fifo_full(struct omap_mbox *mbox) struct omap_mbox1_fifo *fifo = &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; - return (mbox_read_reg(fifo->flag)); + return mbox_read_reg(fifo->flag); } /* irq */ @@ -141,47 +138,37 @@ struct omap_mbox mbox_dsp_info = { .ops = &omap1_mbox_ops, .priv = &omap1_mbox_dsp_priv, }; -EXPORT_SYMBOL(mbox_dsp_info); + +struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; static int __devinit omap1_mbox_probe(struct platform_device *pdev) { - struct resource *res; + struct resource *mem; + int ret; + int i; + struct omap_mbox **list; - if (pdev->num_resources != 2) { - dev_err(&pdev->dev, "invalid number of resources: %d\n", - pdev->num_resources); - return -ENODEV; - } + list = omap1_mboxes; + list[0]->irq = platform_get_irq_byname(pdev, "dsp"); - /* MBOX base */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!res)) { - dev_err(&pdev->dev, "invalid mem resource\n"); - return -ENODEV; - } + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mbox_base = ioremap(mem->start, resource_size(mem)); + if (!mbox_base) + return -ENOMEM; - mbox_base = ioremap(res->start, resource_size(res)); - if (!mbox_base) { - dev_err(&pdev->dev, "ioremap failed\n"); - return -ENODEV; - } - - /* DSP IRQ */ - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (unlikely(!res)) { - dev_err(&pdev->dev, "invalid irq resource\n"); + ret = omap_mbox_register(&pdev->dev, list); + if (ret) { iounmap(mbox_base); - return -ENODEV; + return ret; } - mbox_dsp_info.irq = res->start; - return omap_mbox_register(&pdev->dev, &mbox_dsp_info); + return 0; } static int __devexit omap1_mbox_remove(struct platform_device *pdev) { - omap_mbox_unregister(&mbox_dsp_info); - + omap_mbox_unregister(); + iounmap(mbox_base); return 0; } @@ -189,7 +176,7 @@ static struct platform_driver omap1_mbox_driver = { .probe = omap1_mbox_probe, .remove = __devexit_p(omap1_mbox_remove), .driver = { - .name = "omap1-mailbox", + .name = "omap-mailbox", }, }; diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index e9bdff192f82..b3a796a6da03 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -23,7 +23,6 @@ #include <plat/mux.h> #include <plat/cpu.h> #include <plat/mcbsp.h> -#include <plat/dsp_common.h> #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) @@ -46,7 +45,6 @@ static void omap1_mcbsp_request(unsigned int id) clk_enable(api_clk); clk_enable(dsp_clk); - omap_dsp_request_mem(); /* * DSP external peripheral reset * FIXME: This should be moved to dsp code @@ -62,7 +60,6 @@ static void omap1_mcbsp_free(unsigned int id) { if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (--dsp_use == 0) { - omap_dsp_release_mem(); if (!IS_ERR(api_clk)) { clk_disable(api_clk); clk_put(api_clk); diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 84341377232d..7835add00344 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -70,6 +70,10 @@ MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0) MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0) MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0) MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0) + +/* UART pins */ +MUX_CFG_7XX("UART_7XX_1", 3, 21, 0, 20, 0, 0) +MUX_CFG_7XX("UART_7XX_2", 8, 1, 6, 0, 0, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else @@ -440,7 +444,7 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) } #endif -#ifdef CONFIG_OMAP_MUX_ERRORS +#ifdef CONFIG_OMAP_MUX_WARNINGS return warn ? -ETXTBSY : 0; #else return 0; diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 349de90194e3..b78d0749f13d 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -122,6 +122,13 @@ void __init omap_serial_init(void) for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) { + /* Don't look at UARTs higher than 2 for omap7xx */ + if (cpu_is_omap7xx() && i > 1) { + serial_platform_data[i].membase = NULL; + serial_platform_data[i].mapbase = 0; + continue; + } + /* Static mapping, never released */ serial_platform_data[i].membase = ioremap(serial_platform_data[i].mapbase, SZ_2K); diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c new file mode 100644 index 000000000000..19de03b074e3 --- /dev/null +++ b/arch/arm/mach-omap1/usb.c @@ -0,0 +1,530 @@ +/* + * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx + * + * Copyright (C) 2004 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <asm/irq.h> + +#include <plat/mux.h> +#include <plat/usb.h> + +/* These routines should handle the standard chip-specific modes + * for usb0/1/2 ports, covering basic mux and transceiver setup. + * + * Some board-*.c files will need to set up additional mux options, + * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. + */ + +/* TESTED ON: + * - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables + * - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables + * - 5912 OSK UDC, with *nonstandard* A-to-A cable + * - 1510 Innovator UDC with bundled usb0 cable + * - 1510 Innovator OHCI with bundled usb1/usb2 cable + * - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS + * - 1710 custom development board using alternate pin group + * - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables + */ + +#define INT_USB_IRQ_GEN IH2_BASE + 20 +#define INT_USB_IRQ_NISO IH2_BASE + 30 +#define INT_USB_IRQ_ISO IH2_BASE + 29 +#define INT_USB_IRQ_HGEN INT_USB_HHC_1 +#define INT_USB_IRQ_OTG IH2_BASE + 8 + +#ifdef CONFIG_USB_GADGET_OMAP + +static struct resource udc_resources[] = { + /* order is significant! */ + { /* registers */ + .start = UDC_BASE, + .end = UDC_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { /* general IRQ */ + .start = INT_USB_IRQ_GEN, + .flags = IORESOURCE_IRQ, + }, { /* PIO IRQ */ + .start = INT_USB_IRQ_NISO, + .flags = IORESOURCE_IRQ, + }, { /* SOF IRQ */ + .start = INT_USB_IRQ_ISO, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 udc_dmamask = ~(u32)0; + +static struct platform_device udc_device = { + .name = "omap_udc", + .id = -1, + .dev = { + .dma_mask = &udc_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(udc_resources), + .resource = udc_resources, +}; + +static inline void udc_device_init(struct omap_usb_config *pdata) +{ + /* IRQ numbers for omap7xx */ + if(cpu_is_omap7xx()) { + udc_resources[1].start = INT_7XX_USB_GENI; + udc_resources[2].start = INT_7XX_USB_NON_ISO; + udc_resources[3].start = INT_7XX_USB_ISO; + } + pdata->udc_device = &udc_device; +} + +#else + +static inline void udc_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = ~(u32)0; + +static struct resource ohci_resources[] = { + { + .start = OMAP_OHCI_BASE, + .end = OMAP_OHCI_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_USB_IRQ_HGEN, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ohci_device = { + .name = "ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, +}; + +static inline void ohci_device_init(struct omap_usb_config *pdata) +{ + if (cpu_is_omap7xx()) + ohci_resources[1].start = INT_7XX_USB_HHC_1; + pdata->ohci_device = &ohci_device; +} + +#else + +static inline void ohci_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) + +static struct resource otg_resources[] = { + /* order is significant! */ + { + .start = OTG_BASE, + .end = OTG_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = INT_USB_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device otg_device = { + .name = "omap_otg", + .id = -1, + .num_resources = ARRAY_SIZE(otg_resources), + .resource = otg_resources, +}; + +static inline void otg_device_init(struct omap_usb_config *pdata) +{ + if (cpu_is_omap7xx()) + otg_resources[1].start = INT_7XX_USB_OTG; + pdata->otg_device = &otg_device; +} + +#else + +static inline void otg_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) +{ + u32 syscon1 = 0; + + if (nwires == 0) { + if (!cpu_is_omap15xx()) { + u32 l; + + /* pulldown D+/D- */ + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~(3 << 1); + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + return 0; + } + + if (is_device) { + if (cpu_is_omap7xx()) { + omap_cfg_reg(AA17_7XX_USB_DM); + omap_cfg_reg(W16_7XX_USB_PU_EN); + omap_cfg_reg(W17_7XX_USB_VBUSI); + omap_cfg_reg(W18_7XX_USB_DMCK_OUT); + omap_cfg_reg(W19_7XX_USB_DCRST); + } else + omap_cfg_reg(W4_USB_PUEN); + } + + if (nwires == 2) { + u32 l; + + // omap_cfg_reg(P9_USB_DP); + // omap_cfg_reg(R8_USB_DM); + + if (cpu_is_omap15xx()) { + /* This works on 1510-Innovator */ + return 0; + } + + /* NOTES: + * - peripheral should configure VBUS detection! + * - only peripherals may use the internal D+/D- pulldowns + * - OTG support on this port not yet written + */ + + /* Don't do this for omap7xx -- it causes USB to not work correctly */ + if (!cpu_is_omap7xx()) { + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~(7 << 4); + if (!is_device) + l |= (3 << 1); + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + + return 3 << 16; + } + + /* alternate pin config, external transceiver */ + if (cpu_is_omap15xx()) { + printk(KERN_ERR "no usb0 alt pin config on 15xx\n"); + return 0; + } + + omap_cfg_reg(V6_USB0_TXD); + omap_cfg_reg(W9_USB0_TXEN); + omap_cfg_reg(W5_USB0_SE0); + if (nwires != 3) + omap_cfg_reg(Y5_USB0_RCV); + + /* NOTE: SPEED and SUSP aren't configured here. OTG hosts + * may be able to use I2C requests to set those bits along + * with VBUS switching and overcurrent detection. + */ + + if (nwires != 6) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + + switch (nwires) { + case 3: + syscon1 = 2; + break; + case 4: + syscon1 = 1; + break; + case 6: + syscon1 = 3; + { + u32 l; + + omap_cfg_reg(AA9_USB0_VP); + omap_cfg_reg(R9_USB0_VM); + l = omap_readl(USB_TRANSCEIVER_CTRL); + l |= CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + break; + default: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 0, nwires); + } + + return syscon1 << 16; +} + +u32 __init omap1_usb1_init(unsigned nwires) +{ + u32 syscon1 = 0; + + if (!cpu_is_omap15xx() && nwires != 6) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~CONF_USB1_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + if (nwires == 0) + return 0; + + /* external transceiver */ + omap_cfg_reg(USB1_TXD); + omap_cfg_reg(USB1_TXEN); + if (nwires != 3) + omap_cfg_reg(USB1_RCV); + + if (cpu_is_omap15xx()) { + omap_cfg_reg(USB1_SEO); + omap_cfg_reg(USB1_SPEED); + // SUSP + } else if (cpu_is_omap1610() || cpu_is_omap5912()) { + omap_cfg_reg(W13_1610_USB1_SE0); + omap_cfg_reg(R13_1610_USB1_SPEED); + // SUSP + } else if (cpu_is_omap1710()) { + omap_cfg_reg(R13_1710_USB1_SE0); + // SUSP + } else { + pr_debug("usb%d cpu unrecognized\n", 1); + return 0; + } + + switch (nwires) { + case 2: + goto bad; + case 3: + syscon1 = 2; + break; + case 4: + syscon1 = 1; + break; + case 6: + syscon1 = 3; + omap_cfg_reg(USB1_VP); + omap_cfg_reg(USB1_VM); + if (!cpu_is_omap15xx()) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l |= CONF_USB1_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + break; + default: +bad: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 1, nwires); + } + + return syscon1 << 20; +} + +u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +{ + u32 syscon1 = 0; + + /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ + if (alt_pingroup || nwires == 0) + return 0; + + if (!cpu_is_omap15xx() && nwires != 6) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + + /* external transceiver */ + if (cpu_is_omap15xx()) { + omap_cfg_reg(USB2_TXD); + omap_cfg_reg(USB2_TXEN); + omap_cfg_reg(USB2_SEO); + if (nwires != 3) + omap_cfg_reg(USB2_RCV); + /* there is no USB2_SPEED */ + } else if (cpu_is_omap16xx()) { + omap_cfg_reg(V6_USB2_TXD); + omap_cfg_reg(W9_USB2_TXEN); + omap_cfg_reg(W5_USB2_SE0); + if (nwires != 3) + omap_cfg_reg(Y5_USB2_RCV); + // FIXME omap_cfg_reg(USB2_SPEED); + } else { + pr_debug("usb%d cpu unrecognized\n", 1); + return 0; + } + + // omap_cfg_reg(USB2_SUSP); + + switch (nwires) { + case 2: + goto bad; + case 3: + syscon1 = 2; + break; + case 4: + syscon1 = 1; + break; + case 5: + goto bad; + case 6: + syscon1 = 3; + if (cpu_is_omap15xx()) { + omap_cfg_reg(USB2_VP); + omap_cfg_reg(USB2_VM); + } else { + u32 l; + + omap_cfg_reg(AA9_USB2_VP); + omap_cfg_reg(R9_USB2_VM); + l = omap_readl(USB_TRANSCEIVER_CTRL); + l |= CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + break; + default: +bad: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 2, nwires); + } + + return syscon1 << 24; +} + +#ifdef CONFIG_ARCH_OMAP15XX + +/* ULPD_DPLL_CTRL */ +#define DPLL_IOB (1 << 13) +#define DPLL_PLL_ENABLE (1 << 4) +#define DPLL_LOCK (1 << 0) + +/* ULPD_APLL_CTRL */ +#define APLL_NDPLL_SWITCH (1 << 0) + +static void __init omap_1510_usb_init(struct omap_usb_config *config) +{ + unsigned int val; + u16 w; + + config->usb0_init(config->pins[0], is_usb0_device(config)); + config->usb1_init(config->pins[1]); + config->usb2_init(config->pins[2], 0); + + val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1); + val |= (config->hmc_mode << 1); + omap_writel(val, MOD_CONF_CTRL_0); + + printk("USB: hmc %d", config->hmc_mode); + if (config->pins[0]) + printk(", usb0 %d wires%s", config->pins[0], + is_usb0_device(config) ? " (dev)" : ""); + if (config->pins[1]) + printk(", usb1 %d wires", config->pins[1]); + if (config->pins[2]) + printk(", usb2 %d wires", config->pins[2]); + printk("\n"); + + /* use DPLL for 48 MHz function clock */ + pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL), + omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ)); + + w = omap_readw(ULPD_APLL_CTRL); + w &= ~APLL_NDPLL_SWITCH; + omap_writew(w, ULPD_APLL_CTRL); + + w = omap_readw(ULPD_DPLL_CTRL); + w |= DPLL_IOB | DPLL_PLL_ENABLE; + omap_writew(w, ULPD_DPLL_CTRL); + + w = omap_readw(ULPD_SOFT_REQ); + w |= SOFT_UDC_REQ | SOFT_DPLL_REQ; + omap_writew(w, ULPD_SOFT_REQ); + + while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) + cpu_relax(); + +#ifdef CONFIG_USB_GADGET_OMAP + if (config->register_dev) { + int status; + + udc_device.dev.platform_data = config; + status = platform_device_register(&udc_device); + if (status) + pr_debug("can't register UDC device, %d\n", status); + /* udc driver gates 48MHz by D+ pullup */ + } +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + if (config->register_host) { + int status; + + ohci_device.dev.platform_data = config; + status = platform_device_register(&ohci_device); + if (status) + pr_debug("can't register OHCI device, %d\n", status); + /* hcd explicitly gates 48MHz */ + } +#endif +} + +#else +static inline void omap_1510_usb_init(struct omap_usb_config *config) {} +#endif + +void __init omap1_usb_init(struct omap_usb_config *pdata) +{ + pdata->usb0_init = omap1_usb0_init; + pdata->usb1_init = omap1_usb1_init; + pdata->usb2_init = omap1_usb2_init; + udc_device_init(pdata); + ohci_device_init(pdata); + otg_device_init(pdata); + + if (cpu_is_omap7xx() || cpu_is_omap16xx()) + omap_otg_init(pdata); + else if (cpu_is_omap15xx()) + omap_1510_usb_init(pdata); + else + printk(KERN_ERR "USB: No init for your chip yet\n"); +} diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b31b6f123122..b48bacf0a7aa 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -1,22 +1,77 @@ +if ARCH_OMAP2PLUS + +menu "TI OMAP2/3/4 Specific Features" + +config ARCH_OMAP2PLUS_TYPICAL + bool "Typical OMAP configuration" + default y + select AEABI + select REGULATOR + select PM + select PM_RUNTIME + select VFP + select NEON if ARCH_OMAP3 || ARCH_OMAP4 + select SERIAL_8250 + select SERIAL_CORE_CONSOLE + select SERIAL_8250_CONSOLE + select I2C + select I2C_OMAP + select MFD + select MENELAUS if ARCH_OMAP2 + select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 + select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 + help + Compile a kernel suitable for booting most boards + +config ARCH_OMAP2 + bool "TI OMAP2" + depends on ARCH_OMAP2PLUS + default y + select CPU_V6 + +config ARCH_OMAP3 + bool "TI OMAP3" + depends on ARCH_OMAP2PLUS + default y + select CPU_V7 + select USB_ARCH_HAS_EHCI + select ARM_L1_CACHE_SHIFT_6 + +config ARCH_OMAP4 + bool "TI OMAP4" + default y + depends on ARCH_OMAP2PLUS + select CPU_V7 + select ARM_GIC + comment "OMAP Core Type" depends on ARCH_OMAP2 config ARCH_OMAP2420 bool "OMAP2420 support" depends on ARCH_OMAP2 + default y select OMAP_DM_TIMER select ARCH_OMAP_OTG config ARCH_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP2 + default y select ARCH_OMAP_OTG config ARCH_OMAP3430 bool "OMAP3430 support" depends on ARCH_OMAP3 + default y select ARCH_OMAP_OTG +config OMAP_PACKAGE_ZAF + bool + +config OMAP_PACKAGE_ZAC + bool + config OMAP_PACKAGE_CBC bool @@ -35,6 +90,7 @@ comment "OMAP Board Type" config MACH_OMAP_GENERIC bool "Generic OMAP board" depends on ARCH_OMAP2 + default y config MACH_OMAP2_TUSB6010 bool @@ -44,60 +100,75 @@ config MACH_OMAP2_TUSB6010 config MACH_OMAP_H4 bool "OMAP 2420 H4 board" depends on ARCH_OMAP2 + default y + select OMAP_PACKAGE_ZAF select OMAP_DEBUG_DEVICES config MACH_OMAP_APOLLON bool "OMAP 2420 Apollon board" depends on ARCH_OMAP2 + default y + select OMAP_PACKAGE_ZAC config MACH_OMAP_2430SDP bool "OMAP 2430 SDP board" depends on ARCH_OMAP2 + default y + select OMAP_PACKAGE_ZAC config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBB config MACH_DEVKIT8000 bool "DEVKIT8000 board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CUS select OMAP_MUX config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBB config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBB config MACH_OMAP3EVM bool "OMAP 3530 EVM board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBB config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBB config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBB config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 + default y select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBB config MACH_NOKIA_N800 @@ -112,6 +183,8 @@ config MACH_NOKIA_N810_WIMAX config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on ARCH_OMAP2420 + default y + select OMAP_PACKAGE_ZAC select MACH_NOKIA_N800 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX @@ -119,42 +192,55 @@ config MACH_NOKIA_N8X0 config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM2 bool "OMAP3 Zoom2 board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBP config MACH_CM_T35 bool "CompuLab CM-T35 module" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CUS select OMAP_MUX config MACH_IGEP0020 bool "IGEP v2 board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBB config MACH_SBC3530 bool "OMAP3 SBC STALKER board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CUS select OMAP_MUX config MACH_OMAP_3630SDP bool "OMAP3630 SDP board" depends on ARCH_OMAP3 + default y select OMAP_PACKAGE_CBP config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" + default y + depends on ARCH_OMAP4 + +config MACH_OMAP4_PANDA + bool "OMAP4 Panda Board" + default y depends on ARCH_OMAP4 config OMAP3_EMU @@ -176,3 +262,6 @@ config OMAP3_SDRC_AC_TIMING wish to say no. Selecting yes without understanding what is going on could result in system crashes; +endmenu + +endif diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ea52b034e963..63b2d8859c3c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o +obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o omap-2-3-common = irq.o sdrc.o hwmod-common = omap_hwmod.o \ @@ -15,13 +15,14 @@ clock-common = clock.o clock_common_data.o \ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common) -obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) +obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common) obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o # SMP support ONLY available for OMAP4 obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o +obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a @@ -36,6 +37,8 @@ AFLAGS_sram243x.o :=-Wa,-march=armv6 AFLAGS_sram34xx.o :=-Wa,-march=armv7-a # Pin multiplexing +obj-$(CONFIG_ARCH_OMAP2420) += mux2420.o +obj-$(CONFIG_ARCH_OMAP2430) += mux2430.o obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o # SMS/SDRC @@ -47,6 +50,7 @@ ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o +obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 @@ -89,7 +93,10 @@ obj-$(CONFIG_OMAP3_EMU) += emu.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o -obj-$(CONFIG_OMAP_IOMMU) := iommu2.o omap-iommu.o +obj-$(CONFIG_OMAP_IOMMU) += iommu2.o + +iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o +obj-y += $(iommu-m) $(iommu-y) i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) @@ -105,6 +112,7 @@ obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ + board-flash.o \ hsmmc.o obj-$(CONFIG_MACH_OVERO) += board-overo.o \ hsmmc.o @@ -114,7 +122,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \ hsmmc.o \ - board-sdp-flash.o + board-flash.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-sdram.o \ @@ -123,14 +131,17 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ board-zoom-peripherals.o \ + board-flash.o \ hsmmc.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \ board-zoom-peripherals.o \ + board-flash.o \ hsmmc.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ board-zoom-peripherals.o \ + board-flash.o \ hsmmc.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ hsmmc.o @@ -140,12 +151,16 @@ obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \ hsmmc.o +obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \ + hsmmc.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \ hsmmc.o # Platform specific device init code +usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o +obj-y += $(usbfs-m) $(usbfs-y) obj-y += usb-musb.o obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o obj-y += usb-ehci.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 42f49f785c93..8538e4131d27 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -31,13 +31,13 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <plat/mux.h> #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> #include <plat/usb.h> #include <plat/gpmc-smc91x.h> +#include "mux.h" #include "hsmmc.h" #define SDP2430_CS0_BASE 0x04000000 @@ -122,11 +122,7 @@ static struct omap_smc91x_platform_data board_smc91x_data = { static void __init board_smc91x_init(void) { - if (omap_rev() > OMAP3430_REV_ES1_0) - board_smc91x_data.gpio_irq = 6; - else - board_smc91x_data.gpio_irq = 29; - + omap_mux_init_gpio(149, OMAP_PIN_INPUT); gpmc_smc91x_init(&board_smc91x_data); } @@ -217,17 +213,30 @@ static struct omap_usb_config sdp2430_usb_config __initdata = { .pins[0] = 3, }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_2430sdp_init(void) { int ret; + omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC); + omap2430_i2c_init(); platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); omap_serial_init(); omap2_hsmmc_init(mmc); - omap_usb_init(&sdp2430_usb_config); + omap2_usbfs_init(&sdp2430_usb_config); + + omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); usb_musb_init(&musb_board_data); + board_smc91x_init(); /* Turn off secondary LCD backlight */ diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index dd9c03171a19..67b95b5f1a2f 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -41,7 +41,7 @@ #include <plat/control.h> #include <plat/gpmc-smc91x.h> -#include <mach/board-sdp.h> +#include <mach/board-flash.h> #include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" @@ -667,6 +667,18 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +/* + * SDP3430 V2 Board CS organization + * Different from SDP3430 V1. Now 4 switches used to specify CS + * + * See also the Switch S8 settings in the comments. + */ +static char chip_sel_3430[][GPMC_CS_NUM] = { + {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */ + {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */ + {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */ +}; + static struct mtd_partition sdp_nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -797,24 +809,18 @@ static void __init omap_3430sdp_init(void) omap_serial_init(); usb_musb_init(&musb_board_data); board_smc91x_init(); - sdp_flash_init(sdp_flash_partitions); + board_flash_init(sdp_flash_partitions, chip_sel_3430); sdp3430_display_init(); enable_board_wakeup_source(); usb_ehci_init(&ehci_pdata); } -static void __init omap_3430sdp_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap_3430sdp_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = omap_3430sdp_init_irq, .init_machine = omap_3430sdp_init, diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 57290fb3fcd7..b359c3f7bb39 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -18,10 +18,10 @@ #include <plat/common.h> #include <plat/board.h> #include <plat/gpmc-smc91x.h> -#include <plat/mux.h> #include <plat/usb.h> #include <mach/board-zoom.h> +#include <mach/board-flash.h> #include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" @@ -66,12 +66,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; -static void __init omap_sdp_map_io(void) -{ - omap2_set_globals_36xx(); - omap34xx_map_common_io(); -} - static struct omap_board_config_kernel sdp_config[] __initdata = { }; @@ -93,12 +87,131 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif +/* + * SDP3630 CS organization + * See also the Switch S8 settings in the comments. + */ +static char chip_sel_sdp[][GPMC_CS_NUM] = { + {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */ + {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */ + {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */ +}; + +static struct mtd_partition sdp_nor_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "Bootloader-NOR", + .offset = 0, + .size = SZ_256K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "Params-NOR", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "Kernel-NOR", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "Filesystem-NOR", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct mtd_partition sdp_onenand_partitions[] = { + { + .name = "X-Loader-OneNAND", + .offset = 0, + .size = 4 * (64 * 2048), + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, + { + .name = "U-Boot-OneNAND", + .offset = MTDPART_OFS_APPEND, + .size = 2 * (64 * 2048), + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, + { + .name = "U-Boot Environment-OneNAND", + .offset = MTDPART_OFS_APPEND, + .size = 1 * (64 * 2048), + }, + { + .name = "Kernel-OneNAND", + .offset = MTDPART_OFS_APPEND, + .size = 16 * (64 * 2048), + }, + { + .name = "File System-OneNAND", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition sdp_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader-NAND", + .offset = 0, + .size = 4 * (64 * 2048), + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 10 * (64 * 2048), + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "Boot Env-NAND", + + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ + .size = 6 * (64 * 2048), + }, + { + .name = "Kernel-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 40 * (64 * 2048), + }, + { + .name = "File System - NAND", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */ + }, +}; + +static struct flash_partitions sdp_flash_partitions[] = { + { + .parts = sdp_nor_partitions, + .nr_parts = ARRAY_SIZE(sdp_nor_partitions), + }, + { + .parts = sdp_onenand_partitions, + .nr_parts = ARRAY_SIZE(sdp_onenand_partitions), + }, + { + .parts = sdp_nand_partitions, + .nr_parts = ARRAY_SIZE(sdp_nand_partitions), + }, +}; + static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_serial_init(); zoom_peripherals_init(); board_smc91x_init(); + board_flash_init(sdp_flash_partitions, chip_sel_sdp); enable_board_wakeup_source(); usb_ehci_init(&ehci_pdata); } @@ -107,7 +220,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap_sdp_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = omap_sdp_init_irq, .init_machine = omap_sdp_init, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 4bb2c5d151ec..9447644774c2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -21,6 +21,7 @@ #include <linux/spi/spi.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> +#include <linux/leds.h> #include <mach/hardware.h> #include <mach/omap4-common.h> @@ -40,6 +41,54 @@ #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 +static struct gpio_led sdp4430_gpio_leds[] = { + { + .name = "omap4:green:debug0", + .gpio = 61, + }, + { + .name = "omap4:green:debug1", + .gpio = 30, + }, + { + .name = "omap4:green:debug2", + .gpio = 7, + }, + { + .name = "omap4:green:debug3", + .gpio = 8, + }, + { + .name = "omap4:green:debug4", + .gpio = 50, + }, + { + .name = "omap4:blue:user", + .gpio = 169, + }, + { + .name = "omap4:red:user", + .gpio = 170, + }, + { + .name = "omap4:green:user", + .gpio = 139, + }, + +}; + +static struct gpio_led_platform_data sdp4430_led_data = { + .leds = sdp4430_gpio_leds, + .num_leds = ARRAY_SIZE(sdp4430_gpio_leds), +}; + +static struct platform_device sdp4430_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &sdp4430_led_data, + }, +}; static struct spi_board_info sdp4430_spi_board_info[] __initdata = { { .modalias = "ks8851", @@ -112,6 +161,7 @@ static struct platform_device sdp4430_lcd_device = { static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_lcd_device, + &sdp4430_leds_gpio, }; static struct omap_lcd_config sdp4430_lcd_config __initdata = { @@ -156,14 +206,16 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { +static struct regulator_consumer_supply sdp4430_vaux_supply[] = { { .supply = "vmmc", - .dev_name = "mmci-omap-hs.0", + .dev_name = "mmci-omap-hs.1", }, +}; +static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { { .supply = "vmmc", - .dev_name = "mmci-omap-hs.1", + .dev_name = "mmci-omap-hs.0", }, }; @@ -210,6 +262,8 @@ static struct regulator_init_data sdp4430_vaux1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = 1, + .consumer_supplies = sdp4430_vaux_supply, }; static struct regulator_init_data sdp4430_vaux2 = { @@ -250,7 +304,7 @@ static struct regulator_init_data sdp4430_vmmc = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 2, + .num_consumer_supplies = 1, .consumer_supplies = sdp4430_vmmc_supply, }; @@ -353,6 +407,11 @@ static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = { .platform_data = &sdp4430_twldata, }, }; +static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { + { + I2C_BOARD_INFO("tmp105", 0x48), + }, +}; static int __init omap4_i2c_init(void) { /* @@ -362,7 +421,8 @@ static int __init omap4_i2c_init(void) omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo, ARRAY_SIZE(sdp4430_i2c_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, + ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); omap_register_i2c_bus(4, 400, NULL, 0); return 0; } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 7da92defcde0..4d0f58592864 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -461,17 +461,11 @@ static void __init am3517_evm_init(void) am3517_evm_ethernet_init(&am3517_evm_emac_pdata); } -static void __init am3517_evm_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .phys_io = 0x48000000, .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = am3517_evm_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = am3517_evm_init_irq, .init_machine = am3517_evm_init, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index bd75642aee65..c6421a72514a 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -35,13 +35,14 @@ #include <mach/gpio.h> #include <plat/led.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> #include <plat/control.h> +#include "mux.h" + /* LED & Switch macros */ #define LED0_GPIO13 13 #define LED1_GPIO14 14 @@ -244,7 +245,7 @@ static inline void __init apollon_init_smc91x(void) apollon_smc91x_resources[0].end = base + 0x30f; udelay(100); - omap_cfg_reg(W4__24XX_GPIO74); + omap_mux_init_gpio(74, 0); if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); @@ -286,15 +287,15 @@ static void __init omap_apollon_init_irq(void) static void __init apollon_led_init(void) { /* LED0 - AA10 */ - omap_cfg_reg(AA10_242X_GPIO13); + omap_mux_init_signal("vlynq_clk.gpio_13", 0); gpio_request(LED0_GPIO13, "LED0"); gpio_direction_output(LED0_GPIO13, 0); /* LED1 - AA6 */ - omap_cfg_reg(AA6_242X_GPIO14); + omap_mux_init_signal("vlynq_rx1.gpio_14", 0); gpio_request(LED1_GPIO14, "LED1"); gpio_direction_output(LED1_GPIO14, 0); /* LED2 - AA4 */ - omap_cfg_reg(AA4_242X_GPIO15); + omap_mux_init_signal("vlynq_rx0.gpio_15", 0); gpio_request(LED2_GPIO15, "LED2"); gpio_direction_output(LED2_GPIO15, 0); } @@ -303,22 +304,35 @@ static void __init apollon_usb_init(void) { /* USB device */ /* DEVICE_SUSPEND */ - omap_cfg_reg(P21_242X_GPIO12); + omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); gpio_request(12, "USB suspend"); gpio_direction_output(12, 0); - omap_usb_init(&apollon_usb_config); + omap2_usbfs_init(&apollon_usb_config); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_apollon_init(void) { u32 v; + omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); + apollon_led_init(); apollon_flash_init(); apollon_usb_init(); /* REVISIT: where's the correct place */ - omap_cfg_reg(W19_24XX_SYS_NIRQ); + omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP); + + /* LCD PWR_EN */ + omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */ v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index bc4c3f807068..e10bc109415c 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -61,8 +61,6 @@ #define SB_T35_SMSC911X_GPIO 65 #define NAND_BLOCK_SIZE SZ_128K -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS0_BASE_ADDR (OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE) #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> @@ -223,28 +221,12 @@ static struct omap_nand_platform_data cm_t35_nand_data = { .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions), .dma_channel = -1, /* disable DMA in OMAP NAND driver */ .cs = 0, - .gpmc_cs_baseaddr = (void __iomem *)GPMC_CS0_BASE_ADDR, - .gpmc_baseaddr = (void __iomem *)OMAP34XX_GPMC_VIRT, }; -static struct resource cm_t35_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cm_t35_nand_device = { - .name = "omap2-nand", - .id = -1, - .num_resources = 1, - .resource = &cm_t35_nand_resource, - .dev = { - .platform_data = &cm_t35_nand_data, - }, -}; - static void __init cm_t35_init_nand(void) { - if (platform_device_register(&cm_t35_nand_device) < 0) + if (gpmc_nand_init(&cm_t35_nand_data) < 0) pr_err("CM-T35: Unable to register NAND device\n"); } #else @@ -708,12 +690,6 @@ static void __init cm_t35_init_irq(void) omap_gpio_init(); } -static void __init cm_t35_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - static struct omap_board_mux board_mux[] __initdata = { /* nCS and IRQ for CM-T35 ethernet */ OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), @@ -836,7 +812,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .phys_io = 0x48000000, .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = cm_t35_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = cm_t35_init_irq, .init_machine = cm_t35_init, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 922b7464807f..a07086d6a0b2 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -33,6 +33,7 @@ #include <linux/i2c/twl.h> #include <mach/hardware.h> +#include <mach/id.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -58,9 +59,6 @@ #include "mux.h" #include "hsmmc.h" -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - #define NAND_BLOCK_SIZE SZ_128K #define OMAP_DM9000_GPIO_IRQ 25 @@ -104,20 +102,6 @@ static struct omap_nand_platform_data devkit8000_nand_data = { .dma_channel = -1, /* disable DMA in OMAP NAND driver */ }; -static struct resource devkit8000_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device devkit8000_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &devkit8000_nand_data, - }, - .num_resources = 1, - .resource = &devkit8000_nand_resource, -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -126,54 +110,50 @@ static struct omap2_hsmmc_info mmc[] = { }, {} /* Terminator */ }; -static struct omap_board_config_kernel devkit8000_config[] __initdata = { -}; static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) { twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 1); return 0; } static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) { + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 0); } + static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) { + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 1); return 0; } static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) { + if (gpio_is_valid(dssdev->reset_gpio)) + gpio_set_value(dssdev->reset_gpio, 0); } -static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev) -{ +static struct regulator_consumer_supply devkit8000_vmmc1_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); - return 0; -} - -static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev) -{ -} - - -static struct regulator_consumer_supply devkit8000_vmmc1_supply = { - .supply = "vmmc", -}; - -static struct regulator_consumer_supply devkit8000_vsim_supply = { - .supply = "vmmc_aux", -}; +/* ads7846 on SPI */ +static struct regulator_consumer_supply devkit8000_vio_supply = + REGULATOR_SUPPLY("vcc", "spi2.0"); static struct omap_dss_device devkit8000_lcd_device = { .name = "lcd", - .driver_name = "innolux_at_panel", + .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, + .reset_gpio = -EINVAL, /* will be replaced */ .platform_enable = devkit8000_panel_enable_lcd, .platform_disable = devkit8000_panel_disable_lcd, }; @@ -182,6 +162,7 @@ static struct omap_dss_device devkit8000_dvi_device = { .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, + .reset_gpio = -EINVAL, /* will be replaced */ .platform_enable = devkit8000_panel_enable_dvi, .platform_disable = devkit8000_panel_disable_dvi, }; @@ -191,8 +172,6 @@ static struct omap_dss_device devkit8000_tv_device = { .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = devkit8000_panel_enable_tv, - .platform_disable = devkit8000_panel_disable_tv, }; @@ -216,10 +195,8 @@ static struct platform_device devkit8000_dss_device = { }, }; -static struct regulator_consumer_supply devkit8000_vdda_dac_supply = { - .supply = "vdda_dac", - .dev = &devkit8000_dss_device.dev, -}; +static struct regulator_consumer_supply devkit8000_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); static int board_keymap[] = { KEY(0, 0, KEY_1), @@ -266,7 +243,21 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* link regulators to MMC adapters */ devkit8000_vmmc1_supply.dev = mmc[0].dev; - devkit8000_vsim_supply.dev = mmc[0].dev; + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + /* gpio + 1 is "LCD_PWREN" (out, active high) */ + devkit8000_lcd_device.reset_gpio = gpio + 1; + gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN"); + /* Disable until needed */ + gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0); + + /* gpio + 7 is "DVI_PD" (out, active low) */ + devkit8000_dvi_device.reset_gpio = gpio + 7; + gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown"); + /* Disable until needed */ + gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0); return 0; } @@ -282,16 +273,8 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { .setup = devkit8000_twl_gpio_setup, }; -static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = { - { - .supply = "vdvi", - .dev = &devkit8000_lcd_device.dev, - }, - { - .supply = "vdds_dsi", - .dev = &devkit8000_dss_device.dev, - } -}; +static struct regulator_consumer_supply devkit8000_vpll1_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data devkit8000_vmmc1 = { @@ -308,21 +291,6 @@ static struct regulator_init_data devkit8000_vmmc1 = { .consumer_supplies = &devkit8000_vmmc1_supply, }; -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data devkit8000_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vsim_supply, -}; - /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ static struct regulator_init_data devkit8000_vdac = { .constraints = { @@ -337,10 +305,9 @@ static struct regulator_init_data devkit8000_vdac = { .consumer_supplies = &devkit8000_vdda_dac_supply, }; -/* VPLL2 for digital video outputs */ -static struct regulator_init_data devkit8000_vpll2 = { +/* VPLL1 for digital video outputs */ +static struct regulator_init_data devkit8000_vpll1 = { .constraints = { - .name = "VDVI", .min_uV = 1800000, .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL @@ -348,8 +315,23 @@ static struct regulator_init_data devkit8000_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll2_supplies), - .consumer_supplies = devkit8000_vpll2_supplies, + .num_consumer_supplies = 1, + .consumer_supplies = &devkit8000_vpll1_supply, +}; + +/* VAUX4 for ads7846 and nubs */ +static struct regulator_init_data devkit8000_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &devkit8000_vio_supply, }; static struct twl4030_usb_data devkit8000_usb_data = { @@ -374,15 +356,15 @@ static struct twl4030_platform_data devkit8000_twldata = { .gpio = &devkit8000_gpio_data, .codec = &devkit8000_codec_data, .vmmc1 = &devkit8000_vmmc1, - .vsim = &devkit8000_vsim, .vdac = &devkit8000_vdac, - .vpll2 = &devkit8000_vpll2, + .vpll1 = &devkit8000_vpll1, + .vio = &devkit8000_vio, .keypad = &devkit8000_kp_data, }; static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = { { - I2C_BOARD_INFO("twl4030", 0x48), + I2C_BOARD_INFO("tps65930", 0x48), .flags = I2C_CLIENT_WAKE, .irq = INT_34XX_SYS_NIRQ, .platform_data = &devkit8000_twldata, @@ -464,8 +446,6 @@ static struct platform_device keys_gpio = { static void __init devkit8000_init_irq(void) { - omap_board_config = devkit8000_config; - omap_board_config_size = ARRAY_SIZE(devkit8000_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); @@ -560,6 +540,9 @@ static struct platform_device omap_dm9000_dev = { static void __init omap_dm9000_init(void) { + unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; + struct omap_die_id odi; + if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", OMAP_DM9000_GPIO_IRQ); @@ -567,6 +550,16 @@ static void __init omap_dm9000_init(void) } gpio_direction_input(OMAP_DM9000_GPIO_IRQ); + + /* init the mac address using DIE id */ + omap_get_die_id(&odi); + + eth_addr[0] = 0x02; /* locally administered */ + eth_addr[1] = odi.id_1 & 0xff; + eth_addr[2] = (odi.id_0 & 0xff000000) >> 24; + eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16; + eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8; + eth_addr[5] = (odi.id_0 & 0x000000ff); } static struct platform_device *devkit8000_devices[] __initdata = { @@ -581,8 +574,6 @@ static void __init devkit8000_flash_init(void) u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -604,13 +595,9 @@ static void __init devkit8000_flash_init(void) if (nandcs < GPMC_CS_NUM) { devkit8000_nand_data.cs = nandcs; - devkit8000_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - devkit8000_nand_data.gpmc_baseaddr = (void *) - (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&devkit8000_nand_device) < 0) + if (gpmc_nand_init(&devkit8000_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } @@ -797,8 +784,6 @@ static void __init devkit8000_init(void) devkit8000_i2c_init(); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); - omap_board_config = devkit8000_config; - omap_board_config_size = ARRAY_SIZE(devkit8000_config); spi_register_board_info(devkit8000_spi_board_info, ARRAY_SIZE(devkit8000_spi_board_info)); @@ -814,17 +799,11 @@ static void __init devkit8000_init(void) omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } -static void __init devkit8000_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .phys_io = 0x48000000, .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = devkit8000_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = devkit8000_init_irq, .init_machine = devkit8000_init, diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-flash.c index 2d026328e385..ac834aa7abf6 100644 --- a/arch/arm/mach-omap2/board-sdp-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -21,7 +21,7 @@ #include <plat/nand.h> #include <plat/onenand.h> #include <plat/tc.h> -#include <mach/board-sdp.h> +#include <mach/board-flash.h> #define REG_FPGA_REV 0x10 #define REG_FPGA_DIP_SWITCH_INPUT2 0x60 @@ -29,72 +29,53 @@ #define DEBUG_BASE 0x08000000 /* debug board */ -#define PDC_NOR 1 -#define PDC_NAND 2 -#define PDC_ONENAND 3 -#define DBG_MPDB 4 - /* various memory sizes */ #define FLASH_SIZE_SDPV1 SZ_64M /* NOR flash (64 Meg aligned) */ #define FLASH_SIZE_SDPV2 SZ_128M /* NOR flash (256 Meg aligned) */ -/* - * SDP3430 V2 Board CS organization - * Different from SDP3430 V1. Now 4 switches used to specify CS - * - * See also the Switch S8 settings in the comments. - * - * REVISIT: Add support for 2430 SDP - */ -static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = { - {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */ - {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */ - {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */ -}; - -static struct physmap_flash_data sdp_nor_data = { +static struct physmap_flash_data board_nor_data = { .width = 2, }; -static struct resource sdp_nor_resource = { +static struct resource board_nor_resource = { .flags = IORESOURCE_MEM, }; -static struct platform_device sdp_nor_device = { +static struct platform_device board_nor_device = { .name = "physmap-flash", .id = 0, .dev = { - .platform_data = &sdp_nor_data, + .platform_data = &board_nor_data, }, .num_resources = 1, - .resource = &sdp_nor_resource, + .resource = &board_nor_resource, }; static void -__init board_nor_init(struct flash_partitions sdp_nor_parts, u8 cs) +__init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) { int err; - sdp_nor_data.parts = sdp_nor_parts.parts; - sdp_nor_data.nr_parts = sdp_nor_parts.nr_parts; + board_nor_data.parts = nor_parts; + board_nor_data.nr_parts = nr_parts; /* Configure start address and size of NOR device */ if (omap_rev() >= OMAP3430_REV_ES1_0) { err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1, - (unsigned long *)&sdp_nor_resource.start); - sdp_nor_resource.end = sdp_nor_resource.start + (unsigned long *)&board_nor_resource.start); + board_nor_resource.end = board_nor_resource.start + FLASH_SIZE_SDPV2 - 1; } else { err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1, - (unsigned long *)&sdp_nor_resource.start); - sdp_nor_resource.end = sdp_nor_resource.start + (unsigned long *)&board_nor_resource.start); + board_nor_resource.end = board_nor_resource.start + FLASH_SIZE_SDPV1 - 1; } if (err < 0) { printk(KERN_ERR "NOR: Can't request GPMC CS\n"); return; } - if (platform_device_register(&sdp_nor_device) < 0) + if (platform_device_register(&board_nor_device) < 0) printk(KERN_ERR "Unable to register NOR device\n"); } @@ -105,17 +86,18 @@ static struct omap_onenand_platform_data board_onenand_data = { }; static void -__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs) +__init board_onenand_init(struct mtd_partition *onenand_parts, + u8 nr_parts, u8 cs) { board_onenand_data.cs = cs; - board_onenand_data.parts = sdp_onenand_parts.parts; - board_onenand_data.nr_parts = sdp_onenand_parts.nr_parts; + board_onenand_data.parts = onenand_parts; + board_onenand_data.nr_parts = nr_parts; gpmc_onenand_init(&board_onenand_data); } #else static void -__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs) +__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) { } #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */ @@ -147,7 +129,7 @@ static struct gpmc_timings nand_timings = { .wr_data_mux_bus = 0, }; -static struct omap_nand_platform_data sdp_nand_data = { +static struct omap_nand_platform_data board_nand_data = { .nand_setup = NULL, .gpmc_t = &nand_timings, .dma_channel = -1, /* disable DMA in OMAP NAND driver */ @@ -155,23 +137,18 @@ static struct omap_nand_platform_data sdp_nand_data = { .devsize = 0, /* '0' for 8-bit, '1' for 16-bit device */ }; -static void -__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs) +void +__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs) { - sdp_nand_data.cs = cs; - sdp_nand_data.parts = sdp_nand_parts.parts; - sdp_nand_data.nr_parts = sdp_nand_parts.nr_parts; + board_nand_data.cs = cs; + board_nand_data.parts = nand_parts; + board_nand_data.nr_parts = nr_parts; - sdp_nand_data.gpmc_cs_baseaddr = (void *)(OMAP34XX_GPMC_VIRT + - GPMC_CS0_BASE + - cs * GPMC_CS_SIZE); - sdp_nand_data.gpmc_baseaddr = (void *) (OMAP34XX_GPMC_VIRT); - - gpmc_nand_init(&sdp_nand_data); + gpmc_nand_init(&board_nand_data); } #else -static void -__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs) +void +__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs) { } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ @@ -215,7 +192,8 @@ unmap: * * @return - void. */ -void __init sdp_flash_init(struct flash_partitions sdp_partition_info[]) +void board_flash_init(struct flash_partitions partition_info[], + char chip_sel_board[][GPMC_CS_NUM]) { u8 cs = 0; u8 norcs = GPMC_CS_NUM + 1; @@ -232,7 +210,7 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[]) printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs); return; } - config_sel = (unsigned char *)(chip_sel_sdp[idx]); + config_sel = (unsigned char *)(chip_sel_board[idx]); while (cs < GPMC_CS_NUM) { switch (config_sel[cs]) { @@ -256,17 +234,20 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[]) printk(KERN_INFO "NOR: Unable to find configuration " "in GPMC\n"); else - board_nor_init(sdp_partition_info[0], norcs); + board_nor_init(partition_info[0].parts, + partition_info[0].nr_parts, norcs); if (onenandcs > GPMC_CS_NUM) printk(KERN_INFO "OneNAND: Unable to find configuration " "in GPMC\n"); else - board_onenand_init(sdp_partition_info[1], onenandcs); + board_onenand_init(partition_info[1].parts, + partition_info[1].nr_parts, onenandcs); if (nandcs > GPMC_CS_NUM) printk(KERN_INFO "NAND: Unable to find configuration " "in GPMC\n"); else - board_nand_init(sdp_partition_info[2], nandcs); + board_nand_init(partition_info[2].parts, + partition_info[2].nr_parts, nandcs); } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 9242902d3a43..3482b99e8c86 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -26,7 +26,6 @@ #include <asm/mach/map.h> #include <mach/gpio.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 16703fdb3515..e09bd686389f 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,7 +33,6 @@ #include <plat/control.h> #include <mach/gpio.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> @@ -42,6 +41,8 @@ #include <plat/dma.h> #include <plat/gpmc.h> +#include "mux.h" + #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 @@ -246,7 +247,7 @@ static inline void __init h4_init_debug(void) udelay(100); - omap_cfg_reg(M15_24XX_GPIO92); + omap_mux_init_gpio(92, 0); if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0) gpmc_cs_free(eth_cs); @@ -272,27 +273,6 @@ static struct omap_lcd_config h4_lcd_config __initdata = { }; static struct omap_usb_config h4_usb_config __initdata = { -#ifdef CONFIG_MACH_OMAP2_H4_USB1 - /* NOTE: usb1 could also be used with 3 wire signaling */ - .pins[1] = 4, -#endif - -#ifdef CONFIG_MACH_OMAP_H4_OTG - /* S1.10 ON -- USB OTG port - * usb0 switched to Mini-AB port and isp1301 transceiver; - * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging - */ - .otg = 1, - .pins[0] = 4, -#ifdef CONFIG_USB_GADGET_OMAP - /* use OTG cable, or standard A-to-MiniB */ - .hmc_mode = 0x14, /* 0:dev/otg 1:host 2:disable */ -#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - /* use OTG cable, or NONSTANDARD (B-to-MiniB) */ - .hmc_mode = 0x11, /* 0:host 1:host 2:disable */ -#endif /* XX */ - -#else /* S1.10 OFF -- usb "download port" * usb0 switched to Mini-B port and isp1105 transceiver; * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging @@ -301,7 +281,6 @@ static struct omap_usb_config h4_usb_config __initdata = { .pins[0] = 3, /* .hmc_mode = 0x14,*/ /* 0:dev 1:host 2:disable */ .hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */ -#endif }; static struct omap_board_config_kernel h4_config[] = { @@ -338,31 +317,54 @@ static struct i2c_board_info __initdata h4_i2c_board_info[] = { }, }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_h4_init(void) { + omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF); + /* * Make sure the serial ports are muxed on at this point. * You have to mux them off in device drivers later on * if not needed. */ -#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) - omap_cfg_reg(K15_24XX_UART3_TX); - omap_cfg_reg(K14_24XX_UART3_RX); -#endif #if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) + omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); if (omap_has_menelaus()) { + omap_mux_init_signal("sdrc_a14.gpio0", + OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_signal("vlynq_rx0.gpio_15", 0); + omap_mux_init_signal("gpio_98", 0); row_gpios[5] = 0; col_gpios[2] = 15; col_gpios[6] = 18; + } else { + omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_signal("gpio_100", 0); + omap_mux_init_signal("gpio_98", 0); } + omap_mux_init_signal("gpio_90", 0); + omap_mux_init_signal("gpio_91", 0); + omap_mux_init_signal("gpio_36", 0); + omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); + omap_mux_init_signal("gpio_97", 0); #endif i2c_register_board_info(1, h4_i2c_board_info, ARRAY_SIZE(h4_i2c_board_info)); platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); - omap_usb_init(&h4_usb_config); + omap2_usbfs_init(&h4_usb_config); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 759e39d1a702..175f04339761 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -532,17 +532,11 @@ static void __init igep2_init(void) pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n"); } -static void __init igep2_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(IGEP0020, "IGEP v2 board") .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = igep2_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = igep2_init_irq, .init_machine = igep2_init, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 9cd2669113e4..00d9b13b01c5 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -38,6 +38,7 @@ #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> +#include <mach/board-zoom.h> #include <asm/delay.h> #include <plat/control.h> @@ -388,6 +389,38 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; +static struct mtd_partition ldp_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader-NAND", + .offset = 0, + .size = 4 * (64 * 2048), /* 512KB, 0x80000 */ + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */ + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "Boot Env-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ + .size = 2 * (64 * 2048), /* 256KB, 0x40000 */ + }, + { + .name = "Kernel-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/ + .size = 240 * (64 * 2048), /* 30M, 0x1E00000 */ + }, + { + .name = "File System - NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */ + .size = MTDPART_SIZ_FULL, /* 96MB, 0x6000000 */ + }, + +}; + static void __init omap_ldp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -400,23 +433,19 @@ static void __init omap_ldp_init(void) ads7846_dev_init(); omap_serial_init(); usb_musb_init(&musb_board_data); + board_nand_init(ldp_nand_partitions, + ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS); omap2_hsmmc_init(mmc); /* link regulators to MMC adapters */ ldp_vmmc1_supply.dev = mmc[0].dev; } -static void __init omap_ldp_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(OMAP_LDP, "OMAP LDP board") .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap_ldp_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = omap_ldp_init_irq, .init_machine = omap_ldp_init, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 2565ff08a221..a3e2b49aa39f 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -33,6 +33,8 @@ #include <plat/mmc.h> #include <plat/serial.h> +#include "mux.h" + static int slot1_cover_open; static int slot2_cover_open; static struct device *mmc_device; @@ -649,8 +651,17 @@ static void __init n8x0_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init n8x0_init_machine(void) { + omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); /* FIXME: add n810 spi devices */ spi_register_board_info(n800_spi_board_info, ARRAY_SIZE(n800_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 0ab0c26db4dd..87969c7df652 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -48,9 +48,6 @@ #include "mux.h" #include "hsmmc.h" -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - #define NAND_BLOCK_SIZE SZ_128K static struct mtd_partition omap3beagle_nand_partitions[] = { @@ -93,20 +90,6 @@ static struct omap_nand_platform_data omap3beagle_nand_data = { .dev_ready = NULL, }; -static struct resource omap3beagle_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device omap3beagle_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &omap3beagle_nand_data, - }, - .num_resources = 1, - .resource = &omap3beagle_nand_resource, -}; - /* DSS */ static int beagle_enable_dvi(struct omap_dss_device *dssdev) @@ -424,8 +407,6 @@ static void __init omap3beagle_flash_init(void) u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -447,12 +428,9 @@ static void __init omap3beagle_flash_init(void) if (nandcs < GPMC_CS_NUM) { omap3beagle_nand_data.cs = nandcs; - omap3beagle_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&omap3beagle_nand_device) < 0) + if (gpmc_nand_init(&omap3beagle_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } @@ -507,18 +485,12 @@ static void __init omap3_beagle_init(void) beagle_display_init(); } -static void __init omap3_beagle_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap3_beagle_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = omap3_beagle_init_irq, .init_machine = omap3_beagle_init, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index a3d2e285e116..f76d9c0a47a1 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -514,14 +514,11 @@ static struct regulator_init_data omap3_evm_vdac = { }; /* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_evm_vpll2_supply = { - .supply = "vdvi", - .dev = &omap3_evm_lcd_device.dev, -}; +static struct regulator_consumer_supply omap3_evm_vpll2_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); static struct regulator_init_data omap3_evm_vpll2 = { .constraints = { - .name = "VDVI", .min_uV = 1800000, .max_uV = 1800000, .apply_uV = true, @@ -715,18 +712,12 @@ static void __init omap3_evm_init(void) omap3_evm_display_init(); } -static void __init omap3_evm_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(OMAP3EVM, "OMAP3 EVM") /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap3_evm_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = omap3_evm_init_irq, .init_machine = omap3_evm_init, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index c0f4f12eba54..55836fa35060 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -25,6 +25,9 @@ #include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> +#include <linux/spi/wl12xx.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> #include <linux/leds.h> #include <linux/input.h> #include <linux/input/matrix_keypad.h> @@ -41,15 +44,49 @@ #include <plat/mcspi.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/nand.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#define PANDORA_WIFI_IRQ_GPIO 21 +#define PANDORA_WIFI_NRESET_GPIO 23 #define OMAP3_PANDORA_TS_GPIO 94 -/* hardware debounce: (value + 1) * 31us */ -#define GPIO_DEBOUNCE_TIME 127 +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition omap3pandora_nand_partitions[] = { + { + .name = "xloader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE + }, { + .name = "uboot", + .offset = MTDPART_OFS_APPEND, + .size = 15 * NAND_BLOCK_SIZE, + }, { + .name = "uboot-env", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + }, { + .name = "boot", + .offset = MTDPART_OFS_APPEND, + .size = 80 * NAND_BLOCK_SIZE, + }, { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data pandora_nand_data = { + .cs = 0, + .devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */ + .parts = omap3pandora_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions), +}; static struct gpio_led pandora_gpio_leds[] = { { @@ -88,6 +125,7 @@ static struct platform_device pandora_leds_gpio = { .type = ev_type, \ .code = ev_code, \ .active_low = act_low, \ + .debounce_interval = 4, \ .desc = "btn " descr, \ } @@ -99,14 +137,14 @@ static struct gpio_keys_button pandora_gpio_keys[] = { GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), - GPIO_BUTTON_LOW(109, KEY_KP1, "game 1"), - GPIO_BUTTON_LOW(111, KEY_KP2, "game 2"), - GPIO_BUTTON_LOW(106, KEY_KP3, "game 3"), - GPIO_BUTTON_LOW(101, KEY_KP4, "game 4"), - GPIO_BUTTON_LOW(102, BTN_TL, "l"), - GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), - GPIO_BUTTON_LOW(105, BTN_TR, "r"), - GPIO_BUTTON_LOW(107, BTN_TR2, "r2"), + GPIO_BUTTON_LOW(109, KEY_PAGEUP, "game 1"), + GPIO_BUTTON_LOW(111, KEY_END, "game 2"), + GPIO_BUTTON_LOW(106, KEY_PAGEDOWN, "game 3"), + GPIO_BUTTON_LOW(101, KEY_HOME, "game 4"), + GPIO_BUTTON_LOW(102, KEY_RIGHTSHIFT, "l"), + GPIO_BUTTON_LOW(97, KEY_KPPLUS, "l2"), + GPIO_BUTTON_LOW(105, KEY_RIGHTCTRL, "r"), + GPIO_BUTTON_LOW(107, KEY_KPMINUS, "r2"), GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"), GPIO_BUTTON_LOW(99, KEY_MENU, "menu"), GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"), @@ -127,14 +165,7 @@ static struct platform_device pandora_keys_gpio = { }, }; -static void __init pandora_keys_gpio_init(void) -{ - /* set debounce time for GPIO banks 4 and 6 */ - gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME); - gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME); -} - -static int board_keymap[] = { +static const uint32_t board_keymap[] = { /* row, col, code */ KEY(0, 0, KEY_9), KEY(0, 1, KEY_8), @@ -255,12 +286,33 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { static int omap3pandora_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret, gpio_32khz; + /* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */ omap3pandora_mmc[0].gpio_cd = gpio + 0; omap3pandora_mmc[1].gpio_cd = gpio + 1; omap2_hsmmc_init(omap3pandora_mmc); + /* gpio + 13 drives 32kHz buffer for wifi module */ + gpio_32khz = gpio + 13; + ret = gpio_request(gpio_32khz, "wifi 32kHz"); + if (ret < 0) { + pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret); + goto fail; + } + + ret = gpio_direction_output(gpio_32khz, 1); + if (ret < 0) { + pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret); + goto fail_direction; + } + return 0; + +fail_direction: + gpio_free(gpio_32khz); +fail: + return -ENODEV; } static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { @@ -539,10 +591,67 @@ static void __init omap3pandora_init_irq(void) omap_gpio_init(); } +static void pandora_wl1251_set_power(bool enable) +{ + /* + * Keep power always on until wl1251_sdio driver learns to re-init + * the chip after powering it down and back up. + */ +} + +static struct wl12xx_platform_data pandora_wl1251_pdata = { + .set_power = pandora_wl1251_set_power, + .use_eeprom = true, +}; + +static struct platform_device pandora_wl1251_data = { + .name = "wl1251_data", + .id = -1, + .dev = { + .platform_data = &pandora_wl1251_pdata, + }, +}; + +static void pandora_wl1251_init(void) +{ + int ret; + + ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq"); + if (ret < 0) + goto fail; + + ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO); + if (ret < 0) + goto fail_irq; + + pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); + if (pandora_wl1251_pdata.irq < 0) + goto fail_irq; + + ret = gpio_request(PANDORA_WIFI_NRESET_GPIO, "wl1251 nreset"); + if (ret < 0) + goto fail_irq; + + /* start powered so that it probes with MMC subsystem */ + ret = gpio_direction_output(PANDORA_WIFI_NRESET_GPIO, 1); + if (ret < 0) + goto fail_nreset; + + return; + +fail_nreset: + gpio_free(PANDORA_WIFI_NRESET_GPIO); +fail_irq: + gpio_free(PANDORA_WIFI_IRQ_GPIO); +fail: + printk(KERN_ERR "wl1251 board initialisation failed\n"); +} + static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, &pandora_dss_device, + &pandora_wl1251_data, }; static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -575,6 +684,7 @@ static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3pandora_i2c_init(); + pandora_wl1251_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); omap_serial_init(); @@ -582,25 +692,19 @@ static void __init omap3pandora_init(void) ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); usb_ehci_init(&ehci_pdata); - pandora_keys_gpio_init(); usb_musb_init(&musb_board_data); + gpmc_nand_init(&pandora_nand_data); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } -static void __init omap3pandora_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap3pandora_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = omap3pandora_init_irq, .init_machine = omap3pandora_init, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index a04cffd691c5..bcd01d278c65 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -652,18 +652,12 @@ static void __init omap3_stalker_init(void) omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); } -static void __init omap3_stalker_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(SBC3530, "OMAP3 STALKER") /* Maintainer: Jason Lam -lzg@ema-tech.com */ .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap3_stalker_map_io, + .map_io = omap3_map_io, .init_irq = omap3_stalker_init_irq, .init_machine = omap3_stalker_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index f05b867c5851..663c62d271e8 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -54,9 +54,6 @@ #include <asm/setup.h> -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - #define NAND_BLOCK_SIZE SZ_128K #define OMAP3_AC_GPIO 136 @@ -106,20 +103,6 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = { .dev_ready = NULL, }; -static struct resource omap3touchbook_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device omap3touchbook_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &omap3touchbook_nand_data, - }, - .num_resources = 1, - .resource = &omap3touchbook_nand_resource, -}; - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -458,8 +441,6 @@ static void __init omap3touchbook_flash_init(void) u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -481,13 +462,9 @@ static void __init omap3touchbook_flash_init(void) if (nandcs < GPMC_CS_NUM) { omap3touchbook_nand_data.cs = nandcs; - omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - omap3touchbook_nand_data.gpmc_baseaddr = - (void *) (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&omap3touchbook_nand_device) < 0) + if (gpmc_nand_init(&omap3touchbook_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } @@ -559,18 +536,12 @@ static void __init omap3_touchbook_init(void) omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } -static void __init omap3_touchbook_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ .phys_io = 0x48000000, .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap3_touchbook_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = omap3_touchbook_init_irq, .init_machine = omap3_touchbook_init, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c new file mode 100644 index 000000000000..c03d1d56db56 --- /dev/null +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -0,0 +1,304 @@ +/* + * Board support file for OMAP4430 based PandaBoard. + * + * Copyright (C) 2010 Texas Instruments + * + * Author: David Anders <x0132446@ti.com> + * + * Based on mach-omap2/board-4430sdp.c + * + * Author: Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Based on mach-omap2/board-3430sdp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/usb/otg.h> +#include <linux/i2c/twl.h> +#include <linux/regulator/machine.h> + +#include <mach/hardware.h> +#include <mach/omap4-common.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/board.h> +#include <plat/common.h> +#include <plat/control.h> +#include <plat/timer-gp.h> +#include <plat/usb.h> +#include <plat/mmc.h> +#include "hsmmc.h" + + +static void __init omap4_panda_init_irq(void) +{ + omap2_init_common_hw(NULL, NULL); + gic_init_irq(); + omap_gpio_init(); +} + +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_UTMI, + .mode = MUSB_PERIPHERAL, + .power = 100, +}; + +static struct omap2_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 8, + .gpio_wp = -EINVAL, + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = { + { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.0", + }, + { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.1", + }, +}; + +static int omap4_twl6030_hsmmc_late_init(struct device *dev) +{ + int ret = 0; + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_mmc_platform_data *pdata = dev->platform_data; + + /* Setting MMC1 Card detect Irq */ + if (pdev->id == 0) + pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE + + MMCDETECT_INTR_OFFSET; + return ret; +} + +static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) +{ + struct omap_mmc_platform_data *pdata = dev->platform_data; + + pdata->init = omap4_twl6030_hsmmc_late_init; +} + +static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) +{ + struct omap2_hsmmc_info *c; + + omap2_hsmmc_init(controllers); + for (c = controllers; c->mmc; c++) + omap4_twl6030_hsmmc_set_late_init(c->dev); + + return 0; +} + +static struct regulator_init_data omap4_panda_vaux1 = { + .constraints = { + .min_uV = 1000000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_panda_vaux2 = { + .constraints = { + .min_uV = 1200000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_panda_vaux3 = { + .constraints = { + .min_uV = 1000000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +/* VMMC1 for MMC1 card */ +static struct regulator_init_data omap4_panda_vmmc = { + .constraints = { + .min_uV = 1200000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 2, + .consumer_supplies = omap4_panda_vmmc_supply, +}; + +static struct regulator_init_data omap4_panda_vpp = { + .constraints = { + .min_uV = 1800000, + .max_uV = 2500000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_panda_vusim = { + .constraints = { + .min_uV = 1200000, + .max_uV = 2900000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_panda_vana = { + .constraints = { + .min_uV = 2100000, + .max_uV = 2100000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_panda_vcxio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_panda_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_panda_vusb = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct twl4030_platform_data omap4_panda_twldata = { + .irq_base = TWL6030_IRQ_BASE, + .irq_end = TWL6030_IRQ_END, + + /* Regulators */ + .vmmc = &omap4_panda_vmmc, + .vpp = &omap4_panda_vpp, + .vusim = &omap4_panda_vusim, + .vana = &omap4_panda_vana, + .vcxio = &omap4_panda_vcxio, + .vdac = &omap4_panda_vdac, + .vusb = &omap4_panda_vusb, + .vaux1 = &omap4_panda_vaux1, + .vaux2 = &omap4_panda_vaux2, + .vaux3 = &omap4_panda_vaux3, +}; + +static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl6030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = OMAP44XX_IRQ_SYS_1N, + .platform_data = &omap4_panda_twldata, + }, +}; +static int __init omap4_panda_i2c_init(void) +{ + /* + * Phoenix Audio IC needs I2C1 to + * start with 400 KHz or less + */ + omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo, + ARRAY_SIZE(omap4_panda_i2c_boardinfo)); + omap_register_i2c_bus(2, 400, NULL, 0); + omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(4, 400, NULL, 0); + return 0; +} +static void __init omap4_panda_init(void) +{ + int status; + + omap4_panda_i2c_init(); + omap_serial_init(); + omap4_twl6030_hsmmc_init(mmc); + /* OMAP4 Panda uses internal transceiver so register nop transceiver */ + usb_nop_xceiv_register(); + /* FIXME: allow multi-omap to boot until musb is updated for omap4 */ + if (!cpu_is_omap44xx()) + usb_musb_init(&musb_board_data); +} + +static void __init omap4_panda_map_io(void) +{ + omap2_set_globals_443x(); + omap44xx_map_common_io(); +} + +MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") + /* Maintainer: David Anders - Texas Instruments Inc */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap4_panda_map_io, + .init_irq = omap4_panda_init_irq, + .init_machine = omap4_panda_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 87acb2f198ec..4c4843618350 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -58,8 +58,6 @@ #define OVERO_GPIO_USBH_NRESET 183 #define NAND_BLOCK_SIZE SZ_128K -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 #define OVERO_SMSC911X_CS 5 #define OVERO_SMSC911X_GPIO 176 @@ -166,9 +164,26 @@ static struct platform_device overo_smsc911x_device = { }, }; +static struct platform_device overo_smsc911x2_device = { + .name = "smsc911x", + .id = 1, + .num_resources = ARRAY_SIZE(overo_smsc911x2_resources), + .resource = overo_smsc911x2_resources, + .dev = { + .platform_data = &overo_smsc911x_config, + }, +}; + +static struct platform_device *smsc911x_devices[] = { + &overo_smsc911x_device, + &overo_smsc911x2_device, +}; + static inline void __init overo_init_smsc911x(void) { - unsigned long cs_mem_base; + unsigned long cs_mem_base, cs_mem_base2; + + /* set up first smsc911x chip */ if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n"); @@ -189,7 +204,28 @@ static inline void __init overo_init_smsc911x(void) overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO); overo_smsc911x_resources[1].end = 0; - platform_device_register(&overo_smsc911x_device); + /* set up second smsc911x chip */ + + if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) { + printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n"); + return; + } + + overo_smsc911x2_resources[0].start = cs_mem_base2 + 0x0; + overo_smsc911x2_resources[0].end = cs_mem_base2 + 0xff; + + if ((gpio_request(OVERO_SMSC911X2_GPIO, "SMSC911X2 IRQ") == 0) && + (gpio_direction_input(OVERO_SMSC911X2_GPIO) == 0)) { + gpio_export(OVERO_SMSC911X2_GPIO, 0); + } else { + printk(KERN_ERR "could not obtain gpio for SMSC911X2 IRQ\n"); + return; + } + + overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO); + overo_smsc911x2_resources[1].end = 0; + + platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices)); } #else @@ -231,28 +267,11 @@ static struct omap_nand_platform_data overo_nand_data = { .dma_channel = -1, /* disable DMA in OMAP NAND driver */ }; -static struct resource overo_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device overo_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &overo_nand_data, - }, - .num_resources = 1, - .resource = &overo_nand_resource, -}; - - static void __init overo_flash_init(void) { u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -274,12 +293,9 @@ static void __init overo_flash_init(void) if (nandcs < GPMC_CS_NUM) { overo_nand_data.cs = nandcs; - overo_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&overo_nand_device) < 0) + if (gpmc_nand_init(&overo_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } @@ -484,17 +500,11 @@ static void __init overo_init(void) "OVERO_GPIO_USBH_CPEN\n"); } -static void __init overo_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(OVERO, "Gumstix Overo") .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = overo_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = overo_init_irq, .init_machine = overo_init, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 03483920ed6e..9a5eb87425fc 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -25,7 +25,6 @@ #include <linux/mmc/host.h> #include <plat/mcspi.h> -#include <plat/mux.h> #include <plat/board.h> #include <plat/common.h> #include <plat/dma.h> @@ -33,6 +32,11 @@ #include <plat/onenand.h> #include <plat/gpmc-smc91x.h> +#include <sound/tlv320aic3x.h> +#include <sound/tpa6130a2-plat.h> + +#include <../drivers/staging/iio/light/tsl2563.h> + #include "mux.h" #include "hsmmc.h" @@ -51,6 +55,12 @@ enum { static struct wl12xx_platform_data wl1251_pdata; +#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) +static struct tsl2563_platform_data rx51_tsl2563_platform_data = { + .cover_comp_gain = 16, +}; +#endif + static struct omap2_mcspi_device_config wl1251_mcspi_config = { .turbo_mode = 0, .single_channel = 1, @@ -311,48 +321,29 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct regulator_consumer_supply rx51_vmmc1_supply = { - .supply = "vmmc", - .dev_name = "mmci-omap-hs.0", -}; +static struct regulator_consumer_supply rx51_vmmc1_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); -static struct regulator_consumer_supply rx51_vaux3_supply = { - .supply = "vmmc", - .dev_name = "mmci-omap-hs.1", -}; +static struct regulator_consumer_supply rx51_vaux3_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); -static struct regulator_consumer_supply rx51_vsim_supply = { - .supply = "vmmc_aux", - .dev_name = "mmci-omap-hs.1", -}; +static struct regulator_consumer_supply rx51_vsim_supply = + REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1"); static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { /* tlv320aic3x analog supplies */ - { - .supply = "AVDD", - .dev_name = "2-0018", - }, - { - .supply = "DRVDD", - .dev_name = "2-0018", - }, + REGULATOR_SUPPLY("AVDD", "2-0018"), + REGULATOR_SUPPLY("DRVDD", "2-0018"), + /* tpa6130a2 */ + REGULATOR_SUPPLY("Vdd", "2-0060"), /* Keep vmmc as last item. It is not iterated for newer boards */ - { - .supply = "vmmc", - .dev_name = "mmci-omap-hs.1", - }, + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"), }; static struct regulator_consumer_supply rx51_vio_supplies[] = { /* tlv320aic3x digital supplies */ - { - .supply = "IOVDD", - .dev_name = "2-0018" - }, - { - .supply = "DVDD", - .dev_name = "2-0018" - }, + REGULATOR_SUPPLY("IOVDD", "2-0018"), + REGULATOR_SUPPLY("DVDD", "2-0018"), }; #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) @@ -373,6 +364,7 @@ static struct regulator_init_data rx51_vaux1 = { .name = "V28", .min_uV = 2800000, .max_uV = 2800000, + .always_on = true, /* due battery cover sensor */ .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE @@ -718,6 +710,15 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vio = &rx51_vio, }; +static struct aic3x_pdata rx51_aic3x_data __initdata = { + .gpio_reset = 60, +}; + +static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = { + .id = TPA6130A2, + .power_gpio = 98, +}; + static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { { I2C_BOARD_INFO("twl5030", 0x48), @@ -730,7 +731,18 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { { I2C_BOARD_INFO("tlv320aic3x", 0x18), + .platform_data = &rx51_aic3x_data, + }, +#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) + { + I2C_BOARD_INFO("tsl2563", 0x29), + .platform_data = &rx51_tsl2563_platform_data, }, +#endif + { + I2C_BOARD_INFO("tpa6130a2", 0x60), + .platform_data = &rx51_tpa6130a2_data, + } }; static int __init rx51_i2c_init(void) diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index b743a4f42649..5a1005ba9815 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -16,7 +16,6 @@ #include <linux/mm.h> #include <asm/mach-types.h> -#include <plat/mux.h> #include <plat/display.h> #include <plat/vram.h> #include <plat/mcspi.h> diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 3bd956f9e19f..a58e8cb1a7fc 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -143,7 +143,7 @@ static void __init rx51_init(void) static void __init rx51_map_io(void) { - omap2_set_globals_343x(); + omap2_set_globals_3xxx(); rx51_video_mem_init(); omap34xx_map_common_io(); } diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index ffe188cb18e9..3ad9ecf7f5e2 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -71,30 +71,80 @@ static struct twl4030_platform_data zoom2_twldata = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* WLAN IRQ - GPIO 162 */ + OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + /* WLAN POWER ENABLE - GPIO 101 */ + OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* WLAN SDIO: MMC3 CMD */ + OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP), + /* WLAN SDIO: MMC3 CLK */ + OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + /* WLAN SDIO: MMC3 DAT[0-3] */ + OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else #define board_mux NULL #endif +static struct mtd_partition zoom_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader-NAND", + .offset = 0, + .size = 4 * (64 * 2048), /* 512KB, 0x80000 */ + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */ + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "Boot Env-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ + .size = 2 * (64 * 2048), /* 256KB, 0x40000 */ + }, + { + .name = "Kernel-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/ + .size = 240 * (64 * 2048), /* 30M, 0x1E00000 */ + }, + { + .name = "system", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */ + .size = 3328 * (64 * 2048), /* 416M, 0x1A000000 */ + }, + { + .name = "userdata", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1C000000*/ + .size = 256 * (64 * 2048), /* 32M, 0x2000000 */ + }, + { + .name = "cache", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1E000000*/ + .size = 256 * (64 * 2048), /* 32M, 0x2000000 */ + }, +}; + static void __init omap_zoom2_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); zoom_peripherals_init(); + board_nand_init(zoom_nand_partitions, + ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); zoom_debugboard_init(); } -static void __init omap_zoom2_map_io(void) -{ - omap2_set_globals_343x(); - omap34xx_map_common_io(); -} - MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .phys_io = ZOOM_UART_BASE, .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap_zoom2_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = omap_zoom2_init_irq, .init_machine = omap_zoom2_init, diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 5b605eba3e7b..6ca0b8341615 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -25,15 +25,50 @@ #include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" -static void __init omap_zoom_map_io(void) -{ - omap2_set_globals_36xx(); - omap34xx_map_common_io(); -} - static struct omap_board_config_kernel zoom_config[] __initdata = { }; +static struct mtd_partition zoom_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader-NAND", + .offset = 0, + .size = 4 * (64 * 2048), /* 512KB, 0x80000 */ + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */ + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "Boot Env-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ + .size = 2 * (64 * 2048), /* 256KB, 0x40000 */ + }, + { + .name = "Kernel-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/ + .size = 240 * (64 * 2048), /* 30M, 0x1E00000 */ + }, + { + .name = "system", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */ + .size = 3328 * (64 * 2048), /* 416M, 0x1A000000 */ + }, + { + .name = "userdata", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1C000000*/ + .size = 256 * (64 * 2048), /* 32M, 0x2000000 */ + }, + { + .name = "cache", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1E000000*/ + .size = 256 * (64 * 2048), /* 32M, 0x2000000 */ + }, +}; + static void __init omap_zoom_init_irq(void) { omap_board_config = zoom_config; @@ -46,6 +81,19 @@ static void __init omap_zoom_init_irq(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* WLAN IRQ - GPIO 162 */ + OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + /* WLAN POWER ENABLE - GPIO 101 */ + OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* WLAN SDIO: MMC3 CMD */ + OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP), + /* WLAN SDIO: MMC3 CLK */ + OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + /* WLAN SDIO: MMC3 DAT[0-3] */ + OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), + OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -66,6 +114,8 @@ static void __init omap_zoom_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); + board_nand_init(zoom_nand_partitions, + ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); zoom_debugboard_init(); omap_mux_init_gpio(64, OMAP_PIN_OUTPUT); @@ -76,7 +126,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .phys_io = ZOOM_UART_BASE, .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap_zoom_map_io, + .map_io = omap3_map_io, .reserve = omap_reserve, .init_irq = omap_zoom_init_irq, .init_machine = omap_zoom_init, diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index d33744117ce2..138646deac89 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -1408,7 +1408,7 @@ static struct clk ts_fck = { static struct clk usbtll_fck = { .name = "usbtll_fck", - .ops = &clkops_omap2_dflt, + .ops = &clkops_omap2_dflt_wait, .parent = &dpll5_m2_ck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c index 2d83565d2be2..721c3b66740a 100644 --- a/arch/arm/mach-omap2/cm.c +++ b/arch/arm/mach-omap2/cm.c @@ -50,15 +50,15 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) cm_idlest_reg = cm_idlest_offs[idlest_id - 1]; + mask = 1 << idlest_shift; + if (cpu_is_omap24xx()) - ena = idlest_shift; + ena = mask; else if (cpu_is_omap34xx()) ena = 0; else BUG(); - mask = 1 << idlest_shift; - /* XXX should be OMAP2 CM */ omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena), MAX_MODULE_READY_TIME, i); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 03e6c9ed82a4..2dbb265bedd4 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -25,7 +25,6 @@ #include <plat/control.h> #include <plat/tc.h> #include <plat/board.h> -#include <plat/mux.h> #include <mach/gpio.h> #include <plat/mmc.h> #include <plat/dma.h> @@ -153,10 +152,12 @@ static struct resource omap2_mbox_resources[] = { { .start = INT_24XX_MAIL_U0_MPU, .flags = IORESOURCE_IRQ, + .name = "dsp", }, { .start = INT_24XX_MAIL_U3_MPU, .flags = IORESOURCE_IRQ, + .name = "iva", }, }; static int omap2_mbox_resources_sz = ARRAY_SIZE(omap2_mbox_resources); @@ -175,6 +176,7 @@ static struct resource omap3_mbox_resources[] = { { .start = INT_24XX_MAIL_U0_MPU, .flags = IORESOURCE_IRQ, + .name = "dsp", }, }; static int omap3_mbox_resources_sz = ARRAY_SIZE(omap3_mbox_resources); @@ -196,6 +198,7 @@ static struct resource omap4_mbox_resources[] = { { .start = OMAP44XX_IRQ_MAIL_U0, .flags = IORESOURCE_IRQ, + .name = "mbox", }, }; static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources); @@ -205,7 +208,7 @@ static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources); #endif static struct platform_device mbox_device = { - .name = "omap2-mailbox", + .name = "omap-mailbox", .id = -1, }; @@ -230,64 +233,7 @@ static inline void omap_init_mbox(void) static inline void omap_init_mbox(void) { } #endif /* CONFIG_OMAP_MBOX_FWK */ -#if defined(CONFIG_OMAP_STI) - -#if defined(CONFIG_ARCH_OMAP2) - -#define OMAP2_STI_BASE 0x48068000 -#define OMAP2_STI_CHANNEL_BASE 0x54000000 -#define OMAP2_STI_IRQ 4 - -static struct resource sti_resources[] = { - { - .start = OMAP2_STI_BASE, - .end = OMAP2_STI_BASE + 0x7ff, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP2_STI_CHANNEL_BASE, - .end = OMAP2_STI_CHANNEL_BASE + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP2_STI_IRQ, - .flags = IORESOURCE_IRQ, - } -}; -#elif defined(CONFIG_ARCH_OMAP3) - -#define OMAP3_SDTI_BASE 0x54500000 -#define OMAP3_SDTI_CHANNEL_BASE 0x54600000 - -static struct resource sti_resources[] = { - { - .start = OMAP3_SDTI_BASE, - .end = OMAP3_SDTI_BASE + 0xFFF, - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP3_SDTI_CHANNEL_BASE, - .end = OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - } -}; - -#endif - -static struct platform_device sti_device = { - .name = "sti", - .id = -1, - .num_resources = ARRAY_SIZE(sti_resources), - .resource = sti_resources, -}; - -static inline void omap_init_sti(void) -{ - platform_device_register(&sti_device); -} -#else static inline void omap_init_sti(void) {} -#endif #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) @@ -672,19 +618,19 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap2420() && controller_nr == 0) { - omap_cfg_reg(H18_24XX_MMC_CMD); - omap_cfg_reg(H15_24XX_MMC_CLKI); - omap_cfg_reg(G19_24XX_MMC_CLKO); - omap_cfg_reg(F20_24XX_MMC_DAT0); - omap_cfg_reg(F19_24XX_MMC_DAT_DIR0); - omap_cfg_reg(G18_24XX_MMC_CMD_DIR); + omap_mux_init_signal("sdmmc_cmd", 0); + omap_mux_init_signal("sdmmc_clki", 0); + omap_mux_init_signal("sdmmc_clko", 0); + omap_mux_init_signal("sdmmc_dat0", 0); + omap_mux_init_signal("sdmmc_dat_dir0", 0); + omap_mux_init_signal("sdmmc_cmd_dir", 0); if (mmc_controller->slots[0].wires == 4) { - omap_cfg_reg(H14_24XX_MMC_DAT1); - omap_cfg_reg(E19_24XX_MMC_DAT2); - omap_cfg_reg(D19_24XX_MMC_DAT3); - omap_cfg_reg(E20_24XX_MMC_DAT_DIR1); - omap_cfg_reg(F18_24XX_MMC_DAT_DIR2); - omap_cfg_reg(E18_24XX_MMC_DAT_DIR3); + omap_mux_init_signal("sdmmc_dat1", 0); + omap_mux_init_signal("sdmmc_dat2", 0); + omap_mux_init_signal("sdmmc_dat3", 0); + omap_mux_init_signal("sdmmc_dat_dir1", 0); + omap_mux_init_signal("sdmmc_dat_dir2", 0); + omap_mux_init_signal("sdmmc_dat_dir3", 0); } /* diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index e57fb29ff855..722209601927 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -19,8 +19,6 @@ #include <plat/board.h> #include <plat/gpmc.h> -#define WR_RD_PIN_MONITORING 0x00600000 - static struct omap_nand_platform_data *gpmc_nand_data; static struct resource gpmc_nand_resource = { @@ -71,10 +69,10 @@ static int omap2_nand_gpmc_retime(void) t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle); /* Configure GPMC */ - gpmc_cs_write_reg(gpmc_nand_data->cs, GPMC_CS_CONFIG1, - GPMC_CONFIG1_DEVICESIZE(gpmc_nand_data->devsize) | - GPMC_CONFIG1_DEVICETYPE_NAND); - + gpmc_cs_configure(gpmc_nand_data->cs, + GPMC_CONFIG_DEV_SIZE, gpmc_nand_data->devsize); + gpmc_cs_configure(gpmc_nand_data->cs, + GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND); err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); if (err) return err; @@ -82,27 +80,13 @@ static int omap2_nand_gpmc_retime(void) return 0; } -static int gpmc_nand_setup(void) -{ - struct device *dev = &gpmc_nand_device.dev; - - /* Set timings in GPMC */ - if (omap2_nand_gpmc_retime() < 0) { - dev_err(dev, "Unable to set gpmc timings\n"); - return -EINVAL; - } - - return 0; -} - int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data) { - unsigned int val; int err = 0; struct device *dev = &gpmc_nand_device.dev; gpmc_nand_data = _nand_data; - gpmc_nand_data->nand_setup = gpmc_nand_setup; + gpmc_nand_data->nand_setup = omap2_nand_gpmc_retime; gpmc_nand_device.dev.platform_data = gpmc_nand_data; err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, @@ -112,19 +96,16 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data) return err; } - err = gpmc_nand_setup(); + /* Set timings in GPMC */ + err = omap2_nand_gpmc_retime(); if (err < 0) { - dev_err(dev, "NAND platform setup failed: %d\n", err); + dev_err(dev, "Unable to set gpmc timings: %d\n", err); return err; } /* Enable RD PIN Monitoring Reg */ if (gpmc_nand_data->dev_ready) { - val = gpmc_cs_read_reg(gpmc_nand_data->cs, - GPMC_CS_CONFIG1); - val |= WR_RD_PIN_MONITORING; - gpmc_cs_write_reg(gpmc_nand_data->cs, - GPMC_CS_CONFIG1, val); + gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1); } err = platform_device_register(&gpmc_nand_device); diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 5bc3ca03551c..f46933bc9373 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -46,8 +46,9 @@ #define GPMC_ECC_CONFIG 0x1f4 #define GPMC_ECC_CONTROL 0x1f8 #define GPMC_ECC_SIZE_CONFIG 0x1fc +#define GPMC_ECC1_RESULT 0x200 -#define GPMC_CS0 0x60 +#define GPMC_CS0_OFFSET 0x60 #define GPMC_CS_SIZE 0x30 #define GPMC_MEM_START 0x00000000 @@ -92,7 +93,8 @@ struct omap3_gpmc_regs { static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); -static unsigned gpmc_cs_map; +static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ +static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */ static void __iomem *gpmc_base; @@ -108,11 +110,27 @@ static u32 gpmc_read_reg(int idx) return __raw_readl(gpmc_base + idx); } +static void gpmc_cs_write_byte(int cs, int idx, u8 val) +{ + void __iomem *reg_addr; + + reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; + __raw_writeb(val, reg_addr); +} + +static u8 gpmc_cs_read_byte(int cs, int idx) +{ + void __iomem *reg_addr; + + reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; + return __raw_readb(reg_addr); +} + void gpmc_cs_write_reg(int cs, int idx, u32 val) { void __iomem *reg_addr; - reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx; + reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; __raw_writel(val, reg_addr); } @@ -120,7 +138,7 @@ u32 gpmc_cs_read_reg(int cs, int idx) { void __iomem *reg_addr; - reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx; + reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; return __raw_readl(reg_addr); } @@ -419,8 +437,157 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** + * gpmc_read_status - read access request to get the different gpmc status + * @cmd: command type + * @return status + */ +int gpmc_read_status(int cmd) +{ + int status = -EINVAL; + u32 regval = 0; + + switch (cmd) { + case GPMC_GET_IRQ_STATUS: + status = gpmc_read_reg(GPMC_IRQSTATUS); + break; + + case GPMC_PREFETCH_FIFO_CNT: + regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); + status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval); + break; + + case GPMC_PREFETCH_COUNT: + regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); + status = GPMC_PREFETCH_STATUS_COUNT(regval); + break; + + case GPMC_STATUS_BUFFER: + regval = gpmc_read_reg(GPMC_STATUS); + /* 1 : buffer is available to write */ + status = regval & GPMC_STATUS_BUFF_EMPTY; + break; + + default: + printk(KERN_ERR "gpmc_read_status: Not supported\n"); + } + return status; +} +EXPORT_SYMBOL(gpmc_read_status); + +/** + * gpmc_cs_configure - write request to configure gpmc + * @cs: chip select number + * @cmd: command type + * @wval: value to write + * @return status of the operation + */ +int gpmc_cs_configure(int cs, int cmd, int wval) +{ + int err = 0; + u32 regval = 0; + + switch (cmd) { + case GPMC_SET_IRQ_STATUS: + gpmc_write_reg(GPMC_IRQSTATUS, wval); + break; + + case GPMC_CONFIG_WP: + regval = gpmc_read_reg(GPMC_CONFIG); + if (wval) + regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */ + else + regval |= GPMC_CONFIG_WRITEPROTECT; /* WP is OFF */ + gpmc_write_reg(GPMC_CONFIG, regval); + break; + + case GPMC_CONFIG_RDY_BSY: + regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + if (wval) + regval |= WR_RD_PIN_MONITORING; + else + regval &= ~WR_RD_PIN_MONITORING; + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); + break; + + case GPMC_CONFIG_DEV_SIZE: + regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + regval |= GPMC_CONFIG1_DEVICESIZE(wval); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); + break; + + case GPMC_CONFIG_DEV_TYPE: + regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + regval |= GPMC_CONFIG1_DEVICETYPE(wval); + if (wval == GPMC_DEVICETYPE_NOR) + regval |= GPMC_CONFIG1_MUXADDDATA; + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); + break; + + default: + printk(KERN_ERR "gpmc_configure_cs: Not supported\n"); + err = -EINVAL; + } + + return err; +} +EXPORT_SYMBOL(gpmc_cs_configure); + +/** + * gpmc_nand_read - nand specific read access request + * @cs: chip select number + * @cmd: command type + */ +int gpmc_nand_read(int cs, int cmd) +{ + int rval = -EINVAL; + + switch (cmd) { + case GPMC_NAND_DATA: + rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA); + break; + + default: + printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n"); + } + return rval; +} +EXPORT_SYMBOL(gpmc_nand_read); + +/** + * gpmc_nand_write - nand specific write request + * @cs: chip select number + * @cmd: command type + * @wval: value to write + */ +int gpmc_nand_write(int cs, int cmd, int wval) +{ + int err = 0; + + switch (cmd) { + case GPMC_NAND_COMMAND: + gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval); + break; + + case GPMC_NAND_ADDRESS: + gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval); + break; + + case GPMC_NAND_DATA: + gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval); + + default: + printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n"); + err = -EINVAL; + } + return err; +} +EXPORT_SYMBOL(gpmc_nand_write); + + + +/** * gpmc_prefetch_enable - configures and starts prefetch transfer - * @cs: nand cs (chip select) number + * @cs: cs (chip select) number * @dma_mode: dma mode enable (1) or disable (0) * @u32_count: number of bytes to be transferred * @is_write: prefetch read(0) or write post(1) mode @@ -428,7 +595,6 @@ EXPORT_SYMBOL(gpmc_cs_free); int gpmc_prefetch_enable(int cs, int dma_mode, unsigned int u32_count, int is_write) { - uint32_t prefetch_config1; if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) { /* Set the amount of bytes to be prefetched */ @@ -437,17 +603,17 @@ int gpmc_prefetch_enable(int cs, int dma_mode, /* Set dma/mpu mode, the prefetch read / post write and * enable the engine. Set which cs is has requested for. */ - prefetch_config1 = ((cs << CS_NUM_SHIFT) | + gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) | PREFETCH_FIFOTHRESHOLD | ENABLE_PREFETCH | (dma_mode << DMA_MPU_MODE) | - (0x1 & is_write)); - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1); + (0x1 & is_write))); + + /* Start the prefetch engine */ + gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1); } else { return -EBUSY; } - /* Start the prefetch engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1); return 0; } @@ -456,24 +622,24 @@ EXPORT_SYMBOL(gpmc_prefetch_enable); /** * gpmc_prefetch_reset - disables and stops the prefetch engine */ -void gpmc_prefetch_reset(void) +int gpmc_prefetch_reset(int cs) { + u32 config1; + + /* check if the same module/cs is trying to reset */ + config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); + if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs) + return -EINVAL; + /* Stop the PFPW engine */ gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0); /* Reset/disable the PFPW engine */ gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0); -} -EXPORT_SYMBOL(gpmc_prefetch_reset); -/** - * gpmc_prefetch_status - reads prefetch status of engine - */ -int gpmc_prefetch_status(void) -{ - return gpmc_read_reg(GPMC_PREFETCH_STATUS); + return 0; } -EXPORT_SYMBOL(gpmc_prefetch_status); +EXPORT_SYMBOL(gpmc_prefetch_reset); static void __init gpmc_mem_init(void) { @@ -615,3 +781,79 @@ void omap3_gpmc_restore_context(void) } } #endif /* CONFIG_ARCH_OMAP3 */ + +/** + * gpmc_enable_hwecc - enable hardware ecc functionality + * @cs: chip select number + * @mode: read/write mode + * @dev_width: device bus width(1 for x16, 0 for x8) + * @ecc_size: bytes for which ECC will be generated + */ +int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) +{ + unsigned int val; + + /* check if ecc module is in used */ + if (gpmc_ecc_used != -EINVAL) + return -EINVAL; + + gpmc_ecc_used = cs; + + /* clear ecc and enable bits */ + val = ((0x00000001<<8) | 0x00000001); + gpmc_write_reg(GPMC_ECC_CONTROL, val); + + /* program ecc and result sizes */ + val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F)); + gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val); + + switch (mode) { + case GPMC_ECC_READ: + gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); + break; + case GPMC_ECC_READSYN: + gpmc_write_reg(GPMC_ECC_CONTROL, 0x100); + break; + case GPMC_ECC_WRITE: + gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); + break; + default: + printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode); + break; + } + + /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ + val = (dev_width << 7) | (cs << 1) | (0x1); + gpmc_write_reg(GPMC_ECC_CONFIG, val); + return 0; +} + +/** + * gpmc_calculate_ecc - generate non-inverted ecc bytes + * @cs: chip select number + * @dat: data pointer over which ecc is computed + * @ecc_code: ecc code buffer + * + * Using non-inverted ECC is considered ugly since writing a blank + * page (padding) will clear the ECC bytes. This is not a problem as long + * no one is trying to write data on the seemingly unused page. Reading + * an erased page will produce an ECC mismatch between generated and read + * ECC bytes that has to be dealt with separately. + */ +int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) +{ + unsigned int val = 0x0; + + if (gpmc_ecc_used != cs) + return -EINVAL; + + /* read ecc result */ + val = gpmc_read_reg(GPMC_ECC1_RESULT); + *ecc_code++ = val; /* P128e, ..., P1e */ + *ecc_code++ = val >> 16; /* P128o, ..., P1o */ + /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ + *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); + + gpmc_ecc_used = -EINVAL; + return 0; +} diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index 7951ae1447ee..79c478c4cb1c 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -21,32 +21,19 @@ #include <plat/cpu.h> #include <plat/i2c.h> -#include <plat/mux.h> #include "mux.h" void __init omap2_i2c_mux_pins(int bus_id) { - if (cpu_is_omap24xx()) { - const int omap24xx_pins[][2] = { - { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, - { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, - }; - int scl, sda; - - scl = omap24xx_pins[bus_id - 1][0]; - sda = omap24xx_pins[bus_id - 1][1]; - omap_cfg_reg(sda); - omap_cfg_reg(scl); - } + char mux_name[sizeof("i2c2_scl.i2c2_scl")]; /* First I2C bus is not muxable */ - if (cpu_is_omap34xx() && bus_id > 1) { - char mux_name[sizeof("i2c2_scl.i2c2_scl")]; + if (bus_id == 1) + return; - sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); - omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); - sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); - omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); - } + sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); } diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 37b8a1a4adf8..e8256a2ed8e7 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -25,6 +25,8 @@ #include <plat/control.h> #include <plat/cpu.h> +#include <mach/id.h> + static struct omap_chip_id omap_chip; static unsigned int omap_revision; @@ -102,30 +104,36 @@ static struct omap_id omap_ids[] __initdata = { static void __iomem *tap_base; static u16 tap_prod_id; -void __init omap24xx_check_revision(void) +void omap_get_die_id(struct omap_die_id *odi) +{ + odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_0); + odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_1); + odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_2); + odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3); +} + +static void __init omap24xx_check_revision(void) { int i, j; u32 idcode, prod_id; u16 hawkeye; u8 dev_type, rev; + struct omap_die_id odi; idcode = read_tap_reg(OMAP_TAP_IDCODE); prod_id = read_tap_reg(tap_prod_id); hawkeye = (idcode >> 12) & 0xffff; rev = (idcode >> 28) & 0x0f; dev_type = (prod_id >> 16) & 0x0f; + omap_get_die_id(&odi); pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n", idcode, rev, hawkeye, (idcode >> 1) & 0x7ff); - pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", - read_tap_reg(OMAP_TAP_DIE_ID_0)); + pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0); pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n", - read_tap_reg(OMAP_TAP_DIE_ID_1), - (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf); - pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", - read_tap_reg(OMAP_TAP_DIE_ID_2)); - pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", - read_tap_reg(OMAP_TAP_DIE_ID_3)); + odi.id_1, (odi.id_1 >> 28) & 0xf); + pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2); + pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3); pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n", prod_id, dev_type); @@ -164,7 +172,7 @@ void __init omap24xx_check_revision(void) omap3_features |= OMAP3_HAS_ ##feat; \ } -void __init omap3_check_features(void) +static void __init omap3_check_features(void) { u32 status; @@ -179,6 +187,8 @@ void __init omap3_check_features(void) OMAP3_CHECK_FEATURE(status, ISP); if (cpu_is_omap3630()) omap3_features |= OMAP3_HAS_192MHZ_CLK; + if (!cpu_is_omap3505() && !cpu_is_omap3517()) + omap3_features |= OMAP3_HAS_IO_WAKEUP; /* * TODO: Get additional info (where applicable) @@ -186,7 +196,7 @@ void __init omap3_check_features(void) */ } -void __init omap3_check_revision(void) +static void __init omap3_check_revision(void) { u32 cpuid, idcode; u16 hawkeye; @@ -259,15 +269,31 @@ void __init omap3_check_revision(void) omap_chip.oc |= CHIP_IS_OMAP3430ES3_1; break; case 0xb891: - /* FALLTHROUGH */ + /* Handle 36xx devices */ + omap_chip.oc |= CHIP_IS_OMAP3630ES1; + + switch(rev) { + case 0: /* Take care of early samples */ + omap_revision = OMAP3630_REV_ES1_0; + break; + case 1: + omap_revision = OMAP3630_REV_ES1_1; + omap_chip.oc |= CHIP_IS_OMAP3630ES1_1; + break; + case 2: + default: + omap_revision = OMAP3630_REV_ES1_2; + omap_chip.oc |= CHIP_IS_OMAP3630ES1_2; + break; + } default: /* Unknown default to latest silicon rev as default*/ - omap_revision = OMAP3630_REV_ES1_0; - omap_chip.oc |= CHIP_IS_OMAP3630ES1; + omap_revision = OMAP3630_REV_ES1_2; + omap_chip.oc |= CHIP_IS_OMAP3630ES1_2; } } -void __init omap4_check_revision(void) +static void __init omap4_check_revision(void) { u32 idcode; u16 hawkeye; @@ -297,7 +323,7 @@ void __init omap4_check_revision(void) if (omap3_has_ ##feat()) \ printk(#feat" "); -void __init omap3_cpuinfo(void) +static void __init omap3_cpuinfo(void) { u8 rev = GET_OMAP_REVISION(); char cpu_name[16], cpu_rev[16]; @@ -339,6 +365,12 @@ void __init omap3_cpuinfo(void) case OMAP_REVBITS_00: strcpy(cpu_rev, "1.0"); break; + case OMAP_REVBITS_01: + strcpy(cpu_rev, "1.1"); + break; + case OMAP_REVBITS_02: + strcpy(cpu_rev, "1.2"); + break; case OMAP_REVBITS_10: strcpy(cpu_rev, "2.0"); break; diff --git a/arch/arm/mach-omap2/include/mach/board-sdp.h b/arch/arm/mach-omap2/include/mach/board-flash.h index 465169c0908a..b2242ae2bb6f 100644 --- a/arch/arm/mach-omap2/include/mach/board-sdp.h +++ b/arch/arm/mach-omap2/include/mach/board-flash.h @@ -12,10 +12,17 @@ */ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <plat/gpmc.h> + +#define PDC_NOR 1 +#define PDC_NAND 2 +#define PDC_ONENAND 3 +#define DBG_MPDB 4 struct flash_partitions { struct mtd_partition *parts; int nr_parts; }; -extern void sdp_flash_init(struct flash_partitions []); +extern void board_flash_init(struct flash_partitions [], + char chip_sel[][GPMC_CS_NUM]); diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h index c93b29e21b78..3af69d2c3dcd 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h @@ -1,5 +1,11 @@ /* * Defines for zoom boards */ +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#define ZOOM_NAND_CS 0 + +extern void __init board_nand_init(struct mtd_partition *, u8 nr_parts, u8 cs); extern int __init zoom_debugboard_init(void); extern void __init zoom_peripherals_init(void); diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 35b24409a0c8..09331bbbda52 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -36,7 +36,7 @@ omap_uart_lsr: .word 0 /* Use omap_uart_phys/virt if already configured */ 10: mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - ldreq \rx, =omap_uart_phys @ physical base address + ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address ldrne \rx, =omap_uart_virt @ virtual base address ldr \rx, [\rx, #0] cmp \rx, #0 @ is port configured? @@ -89,26 +89,36 @@ omap_uart_lsr: .word 0 44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE) b 98f 95: ldr \rx, =ZOOM_UART_BASE - ldr \tmp, =omap_uart_phys + mrc p15, 0, \tmp, c1, c0 + tst \tmp, #1 @ MMU enabled? + ldreq \tmp, =__virt_to_phys(omap_uart_phys) + ldrne \tmp, =omap_uart_phys str \rx, [\tmp, #0] ldr \rx, =ZOOM_UART_VIRT - ldr \tmp, =omap_uart_virt + ldreq \tmp, =__virt_to_phys(omap_uart_virt) + ldrne \tmp, =omap_uart_virt str \rx, [\tmp, #0] mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT) - ldr \tmp, =omap_uart_lsr + ldreq \tmp, =__virt_to_phys(omap_uart_lsr) + ldrne \tmp, =omap_uart_lsr str \rx, [\tmp, #0] b 10b /* Store both phys and virt address for the uart */ 98: add \rx, \rx, #0x48000000 @ phys base - ldr \tmp, =omap_uart_phys + mrc p15, 0, \tmp, c1, c0 + tst \tmp, #1 @ MMU enabled? + ldreq \tmp, =__virt_to_phys(omap_uart_phys) + ldrne \tmp, =omap_uart_phys str \rx, [\tmp, #0] sub \rx, \rx, #0x48000000 @ phys base add \rx, \rx, #0xfa000000 @ virt base - ldr \tmp, =omap_uart_virt + ldreq \tmp, =__virt_to_phys(omap_uart_virt) + ldrne \tmp, =omap_uart_virt str \rx, [\tmp, #0] mov \rx, #(UART_LSR << OMAP_PORT_SHIFT) - ldr \tmp, =omap_uart_lsr + ldreq \tmp, =__virt_to_phys(omap_uart_lsr) + ldrne \tmp, =omap_uart_lsr str \rx, [\tmp, #0] b 10b @@ -120,7 +130,10 @@ omap_uart_lsr: .word 0 .endm .macro busyuart,rd,rx -1001: ldr \rd, =omap_uart_lsr +1001: mrc p15, 0, \rd, c1, c0 + tst \rd, #1 @ MMU enabled? + ldreq \rd, =__virt_to_phys(omap_uart_lsr) + ldrne \rd, =omap_uart_lsr ldr \rd, [\rd, #0] ldrb \rd, [\rx, \rd] and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) diff --git a/arch/arm/mach-omap2/include/mach/id.h b/arch/arm/mach-omap2/include/mach/id.h new file mode 100644 index 000000000000..02ed3aa56f1e --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/id.h @@ -0,0 +1,22 @@ +/* + * OMAP2 CPU identification code + * + * Copyright (C) 2010 Kan-Ru Chen <kanru@0xlab.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef OMAP2_ARCH_ID_H +#define OMAP2_ARCH_ID_H + +struct omap_die_id { + u32 id_0; + u32 id_1; + u32 id_2; + u32 id_3; +}; + +void omap_get_die_id(struct omap_die_id *odi); + +#endif diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h index 423af3a6dd31..2744dfee1ff4 100644 --- a/arch/arm/mach-omap2/include/mach/omap4-common.h +++ b/arch/arm/mach-omap2/include/mach/omap4-common.h @@ -13,6 +13,13 @@ #ifndef OMAP_ARCH_OMAP4_COMMON_H #define OMAP_ARCH_OMAP4_COMMON_H +/* + * wfi used in low power code. Directly opcode is used instead + * of instruction to avoid mulit-omap build break + */ +#define do_wfi() \ + __asm__ __volatile__ (".word 0xe320f003" : : : "memory") + #ifdef CONFIG_CACHE_L2X0 extern void __iomem *l2cache_base; #endif diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4e1f53d0b880..b9ea70bce563 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -28,7 +28,6 @@ #include <asm/mach/map.h> -#include <plat/mux.h> #include <plat/sram.h> #include <plat/sdrc.h> #include <plat/gpmc.h> @@ -44,6 +43,7 @@ #include <plat/clockdomain.h> #include "clockdomains.h" + #include <plat/omap_hwmod.h> /* @@ -313,6 +313,8 @@ static int __init _omap2_init_reprogram_sdrc(void) void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) { + u8 skip_setup_idle = 0; + pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_autodeps); if (cpu_is_omap242x()) @@ -321,7 +323,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, omap2430_hwmod_init(); else if (cpu_is_omap34xx()) omap3xxx_hwmod_init(); - omap2_mux_init(); /* The OPP tables have to be registered before a clk init */ omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps); @@ -337,9 +338,13 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, pr_err("Could not init clock framework - unknown CPU\n"); omap_serial_early_init(); + +#ifndef CONFIG_PM_RUNTIME + skip_setup_idle = 1; +#endif if (cpu_is_omap24xx() || cpu_is_omap34xx()) /* FIXME: OMAP4 */ - omap_hwmod_late_init(); - omap_pm_if_init(); + omap_hwmod_late_init(skip_setup_idle); + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index e82da680d908..14ee686b6492 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -44,9 +44,13 @@ #define MMU_IRQ_EMUMISS (1 << 2) #define MMU_IRQ_TRANSLATIONFAULT (1 << 1) #define MMU_IRQ_TLBMISS (1 << 0) -#define MMU_IRQ_MASK \ - (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \ - MMU_IRQ_TRANSLATIONFAULT) + +#define __MMU_IRQ_FAULT \ + (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT) +#define MMU_IRQ_MASK \ + (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS) +#define MMU_IRQ_TWL_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT) +#define MMU_IRQ_TLB_MISS_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS) /* MMU_CNTL */ #define MMU_CNTL_SHIFT 1 @@ -61,6 +65,26 @@ ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \ ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0) + +static void __iommu_set_twl(struct iommu *obj, bool on) +{ + u32 l = iommu_read_reg(obj, MMU_CNTL); + + if (on) + iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE); + else + iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE); + + l &= ~MMU_CNTL_MASK; + if (on) + l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN); + else + l |= (MMU_CNTL_MMU_EN); + + iommu_write_reg(obj, l, MMU_CNTL); +} + + static int omap2_iommu_enable(struct iommu *obj) { u32 l, pa; @@ -96,13 +120,9 @@ static int omap2_iommu_enable(struct iommu *obj) l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE); iommu_write_reg(obj, l, MMU_SYSCONFIG); - iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE); iommu_write_reg(obj, pa, MMU_TTB); - l = iommu_read_reg(obj, MMU_CNTL); - l &= ~MMU_CNTL_MASK; - l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN); - iommu_write_reg(obj, l, MMU_CNTL); + __iommu_set_twl(obj, true); return 0; } @@ -118,6 +138,11 @@ static void omap2_iommu_disable(struct iommu *obj) dev_dbg(obj->dev, "%s is shutting down\n", obj->name); } +static void omap2_iommu_set_twl(struct iommu *obj, bool on) +{ + __iommu_set_twl(obj, false); +} + static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) { int i; @@ -147,7 +172,7 @@ static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) printk("\n"); iommu_write_reg(obj, stat, MMU_IRQSTATUS); - omap2_iommu_disable(obj); + return stat; } @@ -300,6 +325,7 @@ static const struct iommu_functions omap2_iommu_ops = { .enable = omap2_iommu_enable, .disable = omap2_iommu_disable, + .set_twl = omap2_iommu_set_twl, .fault_isr = omap2_iommu_fault_isr, .tlb_read_cr = omap2_tlb_read_cr, diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 318f3638653c..42dbfa46e656 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -10,7 +10,6 @@ * for more details. */ -#include <linux/kernel.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/platform_device.h> @@ -18,8 +17,6 @@ #include <plat/mailbox.h> #include <mach/irqs.h> -#define DRV_NAME "omap2-mailbox" - #define MAILBOX_REVISION 0x000 #define MAILBOX_SYSCONFIG 0x010 #define MAILBOX_SYSSTATUS 0x014 @@ -131,7 +128,7 @@ static int omap2_mbox_startup(struct omap_mbox *mbox) } l = mbox_read_reg(MAILBOX_REVISION); - pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); + pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f)); if (cpu_is_omap44xx()) l = OMAP4_SMARTIDLE; @@ -283,6 +280,8 @@ static struct omap_mbox_ops omap2_mbox_ops = { */ /* FIXME: the following structs should be filled automatically by the user id */ + +#if defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_ARCH_OMAP2420) /* DSP */ static struct omap_mbox2_priv omap2_mbox_dsp_priv = { .tx_fifo = { @@ -300,10 +299,46 @@ static struct omap_mbox2_priv omap2_mbox_dsp_priv = { .irqdisable = MAILBOX_IRQENABLE(0), }; +struct omap_mbox mbox_dsp_info = { + .name = "dsp", + .ops = &omap2_mbox_ops, + .priv = &omap2_mbox_dsp_priv, +}; +#endif + +#if defined(CONFIG_ARCH_OMAP3430) +struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL }; +#endif + +#if defined(CONFIG_ARCH_OMAP2420) +/* IVA */ +static struct omap_mbox2_priv omap2_mbox_iva_priv = { + .tx_fifo = { + .msg = MAILBOX_MESSAGE(2), + .fifo_stat = MAILBOX_FIFOSTATUS(2), + }, + .rx_fifo = { + .msg = MAILBOX_MESSAGE(3), + .msg_stat = MAILBOX_MSGSTATUS(3), + }, + .irqenable = MAILBOX_IRQENABLE(3), + .irqstatus = MAILBOX_IRQSTATUS(3), + .notfull_bit = MAILBOX_IRQ_NOTFULL(2), + .newmsg_bit = MAILBOX_IRQ_NEWMSG(3), + .irqdisable = MAILBOX_IRQENABLE(3), +}; + +static struct omap_mbox mbox_iva_info = { + .name = "iva", + .ops = &omap2_mbox_ops, + .priv = &omap2_mbox_iva_priv, +}; +struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL }; +#endif -/* OMAP4 specific data structure. Use the cpu_is_omap4xxx() -to use this*/ +#if defined(CONFIG_ARCH_OMAP4) +/* OMAP4 */ static struct omap_mbox2_priv omap2_mbox_1_priv = { .tx_fifo = { .msg = MAILBOX_MESSAGE(0), @@ -325,14 +360,6 @@ struct omap_mbox mbox_1_info = { .ops = &omap2_mbox_ops, .priv = &omap2_mbox_1_priv, }; -EXPORT_SYMBOL(mbox_1_info); - -struct omap_mbox mbox_dsp_info = { - .name = "dsp", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_dsp_priv, -}; -EXPORT_SYMBOL(mbox_dsp_info); static struct omap_mbox2_priv omap2_mbox_2_priv = { .tx_fifo = { @@ -355,110 +382,64 @@ struct omap_mbox mbox_2_info = { .ops = &omap2_mbox_ops, .priv = &omap2_mbox_2_priv, }; -EXPORT_SYMBOL(mbox_2_info); - - -#if defined(CONFIG_ARCH_OMAP2420) /* IVA */ -static struct omap_mbox2_priv omap2_mbox_iva_priv = { - .tx_fifo = { - .msg = MAILBOX_MESSAGE(2), - .fifo_stat = MAILBOX_FIFOSTATUS(2), - }, - .rx_fifo = { - .msg = MAILBOX_MESSAGE(3), - .msg_stat = MAILBOX_MSGSTATUS(3), - }, - .irqenable = MAILBOX_IRQENABLE(3), - .irqstatus = MAILBOX_IRQSTATUS(3), - .notfull_bit = MAILBOX_IRQ_NOTFULL(2), - .newmsg_bit = MAILBOX_IRQ_NEWMSG(3), - .irqdisable = MAILBOX_IRQENABLE(3), -}; -static struct omap_mbox mbox_iva_info = { - .name = "iva", - .ops = &omap2_mbox_ops, - .priv = &omap2_mbox_iva_priv, -}; +struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL }; #endif static int __devinit omap2_mbox_probe(struct platform_device *pdev) { - struct resource *res; + struct resource *mem; int ret; + struct omap_mbox **list; - /* MBOX base */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!res)) { - dev_err(&pdev->dev, "invalid mem resource\n"); - return -ENODEV; + if (false) + ; +#if defined(CONFIG_ARCH_OMAP3430) + else if (cpu_is_omap3430()) { + list = omap3_mboxes; + + list[0]->irq = platform_get_irq_byname(pdev, "dsp"); } - mbox_base = ioremap(res->start, resource_size(res)); - if (!mbox_base) - return -ENOMEM; +#endif +#if defined(CONFIG_ARCH_OMAP2420) + else if (cpu_is_omap2420()) { + list = omap2_mboxes; - /* DSP or IVA2 IRQ */ - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + list[0]->irq = platform_get_irq_byname(pdev, "dsp"); + list[1]->irq = platform_get_irq_byname(pdev, "iva"); + } +#endif +#if defined(CONFIG_ARCH_OMAP4) + else if (cpu_is_omap44xx()) { + list = omap4_mboxes; - if (unlikely(!res)) { - dev_err(&pdev->dev, "invalid irq resource\n"); - ret = -ENODEV; - goto err_dsp; + list[0]->irq = list[1]->irq = + platform_get_irq_byname(pdev, "mbox"); } - if (cpu_is_omap44xx()) { - mbox_1_info.irq = res->start; - ret = omap_mbox_register(&pdev->dev, &mbox_1_info); - } else { - mbox_dsp_info.irq = res->start; - ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info); +#endif + else { + pr_err("%s: platform not supported\n", __func__); + return -ENODEV; } - if (ret) - goto err_dsp; - if (cpu_is_omap44xx()) { - mbox_2_info.irq = res->start; - ret = omap_mbox_register(&pdev->dev, &mbox_2_info); - if (ret) { - omap_mbox_unregister(&mbox_1_info); - goto err_dsp; - } - } -#if defined(CONFIG_ARCH_OMAP2420) /* IVA */ - if (cpu_is_omap2420()) { - /* IVA IRQ */ - res = platform_get_resource(pdev, IORESOURCE_IRQ, 1); - if (unlikely(!res)) { - dev_err(&pdev->dev, "invalid irq resource\n"); - ret = -ENODEV; - omap_mbox_unregister(&mbox_dsp_info); - goto err_dsp; - } - mbox_iva_info.irq = res->start; - ret = omap_mbox_register(&pdev->dev, &mbox_iva_info); - if (ret) { - omap_mbox_unregister(&mbox_dsp_info); - goto err_dsp; - } + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mbox_base = ioremap(mem->start, resource_size(mem)); + if (!mbox_base) + return -ENOMEM; + + ret = omap_mbox_register(&pdev->dev, list); + if (ret) { + iounmap(mbox_base); + return ret; } -#endif return 0; -err_dsp: - iounmap(mbox_base); return ret; } static int __devexit omap2_mbox_remove(struct platform_device *pdev) { -#if defined(CONFIG_ARCH_OMAP2420) - omap_mbox_unregister(&mbox_iva_info); -#endif - - if (cpu_is_omap44xx()) { - omap_mbox_unregister(&mbox_2_info); - omap_mbox_unregister(&mbox_1_info); - } else - omap_mbox_unregister(&mbox_dsp_info); + omap_mbox_unregister(); iounmap(mbox_base); return 0; } @@ -467,7 +448,7 @@ static struct platform_driver omap2_mbox_driver = { .probe = omap2_mbox_probe, .remove = __devexit_p(omap2_mbox_remove), .driver = { - .name = DRV_NAME, + .name = "omap-mailbox", }, }; @@ -486,5 +467,6 @@ module_exit(omap2_mbox_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions"); -MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt"); -MODULE_ALIAS("platform:"DRV_NAME); +MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>"); +MODULE_AUTHOR("Paul Mundt"); +MODULE_ALIAS("platform:omap2-mailbox"); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index c29337074ad3..467aae245781 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -20,17 +20,18 @@ #include <mach/irqs.h> #include <plat/dma.h> -#include <plat/mux.h> #include <plat/cpu.h> #include <plat/mcbsp.h> +#include "mux.h" + static void omap2_mcbsp2_mux_setup(void) { - omap_cfg_reg(Y15_24XX_MCBSP2_CLKX); - omap_cfg_reg(R14_24XX_MCBSP2_FSX); - omap_cfg_reg(W15_24XX_MCBSP2_DR); - omap_cfg_reg(V15_24XX_MCBSP2_DX); - omap_cfg_reg(V14_24XX_GPIO117); + omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA); + omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA); + omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA); + omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA); + omap_mux_init_gpio(117, OMAP_PULL_ENA); /* * TODO: Need to add MUX settings for OMAP 2430 SDP */ @@ -133,7 +134,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .buffer_size = 0x6F, + .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { .phys_base = OMAP34XX_MCBSP2_BASE, @@ -143,7 +144,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, - .buffer_size = 0x3FF, + .buffer_size = 0x500, /* The FIFO has 1024 + 256 locations */ }, { .phys_base = OMAP34XX_MCBSP3_BASE, @@ -153,7 +154,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .buffer_size = 0x6F, + .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { .phys_base = OMAP34XX_MCBSP4_BASE, @@ -162,7 +163,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .buffer_size = 0x6F, + .buffer_size = 0x80, /* The FIFO has 128 locations */ }, { .phys_base = OMAP34XX_MCBSP5_BASE, @@ -171,7 +172,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .buffer_size = 0x6F, + .buffer_size = 0x80, /* The FIFO has 128 locations */ }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 8b3d26935a39..ab403b2ed26b 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -37,12 +37,12 @@ #include <asm/system.h> #include <plat/control.h> -#include <plat/mux.h> #include "mux.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ #define OMAP_MUX_BASE_SZ 0x5ca +#define MUXABLE_GPIO_MODE3 BIT(0) struct omap_mux_entry { struct omap_mux mux; @@ -51,6 +51,7 @@ struct omap_mux_entry { static unsigned long mux_phys; static void __iomem *mux_base; +static u8 omap_mux_flags; u16 omap_mux_read(u16 reg) { @@ -76,301 +77,6 @@ void omap_mux_write_array(struct omap_board_mux *board_mux) } } -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX) - -static struct omap_mux_cfg arch_mux_cfg; - -/* NOTE: See mux.h for the enumeration */ - -static struct pin_config __initdata_or_module omap24xx_pins[] = { -/* - * description mux mux pull pull debug - * offset mode ena type - */ - -/* 24xx I2C */ -MUX_CFG_24XX("M19_24XX_I2C1_SCL", 0x111, 0, 0, 0, 1) -MUX_CFG_24XX("L15_24XX_I2C1_SDA", 0x112, 0, 0, 0, 1) -MUX_CFG_24XX("J15_24XX_I2C2_SCL", 0x113, 0, 0, 1, 1) -MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1) - -/* Menelaus interrupt */ -MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1) - -/* 24xx clocks */ -MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1) - -/* 24xx GPMC chipselects, wait pin monitoring */ -MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1) -MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1) -MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1) -MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1) -MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1) -MUX_CFG_24XX("P1_GPMC_WAIT3", 0x09d, 0, 1, 1, 1) - -/* 24xx McBSP */ -MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX", 0x124, 1, 1, 0, 1) -MUX_CFG_24XX("R14_24XX_MCBSP2_FSX", 0x125, 1, 1, 0, 1) -MUX_CFG_24XX("W15_24XX_MCBSP2_DR", 0x126, 1, 1, 0, 1) -MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1) - -/* 24xx GPIO */ -MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1) -MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1) -MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1) -MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1) -MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1) -MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1) -MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1) -MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1) -MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1) -MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1) -MUX_CFG_24XX("N15_24XX_GPIO85", 0x103, 3, 0, 0, 1) -MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1) -MUX_CFG_24XX("P20_24XX_GPIO93", 0x10b, 3, 0, 0, 1) -MUX_CFG_24XX("P18_24XX_GPIO95", 0x10d, 3, 0, 0, 1) -MUX_CFG_24XX("M18_24XX_GPIO96", 0x10e, 3, 0, 0, 1) -MUX_CFG_24XX("L14_24XX_GPIO97", 0x10f, 3, 0, 0, 1) -MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1) -MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1) -MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1) - -/* 242x DBG GPIO */ -MUX_CFG_24XX("V4_242X_GPIO49", 0xd3, 3, 0, 0, 1) -MUX_CFG_24XX("W2_242X_GPIO50", 0xd4, 3, 0, 0, 1) -MUX_CFG_24XX("U4_242X_GPIO51", 0xd5, 3, 0, 0, 1) -MUX_CFG_24XX("V3_242X_GPIO52", 0xd6, 3, 0, 0, 1) -MUX_CFG_24XX("V2_242X_GPIO53", 0xd7, 3, 0, 0, 1) -MUX_CFG_24XX("V6_242X_GPIO53", 0xcf, 3, 0, 0, 1) -MUX_CFG_24XX("T4_242X_GPIO54", 0xd8, 3, 0, 0, 1) -MUX_CFG_24XX("Y4_242X_GPIO54", 0xd0, 3, 0, 0, 1) -MUX_CFG_24XX("T3_242X_GPIO55", 0xd9, 3, 0, 0, 1) -MUX_CFG_24XX("U2_242X_GPIO56", 0xda, 3, 0, 0, 1) - -/* 24xx external DMA requests */ -MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1) -MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1) -MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1) -MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1) -MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1) -MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1) - -/* UART3 */ -MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1) -MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1) - -/* MMC/SDIO */ -MUX_CFG_24XX("G19_24XX_MMC_CLKO", 0x0f3, 0, 0, 0, 1) -MUX_CFG_24XX("H18_24XX_MMC_CMD", 0x0f4, 0, 0, 0, 1) -MUX_CFG_24XX("F20_24XX_MMC_DAT0", 0x0f5, 0, 0, 0, 1) -MUX_CFG_24XX("H14_24XX_MMC_DAT1", 0x0f6, 0, 0, 0, 1) -MUX_CFG_24XX("E19_24XX_MMC_DAT2", 0x0f7, 0, 0, 0, 1) -MUX_CFG_24XX("D19_24XX_MMC_DAT3", 0x0f8, 0, 0, 0, 1) -MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0", 0x0f9, 0, 0, 0, 1) -MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1", 0x0fa, 0, 0, 0, 1) -MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2", 0x0fb, 0, 0, 0, 1) -MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3", 0x0fc, 0, 0, 0, 1) -MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1) -MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1) - -/* Full speed USB */ -MUX_CFG_24XX("J20_24XX_USB0_PUEN", 0x11d, 0, 0, 0, 1) -MUX_CFG_24XX("J19_24XX_USB0_VP", 0x11e, 0, 0, 0, 1) -MUX_CFG_24XX("K20_24XX_USB0_VM", 0x11f, 0, 0, 0, 1) -MUX_CFG_24XX("J18_24XX_USB0_RCV", 0x120, 0, 0, 0, 1) -MUX_CFG_24XX("K19_24XX_USB0_TXEN", 0x121, 0, 0, 0, 1) -MUX_CFG_24XX("J14_24XX_USB0_SE0", 0x122, 0, 0, 0, 1) -MUX_CFG_24XX("K18_24XX_USB0_DAT", 0x123, 0, 0, 0, 1) - -MUX_CFG_24XX("N14_24XX_USB1_SE0", 0x0ed, 2, 0, 0, 1) -MUX_CFG_24XX("W12_24XX_USB1_SE0", 0x0dd, 3, 0, 0, 1) -MUX_CFG_24XX("P15_24XX_USB1_DAT", 0x0ee, 2, 0, 0, 1) -MUX_CFG_24XX("R13_24XX_USB1_DAT", 0x0e0, 3, 0, 0, 1) -MUX_CFG_24XX("W20_24XX_USB1_TXEN", 0x0ec, 2, 0, 0, 1) -MUX_CFG_24XX("P13_24XX_USB1_TXEN", 0x0df, 3, 0, 0, 1) -MUX_CFG_24XX("V19_24XX_USB1_RCV", 0x0eb, 2, 0, 0, 1) -MUX_CFG_24XX("V12_24XX_USB1_RCV", 0x0de, 3, 0, 0, 1) - -MUX_CFG_24XX("AA10_24XX_USB2_SE0", 0x0e5, 2, 0, 0, 1) -MUX_CFG_24XX("Y11_24XX_USB2_DAT", 0x0e8, 2, 0, 0, 1) -MUX_CFG_24XX("AA12_24XX_USB2_TXEN", 0x0e9, 2, 0, 0, 1) -MUX_CFG_24XX("AA6_24XX_USB2_RCV", 0x0e6, 2, 0, 0, 1) -MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0", 0x0e7, 2, 0, 0, 1) - -/* Keypad GPIO*/ -MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1) -MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1) -MUX_CFG_24XX("V18_24XX_KBR2", 0x139, 3, 1, 1, 1) -MUX_CFG_24XX("M21_24XX_KBR3", 0xc9, 3, 1, 1, 1) -MUX_CFG_24XX("E5__24XX_KBR4", 0x138, 3, 1, 1, 1) -MUX_CFG_24XX("M18_24XX_KBR5", 0x10e, 3, 1, 1, 1) -MUX_CFG_24XX("R20_24XX_KBC0", 0x108, 3, 0, 0, 1) -MUX_CFG_24XX("M14_24XX_KBC1", 0x109, 3, 0, 0, 1) -MUX_CFG_24XX("H19_24XX_KBC2", 0x114, 3, 0, 0, 1) -MUX_CFG_24XX("V17_24XX_KBC3", 0x135, 3, 0, 0, 1) -MUX_CFG_24XX("P21_24XX_KBC4", 0xca, 3, 0, 0, 1) -MUX_CFG_24XX("L14_24XX_KBC5", 0x10f, 3, 0, 0, 1) -MUX_CFG_24XX("N19_24XX_KBC6", 0x110, 3, 0, 0, 1) - -/* 24xx Menelaus Keypad GPIO */ -MUX_CFG_24XX("B3__24XX_KBR5", 0x30, 3, 1, 1, 1) -MUX_CFG_24XX("AA4_24XX_KBC2", 0xe7, 3, 0, 0, 1) -MUX_CFG_24XX("B13_24XX_KBC6", 0x110, 3, 0, 0, 1) - -/* 2430 USB */ -MUX_CFG_24XX("AD9_2430_USB0_PUEN", 0x133, 4, 0, 0, 1) -MUX_CFG_24XX("Y11_2430_USB0_VP", 0x134, 4, 0, 0, 1) -MUX_CFG_24XX("AD7_2430_USB0_VM", 0x135, 4, 0, 0, 1) -MUX_CFG_24XX("AE7_2430_USB0_RCV", 0x136, 4, 0, 0, 1) -MUX_CFG_24XX("AD4_2430_USB0_TXEN", 0x137, 4, 0, 0, 1) -MUX_CFG_24XX("AF9_2430_USB0_SE0", 0x138, 4, 0, 0, 1) -MUX_CFG_24XX("AE6_2430_USB0_DAT", 0x139, 4, 0, 0, 1) -MUX_CFG_24XX("AD24_2430_USB1_SE0", 0x107, 2, 0, 0, 1) -MUX_CFG_24XX("AB24_2430_USB1_RCV", 0x108, 2, 0, 0, 1) -MUX_CFG_24XX("Y25_2430_USB1_TXEN", 0x109, 2, 0, 0, 1) -MUX_CFG_24XX("AA26_2430_USB1_DAT", 0x10A, 2, 0, 0, 1) - -/* 2430 HS-USB */ -MUX_CFG_24XX("AD9_2430_USB0HS_DATA3", 0x133, 0, 0, 0, 1) -MUX_CFG_24XX("Y11_2430_USB0HS_DATA4", 0x134, 0, 0, 0, 1) -MUX_CFG_24XX("AD7_2430_USB0HS_DATA5", 0x135, 0, 0, 0, 1) -MUX_CFG_24XX("AE7_2430_USB0HS_DATA6", 0x136, 0, 0, 0, 1) -MUX_CFG_24XX("AD4_2430_USB0HS_DATA2", 0x137, 0, 0, 0, 1) -MUX_CFG_24XX("AF9_2430_USB0HS_DATA0", 0x138, 0, 0, 0, 1) -MUX_CFG_24XX("AE6_2430_USB0HS_DATA1", 0x139, 0, 0, 0, 1) -MUX_CFG_24XX("AE8_2430_USB0HS_CLK", 0x13A, 0, 0, 0, 1) -MUX_CFG_24XX("AD8_2430_USB0HS_DIR", 0x13B, 0, 0, 0, 1) -MUX_CFG_24XX("AE5_2430_USB0HS_STP", 0x13c, 0, 1, 1, 1) -MUX_CFG_24XX("AE9_2430_USB0HS_NXT", 0x13D, 0, 0, 0, 1) -MUX_CFG_24XX("AC7_2430_USB0HS_DATA7", 0x13E, 0, 0, 0, 1) - -/* 2430 McBSP */ -MUX_CFG_24XX("AD6_2430_MCBSP_CLKS", 0x011E, 0, 0, 0, 1) - -MUX_CFG_24XX("AB2_2430_MCBSP1_CLKR", 0x011A, 0, 0, 0, 1) -MUX_CFG_24XX("AD5_2430_MCBSP1_FSR", 0x011B, 0, 0, 0, 1) -MUX_CFG_24XX("AA1_2430_MCBSP1_DX", 0x011C, 0, 0, 0, 1) -MUX_CFG_24XX("AF3_2430_MCBSP1_DR", 0x011D, 0, 0, 0, 1) -MUX_CFG_24XX("AB3_2430_MCBSP1_FSX", 0x011F, 0, 0, 0, 1) -MUX_CFG_24XX("Y9_2430_MCBSP1_CLKX", 0x0120, 0, 0, 0, 1) - -MUX_CFG_24XX("AC10_2430_MCBSP2_FSX", 0x012E, 1, 0, 0, 1) -MUX_CFG_24XX("AD16_2430_MCBSP2_CLX", 0x012F, 1, 0, 0, 1) -MUX_CFG_24XX("AE13_2430_MCBSP2_DX", 0x0130, 1, 0, 0, 1) -MUX_CFG_24XX("AD13_2430_MCBSP2_DR", 0x0131, 1, 0, 0, 1) -MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E, 0, 0, 0, 1) -MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F, 0, 0, 0, 1) -MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF", 0x0130, 0, 0, 0, 1) -MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF", 0x0131, 0, 0, 0, 1) - -MUX_CFG_24XX("AC9_2430_MCBSP3_CLKX", 0x0103, 0, 0, 0, 1) -MUX_CFG_24XX("AE4_2430_MCBSP3_FSX", 0x0104, 0, 0, 0, 1) -MUX_CFG_24XX("AE2_2430_MCBSP3_DR", 0x0105, 0, 0, 0, 1) -MUX_CFG_24XX("AF4_2430_MCBSP3_DX", 0x0106, 0, 0, 0, 1) - -MUX_CFG_24XX("N3_2430_MCBSP4_CLKX", 0x010B, 1, 0, 0, 1) -MUX_CFG_24XX("AD23_2430_MCBSP4_DR", 0x010C, 1, 0, 0, 1) -MUX_CFG_24XX("AB25_2430_MCBSP4_DX", 0x010D, 1, 0, 0, 1) -MUX_CFG_24XX("AC25_2430_MCBSP4_FSX", 0x010E, 1, 0, 0, 1) - -MUX_CFG_24XX("AE16_2430_MCBSP5_CLKX", 0x00ED, 1, 0, 0, 1) -MUX_CFG_24XX("AF12_2430_MCBSP5_FSX", 0x00ED, 1, 0, 0, 1) -MUX_CFG_24XX("K7_2430_MCBSP5_DX", 0x00EF, 1, 0, 0, 1) -MUX_CFG_24XX("M1_2430_MCBSP5_DR", 0x00F0, 1, 0, 0, 1) - -/* 2430 MCSPI1 */ -MUX_CFG_24XX("Y18_2430_MCSPI1_CLK", 0x010F, 0, 0, 0, 1) -MUX_CFG_24XX("AD15_2430_MCSPI1_SIMO", 0x0110, 0, 0, 0, 1) -MUX_CFG_24XX("AE17_2430_MCSPI1_SOMI", 0x0111, 0, 0, 0, 1) -MUX_CFG_24XX("U1_2430_MCSPI1_CS0", 0x0112, 0, 0, 0, 1) - -/* Touchscreen GPIO */ -MUX_CFG_24XX("AF19_2430_GPIO_85", 0x0113, 3, 0, 0, 1) - -}; - -#define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins) - -#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) - -static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg) -{ - u16 orig; - u8 warn = 0, debug = 0; - - orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET); - -#ifdef CONFIG_OMAP_MUX_DEBUG - debug = cfg->debug; -#endif - warn = (orig != reg); - if (debug || warn) - printk(KERN_WARNING - "MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n", - cfg->name, omap_ctrl_base_get() + cfg->mux_reg, - orig, reg); -} -#else -#define omap2_cfg_debug(x, y) do {} while (0) -#endif - -static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) -{ - static DEFINE_SPINLOCK(mux_spin_lock); - unsigned long flags; - u8 reg = 0; - - spin_lock_irqsave(&mux_spin_lock, flags); - reg |= cfg->mask & 0x7; - if (cfg->pull_val) - reg |= OMAP2_PULL_ENA; - if (cfg->pu_pd_val) - reg |= OMAP2_PULL_UP; - omap2_cfg_debug(cfg, reg); - omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET); - spin_unlock_irqrestore(&mux_spin_lock, flags); - - return 0; -} - -int __init omap2_mux_init(void) -{ - u32 mux_pbase; - - if (cpu_is_omap2420()) - mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET; - else if (cpu_is_omap2430()) - mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET; - else - return -ENODEV; - - mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ); - if (!mux_base) { - printk(KERN_ERR "mux: Could not ioremap\n"); - return -ENODEV; - } - - if (cpu_is_omap24xx()) { - arch_mux_cfg.pins = omap24xx_pins; - arch_mux_cfg.size = OMAP24XX_PINS_SZ; - arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; - - return omap_mux_register(&arch_mux_cfg); - } - - return 0; -} - -#else -int __init omap2_mux_init(void) -{ - return 0; -} -#endif /* CONFIG_OMAP_MUX */ - -/*----------------------------------------------------------------------------*/ - -#ifdef CONFIG_ARCH_OMAP3 static LIST_HEAD(muxmodes); static DEFINE_MUTEX(muxmode_mutex); @@ -381,6 +87,9 @@ static char *omap_mux_options; int __init omap_mux_init_gpio(int gpio, int val) { struct omap_mux_entry *e; + struct omap_mux *gpio_mux; + u16 old_mode; + u16 mux_mode; int found = 0; if (!gpio) @@ -389,31 +98,33 @@ int __init omap_mux_init_gpio(int gpio, int val) list_for_each_entry(e, &muxmodes, node) { struct omap_mux *m = &e->mux; if (gpio == m->gpio) { - u16 old_mode; - u16 mux_mode; - - old_mode = omap_mux_read(m->reg_offset); - mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); - mux_mode |= OMAP_MUX_MODE4; - printk(KERN_DEBUG "mux: Setting signal " - "%s.gpio%i 0x%04x -> 0x%04x\n", - m->muxnames[0], gpio, old_mode, mux_mode); - omap_mux_write(mux_mode, m->reg_offset); + gpio_mux = m; found++; } } - if (found == 1) - return 0; + if (found == 0) { + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + return -ENODEV; + } if (found > 1) { - printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio); + printk(KERN_INFO "mux: Multiple gpio paths (%d) for gpio%i\n", + found, gpio); return -EINVAL; } - printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + old_mode = omap_mux_read(gpio_mux->reg_offset); + mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); + if (omap_mux_flags & MUXABLE_GPIO_MODE3) + mux_mode |= OMAP_MUX_MODE3; + else + mux_mode |= OMAP_MUX_MODE4; + printk(KERN_DEBUG "mux: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", + gpio_mux->muxnames[0], gpio, old_mode, mux_mode); + omap_mux_write(mux_mode, gpio_mux->reg_offset); - return -ENODEV; + return 0; } int __init omap_mux_init_signal(char *muxname, int val) @@ -1032,6 +743,9 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size, return -ENODEV; } + if (cpu_is_omap24xx()) + omap_mux_flags = MUXABLE_GPIO_MODE3; + omap_mux_init_package(superset, package_subset, package_balls); omap_mux_init_list(superset); omap_mux_init_signals(board_mux); @@ -1039,5 +753,3 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size, return 0; } -#endif /* CONFIG_ARCH_OMAP3 */ - diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 480abc56e605..a8e040c2c7e9 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -7,6 +7,8 @@ * published by the Free Software Foundation. */ +#include "mux2420.h" +#include "mux2430.h" #include "mux34xx.h" #define OMAP_MUX_TERMINATOR 0xffff @@ -56,10 +58,12 @@ /* Flags for omap_mux_init */ #define OMAP_PACKAGE_MASK 0xffff -#define OMAP_PACKAGE_CBP 4 /* 515-pin 0.40 0.50 */ -#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */ -#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */ -#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */ +#define OMAP_PACKAGE_CBP 6 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CUS 5 /* 423-pin 0.65 */ +#define OMAP_PACKAGE_CBB 4 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CBC 3 /* 515-pin 0.50 0.65 */ +#define OMAP_PACKAGE_ZAC 2 /* 24xx 447-pin POP */ +#define OMAP_PACKAGE_ZAF 1 /* 2420 447-pin SIP */ #define OMAP_MUX_NR_MODES 8 /* Available modes */ @@ -102,7 +106,7 @@ struct omap_board_mux { u16 value; }; -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_OMAP_MUX) /** * omap_mux_init_gpio - initialize a signal based on the GPIO number @@ -171,6 +175,20 @@ void omap_mux_write(u16 val, u16 mux_offset); void omap_mux_write_array(struct omap_board_mux *board_mux); /** + * omap2420_mux_init() - initialize mux system with board specific set + * @board_mux: Board specific mux table + * @flags: OMAP package type used for the board + */ +int omap2420_mux_init(struct omap_board_mux *board_mux, int flags); + +/** + * omap2430_mux_init() - initialize mux system with board specific set + * @board_mux: Board specific mux table + * @flags: OMAP package type used for the board + */ +int omap2430_mux_init(struct omap_board_mux *board_mux, int flags); + +/** * omap3_mux_init() - initialize mux system with board specific set * @board_mux: Board specific mux table * @flags: OMAP package type used for the board diff --git a/arch/arm/mach-omap2/mux2420.c b/arch/arm/mach-omap2/mux2420.c new file mode 100644 index 000000000000..fdb04a7eb8aa --- /dev/null +++ b/arch/arm/mach-omap2/mux2420.c @@ -0,0 +1,688 @@ +/* + * Copyright (C) 2010 Nokia + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> + +#include "mux.h" + +#ifdef CONFIG_OMAP_MUX + +#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ + .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \ +} + +#else + +#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ +} + +#endif + +#define _OMAP2420_BALLENTRY(M0, bb, bt) \ +{ \ + .reg_offset = (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET), \ + .balls = { bb, bt }, \ +} + +/* + * Superset of all mux modes for omap2420 + */ +static struct omap_mux __initdata omap2420_muxmodes[] = { + _OMAP2420_MUXENTRY(CAM_D0, 54, + "cam_d0", "hw_dbg2", "sti_dout", "gpio_54", + NULL, NULL, "etk_d2", NULL), + _OMAP2420_MUXENTRY(CAM_D1, 53, + "cam_d1", "hw_dbg3", "sti_din", "gpio_53", + NULL, NULL, "etk_d3", NULL), + _OMAP2420_MUXENTRY(CAM_D2, 52, + "cam_d2", "hw_dbg4", "mcbsp1_clkx", "gpio_52", + NULL, NULL, "etk_d4", NULL), + _OMAP2420_MUXENTRY(CAM_D3, 51, + "cam_d3", "hw_dbg5", "mcbsp1_dr", "gpio_51", + NULL, NULL, "etk_d5", NULL), + _OMAP2420_MUXENTRY(CAM_D4, 50, + "cam_d4", "hw_dbg6", "mcbsp1_fsr", "gpio_50", + NULL, NULL, "etk_d6", NULL), + _OMAP2420_MUXENTRY(CAM_D5, 49, + "cam_d5", "hw_dbg7", "mcbsp1_clkr", "gpio_49", + NULL, NULL, "etk_d7", NULL), + _OMAP2420_MUXENTRY(CAM_D6, 0, + "cam_d6", "hw_dbg8", NULL, NULL, + NULL, NULL, "etk_d8", NULL), + _OMAP2420_MUXENTRY(CAM_D7, 0, + "cam_d7", "hw_dbg9", NULL, NULL, + NULL, NULL, "etk_d9", NULL), + _OMAP2420_MUXENTRY(CAM_D8, 54, + "cam_d8", "hw_dbg10", NULL, "gpio_54", + NULL, NULL, "etk_d10", NULL), + _OMAP2420_MUXENTRY(CAM_D9, 53, + "cam_d9", "hw_dbg11", NULL, "gpio_53", + NULL, NULL, "etk_d11", NULL), + _OMAP2420_MUXENTRY(CAM_HS, 55, + "cam_hs", "hw_dbg1", "mcbsp1_dx", "gpio_55", + NULL, NULL, "etk_d1", NULL), + _OMAP2420_MUXENTRY(CAM_LCLK, 57, + "cam_lclk", NULL, "mcbsp_clks", "gpio_57", + NULL, NULL, "etk_c1", NULL), + _OMAP2420_MUXENTRY(CAM_VS, 56, + "cam_vs", "hw_dbg0", "mcbsp1_fsx", "gpio_56", + NULL, NULL, "etk_d0", NULL), + _OMAP2420_MUXENTRY(CAM_XCLK, 0, + "cam_xclk", NULL, "sti_clk", NULL, + NULL, NULL, "etk_c2", NULL), + _OMAP2420_MUXENTRY(DSS_ACBIAS, 48, + "dss_acbias", NULL, "mcbsp2_fsx", "gpio_48", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(DSS_DATA10, 40, + "dss_data10", NULL, NULL, "gpio_40", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(DSS_DATA11, 41, + "dss_data11", NULL, NULL, "gpio_41", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(DSS_DATA12, 42, + "dss_data12", NULL, NULL, "gpio_42", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(DSS_DATA13, 43, + "dss_data13", NULL, NULL, "gpio_43", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(DSS_DATA14, 44, + "dss_data14", NULL, NULL, "gpio_44", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(DSS_DATA15, 45, + "dss_data15", NULL, NULL, "gpio_45", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(DSS_DATA16, 46, + "dss_data16", NULL, NULL, "gpio_46", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(DSS_DATA17, 47, + "dss_data17", NULL, NULL, "gpio_47", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(DSS_DATA8, 38, + "dss_data8", NULL, NULL, "gpio_38", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(DSS_DATA9, 39, + "dss_data9", NULL, NULL, "gpio_39", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(EAC_AC_DIN, 115, + "eac_ac_din", "mcbsp2_dr", NULL, "gpio_115", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(EAC_AC_DOUT, 116, + "eac_ac_dout", "mcbsp2_dx", NULL, "gpio_116", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(EAC_AC_FS, 114, + "eac_ac_fs", "mcbsp2_fsx", NULL, "gpio_114", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(EAC_AC_MCLK, 117, + "eac_ac_mclk", NULL, NULL, "gpio_117", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(EAC_AC_RST, 118, + "eac_ac_rst", "eac_bt_din", NULL, "gpio_118", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(EAC_AC_SCLK, 113, + "eac_ac_sclk", "mcbsp2_clkx", NULL, "gpio_113", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(EAC_BT_DIN, 73, + "eac_bt_din", NULL, NULL, "gpio_73", + NULL, NULL, "etk_d9", NULL), + _OMAP2420_MUXENTRY(EAC_BT_DOUT, 74, + "eac_bt_dout", NULL, "sti_clk", "gpio_74", + NULL, NULL, "etk_d8", NULL), + _OMAP2420_MUXENTRY(EAC_BT_FS, 72, + "eac_bt_fs", NULL, NULL, "gpio_72", + NULL, NULL, "etk_d10", NULL), + _OMAP2420_MUXENTRY(EAC_BT_SCLK, 71, + "eac_bt_sclk", NULL, NULL, "gpio_71", + NULL, NULL, "etk_d11", NULL), + _OMAP2420_MUXENTRY(GPIO_119, 119, + "gpio_119", NULL, "sti_din", "gpio_119", + NULL, "sys_boot0", "etk_d12", NULL), + _OMAP2420_MUXENTRY(GPIO_120, 120, + "gpio_120", NULL, "sti_dout", "gpio_120", + "cam_d9", "sys_boot1", "etk_d13", NULL), + _OMAP2420_MUXENTRY(GPIO_121, 121, + "gpio_121", NULL, NULL, "gpio_121", + "jtag_emu2", "sys_boot2", "etk_d14", NULL), + _OMAP2420_MUXENTRY(GPIO_122, 122, + "gpio_122", NULL, NULL, "gpio_122", + "jtag_emu3", "sys_boot3", "etk_d15", NULL), + _OMAP2420_MUXENTRY(GPIO_124, 124, + "gpio_124", NULL, NULL, "gpio_124", + NULL, "sys_boot5", NULL, NULL), + _OMAP2420_MUXENTRY(GPIO_125, 125, + "gpio_125", "sys_jtagsel1", "sys_jtagsel2", "gpio_125", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPIO_36, 36, + "gpio_36", NULL, NULL, "gpio_36", + NULL, "sys_boot4", NULL, NULL), + _OMAP2420_MUXENTRY(GPIO_62, 62, + "gpio_62", "uart1_rx", "usb1_dat", "gpio_62", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPIO_6, 6, + "gpio_6", "tv_detpulse", NULL, "gpio_6", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_A10, 3, + "gpmc_a10", NULL, "sys_ndmareq5", "gpio_3", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_A1, 12, + "gpmc_a1", "dss_data18", NULL, "gpio_12", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_A2, 11, + "gpmc_a2", "dss_data19", NULL, "gpio_11", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_A3, 10, + "gpmc_a3", "dss_data20", NULL, "gpio_10", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_A4, 9, + "gpmc_a4", "dss_data21", NULL, "gpio_9", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_A5, 8, + "gpmc_a5", "dss_data22", NULL, "gpio_8", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_A6, 7, + "gpmc_a6", "dss_data23", NULL, "gpio_7", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_A7, 6, + "gpmc_a7", NULL, "sys_ndmareq2", "gpio_6", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_A8, 5, + "gpmc_a8", NULL, "sys_ndmareq3", "gpio_5", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_A9, 4, + "gpmc_a9", NULL, "sys_ndmareq4", "gpio_4", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_CLK, 21, + "gpmc_clk", NULL, NULL, "gpio_21", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_D10, 18, + "gpmc_d10", "ssi2_rdy_rx", NULL, "gpio_18", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_D11, 17, + "gpmc_d11", "ssi2_flag_rx", NULL, "gpio_17", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_D12, 16, + "gpmc_d12", "ssi2_dat_rx", NULL, "gpio_16", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_D13, 15, + "gpmc_d13", "ssi2_rdy_tx", NULL, "gpio_15", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_D14, 14, + "gpmc_d14", "ssi2_flag_tx", NULL, "gpio_14", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_D15, 13, + "gpmc_d15", "ssi2_dat_tx", NULL, "gpio_13", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_D8, 20, + "gpmc_d8", NULL, NULL, "gpio_20", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_D9, 19, + "gpmc_d9", "ssi2_wake", NULL, "gpio_19", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_NBE0, 29, + "gpmc_nbe0", NULL, NULL, "gpio_29", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_NBE1, 30, + "gpmc_nbe1", NULL, NULL, "gpio_30", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_NCS1, 22, + "gpmc_ncs1", NULL, NULL, "gpio_22", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_NCS2, 23, + "gpmc_ncs2", NULL, NULL, "gpio_23", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_NCS3, 24, + "gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_NCS4, 25, + "gpmc_ncs4", NULL, NULL, "gpio_25", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_NCS5, 26, + "gpmc_ncs5", NULL, NULL, "gpio_26", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_NCS6, 27, + "gpmc_ncs6", NULL, NULL, "gpio_27", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_NCS7, 28, + "gpmc_ncs7", "gpmc_io_dir", "gpio_28", NULL, + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_NWP, 31, + "gpmc_nwp", NULL, NULL, "gpio_31", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_WAIT1, 33, + "gpmc_wait1", NULL, NULL, "gpio_33", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_WAIT2, 34, + "gpmc_wait2", NULL, NULL, "gpio_34", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(GPMC_WAIT3, 35, + "gpmc_wait3", NULL, NULL, "gpio_35", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(HDQ_SIO, 101, + "hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(I2C2_SCL, 99, + "i2c2_scl", NULL, "gpt9_pwm_evt", "gpio_99", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(I2C2_SDA, 100, + "i2c2_sda", NULL, "spi2_ncs1", "gpio_100", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(JTAG_EMU0, 127, + "jtag_emu0", NULL, NULL, "gpio_127", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(JTAG_EMU1, 126, + "jtag_emu1", NULL, NULL, "gpio_126", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MCBSP1_CLKR, 92, + "mcbsp1_clkr", "ssi2_dat_tx", "vlynq_tx1", "gpio_92", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MCBSP1_CLKX, 98, + "mcbsp1_clkx", "ssi2_wake", "vlynq_nla", "gpio_98", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MCBSP1_DR, 95, + "mcbsp1_dr", "ssi2_dat_rx", "vlynq_rx1", "gpio_95", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MCBSP1_DX, 94, + "mcbsp1_dx", "ssi2_rdy_tx", "vlynq_clk", "gpio_94", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MCBSP1_FSR, 93, + "mcbsp1_fsr", "ssi2_flag_tx", "vlynq_tx0", "gpio_93", + "spi2_ncs1", NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MCBSP1_FSX, 97, + "mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MCBSP2_CLKX, 12, + "mcbsp2_clkx", NULL, "dss_data23", "gpio_12", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MCBSP2_DR, 11, + "mcbsp2_dr", NULL, "dss_data22", "gpio_11", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MCBSP_CLKS, 96, + "mcbsp_clks", "ssi2_flag_rx", "vlynq_rx0", "gpio_96", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_CLKI, 59, + "sdmmc_clki", "ms_clki", NULL, "gpio_59", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_CLKO, 0, + "sdmmc_clko", "ms_clko", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_CMD_DIR, 8, + "sdmmc_cmd_dir", NULL, NULL, "gpio_8", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_CMD, 0, + "sdmmc_cmd", "ms_bs", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_DAT_DIR0, 7, + "sdmmc_dat_dir0", "ms_dat0_dir", NULL, "gpio_7", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_DAT0, 0, + "sdmmc_dat0", "ms_dat0", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_DAT_DIR1, 78, + "sdmmc_dat_dir1", "ms_datu_dir", "uart2_rts", "gpio_78", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_DAT1, 75, + "sdmmc_dat1", "ms_dat1", NULL, "gpio_75", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_DAT_DIR2, 79, + "sdmmc_dat_dir2", "ms_datu_dir", "uart2_tx", "gpio_79", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_DAT2, 76, + "sdmmc_dat2", "ms_dat2", "uart2_cts", "gpio_76", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_DAT_DIR3, 80, + "sdmmc_dat_dir3", "ms_datu_dir", "uart2_rx", "gpio_80", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(MMC_DAT3, 77, + "sdmmc_dat3", "ms_dat3", NULL, "gpio_77", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SDRC_A12, 2, + "sdrc_a12", NULL, NULL, "gpio_2", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SDRC_A13, 1, + "sdrc_a13", NULL, NULL, "gpio_1", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SDRC_A14, 0, + "sdrc_a14", NULL, NULL, "gpio_0", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SDRC_CKE1, 38, + "sdrc_cke1", NULL, NULL, "gpio_38", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SDRC_NCS1, 37, + "sdrc_ncs1", NULL, NULL, "gpio_37", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI1_CLK, 81, + "spi1_clk", NULL, NULL, "gpio_81", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI1_NCS0, 84, + "spi1_ncs0", NULL, NULL, "gpio_84", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI1_NCS1, 85, + "spi1_ncs1", NULL, NULL, "gpio_85", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI1_NCS2, 86, + "spi1_ncs2", NULL, NULL, "gpio_86", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI1_NCS3, 87, + "spi1_ncs3", NULL, NULL, "gpio_87", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI1_SIMO, 82, + "spi1_simo", NULL, NULL, "gpio_82", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI1_SOMI, 83, + "spi1_somi", NULL, NULL, "gpio_83", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI2_CLK, 88, + "spi2_clk", NULL, NULL, "gpio_88", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI2_NCS0, 91, + "spi2_ncs0", "gpt12_pwm_evt", NULL, "gpio_91", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI2_SIMO, 89, + "spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SPI2_SOMI, 90, + "spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SSI1_DAT_RX, 63, + "ssi1_dat_rx", "eac_md_sclk", NULL, "gpio_63", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SSI1_DAT_TX, 59, + "ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SSI1_FLAG_RX, 64, + "ssi1_flag_rx", "eac_md_din", NULL, "gpio_64", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SSI1_FLAG_TX, 25, + "ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_25", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SSI1_RDY_RX, 65, + "ssi1_rdy_rx", "eac_md_dout", NULL, "gpio_65", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SSI1_RDY_TX, 61, + "ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SSI1_WAKE, 66, + "ssi1_wake", "eac_md_fs", NULL, "gpio_66", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SYS_CLKOUT, 123, + "sys_clkout", NULL, NULL, "gpio_123", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SYS_CLKREQ, 52, + "sys_clkreq", NULL, NULL, "gpio_52", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(SYS_NIRQ, 60, + "sys_nirq", NULL, NULL, "gpio_60", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART1_CTS, 32, + "uart1_cts", NULL, "dss_data18", "gpio_32", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART1_RTS, 8, + "uart1_rts", NULL, "dss_data19", "gpio_8", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART1_RX, 10, + "uart1_rx", NULL, "dss_data21", "gpio_10", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART1_TX, 9, + "uart1_tx", NULL, "dss_data20", "gpio_9", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART2_CTS, 67, + "uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART2_RTS, 68, + "uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART2_RX, 70, + "uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART2_TX, 69, + "uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART3_CTS_RCTX, 102, + "uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART3_RTS_SD, 103, + "uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART3_RX_IRRX, 105, + "uart3_rx_irrx", NULL, NULL, "gpio_105", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(UART3_TX_IRTX, 104, + "uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(USB0_DAT, 112, + "usb0_dat", "uart3_rx_irrx", "uart2_rx", "gpio_112", + "uart2_tx", NULL, NULL, NULL), + _OMAP2420_MUXENTRY(USB0_PUEN, 106, + "usb0_puen", "mcbsp2_dx", NULL, "gpio_106", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(USB0_RCV, 109, + "usb0_rcv", "mcbsp2_fsx", NULL, "gpio_109", + "uart2_cts", NULL, NULL, NULL), + _OMAP2420_MUXENTRY(USB0_SE0, 111, + "usb0_se0", "uart3_tx_irtx", "uart2_tx", "gpio_111", + "uart2_rx", NULL, NULL, NULL), + _OMAP2420_MUXENTRY(USB0_TXEN, 110, + "usb0_txen", "uart3_cts_rctx", "uart2_cts", "gpio_110", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(USB0_VM, 108, + "usb0_vm", "mcbsp2_clkx", NULL, "gpio_108", + "uart2_rx", NULL, NULL, NULL), + _OMAP2420_MUXENTRY(USB0_VP, 107, + "usb0_vp", "mcbsp2_dr", NULL, "gpio_107", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(VLYNQ_CLK, 13, + "vlynq_clk", "usb2_se0", "sys_ndmareq0", "gpio_13", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(VLYNQ_NLA, 58, + "vlynq_nla", NULL, NULL, "gpio_58", + "cam_d6", NULL, NULL, NULL), + _OMAP2420_MUXENTRY(VLYNQ_RX0, 15, + "vlynq_rx0", "usb2_tllse0", NULL, "gpio_15", + "cam_d7", NULL, NULL, NULL), + _OMAP2420_MUXENTRY(VLYNQ_RX1, 14, + "vlynq_rx1", "usb2_rcv", "sys_ndmareq1", "gpio_14", + "cam_d8", NULL, NULL, NULL), + _OMAP2420_MUXENTRY(VLYNQ_TX0, 17, + "vlynq_tx0", "usb2_txen", NULL, "gpio_17", + NULL, NULL, NULL, NULL), + _OMAP2420_MUXENTRY(VLYNQ_TX1, 16, + "vlynq_tx1", "usb2_dat", "sys_clkout2", "gpio_16", + NULL, NULL, NULL, NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +/* + * Balls for 447-pin POP package + */ +#ifdef CONFIG_DEBUG_FS +struct omap_ball __initdata omap2420_pop_ball[] = { + _OMAP2420_BALLENTRY(CAM_D0, "y4", NULL), + _OMAP2420_BALLENTRY(CAM_D1, "y3", NULL), + _OMAP2420_BALLENTRY(CAM_D2, "u7", NULL), + _OMAP2420_BALLENTRY(CAM_D3, "ab3", NULL), + _OMAP2420_BALLENTRY(CAM_D4, "v2", NULL), + _OMAP2420_BALLENTRY(CAM_D5, "ad3", NULL), + _OMAP2420_BALLENTRY(CAM_D6, "aa4", NULL), + _OMAP2420_BALLENTRY(CAM_D7, "ab4", NULL), + _OMAP2420_BALLENTRY(CAM_D8, "ac6", NULL), + _OMAP2420_BALLENTRY(CAM_D9, "ac7", NULL), + _OMAP2420_BALLENTRY(CAM_HS, "v4", NULL), + _OMAP2420_BALLENTRY(CAM_LCLK, "ad6", NULL), + _OMAP2420_BALLENTRY(CAM_VS, "p7", NULL), + _OMAP2420_BALLENTRY(CAM_XCLK, "w4", NULL), + _OMAP2420_BALLENTRY(DSS_ACBIAS, "ae8", NULL), + _OMAP2420_BALLENTRY(DSS_DATA10, "ac12", NULL), + _OMAP2420_BALLENTRY(DSS_DATA11, "ae11", NULL), + _OMAP2420_BALLENTRY(DSS_DATA12, "ae13", NULL), + _OMAP2420_BALLENTRY(DSS_DATA13, "ad13", NULL), + _OMAP2420_BALLENTRY(DSS_DATA14, "ac13", NULL), + _OMAP2420_BALLENTRY(DSS_DATA15, "y12", NULL), + _OMAP2420_BALLENTRY(DSS_DATA16, "ad14", NULL), + _OMAP2420_BALLENTRY(DSS_DATA17, "y13", NULL), + _OMAP2420_BALLENTRY(DSS_DATA8, "ad11", NULL), + _OMAP2420_BALLENTRY(DSS_DATA9, "ad12", NULL), + _OMAP2420_BALLENTRY(EAC_AC_DIN, "ad19", NULL), + _OMAP2420_BALLENTRY(EAC_AC_DOUT, "af22", NULL), + _OMAP2420_BALLENTRY(EAC_AC_FS, "ad16", NULL), + _OMAP2420_BALLENTRY(EAC_AC_MCLK, "y17", NULL), + _OMAP2420_BALLENTRY(EAC_AC_RST, "ae22", NULL), + _OMAP2420_BALLENTRY(EAC_AC_SCLK, "ac18", NULL), + _OMAP2420_BALLENTRY(EAC_BT_DIN, "u8", NULL), + _OMAP2420_BALLENTRY(EAC_BT_DOUT, "ad5", NULL), + _OMAP2420_BALLENTRY(EAC_BT_FS, "w7", NULL), + _OMAP2420_BALLENTRY(EAC_BT_SCLK, "ad4", NULL), + _OMAP2420_BALLENTRY(GPIO_119, "af6", NULL), + _OMAP2420_BALLENTRY(GPIO_120, "af4", NULL), + _OMAP2420_BALLENTRY(GPIO_121, "ae6", NULL), + _OMAP2420_BALLENTRY(GPIO_122, "w3", NULL), + _OMAP2420_BALLENTRY(GPIO_124, "y19", NULL), + _OMAP2420_BALLENTRY(GPIO_125, "ae24", NULL), + _OMAP2420_BALLENTRY(GPIO_36, "y18", NULL), + _OMAP2420_BALLENTRY(GPIO_6, "d6", NULL), + _OMAP2420_BALLENTRY(GPIO_62, "ad18", NULL), + _OMAP2420_BALLENTRY(GPMC_A1, "m8", NULL), + _OMAP2420_BALLENTRY(GPMC_A10, "d5", NULL), + _OMAP2420_BALLENTRY(GPMC_A2, "w9", NULL), + _OMAP2420_BALLENTRY(GPMC_A3, "af10", NULL), + _OMAP2420_BALLENTRY(GPMC_A4, "w8", NULL), + _OMAP2420_BALLENTRY(GPMC_A5, "ae16", NULL), + _OMAP2420_BALLENTRY(GPMC_A6, "af9", NULL), + _OMAP2420_BALLENTRY(GPMC_A7, "e4", NULL), + _OMAP2420_BALLENTRY(GPMC_A8, "j7", NULL), + _OMAP2420_BALLENTRY(GPMC_A9, "ae18", NULL), + _OMAP2420_BALLENTRY(GPMC_CLK, "p1", "l1"), + _OMAP2420_BALLENTRY(GPMC_D10, "t1", "n1"), + _OMAP2420_BALLENTRY(GPMC_D11, "u2", "p2"), + _OMAP2420_BALLENTRY(GPMC_D12, "u1", "p1"), + _OMAP2420_BALLENTRY(GPMC_D13, "p2", "m1"), + _OMAP2420_BALLENTRY(GPMC_D14, "h2", "j2"), + _OMAP2420_BALLENTRY(GPMC_D15, "h1", "k2"), + _OMAP2420_BALLENTRY(GPMC_D8, "v1", "r1"), + _OMAP2420_BALLENTRY(GPMC_D9, "y1", "t1"), + _OMAP2420_BALLENTRY(GPMC_NBE0, "af12", "aa10"), + _OMAP2420_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP2420_BALLENTRY(GPMC_NCS1, "af14", "w1"), + _OMAP2420_BALLENTRY(GPMC_NCS2, "g4", NULL), + _OMAP2420_BALLENTRY(GPMC_NCS3, "t8", NULL), + _OMAP2420_BALLENTRY(GPMC_NCS4, "h8", NULL), + _OMAP2420_BALLENTRY(GPMC_NCS5, "k3", NULL), + _OMAP2420_BALLENTRY(GPMC_NCS6, "m7", NULL), + _OMAP2420_BALLENTRY(GPMC_NCS7, "p3", NULL), + _OMAP2420_BALLENTRY(GPMC_NWP, "ae15", "y5"), + _OMAP2420_BALLENTRY(GPMC_WAIT1, "ae20", "y8"), + _OMAP2420_BALLENTRY(GPMC_WAIT2, "n2", NULL), + _OMAP2420_BALLENTRY(GPMC_WAIT3, "t4", NULL), + _OMAP2420_BALLENTRY(HDQ_SIO, "t23", NULL), + _OMAP2420_BALLENTRY(I2C2_SCL, "l2", NULL), + _OMAP2420_BALLENTRY(I2C2_SDA, "k19", NULL), + _OMAP2420_BALLENTRY(JTAG_EMU0, "n24", NULL), + _OMAP2420_BALLENTRY(JTAG_EMU1, "ac22", NULL), + _OMAP2420_BALLENTRY(MCBSP1_CLKR, "y24", NULL), + _OMAP2420_BALLENTRY(MCBSP1_CLKX, "t19", NULL), + _OMAP2420_BALLENTRY(MCBSP1_DR, "u23", NULL), + _OMAP2420_BALLENTRY(MCBSP1_DX, "r24", NULL), + _OMAP2420_BALLENTRY(MCBSP1_FSR, "r20", NULL), + _OMAP2420_BALLENTRY(MCBSP1_FSX, "r23", NULL), + _OMAP2420_BALLENTRY(MCBSP2_CLKX, "t24", NULL), + _OMAP2420_BALLENTRY(MCBSP2_DR, "p20", NULL), + _OMAP2420_BALLENTRY(MCBSP_CLKS, "p23", NULL), + _OMAP2420_BALLENTRY(MMC_CLKI, "c23", NULL), + _OMAP2420_BALLENTRY(MMC_CLKO, "h23", NULL), + _OMAP2420_BALLENTRY(MMC_CMD, "j23", NULL), + _OMAP2420_BALLENTRY(MMC_CMD_DIR, "j24", NULL), + _OMAP2420_BALLENTRY(MMC_DAT0, "h17", NULL), + _OMAP2420_BALLENTRY(MMC_DAT_DIR0, "f23", NULL), + _OMAP2420_BALLENTRY(MMC_DAT1, "g19", NULL), + _OMAP2420_BALLENTRY(MMC_DAT_DIR1, "d23", NULL), + _OMAP2420_BALLENTRY(MMC_DAT2, "h20", NULL), + _OMAP2420_BALLENTRY(MMC_DAT_DIR2, "g23", NULL), + _OMAP2420_BALLENTRY(MMC_DAT3, "d24", NULL), + _OMAP2420_BALLENTRY(MMC_DAT_DIR3, "e23", NULL), + _OMAP2420_BALLENTRY(SDRC_A12, "w26", "r21"), + _OMAP2420_BALLENTRY(SDRC_A13, "w25", "aa15"), + _OMAP2420_BALLENTRY(SDRC_A14, "aa26", "y12"), + _OMAP2420_BALLENTRY(SDRC_CKE1, "ae25", "y13"), + _OMAP2420_BALLENTRY(SDRC_NCS1, "y25", "t20"), + _OMAP2420_BALLENTRY(SPI1_CLK, "y23", NULL), + _OMAP2420_BALLENTRY(SPI1_NCS0, "w24", NULL), + _OMAP2420_BALLENTRY(SPI1_NCS1, "w23", NULL), + _OMAP2420_BALLENTRY(SPI1_NCS2, "v23", NULL), + _OMAP2420_BALLENTRY(SPI1_NCS3, "u20", NULL), + _OMAP2420_BALLENTRY(SPI1_SIMO, "h10", NULL), + _OMAP2420_BALLENTRY(SPI1_SOMI, "v19", NULL), + _OMAP2420_BALLENTRY(SPI2_CLK, "v24", NULL), + _OMAP2420_BALLENTRY(SPI2_NCS0, "aa24", NULL), + _OMAP2420_BALLENTRY(SPI2_SIMO, "u24", NULL), + _OMAP2420_BALLENTRY(SPI2_SOMI, "v25", NULL), + _OMAP2420_BALLENTRY(SSI1_DAT_RX, "w15", NULL), + _OMAP2420_BALLENTRY(SSI1_DAT_TX, "w13", NULL), + _OMAP2420_BALLENTRY(SSI1_FLAG_RX, "af11", NULL), + _OMAP2420_BALLENTRY(SSI1_FLAG_TX, "ac15", NULL), + _OMAP2420_BALLENTRY(SSI1_RDY_RX, "ac16", NULL), + _OMAP2420_BALLENTRY(SSI1_RDY_TX, "af15", NULL), + _OMAP2420_BALLENTRY(SSI1_WAKE, "ad15", NULL), + _OMAP2420_BALLENTRY(SYS_CLKOUT, "ae19", NULL), + _OMAP2420_BALLENTRY(SYS_CLKREQ, "ad20", NULL), + _OMAP2420_BALLENTRY(SYS_NIRQ, "y20", NULL), + _OMAP2420_BALLENTRY(UART1_CTS, "g20", NULL), + _OMAP2420_BALLENTRY(UART1_RTS, "k20", NULL), + _OMAP2420_BALLENTRY(UART1_RX, "t20", NULL), + _OMAP2420_BALLENTRY(UART1_TX, "h12", NULL), + _OMAP2420_BALLENTRY(UART2_CTS, "ac24", NULL), + _OMAP2420_BALLENTRY(UART2_RTS, "w20", NULL), + _OMAP2420_BALLENTRY(UART2_RX, "ad24", NULL), + _OMAP2420_BALLENTRY(UART2_TX, "ab24", NULL), + _OMAP2420_BALLENTRY(UART3_CTS_RCTX, "k24", NULL), + _OMAP2420_BALLENTRY(UART3_RTS_SD, "m20", NULL), + _OMAP2420_BALLENTRY(UART3_RX_IRRX, "h24", NULL), + _OMAP2420_BALLENTRY(UART3_TX_IRTX, "g24", NULL), + _OMAP2420_BALLENTRY(USB0_DAT, "j25", NULL), + _OMAP2420_BALLENTRY(USB0_PUEN, "l23", NULL), + _OMAP2420_BALLENTRY(USB0_RCV, "k23", NULL), + _OMAP2420_BALLENTRY(USB0_SE0, "l24", NULL), + _OMAP2420_BALLENTRY(USB0_TXEN, "m24", NULL), + _OMAP2420_BALLENTRY(USB0_VM, "n23", NULL), + _OMAP2420_BALLENTRY(USB0_VP, "m23", NULL), + _OMAP2420_BALLENTRY(VLYNQ_CLK, "w12", NULL), + _OMAP2420_BALLENTRY(VLYNQ_NLA, "ae10", NULL), + _OMAP2420_BALLENTRY(VLYNQ_RX0, "ad7", NULL), + _OMAP2420_BALLENTRY(VLYNQ_RX1, "w10", NULL), + _OMAP2420_BALLENTRY(VLYNQ_TX0, "y15", NULL), + _OMAP2420_BALLENTRY(VLYNQ_TX1, "w14", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap2420_pop_ball NULL +#endif + +int __init omap2420_mux_init(struct omap_board_mux *board_subset, int flags) +{ + struct omap_ball *package_balls = NULL; + + switch (flags & OMAP_PACKAGE_MASK) { + case OMAP_PACKAGE_ZAC: + package_balls = omap2420_pop_ball; + break; + case OMAP_PACKAGE_ZAF: + /* REVISIT: Please add data */ + default: + pr_warning("mux: No ball data available for omap2420 package\n"); + } + + return omap_mux_init(OMAP2420_CONTROL_PADCONF_MUX_PBASE, + OMAP2420_CONTROL_PADCONF_MUX_SIZE, + omap2420_muxmodes, NULL, board_subset, + package_balls); +} diff --git a/arch/arm/mach-omap2/mux2420.h b/arch/arm/mach-omap2/mux2420.h new file mode 100644 index 000000000000..0f555aa847b5 --- /dev/null +++ b/arch/arm/mach-omap2/mux2420.h @@ -0,0 +1,282 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP2420_CONTROL_PADCONF_MUX_PBASE 0x48000030LU + +#define OMAP2420_MUX(mode0, mux_value) \ +{ \ + .reg_offset = (OMAP2420_CONTROL_PADCONF_##mode0##_OFFSET), \ + .value = (mux_value), \ +} + +/* + * OMAP2420 CONTROL_PADCONF* register offsets for pin-muxing + * + * Extracted from the TRM. Add 0x48000030 to these values to get the + * absolute addresses. The name in the macro is the mode-0 name of + * the pin. NOTE: These registers are 8-bits wide. + */ +#define OMAP2420_CONTROL_PADCONF_SDRC_A14_OFFSET 0x000 +#define OMAP2420_CONTROL_PADCONF_SDRC_A13_OFFSET 0x001 +#define OMAP2420_CONTROL_PADCONF_SDRC_A12_OFFSET 0x002 +#define OMAP2420_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x003 +#define OMAP2420_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x004 +#define OMAP2420_CONTROL_PADCONF_SDRC_A11_OFFSET 0x005 +#define OMAP2420_CONTROL_PADCONF_SDRC_A10_OFFSET 0x006 +#define OMAP2420_CONTROL_PADCONF_SDRC_A9_OFFSET 0x007 +#define OMAP2420_CONTROL_PADCONF_SDRC_A8_OFFSET 0x008 +#define OMAP2420_CONTROL_PADCONF_SDRC_A7_OFFSET 0x009 +#define OMAP2420_CONTROL_PADCONF_SDRC_A6_OFFSET 0x00a +#define OMAP2420_CONTROL_PADCONF_SDRC_A5_OFFSET 0x00b +#define OMAP2420_CONTROL_PADCONF_SDRC_A4_OFFSET 0x00c +#define OMAP2420_CONTROL_PADCONF_SDRC_A3_OFFSET 0x00d +#define OMAP2420_CONTROL_PADCONF_SDRC_A2_OFFSET 0x00e +#define OMAP2420_CONTROL_PADCONF_SDRC_A1_OFFSET 0x00f +#define OMAP2420_CONTROL_PADCONF_SDRC_A0_OFFSET 0x010 +#define OMAP2420_CONTROL_PADCONF_SDRC_D31_OFFSET 0x021 +#define OMAP2420_CONTROL_PADCONF_SDRC_D30_OFFSET 0x022 +#define OMAP2420_CONTROL_PADCONF_SDRC_D29_OFFSET 0x023 +#define OMAP2420_CONTROL_PADCONF_SDRC_D28_OFFSET 0x024 +#define OMAP2420_CONTROL_PADCONF_SDRC_D27_OFFSET 0x025 +#define OMAP2420_CONTROL_PADCONF_SDRC_D26_OFFSET 0x026 +#define OMAP2420_CONTROL_PADCONF_SDRC_D25_OFFSET 0x027 +#define OMAP2420_CONTROL_PADCONF_SDRC_D24_OFFSET 0x028 +#define OMAP2420_CONTROL_PADCONF_SDRC_D23_OFFSET 0x029 +#define OMAP2420_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02a +#define OMAP2420_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02b +#define OMAP2420_CONTROL_PADCONF_SDRC_D20_OFFSET 0x02c +#define OMAP2420_CONTROL_PADCONF_SDRC_D19_OFFSET 0x02d +#define OMAP2420_CONTROL_PADCONF_SDRC_D18_OFFSET 0x02e +#define OMAP2420_CONTROL_PADCONF_SDRC_D17_OFFSET 0x02f +#define OMAP2420_CONTROL_PADCONF_SDRC_D16_OFFSET 0x030 +#define OMAP2420_CONTROL_PADCONF_SDRC_D15_OFFSET 0x031 +#define OMAP2420_CONTROL_PADCONF_SDRC_D14_OFFSET 0x032 +#define OMAP2420_CONTROL_PADCONF_SDRC_D13_OFFSET 0x033 +#define OMAP2420_CONTROL_PADCONF_SDRC_D12_OFFSET 0x034 +#define OMAP2420_CONTROL_PADCONF_SDRC_D11_OFFSET 0x035 +#define OMAP2420_CONTROL_PADCONF_SDRC_D10_OFFSET 0x036 +#define OMAP2420_CONTROL_PADCONF_SDRC_D9_OFFSET 0x037 +#define OMAP2420_CONTROL_PADCONF_SDRC_D8_OFFSET 0x038 +#define OMAP2420_CONTROL_PADCONF_SDRC_D7_OFFSET 0x039 +#define OMAP2420_CONTROL_PADCONF_SDRC_D6_OFFSET 0x03a +#define OMAP2420_CONTROL_PADCONF_SDRC_D5_OFFSET 0x03b +#define OMAP2420_CONTROL_PADCONF_SDRC_D4_OFFSET 0x03c +#define OMAP2420_CONTROL_PADCONF_SDRC_D3_OFFSET 0x03d +#define OMAP2420_CONTROL_PADCONF_SDRC_D2_OFFSET 0x03e +#define OMAP2420_CONTROL_PADCONF_SDRC_D1_OFFSET 0x03f +#define OMAP2420_CONTROL_PADCONF_SDRC_D0_OFFSET 0x040 +#define OMAP2420_CONTROL_PADCONF_GPMC_A10_OFFSET 0x041 +#define OMAP2420_CONTROL_PADCONF_GPMC_A9_OFFSET 0x042 +#define OMAP2420_CONTROL_PADCONF_GPMC_A8_OFFSET 0x043 +#define OMAP2420_CONTROL_PADCONF_GPMC_A7_OFFSET 0x044 +#define OMAP2420_CONTROL_PADCONF_GPMC_A6_OFFSET 0x045 +#define OMAP2420_CONTROL_PADCONF_GPMC_A5_OFFSET 0x046 +#define OMAP2420_CONTROL_PADCONF_GPMC_A4_OFFSET 0x047 +#define OMAP2420_CONTROL_PADCONF_GPMC_A3_OFFSET 0x048 +#define OMAP2420_CONTROL_PADCONF_GPMC_A2_OFFSET 0x049 +#define OMAP2420_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a +#define OMAP2420_CONTROL_PADCONF_GPMC_D15_OFFSET 0x04b +#define OMAP2420_CONTROL_PADCONF_GPMC_D14_OFFSET 0x04c +#define OMAP2420_CONTROL_PADCONF_GPMC_D13_OFFSET 0x04d +#define OMAP2420_CONTROL_PADCONF_GPMC_D12_OFFSET 0x04e +#define OMAP2420_CONTROL_PADCONF_GPMC_D11_OFFSET 0x04f +#define OMAP2420_CONTROL_PADCONF_GPMC_D10_OFFSET 0x050 +#define OMAP2420_CONTROL_PADCONF_GPMC_D9_OFFSET 0x051 +#define OMAP2420_CONTROL_PADCONF_GPMC_D8_OFFSET 0x052 +#define OMAP2420_CONTROL_PADCONF_GPMC_D7_OFFSET 0x053 +#define OMAP2420_CONTROL_PADCONF_GPMC_D6_OFFSET 0x054 +#define OMAP2420_CONTROL_PADCONF_GPMC_D5_OFFSET 0x055 +#define OMAP2420_CONTROL_PADCONF_GPMC_D4_OFFSET 0x056 +#define OMAP2420_CONTROL_PADCONF_GPMC_D3_OFFSET 0x057 +#define OMAP2420_CONTROL_PADCONF_GPMC_D2_OFFSET 0x058 +#define OMAP2420_CONTROL_PADCONF_GPMC_D1_OFFSET 0x059 +#define OMAP2420_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05a +#define OMAP2420_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x05b +#define OMAP2420_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x05c +#define OMAP2420_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x05d +#define OMAP2420_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x05e +#define OMAP2420_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x05f +#define OMAP2420_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x060 +#define OMAP2420_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x061 +#define OMAP2420_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x062 +#define OMAP2420_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x063 +#define OMAP2420_CONTROL_PADCONF_GPMC_NALE_ALE_OFFSET 0x064 +#define OMAP2420_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x065 +#define OMAP2420_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x066 +#define OMAP2420_CONTROL_PADCONF_GPMC_NBE0_OFFSET 0x067 +#define OMAP2420_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x068 +#define OMAP2420_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x069 +#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x06a +#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x06b +#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x06c +#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x06d +#define OMAP2420_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x06e +#define OMAP2420_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x06f +#define OMAP2420_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x070 +#define OMAP2420_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x071 +#define OMAP2420_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x072 +#define OMAP2420_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x073 +#define OMAP2420_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x074 +#define OMAP2420_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x075 +#define OMAP2420_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x076 +#define OMAP2420_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x077 +#define OMAP2420_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x078 +#define OMAP2420_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x079 +#define OMAP2420_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x07a +#define OMAP2420_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x07f +#define OMAP2420_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x080 +#define OMAP2420_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x081 +#define OMAP2420_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x082 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x083 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x084 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x085 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x086 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x087 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x088 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x089 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x08a +#define OMAP2420_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x08b +#define OMAP2420_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x08c +#define OMAP2420_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x08d +#define OMAP2420_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x08e +#define OMAP2420_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x08f +#define OMAP2420_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x090 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x091 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x092 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x093 +#define OMAP2420_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x094 +#define OMAP2420_CONTROL_PADCONF_UART1_CTS_OFFSET 0x095 +#define OMAP2420_CONTROL_PADCONF_UART1_RTS_OFFSET 0x096 +#define OMAP2420_CONTROL_PADCONF_UART1_TX_OFFSET 0x097 +#define OMAP2420_CONTROL_PADCONF_UART1_RX_OFFSET 0x098 +#define OMAP2420_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x099 +#define OMAP2420_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x09a +#define OMAP2420_CONTROL_PADCONF_DSS_PCL_OFFSET 0x09b +#define OMAP2420_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x09c +#define OMAP2420_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x09d +#define OMAP2420_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x09e +#define OMAP2420_CONTROL_PADCONF_CAM_D9_OFFSET 0x09f +#define OMAP2420_CONTROL_PADCONF_CAM_D8_OFFSET 0x0a0 +#define OMAP2420_CONTROL_PADCONF_CAM_D7_OFFSET 0x0a1 +#define OMAP2420_CONTROL_PADCONF_CAM_D6_OFFSET 0x0a2 +#define OMAP2420_CONTROL_PADCONF_CAM_D5_OFFSET 0x0a3 +#define OMAP2420_CONTROL_PADCONF_CAM_D4_OFFSET 0x0a4 +#define OMAP2420_CONTROL_PADCONF_CAM_D3_OFFSET 0x0a5 +#define OMAP2420_CONTROL_PADCONF_CAM_D2_OFFSET 0x0a6 +#define OMAP2420_CONTROL_PADCONF_CAM_D1_OFFSET 0x0a7 +#define OMAP2420_CONTROL_PADCONF_CAM_D0_OFFSET 0x0a8 +#define OMAP2420_CONTROL_PADCONF_CAM_HS_OFFSET 0x0a9 +#define OMAP2420_CONTROL_PADCONF_CAM_VS_OFFSET 0x0aa +#define OMAP2420_CONTROL_PADCONF_CAM_LCLK_OFFSET 0x0ab +#define OMAP2420_CONTROL_PADCONF_CAM_XCLK_OFFSET 0x0ac +#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET 0x0ad +#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET 0x0ae +#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET 0x0af +#define OMAP2420_CONTROL_PADCONF_GPIO_62_OFFSET 0x0b0 +#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET 0x0b1 +#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET 0x0b2 +#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET 0x0b3 +#define OMAP2420_CONTROL_PADCONF_SSI1_WAKE_OFFSET 0x0b4 +#define OMAP2420_CONTROL_PADCONF_VLYNQ_CLK_OFFSET 0x0b5 +#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX1_OFFSET 0x0b6 +#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX0_OFFSET 0x0b7 +#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX1_OFFSET 0x0b8 +#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX0_OFFSET 0x0b9 +#define OMAP2420_CONTROL_PADCONF_VLYNQ_NLA_OFFSET 0x0ba +#define OMAP2420_CONTROL_PADCONF_UART2_CTS_OFFSET 0x0bb +#define OMAP2420_CONTROL_PADCONF_UART2_RTS_OFFSET 0x0bc +#define OMAP2420_CONTROL_PADCONF_UART2_TX_OFFSET 0x0bd +#define OMAP2420_CONTROL_PADCONF_UART2_RX_OFFSET 0x0be +#define OMAP2420_CONTROL_PADCONF_EAC_BT_SCLK_OFFSET 0x0bf +#define OMAP2420_CONTROL_PADCONF_EAC_BT_FS_OFFSET 0x0c0 +#define OMAP2420_CONTROL_PADCONF_EAC_BT_DIN_OFFSET 0x0c1 +#define OMAP2420_CONTROL_PADCONF_EAC_BT_DOUT_OFFSET 0x0c2 +#define OMAP2420_CONTROL_PADCONF_MMC_CLKO_OFFSET 0x0c3 +#define OMAP2420_CONTROL_PADCONF_MMC_CMD_OFFSET 0x0c4 +#define OMAP2420_CONTROL_PADCONF_MMC_DAT0_OFFSET 0x0c5 +#define OMAP2420_CONTROL_PADCONF_MMC_DAT1_OFFSET 0x0c6 +#define OMAP2420_CONTROL_PADCONF_MMC_DAT2_OFFSET 0x0c7 +#define OMAP2420_CONTROL_PADCONF_MMC_DAT3_OFFSET 0x0c8 +#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR0_OFFSET 0x0c9 +#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR1_OFFSET 0x0ca +#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR2_OFFSET 0x0cb +#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR3_OFFSET 0x0cc +#define OMAP2420_CONTROL_PADCONF_MMC_CMD_DIR_OFFSET 0x0cd +#define OMAP2420_CONTROL_PADCONF_MMC_CLKI_OFFSET 0x0ce +#define OMAP2420_CONTROL_PADCONF_SPI1_CLK_OFFSET 0x0cf +#define OMAP2420_CONTROL_PADCONF_SPI1_SIMO_OFFSET 0x0d0 +#define OMAP2420_CONTROL_PADCONF_SPI1_SOMI_OFFSET 0x0d1 +#define OMAP2420_CONTROL_PADCONF_SPI1_NCS0_OFFSET 0x0d2 +#define OMAP2420_CONTROL_PADCONF_SPI1_NCS1_OFFSET 0x0d3 +#define OMAP2420_CONTROL_PADCONF_SPI1_NCS2_OFFSET 0x0d4 +#define OMAP2420_CONTROL_PADCONF_SPI1_NCS3_OFFSET 0x0d5 +#define OMAP2420_CONTROL_PADCONF_SPI2_CLK_OFFSET 0x0d6 +#define OMAP2420_CONTROL_PADCONF_SPI2_SIMO_OFFSET 0x0d7 +#define OMAP2420_CONTROL_PADCONF_SPI2_SOMI_OFFSET 0x0d8 +#define OMAP2420_CONTROL_PADCONF_SPI2_NCS0_OFFSET 0x0d9 +#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x0da +#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x0db +#define OMAP2420_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x0dc +#define OMAP2420_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x0dd +#define OMAP2420_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x0de +#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x0df +#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x0e0 +#define OMAP2420_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x0e1 +#define OMAP2420_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x0e2 +#define OMAP2420_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x0e3 +#define OMAP2420_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x0e4 +#define OMAP2420_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x0e5 +#define OMAP2420_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x0e6 +#define OMAP2420_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x0e7 +#define OMAP2420_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x0e8 +#define OMAP2420_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x0e9 +#define OMAP2420_CONTROL_PADCONF_TV_CVBS_OFFSET 0x0ea +#define OMAP2420_CONTROL_PADCONF_TV_VREF_OFFSET 0x0eb +#define OMAP2420_CONTROL_PADCONF_TV_RREF_OFFSET 0x0ec +#define OMAP2420_CONTROL_PADCONF_USB0_PUEN_OFFSET 0x0ed +#define OMAP2420_CONTROL_PADCONF_USB0_VP_OFFSET 0x0ee +#define OMAP2420_CONTROL_PADCONF_USB0_VM_OFFSET 0x0ef +#define OMAP2420_CONTROL_PADCONF_USB0_RCV_OFFSET 0x0f0 +#define OMAP2420_CONTROL_PADCONF_USB0_TXEN_OFFSET 0x0f1 +#define OMAP2420_CONTROL_PADCONF_USB0_SE0_OFFSET 0x0f2 +#define OMAP2420_CONTROL_PADCONF_USB0_DAT_OFFSET 0x0f3 +#define OMAP2420_CONTROL_PADCONF_EAC_AC_SCLK_OFFSET 0x0f4 +#define OMAP2420_CONTROL_PADCONF_EAC_AC_FS_OFFSET 0x0f5 +#define OMAP2420_CONTROL_PADCONF_EAC_AC_DIN_OFFSET 0x0f6 +#define OMAP2420_CONTROL_PADCONF_EAC_AC_DOUT_OFFSET 0x0f7 +#define OMAP2420_CONTROL_PADCONF_EAC_AC_MCLK_OFFSET 0x0f8 +#define OMAP2420_CONTROL_PADCONF_EAC_AC_RST_OFFSET 0x0f9 +#define OMAP2420_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET 0x0fa +#define OMAP2420_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x0fb +#define OMAP2420_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x0fc +#define OMAP2420_CONTROL_PADCONF_SYS_NV_OFFSET 0x0fd +#define OMAP2420_CONTROL_PADCONF_GPIO_119_OFFSET 0x0fe +#define OMAP2420_CONTROL_PADCONF_GPIO_120_OFFSET 0x0ff +#define OMAP2420_CONTROL_PADCONF_GPIO_121_OFFSET 0x100 +#define OMAP2420_CONTROL_PADCONF_GPIO_122_OFFSET 0x101 +#define OMAP2420_CONTROL_PADCONF_SYS_32K_OFFSET 0x102 +#define OMAP2420_CONTROL_PADCONF_SYS_XTALIN_OFFSET 0x103 +#define OMAP2420_CONTROL_PADCONF_SYS_XTALOUT_OFFSET 0x104 +#define OMAP2420_CONTROL_PADCONF_GPIO_36_OFFSET 0x105 +#define OMAP2420_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x106 +#define OMAP2420_CONTROL_PADCONF_SYS_CLKOUT_OFFSET 0x107 +#define OMAP2420_CONTROL_PADCONF_GPIO_6_OFFSET 0x108 +#define OMAP2420_CONTROL_PADCONF_GPIO_124_OFFSET 0x109 +#define OMAP2420_CONTROL_PADCONF_GPIO_125_OFFSET 0x10a +#define OMAP2420_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x10b +#define OMAP2420_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x10c +#define OMAP2420_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x10d +#define OMAP2420_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x10e +#define OMAP2420_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0x10f +#define OMAP2420_CONTROL_PADCONF_JTAG_TMS_OFFSET 0x110 +#define OMAP2420_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x111 +#define OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET 0x112 + +#define OMAP2420_CONTROL_PADCONF_MUX_SIZE \ + (OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x1) diff --git a/arch/arm/mach-omap2/mux2430.c b/arch/arm/mach-omap2/mux2430.c new file mode 100644 index 000000000000..7dcaaa8af32a --- /dev/null +++ b/arch/arm/mach-omap2/mux2430.c @@ -0,0 +1,791 @@ +/* + * Copyright (C) 2010 Nokia + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> + +#include "mux.h" + +#ifdef CONFIG_OMAP_MUX + +#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ + .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \ +} + +#else + +#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ +} + +#endif + +#define _OMAP2430_BALLENTRY(M0, bb, bt) \ +{ \ + .reg_offset = (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET), \ + .balls = { bb, bt }, \ +} + +/* + * Superset of all mux modes for omap2430 + */ +static struct omap_mux __initdata omap2430_muxmodes[] = { + _OMAP2430_MUXENTRY(CAM_D0, 133, + "cam_d0", "hw_dbg0", "sti_dout", "gpio_133", + NULL, NULL, "etk_d2", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D10, 146, + "cam_d10", NULL, NULL, "gpio_146", + NULL, NULL, "etk_d12", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D11, 145, + "cam_d11", NULL, NULL, "gpio_145", + NULL, NULL, "etk_d13", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D1, 132, + "cam_d1", "hw_dbg1", "sti_din", "gpio_132", + NULL, NULL, "etk_d3", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D2, 129, + "cam_d2", "hw_dbg2", "mcbsp1_clkx", "gpio_129", + NULL, NULL, "etk_d4", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D3, 128, + "cam_d3", "hw_dbg3", "mcbsp1_dr", "gpio_128", + NULL, NULL, "etk_d5", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D4, 143, + "cam_d4", "hw_dbg4", "mcbsp1_fsr", "gpio_143", + NULL, NULL, "etk_d6", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D5, 112, + "cam_d5", "hw_dbg5", "mcbsp1_clkr", "gpio_112", + NULL, NULL, "etk_d7", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D6, 137, + "cam_d6", "hw_dbg6", NULL, "gpio_137", + NULL, NULL, "etk_d8", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D7, 136, + "cam_d7", "hw_dbg7", NULL, "gpio_136", + NULL, NULL, "etk_d9", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D8, 135, + "cam_d8", "hw_dbg8", NULL, "gpio_135", + NULL, NULL, "etk_d10", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_D9, 134, + "cam_d9", "hw_dbg9", NULL, "gpio_134", + NULL, NULL, "etk_d11", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_HS, 11, + "cam_hs", "hw_dbg10", "mcbsp1_dx", "gpio_11", + NULL, NULL, "etk_d1", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_LCLK, 0, + "cam_lclk", NULL, "mcbsp_clks", NULL, + NULL, NULL, "etk_c1", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_VS, 12, + "cam_vs", "hw_dbg11", "mcbsp1_fsx", "gpio_12", + NULL, NULL, "etk_d0", "safe_mode"), + _OMAP2430_MUXENTRY(CAM_XCLK, 0, + "cam_xclk", NULL, "sti_clk", NULL, + NULL, NULL, "etk_c2", NULL), + _OMAP2430_MUXENTRY(DSS_ACBIAS, 48, + "dss_acbias", NULL, "mcbsp2_fsx", "gpio_48", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA0, 40, + "dss_data0", "uart1_cts", NULL, "gpio_40", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA10, 128, + "dss_data10", "sdi_data1n", NULL, "gpio_128", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA11, 129, + "dss_data11", "sdi_data1p", NULL, "gpio_129", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA12, 130, + "dss_data12", "sdi_data2n", NULL, "gpio_130", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA13, 131, + "dss_data13", "sdi_data2p", NULL, "gpio_131", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA14, 132, + "dss_data14", "sdi_data3n", NULL, "gpio_132", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA15, 133, + "dss_data15", "sdi_data3p", NULL, "gpio_133", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA16, 46, + "dss_data16", NULL, NULL, "gpio_46", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA17, 47, + "dss_data17", NULL, NULL, "gpio_47", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA1, 41, + "dss_data1", "uart1_rts", NULL, "gpio_41", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA2, 42, + "dss_data2", "uart1_tx", NULL, "gpio_42", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA3, 43, + "dss_data3", "uart1_rx", NULL, "gpio_43", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA4, 44, + "dss_data4", "uart3_rx_irrx", NULL, "gpio_44", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA5, 45, + "dss_data5", "uart3_tx_irtx", NULL, "gpio_45", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA6, 144, + "dss_data6", NULL, NULL, "gpio_144", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA7, 147, + "dss_data7", NULL, NULL, "gpio_147", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA8, 38, + "dss_data8", NULL, NULL, "gpio_38", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_DATA9, 39, + "dss_data9", NULL, NULL, "gpio_39", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(DSS_HSYNC, 110, + "dss_hsync", NULL, NULL, "gpio_110", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_113, 113, + "gpio_113", "mcbsp2_clkx", NULL, "gpio_113", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_114, 114, + "gpio_114", "mcbsp2_fsx", NULL, "gpio_114", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_115, 115, + "gpio_115", "mcbsp2_dr", NULL, "gpio_115", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_116, 116, + "gpio_116", "mcbsp2_dx", NULL, "gpio_116", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_128, 128, + "gpio_128", NULL, "sti_din", "gpio_128", + NULL, "sys_boot0", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_129, 129, + "gpio_129", NULL, "sti_dout", "gpio_129", + NULL, "sys_boot1", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_130, 130, + "gpio_130", NULL, NULL, "gpio_130", + "jtag_emu2", "sys_boot2", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_131, 131, + "gpio_131", NULL, NULL, "gpio_131", + "jtag_emu3", "sys_boot3", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_132, 132, + "gpio_132", NULL, NULL, "gpio_132", + NULL, "sys_boot4", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_133, 133, + "gpio_133", NULL, NULL, "gpio_133", + NULL, "sys_boot5", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_134, 134, + "gpio_134", "ccp_datn", NULL, "gpio_134", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_135, 135, + "gpio_135", "ccp_datp", NULL, "gpio_135", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_136, 136, + "gpio_136", "ccp_clkn", NULL, "gpio_136", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_137, 137, + "gpio_137", "ccp_clkp", NULL, "gpio_137", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_138, 138, + "gpio_138", "spi3_clk", NULL, "gpio_138", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_139, 139, + "gpio_139", "spi3_cs0", "sys_ndmareq3", "gpio_139", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_140, 140, + "gpio_140", "spi3_simo", "sys_ndmareq4", "gpio_140", + NULL, NULL, "etk_d14", "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_141, 141, + "gpio_141", "spi3_somi", NULL, "gpio_141", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_142, 142, + "gpio_142", "spi3_cs1", "sys_ndmareq2", "gpio_142", + NULL, NULL, "etk_d15", "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_148, 148, + "gpio_148", "mcbsp5_fsx", NULL, "gpio_148", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_149, 149, + "gpio_149", "mcbsp5_dx", NULL, "gpio_149", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_150, 150, + "gpio_150", "mcbsp5_dr", NULL, "gpio_150", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_151, 151, + "gpio_151", "sys_pwrok", NULL, "gpio_151", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_152, 152, + "gpio_152", "uart1_cts", "sys_ndmareq1", "gpio_152", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_153, 153, + "gpio_153", "uart1_rx", "sys_ndmareq0", "gpio_153", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_154, 154, + "gpio_154", "mcbsp5_clkx", NULL, "gpio_154", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_63, 63, + "gpio_63", "mcbsp4_clkx", NULL, "gpio_63", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_78, 78, + "gpio_78", NULL, "uart2_rts", "gpio_78", + "uart3_rts_sd", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_79, 79, + "gpio_79", "secure_indicator", "uart2_tx", "gpio_79", + "uart3_tx_irtx", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_7, 7, + "gpio_7", NULL, "uart2_cts", "gpio_7", + "uart3_cts_rctx", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPIO_80, 80, + "gpio_80", NULL, "uart2_rx", "gpio_80", + "uart3_rx_irrx", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_A10, 3, + "gpmc_a10", NULL, "sys_ndmareq0", "gpio_3", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_A1, 31, + "gpmc_a1", NULL, NULL, "gpio_31", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_A2, 30, + "gpmc_a2", NULL, NULL, "gpio_30", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_A3, 29, + "gpmc_a3", NULL, NULL, "gpio_29", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_A4, 49, + "gpmc_a4", NULL, NULL, "gpio_49", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_A5, 53, + "gpmc_a5", NULL, NULL, "gpio_53", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_A6, 52, + "gpmc_a6", NULL, NULL, "gpio_52", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_A7, 6, + "gpmc_a7", NULL, NULL, "gpio_6", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_A8, 5, + "gpmc_a8", NULL, NULL, "gpio_5", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_A9, 4, + "gpmc_a9", NULL, "sys_ndmareq1", "gpio_4", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_CLK, 21, + "gpmc_clk", NULL, NULL, "gpio_21", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_D10, 18, + "gpmc_d10", NULL, NULL, "gpio_18", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_D11, 57, + "gpmc_d11", NULL, NULL, "gpio_57", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_D12, 77, + "gpmc_d12", NULL, NULL, "gpio_77", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_D13, 76, + "gpmc_d13", NULL, NULL, "gpio_76", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_D14, 55, + "gpmc_d14", NULL, NULL, "gpio_55", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_D15, 54, + "gpmc_d15", NULL, NULL, "gpio_54", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_D8, 20, + "gpmc_d8", NULL, NULL, "gpio_20", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_D9, 19, + "gpmc_d9", NULL, NULL, "gpio_19", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_NCS1, 22, + "gpmc_ncs1", NULL, NULL, "gpio_22", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_NCS2, 23, + "gpmc_ncs2", NULL, NULL, "gpio_23", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_NCS3, 24, + "gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_NCS4, 25, + "gpmc_ncs4", NULL, NULL, "gpio_25", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_NCS5, 26, + "gpmc_ncs5", NULL, NULL, "gpio_26", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_NCS6, 27, + "gpmc_ncs6", NULL, NULL, "gpio_27", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_NCS7, 28, + "gpmc_ncs7", "gpmc_io_dir", NULL, "gpio_28", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_WAIT1, 33, + "gpmc_wait1", NULL, NULL, "gpio_33", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_WAIT2, 34, + "gpmc_wait2", NULL, NULL, "gpio_34", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(GPMC_WAIT3, 35, + "gpmc_wait3", NULL, NULL, "gpio_35", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(HDQ_SIO, 101, + "hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101", + "uart3_rx_irrx", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(I2C1_SCL, 50, + "i2c1_scl", NULL, NULL, "gpio_50", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(I2C1_SDA, 51, + "i2c1_sda", NULL, NULL, "gpio_51", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(I2C2_SCL, 99, + "i2c2_scl", NULL, NULL, "gpio_99", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(I2C2_SDA, 100, + "i2c2_sda", NULL, NULL, "gpio_100", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(JTAG_EMU0, 127, + "jtag_emu0", "secure_indicator", NULL, "gpio_127", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(JTAG_EMU1, 126, + "jtag_emu1", NULL, NULL, "gpio_126", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP1_CLKR, 92, + "mcbsp1_clkr", "ssi2_dat_tx", NULL, "gpio_92", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP1_CLKX, 98, + "mcbsp1_clkx", "ssi2_wake", NULL, "gpio_98", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP1_DR, 95, + "mcbsp1_dr", "ssi2_dat_rx", NULL, "gpio_95", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP1_DX, 94, + "mcbsp1_dx", "ssi2_rdy_tx", NULL, "gpio_94", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP1_FSR, 93, + "mcbsp1_fsr", "ssi2_flag_tx", NULL, "gpio_93", + "spi2_cs1", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP1_FSX, 97, + "mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP2_CLKX, 147, + "mcbsp2_clkx", "sdi_clkp", "dss_data23", "gpio_147", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP2_DR, 144, + "mcbsp2_dr", "sdi_clkn", "dss_data22", "gpio_144", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP3_CLKX, 71, + "mcbsp3_clkx", NULL, NULL, "gpio_71", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP3_DR, 73, + "mcbsp3_dr", NULL, NULL, "gpio_73", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP3_DX, 74, + "mcbsp3_dx", NULL, "sti_clk", "gpio_74", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP3_FSX, 72, + "mcbsp3_fsx", NULL, NULL, "gpio_72", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(MCBSP_CLKS, 96, + "mcbsp_clks", "ssi2_flag_rx", NULL, "gpio_96", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC1_CLKO, 0, + "sdmmc1_clko", "ms_clko", NULL, NULL, + NULL, "hw_dbg9", "hw_dbg3", "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC1_CMD, 0, + "sdmmc1_cmd", "ms_bs", NULL, NULL, + NULL, "hw_dbg8", "hw_dbg2", "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC1_DAT0, 0, + "sdmmc1_dat0", "ms_dat0", NULL, NULL, + NULL, "hw_dbg7", "hw_dbg1", "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC1_DAT1, 75, + "sdmmc1_dat1", "ms_dat1", NULL, "gpio_75", + NULL, "hw_dbg6", "hw_dbg0", "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC1_DAT2, 0, + "sdmmc1_dat2", "ms_dat2", NULL, NULL, + NULL, "hw_dbg5", "hw_dbg10", "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC1_DAT3, 0, + "sdmmc1_dat3", "ms_dat3", NULL, NULL, + NULL, "hw_dbg4", "hw_dbg11", "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC2_CLKO, 13, + "sdmmc2_clko", NULL, NULL, "gpio_13", + NULL, "spi3_clk", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC2_CMD, 15, + "sdmmc2_cmd", "usb2_rcv", NULL, "gpio_15", + NULL, "spi3_simo", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC2_DAT0, 16, + "sdmmc2_dat0", "usb2_tllse0", NULL, "gpio_16", + NULL, "spi3_somi", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC2_DAT1, 58, + "sdmmc2_dat1", "usb2_txen", NULL, "gpio_58", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC2_DAT2, 17, + "sdmmc2_dat2", "usb2_dat", NULL, "gpio_17", + NULL, "spi3_cs1", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDMMC2_DAT3, 14, + "sdmmc2_dat3", "usb2_se0", NULL, "gpio_14", + NULL, "spi3_cs0", NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDRC_A12, 2, + "sdrc_a12", NULL, NULL, "gpio_2", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDRC_A13, 1, + "sdrc_a13", NULL, NULL, "gpio_1", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDRC_A14, 0, + "sdrc_a14", NULL, NULL, "gpio_0", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDRC_CKE1, 36, + "sdrc_cke1", NULL, NULL, "gpio_36", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SDRC_NCS1, 37, + "sdrc_ncs1", NULL, NULL, "gpio_37", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI1_CLK, 81, + "spi1_clk", NULL, NULL, "gpio_81", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI1_CS0, 84, + "spi1_cs0", NULL, NULL, "gpio_84", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI1_CS1, 85, + "spi1_cs1", NULL, NULL, "gpio_85", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI1_CS2, 86, + "spi1_cs2", NULL, NULL, "gpio_86", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI1_CS3, 87, + "spi1_cs3", "spi2_cs1", NULL, "gpio_87", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI1_SIMO, 82, + "spi1_simo", NULL, NULL, "gpio_82", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI1_SOMI, 83, + "spi1_somi", NULL, NULL, "gpio_83", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI2_CLK, 88, + "spi2_clk", "gpt9_pwm_evt", NULL, "gpio_88", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI2_CS0, 91, + "spi2_cs0", "gpt12_pwm_evt", NULL, "gpio_91", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI2_SIMO, 89, + "spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SPI2_SOMI, 90, + "spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SSI1_DAT_RX, 62, + "ssi1_dat_rx", "uart1_rx", "usb1_dat", "gpio_62", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SSI1_DAT_TX, 59, + "ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SSI1_FLAG_RX, 64, + "ssi1_flag_rx", "mcbsp4_dr", NULL, "gpio_64", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SSI1_FLAG_TX, 60, + "ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_60", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SSI1_RDY_RX, 65, + "ssi1_rdy_rx", "mcbsp4_dx", NULL, "gpio_65", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SSI1_RDY_TX, 61, + "ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SSI1_WAKE, 66, + "ssi1_wake", "mcbsp4_fsx", NULL, "gpio_66", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SYS_CLKOUT, 111, + "sys_clkout", NULL, NULL, "gpio_111", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SYS_DRM_MSECURE, 118, + "sys_drm_msecure", NULL, "sys_ndmareq6", "gpio_118", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SYS_NIRQ0, 56, + "sys_nirq0", NULL, NULL, "gpio_56", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(SYS_NIRQ1, 125, + "sys_nirq1", NULL, "sys_ndmareq5", "gpio_125", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART1_CTS, 32, + "uart1_cts", "sdi_vsync", "dss_data18", "gpio_32", + "mcbsp5_clkx", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART1_RTS, 8, + "uart1_rts", "sdi_hsync", "dss_data19", "gpio_8", + "mcbsp5_fsx", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART1_RX, 10, + "uart1_rx", "sdi_stp", "dss_data21", "gpio_10", + "mcbsp5_dr", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART1_TX, 9, + "uart1_tx", "sdi_den", "dss_data20", "gpio_9", + "mcbsp5_dx", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART2_CTS, 67, + "uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART2_RTS, 68, + "uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART2_RX, 70, + "uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART2_TX, 69, + "uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART3_CTS_RCTX, 102, + "uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART3_RTS_SD, 103, + "uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART3_RX_IRRX, 105, + "uart3_rx_irrx", NULL, NULL, "gpio_105", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(UART3_TX_IRTX, 104, + "uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_CLK, 120, + "usb0hs_clk", NULL, NULL, "gpio_120", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_DATA0, 0, + "usb0hs_data0", "uart3_tx_irtx", NULL, NULL, + "usb0_txen", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_DATA1, 0, + "usb0hs_data1", "uart3_rx_irrx", NULL, NULL, + "usb0_dat", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_DATA2, 0, + "usb0hs_data2", "uart3_rts_sd", NULL, NULL, + "usb0_se0", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_DATA3, 106, + "usb0hs_data3", NULL, "uart3_cts_rctx", "gpio_106", + "usb0_puen", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_DATA4, 107, + "usb0hs_data4", "mcbsp2_dr", NULL, "gpio_107", + "usb0_vp", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_DATA5, 108, + "usb0hs_data5", "mcbsp2_dx", NULL, "gpio_108", + "usb0_vm", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_DATA6, 109, + "usb0hs_data6", "mcbsp2_fsx", NULL, "gpio_109", + "usb0_rcv", NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_DATA7, 124, + "usb0hs_data7", "mcbsp2_clkx", NULL, "gpio_124", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_DIR, 121, + "usb0hs_dir", NULL, NULL, "gpio_121", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_NXT, 123, + "usb0hs_nxt", NULL, NULL, "gpio_123", + NULL, NULL, NULL, "safe_mode"), + _OMAP2430_MUXENTRY(USB0HS_STP, 122, + "usb0hs_stp", NULL, NULL, "gpio_122", + NULL, NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +/* + * Balls for POP package + * 447-pin s-PBGA Package, 0.00mm Ball Pitch (Bottom) + */ +#ifdef CONFIG_DEBUG_FS +struct omap_ball __initdata omap2430_pop_ball[] = { + _OMAP2430_BALLENTRY(CAM_D0, "t8", NULL), + _OMAP2430_BALLENTRY(CAM_D1, "t4", NULL), + _OMAP2430_BALLENTRY(CAM_D10, "r4", NULL), + _OMAP2430_BALLENTRY(CAM_D11, "w3", NULL), + _OMAP2430_BALLENTRY(CAM_D2, "r2", NULL), + _OMAP2430_BALLENTRY(CAM_D3, "u3", NULL), + _OMAP2430_BALLENTRY(CAM_D4, "u2", NULL), + _OMAP2430_BALLENTRY(CAM_D5, "v1", NULL), + _OMAP2430_BALLENTRY(CAM_D6, "t3", NULL), + _OMAP2430_BALLENTRY(CAM_D7, "r3", NULL), + _OMAP2430_BALLENTRY(CAM_D8, "u7", NULL), + _OMAP2430_BALLENTRY(CAM_D9, "t7", NULL), + _OMAP2430_BALLENTRY(CAM_HS, "p2", NULL), + _OMAP2430_BALLENTRY(CAM_LCLK, "r7", NULL), + _OMAP2430_BALLENTRY(CAM_VS, "n2", NULL), + _OMAP2430_BALLENTRY(CAM_XCLK, "p3", NULL), + _OMAP2430_BALLENTRY(DSS_ACBIAS, "y3", NULL), + _OMAP2430_BALLENTRY(DSS_DATA0, "v8", NULL), + _OMAP2430_BALLENTRY(DSS_DATA1, "w1", NULL), + _OMAP2430_BALLENTRY(DSS_DATA10, "k25", NULL), + _OMAP2430_BALLENTRY(DSS_DATA11, "j25", NULL), + _OMAP2430_BALLENTRY(DSS_DATA12, "k24", NULL), + _OMAP2430_BALLENTRY(DSS_DATA13, "j24", NULL), + _OMAP2430_BALLENTRY(DSS_DATA14, "h25", NULL), + _OMAP2430_BALLENTRY(DSS_DATA15, "g25", NULL), + _OMAP2430_BALLENTRY(DSS_DATA16, "ac3", NULL), + _OMAP2430_BALLENTRY(DSS_DATA17, "y7", NULL), + _OMAP2430_BALLENTRY(DSS_DATA2, "u8", NULL), + _OMAP2430_BALLENTRY(DSS_DATA3, "u4", NULL), + _OMAP2430_BALLENTRY(DSS_DATA4, "v3", NULL), + _OMAP2430_BALLENTRY(DSS_DATA5, "aa4", NULL), + _OMAP2430_BALLENTRY(DSS_DATA6, "w8", NULL), + _OMAP2430_BALLENTRY(DSS_DATA7, "y1", NULL), + _OMAP2430_BALLENTRY(DSS_DATA8, "aa2", NULL), + _OMAP2430_BALLENTRY(DSS_DATA9, "ab4", NULL), + _OMAP2430_BALLENTRY(DSS_HSYNC, "v2", NULL), + _OMAP2430_BALLENTRY(GPIO_113, "ad16", NULL), + _OMAP2430_BALLENTRY(GPIO_114, "ac10", NULL), + _OMAP2430_BALLENTRY(GPIO_115, "ad13", NULL), + _OMAP2430_BALLENTRY(GPIO_116, "ae15", NULL), + _OMAP2430_BALLENTRY(GPIO_128, "p1", NULL), + _OMAP2430_BALLENTRY(GPIO_129, "r1", NULL), + _OMAP2430_BALLENTRY(GPIO_130, "p7", NULL), + _OMAP2430_BALLENTRY(GPIO_131, "l8", NULL), + _OMAP2430_BALLENTRY(GPIO_132, "w24", NULL), + _OMAP2430_BALLENTRY(GPIO_133, "aa24", NULL), + _OMAP2430_BALLENTRY(GPIO_134, "ae12", NULL), + _OMAP2430_BALLENTRY(GPIO_135, "ae11", NULL), + _OMAP2430_BALLENTRY(GPIO_136, "ad12", NULL), + _OMAP2430_BALLENTRY(GPIO_137, "ad11", NULL), + _OMAP2430_BALLENTRY(GPIO_138, "y12", NULL), + _OMAP2430_BALLENTRY(GPIO_139, "ad17", NULL), + _OMAP2430_BALLENTRY(GPIO_140, "l7", NULL), + _OMAP2430_BALLENTRY(GPIO_141, "ac24", NULL), + _OMAP2430_BALLENTRY(GPIO_142, "m3", NULL), + _OMAP2430_BALLENTRY(GPIO_148, "af12", NULL), + _OMAP2430_BALLENTRY(GPIO_149, "k7", NULL), + _OMAP2430_BALLENTRY(GPIO_150, "m1", NULL), + _OMAP2430_BALLENTRY(GPIO_151, "ad14", NULL), + _OMAP2430_BALLENTRY(GPIO_152, "ad18", NULL), + _OMAP2430_BALLENTRY(GPIO_153, "u24", NULL), + _OMAP2430_BALLENTRY(GPIO_154, "ae16", NULL), + _OMAP2430_BALLENTRY(GPIO_63, "n3", NULL), + _OMAP2430_BALLENTRY(GPIO_7, "ac23", NULL), + _OMAP2430_BALLENTRY(GPIO_78, "ad10", NULL), + _OMAP2430_BALLENTRY(GPIO_79, "ae10", NULL), + _OMAP2430_BALLENTRY(GPIO_80, "ae13", NULL), + _OMAP2430_BALLENTRY(GPMC_A1, "a9", NULL), + _OMAP2430_BALLENTRY(GPMC_A10, "g12", NULL), + _OMAP2430_BALLENTRY(GPMC_A2, "b8", NULL), + _OMAP2430_BALLENTRY(GPMC_A3, "g10", NULL), + _OMAP2430_BALLENTRY(GPMC_A4, "g11", NULL), + _OMAP2430_BALLENTRY(GPMC_A5, "a10", NULL), + _OMAP2430_BALLENTRY(GPMC_A6, "g13", NULL), + _OMAP2430_BALLENTRY(GPMC_A7, "a6", NULL), + _OMAP2430_BALLENTRY(GPMC_A8, "h1", NULL), + _OMAP2430_BALLENTRY(GPMC_A9, "c8", NULL), + _OMAP2430_BALLENTRY(GPMC_CLK, "n1", "l1"), + _OMAP2430_BALLENTRY(GPMC_D10, "d1", "n1"), + _OMAP2430_BALLENTRY(GPMC_D11, "d2", "p2"), + _OMAP2430_BALLENTRY(GPMC_D12, "e1", "p1"), + _OMAP2430_BALLENTRY(GPMC_D13, "e3", "m1"), + _OMAP2430_BALLENTRY(GPMC_D14, "c7", "j2"), + _OMAP2430_BALLENTRY(GPMC_D15, "f3", "k2"), + _OMAP2430_BALLENTRY(GPMC_D8, "e2", "r1"), + _OMAP2430_BALLENTRY(GPMC_D9, "ab1", "t1"), + _OMAP2430_BALLENTRY(GPMC_NCS1, "ac1", "w1"), + _OMAP2430_BALLENTRY(GPMC_NCS2, "c6", NULL), + _OMAP2430_BALLENTRY(GPMC_NCS3, "b9", NULL), + _OMAP2430_BALLENTRY(GPMC_NCS4, "b4", NULL), + _OMAP2430_BALLENTRY(GPMC_NCS5, "a4", NULL), + _OMAP2430_BALLENTRY(GPMC_NCS6, "f1", NULL), + _OMAP2430_BALLENTRY(GPMC_NCS7, "a7", NULL), + _OMAP2430_BALLENTRY(GPMC_WAIT1, "j1", "y8"), + _OMAP2430_BALLENTRY(GPMC_WAIT2, "b7", NULL), + _OMAP2430_BALLENTRY(GPMC_WAIT3, "g14", NULL), + _OMAP2430_BALLENTRY(HDQ_SIO, "h20", NULL), + _OMAP2430_BALLENTRY(I2C1_SCL, "y17", NULL), + _OMAP2430_BALLENTRY(I2C1_SDA, "ac19", NULL), + _OMAP2430_BALLENTRY(I2C2_SCL, "n7", NULL), + _OMAP2430_BALLENTRY(I2C2_SDA, "m4", NULL), + _OMAP2430_BALLENTRY(JTAG_EMU0, "e25", NULL), + _OMAP2430_BALLENTRY(JTAG_EMU1, "e24", NULL), + _OMAP2430_BALLENTRY(MCBSP1_CLKR, "ab2", NULL), + _OMAP2430_BALLENTRY(MCBSP1_CLKX, "y9", NULL), + _OMAP2430_BALLENTRY(MCBSP1_DR, "af3", NULL), + _OMAP2430_BALLENTRY(MCBSP1_DX, "aa1", NULL), + _OMAP2430_BALLENTRY(MCBSP1_FSR, "ad5", NULL), + _OMAP2430_BALLENTRY(MCBSP1_FSX, "ab3", NULL), + _OMAP2430_BALLENTRY(MCBSP2_CLKX, "j26", NULL), + _OMAP2430_BALLENTRY(MCBSP2_DR, "k26", NULL), + _OMAP2430_BALLENTRY(MCBSP3_CLKX, "ac9", NULL), + _OMAP2430_BALLENTRY(MCBSP3_DR, "ae2", NULL), + _OMAP2430_BALLENTRY(MCBSP3_DX, "af4", NULL), + _OMAP2430_BALLENTRY(MCBSP3_FSX, "ae4", NULL), + _OMAP2430_BALLENTRY(MCBSP_CLKS, "ad6", NULL), + _OMAP2430_BALLENTRY(SDMMC1_CLKO, "n23", NULL), + _OMAP2430_BALLENTRY(SDMMC1_CMD, "l23", NULL), + _OMAP2430_BALLENTRY(SDMMC1_DAT0, "m24", NULL), + _OMAP2430_BALLENTRY(SDMMC1_DAT1, "p23", NULL), + _OMAP2430_BALLENTRY(SDMMC1_DAT2, "t20", NULL), + _OMAP2430_BALLENTRY(SDMMC1_DAT3, "r20", NULL), + _OMAP2430_BALLENTRY(SDMMC2_CLKO, "v26", NULL), + _OMAP2430_BALLENTRY(SDMMC2_CMD, "w20", NULL), + _OMAP2430_BALLENTRY(SDMMC2_DAT0, "v23", NULL), + _OMAP2430_BALLENTRY(SDMMC2_DAT1, "y24", NULL), + _OMAP2430_BALLENTRY(SDMMC2_DAT2, "v25", NULL), + _OMAP2430_BALLENTRY(SDMMC2_DAT3, "v24", NULL), + _OMAP2430_BALLENTRY(SDRC_A12, "w26", "r21"), + _OMAP2430_BALLENTRY(SDRC_A13, "af20", "aa15"), + _OMAP2430_BALLENTRY(SDRC_A14, "af16", "y12"), + _OMAP2430_BALLENTRY(SDRC_CKE1, "af15", "y13"), + _OMAP2430_BALLENTRY(SDRC_NCS1, "aa25", "t20"), + _OMAP2430_BALLENTRY(SPI1_CLK, "y18", NULL), + _OMAP2430_BALLENTRY(SPI1_CS0, "u1", NULL), + _OMAP2430_BALLENTRY(SPI1_CS1, "af19", NULL), + _OMAP2430_BALLENTRY(SPI1_CS2, "ae19", NULL), + _OMAP2430_BALLENTRY(SPI1_CS3, "h24", NULL), + _OMAP2430_BALLENTRY(SPI1_SIMO, "ad15", NULL), + _OMAP2430_BALLENTRY(SPI1_SOMI, "ae17", NULL), + _OMAP2430_BALLENTRY(SPI2_CLK, "y20", NULL), + _OMAP2430_BALLENTRY(SPI2_CS0, "y19", NULL), + _OMAP2430_BALLENTRY(SPI2_SIMO, "ac20", NULL), + _OMAP2430_BALLENTRY(SPI2_SOMI, "ad19", NULL), + _OMAP2430_BALLENTRY(SSI1_DAT_RX, "aa26", NULL), + _OMAP2430_BALLENTRY(SSI1_DAT_TX, "ad24", NULL), + _OMAP2430_BALLENTRY(SSI1_FLAG_RX, "ad23", NULL), + _OMAP2430_BALLENTRY(SSI1_FLAG_TX, "ab24", NULL), + _OMAP2430_BALLENTRY(SSI1_RDY_RX, "ab25", NULL), + _OMAP2430_BALLENTRY(SSI1_RDY_TX, "y25", NULL), + _OMAP2430_BALLENTRY(SSI1_WAKE, "ac25", NULL), + _OMAP2430_BALLENTRY(SYS_CLKOUT, "r25", NULL), + _OMAP2430_BALLENTRY(SYS_DRM_MSECURE, "ae3", NULL), + _OMAP2430_BALLENTRY(SYS_NIRQ0, "w25", NULL), + _OMAP2430_BALLENTRY(SYS_NIRQ1, "ad21", NULL), + _OMAP2430_BALLENTRY(UART1_CTS, "p24", NULL), + _OMAP2430_BALLENTRY(UART1_RTS, "p25", NULL), + _OMAP2430_BALLENTRY(UART1_RX, "n24", NULL), + _OMAP2430_BALLENTRY(UART1_TX, "r24", NULL), + _OMAP2430_BALLENTRY(UART2_CTS, "u25", NULL), + _OMAP2430_BALLENTRY(UART2_RTS, "t23", NULL), + _OMAP2430_BALLENTRY(UART2_RX, "t24", NULL), + _OMAP2430_BALLENTRY(UART2_TX, "u20", NULL), + _OMAP2430_BALLENTRY(UART3_CTS_RCTX, "m2", NULL), + _OMAP2430_BALLENTRY(UART3_RTS_SD, "k2", NULL), + _OMAP2430_BALLENTRY(UART3_RX_IRRX, "l3", NULL), + _OMAP2430_BALLENTRY(UART3_TX_IRTX, "l2", NULL), + _OMAP2430_BALLENTRY(USB0HS_CLK, "ae8", NULL), + _OMAP2430_BALLENTRY(USB0HS_DATA0, "ad4", NULL), + _OMAP2430_BALLENTRY(USB0HS_DATA1, "ae6", NULL), + _OMAP2430_BALLENTRY(USB0HS_DATA2, "af9", NULL), + _OMAP2430_BALLENTRY(USB0HS_DATA3, "ad9", NULL), + _OMAP2430_BALLENTRY(USB0HS_DATA4, "y11", NULL), + _OMAP2430_BALLENTRY(USB0HS_DATA5, "ad7", NULL), + _OMAP2430_BALLENTRY(USB0HS_DATA6, "ae7", NULL), + _OMAP2430_BALLENTRY(USB0HS_DATA7, "ac7", NULL), + _OMAP2430_BALLENTRY(USB0HS_DIR, "ad8", NULL), + _OMAP2430_BALLENTRY(USB0HS_NXT, "ae9", NULL), + _OMAP2430_BALLENTRY(USB0HS_STP, "ae5", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap2430_pop_ball NULL +#endif + +int __init omap2430_mux_init(struct omap_board_mux *board_subset, int flags) +{ + struct omap_ball *package_balls = NULL; + + switch (flags & OMAP_PACKAGE_MASK) { + case OMAP_PACKAGE_ZAC: + package_balls = omap2430_pop_ball; + break; + default: + pr_warning("mux: No ball data available for omap2420 package\n"); + } + + return omap_mux_init(OMAP2430_CONTROL_PADCONF_MUX_PBASE, + OMAP2430_CONTROL_PADCONF_MUX_SIZE, + omap2430_muxmodes, NULL, board_subset, + package_balls); +} diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h new file mode 100644 index 000000000000..adbea0d03e08 --- /dev/null +++ b/arch/arm/mach-omap2/mux2430.h @@ -0,0 +1,370 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP2430_CONTROL_PADCONF_MUX_PBASE 0x49002030LU + +#define OMAP2430_MUX(mode0, mux_value) \ +{ \ + .reg_offset = (OMAP2430_CONTROL_PADCONF_##mode0##_OFFSET), \ + .value = (mux_value), \ +} + +/* + * OMAP2430 CONTROL_PADCONF* register offsets for pin-muxing + * + * Extracted from the TRM. Add 0x49002030 to these values to get the + * absolute addresses. The name in the macro is the mode-0 name of + * the pin. NOTE: These registers are 8-bits wide. + * + * Note that these defines use SDMMC instead of MMC for compability + * with signal names used in 3630. + */ +#define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x000 +#define OMAP2430_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x001 +#define OMAP2430_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x002 +#define OMAP2430_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x003 +#define OMAP2430_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x004 +#define OMAP2430_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x005 +#define OMAP2430_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x006 +#define OMAP2430_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x007 +#define OMAP2430_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x008 +#define OMAP2430_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x009 +#define OMAP2430_CONTROL_PADCONF_GPMC_NOE_NRE_OFFSET 0x00a +#define OMAP2430_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x00b +#define OMAP2430_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x00c +#define OMAP2430_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x00d +#define OMAP2430_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x00e +#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x00f +#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x010 +#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x011 +#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x012 +#define OMAP2430_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x013 +#define OMAP2430_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x014 +#define OMAP2430_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x015 +#define OMAP2430_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x016 +#define OMAP2430_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x017 +#define OMAP2430_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x018 +#define OMAP2430_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x019 +#define OMAP2430_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x01a +#define OMAP2430_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x01b +#define OMAP2430_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x01c +#define OMAP2430_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x01d +#define OMAP2430_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x01e +#define OMAP2430_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x01f +#define OMAP2430_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x020 +#define OMAP2430_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x021 +#define OMAP2430_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x022 +#define OMAP2430_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x023 +#define OMAP2430_CONTROL_PADCONF_SDRC_A14_OFFSET 0x024 +#define OMAP2430_CONTROL_PADCONF_SDRC_A13_OFFSET 0x025 +#define OMAP2430_CONTROL_PADCONF_SDRC_A12_OFFSET 0x026 +#define OMAP2430_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x027 +#define OMAP2430_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x028 +#define OMAP2430_CONTROL_PADCONF_SDRC_A11_OFFSET 0x029 +#define OMAP2430_CONTROL_PADCONF_SDRC_A10_OFFSET 0x02a +#define OMAP2430_CONTROL_PADCONF_SDRC_A9_OFFSET 0x02b +#define OMAP2430_CONTROL_PADCONF_SDRC_A8_OFFSET 0x02c +#define OMAP2430_CONTROL_PADCONF_SDRC_A7_OFFSET 0x02d +#define OMAP2430_CONTROL_PADCONF_SDRC_A6_OFFSET 0x02e +#define OMAP2430_CONTROL_PADCONF_SDRC_A5_OFFSET 0x02f +#define OMAP2430_CONTROL_PADCONF_SDRC_A4_OFFSET 0x030 +#define OMAP2430_CONTROL_PADCONF_SDRC_A3_OFFSET 0x031 +#define OMAP2430_CONTROL_PADCONF_SDRC_A2_OFFSET 0x032 +#define OMAP2430_CONTROL_PADCONF_SDRC_A1_OFFSET 0x033 +#define OMAP2430_CONTROL_PADCONF_SDRC_A0_OFFSET 0x034 +#define OMAP2430_CONTROL_PADCONF_SDRC_D31_OFFSET 0x035 +#define OMAP2430_CONTROL_PADCONF_SDRC_D30_OFFSET 0x036 +#define OMAP2430_CONTROL_PADCONF_SDRC_D29_OFFSET 0x037 +#define OMAP2430_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038 +#define OMAP2430_CONTROL_PADCONF_SDRC_D27_OFFSET 0x039 +#define OMAP2430_CONTROL_PADCONF_SDRC_D26_OFFSET 0x03a +#define OMAP2430_CONTROL_PADCONF_SDRC_D25_OFFSET 0x03b +#define OMAP2430_CONTROL_PADCONF_SDRC_D24_OFFSET 0x03c +#define OMAP2430_CONTROL_PADCONF_SDRC_D23_OFFSET 0x03d +#define OMAP2430_CONTROL_PADCONF_SDRC_D22_OFFSET 0x03e +#define OMAP2430_CONTROL_PADCONF_SDRC_D21_OFFSET 0x03f +#define OMAP2430_CONTROL_PADCONF_SDRC_D20_OFFSET 0x040 +#define OMAP2430_CONTROL_PADCONF_SDRC_D19_OFFSET 0x041 +#define OMAP2430_CONTROL_PADCONF_SDRC_D18_OFFSET 0x042 +#define OMAP2430_CONTROL_PADCONF_SDRC_D17_OFFSET 0x043 +#define OMAP2430_CONTROL_PADCONF_SDRC_D16_OFFSET 0x044 +#define OMAP2430_CONTROL_PADCONF_SDRC_D15_OFFSET 0x045 +#define OMAP2430_CONTROL_PADCONF_SDRC_D14_OFFSET 0x046 +#define OMAP2430_CONTROL_PADCONF_SDRC_D13_OFFSET 0x047 +#define OMAP2430_CONTROL_PADCONF_SDRC_D12_OFFSET 0x048 +#define OMAP2430_CONTROL_PADCONF_SDRC_D11_OFFSET 0x049 +#define OMAP2430_CONTROL_PADCONF_SDRC_D10_OFFSET 0x04a +#define OMAP2430_CONTROL_PADCONF_SDRC_D9_OFFSET 0x04b +#define OMAP2430_CONTROL_PADCONF_SDRC_D8_OFFSET 0x04c +#define OMAP2430_CONTROL_PADCONF_SDRC_D7_OFFSET 0x04d +#define OMAP2430_CONTROL_PADCONF_SDRC_D6_OFFSET 0x04e +#define OMAP2430_CONTROL_PADCONF_SDRC_D5_OFFSET 0x04f +#define OMAP2430_CONTROL_PADCONF_SDRC_D4_OFFSET 0x050 +#define OMAP2430_CONTROL_PADCONF_SDRC_D3_OFFSET 0x051 +#define OMAP2430_CONTROL_PADCONF_SDRC_D2_OFFSET 0x052 +#define OMAP2430_CONTROL_PADCONF_SDRC_D1_OFFSET 0x053 +#define OMAP2430_CONTROL_PADCONF_SDRC_D0_OFFSET 0x054 +#define OMAP2430_CONTROL_PADCONF_GPMC_A10_OFFSET 0x055 +#define OMAP2430_CONTROL_PADCONF_GPMC_A9_OFFSET 0x056 +#define OMAP2430_CONTROL_PADCONF_GPMC_A8_OFFSET 0x057 +#define OMAP2430_CONTROL_PADCONF_GPMC_A7_OFFSET 0x058 +#define OMAP2430_CONTROL_PADCONF_GPMC_A6_OFFSET 0x059 +#define OMAP2430_CONTROL_PADCONF_GPMC_A5_OFFSET 0x05a +#define OMAP2430_CONTROL_PADCONF_GPMC_A4_OFFSET 0x05b +#define OMAP2430_CONTROL_PADCONF_GPMC_A3_OFFSET 0x05c +#define OMAP2430_CONTROL_PADCONF_GPMC_A2_OFFSET 0x05d +#define OMAP2430_CONTROL_PADCONF_GPMC_A1_OFFSET 0x05e +#define OMAP2430_CONTROL_PADCONF_GPMC_D15_OFFSET 0x05f +#define OMAP2430_CONTROL_PADCONF_GPMC_D14_OFFSET 0x060 +#define OMAP2430_CONTROL_PADCONF_GPMC_D13_OFFSET 0x061 +#define OMAP2430_CONTROL_PADCONF_GPMC_D12_OFFSET 0x062 +#define OMAP2430_CONTROL_PADCONF_GPMC_D11_OFFSET 0x063 +#define OMAP2430_CONTROL_PADCONF_GPMC_D10_OFFSET 0x064 +#define OMAP2430_CONTROL_PADCONF_GPMC_D9_OFFSET 0x065 +#define OMAP2430_CONTROL_PADCONF_GPMC_D8_OFFSET 0x066 +#define OMAP2430_CONTROL_PADCONF_GPMC_D7_OFFSET 0x067 +#define OMAP2430_CONTROL_PADCONF_GPMC_D6_OFFSET 0x068 +#define OMAP2430_CONTROL_PADCONF_GPMC_D5_OFFSET 0x069 +#define OMAP2430_CONTROL_PADCONF_GPMC_D4_OFFSET 0x06a +#define OMAP2430_CONTROL_PADCONF_GPMC_D3_OFFSET 0x06b +#define OMAP2430_CONTROL_PADCONF_GPMC_D2_OFFSET 0x06c +#define OMAP2430_CONTROL_PADCONF_GPMC_D1_OFFSET 0x06d +#define OMAP2430_CONTROL_PADCONF_GPMC_D0_OFFSET 0x06e +#define OMAP2430_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x06f +#define OMAP2430_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x070 +#define OMAP2430_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x071 +#define OMAP2430_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x072 +#define OMAP2430_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x073 +#define OMAP2430_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x074 +#define OMAP2430_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x075 +#define OMAP2430_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x076 +#define OMAP2430_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x077 +#define OMAP2430_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x078 +#define OMAP2430_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x079 +#define OMAP2430_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x07a +#define OMAP2430_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x07b +#define OMAP2430_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x07c +#define OMAP2430_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x07d +#define OMAP2430_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x07e +#define OMAP2430_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x07f +#define OMAP2430_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x080 +#define OMAP2430_CONTROL_PADCONF_UART1_CTS_OFFSET 0x081 +#define OMAP2430_CONTROL_PADCONF_UART1_RTS_OFFSET 0x082 +#define OMAP2430_CONTROL_PADCONF_UART1_TX_OFFSET 0x083 +#define OMAP2430_CONTROL_PADCONF_UART1_RX_OFFSET 0x084 +#define OMAP2430_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x085 +#define OMAP2430_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x086 +#define OMAP2430_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x087 +#define OMAP2430_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x088 +#define OMAP2430_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x089 +#define OMAP2430_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x08a +#define OMAP2430_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET 0x08b +#define OMAP2430_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x08c +#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ0_OFFSET 0x08d +#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ1_OFFSET 0x08e +#define OMAP2430_CONTROL_PADCONF_SYS_VMODE_OFFSET 0x08f +#define OMAP2430_CONTROL_PADCONF_GPIO_128_OFFSET 0x090 +#define OMAP2430_CONTROL_PADCONF_GPIO_129_OFFSET 0x091 +#define OMAP2430_CONTROL_PADCONF_GPIO_130_OFFSET 0x092 +#define OMAP2430_CONTROL_PADCONF_GPIO_131_OFFSET 0x093 +#define OMAP2430_CONTROL_PADCONF_SYS_32K_OFFSET 0x094 +#define OMAP2430_CONTROL_PADCONF_SYS_XTALIN_OFFSET 0x095 +#define OMAP2430_CONTROL_PADCONF_SYS_XTALOUT_OFFSET 0x096 +#define OMAP2430_CONTROL_PADCONF_GPIO_132_OFFSET 0x097 +#define OMAP2430_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x098 +#define OMAP2430_CONTROL_PADCONF_SYS_CLKOUT_OFFSET 0x099 +#define OMAP2430_CONTROL_PADCONF_GPIO_151_OFFSET 0x09a +#define OMAP2430_CONTROL_PADCONF_GPIO_133_OFFSET 0x09b +#define OMAP2430_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x09c +#define OMAP2430_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x09d +#define OMAP2430_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x09e +#define OMAP2430_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x09f +#define OMAP2430_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0x0a0 +#define OMAP2430_CONTROL_PADCONF_JTAG_TMS_OFFSET 0x0a1 +#define OMAP2430_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x0a2 +#define OMAP2430_CONTROL_PADCONF_JTAG_TDO_OFFSET 0x0a3 +#define OMAP2430_CONTROL_PADCONF_CAM_D9_OFFSET 0x0a4 +#define OMAP2430_CONTROL_PADCONF_CAM_D8_OFFSET 0x0a5 +#define OMAP2430_CONTROL_PADCONF_CAM_D7_OFFSET 0x0a6 +#define OMAP2430_CONTROL_PADCONF_CAM_D6_OFFSET 0x0a7 +#define OMAP2430_CONTROL_PADCONF_CAM_D5_OFFSET 0x0a8 +#define OMAP2430_CONTROL_PADCONF_CAM_D4_OFFSET 0x0a9 +#define OMAP2430_CONTROL_PADCONF_CAM_D3_OFFSET 0x0aa +#define OMAP2430_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ab +#define OMAP2430_CONTROL_PADCONF_CAM_D1_OFFSET 0x0ac +#define OMAP2430_CONTROL_PADCONF_CAM_D0_OFFSET 0x0ad +#define OMAP2430_CONTROL_PADCONF_CAM_HS_OFFSET 0x0ae +#define OMAP2430_CONTROL_PADCONF_CAM_VS_OFFSET 0x0af +#define OMAP2430_CONTROL_PADCONF_CAM_LCLK_OFFSET 0x0b0 +#define OMAP2430_CONTROL_PADCONF_CAM_XCLK_OFFSET 0x0b1 +#define OMAP2430_CONTROL_PADCONF_CAM_D11_OFFSET 0x0b2 +#define OMAP2430_CONTROL_PADCONF_CAM_D10_OFFSET 0x0b3 +#define OMAP2430_CONTROL_PADCONF_GPIO_134_OFFSET 0x0b4 +#define OMAP2430_CONTROL_PADCONF_GPIO_135_OFFSET 0x0b5 +#define OMAP2430_CONTROL_PADCONF_GPIO_136_OFFSET 0x0b6 +#define OMAP2430_CONTROL_PADCONF_GPIO_137_OFFSET 0x0b7 +#define OMAP2430_CONTROL_PADCONF_GPIO_138_OFFSET 0x0b8 +#define OMAP2430_CONTROL_PADCONF_GPIO_139_OFFSET 0x0b9 +#define OMAP2430_CONTROL_PADCONF_GPIO_140_OFFSET 0x0ba +#define OMAP2430_CONTROL_PADCONF_GPIO_141_OFFSET 0x0bb +#define OMAP2430_CONTROL_PADCONF_GPIO_142_OFFSET 0x0bc +#define OMAP2430_CONTROL_PADCONF_GPIO_154_OFFSET 0x0bd +#define OMAP2430_CONTROL_PADCONF_GPIO_148_OFFSET 0x0be +#define OMAP2430_CONTROL_PADCONF_GPIO_149_OFFSET 0x0bf +#define OMAP2430_CONTROL_PADCONF_GPIO_150_OFFSET 0x0c0 +#define OMAP2430_CONTROL_PADCONF_GPIO_152_OFFSET 0x0c1 +#define OMAP2430_CONTROL_PADCONF_GPIO_153_OFFSET 0x0c2 +#define OMAP2430_CONTROL_PADCONF_SDMMC1_CLKO_OFFSET 0x0c3 +#define OMAP2430_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x0c4 +#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x0c5 +#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x0c6 +#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x0c7 +#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x0c8 +#define OMAP2430_CONTROL_PADCONF_SDMMC2_CLKO_OFFSET 0x0c9 +#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x0ca +#define OMAP2430_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x0cb +#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x0cc +#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x0cd +#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x0ce +#define OMAP2430_CONTROL_PADCONF_UART2_CTS_OFFSET 0x0cf +#define OMAP2430_CONTROL_PADCONF_UART2_RTS_OFFSET 0x0d0 +#define OMAP2430_CONTROL_PADCONF_UART2_TX_OFFSET 0x0d1 +#define OMAP2430_CONTROL_PADCONF_UART2_RX_OFFSET 0x0d2 +#define OMAP2430_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x0d3 +#define OMAP2430_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x0d4 +#define OMAP2430_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x0d5 +#define OMAP2430_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x0d6 +#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET 0x0d7 +#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET 0x0d8 +#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET 0x0d9 +#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET 0x0da +#define OMAP2430_CONTROL_PADCONF_GPIO_63_OFFSET 0x0db +#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET 0x0dc +#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET 0x0dd +#define OMAP2430_CONTROL_PADCONF_SSI1_WAKE_OFFSET 0x0de +#define OMAP2430_CONTROL_PADCONF_SPI1_CLK_OFFSET 0x0df +#define OMAP2430_CONTROL_PADCONF_SPI1_SIMO_OFFSET 0x0e0 +#define OMAP2430_CONTROL_PADCONF_SPI1_SOMI_OFFSET 0x0e1 +#define OMAP2430_CONTROL_PADCONF_SPI1_CS0_OFFSET 0x0e2 +#define OMAP2430_CONTROL_PADCONF_SPI1_CS1_OFFSET 0x0e3 +#define OMAP2430_CONTROL_PADCONF_SPI1_CS2_OFFSET 0x0e4 +#define OMAP2430_CONTROL_PADCONF_SPI1_CS3_OFFSET 0x0e5 +#define OMAP2430_CONTROL_PADCONF_SPI2_CLK_OFFSET 0x0e6 +#define OMAP2430_CONTROL_PADCONF_SPI2_SIMO_OFFSET 0x0e7 +#define OMAP2430_CONTROL_PADCONF_SPI2_SOMI_OFFSET 0x0e8 +#define OMAP2430_CONTROL_PADCONF_SPI2_CS0_OFFSET 0x0e9 +#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x0ea +#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x0eb +#define OMAP2430_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x0ec +#define OMAP2430_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x0ed +#define OMAP2430_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x0ee +#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x0ef +#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x0f0 +#define OMAP2430_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x0f1 +#define OMAP2430_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x0f2 +#define OMAP2430_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x0f3 +#define OMAP2430_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x0f4 +#define OMAP2430_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x0f5 +#define OMAP2430_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x0f6 +#define OMAP2430_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x0f7 +#define OMAP2430_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x0f8 +#define OMAP2430_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x0f9 +#define OMAP2430_CONTROL_PADCONF_GPIO_7_OFFSET 0x0fa +#define OMAP2430_CONTROL_PADCONF_GPIO_78_OFFSET 0x0fb +#define OMAP2430_CONTROL_PADCONF_GPIO_79_OFFSET 0x0fc +#define OMAP2430_CONTROL_PADCONF_GPIO_80_OFFSET 0x0fd +#define OMAP2430_CONTROL_PADCONF_GPIO_113_OFFSET 0x0fe +#define OMAP2430_CONTROL_PADCONF_GPIO_114_OFFSET 0x0ff +#define OMAP2430_CONTROL_PADCONF_GPIO_115_OFFSET 0x100 +#define OMAP2430_CONTROL_PADCONF_GPIO_116_OFFSET 0x101 +#define OMAP2430_CONTROL_PADCONF_SYS_DRM_MSECURE_OFFSET 0x102 +#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA3_OFFSET 0x103 +#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA4_OFFSET 0x104 +#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA5_OFFSET 0x105 +#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA6_OFFSET 0x106 +#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA2_OFFSET 0x107 +#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA0_OFFSET 0x108 +#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA1_OFFSET 0x109 +#define OMAP2430_CONTROL_PADCONF_USB0HS_CLK_OFFSET 0x10a +#define OMAP2430_CONTROL_PADCONF_USB0HS_DIR_OFFSET 0x10b +#define OMAP2430_CONTROL_PADCONF_USB0HS_STP_OFFSET 0x10c +#define OMAP2430_CONTROL_PADCONF_USB0HS_NXT_OFFSET 0x10d +#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA7_OFFSET 0x10e +#define OMAP2430_CONTROL_PADCONF_TV_OUT_OFFSET 0x10f +#define OMAP2430_CONTROL_PADCONF_TV_VREF_OFFSET 0x110 +#define OMAP2430_CONTROL_PADCONF_TV_RSET_OFFSET 0x111 +#define OMAP2430_CONTROL_PADCONF_TV_VFB_OFFSET 0x112 +#define OMAP2430_CONTROL_PADCONF_TV_DACOUT_OFFSET 0x113 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD0_OFFSET 0x114 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD1_OFFSET 0x115 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD2_OFFSET 0x116 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD3_OFFSET 0x117 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD4_OFFSET 0x118 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD5_OFFSET 0x119 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD6_OFFSET 0x11a +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD7_OFFSET 0x11b +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD8_OFFSET 0x11c +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD9_OFFSET 0x11d +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD10_OFFSET 0x11e +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD11_OFFSET 0x11f +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD12_OFFSET 0x120 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD13_OFFSET 0x121 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD14_OFFSET 0x122 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD15_OFFSET 0x123 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD16_OFFSET 0x124 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD17_OFFSET 0x125 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD18_OFFSET 0x126 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD19_OFFSET 0x127 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD20_OFFSET 0x128 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD21_OFFSET 0x129 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD22_OFFSET 0x12a +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD23_OFFSET 0x12b +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD24_OFFSET 0x12c +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD25_OFFSET 0x12d +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD26_OFFSET 0x12e +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD27_OFFSET 0x12f +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD28_OFFSET 0x130 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD29_OFFSET 0x131 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD30_OFFSET 0x132 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD31_OFFSET 0x133 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD32_OFFSET 0x134 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD33_OFFSET 0x135 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD34_OFFSET 0x136 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD35_OFFSET 0x137 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD36_OFFSET 0x138 +#define OMAP2430_CONTROL_PADCONF_AD2DMCAD37_OFFSET 0x139 +#define OMAP2430_CONTROL_PADCONF_AD2DMWRITE_OFFSET 0x13a +#define OMAP2430_CONTROL_PADCONF_D2DCLK26MI_OFFSET 0x13b +#define OMAP2430_CONTROL_PADCONF_D2DNRESPWRON1_OFFSET 0x13c +#define OMAP2430_CONTROL_PADCONF_D2DNRESWARM_OFFSET 0x13d +#define OMAP2430_CONTROL_PADCONF_D2DARM9NIRQ_OFFSET 0x13e +#define OMAP2430_CONTROL_PADCONF_D2DUMA2P6FIQ_OFFSET 0x13f +#define OMAP2430_CONTROL_PADCONF_D2DSPINT_OFFSET 0x140 +#define OMAP2430_CONTROL_PADCONF_D2DFRINT_OFFSET 0x141 +#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ0_OFFSET 0x142 +#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ1_OFFSET 0x143 +#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ2_OFFSET 0x144 +#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ3_OFFSET 0x145 +#define OMAP2430_CONTROL_PADCONF_D2DN3GTRST_OFFSET 0x146 +#define OMAP2430_CONTROL_PADCONF_D2DN3GTDI_OFFSET 0x147 +#define OMAP2430_CONTROL_PADCONF_D2DN3GTDO_OFFSET 0x148 +#define OMAP2430_CONTROL_PADCONF_D2DN3GTMS_OFFSET 0x149 +#define OMAP2430_CONTROL_PADCONF_D2DN3GTCK_OFFSET 0x14a +#define OMAP2430_CONTROL_PADCONF_D2DN3GRTCK_OFFSET 0x14b +#define OMAP2430_CONTROL_PADCONF_D2DMSTDBY_OFFSET 0x14c +#define OMAP2430_CONTROL_PADCONF_AD2DSREAD_OFFSET 0x14d +#define OMAP2430_CONTROL_PADCONF_D2DSWAKEUP_OFFSET 0x14e +#define OMAP2430_CONTROL_PADCONF_D2DIDLEREQ_OFFSET 0x14f +#define OMAP2430_CONTROL_PADCONF_D2DIDLEACK_OFFSET 0x150 +#define OMAP2430_CONTROL_PADCONF_D2DSPARE0_OFFSET 0x151 +#define OMAP2430_CONTROL_PADCONF_AD2DSWRITE_OFFSET 0x152 +#define OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET 0x153 + +#define OMAP2430_CONTROL_PADCONF_MUX_SIZE \ + (OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET + 0x1) diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 2ff4dce95ee8..f64d7eea3451 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -2032,19 +2032,19 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) struct omap_ball *package_balls; switch (flags & OMAP_PACKAGE_MASK) { - case (OMAP_PACKAGE_CBC): + case OMAP_PACKAGE_CBC: package_subset = omap3_cbc_subset; package_balls = omap3_cbc_ball; break; - case (OMAP_PACKAGE_CBB): + case OMAP_PACKAGE_CBB: package_subset = omap3_cbb_subset; package_balls = omap3_cbb_ball; break; - case (OMAP_PACKAGE_CUS): + case OMAP_PACKAGE_CUS: package_subset = omap3_cus_subset; package_balls = omap3_cus_ball; break; - case (OMAP_PACKAGE_CBP): + case OMAP_PACKAGE_CBP: package_subset = omap36xx_cbp_subset; package_balls = omap36xx_cbp_ball; break; diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index ef0e7a00dd6c..6ae937a06cc1 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -47,19 +47,3 @@ hold: ldr r12,=0x103 b secondary_startup END(omap_secondary_startup) - -ENTRY(omap_modify_auxcoreboot0) - stmfd sp!, {r1-r12, lr} - ldr r12, =0x104 - dsb - smc #0 - ldmfd sp!, {r1-r12, pc} -END(omap_modify_auxcoreboot0) - -ENTRY(omap_auxcoreboot_addr) - stmfd sp!, {r2-r12, lr} - ldr r12, =0x105 - dsb - smc #0 - ldmfd sp!, {r2-r12, pc} -END(omap_auxcoreboot_addr) diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c new file mode 100644 index 000000000000..6cee456ca542 --- /dev/null +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -0,0 +1,79 @@ +/* + * OMAP4 SMP cpu-hotplug support + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Author: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Platform file needed for the OMAP4 SMP. This file is based on arm + * realview smp platform. + * Copyright (c) 2002 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> +#include <linux/completion.h> + +#include <asm/cacheflush.h> +#include <mach/omap4-common.h> + +static DECLARE_COMPLETION(cpu_killed); + +int platform_cpu_kill(unsigned int cpu) +{ + return wait_for_completion_timeout(&cpu_killed, 5000); +} + +/* + * platform-specific code to shutdown a CPU + * Called with IRQs disabled + */ +void platform_cpu_die(unsigned int cpu) +{ + unsigned int this_cpu = hard_smp_processor_id(); + + if (cpu != this_cpu) { + pr_crit("platform_cpu_die running on %u, should be %u\n", + this_cpu, cpu); + BUG(); + } + pr_notice("CPU%u: shutdown\n", cpu); + complete(&cpu_killed); + flush_cache_all(); + dsb(); + + /* + * we're ready for shutdown now, so do it + */ + if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0) + printk(KERN_CRIT "Secure clear status failed\n"); + + for (;;) { + /* + * Execute WFI + */ + do_wfi(); + + if (omap_read_auxcoreboot0() == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + pr_debug("CPU%u: spurious wakeup call\n", cpu); + } +} + +int platform_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index eb9bee73e0cb..f5a1aad1a5c0 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -59,7 +59,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES]; static struct iommu_device omap4_devices[] = { { .base = OMAP4_MMU1_BASE, - .irq = INT_44XX_DUCATI_MMU_IRQ, + .irq = OMAP44XX_IRQ_DUCATI_MMU, .pdata = { .name = "ducati", .nr_tlb_entries = 32, diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 1cf52313759e..af3c20c8d3f9 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -73,9 +73,10 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - omap_modify_auxcoreboot0(0x200, 0x0); + omap_modify_auxcoreboot0(0x200, 0xfffffdff); flush_cache_all(); smp_wmb(); + smp_cross_call(cpumask_of(cpu)); /* * Now the secondary core is starting up let it run its diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S index f61c7771ca47..1980dc31a1a2 100644 --- a/arch/arm/mach-omap2/omap44xx-smc.S +++ b/arch/arm/mach-omap2/omap44xx-smc.S @@ -30,3 +30,28 @@ ENTRY(omap_smc1) smc #0 ldmfd sp!, {r2-r12, pc} END(omap_smc1) + +ENTRY(omap_modify_auxcoreboot0) + stmfd sp!, {r1-r12, lr} + ldr r12, =0x104 + dsb + smc #0 + ldmfd sp!, {r1-r12, pc} +END(omap_modify_auxcoreboot0) + +ENTRY(omap_auxcoreboot_addr) + stmfd sp!, {r2-r12, lr} + ldr r12, =0x105 + dsb + smc #0 + ldmfd sp!, {r2-r12, pc} +END(omap_auxcoreboot_addr) + +ENTRY(omap_read_auxcoreboot0) + stmfd sp!, {r2-r12, lr} + ldr r12, =0x103 + dsb + smc #0 + mov r0, r0, lsr #9 + ldmfd sp!, {r2-r12, pc} +END(omap_read_auxcoreboot0) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b7a4133267d8..cb911d7d1a3c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1,7 +1,7 @@ /* * omap_hwmod implementation for OMAP2/3/4 * - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley, Benoît Cousson, Kevin Hilman * @@ -423,7 +423,7 @@ static int _init_main_clk(struct omap_hwmod *oh) } /** - * _init_interface_clk - get a struct clk * for the the hwmod's interface clks + * _init_interface_clks - get a struct clk * for the the hwmod's interface clks * @oh: struct omap_hwmod * * * Called from _init_clocks(). Populates the @oh OCP slave interface @@ -764,6 +764,7 @@ static struct omap_hwmod *_lookup(const char *name) /** * _init_clocks - clk_get() all clocks associated with this hwmod * @oh: struct omap_hwmod * + * @data: not used; pass NULL * * Called by omap_hwmod_late_init() (after omap2_clk_init()). * Resolves all clock names embedded in the hwmod. Must be called @@ -771,7 +772,7 @@ static struct omap_hwmod *_lookup(const char *name) * has not yet been registered or if the clocks have already been * initialized, 0 on success, or a non-zero error on failure. */ -static int _init_clocks(struct omap_hwmod *oh) +static int _init_clocks(struct omap_hwmod *oh, void *data) { int ret = 0; @@ -886,7 +887,7 @@ static int _reset(struct omap_hwmod *oh) } /** - * _enable - enable an omap_hwmod + * _omap_hwmod_enable - enable an omap_hwmod * @oh: struct omap_hwmod * * * Enables an omap_hwmod @oh such that the MPU can access the hwmod's @@ -894,7 +895,7 @@ static int _reset(struct omap_hwmod *oh) * Returns -EINVAL if the hwmod is in the wrong state or passes along * the return value of _wait_target_ready(). */ -static int _enable(struct omap_hwmod *oh) +int _omap_hwmod_enable(struct omap_hwmod *oh) { int r; @@ -939,7 +940,7 @@ static int _enable(struct omap_hwmod *oh) * no further work. Returns -EINVAL if the hwmod is in the wrong * state or returns 0. */ -static int _idle(struct omap_hwmod *oh) +int _omap_hwmod_idle(struct omap_hwmod *oh) { if (oh->_state != _HWMOD_STATE_ENABLED) { WARN(1, "omap_hwmod: %s: idle state can only be entered from " @@ -996,19 +997,25 @@ static int _shutdown(struct omap_hwmod *oh) /** * _setup - do initial configuration of omap_hwmod * @oh: struct omap_hwmod * + * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1 * * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex - * held. Returns -EINVAL if the hwmod is in the wrong state or returns - * 0. + * OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex held. + * @skip_setup_idle is intended to be used on a system that will not + * call omap_hwmod_enable() to enable devices (e.g., a system without + * PM runtime). Returns -EINVAL if the hwmod is in the wrong state or + * returns 0. */ -static int _setup(struct omap_hwmod *oh) +static int _setup(struct omap_hwmod *oh, void *data) { int i, r; + u8 skip_setup_idle; - if (!oh) + if (!oh || !data) return -EINVAL; + skip_setup_idle = *(u8 *)data; + /* Set iclk autoidle mode */ if (oh->slaves_cnt > 0) { for (i = 0; i < oh->slaves_cnt; i++) { @@ -1029,7 +1036,7 @@ static int _setup(struct omap_hwmod *oh) oh->_state = _HWMOD_STATE_INITIALIZED; - r = _enable(oh); + r = _omap_hwmod_enable(oh); if (r) { pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n", oh->name, oh->_state); @@ -1041,7 +1048,7 @@ static int _setup(struct omap_hwmod *oh) * XXX Do the OCP_SYSCONFIG bits need to be * reprogrammed after a reset? If not, then this can * be removed. If they do, then probably the - * _enable() function should be split to avoid the + * _omap_hwmod_enable() function should be split to avoid the * rewrite of the OCP_SYSCONFIG register. */ if (oh->class->sysc) { @@ -1050,8 +1057,8 @@ static int _setup(struct omap_hwmod *oh) } } - if (!(oh->flags & HWMOD_INIT_NO_IDLE)) - _idle(oh); + if (!(oh->flags & HWMOD_INIT_NO_IDLE) && !skip_setup_idle) + _omap_hwmod_idle(oh); return 0; } @@ -1062,14 +1069,29 @@ static int _setup(struct omap_hwmod *oh) u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs) { - return __raw_readl(oh->_rt_va + reg_offs); + return __raw_readl(oh->_mpu_rt_va + reg_offs); } void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs) { - __raw_writel(v, oh->_rt_va + reg_offs); + __raw_writel(v, oh->_mpu_rt_va + reg_offs); } +/** + * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode + * @oh: struct omap_hwmod * + * @idlemode: SIDLEMODE field bits (shifted to bit 0) + * + * Sets the IP block's OCP slave idlemode in hardware, and updates our + * local copy. Intended to be used by drivers that have some erratum + * that requires direct manipulation of the SIDLEMODE bits. Returns + * -EINVAL if @oh is null, or passes along the return value from + * _set_slave_idlemode(). + * + * XXX Does this function have any current users? If not, we should + * remove it; it is better to let the rest of the hwmod code handle this. + * Any users of this function should be scrutinized carefully. + */ int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) { u32 v; @@ -1124,7 +1146,7 @@ int omap_hwmod_register(struct omap_hwmod *oh) ms_id = _find_mpu_port_index(oh); if (!IS_ERR_VALUE(ms_id)) { oh->_mpu_port_index = ms_id; - oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); + oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); } else { oh->_int_flags |= _HWMOD_NO_MPU_PORT; } @@ -1164,6 +1186,7 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name) /** * omap_hwmod_for_each - call function for each registered omap_hwmod * @fn: pointer to a callback function + * @data: void * data to pass to callback function * * Call @fn for each registered omap_hwmod, passing @data to each * function. @fn must return 0 for success or any other value for @@ -1172,7 +1195,8 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name) * caller of omap_hwmod_for_each(). @fn is called with * omap_hwmod_for_each() held. */ -int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)) +int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), + void *data) { struct omap_hwmod *temp_oh; int ret; @@ -1182,7 +1206,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)) mutex_lock(&omap_hwmod_mutex); list_for_each_entry(temp_oh, &omap_hwmod_list, node) { - ret = (*fn)(temp_oh); + ret = (*fn)(temp_oh, data); if (ret) break; } @@ -1229,24 +1253,28 @@ int omap_hwmod_init(struct omap_hwmod **ohs) /** * omap_hwmod_late_init - do some post-clock framework initialization + * @skip_setup_idle: if 1, do not idle hwmods in _setup() * * Must be called after omap2_clk_init(). Resolves the struct clk names * to struct clk pointers for each registered omap_hwmod. Also calls * _setup() on each hwmod. Returns 0. */ -int omap_hwmod_late_init(void) +int omap_hwmod_late_init(u8 skip_setup_idle) { int r; /* XXX check return value */ - r = omap_hwmod_for_each(_init_clocks); + r = omap_hwmod_for_each(_init_clocks, NULL); WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n"); mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME); WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n", MPU_INITIATOR_NAME); - omap_hwmod_for_each(_setup); + if (skip_setup_idle) + pr_debug("omap_hwmod: will leave hwmods enabled during setup\n"); + + omap_hwmod_for_each(_setup, &skip_setup_idle); return 0; } @@ -1270,7 +1298,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: unregistering\n", oh->name); mutex_lock(&omap_hwmod_mutex); - iounmap(oh->_rt_va); + iounmap(oh->_mpu_rt_va); list_del(&oh->node); mutex_unlock(&omap_hwmod_mutex); @@ -1292,12 +1320,13 @@ int omap_hwmod_enable(struct omap_hwmod *oh) return -EINVAL; mutex_lock(&omap_hwmod_mutex); - r = _enable(oh); + r = _omap_hwmod_enable(oh); mutex_unlock(&omap_hwmod_mutex); return r; } + /** * omap_hwmod_idle - idle an omap_hwmod * @oh: struct omap_hwmod * @@ -1311,7 +1340,7 @@ int omap_hwmod_idle(struct omap_hwmod *oh) return -EINVAL; mutex_lock(&omap_hwmod_mutex); - _idle(oh); + _omap_hwmod_idle(oh); mutex_unlock(&omap_hwmod_mutex); return 0; @@ -1413,7 +1442,7 @@ int omap_hwmod_reset(struct omap_hwmod *oh) mutex_lock(&omap_hwmod_mutex); r = _reset(oh); if (!r) - r = _enable(oh); + r = _omap_hwmod_enable(oh); mutex_unlock(&omap_hwmod_mutex); return r; @@ -1530,6 +1559,29 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh) } /** + * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU) + * @oh: struct omap_hwmod * + * + * Returns the virtual address corresponding to the beginning of the + * module's register target, in the address range that is intended to + * be used by the MPU. Returns the virtual address upon success or NULL + * upon error. + */ +void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh) +{ + if (!oh) + return NULL; + + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + return NULL; + + if (oh->_state == _HWMOD_STATE_UNKNOWN) + return NULL; + + return oh->_mpu_rt_va; +} + +/** * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh * @oh: struct omap_hwmod * * @init_oh: struct omap_hwmod * (initiator) diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index e5530c51f77d..3cc768e8bc04 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -30,42 +30,44 @@ */ static struct omap_hwmod omap2420_mpu_hwmod; -static struct omap_hwmod omap2420_l3_hwmod; +static struct omap_hwmod omap2420_iva_hwmod; +static struct omap_hwmod omap2420_l3_main_hwmod; static struct omap_hwmod omap2420_l4_core_hwmod; /* L3 -> L4_CORE interface */ -static struct omap_hwmod_ocp_if omap2420_l3__l4_core = { - .master = &omap2420_l3_hwmod, +static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = { + .master = &omap2420_l3_main_hwmod, .slave = &omap2420_l4_core_hwmod, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* MPU -> L3 interface */ -static struct omap_hwmod_ocp_if omap2420_mpu__l3 = { +static struct omap_hwmod_ocp_if omap2420_mpu__l3_main = { .master = &omap2420_mpu_hwmod, - .slave = &omap2420_l3_hwmod, + .slave = &omap2420_l3_main_hwmod, .user = OCP_USER_MPU, }; /* Slave interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = { - &omap2420_mpu__l3, +static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = { + &omap2420_mpu__l3_main, }; /* Master interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = { - &omap2420_l3__l4_core, +static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = { + &omap2420_l3_main__l4_core, }; /* L3 */ -static struct omap_hwmod omap2420_l3_hwmod = { - .name = "l3_hwmod", +static struct omap_hwmod omap2420_l3_main_hwmod = { + .name = "l3_main", .class = &l3_hwmod_class, - .masters = omap2420_l3_masters, - .masters_cnt = ARRAY_SIZE(omap2420_l3_masters), - .slaves = omap2420_l3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_l3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) + .masters = omap2420_l3_main_masters, + .masters_cnt = ARRAY_SIZE(omap2420_l3_main_masters), + .slaves = omap2420_l3_main_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_l3_main_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, }; static struct omap_hwmod omap2420_l4_wkup_hwmod; @@ -79,7 +81,7 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = { - &omap2420_l3__l4_core, + &omap2420_l3_main__l4_core, }; /* Master interfaces on the L4_CORE interconnect */ @@ -89,13 +91,14 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = { /* L4 CORE */ static struct omap_hwmod omap2420_l4_core_hwmod = { - .name = "l4_core_hwmod", + .name = "l4_core", .class = &l4_hwmod_class, .masters = omap2420_l4_core_masters, .masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters), .slaves = omap2420_l4_core_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, }; /* Slave interfaces on the L4_WKUP interconnect */ @@ -109,18 +112,19 @@ static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = { /* L4 WKUP */ static struct omap_hwmod omap2420_l4_wkup_hwmod = { - .name = "l4_wkup_hwmod", + .name = "l4_wkup", .class = &l4_hwmod_class, .masters = omap2420_l4_wkup_masters, .masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters), .slaves = omap2420_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, }; /* Master interfaces on the MPU device */ static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = { - &omap2420_mpu__l3, + &omap2420_mpu__l3_main, }; /* MPU */ @@ -133,11 +137,40 @@ static struct omap_hwmod omap2420_mpu_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; +/* + * IVA1 interface data + */ + +/* IVA <- L3 interface */ +static struct omap_hwmod_ocp_if omap2420_l3__iva = { + .master = &omap2420_l3_main_hwmod, + .slave = &omap2420_iva_hwmod, + .clk = "iva1_ifck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap2420_iva_masters[] = { + &omap2420_l3__iva, +}; + +/* + * IVA2 (IVA2) + */ + +static struct omap_hwmod omap2420_iva_hwmod = { + .name = "iva", + .class = &iva_hwmod_class, + .masters = omap2420_iva_masters, + .masters_cnt = ARRAY_SIZE(omap2420_iva_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + static __initdata struct omap_hwmod *omap2420_hwmods[] = { - &omap2420_l3_hwmod, + &omap2420_l3_main_hwmod, &omap2420_l4_core_hwmod, &omap2420_l4_wkup_hwmod, &omap2420_mpu_hwmod, + &omap2420_iva_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 0852d954da40..4526628ed287 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -30,47 +30,47 @@ */ static struct omap_hwmod omap2430_mpu_hwmod; -static struct omap_hwmod omap2430_l3_hwmod; +static struct omap_hwmod omap2430_iva_hwmod; +static struct omap_hwmod omap2430_l3_main_hwmod; static struct omap_hwmod omap2430_l4_core_hwmod; /* L3 -> L4_CORE interface */ -static struct omap_hwmod_ocp_if omap2430_l3__l4_core = { - .master = &omap2430_l3_hwmod, +static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = { + .master = &omap2430_l3_main_hwmod, .slave = &omap2430_l4_core_hwmod, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* MPU -> L3 interface */ -static struct omap_hwmod_ocp_if omap2430_mpu__l3 = { +static struct omap_hwmod_ocp_if omap2430_mpu__l3_main = { .master = &omap2430_mpu_hwmod, - .slave = &omap2430_l3_hwmod, + .slave = &omap2430_l3_main_hwmod, .user = OCP_USER_MPU, }; /* Slave interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = { - &omap2430_mpu__l3, +static struct omap_hwmod_ocp_if *omap2430_l3_main_slaves[] = { + &omap2430_mpu__l3_main, }; /* Master interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = { - &omap2430_l3__l4_core, +static struct omap_hwmod_ocp_if *omap2430_l3_main_masters[] = { + &omap2430_l3_main__l4_core, }; /* L3 */ -static struct omap_hwmod omap2430_l3_hwmod = { - .name = "l3_hwmod", +static struct omap_hwmod omap2430_l3_main_hwmod = { + .name = "l3_main", .class = &l3_hwmod_class, - .masters = omap2430_l3_masters, - .masters_cnt = ARRAY_SIZE(omap2430_l3_masters), - .slaves = omap2430_l3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_l3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) + .masters = omap2430_l3_main_masters, + .masters_cnt = ARRAY_SIZE(omap2430_l3_main_masters), + .slaves = omap2430_l3_main_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_l3_main_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, }; static struct omap_hwmod omap2430_l4_wkup_hwmod; -static struct omap_hwmod omap2430_mmc1_hwmod; -static struct omap_hwmod omap2430_mmc2_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { @@ -81,7 +81,7 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = { - &omap2430_l3__l4_core, + &omap2430_l3_main__l4_core, }; /* Master interfaces on the L4_CORE interconnect */ @@ -91,13 +91,14 @@ static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = { /* L4 CORE */ static struct omap_hwmod omap2430_l4_core_hwmod = { - .name = "l4_core_hwmod", + .name = "l4_core", .class = &l4_hwmod_class, .masters = omap2430_l4_core_masters, .masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters), .slaves = omap2430_l4_core_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, }; /* Slave interfaces on the L4_WKUP interconnect */ @@ -111,18 +112,19 @@ static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = { /* L4 WKUP */ static struct omap_hwmod omap2430_l4_wkup_hwmod = { - .name = "l4_wkup_hwmod", + .name = "l4_wkup", .class = &l4_hwmod_class, .masters = omap2430_l4_wkup_masters, .masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters), .slaves = omap2430_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, }; /* Master interfaces on the MPU device */ static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = { - &omap2430_mpu__l3, + &omap2430_mpu__l3_main, }; /* MPU */ @@ -135,11 +137,40 @@ static struct omap_hwmod omap2430_mpu_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; +/* + * IVA2_1 interface data + */ + +/* IVA2 <- L3 interface */ +static struct omap_hwmod_ocp_if omap2430_l3__iva = { + .master = &omap2430_l3_main_hwmod, + .slave = &omap2430_iva_hwmod, + .clk = "dsp_fck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap2430_iva_masters[] = { + &omap2430_l3__iva, +}; + +/* + * IVA2 (IVA2) + */ + +static struct omap_hwmod omap2430_iva_hwmod = { + .name = "iva", + .class = &iva_hwmod_class, + .masters = omap2430_iva_masters, + .masters_cnt = ARRAY_SIZE(omap2430_iva_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + static __initdata struct omap_hwmod *omap2430_hwmods[] = { - &omap2430_l3_hwmod, + &omap2430_l3_main_hwmod, &omap2430_l4_core_hwmod, &omap2430_l4_wkup_hwmod, &omap2430_mpu_hwmod, + &omap2430_iva_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 39b0c0eaa37d..5d8eb58ba5e3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -32,51 +32,53 @@ */ static struct omap_hwmod omap3xxx_mpu_hwmod; -static struct omap_hwmod omap3xxx_l3_hwmod; +static struct omap_hwmod omap3xxx_iva_hwmod; +static struct omap_hwmod omap3xxx_l3_main_hwmod; static struct omap_hwmod omap3xxx_l4_core_hwmod; static struct omap_hwmod omap3xxx_l4_per_hwmod; /* L3 -> L4_CORE interface */ -static struct omap_hwmod_ocp_if omap3xxx_l3__l4_core = { - .master = &omap3xxx_l3_hwmod, +static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { + .master = &omap3xxx_l3_main_hwmod, .slave = &omap3xxx_l4_core_hwmod, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L3 -> L4_PER interface */ -static struct omap_hwmod_ocp_if omap3xxx_l3__l4_per = { - .master = &omap3xxx_l3_hwmod, +static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = { + .master = &omap3xxx_l3_main_hwmod, .slave = &omap3xxx_l4_per_hwmod, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* MPU -> L3 interface */ -static struct omap_hwmod_ocp_if omap3xxx_mpu__l3 = { +static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = { .master = &omap3xxx_mpu_hwmod, - .slave = &omap3xxx_l3_hwmod, + .slave = &omap3xxx_l3_main_hwmod, .user = OCP_USER_MPU, }; /* Slave interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap3xxx_l3_slaves[] = { - &omap3xxx_mpu__l3, +static struct omap_hwmod_ocp_if *omap3xxx_l3_main_slaves[] = { + &omap3xxx_mpu__l3_main, }; /* Master interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap3xxx_l3_masters[] = { - &omap3xxx_l3__l4_core, - &omap3xxx_l3__l4_per, +static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = { + &omap3xxx_l3_main__l4_core, + &omap3xxx_l3_main__l4_per, }; /* L3 */ -static struct omap_hwmod omap3xxx_l3_hwmod = { - .name = "l3_hwmod", +static struct omap_hwmod omap3xxx_l3_main_hwmod = { + .name = "l3_main", .class = &l3_hwmod_class, - .masters = omap3xxx_l3_masters, - .masters_cnt = ARRAY_SIZE(omap3xxx_l3_masters), - .slaves = omap3xxx_l3_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_l3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + .masters = omap3xxx_l3_main_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters), + .slaves = omap3xxx_l3_main_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_l3_main_slaves), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .flags = HWMOD_NO_IDLEST, }; static struct omap_hwmod omap3xxx_l4_wkup_hwmod; @@ -90,7 +92,7 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = { - &omap3xxx_l3__l4_core, + &omap3xxx_l3_main__l4_core, }; /* Master interfaces on the L4_CORE interconnect */ @@ -100,18 +102,19 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = { /* L4 CORE */ static struct omap_hwmod omap3xxx_l4_core_hwmod = { - .name = "l4_core_hwmod", + .name = "l4_core", .class = &l4_hwmod_class, .masters = omap3xxx_l4_core_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_l4_core_masters), .slaves = omap3xxx_l4_core_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .flags = HWMOD_NO_IDLEST, }; /* Slave interfaces on the L4_PER interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = { - &omap3xxx_l3__l4_per, + &omap3xxx_l3_main__l4_per, }; /* Master interfaces on the L4_PER interconnect */ @@ -120,13 +123,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = { /* L4 PER */ static struct omap_hwmod omap3xxx_l4_per_hwmod = { - .name = "l4_per_hwmod", + .name = "l4_per", .class = &l4_hwmod_class, .masters = omap3xxx_l4_per_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_l4_per_masters), .slaves = omap3xxx_l4_per_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .flags = HWMOD_NO_IDLEST, }; /* Slave interfaces on the L4_WKUP interconnect */ @@ -140,18 +144,19 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_masters[] = { /* L4 WKUP */ static struct omap_hwmod omap3xxx_l4_wkup_hwmod = { - .name = "l4_wkup_hwmod", + .name = "l4_wkup", .class = &l4_hwmod_class, .masters = omap3xxx_l4_wkup_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_masters), .slaves = omap3xxx_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .flags = HWMOD_NO_IDLEST, }; /* Master interfaces on the MPU device */ static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = { - &omap3xxx_mpu__l3, + &omap3xxx_mpu__l3_main, }; /* MPU */ @@ -164,12 +169,41 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; +/* + * IVA2_2 interface data + */ + +/* IVA2 <- L3 interface */ +static struct omap_hwmod_ocp_if omap3xxx_l3__iva = { + .master = &omap3xxx_l3_main_hwmod, + .slave = &omap3xxx_iva_hwmod, + .clk = "iva2_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_iva_masters[] = { + &omap3xxx_l3__iva, +}; + +/* + * IVA2 (IVA2) + */ + +static struct omap_hwmod omap3xxx_iva_hwmod = { + .name = "iva", + .class = &iva_hwmod_class, + .masters = omap3xxx_iva_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { - &omap3xxx_l3_hwmod, + &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, &omap3xxx_l4_per_hwmod, &omap3xxx_l4_wkup_hwmod, &omap3xxx_mpu_hwmod, + &omap3xxx_iva_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 1e80b914fa1a..08a134243ecb 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -66,3 +66,6 @@ struct omap_hwmod_class mpu_hwmod_class = { .name = "mpu" }; +struct omap_hwmod_class iva_hwmod_class = { + .name = "iva" +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 3645a28c7c27..c34e98bf1242 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -20,5 +20,6 @@ extern struct omap_hwmod_class l3_hwmod_class; extern struct omap_hwmod_class l4_hwmod_class; extern struct omap_hwmod_class mpu_hwmod_class; +extern struct omap_hwmod_class iva_hwmod_class; #endif diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c new file mode 100644 index 000000000000..68f9f2e95891 --- /dev/null +++ b/arch/arm/mach-omap2/pm.c @@ -0,0 +1,84 @@ +/* + * pm.c - Common OMAP2+ power management-related code + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/err.h> + +#include <plat/omap-pm.h> +#include <plat/omap_device.h> +#include <plat/common.h> + +static struct omap_device_pm_latency *pm_lats; + +static struct device *mpu_dev; +static struct device *dsp_dev; +static struct device *l3_dev; + +struct device *omap2_get_mpuss_device(void) +{ + WARN_ON_ONCE(!mpu_dev); + return mpu_dev; +} + +struct device *omap2_get_dsp_device(void) +{ + WARN_ON_ONCE(!dsp_dev); + return dsp_dev; +} + +struct device *omap2_get_l3_device(void) +{ + WARN_ON_ONCE(!l3_dev); + return l3_dev; +} + +/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */ +static int _init_omap_device(char *name, struct device **new_dev) +{ + struct omap_hwmod *oh; + struct omap_device *od; + + oh = omap_hwmod_lookup(name); + if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", + __func__, name)) + return -ENODEV; + + od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false); + if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n", + __func__, name)) + return -ENODEV; + + *new_dev = &od->pdev.dev; + + return 0; +} + +/* + * Build omap_devices for processors and bus. + */ +static void omap2_init_processor_devices(void) +{ + _init_omap_device("mpu", &mpu_dev); + _init_omap_device("iva", &dsp_dev); + _init_omap_device("l3_main", &l3_dev); +} + +static int __init omap2_common_pm_init(void) +{ + omap2_init_processor_devices(); + omap_pm_if_init(); + + return 0; +} +device_initcall(omap2_common_pm_init); + diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index e321281ab6e1..6aeedeacdad8 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -39,7 +39,6 @@ #include <plat/clock.h> #include <plat/sram.h> #include <plat/control.h> -#include <plat/mux.h> #include <plat/dma.h> #include <plat/board.h> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index b88737fd6cfe..fb4994ad622e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -385,8 +385,9 @@ void omap_sram_idle(void) /* Enable IO-PAD and IO-CHAIN wakeups */ per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON) { + if (omap3_has_io_wakeup() && \ + (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON)) { prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); omap3_enable_io_chain(); } @@ -479,7 +480,7 @@ void omap_sram_idle(void) } /* Disable IO-PAD and IO-CHAIN wakeup */ - if (core_next_state < PWRDM_POWER_ON) { + if (omap3_has_io_wakeup() && core_next_state < PWRDM_POWER_ON) { prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); omap3_disable_io_chain(); } diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c new file mode 100644 index 000000000000..54544b4fc76b --- /dev/null +++ b/arch/arm/mach-omap2/pm44xx.c @@ -0,0 +1,135 @@ +/* + * OMAP4 Power Management Routines + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/pm.h> +#include <linux/suspend.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/err.h> +#include <linux/slab.h> + +#include <plat/powerdomain.h> +#include <mach/omap4-common.h> + +struct power_state { + struct powerdomain *pwrdm; + u32 next_state; +#ifdef CONFIG_SUSPEND + u32 saved_state; +#endif + struct list_head node; +}; + +static LIST_HEAD(pwrst_list); + +#ifdef CONFIG_SUSPEND +static int omap4_pm_prepare(void) +{ + disable_hlt(); + return 0; +} + +static int omap4_pm_suspend(void) +{ + do_wfi(); + return 0; +} + +static int omap4_pm_enter(suspend_state_t suspend_state) +{ + int ret = 0; + + switch (suspend_state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + ret = omap4_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static void omap4_pm_finish(void) +{ + enable_hlt(); + return; +} + +static int omap4_pm_begin(suspend_state_t state) +{ + return 0; +} + +static void omap4_pm_end(void) +{ + return; +} + +static struct platform_suspend_ops omap_pm_ops = { + .begin = omap4_pm_begin, + .end = omap4_pm_end, + .prepare = omap4_pm_prepare, + .enter = omap4_pm_enter, + .finish = omap4_pm_finish, + .valid = suspend_valid_only_mem, +}; +#endif /* CONFIG_SUSPEND */ + +static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) +{ + struct power_state *pwrst; + + if (!pwrdm->pwrsts) + return 0; + + pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC); + if (!pwrst) + return -ENOMEM; + pwrst->pwrdm = pwrdm; + pwrst->next_state = PWRDM_POWER_ON; + list_add(&pwrst->node, &pwrst_list); + + return pwrdm_set_next_pwrst(pwrst->pwrdm, pwrst->next_state); +} + +/** + * omap4_pm_init - Init routine for OMAP4 PM + * + * Initializes all powerdomain and clockdomain target states + * and all PRCM settings. + */ +static int __init omap4_pm_init(void) +{ + int ret; + + if (!cpu_is_omap44xx()) + return -ENODEV; + + pr_err("Power Management for TI OMAP4.\n"); + +#ifdef CONFIG_PM + ret = pwrdm_for_each(pwrdms_setup, NULL); + if (ret) { + pr_err("Failed to setup powerdomains\n"); + goto err2; + } +#endif + +#ifdef CONFIG_SUSPEND + suspend_set_ops(&omap_pm_ops); +#endif /* CONFIG_SUSPEND */ + +err2: + return ret; +} +late_initcall(omap4_pm_init); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index a2904aa7065e..6527ec30dc17 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -875,6 +875,7 @@ int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) break; case 4: m = OMAP_MEM4_RETSTATE_MASK; + break; default: WARN_ON(1); /* should never happen */ return -EEXIST; diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index bd87112beea8..fa904861668b 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -75,12 +75,19 @@ static struct powerdomain mpu_3xxx_pwrdm = { }, }; +/* + * The USBTLL Save-and-Restore mechanism is broken on + * 3430s upto ES3.0 and 3630ES1.0. Hence this feature + * needs to be disabled on these chips. + * Refer: 3430 errata ID i459 and 3630 errata ID i579 + */ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = { .name = "core_pwrdm", .prcm_offs = CORE_MOD, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 | CHIP_IS_OMAP3430ES2 | - CHIP_IS_OMAP3430ES3_0), + CHIP_IS_OMAP3430ES3_0 | + CHIP_IS_OMAP3630ES1), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 2, @@ -97,7 +104,8 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = { static struct powerdomain core_3xxx_es3_1_pwrdm = { .name = "core_pwrdm", .prcm_offs = CORE_MOD, - .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1 | + CHIP_GE_OMAP3630ES1_1), .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .flags = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 3771254dfa81..566e991ede81 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -37,6 +37,9 @@ #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ +#define UART_ERRATA_FIFO_FULL_ABORT (0x1 << 0) +#define UART_ERRATA_i202_MDR1_ACCESS (0x1 << 1) + /* * NOTE: By default the serial timeout is disabled as it causes lost characters * over the serial ports. This means that the UART clocks will stay on until @@ -64,6 +67,7 @@ struct omap_uart_state { struct list_head node; struct platform_device pdev; + u32 errata; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) int context_valid; @@ -74,6 +78,7 @@ struct omap_uart_state { u16 sysc; u16 scr; u16 wer; + u16 mcr; #endif }; @@ -180,6 +185,42 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart) #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) +/* + * Work Around for Errata i202 (3430 - 1.12, 3630 - 1.6) + * The access to uart register after MDR1 Access + * causes UART to corrupt data. + * + * Need a delay = + * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS) + * give 10 times as much + */ +static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val, + u8 fcr_val) +{ + struct plat_serial8250_port *p = uart->p; + u8 timeout = 255; + + serial_write_reg(p, UART_OMAP_MDR1, mdr1_val); + udelay(2); + serial_write_reg(p, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT | + UART_FCR_CLEAR_RCVR); + /* + * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and + * TX_FIFO_E bit is 1. + */ + while (UART_LSR_THRE != (serial_read_reg(p, UART_LSR) & + (UART_LSR_THRE | UART_LSR_DR))) { + timeout--; + if (!timeout) { + /* Should *never* happen. we warn and carry on */ + dev_crit(&uart->pdev.dev, "Errata i202: timedout %x\n", + serial_read_reg(p, UART_LSR)); + break; + } + udelay(1); + } +} + static void omap_uart_save_context(struct omap_uart_state *uart) { u16 lcr = 0; @@ -197,6 +238,9 @@ static void omap_uart_save_context(struct omap_uart_state *uart) uart->sysc = serial_read_reg(p, UART_OMAP_SYSC); uart->scr = serial_read_reg(p, UART_OMAP_SCR); uart->wer = serial_read_reg(p, UART_OMAP_WER); + serial_write_reg(p, UART_LCR, 0x80); + uart->mcr = serial_read_reg(p, UART_MCR); + serial_write_reg(p, UART_LCR, lcr); uart->context_valid = 1; } @@ -214,7 +258,10 @@ static void omap_uart_restore_context(struct omap_uart_state *uart) uart->context_valid = 0; - serial_write_reg(p, UART_OMAP_MDR1, 0x7); + if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) + omap_uart_mdr1_errataset(uart, 0x07, 0xA0); + else + serial_write_reg(p, UART_OMAP_MDR1, 0x7); serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ efr = serial_read_reg(p, UART_EFR); serial_write_reg(p, UART_EFR, UART_EFR_ECB); @@ -225,14 +272,18 @@ static void omap_uart_restore_context(struct omap_uart_state *uart) serial_write_reg(p, UART_DLM, uart->dlh); serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */ serial_write_reg(p, UART_IER, uart->ier); - serial_write_reg(p, UART_FCR, 0xA1); + serial_write_reg(p, UART_LCR, 0x80); + serial_write_reg(p, UART_MCR, uart->mcr); serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */ serial_write_reg(p, UART_EFR, efr); serial_write_reg(p, UART_LCR, UART_LCR_WLEN8); serial_write_reg(p, UART_OMAP_SCR, uart->scr); serial_write_reg(p, UART_OMAP_WER, uart->wer); serial_write_reg(p, UART_OMAP_SYSC, uart->sysc); - serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */ + if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS) + omap_uart_mdr1_errataset(uart, 0x00, 0xA1); + else + serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */ } #else static inline void omap_uart_save_context(struct omap_uart_state *uart) {} @@ -489,8 +540,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) } uart->wk_mask = wk_mask; } else { - uart->wk_en = 0; - uart->wk_st = 0; + uart->wk_en = NULL; + uart->wk_st = NULL; uart->wk_mask = 0; uart->padconf = 0; } @@ -552,7 +603,8 @@ static ssize_t sleep_timeout_store(struct device *dev, return n; } -DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); +static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, + sleep_timeout_store); #define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} @@ -749,14 +801,20 @@ void __init omap_serial_init_port(int port) * omap3xxx: Never read empty UART fifo on UARTs * with IP rev >=0x52 */ - if (cpu_is_omap44xx()) { - uart->p->serial_in = serial_in_override; - uart->p->serial_out = serial_out_override; - } else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) - >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) { + if (cpu_is_omap44xx()) + uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; + else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) + uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; + + if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) { uart->p->serial_in = serial_in_override; uart->p->serial_out = serial_out_override; } + + /* Enable the MDR1 errata for OMAP3 */ + if (cpu_is_omap34xx()) + uart->errata |= UART_ERRATA_i202_MDR1_ACCESS; } /** diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c index d72d1ac30333..b11bf385d360 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -23,7 +23,6 @@ #include <linux/dma-mapping.h> #include <asm/io.h> -#include <plat/mux.h> #include <mach/hardware.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c new file mode 100644 index 000000000000..a216d88b04b5 --- /dev/null +++ b/arch/arm/mach-omap2/usb-fs.c @@ -0,0 +1,359 @@ +/* + * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx + * + * Copyright (C) 2004 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <asm/irq.h> + +#include <plat/control.h> +#include <plat/usb.h> +#include <plat/board.h> + +#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN +#define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO +#define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO +#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN +#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG + +#include "mux.h" + +#if defined(CONFIG_ARCH_OMAP2) + +#ifdef CONFIG_USB_GADGET_OMAP + +static struct resource udc_resources[] = { + /* order is significant! */ + { /* registers */ + .start = UDC_BASE, + .end = UDC_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { /* general IRQ */ + .start = INT_USB_IRQ_GEN, + .flags = IORESOURCE_IRQ, + }, { /* PIO IRQ */ + .start = INT_USB_IRQ_NISO, + .flags = IORESOURCE_IRQ, + }, { /* SOF IRQ */ + .start = INT_USB_IRQ_ISO, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 udc_dmamask = ~(u32)0; + +static struct platform_device udc_device = { + .name = "omap_udc", + .id = -1, + .dev = { + .dma_mask = &udc_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(udc_resources), + .resource = udc_resources, +}; + +static inline void udc_device_init(struct omap_usb_config *pdata) +{ + pdata->udc_device = &udc_device; +} + +#else + +static inline void udc_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = ~(u32)0; + +static struct resource ohci_resources[] = { + { + .start = OMAP_OHCI_BASE, + .end = OMAP_OHCI_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_USB_IRQ_HGEN, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ohci_device = { + .name = "ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, +}; + +static inline void ohci_device_init(struct omap_usb_config *pdata) +{ + pdata->ohci_device = &ohci_device; +} + +#else + +static inline void ohci_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) + +static struct resource otg_resources[] = { + /* order is significant! */ + { + .start = OTG_BASE, + .end = OTG_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = INT_USB_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device otg_device = { + .name = "omap_otg", + .id = -1, + .num_resources = ARRAY_SIZE(otg_resources), + .resource = otg_resources, +}; + +static inline void otg_device_init(struct omap_usb_config *pdata) +{ + pdata->otg_device = &otg_device; +} + +#else + +static inline void otg_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +static void omap2_usb_devconf_clear(u8 port, u32 mask) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r &= ~USBTXWRMODEI(port, mask); + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static void omap2_usb_devconf_set(u8 port, u32 mask) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r |= USBTXWRMODEI(port, mask); + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static void omap2_usb2_disable_5pinbitll(void) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI); + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static void omap2_usb2_enable_5pinunitll(void) +{ + u32 r; + + r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI; + omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); +} + +static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device) +{ + u32 syscon1 = 0; + + omap2_usb_devconf_clear(0, USB_BIDIR_TLL); + + if (nwires == 0) + return 0; + + if (is_device) + omap_mux_init_signal("usb0_puen", 0); + + omap_mux_init_signal("usb0_dat", 0); + omap_mux_init_signal("usb0_txen", 0); + omap_mux_init_signal("usb0_se0", 0); + if (nwires != 3) + omap_mux_init_signal("usb0_rcv", 0); + + switch (nwires) { + case 3: + syscon1 = 2; + omap2_usb_devconf_set(0, USB_BIDIR); + break; + case 4: + syscon1 = 1; + omap2_usb_devconf_set(0, USB_BIDIR); + break; + case 6: + syscon1 = 3; + omap_mux_init_signal("usb0_vp", 0); + omap_mux_init_signal("usb0_vm", 0); + omap2_usb_devconf_set(0, USB_UNIDIR); + break; + default: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 0, nwires); + } + + return syscon1 << 16; +} + +static u32 __init omap2_usb1_init(unsigned nwires) +{ + u32 syscon1 = 0; + + omap2_usb_devconf_clear(1, USB_BIDIR_TLL); + + if (nwires == 0) + return 0; + + /* NOTE: board-specific code must set up pin muxing for usb1, + * since each signal could come out on either of two balls. + */ + + switch (nwires) { + case 2: + /* NOTE: board-specific code must override this setting if + * this TLL link is not using DP/DM + */ + syscon1 = 1; + omap2_usb_devconf_set(1, USB_BIDIR_TLL); + break; + case 3: + syscon1 = 2; + omap2_usb_devconf_set(1, USB_BIDIR); + break; + case 4: + syscon1 = 1; + omap2_usb_devconf_set(1, USB_BIDIR); + break; + case 6: + default: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 1, nwires); + } + + return syscon1 << 20; +} + +static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup) +{ + u32 syscon1 = 0; + + omap2_usb2_disable_5pinbitll(); + alt_pingroup = 0; + + /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ + if (alt_pingroup || nwires == 0) + return 0; + + omap_mux_init_signal("usb2_dat", 0); + omap_mux_init_signal("usb2_se0", 0); + if (nwires > 2) + omap_mux_init_signal("usb2_txen", 0); + if (nwires > 3) + omap_mux_init_signal("usb2_rcv", 0); + + switch (nwires) { + case 2: + /* NOTE: board-specific code must override this setting if + * this TLL link is not using DP/DM + */ + syscon1 = 1; + omap2_usb_devconf_set(2, USB_BIDIR_TLL); + break; + case 3: + syscon1 = 2; + omap2_usb_devconf_set(2, USB_BIDIR); + break; + case 4: + syscon1 = 1; + omap2_usb_devconf_set(2, USB_BIDIR); + break; + case 5: + /* NOTE: board-specific code must mux this setting depending + * on TLL link using DP/DM. Something must also + * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED} + * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0 + * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0 + */ + + syscon1 = 3; + omap2_usb2_enable_5pinunitll(); + break; + case 6: + default: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 2, nwires); + } + + return syscon1 << 24; +} + +void __init omap2_usbfs_init(struct omap_usb_config *pdata) +{ + struct clk *ick; + + if (!cpu_is_omap24xx()) + return; + + ick = clk_get(NULL, "usb_l4_ick"); + if (IS_ERR(ick)) + return; + + clk_enable(ick); + pdata->usb0_init = omap2_usb0_init; + pdata->usb1_init = omap2_usb1_init; + pdata->usb2_init = omap2_usb2_init; + udc_device_init(pdata); + ohci_device_init(pdata); + otg_device_init(pdata); + omap_otg_init(pdata); + clk_disable(ick); + clk_put(ick); +} + +#endif diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 96f6787e00b2..33a5cde1c227 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -28,7 +28,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include <plat/mux.h> #include <plat/usb.h> #ifdef CONFIG_USB_MUSB_SOC diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 10a2013c1104..64a0112b70a5 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -17,8 +17,8 @@ #include <linux/usb/musb.h> #include <plat/gpmc.h> -#include <plat/mux.h> +#include "mux.h" static u8 async_cs, sync_cs; static unsigned refclk_psec; @@ -325,17 +325,17 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, else { /* assume OMAP 2420 ES2.0 and later */ if (dmachan & (1 << 0)) - omap_cfg_reg(AA10_242X_DMAREQ0); + omap_mux_init_signal("sys_ndmareq0", 0); if (dmachan & (1 << 1)) - omap_cfg_reg(AA6_242X_DMAREQ1); + omap_mux_init_signal("sys_ndmareq1", 0); if (dmachan & (1 << 2)) - omap_cfg_reg(E4_242X_DMAREQ2); + omap_mux_init_signal("sys_ndmareq2", 0); if (dmachan & (1 << 3)) - omap_cfg_reg(G4_242X_DMAREQ3); + omap_mux_init_signal("sys_ndmareq3", 0); if (dmachan & (1 << 4)) - omap_cfg_reg(D3_242X_DMAREQ4); + omap_mux_init_signal("sys_ndmareq4", 0); if (dmachan & (1 << 5)) - omap_cfg_reg(E3_242X_DMAREQ5); + omap_mux_init_signal("sys_ndmareq5", 0); } /* so far so good ... register the device */ diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h index c34ded523f10..63f3c2804239 100644 --- a/arch/arm/plat-mxc/include/mach/ssi.h +++ b/arch/arm/plat-mxc/include/mach/ssi.h @@ -10,6 +10,9 @@ struct imx_ssi_platform_data { unsigned int flags; #define IMX_SSI_DMA (1 << 0) #define IMX_SSI_USE_AC97 (1 << 1) +#define IMX_SSI_NET (1 << 2) +#define IMX_SSI_SYN (1 << 3) +#define IMX_SSI_USE_I2S_SLAVE (1 << 4) void (*ac97_reset) (struct snd_ac97 *ac97); void (*ac97_warm_reset)(struct snd_ac97 *ac97); }; diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 78b49a626d06..e39a417a368d 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -1,6 +1,6 @@ if ARCH_OMAP -menu "TI OMAP Implementations" +menu "TI OMAP Common Features" config ARCH_OMAP_OTG bool @@ -21,24 +21,6 @@ config ARCH_OMAP2PLUS help "Systems based on omap24xx, omap34xx or omap44xx" -config ARCH_OMAP2 - bool "TI OMAP2" - depends on ARCH_OMAP2PLUS - select CPU_V6 - -config ARCH_OMAP3 - bool "TI OMAP3" - depends on ARCH_OMAP2PLUS - select CPU_V7 - select USB_ARCH_HAS_EHCI - select ARM_L1_CACHE_SHIFT_6 - -config ARCH_OMAP4 - bool "TI OMAP4" - depends on ARCH_OMAP2PLUS - select CPU_V7 - select ARM_GIC - endchoice comment "OMAP Feature Selections" @@ -51,7 +33,7 @@ config OMAP_DEBUG_DEVICES config OMAP_DEBUG_LEDS bool depends on OMAP_DEBUG_DEVICES - default y if LEDS || LEDS_OMAP_DEBUG + default y if LEDS config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" @@ -106,6 +88,15 @@ config OMAP_MBOX_FWK Say Y here if you want to use OMAP Mailbox framework support for DSP, IVA1.0 and IVA2 in OMAP1/2/3. +config OMAP_MBOX_KFIFO_SIZE + int "Mailbox kfifo default buffer size (bytes)" + depends on OMAP_MBOX_FWK + default 256 + help + Specify the default size of mailbox's kfifo buffers (bytes). + This can also be changed at runtime (via the mbox_kfifo_size + module parameter). + config OMAP_IOMMU tristate @@ -120,7 +111,7 @@ config OMAP_IOMMU_DEBUG choice prompt "System timer" - default OMAP_MPU_TIMER + default OMAP_32K_TIMER if !ARCH_OMAP15XX config OMAP_MPU_TIMER bool "Use mpu timer" diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 98f01910c2cf..9405831b746a 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_ARCH_OMAP2) += omap_device.o obj-$(CONFIG_ARCH_OMAP3) += omap_device.o +obj-$(CONFIG_ARCH_OMAP4) += omap_device.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index ebed82699eb2..3008e7104487 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -317,18 +317,18 @@ static struct omap_globals omap3_globals = { .uart1_phys = OMAP3_UART1_BASE, .uart2_phys = OMAP3_UART2_BASE, .uart3_phys = OMAP3_UART3_BASE, + .uart4_phys = OMAP3_UART4_BASE, /* Only on 3630 */ }; -void __init omap2_set_globals_343x(void) +void __init omap2_set_globals_3xxx(void) { __omap2_set_globals(&omap3_globals); } -void __init omap2_set_globals_36xx(void) +void __init omap3_map_io(void) { - omap3_globals.uart4_phys = OMAP3_UART4_BASE; - - __omap2_set_globals(&omap3_globals); + omap2_set_globals_3xxx(); + omap34xx_map_common_io(); } #endif diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index 53fcef7c5201..fc05b1022602 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -39,7 +39,7 @@ static struct h2p2_dbg_fpga __iomem *fpga; static u16 led_state, hw_led_state; -#ifdef CONFIG_LEDS_OMAP_DEBUG +#ifdef CONFIG_OMAP_DEBUG_LEDS #define new_led_api() 1 #else #define new_led_api() 0 diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 95677d17cd1c..d1920be7833b 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -24,135 +24,13 @@ #include <plat/control.h> #include <plat/board.h> #include <plat/mmc.h> -#include <plat/mux.h> #include <mach/gpio.h> #include <plat/menelaus.h> #include <plat/mcbsp.h> -#include <plat/dsp_common.h> #include <plat/omap44xx.h> -#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) - -static struct dsp_platform_data dsp_pdata = { - .kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list), -}; - -static struct resource omap_dsp_resources[] = { - { - .name = "dsp_mmu", - .start = -1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device omap_dsp_device = { - .name = "dsp", - .id = -1, - .num_resources = ARRAY_SIZE(omap_dsp_resources), - .resource = omap_dsp_resources, - .dev = { - .platform_data = &dsp_pdata, - }, -}; - -static inline void omap_init_dsp(void) -{ - struct resource *res; - int irq; - - if (cpu_is_omap15xx()) - irq = INT_1510_DSP_MMU; - else if (cpu_is_omap16xx()) - irq = INT_1610_DSP_MMU; - else if (cpu_is_omap24xx()) - irq = INT_24XX_DSP_MMU; - - res = platform_get_resource_byname(&omap_dsp_device, - IORESOURCE_IRQ, "dsp_mmu"); - res->start = irq; - - platform_device_register(&omap_dsp_device); -} - -int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev) -{ - static DEFINE_MUTEX(dsp_pdata_lock); - - spin_lock_init(&kdev->lock); - - mutex_lock(&dsp_pdata_lock); - list_add_tail(&kdev->entry, &dsp_pdata.kdev_list); - mutex_unlock(&dsp_pdata_lock); - - return 0; -} -EXPORT_SYMBOL(dsp_kfunc_device_register); - -#else -static inline void omap_init_dsp(void) { } -#endif /* CONFIG_OMAP_DSP */ - /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) - -static void omap_init_kp(void) -{ - /* 2430 and 34xx keypad is on TWL4030 */ - if (cpu_is_omap2430() || cpu_is_omap34xx()) - return; - if (machine_is_omap_h2() || machine_is_omap_h3()) { - omap_cfg_reg(F18_1610_KBC0); - omap_cfg_reg(D20_1610_KBC1); - omap_cfg_reg(D19_1610_KBC2); - omap_cfg_reg(E18_1610_KBC3); - omap_cfg_reg(C21_1610_KBC4); - - omap_cfg_reg(G18_1610_KBR0); - omap_cfg_reg(F19_1610_KBR1); - omap_cfg_reg(H14_1610_KBR2); - omap_cfg_reg(E20_1610_KBR3); - omap_cfg_reg(E19_1610_KBR4); - omap_cfg_reg(N19_1610_KBR5); - } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { - omap_cfg_reg(E2_7XX_KBR0); - omap_cfg_reg(J7_7XX_KBR1); - omap_cfg_reg(E1_7XX_KBR2); - omap_cfg_reg(F3_7XX_KBR3); - omap_cfg_reg(D2_7XX_KBR4); - - omap_cfg_reg(C2_7XX_KBC0); - omap_cfg_reg(D3_7XX_KBC1); - omap_cfg_reg(E4_7XX_KBC2); - omap_cfg_reg(F4_7XX_KBC3); - omap_cfg_reg(E3_7XX_KBC4); - } else if (machine_is_omap_h4()) { - omap_cfg_reg(T19_24XX_KBR0); - omap_cfg_reg(R19_24XX_KBR1); - omap_cfg_reg(V18_24XX_KBR2); - omap_cfg_reg(M21_24XX_KBR3); - omap_cfg_reg(E5__24XX_KBR4); - if (omap_has_menelaus()) { - omap_cfg_reg(B3__24XX_KBR5); - omap_cfg_reg(AA4_24XX_KBC2); - omap_cfg_reg(B13_24XX_KBC6); - } else { - omap_cfg_reg(M18_24XX_KBR5); - omap_cfg_reg(H19_24XX_KBC2); - omap_cfg_reg(N19_24XX_KBC6); - } - omap_cfg_reg(R20_24XX_KBC0); - omap_cfg_reg(M14_24XX_KBC1); - omap_cfg_reg(V17_24XX_KBC3); - omap_cfg_reg(P21_24XX_KBC4); - omap_cfg_reg(L14_24XX_KBC5); - } -} -#else -static inline void omap_init_kp(void) {} -#endif - -/*-------------------------------------------------------------------------*/ #if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE) static struct platform_device **omap_mcbsp_devices; @@ -419,8 +297,6 @@ static int __init omap_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_dsp(); - omap_init_kp(); omap_init_rng(); omap_init_mcpdm(); omap_init_uwire(); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index f7f571e7987e..ec7eddf9e525 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -290,7 +290,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, val = dma_read(CCR(lch)); /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */ - val &= ~((3 << 19) | 0x1f); + val &= ~((1 << 23) | (3 << 19) | 0x1f); val |= (dma_trigger & ~0x1f) << 14; val |= dma_trigger & 0x1f; @@ -304,11 +304,14 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, else val &= ~(1 << 18); - if (src_or_dst_synch) + if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) { + val &= ~(1 << 24); /* dest synch */ + val |= (1 << 23); /* Prefetch */ + } else if (src_or_dst_synch) { val |= 1 << 24; /* source synch */ - else + } else { val &= ~(1 << 24); /* dest synch */ - + } dma_write(val, CCR(lch)); } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 9b7e3545f325..7951eefe1a0e 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -390,7 +390,9 @@ static inline int gpio_valid(int gpio) return 0; if (cpu_is_omap7xx() && gpio < 192) return 0; - if (cpu_is_omap24xx() && gpio < 128) + if (cpu_is_omap2420() && gpio < 128) + return 0; + if (cpu_is_omap2430() && gpio < 160) return 0; if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192) return 0; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index eec2b4993c69..a5ce4f0aad35 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -138,6 +138,16 @@ static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id) return platform_device_register(pdev); } +/* + * XXX This function is a temporary compatibility wrapper - only + * needed until the I2C driver can be converted to call + * omap_pm_set_max_dev_wakeup_lat() and handle a return code. + */ +static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) +{ + omap_pm_set_max_mpu_wakeup_lat(dev, t); +} + static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id) { struct resource *res; @@ -168,7 +178,7 @@ static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id) struct omap_i2c_bus_platform_data *pd; pd = pdev->dev.platform_data; - pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat; + pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; } return platform_device_register(pdev); diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 5cd622039da0..3cf4fa25ab3d 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -85,6 +85,14 @@ struct omap_usb_config { * 6 == 6 wire unidirectional (or TLL) */ u8 pins[3]; + + struct platform_device *udc_device; + struct platform_device *ohci_device; + struct platform_device *otg_device; + + u32 (*usb0_init)(unsigned nwires, unsigned is_device); + u32 (*usb1_init)(unsigned nwires); + u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); }; struct omap_lcd_config { diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index dfc472ca0cc4..fef4696dcf67 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -19,6 +19,22 @@ struct module; struct clk; struct clockdomain; +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ struct clkops { int (*enable)(struct clk *); void (*disable)(struct clk *); @@ -30,12 +46,45 @@ struct clkops { #ifdef CONFIG_ARCH_OMAP2PLUS +/* struct clksel_rate.flags possibilities */ +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) +#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */ +#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */ +#define RATE_IN_36XX (1 << 4) +#define RATE_IN_4430 (1 << 5) + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) +#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX) + +/** + * struct clksel_rate - register bitfield values corresponding to clk divisors + * @val: register bitfield value (shifted to bit 0) + * @div: clock divisor corresponding to @val + * @flags: (see "struct clksel_rate.flags possibilities" above) + * + * @val should match the value of a read from struct clk.clksel_reg + * AND'ed with struct clk.clksel_mask, shifted right to bit 0. + * + * @div is the divisor that should be applied to the parent clock's rate + * to produce the current clock's rate. + * + * XXX @flags probably should be replaced with an struct omap_chip. + */ struct clksel_rate { u32 val; u8 div; u8 flags; }; +/** + * struct clksel - available parent clocks, and a pointer to their divisors + * @parent: struct clk * to a possible parent clock + * @rates: available divisors for this parent clock + * + * A struct clksel is always associated with one or more struct clks + * and one or more struct clksel_rates. + */ struct clksel { struct clk *parent; const struct clksel_rate *rates; @@ -116,6 +165,60 @@ struct dpll_data { #endif +/* struct clk.flags possibilities */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @clksel_reg: for clksel clks, register va containing src/divisor select + * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector + * @clksel: for clksel clks, pointer to struct clksel for this clock + * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock + * @clkdm_name: clockdomain name that this clock is contained in + * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ struct clk { struct list_head node; const struct clkops *ops; @@ -129,8 +232,8 @@ struct clk { int (*set_rate)(struct clk *, unsigned long); long (*round_rate)(struct clk *, unsigned long); void (*init)(struct clk *); - __u8 enable_bit; - __s8 usecount; + u8 enable_bit; + s8 usecount; u8 fixed_div; u8 flags; #ifdef CONFIG_ARCH_OMAP2PLUS @@ -141,8 +244,8 @@ struct clk { const char *clkdm_name; struct clockdomain *clkdm; #else - __u8 rate_offset; - __u8 src_offset; + u8 rate_offset; + u8 src_offset; #endif #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) struct dentry *dent; /* For visible tree hierarchy */ @@ -188,23 +291,4 @@ extern const struct clkops clkops_null; extern struct clk dummy_ck; -/* Clock flags */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ - -/* Clksel_rate flags */ -#define RATE_IN_242X (1 << 0) -#define RATE_IN_243X (1 << 1) -#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */ -#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */ -#define RATE_IN_36XX (1 << 4) -#define RATE_IN_4430 (1 << 5) - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) - -#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX) - #endif diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 5e4afbee0fd7..9776b41ad76f 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -58,8 +58,7 @@ struct omap_globals { void omap2_set_globals_242x(void); void omap2_set_globals_243x(void); -void omap2_set_globals_343x(void); -void omap2_set_globals_36xx(void); +void omap2_set_globals_3xxx(void); void omap2_set_globals_443x(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ @@ -69,6 +68,8 @@ void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); void omap2_set_globals_uart(struct omap_globals *); +void omap3_map_io(void); + /** * omap_test_timeout - busy-loop, testing a condition * @cond: condition to test until it evaluates to true @@ -89,4 +90,8 @@ void omap2_set_globals_uart(struct omap_globals *); } \ }) +extern struct device *omap2_get_mpuss_device(void); +extern struct device *omap2_get_dsp_device(void); +extern struct device *omap2_get_l3_device(void); + #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 75141742300c..2e2ae530fced 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -66,6 +66,8 @@ unsigned int omap_rev(void); * family. This difference can be handled separately. */ #define OMAP_REVBITS_00 0x00 +#define OMAP_REVBITS_01 0x01 +#define OMAP_REVBITS_02 0x02 #define OMAP_REVBITS_10 0x10 #define OMAP_REVBITS_20 0x20 #define OMAP_REVBITS_30 0x30 @@ -376,6 +378,8 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3430_REV_ES3_1_2 0x34305034 #define OMAP3630_REV_ES1_0 0x36300034 +#define OMAP3630_REV_ES1_1 0x36300134 +#define OMAP3630_REV_ES1_2 0x36300234 #define OMAP35XX_CLASS 0x35000034 #define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) @@ -411,6 +415,8 @@ IS_OMAP_TYPE(3517, 0x3517) #define CHIP_IS_OMAP3430ES3_1 (1 << 6) #define CHIP_IS_OMAP3630ES1 (1 << 7) #define CHIP_IS_OMAP4430ES1 (1 << 8) +#define CHIP_IS_OMAP3630ES1_1 (1 << 9) +#define CHIP_IS_OMAP3630ES1_2 (1 << 10) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) @@ -424,11 +430,12 @@ IS_OMAP_TYPE(3517, 0x3517) */ #define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \ CHIP_IS_OMAP3430ES3_0 | \ - CHIP_IS_OMAP3430ES3_1 | \ - CHIP_IS_OMAP3630ES1) + CHIP_GE_OMAP3430ES3_1) #define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \ - CHIP_IS_OMAP3630ES1) - + CHIP_IS_OMAP3630ES1 | \ + CHIP_GE_OMAP3630ES1_1) +#define CHIP_GE_OMAP3630ES1_1 (CHIP_IS_OMAP3630ES1_1 | \ + CHIP_IS_OMAP3630ES1_2) int omap_chip_is(struct omap_chip_id oci); void omap2_check_revision(void); @@ -444,6 +451,7 @@ extern u32 omap3_features; #define OMAP3_HAS_NEON BIT(3) #define OMAP3_HAS_ISP BIT(4) #define OMAP3_HAS_192MHZ_CLK BIT(5) +#define OMAP3_HAS_IO_WAKEUP BIT(6) #define OMAP3_HAS_FEATURE(feat,flag) \ static inline unsigned int omap3_has_ ##feat(void) \ @@ -457,5 +465,6 @@ OMAP3_HAS_FEATURE(iva, IVA) OMAP3_HAS_FEATURE(neon, NEON) OMAP3_HAS_FEATURE(isp, ISP) OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) +OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) #endif diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h index 1c529ce9dc11..8bd15bdb4132 100644 --- a/arch/arm/plat-omap/include/plat/display.h +++ b/arch/arm/plat-omap/include/plat/display.h @@ -238,7 +238,7 @@ int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param); int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data); -int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data); +int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2); int dsi_vc_set_max_rx_packet_size(int channel, u16 len); int dsi_vc_send_null(int channel); int dsi_vc_send_bta_sync(int channel); @@ -277,8 +277,8 @@ struct omap_video_timings { * identify the mode, and does not actually use the configs * itself. However, the configs should be something that * a normal monitor can also show */ -const extern struct omap_video_timings omap_dss_pal_timings; -const extern struct omap_video_timings omap_dss_ntsc_timings; +extern const struct omap_video_timings omap_dss_pal_timings; +extern const struct omap_video_timings omap_dss_ntsc_timings; #endif struct omap_overlay_info { @@ -560,7 +560,8 @@ void omapdss_dsi_vc_enable_hs(int channel, bool enable); int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable); int omap_dsi_prepare_update(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h); + u16 *x, u16 *y, u16 *w, u16 *h, + bool enlarge_update_area); int omap_dsi_update(struct omap_dss_device *dssdev, int channel, u16 x, u16 y, u16 w, u16 h, diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 02232ca2c37f..af3a03941add 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -345,6 +345,7 @@ #define OMAP_DMA_SYNC_BLOCK 0x02 #define OMAP_DMA_SYNC_PACKET 0x03 +#define OMAP_DMA_DST_SYNC_PREFETCH 0x02 #define OMAP_DMA_SRC_SYNC 0x01 #define OMAP_DMA_DST_SYNC 0x00 diff --git a/arch/arm/plat-omap/include/plat/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h deleted file mode 100644 index da97736f3efa..000000000000 --- a/arch/arm/plat-omap/include/plat/dsp_common.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1) - * - * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved. - * - * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef ASM_ARCH_DSP_COMMON_H -#define ASM_ARCH_DSP_COMMON_H - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK) -extern void omap_dsp_request_mpui(void); -extern void omap_dsp_release_mpui(void); -extern int omap_dsp_request_mem(void); -extern int omap_dsp_release_mem(void); -#else -static inline int omap_dsp_request_mem(void) -{ - return 0; -} -#define omap_dsp_release_mem() do {} while (0) -#endif - -#endif /* ASM_ARCH_DSP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 145838a81ef6..9fd99b9e40ab 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -25,10 +25,26 @@ #define GPMC_CS_NAND_ADDRESS 0x20 #define GPMC_CS_NAND_DATA 0x24 -#define GPMC_CONFIG 0x50 -#define GPMC_STATUS 0x54 -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 +/* Control Commands */ +#define GPMC_CONFIG_RDY_BSY 0x00000001 +#define GPMC_CONFIG_DEV_SIZE 0x00000002 +#define GPMC_CONFIG_DEV_TYPE 0x00000003 +#define GPMC_SET_IRQ_STATUS 0x00000004 +#define GPMC_CONFIG_WP 0x00000005 + +#define GPMC_GET_IRQ_STATUS 0x00000006 +#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */ +#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/ +#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */ + +#define GPMC_NAND_COMMAND 0x0000000a +#define GPMC_NAND_ADDRESS 0x0000000b +#define GPMC_NAND_DATA 0x0000000c + +/* ECC commands */ +#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */ +#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */ +#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */ #define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) #define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) @@ -47,7 +63,6 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(2) #define GPMC_CONFIG1_MUXADDDATA (1 << 9) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) @@ -56,6 +71,14 @@ #define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) #define GPMC_CONFIG7_CSVALID (1 << 6) +#define GPMC_DEVICETYPE_NOR 0 +#define GPMC_DEVICETYPE_NAND 2 +#define GPMC_CONFIG_WRITEPROTECT 0x00000010 +#define GPMC_STATUS_BUFF_EMPTY 0x00000001 +#define WR_RD_PIN_MONITORING 0x00600000 +#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) +#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) + /* * Note that all values in this struct are in nanoseconds, while * the register values are in gpmc_fck cycles. @@ -108,10 +131,15 @@ extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); extern int gpmc_prefetch_enable(int cs, int dma_mode, unsigned int u32_count, int is_write); -extern void gpmc_prefetch_reset(void); -extern int gpmc_prefetch_status(void); +extern int gpmc_prefetch_reset(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); extern void gpmc_init(void); +extern int gpmc_read_status(int cmd); +extern int gpmc_cs_configure(int cs, int cmd, int wval); +extern int gpmc_nand_read(int cs, int cmd); +extern int gpmc_nand_write(int cs, int cmd, int wval); +int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size); +int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code); #endif diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h index 0752af9d099e..33c7d41cb6a5 100644 --- a/arch/arm/plat-omap/include/plat/iommu.h +++ b/arch/arm/plat-omap/include/plat/iommu.h @@ -80,6 +80,7 @@ struct iommu_functions { int (*enable)(struct iommu *obj); void (*disable)(struct iommu *obj); + void (*set_twl)(struct iommu *obj, bool on); u32 (*fault_isr)(struct iommu *obj, u32 *ra); void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr); @@ -143,6 +144,7 @@ extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e); extern u32 iotlb_cr_to_virt(struct cr_regs *cr); extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e); +extern void iommu_set_twl(struct iommu *obj, bool on); extern void flush_iotlb_page(struct iommu *obj, u32 da); extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end); extern void flush_iotlb_all(struct iommu *obj); diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h index 729166b76a7c..997656552109 100644 --- a/arch/arm/plat-omap/include/plat/mailbox.h +++ b/arch/arm/plat-omap/include/plat/mailbox.h @@ -3,10 +3,11 @@ #ifndef MAILBOX_H #define MAILBOX_H -#include <linux/wait.h> +#include <linux/spinlock.h> #include <linux/workqueue.h> -#include <linux/blkdev.h> #include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/kfifo.h> typedef u32 mbox_msg_t; struct omap_mbox; @@ -42,7 +43,7 @@ struct omap_mbox_ops { struct omap_mbox_queue { spinlock_t lock; - struct request_queue *queue; + struct kfifo fifo; struct work_struct work; struct tasklet_struct tasklet; int (*callback)(void *); @@ -52,19 +53,10 @@ struct omap_mbox_queue { struct omap_mbox { char *name; unsigned int irq; - struct omap_mbox_queue *txq, *rxq; - struct omap_mbox_ops *ops; - - mbox_msg_t seq_snd, seq_rcv; - struct device *dev; - - struct omap_mbox *next; void *priv; - - void (*err_notify)(void); }; int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg); @@ -73,8 +65,8 @@ void omap_mbox_init_seq(struct omap_mbox *); struct omap_mbox *omap_mbox_get(const char *); void omap_mbox_put(struct omap_mbox *); -int omap_mbox_register(struct device *parent, struct omap_mbox *); -int omap_mbox_unregister(struct omap_mbox *); +int omap_mbox_register(struct device *parent, struct omap_mbox **); +int omap_mbox_unregister(void); static inline void omap_mbox_save_ctx(struct omap_mbox *mbox) { diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 975744f10a58..b4ff6a11a8f2 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -473,6 +473,7 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); +u16 omap_mcbsp_get_fifo_size(unsigned int id); u16 omap_mcbsp_get_tx_delay(unsigned int id); u16 omap_mcbsp_get_rx_delay(unsigned int id); int omap_mcbsp_get_dma_op_mode(unsigned int id); @@ -483,6 +484,7 @@ static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) { } static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } +static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; } static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; } static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; } static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index c7472a28ce24..aeba71796ad9 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -114,28 +114,11 @@ PU_PD_REG(NA, 0) \ }, -#define MUX_CFG_24XX(desc, reg_offset, mode, \ - pull_en, pull_mode, dbg) \ -{ \ - .name = desc, \ - .debug = dbg, \ - .mux_reg = reg_offset, \ - .mask = mode, \ - .pull_val = pull_en, \ - .pu_pd_val = pull_mode, \ -}, - -/* 24xx/34xx mux bit defines */ -#define OMAP2_PULL_ENA (1 << 3) -#define OMAP2_PULL_UP (1 << 4) -#define OMAP2_ALTELECTRICALSEL (1 << 5) - struct pin_config { char *name; const unsigned int mux_reg; unsigned char debug; -#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2) const unsigned char mask_offset; const unsigned char mask; @@ -147,7 +130,6 @@ struct pin_config { const char *pu_pd_name; const unsigned int pu_pd_reg; const unsigned char pu_pd_val; -#endif #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) const char *mux_reg_name; @@ -191,6 +173,10 @@ enum omap7xx_index { SPI_7XX_4, SPI_7XX_5, SPI_7XX_6, + + /* UART */ + UART_7XX_1, + UART_7XX_2, }; enum omap1xxx_index { @@ -446,208 +432,6 @@ enum omap1xxx_index { }; -enum omap24xx_index { - /* 24xx I2C */ - M19_24XX_I2C1_SCL, - L15_24XX_I2C1_SDA, - J15_24XX_I2C2_SCL, - H19_24XX_I2C2_SDA, - - /* 24xx Menelaus interrupt */ - W19_24XX_SYS_NIRQ, - - /* 24xx clock */ - W14_24XX_SYS_CLKOUT, - - /* 24xx GPMC chipselects, wait pin monitoring */ - E2_GPMC_NCS2, - L2_GPMC_NCS7, - L3_GPMC_WAIT0, - N7_GPMC_WAIT1, - M1_GPMC_WAIT2, - P1_GPMC_WAIT3, - - /* 242X McBSP */ - Y15_24XX_MCBSP2_CLKX, - R14_24XX_MCBSP2_FSX, - W15_24XX_MCBSP2_DR, - V15_24XX_MCBSP2_DX, - - /* 24xx GPIO */ - M21_242X_GPIO11, - P21_242X_GPIO12, - AA10_242X_GPIO13, - AA6_242X_GPIO14, - AA4_242X_GPIO15, - Y11_242X_GPIO16, - AA12_242X_GPIO17, - AA8_242X_GPIO58, - Y20_24XX_GPIO60, - W4__24XX_GPIO74, - N15_24XX_GPIO85, - M15_24XX_GPIO92, - P20_24XX_GPIO93, - P18_24XX_GPIO95, - M18_24XX_GPIO96, - L14_24XX_GPIO97, - J15_24XX_GPIO99, - V14_24XX_GPIO117, - P14_24XX_GPIO125, - - /* 242x DBG GPIO */ - V4_242X_GPIO49, - W2_242X_GPIO50, - U4_242X_GPIO51, - V3_242X_GPIO52, - V2_242X_GPIO53, - V6_242X_GPIO53, - T4_242X_GPIO54, - Y4_242X_GPIO54, - T3_242X_GPIO55, - U2_242X_GPIO56, - - /* 24xx external DMA requests */ - AA10_242X_DMAREQ0, - AA6_242X_DMAREQ1, - E4_242X_DMAREQ2, - G4_242X_DMAREQ3, - D3_242X_DMAREQ4, - E3_242X_DMAREQ5, - - /* UART3 */ - K15_24XX_UART3_TX, - K14_24XX_UART3_RX, - - /* MMC/SDIO */ - G19_24XX_MMC_CLKO, - H18_24XX_MMC_CMD, - F20_24XX_MMC_DAT0, - H14_24XX_MMC_DAT1, - E19_24XX_MMC_DAT2, - D19_24XX_MMC_DAT3, - F19_24XX_MMC_DAT_DIR0, - E20_24XX_MMC_DAT_DIR1, - F18_24XX_MMC_DAT_DIR2, - E18_24XX_MMC_DAT_DIR3, - G18_24XX_MMC_CMD_DIR, - H15_24XX_MMC_CLKI, - - /* Full speed USB */ - J20_24XX_USB0_PUEN, - J19_24XX_USB0_VP, - K20_24XX_USB0_VM, - J18_24XX_USB0_RCV, - K19_24XX_USB0_TXEN, - J14_24XX_USB0_SE0, - K18_24XX_USB0_DAT, - - N14_24XX_USB1_SE0, - W12_24XX_USB1_SE0, - P15_24XX_USB1_DAT, - R13_24XX_USB1_DAT, - W20_24XX_USB1_TXEN, - P13_24XX_USB1_TXEN, - V19_24XX_USB1_RCV, - V12_24XX_USB1_RCV, - - AA10_24XX_USB2_SE0, - Y11_24XX_USB2_DAT, - AA12_24XX_USB2_TXEN, - AA6_24XX_USB2_RCV, - AA4_24XX_USB2_TLLSE0, - - /* Keypad GPIO*/ - T19_24XX_KBR0, - R19_24XX_KBR1, - V18_24XX_KBR2, - M21_24XX_KBR3, - E5__24XX_KBR4, - M18_24XX_KBR5, - R20_24XX_KBC0, - M14_24XX_KBC1, - H19_24XX_KBC2, - V17_24XX_KBC3, - P21_24XX_KBC4, - L14_24XX_KBC5, - N19_24XX_KBC6, - - /* 24xx Menelaus Keypad GPIO */ - B3__24XX_KBR5, - AA4_24XX_KBC2, - B13_24XX_KBC6, - - /* 2430 USB */ - AD9_2430_USB0_PUEN, - Y11_2430_USB0_VP, - AD7_2430_USB0_VM, - AE7_2430_USB0_RCV, - AD4_2430_USB0_TXEN, - AF9_2430_USB0_SE0, - AE6_2430_USB0_DAT, - AD24_2430_USB1_SE0, - AB24_2430_USB1_RCV, - Y25_2430_USB1_TXEN, - AA26_2430_USB1_DAT, - - /* 2430 HS-USB */ - AD9_2430_USB0HS_DATA3, - Y11_2430_USB0HS_DATA4, - AD7_2430_USB0HS_DATA5, - AE7_2430_USB0HS_DATA6, - AD4_2430_USB0HS_DATA2, - AF9_2430_USB0HS_DATA0, - AE6_2430_USB0HS_DATA1, - AE8_2430_USB0HS_CLK, - AD8_2430_USB0HS_DIR, - AE5_2430_USB0HS_STP, - AE9_2430_USB0HS_NXT, - AC7_2430_USB0HS_DATA7, - - /* 2430 McBSP */ - AD6_2430_MCBSP_CLKS, - - AB2_2430_MCBSP1_CLKR, - AD5_2430_MCBSP1_FSR, - AA1_2430_MCBSP1_DX, - AF3_2430_MCBSP1_DR, - AB3_2430_MCBSP1_FSX, - Y9_2430_MCBSP1_CLKX, - - AC10_2430_MCBSP2_FSX, - AD16_2430_MCBSP2_CLX, - AE13_2430_MCBSP2_DX, - AD13_2430_MCBSP2_DR, - AC10_2430_MCBSP2_FSX_OFF, - AD16_2430_MCBSP2_CLX_OFF, - AE13_2430_MCBSP2_DX_OFF, - AD13_2430_MCBSP2_DR_OFF, - - AC9_2430_MCBSP3_CLKX, - AE4_2430_MCBSP3_FSX, - AE2_2430_MCBSP3_DR, - AF4_2430_MCBSP3_DX, - - N3_2430_MCBSP4_CLKX, - AD23_2430_MCBSP4_DR, - AB25_2430_MCBSP4_DX, - AC25_2430_MCBSP4_FSX, - - AE16_2430_MCBSP5_CLKX, - AF12_2430_MCBSP5_FSX, - K7_2430_MCBSP5_DX, - M1_2430_MCBSP5_DR, - - /* 2430 McSPI*/ - Y18_2430_MCSPI1_CLK, - AD15_2430_MCSPI1_SIMO, - AE17_2430_MCSPI1_SOMI, - U1_2430_MCSPI1_CS0, - - /* Touchscreen GPIO */ - AF19_2430_GPIO_85, - -}; - struct omap_mux_cfg { struct pin_config *pins; unsigned long size; diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index f8efd5466b1d..6562cd082bb1 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -21,13 +21,11 @@ struct omap_nand_platform_data { int (*dev_ready)(struct omap_nand_platform_data *); int dma_channel; unsigned long phys_base; - void __iomem *gpmc_cs_baseaddr; - void __iomem *gpmc_baseaddr; int devsize; }; -/* size (4 KiB) for IO mapping */ -#define NAND_IO_SIZE SZ_4K +/* minimum size for IO mapping */ +#define NAND_IO_SIZE 4 #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern int gpmc_nand_init(struct omap_nand_platform_data *d); diff --git a/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h new file mode 100644 index 000000000000..01ab6572ccbb --- /dev/null +++ b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h @@ -0,0 +1,31 @@ +#ifndef __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H +#define __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H + +#include "display.h" + +/** + * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration + * @name: panel name + * @use_ext_te: use external TE + * @ext_te_gpio: external TE GPIO + * @use_esd_check: perform ESD checks + * @max_backlight_level: maximum backlight level + * @set_backlight: pointer to backlight set function + * @get_backlight: pointer to backlight get function + */ +struct nokia_dsi_panel_data { + const char *name; + + int reset_gpio; + + bool use_ext_te; + int ext_te_gpio; + + bool use_esd_check; + + int max_backlight_level; + int (*set_backlight)(struct omap_dss_device *dssdev, int level); + int (*get_backlight)(struct omap_dss_device *dssdev); +}; + +#endif /* __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H */ diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index 3ee41d711492..728fbb9dd549 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -1,8 +1,8 @@ /* * omap-pm.h - OMAP power management interface * - * Copyright (C) 2008-2009 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation + * Copyright (C) 2008-2010 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * * Interface developed by (in alphabetical order): Karthik Dasu, Jouni @@ -16,6 +16,7 @@ #include <linux/device.h> #include <linux/cpufreq.h> +#include <linux/clk.h> #include "powerdomain.h" @@ -89,7 +90,7 @@ void omap_pm_if_exit(void); * @t: maximum MPU wakeup latency in microseconds * * Request that the maximum interrupt latency for the MPU to be no - * greater than 't' microseconds. "Interrupt latency" in this case is + * greater than @t microseconds. "Interrupt latency" in this case is * defined as the elapsed time from the occurrence of a hardware or * timer interrupt to the time when the device driver's interrupt * service routine has been entered by the MPU. @@ -105,15 +106,19 @@ void omap_pm_if_exit(void); * elapsed from when a device driver enables a hardware device with * clk_enable(), to when the device is ready for register access or * other use. To control this device wakeup latency, use - * set_max_dev_wakeup_lat() + * omap_pm_set_max_dev_wakeup_lat() * - * Multiple calls to set_max_mpu_wakeup_lat() will replace the + * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the * previous t value. To remove the latency target for the MPU, call * with t = -1. * - * No return value. + * XXX This constraint will be deprecated soon in favor of the more + * general omap_pm_set_max_dev_wakeup_lat() + * + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); +int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); /** @@ -123,8 +128,8 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); * @r: minimum throughput (in KiB/s) * * Request that the minimum data throughput on the OCP interconnect - * attached to device 'dev' interconnect agent 'tbus_id' be no less - * than 'r' KiB/s. + * attached to device @dev interconnect agent @tbus_id be no less + * than @r KiB/s. * * It is expected that the OMAP PM or bus code will use this * information to set the interconnect clock to run at the lowest @@ -138,40 +143,44 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); * code will also need to add an minimum L3 interconnect speed * constraint, * - * Multiple calls to set_min_bus_tput() will replace the previous rate - * value for this device. To remove the interconnect throughput - * restriction for this device, call with r = 0. + * Multiple calls to omap_pm_set_min_bus_tput() will replace the + * previous rate value for this device. To remove the interconnect + * throughput restriction for this device, call with r = 0. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); +int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); /** * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency - * @dev: struct device * + * @req_dev: struct device * requesting the constraint, or NULL if none + * @dev: struct device * to set the constraint one * @t: maximum device wakeup latency in microseconds * - * Request that the maximum amount of time necessary for a device to - * become accessible after its clocks are enabled should be no greater - * than 't' microseconds. Specifically, this represents the time from - * when a device driver enables device clocks with clk_enable(), to - * when the register reads and writes on the device will succeed. - * This function should be called before clk_disable() is called, - * since the power state transition decision may be made during - * clk_disable(). + * Request that the maximum amount of time necessary for a device @dev + * to become accessible after its clocks are enabled should be no + * greater than @t microseconds. Specifically, this represents the + * time from when a device driver enables device clocks with + * clk_enable(), to when the register reads and writes on the device + * will succeed. This function should be called before clk_disable() + * is called, since the power state transition decision may be made + * during clk_disable(). * * It is intended that underlying PM code will use this information to * determine what power state to put the powerdomain enclosing this * device into. * - * Multiple calls to set_max_dev_wakeup_lat() will replace the - * previous wakeup latency values for this device. To remove the wakeup - * latency restriction for this device, call with t = -1. + * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the + * previous wakeup latency values for this device. To remove the + * wakeup latency restriction for this device, call with t = -1. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); +int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, + long t); /** @@ -198,10 +207,71 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); * value for this device. To remove the maximum DMA latency for this * device, call with t = -1. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_sdma_lat(struct device *dev, long t); +int omap_pm_set_max_sdma_lat(struct device *dev, long t); + +/** + * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev + * @dev: struct device * requesting the constraint + * @clk: struct clk * to set the minimum rate constraint on + * @r: minimum rate in Hz + * + * Request that the minimum clock rate on the device @dev's clk @clk + * be no less than @r Hz. + * + * It is expected that the OMAP PM code will use this information to + * find an OPP or clock setting that will satisfy this clock rate + * constraint, along with any other applicable system constraints on + * the clock rate or corresponding voltage, etc. + * + * omap_pm_set_min_clk_rate() differs from the clock code's + * clk_set_rate() in that it considers other constraints before taking + * any hardware action, and may change a system OPP rather than just a + * clock rate. clk_set_rate() is intended to be a low-level + * interface. + * + * omap_pm_set_min_clk_rate() is easily open to abuse. A better API + * would be something like "omap_pm_set_min_dev_performance()"; + * however, there is no easily-generalizable concept of performance + * that applies to all devices. Only a device (and possibly the + * device subsystem) has both the subsystem-specific knowledge, and + * the hardware IP block-specific knowledge, to translate a constraint + * on "touchscreen sampling accuracy" or "number of pixels or polygons + * rendered per second" to a clock rate. This translation can be + * dependent on the hardware IP block's revision, or firmware version, + * and the driver is the only code on the system that has this + * information and can know how to translate that into a clock rate. + * + * The intended use-case for this function is for userspace or other + * kernel code to communicate a particular performance requirement to + * a subsystem; then for the subsystem to communicate that requirement + * to something that is meaningful to the device driver; then for the + * device driver to convert that requirement to a clock rate, and to + * then call omap_pm_set_min_clk_rate(). + * + * Users of this function (such as device drivers) should not simply + * call this function with some high clock rate to ensure "high + * performance." Rather, the device driver should take a performance + * constraint from its subsystem, such as "render at least X polygons + * per second," and use some formula or table to convert that into a + * clock rate constraint given the hardware type and hardware + * revision. Device drivers or subsystems should not assume that they + * know how to make a power/performance tradeoff - some device use + * cases may tolerate a lower-fidelity device function for lower power + * consumption; others may demand a higher-fidelity device function, + * no matter what the power consumption. + * + * Multiple calls to omap_pm_set_min_clk_rate() will replace the + * previous rate value for the device @dev. To remove the minimum clock + * rate constraint for the device, call with r = 0. + * + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. + */ +int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r); /* * DSP Bridge-specific constraints diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 3694b622c4ac..25cd9ac3b095 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -101,6 +101,8 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, int omap_device_register(struct omap_device *od); int omap_early_device_register(struct omap_device *od); +void __iomem *omap_device_get_rt_va(struct omap_device *od); + /* OMAP PM interface */ int omap_device_align_pm_lat(struct platform_device *pdev, u32 new_wakeup_lat_limit); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 0eccc09ac4a9..a4e508dfaba2 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -1,7 +1,7 @@ /* * omap_hwmod macros, structures * - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Nokia Corporation * Paul Walmsley * * Created in collaboration with (alphabetical order): Benoît Cousson, @@ -419,7 +419,7 @@ struct omap_hwmod_class { * @slaves: ptr to array of OCP ifs that this hwmod can respond on * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags - * @_rt_va: cached register target start address (internal use) + * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port_index: cached MPU register target slave ID (internal use) * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6) * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift @@ -460,7 +460,7 @@ struct omap_hwmod { struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ void *dev_attr; u32 _sysc_cache; - void __iomem *_rt_va; + void __iomem *_mpu_rt_va; struct list_head node; u16 flags; u8 _mpu_port_index; @@ -482,11 +482,14 @@ int omap_hwmod_init(struct omap_hwmod **ohs); int omap_hwmod_register(struct omap_hwmod *oh); int omap_hwmod_unregister(struct omap_hwmod *oh); struct omap_hwmod *omap_hwmod_lookup(const char *name); -int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)); -int omap_hwmod_late_init(void); +int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), + void *data); +int omap_hwmod_late_init(u8 skip_setup_idle); int omap_hwmod_enable(struct omap_hwmod *oh); +int _omap_hwmod_enable(struct omap_hwmod *oh); int omap_hwmod_idle(struct omap_hwmod *oh); +int _omap_hwmod_idle(struct omap_hwmod *oh); int omap_hwmod_shutdown(struct omap_hwmod *oh); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); @@ -504,6 +507,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); +void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh); diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h index 8983d54c4fd2..6a3ff65c0303 100644 --- a/arch/arm/plat-omap/include/plat/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -30,6 +30,7 @@ extern void omap_secondary_startup(void); extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); extern void omap_auxcoreboot_addr(u32 cpu_addr); +extern u32 omap_read_auxcoreboot0(void); /* * We use Soft IRQ1 as the IPI diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index bbedd71943f6..ddf723be48dc 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -25,6 +25,8 @@ #include <plat/serial.h> +#define MDR1_MODE_MASK 0x07 + static volatile u8 *uart_base; static int uart_shift; @@ -42,6 +44,10 @@ static void putc(int c) if (!uart_base) return; + /* Check for UART 16x mode */ + if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0) + return; + while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE)) barrier(); uart_base[UART_TX << uart_shift] = c; diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 98eef5360e6d..2a9427c8cc48 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -81,7 +81,34 @@ extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata); #endif -void omap_usb_init(struct omap_usb_config *pdata); + +/* + * FIXME correct answer depends on hmc_mode, + * as does (on omap1) any nonzero value for config->otg port number + */ +#ifdef CONFIG_USB_GADGET_OMAP +#define is_usb0_device(config) 1 +#else +#define is_usb0_device(config) 0 +#endif + +void omap_otg_init(struct omap_usb_config *config); + +#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) +void omap1_usb_init(struct omap_usb_config *pdata); +#else +static inline void omap1_usb_init(struct omap_usb_config *pdata) +{ +} +#endif + +#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) +void omap2_usbfs_init(struct omap_usb_config *pdata); +#else +static inline omap2_usbfs_init(struct omap_usb_config *pdata) +{ +} +#endif /*-------------------------------------------------------------------------*/ @@ -192,4 +219,24 @@ void omap_usb_init(struct omap_usb_config *pdata); # define USB0PUENACTLOI (1 << 16) # define USBSTANDBYCTRL (1 << 15) +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) +u32 omap1_usb0_init(unsigned nwires, unsigned is_device); +u32 omap1_usb1_init(unsigned nwires); +u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup); +#else +static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device) +{ + return 0; +} +static inline u32 omap1_usb1_init(unsigned nwires) +{ + return 0; + +} +static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +{ + return 0; +} +#endif + #endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index bc094dbacee6..a202a2ce6e3d 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -370,6 +370,23 @@ void flush_iotlb_all(struct iommu *obj) } EXPORT_SYMBOL_GPL(flush_iotlb_all); +/** + * iommu_set_twl - enable/disable table walking logic + * @obj: target iommu + * @on: enable/disable + * + * Function used to enable/disable TWL. If one wants to work + * exclusively with locked TLB entries and receive notifications + * for TLB miss then call this function to disable TWL. + */ +void iommu_set_twl(struct iommu *obj, bool on) +{ + clk_enable(obj->clk); + arch_iommu->set_twl(obj, on); + clk_disable(obj->clk); +} +EXPORT_SYMBOL_GPL(iommu_set_twl); + #if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE) ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t bytes) @@ -653,7 +670,7 @@ void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte) if (!*iopgd) goto out; - if (*iopgd & IOPGD_TABLE) + if (iopgd_is_table(*iopgd)) iopte = iopte_offset(iopgd, da); out: *ppgd = iopgd; @@ -670,7 +687,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da) if (!*iopgd) return 0; - if (*iopgd & IOPGD_TABLE) { + if (iopgd_is_table(*iopgd)) { int i; u32 *iopte = iopte_offset(iopgd, da); @@ -745,7 +762,7 @@ static void iopgtable_clear_entry_all(struct iommu *obj) if (!*iopgd) continue; - if (*iopgd & IOPGD_TABLE) + if (iopgd_is_table(*iopgd)) iopte_free(iopte_offset(iopgd, 0)); *iopgd = 0; @@ -783,9 +800,11 @@ static irqreturn_t iommu_fault_handler(int irq, void *data) if (!stat) return IRQ_HANDLED; + iommu_disable(obj); + iopgd = iopgd_offset(obj, da); - if (!(*iopgd & IOPGD_TABLE)) { + if (!iopgd_is_table(*iopgd)) { dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__, da, iopgd, *iopgd); return IRQ_NONE; diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h index ab23b6a140fd..c3e93bb0911f 100644 --- a/arch/arm/plat-omap/iopgtable.h +++ b/arch/arm/plat-omap/iopgtable.h @@ -63,6 +63,8 @@ #define IOPGD_SECTION (2 << 0) #define IOPGD_SUPER (1 << 18 | 2 << 0) +#define iopgd_is_table(x) (((x) & 3) == IOPGD_TABLE) + #define IOPTE_SMALL (2 << 0) #define IOPTE_LARGE (1 << 0) @@ -70,12 +72,12 @@ #define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1)) #define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da)) -#define iopte_paddr(iopgd) (*iopgd & ~((1 << 10) - 1)) -#define iopte_vaddr(iopgd) ((u32 *)phys_to_virt(iopte_paddr(iopgd))) +#define iopgd_page_paddr(iopgd) (*iopgd & ~((1 << 10) - 1)) +#define iopgd_page_vaddr(iopgd) ((u32 *)phys_to_virt(iopgd_page_paddr(iopgd))) /* to find an entry in the second-level page table. */ #define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1)) -#define iopte_offset(iopgd, da) (iopte_vaddr(iopgd) + iopte_index(da)) +#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da)) static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa, u32 flags) diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 08a2df766289..d2fafb892f7f 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -21,19 +21,26 @@ * */ -#include <linux/module.h> #include <linux/interrupt.h> -#include <linux/device.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/kfifo.h> +#include <linux/err.h> #include <plat/mailbox.h> static struct workqueue_struct *mboxd; -static struct omap_mbox *mboxes; -static DEFINE_RWLOCK(mboxes_lock); +static struct omap_mbox **mboxes; +static bool rq_full; static int mbox_configured; +static DEFINE_MUTEX(mbox_configured_lock); + +static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE; +module_param(mbox_kfifo_size, uint, S_IRUGO); +MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)"); /* Mailbox FIFO handle functions */ static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox) @@ -67,7 +74,7 @@ static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq) /* * message sender */ -static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) +static int __mbox_poll_for_space(struct omap_mbox *mbox) { int ret = 0, i = 1000; @@ -78,49 +85,50 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) return -1; udelay(1); } - mbox_fifo_write(mbox, msg); return ret; } - int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg) { + struct omap_mbox_queue *mq = mbox->txq; + int ret = 0, len; - struct request *rq; - struct request_queue *q = mbox->txq->queue; + spin_lock(&mq->lock); - rq = blk_get_request(q, WRITE, GFP_ATOMIC); - if (unlikely(!rq)) - return -ENOMEM; + if (kfifo_avail(&mq->fifo) < sizeof(msg)) { + ret = -ENOMEM; + goto out; + } + + len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); + WARN_ON(len != sizeof(msg)); - blk_insert_request(q, rq, 0, (void *) msg); tasklet_schedule(&mbox->txq->tasklet); - return 0; +out: + spin_unlock(&mq->lock); + return ret; } EXPORT_SYMBOL(omap_mbox_msg_send); static void mbox_tx_tasklet(unsigned long tx_data) { - int ret; - struct request *rq; struct omap_mbox *mbox = (struct omap_mbox *)tx_data; - struct request_queue *q = mbox->txq->queue; - - while (1) { - - rq = blk_fetch_request(q); - - if (!rq) - break; + struct omap_mbox_queue *mq = mbox->txq; + mbox_msg_t msg; + int ret; - ret = __mbox_msg_send(mbox, (mbox_msg_t)rq->special); - if (ret) { + while (kfifo_len(&mq->fifo)) { + if (__mbox_poll_for_space(mbox)) { omap_mbox_enable_irq(mbox, IRQ_TX); - blk_requeue_request(q, rq); - return; + break; } - blk_end_request_all(rq, 0); + + ret = kfifo_out(&mq->fifo, (unsigned char *)&msg, + sizeof(msg)); + WARN_ON(ret != sizeof(msg)); + + mbox_fifo_write(mbox, msg); } } @@ -131,36 +139,21 @@ static void mbox_rx_work(struct work_struct *work) { struct omap_mbox_queue *mq = container_of(work, struct omap_mbox_queue, work); - struct omap_mbox *mbox = mq->queue->queuedata; - struct request_queue *q = mbox->rxq->queue; - struct request *rq; mbox_msg_t msg; - unsigned long flags; + int len; - while (1) { - spin_lock_irqsave(q->queue_lock, flags); - rq = blk_fetch_request(q); - spin_unlock_irqrestore(q->queue_lock, flags); - if (!rq) - break; + while (kfifo_len(&mq->fifo) >= sizeof(msg)) { + len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); + WARN_ON(len != sizeof(msg)); - msg = (mbox_msg_t)rq->special; - blk_end_request_all(rq, 0); - mbox->rxq->callback((void *)msg); + if (mq->callback) + mq->callback((void *)msg); } } /* * Mailbox interrupt handler */ -static void mbox_txq_fn(struct request_queue *q) -{ -} - -static void mbox_rxq_fn(struct request_queue *q) -{ -} - static void __mbox_tx_interrupt(struct omap_mbox *mbox) { omap_mbox_disable_irq(mbox, IRQ_TX); @@ -170,19 +163,22 @@ static void __mbox_tx_interrupt(struct omap_mbox *mbox) static void __mbox_rx_interrupt(struct omap_mbox *mbox) { - struct request *rq; + struct omap_mbox_queue *mq = mbox->rxq; mbox_msg_t msg; - struct request_queue *q = mbox->rxq->queue; + int len; while (!mbox_fifo_empty(mbox)) { - rq = blk_get_request(q, WRITE, GFP_ATOMIC); - if (unlikely(!rq)) + if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) { + omap_mbox_disable_irq(mbox, IRQ_RX); + rq_full = true; goto nomem; + } msg = mbox_fifo_read(mbox); + len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg)); + WARN_ON(len != sizeof(msg)); - blk_insert_request(q, rq, 0, (void *)msg); if (mbox->ops->type == OMAP_MBOX_TYPE1) break; } @@ -207,11 +203,9 @@ static irqreturn_t mbox_interrupt(int irq, void *p) } static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, - request_fn_proc *proc, void (*work) (struct work_struct *), void (*tasklet)(unsigned long)) { - struct request_queue *q; struct omap_mbox_queue *mq; mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL); @@ -220,11 +214,8 @@ static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox, spin_lock_init(&mq->lock); - q = blk_init_queue(proc, &mq->lock); - if (!q) + if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL)) goto error; - q->queuedata = mbox; - mq->queue = q; if (work) INIT_WORK(&mq->work, work); @@ -239,7 +230,7 @@ error: static void mbox_queue_free(struct omap_mbox_queue *q) { - blk_cleanup_queue(q->queue); + kfifo_free(&q->fifo); kfree(q); } @@ -248,35 +239,35 @@ static int omap_mbox_startup(struct omap_mbox *mbox) int ret = 0; struct omap_mbox_queue *mq; - if (likely(mbox->ops->startup)) { - write_lock(&mboxes_lock); + if (mbox->ops->startup) { + mutex_lock(&mbox_configured_lock); if (!mbox_configured) ret = mbox->ops->startup(mbox); - if (unlikely(ret)) { - write_unlock(&mboxes_lock); + if (ret) { + mutex_unlock(&mbox_configured_lock); return ret; } mbox_configured++; - write_unlock(&mboxes_lock); + mutex_unlock(&mbox_configured_lock); } ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED, mbox->name, mbox); - if (unlikely(ret)) { + if (ret) { printk(KERN_ERR "failed to register mailbox interrupt:%d\n", ret); goto fail_request_irq; } - mq = mbox_queue_alloc(mbox, mbox_txq_fn, NULL, mbox_tx_tasklet); + mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet); if (!mq) { ret = -ENOMEM; goto fail_alloc_txq; } mbox->txq = mq; - mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work, NULL); + mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL); if (!mq) { ret = -ENOMEM; goto fail_alloc_rxq; @@ -290,7 +281,7 @@ static int omap_mbox_startup(struct omap_mbox *mbox) fail_alloc_txq: free_irq(mbox->irq, mbox); fail_request_irq: - if (unlikely(mbox->ops->shutdown)) + if (mbox->ops->shutdown) mbox->ops->shutdown(mbox); return ret; @@ -298,31 +289,20 @@ static int omap_mbox_startup(struct omap_mbox *mbox) static void omap_mbox_fini(struct omap_mbox *mbox) { + free_irq(mbox->irq, mbox); + tasklet_kill(&mbox->txq->tasklet); + flush_work(&mbox->rxq->work); mbox_queue_free(mbox->txq); mbox_queue_free(mbox->rxq); - free_irq(mbox->irq, mbox); - - if (unlikely(mbox->ops->shutdown)) { - write_lock(&mboxes_lock); + if (mbox->ops->shutdown) { + mutex_lock(&mbox_configured_lock); if (mbox_configured > 0) mbox_configured--; if (!mbox_configured) mbox->ops->shutdown(mbox); - write_unlock(&mboxes_lock); - } -} - -static struct omap_mbox **find_mboxes(const char *name) -{ - struct omap_mbox **p; - - for (p = &mboxes; *p; p = &(*p)->next) { - if (strcmp((*p)->name, name) == 0) - break; + mutex_unlock(&mbox_configured_lock); } - - return p; } struct omap_mbox *omap_mbox_get(const char *name) @@ -330,14 +310,15 @@ struct omap_mbox *omap_mbox_get(const char *name) struct omap_mbox *mbox; int ret; - read_lock(&mboxes_lock); - mbox = *(find_mboxes(name)); - if (mbox == NULL) { - read_unlock(&mboxes_lock); - return ERR_PTR(-ENOENT); - } + if (!mboxes) + return ERR_PTR(-EINVAL); - read_unlock(&mboxes_lock); + for (mbox = *mboxes; mbox; mbox++) + if (!strcmp(mbox->name, name)) + break; + + if (!mbox) + return ERR_PTR(-ENOENT); ret = omap_mbox_startup(mbox); if (ret) @@ -353,70 +334,77 @@ void omap_mbox_put(struct omap_mbox *mbox) } EXPORT_SYMBOL(omap_mbox_put); -int omap_mbox_register(struct device *parent, struct omap_mbox *mbox) +static struct class omap_mbox_class = { .name = "mbox", }; + +int omap_mbox_register(struct device *parent, struct omap_mbox **list) { - int ret = 0; - struct omap_mbox **tmp; + int ret; + int i; - if (!mbox) + mboxes = list; + if (!mboxes) return -EINVAL; - if (mbox->next) - return -EBUSY; - - write_lock(&mboxes_lock); - tmp = find_mboxes(mbox->name); - if (*tmp) { - ret = -EBUSY; - write_unlock(&mboxes_lock); - goto err_find; - } - *tmp = mbox; - write_unlock(&mboxes_lock); + for (i = 0; mboxes[i]; i++) { + struct omap_mbox *mbox = mboxes[i]; + mbox->dev = device_create(&omap_mbox_class, + parent, 0, mbox, "%s", mbox->name); + if (IS_ERR(mbox->dev)) { + ret = PTR_ERR(mbox->dev); + goto err_out; + } + } return 0; -err_find: +err_out: + while (i--) + device_unregister(mboxes[i]->dev); return ret; } EXPORT_SYMBOL(omap_mbox_register); -int omap_mbox_unregister(struct omap_mbox *mbox) +int omap_mbox_unregister(void) { - struct omap_mbox **tmp; - - write_lock(&mboxes_lock); - tmp = &mboxes; - while (*tmp) { - if (mbox == *tmp) { - *tmp = mbox->next; - mbox->next = NULL; - write_unlock(&mboxes_lock); - return 0; - } - tmp = &(*tmp)->next; - } - write_unlock(&mboxes_lock); + int i; + + if (!mboxes) + return -EINVAL; - return -EINVAL; + for (i = 0; mboxes[i]; i++) + device_unregister(mboxes[i]->dev); + mboxes = NULL; + return 0; } EXPORT_SYMBOL(omap_mbox_unregister); static int __init omap_mbox_init(void) { + int err; + + err = class_register(&omap_mbox_class); + if (err) + return err; + mboxd = create_workqueue("mboxd"); if (!mboxd) return -ENOMEM; + /* kfifo size sanity check: alignment and minimal size */ + mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t)); + mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size, sizeof(mbox_msg_t)); + return 0; } -module_init(omap_mbox_init); +subsys_initcall(omap_mbox_init); static void __exit omap_mbox_exit(void) { destroy_workqueue(mboxd); + class_unregister(&omap_mbox_class); } module_exit(omap_mbox_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging"); -MODULE_AUTHOR("Toshihiro Kobayashi and Hiroshi DOYU"); +MODULE_AUTHOR("Toshihiro Kobayashi"); +MODULE_AUTHOR("Hiroshi DOYU"); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 7e669c9744d8..e31496e35b0f 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -481,9 +481,9 @@ int omap_st_is_enabled(unsigned int id) EXPORT_SYMBOL(omap_st_is_enabled); /* - * omap_mcbsp_set_tx_threshold configures how to deal - * with transmit threshold. the threshold value and handler can be - * configure in here. + * omap_mcbsp_set_rx_threshold configures the transmit threshold in words. + * The threshold parameter is 1 based, and it is converted (threshold - 1) + * for the THRSH2 register. */ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) { @@ -498,14 +498,15 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) } mcbsp = id_to_mcbsp_ptr(id); - MCBSP_WRITE(mcbsp, THRSH2, threshold); + if (threshold && threshold <= mcbsp->max_tx_thres) + MCBSP_WRITE(mcbsp, THRSH2, threshold - 1); } EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold); /* - * omap_mcbsp_set_rx_threshold configures how to deal - * with receive threshold. the threshold value and handler can be - * configure in here. + * omap_mcbsp_set_rx_threshold configures the receive threshold in words. + * The threshold parameter is 1 based, and it is converted (threshold - 1) + * for the THRSH1 register. */ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) { @@ -520,7 +521,8 @@ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) } mcbsp = id_to_mcbsp_ptr(id); - MCBSP_WRITE(mcbsp, THRSH1, threshold); + if (threshold && threshold <= mcbsp->max_rx_thres) + MCBSP_WRITE(mcbsp, THRSH1, threshold - 1); } EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold); @@ -560,8 +562,20 @@ u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) } EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold); -#define MCBSP2_FIFO_SIZE 0x500 /* 1024 + 256 locations */ -#define MCBSP1345_FIFO_SIZE 0x80 /* 128 locations */ +u16 omap_mcbsp_get_fifo_size(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + return mcbsp->pdata->buffer_size; +} +EXPORT_SYMBOL(omap_mcbsp_get_fifo_size); + /* * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO */ @@ -580,10 +594,7 @@ u16 omap_mcbsp_get_tx_delay(unsigned int id) buffstat = MCBSP_READ(mcbsp, XBUFFSTAT); /* Number of slots are different in McBSP ports */ - if (mcbsp->id == 2) - return MCBSP2_FIFO_SIZE - buffstat; - else - return MCBSP1345_FIFO_SIZE - buffstat; + return mcbsp->pdata->buffer_size - buffstat; } EXPORT_SYMBOL(omap_mcbsp_get_tx_delay); @@ -1683,8 +1694,16 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) { mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; if (cpu_is_omap34xx()) { - mcbsp->max_tx_thres = max_thres(mcbsp); - mcbsp->max_rx_thres = max_thres(mcbsp); + /* + * Initially configure the maximum thresholds to a safe value. + * The McBSP FIFO usage with these values should not go under + * 16 locations. + * If the whole FIFO without safety buffer is used, than there + * is a possibility that the DMA will be not able to push the + * new data on time, causing channel shifts in runtime. + */ + mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10; + mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10; /* * REVISIT: Set dmap_op_mode to THRESHOLD as default * for mcbsp2 instances. diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 06703635ace1..0d4aa0d5876c 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -54,7 +54,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index) { struct pin_config *reg; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + if (!cpu_class_is_omap1()) { printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n", index); WARN_ON(1); diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index 186bca82cfab..e129ce80c53b 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -34,11 +34,11 @@ struct omap_opp *l3_opps; * Device-driver-originated constraints (via board-*.c files) */ -void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) +int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) { if (!dev || t < -1) { - WARN_ON(1); - return; + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (t == -1) @@ -58,14 +58,16 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) * * TI CDP code can call constraint_set here. */ + + return 0; } -void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) +int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) { if (!dev || (agent_id != OCP_INITIATOR_AGENT && agent_id != OCP_TARGET_AGENT)) { - WARN_ON(1); - return; + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (r == 0) @@ -83,13 +85,16 @@ void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) * * TI CDP code can call constraint_set here on the VDD2 OPP. */ + + return 0; } -void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t) +int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, + long t) { - if (!dev || t < -1) { - WARN_ON(1); - return; + if (!req_dev || !dev || t < -1) { + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (t == -1) @@ -111,13 +116,15 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t) * * TI CDP code can call constraint_set here. */ + + return 0; } -void omap_pm_set_max_sdma_lat(struct device *dev, long t) +int omap_pm_set_max_sdma_lat(struct device *dev, long t) { if (!dev || t < -1) { - WARN_ON(1); - return; + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (t == -1) @@ -139,8 +146,36 @@ void omap_pm_set_max_sdma_lat(struct device *dev, long t) * TI CDP code can call constraint_set here. */ + return 0; } +int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r) +{ + if (!dev || !c || r < 0) { + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; + } + + if (r == 0) + pr_debug("OMAP PM: remove min clk rate constraint: " + "dev %s\n", dev_name(dev)); + else + pr_debug("OMAP PM: add min clk rate constraint: " + "dev %s, rate = %ld Hz\n", dev_name(dev), r); + + /* + * Code in a real implementation should keep track of these + * constraints on the clock, and determine the highest minimum + * clock rate. It should iterate over each OPP and determine + * whether the OPP will result in a clock rate that would + * satisfy this constraint (and any other PM constraint in effect + * at that time). Once it finds the lowest-voltage OPP that + * meets those conditions, it should switch to it, or return + * an error if the code is not capable of doing so. + */ + + return 0; +} /* * DSP Bridge-specific constraints diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index f899603051ac..d2b160942ccc 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -1,7 +1,7 @@ /* * omap_device implementation * - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Nokia Corporation * Paul Walmsley, Kevin Hilman * * Developed in collaboration with (alphabetical order): Benoit @@ -90,8 +90,11 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 - -#define OMAP_DEVICE_MAGIC 0xf00dcafe +/* + * OMAP_DEVICE_MAGIC: used to determine whether a struct omap_device + * obtained via container_of() is in fact a struct omap_device + */ +#define OMAP_DEVICE_MAGIC 0xf00dcafe /* Private functions */ @@ -359,7 +362,7 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_device *od; char *pdev_name2; struct resource *res = NULL; - int res_count; + int i, res_count; struct omap_hwmod **hwmods; if (!ohs || oh_cnt == 0 || !pdev_name) @@ -404,7 +407,9 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, od->pdev.num_resources = res_count; od->pdev.resource = res; - platform_device_add_data(&od->pdev, pdata, pdata_len); + ret = platform_device_add_data(&od->pdev, pdata, pdata_len); + if (ret) + goto odbs_exit4; od->pm_lats = pm_lats; od->pm_lats_cnt = pm_lats_cnt; @@ -416,6 +421,9 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, else ret = omap_device_register(od); + for (i = 0; i < oh_cnt; i++) + hwmods[i]->od = od; + if (ret) goto odbs_exit4; @@ -652,6 +660,25 @@ struct powerdomain *omap_device_get_pwrdm(struct omap_device *od) return omap_hwmod_get_pwrdm(od->hwmods[0]); } +/** + * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base + * @od: struct omap_device * + * + * Return the MPU's virtual address for the base of the hwmod, from + * the ioremap() that the hwmod code does. Only valid if there is one + * hwmod associated with this device. Returns NULL if there are zero + * or more than one hwmods associated with this omap_device; + * otherwise, passes along the return value from + * omap_hwmod_get_mpu_rt_va(). + */ +void __iomem *omap_device_get_rt_va(struct omap_device *od) +{ + if (od->hwmods_cnt != 1) + return NULL; + + return omap_hwmod_get_mpu_rt_va(od->hwmods[0]); +} + /* * Public functions intended for use in omap_device_pm_latency * .activate_func and .deactivate_func function pointers diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index d3bf17cd36f3..f3570884883e 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -22,524 +22,13 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/types.h> -#include <linux/errno.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/usb/otg.h> #include <linux/io.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <mach/hardware.h> - -#include <plat/control.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/board.h> -#ifdef CONFIG_ARCH_OMAP1 - -#define INT_USB_IRQ_GEN IH2_BASE + 20 -#define INT_USB_IRQ_NISO IH2_BASE + 30 -#define INT_USB_IRQ_ISO IH2_BASE + 29 -#define INT_USB_IRQ_HGEN INT_USB_HHC_1 -#define INT_USB_IRQ_OTG IH2_BASE + 8 - -#else - -#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN -#define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO -#define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO -#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN -#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG - -#endif - - -/* These routines should handle the standard chip-specific modes - * for usb0/1/2 ports, covering basic mux and transceiver setup. - * - * Some board-*.c files will need to set up additional mux options, - * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. - */ - -/* TESTED ON: - * - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables - * - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables - * - 5912 OSK UDC, with *nonstandard* A-to-A cable - * - 1510 Innovator UDC with bundled usb0 cable - * - 1510 Innovator OHCI with bundled usb1/usb2 cable - * - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS - * - 1710 custom development board using alternate pin group - * - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables - */ - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX) - -static void omap2_usb_devconf_clear(u8 port, u32 mask) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r &= ~USBTXWRMODEI(port, mask); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb_devconf_set(u8 port, u32 mask) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r |= USBTXWRMODEI(port, mask); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb2_disable_5pinbitll(void) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI); - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static void omap2_usb2_enable_5pinunitll(void) -{ - u32 r; - - r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI; - omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0); -} - -static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) -{ - u32 syscon1 = 0; - - if (cpu_is_omap24xx()) - omap2_usb_devconf_clear(0, USB_BIDIR_TLL); - - if (nwires == 0) { - if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { - u32 l; - - /* pulldown D+/D- */ - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~(3 << 1); - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - return 0; - } - - if (is_device) { - if (cpu_is_omap24xx()) - omap_cfg_reg(J20_24XX_USB0_PUEN); - else if (cpu_is_omap7xx()) { - omap_cfg_reg(AA17_7XX_USB_DM); - omap_cfg_reg(W16_7XX_USB_PU_EN); - omap_cfg_reg(W17_7XX_USB_VBUSI); - omap_cfg_reg(W18_7XX_USB_DMCK_OUT); - omap_cfg_reg(W19_7XX_USB_DCRST); - } else - omap_cfg_reg(W4_USB_PUEN); - } - - /* internal transceiver (unavailable on 17xx, 24xx) */ - if (!cpu_class_is_omap2() && nwires == 2) { - u32 l; - - // omap_cfg_reg(P9_USB_DP); - // omap_cfg_reg(R8_USB_DM); - - if (cpu_is_omap15xx()) { - /* This works on 1510-Innovator */ - return 0; - } - - /* NOTES: - * - peripheral should configure VBUS detection! - * - only peripherals may use the internal D+/D- pulldowns - * - OTG support on this port not yet written - */ - - /* Don't do this for omap7xx -- it causes USB to not work correctly */ - if (!cpu_is_omap7xx()) { - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~(7 << 4); - if (!is_device) - l |= (3 << 1); - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - - return 3 << 16; - } - - /* alternate pin config, external transceiver */ - if (cpu_is_omap15xx()) { - printk(KERN_ERR "no usb0 alt pin config on 15xx\n"); - return 0; - } - - if (cpu_is_omap24xx()) { - omap_cfg_reg(K18_24XX_USB0_DAT); - omap_cfg_reg(K19_24XX_USB0_TXEN); - omap_cfg_reg(J14_24XX_USB0_SE0); - if (nwires != 3) - omap_cfg_reg(J18_24XX_USB0_RCV); - } else { - omap_cfg_reg(V6_USB0_TXD); - omap_cfg_reg(W9_USB0_TXEN); - omap_cfg_reg(W5_USB0_SE0); - if (nwires != 3) - omap_cfg_reg(Y5_USB0_RCV); - } - - /* NOTE: SPEED and SUSP aren't configured here. OTG hosts - * may be able to use I2C requests to set those bits along - * with VBUS switching and overcurrent detection. - */ - - if (cpu_class_is_omap1() && nwires != 6) { - u32 l; - - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~CONF_USB2_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - - switch (nwires) { - case 3: - syscon1 = 2; - if (cpu_is_omap24xx()) - omap2_usb_devconf_set(0, USB_BIDIR); - break; - case 4: - syscon1 = 1; - if (cpu_is_omap24xx()) - omap2_usb_devconf_set(0, USB_BIDIR); - break; - case 6: - syscon1 = 3; - if (cpu_is_omap24xx()) { - omap_cfg_reg(J19_24XX_USB0_VP); - omap_cfg_reg(K20_24XX_USB0_VM); - omap2_usb_devconf_set(0, USB_UNIDIR); - } else { - u32 l; - - omap_cfg_reg(AA9_USB0_VP); - omap_cfg_reg(R9_USB0_VM); - l = omap_readl(USB_TRANSCEIVER_CTRL); - l |= CONF_USB2_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - break; - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 0, nwires); - } - return syscon1 << 16; -} - -static u32 __init omap_usb1_init(unsigned nwires) -{ - u32 syscon1 = 0; - - if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) { - u32 l; - - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~CONF_USB1_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - if (cpu_is_omap24xx()) - omap2_usb_devconf_clear(1, USB_BIDIR_TLL); - - if (nwires == 0) - return 0; - - /* external transceiver */ - if (cpu_class_is_omap1()) { - omap_cfg_reg(USB1_TXD); - omap_cfg_reg(USB1_TXEN); - if (nwires != 3) - omap_cfg_reg(USB1_RCV); - } - - if (cpu_is_omap15xx()) { - omap_cfg_reg(USB1_SEO); - omap_cfg_reg(USB1_SPEED); - // SUSP - } else if (cpu_is_omap1610() || cpu_is_omap5912()) { - omap_cfg_reg(W13_1610_USB1_SE0); - omap_cfg_reg(R13_1610_USB1_SPEED); - // SUSP - } else if (cpu_is_omap1710()) { - omap_cfg_reg(R13_1710_USB1_SE0); - // SUSP - } else if (cpu_is_omap24xx()) { - /* NOTE: board-specific code must set up pin muxing for usb1, - * since each signal could come out on either of two balls. - */ - } else { - pr_debug("usb%d cpu unrecognized\n", 1); - return 0; - } - - switch (nwires) { - case 2: - if (!cpu_is_omap24xx()) - goto bad; - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM - */ - syscon1 = 1; - omap2_usb_devconf_set(1, USB_BIDIR_TLL); - break; - case 3: - syscon1 = 2; - if (cpu_is_omap24xx()) - omap2_usb_devconf_set(1, USB_BIDIR); - break; - case 4: - syscon1 = 1; - if (cpu_is_omap24xx()) - omap2_usb_devconf_set(1, USB_BIDIR); - break; - case 6: - if (cpu_is_omap24xx()) - goto bad; - syscon1 = 3; - omap_cfg_reg(USB1_VP); - omap_cfg_reg(USB1_VM); - if (!cpu_is_omap15xx()) { - u32 l; - - l = omap_readl(USB_TRANSCEIVER_CTRL); - l |= CONF_USB1_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - break; - default: -bad: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 1, nwires); - } - return syscon1 << 20; -} - -static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - u32 syscon1 = 0; - - if (cpu_is_omap24xx()) { - omap2_usb2_disable_5pinbitll(); - alt_pingroup = 0; - } - - /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ - if (alt_pingroup || nwires == 0) - return 0; - - if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) { - u32 l; - - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~CONF_USB2_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - - /* external transceiver */ - if (cpu_is_omap15xx()) { - omap_cfg_reg(USB2_TXD); - omap_cfg_reg(USB2_TXEN); - omap_cfg_reg(USB2_SEO); - if (nwires != 3) - omap_cfg_reg(USB2_RCV); - /* there is no USB2_SPEED */ - } else if (cpu_is_omap16xx()) { - omap_cfg_reg(V6_USB2_TXD); - omap_cfg_reg(W9_USB2_TXEN); - omap_cfg_reg(W5_USB2_SE0); - if (nwires != 3) - omap_cfg_reg(Y5_USB2_RCV); - // FIXME omap_cfg_reg(USB2_SPEED); - } else if (cpu_is_omap24xx()) { - omap_cfg_reg(Y11_24XX_USB2_DAT); - omap_cfg_reg(AA10_24XX_USB2_SE0); - if (nwires > 2) - omap_cfg_reg(AA12_24XX_USB2_TXEN); - if (nwires > 3) - omap_cfg_reg(AA6_24XX_USB2_RCV); - } else { - pr_debug("usb%d cpu unrecognized\n", 1); - return 0; - } - // if (cpu_class_is_omap1()) omap_cfg_reg(USB2_SUSP); - - switch (nwires) { - case 2: - if (!cpu_is_omap24xx()) - goto bad; - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM - */ - syscon1 = 1; - omap2_usb_devconf_set(2, USB_BIDIR_TLL); - break; - case 3: - syscon1 = 2; - if (cpu_is_omap24xx()) - omap2_usb_devconf_set(2, USB_BIDIR); - break; - case 4: - syscon1 = 1; - if (cpu_is_omap24xx()) - omap2_usb_devconf_set(2, USB_BIDIR); - break; - case 5: - if (!cpu_is_omap24xx()) - goto bad; - omap_cfg_reg(AA4_24XX_USB2_TLLSE0); - /* NOTE: board-specific code must override this setting if - * this TLL link is not using DP/DM. Something must also - * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED} - */ - syscon1 = 3; - omap2_usb2_enable_5pinunitll(); - break; - case 6: - if (cpu_is_omap24xx()) - goto bad; - syscon1 = 3; - if (cpu_is_omap15xx()) { - omap_cfg_reg(USB2_VP); - omap_cfg_reg(USB2_VM); - } else { - u32 l; - - omap_cfg_reg(AA9_USB2_VP); - omap_cfg_reg(R9_USB2_VM); - l = omap_readl(USB_TRANSCEIVER_CTRL); - l |= CONF_USB2_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - break; - default: -bad: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 2, nwires); - } - return syscon1 << 24; -} - -#endif - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_USB_GADGET_OMAP - -static struct resource udc_resources[] = { - /* order is significant! */ - { /* registers */ - .start = UDC_BASE, - .end = UDC_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { /* general IRQ */ - .start = INT_USB_IRQ_GEN, - .flags = IORESOURCE_IRQ, - }, { /* PIO IRQ */ - .start = INT_USB_IRQ_NISO, - .flags = IORESOURCE_IRQ, - }, { /* SOF IRQ */ - .start = INT_USB_IRQ_ISO, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 udc_dmamask = ~(u32)0; - -static struct platform_device udc_device = { - .name = "omap_udc", - .id = -1, - .dev = { - .dma_mask = &udc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(udc_resources), - .resource = udc_resources, -}; - -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; - -static struct resource ohci_resources[] = { - { - .start = OMAP_OHCI_BASE, - .end = OMAP_OHCI_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_IRQ_HGEN, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci_device = { - .name = "ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -#endif - -#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) - -static struct resource otg_resources[] = { - /* order is significant! */ - { - .start = OTG_BASE, - .end = OTG_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = INT_USB_IRQ_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device otg_device = { - .name = "omap_otg", - .id = -1, - .num_resources = ARRAY_SIZE(otg_resources), - .resource = otg_resources, -}; - -#endif - -/*-------------------------------------------------------------------------*/ - -// FIXME correct answer depends on hmc_mode, -// as does (on omap1) any nonzero value for config->otg port number -#ifdef CONFIG_USB_GADGET_OMAP -#define is_usb0_device(config) 1 -#else -#define is_usb0_device(config) 0 -#endif - -/*-------------------------------------------------------------------------*/ - #ifdef CONFIG_ARCH_OMAP_OTG void __init @@ -560,9 +49,9 @@ omap_otg_init(struct omap_usb_config *config) /* pin muxing and transceiver pinouts */ if (config->pins[0] > 2) /* alt pingroup 2 */ alt_pingroup = 1; - syscon |= omap_usb0_init(config->pins[0], is_usb0_device(config)); - syscon |= omap_usb1_init(config->pins[1]); - syscon |= omap_usb2_init(config->pins[2], alt_pingroup); + syscon |= config->usb0_init(config->pins[0], is_usb0_device(config)); + syscon |= config->usb1_init(config->pins[1]); + syscon |= config->usb2_init(config->pins[2], alt_pingroup); pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); omap_writel(syscon, OTG_SYSCON_1); @@ -610,15 +99,11 @@ omap_otg_init(struct omap_usb_config *config) #ifdef CONFIG_USB_GADGET_OMAP if (config->otg || config->register_dev) { + struct platform_device *udc_device = config->udc_device; + syscon &= ~DEV_IDLE_EN; - udc_device.dev.platform_data = config; - /* IRQ numbers for omap7xx */ - if(cpu_is_omap7xx()) { - udc_resources[1].start = INT_7XX_USB_GENI; - udc_resources[2].start = INT_7XX_USB_NON_ISO; - udc_resources[3].start = INT_7XX_USB_ISO; - } - status = platform_device_register(&udc_device); + udc_device->dev.platform_data = config; + status = platform_device_register(udc_device); if (status) pr_debug("can't register UDC device, %d\n", status); } @@ -626,11 +111,11 @@ omap_otg_init(struct omap_usb_config *config) #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) if (config->otg || config->register_host) { + struct platform_device *ohci_device = config->ohci_device; + syscon &= ~HST_IDLE_EN; - ohci_device.dev.platform_data = config; - if (cpu_is_omap7xx()) - ohci_resources[1].start = INT_7XX_USB_HHC_1; - status = platform_device_register(&ohci_device); + ohci_device->dev.platform_data = config; + status = platform_device_register(ohci_device); if (status) pr_debug("can't register OHCI device, %d\n", status); } @@ -638,11 +123,11 @@ omap_otg_init(struct omap_usb_config *config) #ifdef CONFIG_USB_OTG if (config->otg) { + struct platform_device *otg_device = config->otg_device; + syscon &= ~OTG_IDLE_EN; - otg_device.dev.platform_data = config; - if (cpu_is_omap7xx()) - otg_resources[1].start = INT_7XX_USB_OTG; - status = platform_device_register(&otg_device); + otg_device->dev.platform_data = config; + status = platform_device_register(otg_device); if (status) pr_debug("can't register OTG device, %d\n", status); } @@ -654,102 +139,5 @@ omap_otg_init(struct omap_usb_config *config) } #else -static inline void omap_otg_init(struct omap_usb_config *config) {} -#endif - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_ARCH_OMAP15XX - -/* ULPD_DPLL_CTRL */ -#define DPLL_IOB (1 << 13) -#define DPLL_PLL_ENABLE (1 << 4) -#define DPLL_LOCK (1 << 0) - -/* ULPD_APLL_CTRL */ -#define APLL_NDPLL_SWITCH (1 << 0) - - -static void __init omap_1510_usb_init(struct omap_usb_config *config) -{ - unsigned int val; - u16 w; - - omap_usb0_init(config->pins[0], is_usb0_device(config)); - omap_usb1_init(config->pins[1]); - omap_usb2_init(config->pins[2], 0); - - val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1); - val |= (config->hmc_mode << 1); - omap_writel(val, MOD_CONF_CTRL_0); - - printk("USB: hmc %d", config->hmc_mode); - if (config->pins[0]) - printk(", usb0 %d wires%s", config->pins[0], - is_usb0_device(config) ? " (dev)" : ""); - if (config->pins[1]) - printk(", usb1 %d wires", config->pins[1]); - if (config->pins[2]) - printk(", usb2 %d wires", config->pins[2]); - printk("\n"); - - /* use DPLL for 48 MHz function clock */ - pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL), - omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ)); - - w = omap_readw(ULPD_APLL_CTRL); - w &= ~APLL_NDPLL_SWITCH; - omap_writew(w, ULPD_APLL_CTRL); - - w = omap_readw(ULPD_DPLL_CTRL); - w |= DPLL_IOB | DPLL_PLL_ENABLE; - omap_writew(w, ULPD_DPLL_CTRL); - - w = omap_readw(ULPD_SOFT_REQ); - w |= SOFT_UDC_REQ | SOFT_DPLL_REQ; - omap_writew(w, ULPD_SOFT_REQ); - - while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) - cpu_relax(); - -#ifdef CONFIG_USB_GADGET_OMAP - if (config->register_dev) { - int status; - - udc_device.dev.platform_data = config; - status = platform_device_register(&udc_device); - if (status) - pr_debug("can't register UDC device, %d\n", status); - /* udc driver gates 48MHz by D+ pullup */ - } -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - if (config->register_host) { - int status; - - ohci_device.dev.platform_data = config; - status = platform_device_register(&ohci_device); - if (status) - pr_debug("can't register OHCI device, %d\n", status); - /* hcd explicitly gates 48MHz */ - } -#endif -} - -#else -static inline void omap_1510_usb_init(struct omap_usb_config *config) {} +void omap_otg_init(struct omap_usb_config *config) {} #endif - -/*-------------------------------------------------------------------------*/ - -void __init omap_usb_init(struct omap_usb_config *pdata) -{ - if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) - omap_otg_init(pdata); - else if (cpu_is_omap15xx()) - omap_1510_usb_init(pdata); - else - printk(KERN_ERR "USB: No init for your chip yet\n"); -} - diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h new file mode 100644 index 000000000000..9cf1f781329b --- /dev/null +++ b/arch/arm/plat-orion/include/plat/audio.h @@ -0,0 +1,11 @@ +#ifndef __PLAT_AUDIO_H +#define __PLAT_AUDIO_H + +#include <linux/mbus.h> + +struct kirkwood_asoc_platform_data { + u32 tclk; + struct mbus_dram_target_info *dram; + int burst; +}; +#endif diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index f2b319333184..f51572772e21 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -45,9 +45,6 @@ config GENERIC_IRQ_PROBE config RWSEM_GENERIC_SPINLOCK def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_CLOCKEVENTS def_bool y diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index ead8a75203a9..22fb66590dcd 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -13,7 +13,7 @@ KBUILD_DEFCONFIG := atstk1002_defconfig KBUILD_CFLAGS += -pipe -fno-builtin -mno-pic KBUILD_AFLAGS += -mrelax -mno-pic -CFLAGS_MODULE += -mno-relax +KBUILD_CFLAGS_MODULE += -mno-relax LDFLAGS_vmlinux += --relax cpuflags-$(CONFIG_PLATFORM_AT32AP) += -march=ap diff --git a/arch/avr32/include/asm/local64.h b/arch/avr32/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/avr32/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f66294b4f9d2..c88fd3584122 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -614,9 +614,6 @@ comment "Kernel Timer/Scheduler" source kernel/Kconfig.hz -config GENERIC_TIME - def_bool y - config GENERIC_CLOCKEVENTS bool "Generic clock events" default y diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 5a97a31d4bbd..9d5ffaf5492a 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -18,8 +18,8 @@ ifeq ($(CONFIG_ROMKERNEL),y) KBUILD_CFLAGS += -mlong-calls endif KBUILD_AFLAGS += $(call cc-option,-mno-fdpic) -CFLAGS_MODULE += -mlong-calls -LDFLAGS_MODULE += -m elf32bfin +KBUILD_CFLAGS_MODULE += -mlong-calls +KBUILD_LDFLAGS_MODULE += -m elf32bfin KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig diff --git a/arch/blackfin/include/asm/local64.h b/arch/blackfin/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/blackfin/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index e25bf4440b51..887ef855be2a 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -20,9 +20,6 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool -config GENERIC_TIME - def_bool y - config GENERIC_CMOS_UPDATE def_bool y diff --git a/arch/cris/include/asm/local64.h b/arch/cris/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/cris/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 4b5830bcbe2e..16399bd24993 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -40,10 +40,6 @@ config GENERIC_HARDIRQS_NO__DO_IRQ bool default y -config GENERIC_TIME - bool - default y - config TIME_LOW_RES bool default y diff --git a/arch/frv/Makefile b/arch/frv/Makefile index 310c47a663f8..7ff84575b186 100644 --- a/arch/frv/Makefile +++ b/arch/frv/Makefile @@ -23,20 +23,14 @@ # Copyright (C) 1994 by Hamish Macdonald # -CCSPECS := $(shell $(CC) -v 2>&1 | grep "^Reading specs from " | head -1 | cut -c20-) -CCDIR := $(strip $(patsubst %/specs,%,$(CCSPECS))) -CPUCLASS := fr400 - -# test for cross compiling -COMPILE_ARCH = $(shell uname -m) - ifdef CONFIG_MMU UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\" else UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\" endif -ARCHMODFLAGS += -G0 -mlong-calls +KBUILD_AFLAGS_MODULE += -G0 -mlong-calls +KBUILD_CFLAGS_MODULE += -G0 -mlong-calls ifdef CONFIG_GPREL_DATA_8 KBUILD_CFLAGS += -G8 @@ -54,7 +48,6 @@ endif ifdef CONFIG_GC_SECTIONS KBUILD_CFLAGS += -ffunction-sections -fdata-sections -LINKFLAGS += --gc-sections endif ifndef CONFIG_FRAME_POINTER @@ -64,16 +57,13 @@ endif ifdef CONFIG_CPU_FR451_COMPILE KBUILD_CFLAGS += -mcpu=fr450 KBUILD_AFLAGS += -mcpu=fr450 -ASFLAGS += -mcpu=fr450 else ifdef CONFIG_CPU_FR551_COMPILE KBUILD_CFLAGS += -mcpu=fr550 KBUILD_AFLAGS += -mcpu=fr550 -ASFLAGS += -mcpu=fr550 else KBUILD_CFLAGS += -mcpu=fr400 KBUILD_AFLAGS += -mcpu=fr400 -ASFLAGS += -mcpu=fr400 endif endif @@ -83,14 +73,12 @@ endif KBUILD_CFLAGS += -mno-fdpic -mgpr-32 -msoft-float -mno-media KBUILD_CFLAGS += -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 KBUILD_AFLAGS += -mno-fdpic -ASFLAGS += -mno-fdpic # make sure the .S files get compiled with debug info # and disable optimisations that are unhelpful whilst debugging ifdef CONFIG_DEBUG_INFO #KBUILD_CFLAGS += -O1 KBUILD_AFLAGS += -Wa,--gdwarf2 -ASFLAGS += -Wa,--gdwarf2 endif head-y := arch/frv/kernel/head.o arch/frv/kernel/init_task.o @@ -105,11 +93,5 @@ all: Image Image: vmlinux $(Q)$(MAKE) $(build)=arch/frv/boot $@ -bootstrap: - $(Q)$(MAKEBOOT) bootstrap - archclean: $(Q)$(MAKE) $(clean)=arch/frv/boot - -archdep: scripts/mkdep symlinks - $(Q)$(MAKE) $(build)=arch/frv/boot dep diff --git a/arch/frv/include/asm/local64.h b/arch/frv/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/frv/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/frv/kernel/local64.h b/arch/frv/kernel/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/frv/kernel/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index 53cc669e6d59..988b6ff34cc4 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -62,10 +62,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_TIME - bool - default y - config GENERIC_BUG bool depends on BUG diff --git a/arch/h8300/include/asm/local64.h b/arch/h8300/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/h8300/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 95610820041e..8711d13cd79f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -82,10 +82,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_TIME - bool - default y - config GENERIC_TIME_VSYSCALL bool default y diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index 8ae0d2604ce1..be7bfa12b705 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -22,13 +22,13 @@ CHECKFLAGS += -m64 -D__ia64=1 -D__ia64__=1 -D_LP64 -D__LP64__ OBJCOPYFLAGS := --strip-all LDFLAGS_vmlinux := -static -LDFLAGS_MODULE += -T $(srctree)/arch/ia64/module.lds -AFLAGS_KERNEL := -mconstant-gp +KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/ia64/module.lds +KBUILD_AFLAGS_KERNEL := -mconstant-gp EXTRA := cflags-y := -pipe $(EXTRA) -ffixed-r13 -mfixed-range=f12-f15,f32-f127 \ -falign-functions=32 -frename-registers -fno-optimize-sibling-calls -CFLAGS_KERNEL := -mconstant-gp +KBUILD_CFLAGS_KERNEL := -mconstant-gp GAS_STATUS = $(shell $(srctree)/arch/ia64/scripts/check-gas "$(CC)" "$(OBJDUMP)") KBUILD_CPPFLAGS += $(shell $(srctree)/arch/ia64/scripts/toolchain-flags "$(CC)" "$(OBJDUMP)" "$(READELF)") diff --git a/arch/ia64/include/asm/local64.h b/arch/ia64/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/ia64/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c index 6c8922856049..4a746ea838ff 100644 --- a/arch/ia64/kernel/msi_ia64.c +++ b/arch/ia64/kernel/msi_ia64.c @@ -25,7 +25,7 @@ static int ia64_set_msi_irq_affinity(unsigned int irq, if (irq_prepare_move(irq, cpu)) return -1; - read_msi_msg(irq, &msg); + get_cached_msi_msg(irq, &msg); addr = msg.address_lo; addr &= MSI_ADDR_DEST_ID_MASK; diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 6a1380e90f87..99dcc85193c9 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -519,7 +519,7 @@ do_boot_cpu (int sapicid, int cpu) /* * We can't use kernel_thread since we must avoid to reschedule the child. */ - if (!keventd_up() || current_is_keventd()) + if (!keventd_up()) c_idle.work.func(&c_idle.work); else { schedule_work(&c_idle.work); diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 653b3c46ea82..ed6f22eb5b12 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -471,7 +471,8 @@ void update_vsyscall_tz(void) { } -void update_vsyscall(struct timespec *wall, struct clocksource *c, u32 mult) +void update_vsyscall(struct timespec *wall, struct timespec *wtm, + struct clocksource *c, u32 mult) { unsigned long flags; @@ -487,9 +488,9 @@ void update_vsyscall(struct timespec *wall, struct clocksource *c, u32 mult) /* copy kernel time structures */ fsyscall_gtod_data.wall_time.tv_sec = wall->tv_sec; fsyscall_gtod_data.wall_time.tv_nsec = wall->tv_nsec; - fsyscall_gtod_data.monotonic_time.tv_sec = wall_to_monotonic.tv_sec + fsyscall_gtod_data.monotonic_time.tv_sec = wtm->tv_sec + wall->tv_sec; - fsyscall_gtod_data.monotonic_time.tv_nsec = wall_to_monotonic.tv_nsec + fsyscall_gtod_data.monotonic_time.tv_nsec = wtm->tv_nsec + wall->tv_nsec; /* normalize */ diff --git a/arch/ia64/sn/kernel/msi_sn.c b/arch/ia64/sn/kernel/msi_sn.c index ebfdd6a9ae1a..0c72dd463831 100644 --- a/arch/ia64/sn/kernel/msi_sn.c +++ b/arch/ia64/sn/kernel/msi_sn.c @@ -175,7 +175,7 @@ static int sn_set_msi_irq_affinity(unsigned int irq, * Release XIO resources for the old MSI PCI address */ - read_msi_msg(irq, &msg); + get_cached_msi_msg(irq, &msg); sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; pdev = sn_pdev->pdi_linux_pcidev; provider = SN_PCIDEV_BUSPROVIDER(pdev); diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 3a9319f93e89..836abbbc9c04 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -44,9 +44,6 @@ config HZ int default 100 -config GENERIC_TIME - def_bool y - config ARCH_USES_GETTIMEOFFSET def_bool y diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile index 469766b24e22..8ff5ba0ea26c 100644 --- a/arch/m32r/Makefile +++ b/arch/m32r/Makefile @@ -12,8 +12,8 @@ OBJCOPYFLAGS := -O binary -R .note -R .comment -S LDFLAGS_vmlinux := KBUILD_CFLAGS += -pipe -fno-schedule-insns -CFLAGS_KERNEL += -mmodel=medium -CFLAGS_MODULE += -mmodel=large +KBUILD_CFLAGS_KERNEL += -mmodel=medium +KBUILD_CFLAGS_MODULE += -mmodel=large ifdef CONFIG_CHIP_VDEC2 cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst diff --git a/arch/m32r/include/asm/local64.h b/arch/m32r/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/m32r/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 2e3737b92ffc..8030e2481d97 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -59,9 +59,6 @@ config HZ int default 100 -config GENERIC_TIME - def_bool y - config ARCH_USES_GETTIMEOFFSET def_bool y diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile index 570d85c3f97f..b06a7e3cbcd6 100644 --- a/arch/m68k/Makefile +++ b/arch/m68k/Makefile @@ -18,7 +18,7 @@ KBUILD_DEFCONFIG := multi_defconfig # override top level makefile AS += -m68020 LDFLAGS := -m m68kelf -LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds +KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds ifneq ($(SUBARCH),$(ARCH)) ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := $(call cc-cross-prefix, \ diff --git a/arch/m68k/include/asm/local64.h b/arch/m68k/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/m68k/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index efeb6033fc17..2609c394e1df 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -63,10 +63,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_TIME - bool - default y - config GENERIC_CMOS_UPDATE bool default y diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index be3855250db6..692fdfce2a23 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -18,6 +18,8 @@ config MICROBLAZE select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG select TRACING_SUPPORT + select OF + select OF_FLATTREE config SWAP def_bool n @@ -49,9 +51,6 @@ config GENERIC_IRQ_PROBE config GENERIC_CALIBRATE_DELAY def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_TIME_VSYSCALL def_bool n @@ -76,9 +75,6 @@ config LOCKDEP_SUPPORT config HAVE_LATENCYTOP_SUPPORT def_bool y -config DTC - def_bool y - source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -125,18 +121,6 @@ config CMDLINE_FORCE Set this to have arguments from the default kernel command string override those passed by the boot loader. -config OF - def_bool y - select OF_FLATTREE - -config PROC_DEVICETREE - bool "Support for device tree in /proc" - depends on PROC_FS - help - This option adds a device-tree directory under /proc which contains - an image of the device tree that the kernel copies from Open - Firmware or other boot firmware. If unsure, say Y here. - endmenu menu "Advanced setup" diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h index 31a35c33df63..ec5583d6111c 100644 --- a/arch/microblaze/include/asm/irq.h +++ b/arch/microblaze/include/asm/irq.h @@ -27,17 +27,6 @@ extern unsigned int nr_irq; struct pt_regs; extern void do_IRQ(struct pt_regs *regs); -/** - * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space - * @device: Device node of the device whose interrupt is to be mapped - * @index: Index of the interrupt to map - * - * This function is a wrapper that chains of_irq_map_one() and - * irq_create_of_mapping() to make things easier to callers - */ -struct device_node; -extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index); - /** FIXME - not implement * irq_dispose_mapping - Unmap an interrupt * @virq: linux virq number of the interrupt to unmap @@ -62,17 +51,4 @@ struct irq_host; extern unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq); -/** - * irq_create_of_mapping - Map a hardware interrupt into linux virq space - * @controller: Device node of the interrupt controller - * @inspec: Interrupt specifier from the device-tree - * @intsize: Size of the interrupt specifier from the device-tree - * - * This function is identical to irq_create_mapping except that it takes - * as input informations straight from the device-tree (typically the results - * of the of_irq_map_*() functions. - */ -extern unsigned int irq_create_of_mapping(struct device_node *controller, - u32 *intspec, unsigned int intsize); - #endif /* _ASM_MICROBLAZE_IRQ_H */ diff --git a/arch/microblaze/include/asm/local64.h b/arch/microblaze/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/microblaze/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/microblaze/include/asm/of_device.h b/arch/microblaze/include/asm/of_device.h deleted file mode 100644 index 73cb98040982..000000000000 --- a/arch/microblaze/include/asm/of_device.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu> - * - * based on PowerPC of_device.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _ASM_MICROBLAZE_OF_DEVICE_H -#define _ASM_MICROBLAZE_OF_DEVICE_H -#ifdef __KERNEL__ - -#include <linux/device.h> -#include <linux/of.h> - -/* - * The of_device is a kind of "base class" that is a superset of - * struct device for use by devices attached to an OF node and - * probed using OF properties. - */ -struct of_device { - struct device dev; /* Generic device interface */ - struct pdev_archdata archdata; -}; - -extern ssize_t of_device_get_modalias(struct of_device *ofdev, - char *str, ssize_t len); - -extern struct of_device *of_device_alloc(struct device_node *np, - const char *bus_id, - struct device *parent); - -extern int of_device_uevent(struct device *dev, - struct kobj_uevent_env *env); - -extern void of_device_make_bus_id(struct of_device *dev); - -/* This is just here during the transition */ -#include <linux/of_device.h> - -#endif /* __KERNEL__ */ -#endif /* _ASM_MICROBLAZE_OF_DEVICE_H */ diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h deleted file mode 100644 index 37491276c6ca..000000000000 --- a/arch/microblaze/include/asm/of_platform.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. - * <benh@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MICROBLAZE_OF_PLATFORM_H -#define _ASM_MICROBLAZE_OF_PLATFORM_H - -/* This is just here during the transition */ -#include <linux/of_platform.h> - -/* - * The list of OF IDs below is used for matching bus types in the - * system whose devices are to be exposed as of_platform_devices. - * - * This is the default list valid for most platforms. This file provides - * functions who can take an explicit list if necessary though - * - * The search is always performed recursively looking for children of - * the provided device_node and recursively if such a children matches - * a bus type in the list - */ - -static const struct of_device_id of_default_bus_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .type = "plb5", }, - { .type = "plb4", }, - { .type = "opb", }, - { .type = "simple", }, - {}, -}; - -/* Platform devices and busses creation */ -extern struct of_device *of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent); -/* pseudo "matches" value to not do deep probe */ -#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1) - -extern int of_platform_bus_probe(struct device_node *root, - const struct of_device_id *matches, - struct device *parent); - -extern struct of_device *of_find_device_by_phandle(phandle ph); - -extern void of_instantiate_rtc(void); - -#endif /* _ASM_MICROBLAZE_OF_PLATFORM_H */ diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index c12c6dfafd9f..4f268faa0126 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -47,13 +47,6 @@ #define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1))) #define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1))) -/* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP(addr, size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN(addr, size) ((addr)&(~((size)-1))) - -/* align addr on a size boundary - adjust address up if needed */ -#define _ALIGN(addr, size) _ALIGN_UP(addr, size) - #ifndef CONFIG_MMU /* * PAGE_OFFSET -- the first address of the first page of memory. When not diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index 0c77cda9f5d8..0c68764ab547 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -172,13 +172,8 @@ static inline int pci_has_flag(int flag) extern struct list_head hose_list; -extern unsigned long pci_address_to_pio(phys_addr_t address); extern int pcibios_vaddr_is_ioport(void __iomem *address); #else -static inline unsigned long pci_address_to_pio(phys_addr_t address) -{ - return (unsigned long)-1; -} static inline int pcibios_vaddr_is_ioport(void __iomem *address) { return 0; diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index e7d67a329bd7..101fa098f62a 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -20,9 +20,6 @@ #ifndef __ASSEMBLY__ #include <linux/types.h> -#include <linux/of_fdt.h> -#include <linux/proc_fs.h> -#include <linux/platform_device.h> #include <asm/irq.h> #include <asm/atomic.h> @@ -50,29 +47,10 @@ extern void pci_create_OF_bus_map(void); * OF address retreival & translation */ -/* Translate an OF address block into a CPU physical address - */ -extern u64 of_translate_address(struct device_node *np, const u32 *addr); - -/* Extract an address from a device, returns the region size and - * the address space flags too. The PCI version uses a BAR number - * instead of an absolute index - */ -extern const u32 *of_get_address(struct device_node *dev, int index, - u64 *size, unsigned int *flags); -extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, - u64 *size, unsigned int *flags); - -/* Get an address as a resource. Note that if your address is - * a PIO address, the conversion will fail if the physical address - * can't be internally converted to an IO token with - * pci_address_to_pio(), that is because it's either called to early - * or it can't be matched to any host bridge IO space - */ -extern int of_address_to_resource(struct device_node *dev, int index, - struct resource *r); -extern int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r); +#ifdef CONFIG_PCI +extern unsigned long pci_address_to_pio(phys_addr_t address); +#define pci_address_to_pio pci_address_to_pio +#endif /* CONFIG_PCI */ /* Parse the ibm,dma-window property of an OF node into the busno, phys and * size parameters. @@ -88,69 +66,6 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); /* Get the MAC address */ extern const void *of_get_mac_address(struct device_node *np); -/* - * OF interrupt mapping - */ - -/* This structure is returned when an interrupt is mapped. The controller - * field needs to be put() after use - */ - -#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */ - -struct of_irq { - struct device_node *controller; /* Interrupt controller node */ - u32 size; /* Specifier size */ - u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */ -}; - -/** - * of_irq_map_init - Initialize the irq remapper - * @flags: flags defining workarounds to enable - * - * Some machines have bugs in the device-tree which require certain workarounds - * to be applied. Call this before any interrupt mapping attempts to enable - * those workarounds. - */ -#define OF_IMAP_OLDWORLD_MAC 0x00000001 -#define OF_IMAP_NO_PHANDLE 0x00000002 - -extern void of_irq_map_init(unsigned int flags); - -/** - * of_irq_map_raw - Low level interrupt tree parsing - * @parent: the device interrupt parent - * @intspec: interrupt specifier ("interrupts" property of the device) - * @ointsize: size of the passed in interrupt specifier - * @addr: address specifier (start of "reg" property of the device) - * @out_irq: structure of_irq filled by this function - * - * Returns 0 on success and a negative number on error - * - * This function is a low-level interrupt tree walking function. It - * can be used to do a partial walk with synthetized reg and interrupts - * properties, for example when resolving PCI interrupts when no device - * node exist for the parent. - * - */ - -extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, - u32 ointsize, const u32 *addr, - struct of_irq *out_irq); - -/** - * of_irq_map_one - Resolve an interrupt for a device - * @device: the device whose interrupt is to be resolved - * @index: index of the interrupt to resolve - * @out_irq: structure of_irq filled by this function - * - * This function resolves an interrupt, walking the tree, for a given - * device-tree node. It's the high level pendant to of_irq_map_raw(). - * It also implements the workarounds for OldWolrd Macs. - */ -extern int of_irq_map_one(struct device_node *device, int index, - struct of_irq *out_irq); - /** * of_irq_map_pci - Resolve the interrupt for a PCI device * @pdev: the device whose interrupt is to be resolved @@ -163,20 +78,18 @@ extern int of_irq_map_one(struct device_node *device, int index, * resolving using the OF tree walking. */ struct pci_dev; +struct of_irq; extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); -extern int of_irq_to_resource(struct device_node *dev, int index, - struct resource *r); - -/** - * of_iomap - Maps the memory mapped IO for a given device_node - * @device: the device whose io range will be mapped - * @index: index of the io range - * - * Returns a pointer to the mapped memory - */ -extern void __iomem *of_iomap(struct device_node *device, int index); - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ + +/* These includes are put at the bottom because they may contain things + * that are overridden by this file. Ideally they shouldn't be included + * by this file, but there are a bunch of .c files that currently depend + * on it. Eventually they will be cleaned up. */ +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> + #endif /* _ASM_MICROBLAZE_PROM_H */ diff --git a/arch/microblaze/include/asm/topology.h b/arch/microblaze/include/asm/topology.h index 96bcea5a9920..5428f333a02c 100644 --- a/arch/microblaze/include/asm/topology.h +++ b/arch/microblaze/include/asm/topology.h @@ -1,11 +1 @@ #include <asm-generic/topology.h> - -#ifndef _ASM_MICROBLAZE_TOPOLOGY_H -#define _ASM_MICROBLAZE_TOPOLOGY_H - -struct device_node; -static inline int of_node_to_nid(struct device_node *device) -{ - return 0; -} -#endif /* _ASM_MICROBLAZE_TOPOLOGY_H */ diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index 5eecc9f1fbd9..f0cb5c26c81c 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -15,8 +15,8 @@ endif extra-y := head.o vmlinux.lds obj-y += dma.o exceptions.o \ - hw_exception_handler.o init_task.o intc.o irq.o of_device.o \ - of_platform.o process.o prom.o prom_parse.o ptrace.o \ + hw_exception_handler.o init_task.o intc.o irq.o \ + process.o prom.o prom_parse.o ptrace.o \ reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o obj-y += cpu/ diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index 598f1fd61c89..a9345fb4906a 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -17,20 +17,10 @@ #include <linux/seq_file.h> #include <linux/kernel_stat.h> #include <linux/irq.h> +#include <linux/of_irq.h> #include <asm/prom.h> -unsigned int irq_of_parse_and_map(struct device_node *dev, int index) -{ - struct of_irq oirq; - - if (of_irq_map_one(dev, index, &oirq)) - return NO_IRQ; - - return oirq.specifier[0]; -} -EXPORT_SYMBOL_GPL(irq_of_parse_and_map); - static u32 concurrent_irq; void __irq_entry do_IRQ(struct pt_regs *regs) @@ -106,7 +96,7 @@ unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq) EXPORT_SYMBOL_GPL(irq_create_mapping); unsigned int irq_create_of_mapping(struct device_node *controller, - u32 *intspec, unsigned int intsize) + const u32 *intspec, unsigned int intsize) { return intspec[0]; } diff --git a/arch/microblaze/kernel/of_device.c b/arch/microblaze/kernel/of_device.c deleted file mode 100644 index b372787886ed..000000000000 --- a/arch/microblaze/kernel/of_device.c +++ /dev/null @@ -1,112 +0,0 @@ -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mod_devicetable.h> -#include <linux/slab.h> -#include <linux/of_device.h> - -#include <linux/errno.h> - -void of_device_make_bus_id(struct of_device *dev) -{ - static atomic_t bus_no_reg_magic; - struct device_node *node = dev->dev.of_node; - const u32 *reg; - u64 addr; - int magic; - - /* - * For MMIO, get the physical address - */ - reg = of_get_property(node, "reg", NULL); - if (reg) { - addr = of_translate_address(node, reg); - if (addr != OF_BAD_ADDR) { - dev_set_name(&dev->dev, "%llx.%s", - (unsigned long long)addr, node->name); - return; - } - } - - /* - * No BusID, use the node name and add a globally incremented - * counter (and pray...) - */ - magic = atomic_add_return(1, &bus_no_reg_magic); - dev_set_name(&dev->dev, "%s.%d", node->name, magic - 1); -} -EXPORT_SYMBOL(of_device_make_bus_id); - -struct of_device *of_device_alloc(struct device_node *np, - const char *bus_id, - struct device *parent) -{ - struct of_device *dev; - - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) - return NULL; - - dev->dev.of_node = of_node_get(np); - dev->dev.dma_mask = &dev->archdata.dma_mask; - dev->dev.parent = parent; - dev->dev.release = of_release_dev; - - if (bus_id) - dev_set_name(&dev->dev, bus_id); - else - of_device_make_bus_id(dev); - - return dev; -} -EXPORT_SYMBOL(of_device_alloc); - -int of_device_uevent(struct device *dev, struct kobj_uevent_env *env) -{ - struct of_device *ofdev; - const char *compat; - int seen = 0, cplen, sl; - - if (!dev) - return -ENODEV; - - ofdev = to_of_device(dev); - - if (add_uevent_var(env, "OF_NAME=%s", ofdev->dev.of_node->name)) - return -ENOMEM; - - if (add_uevent_var(env, "OF_TYPE=%s", ofdev->dev.of_node->type)) - return -ENOMEM; - - /* Since the compatible field can contain pretty much anything - * it's not really legal to split it out with commas. We split it - * up using a number of environment variables instead. */ - - compat = of_get_property(ofdev->dev.of_node, "compatible", &cplen); - while (compat && *compat && cplen > 0) { - if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat)) - return -ENOMEM; - - sl = strlen(compat) + 1; - compat += sl; - cplen -= sl; - seen++; - } - - if (add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen)) - return -ENOMEM; - - /* modalias is trickier, we add it in 2 steps */ - if (add_uevent_var(env, "MODALIAS=")) - return -ENOMEM; - sl = of_device_get_modalias(ofdev, &env->buf[env->buflen-1], - sizeof(env->buf) - env->buflen); - if (sl >= (sizeof(env->buf) - env->buflen)) - return -ENOMEM; - env->buflen += sl; - - return 0; -} -EXPORT_SYMBOL(of_device_uevent); diff --git a/arch/microblaze/kernel/of_platform.c b/arch/microblaze/kernel/of_platform.c deleted file mode 100644 index ccf6f4257f4b..000000000000 --- a/arch/microblaze/kernel/of_platform.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. - * <benh@kernel.crashing.org> - * and Arnd Bergmann, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#undef DEBUG - -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mod_devicetable.h> -#include <linux/pci.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> - -#include <linux/errno.h> -#include <linux/topology.h> -#include <asm/atomic.h> - -struct bus_type of_platform_bus_type = { - .uevent = of_device_uevent, -}; -EXPORT_SYMBOL(of_platform_bus_type); - -static int __init of_bus_driver_init(void) -{ - return of_bus_type_init(&of_platform_bus_type, "of_platform"); -} -postcore_initcall(of_bus_driver_init); - -struct of_device *of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent) -{ - struct of_device *dev; - - dev = of_device_alloc(np, bus_id, parent); - if (!dev) - return NULL; - - dev->archdata.dma_mask = 0xffffffffUL; - dev->dev.bus = &of_platform_bus_type; - - /* We do not fill the DMA ops for platform devices by default. - * This is currently the responsibility of the platform code - * to do such, possibly using a device notifier - */ - - if (of_device_register(dev) != 0) { - of_device_free(dev); - return NULL; - } - - return dev; -} -EXPORT_SYMBOL(of_platform_device_create); - -/** - * of_platform_bus_create - Create an OF device for a bus node and all its - * children. Optionally recursively instanciate matching busses. - * @bus: device node of the bus to instanciate - * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to - * disallow recursive creation of child busses - */ -static int of_platform_bus_create(const struct device_node *bus, - const struct of_device_id *matches, - struct device *parent) -{ - struct device_node *child; - struct of_device *dev; - int rc = 0; - - for_each_child_of_node(bus, child) { - pr_debug(" create child: %s\n", child->full_name); - dev = of_platform_device_create(child, NULL, parent); - if (dev == NULL) - rc = -ENOMEM; - else if (!of_match_node(matches, child)) - continue; - if (rc == 0) { - pr_debug(" and sub busses\n"); - rc = of_platform_bus_create(child, matches, &dev->dev); - } - if (rc) { - of_node_put(child); - break; - } - } - return rc; -} - - -/** - * of_platform_bus_probe - Probe the device-tree for platform busses - * @root: parent of the first level to probe or NULL for the root of the tree - * @matches: match table, NULL to use the default - * @parent: parent to hook devices from, NULL for toplevel - * - * Note that children of the provided root are not instanciated as devices - * unless the specified root itself matches the bus list and is not NULL. - */ - -int of_platform_bus_probe(struct device_node *root, - const struct of_device_id *matches, - struct device *parent) -{ - struct device_node *child; - struct of_device *dev; - int rc = 0; - - if (matches == NULL) - matches = of_default_bus_ids; - if (matches == OF_NO_DEEP_PROBE) - return -EINVAL; - if (root == NULL) - root = of_find_node_by_path("/"); - else - of_node_get(root); - - pr_debug("of_platform_bus_probe()\n"); - pr_debug(" starting at: %s\n", root->full_name); - - /* Do a self check of bus type, if there's a match, create - * children - */ - if (of_match_node(matches, root)) { - pr_debug(" root match, create all sub devices\n"); - dev = of_platform_device_create(root, NULL, parent); - if (dev == NULL) { - rc = -ENOMEM; - goto bail; - } - pr_debug(" create all sub busses\n"); - rc = of_platform_bus_create(root, matches, &dev->dev); - goto bail; - } - for_each_child_of_node(root, child) { - if (!of_match_node(matches, child)) - continue; - - pr_debug(" match: %s\n", child->full_name); - dev = of_platform_device_create(child, NULL, parent); - if (dev == NULL) - rc = -ENOMEM; - else - rc = of_platform_bus_create(child, matches, &dev->dev); - if (rc) { - of_node_put(child); - break; - } - } - bail: - of_node_put(root); - return rc; -} -EXPORT_SYMBOL(of_platform_bus_probe); - -static int of_dev_node_match(struct device *dev, void *data) -{ - return to_of_device(dev)->dev.of_node == data; -} - -struct of_device *of_find_device_by_node(struct device_node *np) -{ - struct device *dev; - - dev = bus_find_device(&of_platform_bus_type, - NULL, np, of_dev_node_match); - if (dev) - return to_of_device(dev); - return NULL; -} -EXPORT_SYMBOL(of_find_device_by_node); - -static int of_dev_phandle_match(struct device *dev, void *data) -{ - phandle *ph = data; - return to_of_device(dev)->dev.of_node->phandle == *ph; -} - -struct of_device *of_find_device_by_phandle(phandle ph) -{ - struct device *dev; - - dev = bus_find_device(&of_platform_bus_type, - NULL, &ph, of_dev_phandle_match); - if (dev) - return to_of_device(dev); - return NULL; -} -EXPORT_SYMBOL(of_find_device_by_phandle); diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c index bf7e6c27e318..d33ba17601fa 100644 --- a/arch/microblaze/kernel/prom_parse.c +++ b/arch/microblaze/kernel/prom_parse.c @@ -6,219 +6,11 @@ #include <linux/module.h> #include <linux/ioport.h> #include <linux/etherdevice.h> +#include <linux/of_address.h> #include <asm/prom.h> #include <asm/pci-bridge.h> -#define PRu64 "%llx" - -/* Max address size we deal with */ -#define OF_MAX_ADDR_CELLS 4 -#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ - (ns) > 0) - -static struct of_bus *of_match_bus(struct device_node *np); -static int __of_address_to_resource(struct device_node *dev, - const u32 *addrp, u64 size, unsigned int flags, - struct resource *r); - -/* Debug utility */ -#ifdef DEBUG -static void of_dump_addr(const char *s, const u32 *addr, int na) -{ - printk(KERN_INFO "%s", s); - while (na--) - printk(KERN_INFO " %08x", *(addr++)); - printk(KERN_INFO "\n"); -} -#else -static void of_dump_addr(const char *s, const u32 *addr, int na) { } -#endif - -/* Callbacks for bus specific translators */ -struct of_bus { - const char *name; - const char *addresses; - int (*match)(struct device_node *parent); - void (*count_cells)(struct device_node *child, - int *addrc, int *sizec); - u64 (*map)(u32 *addr, const u32 *range, - int na, int ns, int pna); - int (*translate)(u32 *addr, u64 offset, int na); - unsigned int (*get_flags)(const u32 *addr); -}; - -/* - * Default translator (generic bus) - */ - -static void of_bus_default_count_cells(struct device_node *dev, - int *addrc, int *sizec) -{ - if (addrc) - *addrc = of_n_addr_cells(dev); - if (sizec) - *sizec = of_n_size_cells(dev); -} - -static u64 of_bus_default_map(u32 *addr, const u32 *range, - int na, int ns, int pna) -{ - u64 cp, s, da; - - cp = of_read_number(range, na); - s = of_read_number(range + na + pna, ns); - da = of_read_number(addr, na); - - pr_debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n", - cp, s, da); - - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; -} - -static int of_bus_default_translate(u32 *addr, u64 offset, int na) -{ - u64 a = of_read_number(addr, na); - memset(addr, 0, na * 4); - a += offset; - if (na > 1) - addr[na - 2] = a >> 32; - addr[na - 1] = a & 0xffffffffu; - - return 0; -} - -static unsigned int of_bus_default_get_flags(const u32 *addr) -{ - return IORESOURCE_MEM; -} - #ifdef CONFIG_PCI -/* - * PCI bus specific translator - */ - -static int of_bus_pci_match(struct device_node *np) -{ - /* "vci" is for the /chaos bridge on 1st-gen PCI powermacs */ - return !strcmp(np->type, "pci") || !strcmp(np->type, "vci"); -} - -static void of_bus_pci_count_cells(struct device_node *np, - int *addrc, int *sizec) -{ - if (addrc) - *addrc = 3; - if (sizec) - *sizec = 2; -} - -static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna) -{ - u64 cp, s, da; - - /* Check address type match */ - if ((addr[0] ^ range[0]) & 0x03000000) - return OF_BAD_ADDR; - - /* Read address values, skipping high cell */ - cp = of_read_number(range + 1, na - 1); - s = of_read_number(range + na + pna, ns); - da = of_read_number(addr + 1, na - 1); - - pr_debug("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); - - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; -} - -static int of_bus_pci_translate(u32 *addr, u64 offset, int na) -{ - return of_bus_default_translate(addr + 1, offset, na - 1); -} - -static unsigned int of_bus_pci_get_flags(const u32 *addr) -{ - unsigned int flags = 0; - u32 w = addr[0]; - - switch ((w >> 24) & 0x03) { - case 0x01: - flags |= IORESOURCE_IO; - break; - case 0x02: /* 32 bits */ - case 0x03: /* 64 bits */ - flags |= IORESOURCE_MEM; - break; - } - if (w & 0x40000000) - flags |= IORESOURCE_PREFETCH; - return flags; -} - -const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, - unsigned int *flags) -{ - const u32 *prop; - unsigned int psize; - struct device_node *parent; - struct of_bus *bus; - int onesize, i, na, ns; - - /* Get parent & match bus type */ - parent = of_get_parent(dev); - if (parent == NULL) - return NULL; - bus = of_match_bus(parent); - if (strcmp(bus->name, "pci")) { - of_node_put(parent); - return NULL; - } - bus->count_cells(dev, &na, &ns); - of_node_put(parent); - if (!OF_CHECK_COUNTS(na, ns)) - return NULL; - - /* Get "reg" or "assigned-addresses" property */ - prop = of_get_property(dev, bus->addresses, &psize); - if (prop == NULL) - return NULL; - psize /= 4; - - onesize = na + ns; - for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) - if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { - if (size) - *size = of_read_number(prop + na, ns); - if (flags) - *flags = bus->get_flags(prop); - return prop; - } - return NULL; -} -EXPORT_SYMBOL(of_get_pci_address); - -int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r) -{ - const u32 *addrp; - u64 size; - unsigned int flags; - - addrp = of_get_pci_address(dev, bar, &size, &flags); - if (addrp == NULL) - return -EINVAL; - return __of_address_to_resource(dev, addrp, size, flags, r); -} -EXPORT_SYMBOL_GPL(of_pci_address_to_resource); - -static u8 of_irq_pci_swizzle(u8 slot, u8 pin) -{ - return (((pin - 1) + slot) % 4) + 1; -} - int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) { struct device_node *dn, *ppnode; @@ -293,331 +85,6 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) EXPORT_SYMBOL_GPL(of_irq_map_pci); #endif /* CONFIG_PCI */ -/* - * ISA bus specific translator - */ - -static int of_bus_isa_match(struct device_node *np) -{ - return !strcmp(np->name, "isa"); -} - -static void of_bus_isa_count_cells(struct device_node *child, - int *addrc, int *sizec) -{ - if (addrc) - *addrc = 2; - if (sizec) - *sizec = 1; -} - -static u64 of_bus_isa_map(u32 *addr, const u32 *range, int na, int ns, int pna) -{ - u64 cp, s, da; - - /* Check address type match */ - if ((addr[0] ^ range[0]) & 0x00000001) - return OF_BAD_ADDR; - - /* Read address values, skipping high cell */ - cp = of_read_number(range + 1, na - 1); - s = of_read_number(range + na + pna, ns); - da = of_read_number(addr + 1, na - 1); - - pr_debug("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); - - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; -} - -static int of_bus_isa_translate(u32 *addr, u64 offset, int na) -{ - return of_bus_default_translate(addr + 1, offset, na - 1); -} - -static unsigned int of_bus_isa_get_flags(const u32 *addr) -{ - unsigned int flags = 0; - u32 w = addr[0]; - - if (w & 1) - flags |= IORESOURCE_IO; - else - flags |= IORESOURCE_MEM; - return flags; -} - -/* - * Array of bus specific translators - */ - -static struct of_bus of_busses[] = { -#ifdef CONFIG_PCI - /* PCI */ - { - .name = "pci", - .addresses = "assigned-addresses", - .match = of_bus_pci_match, - .count_cells = of_bus_pci_count_cells, - .map = of_bus_pci_map, - .translate = of_bus_pci_translate, - .get_flags = of_bus_pci_get_flags, - }, -#endif /* CONFIG_PCI */ - /* ISA */ - { - .name = "isa", - .addresses = "reg", - .match = of_bus_isa_match, - .count_cells = of_bus_isa_count_cells, - .map = of_bus_isa_map, - .translate = of_bus_isa_translate, - .get_flags = of_bus_isa_get_flags, - }, - /* Default */ - { - .name = "default", - .addresses = "reg", - .match = NULL, - .count_cells = of_bus_default_count_cells, - .map = of_bus_default_map, - .translate = of_bus_default_translate, - .get_flags = of_bus_default_get_flags, - }, -}; - -static struct of_bus *of_match_bus(struct device_node *np) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(of_busses); i++) - if (!of_busses[i].match || of_busses[i].match(np)) - return &of_busses[i]; - BUG(); - return NULL; -} - -static int of_translate_one(struct device_node *parent, struct of_bus *bus, - struct of_bus *pbus, u32 *addr, - int na, int ns, int pna) -{ - const u32 *ranges; - unsigned int rlen; - int rone; - u64 offset = OF_BAD_ADDR; - - /* Normally, an absence of a "ranges" property means we are - * crossing a non-translatable boundary, and thus the addresses - * below the current not cannot be converted to CPU physical ones. - * Unfortunately, while this is very clear in the spec, it's not - * what Apple understood, and they do have things like /uni-n or - * /ht nodes with no "ranges" property and a lot of perfectly - * useable mapped devices below them. Thus we treat the absence of - * "ranges" as equivalent to an empty "ranges" property which means - * a 1:1 translation at that level. It's up to the caller not to try - * to translate addresses that aren't supposed to be translated in - * the first place. --BenH. - */ - ranges = of_get_property(parent, "ranges", (int *) &rlen); - if (ranges == NULL || rlen == 0) { - offset = of_read_number(addr, na); - memset(addr, 0, pna * 4); - pr_debug("OF: no ranges, 1:1 translation\n"); - goto finish; - } - - pr_debug("OF: walking ranges...\n"); - - /* Now walk through the ranges */ - rlen /= 4; - rone = na + pna + ns; - for (; rlen >= rone; rlen -= rone, ranges += rone) { - offset = bus->map(addr, ranges, na, ns, pna); - if (offset != OF_BAD_ADDR) - break; - } - if (offset == OF_BAD_ADDR) { - pr_debug("OF: not found !\n"); - return 1; - } - memcpy(addr, ranges + na, 4 * pna); - - finish: - of_dump_addr("OF: parent translation for:", addr, pna); - pr_debug("OF: with offset: "PRu64"\n", offset); - - /* Translate it into parent bus space */ - return pbus->translate(addr, offset, pna); -} - -/* - * Translate an address from the device-tree into a CPU physical address, - * this walks up the tree and applies the various bus mappings on the - * way. - * - * Note: We consider that crossing any level with #size-cells == 0 to mean - * that translation is impossible (that is we are not dealing with a value - * that can be mapped to a cpu physical address). This is not really specified - * that way, but this is traditionally the way IBM at least do things - */ -u64 of_translate_address(struct device_node *dev, const u32 *in_addr) -{ - struct device_node *parent = NULL; - struct of_bus *bus, *pbus; - u32 addr[OF_MAX_ADDR_CELLS]; - int na, ns, pna, pns; - u64 result = OF_BAD_ADDR; - - pr_debug("OF: ** translation for device %s **\n", dev->full_name); - - /* Increase refcount at current level */ - of_node_get(dev); - - /* Get parent & match bus type */ - parent = of_get_parent(dev); - if (parent == NULL) - goto bail; - bus = of_match_bus(parent); - - /* Cound address cells & copy address locally */ - bus->count_cells(dev, &na, &ns); - if (!OF_CHECK_COUNTS(na, ns)) { - printk(KERN_ERR "prom_parse: Bad cell count for %s\n", - dev->full_name); - goto bail; - } - memcpy(addr, in_addr, na * 4); - - pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n", - bus->name, na, ns, parent->full_name); - of_dump_addr("OF: translating address:", addr, na); - - /* Translate */ - for (;;) { - /* Switch to parent bus */ - of_node_put(dev); - dev = parent; - parent = of_get_parent(dev); - - /* If root, we have finished */ - if (parent == NULL) { - pr_debug("OF: reached root node\n"); - result = of_read_number(addr, na); - break; - } - - /* Get new parent bus and counts */ - pbus = of_match_bus(parent); - pbus->count_cells(dev, &pna, &pns); - if (!OF_CHECK_COUNTS(pna, pns)) { - printk(KERN_ERR "prom_parse: Bad cell count for %s\n", - dev->full_name); - break; - } - - pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n", - pbus->name, pna, pns, parent->full_name); - - /* Apply bus translation */ - if (of_translate_one(dev, bus, pbus, addr, na, ns, pna)) - break; - - /* Complete the move up one level */ - na = pna; - ns = pns; - bus = pbus; - - of_dump_addr("OF: one level translation:", addr, na); - } - bail: - of_node_put(parent); - of_node_put(dev); - - return result; -} -EXPORT_SYMBOL(of_translate_address); - -const u32 *of_get_address(struct device_node *dev, int index, u64 *size, - unsigned int *flags) -{ - const u32 *prop; - unsigned int psize; - struct device_node *parent; - struct of_bus *bus; - int onesize, i, na, ns; - - /* Get parent & match bus type */ - parent = of_get_parent(dev); - if (parent == NULL) - return NULL; - bus = of_match_bus(parent); - bus->count_cells(dev, &na, &ns); - of_node_put(parent); - if (!OF_CHECK_COUNTS(na, ns)) - return NULL; - - /* Get "reg" or "assigned-addresses" property */ - prop = of_get_property(dev, bus->addresses, (int *) &psize); - if (prop == NULL) - return NULL; - psize /= 4; - - onesize = na + ns; - for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) - if (i == index) { - if (size) - *size = of_read_number(prop + na, ns); - if (flags) - *flags = bus->get_flags(prop); - return prop; - } - return NULL; -} -EXPORT_SYMBOL(of_get_address); - -static int __of_address_to_resource(struct device_node *dev, const u32 *addrp, - u64 size, unsigned int flags, - struct resource *r) -{ - u64 taddr; - - if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0) - return -EINVAL; - taddr = of_translate_address(dev, addrp); - if (taddr == OF_BAD_ADDR) - return -EINVAL; - memset(r, 0, sizeof(struct resource)); - if (flags & IORESOURCE_IO) { - unsigned long port; - port = -1; /* pci_address_to_pio(taddr); */ - if (port == (unsigned long)-1) - return -EINVAL; - r->start = port; - r->end = port + size - 1; - } else { - r->start = taddr; - r->end = taddr + size - 1; - } - r->flags = flags; - r->name = dev->name; - return 0; -} - -int of_address_to_resource(struct device_node *dev, int index, - struct resource *r) -{ - const u32 *addrp; - u64 size; - unsigned int flags; - - addrp = of_get_address(dev, index, &size, &flags); - if (addrp == NULL) - return -EINVAL; - return __of_address_to_resource(dev, addrp, size, flags, r); -} -EXPORT_SYMBOL_GPL(of_address_to_resource); - void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) { @@ -644,308 +111,6 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, *size = of_read_number(dma_window, cells); } -/* - * Interrupt remapper - */ - -static unsigned int of_irq_workarounds; -static struct device_node *of_irq_dflt_pic; - -static struct device_node *of_irq_find_parent(struct device_node *child) -{ - struct device_node *p; - const phandle *parp; - - if (!of_node_get(child)) - return NULL; - - do { - parp = of_get_property(child, "interrupt-parent", NULL); - if (parp == NULL) - p = of_get_parent(child); - else { - if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) - p = of_node_get(of_irq_dflt_pic); - else - p = of_find_node_by_phandle(*parp); - } - of_node_put(child); - child = p; - } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL); - - return p; -} - -/* This doesn't need to be called if you don't have any special workaround - * flags to pass - */ -void of_irq_map_init(unsigned int flags) -{ - of_irq_workarounds = flags; - - /* OldWorld, don't bother looking at other things */ - if (flags & OF_IMAP_OLDWORLD_MAC) - return; - - /* If we don't have phandles, let's try to locate a default interrupt - * controller (happens when booting with BootX). We do a first match - * here, hopefully, that only ever happens on machines with one - * controller. - */ - if (flags & OF_IMAP_NO_PHANDLE) { - struct device_node *np; - - for (np = NULL; (np = of_find_all_nodes(np)) != NULL;) { - if (of_get_property(np, "interrupt-controller", NULL) - == NULL) - continue; - /* Skip /chosen/interrupt-controller */ - if (strcmp(np->name, "chosen") == 0) - continue; - /* It seems like at least one person on this planet - * wants to use BootX on a machine with an AppleKiwi - * controller which happens to pretend to be an - * interrupt controller too. - */ - if (strcmp(np->name, "AppleKiwi") == 0) - continue; - /* I think we found one ! */ - of_irq_dflt_pic = np; - break; - } - } - -} - -int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize, - const u32 *addr, struct of_irq *out_irq) -{ - struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; - const u32 *tmp, *imap, *imask; - u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; - int imaplen, match, i; - - pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...]," - "ointsize=%d\n", - parent->full_name, intspec[0], intspec[1], ointsize); - - ipar = of_node_get(parent); - - /* First get the #interrupt-cells property of the current cursor - * that tells us how to interpret the passed-in intspec. If there - * is none, we are nice and just walk up the tree - */ - do { - tmp = of_get_property(ipar, "#interrupt-cells", NULL); - if (tmp != NULL) { - intsize = *tmp; - break; - } - tnode = ipar; - ipar = of_irq_find_parent(ipar); - of_node_put(tnode); - } while (ipar); - if (ipar == NULL) { - pr_debug(" -> no parent found !\n"); - goto fail; - } - - pr_debug("of_irq_map_raw: ipar=%s, size=%d\n", - ipar->full_name, intsize); - - if (ointsize != intsize) - return -EINVAL; - - /* Look for this #address-cells. We have to implement the old linux - * trick of looking for the parent here as some device-trees rely on it - */ - old = of_node_get(ipar); - do { - tmp = of_get_property(old, "#address-cells", NULL); - tnode = of_get_parent(old); - of_node_put(old); - old = tnode; - } while (old && tmp == NULL); - of_node_put(old); - old = NULL; - addrsize = (tmp == NULL) ? 2 : *tmp; - - pr_debug(" -> addrsize=%d\n", addrsize); - - /* Now start the actual "proper" walk of the interrupt tree */ - while (ipar != NULL) { - /* Now check if cursor is an interrupt-controller and if it is - * then we are done - */ - if (of_get_property(ipar, "interrupt-controller", NULL) != - NULL) { - pr_debug(" -> got it !\n"); - memcpy(out_irq->specifier, intspec, - intsize * sizeof(u32)); - out_irq->size = intsize; - out_irq->controller = ipar; - of_node_put(old); - return 0; - } - - /* Now look for an interrupt-map */ - imap = of_get_property(ipar, "interrupt-map", &imaplen); - /* No interrupt map, check for an interrupt parent */ - if (imap == NULL) { - pr_debug(" -> no map, getting parent\n"); - newpar = of_irq_find_parent(ipar); - goto skiplevel; - } - imaplen /= sizeof(u32); - - /* Look for a mask */ - imask = of_get_property(ipar, "interrupt-map-mask", NULL); - - /* If we were passed no "reg" property and we attempt to parse - * an interrupt-map, then #address-cells must be 0. - * Fail if it's not. - */ - if (addr == NULL && addrsize != 0) { - pr_debug(" -> no reg passed in when needed !\n"); - goto fail; - } - - /* Parse interrupt-map */ - match = 0; - while (imaplen > (addrsize + intsize + 1) && !match) { - /* Compare specifiers */ - match = 1; - for (i = 0; i < addrsize && match; ++i) { - u32 mask = imask ? imask[i] : 0xffffffffu; - match = ((addr[i] ^ imap[i]) & mask) == 0; - } - for (; i < (addrsize + intsize) && match; ++i) { - u32 mask = imask ? imask[i] : 0xffffffffu; - match = - ((intspec[i-addrsize] ^ imap[i]) - & mask) == 0; - } - imap += addrsize + intsize; - imaplen -= addrsize + intsize; - - pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen); - - /* Get the interrupt parent */ - if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) - newpar = of_node_get(of_irq_dflt_pic); - else - newpar = - of_find_node_by_phandle((phandle)*imap); - imap++; - --imaplen; - - /* Check if not found */ - if (newpar == NULL) { - pr_debug(" -> imap parent not found !\n"); - goto fail; - } - - /* Get #interrupt-cells and #address-cells of new - * parent - */ - tmp = of_get_property(newpar, "#interrupt-cells", NULL); - if (tmp == NULL) { - pr_debug(" -> parent lacks " - "#interrupt-cells!\n"); - goto fail; - } - newintsize = *tmp; - tmp = of_get_property(newpar, "#address-cells", NULL); - newaddrsize = (tmp == NULL) ? 0 : *tmp; - - pr_debug(" -> newintsize=%d, newaddrsize=%d\n", - newintsize, newaddrsize); - - /* Check for malformed properties */ - if (imaplen < (newaddrsize + newintsize)) - goto fail; - - imap += newaddrsize + newintsize; - imaplen -= newaddrsize + newintsize; - - pr_debug(" -> imaplen=%d\n", imaplen); - } - if (!match) - goto fail; - - of_node_put(old); - old = of_node_get(newpar); - addrsize = newaddrsize; - intsize = newintsize; - intspec = imap - intsize; - addr = intspec - addrsize; - -skiplevel: - /* Iterate again with new parent */ - pr_debug(" -> new parent: %s\n", - newpar ? newpar->full_name : "<>"); - of_node_put(ipar); - ipar = newpar; - newpar = NULL; - } -fail: - of_node_put(ipar); - of_node_put(old); - of_node_put(newpar); - - return -EINVAL; -} -EXPORT_SYMBOL_GPL(of_irq_map_raw); - -int of_irq_map_one(struct device_node *device, - int index, struct of_irq *out_irq) -{ - struct device_node *p; - const u32 *intspec, *tmp, *addr; - u32 intsize, intlen; - int res; - - pr_debug("of_irq_map_one: dev=%s, index=%d\n", - device->full_name, index); - - /* Get the interrupts property */ - intspec = of_get_property(device, "interrupts", (int *) &intlen); - if (intspec == NULL) - return -EINVAL; - intlen /= sizeof(u32); - - pr_debug(" intspec=%d intlen=%d\n", *intspec, intlen); - - /* Get the reg property (if any) */ - addr = of_get_property(device, "reg", NULL); - - /* Look for the interrupt parent. */ - p = of_irq_find_parent(device); - if (p == NULL) - return -EINVAL; - - /* Get size of interrupt specifier */ - tmp = of_get_property(p, "#interrupt-cells", NULL); - if (tmp == NULL) { - of_node_put(p); - return -EINVAL; - } - intsize = *tmp; - - pr_debug(" intsize=%d intlen=%d\n", intsize, intlen); - - /* Check index */ - if ((index + 1) * intsize > intlen) - return -EINVAL; - - /* Get new specifier and map it */ - res = of_irq_map_raw(p, intspec + index * intsize, intsize, - addr, out_irq); - of_node_put(p); - return res; -} -EXPORT_SYMBOL_GPL(of_irq_map_one); - /** * Search the device tree for the best MAC address to use. 'mac-address' is * checked first, because that is supposed to contain to "most recent" MAC @@ -983,43 +148,3 @@ const void *of_get_mac_address(struct device_node *np) return NULL; } EXPORT_SYMBOL(of_get_mac_address); - -int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) -{ - struct of_irq out_irq; - int irq; - int res; - - res = of_irq_map_one(dev, index, &out_irq); - - /* Get irq for the device */ - if (res) { - pr_debug("IRQ not found... code = %d", res); - return NO_IRQ; - } - /* Assuming single interrupt controller... */ - irq = out_irq.specifier[0]; - - pr_debug("IRQ found = %d", irq); - - /* Only dereference the resource if both the - * resource and the irq are valid. */ - if (r && irq != NO_IRQ) { - r->start = r->end = irq; - r->flags = IORESOURCE_IRQ; - } - - return irq; -} -EXPORT_SYMBOL_GPL(of_irq_to_resource); - -void __iomem *of_iomap(struct device_node *np, int index) -{ - struct resource res; - - if (of_address_to_resource(np, index, &res)) - return NULL; - - return ioremap(res.start, 1 + res.end - res.start); -} -EXPORT_SYMBOL(of_iomap); diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c index a1721a33042e..bd8ccab5ceff 100644 --- a/arch/microblaze/kernel/reset.c +++ b/arch/microblaze/kernel/reset.c @@ -24,8 +24,8 @@ static int of_reset_gpio_handle(void) int ret; /* variable which stored handle reset gpio pin */ struct device_node *root; /* root node */ struct device_node *gpio; /* gpio node */ - struct of_gpio_chip *of_gc = NULL; - enum of_gpio_flags flags ; + struct gpio_chip *gc; + u32 flags; const void *gpio_spec; /* find out root node */ @@ -39,19 +39,19 @@ static int of_reset_gpio_handle(void) goto err0; } - of_gc = gpio->data; - if (!of_gc) { + gc = of_node_to_gpiochip(gpio); + if (!gc) { pr_debug("%s: gpio controller %s isn't registered\n", root->full_name, gpio->full_name); ret = -ENODEV; goto err1; } - ret = of_gc->xlate(of_gc, root, gpio_spec, &flags); + ret = gc->of_xlate(gc, root, gpio_spec, &flags); if (ret < 0) goto err1; - ret += of_gc->gc.base; + ret += gc->base; err1: of_node_put(gpio); err0: diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 17c98dbcec88..f5f768842354 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -213,15 +213,9 @@ static struct notifier_block dflt_plat_bus_notifier = { .priority = INT_MAX, }; -static struct notifier_block dflt_of_bus_notifier = { - .notifier_call = dflt_bus_notify, - .priority = INT_MAX, -}; - static int __init setup_bus_notifier(void) { bus_register_notifier(&platform_bus_type, &dflt_plat_bus_notifier); - bus_register_notifier(&of_platform_bus_type, &dflt_of_bus_notifier); return 0; } diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 36642df7d5f6..3ad59dde4852 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -758,10 +758,6 @@ config GENERIC_CLOCKEVENTS bool default y -config GENERIC_TIME - bool - default y - config GENERIC_CMOS_UPDATE bool default y diff --git a/arch/mips/Makefile b/arch/mips/Makefile index f0d196090e94..f4a4b663ebb3 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -93,7 +93,8 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz cflags-y += -G 0 -mno-abicalls -fno-pic -pipe cflags-y += -msoft-float LDFLAGS_vmlinux += -G 0 -static -n -nostdlib -MODFLAGS += -mlong-calls +KBUILD_AFLAGS_MODULE += -mlong-calls +KBUILD_CFLAGS_MODULE += -mlong-calls cflags-y += -ffreestanding @@ -165,7 +166,8 @@ cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) ifdef CONFIG_CPU_SB1 ifdef CONFIG_SB1_PASS_1_WORKAROUNDS -MODFLAGS += -msb1-pass1-workarounds +KBUILD_AFLAGS_MODULE += -msb1-pass1-workarounds +KBUILD_CFLAGS_MODULE += -msb1-pass1-workarounds endif endif diff --git a/arch/mips/include/asm/kgdb.h b/arch/mips/include/asm/kgdb.h index 19002d605ac4..e6c0b0e14ccb 100644 --- a/arch/mips/include/asm/kgdb.h +++ b/arch/mips/include/asm/kgdb.h @@ -8,28 +8,27 @@ #if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \ (_MIPS_ISA == _MIPS_ISA_MIPS32) -#define KGDB_GDB_REG_SIZE 32 +#define KGDB_GDB_REG_SIZE 32 +#define GDB_SIZEOF_REG sizeof(u32) #elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \ (_MIPS_ISA == _MIPS_ISA_MIPS64) #ifdef CONFIG_32BIT -#define KGDB_GDB_REG_SIZE 32 +#define KGDB_GDB_REG_SIZE 32 +#define GDB_SIZEOF_REG sizeof(u32) #else /* CONFIG_CPU_32BIT */ -#define KGDB_GDB_REG_SIZE 64 +#define KGDB_GDB_REG_SIZE 64 +#define GDB_SIZEOF_REG sizeof(u64) #endif #else #error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA" #endif /* _MIPS_ISA */ #define BUFMAX 2048 -#if (KGDB_GDB_REG_SIZE == 32) -#define NUMREGBYTES (90*sizeof(u32)) -#define NUMCRITREGBYTES (12*sizeof(u32)) -#else -#define NUMREGBYTES (90*sizeof(u64)) -#define NUMCRITREGBYTES (12*sizeof(u64)) -#endif +#define DBG_MAX_REG_NUM 72 +#define NUMREGBYTES (DBG_MAX_REG_NUM * sizeof(GDB_SIZEOF_REG)) +#define NUMCRITREGBYTES (12 * sizeof(GDB_SIZEOF_REG)) #define BREAK_INSTR_SIZE 4 #define CACHE_FLUSH_IS_SAFE 0 diff --git a/arch/mips/include/asm/local64.h b/arch/mips/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/mips/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 9b78ff6e9b84..1f4e2fa64140 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -50,6 +50,151 @@ static struct hard_trap_info { { 0, 0} /* Must be last */ }; +struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = +{ + { "zero", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[0]) }, + { "at", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[1]) }, + { "v0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[2]) }, + { "v1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[3]) }, + { "a0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[4]) }, + { "a1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[5]) }, + { "a2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[6]) }, + { "a3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[7]) }, + { "t0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[8]) }, + { "t1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[9]) }, + { "t2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[10]) }, + { "t3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[11]) }, + { "t4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[12]) }, + { "t5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[13]) }, + { "t6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[14]) }, + { "t7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[15]) }, + { "s0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[16]) }, + { "s1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[17]) }, + { "s2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[18]) }, + { "s3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[19]) }, + { "s4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[20]) }, + { "s5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[21]) }, + { "s6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[22]) }, + { "s7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[23]) }, + { "t8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[24]) }, + { "t9", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[25]) }, + { "k0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[26]) }, + { "k1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[27]) }, + { "gp", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[28]) }, + { "sp", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[29]) }, + { "s8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[30]) }, + { "ra", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[31]) }, + { "sr", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_status) }, + { "lo", GDB_SIZEOF_REG, offsetof(struct pt_regs, lo) }, + { "hi", GDB_SIZEOF_REG, offsetof(struct pt_regs, hi) }, + { "bad", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_badvaddr) }, + { "cause", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_cause) }, + { "pc", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_epc) }, + { "f0", GDB_SIZEOF_REG, 0 }, + { "f1", GDB_SIZEOF_REG, 1 }, + { "f2", GDB_SIZEOF_REG, 2 }, + { "f3", GDB_SIZEOF_REG, 3 }, + { "f4", GDB_SIZEOF_REG, 4 }, + { "f5", GDB_SIZEOF_REG, 5 }, + { "f6", GDB_SIZEOF_REG, 6 }, + { "f7", GDB_SIZEOF_REG, 7 }, + { "f8", GDB_SIZEOF_REG, 8 }, + { "f9", GDB_SIZEOF_REG, 9 }, + { "f10", GDB_SIZEOF_REG, 10 }, + { "f11", GDB_SIZEOF_REG, 11 }, + { "f12", GDB_SIZEOF_REG, 12 }, + { "f13", GDB_SIZEOF_REG, 13 }, + { "f14", GDB_SIZEOF_REG, 14 }, + { "f15", GDB_SIZEOF_REG, 15 }, + { "f16", GDB_SIZEOF_REG, 16 }, + { "f17", GDB_SIZEOF_REG, 17 }, + { "f18", GDB_SIZEOF_REG, 18 }, + { "f19", GDB_SIZEOF_REG, 19 }, + { "f20", GDB_SIZEOF_REG, 20 }, + { "f21", GDB_SIZEOF_REG, 21 }, + { "f22", GDB_SIZEOF_REG, 22 }, + { "f23", GDB_SIZEOF_REG, 23 }, + { "f24", GDB_SIZEOF_REG, 24 }, + { "f25", GDB_SIZEOF_REG, 25 }, + { "f26", GDB_SIZEOF_REG, 26 }, + { "f27", GDB_SIZEOF_REG, 27 }, + { "f28", GDB_SIZEOF_REG, 28 }, + { "f29", GDB_SIZEOF_REG, 29 }, + { "f30", GDB_SIZEOF_REG, 30 }, + { "f31", GDB_SIZEOF_REG, 31 }, + { "fsr", GDB_SIZEOF_REG, 0 }, + { "fir", GDB_SIZEOF_REG, 0 }, +}; + +int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) +{ + int fp_reg; + + if (regno < 0 || regno >= DBG_MAX_REG_NUM) + return -EINVAL; + + if (dbg_reg_def[regno].offset != -1 && regno < 38) { + memcpy((void *)regs + dbg_reg_def[regno].offset, mem, + dbg_reg_def[regno].size); + } else if (current && dbg_reg_def[regno].offset != -1 && regno < 72) { + /* FP registers 38 -> 69 */ + if (!(regs->cp0_status & ST0_CU1)) + return 0; + if (regno == 70) { + /* Process the fcr31/fsr (register 70) */ + memcpy((void *)¤t->thread.fpu.fcr31, mem, + dbg_reg_def[regno].size); + goto out_save; + } else if (regno == 71) { + /* Ignore the fir (register 71) */ + goto out_save; + } + fp_reg = dbg_reg_def[regno].offset; + memcpy((void *)¤t->thread.fpu.fpr[fp_reg], mem, + dbg_reg_def[regno].size); +out_save: + restore_fp(current); + } + + return 0; +} + +char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs) +{ + int fp_reg; + + if (regno >= DBG_MAX_REG_NUM || regno < 0) + return NULL; + + if (dbg_reg_def[regno].offset != -1 && regno < 38) { + /* First 38 registers */ + memcpy(mem, (void *)regs + dbg_reg_def[regno].offset, + dbg_reg_def[regno].size); + } else if (current && dbg_reg_def[regno].offset != -1 && regno < 72) { + /* FP registers 38 -> 69 */ + if (!(regs->cp0_status & ST0_CU1)) + goto out; + save_fp(current); + if (regno == 70) { + /* Process the fcr31/fsr (register 70) */ + memcpy(mem, (void *)¤t->thread.fpu.fcr31, + dbg_reg_def[regno].size); + goto out; + } else if (regno == 71) { + /* Ignore the fir (register 71) */ + memset(mem, 0, dbg_reg_def[regno].size); + goto out; + } + fp_reg = dbg_reg_def[regno].offset; + memcpy(mem, (void *)¤t->thread.fpu.fpr[fp_reg], + dbg_reg_def[regno].size); + } + +out: + return dbg_reg_def[regno].name; + +} + void arch_kgdb_breakpoint(void) { __asm__ __volatile__( @@ -84,64 +229,6 @@ static int compute_signal(int tt) return SIGHUP; /* default for things we don't know about */ } -void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) -{ - int reg; - -#if (KGDB_GDB_REG_SIZE == 32) - u32 *ptr = (u32 *)gdb_regs; -#else - u64 *ptr = (u64 *)gdb_regs; -#endif - - for (reg = 0; reg < 32; reg++) - *(ptr++) = regs->regs[reg]; - - *(ptr++) = regs->cp0_status; - *(ptr++) = regs->lo; - *(ptr++) = regs->hi; - *(ptr++) = regs->cp0_badvaddr; - *(ptr++) = regs->cp0_cause; - *(ptr++) = regs->cp0_epc; - - /* FP REGS */ - if (!(current && (regs->cp0_status & ST0_CU1))) - return; - - save_fp(current); - for (reg = 0; reg < 32; reg++) - *(ptr++) = current->thread.fpu.fpr[reg]; -} - -void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) -{ - int reg; - -#if (KGDB_GDB_REG_SIZE == 32) - const u32 *ptr = (u32 *)gdb_regs; -#else - const u64 *ptr = (u64 *)gdb_regs; -#endif - - for (reg = 0; reg < 32; reg++) - regs->regs[reg] = *(ptr++); - - regs->cp0_status = *(ptr++); - regs->lo = *(ptr++); - regs->hi = *(ptr++); - regs->cp0_badvaddr = *(ptr++); - regs->cp0_cause = *(ptr++); - regs->cp0_epc = *(ptr++); - - /* FP REGS from current */ - if (!(current && (regs->cp0_status & ST0_CU1))) - return; - - for (reg = 0; reg < 32; reg++) - current->thread.fpu.fpr[reg] = *(ptr++); - restore_fp(current); -} - /* * Similar to regs_to_gdb_regs() except that process is sleeping and so * we may not be able to get all the info. @@ -242,7 +329,7 @@ static struct notifier_block kgdb_notifier = { }; /* - * Handle the 's' and 'c' commands + * Handle the 'c' command */ int kgdb_arch_handle_exception(int vector, int signo, int err_code, char *remcom_in_buffer, char *remcom_out_buffer, @@ -250,20 +337,14 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, { char *ptr; unsigned long address; - int cpu = smp_processor_id(); switch (remcom_in_buffer[0]) { - case 's': case 'c': /* handle the optional parameter */ ptr = &remcom_in_buffer[1]; if (kgdb_hex2long(&ptr, &address)) regs->cp0_epc = address; - atomic_set(&kgdb_cpu_doing_single_step, -1); - if (remcom_in_buffer[0] == 's') - atomic_set(&kgdb_cpu_doing_single_step, cpu); - return 0; } diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 1c4565a9102b..444b9f918fdf 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -46,9 +46,6 @@ config GENERIC_FIND_NEXT_BIT config GENERIC_HWEIGHT def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_BUG def_bool y diff --git a/arch/mn10300/include/asm/local64.h b/arch/mn10300/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/mn10300/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 05a366a5c4d5..907417d187e1 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -66,10 +66,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_TIME - bool - default y - config TIME_LOW_RES bool depends on SMP diff --git a/arch/parisc/include/asm/local64.h b/arch/parisc/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/parisc/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c index 9877372ffdba..5beb97bafbb1 100644 --- a/arch/parisc/kernel/ftrace.c +++ b/arch/parisc/kernel/ftrace.c @@ -82,7 +82,7 @@ unsigned long ftrace_return_to_handler(unsigned long retval0, unsigned long ret; pop_return_trace(&trace, &ret); - trace.rettime = cpu_clock(raw_smp_processor_id()); + trace.rettime = local_clock(); ftrace_graph_return(&trace); if (unlikely(!ret)) { @@ -126,7 +126,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) return; } - calltime = cpu_clock(raw_smp_processor_id()); + calltime = local_clock(); if (push_return_trace(old, calltime, self_addr, &trace.depth) == -EBUSY) { diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index e4545f85ee9f..631e5a0fb6ab 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -29,9 +29,6 @@ config MMU config GENERIC_CMOS_UPDATE def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_TIME_VSYSCALL def_bool y @@ -120,6 +117,8 @@ config ARCH_NO_VIRT_TO_BUS config PPC bool default y + select OF + select OF_FLATTREE select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACER @@ -173,10 +172,6 @@ config ARCH_MAY_HAVE_PC_FDC config PPC_OF def_bool y -config OF - def_bool y - select OF_FLATTREE - config PPC_UDBG_16550 bool default n @@ -199,10 +194,6 @@ config SYS_SUPPORTS_APM_EMULATION default y if PMAC_APM_EMU bool -config DTC - bool - default y - config DEFAULT_UIMAGE bool help @@ -579,14 +570,6 @@ config SCHED_SMT when dealing with POWER5 cpus at a cost of slightly increased overhead in some places. If unsure say N here. -config PROC_DEVICETREE - bool "Support for device tree in /proc" - depends on PROC_FS - help - This option adds a device-tree directory under /proc which contains - an image of the device tree that the kernel copies from Open - Firmware or other boot firmware. If unsure, say Y here. - config CMDLINE_BOOL bool "Default bootloader kernel arguments" diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 77cfe7a29e25..5d42f5eae70f 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -94,7 +94,7 @@ else endif endif -LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o +KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o ifeq ($(CONFIG_TUNE_CELL),y) KBUILD_CFLAGS += $(call cc-option,-mtune=cell) diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 5e2e2cfcc81b..3a40a992e594 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -197,6 +197,7 @@ extern const char *powerpc_base_platform; #define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000) #define CPU_FTR_CP_USE_DCBTZ LONG_ASM_CONST(0x0040000000000000) #define CPU_FTR_UNALIGNED_LD_STD LONG_ASM_CONST(0x0080000000000000) +#define CPU_FTR_ASYM_SMT LONG_ASM_CONST(0x0100000000000000) #ifndef __ASSEMBLY__ @@ -412,7 +413,7 @@ extern const char *powerpc_base_platform; CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ - CPU_FTR_DSCR | CPU_FTR_SAO) + CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT) #define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index ecba37a91749..67ab5fb7d153 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -300,34 +300,6 @@ extern unsigned int irq_alloc_virt(struct irq_host *host, */ extern void irq_free_virt(unsigned int virq, unsigned int count); - -/* -- OF helpers -- */ - -/** - * irq_create_of_mapping - Map a hardware interrupt into linux virq space - * @controller: Device node of the interrupt controller - * @inspec: Interrupt specifier from the device-tree - * @intsize: Size of the interrupt specifier from the device-tree - * - * This function is identical to irq_create_mapping except that it takes - * as input informations straight from the device-tree (typically the results - * of the of_irq_map_*() functions. - */ -extern unsigned int irq_create_of_mapping(struct device_node *controller, - const u32 *intspec, unsigned int intsize); - -/** - * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space - * @device: Device node of the device whose interrupt is to be mapped - * @index: Index of the interrupt to map - * - * This function is a wrapper that chains of_irq_map_one() and - * irq_create_of_mapping() to make things easier to callers - */ -extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index); - -/* -- End OF helpers -- */ - /** * irq_early_init - Init irq remapping subsystem */ diff --git a/arch/powerpc/include/asm/local64.h b/arch/powerpc/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/powerpc/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h index 675e159b5ef4..7ab82c825a03 100644 --- a/arch/powerpc/include/asm/macio.h +++ b/arch/powerpc/include/asm/macio.h @@ -38,7 +38,7 @@ struct macio_dev { struct macio_bus *bus; /* macio bus this device is on */ struct macio_dev *media_bay; /* Device is part of a media bay */ - struct of_device ofdev; + struct platform_device ofdev; struct device_dma_parameters dma_parms; /* ide needs that */ int n_resources; struct resource resource[MACIO_DEV_COUNT_RESOURCES]; diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h deleted file mode 100644 index 444e97e2982e..000000000000 --- a/arch/powerpc/include/asm/of_device.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _ASM_POWERPC_OF_DEVICE_H -#define _ASM_POWERPC_OF_DEVICE_H -#ifdef __KERNEL__ - -#include <linux/device.h> -#include <linux/of.h> - -/* - * The of_device is a kind of "base class" that is a superset of - * struct device for use by devices attached to an OF node and - * probed using OF properties. - */ -struct of_device -{ - struct device dev; /* Generic device interface */ - struct pdev_archdata archdata; -}; - -extern struct of_device *of_device_alloc(struct device_node *np, - const char *bus_id, - struct device *parent); - -extern int of_device_uevent(struct device *dev, - struct kobj_uevent_env *env); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_OF_DEVICE_H */ diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h deleted file mode 100644 index d4aaa3489440..000000000000 --- a/arch/powerpc/include/asm/of_platform.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _ASM_POWERPC_OF_PLATFORM_H -#define _ASM_POWERPC_OF_PLATFORM_H -/* - * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. - * <benh@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -/* Platform devices and busses creation */ -extern struct of_device *of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent); -/* pseudo "matches" value to not do deep probe */ -#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1) - -extern int of_platform_bus_probe(struct device_node *root, - const struct of_device_id *matches, - struct device *parent); - -extern struct of_device *of_find_device_by_phandle(phandle ph); - -extern void of_instantiate_rtc(void); - -#endif /* _ASM_POWERPC_OF_PLATFORM_H */ diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 76e1f313a58e..51e9e6f90d12 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -303,13 +303,8 @@ extern void pcibios_free_controller(struct pci_controller *phb); extern void pcibios_setup_phb_resources(struct pci_controller *hose); #ifdef CONFIG_PCI -extern unsigned long pci_address_to_pio(phys_addr_t address); extern int pcibios_vaddr_is_ioport(void __iomem *address); #else -static inline unsigned long pci_address_to_pio(phys_addr_t address) -{ - return (unsigned long)-1; -} static inline int pcibios_vaddr_is_ioport(void __iomem *address) { return 0; diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h index e6d4ce69b126..5c16b891d501 100644 --- a/arch/powerpc/include/asm/perf_event.h +++ b/arch/powerpc/include/asm/perf_event.h @@ -21,3 +21,15 @@ #ifdef CONFIG_FSL_EMB_PERF_EVENT #include <asm/perf_event_fsl_emb.h> #endif + +#ifdef CONFIG_PERF_EVENTS +#include <asm/ptrace.h> +#include <asm/reg.h> + +#define perf_arch_fetch_caller_regs(regs, __ip) \ + do { \ + (regs)->nip = __ip; \ + (regs)->gpr[1] = *(unsigned long *)__get_SP(); \ + asm volatile("mfmsr %0" : "=r" ((regs)->msr)); \ + } while (0) +#endif diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index ddd408a93b5a..ae26f2efd089 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -17,9 +17,6 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/types.h> -#include <linux/of_fdt.h> -#include <linux/proc_fs.h> -#include <linux/platform_device.h> #include <asm/irq.h> #include <asm/atomic.h> @@ -43,49 +40,14 @@ extern void pci_create_OF_bus_map(void); * OF address retreival & translation */ -/* Translate an OF address block into a CPU physical address - */ -extern u64 of_translate_address(struct device_node *np, const u32 *addr); - /* Translate a DMA address from device space to CPU space */ extern u64 of_translate_dma_address(struct device_node *dev, const u32 *in_addr); -/* Extract an address from a device, returns the region size and - * the address space flags too. The PCI version uses a BAR number - * instead of an absolute index - */ -extern const u32 *of_get_address(struct device_node *dev, int index, - u64 *size, unsigned int *flags); #ifdef CONFIG_PCI -extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, - u64 *size, unsigned int *flags); -#else -static inline const u32 *of_get_pci_address(struct device_node *dev, - int bar_no, u64 *size, unsigned int *flags) -{ - return NULL; -} -#endif /* CONFIG_PCI */ - -/* Get an address as a resource. Note that if your address is - * a PIO address, the conversion will fail if the physical address - * can't be internally converted to an IO token with - * pci_address_to_pio(), that is because it's either called to early - * or it can't be matched to any host bridge IO space - */ -extern int of_address_to_resource(struct device_node *dev, int index, - struct resource *r); -#ifdef CONFIG_PCI -extern int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r); -#else -static inline int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r) -{ - return -ENOSYS; -} -#endif /* CONFIG_PCI */ +extern unsigned long pci_address_to_pio(phys_addr_t address); +#define pci_address_to_pio pci_address_to_pio +#endif /* CONFIG_PCI */ /* Parse the ibm,dma-window property of an OF node into the busno, phys and * size parameters. @@ -104,69 +66,12 @@ struct device_node *of_find_next_cache_node(struct device_node *np); /* Get the MAC address */ extern const void *of_get_mac_address(struct device_node *np); -/* - * OF interrupt mapping - */ - -/* This structure is returned when an interrupt is mapped. The controller - * field needs to be put() after use - */ - -#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */ - -struct of_irq { - struct device_node *controller; /* Interrupt controller node */ - u32 size; /* Specifier size */ - u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */ -}; - -/** - * of_irq_map_init - Initialize the irq remapper - * @flags: flags defining workarounds to enable - * - * Some machines have bugs in the device-tree which require certain workarounds - * to be applied. Call this before any interrupt mapping attempts to enable - * those workarounds. - */ -#define OF_IMAP_OLDWORLD_MAC 0x00000001 -#define OF_IMAP_NO_PHANDLE 0x00000002 - -extern void of_irq_map_init(unsigned int flags); - -/** - * of_irq_map_raw - Low level interrupt tree parsing - * @parent: the device interrupt parent - * @intspec: interrupt specifier ("interrupts" property of the device) - * @ointsize: size of the passed in interrupt specifier - * @addr: address specifier (start of "reg" property of the device) - * @out_irq: structure of_irq filled by this function - * - * Returns 0 on success and a negative number on error - * - * This function is a low-level interrupt tree walking function. It - * can be used to do a partial walk with synthetized reg and interrupts - * properties, for example when resolving PCI interrupts when no device - * node exist for the parent. - * - */ - -extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, - u32 ointsize, const u32 *addr, - struct of_irq *out_irq); - - -/** - * of_irq_map_one - Resolve an interrupt for a device - * @device: the device whose interrupt is to be resolved - * @index: index of the interrupt to resolve - * @out_irq: structure of_irq filled by this function - * - * This function resolves an interrupt, walking the tree, for a given - * device-tree node. It's the high level pendant to of_irq_map_raw(). - * It also implements the workarounds for OldWolrd Macs. - */ -extern int of_irq_map_one(struct device_node *device, int index, - struct of_irq *out_irq); +#ifdef CONFIG_NUMA +extern int of_node_to_nid(struct device_node *device); +#else +static inline int of_node_to_nid(struct device_node *device) { return 0; } +#endif +#define of_node_to_nid of_node_to_nid /** * of_irq_map_pci - Resolve the interrupt for a PCI device @@ -180,19 +85,19 @@ extern int of_irq_map_one(struct device_node *device, int index, * resolving using the OF tree walking. */ struct pci_dev; +struct of_irq; extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); -extern int of_irq_to_resource(struct device_node *dev, int index, - struct resource *r); +extern void of_instantiate_rtc(void); -/** - * of_iomap - Maps the memory mapped IO for a given device_node - * @device: the device whose io range will be mapped - * @index: index of the io range - * - * Returns a pointer to the mapped memory - */ -extern void __iomem *of_iomap(struct device_node *device, int index); +/* These includes are put at the bottom because they may contain things + * that are overridden by this file. Ideally they shouldn't be included + * by this file, but there are a bunch of .c files that currently depend + * on it. Eventually they will be cleaned up. */ +#include <linux/of_fdt.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> #endif /* __KERNEL__ */ #endif /* _POWERPC_PROM_H */ diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h index 7ae2753da565..e3bdada8c542 100644 --- a/arch/powerpc/include/asm/smu.h +++ b/arch/powerpc/include/asm/smu.h @@ -457,8 +457,8 @@ extern void smu_poll(void); */ extern int smu_init(void); extern int smu_present(void); -struct of_device; -extern struct of_device *smu_get_ofdev(void); +struct platform_device; +extern struct platform_device *smu_get_ofdev(void); /* diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 3033c1b30745..afe4aaa65c3b 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -41,8 +41,6 @@ static inline int cpu_to_node(int cpu) cpu_all_mask : \ node_to_cpumask_map[node]) -int of_node_to_nid(struct device_node *device); - struct pci_bus; #ifdef CONFIG_PCI extern int pcibus_to_node(struct pci_bus *bus); @@ -97,11 +95,6 @@ extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid); #else -static inline int of_node_to_nid(struct device_node *device) -{ - return 0; -} - static inline void dump_numa_cpu_topology(void) {} static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid) diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 77d831a1cc32..1dda70129141 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -41,7 +41,7 @@ obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o -obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o +obj-$(CONFIG_PPC_OF) += of_platform.o prom_parse.o obj-$(CONFIG_PPC_CLOCK) += clock.o procfs-y := proc_powerpc.o obj-$(CONFIG_PROC_FS) += $(procfs-y) diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index 02f724f36753..4295e0b94b2d 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -82,17 +82,9 @@ static struct notifier_block ppc_swiotlb_plat_bus_notifier = { .priority = 0, }; -static struct notifier_block ppc_swiotlb_of_bus_notifier = { - .notifier_call = ppc_swiotlb_bus_notify, - .priority = 0, -}; - int __init swiotlb_setup_bus_notifier(void) { bus_register_notifier(&platform_bus_type, &ppc_swiotlb_plat_bus_notifier); - bus_register_notifier(&of_platform_bus_type, - &ppc_swiotlb_of_bus_notifier); - return 0; } diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 21266abfbda6..9b626cfffce1 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -140,19 +140,19 @@ static struct dma_map_ops ibmebus_dma_ops = { static int ibmebus_match_path(struct device *dev, void *data) { - struct device_node *dn = to_of_device(dev)->dev.of_node; + struct device_node *dn = to_platform_device(dev)->dev.of_node; return (dn->full_name && (strcasecmp((char *)data, dn->full_name) == 0)); } static int ibmebus_match_node(struct device *dev, void *data) { - return to_of_device(dev)->dev.of_node == data; + return to_platform_device(dev)->dev.of_node == data; } static int ibmebus_create_device(struct device_node *dn) { - struct of_device *dev; + struct platform_device *dev; int ret; dev = of_device_alloc(dn, NULL, &ibmebus_bus_device); @@ -298,7 +298,7 @@ static ssize_t ibmebus_store_remove(struct bus_type *bus, if ((dev = bus_find_device(&ibmebus_bus_type, NULL, path, ibmebus_match_path))) { - of_device_unregister(to_of_device(dev)); + of_device_unregister(to_platform_device(dev)); kfree(path); return count; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 8f96d3198905..d3ce67cf03be 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -53,6 +53,8 @@ #include <linux/bootmem.h> #include <linux/pci.h> #include <linux/debugfs.h> +#include <linux/of.h> +#include <linux/of_irq.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -820,18 +822,6 @@ unsigned int irq_create_of_mapping(struct device_node *controller, } EXPORT_SYMBOL_GPL(irq_create_of_mapping); -unsigned int irq_of_parse_and_map(struct device_node *dev, int index) -{ - struct of_irq oirq; - - if (of_irq_map_one(dev, index, &oirq)) - return NO_IRQ; - - return irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); -} -EXPORT_SYMBOL_GPL(irq_of_parse_and_map); - void irq_dispose_mapping(unsigned int virq) { struct irq_host *host; diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 82a7b228c81a..7f61a3ac787c 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -129,7 +129,7 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) return 0; if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr)) - regs->nip += 4; + regs->nip += BREAK_INSTR_SIZE; return 1; } diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 035ada5443ee..c1fd0f9658fd 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -4,6 +4,7 @@ #include <linux/serial_core.h> #include <linux/console.h> #include <linux/pci.h> +#include <linux/of_address.h> #include <linux/of_device.h> #include <asm/io.h> #include <asm/mmu.h> diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S index 22e507c8a556..2d29752cbe16 100644 --- a/arch/powerpc/kernel/misc.S +++ b/arch/powerpc/kernel/misc.S @@ -127,29 +127,3 @@ _GLOBAL(__setup_cpu_power7) _GLOBAL(__restore_cpu_power7) /* place holder */ blr - -/* - * Get a minimal set of registers for our caller's nth caller. - * r3 = regs pointer, r5 = n. - * - * We only get R1 (stack pointer), NIP (next instruction pointer) - * and LR (link register). These are all we can get in the - * general case without doing complicated stack unwinding, but - * fortunately they are enough to do a stack backtrace, which - * is all we need them for. - */ -_GLOBAL(perf_arch_fetch_caller_regs) - mr r6,r1 - cmpwi r5,0 - mflr r4 - ble 2f - mtctr r5 -1: PPC_LL r6,0(r6) - bdnz 1b - PPC_LL r4,PPC_LR_STKOFF(r6) -2: PPC_LL r7,0(r6) - PPC_LL r7,PPC_LR_STKOFF(r7) - PPC_STL r6,GPR1-STACK_FRAME_OVERHEAD(r3) - PPC_STL r4,_NIP-STACK_FRAME_OVERHEAD(r3) - PPC_STL r7,_LINK-STACK_FRAME_OVERHEAD(r3) - blr diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c deleted file mode 100644 index df78e0236a02..000000000000 --- a/arch/powerpc/kernel/of_device.c +++ /dev/null @@ -1,133 +0,0 @@ -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mod_devicetable.h> -#include <linux/slab.h> -#include <linux/of_device.h> - -#include <asm/errno.h> -#include <asm/dcr.h> - -static void of_device_make_bus_id(struct of_device *dev) -{ - static atomic_t bus_no_reg_magic; - struct device_node *node = dev->dev.of_node; - const u32 *reg; - u64 addr; - int magic; - - /* - * If it's a DCR based device, use 'd' for native DCRs - * and 'D' for MMIO DCRs. - */ -#ifdef CONFIG_PPC_DCR - reg = of_get_property(node, "dcr-reg", NULL); - if (reg) { -#ifdef CONFIG_PPC_DCR_NATIVE - dev_set_name(&dev->dev, "d%x.%s", *reg, node->name); -#else /* CONFIG_PPC_DCR_NATIVE */ - addr = of_translate_dcr_address(node, *reg, NULL); - if (addr != OF_BAD_ADDR) { - dev_set_name(&dev->dev, "D%llx.%s", - (unsigned long long)addr, node->name); - return; - } -#endif /* !CONFIG_PPC_DCR_NATIVE */ - } -#endif /* CONFIG_PPC_DCR */ - - /* - * For MMIO, get the physical address - */ - reg = of_get_property(node, "reg", NULL); - if (reg) { - addr = of_translate_address(node, reg); - if (addr != OF_BAD_ADDR) { - dev_set_name(&dev->dev, "%llx.%s", - (unsigned long long)addr, node->name); - return; - } - } - - /* - * No BusID, use the node name and add a globally incremented - * counter (and pray...) - */ - magic = atomic_add_return(1, &bus_no_reg_magic); - dev_set_name(&dev->dev, "%s.%d", node->name, magic - 1); -} - -struct of_device *of_device_alloc(struct device_node *np, - const char *bus_id, - struct device *parent) -{ - struct of_device *dev; - - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) - return NULL; - - dev->dev.of_node = of_node_get(np); - dev->dev.dma_mask = &dev->archdata.dma_mask; - dev->dev.parent = parent; - dev->dev.release = of_release_dev; - - if (bus_id) - dev_set_name(&dev->dev, "%s", bus_id); - else - of_device_make_bus_id(dev); - - return dev; -} -EXPORT_SYMBOL(of_device_alloc); - -int of_device_uevent(struct device *dev, struct kobj_uevent_env *env) -{ - struct of_device *ofdev; - const char *compat; - int seen = 0, cplen, sl; - - if (!dev) - return -ENODEV; - - ofdev = to_of_device(dev); - - if (add_uevent_var(env, "OF_NAME=%s", ofdev->dev.of_node->name)) - return -ENOMEM; - - if (add_uevent_var(env, "OF_TYPE=%s", ofdev->dev.of_node->type)) - return -ENOMEM; - - /* Since the compatible field can contain pretty much anything - * it's not really legal to split it out with commas. We split it - * up using a number of environment variables instead. */ - - compat = of_get_property(ofdev->dev.of_node, "compatible", &cplen); - while (compat && *compat && cplen > 0) { - if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat)) - return -ENOMEM; - - sl = strlen (compat) + 1; - compat += sl; - cplen -= sl; - seen++; - } - - if (add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen)) - return -ENOMEM; - - /* modalias is trickier, we add it in 2 steps */ - if (add_uevent_var(env, "MODALIAS=")) - return -ENOMEM; - sl = of_device_get_modalias(ofdev, &env->buf[env->buflen-1], - sizeof(env->buf) - env->buflen); - if (sl >= (sizeof(env->buf) - env->buflen)) - return -ENOMEM; - env->buflen += sl; - - return 0; -} -EXPORT_SYMBOL(of_device_uevent); -EXPORT_SYMBOL(of_device_get_modalias); diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 487a98851ba6..b2c363ef38ad 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -28,207 +28,6 @@ #include <asm/ppc-pci.h> #include <asm/atomic.h> -/* - * The list of OF IDs below is used for matching bus types in the - * system whose devices are to be exposed as of_platform_devices. - * - * This is the default list valid for most platforms. This file provides - * functions who can take an explicit list if necessary though - * - * The search is always performed recursively looking for children of - * the provided device_node and recursively if such a children matches - * a bus type in the list - */ - -static const struct of_device_id of_default_bus_ids[] = { - { .type = "soc", }, - { .compatible = "soc", }, - { .type = "spider", }, - { .type = "axon", }, - { .type = "plb5", }, - { .type = "plb4", }, - { .type = "opb", }, - { .type = "ebc", }, - {}, -}; - -struct bus_type of_platform_bus_type = { - .uevent = of_device_uevent, -}; -EXPORT_SYMBOL(of_platform_bus_type); - -static int __init of_bus_driver_init(void) -{ - return of_bus_type_init(&of_platform_bus_type, "of_platform"); -} - -postcore_initcall(of_bus_driver_init); - -struct of_device* of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent) -{ - struct of_device *dev; - - dev = of_device_alloc(np, bus_id, parent); - if (!dev) - return NULL; - - dev->archdata.dma_mask = 0xffffffffUL; - dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - - dev->dev.bus = &of_platform_bus_type; - - /* We do not fill the DMA ops for platform devices by default. - * This is currently the responsibility of the platform code - * to do such, possibly using a device notifier - */ - - if (of_device_register(dev) != 0) { - of_device_free(dev); - return NULL; - } - - return dev; -} -EXPORT_SYMBOL(of_platform_device_create); - - - -/** - * of_platform_bus_create - Create an OF device for a bus node and all its - * children. Optionally recursively instanciate matching busses. - * @bus: device node of the bus to instanciate - * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to - * disallow recursive creation of child busses - */ -static int of_platform_bus_create(const struct device_node *bus, - const struct of_device_id *matches, - struct device *parent) -{ - struct device_node *child; - struct of_device *dev; - int rc = 0; - - for_each_child_of_node(bus, child) { - pr_debug(" create child: %s\n", child->full_name); - dev = of_platform_device_create(child, NULL, parent); - if (dev == NULL) - rc = -ENOMEM; - else if (!of_match_node(matches, child)) - continue; - if (rc == 0) { - pr_debug(" and sub busses\n"); - rc = of_platform_bus_create(child, matches, &dev->dev); - } if (rc) { - of_node_put(child); - break; - } - } - return rc; -} - -/** - * of_platform_bus_probe - Probe the device-tree for platform busses - * @root: parent of the first level to probe or NULL for the root of the tree - * @matches: match table, NULL to use the default - * @parent: parent to hook devices from, NULL for toplevel - * - * Note that children of the provided root are not instanciated as devices - * unless the specified root itself matches the bus list and is not NULL. - */ - -int of_platform_bus_probe(struct device_node *root, - const struct of_device_id *matches, - struct device *parent) -{ - struct device_node *child; - struct of_device *dev; - int rc = 0; - - if (matches == NULL) - matches = of_default_bus_ids; - if (matches == OF_NO_DEEP_PROBE) - return -EINVAL; - if (root == NULL) - root = of_find_node_by_path("/"); - else - of_node_get(root); - - pr_debug("of_platform_bus_probe()\n"); - pr_debug(" starting at: %s\n", root->full_name); - - /* Do a self check of bus type, if there's a match, create - * children - */ - if (of_match_node(matches, root)) { - pr_debug(" root match, create all sub devices\n"); - dev = of_platform_device_create(root, NULL, parent); - if (dev == NULL) { - rc = -ENOMEM; - goto bail; - } - pr_debug(" create all sub busses\n"); - rc = of_platform_bus_create(root, matches, &dev->dev); - goto bail; - } - for_each_child_of_node(root, child) { - if (!of_match_node(matches, child)) - continue; - - pr_debug(" match: %s\n", child->full_name); - dev = of_platform_device_create(child, NULL, parent); - if (dev == NULL) - rc = -ENOMEM; - else - rc = of_platform_bus_create(child, matches, &dev->dev); - if (rc) { - of_node_put(child); - break; - } - } - bail: - of_node_put(root); - return rc; -} -EXPORT_SYMBOL(of_platform_bus_probe); - -static int of_dev_node_match(struct device *dev, void *data) -{ - return to_of_device(dev)->dev.of_node == data; -} - -struct of_device *of_find_device_by_node(struct device_node *np) -{ - struct device *dev; - - dev = bus_find_device(&of_platform_bus_type, - NULL, np, of_dev_node_match); - if (dev) - return to_of_device(dev); - return NULL; -} -EXPORT_SYMBOL(of_find_device_by_node); - -static int of_dev_phandle_match(struct device *dev, void *data) -{ - phandle *ph = data; - return to_of_device(dev)->dev.of_node->phandle == *ph; -} - -struct of_device *of_find_device_by_phandle(phandle ph) -{ - struct device *dev; - - dev = bus_find_device(&of_platform_bus_type, - NULL, &ph, of_dev_phandle_match); - if (dev) - return to_of_device(dev); - return NULL; -} -EXPORT_SYMBOL(of_find_device_by_phandle); - - #ifdef CONFIG_PPC_OF_PLATFORM_PCI /* The probing of PCI controllers from of_platform is currently @@ -237,7 +36,7 @@ EXPORT_SYMBOL(of_find_device_by_phandle); * lacking some bits needed here. */ -static int __devinit of_pci_phb_probe(struct of_device *dev, +static int __devinit of_pci_phb_probe(struct platform_device *dev, const struct of_device_id *match) { struct pci_controller *phb; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 5b38f6ae2b29..9021c4ad4bbd 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -21,6 +21,7 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/bootmem.h> +#include <linux/of_address.h> #include <linux/mm.h> #include <linux/list.h> #include <linux/syscalls.h> diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c index 5c14ffe51258..d301a30445e0 100644 --- a/arch/powerpc/kernel/perf_event.c +++ b/arch/powerpc/kernel/perf_event.c @@ -410,15 +410,15 @@ static void power_pmu_read(struct perf_event *event) * Therefore we treat them like NMIs. */ do { - prev = atomic64_read(&event->hw.prev_count); + prev = local64_read(&event->hw.prev_count); barrier(); val = read_pmc(event->hw.idx); - } while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev); + } while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev); /* The counters are only 32 bits wide */ delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &event->count); - atomic64_sub(delta, &event->hw.period_left); + local64_add(delta, &event->count); + local64_sub(delta, &event->hw.period_left); } /* @@ -444,10 +444,10 @@ static void freeze_limited_counters(struct cpu_hw_events *cpuhw, if (!event->hw.idx) continue; val = (event->hw.idx == 5) ? pmc5 : pmc6; - prev = atomic64_read(&event->hw.prev_count); + prev = local64_read(&event->hw.prev_count); event->hw.idx = 0; delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &event->count); + local64_add(delta, &event->count); } } @@ -462,7 +462,7 @@ static void thaw_limited_counters(struct cpu_hw_events *cpuhw, event = cpuhw->limited_counter[i]; event->hw.idx = cpuhw->limited_hwidx[i]; val = (event->hw.idx == 5) ? pmc5 : pmc6; - atomic64_set(&event->hw.prev_count, val); + local64_set(&event->hw.prev_count, val); perf_event_update_userpage(event); } } @@ -666,11 +666,11 @@ void hw_perf_enable(void) } val = 0; if (event->hw.sample_period) { - left = atomic64_read(&event->hw.period_left); + left = local64_read(&event->hw.period_left); if (left < 0x80000000L) val = 0x80000000L - left; } - atomic64_set(&event->hw.prev_count, val); + local64_set(&event->hw.prev_count, val); event->hw.idx = idx; write_pmc(idx, val); perf_event_update_userpage(event); @@ -754,7 +754,7 @@ static int power_pmu_enable(struct perf_event *event) * skip the schedulability test here, it will be peformed * at commit time(->commit_txn) as a whole */ - if (cpuhw->group_flag & PERF_EVENT_TXN_STARTED) + if (cpuhw->group_flag & PERF_EVENT_TXN) goto nocheck; if (check_excludes(cpuhw->event, cpuhw->flags, n0, 1)) @@ -845,8 +845,8 @@ static void power_pmu_unthrottle(struct perf_event *event) if (left < 0x80000000L) val = 0x80000000L - left; write_pmc(event->hw.idx, val); - atomic64_set(&event->hw.prev_count, val); - atomic64_set(&event->hw.period_left, left); + local64_set(&event->hw.prev_count, val); + local64_set(&event->hw.period_left, left); perf_event_update_userpage(event); perf_enable(); local_irq_restore(flags); @@ -861,7 +861,7 @@ void power_pmu_start_txn(const struct pmu *pmu) { struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); - cpuhw->group_flag |= PERF_EVENT_TXN_STARTED; + cpuhw->group_flag |= PERF_EVENT_TXN; cpuhw->n_txn_start = cpuhw->n_events; } @@ -874,7 +874,7 @@ void power_pmu_cancel_txn(const struct pmu *pmu) { struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); - cpuhw->group_flag &= ~PERF_EVENT_TXN_STARTED; + cpuhw->group_flag &= ~PERF_EVENT_TXN; } /* @@ -900,6 +900,7 @@ int power_pmu_commit_txn(const struct pmu *pmu) for (i = cpuhw->n_txn_start; i < n; ++i) cpuhw->event[i]->hw.config = cpuhw->events[i]; + cpuhw->group_flag &= ~PERF_EVENT_TXN; return 0; } @@ -1111,7 +1112,7 @@ const struct pmu *hw_perf_event_init(struct perf_event *event) event->hw.config = events[n]; event->hw.event_base = cflags[n]; event->hw.last_period = event->hw.sample_period; - atomic64_set(&event->hw.period_left, event->hw.last_period); + local64_set(&event->hw.period_left, event->hw.last_period); /* * See if we need to reserve the PMU. @@ -1149,16 +1150,16 @@ static void record_and_restart(struct perf_event *event, unsigned long val, int record = 0; /* we don't have to worry about interrupts here */ - prev = atomic64_read(&event->hw.prev_count); + prev = local64_read(&event->hw.prev_count); delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &event->count); + local64_add(delta, &event->count); /* * See if the total period for this event has expired, * and update for the next period. */ val = 0; - left = atomic64_read(&event->hw.period_left) - delta; + left = local64_read(&event->hw.period_left) - delta; if (period) { if (left <= 0) { left += period; @@ -1196,8 +1197,8 @@ static void record_and_restart(struct perf_event *event, unsigned long val, } write_pmc(event->hw.idx, val); - atomic64_set(&event->hw.prev_count, val); - atomic64_set(&event->hw.period_left, left); + local64_set(&event->hw.prev_count, val); + local64_set(&event->hw.period_left, left); perf_event_update_userpage(event); } diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c index babcceecd2ea..1ba45471ae43 100644 --- a/arch/powerpc/kernel/perf_event_fsl_emb.c +++ b/arch/powerpc/kernel/perf_event_fsl_emb.c @@ -162,15 +162,15 @@ static void fsl_emb_pmu_read(struct perf_event *event) * Therefore we treat them like NMIs. */ do { - prev = atomic64_read(&event->hw.prev_count); + prev = local64_read(&event->hw.prev_count); barrier(); val = read_pmc(event->hw.idx); - } while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev); + } while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev); /* The counters are only 32 bits wide */ delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &event->count); - atomic64_sub(delta, &event->hw.period_left); + local64_add(delta, &event->count); + local64_sub(delta, &event->hw.period_left); } /* @@ -296,11 +296,11 @@ static int fsl_emb_pmu_enable(struct perf_event *event) val = 0; if (event->hw.sample_period) { - s64 left = atomic64_read(&event->hw.period_left); + s64 left = local64_read(&event->hw.period_left); if (left < 0x80000000L) val = 0x80000000L - left; } - atomic64_set(&event->hw.prev_count, val); + local64_set(&event->hw.prev_count, val); write_pmc(i, val); perf_event_update_userpage(event); @@ -371,8 +371,8 @@ static void fsl_emb_pmu_unthrottle(struct perf_event *event) if (left < 0x80000000L) val = 0x80000000L - left; write_pmc(event->hw.idx, val); - atomic64_set(&event->hw.prev_count, val); - atomic64_set(&event->hw.period_left, left); + local64_set(&event->hw.prev_count, val); + local64_set(&event->hw.period_left, left); perf_event_update_userpage(event); perf_enable(); local_irq_restore(flags); @@ -500,7 +500,7 @@ const struct pmu *hw_perf_event_init(struct perf_event *event) return ERR_PTR(-ENOTSUPP); event->hw.last_period = event->hw.sample_period; - atomic64_set(&event->hw.period_left, event->hw.last_period); + local64_set(&event->hw.period_left, event->hw.last_period); /* * See if we need to reserve the PMU. @@ -541,16 +541,16 @@ static void record_and_restart(struct perf_event *event, unsigned long val, int record = 0; /* we don't have to worry about interrupts here */ - prev = atomic64_read(&event->hw.prev_count); + prev = local64_read(&event->hw.prev_count); delta = (val - prev) & 0xfffffffful; - atomic64_add(delta, &event->count); + local64_add(delta, &event->count); /* * See if the total period for this event has expired, * and update for the next period. */ val = 0; - left = atomic64_read(&event->hw.period_left) - delta; + left = local64_read(&event->hw.period_left) - delta; if (period) { if (left <= 0) { left += period; @@ -569,6 +569,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val, struct perf_sample_data data; perf_sample_data_init(&data, 0); + data.period = event->hw.last_period; if (perf_event_overflow(event, nmi, &data, regs)) { /* @@ -584,8 +585,8 @@ static void record_and_restart(struct perf_event *event, unsigned long val, } write_pmc(event->hw.idx, val); - atomic64_set(&event->hw.prev_count, val); - atomic64_set(&event->hw.period_left, left); + local64_set(&event->hw.prev_count, val); + local64_set(&event->hw.period_left, left); perf_event_update_userpage(event); } diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 551f6713ff42..e78a5add7f15 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1299,3 +1299,14 @@ unsigned long randomize_et_dyn(unsigned long base) return ret; } + +#ifdef CONFIG_SMP +int arch_sd_sibling_asym_packing(void) +{ + if (cpu_has_feature(CPU_FTR_ASYM_SMT)) { + printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n"); + return SD_ASYM_PACKING; + } + return 0; +} +#endif diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 8362620c9e6f..88334af038e5 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -6,232 +6,11 @@ #include <linux/module.h> #include <linux/ioport.h> #include <linux/etherdevice.h> +#include <linux/of_address.h> #include <asm/prom.h> #include <asm/pci-bridge.h> -#ifdef DEBUG -#define DBG(fmt...) do { printk(fmt); } while(0) -#else -#define DBG(fmt...) do { } while(0) -#endif - -#ifdef CONFIG_PPC64 -#define PRu64 "%lx" -#else -#define PRu64 "%llx" -#endif - -/* Max address size we deal with */ -#define OF_MAX_ADDR_CELLS 4 -#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ - (ns) > 0) - -static struct of_bus *of_match_bus(struct device_node *np); -static int __of_address_to_resource(struct device_node *dev, - const u32 *addrp, u64 size, unsigned int flags, - struct resource *r); - - -/* Debug utility */ -#ifdef DEBUG -static void of_dump_addr(const char *s, const u32 *addr, int na) -{ - printk("%s", s); - while(na--) - printk(" %08x", *(addr++)); - printk("\n"); -} -#else -static void of_dump_addr(const char *s, const u32 *addr, int na) { } -#endif - - -/* Callbacks for bus specific translators */ -struct of_bus { - const char *name; - const char *addresses; - int (*match)(struct device_node *parent); - void (*count_cells)(struct device_node *child, - int *addrc, int *sizec); - u64 (*map)(u32 *addr, const u32 *range, - int na, int ns, int pna); - int (*translate)(u32 *addr, u64 offset, int na); - unsigned int (*get_flags)(const u32 *addr); -}; - - -/* - * Default translator (generic bus) - */ - -static void of_bus_default_count_cells(struct device_node *dev, - int *addrc, int *sizec) -{ - if (addrc) - *addrc = of_n_addr_cells(dev); - if (sizec) - *sizec = of_n_size_cells(dev); -} - -static u64 of_bus_default_map(u32 *addr, const u32 *range, - int na, int ns, int pna) -{ - u64 cp, s, da; - - cp = of_read_number(range, na); - s = of_read_number(range + na + pna, ns); - da = of_read_number(addr, na); - - DBG("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n", - cp, s, da); - - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; -} - -static int of_bus_default_translate(u32 *addr, u64 offset, int na) -{ - u64 a = of_read_number(addr, na); - memset(addr, 0, na * 4); - a += offset; - if (na > 1) - addr[na - 2] = a >> 32; - addr[na - 1] = a & 0xffffffffu; - - return 0; -} - -static unsigned int of_bus_default_get_flags(const u32 *addr) -{ - return IORESOURCE_MEM; -} - - #ifdef CONFIG_PCI -/* - * PCI bus specific translator - */ - -static int of_bus_pci_match(struct device_node *np) -{ - /* "vci" is for the /chaos bridge on 1st-gen PCI powermacs */ - return !strcmp(np->type, "pci") || !strcmp(np->type, "vci"); -} - -static void of_bus_pci_count_cells(struct device_node *np, - int *addrc, int *sizec) -{ - if (addrc) - *addrc = 3; - if (sizec) - *sizec = 2; -} - -static unsigned int of_bus_pci_get_flags(const u32 *addr) -{ - unsigned int flags = 0; - u32 w = addr[0]; - - switch((w >> 24) & 0x03) { - case 0x01: - flags |= IORESOURCE_IO; - break; - case 0x02: /* 32 bits */ - case 0x03: /* 64 bits */ - flags |= IORESOURCE_MEM; - break; - } - if (w & 0x40000000) - flags |= IORESOURCE_PREFETCH; - return flags; -} - -static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna) -{ - u64 cp, s, da; - unsigned int af, rf; - - af = of_bus_pci_get_flags(addr); - rf = of_bus_pci_get_flags(range); - - /* Check address type match */ - if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO)) - return OF_BAD_ADDR; - - /* Read address values, skipping high cell */ - cp = of_read_number(range + 1, na - 1); - s = of_read_number(range + na + pna, ns); - da = of_read_number(addr + 1, na - 1); - - DBG("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); - - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; -} - -static int of_bus_pci_translate(u32 *addr, u64 offset, int na) -{ - return of_bus_default_translate(addr + 1, offset, na - 1); -} - -const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, - unsigned int *flags) -{ - const u32 *prop; - unsigned int psize; - struct device_node *parent; - struct of_bus *bus; - int onesize, i, na, ns; - - /* Get parent & match bus type */ - parent = of_get_parent(dev); - if (parent == NULL) - return NULL; - bus = of_match_bus(parent); - if (strcmp(bus->name, "pci")) { - of_node_put(parent); - return NULL; - } - bus->count_cells(dev, &na, &ns); - of_node_put(parent); - if (!OF_CHECK_COUNTS(na, ns)) - return NULL; - - /* Get "reg" or "assigned-addresses" property */ - prop = of_get_property(dev, bus->addresses, &psize); - if (prop == NULL) - return NULL; - psize /= 4; - - onesize = na + ns; - for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) - if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { - if (size) - *size = of_read_number(prop + na, ns); - if (flags) - *flags = bus->get_flags(prop); - return prop; - } - return NULL; -} -EXPORT_SYMBOL(of_get_pci_address); - -int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r) -{ - const u32 *addrp; - u64 size; - unsigned int flags; - - addrp = of_get_pci_address(dev, bar, &size, &flags); - if (addrp == NULL) - return -EINVAL; - return __of_address_to_resource(dev, addrp, size, flags, r); -} -EXPORT_SYMBOL_GPL(of_pci_address_to_resource); - int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) { struct device_node *dn, *ppnode; @@ -313,345 +92,6 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) EXPORT_SYMBOL_GPL(of_irq_map_pci); #endif /* CONFIG_PCI */ -/* - * ISA bus specific translator - */ - -static int of_bus_isa_match(struct device_node *np) -{ - return !strcmp(np->name, "isa"); -} - -static void of_bus_isa_count_cells(struct device_node *child, - int *addrc, int *sizec) -{ - if (addrc) - *addrc = 2; - if (sizec) - *sizec = 1; -} - -static u64 of_bus_isa_map(u32 *addr, const u32 *range, int na, int ns, int pna) -{ - u64 cp, s, da; - - /* Check address type match */ - if ((addr[0] ^ range[0]) & 0x00000001) - return OF_BAD_ADDR; - - /* Read address values, skipping high cell */ - cp = of_read_number(range + 1, na - 1); - s = of_read_number(range + na + pna, ns); - da = of_read_number(addr + 1, na - 1); - - DBG("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); - - if (da < cp || da >= (cp + s)) - return OF_BAD_ADDR; - return da - cp; -} - -static int of_bus_isa_translate(u32 *addr, u64 offset, int na) -{ - return of_bus_default_translate(addr + 1, offset, na - 1); -} - -static unsigned int of_bus_isa_get_flags(const u32 *addr) -{ - unsigned int flags = 0; - u32 w = addr[0]; - - if (w & 1) - flags |= IORESOURCE_IO; - else - flags |= IORESOURCE_MEM; - return flags; -} - - -/* - * Array of bus specific translators - */ - -static struct of_bus of_busses[] = { -#ifdef CONFIG_PCI - /* PCI */ - { - .name = "pci", - .addresses = "assigned-addresses", - .match = of_bus_pci_match, - .count_cells = of_bus_pci_count_cells, - .map = of_bus_pci_map, - .translate = of_bus_pci_translate, - .get_flags = of_bus_pci_get_flags, - }, -#endif /* CONFIG_PCI */ - /* ISA */ - { - .name = "isa", - .addresses = "reg", - .match = of_bus_isa_match, - .count_cells = of_bus_isa_count_cells, - .map = of_bus_isa_map, - .translate = of_bus_isa_translate, - .get_flags = of_bus_isa_get_flags, - }, - /* Default */ - { - .name = "default", - .addresses = "reg", - .match = NULL, - .count_cells = of_bus_default_count_cells, - .map = of_bus_default_map, - .translate = of_bus_default_translate, - .get_flags = of_bus_default_get_flags, - }, -}; - -static struct of_bus *of_match_bus(struct device_node *np) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(of_busses); i ++) - if (!of_busses[i].match || of_busses[i].match(np)) - return &of_busses[i]; - BUG(); - return NULL; -} - -static int of_translate_one(struct device_node *parent, struct of_bus *bus, - struct of_bus *pbus, u32 *addr, - int na, int ns, int pna, const char *rprop) -{ - const u32 *ranges; - unsigned int rlen; - int rone; - u64 offset = OF_BAD_ADDR; - - /* Normally, an absence of a "ranges" property means we are - * crossing a non-translatable boundary, and thus the addresses - * below the current not cannot be converted to CPU physical ones. - * Unfortunately, while this is very clear in the spec, it's not - * what Apple understood, and they do have things like /uni-n or - * /ht nodes with no "ranges" property and a lot of perfectly - * useable mapped devices below them. Thus we treat the absence of - * "ranges" as equivalent to an empty "ranges" property which means - * a 1:1 translation at that level. It's up to the caller not to try - * to translate addresses that aren't supposed to be translated in - * the first place. --BenH. - */ - ranges = of_get_property(parent, rprop, &rlen); - if (ranges == NULL || rlen == 0) { - offset = of_read_number(addr, na); - memset(addr, 0, pna * 4); - DBG("OF: no ranges, 1:1 translation\n"); - goto finish; - } - - DBG("OF: walking ranges...\n"); - - /* Now walk through the ranges */ - rlen /= 4; - rone = na + pna + ns; - for (; rlen >= rone; rlen -= rone, ranges += rone) { - offset = bus->map(addr, ranges, na, ns, pna); - if (offset != OF_BAD_ADDR) - break; - } - if (offset == OF_BAD_ADDR) { - DBG("OF: not found !\n"); - return 1; - } - memcpy(addr, ranges + na, 4 * pna); - - finish: - of_dump_addr("OF: parent translation for:", addr, pna); - DBG("OF: with offset: "PRu64"\n", offset); - - /* Translate it into parent bus space */ - return pbus->translate(addr, offset, pna); -} - - -/* - * Translate an address from the device-tree into a CPU physical address, - * this walks up the tree and applies the various bus mappings on the - * way. - * - * Note: We consider that crossing any level with #size-cells == 0 to mean - * that translation is impossible (that is we are not dealing with a value - * that can be mapped to a cpu physical address). This is not really specified - * that way, but this is traditionally the way IBM at least do things - */ -u64 __of_translate_address(struct device_node *dev, const u32 *in_addr, - const char *rprop) -{ - struct device_node *parent = NULL; - struct of_bus *bus, *pbus; - u32 addr[OF_MAX_ADDR_CELLS]; - int na, ns, pna, pns; - u64 result = OF_BAD_ADDR; - - DBG("OF: ** translation for device %s **\n", dev->full_name); - - /* Increase refcount at current level */ - of_node_get(dev); - - /* Get parent & match bus type */ - parent = of_get_parent(dev); - if (parent == NULL) - goto bail; - bus = of_match_bus(parent); - - /* Cound address cells & copy address locally */ - bus->count_cells(dev, &na, &ns); - if (!OF_CHECK_COUNTS(na, ns)) { - printk(KERN_ERR "prom_parse: Bad cell count for %s\n", - dev->full_name); - goto bail; - } - memcpy(addr, in_addr, na * 4); - - DBG("OF: bus is %s (na=%d, ns=%d) on %s\n", - bus->name, na, ns, parent->full_name); - of_dump_addr("OF: translating address:", addr, na); - - /* Translate */ - for (;;) { - /* Switch to parent bus */ - of_node_put(dev); - dev = parent; - parent = of_get_parent(dev); - - /* If root, we have finished */ - if (parent == NULL) { - DBG("OF: reached root node\n"); - result = of_read_number(addr, na); - break; - } - - /* Get new parent bus and counts */ - pbus = of_match_bus(parent); - pbus->count_cells(dev, &pna, &pns); - if (!OF_CHECK_COUNTS(pna, pns)) { - printk(KERN_ERR "prom_parse: Bad cell count for %s\n", - dev->full_name); - break; - } - - DBG("OF: parent bus is %s (na=%d, ns=%d) on %s\n", - pbus->name, pna, pns, parent->full_name); - - /* Apply bus translation */ - if (of_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop)) - break; - - /* Complete the move up one level */ - na = pna; - ns = pns; - bus = pbus; - - of_dump_addr("OF: one level translation:", addr, na); - } - bail: - of_node_put(parent); - of_node_put(dev); - - return result; -} - -u64 of_translate_address(struct device_node *dev, const u32 *in_addr) -{ - return __of_translate_address(dev, in_addr, "ranges"); -} -EXPORT_SYMBOL(of_translate_address); - -u64 of_translate_dma_address(struct device_node *dev, const u32 *in_addr) -{ - return __of_translate_address(dev, in_addr, "dma-ranges"); -} -EXPORT_SYMBOL(of_translate_dma_address); - -const u32 *of_get_address(struct device_node *dev, int index, u64 *size, - unsigned int *flags) -{ - const u32 *prop; - unsigned int psize; - struct device_node *parent; - struct of_bus *bus; - int onesize, i, na, ns; - - /* Get parent & match bus type */ - parent = of_get_parent(dev); - if (parent == NULL) - return NULL; - bus = of_match_bus(parent); - bus->count_cells(dev, &na, &ns); - of_node_put(parent); - if (!OF_CHECK_COUNTS(na, ns)) - return NULL; - - /* Get "reg" or "assigned-addresses" property */ - prop = of_get_property(dev, bus->addresses, &psize); - if (prop == NULL) - return NULL; - psize /= 4; - - onesize = na + ns; - for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) - if (i == index) { - if (size) - *size = of_read_number(prop + na, ns); - if (flags) - *flags = bus->get_flags(prop); - return prop; - } - return NULL; -} -EXPORT_SYMBOL(of_get_address); - -static int __of_address_to_resource(struct device_node *dev, const u32 *addrp, - u64 size, unsigned int flags, - struct resource *r) -{ - u64 taddr; - - if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0) - return -EINVAL; - taddr = of_translate_address(dev, addrp); - if (taddr == OF_BAD_ADDR) - return -EINVAL; - memset(r, 0, sizeof(struct resource)); - if (flags & IORESOURCE_IO) { - unsigned long port; - port = pci_address_to_pio(taddr); - if (port == (unsigned long)-1) - return -EINVAL; - r->start = port; - r->end = port + size - 1; - } else { - r->start = taddr; - r->end = taddr + size - 1; - } - r->flags = flags; - r->name = dev->name; - return 0; -} - -int of_address_to_resource(struct device_node *dev, int index, - struct resource *r) -{ - const u32 *addrp; - u64 size; - unsigned int flags; - - addrp = of_get_address(dev, index, &size, &flags); - if (addrp == NULL) - return -EINVAL; - return __of_address_to_resource(dev, addrp, size, flags, r); -} -EXPORT_SYMBOL_GPL(of_address_to_resource); - void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) { @@ -678,342 +118,6 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, *size = of_read_number(dma_window, cells); } -/* - * Interrupt remapper - */ - -static unsigned int of_irq_workarounds; -static struct device_node *of_irq_dflt_pic; - -static struct device_node *of_irq_find_parent(struct device_node *child) -{ - struct device_node *p; - const phandle *parp; - - if (!of_node_get(child)) - return NULL; - - do { - parp = of_get_property(child, "interrupt-parent", NULL); - if (parp == NULL) - p = of_get_parent(child); - else { - if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) - p = of_node_get(of_irq_dflt_pic); - else - p = of_find_node_by_phandle(*parp); - } - of_node_put(child); - child = p; - } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL); - - return p; -} - -/* This doesn't need to be called if you don't have any special workaround - * flags to pass - */ -void of_irq_map_init(unsigned int flags) -{ - of_irq_workarounds = flags; - - /* OldWorld, don't bother looking at other things */ - if (flags & OF_IMAP_OLDWORLD_MAC) - return; - - /* If we don't have phandles, let's try to locate a default interrupt - * controller (happens when booting with BootX). We do a first match - * here, hopefully, that only ever happens on machines with one - * controller. - */ - if (flags & OF_IMAP_NO_PHANDLE) { - struct device_node *np; - - for_each_node_with_property(np, "interrupt-controller") { - /* Skip /chosen/interrupt-controller */ - if (strcmp(np->name, "chosen") == 0) - continue; - /* It seems like at least one person on this planet wants - * to use BootX on a machine with an AppleKiwi controller - * which happens to pretend to be an interrupt - * controller too. - */ - if (strcmp(np->name, "AppleKiwi") == 0) - continue; - /* I think we found one ! */ - of_irq_dflt_pic = np; - break; - } - } - -} - -int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize, - const u32 *addr, struct of_irq *out_irq) -{ - struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; - const u32 *tmp, *imap, *imask; - u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; - int imaplen, match, i; - - DBG("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n", - parent->full_name, intspec[0], intspec[1], ointsize); - - ipar = of_node_get(parent); - - /* First get the #interrupt-cells property of the current cursor - * that tells us how to interpret the passed-in intspec. If there - * is none, we are nice and just walk up the tree - */ - do { - tmp = of_get_property(ipar, "#interrupt-cells", NULL); - if (tmp != NULL) { - intsize = *tmp; - break; - } - tnode = ipar; - ipar = of_irq_find_parent(ipar); - of_node_put(tnode); - } while (ipar); - if (ipar == NULL) { - DBG(" -> no parent found !\n"); - goto fail; - } - - DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize); - - if (ointsize != intsize) - return -EINVAL; - - /* Look for this #address-cells. We have to implement the old linux - * trick of looking for the parent here as some device-trees rely on it - */ - old = of_node_get(ipar); - do { - tmp = of_get_property(old, "#address-cells", NULL); - tnode = of_get_parent(old); - of_node_put(old); - old = tnode; - } while(old && tmp == NULL); - of_node_put(old); - old = NULL; - addrsize = (tmp == NULL) ? 2 : *tmp; - - DBG(" -> addrsize=%d\n", addrsize); - - /* Now start the actual "proper" walk of the interrupt tree */ - while (ipar != NULL) { - /* Now check if cursor is an interrupt-controller and if it is - * then we are done - */ - if (of_get_property(ipar, "interrupt-controller", NULL) != - NULL) { - DBG(" -> got it !\n"); - memcpy(out_irq->specifier, intspec, - intsize * sizeof(u32)); - out_irq->size = intsize; - out_irq->controller = ipar; - of_node_put(old); - return 0; - } - - /* Now look for an interrupt-map */ - imap = of_get_property(ipar, "interrupt-map", &imaplen); - /* No interrupt map, check for an interrupt parent */ - if (imap == NULL) { - DBG(" -> no map, getting parent\n"); - newpar = of_irq_find_parent(ipar); - goto skiplevel; - } - imaplen /= sizeof(u32); - - /* Look for a mask */ - imask = of_get_property(ipar, "interrupt-map-mask", NULL); - - /* If we were passed no "reg" property and we attempt to parse - * an interrupt-map, then #address-cells must be 0. - * Fail if it's not. - */ - if (addr == NULL && addrsize != 0) { - DBG(" -> no reg passed in when needed !\n"); - goto fail; - } - - /* Parse interrupt-map */ - match = 0; - while (imaplen > (addrsize + intsize + 1) && !match) { - /* Compare specifiers */ - match = 1; - for (i = 0; i < addrsize && match; ++i) { - u32 mask = imask ? imask[i] : 0xffffffffu; - match = ((addr[i] ^ imap[i]) & mask) == 0; - } - for (; i < (addrsize + intsize) && match; ++i) { - u32 mask = imask ? imask[i] : 0xffffffffu; - match = - ((intspec[i-addrsize] ^ imap[i]) & mask) == 0; - } - imap += addrsize + intsize; - imaplen -= addrsize + intsize; - - DBG(" -> match=%d (imaplen=%d)\n", match, imaplen); - - /* Get the interrupt parent */ - if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) - newpar = of_node_get(of_irq_dflt_pic); - else - newpar = of_find_node_by_phandle((phandle)*imap); - imap++; - --imaplen; - - /* Check if not found */ - if (newpar == NULL) { - DBG(" -> imap parent not found !\n"); - goto fail; - } - - /* Get #interrupt-cells and #address-cells of new - * parent - */ - tmp = of_get_property(newpar, "#interrupt-cells", NULL); - if (tmp == NULL) { - DBG(" -> parent lacks #interrupt-cells !\n"); - goto fail; - } - newintsize = *tmp; - tmp = of_get_property(newpar, "#address-cells", NULL); - newaddrsize = (tmp == NULL) ? 0 : *tmp; - - DBG(" -> newintsize=%d, newaddrsize=%d\n", - newintsize, newaddrsize); - - /* Check for malformed properties */ - if (imaplen < (newaddrsize + newintsize)) - goto fail; - - imap += newaddrsize + newintsize; - imaplen -= newaddrsize + newintsize; - - DBG(" -> imaplen=%d\n", imaplen); - } - if (!match) - goto fail; - - of_node_put(old); - old = of_node_get(newpar); - addrsize = newaddrsize; - intsize = newintsize; - intspec = imap - intsize; - addr = intspec - addrsize; - - skiplevel: - /* Iterate again with new parent */ - DBG(" -> new parent: %s\n", newpar ? newpar->full_name : "<>"); - of_node_put(ipar); - ipar = newpar; - newpar = NULL; - } - fail: - of_node_put(ipar); - of_node_put(old); - of_node_put(newpar); - - return -EINVAL; -} -EXPORT_SYMBOL_GPL(of_irq_map_raw); - -#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) -static int of_irq_map_oldworld(struct device_node *device, int index, - struct of_irq *out_irq) -{ - const u32 *ints = NULL; - int intlen; - - /* - * Old machines just have a list of interrupt numbers - * and no interrupt-controller nodes. We also have dodgy - * cases where the APPL,interrupts property is completely - * missing behind pci-pci bridges and we have to get it - * from the parent (the bridge itself, as apple just wired - * everything together on these) - */ - while (device) { - ints = of_get_property(device, "AAPL,interrupts", &intlen); - if (ints != NULL) - break; - device = device->parent; - if (device && strcmp(device->type, "pci") != 0) - break; - } - if (ints == NULL) - return -EINVAL; - intlen /= sizeof(u32); - - if (index >= intlen) - return -EINVAL; - - out_irq->controller = NULL; - out_irq->specifier[0] = ints[index]; - out_irq->size = 1; - - return 0; -} -#else /* defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) */ -static int of_irq_map_oldworld(struct device_node *device, int index, - struct of_irq *out_irq) -{ - return -EINVAL; -} -#endif /* !(defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)) */ - -int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq) -{ - struct device_node *p; - const u32 *intspec, *tmp, *addr; - u32 intsize, intlen; - int res = -EINVAL; - - DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index); - - /* OldWorld mac stuff is "special", handle out of line */ - if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) - return of_irq_map_oldworld(device, index, out_irq); - - /* Get the interrupts property */ - intspec = of_get_property(device, "interrupts", &intlen); - if (intspec == NULL) - return -EINVAL; - intlen /= sizeof(u32); - - /* Get the reg property (if any) */ - addr = of_get_property(device, "reg", NULL); - - /* Look for the interrupt parent. */ - p = of_irq_find_parent(device); - if (p == NULL) - return -EINVAL; - - /* Get size of interrupt specifier */ - tmp = of_get_property(p, "#interrupt-cells", NULL); - if (tmp == NULL) - goto out; - intsize = *tmp; - - DBG(" intsize=%d intlen=%d\n", intsize, intlen); - - /* Check index */ - if ((index + 1) * intsize > intlen) - goto out; - - /* Get new specifier and map it */ - res = of_irq_map_raw(p, intspec + index * intsize, intsize, - addr, out_irq); -out: - of_node_put(p); - return res; -} -EXPORT_SYMBOL_GPL(of_irq_map_one); - /** * Search the device tree for the best MAC address to use. 'mac-address' is * checked first, because that is supposed to contain to "most recent" MAC @@ -1051,29 +155,3 @@ const void *of_get_mac_address(struct device_node *np) return NULL; } EXPORT_SYMBOL(of_get_mac_address); - -int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) -{ - int irq = irq_of_parse_and_map(dev, index); - - /* Only dereference the resource if both the - * resource and the irq are valid. */ - if (r && irq != NO_IRQ) { - r->start = r->end = irq; - r->flags = IORESOURCE_IRQ; - } - - return irq; -} -EXPORT_SYMBOL_GPL(of_irq_to_resource); - -void __iomem *of_iomap(struct device_node *np, int index) -{ - struct resource res; - - if (of_address_to_resource(np, index, &res)) - return NULL; - - return ioremap(res.start, 1 + res.end - res.start); -} -EXPORT_SYMBOL(of_iomap); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 70decd8068ca..15ade0d7bbb2 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -714,16 +714,9 @@ static struct notifier_block ppc_dflt_plat_bus_notifier = { .priority = INT_MAX, }; -static struct notifier_block ppc_dflt_of_bus_notifier = { - .notifier_call = ppc_dflt_bus_notify, - .priority = INT_MAX, -}; - static int __init setup_bus_notifier(void) { bus_register_notifier(&platform_bus_type, &ppc_dflt_plat_bus_notifier); - bus_register_notifier(&of_platform_bus_type, &ppc_dflt_of_bus_notifier); - return 0; } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index ccb8759c8532..ce53dfa7130d 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -796,10 +796,30 @@ static cycle_t timebase_read(struct clocksource *cs) return (cycle_t)get_tb(); } -static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, - u64 new_tb_to_xs, struct timespec *now, - u32 frac_sec) +void update_vsyscall(struct timespec *wall_time, struct timespec *wtm, + struct clocksource *clock, u32 mult) { + u64 new_tb_to_xs, new_stamp_xsec; + u32 frac_sec; + + if (clock != &clocksource_timebase) + return; + + /* Make userspace gettimeofday spin until we're done. */ + ++vdso_data->tb_update_count; + smp_mb(); + + /* XXX this assumes clock->shift == 22 */ + /* 4611686018 ~= 2^(20+64-22) / 1e9 */ + new_tb_to_xs = (u64) mult * 4611686018ULL; + new_stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC; + do_div(new_stamp_xsec, 1000000000); + new_stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC; + + BUG_ON(wall_time->tv_nsec >= NSEC_PER_SEC); + /* this is tv_nsec / 1e9 as a 0.32 fraction */ + frac_sec = ((u64) wall_time->tv_nsec * 18446744073ULL) >> 32; + /* * tb_update_count is used to allow the userspace gettimeofday code * to assure itself that it sees a consistent view of the tb_to_xs and @@ -811,43 +831,17 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, * We expect the caller to have done the first increment of * vdso_data->tb_update_count already. */ - vdso_data->tb_orig_stamp = new_tb_stamp; + vdso_data->tb_orig_stamp = clock->cycle_last; vdso_data->stamp_xsec = new_stamp_xsec; vdso_data->tb_to_xs = new_tb_to_xs; - vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec; - vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec; - vdso_data->stamp_xtime = *now; + vdso_data->wtom_clock_sec = wtm->tv_sec; + vdso_data->wtom_clock_nsec = wtm->tv_nsec; + vdso_data->stamp_xtime = *wall_time; vdso_data->stamp_sec_fraction = frac_sec; smp_wmb(); ++(vdso_data->tb_update_count); } -void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, - u32 mult) -{ - u64 t2x, stamp_xsec; - u32 frac_sec; - - if (clock != &clocksource_timebase) - return; - - /* Make userspace gettimeofday spin until we're done. */ - ++vdso_data->tb_update_count; - smp_mb(); - - /* XXX this assumes clock->shift == 22 */ - /* 4611686018 ~= 2^(20+64-22) / 1e9 */ - t2x = (u64) mult * 4611686018ULL; - stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC; - do_div(stamp_xsec, 1000000000); - stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC; - - BUG_ON(wall_time->tv_nsec >= NSEC_PER_SEC); - /* this is tv_nsec / 1e9 as a 0.32 fraction */ - frac_sec = ((u64) wall_time->tv_nsec * 18446744073ULL) >> 32; - update_gtod(clock->cycle_last, stamp_xsec, t2x, wall_time, frac_sec); -} - void update_vsyscall_tz(void) { /* Make userspace gettimeofday spin until we're done. */ diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index e1c5cd6650b1..5b243bd3eb3b 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -678,7 +678,7 @@ static void psc_clks_init(void) { struct device_node *np; const u32 *cell_index; - struct of_device *ofdev; + struct platform_device *ofdev; for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") { cell_index = of_get_property(np, "cell-index", NULL); diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index 6d584f4e3c9a..de55bc0584b5 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -18,6 +18,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/root_dev.h> #include <linux/initrd.h> #include <asm/time.h> diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c index ca5305a5bd61..0dad9a935eb5 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c @@ -147,26 +147,25 @@ mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) return 0; } -static int __devinit mpc52xx_wkup_gpiochip_probe(struct of_device *ofdev, +static int __devinit mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev, const struct of_device_id *match) { struct mpc52xx_gpiochip *chip; struct mpc52xx_gpio_wkup __iomem *regs; - struct of_gpio_chip *ofchip; + struct gpio_chip *gc; int ret; chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (!chip) return -ENOMEM; - ofchip = &chip->mmchip.of_gc; + gc = &chip->mmchip.gc; - ofchip->gpio_cells = 2; - ofchip->gc.ngpio = 8; - ofchip->gc.direction_input = mpc52xx_wkup_gpio_dir_in; - ofchip->gc.direction_output = mpc52xx_wkup_gpio_dir_out; - ofchip->gc.get = mpc52xx_wkup_gpio_get; - ofchip->gc.set = mpc52xx_wkup_gpio_set; + gc->ngpio = 8; + gc->direction_input = mpc52xx_wkup_gpio_dir_in; + gc->direction_output = mpc52xx_wkup_gpio_dir_out; + gc->get = mpc52xx_wkup_gpio_get; + gc->set = mpc52xx_wkup_gpio_set; ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip); if (ret) @@ -180,7 +179,7 @@ static int __devinit mpc52xx_wkup_gpiochip_probe(struct of_device *ofdev, return 0; } -static int mpc52xx_gpiochip_remove(struct of_device *ofdev) +static int mpc52xx_gpiochip_remove(struct platform_device *ofdev) { return -EBUSY; } @@ -311,11 +310,11 @@ mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) return 0; } -static int __devinit mpc52xx_simple_gpiochip_probe(struct of_device *ofdev, +static int __devinit mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev, const struct of_device_id *match) { struct mpc52xx_gpiochip *chip; - struct of_gpio_chip *ofchip; + struct gpio_chip *gc; struct mpc52xx_gpio __iomem *regs; int ret; @@ -323,14 +322,13 @@ static int __devinit mpc52xx_simple_gpiochip_probe(struct of_device *ofdev, if (!chip) return -ENOMEM; - ofchip = &chip->mmchip.of_gc; + gc = &chip->mmchip.gc; - ofchip->gpio_cells = 2; - ofchip->gc.ngpio = 32; - ofchip->gc.direction_input = mpc52xx_simple_gpio_dir_in; - ofchip->gc.direction_output = mpc52xx_simple_gpio_dir_out; - ofchip->gc.get = mpc52xx_simple_gpio_get; - ofchip->gc.set = mpc52xx_simple_gpio_set; + gc->ngpio = 32; + gc->direction_input = mpc52xx_simple_gpio_dir_in; + gc->direction_output = mpc52xx_simple_gpio_dir_out; + gc->get = mpc52xx_simple_gpio_get; + gc->set = mpc52xx_simple_gpio_set; ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip); if (ret) diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index 46c93578cbf0..fea833e18ad5 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -78,7 +78,7 @@ MODULE_LICENSE("GPL"); * @dev: pointer to device structure * @regs: virtual address of GPT registers * @lock: spinlock to coordinate between different functions. - * @of_gc: of_gpio_chip instance structure; used when GPIO is enabled + * @gc: gpio_chip instance structure; used when GPIO is enabled * @irqhost: Pointer to irq_host instance; used when IRQ mode is supported * @wdt_mode: only relevant for gpt0: bit 0 (MPC52xx_GPT_CAN_WDT) indicates * if the gpt may be used as wdt, bit 1 (MPC52xx_GPT_IS_WDT) indicates @@ -94,7 +94,7 @@ struct mpc52xx_gpt_priv { u8 wdt_mode; #if defined(CONFIG_GPIOLIB) - struct of_gpio_chip of_gc; + struct gpio_chip gc; #endif }; @@ -280,7 +280,7 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node) #if defined(CONFIG_GPIOLIB) static inline struct mpc52xx_gpt_priv *gc_to_mpc52xx_gpt(struct gpio_chip *gc) { - return container_of(to_of_gpio_chip(gc), struct mpc52xx_gpt_priv,of_gc); + return container_of(gc, struct mpc52xx_gpt_priv, gc); } static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio) @@ -336,28 +336,25 @@ mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node) if (!of_find_property(node, "gpio-controller", NULL)) return; - gpt->of_gc.gc.label = kstrdup(node->full_name, GFP_KERNEL); - if (!gpt->of_gc.gc.label) { + gpt->gc.label = kstrdup(node->full_name, GFP_KERNEL); + if (!gpt->gc.label) { dev_err(gpt->dev, "out of memory\n"); return; } - gpt->of_gc.gpio_cells = 2; - gpt->of_gc.gc.ngpio = 1; - gpt->of_gc.gc.direction_input = mpc52xx_gpt_gpio_dir_in; - gpt->of_gc.gc.direction_output = mpc52xx_gpt_gpio_dir_out; - gpt->of_gc.gc.get = mpc52xx_gpt_gpio_get; - gpt->of_gc.gc.set = mpc52xx_gpt_gpio_set; - gpt->of_gc.gc.base = -1; - gpt->of_gc.xlate = of_gpio_simple_xlate; - node->data = &gpt->of_gc; - of_node_get(node); + gpt->gc.ngpio = 1; + gpt->gc.direction_input = mpc52xx_gpt_gpio_dir_in; + gpt->gc.direction_output = mpc52xx_gpt_gpio_dir_out; + gpt->gc.get = mpc52xx_gpt_gpio_get; + gpt->gc.set = mpc52xx_gpt_gpio_set; + gpt->gc.base = -1; + gpt->gc.of_node = node; /* Setup external pin in GPIO mode */ clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK, MPC52xx_GPT_MODE_MS_GPIO); - rc = gpiochip_add(&gpt->of_gc.gc); + rc = gpiochip_add(&gpt->gc); if (rc) dev_err(gpt->dev, "gpiochip_add() failed; rc=%i\n", rc); @@ -723,7 +720,7 @@ static inline int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt, /* --------------------------------------------------------------------- * of_platform bus binding code */ -static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev, +static int __devinit mpc52xx_gpt_probe(struct platform_device *ofdev, const struct of_device_id *match) { struct mpc52xx_gpt_priv *gpt; @@ -769,7 +766,7 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev, return 0; } -static int mpc52xx_gpt_remove(struct of_device *ofdev) +static int mpc52xx_gpt_remove(struct platform_device *ofdev) { return -EBUSY; } diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index e86aec644501..f4ac213c89c0 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -436,8 +436,8 @@ void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req) } EXPORT_SYMBOL(mpc52xx_lpbfifo_abort); -static int __devinit -mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit mpc52xx_lpbfifo_probe(struct platform_device *op, + const struct of_device_id *match) { struct resource res; int rc = -ENOMEM; @@ -507,7 +507,7 @@ mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match) } -static int __devexit mpc52xx_lpbfifo_remove(struct of_device *op) +static int __devexit mpc52xx_lpbfifo_remove(struct platform_device *op) { if (lpbfifo.dev != &op->dev) return 0; diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c index 9f2e52b36f91..1565e0446dc8 100644 --- a/arch/powerpc/platforms/82xx/ep8248e.c +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -111,7 +111,7 @@ static struct mdiobb_ctrl ep8248e_mdio_ctrl = { .ops = &ep8248e_mdio_ops, }; -static int __devinit ep8248e_mdio_probe(struct of_device *ofdev, +static int __devinit ep8248e_mdio_probe(struct platform_device *ofdev, const struct of_device_id *match) { struct mii_bus *bus; @@ -154,7 +154,7 @@ err_free_bus: return ret; } -static int ep8248e_mdio_remove(struct of_device *ofdev) +static int ep8248e_mdio_remove(struct platform_device *ofdev) { BUG(); return 0; diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c index d119a7c1c17a..70798ac911ef 100644 --- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c +++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c @@ -35,9 +35,8 @@ struct mcu { struct mutex lock; - struct device_node *np; struct i2c_client *client; - struct of_gpio_chip of_gc; + struct gpio_chip gc; u8 reg_ctrl; }; @@ -56,8 +55,7 @@ static void mcu_power_off(void) static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) { - struct of_gpio_chip *of_gc = to_of_gpio_chip(gc); - struct mcu *mcu = container_of(of_gc, struct mcu, of_gc); + struct mcu *mcu = container_of(gc, struct mcu, gc); u8 bit = 1 << (4 + gpio); mutex_lock(&mcu->lock); @@ -79,9 +77,7 @@ static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) static int mcu_gpiochip_add(struct mcu *mcu) { struct device_node *np; - struct of_gpio_chip *of_gc = &mcu->of_gc; - struct gpio_chip *gc = &of_gc->gc; - int ret; + struct gpio_chip *gc = &mcu->gc; np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx"); if (!np) @@ -94,32 +90,14 @@ static int mcu_gpiochip_add(struct mcu *mcu) gc->base = -1; gc->set = mcu_gpio_set; gc->direction_output = mcu_gpio_dir_out; - of_gc->gpio_cells = 2; - of_gc->xlate = of_gpio_simple_xlate; + gc->of_node = np; - np->data = of_gc; - mcu->np = np; - - /* - * We don't want to lose the node, its ->data and ->full_name... - * So, if succeeded, we don't put the node here. - */ - ret = gpiochip_add(gc); - if (ret) - of_node_put(np); - return ret; + return gpiochip_add(gc); } static int mcu_gpiochip_remove(struct mcu *mcu) { - int ret; - - ret = gpiochip_remove(&mcu->of_gc.gc); - if (ret) - return ret; - of_node_put(mcu->np); - - return 0; + return gpiochip_remove(&mcu->gc); } static int __devinit mcu_probe(struct i2c_client *client, @@ -182,10 +160,16 @@ static const struct i2c_device_id mcu_ids[] = { }; MODULE_DEVICE_TABLE(i2c, mcu_ids); +static struct of_device_id mcu_of_match_table[] __devinitdata = { + { .compatible = "fsl,mcu-mpc8349emitx", }, + { }, +}; + static struct i2c_driver mcu_driver = { .driver = { .name = "mcu-mpc8349emitx", .owner = THIS_MODULE, + .of_match_table = mcu_of_match_table, }, .probe = mcu_probe, .remove = __devexit_p(mcu_remove), diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index ebe6c3537209..75ae77f1af6a 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -99,7 +99,7 @@ struct pmc_type { int has_deep_sleep; }; -static struct of_device *pmc_dev; +static struct platform_device *pmc_dev; static int has_deep_sleep, deep_sleeping; static int pmc_irq; static struct mpc83xx_pmc __iomem *pmc_regs; @@ -318,7 +318,7 @@ static struct platform_suspend_ops mpc83xx_suspend_ops = { .end = mpc83xx_suspend_end, }; -static int pmc_probe(struct of_device *ofdev, +static int pmc_probe(struct platform_device *ofdev, const struct of_device_id *match) { struct device_node *np = ofdev->dev.of_node; @@ -396,7 +396,7 @@ out: return ret; } -static int pmc_remove(struct of_device *ofdev) +static int pmc_remove(struct platform_device *ofdev) { return -EPERM; }; diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c index b8cb08dbd89c..4ff7b1e7bbad 100644 --- a/arch/powerpc/platforms/86xx/gef_gpio.c +++ b/arch/powerpc/platforms/86xx/gef_gpio.c @@ -118,12 +118,12 @@ static int __init gef_gpio_init(void) } /* Setup pointers to chip functions */ - gef_gpio_chip->of_gc.gpio_cells = 2; - gef_gpio_chip->of_gc.gc.ngpio = 19; - gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in; - gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out; - gef_gpio_chip->of_gc.gc.get = gef_gpio_get; - gef_gpio_chip->of_gc.gc.set = gef_gpio_set; + gef_gpio_chip->gc.of_gpio_n_cells = 2; + gef_gpio_chip->gc.ngpio = 19; + gef_gpio_chip->gc.direction_input = gef_gpio_dir_in; + gef_gpio_chip->gc.direction_output = gef_gpio_dir_out; + gef_gpio_chip->gc.get = gef_gpio_get; + gef_gpio_chip->gc.set = gef_gpio_set; /* This function adds a memory mapped GPIO chip */ retval = of_mm_gpiochip_add(np, gef_gpio_chip); @@ -146,12 +146,12 @@ static int __init gef_gpio_init(void) } /* Setup pointers to chip functions */ - gef_gpio_chip->of_gc.gpio_cells = 2; - gef_gpio_chip->of_gc.gc.ngpio = 6; - gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in; - gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out; - gef_gpio_chip->of_gc.gc.get = gef_gpio_get; - gef_gpio_chip->of_gc.gc.set = gef_gpio_set; + gef_gpio_chip->gc.of_gpio_n_cells = 2; + gef_gpio_chip->gc.ngpio = 6; + gef_gpio_chip->gc.direction_input = gef_gpio_dir_in; + gef_gpio_chip->gc.direction_output = gef_gpio_dir_out; + gef_gpio_chip->gc.get = gef_gpio_get; + gef_gpio_chip->gc.set = gef_gpio_set; /* This function adds a memory mapped GPIO chip */ retval = of_mm_gpiochip_add(np, gef_gpio_chip); diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c index fb4eb0df054c..03aabc0e16ac 100644 --- a/arch/powerpc/platforms/amigaone/setup.c +++ b/arch/powerpc/platforms/amigaone/setup.c @@ -13,12 +13,13 @@ */ #include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <linux/seq_file.h> #include <generated/utsrelease.h> #include <asm/machdep.h> #include <asm/cputable.h> -#include <asm/prom.h> #include <asm/pci-bridge.h> #include <asm/i8259.h> #include <asm/time.h> diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index 6257e5378615..97085530aa63 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -328,7 +328,7 @@ static struct irq_host_ops msic_host_ops = { .map = msic_host_map, }; -static int axon_msi_shutdown(struct of_device *device) +static int axon_msi_shutdown(struct platform_device *device) { struct axon_msic *msic = dev_get_drvdata(&device->dev); u32 tmp; @@ -342,7 +342,7 @@ static int axon_msi_shutdown(struct of_device *device) return 0; } -static int axon_msi_probe(struct of_device *device, +static int axon_msi_probe(struct platform_device *device, const struct of_device_id *device_id) { struct device_node *dn = device->dev.of_node; diff --git a/arch/powerpc/platforms/cell/beat_iommu.c b/arch/powerpc/platforms/cell/beat_iommu.c index 39d361c5c6d2..beec405eb6f8 100644 --- a/arch/powerpc/platforms/cell/beat_iommu.c +++ b/arch/powerpc/platforms/cell/beat_iommu.c @@ -108,7 +108,7 @@ static int __init celleb_init_iommu(void) celleb_init_direct_mapping(); set_pci_dma_ops(&dma_direct_ops); ppc_md.pci_dma_dev_setup = celleb_pci_dma_dev_setup; - bus_register_notifier(&of_platform_bus_type, &celleb_of_bus_notifier); + bus_register_notifier(&platform_bus_type, &celleb_of_bus_notifier); return 0; } diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 3712900471ba..58b13ce3847e 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -1204,7 +1204,7 @@ static int __init cell_iommu_init(void) /* Register callbacks on OF platform device addition/removal * to handle linking them to the right DMA operations */ - bus_register_notifier(&of_platform_bus_type, &cell_of_bus_notifier); + bus_register_notifier(&platform_bus_type, &cell_of_bus_notifier); return 0; } diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c index c5ce02e84c8e..1b5749042756 100644 --- a/arch/powerpc/platforms/cell/qpace_setup.c +++ b/arch/powerpc/platforms/cell/qpace_setup.c @@ -61,12 +61,24 @@ static void qpace_progress(char *s, unsigned short hex) printk("*** %04x : %s\n", hex, s ? s : ""); } +static const struct of_device_id qpace_bus_ids[] __initdata = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "spider", }, + { .type = "axon", }, + { .type = "plb5", }, + { .type = "plb4", }, + { .type = "opb", }, + { .type = "ebc", }, + {}, +}; + static int __init qpace_publish_devices(void) { int node; /* Publish OF platform devices for southbridge IOs */ - of_platform_bus_probe(NULL, NULL, NULL); + of_platform_bus_probe(NULL, qpace_bus_ids, NULL); /* There is no device for the MIC memory controller, thus we create * a platform device for it to attach the EDAC driver to. diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 50385db586bd..691995761b3d 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -141,6 +141,18 @@ static int __devinit cell_setup_phb(struct pci_controller *phb) return 0; } +static const struct of_device_id cell_bus_ids[] __initdata = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "spider", }, + { .type = "axon", }, + { .type = "plb5", }, + { .type = "plb4", }, + { .type = "opb", }, + { .type = "ebc", }, + {}, +}; + static int __init cell_publish_devices(void) { struct device_node *root = of_find_node_by_path("/"); @@ -148,7 +160,7 @@ static int __init cell_publish_devices(void) int node; /* Publish OF platform devices for southbridge IOs */ - of_platform_bus_probe(NULL, NULL, NULL); + of_platform_bus_probe(NULL, cell_bus_ids, NULL); /* On spider based blades, we need to manually create the OF * platform devices for the PCI host bridges diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index d2c1d497846e..33e5fc7334fc 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -30,6 +30,7 @@ #include <linux/init.h> #include <linux/completion.h> #include <linux/delay.h> +#include <linux/proc_fs.h> #include <linux/dma-mapping.h> #include <linux/bcd.h> #include <linux/rtc.h> diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c index 627ee089e75d..a5d907b5a4c2 100644 --- a/arch/powerpc/platforms/pasemi/gpio_mdio.c +++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c @@ -216,7 +216,7 @@ static int gpio_mdio_reset(struct mii_bus *bus) } -static int __devinit gpio_mdio_probe(struct of_device *ofdev, +static int __devinit gpio_mdio_probe(struct platform_device *ofdev, const struct of_device_id *match) { struct device *dev = &ofdev->dev; @@ -275,7 +275,7 @@ out: } -static int gpio_mdio_remove(struct of_device *dev) +static int gpio_mdio_remove(struct platform_device *dev) { struct mii_bus *bus = dev_get_drvdata(&dev->dev); diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 79bd3e89dbaf..39df6ab1735a 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -21,6 +21,8 @@ #include <linux/delay.h> #include <linux/kernel.h> #include <linux/sched.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <linux/spinlock.h> #include <linux/adb.h> #include <linux/pmu.h> diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index 06a137c5b8bb..480567e5fa9a 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -542,11 +542,12 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) /* Make sure IRQ is disabled */ kw_write_reg(reg_ier, 0); - /* Request chip interrupt. We set IRQF_TIMER because we don't + /* Request chip interrupt. We set IRQF_NO_SUSPEND because we don't * want that interrupt disabled between the 2 passes of driver * suspend or we'll have issues running the pfuncs */ - if (request_irq(host->irq, kw_i2c_irq, IRQF_TIMER, "keywest i2c", host)) + if (request_irq(host->irq, kw_i2c_irq, IRQF_NO_SUSPEND, + "keywest i2c", host)) host->irq = NO_IRQ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n", diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 630a533d0e59..890d5f72b198 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -46,6 +46,10 @@ struct pmac_irq_hw { unsigned int level; }; +/* Workaround flags for 32bit powermac machines */ +unsigned int of_irq_workarounds; +struct device_node *of_irq_dflt_pic; + /* Default addresses */ static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4]; @@ -428,6 +432,42 @@ static void __init pmac_pic_probe_oldstyle(void) setup_irq(irq_create_mapping(NULL, 20), &xmon_action); #endif } + +int of_irq_map_oldworld(struct device_node *device, int index, + struct of_irq *out_irq) +{ + const u32 *ints = NULL; + int intlen; + + /* + * Old machines just have a list of interrupt numbers + * and no interrupt-controller nodes. We also have dodgy + * cases where the APPL,interrupts property is completely + * missing behind pci-pci bridges and we have to get it + * from the parent (the bridge itself, as apple just wired + * everything together on these) + */ + while (device) { + ints = of_get_property(device, "AAPL,interrupts", &intlen); + if (ints != NULL) + break; + device = device->parent; + if (device && strcmp(device->type, "pci") != 0) + break; + } + if (ints == NULL) + return -EINVAL; + intlen /= sizeof(u32); + + if (index >= intlen) + return -EINVAL; + + out_irq->controller = NULL; + out_irq->specifier[0] = ints[index]; + out_irq->size = 1; + + return 0; +} #endif /* CONFIG_PPC32 */ static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc) @@ -559,19 +599,39 @@ static int __init pmac_pic_probe_mpic(void) void __init pmac_pic_init(void) { - unsigned int flags = 0; - /* We configure the OF parsing based on our oldworld vs. newworld * platform type and wether we were booted by BootX. */ #ifdef CONFIG_PPC32 if (!pmac_newworld) - flags |= OF_IMAP_OLDWORLD_MAC; + of_irq_workarounds |= OF_IMAP_OLDWORLD_MAC; if (of_get_property(of_chosen, "linux,bootx", NULL) != NULL) - flags |= OF_IMAP_NO_PHANDLE; -#endif /* CONFIG_PPC_32 */ + of_irq_workarounds |= OF_IMAP_NO_PHANDLE; - of_irq_map_init(flags); + /* If we don't have phandles on a newworld, then try to locate a + * default interrupt controller (happens when booting with BootX). + * We do a first match here, hopefully, that only ever happens on + * machines with one controller. + */ + if (pmac_newworld && (of_irq_workarounds & OF_IMAP_NO_PHANDLE)) { + struct device_node *np; + + for_each_node_with_property(np, "interrupt-controller") { + /* Skip /chosen/interrupt-controller */ + if (strcmp(np->name, "chosen") == 0) + continue; + /* It seems like at least one person wants + * to use BootX on a machine with an AppleKiwi + * controller which happens to pretend to be an + * interrupt controller too. */ + if (strcmp(np->name, "AppleKiwi") == 0) + continue; + /* I think we found one ! */ + of_irq_dflt_pic = np; + break; + } + } +#endif /* CONFIG_PPC32 */ /* We first try to detect Apple's new Core99 chipset, since mac-io * is quite different on those machines and contains an IBM MPIC2. diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index 402d2212162f..2659a60bd7b8 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -60,7 +60,7 @@ static int azfs_major, azfs_minor; struct axon_ram_bank { - struct of_device *device; + struct platform_device *device; struct gendisk *disk; unsigned int irq_id; unsigned long ph_addr; @@ -72,7 +72,7 @@ struct axon_ram_bank { static ssize_t axon_ram_sysfs_ecc(struct device *dev, struct device_attribute *attr, char *buf) { - struct of_device *device = to_of_device(dev); + struct platform_device *device = to_platform_device(dev); struct axon_ram_bank *bank = device->dev.platform_data; BUG_ON(!bank); @@ -90,7 +90,7 @@ static DEVICE_ATTR(ecc, S_IRUGO, axon_ram_sysfs_ecc, NULL); static irqreturn_t axon_ram_irq_handler(int irq, void *dev) { - struct of_device *device = dev; + struct platform_device *device = dev; struct axon_ram_bank *bank = device->dev.platform_data; BUG_ON(!bank); @@ -174,8 +174,8 @@ static const struct block_device_operations axon_ram_devops = { * axon_ram_probe - probe() method for platform driver * @device, @device_id: see of_platform_driver method */ -static int -axon_ram_probe(struct of_device *device, const struct of_device_id *device_id) +static int axon_ram_probe(struct platform_device *device, + const struct of_device_id *device_id) { static int axon_ram_bank_id = -1; struct axon_ram_bank *bank; @@ -304,7 +304,7 @@ failed: * @device: see of_platform_driver method */ static int -axon_ram_remove(struct of_device *device) +axon_ram_remove(struct platform_device *device) { struct axon_ram_bank *bank = device->dev.platform_data; diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c index a7c5c470af14..650256115064 100644 --- a/arch/powerpc/sysdev/bestcomm/bestcomm.c +++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c @@ -365,8 +365,8 @@ bcom_engine_cleanup(void) /* OF platform driver */ /* ======================================================================== */ -static int __devinit -mpc52xx_bcom_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit mpc52xx_bcom_probe(struct platform_device *op, + const struct of_device_id *match) { struct device_node *ofn_sram; struct resource res_bcom; @@ -461,8 +461,7 @@ error_ofput: } -static int -mpc52xx_bcom_remove(struct of_device *op) +static int mpc52xx_bcom_remove(struct platform_device *op) { /* Clean up the engine */ bcom_engine_cleanup(); diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/arch/powerpc/sysdev/bestcomm/sram.c index 5d74ef7a651f..1225012a681a 100644 --- a/arch/powerpc/sysdev/bestcomm/sram.c +++ b/arch/powerpc/sysdev/bestcomm/sram.c @@ -11,6 +11,7 @@ * kind, whether express or implied. */ +#include <linux/err.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 8d103ca6d6ab..00852124ff4a 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -621,7 +621,6 @@ int cpm1_gpiochip_add16(struct device_node *np) { struct cpm1_gpio16_chip *cpm1_gc; struct of_mm_gpio_chip *mm_gc; - struct of_gpio_chip *of_gc; struct gpio_chip *gc; cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); @@ -631,11 +630,9 @@ int cpm1_gpiochip_add16(struct device_node *np) spin_lock_init(&cpm1_gc->lock); mm_gc = &cpm1_gc->mm_gc; - of_gc = &mm_gc->of_gc; - gc = &of_gc->gc; + gc = &mm_gc->gc; mm_gc->save_regs = cpm1_gpio16_save_regs; - of_gc->gpio_cells = 2; gc->ngpio = 16; gc->direction_input = cpm1_gpio16_dir_in; gc->direction_output = cpm1_gpio16_dir_out; @@ -745,7 +742,6 @@ int cpm1_gpiochip_add32(struct device_node *np) { struct cpm1_gpio32_chip *cpm1_gc; struct of_mm_gpio_chip *mm_gc; - struct of_gpio_chip *of_gc; struct gpio_chip *gc; cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); @@ -755,11 +751,9 @@ int cpm1_gpiochip_add32(struct device_node *np) spin_lock_init(&cpm1_gc->lock); mm_gc = &cpm1_gc->mm_gc; - of_gc = &mm_gc->of_gc; - gc = &of_gc->gc; + gc = &mm_gc->gc; mm_gc->save_regs = cpm1_gpio32_save_regs; - of_gc->gpio_cells = 2; gc->ngpio = 32; gc->direction_input = cpm1_gpio32_dir_in; gc->direction_output = cpm1_gpio32_dir_out; diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index 88b9812c854f..2b69aa0315b3 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -325,7 +325,6 @@ int cpm2_gpiochip_add32(struct device_node *np) { struct cpm2_gpio32_chip *cpm2_gc; struct of_mm_gpio_chip *mm_gc; - struct of_gpio_chip *of_gc; struct gpio_chip *gc; cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL); @@ -335,11 +334,9 @@ int cpm2_gpiochip_add32(struct device_node *np) spin_lock_init(&cpm2_gc->lock); mm_gc = &cpm2_gc->mm_gc; - of_gc = &mm_gc->of_gc; - gc = &of_gc->gc; + gc = &mm_gc->gc; mm_gc->save_regs = cpm2_gpio32_save_regs; - of_gc->gpio_cells = 2; gc->ngpio = 32; gc->direction_input = cpm2_gpio32_dir_in; gc->direction_output = cpm2_gpio32_dir_out; diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c index eca4545dd52e..7dd2885321ad 100644 --- a/arch/powerpc/sysdev/fsl_gtm.c +++ b/arch/powerpc/sysdev/fsl_gtm.c @@ -14,6 +14,7 @@ */ #include <linux/kernel.h> +#include <linux/err.h> #include <linux/errno.h> #include <linux/list.h> #include <linux/io.h> diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index 962c2d8dd8d9..87991d3abbab 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -250,7 +250,7 @@ unlock: raw_spin_unlock(&desc->lock); } -static int fsl_of_msi_remove(struct of_device *ofdev) +static int fsl_of_msi_remove(struct platform_device *ofdev) { struct fsl_msi *msi = ofdev->dev.platform_data; int virq, i; @@ -274,7 +274,7 @@ static int fsl_of_msi_remove(struct of_device *ofdev) return 0; } -static int __devinit fsl_of_msi_probe(struct of_device *dev, +static int __devinit fsl_of_msi_probe(struct platform_device *dev, const struct of_device_id *match) { struct fsl_msi *msi; diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c index 9082eb921ad9..44de8559c975 100644 --- a/arch/powerpc/sysdev/fsl_pmc.c +++ b/arch/powerpc/sysdev/fsl_pmc.c @@ -58,7 +58,8 @@ static struct platform_suspend_ops pmc_suspend_ops = { .enter = pmc_suspend_enter, }; -static int pmc_probe(struct of_device *ofdev, const struct of_device_id *id) +static int pmc_probe(struct platform_device *ofdev, + const struct of_device_id *id) { pmc_regs = of_iomap(ofdev->dev.of_node, 0); if (!pmc_regs) diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 30e1626b2e85..8bd86530ee25 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1338,7 +1338,7 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr) * master port with system-specific info, and registers the * master port with the RapidIO subsystem. */ -int fsl_rio_setup(struct of_device *dev) +int fsl_rio_setup(struct platform_device *dev) { struct rio_ops *ops; struct rio_mport *port; @@ -1536,7 +1536,7 @@ err_ops: /* The probe function for RapidIO peer-to-peer network. */ -static int __devinit fsl_of_rio_rpn_probe(struct of_device *dev, +static int __devinit fsl_of_rio_rpn_probe(struct platform_device *dev, const struct of_device_id *match) { int rc; diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c index 83f519655fac..2b69084d0f0c 100644 --- a/arch/powerpc/sysdev/mpc8xxx_gpio.c +++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c @@ -257,7 +257,6 @@ static void __init mpc8xxx_add_controller(struct device_node *np) { struct mpc8xxx_gpio_chip *mpc8xxx_gc; struct of_mm_gpio_chip *mm_gc; - struct of_gpio_chip *of_gc; struct gpio_chip *gc; unsigned hwirq; int ret; @@ -271,11 +270,9 @@ static void __init mpc8xxx_add_controller(struct device_node *np) spin_lock_init(&mpc8xxx_gc->lock); mm_gc = &mpc8xxx_gc->mm_gc; - of_gc = &mm_gc->of_gc; - gc = &of_gc->gc; + gc = &mm_gc->gc; mm_gc->save_regs = mpc8xxx_gpio_save_regs; - of_gc->gpio_cells = 2; gc->ngpio = MPC8XXX_GPIO_PINS; gc->direction_input = mpc8xxx_gpio_dir_in; gc->direction_output = mpc8xxx_gpio_dir_out; diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c index 31acd3b1718b..1398bc454999 100644 --- a/arch/powerpc/sysdev/mv64x60_dev.c +++ b/arch/powerpc/sysdev/mv64x60_dev.c @@ -20,12 +20,7 @@ #include <asm/prom.h> -/* - * These functions provide the necessary setup for the mv64x60 drivers. - * These drivers are unusual in that they work on both the MIPS and PowerPC - * architectures. Because of that, the drivers do not support the normal - * PowerPC of_platform_bus_type. They support platform_bus_type instead. - */ +/* These functions provide the necessary setup for the mv64x60 drivers. */ static struct of_device_id __initdata of_mv64x60_devices[] = { { .compatible = "marvell,mv64306-devctrl", }, diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c index 198f288570cc..77bb3f4d530a 100644 --- a/arch/powerpc/sysdev/mv64x60_pci.c +++ b/arch/powerpc/sysdev/mv64x60_pci.c @@ -73,7 +73,6 @@ static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */ .attr = { .name = "hs_reg", .mode = S_IRUGO | S_IWUSR, - .owner = THIS_MODULE, }, .size = MV64X60_VAL_LEN_MAX, .read = mv64x60_hs_reg_read, diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c index d07137a07d75..24a0bb955b18 100644 --- a/arch/powerpc/sysdev/pmi.c +++ b/arch/powerpc/sysdev/pmi.c @@ -43,7 +43,7 @@ struct pmi_data { struct mutex msg_mutex; pmi_message_t msg; struct completion *completion; - struct of_device *dev; + struct platform_device *dev; int irq; u8 __iomem *pmi_reg; struct work_struct work; @@ -121,7 +121,7 @@ static void pmi_notify_handlers(struct work_struct *work) spin_unlock(&data->handler_spinlock); } -static int pmi_of_probe(struct of_device *dev, +static int pmi_of_probe(struct platform_device *dev, const struct of_device_id *match) { struct device_node *np = dev->dev.of_node; @@ -185,7 +185,7 @@ out: return rc; } -static int pmi_of_remove(struct of_device *dev) +static int pmi_of_remove(struct platform_device *dev) { struct pmi_handler *handler, *tmp; diff --git a/arch/powerpc/sysdev/ppc4xx_gpio.c b/arch/powerpc/sysdev/ppc4xx_gpio.c index 3812fc366bec..fc65ad1b3293 100644 --- a/arch/powerpc/sysdev/ppc4xx_gpio.c +++ b/arch/powerpc/sysdev/ppc4xx_gpio.c @@ -181,7 +181,6 @@ static int __init ppc4xx_add_gpiochips(void) int ret; struct ppc4xx_gpio_chip *ppc4xx_gc; struct of_mm_gpio_chip *mm_gc; - struct of_gpio_chip *of_gc; struct gpio_chip *gc; ppc4xx_gc = kzalloc(sizeof(*ppc4xx_gc), GFP_KERNEL); @@ -193,10 +192,8 @@ static int __init ppc4xx_add_gpiochips(void) spin_lock_init(&ppc4xx_gc->lock); mm_gc = &ppc4xx_gc->mm_gc; - of_gc = &mm_gc->of_gc; - gc = &of_gc->gc; + gc = &mm_gc->gc; - of_gc->gpio_cells = 2; gc->ngpio = 32; gc->direction_input = ppc4xx_gpio_dir_in; gc->direction_output = ppc4xx_gpio_dir_out; diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c index dc8f8d618074..36bf845df127 100644 --- a/arch/powerpc/sysdev/qe_lib/gpio.c +++ b/arch/powerpc/sysdev/qe_lib/gpio.c @@ -138,8 +138,8 @@ struct qe_pin { struct qe_pin *qe_pin_request(struct device_node *np, int index) { struct qe_pin *qe_pin; - struct device_node *gc; - struct of_gpio_chip *of_gc = NULL; + struct device_node *gpio_np; + struct gpio_chip *gc; struct of_mm_gpio_chip *mm_gc; struct qe_gpio_chip *qe_gc; int err; @@ -155,40 +155,40 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index) } err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index, - &gc, &gpio_spec); + &gpio_np, &gpio_spec); if (err) { pr_debug("%s: can't parse gpios property\n", __func__); goto err0; } - if (!of_device_is_compatible(gc, "fsl,mpc8323-qe-pario-bank")) { + if (!of_device_is_compatible(gpio_np, "fsl,mpc8323-qe-pario-bank")) { pr_debug("%s: tried to get a non-qe pin\n", __func__); err = -EINVAL; goto err1; } - of_gc = gc->data; - if (!of_gc) { + gc = of_node_to_gpiochip(gpio_np); + if (!gc) { pr_debug("%s: gpio controller %s isn't registered\n", - np->full_name, gc->full_name); + np->full_name, gpio_np->full_name); err = -ENODEV; goto err1; } - gpio_cells = of_get_property(gc, "#gpio-cells", &size); + gpio_cells = of_get_property(gpio_np, "#gpio-cells", &size); if (!gpio_cells || size != sizeof(*gpio_cells) || - *gpio_cells != of_gc->gpio_cells) { + *gpio_cells != gc->of_gpio_n_cells) { pr_debug("%s: wrong #gpio-cells for %s\n", - np->full_name, gc->full_name); + np->full_name, gpio_np->full_name); err = -EINVAL; goto err1; } - err = of_gc->xlate(of_gc, np, gpio_spec, NULL); + err = gc->of_xlate(gc, np, gpio_spec, NULL); if (err < 0) goto err1; - mm_gc = to_of_mm_gpio_chip(&of_gc->gc); + mm_gc = to_of_mm_gpio_chip(gc); qe_gc = to_qe_gpio_chip(mm_gc); spin_lock_irqsave(&qe_gc->lock, flags); @@ -206,7 +206,7 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index) if (!err) return qe_pin; err1: - of_node_put(gc); + of_node_put(gpio_np); err0: kfree(qe_pin); pr_debug("%s failed with status %d\n", __func__, err); @@ -307,7 +307,6 @@ static int __init qe_add_gpiochips(void) int ret; struct qe_gpio_chip *qe_gc; struct of_mm_gpio_chip *mm_gc; - struct of_gpio_chip *of_gc; struct gpio_chip *gc; qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL); @@ -319,11 +318,9 @@ static int __init qe_add_gpiochips(void) spin_lock_init(&qe_gc->lock); mm_gc = &qe_gc->mm_gc; - of_gc = &mm_gc->of_gc; - gc = &of_gc->gc; + gc = &mm_gc->gc; mm_gc->save_regs = qe_gpio_save_regs; - of_gc->gpio_cells = 2; gc->ngpio = QE_PIO_PINS; gc->direction_input = qe_gpio_dir_in; gc->direction_output = qe_gpio_dir_out; diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 093e0ae1a941..3da8014931c9 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -651,14 +651,15 @@ unsigned int qe_get_num_of_snums(void) EXPORT_SYMBOL(qe_get_num_of_snums); #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) -static int qe_resume(struct of_device *ofdev) +static int qe_resume(struct platform_device *ofdev) { if (!qe_alive_during_sleep()) qe_reset(); return 0; } -static int qe_probe(struct of_device *ofdev, const struct of_device_id *id) +static int qe_probe(struct platform_device *ofdev, + const struct of_device_id *id) { return 0; } diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c index d5fb173e588c..b6defda5ccc9 100644 --- a/arch/powerpc/sysdev/simple_gpio.c +++ b/arch/powerpc/sysdev/simple_gpio.c @@ -91,7 +91,6 @@ static int __init u8_simple_gpiochip_add(struct device_node *np) int ret; struct u8_gpio_chip *u8_gc; struct of_mm_gpio_chip *mm_gc; - struct of_gpio_chip *of_gc; struct gpio_chip *gc; u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL); @@ -101,11 +100,9 @@ static int __init u8_simple_gpiochip_add(struct device_node *np) spin_lock_init(&u8_gc->lock); mm_gc = &u8_gc->mm_gc; - of_gc = &mm_gc->of_gc; - gc = &of_gc->gc; + gc = &mm_gc->gc; mm_gc->save_regs = u8_gpio_save_regs; - of_gc->gpio_cells = 2; gc->ngpio = 8; gc->direction_input = u8_gpio_dir_in; gc->direction_output = u8_gpio_dir_out; diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index bee1c0f794cf..f0777a47e3a5 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -40,9 +40,6 @@ config ARCH_HAS_ILOG2_U64 config GENERIC_HWEIGHT def_bool y -config GENERIC_TIME - def_bool y - config GENERIC_TIME_VSYSCALL def_bool y diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 30c5f01f93b0..0c9e6c6d2a64 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -24,7 +24,8 @@ CHECKFLAGS += -D__s390__ -msize-long else LD_BFD := elf64-s390 LDFLAGS := -m elf64_s390 -MODFLAGS += -fpic -D__PIC__ +KBUILD_AFLAGS_MODULE += -fpic -D__PIC__ +KBUILD_CFLAGS_MODULE += -fpic -D__PIC__ KBUILD_CFLAGS += -m64 KBUILD_AFLAGS += -m64 UTS_MACHINE := s390x diff --git a/arch/s390/include/asm/local64.h b/arch/s390/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/s390/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 15a7536452d5..2896cac9c14a 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -207,8 +207,8 @@ struct clocksource * __init clocksource_default_clock(void) return &clocksource_tod; } -void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, - u32 mult) +void update_vsyscall(struct timespec *wall_time, struct timespec *wtm, + struct clocksource *clock, u32 mult) { if (clock != &clocksource_tod) return; @@ -219,8 +219,8 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, vdso_data->xtime_tod_stamp = clock->cycle_last; vdso_data->xtime_clock_sec = wall_time->tv_sec; vdso_data->xtime_clock_nsec = wall_time->tv_nsec; - vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec; - vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec; + vdso_data->wtom_clock_sec = wtm->tv_sec; + vdso_data->wtom_clock_nsec = wtm->tv_nsec; vdso_data->ntp_mult = mult; smp_wmb(); ++vdso_data->tb_update_count; diff --git a/arch/score/Kconfig b/arch/score/Kconfig index 55d413e6dcf2..be4a15584751 100644 --- a/arch/score/Kconfig +++ b/arch/score/Kconfig @@ -55,9 +55,6 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_CLOCKEVENTS def_bool y -config GENERIC_TIME - def_bool y - config SCHED_NO_NO_OMIT_FRAME_POINTER def_bool y diff --git a/arch/score/Makefile b/arch/score/Makefile index 68e0cd06d5c9..d77dc639d8e3 100644 --- a/arch/score/Makefile +++ b/arch/score/Makefile @@ -20,7 +20,8 @@ cflags-y += -G0 -pipe -mel -mnhwloop -D__SCOREEL__ \ # KBUILD_AFLAGS += $(cflags-y) KBUILD_CFLAGS += $(cflags-y) -MODFLAGS += -mlong-calls +KBUILD_AFLAGS_MODULE += -mlong-calls +KBUILD_CFLAGS_MODULE += -mlong-calls LDFLAGS += --oformat elf32-littlescore LDFLAGS_vmlinux += -G0 -static -nostdlib diff --git a/arch/score/include/asm/local64.h b/arch/score/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/score/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 82868fee21fd..33990fa95af0 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -98,9 +98,6 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_IOMAP bool -config GENERIC_TIME - def_bool y - config GENERIC_CLOCKEVENTS def_bool y diff --git a/arch/sh/include/asm/local64.h b/arch/sh/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/sh/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c index 81b6de41ae5d..7a3dc3567258 100644 --- a/arch/sh/kernel/perf_event.c +++ b/arch/sh/kernel/perf_event.c @@ -185,10 +185,10 @@ static void sh_perf_event_update(struct perf_event *event, * this is the simplest approach for maintaining consistency. */ again: - prev_raw_count = atomic64_read(&hwc->prev_count); + prev_raw_count = local64_read(&hwc->prev_count); new_raw_count = sh_pmu->read(idx); - if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count, + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, new_raw_count) != prev_raw_count) goto again; @@ -203,7 +203,7 @@ again: delta = (new_raw_count << shift) - (prev_raw_count << shift); delta >>= shift; - atomic64_add(delta, &event->count); + local64_add(delta, &event->count); } static void sh_pmu_disable(struct perf_event *event) diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index c0015db247ba..491e9d6de191 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -18,6 +18,7 @@ config 64BIT config SPARC bool default y + select OF select HAVE_IDE select HAVE_OPROFILE select HAVE_ARCH_KGDB if !SMP || SPARC64 @@ -66,9 +67,6 @@ config BITS default 32 if SPARC32 default 64 if SPARC64 -config GENERIC_TIME - def_bool y - config ARCH_USES_GETTIMEOFFSET bool default y if SPARC32 @@ -148,9 +146,6 @@ config GENERIC_GPIO config ARCH_NO_VIRT_TO_BUS def_bool y -config OF - def_bool y - config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y if SPARC64 diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h index d4c452147412..daa6a8a5e9cd 100644 --- a/arch/sparc/include/asm/device.h +++ b/arch/sparc/include/asm/device.h @@ -6,18 +6,25 @@ #ifndef _ASM_SPARC_DEVICE_H #define _ASM_SPARC_DEVICE_H +#include <asm/openprom.h> + struct device_node; -struct of_device; +struct platform_device; struct dev_archdata { void *iommu; void *stc; void *host_controller; - struct of_device *op; + struct platform_device *op; int numa_node; }; +extern void of_propagate_archdata(struct platform_device *bus); + struct pdev_archdata { + struct resource resource[PROMREG_MAX]; + unsigned int irqs[PROMINTR_MAX]; + int num_irqs; }; #endif /* _ASM_SPARC_DEVICE_H */ diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h index 8fac3ab22f36..6597ce874d78 100644 --- a/arch/sparc/include/asm/floppy_64.h +++ b/arch/sparc/include/asm/floppy_64.h @@ -43,7 +43,7 @@ struct sun_flpy_controller { /* You'll only ever find one controller on an Ultra anyways. */ static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1; unsigned long fdc_status; -static struct of_device *floppy_op = NULL; +static struct platform_device *floppy_op = NULL; struct sun_floppy_ops { unsigned char (*fd_inb) (unsigned long port); @@ -548,7 +548,7 @@ static unsigned long __init sun_floppy_init(void) { static int initialized = 0; struct device_node *dp; - struct of_device *op; + struct platform_device *op; const char *prop; char state[128]; @@ -567,7 +567,7 @@ static unsigned long __init sun_floppy_init(void) } if (op) { floppy_op = op; - FLOPPY_IRQ = op->irqs[0]; + FLOPPY_IRQ = op->archdata.irqs[0]; } else { struct device_node *ebus_dp; void __iomem *auxio_reg; @@ -593,7 +593,7 @@ static unsigned long __init sun_floppy_init(void) if (state_prop && !strncmp(state_prop, "disabled", 8)) return 0; - FLOPPY_IRQ = op->irqs[0]; + FLOPPY_IRQ = op->archdata.irqs[0]; /* Make sure the high density bit is set, some systems * (most notably Ultra5/Ultra10) come up with it clear. @@ -661,7 +661,7 @@ static unsigned long __init sun_floppy_init(void) config = 0; for (dp = ebus_dp->child; dp; dp = dp->sibling) { if (!strcmp(dp->name, "ecpp")) { - struct of_device *ecpp_op; + struct platform_device *ecpp_op; ecpp_op = of_find_device_by_node(dp); if (ecpp_op) diff --git a/arch/sparc/include/asm/local64.h b/arch/sparc/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/sparc/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h deleted file mode 100644 index f320246a0586..000000000000 --- a/arch/sparc/include/asm/of_device.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _ASM_SPARC_OF_DEVICE_H -#define _ASM_SPARC_OF_DEVICE_H -#ifdef __KERNEL__ - -#include <linux/device.h> -#include <linux/of.h> -#include <linux/mod_devicetable.h> -#include <asm/openprom.h> - -/* - * The of_device is a kind of "base class" that is a superset of - * struct device for use by devices attached to an OF node and - * probed using OF properties. - */ -struct of_device -{ - struct device dev; - struct resource resource[PROMREG_MAX]; - unsigned int irqs[PROMINTR_MAX]; - int num_irqs; - - void *sysdata; - - int slot; - int portid; - int clock_freq; -}; - -extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name); -extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size); - -extern void of_propagate_archdata(struct of_device *bus); - -/* This is just here during the transition */ -#include <linux/of_platform.h> - -#endif /* __KERNEL__ */ -#endif /* _ASM_SPARC_OF_DEVICE_H */ diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h deleted file mode 100644 index 90da99059f83..000000000000 --- a/arch/sparc/include/asm/of_platform.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef ___ASM_SPARC_OF_PLATFORM_H -#define ___ASM_SPARC_OF_PLATFORM_H -/* - * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. - * <benh@kernel.crashing.org> - * Modified for Sparc by merging parts of asm/of_device.h - * by Stephen Rothwell - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#define of_bus_type of_platform_bus_type /* for compatibility */ - -#endif diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h index c333b8d0949b..4f7afa01b2ae 100644 --- a/arch/sparc/include/asm/parport.h +++ b/arch/sparc/include/asm/parport.h @@ -103,7 +103,7 @@ static inline unsigned int get_dma_residue(unsigned int dmanr) return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info); } -static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit ecpp_probe(struct platform_device *op, const struct of_device_id *match) { unsigned long base = op->resource[0].start; unsigned long config = op->resource[1].start; @@ -116,7 +116,7 @@ static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id parent = op->dev.of_node->parent; if (!strcmp(parent->name, "dma")) { p = parport_pc_probe_port(base, base + 0x400, - op->irqs[0], PARPORT_DMA_NOFIFO, + op->archdata.irqs[0], PARPORT_DMA_NOFIFO, op->dev.parent->parent, 0); if (!p) return -ENOMEM; @@ -166,7 +166,7 @@ static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id 0, PTR_LPT_REG_DIR); p = parport_pc_probe_port(base, base + 0x400, - op->irqs[0], + op->archdata.irqs[0], slot, op->dev.parent, 0); @@ -192,7 +192,7 @@ out_err: return err; } -static int __devexit ecpp_remove(struct of_device *op) +static int __devexit ecpp_remove(struct platform_device *op) { struct parport *p = dev_get_drvdata(&op->dev); int slot = p->dma; @@ -243,9 +243,7 @@ static struct of_platform_driver ecpp_driver = { static int parport_pc_find_nonpci_ports(int autoirq, int autodma) { - of_register_driver(&ecpp_driver, &of_bus_type); - - return 0; + return of_register_platform_driver(&ecpp_driver); } #endif /* !(_ASM_SPARC64_PARPORT_H */ diff --git a/arch/sparc/include/asm/perf_event.h b/arch/sparc/include/asm/perf_event.h index 7e2669894ce8..74c4e0cd889c 100644 --- a/arch/sparc/include/asm/perf_event.h +++ b/arch/sparc/include/asm/perf_event.h @@ -6,7 +6,15 @@ extern void set_perf_event_pending(void); #define PERF_EVENT_INDEX_OFFSET 0 #ifdef CONFIG_PERF_EVENTS +#include <asm/ptrace.h> + extern void init_hw_perf_events(void); + +extern void +__perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip); + +#define perf_arch_fetch_caller_regs(pt_regs, ip) \ + __perf_arch_fetch_caller_regs(pt_regs, ip, 1); #else static inline void init_hw_perf_events(void) { } #endif diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h index f845828ca4c6..291f12575edd 100644 --- a/arch/sparc/include/asm/prom.h +++ b/arch/sparc/include/asm/prom.h @@ -43,20 +43,22 @@ extern int of_getintprop_default(struct device_node *np, extern int of_find_in_proplist(const char *list, const char *match, int len); #ifdef CONFIG_NUMA extern int of_node_to_nid(struct device_node *dp); -#else -#define of_node_to_nid(dp) (-1) +#define of_node_to_nid of_node_to_nid #endif extern void prom_build_devicetree(void); extern void of_populate_present_mask(void); extern void of_fill_in_cpu_data(void); +struct resource; +extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name); +extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size); + /* These routines are here to provide compatibility with how powerpc * handles IRQ mapping for OF device nodes. We precompute and permanently - * register them in the of_device objects, whereas powerpc computes them + * register them in the platform_device objects, whereas powerpc computes them * on request. */ -extern unsigned int irq_of_parse_and_map(struct device_node *node, int index); static inline void irq_dispose_mapping(unsigned int virq) { } diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c index b27476caa133..2c0046ecc715 100644 --- a/arch/sparc/kernel/apc.c +++ b/arch/sparc/kernel/apc.c @@ -68,7 +68,7 @@ static void apc_swift_idle(void) #endif } -static inline void apc_free(struct of_device *op) +static inline void apc_free(struct platform_device *op) { of_iounmap(&op->resource[0], regs, resource_size(&op->resource[0])); } @@ -136,7 +136,7 @@ static const struct file_operations apc_fops = { static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops }; -static int __devinit apc_probe(struct of_device *op, +static int __devinit apc_probe(struct platform_device *op, const struct of_device_id *match) { int err; @@ -184,7 +184,7 @@ static struct of_platform_driver apc_driver = { static int __init apc_init(void) { - return of_register_driver(&apc_driver, &of_bus_type); + return of_register_platform_driver(&apc_driver); } /* This driver is not critical to the boot process diff --git a/arch/sparc/kernel/auxio_64.c b/arch/sparc/kernel/auxio_64.c index ddc84128b3c2..3efd3c5af6a9 100644 --- a/arch/sparc/kernel/auxio_64.c +++ b/arch/sparc/kernel/auxio_64.c @@ -102,7 +102,8 @@ static struct of_device_id __initdata auxio_match[] = { MODULE_DEVICE_TABLE(of, auxio_match); -static int __devinit auxio_probe(struct of_device *dev, const struct of_device_id *match) +static int __devinit auxio_probe(struct platform_device *dev, + const struct of_device_id *match) { struct device_node *dp = dev->dev.of_node; unsigned long size; @@ -142,7 +143,7 @@ static struct of_platform_driver auxio_driver = { static int __init auxio_init(void) { - return of_register_driver(&auxio_driver, &of_platform_bus_type); + return of_register_platform_driver(&auxio_driver); } /* Must be after subsys_initcall() so that busses are probed. Must diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c index 434335f65823..cfa2624c5332 100644 --- a/arch/sparc/kernel/central.c +++ b/arch/sparc/kernel/central.c @@ -59,7 +59,7 @@ static int __devinit clock_board_calc_nslots(struct clock_board *p) } } -static int __devinit clock_board_probe(struct of_device *op, +static int __devinit clock_board_probe(struct platform_device *op, const struct of_device_id *match) { struct clock_board *p = kzalloc(sizeof(*p), GFP_KERNEL); @@ -157,7 +157,7 @@ static struct of_platform_driver clock_board_driver = { }, }; -static int __devinit fhc_probe(struct of_device *op, +static int __devinit fhc_probe(struct platform_device *op, const struct of_device_id *match) { struct fhc *p = kzalloc(sizeof(*p), GFP_KERNEL); @@ -265,8 +265,8 @@ static struct of_platform_driver fhc_driver = { static int __init sunfire_init(void) { - (void) of_register_driver(&fhc_driver, &of_platform_bus_type); - (void) of_register_driver(&clock_board_driver, &of_platform_bus_type); + (void) of_register_platform_driver(&fhc_driver); + (void) of_register_platform_driver(&clock_board_driver); return 0; } diff --git a/arch/sparc/kernel/chmc.c b/arch/sparc/kernel/chmc.c index 870cb65b3f21..08c466ebb32b 100644 --- a/arch/sparc/kernel/chmc.c +++ b/arch/sparc/kernel/chmc.c @@ -392,7 +392,7 @@ static void __devinit jbusmc_construct_dimm_groups(struct jbusmc *p, } } -static int __devinit jbusmc_probe(struct of_device *op, +static int __devinit jbusmc_probe(struct platform_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *mem_regs; @@ -690,7 +690,7 @@ static void chmc_fetch_decode_regs(struct chmc *p) chmc_read_mcreg(p, CHMCTRL_DECODE4)); } -static int __devinit chmc_probe(struct of_device *op, +static int __devinit chmc_probe(struct platform_device *op, const struct of_device_id *match) { struct device_node *dp = op->dev.of_node; @@ -765,7 +765,7 @@ out_free: goto out; } -static int __devinit us3mc_probe(struct of_device *op, +static int __devinit us3mc_probe(struct platform_device *op, const struct of_device_id *match) { if (mc_type == MC_TYPE_SAFARI) @@ -775,21 +775,21 @@ static int __devinit us3mc_probe(struct of_device *op, return -ENODEV; } -static void __devexit chmc_destroy(struct of_device *op, struct chmc *p) +static void __devexit chmc_destroy(struct platform_device *op, struct chmc *p) { list_del(&p->list); of_iounmap(&op->resource[0], p->regs, 0x48); kfree(p); } -static void __devexit jbusmc_destroy(struct of_device *op, struct jbusmc *p) +static void __devexit jbusmc_destroy(struct platform_device *op, struct jbusmc *p) { mc_list_del(&p->list); of_iounmap(&op->resource[0], p->regs, JBUSMC_REGS_SIZE); kfree(p); } -static int __devexit us3mc_remove(struct of_device *op) +static int __devexit us3mc_remove(struct platform_device *op) { void *p = dev_get_drvdata(&op->dev); @@ -848,7 +848,7 @@ static int __init us3mc_init(void) ret = register_dimm_printer(us3mc_dimm_printer); if (!ret) { - ret = of_register_driver(&us3mc_driver, &of_bus_type); + ret = of_register_platform_driver(&us3mc_driver); if (ret) unregister_dimm_printer(us3mc_dimm_printer); } @@ -859,7 +859,7 @@ static void __exit us3mc_cleanup(void) { if (us3mc_platform()) { unregister_dimm_printer(us3mc_dimm_printer); - of_unregister_driver(&us3mc_driver); + of_unregister_platform_driver(&us3mc_driver); } } diff --git a/arch/sparc/kernel/helpers.S b/arch/sparc/kernel/helpers.S index 92090cc9e829..682fee06a16b 100644 --- a/arch/sparc/kernel/helpers.S +++ b/arch/sparc/kernel/helpers.S @@ -47,9 +47,9 @@ stack_trace_flush: .size stack_trace_flush,.-stack_trace_flush #ifdef CONFIG_PERF_EVENTS - .globl perf_arch_fetch_caller_regs - .type perf_arch_fetch_caller_regs,#function -perf_arch_fetch_caller_regs: + .globl __perf_arch_fetch_caller_regs + .type __perf_arch_fetch_caller_regs,#function +__perf_arch_fetch_caller_regs: /* We always read the %pstate into %o5 since we will use * that to construct a fake %tstate to store into the regs. */ diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c index 703e4aa9bc38..41f7e4e0f72a 100644 --- a/arch/sparc/kernel/ioport.c +++ b/arch/sparc/kernel/ioport.c @@ -253,7 +253,7 @@ EXPORT_SYMBOL(sbus_set_sbus64); static void *sbus_alloc_coherent(struct device *dev, size_t len, dma_addr_t *dma_addrp, gfp_t gfp) { - struct of_device *op = to_of_device(dev); + struct platform_device *op = to_platform_device(dev); unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK; unsigned long va; struct resource *res; diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c index 47e63f1e719c..2d055a1e9cc2 100644 --- a/arch/sparc/kernel/of_device_32.c +++ b/arch/sparc/kernel/of_device_32.c @@ -241,10 +241,10 @@ static int __init use_1to1_mapping(struct device_node *pp) static int of_resource_verbose; -static void __init build_device_resources(struct of_device *op, +static void __init build_device_resources(struct platform_device *op, struct device *parent) { - struct of_device *p_op; + struct platform_device *p_op; struct of_bus *bus; int na, ns; int index, num_reg; @@ -253,7 +253,7 @@ static void __init build_device_resources(struct of_device *op, if (!parent) return; - p_op = to_of_device(parent); + p_op = to_platform_device(parent); bus = of_match_bus(p_op->dev.of_node); bus->count_cells(op->dev.of_node, &na, &ns); @@ -267,6 +267,8 @@ static void __init build_device_resources(struct of_device *op, /* Conver to num-entries. */ num_reg /= na + ns; + op->resource = op->archdata.resource; + op->num_resources = num_reg; for (index = 0; index < num_reg; index++) { struct resource *r = &op->resource[index]; u32 addr[OF_MAX_ADDR_CELLS]; @@ -333,10 +335,10 @@ static void __init build_device_resources(struct of_device *op, } } -static struct of_device * __init scan_one_device(struct device_node *dp, +static struct platform_device * __init scan_one_device(struct device_node *dp, struct device *parent) { - struct of_device *op = kzalloc(sizeof(*op), GFP_KERNEL); + struct platform_device *op = kzalloc(sizeof(*op), GFP_KERNEL); const struct linux_prom_irqs *intr; struct dev_archdata *sd; int len, i; @@ -349,27 +351,21 @@ static struct of_device * __init scan_one_device(struct device_node *dp, op->dev.of_node = dp; - op->clock_freq = of_getintprop_default(dp, "clock-frequency", - (25*1000*1000)); - op->portid = of_getintprop_default(dp, "upa-portid", -1); - if (op->portid == -1) - op->portid = of_getintprop_default(dp, "portid", -1); - intr = of_get_property(dp, "intr", &len); if (intr) { - op->num_irqs = len / sizeof(struct linux_prom_irqs); - for (i = 0; i < op->num_irqs; i++) - op->irqs[i] = intr[i].pri; + op->archdata.num_irqs = len / sizeof(struct linux_prom_irqs); + for (i = 0; i < op->archdata.num_irqs; i++) + op->archdata.irqs[i] = intr[i].pri; } else { const unsigned int *irq = of_get_property(dp, "interrupts", &len); if (irq) { - op->num_irqs = len / sizeof(unsigned int); - for (i = 0; i < op->num_irqs; i++) - op->irqs[i] = irq[i]; + op->archdata.num_irqs = len / sizeof(unsigned int); + for (i = 0; i < op->archdata.num_irqs; i++) + op->archdata.irqs[i] = irq[i]; } else { - op->num_irqs = 0; + op->archdata.num_irqs = 0; } } if (sparc_cpu_model == sun4d) { @@ -411,8 +407,8 @@ static struct of_device * __init scan_one_device(struct device_node *dp, goto build_resources; } - for (i = 0; i < op->num_irqs; i++) { - int this_irq = op->irqs[i]; + for (i = 0; i < op->archdata.num_irqs; i++) { + int this_irq = op->archdata.irqs[i]; int sbusl = pil_to_sbus[this_irq]; if (sbusl) @@ -420,7 +416,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp, (sbusl << 2) + slot); - op->irqs[i] = this_irq; + op->archdata.irqs[i] = this_irq; } } @@ -428,7 +424,7 @@ build_resources: build_device_resources(op, parent); op->dev.parent = parent; - op->dev.bus = &of_platform_bus_type; + op->dev.bus = &platform_bus_type; if (!parent) dev_set_name(&op->dev, "root"); else @@ -447,7 +443,7 @@ build_resources: static void __init scan_tree(struct device_node *dp, struct device *parent) { while (dp) { - struct of_device *op = scan_one_device(dp, parent); + struct platform_device *op = scan_one_device(dp, parent); if (op) scan_tree(dp->child, &op->dev); @@ -456,30 +452,19 @@ static void __init scan_tree(struct device_node *dp, struct device *parent) } } -static void __init scan_of_devices(void) +static int __init scan_of_devices(void) { struct device_node *root = of_find_node_by_path("/"); - struct of_device *parent; + struct platform_device *parent; parent = scan_one_device(root, NULL); if (!parent) - return; + return 0; scan_tree(root->child, &parent->dev); + return 0; } - -static int __init of_bus_driver_init(void) -{ - int err; - - err = of_bus_type_init(&of_platform_bus_type, "of"); - if (!err) - scan_of_devices(); - - return err; -} - -postcore_initcall(of_bus_driver_init); +postcore_initcall(scan_of_devices); static int __init of_debug(char *str) { diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index 1dae8079f728..63cd4e5d47c2 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -310,10 +310,10 @@ static int __init use_1to1_mapping(struct device_node *pp) static int of_resource_verbose; -static void __init build_device_resources(struct of_device *op, +static void __init build_device_resources(struct platform_device *op, struct device *parent) { - struct of_device *p_op; + struct platform_device *p_op; struct of_bus *bus; int na, ns; int index, num_reg; @@ -322,7 +322,7 @@ static void __init build_device_resources(struct of_device *op, if (!parent) return; - p_op = to_of_device(parent); + p_op = to_platform_device(parent); bus = of_match_bus(p_op->dev.of_node); bus->count_cells(op->dev.of_node, &na, &ns); @@ -344,6 +344,8 @@ static void __init build_device_resources(struct of_device *op, num_reg = PROMREG_MAX; } + op->resource = op->archdata.resource; + op->num_resources = num_reg; for (index = 0; index < num_reg; index++) { struct resource *r = &op->resource[index]; u32 addr[OF_MAX_ADDR_CELLS]; @@ -526,7 +528,7 @@ static unsigned int __init pci_irq_swizzle(struct device_node *dp, static int of_irq_verbose; -static unsigned int __init build_one_device_irq(struct of_device *op, +static unsigned int __init build_one_device_irq(struct platform_device *op, struct device *parent, unsigned int irq) { @@ -628,10 +630,10 @@ out: return irq; } -static struct of_device * __init scan_one_device(struct device_node *dp, +static struct platform_device * __init scan_one_device(struct device_node *dp, struct device *parent) { - struct of_device *op = kzalloc(sizeof(*op), GFP_KERNEL); + struct platform_device *op = kzalloc(sizeof(*op), GFP_KERNEL); const unsigned int *irq; struct dev_archdata *sd; int len, i; @@ -644,34 +646,28 @@ static struct of_device * __init scan_one_device(struct device_node *dp, op->dev.of_node = dp; - op->clock_freq = of_getintprop_default(dp, "clock-frequency", - (25*1000*1000)); - op->portid = of_getintprop_default(dp, "upa-portid", -1); - if (op->portid == -1) - op->portid = of_getintprop_default(dp, "portid", -1); - irq = of_get_property(dp, "interrupts", &len); if (irq) { - op->num_irqs = len / 4; + op->archdata.num_irqs = len / 4; /* Prevent overrunning the op->irqs[] array. */ - if (op->num_irqs > PROMINTR_MAX) { + if (op->archdata.num_irqs > PROMINTR_MAX) { printk(KERN_WARNING "%s: Too many irqs (%d), " "limiting to %d.\n", - dp->full_name, op->num_irqs, PROMINTR_MAX); - op->num_irqs = PROMINTR_MAX; + dp->full_name, op->archdata.num_irqs, PROMINTR_MAX); + op->archdata.num_irqs = PROMINTR_MAX; } - memcpy(op->irqs, irq, op->num_irqs * 4); + memcpy(op->archdata.irqs, irq, op->archdata.num_irqs * 4); } else { - op->num_irqs = 0; + op->archdata.num_irqs = 0; } build_device_resources(op, parent); - for (i = 0; i < op->num_irqs; i++) - op->irqs[i] = build_one_device_irq(op, parent, op->irqs[i]); + for (i = 0; i < op->archdata.num_irqs; i++) + op->archdata.irqs[i] = build_one_device_irq(op, parent, op->archdata.irqs[i]); op->dev.parent = parent; - op->dev.bus = &of_platform_bus_type; + op->dev.bus = &platform_bus_type; if (!parent) dev_set_name(&op->dev, "root"); else @@ -690,7 +686,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp, static void __init scan_tree(struct device_node *dp, struct device *parent) { while (dp) { - struct of_device *op = scan_one_device(dp, parent); + struct platform_device *op = scan_one_device(dp, parent); if (op) scan_tree(dp->child, &op->dev); @@ -699,30 +695,19 @@ static void __init scan_tree(struct device_node *dp, struct device *parent) } } -static void __init scan_of_devices(void) +static int __init scan_of_devices(void) { struct device_node *root = of_find_node_by_path("/"); - struct of_device *parent; + struct platform_device *parent; parent = scan_one_device(root, NULL); if (!parent) - return; + return 0; scan_tree(root->child, &parent->dev); + return 0; } - -static int __init of_bus_driver_init(void) -{ - int err; - - err = of_bus_type_init(&of_platform_bus_type, "of"); - if (!err) - scan_of_devices(); - - return err; -} - -postcore_initcall(of_bus_driver_init); +postcore_initcall(scan_of_devices); static int __init of_debug(char *str) { diff --git a/arch/sparc/kernel/of_device_common.c b/arch/sparc/kernel/of_device_common.c index 10c6c36a6e75..49ddff56cb04 100644 --- a/arch/sparc/kernel/of_device_common.c +++ b/arch/sparc/kernel/of_device_common.c @@ -11,48 +11,28 @@ #include "of_device_common.h" -static int node_match(struct device *dev, void *data) -{ - struct of_device *op = to_of_device(dev); - struct device_node *dp = data; - - return (op->dev.of_node == dp); -} - -struct of_device *of_find_device_by_node(struct device_node *dp) -{ - struct device *dev = bus_find_device(&of_platform_bus_type, NULL, - dp, node_match); - - if (dev) - return to_of_device(dev); - - return NULL; -} -EXPORT_SYMBOL(of_find_device_by_node); - unsigned int irq_of_parse_and_map(struct device_node *node, int index) { - struct of_device *op = of_find_device_by_node(node); + struct platform_device *op = of_find_device_by_node(node); - if (!op || index >= op->num_irqs) + if (!op || index >= op->archdata.num_irqs) return 0; - return op->irqs[index]; + return op->archdata.irqs[index]; } EXPORT_SYMBOL(irq_of_parse_and_map); /* Take the archdata values for IOMMU, STC, and HOSTDATA found in - * BUS and propagate to all child of_device objects. + * BUS and propagate to all child platform_device objects. */ -void of_propagate_archdata(struct of_device *bus) +void of_propagate_archdata(struct platform_device *bus) { struct dev_archdata *bus_sd = &bus->dev.archdata; struct device_node *bus_dp = bus->dev.of_node; struct device_node *dp; for (dp = bus_dp->child; dp; dp = dp->sibling) { - struct of_device *op = of_find_device_by_node(dp); + struct platform_device *op = of_find_device_by_node(dp); op->dev.archdata.iommu = bus_sd->iommu; op->dev.archdata.stc = bus_sd->stc; @@ -64,9 +44,6 @@ void of_propagate_archdata(struct of_device *bus) } } -struct bus_type of_platform_bus_type; -EXPORT_SYMBOL(of_platform_bus_type); - static void get_cells(struct device_node *dp, int *addrc, int *sizec) { if (addrc) diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 8a8363adb8bd..4137579d9adc 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -198,7 +198,7 @@ static unsigned long pci_parse_of_flags(u32 addr0) * into physical address resources, we only have to figure out the register * mapping. */ -static void pci_parse_of_addrs(struct of_device *op, +static void pci_parse_of_addrs(struct platform_device *op, struct device_node *node, struct pci_dev *dev) { @@ -248,7 +248,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, { struct dev_archdata *sd; struct pci_slot *slot; - struct of_device *op; + struct platform_device *op; struct pci_dev *dev; const char *type; u32 class; @@ -340,7 +340,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->hdr_type = PCI_HEADER_TYPE_NORMAL; dev->rom_base_reg = PCI_ROM_ADDRESS; - dev->irq = sd->op->irqs[0]; + dev->irq = sd->op->archdata.irqs[0]; if (dev->irq == 0xffffffff) dev->irq = PCI_IRQ_NONE; } diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c index 51cfa09e392a..efb896d68754 100644 --- a/arch/sparc/kernel/pci_fire.c +++ b/arch/sparc/kernel/pci_fire.c @@ -410,7 +410,7 @@ static void pci_fire_hw_init(struct pci_pbm_info *pbm) } static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, u32 portid) + struct platform_device *op, u32 portid) { const struct linux_prom64_registers *regs; struct device_node *dp = op->dev.of_node; @@ -455,7 +455,7 @@ static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __devinit fire_probe(struct of_device *op, +static int __devinit fire_probe(struct platform_device *op, const struct of_device_id *match) { struct device_node *dp = op->dev.of_node; @@ -518,7 +518,7 @@ static struct of_platform_driver fire_driver = { static int __init fire_init(void) { - return of_register_driver(&fire_driver, &of_bus_type); + return of_register_platform_driver(&fire_driver); } subsys_initcall(fire_init); diff --git a/arch/sparc/kernel/pci_impl.h b/arch/sparc/kernel/pci_impl.h index 03186824327e..e20ed5f06e9c 100644 --- a/arch/sparc/kernel/pci_impl.h +++ b/arch/sparc/kernel/pci_impl.h @@ -91,7 +91,7 @@ struct pci_pbm_info { char *name; /* OBP specific information. */ - struct of_device *op; + struct platform_device *op; u64 ino_bitmap; /* PBM I/O and Memory space resources. */ diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c index 558a70512824..22eab7cf3b11 100644 --- a/arch/sparc/kernel/pci_psycho.c +++ b/arch/sparc/kernel/pci_psycho.c @@ -285,7 +285,7 @@ static irqreturn_t psycho_ce_intr(int irq, void *dev_id) #define PSYCHO_ECCCTRL_CE 0x2000000000000000UL /* Enable CE INterrupts */ static void psycho_register_error_handlers(struct pci_pbm_info *pbm) { - struct of_device *op = of_find_device_by_node(pbm->op->dev.of_node); + struct platform_device *op = of_find_device_by_node(pbm->op->dev.of_node); unsigned long base = pbm->controller_regs; u64 tmp; int err; @@ -302,23 +302,23 @@ static void psycho_register_error_handlers(struct pci_pbm_info *pbm) * 5: POWER MANAGEMENT */ - if (op->num_irqs < 6) + if (op->archdata.num_irqs < 6) return; /* We really mean to ignore the return result here. Two * PCI controller share the same interrupt numbers and * drive the same front-end hardware. */ - err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED, + err = request_irq(op->archdata.irqs[1], psycho_ue_intr, IRQF_SHARED, "PSYCHO_UE", pbm); - err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED, + err = request_irq(op->archdata.irqs[2], psycho_ce_intr, IRQF_SHARED, "PSYCHO_CE", pbm); /* This one, however, ought not to fail. We can just warn * about it since the system can still operate properly even * if this fails. */ - err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED, + err = request_irq(op->archdata.irqs[0], psycho_pcierr_intr, IRQF_SHARED, "PSYCHO_PCIERR", pbm); if (err) printk(KERN_WARNING "%s: Could not register PCIERR, " @@ -483,7 +483,7 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm, #define PSYCHO_MEMSPACE_SIZE 0x07fffffffUL static void __devinit psycho_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, int is_pbm_a) + struct platform_device *op, int is_pbm_a) { psycho_pbm_init_common(pbm, op, "PSYCHO", PBM_CHIP_TYPE_PSYCHO); psycho_pbm_strbuf_init(pbm, is_pbm_a); @@ -503,7 +503,7 @@ static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid) #define PSYCHO_CONFIGSPACE 0x001000000UL -static int __devinit psycho_probe(struct of_device *op, +static int __devinit psycho_probe(struct platform_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *pr_regs; @@ -612,7 +612,7 @@ static struct of_platform_driver psycho_driver = { static int __init psycho_init(void) { - return of_register_driver(&psycho_driver, &of_bus_type); + return of_register_platform_driver(&psycho_driver); } subsys_initcall(psycho_init); diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c index 6dad8e3b7506..5c3f5ec4cabc 100644 --- a/arch/sparc/kernel/pci_sabre.c +++ b/arch/sparc/kernel/pci_sabre.c @@ -311,7 +311,7 @@ static irqreturn_t sabre_ce_intr(int irq, void *dev_id) static void sabre_register_error_handlers(struct pci_pbm_info *pbm) { struct device_node *dp = pbm->op->dev.of_node; - struct of_device *op; + struct platform_device *op; unsigned long base = pbm->controller_regs; u64 tmp; int err; @@ -329,7 +329,7 @@ static void sabre_register_error_handlers(struct pci_pbm_info *pbm) * 2: CE ERR * 3: POWER FAIL */ - if (op->num_irqs < 4) + if (op->archdata.num_irqs < 4) return; /* We clear the error bits in the appropriate AFSR before @@ -341,7 +341,7 @@ static void sabre_register_error_handlers(struct pci_pbm_info *pbm) SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE), base + SABRE_UE_AFSR); - err = request_irq(op->irqs[1], sabre_ue_intr, 0, "SABRE_UE", pbm); + err = request_irq(op->archdata.irqs[1], sabre_ue_intr, 0, "SABRE_UE", pbm); if (err) printk(KERN_WARNING "%s: Couldn't register UE, err=%d.\n", pbm->name, err); @@ -351,11 +351,11 @@ static void sabre_register_error_handlers(struct pci_pbm_info *pbm) base + SABRE_CE_AFSR); - err = request_irq(op->irqs[2], sabre_ce_intr, 0, "SABRE_CE", pbm); + err = request_irq(op->archdata.irqs[2], sabre_ce_intr, 0, "SABRE_CE", pbm); if (err) printk(KERN_WARNING "%s: Couldn't register CE, err=%d.\n", pbm->name, err); - err = request_irq(op->irqs[0], psycho_pcierr_intr, 0, + err = request_irq(op->archdata.irqs[0], psycho_pcierr_intr, 0, "SABRE_PCIERR", pbm); if (err) printk(KERN_WARNING "%s: Couldn't register PCIERR, err=%d.\n", @@ -443,7 +443,7 @@ static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm, } static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op) + struct platform_device *op) { psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE); pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR; @@ -452,7 +452,7 @@ static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm, sabre_scan_bus(pbm, &op->dev); } -static int __devinit sabre_probe(struct of_device *op, +static int __devinit sabre_probe(struct platform_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *pr_regs; @@ -606,7 +606,7 @@ static struct of_platform_driver sabre_driver = { static int __init sabre_init(void) { - return of_register_driver(&sabre_driver, &of_bus_type); + return of_register_platform_driver(&sabre_driver); } subsys_initcall(sabre_init); diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c index 97a1ae2e1c02..445a47a2fb3d 100644 --- a/arch/sparc/kernel/pci_schizo.c +++ b/arch/sparc/kernel/pci_schizo.c @@ -844,7 +844,7 @@ static int pbm_routes_this_ino(struct pci_pbm_info *pbm, u32 ino) */ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm) { - struct of_device *op = of_find_device_by_node(pbm->op->dev.of_node); + struct platform_device *op = of_find_device_by_node(pbm->op->dev.of_node); u64 tmp, err_mask, err_no_mask; int err; @@ -857,14 +857,14 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm) */ if (pbm_routes_this_ino(pbm, SCHIZO_UE_INO)) { - err = request_irq(op->irqs[1], schizo_ue_intr, 0, + err = request_irq(op->archdata.irqs[1], schizo_ue_intr, 0, "TOMATILLO_UE", pbm); if (err) printk(KERN_WARNING "%s: Could not register UE, " "err=%d\n", pbm->name, err); } if (pbm_routes_this_ino(pbm, SCHIZO_CE_INO)) { - err = request_irq(op->irqs[2], schizo_ce_intr, 0, + err = request_irq(op->archdata.irqs[2], schizo_ce_intr, 0, "TOMATILLO_CE", pbm); if (err) printk(KERN_WARNING "%s: Could not register CE, " @@ -872,10 +872,10 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm) } err = 0; if (pbm_routes_this_ino(pbm, SCHIZO_PCIERR_A_INO)) { - err = request_irq(op->irqs[0], schizo_pcierr_intr, 0, + err = request_irq(op->archdata.irqs[0], schizo_pcierr_intr, 0, "TOMATILLO_PCIERR", pbm); } else if (pbm_routes_this_ino(pbm, SCHIZO_PCIERR_B_INO)) { - err = request_irq(op->irqs[0], schizo_pcierr_intr, 0, + err = request_irq(op->archdata.irqs[0], schizo_pcierr_intr, 0, "TOMATILLO_PCIERR", pbm); } if (err) @@ -883,7 +883,7 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm) "err=%d\n", pbm->name, err); if (pbm_routes_this_ino(pbm, SCHIZO_SERR_INO)) { - err = request_irq(op->irqs[3], schizo_safarierr_intr, 0, + err = request_irq(op->archdata.irqs[3], schizo_safarierr_intr, 0, "TOMATILLO_SERR", pbm); if (err) printk(KERN_WARNING "%s: Could not register SERR, " @@ -939,7 +939,7 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm) static void schizo_register_error_handlers(struct pci_pbm_info *pbm) { - struct of_device *op = of_find_device_by_node(pbm->op->dev.of_node); + struct platform_device *op = of_find_device_by_node(pbm->op->dev.of_node); u64 tmp, err_mask, err_no_mask; int err; @@ -952,14 +952,14 @@ static void schizo_register_error_handlers(struct pci_pbm_info *pbm) */ if (pbm_routes_this_ino(pbm, SCHIZO_UE_INO)) { - err = request_irq(op->irqs[1], schizo_ue_intr, 0, + err = request_irq(op->archdata.irqs[1], schizo_ue_intr, 0, "SCHIZO_UE", pbm); if (err) printk(KERN_WARNING "%s: Could not register UE, " "err=%d\n", pbm->name, err); } if (pbm_routes_this_ino(pbm, SCHIZO_CE_INO)) { - err = request_irq(op->irqs[2], schizo_ce_intr, 0, + err = request_irq(op->archdata.irqs[2], schizo_ce_intr, 0, "SCHIZO_CE", pbm); if (err) printk(KERN_WARNING "%s: Could not register CE, " @@ -967,10 +967,10 @@ static void schizo_register_error_handlers(struct pci_pbm_info *pbm) } err = 0; if (pbm_routes_this_ino(pbm, SCHIZO_PCIERR_A_INO)) { - err = request_irq(op->irqs[0], schizo_pcierr_intr, 0, + err = request_irq(op->archdata.irqs[0], schizo_pcierr_intr, 0, "SCHIZO_PCIERR", pbm); } else if (pbm_routes_this_ino(pbm, SCHIZO_PCIERR_B_INO)) { - err = request_irq(op->irqs[0], schizo_pcierr_intr, 0, + err = request_irq(op->archdata.irqs[0], schizo_pcierr_intr, 0, "SCHIZO_PCIERR", pbm); } if (err) @@ -978,7 +978,7 @@ static void schizo_register_error_handlers(struct pci_pbm_info *pbm) "err=%d\n", pbm->name, err); if (pbm_routes_this_ino(pbm, SCHIZO_SERR_INO)) { - err = request_irq(op->irqs[3], schizo_safarierr_intr, 0, + err = request_irq(op->archdata.irqs[3], schizo_safarierr_intr, 0, "SCHIZO_SERR", pbm); if (err) printk(KERN_WARNING "%s: Could not register SERR, " @@ -1307,7 +1307,7 @@ static void schizo_pbm_hw_init(struct pci_pbm_info *pbm) } static int __devinit schizo_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, u32 portid, + struct platform_device *op, u32 portid, int chip_type) { const struct linux_prom64_registers *regs; @@ -1413,7 +1413,7 @@ static struct pci_pbm_info * __devinit schizo_find_sibling(u32 portid, return NULL; } -static int __devinit __schizo_init(struct of_device *op, unsigned long chip_type) +static int __devinit __schizo_init(struct platform_device *op, unsigned long chip_type) { struct device_node *dp = op->dev.of_node; struct pci_pbm_info *pbm; @@ -1460,7 +1460,7 @@ out_err: return err; } -static int __devinit schizo_probe(struct of_device *op, +static int __devinit schizo_probe(struct platform_device *op, const struct of_device_id *match) { return __schizo_init(op, (unsigned long) match->data); @@ -1501,7 +1501,7 @@ static struct of_platform_driver schizo_driver = { static int __init schizo_init(void) { - return of_register_driver(&schizo_driver, &of_bus_type); + return of_register_platform_driver(&schizo_driver); } subsys_initcall(schizo_init); diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index a24af6f7e17f..743344aa6d8a 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -879,7 +879,7 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm) #endif /* !(CONFIG_PCI_MSI) */ static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, u32 devhandle) + struct platform_device *op, u32 devhandle) { struct device_node *dp = op->dev.of_node; int err; @@ -918,7 +918,7 @@ static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm, return 0; } -static int __devinit pci_sun4v_probe(struct of_device *op, +static int __devinit pci_sun4v_probe(struct platform_device *op, const struct of_device_id *match) { const struct linux_prom64_registers *regs; @@ -1019,7 +1019,7 @@ static struct of_platform_driver pci_sun4v_driver = { static int __init pci_sun4v_init(void) { - return of_register_driver(&pci_sun4v_driver, &of_bus_type); + return of_register_platform_driver(&pci_sun4v_driver); } subsys_initcall(pci_sun4v_init); diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 44faabc3c02c..357ced3c33ff 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -572,18 +572,18 @@ static u64 sparc_perf_event_update(struct perf_event *event, s64 delta; again: - prev_raw_count = atomic64_read(&hwc->prev_count); + prev_raw_count = local64_read(&hwc->prev_count); new_raw_count = read_pmc(idx); - if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count, + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, new_raw_count) != prev_raw_count) goto again; delta = (new_raw_count << shift) - (prev_raw_count << shift); delta >>= shift; - atomic64_add(delta, &event->count); - atomic64_sub(delta, &hwc->period_left); + local64_add(delta, &event->count); + local64_sub(delta, &hwc->period_left); return new_raw_count; } @@ -591,27 +591,27 @@ again: static int sparc_perf_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, int idx) { - s64 left = atomic64_read(&hwc->period_left); + s64 left = local64_read(&hwc->period_left); s64 period = hwc->sample_period; int ret = 0; if (unlikely(left <= -period)) { left = period; - atomic64_set(&hwc->period_left, left); + local64_set(&hwc->period_left, left); hwc->last_period = period; ret = 1; } if (unlikely(left <= 0)) { left += period; - atomic64_set(&hwc->period_left, left); + local64_set(&hwc->period_left, left); hwc->last_period = period; ret = 1; } if (left > MAX_PERIOD) left = MAX_PERIOD; - atomic64_set(&hwc->prev_count, (u64)-left); + local64_set(&hwc->prev_count, (u64)-left); write_pmc(idx, (u64)(-left) & 0xffffffff); @@ -1006,7 +1006,7 @@ static int sparc_pmu_enable(struct perf_event *event) * skip the schedulability test here, it will be peformed * at commit time(->commit_txn) as a whole */ - if (cpuc->group_flag & PERF_EVENT_TXN_STARTED) + if (cpuc->group_flag & PERF_EVENT_TXN) goto nocheck; if (check_excludes(cpuc->event, n0, 1)) @@ -1088,7 +1088,7 @@ static int __hw_perf_event_init(struct perf_event *event) if (!hwc->sample_period) { hwc->sample_period = MAX_PERIOD; hwc->last_period = hwc->sample_period; - atomic64_set(&hwc->period_left, hwc->sample_period); + local64_set(&hwc->period_left, hwc->sample_period); } return 0; @@ -1103,7 +1103,7 @@ static void sparc_pmu_start_txn(const struct pmu *pmu) { struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); - cpuhw->group_flag |= PERF_EVENT_TXN_STARTED; + cpuhw->group_flag |= PERF_EVENT_TXN; } /* @@ -1115,7 +1115,7 @@ static void sparc_pmu_cancel_txn(const struct pmu *pmu) { struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); - cpuhw->group_flag &= ~PERF_EVENT_TXN_STARTED; + cpuhw->group_flag &= ~PERF_EVENT_TXN; } /* @@ -1138,6 +1138,7 @@ static int sparc_pmu_commit_txn(const struct pmu *pmu) if (sparc_check_constraints(cpuc->event, cpuc->events, n)) return -EAGAIN; + cpuc->group_flag &= ~PERF_EVENT_TXN; return 0; } diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c index 9589d8b9b0c1..94536a85f161 100644 --- a/arch/sparc/kernel/pmc.c +++ b/arch/sparc/kernel/pmc.c @@ -51,7 +51,7 @@ static void pmc_swift_idle(void) #endif } -static int __devinit pmc_probe(struct of_device *op, +static int __devinit pmc_probe(struct platform_device *op, const struct of_device_id *match) { regs = of_ioremap(&op->resource[0], 0, @@ -89,7 +89,7 @@ static struct of_platform_driver pmc_driver = { static int __init pmc_init(void) { - return of_register_driver(&pmc_driver, &of_bus_type); + return of_register_platform_driver(&pmc_driver); } /* This driver is not critical to the boot process diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c index 168d4cb63f5b..2c59f4d387dd 100644 --- a/arch/sparc/kernel/power.c +++ b/arch/sparc/kernel/power.c @@ -33,10 +33,10 @@ static int __devinit has_button_interrupt(unsigned int irq, struct device_node * return 1; } -static int __devinit power_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit power_probe(struct platform_device *op, const struct of_device_id *match) { struct resource *res = &op->resource[0]; - unsigned int irq= op->irqs[0]; + unsigned int irq = op->archdata.irqs[0]; power_reg = of_ioremap(res, 0, 0x4, "power"); @@ -70,7 +70,7 @@ static struct of_platform_driver power_driver = { static int __init power_init(void) { - return of_register_driver(&power_driver, &of_platform_bus_type); + return of_register_platform_driver(&power_driver); } device_initcall(power_init); diff --git a/arch/sparc/kernel/prom.h b/arch/sparc/kernel/prom.h index a8591ef2636d..eeb04a782ec8 100644 --- a/arch/sparc/kernel/prom.h +++ b/arch/sparc/kernel/prom.h @@ -9,14 +9,6 @@ extern void irq_trans_init(struct device_node *dp); extern unsigned int prom_unique_id; -static inline int is_root_node(const struct device_node *dp) -{ - if (!dp) - return 0; - - return (dp->parent == NULL); -} - extern char *build_path_component(struct device_node *dp); extern void of_console_init(void); diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c index 466a32763ea8..86597d9867fd 100644 --- a/arch/sparc/kernel/prom_64.c +++ b/arch/sparc/kernel/prom_64.c @@ -21,7 +21,7 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/memblock.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <asm/prom.h> #include <asm/oplib.h> @@ -81,7 +81,7 @@ static void __init sun4v_path_component(struct device_node *dp, char *tmp_buf) return; regs = rprop->value; - if (!is_root_node(dp->parent)) { + if (!of_node_is_root(dp->parent)) { sprintf(tmp_buf, "%s@%x,%x", dp->name, (unsigned int) (regs->phys_addr >> 32UL), @@ -121,7 +121,7 @@ static void __init sun4u_path_component(struct device_node *dp, char *tmp_buf) return; regs = prop->value; - if (!is_root_node(dp->parent)) { + if (!of_node_is_root(dp->parent)) { sprintf(tmp_buf, "%s@%x,%x", dp->name, (unsigned int) (regs->phys_addr >> 32UL), diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index 57ac9e28be0c..1f830da2ddf2 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -244,7 +244,7 @@ char * __init build_full_name(struct device_node *dp) n = prom_early_alloc(len); strcpy(n, dp->parent->full_name); - if (!is_root_node(dp->parent)) { + if (!of_node_is_root(dp->parent)) { strcpy(n + plen, "/"); plen++; } diff --git a/arch/sparc/kernel/prom_irqtrans.c b/arch/sparc/kernel/prom_irqtrans.c index 5702ad4710cb..ce651147fabc 100644 --- a/arch/sparc/kernel/prom_irqtrans.c +++ b/arch/sparc/kernel/prom_irqtrans.c @@ -719,7 +719,7 @@ static unsigned int central_build_irq(struct device_node *dp, void *_data) { struct device_node *central_dp = _data; - struct of_device *central_op = of_find_device_by_node(central_dp); + struct platform_device *central_op = of_find_device_by_node(central_dp); struct resource *res; unsigned long imap, iclr; u32 tmp; diff --git a/arch/sparc/kernel/psycho_common.c b/arch/sparc/kernel/psycho_common.c index 3f34ac853931..fe2af66bb198 100644 --- a/arch/sparc/kernel/psycho_common.c +++ b/arch/sparc/kernel/psycho_common.c @@ -447,7 +447,7 @@ int psycho_iommu_init(struct pci_pbm_info *pbm, int tsbsize, } -void psycho_pbm_init_common(struct pci_pbm_info *pbm, struct of_device *op, +void psycho_pbm_init_common(struct pci_pbm_info *pbm, struct platform_device *op, const char *chip_name, int chip_type) { struct device_node *dp = op->dev.of_node; diff --git a/arch/sparc/kernel/psycho_common.h b/arch/sparc/kernel/psycho_common.h index 092c278ef28d..590b4ed8ab5e 100644 --- a/arch/sparc/kernel/psycho_common.h +++ b/arch/sparc/kernel/psycho_common.h @@ -42,7 +42,7 @@ extern int psycho_iommu_init(struct pci_pbm_info *pbm, int tsbsize, unsigned long write_complete_offset); extern void psycho_pbm_init_common(struct pci_pbm_info *pbm, - struct of_device *op, + struct platform_device *op, const char *chip_name, int chip_type); #endif /* _PSYCHO_COMMON_H */ diff --git a/arch/sparc/kernel/sbus.c b/arch/sparc/kernel/sbus.c index cfeaf04b9cdf..2ca32d13abcf 100644 --- a/arch/sparc/kernel/sbus.c +++ b/arch/sparc/kernel/sbus.c @@ -57,7 +57,7 @@ void sbus_set_sbus64(struct device *dev, int bursts) { struct iommu *iommu = dev->archdata.iommu; - struct of_device *op = to_of_device(dev); + struct platform_device *op = to_platform_device(dev); const struct linux_prom_registers *regs; unsigned long cfg_reg; int slot; @@ -204,7 +204,7 @@ static unsigned long sysio_imap_to_iclr(unsigned long imap) return imap + diff; } -static unsigned int sbus_build_irq(struct of_device *op, unsigned int ino) +static unsigned int sbus_build_irq(struct platform_device *op, unsigned int ino) { struct iommu *iommu = op->dev.archdata.iommu; unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; @@ -267,7 +267,7 @@ static unsigned int sbus_build_irq(struct of_device *op, unsigned int ino) #define SYSIO_UEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */ static irqreturn_t sysio_ue_handler(int irq, void *dev_id) { - struct of_device *op = dev_id; + struct platform_device *op = dev_id; struct iommu *iommu = op->dev.archdata.iommu; unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; unsigned long afsr_reg, afar_reg; @@ -341,7 +341,7 @@ static irqreturn_t sysio_ue_handler(int irq, void *dev_id) #define SYSIO_CEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */ static irqreturn_t sysio_ce_handler(int irq, void *dev_id) { - struct of_device *op = dev_id; + struct platform_device *op = dev_id; struct iommu *iommu = op->dev.archdata.iommu; unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; unsigned long afsr_reg, afar_reg; @@ -420,7 +420,7 @@ static irqreturn_t sysio_ce_handler(int irq, void *dev_id) #define SYSIO_SBAFSR_RESV3 0x0000001fffffffffUL /* Reserved */ static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id) { - struct of_device *op = dev_id; + struct platform_device *op = dev_id; struct iommu *iommu = op->dev.archdata.iommu; unsigned long afsr_reg, afar_reg, reg_base; unsigned long afsr, afar, error_bits; @@ -488,7 +488,7 @@ static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id) #define SYSIO_CE_INO 0x35 #define SYSIO_SBUSERR_INO 0x36 -static void __init sysio_register_error_handlers(struct of_device *op) +static void __init sysio_register_error_handlers(struct platform_device *op) { struct iommu *iommu = op->dev.archdata.iommu; unsigned long reg_base = iommu->write_complete_reg - 0x2000UL; @@ -534,7 +534,7 @@ static void __init sysio_register_error_handlers(struct of_device *op) } /* Boot time initialization. */ -static void __init sbus_iommu_init(struct of_device *op) +static void __init sbus_iommu_init(struct platform_device *op) { const struct linux_prom64_registers *pr; struct device_node *dp = op->dev.of_node; @@ -663,7 +663,7 @@ static int __init sbus_init(void) struct device_node *dp; for_each_node_by_name(dp, "sbus") { - struct of_device *op = of_find_device_by_node(dp); + struct platform_device *op = of_find_device_by_node(dp); sbus_iommu_init(op); of_propagate_archdata(op); diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c index e404b063be2c..9c743b1886ff 100644 --- a/arch/sparc/kernel/time_32.c +++ b/arch/sparc/kernel/time_32.c @@ -142,7 +142,7 @@ static struct platform_device m48t59_rtc = { }, }; -static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit clock_probe(struct platform_device *op, const struct of_device_id *match) { struct device_node *dp = op->dev.of_node; const char *model = of_get_property(dp, "model", NULL); @@ -189,7 +189,7 @@ static struct of_platform_driver clock_driver = { /* Probe for the mostek real time clock chip. */ static int __init clock_init(void) { - return of_register_driver(&clock_driver, &of_platform_bus_type); + return of_register_platform_driver(&clock_driver); } /* Must be after subsys_initcall() so that busses are probed. Must * be before device_initcall() because things like the RTC driver diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c index 21e9fcae0668..3bc9c9979b92 100644 --- a/arch/sparc/kernel/time_64.c +++ b/arch/sparc/kernel/time_64.c @@ -419,7 +419,7 @@ static struct platform_device rtc_cmos_device = { .num_resources = 1, }; -static int __devinit rtc_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit rtc_probe(struct platform_device *op, const struct of_device_id *match) { struct resource *r; @@ -477,7 +477,7 @@ static struct platform_device rtc_bq4802_device = { .num_resources = 1, }; -static int __devinit bq4802_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit bq4802_probe(struct platform_device *op, const struct of_device_id *match) { printk(KERN_INFO "%s: BQ4802 regs at 0x%llx\n", @@ -534,7 +534,7 @@ static struct platform_device m48t59_rtc = { }, }; -static int __devinit mostek_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit mostek_probe(struct platform_device *op, const struct of_device_id *match) { struct device_node *dp = op->dev.of_node; @@ -586,9 +586,9 @@ static int __init clock_init(void) if (tlb_type == hypervisor) return platform_device_register(&rtc_sun4v_device); - (void) of_register_driver(&rtc_driver, &of_platform_bus_type); - (void) of_register_driver(&mostek_driver, &of_platform_bus_type); - (void) of_register_driver(&bq4802_driver, &of_platform_bus_type); + (void) of_register_platform_driver(&rtc_driver); + (void) of_register_platform_driver(&mostek_driver); + (void) of_register_platform_driver(&bq4802_driver); return 0; } diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c index 005e758a4db7..fc58c3e917df 100644 --- a/arch/sparc/mm/io-unit.c +++ b/arch/sparc/mm/io-unit.c @@ -35,7 +35,7 @@ #define IOPERM (IOUPTE_CACHE | IOUPTE_WRITE | IOUPTE_VALID) #define MKIOPTE(phys) __iopte((((phys)>>4) & IOUPTE_PAGE) | IOPERM) -static void __init iounit_iommu_init(struct of_device *op) +static void __init iounit_iommu_init(struct platform_device *op) { struct iounit_struct *iounit; iopte_t *xpt, *xptend; @@ -74,7 +74,7 @@ static int __init iounit_init(void) struct device_node *dp; for_each_node_by_name(dp, "sbi") { - struct of_device *op = of_find_device_by_node(dp); + struct platform_device *op = of_find_device_by_node(dp); iounit_iommu_init(op); of_propagate_archdata(op); diff --git a/arch/sparc/mm/iommu.c b/arch/sparc/mm/iommu.c index 0e8ae298b3c3..07fc6a65d9b6 100644 --- a/arch/sparc/mm/iommu.c +++ b/arch/sparc/mm/iommu.c @@ -56,7 +56,7 @@ static pgprot_t dvma_prot; /* Consistent mapping pte flags */ #define IOPERM (IOPTE_CACHE | IOPTE_WRITE | IOPTE_VALID) #define MKIOPTE(pfn, perm) (((((pfn)<<8) & IOPTE_PAGE) | (perm)) & ~IOPTE_WAZ) -static void __init sbus_iommu_init(struct of_device *op) +static void __init sbus_iommu_init(struct platform_device *op) { struct iommu_struct *iommu; unsigned int impl, vers; @@ -132,7 +132,7 @@ static int __init iommu_init(void) struct device_node *dp; for_each_node_by_name(dp, "iommu") { - struct of_device *op = of_find_device_by_node(dp); + struct platform_device *op = of_find_device_by_node(dp); sbus_iommu_init(op); of_propagate_archdata(op); diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common index 0d207e73a758..7c8e277f6d34 100644 --- a/arch/um/Kconfig.common +++ b/arch/um/Kconfig.common @@ -55,10 +55,6 @@ config GENERIC_BUG default y depends on BUG -config GENERIC_TIME - bool - default y - config GENERIC_CLOCKEVENTS bool default y diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c index ae42695c3597..68142df76608 100644 --- a/arch/um/drivers/hostaudio_kern.c +++ b/arch/um/drivers/hostaudio_kern.c @@ -8,6 +8,7 @@ #include "linux/slab.h" #include "linux/sound.h" #include "linux/soundcard.h" +#include "linux/smp_lock.h" #include "asm/uaccess.h" #include "init.h" #include "os.h" @@ -198,7 +199,10 @@ static int hostaudio_open(struct inode *inode, struct file *file) if (file->f_mode & FMODE_WRITE) w = 1; + lock_kernel(); ret = os_open_file(dsp, of_set_rw(OPENFLAGS(), r, w), 0); + unlock_kernel(); + if (ret < 0) { kfree(state); return ret; @@ -254,7 +258,9 @@ static int hostmixer_open_mixdev(struct inode *inode, struct file *file) if (file->f_mode & FMODE_WRITE) w = 1; + lock_kernel(); ret = os_open_file(mixer, of_set_rw(OPENFLAGS(), r, w), 0); + unlock_kernel(); if (ret < 0) { printk(KERN_ERR "hostaudio_open_mixdev failed to open '%s', " diff --git a/arch/um/include/asm/pgtable-3level.h b/arch/um/include/asm/pgtable-3level.h index 084de4a9fc70..0032f9212e74 100644 --- a/arch/um/include/asm/pgtable-3level.h +++ b/arch/um/include/asm/pgtable-3level.h @@ -60,7 +60,7 @@ set_pud(pud, __pud(_PAGE_TABLE + __pa(pmd))) #ifdef CONFIG_64BIT -#define set_pud(pudptr, pudval) set_64bit((phys_t *) (pudptr), pud_val(pudval)) +#define set_pud(pudptr, pudval) set_64bit((u64 *) (pudptr), pud_val(pudval)) #else #define set_pud(pudptr, pudval) (*(pudptr) = (pudval)) #endif @@ -73,7 +73,7 @@ static inline int pgd_newpage(pgd_t pgd) static inline void pgd_mkuptodate(pgd_t pgd) { pgd_val(pgd) &= ~_PAGE_NEWPAGE; } #ifdef CONFIG_64BIT -#define set_pmd(pmdptr, pmdval) set_64bit((phys_t *) (pmdptr), pmd_val(pmdval)) +#define set_pmd(pmdptr, pmdval) set_64bit((u64 *) (pmdptr), pmd_val(pmdval)) #else #define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval)) #endif diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c index c8b9c469fcd7..a08d9fab81f2 100644 --- a/arch/um/kernel/time.c +++ b/arch/um/kernel/time.c @@ -102,16 +102,16 @@ static void __init setup_itimer(void) clockevents_register_device(&itimer_clockevent); } -void __init time_init(void) +void read_persistent_clock(struct timespec *ts) { - long long nsecs; - - timer_init(); + long long nsecs = os_nsecs(); - nsecs = os_nsecs(); - set_normalized_timespec(&wall_to_monotonic, -nsecs / NSEC_PER_SEC, - -nsecs % NSEC_PER_SEC); - set_normalized_timespec(&xtime, nsecs / NSEC_PER_SEC, + set_normalized_timespec(ts, nsecs / NSEC_PER_SEC, nsecs % NSEC_PER_SEC); +} + +void __init time_init(void) +{ + timer_init(); late_time_init = setup_itimer; } diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index dcb0593b4a66..a84fc34c8f77 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -55,6 +55,7 @@ config X86 select HAVE_HW_BREAKPOINT select HAVE_MIXED_BREAKPOINTS_REGS select PERF_EVENTS + select HAVE_PERF_EVENTS_NMI select ANON_INODES select HAVE_ARCH_KMEMCHECK select HAVE_USER_RETURN_NOTIFIER @@ -72,9 +73,6 @@ config ARCH_DEFCONFIG default "arch/x86/configs/i386_defconfig" if X86_32 default "arch/x86/configs/x86_64_defconfig" if X86_64 -config GENERIC_TIME - def_bool y - config GENERIC_CMOS_UPDATE def_bool y @@ -2046,7 +2044,7 @@ config SCx200 config SCx200HR_TIMER tristate "NatSemi SCx200 27MHz High-Resolution Timer Support" - depends on SCx200 && GENERIC_TIME + depends on SCx200 default y ---help--- This driver provides a clocksource built upon the on-chip @@ -2062,6 +2060,15 @@ config OLPC Add support for detecting the unique features of the OLPC XO hardware. +config OLPC_OPENFIRMWARE + bool "Support for OLPC's Open Firmware" + depends on !X86_64 && !X86_PAE + default y if OLPC + help + This option adds support for the implementation of Open Firmware + that is used on the OLPC XO-1 Children's Machine. + If unsure, say N here. + endif # X86_32 config K8_NB diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index ec749c2bfdd7..f7cb086b4add 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -26,10 +26,10 @@ targets := vmlinux.bin setup.bin setup.elf bzImage targets += fdimage fdimage144 fdimage288 image.iso mtools.conf subdir- := compressed -setup-y += a20.o bioscall.o cmdline.o copy.o cpu.o cpucheck.o edd.o -setup-y += header.o main.o mca.o memory.o pm.o pmjump.o -setup-y += printf.o regs.o string.o tty.o video.o video-mode.o -setup-y += version.o +setup-y += a20.o bioscall.o cmdline.o copy.o cpu.o cpucheck.o +setup-y += early_serial_console.o edd.o header.o main.o mca.o memory.o +setup-y += pm.o pmjump.o printf.o regs.o string.o tty.o video.o +setup-y += video-mode.o version.o setup-$(CONFIG_X86_APM_BOOT) += apm.o # The link order of the video-*.o modules can matter. In particular, diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h index 98239d2658f2..c7093bd9f2d3 100644 --- a/arch/x86/boot/boot.h +++ b/arch/x86/boot/boot.h @@ -28,6 +28,7 @@ #include "bitops.h" #include <asm/cpufeature.h> #include <asm/processor-flags.h> +#include "ctype.h" /* Useful macros */ #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) @@ -37,6 +38,8 @@ extern struct setup_header hdr; extern struct boot_params boot_params; +#define cpu_relax() asm volatile("rep; nop") + /* Basic port I/O */ static inline void outb(u8 v, u16 port) { @@ -198,11 +201,6 @@ static inline int memcmp_gs(const void *s1, addr_t s2, size_t len) return diff; } -static inline int isdigit(int ch) -{ - return (ch >= '0') && (ch <= '9'); -} - /* Heap -- available for dynamic lists. */ extern char _end[]; extern char *HEAP; @@ -287,8 +285,18 @@ struct biosregs { void intcall(u8 int_no, const struct biosregs *ireg, struct biosregs *oreg); /* cmdline.c */ -int cmdline_find_option(const char *option, char *buffer, int bufsize); -int cmdline_find_option_bool(const char *option); +int __cmdline_find_option(u32 cmdline_ptr, const char *option, char *buffer, int bufsize); +int __cmdline_find_option_bool(u32 cmdline_ptr, const char *option); +static inline int cmdline_find_option(const char *option, char *buffer, int bufsize) +{ + return __cmdline_find_option(boot_params.hdr.cmd_line_ptr, option, buffer, bufsize); +} + +static inline int cmdline_find_option_bool(const char *option) +{ + return __cmdline_find_option_bool(boot_params.hdr.cmd_line_ptr, option); +} + /* cpu.c, cpucheck.c */ struct cpu_features { @@ -300,6 +308,10 @@ extern struct cpu_features cpu; int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr); int validate_cpu(void); +/* early_serial_console.c */ +extern int early_serial_base; +void console_init(void); + /* edd.c */ void query_edd(void); @@ -329,8 +341,10 @@ void initregs(struct biosregs *regs); /* string.c */ int strcmp(const char *str1, const char *str2); +int strncmp(const char *cs, const char *ct, size_t count); size_t strnlen(const char *s, size_t maxlen); unsigned int atou(const char *s); +unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base); /* tty.c */ void puts(const char *); diff --git a/arch/x86/boot/cmdline.c b/arch/x86/boot/cmdline.c index a1d35634bce0..6b3b6f708c04 100644 --- a/arch/x86/boot/cmdline.c +++ b/arch/x86/boot/cmdline.c @@ -27,9 +27,8 @@ static inline int myisspace(u8 c) * Returns the length of the argument (regardless of if it was * truncated to fit in the buffer), or -1 on not found. */ -int cmdline_find_option(const char *option, char *buffer, int bufsize) +int __cmdline_find_option(u32 cmdline_ptr, const char *option, char *buffer, int bufsize) { - u32 cmdline_ptr = boot_params.hdr.cmd_line_ptr; addr_t cptr; char c; int len = -1; @@ -100,9 +99,8 @@ int cmdline_find_option(const char *option, char *buffer, int bufsize) * Returns the position of that option (starts counting with 1) * or 0 on not found */ -int cmdline_find_option_bool(const char *option) +int __cmdline_find_option_bool(u32 cmdline_ptr, const char *option) { - u32 cmdline_ptr = boot_params.hdr.cmd_line_ptr; addr_t cptr; char c; int pos = 0, wstart = 0; diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index fbb47daf2459..0c229551eead 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -4,7 +4,7 @@ # create a compressed vmlinux image from the original vmlinux # -targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o piggy.o +targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC @@ -23,7 +23,7 @@ LDFLAGS_vmlinux := -T hostprogs-y := mkpiggy -$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/string.o $(obj)/cmdline.o $(obj)/early_serial_console.o $(obj)/piggy.o FORCE $(call if_changed,ld) @: diff --git a/arch/x86/boot/compressed/cmdline.c b/arch/x86/boot/compressed/cmdline.c new file mode 100644 index 000000000000..cb62f786990d --- /dev/null +++ b/arch/x86/boot/compressed/cmdline.c @@ -0,0 +1,21 @@ +#include "misc.h" + +static unsigned long fs; +static inline void set_fs(unsigned long seg) +{ + fs = seg << 4; /* shift it back */ +} +typedef unsigned long addr_t; +static inline char rdfs8(addr_t addr) +{ + return *((char *)(fs + addr)); +} +#include "../cmdline.c" +int cmdline_find_option(const char *option, char *buffer, int bufsize) +{ + return __cmdline_find_option(real_mode->hdr.cmd_line_ptr, option, buffer, bufsize); +} +int cmdline_find_option_bool(const char *option) +{ + return __cmdline_find_option_bool(real_mode->hdr.cmd_line_ptr, option); +} diff --git a/arch/x86/boot/compressed/early_serial_console.c b/arch/x86/boot/compressed/early_serial_console.c new file mode 100644 index 000000000000..261e81fb9582 --- /dev/null +++ b/arch/x86/boot/compressed/early_serial_console.c @@ -0,0 +1,5 @@ +#include "misc.h" + +int early_serial_base; + +#include "../early_serial_console.c" diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index f543b70ffae2..67a655a39ce4 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -124,6 +124,19 @@ relocated: rep stosl /* + * Adjust our own GOT + */ + leal _got(%ebx), %edx + leal _egot(%ebx), %ecx +1: + cmpl %ecx, %edx + jae 2f + addl %ebx, (%edx) + addl $4, %edx + jmp 1b +2: + +/* * Do the decompression, and jump to the new kernel.. */ leal z_extract_offset_negative(%ebx), %ebp diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index faff0dc9c06a..52f85a196fa0 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -280,6 +280,19 @@ relocated: rep stosq /* + * Adjust our own GOT + */ + leaq _got(%rip), %rdx + leaq _egot(%rip), %rcx +1: + cmpq %rcx, %rdx + jae 2f + addq %rbx, (%rdx) + addq $8, %rdx + jmp 1b +2: + +/* * Do the decompression, and jump to the new kernel.. */ pushq %rsi /* Save the real mode argument */ diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 51e240779a44..8f7bef8e9fff 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -9,23 +9,7 @@ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ -/* - * we have to be careful, because no indirections are allowed here, and - * paravirt_ops is a kind of one. As it will only run in baremetal anyway, - * we just keep it from happening - */ -#undef CONFIG_PARAVIRT -#ifdef CONFIG_X86_32 -#define _ASM_X86_DESC_H 1 -#endif - -#include <linux/linkage.h> -#include <linux/screen_info.h> -#include <linux/elf.h> -#include <linux/io.h> -#include <asm/page.h> -#include <asm/boot.h> -#include <asm/bootparam.h> +#include "misc.h" /* WARNING!! * This code is compiled with -fPIC and it is relocated dynamically @@ -123,15 +107,13 @@ static void error(char *m); /* * This is set up by the setup-routine at boot-time */ -static struct boot_params *real_mode; /* Pointer to real-mode data */ +struct boot_params *real_mode; /* Pointer to real-mode data */ static int quiet; +static int debug; void *memset(void *s, int c, size_t n); void *memcpy(void *dest, const void *src, size_t n); -static void __putstr(int, const char *); -#define putstr(__x) __putstr(0, __x) - #ifdef CONFIG_X86_64 #define memptr long #else @@ -170,7 +152,21 @@ static void scroll(void) vidmem[i] = ' '; } -static void __putstr(int error, const char *s) +#define XMTRDY 0x20 + +#define TXR 0 /* Transmit register (WRITE) */ +#define LSR 5 /* Line Status */ +static void serial_putchar(int ch) +{ + unsigned timeout = 0xffff; + + while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) + cpu_relax(); + + outb(ch, early_serial_base + TXR); +} + +void __putstr(int error, const char *s) { int x, y, pos; char c; @@ -179,6 +175,14 @@ static void __putstr(int error, const char *s) if (!error) return; #endif + if (early_serial_base) { + const char *str = s; + while (*str) { + if (*str == '\n') + serial_putchar('\r'); + serial_putchar(*str++); + } + } if (real_mode->screen_info.orig_video_mode == 0 && lines == 0 && cols == 0) @@ -305,8 +309,10 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, { real_mode = rmode; - if (real_mode->hdr.loadflags & QUIET_FLAG) + if (cmdline_find_option_bool("quiet")) quiet = 1; + if (cmdline_find_option_bool("debug")) + debug = 1; if (real_mode->screen_info.orig_video_mode == 7) { vidmem = (char *) 0xb0000; @@ -319,6 +325,10 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, lines = real_mode->screen_info.orig_video_lines; cols = real_mode->screen_info.orig_video_cols; + console_init(); + if (debug) + putstr("early console in decompress_kernel\n"); + free_mem_ptr = heap; /* Heap */ free_mem_end_ptr = heap + BOOT_HEAP_SIZE; diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h new file mode 100644 index 000000000000..3f19c81a6203 --- /dev/null +++ b/arch/x86/boot/compressed/misc.h @@ -0,0 +1,39 @@ +#ifndef BOOT_COMPRESSED_MISC_H +#define BOOT_COMPRESSED_MISC_H + +/* + * we have to be careful, because no indirections are allowed here, and + * paravirt_ops is a kind of one. As it will only run in baremetal anyway, + * we just keep it from happening + */ +#undef CONFIG_PARAVIRT +#ifdef CONFIG_X86_32 +#define _ASM_X86_DESC_H 1 +#endif + +#include <linux/linkage.h> +#include <linux/screen_info.h> +#include <linux/elf.h> +#include <linux/io.h> +#include <asm/page.h> +#include <asm/boot.h> +#include <asm/bootparam.h> + +#define BOOT_BOOT_H +#include "../ctype.h" + +/* misc.c */ +extern struct boot_params *real_mode; /* Pointer to real-mode data */ +void __putstr(int error, const char *s); +#define putstr(__x) __putstr(0, __x) +#define puts(__x) __putstr(0, __x) + +/* cmdline.c */ +int cmdline_find_option(const char *option, char *buffer, int bufsize); +int cmdline_find_option_bool(const char *option); + +/* early_serial_console.c */ +extern int early_serial_base; +void console_init(void); + +#endif diff --git a/arch/x86/boot/compressed/string.c b/arch/x86/boot/compressed/string.c new file mode 100644 index 000000000000..19b3e693cd72 --- /dev/null +++ b/arch/x86/boot/compressed/string.c @@ -0,0 +1,2 @@ +#include "misc.h" +#include "../string.c" diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S index 5ddabceee124..34d047c98284 100644 --- a/arch/x86/boot/compressed/vmlinux.lds.S +++ b/arch/x86/boot/compressed/vmlinux.lds.S @@ -41,6 +41,12 @@ SECTIONS *(.rodata.*) _erodata = . ; } + .got : { + _got = .; + KEEP(*(.got.plt)) + KEEP(*(.got)) + _egot = .; + } .data : { _data = . ; *(.data) diff --git a/arch/x86/boot/ctype.h b/arch/x86/boot/ctype.h new file mode 100644 index 000000000000..25e13403193c --- /dev/null +++ b/arch/x86/boot/ctype.h @@ -0,0 +1,21 @@ +#ifndef BOOT_ISDIGIT_H + +#define BOOT_ISDIGIT_H + +static inline int isdigit(int ch) +{ + return (ch >= '0') && (ch <= '9'); +} + +static inline int isxdigit(int ch) +{ + if (isdigit(ch)) + return true; + + if ((ch >= 'a') && (ch <= 'f')) + return true; + + return (ch >= 'A') && (ch <= 'F'); +} + +#endif diff --git a/arch/x86/boot/early_serial_console.c b/arch/x86/boot/early_serial_console.c new file mode 100644 index 000000000000..030f4b93e255 --- /dev/null +++ b/arch/x86/boot/early_serial_console.c @@ -0,0 +1,139 @@ +#include "boot.h" + +#define DEFAULT_SERIAL_PORT 0x3f8 /* ttyS0 */ + +#define XMTRDY 0x20 + +#define DLAB 0x80 + +#define TXR 0 /* Transmit register (WRITE) */ +#define RXR 0 /* Receive register (READ) */ +#define IER 1 /* Interrupt Enable */ +#define IIR 2 /* Interrupt ID */ +#define FCR 2 /* FIFO control */ +#define LCR 3 /* Line control */ +#define MCR 4 /* Modem control */ +#define LSR 5 /* Line Status */ +#define MSR 6 /* Modem Status */ +#define DLL 0 /* Divisor Latch Low */ +#define DLH 1 /* Divisor latch High */ + +#define DEFAULT_BAUD 9600 + +static void early_serial_init(int port, int baud) +{ + unsigned char c; + unsigned divisor; + + outb(0x3, port + LCR); /* 8n1 */ + outb(0, port + IER); /* no interrupt */ + outb(0, port + FCR); /* no fifo */ + outb(0x3, port + MCR); /* DTR + RTS */ + + divisor = 115200 / baud; + c = inb(port + LCR); + outb(c | DLAB, port + LCR); + outb(divisor & 0xff, port + DLL); + outb((divisor >> 8) & 0xff, port + DLH); + outb(c & ~DLAB, port + LCR); + + early_serial_base = port; +} + +static void parse_earlyprintk(void) +{ + int baud = DEFAULT_BAUD; + char arg[32]; + int pos = 0; + int port = 0; + + if (cmdline_find_option("earlyprintk", arg, sizeof arg) > 0) { + char *e; + + if (!strncmp(arg, "serial", 6)) { + port = DEFAULT_SERIAL_PORT; + pos += 6; + } + + if (arg[pos] == ',') + pos++; + + if (!strncmp(arg, "ttyS", 4)) { + static const int bases[] = { 0x3f8, 0x2f8 }; + int idx = 0; + + if (!strncmp(arg + pos, "ttyS", 4)) + pos += 4; + + if (arg[pos++] == '1') + idx = 1; + + port = bases[idx]; + } + + if (arg[pos] == ',') + pos++; + + baud = simple_strtoull(arg + pos, &e, 0); + if (baud == 0 || arg + pos == e) + baud = DEFAULT_BAUD; + } + + if (port) + early_serial_init(port, baud); +} + +#define BASE_BAUD (1843200/16) +static unsigned int probe_baud(int port) +{ + unsigned char lcr, dll, dlh; + unsigned int quot; + + lcr = inb(port + LCR); + outb(lcr | DLAB, port + LCR); + dll = inb(port + DLL); + dlh = inb(port + DLH); + outb(lcr, port + LCR); + quot = (dlh << 8) | dll; + + return BASE_BAUD / quot; +} + +static void parse_console_uart8250(void) +{ + char optstr[64], *options; + int baud = DEFAULT_BAUD; + int port = 0; + + /* + * console=uart8250,io,0x3f8,115200n8 + * need to make sure it is last one console ! + */ + if (cmdline_find_option("console", optstr, sizeof optstr) <= 0) + return; + + options = optstr; + + if (!strncmp(options, "uart8250,io,", 12)) + port = simple_strtoull(options + 12, &options, 0); + else if (!strncmp(options, "uart,io,", 8)) + port = simple_strtoull(options + 8, &options, 0); + else + return; + + if (options && (options[0] == ',')) + baud = simple_strtoull(options + 1, &options, 0); + else + baud = probe_baud(port); + + if (port) + early_serial_init(port, baud); +} + +void console_init(void) +{ + parse_earlyprintk(); + + if (!early_serial_base) + parse_console_uart8250(); +} diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c index 140172b895bd..40358c8905be 100644 --- a/arch/x86/boot/main.c +++ b/arch/x86/boot/main.c @@ -130,6 +130,11 @@ void main(void) /* First, copy the boot header into the "zeropage" */ copy_boot_params(); + /* Initialize the early-boot console */ + console_init(); + if (cmdline_find_option_bool("debug")) + puts("early console in setup code\n"); + /* End of heap check */ init_heap(); @@ -168,10 +173,6 @@ void main(void) /* Set the video mode */ set_video(); - /* Parse command line for 'quiet' and pass it to decompressor. */ - if (cmdline_find_option_bool("quiet")) - boot_params.hdr.loadflags |= QUIET_FLAG; - /* Do the last things and invoke protected mode */ go_to_protected_mode(); } diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c index 50e47cdbdddd..cdac91ca55d3 100644 --- a/arch/x86/boot/printf.c +++ b/arch/x86/boot/printf.c @@ -34,7 +34,7 @@ static int skip_atoi(const char **s) #define SMALL 32 /* Must be 32 == 0x20 */ #define SPECIAL 64 /* 0x */ -#define do_div(n,base) ({ \ +#define __do_div(n, base) ({ \ int __res; \ __res = ((unsigned long) n) % (unsigned) base; \ n = ((unsigned long) n) / (unsigned) base; \ @@ -83,7 +83,7 @@ static char *number(char *str, long num, int base, int size, int precision, tmp[i++] = '0'; else while (num != 0) - tmp[i++] = (digits[do_div(num, base)] | locase); + tmp[i++] = (digits[__do_div(num, base)] | locase); if (i > precision) precision = i; size -= precision; diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c index f94b7a0c2abf..3cbc4058dd26 100644 --- a/arch/x86/boot/string.c +++ b/arch/x86/boot/string.c @@ -30,6 +30,22 @@ int strcmp(const char *str1, const char *str2) return 0; } +int strncmp(const char *cs, const char *ct, size_t count) +{ + unsigned char c1, c2; + + while (count) { + c1 = *cs++; + c2 = *ct++; + if (c1 != c2) + return c1 < c2 ? -1 : 1; + if (!c1) + break; + count--; + } + return 0; +} + size_t strnlen(const char *s, size_t maxlen) { const char *es = s; @@ -48,3 +64,50 @@ unsigned int atou(const char *s) i = i * 10 + (*s++ - '0'); return i; } + +/* Works only for digits and letters, but small and fast */ +#define TOLOWER(x) ((x) | 0x20) + +static unsigned int simple_guess_base(const char *cp) +{ + if (cp[0] == '0') { + if (TOLOWER(cp[1]) == 'x' && isxdigit(cp[2])) + return 16; + else + return 8; + } else { + return 10; + } +} + +/** + * simple_strtoull - convert a string to an unsigned long long + * @cp: The start of the string + * @endp: A pointer to the end of the parsed string will be placed here + * @base: The number base to use + */ + +unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base) +{ + unsigned long long result = 0; + + if (!base) + base = simple_guess_base(cp); + + if (base == 16 && cp[0] == '0' && TOLOWER(cp[1]) == 'x') + cp += 2; + + while (isxdigit(*cp)) { + unsigned int value; + + value = isdigit(*cp) ? *cp - '0' : TOLOWER(*cp) - 'a' + 10; + if (value >= base) + break; + result = result * base + value; + cp++; + } + if (endp) + *endp = (char *)cp; + + return result; +} diff --git a/arch/x86/boot/tty.c b/arch/x86/boot/tty.c index 01ec69c901c7..def2451f46ae 100644 --- a/arch/x86/boot/tty.c +++ b/arch/x86/boot/tty.c @@ -10,23 +10,36 @@ * ----------------------------------------------------------------------- */ /* - * Very simple screen I/O - * XXX: Probably should add very simple serial I/O? + * Very simple screen and serial I/O */ #include "boot.h" +int early_serial_base; + +#define XMTRDY 0x20 + +#define TXR 0 /* Transmit register (WRITE) */ +#define LSR 5 /* Line Status */ + /* * These functions are in .inittext so they can be used to signal * error during initialization. */ -void __attribute__((section(".inittext"))) putchar(int ch) +static void __attribute__((section(".inittext"))) serial_putchar(int ch) { - struct biosregs ireg; + unsigned timeout = 0xffff; - if (ch == '\n') - putchar('\r'); /* \n -> \r\n */ + while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) + cpu_relax(); + + outb(ch, early_serial_base + TXR); +} + +static void __attribute__((section(".inittext"))) bios_putchar(int ch) +{ + struct biosregs ireg; initregs(&ireg); ireg.bx = 0x0007; @@ -36,6 +49,17 @@ void __attribute__((section(".inittext"))) putchar(int ch) intcall(0x10, &ireg, NULL); } +void __attribute__((section(".inittext"))) putchar(int ch) +{ + if (ch == '\n') + putchar('\r'); /* \n -> \r\n */ + + bios_putchar(ch); + + if (early_serial_base != 0) + serial_putchar(ch); +} + void __attribute__((section(".inittext"))) puts(const char *str) { while (*str) @@ -112,3 +136,4 @@ int getchar_timeout(void) return 0; /* Timeout! */ } + diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index d28fad19654a..e3a32431ca1e 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1471,6 +1471,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set +# CONFIG_SENSORS_PKGTEMP is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 6c86acd847a4..4251f8372050 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1456,6 +1456,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set +# CONFIG_SENSORS_PKGTEMP is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index aa2c39d968fc..92091de11113 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -134,7 +134,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate) boot_cpu_data.x86_model <= 0x05 && boot_cpu_data.x86_mask < 0x0A) return 1; - else if (boot_cpu_has(X86_FEATURE_AMDC1E)) + else if (c1e_detected) return 1; else return max_cstate; diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h index 03b6bb5394a0..bc6abb7bc7ee 100644 --- a/arch/x86/include/asm/alternative.h +++ b/arch/x86/include/asm/alternative.h @@ -45,10 +45,9 @@ struct alt_instr { u8 *instr; /* original instruction */ u8 *replacement; - u8 cpuid; /* cpuid bit set for replacement */ + u16 cpuid; /* cpuid bit set for replacement */ u8 instrlen; /* length of original instruction */ u8 replacementlen; /* length of new instruction, <= instrlen */ - u8 pad1; #ifdef CONFIG_X86_64 u32 pad2; #endif @@ -86,9 +85,11 @@ static inline int alternatives_text_reserved(void *start, void *end) _ASM_ALIGN "\n" \ _ASM_PTR "661b\n" /* label */ \ _ASM_PTR "663f\n" /* new instruction */ \ - " .byte " __stringify(feature) "\n" /* feature bit */ \ + " .word " __stringify(feature) "\n" /* feature bit */ \ " .byte 662b-661b\n" /* sourcelen */ \ " .byte 664f-663f\n" /* replacementlen */ \ + ".previous\n" \ + ".section .discard,\"aw\",@progbits\n" \ " .byte 0xff + (664f-663f) - (662b-661b)\n" /* rlen <= slen */ \ ".previous\n" \ ".section .altinstr_replacement, \"ax\"\n" \ diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h index c74a2eebe570..a69b1ac9eaf8 100644 --- a/arch/x86/include/asm/apb_timer.h +++ b/arch/x86/include/asm/apb_timer.h @@ -55,7 +55,6 @@ extern unsigned long apbt_quick_calibrate(void); extern int arch_setup_apbt_irqs(int irq, int trigger, int mask, int cpu); extern void apbt_setup_secondary_clock(void); extern unsigned int boot_cpu_id; -extern int disable_apbt_percpu; extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint); extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr); diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index 6be33d83c716..8e6218550e77 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -70,6 +70,14 @@ struct sys_desc_table { __u8 table[14]; }; +/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */ +struct olpc_ofw_header { + __u32 ofw_magic; /* OFW signature */ + __u32 ofw_version; + __u32 cif_handler; /* callback into OFW */ + __u32 irq_desc_table; +} __attribute__((packed)); + struct efi_info { __u32 efi_loader_signature; __u32 efi_systab; @@ -92,7 +100,8 @@ struct boot_params { __u8 hd0_info[16]; /* obsolete! */ /* 0x080 */ __u8 hd1_info[16]; /* obsolete! */ /* 0x090 */ struct sys_desc_table sys_desc_table; /* 0x0a0 */ - __u8 _pad4[144]; /* 0x0b0 */ + struct olpc_ofw_header olpc_ofw_header; /* 0x0b0 */ + __u8 _pad4[128]; /* 0x0c0 */ struct edid_info edid_info; /* 0x140 */ struct efi_info efi_info; /* 0x1c0 */ __u32 alt_mem_k; /* 0x1e0 */ diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h index 8859e12dd3cf..284a6e8f7ce1 100644 --- a/arch/x86/include/asm/cmpxchg_32.h +++ b/arch/x86/include/asm/cmpxchg_32.h @@ -11,38 +11,42 @@ extern void __xchg_wrong_size(void); /* - * Note: no "lock" prefix even on SMP: xchg always implies lock anyway - * Note 2: xchg has side effect, so that attribute volatile is necessary, - * but generally the primitive is invalid, *ptr is output argument. --ANK + * Note: no "lock" prefix even on SMP: xchg always implies lock anyway. + * Since this is generally used to protect other memory information, we + * use "asm volatile" and "memory" clobbers to prevent gcc from moving + * information around. */ - -struct __xchg_dummy { - unsigned long a[100]; -}; -#define __xg(x) ((struct __xchg_dummy *)(x)) - #define __xchg(x, ptr, size) \ ({ \ __typeof(*(ptr)) __x = (x); \ switch (size) { \ case 1: \ - asm volatile("xchgb %b0,%1" \ - : "=q" (__x) \ - : "m" (*__xg(ptr)), "0" (__x) \ + { \ + volatile u8 *__ptr = (volatile u8 *)(ptr); \ + asm volatile("xchgb %0,%1" \ + : "=q" (__x), "+m" (*__ptr) \ + : "0" (__x) \ : "memory"); \ break; \ + } \ case 2: \ - asm volatile("xchgw %w0,%1" \ - : "=r" (__x) \ - : "m" (*__xg(ptr)), "0" (__x) \ + { \ + volatile u16 *__ptr = (volatile u16 *)(ptr); \ + asm volatile("xchgw %0,%1" \ + : "=r" (__x), "+m" (*__ptr) \ + : "0" (__x) \ : "memory"); \ break; \ + } \ case 4: \ + { \ + volatile u32 *__ptr = (volatile u32 *)(ptr); \ asm volatile("xchgl %0,%1" \ - : "=r" (__x) \ - : "m" (*__xg(ptr)), "0" (__x) \ + : "=r" (__x), "+m" (*__ptr) \ + : "0" (__x) \ : "memory"); \ break; \ + } \ default: \ __xchg_wrong_size(); \ } \ @@ -53,60 +57,33 @@ struct __xchg_dummy { __xchg((v), (ptr), sizeof(*ptr)) /* - * The semantics of XCHGCMP8B are a bit strange, this is why - * there is a loop and the loading of %%eax and %%edx has to - * be inside. This inlines well in most cases, the cached - * cost is around ~38 cycles. (in the future we might want - * to do an SIMD/3DNOW!/MMX/FPU 64-bit store here, but that - * might have an implicit FPU-save as a cost, so it's not - * clear which path to go.) + * CMPXCHG8B only writes to the target if we had the previous + * value in registers, otherwise it acts as a read and gives us the + * "new previous" value. That is why there is a loop. Preloading + * EDX:EAX is a performance optimization: in the common case it means + * we need only one locked operation. * - * cmpxchg8b must be used with the lock prefix here to allow - * the instruction to be executed atomically, see page 3-102 - * of the instruction set reference 24319102.pdf. We need - * the reader side to see the coherent 64bit value. + * A SIMD/3DNOW!/MMX/FPU 64-bit store here would require at the very + * least an FPU save and/or %cr0.ts manipulation. + * + * cmpxchg8b must be used with the lock prefix here to allow the + * instruction to be executed atomically. We need to have the reader + * side to see the coherent 64bit value. */ -static inline void __set_64bit(unsigned long long *ptr, - unsigned int low, unsigned int high) +static inline void set_64bit(volatile u64 *ptr, u64 value) { + u32 low = value; + u32 high = value >> 32; + u64 prev = *ptr; + asm volatile("\n1:\t" - "movl (%0), %%eax\n\t" - "movl 4(%0), %%edx\n\t" - LOCK_PREFIX "cmpxchg8b (%0)\n\t" + LOCK_PREFIX "cmpxchg8b %0\n\t" "jnz 1b" - : /* no outputs */ - : "D"(ptr), - "b"(low), - "c"(high) - : "ax", "dx", "memory"); -} - -static inline void __set_64bit_constant(unsigned long long *ptr, - unsigned long long value) -{ - __set_64bit(ptr, (unsigned int)value, (unsigned int)(value >> 32)); -} - -#define ll_low(x) *(((unsigned int *)&(x)) + 0) -#define ll_high(x) *(((unsigned int *)&(x)) + 1) - -static inline void __set_64bit_var(unsigned long long *ptr, - unsigned long long value) -{ - __set_64bit(ptr, ll_low(value), ll_high(value)); + : "=m" (*ptr), "+A" (prev) + : "b" (low), "c" (high) + : "memory"); } -#define set_64bit(ptr, value) \ - (__builtin_constant_p((value)) \ - ? __set_64bit_constant((ptr), (value)) \ - : __set_64bit_var((ptr), (value))) - -#define _set_64bit(ptr, value) \ - (__builtin_constant_p(value) \ - ? __set_64bit(ptr, (unsigned int)(value), \ - (unsigned int)((value) >> 32)) \ - : __set_64bit(ptr, ll_low((value)), ll_high((value)))) - extern void __cmpxchg_wrong_size(void); /* @@ -121,23 +98,32 @@ extern void __cmpxchg_wrong_size(void); __typeof__(*(ptr)) __new = (new); \ switch (size) { \ case 1: \ - asm volatile(lock "cmpxchgb %b1,%2" \ - : "=a"(__ret) \ - : "q"(__new), "m"(*__xg(ptr)), "0"(__old) \ + { \ + volatile u8 *__ptr = (volatile u8 *)(ptr); \ + asm volatile(lock "cmpxchgb %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "q" (__new), "0" (__old) \ : "memory"); \ break; \ + } \ case 2: \ - asm volatile(lock "cmpxchgw %w1,%2" \ - : "=a"(__ret) \ - : "r"(__new), "m"(*__xg(ptr)), "0"(__old) \ + { \ + volatile u16 *__ptr = (volatile u16 *)(ptr); \ + asm volatile(lock "cmpxchgw %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "r" (__new), "0" (__old) \ : "memory"); \ break; \ + } \ case 4: \ - asm volatile(lock "cmpxchgl %1,%2" \ - : "=a"(__ret) \ - : "r"(__new), "m"(*__xg(ptr)), "0"(__old) \ + { \ + volatile u32 *__ptr = (volatile u32 *)(ptr); \ + asm volatile(lock "cmpxchgl %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "r" (__new), "0" (__old) \ : "memory"); \ break; \ + } \ default: \ __cmpxchg_wrong_size(); \ } \ @@ -175,32 +161,28 @@ extern void __cmpxchg_wrong_size(void); (unsigned long long)(n))) #endif -static inline unsigned long long __cmpxchg64(volatile void *ptr, - unsigned long long old, - unsigned long long new) +static inline u64 __cmpxchg64(volatile u64 *ptr, u64 old, u64 new) { - unsigned long long prev; - asm volatile(LOCK_PREFIX "cmpxchg8b %3" - : "=A"(prev) - : "b"((unsigned long)new), - "c"((unsigned long)(new >> 32)), - "m"(*__xg(ptr)), - "0"(old) + u64 prev; + asm volatile(LOCK_PREFIX "cmpxchg8b %1" + : "=A" (prev), + "+m" (*ptr) + : "b" ((u32)new), + "c" ((u32)(new >> 32)), + "0" (old) : "memory"); return prev; } -static inline unsigned long long __cmpxchg64_local(volatile void *ptr, - unsigned long long old, - unsigned long long new) +static inline u64 __cmpxchg64_local(volatile u64 *ptr, u64 old, u64 new) { - unsigned long long prev; - asm volatile("cmpxchg8b %3" - : "=A"(prev) - : "b"((unsigned long)new), - "c"((unsigned long)(new >> 32)), - "m"(*__xg(ptr)), - "0"(old) + u64 prev; + asm volatile("cmpxchg8b %1" + : "=A" (prev), + "+m" (*ptr) + : "b" ((u32)new), + "c" ((u32)(new >> 32)), + "0" (old) : "memory"); return prev; } @@ -264,8 +246,6 @@ static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old, * to simulate the cmpxchg8b on the 80386 and 80486 CPU. */ -extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64); - #define cmpxchg64(ptr, o, n) \ ({ \ __typeof__(*(ptr)) __ret; \ @@ -283,20 +263,20 @@ extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64); __ret; }) - -#define cmpxchg64_local(ptr, o, n) \ -({ \ - __typeof__(*(ptr)) __ret; \ - if (likely(boot_cpu_data.x86 > 4)) \ - __ret = (__typeof__(*(ptr)))__cmpxchg64_local((ptr), \ - (unsigned long long)(o), \ - (unsigned long long)(n)); \ - else \ - __ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr), \ - (unsigned long long)(o), \ - (unsigned long long)(n)); \ - __ret; \ -}) +#define cmpxchg64_local(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) __ret; \ + __typeof__(*(ptr)) __old = (o); \ + __typeof__(*(ptr)) __new = (n); \ + alternative_io("call cmpxchg8b_emu", \ + "cmpxchg8b (%%esi)" , \ + X86_FEATURE_CX8, \ + "=A" (__ret), \ + "S" ((ptr)), "0" (__old), \ + "b" ((unsigned int)__new), \ + "c" ((unsigned int)(__new>>32)) \ + : "memory"); \ + __ret; }) #endif diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h index 485ae415faec..423ae58aa020 100644 --- a/arch/x86/include/asm/cmpxchg_64.h +++ b/arch/x86/include/asm/cmpxchg_64.h @@ -3,51 +3,60 @@ #include <asm/alternative.h> /* Provides LOCK_PREFIX */ -#define __xg(x) ((volatile long *)(x)) - -static inline void set_64bit(volatile unsigned long *ptr, unsigned long val) +static inline void set_64bit(volatile u64 *ptr, u64 val) { *ptr = val; } -#define _set_64bit set_64bit - extern void __xchg_wrong_size(void); extern void __cmpxchg_wrong_size(void); /* - * Note: no "lock" prefix even on SMP: xchg always implies lock anyway - * Note 2: xchg has side effect, so that attribute volatile is necessary, - * but generally the primitive is invalid, *ptr is output argument. --ANK + * Note: no "lock" prefix even on SMP: xchg always implies lock anyway. + * Since this is generally used to protect other memory information, we + * use "asm volatile" and "memory" clobbers to prevent gcc from moving + * information around. */ #define __xchg(x, ptr, size) \ ({ \ __typeof(*(ptr)) __x = (x); \ switch (size) { \ case 1: \ - asm volatile("xchgb %b0,%1" \ - : "=q" (__x) \ - : "m" (*__xg(ptr)), "0" (__x) \ + { \ + volatile u8 *__ptr = (volatile u8 *)(ptr); \ + asm volatile("xchgb %0,%1" \ + : "=q" (__x), "+m" (*__ptr) \ + : "0" (__x) \ : "memory"); \ break; \ + } \ case 2: \ - asm volatile("xchgw %w0,%1" \ - : "=r" (__x) \ - : "m" (*__xg(ptr)), "0" (__x) \ + { \ + volatile u16 *__ptr = (volatile u16 *)(ptr); \ + asm volatile("xchgw %0,%1" \ + : "=r" (__x), "+m" (*__ptr) \ + : "0" (__x) \ : "memory"); \ break; \ + } \ case 4: \ - asm volatile("xchgl %k0,%1" \ - : "=r" (__x) \ - : "m" (*__xg(ptr)), "0" (__x) \ + { \ + volatile u32 *__ptr = (volatile u32 *)(ptr); \ + asm volatile("xchgl %0,%1" \ + : "=r" (__x), "+m" (*__ptr) \ + : "0" (__x) \ : "memory"); \ break; \ + } \ case 8: \ + { \ + volatile u64 *__ptr = (volatile u64 *)(ptr); \ asm volatile("xchgq %0,%1" \ - : "=r" (__x) \ - : "m" (*__xg(ptr)), "0" (__x) \ + : "=r" (__x), "+m" (*__ptr) \ + : "0" (__x) \ : "memory"); \ break; \ + } \ default: \ __xchg_wrong_size(); \ } \ @@ -71,29 +80,41 @@ extern void __cmpxchg_wrong_size(void); __typeof__(*(ptr)) __new = (new); \ switch (size) { \ case 1: \ - asm volatile(lock "cmpxchgb %b1,%2" \ - : "=a"(__ret) \ - : "q"(__new), "m"(*__xg(ptr)), "0"(__old) \ + { \ + volatile u8 *__ptr = (volatile u8 *)(ptr); \ + asm volatile(lock "cmpxchgb %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "q" (__new), "0" (__old) \ : "memory"); \ break; \ + } \ case 2: \ - asm volatile(lock "cmpxchgw %w1,%2" \ - : "=a"(__ret) \ - : "r"(__new), "m"(*__xg(ptr)), "0"(__old) \ + { \ + volatile u16 *__ptr = (volatile u16 *)(ptr); \ + asm volatile(lock "cmpxchgw %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "r" (__new), "0" (__old) \ : "memory"); \ break; \ + } \ case 4: \ - asm volatile(lock "cmpxchgl %k1,%2" \ - : "=a"(__ret) \ - : "r"(__new), "m"(*__xg(ptr)), "0"(__old) \ + { \ + volatile u32 *__ptr = (volatile u32 *)(ptr); \ + asm volatile(lock "cmpxchgl %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "r" (__new), "0" (__old) \ : "memory"); \ break; \ + } \ case 8: \ - asm volatile(lock "cmpxchgq %1,%2" \ - : "=a"(__ret) \ - : "r"(__new), "m"(*__xg(ptr)), "0"(__old) \ + { \ + volatile u64 *__ptr = (volatile u64 *)(ptr); \ + asm volatile(lock "cmpxchgq %2,%1" \ + : "=a" (__ret), "+m" (*__ptr) \ + : "r" (__new), "0" (__old) \ : "memory"); \ break; \ + } \ default: \ __cmpxchg_wrong_size(); \ } \ diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 468145914389..781a50b29a49 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -6,7 +6,7 @@ #include <asm/required-features.h> -#define NCAPINTS 9 /* N 32-bit words worth of info */ +#define NCAPINTS 10 /* N 32-bit words worth of info */ /* * Note: If the comment begins with a quoted string, that string is used @@ -89,7 +89,7 @@ #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */ #define X86_FEATURE_11AP (3*32+19) /* "" Bad local APIC aka 11AP */ #define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */ -#define X86_FEATURE_AMDC1E (3*32+21) /* AMD C1E detected */ + /* 21 available, was AMD_C1E */ #define X86_FEATURE_XTOPOLOGY (3*32+22) /* cpu topology enum extensions */ #define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */ #define X86_FEATURE_NONSTOP_TSC (3*32+24) /* TSC does not stop in C states */ @@ -124,6 +124,8 @@ #define X86_FEATURE_XSAVE (4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */ #define X86_FEATURE_OSXSAVE (4*32+27) /* "" XSAVE enabled in the OS */ #define X86_FEATURE_AVX (4*32+28) /* Advanced Vector Extensions */ +#define X86_FEATURE_F16C (4*32+29) /* 16-bit fp conversions */ +#define X86_FEATURE_RDRND (4*32+30) /* The RDRAND instruction */ #define X86_FEATURE_HYPERVISOR (4*32+31) /* Running on a hypervisor */ /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */ @@ -157,22 +159,29 @@ /* * Auxiliary flags: Linux defined - For features scattered in various - * CPUID levels like 0x6, 0xA etc + * CPUID levels like 0x6, 0xA etc, word 7 */ #define X86_FEATURE_IDA (7*32+ 0) /* Intel Dynamic Acceleration */ #define X86_FEATURE_ARAT (7*32+ 1) /* Always Running APIC Timer */ #define X86_FEATURE_CPB (7*32+ 2) /* AMD Core Performance Boost */ +#define X86_FEATURE_EPB (7*32+ 3) /* IA32_ENERGY_PERF_BIAS support */ +#define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */ +#define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */ +#define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */ -/* Virtualization flags: Linux defined */ +/* Virtualization flags: Linux defined, word 8 */ #define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */ #define X86_FEATURE_VNMI (8*32+ 1) /* Intel Virtual NMI */ #define X86_FEATURE_FLEXPRIORITY (8*32+ 2) /* Intel FlexPriority */ #define X86_FEATURE_EPT (8*32+ 3) /* Intel Extended Page Table */ #define X86_FEATURE_VPID (8*32+ 4) /* Intel Virtual Processor ID */ -#define X86_FEATURE_NPT (8*32+5) /* AMD Nested Page Table support */ -#define X86_FEATURE_LBRV (8*32+6) /* AMD LBR Virtualization support */ -#define X86_FEATURE_SVML (8*32+7) /* "svm_lock" AMD SVM locking MSR */ -#define X86_FEATURE_NRIPS (8*32+8) /* "nrip_save" AMD SVM next_rip save */ +#define X86_FEATURE_NPT (8*32+ 5) /* AMD Nested Page Table support */ +#define X86_FEATURE_LBRV (8*32+ 6) /* AMD LBR Virtualization support */ +#define X86_FEATURE_SVML (8*32+ 7) /* "svm_lock" AMD SVM locking MSR */ +#define X86_FEATURE_NRIPS (8*32+ 8) /* "nrip_save" AMD SVM next_rip save */ + +/* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */ +#define X86_FEATURE_FSGSBASE (9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/ #if defined(__KERNEL__) && !defined(__ASSEMBLY__) @@ -194,7 +203,9 @@ extern const char * const x86_power_flags[32]; (((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) || \ (((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) || \ (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) || \ - (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) ) \ + (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) || \ + (((bit)>>5)==8 && (1UL<<((bit)&31) & REQUIRED_MASK8)) || \ + (((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) ) \ ? 1 : \ test_cpu_cap(c, bit)) @@ -291,7 +302,7 @@ extern const char * const x86_power_flags[32]; * patch the target code for additional performance. * */ -static __always_inline __pure bool __static_cpu_has(u8 bit) +static __always_inline __pure bool __static_cpu_has(u16 bit) { #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) asm goto("1: jmp %l[t_no]\n" @@ -300,11 +311,11 @@ static __always_inline __pure bool __static_cpu_has(u8 bit) _ASM_ALIGN "\n" _ASM_PTR "1b\n" _ASM_PTR "0\n" /* no replacement */ - " .byte %P0\n" /* feature bit */ + " .word %P0\n" /* feature bit */ " .byte 2b - 1b\n" /* source len */ " .byte 0\n" /* replacement len */ - " .byte 0xff + 0 - (2b-1b)\n" /* padding */ ".previous\n" + /* skipping size check since replacement size = 0 */ : : "i" (bit) : : t_no); return true; t_no: @@ -318,10 +329,12 @@ static __always_inline __pure bool __static_cpu_has(u8 bit) _ASM_ALIGN "\n" _ASM_PTR "1b\n" _ASM_PTR "3f\n" - " .byte %P1\n" /* feature bit */ + " .word %P1\n" /* feature bit */ " .byte 2b - 1b\n" /* source len */ " .byte 4f - 3f\n" /* replacement len */ - " .byte 0xff + (4f-3f) - (2b-1b)\n" /* padding */ + ".previous\n" + ".section .discard,\"aw\",@progbits\n" + " .byte 0xff + (4f-3f) - (2b-1b)\n" /* size check */ ".previous\n" ".section .altinstr_replacement,\"ax\"\n" "3: movb $1,%0\n" @@ -337,7 +350,7 @@ static __always_inline __pure bool __static_cpu_has(u8 bit) ( \ __builtin_constant_p(boot_cpu_has(bit)) ? \ boot_cpu_has(bit) : \ - (__builtin_constant_p(bit) && !((bit) & ~0xff)) ? \ + __builtin_constant_p(bit) ? \ __static_cpu_has(bit) : \ boot_cpu_has(bit) \ ) diff --git a/arch/x86/include/asm/hw_breakpoint.h b/arch/x86/include/asm/hw_breakpoint.h index 942255310e6a..528a11e8d3e3 100644 --- a/arch/x86/include/asm/hw_breakpoint.h +++ b/arch/x86/include/asm/hw_breakpoint.h @@ -20,10 +20,10 @@ struct arch_hw_breakpoint { #include <linux/list.h> /* Available HW breakpoint length encodings */ +#define X86_BREAKPOINT_LEN_X 0x00 #define X86_BREAKPOINT_LEN_1 0x40 #define X86_BREAKPOINT_LEN_2 0x44 #define X86_BREAKPOINT_LEN_4 0x4c -#define X86_BREAKPOINT_LEN_EXECUTE 0x40 #ifdef CONFIG_X86_64 #define X86_BREAKPOINT_LEN_8 0x48 diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h index 70abda7058c8..ff2546ce7178 100644 --- a/arch/x86/include/asm/hypervisor.h +++ b/arch/x86/include/asm/hypervisor.h @@ -45,5 +45,6 @@ extern const struct hypervisor_x86 *x86_hyper; /* Recognized hypervisors */ extern const struct hypervisor_x86 x86_hyper_vmware; extern const struct hypervisor_x86 x86_hyper_ms_hyperv; +extern const struct hypervisor_x86 x86_hyper_xen_hvm; #endif diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index 815c5b2b9f57..a73a8d5a5e69 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -31,7 +31,6 @@ extern void mxcsr_feature_mask_init(void); extern int init_fpu(struct task_struct *child); extern asmlinkage void math_state_restore(void); extern void __math_state_restore(void); -extern void init_thread_xstate(void); extern int dump_fpu(struct pt_regs *, struct user_i387_struct *); extern user_regset_active_fn fpregs_active, xfpregs_active; @@ -58,11 +57,25 @@ extern int restore_i387_xstate_ia32(void __user *buf); #define X87_FSW_ES (1 << 7) /* Exception Summary */ +static __always_inline __pure bool use_xsaveopt(void) +{ + return static_cpu_has(X86_FEATURE_XSAVEOPT); +} + static __always_inline __pure bool use_xsave(void) { return static_cpu_has(X86_FEATURE_XSAVE); } +extern void __sanitize_i387_state(struct task_struct *); + +static inline void sanitize_i387_state(struct task_struct *tsk) +{ + if (!use_xsaveopt()) + return; + __sanitize_i387_state(tsk); +} + #ifdef CONFIG_X86_64 /* Ignore delayed exceptions from user space */ @@ -127,6 +140,15 @@ static inline int fxsave_user(struct i387_fxsave_struct __user *fx) { int err; + /* + * Clear the bytes not touched by the fxsave and reserved + * for the SW usage. + */ + err = __clear_user(&fx->sw_reserved, + sizeof(struct _fpx_sw_bytes)); + if (unlikely(err)) + return -EFAULT; + asm volatile("1: rex64/fxsave (%[fx])\n\t" "2:\n" ".section .fixup,\"ax\"\n" diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 8767d99c4f64..e2ca30092557 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -125,6 +125,9 @@ */ #define MCE_SELF_VECTOR 0xeb +/* Xen vector callback to receive events in a HVM domain */ +#define XEN_HVM_EVTCHN_CALLBACK 0xe9 + #define NR_VECTORS 256 #define FPU_IRQ 13 diff --git a/arch/x86/include/asm/kgdb.h b/arch/x86/include/asm/kgdb.h index 006da3687cdc..396f5b5fc4d7 100644 --- a/arch/x86/include/asm/kgdb.h +++ b/arch/x86/include/asm/kgdb.h @@ -39,9 +39,11 @@ enum regnames { GDB_FS, /* 14 */ GDB_GS, /* 15 */ }; +#define GDB_ORIG_AX 41 +#define DBG_MAX_REG_NUM 16 #define NUMREGBYTES ((GDB_GS+1)*4) #else /* ! CONFIG_X86_32 */ -enum regnames64 { +enum regnames { GDB_AX, /* 0 */ GDB_BX, /* 1 */ GDB_CX, /* 2 */ @@ -59,15 +61,15 @@ enum regnames64 { GDB_R14, /* 14 */ GDB_R15, /* 15 */ GDB_PC, /* 16 */ + GDB_PS, /* 17 */ + GDB_CS, /* 18 */ + GDB_SS, /* 19 */ }; - -enum regnames32 { - GDB_PS = 34, - GDB_CS, - GDB_SS, -}; -#define NUMREGBYTES ((GDB_SS+1)*4) -#endif /* CONFIG_X86_32 */ +#define GDB_ORIG_AX 57 +#define DBG_MAX_REG_NUM 20 +/* 17 64 bit regs and 3 32 bit regs */ +#define NUMREGBYTES ((17 * 8) + (3 * 4)) +#endif /* ! CONFIG_X86_32 */ static inline void arch_kgdb_breakpoint(void) { diff --git a/arch/x86/include/asm/local64.h b/arch/x86/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/x86/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index f32a4301c4d4..c62c13cb9788 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -38,6 +38,10 @@ #define MCM_ADDR_MEM 3 /* memory address */ #define MCM_ADDR_GENERIC 7 /* generic */ +/* CTL2 register defines */ +#define MCI_CTL2_CMCI_EN (1ULL << 30) +#define MCI_CTL2_CMCI_THRESHOLD_MASK 0x7fffULL + #define MCJ_CTX_MASK 3 #define MCJ_CTX(flags) ((flags) & MCJ_CTX_MASK) #define MCJ_CTX_RANDOM 0 /* inject context: random */ diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h index 451d30e7f62d..16350740edf6 100644 --- a/arch/x86/include/asm/mrst.h +++ b/arch/x86/include/asm/mrst.h @@ -13,6 +13,32 @@ extern int pci_mrst_init(void); int __init sfi_parse_mrtc(struct sfi_table_header *table); +/* + * Medfield is the follow-up of Moorestown, it combines two chip solution into + * one. Other than that it also added always-on and constant tsc and lapic + * timers. Medfield is the platform name, and the chip name is called Penwell + * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be + * identified via MSRs. + */ +enum mrst_cpu_type { + MRST_CPU_CHIP_LINCROFT = 1, + MRST_CPU_CHIP_PENWELL, +}; + +extern enum mrst_cpu_type __mrst_cpu_chip; +static enum mrst_cpu_type mrst_identify_cpu(void) +{ + return __mrst_cpu_chip; +} + +enum mrst_timer_options { + MRST_TIMER_DEFAULT, + MRST_TIMER_APBT_ONLY, + MRST_TIMER_LAPIC_APBT, +}; + +extern enum mrst_timer_options mrst_timer_options; + #define SFI_MTMR_MAX_NUM 8 #define SFI_MRTC_MAX 8 diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 509a42187dc2..986f7790fdb2 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -96,9 +96,6 @@ #define MSR_IA32_MC0_CTL2 0x00000280 #define MSR_IA32_MCx_CTL2(x) (MSR_IA32_MC0_CTL2 + (x)) -#define CMCI_EN (1ULL << 30) -#define CMCI_THRESHOLD_MASK 0xffffULL - #define MSR_P6_PERFCTR0 0x000000c1 #define MSR_P6_PERFCTR1 0x000000c2 #define MSR_P6_EVNTSEL0 0x00000186 @@ -161,8 +158,6 @@ #define MSR_K7_FID_VID_STATUS 0xc0010042 /* K6 MSRs */ -#define MSR_K6_EFER 0xc0000080 -#define MSR_K6_STAR 0xc0000081 #define MSR_K6_WHCR 0xc0000082 #define MSR_K6_UWCCR 0xc0000085 #define MSR_K6_EPMR 0xc0000086 @@ -226,12 +221,14 @@ #define MSR_IA32_THERM_CONTROL 0x0000019a #define MSR_IA32_THERM_INTERRUPT 0x0000019b -#define THERM_INT_LOW_ENABLE (1 << 0) -#define THERM_INT_HIGH_ENABLE (1 << 1) +#define THERM_INT_HIGH_ENABLE (1 << 0) +#define THERM_INT_LOW_ENABLE (1 << 1) +#define THERM_INT_PLN_ENABLE (1 << 24) #define MSR_IA32_THERM_STATUS 0x0000019c #define THERM_STATUS_PROCHOT (1 << 0) +#define THERM_STATUS_POWER_LIMIT (1 << 10) #define MSR_THERM2_CTL 0x0000019d @@ -241,6 +238,19 @@ #define MSR_IA32_TEMPERATURE_TARGET 0x000001a2 +#define MSR_IA32_ENERGY_PERF_BIAS 0x000001b0 + +#define MSR_IA32_PACKAGE_THERM_STATUS 0x000001b1 + +#define PACKAGE_THERM_STATUS_PROCHOT (1 << 0) +#define PACKAGE_THERM_STATUS_POWER_LIMIT (1 << 10) + +#define MSR_IA32_PACKAGE_THERM_INTERRUPT 0x000001b2 + +#define PACKAGE_THERM_INT_HIGH_ENABLE (1 << 0) +#define PACKAGE_THERM_INT_LOW_ENABLE (1 << 1) +#define PACKAGE_THERM_INT_PLN_ENABLE (1 << 24) + /* MISC_ENABLE bits: architectural */ #define MSR_IA32_MISC_ENABLE_FAST_STRING (1ULL << 0) #define MSR_IA32_MISC_ENABLE_TCC (1ULL << 1) diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index c5bc4c2d33f5..084ef95274cd 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -148,8 +148,8 @@ static inline unsigned long long native_read_pmc(int counter) #define rdmsr(msr, val1, val2) \ do { \ u64 __val = native_read_msr((msr)); \ - (val1) = (u32)__val; \ - (val2) = (u32)(__val >> 32); \ + (void)((val1) = (u32)__val); \ + (void)((val2) = (u32)(__val >> 32)); \ } while (0) static inline void wrmsr(unsigned msr, unsigned low, unsigned high) diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h index 93da9c3f3341..932f0f86b4b7 100644 --- a/arch/x86/include/asm/nmi.h +++ b/arch/x86/include/asm/nmi.h @@ -17,7 +17,9 @@ int do_nmi_callback(struct pt_regs *regs, int cpu); extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); extern int check_nmi_watchdog(void); +#if !defined(CONFIG_LOCKUP_DETECTOR) extern int nmi_watchdog_enabled; +#endif extern int avail_to_resrv_perfctr_nmi_bit(unsigned int); extern int reserve_perfctr_nmi(unsigned int); extern void release_perfctr_nmi(unsigned int); diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h new file mode 100644 index 000000000000..08fde475cb3b --- /dev/null +++ b/arch/x86/include/asm/olpc_ofw.h @@ -0,0 +1,31 @@ +#ifndef _ASM_X86_OLPC_OFW_H +#define _ASM_X86_OLPC_OFW_H + +/* index into the page table containing the entry OFW occupies */ +#define OLPC_OFW_PDE_NR 1022 + +#define OLPC_OFW_SIG 0x2057464F /* aka "OFW " */ + +#ifdef CONFIG_OLPC_OPENFIRMWARE + +/* run an OFW command by calling into the firmware */ +#define olpc_ofw(name, args, res) \ + __olpc_ofw((name), ARRAY_SIZE(args), args, ARRAY_SIZE(res), res) + +extern int __olpc_ofw(const char *name, int nr_args, const void **args, int nr_res, + void **res); + +/* determine whether OFW is available and lives in the proper memory */ +extern void olpc_ofw_detect(void); + +/* install OFW's pde permanently into the kernel's pgtable */ +extern void setup_olpc_ofw_pgd(void); + +#else /* !CONFIG_OLPC_OPENFIRMWARE */ + +static inline void olpc_ofw_detect(void) { } +static inline void setup_olpc_ofw_pgd(void) { } + +#endif /* !CONFIG_OLPC_OPENFIRMWARE */ + +#endif /* _ASM_X86_OLPC_OFW_H */ diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index cd2a31dc5fb8..49c7219826f9 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -30,6 +30,7 @@ #define PCI_HAS_IO_ECS 0x40000 #define PCI_NOASSIGN_ROMS 0x80000 #define PCI_ROOT_NO_CRS 0x100000 +#define PCI_NOASSIGN_BARS 0x200000 extern unsigned int pci_probe; extern unsigned long pirq_table_addr; diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index 254883d0c7e0..6e742cc4251b 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -68,8 +68,9 @@ union cpuid10_eax { union cpuid10_edx { struct { - unsigned int num_counters_fixed:4; - unsigned int reserved:28; + unsigned int num_counters_fixed:5; + unsigned int bit_width_fixed:8; + unsigned int reserved:19; } split; unsigned int full; }; @@ -140,6 +141,19 @@ extern unsigned long perf_instruction_pointer(struct pt_regs *regs); extern unsigned long perf_misc_flags(struct pt_regs *regs); #define perf_misc_flags(regs) perf_misc_flags(regs) +#include <asm/stacktrace.h> + +/* + * We abuse bit 3 from flags to pass exact information, see perf_misc_flags + * and the comment with PERF_EFLAGS_EXACT. + */ +#define perf_arch_fetch_caller_regs(regs, __ip) { \ + (regs)->ip = (__ip); \ + (regs)->bp = caller_frame_pointer(); \ + (regs)->cs = __KERNEL_CS; \ + regs->flags = 0; \ +} + #else static inline void init_hw_perf_events(void) { } static inline void perf_events_lapic_init(void) { } diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h index 64a8ebff06fc..def500776b16 100644 --- a/arch/x86/include/asm/perf_event_p4.h +++ b/arch/x86/include/asm/perf_event_p4.h @@ -19,7 +19,6 @@ #define ARCH_P4_RESERVED_ESCR (2) /* IQ_ESCR(0,1) not always present */ #define ARCH_P4_MAX_ESCR (ARCH_P4_TOTAL_ESCR - ARCH_P4_RESERVED_ESCR) #define ARCH_P4_MAX_CCCR (18) -#define ARCH_P4_MAX_COUNTER (ARCH_P4_MAX_CCCR / 2) #define P4_ESCR_EVENT_MASK 0x7e000000U #define P4_ESCR_EVENT_SHIFT 25 @@ -71,10 +70,6 @@ #define P4_CCCR_THRESHOLD(v) ((v) << P4_CCCR_THRESHOLD_SHIFT) #define P4_CCCR_ESEL(v) ((v) << P4_CCCR_ESCR_SELECT_SHIFT) -/* Custom bits in reerved CCCR area */ -#define P4_CCCR_CACHE_OPS_MASK 0x0000003fU - - /* Non HT mask */ #define P4_CCCR_MASK \ (P4_CCCR_OVF | \ @@ -106,8 +101,7 @@ * ESCR and CCCR but rather an only packed value should * be unpacked and written to a proper addresses * - * the base idea is to pack as much info as - * possible + * the base idea is to pack as much info as possible */ #define p4_config_pack_escr(v) (((u64)(v)) << 32) #define p4_config_pack_cccr(v) (((u64)(v)) & 0xffffffffULL) @@ -130,8 +124,6 @@ t; \ }) -#define p4_config_unpack_cache_event(v) (((u64)(v)) & P4_CCCR_CACHE_OPS_MASK) - #define P4_CONFIG_HT_SHIFT 63 #define P4_CONFIG_HT (1ULL << P4_CONFIG_HT_SHIFT) @@ -214,6 +206,12 @@ static inline u32 p4_default_escr_conf(int cpu, int exclude_os, int exclude_usr) return escr; } +/* + * This are the events which should be used in "Event Select" + * field of ESCR register, they are like unique keys which allow + * the kernel to determinate which CCCR and COUNTER should be + * used to track an event + */ enum P4_EVENTS { P4_EVENT_TC_DELIVER_MODE, P4_EVENT_BPU_FETCH_REQUEST, @@ -561,7 +559,7 @@ enum P4_EVENT_OPCODES { * a caller should use P4_ESCR_EMASK_NAME helper to * pick the EventMask needed, for example * - * P4_ESCR_EMASK_NAME(P4_EVENT_TC_DELIVER_MODE, DD) + * P4_ESCR_EMASK_BIT(P4_EVENT_TC_DELIVER_MODE, DD) */ enum P4_ESCR_EMASKS { P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, DD, 0), @@ -753,43 +751,50 @@ enum P4_ESCR_EMASKS { P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_COMPLETED, BOGUS, 1), }; -/* P4 PEBS: stale for a while */ -#define P4_PEBS_METRIC_MASK 0x00001fffU -#define P4_PEBS_UOB_TAG 0x01000000U -#define P4_PEBS_ENABLE 0x02000000U - -/* Replay metrics for MSR_IA32_PEBS_ENABLE and MSR_P4_PEBS_MATRIX_VERT */ -#define P4_PEBS__1stl_cache_load_miss_retired 0x3000001 -#define P4_PEBS__2ndl_cache_load_miss_retired 0x3000002 -#define P4_PEBS__dtlb_load_miss_retired 0x3000004 -#define P4_PEBS__dtlb_store_miss_retired 0x3000004 -#define P4_PEBS__dtlb_all_miss_retired 0x3000004 -#define P4_PEBS__tagged_mispred_branch 0x3018000 -#define P4_PEBS__mob_load_replay_retired 0x3000200 -#define P4_PEBS__split_load_retired 0x3000400 -#define P4_PEBS__split_store_retired 0x3000400 - -#define P4_VERT__1stl_cache_load_miss_retired 0x0000001 -#define P4_VERT__2ndl_cache_load_miss_retired 0x0000001 -#define P4_VERT__dtlb_load_miss_retired 0x0000001 -#define P4_VERT__dtlb_store_miss_retired 0x0000002 -#define P4_VERT__dtlb_all_miss_retired 0x0000003 -#define P4_VERT__tagged_mispred_branch 0x0000010 -#define P4_VERT__mob_load_replay_retired 0x0000001 -#define P4_VERT__split_load_retired 0x0000001 -#define P4_VERT__split_store_retired 0x0000002 - -enum P4_CACHE_EVENTS { - P4_CACHE__NONE, - - P4_CACHE__1stl_cache_load_miss_retired, - P4_CACHE__2ndl_cache_load_miss_retired, - P4_CACHE__dtlb_load_miss_retired, - P4_CACHE__dtlb_store_miss_retired, - P4_CACHE__itlb_reference_hit, - P4_CACHE__itlb_reference_miss, - - P4_CACHE__MAX +/* + * P4 PEBS specifics (Replay Event only) + * + * Format (bits): + * 0-6: metric from P4_PEBS_METRIC enum + * 7 : reserved + * 8 : reserved + * 9-11 : reserved + * + * Note we have UOP and PEBS bits reserved for now + * just in case if we will need them once + */ +#define P4_PEBS_CONFIG_ENABLE (1 << 7) +#define P4_PEBS_CONFIG_UOP_TAG (1 << 8) +#define P4_PEBS_CONFIG_METRIC_MASK 0x3f +#define P4_PEBS_CONFIG_MASK 0xff + +/* + * mem: Only counters MSR_IQ_COUNTER4 (16) and + * MSR_IQ_COUNTER5 (17) are allowed for PEBS sampling + */ +#define P4_PEBS_ENABLE 0x02000000U +#define P4_PEBS_ENABLE_UOP_TAG 0x01000000U + +#define p4_config_unpack_metric(v) (((u64)(v)) & P4_PEBS_CONFIG_METRIC_MASK) +#define p4_config_unpack_pebs(v) (((u64)(v)) & P4_PEBS_CONFIG_MASK) + +#define p4_config_pebs_has(v, mask) (p4_config_unpack_pebs(v) & (mask)) + +enum P4_PEBS_METRIC { + P4_PEBS_METRIC__none, + + P4_PEBS_METRIC__1stl_cache_load_miss_retired, + P4_PEBS_METRIC__2ndl_cache_load_miss_retired, + P4_PEBS_METRIC__dtlb_load_miss_retired, + P4_PEBS_METRIC__dtlb_store_miss_retired, + P4_PEBS_METRIC__dtlb_all_miss_retired, + P4_PEBS_METRIC__tagged_mispred_branch, + P4_PEBS_METRIC__mob_load_replay_retired, + P4_PEBS_METRIC__split_load_retired, + P4_PEBS_METRIC__split_store_retired, + + P4_PEBS_METRIC__max }; #endif /* PERF_EVENT_P4_H */ + diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 7e5c6a60b8ee..325b7bdbebaa 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -762,6 +762,7 @@ extern void init_c1e_mask(void); extern unsigned long boot_option_idle_override; extern unsigned long idle_halt; extern unsigned long idle_nomwait; +extern bool c1e_detected; /* * on systems with caches, caches must be flashed as the absolute @@ -1025,4 +1026,24 @@ unsigned long calc_aperfmperf_ratio(struct aperfmperf *old, return ratio; } +/* + * AMD errata checking + */ +#ifdef CONFIG_CPU_SUP_AMD +extern const int amd_erratum_383[]; +extern const int amd_erratum_400[]; +extern bool cpu_has_amd_erratum(const int *); + +#define AMD_LEGACY_ERRATUM(...) { -1, __VA_ARGS__, 0 } +#define AMD_OSVW_ERRATUM(osvw_id, ...) { osvw_id, __VA_ARGS__, 0 } +#define AMD_MODEL_RANGE(f, m_start, s_start, m_end, s_end) \ + ((f << 24) | (m_start << 16) | (s_start << 12) | (m_end << 4) | (s_end)) +#define AMD_MODEL_RANGE_FAMILY(range) (((range) >> 24) & 0xff) +#define AMD_MODEL_RANGE_START(range) (((range) >> 12) & 0xfff) +#define AMD_MODEL_RANGE_END(range) ((range) & 0xfff) + +#else +#define cpu_has_amd_erratum(x) (false) +#endif /* CONFIG_CPU_SUP_AMD */ + #endif /* _ASM_X86_PROCESSOR_H */ diff --git a/arch/x86/include/asm/required-features.h b/arch/x86/include/asm/required-features.h index 64cf2d24fad1..6c7fc25f2c34 100644 --- a/arch/x86/include/asm/required-features.h +++ b/arch/x86/include/asm/required-features.h @@ -84,5 +84,7 @@ #define REQUIRED_MASK5 0 #define REQUIRED_MASK6 0 #define REQUIRED_MASK7 0 +#define REQUIRED_MASK8 0 +#define REQUIRED_MASK9 0 #endif /* _ASM_X86_REQUIRED_FEATURES_H */ diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h index 606ede126972..d1e41b0f9b60 100644 --- a/arch/x86/include/asm/rwsem.h +++ b/arch/x86/include/asm/rwsem.h @@ -118,7 +118,7 @@ static inline void __down_read(struct rw_semaphore *sem) { asm volatile("# beginning down_read\n\t" LOCK_PREFIX _ASM_INC "(%1)\n\t" - /* adds 0x00000001, returns the old value */ + /* adds 0x00000001 */ " jns 1f\n" " call call_rwsem_down_read_failed\n" "1:\n\t" @@ -156,11 +156,9 @@ static inline int __down_read_trylock(struct rw_semaphore *sem) static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) { rwsem_count_t tmp; - - tmp = RWSEM_ACTIVE_WRITE_BIAS; asm volatile("# beginning down_write\n\t" LOCK_PREFIX " xadd %1,(%2)\n\t" - /* subtract 0x0000ffff, returns the old value */ + /* adds 0xffff0001, returns the old value */ " test %1,%1\n\t" /* was the count 0 before? */ " jz 1f\n" @@ -168,7 +166,7 @@ static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) "1:\n" "# ending down_write" : "+m" (sem->count), "=d" (tmp) - : "a" (sem), "1" (tmp) + : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS) : "memory", "cc"); } @@ -195,16 +193,16 @@ static inline int __down_write_trylock(struct rw_semaphore *sem) */ static inline void __up_read(struct rw_semaphore *sem) { - rwsem_count_t tmp = -RWSEM_ACTIVE_READ_BIAS; + rwsem_count_t tmp; asm volatile("# beginning __up_read\n\t" LOCK_PREFIX " xadd %1,(%2)\n\t" /* subtracts 1, returns the old value */ " jns 1f\n\t" - " call call_rwsem_wake\n" + " call call_rwsem_wake\n" /* expects old value in %edx */ "1:\n" "# ending __up_read\n" : "+m" (sem->count), "=d" (tmp) - : "a" (sem), "1" (tmp) + : "a" (sem), "1" (-RWSEM_ACTIVE_READ_BIAS) : "memory", "cc"); } @@ -216,10 +214,9 @@ static inline void __up_write(struct rw_semaphore *sem) rwsem_count_t tmp; asm volatile("# beginning __up_write\n\t" LOCK_PREFIX " xadd %1,(%2)\n\t" - /* tries to transition - 0xffff0001 -> 0x00000000 */ - " jz 1f\n" - " call call_rwsem_wake\n" + /* subtracts 0xffff0001, returns the old value */ + " jns 1f\n\t" + " call call_rwsem_wake\n" /* expects old value in %edx */ "1:\n\t" "# ending __up_write\n" : "+m" (sem->count), "=d" (tmp) diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index 86b1506f4179..ef292c792d74 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -82,7 +82,7 @@ void *extend_brk(size_t size, size_t align); * executable.) */ #define RESERVE_BRK(name,sz) \ - static void __section(.discard) __used \ + static void __section(.discard.text) __used \ __brk_reservation_fn_##name##__(void) { \ asm volatile ( \ ".pushsection .brk_reservation,\"aw\",@nobits;" \ diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h index 4dab78edbad9..2b16a2ad23dc 100644 --- a/arch/x86/include/asm/stacktrace.h +++ b/arch/x86/include/asm/stacktrace.h @@ -1,6 +1,13 @@ +/* + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs + */ + #ifndef _ASM_X86_STACKTRACE_H #define _ASM_X86_STACKTRACE_H +#include <linux/uaccess.h> + extern int kstack_depth_to_print; struct thread_info; @@ -42,4 +49,46 @@ void dump_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack, unsigned long bp, const struct stacktrace_ops *ops, void *data); +#ifdef CONFIG_X86_32 +#define STACKSLOTS_PER_LINE 8 +#define get_bp(bp) asm("movl %%ebp, %0" : "=r" (bp) :) +#else +#define STACKSLOTS_PER_LINE 4 +#define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :) +#endif + +extern void +show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, + unsigned long *stack, unsigned long bp, char *log_lvl); + +extern void +show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, + unsigned long *sp, unsigned long bp, char *log_lvl); + +extern unsigned int code_bytes; + +/* The form of the top of the frame on the stack */ +struct stack_frame { + struct stack_frame *next_frame; + unsigned long return_address; +}; + +struct stack_frame_ia32 { + u32 next_frame; + u32 return_address; +}; + +static inline unsigned long caller_frame_pointer(void) +{ + struct stack_frame *frame; + + get_bp(frame); + +#ifdef CONFIG_FRAME_POINTER + frame = frame->next_frame; +#endif + + return (unsigned long)frame; +} + #endif /* _ASM_X86_STACKTRACE_H */ diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h index 9c371e4a9fa6..7fda040a76cd 100644 --- a/arch/x86/include/asm/xen/hypercall.h +++ b/arch/x86/include/asm/xen/hypercall.h @@ -417,6 +417,12 @@ HYPERVISOR_nmi_op(unsigned long op, unsigned long arg) return _hypercall2(int, nmi_op, op, arg); } +static inline unsigned long __must_check +HYPERVISOR_hvm_op(int op, void *arg) +{ + return _hypercall2(unsigned long, hvm_op, op, arg); +} + static inline void MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set) { diff --git a/arch/x86/include/asm/xsave.h b/arch/x86/include/asm/xsave.h index 32c36668fa7b..c6ce2452f10c 100644 --- a/arch/x86/include/asm/xsave.h +++ b/arch/x86/include/asm/xsave.h @@ -3,7 +3,8 @@ #include <linux/types.h> #include <asm/processor.h> -#include <asm/i387.h> + +#define XSTATE_CPUID 0x0000000d #define XSTATE_FP 0x1 #define XSTATE_SSE 0x2 @@ -32,10 +33,8 @@ extern unsigned int xstate_size; extern u64 pcntxt_mask; -extern struct xsave_struct *init_xstate_buf; extern u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS]; -extern void xsave_cntxt_init(void); extern void xsave_init(void); extern void update_regset_xstate_info(unsigned int size, u64 xstate_mask); extern int init_fpu(struct task_struct *child); @@ -65,6 +64,16 @@ static inline int fpu_xrstor_checking(struct fpu *fpu) static inline int xsave_user(struct xsave_struct __user *buf) { int err; + + /* + * Clear the xsave header first, so that reserved fields are + * initialized to zero. + */ + err = __clear_user(&buf->xsave_hdr, + sizeof(struct xsave_hdr_struct)); + if (unlikely(err)) + return -EFAULT; + __asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x27\n" "2:\n" ".section .fixup,\"ax\"\n" @@ -117,12 +126,25 @@ static inline void xrstor_state(struct xsave_struct *fx, u64 mask) : "memory"); } +static inline void xsave_state(struct xsave_struct *fx, u64 mask) +{ + u32 lmask = mask; + u32 hmask = mask >> 32; + + asm volatile(".byte " REX_PREFIX "0x0f,0xae,0x27\n\t" + : : "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask) + : "memory"); +} + static inline void fpu_xsave(struct fpu *fpu) { /* This, however, we can work around by forcing the compiler to select an addressing mode that doesn't require extended registers. */ - __asm__ __volatile__(".byte " REX_PREFIX "0x0f,0xae,0x27" - : : "D" (&(fpu->state->xsave)), - "a" (-1), "d"(-1) : "memory"); + alternative_input( + ".byte " REX_PREFIX "0x0f,0xae,0x27", + ".byte " REX_PREFIX "0x0f,0xae,0x37", + X86_FEATURE_XSAVEOPT, + [fx] "D" (&fpu->state->xsave), "a" (-1), "d" (-1) : + "memory"); } #endif diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index e77b22083721..0925676266bd 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -104,6 +104,7 @@ obj-$(CONFIG_SCx200) += scx200.o scx200-y += scx200_32.o obj-$(CONFIG_OLPC) += olpc.o +obj-$(CONFIG_OLPC_OPENFIRMWARE) += olpc_ofw.o obj-$(CONFIG_X86_MRST) += mrst.o microcode-y := microcode_core.o diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S index 580b4e296010..28595d6df47c 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -104,7 +104,7 @@ _start: movl %eax, %ecx orl %edx, %ecx jz 1f - movl $0xc0000080, %ecx + movl $MSR_EFER, %ecx wrmsr 1: diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 70237732a6c7..f65ab8b014c4 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -214,6 +214,7 @@ void __init_or_module apply_alternatives(struct alt_instr *start, u8 *instr = a->instr; BUG_ON(a->replacementlen > a->instrlen); BUG_ON(a->instrlen > sizeof(insnbuf)); + BUG_ON(a->cpuid >= NCAPINTS*32); if (!boot_cpu_has(a->cpuid)) continue; #ifdef CONFIG_X86_64 diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 0d20286d78c6..fa044e1e30a2 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -2572,6 +2572,11 @@ static phys_addr_t amd_iommu_iova_to_phys(struct iommu_domain *dom, static int amd_iommu_domain_has_cap(struct iommu_domain *domain, unsigned long cap) { + switch (cap) { + case IOMMU_CAP_CACHE_COHERENCY: + return 1; + } + return 0; } @@ -2609,8 +2614,7 @@ int __init amd_iommu_init_passthrough(void) pt_domain->mode |= PAGE_MODE_NONE; - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - + for_each_pci_dev(dev) { if (!check_device(&dev->dev)) continue; diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index a35347501d36..8dd77800ff5d 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -43,10 +43,11 @@ #include <asm/fixmap.h> #include <asm/apb_timer.h> +#include <asm/mrst.h> #define APBT_MASK CLOCKSOURCE_MASK(32) #define APBT_SHIFT 22 -#define APBT_CLOCKEVENT_RATING 150 +#define APBT_CLOCKEVENT_RATING 110 #define APBT_CLOCKSOURCE_RATING 250 #define APBT_MIN_DELTA_USEC 200 @@ -83,8 +84,6 @@ struct apbt_dev { char name[10]; }; -int disable_apbt_percpu __cpuinitdata; - static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev); #ifdef CONFIG_SMP @@ -195,29 +194,6 @@ static struct clock_event_device apbt_clockevent = { }; /* - * if user does not want to use per CPU apb timer, just give it a lower rating - * than local apic timer and skip the late per cpu timer init. - */ -static inline int __init setup_x86_mrst_timer(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp("apbt_only", arg) == 0) - disable_apbt_percpu = 0; - else if (strcmp("lapic_and_apbt", arg) == 0) - disable_apbt_percpu = 1; - else { - pr_warning("X86 MRST timer option %s not recognised" - " use x86_mrst_timer=apbt_only or lapic_and_apbt\n", - arg); - return -EINVAL; - } - return 0; -} -__setup("x86_mrst_timer=", setup_x86_mrst_timer); - -/* * start count down from 0xffff_ffff. this is done by toggling the enable bit * then load initial load count to ~0. */ @@ -335,7 +311,7 @@ static int __init apbt_clockevent_register(void) adev->num = smp_processor_id(); memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device)); - if (disable_apbt_percpu) { + if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) { apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100; global_clock_event = &adev->evt; printk(KERN_DEBUG "%s clockevent registered as global\n", @@ -429,7 +405,8 @@ static int apbt_cpuhp_notify(struct notifier_block *n, static __init int apbt_late_init(void) { - if (disable_apbt_percpu || !apb_timer_block_enabled) + if (mrst_timer_options == MRST_TIMER_LAPIC_APBT || + !apb_timer_block_enabled) return 0; /* This notifier should be called after workqueue is ready */ hotcpu_notifier(apbt_cpuhp_notify, -20); @@ -450,6 +427,8 @@ static void apbt_set_mode(enum clock_event_mode mode, int timer_num; struct apbt_dev *adev = EVT_TO_APBT_DEV(evt); + BUG_ON(!apbt_virt_address); + timer_num = adev->num; pr_debug("%s CPU %d timer %d mode=%d\n", __func__, first_cpu(*evt->cpumask), timer_num, mode); @@ -676,7 +655,7 @@ void __init apbt_time_init(void) } #ifdef CONFIG_SMP /* kernel cmdline disable apb timer, so we will use lapic timers */ - if (disable_apbt_percpu) { + if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) { printk(KERN_INFO "apbt: disabled per cpu timer\n"); return; } diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index b5d8b0bcf235..a2e0caf26e17 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -280,7 +280,7 @@ void __init early_gart_iommu_check(void) * or BIOS forget to put that in reserved. * try to update e820 to make that region as reserved. */ - u32 agp_aper_base = 0, agp_aper_order = 0; + u32 agp_aper_order = 0; int i, fix, slot, valid_agp = 0; u32 ctl; u32 aper_size = 0, aper_order = 0, last_aper_order = 0; @@ -291,7 +291,7 @@ void __init early_gart_iommu_check(void) return; /* This is mostly duplicate of iommu_hole_init */ - agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp); + search_agp_bridge(&agp_aper_order, &valid_agp); fix = 0; for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile index 565c1bfc507d..910f20b457c4 100644 --- a/arch/x86/kernel/apic/Makefile +++ b/arch/x86/kernel/apic/Makefile @@ -2,7 +2,12 @@ # Makefile for local APIC drivers and for the IO-APIC code # -obj-$(CONFIG_X86_LOCAL_APIC) += apic.o apic_noop.o probe_$(BITS).o ipi.o nmi.o +obj-$(CONFIG_X86_LOCAL_APIC) += apic.o apic_noop.o probe_$(BITS).o ipi.o +ifneq ($(CONFIG_HARDLOCKUP_DETECTOR),y) +obj-$(CONFIG_X86_LOCAL_APIC) += nmi.o +endif +obj-$(CONFIG_HARDLOCKUP_DETECTOR) += hw_nmi.o + obj-$(CONFIG_X86_IO_APIC) += io_apic.o obj-$(CONFIG_SMP) += ipi.o diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 425e53a87feb..8593582d8022 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -129,7 +129,6 @@ int es7000_plat; * GSI override for ES7000 platforms. */ -static unsigned int base; static int __cpuinit wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip) { diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c new file mode 100644 index 000000000000..cefd6942f0e9 --- /dev/null +++ b/arch/x86/kernel/apic/hw_nmi.c @@ -0,0 +1,107 @@ +/* + * HW NMI watchdog support + * + * started by Don Zickus, Copyright (C) 2010 Red Hat, Inc. + * + * Arch specific calls to support NMI watchdog + * + * Bits copied from original nmi.c file + * + */ +#include <asm/apic.h> + +#include <linux/cpumask.h> +#include <linux/kdebug.h> +#include <linux/notifier.h> +#include <linux/kprobes.h> +#include <linux/nmi.h> +#include <linux/module.h> + +/* For reliability, we're prepared to waste bits here. */ +static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly; + +u64 hw_nmi_get_sample_period(void) +{ + return (u64)(cpu_khz) * 1000 * 60; +} + +#ifdef ARCH_HAS_NMI_WATCHDOG +void arch_trigger_all_cpu_backtrace(void) +{ + int i; + + cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask); + + printk(KERN_INFO "sending NMI to all CPUs:\n"); + apic->send_IPI_all(NMI_VECTOR); + + /* Wait for up to 10 seconds for all CPUs to do the backtrace */ + for (i = 0; i < 10 * 1000; i++) { + if (cpumask_empty(to_cpumask(backtrace_mask))) + break; + mdelay(1); + } +} + +static int __kprobes +arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self, + unsigned long cmd, void *__args) +{ + struct die_args *args = __args; + struct pt_regs *regs; + int cpu = smp_processor_id(); + + switch (cmd) { + case DIE_NMI: + case DIE_NMI_IPI: + break; + + default: + return NOTIFY_DONE; + } + + regs = args->regs; + + if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) { + static arch_spinlock_t lock = __ARCH_SPIN_LOCK_UNLOCKED; + + arch_spin_lock(&lock); + printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu); + show_regs(regs); + dump_stack(); + arch_spin_unlock(&lock); + cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask)); + return NOTIFY_STOP; + } + + return NOTIFY_DONE; +} + +static __read_mostly struct notifier_block backtrace_notifier = { + .notifier_call = arch_trigger_all_cpu_backtrace_handler, + .next = NULL, + .priority = 1 +}; + +static int __init register_trigger_all_cpu_backtrace(void) +{ + register_die_notifier(&backtrace_notifier); + return 0; +} +early_initcall(register_trigger_all_cpu_backtrace); +#endif + +/* STUB calls to mimic old nmi_watchdog behaviour */ +#if defined(CONFIG_X86_LOCAL_APIC) +unsigned int nmi_watchdog = NMI_NONE; +EXPORT_SYMBOL(nmi_watchdog); +void acpi_nmi_enable(void) { return; } +void acpi_nmi_disable(void) { return; } +#endif +atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ +EXPORT_SYMBOL(nmi_active); +int unknown_nmi_panic; +void cpu_nmi_set_wd_enabled(void) { return; } +void stop_apic_nmi_watchdog(void *unused) { return; } +void setup_apic_nmi_watchdog(void *unused) { return; } +int __init check_nmi_watchdog(void) { return 0; } diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index e41ed24ab26d..4dc0084ec1b1 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3397,7 +3397,7 @@ static int set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) cfg = desc->chip_data; - read_msi_msg_desc(desc, &msg); + get_cached_msi_msg_desc(desc, &msg); msg.data &= ~MSI_DATA_VECTOR_MASK; msg.data |= MSI_DATA_VECTOR(cfg->vector); diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index 1edaf15c0b8e..a43f71cb30f8 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -401,13 +401,6 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) int cpu = smp_processor_id(); int rc = 0; - /* check for other users first */ - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - rc = 1; - touched = 1; - } - sum = get_timer_irqs(cpu); if (__get_cpu_var(nmi_touch)) { diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 3a785da34b6f..3f0ebe429a01 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -12,11 +12,11 @@ endif nostackp := $(call cc-option, -fno-stack-protector) CFLAGS_common.o := $(nostackp) -obj-y := intel_cacheinfo.o addon_cpuid_features.o +obj-y := intel_cacheinfo.o scattered.o topology.o obj-y += proc.o capflags.o powerflags.o common.o obj-y += vmware.o hypervisor.o sched.o mshyperv.o -obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o +obj-$(CONFIG_X86_32) += bugs.o obj-$(CONFIG_X86_64) += bugs_64.o obj-$(CONFIG_CPU_SUP_INTEL) += intel.o diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index e485825130d2..60a57b13082d 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -466,7 +466,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) } } - if (c->x86 == 0x10 || c->x86 == 0x11) + if (c->x86 >= 0x10) set_cpu_cap(c, X86_FEATURE_REP_GOOD); /* get apicid instead of initial apic id from cpuid */ @@ -529,7 +529,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) num_cache_leaves = 3; } - if (c->x86 >= 0xf && c->x86 <= 0x11) + if (c->x86 >= 0xf) set_cpu_cap(c, X86_FEATURE_K8); if (cpu_has_xmm2) { @@ -546,7 +546,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) fam10h_check_enable_mmcfg(); } - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { + if (c == &boot_cpu_data && c->x86 >= 0xf) { unsigned long long tseg; /* @@ -609,3 +609,74 @@ static const struct cpu_dev __cpuinitconst amd_cpu_dev = { }; cpu_dev_register(amd_cpu_dev); + +/* + * AMD errata checking + * + * Errata are defined as arrays of ints using the AMD_LEGACY_ERRATUM() or + * AMD_OSVW_ERRATUM() macros. The latter is intended for newer errata that + * have an OSVW id assigned, which it takes as first argument. Both take a + * variable number of family-specific model-stepping ranges created by + * AMD_MODEL_RANGE(). Each erratum also has to be declared as extern const + * int[] in arch/x86/include/asm/processor.h. + * + * Example: + * + * const int amd_erratum_319[] = + * AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0x4, 0x2), + * AMD_MODEL_RANGE(0x10, 0x8, 0x0, 0x8, 0x0), + * AMD_MODEL_RANGE(0x10, 0x9, 0x0, 0x9, 0x0)); + */ + +const int amd_erratum_400[] = + AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf), + AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf)); +EXPORT_SYMBOL_GPL(amd_erratum_400); + +const int amd_erratum_383[] = + AMD_OSVW_ERRATUM(3, AMD_MODEL_RANGE(0x10, 0, 0, 0xff, 0xf)); +EXPORT_SYMBOL_GPL(amd_erratum_383); + +bool cpu_has_amd_erratum(const int *erratum) +{ + struct cpuinfo_x86 *cpu = ¤t_cpu_data; + int osvw_id = *erratum++; + u32 range; + u32 ms; + + /* + * If called early enough that current_cpu_data hasn't been initialized + * yet, fall back to boot_cpu_data. + */ + if (cpu->x86 == 0) + cpu = &boot_cpu_data; + + if (cpu->x86_vendor != X86_VENDOR_AMD) + return false; + + if (osvw_id >= 0 && osvw_id < 65536 && + cpu_has(cpu, X86_FEATURE_OSVW)) { + u64 osvw_len; + + rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, osvw_len); + if (osvw_id < osvw_len) { + u64 osvw_bits; + + rdmsrl(MSR_AMD64_OSVW_STATUS + (osvw_id >> 6), + osvw_bits); + return osvw_bits & (1ULL << (osvw_id & 0x3f)); + } + } + + /* OSVW unavailable or ID unknown, match family-model-stepping range */ + ms = (cpu->x86_model << 8) | cpu->x86_mask; + while ((range = *erratum++)) + if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) && + (ms >= AMD_MODEL_RANGE_START(range)) && + (ms <= AMD_MODEL_RANGE_END(range))) + return true; + + return false; +} + +EXPORT_SYMBOL_GPL(cpu_has_amd_erratum); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 68e4a6f2211e..490dac63c2d2 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -140,10 +140,18 @@ EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); static int __init x86_xsave_setup(char *s) { setup_clear_cpu_cap(X86_FEATURE_XSAVE); + setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); return 1; } __setup("noxsave", x86_xsave_setup); +static int __init x86_xsaveopt_setup(char *s) +{ + setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); + return 1; +} +__setup("noxsaveopt", x86_xsaveopt_setup); + #ifdef CONFIG_X86_32 static int cachesize_override __cpuinitdata = -1; static int disable_x86_serial_nr __cpuinitdata = 1; @@ -551,6 +559,16 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) c->x86_capability[4] = excap; } + /* Additional Intel-defined flags: level 0x00000007 */ + if (c->cpuid_level >= 0x00000007) { + u32 eax, ebx, ecx, edx; + + cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx); + + if (eax > 0) + c->x86_capability[9] = ebx; + } + /* AMD-defined flags: level 0x80000001 */ xlvl = cpuid_eax(0x80000000); c->extended_cpuid_level = xlvl; @@ -576,6 +594,7 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) if (c->extended_cpuid_level >= 0x80000007) c->x86_power = cpuid_edx(0x80000007); + init_scattered_cpuid_features(c); } static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c) @@ -731,7 +750,6 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c) get_model_name(c); /* Default name */ - init_scattered_cpuid_features(c); detect_nopl(c); } @@ -1192,6 +1210,7 @@ void __cpuinit cpu_init(void) dbg_restore_debug_regs(); fpu_init(); + xsave_init(); raw_local_save_flags(kernel_eflags); @@ -1252,12 +1271,7 @@ void __cpuinit cpu_init(void) clear_used_math(); mxcsr_feature_mask_init(); - /* - * Boot processor to setup the FP and extended state context info. - */ - if (smp_processor_id() == boot_cpu_id) - init_thread_xstate(); - + fpu_init(); xsave_init(); } #endif diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c index dd531cc56a8f..8095f8611f8a 100644 --- a/arch/x86/kernel/cpu/hypervisor.c +++ b/arch/x86/kernel/cpu/hypervisor.c @@ -34,6 +34,9 @@ static const __initconst struct hypervisor_x86 * const hypervisors[] = { &x86_hyper_vmware, &x86_hyper_ms_hyperv, +#ifdef CONFIG_XEN_PVHVM + &x86_hyper_xen_hvm, +#endif }; const struct hypervisor_x86 *x86_hyper; diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 33eae2062cf5..898c2f4eab88 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -347,8 +347,8 @@ static struct amd_l3_cache * __cpuinit amd_init_l3_cache(int node) return l3; } -static void __cpuinit -amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf) +static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, + int index) { int node; @@ -396,20 +396,39 @@ amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf) this_leaf->l3 = l3_caches[node]; } +/* + * check whether a slot used for disabling an L3 index is occupied. + * @l3: L3 cache descriptor + * @slot: slot number (0..1) + * + * @returns: the disabled index if used or negative value if slot free. + */ +int amd_get_l3_disable_slot(struct amd_l3_cache *l3, unsigned slot) +{ + unsigned int reg = 0; + + pci_read_config_dword(l3->dev, 0x1BC + slot * 4, ®); + + /* check whether this slot is activated already */ + if (reg & (3UL << 30)) + return reg & 0xfff; + + return -1; +} + static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf, unsigned int slot) { - struct pci_dev *dev = this_leaf->l3->dev; - unsigned int reg = 0; + int index; if (!this_leaf->l3 || !this_leaf->l3->can_disable) return -EINVAL; - if (!dev) - return -EINVAL; + index = amd_get_l3_disable_slot(this_leaf->l3, slot); + if (index >= 0) + return sprintf(buf, "%d\n", index); - pci_read_config_dword(dev, 0x1BC + slot * 4, ®); - return sprintf(buf, "0x%08x\n", reg); + return sprintf(buf, "FREE\n"); } #define SHOW_CACHE_DISABLE(slot) \ @@ -451,37 +470,74 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu, } } - -static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, - const char *buf, size_t count, - unsigned int slot) +/* + * disable a L3 cache index by using a disable-slot + * + * @l3: L3 cache descriptor + * @cpu: A CPU on the node containing the L3 cache + * @slot: slot number (0..1) + * @index: index to disable + * + * @return: 0 on success, error status on failure + */ +int amd_set_l3_disable_slot(struct amd_l3_cache *l3, int cpu, unsigned slot, + unsigned long index) { - struct pci_dev *dev = this_leaf->l3->dev; - int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map)); - unsigned long val = 0; + int ret = 0; #define SUBCACHE_MASK (3UL << 20) #define SUBCACHE_INDEX 0xfff - if (!this_leaf->l3 || !this_leaf->l3->can_disable) + /* + * check whether this slot is already used or + * the index is already disabled + */ + ret = amd_get_l3_disable_slot(l3, slot); + if (ret >= 0) return -EINVAL; + /* + * check whether the other slot has disabled the + * same index already + */ + if (index == amd_get_l3_disable_slot(l3, !slot)) + return -EINVAL; + + /* do not allow writes outside of allowed bits */ + if ((index & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) || + ((index & SUBCACHE_INDEX) > l3->indices)) + return -EINVAL; + + amd_l3_disable_index(l3, cpu, slot, index); + + return 0; +} + +static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, + const char *buf, size_t count, + unsigned int slot) +{ + unsigned long val = 0; + int cpu, err = 0; + if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (!dev) + if (!this_leaf->l3 || !this_leaf->l3->can_disable) return -EINVAL; - if (strict_strtoul(buf, 10, &val) < 0) - return -EINVAL; + cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map)); - /* do not allow writes outside of allowed bits */ - if ((val & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) || - ((val & SUBCACHE_INDEX) > this_leaf->l3->indices)) + if (strict_strtoul(buf, 10, &val) < 0) return -EINVAL; - amd_l3_disable_index(this_leaf->l3, cpu, slot, val); - + err = amd_set_l3_disable_slot(this_leaf->l3, cpu, slot, val); + if (err) { + if (err == -EEXIST) + printk(KERN_WARNING "L3 disable slot %d in use!\n", + slot); + return err; + } return count; } @@ -502,7 +558,7 @@ static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644, #else /* CONFIG_CPU_SUP_AMD */ static void __cpuinit -amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf) +amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, int index) { }; #endif /* CONFIG_CPU_SUP_AMD */ @@ -518,7 +574,7 @@ __cpuinit cpuid4_cache_lookup_regs(int index, if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) { amd_cpuid4(index, &eax, &ebx, &ecx); - amd_check_l3_disable(index, this_leaf); + amd_check_l3_disable(this_leaf, index); } else { cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx); } diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 1970ef911c99..ed41562909fe 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -51,7 +51,7 @@ static DEFINE_MUTEX(mce_read_mutex); #define rcu_dereference_check_mce(p) \ - rcu_dereference_check((p), \ + rcu_dereference_index_check((p), \ rcu_read_lock_sched_held() || \ lockdep_is_held(&mce_read_mutex)) @@ -107,8 +107,8 @@ EXPORT_SYMBOL_GPL(x86_mce_decoder_chain); static int default_decode_mce(struct notifier_block *nb, unsigned long val, void *data) { - pr_emerg("No human readable MCE decoding support on this CPU type.\n"); - pr_emerg("Run the message through 'mcelog --ascii' to decode.\n"); + pr_emerg(HW_ERR "No human readable MCE decoding support on this CPU type.\n"); + pr_emerg(HW_ERR "Run the message through 'mcelog --ascii' to decode.\n"); return NOTIFY_STOP; } @@ -211,11 +211,11 @@ void mce_log(struct mce *mce) static void print_mce(struct mce *m) { - pr_emerg("CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n", + pr_emerg(HW_ERR "CPU %d: Machine Check Exception: %Lx Bank %d: %016Lx\n", m->extcpu, m->mcgstatus, m->bank, m->status); if (m->ip) { - pr_emerg("RIP%s %02x:<%016Lx> ", + pr_emerg(HW_ERR "RIP%s %02x:<%016Lx> ", !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "", m->cs, m->ip); @@ -224,14 +224,14 @@ static void print_mce(struct mce *m) pr_cont("\n"); } - pr_emerg("TSC %llx ", m->tsc); + pr_emerg(HW_ERR "TSC %llx ", m->tsc); if (m->addr) pr_cont("ADDR %llx ", m->addr); if (m->misc) pr_cont("MISC %llx ", m->misc); pr_cont("\n"); - pr_emerg("PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n", + pr_emerg(HW_ERR "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n", m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid); /* @@ -241,16 +241,6 @@ static void print_mce(struct mce *m) atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m); } -static void print_mce_head(void) -{ - pr_emerg("\nHARDWARE ERROR\n"); -} - -static void print_mce_tail(void) -{ - pr_emerg("This is not a software problem!\n"); -} - #define PANIC_TIMEOUT 5 /* 5 seconds */ static atomic_t mce_paniced; @@ -291,7 +281,6 @@ static void mce_panic(char *msg, struct mce *final, char *exp) if (atomic_inc_return(&mce_fake_paniced) > 1) return; } - print_mce_head(); /* First print corrected ones that are still unlogged */ for (i = 0; i < MCE_LOG_LEN; i++) { struct mce *m = &mcelog.entry[i]; @@ -322,16 +311,15 @@ static void mce_panic(char *msg, struct mce *final, char *exp) apei_err = apei_write_mce(final); } if (cpu_missing) - printk(KERN_EMERG "Some CPUs didn't answer in synchronization\n"); - print_mce_tail(); + pr_emerg(HW_ERR "Some CPUs didn't answer in synchronization\n"); if (exp) - printk(KERN_EMERG "Machine check: %s\n", exp); + pr_emerg(HW_ERR "Machine check: %s\n", exp); if (!fake_panic) { if (panic_timeout == 0) panic_timeout = mce_panic_timeout; panic(msg); } else - printk(KERN_EMERG "Fake kernel panic: %s\n", msg); + pr_emerg(HW_ERR "Fake kernel panic: %s\n", msg); } /* Support code for software error injection */ @@ -1221,7 +1209,7 @@ int mce_notify_irq(void) schedule_work(&mce_trigger_work); if (__ratelimit(&ratelimit)) - printk(KERN_INFO "Machine check events logged\n"); + pr_info(HW_ERR "Machine check events logged\n"); return 1; } diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c index 62b48e40920a..6fcd0936194f 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c @@ -95,19 +95,20 @@ static void cmci_discover(int banks, int boot) rdmsrl(MSR_IA32_MCx_CTL2(i), val); /* Already owned by someone else? */ - if (val & CMCI_EN) { + if (val & MCI_CTL2_CMCI_EN) { if (test_and_clear_bit(i, owned) && !boot) print_update("SHD", &hdr, i); __clear_bit(i, __get_cpu_var(mce_poll_banks)); continue; } - val |= CMCI_EN | CMCI_THRESHOLD; + val &= ~MCI_CTL2_CMCI_THRESHOLD_MASK; + val |= MCI_CTL2_CMCI_EN | CMCI_THRESHOLD; wrmsrl(MSR_IA32_MCx_CTL2(i), val); rdmsrl(MSR_IA32_MCx_CTL2(i), val); /* Did the enable bit stick? -- the bank supports CMCI */ - if (val & CMCI_EN) { + if (val & MCI_CTL2_CMCI_EN) { if (!test_and_set_bit(i, owned) && !boot) print_update("CMCI", &hdr, i); __clear_bit(i, __get_cpu_var(mce_poll_banks)); @@ -155,7 +156,7 @@ void cmci_clear(void) continue; /* Disable CMCI */ rdmsrl(MSR_IA32_MCx_CTL2(i), val); - val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK); + val &= ~(MCI_CTL2_CMCI_EN|MCI_CTL2_CMCI_THRESHOLD_MASK); wrmsrl(MSR_IA32_MCx_CTL2(i), val); __clear_bit(i, __get_cpu_var(mce_banks_owned)); } diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index e1a0a3bf9716..c2a8b26d4fea 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -34,15 +34,25 @@ /* How long to wait between reporting thermal events */ #define CHECK_INTERVAL (300 * HZ) +#define THERMAL_THROTTLING_EVENT 0 +#define POWER_LIMIT_EVENT 1 + /* - * Current thermal throttling state: + * Current thermal event state: */ -struct thermal_state { - bool is_throttled; - +struct _thermal_state { + bool new_event; + int event; u64 next_check; - unsigned long throttle_count; - unsigned long last_throttle_count; + unsigned long count; + unsigned long last_count; +}; + +struct thermal_state { + struct _thermal_state core_throttle; + struct _thermal_state core_power_limit; + struct _thermal_state package_throttle; + struct _thermal_state package_power_limit; }; static DEFINE_PER_CPU(struct thermal_state, thermal_state); @@ -53,11 +63,13 @@ static u32 lvtthmr_init __read_mostly; #ifdef CONFIG_SYSFS #define define_therm_throt_sysdev_one_ro(_name) \ - static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL) + static SYSDEV_ATTR(_name, 0444, \ + therm_throt_sysdev_show_##_name, \ + NULL) \ -#define define_therm_throt_sysdev_show_func(name) \ +#define define_therm_throt_sysdev_show_func(event, name) \ \ -static ssize_t therm_throt_sysdev_show_##name( \ +static ssize_t therm_throt_sysdev_show_##event##_##name( \ struct sys_device *dev, \ struct sysdev_attribute *attr, \ char *buf) \ @@ -66,30 +78,42 @@ static ssize_t therm_throt_sysdev_show_##name( \ ssize_t ret; \ \ preempt_disable(); /* CPU hotplug */ \ - if (cpu_online(cpu)) \ + if (cpu_online(cpu)) { \ ret = sprintf(buf, "%lu\n", \ - per_cpu(thermal_state, cpu).name); \ - else \ + per_cpu(thermal_state, cpu).event.name); \ + } else \ ret = 0; \ preempt_enable(); \ \ return ret; \ } -define_therm_throt_sysdev_show_func(throttle_count); -define_therm_throt_sysdev_one_ro(throttle_count); +define_therm_throt_sysdev_show_func(core_throttle, count); +define_therm_throt_sysdev_one_ro(core_throttle_count); + +define_therm_throt_sysdev_show_func(core_power_limit, count); +define_therm_throt_sysdev_one_ro(core_power_limit_count); + +define_therm_throt_sysdev_show_func(package_throttle, count); +define_therm_throt_sysdev_one_ro(package_throttle_count); + +define_therm_throt_sysdev_show_func(package_power_limit, count); +define_therm_throt_sysdev_one_ro(package_power_limit_count); static struct attribute *thermal_throttle_attrs[] = { - &attr_throttle_count.attr, + &attr_core_throttle_count.attr, NULL }; -static struct attribute_group thermal_throttle_attr_group = { +static struct attribute_group thermal_attr_group = { .attrs = thermal_throttle_attrs, .name = "thermal_throttle" }; #endif /* CONFIG_SYSFS */ +#define CORE_LEVEL 0 +#define PACKAGE_LEVEL 1 + /*** * therm_throt_process - Process thermal throttling event from interrupt * @curr: Whether the condition is current or not (boolean), since the @@ -106,39 +130,70 @@ static struct attribute_group thermal_throttle_attr_group = { * 1 : Event should be logged further, and a message has been * printed to the syslog. */ -static int therm_throt_process(bool is_throttled) +static int therm_throt_process(bool new_event, int event, int level) { - struct thermal_state *state; - unsigned int this_cpu; - bool was_throttled; + struct _thermal_state *state; + unsigned int this_cpu = smp_processor_id(); + bool old_event; u64 now; + struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu); - this_cpu = smp_processor_id(); now = get_jiffies_64(); - state = &per_cpu(thermal_state, this_cpu); + if (level == CORE_LEVEL) { + if (event == THERMAL_THROTTLING_EVENT) + state = &pstate->core_throttle; + else if (event == POWER_LIMIT_EVENT) + state = &pstate->core_power_limit; + else + return 0; + } else if (level == PACKAGE_LEVEL) { + if (event == THERMAL_THROTTLING_EVENT) + state = &pstate->package_throttle; + else if (event == POWER_LIMIT_EVENT) + state = &pstate->package_power_limit; + else + return 0; + } else + return 0; - was_throttled = state->is_throttled; - state->is_throttled = is_throttled; + old_event = state->new_event; + state->new_event = new_event; - if (is_throttled) - state->throttle_count++; + if (new_event) + state->count++; if (time_before64(now, state->next_check) && - state->throttle_count != state->last_throttle_count) + state->count != state->last_count) return 0; state->next_check = now + CHECK_INTERVAL; - state->last_throttle_count = state->throttle_count; + state->last_count = state->count; /* if we just entered the thermal event */ - if (is_throttled) { - printk(KERN_CRIT "CPU%d: Temperature above threshold, cpu clock throttled (total events = %lu)\n", this_cpu, state->throttle_count); + if (new_event) { + if (event == THERMAL_THROTTLING_EVENT) + printk(KERN_CRIT "CPU%d: %s temperature above threshold, cpu clock throttled (total events = %lu)\n", + this_cpu, + level == CORE_LEVEL ? "Core" : "Package", + state->count); + else + printk(KERN_CRIT "CPU%d: %s power limit notification (total events = %lu)\n", + this_cpu, + level == CORE_LEVEL ? "Core" : "Package", + state->count); add_taint(TAINT_MACHINE_CHECK); return 1; } - if (was_throttled) { - printk(KERN_INFO "CPU%d: Temperature/speed normal\n", this_cpu); + if (old_event) { + if (event == THERMAL_THROTTLING_EVENT) + printk(KERN_INFO "CPU%d: %s temperature/speed normal\n", + this_cpu, + level == CORE_LEVEL ? "Core" : "Package"); + else + printk(KERN_INFO "CPU%d: %s power limit normal\n", + this_cpu, + level == CORE_LEVEL ? "Core" : "Package"); return 1; } @@ -149,13 +204,32 @@ static int therm_throt_process(bool is_throttled) /* Add/Remove thermal_throttle interface for CPU device: */ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev) { - return sysfs_create_group(&sys_dev->kobj, - &thermal_throttle_attr_group); + int err; + struct cpuinfo_x86 *c = &cpu_data(smp_processor_id()); + + err = sysfs_create_group(&sys_dev->kobj, &thermal_attr_group); + if (err) + return err; + + if (cpu_has(c, X86_FEATURE_PLN)) + err = sysfs_add_file_to_group(&sys_dev->kobj, + &attr_core_power_limit_count.attr, + thermal_attr_group.name); + if (cpu_has(c, X86_FEATURE_PTS)) + err = sysfs_add_file_to_group(&sys_dev->kobj, + &attr_package_throttle_count.attr, + thermal_attr_group.name); + if (cpu_has(c, X86_FEATURE_PLN)) + err = sysfs_add_file_to_group(&sys_dev->kobj, + &attr_package_power_limit_count.attr, + thermal_attr_group.name); + + return err; } static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev) { - sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group); + sysfs_remove_group(&sys_dev->kobj, &thermal_attr_group); } /* Mutex protecting device creation against CPU hotplug: */ @@ -226,14 +300,50 @@ device_initcall(thermal_throttle_init_device); #endif /* CONFIG_SYSFS */ +/* + * Set up the most two significant bit to notify mce log that this thermal + * event type. + * This is a temp solution. May be changed in the future with mce log + * infrasture. + */ +#define CORE_THROTTLED (0) +#define CORE_POWER_LIMIT ((__u64)1 << 62) +#define PACKAGE_THROTTLED ((__u64)2 << 62) +#define PACKAGE_POWER_LIMIT ((__u64)3 << 62) + /* Thermal transition interrupt handler */ static void intel_thermal_interrupt(void) { __u64 msr_val; + struct cpuinfo_x86 *c = &cpu_data(smp_processor_id()); rdmsrl(MSR_IA32_THERM_STATUS, msr_val); - if (therm_throt_process((msr_val & THERM_STATUS_PROCHOT) != 0)) - mce_log_therm_throt_event(msr_val); + + if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT, + THERMAL_THROTTLING_EVENT, + CORE_LEVEL) != 0) + mce_log_therm_throt_event(CORE_THROTTLED | msr_val); + + if (cpu_has(c, X86_FEATURE_PLN)) + if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT, + POWER_LIMIT_EVENT, + CORE_LEVEL) != 0) + mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val); + + if (cpu_has(c, X86_FEATURE_PTS)) { + rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val); + if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT, + THERMAL_THROTTLING_EVENT, + PACKAGE_LEVEL) != 0) + mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val); + if (cpu_has(c, X86_FEATURE_PLN)) + if (therm_throt_process(msr_val & + PACKAGE_THERM_STATUS_POWER_LIMIT, + POWER_LIMIT_EVENT, + PACKAGE_LEVEL) != 0) + mce_log_therm_throt_event(PACKAGE_POWER_LIMIT + | msr_val); + } } static void unexpected_thermal_interrupt(void) @@ -335,8 +445,26 @@ void intel_init_thermal(struct cpuinfo_x86 *c) apic_write(APIC_LVTTHMR, h); rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); - wrmsr(MSR_IA32_THERM_INTERRUPT, - l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h); + if (cpu_has(c, X86_FEATURE_PLN)) + wrmsr(MSR_IA32_THERM_INTERRUPT, + l | (THERM_INT_LOW_ENABLE + | THERM_INT_HIGH_ENABLE | THERM_INT_PLN_ENABLE), h); + else + wrmsr(MSR_IA32_THERM_INTERRUPT, + l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h); + + if (cpu_has(c, X86_FEATURE_PTS)) { + rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); + if (cpu_has(c, X86_FEATURE_PLN)) + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, + l | (PACKAGE_THERM_INT_LOW_ENABLE + | PACKAGE_THERM_INT_HIGH_ENABLE + | PACKAGE_THERM_INT_PLN_ENABLE), h); + else + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, + l | (PACKAGE_THERM_INT_LOW_ENABLE + | PACKAGE_THERM_INT_HIGH_ENABLE), h); + } smp_thermal_vector = intel_thermal_interrupt; diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index 16f41bbe46b6..d944bf6c50e9 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -18,6 +18,7 @@ #include <asm/mshyperv.h> struct ms_hyperv_info ms_hyperv; +EXPORT_SYMBOL_GPL(ms_hyperv); static bool __init ms_hyperv_platform(void) { diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c index 06130b52f012..c5f59d071425 100644 --- a/arch/x86/kernel/cpu/mtrr/cleanup.c +++ b/arch/x86/kernel/cpu/mtrr/cleanup.c @@ -632,9 +632,9 @@ static void __init mtrr_print_out_one_result(int i) unsigned long gran_base, chunk_base, lose_base; char gran_factor, chunk_factor, lose_factor; - gran_base = to_size_factor(result[i].gran_sizek, &gran_factor), - chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor), - lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor), + gran_base = to_size_factor(result[i].gran_sizek, &gran_factor); + chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor); + lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor); pr_info("%sgran_size: %ld%c \tchunk_size: %ld%c \t", result[i].bad ? "*BAD*" : " ", diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index fd31a441c61c..7d28d7d03885 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -433,13 +433,12 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, { unsigned int mask_lo, mask_hi, base_lo, base_hi; unsigned int tmp, hi; - int cpu; /* * get_mtrr doesn't need to update mtrr_state, also it could be called * from any cpu, so try to print it out directly. */ - cpu = get_cpu(); + get_cpu(); rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi); diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 79556bd9b602..01c0f3ee6cc3 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -35,6 +35,7 @@ #include <linux/types.h> /* FIXME: kvm_para.h needs this */ +#include <linux/stop_machine.h> #include <linux/kvm_para.h> #include <linux/uaccess.h> #include <linux/module.h> @@ -143,22 +144,28 @@ struct set_mtrr_data { mtrr_type smp_type; }; +static DEFINE_PER_CPU(struct cpu_stop_work, mtrr_work); + /** - * ipi_handler - Synchronisation handler. Executed by "other" CPUs. + * mtrr_work_handler - Synchronisation handler. Executed by "other" CPUs. * @info: pointer to mtrr configuration data * * Returns nothing. */ -static void ipi_handler(void *info) +static int mtrr_work_handler(void *info) { #ifdef CONFIG_SMP struct set_mtrr_data *data = info; unsigned long flags; + atomic_dec(&data->count); + while (!atomic_read(&data->gate)) + cpu_relax(); + local_irq_save(flags); atomic_dec(&data->count); - while (!atomic_read(&data->gate)) + while (atomic_read(&data->gate)) cpu_relax(); /* The master has cleared me to execute */ @@ -173,12 +180,13 @@ static void ipi_handler(void *info) } atomic_dec(&data->count); - while (atomic_read(&data->gate)) + while (!atomic_read(&data->gate)) cpu_relax(); atomic_dec(&data->count); local_irq_restore(flags); #endif + return 0; } static inline int types_compatible(mtrr_type type1, mtrr_type type2) @@ -198,7 +206,7 @@ static inline int types_compatible(mtrr_type type1, mtrr_type type2) * * This is kinda tricky, but fortunately, Intel spelled it out for us cleanly: * - * 1. Send IPI to do the following: + * 1. Queue work to do the following on all processors: * 2. Disable Interrupts * 3. Wait for all procs to do so * 4. Enter no-fill cache mode @@ -215,14 +223,17 @@ static inline int types_compatible(mtrr_type type1, mtrr_type type2) * 15. Enable interrupts. * * What does that mean for us? Well, first we set data.count to the number - * of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait - * until it hits 0 and proceed. We set the data.gate flag and reset data.count. - * Meanwhile, they are waiting for that flag to be set. Once it's set, each + * of CPUs. As each CPU announces that it started the rendezvous handler by + * decrementing the count, We reset data.count and set the data.gate flag + * allowing all the cpu's to proceed with the work. As each cpu disables + * interrupts, it'll decrement data.count once. We wait until it hits 0 and + * proceed. We clear the data.gate flag and reset data.count. Meanwhile, they + * are waiting for that flag to be cleared. Once it's cleared, each * CPU goes through the transition of updating MTRRs. * The CPU vendors may each do it differently, * so we call mtrr_if->set() callback and let them take care of it. * When they're done, they again decrement data->count and wait for data.gate - * to be reset. + * to be set. * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag * Everyone then enables interrupts and we all continue on. * @@ -234,6 +245,9 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ { struct set_mtrr_data data; unsigned long flags; + int cpu; + + preempt_disable(); data.smp_reg = reg; data.smp_base = base; @@ -246,10 +260,15 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ atomic_set(&data.gate, 0); /* Start the ball rolling on other CPUs */ - if (smp_call_function(ipi_handler, &data, 0) != 0) - panic("mtrr: timed out waiting for other CPUs\n"); + for_each_online_cpu(cpu) { + struct cpu_stop_work *work = &per_cpu(mtrr_work, cpu); + + if (cpu == smp_processor_id()) + continue; + + stop_one_cpu_nowait(cpu, mtrr_work_handler, &data, work); + } - local_irq_save(flags); while (atomic_read(&data.count)) cpu_relax(); @@ -259,6 +278,16 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ smp_wmb(); atomic_set(&data.gate, 1); + local_irq_save(flags); + + while (atomic_read(&data.count)) + cpu_relax(); + + /* Ok, reset count and toggle gate */ + atomic_set(&data.count, num_booting_cpus() - 1); + smp_wmb(); + atomic_set(&data.gate, 0); + /* Do our MTRR business */ /* @@ -279,7 +308,7 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ atomic_set(&data.count, num_booting_cpus() - 1); smp_wmb(); - atomic_set(&data.gate, 0); + atomic_set(&data.gate, 1); /* * Wait here for everyone to have seen the gate change @@ -289,6 +318,7 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ cpu_relax(); local_irq_restore(flags); + preempt_enable(); } /** diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 5db5b7d65a18..f2da20fda02d 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -220,6 +220,7 @@ struct x86_pmu { struct perf_event *event); struct event_constraint *event_constraints; void (*quirks)(void); + int perfctr_second_write; int (*cpu_prepare)(int cpu); void (*cpu_starting)(int cpu); @@ -295,10 +296,10 @@ x86_perf_event_update(struct perf_event *event) * count to the generic event atomically: */ again: - prev_raw_count = atomic64_read(&hwc->prev_count); + prev_raw_count = local64_read(&hwc->prev_count); rdmsrl(hwc->event_base + idx, new_raw_count); - if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count, + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, new_raw_count) != prev_raw_count) goto again; @@ -313,8 +314,8 @@ again: delta = (new_raw_count << shift) - (prev_raw_count << shift); delta >>= shift; - atomic64_add(delta, &event->count); - atomic64_sub(delta, &hwc->period_left); + local64_add(delta, &event->count); + local64_sub(delta, &hwc->period_left); return new_raw_count; } @@ -438,7 +439,7 @@ static int x86_setup_perfctr(struct perf_event *event) if (!hwc->sample_period) { hwc->sample_period = x86_pmu.max_period; hwc->last_period = hwc->sample_period; - atomic64_set(&hwc->period_left, hwc->sample_period); + local64_set(&hwc->period_left, hwc->sample_period); } else { /* * If we have a PMU initialized but no APIC @@ -885,7 +886,7 @@ static int x86_perf_event_set_period(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; - s64 left = atomic64_read(&hwc->period_left); + s64 left = local64_read(&hwc->period_left); s64 period = hwc->sample_period; int ret = 0, idx = hwc->idx; @@ -897,14 +898,14 @@ x86_perf_event_set_period(struct perf_event *event) */ if (unlikely(left <= -period)) { left = period; - atomic64_set(&hwc->period_left, left); + local64_set(&hwc->period_left, left); hwc->last_period = period; ret = 1; } if (unlikely(left <= 0)) { left += period; - atomic64_set(&hwc->period_left, left); + local64_set(&hwc->period_left, left); hwc->last_period = period; ret = 1; } @@ -923,10 +924,19 @@ x86_perf_event_set_period(struct perf_event *event) * The hw event starts counting from this event offset, * mark it to be able to extra future deltas: */ - atomic64_set(&hwc->prev_count, (u64)-left); + local64_set(&hwc->prev_count, (u64)-left); - wrmsrl(hwc->event_base + idx, + wrmsrl(hwc->event_base + idx, (u64)(-left) & x86_pmu.cntval_mask); + + /* + * Due to erratum on certan cpu we need + * a second write to be sure the register + * is updated properly + */ + if (x86_pmu.perfctr_second_write) { + wrmsrl(hwc->event_base + idx, (u64)(-left) & x86_pmu.cntval_mask); + } perf_event_update_userpage(event); @@ -969,7 +979,7 @@ static int x86_pmu_enable(struct perf_event *event) * skip the schedulability test here, it will be peformed * at commit time(->commit_txn) as a whole */ - if (cpuc->group_flag & PERF_EVENT_TXN_STARTED) + if (cpuc->group_flag & PERF_EVENT_TXN) goto out; ret = x86_pmu.schedule_events(cpuc, n, assign); @@ -1096,7 +1106,7 @@ static void x86_pmu_disable(struct perf_event *event) * The events never got scheduled and ->cancel_txn will truncate * the event_list. */ - if (cpuc->group_flag & PERF_EVENT_TXN_STARTED) + if (cpuc->group_flag & PERF_EVENT_TXN) return; x86_pmu_stop(event); @@ -1388,7 +1398,7 @@ static void x86_pmu_start_txn(const struct pmu *pmu) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - cpuc->group_flag |= PERF_EVENT_TXN_STARTED; + cpuc->group_flag |= PERF_EVENT_TXN; cpuc->n_txn = 0; } @@ -1401,7 +1411,7 @@ static void x86_pmu_cancel_txn(const struct pmu *pmu) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - cpuc->group_flag &= ~PERF_EVENT_TXN_STARTED; + cpuc->group_flag &= ~PERF_EVENT_TXN; /* * Truncate the collected events. */ @@ -1435,11 +1445,7 @@ static int x86_pmu_commit_txn(const struct pmu *pmu) */ memcpy(cpuc->assign, assign, n*sizeof(int)); - /* - * Clear out the txn count so that ->cancel_txn() which gets - * run after ->commit_txn() doesn't undo things. - */ - cpuc->n_txn = 0; + cpuc->group_flag &= ~PERF_EVENT_TXN; return 0; } @@ -1607,8 +1613,6 @@ static const struct stacktrace_ops backtrace_ops = { .walk_stack = print_context_stack_bp, }; -#include "../dumpstack.h" - static void perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry) { @@ -1730,22 +1734,6 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs) return entry; } -void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip) -{ - regs->ip = ip; - /* - * perf_arch_fetch_caller_regs adds another call, we need to increment - * the skip level - */ - regs->bp = rewind_frame_pointer(skip + 1); - regs->cs = __KERNEL_CS; - /* - * We abuse bit 3 to pass exact information, see perf_misc_flags - * and the comment with PERF_EFLAGS_EXACT. - */ - regs->flags = 0; -} - unsigned long perf_instruction_pointer(struct pt_regs *regs) { unsigned long ip; diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index ae85d69644d1..107711bf0ee8 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -21,22 +21,36 @@ struct p4_event_bind { char cntr[2][P4_CNTR_LIMIT]; /* counter index (offset), -1 on abscence */ }; -struct p4_cache_event_bind { +struct p4_pebs_bind { unsigned int metric_pebs; unsigned int metric_vert; }; -#define P4_GEN_CACHE_EVENT_BIND(name) \ - [P4_CACHE__##name] = { \ - .metric_pebs = P4_PEBS__##name, \ - .metric_vert = P4_VERT__##name, \ +/* it sets P4_PEBS_ENABLE_UOP_TAG as well */ +#define P4_GEN_PEBS_BIND(name, pebs, vert) \ + [P4_PEBS_METRIC__##name] = { \ + .metric_pebs = pebs | P4_PEBS_ENABLE_UOP_TAG, \ + .metric_vert = vert, \ } -static struct p4_cache_event_bind p4_cache_event_bind_map[] = { - P4_GEN_CACHE_EVENT_BIND(1stl_cache_load_miss_retired), - P4_GEN_CACHE_EVENT_BIND(2ndl_cache_load_miss_retired), - P4_GEN_CACHE_EVENT_BIND(dtlb_load_miss_retired), - P4_GEN_CACHE_EVENT_BIND(dtlb_store_miss_retired), +/* + * note we have P4_PEBS_ENABLE_UOP_TAG always set here + * + * it's needed for mapping P4_PEBS_CONFIG_METRIC_MASK bits of + * event configuration to find out which values are to be + * written into MSR_IA32_PEBS_ENABLE and MSR_P4_PEBS_MATRIX_VERT + * resgisters + */ +static struct p4_pebs_bind p4_pebs_bind_map[] = { + P4_GEN_PEBS_BIND(1stl_cache_load_miss_retired, 0x0000001, 0x0000001), + P4_GEN_PEBS_BIND(2ndl_cache_load_miss_retired, 0x0000002, 0x0000001), + P4_GEN_PEBS_BIND(dtlb_load_miss_retired, 0x0000004, 0x0000001), + P4_GEN_PEBS_BIND(dtlb_store_miss_retired, 0x0000004, 0x0000002), + P4_GEN_PEBS_BIND(dtlb_all_miss_retired, 0x0000004, 0x0000003), + P4_GEN_PEBS_BIND(tagged_mispred_branch, 0x0018000, 0x0000010), + P4_GEN_PEBS_BIND(mob_load_replay_retired, 0x0000200, 0x0000001), + P4_GEN_PEBS_BIND(split_load_retired, 0x0000400, 0x0000001), + P4_GEN_PEBS_BIND(split_store_retired, 0x0000400, 0x0000002), }; /* @@ -281,10 +295,10 @@ static struct p4_event_bind p4_event_bind_map[] = { }, }; -#define P4_GEN_CACHE_EVENT(event, bit, cache_event) \ +#define P4_GEN_CACHE_EVENT(event, bit, metric) \ p4_config_pack_escr(P4_ESCR_EVENT(event) | \ P4_ESCR_EMASK_BIT(event, bit)) | \ - p4_config_pack_cccr(cache_event | \ + p4_config_pack_cccr(metric | \ P4_CCCR_ESEL(P4_OPCODE_ESEL(P4_OPCODE(event)))) static __initconst const u64 p4_hw_cache_event_ids @@ -296,34 +310,34 @@ static __initconst const u64 p4_hw_cache_event_ids [ C(OP_READ) ] = { [ C(RESULT_ACCESS) ] = 0x0, [ C(RESULT_MISS) ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS, - P4_CACHE__1stl_cache_load_miss_retired), + P4_PEBS_METRIC__1stl_cache_load_miss_retired), }, }, [ C(LL ) ] = { [ C(OP_READ) ] = { [ C(RESULT_ACCESS) ] = 0x0, [ C(RESULT_MISS) ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS, - P4_CACHE__2ndl_cache_load_miss_retired), + P4_PEBS_METRIC__2ndl_cache_load_miss_retired), }, }, [ C(DTLB) ] = { [ C(OP_READ) ] = { [ C(RESULT_ACCESS) ] = 0x0, [ C(RESULT_MISS) ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS, - P4_CACHE__dtlb_load_miss_retired), + P4_PEBS_METRIC__dtlb_load_miss_retired), }, [ C(OP_WRITE) ] = { [ C(RESULT_ACCESS) ] = 0x0, [ C(RESULT_MISS) ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS, - P4_CACHE__dtlb_store_miss_retired), + P4_PEBS_METRIC__dtlb_store_miss_retired), }, }, [ C(ITLB) ] = { [ C(OP_READ) ] = { [ C(RESULT_ACCESS) ] = P4_GEN_CACHE_EVENT(P4_EVENT_ITLB_REFERENCE, HIT, - P4_CACHE__itlb_reference_hit), + P4_PEBS_METRIC__none), [ C(RESULT_MISS) ] = P4_GEN_CACHE_EVENT(P4_EVENT_ITLB_REFERENCE, MISS, - P4_CACHE__itlb_reference_miss), + P4_PEBS_METRIC__none), }, [ C(OP_WRITE) ] = { [ C(RESULT_ACCESS) ] = -1, @@ -414,11 +428,37 @@ static u64 p4_pmu_event_map(int hw_event) return config; } +static int p4_validate_raw_event(struct perf_event *event) +{ + unsigned int v; + + /* user data may have out-of-bound event index */ + v = p4_config_unpack_event(event->attr.config); + if (v >= ARRAY_SIZE(p4_event_bind_map)) { + pr_warning("P4 PMU: Unknown event code: %d\n", v); + return -EINVAL; + } + + /* + * it may have some screwed PEBS bits + */ + if (p4_config_pebs_has(event->attr.config, P4_PEBS_CONFIG_ENABLE)) { + pr_warning("P4 PMU: PEBS are not supported yet\n"); + return -EINVAL; + } + v = p4_config_unpack_metric(event->attr.config); + if (v >= ARRAY_SIZE(p4_pebs_bind_map)) { + pr_warning("P4 PMU: Unknown metric code: %d\n", v); + return -EINVAL; + } + + return 0; +} + static int p4_hw_config(struct perf_event *event) { int cpu = get_cpu(); int rc = 0; - unsigned int evnt; u32 escr, cccr; /* @@ -438,12 +478,9 @@ static int p4_hw_config(struct perf_event *event) if (event->attr.type == PERF_TYPE_RAW) { - /* user data may have out-of-bound event index */ - evnt = p4_config_unpack_event(event->attr.config); - if (evnt >= ARRAY_SIZE(p4_event_bind_map)) { - rc = -EINVAL; + rc = p4_validate_raw_event(event); + if (rc) goto out; - } /* * We don't control raw events so it's up to the caller @@ -451,12 +488,15 @@ static int p4_hw_config(struct perf_event *event) * on HT machine but allow HT-compatible specifics to be * passed on) * + * Note that for RAW events we allow user to use P4_CCCR_RESERVED + * bits since we keep additional info here (for cache events and etc) + * * XXX: HT wide things should check perf_paranoid_cpu() && * CAP_SYS_ADMIN */ event->hw.config |= event->attr.config & (p4_config_pack_escr(P4_ESCR_MASK_HT) | - p4_config_pack_cccr(P4_CCCR_MASK_HT)); + p4_config_pack_cccr(P4_CCCR_MASK_HT | P4_CCCR_RESERVED)); } rc = x86_setup_perfctr(event); @@ -482,6 +522,29 @@ static inline int p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc) return overflow; } +static void p4_pmu_disable_pebs(void) +{ + /* + * FIXME + * + * It's still allowed that two threads setup same cache + * events so we can't simply clear metrics until we knew + * noone is depending on us, so we need kind of counter + * for "ReplayEvent" users. + * + * What is more complex -- RAW events, if user (for some + * reason) will pass some cache event metric with improper + * event opcode -- it's fine from hardware point of view + * but completely nonsence from "meaning" of such action. + * + * So at moment let leave metrics turned on forever -- it's + * ok for now but need to be revisited! + * + * (void)checking_wrmsrl(MSR_IA32_PEBS_ENABLE, (u64)0); + * (void)checking_wrmsrl(MSR_P4_PEBS_MATRIX_VERT, (u64)0); + */ +} + static inline void p4_pmu_disable_event(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; @@ -507,6 +570,26 @@ static void p4_pmu_disable_all(void) continue; p4_pmu_disable_event(event); } + + p4_pmu_disable_pebs(); +} + +/* configuration must be valid */ +static void p4_pmu_enable_pebs(u64 config) +{ + struct p4_pebs_bind *bind; + unsigned int idx; + + BUILD_BUG_ON(P4_PEBS_METRIC__max > P4_PEBS_CONFIG_METRIC_MASK); + + idx = p4_config_unpack_metric(config); + if (idx == P4_PEBS_METRIC__none) + return; + + bind = &p4_pebs_bind_map[idx]; + + (void)checking_wrmsrl(MSR_IA32_PEBS_ENABLE, (u64)bind->metric_pebs); + (void)checking_wrmsrl(MSR_P4_PEBS_MATRIX_VERT, (u64)bind->metric_vert); } static void p4_pmu_enable_event(struct perf_event *event) @@ -515,9 +598,7 @@ static void p4_pmu_enable_event(struct perf_event *event) int thread = p4_ht_config_thread(hwc->config); u64 escr_conf = p4_config_unpack_escr(p4_clear_ht_bit(hwc->config)); unsigned int idx = p4_config_unpack_event(hwc->config); - unsigned int idx_cache = p4_config_unpack_cache_event(hwc->config); struct p4_event_bind *bind; - struct p4_cache_event_bind *bind_cache; u64 escr_addr, cccr; bind = &p4_event_bind_map[idx]; @@ -537,16 +618,10 @@ static void p4_pmu_enable_event(struct perf_event *event) cccr = p4_config_unpack_cccr(hwc->config); /* - * it could be Cache event so that we need to - * set metrics into additional MSRs + * it could be Cache event so we need to write metrics + * into additional MSRs */ - BUILD_BUG_ON(P4_CACHE__MAX > P4_CCCR_CACHE_OPS_MASK); - if (idx_cache > P4_CACHE__NONE && - idx_cache < ARRAY_SIZE(p4_cache_event_bind_map)) { - bind_cache = &p4_cache_event_bind_map[idx_cache]; - (void)checking_wrmsrl(MSR_IA32_PEBS_ENABLE, (u64)bind_cache->metric_pebs); - (void)checking_wrmsrl(MSR_P4_PEBS_MATRIX_VERT, (u64)bind_cache->metric_vert); - } + p4_pmu_enable_pebs(hwc->config); (void)checking_wrmsrl(escr_addr, escr_conf); (void)checking_wrmsrl(hwc->config_base + hwc->idx, @@ -829,6 +904,15 @@ static __initconst const struct x86_pmu p4_pmu = { .max_period = (1ULL << 39) - 1, .hw_config = p4_hw_config, .schedule_events = p4_pmu_schedule_events, + /* + * This handles erratum N15 in intel doc 249199-029, + * the counter may not be updated correctly on write + * so we need a second write operation to do the trick + * (the official workaround didn't work) + * + * the former idea is taken from OProfile code + */ + .perfctr_second_write = 1, }; static __init int p4_pmu_init(void) diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c new file mode 100644 index 000000000000..34b4dad6f0b8 --- /dev/null +++ b/arch/x86/kernel/cpu/scattered.c @@ -0,0 +1,63 @@ +/* + * Routines to indentify additional cpu features that are scattered in + * cpuid space. + */ +#include <linux/cpu.h> + +#include <asm/pat.h> +#include <asm/processor.h> + +#include <asm/apic.h> + +struct cpuid_bit { + u16 feature; + u8 reg; + u8 bit; + u32 level; + u32 sub_leaf; +}; + +enum cpuid_regs { + CR_EAX = 0, + CR_ECX, + CR_EDX, + CR_EBX +}; + +void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) +{ + u32 max_level; + u32 regs[4]; + const struct cpuid_bit *cb; + + static const struct cpuid_bit __cpuinitconst cpuid_bits[] = { + { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006, 0 }, + { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 }, + { X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 }, + { X86_FEATURE_PTS, CR_EAX, 6, 0x00000006, 0 }, + { X86_FEATURE_APERFMPERF, CR_ECX, 0, 0x00000006, 0 }, + { X86_FEATURE_EPB, CR_ECX, 3, 0x00000006, 0 }, + { X86_FEATURE_XSAVEOPT, CR_EAX, 0, 0x0000000d, 1 }, + { X86_FEATURE_CPB, CR_EDX, 9, 0x80000007, 0 }, + { X86_FEATURE_NPT, CR_EDX, 0, 0x8000000a, 0 }, + { X86_FEATURE_LBRV, CR_EDX, 1, 0x8000000a, 0 }, + { X86_FEATURE_SVML, CR_EDX, 2, 0x8000000a, 0 }, + { X86_FEATURE_NRIPS, CR_EDX, 3, 0x8000000a, 0 }, + { 0, 0, 0, 0, 0 } + }; + + for (cb = cpuid_bits; cb->feature; cb++) { + + /* Verify that the level is valid */ + max_level = cpuid_eax(cb->level & 0xffff0000); + if (max_level < cb->level || + max_level > (cb->level | 0xffff)) + continue; + + cpuid_count(cb->level, cb->sub_leaf, ®s[CR_EAX], + ®s[CR_EBX], ®s[CR_ECX], ®s[CR_EDX]); + + if (regs[cb->reg] & (1 << cb->bit)) + set_cpu_cap(c, cb->feature); + } +} diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/topology.c index 10fa5684a662..4397e987a1cf 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/topology.c @@ -1,62 +1,14 @@ /* - * Routines to indentify additional cpu features that are scattered in - * cpuid space. + * Check for extended topology enumeration cpuid leaf 0xb and if it + * exists, use it for populating initial_apicid and cpu topology + * detection. */ -#include <linux/cpu.h> +#include <linux/cpu.h> +#include <asm/apic.h> #include <asm/pat.h> #include <asm/processor.h> -#include <asm/apic.h> - -struct cpuid_bit { - u16 feature; - u8 reg; - u8 bit; - u32 level; -}; - -enum cpuid_regs { - CR_EAX = 0, - CR_ECX, - CR_EDX, - CR_EBX -}; - -void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) -{ - u32 max_level; - u32 regs[4]; - const struct cpuid_bit *cb; - - static const struct cpuid_bit __cpuinitconst cpuid_bits[] = { - { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 }, - { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006 }, - { X86_FEATURE_APERFMPERF, CR_ECX, 0, 0x00000006 }, - { X86_FEATURE_CPB, CR_EDX, 9, 0x80000007 }, - { X86_FEATURE_NPT, CR_EDX, 0, 0x8000000a }, - { X86_FEATURE_LBRV, CR_EDX, 1, 0x8000000a }, - { X86_FEATURE_SVML, CR_EDX, 2, 0x8000000a }, - { X86_FEATURE_NRIPS, CR_EDX, 3, 0x8000000a }, - { 0, 0, 0, 0 } - }; - - for (cb = cpuid_bits; cb->feature; cb++) { - - /* Verify that the level is valid */ - max_level = cpuid_eax(cb->level & 0xffff0000); - if (max_level < cb->level || - max_level > (cb->level | 0xffff)) - continue; - - cpuid(cb->level, ®s[CR_EAX], ®s[CR_EBX], - ®s[CR_ECX], ®s[CR_EDX]); - - if (regs[cb->reg] & (1 << cb->bit)) - set_cpu_cap(c, cb->feature); - } -} - /* leaf 0xb SMT level */ #define SMT_LEVEL 0 diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c index b9d1ff588445..227b0448960d 100644 --- a/arch/x86/kernel/cpu/vmware.c +++ b/arch/x86/kernel/cpu/vmware.c @@ -51,7 +51,7 @@ static inline int __vmware_platform(void) static unsigned long vmware_get_tsc_khz(void) { - uint64_t tsc_hz; + uint64_t tsc_hz, lpj; uint32_t eax, ebx, ecx, edx; VMWARE_PORT(GETHZ, eax, ebx, ecx, edx); @@ -62,6 +62,13 @@ static unsigned long vmware_get_tsc_khz(void) printk(KERN_INFO "TSC freq read from hypervisor : %lu.%03lu MHz\n", (unsigned long) tsc_hz / 1000, (unsigned long) tsc_hz % 1000); + + if (!preset_lpj) { + lpj = ((u64)tsc_hz * 1000); + do_div(lpj, HZ); + preset_lpj = lpj; + } + return tsc_hz; } diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index c89a386930b7..6e8752c1bd52 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -18,7 +18,6 @@ #include <asm/stacktrace.h> -#include "dumpstack.h" int panic_on_unrecovered_nmi; int panic_on_io_nmi; diff --git a/arch/x86/kernel/dumpstack.h b/arch/x86/kernel/dumpstack.h deleted file mode 100644 index e1a93be4fd44..000000000000 --- a/arch/x86/kernel/dumpstack.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs - */ - -#ifndef DUMPSTACK_H -#define DUMPSTACK_H - -#ifdef CONFIG_X86_32 -#define STACKSLOTS_PER_LINE 8 -#define get_bp(bp) asm("movl %%ebp, %0" : "=r" (bp) :) -#else -#define STACKSLOTS_PER_LINE 4 -#define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :) -#endif - -#include <linux/uaccess.h> - -extern void -show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *stack, unsigned long bp, char *log_lvl); - -extern void -show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, - unsigned long *sp, unsigned long bp, char *log_lvl); - -extern unsigned int code_bytes; - -/* The form of the top of the frame on the stack */ -struct stack_frame { - struct stack_frame *next_frame; - unsigned long return_address; -}; - -struct stack_frame_ia32 { - u32 next_frame; - u32 return_address; -}; - -static inline unsigned long rewind_frame_pointer(int n) -{ - struct stack_frame *frame; - - get_bp(frame); - -#ifdef CONFIG_FRAME_POINTER - while (n--) { - if (probe_kernel_address(&frame->next_frame, frame)) - break; - } -#endif - - return (unsigned long)frame; -} - -#endif /* DUMPSTACK_H */ diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c index 11540a189d93..0f6376ffa2d9 100644 --- a/arch/x86/kernel/dumpstack_32.c +++ b/arch/x86/kernel/dumpstack_32.c @@ -16,8 +16,6 @@ #include <asm/stacktrace.h> -#include "dumpstack.h" - void dump_trace(struct task_struct *task, struct pt_regs *regs, unsigned long *stack, unsigned long bp, diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 272c9f1f05f3..57a21f11c791 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -16,7 +16,6 @@ #include <asm/stacktrace.h> -#include "dumpstack.h" #define N_EXCEPTION_STACKS_END \ (N_EXCEPTION_STACKS + DEBUG_STKSZ/EXCEPTION_STKSZ - 2) diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index cd49141cf153..227d00920d2f 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -611,14 +611,14 @@ ldt_ss: * compensating for the offset by changing to the ESPFIX segment with * a base address that matches for the difference. */ +#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8) mov %esp, %edx /* load kernel esp */ mov PT_OLDESP(%esp), %eax /* load userspace esp */ mov %dx, %ax /* eax: new kernel esp */ sub %eax, %edx /* offset (low word is 0) */ - PER_CPU(gdt_page, %ebx) shr $16, %edx - mov %dl, GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx) /* bits 16..23 */ - mov %dh, GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx) /* bits 24..31 */ + mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */ + mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */ pushl $__ESPFIX_SS CFI_ADJUST_CFA_OFFSET 4 push %eax /* new kernel esp */ @@ -791,9 +791,8 @@ ptregs_clone: * normal stack and adjusts ESP with the matching offset. */ /* fixup the stack */ - PER_CPU(gdt_page, %ebx) - mov GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx), %al /* bits 16..23 */ - mov GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx), %ah /* bits 24..31 */ + mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */ + mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */ shl $16, %eax addl %esp, %eax /* the adjusted stack pointer */ pushl $__KERNEL_DS @@ -914,7 +913,7 @@ ENTRY(simd_coprocessor_error) .balign 4 .long 661b .long 663f - .byte X86_FEATURE_XMM + .word X86_FEATURE_XMM .byte 662b-661b .byte 664f-663f .previous @@ -1166,6 +1165,9 @@ ENTRY(xen_failsafe_callback) .previous ENDPROC(xen_failsafe_callback) +BUILD_INTERRUPT3(xen_hvm_callback_vector, XEN_HVM_EVTCHN_CALLBACK, + xen_evtchn_do_upcall) + #endif /* CONFIG_XEN */ #ifdef CONFIG_FUNCTION_TRACER diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 4db7c4d12ffa..c5ea5cdbe7b3 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1065,6 +1065,7 @@ ENTRY(\sym) END(\sym) .endm +#define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8) .macro paranoidzeroentry_ist sym do_sym ist ENTRY(\sym) INTR_FRAME @@ -1076,10 +1077,9 @@ ENTRY(\sym) TRACE_IRQS_OFF movq %rsp,%rdi /* pt_regs pointer */ xorl %esi,%esi /* no error code */ - PER_CPU(init_tss, %r12) - subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%r12) + subq $EXCEPTION_STKSZ, INIT_TSS_IST(\ist) call \do_sym - addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%r12) + addq $EXCEPTION_STKSZ, INIT_TSS_IST(\ist) jmp paranoid_exit /* %ebx: no swapgs flag */ CFI_ENDPROC END(\sym) @@ -1329,6 +1329,9 @@ ENTRY(xen_failsafe_callback) CFI_ENDPROC END(xen_failsafe_callback) +apicinterrupt XEN_HVM_EVTCHN_CALLBACK \ + xen_hvm_callback_vector xen_evtchn_do_upcall + #endif /* CONFIG_XEN */ /* diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 37c3d4b17d85..ff4c453e13f3 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -131,6 +131,12 @@ ENTRY(startup_32) movsl 1: +#ifdef CONFIG_OLPC_OPENFIRMWARE + /* save OFW's pgdir table for later use when calling into OFW */ + movl %cr3, %eax + movl %eax, pa(olpc_ofw_pgd) +#endif + #ifdef CONFIG_PARAVIRT /* This is can only trip for a broken bootloader... */ cmpw $0x207, pa(boot_params + BP_version) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 3d1e6f16b7a6..239046bd447f 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -234,9 +234,8 @@ ENTRY(secondary_startup_64) * init data section till per cpu areas are set up. */ movl $MSR_GS_BASE,%ecx - movq initial_gs(%rip),%rax - movq %rax,%rdx - shrq $32,%rdx + movl initial_gs(%rip),%eax + movl initial_gs+4(%rip),%edx wrmsr /* esi is pointer to real mode structure with interesting info. diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ba390d731175..33dbcc4ec5ff 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -16,7 +16,6 @@ #include <asm/hpet.h> #define HPET_MASK CLOCKSOURCE_MASK(32) -#define HPET_SHIFT 22 /* FSEC = 10^-15 NSEC = 10^-9 */ @@ -787,7 +786,6 @@ static struct clocksource clocksource_hpet = { .rating = 250, .read = read_hpet, .mask = HPET_MASK, - .shift = HPET_SHIFT, .flags = CLOCK_SOURCE_IS_CONTINUOUS, .resume = hpet_resume_counter, #ifdef CONFIG_X86_64 @@ -798,6 +796,7 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { u64 start, now; + u64 hpet_freq; cycle_t t1; /* Start the counter */ @@ -832,9 +831,15 @@ static int hpet_clocksource_register(void) * mult = (hpet_period * 2^shift)/10^6 * mult = (hpet_period << shift)/FSEC_PER_NSEC */ - clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); - clocksource_register(&clocksource_hpet); + /* Need to convert hpet_period (fsec/cyc) to cyc/sec: + * + * cyc/sec = FSEC_PER_SEC/hpet_period(fsec/cyc) + * cyc/sec = (FSEC_PER_NSEC * NSEC_PER_SEC)/hpet_period + */ + hpet_freq = FSEC_PER_NSEC * NSEC_PER_SEC; + do_div(hpet_freq, hpet_period); + clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq); return 0; } diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c index a8f1b803d2fd..a474ec37c32f 100644 --- a/arch/x86/kernel/hw_breakpoint.c +++ b/arch/x86/kernel/hw_breakpoint.c @@ -208,6 +208,9 @@ int arch_bp_generic_fields(int x86_len, int x86_type, { /* Len */ switch (x86_len) { + case X86_BREAKPOINT_LEN_X: + *gen_len = sizeof(long); + break; case X86_BREAKPOINT_LEN_1: *gen_len = HW_BREAKPOINT_LEN_1; break; @@ -251,6 +254,29 @@ static int arch_build_bp_info(struct perf_event *bp) info->address = bp->attr.bp_addr; + /* Type */ + switch (bp->attr.bp_type) { + case HW_BREAKPOINT_W: + info->type = X86_BREAKPOINT_WRITE; + break; + case HW_BREAKPOINT_W | HW_BREAKPOINT_R: + info->type = X86_BREAKPOINT_RW; + break; + case HW_BREAKPOINT_X: + info->type = X86_BREAKPOINT_EXECUTE; + /* + * x86 inst breakpoints need to have a specific undefined len. + * But we still need to check userspace is not trying to setup + * an unsupported length, to get a range breakpoint for example. + */ + if (bp->attr.bp_len == sizeof(long)) { + info->len = X86_BREAKPOINT_LEN_X; + return 0; + } + default: + return -EINVAL; + } + /* Len */ switch (bp->attr.bp_len) { case HW_BREAKPOINT_LEN_1: @@ -271,21 +297,6 @@ static int arch_build_bp_info(struct perf_event *bp) return -EINVAL; } - /* Type */ - switch (bp->attr.bp_type) { - case HW_BREAKPOINT_W: - info->type = X86_BREAKPOINT_WRITE; - break; - case HW_BREAKPOINT_W | HW_BREAKPOINT_R: - info->type = X86_BREAKPOINT_RW; - break; - case HW_BREAKPOINT_X: - info->type = X86_BREAKPOINT_EXECUTE; - break; - default: - return -EINVAL; - } - return 0; } /* @@ -305,6 +316,9 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) ret = -EINVAL; switch (info->len) { + case X86_BREAKPOINT_LEN_X: + align = sizeof(long) -1; + break; case X86_BREAKPOINT_LEN_1: align = 0; break; @@ -466,6 +480,13 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args) perf_bp_event(bp, args->regs); + /* + * Set up resume flag to avoid breakpoint recursion when + * returning back to origin. + */ + if (bp->hw.info.type == X86_BREAKPOINT_EXECUTE) + args->regs->flags |= X86_EFLAGS_RF; + rcu_read_unlock(); } /* diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index c4444bce8469..1f11f5ce668f 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -59,18 +59,18 @@ void __cpuinit mxcsr_feature_mask_init(void) stts(); } -void __cpuinit init_thread_xstate(void) +static void __cpuinit init_thread_xstate(void) { + /* + * Note that xstate_size might be overwriten later during + * xsave_init(). + */ + if (!HAVE_HWFP) { xstate_size = sizeof(struct i387_soft_struct); return; } - if (cpu_has_xsave) { - xsave_cntxt_init(); - return; - } - if (cpu_has_fxsr) xstate_size = sizeof(struct i387_fxsave_struct); #ifdef CONFIG_X86_32 @@ -84,6 +84,7 @@ void __cpuinit init_thread_xstate(void) * Called at bootup to set up the initial FPU state that is later cloned * into all processes. */ + void __cpuinit fpu_init(void) { unsigned long oldcr0 = read_cr0(); @@ -93,19 +94,24 @@ void __cpuinit fpu_init(void) write_cr0(oldcr0 & ~(X86_CR0_TS|X86_CR0_EM)); /* clear TS and EM */ - /* - * Boot processor to setup the FP and extended state context info. - */ if (!smp_processor_id()) init_thread_xstate(); - xsave_init(); mxcsr_feature_mask_init(); /* clean state in init */ current_thread_info()->status = 0; clear_used_math(); } -#endif /* CONFIG_X86_64 */ + +#else /* CONFIG_X86_64 */ + +void __cpuinit fpu_init(void) +{ + if (!smp_processor_id()) + init_thread_xstate(); +} + +#endif /* CONFIG_X86_32 */ void fpu_finit(struct fpu *fpu) { @@ -191,6 +197,8 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset, if (ret) return ret; + sanitize_i387_state(target); + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.fpu.state->fxsave, 0, -1); } @@ -208,6 +216,8 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset, if (ret) return ret; + sanitize_i387_state(target); + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &target->thread.fpu.state->fxsave, 0, -1); @@ -447,6 +457,8 @@ int fpregs_get(struct task_struct *target, const struct user_regset *regset, -1); } + sanitize_i387_state(target); + if (kbuf && pos == 0 && count == sizeof(env)) { convert_from_fxsr(kbuf, target); return 0; @@ -468,6 +480,8 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset, if (ret) return ret; + sanitize_i387_state(target); + if (!HAVE_HWFP) return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf); @@ -534,6 +548,9 @@ static int save_i387_xsave(void __user *buf) struct _fpstate_ia32 __user *fx = buf; int err = 0; + + sanitize_i387_state(tsk); + /* * For legacy compatible, we always set FP/SSE bits in the bit * vector while saving the state to the user context. diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 01ab17ae2ae7..ef10940e1af0 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -49,55 +49,94 @@ #include <asm/system.h> #include <asm/apic.h> -/** - * pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs - * @gdb_regs: A pointer to hold the registers in the order GDB wants. - * @regs: The &struct pt_regs of the current process. - * - * Convert the pt_regs in @regs into the format for registers that - * GDB expects, stored in @gdb_regs. - */ -void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) +struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = { -#ifndef CONFIG_X86_32 - u32 *gdb_regs32 = (u32 *)gdb_regs; +#ifdef CONFIG_X86_32 + { "ax", 4, offsetof(struct pt_regs, ax) }, + { "cx", 4, offsetof(struct pt_regs, cx) }, + { "dx", 4, offsetof(struct pt_regs, dx) }, + { "bx", 4, offsetof(struct pt_regs, bx) }, + { "sp", 4, offsetof(struct pt_regs, sp) }, + { "bp", 4, offsetof(struct pt_regs, bp) }, + { "si", 4, offsetof(struct pt_regs, si) }, + { "di", 4, offsetof(struct pt_regs, di) }, + { "ip", 4, offsetof(struct pt_regs, ip) }, + { "flags", 4, offsetof(struct pt_regs, flags) }, + { "cs", 4, offsetof(struct pt_regs, cs) }, + { "ss", 4, offsetof(struct pt_regs, ss) }, + { "ds", 4, offsetof(struct pt_regs, ds) }, + { "es", 4, offsetof(struct pt_regs, es) }, + { "fs", 4, -1 }, + { "gs", 4, -1 }, +#else + { "ax", 8, offsetof(struct pt_regs, ax) }, + { "bx", 8, offsetof(struct pt_regs, bx) }, + { "cx", 8, offsetof(struct pt_regs, cx) }, + { "dx", 8, offsetof(struct pt_regs, dx) }, + { "si", 8, offsetof(struct pt_regs, dx) }, + { "di", 8, offsetof(struct pt_regs, di) }, + { "bp", 8, offsetof(struct pt_regs, bp) }, + { "sp", 8, offsetof(struct pt_regs, sp) }, + { "r8", 8, offsetof(struct pt_regs, r8) }, + { "r9", 8, offsetof(struct pt_regs, r9) }, + { "r10", 8, offsetof(struct pt_regs, r10) }, + { "r11", 8, offsetof(struct pt_regs, r11) }, + { "r12", 8, offsetof(struct pt_regs, r12) }, + { "r13", 8, offsetof(struct pt_regs, r13) }, + { "r14", 8, offsetof(struct pt_regs, r14) }, + { "r15", 8, offsetof(struct pt_regs, r15) }, + { "ip", 8, offsetof(struct pt_regs, ip) }, + { "flags", 4, offsetof(struct pt_regs, flags) }, + { "cs", 4, offsetof(struct pt_regs, cs) }, + { "ss", 4, offsetof(struct pt_regs, ss) }, #endif - gdb_regs[GDB_AX] = regs->ax; - gdb_regs[GDB_BX] = regs->bx; - gdb_regs[GDB_CX] = regs->cx; - gdb_regs[GDB_DX] = regs->dx; - gdb_regs[GDB_SI] = regs->si; - gdb_regs[GDB_DI] = regs->di; - gdb_regs[GDB_BP] = regs->bp; - gdb_regs[GDB_PC] = regs->ip; +}; + +int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) +{ + if ( #ifdef CONFIG_X86_32 - gdb_regs[GDB_PS] = regs->flags; - gdb_regs[GDB_DS] = regs->ds; - gdb_regs[GDB_ES] = regs->es; - gdb_regs[GDB_CS] = regs->cs; - gdb_regs[GDB_FS] = 0xFFFF; - gdb_regs[GDB_GS] = 0xFFFF; - if (user_mode_vm(regs)) { - gdb_regs[GDB_SS] = regs->ss; - gdb_regs[GDB_SP] = regs->sp; - } else { - gdb_regs[GDB_SS] = __KERNEL_DS; - gdb_regs[GDB_SP] = kernel_stack_pointer(regs); + regno == GDB_SS || regno == GDB_FS || regno == GDB_GS || +#endif + regno == GDB_SP || regno == GDB_ORIG_AX) + return 0; + + if (dbg_reg_def[regno].offset != -1) + memcpy((void *)regs + dbg_reg_def[regno].offset, mem, + dbg_reg_def[regno].size); + return 0; +} + +char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs) +{ + if (regno == GDB_ORIG_AX) { + memcpy(mem, ®s->orig_ax, sizeof(regs->orig_ax)); + return "orig_ax"; } -#else - gdb_regs[GDB_R8] = regs->r8; - gdb_regs[GDB_R9] = regs->r9; - gdb_regs[GDB_R10] = regs->r10; - gdb_regs[GDB_R11] = regs->r11; - gdb_regs[GDB_R12] = regs->r12; - gdb_regs[GDB_R13] = regs->r13; - gdb_regs[GDB_R14] = regs->r14; - gdb_regs[GDB_R15] = regs->r15; - gdb_regs32[GDB_PS] = regs->flags; - gdb_regs32[GDB_CS] = regs->cs; - gdb_regs32[GDB_SS] = regs->ss; - gdb_regs[GDB_SP] = kernel_stack_pointer(regs); + if (regno >= DBG_MAX_REG_NUM || regno < 0) + return NULL; + + if (dbg_reg_def[regno].offset != -1) + memcpy(mem, (void *)regs + dbg_reg_def[regno].offset, + dbg_reg_def[regno].size); + + switch (regno) { +#ifdef CONFIG_X86_32 + case GDB_SS: + if (!user_mode_vm(regs)) + *(unsigned long *)mem = __KERNEL_DS; + break; + case GDB_SP: + if (!user_mode_vm(regs)) + *(unsigned long *)mem = kernel_stack_pointer(regs); + break; + case GDB_GS: + case GDB_FS: + *(unsigned long *)mem = 0xFFFF; + break; #endif + } + return dbg_reg_def[regno].name; } /** @@ -150,54 +189,13 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) gdb_regs[GDB_SP] = p->thread.sp; } -/** - * gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs. - * @gdb_regs: A pointer to hold the registers we've received from GDB. - * @regs: A pointer to a &struct pt_regs to hold these values in. - * - * Convert the GDB regs in @gdb_regs into the pt_regs, and store them - * in @regs. - */ -void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) -{ -#ifndef CONFIG_X86_32 - u32 *gdb_regs32 = (u32 *)gdb_regs; -#endif - regs->ax = gdb_regs[GDB_AX]; - regs->bx = gdb_regs[GDB_BX]; - regs->cx = gdb_regs[GDB_CX]; - regs->dx = gdb_regs[GDB_DX]; - regs->si = gdb_regs[GDB_SI]; - regs->di = gdb_regs[GDB_DI]; - regs->bp = gdb_regs[GDB_BP]; - regs->ip = gdb_regs[GDB_PC]; -#ifdef CONFIG_X86_32 - regs->flags = gdb_regs[GDB_PS]; - regs->ds = gdb_regs[GDB_DS]; - regs->es = gdb_regs[GDB_ES]; - regs->cs = gdb_regs[GDB_CS]; -#else - regs->r8 = gdb_regs[GDB_R8]; - regs->r9 = gdb_regs[GDB_R9]; - regs->r10 = gdb_regs[GDB_R10]; - regs->r11 = gdb_regs[GDB_R11]; - regs->r12 = gdb_regs[GDB_R12]; - regs->r13 = gdb_regs[GDB_R13]; - regs->r14 = gdb_regs[GDB_R14]; - regs->r15 = gdb_regs[GDB_R15]; - regs->flags = gdb_regs32[GDB_PS]; - regs->cs = gdb_regs32[GDB_CS]; - regs->ss = gdb_regs32[GDB_SS]; -#endif -} - static struct hw_breakpoint { unsigned enabled; unsigned long addr; int len; int type; struct perf_event **pev; -} breakinfo[4]; +} breakinfo[HBP_NUM]; static unsigned long early_dr7; @@ -205,7 +203,7 @@ static void kgdb_correct_hw_break(void) { int breakno; - for (breakno = 0; breakno < 4; breakno++) { + for (breakno = 0; breakno < HBP_NUM; breakno++) { struct perf_event *bp; struct arch_hw_breakpoint *info; int val; @@ -292,10 +290,10 @@ kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) { int i; - for (i = 0; i < 4; i++) + for (i = 0; i < HBP_NUM; i++) if (breakinfo[i].addr == addr && breakinfo[i].enabled) break; - if (i == 4) + if (i == HBP_NUM) return -1; if (hw_break_release_slot(i)) { @@ -313,7 +311,7 @@ static void kgdb_remove_all_hw_break(void) int cpu = raw_smp_processor_id(); struct perf_event *bp; - for (i = 0; i < 4; i++) { + for (i = 0; i < HBP_NUM; i++) { if (!breakinfo[i].enabled) continue; bp = *per_cpu_ptr(breakinfo[i].pev, cpu); @@ -333,10 +331,10 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype) { int i; - for (i = 0; i < 4; i++) + for (i = 0; i < HBP_NUM; i++) if (!breakinfo[i].enabled) break; - if (i == 4) + if (i == HBP_NUM) return -1; switch (bptype) { @@ -397,7 +395,7 @@ void kgdb_disable_hw_debug(struct pt_regs *regs) /* Disable hardware debugging while we are in kgdb: */ set_debugreg(0UL, 7); - for (i = 0; i < 4; i++) { + for (i = 0; i < HBP_NUM; i++) { if (!breakinfo[i].enabled) continue; if (dbg_is_early) { @@ -458,7 +456,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, { unsigned long addr; char *ptr; - int newPC; switch (remcomInBuffer[0]) { case 'c': @@ -469,8 +466,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, linux_regs->ip = addr; case 'D': case 'k': - newPC = linux_regs->ip; - /* clear the trace bit */ linux_regs->flags &= ~X86_EFLAGS_TF; atomic_set(&kgdb_cpu_doing_single_step, -1); @@ -645,7 +640,7 @@ void kgdb_arch_late(void) attr.bp_len = HW_BREAKPOINT_LEN_1; attr.bp_type = HW_BREAKPOINT_W; attr.disabled = 1; - for (i = 0; i < 4; i++) { + for (i = 0; i < HBP_NUM; i++) { if (breakinfo[i].pev) continue; breakinfo[i].pev = register_wide_hw_breakpoint(&attr, NULL); diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c index 675879b65ce6..1bfb6cf4dd55 100644 --- a/arch/x86/kernel/kprobes.c +++ b/arch/x86/kernel/kprobes.c @@ -126,16 +126,22 @@ static void __kprobes synthesize_reljump(void *from, void *to) } /* - * Check for the REX prefix which can only exist on X86_64 - * X86_32 always returns 0 + * Skip the prefixes of the instruction. */ -static int __kprobes is_REX_prefix(kprobe_opcode_t *insn) +static kprobe_opcode_t *__kprobes skip_prefixes(kprobe_opcode_t *insn) { + insn_attr_t attr; + + attr = inat_get_opcode_attribute((insn_byte_t)*insn); + while (inat_is_legacy_prefix(attr)) { + insn++; + attr = inat_get_opcode_attribute((insn_byte_t)*insn); + } #ifdef CONFIG_X86_64 - if ((*insn & 0xf0) == 0x40) - return 1; + if (inat_is_rex_prefix(attr)) + insn++; #endif - return 0; + return insn; } /* @@ -272,6 +278,9 @@ static int __kprobes can_probe(unsigned long paddr) */ static int __kprobes is_IF_modifier(kprobe_opcode_t *insn) { + /* Skip prefixes */ + insn = skip_prefixes(insn); + switch (*insn) { case 0xfa: /* cli */ case 0xfb: /* sti */ @@ -280,13 +289,6 @@ static int __kprobes is_IF_modifier(kprobe_opcode_t *insn) return 1; } - /* - * on X86_64, 0x40-0x4f are REX prefixes so we need to look - * at the next byte instead.. but of course not recurse infinitely - */ - if (is_REX_prefix(insn)) - return is_IF_modifier(++insn); - return 0; } @@ -803,9 +805,8 @@ static void __kprobes resume_execution(struct kprobe *p, unsigned long orig_ip = (unsigned long)p->addr; kprobe_opcode_t *insn = p->ainsn.insn; - /*skip the REX prefix*/ - if (is_REX_prefix(insn)) - insn++; + /* Skip prefixes */ + insn = skip_prefixes(insn); regs->flags &= ~X86_EFLAGS_TF; switch (*insn) { diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c index 5915e0b33303..79ae68154e87 100644 --- a/arch/x86/kernel/mrst.c +++ b/arch/x86/kernel/mrst.c @@ -25,8 +25,34 @@ #include <asm/i8259.h> #include <asm/apb_timer.h> +/* + * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock, + * cmdline option x86_mrst_timer can be used to override the configuration + * to prefer one or the other. + * at runtime, there are basically three timer configurations: + * 1. per cpu apbt clock only + * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only + * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast. + * + * by default (without cmdline option), platform code first detects cpu type + * to see if we are on lincroft or penwell, then set up both lapic or apbt + * clocks accordingly. + * i.e. by default, medfield uses configuration #2, moorestown uses #1. + * config #3 is supported but not recommended on medfield. + * + * rating and feature summary: + * lapic (with C3STOP) --------- 100 + * apbt (always-on) ------------ 110 + * lapic (always-on,ARAT) ------ 150 + */ + +__cpuinitdata enum mrst_timer_options mrst_timer_options; + static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM]; static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM]; +enum mrst_cpu_type __mrst_cpu_chip; +EXPORT_SYMBOL_GPL(__mrst_cpu_chip); + int sfi_mtimer_num; struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; @@ -167,18 +193,6 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) return 0; } -/* - * the secondary clock in Moorestown can be APBT or LAPIC clock, default to - * APBT but cmdline option can also override it. - */ -static void __cpuinit mrst_setup_secondary_clock(void) -{ - /* restore default lapic clock if disabled by cmdline */ - if (disable_apbt_percpu) - return setup_secondary_APIC_clock(); - apbt_setup_secondary_clock(); -} - static unsigned long __init mrst_calibrate_tsc(void) { unsigned long flags, fast_calibrate; @@ -195,6 +209,21 @@ static unsigned long __init mrst_calibrate_tsc(void) void __init mrst_time_init(void) { + switch (mrst_timer_options) { + case MRST_TIMER_APBT_ONLY: + break; + case MRST_TIMER_LAPIC_APBT: + x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock; + x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; + break; + default: + if (!boot_cpu_has(X86_FEATURE_ARAT)) + break; + x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock; + x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; + return; + } + /* we need at least one APB timer */ sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); pre_init_apic_IRQ0(); apbt_time_init(); @@ -205,16 +234,21 @@ void __init mrst_rtc_init(void) sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); } -/* - * if we use per cpu apb timer, the bootclock already setup. if we use lapic - * timer and one apbt timer for broadcast, we need to set up lapic boot clock. - */ -static void __init mrst_setup_boot_clock(void) +void __cpuinit mrst_arch_setup(void) { - pr_info("%s: per cpu apbt flag %d \n", __func__, disable_apbt_percpu); - if (disable_apbt_percpu) - setup_boot_APIC_clock(); -}; + if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27) + __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL; + else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26) + __mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT; + else { + pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n", + boot_cpu_data.x86, boot_cpu_data.x86_model); + __mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT; + } + pr_debug("Moorestown CPU %s identified\n", + (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ? + "Lincroft" : "Penwell"); +} /* MID systems don't have i8042 controller */ static int mrst_i8042_detect(void) @@ -232,11 +266,13 @@ void __init x86_mrst_early_setup(void) x86_init.resources.reserve_resources = x86_init_noop; x86_init.timers.timer_init = mrst_time_init; - x86_init.timers.setup_percpu_clockev = mrst_setup_boot_clock; + x86_init.timers.setup_percpu_clockev = x86_init_noop; x86_init.irqs.pre_vector_init = x86_init_noop; - x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock; + x86_init.oem.arch_setup = mrst_arch_setup; + + x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock; x86_platform.calibrate_tsc = mrst_calibrate_tsc; x86_platform.i8042_detect = mrst_i8042_detect; @@ -250,3 +286,26 @@ void __init x86_mrst_early_setup(void) x86_init.mpparse.get_smp_config = x86_init_uint_noop; } + +/* + * if user does not want to use per CPU apb timer, just give it a lower rating + * than local apic timer and skip the late per cpu timer init. + */ +static inline int __init setup_x86_mrst_timer(char *arg) +{ + if (!arg) + return -EINVAL; + + if (strcmp("apbt_only", arg) == 0) + mrst_timer_options = MRST_TIMER_APBT_ONLY; + else if (strcmp("lapic_and_apbt", arg) == 0) + mrst_timer_options = MRST_TIMER_LAPIC_APBT; + else { + pr_warning("X86 MRST timer option %s not recognised" + " use x86_mrst_timer=apbt_only or lapic_and_apbt\n", + arg); + return -EINVAL; + } + return 0; +} +__setup("x86_mrst_timer=", setup_x86_mrst_timer); diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c index 8297160c41b3..0e0cdde519be 100644 --- a/arch/x86/kernel/olpc.c +++ b/arch/x86/kernel/olpc.c @@ -21,10 +21,7 @@ #include <asm/geode.h> #include <asm/setup.h> #include <asm/olpc.h> - -#ifdef CONFIG_OPEN_FIRMWARE -#include <asm/ofw.h> -#endif +#include <asm/olpc_ofw.h> struct olpc_platform_t olpc_platform_info; EXPORT_SYMBOL_GPL(olpc_platform_info); @@ -145,7 +142,7 @@ restart: * The OBF flag will sometimes misbehave due to what we believe * is a hardware quirk.. */ - printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd); + pr_devel("olpc-ec: running cmd 0x%x\n", cmd); outb(cmd, 0x6c); if (wait_on_ibf(0x6c, 0)) { @@ -162,8 +159,7 @@ restart: " EC accept data!\n"); goto err; } - printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n", - inbuf[i]); + pr_devel("olpc-ec: sending cmd arg 0x%x\n", inbuf[i]); outb(inbuf[i], 0x68); } } @@ -176,8 +172,7 @@ restart: goto restart; } outbuf[i] = inb(0x68); - printk(KERN_DEBUG "olpc-ec: received 0x%x\n", - outbuf[i]); + pr_devel("olpc-ec: received 0x%x\n", outbuf[i]); } } @@ -188,14 +183,15 @@ err: } EXPORT_SYMBOL_GPL(olpc_ec_cmd); -#ifdef CONFIG_OPEN_FIRMWARE +#ifdef CONFIG_OLPC_OPENFIRMWARE static void __init platform_detect(void) { size_t propsize; __be32 rev; + const void *args[] = { NULL, "board-revision-int", &rev, (void *)4 }; + void *res[] = { &propsize }; - if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4, - &propsize) || propsize != 4) { + if (olpc_ofw("getprop", args, res) || propsize != 4) { printk(KERN_ERR "ofw: getprop call failed!\n"); rev = cpu_to_be32(0); } diff --git a/arch/x86/kernel/olpc_ofw.c b/arch/x86/kernel/olpc_ofw.c new file mode 100644 index 000000000000..3218aa71ab5e --- /dev/null +++ b/arch/x86/kernel/olpc_ofw.c @@ -0,0 +1,106 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/olpc_ofw.h> + +/* address of OFW callback interface; will be NULL if OFW isn't found */ +static int (*olpc_ofw_cif)(int *); + +/* page dir entry containing OFW's pgdir table; filled in by head_32.S */ +u32 olpc_ofw_pgd __initdata; + +static DEFINE_SPINLOCK(ofw_lock); + +#define MAXARGS 10 + +void __init setup_olpc_ofw_pgd(void) +{ + pgd_t *base, *ofw_pde; + + if (!olpc_ofw_cif) + return; + + /* fetch OFW's PDE */ + base = early_ioremap(olpc_ofw_pgd, sizeof(olpc_ofw_pgd) * PTRS_PER_PGD); + if (!base) { + printk(KERN_ERR "failed to remap OFW's pgd - disabling OFW!\n"); + olpc_ofw_cif = NULL; + return; + } + ofw_pde = &base[OLPC_OFW_PDE_NR]; + + /* install OFW's PDE permanently into the kernel's pgtable */ + set_pgd(&swapper_pg_dir[OLPC_OFW_PDE_NR], *ofw_pde); + /* implicit optimization barrier here due to uninline function return */ + + early_iounmap(base, sizeof(olpc_ofw_pgd) * PTRS_PER_PGD); +} + +int __olpc_ofw(const char *name, int nr_args, const void **args, int nr_res, + void **res) +{ + int ofw_args[MAXARGS + 3]; + unsigned long flags; + int ret, i, *p; + + BUG_ON(nr_args + nr_res > MAXARGS); + + if (!olpc_ofw_cif) + return -EIO; + + ofw_args[0] = (int)name; + ofw_args[1] = nr_args; + ofw_args[2] = nr_res; + + p = &ofw_args[3]; + for (i = 0; i < nr_args; i++, p++) + *p = (int)args[i]; + + /* call into ofw */ + spin_lock_irqsave(&ofw_lock, flags); + ret = olpc_ofw_cif(ofw_args); + spin_unlock_irqrestore(&ofw_lock, flags); + + if (!ret) { + for (i = 0; i < nr_res; i++, p++) + *((int *)res[i]) = *p; + } + + return ret; +} +EXPORT_SYMBOL_GPL(__olpc_ofw); + +/* OFW cif _should_ be above this address */ +#define OFW_MIN 0xff000000 + +/* OFW starts on a 1MB boundary */ +#define OFW_BOUND (1<<20) + +void __init olpc_ofw_detect(void) +{ + struct olpc_ofw_header *hdr = &boot_params.olpc_ofw_header; + unsigned long start; + + /* ensure OFW booted us by checking for "OFW " string */ + if (hdr->ofw_magic != OLPC_OFW_SIG) + return; + + olpc_ofw_cif = (int (*)(int *))hdr->cif_handler; + + if ((unsigned long)olpc_ofw_cif < OFW_MIN) { + printk(KERN_ERR "OFW detected, but cif has invalid address 0x%lx - disabling.\n", + (unsigned long)olpc_ofw_cif); + olpc_ofw_cif = NULL; + return; + } + + /* determine where OFW starts in memory */ + start = round_down((unsigned long)olpc_ofw_cif, OFW_BOUND); + printk(KERN_INFO "OFW detected in memory, cif @ 0x%lx (reserving top %ldMB)\n", + (unsigned long)olpc_ofw_cif, (-start) >> 20); + reserve_top_address(-start); +} diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index cbcf013a0ec6..d401f1d2d06e 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -526,44 +526,10 @@ static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) return (edx & MWAIT_EDX_C1); } -/* - * Check for AMD CPUs, where APIC timer interrupt does not wake up CPU from C1e. - * For more information see - * - Erratum #400 for NPT family 0xf and family 0x10 CPUs - * - Erratum #365 for family 0x11 (not affected because C1e not in use) - */ -static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) -{ - u64 val; - if (c->x86_vendor != X86_VENDOR_AMD) - goto no_c1e_idle; - - /* Family 0x0f models < rev F do not have C1E */ - if (c->x86 == 0x0F && c->x86_model >= 0x40) - return 1; - - if (c->x86 == 0x10) { - /* - * check OSVW bit for CPUs that are not affected - * by erratum #400 - */ - if (cpu_has(c, X86_FEATURE_OSVW)) { - rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, val); - if (val >= 2) { - rdmsrl(MSR_AMD64_OSVW_STATUS, val); - if (!(val & BIT(1))) - goto no_c1e_idle; - } - } - return 1; - } - -no_c1e_idle: - return 0; -} +bool c1e_detected; +EXPORT_SYMBOL(c1e_detected); static cpumask_var_t c1e_mask; -static int c1e_detected; void c1e_remove_cpu(int cpu) { @@ -585,12 +551,12 @@ static void c1e_idle(void) u32 lo, hi; rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); + if (lo & K8_INTP_C1E_ACTIVE_MASK) { - c1e_detected = 1; + c1e_detected = true; if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) mark_tsc_unstable("TSC halt in AMD C1E"); printk(KERN_INFO "System has AMD C1E enabled\n"); - set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E); } } @@ -639,7 +605,8 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) */ printk(KERN_INFO "using mwait in idle threads.\n"); pm_idle = mwait_idle; - } else if (check_c1e_idle(c)) { + } else if (cpu_has_amd_erratum(amd_erratum_400)) { + /* E400: APIC timer interrupt does not wake up CPU from C1e */ printk(KERN_INFO "using C1E aware idle routine\n"); pm_idle = c1e_idle; } else diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 8d128783af47..96586c3cbbbf 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -57,6 +57,8 @@ #include <asm/syscalls.h> #include <asm/debugreg.h> +#include <trace/events/power.h> + asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); /* @@ -111,6 +113,8 @@ void cpu_idle(void) stop_critical_timings(); pm_idle(); start_critical_timings(); + + trace_power_end(smp_processor_id()); } tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 3c2422a99f1f..3d9ea531ddd1 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -51,6 +51,8 @@ #include <asm/syscalls.h> #include <asm/debugreg.h> +#include <trace/events/power.h> + asmlinkage extern void ret_from_fork(void); DEFINE_PER_CPU(unsigned long, old_rsp); @@ -138,6 +140,9 @@ void cpu_idle(void) stop_critical_timings(); pm_idle(); start_critical_timings(); + + trace_power_end(smp_processor_id()); + /* In many cases the interrupt that ended idle has already called exit_idle. But some idle loops can be woken up without interrupt. */ diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index b4ae4acbd031..b008e7883207 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -102,6 +102,7 @@ #include <asm/paravirt.h> #include <asm/hypervisor.h> +#include <asm/olpc_ofw.h> #include <asm/percpu.h> #include <asm/topology.h> @@ -736,10 +737,15 @@ void __init setup_arch(char **cmdline_p) /* VMI may relocate the fixmap; do this before touching ioremap area */ vmi_init(); + /* OFW also may relocate the fixmap */ + olpc_ofw_detect(); + early_trap_init(); early_cpu_init(); early_ioremap_init(); + setup_olpc_ofw_pgd(); + ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev); screen_info = boot_params.screen_info; edid_info = boot_params.edid_info; diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index c4f33b2e77d6..51620953b18a 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -735,7 +735,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) goto do_rest; } - if (!keventd_up() || current_is_keventd()) + if (!keventd_up()) c_idle.work.func(&c_idle.work); else { schedule_work(&c_idle.work); @@ -816,6 +816,13 @@ do_rest: if (cpumask_test_cpu(cpu, cpu_callin_mask)) break; /* It has booted */ udelay(100); + /* + * Allow other tasks to run while we wait for the + * AP to come online. This also gives a chance + * for the MTRR work(triggered by the AP coming online) + * to be completed in the stop machine context. + */ + schedule(); } if (cpumask_test_cpu(cpu, cpu_callin_mask)) diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index 922eefbb3f6c..b53c525368a7 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -23,11 +23,16 @@ static int save_stack_stack(void *data, char *name) return 0; } -static void save_stack_address(void *data, unsigned long addr, int reliable) +static void +__save_stack_address(void *data, unsigned long addr, bool reliable, bool nosched) { struct stack_trace *trace = data; +#ifdef CONFIG_FRAME_POINTER if (!reliable) return; +#endif + if (nosched && in_sched_functions(addr)) + return; if (trace->skip > 0) { trace->skip--; return; @@ -36,20 +41,15 @@ static void save_stack_address(void *data, unsigned long addr, int reliable) trace->entries[trace->nr_entries++] = addr; } +static void save_stack_address(void *data, unsigned long addr, int reliable) +{ + return __save_stack_address(data, addr, reliable, false); +} + static void save_stack_address_nosched(void *data, unsigned long addr, int reliable) { - struct stack_trace *trace = (struct stack_trace *)data; - if (!reliable) - return; - if (in_sched_functions(addr)) - return; - if (trace->skip > 0) { - trace->skip--; - return; - } - if (trace->nr_entries < trace->max_entries) - trace->entries[trace->nr_entries++] = addr; + return __save_stack_address(data, addr, reliable, true); } static const struct stacktrace_ops save_stack_ops = { @@ -96,12 +96,13 @@ EXPORT_SYMBOL_GPL(save_stack_trace_tsk); /* Userspace stacktrace - based on kernel/trace/trace_sysprof.c */ -struct stack_frame { +struct stack_frame_user { const void __user *next_fp; unsigned long ret_addr; }; -static int copy_stack_frame(const void __user *fp, struct stack_frame *frame) +static int +copy_stack_frame(const void __user *fp, struct stack_frame_user *frame) { int ret; @@ -126,7 +127,7 @@ static inline void __save_stack_trace_user(struct stack_trace *trace) trace->entries[trace->nr_entries++] = regs->ip; while (trace->nr_entries < trace->max_entries) { - struct stack_frame frame; + struct stack_frame_user frame; frame.next_fp = NULL; frame.ret_addr = 0; diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 725ef4d17cd5..60788dee0f8a 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -392,7 +392,13 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs) if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) == NOTIFY_STOP) return; + #ifdef CONFIG_X86_LOCAL_APIC + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) + return; + +#ifndef CONFIG_LOCKUP_DETECTOR /* * Ok, so this is none of the documented NMI sources, * so it must be the NMI watchdog. @@ -400,6 +406,7 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs) if (nmi_watchdog_tick(regs, reason)) return; if (!do_nmi_callback(regs, cpu)) +#endif /* !CONFIG_LOCKUP_DETECTOR */ unknown_nmi_error(reason, regs); #else unknown_nmi_error(reason, regs); diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 9faf91ae1841..ce8e50239332 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -751,7 +751,6 @@ static struct clocksource clocksource_tsc = { .read = read_tsc, .resume = resume_tsc, .mask = CLOCKSOURCE_MASK(64), - .shift = 22, .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_MUST_VERIFY, #ifdef CONFIG_X86_64 @@ -845,8 +844,6 @@ __cpuinit int unsynchronized_tsc(void) static void __init init_tsc_clocksource(void) { - clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, - clocksource_tsc.shift); if (tsc_clocksource_reliable) clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; /* lower the rating if we already know its unstable: */ @@ -854,7 +851,7 @@ static void __init init_tsc_clocksource(void) clocksource_tsc.rating = 0; clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; } - clocksource_register(&clocksource_tsc); + clocksource_register_khz(&clocksource_tsc, tsc_khz); } #ifdef CONFIG_X86_64 diff --git a/arch/x86/kernel/verify_cpu_64.S b/arch/x86/kernel/verify_cpu_64.S index 45b6f8a975a1..56a8c2a867d9 100644 --- a/arch/x86/kernel/verify_cpu_64.S +++ b/arch/x86/kernel/verify_cpu_64.S @@ -31,6 +31,7 @@ */ #include <asm/cpufeature.h> +#include <asm/msr-index.h> verify_cpu: pushfl # Save caller passed flags @@ -88,7 +89,7 @@ verify_cpu_sse_test: je verify_cpu_sse_ok test %di,%di jz verify_cpu_no_longmode # only try to force SSE on AMD - movl $0xc0010015,%ecx # HWCR + movl $MSR_K7_HWCR,%ecx rdmsr btr $15,%eax # enable SSE wrmsr diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index 1c0c6ab9c60f..dcbb28c4b694 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -73,8 +73,8 @@ void update_vsyscall_tz(void) write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags); } -void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, - u32 mult) +void update_vsyscall(struct timespec *wall_time, struct timespec *wtm, + struct clocksource *clock, u32 mult) { unsigned long flags; @@ -87,7 +87,7 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock, vsyscall_gtod_data.clock.shift = clock->shift; vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec; vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec; - vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic; + vsyscall_gtod_data.wall_to_monotonic = *wtm; vsyscall_gtod_data.wall_time_coarse = __current_kernel_time(); write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags); } @@ -169,13 +169,18 @@ int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz) * unlikely */ time_t __vsyscall(1) vtime(time_t *t) { - struct timeval tv; + unsigned seq; time_t result; if (unlikely(!__vsyscall_gtod_data.sysctl_enabled)) return time_syscall(t); - vgettimeofday(&tv, NULL); - result = tv.tv_sec; + do { + seq = read_seqbegin(&__vsyscall_gtod_data.lock); + + result = __vsyscall_gtod_data.wall_time_sec; + + } while (read_seqretry(&__vsyscall_gtod_data.lock, seq)); + if (t) *t = result; return result; diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 37e68fc5e24a..9c253bd65e24 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -16,11 +16,88 @@ */ u64 pcntxt_mask; +/* + * Represents init state for the supported extended state. + */ +static struct xsave_struct *init_xstate_buf; + struct _fpx_sw_bytes fx_sw_reserved; #ifdef CONFIG_IA32_EMULATION struct _fpx_sw_bytes fx_sw_reserved_ia32; #endif +static unsigned int *xstate_offsets, *xstate_sizes, xstate_features; + +/* + * If a processor implementation discern that a processor state component is + * in its initialized state it may modify the corresponding bit in the + * xsave_hdr.xstate_bv as '0', with out modifying the corresponding memory + * layout in the case of xsaveopt. While presenting the xstate information to + * the user, we always ensure that the memory layout of a feature will be in + * the init state if the corresponding header bit is zero. This is to ensure + * that the user doesn't see some stale state in the memory layout during + * signal handling, debugging etc. + */ +void __sanitize_i387_state(struct task_struct *tsk) +{ + u64 xstate_bv; + int feature_bit = 0x2; + struct i387_fxsave_struct *fx = &tsk->thread.fpu.state->fxsave; + + if (!fx) + return; + + BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU); + + xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv; + + /* + * None of the feature bits are in init state. So nothing else + * to do for us, as the memory layout is upto date. + */ + if ((xstate_bv & pcntxt_mask) == pcntxt_mask) + return; + + /* + * FP is in init state + */ + if (!(xstate_bv & XSTATE_FP)) { + fx->cwd = 0x37f; + fx->swd = 0; + fx->twd = 0; + fx->fop = 0; + fx->rip = 0; + fx->rdp = 0; + memset(&fx->st_space[0], 0, 128); + } + + /* + * SSE is in init state + */ + if (!(xstate_bv & XSTATE_SSE)) + memset(&fx->xmm_space[0], 0, 256); + + xstate_bv = (pcntxt_mask & ~xstate_bv) >> 2; + + /* + * Update all the other memory layouts for which the corresponding + * header bit is in the init state. + */ + while (xstate_bv) { + if (xstate_bv & 0x1) { + int offset = xstate_offsets[feature_bit]; + int size = xstate_sizes[feature_bit]; + + memcpy(((void *) fx) + offset, + ((void *) init_xstate_buf) + offset, + size); + } + + xstate_bv >>= 1; + feature_bit++; + } +} + /* * Check for the presence of extended state information in the * user fpstate pointer in the sigcontext. @@ -36,15 +113,14 @@ int check_for_xstate(struct i387_fxsave_struct __user *buf, err = __copy_from_user(fx_sw_user, &buf->sw_reserved[0], sizeof(struct _fpx_sw_bytes)); - if (err) - return err; + return -EFAULT; /* * First Magic check failed. */ if (fx_sw_user->magic1 != FP_XSTATE_MAGIC1) - return -1; + return -EINVAL; /* * Check for error scenarios. @@ -52,19 +128,21 @@ int check_for_xstate(struct i387_fxsave_struct __user *buf, if (fx_sw_user->xstate_size < min_xstate_size || fx_sw_user->xstate_size > xstate_size || fx_sw_user->xstate_size > fx_sw_user->extended_size) - return -1; + return -EINVAL; err = __get_user(magic2, (__u32 *) (((void *)fpstate) + fx_sw_user->extended_size - FP_XSTATE_MAGIC2_SIZE)); + if (err) + return err; /* * Check for the presence of second magic word at the end of memory * layout. This detects the case where the user just copied the legacy * fpstate layout with out copying the extended state information * in the memory layout. */ - if (err || magic2 != FP_XSTATE_MAGIC2) - return -1; + if (magic2 != FP_XSTATE_MAGIC2) + return -EFAULT; return 0; } @@ -91,14 +169,6 @@ int save_i387_xstate(void __user *buf) return 0; if (task_thread_info(tsk)->status & TS_USEDFPU) { - /* - * Start with clearing the user buffer. This will present a - * clean context for the bytes not touched by the fxsave/xsave. - */ - err = __clear_user(buf, sig_xstate_size); - if (err) - return err; - if (use_xsave()) err = xsave_user(buf); else @@ -109,6 +179,7 @@ int save_i387_xstate(void __user *buf) task_thread_info(tsk)->status &= ~TS_USEDFPU; stts(); } else { + sanitize_i387_state(tsk); if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave, xstate_size)) return -1; @@ -184,8 +255,8 @@ static int restore_user_xstate(void __user *buf) * init the state skipped by the user. */ mask = pcntxt_mask & ~mask; - - xrstor_state(init_xstate_buf, mask); + if (unlikely(mask)) + xrstor_state(init_xstate_buf, mask); return 0; @@ -274,11 +345,6 @@ static void prepare_fx_sw_frame(void) #endif } -/* - * Represents init state for the supported extended state. - */ -struct xsave_struct *init_xstate_buf; - #ifdef CONFIG_X86_64 unsigned int sig_xstate_size = sizeof(struct _fpstate); #endif @@ -286,37 +352,77 @@ unsigned int sig_xstate_size = sizeof(struct _fpstate); /* * Enable the extended processor state save/restore feature */ -void __cpuinit xsave_init(void) +static inline void xstate_enable(void) { - if (!cpu_has_xsave) - return; - set_in_cr4(X86_CR4_OSXSAVE); - - /* - * Enable all the features that the HW is capable of - * and the Linux kernel is aware of. - */ xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask); } /* + * Record the offsets and sizes of different state managed by the xsave + * memory layout. + */ +static void __init setup_xstate_features(void) +{ + int eax, ebx, ecx, edx, leaf = 0x2; + + xstate_features = fls64(pcntxt_mask); + xstate_offsets = alloc_bootmem(xstate_features * sizeof(int)); + xstate_sizes = alloc_bootmem(xstate_features * sizeof(int)); + + do { + cpuid_count(XSTATE_CPUID, leaf, &eax, &ebx, &ecx, &edx); + + if (eax == 0) + break; + + xstate_offsets[leaf] = ebx; + xstate_sizes[leaf] = eax; + + leaf++; + } while (1); +} + +/* * setup the xstate image representing the init state */ static void __init setup_xstate_init(void) { + setup_xstate_features(); + + /* + * Setup init_xstate_buf to represent the init state of + * all the features managed by the xsave + */ init_xstate_buf = alloc_bootmem(xstate_size); init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT; + + clts(); + /* + * Init all the features state with header_bv being 0x0 + */ + xrstor_state(init_xstate_buf, -1); + /* + * Dump the init state again. This is to identify the init state + * of any feature which is not represented by all zero's. + */ + xsave_state(init_xstate_buf, -1); + stts(); } /* * Enable and initialize the xsave feature. */ -void __ref xsave_cntxt_init(void) +static void __init xstate_enable_boot_cpu(void) { unsigned int eax, ebx, ecx, edx; - cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx); + if (boot_cpu_data.cpuid_level < XSTATE_CPUID) { + WARN(1, KERN_ERR "XSTATE_CPUID missing\n"); + return; + } + + cpuid_count(XSTATE_CPUID, 0, &eax, &ebx, &ecx, &edx); pcntxt_mask = eax + ((u64)edx << 32); if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) { @@ -329,12 +435,13 @@ void __ref xsave_cntxt_init(void) * Support only the state known to OS. */ pcntxt_mask = pcntxt_mask & XCNTXT_MASK; - xsave_init(); + + xstate_enable(); /* * Recompute the context size for enabled features */ - cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx); + cpuid_count(XSTATE_CPUID, 0, &eax, &ebx, &ecx, &edx); xstate_size = ebx; update_regset_xstate_info(xstate_size, pcntxt_mask); @@ -346,3 +453,23 @@ void __ref xsave_cntxt_init(void) "cntxt size 0x%x\n", pcntxt_mask, xstate_size); } + +/* + * For the very first instance, this calls xstate_enable_boot_cpu(); + * for all subsequent instances, this calls xstate_enable(). + * + * This is somewhat obfuscated due to the lack of powerful enough + * overrides for the section checks. + */ +void __cpuinit xsave_init(void) +{ + static __refdata void (*next_func)(void) = xstate_enable_boot_cpu; + void (*this_func)(void); + + if (!cpu_has_xsave) + return; + + this_func = next_func; + next_func = xstate_enable; + this_func(); +} diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 0dcc95e09876..311f6dad8951 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -281,11 +281,7 @@ static gfn_t pse36_gfn_delta(u32 gpte) static void __set_spte(u64 *sptep, u64 spte) { -#ifdef CONFIG_X86_64 - set_64bit((unsigned long *)sptep, spte); -#else - set_64bit((unsigned long long *)sptep, spte); -#endif + set_64bit(sptep, spte); } static u64 __xchg_spte(u64 *sptep, u64 new_spte) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 56c9b6bd7655..bc5b9b8d4a33 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -131,7 +131,7 @@ static struct svm_direct_access_msrs { u32 index; /* Index of the MSR */ bool always; /* True if intercept is always on */ } direct_access_msrs[] = { - { .index = MSR_K6_STAR, .always = true }, + { .index = MSR_STAR, .always = true }, { .index = MSR_IA32_SYSENTER_CS, .always = true }, #ifdef CONFIG_X86_64 { .index = MSR_GS_BASE, .always = true }, @@ -384,8 +384,7 @@ static void svm_init_erratum_383(void) int err; u64 val; - /* Only Fam10h is affected */ - if (boot_cpu_data.x86 != 0x10) + if (!cpu_has_amd_erratum(amd_erratum_383)) return; /* Use _safe variants to not break nested virtualization */ @@ -2433,7 +2432,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data) *data = tsc_offset + native_read_tsc(); break; } - case MSR_K6_STAR: + case MSR_STAR: *data = svm->vmcb->save.star; break; #ifdef CONFIG_X86_64 @@ -2557,7 +2556,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data) break; } - case MSR_K6_STAR: + case MSR_STAR: svm->vmcb->save.star = data; break; #ifdef CONFIG_X86_64 diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 27a0222c2946..49b25eee25ac 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -240,14 +240,14 @@ static u64 host_efer; static void ept_save_pdptrs(struct kvm_vcpu *vcpu); /* - * Keep MSR_K6_STAR at the end, as setup_msrs() will try to optimize it + * Keep MSR_STAR at the end, as setup_msrs() will try to optimize it * away by decrementing the array size. */ static const u32 vmx_msr_index[] = { #ifdef CONFIG_X86_64 MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR, #endif - MSR_EFER, MSR_TSC_AUX, MSR_K6_STAR, + MSR_EFER, MSR_TSC_AUX, MSR_STAR, }; #define NR_VMX_MSR ARRAY_SIZE(vmx_msr_index) @@ -1117,10 +1117,10 @@ static void setup_msrs(struct vcpu_vmx *vmx) if (index >= 0 && vmx->rdtscp_enabled) move_msr_up(vmx, index, save_nmsrs++); /* - * MSR_K6_STAR is only needed on long mode guests, and only + * MSR_STAR is only needed on long mode guests, and only * if efer.sce is enabled. */ - index = __find_msr_index(vmx, MSR_K6_STAR); + index = __find_msr_index(vmx, MSR_STAR); if ((index >= 0) && (vmx->vcpu.arch.efer & EFER_SCE)) move_msr_up(vmx, index, save_nmsrs++); } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 97aab036dabf..25f19078b321 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -733,7 +733,7 @@ static u32 msrs_to_save[] = { HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL, HV_X64_MSR_APIC_ASSIST_PAGE, MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP, - MSR_K6_STAR, + MSR_STAR, #ifdef CONFIG_X86_64 MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR, #endif diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index f871e04b6965..e10cf070ede0 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -30,6 +30,7 @@ ifeq ($(CONFIG_X86_32),y) lib-y += checksum_32.o lib-y += strstr_32.o lib-y += semaphore_32.o string_32.o + lib-y += cmpxchg.o ifneq ($(CONFIG_X86_CMPXCHG64),y) lib-y += cmpxchg8b_emu.o atomic64_386_32.o endif diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S index ebeafcce04a9..aa4326bfb24a 100644 --- a/arch/x86/lib/clear_page_64.S +++ b/arch/x86/lib/clear_page_64.S @@ -52,7 +52,7 @@ ENDPROC(clear_page) .align 8 .quad clear_page .quad 1b - .byte X86_FEATURE_REP_GOOD + .word X86_FEATURE_REP_GOOD .byte .Lclear_page_end - clear_page .byte 2b - 1b .previous diff --git a/arch/x86/kernel/cpu/cmpxchg.c b/arch/x86/lib/cmpxchg.c index 2056ccf572cc..5d619f6df3ee 100644 --- a/arch/x86/kernel/cpu/cmpxchg.c +++ b/arch/x86/lib/cmpxchg.c @@ -52,21 +52,3 @@ unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new) } EXPORT_SYMBOL(cmpxchg_386_u32); #endif - -#ifndef CONFIG_X86_CMPXCHG64 -unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new) -{ - u64 prev; - unsigned long flags; - - /* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */ - local_irq_save(flags); - prev = *(u64 *)ptr; - if (prev == old) - *(u64 *)ptr = new; - local_irq_restore(flags); - return prev; -} -EXPORT_SYMBOL(cmpxchg_486_u64); -#endif - diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S index 727a5d46d2fc..6fec2d1cebe1 100644 --- a/arch/x86/lib/copy_page_64.S +++ b/arch/x86/lib/copy_page_64.S @@ -113,7 +113,7 @@ ENDPROC(copy_page) .align 8 .quad copy_page .quad 1b - .byte X86_FEATURE_REP_GOOD + .word X86_FEATURE_REP_GOOD .byte .Lcopy_page_end - copy_page .byte 2b - 1b .previous diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index 71100c98e337..a460158b5ac5 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -29,7 +29,7 @@ .align 8 .quad 0b .quad 2b - .byte \feature /* when feature is set */ + .word \feature /* when feature is set */ .byte 5 .byte 5 .previous diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index f82e884928af..bcbcd1e0f7d5 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -131,7 +131,7 @@ ENDPROC(__memcpy) .align 8 .quad memcpy .quad .Lmemcpy_c - .byte X86_FEATURE_REP_GOOD + .word X86_FEATURE_REP_GOOD /* * Replace only beginning, memcpy is used to apply alternatives, diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S index e88d3b81644a..09d344269652 100644 --- a/arch/x86/lib/memset_64.S +++ b/arch/x86/lib/memset_64.S @@ -121,7 +121,7 @@ ENDPROC(__memset) .align 8 .quad memset .quad .Lmemset_c - .byte X86_FEATURE_REP_GOOD + .word X86_FEATURE_REP_GOOD .byte .Lfinal - memset .byte .Lmemset_e - .Lmemset_c .previous diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c index a725b7f760ae..0002a3a33081 100644 --- a/arch/x86/mm/dump_pagetables.c +++ b/arch/x86/mm/dump_pagetables.c @@ -37,6 +37,28 @@ struct addr_marker { const char *name; }; +/* indices for address_markers; keep sync'd w/ address_markers below */ +enum address_markers_idx { + USER_SPACE_NR = 0, +#ifdef CONFIG_X86_64 + KERNEL_SPACE_NR, + LOW_KERNEL_NR, + VMALLOC_START_NR, + VMEMMAP_START_NR, + HIGH_KERNEL_NR, + MODULES_VADDR_NR, + MODULES_END_NR, +#else + KERNEL_SPACE_NR, + VMALLOC_START_NR, + VMALLOC_END_NR, +# ifdef CONFIG_HIGHMEM + PKMAP_BASE_NR, +# endif + FIXADDR_START_NR, +#endif +}; + /* Address space markers hints */ static struct addr_marker address_markers[] = { { 0, "User Space" }, @@ -331,14 +353,12 @@ static int pt_dump_init(void) #ifdef CONFIG_X86_32 /* Not a compile-time constant on x86-32 */ - address_markers[2].start_address = VMALLOC_START; - address_markers[3].start_address = VMALLOC_END; + address_markers[VMALLOC_START_NR].start_address = VMALLOC_START; + address_markers[VMALLOC_END_NR].start_address = VMALLOC_END; # ifdef CONFIG_HIGHMEM - address_markers[4].start_address = PKMAP_BASE; - address_markers[5].start_address = FIXADDR_START; -# else - address_markers[4].start_address = FIXADDR_START; + address_markers[PKMAP_BASE_NR].start_address = PKMAP_BASE; # endif + address_markers[FIXADDR_START_NR].start_address = FIXADDR_START; #endif pe = debugfs_create_file("kernel_page_tables", 0600, NULL, NULL, diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 12e4d2d3c110..3ba6e0608c55 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -62,8 +62,8 @@ int ioremap_change_attr(unsigned long vaddr, unsigned long size, static void __iomem *__ioremap_caller(resource_size_t phys_addr, unsigned long size, unsigned long prot_val, void *caller) { - unsigned long pfn, offset, vaddr; - resource_size_t last_addr; + unsigned long offset, vaddr; + resource_size_t pfn, last_pfn, last_addr; const resource_size_t unaligned_phys_addr = phys_addr; const unsigned long unaligned_size = size; struct vm_struct *area; @@ -100,10 +100,8 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, /* * Don't allow anybody to remap normal RAM that we're using.. */ - for (pfn = phys_addr >> PAGE_SHIFT; - (pfn << PAGE_SHIFT) < (last_addr & PAGE_MASK); - pfn++) { - + last_pfn = last_addr >> PAGE_SHIFT; + for (pfn = phys_addr >> PAGE_SHIFT; pfn <= last_pfn; pfn++) { int is_ram = page_is_ram(pfn); if (is_ram && pfn_valid(pfn) && !PageReserved(pfn_to_page(pfn))) @@ -115,7 +113,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, * Mappings have to be page-aligned */ offset = phys_addr & ~PAGE_MASK; - phys_addr &= PAGE_MASK; + phys_addr &= PHYSICAL_PAGE_MASK; size = PAGE_ALIGN(last_addr+1) - phys_addr; retval = reserve_memtype(phys_addr, (u64)phys_addr + size, @@ -613,7 +611,7 @@ void __init early_iounmap(void __iomem *addr, unsigned long size) return; } offset = virt_addr & ~PAGE_MASK; - nrpages = PAGE_ALIGN(offset + size - 1) >> PAGE_SHIFT; + nrpages = PAGE_ALIGN(offset + size) >> PAGE_SHIFT; idx = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot; while (nrpages > 0) { diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 5d0e67fff1a6..e5d5e2ce9f77 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -45,6 +45,8 @@ struct kmmio_fault_page { * Protected by kmmio_lock, when linked into kmmio_page_table. */ int count; + + bool scheduled_for_release; }; struct kmmio_delayed_release { @@ -398,8 +400,11 @@ static void release_kmmio_fault_page(unsigned long page, BUG_ON(f->count < 0); if (!f->count) { disarm_kmmio_fault_page(f); - f->release_next = *release_list; - *release_list = f; + if (!f->scheduled_for_release) { + f->release_next = *release_list; + *release_list = f; + f->scheduled_for_release = true; + } } } @@ -471,8 +476,10 @@ static void remove_kmmio_fault_pages(struct rcu_head *head) prevp = &f->release_next; } else { *prevp = f->release_next; + f->release_next = NULL; + f->scheduled_for_release = false; } - f = f->release_next; + f = *prevp; } spin_unlock_irqrestore(&kmmio_lock, flags); @@ -510,6 +517,9 @@ void unregister_kmmio_probe(struct kmmio_probe *p) kmmio_count--; spin_unlock_irqrestore(&kmmio_lock, flags); + if (!release_list) + return; + drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); if (!drelease) { pr_crit("leaking kmmio_fault_page objects.\n"); diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 64121a18b8cb..f6ff57b7efa5 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -158,7 +158,7 @@ static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type) return req_type; } -static int pat_pagerange_is_ram(unsigned long start, unsigned long end) +static int pat_pagerange_is_ram(resource_size_t start, resource_size_t end) { int ram_page = 0, not_rampage = 0; unsigned long page_nr; diff --git a/arch/x86/mm/pf_in.c b/arch/x86/mm/pf_in.c index 308e32570d84..38e6d174c497 100644 --- a/arch/x86/mm/pf_in.c +++ b/arch/x86/mm/pf_in.c @@ -40,16 +40,16 @@ static unsigned char prefix_codes[] = { static unsigned int reg_rop[] = { 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F }; -static unsigned int reg_wop[] = { 0x88, 0x89 }; +static unsigned int reg_wop[] = { 0x88, 0x89, 0xAA, 0xAB }; static unsigned int imm_wop[] = { 0xC6, 0xC7 }; /* IA32 Manual 3, 3-432*/ -static unsigned int rw8[] = { 0x88, 0x8A, 0xC6 }; +static unsigned int rw8[] = { 0x88, 0x8A, 0xC6, 0xAA }; static unsigned int rw32[] = { - 0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F + 0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F, 0xAB }; -static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F }; +static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F, 0xAA }; static unsigned int mw16[] = { 0xB70F, 0xBF0F }; -static unsigned int mw32[] = { 0x89, 0x8B, 0xC7 }; +static unsigned int mw32[] = { 0x89, 0x8B, 0xC7, 0xAB }; static unsigned int mw64[] = {}; #else /* not __i386__ */ static unsigned char prefix_codes[] = { @@ -63,20 +63,20 @@ static unsigned char prefix_codes[] = { static unsigned int reg_rop[] = { 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F }; -static unsigned int reg_wop[] = { 0x88, 0x89 }; +static unsigned int reg_wop[] = { 0x88, 0x89, 0xAA, 0xAB }; static unsigned int imm_wop[] = { 0xC6, 0xC7 }; -static unsigned int rw8[] = { 0xC6, 0x88, 0x8A }; +static unsigned int rw8[] = { 0xC6, 0x88, 0x8A, 0xAA }; static unsigned int rw32[] = { - 0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F + 0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F, 0xAB }; /* 8 bit only */ -static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F }; +static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F, 0xAA }; /* 16 bit only */ static unsigned int mw16[] = { 0xB70F, 0xBF0F }; /* 16 or 32 bit */ static unsigned int mw32[] = { 0xC7 }; /* 16, 32 or 64 bit */ -static unsigned int mw64[] = { 0x89, 0x8B }; +static unsigned int mw64[] = { 0x89, 0x8B, 0xAB }; #endif /* not __i386__ */ struct prefix_bits { @@ -410,7 +410,6 @@ static unsigned long *get_reg_w32(int no, struct pt_regs *regs) unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs) { unsigned int opcode; - unsigned char mod_rm; int reg; unsigned char *p; struct prefix_bits prf; @@ -437,8 +436,13 @@ unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs) goto err; do_work: - mod_rm = *p; - reg = ((mod_rm >> 3) & 0x7) | (prf.rexr << 3); + /* for STOS, source register is fixed */ + if (opcode == 0xAA || opcode == 0xAB) { + reg = arg_AX; + } else { + unsigned char mod_rm = *p; + reg = ((mod_rm >> 3) & 0x7) | (prf.rexr << 3); + } switch (get_ins_reg_width(ins_addr)) { case 1: return *get_reg_w8(reg, prf.rex, regs); diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c index 8565d944f7cf..38868adf07ea 100644 --- a/arch/x86/mm/testmmiotrace.c +++ b/arch/x86/mm/testmmiotrace.c @@ -90,6 +90,27 @@ static void do_test(unsigned long size) iounmap(p); } +/* + * Tests how mmiotrace behaves in face of multiple ioremap / iounmaps in + * a short time. We had a bug in deferred freeing procedure which tried + * to free this region multiple times (ioremap can reuse the same address + * for many mappings). + */ +static void do_test_bulk_ioremapping(void) +{ + void __iomem *p; + int i; + + for (i = 0; i < 10; ++i) { + p = ioremap_nocache(mmio_address, PAGE_SIZE); + if (p) + iounmap(p); + } + + /* Force freeing. If it will crash we will know why. */ + synchronize_rcu(); +} + static int __init init(void) { unsigned long size = (read_far) ? (8 << 20) : (16 << 10); @@ -104,6 +125,7 @@ static int __init init(void) "and writing 16 kB of rubbish in there.\n", size >> 10, mmio_address); do_test(size); + do_test_bulk_ioremapping(); pr_info("All done.\n"); return 0; } diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 426f3a1a64d3..c03f14ab6667 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -278,11 +278,9 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) static void do_flush_tlb_all(void *info) { - unsigned long cpu = smp_processor_id(); - __flush_tlb_all(); if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY) - leave_mm(cpu); + leave_mm(smp_processor_id()); } void flush_tlb_all(void) diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index b28d2f1253bb..1ba67dc8006a 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -634,6 +634,18 @@ static int __init ppro_init(char **cpu_type) if (force_arch_perfmon && cpu_has_arch_perfmon) return 0; + /* + * Documentation on identifying Intel processors by CPU family + * and model can be found in the Intel Software Developer's + * Manuals (SDM): + * + * http://www.intel.com/products/processor/manuals/ + * + * As of May 2010 the documentation for this was in the: + * "Intel 64 and IA-32 Architectures Software Developer's + * Manual Volume 3B: System Programming Guide", "Table B-1 + * CPUID Signature Values of DisplayFamily_DisplayModel". + */ switch (cpu_model) { case 0 ... 2: *cpu_type = "i386/ppro"; @@ -655,12 +667,12 @@ static int __init ppro_init(char **cpu_type) case 15: case 23: *cpu_type = "i386/core_2"; break; + case 0x1a: case 0x2e: - case 26: spec = &op_arch_perfmon_spec; *cpu_type = "i386/core_i7"; break; - case 28: + case 0x1c: *cpu_type = "i386/atom"; break; default: diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 2ec04c424a62..15466c096ba5 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -34,6 +34,15 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = { DMI_MATCH(DMI_PRODUCT_NAME, "x3800"), }, }, + /* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */ + /* 2006 AMD HT/VIA system with two host bridges */ + { + .callback = set_use_crs, + .ident = "ASRock ALiveSATA2-GLAN", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"), + }, + }, {} }; diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 215a27ae050d..a0772af64efb 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -125,6 +125,23 @@ void __init dmi_check_skip_isa_align(void) static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) { struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE]; + struct resource *bar_r; + int bar; + + if (pci_probe & PCI_NOASSIGN_BARS) { + /* + * If the BIOS did not assign the BAR, zero out the + * resource so the kernel doesn't attmept to assign + * it later on in pci_assign_unassigned_resources + */ + for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) { + bar_r = &dev->resource[bar]; + if (bar_r->start == 0 && bar_r->end != 0) { + bar_r->flags = 0; + bar_r->end = 0; + } + } + } if (pci_probe & PCI_NOASSIGN_ROMS) { if (rom_r->parent) @@ -509,6 +526,9 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "norom")) { pci_probe |= PCI_NOASSIGN_ROMS; return NULL; + } else if (!strcmp(str, "nobar")) { + pci_probe |= PCI_NOASSIGN_BARS; + return NULL; } else if (!strcmp(str, "assign-busses")) { pci_probe |= PCI_ASSIGN_ALL_BUSSES; return NULL; diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 9810a0f76c91..f547ee05f715 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -989,7 +989,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin - 1, irq); /* Update IRQ for all devices with the same pirq value */ - while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) { + for_each_pci_dev(dev2) { pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin); if (!pin) continue; @@ -1028,7 +1028,7 @@ void __init pcibios_fixup_irqs(void) u8 pin; DBG(KERN_DEBUG "PCI: IRQ fixup\n"); - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + for_each_pci_dev(dev) { /* * If the BIOS has set an out of range IRQ number, just * ignore it. Also keep track of which IRQ's are @@ -1052,7 +1052,7 @@ void __init pcibios_fixup_irqs(void) return; dev = NULL; - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + for_each_pci_dev(dev) { pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); if (!pin) continue; diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c index 8d460eaf524f..c89266be6048 100644 --- a/arch/x86/pci/legacy.c +++ b/arch/x86/pci/legacy.c @@ -36,7 +36,7 @@ int __init pci_legacy_init(void) return 0; } -void pcibios_scan_specific_bus(int busn) +void __devinit pcibios_scan_specific_bus(int busn) { int devfn; long node; diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile index 6b4ffedb93c9..4a2afa1bac51 100644 --- a/arch/x86/vdso/Makefile +++ b/arch/x86/vdso/Makefile @@ -120,7 +120,8 @@ $(obj)/vdso32-syms.lds: $(vdso32.so-y:%=$(obj)/vdso32-%-syms.lds) FORCE quiet_cmd_vdso = VDSO $@ cmd_vdso = $(CC) -nostdlib -o $@ \ $(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \ - -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) + -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \ + sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@' VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) GCOV_PROFILE := n diff --git a/arch/x86/vdso/checkundef.sh b/arch/x86/vdso/checkundef.sh new file mode 100755 index 000000000000..7ee90a9b549d --- /dev/null +++ b/arch/x86/vdso/checkundef.sh @@ -0,0 +1,10 @@ +#!/bin/sh +nm="$1" +file="$2" +$nm "$file" | grep '^ *U' > /dev/null 2>&1 +if [ $? -eq 1 ]; then + exit 0 +else + echo "$file: undefined symbols found" >&2 + exit 1 +fi diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c index 02b442e92007..36df991985b2 100644 --- a/arch/x86/vdso/vdso32-setup.c +++ b/arch/x86/vdso/vdso32-setup.c @@ -374,7 +374,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) #ifdef CONFIG_X86_64 -__initcall(sysenter_setup); +subsys_initcall(sysenter_setup); #ifdef CONFIG_SYSCTL /* Register vsyscall32 into the ABI table */ diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index ac74869b8140..4b5d26f108bb 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -67,6 +67,7 @@ static int __init init_vdso_vars(void) *(typeof(__ ## x) **) var_ref(VDSO64_SYMBOL(vbase, x), #x) = &__ ## x; #include "vextern.h" #undef VEXTERN + vunmap(vbase); return 0; oom: @@ -74,7 +75,7 @@ static int __init init_vdso_vars(void) vdso_enabled = 0; return -ENOMEM; } -__initcall(init_vdso_vars); +subsys_initcall(init_vdso_vars); struct linux_binprm; diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index b83e119fbeb0..68128a1b401a 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -13,6 +13,11 @@ config XEN kernel to boot in a paravirtualized environment under the Xen hypervisor. +config XEN_PVHVM + def_bool y + depends on XEN + depends on X86_LOCAL_APIC + config XEN_MAX_DOMAIN_MEMORY int "Maximum allowed size of a domain in gigabytes" default 8 if X86_32 diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3bb4fc21f4f2..930954685980 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -12,7 +12,7 @@ CFLAGS_mmu.o := $(nostackp) obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \ time.o xen-asm.o xen-asm_$(BITS).o \ - grant-table.o suspend.o + grant-table.o suspend.o platform-pci-unplug.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 65d8d79b46a8..d4ff5e83621d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -11,6 +11,7 @@ * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007 */ +#include <linux/cpu.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/smp.h> @@ -35,8 +36,10 @@ #include <xen/interface/version.h> #include <xen/interface/physdev.h> #include <xen/interface/vcpu.h> +#include <xen/interface/memory.h> #include <xen/features.h> #include <xen/page.h> +#include <xen/hvm.h> #include <xen/hvc-console.h> #include <asm/paravirt.h> @@ -55,7 +58,9 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> #include <asm/reboot.h> +#include <asm/setup.h> #include <asm/stackprotector.h> +#include <asm/hypervisor.h> #include "xen-ops.h" #include "mmu.h" @@ -76,6 +81,10 @@ struct shared_info xen_dummy_shared_info; void *xen_initial_gdt; +RESERVE_BRK(shared_info_page_brk, PAGE_SIZE); +__read_mostly int xen_have_vector_callback; +EXPORT_SYMBOL_GPL(xen_have_vector_callback); + /* * Point at some empty memory to start with. We map the real shared_info * page as soon as fixmap is up and running. @@ -97,6 +106,14 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; */ static int have_vcpu_info_placement = 1; +static void clamp_max_cpus(void) +{ +#ifdef CONFIG_SMP + if (setup_max_cpus > MAX_VIRT_CPUS) + setup_max_cpus = MAX_VIRT_CPUS; +#endif +} + static void xen_vcpu_setup(int cpu) { struct vcpu_register_vcpu_info info; @@ -104,13 +121,17 @@ static void xen_vcpu_setup(int cpu) struct vcpu_info *vcpup; BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); - per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; - if (!have_vcpu_info_placement) - return; /* already tested, not available */ + if (cpu < MAX_VIRT_CPUS) + per_cpu(xen_vcpu,cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; - vcpup = &per_cpu(xen_vcpu_info, cpu); + if (!have_vcpu_info_placement) { + if (cpu >= MAX_VIRT_CPUS) + clamp_max_cpus(); + return; + } + vcpup = &per_cpu(xen_vcpu_info, cpu); info.mfn = arbitrary_virt_to_mfn(vcpup); info.offset = offset_in_page(vcpup); @@ -125,6 +146,7 @@ static void xen_vcpu_setup(int cpu) if (err) { printk(KERN_DEBUG "register_vcpu_info failed: err=%d\n", err); have_vcpu_info_placement = 0; + clamp_max_cpus(); } else { /* This cpu is using the registered vcpu info, even if later ones fail to. */ @@ -731,7 +753,6 @@ static void set_xen_basic_apic_ops(void) #endif - static void xen_clts(void) { struct multicall_space mcs; @@ -926,10 +947,6 @@ static const struct pv_init_ops xen_init_ops __initdata = { .patch = xen_patch, }; -static const struct pv_time_ops xen_time_ops __initdata = { - .sched_clock = xen_sched_clock, -}; - static const struct pv_cpu_ops xen_cpu_ops __initdata = { .cpuid = xen_cpuid, @@ -1028,6 +1045,23 @@ static void xen_crash_shutdown(struct pt_regs *regs) xen_reboot(SHUTDOWN_crash); } +static int +xen_panic_event(struct notifier_block *this, unsigned long event, void *ptr) +{ + xen_reboot(SHUTDOWN_crash); + return NOTIFY_DONE; +} + +static struct notifier_block xen_panic_block = { + .notifier_call= xen_panic_event, +}; + +int xen_panic_handler_init(void) +{ + atomic_notifier_chain_register(&panic_notifier_list, &xen_panic_block); + return 0; +} + static const struct machine_ops __initdata xen_machine_ops = { .restart = xen_restart, .halt = xen_machine_halt, @@ -1067,7 +1101,6 @@ asmlinkage void __init xen_start_kernel(void) /* Install Xen paravirt ops */ pv_info = xen_info; pv_init_ops = xen_init_ops; - pv_time_ops = xen_time_ops; pv_cpu_ops = xen_cpu_ops; pv_apic_ops = xen_apic_ops; @@ -1075,13 +1108,7 @@ asmlinkage void __init xen_start_kernel(void) x86_init.oem.arch_setup = xen_arch_setup; x86_init.oem.banner = xen_banner; - x86_init.timers.timer_init = xen_time_init; - x86_init.timers.setup_percpu_clockev = x86_init_noop; - x86_cpuinit.setup_percpu_clockev = x86_init_noop; - - x86_platform.calibrate_tsc = xen_tsc_khz; - x86_platform.get_wallclock = xen_get_wallclock; - x86_platform.set_wallclock = xen_set_wallclock; + xen_init_time_ops(); /* * Set up some pagetable state before starting to set any ptes. @@ -1206,3 +1233,139 @@ asmlinkage void __init xen_start_kernel(void) x86_64_start_reservations((char *)__pa_symbol(&boot_params)); #endif } + +static uint32_t xen_cpuid_base(void) +{ + uint32_t base, eax, ebx, ecx, edx; + char signature[13]; + + for (base = 0x40000000; base < 0x40010000; base += 0x100) { + cpuid(base, &eax, &ebx, &ecx, &edx); + *(uint32_t *)(signature + 0) = ebx; + *(uint32_t *)(signature + 4) = ecx; + *(uint32_t *)(signature + 8) = edx; + signature[12] = 0; + + if (!strcmp("XenVMMXenVMM", signature) && ((eax - base) >= 2)) + return base; + } + + return 0; +} + +static int init_hvm_pv_info(int *major, int *minor) +{ + uint32_t eax, ebx, ecx, edx, pages, msr, base; + u64 pfn; + + base = xen_cpuid_base(); + cpuid(base + 1, &eax, &ebx, &ecx, &edx); + + *major = eax >> 16; + *minor = eax & 0xffff; + printk(KERN_INFO "Xen version %d.%d.\n", *major, *minor); + + cpuid(base + 2, &pages, &msr, &ecx, &edx); + + pfn = __pa(hypercall_page); + wrmsr_safe(msr, (u32)pfn, (u32)(pfn >> 32)); + + xen_setup_features(); + + pv_info = xen_info; + pv_info.kernel_rpl = 0; + + xen_domain_type = XEN_HVM_DOMAIN; + + return 0; +} + +void xen_hvm_init_shared_info(void) +{ + int cpu; + struct xen_add_to_physmap xatp; + static struct shared_info *shared_info_page = 0; + + if (!shared_info_page) + shared_info_page = (struct shared_info *) + extend_brk(PAGE_SIZE, PAGE_SIZE); + xatp.domid = DOMID_SELF; + xatp.idx = 0; + xatp.space = XENMAPSPACE_shared_info; + xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT; + if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp)) + BUG(); + + HYPERVISOR_shared_info = (struct shared_info *)shared_info_page; + + /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info + * page, we use it in the event channel upcall and in some pvclock + * related functions. We don't need the vcpu_info placement + * optimizations because we don't use any pv_mmu or pv_irq op on + * HVM. + * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is + * online but xen_hvm_init_shared_info is run at resume time too and + * in that case multiple vcpus might be online. */ + for_each_online_cpu(cpu) { + per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; + } +} + +#ifdef CONFIG_XEN_PVHVM +static int __cpuinit xen_hvm_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + int cpu = (long)hcpu; + switch (action) { + case CPU_UP_PREPARE: + per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; + break; + default: + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata xen_hvm_cpu_notifier = { + .notifier_call = xen_hvm_cpu_notify, +}; + +static void __init xen_hvm_guest_init(void) +{ + int r; + int major, minor; + + r = init_hvm_pv_info(&major, &minor); + if (r < 0) + return; + + xen_hvm_init_shared_info(); + + if (xen_feature(XENFEAT_hvm_callback_vector)) + xen_have_vector_callback = 1; + register_cpu_notifier(&xen_hvm_cpu_notifier); + xen_unplug_emulated_devices(); + have_vcpu_info_placement = 0; + x86_init.irqs.intr_init = xen_init_IRQ; + xen_hvm_init_time_ops(); + xen_hvm_init_mmu_ops(); +} + +static bool __init xen_hvm_platform(void) +{ + if (xen_pv_domain()) + return false; + + if (!xen_cpuid_base()) + return false; + + return true; +} + +const __refconst struct hypervisor_x86 x86_hyper_xen_hvm = { + .name = "Xen HVM", + .detect = xen_hvm_platform, + .init_platform = xen_hvm_guest_init, +}; +EXPORT_SYMBOL(x86_hyper_xen_hvm); +#endif diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 914f04695ce5..413b19b3d0fe 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -58,6 +58,7 @@ #include <xen/page.h> #include <xen/interface/xen.h> +#include <xen/interface/hvm/hvm_op.h> #include <xen/interface/version.h> #include <xen/hvc-console.h> @@ -1941,6 +1942,40 @@ void __init xen_init_mmu_ops(void) pv_mmu_ops = xen_mmu_ops; } +#ifdef CONFIG_XEN_PVHVM +static void xen_hvm_exit_mmap(struct mm_struct *mm) +{ + struct xen_hvm_pagetable_dying a; + int rc; + + a.domid = DOMID_SELF; + a.gpa = __pa(mm->pgd); + rc = HYPERVISOR_hvm_op(HVMOP_pagetable_dying, &a); + WARN_ON_ONCE(rc < 0); +} + +static int is_pagetable_dying_supported(void) +{ + struct xen_hvm_pagetable_dying a; + int rc = 0; + + a.domid = DOMID_SELF; + a.gpa = 0x00; + rc = HYPERVISOR_hvm_op(HVMOP_pagetable_dying, &a); + if (rc < 0) { + printk(KERN_DEBUG "HVMOP_pagetable_dying not supported\n"); + return 0; + } + return 1; +} + +void __init xen_hvm_init_mmu_ops(void) +{ + if (is_pagetable_dying_supported()) + pv_mmu_ops.exit_mmap = xen_hvm_exit_mmap; +} +#endif + #ifdef CONFIG_XEN_DEBUG_FS static struct dentry *d_mmu_debug; diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index 5fe6bc7f5ecf..fa938c4aa2f7 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -60,4 +60,5 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, unsigned long xen_read_cr2_direct(void); extern void xen_init_mmu_ops(void); +extern void xen_hvm_init_mmu_ops(void); #endif /* _XEN_MMU_H */ diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c new file mode 100644 index 000000000000..554c002a1e1a --- /dev/null +++ b/arch/x86/xen/platform-pci-unplug.c @@ -0,0 +1,137 @@ +/****************************************************************************** + * platform-pci-unplug.c + * + * Xen platform PCI device driver + * Copyright (c) 2010, Citrix + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> + +#include <xen/platform_pci.h> + +#define XEN_PLATFORM_ERR_MAGIC -1 +#define XEN_PLATFORM_ERR_PROTOCOL -2 +#define XEN_PLATFORM_ERR_BLACKLIST -3 + +/* store the value of xen_emul_unplug after the unplug is done */ +int xen_platform_pci_unplug; +EXPORT_SYMBOL_GPL(xen_platform_pci_unplug); +#ifdef CONFIG_XEN_PVHVM +static int xen_emul_unplug; + +static int __init check_platform_magic(void) +{ + short magic; + char protocol; + + magic = inw(XEN_IOPORT_MAGIC); + if (magic != XEN_IOPORT_MAGIC_VAL) { + printk(KERN_ERR "Xen Platform PCI: unrecognised magic value\n"); + return XEN_PLATFORM_ERR_MAGIC; + } + + protocol = inb(XEN_IOPORT_PROTOVER); + + printk(KERN_DEBUG "Xen Platform PCI: I/O protocol version %d\n", + protocol); + + switch (protocol) { + case 1: + outw(XEN_IOPORT_LINUX_PRODNUM, XEN_IOPORT_PRODNUM); + outl(XEN_IOPORT_LINUX_DRVVER, XEN_IOPORT_DRVVER); + if (inw(XEN_IOPORT_MAGIC) != XEN_IOPORT_MAGIC_VAL) { + printk(KERN_ERR "Xen Platform: blacklisted by host\n"); + return XEN_PLATFORM_ERR_BLACKLIST; + } + break; + default: + printk(KERN_WARNING "Xen Platform PCI: unknown I/O protocol version"); + return XEN_PLATFORM_ERR_PROTOCOL; + } + + return 0; +} + +void __init xen_unplug_emulated_devices(void) +{ + int r; + + /* check the version of the xen platform PCI device */ + r = check_platform_magic(); + /* If the version matches enable the Xen platform PCI driver. + * Also enable the Xen platform PCI driver if the version is really old + * and the user told us to ignore it. */ + if (r && !(r == XEN_PLATFORM_ERR_MAGIC && + (xen_emul_unplug & XEN_UNPLUG_IGNORE))) + return; + /* Set the default value of xen_emul_unplug depending on whether or + * not the Xen PV frontends and the Xen platform PCI driver have + * been compiled for this kernel (modules or built-in are both OK). */ + if (!xen_emul_unplug) { + if (xen_must_unplug_nics()) { + printk(KERN_INFO "Netfront and the Xen platform PCI driver have " + "been compiled for this kernel: unplug emulated NICs.\n"); + xen_emul_unplug |= XEN_UNPLUG_ALL_NICS; + } + if (xen_must_unplug_disks()) { + printk(KERN_INFO "Blkfront and the Xen platform PCI driver have " + "been compiled for this kernel: unplug emulated disks.\n" + "You might have to change the root device\n" + "from /dev/hd[a-d] to /dev/xvd[a-d]\n" + "in your root= kernel command line option\n"); + xen_emul_unplug |= XEN_UNPLUG_ALL_IDE_DISKS; + } + } + /* Now unplug the emulated devices */ + if (!(xen_emul_unplug & XEN_UNPLUG_IGNORE)) + outw(xen_emul_unplug, XEN_IOPORT_UNPLUG); + xen_platform_pci_unplug = xen_emul_unplug; +} + +static int __init parse_xen_emul_unplug(char *arg) +{ + char *p, *q; + int l; + + for (p = arg; p; p = q) { + q = strchr(p, ','); + if (q) { + l = q - p; + q++; + } else { + l = strlen(p); + } + if (!strncmp(p, "all", l)) + xen_emul_unplug |= XEN_UNPLUG_ALL; + else if (!strncmp(p, "ide-disks", l)) + xen_emul_unplug |= XEN_UNPLUG_ALL_IDE_DISKS; + else if (!strncmp(p, "aux-ide-disks", l)) + xen_emul_unplug |= XEN_UNPLUG_AUX_IDE_DISKS; + else if (!strncmp(p, "nics", l)) + xen_emul_unplug |= XEN_UNPLUG_ALL_NICS; + else if (!strncmp(p, "ignore", l)) + xen_emul_unplug |= XEN_UNPLUG_IGNORE; + else + printk(KERN_WARNING "unrecognised option '%s' " + "in parameter 'xen_emul_unplug'\n", p); + } + return 0; +} +early_param("xen_emul_unplug", parse_xen_emul_unplug); +#endif diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index ad0047f47cd4..328b00305426 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -20,6 +20,7 @@ #include <xen/page.h> #include <xen/interface/callback.h> #include <xen/interface/physdev.h> +#include <xen/interface/memory.h> #include <xen/features.h> #include "xen-ops.h" @@ -32,6 +33,73 @@ extern void xen_sysenter_target(void); extern void xen_syscall_target(void); extern void xen_syscall32_target(void); +static unsigned long __init xen_release_chunk(phys_addr_t start_addr, + phys_addr_t end_addr) +{ + struct xen_memory_reservation reservation = { + .address_bits = 0, + .extent_order = 0, + .domid = DOMID_SELF + }; + unsigned long start, end; + unsigned long len = 0; + unsigned long pfn; + int ret; + + start = PFN_UP(start_addr); + end = PFN_DOWN(end_addr); + + if (end <= start) + return 0; + + printk(KERN_INFO "xen_release_chunk: looking at area pfn %lx-%lx: ", + start, end); + for(pfn = start; pfn < end; pfn++) { + unsigned long mfn = pfn_to_mfn(pfn); + + /* Make sure pfn exists to start with */ + if (mfn == INVALID_P2M_ENTRY || mfn_to_pfn(mfn) != pfn) + continue; + + set_xen_guest_handle(reservation.extent_start, &mfn); + reservation.nr_extents = 1; + + ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, + &reservation); + WARN(ret != 1, "Failed to release memory %lx-%lx err=%d\n", + start, end, ret); + if (ret == 1) { + set_phys_to_machine(pfn, INVALID_P2M_ENTRY); + len++; + } + } + printk(KERN_CONT "%ld pages freed\n", len); + + return len; +} + +static unsigned long __init xen_return_unused_memory(unsigned long max_pfn, + const struct e820map *e820) +{ + phys_addr_t max_addr = PFN_PHYS(max_pfn); + phys_addr_t last_end = 0; + unsigned long released = 0; + int i; + + for (i = 0; i < e820->nr_map && last_end < max_addr; i++) { + phys_addr_t end = e820->map[i].addr; + end = min(max_addr, end); + + released += xen_release_chunk(last_end, end); + last_end = e820->map[i].addr + e820->map[i].size; + } + + if (last_end < max_addr) + released += xen_release_chunk(last_end, max_addr); + + printk(KERN_INFO "released %ld pages of unused memory\n", released); + return released; +} /** * machine_specific_memory_setup - Hook for machine specific memory setup. @@ -67,6 +135,8 @@ char * __init xen_memory_setup(void) sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + xen_return_unused_memory(xen_start_info->nr_pages, &e820); + return "Xen"; } @@ -156,6 +226,8 @@ void __init xen_arch_setup(void) struct physdev_set_iopl set_iopl; int rc; + xen_panic_handler_init(); + HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments); HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables); diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index a29693fd3138..25f232b18a82 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -394,6 +394,8 @@ static void stop_self(void *v) load_cr3(swapper_pg_dir); /* should set up a minimal gdt */ + set_cpu_online(cpu, false); + HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL); BUG(); } diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index a9c661108034..1d789d56877c 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -26,6 +26,18 @@ void xen_pre_suspend(void) BUG(); } +void xen_hvm_post_suspend(int suspend_cancelled) +{ + int cpu; + xen_hvm_init_shared_info(); + xen_callback_vector(); + if (xen_feature(XENFEAT_hvm_safe_pvclock)) { + for_each_online_cpu(cpu) { + xen_setup_runstate_info(cpu); + } + } +} + void xen_post_suspend(int suspend_cancelled) { xen_build_mfn_list_list(); diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index b3c6c59ed302..1a5353a753fc 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -20,6 +20,7 @@ #include <asm/xen/hypercall.h> #include <xen/events.h> +#include <xen/features.h> #include <xen/interface/xen.h> #include <xen/interface/vcpu.h> @@ -155,47 +156,8 @@ static void do_stolen_accounting(void) account_idle_ticks(ticks); } -/* - * Xen sched_clock implementation. Returns the number of unstolen - * nanoseconds, which is nanoseconds the VCPU spent in RUNNING+BLOCKED - * states. - */ -unsigned long long xen_sched_clock(void) -{ - struct vcpu_runstate_info state; - cycle_t now; - u64 ret; - s64 offset; - - /* - * Ideally sched_clock should be called on a per-cpu basis - * anyway, so preempt should already be disabled, but that's - * not current practice at the moment. - */ - preempt_disable(); - - now = xen_clocksource_read(); - - get_runstate_snapshot(&state); - - WARN_ON(state.state != RUNSTATE_running); - - offset = now - state.state_entry_time; - if (offset < 0) - offset = 0; - - ret = state.time[RUNSTATE_blocked] + - state.time[RUNSTATE_running] + - offset; - - preempt_enable(); - - return ret; -} - - /* Get the TSC speed from Xen */ -unsigned long xen_tsc_khz(void) +static unsigned long xen_tsc_khz(void) { struct pvclock_vcpu_time_info *info = &HYPERVISOR_shared_info->vcpu_info[0].time; @@ -230,7 +192,7 @@ static void xen_read_wallclock(struct timespec *ts) put_cpu_var(xen_vcpu); } -unsigned long xen_get_wallclock(void) +static unsigned long xen_get_wallclock(void) { struct timespec ts; @@ -238,7 +200,7 @@ unsigned long xen_get_wallclock(void) return ts.tv_sec; } -int xen_set_wallclock(unsigned long now) +static int xen_set_wallclock(unsigned long now) { /* do nothing for domU */ return -1; @@ -473,7 +435,11 @@ void xen_timer_resume(void) } } -__init void xen_time_init(void) +static const struct pv_time_ops xen_time_ops __initdata = { + .sched_clock = xen_clocksource_read, +}; + +static __init void xen_time_init(void) { int cpu = smp_processor_id(); struct timespec tp; @@ -497,3 +463,47 @@ __init void xen_time_init(void) xen_setup_timer(cpu); xen_setup_cpu_clockevents(); } + +__init void xen_init_time_ops(void) +{ + pv_time_ops = xen_time_ops; + + x86_init.timers.timer_init = xen_time_init; + x86_init.timers.setup_percpu_clockev = x86_init_noop; + x86_cpuinit.setup_percpu_clockev = x86_init_noop; + + x86_platform.calibrate_tsc = xen_tsc_khz; + x86_platform.get_wallclock = xen_get_wallclock; + x86_platform.set_wallclock = xen_set_wallclock; +} + +#ifdef CONFIG_XEN_PVHVM +static void xen_hvm_setup_cpu_clockevents(void) +{ + int cpu = smp_processor_id(); + xen_setup_runstate_info(cpu); + xen_setup_timer(cpu); + xen_setup_cpu_clockevents(); +} + +__init void xen_hvm_init_time_ops(void) +{ + /* vector callback is needed otherwise we cannot receive interrupts + * on cpu > 0 */ + if (!xen_have_vector_callback && num_present_cpus() > 1) + return; + if (!xen_feature(XENFEAT_hvm_safe_pvclock)) { + printk(KERN_INFO "Xen doesn't support pvclock on HVM," + "disable pv timer\n"); + return; + } + + pv_time_ops = xen_time_ops; + x86_init.timers.setup_percpu_clockev = xen_time_init; + x86_cpuinit.setup_percpu_clockev = xen_hvm_setup_cpu_clockevents; + + x86_platform.calibrate_tsc = xen_tsc_khz; + x86_platform.get_wallclock = xen_get_wallclock; + x86_platform.set_wallclock = xen_set_wallclock; +} +#endif diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index f9153a300bce..7c8ab86163e9 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -38,6 +38,10 @@ void xen_enable_sysenter(void); void xen_enable_syscall(void); void xen_vcpu_restore(void); +void xen_callback_vector(void); +void xen_hvm_init_shared_info(void); +void __init xen_unplug_emulated_devices(void); + void __init xen_build_dynamic_phys_to_machine(void); void xen_init_irq_ops(void); @@ -46,11 +50,8 @@ void xen_setup_runstate_info(int cpu); void xen_teardown_timer(int cpu); cycle_t xen_clocksource_read(void); void xen_setup_cpu_clockevents(void); -unsigned long xen_tsc_khz(void); -void __init xen_time_init(void); -unsigned long xen_get_wallclock(void); -int xen_set_wallclock(unsigned long time); -unsigned long long xen_sched_clock(void); +void __init xen_init_time_ops(void); +void __init xen_hvm_init_time_ops(void); irqreturn_t xen_debug_interrupt(int irq, void *dev_id); @@ -101,4 +102,6 @@ void xen_sysret32(void); void xen_sysret64(void); void xen_adjust_exception_frame(void); +extern int xen_panic_handler_init(void); + #endif /* XEN_OPS_H */ diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index ebe228d02b08..0859bfd8ae93 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -48,9 +48,6 @@ config HZ int default 100 -config GENERIC_TIME - def_bool y - source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/xtensa/include/asm/local64.h b/arch/xtensa/include/asm/local64.h new file mode 100644 index 000000000000..36c93b5cc239 --- /dev/null +++ b/arch/xtensa/include/asm/local64.h @@ -0,0 +1 @@ +#include <asm-generic/local64.h> |