diff options
Diffstat (limited to 'arch/x86/kernel')
208 files changed, 77425 insertions, 0 deletions
diff --git a/arch/x86/kernel/.gitignore b/arch/x86/kernel/.gitignore new file mode 100644 index 000000000000..40836ad9079c --- /dev/null +++ b/arch/x86/kernel/.gitignore @@ -0,0 +1 @@ +vsyscall.lds diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile new file mode 100644 index 000000000000..45855c97923e --- /dev/null +++ b/arch/x86/kernel/Makefile @@ -0,0 +1,5 @@ +ifeq ($(CONFIG_X86_32),y) +include ${srctree}/arch/x86/kernel/Makefile_32 +else +include ${srctree}/arch/x86/kernel/Makefile_64 +endif diff --git a/arch/x86/kernel/Makefile_32 b/arch/x86/kernel/Makefile_32 new file mode 100644 index 000000000000..c624193740fd --- /dev/null +++ b/arch/x86/kernel/Makefile_32 @@ -0,0 +1,86 @@ +# +# Makefile for the linux kernel. +# + +extra-y := head_32.o init_task_32.o vmlinux.lds + +obj-y := process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \ + ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \ + pci-dma_32.o i386_ksyms_32.o i387_32.o bootflag.o e820_32.o\ + quirks.o i8237.o topology.o alternative.o i8253_32.o tsc_32.o + +obj-$(CONFIG_STACKTRACE) += stacktrace.o +obj-y += cpu/ +obj-y += acpi/ +obj-$(CONFIG_X86_BIOS_REBOOT) += reboot_32.o +obj-$(CONFIG_MCA) += mca_32.o +obj-$(CONFIG_X86_MSR) += msr.o +obj-$(CONFIG_X86_CPUID) += cpuid.o +obj-$(CONFIG_MICROCODE) += microcode.o +obj-$(CONFIG_APM) += apm_32.o +obj-$(CONFIG_X86_SMP) += smp_32.o smpboot_32.o tsc_sync.o +obj-$(CONFIG_SMP) += smpcommon_32.o +obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_32.o +obj-$(CONFIG_X86_MPPARSE) += mpparse_32.o +obj-$(CONFIG_X86_LOCAL_APIC) += apic_32.o nmi_32.o +obj-$(CONFIG_X86_IO_APIC) += io_apic_32.o +obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o +obj-$(CONFIG_KEXEC) += machine_kexec_32.o relocate_kernel_32.o crash_32.o +obj-$(CONFIG_CRASH_DUMP) += crash_dump_32.o +obj-$(CONFIG_X86_NUMAQ) += numaq_32.o +obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o +obj-$(CONFIG_KPROBES) += kprobes_32.o +obj-$(CONFIG_MODULES) += module_32.o +obj-y += sysenter_32.o vsyscall_32.o +obj-$(CONFIG_ACPI_SRAT) += srat_32.o +obj-$(CONFIG_EFI) += efi_32.o efi_stub_32.o +obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o +obj-$(CONFIG_VM86) += vm86_32.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_HPET_TIMER) += hpet_32.o +obj-$(CONFIG_K8_NB) += k8.o +obj-$(CONFIG_MGEODE_LX) += geode_32.o + +obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o +obj-$(CONFIG_PARAVIRT) += paravirt_32.o +obj-y += pcspeaker.o + +obj-$(CONFIG_SCx200) += scx200_32.o + +# vsyscall_32.o contains the vsyscall DSO images as __initdata. +# We must build both images before we can assemble it. +# Note: kbuild does not track this dependency due to usage of .incbin +$(obj)/vsyscall_32.o: $(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so +targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so) +targets += vsyscall-note_32.o vsyscall_32.lds + +# The DSO images are built using a special linker script. +quiet_cmd_syscall = SYSCALL $@ + cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \ + -Wl,-T,$(filter-out FORCE,$^) -o $@ + +export CPPFLAGS_vsyscall_32.lds += -P -C -U$(ARCH) + +vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) +SYSCFLAGS_vsyscall-sysenter_32.so = $(vsyscall-flags) +SYSCFLAGS_vsyscall-int80_32.so = $(vsyscall-flags) + +$(obj)/vsyscall-int80_32.so $(obj)/vsyscall-sysenter_32.so: \ +$(obj)/vsyscall-%.so: $(src)/vsyscall_32.lds \ + $(obj)/vsyscall-%.o $(obj)/vsyscall-note_32.o FORCE + $(call if_changed,syscall) + +# We also create a special relocatable object that should mirror the symbol +# table and layout of the linked DSO. With ld -R we can then refer to +# these symbols in the kernel code rather than hand-coded addresses. +extra-y += vsyscall-syms.o +$(obj)/built-in.o: $(obj)/vsyscall-syms.o +$(obj)/built-in.o: ld_flags += -R $(obj)/vsyscall-syms.o + +SYSCFLAGS_vsyscall-syms.o = -r +$(obj)/vsyscall-syms.o: $(src)/vsyscall_32.lds \ + $(obj)/vsyscall-sysenter_32.o $(obj)/vsyscall-note_32.o FORCE + $(call if_changed,syscall) + + diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64 new file mode 100644 index 000000000000..3ab017a0a3b9 --- /dev/null +++ b/arch/x86/kernel/Makefile_64 @@ -0,0 +1,54 @@ +# +# Makefile for the linux kernel. +# + +extra-y := head_64.o head64.o init_task_64.o vmlinux.lds +EXTRA_AFLAGS := -traditional +obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \ + ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \ + x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \ + setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \ + pci-dma_64.o pci-nommu_64.o alternative.o hpet_64.o tsc_64.o bugs_64.o \ + perfctr-watchdog.o + +obj-$(CONFIG_STACKTRACE) += stacktrace.o +obj-$(CONFIG_X86_MCE) += mce_64.o therm_throt.o +obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o +obj-$(CONFIG_X86_MCE_AMD) += mce_amd_64.o +obj-$(CONFIG_MTRR) += cpu/mtrr/ +obj-$(CONFIG_ACPI) += acpi/ +obj-$(CONFIG_X86_MSR) += msr.o +obj-$(CONFIG_MICROCODE) += microcode.o +obj-$(CONFIG_X86_CPUID) += cpuid.o +obj-$(CONFIG_SMP) += smp_64.o smpboot_64.o trampoline_64.o tsc_sync.o +obj-y += apic_64.o nmi_64.o +obj-y += io_apic_64.o mpparse_64.o genapic_64.o genapic_flat_64.o +obj-$(CONFIG_KEXEC) += machine_kexec_64.o relocate_kernel_64.o crash_64.o +obj-$(CONFIG_CRASH_DUMP) += crash_dump_64.o +obj-$(CONFIG_PM) += suspend_64.o +obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o +obj-$(CONFIG_CPU_FREQ) += cpu/cpufreq/ +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_IOMMU) += pci-gart_64.o aperture_64.o +obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o +obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o +obj-$(CONFIG_KPROBES) += kprobes_64.o +obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o +obj-$(CONFIG_X86_VSMP) += vsmp_64.o +obj-$(CONFIG_K8_NB) += k8.o +obj-$(CONFIG_AUDIT) += audit_64.o + +obj-$(CONFIG_MODULES) += module_64.o +obj-$(CONFIG_PCI) += early-quirks_64.o + +obj-y += topology.o +obj-y += intel_cacheinfo.o +obj-y += addon_cpuid_features.o +obj-y += pcspeaker.o + +CFLAGS_vsyscall_64.o := $(PROFILING) -g0 + +therm_throt-y += cpu/mcheck/therm_throt.o +intel_cacheinfo-y += cpu/intel_cacheinfo.o +addon_cpuid_features-y += cpu/addon_cpuid_features.o +perfctr-watchdog-y += cpu/perfctr-watchdog.o diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile new file mode 100644 index 000000000000..3d5671939542 --- /dev/null +++ b/arch/x86/kernel/acpi/Makefile @@ -0,0 +1,5 @@ +ifeq ($(CONFIG_X86_32),y) +include ${srctree}/arch/x86/kernel/acpi/Makefile_32 +else +include ${srctree}/arch/x86/kernel/acpi/Makefile_64 +endif diff --git a/arch/x86/kernel/acpi/Makefile_32 b/arch/x86/kernel/acpi/Makefile_32 new file mode 100644 index 000000000000..a4852a2e9190 --- /dev/null +++ b/arch/x86/kernel/acpi/Makefile_32 @@ -0,0 +1,10 @@ +obj-$(CONFIG_ACPI) += boot.o +ifneq ($(CONFIG_PCI),) +obj-$(CONFIG_X86_IO_APIC) += earlyquirk_32.o +endif +obj-$(CONFIG_ACPI_SLEEP) += sleep_32.o wakeup_32.o + +ifneq ($(CONFIG_ACPI_PROCESSOR),) +obj-y += cstate.o processor.o +endif + diff --git a/arch/x86/kernel/acpi/Makefile_64 b/arch/x86/kernel/acpi/Makefile_64 new file mode 100644 index 000000000000..629425bc002d --- /dev/null +++ b/arch/x86/kernel/acpi/Makefile_64 @@ -0,0 +1,7 @@ +obj-y := boot.o +obj-$(CONFIG_ACPI_SLEEP) += sleep_64.o wakeup_64.o + +ifneq ($(CONFIG_ACPI_PROCESSOR),) +obj-y += processor.o cstate.o +endif + diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c new file mode 100644 index 000000000000..afd2afe9102d --- /dev/null +++ b/arch/x86/kernel/acpi/boot.c @@ -0,0 +1,1326 @@ +/* + * boot.c - Architecture-Specific Low-Level ACPI Boot Support + * + * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> + * Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/acpi_pmtmr.h> +#include <linux/efi.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/dmi.h> +#include <linux/irq.h> +#include <linux/bootmem.h> +#include <linux/ioport.h> + +#include <asm/pgtable.h> +#include <asm/io_apic.h> +#include <asm/apic.h> +#include <asm/io.h> +#include <asm/mpspec.h> + +static int __initdata acpi_force = 0; + +#ifdef CONFIG_ACPI +int acpi_disabled = 0; +#else +int acpi_disabled = 1; +#endif +EXPORT_SYMBOL(acpi_disabled); + +#ifdef CONFIG_X86_64 + +#include <asm/proto.h> + +static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; } + + +#else /* X86 */ + +#ifdef CONFIG_X86_LOCAL_APIC +#include <mach_apic.h> +#include <mach_mpparse.h> +#endif /* CONFIG_X86_LOCAL_APIC */ + +#endif /* X86 */ + +#define BAD_MADT_ENTRY(entry, end) ( \ + (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ + ((struct acpi_subtable_header *)entry)->length < sizeof(*entry)) + +#define PREFIX "ACPI: " + +int acpi_noirq; /* skip ACPI IRQ initialization */ +int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ +int acpi_ht __initdata = 1; /* enable HT */ + +int acpi_lapic; +int acpi_ioapic; +int acpi_strict; +EXPORT_SYMBOL(acpi_strict); + +u8 acpi_sci_flags __initdata; +int acpi_sci_override_gsi __initdata; +int acpi_skip_timer_override __initdata; +int acpi_use_timer_override __initdata; + +#ifdef CONFIG_X86_LOCAL_APIC +static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; +#endif + +#ifndef __HAVE_ARCH_CMPXCHG +#warning ACPI uses CMPXCHG, i486 and later hardware +#endif + +/* -------------------------------------------------------------------------- + Boot-time Configuration + -------------------------------------------------------------------------- */ + +/* + * The default interrupt routing model is PIC (8259). This gets + * overriden if IOAPICs are enumerated (below). + */ +enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; + +#ifdef CONFIG_X86_64 + +/* rely on all ACPI tables being in the direct mapping */ +char *__acpi_map_table(unsigned long phys_addr, unsigned long size) +{ + if (!phys_addr || !size) + return NULL; + + if (phys_addr+size <= (end_pfn_map << PAGE_SHIFT) + PAGE_SIZE) + return __va(phys_addr); + + return NULL; +} + +#else + +/* + * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END, + * to map the target physical address. The problem is that set_fixmap() + * provides a single page, and it is possible that the page is not + * sufficient. + * By using this area, we can map up to MAX_IO_APICS pages temporarily, + * i.e. until the next __va_range() call. + * + * Important Safety Note: The fixed I/O APIC page numbers are *subtracted* + * from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and + * count idx down while incrementing the phys address. + */ +char *__acpi_map_table(unsigned long phys, unsigned long size) +{ + unsigned long base, offset, mapped_size; + int idx; + + if (phys + size < 8 * 1024 * 1024) + return __va(phys); + + offset = phys & (PAGE_SIZE - 1); + mapped_size = PAGE_SIZE - offset; + set_fixmap(FIX_ACPI_END, phys); + base = fix_to_virt(FIX_ACPI_END); + + /* + * Most cases can be covered by the below. + */ + idx = FIX_ACPI_END; + while (mapped_size < size) { + if (--idx < FIX_ACPI_BEGIN) + return NULL; /* cannot handle this */ + phys += PAGE_SIZE; + set_fixmap(idx, phys); + mapped_size += PAGE_SIZE; + } + + return ((unsigned char *)base + offset); +} +#endif + +#ifdef CONFIG_PCI_MMCONFIG +/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ +struct acpi_mcfg_allocation *pci_mmcfg_config; +int pci_mmcfg_config_num; + +int __init acpi_parse_mcfg(struct acpi_table_header *header) +{ + struct acpi_table_mcfg *mcfg; + unsigned long i; + int config_size; + + if (!header) + return -EINVAL; + + mcfg = (struct acpi_table_mcfg *)header; + + /* how many config structures do we have */ + pci_mmcfg_config_num = 0; + i = header->length - sizeof(struct acpi_table_mcfg); + while (i >= sizeof(struct acpi_mcfg_allocation)) { + ++pci_mmcfg_config_num; + i -= sizeof(struct acpi_mcfg_allocation); + }; + if (pci_mmcfg_config_num == 0) { + printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); + return -ENODEV; + } + + config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); + pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); + if (!pci_mmcfg_config) { + printk(KERN_WARNING PREFIX + "No memory for MCFG config tables\n"); + return -ENOMEM; + } + + memcpy(pci_mmcfg_config, &mcfg[1], config_size); + for (i = 0; i < pci_mmcfg_config_num; ++i) { + if (pci_mmcfg_config[i].address > 0xFFFFFFFF) { + printk(KERN_ERR PREFIX + "MMCONFIG not in low 4GB of memory\n"); + kfree(pci_mmcfg_config); + pci_mmcfg_config_num = 0; + return -ENODEV; + } + } + + return 0; +} +#endif /* CONFIG_PCI_MMCONFIG */ + +#ifdef CONFIG_X86_LOCAL_APIC +static int __init acpi_parse_madt(struct acpi_table_header *table) +{ + struct acpi_table_madt *madt = NULL; + + if (!cpu_has_apic) + return -EINVAL; + + madt = (struct acpi_table_madt *)table; + if (!madt) { + printk(KERN_WARNING PREFIX "Unable to map MADT\n"); + return -ENODEV; + } + + if (madt->address) { + acpi_lapic_addr = (u64) madt->address; + + printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n", + madt->address); + } + + acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id); + + return 0; +} + +static int __init +acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end) +{ + struct acpi_madt_local_apic *processor = NULL; + + processor = (struct acpi_madt_local_apic *)header; + + if (BAD_MADT_ENTRY(processor, end)) + return -EINVAL; + + acpi_table_print_madt_entry(header); + + /* + * We need to register disabled CPU as well to permit + * counting disabled CPUs. This allows us to size + * cpus_possible_map more accurately, to permit + * to not preallocating memory for all NR_CPUS + * when we use CPU hotplug. + */ + mp_register_lapic(processor->id, /* APIC ID */ + processor->lapic_flags & ACPI_MADT_ENABLED); /* Enabled? */ + + return 0; +} + +static int __init +acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header, + const unsigned long end) +{ + struct acpi_madt_local_apic_override *lapic_addr_ovr = NULL; + + lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header; + + if (BAD_MADT_ENTRY(lapic_addr_ovr, end)) + return -EINVAL; + + acpi_lapic_addr = lapic_addr_ovr->address; + + return 0; +} + +static int __init +acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end) +{ + struct acpi_madt_local_apic_nmi *lapic_nmi = NULL; + + lapic_nmi = (struct acpi_madt_local_apic_nmi *)header; + + if (BAD_MADT_ENTRY(lapic_nmi, end)) + return -EINVAL; + + acpi_table_print_madt_entry(header); + + if (lapic_nmi->lint != 1) + printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n"); + + return 0; +} + +#endif /*CONFIG_X86_LOCAL_APIC */ + +#ifdef CONFIG_X86_IO_APIC + +static int __init +acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end) +{ + struct acpi_madt_io_apic *ioapic = NULL; + + ioapic = (struct acpi_madt_io_apic *)header; + + if (BAD_MADT_ENTRY(ioapic, end)) + return -EINVAL; + + acpi_table_print_madt_entry(header); + + mp_register_ioapic(ioapic->id, + ioapic->address, ioapic->global_irq_base); + + return 0; +} + +/* + * Parse Interrupt Source Override for the ACPI SCI + */ +static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) +{ + if (trigger == 0) /* compatible SCI trigger is level */ + trigger = 3; + + if (polarity == 0) /* compatible SCI polarity is low */ + polarity = 3; + + /* Command-line over-ride via acpi_sci= */ + if (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) + trigger = (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2; + + if (acpi_sci_flags & ACPI_MADT_POLARITY_MASK) + polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK; + + /* + * mp_config_acpi_legacy_irqs() already setup IRQs < 16 + * If GSI is < 16, this will update its flags, + * else it will create a new mp_irqs[] entry. + */ + mp_override_legacy_irq(gsi, polarity, trigger, gsi); + + /* + * stash over-ride to indicate we've been here + * and for later update of acpi_gbl_FADT + */ + acpi_sci_override_gsi = gsi; + return; +} + +static int __init +acpi_parse_int_src_ovr(struct acpi_subtable_header * header, + const unsigned long end) +{ + struct acpi_madt_interrupt_override *intsrc = NULL; + + intsrc = (struct acpi_madt_interrupt_override *)header; + + if (BAD_MADT_ENTRY(intsrc, end)) + return -EINVAL; + + acpi_table_print_madt_entry(header); + + if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) { + acpi_sci_ioapic_setup(intsrc->global_irq, + intsrc->inti_flags & ACPI_MADT_POLARITY_MASK, + (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2); + return 0; + } + + if (acpi_skip_timer_override && + intsrc->source_irq == 0 && intsrc->global_irq == 2) { + printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + return 0; + } + + mp_override_legacy_irq(intsrc->source_irq, + intsrc->inti_flags & ACPI_MADT_POLARITY_MASK, + (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2, + intsrc->global_irq); + + return 0; +} + +static int __init +acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end) +{ + struct acpi_madt_nmi_source *nmi_src = NULL; + + nmi_src = (struct acpi_madt_nmi_source *)header; + + if (BAD_MADT_ENTRY(nmi_src, end)) + return -EINVAL; + + acpi_table_print_madt_entry(header); + + /* TBD: Support nimsrc entries? */ + + return 0; +} + +#endif /* CONFIG_X86_IO_APIC */ + +/* + * acpi_pic_sci_set_trigger() + * + * use ELCR to set PIC-mode trigger type for SCI + * + * If a PIC-mode SCI is not recognized or gives spurious IRQ7's + * it may require Edge Trigger -- use "acpi_sci=edge" + * + * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers + * for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge. + * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0) + * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0) + */ + +void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) +{ + unsigned int mask = 1 << irq; + unsigned int old, new; + + /* Real old ELCR mask */ + old = inb(0x4d0) | (inb(0x4d1) << 8); + + /* + * If we use ACPI to set PCI irq's, then we should clear ELCR + * since we will set it correctly as we enable the PCI irq + * routing. + */ + new = acpi_noirq ? old : 0; + + /* + * Update SCI information in the ELCR, it isn't in the PCI + * routing tables.. + */ + switch (trigger) { + case 1: /* Edge - clear */ + new &= ~mask; + break; + case 3: /* Level - set */ + new |= mask; + break; + } + + if (old == new) + return; + + printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old); + outb(new, 0x4d0); + outb(new >> 8, 0x4d1); +} + +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) +{ + *irq = gsi; + return 0; +} + +/* + * success: return IRQ number (>=0) + * failure: return < 0 + */ +int acpi_register_gsi(u32 gsi, int triggering, int polarity) +{ + unsigned int irq; + unsigned int plat_gsi = gsi; + +#ifdef CONFIG_PCI + /* + * Make sure all (legacy) PCI IRQs are set as level-triggered. + */ + if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { + extern void eisa_set_level_irq(unsigned int irq); + + if (triggering == ACPI_LEVEL_SENSITIVE) + eisa_set_level_irq(gsi); + } +#endif + +#ifdef CONFIG_X86_IO_APIC + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) { + plat_gsi = mp_register_gsi(gsi, triggering, polarity); + } +#endif + acpi_gsi_to_irq(plat_gsi, &irq); + return irq; +} + +EXPORT_SYMBOL(acpi_register_gsi); + +/* + * ACPI based hotplug support for CPU + */ +#ifdef CONFIG_ACPI_HOTPLUG_CPU +int acpi_map_lsapic(acpi_handle handle, int *pcpu) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + struct acpi_madt_local_apic *lapic; + cpumask_t tmp_map, new_map; + u8 physid; + int cpu; + + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) + return -EINVAL; + + if (!buffer.length || !buffer.pointer) + return -EINVAL; + + obj = buffer.pointer; + if (obj->type != ACPI_TYPE_BUFFER || + obj->buffer.length < sizeof(*lapic)) { + kfree(buffer.pointer); + return -EINVAL; + } + + lapic = (struct acpi_madt_local_apic *)obj->buffer.pointer; + + if (lapic->header.type != ACPI_MADT_TYPE_LOCAL_APIC || + !(lapic->lapic_flags & ACPI_MADT_ENABLED)) { + kfree(buffer.pointer); + return -EINVAL; + } + + physid = lapic->id; + + kfree(buffer.pointer); + buffer.length = ACPI_ALLOCATE_BUFFER; + buffer.pointer = NULL; + + tmp_map = cpu_present_map; + mp_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED); + + /* + * If mp_register_lapic successfully generates a new logical cpu + * number, then the following will get us exactly what was mapped + */ + cpus_andnot(new_map, cpu_present_map, tmp_map); + if (cpus_empty(new_map)) { + printk ("Unable to map lapic to logical cpu number\n"); + return -EINVAL; + } + + cpu = first_cpu(new_map); + + *pcpu = cpu; + return 0; +} + +EXPORT_SYMBOL(acpi_map_lsapic); + +int acpi_unmap_lsapic(int cpu) +{ + x86_cpu_to_apicid[cpu] = -1; + cpu_clear(cpu, cpu_present_map); + num_processors--; + + return (0); +} + +EXPORT_SYMBOL(acpi_unmap_lsapic); +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ + +int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) +{ + /* TBD */ + return -EINVAL; +} + +EXPORT_SYMBOL(acpi_register_ioapic); + +int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) +{ + /* TBD */ + return -EINVAL; +} + +EXPORT_SYMBOL(acpi_unregister_ioapic); + +static unsigned long __init +acpi_scan_rsdp(unsigned long start, unsigned long length) +{ + unsigned long offset = 0; + unsigned long sig_len = sizeof("RSD PTR ") - 1; + + /* + * Scan all 16-byte boundaries of the physical memory region for the + * RSDP signature. + */ + for (offset = 0; offset < length; offset += 16) { + if (strncmp((char *)(phys_to_virt(start) + offset), "RSD PTR ", sig_len)) + continue; + return (start + offset); + } + + return 0; +} + +static int __init acpi_parse_sbf(struct acpi_table_header *table) +{ + struct acpi_table_boot *sb; + + sb = (struct acpi_table_boot *)table; + if (!sb) { + printk(KERN_WARNING PREFIX "Unable to map SBF\n"); + return -ENODEV; + } + + sbf_port = sb->cmos_index; /* Save CMOS port */ + + return 0; +} + +#ifdef CONFIG_HPET_TIMER +#include <asm/hpet.h> + +static struct __initdata resource *hpet_res; + +static int __init acpi_parse_hpet(struct acpi_table_header *table) +{ + struct acpi_table_hpet *hpet_tbl; + + hpet_tbl = (struct acpi_table_hpet *)table; + if (!hpet_tbl) { + printk(KERN_WARNING PREFIX "Unable to map HPET\n"); + return -ENODEV; + } + + if (hpet_tbl->address.space_id != ACPI_SPACE_MEM) { + printk(KERN_WARNING PREFIX "HPET timers must be located in " + "memory.\n"); + return -1; + } + + hpet_address = hpet_tbl->address.address; + printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", + hpet_tbl->id, hpet_address); + + /* + * Allocate and initialize the HPET firmware resource for adding into + * the resource tree during the lateinit timeframe. + */ +#define HPET_RESOURCE_NAME_SIZE 9 + hpet_res = alloc_bootmem(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE); + + if (!hpet_res) + return 0; + + memset(hpet_res, 0, sizeof(*hpet_res)); + hpet_res->name = (void *)&hpet_res[1]; + hpet_res->flags = IORESOURCE_MEM; + snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, "HPET %u", + hpet_tbl->sequence); + + hpet_res->start = hpet_address; + hpet_res->end = hpet_address + (1 * 1024) - 1; + + return 0; +} + +/* + * hpet_insert_resource inserts the HPET resources used into the resource + * tree. + */ +static __init int hpet_insert_resource(void) +{ + if (!hpet_res) + return 1; + + return insert_resource(&iomem_resource, hpet_res); +} + +late_initcall(hpet_insert_resource); + +#else +#define acpi_parse_hpet NULL +#endif + +static int __init acpi_parse_fadt(struct acpi_table_header *table) +{ + +#ifdef CONFIG_X86_PM_TIMER + /* detect the location of the ACPI PM Timer */ + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) { + /* FADT rev. 2 */ + if (acpi_gbl_FADT.xpm_timer_block.space_id != + ACPI_ADR_SPACE_SYSTEM_IO) + return 0; + + pmtmr_ioport = acpi_gbl_FADT.xpm_timer_block.address; + /* + * "X" fields are optional extensions to the original V1.0 + * fields, so we must selectively expand V1.0 fields if the + * corresponding X field is zero. + */ + if (!pmtmr_ioport) + pmtmr_ioport = acpi_gbl_FADT.pm_timer_block; + } else { + /* FADT rev. 1 */ + pmtmr_ioport = acpi_gbl_FADT.pm_timer_block; + } + if (pmtmr_ioport) + printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", + pmtmr_ioport); +#endif + return 0; +} + +unsigned long __init acpi_find_rsdp(void) +{ + unsigned long rsdp_phys = 0; + + if (efi_enabled) { + if (efi.acpi20 != EFI_INVALID_TABLE_ADDR) + return efi.acpi20; + else if (efi.acpi != EFI_INVALID_TABLE_ADDR) + return efi.acpi; + } + /* + * Scan memory looking for the RSDP signature. First search EBDA (low + * memory) paragraphs and then search upper memory (E0000-FFFFF). + */ + rsdp_phys = acpi_scan_rsdp(0, 0x400); + if (!rsdp_phys) + rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000); + + return rsdp_phys; +} + +#ifdef CONFIG_X86_LOCAL_APIC +/* + * Parse LAPIC entries in MADT + * returns 0 on success, < 0 on error + */ +static int __init acpi_parse_madt_lapic_entries(void) +{ + int count; + + if (!cpu_has_apic) + return -ENODEV; + + /* + * Note that the LAPIC address is obtained from the MADT (32-bit value) + * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value). + */ + + count = + acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, + acpi_parse_lapic_addr_ovr, 0); + if (count < 0) { + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); + return count; + } + + mp_register_lapic_address(acpi_lapic_addr); + + count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, acpi_parse_lapic, + MAX_APICS); + if (!count) { + printk(KERN_ERR PREFIX "No LAPIC entries present\n"); + /* TBD: Cleanup to allow fallback to MPS */ + return -ENODEV; + } else if (count < 0) { + printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n"); + /* TBD: Cleanup to allow fallback to MPS */ + return count; + } + + count = + acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0); + if (count < 0) { + printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); + /* TBD: Cleanup to allow fallback to MPS */ + return count; + } + return 0; +} +#endif /* CONFIG_X86_LOCAL_APIC */ + +#ifdef CONFIG_X86_IO_APIC +/* + * Parse IOAPIC related entries in MADT + * returns 0 on success, < 0 on error + */ +static int __init acpi_parse_madt_ioapic_entries(void) +{ + int count; + + /* + * ACPI interpreter is required to complete interrupt setup, + * so if it is off, don't enumerate the io-apics with ACPI. + * If MPS is present, it will handle them, + * otherwise the system will stay in PIC mode + */ + if (acpi_disabled || acpi_noirq) { + return -ENODEV; + } + + if (!cpu_has_apic) + return -ENODEV; + + /* + * if "noapic" boot option, don't look for IO-APICs + */ + if (skip_ioapic_setup) { + printk(KERN_INFO PREFIX "Skipping IOAPIC probe " + "due to 'noapic' option.\n"); + return -ENODEV; + } + + count = + acpi_table_parse_madt(ACPI_MADT_TYPE_IO_APIC, acpi_parse_ioapic, + MAX_IO_APICS); + if (!count) { + printk(KERN_ERR PREFIX "No IOAPIC entries present\n"); + return -ENODEV; + } else if (count < 0) { + printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n"); + return count; + } + + count = + acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, + NR_IRQ_VECTORS); + if (count < 0) { + printk(KERN_ERR PREFIX + "Error parsing interrupt source overrides entry\n"); + /* TBD: Cleanup to allow fallback to MPS */ + return count; + } + + /* + * If BIOS did not supply an INT_SRC_OVR for the SCI + * pretend we got one so we can set the SCI flags. + */ + if (!acpi_sci_override_gsi) + acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0); + + /* Fill in identity legacy mapings where no override */ + mp_config_acpi_legacy_irqs(); + + count = + acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, + NR_IRQ_VECTORS); + if (count < 0) { + printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); + /* TBD: Cleanup to allow fallback to MPS */ + return count; + } + + return 0; +} +#else +static inline int acpi_parse_madt_ioapic_entries(void) +{ + return -1; +} +#endif /* !CONFIG_X86_IO_APIC */ + +static void __init acpi_process_madt(void) +{ +#ifdef CONFIG_X86_LOCAL_APIC + int error; + + if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { + + /* + * Parse MADT LAPIC entries + */ + error = acpi_parse_madt_lapic_entries(); + if (!error) { + acpi_lapic = 1; + +#ifdef CONFIG_X86_GENERICARCH + generic_bigsmp_probe(); +#endif + /* + * Parse MADT IO-APIC entries + */ + error = acpi_parse_madt_ioapic_entries(); + if (!error) { + acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC; + acpi_irq_balance_set(NULL); + acpi_ioapic = 1; + + smp_found_config = 1; + setup_apic_routing(); + } + } + if (error == -EINVAL) { + /* + * Dell Precision Workstation 410, 610 come here. + */ + printk(KERN_ERR PREFIX + "Invalid BIOS MADT, disabling ACPI\n"); + disable_acpi(); + } + } +#endif + return; +} + +#ifdef __i386__ + +static int __init disable_acpi_irq(const struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n", + d->ident); + acpi_noirq_set(); + } + return 0; +} + +static int __init disable_acpi_pci(const struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n", + d->ident); + acpi_disable_pci(); + } + return 0; +} + +static int __init dmi_disable_acpi(const struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: acpi off\n", d->ident); + disable_acpi(); + } else { + printk(KERN_NOTICE + "Warning: DMI blacklist says broken, but acpi forced\n"); + } + return 0; +} + +/* + * Limit ACPI to CPU enumeration for HT + */ +static int __init force_acpi_ht(const struct dmi_system_id *d) +{ + if (!acpi_force) { + printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", + d->ident); + disable_acpi(); + acpi_ht = 1; + } else { + printk(KERN_NOTICE + "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); + } + return 0; +} + +/* + * If your system is blacklisted here, but you find that acpi=force + * works for you, please contact acpi-devel@sourceforge.net + */ +static struct dmi_system_id __initdata acpi_dmi_table[] = { + /* + * Boxes that need ACPI disabled + */ + { + .callback = dmi_disable_acpi, + .ident = "IBM Thinkpad", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2629H1G"), + }, + }, + + /* + * Boxes that need acpi=ht + */ + { + .callback = force_acpi_ht, + .ident = "FSC Primergy T850", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "HP VISUALIZE NT Workstation", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "Compaq Workstation W8000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ASUS P4B266", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4B266"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ASUS P2B-DS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ASUS CUR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "ABIT i440BX-W83977", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), + DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM Bladecenter", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM eServer xSeries 360", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 330", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), + }, + }, + { + .callback = force_acpi_ht, + .ident = "IBM eserver xSeries 440", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), + }, + }, + + /* + * Boxes that need ACPI PCI IRQ routing disabled + */ + { + .callback = disable_acpi_irq, + .ident = "ASUS A7V", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"), + DMI_MATCH(DMI_BOARD_NAME, "<A7V>"), + /* newer BIOS, Revision 1011, does work */ + DMI_MATCH(DMI_BIOS_VERSION, + "ASUS A7V ACPI BIOS Revision 1007"), + }, + }, + { + /* + * Latest BIOS for IBM 600E (1.16) has bad pcinum + * for LPC bridge, which is needed for the PCI + * interrupt links to work. DSDT fix is in bug 5966. + * 2645, 2646 model numbers are shared with 600/600E/600X + */ + .callback = disable_acpi_irq, + .ident = "IBM Thinkpad 600 Series 2645", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2645"), + }, + }, + { + .callback = disable_acpi_irq, + .ident = "IBM Thinkpad 600 Series 2646", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2646"), + }, + }, + /* + * Boxes that need ACPI PCI IRQ routing and PCI scan disabled + */ + { /* _BBN 0 bug */ + .callback = disable_acpi_pci, + .ident = "ASUS PR-DLS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"), + DMI_MATCH(DMI_BIOS_VERSION, + "ASUS PR-DLS ACPI BIOS Revision 1010"), + DMI_MATCH(DMI_BIOS_DATE, "03/21/2003") + }, + }, + { + .callback = disable_acpi_pci, + .ident = "Acer TravelMate 36x Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), + }, + }, + {} +}; + +#endif /* __i386__ */ + +/* + * acpi_boot_table_init() and acpi_boot_init() + * called from setup_arch(), always. + * 1. checksums all tables + * 2. enumerates lapics + * 3. enumerates io-apics + * + * acpi_table_init() is separate to allow reading SRAT without + * other side effects. + * + * side effects of acpi_boot_init: + * acpi_lapic = 1 if LAPIC found + * acpi_ioapic = 1 if IOAPIC found + * if (acpi_lapic && acpi_ioapic) smp_found_config = 1; + * if acpi_blacklisted() acpi_disabled = 1; + * acpi_irq_model=... + * ... + * + * return value: (currently ignored) + * 0: success + * !0: failure + */ + +int __init acpi_boot_table_init(void) +{ + int error; + +#ifdef __i386__ + dmi_check_system(acpi_dmi_table); +#endif + + /* + * If acpi_disabled, bail out + * One exception: acpi=ht continues far enough to enumerate LAPICs + */ + if (acpi_disabled && !acpi_ht) + return 1; + + /* + * Initialize the ACPI boot-time table parser. + */ + error = acpi_table_init(); + if (error) { + disable_acpi(); + return error; + } + + acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); + + /* + * blacklist may disable ACPI entirely + */ + error = acpi_blacklisted(); + if (error) { + if (acpi_force) { + printk(KERN_WARNING PREFIX "acpi=force override\n"); + } else { + printk(KERN_WARNING PREFIX "Disabling ACPI support\n"); + disable_acpi(); + return error; + } + } + + return 0; +} + +int __init acpi_boot_init(void) +{ + /* + * If acpi_disabled, bail out + * One exception: acpi=ht continues far enough to enumerate LAPICs + */ + if (acpi_disabled && !acpi_ht) + return 1; + + acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); + + /* + * set sci_int and PM timer address + */ + acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt); + + /* + * Process the Multiple APIC Description Table (MADT), if present + */ + acpi_process_madt(); + + acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet); + + return 0; +} + +static int __init parse_acpi(char *arg) +{ + if (!arg) + return -EINVAL; + + /* "acpi=off" disables both ACPI table parsing and interpreter */ + if (strcmp(arg, "off") == 0) { + disable_acpi(); + } + /* acpi=force to over-ride black-list */ + else if (strcmp(arg, "force") == 0) { + acpi_force = 1; + acpi_ht = 1; + acpi_disabled = 0; + } + /* acpi=strict disables out-of-spec workarounds */ + else if (strcmp(arg, "strict") == 0) { + acpi_strict = 1; + } + /* Limit ACPI just to boot-time to enable HT */ + else if (strcmp(arg, "ht") == 0) { + if (!acpi_force) + disable_acpi(); + acpi_ht = 1; + } + /* "acpi=noirq" disables ACPI interrupt routing */ + else if (strcmp(arg, "noirq") == 0) { + acpi_noirq_set(); + } else { + /* Core will printk when we return error. */ + return -EINVAL; + } + return 0; +} +early_param("acpi", parse_acpi); + +/* FIXME: Using pci= for an ACPI parameter is a travesty. */ +static int __init parse_pci(char *arg) +{ + if (arg && strcmp(arg, "noacpi") == 0) + acpi_disable_pci(); + return 0; +} +early_param("pci", parse_pci); + +#ifdef CONFIG_X86_IO_APIC +static int __init parse_acpi_skip_timer_override(char *arg) +{ + acpi_skip_timer_override = 1; + return 0; +} +early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override); + +static int __init parse_acpi_use_timer_override(char *arg) +{ + acpi_use_timer_override = 1; + return 0; +} +early_param("acpi_use_timer_override", parse_acpi_use_timer_override); +#endif /* CONFIG_X86_IO_APIC */ + +static int __init setup_acpi_sci(char *s) +{ + if (!s) + return -EINVAL; + if (!strcmp(s, "edge")) + acpi_sci_flags = ACPI_MADT_TRIGGER_EDGE | + (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK); + else if (!strcmp(s, "level")) + acpi_sci_flags = ACPI_MADT_TRIGGER_LEVEL | + (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK); + else if (!strcmp(s, "high")) + acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_HIGH | + (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK); + else if (!strcmp(s, "low")) + acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_LOW | + (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK); + else + return -EINVAL; + return 0; +} +early_param("acpi_sci", setup_acpi_sci); + +int __acpi_acquire_global_lock(unsigned int *lock) +{ + unsigned int old, new, val; + do { + old = *lock; + new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1)); + val = cmpxchg(lock, old, new); + } while (unlikely (val != old)); + return (new < 3) ? -1 : 0; +} + +int __acpi_release_global_lock(unsigned int *lock) +{ + unsigned int old, new, val; + do { + old = *lock; + new = old & ~0x3; + val = cmpxchg(lock, old, new); + } while (unlikely (val != old)); + return old & 0x1; +} diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c new file mode 100644 index 000000000000..2d39f55d29a8 --- /dev/null +++ b/arch/x86/kernel/acpi/cstate.c @@ -0,0 +1,164 @@ +/* + * arch/i386/kernel/acpi/cstate.c + * + * Copyright (C) 2005 Intel Corporation + * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + * - Added _PDC for SMP C-states on Intel CPUs + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/cpu.h> +#include <linux/sched.h> + +#include <acpi/processor.h> +#include <asm/acpi.h> + +/* + * Initialize bm_flags based on the CPU cache properties + * On SMP it depends on cache configuration + * - When cache is not shared among all CPUs, we flush cache + * before entering C3. + * - When cache is shared among all CPUs, we use bm_check + * mechanism as in UP case + * + * This routine is called only after all the CPUs are online + */ +void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, + unsigned int cpu) +{ + struct cpuinfo_x86 *c = cpu_data + cpu; + + flags->bm_check = 0; + if (num_online_cpus() == 1) + flags->bm_check = 1; + else if (c->x86_vendor == X86_VENDOR_INTEL) { + /* + * Today all CPUs that support C3 share cache. + * TBD: This needs to look at cache shared map, once + * multi-core detection patch makes to the base. + */ + flags->bm_check = 1; + } +} +EXPORT_SYMBOL(acpi_processor_power_init_bm_check); + +/* The code below handles cstate entry with monitor-mwait pair on Intel*/ + +struct cstate_entry { + struct { + unsigned int eax; + unsigned int ecx; + } states[ACPI_PROCESSOR_MAX_POWER]; +}; +static struct cstate_entry *cpu_cstate_entry; /* per CPU ptr */ + +static short mwait_supported[ACPI_PROCESSOR_MAX_POWER]; + +#define MWAIT_SUBSTATE_MASK (0xf) +#define MWAIT_SUBSTATE_SIZE (4) + +#define CPUID_MWAIT_LEAF (5) +#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1) +#define CPUID5_ECX_INTERRUPT_BREAK (0x2) + +#define MWAIT_ECX_INTERRUPT_BREAK (0x1) + +#define NATIVE_CSTATE_BEYOND_HALT (2) + +int acpi_processor_ffh_cstate_probe(unsigned int cpu, + struct acpi_processor_cx *cx, struct acpi_power_register *reg) +{ + struct cstate_entry *percpu_entry; + struct cpuinfo_x86 *c = cpu_data + cpu; + + cpumask_t saved_mask; + int retval; + unsigned int eax, ebx, ecx, edx; + unsigned int edx_part; + unsigned int cstate_type; /* C-state type and not ACPI C-state type */ + unsigned int num_cstate_subtype; + + if (!cpu_cstate_entry || c->cpuid_level < CPUID_MWAIT_LEAF ) + return -1; + + if (reg->bit_offset != NATIVE_CSTATE_BEYOND_HALT) + return -1; + + percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu); + percpu_entry->states[cx->index].eax = 0; + percpu_entry->states[cx->index].ecx = 0; + + /* Make sure we are running on right CPU */ + saved_mask = current->cpus_allowed; + retval = set_cpus_allowed(current, cpumask_of_cpu(cpu)); + if (retval) + return -1; + + cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx); + + /* Check whether this particular cx_type (in CST) is supported or not */ + cstate_type = (cx->address >> MWAIT_SUBSTATE_SIZE) + 1; + edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE); + num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK; + + retval = 0; + if (num_cstate_subtype < (cx->address & MWAIT_SUBSTATE_MASK)) { + retval = -1; + goto out; + } + + /* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */ + if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) || + !(ecx & CPUID5_ECX_INTERRUPT_BREAK)) { + retval = -1; + goto out; + } + percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK; + + /* Use the hint in CST */ + percpu_entry->states[cx->index].eax = cx->address; + + if (!mwait_supported[cstate_type]) { + mwait_supported[cstate_type] = 1; + printk(KERN_DEBUG "Monitor-Mwait will be used to enter C-%d " + "state\n", cx->type); + } + +out: + set_cpus_allowed(current, saved_mask); + return retval; +} +EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe); + +void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx) +{ + unsigned int cpu = smp_processor_id(); + struct cstate_entry *percpu_entry; + + percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu); + mwait_idle_with_hints(percpu_entry->states[cx->index].eax, + percpu_entry->states[cx->index].ecx); +} +EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_enter); + +static int __init ffh_cstate_init(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + if (c->x86_vendor != X86_VENDOR_INTEL) + return -1; + + cpu_cstate_entry = alloc_percpu(struct cstate_entry); + return 0; +} + +static void __exit ffh_cstate_exit(void) +{ + free_percpu(cpu_cstate_entry); + cpu_cstate_entry = NULL; +} + +arch_initcall(ffh_cstate_init); +__exitcall(ffh_cstate_exit); diff --git a/arch/x86/kernel/acpi/earlyquirk_32.c b/arch/x86/kernel/acpi/earlyquirk_32.c new file mode 100644 index 000000000000..23f78efc577d --- /dev/null +++ b/arch/x86/kernel/acpi/earlyquirk_32.c @@ -0,0 +1,84 @@ +/* + * Do early PCI probing for bug detection when the main PCI subsystem is + * not up yet. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/acpi.h> + +#include <asm/pci-direct.h> +#include <asm/acpi.h> +#include <asm/apic.h> + +#ifdef CONFIG_ACPI + +static int __init nvidia_hpet_check(struct acpi_table_header *header) +{ + return 0; +} +#endif + +static int __init check_bridge(int vendor, int device) +{ +#ifdef CONFIG_ACPI + static int warned; + /* According to Nvidia all timer overrides are bogus unless HPET + is enabled. */ + if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) { + if (!warned && acpi_table_parse(ACPI_SIG_HPET, + nvidia_hpet_check)) { + warned = 1; + acpi_skip_timer_override = 1; + printk(KERN_INFO "Nvidia board " + "detected. Ignoring ACPI " + "timer override.\n"); + printk(KERN_INFO "If you got timer trouble " + "try acpi_use_timer_override\n"); + + } + } +#endif + if (vendor == PCI_VENDOR_ID_ATI && timer_over_8254 == 1) { + timer_over_8254 = 0; + printk(KERN_INFO "ATI board detected. Disabling timer routing " + "over 8254.\n"); + } + return 0; +} + +void __init check_acpi_pci(void) +{ + int num, slot, func; + + /* Assume the machine supports type 1. If not it will + always read ffffffff and should not have any side effect. + Actually a few buggy systems can machine check. Allow the user + to disable it by command line option at least -AK */ + if (!early_pci_allowed()) + return; + + /* Poor man's PCI discovery */ + for (num = 0; num < 32; num++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + u32 class; + u32 vendor; + class = read_pci_config(num, slot, func, + PCI_CLASS_REVISION); + if (class == 0xffffffff) + break; + + if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) + continue; + + vendor = read_pci_config(num, slot, func, + PCI_VENDOR_ID); + + if (check_bridge(vendor & 0xffff, vendor >> 16)) + return; + } + + } + } +} diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c new file mode 100644 index 000000000000..b54fded49834 --- /dev/null +++ b/arch/x86/kernel/acpi/processor.c @@ -0,0 +1,75 @@ +/* + * arch/i386/kernel/acpi/processor.c + * + * Copyright (C) 2005 Intel Corporation + * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + * - Added _PDC for platforms with Intel CPUs + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/acpi.h> + +#include <acpi/processor.h> +#include <asm/acpi.h> + +static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) +{ + struct acpi_object_list *obj_list; + union acpi_object *obj; + u32 *buf; + + /* allocate and initialize pdc. It will be used later. */ + obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL); + if (!obj_list) { + printk(KERN_ERR "Memory allocation error\n"); + return; + } + + obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL); + if (!obj) { + printk(KERN_ERR "Memory allocation error\n"); + kfree(obj_list); + return; + } + + buf = kmalloc(12, GFP_KERNEL); + if (!buf) { + printk(KERN_ERR "Memory allocation error\n"); + kfree(obj); + kfree(obj_list); + return; + } + + buf[0] = ACPI_PDC_REVISION_ID; + buf[1] = 1; + buf[2] = ACPI_PDC_C_CAPABILITY_SMP; + + if (cpu_has(c, X86_FEATURE_EST)) + buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP; + + obj->type = ACPI_TYPE_BUFFER; + obj->buffer.length = 12; + obj->buffer.pointer = (u8 *) buf; + obj_list->count = 1; + obj_list->pointer = obj; + pr->pdc = obj_list; + + return; +} + +/* Initialize _PDC data based on the CPU vendor */ +void arch_acpi_processor_init_pdc(struct acpi_processor *pr) +{ + unsigned int cpu = pr->id; + struct cpuinfo_x86 *c = cpu_data + cpu; + + pr->pdc = NULL; + if (c->x86_vendor == X86_VENDOR_INTEL) + init_intel_pdc(pr, c); + + return; +} + +EXPORT_SYMBOL(arch_acpi_processor_init_pdc); diff --git a/arch/x86/kernel/acpi/sleep_32.c b/arch/x86/kernel/acpi/sleep_32.c new file mode 100644 index 000000000000..10699489cfe7 --- /dev/null +++ b/arch/x86/kernel/acpi/sleep_32.c @@ -0,0 +1,110 @@ +/* + * sleep.c - x86-specific ACPI sleep support. + * + * Copyright (C) 2001-2003 Patrick Mochel + * Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz> + */ + +#include <linux/acpi.h> +#include <linux/bootmem.h> +#include <linux/dmi.h> +#include <linux/cpumask.h> + +#include <asm/smp.h> + +/* address in low memory of the wakeup routine. */ +unsigned long acpi_wakeup_address = 0; +unsigned long acpi_realmode_flags; +extern char wakeup_start, wakeup_end; + +extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long)); + +/** + * acpi_save_state_mem - save kernel state + * + * Create an identity mapped page table and copy the wakeup routine to + * low memory. + */ +int acpi_save_state_mem(void) +{ + if (!acpi_wakeup_address) + return 1; + memcpy((void *)acpi_wakeup_address, &wakeup_start, + &wakeup_end - &wakeup_start); + acpi_copy_wakeup_routine(acpi_wakeup_address); + + return 0; +} + +/* + * acpi_restore_state - undo effects of acpi_save_state_mem + */ +void acpi_restore_state_mem(void) +{ +} + +/** + * acpi_reserve_bootmem - do _very_ early ACPI initialisation + * + * We allocate a page from the first 1MB of memory for the wakeup + * routine for when we come back from a sleep state. The + * runtime allocator allows specification of <16MB pages, but not + * <1MB pages. + */ +void __init acpi_reserve_bootmem(void) +{ + if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) { + printk(KERN_ERR + "ACPI: Wakeup code way too big, S3 disabled.\n"); + return; + } + + acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE); + if (!acpi_wakeup_address) + printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n"); +} + +static int __init acpi_sleep_setup(char *str) +{ + while ((str != NULL) && (*str != '\0')) { + if (strncmp(str, "s3_bios", 7) == 0) + acpi_realmode_flags |= 1; + if (strncmp(str, "s3_mode", 7) == 0) + acpi_realmode_flags |= 2; + if (strncmp(str, "s3_beep", 7) == 0) + acpi_realmode_flags |= 4; + str = strchr(str, ','); + if (str != NULL) + str += strspn(str, ", \t"); + } + return 1; +} + +__setup("acpi_sleep=", acpi_sleep_setup); + +/* Ouch, we want to delete this. We already have better version in userspace, in + s2ram from suspend.sf.net project */ +static __init int reset_videomode_after_s3(const struct dmi_system_id *d) +{ + acpi_realmode_flags |= 2; + return 0; +} + +static __initdata struct dmi_system_id acpisleep_dmi_table[] = { + { /* Reset video mode after returning from ACPI S3 sleep */ + .callback = reset_videomode_after_s3, + .ident = "Toshiba Satellite 4030cdt", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), + }, + }, + {} +}; + +static int __init acpisleep_dmi_init(void) +{ + dmi_check_system(acpisleep_dmi_table); + return 0; +} + +core_initcall(acpisleep_dmi_init); diff --git a/arch/x86/kernel/acpi/sleep_64.c b/arch/x86/kernel/acpi/sleep_64.c new file mode 100644 index 000000000000..79475d237071 --- /dev/null +++ b/arch/x86/kernel/acpi/sleep_64.c @@ -0,0 +1,120 @@ +/* + * acpi.c - Architecture-Specific Low-Level ACPI Support + * + * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> + * Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com> + * Copyright (C) 2001 Patrick Mochel <mochel@osdl.org> + * Copyright (C) 2002 Andi Kleen, SuSE Labs (x86-64 port) + * Copyright (C) 2003 Pavel Machek, SuSE Labs + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/stddef.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/bootmem.h> +#include <linux/acpi.h> +#include <linux/cpumask.h> + +#include <asm/mpspec.h> +#include <asm/io.h> +#include <asm/apic.h> +#include <asm/apicdef.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/io_apic.h> +#include <asm/proto.h> +#include <asm/tlbflush.h> + +/* -------------------------------------------------------------------------- + Low-Level Sleep Support + -------------------------------------------------------------------------- */ + +/* address in low memory of the wakeup routine. */ +unsigned long acpi_wakeup_address = 0; +unsigned long acpi_realmode_flags; +extern char wakeup_start, wakeup_end; + +extern unsigned long acpi_copy_wakeup_routine(unsigned long); + +/** + * acpi_save_state_mem - save kernel state + * + * Create an identity mapped page table and copy the wakeup routine to + * low memory. + */ +int acpi_save_state_mem(void) +{ + memcpy((void *)acpi_wakeup_address, &wakeup_start, + &wakeup_end - &wakeup_start); + acpi_copy_wakeup_routine(acpi_wakeup_address); + + return 0; +} + +/* + * acpi_restore_state + */ +void acpi_restore_state_mem(void) +{ +} + +/** + * acpi_reserve_bootmem - do _very_ early ACPI initialisation + * + * We allocate a page in low memory for the wakeup + * routine for when we come back from a sleep state. The + * runtime allocator allows specification of <16M pages, but not + * <1M pages. + */ +void __init acpi_reserve_bootmem(void) +{ + acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2); + if ((&wakeup_end - &wakeup_start) > (PAGE_SIZE*2)) + printk(KERN_CRIT + "ACPI: Wakeup code way too big, will crash on attempt" + " to suspend\n"); +} + +static int __init acpi_sleep_setup(char *str) +{ + while ((str != NULL) && (*str != '\0')) { + if (strncmp(str, "s3_bios", 7) == 0) + acpi_realmode_flags |= 1; + if (strncmp(str, "s3_mode", 7) == 0) + acpi_realmode_flags |= 2; + if (strncmp(str, "s3_beep", 7) == 0) + acpi_realmode_flags |= 4; + str = strchr(str, ','); + if (str != NULL) + str += strspn(str, ", \t"); + } + return 1; +} + +__setup("acpi_sleep=", acpi_sleep_setup); + +void acpi_pci_link_exit(void) +{ +} diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S new file mode 100644 index 000000000000..f22ba8534d26 --- /dev/null +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -0,0 +1,321 @@ +.text +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/page.h> + +# +# wakeup_code runs in real mode, and at unknown address (determined at run-time). +# Therefore it must only use relative jumps/calls. +# +# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled +# +# If physical address of wakeup_code is 0x12345, BIOS should call us with +# cs = 0x1234, eip = 0x05 +# + +#define BEEP \ + inb $97, %al; \ + outb %al, $0x80; \ + movb $3, %al; \ + outb %al, $97; \ + outb %al, $0x80; \ + movb $-74, %al; \ + outb %al, $67; \ + outb %al, $0x80; \ + movb $-119, %al; \ + outb %al, $66; \ + outb %al, $0x80; \ + movb $15, %al; \ + outb %al, $66; + +ALIGN + .align 4096 +ENTRY(wakeup_start) +wakeup_code: + wakeup_code_start = . + .code16 + + movw $0xb800, %ax + movw %ax,%fs + movw $0x0e00 + 'L', %fs:(0x10) + + cli + cld + + # setup data segment + movw %cs, %ax + movw %ax, %ds # Make ds:0 point to wakeup_start + movw %ax, %ss + + testl $4, realmode_flags - wakeup_code + jz 1f + BEEP +1: + mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board + movw $0x0e00 + 'S', %fs:(0x12) + + pushl $0 # Kill any dangerous flags + popfl + + movl real_magic - wakeup_code, %eax + cmpl $0x12345678, %eax + jne bogus_real_magic + + testl $1, realmode_flags - wakeup_code + jz 1f + lcall $0xc000,$3 + movw %cs, %ax + movw %ax, %ds # Bios might have played with that + movw %ax, %ss +1: + + testl $2, realmode_flags - wakeup_code + jz 1f + mov video_mode - wakeup_code, %ax + call mode_set +1: + + # set up page table + movl $swsusp_pg_dir-__PAGE_OFFSET, %eax + movl %eax, %cr3 + + testl $1, real_efer_save_restore - wakeup_code + jz 4f + # restore efer setting + movl real_save_efer_edx - wakeup_code, %edx + movl real_save_efer_eax - wakeup_code, %eax + mov $0xc0000080, %ecx + wrmsr +4: + # make sure %cr4 is set correctly (features, etc) + movl real_save_cr4 - wakeup_code, %eax + movl %eax, %cr4 + movw $0xb800, %ax + movw %ax,%fs + movw $0x0e00 + 'i', %fs:(0x12) + + # need a gdt -- use lgdtl to force 32-bit operands, in case + # the GDT is located past 16 megabytes. + lgdtl real_save_gdt - wakeup_code + + movl real_save_cr0 - wakeup_code, %eax + movl %eax, %cr0 + jmp 1f +1: + movw $0x0e00 + 'n', %fs:(0x14) + + movl real_magic - wakeup_code, %eax + cmpl $0x12345678, %eax + jne bogus_real_magic + + testl $8, realmode_flags - wakeup_code + jz 1f + BEEP +1: + ljmpl $__KERNEL_CS, $wakeup_pmode_return + +real_save_gdt: .word 0 + .long 0 +real_save_cr0: .long 0 +real_save_cr3: .long 0 +real_save_cr4: .long 0 +real_magic: .long 0 +video_mode: .long 0 +realmode_flags: .long 0 +beep_flags: .long 0 +real_efer_save_restore: .long 0 +real_save_efer_edx: .long 0 +real_save_efer_eax: .long 0 + +bogus_real_magic: + movw $0x0e00 + 'B', %fs:(0x12) + jmp bogus_real_magic + +/* This code uses an extended set of video mode numbers. These include: + * Aliases for standard modes + * NORMAL_VGA (-1) + * EXTENDED_VGA (-2) + * ASK_VGA (-3) + * Video modes numbered by menu position -- NOT RECOMMENDED because of lack + * of compatibility when extending the table. These are between 0x00 and 0xff. + */ +#define VIDEO_FIRST_MENU 0x0000 + +/* Standard BIOS video modes (BIOS number + 0x0100) */ +#define VIDEO_FIRST_BIOS 0x0100 + +/* VESA BIOS video modes (VESA number + 0x0200) */ +#define VIDEO_FIRST_VESA 0x0200 + +/* Video7 special modes (BIOS number + 0x0900) */ +#define VIDEO_FIRST_V7 0x0900 + +# Setting of user mode (AX=mode ID) => CF=success + +# For now, we only handle VESA modes (0x0200..0x03ff). To handle other +# modes, we should probably compile in the video code from the boot +# directory. +mode_set: + movw %ax, %bx + subb $VIDEO_FIRST_VESA>>8, %bh + cmpb $2, %bh + jb check_vesa + +setbad: + clc + ret + +check_vesa: + orw $0x4000, %bx # Use linear frame buffer + movw $0x4f02, %ax # VESA BIOS mode set call + int $0x10 + cmpw $0x004f, %ax # AL=4f if implemented + jnz setbad # AH=0 if OK + + stc + ret + + .code32 + ALIGN + +.org 0x800 +wakeup_stack_begin: # Stack grows down + +.org 0xff0 # Just below end of page +wakeup_stack: +ENTRY(wakeup_end) + +.org 0x1000 + +wakeup_pmode_return: + movw $__KERNEL_DS, %ax + movw %ax, %ss + movw %ax, %ds + movw %ax, %es + movw %ax, %fs + movw %ax, %gs + movw $0x0e00 + 'u', 0xb8016 + + # reload the gdt, as we need the full 32 bit address + lgdt saved_gdt + lidt saved_idt + lldt saved_ldt + ljmp $(__KERNEL_CS),$1f +1: + movl %cr3, %eax + movl %eax, %cr3 + wbinvd + + # and restore the stack ... but you need gdt for this to work + movl saved_context_esp, %esp + + movl %cs:saved_magic, %eax + cmpl $0x12345678, %eax + jne bogus_magic + + # jump to place where we left off + movl saved_eip,%eax + jmp *%eax + +bogus_magic: + movw $0x0e00 + 'B', 0xb8018 + jmp bogus_magic + + +## +# acpi_copy_wakeup_routine +# +# Copy the above routine to low memory. +# +# Parameters: +# %eax: place to copy wakeup routine to +# +# Returned address is location of code in low memory (past data and stack) +# +ENTRY(acpi_copy_wakeup_routine) + + pushl %ebx + sgdt saved_gdt + sidt saved_idt + sldt saved_ldt + str saved_tss + + movl nx_enabled, %edx + movl %edx, real_efer_save_restore - wakeup_start (%eax) + testl $1, real_efer_save_restore - wakeup_start (%eax) + jz 2f + # save efer setting + pushl %eax + movl %eax, %ebx + mov $0xc0000080, %ecx + rdmsr + movl %edx, real_save_efer_edx - wakeup_start (%ebx) + movl %eax, real_save_efer_eax - wakeup_start (%ebx) + popl %eax +2: + + movl %cr3, %edx + movl %edx, real_save_cr3 - wakeup_start (%eax) + movl %cr4, %edx + movl %edx, real_save_cr4 - wakeup_start (%eax) + movl %cr0, %edx + movl %edx, real_save_cr0 - wakeup_start (%eax) + sgdt real_save_gdt - wakeup_start (%eax) + + movl saved_videomode, %edx + movl %edx, video_mode - wakeup_start (%eax) + movl acpi_realmode_flags, %edx + movl %edx, realmode_flags - wakeup_start (%eax) + movl $0x12345678, real_magic - wakeup_start (%eax) + movl $0x12345678, saved_magic + popl %ebx + ret + +save_registers: + leal 4(%esp), %eax + movl %eax, saved_context_esp + movl %ebx, saved_context_ebx + movl %ebp, saved_context_ebp + movl %esi, saved_context_esi + movl %edi, saved_context_edi + pushfl ; popl saved_context_eflags + + movl $ret_point, saved_eip + ret + + +restore_registers: + movl saved_context_ebp, %ebp + movl saved_context_ebx, %ebx + movl saved_context_esi, %esi + movl saved_context_edi, %edi + pushl saved_context_eflags ; popfl + ret + +ENTRY(do_suspend_lowlevel) + call save_processor_state + call save_registers + pushl $3 + call acpi_enter_sleep_state + addl $4, %esp + +# In case of S3 failure, we'll emerge here. Jump +# to ret_point to recover + jmp ret_point + .p2align 4,,7 +ret_point: + call restore_registers + call restore_processor_state + ret + +.data +ALIGN +ENTRY(saved_magic) .long 0 +ENTRY(saved_eip) .long 0 + +# saved registers +saved_gdt: .long 0,0 +saved_idt: .long 0,0 +saved_ldt: .long 0 +saved_tss: .long 0 + diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S new file mode 100644 index 000000000000..8b4357e1efe0 --- /dev/null +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -0,0 +1,456 @@ +.text +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/msr.h> + +# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2 +# +# wakeup_code runs in real mode, and at unknown address (determined at run-time). +# Therefore it must only use relative jumps/calls. +# +# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled +# +# If physical address of wakeup_code is 0x12345, BIOS should call us with +# cs = 0x1234, eip = 0x05 +# + +#define BEEP \ + inb $97, %al; \ + outb %al, $0x80; \ + movb $3, %al; \ + outb %al, $97; \ + outb %al, $0x80; \ + movb $-74, %al; \ + outb %al, $67; \ + outb %al, $0x80; \ + movb $-119, %al; \ + outb %al, $66; \ + outb %al, $0x80; \ + movb $15, %al; \ + outb %al, $66; + + +ALIGN + .align 16 +ENTRY(wakeup_start) +wakeup_code: + wakeup_code_start = . + .code16 + +# Running in *copy* of this code, somewhere in low 1MB. + + movb $0xa1, %al ; outb %al, $0x80 + cli + cld + # setup data segment + movw %cs, %ax + movw %ax, %ds # Make ds:0 point to wakeup_start + movw %ax, %ss + + # Data segment must be set up before we can see whether to beep. + testl $4, realmode_flags - wakeup_code + jz 1f + BEEP +1: + + # Private stack is needed for ASUS board + mov $(wakeup_stack - wakeup_code), %sp + + pushl $0 # Kill any dangerous flags + popfl + + movl real_magic - wakeup_code, %eax + cmpl $0x12345678, %eax + jne bogus_real_magic + + call verify_cpu # Verify the cpu supports long + # mode + testl %eax, %eax + jnz no_longmode + + testl $1, realmode_flags - wakeup_code + jz 1f + lcall $0xc000,$3 + movw %cs, %ax + movw %ax, %ds # Bios might have played with that + movw %ax, %ss +1: + + testl $2, realmode_flags - wakeup_code + jz 1f + mov video_mode - wakeup_code, %ax + call mode_set +1: + + movw $0xb800, %ax + movw %ax,%fs + movw $0x0e00 + 'L', %fs:(0x10) + + movb $0xa2, %al ; outb %al, $0x80 + + mov %ds, %ax # Find 32bit wakeup_code addr + movzx %ax, %esi # (Convert %ds:gdt to a liner ptr) + shll $4, %esi + # Fix up the vectors + addl %esi, wakeup_32_vector - wakeup_code + addl %esi, wakeup_long64_vector - wakeup_code + addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer + + lidtl %ds:idt_48a - wakeup_code + lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is + # appropriate + + movl $1, %eax # protected mode (PE) bit + lmsw %ax # This is it! + jmp 1f +1: + + ljmpl *(wakeup_32_vector - wakeup_code) + + .balign 4 +wakeup_32_vector: + .long wakeup_32 - wakeup_code + .word __KERNEL32_CS, 0 + + .code32 +wakeup_32: +# Running in this code, but at low address; paging is not yet turned on. + movb $0xa5, %al ; outb %al, $0x80 + + movl $__KERNEL_DS, %eax + movl %eax, %ds + + movw $0x0e00 + 'i', %ds:(0xb8012) + movb $0xa8, %al ; outb %al, $0x80; + + /* + * Prepare for entering 64bits mode + */ + + /* Enable PAE */ + xorl %eax, %eax + btsl $5, %eax + movl %eax, %cr4 + + /* Setup early boot stage 4 level pagetables */ + leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax + movl %eax, %cr3 + + /* Check if nx is implemented */ + movl $0x80000001, %eax + cpuid + movl %edx,%edi + + /* Enable Long Mode */ + xorl %eax, %eax + btsl $_EFER_LME, %eax + + /* No Execute supported? */ + btl $20,%edi + jnc 1f + btsl $_EFER_NX, %eax + + /* Make changes effective */ +1: movl $MSR_EFER, %ecx + xorl %edx, %edx + wrmsr + + xorl %eax, %eax + btsl $31, %eax /* Enable paging and in turn activate Long Mode */ + btsl $0, %eax /* Enable protected mode */ + + /* Make changes effective */ + movl %eax, %cr0 + + /* At this point: + CR4.PAE must be 1 + CS.L must be 0 + CR3 must point to PML4 + Next instruction must be a branch + This must be on identity-mapped page + */ + /* + * At this point we're in long mode but in 32bit compatibility mode + * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn + * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + */ + + /* Finally jump in 64bit mode */ + ljmp *(wakeup_long64_vector - wakeup_code)(%esi) + + .balign 4 +wakeup_long64_vector: + .long wakeup_long64 - wakeup_code + .word __KERNEL_CS, 0 + +.code64 + + /* Hooray, we are in Long 64-bit mode (but still running in + * low memory) + */ +wakeup_long64: + /* + * We must switch to a new descriptor in kernel space for the GDT + * because soon the kernel won't have access anymore to the userspace + * addresses where we're currently running on. We have to do that here + * because in 32bit we couldn't load a 64bit linear address. + */ + lgdt cpu_gdt_descr + + movw $0x0e00 + 'n', %ds:(0xb8014) + movb $0xa9, %al ; outb %al, $0x80 + + movq saved_magic, %rax + movq $0x123456789abcdef0, %rdx + cmpq %rdx, %rax + jne bogus_64_magic + + movw $0x0e00 + 'u', %ds:(0xb8016) + + nop + nop + movw $__KERNEL_DS, %ax + movw %ax, %ss + movw %ax, %ds + movw %ax, %es + movw %ax, %fs + movw %ax, %gs + movq saved_rsp, %rsp + + movw $0x0e00 + 'x', %ds:(0xb8018) + movq saved_rbx, %rbx + movq saved_rdi, %rdi + movq saved_rsi, %rsi + movq saved_rbp, %rbp + + movw $0x0e00 + '!', %ds:(0xb801a) + movq saved_rip, %rax + jmp *%rax + +.code32 + + .align 64 +gdta: + /* Its good to keep gdt in sync with one in trampoline.S */ + .word 0, 0, 0, 0 # dummy + /* ??? Why I need the accessed bit set in order for this to work? */ + .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DS + +idt_48a: + .word 0 # idt limit = 0 + .word 0, 0 # idt base = 0L + +gdt_48a: + .word 0x800 # gdt limit=2048, + # 256 GDT entries + .long gdta - wakeup_code # gdt base (relocated in later) + +real_magic: .quad 0 +video_mode: .quad 0 +realmode_flags: .quad 0 + +.code16 +bogus_real_magic: + movb $0xba,%al ; outb %al,$0x80 + jmp bogus_real_magic + +.code64 +bogus_64_magic: + movb $0xb3,%al ; outb %al,$0x80 + jmp bogus_64_magic + +.code16 +no_longmode: + movb $0xbc,%al ; outb %al,$0x80 + jmp no_longmode + +#include "../verify_cpu_64.S" + +/* This code uses an extended set of video mode numbers. These include: + * Aliases for standard modes + * NORMAL_VGA (-1) + * EXTENDED_VGA (-2) + * ASK_VGA (-3) + * Video modes numbered by menu position -- NOT RECOMMENDED because of lack + * of compatibility when extending the table. These are between 0x00 and 0xff. + */ +#define VIDEO_FIRST_MENU 0x0000 + +/* Standard BIOS video modes (BIOS number + 0x0100) */ +#define VIDEO_FIRST_BIOS 0x0100 + +/* VESA BIOS video modes (VESA number + 0x0200) */ +#define VIDEO_FIRST_VESA 0x0200 + +/* Video7 special modes (BIOS number + 0x0900) */ +#define VIDEO_FIRST_V7 0x0900 + +# Setting of user mode (AX=mode ID) => CF=success + +# For now, we only handle VESA modes (0x0200..0x03ff). To handle other +# modes, we should probably compile in the video code from the boot +# directory. +.code16 +mode_set: + movw %ax, %bx + subb $VIDEO_FIRST_VESA>>8, %bh + cmpb $2, %bh + jb check_vesa + +setbad: + clc + ret + +check_vesa: + orw $0x4000, %bx # Use linear frame buffer + movw $0x4f02, %ax # VESA BIOS mode set call + int $0x10 + cmpw $0x004f, %ax # AL=4f if implemented + jnz setbad # AH=0 if OK + + stc + ret + +wakeup_stack_begin: # Stack grows down + +.org 0xff0 +wakeup_stack: # Just below end of page + +.org 0x1000 +ENTRY(wakeup_level4_pgt) + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 510,8,0 + /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ + .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE + +ENTRY(wakeup_end) + +## +# acpi_copy_wakeup_routine +# +# Copy the above routine to low memory. +# +# Parameters: +# %rdi: place to copy wakeup routine to +# +# Returned address is location of code in low memory (past data and stack) +# + .code64 +ENTRY(acpi_copy_wakeup_routine) + pushq %rax + pushq %rdx + + movl saved_video_mode, %edx + movl %edx, video_mode - wakeup_start (,%rdi) + movl acpi_realmode_flags, %edx + movl %edx, realmode_flags - wakeup_start (,%rdi) + movq $0x12345678, real_magic - wakeup_start (,%rdi) + movq $0x123456789abcdef0, %rdx + movq %rdx, saved_magic + + movq saved_magic, %rax + movq $0x123456789abcdef0, %rdx + cmpq %rdx, %rax + jne bogus_64_magic + + # restore the regs we used + popq %rdx + popq %rax +ENTRY(do_suspend_lowlevel_s4bios) + ret + + .align 2 + .p2align 4,,15 +.globl do_suspend_lowlevel + .type do_suspend_lowlevel,@function +do_suspend_lowlevel: +.LFB5: + subq $8, %rsp + xorl %eax, %eax + call save_processor_state + + movq %rsp, saved_context_esp(%rip) + movq %rax, saved_context_eax(%rip) + movq %rbx, saved_context_ebx(%rip) + movq %rcx, saved_context_ecx(%rip) + movq %rdx, saved_context_edx(%rip) + movq %rbp, saved_context_ebp(%rip) + movq %rsi, saved_context_esi(%rip) + movq %rdi, saved_context_edi(%rip) + movq %r8, saved_context_r08(%rip) + movq %r9, saved_context_r09(%rip) + movq %r10, saved_context_r10(%rip) + movq %r11, saved_context_r11(%rip) + movq %r12, saved_context_r12(%rip) + movq %r13, saved_context_r13(%rip) + movq %r14, saved_context_r14(%rip) + movq %r15, saved_context_r15(%rip) + pushfq ; popq saved_context_eflags(%rip) + + movq $.L97, saved_rip(%rip) + + movq %rsp,saved_rsp + movq %rbp,saved_rbp + movq %rbx,saved_rbx + movq %rdi,saved_rdi + movq %rsi,saved_rsi + + addq $8, %rsp + movl $3, %edi + xorl %eax, %eax + jmp acpi_enter_sleep_state +.L97: + .p2align 4,,7 +.L99: + .align 4 + movl $24, %eax + movw %ax, %ds + movq saved_context+58(%rip), %rax + movq %rax, %cr4 + movq saved_context+50(%rip), %rax + movq %rax, %cr3 + movq saved_context+42(%rip), %rax + movq %rax, %cr2 + movq saved_context+34(%rip), %rax + movq %rax, %cr0 + pushq saved_context_eflags(%rip) ; popfq + movq saved_context_esp(%rip), %rsp + movq saved_context_ebp(%rip), %rbp + movq saved_context_eax(%rip), %rax + movq saved_context_ebx(%rip), %rbx + movq saved_context_ecx(%rip), %rcx + movq saved_context_edx(%rip), %rdx + movq saved_context_esi(%rip), %rsi + movq saved_context_edi(%rip), %rdi + movq saved_context_r08(%rip), %r8 + movq saved_context_r09(%rip), %r9 + movq saved_context_r10(%rip), %r10 + movq saved_context_r11(%rip), %r11 + movq saved_context_r12(%rip), %r12 + movq saved_context_r13(%rip), %r13 + movq saved_context_r14(%rip), %r14 + movq saved_context_r15(%rip), %r15 + + xorl %eax, %eax + addq $8, %rsp + jmp restore_processor_state +.LFE5: +.Lfe5: + .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel + +.data +ALIGN +ENTRY(saved_rbp) .quad 0 +ENTRY(saved_rsi) .quad 0 +ENTRY(saved_rdi) .quad 0 +ENTRY(saved_rbx) .quad 0 + +ENTRY(saved_rip) .quad 0 +ENTRY(saved_rsp) .quad 0 + +ENTRY(saved_magic) .quad 0 diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c new file mode 100644 index 000000000000..bd72d94e713e --- /dev/null +++ b/arch/x86/kernel/alternative.c @@ -0,0 +1,450 @@ +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/kprobes.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <asm/alternative.h> +#include <asm/sections.h> +#include <asm/pgtable.h> +#include <asm/mce.h> +#include <asm/nmi.h> + +#define MAX_PATCH_LEN (255-1) + +#ifdef CONFIG_HOTPLUG_CPU +static int smp_alt_once; + +static int __init bootonly(char *str) +{ + smp_alt_once = 1; + return 1; +} +__setup("smp-alt-boot", bootonly); +#else +#define smp_alt_once 1 +#endif + +static int debug_alternative; + +static int __init debug_alt(char *str) +{ + debug_alternative = 1; + return 1; +} +__setup("debug-alternative", debug_alt); + +static int noreplace_smp; + +static int __init setup_noreplace_smp(char *str) +{ + noreplace_smp = 1; + return 1; +} +__setup("noreplace-smp", setup_noreplace_smp); + +#ifdef CONFIG_PARAVIRT +static int noreplace_paravirt = 0; + +static int __init setup_noreplace_paravirt(char *str) +{ + noreplace_paravirt = 1; + return 1; +} +__setup("noreplace-paravirt", setup_noreplace_paravirt); +#endif + +#define DPRINTK(fmt, args...) if (debug_alternative) \ + printk(KERN_DEBUG fmt, args) + +#ifdef GENERIC_NOP1 +/* Use inline assembly to define this because the nops are defined + as inline assembly strings in the include files and we cannot + get them easily into strings. */ +asm("\t.data\nintelnops: " + GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6 + GENERIC_NOP7 GENERIC_NOP8); +extern unsigned char intelnops[]; +static unsigned char *intel_nops[ASM_NOP_MAX+1] = { + NULL, + intelnops, + intelnops + 1, + intelnops + 1 + 2, + intelnops + 1 + 2 + 3, + intelnops + 1 + 2 + 3 + 4, + intelnops + 1 + 2 + 3 + 4 + 5, + intelnops + 1 + 2 + 3 + 4 + 5 + 6, + intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7, +}; +#endif + +#ifdef K8_NOP1 +asm("\t.data\nk8nops: " + K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6 + K8_NOP7 K8_NOP8); +extern unsigned char k8nops[]; +static unsigned char *k8_nops[ASM_NOP_MAX+1] = { + NULL, + k8nops, + k8nops + 1, + k8nops + 1 + 2, + k8nops + 1 + 2 + 3, + k8nops + 1 + 2 + 3 + 4, + k8nops + 1 + 2 + 3 + 4 + 5, + k8nops + 1 + 2 + 3 + 4 + 5 + 6, + k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, +}; +#endif + +#ifdef K7_NOP1 +asm("\t.data\nk7nops: " + K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6 + K7_NOP7 K7_NOP8); +extern unsigned char k7nops[]; +static unsigned char *k7_nops[ASM_NOP_MAX+1] = { + NULL, + k7nops, + k7nops + 1, + k7nops + 1 + 2, + k7nops + 1 + 2 + 3, + k7nops + 1 + 2 + 3 + 4, + k7nops + 1 + 2 + 3 + 4 + 5, + k7nops + 1 + 2 + 3 + 4 + 5 + 6, + k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, +}; +#endif + +#ifdef CONFIG_X86_64 + +extern char __vsyscall_0; +static inline unsigned char** find_nop_table(void) +{ + return k8_nops; +} + +#else /* CONFIG_X86_64 */ + +static struct nop { + int cpuid; + unsigned char **noptable; +} noptypes[] = { + { X86_FEATURE_K8, k8_nops }, + { X86_FEATURE_K7, k7_nops }, + { -1, NULL } +}; + +static unsigned char** find_nop_table(void) +{ + unsigned char **noptable = intel_nops; + int i; + + for (i = 0; noptypes[i].cpuid >= 0; i++) { + if (boot_cpu_has(noptypes[i].cpuid)) { + noptable = noptypes[i].noptable; + break; + } + } + return noptable; +} + +#endif /* CONFIG_X86_64 */ + +/* Use this to add nops to a buffer, then text_poke the whole buffer. */ +static void add_nops(void *insns, unsigned int len) +{ + unsigned char **noptable = find_nop_table(); + + while (len > 0) { + unsigned int noplen = len; + if (noplen > ASM_NOP_MAX) + noplen = ASM_NOP_MAX; + memcpy(insns, noptable[noplen], noplen); + insns += noplen; + len -= noplen; + } +} + +extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; +extern u8 *__smp_locks[], *__smp_locks_end[]; + +/* Replace instructions with better alternatives for this CPU type. + This runs before SMP is initialized to avoid SMP problems with + self modifying code. This implies that assymetric systems where + APs have less capabilities than the boot processor are not handled. + Tough. Make sure you disable such features by hand. */ + +void apply_alternatives(struct alt_instr *start, struct alt_instr *end) +{ + struct alt_instr *a; + char insnbuf[MAX_PATCH_LEN]; + + DPRINTK("%s: alt table %p -> %p\n", __FUNCTION__, start, end); + for (a = start; a < end; a++) { + u8 *instr = a->instr; + BUG_ON(a->replacementlen > a->instrlen); + BUG_ON(a->instrlen > sizeof(insnbuf)); + if (!boot_cpu_has(a->cpuid)) + continue; +#ifdef CONFIG_X86_64 + /* vsyscall code is not mapped yet. resolve it manually. */ + if (instr >= (u8 *)VSYSCALL_START && instr < (u8*)VSYSCALL_END) { + instr = __va(instr - (u8*)VSYSCALL_START + (u8*)__pa_symbol(&__vsyscall_0)); + DPRINTK("%s: vsyscall fixup: %p => %p\n", + __FUNCTION__, a->instr, instr); + } +#endif + memcpy(insnbuf, a->replacement, a->replacementlen); + add_nops(insnbuf + a->replacementlen, + a->instrlen - a->replacementlen); + text_poke(instr, insnbuf, a->instrlen); + } +} + +#ifdef CONFIG_SMP + +static void alternatives_smp_lock(u8 **start, u8 **end, u8 *text, u8 *text_end) +{ + u8 **ptr; + + for (ptr = start; ptr < end; ptr++) { + if (*ptr < text) + continue; + if (*ptr > text_end) + continue; + text_poke(*ptr, ((unsigned char []){0xf0}), 1); /* add lock prefix */ + }; +} + +static void alternatives_smp_unlock(u8 **start, u8 **end, u8 *text, u8 *text_end) +{ + u8 **ptr; + char insn[1]; + + if (noreplace_smp) + return; + + add_nops(insn, 1); + for (ptr = start; ptr < end; ptr++) { + if (*ptr < text) + continue; + if (*ptr > text_end) + continue; + text_poke(*ptr, insn, 1); + }; +} + +struct smp_alt_module { + /* what is this ??? */ + struct module *mod; + char *name; + + /* ptrs to lock prefixes */ + u8 **locks; + u8 **locks_end; + + /* .text segment, needed to avoid patching init code ;) */ + u8 *text; + u8 *text_end; + + struct list_head next; +}; +static LIST_HEAD(smp_alt_modules); +static DEFINE_SPINLOCK(smp_alt); + +void alternatives_smp_module_add(struct module *mod, char *name, + void *locks, void *locks_end, + void *text, void *text_end) +{ + struct smp_alt_module *smp; + unsigned long flags; + + if (noreplace_smp) + return; + + if (smp_alt_once) { + if (boot_cpu_has(X86_FEATURE_UP)) + alternatives_smp_unlock(locks, locks_end, + text, text_end); + return; + } + + smp = kzalloc(sizeof(*smp), GFP_KERNEL); + if (NULL == smp) + return; /* we'll run the (safe but slow) SMP code then ... */ + + smp->mod = mod; + smp->name = name; + smp->locks = locks; + smp->locks_end = locks_end; + smp->text = text; + smp->text_end = text_end; + DPRINTK("%s: locks %p -> %p, text %p -> %p, name %s\n", + __FUNCTION__, smp->locks, smp->locks_end, + smp->text, smp->text_end, smp->name); + + spin_lock_irqsave(&smp_alt, flags); + list_add_tail(&smp->next, &smp_alt_modules); + if (boot_cpu_has(X86_FEATURE_UP)) + alternatives_smp_unlock(smp->locks, smp->locks_end, + smp->text, smp->text_end); + spin_unlock_irqrestore(&smp_alt, flags); +} + +void alternatives_smp_module_del(struct module *mod) +{ + struct smp_alt_module *item; + unsigned long flags; + + if (smp_alt_once || noreplace_smp) + return; + + spin_lock_irqsave(&smp_alt, flags); + list_for_each_entry(item, &smp_alt_modules, next) { + if (mod != item->mod) + continue; + list_del(&item->next); + spin_unlock_irqrestore(&smp_alt, flags); + DPRINTK("%s: %s\n", __FUNCTION__, item->name); + kfree(item); + return; + } + spin_unlock_irqrestore(&smp_alt, flags); +} + +void alternatives_smp_switch(int smp) +{ + struct smp_alt_module *mod; + unsigned long flags; + +#ifdef CONFIG_LOCKDEP + /* + * A not yet fixed binutils section handling bug prevents + * alternatives-replacement from working reliably, so turn + * it off: + */ + printk("lockdep: not fixing up alternatives.\n"); + return; +#endif + + if (noreplace_smp || smp_alt_once) + return; + BUG_ON(!smp && (num_online_cpus() > 1)); + + spin_lock_irqsave(&smp_alt, flags); + if (smp) { + printk(KERN_INFO "SMP alternatives: switching to SMP code\n"); + clear_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability); + clear_bit(X86_FEATURE_UP, cpu_data[0].x86_capability); + list_for_each_entry(mod, &smp_alt_modules, next) + alternatives_smp_lock(mod->locks, mod->locks_end, + mod->text, mod->text_end); + } else { + printk(KERN_INFO "SMP alternatives: switching to UP code\n"); + set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability); + set_bit(X86_FEATURE_UP, cpu_data[0].x86_capability); + list_for_each_entry(mod, &smp_alt_modules, next) + alternatives_smp_unlock(mod->locks, mod->locks_end, + mod->text, mod->text_end); + } + spin_unlock_irqrestore(&smp_alt, flags); +} + +#endif + +#ifdef CONFIG_PARAVIRT +void apply_paravirt(struct paravirt_patch_site *start, + struct paravirt_patch_site *end) +{ + struct paravirt_patch_site *p; + char insnbuf[MAX_PATCH_LEN]; + + if (noreplace_paravirt) + return; + + for (p = start; p < end; p++) { + unsigned int used; + + BUG_ON(p->len > MAX_PATCH_LEN); + /* prep the buffer with the original instructions */ + memcpy(insnbuf, p->instr, p->len); + used = paravirt_ops.patch(p->instrtype, p->clobbers, insnbuf, + (unsigned long)p->instr, p->len); + + BUG_ON(used > p->len); + + /* Pad the rest with nops */ + add_nops(insnbuf + used, p->len - used); + text_poke(p->instr, insnbuf, p->len); + } +} +extern struct paravirt_patch_site __start_parainstructions[], + __stop_parainstructions[]; +#endif /* CONFIG_PARAVIRT */ + +void __init alternative_instructions(void) +{ + unsigned long flags; + + /* The patching is not fully atomic, so try to avoid local interruptions + that might execute the to be patched code. + Other CPUs are not running. */ + stop_nmi(); +#ifdef CONFIG_X86_MCE + stop_mce(); +#endif + + local_irq_save(flags); + apply_alternatives(__alt_instructions, __alt_instructions_end); + + /* switch to patch-once-at-boottime-only mode and free the + * tables in case we know the number of CPUs will never ever + * change */ +#ifdef CONFIG_HOTPLUG_CPU + if (num_possible_cpus() < 2) + smp_alt_once = 1; +#endif + +#ifdef CONFIG_SMP + if (smp_alt_once) { + if (1 == num_possible_cpus()) { + printk(KERN_INFO "SMP alternatives: switching to UP code\n"); + set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability); + set_bit(X86_FEATURE_UP, cpu_data[0].x86_capability); + alternatives_smp_unlock(__smp_locks, __smp_locks_end, + _text, _etext); + } + free_init_pages("SMP alternatives", + (unsigned long)__smp_locks, + (unsigned long)__smp_locks_end); + } else { + alternatives_smp_module_add(NULL, "core kernel", + __smp_locks, __smp_locks_end, + _text, _etext); + alternatives_smp_switch(0); + } +#endif + apply_paravirt(__parainstructions, __parainstructions_end); + local_irq_restore(flags); + + restart_nmi(); +#ifdef CONFIG_X86_MCE + restart_mce(); +#endif +} + +/* + * Warning: + * When you use this code to patch more than one byte of an instruction + * you need to make sure that other CPUs cannot execute this code in parallel. + * Also no thread must be currently preempted in the middle of these instructions. + * And on the local CPU you need to be protected again NMI or MCE handlers + * seeing an inconsistent instruction while you patch. + */ +void __kprobes text_poke(void *addr, unsigned char *opcode, int len) +{ + memcpy(addr, opcode, len); + sync_core(); + /* Could also do a CLFLUSH here to speed up CPU recovery; but + that causes hangs on some VIA CPUs. */ +} diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c new file mode 100644 index 000000000000..8f681cae7bf7 --- /dev/null +++ b/arch/x86/kernel/aperture_64.c @@ -0,0 +1,298 @@ +/* + * Firmware replacement code. + * + * Work around broken BIOSes that don't set an aperture or only set the + * aperture in the AGP bridge. + * If all fails map the aperture over some low memory. This is cheaper than + * doing bounce buffering. The memory is lost. This is done at early boot + * because only the bootmem allocator can allocate 32+MB. + * + * Copyright 2002 Andi Kleen, SuSE Labs. + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/mmzone.h> +#include <linux/pci_ids.h> +#include <linux/pci.h> +#include <linux/bitops.h> +#include <linux/ioport.h> +#include <asm/e820.h> +#include <asm/io.h> +#include <asm/iommu.h> +#include <asm/pci-direct.h> +#include <asm/dma.h> +#include <asm/k8.h> + +int iommu_aperture; +int iommu_aperture_disabled __initdata = 0; +int iommu_aperture_allowed __initdata = 0; + +int fallback_aper_order __initdata = 1; /* 64MB */ +int fallback_aper_force __initdata = 0; + +int fix_aperture __initdata = 1; + +static struct resource gart_resource = { + .name = "GART", + .flags = IORESOURCE_MEM, +}; + +static void __init insert_aperture_resource(u32 aper_base, u32 aper_size) +{ + gart_resource.start = aper_base; + gart_resource.end = aper_base + aper_size - 1; + insert_resource(&iomem_resource, &gart_resource); +} + +/* This code runs before the PCI subsystem is initialized, so just + access the northbridge directly. */ + +static u32 __init allocate_aperture(void) +{ + u32 aper_size; + void *p; + + if (fallback_aper_order > 7) + fallback_aper_order = 7; + aper_size = (32 * 1024 * 1024) << fallback_aper_order; + + /* + * Aperture has to be naturally aligned. This means an 2GB aperture won't + * have much chance of finding a place in the lower 4GB of memory. + * Unfortunately we cannot move it up because that would make the + * IOMMU useless. + */ + p = __alloc_bootmem_nopanic(aper_size, aper_size, 0); + if (!p || __pa(p)+aper_size > 0xffffffff) { + printk("Cannot allocate aperture memory hole (%p,%uK)\n", + p, aper_size>>10); + if (p) + free_bootmem(__pa(p), aper_size); + return 0; + } + printk("Mapping aperture over %d KB of RAM @ %lx\n", + aper_size >> 10, __pa(p)); + insert_aperture_resource((u32)__pa(p), aper_size); + return (u32)__pa(p); +} + +static int __init aperture_valid(u64 aper_base, u32 aper_size) +{ + if (!aper_base) + return 0; + if (aper_size < 64*1024*1024) { + printk("Aperture too small (%d MB)\n", aper_size>>20); + return 0; + } + if (aper_base + aper_size > 0x100000000UL) { + printk("Aperture beyond 4GB. Ignoring.\n"); + return 0; + } + if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { + printk("Aperture pointing to e820 RAM. Ignoring.\n"); + return 0; + } + return 1; +} + +/* Find a PCI capability */ +static __u32 __init find_cap(int num, int slot, int func, int cap) +{ + u8 pos; + int bytes; + if (!(read_pci_config_16(num,slot,func,PCI_STATUS) & PCI_STATUS_CAP_LIST)) + return 0; + pos = read_pci_config_byte(num,slot,func,PCI_CAPABILITY_LIST); + for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { + u8 id; + pos &= ~3; + id = read_pci_config_byte(num,slot,func,pos+PCI_CAP_LIST_ID); + if (id == 0xff) + break; + if (id == cap) + return pos; + pos = read_pci_config_byte(num,slot,func,pos+PCI_CAP_LIST_NEXT); + } + return 0; +} + +/* Read a standard AGPv3 bridge header */ +static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) +{ + u32 apsize; + u32 apsizereg; + int nbits; + u32 aper_low, aper_hi; + u64 aper; + + printk("AGP bridge at %02x:%02x:%02x\n", num, slot, func); + apsizereg = read_pci_config_16(num,slot,func, cap + 0x14); + if (apsizereg == 0xffffffff) { + printk("APSIZE in AGP bridge unreadable\n"); + return 0; + } + + apsize = apsizereg & 0xfff; + /* Some BIOS use weird encodings not in the AGPv3 table. */ + if (apsize & 0xff) + apsize |= 0xf00; + nbits = hweight16(apsize); + *order = 7 - nbits; + if ((int)*order < 0) /* < 32MB */ + *order = 0; + + aper_low = read_pci_config(num,slot,func, 0x10); + aper_hi = read_pci_config(num,slot,func,0x14); + aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + + printk("Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", + aper, 32 << *order, apsizereg); + + if (!aperture_valid(aper, (32*1024*1024) << *order)) + return 0; + return (u32)aper; +} + +/* Look for an AGP bridge. Windows only expects the aperture in the + AGP bridge and some BIOS forget to initialize the Northbridge too. + Work around this here. + + Do an PCI bus scan by hand because we're running before the PCI + subsystem. + + All K8 AGP bridges are AGPv3 compliant, so we can do this scan + generically. It's probably overkill to always scan all slots because + the AGP bridges should be always an own bus on the HT hierarchy, + but do it here for future safety. */ +static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) +{ + int num, slot, func; + + /* Poor man's PCI discovery */ + for (num = 0; num < 256; num++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + u32 class, cap; + u8 type; + class = read_pci_config(num,slot,func, + PCI_CLASS_REVISION); + if (class == 0xffffffff) + break; + + switch (class >> 16) { + case PCI_CLASS_BRIDGE_HOST: + case PCI_CLASS_BRIDGE_OTHER: /* needed? */ + /* AGP bridge? */ + cap = find_cap(num,slot,func,PCI_CAP_ID_AGP); + if (!cap) + break; + *valid_agp = 1; + return read_agp(num,slot,func,cap,order); + } + + /* No multi-function device? */ + type = read_pci_config_byte(num,slot,func, + PCI_HEADER_TYPE); + if (!(type & 0x80)) + break; + } + } + } + printk("No AGP bridge found\n"); + return 0; +} + +void __init iommu_hole_init(void) +{ + int fix, num; + u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; + u64 aper_base, last_aper_base = 0; + int valid_agp = 0; + + if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) + return; + + printk(KERN_INFO "Checking aperture...\n"); + + fix = 0; + for (num = 24; num < 32; num++) { + if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) + continue; + + iommu_detected = 1; + iommu_aperture = 1; + + aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; + aper_base <<= 25; + + printk("CPU %d: aperture @ %Lx size %u MB\n", num-24, + aper_base, aper_size>>20); + + if (!aperture_valid(aper_base, aper_size)) { + fix = 1; + break; + } + + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base)) { + fix = 1; + break; + } + last_aper_order = aper_order; + last_aper_base = aper_base; + } + + if (!fix && !fallback_aper_force) { + if (last_aper_base) { + unsigned long n = (32 * 1024 * 1024) << last_aper_order; + insert_aperture_resource((u32)last_aper_base, n); + } + return; + } + + if (!fallback_aper_force) + aper_alloc = search_agp_bridge(&aper_order, &valid_agp); + + if (aper_alloc) { + /* Got the aperture from the AGP bridge */ + } else if (swiotlb && !valid_agp) { + /* Do nothing */ + } else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) || + force_iommu || + valid_agp || + fallback_aper_force) { + printk("Your BIOS doesn't leave a aperture memory hole\n"); + printk("Please enable the IOMMU option in the BIOS setup\n"); + printk("This costs you %d MB of RAM\n", + 32 << fallback_aper_order); + + aper_order = fallback_aper_order; + aper_alloc = allocate_aperture(); + if (!aper_alloc) { + /* Could disable AGP and IOMMU here, but it's probably + not worth it. But the later users cannot deal with + bad apertures and turning on the aperture over memory + causes very strange problems, so it's better to + panic early. */ + panic("Not enough memory for aperture"); + } + } else { + return; + } + + /* Fix up the north bridges */ + for (num = 24; num < 32; num++) { + if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) + continue; + + /* Don't enable translation yet. That is done later. + Assume this BIOS didn't initialise the GART so + just overwrite all previous bits */ + write_pci_config(0, num, 3, 0x90, aper_order<<1); + write_pci_config(0, num, 3, 0x94, aper_alloc>>25); + } +} diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c new file mode 100644 index 000000000000..3d67ae18d762 --- /dev/null +++ b/arch/x86/kernel/apic_32.c @@ -0,0 +1,1566 @@ +/* + * Local APIC handling, local APIC timers + * + * (c) 1999, 2000 Ingo Molnar <mingo@redhat.com> + * + * Fixes + * Maciej W. Rozycki : Bits for genuine 82489DX APICs; + * thanks to Eric Gilmore + * and Rolf G. Tews + * for testing these extensively. + * Maciej W. Rozycki : Various updates and fixes. + * Mikael Pettersson : Power Management for UP-APIC. + * Pavel Machek and + * Mikael Pettersson : PM converted to driver model. + */ + +#include <linux/init.h> + +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/interrupt.h> +#include <linux/mc146818rtc.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> +#include <linux/clockchips.h> +#include <linux/acpi_pmtmr.h> +#include <linux/module.h> +#include <linux/dmi.h> + +#include <asm/atomic.h> +#include <asm/smp.h> +#include <asm/mtrr.h> +#include <asm/mpspec.h> +#include <asm/desc.h> +#include <asm/arch_hooks.h> +#include <asm/hpet.h> +#include <asm/i8253.h> +#include <asm/nmi.h> + +#include <mach_apic.h> +#include <mach_apicdef.h> +#include <mach_ipi.h> + +#include "io_ports.h" + +/* + * Sanity check + */ +#if (SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F +# error SPURIOUS_APIC_VECTOR definition error +#endif + +/* + * Knob to control our willingness to enable the local APIC. + * + * -1=force-disable, +1=force-enable + */ +static int enable_local_apic __initdata = 0; + +/* Local APIC timer verification ok */ +static int local_apic_timer_verify_ok; +/* Disable local APIC timer from the kernel commandline or via dmi quirk + or using CPU MSR check */ +int local_apic_timer_disabled; +/* Local APIC timer works in C2 */ +int local_apic_timer_c2_ok; +EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); + +/* + * Debug level, exported for io_apic.c + */ +int apic_verbosity; + +static unsigned int calibration_result; + +static int lapic_next_event(unsigned long delta, + struct clock_event_device *evt); +static void lapic_timer_setup(enum clock_event_mode mode, + struct clock_event_device *evt); +static void lapic_timer_broadcast(cpumask_t mask); +static void apic_pm_activate(void); + +/* + * The local apic timer can be used for any function which is CPU local. + */ +static struct clock_event_device lapic_clockevent = { + .name = "lapic", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT + | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, + .shift = 32, + .set_mode = lapic_timer_setup, + .set_next_event = lapic_next_event, + .broadcast = lapic_timer_broadcast, + .rating = 100, + .irq = -1, +}; +static DEFINE_PER_CPU(struct clock_event_device, lapic_events); + +/* Local APIC was disabled by the BIOS and enabled by the kernel */ +static int enabled_via_apicbase; + +/* + * Get the LAPIC version + */ +static inline int lapic_get_version(void) +{ + return GET_APIC_VERSION(apic_read(APIC_LVR)); +} + +/* + * Check, if the APIC is integrated or a seperate chip + */ +static inline int lapic_is_integrated(void) +{ + return APIC_INTEGRATED(lapic_get_version()); +} + +/* + * Check, whether this is a modern or a first generation APIC + */ +static int modern_apic(void) +{ + /* AMD systems use old APIC versions, so check the CPU */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + boot_cpu_data.x86 >= 0xf) + return 1; + return lapic_get_version() >= 0x14; +} + +void apic_wait_icr_idle(void) +{ + while (apic_read(APIC_ICR) & APIC_ICR_BUSY) + cpu_relax(); +} + +unsigned long safe_apic_wait_icr_idle(void) +{ + unsigned long send_status; + int timeout; + + timeout = 0; + do { + send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; + if (!send_status) + break; + udelay(100); + } while (timeout++ < 1000); + + return send_status; +} + +/** + * enable_NMI_through_LVT0 - enable NMI through local vector table 0 + */ +void enable_NMI_through_LVT0 (void * dummy) +{ + unsigned int v = APIC_DM_NMI; + + /* Level triggered for 82489DX */ + if (!lapic_is_integrated()) + v |= APIC_LVT_LEVEL_TRIGGER; + apic_write_around(APIC_LVT0, v); +} + +/** + * get_physical_broadcast - Get number of physical broadcast IDs + */ +int get_physical_broadcast(void) +{ + return modern_apic() ? 0xff : 0xf; +} + +/** + * lapic_get_maxlvt - get the maximum number of local vector table entries + */ +int lapic_get_maxlvt(void) +{ + unsigned int v = apic_read(APIC_LVR); + + /* 82489DXs do not report # of LVT entries. */ + return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; +} + +/* + * Local APIC timer + */ + +/* Clock divisor is set to 16 */ +#define APIC_DIVISOR 16 + +/* + * This function sets up the local APIC timer, with a timeout of + * 'clocks' APIC bus clock. During calibration we actually call + * this function twice on the boot CPU, once with a bogus timeout + * value, second time for real. The other (noncalibrating) CPUs + * call this function only once, with the real, calibrated value. + * + * We do reads before writes even if unnecessary, to get around the + * P5 APIC double write bug. + */ +static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) +{ + unsigned int lvtt_value, tmp_value; + + lvtt_value = LOCAL_TIMER_VECTOR; + if (!oneshot) + lvtt_value |= APIC_LVT_TIMER_PERIODIC; + if (!lapic_is_integrated()) + lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); + + if (!irqen) + lvtt_value |= APIC_LVT_MASKED; + + apic_write_around(APIC_LVTT, lvtt_value); + + /* + * Divide PICLK by 16 + */ + tmp_value = apic_read(APIC_TDCR); + apic_write_around(APIC_TDCR, (tmp_value + & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) + | APIC_TDR_DIV_16); + + if (!oneshot) + apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); +} + +/* + * Program the next event, relative to now + */ +static int lapic_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + apic_write_around(APIC_TMICT, delta); + return 0; +} + +/* + * Setup the lapic timer in periodic or oneshot mode + */ +static void lapic_timer_setup(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + unsigned int v; + + /* Lapic used for broadcast ? */ + if (!local_apic_timer_verify_ok) + return; + + local_irq_save(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + case CLOCK_EVT_MODE_ONESHOT: + __setup_APIC_LVTT(calibration_result, + mode != CLOCK_EVT_MODE_PERIODIC, 1); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + v = apic_read(APIC_LVTT); + v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write_around(APIC_LVTT, v); + break; + case CLOCK_EVT_MODE_RESUME: + /* Nothing to do here */ + break; + } + + local_irq_restore(flags); +} + +/* + * Local APIC timer broadcast function + */ +static void lapic_timer_broadcast(cpumask_t mask) +{ +#ifdef CONFIG_SMP + send_IPI_mask(mask, LOCAL_TIMER_VECTOR); +#endif +} + +/* + * Setup the local APIC timer for this CPU. Copy the initilized values + * of the boot CPU and register the clock event in the framework. + */ +static void __devinit setup_APIC_timer(void) +{ + struct clock_event_device *levt = &__get_cpu_var(lapic_events); + + memcpy(levt, &lapic_clockevent, sizeof(*levt)); + levt->cpumask = cpumask_of_cpu(smp_processor_id()); + + clockevents_register_device(levt); +} + +/* + * In this functions we calibrate APIC bus clocks to the external timer. + * + * We want to do the calibration only once since we want to have local timer + * irqs syncron. CPUs connected by the same APIC bus have the very same bus + * frequency. + * + * This was previously done by reading the PIT/HPET and waiting for a wrap + * around to find out, that a tick has elapsed. I have a box, where the PIT + * readout is broken, so it never gets out of the wait loop again. This was + * also reported by others. + * + * Monitoring the jiffies value is inaccurate and the clockevents + * infrastructure allows us to do a simple substitution of the interrupt + * handler. + * + * The calibration routine also uses the pm_timer when possible, as the PIT + * happens to run way too slow (factor 2.3 on my VAIO CoreDuo, which goes + * back to normal later in the boot process). + */ + +#define LAPIC_CAL_LOOPS (HZ/10) + +static __initdata int lapic_cal_loops = -1; +static __initdata long lapic_cal_t1, lapic_cal_t2; +static __initdata unsigned long long lapic_cal_tsc1, lapic_cal_tsc2; +static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2; +static __initdata unsigned long lapic_cal_j1, lapic_cal_j2; + +/* + * Temporary interrupt handler. + */ +static void __init lapic_cal_handler(struct clock_event_device *dev) +{ + unsigned long long tsc = 0; + long tapic = apic_read(APIC_TMCCT); + unsigned long pm = acpi_pm_read_early(); + + if (cpu_has_tsc) + rdtscll(tsc); + + switch (lapic_cal_loops++) { + case 0: + lapic_cal_t1 = tapic; + lapic_cal_tsc1 = tsc; + lapic_cal_pm1 = pm; + lapic_cal_j1 = jiffies; + break; + + case LAPIC_CAL_LOOPS: + lapic_cal_t2 = tapic; + lapic_cal_tsc2 = tsc; + if (pm < lapic_cal_pm1) + pm += ACPI_PM_OVRRUN; + lapic_cal_pm2 = pm; + lapic_cal_j2 = jiffies; + break; + } +} + +/* + * Setup the boot APIC + * + * Calibrate and verify the result. + */ +void __init setup_boot_APIC_clock(void) +{ + struct clock_event_device *levt = &__get_cpu_var(lapic_events); + const long pm_100ms = PMTMR_TICKS_PER_SEC/10; + const long pm_thresh = pm_100ms/100; + void (*real_handler)(struct clock_event_device *dev); + unsigned long deltaj; + long delta, deltapm; + int pm_referenced = 0; + + /* + * The local apic timer can be disabled via the kernel + * commandline or from the CPU detection code. Register the lapic + * timer as a dummy clock event source on SMP systems, so the + * broadcast mechanism is used. On UP systems simply ignore it. + */ + if (local_apic_timer_disabled) { + /* No broadcast on UP ! */ + if (num_possible_cpus() > 1) + setup_APIC_timer(); + return; + } + + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); + + local_irq_disable(); + + /* Replace the global interrupt handler */ + real_handler = global_clock_event->event_handler; + global_clock_event->event_handler = lapic_cal_handler; + + /* + * Setup the APIC counter to 1e9. There is no way the lapic + * can underflow in the 100ms detection time frame + */ + __setup_APIC_LVTT(1000000000, 0, 0); + + /* Let the interrupts run */ + local_irq_enable(); + + while (lapic_cal_loops <= LAPIC_CAL_LOOPS) + cpu_relax(); + + local_irq_disable(); + + /* Restore the real event handler */ + global_clock_event->event_handler = real_handler; + + /* Build delta t1-t2 as apic timer counts down */ + delta = lapic_cal_t1 - lapic_cal_t2; + apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta); + + /* Check, if the PM timer is available */ + deltapm = lapic_cal_pm2 - lapic_cal_pm1; + apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm); + + if (deltapm) { + unsigned long mult; + u64 res; + + mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, 22); + + if (deltapm > (pm_100ms - pm_thresh) && + deltapm < (pm_100ms + pm_thresh)) { + apic_printk(APIC_VERBOSE, "... PM timer result ok\n"); + } else { + res = (((u64) deltapm) * mult) >> 22; + do_div(res, 1000000); + printk(KERN_WARNING "APIC calibration not consistent " + "with PM Timer: %ldms instead of 100ms\n", + (long)res); + /* Correct the lapic counter value */ + res = (((u64) delta ) * pm_100ms); + do_div(res, deltapm); + printk(KERN_INFO "APIC delta adjusted to PM-Timer: " + "%lu (%ld)\n", (unsigned long) res, delta); + delta = (long) res; + } + pm_referenced = 1; + } + + /* Calculate the scaled math multiplication factor */ + lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS, 32); + lapic_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); + lapic_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &lapic_clockevent); + + calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS; + + apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta); + apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult); + apic_printk(APIC_VERBOSE, "..... calibration result: %u\n", + calibration_result); + + if (cpu_has_tsc) { + delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1); + apic_printk(APIC_VERBOSE, "..... CPU clock speed is " + "%ld.%04ld MHz.\n", + (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ), + (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ)); + } + + apic_printk(APIC_VERBOSE, "..... host bus clock speed is " + "%u.%04u MHz.\n", + calibration_result / (1000000 / HZ), + calibration_result % (1000000 / HZ)); + + local_apic_timer_verify_ok = 1; + + /* We trust the pm timer based calibration */ + if (!pm_referenced) { + apic_printk(APIC_VERBOSE, "... verify APIC timer\n"); + + /* + * Setup the apic timer manually + */ + levt->event_handler = lapic_cal_handler; + lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt); + lapic_cal_loops = -1; + + /* Let the interrupts run */ + local_irq_enable(); + + while (lapic_cal_loops <= LAPIC_CAL_LOOPS) + cpu_relax(); + + local_irq_disable(); + + /* Stop the lapic timer */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt); + + local_irq_enable(); + + /* Jiffies delta */ + deltaj = lapic_cal_j2 - lapic_cal_j1; + apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj); + + /* Check, if the jiffies result is consistent */ + if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2) + apic_printk(APIC_VERBOSE, "... jiffies result ok\n"); + else + local_apic_timer_verify_ok = 0; + } else + local_irq_enable(); + + if (!local_apic_timer_verify_ok) { + printk(KERN_WARNING + "APIC timer disabled due to verification failure.\n"); + /* No broadcast on UP ! */ + if (num_possible_cpus() == 1) + return; + } else { + /* + * If nmi_watchdog is set to IO_APIC, we need the + * PIT/HPET going. Otherwise register lapic as a dummy + * device. + */ + if (nmi_watchdog != NMI_IO_APIC) + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; + else + printk(KERN_WARNING "APIC timer registered as dummy," + " due to nmi_watchdog=1!\n"); + } + + /* Setup the lapic or request the broadcast */ + setup_APIC_timer(); +} + +void __devinit setup_secondary_APIC_clock(void) +{ + setup_APIC_timer(); +} + +/* + * The guts of the apic timer interrupt + */ +static void local_apic_timer_interrupt(void) +{ + int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(lapic_events, cpu); + + /* + * Normally we should not be here till LAPIC has been initialized but + * in some cases like kdump, its possible that there is a pending LAPIC + * timer interrupt from previous kernel's context and is delivered in + * new kernel the moment interrupts are enabled. + * + * Interrupts are enabled early and LAPIC is setup much later, hence + * its possible that when we get here evt->event_handler is NULL. + * Check for event_handler being NULL and discard the interrupt as + * spurious. + */ + if (!evt->event_handler) { + printk(KERN_WARNING + "Spurious LAPIC timer interrupt on cpu %d\n", cpu); + /* Switch it off */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); + return; + } + + per_cpu(irq_stat, cpu).apic_timer_irqs++; + + evt->event_handler(evt); +} + +/* + * Local APIC timer interrupt. This is the most natural way for doing + * local interrupts, but local timer interrupts can be emulated by + * broadcast interrupts too. [in case the hw doesn't support APIC timers] + * + * [ if a single-CPU system runs an SMP kernel then we call the local + * interrupt as well. Thus we cannot inline the local irq ... ] + */ + +void fastcall smp_apic_timer_interrupt(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + + /* + * NOTE! We'd better ACK the irq immediately, + * because timer handling can be slow. + */ + ack_APIC_irq(); + /* + * update_process_times() expects us to have done irq_enter(). + * Besides, if we don't timer interrupts ignore the global + * interrupt lock, which is the WrongThing (tm) to do. + */ + irq_enter(); + local_apic_timer_interrupt(); + irq_exit(); + + set_irq_regs(old_regs); +} + +int setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; +} + +/* + * Local APIC start and shutdown + */ + +/** + * clear_local_APIC - shutdown the local APIC + * + * This is called, when a CPU is disabled and before rebooting, so the state of + * the local APIC has no dangling leftovers. Also used to cleanout any BIOS + * leftovers during boot. + */ +void clear_local_APIC(void) +{ + int maxlvt = lapic_get_maxlvt(); + unsigned long v; + + /* + * Masking an LVT entry can trigger a local APIC error + * if the vector is zero. Mask LVTERR first to prevent this. + */ + if (maxlvt >= 3) { + v = ERROR_APIC_VECTOR; /* any non-zero vector will do */ + apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED); + } + /* + * Careful: we have to set masks only first to deassert + * any level-triggered sources. + */ + v = apic_read(APIC_LVTT); + apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED); + v = apic_read(APIC_LVT0); + apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); + v = apic_read(APIC_LVT1); + apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED); + if (maxlvt >= 4) { + v = apic_read(APIC_LVTPC); + apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED); + } + + /* lets not touch this if we didn't frob it */ +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) { + v = apic_read(APIC_LVTTHMR); + apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED); + } +#endif + /* + * Clean APIC state for other OSs: + */ + apic_write_around(APIC_LVTT, APIC_LVT_MASKED); + apic_write_around(APIC_LVT0, APIC_LVT_MASKED); + apic_write_around(APIC_LVT1, APIC_LVT_MASKED); + if (maxlvt >= 3) + apic_write_around(APIC_LVTERR, APIC_LVT_MASKED); + if (maxlvt >= 4) + apic_write_around(APIC_LVTPC, APIC_LVT_MASKED); + +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) + apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED); +#endif + /* Integrated APIC (!82489DX) ? */ + if (lapic_is_integrated()) { + if (maxlvt > 3) + /* Clear ESR due to Pentium errata 3AP and 11AP */ + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + } +} + +/** + * disable_local_APIC - clear and disable the local APIC + */ +void disable_local_APIC(void) +{ + unsigned long value; + + clear_local_APIC(); + + /* + * Disable APIC (implies clearing of registers + * for 82489DX!). + */ + value = apic_read(APIC_SPIV); + value &= ~APIC_SPIV_APIC_ENABLED; + apic_write_around(APIC_SPIV, value); + + /* + * When LAPIC was disabled by the BIOS and enabled by the kernel, + * restore the disabled state. + */ + if (enabled_via_apicbase) { + unsigned int l, h; + + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_ENABLE; + wrmsr(MSR_IA32_APICBASE, l, h); + } +} + +/* + * If Linux enabled the LAPIC against the BIOS default disable it down before + * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and + * not power-off. Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. + */ +void lapic_shutdown(void) +{ + unsigned long flags; + + if (!cpu_has_apic) + return; + + local_irq_save(flags); + clear_local_APIC(); + + if (enabled_via_apicbase) + disable_local_APIC(); + + local_irq_restore(flags); +} + +/* + * This is to verify that we're looking at a real local APIC. + * Check these against your board if the CPUs aren't getting + * started for no apparent reason. + */ +int __init verify_local_APIC(void) +{ + unsigned int reg0, reg1; + + /* + * The version register is read-only in a real APIC. + */ + reg0 = apic_read(APIC_LVR); + apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0); + apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK); + reg1 = apic_read(APIC_LVR); + apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1); + + /* + * The two version reads above should print the same + * numbers. If the second one is different, then we + * poke at a non-APIC. + */ + if (reg1 != reg0) + return 0; + + /* + * Check if the version looks reasonably. + */ + reg1 = GET_APIC_VERSION(reg0); + if (reg1 == 0x00 || reg1 == 0xff) + return 0; + reg1 = lapic_get_maxlvt(); + if (reg1 < 0x02 || reg1 == 0xff) + return 0; + + /* + * The ID register is read/write in a real APIC. + */ + reg0 = apic_read(APIC_ID); + apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); + + /* + * The next two are just to see if we have sane values. + * They're only really relevant if we're in Virtual Wire + * compatibility mode, but most boxes are anymore. + */ + reg0 = apic_read(APIC_LVT0); + apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0); + reg1 = apic_read(APIC_LVT1); + apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1); + + return 1; +} + +/** + * sync_Arb_IDs - synchronize APIC bus arbitration IDs + */ +void __init sync_Arb_IDs(void) +{ + /* + * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not + * needed on AMD. + */ + if (modern_apic()) + return; + /* + * Wait for idle. + */ + apic_wait_icr_idle(); + + apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); + apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG + | APIC_DM_INIT); +} + +/* + * An initial setup of the virtual wire mode. + */ +void __init init_bsp_APIC(void) +{ + unsigned long value; + + /* + * Don't do the setup now if we have a SMP BIOS as the + * through-I/O-APIC virtual wire mode might be active. + */ + if (smp_found_config || !cpu_has_apic) + return; + + /* + * Do not trust the local APIC being empty at bootup. + */ + clear_local_APIC(); + + /* + * Enable APIC. + */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + + /* This bit is reserved on P4/Xeon and should be cleared */ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + (boot_cpu_data.x86 == 15)) + value &= ~APIC_SPIV_FOCUS_DISABLED; + else + value |= APIC_SPIV_FOCUS_DISABLED; + value |= SPURIOUS_APIC_VECTOR; + apic_write_around(APIC_SPIV, value); + + /* + * Set up the virtual wire mode. + */ + apic_write_around(APIC_LVT0, APIC_DM_EXTINT); + value = APIC_DM_NMI; + if (!lapic_is_integrated()) /* 82489DX */ + value |= APIC_LVT_LEVEL_TRIGGER; + apic_write_around(APIC_LVT1, value); +} + +/** + * setup_local_APIC - setup the local APIC + */ +void __devinit setup_local_APIC(void) +{ + unsigned long oldvalue, value, maxlvt, integrated; + int i, j; + + /* Pound the ESR really hard over the head with a big hammer - mbligh */ + if (esr_disable) { + apic_write(APIC_ESR, 0); + apic_write(APIC_ESR, 0); + apic_write(APIC_ESR, 0); + apic_write(APIC_ESR, 0); + } + + integrated = lapic_is_integrated(); + + /* + * Double-check whether this APIC is really registered. + */ + if (!apic_id_registered()) + BUG(); + + /* + * Intel recommends to set DFR, LDR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ + init_apic_ldr(); + + /* + * Set Task Priority to 'accept all'. We never change this + * later on. + */ + value = apic_read(APIC_TASKPRI); + value &= ~APIC_TPRI_MASK; + apic_write_around(APIC_TASKPRI, value); + + /* + * After a crash, we no longer service the interrupts and a pending + * interrupt from previous kernel might still have ISR bit set. + * + * Most probably by now CPU has serviced that pending interrupt and + * it might not have done the ack_APIC_irq() because it thought, + * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it + * does not clear the ISR bit and cpu thinks it has already serivced + * the interrupt. Hence a vector might get locked. It was noticed + * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. + */ + for (i = APIC_ISR_NR - 1; i >= 0; i--) { + value = apic_read(APIC_ISR + i*0x10); + for (j = 31; j >= 0; j--) { + if (value & (1<<j)) + ack_APIC_irq(); + } + } + + /* + * Now that we are all set up, enable the APIC + */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + /* + * Enable APIC + */ + value |= APIC_SPIV_APIC_ENABLED; + + /* + * Some unknown Intel IO/APIC (or APIC) errata is biting us with + * certain networking cards. If high frequency interrupts are + * happening on a particular IOAPIC pin, plus the IOAPIC routing + * entry is masked/unmasked at a high rate as well then sooner or + * later IOAPIC line gets 'stuck', no more interrupts are received + * from the device. If focus CPU is disabled then the hang goes + * away, oh well :-( + * + * [ This bug can be reproduced easily with a level-triggered + * PCI Ne2000 networking cards and PII/PIII processors, dual + * BX chipset. ] + */ + /* + * Actually disabling the focus CPU check just makes the hang less + * frequent as it makes the interrupt distributon model be more + * like LRU than MRU (the short-term load is more even across CPUs). + * See also the comment in end_level_ioapic_irq(). --macro + */ + + /* Enable focus processor (bit==0) */ + value &= ~APIC_SPIV_FOCUS_DISABLED; + + /* + * Set spurious IRQ vector + */ + value |= SPURIOUS_APIC_VECTOR; + apic_write_around(APIC_SPIV, value); + + /* + * Set up LVT0, LVT1: + * + * set up through-local-APIC on the BP's LINT0. This is not + * strictly necessery in pure symmetric-IO mode, but sometimes + * we delegate interrupts to the 8259A. + */ + /* + * TODO: set up through-local-APIC from through-I/O-APIC? --macro + */ + value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; + if (!smp_processor_id() && (pic_mode || !value)) { + value = APIC_DM_EXTINT; + apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", + smp_processor_id()); + } else { + value = APIC_DM_EXTINT | APIC_LVT_MASKED; + apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", + smp_processor_id()); + } + apic_write_around(APIC_LVT0, value); + + /* + * only the BP should see the LINT1 NMI signal, obviously. + */ + if (!smp_processor_id()) + value = APIC_DM_NMI; + else + value = APIC_DM_NMI | APIC_LVT_MASKED; + if (!integrated) /* 82489DX */ + value |= APIC_LVT_LEVEL_TRIGGER; + apic_write_around(APIC_LVT1, value); + + if (integrated && !esr_disable) { /* !82489DX */ + maxlvt = lapic_get_maxlvt(); + if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); + oldvalue = apic_read(APIC_ESR); + + /* enables sending errors */ + value = ERROR_APIC_VECTOR; + apic_write_around(APIC_LVTERR, value); + /* + * spec says clear errors after enabling vector. + */ + if (maxlvt > 3) + apic_write(APIC_ESR, 0); + value = apic_read(APIC_ESR); + if (value != oldvalue) + apic_printk(APIC_VERBOSE, "ESR value before enabling " + "vector: 0x%08lx after: 0x%08lx\n", + oldvalue, value); + } else { + if (esr_disable) + /* + * Something untraceble is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + else + printk(KERN_INFO "No ESR for 82489DX.\n"); + } + + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write_around(APIC_LVTT, value); + + setup_apic_nmi_watchdog(NULL); + apic_pm_activate(); +} + +/* + * Detect and initialize APIC + */ +static int __init detect_init_APIC (void) +{ + u32 h, l, features; + + /* Disabled by kernel option? */ + if (enable_local_apic < 0) + return -1; + + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) || + (boot_cpu_data.x86 == 15)) + break; + goto no_apic; + case X86_VENDOR_INTEL: + if (boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15 || + (boot_cpu_data.x86 == 5 && cpu_has_apic)) + break; + goto no_apic; + default: + goto no_apic; + } + + if (!cpu_has_apic) { + /* + * Over-ride BIOS and try to enable the local APIC only if + * "lapic" specified. + */ + if (enable_local_apic <= 0) { + printk(KERN_INFO "Local APIC disabled by BIOS -- " + "you can enable it with \"lapic\"\n"); + return -1; + } + /* + * Some BIOSes disable the local APIC in the APIC_BASE + * MSR. This can only be done in software for Intel P6 or later + * and AMD K7 (Model > 1) or later. + */ + rdmsr(MSR_IA32_APICBASE, l, h); + if (!(l & MSR_IA32_APICBASE_ENABLE)) { + printk(KERN_INFO + "Local APIC disabled by BIOS -- reenabling.\n"); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; + wrmsr(MSR_IA32_APICBASE, l, h); + enabled_via_apicbase = 1; + } + } + /* + * The APIC feature bit should now be enabled + * in `cpuid' + */ + features = cpuid_edx(1); + if (!(features & (1 << X86_FEATURE_APIC))) { + printk(KERN_WARNING "Could not enable APIC!\n"); + return -1; + } + set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* The BIOS may have set up the APIC at some other address */ + rdmsr(MSR_IA32_APICBASE, l, h); + if (l & MSR_IA32_APICBASE_ENABLE) + mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; + + if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) + nmi_watchdog = NMI_LOCAL_APIC; + + printk(KERN_INFO "Found and enabled local APIC!\n"); + + apic_pm_activate(); + + return 0; + +no_apic: + printk(KERN_INFO "No local APIC present or hardware disabled\n"); + return -1; +} + +/** + * init_apic_mappings - initialize APIC mappings + */ +void __init init_apic_mappings(void) +{ + unsigned long apic_phys; + + /* + * If no local APIC can be found then set up a fake all + * zeroes page to simulate the local APIC and another + * one for the IO-APIC. + */ + if (!smp_found_config && detect_init_APIC()) { + apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); + apic_phys = __pa(apic_phys); + } else + apic_phys = mp_lapic_addr; + + set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE, + apic_phys); + + /* + * Fetch the APIC ID of the BSP in case we have a + * default configuration (or the MP table is broken). + */ + if (boot_cpu_physical_apicid == -1U) + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); + +#ifdef CONFIG_X86_IO_APIC + { + unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; + int i; + + for (i = 0; i < nr_ioapics; i++) { + if (smp_found_config) { + ioapic_phys = mp_ioapics[i].mpc_apicaddr; + if (!ioapic_phys) { + printk(KERN_ERR + "WARNING: bogus zero IO-APIC " + "address found in MPTABLE, " + "disabling IO/APIC support!\n"); + smp_found_config = 0; + skip_ioapic_setup = 1; + goto fake_ioapic_page; + } + } else { +fake_ioapic_page: + ioapic_phys = (unsigned long) + alloc_bootmem_pages(PAGE_SIZE); + ioapic_phys = __pa(ioapic_phys); + } + set_fixmap_nocache(idx, ioapic_phys); + printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n", + __fix_to_virt(idx), ioapic_phys); + idx++; + } + } +#endif +} + +/* + * This initializes the IO-APIC and APIC hardware if this is + * a UP kernel. + */ +int __init APIC_init_uniprocessor (void) +{ + if (enable_local_apic < 0) + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + + if (!smp_found_config && !cpu_has_apic) + return -1; + + /* + * Complain if the BIOS pretends there is one. + */ + if (!cpu_has_apic && + APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { + printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return -1; + } + + verify_local_APIC(); + + connect_bsp_APIC(); + + /* + * Hack: In case of kdump, after a crash, kernel might be booting + * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid + * might be zero if read from MP tables. Get it from LAPIC. + */ +#ifdef CONFIG_CRASH_DUMP + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); +#endif + phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + + setup_local_APIC(); + +#ifdef CONFIG_X86_IO_APIC + if (smp_found_config) + if (!skip_ioapic_setup && nr_ioapics) + setup_IO_APIC(); +#endif + setup_boot_clock(); + + return 0; +} + +/* + * APIC command line parameters + */ +static int __init parse_lapic(char *arg) +{ + enable_local_apic = 1; + return 0; +} +early_param("lapic", parse_lapic); + +static int __init parse_nolapic(char *arg) +{ + enable_local_apic = -1; + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return 0; +} +early_param("nolapic", parse_nolapic); + +static int __init parse_disable_lapic_timer(char *arg) +{ + local_apic_timer_disabled = 1; + return 0; +} +early_param("nolapic_timer", parse_disable_lapic_timer); + +static int __init parse_lapic_timer_c2_ok(char *arg) +{ + local_apic_timer_c2_ok = 1; + return 0; +} +early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); + +static int __init apic_set_verbosity(char *str) +{ + if (strcmp("debug", str) == 0) + apic_verbosity = APIC_DEBUG; + else if (strcmp("verbose", str) == 0) + apic_verbosity = APIC_VERBOSE; + return 1; +} + +__setup("apic=", apic_set_verbosity); + + +/* + * Local APIC interrupts + */ + +/* + * This interrupt should _never_ happen with our APIC/SMP architecture + */ +void smp_spurious_interrupt(struct pt_regs *regs) +{ + unsigned long v; + + irq_enter(); + /* + * Check if this really is a spurious interrupt and ACK it + * if it is a vectored one. Just in case... + * Spurious interrupts should not be ACKed. + */ + v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1)); + if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f))) + ack_APIC_irq(); + + /* see sw-dev-man vol 3, chapter 7.4.13.5 */ + printk(KERN_INFO "spurious APIC interrupt on CPU#%d, " + "should never happen.\n", smp_processor_id()); + irq_exit(); +} + +/* + * This interrupt should never happen with our APIC/SMP architecture + */ +void smp_error_interrupt(struct pt_regs *regs) +{ + unsigned long v, v1; + + irq_enter(); + /* First tickle the hardware, only then report what went on. -- REW */ + v = apic_read(APIC_ESR); + apic_write(APIC_ESR, 0); + v1 = apic_read(APIC_ESR); + ack_APIC_irq(); + atomic_inc(&irq_err_count); + + /* Here is what the APIC error bits mean: + 0: Send CS error + 1: Receive CS error + 2: Send accept error + 3: Receive accept error + 4: Reserved + 5: Send illegal vector + 6: Received illegal vector + 7: Illegal register address + */ + printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n", + smp_processor_id(), v , v1); + irq_exit(); +} + +/* + * Initialize APIC interrupts + */ +void __init apic_intr_init(void) +{ +#ifdef CONFIG_SMP + smp_intr_init(); +#endif + /* self generated IPI for local APIC timer */ + set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + /* thermal monitor LVT interrupt */ +#ifdef CONFIG_X86_MCE_P4THERMAL + set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif +} + +/** + * connect_bsp_APIC - attach the APIC to the interrupt system + */ +void __init connect_bsp_APIC(void) +{ + if (pic_mode) { + /* + * Do not trust the local APIC being empty at bootup. + */ + clear_local_APIC(); + /* + * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's + * local APIC to INT and NMI lines. + */ + apic_printk(APIC_VERBOSE, "leaving PIC mode, " + "enabling APIC mode.\n"); + outb(0x70, 0x22); + outb(0x01, 0x23); + } + enable_apic_mode(); +} + +/** + * disconnect_bsp_APIC - detach the APIC from the interrupt system + * @virt_wire_setup: indicates, whether virtual wire mode is selected + * + * Virtual wire mode is necessary to deliver legacy interrupts even when the + * APIC is disabled. + */ +void disconnect_bsp_APIC(int virt_wire_setup) +{ + if (pic_mode) { + /* + * Put the board back into PIC mode (has an effect only on + * certain older boards). Note that APIC interrupts, including + * IPIs, won't work beyond this point! The only exception are + * INIT IPIs. + */ + apic_printk(APIC_VERBOSE, "disabling APIC mode, " + "entering PIC mode.\n"); + outb(0x70, 0x22); + outb(0x00, 0x23); + } else { + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; + + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write_around(APIC_SPIV, value); + + if (!virt_wire_setup) { + /* + * For LVT0 make it edge triggered, active high, + * external and enabled + */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write_around(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED); + } + + /* + * For LVT1 make it edge triggered, active high, nmi and + * enabled + */ + value = apic_read(APIC_LVT1); + value &= ~( + APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write_around(APIC_LVT1, value); + } +} + +/* + * Power management + */ +#ifdef CONFIG_PM + +static struct { + int active; + /* r/w apic fields */ + unsigned int apic_id; + unsigned int apic_taskpri; + unsigned int apic_ldr; + unsigned int apic_dfr; + unsigned int apic_spiv; + unsigned int apic_lvtt; + unsigned int apic_lvtpc; + unsigned int apic_lvt0; + unsigned int apic_lvt1; + unsigned int apic_lvterr; + unsigned int apic_tmict; + unsigned int apic_tdcr; + unsigned int apic_thmr; +} apic_pm_state; + +static int lapic_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned long flags; + int maxlvt; + + if (!apic_pm_state.active) + return 0; + + maxlvt = lapic_get_maxlvt(); + + apic_pm_state.apic_id = apic_read(APIC_ID); + apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); + apic_pm_state.apic_ldr = apic_read(APIC_LDR); + apic_pm_state.apic_dfr = apic_read(APIC_DFR); + apic_pm_state.apic_spiv = apic_read(APIC_SPIV); + apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); + if (maxlvt >= 4) + apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); + apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); + apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); + apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); + apic_pm_state.apic_tmict = apic_read(APIC_TMICT); + apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) + apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); +#endif + + local_irq_save(flags); + disable_local_APIC(); + local_irq_restore(flags); + return 0; +} + +static int lapic_resume(struct sys_device *dev) +{ + unsigned int l, h; + unsigned long flags; + int maxlvt; + + if (!apic_pm_state.active) + return 0; + + maxlvt = lapic_get_maxlvt(); + + local_irq_save(flags); + + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + + apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); + apic_write(APIC_ID, apic_pm_state.apic_id); + apic_write(APIC_DFR, apic_pm_state.apic_dfr); + apic_write(APIC_LDR, apic_pm_state.apic_ldr); + apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); + apic_write(APIC_SPIV, apic_pm_state.apic_spiv); + apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); + apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) + apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); +#endif + if (maxlvt >= 4) + apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); + apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); + apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); + apic_write(APIC_TMICT, apic_pm_state.apic_tmict); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; +} + +/* + * This device has no shutdown method - fully functioning local APICs + * are needed on every CPU up until machine_halt/restart/poweroff. + */ + +static struct sysdev_class lapic_sysclass = { + set_kset_name("lapic"), + .resume = lapic_resume, + .suspend = lapic_suspend, +}; + +static struct sys_device device_lapic = { + .id = 0, + .cls = &lapic_sysclass, +}; + +static void __devinit apic_pm_activate(void) +{ + apic_pm_state.active = 1; +} + +static int __init init_lapic_sysfs(void) +{ + int error; + + if (!cpu_has_apic) + return 0; + /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ + + error = sysdev_class_register(&lapic_sysclass); + if (!error) + error = sysdev_register(&device_lapic); + return error; +} +device_initcall(init_lapic_sysfs); + +#else /* CONFIG_PM */ + +static void apic_pm_activate(void) { } + +#endif /* CONFIG_PM */ diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c new file mode 100644 index 000000000000..925758dbca0c --- /dev/null +++ b/arch/x86/kernel/apic_64.c @@ -0,0 +1,1253 @@ +/* + * Local APIC handling, local APIC timers + * + * (c) 1999, 2000 Ingo Molnar <mingo@redhat.com> + * + * Fixes + * Maciej W. Rozycki : Bits for genuine 82489DX APICs; + * thanks to Eric Gilmore + * and Rolf G. Tews + * for testing these extensively. + * Maciej W. Rozycki : Various updates and fixes. + * Mikael Pettersson : Power Management for UP-APIC. + * Pavel Machek and + * Mikael Pettersson : PM converted to driver model. + */ + +#include <linux/init.h> + +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/interrupt.h> +#include <linux/mc146818rtc.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/module.h> +#include <linux/ioport.h> + +#include <asm/atomic.h> +#include <asm/smp.h> +#include <asm/mtrr.h> +#include <asm/mpspec.h> +#include <asm/pgalloc.h> +#include <asm/mach_apic.h> +#include <asm/nmi.h> +#include <asm/idle.h> +#include <asm/proto.h> +#include <asm/timex.h> +#include <asm/hpet.h> +#include <asm/apic.h> + +int apic_mapped; +int apic_verbosity; +int apic_runs_main_timer; +int apic_calibrate_pmtmr __initdata; + +int disable_apic_timer __initdata; + +/* Local APIC timer works in C2? */ +int local_apic_timer_c2_ok; +EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); + +static struct resource *ioapic_resources; +static struct resource lapic_resource = { + .name = "Local APIC", + .flags = IORESOURCE_MEM | IORESOURCE_BUSY, +}; + +/* + * cpu_mask that denotes the CPUs that needs timer interrupt coming in as + * IPIs in place of local APIC timers + */ +static cpumask_t timer_interrupt_broadcast_ipi_mask; + +/* Using APIC to generate smp_local_timer_interrupt? */ +int using_apic_timer __read_mostly = 0; + +static void apic_pm_activate(void); + +void apic_wait_icr_idle(void) +{ + while (apic_read(APIC_ICR) & APIC_ICR_BUSY) + cpu_relax(); +} + +unsigned int safe_apic_wait_icr_idle(void) +{ + unsigned int send_status; + int timeout; + + timeout = 0; + do { + send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; + if (!send_status) + break; + udelay(100); + } while (timeout++ < 1000); + + return send_status; +} + +void enable_NMI_through_LVT0 (void * dummy) +{ + unsigned int v; + + /* unmask and set to NMI */ + v = APIC_DM_NMI; + apic_write(APIC_LVT0, v); +} + +int get_maxlvt(void) +{ + unsigned int v, maxlvt; + + v = apic_read(APIC_LVR); + maxlvt = GET_APIC_MAXLVT(v); + return maxlvt; +} + +/* + * 'what should we do if we get a hw irq event on an illegal vector'. + * each architecture has to answer this themselves. + */ +void ack_bad_irq(unsigned int irq) +{ + printk("unexpected IRQ trap at vector %02x\n", irq); + /* + * Currently unexpected vectors happen only on SMP and APIC. + * We _must_ ack these because every local APIC has only N + * irq slots per priority level, and a 'hanging, unacked' IRQ + * holds up an irq slot - in excessive cases (when multiple + * unexpected vectors occur) that might lock up the APIC + * completely. + * But don't ack when the APIC is disabled. -AK + */ + if (!disable_apic) + ack_APIC_irq(); +} + +void clear_local_APIC(void) +{ + int maxlvt; + unsigned int v; + + maxlvt = get_maxlvt(); + + /* + * Masking an LVT entry can trigger a local APIC error + * if the vector is zero. Mask LVTERR first to prevent this. + */ + if (maxlvt >= 3) { + v = ERROR_APIC_VECTOR; /* any non-zero vector will do */ + apic_write(APIC_LVTERR, v | APIC_LVT_MASKED); + } + /* + * Careful: we have to set masks only first to deassert + * any level-triggered sources. + */ + v = apic_read(APIC_LVTT); + apic_write(APIC_LVTT, v | APIC_LVT_MASKED); + v = apic_read(APIC_LVT0); + apic_write(APIC_LVT0, v | APIC_LVT_MASKED); + v = apic_read(APIC_LVT1); + apic_write(APIC_LVT1, v | APIC_LVT_MASKED); + if (maxlvt >= 4) { + v = apic_read(APIC_LVTPC); + apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); + } + + /* + * Clean APIC state for other OSs: + */ + apic_write(APIC_LVTT, APIC_LVT_MASKED); + apic_write(APIC_LVT0, APIC_LVT_MASKED); + apic_write(APIC_LVT1, APIC_LVT_MASKED); + if (maxlvt >= 3) + apic_write(APIC_LVTERR, APIC_LVT_MASKED); + if (maxlvt >= 4) + apic_write(APIC_LVTPC, APIC_LVT_MASKED); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); +} + +void disconnect_bsp_APIC(int virt_wire_setup) +{ + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; + + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write(APIC_SPIV, value); + + if (!virt_wire_setup) { + /* For LVT0 make it edge triggered, active high, external and enabled */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write(APIC_LVT0, APIC_LVT_MASKED); + } + + /* For LVT1 make it edge triggered, active high, nmi and enabled */ + value = apic_read(APIC_LVT1); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write(APIC_LVT1, value); +} + +void disable_local_APIC(void) +{ + unsigned int value; + + clear_local_APIC(); + + /* + * Disable APIC (implies clearing of registers + * for 82489DX!). + */ + value = apic_read(APIC_SPIV); + value &= ~APIC_SPIV_APIC_ENABLED; + apic_write(APIC_SPIV, value); +} + +/* + * This is to verify that we're looking at a real local APIC. + * Check these against your board if the CPUs aren't getting + * started for no apparent reason. + */ +int __init verify_local_APIC(void) +{ + unsigned int reg0, reg1; + + /* + * The version register is read-only in a real APIC. + */ + reg0 = apic_read(APIC_LVR); + apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0); + apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK); + reg1 = apic_read(APIC_LVR); + apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1); + + /* + * The two version reads above should print the same + * numbers. If the second one is different, then we + * poke at a non-APIC. + */ + if (reg1 != reg0) + return 0; + + /* + * Check if the version looks reasonably. + */ + reg1 = GET_APIC_VERSION(reg0); + if (reg1 == 0x00 || reg1 == 0xff) + return 0; + reg1 = get_maxlvt(); + if (reg1 < 0x02 || reg1 == 0xff) + return 0; + + /* + * The ID register is read/write in a real APIC. + */ + reg0 = apic_read(APIC_ID); + apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); + apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); + reg1 = apic_read(APIC_ID); + apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); + apic_write(APIC_ID, reg0); + if (reg1 != (reg0 ^ APIC_ID_MASK)) + return 0; + + /* + * The next two are just to see if we have sane values. + * They're only really relevant if we're in Virtual Wire + * compatibility mode, but most boxes are anymore. + */ + reg0 = apic_read(APIC_LVT0); + apic_printk(APIC_DEBUG,"Getting LVT0: %x\n", reg0); + reg1 = apic_read(APIC_LVT1); + apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1); + + return 1; +} + +void __init sync_Arb_IDs(void) +{ + /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */ + unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR)); + if (ver >= 0x14) /* P4 or higher */ + return; + + /* + * Wait for idle. + */ + apic_wait_icr_idle(); + + apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); + apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG + | APIC_DM_INIT); +} + +/* + * An initial setup of the virtual wire mode. + */ +void __init init_bsp_APIC(void) +{ + unsigned int value; + + /* + * Don't do the setup now if we have a SMP BIOS as the + * through-I/O-APIC virtual wire mode might be active. + */ + if (smp_found_config || !cpu_has_apic) + return; + + value = apic_read(APIC_LVR); + + /* + * Do not trust the local APIC being empty at bootup. + */ + clear_local_APIC(); + + /* + * Enable APIC. + */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= APIC_SPIV_FOCUS_DISABLED; + value |= SPURIOUS_APIC_VECTOR; + apic_write(APIC_SPIV, value); + + /* + * Set up the virtual wire mode. + */ + apic_write(APIC_LVT0, APIC_DM_EXTINT); + value = APIC_DM_NMI; + apic_write(APIC_LVT1, value); +} + +void __cpuinit setup_local_APIC (void) +{ + unsigned int value, maxlvt; + int i, j; + + value = apic_read(APIC_LVR); + + BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f); + + /* + * Double-check whether this APIC is really registered. + * This is meaningless in clustered apic mode, so we skip it. + */ + if (!apic_id_registered()) + BUG(); + + /* + * Intel recommends to set DFR, LDR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ + init_apic_ldr(); + + /* + * Set Task Priority to 'accept all'. We never change this + * later on. + */ + value = apic_read(APIC_TASKPRI); + value &= ~APIC_TPRI_MASK; + apic_write(APIC_TASKPRI, value); + + /* + * After a crash, we no longer service the interrupts and a pending + * interrupt from previous kernel might still have ISR bit set. + * + * Most probably by now CPU has serviced that pending interrupt and + * it might not have done the ack_APIC_irq() because it thought, + * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it + * does not clear the ISR bit and cpu thinks it has already serivced + * the interrupt. Hence a vector might get locked. It was noticed + * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. + */ + for (i = APIC_ISR_NR - 1; i >= 0; i--) { + value = apic_read(APIC_ISR + i*0x10); + for (j = 31; j >= 0; j--) { + if (value & (1<<j)) + ack_APIC_irq(); + } + } + + /* + * Now that we are all set up, enable the APIC + */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + /* + * Enable APIC + */ + value |= APIC_SPIV_APIC_ENABLED; + + /* We always use processor focus */ + + /* + * Set spurious IRQ vector + */ + value |= SPURIOUS_APIC_VECTOR; + apic_write(APIC_SPIV, value); + + /* + * Set up LVT0, LVT1: + * + * set up through-local-APIC on the BP's LINT0. This is not + * strictly necessary in pure symmetric-IO mode, but sometimes + * we delegate interrupts to the 8259A. + */ + /* + * TODO: set up through-local-APIC from through-I/O-APIC? --macro + */ + value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; + if (!smp_processor_id() && !value) { + value = APIC_DM_EXTINT; + apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", smp_processor_id()); + } else { + value = APIC_DM_EXTINT | APIC_LVT_MASKED; + apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", smp_processor_id()); + } + apic_write(APIC_LVT0, value); + + /* + * only the BP should see the LINT1 NMI signal, obviously. + */ + if (!smp_processor_id()) + value = APIC_DM_NMI; + else + value = APIC_DM_NMI | APIC_LVT_MASKED; + apic_write(APIC_LVT1, value); + + { + unsigned oldvalue; + maxlvt = get_maxlvt(); + oldvalue = apic_read(APIC_ESR); + value = ERROR_APIC_VECTOR; // enables sending errors + apic_write(APIC_LVTERR, value); + /* + * spec says clear errors after enabling vector. + */ + if (maxlvt > 3) + apic_write(APIC_ESR, 0); + value = apic_read(APIC_ESR); + if (value != oldvalue) + apic_printk(APIC_VERBOSE, + "ESR value after enabling vector: %08x, after %08x\n", + oldvalue, value); + } + + nmi_watchdog_default(); + setup_apic_nmi_watchdog(NULL); + apic_pm_activate(); +} + +#ifdef CONFIG_PM + +static struct { + /* 'active' is true if the local APIC was enabled by us and + not the BIOS; this signifies that we are also responsible + for disabling it before entering apm/acpi suspend */ + int active; + /* r/w apic fields */ + unsigned int apic_id; + unsigned int apic_taskpri; + unsigned int apic_ldr; + unsigned int apic_dfr; + unsigned int apic_spiv; + unsigned int apic_lvtt; + unsigned int apic_lvtpc; + unsigned int apic_lvt0; + unsigned int apic_lvt1; + unsigned int apic_lvterr; + unsigned int apic_tmict; + unsigned int apic_tdcr; + unsigned int apic_thmr; +} apic_pm_state; + +static int lapic_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned long flags; + int maxlvt; + + if (!apic_pm_state.active) + return 0; + + maxlvt = get_maxlvt(); + + apic_pm_state.apic_id = apic_read(APIC_ID); + apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); + apic_pm_state.apic_ldr = apic_read(APIC_LDR); + apic_pm_state.apic_dfr = apic_read(APIC_DFR); + apic_pm_state.apic_spiv = apic_read(APIC_SPIV); + apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); + if (maxlvt >= 4) + apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); + apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); + apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); + apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); + apic_pm_state.apic_tmict = apic_read(APIC_TMICT); + apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); +#ifdef CONFIG_X86_MCE_INTEL + if (maxlvt >= 5) + apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); +#endif + local_irq_save(flags); + disable_local_APIC(); + local_irq_restore(flags); + return 0; +} + +static int lapic_resume(struct sys_device *dev) +{ + unsigned int l, h; + unsigned long flags; + int maxlvt; + + if (!apic_pm_state.active) + return 0; + + maxlvt = get_maxlvt(); + + local_irq_save(flags); + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); + apic_write(APIC_ID, apic_pm_state.apic_id); + apic_write(APIC_DFR, apic_pm_state.apic_dfr); + apic_write(APIC_LDR, apic_pm_state.apic_ldr); + apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); + apic_write(APIC_SPIV, apic_pm_state.apic_spiv); + apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); + apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); +#ifdef CONFIG_X86_MCE_INTEL + if (maxlvt >= 5) + apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); +#endif + if (maxlvt >= 4) + apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); + apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); + apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); + apic_write(APIC_TMICT, apic_pm_state.apic_tmict); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; +} + +static struct sysdev_class lapic_sysclass = { + set_kset_name("lapic"), + .resume = lapic_resume, + .suspend = lapic_suspend, +}; + +static struct sys_device device_lapic = { + .id = 0, + .cls = &lapic_sysclass, +}; + +static void __cpuinit apic_pm_activate(void) +{ + apic_pm_state.active = 1; +} + +static int __init init_lapic_sysfs(void) +{ + int error; + if (!cpu_has_apic) + return 0; + /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ + error = sysdev_class_register(&lapic_sysclass); + if (!error) + error = sysdev_register(&device_lapic); + return error; +} +device_initcall(init_lapic_sysfs); + +#else /* CONFIG_PM */ + +static void apic_pm_activate(void) { } + +#endif /* CONFIG_PM */ + +static int __init apic_set_verbosity(char *str) +{ + if (str == NULL) { + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; + } + if (strcmp("debug", str) == 0) + apic_verbosity = APIC_DEBUG; + else if (strcmp("verbose", str) == 0) + apic_verbosity = APIC_VERBOSE; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", str); + return -EINVAL; + } + + return 0; +} +early_param("apic", apic_set_verbosity); + +/* + * Detect and enable local APICs on non-SMP boards. + * Original code written by Keir Fraser. + * On AMD64 we trust the BIOS - if it says no APIC it is likely + * not correctly set up (usually the APIC timer won't work etc.) + */ + +static int __init detect_init_APIC (void) +{ + if (!cpu_has_apic) { + printk(KERN_INFO "No local APIC present\n"); + return -1; + } + + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + boot_cpu_id = 0; + return 0; +} + +#ifdef CONFIG_X86_IO_APIC +static struct resource * __init ioapic_setup_resources(void) +{ +#define IOAPIC_RESOURCE_NAME_SIZE 11 + unsigned long n; + struct resource *res; + char *mem; + int i; + + if (nr_ioapics <= 0) + return NULL; + + n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); + n *= nr_ioapics; + + mem = alloc_bootmem(n); + res = (void *)mem; + + if (mem != NULL) { + memset(mem, 0, n); + mem += sizeof(struct resource) * nr_ioapics; + + for (i = 0; i < nr_ioapics; i++) { + res[i].name = mem; + res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; + sprintf(mem, "IOAPIC %u", i); + mem += IOAPIC_RESOURCE_NAME_SIZE; + } + } + + ioapic_resources = res; + + return res; +} + +static int __init ioapic_insert_resources(void) +{ + int i; + struct resource *r = ioapic_resources; + + if (!r) { + printk("IO APIC resources could be not be allocated.\n"); + return -1; + } + + for (i = 0; i < nr_ioapics; i++) { + insert_resource(&iomem_resource, r); + r++; + } + + return 0; +} + +/* Insert the IO APIC resources after PCI initialization has occured to handle + * IO APICS that are mapped in on a BAR in PCI space. */ +late_initcall(ioapic_insert_resources); +#endif + +void __init init_apic_mappings(void) +{ + unsigned long apic_phys; + + /* + * If no local APIC can be found then set up a fake all + * zeroes page to simulate the local APIC and another + * one for the IO-APIC. + */ + if (!smp_found_config && detect_init_APIC()) { + apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); + apic_phys = __pa(apic_phys); + } else + apic_phys = mp_lapic_addr; + + set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + apic_mapped = 1; + apic_printk(APIC_VERBOSE,"mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys); + + /* Put local APIC into the resource map. */ + lapic_resource.start = apic_phys; + lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1; + insert_resource(&iomem_resource, &lapic_resource); + + /* + * Fetch the APIC ID of the BSP in case we have a + * default configuration (or the MP table is broken). + */ + boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); + + { + unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; + int i; + struct resource *ioapic_res; + + ioapic_res = ioapic_setup_resources(); + for (i = 0; i < nr_ioapics; i++) { + if (smp_found_config) { + ioapic_phys = mp_ioapics[i].mpc_apicaddr; + } else { + ioapic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); + ioapic_phys = __pa(ioapic_phys); + } + set_fixmap_nocache(idx, ioapic_phys); + apic_printk(APIC_VERBOSE,"mapped IOAPIC to %016lx (%016lx)\n", + __fix_to_virt(idx), ioapic_phys); + idx++; + + if (ioapic_res != NULL) { + ioapic_res->start = ioapic_phys; + ioapic_res->end = ioapic_phys + (4 * 1024) - 1; + ioapic_res++; + } + } + } +} + +/* + * This function sets up the local APIC timer, with a timeout of + * 'clocks' APIC bus clock. During calibration we actually call + * this function twice on the boot CPU, once with a bogus timeout + * value, second time for real. The other (noncalibrating) CPUs + * call this function only once, with the real, calibrated value. + * + * We do reads before writes even if unnecessary, to get around the + * P5 APIC double write bug. + */ + +#define APIC_DIVISOR 16 + +static void __setup_APIC_LVTT(unsigned int clocks) +{ + unsigned int lvtt_value, tmp_value; + int cpu = smp_processor_id(); + + lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR; + + if (cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) + lvtt_value |= APIC_LVT_MASKED; + + apic_write(APIC_LVTT, lvtt_value); + + /* + * Divide PICLK by 16 + */ + tmp_value = apic_read(APIC_TDCR); + apic_write(APIC_TDCR, (tmp_value + & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) + | APIC_TDR_DIV_16); + + apic_write(APIC_TMICT, clocks/APIC_DIVISOR); +} + +static void setup_APIC_timer(unsigned int clocks) +{ + unsigned long flags; + + local_irq_save(flags); + + /* wait for irq slice */ + if (hpet_address && hpet_use_timer) { + u32 trigger = hpet_readl(HPET_T0_CMP); + while (hpet_readl(HPET_T0_CMP) == trigger) + /* do nothing */ ; + } else { + int c1, c2; + outb_p(0x00, 0x43); + c2 = inb_p(0x40); + c2 |= inb_p(0x40) << 8; + do { + c1 = c2; + outb_p(0x00, 0x43); + c2 = inb_p(0x40); + c2 |= inb_p(0x40) << 8; + } while (c2 - c1 < 300); + } + __setup_APIC_LVTT(clocks); + /* Turn off PIT interrupt if we use APIC timer as main timer. + Only works with the PM timer right now + TBD fix it for HPET too. */ + if ((pmtmr_ioport != 0) && + smp_processor_id() == boot_cpu_id && + apic_runs_main_timer == 1 && + !cpu_isset(boot_cpu_id, timer_interrupt_broadcast_ipi_mask)) { + stop_timer_interrupt(); + apic_runs_main_timer++; + } + local_irq_restore(flags); +} + +/* + * In this function we calibrate APIC bus clocks to the external + * timer. Unfortunately we cannot use jiffies and the timer irq + * to calibrate, since some later bootup code depends on getting + * the first irq? Ugh. + * + * We want to do the calibration only once since we + * want to have local timer irqs syncron. CPUs connected + * by the same APIC bus have the very same bus frequency. + * And we want to have irqs off anyways, no accidental + * APIC irq that way. + */ + +#define TICK_COUNT 100000000 + +static int __init calibrate_APIC_clock(void) +{ + unsigned apic, apic_start; + unsigned long tsc, tsc_start; + int result; + /* + * Put whatever arbitrary (but long enough) timeout + * value into the APIC clock, we just want to get the + * counter running for calibration. + */ + __setup_APIC_LVTT(4000000000); + + apic_start = apic_read(APIC_TMCCT); +#ifdef CONFIG_X86_PM_TIMER + if (apic_calibrate_pmtmr && pmtmr_ioport) { + pmtimer_wait(5000); /* 5ms wait */ + apic = apic_read(APIC_TMCCT); + result = (apic_start - apic) * 1000L / 5; + } else +#endif + { + rdtscll(tsc_start); + + do { + apic = apic_read(APIC_TMCCT); + rdtscll(tsc); + } while ((tsc - tsc_start) < TICK_COUNT && + (apic_start - apic) < TICK_COUNT); + + result = (apic_start - apic) * 1000L * tsc_khz / + (tsc - tsc_start); + } + printk("result %d\n", result); + + + printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n", + result / 1000 / 1000, result / 1000 % 1000); + + return result * APIC_DIVISOR / HZ; +} + +static unsigned int calibration_result; + +void __init setup_boot_APIC_clock (void) +{ + if (disable_apic_timer) { + printk(KERN_INFO "Disabling APIC timer\n"); + return; + } + + printk(KERN_INFO "Using local APIC timer interrupts.\n"); + using_apic_timer = 1; + + local_irq_disable(); + + calibration_result = calibrate_APIC_clock(); + /* + * Now set up the timer for real. + */ + setup_APIC_timer(calibration_result); + + local_irq_enable(); +} + +void __cpuinit setup_secondary_APIC_clock(void) +{ + local_irq_disable(); /* FIXME: Do we need this? --RR */ + setup_APIC_timer(calibration_result); + local_irq_enable(); +} + +void disable_APIC_timer(void) +{ + if (using_apic_timer) { + unsigned long v; + + v = apic_read(APIC_LVTT); + /* + * When an illegal vector value (0-15) is written to an LVT + * entry and delivery mode is Fixed, the APIC may signal an + * illegal vector error, with out regard to whether the mask + * bit is set or whether an interrupt is actually seen on input. + * + * Boot sequence might call this function when the LVTT has + * '0' vector value. So make sure vector field is set to + * valid value. + */ + v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, v); + } +} + +void enable_APIC_timer(void) +{ + int cpu = smp_processor_id(); + + if (using_apic_timer && + !cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { + unsigned long v; + + v = apic_read(APIC_LVTT); + apic_write(APIC_LVTT, v & ~APIC_LVT_MASKED); + } +} + +void switch_APIC_timer_to_ipi(void *cpumask) +{ + cpumask_t mask = *(cpumask_t *)cpumask; + int cpu = smp_processor_id(); + + if (cpu_isset(cpu, mask) && + !cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { + disable_APIC_timer(); + cpu_set(cpu, timer_interrupt_broadcast_ipi_mask); + } +} +EXPORT_SYMBOL(switch_APIC_timer_to_ipi); + +void smp_send_timer_broadcast_ipi(void) +{ + int cpu = smp_processor_id(); + cpumask_t mask; + + cpus_and(mask, cpu_online_map, timer_interrupt_broadcast_ipi_mask); + + if (cpu_isset(cpu, mask)) { + cpu_clear(cpu, mask); + add_pda(apic_timer_irqs, 1); + smp_local_timer_interrupt(); + } + + if (!cpus_empty(mask)) { + send_IPI_mask(mask, LOCAL_TIMER_VECTOR); + } +} + +void switch_ipi_to_APIC_timer(void *cpumask) +{ + cpumask_t mask = *(cpumask_t *)cpumask; + int cpu = smp_processor_id(); + + if (cpu_isset(cpu, mask) && + cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { + cpu_clear(cpu, timer_interrupt_broadcast_ipi_mask); + enable_APIC_timer(); + } +} +EXPORT_SYMBOL(switch_ipi_to_APIC_timer); + +int setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; +} + +void setup_APIC_extended_lvt(unsigned char lvt_off, unsigned char vector, + unsigned char msg_type, unsigned char mask) +{ + unsigned long reg = (lvt_off << 4) + K8_APIC_EXT_LVT_BASE; + unsigned int v = (mask << 16) | (msg_type << 8) | vector; + apic_write(reg, v); +} + +#undef APIC_DIVISOR + +/* + * Local timer interrupt handler. It does both profiling and + * process statistics/rescheduling. + * + * We do profiling in every local tick, statistics/rescheduling + * happen only every 'profiling multiplier' ticks. The default + * multiplier is 1 and it can be changed by writing the new multiplier + * value into /proc/profile. + */ + +void smp_local_timer_interrupt(void) +{ + profile_tick(CPU_PROFILING); +#ifdef CONFIG_SMP + update_process_times(user_mode(get_irq_regs())); +#endif + if (apic_runs_main_timer > 1 && smp_processor_id() == boot_cpu_id) + main_timer_handler(); + /* + * We take the 'long' return path, and there every subsystem + * grabs the appropriate locks (kernel lock/ irq lock). + * + * We might want to decouple profiling from the 'long path', + * and do the profiling totally in assembly. + * + * Currently this isn't too much of an issue (performance wise), + * we can take more than 100K local irqs per second on a 100 MHz P5. + */ +} + +/* + * Local APIC timer interrupt. This is the most natural way for doing + * local interrupts, but local timer interrupts can be emulated by + * broadcast interrupts too. [in case the hw doesn't support APIC timers] + * + * [ if a single-CPU system runs an SMP kernel then we call the local + * interrupt as well. Thus we cannot inline the local irq ... ] + */ +void smp_apic_timer_interrupt(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + + /* + * the NMI deadlock-detector uses this. + */ + add_pda(apic_timer_irqs, 1); + + /* + * NOTE! We'd better ACK the irq immediately, + * because timer handling can be slow. + */ + ack_APIC_irq(); + /* + * update_process_times() expects us to have done irq_enter(). + * Besides, if we don't timer interrupts ignore the global + * interrupt lock, which is the WrongThing (tm) to do. + */ + exit_idle(); + irq_enter(); + smp_local_timer_interrupt(); + irq_exit(); + set_irq_regs(old_regs); +} + +/* + * apic_is_clustered_box() -- Check if we can expect good TSC + * + * Thus far, the major user of this is IBM's Summit2 series: + * + * Clustered boxes may have unsynced TSC problems if they are + * multi-chassis. Use available data to take a good guess. + * If in doubt, go HPET. + */ +__cpuinit int apic_is_clustered_box(void) +{ + int i, clusters, zeros; + unsigned id; + DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); + + bitmap_zero(clustermap, NUM_APIC_CLUSTERS); + + for (i = 0; i < NR_CPUS; i++) { + id = bios_cpu_apicid[i]; + if (id != BAD_APICID) + __set_bit(APIC_CLUSTERID(id), clustermap); + } + + /* Problem: Partially populated chassis may not have CPUs in some of + * the APIC clusters they have been allocated. Only present CPUs have + * bios_cpu_apicid entries, thus causing zeroes in the bitmap. Since + * clusters are allocated sequentially, count zeros only if they are + * bounded by ones. + */ + clusters = 0; + zeros = 0; + for (i = 0; i < NUM_APIC_CLUSTERS; i++) { + if (test_bit(i, clustermap)) { + clusters += 1 + zeros; + zeros = 0; + } else + ++zeros; + } + + /* + * If clusters > 2, then should be multi-chassis. + * May have to revisit this when multi-core + hyperthreaded CPUs come + * out, but AFAIK this will work even for them. + */ + return (clusters > 2); +} + +/* + * This interrupt should _never_ happen with our APIC/SMP architecture + */ +asmlinkage void smp_spurious_interrupt(void) +{ + unsigned int v; + exit_idle(); + irq_enter(); + /* + * Check if this really is a spurious interrupt and ACK it + * if it is a vectored one. Just in case... + * Spurious interrupts should not be ACKed. + */ + v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1)); + if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f))) + ack_APIC_irq(); + + irq_exit(); +} + +/* + * This interrupt should never happen with our APIC/SMP architecture + */ + +asmlinkage void smp_error_interrupt(void) +{ + unsigned int v, v1; + + exit_idle(); + irq_enter(); + /* First tickle the hardware, only then report what went on. -- REW */ + v = apic_read(APIC_ESR); + apic_write(APIC_ESR, 0); + v1 = apic_read(APIC_ESR); + ack_APIC_irq(); + atomic_inc(&irq_err_count); + + /* Here is what the APIC error bits mean: + 0: Send CS error + 1: Receive CS error + 2: Send accept error + 3: Receive accept error + 4: Reserved + 5: Send illegal vector + 6: Received illegal vector + 7: Illegal register address + */ + printk (KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n", + smp_processor_id(), v , v1); + irq_exit(); +} + +int disable_apic; + +/* + * This initializes the IO-APIC and APIC hardware if this is + * a UP kernel. + */ +int __init APIC_init_uniprocessor (void) +{ + if (disable_apic) { + printk(KERN_INFO "Apic disabled\n"); + return -1; + } + if (!cpu_has_apic) { + disable_apic = 1; + printk(KERN_INFO "Apic disabled by BIOS\n"); + return -1; + } + + verify_local_APIC(); + + phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id); + apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id)); + + setup_local_APIC(); + + if (smp_found_config && !skip_ioapic_setup && nr_ioapics) + setup_IO_APIC(); + else + nr_ioapics = 0; + setup_boot_APIC_clock(); + check_nmi_watchdog(); + return 0; +} + +static __init int setup_disableapic(char *str) +{ + disable_apic = 1; + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return 0; +} +early_param("disableapic", setup_disableapic); + +/* same as disableapic, for compatibility */ +static __init int setup_nolapic(char *str) +{ + return setup_disableapic(str); +} +early_param("nolapic", setup_nolapic); + +static int __init parse_lapic_timer_c2_ok(char *arg) +{ + local_apic_timer_c2_ok = 1; + return 0; +} +early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); + +static __init int setup_noapictimer(char *str) +{ + if (str[0] != ' ' && str[0] != 0) + return 0; + disable_apic_timer = 1; + return 1; +} + +static __init int setup_apicmaintimer(char *str) +{ + apic_runs_main_timer = 1; + nohpet = 1; + return 1; +} +__setup("apicmaintimer", setup_apicmaintimer); + +static __init int setup_noapicmaintimer(char *str) +{ + apic_runs_main_timer = -1; + return 1; +} +__setup("noapicmaintimer", setup_noapicmaintimer); + +static __init int setup_apicpmtimer(char *s) +{ + apic_calibrate_pmtmr = 1; + notsc_setup(NULL); + return setup_apicmaintimer(NULL); +} +__setup("apicpmtimer", setup_apicpmtimer); + +__setup("noapictimer", setup_noapictimer); + diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c new file mode 100644 index 000000000000..32f2365c26ed --- /dev/null +++ b/arch/x86/kernel/apm_32.c @@ -0,0 +1,2403 @@ +/* -*- linux-c -*- + * APM BIOS driver for Linux + * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au) + * + * Initial development of this driver was funded by NEC Australia P/L + * and NEC Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * October 1995, Rik Faith (faith@cs.unc.edu): + * Minor enhancements and updates (to the patch set) for 1.3.x + * Documentation + * January 1996, Rik Faith (faith@cs.unc.edu): + * Make /proc/apm easy to format (bump driver version) + * March 1996, Rik Faith (faith@cs.unc.edu): + * Prohibit APM BIOS calls unless apm_enabled. + * (Thanks to Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>) + * April 1996, Stephen Rothwell (sfr@canb.auug.org.au) + * Version 1.0 and 1.1 + * May 1996, Version 1.2 + * Feb 1998, Version 1.3 + * Feb 1998, Version 1.4 + * Aug 1998, Version 1.5 + * Sep 1998, Version 1.6 + * Nov 1998, Version 1.7 + * Jan 1999, Version 1.8 + * Jan 1999, Version 1.9 + * Oct 1999, Version 1.10 + * Nov 1999, Version 1.11 + * Jan 2000, Version 1.12 + * Feb 2000, Version 1.13 + * Nov 2000, Version 1.14 + * Oct 2001, Version 1.15 + * Jan 2002, Version 1.16 + * Oct 2002, Version 1.16ac + * + * History: + * 0.6b: first version in official kernel, Linux 1.3.46 + * 0.7: changed /proc/apm format, Linux 1.3.58 + * 0.8: fixed gcc 2.7.[12] compilation problems, Linux 1.3.59 + * 0.9: only call bios if bios is present, Linux 1.3.72 + * 1.0: use fixed device number, consolidate /proc/apm into this file, + * Linux 1.3.85 + * 1.1: support user-space standby and suspend, power off after system + * halted, Linux 1.3.98 + * 1.2: When resetting RTC after resume, take care so that the time + * is only incorrect by 30-60mS (vs. 1S previously) (Gabor J. Toth + * <jtoth@princeton.edu>); improve interaction between + * screen-blanking and gpm (Stephen Rothwell); Linux 1.99.4 + * 1.2a:Simple change to stop mysterious bug reports with SMP also added + * levels to the printk calls. APM is not defined for SMP machines. + * The new replacment for it is, but Linux doesn't yet support this. + * Alan Cox Linux 2.1.55 + * 1.3: Set up a valid data descriptor 0x40 for buggy BIOS's + * 1.4: Upgraded to support APM 1.2. Integrated ThinkPad suspend patch by + * Dean Gaudet <dgaudet@arctic.org>. + * C. Scott Ananian <cananian@alumni.princeton.edu> Linux 2.1.87 + * 1.5: Fix segment register reloading (in case of bad segments saved + * across BIOS call). + * Stephen Rothwell + * 1.6: Cope with complier/assembler differences. + * Only try to turn off the first display device. + * Fix OOPS at power off with no APM BIOS by Jan Echternach + * <echter@informatik.uni-rostock.de> + * Stephen Rothwell + * 1.7: Modify driver's cached copy of the disabled/disengaged flags + * to reflect current state of APM BIOS. + * Chris Rankin <rankinc@bellsouth.net> + * Reset interrupt 0 timer to 100Hz after suspend + * Chad Miller <cmiller@surfsouth.com> + * Add CONFIG_APM_IGNORE_SUSPEND_BOUNCE + * Richard Gooch <rgooch@atnf.csiro.au> + * Allow boot time disabling of APM + * Make boot messages far less verbose by default + * Make asm safer + * Stephen Rothwell + * 1.8: Add CONFIG_APM_RTC_IS_GMT + * Richard Gooch <rgooch@atnf.csiro.au> + * change APM_NOINTS to CONFIG_APM_ALLOW_INTS + * remove dependency on CONFIG_PROC_FS + * Stephen Rothwell + * 1.9: Fix small typo. <laslo@wodip.opole.pl> + * Try to cope with BIOS's that need to have all display + * devices blanked and not just the first one. + * Ross Paterson <ross@soi.city.ac.uk> + * Fix segment limit setting it has always been wrong as + * the segments needed to have byte granularity. + * Mark a few things __init. + * Add hack to allow power off of SMP systems by popular request. + * Use CONFIG_SMP instead of __SMP__ + * Ignore BOUNCES for three seconds. + * Stephen Rothwell + * 1.10: Fix for Thinkpad return code. + * Merge 2.2 and 2.3 drivers. + * Remove APM dependencies in arch/i386/kernel/process.c + * Remove APM dependencies in drivers/char/sysrq.c + * Reset time across standby. + * Allow more inititialisation on SMP. + * Remove CONFIG_APM_POWER_OFF and make it boot time + * configurable (default on). + * Make debug only a boot time parameter (remove APM_DEBUG). + * Try to blank all devices on any error. + * 1.11: Remove APM dependencies in drivers/char/console.c + * Check nr_running to detect if we are idle (from + * Borislav Deianov <borislav@lix.polytechnique.fr>) + * Fix for bioses that don't zero the top part of the + * entrypoint offset (Mario Sitta <sitta@al.unipmn.it>) + * (reported by Panos Katsaloulis <teras@writeme.com>). + * Real mode power off patch (Walter Hofmann + * <Walter.Hofmann@physik.stud.uni-erlangen.de>). + * 1.12: Remove CONFIG_SMP as the compiler will optimize + * the code away anyway (smp_num_cpus == 1 in UP) + * noted by Artur Skawina <skawina@geocities.com>. + * Make power off under SMP work again. + * Fix thinko with initial engaging of BIOS. + * Make sure power off only happens on CPU 0 + * (Paul "Rusty" Russell <rusty@rustcorp.com.au>). + * Do error notification to user mode if BIOS calls fail. + * Move entrypoint offset fix to ...boot/setup.S + * where it belongs (Cosmos <gis88564@cis.nctu.edu.tw>). + * Remove smp-power-off. SMP users must now specify + * "apm=power-off" on the kernel command line. Suggested + * by Jim Avera <jima@hal.com>, modified by Alan Cox + * <alan@lxorguk.ukuu.org.uk>. + * Register the /proc/apm entry even on SMP so that + * scripts that check for it before doing power off + * work (Jim Avera <jima@hal.com>). + * 1.13: Changes for new pm_ interfaces (Andy Henroid + * <andy_henroid@yahoo.com>). + * Modularize the code. + * Fix the Thinkpad (again) :-( (CONFIG_APM_IGNORE_MULTIPLE_SUSPENDS + * is now the way life works). + * Fix thinko in suspend() (wrong return). + * Notify drivers on critical suspend. + * Make kapmd absorb more idle time (Pavel Machek <pavel@suse.cz> + * modified by sfr). + * Disable interrupts while we are suspended (Andy Henroid + * <andy_henroid@yahoo.com> fixed by sfr). + * Make power off work on SMP again (Tony Hoyle + * <tmh@magenta-logic.com> and <zlatko@iskon.hr>) modified by sfr. + * Remove CONFIG_APM_SUSPEND_BOUNCE. The bounce ignore + * interval is now configurable. + * 1.14: Make connection version persist across module unload/load. + * Enable and engage power management earlier. + * Disengage power management on module unload. + * Changed to use the sysrq-register hack for registering the + * power off function called by magic sysrq based upon discussions + * in irc://irc.openprojects.net/#kernelnewbies + * (Crutcher Dunnavant <crutcher+kernel@datastacks.com>). + * Make CONFIG_APM_REAL_MODE_POWER_OFF run time configurable. + * (Arjan van de Ven <arjanv@redhat.com>) modified by sfr. + * Work around byte swap bug in one of the Vaio's BIOS's + * (Marc Boucher <marc@mbsi.ca>). + * Exposed the disable flag to dmi so that we can handle known + * broken APM (Alan Cox <alan@redhat.com>). + * 1.14ac: If the BIOS says "I slowed the CPU down" then don't spin + * calling it - instead idle. (Alan Cox <alan@redhat.com>) + * If an APM idle fails log it and idle sensibly + * 1.15: Don't queue events to clients who open the device O_WRONLY. + * Don't expect replies from clients who open the device O_RDONLY. + * (Idea from Thomas Hood) + * Minor waitqueue cleanups. (John Fremlin <chief@bandits.org>) + * 1.16: Fix idle calling. (Andreas Steinmetz <ast@domdv.de> et al.) + * Notify listeners of standby or suspend events before notifying + * drivers. Return EBUSY to ioctl() if suspend is rejected. + * (Russell King <rmk@arm.linux.org.uk> and Thomas Hood) + * Ignore first resume after we generate our own resume event + * after a suspend (Thomas Hood) + * Daemonize now gets rid of our controlling terminal (sfr). + * CONFIG_APM_CPU_IDLE now just affects the default value of + * idle_threshold (sfr). + * Change name of kernel apm daemon (as it no longer idles) (sfr). + * 1.16ac: Fix up SMP support somewhat. You can now force SMP on and we + * make _all_ APM calls on the CPU#0. Fix unsafe sign bug. + * TODO: determine if its "boot CPU" or "CPU0" we want to lock to. + * + * APM 1.1 Reference: + * + * Intel Corporation, Microsoft Corporation. Advanced Power Management + * (APM) BIOS Interface Specification, Revision 1.1, September 1993. + * Intel Order Number 241704-001. Microsoft Part Number 781-110-X01. + * + * [This document is available free from Intel by calling 800.628.8686 (fax + * 916.356.6100) or 800.548.4725; or via anonymous ftp from + * ftp://ftp.intel.com/pub/IAL/software_specs/apmv11.doc. It is also + * available from Microsoft by calling 206.882.8080.] + * + * APM 1.2 Reference: + * Intel Corporation, Microsoft Corporation. Advanced Power Management + * (APM) BIOS Interface Specification, Revision 1.2, February 1996. + * + * [This document is available from Microsoft at: + * http://www.microsoft.com/whdc/archive/amp_12.mspx] + */ + +#include <linux/module.h> + +#include <linux/poll.h> +#include <linux/types.h> +#include <linux/stddef.h> +#include <linux/timer.h> +#include <linux/fcntl.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/miscdevice.h> +#include <linux/apm_bios.h> +#include <linux/init.h> +#include <linux/time.h> +#include <linux/sched.h> +#include <linux/pm.h> +#include <linux/pm_legacy.h> +#include <linux/capability.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/freezer.h> +#include <linux/smp.h> +#include <linux/dmi.h> +#include <linux/suspend.h> +#include <linux/kthread.h> + +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/desc.h> +#include <asm/i8253.h> +#include <asm/paravirt.h> +#include <asm/reboot.h> + +#include "io_ports.h" + +#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) +extern int (*console_blank_hook)(int); +#endif + +/* + * The apm_bios device is one of the misc char devices. + * This is its minor number. + */ +#define APM_MINOR_DEV 134 + +/* + * See Documentation/Config.help for the configuration options. + * + * Various options can be changed at boot time as follows: + * (We allow underscores for compatibility with the modules code) + * apm=on/off enable/disable APM + * [no-]allow[-_]ints allow interrupts during BIOS calls + * [no-]broken[-_]psr BIOS has a broken GetPowerStatus call + * [no-]realmode[-_]power[-_]off switch to real mode before + * powering off + * [no-]debug log some debugging messages + * [no-]power[-_]off power off on shutdown + * [no-]smp Use apm even on an SMP box + * bounce[-_]interval=<n> number of ticks to ignore suspend + * bounces + * idle[-_]threshold=<n> System idle percentage above which to + * make APM BIOS idle calls. Set it to + * 100 to disable. + * idle[-_]period=<n> Period (in 1/100s of a second) over + * which the idle percentage is + * calculated. + */ + +/* KNOWN PROBLEM MACHINES: + * + * U: TI 4000M TravelMate: BIOS is *NOT* APM compliant + * [Confirmed by TI representative] + * ?: ACER 486DX4/75: uses dseg 0040, in violation of APM specification + * [Confirmed by BIOS disassembly] + * [This may work now ...] + * P: Toshiba 1950S: battery life information only gets updated after resume + * P: Midwest Micro Soundbook Elite DX2/66 monochrome: screen blanking + * broken in BIOS [Reported by Garst R. Reese <reese@isn.net>] + * ?: AcerNote-950: oops on reading /proc/apm - workaround is a WIP + * Neale Banks <neale@lowendale.com.au> December 2000 + * + * Legend: U = unusable with APM patches + * P = partially usable with APM patches + */ + +/* + * Define as 1 to make the driver always call the APM BIOS busy + * routine even if the clock was not reported as slowed by the + * idle routine. Otherwise, define as 0. + */ +#define ALWAYS_CALL_BUSY 1 + +/* + * Define to make the APM BIOS calls zero all data segment registers (so + * that an incorrect BIOS implementation will cause a kernel panic if it + * tries to write to arbitrary memory). + */ +#define APM_ZERO_SEGS + +#include "apm.h" + +/* + * Define to re-initialize the interrupt 0 timer to 100 Hz after a suspend. + * This patched by Chad Miller <cmiller@surfsouth.com>, original code by + * David Chen <chen@ctpa04.mit.edu> + */ +#undef INIT_TIMER_AFTER_SUSPEND + +#ifdef INIT_TIMER_AFTER_SUSPEND +#include <linux/timex.h> +#include <asm/io.h> +#include <linux/delay.h> +#endif + +/* + * Need to poll the APM BIOS every second + */ +#define APM_CHECK_TIMEOUT (HZ) + +/* + * Ignore suspend events for this amount of time after a resume + */ +#define DEFAULT_BOUNCE_INTERVAL (3 * HZ) + +/* + * Maximum number of events stored + */ +#define APM_MAX_EVENTS 20 + +/* + * The per-file APM data + */ +struct apm_user { + int magic; + struct apm_user * next; + unsigned int suser: 1; + unsigned int writer: 1; + unsigned int reader: 1; + unsigned int suspend_wait: 1; + int suspend_result; + int suspends_pending; + int standbys_pending; + int suspends_read; + int standbys_read; + int event_head; + int event_tail; + apm_event_t events[APM_MAX_EVENTS]; +}; + +/* + * The magic number in apm_user + */ +#define APM_BIOS_MAGIC 0x4101 + +/* + * idle percentage above which bios idle calls are done + */ +#ifdef CONFIG_APM_CPU_IDLE +#define DEFAULT_IDLE_THRESHOLD 95 +#else +#define DEFAULT_IDLE_THRESHOLD 100 +#endif +#define DEFAULT_IDLE_PERIOD (100 / 3) + +/* + * Local variables + */ +static struct { + unsigned long offset; + unsigned short segment; +} apm_bios_entry; +static int clock_slowed; +static int idle_threshold __read_mostly = DEFAULT_IDLE_THRESHOLD; +static int idle_period __read_mostly = DEFAULT_IDLE_PERIOD; +static int set_pm_idle; +static int suspends_pending; +static int standbys_pending; +static int ignore_sys_suspend; +static int ignore_normal_resume; +static int bounce_interval __read_mostly = DEFAULT_BOUNCE_INTERVAL; + +static int debug __read_mostly; +static int smp __read_mostly; +static int apm_disabled = -1; +#ifdef CONFIG_SMP +static int power_off; +#else +static int power_off = 1; +#endif +#ifdef CONFIG_APM_REAL_MODE_POWER_OFF +static int realmode_power_off = 1; +#else +static int realmode_power_off; +#endif +#ifdef CONFIG_APM_ALLOW_INTS +static int allow_ints = 1; +#else +static int allow_ints; +#endif +static int broken_psr; + +static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); +static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); +static struct apm_user * user_list; +static DEFINE_SPINLOCK(user_list_lock); +static const struct desc_struct bad_bios_desc = { 0, 0x00409200 }; + +static const char driver_version[] = "1.16ac"; /* no spaces */ + +static struct task_struct *kapmd_task; + +/* + * APM event names taken from the APM 1.2 specification. These are + * the message codes that the BIOS uses to tell us about events + */ +static const char * const apm_event_name[] = { + "system standby", + "system suspend", + "normal resume", + "critical resume", + "low battery", + "power status change", + "update time", + "critical suspend", + "user standby", + "user suspend", + "system standby resume", + "capabilities change" +}; +#define NR_APM_EVENT_NAME ARRAY_SIZE(apm_event_name) + +typedef struct lookup_t { + int key; + char * msg; +} lookup_t; + +/* + * The BIOS returns a set of standard error codes in AX when the + * carry flag is set. + */ + +static const lookup_t error_table[] = { +/* N/A { APM_SUCCESS, "Operation succeeded" }, */ + { APM_DISABLED, "Power management disabled" }, + { APM_CONNECTED, "Real mode interface already connected" }, + { APM_NOT_CONNECTED, "Interface not connected" }, + { APM_16_CONNECTED, "16 bit interface already connected" }, +/* N/A { APM_16_UNSUPPORTED, "16 bit interface not supported" }, */ + { APM_32_CONNECTED, "32 bit interface already connected" }, + { APM_32_UNSUPPORTED, "32 bit interface not supported" }, + { APM_BAD_DEVICE, "Unrecognized device ID" }, + { APM_BAD_PARAM, "Parameter out of range" }, + { APM_NOT_ENGAGED, "Interface not engaged" }, + { APM_BAD_FUNCTION, "Function not supported" }, + { APM_RESUME_DISABLED, "Resume timer disabled" }, + { APM_BAD_STATE, "Unable to enter requested state" }, +/* N/A { APM_NO_EVENTS, "No events pending" }, */ + { APM_NO_ERROR, "BIOS did not set a return code" }, + { APM_NOT_PRESENT, "No APM present" } +}; +#define ERROR_COUNT ARRAY_SIZE(error_table) + +/** + * apm_error - display an APM error + * @str: information string + * @err: APM BIOS return code + * + * Write a meaningful log entry to the kernel log in the event of + * an APM error. + */ + +static void apm_error(char *str, int err) +{ + int i; + + for (i = 0; i < ERROR_COUNT; i++) + if (error_table[i].key == err) break; + if (i < ERROR_COUNT) + printk(KERN_NOTICE "apm: %s: %s\n", str, error_table[i].msg); + else + printk(KERN_NOTICE "apm: %s: unknown error code %#2.2x\n", + str, err); +} + +/* + * Lock APM functionality to physical CPU 0 + */ + +#ifdef CONFIG_SMP + +static cpumask_t apm_save_cpus(void) +{ + cpumask_t x = current->cpus_allowed; + /* Some bioses don't like being called from CPU != 0 */ + set_cpus_allowed(current, cpumask_of_cpu(0)); + BUG_ON(smp_processor_id() != 0); + return x; +} + +static inline void apm_restore_cpus(cpumask_t mask) +{ + set_cpus_allowed(current, mask); +} + +#else + +/* + * No CPU lockdown needed on a uniprocessor + */ + +#define apm_save_cpus() (current->cpus_allowed) +#define apm_restore_cpus(x) (void)(x) + +#endif + +/* + * These are the actual BIOS calls. Depending on APM_ZERO_SEGS and + * apm_info.allow_ints, we are being really paranoid here! Not only + * are interrupts disabled, but all the segment registers (except SS) + * are saved and zeroed this means that if the BIOS tries to reference + * any data without explicitly loading the segment registers, the kernel + * will fault immediately rather than have some unforeseen circumstances + * for the rest of the kernel. And it will be very obvious! :-) Doing + * this depends on CS referring to the same physical memory as DS so that + * DS can be zeroed before the call. Unfortunately, we can't do anything + * about the stack segment/pointer. Also, we tell the compiler that + * everything could change. + * + * Also, we KNOW that for the non error case of apm_bios_call, there + * is no useful data returned in the low order 8 bits of eax. + */ + +static inline unsigned long __apm_irq_save(void) +{ + unsigned long flags; + local_save_flags(flags); + if (apm_info.allow_ints) { + if (irqs_disabled_flags(flags)) + local_irq_enable(); + } else + local_irq_disable(); + + return flags; +} + +#define apm_irq_save(flags) \ + do { flags = __apm_irq_save(); } while (0) + +static inline void apm_irq_restore(unsigned long flags) +{ + if (irqs_disabled_flags(flags)) + local_irq_disable(); + else if (irqs_disabled()) + local_irq_enable(); +} + +#ifdef APM_ZERO_SEGS +# define APM_DECL_SEGS \ + unsigned int saved_fs; unsigned int saved_gs; +# define APM_DO_SAVE_SEGS \ + savesegment(fs, saved_fs); savesegment(gs, saved_gs) +# define APM_DO_RESTORE_SEGS \ + loadsegment(fs, saved_fs); loadsegment(gs, saved_gs) +#else +# define APM_DECL_SEGS +# define APM_DO_SAVE_SEGS +# define APM_DO_RESTORE_SEGS +#endif + +/** + * apm_bios_call - Make an APM BIOS 32bit call + * @func: APM function to execute + * @ebx_in: EBX register for call entry + * @ecx_in: ECX register for call entry + * @eax: EAX register return + * @ebx: EBX register return + * @ecx: ECX register return + * @edx: EDX register return + * @esi: ESI register return + * + * Make an APM call using the 32bit protected mode interface. The + * caller is responsible for knowing if APM BIOS is configured and + * enabled. This call can disable interrupts for a long period of + * time on some laptops. The return value is in AH and the carry + * flag is loaded into AL. If there is an error, then the error + * code is returned in AH (bits 8-15 of eax) and this function + * returns non-zero. + */ + +static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in, + u32 *eax, u32 *ebx, u32 *ecx, u32 *edx, u32 *esi) +{ + APM_DECL_SEGS + unsigned long flags; + cpumask_t cpus; + int cpu; + struct desc_struct save_desc_40; + struct desc_struct *gdt; + + cpus = apm_save_cpus(); + + cpu = get_cpu(); + gdt = get_cpu_gdt_table(cpu); + save_desc_40 = gdt[0x40 / 8]; + gdt[0x40 / 8] = bad_bios_desc; + + apm_irq_save(flags); + APM_DO_SAVE_SEGS; + apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi); + APM_DO_RESTORE_SEGS; + apm_irq_restore(flags); + gdt[0x40 / 8] = save_desc_40; + put_cpu(); + apm_restore_cpus(cpus); + + return *eax & 0xff; +} + +/** + * apm_bios_call_simple - make a simple APM BIOS 32bit call + * @func: APM function to invoke + * @ebx_in: EBX register value for BIOS call + * @ecx_in: ECX register value for BIOS call + * @eax: EAX register on return from the BIOS call + * + * Make a BIOS call that returns one value only, or just status. + * If there is an error, then the error code is returned in AH + * (bits 8-15 of eax) and this function returns non-zero. This is + * used for simpler BIOS operations. This call may hold interrupts + * off for a long time on some laptops. + */ + +static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax) +{ + u8 error; + APM_DECL_SEGS + unsigned long flags; + cpumask_t cpus; + int cpu; + struct desc_struct save_desc_40; + struct desc_struct *gdt; + + cpus = apm_save_cpus(); + + cpu = get_cpu(); + gdt = get_cpu_gdt_table(cpu); + save_desc_40 = gdt[0x40 / 8]; + gdt[0x40 / 8] = bad_bios_desc; + + apm_irq_save(flags); + APM_DO_SAVE_SEGS; + error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax); + APM_DO_RESTORE_SEGS; + apm_irq_restore(flags); + gdt[0x40 / 8] = save_desc_40; + put_cpu(); + apm_restore_cpus(cpus); + return error; +} + +/** + * apm_driver_version - APM driver version + * @val: loaded with the APM version on return + * + * Retrieve the APM version supported by the BIOS. This is only + * supported for APM 1.1 or higher. An error indicates APM 1.0 is + * probably present. + * + * On entry val should point to a value indicating the APM driver + * version with the high byte being the major and the low byte the + * minor number both in BCD + * + * On return it will hold the BIOS revision supported in the + * same format. + */ + +static int apm_driver_version(u_short *val) +{ + u32 eax; + + if (apm_bios_call_simple(APM_FUNC_VERSION, 0, *val, &eax)) + return (eax >> 8) & 0xff; + *val = eax; + return APM_SUCCESS; +} + +/** + * apm_get_event - get an APM event from the BIOS + * @event: pointer to the event + * @info: point to the event information + * + * The APM BIOS provides a polled information for event + * reporting. The BIOS expects to be polled at least every second + * when events are pending. When a message is found the caller should + * poll until no more messages are present. However, this causes + * problems on some laptops where a suspend event notification is + * not cleared until it is acknowledged. + * + * Additional information is returned in the info pointer, providing + * that APM 1.2 is in use. If no messges are pending the value 0x80 + * is returned (No power management events pending). + */ + +static int apm_get_event(apm_event_t *event, apm_eventinfo_t *info) +{ + u32 eax; + u32 ebx; + u32 ecx; + u32 dummy; + + if (apm_bios_call(APM_FUNC_GET_EVENT, 0, 0, &eax, &ebx, &ecx, + &dummy, &dummy)) + return (eax >> 8) & 0xff; + *event = ebx; + if (apm_info.connection_version < 0x0102) + *info = ~0; /* indicate info not valid */ + else + *info = ecx; + return APM_SUCCESS; +} + +/** + * set_power_state - set the power management state + * @what: which items to transition + * @state: state to transition to + * + * Request an APM change of state for one or more system devices. The + * processor state must be transitioned last of all. what holds the + * class of device in the upper byte and the device number (0xFF for + * all) for the object to be transitioned. + * + * The state holds the state to transition to, which may in fact + * be an acceptance of a BIOS requested state change. + */ + +static int set_power_state(u_short what, u_short state) +{ + u32 eax; + + if (apm_bios_call_simple(APM_FUNC_SET_STATE, what, state, &eax)) + return (eax >> 8) & 0xff; + return APM_SUCCESS; +} + +/** + * set_system_power_state - set system wide power state + * @state: which state to enter + * + * Transition the entire system into a new APM power state. + */ + +static int set_system_power_state(u_short state) +{ + return set_power_state(APM_DEVICE_ALL, state); +} + +/** + * apm_do_idle - perform power saving + * + * This function notifies the BIOS that the processor is (in the view + * of the OS) idle. It returns -1 in the event that the BIOS refuses + * to handle the idle request. On a success the function returns 1 + * if the BIOS did clock slowing or 0 otherwise. + */ + +static int apm_do_idle(void) +{ + u32 eax; + u8 ret = 0; + int idled = 0; + int polling; + + polling = !!(current_thread_info()->status & TS_POLLING); + if (polling) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); + } + if (!need_resched()) { + idled = 1; + ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax); + } + if (polling) + current_thread_info()->status |= TS_POLLING; + + if (!idled) + return 0; + + if (ret) { + static unsigned long t; + + /* This always fails on some SMP boards running UP kernels. + * Only report the failure the first 5 times. + */ + if (++t < 5) + { + printk(KERN_DEBUG "apm_do_idle failed (%d)\n", + (eax >> 8) & 0xff); + t = jiffies; + } + return -1; + } + clock_slowed = (apm_info.bios.flags & APM_IDLE_SLOWS_CLOCK) != 0; + return clock_slowed; +} + +/** + * apm_do_busy - inform the BIOS the CPU is busy + * + * Request that the BIOS brings the CPU back to full performance. + */ + +static void apm_do_busy(void) +{ + u32 dummy; + + if (clock_slowed || ALWAYS_CALL_BUSY) { + (void) apm_bios_call_simple(APM_FUNC_BUSY, 0, 0, &dummy); + clock_slowed = 0; + } +} + +/* + * If no process has really been interested in + * the CPU for some time, we want to call BIOS + * power management - we probably want + * to conserve power. + */ +#define IDLE_CALC_LIMIT (HZ * 100) +#define IDLE_LEAKY_MAX 16 + +static void (*original_pm_idle)(void) __read_mostly; + +/** + * apm_cpu_idle - cpu idling for APM capable Linux + * + * This is the idling function the kernel executes when APM is available. It + * tries to do BIOS powermanagement based on the average system idle time. + * Furthermore it calls the system default idle routine. + */ + +static void apm_cpu_idle(void) +{ + static int use_apm_idle; /* = 0 */ + static unsigned int last_jiffies; /* = 0 */ + static unsigned int last_stime; /* = 0 */ + + int apm_idle_done = 0; + unsigned int jiffies_since_last_check = jiffies - last_jiffies; + unsigned int bucket; + +recalc: + if (jiffies_since_last_check > IDLE_CALC_LIMIT) { + use_apm_idle = 0; + last_jiffies = jiffies; + last_stime = current->stime; + } else if (jiffies_since_last_check > idle_period) { + unsigned int idle_percentage; + + idle_percentage = current->stime - last_stime; + idle_percentage *= 100; + idle_percentage /= jiffies_since_last_check; + use_apm_idle = (idle_percentage > idle_threshold); + if (apm_info.forbid_idle) + use_apm_idle = 0; + last_jiffies = jiffies; + last_stime = current->stime; + } + + bucket = IDLE_LEAKY_MAX; + + while (!need_resched()) { + if (use_apm_idle) { + unsigned int t; + + t = jiffies; + switch (apm_do_idle()) { + case 0: apm_idle_done = 1; + if (t != jiffies) { + if (bucket) { + bucket = IDLE_LEAKY_MAX; + continue; + } + } else if (bucket) { + bucket--; + continue; + } + break; + case 1: apm_idle_done = 1; + break; + default: /* BIOS refused */ + break; + } + } + if (original_pm_idle) + original_pm_idle(); + else + default_idle(); + jiffies_since_last_check = jiffies - last_jiffies; + if (jiffies_since_last_check > idle_period) + goto recalc; + } + + if (apm_idle_done) + apm_do_busy(); +} + +/** + * apm_power_off - ask the BIOS to power off + * + * Handle the power off sequence. This is the one piece of code we + * will execute even on SMP machines. In order to deal with BIOS + * bugs we support real mode APM BIOS power off calls. We also make + * the SMP call on CPU0 as some systems will only honour this call + * on their first cpu. + */ + +static void apm_power_off(void) +{ + unsigned char po_bios_call[] = { + 0xb8, 0x00, 0x10, /* movw $0x1000,ax */ + 0x8e, 0xd0, /* movw ax,ss */ + 0xbc, 0x00, 0xf0, /* movw $0xf000,sp */ + 0xb8, 0x07, 0x53, /* movw $0x5307,ax */ + 0xbb, 0x01, 0x00, /* movw $0x0001,bx */ + 0xb9, 0x03, 0x00, /* movw $0x0003,cx */ + 0xcd, 0x15 /* int $0x15 */ + }; + + /* Some bioses don't like being called from CPU != 0 */ + if (apm_info.realmode_power_off) + { + (void)apm_save_cpus(); + machine_real_restart(po_bios_call, sizeof(po_bios_call)); + } + else + (void) set_system_power_state(APM_STATE_OFF); +} + +#ifdef CONFIG_APM_DO_ENABLE + +/** + * apm_enable_power_management - enable BIOS APM power management + * @enable: enable yes/no + * + * Enable or disable the APM BIOS power services. + */ + +static int apm_enable_power_management(int enable) +{ + u32 eax; + + if ((enable == 0) && (apm_info.bios.flags & APM_BIOS_DISENGAGED)) + return APM_NOT_ENGAGED; + if (apm_bios_call_simple(APM_FUNC_ENABLE_PM, APM_DEVICE_BALL, + enable, &eax)) + return (eax >> 8) & 0xff; + if (enable) + apm_info.bios.flags &= ~APM_BIOS_DISABLED; + else + apm_info.bios.flags |= APM_BIOS_DISABLED; + return APM_SUCCESS; +} +#endif + +/** + * apm_get_power_status - get current power state + * @status: returned status + * @bat: battery info + * @life: estimated life + * + * Obtain the current power status from the APM BIOS. We return a + * status which gives the rough battery status, and current power + * source. The bat value returned give an estimate as a percentage + * of life and a status value for the battery. The estimated life + * if reported is a lifetime in secodnds/minutes at current powwer + * consumption. + */ + +static int apm_get_power_status(u_short *status, u_short *bat, u_short *life) +{ + u32 eax; + u32 ebx; + u32 ecx; + u32 edx; + u32 dummy; + + if (apm_info.get_power_status_broken) + return APM_32_UNSUPPORTED; + if (apm_bios_call(APM_FUNC_GET_STATUS, APM_DEVICE_ALL, 0, + &eax, &ebx, &ecx, &edx, &dummy)) + return (eax >> 8) & 0xff; + *status = ebx; + *bat = ecx; + if (apm_info.get_power_status_swabinminutes) { + *life = swab16((u16)edx); + *life |= 0x8000; + } else + *life = edx; + return APM_SUCCESS; +} + +#if 0 +static int apm_get_battery_status(u_short which, u_short *status, + u_short *bat, u_short *life, u_short *nbat) +{ + u32 eax; + u32 ebx; + u32 ecx; + u32 edx; + u32 esi; + + if (apm_info.connection_version < 0x0102) { + /* pretend we only have one battery. */ + if (which != 1) + return APM_BAD_DEVICE; + *nbat = 1; + return apm_get_power_status(status, bat, life); + } + + if (apm_bios_call(APM_FUNC_GET_STATUS, (0x8000 | (which)), 0, &eax, + &ebx, &ecx, &edx, &esi)) + return (eax >> 8) & 0xff; + *status = ebx; + *bat = ecx; + *life = edx; + *nbat = esi; + return APM_SUCCESS; +} +#endif + +/** + * apm_engage_power_management - enable PM on a device + * @device: identity of device + * @enable: on/off + * + * Activate or deactive power management on either a specific device + * or the entire system (%APM_DEVICE_ALL). + */ + +static int apm_engage_power_management(u_short device, int enable) +{ + u32 eax; + + if ((enable == 0) && (device == APM_DEVICE_ALL) + && (apm_info.bios.flags & APM_BIOS_DISABLED)) + return APM_DISABLED; + if (apm_bios_call_simple(APM_FUNC_ENGAGE_PM, device, enable, &eax)) + return (eax >> 8) & 0xff; + if (device == APM_DEVICE_ALL) { + if (enable) + apm_info.bios.flags &= ~APM_BIOS_DISENGAGED; + else + apm_info.bios.flags |= APM_BIOS_DISENGAGED; + } + return APM_SUCCESS; +} + +#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) + +/** + * apm_console_blank - blank the display + * @blank: on/off + * + * Attempt to blank the console, firstly by blanking just video device + * zero, and if that fails (some BIOSes don't support it) then it blanks + * all video devices. Typically the BIOS will do laptop backlight and + * monitor powerdown for us. + */ + +static int apm_console_blank(int blank) +{ + int error = APM_NOT_ENGAGED; /* silence gcc */ + int i; + u_short state; + static const u_short dev[3] = { 0x100, 0x1FF, 0x101 }; + + state = blank ? APM_STATE_STANDBY : APM_STATE_READY; + + for (i = 0; i < ARRAY_SIZE(dev); i++) { + error = set_power_state(dev[i], state); + + if ((error == APM_SUCCESS) || (error == APM_NO_ERROR)) + return 1; + + if (error == APM_NOT_ENGAGED) + break; + } + + if (error == APM_NOT_ENGAGED) { + static int tried; + int eng_error; + if (tried++ == 0) { + eng_error = apm_engage_power_management(APM_DEVICE_ALL, 1); + if (eng_error) { + apm_error("set display", error); + apm_error("engage interface", eng_error); + return 0; + } else + return apm_console_blank(blank); + } + } + apm_error("set display", error); + return 0; +} +#endif + +static int queue_empty(struct apm_user *as) +{ + return as->event_head == as->event_tail; +} + +static apm_event_t get_queued_event(struct apm_user *as) +{ + if (++as->event_tail >= APM_MAX_EVENTS) + as->event_tail = 0; + return as->events[as->event_tail]; +} + +static void queue_event(apm_event_t event, struct apm_user *sender) +{ + struct apm_user * as; + + spin_lock(&user_list_lock); + if (user_list == NULL) + goto out; + for (as = user_list; as != NULL; as = as->next) { + if ((as == sender) || (!as->reader)) + continue; + if (++as->event_head >= APM_MAX_EVENTS) + as->event_head = 0; + + if (as->event_head == as->event_tail) { + static int notified; + + if (notified++ == 0) + printk(KERN_ERR "apm: an event queue overflowed\n"); + if (++as->event_tail >= APM_MAX_EVENTS) + as->event_tail = 0; + } + as->events[as->event_head] = event; + if ((!as->suser) || (!as->writer)) + continue; + switch (event) { + case APM_SYS_SUSPEND: + case APM_USER_SUSPEND: + as->suspends_pending++; + suspends_pending++; + break; + + case APM_SYS_STANDBY: + case APM_USER_STANDBY: + as->standbys_pending++; + standbys_pending++; + break; + } + } + wake_up_interruptible(&apm_waitqueue); +out: + spin_unlock(&user_list_lock); +} + +static void reinit_timer(void) +{ +#ifdef INIT_TIMER_AFTER_SUSPEND + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + /* set the clock to HZ */ + outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ + udelay(10); + outb_p(LATCH & 0xff, PIT_CH0); /* LSB */ + udelay(10); + outb(LATCH >> 8, PIT_CH0); /* MSB */ + udelay(10); + spin_unlock_irqrestore(&i8253_lock, flags); +#endif +} + +static int suspend(int vetoable) +{ + int err; + struct apm_user *as; + + if (pm_send_all(PM_SUSPEND, (void *)3)) { + /* Vetoed */ + if (vetoable) { + if (apm_info.connection_version > 0x100) + set_system_power_state(APM_STATE_REJECT); + err = -EBUSY; + ignore_sys_suspend = 0; + printk(KERN_WARNING "apm: suspend was vetoed.\n"); + goto out; + } + printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n"); + } + + device_suspend(PMSG_SUSPEND); + local_irq_disable(); + device_power_down(PMSG_SUSPEND); + + local_irq_enable(); + + save_processor_state(); + err = set_system_power_state(APM_STATE_SUSPEND); + ignore_normal_resume = 1; + restore_processor_state(); + + local_irq_disable(); + reinit_timer(); + + if (err == APM_NO_ERROR) + err = APM_SUCCESS; + if (err != APM_SUCCESS) + apm_error("suspend", err); + err = (err == APM_SUCCESS) ? 0 : -EIO; + device_power_up(); + local_irq_enable(); + device_resume(); + pm_send_all(PM_RESUME, (void *)0); + queue_event(APM_NORMAL_RESUME, NULL); + out: + spin_lock(&user_list_lock); + for (as = user_list; as != NULL; as = as->next) { + as->suspend_wait = 0; + as->suspend_result = err; + } + spin_unlock(&user_list_lock); + wake_up_interruptible(&apm_suspend_waitqueue); + return err; +} + +static void standby(void) +{ + int err; + + local_irq_disable(); + device_power_down(PMSG_SUSPEND); + local_irq_enable(); + + err = set_system_power_state(APM_STATE_STANDBY); + if ((err != APM_SUCCESS) && (err != APM_NO_ERROR)) + apm_error("standby", err); + + local_irq_disable(); + device_power_up(); + local_irq_enable(); +} + +static apm_event_t get_event(void) +{ + int error; + apm_event_t event = APM_NO_EVENTS; /* silence gcc */ + apm_eventinfo_t info; + + static int notified; + + /* we don't use the eventinfo */ + error = apm_get_event(&event, &info); + if (error == APM_SUCCESS) + return event; + + if ((error != APM_NO_EVENTS) && (notified++ == 0)) + apm_error("get_event", error); + + return 0; +} + +static void check_events(void) +{ + apm_event_t event; + static unsigned long last_resume; + static int ignore_bounce; + + while ((event = get_event()) != 0) { + if (debug) { + if (event <= NR_APM_EVENT_NAME) + printk(KERN_DEBUG "apm: received %s notify\n", + apm_event_name[event - 1]); + else + printk(KERN_DEBUG "apm: received unknown " + "event 0x%02x\n", event); + } + if (ignore_bounce + && ((jiffies - last_resume) > bounce_interval)) + ignore_bounce = 0; + + switch (event) { + case APM_SYS_STANDBY: + case APM_USER_STANDBY: + queue_event(event, NULL); + if (standbys_pending <= 0) + standby(); + break; + + case APM_USER_SUSPEND: +#ifdef CONFIG_APM_IGNORE_USER_SUSPEND + if (apm_info.connection_version > 0x100) + set_system_power_state(APM_STATE_REJECT); + break; +#endif + case APM_SYS_SUSPEND: + if (ignore_bounce) { + if (apm_info.connection_version > 0x100) + set_system_power_state(APM_STATE_REJECT); + break; + } + /* + * If we are already processing a SUSPEND, + * then further SUSPEND events from the BIOS + * will be ignored. We also return here to + * cope with the fact that the Thinkpads keep + * sending a SUSPEND event until something else + * happens! + */ + if (ignore_sys_suspend) + return; + ignore_sys_suspend = 1; + queue_event(event, NULL); + if (suspends_pending <= 0) + (void) suspend(1); + break; + + case APM_NORMAL_RESUME: + case APM_CRITICAL_RESUME: + case APM_STANDBY_RESUME: + ignore_sys_suspend = 0; + last_resume = jiffies; + ignore_bounce = 1; + if ((event != APM_NORMAL_RESUME) + || (ignore_normal_resume == 0)) { + device_resume(); + pm_send_all(PM_RESUME, (void *)0); + queue_event(event, NULL); + } + ignore_normal_resume = 0; + break; + + case APM_CAPABILITY_CHANGE: + case APM_LOW_BATTERY: + case APM_POWER_STATUS_CHANGE: + queue_event(event, NULL); + /* If needed, notify drivers here */ + break; + + case APM_UPDATE_TIME: + break; + + case APM_CRITICAL_SUSPEND: + /* + * We are not allowed to reject a critical suspend. + */ + (void) suspend(0); + break; + } + } +} + +static void apm_event_handler(void) +{ + static int pending_count = 4; + int err; + + if ((standbys_pending > 0) || (suspends_pending > 0)) { + if ((apm_info.connection_version > 0x100) && + (pending_count-- <= 0)) { + pending_count = 4; + if (debug) + printk(KERN_DEBUG "apm: setting state busy\n"); + err = set_system_power_state(APM_STATE_BUSY); + if (err) + apm_error("busy", err); + } + } else + pending_count = 4; + check_events(); +} + +/* + * This is the APM thread main loop. + */ + +static void apm_mainloop(void) +{ + DECLARE_WAITQUEUE(wait, current); + + add_wait_queue(&apm_waitqueue, &wait); + set_current_state(TASK_INTERRUPTIBLE); + for (;;) { + schedule_timeout(APM_CHECK_TIMEOUT); + if (kthread_should_stop()) + break; + /* + * Ok, check all events, check for idle (and mark us sleeping + * so as not to count towards the load average).. + */ + set_current_state(TASK_INTERRUPTIBLE); + apm_event_handler(); + } + remove_wait_queue(&apm_waitqueue, &wait); +} + +static int check_apm_user(struct apm_user *as, const char *func) +{ + if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) { + printk(KERN_ERR "apm: %s passed bad filp\n", func); + return 1; + } + return 0; +} + +static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos) +{ + struct apm_user * as; + int i; + apm_event_t event; + + as = fp->private_data; + if (check_apm_user(as, "read")) + return -EIO; + if ((int)count < sizeof(apm_event_t)) + return -EINVAL; + if ((queue_empty(as)) && (fp->f_flags & O_NONBLOCK)) + return -EAGAIN; + wait_event_interruptible(apm_waitqueue, !queue_empty(as)); + i = count; + while ((i >= sizeof(event)) && !queue_empty(as)) { + event = get_queued_event(as); + if (copy_to_user(buf, &event, sizeof(event))) { + if (i < count) + break; + return -EFAULT; + } + switch (event) { + case APM_SYS_SUSPEND: + case APM_USER_SUSPEND: + as->suspends_read++; + break; + + case APM_SYS_STANDBY: + case APM_USER_STANDBY: + as->standbys_read++; + break; + } + buf += sizeof(event); + i -= sizeof(event); + } + if (i < count) + return count - i; + if (signal_pending(current)) + return -ERESTARTSYS; + return 0; +} + +static unsigned int do_poll(struct file *fp, poll_table * wait) +{ + struct apm_user * as; + + as = fp->private_data; + if (check_apm_user(as, "poll")) + return 0; + poll_wait(fp, &apm_waitqueue, wait); + if (!queue_empty(as)) + return POLLIN | POLLRDNORM; + return 0; +} + +static int do_ioctl(struct inode * inode, struct file *filp, + u_int cmd, u_long arg) +{ + struct apm_user * as; + + as = filp->private_data; + if (check_apm_user(as, "ioctl")) + return -EIO; + if ((!as->suser) || (!as->writer)) + return -EPERM; + switch (cmd) { + case APM_IOC_STANDBY: + if (as->standbys_read > 0) { + as->standbys_read--; + as->standbys_pending--; + standbys_pending--; + } else + queue_event(APM_USER_STANDBY, as); + if (standbys_pending <= 0) + standby(); + break; + case APM_IOC_SUSPEND: + if (as->suspends_read > 0) { + as->suspends_read--; + as->suspends_pending--; + suspends_pending--; + } else + queue_event(APM_USER_SUSPEND, as); + if (suspends_pending <= 0) { + return suspend(1); + } else { + as->suspend_wait = 1; + wait_event_interruptible(apm_suspend_waitqueue, + as->suspend_wait == 0); + return as->suspend_result; + } + break; + default: + return -EINVAL; + } + return 0; +} + +static int do_release(struct inode * inode, struct file * filp) +{ + struct apm_user * as; + + as = filp->private_data; + if (check_apm_user(as, "release")) + return 0; + filp->private_data = NULL; + if (as->standbys_pending > 0) { + standbys_pending -= as->standbys_pending; + if (standbys_pending <= 0) + standby(); + } + if (as->suspends_pending > 0) { + suspends_pending -= as->suspends_pending; + if (suspends_pending <= 0) + (void) suspend(1); + } + spin_lock(&user_list_lock); + if (user_list == as) + user_list = as->next; + else { + struct apm_user * as1; + + for (as1 = user_list; + (as1 != NULL) && (as1->next != as); + as1 = as1->next) + ; + if (as1 == NULL) + printk(KERN_ERR "apm: filp not in user list\n"); + else + as1->next = as->next; + } + spin_unlock(&user_list_lock); + kfree(as); + return 0; +} + +static int do_open(struct inode * inode, struct file * filp) +{ + struct apm_user * as; + + as = kmalloc(sizeof(*as), GFP_KERNEL); + if (as == NULL) { + printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n", + sizeof(*as)); + return -ENOMEM; + } + as->magic = APM_BIOS_MAGIC; + as->event_tail = as->event_head = 0; + as->suspends_pending = as->standbys_pending = 0; + as->suspends_read = as->standbys_read = 0; + /* + * XXX - this is a tiny bit broken, when we consider BSD + * process accounting. If the device is opened by root, we + * instantly flag that we used superuser privs. Who knows, + * we might close the device immediately without doing a + * privileged operation -- cevans + */ + as->suser = capable(CAP_SYS_ADMIN); + as->writer = (filp->f_mode & FMODE_WRITE) == FMODE_WRITE; + as->reader = (filp->f_mode & FMODE_READ) == FMODE_READ; + spin_lock(&user_list_lock); + as->next = user_list; + user_list = as; + spin_unlock(&user_list_lock); + filp->private_data = as; + return 0; +} + +static int proc_apm_show(struct seq_file *m, void *v) +{ + unsigned short bx; + unsigned short cx; + unsigned short dx; + int error; + unsigned short ac_line_status = 0xff; + unsigned short battery_status = 0xff; + unsigned short battery_flag = 0xff; + int percentage = -1; + int time_units = -1; + char *units = "?"; + + if ((num_online_cpus() == 1) && + !(error = apm_get_power_status(&bx, &cx, &dx))) { + ac_line_status = (bx >> 8) & 0xff; + battery_status = bx & 0xff; + if ((cx & 0xff) != 0xff) + percentage = cx & 0xff; + + if (apm_info.connection_version > 0x100) { + battery_flag = (cx >> 8) & 0xff; + if (dx != 0xffff) { + units = (dx & 0x8000) ? "min" : "sec"; + time_units = dx & 0x7fff; + } + } + } + /* Arguments, with symbols from linux/apm_bios.h. Information is + from the Get Power Status (0x0a) call unless otherwise noted. + + 0) Linux driver version (this will change if format changes) + 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. + 2) APM flags from APM Installation Check (0x00): + bit 0: APM_16_BIT_SUPPORT + bit 1: APM_32_BIT_SUPPORT + bit 2: APM_IDLE_SLOWS_CLOCK + bit 3: APM_BIOS_DISABLED + bit 4: APM_BIOS_DISENGAGED + 3) AC line status + 0x00: Off-line + 0x01: On-line + 0x02: On backup power (BIOS >= 1.1 only) + 0xff: Unknown + 4) Battery status + 0x00: High + 0x01: Low + 0x02: Critical + 0x03: Charging + 0x04: Selected battery not present (BIOS >= 1.2 only) + 0xff: Unknown + 5) Battery flag + bit 0: High + bit 1: Low + bit 2: Critical + bit 3: Charging + bit 7: No system battery + 0xff: Unknown + 6) Remaining battery life (percentage of charge): + 0-100: valid + -1: Unknown + 7) Remaining battery life (time units): + Number of remaining minutes or seconds + -1: Unknown + 8) min = minutes; sec = seconds */ + + seq_printf(m, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", + driver_version, + (apm_info.bios.version >> 8) & 0xff, + apm_info.bios.version & 0xff, + apm_info.bios.flags, + ac_line_status, + battery_status, + battery_flag, + percentage, + time_units, + units); + return 0; +} + +static int proc_apm_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_apm_show, NULL); +} + +static const struct file_operations apm_file_ops = { + .owner = THIS_MODULE, + .open = proc_apm_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int apm(void *unused) +{ + unsigned short bx; + unsigned short cx; + unsigned short dx; + int error; + char * power_stat; + char * bat_stat; + +#ifdef CONFIG_SMP + /* 2002/08/01 - WT + * This is to avoid random crashes at boot time during initialization + * on SMP systems in case of "apm=power-off" mode. Seen on ASUS A7M266D. + * Some bioses don't like being called from CPU != 0. + * Method suggested by Ingo Molnar. + */ + set_cpus_allowed(current, cpumask_of_cpu(0)); + BUG_ON(smp_processor_id() != 0); +#endif + + if (apm_info.connection_version == 0) { + apm_info.connection_version = apm_info.bios.version; + if (apm_info.connection_version > 0x100) { + /* + * We only support BIOSs up to version 1.2 + */ + if (apm_info.connection_version > 0x0102) + apm_info.connection_version = 0x0102; + error = apm_driver_version(&apm_info.connection_version); + if (error != APM_SUCCESS) { + apm_error("driver version", error); + /* Fall back to an APM 1.0 connection. */ + apm_info.connection_version = 0x100; + } + } + } + + if (debug) + printk(KERN_INFO "apm: Connection version %d.%d\n", + (apm_info.connection_version >> 8) & 0xff, + apm_info.connection_version & 0xff); + +#ifdef CONFIG_APM_DO_ENABLE + if (apm_info.bios.flags & APM_BIOS_DISABLED) { + /* + * This call causes my NEC UltraLite Versa 33/C to hang if it + * is booted with PM disabled but not in the docking station. + * Unfortunate ... + */ + error = apm_enable_power_management(1); + if (error) { + apm_error("enable power management", error); + return -1; + } + } +#endif + + if ((apm_info.bios.flags & APM_BIOS_DISENGAGED) + && (apm_info.connection_version > 0x0100)) { + error = apm_engage_power_management(APM_DEVICE_ALL, 1); + if (error) { + apm_error("engage power management", error); + return -1; + } + } + + if (debug && (num_online_cpus() == 1 || smp )) { + error = apm_get_power_status(&bx, &cx, &dx); + if (error) + printk(KERN_INFO "apm: power status not available\n"); + else { + switch ((bx >> 8) & 0xff) { + case 0: power_stat = "off line"; break; + case 1: power_stat = "on line"; break; + case 2: power_stat = "on backup power"; break; + default: power_stat = "unknown"; break; + } + switch (bx & 0xff) { + case 0: bat_stat = "high"; break; + case 1: bat_stat = "low"; break; + case 2: bat_stat = "critical"; break; + case 3: bat_stat = "charging"; break; + default: bat_stat = "unknown"; break; + } + printk(KERN_INFO + "apm: AC %s, battery status %s, battery life ", + power_stat, bat_stat); + if ((cx & 0xff) == 0xff) + printk("unknown\n"); + else + printk("%d%%\n", cx & 0xff); + if (apm_info.connection_version > 0x100) { + printk(KERN_INFO + "apm: battery flag 0x%02x, battery life ", + (cx >> 8) & 0xff); + if (dx == 0xffff) + printk("unknown\n"); + else + printk("%d %s\n", dx & 0x7fff, + (dx & 0x8000) ? + "minutes" : "seconds"); + } + } + } + + /* Install our power off handler.. */ + if (power_off) + pm_power_off = apm_power_off; + + if (num_online_cpus() == 1 || smp) { +#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) + console_blank_hook = apm_console_blank; +#endif + apm_mainloop(); +#if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) + console_blank_hook = NULL; +#endif + } + + return 0; +} + +#ifndef MODULE +static int __init apm_setup(char *str) +{ + int invert; + + while ((str != NULL) && (*str != '\0')) { + if (strncmp(str, "off", 3) == 0) + apm_disabled = 1; + if (strncmp(str, "on", 2) == 0) + apm_disabled = 0; + if ((strncmp(str, "bounce-interval=", 16) == 0) || + (strncmp(str, "bounce_interval=", 16) == 0)) + bounce_interval = simple_strtol(str + 16, NULL, 0); + if ((strncmp(str, "idle-threshold=", 15) == 0) || + (strncmp(str, "idle_threshold=", 15) == 0)) + idle_threshold = simple_strtol(str + 15, NULL, 0); + if ((strncmp(str, "idle-period=", 12) == 0) || + (strncmp(str, "idle_period=", 12) == 0)) + idle_period = simple_strtol(str + 12, NULL, 0); + invert = (strncmp(str, "no-", 3) == 0) || + (strncmp(str, "no_", 3) == 0); + if (invert) + str += 3; + if (strncmp(str, "debug", 5) == 0) + debug = !invert; + if ((strncmp(str, "power-off", 9) == 0) || + (strncmp(str, "power_off", 9) == 0)) + power_off = !invert; + if (strncmp(str, "smp", 3) == 0) + { + smp = !invert; + idle_threshold = 100; + } + if ((strncmp(str, "allow-ints", 10) == 0) || + (strncmp(str, "allow_ints", 10) == 0)) + apm_info.allow_ints = !invert; + if ((strncmp(str, "broken-psr", 10) == 0) || + (strncmp(str, "broken_psr", 10) == 0)) + apm_info.get_power_status_broken = !invert; + if ((strncmp(str, "realmode-power-off", 18) == 0) || + (strncmp(str, "realmode_power_off", 18) == 0)) + apm_info.realmode_power_off = !invert; + str = strchr(str, ','); + if (str != NULL) + str += strspn(str, ", \t"); + } + return 1; +} + +__setup("apm=", apm_setup); +#endif + +static const struct file_operations apm_bios_fops = { + .owner = THIS_MODULE, + .read = do_read, + .poll = do_poll, + .ioctl = do_ioctl, + .open = do_open, + .release = do_release, +}; + +static struct miscdevice apm_device = { + APM_MINOR_DEV, + "apm_bios", + &apm_bios_fops +}; + + +/* Simple "print if true" callback */ +static int __init print_if_true(const struct dmi_system_id *d) +{ + printk("%s\n", d->ident); + return 0; +} + +/* + * Some Bioses enable the PS/2 mouse (touchpad) at resume, even if it was + * disabled before the suspend. Linux used to get terribly confused by that. + */ +static int __init broken_ps2_resume(const struct dmi_system_id *d) +{ + printk(KERN_INFO "%s machine detected. Mousepad Resume Bug workaround hopefully not needed.\n", d->ident); + return 0; +} + +/* Some bioses have a broken protected mode poweroff and need to use realmode */ +static int __init set_realmode_power_off(const struct dmi_system_id *d) +{ + if (apm_info.realmode_power_off == 0) { + apm_info.realmode_power_off = 1; + printk(KERN_INFO "%s bios detected. Using realmode poweroff only.\n", d->ident); + } + return 0; +} + +/* Some laptops require interrupts to be enabled during APM calls */ +static int __init set_apm_ints(const struct dmi_system_id *d) +{ + if (apm_info.allow_ints == 0) { + apm_info.allow_ints = 1; + printk(KERN_INFO "%s machine detected. Enabling interrupts during APM calls.\n", d->ident); + } + return 0; +} + +/* Some APM bioses corrupt memory or just plain do not work */ +static int __init apm_is_horked(const struct dmi_system_id *d) +{ + if (apm_info.disabled == 0) { + apm_info.disabled = 1; + printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident); + } + return 0; +} + +static int __init apm_is_horked_d850md(const struct dmi_system_id *d) +{ + if (apm_info.disabled == 0) { + apm_info.disabled = 1; + printk(KERN_INFO "%s machine detected. Disabling APM.\n", d->ident); + printk(KERN_INFO "This bug is fixed in bios P15 which is available for \n"); + printk(KERN_INFO "download from support.intel.com \n"); + } + return 0; +} + +/* Some APM bioses hang on APM idle calls */ +static int __init apm_likes_to_melt(const struct dmi_system_id *d) +{ + if (apm_info.forbid_idle == 0) { + apm_info.forbid_idle = 1; + printk(KERN_INFO "%s machine detected. Disabling APM idle calls.\n", d->ident); + } + return 0; +} + +/* + * Check for clue free BIOS implementations who use + * the following QA technique + * + * [ Write BIOS Code ]<------ + * | ^ + * < Does it Compile >----N-- + * |Y ^ + * < Does it Boot Win98 >-N-- + * |Y + * [Ship It] + * + * Phoenix A04 08/24/2000 is known bad (Dell Inspiron 5000e) + * Phoenix A07 09/29/2000 is known good (Dell Inspiron 5000) + */ +static int __init broken_apm_power(const struct dmi_system_id *d) +{ + apm_info.get_power_status_broken = 1; + printk(KERN_WARNING "BIOS strings suggest APM bugs, disabling power status reporting.\n"); + return 0; +} + +/* + * This bios swaps the APM minute reporting bytes over (Many sony laptops + * have this problem). + */ +static int __init swab_apm_power_in_minutes(const struct dmi_system_id *d) +{ + apm_info.get_power_status_swabinminutes = 1; + printk(KERN_WARNING "BIOS strings suggest APM reports battery life in minutes and wrong byte order.\n"); + return 0; +} + +static struct dmi_system_id __initdata apm_dmi_table[] = { + { + print_if_true, + KERN_WARNING "IBM T23 - BIOS 1.03b+ and controller firmware 1.02+ may be needed for Linux APM.", + { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), + DMI_MATCH(DMI_BIOS_VERSION, "1AET38WW (1.01b)"), }, + }, + { /* Handle problems with APM on the C600 */ + broken_ps2_resume, "Dell Latitude C600", + { DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C600"), }, + }, + { /* Allow interrupts during suspend on Dell Latitude laptops*/ + set_apm_ints, "Dell Latitude", + { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude C510"), } + }, + { /* APM crashes */ + apm_is_horked, "Dell Inspiron 2500", + { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"), + DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION,"A11"), }, + }, + { /* Allow interrupts during suspend on Dell Inspiron laptops*/ + set_apm_ints, "Dell Inspiron", { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 4000"), }, + }, + { /* Handle problems with APM on Inspiron 5000e */ + broken_apm_power, "Dell Inspiron 5000e", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "A04"), + DMI_MATCH(DMI_BIOS_DATE, "08/24/2000"), }, + }, + { /* Handle problems with APM on Inspiron 2500 */ + broken_apm_power, "Dell Inspiron 2500", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "A12"), + DMI_MATCH(DMI_BIOS_DATE, "02/04/2002"), }, + }, + { /* APM crashes */ + apm_is_horked, "Dell Dimension 4100", + { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), + DMI_MATCH(DMI_BIOS_VENDOR,"Intel Corp."), + DMI_MATCH(DMI_BIOS_VERSION,"A11"), }, + }, + { /* Allow interrupts during suspend on Compaq Laptops*/ + set_apm_ints, "Compaq 12XL125", + { DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "Compaq PC"), + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION,"4.06"), }, + }, + { /* Allow interrupts during APM or the clock goes slow */ + set_apm_ints, "ASUSTeK", + { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "L8400K series Notebook PC"), }, + }, + { /* APM blows on shutdown */ + apm_is_horked, "ABIT KX7-333[R]", + { DMI_MATCH(DMI_BOARD_VENDOR, "ABIT"), + DMI_MATCH(DMI_BOARD_NAME, "VT8367-8233A (KX7-333[R])"), }, + }, + { /* APM crashes */ + apm_is_horked, "Trigem Delhi3", + { DMI_MATCH(DMI_SYS_VENDOR, "TriGem Computer, Inc"), + DMI_MATCH(DMI_PRODUCT_NAME, "Delhi3"), }, + }, + { /* APM crashes */ + apm_is_horked, "Fujitsu-Siemens", + { DMI_MATCH(DMI_BIOS_VENDOR, "hoenix/FUJITSU SIEMENS"), + DMI_MATCH(DMI_BIOS_VERSION, "Version1.01"), }, + }, + { /* APM crashes */ + apm_is_horked_d850md, "Intel D850MD", + { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), + DMI_MATCH(DMI_BIOS_VERSION, "MV85010A.86A.0016.P07.0201251536"), }, + }, + { /* APM crashes */ + apm_is_horked, "Intel D810EMO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), + DMI_MATCH(DMI_BIOS_VERSION, "MO81010A.86A.0008.P04.0004170800"), }, + }, + { /* APM crashes */ + apm_is_horked, "Dell XPS-Z", + { DMI_MATCH(DMI_BIOS_VENDOR, "Intel Corp."), + DMI_MATCH(DMI_BIOS_VERSION, "A11"), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS-Z"), }, + }, + { /* APM crashes */ + apm_is_horked, "Sharp PC-PJ/AX", + { DMI_MATCH(DMI_SYS_VENDOR, "SHARP"), + DMI_MATCH(DMI_PRODUCT_NAME, "PC-PJ/AX"), + DMI_MATCH(DMI_BIOS_VENDOR,"SystemSoft"), + DMI_MATCH(DMI_BIOS_VERSION,"Version R2.08"), }, + }, + { /* APM crashes */ + apm_is_horked, "Dell Inspiron 2500", + { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 2500"), + DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION,"A11"), }, + }, + { /* APM idle hangs */ + apm_likes_to_melt, "Jabil AMD", + { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + DMI_MATCH(DMI_BIOS_VERSION, "0AASNP06"), }, + }, + { /* APM idle hangs */ + apm_likes_to_melt, "AMI Bios", + { DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + DMI_MATCH(DMI_BIOS_VERSION, "0AASNP05"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-N505X(DE) */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "R0206H"), + DMI_MATCH(DMI_BIOS_DATE, "08/23/99"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-N505VX */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "W2K06H0"), + DMI_MATCH(DMI_BIOS_DATE, "02/03/00"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-XG29 */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "R0117A0"), + DMI_MATCH(DMI_BIOS_DATE, "04/25/00"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-Z600NE */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "R0121Z1"), + DMI_MATCH(DMI_BIOS_DATE, "05/11/00"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-Z600NE */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "WME01Z1"), + DMI_MATCH(DMI_BIOS_DATE, "08/11/00"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-Z600LEK(DE) */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "R0206Z3"), + DMI_MATCH(DMI_BIOS_DATE, "12/25/00"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-Z505LS */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "R0203D0"), + DMI_MATCH(DMI_BIOS_DATE, "05/12/00"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-Z505LS */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "R0203Z3"), + DMI_MATCH(DMI_BIOS_DATE, "08/25/00"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-Z505LS (with updated BIOS) */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "R0209Z3"), + DMI_MATCH(DMI_BIOS_DATE, "05/12/01"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-F104K */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "R0204K2"), + DMI_MATCH(DMI_BIOS_DATE, "08/28/00"), }, + }, + + { /* Handle problems with APM on Sony Vaio PCG-C1VN/C1VE */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "R0208P1"), + DMI_MATCH(DMI_BIOS_DATE, "11/09/00"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-C1VE */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "R0204P1"), + DMI_MATCH(DMI_BIOS_DATE, "09/12/00"), }, + }, + { /* Handle problems with APM on Sony Vaio PCG-C1VE */ + swab_apm_power_in_minutes, "Sony VAIO", + { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "WXPO1Z3"), + DMI_MATCH(DMI_BIOS_DATE, "10/26/01"), }, + }, + { /* broken PM poweroff bios */ + set_realmode_power_off, "Award Software v4.60 PGMA", + { DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."), + DMI_MATCH(DMI_BIOS_VERSION, "4.60 PGMA"), + DMI_MATCH(DMI_BIOS_DATE, "134526184"), }, + }, + + /* Generic per vendor APM settings */ + + { /* Allow interrupts during suspend on IBM laptops */ + set_apm_ints, "IBM", + { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, + }, + + { } +}; + +/* + * Just start the APM thread. We do NOT want to do APM BIOS + * calls from anything but the APM thread, if for no other reason + * than the fact that we don't trust the APM BIOS. This way, + * most common APM BIOS problems that lead to protection errors + * etc will have at least some level of being contained... + * + * In short, if something bad happens, at least we have a choice + * of just killing the apm thread.. + */ +static int __init apm_init(void) +{ + struct proc_dir_entry *apm_proc; + struct desc_struct *gdt; + int err; + + dmi_check_system(apm_dmi_table); + + if (apm_info.bios.version == 0 || paravirt_enabled()) { + printk(KERN_INFO "apm: BIOS not found.\n"); + return -ENODEV; + } + printk(KERN_INFO + "apm: BIOS version %d.%d Flags 0x%02x (Driver version %s)\n", + ((apm_info.bios.version >> 8) & 0xff), + (apm_info.bios.version & 0xff), + apm_info.bios.flags, + driver_version); + if ((apm_info.bios.flags & APM_32_BIT_SUPPORT) == 0) { + printk(KERN_INFO "apm: no 32 bit BIOS support\n"); + return -ENODEV; + } + + if (allow_ints) + apm_info.allow_ints = 1; + if (broken_psr) + apm_info.get_power_status_broken = 1; + if (realmode_power_off) + apm_info.realmode_power_off = 1; + /* User can override, but default is to trust DMI */ + if (apm_disabled != -1) + apm_info.disabled = apm_disabled; + + /* + * Fix for the Compaq Contura 3/25c which reports BIOS version 0.1 + * but is reportedly a 1.0 BIOS. + */ + if (apm_info.bios.version == 0x001) + apm_info.bios.version = 0x100; + + /* BIOS < 1.2 doesn't set cseg_16_len */ + if (apm_info.bios.version < 0x102) + apm_info.bios.cseg_16_len = 0; /* 64k */ + + if (debug) { + printk(KERN_INFO "apm: entry %x:%x cseg16 %x dseg %x", + apm_info.bios.cseg, apm_info.bios.offset, + apm_info.bios.cseg_16, apm_info.bios.dseg); + if (apm_info.bios.version > 0x100) + printk(" cseg len %x, dseg len %x", + apm_info.bios.cseg_len, + apm_info.bios.dseg_len); + if (apm_info.bios.version > 0x101) + printk(" cseg16 len %x", apm_info.bios.cseg_16_len); + printk("\n"); + } + + if (apm_info.disabled) { + printk(KERN_NOTICE "apm: disabled on user request.\n"); + return -ENODEV; + } + if ((num_online_cpus() > 1) && !power_off && !smp) { + printk(KERN_NOTICE "apm: disabled - APM is not SMP safe.\n"); + apm_info.disabled = 1; + return -ENODEV; + } + if (PM_IS_ACTIVE()) { + printk(KERN_NOTICE "apm: overridden by ACPI.\n"); + apm_info.disabled = 1; + return -ENODEV; + } +#ifdef CONFIG_PM_LEGACY + pm_active = 1; +#endif + + /* + * Set up a segment that references the real mode segment 0x40 + * that extends up to the end of page zero (that we have reserved). + * This is for buggy BIOS's that refer to (real mode) segment 0x40 + * even though they are called in protected mode. + */ + set_base(bad_bios_desc, __va((unsigned long)0x40 << 4)); + _set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4)); + + /* + * Set up the long jump entry point to the APM BIOS, which is called + * from inline assembly. + */ + apm_bios_entry.offset = apm_info.bios.offset; + apm_bios_entry.segment = APM_CS; + + /* + * The APM 1.1 BIOS is supposed to provide limit information that it + * recognizes. Many machines do this correctly, but many others do + * not restrict themselves to their claimed limit. When this happens, + * they will cause a segmentation violation in the kernel at boot time. + * Most BIOS's, however, will respect a 64k limit, so we use that. + * + * Note we only set APM segments on CPU zero, since we pin the APM + * code to that CPU. + */ + gdt = get_cpu_gdt_table(0); + set_base(gdt[APM_CS >> 3], + __va((unsigned long)apm_info.bios.cseg << 4)); + set_base(gdt[APM_CS_16 >> 3], + __va((unsigned long)apm_info.bios.cseg_16 << 4)); + set_base(gdt[APM_DS >> 3], + __va((unsigned long)apm_info.bios.dseg << 4)); + + apm_proc = create_proc_entry("apm", 0, NULL); + if (apm_proc) + apm_proc->proc_fops = &apm_file_ops; + + kapmd_task = kthread_create(apm, NULL, "kapmd"); + if (IS_ERR(kapmd_task)) { + printk(KERN_ERR "apm: disabled - Unable to start kernel " + "thread.\n"); + err = PTR_ERR(kapmd_task); + kapmd_task = NULL; + remove_proc_entry("apm", NULL); + return err; + } + wake_up_process(kapmd_task); + + if (num_online_cpus() > 1 && !smp ) { + printk(KERN_NOTICE + "apm: disabled - APM is not SMP safe (power off active).\n"); + return 0; + } + + /* + * Note we don't actually care if the misc_device cannot be registered. + * this driver can do its job without it, even if userspace can't + * control it. just log the error + */ + if (misc_register(&apm_device)) + printk(KERN_WARNING "apm: Could not register misc device.\n"); + + if (HZ != 100) + idle_period = (idle_period * HZ) / 100; + if (idle_threshold < 100) { + original_pm_idle = pm_idle; + pm_idle = apm_cpu_idle; + set_pm_idle = 1; + } + + return 0; +} + +static void __exit apm_exit(void) +{ + int error; + + if (set_pm_idle) { + pm_idle = original_pm_idle; + /* + * We are about to unload the current idle thread pm callback + * (pm_idle), Wait for all processors to update cached/local + * copies of pm_idle before proceeding. + */ + cpu_idle_wait(); + } + if (((apm_info.bios.flags & APM_BIOS_DISENGAGED) == 0) + && (apm_info.connection_version > 0x0100)) { + error = apm_engage_power_management(APM_DEVICE_ALL, 0); + if (error) + apm_error("disengage power management", error); + } + misc_deregister(&apm_device); + remove_proc_entry("apm", NULL); + if (power_off) + pm_power_off = NULL; + if (kapmd_task) { + kthread_stop(kapmd_task); + kapmd_task = NULL; + } +#ifdef CONFIG_PM_LEGACY + pm_active = 0; +#endif +} + +module_init(apm_init); +module_exit(apm_exit); + +MODULE_AUTHOR("Stephen Rothwell"); +MODULE_DESCRIPTION("Advanced Power Management"); +MODULE_LICENSE("GPL"); +module_param(debug, bool, 0644); +MODULE_PARM_DESC(debug, "Enable debug mode"); +module_param(power_off, bool, 0444); +MODULE_PARM_DESC(power_off, "Enable power off"); +module_param(bounce_interval, int, 0444); +MODULE_PARM_DESC(bounce_interval, + "Set the number of ticks to ignore suspend bounces"); +module_param(allow_ints, bool, 0444); +MODULE_PARM_DESC(allow_ints, "Allow interrupts during BIOS calls"); +module_param(broken_psr, bool, 0444); +MODULE_PARM_DESC(broken_psr, "BIOS has a broken GetPowerStatus call"); +module_param(realmode_power_off, bool, 0444); +MODULE_PARM_DESC(realmode_power_off, + "Switch to real mode before powering off"); +module_param(idle_threshold, int, 0444); +MODULE_PARM_DESC(idle_threshold, + "System idle percentage above which to make APM BIOS idle calls"); +module_param(idle_period, int, 0444); +MODULE_PARM_DESC(idle_period, + "Period (in sec/100) over which to caculate the idle percentage"); +module_param(smp, bool, 0444); +MODULE_PARM_DESC(smp, + "Set this to enable APM use on an SMP platform. Use with caution on older systems"); +MODULE_ALIAS_MISCDEV(APM_MINOR_DEV); diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c new file mode 100644 index 000000000000..cfa82c899f47 --- /dev/null +++ b/arch/x86/kernel/asm-offsets.c @@ -0,0 +1,5 @@ +#ifdef CONFIG_X86_32 +# include "asm-offsets_32.c" +#else +# include "asm-offsets_64.c" +#endif diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c new file mode 100644 index 000000000000..8029742c0fc1 --- /dev/null +++ b/arch/x86/kernel/asm-offsets_32.c @@ -0,0 +1,147 @@ +/* + * Generate definitions needed by assembly language modules. + * This code generates raw asm output which is post-processed + * to extract and format the required data. + */ + +#include <linux/crypto.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/personality.h> +#include <linux/suspend.h> +#include <asm/ucontext.h> +#include "sigframe_32.h" +#include <asm/pgtable.h> +#include <asm/fixmap.h> +#include <asm/processor.h> +#include <asm/thread_info.h> +#include <asm/elf.h> + +#include <xen/interface/xen.h> + +#ifdef CONFIG_LGUEST_GUEST +#include <linux/lguest.h> +#include "../../../drivers/lguest/lg.h" +#endif + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +#define OFFSET(sym, str, mem) \ + DEFINE(sym, offsetof(struct str, mem)); + +/* workaround for a warning with -Wmissing-prototypes */ +void foo(void); + +void foo(void) +{ + OFFSET(SIGCONTEXT_eax, sigcontext, eax); + OFFSET(SIGCONTEXT_ebx, sigcontext, ebx); + OFFSET(SIGCONTEXT_ecx, sigcontext, ecx); + OFFSET(SIGCONTEXT_edx, sigcontext, edx); + OFFSET(SIGCONTEXT_esi, sigcontext, esi); + OFFSET(SIGCONTEXT_edi, sigcontext, edi); + OFFSET(SIGCONTEXT_ebp, sigcontext, ebp); + OFFSET(SIGCONTEXT_esp, sigcontext, esp); + OFFSET(SIGCONTEXT_eip, sigcontext, eip); + BLANK(); + + OFFSET(CPUINFO_x86, cpuinfo_x86, x86); + OFFSET(CPUINFO_x86_vendor, cpuinfo_x86, x86_vendor); + OFFSET(CPUINFO_x86_model, cpuinfo_x86, x86_model); + OFFSET(CPUINFO_x86_mask, cpuinfo_x86, x86_mask); + OFFSET(CPUINFO_hard_math, cpuinfo_x86, hard_math); + OFFSET(CPUINFO_cpuid_level, cpuinfo_x86, cpuid_level); + OFFSET(CPUINFO_x86_capability, cpuinfo_x86, x86_capability); + OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id); + BLANK(); + + OFFSET(TI_task, thread_info, task); + OFFSET(TI_exec_domain, thread_info, exec_domain); + OFFSET(TI_flags, thread_info, flags); + OFFSET(TI_status, thread_info, status); + OFFSET(TI_preempt_count, thread_info, preempt_count); + OFFSET(TI_addr_limit, thread_info, addr_limit); + OFFSET(TI_restart_block, thread_info, restart_block); + OFFSET(TI_sysenter_return, thread_info, sysenter_return); + OFFSET(TI_cpu, thread_info, cpu); + BLANK(); + + OFFSET(GDS_size, Xgt_desc_struct, size); + OFFSET(GDS_address, Xgt_desc_struct, address); + OFFSET(GDS_pad, Xgt_desc_struct, pad); + BLANK(); + + OFFSET(PT_EBX, pt_regs, ebx); + OFFSET(PT_ECX, pt_regs, ecx); + OFFSET(PT_EDX, pt_regs, edx); + OFFSET(PT_ESI, pt_regs, esi); + OFFSET(PT_EDI, pt_regs, edi); + OFFSET(PT_EBP, pt_regs, ebp); + OFFSET(PT_EAX, pt_regs, eax); + OFFSET(PT_DS, pt_regs, xds); + OFFSET(PT_ES, pt_regs, xes); + OFFSET(PT_FS, pt_regs, xfs); + OFFSET(PT_ORIG_EAX, pt_regs, orig_eax); + OFFSET(PT_EIP, pt_regs, eip); + OFFSET(PT_CS, pt_regs, xcs); + OFFSET(PT_EFLAGS, pt_regs, eflags); + OFFSET(PT_OLDESP, pt_regs, esp); + OFFSET(PT_OLDSS, pt_regs, xss); + BLANK(); + + OFFSET(EXEC_DOMAIN_handler, exec_domain, handler); + OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext); + BLANK(); + + OFFSET(pbe_address, pbe, address); + OFFSET(pbe_orig_address, pbe, orig_address); + OFFSET(pbe_next, pbe, next); + + /* Offset from the sysenter stack to tss.esp0 */ + DEFINE(TSS_sysenter_esp0, offsetof(struct tss_struct, x86_tss.esp0) - + sizeof(struct tss_struct)); + + DEFINE(PAGE_SIZE_asm, PAGE_SIZE); + DEFINE(PAGE_SHIFT_asm, PAGE_SHIFT); + DEFINE(PTRS_PER_PTE, PTRS_PER_PTE); + DEFINE(PTRS_PER_PMD, PTRS_PER_PMD); + DEFINE(PTRS_PER_PGD, PTRS_PER_PGD); + + DEFINE(VDSO_PRELINK_asm, VDSO_PRELINK); + + OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx); + +#ifdef CONFIG_PARAVIRT + BLANK(); + OFFSET(PARAVIRT_enabled, paravirt_ops, paravirt_enabled); + OFFSET(PARAVIRT_irq_disable, paravirt_ops, irq_disable); + OFFSET(PARAVIRT_irq_enable, paravirt_ops, irq_enable); + OFFSET(PARAVIRT_irq_enable_sysexit, paravirt_ops, irq_enable_sysexit); + OFFSET(PARAVIRT_iret, paravirt_ops, iret); + OFFSET(PARAVIRT_read_cr0, paravirt_ops, read_cr0); +#endif + +#ifdef CONFIG_XEN + BLANK(); + OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask); + OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending); +#endif + +#ifdef CONFIG_LGUEST_GUEST + BLANK(); + OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled); + OFFSET(LGUEST_PAGES_host_gdt_desc, lguest_pages, state.host_gdt_desc); + OFFSET(LGUEST_PAGES_host_idt_desc, lguest_pages, state.host_idt_desc); + OFFSET(LGUEST_PAGES_host_cr3, lguest_pages, state.host_cr3); + OFFSET(LGUEST_PAGES_host_sp, lguest_pages, state.host_sp); + OFFSET(LGUEST_PAGES_guest_gdt_desc, lguest_pages,state.guest_gdt_desc); + OFFSET(LGUEST_PAGES_guest_idt_desc, lguest_pages,state.guest_idt_desc); + OFFSET(LGUEST_PAGES_guest_gdt, lguest_pages, state.guest_gdt); + OFFSET(LGUEST_PAGES_regs_trapnum, lguest_pages, regs.trapnum); + OFFSET(LGUEST_PAGES_regs_errcode, lguest_pages, regs.errcode); + OFFSET(LGUEST_PAGES_regs, lguest_pages, regs); +#endif +} diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c new file mode 100644 index 000000000000..778953bc636c --- /dev/null +++ b/arch/x86/kernel/asm-offsets_64.c @@ -0,0 +1,85 @@ +/* + * Generate definitions needed by assembly language modules. + * This code generates raw asm output which is post-processed to extract + * and format the required data. + */ + +#include <linux/crypto.h> +#include <linux/sched.h> +#include <linux/stddef.h> +#include <linux/errno.h> +#include <linux/hardirq.h> +#include <linux/suspend.h> +#include <asm/pda.h> +#include <asm/processor.h> +#include <asm/segment.h> +#include <asm/thread_info.h> +#include <asm/ia32.h> + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +#define __NO_STUBS 1 +#undef __SYSCALL +#undef _ASM_X86_64_UNISTD_H_ +#define __SYSCALL(nr, sym) [nr] = 1, +static char syscalls[] = { +#include <asm/unistd.h> +}; + +int main(void) +{ +#define ENTRY(entry) DEFINE(tsk_ ## entry, offsetof(struct task_struct, entry)) + ENTRY(state); + ENTRY(flags); + ENTRY(thread); + ENTRY(pid); + BLANK(); +#undef ENTRY +#define ENTRY(entry) DEFINE(threadinfo_ ## entry, offsetof(struct thread_info, entry)) + ENTRY(flags); + ENTRY(addr_limit); + ENTRY(preempt_count); + ENTRY(status); + BLANK(); +#undef ENTRY +#define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry)) + ENTRY(kernelstack); + ENTRY(oldrsp); + ENTRY(pcurrent); + ENTRY(irqcount); + ENTRY(cpunumber); + ENTRY(irqstackptr); + ENTRY(data_offset); + BLANK(); +#undef ENTRY +#ifdef CONFIG_IA32_EMULATION +#define ENTRY(entry) DEFINE(IA32_SIGCONTEXT_ ## entry, offsetof(struct sigcontext_ia32, entry)) + ENTRY(eax); + ENTRY(ebx); + ENTRY(ecx); + ENTRY(edx); + ENTRY(esi); + ENTRY(edi); + ENTRY(ebp); + ENTRY(esp); + ENTRY(eip); + BLANK(); +#undef ENTRY + DEFINE(IA32_RT_SIGFRAME_sigcontext, + offsetof (struct rt_sigframe32, uc.uc_mcontext)); + BLANK(); +#endif + DEFINE(pbe_address, offsetof(struct pbe, address)); + DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address)); + DEFINE(pbe_next, offsetof(struct pbe, next)); + BLANK(); + DEFINE(TSS_ist, offsetof(struct tss_struct, ist)); + BLANK(); + DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx)); + BLANK(); + DEFINE(__NR_syscall_max, sizeof(syscalls) - 1); + return 0; +} diff --git a/arch/x86/kernel/audit_64.c b/arch/x86/kernel/audit_64.c new file mode 100644 index 000000000000..06d3e5a14d9d --- /dev/null +++ b/arch/x86/kernel/audit_64.c @@ -0,0 +1,81 @@ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/audit.h> +#include <asm/unistd.h> + +static unsigned dir_class[] = { +#include <asm-generic/audit_dir_write.h> +~0U +}; + +static unsigned read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +static unsigned write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +static unsigned chattr_class[] = { +#include <asm-generic/audit_change_attr.h> +~0U +}; + +static unsigned signal_class[] = { +#include <asm-generic/audit_signal.h> +~0U +}; + +int audit_classify_arch(int arch) +{ +#ifdef CONFIG_IA32_EMULATION + if (arch == AUDIT_ARCH_I386) + return 1; +#endif + return 0; +} + +int audit_classify_syscall(int abi, unsigned syscall) +{ +#ifdef CONFIG_IA32_EMULATION + extern int ia32_classify_syscall(unsigned); + if (abi == AUDIT_ARCH_I386) + return ia32_classify_syscall(syscall); +#endif + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_execve: + return 5; + default: + return 0; + } +} + +static int __init audit_classes_init(void) +{ +#ifdef CONFIG_IA32_EMULATION + extern __u32 ia32_dir_class[]; + extern __u32 ia32_write_class[]; + extern __u32 ia32_read_class[]; + extern __u32 ia32_chattr_class[]; + extern __u32 ia32_signal_class[]; + audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class); + audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class); + audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class); + audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class); + audit_register_class(AUDIT_CLASS_SIGNAL_32, ia32_signal_class); +#endif + audit_register_class(AUDIT_CLASS_WRITE, write_class); + audit_register_class(AUDIT_CLASS_READ, read_class); + audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class); + audit_register_class(AUDIT_CLASS_CHATTR, chattr_class); + audit_register_class(AUDIT_CLASS_SIGNAL, signal_class); + return 0; +} + +__initcall(audit_classes_init); diff --git a/arch/x86/kernel/bootflag.c b/arch/x86/kernel/bootflag.c new file mode 100644 index 000000000000..0b9860530a6b --- /dev/null +++ b/arch/x86/kernel/bootflag.c @@ -0,0 +1,98 @@ +/* + * Implement 'Simple Boot Flag Specification 2.0' + */ + + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/acpi.h> +#include <asm/io.h> + +#include <linux/mc146818rtc.h> + + +#define SBF_RESERVED (0x78) +#define SBF_PNPOS (1<<0) +#define SBF_BOOTING (1<<1) +#define SBF_DIAG (1<<2) +#define SBF_PARITY (1<<7) + + +int sbf_port __initdata = -1; /* set via acpi_boot_init() */ + + +static int __init parity(u8 v) +{ + int x = 0; + int i; + + for(i=0;i<8;i++) + { + x^=(v&1); + v>>=1; + } + return x; +} + +static void __init sbf_write(u8 v) +{ + unsigned long flags; + if(sbf_port != -1) + { + v &= ~SBF_PARITY; + if(!parity(v)) + v|=SBF_PARITY; + + printk(KERN_INFO "Simple Boot Flag at 0x%x set to 0x%x\n", sbf_port, v); + + spin_lock_irqsave(&rtc_lock, flags); + CMOS_WRITE(v, sbf_port); + spin_unlock_irqrestore(&rtc_lock, flags); + } +} + +static u8 __init sbf_read(void) +{ + u8 v; + unsigned long flags; + if(sbf_port == -1) + return 0; + spin_lock_irqsave(&rtc_lock, flags); + v = CMOS_READ(sbf_port); + spin_unlock_irqrestore(&rtc_lock, flags); + return v; +} + +static int __init sbf_value_valid(u8 v) +{ + if(v&SBF_RESERVED) /* Reserved bits */ + return 0; + if(!parity(v)) + return 0; + return 1; +} + +static int __init sbf_init(void) +{ + u8 v; + if(sbf_port == -1) + return 0; + v = sbf_read(); + if(!sbf_value_valid(v)) + printk(KERN_WARNING "Simple Boot Flag value 0x%x read from CMOS RAM was invalid\n",v); + + v &= ~SBF_RESERVED; + v &= ~SBF_BOOTING; + v &= ~SBF_DIAG; +#if defined(CONFIG_ISAPNP) + v |= SBF_PNPOS; +#endif + sbf_write(v); + return 0; +} + +module_init(sbf_init); diff --git a/arch/x86/kernel/bugs_64.c b/arch/x86/kernel/bugs_64.c new file mode 100644 index 000000000000..4e5e9d364d63 --- /dev/null +++ b/arch/x86/kernel/bugs_64.c @@ -0,0 +1,24 @@ +/* + * arch/x86_64/kernel/bugs.c + * + * Copyright (C) 1994 Linus Torvalds + * Copyright (C) 2000 SuSE + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/alternative.h> +#include <asm/bugs.h> +#include <asm/processor.h> +#include <asm/mtrr.h> + +void __init check_bugs(void) +{ + identify_cpu(&boot_cpu_data); + mtrr_bp_init(); +#if !defined(CONFIG_SMP) + printk("CPU: "); + print_cpu_info(&boot_cpu_data); +#endif + alternative_instructions(); +} diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile new file mode 100644 index 000000000000..778396c78d65 --- /dev/null +++ b/arch/x86/kernel/cpu/Makefile @@ -0,0 +1,20 @@ +# +# Makefile for x86-compatible CPU details and quirks +# + +obj-y := common.o proc.o bugs.o + +obj-y += amd.o +obj-y += cyrix.o +obj-y += centaur.o +obj-y += transmeta.o +obj-y += intel.o intel_cacheinfo.o addon_cpuid_features.o +obj-y += nexgen.o +obj-y += umc.o + +obj-$(CONFIG_X86_MCE) += mcheck/ + +obj-$(CONFIG_MTRR) += mtrr/ +obj-$(CONFIG_CPU_FREQ) += cpufreq/ + +obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c new file mode 100644 index 000000000000..3e91d3ee26ec --- /dev/null +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -0,0 +1,50 @@ + +/* + * Routines to indentify additional cpu features that are scattered in + * cpuid space. + */ + +#include <linux/cpu.h> + +#include <asm/processor.h> + +struct cpuid_bit { + u16 feature; + u8 reg; + u8 bit; + u32 level; +}; + +enum cpuid_regs { + CR_EAX = 0, + CR_ECX, + CR_EDX, + CR_EBX +}; + +void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) +{ + u32 max_level; + u32 regs[4]; + const struct cpuid_bit *cb; + + static const struct cpuid_bit cpuid_bits[] = { + { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 }, + { 0, 0, 0, 0 } + }; + + for (cb = cpuid_bits; cb->feature; cb++) { + + /* Verify that the level is valid */ + max_level = cpuid_eax(cb->level & 0xffff0000); + if (max_level < cb->level || + max_level > (cb->level | 0xffff)) + continue; + + cpuid(cb->level, ®s[CR_EAX], ®s[CR_EBX], + ®s[CR_ECX], ®s[CR_EDX]); + + if (regs[cb->reg] & (1 << cb->bit)) + set_bit(cb->feature, c->x86_capability); + } +} diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c new file mode 100644 index 000000000000..dcf6bbb1c7c0 --- /dev/null +++ b/arch/x86/kernel/cpu/amd.c @@ -0,0 +1,337 @@ +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/mm.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/apic.h> + +#include "cpu.h" + +/* + * B step AMD K6 before B 9730xxxx have hardware bugs that can cause + * misexecution of code under Linux. Owners of such processors should + * contact AMD for precise details and a CPU swap. + * + * See http://www.multimania.com/poulot/k6bug.html + * http://www.amd.com/K6/k6docs/revgd.html + * + * The following test is erm.. interesting. AMD neglected to up + * the chip setting when fixing the bug but they also tweaked some + * performance at the same time.. + */ + +extern void vide(void); +__asm__(".align 4\nvide: ret"); + +#ifdef CONFIG_X86_LOCAL_APIC +#define ENABLE_C1E_MASK 0x18000000 +#define CPUID_PROCESSOR_SIGNATURE 1 +#define CPUID_XFAM 0x0ff00000 +#define CPUID_XFAM_K8 0x00000000 +#define CPUID_XFAM_10H 0x00100000 +#define CPUID_XFAM_11H 0x00200000 +#define CPUID_XMOD 0x000f0000 +#define CPUID_XMOD_REV_F 0x00040000 + +/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ +static __cpuinit int amd_apic_timer_broken(void) +{ + u32 lo, hi; + u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + switch (eax & CPUID_XFAM) { + case CPUID_XFAM_K8: + if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) + break; + case CPUID_XFAM_10H: + case CPUID_XFAM_11H: + rdmsr(MSR_K8_ENABLE_C1E, lo, hi); + if (lo & ENABLE_C1E_MASK) + return 1; + break; + default: + /* err on the side of caution */ + return 1; + } + return 0; +} +#endif + +int force_mwait __cpuinitdata; + +static void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ + u32 l, h; + int mbytes = num_physpages >> (20-PAGE_SHIFT); + int r; + +#ifdef CONFIG_SMP + unsigned long long value; + + /* Disable TLB flush filter by setting HWCR.FFDIS on K8 + * bit 6 of msr C001_0015 + * + * Errata 63 for SH-B3 steppings + * Errata 122 for all steppings (F+ have it disabled by default) + */ + if (c->x86 == 15) { + rdmsrl(MSR_K7_HWCR, value); + value |= 1 << 6; + wrmsrl(MSR_K7_HWCR, value); + } +#endif + + /* + * FIXME: We should handle the K5 here. Set up the write + * range and also turn on MSR 83 bits 4 and 31 (write alloc, + * no bus pipeline) + */ + + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; + 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + clear_bit(0*32+31, c->x86_capability); + + r = get_model_name(c); + + switch(c->x86) + { + case 4: + /* + * General Systems BIOSen alias the cpu frequency registers + * of the Elan at 0x000df000. Unfortuantly, one of the Linux + * drivers subsequently pokes it, and changes the CPU speed. + * Workaround : Remove the unneeded alias. + */ +#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */ +#define CBAR_ENB (0x80000000) +#define CBAR_KEY (0X000000CB) + if (c->x86_model==9 || c->x86_model == 10) { + if (inl (CBAR) & CBAR_ENB) + outl (0 | CBAR_KEY, CBAR); + } + break; + case 5: + if( c->x86_model < 6 ) + { + /* Based on AMD doc 20734R - June 2000 */ + if ( c->x86_model == 0 ) { + clear_bit(X86_FEATURE_APIC, c->x86_capability); + set_bit(X86_FEATURE_PGE, c->x86_capability); + } + break; + } + + if ( c->x86_model == 6 && c->x86_mask == 1 ) { + const int K6_BUG_LOOP = 1000000; + int n; + void (*f_vide)(void); + unsigned long d, d2; + + printk(KERN_INFO "AMD K6 stepping B detected - "); + + /* + * It looks like AMD fixed the 2.6.2 bug and improved indirect + * calls at the same time. + */ + + n = K6_BUG_LOOP; + f_vide = vide; + rdtscl(d); + while (n--) + f_vide(); + rdtscl(d2); + d = d2-d; + + if (d > 20*K6_BUG_LOOP) + printk("system stability may be impaired when more than 32 MB are used.\n"); + else + printk("probably OK (after B9730xxxx).\n"); + printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); + } + + /* K6 with old style WHCR */ + if (c->x86_model < 8 || + (c->x86_model== 8 && c->x86_mask < 8)) { + /* We can only write allocate on the low 508Mb */ + if(mbytes>508) + mbytes=508; + + rdmsr(MSR_K6_WHCR, l, h); + if ((l&0x0000FFFF)==0) { + unsigned long flags; + l=(1<<0)|((mbytes/4)<<1); + local_irq_save(flags); + wbinvd(); + wrmsr(MSR_K6_WHCR, l, h); + local_irq_restore(flags); + printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n", + mbytes); + } + break; + } + + if ((c->x86_model == 8 && c->x86_mask >7) || + c->x86_model == 9 || c->x86_model == 13) { + /* The more serious chips .. */ + + if(mbytes>4092) + mbytes=4092; + + rdmsr(MSR_K6_WHCR, l, h); + if ((l&0xFFFF0000)==0) { + unsigned long flags; + l=((mbytes>>2)<<22)|(1<<16); + local_irq_save(flags); + wbinvd(); + wrmsr(MSR_K6_WHCR, l, h); + local_irq_restore(flags); + printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n", + mbytes); + } + + /* Set MTRR capability flag if appropriate */ + if (c->x86_model == 13 || c->x86_model == 9 || + (c->x86_model == 8 && c->x86_mask >= 8)) + set_bit(X86_FEATURE_K6_MTRR, c->x86_capability); + break; + } + + if (c->x86_model == 10) { + /* AMD Geode LX is model 10 */ + /* placeholder for any needed mods */ + break; + } + break; + case 6: /* An Athlon/Duron */ + + /* Bit 15 of Athlon specific MSR 15, needs to be 0 + * to enable SSE on Palomino/Morgan/Barton CPU's. + * If the BIOS didn't enable it already, enable it here. + */ + if (c->x86_model >= 6 && c->x86_model <= 10) { + if (!cpu_has(c, X86_FEATURE_XMM)) { + printk(KERN_INFO "Enabling disabled K7/SSE Support.\n"); + rdmsr(MSR_K7_HWCR, l, h); + l &= ~0x00008000; + wrmsr(MSR_K7_HWCR, l, h); + set_bit(X86_FEATURE_XMM, c->x86_capability); + } + } + + /* It's been determined by AMD that Athlons since model 8 stepping 1 + * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx + * As per AMD technical note 27212 0.2 + */ + if ((c->x86_model == 8 && c->x86_mask>=1) || (c->x86_model > 8)) { + rdmsr(MSR_K7_CLK_CTL, l, h); + if ((l & 0xfff00000) != 0x20000000) { + printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l, + ((l & 0x000fffff)|0x20000000)); + wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); + } + } + break; + } + + switch (c->x86) { + case 15: + /* Use K8 tuning for Fam10h and Fam11h */ + case 0x10: + case 0x11: + set_bit(X86_FEATURE_K8, c->x86_capability); + break; + case 6: + set_bit(X86_FEATURE_K7, c->x86_capability); + break; + } + if (c->x86 >= 6) + set_bit(X86_FEATURE_FXSAVE_LEAK, c->x86_capability); + + display_cacheinfo(c); + + if (cpuid_eax(0x80000000) >= 0x80000008) { + c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; + } + + if (cpuid_eax(0x80000000) >= 0x80000007) { + c->x86_power = cpuid_edx(0x80000007); + if (c->x86_power & (1<<8)) + set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability); + } + +#ifdef CONFIG_X86_HT + /* + * On a AMD multi core setup the lower bits of the APIC id + * distingush the cores. + */ + if (c->x86_max_cores > 1) { + int cpu = smp_processor_id(); + unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf; + + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + c->cpu_core_id = c->phys_proc_id & ((1<<bits)-1); + c->phys_proc_id >>= bits; + printk(KERN_INFO "CPU %d(%d) -> Core %d\n", + cpu, c->x86_max_cores, c->cpu_core_id); + } +#endif + + if (cpuid_eax(0x80000000) >= 0x80000006) { + if ((c->x86 == 0x10) && (cpuid_edx(0x80000006) & 0xf000)) + num_cache_leaves = 4; + else + num_cache_leaves = 3; + } + +#ifdef CONFIG_X86_LOCAL_APIC + if (amd_apic_timer_broken()) + local_apic_timer_disabled = 1; +#endif + + if (c->x86 == 0x10 && !force_mwait) + clear_bit(X86_FEATURE_MWAIT, c->x86_capability); + + /* K6s reports MCEs but don't actually have all the MSRs */ + if (c->x86 < 6) + clear_bit(X86_FEATURE_MCE, c->x86_capability); +} + +static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size) +{ + /* AMD errata T13 (order #21922) */ + if ((c->x86 == 6)) { + if (c->x86_model == 3 && c->x86_mask == 0) /* Duron Rev A0 */ + size = 64; + if (c->x86_model == 4 && + (c->x86_mask==0 || c->x86_mask==1)) /* Tbird rev A1/A2 */ + size = 256; + } + return size; +} + +static struct cpu_dev amd_cpu_dev __cpuinitdata = { + .c_vendor = "AMD", + .c_ident = { "AuthenticAMD" }, + .c_models = { + { .vendor = X86_VENDOR_AMD, .family = 4, .model_names = + { + [3] = "486 DX/2", + [7] = "486 DX/2-WB", + [8] = "486 DX/4", + [9] = "486 DX/4-WB", + [14] = "Am5x86-WT", + [15] = "Am5x86-WB" + } + }, + }, + .c_init = init_amd, + .c_size_cache = amd_size_cache, +}; + +int __init amd_init_cpu(void) +{ + cpu_devs[X86_VENDOR_AMD] = &amd_cpu_dev; + return 0; +} diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c new file mode 100644 index 000000000000..59266f03d1cd --- /dev/null +++ b/arch/x86/kernel/cpu/bugs.c @@ -0,0 +1,192 @@ +/* + * arch/i386/cpu/bugs.c + * + * Copyright (C) 1994 Linus Torvalds + * + * Cyrix stuff, June 1998 by: + * - Rafael R. Reilova (moved everything from head.S), + * <rreilova@ececs.uc.edu> + * - Channing Corn (tests & fixes), + * - Andrew D. Balsa (code cleanup). + */ +#include <linux/init.h> +#include <linux/utsname.h> +#include <asm/bugs.h> +#include <asm/processor.h> +#include <asm/i387.h> +#include <asm/msr.h> +#include <asm/paravirt.h> +#include <asm/alternative.h> + +static int __init no_halt(char *s) +{ + boot_cpu_data.hlt_works_ok = 0; + return 1; +} + +__setup("no-hlt", no_halt); + +static int __init mca_pentium(char *s) +{ + mca_pentium_flag = 1; + return 1; +} + +__setup("mca-pentium", mca_pentium); + +static int __init no_387(char *s) +{ + boot_cpu_data.hard_math = 0; + write_cr0(0xE | read_cr0()); + return 1; +} + +__setup("no387", no_387); + +static double __initdata x = 4195835.0; +static double __initdata y = 3145727.0; + +/* + * This used to check for exceptions.. + * However, it turns out that to support that, + * the XMM trap handlers basically had to + * be buggy. So let's have a correct XMM trap + * handler, and forget about printing out + * some status at boot. + * + * We should really only care about bugs here + * anyway. Not features. + */ +static void __init check_fpu(void) +{ + if (!boot_cpu_data.hard_math) { +#ifndef CONFIG_MATH_EMULATION + printk(KERN_EMERG "No coprocessor found and no math emulation present.\n"); + printk(KERN_EMERG "Giving up.\n"); + for (;;) ; +#endif + return; + } + +/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */ + /* Test for the divl bug.. */ + __asm__("fninit\n\t" + "fldl %1\n\t" + "fdivl %2\n\t" + "fmull %2\n\t" + "fldl %1\n\t" + "fsubp %%st,%%st(1)\n\t" + "fistpl %0\n\t" + "fwait\n\t" + "fninit" + : "=m" (*&boot_cpu_data.fdiv_bug) + : "m" (*&x), "m" (*&y)); + if (boot_cpu_data.fdiv_bug) + printk("Hmm, FPU with FDIV bug.\n"); +} + +static void __init check_hlt(void) +{ + if (paravirt_enabled()) + return; + + printk(KERN_INFO "Checking 'hlt' instruction... "); + if (!boot_cpu_data.hlt_works_ok) { + printk("disabled\n"); + return; + } + halt(); + halt(); + halt(); + halt(); + printk("OK.\n"); +} + +/* + * Most 386 processors have a bug where a POPAD can lock the + * machine even from user space. + */ + +static void __init check_popad(void) +{ +#ifndef CONFIG_X86_POPAD_OK + int res, inp = (int) &res; + + printk(KERN_INFO "Checking for popad bug... "); + __asm__ __volatile__( + "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " + : "=&a" (res) + : "d" (inp) + : "ecx", "edi" ); + /* If this fails, it means that any user program may lock the CPU hard. Too bad. */ + if (res != 12345678) printk( "Buggy.\n" ); + else printk( "OK.\n" ); +#endif +} + +/* + * Check whether we are able to run this kernel safely on SMP. + * + * - In order to run on a i386, we need to be compiled for i386 + * (for due to lack of "invlpg" and working WP on a i386) + * - In order to run on anything without a TSC, we need to be + * compiled for a i486. + * - In order to support the local APIC on a buggy Pentium machine, + * we need to be compiled with CONFIG_X86_GOOD_APIC disabled, + * which happens implicitly if compiled for a Pentium or lower + * (unless an advanced selection of CPU features is used) as an + * otherwise config implies a properly working local APIC without + * the need to do extra reads from the APIC. +*/ + +static void __init check_config(void) +{ +/* + * We'd better not be a i386 if we're configured to use some + * i486+ only features! (WP works in supervisor mode and the + * new "invlpg" and "bswap" instructions) + */ +#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP) + if (boot_cpu_data.x86 == 3) + panic("Kernel requires i486+ for 'invlpg' and other features"); +#endif + +/* + * If we configured ourselves for a TSC, we'd better have one! + */ +#ifdef CONFIG_X86_TSC + if (!cpu_has_tsc && !tsc_disable) + panic("Kernel compiled for Pentium+, requires TSC feature!"); +#endif + +/* + * If we were told we had a good local APIC, check for buggy Pentia, + * i.e. all B steppings and the C2 stepping of P54C when using their + * integrated APIC (see 11AP erratum in "Pentium Processor + * Specification Update"). + */ +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC) + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL + && cpu_has_apic + && boot_cpu_data.x86 == 5 + && boot_cpu_data.x86_model == 2 + && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11)) + panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!"); +#endif +} + + +void __init check_bugs(void) +{ + identify_boot_cpu(); +#ifndef CONFIG_SMP + printk("CPU: "); + print_cpu_info(&boot_cpu_data); +#endif + check_config(); + check_fpu(); + check_hlt(); + check_popad(); + init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); + alternative_instructions(); +} diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c new file mode 100644 index 000000000000..473eac883c7b --- /dev/null +++ b/arch/x86/kernel/cpu/centaur.c @@ -0,0 +1,471 @@ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <asm/processor.h> +#include <asm/msr.h> +#include <asm/e820.h> +#include <asm/mtrr.h> +#include "cpu.h" + +#ifdef CONFIG_X86_OOSTORE + +static u32 __cpuinit power2(u32 x) +{ + u32 s=1; + while(s<=x) + s<<=1; + return s>>=1; +} + + +/* + * Set up an actual MCR + */ + +static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key) +{ + u32 lo, hi; + + hi = base & ~0xFFF; + lo = ~(size-1); /* Size is a power of 2 so this makes a mask */ + lo &= ~0xFFF; /* Remove the ctrl value bits */ + lo |= key; /* Attribute we wish to set */ + wrmsr(reg+MSR_IDT_MCR0, lo, hi); + mtrr_centaur_report_mcr(reg, lo, hi); /* Tell the mtrr driver */ +} + +/* + * Figure what we can cover with MCR's + * + * Shortcut: We know you can't put 4Gig of RAM on a winchip + */ + +static u32 __cpuinit ramtop(void) /* 16388 */ +{ + int i; + u32 top = 0; + u32 clip = 0xFFFFFFFFUL; + + for (i = 0; i < e820.nr_map; i++) { + unsigned long start, end; + + if (e820.map[i].addr > 0xFFFFFFFFUL) + continue; + /* + * Don't MCR over reserved space. Ignore the ISA hole + * we frob around that catastrophy already + */ + + if (e820.map[i].type == E820_RESERVED) + { + if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip) + clip = e820.map[i].addr; + continue; + } + start = e820.map[i].addr; + end = e820.map[i].addr + e820.map[i].size; + if (start >= end) + continue; + if (end > top) + top = end; + } + /* Everything below 'top' should be RAM except for the ISA hole. + Because of the limited MCR's we want to map NV/ACPI into our + MCR range for gunk in RAM + + Clip might cause us to MCR insufficient RAM but that is an + acceptable failure mode and should only bite obscure boxes with + a VESA hole at 15Mb + + The second case Clip sometimes kicks in is when the EBDA is marked + as reserved. Again we fail safe with reasonable results + */ + + if(top>clip) + top=clip; + + return top; +} + +/* + * Compute a set of MCR's to give maximum coverage + */ + +static int __cpuinit centaur_mcr_compute(int nr, int key) +{ + u32 mem = ramtop(); + u32 root = power2(mem); + u32 base = root; + u32 top = root; + u32 floor = 0; + int ct = 0; + + while(ct<nr) + { + u32 fspace = 0; + + /* + * Find the largest block we will fill going upwards + */ + + u32 high = power2(mem-top); + + /* + * Find the largest block we will fill going downwards + */ + + u32 low = base/2; + + /* + * Don't fill below 1Mb going downwards as there + * is an ISA hole in the way. + */ + + if(base <= 1024*1024) + low = 0; + + /* + * See how much space we could cover by filling below + * the ISA hole + */ + + if(floor == 0) + fspace = 512*1024; + else if(floor ==512*1024) + fspace = 128*1024; + + /* And forget ROM space */ + + /* + * Now install the largest coverage we get + */ + + if(fspace > high && fspace > low) + { + centaur_mcr_insert(ct, floor, fspace, key); + floor += fspace; + } + else if(high > low) + { + centaur_mcr_insert(ct, top, high, key); + top += high; + } + else if(low > 0) + { + base -= low; + centaur_mcr_insert(ct, base, low, key); + } + else break; + ct++; + } + /* + * We loaded ct values. We now need to set the mask. The caller + * must do this bit. + */ + + return ct; +} + +static void __cpuinit centaur_create_optimal_mcr(void) +{ + int i; + /* + * Allocate up to 6 mcrs to mark as much of ram as possible + * as write combining and weak write ordered. + * + * To experiment with: Linux never uses stack operations for + * mmio spaces so we could globally enable stack operation wc + * + * Load the registers with type 31 - full write combining, all + * writes weakly ordered. + */ + int used = centaur_mcr_compute(6, 31); + + /* + * Wipe unused MCRs + */ + + for(i=used;i<8;i++) + wrmsr(MSR_IDT_MCR0+i, 0, 0); +} + +static void __cpuinit winchip2_create_optimal_mcr(void) +{ + u32 lo, hi; + int i; + + /* + * Allocate up to 6 mcrs to mark as much of ram as possible + * as write combining, weak store ordered. + * + * Load the registers with type 25 + * 8 - weak write ordering + * 16 - weak read ordering + * 1 - write combining + */ + + int used = centaur_mcr_compute(6, 25); + + /* + * Mark the registers we are using. + */ + + rdmsr(MSR_IDT_MCR_CTRL, lo, hi); + for(i=0;i<used;i++) + lo|=1<<(9+i); + wrmsr(MSR_IDT_MCR_CTRL, lo, hi); + + /* + * Wipe unused MCRs + */ + + for(i=used;i<8;i++) + wrmsr(MSR_IDT_MCR0+i, 0, 0); +} + +/* + * Handle the MCR key on the Winchip 2. + */ + +static void __cpuinit winchip2_unprotect_mcr(void) +{ + u32 lo, hi; + u32 key; + + rdmsr(MSR_IDT_MCR_CTRL, lo, hi); + lo&=~0x1C0; /* blank bits 8-6 */ + key = (lo>>17) & 7; + lo |= key<<6; /* replace with unlock key */ + wrmsr(MSR_IDT_MCR_CTRL, lo, hi); +} + +static void __cpuinit winchip2_protect_mcr(void) +{ + u32 lo, hi; + + rdmsr(MSR_IDT_MCR_CTRL, lo, hi); + lo&=~0x1C0; /* blank bits 8-6 */ + wrmsr(MSR_IDT_MCR_CTRL, lo, hi); +} +#endif /* CONFIG_X86_OOSTORE */ + +#define ACE_PRESENT (1 << 6) +#define ACE_ENABLED (1 << 7) +#define ACE_FCR (1 << 28) /* MSR_VIA_FCR */ + +#define RNG_PRESENT (1 << 2) +#define RNG_ENABLED (1 << 3) +#define RNG_ENABLE (1 << 6) /* MSR_VIA_RNG */ + +static void __cpuinit init_c3(struct cpuinfo_x86 *c) +{ + u32 lo, hi; + + /* Test for Centaur Extended Feature Flags presence */ + if (cpuid_eax(0xC0000000) >= 0xC0000001) { + u32 tmp = cpuid_edx(0xC0000001); + + /* enable ACE unit, if present and disabled */ + if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) { + rdmsr (MSR_VIA_FCR, lo, hi); + lo |= ACE_FCR; /* enable ACE unit */ + wrmsr (MSR_VIA_FCR, lo, hi); + printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n"); + } + + /* enable RNG unit, if present and disabled */ + if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) { + rdmsr (MSR_VIA_RNG, lo, hi); + lo |= RNG_ENABLE; /* enable RNG unit */ + wrmsr (MSR_VIA_RNG, lo, hi); + printk(KERN_INFO "CPU: Enabled h/w RNG\n"); + } + + /* store Centaur Extended Feature Flags as + * word 5 of the CPU capability bit array + */ + c->x86_capability[5] = cpuid_edx(0xC0000001); + } + + /* Cyrix III family needs CX8 & PGE explicity enabled. */ + if (c->x86_model >=6 && c->x86_model <= 9) { + rdmsr (MSR_VIA_FCR, lo, hi); + lo |= (1<<1 | 1<<7); + wrmsr (MSR_VIA_FCR, lo, hi); + set_bit(X86_FEATURE_CX8, c->x86_capability); + } + + /* Before Nehemiah, the C3's had 3dNOW! */ + if (c->x86_model >=6 && c->x86_model <9) + set_bit(X86_FEATURE_3DNOW, c->x86_capability); + + get_model_name(c); + display_cacheinfo(c); +} + +static void __cpuinit init_centaur(struct cpuinfo_x86 *c) +{ + enum { + ECX8=1<<1, + EIERRINT=1<<2, + DPM=1<<3, + DMCE=1<<4, + DSTPCLK=1<<5, + ELINEAR=1<<6, + DSMC=1<<7, + DTLOCK=1<<8, + EDCTLB=1<<8, + EMMX=1<<9, + DPDC=1<<11, + EBRPRED=1<<12, + DIC=1<<13, + DDC=1<<14, + DNA=1<<15, + ERETSTK=1<<16, + E2MMX=1<<19, + EAMD3D=1<<20, + }; + + char *name; + u32 fcr_set=0; + u32 fcr_clr=0; + u32 lo,hi,newlo; + u32 aa,bb,cc,dd; + + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; + 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + clear_bit(0*32+31, c->x86_capability); + + switch (c->x86) { + + case 5: + switch(c->x86_model) { + case 4: + name="C6"; + fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK; + fcr_clr=DPDC; + printk(KERN_NOTICE "Disabling bugged TSC.\n"); + clear_bit(X86_FEATURE_TSC, c->x86_capability); +#ifdef CONFIG_X86_OOSTORE + centaur_create_optimal_mcr(); + /* Enable + write combining on non-stack, non-string + write combining on string, all types + weak write ordering + + The C6 original lacks weak read order + + Note 0x120 is write only on Winchip 1 */ + + wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0); +#endif + break; + case 8: + switch(c->x86_mask) { + default: + name="2"; + break; + case 7 ... 9: + name="2A"; + break; + case 10 ... 15: + name="2B"; + break; + } + fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D; + fcr_clr=DPDC; +#ifdef CONFIG_X86_OOSTORE + winchip2_unprotect_mcr(); + winchip2_create_optimal_mcr(); + rdmsr(MSR_IDT_MCR_CTRL, lo, hi); + /* Enable + write combining on non-stack, non-string + write combining on string, all types + weak write ordering + */ + lo|=31; + wrmsr(MSR_IDT_MCR_CTRL, lo, hi); + winchip2_protect_mcr(); +#endif + break; + case 9: + name="3"; + fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D; + fcr_clr=DPDC; +#ifdef CONFIG_X86_OOSTORE + winchip2_unprotect_mcr(); + winchip2_create_optimal_mcr(); + rdmsr(MSR_IDT_MCR_CTRL, lo, hi); + /* Enable + write combining on non-stack, non-string + write combining on string, all types + weak write ordering + */ + lo|=31; + wrmsr(MSR_IDT_MCR_CTRL, lo, hi); + winchip2_protect_mcr(); +#endif + break; + default: + name="??"; + } + + rdmsr(MSR_IDT_FCR1, lo, hi); + newlo=(lo|fcr_set) & (~fcr_clr); + + if (newlo!=lo) { + printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo ); + wrmsr(MSR_IDT_FCR1, newlo, hi ); + } else { + printk(KERN_INFO "Centaur FCR is 0x%X\n",lo); + } + /* Emulate MTRRs using Centaur's MCR. */ + set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability); + /* Report CX8 */ + set_bit(X86_FEATURE_CX8, c->x86_capability); + /* Set 3DNow! on Winchip 2 and above. */ + if (c->x86_model >=8) + set_bit(X86_FEATURE_3DNOW, c->x86_capability); + /* See if we can find out some more. */ + if ( cpuid_eax(0x80000000) >= 0x80000005 ) { + /* Yes, we can. */ + cpuid(0x80000005,&aa,&bb,&cc,&dd); + /* Add L1 data and code cache sizes. */ + c->x86_cache_size = (cc>>24)+(dd>>24); + } + sprintf( c->x86_model_id, "WinChip %s", name ); + break; + + case 6: + init_c3(c); + break; + } +} + +static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size) +{ + /* VIA C3 CPUs (670-68F) need further shifting. */ + if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8))) + size >>= 8; + + /* VIA also screwed up Nehemiah stepping 1, and made + it return '65KB' instead of '64KB' + - Note, it seems this may only be in engineering samples. */ + if ((c->x86==6) && (c->x86_model==9) && (c->x86_mask==1) && (size==65)) + size -=1; + + return size; +} + +static struct cpu_dev centaur_cpu_dev __cpuinitdata = { + .c_vendor = "Centaur", + .c_ident = { "CentaurHauls" }, + .c_init = init_centaur, + .c_size_cache = centaur_size_cache, +}; + +int __init centaur_init_cpu(void) +{ + cpu_devs[X86_VENDOR_CENTAUR] = ¢aur_cpu_dev; + return 0; +} diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c new file mode 100644 index 000000000000..d506201d397c --- /dev/null +++ b/arch/x86/kernel/cpu/common.c @@ -0,0 +1,733 @@ +#include <linux/init.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/smp.h> +#include <linux/module.h> +#include <linux/percpu.h> +#include <linux/bootmem.h> +#include <asm/semaphore.h> +#include <asm/processor.h> +#include <asm/i387.h> +#include <asm/msr.h> +#include <asm/io.h> +#include <asm/mmu_context.h> +#include <asm/mtrr.h> +#include <asm/mce.h> +#ifdef CONFIG_X86_LOCAL_APIC +#include <asm/mpspec.h> +#include <asm/apic.h> +#include <mach_apic.h> +#endif + +#include "cpu.h" + +DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { + [GDT_ENTRY_KERNEL_CS] = { 0x0000ffff, 0x00cf9a00 }, + [GDT_ENTRY_KERNEL_DS] = { 0x0000ffff, 0x00cf9200 }, + [GDT_ENTRY_DEFAULT_USER_CS] = { 0x0000ffff, 0x00cffa00 }, + [GDT_ENTRY_DEFAULT_USER_DS] = { 0x0000ffff, 0x00cff200 }, + /* + * Segments used for calling PnP BIOS have byte granularity. + * They code segments and data segments have fixed 64k limits, + * the transfer segment sizes are set at run time. + */ + [GDT_ENTRY_PNPBIOS_CS32] = { 0x0000ffff, 0x00409a00 },/* 32-bit code */ + [GDT_ENTRY_PNPBIOS_CS16] = { 0x0000ffff, 0x00009a00 },/* 16-bit code */ + [GDT_ENTRY_PNPBIOS_DS] = { 0x0000ffff, 0x00009200 }, /* 16-bit data */ + [GDT_ENTRY_PNPBIOS_TS1] = { 0x00000000, 0x00009200 },/* 16-bit data */ + [GDT_ENTRY_PNPBIOS_TS2] = { 0x00000000, 0x00009200 },/* 16-bit data */ + /* + * The APM segments have byte granularity and their bases + * are set at run time. All have 64k limits. + */ + [GDT_ENTRY_APMBIOS_BASE] = { 0x0000ffff, 0x00409a00 },/* 32-bit code */ + /* 16-bit code */ + [GDT_ENTRY_APMBIOS_BASE+1] = { 0x0000ffff, 0x00009a00 }, + [GDT_ENTRY_APMBIOS_BASE+2] = { 0x0000ffff, 0x00409200 }, /* data */ + + [GDT_ENTRY_ESPFIX_SS] = { 0x00000000, 0x00c09200 }, + [GDT_ENTRY_PERCPU] = { 0x00000000, 0x00000000 }, +} }; +EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); + +static int cachesize_override __cpuinitdata = -1; +static int disable_x86_fxsr __cpuinitdata; +static int disable_x86_serial_nr __cpuinitdata = 1; +static int disable_x86_sep __cpuinitdata; + +struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {}; + +extern int disable_pse; + +static void __cpuinit default_init(struct cpuinfo_x86 * c) +{ + /* Not much we can do here... */ + /* Check if at least it has cpuid */ + if (c->cpuid_level == -1) { + /* No cpuid. It must be an ancient CPU */ + if (c->x86 == 4) + strcpy(c->x86_model_id, "486"); + else if (c->x86 == 3) + strcpy(c->x86_model_id, "386"); + } +} + +static struct cpu_dev __cpuinitdata default_cpu = { + .c_init = default_init, + .c_vendor = "Unknown", +}; +static struct cpu_dev * this_cpu __cpuinitdata = &default_cpu; + +static int __init cachesize_setup(char *str) +{ + get_option (&str, &cachesize_override); + return 1; +} +__setup("cachesize=", cachesize_setup); + +int __cpuinit get_model_name(struct cpuinfo_x86 *c) +{ + unsigned int *v; + char *p, *q; + + if (cpuid_eax(0x80000000) < 0x80000004) + return 0; + + v = (unsigned int *) c->x86_model_id; + cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); + cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); + cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); + c->x86_model_id[48] = 0; + + /* Intel chips right-justify this string for some dumb reason; + undo that brain damage */ + p = q = &c->x86_model_id[0]; + while ( *p == ' ' ) + p++; + if ( p != q ) { + while ( *p ) + *q++ = *p++; + while ( q <= &c->x86_model_id[48] ) + *q++ = '\0'; /* Zero-pad the rest */ + } + + return 1; +} + + +void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) +{ + unsigned int n, dummy, ecx, edx, l2size; + + n = cpuid_eax(0x80000000); + + if (n >= 0x80000005) { + cpuid(0x80000005, &dummy, &dummy, &ecx, &edx); + printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", + edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); + c->x86_cache_size=(ecx>>24)+(edx>>24); + } + + if (n < 0x80000006) /* Some chips just has a large L1. */ + return; + + ecx = cpuid_ecx(0x80000006); + l2size = ecx >> 16; + + /* do processor-specific cache resizing */ + if (this_cpu->c_size_cache) + l2size = this_cpu->c_size_cache(c,l2size); + + /* Allow user to override all this if necessary. */ + if (cachesize_override != -1) + l2size = cachesize_override; + + if ( l2size == 0 ) + return; /* Again, no L2 cache is possible */ + + c->x86_cache_size = l2size; + + printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", + l2size, ecx & 0xFF); +} + +/* Naming convention should be: <Name> [(<Codename>)] */ +/* This table only is used unless init_<vendor>() below doesn't set it; */ +/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */ + +/* Look up CPU names by table lookup. */ +static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) +{ + struct cpu_model_info *info; + + if ( c->x86_model >= 16 ) + return NULL; /* Range check */ + + if (!this_cpu) + return NULL; + + info = this_cpu->c_models; + + while (info && info->family) { + if (info->family == c->x86) + return info->model_names[c->x86_model]; + info++; + } + return NULL; /* Not found */ +} + + +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) +{ + char *v = c->x86_vendor_id; + int i; + static int printed; + + for (i = 0; i < X86_VENDOR_NUM; i++) { + if (cpu_devs[i]) { + if (!strcmp(v,cpu_devs[i]->c_ident[0]) || + (cpu_devs[i]->c_ident[1] && + !strcmp(v,cpu_devs[i]->c_ident[1]))) { + c->x86_vendor = i; + if (!early) + this_cpu = cpu_devs[i]; + return; + } + } + } + if (!printed) { + printed++; + printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); + printk(KERN_ERR "CPU: Your system may be unstable.\n"); + } + c->x86_vendor = X86_VENDOR_UNKNOWN; + this_cpu = &default_cpu; +} + + +static int __init x86_fxsr_setup(char * s) +{ + /* Tell all the other CPU's to not use it... */ + disable_x86_fxsr = 1; + + /* + * ... and clear the bits early in the boot_cpu_data + * so that the bootup process doesn't try to do this + * either. + */ + clear_bit(X86_FEATURE_FXSR, boot_cpu_data.x86_capability); + clear_bit(X86_FEATURE_XMM, boot_cpu_data.x86_capability); + return 1; +} +__setup("nofxsr", x86_fxsr_setup); + + +static int __init x86_sep_setup(char * s) +{ + disable_x86_sep = 1; + return 1; +} +__setup("nosep", x86_sep_setup); + + +/* Standard macro to see if a specific flag is changeable */ +static inline int flag_is_changeable_p(u32 flag) +{ + u32 f1, f2; + + asm("pushfl\n\t" + "pushfl\n\t" + "popl %0\n\t" + "movl %0,%1\n\t" + "xorl %2,%0\n\t" + "pushl %0\n\t" + "popfl\n\t" + "pushfl\n\t" + "popl %0\n\t" + "popfl\n\t" + : "=&r" (f1), "=&r" (f2) + : "ir" (flag)); + + return ((f1^f2) & flag) != 0; +} + + +/* Probe for the CPUID instruction */ +static int __cpuinit have_cpuid_p(void) +{ + return flag_is_changeable_p(X86_EFLAGS_ID); +} + +void __init cpu_detect(struct cpuinfo_x86 *c) +{ + /* Get vendor name */ + cpuid(0x00000000, &c->cpuid_level, + (int *)&c->x86_vendor_id[0], + (int *)&c->x86_vendor_id[8], + (int *)&c->x86_vendor_id[4]); + + c->x86 = 4; + if (c->cpuid_level >= 0x00000001) { + u32 junk, tfms, cap0, misc; + cpuid(0x00000001, &tfms, &misc, &junk, &cap0); + c->x86 = (tfms >> 8) & 15; + c->x86_model = (tfms >> 4) & 15; + if (c->x86 == 0xf) + c->x86 += (tfms >> 20) & 0xff; + if (c->x86 >= 0x6) + c->x86_model += ((tfms >> 16) & 0xF) << 4; + c->x86_mask = tfms & 15; + if (cap0 & (1<<19)) + c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8; + } +} + +/* Do minimum CPU detection early. + Fields really needed: vendor, cpuid_level, family, model, mask, cache alignment. + The others are not touched to avoid unwanted side effects. + + WARNING: this function is only called on the BP. Don't add code here + that is supposed to run on all CPUs. */ +static void __init early_cpu_detect(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + + c->x86_cache_alignment = 32; + + if (!have_cpuid_p()) + return; + + cpu_detect(c); + + get_cpu_vendor(c, 1); +} + +static void __cpuinit generic_identify(struct cpuinfo_x86 * c) +{ + u32 tfms, xlvl; + int ebx; + + if (have_cpuid_p()) { + /* Get vendor name */ + cpuid(0x00000000, &c->cpuid_level, + (int *)&c->x86_vendor_id[0], + (int *)&c->x86_vendor_id[8], + (int *)&c->x86_vendor_id[4]); + + get_cpu_vendor(c, 0); + /* Initialize the standard set of capabilities */ + /* Note that the vendor-specific code below might override */ + + /* Intel-defined flags: level 0x00000001 */ + if ( c->cpuid_level >= 0x00000001 ) { + u32 capability, excap; + cpuid(0x00000001, &tfms, &ebx, &excap, &capability); + c->x86_capability[0] = capability; + c->x86_capability[4] = excap; + c->x86 = (tfms >> 8) & 15; + c->x86_model = (tfms >> 4) & 15; + if (c->x86 == 0xf) + c->x86 += (tfms >> 20) & 0xff; + if (c->x86 >= 0x6) + c->x86_model += ((tfms >> 16) & 0xF) << 4; + c->x86_mask = tfms & 15; +#ifdef CONFIG_X86_HT + c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0); +#else + c->apicid = (ebx >> 24) & 0xFF; +#endif + if (c->x86_capability[0] & (1<<19)) + c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8; + } else { + /* Have CPUID level 0 only - unheard of */ + c->x86 = 4; + } + + /* AMD-defined flags: level 0x80000001 */ + xlvl = cpuid_eax(0x80000000); + if ( (xlvl & 0xffff0000) == 0x80000000 ) { + if ( xlvl >= 0x80000001 ) { + c->x86_capability[1] = cpuid_edx(0x80000001); + c->x86_capability[6] = cpuid_ecx(0x80000001); + } + if ( xlvl >= 0x80000004 ) + get_model_name(c); /* Default name */ + } + + init_scattered_cpuid_features(c); + } + + early_intel_workaround(c); + +#ifdef CONFIG_X86_HT + c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff; +#endif +} + +static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) +{ + if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) { + /* Disable processor serial number */ + unsigned long lo,hi; + rdmsr(MSR_IA32_BBL_CR_CTL,lo,hi); + lo |= 0x200000; + wrmsr(MSR_IA32_BBL_CR_CTL,lo,hi); + printk(KERN_NOTICE "CPU serial number disabled.\n"); + clear_bit(X86_FEATURE_PN, c->x86_capability); + + /* Disabling the serial number may affect the cpuid level */ + c->cpuid_level = cpuid_eax(0); + } +} + +static int __init x86_serial_nr_setup(char *s) +{ + disable_x86_serial_nr = 0; + return 1; +} +__setup("serialnumber", x86_serial_nr_setup); + + + +/* + * This does the hard work of actually picking apart the CPU stuff... + */ +static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) +{ + int i; + + c->loops_per_jiffy = loops_per_jiffy; + c->x86_cache_size = -1; + c->x86_vendor = X86_VENDOR_UNKNOWN; + c->cpuid_level = -1; /* CPUID not detected */ + c->x86_model = c->x86_mask = 0; /* So far unknown... */ + c->x86_vendor_id[0] = '\0'; /* Unset */ + c->x86_model_id[0] = '\0'; /* Unset */ + c->x86_max_cores = 1; + c->x86_clflush_size = 32; + memset(&c->x86_capability, 0, sizeof c->x86_capability); + + if (!have_cpuid_p()) { + /* First of all, decide if this is a 486 or higher */ + /* It's a 486 if we can modify the AC flag */ + if ( flag_is_changeable_p(X86_EFLAGS_AC) ) + c->x86 = 4; + else + c->x86 = 3; + } + + generic_identify(c); + + printk(KERN_DEBUG "CPU: After generic identify, caps:"); + for (i = 0; i < NCAPINTS; i++) + printk(" %08lx", c->x86_capability[i]); + printk("\n"); + + if (this_cpu->c_identify) { + this_cpu->c_identify(c); + + printk(KERN_DEBUG "CPU: After vendor identify, caps:"); + for (i = 0; i < NCAPINTS; i++) + printk(" %08lx", c->x86_capability[i]); + printk("\n"); + } + + /* + * Vendor-specific initialization. In this section we + * canonicalize the feature flags, meaning if there are + * features a certain CPU supports which CPUID doesn't + * tell us, CPUID claiming incorrect flags, or other bugs, + * we handle them here. + * + * At the end of this section, c->x86_capability better + * indicate the features this CPU genuinely supports! + */ + if (this_cpu->c_init) + this_cpu->c_init(c); + + /* Disable the PN if appropriate */ + squash_the_stupid_serial_number(c); + + /* + * The vendor-specific functions might have changed features. Now + * we do "generic changes." + */ + + /* TSC disabled? */ + if ( tsc_disable ) + clear_bit(X86_FEATURE_TSC, c->x86_capability); + + /* FXSR disabled? */ + if (disable_x86_fxsr) { + clear_bit(X86_FEATURE_FXSR, c->x86_capability); + clear_bit(X86_FEATURE_XMM, c->x86_capability); + } + + /* SEP disabled? */ + if (disable_x86_sep) + clear_bit(X86_FEATURE_SEP, c->x86_capability); + + if (disable_pse) + clear_bit(X86_FEATURE_PSE, c->x86_capability); + + /* If the model name is still unset, do table lookup. */ + if ( !c->x86_model_id[0] ) { + char *p; + p = table_lookup_model(c); + if ( p ) + strcpy(c->x86_model_id, p); + else + /* Last resort... */ + sprintf(c->x86_model_id, "%02x/%02x", + c->x86, c->x86_model); + } + + /* Now the feature flags better reflect actual CPU features! */ + + printk(KERN_DEBUG "CPU: After all inits, caps:"); + for (i = 0; i < NCAPINTS; i++) + printk(" %08lx", c->x86_capability[i]); + printk("\n"); + + /* + * On SMP, boot_cpu_data holds the common feature set between + * all CPUs; so make sure that we indicate which features are + * common between the CPUs. The first time this routine gets + * executed, c == &boot_cpu_data. + */ + if ( c != &boot_cpu_data ) { + /* AND the already accumulated flags with these */ + for ( i = 0 ; i < NCAPINTS ; i++ ) + boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; + } + + /* Init Machine Check Exception if available. */ + mcheck_init(c); +} + +void __init identify_boot_cpu(void) +{ + identify_cpu(&boot_cpu_data); + sysenter_setup(); + enable_sep_cpu(); + mtrr_bp_init(); +} + +void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) +{ + BUG_ON(c == &boot_cpu_data); + identify_cpu(c); + enable_sep_cpu(); + mtrr_ap_init(); +} + +#ifdef CONFIG_X86_HT +void __cpuinit detect_ht(struct cpuinfo_x86 *c) +{ + u32 eax, ebx, ecx, edx; + int index_msb, core_bits; + + cpuid(1, &eax, &ebx, &ecx, &edx); + + if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) + return; + + smp_num_siblings = (ebx & 0xff0000) >> 16; + + if (smp_num_siblings == 1) { + printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); + } else if (smp_num_siblings > 1 ) { + + if (smp_num_siblings > NR_CPUS) { + printk(KERN_WARNING "CPU: Unsupported number of the " + "siblings %d", smp_num_siblings); + smp_num_siblings = 1; + return; + } + + index_msb = get_count_order(smp_num_siblings); + c->phys_proc_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb); + + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", + c->phys_proc_id); + + smp_num_siblings = smp_num_siblings / c->x86_max_cores; + + index_msb = get_count_order(smp_num_siblings) ; + + core_bits = get_count_order(c->x86_max_cores); + + c->cpu_core_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) & + ((1 << core_bits) - 1); + + if (c->x86_max_cores > 1) + printk(KERN_INFO "CPU: Processor Core ID: %d\n", + c->cpu_core_id); + } +} +#endif + +void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) +{ + char *vendor = NULL; + + if (c->x86_vendor < X86_VENDOR_NUM) + vendor = this_cpu->c_vendor; + else if (c->cpuid_level >= 0) + vendor = c->x86_vendor_id; + + if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor))) + printk("%s ", vendor); + + if (!c->x86_model_id[0]) + printk("%d86", c->x86); + else + printk("%s", c->x86_model_id); + + if (c->x86_mask || c->cpuid_level >= 0) + printk(" stepping %02x\n", c->x86_mask); + else + printk("\n"); +} + +cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; + +/* This is hacky. :) + * We're emulating future behavior. + * In the future, the cpu-specific init functions will be called implicitly + * via the magic of initcalls. + * They will insert themselves into the cpu_devs structure. + * Then, when cpu_init() is called, we can just iterate over that array. + */ + +extern int intel_cpu_init(void); +extern int cyrix_init_cpu(void); +extern int nsc_init_cpu(void); +extern int amd_init_cpu(void); +extern int centaur_init_cpu(void); +extern int transmeta_init_cpu(void); +extern int nexgen_init_cpu(void); +extern int umc_init_cpu(void); + +void __init early_cpu_init(void) +{ + intel_cpu_init(); + cyrix_init_cpu(); + nsc_init_cpu(); + amd_init_cpu(); + centaur_init_cpu(); + transmeta_init_cpu(); + nexgen_init_cpu(); + umc_init_cpu(); + early_cpu_detect(); + +#ifdef CONFIG_DEBUG_PAGEALLOC + /* pse is not compatible with on-the-fly unmapping, + * disable it even if the cpus claim to support it. + */ + clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability); + disable_pse = 1; +#endif +} + +/* Make sure %fs is initialized properly in idle threads */ +struct pt_regs * __devinit idle_regs(struct pt_regs *regs) +{ + memset(regs, 0, sizeof(struct pt_regs)); + regs->xfs = __KERNEL_PERCPU; + return regs; +} + +/* Current gdt points %fs at the "master" per-cpu area: after this, + * it's on the real one. */ +void switch_to_new_gdt(void) +{ + struct Xgt_desc_struct gdt_descr; + + gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); + gdt_descr.size = GDT_SIZE - 1; + load_gdt(&gdt_descr); + asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); +} + +/* + * cpu_init() initializes state that is per-CPU. Some data is already + * initialized (naturally) in the bootstrap process, such as the GDT + * and IDT. We reload them nevertheless, this function acts as a + * 'CPU state barrier', nothing should get across. + */ +void __cpuinit cpu_init(void) +{ + int cpu = smp_processor_id(); + struct task_struct *curr = current; + struct tss_struct * t = &per_cpu(init_tss, cpu); + struct thread_struct *thread = &curr->thread; + + if (cpu_test_and_set(cpu, cpu_initialized)) { + printk(KERN_WARNING "CPU#%d already initialized!\n", cpu); + for (;;) local_irq_enable(); + } + + printk(KERN_INFO "Initializing CPU#%d\n", cpu); + + if (cpu_has_vme || cpu_has_tsc || cpu_has_de) + clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); + if (tsc_disable && cpu_has_tsc) { + printk(KERN_NOTICE "Disabling TSC...\n"); + /**** FIX-HPA: DOES THIS REALLY BELONG HERE? ****/ + clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability); + set_in_cr4(X86_CR4_TSD); + } + + load_idt(&idt_descr); + switch_to_new_gdt(); + + /* + * Set up and load the per-CPU TSS and LDT + */ + atomic_inc(&init_mm.mm_count); + curr->active_mm = &init_mm; + if (curr->mm) + BUG(); + enter_lazy_tlb(&init_mm, curr); + + load_esp0(t, thread); + set_tss_desc(cpu,t); + load_TR_desc(); + load_LDT(&init_mm.context); + +#ifdef CONFIG_DOUBLEFAULT + /* Set up doublefault TSS pointer in the GDT */ + __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); +#endif + + /* Clear %gs. */ + asm volatile ("mov %0, %%gs" : : "r" (0)); + + /* Clear all 6 debug registers: */ + set_debugreg(0, 0); + set_debugreg(0, 1); + set_debugreg(0, 2); + set_debugreg(0, 3); + set_debugreg(0, 6); + set_debugreg(0, 7); + + /* + * Force FPU initialization: + */ + current_thread_info()->status = 0; + clear_used_math(); + mxcsr_feature_mask_init(); +} + +#ifdef CONFIG_HOTPLUG_CPU +void __cpuinit cpu_uninit(void) +{ + int cpu = raw_smp_processor_id(); + cpu_clear(cpu, cpu_initialized); + + /* lazy TLB state */ + per_cpu(cpu_tlbstate, cpu).state = 0; + per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; +} +#endif diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h new file mode 100644 index 000000000000..2f6432cef6ff --- /dev/null +++ b/arch/x86/kernel/cpu/cpu.h @@ -0,0 +1,28 @@ + +struct cpu_model_info { + int vendor; + int family; + char *model_names[16]; +}; + +/* attempt to consolidate cpu attributes */ +struct cpu_dev { + char * c_vendor; + + /* some have two possibilities for cpuid string */ + char * c_ident[2]; + + struct cpu_model_info c_models[4]; + + void (*c_init)(struct cpuinfo_x86 * c); + void (*c_identify)(struct cpuinfo_x86 * c); + unsigned int (*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size); +}; + +extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM]; + +extern int get_model_name(struct cpuinfo_x86 *c); +extern void display_cacheinfo(struct cpuinfo_x86 *c); + +extern void early_intel_workaround(struct cpuinfo_x86 *c); + diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig new file mode 100644 index 000000000000..d8c6f132dc7a --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig @@ -0,0 +1,250 @@ +# +# CPU Frequency scaling +# + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +if CPU_FREQ + +comment "CPUFreq processor drivers" + +config X86_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + This driver also supports Intel Enhanced Speedstep. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config ELAN_CPUFREQ + tristate "AMD Elan SC400 and SC410" + select CPU_FREQ_TABLE + depends on X86_ELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC400 and SC410 + processors. + + You need to specify the processor maximum speed as boot + parameter: elanfreq=maxspeed (in kHz) or as module + parameter "max_freq". + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config SC520_CPUFREQ + tristate "AMD Elan SC520" + select CPU_FREQ_TABLE + depends on X86_ELAN + ---help--- + This adds the CPUFreq driver for AMD Elan SC520 processor. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + + +config X86_POWERNOW_K6 + tristate "AMD Mobile K6-2/K6-3 PowerNow!" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for mobile AMD K6-2+ and mobile + AMD K6-3+ processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_POWERNOW_K7 + tristate "AMD Mobile Athlon/Duron PowerNow!" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for mobile AMD K7 mobile processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_POWERNOW_K7_ACPI + bool + depends on X86_POWERNOW_K7 && ACPI_PROCESSOR + depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) + default y + +config X86_POWERNOW_K8 + tristate "AMD Opteron/Athlon64 PowerNow!" + select CPU_FREQ_TABLE + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_POWERNOW_K8_ACPI + bool "ACPI Support" + select ACPI_PROCESSOR + depends on ACPI && X86_POWERNOW_K8 + default y + help + This provides access to the K8s Processor Performance States via ACPI. + This driver is probably required for CPUFreq to work with multi-socket and + SMP systems. It is not required on at least some single-socket yet + multi-core systems, even if SMP is enabled. + + It is safe to say Y here. + +config X86_GX_SUSPMOD + tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" + depends on PCI + help + This add the CPUFreq driver for NatSemi Geode processors which + support suspend modulation. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_CENTRINO + tristate "Intel Enhanced SpeedStep" + select CPU_FREQ_TABLE + select X86_SPEEDSTEP_CENTRINO_TABLE + help + This adds the CPUFreq driver for Enhanced SpeedStep enabled + mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However, + you also need to say Y to "Use ACPI tables to decode..." below + [which might imply enabling ACPI] if you want to use this driver + on non-Banias CPUs. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_CENTRINO_TABLE + bool "Built-in tables for Banias CPUs" + depends on X86_SPEEDSTEP_CENTRINO + default y + help + Use built-in tables for Banias CPUs if ACPI encoding + is not available. + + If in doubt, say N. + +config X86_SPEEDSTEP_ICH + tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for certain mobile Intel Pentium III + (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all + mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, + ICH3 or ICH4 southbridge. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_SPEEDSTEP_SMI + tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" + select CPU_FREQ_TABLE + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for certain mobile Intel Pentium III + (Coppermine), all mobile Intel Pentium III-M (Tualatin) + on systems which have an Intel 440BX/ZX/MX southbridge. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_P4_CLOCKMOD + tristate "Intel Pentium 4 clock modulation" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for Intel Pentium 4 / XEON + processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_CPUFREQ_NFORCE2 + tristate "nVidia nForce2 FSB changing" + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for FSB changing on nVidia nForce2 + platforms. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_LONGRUN + tristate "Transmeta LongRun" + help + This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors + which support LongRun. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_LONGHAUL + tristate "VIA Cyrix III Longhaul" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This adds the CPUFreq driver for VIA Samuel/CyrixIII, + VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T + processors. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_E_POWERSAVER + tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" + select CPU_FREQ_TABLE + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for VIA C7 processors. + + If in doubt, say N. + +comment "shared options" + +config X86_ACPI_CPUFREQ_PROC_INTF + bool "/proc/acpi/processor/../performance interface (deprecated)" + depends on PROC_FS + depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI + help + This enables the deprecated /proc/acpi/processor/../performance + interface. While it is helpful for debugging, the generic, + cross-architecture cpufreq interfaces should be used. + + If in doubt, say N. + +config X86_SPEEDSTEP_LIB + tristate + default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD + +config X86_SPEEDSTEP_RELAXED_CAP_CHECK + bool "Relaxed speedstep capability checks" + depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) + help + Don't perform all checks for a speedstep capable system which would + normally be done. Some ancient or strange systems, though speedstep + capable, don't always indicate that they are speedstep capable. This + option lets the probing code bypass some of those checks if the + parameter "relaxed_check=1" is passed to the module. + +endif # CPU_FREQ + +endmenu diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile new file mode 100644 index 000000000000..560f7760dae5 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/Makefile @@ -0,0 +1,16 @@ +obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o +obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o +obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o +obj-$(CONFIG_X86_LONGHAUL) += longhaul.o +obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o +obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o +obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o +obj-$(CONFIG_X86_LONGRUN) += longrun.o +obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o +obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o +obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o +obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o +obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o +obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o +obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o +obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c new file mode 100644 index 000000000000..b6434a7ef8b2 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -0,0 +1,799 @@ +/* + * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.4 $) + * + * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> + * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> + * Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de> + * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/sched.h> +#include <linux/cpufreq.h> +#include <linux/compiler.h> +#include <linux/dmi.h> + +#include <linux/acpi.h> +#include <acpi/processor.h> + +#include <asm/io.h> +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpufeature.h> +#include <asm/delay.h> +#include <asm/uaccess.h> + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg) + +MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); +MODULE_DESCRIPTION("ACPI Processor P-States Driver"); +MODULE_LICENSE("GPL"); + +enum { + UNDEFINED_CAPABLE = 0, + SYSTEM_INTEL_MSR_CAPABLE, + SYSTEM_IO_CAPABLE, +}; + +#define INTEL_MSR_RANGE (0xffff) +#define CPUID_6_ECX_APERFMPERF_CAPABILITY (0x1) + +struct acpi_cpufreq_data { + struct acpi_processor_performance *acpi_data; + struct cpufreq_frequency_table *freq_table; + unsigned int max_freq; + unsigned int resume; + unsigned int cpu_feature; +}; + +static struct acpi_cpufreq_data *drv_data[NR_CPUS]; +/* acpi_perf_data is a pointer to percpu data. */ +static struct acpi_processor_performance *acpi_perf_data; + +static struct cpufreq_driver acpi_cpufreq_driver; + +static unsigned int acpi_pstate_strict; + +static int check_est_cpu(unsigned int cpuid) +{ + struct cpuinfo_x86 *cpu = &cpu_data[cpuid]; + + if (cpu->x86_vendor != X86_VENDOR_INTEL || + !cpu_has(cpu, X86_FEATURE_EST)) + return 0; + + return 1; +} + +static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) +{ + struct acpi_processor_performance *perf; + int i; + + perf = data->acpi_data; + + for (i=0; i<perf->state_count; i++) { + if (value == perf->states[i].status) + return data->freq_table[i].frequency; + } + return 0; +} + +static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) +{ + int i; + struct acpi_processor_performance *perf; + + msr &= INTEL_MSR_RANGE; + perf = data->acpi_data; + + for (i=0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { + if (msr == perf->states[data->freq_table[i].index].status) + return data->freq_table[i].frequency; + } + return data->freq_table[0].frequency; +} + +static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data) +{ + switch (data->cpu_feature) { + case SYSTEM_INTEL_MSR_CAPABLE: + return extract_msr(val, data); + case SYSTEM_IO_CAPABLE: + return extract_io(val, data); + default: + return 0; + } +} + +struct msr_addr { + u32 reg; +}; + +struct io_addr { + u16 port; + u8 bit_width; +}; + +typedef union { + struct msr_addr msr; + struct io_addr io; +} drv_addr_union; + +struct drv_cmd { + unsigned int type; + cpumask_t mask; + drv_addr_union addr; + u32 val; +}; + +static void do_drv_read(struct drv_cmd *cmd) +{ + u32 h; + + switch (cmd->type) { + case SYSTEM_INTEL_MSR_CAPABLE: + rdmsr(cmd->addr.msr.reg, cmd->val, h); + break; + case SYSTEM_IO_CAPABLE: + acpi_os_read_port((acpi_io_address)cmd->addr.io.port, + &cmd->val, + (u32)cmd->addr.io.bit_width); + break; + default: + break; + } +} + +static void do_drv_write(struct drv_cmd *cmd) +{ + u32 lo, hi; + + switch (cmd->type) { + case SYSTEM_INTEL_MSR_CAPABLE: + rdmsr(cmd->addr.msr.reg, lo, hi); + lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE); + wrmsr(cmd->addr.msr.reg, lo, hi); + break; + case SYSTEM_IO_CAPABLE: + acpi_os_write_port((acpi_io_address)cmd->addr.io.port, + cmd->val, + (u32)cmd->addr.io.bit_width); + break; + default: + break; + } +} + +static void drv_read(struct drv_cmd *cmd) +{ + cpumask_t saved_mask = current->cpus_allowed; + cmd->val = 0; + + set_cpus_allowed(current, cmd->mask); + do_drv_read(cmd); + set_cpus_allowed(current, saved_mask); +} + +static void drv_write(struct drv_cmd *cmd) +{ + cpumask_t saved_mask = current->cpus_allowed; + unsigned int i; + + for_each_cpu_mask(i, cmd->mask) { + set_cpus_allowed(current, cpumask_of_cpu(i)); + do_drv_write(cmd); + } + + set_cpus_allowed(current, saved_mask); + return; +} + +static u32 get_cur_val(cpumask_t mask) +{ + struct acpi_processor_performance *perf; + struct drv_cmd cmd; + + if (unlikely(cpus_empty(mask))) + return 0; + + switch (drv_data[first_cpu(mask)]->cpu_feature) { + case SYSTEM_INTEL_MSR_CAPABLE: + cmd.type = SYSTEM_INTEL_MSR_CAPABLE; + cmd.addr.msr.reg = MSR_IA32_PERF_STATUS; + break; + case SYSTEM_IO_CAPABLE: + cmd.type = SYSTEM_IO_CAPABLE; + perf = drv_data[first_cpu(mask)]->acpi_data; + cmd.addr.io.port = perf->control_register.address; + cmd.addr.io.bit_width = perf->control_register.bit_width; + break; + default: + return 0; + } + + cmd.mask = mask; + + drv_read(&cmd); + + dprintk("get_cur_val = %u\n", cmd.val); + + return cmd.val; +} + +/* + * Return the measured active (C0) frequency on this CPU since last call + * to this function. + * Input: cpu number + * Return: Average CPU frequency in terms of max frequency (zero on error) + * + * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance + * over a period of time, while CPU is in C0 state. + * IA32_MPERF counts at the rate of max advertised frequency + * IA32_APERF counts at the rate of actual CPU frequency + * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and + * no meaning should be associated with absolute values of these MSRs. + */ +static unsigned int get_measured_perf(unsigned int cpu) +{ + union { + struct { + u32 lo; + u32 hi; + } split; + u64 whole; + } aperf_cur, mperf_cur; + + cpumask_t saved_mask; + unsigned int perf_percent; + unsigned int retval; + + saved_mask = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + if (get_cpu() != cpu) { + /* We were not able to run on requested processor */ + put_cpu(); + return 0; + } + + rdmsr(MSR_IA32_APERF, aperf_cur.split.lo, aperf_cur.split.hi); + rdmsr(MSR_IA32_MPERF, mperf_cur.split.lo, mperf_cur.split.hi); + + wrmsr(MSR_IA32_APERF, 0,0); + wrmsr(MSR_IA32_MPERF, 0,0); + +#ifdef __i386__ + /* + * We dont want to do 64 bit divide with 32 bit kernel + * Get an approximate value. Return failure in case we cannot get + * an approximate value. + */ + if (unlikely(aperf_cur.split.hi || mperf_cur.split.hi)) { + int shift_count; + u32 h; + + h = max_t(u32, aperf_cur.split.hi, mperf_cur.split.hi); + shift_count = fls(h); + + aperf_cur.whole >>= shift_count; + mperf_cur.whole >>= shift_count; + } + + if (((unsigned long)(-1) / 100) < aperf_cur.split.lo) { + int shift_count = 7; + aperf_cur.split.lo >>= shift_count; + mperf_cur.split.lo >>= shift_count; + } + + if (aperf_cur.split.lo && mperf_cur.split.lo) + perf_percent = (aperf_cur.split.lo * 100) / mperf_cur.split.lo; + else + perf_percent = 0; + +#else + if (unlikely(((unsigned long)(-1) / 100) < aperf_cur.whole)) { + int shift_count = 7; + aperf_cur.whole >>= shift_count; + mperf_cur.whole >>= shift_count; + } + + if (aperf_cur.whole && mperf_cur.whole) + perf_percent = (aperf_cur.whole * 100) / mperf_cur.whole; + else + perf_percent = 0; + +#endif + + retval = drv_data[cpu]->max_freq * perf_percent / 100; + + put_cpu(); + set_cpus_allowed(current, saved_mask); + + dprintk("cpu %d: performance percent %d\n", cpu, perf_percent); + return retval; +} + +static unsigned int get_cur_freq_on_cpu(unsigned int cpu) +{ + struct acpi_cpufreq_data *data = drv_data[cpu]; + unsigned int freq; + + dprintk("get_cur_freq_on_cpu (%d)\n", cpu); + + if (unlikely(data == NULL || + data->acpi_data == NULL || data->freq_table == NULL)) { + return 0; + } + + freq = extract_freq(get_cur_val(cpumask_of_cpu(cpu)), data); + dprintk("cur freq = %u\n", freq); + + return freq; +} + +static unsigned int check_freqs(cpumask_t mask, unsigned int freq, + struct acpi_cpufreq_data *data) +{ + unsigned int cur_freq; + unsigned int i; + + for (i=0; i<100; i++) { + cur_freq = extract_freq(get_cur_val(mask), data); + if (cur_freq == freq) + return 1; + udelay(10); + } + return 0; +} + +static int acpi_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + struct acpi_cpufreq_data *data = drv_data[policy->cpu]; + struct acpi_processor_performance *perf; + struct cpufreq_freqs freqs; + cpumask_t online_policy_cpus; + struct drv_cmd cmd; + unsigned int next_state = 0; /* Index into freq_table */ + unsigned int next_perf_state = 0; /* Index into perf table */ + unsigned int i; + int result = 0; + + dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu); + + if (unlikely(data == NULL || + data->acpi_data == NULL || data->freq_table == NULL)) { + return -ENODEV; + } + + perf = data->acpi_data; + result = cpufreq_frequency_table_target(policy, + data->freq_table, + target_freq, + relation, &next_state); + if (unlikely(result)) + return -ENODEV; + +#ifdef CONFIG_HOTPLUG_CPU + /* cpufreq holds the hotplug lock, so we are safe from here on */ + cpus_and(online_policy_cpus, cpu_online_map, policy->cpus); +#else + online_policy_cpus = policy->cpus; +#endif + + next_perf_state = data->freq_table[next_state].index; + if (perf->state == next_perf_state) { + if (unlikely(data->resume)) { + dprintk("Called after resume, resetting to P%d\n", + next_perf_state); + data->resume = 0; + } else { + dprintk("Already at target state (P%d)\n", + next_perf_state); + return 0; + } + } + + switch (data->cpu_feature) { + case SYSTEM_INTEL_MSR_CAPABLE: + cmd.type = SYSTEM_INTEL_MSR_CAPABLE; + cmd.addr.msr.reg = MSR_IA32_PERF_CTL; + cmd.val = (u32) perf->states[next_perf_state].control; + break; + case SYSTEM_IO_CAPABLE: + cmd.type = SYSTEM_IO_CAPABLE; + cmd.addr.io.port = perf->control_register.address; + cmd.addr.io.bit_width = perf->control_register.bit_width; + cmd.val = (u32) perf->states[next_perf_state].control; + break; + default: + return -ENODEV; + } + + cpus_clear(cmd.mask); + + if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY) + cmd.mask = online_policy_cpus; + else + cpu_set(policy->cpu, cmd.mask); + + freqs.old = perf->states[perf->state].core_frequency * 1000; + freqs.new = data->freq_table[next_state].frequency; + for_each_cpu_mask(i, cmd.mask) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } + + drv_write(&cmd); + + if (acpi_pstate_strict) { + if (!check_freqs(cmd.mask, freqs.new, data)) { + dprintk("acpi_cpufreq_target failed (%d)\n", + policy->cpu); + return -EAGAIN; + } + } + + for_each_cpu_mask(i, cmd.mask) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + perf->state = next_perf_state; + + return result; +} + +static int acpi_cpufreq_verify(struct cpufreq_policy *policy) +{ + struct acpi_cpufreq_data *data = drv_data[policy->cpu]; + + dprintk("acpi_cpufreq_verify\n"); + + return cpufreq_frequency_table_verify(policy, data->freq_table); +} + +static unsigned long +acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) +{ + struct acpi_processor_performance *perf = data->acpi_data; + + if (cpu_khz) { + /* search the closest match to cpu_khz */ + unsigned int i; + unsigned long freq; + unsigned long freqn = perf->states[0].core_frequency * 1000; + + for (i=0; i<(perf->state_count-1); i++) { + freq = freqn; + freqn = perf->states[i+1].core_frequency * 1000; + if ((2 * cpu_khz) > (freqn + freq)) { + perf->state = i; + return freq; + } + } + perf->state = perf->state_count-1; + return freqn; + } else { + /* assume CPU is at P0... */ + perf->state = 0; + return perf->states[0].core_frequency * 1000; + } +} + +/* + * acpi_cpufreq_early_init - initialize ACPI P-States library + * + * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c) + * in order to determine correct frequency and voltage pairings. We can + * do _PDC and _PSD and find out the processor dependency for the + * actual init that will happen later... + */ +static int __init acpi_cpufreq_early_init(void) +{ + dprintk("acpi_cpufreq_early_init\n"); + + acpi_perf_data = alloc_percpu(struct acpi_processor_performance); + if (!acpi_perf_data) { + dprintk("Memory allocation error for acpi_perf_data.\n"); + return -ENOMEM; + } + + /* Do initialization in ACPI core */ + acpi_processor_preregister_performance(acpi_perf_data); + return 0; +} + +#ifdef CONFIG_SMP +/* + * Some BIOSes do SW_ANY coordination internally, either set it up in hw + * or do it in BIOS firmware and won't inform about it to OS. If not + * detected, this has a side effect of making CPU run at a different speed + * than OS intended it to run at. Detect it and handle it cleanly. + */ +static int bios_with_sw_any_bug; + +static int sw_any_bug_found(const struct dmi_system_id *d) +{ + bios_with_sw_any_bug = 1; + return 0; +} + +static const struct dmi_system_id sw_any_bug_dmi_table[] = { + { + .callback = sw_any_bug_found, + .ident = "Supermicro Server X6DLP", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), + DMI_MATCH(DMI_BIOS_VERSION, "080010"), + DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"), + }, + }, + { } +}; +#endif + +static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int i; + unsigned int valid_states = 0; + unsigned int cpu = policy->cpu; + struct acpi_cpufreq_data *data; + unsigned int result = 0; + struct cpuinfo_x86 *c = &cpu_data[policy->cpu]; + struct acpi_processor_performance *perf; + + dprintk("acpi_cpufreq_cpu_init\n"); + + data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->acpi_data = percpu_ptr(acpi_perf_data, cpu); + drv_data[cpu] = data; + + if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) + acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS; + + result = acpi_processor_register_performance(data->acpi_data, cpu); + if (result) + goto err_free; + + perf = data->acpi_data; + policy->shared_type = perf->shared_type; + + /* + * Will let policy->cpus know about dependency only when software + * coordination is required. + */ + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL || + policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { + policy->cpus = perf->shared_cpu_map; + } + +#ifdef CONFIG_SMP + dmi_check_system(sw_any_bug_dmi_table); + if (bios_with_sw_any_bug && cpus_weight(policy->cpus) == 1) { + policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; + policy->cpus = cpu_core_map[cpu]; + } +#endif + + /* capability check */ + if (perf->state_count <= 1) { + dprintk("No P-States\n"); + result = -ENODEV; + goto err_unreg; + } + + if (perf->control_register.space_id != perf->status_register.space_id) { + result = -ENODEV; + goto err_unreg; + } + + switch (perf->control_register.space_id) { + case ACPI_ADR_SPACE_SYSTEM_IO: + dprintk("SYSTEM IO addr space\n"); + data->cpu_feature = SYSTEM_IO_CAPABLE; + break; + case ACPI_ADR_SPACE_FIXED_HARDWARE: + dprintk("HARDWARE addr space\n"); + if (!check_est_cpu(cpu)) { + result = -ENODEV; + goto err_unreg; + } + data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE; + break; + default: + dprintk("Unknown addr space %d\n", + (u32) (perf->control_register.space_id)); + result = -ENODEV; + goto err_unreg; + } + + data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * + (perf->state_count+1), GFP_KERNEL); + if (!data->freq_table) { + result = -ENOMEM; + goto err_unreg; + } + + /* detect transition latency */ + policy->cpuinfo.transition_latency = 0; + for (i=0; i<perf->state_count; i++) { + if ((perf->states[i].transition_latency * 1000) > + policy->cpuinfo.transition_latency) + policy->cpuinfo.transition_latency = + perf->states[i].transition_latency * 1000; + } + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + data->max_freq = perf->states[0].core_frequency * 1000; + /* table init */ + for (i=0; i<perf->state_count; i++) { + if (i>0 && perf->states[i].core_frequency >= + data->freq_table[valid_states-1].frequency / 1000) + continue; + + data->freq_table[valid_states].index = i; + data->freq_table[valid_states].frequency = + perf->states[i].core_frequency * 1000; + valid_states++; + } + data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END; + perf->state = 0; + + result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table); + if (result) + goto err_freqfree; + + switch (perf->control_register.space_id) { + case ACPI_ADR_SPACE_SYSTEM_IO: + /* Current speed is unknown and not detectable by IO port */ + policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu); + break; + case ACPI_ADR_SPACE_FIXED_HARDWARE: + acpi_cpufreq_driver.get = get_cur_freq_on_cpu; + policy->cur = get_cur_freq_on_cpu(cpu); + break; + default: + break; + } + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + /* Check for APERF/MPERF support in hardware */ + if (c->x86_vendor == X86_VENDOR_INTEL && c->cpuid_level >= 6) { + unsigned int ecx; + ecx = cpuid_ecx(6); + if (ecx & CPUID_6_ECX_APERFMPERF_CAPABILITY) + acpi_cpufreq_driver.getavg = get_measured_perf; + } + + dprintk("CPU%u - ACPI performance management activated.\n", cpu); + for (i = 0; i < perf->state_count; i++) + dprintk(" %cP%d: %d MHz, %d mW, %d uS\n", + (i == perf->state ? '*' : ' '), i, + (u32) perf->states[i].core_frequency, + (u32) perf->states[i].power, + (u32) perf->states[i].transition_latency); + + cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); + + /* + * the first call to ->target() should result in us actually + * writing something to the appropriate registers. + */ + data->resume = 1; + + return result; + +err_freqfree: + kfree(data->freq_table); +err_unreg: + acpi_processor_unregister_performance(perf, cpu); +err_free: + kfree(data); + drv_data[cpu] = NULL; + + return result; +} + +static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + struct acpi_cpufreq_data *data = drv_data[policy->cpu]; + + dprintk("acpi_cpufreq_cpu_exit\n"); + + if (data) { + cpufreq_frequency_table_put_attr(policy->cpu); + drv_data[policy->cpu] = NULL; + acpi_processor_unregister_performance(data->acpi_data, + policy->cpu); + kfree(data); + } + + return 0; +} + +static int acpi_cpufreq_resume(struct cpufreq_policy *policy) +{ + struct acpi_cpufreq_data *data = drv_data[policy->cpu]; + + dprintk("acpi_cpufreq_resume\n"); + + data->resume = 1; + + return 0; +} + +static struct freq_attr *acpi_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver acpi_cpufreq_driver = { + .verify = acpi_cpufreq_verify, + .target = acpi_cpufreq_target, + .init = acpi_cpufreq_cpu_init, + .exit = acpi_cpufreq_cpu_exit, + .resume = acpi_cpufreq_resume, + .name = "acpi-cpufreq", + .owner = THIS_MODULE, + .attr = acpi_cpufreq_attr, +}; + +static int __init acpi_cpufreq_init(void) +{ + int ret; + + dprintk("acpi_cpufreq_init\n"); + + ret = acpi_cpufreq_early_init(); + if (ret) + return ret; + + return cpufreq_register_driver(&acpi_cpufreq_driver); +} + +static void __exit acpi_cpufreq_exit(void) +{ + dprintk("acpi_cpufreq_exit\n"); + + cpufreq_unregister_driver(&acpi_cpufreq_driver); + + free_percpu(acpi_perf_data); + + return; +} + +module_param(acpi_pstate_strict, uint, 0644); +MODULE_PARM_DESC(acpi_pstate_strict, + "value 0 or non-zero. non-zero -> strict ACPI checks are " + "performed during frequency changes."); + +late_initcall(acpi_cpufreq_init); +module_exit(acpi_cpufreq_exit); + +MODULE_ALIAS("acpi"); diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c new file mode 100644 index 000000000000..66acd5039918 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -0,0 +1,441 @@ +/* + * (C) 2004-2006 Sebastian Witt <se.witt@gmx.net> + * + * Licensed under the terms of the GNU GPL License version 2. + * Based upon reverse engineered information + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/delay.h> + +#define NFORCE2_XTAL 25 +#define NFORCE2_BOOTFSB 0x48 +#define NFORCE2_PLLENABLE 0xa8 +#define NFORCE2_PLLREG 0xa4 +#define NFORCE2_PLLADR 0xa0 +#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div) + +#define NFORCE2_MIN_FSB 50 +#define NFORCE2_SAFE_DISTANCE 50 + +/* Delay in ms between FSB changes */ +//#define NFORCE2_DELAY 10 + +/* nforce2_chipset: + * FSB is changed using the chipset + */ +static struct pci_dev *nforce2_chipset_dev; + +/* fid: + * multiplier * 10 + */ +static int fid = 0; + +/* min_fsb, max_fsb: + * minimum and maximum FSB (= FSB at boot time) + */ +static int min_fsb = 0; +static int max_fsb = 0; + +MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); +MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); +MODULE_LICENSE("GPL"); + +module_param(fid, int, 0444); +module_param(min_fsb, int, 0444); + +MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); +MODULE_PARM_DESC(min_fsb, + "Minimum FSB to use, if not defined: current FSB - 50"); + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) + +/** + * nforce2_calc_fsb - calculate FSB + * @pll: PLL value + * + * Calculates FSB from PLL value + */ +static int nforce2_calc_fsb(int pll) +{ + unsigned char mul, div; + + mul = (pll >> 8) & 0xff; + div = pll & 0xff; + + if (div > 0) + return NFORCE2_XTAL * mul / div; + + return 0; +} + +/** + * nforce2_calc_pll - calculate PLL value + * @fsb: FSB + * + * Calculate PLL value for given FSB + */ +static int nforce2_calc_pll(unsigned int fsb) +{ + unsigned char xmul, xdiv; + unsigned char mul = 0, div = 0; + int tried = 0; + + /* Try to calculate multiplier and divider up to 4 times */ + while (((mul == 0) || (div == 0)) && (tried <= 3)) { + for (xdiv = 2; xdiv <= 0x80; xdiv++) + for (xmul = 1; xmul <= 0xfe; xmul++) + if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) == + fsb + tried) { + mul = xmul; + div = xdiv; + } + tried++; + } + + if ((mul == 0) || (div == 0)) + return -1; + + return NFORCE2_PLL(mul, div); +} + +/** + * nforce2_write_pll - write PLL value to chipset + * @pll: PLL value + * + * Writes new FSB PLL value to chipset + */ +static void nforce2_write_pll(int pll) +{ + int temp; + + /* Set the pll addr. to 0x00 */ + pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, 0); + + /* Now write the value in all 64 registers */ + for (temp = 0; temp <= 0x3f; temp++) + pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll); + + return; +} + +/** + * nforce2_fsb_read - Read FSB + * + * Read FSB from chipset + * If bootfsb != 0, return FSB at boot-time + */ +static unsigned int nforce2_fsb_read(int bootfsb) +{ + struct pci_dev *nforce2_sub5; + u32 fsb, temp = 0; + + /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ + nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, + 0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL); + if (!nforce2_sub5) + return 0; + + pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); + fsb /= 1000000; + + /* Check if PLL register is already set */ + pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + + if(bootfsb || !temp) + return fsb; + + /* Use PLL register FSB value */ + pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp); + fsb = nforce2_calc_fsb(temp); + + return fsb; +} + +/** + * nforce2_set_fsb - set new FSB + * @fsb: New FSB + * + * Sets new FSB + */ +static int nforce2_set_fsb(unsigned int fsb) +{ + u32 temp = 0; + unsigned int tfsb; + int diff; + int pll = 0; + + if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { + printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb); + return -EINVAL; + } + + tfsb = nforce2_fsb_read(0); + if (!tfsb) { + printk(KERN_ERR "cpufreq: Error while reading the FSB\n"); + return -EINVAL; + } + + /* First write? Then set actual value */ + pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); + if (!temp) { + pll = nforce2_calc_pll(tfsb); + + if (pll < 0) + return -EINVAL; + + nforce2_write_pll(pll); + } + + /* Enable write access */ + temp = 0x01; + pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp); + + diff = tfsb - fsb; + + if (!diff) + return 0; + + while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) { + if (diff < 0) + tfsb++; + else + tfsb--; + + /* Calculate the PLL reg. value */ + if ((pll = nforce2_calc_pll(tfsb)) == -1) + return -EINVAL; + + nforce2_write_pll(pll); +#ifdef NFORCE2_DELAY + mdelay(NFORCE2_DELAY); +#endif + } + + temp = 0x40; + pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp); + + return 0; +} + +/** + * nforce2_get - get the CPU frequency + * @cpu: CPU number + * + * Returns the CPU frequency + */ +static unsigned int nforce2_get(unsigned int cpu) +{ + if (cpu) + return 0; + return nforce2_fsb_read(0) * fid * 100; +} + +/** + * nforce2_target - set a new CPUFreq policy + * @policy: new policy + * @target_freq: the target frequency + * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * + * Sets a new CPUFreq policy. + */ +static int nforce2_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ +// unsigned long flags; + struct cpufreq_freqs freqs; + unsigned int target_fsb; + + if ((target_freq > policy->max) || (target_freq < policy->min)) + return -EINVAL; + + target_fsb = target_freq / (fid * 100); + + freqs.old = nforce2_get(policy->cpu); + freqs.new = target_fsb * fid * 100; + freqs.cpu = 0; /* Only one CPU on nForce2 plattforms */ + + if (freqs.old == freqs.new) + return 0; + + dprintk("Old CPU frequency %d kHz, new %d kHz\n", + freqs.old, freqs.new); + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Disable IRQs */ + //local_irq_save(flags); + + if (nforce2_set_fsb(target_fsb) < 0) + printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n", + target_fsb); + else + dprintk("Changed FSB successfully to %d\n", + target_fsb); + + /* Enable IRQs */ + //local_irq_restore(flags); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +/** + * nforce2_verify - verifies a new CPUFreq policy + * @policy: new policy + */ +static int nforce2_verify(struct cpufreq_policy *policy) +{ + unsigned int fsb_pol_max; + + fsb_pol_max = policy->max / (fid * 100); + + if (policy->min < (fsb_pol_max * fid * 100)) + policy->max = (fsb_pol_max + 1) * fid * 100; + + cpufreq_verify_within_limits(policy, + policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + return 0; +} + +static int nforce2_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int fsb; + unsigned int rfid; + + /* capability check */ + if (policy->cpu != 0) + return -ENODEV; + + /* Get current FSB */ + fsb = nforce2_fsb_read(0); + + if (!fsb) + return -EIO; + + /* FIX: Get FID from CPU */ + if (!fid) { + if (!cpu_khz) { + printk(KERN_WARNING + "cpufreq: cpu_khz not set, can't calculate multiplier!\n"); + return -ENODEV; + } + + fid = cpu_khz / (fsb * 100); + rfid = fid % 5; + + if (rfid) { + if (rfid > 2) + fid += 5 - rfid; + else + fid -= rfid; + } + } + + printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb, + fid / 10, fid % 10); + + /* Set maximum FSB to FSB at boot time */ + max_fsb = nforce2_fsb_read(1); + + if(!max_fsb) + return -EIO; + + if (!min_fsb) + min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE; + + if (min_fsb < NFORCE2_MIN_FSB) + min_fsb = NFORCE2_MIN_FSB; + + /* cpuinfo and default policy values */ + policy->cpuinfo.min_freq = min_fsb * fid * 100; + policy->cpuinfo.max_freq = max_fsb * fid * 100; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = nforce2_get(policy->cpu); + policy->min = policy->cpuinfo.min_freq; + policy->max = policy->cpuinfo.max_freq; + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + return 0; +} + +static int nforce2_cpu_exit(struct cpufreq_policy *policy) +{ + return 0; +} + +static struct cpufreq_driver nforce2_driver = { + .name = "nforce2", + .verify = nforce2_verify, + .target = nforce2_target, + .get = nforce2_get, + .init = nforce2_cpu_init, + .exit = nforce2_cpu_exit, + .owner = THIS_MODULE, +}; + +/** + * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic + * + * Detects nForce2 A2 and C1 stepping + * + */ +static unsigned int nforce2_detect_chipset(void) +{ + nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NFORCE2, + PCI_ANY_ID, PCI_ANY_ID, NULL); + + if (nforce2_chipset_dev == NULL) + return -ENODEV; + + printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n", + nforce2_chipset_dev->revision); + printk(KERN_INFO + "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n"); + + return 0; +} + +/** + * nforce2_init - initializes the nForce2 CPUFreq driver + * + * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported + * devices, -EINVAL on problems during initiatization, and zero on + * success. + */ +static int __init nforce2_init(void) +{ + /* TODO: do we need to detect the processor? */ + + /* detect chipset */ + if (nforce2_detect_chipset()) { + printk(KERN_ERR "cpufreq: No nForce2 chipset.\n"); + return -ENODEV; + } + + return cpufreq_register_driver(&nforce2_driver); +} + +/** + * nforce2_exit - unregisters cpufreq module + * + * Unregisters nForce2 FSB change support. + */ +static void __exit nforce2_exit(void) +{ + cpufreq_unregister_driver(&nforce2_driver); +} + +module_init(nforce2_init); +module_exit(nforce2_exit); + diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c new file mode 100644 index 000000000000..f43d98e11cc7 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c @@ -0,0 +1,334 @@ +/* + * Based on documentation provided by Dave Jones. Thanks! + * + * Licensed under the terms of the GNU GPL License version 2. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/ioport.h> +#include <linux/slab.h> + +#include <asm/msr.h> +#include <asm/tsc.h> +#include <asm/timex.h> +#include <asm/io.h> +#include <asm/delay.h> + +#define EPS_BRAND_C7M 0 +#define EPS_BRAND_C7 1 +#define EPS_BRAND_EDEN 2 +#define EPS_BRAND_C3 3 + +struct eps_cpu_data { + u32 fsb; + struct cpufreq_frequency_table freq_table[]; +}; + +static struct eps_cpu_data *eps_cpu[NR_CPUS]; + + +static unsigned int eps_get(unsigned int cpu) +{ + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (cpu) + return 0; + centaur = eps_cpu[cpu]; + if (centaur == NULL) + return 0; + + /* Return current frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + return centaur->fsb * ((lo >> 8) & 0xff); +} + +static int eps_set_state(struct eps_cpu_data *centaur, + unsigned int cpu, + u32 dest_state) +{ + struct cpufreq_freqs freqs; + u32 lo, hi; + int err = 0; + int i; + + freqs.old = eps_get(cpu); + freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff); + freqs.cpu = cpu; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Wait while CPU is busy */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i = 0; + while (lo & ((1 << 16) | (1 << 17))) { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + err = -ENODEV; + goto postchange; + } + } + /* Set new multiplier and voltage */ + wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); + /* Wait until transition end */ + i = 0; + do { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + err = -ENODEV; + goto postchange; + } + } while (lo & ((1 << 16) | (1 << 17))); + + /* Return current frequency */ +postchange: + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + freqs.new = centaur->fsb * ((lo >> 8) & 0xff); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + return err; +} + +static int eps_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct eps_cpu_data *centaur; + unsigned int newstate = 0; + unsigned int cpu = policy->cpu; + unsigned int dest_state; + int ret; + + if (unlikely(eps_cpu[cpu] == NULL)) + return -ENODEV; + centaur = eps_cpu[cpu]; + + if (unlikely(cpufreq_frequency_table_target(policy, + &eps_cpu[cpu]->freq_table[0], + target_freq, + relation, + &newstate))) { + return -EINVAL; + } + + /* Make frequency transition */ + dest_state = centaur->freq_table[newstate].index & 0xffff; + ret = eps_set_state(centaur, cpu, dest_state); + if (ret) + printk(KERN_ERR "eps: Timeout!\n"); + return ret; +} + +static int eps_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, + &eps_cpu[policy->cpu]->freq_table[0]); +} + +static int eps_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int i; + u32 lo, hi; + u64 val; + u8 current_multiplier, current_voltage; + u8 max_multiplier, max_voltage; + u8 min_multiplier, min_voltage; + u8 brand; + u32 fsb; + struct eps_cpu_data *centaur; + struct cpufreq_frequency_table *f_table; + int k, step, voltage; + int ret; + int states; + + if (policy->cpu != 0) + return -ENODEV; + + /* Check brand */ + printk("eps: Detected VIA "); + rdmsr(0x1153, lo, hi); + brand = (((lo >> 2) ^ lo) >> 18) & 3; + switch(brand) { + case EPS_BRAND_C7M: + printk("C7-M\n"); + break; + case EPS_BRAND_C7: + printk("C7\n"); + break; + case EPS_BRAND_EDEN: + printk("Eden\n"); + break; + case EPS_BRAND_C3: + printk("C3\n"); + return -ENODEV; + break; + } + /* Enable Enhanced PowerSaver */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & 1 << 16)) { + val |= 1 << 16; + wrmsrl(MSR_IA32_MISC_ENABLE, val); + /* Can be locked at 0 */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & 1 << 16)) { + printk("eps: Can't enable Enhanced PowerSaver\n"); + return -ENODEV; + } + } + + /* Print voltage and multiplier */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + current_voltage = lo & 0xff; + printk("eps: Current voltage = %dmV\n", current_voltage * 16 + 700); + current_multiplier = (lo >> 8) & 0xff; + printk("eps: Current multiplier = %d\n", current_multiplier); + + /* Print limits */ + max_voltage = hi & 0xff; + printk("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700); + max_multiplier = (hi >> 8) & 0xff; + printk("eps: Highest multiplier = %d\n", max_multiplier); + min_voltage = (hi >> 16) & 0xff; + printk("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700); + min_multiplier = (hi >> 24) & 0xff; + printk("eps: Lowest multiplier = %d\n", min_multiplier); + + /* Sanity checks */ + if (current_multiplier == 0 || max_multiplier == 0 + || min_multiplier == 0) + return -EINVAL; + if (current_multiplier > max_multiplier + || max_multiplier <= min_multiplier) + return -EINVAL; + if (current_voltage > 0x1c || max_voltage > 0x1c) + return -EINVAL; + if (max_voltage < min_voltage) + return -EINVAL; + + /* Calc FSB speed */ + fsb = cpu_khz / current_multiplier; + /* Calc number of p-states supported */ + if (brand == EPS_BRAND_C7M) + states = max_multiplier - min_multiplier + 1; + else + states = 2; + + /* Allocate private data and frequency table for current cpu */ + centaur = kzalloc(sizeof(struct eps_cpu_data) + + (states + 1) * sizeof(struct cpufreq_frequency_table), + GFP_KERNEL); + if (!centaur) + return -ENOMEM; + eps_cpu[0] = centaur; + + /* Copy basic values */ + centaur->fsb = fsb; + + /* Fill frequency and MSR value table */ + f_table = ¢aur->freq_table[0]; + if (brand != EPS_BRAND_C7M) { + f_table[0].frequency = fsb * min_multiplier; + f_table[0].index = (min_multiplier << 8) | min_voltage; + f_table[1].frequency = fsb * max_multiplier; + f_table[1].index = (max_multiplier << 8) | max_voltage; + f_table[2].frequency = CPUFREQ_TABLE_END; + } else { + k = 0; + step = ((max_voltage - min_voltage) * 256) + / (max_multiplier - min_multiplier); + for (i = min_multiplier; i <= max_multiplier; i++) { + voltage = (k * step) / 256 + min_voltage; + f_table[k].frequency = fsb * i; + f_table[k].index = (i << 8) | voltage; + k++; + } + f_table[k].frequency = CPUFREQ_TABLE_END; + } + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ + policy->cur = fsb * current_multiplier; + + ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]); + if (ret) { + kfree(centaur); + return ret; + } + + cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu); + return 0; +} + +static int eps_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (eps_cpu[cpu] == NULL) + return -ENODEV; + centaur = eps_cpu[cpu]; + + /* Get max frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + /* Set max frequency */ + eps_set_state(centaur, cpu, hi & 0xffff); + /* Bye */ + cpufreq_frequency_table_put_attr(policy->cpu); + kfree(eps_cpu[cpu]); + eps_cpu[cpu] = NULL; + return 0; +} + +static struct freq_attr* eps_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver eps_driver = { + .verify = eps_verify, + .target = eps_target, + .init = eps_cpu_init, + .exit = eps_cpu_exit, + .get = eps_get, + .name = "e_powersaver", + .owner = THIS_MODULE, + .attr = eps_attr, +}; + +static int __init eps_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + /* This driver will work only on Centaur C7 processors with + * Enhanced SpeedStep/PowerSaver registers */ + if (c->x86_vendor != X86_VENDOR_CENTAUR + || c->x86 != 6 || c->x86_model != 10) + return -ENODEV; + if (!cpu_has(c, X86_FEATURE_EST)) + return -ENODEV; + + if (cpufreq_register_driver(&eps_driver)) + return -EINVAL; + return 0; +} + +static void __exit eps_exit(void) +{ + cpufreq_unregister_driver(&eps_driver); +} + +MODULE_AUTHOR("Rafa³ Bilski <rafalbilski@interia.pl>"); +MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); +MODULE_LICENSE("GPL"); + +module_init(eps_init); +module_exit(eps_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c new file mode 100644 index 000000000000..f317276afa7a --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c @@ -0,0 +1,309 @@ +/* + * elanfreq: cpufreq driver for the AMD ELAN family + * + * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de> + * + * Parts of this code are (c) Sven Geggus <sven@geggus.net> + * + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/cpufreq.h> + +#include <asm/msr.h> +#include <asm/timex.h> +#include <asm/io.h> + +#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ +#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ + +/* Module parameter */ +static int max_freq; + +struct s_elan_multiplier { + int clock; /* frequency in kHz */ + int val40h; /* PMU Force Mode register */ + int val80h; /* CPU Clock Speed Register */ +}; + +/* + * It is important that the frequencies + * are listed in ascending order here! + */ +struct s_elan_multiplier elan_multiplier[] = { + {1000, 0x02, 0x18}, + {2000, 0x02, 0x10}, + {4000, 0x02, 0x08}, + {8000, 0x00, 0x00}, + {16000, 0x00, 0x02}, + {33000, 0x00, 0x04}, + {66000, 0x01, 0x04}, + {99000, 0x01, 0x05} +}; + +static struct cpufreq_frequency_table elanfreq_table[] = { + {0, 1000}, + {1, 2000}, + {2, 4000}, + {3, 8000}, + {4, 16000}, + {5, 33000}, + {6, 66000}, + {7, 99000}, + {0, CPUFREQ_TABLE_END}, +}; + + +/** + * elanfreq_get_cpu_frequency: determine current cpu speed + * + * Finds out at which frequency the CPU of the Elan SOC runs + * at the moment. Frequencies from 1 to 33 MHz are generated + * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" + * and have the rest of the chip running with 33 MHz. + */ + +static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg; /* Clock Speed Register */ + + local_irq_disable(); + outb_p(0x80,REG_CSCIR); + clockspeed_reg = inb_p(REG_CSCDR); + local_irq_enable(); + + if ((clockspeed_reg & 0xE0) == 0xE0) + return 0; + + /* Are we in CPU clock multiplied mode (66/99 MHz)? */ + if ((clockspeed_reg & 0xE0) == 0xC0) { + if ((clockspeed_reg & 0x01) == 0) + return 66000; + else + return 99000; + } + + /* 33 MHz is not 32 MHz... */ + if ((clockspeed_reg & 0xE0)==0xA0) + return 33000; + + return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000); +} + + +/** + * elanfreq_set_cpu_frequency: Change the CPU core frequency + * @cpu: cpu number + * @freq: frequency in kHz + * + * This function takes a frequency value and changes the CPU frequency + * according to this. Note that the frequency has to be checked by + * elanfreq_validatespeed() for correctness! + * + * There is no return value. + */ + +static void elanfreq_set_cpu_state (unsigned int state) +{ + struct cpufreq_freqs freqs; + + freqs.old = elanfreq_get_cpu_frequency(0); + freqs.new = elan_multiplier[state].clock; + freqs.cpu = 0; /* elanfreq.c is UP only driver */ + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n", + elan_multiplier[state].clock); + + + /* + * Access to the Elan's internal registers is indexed via + * 0x22: Chip Setup & Control Register Index Register (CSCI) + * 0x23: Chip Setup & Control Register Data Register (CSCD) + * + */ + + /* + * 0x40 is the Power Management Unit's Force Mode Register. + * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) + */ + + local_irq_disable(); + outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */ + outb_p(0x00,REG_CSCDR); + local_irq_enable(); /* wait till internal pipelines and */ + udelay(1000); /* buffers have cleaned up */ + + local_irq_disable(); + + /* now, set the CPU clock speed register (0x80) */ + outb_p(0x80,REG_CSCIR); + outb_p(elan_multiplier[state].val80h,REG_CSCDR); + + /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ + outb_p(0x40,REG_CSCIR); + outb_p(elan_multiplier[state].val40h,REG_CSCDR); + udelay(10000); + local_irq_enable(); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +}; + + +/** + * elanfreq_validatespeed: test if frequency range is valid + * @policy: the policy to validate + * + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. + */ + +static int elanfreq_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); +} + +static int elanfreq_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate)) + return -EINVAL; + + elanfreq_set_cpu_state(newstate); + + return 0; +} + + +/* + * Module init and exit code + */ + +static int elanfreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = cpu_data; + unsigned int i; + int result; + + /* capability check */ + if ((c->x86_vendor != X86_VENDOR_AMD) || + (c->x86 != 4) || (c->x86_model!=10)) + return -ENODEV; + + /* max freq */ + if (!max_freq) + max_freq = elanfreq_get_cpu_frequency(0); + + /* table init */ + for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { + if (elanfreq_table[i].frequency > max_freq) + elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID; + } + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = elanfreq_get_cpu_frequency(0); + + result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); + return 0; +} + + +static int elanfreq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + + +#ifndef MODULE +/** + * elanfreq_setup - elanfreq command line parameter parsing + * + * elanfreq command line parameter. Use: + * elanfreq=66000 + * to set the maximum CPU frequency to 66 MHz. Note that in + * case you do not give this boot parameter, the maximum + * frequency will fall back to _current_ CPU frequency which + * might be lower. If you build this as a module, use the + * max_freq module parameter instead. + */ +static int __init elanfreq_setup(char *str) +{ + max_freq = simple_strtoul(str, &str, 0); + printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); + return 1; +} +__setup("elanfreq=", elanfreq_setup); +#endif + + +static struct freq_attr* elanfreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + + +static struct cpufreq_driver elanfreq_driver = { + .get = elanfreq_get_cpu_frequency, + .verify = elanfreq_verify, + .target = elanfreq_target, + .init = elanfreq_cpu_init, + .exit = elanfreq_cpu_exit, + .name = "elanfreq", + .owner = THIS_MODULE, + .attr = elanfreq_attr, +}; + + +static int __init elanfreq_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + /* Test if we have the right hardware */ + if ((c->x86_vendor != X86_VENDOR_AMD) || + (c->x86 != 4) || (c->x86_model!=10)) { + printk(KERN_INFO "elanfreq: error: no Elan processor found!\n"); + return -ENODEV; + } + return cpufreq_register_driver(&elanfreq_driver); +} + + +static void __exit elanfreq_exit(void) +{ + cpufreq_unregister_driver(&elanfreq_driver); +} + + +module_param (max_freq, int, 0444); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>"); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); + +module_init(elanfreq_init); +module_exit(elanfreq_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c new file mode 100644 index 000000000000..461dabc4e495 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c @@ -0,0 +1,495 @@ +/* + * Cyrix MediaGX and NatSemi Geode Suspend Modulation + * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> + * (C) 2002 Hiroshi Miura <miura@da-cha.org> + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation + * + * The author(s) of this software shall not be held liable for damages + * of any nature resulting due to the use of this software. This + * software is provided AS-IS with no warranties. + * + * Theoritical note: + * + * (see Geode(tm) CS5530 manual (rev.4.1) page.56) + * + * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0 + * are based on Suspend Moduration. + * + * Suspend Modulation works by asserting and de-asserting the SUSP# pin + * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# + * the CPU enters an idle state. GX1 stops its core clock when SUSP# is + * asserted then power consumption is reduced. + * + * Suspend Modulation's OFF/ON duration are configurable + * with 'Suspend Modulation OFF Count Register' + * and 'Suspend Modulation ON Count Register'. + * These registers are 8bit counters that represent the number of + * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) + * to the processor. + * + * These counters define a ratio which is the effective frequency + * of operation of the system. + * + * OFF Count + * F_eff = Fgx * ---------------------- + * OFF Count + ON Count + * + * 0 <= On Count, Off Count <= 255 + * + * From these limits, we can get register values + * + * off_duration + on_duration <= MAX_DURATION + * on_duration = off_duration * (stock_freq - freq) / freq + * + * off_duration = (freq * DURATION) / stock_freq + * on_duration = DURATION - off_duration + * + * + *--------------------------------------------------------------------------- + * + * ChangeLog: + * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> + * - fix on/off register mistake + * - fix cpu_khz calc when it stops cpu modulation. + * + * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> + * - rewrite for Cyrix MediaGX Cx5510/5520 and + * NatSemi Geode Cs5530(A). + * + * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com> + * - cs5530_mod patch for 2.4.19-rc1. + * + *--------------------------------------------------------------------------- + * + * Todo + * Test on machines with 5510, 5530, 5530A + */ + +/************************************************************************ + * Suspend Modulation - Definitions * + ************************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <asm/processor-cyrix.h> +#include <asm/errno.h> + +/* PCI config registers, all at F0 */ +#define PCI_PMER1 0x80 /* power management enable register 1 */ +#define PCI_PMER2 0x81 /* power management enable register 2 */ +#define PCI_PMER3 0x82 /* power management enable register 3 */ +#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ +#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ +#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ +#define PCI_MODON 0x95 /* suspend modulation ON counter register */ +#define PCI_SUSCFG 0x96 /* suspend configuration register */ + +/* PMER1 bits */ +#define GPM (1<<0) /* global power management */ +#define GIT (1<<1) /* globally enable PM device idle timers */ +#define GTR (1<<2) /* globally enable IO traps */ +#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ +#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ + +/* SUSCFG bits */ +#define SUSMOD (1<<0) /* enable/disable suspend modulation */ +/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ +#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ + /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ +#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ +/* the belows support only with cs5530A */ +#define PWRSVE_ISA (1<<3) /* stop ISA clock */ +#define PWRSVE (1<<4) /* active idle */ + +struct gxfreq_params { + u8 on_duration; + u8 off_duration; + u8 pci_suscfg; + u8 pci_pmer1; + u8 pci_pmer2; + struct pci_dev *cs55x0; +}; + +static struct gxfreq_params *gx_params; +static int stock_freq; + +/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */ +static int pci_busclk = 0; +module_param (pci_busclk, int, 0444); + +/* maximum duration for which the cpu may be suspended + * (32us * MAX_DURATION). If no parameter is given, this defaults + * to 255. + * Note that this leads to a maximum of 8 ms(!) where the CPU clock + * is suspended -- processing power is just 0.39% of what it used to be, + * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ +static int max_duration = 255; +module_param (max_duration, int, 0444); + +/* For the default policy, we want at least some processing power + * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV) + */ +#define POLICY_MIN_DIV 20 + + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg) + +/** + * we can detect a core multipiler from dir0_lsb + * from GX1 datasheet p.56, + * MULT[3:0]: + * 0000 = SYSCLK multiplied by 4 (test only) + * 0001 = SYSCLK multiplied by 10 + * 0010 = SYSCLK multiplied by 4 + * 0011 = SYSCLK multiplied by 6 + * 0100 = SYSCLK multiplied by 9 + * 0101 = SYSCLK multiplied by 5 + * 0110 = SYSCLK multiplied by 7 + * 0111 = SYSCLK multiplied by 8 + * of 33.3MHz + **/ +static int gx_freq_mult[16] = { + 4, 10, 4, 6, 9, 5, 7, 8, + 0, 0, 0, 0, 0, 0, 0, 0 +}; + + +/**************************************************************** + * Low Level chipset interface * + ****************************************************************/ +static struct pci_device_id gx_chipset_tbl[] __initdata = { + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, + { 0, }, +}; + +/** + * gx_detect_chipset: + * + **/ +static __init struct pci_dev *gx_detect_chipset(void) +{ + struct pci_dev *gx_pci = NULL; + + /* check if CPU is a MediaGX or a Geode. */ + if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && + (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) { + dprintk("error: no MediaGX/Geode processor found!\n"); + return NULL; + } + + /* detect which companion chip is used */ + while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) { + if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) + return gx_pci; + } + + dprintk("error: no supported chipset found!\n"); + return NULL; +} + +/** + * gx_get_cpuspeed: + * + * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs. + */ +static unsigned int gx_get_cpuspeed(unsigned int cpu) +{ + if ((gx_params->pci_suscfg & SUSMOD) == 0) + return stock_freq; + + return (stock_freq * gx_params->off_duration) + / (gx_params->on_duration + gx_params->off_duration); +} + +/** + * gx_validate_speed: + * determine current cpu speed + * + **/ + +static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration) +{ + unsigned int i; + u8 tmp_on, tmp_off; + int old_tmp_freq = stock_freq; + int tmp_freq; + + *off_duration=1; + *on_duration=0; + + for (i=max_duration; i>0; i--) { + tmp_off = ((khz * i) / stock_freq) & 0xff; + tmp_on = i - tmp_off; + tmp_freq = (stock_freq * tmp_off) / i; + /* if this relation is closer to khz, use this. If it's equal, + * prefer it, too - lower latency */ + if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) { + *on_duration = tmp_on; + *off_duration = tmp_off; + old_tmp_freq = tmp_freq; + } + } + + return old_tmp_freq; +} + + +/** + * gx_set_cpuspeed: + * set cpu speed in khz. + **/ + +static void gx_set_cpuspeed(unsigned int khz) +{ + u8 suscfg, pmer1; + unsigned int new_khz; + unsigned long flags; + struct cpufreq_freqs freqs; + + freqs.cpu = 0; + freqs.old = gx_get_cpuspeed(0); + + new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration); + + freqs.new = new_khz; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + local_irq_save(flags); + + if (new_khz != stock_freq) { /* if new khz == 100% of CPU speed, it is special case */ + switch (gx_params->cs55x0->device) { + case PCI_DEVICE_ID_CYRIX_5530_LEGACY: + pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP; + /* FIXME: need to test other values -- Zwane,Miura */ + pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */ + pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */ + pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1); + + if (gx_params->cs55x0->revision < 0x10) { /* CS5530(rev 1.2, 1.3) */ + suscfg = gx_params->pci_suscfg | SUSMOD; + } else { /* CS5530A,B.. */ + suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE; + } + break; + case PCI_DEVICE_ID_CYRIX_5520: + case PCI_DEVICE_ID_CYRIX_5510: + suscfg = gx_params->pci_suscfg | SUSMOD; + break; + default: + local_irq_restore(flags); + dprintk("fatal: try to set unknown chipset.\n"); + return; + } + } else { + suscfg = gx_params->pci_suscfg & ~(SUSMOD); + gx_params->off_duration = 0; + gx_params->on_duration = 0; + dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n"); + } + + pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration); + pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration); + + pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); + pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); + + local_irq_restore(flags); + + gx_params->pci_suscfg = suscfg; + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", + gx_params->on_duration * 32, gx_params->off_duration * 32); + dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); +} + +/**************************************************************** + * High level functions * + ****************************************************************/ + +/* + * cpufreq_gx_verify: test if frequency range is valid + * + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. + */ + +static int cpufreq_gx_verify(struct cpufreq_policy *policy) +{ + unsigned int tmp_freq = 0; + u8 tmp1, tmp2; + + if (!stock_freq || !policy) + return -EINVAL; + + policy->cpu = 0; + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); + + /* it needs to be assured that at least one supported frequency is + * within policy->min and policy->max. If it is not, policy->max + * needs to be increased until one freuqency is supported. + * policy->min may not be decreased, though. This way we guarantee a + * specific processing capacity. + */ + tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); + if (tmp_freq < policy->min) + tmp_freq += stock_freq / max_duration; + policy->min = tmp_freq; + if (policy->min > policy->max) + policy->max = tmp_freq; + tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); + if (tmp_freq > policy->max) + tmp_freq -= stock_freq / max_duration; + policy->max = tmp_freq; + if (policy->max < policy->min) + policy->max = policy->min; + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); + + return 0; +} + +/* + * cpufreq_gx_target: + * + */ +static int cpufreq_gx_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + u8 tmp1, tmp2; + unsigned int tmp_freq; + + if (!stock_freq || !policy) + return -EINVAL; + + policy->cpu = 0; + + tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2); + while (tmp_freq < policy->min) { + tmp_freq += stock_freq / max_duration; + tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); + } + while (tmp_freq > policy->max) { + tmp_freq -= stock_freq / max_duration; + tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); + } + + gx_set_cpuspeed(tmp_freq); + + return 0; +} + +static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int maxfreq, curfreq; + + if (!policy || policy->cpu != 0) + return -ENODEV; + + /* determine maximum frequency */ + if (pci_busclk) { + maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; + } else if (cpu_khz) { + maxfreq = cpu_khz; + } else { + maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; + } + stock_freq = maxfreq; + curfreq = gx_get_cpuspeed(0); + + dprintk("cpu max frequency is %d.\n", maxfreq); + dprintk("cpu current frequency is %dkHz.\n",curfreq); + + /* setup basic struct for cpufreq API */ + policy->cpu = 0; + + if (max_duration < POLICY_MIN_DIV) + policy->min = maxfreq / max_duration; + else + policy->min = maxfreq / POLICY_MIN_DIV; + policy->max = maxfreq; + policy->cur = curfreq; + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.min_freq = maxfreq / max_duration; + policy->cpuinfo.max_freq = maxfreq; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + + return 0; +} + +/* + * cpufreq_gx_init: + * MediaGX/Geode GX initialize cpufreq driver + */ +static struct cpufreq_driver gx_suspmod_driver = { + .get = gx_get_cpuspeed, + .verify = cpufreq_gx_verify, + .target = cpufreq_gx_target, + .init = cpufreq_gx_cpu_init, + .name = "gx-suspmod", + .owner = THIS_MODULE, +}; + +static int __init cpufreq_gx_init(void) +{ + int ret; + struct gxfreq_params *params; + struct pci_dev *gx_pci; + + /* Test if we have the right hardware */ + if ((gx_pci = gx_detect_chipset()) == NULL) + return -ENODEV; + + /* check whether module parameters are sane */ + if (max_duration > 0xff) + max_duration = 0xff; + + dprintk("geode suspend modulation available.\n"); + + params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL); + if (params == NULL) + return -ENOMEM; + + params->cs55x0 = gx_pci; + gx_params = params; + + /* keep cs55x0 configurations */ + pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg)); + pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1)); + pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); + pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); + pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration)); + + if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { + kfree(params); + return ret; /* register error! */ + } + + return 0; +} + +static void __exit cpufreq_gx_exit(void) +{ + cpufreq_unregister_driver(&gx_suspmod_driver); + pci_dev_put(gx_params->cs55x0); + kfree(gx_params); +} + +MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>"); +MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); +MODULE_LICENSE ("GPL"); + +module_init(cpufreq_gx_init); +module_exit(cpufreq_gx_exit); + diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c new file mode 100644 index 000000000000..f0cce3c2dc3a --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -0,0 +1,1024 @@ +/* + * (C) 2001-2004 Dave Jones. <davej@codemonkey.org.uk> + * (C) 2002 Padraig Brady. <padraig@antefacto.com> + * + * Licensed under the terms of the GNU GPL License version 2. + * Based upon datasheets & sample CPUs kindly provided by VIA. + * + * VIA have currently 3 different versions of Longhaul. + * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147. + * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0. + * Version 2 of longhaul is backward compatible with v1, but adds + * LONGHAUL MSR for purpose of both frequency and voltage scaling. + * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C). + * Version 3 of longhaul got renamed to Powersaver and redesigned + * to use only the POWERSAVER MSR at 0x110a. + * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. + * It's pretty much the same feature wise to longhaul v2, though + * there is provision for scaling FSB too, but this doesn't work + * too well in practice so we don't even try to use this. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/delay.h> + +#include <asm/msr.h> +#include <asm/timex.h> +#include <asm/io.h> +#include <asm/acpi.h> +#include <linux/acpi.h> +#include <acpi/processor.h> + +#include "longhaul.h" + +#define PFX "longhaul: " + +#define TYPE_LONGHAUL_V1 1 +#define TYPE_LONGHAUL_V2 2 +#define TYPE_POWERSAVER 3 + +#define CPU_SAMUEL 1 +#define CPU_SAMUEL2 2 +#define CPU_EZRA 3 +#define CPU_EZRA_T 4 +#define CPU_NEHEMIAH 5 +#define CPU_NEHEMIAH_C 6 + +/* Flags */ +#define USE_ACPI_C3 (1 << 1) +#define USE_NORTHBRIDGE (1 << 2) + +static int cpu_model; +static unsigned int numscales=16; +static unsigned int fsb; + +static const struct mV_pos *vrm_mV_table; +static const unsigned char *mV_vrm_table; + +static unsigned int highest_speed, lowest_speed; /* kHz */ +static unsigned int minmult, maxmult; +static int can_scale_voltage; +static struct acpi_processor *pr = NULL; +static struct acpi_processor_cx *cx = NULL; +static u32 acpi_regs_addr; +static u8 longhaul_flags; +static unsigned int longhaul_index; + +/* Module parameters */ +static int scale_voltage; +static int disable_acpi_c3; +static int revid_errata; + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) + + +/* Clock ratios multiplied by 10 */ +static int clock_ratio[32]; +static int eblcr_table[32]; +static int longhaul_version; +static struct cpufreq_frequency_table *longhaul_table; + +#ifdef CONFIG_CPU_FREQ_DEBUG +static char speedbuffer[8]; + +static char *print_speed(int speed) +{ + if (speed < 1000) { + snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed); + return speedbuffer; + } + + if (speed%1000 == 0) + snprintf(speedbuffer, sizeof(speedbuffer), + "%dGHz", speed/1000); + else + snprintf(speedbuffer, sizeof(speedbuffer), + "%d.%dGHz", speed/1000, (speed%1000)/100); + + return speedbuffer; +} +#endif + + +static unsigned int calc_speed(int mult) +{ + int khz; + khz = (mult/10)*fsb; + if (mult%10) + khz += fsb/2; + khz *= 1000; + return khz; +} + + +static int longhaul_get_cpu_mult(void) +{ + unsigned long invalue=0,lo, hi; + + rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi); + invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22; + if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) { + if (lo & (1<<27)) + invalue+=16; + } + return eblcr_table[invalue]; +} + +/* For processor with BCR2 MSR */ + +static void do_longhaul1(unsigned int clock_ratio_index) +{ + union msr_bcr2 bcr2; + + rdmsrl(MSR_VIA_BCR2, bcr2.val); + /* Enable software clock multiplier */ + bcr2.bits.ESOFTBF = 1; + bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff; + + /* Sync to timer tick */ + safe_halt(); + /* Change frequency on next halt or sleep */ + wrmsrl(MSR_VIA_BCR2, bcr2.val); + /* Invoke transition */ + ACPI_FLUSH_CPU_CACHE(); + halt(); + + /* Disable software clock multiplier */ + local_irq_disable(); + rdmsrl(MSR_VIA_BCR2, bcr2.val); + bcr2.bits.ESOFTBF = 0; + wrmsrl(MSR_VIA_BCR2, bcr2.val); +} + +/* For processor with Longhaul MSR */ + +static void do_powersaver(int cx_address, unsigned int clock_ratio_index, + unsigned int dir) +{ + union msr_longhaul longhaul; + u32 t; + + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Setup new frequency */ + if (!revid_errata) + longhaul.bits.RevisionKey = longhaul.bits.RevisionID; + else + longhaul.bits.RevisionKey = 0; + longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf; + longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; + /* Setup new voltage */ + if (can_scale_voltage) + longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f; + /* Sync to timer tick */ + safe_halt(); + /* Raise voltage if necessary */ + if (can_scale_voltage && dir) { + longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + } + + /* Change frequency on next halt or sleep */ + longhaul.bits.EnableSoftBusRatio = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + /* Disable bus ratio bit */ + longhaul.bits.EnableSoftBusRatio = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + + /* Reduce voltage if necessary */ + if (can_scale_voltage && !dir) { + longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + } +} + +/** + * longhaul_set_cpu_frequency() + * @clock_ratio_index : bitpattern of the new multiplier. + * + * Sets a new clock ratio. + */ + +static void longhaul_setstate(unsigned int table_index) +{ + unsigned int clock_ratio_index; + int speed, mult; + struct cpufreq_freqs freqs; + unsigned long flags; + unsigned int pic1_mask, pic2_mask; + u16 bm_status = 0; + u32 bm_timeout = 1000; + unsigned int dir = 0; + + clock_ratio_index = longhaul_table[table_index].index; + /* Safety precautions */ + mult = clock_ratio[clock_ratio_index & 0x1f]; + if (mult == -1) + return; + speed = calc_speed(mult); + if ((speed > highest_speed) || (speed < lowest_speed)) + return; + /* Voltage transition before frequency transition? */ + if (can_scale_voltage && longhaul_index < table_index) + dir = 1; + + freqs.old = calc_speed(longhaul_get_cpu_mult()); + freqs.new = speed; + freqs.cpu = 0; /* longhaul.c is UP only driver */ + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", + fsb, mult/10, mult%10, print_speed(speed/1000)); +retry_loop: + preempt_disable(); + local_irq_save(flags); + + pic2_mask = inb(0xA1); + pic1_mask = inb(0x21); /* works on C3. save mask. */ + outb(0xFF,0xA1); /* Overkill */ + outb(0xFE,0x21); /* TMR0 only */ + + /* Wait while PCI bus is busy. */ + if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE + || ((pr != NULL) && pr->flags.bm_control))) { + bm_status = inw(acpi_regs_addr); + bm_status &= 1 << 4; + while (bm_status && bm_timeout) { + outw(1 << 4, acpi_regs_addr); + bm_timeout--; + bm_status = inw(acpi_regs_addr); + bm_status &= 1 << 4; + } + } + + if (longhaul_flags & USE_NORTHBRIDGE) { + /* Disable AGP and PCI arbiters */ + outb(3, 0x22); + } else if ((pr != NULL) && pr->flags.bm_control) { + /* Disable bus master arbitration */ + acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1); + } + switch (longhaul_version) { + + /* + * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B]) + * Software controlled multipliers only. + */ + case TYPE_LONGHAUL_V1: + do_longhaul1(clock_ratio_index); + break; + + /* + * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C] + * + * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) + * Nehemiah can do FSB scaling too, but this has never been proven + * to work in practice. + */ + case TYPE_LONGHAUL_V2: + case TYPE_POWERSAVER: + if (longhaul_flags & USE_ACPI_C3) { + /* Don't allow wakeup */ + acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); + do_powersaver(cx->address, clock_ratio_index, dir); + } else { + do_powersaver(0, clock_ratio_index, dir); + } + break; + } + + if (longhaul_flags & USE_NORTHBRIDGE) { + /* Enable arbiters */ + outb(0, 0x22); + } else if ((pr != NULL) && pr->flags.bm_control) { + /* Enable bus master arbitration */ + acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); + } + outb(pic2_mask,0xA1); /* restore mask */ + outb(pic1_mask,0x21); + + local_irq_restore(flags); + preempt_enable(); + + freqs.new = calc_speed(longhaul_get_cpu_mult()); + /* Check if requested frequency is set. */ + if (unlikely(freqs.new != speed)) { + printk(KERN_INFO PFX "Failed to set requested frequency!\n"); + /* Revision ID = 1 but processor is expecting revision key + * equal to 0. Jumpers at the bottom of processor will change + * multiplier and FSB, but will not change bits in Longhaul + * MSR nor enable voltage scaling. */ + if (!revid_errata) { + printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" " + "option.\n"); + revid_errata = 1; + msleep(200); + goto retry_loop; + } + /* Why ACPI C3 sometimes doesn't work is a mystery for me. + * But it does happen. Processor is entering ACPI C3 state, + * but it doesn't change frequency. I tried poking various + * bits in northbridge registers, but without success. */ + if (longhaul_flags & USE_ACPI_C3) { + printk(KERN_INFO PFX "Disabling ACPI C3 support.\n"); + longhaul_flags &= ~USE_ACPI_C3; + if (revid_errata) { + printk(KERN_INFO PFX "Disabling \"Ignore " + "Revision ID\" option.\n"); + revid_errata = 0; + } + msleep(200); + goto retry_loop; + } + /* This shouldn't happen. Longhaul ver. 2 was reported not + * working on processors without voltage scaling, but with + * RevID = 1. RevID errata will make things right. Just + * to be 100% sure. */ + if (longhaul_version == TYPE_LONGHAUL_V2) { + printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n"); + longhaul_version = TYPE_LONGHAUL_V1; + msleep(200); + goto retry_loop; + } + } + /* Report true CPU frequency */ + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + if (!bm_timeout) + printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n"); +} + +/* + * Centaur decided to make life a little more tricky. + * Only longhaul v1 is allowed to read EBLCR BSEL[0:1]. + * Samuel2 and above have to try and guess what the FSB is. + * We do this by assuming we booted at maximum multiplier, and interpolate + * between that value multiplied by possible FSBs and cpu_mhz which + * was calculated at boot time. Really ugly, but no other way to do this. + */ + +#define ROUNDING 0xf + +static int guess_fsb(int mult) +{ + int speed = cpu_khz / 1000; + int i; + int speeds[] = { 666, 1000, 1333, 2000 }; + int f_max, f_min; + + for (i = 0; i < 4; i++) { + f_max = ((speeds[i] * mult) + 50) / 100; + f_max += (ROUNDING / 2); + f_min = f_max - ROUNDING; + if ((speed <= f_max) && (speed >= f_min)) + return speeds[i] / 10; + } + return 0; +} + + +static int __init longhaul_get_ranges(void) +{ + unsigned int i, j, k = 0; + unsigned int ratio; + int mult; + + /* Get current frequency */ + mult = longhaul_get_cpu_mult(); + if (mult == -1) { + printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); + return -EINVAL; + } + fsb = guess_fsb(mult); + if (fsb == 0) { + printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); + return -EINVAL; + } + /* Get max multiplier - as we always did. + * Longhaul MSR is usefull only when voltage scaling is enabled. + * C3 is booting at max anyway. */ + maxmult = mult; + /* Get min multiplier */ + switch (cpu_model) { + case CPU_NEHEMIAH: + minmult = 50; + break; + case CPU_NEHEMIAH_C: + minmult = 40; + break; + default: + minmult = 30; + break; + } + + dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n", + minmult/10, minmult%10, maxmult/10, maxmult%10); + + highest_speed = calc_speed(maxmult); + lowest_speed = calc_speed(minmult); + dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, + print_speed(lowest_speed/1000), + print_speed(highest_speed/1000)); + + if (lowest_speed == highest_speed) { + printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n"); + return -EINVAL; + } + if (lowest_speed > highest_speed) { + printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", + lowest_speed, highest_speed); + return -EINVAL; + } + + longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL); + if(!longhaul_table) + return -ENOMEM; + + for (j = 0; j < numscales; j++) { + ratio = clock_ratio[j]; + if (ratio == -1) + continue; + if (ratio > maxmult || ratio < minmult) + continue; + longhaul_table[k].frequency = calc_speed(ratio); + longhaul_table[k].index = j; + k++; + } + if (k <= 1) { + kfree(longhaul_table); + return -ENODEV; + } + /* Sort */ + for (j = 0; j < k - 1; j++) { + unsigned int min_f, min_i; + min_f = longhaul_table[j].frequency; + min_i = j; + for (i = j + 1; i < k; i++) { + if (longhaul_table[i].frequency < min_f) { + min_f = longhaul_table[i].frequency; + min_i = i; + } + } + if (min_i != j) { + unsigned int temp; + temp = longhaul_table[j].frequency; + longhaul_table[j].frequency = longhaul_table[min_i].frequency; + longhaul_table[min_i].frequency = temp; + temp = longhaul_table[j].index; + longhaul_table[j].index = longhaul_table[min_i].index; + longhaul_table[min_i].index = temp; + } + } + + longhaul_table[k].frequency = CPUFREQ_TABLE_END; + + /* Find index we are running on */ + for (j = 0; j < k; j++) { + if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) { + longhaul_index = j; + break; + } + } + return 0; +} + + +static void __init longhaul_setup_voltagescaling(void) +{ + union msr_longhaul longhaul; + struct mV_pos minvid, maxvid, vid; + unsigned int j, speed, pos, kHz_step, numvscales; + int min_vid_speed; + + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + if (!(longhaul.bits.RevisionID & 1)) { + printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); + return; + } + + if (!longhaul.bits.VRMRev) { + printk(KERN_INFO PFX "VRM 8.5\n"); + vrm_mV_table = &vrm85_mV[0]; + mV_vrm_table = &mV_vrm85[0]; + } else { + printk(KERN_INFO PFX "Mobile VRM\n"); + if (cpu_model < CPU_NEHEMIAH) + return; + vrm_mV_table = &mobilevrm_mV[0]; + mV_vrm_table = &mV_mobilevrm[0]; + } + + minvid = vrm_mV_table[longhaul.bits.MinimumVID]; + maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; + + if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { + printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " + "Voltage scaling disabled.\n", + minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000); + return; + } + + if (minvid.mV == maxvid.mV) { + printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are " + "both %d.%03d. Voltage scaling disabled\n", + maxvid.mV/1000, maxvid.mV%1000); + return; + } + + /* How many voltage steps */ + numvscales = maxvid.pos - minvid.pos + 1; + printk(KERN_INFO PFX + "Max VID=%d.%03d " + "Min VID=%d.%03d, " + "%d possible voltage scales\n", + maxvid.mV/1000, maxvid.mV%1000, + minvid.mV/1000, minvid.mV%1000, + numvscales); + + /* Calculate max frequency at min voltage */ + j = longhaul.bits.MinMHzBR; + if (longhaul.bits.MinMHzBR4) + j += 16; + min_vid_speed = eblcr_table[j]; + if (min_vid_speed == -1) + return; + switch (longhaul.bits.MinMHzFSB) { + case 0: + min_vid_speed *= 13333; + break; + case 1: + min_vid_speed *= 10000; + break; + case 3: + min_vid_speed *= 6666; + break; + default: + return; + break; + } + if (min_vid_speed >= highest_speed) + return; + /* Calculate kHz for one voltage step */ + kHz_step = (highest_speed - min_vid_speed) / numvscales; + + j = 0; + while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { + speed = longhaul_table[j].frequency; + if (speed > min_vid_speed) + pos = (speed - min_vid_speed) / kHz_step + minvid.pos; + else + pos = minvid.pos; + longhaul_table[j].index |= mV_vrm_table[pos] << 8; + vid = vrm_mV_table[mV_vrm_table[pos]]; + printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); + j++; + } + + can_scale_voltage = 1; + printk(KERN_INFO PFX "Voltage scaling enabled.\n"); +} + + +static int longhaul_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, longhaul_table); +} + + +static int longhaul_target(struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int table_index = 0; + unsigned int i; + unsigned int dir = 0; + u8 vid, current_vid; + + if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index)) + return -EINVAL; + + /* Don't set same frequency again */ + if (longhaul_index == table_index) + return 0; + + if (!can_scale_voltage) + longhaul_setstate(table_index); + else { + /* On test system voltage transitions exceeding single + * step up or down were turning motherboard off. Both + * "ondemand" and "userspace" are unsafe. C7 is doing + * this in hardware, C3 is old and we need to do this + * in software. */ + i = longhaul_index; + current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f; + if (table_index > longhaul_index) + dir = 1; + while (i != table_index) { + vid = (longhaul_table[i].index >> 8) & 0x1f; + if (vid != current_vid) { + longhaul_setstate(i); + current_vid = vid; + msleep(200); + } + if (dir) + i++; + else + i--; + } + longhaul_setstate(table_index); + } + longhaul_index = table_index; + return 0; +} + + +static unsigned int longhaul_get(unsigned int cpu) +{ + if (cpu) + return 0; + return calc_speed(longhaul_get_cpu_mult()); +} + +static acpi_status longhaul_walk_callback(acpi_handle obj_handle, + u32 nesting_level, + void *context, void **return_value) +{ + struct acpi_device *d; + + if ( acpi_bus_get_device(obj_handle, &d) ) { + return 0; + } + *return_value = (void *)acpi_driver_data(d); + return 1; +} + +/* VIA don't support PM2 reg, but have something similar */ +static int enable_arbiter_disable(void) +{ + struct pci_dev *dev; + int status = 1; + int reg; + u8 pci_cmd; + + /* Find PLE133 host bridge */ + reg = 0x78; + dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, + NULL); + /* Find CLE266 host bridge */ + if (dev == NULL) { + reg = 0x76; + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_862X_0, NULL); + /* Find CN400 V-Link host bridge */ + if (dev == NULL) + dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL); + } + if (dev != NULL) { + /* Enable access to port 0x22 */ + pci_read_config_byte(dev, reg, &pci_cmd); + if (!(pci_cmd & 1<<7)) { + pci_cmd |= 1<<7; + pci_write_config_byte(dev, reg, pci_cmd); + pci_read_config_byte(dev, reg, &pci_cmd); + if (!(pci_cmd & 1<<7)) { + printk(KERN_ERR PFX + "Can't enable access to port 0x22.\n"); + status = 0; + } + } + pci_dev_put(dev); + return status; + } + return 0; +} + +static int longhaul_setup_southbridge(void) +{ + struct pci_dev *dev; + u8 pci_cmd; + + /* Find VT8235 southbridge */ + dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); + if (dev == NULL) + /* Find VT8237 southbridge */ + dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_8237, NULL); + if (dev != NULL) { + /* Set transition time to max */ + pci_read_config_byte(dev, 0xec, &pci_cmd); + pci_cmd &= ~(1 << 2); + pci_write_config_byte(dev, 0xec, pci_cmd); + pci_read_config_byte(dev, 0xe4, &pci_cmd); + pci_cmd &= ~(1 << 7); + pci_write_config_byte(dev, 0xe4, pci_cmd); + pci_read_config_byte(dev, 0xe5, &pci_cmd); + pci_cmd |= 1 << 7; + pci_write_config_byte(dev, 0xe5, pci_cmd); + /* Get address of ACPI registers block*/ + pci_read_config_byte(dev, 0x81, &pci_cmd); + if (pci_cmd & 1 << 7) { + pci_read_config_dword(dev, 0x88, &acpi_regs_addr); + acpi_regs_addr &= 0xff00; + printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr); + } + + pci_dev_put(dev); + return 1; + } + return 0; +} + +static int __init longhaul_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = cpu_data; + char *cpuname=NULL; + int ret; + u32 lo, hi; + + /* Check what we have on this motherboard */ + switch (c->x86_model) { + case 6: + cpu_model = CPU_SAMUEL; + cpuname = "C3 'Samuel' [C5A]"; + longhaul_version = TYPE_LONGHAUL_V1; + memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio)); + memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr)); + break; + + case 7: + switch (c->x86_mask) { + case 0: + longhaul_version = TYPE_LONGHAUL_V1; + cpu_model = CPU_SAMUEL2; + cpuname = "C3 'Samuel 2' [C5B]"; + /* Note, this is not a typo, early Samuel2's had + * Samuel1 ratios. */ + memcpy(clock_ratio, samuel1_clock_ratio, + sizeof(samuel1_clock_ratio)); + memcpy(eblcr_table, samuel2_eblcr, + sizeof(samuel2_eblcr)); + break; + case 1 ... 15: + longhaul_version = TYPE_LONGHAUL_V1; + if (c->x86_mask < 8) { + cpu_model = CPU_SAMUEL2; + cpuname = "C3 'Samuel 2' [C5B]"; + } else { + cpu_model = CPU_EZRA; + cpuname = "C3 'Ezra' [C5C]"; + } + memcpy(clock_ratio, ezra_clock_ratio, + sizeof(ezra_clock_ratio)); + memcpy(eblcr_table, ezra_eblcr, + sizeof(ezra_eblcr)); + break; + } + break; + + case 8: + cpu_model = CPU_EZRA_T; + cpuname = "C3 'Ezra-T' [C5M]"; + longhaul_version = TYPE_POWERSAVER; + numscales=32; + memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio)); + memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr)); + break; + + case 9: + longhaul_version = TYPE_POWERSAVER; + numscales = 32; + memcpy(clock_ratio, + nehemiah_clock_ratio, + sizeof(nehemiah_clock_ratio)); + memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr)); + switch (c->x86_mask) { + case 0 ... 1: + cpu_model = CPU_NEHEMIAH; + cpuname = "C3 'Nehemiah A' [C5XLOE]"; + break; + case 2 ... 4: + cpu_model = CPU_NEHEMIAH; + cpuname = "C3 'Nehemiah B' [C5XLOH]"; + break; + case 5 ... 15: + cpu_model = CPU_NEHEMIAH_C; + cpuname = "C3 'Nehemiah C' [C5P]"; + break; + } + break; + + default: + cpuname = "Unknown"; + break; + } + /* Check Longhaul ver. 2 */ + if (longhaul_version == TYPE_LONGHAUL_V2) { + rdmsr(MSR_VIA_LONGHAUL, lo, hi); + if (lo == 0 && hi == 0) + /* Looks like MSR isn't present */ + longhaul_version = TYPE_LONGHAUL_V1; + } + + printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname); + switch (longhaul_version) { + case TYPE_LONGHAUL_V1: + case TYPE_LONGHAUL_V2: + printk ("Longhaul v%d supported.\n", longhaul_version); + break; + case TYPE_POWERSAVER: + printk ("Powersaver supported.\n"); + break; + }; + + /* Doesn't hurt */ + longhaul_setup_southbridge(); + + /* Find ACPI data for processor */ + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, &longhaul_walk_callback, + NULL, (void *)&pr); + + /* Check ACPI support for C3 state */ + if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { + cx = &pr->power.states[ACPI_STATE_C3]; + if (cx->address > 0 && cx->latency <= 1000) + longhaul_flags |= USE_ACPI_C3; + } + /* Disable if it isn't working */ + if (disable_acpi_c3) + longhaul_flags &= ~USE_ACPI_C3; + /* Check if northbridge is friendly */ + if (enable_arbiter_disable()) + longhaul_flags |= USE_NORTHBRIDGE; + + /* Check ACPI support for bus master arbiter disable */ + if (!(longhaul_flags & USE_ACPI_C3 + || longhaul_flags & USE_NORTHBRIDGE) + && ((pr == NULL) || !(pr->flags.bm_control))) { + printk(KERN_ERR PFX + "No ACPI support. Unsupported northbridge.\n"); + return -ENODEV; + } + + if (longhaul_flags & USE_NORTHBRIDGE) + printk(KERN_INFO PFX "Using northbridge support.\n"); + if (longhaul_flags & USE_ACPI_C3) + printk(KERN_INFO PFX "Using ACPI support.\n"); + + ret = longhaul_get_ranges(); + if (ret != 0) + return ret; + + if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) + longhaul_setup_voltagescaling(); + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 200000; /* nsec */ + policy->cur = calc_speed(longhaul_get_cpu_mult()); + + ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table); + if (ret) + return ret; + + cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu); + + return 0; +} + +static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct freq_attr* longhaul_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver longhaul_driver = { + .verify = longhaul_verify, + .target = longhaul_target, + .get = longhaul_get, + .init = longhaul_cpu_init, + .exit = __devexit_p(longhaul_cpu_exit), + .name = "longhaul", + .owner = THIS_MODULE, + .attr = longhaul_attr, +}; + + +static int __init longhaul_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6) + return -ENODEV; + +#ifdef CONFIG_SMP + if (num_online_cpus() > 1) { + printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n"); + return -ENODEV; + } +#endif +#ifdef CONFIG_X86_IO_APIC + if (cpu_has_apic) { + printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n"); + return -ENODEV; + } +#endif + switch (c->x86_model) { + case 6 ... 9: + return cpufreq_register_driver(&longhaul_driver); + case 10: + printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n"); + default: + ;; + } + + return -ENODEV; +} + + +static void __exit longhaul_exit(void) +{ + int i; + + for (i=0; i < numscales; i++) { + if (clock_ratio[i] == maxmult) { + longhaul_setstate(i); + break; + } + } + + cpufreq_unregister_driver(&longhaul_driver); + kfree(longhaul_table); +} + +/* Even if BIOS is exporting ACPI C3 state, and it is used + * with success when CPU is idle, this state doesn't + * trigger frequency transition in some cases. */ +module_param (disable_acpi_c3, int, 0644); +MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); +/* Change CPU voltage with frequency. Very usefull to save + * power, but most VIA C3 processors aren't supporting it. */ +module_param (scale_voltage, int, 0644); +MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); +/* Force revision key to 0 for processors which doesn't + * support voltage scaling, but are introducing itself as + * such. */ +module_param(revid_errata, int, 0644); +MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID"); + +MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>"); +MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors."); +MODULE_LICENSE ("GPL"); + +late_initcall(longhaul_init); +module_exit(longhaul_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h new file mode 100644 index 000000000000..4fcc320997df --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.h @@ -0,0 +1,353 @@ +/* + * longhaul.h + * (C) 2003 Dave Jones. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * VIA-specific information + */ + +union msr_bcr2 { + struct { + unsigned Reseved:19, // 18:0 + ESOFTBF:1, // 19 + Reserved2:3, // 22:20 + CLOCKMUL:4, // 26:23 + Reserved3:5; // 31:27 + } bits; + unsigned long val; +}; + +union msr_longhaul { + struct { + unsigned RevisionID:4, // 3:0 + RevisionKey:4, // 7:4 + EnableSoftBusRatio:1, // 8 + EnableSoftVID:1, // 9 + EnableSoftBSEL:1, // 10 + Reserved:3, // 11:13 + SoftBusRatio4:1, // 14 + VRMRev:1, // 15 + SoftBusRatio:4, // 19:16 + SoftVID:5, // 24:20 + Reserved2:3, // 27:25 + SoftBSEL:2, // 29:28 + Reserved3:2, // 31:30 + MaxMHzBR:4, // 35:32 + MaximumVID:5, // 40:36 + MaxMHzFSB:2, // 42:41 + MaxMHzBR4:1, // 43 + Reserved4:4, // 47:44 + MinMHzBR:4, // 51:48 + MinimumVID:5, // 56:52 + MinMHzFSB:2, // 58:57 + MinMHzBR4:1, // 59 + Reserved5:4; // 63:60 + } bits; + unsigned long long val; +}; + +/* + * Clock ratio tables. Div/Mod by 10 to get ratio. + * The eblcr ones specify the ratio read from the CPU. + * The clock_ratio ones specify what to write to the CPU. + */ + +/* + * VIA C3 Samuel 1 & Samuel 2 (stepping 0) + */ +static const int __initdata samuel1_clock_ratio[16] = { + -1, /* 0000 -> RESERVED */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + -1, /* 0011 -> RESERVED */ + -1, /* 0100 -> RESERVED */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + -1, /* 1110 -> RESERVED */ + -1, /* 1111 -> RESERVED */ +}; + +static const int __initdata samuel1_eblcr[16] = { + 50, /* 0000 -> RESERVED */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + -1, /* 0011 -> RESERVED */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + -1, /* 0111 -> RESERVED */ + -1, /* 1000 -> RESERVED */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + -1, /* 1100 -> RESERVED */ + 75, /* 1101 -> 7.5x */ + -1, /* 1110 -> RESERVED */ + 65, /* 1111 -> 6.5x */ +}; + +/* + * VIA C3 Samuel2 Stepping 1->15 + */ +static const int __initdata samuel2_eblcr[16] = { + 50, /* 0000 -> 5.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 110, /* 0111 -> 11.0x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 130, /* 1110 -> 13.0x */ + 65, /* 1111 -> 6.5x */ +}; + +/* + * VIA C3 Ezra + */ +static const int __initdata ezra_clock_ratio[16] = { + 100, /* 0000 -> 10.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 90, /* 0011 -> 9.0x */ + 95, /* 0100 -> 9.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 120, /* 1111 -> 12.0x */ +}; + +static const int __initdata ezra_eblcr[16] = { + 50, /* 0000 -> 5.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 95, /* 0111 -> 9.5x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 65, /* 1111 -> 6.5x */ +}; + +/* + * VIA C3 (Ezra-T) [C5M]. + */ +static const int __initdata ezrat_clock_ratio[32] = { + 100, /* 0000 -> 10.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 90, /* 0011 -> 9.0x */ + 95, /* 0100 -> 9.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 120, /* 1111 -> 12.0x */ + + -1, /* 0000 -> RESERVED (10.0x) */ + 110, /* 0001 -> 11.0x */ + -1, /* 0010 -> 12.0x */ + -1, /* 0011 -> RESERVED (9.0x)*/ + 105, /* 0100 -> 10.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 135, /* 0111 -> 13.5x */ + 140, /* 1000 -> 14.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 130, /* 1011 -> 13.0x */ + 145, /* 1100 -> 14.5x */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + -1, /* 1111 -> RESERVED (12.0x) */ +}; + +static const int __initdata ezrat_eblcr[32] = { + 50, /* 0000 -> 5.0x */ + 30, /* 0001 -> 3.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + 35, /* 0101 -> 3.5x */ + 45, /* 0110 -> 4.5x */ + 95, /* 0111 -> 9.5x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 65, /* 1111 -> 6.5x */ + + -1, /* 0000 -> RESERVED (9.0x) */ + 110, /* 0001 -> 11.0x */ + 120, /* 0010 -> 12.0x */ + -1, /* 0011 -> RESERVED (10.0x)*/ + 135, /* 0100 -> 13.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 105, /* 0111 -> 10.5x */ + 130, /* 1000 -> 13.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 140, /* 1011 -> 14.0x */ + -1, /* 1100 -> RESERVED (12.0x) */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + 145, /* 1111 -> 14.5x */ +}; + +/* + * VIA C3 Nehemiah */ + +static const int __initdata nehemiah_clock_ratio[32] = { + 100, /* 0000 -> 10.0x */ + -1, /* 0001 -> 16.0x */ + 40, /* 0010 -> 4.0x */ + 90, /* 0011 -> 9.0x */ + 95, /* 0100 -> 9.5x */ + -1, /* 0101 -> RESERVED */ + 45, /* 0110 -> 4.5x */ + 55, /* 0111 -> 5.5x */ + 60, /* 1000 -> 6.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 50, /* 1011 -> 5.0x */ + 65, /* 1100 -> 6.5x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 120, /* 1111 -> 12.0x */ + -1, /* 0000 -> 10.0x */ + 110, /* 0001 -> 11.0x */ + -1, /* 0010 -> 12.0x */ + -1, /* 0011 -> 9.0x */ + 105, /* 0100 -> 10.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 135, /* 0111 -> 13.5x */ + 140, /* 1000 -> 14.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 130, /* 1011 -> 13.0x */ + 145, /* 1100 -> 14.5x */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + -1, /* 1111 -> 12.0x */ +}; + +static const int __initdata nehemiah_eblcr[32] = { + 50, /* 0000 -> 5.0x */ + 160, /* 0001 -> 16.0x */ + 40, /* 0010 -> 4.0x */ + 100, /* 0011 -> 10.0x */ + 55, /* 0100 -> 5.5x */ + -1, /* 0101 -> RESERVED */ + 45, /* 0110 -> 4.5x */ + 95, /* 0111 -> 9.5x */ + 90, /* 1000 -> 9.0x */ + 70, /* 1001 -> 7.0x */ + 80, /* 1010 -> 8.0x */ + 60, /* 1011 -> 6.0x */ + 120, /* 1100 -> 12.0x */ + 75, /* 1101 -> 7.5x */ + 85, /* 1110 -> 8.5x */ + 65, /* 1111 -> 6.5x */ + 90, /* 0000 -> 9.0x */ + 110, /* 0001 -> 11.0x */ + 120, /* 0010 -> 12.0x */ + 100, /* 0011 -> 10.0x */ + 135, /* 0100 -> 13.5x */ + 115, /* 0101 -> 11.5x */ + 125, /* 0110 -> 12.5x */ + 105, /* 0111 -> 10.5x */ + 130, /* 1000 -> 13.0x */ + 150, /* 1001 -> 15.0x */ + 160, /* 1010 -> 16.0x */ + 140, /* 1011 -> 14.0x */ + 120, /* 1100 -> 12.0x */ + 155, /* 1101 -> 15.5x */ + -1, /* 1110 -> RESERVED (13.0x) */ + 145 /* 1111 -> 14.5x */ +}; + +/* + * Voltage scales. Div/Mod by 1000 to get actual voltage. + * Which scale to use depends on the VRM type in use. + */ + +struct mV_pos { + unsigned short mV; + unsigned short pos; +}; + +static const struct mV_pos __initdata vrm85_mV[32] = { + {1250, 8}, {1200, 6}, {1150, 4}, {1100, 2}, + {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26}, + {1650, 24}, {1600, 22}, {1550, 20}, {1500, 18}, + {1450, 16}, {1400, 14}, {1350, 12}, {1300, 10}, + {1275, 9}, {1225, 7}, {1175, 5}, {1125, 3}, + {1075, 1}, {1825, 31}, {1775, 29}, {1725, 27}, + {1675, 25}, {1625, 23}, {1575, 21}, {1525, 19}, + {1475, 17}, {1425, 15}, {1375, 13}, {1325, 11} +}; + +static const unsigned char __initdata mV_vrm85[32] = { + 0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11, + 0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d, + 0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19, + 0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15 +}; + +static const struct mV_pos __initdata mobilevrm_mV[32] = { + {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28}, + {1550, 27}, {1500, 26}, {1450, 25}, {1400, 24}, + {1350, 23}, {1300, 22}, {1250, 21}, {1200, 20}, + {1150, 19}, {1100, 18}, {1050, 17}, {1000, 16}, + {975, 15}, {950, 14}, {925, 13}, {900, 12}, + {875, 11}, {850, 10}, {825, 9}, {800, 8}, + {775, 7}, {750, 6}, {725, 5}, {700, 4}, + {675, 3}, {650, 2}, {625, 1}, {600, 0} +}; + +static const unsigned char __initdata mV_mobilevrm[32] = { + 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, + 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, + 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, + 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00 +}; + diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c new file mode 100644 index 000000000000..b2689514295a --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/longrun.c @@ -0,0 +1,325 @@ +/* + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Licensed under the terms of the GNU GPL License version 2. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> + +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/timex.h> + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg) + +static struct cpufreq_driver longrun_driver; + +/** + * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz + * values into per cent values. In TMTA microcode, the following is valid: + * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) + */ +static unsigned int longrun_low_freq, longrun_high_freq; + + +/** + * longrun_get_policy - get the current LongRun policy + * @policy: struct cpufreq_policy where current policy is written into + * + * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS + * and MSR_TMTA_LONGRUN_CTRL + */ +static void __init longrun_get_policy(struct cpufreq_policy *policy) +{ + u32 msr_lo, msr_hi; + + rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); + dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi); + if (msr_lo & 0x01) + policy->policy = CPUFREQ_POLICY_PERFORMANCE; + else + policy->policy = CPUFREQ_POLICY_POWERSAVE; + + rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi); + msr_lo &= 0x0000007F; + msr_hi &= 0x0000007F; + + if ( longrun_high_freq <= longrun_low_freq ) { + /* Assume degenerate Longrun table */ + policy->min = policy->max = longrun_high_freq; + } else { + policy->min = longrun_low_freq + msr_lo * + ((longrun_high_freq - longrun_low_freq) / 100); + policy->max = longrun_low_freq + msr_hi * + ((longrun_high_freq - longrun_low_freq) / 100); + } + policy->cpu = 0; +} + + +/** + * longrun_set_policy - sets a new CPUFreq policy + * @policy: new policy + * + * Sets a new CPUFreq policy on LongRun-capable processors. This function + * has to be called with cpufreq_driver locked. + */ +static int longrun_set_policy(struct cpufreq_policy *policy) +{ + u32 msr_lo, msr_hi; + u32 pctg_lo, pctg_hi; + + if (!policy) + return -EINVAL; + + if ( longrun_high_freq <= longrun_low_freq ) { + /* Assume degenerate Longrun table */ + pctg_lo = pctg_hi = 100; + } else { + pctg_lo = (policy->min - longrun_low_freq) / + ((longrun_high_freq - longrun_low_freq) / 100); + pctg_hi = (policy->max - longrun_low_freq) / + ((longrun_high_freq - longrun_low_freq) / 100); + } + + if (pctg_hi > 100) + pctg_hi = 100; + if (pctg_lo > pctg_hi) + pctg_lo = pctg_hi; + + /* performance or economy mode */ + rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); + msr_lo &= 0xFFFFFFFE; + switch (policy->policy) { + case CPUFREQ_POLICY_PERFORMANCE: + msr_lo |= 0x00000001; + break; + case CPUFREQ_POLICY_POWERSAVE: + break; + } + wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); + + /* lower and upper boundary */ + rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + msr_lo &= 0xFFFFFF80; + msr_hi &= 0xFFFFFF80; + msr_lo |= pctg_lo; + msr_hi |= pctg_hi; + wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + + return 0; +} + + +/** + * longrun_verify_poliy - verifies a new CPUFreq policy + * @policy: the policy to verify + * + * Validates a new CPUFreq policy. This function has to be called with + * cpufreq_driver locked. + */ +static int longrun_verify_policy(struct cpufreq_policy *policy) +{ + if (!policy) + return -EINVAL; + + policy->cpu = 0; + cpufreq_verify_within_limits(policy, + policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); + + if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) && + (policy->policy != CPUFREQ_POLICY_PERFORMANCE)) + return -EINVAL; + + return 0; +} + +static unsigned int longrun_get(unsigned int cpu) +{ + u32 eax, ebx, ecx, edx; + + if (cpu) + return 0; + + cpuid(0x80860007, &eax, &ebx, &ecx, &edx); + dprintk("cpuid eax is %u\n", eax); + + return (eax * 1000); +} + +/** + * longrun_determine_freqs - determines the lowest and highest possible core frequency + * @low_freq: an int to put the lowest frequency into + * @high_freq: an int to put the highest frequency into + * + * Determines the lowest and highest possible core frequencies on this CPU. + * This is necessary to calculate the performance percentage according to + * TMTA rules: + * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq) + */ +static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, + unsigned int *high_freq) +{ + u32 msr_lo, msr_hi; + u32 save_lo, save_hi; + u32 eax, ebx, ecx, edx; + u32 try_hi; + struct cpuinfo_x86 *c = cpu_data; + + if (!low_freq || !high_freq) + return -EINVAL; + + if (cpu_has(c, X86_FEATURE_LRTI)) { + /* if the LongRun Table Interface is present, the + * detection is a bit easier: + * For minimum frequency, read out the maximum + * level (msr_hi), write that into "currently + * selected level", and read out the frequency. + * For maximum frequency, read out level zero. + */ + /* minimum */ + rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi); + wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi); + rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); + *low_freq = msr_lo * 1000; /* to kHz */ + + /* maximum */ + wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi); + rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); + *high_freq = msr_lo * 1000; /* to kHz */ + + dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq); + + if (*low_freq > *high_freq) + *low_freq = *high_freq; + return 0; + } + + /* set the upper border to the value determined during TSC init */ + *high_freq = (cpu_khz / 1000); + *high_freq = *high_freq * 1000; + dprintk("high frequency is %u kHz\n", *high_freq); + + /* get current borders */ + rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + save_lo = msr_lo & 0x0000007F; + save_hi = msr_hi & 0x0000007F; + + /* if current perf_pctg is larger than 90%, we need to decrease the + * upper limit to make the calculation more accurate. + */ + cpuid(0x80860007, &eax, &ebx, &ecx, &edx); + /* try decreasing in 10% steps, some processors react only + * on some barrier values */ + for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -=10) { + /* set to 0 to try_hi perf_pctg */ + msr_lo &= 0xFFFFFF80; + msr_hi &= 0xFFFFFF80; + msr_hi |= try_hi; + wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); + + /* read out current core MHz and current perf_pctg */ + cpuid(0x80860007, &eax, &ebx, &ecx, &edx); + + /* restore values */ + wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi); + } + dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax); + + /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) + * eqals + * low_freq * ( 1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) + * + * high_freq * perf_pctg is stored tempoarily into "ebx". + */ + ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */ + + if ((ecx > 95) || (ecx == 0) || (eax < ebx)) + return -EIO; + + edx = (eax - ebx) / (100 - ecx); + *low_freq = edx * 1000; /* back to kHz */ + + dprintk("low frequency is %u kHz\n", *low_freq); + + if (*low_freq > *high_freq) + *low_freq = *high_freq; + + return 0; +} + + +static int __init longrun_cpu_init(struct cpufreq_policy *policy) +{ + int result = 0; + + /* capability check */ + if (policy->cpu != 0) + return -ENODEV; + + /* detect low and high frequency */ + result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq); + if (result) + return result; + + /* cpuinfo and default policy values */ + policy->cpuinfo.min_freq = longrun_low_freq; + policy->cpuinfo.max_freq = longrun_high_freq; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + longrun_get_policy(policy); + + return 0; +} + + +static struct cpufreq_driver longrun_driver = { + .flags = CPUFREQ_CONST_LOOPS, + .verify = longrun_verify_policy, + .setpolicy = longrun_set_policy, + .get = longrun_get, + .init = longrun_cpu_init, + .name = "longrun", + .owner = THIS_MODULE, +}; + + +/** + * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver + * + * Initializes the LongRun support. + */ +static int __init longrun_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + if (c->x86_vendor != X86_VENDOR_TRANSMETA || + !cpu_has(c, X86_FEATURE_LONGRUN)) + return -ENODEV; + + return cpufreq_register_driver(&longrun_driver); +} + + +/** + * longrun_exit - unregisters LongRun support + */ +static void __exit longrun_exit(void) +{ + cpufreq_unregister_driver(&longrun_driver); +} + + +MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors."); +MODULE_LICENSE ("GPL"); + +module_init(longrun_init); +module_exit(longrun_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c new file mode 100644 index 000000000000..4c76b511e194 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -0,0 +1,316 @@ +/* + * Pentium 4/Xeon CPU on demand clock modulation/speed scaling + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> + * (C) 2002 Arjan van de Ven <arjanv@redhat.com> + * (C) 2002 Tora T. Engstad + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The author(s) of this software shall not be held liable for damages + * of any nature resulting due to the use of this software. This + * software is provided AS-IS with no warranties. + * + * Date Errata Description + * 20020525 N44, O17 12.5% or 25% DC causes lockup + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> +#include <linux/cpumask.h> + +#include <asm/processor.h> +#include <asm/msr.h> +#include <asm/timex.h> + +#include "speedstep-lib.h" + +#define PFX "p4-clockmod: " +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg) + +/* + * Duty Cycle (3bits), note DC_DISABLE is not specified in + * intel docs i just use it to mean disable + */ +enum { + DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT, + DC_64PT, DC_75PT, DC_88PT, DC_DISABLE +}; + +#define DC_ENTRIES 8 + + +static int has_N44_O17_errata[NR_CPUS]; +static unsigned int stock_freq; +static struct cpufreq_driver p4clockmod_driver; +static unsigned int cpufreq_p4_get(unsigned int cpu); + +static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) +{ + u32 l, h; + + if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV)) + return -EINVAL; + + rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); + + if (l & 0x01) + dprintk("CPU#%d currently thermal throttled\n", cpu); + + if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT)) + newstate = DC_38PT; + + rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); + if (newstate == DC_DISABLE) { + dprintk("CPU#%d disabling modulation\n", cpu); + wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); + } else { + dprintk("CPU#%d setting duty cycle to %d%%\n", + cpu, ((125 * newstate) / 10)); + /* bits 63 - 5 : reserved + * bit 4 : enable/disable + * bits 3-1 : duty cycle + * bit 0 : reserved + */ + l = (l & ~14); + l = l | (1<<4) | ((newstate & 0x7)<<1); + wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); + } + + return 0; +} + + +static struct cpufreq_frequency_table p4clockmod_table[] = { + {DC_RESV, CPUFREQ_ENTRY_INVALID}, + {DC_DFLT, 0}, + {DC_25PT, 0}, + {DC_38PT, 0}, + {DC_50PT, 0}, + {DC_64PT, 0}, + {DC_75PT, 0}, + {DC_88PT, 0}, + {DC_DISABLE, 0}, + {DC_RESV, CPUFREQ_TABLE_END}, +}; + + +static int cpufreq_p4_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = DC_RESV; + struct cpufreq_freqs freqs; + int i; + + if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate)) + return -EINVAL; + + freqs.old = cpufreq_p4_get(policy->cpu); + freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; + + if (freqs.new == freqs.old) + return 0; + + /* notifiers */ + for_each_cpu_mask(i, policy->cpus) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } + + /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software + * Developer's Manual, Volume 3 + */ + for_each_cpu_mask(i, policy->cpus) + cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); + + /* notifiers */ + for_each_cpu_mask(i, policy->cpus) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + + return 0; +} + + +static int cpufreq_p4_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]); +} + + +static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) +{ + if (c->x86 == 0x06) { + if (cpu_has(c, X86_FEATURE_EST)) + printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. " + "The acpi-cpufreq module offers voltage scaling" + " in addition of frequency scaling. You should use " + "that instead of p4-clockmod, if possible.\n"); + switch (c->x86_model) { + case 0x0E: /* Core */ + case 0x0F: /* Core Duo */ + p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; + return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE); + case 0x0D: /* Pentium M (Dothan) */ + p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; + /* fall through */ + case 0x09: /* Pentium M (Banias) */ + return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM); + } + } + + if (c->x86 != 0xF) { + printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n"); + return 0; + } + + /* on P-4s, the TSC runs with constant frequency independent whether + * throttling is active or not. */ + p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; + + if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) { + printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " + "The speedstep-ich or acpi cpufreq modules offer " + "voltage scaling in addition of frequency scaling. " + "You should use either one instead of p4-clockmod, " + "if possible.\n"); + return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M); + } + + return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D); +} + + + +static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = &cpu_data[policy->cpu]; + int cpuid = 0; + unsigned int i; + +#ifdef CONFIG_SMP + policy->cpus = cpu_sibling_map[policy->cpu]; +#endif + + /* Errata workaround */ + cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask; + switch (cpuid) { + case 0x0f07: + case 0x0f0a: + case 0x0f11: + case 0x0f12: + has_N44_O17_errata[policy->cpu] = 1; + dprintk("has errata -- disabling low frequencies\n"); + } + + /* get max frequency */ + stock_freq = cpufreq_p4_get_frequency(c); + if (!stock_freq) + return -EINVAL; + + /* table init */ + for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { + if ((i<2) && (has_N44_O17_errata[policy->cpu])) + p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; + else + p4clockmod_table[i].frequency = (stock_freq * i)/8; + } + cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 1000000; /* assumed */ + policy->cur = stock_freq; + + return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]); +} + + +static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static unsigned int cpufreq_p4_get(unsigned int cpu) +{ + u32 l, h; + + rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); + + if (l & 0x10) { + l = l >> 1; + l &= 0x7; + } else + l = DC_DISABLE; + + if (l != DC_DISABLE) + return (stock_freq * l / 8); + + return stock_freq; +} + +static struct freq_attr* p4clockmod_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver p4clockmod_driver = { + .verify = cpufreq_p4_verify, + .target = cpufreq_p4_target, + .init = cpufreq_p4_cpu_init, + .exit = cpufreq_p4_cpu_exit, + .get = cpufreq_p4_get, + .name = "p4-clockmod", + .owner = THIS_MODULE, + .attr = p4clockmod_attr, +}; + + +static int __init cpufreq_p4_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + int ret; + + /* + * THERM_CONTROL is architectural for IA32 now, so + * we can rely on the capability checks + */ + if (c->x86_vendor != X86_VENDOR_INTEL) + return -ENODEV; + + if (!test_bit(X86_FEATURE_ACPI, c->x86_capability) || + !test_bit(X86_FEATURE_ACC, c->x86_capability)) + return -ENODEV; + + ret = cpufreq_register_driver(&p4clockmod_driver); + if (!ret) + printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); + + return (ret); +} + + +static void __exit cpufreq_p4_exit(void) +{ + cpufreq_unregister_driver(&p4clockmod_driver); +} + + +MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>"); +MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); +MODULE_LICENSE ("GPL"); + +late_initcall(cpufreq_p4_init); +module_exit(cpufreq_p4_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c new file mode 100644 index 000000000000..f89524051e4a --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c @@ -0,0 +1,256 @@ +/* + * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) + * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/ioport.h> +#include <linux/slab.h> + +#include <asm/msr.h> +#include <asm/timex.h> +#include <asm/io.h> + + +#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long + as it is unused */ + +static unsigned int busfreq; /* FSB, in 10 kHz */ +static unsigned int max_multiplier; + + +/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */ +static struct cpufreq_frequency_table clock_ratio[] = { + {45, /* 000 -> 4.5x */ 0}, + {50, /* 001 -> 5.0x */ 0}, + {40, /* 010 -> 4.0x */ 0}, + {55, /* 011 -> 5.5x */ 0}, + {20, /* 100 -> 2.0x */ 0}, + {30, /* 101 -> 3.0x */ 0}, + {60, /* 110 -> 6.0x */ 0}, + {35, /* 111 -> 3.5x */ 0}, + {0, CPUFREQ_TABLE_END} +}; + + +/** + * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier + * + * Returns the current setting of the frequency multiplier. Core clock + * speed is frequency of the Front-Side Bus multiplied with this value. + */ +static int powernow_k6_get_cpu_multiplier(void) +{ + u64 invalue = 0; + u32 msrval; + + msrval = POWERNOW_IOPORT + 0x1; + wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ + invalue=inl(POWERNOW_IOPORT + 0x8); + msrval = POWERNOW_IOPORT + 0x0; + wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ + + return clock_ratio[(invalue >> 5)&7].index; +} + + +/** + * powernow_k6_set_state - set the PowerNow! multiplier + * @best_i: clock_ratio[best_i] is the target multiplier + * + * Tries to change the PowerNow! multiplier + */ +static void powernow_k6_set_state (unsigned int best_i) +{ + unsigned long outvalue=0, invalue=0; + unsigned long msrval; + struct cpufreq_freqs freqs; + + if (clock_ratio[best_i].index > max_multiplier) { + printk(KERN_ERR "cpufreq: invalid target frequency\n"); + return; + } + + freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); + freqs.new = busfreq * clock_ratio[best_i].index; + freqs.cpu = 0; /* powernow-k6.c is UP only driver */ + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* we now need to transform best_i to the BVC format, see AMD#23446 */ + + outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5); + + msrval = POWERNOW_IOPORT + 0x1; + wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ + invalue=inl(POWERNOW_IOPORT + 0x8); + invalue = invalue & 0xf; + outvalue = outvalue | invalue; + outl(outvalue ,(POWERNOW_IOPORT + 0x8)); + msrval = POWERNOW_IOPORT + 0x0; + wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return; +} + + +/** + * powernow_k6_verify - verifies a new CPUfreq policy + * @policy: new policy + * + * Policy must be within lowest and highest possible CPU Frequency, + * and at least one possible state must be within min and max. + */ +static int powernow_k6_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &clock_ratio[0]); +} + + +/** + * powernow_k6_setpolicy - sets a new CPUFreq policy + * @policy: new policy + * @target_freq: the target frequency + * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * + * sets a new CPUFreq policy + */ +static int powernow_k6_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate)) + return -EINVAL; + + powernow_k6_set_state(newstate); + + return 0; +} + + +static int powernow_k6_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int i; + int result; + + if (policy->cpu != 0) + return -ENODEV; + + /* get frequencies */ + max_multiplier = powernow_k6_get_cpu_multiplier(); + busfreq = cpu_khz / max_multiplier; + + /* table init */ + for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { + if (clock_ratio[i].index > max_multiplier) + clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; + else + clock_ratio[i].frequency = busfreq * clock_ratio[i].index; + } + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = busfreq * max_multiplier; + + result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu); + + return 0; +} + + +static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int i; + for (i=0; i<8; i++) { + if (i==max_multiplier) + powernow_k6_set_state(i); + } + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static unsigned int powernow_k6_get(unsigned int cpu) +{ + return busfreq * powernow_k6_get_cpu_multiplier(); +} + +static struct freq_attr* powernow_k6_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver powernow_k6_driver = { + .verify = powernow_k6_verify, + .target = powernow_k6_target, + .init = powernow_k6_cpu_init, + .exit = powernow_k6_cpu_exit, + .get = powernow_k6_get, + .name = "powernow-k6", + .owner = THIS_MODULE, + .attr = powernow_k6_attr, +}; + + +/** + * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver + * + * Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported + * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero + * on success. + */ +static int __init powernow_k6_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) || + ((c->x86_model != 12) && (c->x86_model != 13))) + return -ENODEV; + + if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { + printk("cpufreq: PowerNow IOPORT region already used.\n"); + return -EIO; + } + + if (cpufreq_register_driver(&powernow_k6_driver)) { + release_region (POWERNOW_IOPORT, 16); + return -EINVAL; + } + + return 0; +} + + +/** + * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support + * + * Unregisters AMD K6-2+ / K6-3+ PowerNow! support. + */ +static void __exit powernow_k6_exit(void) +{ + cpufreq_unregister_driver(&powernow_k6_driver); + release_region (POWERNOW_IOPORT, 16); +} + + +MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); +MODULE_LICENSE ("GPL"); + +module_init(powernow_k6_init); +module_exit(powernow_k6_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c new file mode 100644 index 000000000000..ca3e1d341889 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -0,0 +1,703 @@ +/* + * AMD K7 Powernow driver. + * (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs. + * (C) 2003-2004 Dave Jones <davej@redhat.com> + * + * Licensed under the terms of the GNU GPL License version 2. + * Based upon datasheets & sample CPUs kindly provided by AMD. + * + * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt. + * - We cli/sti on stepping A0 CPUs around the FID/VID transition. + * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect. + * - We disable half multipliers if ACPI is used on A0 stepping CPUs. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/dmi.h> + +#include <asm/msr.h> +#include <asm/timer.h> +#include <asm/timex.h> +#include <asm/io.h> +#include <asm/system.h> + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI +#include <linux/acpi.h> +#include <acpi/processor.h> +#endif + +#include "powernow-k7.h" + +#define PFX "powernow: " + + +struct psb_s { + u8 signature[10]; + u8 tableversion; + u8 flags; + u16 settlingtime; + u8 reserved1; + u8 numpst; +}; + +struct pst_s { + u32 cpuid; + u8 fsbspeed; + u8 maxfid; + u8 startvid; + u8 numpstates; +}; + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI +union powernow_acpi_control_t { + struct { + unsigned long fid:5, + vid:5, + sgtc:20, + res1:2; + } bits; + unsigned long val; +}; +#endif + +#ifdef CONFIG_CPU_FREQ_DEBUG +/* divide by 1000 to get VCore voltage in V. */ +static const int mobile_vid_table[32] = { + 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, + 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, + 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, + 1075, 1050, 1025, 1000, 975, 950, 925, 0, +}; +#endif + +/* divide by 10 to get FID. */ +static const int fid_codes[32] = { + 110, 115, 120, 125, 50, 55, 60, 65, + 70, 75, 80, 85, 90, 95, 100, 105, + 30, 190, 40, 200, 130, 135, 140, 210, + 150, 225, 160, 165, 170, 180, -1, -1, +}; + +/* This parameter is used in order to force ACPI instead of legacy method for + * configuration purpose. + */ + +static int acpi_force; + +static struct cpufreq_frequency_table *powernow_table; + +static unsigned int can_scale_bus; +static unsigned int can_scale_vid; +static unsigned int minimum_speed=-1; +static unsigned int maximum_speed; +static unsigned int number_scales; +static unsigned int fsb; +static unsigned int latency; +static char have_a0; + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg) + +static int check_fsb(unsigned int fsbspeed) +{ + int delta; + unsigned int f = fsb / 1000; + + delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; + return (delta < 5); +} + +static int check_powernow(void) +{ + struct cpuinfo_x86 *c = cpu_data; + unsigned int maxei, eax, ebx, ecx, edx; + + if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) { +#ifdef MODULE + printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n"); +#endif + return 0; + } + + /* Get maximum capabilities */ + maxei = cpuid_eax (0x80000000); + if (maxei < 0x80000007) { /* Any powernow info ? */ +#ifdef MODULE + printk (KERN_INFO PFX "No powernow capabilities detected\n"); +#endif + return 0; + } + + if ((c->x86_model == 6) && (c->x86_mask == 0)) { + printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n"); + have_a0 = 1; + } + + cpuid(0x80000007, &eax, &ebx, &ecx, &edx); + + /* Check we can actually do something before we say anything.*/ + if (!(edx & (1 << 1 | 1 << 2))) + return 0; + + printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); + + if (edx & 1 << 1) { + printk ("frequency"); + can_scale_bus=1; + } + + if ((edx & (1 << 1 | 1 << 2)) == 0x6) + printk (" and "); + + if (edx & 1 << 2) { + printk ("voltage"); + can_scale_vid=1; + } + + printk (".\n"); + return 1; +} + + +static int get_ranges (unsigned char *pst) +{ + unsigned int j; + unsigned int speed; + u8 fid, vid; + + powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); + if (!powernow_table) + return -ENOMEM; + + for (j=0 ; j < number_scales; j++) { + fid = *pst++; + + powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; + powernow_table[j].index = fid; /* lower 8 bits */ + + speed = powernow_table[j].frequency; + + if ((fid_codes[fid] % 10)==5) { +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + if (have_a0 == 1) + powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID; +#endif + } + + if (speed < minimum_speed) + minimum_speed = speed; + if (speed > maximum_speed) + maximum_speed = speed; + + vid = *pst++; + powernow_table[j].index |= (vid << 8); /* upper 8 bits */ + + dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed/1000, vid, + mobile_vid_table[vid]/1000, + mobile_vid_table[vid]%1000); + } + powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; + powernow_table[number_scales].index = 0; + + return 0; +} + + +static void change_FID(int fid) +{ + union msr_fidvidctl fidvidctl; + + rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + if (fidvidctl.bits.FID != fid) { + fidvidctl.bits.SGTC = latency; + fidvidctl.bits.FID = fid; + fidvidctl.bits.VIDC = 0; + fidvidctl.bits.FIDC = 1; + wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + } +} + + +static void change_VID(int vid) +{ + union msr_fidvidctl fidvidctl; + + rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + if (fidvidctl.bits.VID != vid) { + fidvidctl.bits.SGTC = latency; + fidvidctl.bits.VID = vid; + fidvidctl.bits.FIDC = 0; + fidvidctl.bits.VIDC = 1; + wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + } +} + + +static void change_speed (unsigned int index) +{ + u8 fid, vid; + struct cpufreq_freqs freqs; + union msr_fidvidstatus fidvidstatus; + int cfid; + + /* fid are the lower 8 bits of the index we stored into + * the cpufreq frequency table in powernow_decode_bios, + * vid are the upper 8 bits. + */ + + fid = powernow_table[index].index & 0xFF; + vid = (powernow_table[index].index & 0xFF00) >> 8; + + freqs.cpu = 0; + + rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + cfid = fidvidstatus.bits.CFID; + freqs.old = fsb * fid_codes[cfid] / 10; + + freqs.new = powernow_table[index].frequency; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Now do the magic poking into the MSRs. */ + + if (have_a0 == 1) /* A0 errata 5 */ + local_irq_disable(); + + if (freqs.old > freqs.new) { + /* Going down, so change FID first */ + change_FID(fid); + change_VID(vid); + } else { + /* Going up, so change VID first */ + change_VID(vid); + change_FID(fid); + } + + + if (have_a0 == 1) + local_irq_enable(); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +} + + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + +static struct acpi_processor_performance *acpi_processor_perf; + +static int powernow_acpi_init(void) +{ + int i; + int retval = 0; + union powernow_acpi_control_t pc; + + if (acpi_processor_perf != NULL && powernow_table != NULL) { + retval = -EINVAL; + goto err0; + } + + acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance), + GFP_KERNEL); + if (!acpi_processor_perf) { + retval = -ENOMEM; + goto err0; + } + + if (acpi_processor_register_performance(acpi_processor_perf, 0)) { + retval = -EIO; + goto err1; + } + + if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { + retval = -ENODEV; + goto err2; + } + + if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { + retval = -ENODEV; + goto err2; + } + + number_scales = acpi_processor_perf->state_count; + + if (number_scales < 2) { + retval = -ENODEV; + goto err2; + } + + powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); + if (!powernow_table) { + retval = -ENOMEM; + goto err2; + } + + pc.val = (unsigned long) acpi_processor_perf->states[0].control; + for (i = 0; i < number_scales; i++) { + u8 fid, vid; + struct acpi_processor_px *state = + &acpi_processor_perf->states[i]; + unsigned int speed, speed_mhz; + + pc.val = (unsigned long) state->control; + dprintk ("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", + i, + (u32) state->core_frequency, + (u32) state->power, + (u32) state->transition_latency, + (u32) state->control, + pc.bits.sgtc); + + vid = pc.bits.vid; + fid = pc.bits.fid; + + powernow_table[i].frequency = fsb * fid_codes[fid] / 10; + powernow_table[i].index = fid; /* lower 8 bits */ + powernow_table[i].index |= (vid << 8); /* upper 8 bits */ + + speed = powernow_table[i].frequency; + speed_mhz = speed / 1000; + + /* processor_perflib will multiply the MHz value by 1000 to + * get a KHz value (e.g. 1266000). However, powernow-k7 works + * with true KHz values (e.g. 1266768). To ensure that all + * powernow frequencies are available, we must ensure that + * ACPI doesn't restrict them, so we round up the MHz value + * to ensure that perflib's computed KHz value is greater than + * or equal to powernow's KHz value. + */ + if (speed % 1000 > 0) + speed_mhz++; + + if ((fid_codes[fid] % 10)==5) { + if (have_a0 == 1) + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + } + + dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " + "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, + fid_codes[fid] % 10, speed_mhz, vid, + mobile_vid_table[vid]/1000, + mobile_vid_table[vid]%1000); + + if (state->core_frequency != speed_mhz) { + state->core_frequency = speed_mhz; + dprintk(" Corrected ACPI frequency to %d\n", + speed_mhz); + } + + if (latency < pc.bits.sgtc) + latency = pc.bits.sgtc; + + if (speed < minimum_speed) + minimum_speed = speed; + if (speed > maximum_speed) + maximum_speed = speed; + } + + powernow_table[i].frequency = CPUFREQ_TABLE_END; + powernow_table[i].index = 0; + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + return 0; + +err2: + acpi_processor_unregister_performance(acpi_processor_perf, 0); +err1: + kfree(acpi_processor_perf); +err0: + printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n"); + acpi_processor_perf = NULL; + return retval; +} +#else +static int powernow_acpi_init(void) +{ + printk(KERN_INFO PFX "no support for ACPI processor found." + " Please recompile your kernel with ACPI processor\n"); + return -EINVAL; +} +#endif + +static int powernow_decode_bios (int maxfid, int startvid) +{ + struct psb_s *psb; + struct pst_s *pst; + unsigned int i, j; + unsigned char *p; + unsigned int etuple; + unsigned int ret; + + etuple = cpuid_eax(0x80000001); + + for (i=0xC0000; i < 0xffff0 ; i+=16) { + + p = phys_to_virt(i); + + if (memcmp(p, "AMDK7PNOW!", 10) == 0){ + dprintk ("Found PSB header at %p\n", p); + psb = (struct psb_s *) p; + dprintk ("Table version: 0x%x\n", psb->tableversion); + if (psb->tableversion != 0x12) { + printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n"); + return -ENODEV; + } + + dprintk ("Flags: 0x%x\n", psb->flags); + if ((psb->flags & 1)==0) { + dprintk ("Mobile voltage regulator\n"); + } else { + dprintk ("Desktop voltage regulator\n"); + } + + latency = psb->settlingtime; + if (latency < 100) { + printk (KERN_INFO PFX "BIOS set settling time to %d microseconds." + "Should be at least 100. Correcting.\n", latency); + latency = 100; + } + dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime); + dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst); + + p += sizeof (struct psb_s); + + pst = (struct pst_s *) p; + + for (j=0; j<psb->numpst; j++) { + pst = (struct pst_s *) p; + number_scales = pst->numpstates; + + if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) && + (maxfid==pst->maxfid) && (startvid==pst->startvid)) + { + dprintk ("PST:%d (@%p)\n", j, pst); + dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", + pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); + + ret = get_ranges ((char *) pst + sizeof (struct pst_s)); + return ret; + } else { + unsigned int k; + p = (char *) pst + sizeof (struct pst_s); + for (k=0; k<number_scales; k++) + p+=2; + } + } + printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple); + printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n"); + + return -EINVAL; + } + p++; + } + + return -ENODEV; +} + + +static int powernow_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate; + + if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate)) + return -EINVAL; + + change_speed(newstate); + + return 0; +} + + +static int powernow_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, powernow_table); +} + +/* + * We use the fact that the bus frequency is somehow + * a multiple of 100000/3 khz, then we compute sgtc according + * to this multiple. + * That way, we match more how AMD thinks all of that work. + * We will then get the same kind of behaviour already tested under + * the "well-known" other OS. + */ +static int __init fixup_sgtc(void) +{ + unsigned int sgtc; + unsigned int m; + + m = fsb / 3333; + if ((m % 10) >= 5) + m += 5; + + m /= 10; + + sgtc = 100 * m * latency; + sgtc = sgtc / 3; + if (sgtc > 0xfffff) { + printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc); + sgtc = 0xfffff; + } + return sgtc; +} + +static unsigned int powernow_get(unsigned int cpu) +{ + union msr_fidvidstatus fidvidstatus; + unsigned int cfid; + + if (cpu) + return 0; + rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + cfid = fidvidstatus.bits.CFID; + + return (fsb * fid_codes[cfid] / 10); +} + + +static int __init acer_cpufreq_pst(struct dmi_system_id *d) +{ + printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident); + printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); + printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n"); + return 0; +} + +/* + * Some Athlon laptops have really fucked PST tables. + * A BIOS update is all that can save them. + * Mention this, and disable cpufreq. + */ +static struct dmi_system_id __initdata powernow_dmi_table[] = { + { + .callback = acer_cpufreq_pst, + .ident = "Acer Aspire", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"), + DMI_MATCH(DMI_BIOS_VERSION, "3A71"), + }, + }, + { } +}; + +static int __init powernow_cpu_init (struct cpufreq_policy *policy) +{ + union msr_fidvidstatus fidvidstatus; + int result; + + if (policy->cpu != 0) + return -ENODEV; + + rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + + recalibrate_cpu_khz(); + + fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; + if (!fsb) { + printk(KERN_WARNING PFX "can not determine bus frequency\n"); + return -EINVAL; + } + dprintk("FSB: %3dMHz\n", fsb/1000); + + if (dmi_check_system(powernow_dmi_table) || acpi_force) { + printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); + result = powernow_acpi_init(); + } else { + result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID); + if (result) { + printk (KERN_INFO PFX "Trying ACPI perflib\n"); + maximum_speed = 0; + minimum_speed = -1; + latency = 0; + result = powernow_acpi_init(); + if (result) { + printk (KERN_INFO PFX "ACPI and legacy methods failed\n"); + printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n"); + } + } else { + /* SGTC use the bus clock as timer */ + latency = fixup_sgtc(); + printk(KERN_INFO PFX "SGTC: %d\n", latency); + } + } + + if (result) + return result; + + printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", + minimum_speed/1000, maximum_speed/1000); + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency); + + policy->cur = powernow_get(0); + + cpufreq_frequency_table_get_attr(powernow_table, policy->cpu); + + return cpufreq_frequency_table_cpuinfo(policy, powernow_table); +} + +static int powernow_cpu_exit (struct cpufreq_policy *policy) { + cpufreq_frequency_table_put_attr(policy->cpu); + +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + if (acpi_processor_perf) { + acpi_processor_unregister_performance(acpi_processor_perf, 0); + kfree(acpi_processor_perf); + } +#endif + + kfree(powernow_table); + return 0; +} + +static struct freq_attr* powernow_table_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver powernow_driver = { + .verify = powernow_verify, + .target = powernow_target, + .get = powernow_get, + .init = powernow_cpu_init, + .exit = powernow_cpu_exit, + .name = "powernow-k7", + .owner = THIS_MODULE, + .attr = powernow_table_attr, +}; + +static int __init powernow_init (void) +{ + if (check_powernow()==0) + return -ENODEV; + return cpufreq_register_driver(&powernow_driver); +} + + +static void __exit powernow_exit (void) +{ + cpufreq_unregister_driver(&powernow_driver); +} + +module_param(acpi_force, int, 0444); +MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); + +MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>"); +MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors."); +MODULE_LICENSE ("GPL"); + +late_initcall(powernow_init); +module_exit(powernow_exit); + diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h new file mode 100644 index 000000000000..f8a63b3664e3 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h @@ -0,0 +1,44 @@ +/* + * $Id: powernow-k7.h,v 1.2 2003/02/10 18:26:01 davej Exp $ + * (C) 2003 Dave Jones. + * + * Licensed under the terms of the GNU GPL License version 2. + * + * AMD-specific information + * + */ + +union msr_fidvidctl { + struct { + unsigned FID:5, // 4:0 + reserved1:3, // 7:5 + VID:5, // 12:8 + reserved2:3, // 15:13 + FIDC:1, // 16 + VIDC:1, // 17 + reserved3:2, // 19:18 + FIDCHGRATIO:1, // 20 + reserved4:11, // 31-21 + SGTC:20, // 32:51 + reserved5:12; // 63:52 + } bits; + unsigned long long val; +}; + +union msr_fidvidstatus { + struct { + unsigned CFID:5, // 4:0 + reserved1:3, // 7:5 + SFID:5, // 12:8 + reserved2:3, // 15:13 + MFID:5, // 20:16 + reserved3:11, // 31:21 + CVID:5, // 36:32 + reserved4:3, // 39:37 + SVID:5, // 44:40 + reserved5:3, // 47:45 + MVID:5, // 52:48 + reserved6:11; // 63:53 + } bits; + unsigned long long val; +}; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c new file mode 100644 index 000000000000..34ed53a06730 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -0,0 +1,1363 @@ +/* + * (c) 2003-2006 Advanced Micro Devices, Inc. + * Your use of this code is subject to the terms and conditions of the + * GNU general public license version 2. See "COPYING" or + * http://www.gnu.org/licenses/gpl.html + * + * Support : mark.langsdorf@amd.com + * + * Based on the powernow-k7.c module written by Dave Jones. + * (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs + * (C) 2004 Dominik Brodowski <linux@brodo.de> + * (C) 2004 Pavel Machek <pavel@suse.cz> + * Licensed under the terms of the GNU GPL License version 2. + * Based upon datasheets & sample CPUs kindly provided by AMD. + * + * Valuable input gratefully received from Dave Jones, Pavel Machek, + * Dominik Brodowski, Jacob Shin, and others. + * Originally developed by Paul Devriendt. + * Processor information obtained from Chapter 9 (Power and Thermal Management) + * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD + * Opteron Processors" available for download from www.amd.com + * + * Tables for specific CPUs can be inferred from + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf + */ + +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/cpumask.h> +#include <linux/sched.h> /* for current / set_cpus_allowed() */ + +#include <asm/msr.h> +#include <asm/io.h> +#include <asm/delay.h> + +#ifdef CONFIG_X86_POWERNOW_K8_ACPI +#include <linux/acpi.h> +#include <linux/mutex.h> +#include <acpi/processor.h> +#endif + +#define PFX "powernow-k8: " +#define BFX PFX "BIOS error: " +#define VERSION "version 2.00.00" +#include "powernow-k8.h" + +/* serialize freq changes */ +static DEFINE_MUTEX(fidvid_mutex); + +static struct powernow_k8_data *powernow_data[NR_CPUS]; + +static int cpu_family = CPU_OPTERON; + +#ifndef CONFIG_SMP +static cpumask_t cpu_core_map[1]; +#endif + +/* Return a frequency in MHz, given an input fid */ +static u32 find_freq_from_fid(u32 fid) +{ + return 800 + (fid * 100); +} + + +/* Return a frequency in KHz, given an input fid */ +static u32 find_khz_freq_from_fid(u32 fid) +{ + return 1000 * find_freq_from_fid(fid); +} + +/* Return a frequency in MHz, given an input fid and did */ +static u32 find_freq_from_fiddid(u32 fid, u32 did) +{ + return 100 * (fid + 0x10) >> did; +} + +static u32 find_khz_freq_from_fiddid(u32 fid, u32 did) +{ + return 1000 * find_freq_from_fiddid(fid, did); +} + +static u32 find_fid_from_pstate(u32 pstate) +{ + u32 hi, lo; + rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi); + return lo & HW_PSTATE_FID_MASK; +} + +static u32 find_did_from_pstate(u32 pstate) +{ + u32 hi, lo; + rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi); + return (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; +} + +/* Return the vco fid for an input fid + * + * Each "low" fid has corresponding "high" fid, and you can get to "low" fids + * only from corresponding high fids. This returns "high" fid corresponding to + * "low" one. + */ +static u32 convert_fid_to_vco_fid(u32 fid) +{ + if (fid < HI_FID_TABLE_BOTTOM) + return 8 + (2 * fid); + else + return fid; +} + +/* + * Return 1 if the pending bit is set. Unless we just instructed the processor + * to transition to a new state, seeing this bit set is really bad news. + */ +static int pending_bit_stuck(void) +{ + u32 lo, hi; + + if (cpu_family == CPU_HW_PSTATE) + return 0; + + rdmsr(MSR_FIDVID_STATUS, lo, hi); + return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0; +} + +/* + * Update the global current fid / vid values from the status msr. + * Returns 1 on error. + */ +static int query_current_values_with_pending_wait(struct powernow_k8_data *data) +{ + u32 lo, hi; + u32 i = 0; + + if (cpu_family == CPU_HW_PSTATE) { + rdmsr(MSR_PSTATE_STATUS, lo, hi); + i = lo & HW_PSTATE_MASK; + rdmsr(MSR_PSTATE_DEF_BASE + i, lo, hi); + data->currfid = lo & HW_PSTATE_FID_MASK; + data->currdid = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; + return 0; + } + do { + if (i++ > 10000) { + dprintk("detected change pending stuck\n"); + return 1; + } + rdmsr(MSR_FIDVID_STATUS, lo, hi); + } while (lo & MSR_S_LO_CHANGE_PENDING); + + data->currvid = hi & MSR_S_HI_CURRENT_VID; + data->currfid = lo & MSR_S_LO_CURRENT_FID; + + return 0; +} + +/* the isochronous relief time */ +static void count_off_irt(struct powernow_k8_data *data) +{ + udelay((1 << data->irt) * 10); + return; +} + +/* the voltage stabalization time */ +static void count_off_vst(struct powernow_k8_data *data) +{ + udelay(data->vstable * VST_UNITS_20US); + return; +} + +/* need to init the control msr to a safe value (for each cpu) */ +static void fidvid_msr_init(void) +{ + u32 lo, hi; + u8 fid, vid; + + rdmsr(MSR_FIDVID_STATUS, lo, hi); + vid = hi & MSR_S_HI_CURRENT_VID; + fid = lo & MSR_S_LO_CURRENT_FID; + lo = fid | (vid << MSR_C_LO_VID_SHIFT); + hi = MSR_C_HI_STP_GNT_BENIGN; + dprintk("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi); + wrmsr(MSR_FIDVID_CTL, lo, hi); +} + + +/* write the new fid value along with the other control fields to the msr */ +static int write_new_fid(struct powernow_k8_data *data, u32 fid) +{ + u32 lo; + u32 savevid = data->currvid; + u32 i = 0; + + if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) { + printk(KERN_ERR PFX "internal error - overflow on fid write\n"); + return 1; + } + + lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID; + + dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n", + fid, lo, data->plllock * PLL_LOCK_CONVERSION); + + do { + wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); + if (i++ > 100) { + printk(KERN_ERR PFX "Hardware error - pending bit very stuck - no further pstate changes possible\n"); + return 1; + } + } while (query_current_values_with_pending_wait(data)); + + count_off_irt(data); + + if (savevid != data->currvid) { + printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n", + savevid, data->currvid); + return 1; + } + + if (fid != data->currfid) { + printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid, + data->currfid); + return 1; + } + + return 0; +} + +/* Write a new vid to the hardware */ +static int write_new_vid(struct powernow_k8_data *data, u32 vid) +{ + u32 lo; + u32 savefid = data->currfid; + int i = 0; + + if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) { + printk(KERN_ERR PFX "internal error - overflow on vid write\n"); + return 1; + } + + lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID; + + dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n", + vid, lo, STOP_GRANT_5NS); + + do { + wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); + if (i++ > 100) { + printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n"); + return 1; + } + } while (query_current_values_with_pending_wait(data)); + + if (savefid != data->currfid) { + printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n", + savefid, data->currfid); + return 1; + } + + if (vid != data->currvid) { + printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid, + data->currvid); + return 1; + } + + return 0; +} + +/* + * Reduce the vid by the max of step or reqvid. + * Decreasing vid codes represent increasing voltages: + * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. + */ +static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step) +{ + if ((data->currvid - reqvid) > step) + reqvid = data->currvid - step; + + if (write_new_vid(data, reqvid)) + return 1; + + count_off_vst(data); + + return 0; +} + +/* Change hardware pstate by single MSR write */ +static int transition_pstate(struct powernow_k8_data *data, u32 pstate) +{ + wrmsr(MSR_PSTATE_CTRL, pstate, 0); + data->currfid = find_fid_from_pstate(pstate); + return 0; +} + +/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ +static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid) +{ + if (core_voltage_pre_transition(data, reqvid)) + return 1; + + if (core_frequency_transition(data, reqfid)) + return 1; + + if (core_voltage_post_transition(data, reqvid)) + return 1; + + if (query_current_values_with_pending_wait(data)) + return 1; + + if ((reqfid != data->currfid) || (reqvid != data->currvid)) { + printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n", + smp_processor_id(), + reqfid, reqvid, data->currfid, data->currvid); + return 1; + } + + dprintk("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n", + smp_processor_id(), data->currfid, data->currvid); + + return 0; +} + +/* Phase 1 - core voltage transition ... setup voltage */ +static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid) +{ + u32 rvosteps = data->rvo; + u32 savefid = data->currfid; + u32 maxvid, lo; + + dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", + smp_processor_id(), + data->currfid, data->currvid, reqvid, data->rvo); + + rdmsr(MSR_FIDVID_STATUS, lo, maxvid); + maxvid = 0x1f & (maxvid >> 16); + dprintk("ph1 maxvid=0x%x\n", maxvid); + if (reqvid < maxvid) /* lower numbers are higher voltages */ + reqvid = maxvid; + + while (data->currvid > reqvid) { + dprintk("ph1: curr 0x%x, req vid 0x%x\n", + data->currvid, reqvid); + if (decrease_vid_code_by_step(data, reqvid, data->vidmvs)) + return 1; + } + + while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { + if (data->currvid == maxvid) { + rvosteps = 0; + } else { + dprintk("ph1: changing vid for rvo, req 0x%x\n", + data->currvid - 1); + if (decrease_vid_code_by_step(data, data->currvid - 1, 1)) + return 1; + rvosteps--; + } + } + + if (query_current_values_with_pending_wait(data)) + return 1; + + if (savefid != data->currfid) { + printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid); + return 1; + } + + dprintk("ph1 complete, currfid 0x%x, currvid 0x%x\n", + data->currfid, data->currvid); + + return 0; +} + +/* Phase 2 - core frequency transition */ +static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) +{ + u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid; + + if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { + printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n", + reqfid, data->currfid); + return 1; + } + + if (data->currfid == reqfid) { + printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid); + return 0; + } + + dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n", + smp_processor_id(), + data->currfid, data->currvid, reqfid); + + vcoreqfid = convert_fid_to_vco_fid(reqfid); + vcocurrfid = convert_fid_to_vco_fid(data->currfid); + vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid + : vcoreqfid - vcocurrfid; + + while (vcofiddiff > 2) { + (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); + + if (reqfid > data->currfid) { + if (data->currfid > LO_FID_TABLE_TOP) { + if (write_new_fid(data, data->currfid + fid_interval)) { + return 1; + } + } else { + if (write_new_fid + (data, 2 + convert_fid_to_vco_fid(data->currfid))) { + return 1; + } + } + } else { + if (write_new_fid(data, data->currfid - fid_interval)) + return 1; + } + + vcocurrfid = convert_fid_to_vco_fid(data->currfid); + vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid + : vcoreqfid - vcocurrfid; + } + + if (write_new_fid(data, reqfid)) + return 1; + + if (query_current_values_with_pending_wait(data)) + return 1; + + if (data->currfid != reqfid) { + printk(KERN_ERR PFX + "ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n", + data->currfid, reqfid); + return 1; + } + + if (savevid != data->currvid) { + printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n", + savevid, data->currvid); + return 1; + } + + dprintk("ph2 complete, currfid 0x%x, currvid 0x%x\n", + data->currfid, data->currvid); + + return 0; +} + +/* Phase 3 - core voltage transition flow ... jump to the final vid. */ +static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid) +{ + u32 savefid = data->currfid; + u32 savereqvid = reqvid; + + dprintk("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n", + smp_processor_id(), + data->currfid, data->currvid); + + if (reqvid != data->currvid) { + if (write_new_vid(data, reqvid)) + return 1; + + if (savefid != data->currfid) { + printk(KERN_ERR PFX + "ph3: bad fid change, save 0x%x, curr 0x%x\n", + savefid, data->currfid); + return 1; + } + + if (data->currvid != reqvid) { + printk(KERN_ERR PFX + "ph3: failed vid transition\n, req 0x%x, curr 0x%x", + reqvid, data->currvid); + return 1; + } + } + + if (query_current_values_with_pending_wait(data)) + return 1; + + if (savereqvid != data->currvid) { + dprintk("ph3 failed, currvid 0x%x\n", data->currvid); + return 1; + } + + if (savefid != data->currfid) { + dprintk("ph3 failed, currfid changed 0x%x\n", + data->currfid); + return 1; + } + + dprintk("ph3 complete, currfid 0x%x, currvid 0x%x\n", + data->currfid, data->currvid); + + return 0; +} + +static int check_supported_cpu(unsigned int cpu) +{ + cpumask_t oldmask = CPU_MASK_ALL; + u32 eax, ebx, ecx, edx; + unsigned int rc = 0; + + oldmask = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + + if (smp_processor_id() != cpu) { + printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu); + goto out; + } + + if (current_cpu_data.x86_vendor != X86_VENDOR_AMD) + goto out; + + eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) && + ((eax & CPUID_XFAM) < CPUID_XFAM_10H)) + goto out; + + if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { + if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || + ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { + printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax); + goto out; + } + + eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES); + if (eax < CPUID_FREQ_VOLT_CAPABILITIES) { + printk(KERN_INFO PFX + "No frequency change capabilities detected\n"); + goto out; + } + + cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); + if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) { + printk(KERN_INFO PFX "Power state transitions not supported\n"); + goto out; + } + } else { /* must be a HW Pstate capable processor */ + cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); + if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE) + cpu_family = CPU_HW_PSTATE; + else + goto out; + } + + rc = 1; + +out: + set_cpus_allowed(current, oldmask); + return rc; +} + +static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) +{ + unsigned int j; + u8 lastfid = 0xff; + + for (j = 0; j < data->numps; j++) { + if (pst[j].vid > LEAST_VID) { + printk(KERN_ERR PFX "vid %d invalid : 0x%x\n", j, pst[j].vid); + return -EINVAL; + } + if (pst[j].vid < data->rvo) { /* vid + rvo >= 0 */ + printk(KERN_ERR BFX "0 vid exceeded with pstate %d\n", j); + return -ENODEV; + } + if (pst[j].vid < maxvid + data->rvo) { /* vid + rvo >= maxvid */ + printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j); + return -ENODEV; + } + if (pst[j].fid > MAX_FID) { + printk(KERN_ERR BFX "maxfid exceeded with pstate %d\n", j); + return -ENODEV; + } + if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) { + /* Only first fid is allowed to be in "low" range */ + printk(KERN_ERR BFX "two low fids - %d : 0x%x\n", j, pst[j].fid); + return -EINVAL; + } + if (pst[j].fid < lastfid) + lastfid = pst[j].fid; + } + if (lastfid & 1) { + printk(KERN_ERR BFX "lastfid invalid\n"); + return -EINVAL; + } + if (lastfid > LO_FID_TABLE_TOP) + printk(KERN_INFO BFX "first fid not from lo freq table\n"); + + return 0; +} + +static void print_basics(struct powernow_k8_data *data) +{ + int j; + for (j = 0; j < data->numps; j++) { + if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) { + if (cpu_family == CPU_HW_PSTATE) { + printk(KERN_INFO PFX " %d : fid 0x%x did 0x%x (%d MHz)\n", + j, + (data->powernow_table[j].index & 0xff00) >> 8, + (data->powernow_table[j].index & 0xff0000) >> 16, + data->powernow_table[j].frequency/1000); + } else { + printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x\n", + j, + data->powernow_table[j].index & 0xff, + data->powernow_table[j].frequency/1000, + data->powernow_table[j].index >> 8); + } + } + } + if (data->batps) + printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps); +} + +static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) +{ + struct cpufreq_frequency_table *powernow_table; + unsigned int j; + + if (data->batps) { /* use ACPI support to get full speed on mains power */ + printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps); + data->numps = data->batps; + } + + for ( j=1; j<data->numps; j++ ) { + if (pst[j-1].fid >= pst[j].fid) { + printk(KERN_ERR PFX "PST out of sequence\n"); + return -EINVAL; + } + } + + if (data->numps < 2) { + printk(KERN_ERR PFX "no p states to transition\n"); + return -ENODEV; + } + + if (check_pst_table(data, pst, maxvid)) + return -EINVAL; + + powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) + * (data->numps + 1)), GFP_KERNEL); + if (!powernow_table) { + printk(KERN_ERR PFX "powernow_table memory alloc failure\n"); + return -ENOMEM; + } + + for (j = 0; j < data->numps; j++) { + powernow_table[j].index = pst[j].fid; /* lower 8 bits */ + powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ + powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid); + } + powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; + powernow_table[data->numps].index = 0; + + if (query_current_values_with_pending_wait(data)) { + kfree(powernow_table); + return -EIO; + } + + dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid); + data->powernow_table = powernow_table; + if (first_cpu(cpu_core_map[data->cpu]) == data->cpu) + print_basics(data); + + for (j = 0; j < data->numps; j++) + if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid)) + return 0; + + dprintk("currfid/vid do not match PST, ignoring\n"); + return 0; +} + +/* Find and validate the PSB/PST table in BIOS. */ +static int find_psb_table(struct powernow_k8_data *data) +{ + struct psb_s *psb; + unsigned int i; + u32 mvs; + u8 maxvid; + u32 cpst = 0; + u32 thiscpuid; + + for (i = 0xc0000; i < 0xffff0; i += 0x10) { + /* Scan BIOS looking for the signature. */ + /* It can not be at ffff0 - it is too big. */ + + psb = phys_to_virt(i); + if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0) + continue; + + dprintk("found PSB header at 0x%p\n", psb); + + dprintk("table vers: 0x%x\n", psb->tableversion); + if (psb->tableversion != PSB_VERSION_1_4) { + printk(KERN_ERR BFX "PSB table is not v1.4\n"); + return -ENODEV; + } + + dprintk("flags: 0x%x\n", psb->flags1); + if (psb->flags1) { + printk(KERN_ERR BFX "unknown flags\n"); + return -ENODEV; + } + + data->vstable = psb->vstable; + dprintk("voltage stabilization time: %d(*20us)\n", data->vstable); + + dprintk("flags2: 0x%x\n", psb->flags2); + data->rvo = psb->flags2 & 3; + data->irt = ((psb->flags2) >> 2) & 3; + mvs = ((psb->flags2) >> 4) & 3; + data->vidmvs = 1 << mvs; + data->batps = ((psb->flags2) >> 6) & 3; + + dprintk("ramp voltage offset: %d\n", data->rvo); + dprintk("isochronous relief time: %d\n", data->irt); + dprintk("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs); + + dprintk("numpst: 0x%x\n", psb->num_tables); + cpst = psb->num_tables; + if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){ + thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) { + cpst = 1; + } + } + if (cpst != 1) { + printk(KERN_ERR BFX "numpst must be 1\n"); + return -ENODEV; + } + + data->plllock = psb->plllocktime; + dprintk("plllocktime: 0x%x (units 1us)\n", psb->plllocktime); + dprintk("maxfid: 0x%x\n", psb->maxfid); + dprintk("maxvid: 0x%x\n", psb->maxvid); + maxvid = psb->maxvid; + + data->numps = psb->numps; + dprintk("numpstates: 0x%x\n", data->numps); + return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid); + } + /* + * If you see this message, complain to BIOS manufacturer. If + * he tells you "we do not support Linux" or some similar + * nonsense, remember that Windows 2000 uses the same legacy + * mechanism that the old Linux PSB driver uses. Tell them it + * is broken with Windows 2000. + * + * The reference to the AMD documentation is chapter 9 in the + * BIOS and Kernel Developer's Guide, which is available on + * www.amd.com + */ + printk(KERN_ERR PFX "BIOS error - no PSB or ACPI _PSS objects\n"); + return -ENODEV; +} + +#ifdef CONFIG_X86_POWERNOW_K8_ACPI +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) +{ + if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) + return; + + data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK; + data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK; + data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; + data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK; + data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK); + data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK; +} + +static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) +{ + struct cpufreq_frequency_table *powernow_table; + int ret_val; + + if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { + dprintk("register performance failed: bad ACPI data\n"); + return -EIO; + } + + /* verify the data contained in the ACPI structures */ + if (data->acpi_data.state_count <= 1) { + dprintk("No ACPI P-States\n"); + goto err_out; + } + + if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || + (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { + dprintk("Invalid control/status registers (%x - %x)\n", + data->acpi_data.control_register.space_id, + data->acpi_data.status_register.space_id); + goto err_out; + } + + /* fill in data->powernow_table */ + powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) + * (data->acpi_data.state_count + 1)), GFP_KERNEL); + if (!powernow_table) { + dprintk("powernow_table memory alloc failure\n"); + goto err_out; + } + + if (cpu_family == CPU_HW_PSTATE) + ret_val = fill_powernow_table_pstate(data, powernow_table); + else + ret_val = fill_powernow_table_fidvid(data, powernow_table); + if (ret_val) + goto err_out_mem; + + powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END; + powernow_table[data->acpi_data.state_count].index = 0; + data->powernow_table = powernow_table; + + /* fill in data */ + data->numps = data->acpi_data.state_count; + if (first_cpu(cpu_core_map[data->cpu]) == data->cpu) + print_basics(data); + powernow_k8_acpi_pst_values(data, 0); + + /* notify BIOS that we exist */ + acpi_processor_notify_smm(THIS_MODULE); + + return 0; + +err_out_mem: + kfree(powernow_table); + +err_out: + acpi_processor_unregister_performance(&data->acpi_data, data->cpu); + + /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */ + data->acpi_data.state_count = 0; + + return -ENODEV; +} + +static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) +{ + int i; + + for (i = 0; i < data->acpi_data.state_count; i++) { + u32 index; + u32 hi = 0, lo = 0; + u32 fid; + u32 did; + + index = data->acpi_data.states[i].control & HW_PSTATE_MASK; + if (index > MAX_HW_PSTATE) { + printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index); + printk(KERN_ERR PFX "Please report to BIOS manufacturer\n"); + } + rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); + if (!(hi & HW_PSTATE_VALID_MASK)) { + dprintk("invalid pstate %d, ignoring\n", index); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; + } + + fid = lo & HW_PSTATE_FID_MASK; + did = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; + + dprintk(" %d : fid 0x%x, did 0x%x\n", index, fid, did); + + powernow_table[i].index = index | (fid << HW_FID_INDEX_SHIFT) | (did << HW_DID_INDEX_SHIFT); + + powernow_table[i].frequency = find_khz_freq_from_fiddid(fid, did); + + if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { + printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n", + powernow_table[i].frequency, + (unsigned int) (data->acpi_data.states[i].core_frequency * 1000)); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; + } + } + return 0; +} + +static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) +{ + int i; + int cntlofreq = 0; + for (i = 0; i < data->acpi_data.state_count; i++) { + u32 fid; + u32 vid; + + if (data->exttype) { + fid = data->acpi_data.states[i].status & EXT_FID_MASK; + vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK; + } else { + fid = data->acpi_data.states[i].control & FID_MASK; + vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK; + } + + dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); + + powernow_table[i].index = fid; /* lower 8 bits */ + powernow_table[i].index |= (vid << 8); /* upper 8 bits */ + powernow_table[i].frequency = find_khz_freq_from_fid(fid); + + /* verify frequency is OK */ + if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) || + (powernow_table[i].frequency < (MIN_FREQ * 1000))) { + dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; + } + + /* verify voltage is OK - BIOSs are using "off" to indicate invalid */ + if (vid == VID_OFF) { + dprintk("invalid vid %u, ignoring\n", vid); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; + } + + /* verify only 1 entry from the lo frequency table */ + if (fid < HI_FID_TABLE_BOTTOM) { + if (cntlofreq) { + /* if both entries are the same, ignore this one ... */ + if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || + (powernow_table[i].index != powernow_table[cntlofreq].index)) { + printk(KERN_ERR PFX "Too many lo freq table entries\n"); + return 1; + } + + dprintk("double low frequency table entry, ignoring it.\n"); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; + } else + cntlofreq = i; + } + + if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { + printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n", + powernow_table[i].frequency, + (unsigned int) (data->acpi_data.states[i].core_frequency * 1000)); + powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + continue; + } + } + return 0; +} + +static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) +{ + if (data->acpi_data.state_count) + acpi_processor_unregister_performance(&data->acpi_data, data->cpu); +} + +#else +static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; } +static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; } +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; } +#endif /* CONFIG_X86_POWERNOW_K8_ACPI */ + +/* Take a frequency, and issue the fid/vid transition command */ +static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index) +{ + u32 fid = 0; + u32 vid = 0; + int res, i; + struct cpufreq_freqs freqs; + + dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); + + /* fid/vid correctness check for k8 */ + /* fid are the lower 8 bits of the index we stored into + * the cpufreq frequency table in find_psb_table, vid + * are the upper 8 bits. + */ + fid = data->powernow_table[index].index & 0xFF; + vid = (data->powernow_table[index].index & 0xFF00) >> 8; + + dprintk("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); + + if (query_current_values_with_pending_wait(data)) + return 1; + + if ((data->currvid == vid) && (data->currfid == fid)) { + dprintk("target matches current values (fid 0x%x, vid 0x%x)\n", + fid, vid); + return 0; + } + + if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { + printk(KERN_ERR PFX + "ignoring illegal change in lo freq table-%x to 0x%x\n", + data->currfid, fid); + return 1; + } + + dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n", + smp_processor_id(), fid, vid); + freqs.old = find_khz_freq_from_fid(data->currfid); + freqs.new = find_khz_freq_from_fid(fid); + + for_each_cpu_mask(i, *(data->available_cores)) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } + + res = transition_fid_vid(data, fid, vid); + freqs.new = find_khz_freq_from_fid(data->currfid); + + for_each_cpu_mask(i, *(data->available_cores)) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + return res; +} + +/* Take a frequency, and issue the hardware pstate transition command */ +static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index) +{ + u32 fid = 0; + u32 did = 0; + u32 pstate = 0; + int res, i; + struct cpufreq_freqs freqs; + + dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); + + /* get fid did for hardware pstate transition */ + pstate = index & HW_PSTATE_MASK; + if (pstate > MAX_HW_PSTATE) + return 0; + fid = (index & HW_FID_INDEX_MASK) >> HW_FID_INDEX_SHIFT; + did = (index & HW_DID_INDEX_MASK) >> HW_DID_INDEX_SHIFT; + freqs.old = find_khz_freq_from_fiddid(data->currfid, data->currdid); + freqs.new = find_khz_freq_from_fiddid(fid, did); + + for_each_cpu_mask(i, *(data->available_cores)) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } + + res = transition_pstate(data, pstate); + data->currfid = find_fid_from_pstate(pstate); + data->currdid = find_did_from_pstate(pstate); + freqs.new = find_khz_freq_from_fiddid(data->currfid, data->currdid); + + for_each_cpu_mask(i, *(data->available_cores)) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + return res; +} + +/* Driver entry point to switch to the target frequency */ +static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation) +{ + cpumask_t oldmask = CPU_MASK_ALL; + struct powernow_k8_data *data = powernow_data[pol->cpu]; + u32 checkfid; + u32 checkvid; + unsigned int newstate; + int ret = -EIO; + + if (!data) + return -EINVAL; + + checkfid = data->currfid; + checkvid = data->currvid; + + /* only run on specific CPU from here on */ + oldmask = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); + + if (smp_processor_id() != pol->cpu) { + printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); + goto err_out; + } + + if (pending_bit_stuck()) { + printk(KERN_ERR PFX "failing targ, change pending bit set\n"); + goto err_out; + } + + dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n", + pol->cpu, targfreq, pol->min, pol->max, relation); + + if (query_current_values_with_pending_wait(data)) + goto err_out; + + if (cpu_family == CPU_HW_PSTATE) + dprintk("targ: curr fid 0x%x, did 0x%x\n", + data->currfid, data->currdid); + else { + dprintk("targ: curr fid 0x%x, vid 0x%x\n", + data->currfid, data->currvid); + + if ((checkvid != data->currvid) || (checkfid != data->currfid)) { + printk(KERN_INFO PFX + "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", + checkfid, data->currfid, checkvid, data->currvid); + } + } + + if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) + goto err_out; + + mutex_lock(&fidvid_mutex); + + powernow_k8_acpi_pst_values(data, newstate); + + if (cpu_family == CPU_HW_PSTATE) + ret = transition_frequency_pstate(data, newstate); + else + ret = transition_frequency_fidvid(data, newstate); + if (ret) { + printk(KERN_ERR PFX "transition frequency failed\n"); + ret = 1; + mutex_unlock(&fidvid_mutex); + goto err_out; + } + mutex_unlock(&fidvid_mutex); + + if (cpu_family == CPU_HW_PSTATE) + pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid); + else + pol->cur = find_khz_freq_from_fid(data->currfid); + ret = 0; + +err_out: + set_cpus_allowed(current, oldmask); + return ret; +} + +/* Driver entry point to verify the policy and range of frequencies */ +static int powernowk8_verify(struct cpufreq_policy *pol) +{ + struct powernow_k8_data *data = powernow_data[pol->cpu]; + + if (!data) + return -EINVAL; + + return cpufreq_frequency_table_verify(pol, data->powernow_table); +} + +/* per CPU init entry point to the driver */ +static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) +{ + struct powernow_k8_data *data; + cpumask_t oldmask = CPU_MASK_ALL; + int rc; + + if (!cpu_online(pol->cpu)) + return -ENODEV; + + if (!check_supported_cpu(pol->cpu)) + return -ENODEV; + + data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); + if (!data) { + printk(KERN_ERR PFX "unable to alloc powernow_k8_data"); + return -ENOMEM; + } + + data->cpu = pol->cpu; + + if (powernow_k8_cpu_init_acpi(data)) { + /* + * Use the PSB BIOS structure. This is only availabe on + * an UP version, and is deprecated by AMD. + */ + if (num_online_cpus() != 1) { + printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n"); + kfree(data); + return -ENODEV; + } + if (pol->cpu != 0) { + printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n"); + kfree(data); + return -ENODEV; + } + rc = find_psb_table(data); + if (rc) { + kfree(data); + return -ENODEV; + } + } + + /* only run on specific CPU from here on */ + oldmask = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); + + if (smp_processor_id() != pol->cpu) { + printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); + goto err_out; + } + + if (pending_bit_stuck()) { + printk(KERN_ERR PFX "failing init, change pending bit set\n"); + goto err_out; + } + + if (query_current_values_with_pending_wait(data)) + goto err_out; + + if (cpu_family == CPU_OPTERON) + fidvid_msr_init(); + + /* run on any CPU again */ + set_cpus_allowed(current, oldmask); + + pol->governor = CPUFREQ_DEFAULT_GOVERNOR; + if (cpu_family == CPU_HW_PSTATE) + pol->cpus = cpumask_of_cpu(pol->cpu); + else + pol->cpus = cpu_core_map[pol->cpu]; + data->available_cores = &(pol->cpus); + + /* Take a crude guess here. + * That guess was in microseconds, so multiply with 1000 */ + pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US) + + (3 * (1 << data->irt) * 10)) * 1000; + + if (cpu_family == CPU_HW_PSTATE) + pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid); + else + pol->cur = find_khz_freq_from_fid(data->currfid); + dprintk("policy current frequency %d kHz\n", pol->cur); + + /* min/max the cpu is capable of */ + if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) { + printk(KERN_ERR PFX "invalid powernow_table\n"); + powernow_k8_cpu_exit_acpi(data); + kfree(data->powernow_table); + kfree(data); + return -EINVAL; + } + + cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); + + if (cpu_family == CPU_HW_PSTATE) + dprintk("cpu_init done, current fid 0x%x, did 0x%x\n", + data->currfid, data->currdid); + else + dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n", + data->currfid, data->currvid); + + powernow_data[pol->cpu] = data; + + return 0; + +err_out: + set_cpus_allowed(current, oldmask); + powernow_k8_cpu_exit_acpi(data); + + kfree(data); + return -ENODEV; +} + +static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol) +{ + struct powernow_k8_data *data = powernow_data[pol->cpu]; + + if (!data) + return -EINVAL; + + powernow_k8_cpu_exit_acpi(data); + + cpufreq_frequency_table_put_attr(pol->cpu); + + kfree(data->powernow_table); + kfree(data); + + return 0; +} + +static unsigned int powernowk8_get (unsigned int cpu) +{ + struct powernow_k8_data *data; + cpumask_t oldmask = current->cpus_allowed; + unsigned int khz = 0; + + data = powernow_data[first_cpu(cpu_core_map[cpu])]; + + if (!data) + return -EINVAL; + + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + if (smp_processor_id() != cpu) { + printk(KERN_ERR PFX "limiting to CPU %d failed in powernowk8_get\n", cpu); + set_cpus_allowed(current, oldmask); + return 0; + } + + if (query_current_values_with_pending_wait(data)) + goto out; + + if (cpu_family == CPU_HW_PSTATE) + khz = find_khz_freq_from_fiddid(data->currfid, data->currdid); + else + khz = find_khz_freq_from_fid(data->currfid); + + +out: + set_cpus_allowed(current, oldmask); + return khz; +} + +static struct freq_attr* powernow_k8_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver cpufreq_amd64_driver = { + .verify = powernowk8_verify, + .target = powernowk8_target, + .init = powernowk8_cpu_init, + .exit = __devexit_p(powernowk8_cpu_exit), + .get = powernowk8_get, + .name = "powernow-k8", + .owner = THIS_MODULE, + .attr = powernow_k8_attr, +}; + +/* driver entry point for init */ +static int __cpuinit powernowk8_init(void) +{ + unsigned int i, supported_cpus = 0; + unsigned int booted_cores = 1; + + for_each_online_cpu(i) { + if (check_supported_cpu(i)) + supported_cpus++; + } + +#ifdef CONFIG_SMP + booted_cores = cpu_data[0].booted_cores; +#endif + + if (supported_cpus == num_online_cpus()) { + printk(KERN_INFO PFX "Found %d %s " + "processors (%d cpu cores) (" VERSION ")\n", + supported_cpus/booted_cores, + boot_cpu_data.x86_model_id, supported_cpus); + return cpufreq_register_driver(&cpufreq_amd64_driver); + } + + return -ENODEV; +} + +/* driver entry point for term */ +static void __exit powernowk8_exit(void) +{ + dprintk("exit\n"); + + cpufreq_unregister_driver(&cpufreq_amd64_driver); +} + +MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>"); +MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); +MODULE_LICENSE("GPL"); + +late_initcall(powernowk8_init); +module_exit(powernowk8_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h new file mode 100644 index 000000000000..b06c812208ca --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -0,0 +1,232 @@ +/* + * (c) 2003-2006 Advanced Micro Devices, Inc. + * Your use of this code is subject to the terms and conditions of the + * GNU general public license version 2. See "COPYING" or + * http://www.gnu.org/licenses/gpl.html + */ + +struct powernow_k8_data { + unsigned int cpu; + + u32 numps; /* number of p-states */ + u32 batps; /* number of p-states supported on battery */ + + /* these values are constant when the PSB is used to determine + * vid/fid pairings, but are modified during the ->target() call + * when ACPI is used */ + u32 rvo; /* ramp voltage offset */ + u32 irt; /* isochronous relief time */ + u32 vidmvs; /* usable value calculated from mvs */ + u32 vstable; /* voltage stabilization time, units 20 us */ + u32 plllock; /* pll lock time, units 1 us */ + u32 exttype; /* extended interface = 1 */ + + /* keep track of the current fid / vid or did */ + u32 currvid, currfid, currdid; + + /* the powernow_table includes all frequency and vid/fid pairings: + * fid are the lower 8 bits of the index, vid are the upper 8 bits. + * frequency is in kHz */ + struct cpufreq_frequency_table *powernow_table; + +#ifdef CONFIG_X86_POWERNOW_K8_ACPI + /* the acpi table needs to be kept. it's only available if ACPI was + * used to determine valid frequency/vid/fid states */ + struct acpi_processor_performance acpi_data; +#endif + /* we need to keep track of associated cores, but let cpufreq + * handle hotplug events - so just point at cpufreq pol->cpus + * structure */ + cpumask_t *available_cores; +}; + + +/* processor's cpuid instruction support */ +#define CPUID_PROCESSOR_SIGNATURE 1 /* function 1 */ +#define CPUID_XFAM 0x0ff00000 /* extended family */ +#define CPUID_XFAM_K8 0 +#define CPUID_XMOD 0x000f0000 /* extended model */ +#define CPUID_XMOD_REV_MASK 0x00080000 +#define CPUID_XFAM_10H 0x00100000 /* family 0x10 */ +#define CPUID_USE_XFAM_XMOD 0x00000f00 +#define CPUID_GET_MAX_CAPABILITIES 0x80000000 +#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007 +#define P_STATE_TRANSITION_CAPABLE 6 + +/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For */ +/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and */ +/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */ +/* the register number is placed in ecx, and the data is returned in edx:eax. */ + +#define MSR_FIDVID_CTL 0xc0010041 +#define MSR_FIDVID_STATUS 0xc0010042 + +/* Field definitions within the FID VID Low Control MSR : */ +#define MSR_C_LO_INIT_FID_VID 0x00010000 +#define MSR_C_LO_NEW_VID 0x00003f00 +#define MSR_C_LO_NEW_FID 0x0000003f +#define MSR_C_LO_VID_SHIFT 8 + +/* Field definitions within the FID VID High Control MSR : */ +#define MSR_C_HI_STP_GNT_TO 0x000fffff + +/* Field definitions within the FID VID Low Status MSR : */ +#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ +#define MSR_S_LO_MAX_RAMP_VID 0x3f000000 +#define MSR_S_LO_MAX_FID 0x003f0000 +#define MSR_S_LO_START_FID 0x00003f00 +#define MSR_S_LO_CURRENT_FID 0x0000003f + +/* Field definitions within the FID VID High Status MSR : */ +#define MSR_S_HI_MIN_WORKING_VID 0x3f000000 +#define MSR_S_HI_MAX_WORKING_VID 0x003f0000 +#define MSR_S_HI_START_VID 0x00003f00 +#define MSR_S_HI_CURRENT_VID 0x0000003f +#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 + + +/* Hardware Pstate _PSS and MSR definitions */ +#define USE_HW_PSTATE 0x00000080 +#define HW_PSTATE_FID_MASK 0x0000003f +#define HW_PSTATE_DID_MASK 0x000001c0 +#define HW_PSTATE_DID_SHIFT 6 +#define HW_PSTATE_MASK 0x00000007 +#define HW_PSTATE_VALID_MASK 0x80000000 +#define HW_FID_INDEX_SHIFT 8 +#define HW_FID_INDEX_MASK 0x0000ff00 +#define HW_DID_INDEX_SHIFT 16 +#define HW_DID_INDEX_MASK 0x00ff0000 +#define HW_WATTS_MASK 0xff +#define HW_PWR_DVR_MASK 0x300 +#define HW_PWR_DVR_SHIFT 8 +#define HW_PWR_MAX_MULT 3 +#define MAX_HW_PSTATE 8 /* hw pstate supports up to 8 */ +#define MSR_PSTATE_DEF_BASE 0xc0010064 /* base of Pstate MSRs */ +#define MSR_PSTATE_STATUS 0xc0010063 /* Pstate Status MSR */ +#define MSR_PSTATE_CTRL 0xc0010062 /* Pstate control MSR */ + +/* define the two driver architectures */ +#define CPU_OPTERON 0 +#define CPU_HW_PSTATE 1 + + +/* + * There are restrictions frequencies have to follow: + * - only 1 entry in the low fid table ( <=1.4GHz ) + * - lowest entry in the high fid table must be >= 2 * the entry in the + * low fid table + * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry + * in the low fid table + * - the parts can only step at <= 200 MHz intervals, odd fid values are + * supported in revision G and later revisions. + * - lowest frequency must be >= interprocessor hypertransport link speed + * (only applies to MP systems obviously) + */ + +/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */ +#define LO_FID_TABLE_TOP 7 /* fid values marking the boundary */ +#define HI_FID_TABLE_BOTTOM 8 /* between the low and high tables */ + +#define LO_VCOFREQ_TABLE_TOP 1400 /* corresponding vco frequency values */ +#define HI_VCOFREQ_TABLE_BOTTOM 1600 + +#define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */ + +#define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */ +#define LEAST_VID 0x3e /* Lowest (numerically highest) useful vid value */ + +#define MIN_FREQ 800 /* Min and max freqs, per spec */ +#define MAX_FREQ 5000 + +#define INVALID_FID_MASK 0xffffffc0 /* not a valid fid if these bits are set */ +#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */ + +#define VID_OFF 0x3f + +#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */ + +#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */ + +#define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */ +#define VST_UNITS_20US 20 /* Voltage Stabalization Time is in units of 20us */ + +/* + * Most values of interest are enocoded in a single field of the _PSS + * entries: the "control" value. + */ + +#define IRT_SHIFT 30 +#define RVO_SHIFT 28 +#define EXT_TYPE_SHIFT 27 +#define PLL_L_SHIFT 20 +#define MVS_SHIFT 18 +#define VST_SHIFT 11 +#define VID_SHIFT 6 +#define IRT_MASK 3 +#define RVO_MASK 3 +#define EXT_TYPE_MASK 1 +#define PLL_L_MASK 0x7f +#define MVS_MASK 3 +#define VST_MASK 0x7f +#define VID_MASK 0x1f +#define FID_MASK 0x1f +#define EXT_VID_MASK 0x3f +#define EXT_FID_MASK 0x3f + + +/* + * Version 1.4 of the PSB table. This table is constructed by BIOS and is + * to tell the OS's power management driver which VIDs and FIDs are + * supported by this particular processor. + * If the data in the PSB / PST is wrong, then this driver will program the + * wrong values into hardware, which is very likely to lead to a crash. + */ + +#define PSB_ID_STRING "AMDK7PNOW!" +#define PSB_ID_STRING_LEN 10 + +#define PSB_VERSION_1_4 0x14 + +struct psb_s { + u8 signature[10]; + u8 tableversion; + u8 flags1; + u16 vstable; + u8 flags2; + u8 num_tables; + u32 cpuid; + u8 plllocktime; + u8 maxfid; + u8 maxvid; + u8 numps; +}; + +/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */ +struct pst_s { + u8 fid; + u8 vid; +}; + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg) + +static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid); +static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid); +static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); + +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); + +#ifdef CONFIG_X86_POWERNOW_K8_ACPI +static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); +static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); +#endif + +#ifdef CONFIG_SMP +static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) +{ +} +#else +static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) +{ + cpu_set(0, cpu_sharedcore_mask[0]); +} +#endif diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c new file mode 100644 index 000000000000..b8fb4b521c62 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c @@ -0,0 +1,191 @@ +/* + * sc520_freq.c: cpufreq driver for the AMD Elan sc520 + * + * Copyright (C) 2005 Sean Young <sean@mess.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based on elanfreq.c + * + * 2005-03-30: - initial revision + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/delay.h> +#include <linux/cpufreq.h> + +#include <asm/msr.h> +#include <asm/timex.h> +#include <asm/io.h> + +#define MMCR_BASE 0xfffef000 /* The default base address */ +#define OFFS_CPUCTL 0x2 /* CPU Control Register */ + +static __u8 __iomem *cpuctl; + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg) + +static struct cpufreq_frequency_table sc520_freq_table[] = { + {0x01, 100000}, + {0x02, 133000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg = *cpuctl; + + switch (clockspeed_reg & 0x03) { + default: + printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg); + case 0x01: + return 100000; + case 0x02: + return 133000; + } +} + +static void sc520_freq_set_cpu_state (unsigned int state) +{ + + struct cpufreq_freqs freqs; + u8 clockspeed_reg; + + freqs.old = sc520_freq_get_cpu_frequency(0); + freqs.new = sc520_freq_table[state].frequency; + freqs.cpu = 0; /* AMD Elan is UP */ + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + dprintk("attempting to set frequency to %i kHz\n", + sc520_freq_table[state].frequency); + + local_irq_disable(); + + clockspeed_reg = *cpuctl & ~0x03; + *cpuctl = clockspeed_reg | sc520_freq_table[state].index; + + local_irq_enable(); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +}; + +static int sc520_freq_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); +} + +static int sc520_freq_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate)) + return -EINVAL; + + sc520_freq_set_cpu_state(newstate); + + return 0; +} + + +/* + * Module init and exit code + */ + +static int sc520_freq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = cpu_data; + int result; + + /* capability check */ + if (c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) + return -ENODEV; + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 1000000; /* 1ms */ + policy->cur = sc520_freq_get_cpu_frequency(0); + + result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); + + return 0; +} + + +static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + + +static struct freq_attr* sc520_freq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + + +static struct cpufreq_driver sc520_freq_driver = { + .get = sc520_freq_get_cpu_frequency, + .verify = sc520_freq_verify, + .target = sc520_freq_target, + .init = sc520_freq_cpu_init, + .exit = sc520_freq_cpu_exit, + .name = "sc520_freq", + .owner = THIS_MODULE, + .attr = sc520_freq_attr, +}; + + +static int __init sc520_freq_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + int err; + + /* Test if we have the right hardware */ + if(c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) { + dprintk("no Elan SC520 processor found!\n"); + return -ENODEV; + } + cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); + if(!cpuctl) { + printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); + return -ENOMEM; + } + + err = cpufreq_register_driver(&sc520_freq_driver); + if (err) + iounmap(cpuctl); + + return err; +} + + +static void __exit sc520_freq_exit(void) +{ + cpufreq_unregister_driver(&sc520_freq_driver); + iounmap(cpuctl); +} + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sean Young <sean@mess.org>"); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); + +module_init(sc520_freq_init); +module_exit(sc520_freq_exit); + diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c new file mode 100644 index 000000000000..6c5dc2c85aeb --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c @@ -0,0 +1,634 @@ +/* + * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium + * M (part of the Centrino chipset). + * + * Since the original Pentium M, most new Intel CPUs support Enhanced + * SpeedStep. + * + * Despite the "SpeedStep" in the name, this is almost entirely unlike + * traditional SpeedStep. + * + * Modelled on speedstep.c + * + * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/sched.h> /* current */ +#include <linux/delay.h> +#include <linux/compiler.h> + +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpufeature.h> + +#define PFX "speedstep-centrino: " +#define MAINTAINER "cpufreq@lists.linux.org.uk" + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) + +#define INTEL_MSR_RANGE (0xffff) + +struct cpu_id +{ + __u8 x86; /* CPU family */ + __u8 x86_model; /* model */ + __u8 x86_mask; /* stepping */ +}; + +enum { + CPU_BANIAS, + CPU_DOTHAN_A1, + CPU_DOTHAN_A2, + CPU_DOTHAN_B0, + CPU_MP4HT_D0, + CPU_MP4HT_E0, +}; + +static const struct cpu_id cpu_ids[] = { + [CPU_BANIAS] = { 6, 9, 5 }, + [CPU_DOTHAN_A1] = { 6, 13, 1 }, + [CPU_DOTHAN_A2] = { 6, 13, 2 }, + [CPU_DOTHAN_B0] = { 6, 13, 6 }, + [CPU_MP4HT_D0] = {15, 3, 4 }, + [CPU_MP4HT_E0] = {15, 4, 1 }, +}; +#define N_IDS ARRAY_SIZE(cpu_ids) + +struct cpu_model +{ + const struct cpu_id *cpu_id; + const char *model_name; + unsigned max_freq; /* max clock in kHz */ + + struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */ +}; +static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x); + +/* Operating points for current CPU */ +static struct cpu_model *centrino_model[NR_CPUS]; +static const struct cpu_id *centrino_cpu[NR_CPUS]; + +static struct cpufreq_driver centrino_driver; + +#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE + +/* Computes the correct form for IA32_PERF_CTL MSR for a particular + frequency/voltage operating point; frequency in MHz, volts in mV. + This is stored as "index" in the structure. */ +#define OP(mhz, mv) \ + { \ + .frequency = (mhz) * 1000, \ + .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \ + } + +/* + * These voltage tables were derived from the Intel Pentium M + * datasheet, document 25261202.pdf, Table 5. I have verified they + * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium + * M. + */ + +/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */ +static struct cpufreq_frequency_table banias_900[] = +{ + OP(600, 844), + OP(800, 988), + OP(900, 1004), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */ +static struct cpufreq_frequency_table banias_1000[] = +{ + OP(600, 844), + OP(800, 972), + OP(900, 988), + OP(1000, 1004), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */ +static struct cpufreq_frequency_table banias_1100[] = +{ + OP( 600, 956), + OP( 800, 1020), + OP( 900, 1100), + OP(1000, 1164), + OP(1100, 1180), + { .frequency = CPUFREQ_TABLE_END } +}; + + +/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */ +static struct cpufreq_frequency_table banias_1200[] = +{ + OP( 600, 956), + OP( 800, 1004), + OP( 900, 1020), + OP(1000, 1100), + OP(1100, 1164), + OP(1200, 1180), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.30GHz (Banias) */ +static struct cpufreq_frequency_table banias_1300[] = +{ + OP( 600, 956), + OP( 800, 1260), + OP(1000, 1292), + OP(1200, 1356), + OP(1300, 1388), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.40GHz (Banias) */ +static struct cpufreq_frequency_table banias_1400[] = +{ + OP( 600, 956), + OP( 800, 1180), + OP(1000, 1308), + OP(1200, 1436), + OP(1400, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.50GHz (Banias) */ +static struct cpufreq_frequency_table banias_1500[] = +{ + OP( 600, 956), + OP( 800, 1116), + OP(1000, 1228), + OP(1200, 1356), + OP(1400, 1452), + OP(1500, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.60GHz (Banias) */ +static struct cpufreq_frequency_table banias_1600[] = +{ + OP( 600, 956), + OP( 800, 1036), + OP(1000, 1164), + OP(1200, 1276), + OP(1400, 1420), + OP(1600, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; + +/* Intel Pentium M processor 1.70GHz (Banias) */ +static struct cpufreq_frequency_table banias_1700[] = +{ + OP( 600, 956), + OP( 800, 1004), + OP(1000, 1116), + OP(1200, 1228), + OP(1400, 1308), + OP(1700, 1484), + { .frequency = CPUFREQ_TABLE_END } +}; +#undef OP + +#define _BANIAS(cpuid, max, name) \ +{ .cpu_id = cpuid, \ + .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \ + .max_freq = (max)*1000, \ + .op_points = banias_##max, \ +} +#define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max) + +/* CPU models, their operating frequency range, and freq/voltage + operating points */ +static struct cpu_model models[] = +{ + _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"), + BANIAS(1000), + BANIAS(1100), + BANIAS(1200), + BANIAS(1300), + BANIAS(1400), + BANIAS(1500), + BANIAS(1600), + BANIAS(1700), + + /* NULL model_name is a wildcard */ + { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, + { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, + { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, + { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, + + { NULL, } +}; +#undef _BANIAS +#undef BANIAS + +static int centrino_cpu_init_table(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu]; + struct cpu_model *model; + + for(model = models; model->cpu_id != NULL; model++) + if (centrino_verify_cpu_id(cpu, model->cpu_id) && + (model->model_name == NULL || + strcmp(cpu->x86_model_id, model->model_name) == 0)) + break; + + if (model->cpu_id == NULL) { + /* No match at all */ + dprintk("no support for CPU model \"%s\": " + "send /proc/cpuinfo to " MAINTAINER "\n", + cpu->x86_model_id); + return -ENOENT; + } + + if (model->op_points == NULL) { + /* Matched a non-match */ + dprintk("no table support for CPU model \"%s\"\n", + cpu->x86_model_id); + dprintk("try using the acpi-cpufreq driver\n"); + return -ENOENT; + } + + centrino_model[policy->cpu] = model; + + dprintk("found \"%s\": max frequency: %dkHz\n", + model->model_name, model->max_freq); + + return 0; +} + +#else +static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; } +#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */ + +static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x) +{ + if ((c->x86 == x->x86) && + (c->x86_model == x->x86_model) && + (c->x86_mask == x->x86_mask)) + return 1; + return 0; +} + +/* To be called only after centrino_model is initialized */ +static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) +{ + int i; + + /* + * Extract clock in kHz from PERF_CTL value + * for centrino, as some DSDTs are buggy. + * Ideally, this can be done using the acpi_data structure. + */ + if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) || + (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) || + (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) { + msr = (msr >> 8) & 0xff; + return msr * 100000; + } + + if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points)) + return 0; + + msr &= 0xffff; + for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { + if (msr == centrino_model[cpu]->op_points[i].index) + return centrino_model[cpu]->op_points[i].frequency; + } + if (failsafe) + return centrino_model[cpu]->op_points[i-1].frequency; + else + return 0; +} + +/* Return the current CPU frequency in kHz */ +static unsigned int get_cur_freq(unsigned int cpu) +{ + unsigned l, h; + unsigned clock_freq; + cpumask_t saved_mask; + + saved_mask = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + if (smp_processor_id() != cpu) + return 0; + + rdmsr(MSR_IA32_PERF_STATUS, l, h); + clock_freq = extract_clock(l, cpu, 0); + + if (unlikely(clock_freq == 0)) { + /* + * On some CPUs, we can see transient MSR values (which are + * not present in _PSS), while CPU is doing some automatic + * P-state transition (like TM2). Get the last freq set + * in PERF_CTL. + */ + rdmsr(MSR_IA32_PERF_CTL, l, h); + clock_freq = extract_clock(l, cpu, 1); + } + + set_cpus_allowed(current, saved_mask); + return clock_freq; +} + + +static int centrino_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu]; + unsigned freq; + unsigned l, h; + int ret; + int i; + + /* Only Intel makes Enhanced Speedstep-capable CPUs */ + if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST)) + return -ENODEV; + + if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) + centrino_driver.flags |= CPUFREQ_CONST_LOOPS; + + if (policy->cpu != 0) + return -ENODEV; + + for (i = 0; i < N_IDS; i++) + if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) + break; + + if (i != N_IDS) + centrino_cpu[policy->cpu] = &cpu_ids[i]; + + if (!centrino_cpu[policy->cpu]) { + dprintk("found unsupported CPU with " + "Enhanced SpeedStep: send /proc/cpuinfo to " + MAINTAINER "\n"); + return -ENODEV; + } + + if (centrino_cpu_init_table(policy)) { + return -ENODEV; + } + + /* Check to see if Enhanced SpeedStep is enabled, and try to + enable it if not. */ + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + + if (!(l & (1<<16))) { + l |= (1<<16); + dprintk("trying to enable Enhanced SpeedStep (%x)\n", l); + wrmsr(MSR_IA32_MISC_ENABLE, l, h); + + /* check to see if it stuck */ + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + if (!(l & (1<<16))) { + printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n"); + return -ENODEV; + } + } + + freq = get_cur_freq(policy->cpu); + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */ + policy->cur = freq; + + dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur); + + ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points); + if (ret) + return (ret); + + cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu); + + return 0; +} + +static int centrino_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + + if (!centrino_model[cpu]) + return -ENODEV; + + cpufreq_frequency_table_put_attr(cpu); + + centrino_model[cpu] = NULL; + + return 0; +} + +/** + * centrino_verify - verifies a new CPUFreq policy + * @policy: new policy + * + * Limit must be within this model's frequency range at least one + * border included. + */ +static int centrino_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points); +} + +/** + * centrino_setpolicy - set a new CPUFreq policy + * @policy: new policy + * @target_freq: the target frequency + * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * + * Sets a new CPUFreq policy. + */ +static int centrino_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; + struct cpufreq_freqs freqs; + cpumask_t online_policy_cpus; + cpumask_t saved_mask; + cpumask_t set_mask; + cpumask_t covered_cpus; + int retval = 0; + unsigned int j, k, first_cpu, tmp; + + if (unlikely(centrino_model[cpu] == NULL)) + return -ENODEV; + + if (unlikely(cpufreq_frequency_table_target(policy, + centrino_model[cpu]->op_points, + target_freq, + relation, + &newstate))) { + return -EINVAL; + } + +#ifdef CONFIG_HOTPLUG_CPU + /* cpufreq holds the hotplug lock, so we are safe from here on */ + cpus_and(online_policy_cpus, cpu_online_map, policy->cpus); +#else + online_policy_cpus = policy->cpus; +#endif + + saved_mask = current->cpus_allowed; + first_cpu = 1; + cpus_clear(covered_cpus); + for_each_cpu_mask(j, online_policy_cpus) { + /* + * Support for SMP systems. + * Make sure we are running on CPU that wants to change freq + */ + cpus_clear(set_mask); + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) + cpus_or(set_mask, set_mask, online_policy_cpus); + else + cpu_set(j, set_mask); + + set_cpus_allowed(current, set_mask); + preempt_disable(); + if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) { + dprintk("couldn't limit to CPUs in this domain\n"); + retval = -EAGAIN; + if (first_cpu) { + /* We haven't started the transition yet. */ + goto migrate_end; + } + preempt_enable(); + break; + } + + msr = centrino_model[cpu]->op_points[newstate].index; + + if (first_cpu) { + rdmsr(MSR_IA32_PERF_CTL, oldmsr, h); + if (msr == (oldmsr & 0xffff)) { + dprintk("no change needed - msr was and needs " + "to be %x\n", oldmsr); + retval = 0; + goto migrate_end; + } + + freqs.old = extract_clock(oldmsr, cpu, 0); + freqs.new = extract_clock(msr, cpu, 0); + + dprintk("target=%dkHz old=%d new=%d msr=%04x\n", + target_freq, freqs.old, freqs.new, msr); + + for_each_cpu_mask(k, online_policy_cpus) { + freqs.cpu = k; + cpufreq_notify_transition(&freqs, + CPUFREQ_PRECHANGE); + } + + first_cpu = 0; + /* all but 16 LSB are reserved, treat them with care */ + oldmsr &= ~0xffff; + msr &= 0xffff; + oldmsr |= msr; + } + + wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); + if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { + preempt_enable(); + break; + } + + cpu_set(j, covered_cpus); + preempt_enable(); + } + + for_each_cpu_mask(k, online_policy_cpus) { + freqs.cpu = k; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + + if (unlikely(retval)) { + /* + * We have failed halfway through the frequency change. + * We have sent callbacks to policy->cpus and + * MSRs have already been written on coverd_cpus. + * Best effort undo.. + */ + + if (!cpus_empty(covered_cpus)) { + for_each_cpu_mask(j, covered_cpus) { + set_cpus_allowed(current, cpumask_of_cpu(j)); + wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); + } + } + + tmp = freqs.new; + freqs.new = freqs.old; + freqs.old = tmp; + for_each_cpu_mask(j, online_policy_cpus) { + freqs.cpu = j; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + } + set_cpus_allowed(current, saved_mask); + return 0; + +migrate_end: + preempt_enable(); + set_cpus_allowed(current, saved_mask); + return 0; +} + +static struct freq_attr* centrino_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver centrino_driver = { + .name = "centrino", /* should be speedstep-centrino, + but there's a 16 char limit */ + .init = centrino_cpu_init, + .exit = centrino_cpu_exit, + .verify = centrino_verify, + .target = centrino_target, + .get = get_cur_freq, + .attr = centrino_attr, + .owner = THIS_MODULE, +}; + + +/** + * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver + * + * Initializes the Enhanced SpeedStep support. Returns -ENODEV on + * unsupported devices, -ENOENT if there's no voltage table for this + * particular CPU model, -EINVAL on problems during initiatization, + * and zero on success. + * + * This is quite picky. Not only does the CPU have to advertise the + * "est" flag in the cpuid capability flags, we look for a specific + * CPU model and stepping, and we need to have the exact model name in + * our voltage tables. That is, be paranoid about not releasing + * someone's valuable magic smoke. + */ +static int __init centrino_init(void) +{ + struct cpuinfo_x86 *cpu = cpu_data; + + if (!cpu_has(cpu, X86_FEATURE_EST)) + return -ENODEV; + + return cpufreq_register_driver(¢rino_driver); +} + +static void __exit centrino_exit(void) +{ + cpufreq_unregister_driver(¢rino_driver); +} + +MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>"); +MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors."); +MODULE_LICENSE ("GPL"); + +late_initcall(centrino_init); +module_exit(centrino_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c new file mode 100644 index 000000000000..a5b2346faf1f --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c @@ -0,0 +1,440 @@ +/* + * (C) 2001 Dave Jones, Arjan van de ven. + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Licensed under the terms of the GNU GPL License version 2. + * Based upon reverse engineered information, and on Intel documentation + * for chipsets ICH2-M and ICH3-M. + * + * Many thanks to Ducrot Bruno for finding and fixing the last + * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler + * for extensive testing. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + + +/********************************************************************* + * SPEEDSTEP - DEFINITIONS * + *********************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/sched.h> + +#include "speedstep-lib.h" + + +/* speedstep_chipset: + * It is necessary to know which chipset is used. As accesses to + * this device occur at various places in this module, we need a + * static struct pci_dev * pointing to that device. + */ +static struct pci_dev *speedstep_chipset_dev; + + +/* speedstep_processor + */ +static unsigned int speedstep_processor = 0; + +static u32 pmbase; + +/* + * There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +static struct cpufreq_frequency_table speedstep_freqs[] = { + {SPEEDSTEP_HIGH, 0}, + {SPEEDSTEP_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg) + + +/** + * speedstep_find_register - read the PMBASE address + * + * Returns: -ENODEV if no register could be found + */ +static int speedstep_find_register (void) +{ + if (!speedstep_chipset_dev) + return -ENODEV; + + /* get PMBASE */ + pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); + if (!(pmbase & 0x01)) { + printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); + return -ENODEV; + } + + pmbase &= 0xFFFFFFFE; + if (!pmbase) { + printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); + return -ENODEV; + } + + dprintk("pmbase is 0x%x\n", pmbase); + return 0; +} + +/** + * speedstep_set_state - set the SpeedStep state + * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) + * + * Tries to change the SpeedStep state. + */ +static void speedstep_set_state (unsigned int state) +{ + u8 pm2_blk; + u8 value; + unsigned long flags; + + if (state > 0x1) + return; + + /* Disable IRQs */ + local_irq_save(flags); + + /* read state */ + value = inb(pmbase + 0x50); + + dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); + + /* write new state */ + value &= 0xFE; + value |= state; + + dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase); + + /* Disable bus master arbitration */ + pm2_blk = inb(pmbase + 0x20); + pm2_blk |= 0x01; + outb(pm2_blk, (pmbase + 0x20)); + + /* Actual transition */ + outb(value, (pmbase + 0x50)); + + /* Restore bus master arbitration */ + pm2_blk &= 0xfe; + outb(pm2_blk, (pmbase + 0x20)); + + /* check if transition was successful */ + value = inb(pmbase + 0x50); + + /* Enable IRQs */ + local_irq_restore(flags); + + dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); + + if (state == (value & 0x1)) { + dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000)); + } else { + printk (KERN_ERR "cpufreq: change failed - I/O error\n"); + } + + return; +} + + +/** + * speedstep_activate - activate SpeedStep control in the chipset + * + * Tries to activate the SpeedStep status and control registers. + * Returns -EINVAL on an unsupported chipset, and zero on success. + */ +static int speedstep_activate (void) +{ + u16 value = 0; + + if (!speedstep_chipset_dev) + return -EINVAL; + + pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value); + if (!(value & 0x08)) { + value |= 0x08; + dprintk("activating SpeedStep (TM) registers\n"); + pci_write_config_word(speedstep_chipset_dev, 0x00A0, value); + } + + return 0; +} + + +/** + * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic + * + * Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to + * the LPC bridge / PM module which contains all power-management + * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected + * chipset, or zero on failure. + */ +static unsigned int speedstep_detect_chipset (void) +{ + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801DB_12, + PCI_ANY_ID, + PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) + return 4; /* 4-M */ + + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801CA_12, + PCI_ANY_ID, + PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) + return 3; /* 3-M */ + + + speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82801BA_10, + PCI_ANY_ID, + PCI_ANY_ID, + NULL); + if (speedstep_chipset_dev) { + /* speedstep.c causes lockups on Dell Inspirons 8000 and + * 8100 which use a pretty old revision of the 82815 + * host brige. Abort on these systems. + */ + static struct pci_dev *hostbridge; + + hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82815_MC, + PCI_ANY_ID, + PCI_ANY_ID, + NULL); + + if (!hostbridge) + return 2; /* 2-M */ + + if (hostbridge->revision < 5) { + dprintk("hostbridge does not support speedstep\n"); + speedstep_chipset_dev = NULL; + pci_dev_put(hostbridge); + return 0; + } + + pci_dev_put(hostbridge); + return 2; /* 2-M */ + } + + return 0; +} + +static unsigned int _speedstep_get(cpumask_t cpus) +{ + unsigned int speed; + cpumask_t cpus_allowed; + + cpus_allowed = current->cpus_allowed; + set_cpus_allowed(current, cpus); + speed = speedstep_get_processor_frequency(speedstep_processor); + set_cpus_allowed(current, cpus_allowed); + dprintk("detected %u kHz as current frequency\n", speed); + return speed; +} + +static unsigned int speedstep_get(unsigned int cpu) +{ + return _speedstep_get(cpumask_of_cpu(cpu)); +} + +/** + * speedstep_target - set a new CPUFreq policy + * @policy: new policy + * @target_freq: the target frequency + * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * + * Sets a new CPUFreq policy. + */ +static int speedstep_target (struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + struct cpufreq_freqs freqs; + cpumask_t cpus_allowed; + int i; + + if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) + return -EINVAL; + + freqs.old = _speedstep_get(policy->cpus); + freqs.new = speedstep_freqs[newstate].frequency; + freqs.cpu = policy->cpu; + + dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new); + + /* no transition necessary */ + if (freqs.old == freqs.new) + return 0; + + cpus_allowed = current->cpus_allowed; + + for_each_cpu_mask(i, policy->cpus) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + } + + /* switch to physical CPU where state is to be changed */ + set_cpus_allowed(current, policy->cpus); + + speedstep_set_state(newstate); + + /* allow to be run on all CPUs */ + set_cpus_allowed(current, cpus_allowed); + + for_each_cpu_mask(i, policy->cpus) { + freqs.cpu = i; + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + } + + return 0; +} + + +/** + * speedstep_verify - verifies a new CPUFreq policy + * @policy: new policy + * + * Limit must be within speedstep_low_freq and speedstep_high_freq, with + * at least one border included. + */ +static int speedstep_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); +} + + +static int speedstep_cpu_init(struct cpufreq_policy *policy) +{ + int result = 0; + unsigned int speed; + cpumask_t cpus_allowed; + + /* only run on CPU to be set, or on its sibling */ +#ifdef CONFIG_SMP + policy->cpus = cpu_sibling_map[policy->cpu]; +#endif + + cpus_allowed = current->cpus_allowed; + set_cpus_allowed(current, policy->cpus); + + /* detect low and high frequency and transition latency */ + result = speedstep_get_freqs(speedstep_processor, + &speedstep_freqs[SPEEDSTEP_LOW].frequency, + &speedstep_freqs[SPEEDSTEP_HIGH].frequency, + &policy->cpuinfo.transition_latency, + &speedstep_set_state); + set_cpus_allowed(current, cpus_allowed); + if (result) + return result; + + /* get current speed setting */ + speed = _speedstep_get(policy->cpus); + if (!speed) + return -EIO; + + dprintk("currently at %s speed setting - %i MHz\n", + (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", + (speed / 1000)); + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cur = speed; + + result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); + + return 0; +} + + +static int speedstep_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct freq_attr* speedstep_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + + +static struct cpufreq_driver speedstep_driver = { + .name = "speedstep-ich", + .verify = speedstep_verify, + .target = speedstep_target, + .init = speedstep_cpu_init, + .exit = speedstep_cpu_exit, + .get = speedstep_get, + .owner = THIS_MODULE, + .attr = speedstep_attr, +}; + + +/** + * speedstep_init - initializes the SpeedStep CPUFreq driver + * + * Initializes the SpeedStep support. Returns -ENODEV on unsupported + * devices, -EINVAL on problems during initiatization, and zero on + * success. + */ +static int __init speedstep_init(void) +{ + /* detect processor */ + speedstep_processor = speedstep_detect_processor(); + if (!speedstep_processor) { + dprintk("Intel(R) SpeedStep(TM) capable processor not found\n"); + return -ENODEV; + } + + /* detect chipset */ + if (!speedstep_detect_chipset()) { + dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n"); + return -ENODEV; + } + + /* activate speedstep support */ + if (speedstep_activate()) { + pci_dev_put(speedstep_chipset_dev); + return -EINVAL; + } + + if (speedstep_find_register()) + return -ENODEV; + + return cpufreq_register_driver(&speedstep_driver); +} + + +/** + * speedstep_exit - unregisters SpeedStep support + * + * Unregisters SpeedStep support. + */ +static void __exit speedstep_exit(void) +{ + pci_dev_put(speedstep_chipset_dev); + cpufreq_unregister_driver(&speedstep_driver); +} + + +MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges."); +MODULE_LICENSE ("GPL"); + +module_init(speedstep_init); +module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c new file mode 100644 index 000000000000..b1acc8ce3167 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c @@ -0,0 +1,444 @@ +/* + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Library for common functions for Intel SpeedStep v.1 and v.2 support + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> + +#include <asm/msr.h> +#include "speedstep-lib.h" + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg) + +#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK +static int relaxed_check = 0; +#else +#define relaxed_check 0 +#endif + +/********************************************************************* + * GET PROCESSOR CORE SPEED IN KHZ * + *********************************************************************/ + +static unsigned int pentium3_get_frequency (unsigned int processor) +{ + /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ + struct { + unsigned int ratio; /* Frequency Multiplier (x10) */ + u8 bitmap; /* power on configuration bits + [27, 25:22] (in MSR 0x2a) */ + } msr_decode_mult [] = { + { 30, 0x01 }, + { 35, 0x05 }, + { 40, 0x02 }, + { 45, 0x06 }, + { 50, 0x00 }, + { 55, 0x04 }, + { 60, 0x0b }, + { 65, 0x0f }, + { 70, 0x09 }, + { 75, 0x0d }, + { 80, 0x0a }, + { 85, 0x26 }, + { 90, 0x20 }, + { 100, 0x2b }, + { 0, 0xff } /* error or unknown value */ + }; + + /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ + struct { + unsigned int value; /* Front Side Bus speed in MHz */ + u8 bitmap; /* power on configuration bits [18: 19] + (in MSR 0x2a) */ + } msr_decode_fsb [] = { + { 66, 0x0 }, + { 100, 0x2 }, + { 133, 0x1 }, + { 0, 0xff} + }; + + u32 msr_lo, msr_tmp; + int i = 0, j = 0; + + /* read MSR 0x2a - we only need the low 32 bits */ + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); + dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); + msr_tmp = msr_lo; + + /* decode the FSB */ + msr_tmp &= 0x00c0000; + msr_tmp >>= 18; + while (msr_tmp != msr_decode_fsb[i].bitmap) { + if (msr_decode_fsb[i].bitmap == 0xff) + return 0; + i++; + } + + /* decode the multiplier */ + if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) { + dprintk("workaround for early PIIIs\n"); + msr_lo &= 0x03c00000; + } else + msr_lo &= 0x0bc00000; + msr_lo >>= 22; + while (msr_lo != msr_decode_mult[j].bitmap) { + if (msr_decode_mult[j].bitmap == 0xff) + return 0; + j++; + } + + dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); + + return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100); +} + + +static unsigned int pentiumM_get_frequency(void) +{ + u32 msr_lo, msr_tmp; + + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); + dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); + + /* see table B-2 of 24547212.pdf */ + if (msr_lo & 0x00040000) { + printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp); + return 0; + } + + msr_tmp = (msr_lo >> 22) & 0x1f; + dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000)); + + return (msr_tmp * 100 * 1000); +} + +static unsigned int pentium_core_get_frequency(void) +{ + u32 fsb = 0; + u32 msr_lo, msr_tmp; + + rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); + /* see table B-2 of 25366920.pdf */ + switch (msr_lo & 0x07) { + case 5: + fsb = 100000; + break; + case 1: + fsb = 133333; + break; + case 3: + fsb = 166667; + break; + default: + printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value"); + } + + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); + dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); + + msr_tmp = (msr_lo >> 22) & 0x1f; + dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb)); + + return (msr_tmp * fsb); +} + + +static unsigned int pentium4_get_frequency(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + u32 msr_lo, msr_hi, mult; + unsigned int fsb = 0; + + rdmsr(0x2c, msr_lo, msr_hi); + + dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); + + /* decode the FSB: see IA-32 Intel (C) Architecture Software + * Developer's Manual, Volume 3: System Prgramming Guide, + * revision #12 in Table B-1: MSRs in the Pentium 4 and + * Intel Xeon Processors, on page B-4 and B-5. + */ + if (c->x86_model < 2) + fsb = 100 * 1000; + else { + u8 fsb_code = (msr_lo >> 16) & 0x7; + switch (fsb_code) { + case 0: + fsb = 100 * 1000; + break; + case 1: + fsb = 13333 * 10; + break; + case 2: + fsb = 200 * 1000; + break; + } + } + + if (!fsb) + printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n"); + + /* Multiplier. */ + if (c->x86_model < 2) + mult = msr_lo >> 27; + else + mult = msr_lo >> 24; + + dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult)); + + return (fsb * mult); +} + + +unsigned int speedstep_get_processor_frequency(unsigned int processor) +{ + switch (processor) { + case SPEEDSTEP_PROCESSOR_PCORE: + return pentium_core_get_frequency(); + case SPEEDSTEP_PROCESSOR_PM: + return pentiumM_get_frequency(); + case SPEEDSTEP_PROCESSOR_P4D: + case SPEEDSTEP_PROCESSOR_P4M: + return pentium4_get_frequency(); + case SPEEDSTEP_PROCESSOR_PIII_T: + case SPEEDSTEP_PROCESSOR_PIII_C: + case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: + return pentium3_get_frequency(processor); + default: + return 0; + }; + return 0; +} +EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency); + + +/********************************************************************* + * DETECT SPEEDSTEP-CAPABLE PROCESSOR * + *********************************************************************/ + +unsigned int speedstep_detect_processor (void) +{ + struct cpuinfo_x86 *c = cpu_data; + u32 ebx, msr_lo, msr_hi; + + dprintk("x86: %x, model: %x\n", c->x86, c->x86_model); + + if ((c->x86_vendor != X86_VENDOR_INTEL) || + ((c->x86 != 6) && (c->x86 != 0xF))) + return 0; + + if (c->x86 == 0xF) { + /* Intel Mobile Pentium 4-M + * or Intel Mobile Pentium 4 with 533 MHz FSB */ + if (c->x86_model != 2) + return 0; + + ebx = cpuid_ebx(0x00000001); + ebx &= 0x000000FF; + + dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); + + switch (c->x86_mask) { + case 4: + /* + * B-stepping [M-P4-M] + * sample has ebx = 0x0f, production has 0x0e. + */ + if ((ebx == 0x0e) || (ebx == 0x0f)) + return SPEEDSTEP_PROCESSOR_P4M; + break; + case 7: + /* + * C-stepping [M-P4-M] + * needs to have ebx=0x0e, else it's a celeron: + * cf. 25130917.pdf / page 7, footnote 5 even + * though 25072120.pdf / page 7 doesn't say + * samples are only of B-stepping... + */ + if (ebx == 0x0e) + return SPEEDSTEP_PROCESSOR_P4M; + break; + case 9: + /* + * D-stepping [M-P4-M or M-P4/533] + * + * this is totally strange: CPUID 0x0F29 is + * used by M-P4-M, M-P4/533 and(!) Celeron CPUs. + * The latter need to be sorted out as they don't + * support speedstep. + * Celerons with CPUID 0x0F29 may have either + * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything + * specific. + * M-P4-Ms may have either ebx=0xe or 0xf [see above] + * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] + * also, M-P4M HTs have ebx=0x8, too + * For now, they are distinguished by the model_id string + */ + if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) + return SPEEDSTEP_PROCESSOR_P4M; + break; + default: + break; + } + return 0; + } + + switch (c->x86_model) { + case 0x0B: /* Intel PIII [Tualatin] */ + /* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */ + ebx = cpuid_ebx(0x00000001); + dprintk("ebx is %x\n", ebx); + + ebx &= 0x000000FF; + + if (ebx != 0x06) + return 0; + + /* So far all PIII-M processors support SpeedStep. See + * Intel's 24540640.pdf of June 2003 + */ + return SPEEDSTEP_PROCESSOR_PIII_T; + + case 0x08: /* Intel PIII [Coppermine] */ + + /* all mobile PIII Coppermines have FSB 100 MHz + * ==> sort out a few desktop PIIIs. */ + rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); + dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi); + msr_lo &= 0x00c0000; + if (msr_lo != 0x0080000) + return 0; + + /* + * If the processor is a mobile version, + * platform ID has bit 50 set + * it has SpeedStep technology if either + * bit 56 or 57 is set + */ + rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); + dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi); + if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) { + if (c->x86_mask == 0x01) { + dprintk("early PIII version\n"); + return SPEEDSTEP_PROCESSOR_PIII_C_EARLY; + } else + return SPEEDSTEP_PROCESSOR_PIII_C; + } + + default: + return 0; + } +} +EXPORT_SYMBOL_GPL(speedstep_detect_processor); + + +/********************************************************************* + * DETECT SPEEDSTEP SPEEDS * + *********************************************************************/ + +unsigned int speedstep_get_freqs(unsigned int processor, + unsigned int *low_speed, + unsigned int *high_speed, + unsigned int *transition_latency, + void (*set_state) (unsigned int state)) +{ + unsigned int prev_speed; + unsigned int ret = 0; + unsigned long flags; + struct timeval tv1, tv2; + + if ((!processor) || (!low_speed) || (!high_speed) || (!set_state)) + return -EINVAL; + + dprintk("trying to determine both speeds\n"); + + /* get current speed */ + prev_speed = speedstep_get_processor_frequency(processor); + if (!prev_speed) + return -EIO; + + dprintk("previous speed is %u\n", prev_speed); + + local_irq_save(flags); + + /* switch to low state */ + set_state(SPEEDSTEP_LOW); + *low_speed = speedstep_get_processor_frequency(processor); + if (!*low_speed) { + ret = -EIO; + goto out; + } + + dprintk("low speed is %u\n", *low_speed); + + /* start latency measurement */ + if (transition_latency) + do_gettimeofday(&tv1); + + /* switch to high state */ + set_state(SPEEDSTEP_HIGH); + + /* end latency measurement */ + if (transition_latency) + do_gettimeofday(&tv2); + + *high_speed = speedstep_get_processor_frequency(processor); + if (!*high_speed) { + ret = -EIO; + goto out; + } + + dprintk("high speed is %u\n", *high_speed); + + if (*low_speed == *high_speed) { + ret = -ENODEV; + goto out; + } + + /* switch to previous state, if necessary */ + if (*high_speed != prev_speed) + set_state(SPEEDSTEP_LOW); + + if (transition_latency) { + *transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC + + tv2.tv_usec - tv1.tv_usec; + dprintk("transition latency is %u uSec\n", *transition_latency); + + /* convert uSec to nSec and add 20% for safety reasons */ + *transition_latency *= 1200; + + /* check if the latency measurement is too high or too low + * and set it to a safe value (500uSec) in that case + */ + if (*transition_latency > 10000000 || *transition_latency < 50000) { + printk (KERN_WARNING "speedstep: frequency transition measured seems out of " + "range (%u nSec), falling back to a safe one of %u nSec.\n", + *transition_latency, 500000); + *transition_latency = 500000; + } + } + +out: + local_irq_restore(flags); + return (ret); +} +EXPORT_SYMBOL_GPL(speedstep_get_freqs); + +#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK +module_param(relaxed_check, int, 0444); +MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability."); +#endif + +MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); +MODULE_LICENSE ("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h new file mode 100644 index 000000000000..b11bcc608cac --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h @@ -0,0 +1,49 @@ +/* + * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> + * + * Licensed under the terms of the GNU GPL License version 2. + * + * Library for common functions for Intel SpeedStep v.1 and v.2 support + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + + + +/* processors */ + +#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */ +#define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */ +#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ +#define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */ + +/* the following processors are not speedstep-capable and are not auto-detected + * in speedstep_detect_processor(). However, their speed can be detected using + * the speedstep_get_processor_frequency() call. */ +#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */ +#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */ +#define SPEEDSTEP_PROCESSOR_PCORE 0xFFFFFF05 /* Core */ + +/* speedstep states -- only two of them */ + +#define SPEEDSTEP_HIGH 0x00000000 +#define SPEEDSTEP_LOW 0x00000001 + + +/* detect a speedstep-capable processor */ +extern unsigned int speedstep_detect_processor (void); + +/* detect the current speed (in khz) of the processor */ +extern unsigned int speedstep_get_processor_frequency(unsigned int processor); + + +/* detect the low and high speeds of the processor. The callback + * set_state"'s first argument is either SPEEDSTEP_HIGH or + * SPEEDSTEP_LOW; the second argument is zero so that no + * cpufreq_notify_transition calls are initiated. + */ +extern unsigned int speedstep_get_freqs(unsigned int processor, + unsigned int *low_speed, + unsigned int *high_speed, + unsigned int *transition_latency, + void (*set_state) (unsigned int state)); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c new file mode 100644 index 000000000000..e1c509aa3054 --- /dev/null +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c @@ -0,0 +1,424 @@ +/* + * Intel SpeedStep SMI driver. + * + * (C) 2003 Hiroshi Miura <miura@da-cha.org> + * + * Licensed under the terms of the GNU GPL License version 2. + * + */ + + +/********************************************************************* + * SPEEDSTEP - DEFINITIONS * + *********************************************************************/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <asm/ist.h> +#include <asm/io.h> + +#include "speedstep-lib.h" + +/* speedstep system management interface port/command. + * + * These parameters are got from IST-SMI BIOS call. + * If user gives it, these are used. + * + */ +static int smi_port = 0; +static int smi_cmd = 0; +static unsigned int smi_sig = 0; + +/* info about the processor */ +static unsigned int speedstep_processor = 0; + +/* + * There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +static struct cpufreq_frequency_table speedstep_freqs[] = { + {SPEEDSTEP_HIGH, 0}, + {SPEEDSTEP_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +#define GET_SPEEDSTEP_OWNER 0 +#define GET_SPEEDSTEP_STATE 1 +#define SET_SPEEDSTEP_STATE 2 +#define GET_SPEEDSTEP_FREQS 4 + +/* how often shall the SMI call be tried if it failed, e.g. because + * of DMA activity going on? */ +#define SMI_TRIES 5 + +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg) + +/** + * speedstep_smi_ownership + */ +static int speedstep_smi_ownership (void) +{ + u32 command, result, magic; + u32 function = GET_SPEEDSTEP_OWNER; + unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation"; + + command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); + magic = virt_to_phys(magic_data); + + dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port); + + __asm__ __volatile__( + "out %%al, (%%dx)\n" + : "=D" (result) + : "a" (command), "b" (function), "c" (0), "d" (smi_port), + "D" (0), "S" (magic) + : "memory" + ); + + dprintk("result is %x\n", result); + + return result; +} + +/** + * speedstep_smi_get_freqs - get SpeedStep preferred & current freq. + * @low: the low frequency value is placed here + * @high: the high frequency value is placed here + * + * Only available on later SpeedStep-enabled systems, returns false results or + * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing + * shows that the latter occurs if !(ist_info.event & 0xFFFF). + */ +static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) +{ + u32 command, result = 0, edi, high_mhz, low_mhz; + u32 state=0; + u32 function = GET_SPEEDSTEP_FREQS; + + if (!(ist_info.event & 0xFFFF)) { + dprintk("bug #1422 -- can't read freqs from BIOS\n"); + return -ENODEV; + } + + command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); + + dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port); + + __asm__ __volatile__("movl $0, %%edi\n" + "out %%al, (%%dx)\n" + : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi) + : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0) + ); + + dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz); + + /* abort if results are obviously incorrect... */ + if ((high_mhz + low_mhz) < 600) + return -EINVAL; + + *high = high_mhz * 1000; + *low = low_mhz * 1000; + + return result; +} + +/** + * speedstep_get_state - set the SpeedStep state + * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) + * + */ +static int speedstep_get_state (void) +{ + u32 function=GET_SPEEDSTEP_STATE; + u32 result, state, edi, command; + + command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); + + dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port); + + __asm__ __volatile__("movl $0, %%edi\n" + "out %%al, (%%dx)\n" + : "=a" (result), "=b" (state), "=D" (edi) + : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0) + ); + + dprintk("state is %x, result is %x\n", state, result); + + return (state & 1); +} + + +/** + * speedstep_set_state - set the SpeedStep state + * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) + * + */ +static void speedstep_set_state (unsigned int state) +{ + unsigned int result = 0, command, new_state; + unsigned long flags; + unsigned int function=SET_SPEEDSTEP_STATE; + unsigned int retry = 0; + + if (state > 0x1) + return; + + /* Disable IRQs */ + local_irq_save(flags); + + command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); + + dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port); + + do { + if (retry) { + dprintk("retry %u, previous result %u, waiting...\n", retry, result); + mdelay(retry * 50); + } + retry++; + __asm__ __volatile__( + "movl $0, %%edi\n" + "out %%al, (%%dx)\n" + : "=b" (new_state), "=D" (result) + : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0) + ); + } while ((new_state != state) && (retry <= SMI_TRIES)); + + /* enable IRQs */ + local_irq_restore(flags); + + if (new_state == state) { + dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result); + } else { + printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result); + } + + return; +} + + +/** + * speedstep_target - set a new CPUFreq policy + * @policy: new policy + * @target_freq: new freq + * @relation: + * + * Sets a new CPUFreq policy/freq. + */ +static int speedstep_target (struct cpufreq_policy *policy, + unsigned int target_freq, unsigned int relation) +{ + unsigned int newstate = 0; + struct cpufreq_freqs freqs; + + if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) + return -EINVAL; + + freqs.old = speedstep_freqs[speedstep_get_state()].frequency; + freqs.new = speedstep_freqs[newstate].frequency; + freqs.cpu = 0; /* speedstep.c is UP only driver */ + + if (freqs.old == freqs.new) + return 0; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + speedstep_set_state(newstate); + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + + +/** + * speedstep_verify - verifies a new CPUFreq policy + * @policy: new policy + * + * Limit must be within speedstep_low_freq and speedstep_high_freq, with + * at least one border included. + */ +static int speedstep_verify (struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); +} + + +static int speedstep_cpu_init(struct cpufreq_policy *policy) +{ + int result; + unsigned int speed,state; + + /* capability check */ + if (policy->cpu != 0) + return -ENODEV; + + result = speedstep_smi_ownership(); + if (result) { + dprintk("fails in aquiring ownership of a SMI interface.\n"); + return -EINVAL; + } + + /* detect low and high frequency */ + result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency, + &speedstep_freqs[SPEEDSTEP_HIGH].frequency); + if (result) { + /* fall back to speedstep_lib.c dection mechanism: try both states out */ + dprintk("could not detect low and high frequencies by SMI call.\n"); + result = speedstep_get_freqs(speedstep_processor, + &speedstep_freqs[SPEEDSTEP_LOW].frequency, + &speedstep_freqs[SPEEDSTEP_HIGH].frequency, + NULL, + &speedstep_set_state); + + if (result) { + dprintk("could not detect two different speeds -- aborting.\n"); + return result; + } else + dprintk("workaround worked.\n"); + } + + /* get current speed setting */ + state = speedstep_get_state(); + speed = speedstep_freqs[state].frequency; + + dprintk("currently at %s speed setting - %i MHz\n", + (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", + (speed / 1000)); + + /* cpuinfo and default policy values */ + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = speed; + + result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); + if (result) + return (result); + + cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); + + return 0; +} + +static int speedstep_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static unsigned int speedstep_get(unsigned int cpu) +{ + if (cpu) + return -ENODEV; + return speedstep_get_processor_frequency(speedstep_processor); +} + + +static int speedstep_resume(struct cpufreq_policy *policy) +{ + int result = speedstep_smi_ownership(); + + if (result) + dprintk("fails in re-aquiring ownership of a SMI interface.\n"); + + return result; +} + +static struct freq_attr* speedstep_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver speedstep_driver = { + .name = "speedstep-smi", + .verify = speedstep_verify, + .target = speedstep_target, + .init = speedstep_cpu_init, + .exit = speedstep_cpu_exit, + .get = speedstep_get, + .resume = speedstep_resume, + .owner = THIS_MODULE, + .attr = speedstep_attr, +}; + +/** + * speedstep_init - initializes the SpeedStep CPUFreq driver + * + * Initializes the SpeedStep support. Returns -ENODEV on unsupported + * BIOS, -EINVAL on problems during initiatization, and zero on + * success. + */ +static int __init speedstep_init(void) +{ + speedstep_processor = speedstep_detect_processor(); + + switch (speedstep_processor) { + case SPEEDSTEP_PROCESSOR_PIII_T: + case SPEEDSTEP_PROCESSOR_PIII_C: + case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: + break; + default: + speedstep_processor = 0; + } + + if (!speedstep_processor) { + dprintk ("No supported Intel CPU detected.\n"); + return -ENODEV; + } + + dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", + ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level); + + /* Error if no IST-SMI BIOS or no PARM + sig= 'ISGE' aka 'Intel Speedstep Gate E' */ + if ((ist_info.signature != 0x47534943) && ( + (smi_port == 0) || (smi_cmd == 0))) + return -ENODEV; + + if (smi_sig == 1) + smi_sig = 0x47534943; + else + smi_sig = ist_info.signature; + + /* setup smi_port from MODLULE_PARM or BIOS */ + if ((smi_port > 0xff) || (smi_port < 0)) + return -EINVAL; + else if (smi_port == 0) + smi_port = ist_info.command & 0xff; + + if ((smi_cmd > 0xff) || (smi_cmd < 0)) + return -EINVAL; + else if (smi_cmd == 0) + smi_cmd = (ist_info.command >> 16) & 0xff; + + return cpufreq_register_driver(&speedstep_driver); +} + + +/** + * speedstep_exit - unregisters SpeedStep support + * + * Unregisters SpeedStep support. + */ +static void __exit speedstep_exit(void) +{ + cpufreq_unregister_driver(&speedstep_driver); +} + +module_param(smi_port, int, 0444); +module_param(smi_cmd, int, 0444); +module_param(smi_sig, uint, 0444); + +MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2"); +MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82"); +MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface."); + +MODULE_AUTHOR ("Hiroshi Miura"); +MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface."); +MODULE_LICENSE ("GPL"); + +module_init(speedstep_init); +module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c new file mode 100644 index 000000000000..122d2d75aa9f --- /dev/null +++ b/arch/x86/kernel/cpu/cyrix.c @@ -0,0 +1,463 @@ +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/processor-cyrix.h> +#include <asm/timer.h> +#include <asm/pci-direct.h> +#include <asm/tsc.h> + +#include "cpu.h" + +/* + * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU + */ +static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) +{ + unsigned char ccr2, ccr3; + unsigned long flags; + + /* we test for DEVID by checking whether CCR3 is writable */ + local_irq_save(flags); + ccr3 = getCx86(CX86_CCR3); + setCx86(CX86_CCR3, ccr3 ^ 0x80); + getCx86(0xc0); /* dummy to change bus */ + + if (getCx86(CX86_CCR3) == ccr3) { /* no DEVID regs. */ + ccr2 = getCx86(CX86_CCR2); + setCx86(CX86_CCR2, ccr2 ^ 0x04); + getCx86(0xc0); /* dummy */ + + if (getCx86(CX86_CCR2) == ccr2) /* old Cx486SLC/DLC */ + *dir0 = 0xfd; + else { /* Cx486S A step */ + setCx86(CX86_CCR2, ccr2); + *dir0 = 0xfe; + } + } + else { + setCx86(CX86_CCR3, ccr3); /* restore CCR3 */ + + /* read DIR0 and DIR1 CPU registers */ + *dir0 = getCx86(CX86_DIR0); + *dir1 = getCx86(CX86_DIR1); + } + local_irq_restore(flags); +} + +/* + * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in + * order to identify the Cyrix CPU model after we're out of setup.c + * + * Actually since bugs.h doesn't even reference this perhaps someone should + * fix the documentation ??? + */ +static unsigned char Cx86_dir0_msb __cpuinitdata = 0; + +static char Cx86_model[][9] __cpuinitdata = { + "Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ", + "M II ", "Unknown" +}; +static char Cx486_name[][5] __cpuinitdata = { + "SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx", + "SRx2", "DRx2" +}; +static char Cx486S_name[][4] __cpuinitdata = { + "S", "S2", "Se", "S2e" +}; +static char Cx486D_name[][4] __cpuinitdata = { + "DX", "DX2", "?", "?", "?", "DX4" +}; +static char Cx86_cb[] __cpuinitdata = "?.5x Core/Bus Clock"; +static char cyrix_model_mult1[] __cpuinitdata = "12??43"; +static char cyrix_model_mult2[] __cpuinitdata = "12233445"; + +/* + * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old + * BIOSes for compatibility with DOS games. This makes the udelay loop + * work correctly, and improves performance. + * + * FIXME: our newer udelay uses the tsc. We don't need to frob with SLOP + */ + +extern void calibrate_delay(void) __init; + +static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c) +{ + unsigned long flags; + + if (Cx86_dir0_msb == 3) { + unsigned char ccr3, ccr5; + + local_irq_save(flags); + ccr3 = getCx86(CX86_CCR3); + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + ccr5 = getCx86(CX86_CCR5); + if (ccr5 & 2) + setCx86(CX86_CCR5, ccr5 & 0xfd); /* reset SLOP */ + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ + local_irq_restore(flags); + + if (ccr5 & 2) { /* possible wrong calibration done */ + printk(KERN_INFO "Recalibrating delay loop with SLOP bit reset\n"); + calibrate_delay(); + c->loops_per_jiffy = loops_per_jiffy; + } + } +} + + +static void __cpuinit set_cx86_reorder(void) +{ + u8 ccr3; + + printk(KERN_INFO "Enable Memory access reorder on Cyrix/NSC processor.\n"); + ccr3 = getCx86(CX86_CCR3); + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + + /* Load/Store Serialize to mem access disable (=reorder it) */ + setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80); + /* set load/store serialize from 1GB to 4GB */ + ccr3 |= 0xe0; + setCx86(CX86_CCR3, ccr3); +} + +static void __cpuinit set_cx86_memwb(void) +{ + u32 cr0; + + printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n"); + + /* CCR2 bit 2: unlock NW bit */ + setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04); + /* set 'Not Write-through' */ + cr0 = 0x20000000; + write_cr0(read_cr0() | cr0); + /* CCR2 bit 2: lock NW bit and set WT1 */ + setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 ); +} + +static void __cpuinit set_cx86_inc(void) +{ + unsigned char ccr3; + + printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n"); + + ccr3 = getCx86(CX86_CCR3); + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + /* PCR1 -- Performance Control */ + /* Incrementor on, whatever that is */ + setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02); + /* PCR0 -- Performance Control */ + /* Incrementor Margin 10 */ + setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04); + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ +} + +/* + * Configure later MediaGX and/or Geode processor. + */ + +static void __cpuinit geode_configure(void) +{ + unsigned long flags; + u8 ccr3; + local_irq_save(flags); + + /* Suspend on halt power saving and enable #SUSP pin */ + setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); + + ccr3 = getCx86(CX86_CCR3); + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + + + /* FPU fast, DTE cache, Mem bypass */ + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38); + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ + + set_cx86_memwb(); + set_cx86_reorder(); + set_cx86_inc(); + + local_irq_restore(flags); +} + + +static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) +{ + unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0; + char *buf = c->x86_model_id; + const char *p = NULL; + + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; + 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + clear_bit(0*32+31, c->x86_capability); + + /* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */ + if ( test_bit(1*32+24, c->x86_capability) ) { + clear_bit(1*32+24, c->x86_capability); + set_bit(X86_FEATURE_CXMMX, c->x86_capability); + } + + do_cyrix_devid(&dir0, &dir1); + + check_cx686_slop(c); + + Cx86_dir0_msb = dir0_msn = dir0 >> 4; /* identifies CPU "family" */ + dir0_lsn = dir0 & 0xf; /* model or clock multiplier */ + + /* common case step number/rev -- exceptions handled below */ + c->x86_model = (dir1 >> 4) + 1; + c->x86_mask = dir1 & 0xf; + + /* Now cook; the original recipe is by Channing Corn, from Cyrix. + * We do the same thing for each generation: we work out + * the model, multiplier and stepping. Black magic included, + * to make the silicon step/rev numbers match the printed ones. + */ + + switch (dir0_msn) { + unsigned char tmp; + + case 0: /* Cx486SLC/DLC/SRx/DRx */ + p = Cx486_name[dir0_lsn & 7]; + break; + + case 1: /* Cx486S/DX/DX2/DX4 */ + p = (dir0_lsn & 8) ? Cx486D_name[dir0_lsn & 5] + : Cx486S_name[dir0_lsn & 3]; + break; + + case 2: /* 5x86 */ + Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5]; + p = Cx86_cb+2; + break; + + case 3: /* 6x86/6x86L */ + Cx86_cb[1] = ' '; + Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5]; + if (dir1 > 0x21) { /* 686L */ + Cx86_cb[0] = 'L'; + p = Cx86_cb; + (c->x86_model)++; + } else /* 686 */ + p = Cx86_cb+1; + /* Emulate MTRRs using Cyrix's ARRs. */ + set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability); + /* 6x86's contain this bug */ + c->coma_bug = 1; + break; + + case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */ +#ifdef CONFIG_PCI + { + u32 vendor, device; + /* It isn't really a PCI quirk directly, but the cure is the + same. The MediaGX has deep magic SMM stuff that handles the + SB emulation. It thows away the fifo on disable_dma() which + is wrong and ruins the audio. + + Bug2: VSA1 has a wrap bug so that using maximum sized DMA + causes bad things. According to NatSemi VSA2 has another + bug to do with 'hlt'. I've not seen any boards using VSA2 + and X doesn't seem to support it either so who cares 8). + VSA1 we work around however. + */ + + printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n"); + isa_dma_bridge_buggy = 2; + + /* We do this before the PCI layer is running. However we + are safe here as we know the bridge must be a Cyrix + companion and must be present */ + vendor = read_pci_config_16(0, 0, 0x12, PCI_VENDOR_ID); + device = read_pci_config_16(0, 0, 0x12, PCI_DEVICE_ID); + + /* + * The 5510/5520 companion chips have a funky PIT. + */ + if (vendor == PCI_VENDOR_ID_CYRIX && + (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520)) + mark_tsc_unstable("cyrix 5510/5520 detected"); + } +#endif + c->x86_cache_size=16; /* Yep 16K integrated cache thats it */ + + /* GXm supports extended cpuid levels 'ala' AMD */ + if (c->cpuid_level == 2) { + /* Enable cxMMX extensions (GX1 Datasheet 54) */ + setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1); + + /* + * GXm : 0x30 ... 0x5f GXm datasheet 51 + * GXlv: 0x6x GXlv datasheet 54 + * ? : 0x7x + * GX1 : 0x8x GX1 datasheet 56 + */ + if((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <=dir1 && dir1 <= 0x8f)) + geode_configure(); + get_model_name(c); /* get CPU marketing name */ + return; + } + else { /* MediaGX */ + Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4'; + p = Cx86_cb+2; + c->x86_model = (dir1 & 0x20) ? 1 : 2; + } + break; + + case 5: /* 6x86MX/M II */ + if (dir1 > 7) + { + dir0_msn++; /* M II */ + /* Enable MMX extensions (App note 108) */ + setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1); + } + else + { + c->coma_bug = 1; /* 6x86MX, it has the bug. */ + } + tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0; + Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7]; + p = Cx86_cb+tmp; + if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20)) + (c->x86_model)++; + /* Emulate MTRRs using Cyrix's ARRs. */ + set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability); + break; + + case 0xf: /* Cyrix 486 without DEVID registers */ + switch (dir0_lsn) { + case 0xd: /* either a 486SLC or DLC w/o DEVID */ + dir0_msn = 0; + p = Cx486_name[(c->hard_math) ? 1 : 0]; + break; + + case 0xe: /* a 486S A step */ + dir0_msn = 0; + p = Cx486S_name[0]; + break; + } + break; + + default: /* unknown (shouldn't happen, we know everyone ;-) */ + dir0_msn = 7; + break; + } + strcpy(buf, Cx86_model[dir0_msn & 7]); + if (p) strcat(buf, p); + return; +} + +/* + * Handle National Semiconductor branded processors + */ +static void __cpuinit init_nsc(struct cpuinfo_x86 *c) +{ + /* There may be GX1 processors in the wild that are branded + * NSC and not Cyrix. + * + * This function only handles the GX processor, and kicks every + * thing else to the Cyrix init function above - that should + * cover any processors that might have been branded differently + * after NSC acquired Cyrix. + * + * If this breaks your GX1 horribly, please e-mail + * info-linux@ldcmail.amd.com to tell us. + */ + + /* Handle the GX (Formally known as the GX2) */ + + if (c->x86 == 5 && c->x86_model == 5) + display_cacheinfo(c); + else + init_cyrix(c); +} + +/* + * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected + * by the fact that they preserve the flags across the division of 5/2. + * PII and PPro exhibit this behavior too, but they have cpuid available. + */ + +/* + * Perform the Cyrix 5/2 test. A Cyrix won't change + * the flags, while other 486 chips will. + */ +static inline int test_cyrix_52div(void) +{ + unsigned int test; + + __asm__ __volatile__( + "sahf\n\t" /* clear flags (%eax = 0x0005) */ + "div %b2\n\t" /* divide 5 by 2 */ + "lahf" /* store flags into %ah */ + : "=a" (test) + : "0" (5), "q" (2) + : "cc"); + + /* AH is 0x02 on Cyrix after the divide.. */ + return (unsigned char) (test >> 8) == 0x02; +} + +static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c) +{ + /* Detect Cyrix with disabled CPUID */ + if ( c->x86 == 4 && test_cyrix_52div() ) { + unsigned char dir0, dir1; + + strcpy(c->x86_vendor_id, "CyrixInstead"); + c->x86_vendor = X86_VENDOR_CYRIX; + + /* Actually enable cpuid on the older cyrix */ + + /* Retrieve CPU revisions */ + + do_cyrix_devid(&dir0, &dir1); + + dir0>>=4; + + /* Check it is an affected model */ + + if (dir0 == 5 || dir0 == 3) + { + unsigned char ccr3; + unsigned long flags; + printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n"); + local_irq_save(flags); + ccr3 = getCx86(CX86_CCR3); + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid */ + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ + local_irq_restore(flags); + } + } +} + +static struct cpu_dev cyrix_cpu_dev __cpuinitdata = { + .c_vendor = "Cyrix", + .c_ident = { "CyrixInstead" }, + .c_init = init_cyrix, + .c_identify = cyrix_identify, +}; + +int __init cyrix_init_cpu(void) +{ + cpu_devs[X86_VENDOR_CYRIX] = &cyrix_cpu_dev; + return 0; +} + +static struct cpu_dev nsc_cpu_dev __cpuinitdata = { + .c_vendor = "NSC", + .c_ident = { "Geode by NSC" }, + .c_init = init_nsc, +}; + +int __init nsc_init_cpu(void) +{ + cpu_devs[X86_VENDOR_NSC] = &nsc_cpu_dev; + return 0; +} + diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c new file mode 100644 index 000000000000..dc4e08147b1f --- /dev/null +++ b/arch/x86/kernel/cpu/intel.c @@ -0,0 +1,333 @@ +#include <linux/init.h> +#include <linux/kernel.h> + +#include <linux/string.h> +#include <linux/bitops.h> +#include <linux/smp.h> +#include <linux/thread_info.h> +#include <linux/module.h> + +#include <asm/processor.h> +#include <asm/msr.h> +#include <asm/uaccess.h> + +#include "cpu.h" + +#ifdef CONFIG_X86_LOCAL_APIC +#include <asm/mpspec.h> +#include <asm/apic.h> +#include <mach_apic.h> +#endif + +extern int trap_init_f00f_bug(void); + +#ifdef CONFIG_X86_INTEL_USERCOPY +/* + * Alignment at which movsl is preferred for bulk memory copies. + */ +struct movsl_mask movsl_mask __read_mostly; +#endif + +void __cpuinit early_intel_workaround(struct cpuinfo_x86 *c) +{ + if (c->x86_vendor != X86_VENDOR_INTEL) + return; + /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ + if (c->x86 == 15 && c->x86_cache_alignment == 64) + c->x86_cache_alignment = 128; +} + +/* + * Early probe support logic for ppro memory erratum #50 + * + * This is called before we do cpu ident work + */ + +int __cpuinit ppro_with_ram_bug(void) +{ + /* Uses data from early_cpu_detect now */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model == 1 && + boot_cpu_data.x86_mask < 8) { + printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n"); + return 1; + } + return 0; +} + + +/* + * P4 Xeon errata 037 workaround. + * Hardware prefetcher may cause stale data to be loaded into the cache. + */ +static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c) +{ + unsigned long lo, hi; + + if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) { + rdmsr (MSR_IA32_MISC_ENABLE, lo, hi); + if ((lo & (1<<9)) == 0) { + printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n"); + printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n"); + lo |= (1<<9); /* Disable hw prefetching */ + wrmsr (MSR_IA32_MISC_ENABLE, lo, hi); + } + } +} + + +/* + * find out the number of processor cores on the die + */ +static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c) +{ + unsigned int eax, ebx, ecx, edx; + + if (c->cpuid_level < 4) + return 1; + + /* Intel has a non-standard dependency on %ecx for this CPUID level. */ + cpuid_count(4, 0, &eax, &ebx, &ecx, &edx); + if (eax & 0x1f) + return ((eax >> 26) + 1); + else + return 1; +} + +static void __cpuinit init_intel(struct cpuinfo_x86 *c) +{ + unsigned int l2 = 0; + char *p = NULL; + +#ifdef CONFIG_X86_F00F_BUG + /* + * All current models of Pentium and Pentium with MMX technology CPUs + * have the F0 0F bug, which lets nonprivileged users lock up the system. + * Note that the workaround only should be initialized once... + */ + c->f00f_bug = 0; + if (!paravirt_enabled() && c->x86 == 5) { + static int f00f_workaround_enabled = 0; + + c->f00f_bug = 1; + if ( !f00f_workaround_enabled ) { + trap_init_f00f_bug(); + printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n"); + f00f_workaround_enabled = 1; + } + } +#endif + + select_idle_routine(c); + l2 = init_intel_cacheinfo(c); + if (c->cpuid_level > 9 ) { + unsigned eax = cpuid_eax(10); + /* Check for version and the number of counters */ + if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) + set_bit(X86_FEATURE_ARCH_PERFMON, c->x86_capability); + } + + /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */ + if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) + clear_bit(X86_FEATURE_SEP, c->x86_capability); + + /* Names for the Pentium II/Celeron processors + detectable only by also checking the cache size. + Dixon is NOT a Celeron. */ + if (c->x86 == 6) { + switch (c->x86_model) { + case 5: + if (c->x86_mask == 0) { + if (l2 == 0) + p = "Celeron (Covington)"; + else if (l2 == 256) + p = "Mobile Pentium II (Dixon)"; + } + break; + + case 6: + if (l2 == 128) + p = "Celeron (Mendocino)"; + else if (c->x86_mask == 0 || c->x86_mask == 5) + p = "Celeron-A"; + break; + + case 8: + if (l2 == 128) + p = "Celeron (Coppermine)"; + break; + } + } + + if ( p ) + strcpy(c->x86_model_id, p); + + c->x86_max_cores = num_cpu_cores(c); + + detect_ht(c); + + /* Work around errata */ + Intel_errata_workarounds(c); + +#ifdef CONFIG_X86_INTEL_USERCOPY + /* + * Set up the preferred alignment for movsl bulk memory moves + */ + switch (c->x86) { + case 4: /* 486: untested */ + break; + case 5: /* Old Pentia: untested */ + break; + case 6: /* PII/PIII only like movsl with 8-byte alignment */ + movsl_mask.mask = 7; + break; + case 15: /* P4 is OK down to 8-byte alignment */ + movsl_mask.mask = 7; + break; + } +#endif + + if (c->x86 == 15) { + set_bit(X86_FEATURE_P4, c->x86_capability); + set_bit(X86_FEATURE_SYNC_RDTSC, c->x86_capability); + } + if (c->x86 == 6) + set_bit(X86_FEATURE_P3, c->x86_capability); + if ((c->x86 == 0xf && c->x86_model >= 0x03) || + (c->x86 == 0x6 && c->x86_model >= 0x0e)) + set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability); + + if (cpu_has_ds) { + unsigned int l1; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_bit(X86_FEATURE_BTS, c->x86_capability); + if (!(l1 & (1<<12))) + set_bit(X86_FEATURE_PEBS, c->x86_capability); + } +} + +static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 * c, unsigned int size) +{ + /* Intel PIII Tualatin. This comes in two flavours. + * One has 256kb of cache, the other 512. We have no way + * to determine which, so we use a boottime override + * for the 512kb model, and assume 256 otherwise. + */ + if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0)) + size = 256; + return size; +} + +static struct cpu_dev intel_cpu_dev __cpuinitdata = { + .c_vendor = "Intel", + .c_ident = { "GenuineIntel" }, + .c_models = { + { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names = + { + [0] = "486 DX-25/33", + [1] = "486 DX-50", + [2] = "486 SX", + [3] = "486 DX/2", + [4] = "486 SL", + [5] = "486 SX/2", + [7] = "486 DX/2-WB", + [8] = "486 DX/4", + [9] = "486 DX/4-WB" + } + }, + { .vendor = X86_VENDOR_INTEL, .family = 5, .model_names = + { + [0] = "Pentium 60/66 A-step", + [1] = "Pentium 60/66", + [2] = "Pentium 75 - 200", + [3] = "OverDrive PODP5V83", + [4] = "Pentium MMX", + [7] = "Mobile Pentium 75 - 200", + [8] = "Mobile Pentium MMX" + } + }, + { .vendor = X86_VENDOR_INTEL, .family = 6, .model_names = + { + [0] = "Pentium Pro A-step", + [1] = "Pentium Pro", + [3] = "Pentium II (Klamath)", + [4] = "Pentium II (Deschutes)", + [5] = "Pentium II (Deschutes)", + [6] = "Mobile Pentium II", + [7] = "Pentium III (Katmai)", + [8] = "Pentium III (Coppermine)", + [10] = "Pentium III (Cascades)", + [11] = "Pentium III (Tualatin)", + } + }, + { .vendor = X86_VENDOR_INTEL, .family = 15, .model_names = + { + [0] = "Pentium 4 (Unknown)", + [1] = "Pentium 4 (Willamette)", + [2] = "Pentium 4 (Northwood)", + [4] = "Pentium 4 (Foster)", + [5] = "Pentium 4 (Foster)", + } + }, + }, + .c_init = init_intel, + .c_size_cache = intel_size_cache, +}; + +__init int intel_cpu_init(void) +{ + cpu_devs[X86_VENDOR_INTEL] = &intel_cpu_dev; + return 0; +} + +#ifndef CONFIG_X86_CMPXCHG +unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new) +{ + u8 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u8 *)ptr; + if (prev == old) + *(u8 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u8); + +unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new) +{ + u16 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u16 *)ptr; + if (prev == old) + *(u16 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u16); + +unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new) +{ + u32 prev; + unsigned long flags; + + /* Poor man's cmpxchg for 386. Unsuitable for SMP */ + local_irq_save(flags); + prev = *(u32 *)ptr; + if (prev == old) + *(u32 *)ptr = new; + local_irq_restore(flags); + return prev; +} +EXPORT_SYMBOL(cmpxchg_386_u32); +#endif + +// arch_initcall(intel_cpu_init); + diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c new file mode 100644 index 000000000000..db6c25aa5776 --- /dev/null +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -0,0 +1,806 @@ +/* + * Routines to indentify caches on Intel CPU. + * + * Changes: + * Venkatesh Pallipadi : Adding cache identification through cpuid(4) + * Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure. + * Andi Kleen / Andreas Herrmann : CPUID4 emulation on AMD. + */ + +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/compiler.h> +#include <linux/cpu.h> +#include <linux/sched.h> + +#include <asm/processor.h> +#include <asm/smp.h> + +#define LVL_1_INST 1 +#define LVL_1_DATA 2 +#define LVL_2 3 +#define LVL_3 4 +#define LVL_TRACE 5 + +struct _cache_table +{ + unsigned char descriptor; + char cache_type; + short size; +}; + +/* all the cache descriptor types we care about (no TLB or trace cache entries) */ +static struct _cache_table cache_table[] __cpuinitdata = +{ + { 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */ + { 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */ + { 0x0a, LVL_1_DATA, 8 }, /* 2 way set assoc, 32 byte line size */ + { 0x0c, LVL_1_DATA, 16 }, /* 4-way set assoc, 32 byte line size */ + { 0x22, LVL_3, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */ + { 0x23, LVL_3, 1024 }, /* 8-way set assoc, sectored cache, 64 byte line size */ + { 0x25, LVL_3, 2048 }, /* 8-way set assoc, sectored cache, 64 byte line size */ + { 0x29, LVL_3, 4096 }, /* 8-way set assoc, sectored cache, 64 byte line size */ + { 0x2c, LVL_1_DATA, 32 }, /* 8-way set assoc, 64 byte line size */ + { 0x30, LVL_1_INST, 32 }, /* 8-way set assoc, 64 byte line size */ + { 0x39, LVL_2, 128 }, /* 4-way set assoc, sectored cache, 64 byte line size */ + { 0x3a, LVL_2, 192 }, /* 6-way set assoc, sectored cache, 64 byte line size */ + { 0x3b, LVL_2, 128 }, /* 2-way set assoc, sectored cache, 64 byte line size */ + { 0x3c, LVL_2, 256 }, /* 4-way set assoc, sectored cache, 64 byte line size */ + { 0x3d, LVL_2, 384 }, /* 6-way set assoc, sectored cache, 64 byte line size */ + { 0x3e, LVL_2, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */ + { 0x41, LVL_2, 128 }, /* 4-way set assoc, 32 byte line size */ + { 0x42, LVL_2, 256 }, /* 4-way set assoc, 32 byte line size */ + { 0x43, LVL_2, 512 }, /* 4-way set assoc, 32 byte line size */ + { 0x44, LVL_2, 1024 }, /* 4-way set assoc, 32 byte line size */ + { 0x45, LVL_2, 2048 }, /* 4-way set assoc, 32 byte line size */ + { 0x46, LVL_3, 4096 }, /* 4-way set assoc, 64 byte line size */ + { 0x47, LVL_3, 8192 }, /* 8-way set assoc, 64 byte line size */ + { 0x49, LVL_3, 4096 }, /* 16-way set assoc, 64 byte line size */ + { 0x4a, LVL_3, 6144 }, /* 12-way set assoc, 64 byte line size */ + { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */ + { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size */ + { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size */ + { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */ + { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */ + { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */ + { 0x68, LVL_1_DATA, 32 }, /* 4-way set assoc, sectored cache, 64 byte line size */ + { 0x70, LVL_TRACE, 12 }, /* 8-way set assoc */ + { 0x71, LVL_TRACE, 16 }, /* 8-way set assoc */ + { 0x72, LVL_TRACE, 32 }, /* 8-way set assoc */ + { 0x73, LVL_TRACE, 64 }, /* 8-way set assoc */ + { 0x78, LVL_2, 1024 }, /* 4-way set assoc, 64 byte line size */ + { 0x79, LVL_2, 128 }, /* 8-way set assoc, sectored cache, 64 byte line size */ + { 0x7a, LVL_2, 256 }, /* 8-way set assoc, sectored cache, 64 byte line size */ + { 0x7b, LVL_2, 512 }, /* 8-way set assoc, sectored cache, 64 byte line size */ + { 0x7c, LVL_2, 1024 }, /* 8-way set assoc, sectored cache, 64 byte line size */ + { 0x7d, LVL_2, 2048 }, /* 8-way set assoc, 64 byte line size */ + { 0x7f, LVL_2, 512 }, /* 2-way set assoc, 64 byte line size */ + { 0x82, LVL_2, 256 }, /* 8-way set assoc, 32 byte line size */ + { 0x83, LVL_2, 512 }, /* 8-way set assoc, 32 byte line size */ + { 0x84, LVL_2, 1024 }, /* 8-way set assoc, 32 byte line size */ + { 0x85, LVL_2, 2048 }, /* 8-way set assoc, 32 byte line size */ + { 0x86, LVL_2, 512 }, /* 4-way set assoc, 64 byte line size */ + { 0x87, LVL_2, 1024 }, /* 8-way set assoc, 64 byte line size */ + { 0x00, 0, 0} +}; + + +enum _cache_type +{ + CACHE_TYPE_NULL = 0, + CACHE_TYPE_DATA = 1, + CACHE_TYPE_INST = 2, + CACHE_TYPE_UNIFIED = 3 +}; + +union _cpuid4_leaf_eax { + struct { + enum _cache_type type:5; + unsigned int level:3; + unsigned int is_self_initializing:1; + unsigned int is_fully_associative:1; + unsigned int reserved:4; + unsigned int num_threads_sharing:12; + unsigned int num_cores_on_die:6; + } split; + u32 full; +}; + +union _cpuid4_leaf_ebx { + struct { + unsigned int coherency_line_size:12; + unsigned int physical_line_partition:10; + unsigned int ways_of_associativity:10; + } split; + u32 full; +}; + +union _cpuid4_leaf_ecx { + struct { + unsigned int number_of_sets:32; + } split; + u32 full; +}; + +struct _cpuid4_info { + union _cpuid4_leaf_eax eax; + union _cpuid4_leaf_ebx ebx; + union _cpuid4_leaf_ecx ecx; + unsigned long size; + cpumask_t shared_cpu_map; +}; + +unsigned short num_cache_leaves; + +/* AMD doesn't have CPUID4. Emulate it here to report the same + information to the user. This makes some assumptions about the machine: + L2 not shared, no SMT etc. that is currently true on AMD CPUs. + + In theory the TLBs could be reported as fake type (they are in "dummy"). + Maybe later */ +union l1_cache { + struct { + unsigned line_size : 8; + unsigned lines_per_tag : 8; + unsigned assoc : 8; + unsigned size_in_kb : 8; + }; + unsigned val; +}; + +union l2_cache { + struct { + unsigned line_size : 8; + unsigned lines_per_tag : 4; + unsigned assoc : 4; + unsigned size_in_kb : 16; + }; + unsigned val; +}; + +union l3_cache { + struct { + unsigned line_size : 8; + unsigned lines_per_tag : 4; + unsigned assoc : 4; + unsigned res : 2; + unsigned size_encoded : 14; + }; + unsigned val; +}; + +static const unsigned short assocs[] = { + [1] = 1, [2] = 2, [4] = 4, [6] = 8, + [8] = 16, [0xa] = 32, [0xb] = 48, + [0xc] = 64, + [0xf] = 0xffff // ?? +}; + +static const unsigned char levels[] = { 1, 1, 2, 3 }; +static const unsigned char types[] = { 1, 2, 3, 3 }; + +static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, + union _cpuid4_leaf_ebx *ebx, + union _cpuid4_leaf_ecx *ecx) +{ + unsigned dummy; + unsigned line_size, lines_per_tag, assoc, size_in_kb; + union l1_cache l1i, l1d; + union l2_cache l2; + union l3_cache l3; + union l1_cache *l1 = &l1d; + + eax->full = 0; + ebx->full = 0; + ecx->full = 0; + + cpuid(0x80000005, &dummy, &dummy, &l1d.val, &l1i.val); + cpuid(0x80000006, &dummy, &dummy, &l2.val, &l3.val); + + switch (leaf) { + case 1: + l1 = &l1i; + case 0: + if (!l1->val) + return; + assoc = l1->assoc; + line_size = l1->line_size; + lines_per_tag = l1->lines_per_tag; + size_in_kb = l1->size_in_kb; + break; + case 2: + if (!l2.val) + return; + assoc = l2.assoc; + line_size = l2.line_size; + lines_per_tag = l2.lines_per_tag; + /* cpu_data has errata corrections for K7 applied */ + size_in_kb = current_cpu_data.x86_cache_size; + break; + case 3: + if (!l3.val) + return; + assoc = l3.assoc; + line_size = l3.line_size; + lines_per_tag = l3.lines_per_tag; + size_in_kb = l3.size_encoded * 512; + break; + default: + return; + } + + eax->split.is_self_initializing = 1; + eax->split.type = types[leaf]; + eax->split.level = levels[leaf]; + if (leaf == 3) + eax->split.num_threads_sharing = current_cpu_data.x86_max_cores - 1; + else + eax->split.num_threads_sharing = 0; + eax->split.num_cores_on_die = current_cpu_data.x86_max_cores - 1; + + + if (assoc == 0xf) + eax->split.is_fully_associative = 1; + ebx->split.coherency_line_size = line_size - 1; + ebx->split.ways_of_associativity = assocs[assoc] - 1; + ebx->split.physical_line_partition = lines_per_tag - 1; + ecx->split.number_of_sets = (size_in_kb * 1024) / line_size / + (ebx->split.ways_of_associativity + 1) - 1; +} + +static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) +{ + union _cpuid4_leaf_eax eax; + union _cpuid4_leaf_ebx ebx; + union _cpuid4_leaf_ecx ecx; + unsigned edx; + + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) + amd_cpuid4(index, &eax, &ebx, &ecx); + else + cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx); + if (eax.split.type == CACHE_TYPE_NULL) + return -EIO; /* better error ? */ + + this_leaf->eax = eax; + this_leaf->ebx = ebx; + this_leaf->ecx = ecx; + this_leaf->size = (ecx.split.number_of_sets + 1) * + (ebx.split.coherency_line_size + 1) * + (ebx.split.physical_line_partition + 1) * + (ebx.split.ways_of_associativity + 1); + return 0; +} + +static int __cpuinit find_num_cache_leaves(void) +{ + unsigned int eax, ebx, ecx, edx; + union _cpuid4_leaf_eax cache_eax; + int i = -1; + + do { + ++i; + /* Do cpuid(4) loop to find out num_cache_leaves */ + cpuid_count(4, i, &eax, &ebx, &ecx, &edx); + cache_eax.full = eax; + } while (cache_eax.split.type != CACHE_TYPE_NULL); + return i; +} + +unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) +{ + unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */ + unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */ + unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */ + unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb; +#ifdef CONFIG_X86_HT + unsigned int cpu = (c == &boot_cpu_data) ? 0 : (c - cpu_data); +#endif + + if (c->cpuid_level > 3) { + static int is_initialized; + + if (is_initialized == 0) { + /* Init num_cache_leaves from boot CPU */ + num_cache_leaves = find_num_cache_leaves(); + is_initialized++; + } + + /* + * Whenever possible use cpuid(4), deterministic cache + * parameters cpuid leaf to find the cache details + */ + for (i = 0; i < num_cache_leaves; i++) { + struct _cpuid4_info this_leaf; + + int retval; + + retval = cpuid4_cache_lookup(i, &this_leaf); + if (retval >= 0) { + switch(this_leaf.eax.split.level) { + case 1: + if (this_leaf.eax.split.type == + CACHE_TYPE_DATA) + new_l1d = this_leaf.size/1024; + else if (this_leaf.eax.split.type == + CACHE_TYPE_INST) + new_l1i = this_leaf.size/1024; + break; + case 2: + new_l2 = this_leaf.size/1024; + num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing; + index_msb = get_count_order(num_threads_sharing); + l2_id = c->apicid >> index_msb; + break; + case 3: + new_l3 = this_leaf.size/1024; + num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing; + index_msb = get_count_order(num_threads_sharing); + l3_id = c->apicid >> index_msb; + break; + default: + break; + } + } + } + } + /* + * Don't use cpuid2 if cpuid4 is supported. For P4, we use cpuid2 for + * trace cache + */ + if ((num_cache_leaves == 0 || c->x86 == 15) && c->cpuid_level > 1) { + /* supports eax=2 call */ + int i, j, n; + int regs[4]; + unsigned char *dp = (unsigned char *)regs; + int only_trace = 0; + + if (num_cache_leaves != 0 && c->x86 == 15) + only_trace = 1; + + /* Number of times to iterate */ + n = cpuid_eax(2) & 0xFF; + + for ( i = 0 ; i < n ; i++ ) { + cpuid(2, ®s[0], ®s[1], ®s[2], ®s[3]); + + /* If bit 31 is set, this is an unknown format */ + for ( j = 0 ; j < 3 ; j++ ) { + if ( regs[j] < 0 ) regs[j] = 0; + } + + /* Byte 0 is level count, not a descriptor */ + for ( j = 1 ; j < 16 ; j++ ) { + unsigned char des = dp[j]; + unsigned char k = 0; + + /* look up this descriptor in the table */ + while (cache_table[k].descriptor != 0) + { + if (cache_table[k].descriptor == des) { + if (only_trace && cache_table[k].cache_type != LVL_TRACE) + break; + switch (cache_table[k].cache_type) { + case LVL_1_INST: + l1i += cache_table[k].size; + break; + case LVL_1_DATA: + l1d += cache_table[k].size; + break; + case LVL_2: + l2 += cache_table[k].size; + break; + case LVL_3: + l3 += cache_table[k].size; + break; + case LVL_TRACE: + trace += cache_table[k].size; + break; + } + + break; + } + + k++; + } + } + } + } + + if (new_l1d) + l1d = new_l1d; + + if (new_l1i) + l1i = new_l1i; + + if (new_l2) { + l2 = new_l2; +#ifdef CONFIG_X86_HT + cpu_llc_id[cpu] = l2_id; +#endif + } + + if (new_l3) { + l3 = new_l3; +#ifdef CONFIG_X86_HT + cpu_llc_id[cpu] = l3_id; +#endif + } + + if (trace) + printk (KERN_INFO "CPU: Trace cache: %dK uops", trace); + else if ( l1i ) + printk (KERN_INFO "CPU: L1 I cache: %dK", l1i); + + if (l1d) + printk(", L1 D cache: %dK\n", l1d); + else + printk("\n"); + + if (l2) + printk(KERN_INFO "CPU: L2 cache: %dK\n", l2); + + if (l3) + printk(KERN_INFO "CPU: L3 cache: %dK\n", l3); + + c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d)); + + return l2; +} + +/* pointer to _cpuid4_info array (for each cache leaf) */ +static struct _cpuid4_info *cpuid4_info[NR_CPUS]; +#define CPUID4_INFO_IDX(x,y) (&((cpuid4_info[x])[y])) + +#ifdef CONFIG_SMP +static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) +{ + struct _cpuid4_info *this_leaf, *sibling_leaf; + unsigned long num_threads_sharing; + int index_msb, i; + struct cpuinfo_x86 *c = cpu_data; + + this_leaf = CPUID4_INFO_IDX(cpu, index); + num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing; + + if (num_threads_sharing == 1) + cpu_set(cpu, this_leaf->shared_cpu_map); + else { + index_msb = get_count_order(num_threads_sharing); + + for_each_online_cpu(i) { + if (c[i].apicid >> index_msb == + c[cpu].apicid >> index_msb) { + cpu_set(i, this_leaf->shared_cpu_map); + if (i != cpu && cpuid4_info[i]) { + sibling_leaf = CPUID4_INFO_IDX(i, index); + cpu_set(cpu, sibling_leaf->shared_cpu_map); + } + } + } + } +} +static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index) +{ + struct _cpuid4_info *this_leaf, *sibling_leaf; + int sibling; + + this_leaf = CPUID4_INFO_IDX(cpu, index); + for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) { + sibling_leaf = CPUID4_INFO_IDX(sibling, index); + cpu_clear(cpu, sibling_leaf->shared_cpu_map); + } +} +#else +static void __init cache_shared_cpu_map_setup(unsigned int cpu, int index) {} +static void __init cache_remove_shared_cpu_map(unsigned int cpu, int index) {} +#endif + +static void free_cache_attributes(unsigned int cpu) +{ + kfree(cpuid4_info[cpu]); + cpuid4_info[cpu] = NULL; +} + +static int __cpuinit detect_cache_attributes(unsigned int cpu) +{ + struct _cpuid4_info *this_leaf; + unsigned long j; + int retval; + cpumask_t oldmask; + + if (num_cache_leaves == 0) + return -ENOENT; + + cpuid4_info[cpu] = kzalloc( + sizeof(struct _cpuid4_info) * num_cache_leaves, GFP_KERNEL); + if (cpuid4_info[cpu] == NULL) + return -ENOMEM; + + oldmask = current->cpus_allowed; + retval = set_cpus_allowed(current, cpumask_of_cpu(cpu)); + if (retval) + goto out; + + /* Do cpuid and store the results */ + retval = 0; + for (j = 0; j < num_cache_leaves; j++) { + this_leaf = CPUID4_INFO_IDX(cpu, j); + retval = cpuid4_cache_lookup(j, this_leaf); + if (unlikely(retval < 0)) + break; + cache_shared_cpu_map_setup(cpu, j); + } + set_cpus_allowed(current, oldmask); + +out: + if (retval) + free_cache_attributes(cpu); + return retval; +} + +#ifdef CONFIG_SYSFS + +#include <linux/kobject.h> +#include <linux/sysfs.h> + +extern struct sysdev_class cpu_sysdev_class; /* from drivers/base/cpu.c */ + +/* pointer to kobject for cpuX/cache */ +static struct kobject * cache_kobject[NR_CPUS]; + +struct _index_kobject { + struct kobject kobj; + unsigned int cpu; + unsigned short index; +}; + +/* pointer to array of kobjects for cpuX/cache/indexY */ +static struct _index_kobject *index_kobject[NR_CPUS]; +#define INDEX_KOBJECT_PTR(x,y) (&((index_kobject[x])[y])) + +#define show_one_plus(file_name, object, val) \ +static ssize_t show_##file_name \ + (struct _cpuid4_info *this_leaf, char *buf) \ +{ \ + return sprintf (buf, "%lu\n", (unsigned long)this_leaf->object + val); \ +} + +show_one_plus(level, eax.split.level, 0); +show_one_plus(coherency_line_size, ebx.split.coherency_line_size, 1); +show_one_plus(physical_line_partition, ebx.split.physical_line_partition, 1); +show_one_plus(ways_of_associativity, ebx.split.ways_of_associativity, 1); +show_one_plus(number_of_sets, ecx.split.number_of_sets, 1); + +static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf) +{ + return sprintf (buf, "%luK\n", this_leaf->size / 1024); +} + +static ssize_t show_shared_cpu_map(struct _cpuid4_info *this_leaf, char *buf) +{ + char mask_str[NR_CPUS]; + cpumask_scnprintf(mask_str, NR_CPUS, this_leaf->shared_cpu_map); + return sprintf(buf, "%s\n", mask_str); +} + +static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) { + switch(this_leaf->eax.split.type) { + case CACHE_TYPE_DATA: + return sprintf(buf, "Data\n"); + break; + case CACHE_TYPE_INST: + return sprintf(buf, "Instruction\n"); + break; + case CACHE_TYPE_UNIFIED: + return sprintf(buf, "Unified\n"); + break; + default: + return sprintf(buf, "Unknown\n"); + break; + } +} + +struct _cache_attr { + struct attribute attr; + ssize_t (*show)(struct _cpuid4_info *, char *); + ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count); +}; + +#define define_one_ro(_name) \ +static struct _cache_attr _name = \ + __ATTR(_name, 0444, show_##_name, NULL) + +define_one_ro(level); +define_one_ro(type); +define_one_ro(coherency_line_size); +define_one_ro(physical_line_partition); +define_one_ro(ways_of_associativity); +define_one_ro(number_of_sets); +define_one_ro(size); +define_one_ro(shared_cpu_map); + +static struct attribute * default_attrs[] = { + &type.attr, + &level.attr, + &coherency_line_size.attr, + &physical_line_partition.attr, + &ways_of_associativity.attr, + &number_of_sets.attr, + &size.attr, + &shared_cpu_map.attr, + NULL +}; + +#define to_object(k) container_of(k, struct _index_kobject, kobj) +#define to_attr(a) container_of(a, struct _cache_attr, attr) + +static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf) +{ + struct _cache_attr *fattr = to_attr(attr); + struct _index_kobject *this_leaf = to_object(kobj); + ssize_t ret; + + ret = fattr->show ? + fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index), + buf) : + 0; + return ret; +} + +static ssize_t store(struct kobject * kobj, struct attribute * attr, + const char * buf, size_t count) +{ + return 0; +} + +static struct sysfs_ops sysfs_ops = { + .show = show, + .store = store, +}; + +static struct kobj_type ktype_cache = { + .sysfs_ops = &sysfs_ops, + .default_attrs = default_attrs, +}; + +static struct kobj_type ktype_percpu_entry = { + .sysfs_ops = &sysfs_ops, +}; + +static void cpuid4_cache_sysfs_exit(unsigned int cpu) +{ + kfree(cache_kobject[cpu]); + kfree(index_kobject[cpu]); + cache_kobject[cpu] = NULL; + index_kobject[cpu] = NULL; + free_cache_attributes(cpu); +} + +static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu) +{ + + if (num_cache_leaves == 0) + return -ENOENT; + + detect_cache_attributes(cpu); + if (cpuid4_info[cpu] == NULL) + return -ENOENT; + + /* Allocate all required memory */ + cache_kobject[cpu] = kzalloc(sizeof(struct kobject), GFP_KERNEL); + if (unlikely(cache_kobject[cpu] == NULL)) + goto err_out; + + index_kobject[cpu] = kzalloc( + sizeof(struct _index_kobject ) * num_cache_leaves, GFP_KERNEL); + if (unlikely(index_kobject[cpu] == NULL)) + goto err_out; + + return 0; + +err_out: + cpuid4_cache_sysfs_exit(cpu); + return -ENOMEM; +} + +/* Add/Remove cache interface for CPU device */ +static int __cpuinit cache_add_dev(struct sys_device * sys_dev) +{ + unsigned int cpu = sys_dev->id; + unsigned long i, j; + struct _index_kobject *this_object; + int retval = 0; + + retval = cpuid4_cache_sysfs_init(cpu); + if (unlikely(retval < 0)) + return retval; + + cache_kobject[cpu]->parent = &sys_dev->kobj; + kobject_set_name(cache_kobject[cpu], "%s", "cache"); + cache_kobject[cpu]->ktype = &ktype_percpu_entry; + retval = kobject_register(cache_kobject[cpu]); + + for (i = 0; i < num_cache_leaves; i++) { + this_object = INDEX_KOBJECT_PTR(cpu,i); + this_object->cpu = cpu; + this_object->index = i; + this_object->kobj.parent = cache_kobject[cpu]; + kobject_set_name(&(this_object->kobj), "index%1lu", i); + this_object->kobj.ktype = &ktype_cache; + retval = kobject_register(&(this_object->kobj)); + if (unlikely(retval)) { + for (j = 0; j < i; j++) { + kobject_unregister( + &(INDEX_KOBJECT_PTR(cpu,j)->kobj)); + } + kobject_unregister(cache_kobject[cpu]); + cpuid4_cache_sysfs_exit(cpu); + break; + } + } + return retval; +} + +static void __cpuinit cache_remove_dev(struct sys_device * sys_dev) +{ + unsigned int cpu = sys_dev->id; + unsigned long i; + + if (cpuid4_info[cpu] == NULL) + return; + for (i = 0; i < num_cache_leaves; i++) { + cache_remove_shared_cpu_map(cpu, i); + kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj)); + } + kobject_unregister(cache_kobject[cpu]); + cpuid4_cache_sysfs_exit(cpu); + return; +} + +static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct sys_device *sys_dev; + + sys_dev = get_cpu_sysdev(cpu); + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + cache_add_dev(sys_dev); + break; + case CPU_DEAD: + case CPU_DEAD_FROZEN: + cache_remove_dev(sys_dev); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata cacheinfo_cpu_notifier = +{ + .notifier_call = cacheinfo_cpu_callback, +}; + +static int __cpuinit cache_sysfs_init(void) +{ + int i; + + if (num_cache_leaves == 0) + return 0; + + register_hotcpu_notifier(&cacheinfo_cpu_notifier); + + for_each_online_cpu(i) { + cacheinfo_cpu_callback(&cacheinfo_cpu_notifier, CPU_ONLINE, + (void *)(long)i); + } + + return 0; +} + +device_initcall(cache_sysfs_init); + +#endif diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile new file mode 100644 index 000000000000..f1ebe1c1c17a --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/Makefile @@ -0,0 +1,2 @@ +obj-y = mce.o k7.o p4.o p5.o p6.o winchip.o therm_throt.o +obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c new file mode 100644 index 000000000000..eef63e3630c2 --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/k7.c @@ -0,0 +1,102 @@ +/* + * Athlon/Hammer specific Machine Check Exception Reporting + * (C) Copyright 2002 Dave Jones <davej@codemonkey.org.uk> + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/smp.h> + +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/msr.h> + +#include "mce.h" + +/* Machine Check Handler For AMD Athlon/Duron */ +static fastcall void k7_machine_check(struct pt_regs * regs, long error_code) +{ + int recover=1; + u32 alow, ahigh, high, low; + u32 mcgstl, mcgsth; + int i; + + rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + if (mcgstl & (1<<0)) /* Recoverable ? */ + recover=0; + + printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", + smp_processor_id(), mcgsth, mcgstl); + + for (i=1; i<nr_mce_banks; i++) { + rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high); + if (high&(1<<31)) { + if (high & (1<<29)) + recover |= 1; + if (high & (1<<25)) + recover |= 2; + printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low); + high &= ~(1<<31); + if (high & (1<<27)) { + rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh); + printk ("[%08x%08x]", ahigh, alow); + } + if (high & (1<<26)) { + rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh); + printk (" at %08x%08x", ahigh, alow); + } + printk ("\n"); + /* Clear it */ + wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL); + /* Serialize */ + wmb(); + add_taint(TAINT_MACHINE_CHECK); + } + } + + if (recover&2) + panic ("CPU context corrupt"); + if (recover&1) + panic ("Unable to continue"); + printk (KERN_EMERG "Attempting to continue.\n"); + mcgstl &= ~(1<<2); + wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); +} + + +/* AMD K7 machine check is Intel like */ +void amd_mcheck_init(struct cpuinfo_x86 *c) +{ + u32 l, h; + int i; + + if (!cpu_has(c, X86_FEATURE_MCE)) + return; + + machine_check_vector = k7_machine_check; + wmb(); + + printk (KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr (MSR_IA32_MCG_CAP, l, h); + if (l & (1<<8)) /* Control register present ? */ + wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + nr_mce_banks = l & 0xff; + + /* Clear status for MC index 0 separately, we don't touch CTL, + * as some K7 Athlons cause spurious MCEs when its enabled. */ + if (boot_cpu_data.x86 == 6) { + wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0); + i = 1; + } else + i = 0; + for (; i<nr_mce_banks; i++) { + wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + } + + set_in_cr4 (X86_CR4_MCE); + printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + smp_processor_id()); +} diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c new file mode 100644 index 000000000000..34c781eddee4 --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -0,0 +1,90 @@ +/* + * mce.c - x86 Machine Check Exception Reporting + * (c) 2002 Alan Cox <alan@redhat.com>, Dave Jones <davej@codemonkey.org.uk> + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/smp.h> +#include <linux/thread_info.h> + +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/mce.h> + +#include "mce.h" + +int mce_disabled = 0; +int nr_mce_banks; + +EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */ + +/* Handle unconfigured int18 (should never happen) */ +static fastcall void unexpected_machine_check(struct pt_regs * regs, long error_code) +{ + printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id()); +} + +/* Call the installed machine check handler for this CPU setup. */ +void fastcall (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_machine_check; + +/* This has to be run for each processor */ +void mcheck_init(struct cpuinfo_x86 *c) +{ + if (mce_disabled==1) + return; + + switch (c->x86_vendor) { + case X86_VENDOR_AMD: + amd_mcheck_init(c); + break; + + case X86_VENDOR_INTEL: + if (c->x86==5) + intel_p5_mcheck_init(c); + if (c->x86==6) + intel_p6_mcheck_init(c); + if (c->x86==15) + intel_p4_mcheck_init(c); + break; + + case X86_VENDOR_CENTAUR: + if (c->x86==5) + winchip_mcheck_init(c); + break; + + default: + break; + } +} + +static unsigned long old_cr4 __initdata; + +void __init stop_mce(void) +{ + old_cr4 = read_cr4(); + clear_in_cr4(X86_CR4_MCE); +} + +void __init restart_mce(void) +{ + if (old_cr4 & X86_CR4_MCE) + set_in_cr4(X86_CR4_MCE); +} + +static int __init mcheck_disable(char *str) +{ + mce_disabled = 1; + return 1; +} + +static int __init mcheck_enable(char *str) +{ + mce_disabled = -1; + return 1; +} + +__setup("nomce", mcheck_disable); +__setup("mce", mcheck_enable); diff --git a/arch/x86/kernel/cpu/mcheck/mce.h b/arch/x86/kernel/cpu/mcheck/mce.h new file mode 100644 index 000000000000..81fb6e2d35f3 --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/mce.h @@ -0,0 +1,14 @@ +#include <linux/init.h> +#include <asm/mce.h> + +void amd_mcheck_init(struct cpuinfo_x86 *c); +void intel_p4_mcheck_init(struct cpuinfo_x86 *c); +void intel_p5_mcheck_init(struct cpuinfo_x86 *c); +void intel_p6_mcheck_init(struct cpuinfo_x86 *c); +void winchip_mcheck_init(struct cpuinfo_x86 *c); + +/* Call the installed machine check handler for this CPU setup. */ +extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code); + +extern int nr_mce_banks; + diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c new file mode 100644 index 000000000000..bf39409b3838 --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c @@ -0,0 +1,91 @@ +/* + * Non Fatal Machine Check Exception Reporting + * + * (C) Copyright 2002 Dave Jones. <davej@codemonkey.org.uk> + * + * This file contains routines to check for non-fatal MCEs every 15s + * + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> +#include <linux/smp.h> +#include <linux/module.h> + +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/msr.h> + +#include "mce.h" + +static int firstbank; + +#define MCE_RATE 15*HZ /* timer rate is 15s */ + +static void mce_checkregs (void *info) +{ + u32 low, high; + int i; + + for (i=firstbank; i<nr_mce_banks; i++) { + rdmsr (MSR_IA32_MC0_STATUS+i*4, low, high); + + if (high & (1<<31)) { + printk(KERN_INFO "MCE: The hardware reports a non " + "fatal, correctable incident occurred on " + "CPU %d.\n", + smp_processor_id()); + printk (KERN_INFO "Bank %d: %08x%08x\n", i, high, low); + + /* Scrub the error so we don't pick it up in MCE_RATE seconds time. */ + wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL); + + /* Serialize */ + wmb(); + add_taint(TAINT_MACHINE_CHECK); + } + } +} + +static void mce_work_fn(struct work_struct *work); +static DECLARE_DELAYED_WORK(mce_work, mce_work_fn); + +static void mce_work_fn(struct work_struct *work) +{ + on_each_cpu(mce_checkregs, NULL, 1, 1); + schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE)); +} + +static int __init init_nonfatal_mce_checker(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + + /* Check for MCE support */ + if (!cpu_has(c, X86_FEATURE_MCE)) + return -ENODEV; + + /* Check for PPro style MCA */ + if (!cpu_has(c, X86_FEATURE_MCA)) + return -ENODEV; + + /* Some Athlons misbehave when we frob bank 0 */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + boot_cpu_data.x86 == 6) + firstbank = 1; + else + firstbank = 0; + + /* + * Check for non-fatal errors every MCE_RATE s + */ + schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE)); + printk(KERN_INFO "Machine check exception polling timer started.\n"); + return 0; +} +module_init(init_nonfatal_mce_checker); + +MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c new file mode 100644 index 000000000000..1509edfb2313 --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/p4.c @@ -0,0 +1,253 @@ +/* + * P4 specific Machine Check Exception Reporting + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/smp.h> + +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/msr.h> +#include <asm/apic.h> + +#include <asm/therm_throt.h> + +#include "mce.h" + +/* as supported by the P4/Xeon family */ +struct intel_mce_extended_msrs { + u32 eax; + u32 ebx; + u32 ecx; + u32 edx; + u32 esi; + u32 edi; + u32 ebp; + u32 esp; + u32 eflags; + u32 eip; + /* u32 *reserved[]; */ +}; + +static int mce_num_extended_msrs = 0; + + +#ifdef CONFIG_X86_MCE_P4THERMAL +static void unexpected_thermal_interrupt(struct pt_regs *regs) +{ + printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", + smp_processor_id()); + add_taint(TAINT_MACHINE_CHECK); +} + +/* P4/Xeon Thermal transition interrupt handler */ +static void intel_thermal_interrupt(struct pt_regs *regs) +{ + __u64 msr_val; + + ack_APIC_irq(); + + rdmsrl(MSR_IA32_THERM_STATUS, msr_val); + therm_throt_process(msr_val & 0x1); +} + +/* Thermal interrupt handler for this CPU setup */ +static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_thermal_interrupt; + +fastcall void smp_thermal_interrupt(struct pt_regs *regs) +{ + irq_enter(); + vendor_thermal_interrupt(regs); + irq_exit(); +} + +/* P4/Xeon Thermal regulation detect and init */ +static void intel_init_thermal(struct cpuinfo_x86 *c) +{ + u32 l, h; + unsigned int cpu = smp_processor_id(); + + /* Thermal monitoring */ + if (!cpu_has(c, X86_FEATURE_ACPI)) + return; /* -ENODEV */ + + /* Clock modulation */ + if (!cpu_has(c, X86_FEATURE_ACC)) + return; /* -ENODEV */ + + /* first check if its enabled already, in which case there might + * be some SMM goo which handles it, so we can't even put a handler + * since it might be delivered via SMI already -zwanem. + */ + rdmsr (MSR_IA32_MISC_ENABLE, l, h); + h = apic_read(APIC_LVTTHMR); + if ((l & (1<<3)) && (h & APIC_DM_SMI)) { + printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n", + cpu); + return; /* -EBUSY */ + } + + /* check whether a vector already exists, temporarily masked? */ + if (h & APIC_VECTOR_MASK) { + printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already " + "installed\n", + cpu, (h & APIC_VECTOR_MASK)); + return; /* -EBUSY */ + } + + /* The temperature transition interrupt handler setup */ + h = THERMAL_APIC_VECTOR; /* our delivery vector */ + h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */ + apic_write_around(APIC_LVTTHMR, h); + + rdmsr (MSR_IA32_THERM_INTERRUPT, l, h); + wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h); + + /* ok we're good to go... */ + vendor_thermal_interrupt = intel_thermal_interrupt; + + rdmsr (MSR_IA32_MISC_ENABLE, l, h); + wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h); + + l = apic_read (APIC_LVTTHMR); + apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED); + printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu); + + /* enable thermal throttle processing */ + atomic_set(&therm_throt_en, 1); + return; +} +#endif /* CONFIG_X86_MCE_P4THERMAL */ + + +/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */ +static inline void intel_get_extended_msrs(struct intel_mce_extended_msrs *r) +{ + u32 h; + + rdmsr (MSR_IA32_MCG_EAX, r->eax, h); + rdmsr (MSR_IA32_MCG_EBX, r->ebx, h); + rdmsr (MSR_IA32_MCG_ECX, r->ecx, h); + rdmsr (MSR_IA32_MCG_EDX, r->edx, h); + rdmsr (MSR_IA32_MCG_ESI, r->esi, h); + rdmsr (MSR_IA32_MCG_EDI, r->edi, h); + rdmsr (MSR_IA32_MCG_EBP, r->ebp, h); + rdmsr (MSR_IA32_MCG_ESP, r->esp, h); + rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h); + rdmsr (MSR_IA32_MCG_EIP, r->eip, h); +} + +static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) +{ + int recover=1; + u32 alow, ahigh, high, low; + u32 mcgstl, mcgsth; + int i; + + rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + if (mcgstl & (1<<0)) /* Recoverable ? */ + recover=0; + + printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", + smp_processor_id(), mcgsth, mcgstl); + + if (mce_num_extended_msrs > 0) { + struct intel_mce_extended_msrs dbg; + intel_get_extended_msrs(&dbg); + printk (KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n", + smp_processor_id(), dbg.eip, dbg.eflags); + printk (KERN_DEBUG "\teax: %08x ebx: %08x ecx: %08x edx: %08x\n", + dbg.eax, dbg.ebx, dbg.ecx, dbg.edx); + printk (KERN_DEBUG "\tesi: %08x edi: %08x ebp: %08x esp: %08x\n", + dbg.esi, dbg.edi, dbg.ebp, dbg.esp); + } + + for (i=0; i<nr_mce_banks; i++) { + rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high); + if (high & (1<<31)) { + if (high & (1<<29)) + recover |= 1; + if (high & (1<<25)) + recover |= 2; + printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low); + high &= ~(1<<31); + if (high & (1<<27)) { + rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh); + printk ("[%08x%08x]", ahigh, alow); + } + if (high & (1<<26)) { + rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh); + printk (" at %08x%08x", ahigh, alow); + } + printk ("\n"); + } + } + + if (recover & 2) + panic ("CPU context corrupt"); + if (recover & 1) + panic ("Unable to continue"); + + printk(KERN_EMERG "Attempting to continue.\n"); + /* + * Do not clear the MSR_IA32_MCi_STATUS if the error is not + * recoverable/continuable.This will allow BIOS to look at the MSRs + * for errors if the OS could not log the error. + */ + for (i=0; i<nr_mce_banks; i++) { + u32 msr; + msr = MSR_IA32_MC0_STATUS+i*4; + rdmsr (msr, low, high); + if (high&(1<<31)) { + /* Clear it */ + wrmsr(msr, 0UL, 0UL); + /* Serialize */ + wmb(); + add_taint(TAINT_MACHINE_CHECK); + } + } + mcgstl &= ~(1<<2); + wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); +} + + +void intel_p4_mcheck_init(struct cpuinfo_x86 *c) +{ + u32 l, h; + int i; + + machine_check_vector = intel_machine_check; + wmb(); + + printk (KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr (MSR_IA32_MCG_CAP, l, h); + if (l & (1<<8)) /* Control register present ? */ + wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + nr_mce_banks = l & 0xff; + + for (i=0; i<nr_mce_banks; i++) { + wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + } + + set_in_cr4 (X86_CR4_MCE); + printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + smp_processor_id()); + + /* Check for P4/Xeon extended MCE MSRs */ + rdmsr (MSR_IA32_MCG_CAP, l, h); + if (l & (1<<9)) {/* MCG_EXT_P */ + mce_num_extended_msrs = (l >> 16) & 0xff; + printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)" + " available\n", + smp_processor_id(), mce_num_extended_msrs); + +#ifdef CONFIG_X86_MCE_P4THERMAL + /* Check for P4/Xeon Thermal monitor */ + intel_init_thermal(c); +#endif + } +} diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c new file mode 100644 index 000000000000..94bc43d950cf --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/p5.c @@ -0,0 +1,53 @@ +/* + * P5 specific Machine Check Exception Reporting + * (C) Copyright 2002 Alan Cox <alan@redhat.com> + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/smp.h> + +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/msr.h> + +#include "mce.h" + +/* Machine check handler for Pentium class Intel */ +static fastcall void pentium_machine_check(struct pt_regs * regs, long error_code) +{ + u32 loaddr, hi, lotype; + rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi); + rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi); + printk(KERN_EMERG "CPU#%d: Machine Check Exception: 0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype); + if(lotype&(1<<5)) + printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id()); + add_taint(TAINT_MACHINE_CHECK); +} + +/* Set up machine check reporting for processors with Intel style MCE */ +void intel_p5_mcheck_init(struct cpuinfo_x86 *c) +{ + u32 l, h; + + /*Check for MCE support */ + if( !cpu_has(c, X86_FEATURE_MCE) ) + return; + + /* Default P5 to off as its often misconnected */ + if(mce_disabled != -1) + return; + machine_check_vector = pentium_machine_check; + wmb(); + + /* Read registers before enabling */ + rdmsr(MSR_IA32_P5_MC_ADDR, l, h); + rdmsr(MSR_IA32_P5_MC_TYPE, l, h); + printk(KERN_INFO "Intel old style machine check architecture supported.\n"); + + /* Enable MCE */ + set_in_cr4(X86_CR4_MCE); + printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id()); +} diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c new file mode 100644 index 000000000000..deeae42ce199 --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/p6.c @@ -0,0 +1,119 @@ +/* + * P6 specific Machine Check Exception Reporting + * (C) Copyright 2002 Alan Cox <alan@redhat.com> + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/smp.h> + +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/msr.h> + +#include "mce.h" + +/* Machine Check Handler For PII/PIII */ +static fastcall void intel_machine_check(struct pt_regs * regs, long error_code) +{ + int recover=1; + u32 alow, ahigh, high, low; + u32 mcgstl, mcgsth; + int i; + + rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth); + if (mcgstl & (1<<0)) /* Recoverable ? */ + recover=0; + + printk (KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n", + smp_processor_id(), mcgsth, mcgstl); + + for (i=0; i<nr_mce_banks; i++) { + rdmsr (MSR_IA32_MC0_STATUS+i*4,low, high); + if (high & (1<<31)) { + if (high & (1<<29)) + recover |= 1; + if (high & (1<<25)) + recover |= 2; + printk (KERN_EMERG "Bank %d: %08x%08x", i, high, low); + high &= ~(1<<31); + if (high & (1<<27)) { + rdmsr (MSR_IA32_MC0_MISC+i*4, alow, ahigh); + printk ("[%08x%08x]", ahigh, alow); + } + if (high & (1<<26)) { + rdmsr (MSR_IA32_MC0_ADDR+i*4, alow, ahigh); + printk (" at %08x%08x", ahigh, alow); + } + printk ("\n"); + } + } + + if (recover & 2) + panic ("CPU context corrupt"); + if (recover & 1) + panic ("Unable to continue"); + + printk (KERN_EMERG "Attempting to continue.\n"); + /* + * Do not clear the MSR_IA32_MCi_STATUS if the error is not + * recoverable/continuable.This will allow BIOS to look at the MSRs + * for errors if the OS could not log the error. + */ + for (i=0; i<nr_mce_banks; i++) { + unsigned int msr; + msr = MSR_IA32_MC0_STATUS+i*4; + rdmsr (msr,low, high); + if (high & (1<<31)) { + /* Clear it */ + wrmsr (msr, 0UL, 0UL); + /* Serialize */ + wmb(); + add_taint(TAINT_MACHINE_CHECK); + } + } + mcgstl &= ~(1<<2); + wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth); +} + +/* Set up machine check reporting for processors with Intel style MCE */ +void intel_p6_mcheck_init(struct cpuinfo_x86 *c) +{ + u32 l, h; + int i; + + /* Check for MCE support */ + if (!cpu_has(c, X86_FEATURE_MCE)) + return; + + /* Check for PPro style MCA */ + if (!cpu_has(c, X86_FEATURE_MCA)) + return; + + /* Ok machine check is available */ + machine_check_vector = intel_machine_check; + wmb(); + + printk (KERN_INFO "Intel machine check architecture supported.\n"); + rdmsr (MSR_IA32_MCG_CAP, l, h); + if (l & (1<<8)) /* Control register present ? */ + wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + nr_mce_banks = l & 0xff; + + /* + * Following the example in IA-32 SDM Vol 3: + * - MC0_CTL should not be written + * - Status registers on all banks should be cleared on reset + */ + for (i=1; i<nr_mce_banks; i++) + wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff); + + for (i=0; i<nr_mce_banks; i++) + wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0); + + set_in_cr4 (X86_CR4_MCE); + printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n", + smp_processor_id()); +} diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c new file mode 100644 index 000000000000..1203dc5ab87a --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -0,0 +1,186 @@ +/* + * linux/arch/i386/kernel/cpu/mcheck/therm_throt.c + * + * Thermal throttle event support code (such as syslog messaging and rate + * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c). + * This allows consistent reporting of CPU thermal throttle events. + * + * Maintains a counter in /sys that keeps track of the number of thermal + * events, such that the user knows how bad the thermal problem might be + * (since the logging to syslog and mcelog is rate limited). + * + * Author: Dmitriy Zavin (dmitriyz@google.com) + * + * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c. + * Inspired by Ross Biro's and Al Borchers' counter code. + */ + +#include <linux/percpu.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> +#include <asm/cpu.h> +#include <linux/notifier.h> +#include <linux/jiffies.h> +#include <asm/therm_throt.h> + +/* How long to wait between reporting thermal events */ +#define CHECK_INTERVAL (300 * HZ) + +static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES; +static DEFINE_PER_CPU(unsigned long, thermal_throttle_count); +atomic_t therm_throt_en = ATOMIC_INIT(0); + +#ifdef CONFIG_SYSFS +#define define_therm_throt_sysdev_one_ro(_name) \ + static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL) + +#define define_therm_throt_sysdev_show_func(name) \ +static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev, \ + char *buf) \ +{ \ + unsigned int cpu = dev->id; \ + ssize_t ret; \ + \ + preempt_disable(); /* CPU hotplug */ \ + if (cpu_online(cpu)) \ + ret = sprintf(buf, "%lu\n", \ + per_cpu(thermal_throttle_##name, cpu)); \ + else \ + ret = 0; \ + preempt_enable(); \ + \ + return ret; \ +} + +define_therm_throt_sysdev_show_func(count); +define_therm_throt_sysdev_one_ro(count); + +static struct attribute *thermal_throttle_attrs[] = { + &attr_count.attr, + NULL +}; + +static struct attribute_group thermal_throttle_attr_group = { + .attrs = thermal_throttle_attrs, + .name = "thermal_throttle" +}; +#endif /* CONFIG_SYSFS */ + +/*** + * therm_throt_process - Process thermal throttling event from interrupt + * @curr: Whether the condition is current or not (boolean), since the + * thermal interrupt normally gets called both when the thermal + * event begins and once the event has ended. + * + * This function is called by the thermal interrupt after the + * IRQ has been acknowledged. + * + * It will take care of rate limiting and printing messages to the syslog. + * + * Returns: 0 : Event should NOT be further logged, i.e. still in + * "timeout" from previous log message. + * 1 : Event should be logged further, and a message has been + * printed to the syslog. + */ +int therm_throt_process(int curr) +{ + unsigned int cpu = smp_processor_id(); + __u64 tmp_jiffs = get_jiffies_64(); + + if (curr) + __get_cpu_var(thermal_throttle_count)++; + + if (time_before64(tmp_jiffs, __get_cpu_var(next_check))) + return 0; + + __get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL; + + /* if we just entered the thermal event */ + if (curr) { + printk(KERN_CRIT "CPU%d: Temperature above threshold, " + "cpu clock throttled (total events = %lu)\n", cpu, + __get_cpu_var(thermal_throttle_count)); + + add_taint(TAINT_MACHINE_CHECK); + } else { + printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu); + } + + return 1; +} + +#ifdef CONFIG_SYSFS +/* Add/Remove thermal_throttle interface for CPU device */ +static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev) +{ + return sysfs_create_group(&sys_dev->kobj, &thermal_throttle_attr_group); +} + +static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev) +{ + return sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group); +} + +/* Mutex protecting device creation against CPU hotplug */ +static DEFINE_MUTEX(therm_cpu_lock); + +/* Get notified when a cpu comes on/off. Be hotplug friendly. */ +static __cpuinit int thermal_throttle_cpu_callback(struct notifier_block *nfb, + unsigned long action, + void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct sys_device *sys_dev; + int err; + + sys_dev = get_cpu_sysdev(cpu); + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + mutex_lock(&therm_cpu_lock); + err = thermal_throttle_add_dev(sys_dev); + mutex_unlock(&therm_cpu_lock); + WARN_ON(err); + break; + case CPU_DEAD: + case CPU_DEAD_FROZEN: + mutex_lock(&therm_cpu_lock); + thermal_throttle_remove_dev(sys_dev); + mutex_unlock(&therm_cpu_lock); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block thermal_throttle_cpu_notifier = +{ + .notifier_call = thermal_throttle_cpu_callback, +}; + +static __init int thermal_throttle_init_device(void) +{ + unsigned int cpu = 0; + int err; + + if (!atomic_read(&therm_throt_en)) + return 0; + + register_hotcpu_notifier(&thermal_throttle_cpu_notifier); + +#ifdef CONFIG_HOTPLUG_CPU + mutex_lock(&therm_cpu_lock); +#endif + /* connect live CPUs to sysfs */ + for_each_online_cpu(cpu) { + err = thermal_throttle_add_dev(get_cpu_sysdev(cpu)); + WARN_ON(err); + } +#ifdef CONFIG_HOTPLUG_CPU + mutex_unlock(&therm_cpu_lock); +#endif + + return 0; +} + +device_initcall(thermal_throttle_init_device); +#endif /* CONFIG_SYSFS */ diff --git a/arch/x86/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c new file mode 100644 index 000000000000..9e424b6c293d --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/winchip.c @@ -0,0 +1,36 @@ +/* + * IDT Winchip specific Machine Check Exception Reporting + * (C) Copyright 2002 Alan Cox <alan@redhat.com> + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> + +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/msr.h> + +#include "mce.h" + +/* Machine check handler for WinChip C6 */ +static fastcall void winchip_machine_check(struct pt_regs * regs, long error_code) +{ + printk(KERN_EMERG "CPU0: Machine Check Exception.\n"); + add_taint(TAINT_MACHINE_CHECK); +} + +/* Set up machine check reporting on the Winchip C6 series */ +void winchip_mcheck_init(struct cpuinfo_x86 *c) +{ + u32 lo, hi; + machine_check_vector = winchip_machine_check; + wmb(); + rdmsr(MSR_IDT_FCR1, lo, hi); + lo|= (1<<2); /* Enable EIERRINT (int 18 MCE) */ + lo&= ~(1<<4); /* Enable MCE */ + wrmsr(MSR_IDT_FCR1, lo, hi); + set_in_cr4(X86_CR4_MCE); + printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n"); +} diff --git a/arch/x86/kernel/cpu/mtrr/Makefile b/arch/x86/kernel/cpu/mtrr/Makefile new file mode 100644 index 000000000000..191fc0533649 --- /dev/null +++ b/arch/x86/kernel/cpu/mtrr/Makefile @@ -0,0 +1,3 @@ +obj-y := main.o if.o generic.o state.o +obj-$(CONFIG_X86_32) += amd.o cyrix.o centaur.o + diff --git a/arch/x86/kernel/cpu/mtrr/amd.c b/arch/x86/kernel/cpu/mtrr/amd.c new file mode 100644 index 000000000000..0949cdbf848a --- /dev/null +++ b/arch/x86/kernel/cpu/mtrr/amd.c @@ -0,0 +1,121 @@ +#include <linux/init.h> +#include <linux/mm.h> +#include <asm/mtrr.h> +#include <asm/msr.h> + +#include "mtrr.h" + +static void +amd_get_mtrr(unsigned int reg, unsigned long *base, + unsigned long *size, mtrr_type * type) +{ + unsigned long low, high; + + rdmsr(MSR_K6_UWCCR, low, high); + /* Upper dword is region 1, lower is region 0 */ + if (reg == 1) + low = high; + /* The base masks off on the right alignment */ + *base = (low & 0xFFFE0000) >> PAGE_SHIFT; + *type = 0; + if (low & 1) + *type = MTRR_TYPE_UNCACHABLE; + if (low & 2) + *type = MTRR_TYPE_WRCOMB; + if (!(low & 3)) { + *size = 0; + return; + } + /* + * This needs a little explaining. The size is stored as an + * inverted mask of bits of 128K granularity 15 bits long offset + * 2 bits + * + * So to get a size we do invert the mask and add 1 to the lowest + * mask bit (4 as its 2 bits in). This gives us a size we then shift + * to turn into 128K blocks + * + * eg 111 1111 1111 1100 is 512K + * + * invert 000 0000 0000 0011 + * +1 000 0000 0000 0100 + * *128K ... + */ + low = (~low) & 0x1FFFC; + *size = (low + 4) << (15 - PAGE_SHIFT); + return; +} + +static void amd_set_mtrr(unsigned int reg, unsigned long base, + unsigned long size, mtrr_type type) +/* [SUMMARY] Set variable MTRR register on the local CPU. + <reg> The register to set. + <base> The base address of the region. + <size> The size of the region. If this is 0 the region is disabled. + <type> The type of the region. + <do_safe> If TRUE, do the change safely. If FALSE, safety measures should + be done externally. + [RETURNS] Nothing. +*/ +{ + u32 regs[2]; + + /* + * Low is MTRR0 , High MTRR 1 + */ + rdmsr(MSR_K6_UWCCR, regs[0], regs[1]); + /* + * Blank to disable + */ + if (size == 0) + regs[reg] = 0; + else + /* Set the register to the base, the type (off by one) and an + inverted bitmask of the size The size is the only odd + bit. We are fed say 512K We invert this and we get 111 1111 + 1111 1011 but if you subtract one and invert you get the + desired 111 1111 1111 1100 mask + + But ~(x - 1) == ~x + 1 == -x. Two's complement rocks! */ + regs[reg] = (-size >> (15 - PAGE_SHIFT) & 0x0001FFFC) + | (base << PAGE_SHIFT) | (type + 1); + + /* + * The writeback rule is quite specific. See the manual. Its + * disable local interrupts, write back the cache, set the mtrr + */ + wbinvd(); + wrmsr(MSR_K6_UWCCR, regs[0], regs[1]); +} + +static int amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type) +{ + /* Apply the K6 block alignment and size rules + In order + o Uncached or gathering only + o 128K or bigger block + o Power of 2 block + o base suitably aligned to the power + */ + if (type > MTRR_TYPE_WRCOMB || size < (1 << (17 - PAGE_SHIFT)) + || (size & ~(size - 1)) - size || (base & (size - 1))) + return -EINVAL; + return 0; +} + +static struct mtrr_ops amd_mtrr_ops = { + .vendor = X86_VENDOR_AMD, + .set = amd_set_mtrr, + .get = amd_get_mtrr, + .get_free_region = generic_get_free_region, + .validate_add_page = amd_validate_add_page, + .have_wrcomb = positive_have_wrcomb, +}; + +int __init amd_init_mtrr(void) +{ + set_mtrr_ops(&amd_mtrr_ops); + return 0; +} + +//arch_initcall(amd_mtrr_init); diff --git a/arch/x86/kernel/cpu/mtrr/centaur.c b/arch/x86/kernel/cpu/mtrr/centaur.c new file mode 100644 index 000000000000..cb9aa3a7a7ab --- /dev/null +++ b/arch/x86/kernel/cpu/mtrr/centaur.c @@ -0,0 +1,224 @@ +#include <linux/init.h> +#include <linux/mm.h> +#include <asm/mtrr.h> +#include <asm/msr.h> +#include "mtrr.h" + +static struct { + unsigned long high; + unsigned long low; +} centaur_mcr[8]; + +static u8 centaur_mcr_reserved; +static u8 centaur_mcr_type; /* 0 for winchip, 1 for winchip2 */ + +/* + * Report boot time MCR setups + */ + +static int +centaur_get_free_region(unsigned long base, unsigned long size, int replace_reg) +/* [SUMMARY] Get a free MTRR. + <base> The starting (base) address of the region. + <size> The size (in bytes) of the region. + [RETURNS] The index of the region on success, else -1 on error. +*/ +{ + int i, max; + mtrr_type ltype; + unsigned long lbase, lsize; + + max = num_var_ranges; + if (replace_reg >= 0 && replace_reg < max) + return replace_reg; + for (i = 0; i < max; ++i) { + if (centaur_mcr_reserved & (1 << i)) + continue; + mtrr_if->get(i, &lbase, &lsize, <ype); + if (lsize == 0) + return i; + } + return -ENOSPC; +} + +void +mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi) +{ + centaur_mcr[mcr].low = lo; + centaur_mcr[mcr].high = hi; +} + +static void +centaur_get_mcr(unsigned int reg, unsigned long *base, + unsigned long *size, mtrr_type * type) +{ + *base = centaur_mcr[reg].high >> PAGE_SHIFT; + *size = -(centaur_mcr[reg].low & 0xfffff000) >> PAGE_SHIFT; + *type = MTRR_TYPE_WRCOMB; /* If it is there, it is write-combining */ + if (centaur_mcr_type == 1 && ((centaur_mcr[reg].low & 31) & 2)) + *type = MTRR_TYPE_UNCACHABLE; + if (centaur_mcr_type == 1 && (centaur_mcr[reg].low & 31) == 25) + *type = MTRR_TYPE_WRBACK; + if (centaur_mcr_type == 0 && (centaur_mcr[reg].low & 31) == 31) + *type = MTRR_TYPE_WRBACK; + +} + +static void centaur_set_mcr(unsigned int reg, unsigned long base, + unsigned long size, mtrr_type type) +{ + unsigned long low, high; + + if (size == 0) { + /* Disable */ + high = low = 0; + } else { + high = base << PAGE_SHIFT; + if (centaur_mcr_type == 0) + low = -size << PAGE_SHIFT | 0x1f; /* only support write-combining... */ + else { + if (type == MTRR_TYPE_UNCACHABLE) + low = -size << PAGE_SHIFT | 0x02; /* NC */ + else + low = -size << PAGE_SHIFT | 0x09; /* WWO,WC */ + } + } + centaur_mcr[reg].high = high; + centaur_mcr[reg].low = low; + wrmsr(MSR_IDT_MCR0 + reg, low, high); +} + +#if 0 +/* + * Initialise the later (saner) Winchip MCR variant. In this version + * the BIOS can pass us the registers it has used (but not their values) + * and the control register is read/write + */ + +static void __init +centaur_mcr1_init(void) +{ + unsigned i; + u32 lo, hi; + + /* Unfortunately, MCR's are read-only, so there is no way to + * find out what the bios might have done. + */ + + rdmsr(MSR_IDT_MCR_CTRL, lo, hi); + if (((lo >> 17) & 7) == 1) { /* Type 1 Winchip2 MCR */ + lo &= ~0x1C0; /* clear key */ + lo |= 0x040; /* set key to 1 */ + wrmsr(MSR_IDT_MCR_CTRL, lo, hi); /* unlock MCR */ + } + + centaur_mcr_type = 1; + + /* + * Clear any unconfigured MCR's. + */ + + for (i = 0; i < 8; ++i) { + if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0) { + if (!(lo & (1 << (9 + i)))) + wrmsr(MSR_IDT_MCR0 + i, 0, 0); + else + /* + * If the BIOS set up an MCR we cannot see it + * but we don't wish to obliterate it + */ + centaur_mcr_reserved |= (1 << i); + } + } + /* + * Throw the main write-combining switch... + * However if OOSTORE is enabled then people have already done far + * cleverer things and we should behave. + */ + + lo |= 15; /* Write combine enables */ + wrmsr(MSR_IDT_MCR_CTRL, lo, hi); +} + +/* + * Initialise the original winchip with read only MCR registers + * no used bitmask for the BIOS to pass on and write only control + */ + +static void __init +centaur_mcr0_init(void) +{ + unsigned i; + + /* Unfortunately, MCR's are read-only, so there is no way to + * find out what the bios might have done. + */ + + /* Clear any unconfigured MCR's. + * This way we are sure that the centaur_mcr array contains the actual + * values. The disadvantage is that any BIOS tweaks are thus undone. + * + */ + for (i = 0; i < 8; ++i) { + if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0) + wrmsr(MSR_IDT_MCR0 + i, 0, 0); + } + + wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0); /* Write only */ +} + +/* + * Initialise Winchip series MCR registers + */ + +static void __init +centaur_mcr_init(void) +{ + struct set_mtrr_context ctxt; + + set_mtrr_prepare_save(&ctxt); + set_mtrr_cache_disable(&ctxt); + + if (boot_cpu_data.x86_model == 4) + centaur_mcr0_init(); + else if (boot_cpu_data.x86_model == 8 || boot_cpu_data.x86_model == 9) + centaur_mcr1_init(); + + set_mtrr_done(&ctxt); +} +#endif + +static int centaur_validate_add_page(unsigned long base, + unsigned long size, unsigned int type) +{ + /* + * FIXME: Winchip2 supports uncached + */ + if (type != MTRR_TYPE_WRCOMB && + (centaur_mcr_type == 0 || type != MTRR_TYPE_UNCACHABLE)) { + printk(KERN_WARNING + "mtrr: only write-combining%s supported\n", + centaur_mcr_type ? " and uncacheable are" + : " is"); + return -EINVAL; + } + return 0; +} + +static struct mtrr_ops centaur_mtrr_ops = { + .vendor = X86_VENDOR_CENTAUR, +// .init = centaur_mcr_init, + .set = centaur_set_mcr, + .get = centaur_get_mcr, + .get_free_region = centaur_get_free_region, + .validate_add_page = centaur_validate_add_page, + .have_wrcomb = positive_have_wrcomb, +}; + +int __init centaur_init_mtrr(void) +{ + set_mtrr_ops(¢aur_mtrr_ops); + return 0; +} + +//arch_initcall(centaur_init_mtrr); diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c new file mode 100644 index 000000000000..2287d4863a8a --- /dev/null +++ b/arch/x86/kernel/cpu/mtrr/cyrix.c @@ -0,0 +1,380 @@ +#include <linux/init.h> +#include <linux/mm.h> +#include <asm/mtrr.h> +#include <asm/msr.h> +#include <asm/io.h> +#include <asm/processor-cyrix.h> +#include "mtrr.h" + +int arr3_protected; + +static void +cyrix_get_arr(unsigned int reg, unsigned long *base, + unsigned long *size, mtrr_type * type) +{ + unsigned long flags; + unsigned char arr, ccr3, rcr, shift; + + arr = CX86_ARR_BASE + (reg << 1) + reg; /* avoid multiplication by 3 */ + + /* Save flags and disable interrupts */ + local_irq_save(flags); + + ccr3 = getCx86(CX86_CCR3); + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + ((unsigned char *) base)[3] = getCx86(arr); + ((unsigned char *) base)[2] = getCx86(arr + 1); + ((unsigned char *) base)[1] = getCx86(arr + 2); + rcr = getCx86(CX86_RCR_BASE + reg); + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ + + /* Enable interrupts if it was enabled previously */ + local_irq_restore(flags); + shift = ((unsigned char *) base)[1] & 0x0f; + *base >>= PAGE_SHIFT; + + /* Power of two, at least 4K on ARR0-ARR6, 256K on ARR7 + * Note: shift==0xf means 4G, this is unsupported. + */ + if (shift) + *size = (reg < 7 ? 0x1UL : 0x40UL) << (shift - 1); + else + *size = 0; + + /* Bit 0 is Cache Enable on ARR7, Cache Disable on ARR0-ARR6 */ + if (reg < 7) { + switch (rcr) { + case 1: + *type = MTRR_TYPE_UNCACHABLE; + break; + case 8: + *type = MTRR_TYPE_WRBACK; + break; + case 9: + *type = MTRR_TYPE_WRCOMB; + break; + case 24: + default: + *type = MTRR_TYPE_WRTHROUGH; + break; + } + } else { + switch (rcr) { + case 0: + *type = MTRR_TYPE_UNCACHABLE; + break; + case 8: + *type = MTRR_TYPE_WRCOMB; + break; + case 9: + *type = MTRR_TYPE_WRBACK; + break; + case 25: + default: + *type = MTRR_TYPE_WRTHROUGH; + break; + } + } +} + +static int +cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg) +/* [SUMMARY] Get a free ARR. + <base> The starting (base) address of the region. + <size> The size (in bytes) of the region. + [RETURNS] The index of the region on success, else -1 on error. +*/ +{ + int i; + mtrr_type ltype; + unsigned long lbase, lsize; + + switch (replace_reg) { + case 7: + if (size < 0x40) + break; + case 6: + case 5: + case 4: + return replace_reg; + case 3: + if (arr3_protected) + break; + case 2: + case 1: + case 0: + return replace_reg; + } + /* If we are to set up a region >32M then look at ARR7 immediately */ + if (size > 0x2000) { + cyrix_get_arr(7, &lbase, &lsize, <ype); + if (lsize == 0) + return 7; + /* Else try ARR0-ARR6 first */ + } else { + for (i = 0; i < 7; i++) { + cyrix_get_arr(i, &lbase, &lsize, <ype); + if ((i == 3) && arr3_protected) + continue; + if (lsize == 0) + return i; + } + /* ARR0-ARR6 isn't free, try ARR7 but its size must be at least 256K */ + cyrix_get_arr(i, &lbase, &lsize, <ype); + if ((lsize == 0) && (size >= 0x40)) + return i; + } + return -ENOSPC; +} + +static u32 cr4 = 0; +static u32 ccr3; + +static void prepare_set(void) +{ + u32 cr0; + + /* Save value of CR4 and clear Page Global Enable (bit 7) */ + if ( cpu_has_pge ) { + cr4 = read_cr4(); + write_cr4(cr4 & ~X86_CR4_PGE); + } + + /* Disable and flush caches. Note that wbinvd flushes the TLBs as + a side-effect */ + cr0 = read_cr0() | 0x40000000; + wbinvd(); + write_cr0(cr0); + wbinvd(); + + /* Cyrix ARRs - everything else were excluded at the top */ + ccr3 = getCx86(CX86_CCR3); + + /* Cyrix ARRs - everything else were excluded at the top */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); + +} + +static void post_set(void) +{ + /* Flush caches and TLBs */ + wbinvd(); + + /* Cyrix ARRs - everything else was excluded at the top */ + setCx86(CX86_CCR3, ccr3); + + /* Enable caches */ + write_cr0(read_cr0() & 0xbfffffff); + + /* Restore value of CR4 */ + if ( cpu_has_pge ) + write_cr4(cr4); +} + +static void cyrix_set_arr(unsigned int reg, unsigned long base, + unsigned long size, mtrr_type type) +{ + unsigned char arr, arr_type, arr_size; + + arr = CX86_ARR_BASE + (reg << 1) + reg; /* avoid multiplication by 3 */ + + /* count down from 32M (ARR0-ARR6) or from 2G (ARR7) */ + if (reg >= 7) + size >>= 6; + + size &= 0x7fff; /* make sure arr_size <= 14 */ + for (arr_size = 0; size; arr_size++, size >>= 1) ; + + if (reg < 7) { + switch (type) { + case MTRR_TYPE_UNCACHABLE: + arr_type = 1; + break; + case MTRR_TYPE_WRCOMB: + arr_type = 9; + break; + case MTRR_TYPE_WRTHROUGH: + arr_type = 24; + break; + default: + arr_type = 8; + break; + } + } else { + switch (type) { + case MTRR_TYPE_UNCACHABLE: + arr_type = 0; + break; + case MTRR_TYPE_WRCOMB: + arr_type = 8; + break; + case MTRR_TYPE_WRTHROUGH: + arr_type = 25; + break; + default: + arr_type = 9; + break; + } + } + + prepare_set(); + + base <<= PAGE_SHIFT; + setCx86(arr, ((unsigned char *) &base)[3]); + setCx86(arr + 1, ((unsigned char *) &base)[2]); + setCx86(arr + 2, (((unsigned char *) &base)[1]) | arr_size); + setCx86(CX86_RCR_BASE + reg, arr_type); + + post_set(); +} + +typedef struct { + unsigned long base; + unsigned long size; + mtrr_type type; +} arr_state_t; + +static arr_state_t arr_state[8] = { + {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, + {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL}, {0UL, 0UL, 0UL} +}; + +static unsigned char ccr_state[7] = { 0, 0, 0, 0, 0, 0, 0 }; + +static void cyrix_set_all(void) +{ + int i; + + prepare_set(); + + /* the CCRs are not contiguous */ + for (i = 0; i < 4; i++) + setCx86(CX86_CCR0 + i, ccr_state[i]); + for (; i < 7; i++) + setCx86(CX86_CCR4 + i, ccr_state[i]); + for (i = 0; i < 8; i++) + cyrix_set_arr(i, arr_state[i].base, + arr_state[i].size, arr_state[i].type); + + post_set(); +} + +#if 0 +/* + * On Cyrix 6x86(MX) and M II the ARR3 is special: it has connection + * with the SMM (System Management Mode) mode. So we need the following: + * Check whether SMI_LOCK (CCR3 bit 0) is set + * if it is set, write a warning message: ARR3 cannot be changed! + * (it cannot be changed until the next processor reset) + * if it is reset, then we can change it, set all the needed bits: + * - disable access to SMM memory through ARR3 range (CCR1 bit 7 reset) + * - disable access to SMM memory (CCR1 bit 2 reset) + * - disable SMM mode (CCR1 bit 1 reset) + * - disable write protection of ARR3 (CCR6 bit 1 reset) + * - (maybe) disable ARR3 + * Just to be sure, we enable ARR usage by the processor (CCR5 bit 5 set) + */ +static void __init +cyrix_arr_init(void) +{ + struct set_mtrr_context ctxt; + unsigned char ccr[7]; + int ccrc[7] = { 0, 0, 0, 0, 0, 0, 0 }; +#ifdef CONFIG_SMP + int i; +#endif + + /* flush cache and enable MAPEN */ + set_mtrr_prepare_save(&ctxt); + set_mtrr_cache_disable(&ctxt); + + /* Save all CCRs locally */ + ccr[0] = getCx86(CX86_CCR0); + ccr[1] = getCx86(CX86_CCR1); + ccr[2] = getCx86(CX86_CCR2); + ccr[3] = ctxt.ccr3; + ccr[4] = getCx86(CX86_CCR4); + ccr[5] = getCx86(CX86_CCR5); + ccr[6] = getCx86(CX86_CCR6); + + if (ccr[3] & 1) { + ccrc[3] = 1; + arr3_protected = 1; + } else { + /* Disable SMM mode (bit 1), access to SMM memory (bit 2) and + * access to SMM memory through ARR3 (bit 7). + */ + if (ccr[1] & 0x80) { + ccr[1] &= 0x7f; + ccrc[1] |= 0x80; + } + if (ccr[1] & 0x04) { + ccr[1] &= 0xfb; + ccrc[1] |= 0x04; + } + if (ccr[1] & 0x02) { + ccr[1] &= 0xfd; + ccrc[1] |= 0x02; + } + arr3_protected = 0; + if (ccr[6] & 0x02) { + ccr[6] &= 0xfd; + ccrc[6] = 1; /* Disable write protection of ARR3 */ + setCx86(CX86_CCR6, ccr[6]); + } + /* Disable ARR3. This is safe now that we disabled SMM. */ + /* cyrix_set_arr_up (3, 0, 0, 0, FALSE); */ + } + /* If we changed CCR1 in memory, change it in the processor, too. */ + if (ccrc[1]) + setCx86(CX86_CCR1, ccr[1]); + + /* Enable ARR usage by the processor */ + if (!(ccr[5] & 0x20)) { + ccr[5] |= 0x20; + ccrc[5] = 1; + setCx86(CX86_CCR5, ccr[5]); + } +#ifdef CONFIG_SMP + for (i = 0; i < 7; i++) + ccr_state[i] = ccr[i]; + for (i = 0; i < 8; i++) + cyrix_get_arr(i, + &arr_state[i].base, &arr_state[i].size, + &arr_state[i].type); +#endif + + set_mtrr_done(&ctxt); /* flush cache and disable MAPEN */ + + if (ccrc[5]) + printk(KERN_INFO "mtrr: ARR usage was not enabled, enabled manually\n"); + if (ccrc[3]) + printk(KERN_INFO "mtrr: ARR3 cannot be changed\n"); +/* + if ( ccrc[1] & 0x80) printk ("mtrr: SMM memory access through ARR3 disabled\n"); + if ( ccrc[1] & 0x04) printk ("mtrr: SMM memory access disabled\n"); + if ( ccrc[1] & 0x02) printk ("mtrr: SMM mode disabled\n"); +*/ + if (ccrc[6]) + printk(KERN_INFO "mtrr: ARR3 was write protected, unprotected\n"); +} +#endif + +static struct mtrr_ops cyrix_mtrr_ops = { + .vendor = X86_VENDOR_CYRIX, +// .init = cyrix_arr_init, + .set_all = cyrix_set_all, + .set = cyrix_set_arr, + .get = cyrix_get_arr, + .get_free_region = cyrix_get_free_region, + .validate_add_page = generic_validate_add_page, + .have_wrcomb = positive_have_wrcomb, +}; + +int __init cyrix_init_mtrr(void) +{ + set_mtrr_ops(&cyrix_mtrr_ops); + return 0; +} + +//arch_initcall(cyrix_init_mtrr); diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c new file mode 100644 index 000000000000..56f64e34829f --- /dev/null +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -0,0 +1,509 @@ +/* This only handles 32bit MTRR on 32bit hosts. This is strictly wrong + because MTRRs can span upto 40 bits (36bits on most modern x86) */ +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/mtrr.h> +#include <asm/msr.h> +#include <asm/system.h> +#include <asm/cpufeature.h> +#include <asm/tlbflush.h> +#include "mtrr.h" + +struct mtrr_state { + struct mtrr_var_range *var_ranges; + mtrr_type fixed_ranges[NUM_FIXED_RANGES]; + unsigned char enabled; + unsigned char have_fixed; + mtrr_type def_type; +}; + +struct fixed_range_block { + int base_msr; /* start address of an MTRR block */ + int ranges; /* number of MTRRs in this block */ +}; + +static struct fixed_range_block fixed_range_blocks[] = { + { MTRRfix64K_00000_MSR, 1 }, /* one 64k MTRR */ + { MTRRfix16K_80000_MSR, 2 }, /* two 16k MTRRs */ + { MTRRfix4K_C0000_MSR, 8 }, /* eight 4k MTRRs */ + {} +}; + +static unsigned long smp_changes_mask; +static struct mtrr_state mtrr_state = {}; + +#undef MODULE_PARAM_PREFIX +#define MODULE_PARAM_PREFIX "mtrr." + +static int mtrr_show; +module_param_named(show, mtrr_show, bool, 0); + +/* Get the MSR pair relating to a var range */ +static void +get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr) +{ + rdmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi); + rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi); +} + +static void +get_fixed_ranges(mtrr_type * frs) +{ + unsigned int *p = (unsigned int *) frs; + int i; + + rdmsr(MTRRfix64K_00000_MSR, p[0], p[1]); + + for (i = 0; i < 2; i++) + rdmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2], p[3 + i * 2]); + for (i = 0; i < 8; i++) + rdmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2], p[7 + i * 2]); +} + +void mtrr_save_fixed_ranges(void *info) +{ + if (cpu_has_mtrr) + get_fixed_ranges(mtrr_state.fixed_ranges); +} + +static void print_fixed(unsigned base, unsigned step, const mtrr_type*types) +{ + unsigned i; + + for (i = 0; i < 8; ++i, ++types, base += step) + printk(KERN_INFO "MTRR %05X-%05X %s\n", + base, base + step - 1, mtrr_attrib_to_str(*types)); +} + +/* Grab all of the MTRR state for this CPU into *state */ +void __init get_mtrr_state(void) +{ + unsigned int i; + struct mtrr_var_range *vrs; + unsigned lo, dummy; + + if (!mtrr_state.var_ranges) { + mtrr_state.var_ranges = kmalloc(num_var_ranges * sizeof (struct mtrr_var_range), + GFP_KERNEL); + if (!mtrr_state.var_ranges) + return; + } + vrs = mtrr_state.var_ranges; + + rdmsr(MTRRcap_MSR, lo, dummy); + mtrr_state.have_fixed = (lo >> 8) & 1; + + for (i = 0; i < num_var_ranges; i++) + get_mtrr_var_range(i, &vrs[i]); + if (mtrr_state.have_fixed) + get_fixed_ranges(mtrr_state.fixed_ranges); + + rdmsr(MTRRdefType_MSR, lo, dummy); + mtrr_state.def_type = (lo & 0xff); + mtrr_state.enabled = (lo & 0xc00) >> 10; + + if (mtrr_show) { + int high_width; + + printk(KERN_INFO "MTRR default type: %s\n", mtrr_attrib_to_str(mtrr_state.def_type)); + if (mtrr_state.have_fixed) { + printk(KERN_INFO "MTRR fixed ranges %sabled:\n", + mtrr_state.enabled & 1 ? "en" : "dis"); + print_fixed(0x00000, 0x10000, mtrr_state.fixed_ranges + 0); + for (i = 0; i < 2; ++i) + print_fixed(0x80000 + i * 0x20000, 0x04000, mtrr_state.fixed_ranges + (i + 1) * 8); + for (i = 0; i < 8; ++i) + print_fixed(0xC0000 + i * 0x08000, 0x01000, mtrr_state.fixed_ranges + (i + 3) * 8); + } + printk(KERN_INFO "MTRR variable ranges %sabled:\n", + mtrr_state.enabled & 2 ? "en" : "dis"); + high_width = ((size_or_mask ? ffs(size_or_mask) - 1 : 32) - (32 - PAGE_SHIFT) + 3) / 4; + for (i = 0; i < num_var_ranges; ++i) { + if (mtrr_state.var_ranges[i].mask_lo & (1 << 11)) + printk(KERN_INFO "MTRR %u base %0*X%05X000 mask %0*X%05X000 %s\n", + i, + high_width, + mtrr_state.var_ranges[i].base_hi, + mtrr_state.var_ranges[i].base_lo >> 12, + high_width, + mtrr_state.var_ranges[i].mask_hi, + mtrr_state.var_ranges[i].mask_lo >> 12, + mtrr_attrib_to_str(mtrr_state.var_ranges[i].base_lo & 0xff)); + else + printk(KERN_INFO "MTRR %u disabled\n", i); + } + } +} + +/* Some BIOS's are fucked and don't set all MTRRs the same! */ +void __init mtrr_state_warn(void) +{ + unsigned long mask = smp_changes_mask; + + if (!mask) + return; + if (mask & MTRR_CHANGE_MASK_FIXED) + printk(KERN_WARNING "mtrr: your CPUs had inconsistent fixed MTRR settings\n"); + if (mask & MTRR_CHANGE_MASK_VARIABLE) + printk(KERN_WARNING "mtrr: your CPUs had inconsistent variable MTRR settings\n"); + if (mask & MTRR_CHANGE_MASK_DEFTYPE) + printk(KERN_WARNING "mtrr: your CPUs had inconsistent MTRRdefType settings\n"); + printk(KERN_INFO "mtrr: probably your BIOS does not setup all CPUs.\n"); + printk(KERN_INFO "mtrr: corrected configuration.\n"); +} + +/* Doesn't attempt to pass an error out to MTRR users + because it's quite complicated in some cases and probably not + worth it because the best error handling is to ignore it. */ +void mtrr_wrmsr(unsigned msr, unsigned a, unsigned b) +{ + if (wrmsr_safe(msr, a, b) < 0) + printk(KERN_ERR + "MTRR: CPU %u: Writing MSR %x to %x:%x failed\n", + smp_processor_id(), msr, a, b); +} + +/** + * Enable and allow read/write of extended fixed-range MTRR bits on K8 CPUs + * see AMD publication no. 24593, chapter 3.2.1 for more information + */ +static inline void k8_enable_fixed_iorrs(void) +{ + unsigned lo, hi; + + rdmsr(MSR_K8_SYSCFG, lo, hi); + mtrr_wrmsr(MSR_K8_SYSCFG, lo + | K8_MTRRFIXRANGE_DRAM_ENABLE + | K8_MTRRFIXRANGE_DRAM_MODIFY, hi); +} + +/** + * Checks and updates an fixed-range MTRR if it differs from the value it + * should have. If K8 extenstions are wanted, update the K8 SYSCFG MSR also. + * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information + * \param msr MSR address of the MTTR which should be checked and updated + * \param changed pointer which indicates whether the MTRR needed to be changed + * \param msrwords pointer to the MSR values which the MSR should have + */ +static void set_fixed_range(int msr, int * changed, unsigned int * msrwords) +{ + unsigned lo, hi; + + rdmsr(msr, lo, hi); + + if (lo != msrwords[0] || hi != msrwords[1]) { + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + boot_cpu_data.x86 == 15 && + ((msrwords[0] | msrwords[1]) & K8_MTRR_RDMEM_WRMEM_MASK)) + k8_enable_fixed_iorrs(); + mtrr_wrmsr(msr, msrwords[0], msrwords[1]); + *changed = TRUE; + } +} + +int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg) +/* [SUMMARY] Get a free MTRR. + <base> The starting (base) address of the region. + <size> The size (in bytes) of the region. + [RETURNS] The index of the region on success, else -1 on error. +*/ +{ + int i, max; + mtrr_type ltype; + unsigned long lbase, lsize; + + max = num_var_ranges; + if (replace_reg >= 0 && replace_reg < max) + return replace_reg; + for (i = 0; i < max; ++i) { + mtrr_if->get(i, &lbase, &lsize, <ype); + if (lsize == 0) + return i; + } + return -ENOSPC; +} + +static void generic_get_mtrr(unsigned int reg, unsigned long *base, + unsigned long *size, mtrr_type *type) +{ + unsigned int mask_lo, mask_hi, base_lo, base_hi; + + rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi); + if ((mask_lo & 0x800) == 0) { + /* Invalid (i.e. free) range */ + *base = 0; + *size = 0; + *type = 0; + return; + } + + rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi); + + /* Work out the shifted address mask. */ + mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT) + | mask_lo >> PAGE_SHIFT; + + /* This works correctly if size is a power of two, i.e. a + contiguous range. */ + *size = -mask_lo; + *base = base_hi << (32 - PAGE_SHIFT) | base_lo >> PAGE_SHIFT; + *type = base_lo & 0xff; +} + +/** + * Checks and updates the fixed-range MTRRs if they differ from the saved set + * \param frs pointer to fixed-range MTRR values, saved by get_fixed_ranges() + */ +static int set_fixed_ranges(mtrr_type * frs) +{ + unsigned long long *saved = (unsigned long long *) frs; + int changed = FALSE; + int block=-1, range; + + while (fixed_range_blocks[++block].ranges) + for (range=0; range < fixed_range_blocks[block].ranges; range++) + set_fixed_range(fixed_range_blocks[block].base_msr + range, + &changed, (unsigned int *) saved++); + + return changed; +} + +/* Set the MSR pair relating to a var range. Returns TRUE if + changes are made */ +static int set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr) +{ + unsigned int lo, hi; + int changed = FALSE; + + rdmsr(MTRRphysBase_MSR(index), lo, hi); + if ((vr->base_lo & 0xfffff0ffUL) != (lo & 0xfffff0ffUL) + || (vr->base_hi & (size_and_mask >> (32 - PAGE_SHIFT))) != + (hi & (size_and_mask >> (32 - PAGE_SHIFT)))) { + mtrr_wrmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi); + changed = TRUE; + } + + rdmsr(MTRRphysMask_MSR(index), lo, hi); + + if ((vr->mask_lo & 0xfffff800UL) != (lo & 0xfffff800UL) + || (vr->mask_hi & (size_and_mask >> (32 - PAGE_SHIFT))) != + (hi & (size_and_mask >> (32 - PAGE_SHIFT)))) { + mtrr_wrmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi); + changed = TRUE; + } + return changed; +} + +static u32 deftype_lo, deftype_hi; + +static unsigned long set_mtrr_state(void) +/* [SUMMARY] Set the MTRR state for this CPU. + <state> The MTRR state information to read. + <ctxt> Some relevant CPU context. + [NOTE] The CPU must already be in a safe state for MTRR changes. + [RETURNS] 0 if no changes made, else a mask indication what was changed. +*/ +{ + unsigned int i; + unsigned long change_mask = 0; + + for (i = 0; i < num_var_ranges; i++) + if (set_mtrr_var_ranges(i, &mtrr_state.var_ranges[i])) + change_mask |= MTRR_CHANGE_MASK_VARIABLE; + + if (mtrr_state.have_fixed && set_fixed_ranges(mtrr_state.fixed_ranges)) + change_mask |= MTRR_CHANGE_MASK_FIXED; + + /* Set_mtrr_restore restores the old value of MTRRdefType, + so to set it we fiddle with the saved value */ + if ((deftype_lo & 0xff) != mtrr_state.def_type + || ((deftype_lo & 0xc00) >> 10) != mtrr_state.enabled) { + deftype_lo = (deftype_lo & ~0xcff) | mtrr_state.def_type | (mtrr_state.enabled << 10); + change_mask |= MTRR_CHANGE_MASK_DEFTYPE; + } + + return change_mask; +} + + +static unsigned long cr4 = 0; +static DEFINE_SPINLOCK(set_atomicity_lock); + +/* + * Since we are disabling the cache don't allow any interrupts - they + * would run extremely slow and would only increase the pain. The caller must + * ensure that local interrupts are disabled and are reenabled after post_set() + * has been called. + */ + +static void prepare_set(void) __acquires(set_atomicity_lock) +{ + unsigned long cr0; + + /* Note that this is not ideal, since the cache is only flushed/disabled + for this CPU while the MTRRs are changed, but changing this requires + more invasive changes to the way the kernel boots */ + + spin_lock(&set_atomicity_lock); + + /* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */ + cr0 = read_cr0() | 0x40000000; /* set CD flag */ + write_cr0(cr0); + wbinvd(); + + /* Save value of CR4 and clear Page Global Enable (bit 7) */ + if ( cpu_has_pge ) { + cr4 = read_cr4(); + write_cr4(cr4 & ~X86_CR4_PGE); + } + + /* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */ + __flush_tlb(); + + /* Save MTRR state */ + rdmsr(MTRRdefType_MSR, deftype_lo, deftype_hi); + + /* Disable MTRRs, and set the default type to uncached */ + mtrr_wrmsr(MTRRdefType_MSR, deftype_lo & ~0xcff, deftype_hi); +} + +static void post_set(void) __releases(set_atomicity_lock) +{ + /* Flush TLBs (no need to flush caches - they are disabled) */ + __flush_tlb(); + + /* Intel (P6) standard MTRRs */ + mtrr_wrmsr(MTRRdefType_MSR, deftype_lo, deftype_hi); + + /* Enable caches */ + write_cr0(read_cr0() & 0xbfffffff); + + /* Restore value of CR4 */ + if ( cpu_has_pge ) + write_cr4(cr4); + spin_unlock(&set_atomicity_lock); +} + +static void generic_set_all(void) +{ + unsigned long mask, count; + unsigned long flags; + + local_irq_save(flags); + prepare_set(); + + /* Actually set the state */ + mask = set_mtrr_state(); + + post_set(); + local_irq_restore(flags); + + /* Use the atomic bitops to update the global mask */ + for (count = 0; count < sizeof mask * 8; ++count) { + if (mask & 0x01) + set_bit(count, &smp_changes_mask); + mask >>= 1; + } + +} + +static void generic_set_mtrr(unsigned int reg, unsigned long base, + unsigned long size, mtrr_type type) +/* [SUMMARY] Set variable MTRR register on the local CPU. + <reg> The register to set. + <base> The base address of the region. + <size> The size of the region. If this is 0 the region is disabled. + <type> The type of the region. + <do_safe> If TRUE, do the change safely. If FALSE, safety measures should + be done externally. + [RETURNS] Nothing. +*/ +{ + unsigned long flags; + struct mtrr_var_range *vr; + + vr = &mtrr_state.var_ranges[reg]; + + local_irq_save(flags); + prepare_set(); + + if (size == 0) { + /* The invalid bit is kept in the mask, so we simply clear the + relevant mask register to disable a range. */ + mtrr_wrmsr(MTRRphysMask_MSR(reg), 0, 0); + memset(vr, 0, sizeof(struct mtrr_var_range)); + } else { + vr->base_lo = base << PAGE_SHIFT | type; + vr->base_hi = (base & size_and_mask) >> (32 - PAGE_SHIFT); + vr->mask_lo = -size << PAGE_SHIFT | 0x800; + vr->mask_hi = (-size & size_and_mask) >> (32 - PAGE_SHIFT); + + mtrr_wrmsr(MTRRphysBase_MSR(reg), vr->base_lo, vr->base_hi); + mtrr_wrmsr(MTRRphysMask_MSR(reg), vr->mask_lo, vr->mask_hi); + } + + post_set(); + local_irq_restore(flags); +} + +int generic_validate_add_page(unsigned long base, unsigned long size, unsigned int type) +{ + unsigned long lbase, last; + + /* For Intel PPro stepping <= 7, must be 4 MiB aligned + and not touch 0x70000000->0x7003FFFF */ + if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model == 1 && + boot_cpu_data.x86_mask <= 7) { + if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) { + printk(KERN_WARNING "mtrr: base(0x%lx000) is not 4 MiB aligned\n", base); + return -EINVAL; + } + if (!(base + size < 0x70000 || base > 0x7003F) && + (type == MTRR_TYPE_WRCOMB + || type == MTRR_TYPE_WRBACK)) { + printk(KERN_WARNING "mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n"); + return -EINVAL; + } + } + + /* Check upper bits of base and last are equal and lower bits are 0 + for base and 1 for last */ + last = base + size - 1; + for (lbase = base; !(lbase & 1) && (last & 1); + lbase = lbase >> 1, last = last >> 1) ; + if (lbase != last) { + printk(KERN_WARNING "mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n", + base, size); + return -EINVAL; + } + return 0; +} + + +static int generic_have_wrcomb(void) +{ + unsigned long config, dummy; + rdmsr(MTRRcap_MSR, config, dummy); + return (config & (1 << 10)); +} + +int positive_have_wrcomb(void) +{ + return 1; +} + +/* generic structure... + */ +struct mtrr_ops generic_mtrr_ops = { + .use_intel_if = 1, + .set_all = generic_set_all, + .get = generic_get_mtrr, + .get_free_region = generic_get_free_region, + .set = generic_set_mtrr, + .validate_add_page = generic_validate_add_page, + .have_wrcomb = generic_have_wrcomb, +}; diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c new file mode 100644 index 000000000000..c7d8f1756745 --- /dev/null +++ b/arch/x86/kernel/cpu/mtrr/if.c @@ -0,0 +1,439 @@ +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <linux/capability.h> +#include <linux/ctype.h> +#include <linux/module.h> +#include <linux/seq_file.h> +#include <asm/uaccess.h> + +#define LINE_SIZE 80 + +#include <asm/mtrr.h> +#include "mtrr.h" + +/* RED-PEN: this is accessed without any locking */ +extern unsigned int *usage_table; + + +#define FILE_FCOUNT(f) (((struct seq_file *)((f)->private_data))->private) + +static const char *const mtrr_strings[MTRR_NUM_TYPES] = +{ + "uncachable", /* 0 */ + "write-combining", /* 1 */ + "?", /* 2 */ + "?", /* 3 */ + "write-through", /* 4 */ + "write-protect", /* 5 */ + "write-back", /* 6 */ +}; + +const char *mtrr_attrib_to_str(int x) +{ + return (x <= 6) ? mtrr_strings[x] : "?"; +} + +#ifdef CONFIG_PROC_FS + +static int +mtrr_file_add(unsigned long base, unsigned long size, + unsigned int type, char increment, struct file *file, int page) +{ + int reg, max; + unsigned int *fcount = FILE_FCOUNT(file); + + max = num_var_ranges; + if (fcount == NULL) { + fcount = kzalloc(max * sizeof *fcount, GFP_KERNEL); + if (!fcount) + return -ENOMEM; + FILE_FCOUNT(file) = fcount; + } + if (!page) { + if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) + return -EINVAL; + base >>= PAGE_SHIFT; + size >>= PAGE_SHIFT; + } + reg = mtrr_add_page(base, size, type, 1); + if (reg >= 0) + ++fcount[reg]; + return reg; +} + +static int +mtrr_file_del(unsigned long base, unsigned long size, + struct file *file, int page) +{ + int reg; + unsigned int *fcount = FILE_FCOUNT(file); + + if (!page) { + if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) + return -EINVAL; + base >>= PAGE_SHIFT; + size >>= PAGE_SHIFT; + } + reg = mtrr_del_page(-1, base, size); + if (reg < 0) + return reg; + if (fcount == NULL) + return reg; + if (fcount[reg] < 1) + return -EINVAL; + --fcount[reg]; + return reg; +} + +/* RED-PEN: seq_file can seek now. this is ignored. */ +static ssize_t +mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos) +/* Format of control line: + "base=%Lx size=%Lx type=%s" OR: + "disable=%d" +*/ +{ + int i, err; + unsigned long reg; + unsigned long long base, size; + char *ptr; + char line[LINE_SIZE]; + size_t linelen; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (!len) + return -EINVAL; + memset(line, 0, LINE_SIZE); + if (len > LINE_SIZE) + len = LINE_SIZE; + if (copy_from_user(line, buf, len - 1)) + return -EFAULT; + linelen = strlen(line); + ptr = line + linelen - 1; + if (linelen && *ptr == '\n') + *ptr = '\0'; + if (!strncmp(line, "disable=", 8)) { + reg = simple_strtoul(line + 8, &ptr, 0); + err = mtrr_del_page(reg, 0, 0); + if (err < 0) + return err; + return len; + } + if (strncmp(line, "base=", 5)) + return -EINVAL; + base = simple_strtoull(line + 5, &ptr, 0); + for (; isspace(*ptr); ++ptr) ; + if (strncmp(ptr, "size=", 5)) + return -EINVAL; + size = simple_strtoull(ptr + 5, &ptr, 0); + if ((base & 0xfff) || (size & 0xfff)) + return -EINVAL; + for (; isspace(*ptr); ++ptr) ; + if (strncmp(ptr, "type=", 5)) + return -EINVAL; + ptr += 5; + for (; isspace(*ptr); ++ptr) ; + for (i = 0; i < MTRR_NUM_TYPES; ++i) { + if (strcmp(ptr, mtrr_strings[i])) + continue; + base >>= PAGE_SHIFT; + size >>= PAGE_SHIFT; + err = + mtrr_add_page((unsigned long) base, (unsigned long) size, i, + 1); + if (err < 0) + return err; + return len; + } + return -EINVAL; +} + +static long +mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) +{ + int err = 0; + mtrr_type type; + unsigned long size; + struct mtrr_sentry sentry; + struct mtrr_gentry gentry; + void __user *arg = (void __user *) __arg; + + switch (cmd) { + case MTRRIOC_ADD_ENTRY: + case MTRRIOC_SET_ENTRY: + case MTRRIOC_DEL_ENTRY: + case MTRRIOC_KILL_ENTRY: + case MTRRIOC_ADD_PAGE_ENTRY: + case MTRRIOC_SET_PAGE_ENTRY: + case MTRRIOC_DEL_PAGE_ENTRY: + case MTRRIOC_KILL_PAGE_ENTRY: + if (copy_from_user(&sentry, arg, sizeof sentry)) + return -EFAULT; + break; + case MTRRIOC_GET_ENTRY: + case MTRRIOC_GET_PAGE_ENTRY: + if (copy_from_user(&gentry, arg, sizeof gentry)) + return -EFAULT; + break; +#ifdef CONFIG_COMPAT + case MTRRIOC32_ADD_ENTRY: + case MTRRIOC32_SET_ENTRY: + case MTRRIOC32_DEL_ENTRY: + case MTRRIOC32_KILL_ENTRY: + case MTRRIOC32_ADD_PAGE_ENTRY: + case MTRRIOC32_SET_PAGE_ENTRY: + case MTRRIOC32_DEL_PAGE_ENTRY: + case MTRRIOC32_KILL_PAGE_ENTRY: { + struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)__arg; + err = get_user(sentry.base, &s32->base); + err |= get_user(sentry.size, &s32->size); + err |= get_user(sentry.type, &s32->type); + if (err) + return err; + break; + } + case MTRRIOC32_GET_ENTRY: + case MTRRIOC32_GET_PAGE_ENTRY: { + struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg; + err = get_user(gentry.regnum, &g32->regnum); + err |= get_user(gentry.base, &g32->base); + err |= get_user(gentry.size, &g32->size); + err |= get_user(gentry.type, &g32->type); + if (err) + return err; + break; + } +#endif + } + + switch (cmd) { + default: + return -ENOTTY; + case MTRRIOC_ADD_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_ADD_ENTRY: +#endif + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + err = + mtrr_file_add(sentry.base, sentry.size, sentry.type, 1, + file, 0); + break; + case MTRRIOC_SET_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_SET_ENTRY: +#endif + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + err = mtrr_add(sentry.base, sentry.size, sentry.type, 0); + break; + case MTRRIOC_DEL_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_DEL_ENTRY: +#endif + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + err = mtrr_file_del(sentry.base, sentry.size, file, 0); + break; + case MTRRIOC_KILL_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_KILL_ENTRY: +#endif + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + err = mtrr_del(-1, sentry.base, sentry.size); + break; + case MTRRIOC_GET_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_GET_ENTRY: +#endif + if (gentry.regnum >= num_var_ranges) + return -EINVAL; + mtrr_if->get(gentry.regnum, &gentry.base, &size, &type); + + /* Hide entries that go above 4GB */ + if (gentry.base + size - 1 >= (1UL << (8 * sizeof(gentry.size) - PAGE_SHIFT)) + || size >= (1UL << (8 * sizeof(gentry.size) - PAGE_SHIFT))) + gentry.base = gentry.size = gentry.type = 0; + else { + gentry.base <<= PAGE_SHIFT; + gentry.size = size << PAGE_SHIFT; + gentry.type = type; + } + + break; + case MTRRIOC_ADD_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_ADD_PAGE_ENTRY: +#endif + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + err = + mtrr_file_add(sentry.base, sentry.size, sentry.type, 1, + file, 1); + break; + case MTRRIOC_SET_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_SET_PAGE_ENTRY: +#endif + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0); + break; + case MTRRIOC_DEL_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_DEL_PAGE_ENTRY: +#endif + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + err = mtrr_file_del(sentry.base, sentry.size, file, 1); + break; + case MTRRIOC_KILL_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_KILL_PAGE_ENTRY: +#endif + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + err = mtrr_del_page(-1, sentry.base, sentry.size); + break; + case MTRRIOC_GET_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_GET_PAGE_ENTRY: +#endif + if (gentry.regnum >= num_var_ranges) + return -EINVAL; + mtrr_if->get(gentry.regnum, &gentry.base, &size, &type); + /* Hide entries that would overflow */ + if (size != (__typeof__(gentry.size))size) + gentry.base = gentry.size = gentry.type = 0; + else { + gentry.size = size; + gentry.type = type; + } + break; + } + + if (err) + return err; + + switch(cmd) { + case MTRRIOC_GET_ENTRY: + case MTRRIOC_GET_PAGE_ENTRY: + if (copy_to_user(arg, &gentry, sizeof gentry)) + err = -EFAULT; + break; +#ifdef CONFIG_COMPAT + case MTRRIOC32_GET_ENTRY: + case MTRRIOC32_GET_PAGE_ENTRY: { + struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg; + err = put_user(gentry.base, &g32->base); + err |= put_user(gentry.size, &g32->size); + err |= put_user(gentry.regnum, &g32->regnum); + err |= put_user(gentry.type, &g32->type); + break; + } +#endif + } + return err; +} + +static int +mtrr_close(struct inode *ino, struct file *file) +{ + int i, max; + unsigned int *fcount = FILE_FCOUNT(file); + + if (fcount != NULL) { + max = num_var_ranges; + for (i = 0; i < max; ++i) { + while (fcount[i] > 0) { + mtrr_del(i, 0, 0); + --fcount[i]; + } + } + kfree(fcount); + FILE_FCOUNT(file) = NULL; + } + return single_release(ino, file); +} + +static int mtrr_seq_show(struct seq_file *seq, void *offset); + +static int mtrr_open(struct inode *inode, struct file *file) +{ + if (!mtrr_if) + return -EIO; + if (!mtrr_if->get) + return -ENXIO; + return single_open(file, mtrr_seq_show, NULL); +} + +static const struct file_operations mtrr_fops = { + .owner = THIS_MODULE, + .open = mtrr_open, + .read = seq_read, + .llseek = seq_lseek, + .write = mtrr_write, + .unlocked_ioctl = mtrr_ioctl, + .compat_ioctl = mtrr_ioctl, + .release = mtrr_close, +}; + + +static struct proc_dir_entry *proc_root_mtrr; + + +static int mtrr_seq_show(struct seq_file *seq, void *offset) +{ + char factor; + int i, max, len; + mtrr_type type; + unsigned long base, size; + + len = 0; + max = num_var_ranges; + for (i = 0; i < max; i++) { + mtrr_if->get(i, &base, &size, &type); + if (size == 0) + usage_table[i] = 0; + else { + if (size < (0x100000 >> PAGE_SHIFT)) { + /* less than 1MB */ + factor = 'K'; + size <<= PAGE_SHIFT - 10; + } else { + factor = 'M'; + size >>= 20 - PAGE_SHIFT; + } + /* RED-PEN: base can be > 32bit */ + len += seq_printf(seq, + "reg%02i: base=0x%05lx000 (%4luMB), size=%4lu%cB: %s, count=%d\n", + i, base, base >> (20 - PAGE_SHIFT), size, factor, + mtrr_attrib_to_str(type), usage_table[i]); + } + } + return 0; +} + +static int __init mtrr_if_init(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + + if ((!cpu_has(c, X86_FEATURE_MTRR)) && + (!cpu_has(c, X86_FEATURE_K6_MTRR)) && + (!cpu_has(c, X86_FEATURE_CYRIX_ARR)) && + (!cpu_has(c, X86_FEATURE_CENTAUR_MCR))) + return -ENODEV; + + proc_root_mtrr = + create_proc_entry("mtrr", S_IWUSR | S_IRUGO, &proc_root); + if (proc_root_mtrr) { + proc_root_mtrr->owner = THIS_MODULE; + proc_root_mtrr->proc_fops = &mtrr_fops; + } + return 0; +} + +arch_initcall(mtrr_if_init); +#endif /* CONFIG_PROC_FS */ diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c new file mode 100644 index 000000000000..c48b6fea5ab4 --- /dev/null +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -0,0 +1,768 @@ +/* Generic MTRR (Memory Type Range Register) driver. + + Copyright (C) 1997-2000 Richard Gooch + Copyright (c) 2002 Patrick Mochel + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with this library; if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Richard Gooch may be reached by email at rgooch@atnf.csiro.au + The postal address is: + Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia. + + Source: "Pentium Pro Family Developer's Manual, Volume 3: + Operating System Writer's Guide" (Intel document number 242692), + section 11.11.7 + + This was cleaned and made readable by Patrick Mochel <mochel@osdl.org> + on 6-7 March 2002. + Source: Intel Architecture Software Developers Manual, Volume 3: + System Programming Guide; Section 9.11. (1997 edition - PPro). +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/smp.h> +#include <linux/cpu.h> +#include <linux/mutex.h> + +#include <asm/mtrr.h> + +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/msr.h> +#include "mtrr.h" + +u32 num_var_ranges = 0; + +unsigned int *usage_table; +static DEFINE_MUTEX(mtrr_mutex); + +u64 size_or_mask, size_and_mask; + +static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {}; + +struct mtrr_ops * mtrr_if = NULL; + +static void set_mtrr(unsigned int reg, unsigned long base, + unsigned long size, mtrr_type type); + +#ifndef CONFIG_X86_64 +extern int arr3_protected; +#else +#define arr3_protected 0 +#endif + +void set_mtrr_ops(struct mtrr_ops * ops) +{ + if (ops->vendor && ops->vendor < X86_VENDOR_NUM) + mtrr_ops[ops->vendor] = ops; +} + +/* Returns non-zero if we have the write-combining memory type */ +static int have_wrcomb(void) +{ + struct pci_dev *dev; + u8 rev; + + if ((dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) != NULL) { + /* ServerWorks LE chipsets < rev 6 have problems with write-combining + Don't allow it and leave room for other chipsets to be tagged */ + if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS && + dev->device == PCI_DEVICE_ID_SERVERWORKS_LE) { + pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev); + if (rev <= 5) { + printk(KERN_INFO "mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n"); + pci_dev_put(dev); + return 0; + } + } + /* Intel 450NX errata # 23. Non ascending cacheline evictions to + write combining memory may resulting in data corruption */ + if (dev->vendor == PCI_VENDOR_ID_INTEL && + dev->device == PCI_DEVICE_ID_INTEL_82451NX) { + printk(KERN_INFO "mtrr: Intel 450NX MMC detected. Write-combining disabled.\n"); + pci_dev_put(dev); + return 0; + } + pci_dev_put(dev); + } + return (mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0); +} + +/* This function returns the number of variable MTRRs */ +static void __init set_num_var_ranges(void) +{ + unsigned long config = 0, dummy; + + if (use_intel()) { + rdmsr(MTRRcap_MSR, config, dummy); + } else if (is_cpu(AMD)) + config = 2; + else if (is_cpu(CYRIX) || is_cpu(CENTAUR)) + config = 8; + num_var_ranges = config & 0xff; +} + +static void __init init_table(void) +{ + int i, max; + + max = num_var_ranges; + if ((usage_table = kmalloc(max * sizeof *usage_table, GFP_KERNEL)) + == NULL) { + printk(KERN_ERR "mtrr: could not allocate\n"); + return; + } + for (i = 0; i < max; i++) + usage_table[i] = 1; +} + +struct set_mtrr_data { + atomic_t count; + atomic_t gate; + unsigned long smp_base; + unsigned long smp_size; + unsigned int smp_reg; + mtrr_type smp_type; +}; + +#ifdef CONFIG_SMP + +static void ipi_handler(void *info) +/* [SUMMARY] Synchronisation handler. Executed by "other" CPUs. + [RETURNS] Nothing. +*/ +{ + struct set_mtrr_data *data = info; + unsigned long flags; + + local_irq_save(flags); + + atomic_dec(&data->count); + while(!atomic_read(&data->gate)) + cpu_relax(); + + /* The master has cleared me to execute */ + if (data->smp_reg != ~0U) + mtrr_if->set(data->smp_reg, data->smp_base, + data->smp_size, data->smp_type); + else + mtrr_if->set_all(); + + atomic_dec(&data->count); + while(atomic_read(&data->gate)) + cpu_relax(); + + atomic_dec(&data->count); + local_irq_restore(flags); +} + +#endif + +static inline int types_compatible(mtrr_type type1, mtrr_type type2) { + return type1 == MTRR_TYPE_UNCACHABLE || + type2 == MTRR_TYPE_UNCACHABLE || + (type1 == MTRR_TYPE_WRTHROUGH && type2 == MTRR_TYPE_WRBACK) || + (type1 == MTRR_TYPE_WRBACK && type2 == MTRR_TYPE_WRTHROUGH); +} + +/** + * set_mtrr - update mtrrs on all processors + * @reg: mtrr in question + * @base: mtrr base + * @size: mtrr size + * @type: mtrr type + * + * This is kinda tricky, but fortunately, Intel spelled it out for us cleanly: + * + * 1. Send IPI to do the following: + * 2. Disable Interrupts + * 3. Wait for all procs to do so + * 4. Enter no-fill cache mode + * 5. Flush caches + * 6. Clear PGE bit + * 7. Flush all TLBs + * 8. Disable all range registers + * 9. Update the MTRRs + * 10. Enable all range registers + * 11. Flush all TLBs and caches again + * 12. Enter normal cache mode and reenable caching + * 13. Set PGE + * 14. Wait for buddies to catch up + * 15. Enable interrupts. + * + * What does that mean for us? Well, first we set data.count to the number + * of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait + * until it hits 0 and proceed. We set the data.gate flag and reset data.count. + * Meanwhile, they are waiting for that flag to be set. Once it's set, each + * CPU goes through the transition of updating MTRRs. The CPU vendors may each do it + * differently, so we call mtrr_if->set() callback and let them take care of it. + * When they're done, they again decrement data->count and wait for data.gate to + * be reset. + * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag. + * Everyone then enables interrupts and we all continue on. + * + * Note that the mechanism is the same for UP systems, too; all the SMP stuff + * becomes nops. + */ +static void set_mtrr(unsigned int reg, unsigned long base, + unsigned long size, mtrr_type type) +{ + struct set_mtrr_data data; + unsigned long flags; + + data.smp_reg = reg; + data.smp_base = base; + data.smp_size = size; + data.smp_type = type; + atomic_set(&data.count, num_booting_cpus() - 1); + /* make sure data.count is visible before unleashing other CPUs */ + smp_wmb(); + atomic_set(&data.gate,0); + + /* Start the ball rolling on other CPUs */ + if (smp_call_function(ipi_handler, &data, 1, 0) != 0) + panic("mtrr: timed out waiting for other CPUs\n"); + + local_irq_save(flags); + + while(atomic_read(&data.count)) + cpu_relax(); + + /* ok, reset count and toggle gate */ + atomic_set(&data.count, num_booting_cpus() - 1); + smp_wmb(); + atomic_set(&data.gate,1); + + /* do our MTRR business */ + + /* HACK! + * We use this same function to initialize the mtrrs on boot. + * The state of the boot cpu's mtrrs has been saved, and we want + * to replicate across all the APs. + * If we're doing that @reg is set to something special... + */ + if (reg != ~0U) + mtrr_if->set(reg,base,size,type); + + /* wait for the others */ + while(atomic_read(&data.count)) + cpu_relax(); + + atomic_set(&data.count, num_booting_cpus() - 1); + smp_wmb(); + atomic_set(&data.gate,0); + + /* + * Wait here for everyone to have seen the gate change + * So we're the last ones to touch 'data' + */ + while(atomic_read(&data.count)) + cpu_relax(); + + local_irq_restore(flags); +} + +/** + * mtrr_add_page - Add a memory type region + * @base: Physical base address of region in pages (in units of 4 kB!) + * @size: Physical size of region in pages (4 kB) + * @type: Type of MTRR desired + * @increment: If this is true do usage counting on the region + * + * Memory type region registers control the caching on newer Intel and + * non Intel processors. This function allows drivers to request an + * MTRR is added. The details and hardware specifics of each processor's + * implementation are hidden from the caller, but nevertheless the + * caller should expect to need to provide a power of two size on an + * equivalent power of two boundary. + * + * If the region cannot be added either because all regions are in use + * or the CPU cannot support it a negative value is returned. On success + * the register number for this entry is returned, but should be treated + * as a cookie only. + * + * On a multiprocessor machine the changes are made to all processors. + * This is required on x86 by the Intel processors. + * + * The available types are + * + * %MTRR_TYPE_UNCACHABLE - No caching + * + * %MTRR_TYPE_WRBACK - Write data back in bursts whenever + * + * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts + * + * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes + * + * BUGS: Needs a quiet flag for the cases where drivers do not mind + * failures and do not wish system log messages to be sent. + */ + +int mtrr_add_page(unsigned long base, unsigned long size, + unsigned int type, char increment) +{ + int i, replace, error; + mtrr_type ltype; + unsigned long lbase, lsize; + + if (!mtrr_if) + return -ENXIO; + + if ((error = mtrr_if->validate_add_page(base,size,type))) + return error; + + if (type >= MTRR_NUM_TYPES) { + printk(KERN_WARNING "mtrr: type: %u invalid\n", type); + return -EINVAL; + } + + /* If the type is WC, check that this processor supports it */ + if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) { + printk(KERN_WARNING + "mtrr: your processor doesn't support write-combining\n"); + return -ENOSYS; + } + + if (!size) { + printk(KERN_WARNING "mtrr: zero sized request\n"); + return -EINVAL; + } + + if (base & size_or_mask || size & size_or_mask) { + printk(KERN_WARNING "mtrr: base or size exceeds the MTRR width\n"); + return -EINVAL; + } + + error = -EINVAL; + replace = -1; + + /* No CPU hotplug when we change MTRR entries */ + lock_cpu_hotplug(); + /* Search for existing MTRR */ + mutex_lock(&mtrr_mutex); + for (i = 0; i < num_var_ranges; ++i) { + mtrr_if->get(i, &lbase, &lsize, <ype); + if (!lsize || base > lbase + lsize - 1 || base + size - 1 < lbase) + continue; + /* At this point we know there is some kind of overlap/enclosure */ + if (base < lbase || base + size - 1 > lbase + lsize - 1) { + if (base <= lbase && base + size - 1 >= lbase + lsize - 1) { + /* New region encloses an existing region */ + if (type == ltype) { + replace = replace == -1 ? i : -2; + continue; + } + else if (types_compatible(type, ltype)) + continue; + } + printk(KERN_WARNING + "mtrr: 0x%lx000,0x%lx000 overlaps existing" + " 0x%lx000,0x%lx000\n", base, size, lbase, + lsize); + goto out; + } + /* New region is enclosed by an existing region */ + if (ltype != type) { + if (types_compatible(type, ltype)) + continue; + printk (KERN_WARNING "mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n", + base, size, mtrr_attrib_to_str(ltype), + mtrr_attrib_to_str(type)); + goto out; + } + if (increment) + ++usage_table[i]; + error = i; + goto out; + } + /* Search for an empty MTRR */ + i = mtrr_if->get_free_region(base, size, replace); + if (i >= 0) { + set_mtrr(i, base, size, type); + if (likely(replace < 0)) + usage_table[i] = 1; + else { + usage_table[i] = usage_table[replace] + !!increment; + if (unlikely(replace != i)) { + set_mtrr(replace, 0, 0, 0); + usage_table[replace] = 0; + } + } + } else + printk(KERN_INFO "mtrr: no more MTRRs available\n"); + error = i; + out: + mutex_unlock(&mtrr_mutex); + unlock_cpu_hotplug(); + return error; +} + +static int mtrr_check(unsigned long base, unsigned long size) +{ + if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) { + printk(KERN_WARNING + "mtrr: size and base must be multiples of 4 kiB\n"); + printk(KERN_DEBUG + "mtrr: size: 0x%lx base: 0x%lx\n", size, base); + dump_stack(); + return -1; + } + return 0; +} + +/** + * mtrr_add - Add a memory type region + * @base: Physical base address of region + * @size: Physical size of region + * @type: Type of MTRR desired + * @increment: If this is true do usage counting on the region + * + * Memory type region registers control the caching on newer Intel and + * non Intel processors. This function allows drivers to request an + * MTRR is added. The details and hardware specifics of each processor's + * implementation are hidden from the caller, but nevertheless the + * caller should expect to need to provide a power of two size on an + * equivalent power of two boundary. + * + * If the region cannot be added either because all regions are in use + * or the CPU cannot support it a negative value is returned. On success + * the register number for this entry is returned, but should be treated + * as a cookie only. + * + * On a multiprocessor machine the changes are made to all processors. + * This is required on x86 by the Intel processors. + * + * The available types are + * + * %MTRR_TYPE_UNCACHABLE - No caching + * + * %MTRR_TYPE_WRBACK - Write data back in bursts whenever + * + * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts + * + * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes + * + * BUGS: Needs a quiet flag for the cases where drivers do not mind + * failures and do not wish system log messages to be sent. + */ + +int +mtrr_add(unsigned long base, unsigned long size, unsigned int type, + char increment) +{ + if (mtrr_check(base, size)) + return -EINVAL; + return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type, + increment); +} + +/** + * mtrr_del_page - delete a memory type region + * @reg: Register returned by mtrr_add + * @base: Physical base address + * @size: Size of region + * + * If register is supplied then base and size are ignored. This is + * how drivers should call it. + * + * Releases an MTRR region. If the usage count drops to zero the + * register is freed and the region returns to default state. + * On success the register is returned, on failure a negative error + * code. + */ + +int mtrr_del_page(int reg, unsigned long base, unsigned long size) +{ + int i, max; + mtrr_type ltype; + unsigned long lbase, lsize; + int error = -EINVAL; + + if (!mtrr_if) + return -ENXIO; + + max = num_var_ranges; + /* No CPU hotplug when we change MTRR entries */ + lock_cpu_hotplug(); + mutex_lock(&mtrr_mutex); + if (reg < 0) { + /* Search for existing MTRR */ + for (i = 0; i < max; ++i) { + mtrr_if->get(i, &lbase, &lsize, <ype); + if (lbase == base && lsize == size) { + reg = i; + break; + } + } + if (reg < 0) { + printk(KERN_DEBUG "mtrr: no MTRR for %lx000,%lx000 found\n", base, + size); + goto out; + } + } + if (reg >= max) { + printk(KERN_WARNING "mtrr: register: %d too big\n", reg); + goto out; + } + if (is_cpu(CYRIX) && !use_intel()) { + if ((reg == 3) && arr3_protected) { + printk(KERN_WARNING "mtrr: ARR3 cannot be changed\n"); + goto out; + } + } + mtrr_if->get(reg, &lbase, &lsize, <ype); + if (lsize < 1) { + printk(KERN_WARNING "mtrr: MTRR %d not used\n", reg); + goto out; + } + if (usage_table[reg] < 1) { + printk(KERN_WARNING "mtrr: reg: %d has count=0\n", reg); + goto out; + } + if (--usage_table[reg] < 1) + set_mtrr(reg, 0, 0, 0); + error = reg; + out: + mutex_unlock(&mtrr_mutex); + unlock_cpu_hotplug(); + return error; +} +/** + * mtrr_del - delete a memory type region + * @reg: Register returned by mtrr_add + * @base: Physical base address + * @size: Size of region + * + * If register is supplied then base and size are ignored. This is + * how drivers should call it. + * + * Releases an MTRR region. If the usage count drops to zero the + * register is freed and the region returns to default state. + * On success the register is returned, on failure a negative error + * code. + */ + +int +mtrr_del(int reg, unsigned long base, unsigned long size) +{ + if (mtrr_check(base, size)) + return -EINVAL; + return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT); +} + +EXPORT_SYMBOL(mtrr_add); +EXPORT_SYMBOL(mtrr_del); + +/* HACK ALERT! + * These should be called implicitly, but we can't yet until all the initcall + * stuff is done... + */ +extern void amd_init_mtrr(void); +extern void cyrix_init_mtrr(void); +extern void centaur_init_mtrr(void); + +static void __init init_ifs(void) +{ +#ifndef CONFIG_X86_64 + amd_init_mtrr(); + cyrix_init_mtrr(); + centaur_init_mtrr(); +#endif +} + +/* The suspend/resume methods are only for CPU without MTRR. CPU using generic + * MTRR driver doesn't require this + */ +struct mtrr_value { + mtrr_type ltype; + unsigned long lbase; + unsigned long lsize; +}; + +static struct mtrr_value * mtrr_state; + +static int mtrr_save(struct sys_device * sysdev, pm_message_t state) +{ + int i; + int size = num_var_ranges * sizeof(struct mtrr_value); + + mtrr_state = kzalloc(size,GFP_ATOMIC); + if (!mtrr_state) + return -ENOMEM; + + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, + &mtrr_state[i].lbase, + &mtrr_state[i].lsize, + &mtrr_state[i].ltype); + } + return 0; +} + +static int mtrr_restore(struct sys_device * sysdev) +{ + int i; + + for (i = 0; i < num_var_ranges; i++) { + if (mtrr_state[i].lsize) + set_mtrr(i, + mtrr_state[i].lbase, + mtrr_state[i].lsize, + mtrr_state[i].ltype); + } + kfree(mtrr_state); + return 0; +} + + + +static struct sysdev_driver mtrr_sysdev_driver = { + .suspend = mtrr_save, + .resume = mtrr_restore, +}; + + +/** + * mtrr_bp_init - initialize mtrrs on the boot CPU + * + * This needs to be called early; before any of the other CPUs are + * initialized (i.e. before smp_init()). + * + */ +void __init mtrr_bp_init(void) +{ + init_ifs(); + + if (cpu_has_mtrr) { + mtrr_if = &generic_mtrr_ops; + size_or_mask = 0xff000000; /* 36 bits */ + size_and_mask = 0x00f00000; + + /* This is an AMD specific MSR, but we assume(hope?) that + Intel will implement it to when they extend the address + bus of the Xeon. */ + if (cpuid_eax(0x80000000) >= 0x80000008) { + u32 phys_addr; + phys_addr = cpuid_eax(0x80000008) & 0xff; + /* CPUID workaround for Intel 0F33/0F34 CPU */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_data.x86 == 0xF && + boot_cpu_data.x86_model == 0x3 && + (boot_cpu_data.x86_mask == 0x3 || + boot_cpu_data.x86_mask == 0x4)) + phys_addr = 36; + + size_or_mask = ~((1ULL << (phys_addr - PAGE_SHIFT)) - 1); + size_and_mask = ~size_or_mask & 0xfffff00000ULL; + } else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR && + boot_cpu_data.x86 == 6) { + /* VIA C* family have Intel style MTRRs, but + don't support PAE */ + size_or_mask = 0xfff00000; /* 32 bits */ + size_and_mask = 0; + } + } else { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + if (cpu_has_k6_mtrr) { + /* Pre-Athlon (K6) AMD CPU MTRRs */ + mtrr_if = mtrr_ops[X86_VENDOR_AMD]; + size_or_mask = 0xfff00000; /* 32 bits */ + size_and_mask = 0; + } + break; + case X86_VENDOR_CENTAUR: + if (cpu_has_centaur_mcr) { + mtrr_if = mtrr_ops[X86_VENDOR_CENTAUR]; + size_or_mask = 0xfff00000; /* 32 bits */ + size_and_mask = 0; + } + break; + case X86_VENDOR_CYRIX: + if (cpu_has_cyrix_arr) { + mtrr_if = mtrr_ops[X86_VENDOR_CYRIX]; + size_or_mask = 0xfff00000; /* 32 bits */ + size_and_mask = 0; + } + break; + default: + break; + } + } + + if (mtrr_if) { + set_num_var_ranges(); + init_table(); + if (use_intel()) + get_mtrr_state(); + } +} + +void mtrr_ap_init(void) +{ + unsigned long flags; + + if (!mtrr_if || !use_intel()) + return; + /* + * Ideally we should hold mtrr_mutex here to avoid mtrr entries changed, + * but this routine will be called in cpu boot time, holding the lock + * breaks it. This routine is called in two cases: 1.very earily time + * of software resume, when there absolutely isn't mtrr entry changes; + * 2.cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug lock to + * prevent mtrr entry changes + */ + local_irq_save(flags); + + mtrr_if->set_all(); + + local_irq_restore(flags); +} + +/** + * Save current fixed-range MTRR state of the BSP + */ +void mtrr_save_state(void) +{ + int cpu = get_cpu(); + + if (cpu == 0) + mtrr_save_fixed_ranges(NULL); + else + smp_call_function_single(0, mtrr_save_fixed_ranges, NULL, 1, 1); + put_cpu(); +} + +static int __init mtrr_init_finialize(void) +{ + if (!mtrr_if) + return 0; + if (use_intel()) + mtrr_state_warn(); + else { + /* The CPUs haven't MTRR and seemes not support SMP. They have + * specific drivers, we use a tricky method to support + * suspend/resume for them. + * TBD: is there any system with such CPU which supports + * suspend/resume? if no, we should remove the code. + */ + sysdev_driver_register(&cpu_sysdev_class, + &mtrr_sysdev_driver); + } + return 0; +} +subsys_initcall(mtrr_init_finialize); diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h new file mode 100644 index 000000000000..289dfe6030e3 --- /dev/null +++ b/arch/x86/kernel/cpu/mtrr/mtrr.h @@ -0,0 +1,98 @@ +/* + * local mtrr defines. + */ + +#ifndef TRUE +#define TRUE 1 +#define FALSE 0 +#endif + +#define MTRRcap_MSR 0x0fe +#define MTRRdefType_MSR 0x2ff + +#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg)) +#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1) + +#define NUM_FIXED_RANGES 88 +#define MTRRfix64K_00000_MSR 0x250 +#define MTRRfix16K_80000_MSR 0x258 +#define MTRRfix16K_A0000_MSR 0x259 +#define MTRRfix4K_C0000_MSR 0x268 +#define MTRRfix4K_C8000_MSR 0x269 +#define MTRRfix4K_D0000_MSR 0x26a +#define MTRRfix4K_D8000_MSR 0x26b +#define MTRRfix4K_E0000_MSR 0x26c +#define MTRRfix4K_E8000_MSR 0x26d +#define MTRRfix4K_F0000_MSR 0x26e +#define MTRRfix4K_F8000_MSR 0x26f + +#define MTRR_CHANGE_MASK_FIXED 0x01 +#define MTRR_CHANGE_MASK_VARIABLE 0x02 +#define MTRR_CHANGE_MASK_DEFTYPE 0x04 + +/* In the Intel processor's MTRR interface, the MTRR type is always held in + an 8 bit field: */ +typedef u8 mtrr_type; + +struct mtrr_ops { + u32 vendor; + u32 use_intel_if; +// void (*init)(void); + void (*set)(unsigned int reg, unsigned long base, + unsigned long size, mtrr_type type); + void (*set_all)(void); + + void (*get)(unsigned int reg, unsigned long *base, + unsigned long *size, mtrr_type * type); + int (*get_free_region)(unsigned long base, unsigned long size, + int replace_reg); + int (*validate_add_page)(unsigned long base, unsigned long size, + unsigned int type); + int (*have_wrcomb)(void); +}; + +extern int generic_get_free_region(unsigned long base, unsigned long size, + int replace_reg); +extern int generic_validate_add_page(unsigned long base, unsigned long size, + unsigned int type); + +extern struct mtrr_ops generic_mtrr_ops; + +extern int positive_have_wrcomb(void); + +/* library functions for processor-specific routines */ +struct set_mtrr_context { + unsigned long flags; + unsigned long cr4val; + u32 deftype_lo; + u32 deftype_hi; + u32 ccr3; +}; + +struct mtrr_var_range { + u32 base_lo; + u32 base_hi; + u32 mask_lo; + u32 mask_hi; +}; + +void set_mtrr_done(struct set_mtrr_context *ctxt); +void set_mtrr_cache_disable(struct set_mtrr_context *ctxt); +void set_mtrr_prepare_save(struct set_mtrr_context *ctxt); + +void get_mtrr_state(void); + +extern void set_mtrr_ops(struct mtrr_ops * ops); + +extern u64 size_or_mask, size_and_mask; +extern struct mtrr_ops * mtrr_if; + +#define is_cpu(vnd) (mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd) +#define use_intel() (mtrr_if && mtrr_if->use_intel_if == 1) + +extern unsigned int num_var_ranges; + +void mtrr_state_warn(void); +const char *mtrr_attrib_to_str(int x); +void mtrr_wrmsr(unsigned, unsigned, unsigned); + diff --git a/arch/x86/kernel/cpu/mtrr/state.c b/arch/x86/kernel/cpu/mtrr/state.c new file mode 100644 index 000000000000..49e20c2afcdf --- /dev/null +++ b/arch/x86/kernel/cpu/mtrr/state.c @@ -0,0 +1,79 @@ +#include <linux/mm.h> +#include <linux/init.h> +#include <asm/io.h> +#include <asm/mtrr.h> +#include <asm/msr.h> +#include <asm/processor-cyrix.h> +#include "mtrr.h" + + +/* Put the processor into a state where MTRRs can be safely set */ +void set_mtrr_prepare_save(struct set_mtrr_context *ctxt) +{ + unsigned int cr0; + + /* Disable interrupts locally */ + local_irq_save(ctxt->flags); + + if (use_intel() || is_cpu(CYRIX)) { + + /* Save value of CR4 and clear Page Global Enable (bit 7) */ + if ( cpu_has_pge ) { + ctxt->cr4val = read_cr4(); + write_cr4(ctxt->cr4val & ~X86_CR4_PGE); + } + + /* Disable and flush caches. Note that wbinvd flushes the TLBs as + a side-effect */ + cr0 = read_cr0() | 0x40000000; + wbinvd(); + write_cr0(cr0); + wbinvd(); + + if (use_intel()) + /* Save MTRR state */ + rdmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi); + else + /* Cyrix ARRs - everything else were excluded at the top */ + ctxt->ccr3 = getCx86(CX86_CCR3); + } +} + +void set_mtrr_cache_disable(struct set_mtrr_context *ctxt) +{ + if (use_intel()) + /* Disable MTRRs, and set the default type to uncached */ + mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL, + ctxt->deftype_hi); + else if (is_cpu(CYRIX)) + /* Cyrix ARRs - everything else were excluded at the top */ + setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10); +} + +/* Restore the processor after a set_mtrr_prepare */ +void set_mtrr_done(struct set_mtrr_context *ctxt) +{ + if (use_intel() || is_cpu(CYRIX)) { + + /* Flush caches and TLBs */ + wbinvd(); + + /* Restore MTRRdefType */ + if (use_intel()) + /* Intel (P6) standard MTRRs */ + mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi); + else + /* Cyrix ARRs - everything else was excluded at the top */ + setCx86(CX86_CCR3, ctxt->ccr3); + + /* Enable caches */ + write_cr0(read_cr0() & 0xbfffffff); + + /* Restore value of CR4 */ + if ( cpu_has_pge ) + write_cr4(ctxt->cr4val); + } + /* Re-enable interrupts locally (if enabled previously) */ + local_irq_restore(ctxt->flags); +} + diff --git a/arch/x86/kernel/cpu/nexgen.c b/arch/x86/kernel/cpu/nexgen.c new file mode 100644 index 000000000000..961fbe1a748f --- /dev/null +++ b/arch/x86/kernel/cpu/nexgen.c @@ -0,0 +1,60 @@ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> +#include <asm/processor.h> + +#include "cpu.h" + +/* + * Detect a NexGen CPU running without BIOS hypercode new enough + * to have CPUID. (Thanks to Herbert Oppmann) + */ + +static int __cpuinit deep_magic_nexgen_probe(void) +{ + int ret; + + __asm__ __volatile__ ( + " movw $0x5555, %%ax\n" + " xorw %%dx,%%dx\n" + " movw $2, %%cx\n" + " divw %%cx\n" + " movl $0, %%eax\n" + " jnz 1f\n" + " movl $1, %%eax\n" + "1:\n" + : "=a" (ret) : : "cx", "dx" ); + return ret; +} + +static void __cpuinit init_nexgen(struct cpuinfo_x86 * c) +{ + c->x86_cache_size = 256; /* A few had 1 MB... */ +} + +static void __cpuinit nexgen_identify(struct cpuinfo_x86 * c) +{ + /* Detect NexGen with old hypercode */ + if ( deep_magic_nexgen_probe() ) { + strcpy(c->x86_vendor_id, "NexGenDriven"); + } +} + +static struct cpu_dev nexgen_cpu_dev __cpuinitdata = { + .c_vendor = "Nexgen", + .c_ident = { "NexGenDriven" }, + .c_models = { + { .vendor = X86_VENDOR_NEXGEN, + .family = 5, + .model_names = { [1] = "Nx586" } + }, + }, + .c_init = init_nexgen, + .c_identify = nexgen_identify, +}; + +int __init nexgen_init_cpu(void) +{ + cpu_devs[X86_VENDOR_NEXGEN] = &nexgen_cpu_dev; + return 0; +} diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c new file mode 100644 index 000000000000..93fecd4b03de --- /dev/null +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -0,0 +1,713 @@ +/* local apic based NMI watchdog for various CPUs. + This file also handles reservation of performance counters for coordination + with other users (like oprofile). + + Note that these events normally don't tick when the CPU idles. This means + the frequency varies with CPU load. + + Original code for K7/P6 written by Keith Owens */ + +#include <linux/percpu.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/bitops.h> +#include <linux/smp.h> +#include <linux/nmi.h> +#include <asm/apic.h> +#include <asm/intel_arch_perfmon.h> + +struct nmi_watchdog_ctlblk { + unsigned int cccr_msr; + unsigned int perfctr_msr; /* the MSR to reset in NMI handler */ + unsigned int evntsel_msr; /* the MSR to select the events to handle */ +}; + +/* Interface defining a CPU specific perfctr watchdog */ +struct wd_ops { + int (*reserve)(void); + void (*unreserve)(void); + int (*setup)(unsigned nmi_hz); + void (*rearm)(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz); + void (*stop)(void); + unsigned perfctr; + unsigned evntsel; + u64 checkbit; +}; + +static struct wd_ops *wd_ops; + +/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's + * offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now) + */ +#define NMI_MAX_COUNTER_BITS 66 + +/* perfctr_nmi_owner tracks the ownership of the perfctr registers: + * evtsel_nmi_owner tracks the ownership of the event selection + * - different performance counters/ event selection may be reserved for + * different subsystems this reservation system just tries to coordinate + * things a little + */ +static DECLARE_BITMAP(perfctr_nmi_owner, NMI_MAX_COUNTER_BITS); +static DECLARE_BITMAP(evntsel_nmi_owner, NMI_MAX_COUNTER_BITS); + +static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk); + +/* converts an msr to an appropriate reservation bit */ +static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr) +{ + /* returns the bit offset of the performance counter register */ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return (msr - MSR_K7_PERFCTR0); + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + return (msr - MSR_ARCH_PERFMON_PERFCTR0); + + switch (boot_cpu_data.x86) { + case 6: + return (msr - MSR_P6_PERFCTR0); + case 15: + return (msr - MSR_P4_BPU_PERFCTR0); + } + } + return 0; +} + +/* converts an msr to an appropriate reservation bit */ +/* returns the bit offset of the event selection register */ +static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr) +{ + /* returns the bit offset of the event selection register */ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + return (msr - MSR_K7_EVNTSEL0); + case X86_VENDOR_INTEL: + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) + return (msr - MSR_ARCH_PERFMON_EVENTSEL0); + + switch (boot_cpu_data.x86) { + case 6: + return (msr - MSR_P6_EVNTSEL0); + case 15: + return (msr - MSR_P4_BSU_ESCR0); + } + } + return 0; + +} + +/* checks for a bit availability (hack for oprofile) */ +int avail_to_resrv_perfctr_nmi_bit(unsigned int counter) +{ + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + return (!test_bit(counter, perfctr_nmi_owner)); +} + +/* checks the an msr for availability */ +int avail_to_resrv_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + return (!test_bit(counter, perfctr_nmi_owner)); +} + +int reserve_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + if (!test_and_set_bit(counter, perfctr_nmi_owner)) + return 1; + return 0; +} + +void release_perfctr_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_perfctr_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + clear_bit(counter, perfctr_nmi_owner); +} + +int reserve_evntsel_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_evntsel_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + if (!test_and_set_bit(counter, evntsel_nmi_owner)) + return 1; + return 0; +} + +void release_evntsel_nmi(unsigned int msr) +{ + unsigned int counter; + + counter = nmi_evntsel_msr_to_bit(msr); + BUG_ON(counter > NMI_MAX_COUNTER_BITS); + + clear_bit(counter, evntsel_nmi_owner); +} + +EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi); +EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit); +EXPORT_SYMBOL(reserve_perfctr_nmi); +EXPORT_SYMBOL(release_perfctr_nmi); +EXPORT_SYMBOL(reserve_evntsel_nmi); +EXPORT_SYMBOL(release_evntsel_nmi); + +void disable_lapic_nmi_watchdog(void) +{ + BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); + + if (atomic_read(&nmi_active) <= 0) + return; + + on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1); + wd_ops->unreserve(); + + BUG_ON(atomic_read(&nmi_active) != 0); +} + +void enable_lapic_nmi_watchdog(void) +{ + BUG_ON(nmi_watchdog != NMI_LOCAL_APIC); + + /* are we already enabled */ + if (atomic_read(&nmi_active) != 0) + return; + + /* are we lapic aware */ + if (!wd_ops) + return; + if (!wd_ops->reserve()) { + printk(KERN_ERR "NMI watchdog: cannot reserve perfctrs\n"); + return; + } + + on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1); + touch_nmi_watchdog(); +} + +/* + * Activate the NMI watchdog via the local APIC. + */ + +static unsigned int adjust_for_32bit_ctr(unsigned int hz) +{ + u64 counter_val; + unsigned int retval = hz; + + /* + * On Intel CPUs with P6/ARCH_PERFMON only 32 bits in the counter + * are writable, with higher bits sign extending from bit 31. + * So, we can only program the counter with 31 bit values and + * 32nd bit should be 1, for 33.. to be 1. + * Find the appropriate nmi_hz + */ + counter_val = (u64)cpu_khz * 1000; + do_div(counter_val, retval); + if (counter_val > 0x7fffffffULL) { + u64 count = (u64)cpu_khz * 1000; + do_div(count, 0x7fffffffUL); + retval = count + 1; + } + return retval; +} + +static void +write_watchdog_counter(unsigned int perfctr_msr, const char *descr, unsigned nmi_hz) +{ + u64 count = (u64)cpu_khz * 1000; + + do_div(count, nmi_hz); + if(descr) + Dprintk("setting %s to -0x%08Lx\n", descr, count); + wrmsrl(perfctr_msr, 0 - count); +} + +static void write_watchdog_counter32(unsigned int perfctr_msr, + const char *descr, unsigned nmi_hz) +{ + u64 count = (u64)cpu_khz * 1000; + + do_div(count, nmi_hz); + if(descr) + Dprintk("setting %s to -0x%08Lx\n", descr, count); + wrmsr(perfctr_msr, (u32)(-count), 0); +} + +/* AMD K7/K8/Family10h/Family11h support. AMD keeps this interface + nicely stable so there is not much variety */ + +#define K7_EVNTSEL_ENABLE (1 << 22) +#define K7_EVNTSEL_INT (1 << 20) +#define K7_EVNTSEL_OS (1 << 17) +#define K7_EVNTSEL_USR (1 << 16) +#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76 +#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING + +static int setup_k7_watchdog(unsigned nmi_hz) +{ + unsigned int perfctr_msr, evntsel_msr; + unsigned int evntsel; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + perfctr_msr = wd_ops->perfctr; + evntsel_msr = wd_ops->evntsel; + + wrmsrl(perfctr_msr, 0UL); + + evntsel = K7_EVNTSEL_INT + | K7_EVNTSEL_OS + | K7_EVNTSEL_USR + | K7_NMI_EVENT; + + /* setup the timer */ + wrmsr(evntsel_msr, evntsel, 0); + write_watchdog_counter(perfctr_msr, "K7_PERFCTR0",nmi_hz); + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= K7_EVNTSEL_ENABLE; + wrmsr(evntsel_msr, evntsel, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; //unused + return 1; +} + +static void single_msr_stop_watchdog(void) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + wrmsr(wd->evntsel_msr, 0, 0); +} + +static int single_msr_reserve(void) +{ + if (!reserve_perfctr_nmi(wd_ops->perfctr)) + return 0; + + if (!reserve_evntsel_nmi(wd_ops->evntsel)) { + release_perfctr_nmi(wd_ops->perfctr); + return 0; + } + return 1; +} + +static void single_msr_unreserve(void) +{ + release_evntsel_nmi(wd_ops->evntsel); + release_perfctr_nmi(wd_ops->perfctr); +} + +static void single_msr_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz) +{ + /* start the cycle over again */ + write_watchdog_counter(wd->perfctr_msr, NULL, nmi_hz); +} + +static struct wd_ops k7_wd_ops = { + .reserve = single_msr_reserve, + .unreserve = single_msr_unreserve, + .setup = setup_k7_watchdog, + .rearm = single_msr_rearm, + .stop = single_msr_stop_watchdog, + .perfctr = MSR_K7_PERFCTR0, + .evntsel = MSR_K7_EVNTSEL0, + .checkbit = 1ULL<<47, +}; + +/* Intel Model 6 (PPro+,P2,P3,P-M,Core1) */ + +#define P6_EVNTSEL0_ENABLE (1 << 22) +#define P6_EVNTSEL_INT (1 << 20) +#define P6_EVNTSEL_OS (1 << 17) +#define P6_EVNTSEL_USR (1 << 16) +#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79 +#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED + +static int setup_p6_watchdog(unsigned nmi_hz) +{ + unsigned int perfctr_msr, evntsel_msr; + unsigned int evntsel; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + perfctr_msr = wd_ops->perfctr; + evntsel_msr = wd_ops->evntsel; + + /* KVM doesn't implement this MSR */ + if (wrmsr_safe(perfctr_msr, 0, 0) < 0) + return 0; + + evntsel = P6_EVNTSEL_INT + | P6_EVNTSEL_OS + | P6_EVNTSEL_USR + | P6_NMI_EVENT; + + /* setup the timer */ + wrmsr(evntsel_msr, evntsel, 0); + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0",nmi_hz); + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= P6_EVNTSEL0_ENABLE; + wrmsr(evntsel_msr, evntsel, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; //unused + return 1; +} + +static void p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz) +{ + /* P6 based Pentium M need to re-unmask + * the apic vector but it doesn't hurt + * other P6 variant. + * ArchPerfom/Core Duo also needs this */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + /* P6/ARCH_PERFMON has 32 bit counter write */ + write_watchdog_counter32(wd->perfctr_msr, NULL,nmi_hz); +} + +static struct wd_ops p6_wd_ops = { + .reserve = single_msr_reserve, + .unreserve = single_msr_unreserve, + .setup = setup_p6_watchdog, + .rearm = p6_rearm, + .stop = single_msr_stop_watchdog, + .perfctr = MSR_P6_PERFCTR0, + .evntsel = MSR_P6_EVNTSEL0, + .checkbit = 1ULL<<39, +}; + +/* Intel P4 performance counters. By far the most complicated of all. */ + +#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7) +#define P4_ESCR_EVENT_SELECT(N) ((N)<<25) +#define P4_ESCR_OS (1<<3) +#define P4_ESCR_USR (1<<2) +#define P4_CCCR_OVF_PMI0 (1<<26) +#define P4_CCCR_OVF_PMI1 (1<<27) +#define P4_CCCR_THRESHOLD(N) ((N)<<20) +#define P4_CCCR_COMPLEMENT (1<<19) +#define P4_CCCR_COMPARE (1<<18) +#define P4_CCCR_REQUIRED (3<<16) +#define P4_CCCR_ESCR_SELECT(N) ((N)<<13) +#define P4_CCCR_ENABLE (1<<12) +#define P4_CCCR_OVF (1<<31) + +/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter + CRU_ESCR0 (with any non-null event selector) through a complemented + max threshold. [IA32-Vol3, Section 14.9.9] */ + +static int setup_p4_watchdog(unsigned nmi_hz) +{ + unsigned int perfctr_msr, evntsel_msr, cccr_msr; + unsigned int evntsel, cccr_val; + unsigned int misc_enable, dummy; + unsigned int ht_num; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy); + if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL)) + return 0; + +#ifdef CONFIG_SMP + /* detect which hyperthread we are on */ + if (smp_num_siblings == 2) { + unsigned int ebx, apicid; + + ebx = cpuid_ebx(1); + apicid = (ebx >> 24) & 0xff; + ht_num = apicid & 1; + } else +#endif + ht_num = 0; + + /* performance counters are shared resources + * assign each hyperthread its own set + * (re-use the ESCR0 register, seems safe + * and keeps the cccr_val the same) + */ + if (!ht_num) { + /* logical cpu 0 */ + perfctr_msr = MSR_P4_IQ_PERFCTR0; + evntsel_msr = MSR_P4_CRU_ESCR0; + cccr_msr = MSR_P4_IQ_CCCR0; + cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4); + } else { + /* logical cpu 1 */ + perfctr_msr = MSR_P4_IQ_PERFCTR1; + evntsel_msr = MSR_P4_CRU_ESCR0; + cccr_msr = MSR_P4_IQ_CCCR1; + cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4); + } + + evntsel = P4_ESCR_EVENT_SELECT(0x3F) + | P4_ESCR_OS + | P4_ESCR_USR; + + cccr_val |= P4_CCCR_THRESHOLD(15) + | P4_CCCR_COMPLEMENT + | P4_CCCR_COMPARE + | P4_CCCR_REQUIRED; + + wrmsr(evntsel_msr, evntsel, 0); + wrmsr(cccr_msr, cccr_val, 0); + write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0", nmi_hz); + apic_write(APIC_LVTPC, APIC_DM_NMI); + cccr_val |= P4_CCCR_ENABLE; + wrmsr(cccr_msr, cccr_val, 0); + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = cccr_msr; + return 1; +} + +static void stop_p4_watchdog(void) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + wrmsr(wd->cccr_msr, 0, 0); + wrmsr(wd->evntsel_msr, 0, 0); +} + +static int p4_reserve(void) +{ + if (!reserve_perfctr_nmi(MSR_P4_IQ_PERFCTR0)) + return 0; +#ifdef CONFIG_SMP + if (smp_num_siblings > 1 && !reserve_perfctr_nmi(MSR_P4_IQ_PERFCTR1)) + goto fail1; +#endif + if (!reserve_evntsel_nmi(MSR_P4_CRU_ESCR0)) + goto fail2; + /* RED-PEN why is ESCR1 not reserved here? */ + return 1; + fail2: +#ifdef CONFIG_SMP + if (smp_num_siblings > 1) + release_perfctr_nmi(MSR_P4_IQ_PERFCTR1); + fail1: +#endif + release_perfctr_nmi(MSR_P4_IQ_PERFCTR0); + return 0; +} + +static void p4_unreserve(void) +{ +#ifdef CONFIG_SMP + if (smp_num_siblings > 1) + release_perfctr_nmi(MSR_P4_IQ_PERFCTR1); +#endif + release_evntsel_nmi(MSR_P4_CRU_ESCR0); + release_perfctr_nmi(MSR_P4_IQ_PERFCTR0); +} + +static void p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz) +{ + unsigned dummy; + /* + * P4 quirks: + * - An overflown perfctr will assert its interrupt + * until the OVF flag in its CCCR is cleared. + * - LVTPC is masked on interrupt and must be + * unmasked by the LVTPC handler. + */ + rdmsrl(wd->cccr_msr, dummy); + dummy &= ~P4_CCCR_OVF; + wrmsrl(wd->cccr_msr, dummy); + apic_write(APIC_LVTPC, APIC_DM_NMI); + /* start the cycle over again */ + write_watchdog_counter(wd->perfctr_msr, NULL, nmi_hz); +} + +static struct wd_ops p4_wd_ops = { + .reserve = p4_reserve, + .unreserve = p4_unreserve, + .setup = setup_p4_watchdog, + .rearm = p4_rearm, + .stop = stop_p4_watchdog, + /* RED-PEN this is wrong for the other sibling */ + .perfctr = MSR_P4_BPU_PERFCTR0, + .evntsel = MSR_P4_BSU_ESCR0, + .checkbit = 1ULL<<39, +}; + +/* Watchdog using the Intel architected PerfMon. Used for Core2 and hopefully + all future Intel CPUs. */ + +#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL +#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK + +static int setup_intel_arch_watchdog(unsigned nmi_hz) +{ + unsigned int ebx; + union cpuid10_eax eax; + unsigned int unused; + unsigned int perfctr_msr, evntsel_msr; + unsigned int evntsel; + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + + /* + * Check whether the Architectural PerfMon supports + * Unhalted Core Cycles Event or not. + * NOTE: Corresponding bit = 0 in ebx indicates event present. + */ + cpuid(10, &(eax.full), &ebx, &unused, &unused); + if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) || + (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT)) + return 0; + + perfctr_msr = wd_ops->perfctr; + evntsel_msr = wd_ops->evntsel; + + wrmsrl(perfctr_msr, 0UL); + + evntsel = ARCH_PERFMON_EVENTSEL_INT + | ARCH_PERFMON_EVENTSEL_OS + | ARCH_PERFMON_EVENTSEL_USR + | ARCH_PERFMON_NMI_EVENT_SEL + | ARCH_PERFMON_NMI_EVENT_UMASK; + + /* setup the timer */ + wrmsr(evntsel_msr, evntsel, 0); + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0", nmi_hz); + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsr(evntsel_msr, evntsel, 0); + + wd->perfctr_msr = perfctr_msr; + wd->evntsel_msr = evntsel_msr; + wd->cccr_msr = 0; //unused + wd_ops->checkbit = 1ULL << (eax.split.bit_width - 1); + return 1; +} + +static struct wd_ops intel_arch_wd_ops = { + .reserve = single_msr_reserve, + .unreserve = single_msr_unreserve, + .setup = setup_intel_arch_watchdog, + .rearm = p6_rearm, + .stop = single_msr_stop_watchdog, + .perfctr = MSR_ARCH_PERFMON_PERFCTR1, + .evntsel = MSR_ARCH_PERFMON_EVENTSEL1, +}; + +static struct wd_ops coreduo_wd_ops = { + .reserve = single_msr_reserve, + .unreserve = single_msr_unreserve, + .setup = setup_intel_arch_watchdog, + .rearm = p6_rearm, + .stop = single_msr_stop_watchdog, + .perfctr = MSR_ARCH_PERFMON_PERFCTR0, + .evntsel = MSR_ARCH_PERFMON_EVENTSEL0, +}; + +static void probe_nmi_watchdog(void) +{ + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_AMD: + if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15 && + boot_cpu_data.x86 != 16) + return; + wd_ops = &k7_wd_ops; + break; + case X86_VENDOR_INTEL: + /* Work around Core Duo (Yonah) errata AE49 where perfctr1 + doesn't have a working enable bit. */ + if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) { + wd_ops = &coreduo_wd_ops; + break; + } + if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) { + wd_ops = &intel_arch_wd_ops; + break; + } + switch (boot_cpu_data.x86) { + case 6: + if (boot_cpu_data.x86_model > 0xd) + return; + + wd_ops = &p6_wd_ops; + break; + case 15: + if (boot_cpu_data.x86_model > 0x4) + return; + + wd_ops = &p4_wd_ops; + break; + default: + return; + } + break; + } +} + +/* Interface to nmi.c */ + +int lapic_watchdog_init(unsigned nmi_hz) +{ + if (!wd_ops) { + probe_nmi_watchdog(); + if (!wd_ops) + return -1; + + if (!wd_ops->reserve()) { + printk(KERN_ERR + "NMI watchdog: cannot reserve perfctrs\n"); + return -1; + } + } + + if (!(wd_ops->setup(nmi_hz))) { + printk(KERN_ERR "Cannot setup NMI watchdog on CPU %d\n", + raw_smp_processor_id()); + return -1; + } + + return 0; +} + +void lapic_watchdog_stop(void) +{ + if (wd_ops) + wd_ops->stop(); +} + +unsigned lapic_adjust_nmi_hz(unsigned hz) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + if (wd->perfctr_msr == MSR_P6_PERFCTR0 || + wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR1) + hz = adjust_for_32bit_ctr(hz); + return hz; +} + +int lapic_wd_event(unsigned nmi_hz) +{ + struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); + u64 ctr; + rdmsrl(wd->perfctr_msr, ctr); + if (ctr & wd_ops->checkbit) { /* perfctr still running? */ + return 0; + } + wd_ops->rearm(wd, nmi_hz); + return 1; +} + +int lapic_watchdog_ok(void) +{ + return wd_ops != NULL; +} diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c new file mode 100644 index 000000000000..1e31b6caffb1 --- /dev/null +++ b/arch/x86/kernel/cpu/proc.c @@ -0,0 +1,192 @@ +#include <linux/smp.h> +#include <linux/timex.h> +#include <linux/string.h> +#include <asm/semaphore.h> +#include <linux/seq_file.h> +#include <linux/cpufreq.h> + +/* + * Get CPU information for use by the procfs. + */ +static int show_cpuinfo(struct seq_file *m, void *v) +{ + /* + * These flag bits must match the definitions in <asm/cpufeature.h>. + * NULL means this bit is undefined or reserved; either way it doesn't + * have meaning as far as Linux is concerned. Note that it's important + * to realize there is a difference between this table and CPUID -- if + * applications want to get the raw CPUID data, they should access + * /dev/cpu/<cpu_nr>/cpuid instead. + */ + static const char * const x86_cap_flags[] = { + /* Intel-defined */ + "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce", + "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov", + "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx", + "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe", + + /* AMD-defined */ + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, + NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL, + NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", + "3dnowext", "3dnow", + + /* Transmeta-defined */ + "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* Other (Linux-defined) */ + "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", + NULL, NULL, NULL, NULL, + "constant_tsc", "up", NULL, "arch_perfmon", + "pebs", "bts", NULL, "sync_rdtsc", + "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* Intel-defined (#2) */ + "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", + "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* VIA/Cyrix/Centaur-defined */ + NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en", + "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* AMD-defined (#2) */ + "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", + "altmovcr8", "abm", "sse4a", + "misalignsse", "3dnowprefetch", + "osvw", "ibs", NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* Auxiliary (Linux-defined) */ + "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + }; + static const char * const x86_power_flags[] = { + "ts", /* temperature sensor */ + "fid", /* frequency id control */ + "vid", /* voltage id control */ + "ttp", /* thermal trip */ + "tm", + "stc", + "100mhzsteps", + "hwpstate", + "", /* constant_tsc - moved to flags */ + /* nothing */ + }; + struct cpuinfo_x86 *c = v; + int i, n = c - cpu_data; + int fpu_exception; + +#ifdef CONFIG_SMP + if (!cpu_online(n)) + return 0; +#endif + seq_printf(m, "processor\t: %d\n" + "vendor_id\t: %s\n" + "cpu family\t: %d\n" + "model\t\t: %d\n" + "model name\t: %s\n", + n, + c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown", + c->x86, + c->x86_model, + c->x86_model_id[0] ? c->x86_model_id : "unknown"); + + if (c->x86_mask || c->cpuid_level >= 0) + seq_printf(m, "stepping\t: %d\n", c->x86_mask); + else + seq_printf(m, "stepping\t: unknown\n"); + + if ( cpu_has(c, X86_FEATURE_TSC) ) { + unsigned int freq = cpufreq_quick_get(n); + if (!freq) + freq = cpu_khz; + seq_printf(m, "cpu MHz\t\t: %u.%03u\n", + freq / 1000, (freq % 1000)); + } + + /* Cache size */ + if (c->x86_cache_size >= 0) + seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size); +#ifdef CONFIG_X86_HT + if (c->x86_max_cores * smp_num_siblings > 1) { + seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); + seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[n])); + seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); + seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); + } +#endif + + /* We use exception 16 if we have hardware math and we've either seen it or the CPU claims it is internal */ + fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu); + seq_printf(m, "fdiv_bug\t: %s\n" + "hlt_bug\t\t: %s\n" + "f00f_bug\t: %s\n" + "coma_bug\t: %s\n" + "fpu\t\t: %s\n" + "fpu_exception\t: %s\n" + "cpuid level\t: %d\n" + "wp\t\t: %s\n" + "flags\t\t:", + c->fdiv_bug ? "yes" : "no", + c->hlt_works_ok ? "no" : "yes", + c->f00f_bug ? "yes" : "no", + c->coma_bug ? "yes" : "no", + c->hard_math ? "yes" : "no", + fpu_exception ? "yes" : "no", + c->cpuid_level, + c->wp_works_ok ? "yes" : "no"); + + for ( i = 0 ; i < 32*NCAPINTS ; i++ ) + if ( test_bit(i, c->x86_capability) && + x86_cap_flags[i] != NULL ) + seq_printf(m, " %s", x86_cap_flags[i]); + + for (i = 0; i < 32; i++) + if (c->x86_power & (1 << i)) { + if (i < ARRAY_SIZE(x86_power_flags) && + x86_power_flags[i]) + seq_printf(m, "%s%s", + x86_power_flags[i][0]?" ":"", + x86_power_flags[i]); + else + seq_printf(m, " [%d]", i); + } + + seq_printf(m, "\nbogomips\t: %lu.%02lu\n", + c->loops_per_jiffy/(500000/HZ), + (c->loops_per_jiffy/(5000/HZ)) % 100); + seq_printf(m, "clflush size\t: %u\n\n", c->x86_clflush_size); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < NR_CPUS ? cpu_data + *pos : NULL; +} +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} +static void c_stop(struct seq_file *m, void *v) +{ +} +struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c new file mode 100644 index 000000000000..200fb3f9ebfb --- /dev/null +++ b/arch/x86/kernel/cpu/transmeta.c @@ -0,0 +1,116 @@ +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <asm/processor.h> +#include <asm/msr.h> +#include "cpu.h" + +static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) +{ + unsigned int cap_mask, uk, max, dummy; + unsigned int cms_rev1, cms_rev2; + unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev; + char cpu_info[65]; + + get_model_name(c); /* Same as AMD/Cyrix */ + display_cacheinfo(c); + + /* Print CMS and CPU revision */ + max = cpuid_eax(0x80860000); + cpu_rev = 0; + if ( max >= 0x80860001 ) { + cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags); + if (cpu_rev != 0x02000000) { + printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n", + (cpu_rev >> 24) & 0xff, + (cpu_rev >> 16) & 0xff, + (cpu_rev >> 8) & 0xff, + cpu_rev & 0xff, + cpu_freq); + } + } + if ( max >= 0x80860002 ) { + cpuid(0x80860002, &new_cpu_rev, &cms_rev1, &cms_rev2, &dummy); + if (cpu_rev == 0x02000000) { + printk(KERN_INFO "CPU: Processor revision %08X, %u MHz\n", + new_cpu_rev, cpu_freq); + } + printk(KERN_INFO "CPU: Code Morphing Software revision %u.%u.%u-%u-%u\n", + (cms_rev1 >> 24) & 0xff, + (cms_rev1 >> 16) & 0xff, + (cms_rev1 >> 8) & 0xff, + cms_rev1 & 0xff, + cms_rev2); + } + if ( max >= 0x80860006 ) { + cpuid(0x80860003, + (void *)&cpu_info[0], + (void *)&cpu_info[4], + (void *)&cpu_info[8], + (void *)&cpu_info[12]); + cpuid(0x80860004, + (void *)&cpu_info[16], + (void *)&cpu_info[20], + (void *)&cpu_info[24], + (void *)&cpu_info[28]); + cpuid(0x80860005, + (void *)&cpu_info[32], + (void *)&cpu_info[36], + (void *)&cpu_info[40], + (void *)&cpu_info[44]); + cpuid(0x80860006, + (void *)&cpu_info[48], + (void *)&cpu_info[52], + (void *)&cpu_info[56], + (void *)&cpu_info[60]); + cpu_info[64] = '\0'; + printk(KERN_INFO "CPU: %s\n", cpu_info); + } + + /* Unhide possibly hidden capability flags */ + rdmsr(0x80860004, cap_mask, uk); + wrmsr(0x80860004, ~0, uk); + c->x86_capability[0] = cpuid_edx(0x00000001); + wrmsr(0x80860004, cap_mask, uk); + + /* All Transmeta CPUs have a constant TSC */ + set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability); + + /* If we can run i686 user-space code, call us an i686 */ +#define USER686 ((1 << X86_FEATURE_TSC)|\ + (1 << X86_FEATURE_CX8)|\ + (1 << X86_FEATURE_CMOV)) + if (c->x86 == 5 && (c->x86_capability[0] & USER686) == USER686) + c->x86 = 6; + +#ifdef CONFIG_SYSCTL + /* randomize_va_space slows us down enormously; + it probably triggers retranslation of x86->native bytecode */ + randomize_va_space = 0; +#endif +} + +static void __cpuinit transmeta_identify(struct cpuinfo_x86 * c) +{ + u32 xlvl; + + /* Transmeta-defined flags: level 0x80860001 */ + xlvl = cpuid_eax(0x80860000); + if ( (xlvl & 0xffff0000) == 0x80860000 ) { + if ( xlvl >= 0x80860001 ) + c->x86_capability[2] = cpuid_edx(0x80860001); + } +} + +static struct cpu_dev transmeta_cpu_dev __cpuinitdata = { + .c_vendor = "Transmeta", + .c_ident = { "GenuineTMx86", "TransmetaCPU" }, + .c_init = init_transmeta, + .c_identify = transmeta_identify, +}; + +int __init transmeta_init_cpu(void) +{ + cpu_devs[X86_VENDOR_TRANSMETA] = &transmeta_cpu_dev; + return 0; +} diff --git a/arch/x86/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c new file mode 100644 index 000000000000..a7a4e75bdcd7 --- /dev/null +++ b/arch/x86/kernel/cpu/umc.c @@ -0,0 +1,26 @@ +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/processor.h> +#include "cpu.h" + +/* UMC chips appear to be only either 386 or 486, so no special init takes place. + */ + +static struct cpu_dev umc_cpu_dev __cpuinitdata = { + .c_vendor = "UMC", + .c_ident = { "UMC UMC UMC" }, + .c_models = { + { .vendor = X86_VENDOR_UMC, .family = 4, .model_names = + { + [1] = "U5D", + [2] = "U5S", + } + }, + }, +}; + +int __init umc_init_cpu(void) +{ + cpu_devs[X86_VENDOR_UMC] = &umc_cpu_dev; + return 0; +} diff --git a/arch/x86/kernel/cpufreq/Kconfig b/arch/x86/kernel/cpufreq/Kconfig new file mode 100644 index 000000000000..a3fd51926cbd --- /dev/null +++ b/arch/x86/kernel/cpufreq/Kconfig @@ -0,0 +1,108 @@ +# +# CPU Frequency scaling +# + +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" + +if CPU_FREQ + +comment "CPUFreq processor drivers" + +config X86_POWERNOW_K8 + tristate "AMD Opteron/Athlon64 PowerNow!" + select CPU_FREQ_TABLE + help + This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + + To compile this driver as a module, choose M here: the + module will be called powernow-k8. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_POWERNOW_K8_ACPI + bool + depends on X86_POWERNOW_K8 && ACPI_PROCESSOR + depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) + default y + +config X86_SPEEDSTEP_CENTRINO + tristate "Intel Enhanced SpeedStep (deprecated)" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This is deprecated and this functionality is now merged into + acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of + speedstep_centrino. + This adds the CPUFreq driver for Enhanced SpeedStep enabled + mobile CPUs. This means Intel Pentium M (Centrino) CPUs + or 64bit enabled Intel Xeons. + + To compile this driver as a module, choose M here: the + module will be called speedstep-centrino. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +config X86_ACPI_CPUFREQ + tristate "ACPI Processor P-States driver" + select CPU_FREQ_TABLE + depends on ACPI_PROCESSOR + help + This driver adds a CPUFreq driver which utilizes the ACPI + Processor Performance States. + This driver also supports Intel Enhanced Speedstep. + + To compile this driver as a module, choose M here: the + module will be called acpi-cpufreq. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + +comment "shared options" + +config X86_ACPI_CPUFREQ_PROC_INTF + bool "/proc/acpi/processor/../performance interface (deprecated)" + depends on PROC_FS + depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI + help + This enables the deprecated /proc/acpi/processor/../performance + interface. While it is helpful for debugging, the generic, + cross-architecture cpufreq interfaces should be used. + + If in doubt, say N. + +config X86_P4_CLOCKMOD + tristate "Intel Pentium 4 clock modulation" + depends on EMBEDDED + select CPU_FREQ_TABLE + help + This adds the clock modulation driver for Intel Pentium 4 / XEON + processors. When enabled it will lower CPU temperature by skipping + clocks. + + This driver should be only used in exceptional + circumstances when very low power is needed because it causes severe + slowdowns and noticeable latencies. Normally Speedstep should be used + instead. + + To compile this driver as a module, choose M here: the + module will be called p4-clockmod. + + For details, take a look at <file:Documentation/cpu-freq/>. + + Unless you are absolutely sure say N. + + +config X86_SPEEDSTEP_LIB + tristate + default X86_P4_CLOCKMOD + +endif + +endmenu diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c new file mode 100644 index 000000000000..5c2faa10e9fa --- /dev/null +++ b/arch/x86/kernel/cpuid.c @@ -0,0 +1,242 @@ +/* ----------------------------------------------------------------------- * + * + * Copyright 2000 H. Peter Anvin - All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, + * USA; either version 2 of the License, or (at your option) any later + * version; incorporated herein by reference. + * + * ----------------------------------------------------------------------- */ + +/* + * cpuid.c + * + * x86 CPUID access device + * + * This device is accessed by lseek() to the appropriate CPUID level + * and then read in chunks of 16 bytes. A larger size means multiple + * reads of consecutive levels. + * + * This driver uses /dev/cpu/%d/cpuid where %d is the minor number, and on + * an SMP box will direct the access to CPU %d. + */ + +#include <linux/module.h> + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/fcntl.h> +#include <linux/init.h> +#include <linux/poll.h> +#include <linux/smp.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/smp_lock.h> +#include <linux/device.h> +#include <linux/cpu.h> +#include <linux/notifier.h> + +#include <asm/processor.h> +#include <asm/msr.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +static struct class *cpuid_class; + +#ifdef CONFIG_SMP + +struct cpuid_command { + u32 reg; + u32 *data; +}; + +static void cpuid_smp_cpuid(void *cmd_block) +{ + struct cpuid_command *cmd = (struct cpuid_command *)cmd_block; + + cpuid(cmd->reg, &cmd->data[0], &cmd->data[1], &cmd->data[2], + &cmd->data[3]); +} + +static inline void do_cpuid(int cpu, u32 reg, u32 * data) +{ + struct cpuid_command cmd; + + preempt_disable(); + if (cpu == smp_processor_id()) { + cpuid(reg, &data[0], &data[1], &data[2], &data[3]); + } else { + cmd.reg = reg; + cmd.data = data; + + smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1, 1); + } + preempt_enable(); +} +#else /* ! CONFIG_SMP */ + +static inline void do_cpuid(int cpu, u32 reg, u32 * data) +{ + cpuid(reg, &data[0], &data[1], &data[2], &data[3]); +} + +#endif /* ! CONFIG_SMP */ + +static loff_t cpuid_seek(struct file *file, loff_t offset, int orig) +{ + loff_t ret; + + lock_kernel(); + + switch (orig) { + case 0: + file->f_pos = offset; + ret = file->f_pos; + break; + case 1: + file->f_pos += offset; + ret = file->f_pos; + break; + default: + ret = -EINVAL; + } + + unlock_kernel(); + return ret; +} + +static ssize_t cpuid_read(struct file *file, char __user *buf, + size_t count, loff_t * ppos) +{ + char __user *tmp = buf; + u32 data[4]; + u32 reg = *ppos; + int cpu = iminor(file->f_path.dentry->d_inode); + + if (count % 16) + return -EINVAL; /* Invalid chunk size */ + + for (; count; count -= 16) { + do_cpuid(cpu, reg, data); + if (copy_to_user(tmp, &data, 16)) + return -EFAULT; + tmp += 16; + *ppos = reg++; + } + + return tmp - buf; +} + +static int cpuid_open(struct inode *inode, struct file *file) +{ + unsigned int cpu = iminor(file->f_path.dentry->d_inode); + struct cpuinfo_x86 *c = &(cpu_data)[cpu]; + + if (cpu >= NR_CPUS || !cpu_online(cpu)) + return -ENXIO; /* No such CPU */ + if (c->cpuid_level < 0) + return -EIO; /* CPUID not supported */ + + return 0; +} + +/* + * File operations we support + */ +static const struct file_operations cpuid_fops = { + .owner = THIS_MODULE, + .llseek = cpuid_seek, + .read = cpuid_read, + .open = cpuid_open, +}; + +static int cpuid_device_create(int i) +{ + int err = 0; + struct device *dev; + + dev = device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), "cpu%d",i); + if (IS_ERR(dev)) + err = PTR_ERR(dev); + return err; +} + +static int cpuid_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + cpuid_device_create(cpu); + break; + case CPU_DEAD: + case CPU_DEAD_FROZEN: + device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata cpuid_class_cpu_notifier = +{ + .notifier_call = cpuid_class_cpu_callback, +}; + +static int __init cpuid_init(void) +{ + int i, err = 0; + i = 0; + + if (register_chrdev(CPUID_MAJOR, "cpu/cpuid", &cpuid_fops)) { + printk(KERN_ERR "cpuid: unable to get major %d for cpuid\n", + CPUID_MAJOR); + err = -EBUSY; + goto out; + } + cpuid_class = class_create(THIS_MODULE, "cpuid"); + if (IS_ERR(cpuid_class)) { + err = PTR_ERR(cpuid_class); + goto out_chrdev; + } + for_each_online_cpu(i) { + err = cpuid_device_create(i); + if (err != 0) + goto out_class; + } + register_hotcpu_notifier(&cpuid_class_cpu_notifier); + + err = 0; + goto out; + +out_class: + i = 0; + for_each_online_cpu(i) { + device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, i)); + } + class_destroy(cpuid_class); +out_chrdev: + unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); +out: + return err; +} + +static void __exit cpuid_exit(void) +{ + int cpu = 0; + + for_each_online_cpu(cpu) + device_destroy(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); + class_destroy(cpuid_class); + unregister_chrdev(CPUID_MAJOR, "cpu/cpuid"); + unregister_hotcpu_notifier(&cpuid_class_cpu_notifier); +} + +module_init(cpuid_init); +module_exit(cpuid_exit); + +MODULE_AUTHOR("H. Peter Anvin <hpa@zytor.com>"); +MODULE_DESCRIPTION("x86 generic CPUID driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/crash_32.c b/arch/x86/kernel/crash_32.c new file mode 100644 index 000000000000..53589d1b1a05 --- /dev/null +++ b/arch/x86/kernel/crash_32.c @@ -0,0 +1,137 @@ +/* + * Architecture specific (i386) functions for kexec based crash dumps. + * + * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) + * + * Copyright (C) IBM Corporation, 2004. All rights reserved. + * + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/reboot.h> +#include <linux/kexec.h> +#include <linux/delay.h> +#include <linux/elf.h> +#include <linux/elfcore.h> + +#include <asm/processor.h> +#include <asm/hardirq.h> +#include <asm/nmi.h> +#include <asm/hw_irq.h> +#include <asm/apic.h> +#include <linux/kdebug.h> +#include <asm/smp.h> + +#include <mach_ipi.h> + + +/* This keeps a track of which one is crashing cpu. */ +static int crashing_cpu; + +#if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC) +static atomic_t waiting_for_crash_ipi; + +static int crash_nmi_callback(struct notifier_block *self, + unsigned long val, void *data) +{ + struct pt_regs *regs; + struct pt_regs fixed_regs; + int cpu; + + if (val != DIE_NMI_IPI) + return NOTIFY_OK; + + regs = ((struct die_args *)data)->regs; + cpu = raw_smp_processor_id(); + + /* Don't do anything if this handler is invoked on crashing cpu. + * Otherwise, system will completely hang. Crashing cpu can get + * an NMI if system was initially booted with nmi_watchdog parameter. + */ + if (cpu == crashing_cpu) + return NOTIFY_STOP; + local_irq_disable(); + + if (!user_mode_vm(regs)) { + crash_fixup_ss_esp(&fixed_regs, regs); + regs = &fixed_regs; + } + crash_save_cpu(regs, cpu); + disable_local_APIC(); + atomic_dec(&waiting_for_crash_ipi); + /* Assume hlt works */ + halt(); + for (;;) + cpu_relax(); + + return 1; +} + +static void smp_send_nmi_allbutself(void) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(safe_smp_processor_id(), mask); + if (!cpus_empty(mask)) + send_IPI_mask(mask, NMI_VECTOR); +} + +static struct notifier_block crash_nmi_nb = { + .notifier_call = crash_nmi_callback, +}; + +static void nmi_shootdown_cpus(void) +{ + unsigned long msecs; + + atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); + /* Would it be better to replace the trap vector here? */ + if (register_die_notifier(&crash_nmi_nb)) + return; /* return what? */ + /* Ensure the new callback function is set before sending + * out the NMI + */ + wmb(); + + smp_send_nmi_allbutself(); + + msecs = 1000; /* Wait at most a second for the other cpus to stop */ + while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) { + mdelay(1); + msecs--; + } + + /* Leave the nmi callback set */ + disable_local_APIC(); +} +#else +static void nmi_shootdown_cpus(void) +{ + /* There are no cpus to shootdown */ +} +#endif + +void machine_crash_shutdown(struct pt_regs *regs) +{ + /* This function is only called after the system + * has panicked or is otherwise in a critical state. + * The minimum amount of code to allow a kexec'd kernel + * to run successfully needs to happen here. + * + * In practice this means shooting down the other cpus in + * an SMP system. + */ + /* The kernel is broken so disable interrupts */ + local_irq_disable(); + + /* Make a note of crashing cpu. Will be used in NMI callback.*/ + crashing_cpu = safe_smp_processor_id(); + nmi_shootdown_cpus(); + lapic_shutdown(); +#if defined(CONFIG_X86_IO_APIC) + disable_IO_APIC(); +#endif + crash_save_cpu(regs, safe_smp_processor_id()); +} diff --git a/arch/x86/kernel/crash_64.c b/arch/x86/kernel/crash_64.c new file mode 100644 index 000000000000..13432a1ae904 --- /dev/null +++ b/arch/x86/kernel/crash_64.c @@ -0,0 +1,135 @@ +/* + * Architecture specific (x86_64) functions for kexec based crash dumps. + * + * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) + * + * Copyright (C) IBM Corporation, 2004. All rights reserved. + * + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/irq.h> +#include <linux/reboot.h> +#include <linux/kexec.h> +#include <linux/delay.h> +#include <linux/elf.h> +#include <linux/elfcore.h> +#include <linux/kdebug.h> + +#include <asm/processor.h> +#include <asm/hardirq.h> +#include <asm/nmi.h> +#include <asm/hw_irq.h> +#include <asm/mach_apic.h> + +/* This keeps a track of which one is crashing cpu. */ +static int crashing_cpu; + +#ifdef CONFIG_SMP +static atomic_t waiting_for_crash_ipi; + +static int crash_nmi_callback(struct notifier_block *self, + unsigned long val, void *data) +{ + struct pt_regs *regs; + int cpu; + + if (val != DIE_NMI_IPI) + return NOTIFY_OK; + + regs = ((struct die_args *)data)->regs; + cpu = raw_smp_processor_id(); + + /* + * Don't do anything if this handler is invoked on crashing cpu. + * Otherwise, system will completely hang. Crashing cpu can get + * an NMI if system was initially booted with nmi_watchdog parameter. + */ + if (cpu == crashing_cpu) + return NOTIFY_STOP; + local_irq_disable(); + + crash_save_cpu(regs, cpu); + disable_local_APIC(); + atomic_dec(&waiting_for_crash_ipi); + /* Assume hlt works */ + for(;;) + halt(); + + return 1; +} + +static void smp_send_nmi_allbutself(void) +{ + send_IPI_allbutself(NMI_VECTOR); +} + +/* + * This code is a best effort heuristic to get the + * other cpus to stop executing. So races with + * cpu hotplug shouldn't matter. + */ + +static struct notifier_block crash_nmi_nb = { + .notifier_call = crash_nmi_callback, +}; + +static void nmi_shootdown_cpus(void) +{ + unsigned long msecs; + + atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); + if (register_die_notifier(&crash_nmi_nb)) + return; /* return what? */ + + /* + * Ensure the new callback function is set before sending + * out the NMI + */ + wmb(); + + smp_send_nmi_allbutself(); + + msecs = 1000; /* Wait at most a second for the other cpus to stop */ + while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) { + mdelay(1); + msecs--; + } + /* Leave the nmi callback set */ + disable_local_APIC(); +} +#else +static void nmi_shootdown_cpus(void) +{ + /* There are no cpus to shootdown */ +} +#endif + +void machine_crash_shutdown(struct pt_regs *regs) +{ + /* + * This function is only called after the system + * has panicked or is otherwise in a critical state. + * The minimum amount of code to allow a kexec'd kernel + * to run successfully needs to happen here. + * + * In practice this means shooting down the other cpus in + * an SMP system. + */ + /* The kernel is broken so disable interrupts */ + local_irq_disable(); + + /* Make a note of crashing cpu. Will be used in NMI callback.*/ + crashing_cpu = smp_processor_id(); + nmi_shootdown_cpus(); + + if(cpu_has_apic) + disable_local_APIC(); + + disable_IO_APIC(); + + crash_save_cpu(regs, smp_processor_id()); +} diff --git a/arch/x86/kernel/crash_dump_32.c b/arch/x86/kernel/crash_dump_32.c new file mode 100644 index 000000000000..3f532df488bc --- /dev/null +++ b/arch/x86/kernel/crash_dump_32.c @@ -0,0 +1,74 @@ +/* + * kernel/crash_dump.c - Memory preserving reboot related code. + * + * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) + * Copyright (C) IBM Corporation, 2004. All rights reserved + */ + +#include <linux/errno.h> +#include <linux/highmem.h> +#include <linux/crash_dump.h> + +#include <asm/uaccess.h> + +static void *kdump_buf_page; + +/** + * copy_oldmem_page - copy one page from "oldmem" + * @pfn: page frame number to be copied + * @buf: target memory address for the copy; this can be in kernel address + * space or user address space (see @userbuf) + * @csize: number of bytes to copy + * @offset: offset in bytes into the page (based on pfn) to begin the copy + * @userbuf: if set, @buf is in user address space, use copy_to_user(), + * otherwise @buf is in kernel address space, use memcpy(). + * + * Copy a page from "oldmem". For this page, there is no pte mapped + * in the current kernel. We stitch up a pte, similar to kmap_atomic. + * + * Calling copy_to_user() in atomic context is not desirable. Hence first + * copying the data to a pre-allocated kernel page and then copying to user + * space in non-atomic context. + */ +ssize_t copy_oldmem_page(unsigned long pfn, char *buf, + size_t csize, unsigned long offset, int userbuf) +{ + void *vaddr; + + if (!csize) + return 0; + + vaddr = kmap_atomic_pfn(pfn, KM_PTE0); + + if (!userbuf) { + memcpy(buf, (vaddr + offset), csize); + kunmap_atomic(vaddr, KM_PTE0); + } else { + if (!kdump_buf_page) { + printk(KERN_WARNING "Kdump: Kdump buffer page not" + " allocated\n"); + return -EFAULT; + } + copy_page(kdump_buf_page, vaddr); + kunmap_atomic(vaddr, KM_PTE0); + if (copy_to_user(buf, (kdump_buf_page + offset), csize)) + return -EFAULT; + } + + return csize; +} + +static int __init kdump_buf_page_init(void) +{ + int ret = 0; + + kdump_buf_page = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!kdump_buf_page) { + printk(KERN_WARNING "Kdump: Failed to allocate kdump buffer" + " page\n"); + ret = -ENOMEM; + } + + return ret; +} +arch_initcall(kdump_buf_page_init); diff --git a/arch/x86/kernel/crash_dump_64.c b/arch/x86/kernel/crash_dump_64.c new file mode 100644 index 000000000000..942deac4d43a --- /dev/null +++ b/arch/x86/kernel/crash_dump_64.c @@ -0,0 +1,47 @@ +/* + * kernel/crash_dump.c - Memory preserving reboot related code. + * + * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) + * Copyright (C) IBM Corporation, 2004. All rights reserved + */ + +#include <linux/errno.h> +#include <linux/crash_dump.h> + +#include <asm/uaccess.h> +#include <asm/io.h> + +/** + * copy_oldmem_page - copy one page from "oldmem" + * @pfn: page frame number to be copied + * @buf: target memory address for the copy; this can be in kernel address + * space or user address space (see @userbuf) + * @csize: number of bytes to copy + * @offset: offset in bytes into the page (based on pfn) to begin the copy + * @userbuf: if set, @buf is in user address space, use copy_to_user(), + * otherwise @buf is in kernel address space, use memcpy(). + * + * Copy a page from "oldmem". For this page, there is no pte mapped + * in the current kernel. We stitch up a pte, similar to kmap_atomic. + */ +ssize_t copy_oldmem_page(unsigned long pfn, char *buf, + size_t csize, unsigned long offset, int userbuf) +{ + void *vaddr; + + if (!csize) + return 0; + + vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE); + + if (userbuf) { + if (copy_to_user(buf, (vaddr + offset), csize)) { + iounmap(vaddr); + return -EFAULT; + } + } else + memcpy(buf, (vaddr + offset), csize); + + iounmap(vaddr); + return csize; +} diff --git a/arch/x86/kernel/doublefault_32.c b/arch/x86/kernel/doublefault_32.c new file mode 100644 index 000000000000..40978af630e7 --- /dev/null +++ b/arch/x86/kernel/doublefault_32.c @@ -0,0 +1,70 @@ +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/init_task.h> +#include <linux/fs.h> + +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/desc.h> + +#define DOUBLEFAULT_STACKSIZE (1024) +static unsigned long doublefault_stack[DOUBLEFAULT_STACKSIZE]; +#define STACK_START (unsigned long)(doublefault_stack+DOUBLEFAULT_STACKSIZE) + +#define ptr_ok(x) ((x) > PAGE_OFFSET && (x) < PAGE_OFFSET + MAXMEM) + +static void doublefault_fn(void) +{ + struct Xgt_desc_struct gdt_desc = {0, 0}; + unsigned long gdt, tss; + + store_gdt(&gdt_desc); + gdt = gdt_desc.address; + + printk(KERN_EMERG "PANIC: double fault, gdt at %08lx [%d bytes]\n", gdt, gdt_desc.size); + + if (ptr_ok(gdt)) { + gdt += GDT_ENTRY_TSS << 3; + tss = *(u16 *)(gdt+2); + tss += *(u8 *)(gdt+4) << 16; + tss += *(u8 *)(gdt+7) << 24; + printk(KERN_EMERG "double fault, tss at %08lx\n", tss); + + if (ptr_ok(tss)) { + struct i386_hw_tss *t = (struct i386_hw_tss *)tss; + + printk(KERN_EMERG "eip = %08lx, esp = %08lx\n", t->eip, t->esp); + + printk(KERN_EMERG "eax = %08lx, ebx = %08lx, ecx = %08lx, edx = %08lx\n", + t->eax, t->ebx, t->ecx, t->edx); + printk(KERN_EMERG "esi = %08lx, edi = %08lx\n", + t->esi, t->edi); + } + } + + for (;;) + cpu_relax(); +} + +struct tss_struct doublefault_tss __cacheline_aligned = { + .x86_tss = { + .esp0 = STACK_START, + .ss0 = __KERNEL_DS, + .ldt = 0, + .io_bitmap_base = INVALID_IO_BITMAP_OFFSET, + + .eip = (unsigned long) doublefault_fn, + /* 0x2 bit is always set */ + .eflags = X86_EFLAGS_SF | 0x2, + .esp = STACK_START, + .es = __USER_DS, + .cs = __KERNEL_CS, + .ss = __KERNEL_DS, + .ds = __USER_DS, + .fs = __KERNEL_PERCPU, + + .__cr3 = __pa(swapper_pg_dir) + } +}; diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c new file mode 100644 index 000000000000..3c86b979a40a --- /dev/null +++ b/arch/x86/kernel/e820_32.c @@ -0,0 +1,944 @@ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/ioport.h> +#include <linux/string.h> +#include <linux/kexec.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/efi.h> +#include <linux/pfn.h> +#include <linux/uaccess.h> +#include <linux/suspend.h> + +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/e820.h> +#include <asm/setup.h> + +#ifdef CONFIG_EFI +int efi_enabled = 0; +EXPORT_SYMBOL(efi_enabled); +#endif + +struct e820map e820; +struct change_member { + struct e820entry *pbios; /* pointer to original bios entry */ + unsigned long long addr; /* address for this change point */ +}; +static struct change_member change_point_list[2*E820MAX] __initdata; +static struct change_member *change_point[2*E820MAX] __initdata; +static struct e820entry *overlap_list[E820MAX] __initdata; +static struct e820entry new_bios[E820MAX] __initdata; +/* For PCI or other memory-mapped resources */ +unsigned long pci_mem_start = 0x10000000; +#ifdef CONFIG_PCI +EXPORT_SYMBOL(pci_mem_start); +#endif +extern int user_defined_memmap; +struct resource data_resource = { + .name = "Kernel data", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +struct resource code_resource = { + .name = "Kernel code", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +static struct resource system_rom_resource = { + .name = "System ROM", + .start = 0xf0000, + .end = 0xfffff, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}; + +static struct resource extension_rom_resource = { + .name = "Extension ROM", + .start = 0xe0000, + .end = 0xeffff, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}; + +static struct resource adapter_rom_resources[] = { { + .name = "Adapter ROM", + .start = 0xc8000, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +} }; + +static struct resource video_rom_resource = { + .name = "Video ROM", + .start = 0xc0000, + .end = 0xc7fff, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}; + +static struct resource video_ram_resource = { + .name = "Video RAM area", + .start = 0xa0000, + .end = 0xbffff, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +static struct resource standard_io_resources[] = { { + .name = "dma1", + .start = 0x0000, + .end = 0x001f, + .flags = IORESOURCE_BUSY | IORESOURCE_IO +}, { + .name = "pic1", + .start = 0x0020, + .end = 0x0021, + .flags = IORESOURCE_BUSY | IORESOURCE_IO +}, { + .name = "timer0", + .start = 0x0040, + .end = 0x0043, + .flags = IORESOURCE_BUSY | IORESOURCE_IO +}, { + .name = "timer1", + .start = 0x0050, + .end = 0x0053, + .flags = IORESOURCE_BUSY | IORESOURCE_IO +}, { + .name = "keyboard", + .start = 0x0060, + .end = 0x006f, + .flags = IORESOURCE_BUSY | IORESOURCE_IO +}, { + .name = "dma page reg", + .start = 0x0080, + .end = 0x008f, + .flags = IORESOURCE_BUSY | IORESOURCE_IO +}, { + .name = "pic2", + .start = 0x00a0, + .end = 0x00a1, + .flags = IORESOURCE_BUSY | IORESOURCE_IO +}, { + .name = "dma2", + .start = 0x00c0, + .end = 0x00df, + .flags = IORESOURCE_BUSY | IORESOURCE_IO +}, { + .name = "fpu", + .start = 0x00f0, + .end = 0x00ff, + .flags = IORESOURCE_BUSY | IORESOURCE_IO +} }; + +#define ROMSIGNATURE 0xaa55 + +static int __init romsignature(const unsigned char *rom) +{ + const unsigned short * const ptr = (const unsigned short *)rom; + unsigned short sig; + + return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE; +} + +static int __init romchecksum(const unsigned char *rom, unsigned long length) +{ + unsigned char sum, c; + + for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--) + sum += c; + return !length && !sum; +} + +static void __init probe_roms(void) +{ + const unsigned char *rom; + unsigned long start, length, upper; + unsigned char c; + int i; + + /* video rom */ + upper = adapter_rom_resources[0].start; + for (start = video_rom_resource.start; start < upper; start += 2048) { + rom = isa_bus_to_virt(start); + if (!romsignature(rom)) + continue; + + video_rom_resource.start = start; + + if (probe_kernel_address(rom + 2, c) != 0) + continue; + + /* 0 < length <= 0x7f * 512, historically */ + length = c * 512; + + /* if checksum okay, trust length byte */ + if (length && romchecksum(rom, length)) + video_rom_resource.end = start + length - 1; + + request_resource(&iomem_resource, &video_rom_resource); + break; + } + + start = (video_rom_resource.end + 1 + 2047) & ~2047UL; + if (start < upper) + start = upper; + + /* system rom */ + request_resource(&iomem_resource, &system_rom_resource); + upper = system_rom_resource.start; + + /* check for extension rom (ignore length byte!) */ + rom = isa_bus_to_virt(extension_rom_resource.start); + if (romsignature(rom)) { + length = extension_rom_resource.end - extension_rom_resource.start + 1; + if (romchecksum(rom, length)) { + request_resource(&iomem_resource, &extension_rom_resource); + upper = extension_rom_resource.start; + } + } + + /* check for adapter roms on 2k boundaries */ + for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) { + rom = isa_bus_to_virt(start); + if (!romsignature(rom)) + continue; + + if (probe_kernel_address(rom + 2, c) != 0) + continue; + + /* 0 < length <= 0x7f * 512, historically */ + length = c * 512; + + /* but accept any length that fits if checksum okay */ + if (!length || start + length > upper || !romchecksum(rom, length)) + continue; + + adapter_rom_resources[i].start = start; + adapter_rom_resources[i].end = start + length - 1; + request_resource(&iomem_resource, &adapter_rom_resources[i]); + + start = adapter_rom_resources[i++].end & ~2047UL; + } +} + +/* + * Request address space for all standard RAM and ROM resources + * and also for regions reported as reserved by the e820. + */ +static void __init +legacy_init_iomem_resources(struct resource *code_resource, struct resource *data_resource) +{ + int i; + + probe_roms(); + for (i = 0; i < e820.nr_map; i++) { + struct resource *res; +#ifndef CONFIG_RESOURCES_64BIT + if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL) + continue; +#endif + res = kzalloc(sizeof(struct resource), GFP_ATOMIC); + switch (e820.map[i].type) { + case E820_RAM: res->name = "System RAM"; break; + case E820_ACPI: res->name = "ACPI Tables"; break; + case E820_NVS: res->name = "ACPI Non-volatile Storage"; break; + default: res->name = "reserved"; + } + res->start = e820.map[i].addr; + res->end = res->start + e820.map[i].size - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (request_resource(&iomem_resource, res)) { + kfree(res); + continue; + } + if (e820.map[i].type == E820_RAM) { + /* + * We don't know which RAM region contains kernel data, + * so we try it repeatedly and let the resource manager + * test it. + */ + request_resource(res, code_resource); + request_resource(res, data_resource); +#ifdef CONFIG_KEXEC + request_resource(res, &crashk_res); +#endif + } + } +} + +/* + * Request address space for all standard resources + * + * This is called just before pcibios_init(), which is also a + * subsys_initcall, but is linked in later (in arch/i386/pci/common.c). + */ +static int __init request_standard_resources(void) +{ + int i; + + printk("Setting up standard PCI resources\n"); + if (efi_enabled) + efi_initialize_iomem_resources(&code_resource, &data_resource); + else + legacy_init_iomem_resources(&code_resource, &data_resource); + + /* EFI systems may still have VGA */ + request_resource(&iomem_resource, &video_ram_resource); + + /* request I/O space for devices used on all i[345]86 PCs */ + for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) + request_resource(&ioport_resource, &standard_io_resources[i]); + return 0; +} + +subsys_initcall(request_standard_resources); + +#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION) +/** + * e820_mark_nosave_regions - Find the ranges of physical addresses that do not + * correspond to e820 RAM areas and mark the corresponding pages as nosave for + * hibernation. + * + * This function requires the e820 map to be sorted and without any + * overlapping entries and assumes the first e820 area to be RAM. + */ +void __init e820_mark_nosave_regions(void) +{ + int i; + unsigned long pfn; + + pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size); + for (i = 1; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (pfn < PFN_UP(ei->addr)) + register_nosave_region(pfn, PFN_UP(ei->addr)); + + pfn = PFN_DOWN(ei->addr + ei->size); + if (ei->type != E820_RAM) + register_nosave_region(PFN_UP(ei->addr), pfn); + + if (pfn >= max_low_pfn) + break; + } +} +#endif + +void __init add_memory_region(unsigned long long start, + unsigned long long size, int type) +{ + int x; + + if (!efi_enabled) { + x = e820.nr_map; + + if (x == E820MAX) { + printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); + return; + } + + e820.map[x].addr = start; + e820.map[x].size = size; + e820.map[x].type = type; + e820.nr_map++; + } +} /* add_memory_region */ + +/* + * Sanitize the BIOS e820 map. + * + * Some e820 responses include overlapping entries. The following + * replaces the original e820 map with a new one, removing overlaps. + * + */ +int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map) +{ + struct change_member *change_tmp; + unsigned long current_type, last_type; + unsigned long long last_addr; + int chgidx, still_changing; + int overlap_entries; + int new_bios_entry; + int old_nr, new_nr, chg_nr; + int i; + + /* + Visually we're performing the following (1,2,3,4 = memory types)... + + Sample memory map (w/overlaps): + ____22__________________ + ______________________4_ + ____1111________________ + _44_____________________ + 11111111________________ + ____________________33__ + ___________44___________ + __________33333_________ + ______________22________ + ___________________2222_ + _________111111111______ + _____________________11_ + _________________4______ + + Sanitized equivalent (no overlap): + 1_______________________ + _44_____________________ + ___1____________________ + ____22__________________ + ______11________________ + _________1______________ + __________3_____________ + ___________44___________ + _____________33_________ + _______________2________ + ________________1_______ + _________________4______ + ___________________2____ + ____________________33__ + ______________________4_ + */ + /* if there's only one memory region, don't bother */ + if (*pnr_map < 2) { + return -1; + } + + old_nr = *pnr_map; + + /* bail out if we find any unreasonable addresses in bios map */ + for (i=0; i<old_nr; i++) + if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) { + return -1; + } + + /* create pointers for initial change-point information (for sorting) */ + for (i=0; i < 2*old_nr; i++) + change_point[i] = &change_point_list[i]; + + /* record all known change-points (starting and ending addresses), + omitting those that are for empty memory regions */ + chgidx = 0; + for (i=0; i < old_nr; i++) { + if (biosmap[i].size != 0) { + change_point[chgidx]->addr = biosmap[i].addr; + change_point[chgidx++]->pbios = &biosmap[i]; + change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size; + change_point[chgidx++]->pbios = &biosmap[i]; + } + } + chg_nr = chgidx; /* true number of change-points */ + + /* sort change-point list by memory addresses (low -> high) */ + still_changing = 1; + while (still_changing) { + still_changing = 0; + for (i=1; i < chg_nr; i++) { + /* if <current_addr> > <last_addr>, swap */ + /* or, if current=<start_addr> & last=<end_addr>, swap */ + if ((change_point[i]->addr < change_point[i-1]->addr) || + ((change_point[i]->addr == change_point[i-1]->addr) && + (change_point[i]->addr == change_point[i]->pbios->addr) && + (change_point[i-1]->addr != change_point[i-1]->pbios->addr)) + ) + { + change_tmp = change_point[i]; + change_point[i] = change_point[i-1]; + change_point[i-1] = change_tmp; + still_changing=1; + } + } + } + + /* create a new bios memory map, removing overlaps */ + overlap_entries=0; /* number of entries in the overlap table */ + new_bios_entry=0; /* index for creating new bios map entries */ + last_type = 0; /* start with undefined memory type */ + last_addr = 0; /* start with 0 as last starting address */ + /* loop through change-points, determining affect on the new bios map */ + for (chgidx=0; chgidx < chg_nr; chgidx++) + { + /* keep track of all overlapping bios entries */ + if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr) + { + /* add map entry to overlap list (> 1 entry implies an overlap) */ + overlap_list[overlap_entries++]=change_point[chgidx]->pbios; + } + else + { + /* remove entry from list (order independent, so swap with last) */ + for (i=0; i<overlap_entries; i++) + { + if (overlap_list[i] == change_point[chgidx]->pbios) + overlap_list[i] = overlap_list[overlap_entries-1]; + } + overlap_entries--; + } + /* if there are overlapping entries, decide which "type" to use */ + /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */ + current_type = 0; + for (i=0; i<overlap_entries; i++) + if (overlap_list[i]->type > current_type) + current_type = overlap_list[i]->type; + /* continue building up new bios map based on this information */ + if (current_type != last_type) { + if (last_type != 0) { + new_bios[new_bios_entry].size = + change_point[chgidx]->addr - last_addr; + /* move forward only if the new size was non-zero */ + if (new_bios[new_bios_entry].size != 0) + if (++new_bios_entry >= E820MAX) + break; /* no more space left for new bios entries */ + } + if (current_type != 0) { + new_bios[new_bios_entry].addr = change_point[chgidx]->addr; + new_bios[new_bios_entry].type = current_type; + last_addr=change_point[chgidx]->addr; + } + last_type = current_type; + } + } + new_nr = new_bios_entry; /* retain count for new bios entries */ + + /* copy new bios mapping into original location */ + memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry)); + *pnr_map = new_nr; + + return 0; +} + +/* + * Copy the BIOS e820 map into a safe place. + * + * Sanity-check it while we're at it.. + * + * If we're lucky and live on a modern system, the setup code + * will have given us a memory map that we can use to properly + * set up memory. If we aren't, we'll fake a memory map. + * + * We check to see that the memory map contains at least 2 elements + * before we'll use it, because the detection code in setup.S may + * not be perfect and most every PC known to man has two memory + * regions: one from 0 to 640k, and one from 1mb up. (The IBM + * thinkpad 560x, for example, does not cooperate with the memory + * detection code.) + */ +int __init copy_e820_map(struct e820entry * biosmap, int nr_map) +{ + /* Only one memory region (or negative)? Ignore it */ + if (nr_map < 2) + return -1; + + do { + unsigned long long start = biosmap->addr; + unsigned long long size = biosmap->size; + unsigned long long end = start + size; + unsigned long type = biosmap->type; + + /* Overflow in 64 bits? Ignore the memory map. */ + if (start > end) + return -1; + + /* + * Some BIOSes claim RAM in the 640k - 1M region. + * Not right. Fix it up. + */ + if (type == E820_RAM) { + if (start < 0x100000ULL && end > 0xA0000ULL) { + if (start < 0xA0000ULL) + add_memory_region(start, 0xA0000ULL-start, type); + if (end <= 0x100000ULL) + continue; + start = 0x100000ULL; + size = end - start; + } + } + add_memory_region(start, size, type); + } while (biosmap++,--nr_map); + return 0; +} + +/* + * Callback for efi_memory_walk. + */ +static int __init +efi_find_max_pfn(unsigned long start, unsigned long end, void *arg) +{ + unsigned long *max_pfn = arg, pfn; + + if (start < end) { + pfn = PFN_UP(end -1); + if (pfn > *max_pfn) + *max_pfn = pfn; + } + return 0; +} + +static int __init +efi_memory_present_wrapper(unsigned long start, unsigned long end, void *arg) +{ + memory_present(0, PFN_UP(start), PFN_DOWN(end)); + return 0; +} + +/* + * Find the highest page frame number we have available + */ +void __init find_max_pfn(void) +{ + int i; + + max_pfn = 0; + if (efi_enabled) { + efi_memmap_walk(efi_find_max_pfn, &max_pfn); + efi_memmap_walk(efi_memory_present_wrapper, NULL); + return; + } + + for (i = 0; i < e820.nr_map; i++) { + unsigned long start, end; + /* RAM? */ + if (e820.map[i].type != E820_RAM) + continue; + start = PFN_UP(e820.map[i].addr); + end = PFN_DOWN(e820.map[i].addr + e820.map[i].size); + if (start >= end) + continue; + if (end > max_pfn) + max_pfn = end; + memory_present(0, start, end); + } +} + +/* + * Free all available memory for boot time allocation. Used + * as a callback function by efi_memory_walk() + */ + +static int __init +free_available_memory(unsigned long start, unsigned long end, void *arg) +{ + /* check max_low_pfn */ + if (start >= (max_low_pfn << PAGE_SHIFT)) + return 0; + if (end >= (max_low_pfn << PAGE_SHIFT)) + end = max_low_pfn << PAGE_SHIFT; + if (start < end) + free_bootmem(start, end - start); + + return 0; +} +/* + * Register fully available low RAM pages with the bootmem allocator. + */ +void __init register_bootmem_low_pages(unsigned long max_low_pfn) +{ + int i; + + if (efi_enabled) { + efi_memmap_walk(free_available_memory, NULL); + return; + } + for (i = 0; i < e820.nr_map; i++) { + unsigned long curr_pfn, last_pfn, size; + /* + * Reserve usable low memory + */ + if (e820.map[i].type != E820_RAM) + continue; + /* + * We are rounding up the start address of usable memory: + */ + curr_pfn = PFN_UP(e820.map[i].addr); + if (curr_pfn >= max_low_pfn) + continue; + /* + * ... and at the end of the usable range downwards: + */ + last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size); + + if (last_pfn > max_low_pfn) + last_pfn = max_low_pfn; + + /* + * .. finally, did all the rounding and playing + * around just make the area go away? + */ + if (last_pfn <= curr_pfn) + continue; + + size = last_pfn - curr_pfn; + free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size)); + } +} + +void __init e820_register_memory(void) +{ + unsigned long gapstart, gapsize, round; + unsigned long long last; + int i; + + /* + * Search for the bigest gap in the low 32 bits of the e820 + * memory space. + */ + last = 0x100000000ull; + gapstart = 0x10000000; + gapsize = 0x400000; + i = e820.nr_map; + while (--i >= 0) { + unsigned long long start = e820.map[i].addr; + unsigned long long end = start + e820.map[i].size; + + /* + * Since "last" is at most 4GB, we know we'll + * fit in 32 bits if this condition is true + */ + if (last > end) { + unsigned long gap = last - end; + + if (gap > gapsize) { + gapsize = gap; + gapstart = end; + } + } + if (start < last) + last = start; + } + + /* + * See how much we want to round up: start off with + * rounding to the next 1MB area. + */ + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; + + printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n", + pci_mem_start, gapstart, gapsize); +} + +void __init print_memory_map(char *who) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + printk(" %s: %016Lx - %016Lx ", who, + e820.map[i].addr, + e820.map[i].addr + e820.map[i].size); + switch (e820.map[i].type) { + case E820_RAM: printk("(usable)\n"); + break; + case E820_RESERVED: + printk("(reserved)\n"); + break; + case E820_ACPI: + printk("(ACPI data)\n"); + break; + case E820_NVS: + printk("(ACPI NVS)\n"); + break; + default: printk("type %u\n", e820.map[i].type); + break; + } + } +} + +static __init __always_inline void efi_limit_regions(unsigned long long size) +{ + unsigned long long current_addr = 0; + efi_memory_desc_t *md, *next_md; + void *p, *p1; + int i, j; + + j = 0; + p1 = memmap.map; + for (p = p1, i = 0; p < memmap.map_end; p += memmap.desc_size, i++) { + md = p; + next_md = p1; + current_addr = md->phys_addr + + PFN_PHYS(md->num_pages); + if (is_available_memory(md)) { + if (md->phys_addr >= size) continue; + memcpy(next_md, md, memmap.desc_size); + if (current_addr >= size) { + next_md->num_pages -= + PFN_UP(current_addr-size); + } + p1 += memmap.desc_size; + next_md = p1; + j++; + } else if ((md->attribute & EFI_MEMORY_RUNTIME) == + EFI_MEMORY_RUNTIME) { + /* In order to make runtime services + * available we have to include runtime + * memory regions in memory map */ + memcpy(next_md, md, memmap.desc_size); + p1 += memmap.desc_size; + next_md = p1; + j++; + } + } + memmap.nr_map = j; + memmap.map_end = memmap.map + + (memmap.nr_map * memmap.desc_size); +} + +void __init limit_regions(unsigned long long size) +{ + unsigned long long current_addr; + int i; + + print_memory_map("limit_regions start"); + if (efi_enabled) { + efi_limit_regions(size); + return; + } + for (i = 0; i < e820.nr_map; i++) { + current_addr = e820.map[i].addr + e820.map[i].size; + if (current_addr < size) + continue; + + if (e820.map[i].type != E820_RAM) + continue; + + if (e820.map[i].addr >= size) { + /* + * This region starts past the end of the + * requested size, skip it completely. + */ + e820.nr_map = i; + } else { + e820.nr_map = i + 1; + e820.map[i].size -= current_addr - size; + } + print_memory_map("limit_regions endfor"); + return; + } + print_memory_map("limit_regions endfunc"); +} + +/* + * This function checks if any part of the range <start,end> is mapped + * with type. + */ +int +e820_any_mapped(u64 start, u64 end, unsigned type) +{ + int i; + for (i = 0; i < e820.nr_map; i++) { + const struct e820entry *ei = &e820.map[i]; + if (type && ei->type != type) + continue; + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + return 1; + } + return 0; +} +EXPORT_SYMBOL_GPL(e820_any_mapped); + + /* + * This function checks if the entire range <start,end> is mapped with type. + * + * Note: this function only works correct if the e820 table is sorted and + * not-overlapping, which is the case + */ +int __init +e820_all_mapped(unsigned long s, unsigned long e, unsigned type) +{ + u64 start = s; + u64 end = e; + int i; + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + if (type && ei->type != type) + continue; + /* is the region (part) in overlap with the current region ?*/ + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + /* if the region is at the beginning of <start,end> we move + * start to the end of the region since it's ok until there + */ + if (ei->addr <= start) + start = ei->addr + ei->size; + /* if start is now at or beyond end, we're done, full + * coverage */ + if (start >= end) + return 1; /* we're done */ + } + return 0; +} + +static int __init parse_memmap(char *arg) +{ + if (!arg) + return -EINVAL; + + if (strcmp(arg, "exactmap") == 0) { +#ifdef CONFIG_CRASH_DUMP + /* If we are doing a crash dump, we + * still need to know the real mem + * size before original memory map is + * reset. + */ + find_max_pfn(); + saved_max_pfn = max_pfn; +#endif + e820.nr_map = 0; + user_defined_memmap = 1; + } else { + /* If the user specifies memory size, we + * limit the BIOS-provided memory map to + * that size. exactmap can be used to specify + * the exact map. mem=number can be used to + * trim the existing memory map. + */ + unsigned long long start_at, mem_size; + + mem_size = memparse(arg, &arg); + if (*arg == '@') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, E820_RAM); + } else if (*arg == '#') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, E820_ACPI); + } else if (*arg == '$') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, E820_RESERVED); + } else { + limit_regions(mem_size); + user_defined_memmap = 1; + } + } + return 0; +} +early_param("memmap", parse_memmap); diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c new file mode 100644 index 000000000000..0f4d5e209e9b --- /dev/null +++ b/arch/x86/kernel/e820_64.c @@ -0,0 +1,725 @@ +/* + * Handle the memory map. + * The functions here do the job until bootmem takes over. + * + * Getting sanitize_e820_map() in sync with i386 version by applying change: + * - Provisions for empty E820 memory regions (reported by certain BIOSes). + * Alex Achenbach <xela@slit.de>, December 2002. + * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> + * + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/bootmem.h> +#include <linux/ioport.h> +#include <linux/string.h> +#include <linux/kexec.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/suspend.h> +#include <linux/pfn.h> + +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/e820.h> +#include <asm/proto.h> +#include <asm/bootsetup.h> +#include <asm/sections.h> + +struct e820map e820; + +/* + * PFN of last memory page. + */ +unsigned long end_pfn; +EXPORT_SYMBOL(end_pfn); + +/* + * end_pfn only includes RAM, while end_pfn_map includes all e820 entries. + * The direct mapping extends to end_pfn_map, so that we can directly access + * apertures, ACPI and other tables without having to play with fixmaps. + */ +unsigned long end_pfn_map; + +/* + * Last pfn which the user wants to use. + */ +static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; + +extern struct resource code_resource, data_resource; + +/* Check for some hardcoded bad areas that early boot is not allowed to touch */ +static inline int bad_addr(unsigned long *addrp, unsigned long size) +{ + unsigned long addr = *addrp, last = addr + size; + + /* various gunk below that needed for SMP startup */ + if (addr < 0x8000) { + *addrp = PAGE_ALIGN(0x8000); + return 1; + } + + /* direct mapping tables of the kernel */ + if (last >= table_start<<PAGE_SHIFT && addr < table_end<<PAGE_SHIFT) { + *addrp = PAGE_ALIGN(table_end << PAGE_SHIFT); + return 1; + } + + /* initrd */ +#ifdef CONFIG_BLK_DEV_INITRD + if (LOADER_TYPE && INITRD_START && last >= INITRD_START && + addr < INITRD_START+INITRD_SIZE) { + *addrp = PAGE_ALIGN(INITRD_START + INITRD_SIZE); + return 1; + } +#endif + /* kernel code */ + if (last >= __pa_symbol(&_text) && addr < __pa_symbol(&_end)) { + *addrp = PAGE_ALIGN(__pa_symbol(&_end)); + return 1; + } + + if (last >= ebda_addr && addr < ebda_addr + ebda_size) { + *addrp = PAGE_ALIGN(ebda_addr + ebda_size); + return 1; + } + +#ifdef CONFIG_NUMA + /* NUMA memory to node map */ + if (last >= nodemap_addr && addr < nodemap_addr + nodemap_size) { + *addrp = nodemap_addr + nodemap_size; + return 1; + } +#endif + /* XXX ramdisk image here? */ + return 0; +} + +/* + * This function checks if any part of the range <start,end> is mapped + * with type. + */ +int +e820_any_mapped(unsigned long start, unsigned long end, unsigned type) +{ + int i; + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + if (type && ei->type != type) + continue; + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + return 1; + } + return 0; +} +EXPORT_SYMBOL_GPL(e820_any_mapped); + +/* + * This function checks if the entire range <start,end> is mapped with type. + * + * Note: this function only works correct if the e820 table is sorted and + * not-overlapping, which is the case + */ +int __init e820_all_mapped(unsigned long start, unsigned long end, unsigned type) +{ + int i; + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + if (type && ei->type != type) + continue; + /* is the region (part) in overlap with the current region ?*/ + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + + /* if the region is at the beginning of <start,end> we move + * start to the end of the region since it's ok until there + */ + if (ei->addr <= start) + start = ei->addr + ei->size; + /* if start is now at or beyond end, we're done, full coverage */ + if (start >= end) + return 1; /* we're done */ + } + return 0; +} + +/* + * Find a free area in a specific range. + */ +unsigned long __init find_e820_area(unsigned long start, unsigned long end, unsigned size) +{ + int i; + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + unsigned long addr = ei->addr, last; + if (ei->type != E820_RAM) + continue; + if (addr < start) + addr = start; + if (addr > ei->addr + ei->size) + continue; + while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size) + ; + last = PAGE_ALIGN(addr) + size; + if (last > ei->addr + ei->size) + continue; + if (last > end) + continue; + return addr; + } + return -1UL; +} + +/* + * Find the highest page frame number we have available + */ +unsigned long __init e820_end_of_ram(void) +{ + unsigned long end_pfn = 0; + end_pfn = find_max_pfn_with_active_regions(); + + if (end_pfn > end_pfn_map) + end_pfn_map = end_pfn; + if (end_pfn_map > MAXMEM>>PAGE_SHIFT) + end_pfn_map = MAXMEM>>PAGE_SHIFT; + if (end_pfn > end_user_pfn) + end_pfn = end_user_pfn; + if (end_pfn > end_pfn_map) + end_pfn = end_pfn_map; + + printk("end_pfn_map = %lu\n", end_pfn_map); + return end_pfn; +} + +/* + * Mark e820 reserved areas as busy for the resource manager. + */ +void __init e820_reserve_resources(void) +{ + int i; + for (i = 0; i < e820.nr_map; i++) { + struct resource *res; + res = alloc_bootmem_low(sizeof(struct resource)); + switch (e820.map[i].type) { + case E820_RAM: res->name = "System RAM"; break; + case E820_ACPI: res->name = "ACPI Tables"; break; + case E820_NVS: res->name = "ACPI Non-volatile Storage"; break; + default: res->name = "reserved"; + } + res->start = e820.map[i].addr; + res->end = res->start + e820.map[i].size - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + request_resource(&iomem_resource, res); + if (e820.map[i].type == E820_RAM) { + /* + * We don't know which RAM region contains kernel data, + * so we try it repeatedly and let the resource manager + * test it. + */ + request_resource(res, &code_resource); + request_resource(res, &data_resource); +#ifdef CONFIG_KEXEC + request_resource(res, &crashk_res); +#endif + } + } +} + +/* + * Find the ranges of physical addresses that do not correspond to + * e820 RAM areas and mark the corresponding pages as nosave for software + * suspend and suspend to RAM. + * + * This function requires the e820 map to be sorted and without any + * overlapping entries and assumes the first e820 area to be RAM. + */ +void __init e820_mark_nosave_regions(void) +{ + int i; + unsigned long paddr; + + paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE); + for (i = 1; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (paddr < ei->addr) + register_nosave_region(PFN_DOWN(paddr), + PFN_UP(ei->addr)); + + paddr = round_down(ei->addr + ei->size, PAGE_SIZE); + if (ei->type != E820_RAM) + register_nosave_region(PFN_UP(ei->addr), + PFN_DOWN(paddr)); + + if (paddr >= (end_pfn << PAGE_SHIFT)) + break; + } +} + +/* + * Finds an active region in the address range from start_pfn to end_pfn and + * returns its range in ei_startpfn and ei_endpfn for the e820 entry. + */ +static int __init e820_find_active_region(const struct e820entry *ei, + unsigned long start_pfn, + unsigned long end_pfn, + unsigned long *ei_startpfn, + unsigned long *ei_endpfn) +{ + *ei_startpfn = round_up(ei->addr, PAGE_SIZE) >> PAGE_SHIFT; + *ei_endpfn = round_down(ei->addr + ei->size, PAGE_SIZE) >> PAGE_SHIFT; + + /* Skip map entries smaller than a page */ + if (*ei_startpfn >= *ei_endpfn) + return 0; + + /* Check if end_pfn_map should be updated */ + if (ei->type != E820_RAM && *ei_endpfn > end_pfn_map) + end_pfn_map = *ei_endpfn; + + /* Skip if map is outside the node */ + if (ei->type != E820_RAM || *ei_endpfn <= start_pfn || + *ei_startpfn >= end_pfn) + return 0; + + /* Check for overlaps */ + if (*ei_startpfn < start_pfn) + *ei_startpfn = start_pfn; + if (*ei_endpfn > end_pfn) + *ei_endpfn = end_pfn; + + /* Obey end_user_pfn to save on memmap */ + if (*ei_startpfn >= end_user_pfn) + return 0; + if (*ei_endpfn > end_user_pfn) + *ei_endpfn = end_user_pfn; + + return 1; +} + +/* Walk the e820 map and register active regions within a node */ +void __init +e820_register_active_regions(int nid, unsigned long start_pfn, + unsigned long end_pfn) +{ + unsigned long ei_startpfn; + unsigned long ei_endpfn; + int i; + + for (i = 0; i < e820.nr_map; i++) + if (e820_find_active_region(&e820.map[i], + start_pfn, end_pfn, + &ei_startpfn, &ei_endpfn)) + add_active_range(nid, ei_startpfn, ei_endpfn); +} + +/* + * Add a memory region to the kernel e820 map. + */ +void __init add_memory_region(unsigned long start, unsigned long size, int type) +{ + int x = e820.nr_map; + + if (x == E820MAX) { + printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); + return; + } + + e820.map[x].addr = start; + e820.map[x].size = size; + e820.map[x].type = type; + e820.nr_map++; +} + +/* + * Find the hole size (in bytes) in the memory range. + * @start: starting address of the memory range to scan + * @end: ending address of the memory range to scan + */ +unsigned long __init e820_hole_size(unsigned long start, unsigned long end) +{ + unsigned long start_pfn = start >> PAGE_SHIFT; + unsigned long end_pfn = end >> PAGE_SHIFT; + unsigned long ei_startpfn; + unsigned long ei_endpfn; + unsigned long ram = 0; + int i; + + for (i = 0; i < e820.nr_map; i++) { + if (e820_find_active_region(&e820.map[i], + start_pfn, end_pfn, + &ei_startpfn, &ei_endpfn)) + ram += ei_endpfn - ei_startpfn; + } + return end - start - (ram << PAGE_SHIFT); +} + +void __init e820_print_map(char *who) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + printk(KERN_INFO " %s: %016Lx - %016Lx ", who, + (unsigned long long) e820.map[i].addr, + (unsigned long long) (e820.map[i].addr + e820.map[i].size)); + switch (e820.map[i].type) { + case E820_RAM: printk("(usable)\n"); + break; + case E820_RESERVED: + printk("(reserved)\n"); + break; + case E820_ACPI: + printk("(ACPI data)\n"); + break; + case E820_NVS: + printk("(ACPI NVS)\n"); + break; + default: printk("type %u\n", e820.map[i].type); + break; + } + } +} + +/* + * Sanitize the BIOS e820 map. + * + * Some e820 responses include overlapping entries. The following + * replaces the original e820 map with a new one, removing overlaps. + * + */ +static int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map) +{ + struct change_member { + struct e820entry *pbios; /* pointer to original bios entry */ + unsigned long long addr; /* address for this change point */ + }; + static struct change_member change_point_list[2*E820MAX] __initdata; + static struct change_member *change_point[2*E820MAX] __initdata; + static struct e820entry *overlap_list[E820MAX] __initdata; + static struct e820entry new_bios[E820MAX] __initdata; + struct change_member *change_tmp; + unsigned long current_type, last_type; + unsigned long long last_addr; + int chgidx, still_changing; + int overlap_entries; + int new_bios_entry; + int old_nr, new_nr, chg_nr; + int i; + + /* + Visually we're performing the following (1,2,3,4 = memory types)... + + Sample memory map (w/overlaps): + ____22__________________ + ______________________4_ + ____1111________________ + _44_____________________ + 11111111________________ + ____________________33__ + ___________44___________ + __________33333_________ + ______________22________ + ___________________2222_ + _________111111111______ + _____________________11_ + _________________4______ + + Sanitized equivalent (no overlap): + 1_______________________ + _44_____________________ + ___1____________________ + ____22__________________ + ______11________________ + _________1______________ + __________3_____________ + ___________44___________ + _____________33_________ + _______________2________ + ________________1_______ + _________________4______ + ___________________2____ + ____________________33__ + ______________________4_ + */ + + /* if there's only one memory region, don't bother */ + if (*pnr_map < 2) + return -1; + + old_nr = *pnr_map; + + /* bail out if we find any unreasonable addresses in bios map */ + for (i=0; i<old_nr; i++) + if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) + return -1; + + /* create pointers for initial change-point information (for sorting) */ + for (i=0; i < 2*old_nr; i++) + change_point[i] = &change_point_list[i]; + + /* record all known change-points (starting and ending addresses), + omitting those that are for empty memory regions */ + chgidx = 0; + for (i=0; i < old_nr; i++) { + if (biosmap[i].size != 0) { + change_point[chgidx]->addr = biosmap[i].addr; + change_point[chgidx++]->pbios = &biosmap[i]; + change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size; + change_point[chgidx++]->pbios = &biosmap[i]; + } + } + chg_nr = chgidx; + + /* sort change-point list by memory addresses (low -> high) */ + still_changing = 1; + while (still_changing) { + still_changing = 0; + for (i=1; i < chg_nr; i++) { + /* if <current_addr> > <last_addr>, swap */ + /* or, if current=<start_addr> & last=<end_addr>, swap */ + if ((change_point[i]->addr < change_point[i-1]->addr) || + ((change_point[i]->addr == change_point[i-1]->addr) && + (change_point[i]->addr == change_point[i]->pbios->addr) && + (change_point[i-1]->addr != change_point[i-1]->pbios->addr)) + ) + { + change_tmp = change_point[i]; + change_point[i] = change_point[i-1]; + change_point[i-1] = change_tmp; + still_changing=1; + } + } + } + + /* create a new bios memory map, removing overlaps */ + overlap_entries=0; /* number of entries in the overlap table */ + new_bios_entry=0; /* index for creating new bios map entries */ + last_type = 0; /* start with undefined memory type */ + last_addr = 0; /* start with 0 as last starting address */ + /* loop through change-points, determining affect on the new bios map */ + for (chgidx=0; chgidx < chg_nr; chgidx++) + { + /* keep track of all overlapping bios entries */ + if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr) + { + /* add map entry to overlap list (> 1 entry implies an overlap) */ + overlap_list[overlap_entries++]=change_point[chgidx]->pbios; + } + else + { + /* remove entry from list (order independent, so swap with last) */ + for (i=0; i<overlap_entries; i++) + { + if (overlap_list[i] == change_point[chgidx]->pbios) + overlap_list[i] = overlap_list[overlap_entries-1]; + } + overlap_entries--; + } + /* if there are overlapping entries, decide which "type" to use */ + /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */ + current_type = 0; + for (i=0; i<overlap_entries; i++) + if (overlap_list[i]->type > current_type) + current_type = overlap_list[i]->type; + /* continue building up new bios map based on this information */ + if (current_type != last_type) { + if (last_type != 0) { + new_bios[new_bios_entry].size = + change_point[chgidx]->addr - last_addr; + /* move forward only if the new size was non-zero */ + if (new_bios[new_bios_entry].size != 0) + if (++new_bios_entry >= E820MAX) + break; /* no more space left for new bios entries */ + } + if (current_type != 0) { + new_bios[new_bios_entry].addr = change_point[chgidx]->addr; + new_bios[new_bios_entry].type = current_type; + last_addr=change_point[chgidx]->addr; + } + last_type = current_type; + } + } + new_nr = new_bios_entry; /* retain count for new bios entries */ + + /* copy new bios mapping into original location */ + memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry)); + *pnr_map = new_nr; + + return 0; +} + +/* + * Copy the BIOS e820 map into a safe place. + * + * Sanity-check it while we're at it.. + * + * If we're lucky and live on a modern system, the setup code + * will have given us a memory map that we can use to properly + * set up memory. If we aren't, we'll fake a memory map. + */ +static int __init copy_e820_map(struct e820entry * biosmap, int nr_map) +{ + /* Only one memory region (or negative)? Ignore it */ + if (nr_map < 2) + return -1; + + do { + unsigned long start = biosmap->addr; + unsigned long size = biosmap->size; + unsigned long end = start + size; + unsigned long type = biosmap->type; + + /* Overflow in 64 bits? Ignore the memory map. */ + if (start > end) + return -1; + + add_memory_region(start, size, type); + } while (biosmap++,--nr_map); + return 0; +} + +void early_panic(char *msg) +{ + early_printk(msg); + panic(msg); +} + +void __init setup_memory_region(void) +{ + /* + * Try to copy the BIOS-supplied E820-map. + * + * Otherwise fake a memory map; one section from 0k->640k, + * the next section from 1mb->appropriate_mem_k + */ + sanitize_e820_map(E820_MAP, &E820_MAP_NR); + if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) + early_panic("Cannot find a valid memory map"); + printk(KERN_INFO "BIOS-provided physical RAM map:\n"); + e820_print_map("BIOS-e820"); +} + +static int __init parse_memopt(char *p) +{ + if (!p) + return -EINVAL; + end_user_pfn = memparse(p, &p); + end_user_pfn >>= PAGE_SHIFT; + return 0; +} +early_param("mem", parse_memopt); + +static int userdef __initdata; + +static int __init parse_memmap_opt(char *p) +{ + char *oldp; + unsigned long long start_at, mem_size; + + if (!strcmp(p, "exactmap")) { +#ifdef CONFIG_CRASH_DUMP + /* If we are doing a crash dump, we + * still need to know the real mem + * size before original memory map is + * reset. + */ + e820_register_active_regions(0, 0, -1UL); + saved_max_pfn = e820_end_of_ram(); + remove_all_active_ranges(); +#endif + end_pfn_map = 0; + e820.nr_map = 0; + userdef = 1; + return 0; + } + + oldp = p; + mem_size = memparse(p, &p); + if (p == oldp) + return -EINVAL; + if (*p == '@') { + start_at = memparse(p+1, &p); + add_memory_region(start_at, mem_size, E820_RAM); + } else if (*p == '#') { + start_at = memparse(p+1, &p); + add_memory_region(start_at, mem_size, E820_ACPI); + } else if (*p == '$') { + start_at = memparse(p+1, &p); + add_memory_region(start_at, mem_size, E820_RESERVED); + } else { + end_user_pfn = (mem_size >> PAGE_SHIFT); + } + return *p == '\0' ? 0 : -EINVAL; +} +early_param("memmap", parse_memmap_opt); + +void __init finish_e820_parsing(void) +{ + if (userdef) { + printk(KERN_INFO "user-defined physical RAM map:\n"); + e820_print_map("user"); + } +} + +unsigned long pci_mem_start = 0xaeedbabe; +EXPORT_SYMBOL(pci_mem_start); + +/* + * Search for the biggest gap in the low 32 bits of the e820 + * memory space. We pass this space to PCI to assign MMIO resources + * for hotplug or unconfigured devices in. + * Hopefully the BIOS let enough space left. + */ +__init void e820_setup_gap(void) +{ + unsigned long gapstart, gapsize, round; + unsigned long last; + int i; + int found = 0; + + last = 0x100000000ull; + gapstart = 0x10000000; + gapsize = 0x400000; + i = e820.nr_map; + while (--i >= 0) { + unsigned long long start = e820.map[i].addr; + unsigned long long end = start + e820.map[i].size; + + /* + * Since "last" is at most 4GB, we know we'll + * fit in 32 bits if this condition is true + */ + if (last > end) { + unsigned long gap = last - end; + + if (gap > gapsize) { + gapsize = gap; + gapstart = end; + found = 1; + } + } + if (start < last) + last = start; + } + + if (!found) { + gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024; + printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit address range\n" + KERN_ERR "PCI: Unassigned devices with 32bit resource registers may break!\n"); + } + + /* + * See how much we want to round up: start off with + * rounding to the next 1MB area. + */ + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; + + printk(KERN_INFO "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", + pci_mem_start, gapstart, gapsize); +} diff --git a/arch/x86/kernel/early-quirks_64.c b/arch/x86/kernel/early-quirks_64.c new file mode 100644 index 000000000000..13aa4fd728f3 --- /dev/null +++ b/arch/x86/kernel/early-quirks_64.c @@ -0,0 +1,127 @@ +/* Various workarounds for chipset bugs. + This code runs very early and can't use the regular PCI subsystem + The entries are keyed to PCI bridges which usually identify chipsets + uniquely. + This is only for whole classes of chipsets with specific problems which + need early invasive action (e.g. before the timers are initialized). + Most PCI device specific workarounds can be done later and should be + in standard PCI quirks + Mainboard specific bugs should be handled by DMI entries. + CPU specific bugs in setup.c */ + +#include <linux/pci.h> +#include <linux/acpi.h> +#include <linux/pci_ids.h> +#include <asm/pci-direct.h> +#include <asm/proto.h> +#include <asm/iommu.h> +#include <asm/dma.h> + +static void __init via_bugs(void) +{ +#ifdef CONFIG_IOMMU + if ((end_pfn > MAX_DMA32_PFN || force_iommu) && + !iommu_aperture_allowed) { + printk(KERN_INFO + "Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed\n"); + iommu_aperture_disabled = 1; + } +#endif +} + +#ifdef CONFIG_ACPI + +static int __init nvidia_hpet_check(struct acpi_table_header *header) +{ + return 0; +} +#endif + +static void __init nvidia_bugs(void) +{ +#ifdef CONFIG_ACPI + /* + * All timer overrides on Nvidia are + * wrong unless HPET is enabled. + * Unfortunately that's not true on many Asus boards. + * We don't know yet how to detect this automatically, but + * at least allow a command line override. + */ + if (acpi_use_timer_override) + return; + + if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) { + acpi_skip_timer_override = 1; + printk(KERN_INFO "Nvidia board " + "detected. Ignoring ACPI " + "timer override.\n"); + printk(KERN_INFO "If you got timer trouble " + "try acpi_use_timer_override\n"); + } +#endif + /* RED-PEN skip them on mptables too? */ + +} + +static void __init ati_bugs(void) +{ + if (timer_over_8254 == 1) { + timer_over_8254 = 0; + printk(KERN_INFO + "ATI board detected. Disabling timer routing over 8254.\n"); + } +} + +struct chipset { + u16 vendor; + void (*f)(void); +}; + +static struct chipset early_qrk[] __initdata = { + { PCI_VENDOR_ID_NVIDIA, nvidia_bugs }, + { PCI_VENDOR_ID_VIA, via_bugs }, + { PCI_VENDOR_ID_ATI, ati_bugs }, + {} +}; + +void __init early_quirks(void) +{ + int num, slot, func; + + if (!early_pci_allowed()) + return; + + /* Poor man's PCI discovery */ + for (num = 0; num < 32; num++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + u32 class; + u32 vendor; + u8 type; + int i; + class = read_pci_config(num,slot,func, + PCI_CLASS_REVISION); + if (class == 0xffffffff) + break; + + if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) + continue; + + vendor = read_pci_config(num, slot, func, + PCI_VENDOR_ID); + vendor &= 0xffff; + + for (i = 0; early_qrk[i].f; i++) + if (early_qrk[i].vendor == vendor) { + early_qrk[i].f(); + return; + } + + type = read_pci_config_byte(num, slot, func, + PCI_HEADER_TYPE); + if (!(type & 0x80)) + break; + } + } + } +} diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c new file mode 100644 index 000000000000..fd9aff3f3890 --- /dev/null +++ b/arch/x86/kernel/early_printk.c @@ -0,0 +1,259 @@ +#include <linux/console.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/screen_info.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/fcntl.h> +#include <xen/hvc-console.h> + +/* Simple VGA output */ + +#ifdef __i386__ +#include <asm/setup.h> +#else +#include <asm/bootsetup.h> +#endif +#define VGABASE (__ISA_IO_base + 0xb8000) + +static int max_ypos = 25, max_xpos = 80; +static int current_ypos = 25, current_xpos = 0; + +static void early_vga_write(struct console *con, const char *str, unsigned n) +{ + char c; + int i, k, j; + + while ((c = *str++) != '\0' && n-- > 0) { + if (current_ypos >= max_ypos) { + /* scroll 1 line up */ + for (k = 1, j = 0; k < max_ypos; k++, j++) { + for (i = 0; i < max_xpos; i++) { + writew(readw(VGABASE+2*(max_xpos*k+i)), + VGABASE + 2*(max_xpos*j + i)); + } + } + for (i = 0; i < max_xpos; i++) + writew(0x720, VGABASE + 2*(max_xpos*j + i)); + current_ypos = max_ypos-1; + } + if (c == '\n') { + current_xpos = 0; + current_ypos++; + } else if (c != '\r') { + writew(((0x7 << 8) | (unsigned short) c), + VGABASE + 2*(max_xpos*current_ypos + + current_xpos++)); + if (current_xpos >= max_xpos) { + current_xpos = 0; + current_ypos++; + } + } + } +} + +static struct console early_vga_console = { + .name = "earlyvga", + .write = early_vga_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/* Serial functions loosely based on a similar package from Klaus P. Gerlicher */ + +static int early_serial_base = 0x3f8; /* ttyS0 */ + +#define XMTRDY 0x20 + +#define DLAB 0x80 + +#define TXR 0 /* Transmit register (WRITE) */ +#define RXR 0 /* Receive register (READ) */ +#define IER 1 /* Interrupt Enable */ +#define IIR 2 /* Interrupt ID */ +#define FCR 2 /* FIFO control */ +#define LCR 3 /* Line control */ +#define MCR 4 /* Modem control */ +#define LSR 5 /* Line Status */ +#define MSR 6 /* Modem Status */ +#define DLL 0 /* Divisor Latch Low */ +#define DLH 1 /* Divisor latch High */ + +static int early_serial_putc(unsigned char ch) +{ + unsigned timeout = 0xffff; + while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) + cpu_relax(); + outb(ch, early_serial_base + TXR); + return timeout ? 0 : -1; +} + +static void early_serial_write(struct console *con, const char *s, unsigned n) +{ + while (*s && n-- > 0) { + if (*s == '\n') + early_serial_putc('\r'); + early_serial_putc(*s); + s++; + } +} + +#define DEFAULT_BAUD 9600 + +static __init void early_serial_init(char *s) +{ + unsigned char c; + unsigned divisor; + unsigned baud = DEFAULT_BAUD; + char *e; + + if (*s == ',') + ++s; + + if (*s) { + unsigned port; + if (!strncmp(s,"0x",2)) { + early_serial_base = simple_strtoul(s, &e, 16); + } else { + static int bases[] = { 0x3f8, 0x2f8 }; + + if (!strncmp(s,"ttyS",4)) + s += 4; + port = simple_strtoul(s, &e, 10); + if (port > 1 || s == e) + port = 0; + early_serial_base = bases[port]; + } + s += strcspn(s, ","); + if (*s == ',') + s++; + } + + outb(0x3, early_serial_base + LCR); /* 8n1 */ + outb(0, early_serial_base + IER); /* no interrupt */ + outb(0, early_serial_base + FCR); /* no fifo */ + outb(0x3, early_serial_base + MCR); /* DTR + RTS */ + + if (*s) { + baud = simple_strtoul(s, &e, 0); + if (baud == 0 || s == e) + baud = DEFAULT_BAUD; + } + + divisor = 115200 / baud; + c = inb(early_serial_base + LCR); + outb(c | DLAB, early_serial_base + LCR); + outb(divisor & 0xff, early_serial_base + DLL); + outb((divisor >> 8) & 0xff, early_serial_base + DLH); + outb(c & ~DLAB, early_serial_base + LCR); +} + +static struct console early_serial_console = { + .name = "earlyser", + .write = early_serial_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/* Console interface to a host file on AMD's SimNow! */ + +static int simnow_fd; + +enum { + MAGIC1 = 0xBACCD00A, + MAGIC2 = 0xCA110000, + XOPEN = 5, + XWRITE = 4, +}; + +static noinline long simnow(long cmd, long a, long b, long c) +{ + long ret; + asm volatile("cpuid" : + "=a" (ret) : + "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2)); + return ret; +} + +static void __init simnow_init(char *str) +{ + char *fn = "klog"; + if (*str == '=') + fn = ++str; + /* error ignored */ + simnow_fd = simnow(XOPEN, (unsigned long)fn, O_WRONLY|O_APPEND|O_CREAT, 0644); +} + +static void simnow_write(struct console *con, const char *s, unsigned n) +{ + simnow(XWRITE, simnow_fd, (unsigned long)s, n); +} + +static struct console simnow_console = { + .name = "simnow", + .write = simnow_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/* Direct interface for emergencies */ +struct console *early_console = &early_vga_console; +static int early_console_initialized = 0; + +void early_printk(const char *fmt, ...) +{ + char buf[512]; + int n; + va_list ap; + + va_start(ap,fmt); + n = vscnprintf(buf,512,fmt,ap); + early_console->write(early_console,buf,n); + va_end(ap); +} + +static int __initdata keep_early; + +static int __init setup_early_printk(char *buf) +{ + if (!buf) + return 0; + + if (early_console_initialized) + return 0; + early_console_initialized = 1; + + if (strstr(buf, "keep")) + keep_early = 1; + + if (!strncmp(buf, "serial", 6)) { + early_serial_init(buf + 6); + early_console = &early_serial_console; + } else if (!strncmp(buf, "ttyS", 4)) { + early_serial_init(buf); + early_console = &early_serial_console; + } else if (!strncmp(buf, "vga", 3) + && SCREEN_INFO.orig_video_isVGA == 1) { + max_xpos = SCREEN_INFO.orig_video_cols; + max_ypos = SCREEN_INFO.orig_video_lines; + current_ypos = SCREEN_INFO.orig_y; + early_console = &early_vga_console; + } else if (!strncmp(buf, "simnow", 6)) { + simnow_init(buf + 6); + early_console = &simnow_console; + keep_early = 1; +#ifdef CONFIG_HVC_XEN + } else if (!strncmp(buf, "xen", 3)) { + early_console = &xenboot_console; +#endif + } + + if (keep_early) + early_console->flags &= ~CON_BOOT; + else + early_console->flags |= CON_BOOT; + register_console(early_console); + return 0; +} +early_param("earlyprintk", setup_early_printk); diff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c new file mode 100644 index 000000000000..2452c6fbe992 --- /dev/null +++ b/arch/x86/kernel/efi_32.c @@ -0,0 +1,712 @@ +/* + * Extensible Firmware Interface + * + * Based on Extensible Firmware Interface Specification version 1.0 + * + * Copyright (C) 1999 VA Linux Systems + * Copyright (C) 1999 Walt Drummond <drummond@valinux.com> + * Copyright (C) 1999-2002 Hewlett-Packard Co. + * David Mosberger-Tang <davidm@hpl.hp.com> + * Stephane Eranian <eranian@hpl.hp.com> + * + * All EFI Runtime Services are not implemented yet as EFI only + * supports physical mode addressing on SoftSDV. This is to be fixed + * in a future version. --drummond 1999-07-20 + * + * Implemented EFI runtime services and virtual mode calls. --davidm + * + * Goutham Rao: <goutham.rao@intel.com> + * Skip non-WB memory and ignore empty memory ranges. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/types.h> +#include <linux/time.h> +#include <linux/spinlock.h> +#include <linux/bootmem.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/efi.h> +#include <linux/kexec.h> + +#include <asm/setup.h> +#include <asm/io.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/desc.h> +#include <asm/tlbflush.h> + +#define EFI_DEBUG 0 +#define PFX "EFI: " + +extern efi_status_t asmlinkage efi_call_phys(void *, ...); + +struct efi efi; +EXPORT_SYMBOL(efi); +static struct efi efi_phys; +struct efi_memory_map memmap; + +/* + * We require an early boot_ioremap mapping mechanism initially + */ +extern void * boot_ioremap(unsigned long, unsigned long); + +/* + * To make EFI call EFI runtime service in physical addressing mode we need + * prelog/epilog before/after the invocation to disable interrupt, to + * claim EFI runtime service handler exclusively and to duplicate a memory in + * low memory space say 0 - 3G. + */ + +static unsigned long efi_rt_eflags; +static DEFINE_SPINLOCK(efi_rt_lock); +static pgd_t efi_bak_pg_dir_pointer[2]; + +static void efi_call_phys_prelog(void) __acquires(efi_rt_lock) +{ + unsigned long cr4; + unsigned long temp; + struct Xgt_desc_struct gdt_descr; + + spin_lock(&efi_rt_lock); + local_irq_save(efi_rt_eflags); + + /* + * If I don't have PSE, I should just duplicate two entries in page + * directory. If I have PSE, I just need to duplicate one entry in + * page directory. + */ + cr4 = read_cr4(); + + if (cr4 & X86_CR4_PSE) { + efi_bak_pg_dir_pointer[0].pgd = + swapper_pg_dir[pgd_index(0)].pgd; + swapper_pg_dir[0].pgd = + swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; + } else { + efi_bak_pg_dir_pointer[0].pgd = + swapper_pg_dir[pgd_index(0)].pgd; + efi_bak_pg_dir_pointer[1].pgd = + swapper_pg_dir[pgd_index(0x400000)].pgd; + swapper_pg_dir[pgd_index(0)].pgd = + swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; + temp = PAGE_OFFSET + 0x400000; + swapper_pg_dir[pgd_index(0x400000)].pgd = + swapper_pg_dir[pgd_index(temp)].pgd; + } + + /* + * After the lock is released, the original page table is restored. + */ + local_flush_tlb(); + + gdt_descr.address = __pa(get_cpu_gdt_table(0)); + gdt_descr.size = GDT_SIZE - 1; + load_gdt(&gdt_descr); +} + +static void efi_call_phys_epilog(void) __releases(efi_rt_lock) +{ + unsigned long cr4; + struct Xgt_desc_struct gdt_descr; + + gdt_descr.address = (unsigned long)get_cpu_gdt_table(0); + gdt_descr.size = GDT_SIZE - 1; + load_gdt(&gdt_descr); + + cr4 = read_cr4(); + + if (cr4 & X86_CR4_PSE) { + swapper_pg_dir[pgd_index(0)].pgd = + efi_bak_pg_dir_pointer[0].pgd; + } else { + swapper_pg_dir[pgd_index(0)].pgd = + efi_bak_pg_dir_pointer[0].pgd; + swapper_pg_dir[pgd_index(0x400000)].pgd = + efi_bak_pg_dir_pointer[1].pgd; + } + + /* + * After the lock is released, the original page table is restored. + */ + local_flush_tlb(); + + local_irq_restore(efi_rt_eflags); + spin_unlock(&efi_rt_lock); +} + +static efi_status_t +phys_efi_set_virtual_address_map(unsigned long memory_map_size, + unsigned long descriptor_size, + u32 descriptor_version, + efi_memory_desc_t *virtual_map) +{ + efi_status_t status; + + efi_call_phys_prelog(); + status = efi_call_phys(efi_phys.set_virtual_address_map, + memory_map_size, descriptor_size, + descriptor_version, virtual_map); + efi_call_phys_epilog(); + return status; +} + +static efi_status_t +phys_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc) +{ + efi_status_t status; + + efi_call_phys_prelog(); + status = efi_call_phys(efi_phys.get_time, tm, tc); + efi_call_phys_epilog(); + return status; +} + +inline int efi_set_rtc_mmss(unsigned long nowtime) +{ + int real_seconds, real_minutes; + efi_status_t status; + efi_time_t eft; + efi_time_cap_t cap; + + spin_lock(&efi_rt_lock); + status = efi.get_time(&eft, &cap); + spin_unlock(&efi_rt_lock); + if (status != EFI_SUCCESS) + panic("Ooops, efitime: can't read time!\n"); + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + + if (((abs(real_minutes - eft.minute) + 15)/30) & 1) + real_minutes += 30; + real_minutes %= 60; + + eft.minute = real_minutes; + eft.second = real_seconds; + + if (status != EFI_SUCCESS) { + printk("Ooops: efitime: can't read time!\n"); + return -1; + } + return 0; +} +/* + * This is used during kernel init before runtime + * services have been remapped and also during suspend, therefore, + * we'll need to call both in physical and virtual modes. + */ +inline unsigned long efi_get_time(void) +{ + efi_status_t status; + efi_time_t eft; + efi_time_cap_t cap; + + if (efi.get_time) { + /* if we are in virtual mode use remapped function */ + status = efi.get_time(&eft, &cap); + } else { + /* we are in physical mode */ + status = phys_efi_get_time(&eft, &cap); + } + + if (status != EFI_SUCCESS) + printk("Oops: efitime: can't read time status: 0x%lx\n",status); + + return mktime(eft.year, eft.month, eft.day, eft.hour, + eft.minute, eft.second); +} + +int is_available_memory(efi_memory_desc_t * md) +{ + if (!(md->attribute & EFI_MEMORY_WB)) + return 0; + + switch (md->type) { + case EFI_LOADER_CODE: + case EFI_LOADER_DATA: + case EFI_BOOT_SERVICES_CODE: + case EFI_BOOT_SERVICES_DATA: + case EFI_CONVENTIONAL_MEMORY: + return 1; + } + return 0; +} + +/* + * We need to map the EFI memory map again after paging_init(). + */ +void __init efi_map_memmap(void) +{ + memmap.map = NULL; + + memmap.map = bt_ioremap((unsigned long) memmap.phys_map, + (memmap.nr_map * memmap.desc_size)); + if (memmap.map == NULL) + printk(KERN_ERR PFX "Could not remap the EFI memmap!\n"); + + memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size); +} + +#if EFI_DEBUG +static void __init print_efi_memmap(void) +{ + efi_memory_desc_t *md; + void *p; + int i; + + for (p = memmap.map, i = 0; p < memmap.map_end; p += memmap.desc_size, i++) { + md = p; + printk(KERN_INFO "mem%02u: type=%u, attr=0x%llx, " + "range=[0x%016llx-0x%016llx) (%lluMB)\n", + i, md->type, md->attribute, md->phys_addr, + md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT), + (md->num_pages >> (20 - EFI_PAGE_SHIFT))); + } +} +#endif /* EFI_DEBUG */ + +/* + * Walks the EFI memory map and calls CALLBACK once for each EFI + * memory descriptor that has memory that is available for kernel use. + */ +void efi_memmap_walk(efi_freemem_callback_t callback, void *arg) +{ + int prev_valid = 0; + struct range { + unsigned long start; + unsigned long end; + } uninitialized_var(prev), curr; + efi_memory_desc_t *md; + unsigned long start, end; + void *p; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; + + if ((md->num_pages == 0) || (!is_available_memory(md))) + continue; + + curr.start = md->phys_addr; + curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT); + + if (!prev_valid) { + prev = curr; + prev_valid = 1; + } else { + if (curr.start < prev.start) + printk(KERN_INFO PFX "Unordered memory map\n"); + if (prev.end == curr.start) + prev.end = curr.end; + else { + start = + (unsigned long) (PAGE_ALIGN(prev.start)); + end = (unsigned long) (prev.end & PAGE_MASK); + if ((end > start) + && (*callback) (start, end, arg) < 0) + return; + prev = curr; + } + } + } + if (prev_valid) { + start = (unsigned long) PAGE_ALIGN(prev.start); + end = (unsigned long) (prev.end & PAGE_MASK); + if (end > start) + (*callback) (start, end, arg); + } +} + +void __init efi_init(void) +{ + efi_config_table_t *config_tables; + efi_runtime_services_t *runtime; + efi_char16_t *c16; + char vendor[100] = "unknown"; + unsigned long num_config_tables; + int i = 0; + + memset(&efi, 0, sizeof(efi) ); + memset(&efi_phys, 0, sizeof(efi_phys)); + + efi_phys.systab = EFI_SYSTAB; + memmap.phys_map = EFI_MEMMAP; + memmap.nr_map = EFI_MEMMAP_SIZE/EFI_MEMDESC_SIZE; + memmap.desc_version = EFI_MEMDESC_VERSION; + memmap.desc_size = EFI_MEMDESC_SIZE; + + efi.systab = (efi_system_table_t *) + boot_ioremap((unsigned long) efi_phys.systab, + sizeof(efi_system_table_t)); + /* + * Verify the EFI Table + */ + if (efi.systab == NULL) + printk(KERN_ERR PFX "Woah! Couldn't map the EFI system table.\n"); + if (efi.systab->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) + printk(KERN_ERR PFX "Woah! EFI system table signature incorrect\n"); + if ((efi.systab->hdr.revision >> 16) == 0) + printk(KERN_ERR PFX "Warning: EFI system table version " + "%d.%02d, expected 1.00 or greater\n", + efi.systab->hdr.revision >> 16, + efi.systab->hdr.revision & 0xffff); + + /* + * Grab some details from the system table + */ + num_config_tables = efi.systab->nr_tables; + config_tables = (efi_config_table_t *)efi.systab->tables; + runtime = efi.systab->runtime; + + /* + * Show what we know for posterity + */ + c16 = (efi_char16_t *) boot_ioremap(efi.systab->fw_vendor, 2); + if (c16) { + for (i = 0; i < (sizeof(vendor) - 1) && *c16; ++i) + vendor[i] = *c16++; + vendor[i] = '\0'; + } else + printk(KERN_ERR PFX "Could not map the firmware vendor!\n"); + + printk(KERN_INFO PFX "EFI v%u.%.02u by %s \n", + efi.systab->hdr.revision >> 16, + efi.systab->hdr.revision & 0xffff, vendor); + + /* + * Let's see what config tables the firmware passed to us. + */ + config_tables = (efi_config_table_t *) + boot_ioremap((unsigned long) config_tables, + num_config_tables * sizeof(efi_config_table_t)); + + if (config_tables == NULL) + printk(KERN_ERR PFX "Could not map EFI Configuration Table!\n"); + + efi.mps = EFI_INVALID_TABLE_ADDR; + efi.acpi = EFI_INVALID_TABLE_ADDR; + efi.acpi20 = EFI_INVALID_TABLE_ADDR; + efi.smbios = EFI_INVALID_TABLE_ADDR; + efi.sal_systab = EFI_INVALID_TABLE_ADDR; + efi.boot_info = EFI_INVALID_TABLE_ADDR; + efi.hcdp = EFI_INVALID_TABLE_ADDR; + efi.uga = EFI_INVALID_TABLE_ADDR; + + for (i = 0; i < num_config_tables; i++) { + if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) { + efi.mps = config_tables[i].table; + printk(KERN_INFO " MPS=0x%lx ", config_tables[i].table); + } else + if (efi_guidcmp(config_tables[i].guid, ACPI_20_TABLE_GUID) == 0) { + efi.acpi20 = config_tables[i].table; + printk(KERN_INFO " ACPI 2.0=0x%lx ", config_tables[i].table); + } else + if (efi_guidcmp(config_tables[i].guid, ACPI_TABLE_GUID) == 0) { + efi.acpi = config_tables[i].table; + printk(KERN_INFO " ACPI=0x%lx ", config_tables[i].table); + } else + if (efi_guidcmp(config_tables[i].guid, SMBIOS_TABLE_GUID) == 0) { + efi.smbios = config_tables[i].table; + printk(KERN_INFO " SMBIOS=0x%lx ", config_tables[i].table); + } else + if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) { + efi.hcdp = config_tables[i].table; + printk(KERN_INFO " HCDP=0x%lx ", config_tables[i].table); + } else + if (efi_guidcmp(config_tables[i].guid, UGA_IO_PROTOCOL_GUID) == 0) { + efi.uga = config_tables[i].table; + printk(KERN_INFO " UGA=0x%lx ", config_tables[i].table); + } + } + printk("\n"); + + /* + * Check out the runtime services table. We need to map + * the runtime services table so that we can grab the physical + * address of several of the EFI runtime functions, needed to + * set the firmware into virtual mode. + */ + + runtime = (efi_runtime_services_t *) boot_ioremap((unsigned long) + runtime, + sizeof(efi_runtime_services_t)); + if (runtime != NULL) { + /* + * We will only need *early* access to the following + * two EFI runtime services before set_virtual_address_map + * is invoked. + */ + efi_phys.get_time = (efi_get_time_t *) runtime->get_time; + efi_phys.set_virtual_address_map = + (efi_set_virtual_address_map_t *) + runtime->set_virtual_address_map; + } else + printk(KERN_ERR PFX "Could not map the runtime service table!\n"); + + /* Map the EFI memory map for use until paging_init() */ + memmap.map = boot_ioremap((unsigned long) EFI_MEMMAP, EFI_MEMMAP_SIZE); + if (memmap.map == NULL) + printk(KERN_ERR PFX "Could not map the EFI memory map!\n"); + + memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size); + +#if EFI_DEBUG + print_efi_memmap(); +#endif +} + +static inline void __init check_range_for_systab(efi_memory_desc_t *md) +{ + if (((unsigned long)md->phys_addr <= (unsigned long)efi_phys.systab) && + ((unsigned long)efi_phys.systab < md->phys_addr + + ((unsigned long)md->num_pages << EFI_PAGE_SHIFT))) { + unsigned long addr; + + addr = md->virt_addr - md->phys_addr + + (unsigned long)efi_phys.systab; + efi.systab = (efi_system_table_t *)addr; + } +} + +/* + * Wrap all the virtual calls in a way that forces the parameters on the stack. + */ + +#define efi_call_virt(f, args...) \ + ((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args) + +static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc) +{ + return efi_call_virt(get_time, tm, tc); +} + +static efi_status_t virt_efi_set_time (efi_time_t *tm) +{ + return efi_call_virt(set_time, tm); +} + +static efi_status_t virt_efi_get_wakeup_time (efi_bool_t *enabled, + efi_bool_t *pending, + efi_time_t *tm) +{ + return efi_call_virt(get_wakeup_time, enabled, pending, tm); +} + +static efi_status_t virt_efi_set_wakeup_time (efi_bool_t enabled, + efi_time_t *tm) +{ + return efi_call_virt(set_wakeup_time, enabled, tm); +} + +static efi_status_t virt_efi_get_variable (efi_char16_t *name, + efi_guid_t *vendor, u32 *attr, + unsigned long *data_size, void *data) +{ + return efi_call_virt(get_variable, name, vendor, attr, data_size, data); +} + +static efi_status_t virt_efi_get_next_variable (unsigned long *name_size, + efi_char16_t *name, + efi_guid_t *vendor) +{ + return efi_call_virt(get_next_variable, name_size, name, vendor); +} + +static efi_status_t virt_efi_set_variable (efi_char16_t *name, + efi_guid_t *vendor, + unsigned long attr, + unsigned long data_size, void *data) +{ + return efi_call_virt(set_variable, name, vendor, attr, data_size, data); +} + +static efi_status_t virt_efi_get_next_high_mono_count (u32 *count) +{ + return efi_call_virt(get_next_high_mono_count, count); +} + +static void virt_efi_reset_system (int reset_type, efi_status_t status, + unsigned long data_size, + efi_char16_t *data) +{ + efi_call_virt(reset_system, reset_type, status, data_size, data); +} + +/* + * This function will switch the EFI runtime services to virtual mode. + * Essentially, look through the EFI memmap and map every region that + * has the runtime attribute bit set in its memory descriptor and update + * that memory descriptor with the virtual address obtained from ioremap(). + * This enables the runtime services to be called without having to + * thunk back into physical mode for every invocation. + */ + +void __init efi_enter_virtual_mode(void) +{ + efi_memory_desc_t *md; + efi_status_t status; + void *p; + + efi.systab = NULL; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; + + if (!(md->attribute & EFI_MEMORY_RUNTIME)) + continue; + + md->virt_addr = (unsigned long)ioremap(md->phys_addr, + md->num_pages << EFI_PAGE_SHIFT); + if (!(unsigned long)md->virt_addr) { + printk(KERN_ERR PFX "ioremap of 0x%lX failed\n", + (unsigned long)md->phys_addr); + } + /* update the virtual address of the EFI system table */ + check_range_for_systab(md); + } + + BUG_ON(!efi.systab); + + status = phys_efi_set_virtual_address_map( + memmap.desc_size * memmap.nr_map, + memmap.desc_size, + memmap.desc_version, + memmap.phys_map); + + if (status != EFI_SUCCESS) { + printk (KERN_ALERT "You are screwed! " + "Unable to switch EFI into virtual mode " + "(status=%lx)\n", status); + panic("EFI call to SetVirtualAddressMap() failed!"); + } + + /* + * Now that EFI is in virtual mode, update the function + * pointers in the runtime service table to the new virtual addresses. + */ + + efi.get_time = virt_efi_get_time; + efi.set_time = virt_efi_set_time; + efi.get_wakeup_time = virt_efi_get_wakeup_time; + efi.set_wakeup_time = virt_efi_set_wakeup_time; + efi.get_variable = virt_efi_get_variable; + efi.get_next_variable = virt_efi_get_next_variable; + efi.set_variable = virt_efi_set_variable; + efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count; + efi.reset_system = virt_efi_reset_system; +} + +void __init +efi_initialize_iomem_resources(struct resource *code_resource, + struct resource *data_resource) +{ + struct resource *res; + efi_memory_desc_t *md; + void *p; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; + + if ((md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) > + 0x100000000ULL) + continue; + res = kzalloc(sizeof(struct resource), GFP_ATOMIC); + switch (md->type) { + case EFI_RESERVED_TYPE: + res->name = "Reserved Memory"; + break; + case EFI_LOADER_CODE: + res->name = "Loader Code"; + break; + case EFI_LOADER_DATA: + res->name = "Loader Data"; + break; + case EFI_BOOT_SERVICES_DATA: + res->name = "BootServices Data"; + break; + case EFI_BOOT_SERVICES_CODE: + res->name = "BootServices Code"; + break; + case EFI_RUNTIME_SERVICES_CODE: + res->name = "Runtime Service Code"; + break; + case EFI_RUNTIME_SERVICES_DATA: + res->name = "Runtime Service Data"; + break; + case EFI_CONVENTIONAL_MEMORY: + res->name = "Conventional Memory"; + break; + case EFI_UNUSABLE_MEMORY: + res->name = "Unusable Memory"; + break; + case EFI_ACPI_RECLAIM_MEMORY: + res->name = "ACPI Reclaim"; + break; + case EFI_ACPI_MEMORY_NVS: + res->name = "ACPI NVS"; + break; + case EFI_MEMORY_MAPPED_IO: + res->name = "Memory Mapped IO"; + break; + case EFI_MEMORY_MAPPED_IO_PORT_SPACE: + res->name = "Memory Mapped IO Port Space"; + break; + default: + res->name = "Reserved"; + break; + } + res->start = md->phys_addr; + res->end = res->start + ((md->num_pages << EFI_PAGE_SHIFT) - 1); + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (request_resource(&iomem_resource, res) < 0) + printk(KERN_ERR PFX "Failed to allocate res %s : " + "0x%llx-0x%llx\n", res->name, + (unsigned long long)res->start, + (unsigned long long)res->end); + /* + * We don't know which region contains kernel data so we try + * it repeatedly and let the resource manager test it. + */ + if (md->type == EFI_CONVENTIONAL_MEMORY) { + request_resource(res, code_resource); + request_resource(res, data_resource); +#ifdef CONFIG_KEXEC + request_resource(res, &crashk_res); +#endif + } + } +} + +/* + * Convenience functions to obtain memory types and attributes + */ + +u32 efi_mem_type(unsigned long phys_addr) +{ + efi_memory_desc_t *md; + void *p; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; + if ((md->phys_addr <= phys_addr) && (phys_addr < + (md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) )) + return md->type; + } + return 0; +} + +u64 efi_mem_attributes(unsigned long phys_addr) +{ + efi_memory_desc_t *md; + void *p; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + md = p; + if ((md->phys_addr <= phys_addr) && (phys_addr < + (md->phys_addr + (md-> num_pages << EFI_PAGE_SHIFT)) )) + return md->attribute; + } + return 0; +} diff --git a/arch/x86/kernel/efi_stub_32.S b/arch/x86/kernel/efi_stub_32.S new file mode 100644 index 000000000000..ef00bb77d7e4 --- /dev/null +++ b/arch/x86/kernel/efi_stub_32.S @@ -0,0 +1,122 @@ +/* + * EFI call stub for IA32. + * + * This stub allows us to make EFI calls in physical mode with interrupts + * turned off. + */ + +#include <linux/linkage.h> +#include <asm/page.h> + +/* + * efi_call_phys(void *, ...) is a function with variable parameters. + * All the callers of this function assure that all the parameters are 4-bytes. + */ + +/* + * In gcc calling convention, EBX, ESP, EBP, ESI and EDI are all callee save. + * So we'd better save all of them at the beginning of this function and restore + * at the end no matter how many we use, because we can not assure EFI runtime + * service functions will comply with gcc calling convention, too. + */ + +.text +ENTRY(efi_call_phys) + /* + * 0. The function can only be called in Linux kernel. So CS has been + * set to 0x0010, DS and SS have been set to 0x0018. In EFI, I found + * the values of these registers are the same. And, the corresponding + * GDT entries are identical. So I will do nothing about segment reg + * and GDT, but change GDT base register in prelog and epilog. + */ + + /* + * 1. Now I am running with EIP = <physical address> + PAGE_OFFSET. + * But to make it smoothly switch from virtual mode to flat mode. + * The mapping of lower virtual memory has been created in prelog and + * epilog. + */ + movl $1f, %edx + subl $__PAGE_OFFSET, %edx + jmp *%edx +1: + + /* + * 2. Now on the top of stack is the return + * address in the caller of efi_call_phys(), then parameter 1, + * parameter 2, ..., param n. To make things easy, we save the return + * address of efi_call_phys in a global variable. + */ + popl %edx + movl %edx, saved_return_addr + /* get the function pointer into ECX*/ + popl %ecx + movl %ecx, efi_rt_function_ptr + movl $2f, %edx + subl $__PAGE_OFFSET, %edx + pushl %edx + + /* + * 3. Clear PG bit in %CR0. + */ + movl %cr0, %edx + andl $0x7fffffff, %edx + movl %edx, %cr0 + jmp 1f +1: + + /* + * 4. Adjust stack pointer. + */ + subl $__PAGE_OFFSET, %esp + + /* + * 5. Call the physical function. + */ + jmp *%ecx + +2: + /* + * 6. After EFI runtime service returns, control will return to + * following instruction. We'd better readjust stack pointer first. + */ + addl $__PAGE_OFFSET, %esp + + /* + * 7. Restore PG bit + */ + movl %cr0, %edx + orl $0x80000000, %edx + movl %edx, %cr0 + jmp 1f +1: + /* + * 8. Now restore the virtual mode from flat mode by + * adding EIP with PAGE_OFFSET. + */ + movl $1f, %edx + jmp *%edx +1: + + /* + * 9. Balance the stack. And because EAX contain the return value, + * we'd better not clobber it. + */ + leal efi_rt_function_ptr, %edx + movl (%edx), %ecx + pushl %ecx + + /* + * 10. Push the saved return address onto the stack and return. + */ + leal saved_return_addr, %edx + movl (%edx), %ecx + pushl %ecx + ret +.previous + +.data +saved_return_addr: + .long 0 +efi_rt_function_ptr: + .long 0 diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S new file mode 100644 index 000000000000..290b7bc82da3 --- /dev/null +++ b/arch/x86/kernel/entry_32.S @@ -0,0 +1,1112 @@ +/* + * linux/arch/i386/entry.S + * + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +/* + * entry.S contains the system-call and fault low-level handling routines. + * This also contains the timer-interrupt handler, as well as all interrupts + * and faults that can result in a task-switch. + * + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + * + * I changed all the .align's to 4 (16 byte alignment), as that's faster + * on a 486. + * + * Stack layout in 'syscall_exit': + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be + * updated in fork.c:copy_process, signal.c:do_signal, + * ptrace.c and ptrace.h + * + * 0(%esp) - %ebx + * 4(%esp) - %ecx + * 8(%esp) - %edx + * C(%esp) - %esi + * 10(%esp) - %edi + * 14(%esp) - %ebp + * 18(%esp) - %eax + * 1C(%esp) - %ds + * 20(%esp) - %es + * 24(%esp) - %fs + * 28(%esp) - orig_eax + * 2C(%esp) - %eip + * 30(%esp) - %cs + * 34(%esp) - %eflags + * 38(%esp) - %oldesp + * 3C(%esp) - %oldss + * + * "current" is in register %ebx during any slow entries. + */ + +#include <linux/linkage.h> +#include <asm/thread_info.h> +#include <asm/irqflags.h> +#include <asm/errno.h> +#include <asm/segment.h> +#include <asm/smp.h> +#include <asm/page.h> +#include <asm/desc.h> +#include <asm/percpu.h> +#include <asm/dwarf2.h> +#include "irq_vectors.h" + +/* + * We use macros for low-level operations which need to be overridden + * for paravirtualization. The following will never clobber any registers: + * INTERRUPT_RETURN (aka. "iret") + * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax") + * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit"). + * + * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must + * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY). + * Allowing a register to be clobbered can shrink the paravirt replacement + * enough to patch inline, increasing performance. + */ + +#define nr_syscalls ((syscall_table_size)/4) + +CF_MASK = 0x00000001 +TF_MASK = 0x00000100 +IF_MASK = 0x00000200 +DF_MASK = 0x00000400 +NT_MASK = 0x00004000 +VM_MASK = 0x00020000 + +#ifdef CONFIG_PREEMPT +#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF +#else +#define preempt_stop(clobbers) +#define resume_kernel restore_nocheck +#endif + +.macro TRACE_IRQS_IRET +#ifdef CONFIG_TRACE_IRQFLAGS + testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off? + jz 1f + TRACE_IRQS_ON +1: +#endif +.endm + +#ifdef CONFIG_VM86 +#define resume_userspace_sig check_userspace +#else +#define resume_userspace_sig resume_userspace +#endif + +#define SAVE_ALL \ + cld; \ + pushl %fs; \ + CFI_ADJUST_CFA_OFFSET 4;\ + /*CFI_REL_OFFSET fs, 0;*/\ + pushl %es; \ + CFI_ADJUST_CFA_OFFSET 4;\ + /*CFI_REL_OFFSET es, 0;*/\ + pushl %ds; \ + CFI_ADJUST_CFA_OFFSET 4;\ + /*CFI_REL_OFFSET ds, 0;*/\ + pushl %eax; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET eax, 0;\ + pushl %ebp; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET ebp, 0;\ + pushl %edi; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET edi, 0;\ + pushl %esi; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET esi, 0;\ + pushl %edx; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET edx, 0;\ + pushl %ecx; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET ecx, 0;\ + pushl %ebx; \ + CFI_ADJUST_CFA_OFFSET 4;\ + CFI_REL_OFFSET ebx, 0;\ + movl $(__USER_DS), %edx; \ + movl %edx, %ds; \ + movl %edx, %es; \ + movl $(__KERNEL_PERCPU), %edx; \ + movl %edx, %fs + +#define RESTORE_INT_REGS \ + popl %ebx; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE ebx;\ + popl %ecx; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE ecx;\ + popl %edx; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE edx;\ + popl %esi; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE esi;\ + popl %edi; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE edi;\ + popl %ebp; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE ebp;\ + popl %eax; \ + CFI_ADJUST_CFA_OFFSET -4;\ + CFI_RESTORE eax + +#define RESTORE_REGS \ + RESTORE_INT_REGS; \ +1: popl %ds; \ + CFI_ADJUST_CFA_OFFSET -4;\ + /*CFI_RESTORE ds;*/\ +2: popl %es; \ + CFI_ADJUST_CFA_OFFSET -4;\ + /*CFI_RESTORE es;*/\ +3: popl %fs; \ + CFI_ADJUST_CFA_OFFSET -4;\ + /*CFI_RESTORE fs;*/\ +.pushsection .fixup,"ax"; \ +4: movl $0,(%esp); \ + jmp 1b; \ +5: movl $0,(%esp); \ + jmp 2b; \ +6: movl $0,(%esp); \ + jmp 3b; \ +.section __ex_table,"a";\ + .align 4; \ + .long 1b,4b; \ + .long 2b,5b; \ + .long 3b,6b; \ +.popsection + +#define RING0_INT_FRAME \ + CFI_STARTPROC simple;\ + CFI_SIGNAL_FRAME;\ + CFI_DEF_CFA esp, 3*4;\ + /*CFI_OFFSET cs, -2*4;*/\ + CFI_OFFSET eip, -3*4 + +#define RING0_EC_FRAME \ + CFI_STARTPROC simple;\ + CFI_SIGNAL_FRAME;\ + CFI_DEF_CFA esp, 4*4;\ + /*CFI_OFFSET cs, -2*4;*/\ + CFI_OFFSET eip, -3*4 + +#define RING0_PTREGS_FRAME \ + CFI_STARTPROC simple;\ + CFI_SIGNAL_FRAME;\ + CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\ + /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\ + CFI_OFFSET eip, PT_EIP-PT_OLDESP;\ + /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\ + /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\ + CFI_OFFSET eax, PT_EAX-PT_OLDESP;\ + CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\ + CFI_OFFSET edi, PT_EDI-PT_OLDESP;\ + CFI_OFFSET esi, PT_ESI-PT_OLDESP;\ + CFI_OFFSET edx, PT_EDX-PT_OLDESP;\ + CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\ + CFI_OFFSET ebx, PT_EBX-PT_OLDESP + +ENTRY(ret_from_fork) + CFI_STARTPROC + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + call schedule_tail + GET_THREAD_INFO(%ebp) + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + pushl $0x0202 # Reset kernel eflags + CFI_ADJUST_CFA_OFFSET 4 + popfl + CFI_ADJUST_CFA_OFFSET -4 + jmp syscall_exit + CFI_ENDPROC +END(ret_from_fork) + +/* + * Return to user mode is not as complex as all this looks, + * but we want the default path for a system call return to + * go as quickly as possible which is why some of this is + * less clear than it otherwise should be. + */ + + # userspace resumption stub bypassing syscall exit tracing + ALIGN + RING0_PTREGS_FRAME +ret_from_exception: + preempt_stop(CLBR_ANY) +ret_from_intr: + GET_THREAD_INFO(%ebp) +check_userspace: + movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS + movb PT_CS(%esp), %al + andl $(VM_MASK | SEGMENT_RPL_MASK), %eax + cmpl $USER_RPL, %eax + jb resume_kernel # not returning to v8086 or userspace + +ENTRY(resume_userspace) + DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt + # setting need_resched or sigpending + # between sampling and the iret + movl TI_flags(%ebp), %ecx + andl $_TIF_WORK_MASK, %ecx # is there any work to be done on + # int/exception return? + jne work_pending + jmp restore_all +END(ret_from_exception) + +#ifdef CONFIG_PREEMPT +ENTRY(resume_kernel) + DISABLE_INTERRUPTS(CLBR_ANY) + cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ? + jnz restore_nocheck +need_resched: + movl TI_flags(%ebp), %ecx # need_resched set ? + testb $_TIF_NEED_RESCHED, %cl + jz restore_all + testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off (exception path) ? + jz restore_all + call preempt_schedule_irq + jmp need_resched +END(resume_kernel) +#endif + CFI_ENDPROC + +/* SYSENTER_RETURN points to after the "sysenter" instruction in + the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */ + + # sysenter call handler stub +ENTRY(sysenter_entry) + CFI_STARTPROC simple + CFI_SIGNAL_FRAME + CFI_DEF_CFA esp, 0 + CFI_REGISTER esp, ebp + movl TSS_sysenter_esp0(%esp),%esp +sysenter_past_esp: + /* + * No need to follow this irqs on/off section: the syscall + * disabled irqs and here we enable it straight after entry: + */ + ENABLE_INTERRUPTS(CLBR_NONE) + pushl $(__USER_DS) + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET ss, 0*/ + pushl %ebp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET esp, 0 + pushfl + CFI_ADJUST_CFA_OFFSET 4 + pushl $(__USER_CS) + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET cs, 0*/ + /* + * Push current_thread_info()->sysenter_return to the stack. + * A tiny bit of offset fixup is necessary - 4*4 means the 4 words + * pushed above; +8 corresponds to copy_thread's esp0 setting. + */ + pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp) + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET eip, 0 + +/* + * Load the potential sixth argument from user stack. + * Careful about security. + */ + cmpl $__PAGE_OFFSET-3,%ebp + jae syscall_fault +1: movl (%ebp),%ebp +.section __ex_table,"a" + .align 4 + .long 1b,syscall_fault +.previous + + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + GET_THREAD_INFO(%ebp) + + /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ + testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) + jnz syscall_trace_entry + cmpl $(nr_syscalls), %eax + jae syscall_badsys + call *sys_call_table(,%eax,4) + movl %eax,PT_EAX(%esp) + DISABLE_INTERRUPTS(CLBR_ANY) + TRACE_IRQS_OFF + movl TI_flags(%ebp), %ecx + testw $_TIF_ALLWORK_MASK, %cx + jne syscall_exit_work +/* if something modifies registers it must also disable sysexit */ + movl PT_EIP(%esp), %edx + movl PT_OLDESP(%esp), %ecx + xorl %ebp,%ebp + TRACE_IRQS_ON +1: mov PT_FS(%esp), %fs + ENABLE_INTERRUPTS_SYSEXIT + CFI_ENDPROC +.pushsection .fixup,"ax" +2: movl $0,PT_FS(%esp) + jmp 1b +.section __ex_table,"a" + .align 4 + .long 1b,2b +.popsection +ENDPROC(sysenter_entry) + + # system call handler stub +ENTRY(system_call) + RING0_INT_FRAME # can't unwind into user space anyway + pushl %eax # save orig_eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + GET_THREAD_INFO(%ebp) + # system call tracing in operation / emulation + /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ + testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp) + jnz syscall_trace_entry + cmpl $(nr_syscalls), %eax + jae syscall_badsys +syscall_call: + call *sys_call_table(,%eax,4) + movl %eax,PT_EAX(%esp) # store the return value +syscall_exit: + DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt + # setting need_resched or sigpending + # between sampling and the iret + TRACE_IRQS_OFF + testl $TF_MASK,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit + jz no_singlestep + orl $_TIF_SINGLESTEP,TI_flags(%ebp) +no_singlestep: + movl TI_flags(%ebp), %ecx + testw $_TIF_ALLWORK_MASK, %cx # current->work + jne syscall_exit_work + +restore_all: + movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS + # Warning: PT_OLDSS(%esp) contains the wrong/random values if we + # are returning to the kernel. + # See comments in process.c:copy_thread() for details. + movb PT_OLDSS(%esp), %ah + movb PT_CS(%esp), %al + andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax + cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax + CFI_REMEMBER_STATE + je ldt_ss # returning to user-space with LDT SS +restore_nocheck: + TRACE_IRQS_IRET +restore_nocheck_notrace: + RESTORE_REGS + addl $4, %esp # skip orig_eax/error_code + CFI_ADJUST_CFA_OFFSET -4 +1: INTERRUPT_RETURN +.section .fixup,"ax" +iret_exc: + pushl $0 # no error code + pushl $do_iret_error + jmp error_code +.previous +.section __ex_table,"a" + .align 4 + .long 1b,iret_exc +.previous + + CFI_RESTORE_STATE +ldt_ss: + larl PT_OLDSS(%esp), %eax + jnz restore_nocheck + testl $0x00400000, %eax # returning to 32bit stack? + jnz restore_nocheck # allright, normal return + +#ifdef CONFIG_PARAVIRT + /* + * The kernel can't run on a non-flat stack if paravirt mode + * is active. Rather than try to fixup the high bits of + * ESP, bypass this code entirely. This may break DOSemu + * and/or Wine support in a paravirt VM, although the option + * is still available to implement the setting of the high + * 16-bits in the INTERRUPT_RETURN paravirt-op. + */ + cmpl $0, paravirt_ops+PARAVIRT_enabled + jne restore_nocheck +#endif + + /* If returning to userspace with 16bit stack, + * try to fix the higher word of ESP, as the CPU + * won't restore it. + * This is an "official" bug of all the x86-compatible + * CPUs, which we can try to work around to make + * dosemu and wine happy. */ + movl PT_OLDESP(%esp), %eax + movl %esp, %edx + call patch_espfix_desc + pushl $__ESPFIX_SS + CFI_ADJUST_CFA_OFFSET 4 + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + DISABLE_INTERRUPTS(CLBR_EAX) + TRACE_IRQS_OFF + lss (%esp), %esp + CFI_ADJUST_CFA_OFFSET -8 + jmp restore_nocheck + CFI_ENDPROC +ENDPROC(system_call) + + # perform work that needs to be done immediately before resumption + ALIGN + RING0_PTREGS_FRAME # can't unwind into user space anyway +work_pending: + testb $_TIF_NEED_RESCHED, %cl + jz work_notifysig +work_resched: + call schedule + DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt + # setting need_resched or sigpending + # between sampling and the iret + TRACE_IRQS_OFF + movl TI_flags(%ebp), %ecx + andl $_TIF_WORK_MASK, %ecx # is there any work to be done other + # than syscall tracing? + jz restore_all + testb $_TIF_NEED_RESCHED, %cl + jnz work_resched + +work_notifysig: # deal with pending signals and + # notify-resume requests +#ifdef CONFIG_VM86 + testl $VM_MASK, PT_EFLAGS(%esp) + movl %esp, %eax + jne work_notifysig_v86 # returning to kernel-space or + # vm86-space + xorl %edx, %edx + call do_notify_resume + jmp resume_userspace_sig + + ALIGN +work_notifysig_v86: + pushl %ecx # save ti_flags for do_notify_resume + CFI_ADJUST_CFA_OFFSET 4 + call save_v86_state # %eax contains pt_regs pointer + popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + movl %eax, %esp +#else + movl %esp, %eax +#endif + xorl %edx, %edx + call do_notify_resume + jmp resume_userspace_sig +END(work_pending) + + # perform syscall exit tracing + ALIGN +syscall_trace_entry: + movl $-ENOSYS,PT_EAX(%esp) + movl %esp, %eax + xorl %edx,%edx + call do_syscall_trace + cmpl $0, %eax + jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU, + # so must skip actual syscall + movl PT_ORIG_EAX(%esp), %eax + cmpl $(nr_syscalls), %eax + jnae syscall_call + jmp syscall_exit +END(syscall_trace_entry) + + # perform syscall exit tracing + ALIGN +syscall_exit_work: + testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl + jz work_pending + TRACE_IRQS_ON + ENABLE_INTERRUPTS(CLBR_ANY) # could let do_syscall_trace() call + # schedule() instead + movl %esp, %eax + movl $1, %edx + call do_syscall_trace + jmp resume_userspace +END(syscall_exit_work) + CFI_ENDPROC + + RING0_INT_FRAME # can't unwind into user space anyway +syscall_fault: + pushl %eax # save orig_eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + GET_THREAD_INFO(%ebp) + movl $-EFAULT,PT_EAX(%esp) + jmp resume_userspace +END(syscall_fault) + +syscall_badsys: + movl $-ENOSYS,PT_EAX(%esp) + jmp resume_userspace +END(syscall_badsys) + CFI_ENDPROC + +#define FIXUP_ESPFIX_STACK \ + /* since we are on a wrong stack, we cant make it a C code :( */ \ + PER_CPU(gdt_page, %ebx); \ + GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \ + addl %esp, %eax; \ + pushl $__KERNEL_DS; \ + CFI_ADJUST_CFA_OFFSET 4; \ + pushl %eax; \ + CFI_ADJUST_CFA_OFFSET 4; \ + lss (%esp), %esp; \ + CFI_ADJUST_CFA_OFFSET -8; +#define UNWIND_ESPFIX_STACK \ + movl %ss, %eax; \ + /* see if on espfix stack */ \ + cmpw $__ESPFIX_SS, %ax; \ + jne 27f; \ + movl $__KERNEL_DS, %eax; \ + movl %eax, %ds; \ + movl %eax, %es; \ + /* switch to normal stack */ \ + FIXUP_ESPFIX_STACK; \ +27:; + +/* + * Build the entry stubs and pointer table with + * some assembler magic. + */ +.data +ENTRY(interrupt) +.text + +ENTRY(irq_entries_start) + RING0_INT_FRAME +vector=0 +.rept NR_IRQS + ALIGN + .if vector + CFI_ADJUST_CFA_OFFSET -4 + .endif +1: pushl $~(vector) + CFI_ADJUST_CFA_OFFSET 4 + jmp common_interrupt + .previous + .long 1b + .text +vector=vector+1 +.endr +END(irq_entries_start) + +.previous +END(interrupt) +.previous + +/* + * the CPU automatically disables interrupts when executing an IRQ vector, + * so IRQ-flags tracing has to follow that: + */ + ALIGN +common_interrupt: + SAVE_ALL + TRACE_IRQS_OFF + movl %esp,%eax + call do_IRQ + jmp ret_from_intr +ENDPROC(common_interrupt) + CFI_ENDPROC + +#define BUILD_INTERRUPT(name, nr) \ +ENTRY(name) \ + RING0_INT_FRAME; \ + pushl $~(nr); \ + CFI_ADJUST_CFA_OFFSET 4; \ + SAVE_ALL; \ + TRACE_IRQS_OFF \ + movl %esp,%eax; \ + call smp_##name; \ + jmp ret_from_intr; \ + CFI_ENDPROC; \ +ENDPROC(name) + +/* The include is where all of the SMP etc. interrupts come from */ +#include "entry_arch.h" + +KPROBE_ENTRY(page_fault) + RING0_EC_FRAME + pushl $do_page_fault + CFI_ADJUST_CFA_OFFSET 4 + ALIGN +error_code: + /* the function address is in %fs's slot on the stack */ + pushl %es + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET es, 0*/ + pushl %ds + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET ds, 0*/ + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET eax, 0 + pushl %ebp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebp, 0 + pushl %edi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edi, 0 + pushl %esi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET esi, 0 + pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx, 0 + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx, 0 + pushl %ebx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebx, 0 + cld + pushl %fs + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET fs, 0*/ + movl $(__KERNEL_PERCPU), %ecx + movl %ecx, %fs + UNWIND_ESPFIX_STACK + popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + /*CFI_REGISTER es, ecx*/ + movl PT_FS(%esp), %edi # get the function address + movl PT_ORIG_EAX(%esp), %edx # get the error code + movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart + mov %ecx, PT_FS(%esp) + /*CFI_REL_OFFSET fs, ES*/ + movl $(__USER_DS), %ecx + movl %ecx, %ds + movl %ecx, %es + movl %esp,%eax # pt_regs pointer + call *%edi + jmp ret_from_exception + CFI_ENDPROC +KPROBE_END(page_fault) + +ENTRY(coprocessor_error) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_coprocessor_error + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(coprocessor_error) + +ENTRY(simd_coprocessor_error) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_simd_coprocessor_error + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(simd_coprocessor_error) + +ENTRY(device_not_available) + RING0_INT_FRAME + pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + GET_CR0_INTO_EAX + testl $0x4, %eax # EM (math emulation bit) + jne device_not_available_emulate + preempt_stop(CLBR_ANY) + call math_state_restore + jmp ret_from_exception +device_not_available_emulate: + pushl $0 # temporary storage for ORIG_EIP + CFI_ADJUST_CFA_OFFSET 4 + call math_emulate + addl $4, %esp + CFI_ADJUST_CFA_OFFSET -4 + jmp ret_from_exception + CFI_ENDPROC +END(device_not_available) + +/* + * Debug traps and NMI can happen at the one SYSENTER instruction + * that sets up the real kernel stack. Check here, since we can't + * allow the wrong stack to be used. + * + * "TSS_sysenter_esp0+12" is because the NMI/debug handler will have + * already pushed 3 words if it hits on the sysenter instruction: + * eflags, cs and eip. + * + * We just load the right stack, and push the three (known) values + * by hand onto the new stack - while updating the return eip past + * the instruction that would have done it for sysenter. + */ +#define FIX_STACK(offset, ok, label) \ + cmpw $__KERNEL_CS,4(%esp); \ + jne ok; \ +label: \ + movl TSS_sysenter_esp0+offset(%esp),%esp; \ + CFI_DEF_CFA esp, 0; \ + CFI_UNDEFINED eip; \ + pushfl; \ + CFI_ADJUST_CFA_OFFSET 4; \ + pushl $__KERNEL_CS; \ + CFI_ADJUST_CFA_OFFSET 4; \ + pushl $sysenter_past_esp; \ + CFI_ADJUST_CFA_OFFSET 4; \ + CFI_REL_OFFSET eip, 0 + +KPROBE_ENTRY(debug) + RING0_INT_FRAME + cmpl $sysenter_entry,(%esp) + jne debug_stack_correct + FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn) +debug_stack_correct: + pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + xorl %edx,%edx # error code 0 + movl %esp,%eax # pt_regs pointer + call do_debug + jmp ret_from_exception + CFI_ENDPROC +KPROBE_END(debug) + +/* + * NMI is doubly nasty. It can happen _while_ we're handling + * a debug fault, and the debug fault hasn't yet been able to + * clear up the stack. So we first check whether we got an + * NMI on the sysenter entry path, but after that we need to + * check whether we got an NMI on the debug path where the debug + * fault happened on the sysenter path. + */ +KPROBE_ENTRY(nmi) + RING0_INT_FRAME + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + movl %ss, %eax + cmpw $__ESPFIX_SS, %ax + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + je nmi_espfix_stack + cmpl $sysenter_entry,(%esp) + je nmi_stack_fixup + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + movl %esp,%eax + /* Do not access memory above the end of our stack page, + * it might not exist. + */ + andl $(THREAD_SIZE-1),%eax + cmpl $(THREAD_SIZE-20),%eax + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + jae nmi_stack_correct + cmpl $sysenter_entry,12(%esp) + je nmi_debug_stack_check +nmi_stack_correct: + /* We have a RING0_INT_FRAME here */ + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + xorl %edx,%edx # zero error code + movl %esp,%eax # pt_regs pointer + call do_nmi + jmp restore_nocheck_notrace + CFI_ENDPROC + +nmi_stack_fixup: + RING0_INT_FRAME + FIX_STACK(12,nmi_stack_correct, 1) + jmp nmi_stack_correct + +nmi_debug_stack_check: + /* We have a RING0_INT_FRAME here */ + cmpw $__KERNEL_CS,16(%esp) + jne nmi_stack_correct + cmpl $debug,(%esp) + jb nmi_stack_correct + cmpl $debug_esp_fix_insn,(%esp) + ja nmi_stack_correct + FIX_STACK(24,nmi_stack_correct, 1) + jmp nmi_stack_correct + +nmi_espfix_stack: + /* We have a RING0_INT_FRAME here. + * + * create the pointer to lss back + */ + pushl %ss + CFI_ADJUST_CFA_OFFSET 4 + pushl %esp + CFI_ADJUST_CFA_OFFSET 4 + addw $4, (%esp) + /* copy the iret frame of 12 bytes */ + .rept 3 + pushl 16(%esp) + CFI_ADJUST_CFA_OFFSET 4 + .endr + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + FIXUP_ESPFIX_STACK # %eax == %esp + xorl %edx,%edx # zero error code + call do_nmi + RESTORE_REGS + lss 12+4(%esp), %esp # back to espfix stack + CFI_ADJUST_CFA_OFFSET -24 +1: INTERRUPT_RETURN + CFI_ENDPROC +.section __ex_table,"a" + .align 4 + .long 1b,iret_exc +.previous +KPROBE_END(nmi) + +#ifdef CONFIG_PARAVIRT +ENTRY(native_iret) +1: iret +.section __ex_table,"a" + .align 4 + .long 1b,iret_exc +.previous +END(native_iret) + +ENTRY(native_irq_enable_sysexit) + sti + sysexit +END(native_irq_enable_sysexit) +#endif + +KPROBE_ENTRY(int3) + RING0_INT_FRAME + pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + xorl %edx,%edx # zero error code + movl %esp,%eax # pt_regs pointer + call do_int3 + jmp ret_from_exception + CFI_ENDPROC +KPROBE_END(int3) + +ENTRY(overflow) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_overflow + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(overflow) + +ENTRY(bounds) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_bounds + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(bounds) + +ENTRY(invalid_op) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_invalid_op + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(invalid_op) + +ENTRY(coprocessor_segment_overrun) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_coprocessor_segment_overrun + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(coprocessor_segment_overrun) + +ENTRY(invalid_TSS) + RING0_EC_FRAME + pushl $do_invalid_TSS + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(invalid_TSS) + +ENTRY(segment_not_present) + RING0_EC_FRAME + pushl $do_segment_not_present + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(segment_not_present) + +ENTRY(stack_segment) + RING0_EC_FRAME + pushl $do_stack_segment + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(stack_segment) + +KPROBE_ENTRY(general_protection) + RING0_EC_FRAME + pushl $do_general_protection + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +KPROBE_END(general_protection) + +ENTRY(alignment_check) + RING0_EC_FRAME + pushl $do_alignment_check + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(alignment_check) + +ENTRY(divide_error) + RING0_INT_FRAME + pushl $0 # no error code + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_divide_error + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(divide_error) + +#ifdef CONFIG_X86_MCE +ENTRY(machine_check) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl machine_check_vector + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(machine_check) +#endif + +ENTRY(spurious_interrupt_bug) + RING0_INT_FRAME + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + pushl $do_spurious_interrupt_bug + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(spurious_interrupt_bug) + +ENTRY(kernel_thread_helper) + pushl $0 # fake return address for unwinder + CFI_STARTPROC + movl %edx,%eax + push %edx + CFI_ADJUST_CFA_OFFSET 4 + call *%ebx + push %eax + CFI_ADJUST_CFA_OFFSET 4 + call do_exit + CFI_ENDPROC +ENDPROC(kernel_thread_helper) + +#ifdef CONFIG_XEN +ENTRY(xen_hypervisor_callback) + CFI_STARTPROC + pushl $0 + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + TRACE_IRQS_OFF + + /* Check to see if we got the event in the critical + region in xen_iret_direct, after we've reenabled + events and checked for pending events. This simulates + iret instruction's behaviour where it delivers a + pending interrupt when enabling interrupts. */ + movl PT_EIP(%esp),%eax + cmpl $xen_iret_start_crit,%eax + jb 1f + cmpl $xen_iret_end_crit,%eax + jae 1f + + call xen_iret_crit_fixup + +1: mov %esp, %eax + call xen_evtchn_do_upcall + jmp ret_from_intr + CFI_ENDPROC +ENDPROC(xen_hypervisor_callback) + +# Hypervisor uses this for application faults while it executes. +# We get here for two reasons: +# 1. Fault while reloading DS, ES, FS or GS +# 2. Fault while executing IRET +# Category 1 we fix up by reattempting the load, and zeroing the segment +# register if the load fails. +# Category 2 we fix up by jumping to do_iret_error. We cannot use the +# normal Linux return path in this case because if we use the IRET hypercall +# to pop the stack frame we end up in an infinite loop of failsafe callbacks. +# We distinguish between categories by maintaining a status value in EAX. +ENTRY(xen_failsafe_callback) + CFI_STARTPROC + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + movl $1,%eax +1: mov 4(%esp),%ds +2: mov 8(%esp),%es +3: mov 12(%esp),%fs +4: mov 16(%esp),%gs + testl %eax,%eax + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + lea 16(%esp),%esp + CFI_ADJUST_CFA_OFFSET -16 + jz 5f + addl $16,%esp + jmp iret_exc # EAX != 0 => Category 2 (Bad IRET) +5: pushl $0 # EAX == 0 => Category 1 (Bad segment) + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + jmp ret_from_exception + CFI_ENDPROC + +.section .fixup,"ax" +6: xorl %eax,%eax + movl %eax,4(%esp) + jmp 1b +7: xorl %eax,%eax + movl %eax,8(%esp) + jmp 2b +8: xorl %eax,%eax + movl %eax,12(%esp) + jmp 3b +9: xorl %eax,%eax + movl %eax,16(%esp) + jmp 4b +.previous +.section __ex_table,"a" + .align 4 + .long 1b,6b + .long 2b,7b + .long 3b,8b + .long 4b,9b +.previous +ENDPROC(xen_failsafe_callback) + +#endif /* CONFIG_XEN */ + +.section .rodata,"a" +#include "syscall_table_32.S" + +syscall_table_size=(.-sys_call_table) diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S new file mode 100644 index 000000000000..1d232e5f5658 --- /dev/null +++ b/arch/x86/kernel/entry_64.S @@ -0,0 +1,1172 @@ +/* + * linux/arch/x86_64/entry.S + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs + * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> + */ + +/* + * entry.S contains the system-call and fault low-level handling routines. + * + * NOTE: This code handles signal-recognition, which happens every time + * after an interrupt and after each system call. + * + * Normal syscalls and interrupts don't save a full stack frame, this is + * only done for syscall tracing, signals or fork/exec et.al. + * + * A note on terminology: + * - top of stack: Architecture defined interrupt frame from SS to RIP + * at the top of the kernel process stack. + * - partial stack frame: partially saved registers upto R11. + * - full stack frame: Like partial stack frame, but all register saved. + * + * Some macro usage: + * - CFI macros are used to generate dwarf2 unwind information for better + * backtraces. They don't change any code. + * - SAVE_ALL/RESTORE_ALL - Save/restore all registers + * - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify. + * There are unfortunately lots of special cases where some registers + * not touched. The macro is a big mess that should be cleaned up. + * - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS. + * Gives a full stack frame. + * - ENTRY/END Define functions in the symbol table. + * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack + * frame that is otherwise undefined after a SYSCALL + * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging. + * - errorentry/paranoidentry/zeroentry - Define exception entry points. + */ + +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/cache.h> +#include <asm/errno.h> +#include <asm/dwarf2.h> +#include <asm/calling.h> +#include <asm/asm-offsets.h> +#include <asm/msr.h> +#include <asm/unistd.h> +#include <asm/thread_info.h> +#include <asm/hw_irq.h> +#include <asm/page.h> +#include <asm/irqflags.h> + + .code64 + +#ifndef CONFIG_PREEMPT +#define retint_kernel retint_restore_args +#endif + + +.macro TRACE_IRQS_IRETQ offset=ARGOFFSET +#ifdef CONFIG_TRACE_IRQFLAGS + bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */ + jnc 1f + TRACE_IRQS_ON +1: +#endif +.endm + +/* + * C code is not supposed to know about undefined top of stack. Every time + * a C function with an pt_regs argument is called from the SYSCALL based + * fast path FIXUP_TOP_OF_STACK is needed. + * RESTORE_TOP_OF_STACK syncs the syscall state after any possible ptregs + * manipulation. + */ + + /* %rsp:at FRAMEEND */ + .macro FIXUP_TOP_OF_STACK tmp + movq %gs:pda_oldrsp,\tmp + movq \tmp,RSP(%rsp) + movq $__USER_DS,SS(%rsp) + movq $__USER_CS,CS(%rsp) + movq $-1,RCX(%rsp) + movq R11(%rsp),\tmp /* get eflags */ + movq \tmp,EFLAGS(%rsp) + .endm + + .macro RESTORE_TOP_OF_STACK tmp,offset=0 + movq RSP-\offset(%rsp),\tmp + movq \tmp,%gs:pda_oldrsp + movq EFLAGS-\offset(%rsp),\tmp + movq \tmp,R11-\offset(%rsp) + .endm + + .macro FAKE_STACK_FRAME child_rip + /* push in order ss, rsp, eflags, cs, rip */ + xorl %eax, %eax + pushq %rax /* ss */ + CFI_ADJUST_CFA_OFFSET 8 + /*CFI_REL_OFFSET ss,0*/ + pushq %rax /* rsp */ + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rsp,0 + pushq $(1<<9) /* eflags - interrupts on */ + CFI_ADJUST_CFA_OFFSET 8 + /*CFI_REL_OFFSET rflags,0*/ + pushq $__KERNEL_CS /* cs */ + CFI_ADJUST_CFA_OFFSET 8 + /*CFI_REL_OFFSET cs,0*/ + pushq \child_rip /* rip */ + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rip,0 + pushq %rax /* orig rax */ + CFI_ADJUST_CFA_OFFSET 8 + .endm + + .macro UNFAKE_STACK_FRAME + addq $8*6, %rsp + CFI_ADJUST_CFA_OFFSET -(6*8) + .endm + + .macro CFI_DEFAULT_STACK start=1 + .if \start + CFI_STARTPROC simple + CFI_SIGNAL_FRAME + CFI_DEF_CFA rsp,SS+8 + .else + CFI_DEF_CFA_OFFSET SS+8 + .endif + CFI_REL_OFFSET r15,R15 + CFI_REL_OFFSET r14,R14 + CFI_REL_OFFSET r13,R13 + CFI_REL_OFFSET r12,R12 + CFI_REL_OFFSET rbp,RBP + CFI_REL_OFFSET rbx,RBX + CFI_REL_OFFSET r11,R11 + CFI_REL_OFFSET r10,R10 + CFI_REL_OFFSET r9,R9 + CFI_REL_OFFSET r8,R8 + CFI_REL_OFFSET rax,RAX + CFI_REL_OFFSET rcx,RCX + CFI_REL_OFFSET rdx,RDX + CFI_REL_OFFSET rsi,RSI + CFI_REL_OFFSET rdi,RDI + CFI_REL_OFFSET rip,RIP + /*CFI_REL_OFFSET cs,CS*/ + /*CFI_REL_OFFSET rflags,EFLAGS*/ + CFI_REL_OFFSET rsp,RSP + /*CFI_REL_OFFSET ss,SS*/ + .endm +/* + * A newly forked process directly context switches into this. + */ +/* rdi: prev */ +ENTRY(ret_from_fork) + CFI_DEFAULT_STACK + push kernel_eflags(%rip) + CFI_ADJUST_CFA_OFFSET 4 + popf # reset kernel eflags + CFI_ADJUST_CFA_OFFSET -4 + call schedule_tail + GET_THREAD_INFO(%rcx) + testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx) + jnz rff_trace +rff_action: + RESTORE_REST + testl $3,CS-ARGOFFSET(%rsp) # from kernel_thread? + je int_ret_from_sys_call + testl $_TIF_IA32,threadinfo_flags(%rcx) + jnz int_ret_from_sys_call + RESTORE_TOP_OF_STACK %rdi,ARGOFFSET + jmp ret_from_sys_call +rff_trace: + movq %rsp,%rdi + call syscall_trace_leave + GET_THREAD_INFO(%rcx) + jmp rff_action + CFI_ENDPROC +END(ret_from_fork) + +/* + * System call entry. Upto 6 arguments in registers are supported. + * + * SYSCALL does not save anything on the stack and does not change the + * stack pointer. + */ + +/* + * Register setup: + * rax system call number + * rdi arg0 + * rcx return address for syscall/sysret, C arg3 + * rsi arg1 + * rdx arg2 + * r10 arg3 (--> moved to rcx for C) + * r8 arg4 + * r9 arg5 + * r11 eflags for syscall/sysret, temporary for C + * r12-r15,rbp,rbx saved by C code, not touched. + * + * Interrupts are off on entry. + * Only called from user space. + * + * XXX if we had a free scratch register we could save the RSP into the stack frame + * and report it properly in ps. Unfortunately we haven't. + * + * When user can change the frames always force IRET. That is because + * it deals with uncanonical addresses better. SYSRET has trouble + * with them due to bugs in both AMD and Intel CPUs. + */ + +ENTRY(system_call) + CFI_STARTPROC simple + CFI_SIGNAL_FRAME + CFI_DEF_CFA rsp,PDA_STACKOFFSET + CFI_REGISTER rip,rcx + /*CFI_REGISTER rflags,r11*/ + swapgs + movq %rsp,%gs:pda_oldrsp + movq %gs:pda_kernelstack,%rsp + /* + * No need to follow this irqs off/on section - it's straight + * and short: + */ + sti + SAVE_ARGS 8,1 + movq %rax,ORIG_RAX-ARGOFFSET(%rsp) + movq %rcx,RIP-ARGOFFSET(%rsp) + CFI_REL_OFFSET rip,RIP-ARGOFFSET + GET_THREAD_INFO(%rcx) + testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx) + jnz tracesys + cmpq $__NR_syscall_max,%rax + ja badsys + movq %r10,%rcx + call *sys_call_table(,%rax,8) # XXX: rip relative + movq %rax,RAX-ARGOFFSET(%rsp) +/* + * Syscall return path ending with SYSRET (fast path) + * Has incomplete stack frame and undefined top of stack. + */ +ret_from_sys_call: + movl $_TIF_ALLWORK_MASK,%edi + /* edi: flagmask */ +sysret_check: + GET_THREAD_INFO(%rcx) + cli + TRACE_IRQS_OFF + movl threadinfo_flags(%rcx),%edx + andl %edi,%edx + jnz sysret_careful + CFI_REMEMBER_STATE + /* + * sysretq will re-enable interrupts: + */ + TRACE_IRQS_ON + movq RIP-ARGOFFSET(%rsp),%rcx + CFI_REGISTER rip,rcx + RESTORE_ARGS 0,-ARG_SKIP,1 + /*CFI_REGISTER rflags,r11*/ + movq %gs:pda_oldrsp,%rsp + swapgs + sysretq + + CFI_RESTORE_STATE + /* Handle reschedules */ + /* edx: work, edi: workmask */ +sysret_careful: + bt $TIF_NEED_RESCHED,%edx + jnc sysret_signal + TRACE_IRQS_ON + sti + pushq %rdi + CFI_ADJUST_CFA_OFFSET 8 + call schedule + popq %rdi + CFI_ADJUST_CFA_OFFSET -8 + jmp sysret_check + + /* Handle a signal */ +sysret_signal: + TRACE_IRQS_ON + sti + testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx + jz 1f + + /* Really a signal */ + /* edx: work flags (arg3) */ + leaq do_notify_resume(%rip),%rax + leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1 + xorl %esi,%esi # oldset -> arg2 + call ptregscall_common +1: movl $_TIF_NEED_RESCHED,%edi + /* Use IRET because user could have changed frame. This + works because ptregscall_common has called FIXUP_TOP_OF_STACK. */ + cli + TRACE_IRQS_OFF + jmp int_with_check + +badsys: + movq $-ENOSYS,RAX-ARGOFFSET(%rsp) + jmp ret_from_sys_call + + /* Do syscall tracing */ +tracesys: + SAVE_REST + movq $-ENOSYS,RAX(%rsp) + FIXUP_TOP_OF_STACK %rdi + movq %rsp,%rdi + call syscall_trace_enter + LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */ + RESTORE_REST + cmpq $__NR_syscall_max,%rax + movq $-ENOSYS,%rcx + cmova %rcx,%rax + ja 1f + movq %r10,%rcx /* fixup for C */ + call *sys_call_table(,%rax,8) +1: movq %rax,RAX-ARGOFFSET(%rsp) + /* Use IRET because user could have changed frame */ + +/* + * Syscall return path ending with IRET. + * Has correct top of stack, but partial stack frame. + */ + .globl int_ret_from_sys_call +int_ret_from_sys_call: + cli + TRACE_IRQS_OFF + testl $3,CS-ARGOFFSET(%rsp) + je retint_restore_args + movl $_TIF_ALLWORK_MASK,%edi + /* edi: mask to check */ +int_with_check: + GET_THREAD_INFO(%rcx) + movl threadinfo_flags(%rcx),%edx + andl %edi,%edx + jnz int_careful + andl $~TS_COMPAT,threadinfo_status(%rcx) + jmp retint_swapgs + + /* Either reschedule or signal or syscall exit tracking needed. */ + /* First do a reschedule test. */ + /* edx: work, edi: workmask */ +int_careful: + bt $TIF_NEED_RESCHED,%edx + jnc int_very_careful + TRACE_IRQS_ON + sti + pushq %rdi + CFI_ADJUST_CFA_OFFSET 8 + call schedule + popq %rdi + CFI_ADJUST_CFA_OFFSET -8 + cli + TRACE_IRQS_OFF + jmp int_with_check + + /* handle signals and tracing -- both require a full stack frame */ +int_very_careful: + TRACE_IRQS_ON + sti + SAVE_REST + /* Check for syscall exit trace */ + testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx + jz int_signal + pushq %rdi + CFI_ADJUST_CFA_OFFSET 8 + leaq 8(%rsp),%rdi # &ptregs -> arg1 + call syscall_trace_leave + popq %rdi + CFI_ADJUST_CFA_OFFSET -8 + andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi + jmp int_restore_rest + +int_signal: + testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx + jz 1f + movq %rsp,%rdi # &ptregs -> arg1 + xorl %esi,%esi # oldset -> arg2 + call do_notify_resume +1: movl $_TIF_NEED_RESCHED,%edi +int_restore_rest: + RESTORE_REST + cli + TRACE_IRQS_OFF + jmp int_with_check + CFI_ENDPROC +END(system_call) + +/* + * Certain special system calls that need to save a complete full stack frame. + */ + + .macro PTREGSCALL label,func,arg + .globl \label +\label: + leaq \func(%rip),%rax + leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */ + jmp ptregscall_common +END(\label) + .endm + + CFI_STARTPROC + + PTREGSCALL stub_clone, sys_clone, %r8 + PTREGSCALL stub_fork, sys_fork, %rdi + PTREGSCALL stub_vfork, sys_vfork, %rdi + PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx + PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx + PTREGSCALL stub_iopl, sys_iopl, %rsi + +ENTRY(ptregscall_common) + popq %r11 + CFI_ADJUST_CFA_OFFSET -8 + CFI_REGISTER rip, r11 + SAVE_REST + movq %r11, %r15 + CFI_REGISTER rip, r15 + FIXUP_TOP_OF_STACK %r11 + call *%rax + RESTORE_TOP_OF_STACK %r11 + movq %r15, %r11 + CFI_REGISTER rip, r11 + RESTORE_REST + pushq %r11 + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rip, 0 + ret + CFI_ENDPROC +END(ptregscall_common) + +ENTRY(stub_execve) + CFI_STARTPROC + popq %r11 + CFI_ADJUST_CFA_OFFSET -8 + CFI_REGISTER rip, r11 + SAVE_REST + FIXUP_TOP_OF_STACK %r11 + call sys_execve + RESTORE_TOP_OF_STACK %r11 + movq %rax,RAX(%rsp) + RESTORE_REST + jmp int_ret_from_sys_call + CFI_ENDPROC +END(stub_execve) + +/* + * sigreturn is special because it needs to restore all registers on return. + * This cannot be done with SYSRET, so use the IRET return path instead. + */ +ENTRY(stub_rt_sigreturn) + CFI_STARTPROC + addq $8, %rsp + CFI_ADJUST_CFA_OFFSET -8 + SAVE_REST + movq %rsp,%rdi + FIXUP_TOP_OF_STACK %r11 + call sys_rt_sigreturn + movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer + RESTORE_REST + jmp int_ret_from_sys_call + CFI_ENDPROC +END(stub_rt_sigreturn) + +/* + * initial frame state for interrupts and exceptions + */ + .macro _frame ref + CFI_STARTPROC simple + CFI_SIGNAL_FRAME + CFI_DEF_CFA rsp,SS+8-\ref + /*CFI_REL_OFFSET ss,SS-\ref*/ + CFI_REL_OFFSET rsp,RSP-\ref + /*CFI_REL_OFFSET rflags,EFLAGS-\ref*/ + /*CFI_REL_OFFSET cs,CS-\ref*/ + CFI_REL_OFFSET rip,RIP-\ref + .endm + +/* initial frame state for interrupts (and exceptions without error code) */ +#define INTR_FRAME _frame RIP +/* initial frame state for exceptions with error code (and interrupts with + vector already pushed) */ +#define XCPT_FRAME _frame ORIG_RAX + +/* + * Interrupt entry/exit. + * + * Interrupt entry points save only callee clobbered registers in fast path. + * + * Entry runs with interrupts off. + */ + +/* 0(%rsp): interrupt number */ + .macro interrupt func + cld + SAVE_ARGS + leaq -ARGOFFSET(%rsp),%rdi # arg1 for handler + pushq %rbp + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rbp, 0 + movq %rsp,%rbp + CFI_DEF_CFA_REGISTER rbp + testl $3,CS(%rdi) + je 1f + swapgs + /* irqcount is used to check if a CPU is already on an interrupt + stack or not. While this is essentially redundant with preempt_count + it is a little cheaper to use a separate counter in the PDA + (short of moving irq_enter into assembly, which would be too + much work) */ +1: incl %gs:pda_irqcount + cmoveq %gs:pda_irqstackptr,%rsp + push %rbp # backlink for old unwinder + /* + * We entered an interrupt context - irqs are off: + */ + TRACE_IRQS_OFF + call \func + .endm + +ENTRY(common_interrupt) + XCPT_FRAME + interrupt do_IRQ + /* 0(%rsp): oldrsp-ARGOFFSET */ +ret_from_intr: + cli + TRACE_IRQS_OFF + decl %gs:pda_irqcount + leaveq + CFI_DEF_CFA_REGISTER rsp + CFI_ADJUST_CFA_OFFSET -8 +exit_intr: + GET_THREAD_INFO(%rcx) + testl $3,CS-ARGOFFSET(%rsp) + je retint_kernel + + /* Interrupt came from user space */ + /* + * Has a correct top of stack, but a partial stack frame + * %rcx: thread info. Interrupts off. + */ +retint_with_reschedule: + movl $_TIF_WORK_MASK,%edi +retint_check: + movl threadinfo_flags(%rcx),%edx + andl %edi,%edx + CFI_REMEMBER_STATE + jnz retint_careful +retint_swapgs: + /* + * The iretq could re-enable interrupts: + */ + cli + TRACE_IRQS_IRETQ + swapgs + jmp restore_args + +retint_restore_args: + cli + /* + * The iretq could re-enable interrupts: + */ + TRACE_IRQS_IRETQ +restore_args: + RESTORE_ARGS 0,8,0 +iret_label: + iretq + + .section __ex_table,"a" + .quad iret_label,bad_iret + .previous + .section .fixup,"ax" + /* force a signal here? this matches i386 behaviour */ + /* running with kernel gs */ +bad_iret: + movq $11,%rdi /* SIGSEGV */ + TRACE_IRQS_ON + sti + jmp do_exit + .previous + + /* edi: workmask, edx: work */ +retint_careful: + CFI_RESTORE_STATE + bt $TIF_NEED_RESCHED,%edx + jnc retint_signal + TRACE_IRQS_ON + sti + pushq %rdi + CFI_ADJUST_CFA_OFFSET 8 + call schedule + popq %rdi + CFI_ADJUST_CFA_OFFSET -8 + GET_THREAD_INFO(%rcx) + cli + TRACE_IRQS_OFF + jmp retint_check + +retint_signal: + testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx + jz retint_swapgs + TRACE_IRQS_ON + sti + SAVE_REST + movq $-1,ORIG_RAX(%rsp) + xorl %esi,%esi # oldset + movq %rsp,%rdi # &pt_regs + call do_notify_resume + RESTORE_REST + cli + TRACE_IRQS_OFF + movl $_TIF_NEED_RESCHED,%edi + GET_THREAD_INFO(%rcx) + jmp retint_check + +#ifdef CONFIG_PREEMPT + /* Returning to kernel space. Check if we need preemption */ + /* rcx: threadinfo. interrupts off. */ +ENTRY(retint_kernel) + cmpl $0,threadinfo_preempt_count(%rcx) + jnz retint_restore_args + bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx) + jnc retint_restore_args + bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */ + jnc retint_restore_args + call preempt_schedule_irq + jmp exit_intr +#endif + + CFI_ENDPROC +END(common_interrupt) + +/* + * APIC interrupts. + */ + .macro apicinterrupt num,func + INTR_FRAME + pushq $~(\num) + CFI_ADJUST_CFA_OFFSET 8 + interrupt \func + jmp ret_from_intr + CFI_ENDPROC + .endm + +ENTRY(thermal_interrupt) + apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt +END(thermal_interrupt) + +ENTRY(threshold_interrupt) + apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt +END(threshold_interrupt) + +#ifdef CONFIG_SMP +ENTRY(reschedule_interrupt) + apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt +END(reschedule_interrupt) + + .macro INVALIDATE_ENTRY num +ENTRY(invalidate_interrupt\num) + apicinterrupt INVALIDATE_TLB_VECTOR_START+\num,smp_invalidate_interrupt +END(invalidate_interrupt\num) + .endm + + INVALIDATE_ENTRY 0 + INVALIDATE_ENTRY 1 + INVALIDATE_ENTRY 2 + INVALIDATE_ENTRY 3 + INVALIDATE_ENTRY 4 + INVALIDATE_ENTRY 5 + INVALIDATE_ENTRY 6 + INVALIDATE_ENTRY 7 + +ENTRY(call_function_interrupt) + apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt +END(call_function_interrupt) +ENTRY(irq_move_cleanup_interrupt) + apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt +END(irq_move_cleanup_interrupt) +#endif + +ENTRY(apic_timer_interrupt) + apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt +END(apic_timer_interrupt) + +ENTRY(error_interrupt) + apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt +END(error_interrupt) + +ENTRY(spurious_interrupt) + apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt +END(spurious_interrupt) + +/* + * Exception entry points. + */ + .macro zeroentry sym + INTR_FRAME + pushq $0 /* push error code/oldrax */ + CFI_ADJUST_CFA_OFFSET 8 + pushq %rax /* push real oldrax to the rdi slot */ + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rax,0 + leaq \sym(%rip),%rax + jmp error_entry + CFI_ENDPROC + .endm + + .macro errorentry sym + XCPT_FRAME + pushq %rax + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rax,0 + leaq \sym(%rip),%rax + jmp error_entry + CFI_ENDPROC + .endm + + /* error code is on the stack already */ + /* handle NMI like exceptions that can happen everywhere */ + .macro paranoidentry sym, ist=0, irqtrace=1 + SAVE_ALL + cld + movl $1,%ebx + movl $MSR_GS_BASE,%ecx + rdmsr + testl %edx,%edx + js 1f + swapgs + xorl %ebx,%ebx +1: + .if \ist + movq %gs:pda_data_offset, %rbp + .endif + movq %rsp,%rdi + movq ORIG_RAX(%rsp),%rsi + movq $-1,ORIG_RAX(%rsp) + .if \ist + subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp) + .endif + call \sym + .if \ist + addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp) + .endif + cli + .if \irqtrace + TRACE_IRQS_OFF + .endif + .endm + + /* + * "Paranoid" exit path from exception stack. + * Paranoid because this is used by NMIs and cannot take + * any kernel state for granted. + * We don't do kernel preemption checks here, because only + * NMI should be common and it does not enable IRQs and + * cannot get reschedule ticks. + * + * "trace" is 0 for the NMI handler only, because irq-tracing + * is fundamentally NMI-unsafe. (we cannot change the soft and + * hard flags at once, atomically) + */ + .macro paranoidexit trace=1 + /* ebx: no swapgs flag */ +paranoid_exit\trace: + testl %ebx,%ebx /* swapgs needed? */ + jnz paranoid_restore\trace + testl $3,CS(%rsp) + jnz paranoid_userspace\trace +paranoid_swapgs\trace: + .if \trace + TRACE_IRQS_IRETQ 0 + .endif + swapgs +paranoid_restore\trace: + RESTORE_ALL 8 + iretq +paranoid_userspace\trace: + GET_THREAD_INFO(%rcx) + movl threadinfo_flags(%rcx),%ebx + andl $_TIF_WORK_MASK,%ebx + jz paranoid_swapgs\trace + movq %rsp,%rdi /* &pt_regs */ + call sync_regs + movq %rax,%rsp /* switch stack for scheduling */ + testl $_TIF_NEED_RESCHED,%ebx + jnz paranoid_schedule\trace + movl %ebx,%edx /* arg3: thread flags */ + .if \trace + TRACE_IRQS_ON + .endif + sti + xorl %esi,%esi /* arg2: oldset */ + movq %rsp,%rdi /* arg1: &pt_regs */ + call do_notify_resume + cli + .if \trace + TRACE_IRQS_OFF + .endif + jmp paranoid_userspace\trace +paranoid_schedule\trace: + .if \trace + TRACE_IRQS_ON + .endif + sti + call schedule + cli + .if \trace + TRACE_IRQS_OFF + .endif + jmp paranoid_userspace\trace + CFI_ENDPROC + .endm + +/* + * Exception entry point. This expects an error code/orig_rax on the stack + * and the exception handler in %rax. + */ +KPROBE_ENTRY(error_entry) + _frame RDI + CFI_REL_OFFSET rax,0 + /* rdi slot contains rax, oldrax contains error code */ + cld + subq $14*8,%rsp + CFI_ADJUST_CFA_OFFSET (14*8) + movq %rsi,13*8(%rsp) + CFI_REL_OFFSET rsi,RSI + movq 14*8(%rsp),%rsi /* load rax from rdi slot */ + CFI_REGISTER rax,rsi + movq %rdx,12*8(%rsp) + CFI_REL_OFFSET rdx,RDX + movq %rcx,11*8(%rsp) + CFI_REL_OFFSET rcx,RCX + movq %rsi,10*8(%rsp) /* store rax */ + CFI_REL_OFFSET rax,RAX + movq %r8, 9*8(%rsp) + CFI_REL_OFFSET r8,R8 + movq %r9, 8*8(%rsp) + CFI_REL_OFFSET r9,R9 + movq %r10,7*8(%rsp) + CFI_REL_OFFSET r10,R10 + movq %r11,6*8(%rsp) + CFI_REL_OFFSET r11,R11 + movq %rbx,5*8(%rsp) + CFI_REL_OFFSET rbx,RBX + movq %rbp,4*8(%rsp) + CFI_REL_OFFSET rbp,RBP + movq %r12,3*8(%rsp) + CFI_REL_OFFSET r12,R12 + movq %r13,2*8(%rsp) + CFI_REL_OFFSET r13,R13 + movq %r14,1*8(%rsp) + CFI_REL_OFFSET r14,R14 + movq %r15,(%rsp) + CFI_REL_OFFSET r15,R15 + xorl %ebx,%ebx + testl $3,CS(%rsp) + je error_kernelspace +error_swapgs: + swapgs +error_sti: + movq %rdi,RDI(%rsp) + CFI_REL_OFFSET rdi,RDI + movq %rsp,%rdi + movq ORIG_RAX(%rsp),%rsi /* get error code */ + movq $-1,ORIG_RAX(%rsp) + call *%rax + /* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */ +error_exit: + movl %ebx,%eax + RESTORE_REST + cli + TRACE_IRQS_OFF + GET_THREAD_INFO(%rcx) + testl %eax,%eax + jne retint_kernel + movl threadinfo_flags(%rcx),%edx + movl $_TIF_WORK_MASK,%edi + andl %edi,%edx + jnz retint_careful + /* + * The iret might restore flags: + */ + TRACE_IRQS_IRETQ + swapgs + RESTORE_ARGS 0,8,0 + jmp iret_label + CFI_ENDPROC + +error_kernelspace: + incl %ebx + /* There are two places in the kernel that can potentially fault with + usergs. Handle them here. The exception handlers after + iret run with kernel gs again, so don't set the user space flag. + B stepping K8s sometimes report an truncated RIP for IRET + exceptions returning to compat mode. Check for these here too. */ + leaq iret_label(%rip),%rbp + cmpq %rbp,RIP(%rsp) + je error_swapgs + movl %ebp,%ebp /* zero extend */ + cmpq %rbp,RIP(%rsp) + je error_swapgs + cmpq $gs_change,RIP(%rsp) + je error_swapgs + jmp error_sti +KPROBE_END(error_entry) + + /* Reload gs selector with exception handling */ + /* edi: new selector */ +ENTRY(load_gs_index) + CFI_STARTPROC + pushf + CFI_ADJUST_CFA_OFFSET 8 + cli + swapgs +gs_change: + movl %edi,%gs +2: mfence /* workaround */ + swapgs + popf + CFI_ADJUST_CFA_OFFSET -8 + ret + CFI_ENDPROC +ENDPROC(load_gs_index) + + .section __ex_table,"a" + .align 8 + .quad gs_change,bad_gs + .previous + .section .fixup,"ax" + /* running with kernelgs */ +bad_gs: + swapgs /* switch back to user gs */ + xorl %eax,%eax + movl %eax,%gs + jmp 2b + .previous + +/* + * Create a kernel thread. + * + * C extern interface: + * extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) + * + * asm input arguments: + * rdi: fn, rsi: arg, rdx: flags + */ +ENTRY(kernel_thread) + CFI_STARTPROC + FAKE_STACK_FRAME $child_rip + SAVE_ALL + + # rdi: flags, rsi: usp, rdx: will be &pt_regs + movq %rdx,%rdi + orq kernel_thread_flags(%rip),%rdi + movq $-1, %rsi + movq %rsp, %rdx + + xorl %r8d,%r8d + xorl %r9d,%r9d + + # clone now + call do_fork + movq %rax,RAX(%rsp) + xorl %edi,%edi + + /* + * It isn't worth to check for reschedule here, + * so internally to the x86_64 port you can rely on kernel_thread() + * not to reschedule the child before returning, this avoids the need + * of hacks for example to fork off the per-CPU idle tasks. + * [Hopefully no generic code relies on the reschedule -AK] + */ + RESTORE_ALL + UNFAKE_STACK_FRAME + ret + CFI_ENDPROC +ENDPROC(kernel_thread) + +child_rip: + pushq $0 # fake return address + CFI_STARTPROC + /* + * Here we are in the child and the registers are set as they were + * at kernel_thread() invocation in the parent. + */ + movq %rdi, %rax + movq %rsi, %rdi + call *%rax + # exit + xorl %edi, %edi + call do_exit + CFI_ENDPROC +ENDPROC(child_rip) + +/* + * execve(). This function needs to use IRET, not SYSRET, to set up all state properly. + * + * C extern interface: + * extern long execve(char *name, char **argv, char **envp) + * + * asm input arguments: + * rdi: name, rsi: argv, rdx: envp + * + * We want to fallback into: + * extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs regs) + * + * do_sys_execve asm fallback arguments: + * rdi: name, rsi: argv, rdx: envp, fake frame on the stack + */ +ENTRY(kernel_execve) + CFI_STARTPROC + FAKE_STACK_FRAME $0 + SAVE_ALL + call sys_execve + movq %rax, RAX(%rsp) + RESTORE_REST + testq %rax,%rax + je int_ret_from_sys_call + RESTORE_ARGS + UNFAKE_STACK_FRAME + ret + CFI_ENDPROC +ENDPROC(kernel_execve) + +KPROBE_ENTRY(page_fault) + errorentry do_page_fault +KPROBE_END(page_fault) + +ENTRY(coprocessor_error) + zeroentry do_coprocessor_error +END(coprocessor_error) + +ENTRY(simd_coprocessor_error) + zeroentry do_simd_coprocessor_error +END(simd_coprocessor_error) + +ENTRY(device_not_available) + zeroentry math_state_restore +END(device_not_available) + + /* runs on exception stack */ +KPROBE_ENTRY(debug) + INTR_FRAME + pushq $0 + CFI_ADJUST_CFA_OFFSET 8 + paranoidentry do_debug, DEBUG_STACK + paranoidexit +KPROBE_END(debug) + + /* runs on exception stack */ +KPROBE_ENTRY(nmi) + INTR_FRAME + pushq $-1 + CFI_ADJUST_CFA_OFFSET 8 + paranoidentry do_nmi, 0, 0 +#ifdef CONFIG_TRACE_IRQFLAGS + paranoidexit 0 +#else + jmp paranoid_exit1 + CFI_ENDPROC +#endif +KPROBE_END(nmi) + +KPROBE_ENTRY(int3) + INTR_FRAME + pushq $0 + CFI_ADJUST_CFA_OFFSET 8 + paranoidentry do_int3, DEBUG_STACK + jmp paranoid_exit1 + CFI_ENDPROC +KPROBE_END(int3) + +ENTRY(overflow) + zeroentry do_overflow +END(overflow) + +ENTRY(bounds) + zeroentry do_bounds +END(bounds) + +ENTRY(invalid_op) + zeroentry do_invalid_op +END(invalid_op) + +ENTRY(coprocessor_segment_overrun) + zeroentry do_coprocessor_segment_overrun +END(coprocessor_segment_overrun) + +ENTRY(reserved) + zeroentry do_reserved +END(reserved) + + /* runs on exception stack */ +ENTRY(double_fault) + XCPT_FRAME + paranoidentry do_double_fault + jmp paranoid_exit1 + CFI_ENDPROC +END(double_fault) + +ENTRY(invalid_TSS) + errorentry do_invalid_TSS +END(invalid_TSS) + +ENTRY(segment_not_present) + errorentry do_segment_not_present +END(segment_not_present) + + /* runs on exception stack */ +ENTRY(stack_segment) + XCPT_FRAME + paranoidentry do_stack_segment + jmp paranoid_exit1 + CFI_ENDPROC +END(stack_segment) + +KPROBE_ENTRY(general_protection) + errorentry do_general_protection +KPROBE_END(general_protection) + +ENTRY(alignment_check) + errorentry do_alignment_check +END(alignment_check) + +ENTRY(divide_error) + zeroentry do_divide_error +END(divide_error) + +ENTRY(spurious_interrupt_bug) + zeroentry do_spurious_interrupt_bug +END(spurious_interrupt_bug) + +#ifdef CONFIG_X86_MCE + /* runs on exception stack */ +ENTRY(machine_check) + INTR_FRAME + pushq $0 + CFI_ADJUST_CFA_OFFSET 8 + paranoidentry do_machine_check + jmp paranoid_exit1 + CFI_ENDPROC +END(machine_check) +#endif + +/* Call softirq on interrupt stack. Interrupts are off. */ +ENTRY(call_softirq) + CFI_STARTPROC + push %rbp + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rbp,0 + mov %rsp,%rbp + CFI_DEF_CFA_REGISTER rbp + incl %gs:pda_irqcount + cmove %gs:pda_irqstackptr,%rsp + push %rbp # backlink for old unwinder + call __do_softirq + leaveq + CFI_DEF_CFA_REGISTER rsp + CFI_ADJUST_CFA_OFFSET -8 + decl %gs:pda_irqcount + ret + CFI_ENDPROC +ENDPROC(call_softirq) + +KPROBE_ENTRY(ignore_sysret) + CFI_STARTPROC + mov $-ENOSYS,%eax + sysret + CFI_ENDPROC +ENDPROC(ignore_sysret) diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c new file mode 100644 index 000000000000..47496a40e84f --- /dev/null +++ b/arch/x86/kernel/genapic_64.c @@ -0,0 +1,66 @@ +/* + * Copyright 2004 James Cleverdon, IBM. + * Subject to the GNU Public License, v.2 + * + * Generic APIC sub-arch probe layer. + * + * Hacked for x86-64 by James Cleverdon from i386 architecture code by + * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and + * James Cleverdon. + */ +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/string.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/init.h> + +#include <asm/smp.h> +#include <asm/ipi.h> +#include <asm/genapic.h> + +#ifdef CONFIG_ACPI +#include <acpi/acpi_bus.h> +#endif + +/* which logical CPU number maps to which CPU (physical APIC ID) */ +u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly + = { [0 ... NR_CPUS-1] = BAD_APICID }; +EXPORT_SYMBOL(x86_cpu_to_apicid); + +u8 x86_cpu_to_log_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; + +struct genapic __read_mostly *genapic = &apic_flat; + +/* + * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode. + */ +void __init setup_apic_routing(void) +{ +#ifdef CONFIG_ACPI + /* + * Quirk: some x86_64 machines can only use physical APIC mode + * regardless of how many processors are present (x86_64 ES7000 + * is an example). + */ + if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && + (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) + genapic = &apic_physflat; + else +#endif + + if (cpus_weight(cpu_possible_map) <= 8) + genapic = &apic_flat; + else + genapic = &apic_physflat; + + printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name); +} + +/* Same for both flat and physical. */ + +void send_IPI_self(int vector) +{ + __send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL); +} diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c new file mode 100644 index 000000000000..ecb01eefdd27 --- /dev/null +++ b/arch/x86/kernel/genapic_flat_64.c @@ -0,0 +1,194 @@ +/* + * Copyright 2004 James Cleverdon, IBM. + * Subject to the GNU Public License, v.2 + * + * Flat APIC subarch code. + * + * Hacked for x86-64 by James Cleverdon from i386 architecture code by + * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and + * James Cleverdon. + */ +#include <linux/errno.h> +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <asm/smp.h> +#include <asm/ipi.h> +#include <asm/genapic.h> + +static cpumask_t flat_target_cpus(void) +{ + return cpu_online_map; +} + +static cpumask_t flat_vector_allocation_domain(int cpu) +{ + /* Careful. Some cpus do not strictly honor the set of cpus + * specified in the interrupt destination when using lowest + * priority interrupt delivery mode. + * + * In particular there was a hyperthreading cpu observed to + * deliver interrupts to the wrong hyperthread when only one + * hyperthread was specified in the interrupt desitination. + */ + cpumask_t domain = { { [0] = APIC_ALL_CPUS, } }; + return domain; +} + +/* + * Set up the logical destination ID. + * + * Intel recommends to set DFR, LDR and TPR before enabling + * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel + * document number 292116). So here it goes... + */ +static void flat_init_apic_ldr(void) +{ + unsigned long val; + unsigned long num, id; + + num = smp_processor_id(); + id = 1UL << num; + x86_cpu_to_log_apicid[num] = id; + apic_write(APIC_DFR, APIC_DFR_FLAT); + val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; + val |= SET_APIC_LOGICAL_ID(id); + apic_write(APIC_LDR, val); +} + +static void flat_send_IPI_mask(cpumask_t cpumask, int vector) +{ + unsigned long mask = cpus_addr(cpumask)[0]; + unsigned long flags; + + local_irq_save(flags); + __send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL); + local_irq_restore(flags); +} + +static void flat_send_IPI_allbutself(int vector) +{ +#ifdef CONFIG_HOTPLUG_CPU + int hotplug = 1; +#else + int hotplug = 0; +#endif + if (hotplug || vector == NMI_VECTOR) { + cpumask_t allbutme = cpu_online_map; + + cpu_clear(smp_processor_id(), allbutme); + + if (!cpus_empty(allbutme)) + flat_send_IPI_mask(allbutme, vector); + } else if (num_online_cpus() > 1) { + __send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL); + } +} + +static void flat_send_IPI_all(int vector) +{ + if (vector == NMI_VECTOR) + flat_send_IPI_mask(cpu_online_map, vector); + else + __send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL); +} + +static int flat_apic_id_registered(void) +{ + return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map); +} + +static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask) +{ + return cpus_addr(cpumask)[0] & APIC_ALL_CPUS; +} + +static unsigned int phys_pkg_id(int index_msb) +{ + return hard_smp_processor_id() >> index_msb; +} + +struct genapic apic_flat = { + .name = "flat", + .int_delivery_mode = dest_LowestPrio, + .int_dest_mode = (APIC_DEST_LOGICAL != 0), + .target_cpus = flat_target_cpus, + .vector_allocation_domain = flat_vector_allocation_domain, + .apic_id_registered = flat_apic_id_registered, + .init_apic_ldr = flat_init_apic_ldr, + .send_IPI_all = flat_send_IPI_all, + .send_IPI_allbutself = flat_send_IPI_allbutself, + .send_IPI_mask = flat_send_IPI_mask, + .cpu_mask_to_apicid = flat_cpu_mask_to_apicid, + .phys_pkg_id = phys_pkg_id, +}; + +/* + * Physflat mode is used when there are more than 8 CPUs on a AMD system. + * We cannot use logical delivery in this case because the mask + * overflows, so use physical mode. + */ + +static cpumask_t physflat_target_cpus(void) +{ + return cpu_online_map; +} + +static cpumask_t physflat_vector_allocation_domain(int cpu) +{ + cpumask_t domain = CPU_MASK_NONE; + cpu_set(cpu, domain); + return domain; +} + + +static void physflat_send_IPI_mask(cpumask_t cpumask, int vector) +{ + send_IPI_mask_sequence(cpumask, vector); +} + +static void physflat_send_IPI_allbutself(int vector) +{ + cpumask_t allbutme = cpu_online_map; + + cpu_clear(smp_processor_id(), allbutme); + physflat_send_IPI_mask(allbutme, vector); +} + +static void physflat_send_IPI_all(int vector) +{ + physflat_send_IPI_mask(cpu_online_map, vector); +} + +static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask) +{ + int cpu; + + /* + * We're using fixed IRQ delivery, can only return one phys APIC ID. + * May as well be the first. + */ + cpu = first_cpu(cpumask); + if ((unsigned)cpu < NR_CPUS) + return x86_cpu_to_apicid[cpu]; + else + return BAD_APICID; +} + +struct genapic apic_physflat = { + .name = "physical flat", + .int_delivery_mode = dest_Fixed, + .int_dest_mode = (APIC_DEST_PHYSICAL != 0), + .target_cpus = physflat_target_cpus, + .vector_allocation_domain = physflat_vector_allocation_domain, + .apic_id_registered = flat_apic_id_registered, + .init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/ + .send_IPI_all = physflat_send_IPI_all, + .send_IPI_allbutself = physflat_send_IPI_allbutself, + .send_IPI_mask = physflat_send_IPI_mask, + .cpu_mask_to_apicid = physflat_cpu_mask_to_apicid, + .phys_pkg_id = phys_pkg_id, +}; diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c new file mode 100644 index 000000000000..41e8aec4c61d --- /dev/null +++ b/arch/x86/kernel/geode_32.c @@ -0,0 +1,155 @@ +/* + * AMD Geode southbridge support code + * Copyright (C) 2006, Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <asm/msr.h> +#include <asm/geode.h> + +static struct { + char *name; + u32 msr; + int size; + u32 base; +} lbars[] = { + { "geode-pms", MSR_LBAR_PMS, LBAR_PMS_SIZE, 0 }, + { "geode-acpi", MSR_LBAR_ACPI, LBAR_ACPI_SIZE, 0 }, + { "geode-gpio", MSR_LBAR_GPIO, LBAR_GPIO_SIZE, 0 }, + { "geode-mfgpt", MSR_LBAR_MFGPT, LBAR_MFGPT_SIZE, 0 } +}; + +static void __init init_lbars(void) +{ + u32 lo, hi; + int i; + + for (i = 0; i < ARRAY_SIZE(lbars); i++) { + rdmsr(lbars[i].msr, lo, hi); + if (hi & 0x01) + lbars[i].base = lo & 0x0000ffff; + + if (lbars[i].base == 0) + printk(KERN_ERR "geode: Couldn't initialize '%s'\n", + lbars[i].name); + } +} + +int geode_get_dev_base(unsigned int dev) +{ + BUG_ON(dev >= ARRAY_SIZE(lbars)); + return lbars[dev].base; +} +EXPORT_SYMBOL_GPL(geode_get_dev_base); + +/* === GPIO API === */ + +void geode_gpio_set(unsigned int gpio, unsigned int reg) +{ + u32 base = geode_get_dev_base(GEODE_DEV_GPIO); + + if (!base) + return; + + if (gpio < 16) + outl(1 << gpio, base + reg); + else + outl(1 << (gpio - 16), base + 0x80 + reg); +} +EXPORT_SYMBOL_GPL(geode_gpio_set); + +void geode_gpio_clear(unsigned int gpio, unsigned int reg) +{ + u32 base = geode_get_dev_base(GEODE_DEV_GPIO); + + if (!base) + return; + + if (gpio < 16) + outl(1 << (gpio + 16), base + reg); + else + outl(1 << gpio, base + 0x80 + reg); +} +EXPORT_SYMBOL_GPL(geode_gpio_clear); + +int geode_gpio_isset(unsigned int gpio, unsigned int reg) +{ + u32 base = geode_get_dev_base(GEODE_DEV_GPIO); + + if (!base) + return 0; + + if (gpio < 16) + return (inl(base + reg) & (1 << gpio)) ? 1 : 0; + else + return (inl(base + 0x80 + reg) & (1 << (gpio - 16))) ? 1 : 0; +} +EXPORT_SYMBOL_GPL(geode_gpio_isset); + +void geode_gpio_set_irq(unsigned int group, unsigned int irq) +{ + u32 lo, hi; + + if (group > 7 || irq > 15) + return; + + rdmsr(MSR_PIC_ZSEL_HIGH, lo, hi); + + lo &= ~(0xF << (group * 4)); + lo |= (irq & 0xF) << (group * 4); + + wrmsr(MSR_PIC_ZSEL_HIGH, lo, hi); +} +EXPORT_SYMBOL_GPL(geode_gpio_set_irq); + +void geode_gpio_setup_event(unsigned int gpio, int pair, int pme) +{ + u32 base = geode_get_dev_base(GEODE_DEV_GPIO); + u32 offset, shift, val; + + if (gpio >= 24) + offset = GPIO_MAP_W; + else if (gpio >= 16) + offset = GPIO_MAP_Z; + else if (gpio >= 8) + offset = GPIO_MAP_Y; + else + offset = GPIO_MAP_X; + + shift = (gpio % 8) * 4; + + val = inl(base + offset); + + /* Clear whatever was there before */ + val &= ~(0xF << shift); + + /* And set the new value */ + + val |= ((pair & 7) << shift); + + /* Set the PME bit if this is a PME event */ + + if (pme) + val |= (1 << (shift + 3)); + + outl(val, base + offset); +} +EXPORT_SYMBOL_GPL(geode_gpio_setup_event); + +static int __init geode_southbridge_init(void) +{ + if (!is_geode()) + return -ENODEV; + + init_lbars(); + return 0; +} + +postcore_initcall(geode_southbridge_init); diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c new file mode 100644 index 000000000000..6c34bdd22e26 --- /dev/null +++ b/arch/x86/kernel/head64.c @@ -0,0 +1,86 @@ +/* + * linux/arch/x86_64/kernel/head64.c -- prepare to run common code + * + * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE + */ + +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/percpu.h> + +#include <asm/processor.h> +#include <asm/proto.h> +#include <asm/smp.h> +#include <asm/bootsetup.h> +#include <asm/setup.h> +#include <asm/desc.h> +#include <asm/pgtable.h> +#include <asm/tlbflush.h> +#include <asm/sections.h> + +static void __init zap_identity_mappings(void) +{ + pgd_t *pgd = pgd_offset_k(0UL); + pgd_clear(pgd); + __flush_tlb(); +} + +/* Don't add a printk in there. printk relies on the PDA which is not initialized + yet. */ +static void __init clear_bss(void) +{ + memset(__bss_start, 0, + (unsigned long) __bss_stop - (unsigned long) __bss_start); +} + +#define NEW_CL_POINTER 0x228 /* Relative to real mode data */ +#define OLD_CL_MAGIC_ADDR 0x20 +#define OLD_CL_MAGIC 0xA33F +#define OLD_CL_OFFSET 0x22 + +static void __init copy_bootdata(char *real_mode_data) +{ + unsigned long new_data; + char * command_line; + + memcpy(x86_boot_params, real_mode_data, BOOT_PARAM_SIZE); + new_data = *(u32 *) (x86_boot_params + NEW_CL_POINTER); + if (!new_data) { + if (OLD_CL_MAGIC != *(u16 *)(real_mode_data + OLD_CL_MAGIC_ADDR)) { + return; + } + new_data = __pa(real_mode_data) + *(u16 *)(real_mode_data + OLD_CL_OFFSET); + } + command_line = __va(new_data); + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); +} + +void __init x86_64_start_kernel(char * real_mode_data) +{ + int i; + + /* clear bss before set_intr_gate with early_idt_handler */ + clear_bss(); + + /* Make NULL pointers segfault */ + zap_identity_mappings(); + + for (i = 0; i < IDT_ENTRIES; i++) + set_intr_gate(i, early_idt_handler); + asm volatile("lidt %0" :: "m" (idt_descr)); + + early_printk("Kernel alive\n"); + + for (i = 0; i < NR_CPUS; i++) + cpu_pda(i) = &boot_cpu_pda[i]; + + pda_init(0); + copy_bootdata(__va(real_mode_data)); +#ifdef CONFIG_SMP + cpu_set(0, cpu_online_map); +#endif + start_kernel(); +} diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S new file mode 100644 index 000000000000..9150ca9b5f80 --- /dev/null +++ b/arch/x86/kernel/head_32.S @@ -0,0 +1,578 @@ +/* + * linux/arch/i386/kernel/head.S -- the 32-bit startup code. + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Enhanced CPU detection and feature setting code by Mike Jagdis + * and Martin Mares, November 1997. + */ + +.text +#include <linux/threads.h> +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/desc.h> +#include <asm/cache.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> +#include <asm/setup.h> + +/* + * References to members of the new_cpu_data structure. + */ + +#define X86 new_cpu_data+CPUINFO_x86 +#define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor +#define X86_MODEL new_cpu_data+CPUINFO_x86_model +#define X86_MASK new_cpu_data+CPUINFO_x86_mask +#define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math +#define X86_CPUID new_cpu_data+CPUINFO_cpuid_level +#define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability +#define X86_VENDOR_ID new_cpu_data+CPUINFO_x86_vendor_id + +/* + * This is how much memory *in addition to the memory covered up to + * and including _end* we need mapped initially. + * We need: + * - one bit for each possible page, but only in low memory, which means + * 2^32/4096/8 = 128K worst case (4G/4G split.) + * - enough space to map all low memory, which means + * (2^32/4096) / 1024 pages (worst case, non PAE) + * (2^32/4096) / 512 + 4 pages (worst case for PAE) + * - a few pages for allocator use before the kernel pagetable has + * been set up + * + * Modulo rounding, each megabyte assigned here requires a kilobyte of + * memory, which is currently unreclaimed. + * + * This should be a multiple of a page. + */ +LOW_PAGES = 1<<(32-PAGE_SHIFT_asm) + +#if PTRS_PER_PMD > 1 +PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PMD) + PTRS_PER_PGD +#else +PAGE_TABLE_SIZE = (LOW_PAGES / PTRS_PER_PGD) +#endif +BOOTBITMAP_SIZE = LOW_PAGES / 8 +ALLOCATOR_SLOP = 4 + +INIT_MAP_BEYOND_END = BOOTBITMAP_SIZE + (PAGE_TABLE_SIZE + ALLOCATOR_SLOP)*PAGE_SIZE_asm + +/* + * 32-bit kernel entrypoint; only used by the boot CPU. On entry, + * %esi points to the real-mode code as a 32-bit pointer. + * CS and DS must be 4 GB flat segments, but we don't depend on + * any particular GDT layout, because we load our own as soon as we + * can. + */ +.section .text.head,"ax",@progbits +ENTRY(startup_32) + +/* + * Set segments to known values. + */ + cld + lgdt boot_gdt_descr - __PAGE_OFFSET + movl $(__BOOT_DS),%eax + movl %eax,%ds + movl %eax,%es + movl %eax,%fs + movl %eax,%gs + +/* + * Clear BSS first so that there are no surprises... + * No need to cld as DF is already clear from cld above... + */ + xorl %eax,%eax + movl $__bss_start - __PAGE_OFFSET,%edi + movl $__bss_stop - __PAGE_OFFSET,%ecx + subl %edi,%ecx + shrl $2,%ecx + rep ; stosl +/* + * Copy bootup parameters out of the way. + * Note: %esi still has the pointer to the real-mode data. + * With the kexec as boot loader, parameter segment might be loaded beyond + * kernel image and might not even be addressable by early boot page tables. + * (kexec on panic case). Hence copy out the parameters before initializing + * page tables. + */ + movl $(boot_params - __PAGE_OFFSET),%edi + movl $(PARAM_SIZE/4),%ecx + cld + rep + movsl + movl boot_params - __PAGE_OFFSET + NEW_CL_POINTER,%esi + andl %esi,%esi + jnz 2f # New command line protocol + cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR + jne 1f + movzwl OLD_CL_OFFSET,%esi + addl $(OLD_CL_BASE_ADDR),%esi +2: + movl $(boot_command_line - __PAGE_OFFSET),%edi + movl $(COMMAND_LINE_SIZE/4),%ecx + rep + movsl +1: + +/* + * Initialize page tables. This creates a PDE and a set of page + * tables, which are located immediately beyond _end. The variable + * init_pg_tables_end is set up to point to the first "safe" location. + * Mappings are created both at virtual address 0 (identity mapping) + * and PAGE_OFFSET for up to _end+sizeof(page tables)+INIT_MAP_BEYOND_END. + * + * Warning: don't use %esi or the stack in this code. However, %esp + * can be used as a GPR if you really need it... + */ +page_pde_offset = (__PAGE_OFFSET >> 20); + + movl $(pg0 - __PAGE_OFFSET), %edi + movl $(swapper_pg_dir - __PAGE_OFFSET), %edx + movl $0x007, %eax /* 0x007 = PRESENT+RW+USER */ +10: + leal 0x007(%edi),%ecx /* Create PDE entry */ + movl %ecx,(%edx) /* Store identity PDE entry */ + movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */ + addl $4,%edx + movl $1024, %ecx +11: + stosl + addl $0x1000,%eax + loop 11b + /* End condition: we must map up to and including INIT_MAP_BEYOND_END */ + /* bytes beyond the end of our own page tables; the +0x007 is the attribute bits */ + leal (INIT_MAP_BEYOND_END+0x007)(%edi),%ebp + cmpl %ebp,%eax + jb 10b + movl %edi,(init_pg_tables_end - __PAGE_OFFSET) + + xorl %ebx,%ebx /* This is the boot CPU (BSP) */ + jmp 3f +/* + * Non-boot CPU entry point; entered from trampoline.S + * We can't lgdt here, because lgdt itself uses a data segment, but + * we know the trampoline has already loaded the boot_gdt for us. + * + * If cpu hotplug is not supported then this code can go in init section + * which will be freed later + */ + +#ifndef CONFIG_HOTPLUG_CPU +.section .init.text,"ax",@progbits +#endif + + /* Do an early initialization of the fixmap area */ + movl $(swapper_pg_dir - __PAGE_OFFSET), %edx + movl $(swapper_pg_pmd - __PAGE_OFFSET), %eax + addl $0x007, %eax /* 0x007 = PRESENT+RW+USER */ + movl %eax, 4092(%edx) + +#ifdef CONFIG_SMP +ENTRY(startup_32_smp) + cld + movl $(__BOOT_DS),%eax + movl %eax,%ds + movl %eax,%es + movl %eax,%fs + movl %eax,%gs + +/* + * New page tables may be in 4Mbyte page mode and may + * be using the global pages. + * + * NOTE! If we are on a 486 we may have no cr4 at all! + * So we do not try to touch it unless we really have + * some bits in it to set. This won't work if the BSP + * implements cr4 but this AP does not -- very unlikely + * but be warned! The same applies to the pse feature + * if not equally supported. --macro + * + * NOTE! We have to correct for the fact that we're + * not yet offset PAGE_OFFSET.. + */ +#define cr4_bits mmu_cr4_features-__PAGE_OFFSET + movl cr4_bits,%edx + andl %edx,%edx + jz 6f + movl %cr4,%eax # Turn on paging options (PSE,PAE,..) + orl %edx,%eax + movl %eax,%cr4 + + btl $5, %eax # check if PAE is enabled + jnc 6f + + /* Check if extended functions are implemented */ + movl $0x80000000, %eax + cpuid + cmpl $0x80000000, %eax + jbe 6f + mov $0x80000001, %eax + cpuid + /* Execute Disable bit supported? */ + btl $20, %edx + jnc 6f + + /* Setup EFER (Extended Feature Enable Register) */ + movl $0xc0000080, %ecx + rdmsr + + btsl $11, %eax + /* Make changes effective */ + wrmsr + +6: + /* This is a secondary processor (AP) */ + xorl %ebx,%ebx + incl %ebx + +#endif /* CONFIG_SMP */ +3: + +/* + * Enable paging + */ + movl $swapper_pg_dir-__PAGE_OFFSET,%eax + movl %eax,%cr3 /* set the page table pointer.. */ + movl %cr0,%eax + orl $0x80000000,%eax + movl %eax,%cr0 /* ..and set paging (PG) bit */ + ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */ +1: + /* Set up the stack pointer */ + lss stack_start,%esp + +/* + * Initialize eflags. Some BIOS's leave bits like NT set. This would + * confuse the debugger if this code is traced. + * XXX - best to initialize before switching to protected mode. + */ + pushl $0 + popfl + +#ifdef CONFIG_SMP + andl %ebx,%ebx + jz 1f /* Initial CPU cleans BSS */ + jmp checkCPUtype +1: +#endif /* CONFIG_SMP */ + +/* + * start system 32-bit setup. We need to re-do some of the things done + * in 16-bit mode for the "real" operations. + */ + call setup_idt + +checkCPUtype: + + movl $-1,X86_CPUID # -1 for no CPUID initially + +/* check if it is 486 or 386. */ +/* + * XXX - this does a lot of unnecessary setup. Alignment checks don't + * apply at our cpl of 0 and the stack ought to be aligned already, and + * we don't need to preserve eflags. + */ + + movb $3,X86 # at least 386 + pushfl # push EFLAGS + popl %eax # get EFLAGS + movl %eax,%ecx # save original EFLAGS + xorl $0x240000,%eax # flip AC and ID bits in EFLAGS + pushl %eax # copy to EFLAGS + popfl # set EFLAGS + pushfl # get new EFLAGS + popl %eax # put it in eax + xorl %ecx,%eax # change in flags + pushl %ecx # restore original EFLAGS + popfl + testl $0x40000,%eax # check if AC bit changed + je is386 + + movb $4,X86 # at least 486 + testl $0x200000,%eax # check if ID bit changed + je is486 + + /* get vendor info */ + xorl %eax,%eax # call CPUID with 0 -> return vendor ID + cpuid + movl %eax,X86_CPUID # save CPUID level + movl %ebx,X86_VENDOR_ID # lo 4 chars + movl %edx,X86_VENDOR_ID+4 # next 4 chars + movl %ecx,X86_VENDOR_ID+8 # last 4 chars + + orl %eax,%eax # do we have processor info as well? + je is486 + + movl $1,%eax # Use the CPUID instruction to get CPU type + cpuid + movb %al,%cl # save reg for future use + andb $0x0f,%ah # mask processor family + movb %ah,X86 + andb $0xf0,%al # mask model + shrb $4,%al + movb %al,X86_MODEL + andb $0x0f,%cl # mask mask revision + movb %cl,X86_MASK + movl %edx,X86_CAPABILITY + +is486: movl $0x50022,%ecx # set AM, WP, NE and MP + jmp 2f + +is386: movl $2,%ecx # set MP +2: movl %cr0,%eax + andl $0x80000011,%eax # Save PG,PE,ET + orl %ecx,%eax + movl %eax,%cr0 + + call check_x87 + lgdt early_gdt_descr + lidt idt_descr + ljmp $(__KERNEL_CS),$1f +1: movl $(__KERNEL_DS),%eax # reload all the segment registers + movl %eax,%ss # after changing gdt. + movl %eax,%fs # gets reset once there's real percpu + + movl $(__USER_DS),%eax # DS/ES contains default USER segment + movl %eax,%ds + movl %eax,%es + + xorl %eax,%eax # Clear GS and LDT + movl %eax,%gs + lldt %ax + + cld # gcc2 wants the direction flag cleared at all times + pushl $0 # fake return address for unwinder +#ifdef CONFIG_SMP + movb ready, %cl + movb $1, ready + cmpb $0,%cl # the first CPU calls start_kernel + je 1f + movl $(__KERNEL_PERCPU), %eax + movl %eax,%fs # set this cpu's percpu + jmp initialize_secondary # all other CPUs call initialize_secondary +1: +#endif /* CONFIG_SMP */ + jmp start_kernel + +/* + * We depend on ET to be correct. This checks for 287/387. + */ +check_x87: + movb $0,X86_HARD_MATH + clts + fninit + fstsw %ax + cmpb $0,%al + je 1f + movl %cr0,%eax /* no coprocessor: have to set bits */ + xorl $4,%eax /* set EM */ + movl %eax,%cr0 + ret + ALIGN +1: movb $1,X86_HARD_MATH + .byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */ + ret + +/* + * setup_idt + * + * sets up a idt with 256 entries pointing to + * ignore_int, interrupt gates. It doesn't actually load + * idt - that can be done only after paging has been enabled + * and the kernel moved to PAGE_OFFSET. Interrupts + * are enabled elsewhere, when we can be relatively + * sure everything is ok. + * + * Warning: %esi is live across this function. + */ +setup_idt: + lea ignore_int,%edx + movl $(__KERNEL_CS << 16),%eax + movw %dx,%ax /* selector = 0x0010 = cs */ + movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ + + lea idt_table,%edi + mov $256,%ecx +rp_sidt: + movl %eax,(%edi) + movl %edx,4(%edi) + addl $8,%edi + dec %ecx + jne rp_sidt + +.macro set_early_handler handler,trapno + lea \handler,%edx + movl $(__KERNEL_CS << 16),%eax + movw %dx,%ax + movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ + lea idt_table,%edi + movl %eax,8*\trapno(%edi) + movl %edx,8*\trapno+4(%edi) +.endm + + set_early_handler handler=early_divide_err,trapno=0 + set_early_handler handler=early_illegal_opcode,trapno=6 + set_early_handler handler=early_protection_fault,trapno=13 + set_early_handler handler=early_page_fault,trapno=14 + + ret + +early_divide_err: + xor %edx,%edx + pushl $0 /* fake errcode */ + jmp early_fault + +early_illegal_opcode: + movl $6,%edx + pushl $0 /* fake errcode */ + jmp early_fault + +early_protection_fault: + movl $13,%edx + jmp early_fault + +early_page_fault: + movl $14,%edx + jmp early_fault + +early_fault: + cld +#ifdef CONFIG_PRINTK + movl $(__KERNEL_DS),%eax + movl %eax,%ds + movl %eax,%es + cmpl $2,early_recursion_flag + je hlt_loop + incl early_recursion_flag + movl %cr2,%eax + pushl %eax + pushl %edx /* trapno */ + pushl $fault_msg +#ifdef CONFIG_EARLY_PRINTK + call early_printk +#else + call printk +#endif +#endif +hlt_loop: + hlt + jmp hlt_loop + +/* This is the default interrupt "handler" :-) */ + ALIGN +ignore_int: + cld +#ifdef CONFIG_PRINTK + pushl %eax + pushl %ecx + pushl %edx + pushl %es + pushl %ds + movl $(__KERNEL_DS),%eax + movl %eax,%ds + movl %eax,%es + cmpl $2,early_recursion_flag + je hlt_loop + incl early_recursion_flag + pushl 16(%esp) + pushl 24(%esp) + pushl 32(%esp) + pushl 40(%esp) + pushl $int_msg +#ifdef CONFIG_EARLY_PRINTK + call early_printk +#else + call printk +#endif + addl $(5*4),%esp + popl %ds + popl %es + popl %edx + popl %ecx + popl %eax +#endif + iret + +.section .text +/* + * Real beginning of normal "text" segment + */ +ENTRY(stext) +ENTRY(_stext) + +/* + * BSS section + */ +.section ".bss.page_aligned","wa" + .align PAGE_SIZE_asm +ENTRY(swapper_pg_dir) + .fill 1024,4,0 +ENTRY(swapper_pg_pmd) + .fill 1024,4,0 +ENTRY(empty_zero_page) + .fill 4096,1,0 + +/* + * This starts the data section. + */ +.data +ENTRY(stack_start) + .long init_thread_union+THREAD_SIZE + .long __BOOT_DS + +ready: .byte 0 + +early_recursion_flag: + .long 0 + +int_msg: + .asciz "Unknown interrupt or fault at EIP %p %p %p\n" + +fault_msg: + .ascii "Int %d: CR2 %p err %p EIP %p CS %p flags %p\n" + .asciz "Stack: %p %p %p %p %p %p %p %p\n" + +#include "../../x86/xen/xen-head.S" + +/* + * The IDT and GDT 'descriptors' are a strange 48-bit object + * only used by the lidt and lgdt instructions. They are not + * like usual segment descriptors - they consist of a 16-bit + * segment size, and 32-bit linear address value: + */ + +.globl boot_gdt_descr +.globl idt_descr + + ALIGN +# early boot GDT descriptor (must use 1:1 address mapping) + .word 0 # 32 bit align gdt_desc.address +boot_gdt_descr: + .word __BOOT_DS+7 + .long boot_gdt - __PAGE_OFFSET + + .word 0 # 32-bit align idt_desc.address +idt_descr: + .word IDT_ENTRIES*8-1 # idt contains 256 entries + .long idt_table + +# boot GDT descriptor (later on used by CPU#0): + .word 0 # 32 bit align gdt_desc.address +ENTRY(early_gdt_descr) + .word GDT_ENTRIES*8-1 + .long per_cpu__gdt_page /* Overwritten for secondary CPUs */ + +/* + * The boot_gdt must mirror the equivalent in setup.S and is + * used only for booting. + */ + .align L1_CACHE_BYTES +ENTRY(boot_gdt) + .fill GDT_ENTRY_BOOT_CS,8,0 + .quad 0x00cf9a000000ffff /* kernel 4GB code at 0x00000000 */ + .quad 0x00cf92000000ffff /* kernel 4GB data at 0x00000000 */ diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S new file mode 100644 index 000000000000..b6167fe3330e --- /dev/null +++ b/arch/x86/kernel/head_64.S @@ -0,0 +1,416 @@ +/* + * linux/arch/x86_64/kernel/head.S -- start in 32bit and switch to 64bit + * + * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE + * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2000 Karsten Keil <kkeil@suse.de> + * Copyright (C) 2001,2002 Andi Kleen <ak@suse.de> + * Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com> + */ + + +#include <linux/linkage.h> +#include <linux/threads.h> +#include <linux/init.h> +#include <asm/desc.h> +#include <asm/segment.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/msr.h> +#include <asm/cache.h> + +/* we are not able to switch in one step to the final KERNEL ADRESS SPACE + * because we need identity-mapped pages. + * + */ + + .text + .section .text.head + .code64 + .globl startup_64 +startup_64: + + /* + * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1, + * and someone has loaded an identity mapped page table + * for us. These identity mapped page tables map all of the + * kernel pages and possibly all of memory. + * + * %esi holds a physical pointer to real_mode_data. + * + * We come here either directly from a 64bit bootloader, or from + * arch/x86_64/boot/compressed/head.S. + * + * We only come here initially at boot nothing else comes here. + * + * Since we may be loaded at an address different from what we were + * compiled to run at we first fixup the physical addresses in our page + * tables and then reload them. + */ + + /* Compute the delta between the address I am compiled to run at and the + * address I am actually running at. + */ + leaq _text(%rip), %rbp + subq $_text - __START_KERNEL_map, %rbp + + /* Is the address not 2M aligned? */ + movq %rbp, %rax + andl $~LARGE_PAGE_MASK, %eax + testl %eax, %eax + jnz bad_address + + /* Is the address too large? */ + leaq _text(%rip), %rdx + movq $PGDIR_SIZE, %rax + cmpq %rax, %rdx + jae bad_address + + /* Fixup the physical addresses in the page table + */ + addq %rbp, init_level4_pgt + 0(%rip) + addq %rbp, init_level4_pgt + (258*8)(%rip) + addq %rbp, init_level4_pgt + (511*8)(%rip) + + addq %rbp, level3_ident_pgt + 0(%rip) + + addq %rbp, level3_kernel_pgt + (510*8)(%rip) + addq %rbp, level3_kernel_pgt + (511*8)(%rip) + + addq %rbp, level2_fixmap_pgt + (506*8)(%rip) + + /* Add an Identity mapping if I am above 1G */ + leaq _text(%rip), %rdi + andq $LARGE_PAGE_MASK, %rdi + + movq %rdi, %rax + shrq $PUD_SHIFT, %rax + andq $(PTRS_PER_PUD - 1), %rax + jz ident_complete + + leaq (level2_spare_pgt - __START_KERNEL_map + _KERNPG_TABLE)(%rbp), %rdx + leaq level3_ident_pgt(%rip), %rbx + movq %rdx, 0(%rbx, %rax, 8) + + movq %rdi, %rax + shrq $PMD_SHIFT, %rax + andq $(PTRS_PER_PMD - 1), %rax + leaq __PAGE_KERNEL_LARGE_EXEC(%rdi), %rdx + leaq level2_spare_pgt(%rip), %rbx + movq %rdx, 0(%rbx, %rax, 8) +ident_complete: + + /* Fixup the kernel text+data virtual addresses + */ + leaq level2_kernel_pgt(%rip), %rdi + leaq 4096(%rdi), %r8 + /* See if it is a valid page table entry */ +1: testq $1, 0(%rdi) + jz 2f + addq %rbp, 0(%rdi) + /* Go to the next page */ +2: addq $8, %rdi + cmp %r8, %rdi + jne 1b + + /* Fixup phys_base */ + addq %rbp, phys_base(%rip) + +#ifdef CONFIG_SMP + addq %rbp, trampoline_level4_pgt + 0(%rip) + addq %rbp, trampoline_level4_pgt + (511*8)(%rip) +#endif +#ifdef CONFIG_ACPI_SLEEP + addq %rbp, wakeup_level4_pgt + 0(%rip) + addq %rbp, wakeup_level4_pgt + (511*8)(%rip) +#endif + + /* Due to ENTRY(), sometimes the empty space gets filled with + * zeros. Better take a jmp than relying on empty space being + * filled with 0x90 (nop) + */ + jmp secondary_startup_64 +ENTRY(secondary_startup_64) + /* + * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1, + * and someone has loaded a mapped page table. + * + * %esi holds a physical pointer to real_mode_data. + * + * We come here either from startup_64 (using physical addresses) + * or from trampoline.S (using virtual addresses). + * + * Using virtual addresses from trampoline.S removes the need + * to have any identity mapped pages in the kernel page table + * after the boot processor executes this code. + */ + + /* Enable PAE mode and PGE */ + xorq %rax, %rax + btsq $5, %rax + btsq $7, %rax + movq %rax, %cr4 + + /* Setup early boot stage 4 level pagetables. */ + movq $(init_level4_pgt - __START_KERNEL_map), %rax + addq phys_base(%rip), %rax + movq %rax, %cr3 + + /* Ensure I am executing from virtual addresses */ + movq $1f, %rax + jmp *%rax +1: + + /* Check if nx is implemented */ + movl $0x80000001, %eax + cpuid + movl %edx,%edi + + /* Setup EFER (Extended Feature Enable Register) */ + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_SCE, %eax /* Enable System Call */ + btl $20,%edi /* No Execute supported? */ + jnc 1f + btsl $_EFER_NX, %eax +1: wrmsr /* Make changes effective */ + + /* Setup cr0 */ +#define CR0_PM 1 /* protected mode */ +#define CR0_MP (1<<1) +#define CR0_ET (1<<4) +#define CR0_NE (1<<5) +#define CR0_WP (1<<16) +#define CR0_AM (1<<18) +#define CR0_PAGING (1<<31) + movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax + /* Make changes effective */ + movq %rax, %cr0 + + /* Setup a boot time stack */ + movq init_rsp(%rip),%rsp + + /* zero EFLAGS after setting rsp */ + pushq $0 + popfq + + /* + * We must switch to a new descriptor in kernel space for the GDT + * because soon the kernel won't have access anymore to the userspace + * addresses where we're currently running on. We have to do that here + * because in 32bit we couldn't load a 64bit linear address. + */ + lgdt cpu_gdt_descr(%rip) + + /* set up data segments. actually 0 would do too */ + movl $__KERNEL_DS,%eax + movl %eax,%ds + movl %eax,%ss + movl %eax,%es + + /* + * We don't really need to load %fs or %gs, but load them anyway + * to kill any stale realmode selectors. This allows execution + * under VT hardware. + */ + movl %eax,%fs + movl %eax,%gs + + /* + * Setup up a dummy PDA. this is just for some early bootup code + * that does in_interrupt() + */ + movl $MSR_GS_BASE,%ecx + movq $empty_zero_page,%rax + movq %rax,%rdx + shrq $32,%rdx + wrmsr + + /* esi is pointer to real mode structure with interesting info. + pass it to C */ + movl %esi, %edi + + /* Finally jump to run C code and to be on real kernel address + * Since we are running on identity-mapped space we have to jump + * to the full 64bit address, this is only possible as indirect + * jump. In addition we need to ensure %cs is set so we make this + * a far return. + */ + movq initial_code(%rip),%rax + pushq $0 # fake return address to stop unwinder + pushq $__KERNEL_CS # set correct cs + pushq %rax # target address in negative space + lretq + + /* SMP bootup changes these two */ +#ifndef CONFIG_HOTPLUG_CPU + .pushsection .init.data +#endif + .align 8 + .globl initial_code +initial_code: + .quad x86_64_start_kernel +#ifndef CONFIG_HOTPLUG_CPU + .popsection +#endif + .globl init_rsp +init_rsp: + .quad init_thread_union+THREAD_SIZE-8 + +bad_address: + jmp bad_address + +ENTRY(early_idt_handler) + cmpl $2,early_recursion_flag(%rip) + jz 1f + incl early_recursion_flag(%rip) + xorl %eax,%eax + movq 8(%rsp),%rsi # get rip + movq (%rsp),%rdx + movq %cr2,%rcx + leaq early_idt_msg(%rip),%rdi + call early_printk + cmpl $2,early_recursion_flag(%rip) + jz 1f + call dump_stack +#ifdef CONFIG_KALLSYMS + leaq early_idt_ripmsg(%rip),%rdi + movq 8(%rsp),%rsi # get rip again + call __print_symbol +#endif +1: hlt + jmp 1b +early_recursion_flag: + .long 0 + +early_idt_msg: + .asciz "PANIC: early exception rip %lx error %lx cr2 %lx\n" +early_idt_ripmsg: + .asciz "RIP %s\n" + +.balign PAGE_SIZE + +#define NEXT_PAGE(name) \ + .balign PAGE_SIZE; \ +ENTRY(name) + +/* Automate the creation of 1 to 1 mapping pmd entries */ +#define PMDS(START, PERM, COUNT) \ + i = 0 ; \ + .rept (COUNT) ; \ + .quad (START) + (i << 21) + (PERM) ; \ + i = i + 1 ; \ + .endr + + /* + * This default setting generates an ident mapping at address 0x100000 + * and a mapping for the kernel that precisely maps virtual address + * 0xffffffff80000000 to physical address 0x000000. (always using + * 2Mbyte large pages provided by PAE mode) + */ +NEXT_PAGE(init_level4_pgt) + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 257,8,0 + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 252,8,0 + /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ + .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE + +NEXT_PAGE(level3_ident_pgt) + .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 511,8,0 + +NEXT_PAGE(level3_kernel_pgt) + .fill 510,8,0 + /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ + .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE + .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE + +NEXT_PAGE(level2_fixmap_pgt) + .fill 506,8,0 + .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE + /* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */ + .fill 5,8,0 + +NEXT_PAGE(level1_fixmap_pgt) + .fill 512,8,0 + +NEXT_PAGE(level2_ident_pgt) + /* Since I easily can, map the first 1G. + * Don't set NX because code runs from these pages. + */ + PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD) + +NEXT_PAGE(level2_kernel_pgt) + /* 40MB kernel mapping. The kernel code cannot be bigger than that. + When you change this change KERNEL_TEXT_SIZE in page.h too. */ + /* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */ + PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE) + /* Module mapping starts here */ + .fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0 + +NEXT_PAGE(level2_spare_pgt) + .fill 512,8,0 + +#undef PMDS +#undef NEXT_PAGE + + .data + .align 16 + .globl cpu_gdt_descr +cpu_gdt_descr: + .word gdt_end-cpu_gdt_table-1 +gdt: + .quad cpu_gdt_table +#ifdef CONFIG_SMP + .rept NR_CPUS-1 + .word 0 + .quad 0 + .endr +#endif + +ENTRY(phys_base) + /* This must match the first entry in level2_kernel_pgt */ + .quad 0x0000000000000000 + +/* We need valid kernel segments for data and code in long mode too + * IRET will check the segment types kkeil 2000/10/28 + * Also sysret mandates a special GDT layout + */ + + .section .data.page_aligned, "aw" + .align PAGE_SIZE + +/* The TLS descriptors are currently at a different place compared to i386. + Hopefully nobody expects them at a fixed place (Wine?) */ + +ENTRY(cpu_gdt_table) + .quad 0x0000000000000000 /* NULL descriptor */ + .quad 0x00cf9b000000ffff /* __KERNEL32_CS */ + .quad 0x00af9b000000ffff /* __KERNEL_CS */ + .quad 0x00cf93000000ffff /* __KERNEL_DS */ + .quad 0x00cffb000000ffff /* __USER32_CS */ + .quad 0x00cff3000000ffff /* __USER_DS, __USER32_DS */ + .quad 0x00affb000000ffff /* __USER_CS */ + .quad 0x0 /* unused */ + .quad 0,0 /* TSS */ + .quad 0,0 /* LDT */ + .quad 0,0,0 /* three TLS descriptors */ + .quad 0x0000f40000000000 /* node/CPU stored in limit */ +gdt_end: + /* asm/segment.h:GDT_ENTRIES must match this */ + /* This should be a multiple of the cache line size */ + /* GDTs of other CPUs are now dynamically allocated */ + + /* zero the remaining page */ + .fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0 + + .section .bss, "aw", @nobits + .align L1_CACHE_BYTES +ENTRY(idt_table) + .skip 256 * 16 + + .section .bss.page_aligned, "aw", @nobits + .align PAGE_SIZE +ENTRY(empty_zero_page) + .skip PAGE_SIZE diff --git a/arch/x86/kernel/hpet_32.c b/arch/x86/kernel/hpet_32.c new file mode 100644 index 000000000000..533d4932bc79 --- /dev/null +++ b/arch/x86/kernel/hpet_32.c @@ -0,0 +1,553 @@ +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/errno.h> +#include <linux/hpet.h> +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/pm.h> +#include <linux/delay.h> + +#include <asm/hpet.h> +#include <asm/io.h> + +extern struct clock_event_device *global_clock_event; + +#define HPET_MASK CLOCKSOURCE_MASK(32) +#define HPET_SHIFT 22 + +/* FSEC = 10^-15 NSEC = 10^-9 */ +#define FSEC_PER_NSEC 1000000 + +/* + * HPET address is set in acpi/boot.c, when an ACPI entry exists + */ +unsigned long hpet_address; +static void __iomem * hpet_virt_address; + +static inline unsigned long hpet_readl(unsigned long a) +{ + return readl(hpet_virt_address + a); +} + +static inline void hpet_writel(unsigned long d, unsigned long a) +{ + writel(d, hpet_virt_address + a); +} + +/* + * HPET command line enable / disable + */ +static int boot_hpet_disable; + +static int __init hpet_setup(char* str) +{ + if (str) { + if (!strncmp("disable", str, 7)) + boot_hpet_disable = 1; + } + return 1; +} +__setup("hpet=", hpet_setup); + +static inline int is_hpet_capable(void) +{ + return (!boot_hpet_disable && hpet_address); +} + +/* + * HPET timer interrupt enable / disable + */ +static int hpet_legacy_int_enabled; + +/** + * is_hpet_enabled - check whether the hpet timer interrupt is enabled + */ +int is_hpet_enabled(void) +{ + return is_hpet_capable() && hpet_legacy_int_enabled; +} + +/* + * When the hpet driver (/dev/hpet) is enabled, we need to reserve + * timer 0 and timer 1 in case of RTC emulation. + */ +#ifdef CONFIG_HPET +static void hpet_reserve_platform_timers(unsigned long id) +{ + struct hpet __iomem *hpet = hpet_virt_address; + struct hpet_timer __iomem *timer = &hpet->hpet_timers[2]; + unsigned int nrtimers, i; + struct hpet_data hd; + + nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; + + memset(&hd, 0, sizeof (hd)); + hd.hd_phys_address = hpet_address; + hd.hd_address = hpet_virt_address; + hd.hd_nirqs = nrtimers; + hd.hd_flags = HPET_DATA_PLATFORM; + hpet_reserve_timer(&hd, 0); + +#ifdef CONFIG_HPET_EMULATE_RTC + hpet_reserve_timer(&hd, 1); +#endif + + hd.hd_irq[0] = HPET_LEGACY_8254; + hd.hd_irq[1] = HPET_LEGACY_RTC; + + for (i = 2; i < nrtimers; timer++, i++) + hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >> + Tn_INT_ROUTE_CNF_SHIFT; + + hpet_alloc(&hd); + +} +#else +static void hpet_reserve_platform_timers(unsigned long id) { } +#endif + +/* + * Common hpet info + */ +static unsigned long hpet_period; + +static void hpet_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt); +static int hpet_next_event(unsigned long delta, + struct clock_event_device *evt); + +/* + * The hpet clock event device + */ +static struct clock_event_device hpet_clockevent = { + .name = "hpet", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = hpet_set_mode, + .set_next_event = hpet_next_event, + .shift = 32, + .irq = 0, +}; + +static void hpet_start_counter(void) +{ + unsigned long cfg = hpet_readl(HPET_CFG); + + cfg &= ~HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); + hpet_writel(0, HPET_COUNTER); + hpet_writel(0, HPET_COUNTER + 4); + cfg |= HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); +} + +static void hpet_enable_int(void) +{ + unsigned long cfg = hpet_readl(HPET_CFG); + + cfg |= HPET_CFG_LEGACY; + hpet_writel(cfg, HPET_CFG); + hpet_legacy_int_enabled = 1; +} + +static void hpet_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long cfg, cmp, now; + uint64_t delta; + + switch(mode) { + case CLOCK_EVT_MODE_PERIODIC: + delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * hpet_clockevent.mult; + delta >>= hpet_clockevent.shift; + now = hpet_readl(HPET_COUNTER); + cmp = now + (unsigned long) delta; + cfg = hpet_readl(HPET_T0_CFG); + cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | + HPET_TN_SETVAL | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T0_CFG); + /* + * The first write after writing TN_SETVAL to the + * config register sets the counter value, the second + * write sets the period. + */ + hpet_writel(cmp, HPET_T0_CMP); + udelay(1); + hpet_writel((unsigned long) delta, HPET_T0_CMP); + break; + + case CLOCK_EVT_MODE_ONESHOT: + cfg = hpet_readl(HPET_T0_CFG); + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T0_CFG); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + cfg = hpet_readl(HPET_T0_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T0_CFG); + break; + + case CLOCK_EVT_MODE_RESUME: + hpet_enable_int(); + break; + } +} + +static int hpet_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long cnt; + + cnt = hpet_readl(HPET_COUNTER); + cnt += delta; + hpet_writel(cnt, HPET_T0_CMP); + + return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0; +} + +/* + * Clock source related code + */ +static cycle_t read_hpet(void) +{ + return (cycle_t)hpet_readl(HPET_COUNTER); +} + +static struct clocksource clocksource_hpet = { + .name = "hpet", + .rating = 250, + .read = read_hpet, + .mask = HPET_MASK, + .shift = HPET_SHIFT, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = hpet_start_counter, +}; + +/* + * Try to setup the HPET timer + */ +int __init hpet_enable(void) +{ + unsigned long id; + uint64_t hpet_freq; + u64 tmp, start, now; + cycle_t t1; + + if (!is_hpet_capable()) + return 0; + + hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); + + /* + * Read the period and check for a sane value: + */ + hpet_period = hpet_readl(HPET_PERIOD); + if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) + goto out_nohpet; + + /* + * The period is a femto seconds value. We need to calculate the + * scaled math multiplication factor for nanosecond to hpet tick + * conversion. + */ + hpet_freq = 1000000000000000ULL; + do_div(hpet_freq, hpet_period); + hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, + NSEC_PER_SEC, 32); + /* Calculate the min / max delta */ + hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, + &hpet_clockevent); + hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, + &hpet_clockevent); + + /* + * Read the HPET ID register to retrieve the IRQ routing + * information and the number of channels + */ + id = hpet_readl(HPET_ID); + +#ifdef CONFIG_HPET_EMULATE_RTC + /* + * The legacy routing mode needs at least two channels, tick timer + * and the rtc emulation channel. + */ + if (!(id & HPET_ID_NUMBER)) + goto out_nohpet; +#endif + + /* Start the counter */ + hpet_start_counter(); + + /* Verify whether hpet counter works */ + t1 = read_hpet(); + rdtscll(start); + + /* + * We don't know the TSC frequency yet, but waiting for + * 200000 TSC cycles is safe: + * 4 GHz == 50us + * 1 GHz == 200us + */ + do { + rep_nop(); + rdtscll(now); + } while ((now - start) < 200000UL); + + if (t1 == read_hpet()) { + printk(KERN_WARNING + "HPET counter not counting. HPET disabled\n"); + goto out_nohpet; + } + + /* Initialize and register HPET clocksource + * + * hpet period is in femto seconds per cycle + * so we need to convert this to ns/cyc units + * aproximated by mult/2^shift + * + * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift + * fsec/cyc * 1ns/1000000fsec * 2^shift = mult + * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult + * (fsec/cyc << shift)/1000000 = mult + * (hpet_period << shift)/FSEC_PER_NSEC = mult + */ + tmp = (u64)hpet_period << HPET_SHIFT; + do_div(tmp, FSEC_PER_NSEC); + clocksource_hpet.mult = (u32)tmp; + + clocksource_register(&clocksource_hpet); + + if (id & HPET_ID_LEGSUP) { + hpet_enable_int(); + hpet_reserve_platform_timers(id); + /* + * Start hpet with the boot cpu mask and make it + * global after the IO_APIC has been initialized. + */ + hpet_clockevent.cpumask = cpumask_of_cpu(smp_processor_id()); + clockevents_register_device(&hpet_clockevent); + global_clock_event = &hpet_clockevent; + return 1; + } + return 0; + +out_nohpet: + iounmap(hpet_virt_address); + hpet_virt_address = NULL; + boot_hpet_disable = 1; + return 0; +} + + +#ifdef CONFIG_HPET_EMULATE_RTC + +/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET + * is enabled, we support RTC interrupt functionality in software. + * RTC has 3 kinds of interrupts: + * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock + * is updated + * 2) Alarm Interrupt - generate an interrupt at a specific time of day + * 3) Periodic Interrupt - generate periodic interrupt, with frequencies + * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) + * (1) and (2) above are implemented using polling at a frequency of + * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt + * overhead. (DEFAULT_RTC_INT_FREQ) + * For (3), we use interrupts at 64Hz or user specified periodic + * frequency, whichever is higher. + */ +#include <linux/mc146818rtc.h> +#include <linux/rtc.h> + +#define DEFAULT_RTC_INT_FREQ 64 +#define DEFAULT_RTC_SHIFT 6 +#define RTC_NUM_INTS 1 + +static unsigned long hpet_rtc_flags; +static unsigned long hpet_prev_update_sec; +static struct rtc_time hpet_alarm_time; +static unsigned long hpet_pie_count; +static unsigned long hpet_t1_cmp; +static unsigned long hpet_default_delta; +static unsigned long hpet_pie_delta; +static unsigned long hpet_pie_limit; + +/* + * Timer 1 for RTC emulation. We use one shot mode, as periodic mode + * is not supported by all HPET implementations for timer 1. + * + * hpet_rtc_timer_init() is called when the rtc is initialized. + */ +int hpet_rtc_timer_init(void) +{ + unsigned long cfg, cnt, delta, flags; + + if (!is_hpet_enabled()) + return 0; + + if (!hpet_default_delta) { + uint64_t clc; + + clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; + clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT; + hpet_default_delta = (unsigned long) clc; + } + + if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) + delta = hpet_default_delta; + else + delta = hpet_pie_delta; + + local_irq_save(flags); + + cnt = delta + hpet_readl(HPET_COUNTER); + hpet_writel(cnt, HPET_T1_CMP); + hpet_t1_cmp = cnt; + + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T1_CFG); + + local_irq_restore(flags); + + return 1; +} + +/* + * The functions below are called from rtc driver. + * Return 0 if HPET is not being used. + * Otherwise do the necessary changes and return 1. + */ +int hpet_mask_rtc_irq_bit(unsigned long bit_mask) +{ + if (!is_hpet_enabled()) + return 0; + + hpet_rtc_flags &= ~bit_mask; + return 1; +} + +int hpet_set_rtc_irq_bit(unsigned long bit_mask) +{ + unsigned long oldbits = hpet_rtc_flags; + + if (!is_hpet_enabled()) + return 0; + + hpet_rtc_flags |= bit_mask; + + if (!oldbits) + hpet_rtc_timer_init(); + + return 1; +} + +int hpet_set_alarm_time(unsigned char hrs, unsigned char min, + unsigned char sec) +{ + if (!is_hpet_enabled()) + return 0; + + hpet_alarm_time.tm_hour = hrs; + hpet_alarm_time.tm_min = min; + hpet_alarm_time.tm_sec = sec; + + return 1; +} + +int hpet_set_periodic_freq(unsigned long freq) +{ + uint64_t clc; + + if (!is_hpet_enabled()) + return 0; + + if (freq <= DEFAULT_RTC_INT_FREQ) + hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq; + else { + clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; + do_div(clc, freq); + clc >>= hpet_clockevent.shift; + hpet_pie_delta = (unsigned long) clc; + } + return 1; +} + +int hpet_rtc_dropped_irq(void) +{ + return is_hpet_enabled(); +} + +static void hpet_rtc_timer_reinit(void) +{ + unsigned long cfg, delta; + int lost_ints = -1; + + if (unlikely(!hpet_rtc_flags)) { + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); + return; + } + + if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) + delta = hpet_default_delta; + else + delta = hpet_pie_delta; + + /* + * Increment the comparator value until we are ahead of the + * current count. + */ + do { + hpet_t1_cmp += delta; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + lost_ints++; + } while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0); + + if (lost_ints) { + if (hpet_rtc_flags & RTC_PIE) + hpet_pie_count += lost_ints; + if (printk_ratelimit()) + printk(KERN_WARNING "rtc: lost %d interrupts\n", + lost_ints); + } +} + +irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) +{ + struct rtc_time curr_time; + unsigned long rtc_int_flag = 0; + + hpet_rtc_timer_reinit(); + + if (hpet_rtc_flags & (RTC_UIE | RTC_AIE)) + rtc_get_rtc_time(&curr_time); + + if (hpet_rtc_flags & RTC_UIE && + curr_time.tm_sec != hpet_prev_update_sec) { + rtc_int_flag = RTC_UF; + hpet_prev_update_sec = curr_time.tm_sec; + } + + if (hpet_rtc_flags & RTC_PIE && + ++hpet_pie_count >= hpet_pie_limit) { + rtc_int_flag |= RTC_PF; + hpet_pie_count = 0; + } + + if (hpet_rtc_flags & RTC_PIE && + (curr_time.tm_sec == hpet_alarm_time.tm_sec) && + (curr_time.tm_min == hpet_alarm_time.tm_min) && + (curr_time.tm_hour == hpet_alarm_time.tm_hour)) + rtc_int_flag |= RTC_AF; + + if (rtc_int_flag) { + rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); + rtc_interrupt(rtc_int_flag, dev_id); + } + return IRQ_HANDLED; +} +#endif diff --git a/arch/x86/kernel/hpet_64.c b/arch/x86/kernel/hpet_64.c new file mode 100644 index 000000000000..e2d1b912e154 --- /dev/null +++ b/arch/x86/kernel/hpet_64.c @@ -0,0 +1,493 @@ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/mc146818rtc.h> +#include <linux/time.h> +#include <linux/clocksource.h> +#include <linux/ioport.h> +#include <linux/acpi.h> +#include <linux/hpet.h> +#include <asm/pgtable.h> +#include <asm/vsyscall.h> +#include <asm/timex.h> +#include <asm/hpet.h> + +#define HPET_MASK 0xFFFFFFFF +#define HPET_SHIFT 22 + +/* FSEC = 10^-15 NSEC = 10^-9 */ +#define FSEC_PER_NSEC 1000000 + +int nohpet __initdata; + +unsigned long hpet_address; +unsigned long hpet_period; /* fsecs / HPET clock */ +unsigned long hpet_tick; /* HPET clocks / interrupt */ + +int hpet_use_timer; /* Use counter of hpet for time keeping, + * otherwise PIT + */ + +#ifdef CONFIG_HPET +static __init int late_hpet_init(void) +{ + struct hpet_data hd; + unsigned int ntimer; + + if (!hpet_address) + return 0; + + memset(&hd, 0, sizeof(hd)); + + ntimer = hpet_readl(HPET_ID); + ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; + ntimer++; + + /* + * Register with driver. + * Timer0 and Timer1 is used by platform. + */ + hd.hd_phys_address = hpet_address; + hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); + hd.hd_nirqs = ntimer; + hd.hd_flags = HPET_DATA_PLATFORM; + hpet_reserve_timer(&hd, 0); +#ifdef CONFIG_HPET_EMULATE_RTC + hpet_reserve_timer(&hd, 1); +#endif + hd.hd_irq[0] = HPET_LEGACY_8254; + hd.hd_irq[1] = HPET_LEGACY_RTC; + if (ntimer > 2) { + struct hpet *hpet; + struct hpet_timer *timer; + int i; + + hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE); + timer = &hpet->hpet_timers[2]; + for (i = 2; i < ntimer; timer++, i++) + hd.hd_irq[i] = (timer->hpet_config & + Tn_INT_ROUTE_CNF_MASK) >> + Tn_INT_ROUTE_CNF_SHIFT; + + } + + hpet_alloc(&hd); + return 0; +} +fs_initcall(late_hpet_init); +#endif + +int hpet_timer_stop_set_go(unsigned long tick) +{ + unsigned int cfg; + +/* + * Stop the timers and reset the main counter. + */ + + cfg = hpet_readl(HPET_CFG); + cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY); + hpet_writel(cfg, HPET_CFG); + hpet_writel(0, HPET_COUNTER); + hpet_writel(0, HPET_COUNTER + 4); + +/* + * Set up timer 0, as periodic with first interrupt to happen at hpet_tick, + * and period also hpet_tick. + */ + if (hpet_use_timer) { + hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | + HPET_TN_32BIT, HPET_T0_CFG); + hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */ + hpet_writel(hpet_tick, HPET_T0_CMP); /* period */ + cfg |= HPET_CFG_LEGACY; + } +/* + * Go! + */ + + cfg |= HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); + + return 0; +} + +static cycle_t read_hpet(void) +{ + return (cycle_t)hpet_readl(HPET_COUNTER); +} + +static cycle_t __vsyscall_fn vread_hpet(void) +{ + return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0); +} + +struct clocksource clocksource_hpet = { + .name = "hpet", + .rating = 250, + .read = read_hpet, + .mask = (cycle_t)HPET_MASK, + .mult = 0, /* set below */ + .shift = HPET_SHIFT, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .vread = vread_hpet, +}; + +int __init hpet_arch_init(void) +{ + unsigned int id; + u64 tmp; + + if (!hpet_address) + return -1; + set_fixmap_nocache(FIX_HPET_BASE, hpet_address); + __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); + +/* + * Read the period, compute tick and quotient. + */ + + id = hpet_readl(HPET_ID); + + if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER)) + return -1; + + hpet_period = hpet_readl(HPET_PERIOD); + if (hpet_period < 100000 || hpet_period > 100000000) + return -1; + + hpet_tick = (FSEC_PER_TICK + hpet_period / 2) / hpet_period; + + hpet_use_timer = (id & HPET_ID_LEGSUP); + + /* + * hpet period is in femto seconds per cycle + * so we need to convert this to ns/cyc units + * aproximated by mult/2^shift + * + * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift + * fsec/cyc * 1ns/1000000fsec * 2^shift = mult + * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult + * (fsec/cyc << shift)/1000000 = mult + * (hpet_period << shift)/FSEC_PER_NSEC = mult + */ + tmp = (u64)hpet_period << HPET_SHIFT; + do_div(tmp, FSEC_PER_NSEC); + clocksource_hpet.mult = (u32)tmp; + clocksource_register(&clocksource_hpet); + + return hpet_timer_stop_set_go(hpet_tick); +} + +int hpet_reenable(void) +{ + return hpet_timer_stop_set_go(hpet_tick); +} + +/* + * calibrate_tsc() calibrates the processor TSC in a very simple way, comparing + * it to the HPET timer of known frequency. + */ + +#define TICK_COUNT 100000000 +#define SMI_THRESHOLD 50000 +#define MAX_TRIES 5 + +/* + * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none + * occurs between the reads of the hpet & TSC. + */ +static void __init read_hpet_tsc(int *hpet, int *tsc) +{ + int tsc1, tsc2, hpet1, i; + + for (i = 0; i < MAX_TRIES; i++) { + tsc1 = get_cycles_sync(); + hpet1 = hpet_readl(HPET_COUNTER); + tsc2 = get_cycles_sync(); + if ((tsc2 - tsc1) < SMI_THRESHOLD) + break; + } + *hpet = hpet1; + *tsc = tsc2; +} + +unsigned int __init hpet_calibrate_tsc(void) +{ + int tsc_start, hpet_start; + int tsc_now, hpet_now; + unsigned long flags; + + local_irq_save(flags); + + read_hpet_tsc(&hpet_start, &tsc_start); + + do { + local_irq_disable(); + read_hpet_tsc(&hpet_now, &tsc_now); + local_irq_restore(flags); + } while ((tsc_now - tsc_start) < TICK_COUNT && + (hpet_now - hpet_start) < TICK_COUNT); + + return (tsc_now - tsc_start) * 1000000000L + / ((hpet_now - hpet_start) * hpet_period / 1000); +} + +#ifdef CONFIG_HPET_EMULATE_RTC +/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET + * is enabled, we support RTC interrupt functionality in software. + * RTC has 3 kinds of interrupts: + * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock + * is updated + * 2) Alarm Interrupt - generate an interrupt at a specific time of day + * 3) Periodic Interrupt - generate periodic interrupt, with frequencies + * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) + * (1) and (2) above are implemented using polling at a frequency of + * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt + * overhead. (DEFAULT_RTC_INT_FREQ) + * For (3), we use interrupts at 64Hz or user specified periodic + * frequency, whichever is higher. + */ +#include <linux/rtc.h> + +#define DEFAULT_RTC_INT_FREQ 64 +#define RTC_NUM_INTS 1 + +static unsigned long UIE_on; +static unsigned long prev_update_sec; + +static unsigned long AIE_on; +static struct rtc_time alarm_time; + +static unsigned long PIE_on; +static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ; +static unsigned long PIE_count; + +static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */ +static unsigned int hpet_t1_cmp; /* cached comparator register */ + +int is_hpet_enabled(void) +{ + return hpet_address != 0; +} + +/* + * Timer 1 for RTC, we do not use periodic interrupt feature, + * even if HPET supports periodic interrupts on Timer 1. + * The reason being, to set up a periodic interrupt in HPET, we need to + * stop the main counter. And if we do that everytime someone diables/enables + * RTC, we will have adverse effect on main kernel timer running on Timer 0. + * So, for the time being, simulate the periodic interrupt in software. + * + * hpet_rtc_timer_init() is called for the first time and during subsequent + * interuppts reinit happens through hpet_rtc_timer_reinit(). + */ +int hpet_rtc_timer_init(void) +{ + unsigned int cfg, cnt; + unsigned long flags; + + if (!is_hpet_enabled()) + return 0; + /* + * Set the counter 1 and enable the interrupts. + */ + if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) + hpet_rtc_int_freq = PIE_freq; + else + hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; + + local_irq_save(flags); + + cnt = hpet_readl(HPET_COUNTER); + cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); + hpet_writel(cnt, HPET_T1_CMP); + hpet_t1_cmp = cnt; + + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T1_CFG); + + local_irq_restore(flags); + + return 1; +} + +static void hpet_rtc_timer_reinit(void) +{ + unsigned int cfg, cnt, ticks_per_int, lost_ints; + + if (unlikely(!(PIE_on | AIE_on | UIE_on))) { + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); + return; + } + + if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) + hpet_rtc_int_freq = PIE_freq; + else + hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; + + /* It is more accurate to use the comparator value than current count.*/ + ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq; + hpet_t1_cmp += ticks_per_int; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + + /* + * If the interrupt handler was delayed too long, the write above tries + * to schedule the next interrupt in the past and the hardware would + * not interrupt until the counter had wrapped around. + * So we have to check that the comparator wasn't set to a past time. + */ + cnt = hpet_readl(HPET_COUNTER); + if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) { + lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1; + /* Make sure that, even with the time needed to execute + * this code, the next scheduled interrupt has been moved + * back to the future: */ + lost_ints++; + + hpet_t1_cmp += lost_ints * ticks_per_int; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + + if (PIE_on) + PIE_count += lost_ints; + + if (printk_ratelimit()) + printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", + hpet_rtc_int_freq); + } +} + +/* + * The functions below are called from rtc driver. + * Return 0 if HPET is not being used. + * Otherwise do the necessary changes and return 1. + */ +int hpet_mask_rtc_irq_bit(unsigned long bit_mask) +{ + if (!is_hpet_enabled()) + return 0; + + if (bit_mask & RTC_UIE) + UIE_on = 0; + if (bit_mask & RTC_PIE) + PIE_on = 0; + if (bit_mask & RTC_AIE) + AIE_on = 0; + + return 1; +} + +int hpet_set_rtc_irq_bit(unsigned long bit_mask) +{ + int timer_init_reqd = 0; + + if (!is_hpet_enabled()) + return 0; + + if (!(PIE_on | AIE_on | UIE_on)) + timer_init_reqd = 1; + + if (bit_mask & RTC_UIE) { + UIE_on = 1; + } + if (bit_mask & RTC_PIE) { + PIE_on = 1; + PIE_count = 0; + } + if (bit_mask & RTC_AIE) { + AIE_on = 1; + } + + if (timer_init_reqd) + hpet_rtc_timer_init(); + + return 1; +} + +int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec) +{ + if (!is_hpet_enabled()) + return 0; + + alarm_time.tm_hour = hrs; + alarm_time.tm_min = min; + alarm_time.tm_sec = sec; + + return 1; +} + +int hpet_set_periodic_freq(unsigned long freq) +{ + if (!is_hpet_enabled()) + return 0; + + PIE_freq = freq; + PIE_count = 0; + + return 1; +} + +int hpet_rtc_dropped_irq(void) +{ + if (!is_hpet_enabled()) + return 0; + + return 1; +} + +irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) +{ + struct rtc_time curr_time; + unsigned long rtc_int_flag = 0; + int call_rtc_interrupt = 0; + + hpet_rtc_timer_reinit(); + + if (UIE_on | AIE_on) { + rtc_get_rtc_time(&curr_time); + } + if (UIE_on) { + if (curr_time.tm_sec != prev_update_sec) { + /* Set update int info, call real rtc int routine */ + call_rtc_interrupt = 1; + rtc_int_flag = RTC_UF; + prev_update_sec = curr_time.tm_sec; + } + } + if (PIE_on) { + PIE_count++; + if (PIE_count >= hpet_rtc_int_freq/PIE_freq) { + /* Set periodic int info, call real rtc int routine */ + call_rtc_interrupt = 1; + rtc_int_flag |= RTC_PF; + PIE_count = 0; + } + } + if (AIE_on) { + if ((curr_time.tm_sec == alarm_time.tm_sec) && + (curr_time.tm_min == alarm_time.tm_min) && + (curr_time.tm_hour == alarm_time.tm_hour)) { + /* Set alarm int info, call real rtc int routine */ + call_rtc_interrupt = 1; + rtc_int_flag |= RTC_AF; + } + } + if (call_rtc_interrupt) { + rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); + rtc_interrupt(rtc_int_flag, dev_id); + } + return IRQ_HANDLED; +} +#endif + +static int __init nohpet_setup(char *s) +{ + nohpet = 1; + return 1; +} + +__setup("nohpet", nohpet_setup); diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c new file mode 100644 index 000000000000..e3d4b73bfdb0 --- /dev/null +++ b/arch/x86/kernel/i386_ksyms_32.c @@ -0,0 +1,30 @@ +#include <linux/module.h> +#include <asm/checksum.h> +#include <asm/desc.h> + +EXPORT_SYMBOL(__down_failed); +EXPORT_SYMBOL(__down_failed_interruptible); +EXPORT_SYMBOL(__down_failed_trylock); +EXPORT_SYMBOL(__up_wakeup); +/* Networking helper routines. */ +EXPORT_SYMBOL(csum_partial_copy_generic); + +EXPORT_SYMBOL(__get_user_1); +EXPORT_SYMBOL(__get_user_2); +EXPORT_SYMBOL(__get_user_4); + +EXPORT_SYMBOL(__put_user_1); +EXPORT_SYMBOL(__put_user_2); +EXPORT_SYMBOL(__put_user_4); +EXPORT_SYMBOL(__put_user_8); + +EXPORT_SYMBOL(strstr); + +#ifdef CONFIG_SMP +extern void FASTCALL( __write_lock_failed(rwlock_t *rw)); +extern void FASTCALL( __read_lock_failed(rwlock_t *rw)); +EXPORT_SYMBOL(__write_lock_failed); +EXPORT_SYMBOL(__read_lock_failed); +#endif + +EXPORT_SYMBOL(csum_partial); diff --git a/arch/x86/kernel/i387_32.c b/arch/x86/kernel/i387_32.c new file mode 100644 index 000000000000..665847281ed2 --- /dev/null +++ b/arch/x86/kernel/i387_32.c @@ -0,0 +1,546 @@ +/* + * linux/arch/i386/kernel/i387.c + * + * Copyright (C) 1994 Linus Torvalds + * + * Pentium III FXSR, SSE support + * General FPU state handling cleanups + * Gareth Hughes <gareth@valinux.com>, May 2000 + */ + +#include <linux/sched.h> +#include <linux/module.h> +#include <asm/processor.h> +#include <asm/i387.h> +#include <asm/math_emu.h> +#include <asm/sigcontext.h> +#include <asm/user.h> +#include <asm/ptrace.h> +#include <asm/uaccess.h> + +#ifdef CONFIG_MATH_EMULATION +#define HAVE_HWFP (boot_cpu_data.hard_math) +#else +#define HAVE_HWFP 1 +#endif + +static unsigned long mxcsr_feature_mask __read_mostly = 0xffffffff; + +void mxcsr_feature_mask_init(void) +{ + unsigned long mask = 0; + clts(); + if (cpu_has_fxsr) { + memset(¤t->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct)); + asm volatile("fxsave %0" : : "m" (current->thread.i387.fxsave)); + mask = current->thread.i387.fxsave.mxcsr_mask; + if (mask == 0) mask = 0x0000ffbf; + } + mxcsr_feature_mask &= mask; + stts(); +} + +/* + * The _current_ task is using the FPU for the first time + * so initialize it and set the mxcsr to its default + * value at reset if we support XMM instructions and then + * remeber the current task has used the FPU. + */ +void init_fpu(struct task_struct *tsk) +{ + if (cpu_has_fxsr) { + memset(&tsk->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct)); + tsk->thread.i387.fxsave.cwd = 0x37f; + if (cpu_has_xmm) + tsk->thread.i387.fxsave.mxcsr = 0x1f80; + } else { + memset(&tsk->thread.i387.fsave, 0, sizeof(struct i387_fsave_struct)); + tsk->thread.i387.fsave.cwd = 0xffff037fu; + tsk->thread.i387.fsave.swd = 0xffff0000u; + tsk->thread.i387.fsave.twd = 0xffffffffu; + tsk->thread.i387.fsave.fos = 0xffff0000u; + } + /* only the device not available exception or ptrace can call init_fpu */ + set_stopped_child_used_math(tsk); +} + +/* + * FPU lazy state save handling. + */ + +void kernel_fpu_begin(void) +{ + struct thread_info *thread = current_thread_info(); + + preempt_disable(); + if (thread->status & TS_USEDFPU) { + __save_init_fpu(thread->task); + return; + } + clts(); +} +EXPORT_SYMBOL_GPL(kernel_fpu_begin); + +/* + * FPU tag word conversions. + */ + +static inline unsigned short twd_i387_to_fxsr( unsigned short twd ) +{ + unsigned int tmp; /* to avoid 16 bit prefixes in the code */ + + /* Transform each pair of bits into 01 (valid) or 00 (empty) */ + tmp = ~twd; + tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */ + /* and move the valid bits to the lower byte. */ + tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */ + tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */ + tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */ + return tmp; +} + +static inline unsigned long twd_fxsr_to_i387( struct i387_fxsave_struct *fxsave ) +{ + struct _fpxreg *st = NULL; + unsigned long tos = (fxsave->swd >> 11) & 7; + unsigned long twd = (unsigned long) fxsave->twd; + unsigned long tag; + unsigned long ret = 0xffff0000u; + int i; + +#define FPREG_ADDR(f, n) ((void *)&(f)->st_space + (n) * 16); + + for ( i = 0 ; i < 8 ; i++ ) { + if ( twd & 0x1 ) { + st = FPREG_ADDR( fxsave, (i - tos) & 7 ); + + switch ( st->exponent & 0x7fff ) { + case 0x7fff: + tag = 2; /* Special */ + break; + case 0x0000: + if ( !st->significand[0] && + !st->significand[1] && + !st->significand[2] && + !st->significand[3] ) { + tag = 1; /* Zero */ + } else { + tag = 2; /* Special */ + } + break; + default: + if ( st->significand[3] & 0x8000 ) { + tag = 0; /* Valid */ + } else { + tag = 2; /* Special */ + } + break; + } + } else { + tag = 3; /* Empty */ + } + ret |= (tag << (2 * i)); + twd = twd >> 1; + } + return ret; +} + +/* + * FPU state interaction. + */ + +unsigned short get_fpu_cwd( struct task_struct *tsk ) +{ + if ( cpu_has_fxsr ) { + return tsk->thread.i387.fxsave.cwd; + } else { + return (unsigned short)tsk->thread.i387.fsave.cwd; + } +} + +unsigned short get_fpu_swd( struct task_struct *tsk ) +{ + if ( cpu_has_fxsr ) { + return tsk->thread.i387.fxsave.swd; + } else { + return (unsigned short)tsk->thread.i387.fsave.swd; + } +} + +#if 0 +unsigned short get_fpu_twd( struct task_struct *tsk ) +{ + if ( cpu_has_fxsr ) { + return tsk->thread.i387.fxsave.twd; + } else { + return (unsigned short)tsk->thread.i387.fsave.twd; + } +} +#endif /* 0 */ + +unsigned short get_fpu_mxcsr( struct task_struct *tsk ) +{ + if ( cpu_has_xmm ) { + return tsk->thread.i387.fxsave.mxcsr; + } else { + return 0x1f80; + } +} + +#if 0 + +void set_fpu_cwd( struct task_struct *tsk, unsigned short cwd ) +{ + if ( cpu_has_fxsr ) { + tsk->thread.i387.fxsave.cwd = cwd; + } else { + tsk->thread.i387.fsave.cwd = ((long)cwd | 0xffff0000u); + } +} + +void set_fpu_swd( struct task_struct *tsk, unsigned short swd ) +{ + if ( cpu_has_fxsr ) { + tsk->thread.i387.fxsave.swd = swd; + } else { + tsk->thread.i387.fsave.swd = ((long)swd | 0xffff0000u); + } +} + +void set_fpu_twd( struct task_struct *tsk, unsigned short twd ) +{ + if ( cpu_has_fxsr ) { + tsk->thread.i387.fxsave.twd = twd_i387_to_fxsr(twd); + } else { + tsk->thread.i387.fsave.twd = ((long)twd | 0xffff0000u); + } +} + +#endif /* 0 */ + +/* + * FXSR floating point environment conversions. + */ + +static int convert_fxsr_to_user( struct _fpstate __user *buf, + struct i387_fxsave_struct *fxsave ) +{ + unsigned long env[7]; + struct _fpreg __user *to; + struct _fpxreg *from; + int i; + + env[0] = (unsigned long)fxsave->cwd | 0xffff0000ul; + env[1] = (unsigned long)fxsave->swd | 0xffff0000ul; + env[2] = twd_fxsr_to_i387(fxsave); + env[3] = fxsave->fip; + env[4] = fxsave->fcs | ((unsigned long)fxsave->fop << 16); + env[5] = fxsave->foo; + env[6] = fxsave->fos; + + if ( __copy_to_user( buf, env, 7 * sizeof(unsigned long) ) ) + return 1; + + to = &buf->_st[0]; + from = (struct _fpxreg *) &fxsave->st_space[0]; + for ( i = 0 ; i < 8 ; i++, to++, from++ ) { + unsigned long __user *t = (unsigned long __user *)to; + unsigned long *f = (unsigned long *)from; + + if (__put_user(*f, t) || + __put_user(*(f + 1), t + 1) || + __put_user(from->exponent, &to->exponent)) + return 1; + } + return 0; +} + +static int convert_fxsr_from_user( struct i387_fxsave_struct *fxsave, + struct _fpstate __user *buf ) +{ + unsigned long env[7]; + struct _fpxreg *to; + struct _fpreg __user *from; + int i; + + if ( __copy_from_user( env, buf, 7 * sizeof(long) ) ) + return 1; + + fxsave->cwd = (unsigned short)(env[0] & 0xffff); + fxsave->swd = (unsigned short)(env[1] & 0xffff); + fxsave->twd = twd_i387_to_fxsr((unsigned short)(env[2] & 0xffff)); + fxsave->fip = env[3]; + fxsave->fop = (unsigned short)((env[4] & 0xffff0000ul) >> 16); + fxsave->fcs = (env[4] & 0xffff); + fxsave->foo = env[5]; + fxsave->fos = env[6]; + + to = (struct _fpxreg *) &fxsave->st_space[0]; + from = &buf->_st[0]; + for ( i = 0 ; i < 8 ; i++, to++, from++ ) { + unsigned long *t = (unsigned long *)to; + unsigned long __user *f = (unsigned long __user *)from; + + if (__get_user(*t, f) || + __get_user(*(t + 1), f + 1) || + __get_user(to->exponent, &from->exponent)) + return 1; + } + return 0; +} + +/* + * Signal frame handlers. + */ + +static inline int save_i387_fsave( struct _fpstate __user *buf ) +{ + struct task_struct *tsk = current; + + unlazy_fpu( tsk ); + tsk->thread.i387.fsave.status = tsk->thread.i387.fsave.swd; + if ( __copy_to_user( buf, &tsk->thread.i387.fsave, + sizeof(struct i387_fsave_struct) ) ) + return -1; + return 1; +} + +static int save_i387_fxsave( struct _fpstate __user *buf ) +{ + struct task_struct *tsk = current; + int err = 0; + + unlazy_fpu( tsk ); + + if ( convert_fxsr_to_user( buf, &tsk->thread.i387.fxsave ) ) + return -1; + + err |= __put_user( tsk->thread.i387.fxsave.swd, &buf->status ); + err |= __put_user( X86_FXSR_MAGIC, &buf->magic ); + if ( err ) + return -1; + + if ( __copy_to_user( &buf->_fxsr_env[0], &tsk->thread.i387.fxsave, + sizeof(struct i387_fxsave_struct) ) ) + return -1; + return 1; +} + +int save_i387( struct _fpstate __user *buf ) +{ + if ( !used_math() ) + return 0; + + /* This will cause a "finit" to be triggered by the next + * attempted FPU operation by the 'current' process. + */ + clear_used_math(); + + if ( HAVE_HWFP ) { + if ( cpu_has_fxsr ) { + return save_i387_fxsave( buf ); + } else { + return save_i387_fsave( buf ); + } + } else { + return save_i387_soft( ¤t->thread.i387.soft, buf ); + } +} + +static inline int restore_i387_fsave( struct _fpstate __user *buf ) +{ + struct task_struct *tsk = current; + clear_fpu( tsk ); + return __copy_from_user( &tsk->thread.i387.fsave, buf, + sizeof(struct i387_fsave_struct) ); +} + +static int restore_i387_fxsave( struct _fpstate __user *buf ) +{ + int err; + struct task_struct *tsk = current; + clear_fpu( tsk ); + err = __copy_from_user( &tsk->thread.i387.fxsave, &buf->_fxsr_env[0], + sizeof(struct i387_fxsave_struct) ); + /* mxcsr reserved bits must be masked to zero for security reasons */ + tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask; + return err ? 1 : convert_fxsr_from_user( &tsk->thread.i387.fxsave, buf ); +} + +int restore_i387( struct _fpstate __user *buf ) +{ + int err; + + if ( HAVE_HWFP ) { + if ( cpu_has_fxsr ) { + err = restore_i387_fxsave( buf ); + } else { + err = restore_i387_fsave( buf ); + } + } else { + err = restore_i387_soft( ¤t->thread.i387.soft, buf ); + } + set_used_math(); + return err; +} + +/* + * ptrace request handlers. + */ + +static inline int get_fpregs_fsave( struct user_i387_struct __user *buf, + struct task_struct *tsk ) +{ + return __copy_to_user( buf, &tsk->thread.i387.fsave, + sizeof(struct user_i387_struct) ); +} + +static inline int get_fpregs_fxsave( struct user_i387_struct __user *buf, + struct task_struct *tsk ) +{ + return convert_fxsr_to_user( (struct _fpstate __user *)buf, + &tsk->thread.i387.fxsave ); +} + +int get_fpregs( struct user_i387_struct __user *buf, struct task_struct *tsk ) +{ + if ( HAVE_HWFP ) { + if ( cpu_has_fxsr ) { + return get_fpregs_fxsave( buf, tsk ); + } else { + return get_fpregs_fsave( buf, tsk ); + } + } else { + return save_i387_soft( &tsk->thread.i387.soft, + (struct _fpstate __user *)buf ); + } +} + +static inline int set_fpregs_fsave( struct task_struct *tsk, + struct user_i387_struct __user *buf ) +{ + return __copy_from_user( &tsk->thread.i387.fsave, buf, + sizeof(struct user_i387_struct) ); +} + +static inline int set_fpregs_fxsave( struct task_struct *tsk, + struct user_i387_struct __user *buf ) +{ + return convert_fxsr_from_user( &tsk->thread.i387.fxsave, + (struct _fpstate __user *)buf ); +} + +int set_fpregs( struct task_struct *tsk, struct user_i387_struct __user *buf ) +{ + if ( HAVE_HWFP ) { + if ( cpu_has_fxsr ) { + return set_fpregs_fxsave( tsk, buf ); + } else { + return set_fpregs_fsave( tsk, buf ); + } + } else { + return restore_i387_soft( &tsk->thread.i387.soft, + (struct _fpstate __user *)buf ); + } +} + +int get_fpxregs( struct user_fxsr_struct __user *buf, struct task_struct *tsk ) +{ + if ( cpu_has_fxsr ) { + if (__copy_to_user( buf, &tsk->thread.i387.fxsave, + sizeof(struct user_fxsr_struct) )) + return -EFAULT; + return 0; + } else { + return -EIO; + } +} + +int set_fpxregs( struct task_struct *tsk, struct user_fxsr_struct __user *buf ) +{ + int ret = 0; + + if ( cpu_has_fxsr ) { + if (__copy_from_user( &tsk->thread.i387.fxsave, buf, + sizeof(struct user_fxsr_struct) )) + ret = -EFAULT; + /* mxcsr reserved bits must be masked to zero for security reasons */ + tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask; + } else { + ret = -EIO; + } + return ret; +} + +/* + * FPU state for core dumps. + */ + +static inline void copy_fpu_fsave( struct task_struct *tsk, + struct user_i387_struct *fpu ) +{ + memcpy( fpu, &tsk->thread.i387.fsave, + sizeof(struct user_i387_struct) ); +} + +static inline void copy_fpu_fxsave( struct task_struct *tsk, + struct user_i387_struct *fpu ) +{ + unsigned short *to; + unsigned short *from; + int i; + + memcpy( fpu, &tsk->thread.i387.fxsave, 7 * sizeof(long) ); + + to = (unsigned short *)&fpu->st_space[0]; + from = (unsigned short *)&tsk->thread.i387.fxsave.st_space[0]; + for ( i = 0 ; i < 8 ; i++, to += 5, from += 8 ) { + memcpy( to, from, 5 * sizeof(unsigned short) ); + } +} + +int dump_fpu( struct pt_regs *regs, struct user_i387_struct *fpu ) +{ + int fpvalid; + struct task_struct *tsk = current; + + fpvalid = !!used_math(); + if ( fpvalid ) { + unlazy_fpu( tsk ); + if ( cpu_has_fxsr ) { + copy_fpu_fxsave( tsk, fpu ); + } else { + copy_fpu_fsave( tsk, fpu ); + } + } + + return fpvalid; +} +EXPORT_SYMBOL(dump_fpu); + +int dump_task_fpu(struct task_struct *tsk, struct user_i387_struct *fpu) +{ + int fpvalid = !!tsk_used_math(tsk); + + if (fpvalid) { + if (tsk == current) + unlazy_fpu(tsk); + if (cpu_has_fxsr) + copy_fpu_fxsave(tsk, fpu); + else + copy_fpu_fsave(tsk, fpu); + } + return fpvalid; +} + +int dump_task_extended_fpu(struct task_struct *tsk, struct user_fxsr_struct *fpu) +{ + int fpvalid = tsk_used_math(tsk) && cpu_has_fxsr; + + if (fpvalid) { + if (tsk == current) + unlazy_fpu(tsk); + memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(*fpu)); + } + return fpvalid; +} diff --git a/arch/x86/kernel/i387_64.c b/arch/x86/kernel/i387_64.c new file mode 100644 index 000000000000..1d58c13bc6bc --- /dev/null +++ b/arch/x86/kernel/i387_64.c @@ -0,0 +1,151 @@ +/* + * linux/arch/x86_64/kernel/i387.c + * + * Copyright (C) 1994 Linus Torvalds + * Copyright (C) 2002 Andi Kleen, SuSE Labs + * + * Pentium III FXSR, SSE support + * General FPU state handling cleanups + * Gareth Hughes <gareth@valinux.com>, May 2000 + * + * x86-64 rework 2002 Andi Kleen. + * Does direct fxsave in and out of user space now for signal handlers. + * All the FSAVE<->FXSAVE conversion code has been moved to the 32bit emulation, + * the 64bit user space sees a FXSAVE frame directly. + */ + +#include <linux/sched.h> +#include <linux/init.h> +#include <asm/processor.h> +#include <asm/i387.h> +#include <asm/sigcontext.h> +#include <asm/user.h> +#include <asm/ptrace.h> +#include <asm/uaccess.h> + +unsigned int mxcsr_feature_mask __read_mostly = 0xffffffff; + +void mxcsr_feature_mask_init(void) +{ + unsigned int mask; + clts(); + memset(¤t->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct)); + asm volatile("fxsave %0" : : "m" (current->thread.i387.fxsave)); + mask = current->thread.i387.fxsave.mxcsr_mask; + if (mask == 0) mask = 0x0000ffbf; + mxcsr_feature_mask &= mask; + stts(); +} + +/* + * Called at bootup to set up the initial FPU state that is later cloned + * into all processes. + */ +void __cpuinit fpu_init(void) +{ + unsigned long oldcr0 = read_cr0(); + extern void __bad_fxsave_alignment(void); + + if (offsetof(struct task_struct, thread.i387.fxsave) & 15) + __bad_fxsave_alignment(); + set_in_cr4(X86_CR4_OSFXSR); + set_in_cr4(X86_CR4_OSXMMEXCPT); + + write_cr0(oldcr0 & ~((1UL<<3)|(1UL<<2))); /* clear TS and EM */ + + mxcsr_feature_mask_init(); + /* clean state in init */ + current_thread_info()->status = 0; + clear_used_math(); +} + +void init_fpu(struct task_struct *child) +{ + if (tsk_used_math(child)) { + if (child == current) + unlazy_fpu(child); + return; + } + memset(&child->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct)); + child->thread.i387.fxsave.cwd = 0x37f; + child->thread.i387.fxsave.mxcsr = 0x1f80; + /* only the device not available exception or ptrace can call init_fpu */ + set_stopped_child_used_math(child); +} + +/* + * Signal frame handlers. + */ + +int save_i387(struct _fpstate __user *buf) +{ + struct task_struct *tsk = current; + int err = 0; + + BUILD_BUG_ON(sizeof(struct user_i387_struct) != + sizeof(tsk->thread.i387.fxsave)); + + if ((unsigned long)buf % 16) + printk("save_i387: bad fpstate %p\n",buf); + + if (!used_math()) + return 0; + clear_used_math(); /* trigger finit */ + if (task_thread_info(tsk)->status & TS_USEDFPU) { + err = save_i387_checking((struct i387_fxsave_struct __user *)buf); + if (err) return err; + stts(); + } else { + if (__copy_to_user(buf, &tsk->thread.i387.fxsave, + sizeof(struct i387_fxsave_struct))) + return -1; + } + return 1; +} + +/* + * ptrace request handlers. + */ + +int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *tsk) +{ + init_fpu(tsk); + return __copy_to_user(buf, &tsk->thread.i387.fxsave, + sizeof(struct user_i387_struct)) ? -EFAULT : 0; +} + +int set_fpregs(struct task_struct *tsk, struct user_i387_struct __user *buf) +{ + if (__copy_from_user(&tsk->thread.i387.fxsave, buf, + sizeof(struct user_i387_struct))) + return -EFAULT; + return 0; +} + +/* + * FPU state for core dumps. + */ + +int dump_fpu( struct pt_regs *regs, struct user_i387_struct *fpu ) +{ + struct task_struct *tsk = current; + + if (!used_math()) + return 0; + + unlazy_fpu(tsk); + memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(struct user_i387_struct)); + return 1; +} + +int dump_task_fpu(struct task_struct *tsk, struct user_i387_struct *fpu) +{ + int fpvalid = !!tsk_used_math(tsk); + + if (fpvalid) { + if (tsk == current) + unlazy_fpu(tsk); + memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(struct user_i387_struct)); +} + return fpvalid; +} diff --git a/arch/x86/kernel/i8237.c b/arch/x86/kernel/i8237.c new file mode 100644 index 000000000000..6f508e8d7c57 --- /dev/null +++ b/arch/x86/kernel/i8237.c @@ -0,0 +1,72 @@ +/* + * i8237.c: 8237A DMA controller suspend functions. + * + * Written by Pierre Ossman, 2005. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/init.h> +#include <linux/sysdev.h> + +#include <asm/dma.h> + +/* + * This module just handles suspend/resume issues with the + * 8237A DMA controller (used for ISA and LPC). + * Allocation is handled in kernel/dma.c and normal usage is + * in asm/dma.h. + */ + +static int i8237A_resume(struct sys_device *dev) +{ + unsigned long flags; + int i; + + flags = claim_dma_lock(); + + dma_outb(DMA1_RESET_REG, 0); + dma_outb(DMA2_RESET_REG, 0); + + for (i = 0;i < 8;i++) { + set_dma_addr(i, 0x000000); + /* DMA count is a bit weird so this is not 0 */ + set_dma_count(i, 1); + } + + /* Enable cascade DMA or channel 0-3 won't work */ + enable_dma(4); + + release_dma_lock(flags); + + return 0; +} + +static int i8237A_suspend(struct sys_device *dev, pm_message_t state) +{ + return 0; +} + +static struct sysdev_class i8237_sysdev_class = { + set_kset_name("i8237"), + .suspend = i8237A_suspend, + .resume = i8237A_resume, +}; + +static struct sys_device device_i8237A = { + .id = 0, + .cls = &i8237_sysdev_class, +}; + +static int __init i8237A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8237_sysdev_class); + if (!error) + error = sysdev_register(&device_i8237A); + return error; +} + +device_initcall(i8237A_init_sysfs); diff --git a/arch/x86/kernel/i8253_32.c b/arch/x86/kernel/i8253_32.c new file mode 100644 index 000000000000..6d839f2f1b1a --- /dev/null +++ b/arch/x86/kernel/i8253_32.c @@ -0,0 +1,206 @@ +/* + * i8253.c 8253/PIT functions + * + */ +#include <linux/clockchips.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/spinlock.h> + +#include <asm/smp.h> +#include <asm/delay.h> +#include <asm/i8253.h> +#include <asm/io.h> +#include <asm/timer.h> + +DEFINE_SPINLOCK(i8253_lock); +EXPORT_SYMBOL(i8253_lock); + +/* + * HPET replaces the PIT, when enabled. So we need to know, which of + * the two timers is used + */ +struct clock_event_device *global_clock_event; + +/* + * Initialize the PIT timer. + * + * This is also called after resume to bring the PIT into operation again. + */ +static void init_pit_timer(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + + switch(mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* binary, mode 2, LSB/MSB, ch 0 */ + outb_p(0x34, PIT_MODE); + outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ + outb(LATCH >> 8 , PIT_CH0); /* MSB */ + break; + + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + if (evt->mode == CLOCK_EVT_MODE_PERIODIC || + evt->mode == CLOCK_EVT_MODE_ONESHOT) { + outb_p(0x30, PIT_MODE); + outb_p(0, PIT_CH0); + outb_p(0, PIT_CH0); + } + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* One shot setup */ + outb_p(0x38, PIT_MODE); + break; + + case CLOCK_EVT_MODE_RESUME: + /* Nothing to do here */ + break; + } + spin_unlock_irqrestore(&i8253_lock, flags); +} + +/* + * Program the next event in oneshot mode + * + * Delta is given in PIT ticks + */ +static int pit_next_event(unsigned long delta, struct clock_event_device *evt) +{ + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + outb_p(delta & 0xff , PIT_CH0); /* LSB */ + outb(delta >> 8 , PIT_CH0); /* MSB */ + spin_unlock_irqrestore(&i8253_lock, flags); + + return 0; +} + +/* + * On UP the PIT can serve all of the possible timer functions. On SMP systems + * it can be solely used for the global tick. + * + * The profiling and update capabilites are switched off once the local apic is + * registered. This mechanism replaces the previous #ifdef LOCAL_APIC - + * !using_apic_timer decisions in do_timer_interrupt_hook() + */ +struct clock_event_device pit_clockevent = { + .name = "pit", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = init_pit_timer, + .set_next_event = pit_next_event, + .shift = 32, + .irq = 0, +}; + +/* + * Initialize the conversion factor and the min/max deltas of the clock event + * structure and register the clock event source with the framework. + */ +void __init setup_pit_timer(void) +{ + /* + * Start pit with the boot cpu mask and make it global after the + * IO_APIC has been initialized. + */ + pit_clockevent.cpumask = cpumask_of_cpu(smp_processor_id()); + pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32); + pit_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFF, &pit_clockevent); + pit_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &pit_clockevent); + clockevents_register_device(&pit_clockevent); + global_clock_event = &pit_clockevent; +} + +/* + * Since the PIT overflows every tick, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static cycle_t pit_read(void) +{ + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + spin_lock_irqsave(&i8253_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + outb_p(0x00, PIT_MODE); /* latch the count ASAP */ + count = inb_p(PIT_CH0); /* read the latched count */ + count |= inb_p(PIT_CH0) << 8; + + /* VIA686a test code... reset the latch if count > max + 1 */ + if (count > LATCH) { + outb_p(0x34, PIT_MODE); + outb_p(LATCH & 0xff, PIT_CH0); + outb(LATCH >> 8, PIT_CH0); + count = LATCH - 1; + } + + /* + * It's possible for count to appear to go the wrong way for a + * couple of reasons: + * + * 1. The timer counter underflows, but we haven't handled the + * resulting interrupt and incremented jiffies yet. + * 2. Hardware problem with the timer, not giving us continuous time, + * the counter does small "jumps" upwards on some Pentium systems, + * (see c't 95/10 page 335 for Neptun bug.) + * + * Previous attempts to handle these cases intelligently were + * buggy, so we just do the simple thing now. + */ + if (count > old_count && jifs == old_jifs) { + count = old_count; + } + old_count = count; + old_jifs = jifs; + + spin_unlock_irqrestore(&i8253_lock, flags); + + count = (LATCH - 1) - count; + + return (cycle_t)(jifs * LATCH) + count; +} + +static struct clocksource clocksource_pit = { + .name = "pit", + .rating = 110, + .read = pit_read, + .mask = CLOCKSOURCE_MASK(32), + .mult = 0, + .shift = 20, +}; + +static int __init init_pit_clocksource(void) +{ + if (num_possible_cpus() > 1) /* PIT does not scale! */ + return 0; + + clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20); + return clocksource_register(&clocksource_pit); +} +arch_initcall(init_pit_clocksource); diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c new file mode 100644 index 000000000000..0499cbe9871a --- /dev/null +++ b/arch/x86/kernel/i8259_32.c @@ -0,0 +1,420 @@ +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#include <asm/8253pit.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/timer.h> +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> +#include <asm/arch_hooks.h> +#include <asm/i8259.h> + +#include <io_ports.h> + +/* + * This is the 'legacy' 8259A Programmable Interrupt Controller, + * present in the majority of PC/AT boxes. + * plus some generic x86 specific things if generic specifics makes + * any sense at all. + * this file should become arch/i386/kernel/irq.c when the old irq.c + * moves to arch independent land + */ + +static int i8259A_auto_eoi; +DEFINE_SPINLOCK(i8259A_lock); +static void mask_and_ack_8259A(unsigned int); + +static struct irq_chip i8259A_chip = { + .name = "XT-PIC", + .mask = disable_8259A_irq, + .disable = disable_8259A_irq, + .unmask = enable_8259A_irq, + .mask_ack = mask_and_ack_8259A, +}; + +/* + * 8259A PIC functions to handle ISA devices: + */ + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +unsigned int cached_irq_mask = 0xffff; + +/* + * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) + * boards the timer interrupt is not really connected to any IO-APIC pin, + * it's fed to the master 8259A's IR0 line only. + * + * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. + * this 'mixed mode' IRQ handling costs nothing because it's only used + * at IRQ setup time. + */ +unsigned long io_apic_irqs; + +void disable_8259A_irq(unsigned int irq) +{ + unsigned int mask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask |= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void enable_8259A_irq(unsigned int irq) +{ + unsigned int mask = ~(1 << irq); + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask &= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +int i8259A_irq_pending(unsigned int irq) +{ + unsigned int mask = 1<<irq; + unsigned long flags; + int ret; + + spin_lock_irqsave(&i8259A_lock, flags); + if (irq < 8) + ret = inb(PIC_MASTER_CMD) & mask; + else + ret = inb(PIC_SLAVE_CMD) & (mask >> 8); + spin_unlock_irqrestore(&i8259A_lock, flags); + + return ret; +} + +void make_8259A_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + io_apic_irqs &= ~(1<<irq); + set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, + "XT"); + enable_irq(irq); +} + +/* + * This function assumes to be called rarely. Switching between + * 8259A registers is slow. + * This has to be protected by the irq controller spinlock + * before being called. + */ +static inline int i8259A_irq_real(unsigned int irq) +{ + int value; + int irqmask = 1<<irq; + + if (irq < 8) { + outb(0x0B,PIC_MASTER_CMD); /* ISR register */ + value = inb(PIC_MASTER_CMD) & irqmask; + outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ + return value; + } + outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ + value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); + outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +static void mask_and_ack_8259A(unsigned int irq) +{ + unsigned int irqmask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (cached_irq_mask & irqmask) + goto spurious_8259A_irq; + cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ + outb(cached_slave_mask, PIC_SLAVE_IMR); + outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ + } else { + inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ + outb(cached_master_mask, PIC_MASTER_IMR); + outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ + } + spin_unlock_irqrestore(&i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { + printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +static char irq_trigger[2]; +/** + * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ + */ +static void restore_ELCR(char *trigger) +{ + outb(trigger[0], 0x4d0); + outb(trigger[1], 0x4d1); +} + +static void save_ELCR(char *trigger) +{ + /* IRQ 0,1,2,8,13 are marked as reserved */ + trigger[0] = inb(0x4d0) & 0xF8; + trigger[1] = inb(0x4d1) & 0xDE; +} + +static int i8259A_resume(struct sys_device *dev) +{ + init_8259A(i8259A_auto_eoi); + restore_ELCR(irq_trigger); + return 0; +} + +static int i8259A_suspend(struct sys_device *dev, pm_message_t state) +{ + save_ELCR(irq_trigger); + return 0; +} + +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ + return 0; +} + +static struct sysdev_class i8259_sysdev_class = { + set_kset_name("i8259"), + .suspend = i8259A_suspend, + .resume = i8259A_resume, + .shutdown = i8259A_shutdown, +}; + +static struct sys_device device_i8259A = { + .id = 0, + .cls = &i8259_sysdev_class, +}; + +static int __init i8259A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8259_sysdev_class); + if (!error) + error = sysdev_register(&device_i8259A); + return error; +} + +device_initcall(i8259A_init_sysfs); + +void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + /* + * outb_p - this has to work on a wide range of PC hardware. + */ + outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ + outb_p(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ + outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ + if (auto_eoi) /* master does Auto EOI */ + outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + else /* master expects normal EOI */ + outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + + outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ + outb_p(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ + outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ + outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ + if (auto_eoi) + /* + * In AEOI mode we just have to mask the interrupt + * when acking. + */ + i8259A_chip.mask_ack = disable_8259A_irq; + else + i8259A_chip.mask_ack = mask_and_ack_8259A; + + udelay(100); /* wait for 8259A to initialize */ + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + extern void math_error(void __user *); + outb(0,0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->eip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { math_error_irq, 0, CPU_MASK_NONE, "fpu", NULL, NULL }; + +void __init init_ISA_irqs (void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + + if (i < 16) { + /* + * 16 old-style INTA-cycle interrupts: + */ + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } else { + /* + * 'high' PCI IRQs filled in on demand + */ + irq_desc[i].chip = &no_irq_chip; + } + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + /* all the set up before the call gates are initialised */ + pre_intr_init_hook(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (i >= NR_IRQS) + break; + if (vector != SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); + } + + /* setup after call gates are initialised (usually add in + * the architecture specific gates) + */ + intr_init_hook(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c new file mode 100644 index 000000000000..948cae646099 --- /dev/null +++ b/arch/x86/kernel/i8259_64.c @@ -0,0 +1,544 @@ +#include <linux/linkage.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#include <asm/acpi.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/hw_irq.h> +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> + +/* + * Common place to define all x86 IRQ vectors + * + * This builds up the IRQ handler stubs using some ugly macros in irq.h + * + * These macros create the low-level assembly IRQ routines that save + * register context and call do_IRQ(). do_IRQ() then does all the + * operations that are needed to keep the AT (or SMP IOAPIC) + * interrupt-controller happy. + */ + +#define BI(x,y) \ + BUILD_IRQ(x##y) + +#define BUILD_16_IRQS(x) \ + BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ + BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ + BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ + BI(x,c) BI(x,d) BI(x,e) BI(x,f) + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) +BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) +BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) +BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) + +#undef BUILD_16_IRQS +#undef BI + + +#define IRQ(x,y) \ + IRQ##x##y##_interrupt + +#define IRQLIST_16(x) \ + IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ + IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ + IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ + IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) + +/* for the irq vectors */ +static void (*interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { + IRQLIST_16(0x2), IRQLIST_16(0x3), + IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), + IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), + IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) +}; + +#undef IRQ +#undef IRQLIST_16 + +/* + * This is the 'legacy' 8259A Programmable Interrupt Controller, + * present in the majority of PC/AT boxes. + * plus some generic x86 specific things if generic specifics makes + * any sense at all. + * this file should become arch/i386/kernel/irq.c when the old irq.c + * moves to arch independent land + */ + +static int i8259A_auto_eoi; +DEFINE_SPINLOCK(i8259A_lock); +static void mask_and_ack_8259A(unsigned int); + +static struct irq_chip i8259A_chip = { + .name = "XT-PIC", + .mask = disable_8259A_irq, + .disable = disable_8259A_irq, + .unmask = enable_8259A_irq, + .mask_ack = mask_and_ack_8259A, +}; + +/* + * 8259A PIC functions to handle ISA devices: + */ + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +static unsigned int cached_irq_mask = 0xffff; + +#define __byte(x,y) (((unsigned char *)&(y))[x]) +#define cached_21 (__byte(0,cached_irq_mask)) +#define cached_A1 (__byte(1,cached_irq_mask)) + +/* + * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) + * boards the timer interrupt is not really connected to any IO-APIC pin, + * it's fed to the master 8259A's IR0 line only. + * + * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. + * this 'mixed mode' IRQ handling costs nothing because it's only used + * at IRQ setup time. + */ +unsigned long io_apic_irqs; + +void disable_8259A_irq(unsigned int irq) +{ + unsigned int mask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask |= mask; + if (irq & 8) + outb(cached_A1,0xA1); + else + outb(cached_21,0x21); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void enable_8259A_irq(unsigned int irq) +{ + unsigned int mask = ~(1 << irq); + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask &= mask; + if (irq & 8) + outb(cached_A1,0xA1); + else + outb(cached_21,0x21); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +int i8259A_irq_pending(unsigned int irq) +{ + unsigned int mask = 1<<irq; + unsigned long flags; + int ret; + + spin_lock_irqsave(&i8259A_lock, flags); + if (irq < 8) + ret = inb(0x20) & mask; + else + ret = inb(0xA0) & (mask >> 8); + spin_unlock_irqrestore(&i8259A_lock, flags); + + return ret; +} + +void make_8259A_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + io_apic_irqs &= ~(1<<irq); + set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, + "XT"); + enable_irq(irq); +} + +/* + * This function assumes to be called rarely. Switching between + * 8259A registers is slow. + * This has to be protected by the irq controller spinlock + * before being called. + */ +static inline int i8259A_irq_real(unsigned int irq) +{ + int value; + int irqmask = 1<<irq; + + if (irq < 8) { + outb(0x0B,0x20); /* ISR register */ + value = inb(0x20) & irqmask; + outb(0x0A,0x20); /* back to the IRR register */ + return value; + } + outb(0x0B,0xA0); /* ISR register */ + value = inb(0xA0) & (irqmask >> 8); + outb(0x0A,0xA0); /* back to the IRR register */ + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +static void mask_and_ack_8259A(unsigned int irq) +{ + unsigned int irqmask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (cached_irq_mask & irqmask) + goto spurious_8259A_irq; + cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + inb(0xA1); /* DUMMY - (do we need this?) */ + outb(cached_A1,0xA1); + outb(0x60+(irq&7),0xA0);/* 'Specific EOI' to slave */ + outb(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */ + } else { + inb(0x21); /* DUMMY - (do we need this?) */ + outb(cached_21,0x21); + outb(0x60+irq,0x20); /* 'Specific EOI' to master */ + } + spin_unlock_irqrestore(&i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { + printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, 0x21); /* mask all of 8259A-1 */ + outb(0xff, 0xA1); /* mask all of 8259A-2 */ + + /* + * outb_p - this has to work on a wide range of PC hardware. + */ + outb_p(0x11, 0x20); /* ICW1: select 8259A-1 init */ + outb_p(IRQ0_VECTOR, 0x21); /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_p(0x04, 0x21); /* 8259A-1 (the master) has a slave on IR2 */ + if (auto_eoi) + outb_p(0x03, 0x21); /* master does Auto EOI */ + else + outb_p(0x01, 0x21); /* master expects normal EOI */ + + outb_p(0x11, 0xA0); /* ICW1: select 8259A-2 init */ + outb_p(IRQ8_VECTOR, 0xA1); /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_p(0x02, 0xA1); /* 8259A-2 is a slave on master's IR2 */ + outb_p(0x01, 0xA1); /* (slave's support for AEOI in flat mode + is to be investigated) */ + + if (auto_eoi) + /* + * in AEOI mode we just have to mask the interrupt + * when acking. + */ + i8259A_chip.mask_ack = disable_8259A_irq; + else + i8259A_chip.mask_ack = mask_and_ack_8259A; + + udelay(100); /* wait for 8259A to initialize */ + + outb(cached_21, 0x21); /* restore master IRQ mask */ + outb(cached_A1, 0xA1); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +static char irq_trigger[2]; +/** + * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ + */ +static void restore_ELCR(char *trigger) +{ + outb(trigger[0], 0x4d0); + outb(trigger[1], 0x4d1); +} + +static void save_ELCR(char *trigger) +{ + /* IRQ 0,1,2,8,13 are marked as reserved */ + trigger[0] = inb(0x4d0) & 0xF8; + trigger[1] = inb(0x4d1) & 0xDE; +} + +static int i8259A_resume(struct sys_device *dev) +{ + init_8259A(i8259A_auto_eoi); + restore_ELCR(irq_trigger); + return 0; +} + +static int i8259A_suspend(struct sys_device *dev, pm_message_t state) +{ + save_ELCR(irq_trigger); + return 0; +} + +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, 0x21); /* mask all of 8259A-1 */ + outb(0xff, 0xA1); /* mask all of 8259A-1 */ + return 0; +} + +static struct sysdev_class i8259_sysdev_class = { + set_kset_name("i8259"), + .suspend = i8259A_suspend, + .resume = i8259A_resume, + .shutdown = i8259A_shutdown, +}; + +static struct sys_device device_i8259A = { + .id = 0, + .cls = &i8259_sysdev_class, +}; + +static int __init i8259A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8259_sysdev_class); + if (!error) + error = sysdev_register(&device_i8259A); + return error; +} + +device_initcall(i8259A_init_sysfs); + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ + +static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL}; +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +void __init init_ISA_irqs (void) +{ + int i; + + init_bsp_APIC(); + init_8259A(0); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + + if (i < 16) { + /* + * 16 old-style INTA-cycle interrupts: + */ + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } else { + /* + * 'high' PCI IRQs filled in on demand + */ + irq_desc[i].chip = &no_irq_chip; + } + } +} + +static void setup_timer_hardware(void) +{ + outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */ + udelay(10); + outb_p(LATCH & 0xff , 0x40); /* LSB */ + udelay(10); + outb(LATCH >> 8 , 0x40); /* MSB */ +} + +static int timer_resume(struct sys_device *dev) +{ + setup_timer_hardware(); + return 0; +} + +void i8254_timer_resume(void) +{ + setup_timer_hardware(); +} + +static struct sysdev_class timer_sysclass = { + set_kset_name("timer_pit"), + .resume = timer_resume, +}; + +static struct sys_device device_timer = { + .id = 0, + .cls = &timer_sysclass, +}; + +static int __init init_timer_sysfs(void) +{ + int error = sysdev_class_register(&timer_sysclass); + if (!error) + error = sysdev_register(&device_timer); + return error; +} + +device_initcall(init_timer_sysfs); + +void __init init_IRQ(void) +{ + int i; + + init_ISA_irqs(); + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (vector != IA32_SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); + } + +#ifdef CONFIG_SMP + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); +#endif + set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + + /* self generated IPI for local APIC timer */ + set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + /* + * Set the clock to HZ Hz, we already have a valid + * vector now: + */ + setup_timer_hardware(); + + if (!acpi_ioapic) + setup_irq(2, &irq2); +} diff --git a/arch/x86/kernel/init_task_32.c b/arch/x86/kernel/init_task_32.c new file mode 100644 index 000000000000..d26fc063a760 --- /dev/null +++ b/arch/x86/kernel/init_task_32.c @@ -0,0 +1,46 @@ +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/init_task.h> +#include <linux/fs.h> +#include <linux/mqueue.h> + +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/desc.h> + +static struct fs_struct init_fs = INIT_FS; +static struct files_struct init_files = INIT_FILES; +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct mm_struct init_mm = INIT_MM(init_mm); + +EXPORT_SYMBOL(init_mm); + +/* + * Initial thread structure. + * + * We need to make sure that this is THREAD_SIZE aligned due to the + * way process stacks are handled. This is done by having a special + * "init_task" linker map entry.. + */ +union thread_union init_thread_union + __attribute__((__section__(".data.init_task"))) = + { INIT_THREAD_INFO(init_task) }; + +/* + * Initial task structure. + * + * All other task structs will be allocated on slabs in fork.c + */ +struct task_struct init_task = INIT_TASK(init_task); + +EXPORT_SYMBOL(init_task); + +/* + * per-CPU TSS segments. Threads are completely 'soft' on Linux, + * no more per-task TSS's. + */ +DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss) = INIT_TSS; + diff --git a/arch/x86/kernel/init_task_64.c b/arch/x86/kernel/init_task_64.c new file mode 100644 index 000000000000..4ff33d4f8551 --- /dev/null +++ b/arch/x86/kernel/init_task_64.c @@ -0,0 +1,54 @@ +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/init_task.h> +#include <linux/fs.h> +#include <linux/mqueue.h> + +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/desc.h> + +static struct fs_struct init_fs = INIT_FS; +static struct files_struct init_files = INIT_FILES; +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct mm_struct init_mm = INIT_MM(init_mm); + +EXPORT_SYMBOL(init_mm); + +/* + * Initial task structure. + * + * We need to make sure that this is 8192-byte aligned due to the + * way process stacks are handled. This is done by having a special + * "init_task" linker map entry.. + */ +union thread_union init_thread_union + __attribute__((__section__(".data.init_task"))) = + { INIT_THREAD_INFO(init_task) }; + +/* + * Initial task structure. + * + * All other task structs will be allocated on slabs in fork.c + */ +struct task_struct init_task = INIT_TASK(init_task); + +EXPORT_SYMBOL(init_task); +/* + * per-CPU TSS segments. Threads are completely 'soft' on Linux, + * no more per-task TSS's. The TSS size is kept cacheline-aligned + * so they are allowed to end up in the .data.cacheline_aligned + * section. Since TSS's are completely CPU-local, we want them + * on exact cacheline boundaries, to eliminate cacheline ping-pong. + */ +DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss) = INIT_TSS; + +/* Copies of the original ist values from the tss are only accessed during + * debugging, no special alignment required. + */ +DEFINE_PER_CPU(struct orig_ist, orig_ist); + +#define ALIGN_TO_4K __attribute__((section(".data.init_task"))) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c new file mode 100644 index 000000000000..e2f4a1c68547 --- /dev/null +++ b/arch/x86/kernel/io_apic_32.c @@ -0,0 +1,2847 @@ +/* + * Intel IO-APIC support for multi-Pentium hosts. + * + * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo + * + * Many thanks to Stig Venaas for trying out countless experimental + * patches and reporting/debugging problems patiently! + * + * (c) 1999, Multiple IO-APIC support, developed by + * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and + * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, + * further tested and cleaned up by Zach Brown <zab@redhat.com> + * and Ingo Molnar <mingo@redhat.com> + * + * Fixes + * Maciej W. Rozycki : Bits for genuine 82489DX APICs; + * thanks to Eric Gilmore + * and Rolf G. Tews + * for testing these extensively + * Paul Diefenbaugh : Added full ACPI support + */ + +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/mc146818rtc.h> +#include <linux/compiler.h> +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/sysdev.h> +#include <linux/pci.h> +#include <linux/msi.h> +#include <linux/htirq.h> +#include <linux/freezer.h> +#include <linux/kthread.h> + +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/desc.h> +#include <asm/timer.h> +#include <asm/i8259.h> +#include <asm/nmi.h> +#include <asm/msidef.h> +#include <asm/hypertransport.h> + +#include <mach_apic.h> +#include <mach_apicdef.h> + +#include "io_ports.h" + +int (*ioapic_renumber_irq)(int ioapic, int irq); +atomic_t irq_mis_count; + +/* Where if anywhere is the i8259 connect in external int mode */ +static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; + +static DEFINE_SPINLOCK(ioapic_lock); +static DEFINE_SPINLOCK(vector_lock); + +int timer_over_8254 __initdata = 1; + +/* + * Is the SiS APIC rmw bug present ? + * -1 = don't know, 0 = no, 1 = yes + */ +int sis_apic_bug = -1; + +/* + * # of IRQ routing registers + */ +int nr_ioapic_registers[MAX_IO_APICS]; + +static int disable_timer_pin_1 __initdata; + +/* + * Rough estimation of how many shared IRQs there are, can + * be changed anytime. + */ +#define MAX_PLUS_SHARED_IRQS NR_IRQS +#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) + +/* + * This is performance-critical, we want to do it O(1) + * + * the indexing order of this array favors 1:1 mappings + * between pins and IRQs. + */ + +static struct irq_pin_list { + int apic, pin, next; +} irq_2_pin[PIN_MAP_SIZE]; + +struct io_apic { + unsigned int index; + unsigned int unused[3]; + unsigned int data; +}; + +static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) +{ + return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) + + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); +} + +static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + return readl(&io_apic->data); +} + +static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + +/* + * Re-write a value: to be used for read-modify-write + * cycles where the read already set up the index register. + * + * Older SiS APIC requires we rewrite the index register + */ +static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value) +{ + volatile struct io_apic __iomem *io_apic = io_apic_base(apic); + if (sis_apic_bug) + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + +union entry_union { + struct { u32 w1, w2; }; + struct IO_APIC_route_entry entry; +}; + +static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) +{ + union entry_union eu; + unsigned long flags; + spin_lock_irqsave(&ioapic_lock, flags); + eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); + eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + return eu.entry; +} + +/* + * When we write a new IO APIC routing entry, we need to write the high + * word first! If the mask bit in the low word is clear, we will enable + * the interrupt, and we need to make sure the entry is fully populated + * before that happens. + */ +static void +__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + union entry_union eu; + eu.entry = e; + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); +} + +static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + unsigned long flags; + spin_lock_irqsave(&ioapic_lock, flags); + __ioapic_write_entry(apic, pin, e); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * When we mask an IO APIC routing entry, we need to write the low + * word first, in order to set the mask bit before we change the + * high bits! + */ +static void ioapic_mask_entry(int apic, int pin) +{ + unsigned long flags; + union entry_union eu = { .entry.mask = 1 }; + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * The common case is 1:1 IRQ<->pin mappings. Sometimes there are + * shared ISA-space IRQs, so we have to support them. We are super + * fast in the common case, and fast for shared ISA-space IRQs. + */ +static void add_pin_to_irq(unsigned int irq, int apic, int pin) +{ + static int first_free_entry = NR_IRQS; + struct irq_pin_list *entry = irq_2_pin + irq; + + while (entry->next) + entry = irq_2_pin + entry->next; + + if (entry->pin != -1) { + entry->next = first_free_entry; + entry = irq_2_pin + entry->next; + if (++first_free_entry >= PIN_MAP_SIZE) + panic("io_apic.c: whoops"); + } + entry->apic = apic; + entry->pin = pin; +} + +/* + * Reroute an IRQ to a different pin. + */ +static void __init replace_pin_at_irq(unsigned int irq, + int oldapic, int oldpin, + int newapic, int newpin) +{ + struct irq_pin_list *entry = irq_2_pin + irq; + + while (1) { + if (entry->apic == oldapic && entry->pin == oldpin) { + entry->apic = newapic; + entry->pin = newpin; + } + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } +} + +static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) +{ + struct irq_pin_list *entry = irq_2_pin + irq; + unsigned int pin, reg; + + for (;;) { + pin = entry->pin; + if (pin == -1) + break; + reg = io_apic_read(entry->apic, 0x10 + pin*2); + reg &= ~disable; + reg |= enable; + io_apic_modify(entry->apic, 0x10 + pin*2, reg); + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } +} + +/* mask = 1 */ +static void __mask_IO_APIC_irq (unsigned int irq) +{ + __modify_IO_APIC_irq(irq, 0x00010000, 0); +} + +/* mask = 0 */ +static void __unmask_IO_APIC_irq (unsigned int irq) +{ + __modify_IO_APIC_irq(irq, 0, 0x00010000); +} + +/* mask = 1, trigger = 0 */ +static void __mask_and_edge_IO_APIC_irq (unsigned int irq) +{ + __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); +} + +/* mask = 0, trigger = 1 */ +static void __unmask_and_level_IO_APIC_irq (unsigned int irq) +{ + __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); +} + +static void mask_IO_APIC_irq (unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + __mask_IO_APIC_irq(irq); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void unmask_IO_APIC_irq (unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + __unmask_IO_APIC_irq(irq); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) +{ + struct IO_APIC_route_entry entry; + + /* Check delivery_mode to be sure we're not clearing an SMI pin */ + entry = ioapic_read_entry(apic, pin); + if (entry.delivery_mode == dest_SMI) + return; + + /* + * Disable it in the IO-APIC irq-routing table: + */ + ioapic_mask_entry(apic, pin); +} + +static void clear_IO_APIC (void) +{ + int apic, pin; + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) + clear_IO_APIC_pin(apic, pin); +} + +#ifdef CONFIG_SMP +static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) +{ + unsigned long flags; + int pin; + struct irq_pin_list *entry = irq_2_pin + irq; + unsigned int apicid_value; + cpumask_t tmp; + + cpus_and(tmp, cpumask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(cpumask, tmp, CPU_MASK_ALL); + + apicid_value = cpu_mask_to_apicid(cpumask); + /* Prepare to do the io_apic_write */ + apicid_value = apicid_value << 24; + spin_lock_irqsave(&ioapic_lock, flags); + for (;;) { + pin = entry->pin; + if (pin == -1) + break; + io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value); + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } + irq_desc[irq].affinity = cpumask; + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +#if defined(CONFIG_IRQBALANCE) +# include <asm/processor.h> /* kernel_thread() */ +# include <linux/kernel_stat.h> /* kstat */ +# include <linux/slab.h> /* kmalloc() */ +# include <linux/timer.h> /* time_after() */ + +#define IRQBALANCE_CHECK_ARCH -999 +#define MAX_BALANCED_IRQ_INTERVAL (5*HZ) +#define MIN_BALANCED_IRQ_INTERVAL (HZ/2) +#define BALANCED_IRQ_MORE_DELTA (HZ/10) +#define BALANCED_IRQ_LESS_DELTA (HZ) + +static int irqbalance_disabled __read_mostly = IRQBALANCE_CHECK_ARCH; +static int physical_balance __read_mostly; +static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL; + +static struct irq_cpu_info { + unsigned long * last_irq; + unsigned long * irq_delta; + unsigned long irq; +} irq_cpu_data[NR_CPUS]; + +#define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) +#define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) +#define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) + +#define IDLE_ENOUGH(cpu,now) \ + (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) + +#define IRQ_ALLOWED(cpu, allowed_mask) cpu_isset(cpu, allowed_mask) + +#define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i])) + +static cpumask_t balance_irq_affinity[NR_IRQS] = { + [0 ... NR_IRQS-1] = CPU_MASK_ALL +}; + +void set_balance_irq_affinity(unsigned int irq, cpumask_t mask) +{ + balance_irq_affinity[irq] = mask; +} + +static unsigned long move(int curr_cpu, cpumask_t allowed_mask, + unsigned long now, int direction) +{ + int search_idle = 1; + int cpu = curr_cpu; + + goto inside; + + do { + if (unlikely(cpu == curr_cpu)) + search_idle = 0; +inside: + if (direction == 1) { + cpu++; + if (cpu >= NR_CPUS) + cpu = 0; + } else { + cpu--; + if (cpu == -1) + cpu = NR_CPUS-1; + } + } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || + (search_idle && !IDLE_ENOUGH(cpu,now))); + + return cpu; +} + +static inline void balance_irq(int cpu, int irq) +{ + unsigned long now = jiffies; + cpumask_t allowed_mask; + unsigned int new_cpu; + + if (irqbalance_disabled) + return; + + cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]); + new_cpu = move(cpu, allowed_mask, now, 1); + if (cpu != new_cpu) { + set_pending_irq(irq, cpumask_of_cpu(new_cpu)); + } +} + +static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) +{ + int i, j; + + for_each_online_cpu(i) { + for (j = 0; j < NR_IRQS; j++) { + if (!irq_desc[j].action) + continue; + /* Is it a significant load ? */ + if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < + useful_load_threshold) + continue; + balance_irq(i, j); + } + } + balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + return; +} + +static void do_irq_balance(void) +{ + int i, j; + unsigned long max_cpu_irq = 0, min_cpu_irq = (~0); + unsigned long move_this_load = 0; + int max_loaded = 0, min_loaded = 0; + int load; + unsigned long useful_load_threshold = balanced_irq_interval + 10; + int selected_irq; + int tmp_loaded, first_attempt = 1; + unsigned long tmp_cpu_irq; + unsigned long imbalance = 0; + cpumask_t allowed_mask, target_cpu_mask, tmp; + + for_each_possible_cpu(i) { + int package_index; + CPU_IRQ(i) = 0; + if (!cpu_online(i)) + continue; + package_index = CPU_TO_PACKAGEINDEX(i); + for (j = 0; j < NR_IRQS; j++) { + unsigned long value_now, delta; + /* Is this an active IRQ or balancing disabled ? */ + if (!irq_desc[j].action || irq_balancing_disabled(j)) + continue; + if ( package_index == i ) + IRQ_DELTA(package_index,j) = 0; + /* Determine the total count per processor per IRQ */ + value_now = (unsigned long) kstat_cpu(i).irqs[j]; + + /* Determine the activity per processor per IRQ */ + delta = value_now - LAST_CPU_IRQ(i,j); + + /* Update last_cpu_irq[][] for the next time */ + LAST_CPU_IRQ(i,j) = value_now; + + /* Ignore IRQs whose rate is less than the clock */ + if (delta < useful_load_threshold) + continue; + /* update the load for the processor or package total */ + IRQ_DELTA(package_index,j) += delta; + + /* Keep track of the higher numbered sibling as well */ + if (i != package_index) + CPU_IRQ(i) += delta; + /* + * We have sibling A and sibling B in the package + * + * cpu_irq[A] = load for cpu A + load for cpu B + * cpu_irq[B] = load for cpu B + */ + CPU_IRQ(package_index) += delta; + } + } + /* Find the least loaded processor package */ + for_each_online_cpu(i) { + if (i != CPU_TO_PACKAGEINDEX(i)) + continue; + if (min_cpu_irq > CPU_IRQ(i)) { + min_cpu_irq = CPU_IRQ(i); + min_loaded = i; + } + } + max_cpu_irq = ULONG_MAX; + +tryanothercpu: + /* Look for heaviest loaded processor. + * We may come back to get the next heaviest loaded processor. + * Skip processors with trivial loads. + */ + tmp_cpu_irq = 0; + tmp_loaded = -1; + for_each_online_cpu(i) { + if (i != CPU_TO_PACKAGEINDEX(i)) + continue; + if (max_cpu_irq <= CPU_IRQ(i)) + continue; + if (tmp_cpu_irq < CPU_IRQ(i)) { + tmp_cpu_irq = CPU_IRQ(i); + tmp_loaded = i; + } + } + + if (tmp_loaded == -1) { + /* In the case of small number of heavy interrupt sources, + * loading some of the cpus too much. We use Ingo's original + * approach to rotate them around. + */ + if (!first_attempt && imbalance >= useful_load_threshold) { + rotate_irqs_among_cpus(useful_load_threshold); + return; + } + goto not_worth_the_effort; + } + + first_attempt = 0; /* heaviest search */ + max_cpu_irq = tmp_cpu_irq; /* load */ + max_loaded = tmp_loaded; /* processor */ + imbalance = (max_cpu_irq - min_cpu_irq) / 2; + + /* if imbalance is less than approx 10% of max load, then + * observe diminishing returns action. - quit + */ + if (imbalance < (max_cpu_irq >> 3)) + goto not_worth_the_effort; + +tryanotherirq: + /* if we select an IRQ to move that can't go where we want, then + * see if there is another one to try. + */ + move_this_load = 0; + selected_irq = -1; + for (j = 0; j < NR_IRQS; j++) { + /* Is this an active IRQ? */ + if (!irq_desc[j].action) + continue; + if (imbalance <= IRQ_DELTA(max_loaded,j)) + continue; + /* Try to find the IRQ that is closest to the imbalance + * without going over. + */ + if (move_this_load < IRQ_DELTA(max_loaded,j)) { + move_this_load = IRQ_DELTA(max_loaded,j); + selected_irq = j; + } + } + if (selected_irq == -1) { + goto tryanothercpu; + } + + imbalance = move_this_load; + + /* For physical_balance case, we accumlated both load + * values in the one of the siblings cpu_irq[], + * to use the same code for physical and logical processors + * as much as possible. + * + * NOTE: the cpu_irq[] array holds the sum of the load for + * sibling A and sibling B in the slot for the lowest numbered + * sibling (A), _AND_ the load for sibling B in the slot for + * the higher numbered sibling. + * + * We seek the least loaded sibling by making the comparison + * (A+B)/2 vs B + */ + load = CPU_IRQ(min_loaded) >> 1; + for_each_cpu_mask(j, cpu_sibling_map[min_loaded]) { + if (load > CPU_IRQ(j)) { + /* This won't change cpu_sibling_map[min_loaded] */ + load = CPU_IRQ(j); + min_loaded = j; + } + } + + cpus_and(allowed_mask, + cpu_online_map, + balance_irq_affinity[selected_irq]); + target_cpu_mask = cpumask_of_cpu(min_loaded); + cpus_and(tmp, target_cpu_mask, allowed_mask); + + if (!cpus_empty(tmp)) { + /* mark for change destination */ + set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); + + /* Since we made a change, come back sooner to + * check for more variation. + */ + balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + return; + } + goto tryanotherirq; + +not_worth_the_effort: + /* + * if we did not find an IRQ to move, then adjust the time interval + * upward + */ + balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, + balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); + return; +} + +static int balanced_irq(void *unused) +{ + int i; + unsigned long prev_balance_time = jiffies; + long time_remaining = balanced_irq_interval; + + /* push everything to CPU 0 to give us a starting point. */ + for (i = 0 ; i < NR_IRQS ; i++) { + irq_desc[i].pending_mask = cpumask_of_cpu(0); + set_pending_irq(i, cpumask_of_cpu(0)); + } + + set_freezable(); + for ( ; ; ) { + time_remaining = schedule_timeout_interruptible(time_remaining); + try_to_freeze(); + if (time_after(jiffies, + prev_balance_time+balanced_irq_interval)) { + preempt_disable(); + do_irq_balance(); + prev_balance_time = jiffies; + time_remaining = balanced_irq_interval; + preempt_enable(); + } + } + return 0; +} + +static int __init balanced_irq_init(void) +{ + int i; + struct cpuinfo_x86 *c; + cpumask_t tmp; + + cpus_shift_right(tmp, cpu_online_map, 2); + c = &boot_cpu_data; + /* When not overwritten by the command line ask subarchitecture. */ + if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) + irqbalance_disabled = NO_BALANCE_IRQ; + if (irqbalance_disabled) + return 0; + + /* disable irqbalance completely if there is only one processor online */ + if (num_online_cpus() < 2) { + irqbalance_disabled = 1; + return 0; + } + /* + * Enable physical balance only if more than 1 physical processor + * is present + */ + if (smp_num_siblings > 1 && !cpus_empty(tmp)) + physical_balance = 1; + + for_each_online_cpu(i) { + irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { + printk(KERN_ERR "balanced_irq_init: out of memory"); + goto failed; + } + memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); + memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); + } + + printk(KERN_INFO "Starting balanced_irq\n"); + if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd"))) + return 0; + printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq"); +failed: + for_each_possible_cpu(i) { + kfree(irq_cpu_data[i].irq_delta); + irq_cpu_data[i].irq_delta = NULL; + kfree(irq_cpu_data[i].last_irq); + irq_cpu_data[i].last_irq = NULL; + } + return 0; +} + +int __devinit irqbalance_disable(char *str) +{ + irqbalance_disabled = 1; + return 1; +} + +__setup("noirqbalance", irqbalance_disable); + +late_initcall(balanced_irq_init); +#endif /* CONFIG_IRQBALANCE */ +#endif /* CONFIG_SMP */ + +#ifndef CONFIG_SMP +void fastcall send_IPI_self(int vector) +{ + unsigned int cfg; + + /* + * Wait for idle. + */ + apic_wait_icr_idle(); + cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL; + /* + * Send the IPI. The write to APIC_ICR fires this off. + */ + apic_write_around(APIC_ICR, cfg); +} +#endif /* !CONFIG_SMP */ + + +/* + * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to + * specific CPU-side IRQs. + */ + +#define MAX_PIRQS 8 +static int pirq_entries [MAX_PIRQS]; +static int pirqs_enabled; +int skip_ioapic_setup; + +static int __init ioapic_pirq_setup(char *str) +{ + int i, max; + int ints[MAX_PIRQS+1]; + + get_options(str, ARRAY_SIZE(ints), ints); + + for (i = 0; i < MAX_PIRQS; i++) + pirq_entries[i] = -1; + + pirqs_enabled = 1; + apic_printk(APIC_VERBOSE, KERN_INFO + "PIRQ redirection, working around broken MP-BIOS.\n"); + max = MAX_PIRQS; + if (ints[0] < MAX_PIRQS) + max = ints[0]; + + for (i = 0; i < max; i++) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); + /* + * PIRQs are mapped upside down, usually. + */ + pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; + } + return 1; +} + +__setup("pirq=", ioapic_pirq_setup); + +/* + * Find the IRQ entry number of a certain pin. + */ +static int find_irq_entry(int apic, int pin, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].mpc_irqtype == type && + (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || + mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && + mp_irqs[i].mpc_dstirq == pin) + return i; + + return -1; +} + +/* + * Find the pin to which IRQ[irq] (ISA) is connected + */ +static int __init find_isa_irq_pin(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || + mp_bus_id_to_type[lbus] == MP_BUS_EISA || + mp_bus_id_to_type[lbus] == MP_BUS_MCA + ) && + (mp_irqs[i].mpc_irqtype == type) && + (mp_irqs[i].mpc_srcbusirq == irq)) + + return mp_irqs[i].mpc_dstirq; + } + return -1; +} + +static int __init find_isa_irq_apic(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || + mp_bus_id_to_type[lbus] == MP_BUS_EISA || + mp_bus_id_to_type[lbus] == MP_BUS_MCA + ) && + (mp_irqs[i].mpc_irqtype == type) && + (mp_irqs[i].mpc_srcbusirq == irq)) + break; + } + if (i < mp_irq_entries) { + int apic; + for(apic = 0; apic < nr_ioapics; apic++) { + if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + return apic; + } + } + + return -1; +} + +/* + * Find a specific PCI IRQ entry. + * Not an __init, possibly needed by modules + */ +static int pin_2_irq(int idx, int apic, int pin); + +int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) +{ + int apic, i, best_guess = -1; + + apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, " + "slot:%d, pin:%d.\n", bus, slot, pin); + if (mp_bus_id_to_pci_bus[bus] == -1) { + printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus); + return -1; + } + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + for (apic = 0; apic < nr_ioapics; apic++) + if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || + mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + break; + + if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) && + !mp_irqs[i].mpc_irqtype && + (bus == lbus) && + (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + + if (!(apic || IO_APIC_IRQ(irq))) + continue; + + if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + return irq; + /* + * Use the first all-but-pin matching entry as a + * best-guess fuzzy result for broken mptables. + */ + if (best_guess < 0) + best_guess = irq; + } + } + return best_guess; +} +EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); + +/* + * This function currently is only a helper for the i386 smp boot process where + * we need to reprogram the ioredtbls to cater for the cpus which have come online + * so mask in all cases should simply be TARGET_CPUS + */ +#ifdef CONFIG_SMP +void __init setup_ioapic_dest(void) +{ + int pin, ioapic, irq, irq_entry; + + if (skip_ioapic_setup == 1) + return; + + for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { + for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { + irq_entry = find_irq_entry(ioapic, pin, mp_INT); + if (irq_entry == -1) + continue; + irq = pin_2_irq(irq_entry, ioapic, pin); + set_ioapic_affinity_irq(irq, TARGET_CPUS); + } + + } +} +#endif + +/* + * EISA Edge/Level control register, ELCR + */ +static int EISA_ELCR(unsigned int irq) +{ + if (irq < 16) { + unsigned int port = 0x4d0 + (irq >> 3); + return (inb(port) >> (irq & 7)) & 1; + } + apic_printk(APIC_VERBOSE, KERN_INFO + "Broken MPtable reports ISA irq %d\n", irq); + return 0; +} + +/* EISA interrupts are always polarity zero and can be edge or level + * trigger depending on the ELCR value. If an interrupt is listed as + * EISA conforming in the MP table, that means its trigger type must + * be read in from the ELCR */ + +#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) +#define default_EISA_polarity(idx) (0) + +/* ISA interrupts are always polarity zero edge triggered, + * when listed as conforming in the MP table. */ + +#define default_ISA_trigger(idx) (0) +#define default_ISA_polarity(idx) (0) + +/* PCI interrupts are always polarity one level triggered, + * when listed as conforming in the MP table. */ + +#define default_PCI_trigger(idx) (1) +#define default_PCI_polarity(idx) (1) + +/* MCA interrupts are always polarity zero level triggered, + * when listed as conforming in the MP table. */ + +#define default_MCA_trigger(idx) (1) +#define default_MCA_polarity(idx) (0) + +static int __init MPBIOS_polarity(int idx) +{ + int bus = mp_irqs[idx].mpc_srcbus; + int polarity; + + /* + * Determine IRQ line polarity (high active or low active): + */ + switch (mp_irqs[idx].mpc_irqflag & 3) + { + case 0: /* conforms, ie. bus-type dependent polarity */ + { + switch (mp_bus_id_to_type[bus]) + { + case MP_BUS_ISA: /* ISA pin */ + { + polarity = default_ISA_polarity(idx); + break; + } + case MP_BUS_EISA: /* EISA pin */ + { + polarity = default_EISA_polarity(idx); + break; + } + case MP_BUS_PCI: /* PCI pin */ + { + polarity = default_PCI_polarity(idx); + break; + } + case MP_BUS_MCA: /* MCA pin */ + { + polarity = default_MCA_polarity(idx); + break; + } + default: + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + } + break; + } + case 1: /* high active */ + { + polarity = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + case 3: /* low active */ + { + polarity = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + } + return polarity; +} + +static int MPBIOS_trigger(int idx) +{ + int bus = mp_irqs[idx].mpc_srcbus; + int trigger; + + /* + * Determine IRQ trigger mode (edge or level sensitive): + */ + switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + { + case 0: /* conforms, ie. bus-type dependent */ + { + switch (mp_bus_id_to_type[bus]) + { + case MP_BUS_ISA: /* ISA pin */ + { + trigger = default_ISA_trigger(idx); + break; + } + case MP_BUS_EISA: /* EISA pin */ + { + trigger = default_EISA_trigger(idx); + break; + } + case MP_BUS_PCI: /* PCI pin */ + { + trigger = default_PCI_trigger(idx); + break; + } + case MP_BUS_MCA: /* MCA pin */ + { + trigger = default_MCA_trigger(idx); + break; + } + default: + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + } + break; + } + case 1: /* edge */ + { + trigger = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + case 3: /* level */ + { + trigger = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 0; + break; + } + } + return trigger; +} + +static inline int irq_polarity(int idx) +{ + return MPBIOS_polarity(idx); +} + +static inline int irq_trigger(int idx) +{ + return MPBIOS_trigger(idx); +} + +static int pin_2_irq(int idx, int apic, int pin) +{ + int irq, i; + int bus = mp_irqs[idx].mpc_srcbus; + + /* + * Debugging check, we are in big trouble if this message pops up! + */ + if (mp_irqs[idx].mpc_dstirq != pin) + printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); + + switch (mp_bus_id_to_type[bus]) + { + case MP_BUS_ISA: /* ISA pin */ + case MP_BUS_EISA: + case MP_BUS_MCA: + { + irq = mp_irqs[idx].mpc_srcbusirq; + break; + } + case MP_BUS_PCI: /* PCI pin */ + { + /* + * PCI IRQs are mapped in order + */ + i = irq = 0; + while (i < apic) + irq += nr_ioapic_registers[i++]; + irq += pin; + + /* + * For MPS mode, so far only needed by ES7000 platform + */ + if (ioapic_renumber_irq) + irq = ioapic_renumber_irq(apic, irq); + + break; + } + default: + { + printk(KERN_ERR "unknown bus type %d.\n",bus); + irq = 0; + break; + } + } + + /* + * PCI IRQ command line redirection. Yes, limits are hardcoded. + */ + if ((pin >= 16) && (pin <= 23)) { + if (pirq_entries[pin-16] != -1) { + if (!pirq_entries[pin-16]) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + "disabling PIRQ%d\n", pin-16); + } else { + irq = pirq_entries[pin-16]; + apic_printk(APIC_VERBOSE, KERN_DEBUG + "using PIRQ%d -> IRQ %d\n", + pin-16, irq); + } + } + } + return irq; +} + +static inline int IO_APIC_irq_trigger(int irq) +{ + int apic, idx, pin; + + for (apic = 0; apic < nr_ioapics; apic++) { + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + idx = find_irq_entry(apic,pin,mp_INT); + if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) + return irq_trigger(idx); + } + } + /* + * nonexistent IRQs are edge default + */ + return 0; +} + +/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ +static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; + +static int __assign_irq_vector(int irq) +{ + static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; + int vector, offset, i; + + BUG_ON((unsigned)irq >= NR_IRQ_VECTORS); + + if (irq_vector[irq] > 0) + return irq_vector[irq]; + + vector = current_vector; + offset = current_offset; +next: + vector += 8; + if (vector >= FIRST_SYSTEM_VECTOR) { + offset = (offset + 1) % 8; + vector = FIRST_DEVICE_VECTOR + offset; + } + if (vector == current_vector) + return -ENOSPC; + if (vector == SYSCALL_VECTOR) + goto next; + for (i = 0; i < NR_IRQ_VECTORS; i++) + if (irq_vector[i] == vector) + goto next; + + current_vector = vector; + current_offset = offset; + irq_vector[irq] = vector; + + return vector; +} + +static int assign_irq_vector(int irq) +{ + unsigned long flags; + int vector; + + spin_lock_irqsave(&vector_lock, flags); + vector = __assign_irq_vector(irq); + spin_unlock_irqrestore(&vector_lock, flags); + + return vector; +} +static struct irq_chip ioapic_chip; + +#define IOAPIC_AUTO -1 +#define IOAPIC_EDGE 0 +#define IOAPIC_LEVEL 1 + +static void ioapic_register_intr(int irq, int vector, unsigned long trigger) +{ + if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || + trigger == IOAPIC_LEVEL) { + irq_desc[irq].status |= IRQ_LEVEL; + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_fasteoi_irq, "fasteoi"); + } else { + irq_desc[irq].status &= ~IRQ_LEVEL; + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_edge_irq, "edge"); + } + set_intr_gate(vector, interrupt[irq]); +} + +static void __init setup_IO_APIC_irqs(void) +{ + struct IO_APIC_route_entry entry; + int apic, pin, idx, irq, first_notcon = 1, vector; + unsigned long flags; + + apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); + + for (apic = 0; apic < nr_ioapics; apic++) { + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + + /* + * add it to the IO-APIC irq-routing table: + */ + memset(&entry,0,sizeof(entry)); + + entry.delivery_mode = INT_DELIVERY_MODE; + entry.dest_mode = INT_DEST_MODE; + entry.mask = 0; /* enable IRQ */ + entry.dest.logical.logical_dest = + cpu_mask_to_apicid(TARGET_CPUS); + + idx = find_irq_entry(apic,pin,mp_INT); + if (idx == -1) { + if (first_notcon) { + apic_printk(APIC_VERBOSE, KERN_DEBUG + " IO-APIC (apicid-pin) %d-%d", + mp_ioapics[apic].mpc_apicid, + pin); + first_notcon = 0; + } else + apic_printk(APIC_VERBOSE, ", %d-%d", + mp_ioapics[apic].mpc_apicid, pin); + continue; + } + + entry.trigger = irq_trigger(idx); + entry.polarity = irq_polarity(idx); + + if (irq_trigger(idx)) { + entry.trigger = 1; + entry.mask = 1; + } + + irq = pin_2_irq(idx, apic, pin); + /* + * skip adding the timer int on secondary nodes, which causes + * a small but painful rift in the time-space continuum + */ + if (multi_timer_check(apic, irq)) + continue; + else + add_pin_to_irq(irq, apic, pin); + + if (!apic && !IO_APIC_IRQ(irq)) + continue; + + if (IO_APIC_IRQ(irq)) { + vector = assign_irq_vector(irq); + entry.vector = vector; + ioapic_register_intr(irq, vector, IOAPIC_AUTO); + + if (!apic && (irq < 16)) + disable_8259A_irq(irq); + } + spin_lock_irqsave(&ioapic_lock, flags); + __ioapic_write_entry(apic, pin, entry); + spin_unlock_irqrestore(&ioapic_lock, flags); + } + } + + if (!first_notcon) + apic_printk(APIC_VERBOSE, " not connected.\n"); +} + +/* + * Set up the 8259A-master output pin: + */ +static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +{ + struct IO_APIC_route_entry entry; + + memset(&entry,0,sizeof(entry)); + + disable_8259A_irq(0); + + /* mask LVT0 */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + + /* + * We use logical delivery to get the timer IRQ + * to the first CPU. + */ + entry.dest_mode = INT_DEST_MODE; + entry.mask = 0; /* unmask IRQ now */ + entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.delivery_mode = INT_DELIVERY_MODE; + entry.polarity = 0; + entry.trigger = 0; + entry.vector = vector; + + /* + * The timer IRQ doesn't have to know that behind the + * scene we have a 8259A-master in AEOI mode ... + */ + irq_desc[0].chip = &ioapic_chip; + set_irq_handler(0, handle_edge_irq); + + /* + * Add it to the IO-APIC irq-routing table: + */ + ioapic_write_entry(apic, pin, entry); + + enable_8259A_irq(0); +} + +void __init print_IO_APIC(void) +{ + int apic, i; + union IO_APIC_reg_00 reg_00; + union IO_APIC_reg_01 reg_01; + union IO_APIC_reg_02 reg_02; + union IO_APIC_reg_03 reg_03; + unsigned long flags; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + for (i = 0; i < nr_ioapics; i++) + printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", + mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + + /* + * We are a bit conservative about what we expect. We have to + * know about every hardware change ASAP. + */ + printk(KERN_INFO "testing the IO APIC.......................\n"); + + for (apic = 0; apic < nr_ioapics; apic++) { + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(apic, 0); + reg_01.raw = io_apic_read(apic, 1); + if (reg_01.bits.version >= 0x10) + reg_02.raw = io_apic_read(apic, 2); + if (reg_01.bits.version >= 0x20) + reg_03.raw = io_apic_read(apic, 3); + spin_unlock_irqrestore(&ioapic_lock, flags); + + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); + printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); + printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); + printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); + + printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw); + printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); + + printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); + printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); + + /* + * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, + * but the value of reg_02 is read as the previous read register + * value, so ignore it if reg_02 == reg_01. + */ + if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { + printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); + printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); + } + + /* + * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 + * or reg_03, but the value of reg_0[23] is read as the previous read + * register value, so ignore it if reg_03 == reg_0[12]. + */ + if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && + reg_03.raw != reg_01.raw) { + printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); + printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); + } + + printk(KERN_DEBUG ".... IRQ redirection table:\n"); + + printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" + " Stat Dest Deli Vect: \n"); + + for (i = 0; i <= reg_01.bits.entries; i++) { + struct IO_APIC_route_entry entry; + + entry = ioapic_read_entry(apic, i); + + printk(KERN_DEBUG " %02x %03X %02X ", + i, + entry.dest.logical.logical_dest, + entry.dest.physical.physical_dest + ); + + printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", + entry.mask, + entry.trigger, + entry.irr, + entry.polarity, + entry.delivery_status, + entry.dest_mode, + entry.delivery_mode, + entry.vector + ); + } + } + printk(KERN_DEBUG "IRQ to pin mappings:\n"); + for (i = 0; i < NR_IRQS; i++) { + struct irq_pin_list *entry = irq_2_pin + i; + if (entry->pin < 0) + continue; + printk(KERN_DEBUG "IRQ%d ", i); + for (;;) { + printk("-> %d:%d", entry->apic, entry->pin); + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } + printk("\n"); + } + + printk(KERN_INFO ".................................... done.\n"); + + return; +} + +#if 0 + +static void print_APIC_bitfield (int base) +{ + unsigned int v; + int i, j; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); + for (i = 0; i < 8; i++) { + v = apic_read(base + i*0x10); + for (j = 0; j < 32; j++) { + if (v & (1<<j)) + printk("1"); + else + printk("0"); + } + printk("\n"); + } +} + +void /*__init*/ print_local_APIC(void * dummy) +{ + unsigned int v, ver, maxlvt; + + if (apic_verbosity == APIC_QUIET) + return; + + printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", + smp_processor_id(), hard_smp_processor_id()); + v = apic_read(APIC_ID); + printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v)); + v = apic_read(APIC_LVR); + printk(KERN_INFO "... APIC VERSION: %08x\n", v); + ver = GET_APIC_VERSION(v); + maxlvt = lapic_get_maxlvt(); + + v = apic_read(APIC_TASKPRI); + printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); + + if (APIC_INTEGRATED(ver)) { /* !82489DX */ + v = apic_read(APIC_ARBPRI); + printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, + v & APIC_ARBPRI_MASK); + v = apic_read(APIC_PROCPRI); + printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); + } + + v = apic_read(APIC_EOI); + printk(KERN_DEBUG "... APIC EOI: %08x\n", v); + v = apic_read(APIC_RRR); + printk(KERN_DEBUG "... APIC RRR: %08x\n", v); + v = apic_read(APIC_LDR); + printk(KERN_DEBUG "... APIC LDR: %08x\n", v); + v = apic_read(APIC_DFR); + printk(KERN_DEBUG "... APIC DFR: %08x\n", v); + v = apic_read(APIC_SPIV); + printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); + + printk(KERN_DEBUG "... APIC ISR field:\n"); + print_APIC_bitfield(APIC_ISR); + printk(KERN_DEBUG "... APIC TMR field:\n"); + print_APIC_bitfield(APIC_TMR); + printk(KERN_DEBUG "... APIC IRR field:\n"); + print_APIC_bitfield(APIC_IRR); + + if (APIC_INTEGRATED(ver)) { /* !82489DX */ + if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); + v = apic_read(APIC_ESR); + printk(KERN_DEBUG "... APIC ESR: %08x\n", v); + } + + v = apic_read(APIC_ICR); + printk(KERN_DEBUG "... APIC ICR: %08x\n", v); + v = apic_read(APIC_ICR2); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); + + v = apic_read(APIC_LVTT); + printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); + + if (maxlvt > 3) { /* PC is LVT#4. */ + v = apic_read(APIC_LVTPC); + printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); + } + v = apic_read(APIC_LVT0); + printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); + v = apic_read(APIC_LVT1); + printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); + + if (maxlvt > 2) { /* ERR is LVT#3. */ + v = apic_read(APIC_LVTERR); + printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); + } + + v = apic_read(APIC_TMICT); + printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); + v = apic_read(APIC_TMCCT); + printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); + v = apic_read(APIC_TDCR); + printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); + printk("\n"); +} + +void print_all_local_APICs (void) +{ + on_each_cpu(print_local_APIC, NULL, 1, 1); +} + +void /*__init*/ print_PIC(void) +{ + unsigned int v; + unsigned long flags; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "\nprinting PIC contents\n"); + + spin_lock_irqsave(&i8259A_lock, flags); + + v = inb(0xa1) << 8 | inb(0x21); + printk(KERN_DEBUG "... PIC IMR: %04x\n", v); + + v = inb(0xa0) << 8 | inb(0x20); + printk(KERN_DEBUG "... PIC IRR: %04x\n", v); + + outb(0x0b,0xa0); + outb(0x0b,0x20); + v = inb(0xa0) << 8 | inb(0x20); + outb(0x0a,0xa0); + outb(0x0a,0x20); + + spin_unlock_irqrestore(&i8259A_lock, flags); + + printk(KERN_DEBUG "... PIC ISR: %04x\n", v); + + v = inb(0x4d1) << 8 | inb(0x4d0); + printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); +} + +#endif /* 0 */ + +static void __init enable_IO_APIC(void) +{ + union IO_APIC_reg_01 reg_01; + int i8259_apic, i8259_pin; + int i, apic; + unsigned long flags; + + for (i = 0; i < PIN_MAP_SIZE; i++) { + irq_2_pin[i].pin = -1; + irq_2_pin[i].next = 0; + } + if (!pirqs_enabled) + for (i = 0; i < MAX_PIRQS; i++) + pirq_entries[i] = -1; + + /* + * The number of IO-APIC IRQ registers (== #pins): + */ + for (apic = 0; apic < nr_ioapics; apic++) { + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(apic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + nr_ioapic_registers[apic] = reg_01.bits.entries+1; + } + for(apic = 0; apic < nr_ioapics; apic++) { + int pin; + /* See if any of the pins is in ExtINT mode */ + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + struct IO_APIC_route_entry entry; + entry = ioapic_read_entry(apic, pin); + + + /* If the interrupt line is enabled and in ExtInt mode + * I have found the pin where the i8259 is connected. + */ + if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { + ioapic_i8259.apic = apic; + ioapic_i8259.pin = pin; + goto found_i8259; + } + } + } + found_i8259: + /* Look to see what if the MP table has reported the ExtINT */ + /* If we could not find the appropriate pin by looking at the ioapic + * the i8259 probably is not connected the ioapic but give the + * mptable a chance anyway. + */ + i8259_pin = find_isa_irq_pin(0, mp_ExtINT); + i8259_apic = find_isa_irq_apic(0, mp_ExtINT); + /* Trust the MP table if nothing is setup in the hardware */ + if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { + printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); + ioapic_i8259.pin = i8259_pin; + ioapic_i8259.apic = i8259_apic; + } + /* Complain if the MP table and the hardware disagree */ + if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && + (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) + { + printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); + } + + /* + * Do not trust the IO-APIC being empty at bootup + */ + clear_IO_APIC(); +} + +/* + * Not an __init, needed by the reboot code + */ +void disable_IO_APIC(void) +{ + /* + * Clear the IO-APIC before rebooting: + */ + clear_IO_APIC(); + + /* + * If the i8259 is routed through an IOAPIC + * Put that IOAPIC in virtual wire mode + * so legacy interrupts can be delivered. + */ + if (ioapic_i8259.pin != -1) { + struct IO_APIC_route_entry entry; + + memset(&entry, 0, sizeof(entry)); + entry.mask = 0; /* Enabled */ + entry.trigger = 0; /* Edge */ + entry.irr = 0; + entry.polarity = 0; /* High */ + entry.delivery_status = 0; + entry.dest_mode = 0; /* Physical */ + entry.delivery_mode = dest_ExtINT; /* ExtInt */ + entry.vector = 0; + entry.dest.physical.physical_dest = + GET_APIC_ID(apic_read(APIC_ID)); + + /* + * Add it to the IO-APIC irq-routing table: + */ + ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); + } + disconnect_bsp_APIC(ioapic_i8259.pin != -1); +} + +/* + * function to set the IO-APIC physical IDs based on the + * values stored in the MPC table. + * + * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 + */ + +#ifndef CONFIG_X86_NUMAQ +static void __init setup_ioapic_ids_from_mpc(void) +{ + union IO_APIC_reg_00 reg_00; + physid_mask_t phys_id_present_map; + int apic; + int i; + unsigned char old_id; + unsigned long flags; + + /* + * Don't check I/O APIC IDs for xAPIC systems. They have + * no meaning without the serial APIC bus. + */ + if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return; + /* + * This is broken; anything with a real cpu count has to + * circumvent this idiocy regardless. + */ + phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map); + + /* + * Set the IOAPIC ID to the value stored in the MPC table. + */ + for (apic = 0; apic < nr_ioapics; apic++) { + + /* Read the register 0 value */ + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(apic, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + + old_id = mp_ioapics[apic].mpc_apicid; + + if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { + printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", + apic, mp_ioapics[apic].mpc_apicid); + printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", + reg_00.bits.ID); + mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; + } + + /* + * Sanity check, is the ID really free? Every APIC in a + * system must have a unique ID or we get lots of nice + * 'stuck on smp_invalidate_needed IPI wait' messages. + */ + if (check_apicid_used(phys_id_present_map, + mp_ioapics[apic].mpc_apicid)) { + printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", + apic, mp_ioapics[apic].mpc_apicid); + for (i = 0; i < get_physical_broadcast(); i++) + if (!physid_isset(i, phys_id_present_map)) + break; + if (i >= get_physical_broadcast()) + panic("Max APIC ID exceeded!\n"); + printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", + i); + physid_set(i, phys_id_present_map); + mp_ioapics[apic].mpc_apicid = i; + } else { + physid_mask_t tmp; + tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid); + apic_printk(APIC_VERBOSE, "Setting %d in the " + "phys_id_present_map\n", + mp_ioapics[apic].mpc_apicid); + physids_or(phys_id_present_map, phys_id_present_map, tmp); + } + + + /* + * We need to adjust the IRQ routing table + * if the ID changed. + */ + if (old_id != mp_ioapics[apic].mpc_apicid) + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].mpc_dstapic == old_id) + mp_irqs[i].mpc_dstapic + = mp_ioapics[apic].mpc_apicid; + + /* + * Read the right value from the MPC table and + * write it into the ID register. + */ + apic_printk(APIC_VERBOSE, KERN_INFO + "...changing IO-APIC physical APIC ID to %d ...", + mp_ioapics[apic].mpc_apicid); + + reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0, reg_00.raw); + spin_unlock_irqrestore(&ioapic_lock, flags); + + /* + * Sanity check + */ + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(apic, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) + printk("could not set ID!\n"); + else + apic_printk(APIC_VERBOSE, " ok.\n"); + } +} +#else +static void __init setup_ioapic_ids_from_mpc(void) { } +#endif + +int no_timer_check __initdata; + +static int __init notimercheck(char *s) +{ + no_timer_check = 1; + return 1; +} +__setup("no_timer_check", notimercheck); + +/* + * There is a nasty bug in some older SMP boards, their mptable lies + * about the timer IRQ. We do the following to work around the situation: + * + * - timer IRQ defaults to IO-APIC IRQ + * - if this function detects that timer IRQs are defunct, then we fall + * back to ISA timer IRQs + */ +static int __init timer_irq_works(void) +{ + unsigned long t1 = jiffies; + + if (no_timer_check) + return 1; + + local_irq_enable(); + /* Let ten ticks pass... */ + mdelay((10 * 1000) / HZ); + + /* + * Expect a few ticks at least, to be sure some possible + * glue logic does not lock up after one or two first + * ticks in a non-ExtINT mode. Also the local APIC + * might have cached one ExtINT interrupt. Finally, at + * least one tick may be lost due to delays. + */ + if (jiffies - t1 > 4) + return 1; + + return 0; +} + +/* + * In the SMP+IOAPIC case it might happen that there are an unspecified + * number of pending IRQ events unhandled. These cases are very rare, + * so we 'resend' these IRQs via IPIs, to the same CPU. It's much + * better to do it this way as thus we do not have to be aware of + * 'pending' interrupts in the IRQ path, except at this point. + */ +/* + * Edge triggered needs to resend any interrupt + * that was delayed but this is now handled in the device + * independent code. + */ + +/* + * Startup quirk: + * + * Starting up a edge-triggered IO-APIC interrupt is + * nasty - we need to make sure that we get the edge. + * If it is already asserted for some reason, we need + * return 1 to indicate that is was pending. + * + * This is not complete - we should be able to fake + * an edge even if it isn't on the 8259A... + * + * (We do this for level-triggered IRQs too - it cannot hurt.) + */ +static unsigned int startup_ioapic_irq(unsigned int irq) +{ + int was_pending = 0; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + if (irq < 16) { + disable_8259A_irq(irq); + if (i8259A_irq_pending(irq)) + was_pending = 1; + } + __unmask_IO_APIC_irq(irq); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return was_pending; +} + +static void ack_ioapic_irq(unsigned int irq) +{ + move_native_irq(irq); + ack_APIC_irq(); +} + +static void ack_ioapic_quirk_irq(unsigned int irq) +{ + unsigned long v; + int i; + + move_native_irq(irq); +/* + * It appears there is an erratum which affects at least version 0x11 + * of I/O APIC (that's the 82093AA and cores integrated into various + * chipsets). Under certain conditions a level-triggered interrupt is + * erroneously delivered as edge-triggered one but the respective IRR + * bit gets set nevertheless. As a result the I/O unit expects an EOI + * message but it will never arrive and further interrupts are blocked + * from the source. The exact reason is so far unknown, but the + * phenomenon was observed when two consecutive interrupt requests + * from a given source get delivered to the same CPU and the source is + * temporarily disabled in between. + * + * A workaround is to simulate an EOI message manually. We achieve it + * by setting the trigger mode to edge and then to level when the edge + * trigger mode gets detected in the TMR of a local APIC for a + * level-triggered interrupt. We mask the source for the time of the + * operation to prevent an edge-triggered interrupt escaping meanwhile. + * The idea is from Manfred Spraul. --macro + */ + i = irq_vector[irq]; + + v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); + + ack_APIC_irq(); + + if (!(v & (1 << (i & 0x1f)))) { + atomic_inc(&irq_mis_count); + spin_lock(&ioapic_lock); + __mask_and_edge_IO_APIC_irq(irq); + __unmask_and_level_IO_APIC_irq(irq); + spin_unlock(&ioapic_lock); + } +} + +static int ioapic_retrigger_irq(unsigned int irq) +{ + send_IPI_self(irq_vector[irq]); + + return 1; +} + +static struct irq_chip ioapic_chip __read_mostly = { + .name = "IO-APIC", + .startup = startup_ioapic_irq, + .mask = mask_IO_APIC_irq, + .unmask = unmask_IO_APIC_irq, + .ack = ack_ioapic_irq, + .eoi = ack_ioapic_quirk_irq, +#ifdef CONFIG_SMP + .set_affinity = set_ioapic_affinity_irq, +#endif + .retrigger = ioapic_retrigger_irq, +}; + + +static inline void init_IO_APIC_traps(void) +{ + int irq; + + /* + * NOTE! The local APIC isn't very good at handling + * multiple interrupts at the same interrupt level. + * As the interrupt level is determined by taking the + * vector number and shifting that right by 4, we + * want to spread these out a bit so that they don't + * all fall in the same interrupt level. + * + * Also, we've got to be careful not to trash gate + * 0x80, because int 0x80 is hm, kind of importantish. ;) + */ + for (irq = 0; irq < NR_IRQS ; irq++) { + int tmp = irq; + if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) { + /* + * Hmm.. We don't have an entry for this, + * so default to an old-fashioned 8259 + * interrupt if we can.. + */ + if (irq < 16) + make_8259A_irq(irq); + else + /* Strange. Oh, well.. */ + irq_desc[irq].chip = &no_irq_chip; + } + } +} + +/* + * The local APIC irq-chip implementation: + */ + +static void ack_apic(unsigned int irq) +{ + ack_APIC_irq(); +} + +static void mask_lapic_irq (unsigned int irq) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); +} + +static void unmask_lapic_irq (unsigned int irq) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED); +} + +static struct irq_chip lapic_chip __read_mostly = { + .name = "local-APIC-edge", + .mask = mask_lapic_irq, + .unmask = unmask_lapic_irq, + .eoi = ack_apic, +}; + +static void setup_nmi (void) +{ + /* + * Dirty trick to enable the NMI watchdog ... + * We put the 8259A master into AEOI mode and + * unmask on all local APICs LVT0 as NMI. + * + * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') + * is from Maciej W. Rozycki - so we do not have to EOI from + * the NMI handler or the timer interrupt. + */ + apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); + + on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1); + + apic_printk(APIC_VERBOSE, " done.\n"); +} + +/* + * This looks a bit hackish but it's about the only one way of sending + * a few INTA cycles to 8259As and any associated glue logic. ICR does + * not support the ExtINT mode, unfortunately. We need to send these + * cycles as some i82489DX-based boards have glue logic that keeps the + * 8259A interrupt line asserted until INTA. --macro + */ +static inline void unlock_ExtINT_logic(void) +{ + int apic, pin, i; + struct IO_APIC_route_entry entry0, entry1; + unsigned char save_control, save_freq_select; + + pin = find_isa_irq_pin(8, mp_INT); + if (pin == -1) { + WARN_ON_ONCE(1); + return; + } + apic = find_isa_irq_apic(8, mp_INT); + if (apic == -1) { + WARN_ON_ONCE(1); + return; + } + + entry0 = ioapic_read_entry(apic, pin); + clear_IO_APIC_pin(apic, pin); + + memset(&entry1, 0, sizeof(entry1)); + + entry1.dest_mode = 0; /* physical delivery */ + entry1.mask = 0; /* unmask IRQ now */ + entry1.dest.physical.physical_dest = hard_smp_processor_id(); + entry1.delivery_mode = dest_ExtINT; + entry1.polarity = entry0.polarity; + entry1.trigger = 0; + entry1.vector = 0; + + ioapic_write_entry(apic, pin, entry1); + + save_control = CMOS_READ(RTC_CONTROL); + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); + CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, + RTC_FREQ_SELECT); + CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); + + i = 100; + while (i-- > 0) { + mdelay(10); + if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) + i -= 10; + } + + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + clear_IO_APIC_pin(apic, pin); + + ioapic_write_entry(apic, pin, entry0); +} + +int timer_uses_ioapic_pin_0; + +/* + * This code may look a bit paranoid, but it's supposed to cooperate with + * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ + * is so screwy. Thanks to Brian Perkins for testing/hacking this beast + * fanatically on his truly buggy board. + */ +static inline void __init check_timer(void) +{ + int apic1, pin1, apic2, pin2; + int vector; + + /* + * get/set the timer IRQ vector: + */ + disable_8259A_irq(0); + vector = assign_irq_vector(0); + set_intr_gate(vector, interrupt[0]); + + /* + * Subtle, code in do_timer_interrupt() expects an AEOI + * mode for the 8259A whenever interrupts are routed + * through I/O APICs. Also IRQ0 has to be enabled in + * the 8259A which implies the virtual wire has to be + * disabled in the local APIC. + */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + init_8259A(1); + timer_ack = 1; + if (timer_over_8254 > 0) + enable_8259A_irq(0); + + pin1 = find_isa_irq_pin(0, mp_INT); + apic1 = find_isa_irq_apic(0, mp_INT); + pin2 = ioapic_i8259.pin; + apic2 = ioapic_i8259.apic; + + if (pin1 == 0) + timer_uses_ioapic_pin_0 = 1; + + printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", + vector, apic1, pin1, apic2, pin2); + + if (pin1 != -1) { + /* + * Ok, does IRQ0 through the IOAPIC work? + */ + unmask_IO_APIC_irq(0); + if (timer_irq_works()) { + if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); + setup_nmi(); + enable_8259A_irq(0); + } + if (disable_timer_pin_1 > 0) + clear_IO_APIC_pin(0, pin1); + return; + } + clear_IO_APIC_pin(apic1, pin1); + printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " + "IO-APIC\n"); + } + + printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); + if (pin2 != -1) { + printk("\n..... (found pin %d) ...", pin2); + /* + * legacy devices should be connected to IO APIC #0 + */ + setup_ExtINT_IRQ0_pin(apic2, pin2, vector); + if (timer_irq_works()) { + printk("works.\n"); + if (pin1 != -1) + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); + else + add_pin_to_irq(0, apic2, pin2); + if (nmi_watchdog == NMI_IO_APIC) { + setup_nmi(); + } + return; + } + /* + * Cleanup, just in case ... + */ + clear_IO_APIC_pin(apic2, pin2); + } + printk(" failed.\n"); + + if (nmi_watchdog == NMI_IO_APIC) { + printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); + nmi_watchdog = 0; + } + + printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); + + disable_8259A_irq(0); + set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, + "fasteoi"); + apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ + enable_8259A_irq(0); + + if (timer_irq_works()) { + printk(" works.\n"); + return; + } + apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); + printk(" failed.\n"); + + printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); + + timer_ack = 0; + init_8259A(0); + make_8259A_irq(0); + apic_write_around(APIC_LVT0, APIC_DM_EXTINT); + + unlock_ExtINT_logic(); + + if (timer_irq_works()) { + printk(" works.\n"); + return; + } + printk(" failed :(.\n"); + panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " + "report. Then try booting with the 'noapic' option"); +} + +/* + * + * IRQ's that are handled by the PIC in the MPS IOAPIC case. + * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. + * Linux doesn't really care, as it's not actually used + * for any interrupt handling anyway. + */ +#define PIC_IRQS (1 << PIC_CASCADE_IR) + +void __init setup_IO_APIC(void) +{ + enable_IO_APIC(); + + if (acpi_ioapic) + io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ + else + io_apic_irqs = ~PIC_IRQS; + + printk("ENABLING IO-APIC IRQs\n"); + + /* + * Set up IO-APIC IRQ routing. + */ + if (!acpi_ioapic) + setup_ioapic_ids_from_mpc(); + sync_Arb_IDs(); + setup_IO_APIC_irqs(); + init_IO_APIC_traps(); + check_timer(); + if (!acpi_ioapic) + print_IO_APIC(); +} + +static int __init setup_disable_8254_timer(char *s) +{ + timer_over_8254 = -1; + return 1; +} +static int __init setup_enable_8254_timer(char *s) +{ + timer_over_8254 = 2; + return 1; +} + +__setup("disable_8254_timer", setup_disable_8254_timer); +__setup("enable_8254_timer", setup_enable_8254_timer); + +/* + * Called after all the initialization is done. If we didnt find any + * APIC bugs then we can allow the modify fast path + */ + +static int __init io_apic_bug_finalize(void) +{ + if(sis_apic_bug == -1) + sis_apic_bug = 0; + return 0; +} + +late_initcall(io_apic_bug_finalize); + +struct sysfs_ioapic_data { + struct sys_device dev; + struct IO_APIC_route_entry entry[0]; +}; +static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; + +static int ioapic_suspend(struct sys_device *dev, pm_message_t state) +{ + struct IO_APIC_route_entry *entry; + struct sysfs_ioapic_data *data; + int i; + + data = container_of(dev, struct sysfs_ioapic_data, dev); + entry = data->entry; + for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + entry[i] = ioapic_read_entry(dev->id, i); + + return 0; +} + +static int ioapic_resume(struct sys_device *dev) +{ + struct IO_APIC_route_entry *entry; + struct sysfs_ioapic_data *data; + unsigned long flags; + union IO_APIC_reg_00 reg_00; + int i; + + data = container_of(dev, struct sysfs_ioapic_data, dev); + entry = data->entry; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(dev->id, 0); + if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + io_apic_write(dev->id, 0, reg_00.raw); + } + spin_unlock_irqrestore(&ioapic_lock, flags); + for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + ioapic_write_entry(dev->id, i, entry[i]); + + return 0; +} + +static struct sysdev_class ioapic_sysdev_class = { + set_kset_name("ioapic"), + .suspend = ioapic_suspend, + .resume = ioapic_resume, +}; + +static int __init ioapic_init_sysfs(void) +{ + struct sys_device * dev; + int i, size, error = 0; + + error = sysdev_class_register(&ioapic_sysdev_class); + if (error) + return error; + + for (i = 0; i < nr_ioapics; i++ ) { + size = sizeof(struct sys_device) + nr_ioapic_registers[i] + * sizeof(struct IO_APIC_route_entry); + mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); + if (!mp_ioapic_data[i]) { + printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); + continue; + } + memset(mp_ioapic_data[i], 0, size); + dev = &mp_ioapic_data[i]->dev; + dev->id = i; + dev->cls = &ioapic_sysdev_class; + error = sysdev_register(dev); + if (error) { + kfree(mp_ioapic_data[i]); + mp_ioapic_data[i] = NULL; + printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); + continue; + } + } + + return 0; +} + +device_initcall(ioapic_init_sysfs); + +/* + * Dynamic irq allocate and deallocation + */ +int create_irq(void) +{ + /* Allocate an unused irq */ + int irq, new, vector = 0; + unsigned long flags; + + irq = -ENOSPC; + spin_lock_irqsave(&vector_lock, flags); + for (new = (NR_IRQS - 1); new >= 0; new--) { + if (platform_legacy_irq(new)) + continue; + if (irq_vector[new] != 0) + continue; + vector = __assign_irq_vector(new); + if (likely(vector > 0)) + irq = new; + break; + } + spin_unlock_irqrestore(&vector_lock, flags); + + if (irq >= 0) { + set_intr_gate(vector, interrupt[irq]); + dynamic_irq_init(irq); + } + return irq; +} + +void destroy_irq(unsigned int irq) +{ + unsigned long flags; + + dynamic_irq_cleanup(irq); + + spin_lock_irqsave(&vector_lock, flags); + irq_vector[irq] = 0; + spin_unlock_irqrestore(&vector_lock, flags); +} + +/* + * MSI mesage composition + */ +#ifdef CONFIG_PCI_MSI +static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) +{ + int vector; + unsigned dest; + + vector = assign_irq_vector(irq); + if (vector >= 0) { + dest = cpu_mask_to_apicid(TARGET_CPUS); + + msg->address_hi = MSI_ADDR_BASE_HI; + msg->address_lo = + MSI_ADDR_BASE_LO | + ((INT_DEST_MODE == 0) ? + MSI_ADDR_DEST_MODE_PHYSICAL: + MSI_ADDR_DEST_MODE_LOGICAL) | + ((INT_DELIVERY_MODE != dest_LowestPrio) ? + MSI_ADDR_REDIRECTION_CPU: + MSI_ADDR_REDIRECTION_LOWPRI) | + MSI_ADDR_DEST_ID(dest); + + msg->data = + MSI_DATA_TRIGGER_EDGE | + MSI_DATA_LEVEL_ASSERT | + ((INT_DELIVERY_MODE != dest_LowestPrio) ? + MSI_DATA_DELIVERY_FIXED: + MSI_DATA_DELIVERY_LOWPRI) | + MSI_DATA_VECTOR(vector); + } + return vector; +} + +#ifdef CONFIG_SMP +static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask) +{ + struct msi_msg msg; + unsigned int dest; + cpumask_t tmp; + int vector; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + vector = assign_irq_vector(irq); + if (vector < 0) + return; + + dest = cpu_mask_to_apicid(mask); + + read_msi_msg(irq, &msg); + + msg.data &= ~MSI_DATA_VECTOR_MASK; + msg.data |= MSI_DATA_VECTOR(vector); + msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; + msg.address_lo |= MSI_ADDR_DEST_ID(dest); + + write_msi_msg(irq, &msg); + irq_desc[irq].affinity = mask; +} +#endif /* CONFIG_SMP */ + +/* + * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, + * which implement the MSI or MSI-X Capability Structure. + */ +static struct irq_chip msi_chip = { + .name = "PCI-MSI", + .unmask = unmask_msi_irq, + .mask = mask_msi_irq, + .ack = ack_ioapic_irq, +#ifdef CONFIG_SMP + .set_affinity = set_msi_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ + struct msi_msg msg; + int irq, ret; + irq = create_irq(); + if (irq < 0) + return irq; + + ret = msi_compose_msg(dev, irq, &msg); + if (ret < 0) { + destroy_irq(irq); + return ret; + } + + set_irq_msi(irq, desc); + write_msi_msg(irq, &msg); + + set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, + "edge"); + + return 0; +} + +void arch_teardown_msi_irq(unsigned int irq) +{ + destroy_irq(irq); +} + +#endif /* CONFIG_PCI_MSI */ + +/* + * Hypertransport interrupt support + */ +#ifdef CONFIG_HT_IRQ + +#ifdef CONFIG_SMP + +static void target_ht_irq(unsigned int irq, unsigned int dest) +{ + struct ht_irq_msg msg; + fetch_ht_irq_msg(irq, &msg); + + msg.address_lo &= ~(HT_IRQ_LOW_DEST_ID_MASK); + msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK); + + msg.address_lo |= HT_IRQ_LOW_DEST_ID(dest); + msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest); + + write_ht_irq_msg(irq, &msg); +} + +static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) +{ + unsigned int dest; + cpumask_t tmp; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + tmp = TARGET_CPUS; + + cpus_and(mask, tmp, CPU_MASK_ALL); + + dest = cpu_mask_to_apicid(mask); + + target_ht_irq(irq, dest); + irq_desc[irq].affinity = mask; +} +#endif + +static struct irq_chip ht_irq_chip = { + .name = "PCI-HT", + .mask = mask_ht_irq, + .unmask = unmask_ht_irq, + .ack = ack_ioapic_irq, +#ifdef CONFIG_SMP + .set_affinity = set_ht_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) +{ + int vector; + + vector = assign_irq_vector(irq); + if (vector >= 0) { + struct ht_irq_msg msg; + unsigned dest; + cpumask_t tmp; + + cpus_clear(tmp); + cpu_set(vector >> 8, tmp); + dest = cpu_mask_to_apicid(tmp); + + msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest); + + msg.address_lo = + HT_IRQ_LOW_BASE | + HT_IRQ_LOW_DEST_ID(dest) | + HT_IRQ_LOW_VECTOR(vector) | + ((INT_DEST_MODE == 0) ? + HT_IRQ_LOW_DM_PHYSICAL : + HT_IRQ_LOW_DM_LOGICAL) | + HT_IRQ_LOW_RQEOI_EDGE | + ((INT_DELIVERY_MODE != dest_LowestPrio) ? + HT_IRQ_LOW_MT_FIXED : + HT_IRQ_LOW_MT_ARBITRATED) | + HT_IRQ_LOW_IRQ_MASKED; + + write_ht_irq_msg(irq, &msg); + + set_irq_chip_and_handler_name(irq, &ht_irq_chip, + handle_edge_irq, "edge"); + } + return vector; +} +#endif /* CONFIG_HT_IRQ */ + +/* -------------------------------------------------------------------------- + ACPI-based IOAPIC Configuration + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI + +int __init io_apic_get_unique_id (int ioapic, int apic_id) +{ + union IO_APIC_reg_00 reg_00; + static physid_mask_t apic_id_map = PHYSID_MASK_NONE; + physid_mask_t tmp; + unsigned long flags; + int i = 0; + + /* + * The P4 platform supports up to 256 APIC IDs on two separate APIC + * buses (one for LAPICs, one for IOAPICs), where predecessors only + * supports up to 16 on one shared APIC bus. + * + * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full + * advantage of new APIC bus architecture. + */ + + if (physids_empty(apic_id_map)) + apic_id_map = ioapic_phys_id_map(phys_cpu_present_map); + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(ioapic, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + + if (apic_id >= get_physical_broadcast()) { + printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " + "%d\n", ioapic, apic_id, reg_00.bits.ID); + apic_id = reg_00.bits.ID; + } + + /* + * Every APIC in a system must have a unique ID or we get lots of nice + * 'stuck on smp_invalidate_needed IPI wait' messages. + */ + if (check_apicid_used(apic_id_map, apic_id)) { + + for (i = 0; i < get_physical_broadcast(); i++) { + if (!check_apicid_used(apic_id_map, i)) + break; + } + + if (i == get_physical_broadcast()) + panic("Max apic_id exceeded!\n"); + + printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " + "trying %d\n", ioapic, apic_id, i); + + apic_id = i; + } + + tmp = apicid_to_cpu_present(apic_id); + physids_or(apic_id_map, apic_id_map, tmp); + + if (reg_00.bits.ID != apic_id) { + reg_00.bits.ID = apic_id; + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(ioapic, 0, reg_00.raw); + reg_00.raw = io_apic_read(ioapic, 0); + spin_unlock_irqrestore(&ioapic_lock, flags); + + /* Sanity check */ + if (reg_00.bits.ID != apic_id) { + printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); + return -1; + } + } + + apic_printk(APIC_VERBOSE, KERN_INFO + "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); + + return apic_id; +} + + +int __init io_apic_get_version (int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return reg_01.bits.version; +} + + +int __init io_apic_get_redir_entries (int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return reg_01.bits.entries; +} + + +int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) +{ + struct IO_APIC_route_entry entry; + unsigned long flags; + + if (!IO_APIC_IRQ(irq)) { + printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", + ioapic); + return -EINVAL; + } + + /* + * Generate a PCI IRQ routing entry and program the IOAPIC accordingly. + * Note that we mask (disable) IRQs now -- these get enabled when the + * corresponding device driver registers for this IRQ. + */ + + memset(&entry,0,sizeof(entry)); + + entry.delivery_mode = INT_DELIVERY_MODE; + entry.dest_mode = INT_DEST_MODE; + entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.trigger = edge_level; + entry.polarity = active_high_low; + entry.mask = 1; + + /* + * IRQs < 16 are already in the irq_2_pin[] map + */ + if (irq >= 16) + add_pin_to_irq(irq, ioapic, pin); + + entry.vector = assign_irq_vector(irq); + + apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry " + "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic, + mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, + edge_level, active_high_low); + + ioapic_register_intr(irq, entry.vector, edge_level); + + if (!ioapic && (irq < 16)) + disable_8259A_irq(irq); + + spin_lock_irqsave(&ioapic_lock, flags); + __ioapic_write_entry(ioapic, pin, entry); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return 0; +} + +#endif /* CONFIG_ACPI */ + +static int __init parse_disable_timer_pin_1(char *arg) +{ + disable_timer_pin_1 = 1; + return 0; +} +early_param("disable_timer_pin_1", parse_disable_timer_pin_1); + +static int __init parse_enable_timer_pin_1(char *arg) +{ + disable_timer_pin_1 = -1; + return 0; +} +early_param("enable_timer_pin_1", parse_enable_timer_pin_1); + +static int __init parse_noapic(char *arg) +{ + /* disable IO-APIC */ + disable_ioapic_setup(); + return 0; +} +early_param("noapic", parse_noapic); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c new file mode 100644 index 000000000000..966fa1062491 --- /dev/null +++ b/arch/x86/kernel/io_apic_64.c @@ -0,0 +1,2202 @@ +/* + * Intel IO-APIC support for multi-Pentium hosts. + * + * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo + * + * Many thanks to Stig Venaas for trying out countless experimental + * patches and reporting/debugging problems patiently! + * + * (c) 1999, Multiple IO-APIC support, developed by + * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and + * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, + * further tested and cleaned up by Zach Brown <zab@redhat.com> + * and Ingo Molnar <mingo@redhat.com> + * + * Fixes + * Maciej W. Rozycki : Bits for genuine 82489DX APICs; + * thanks to Eric Gilmore + * and Rolf G. Tews + * for testing these extensively + * Paul Diefenbaugh : Added full ACPI support + */ + +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/mc146818rtc.h> +#include <linux/acpi.h> +#include <linux/sysdev.h> +#include <linux/msi.h> +#include <linux/htirq.h> +#ifdef CONFIG_ACPI +#include <acpi/acpi_bus.h> +#endif + +#include <asm/idle.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/desc.h> +#include <asm/proto.h> +#include <asm/mach_apic.h> +#include <asm/acpi.h> +#include <asm/dma.h> +#include <asm/nmi.h> +#include <asm/msidef.h> +#include <asm/hypertransport.h> + +struct irq_cfg { + cpumask_t domain; + cpumask_t old_domain; + unsigned move_cleanup_count; + u8 vector; + u8 move_in_progress : 1; +}; + +/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ +struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { + [0] = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR, }, + [1] = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR, }, + [2] = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR, }, + [3] = { .domain = CPU_MASK_ALL, .vector = IRQ3_VECTOR, }, + [4] = { .domain = CPU_MASK_ALL, .vector = IRQ4_VECTOR, }, + [5] = { .domain = CPU_MASK_ALL, .vector = IRQ5_VECTOR, }, + [6] = { .domain = CPU_MASK_ALL, .vector = IRQ6_VECTOR, }, + [7] = { .domain = CPU_MASK_ALL, .vector = IRQ7_VECTOR, }, + [8] = { .domain = CPU_MASK_ALL, .vector = IRQ8_VECTOR, }, + [9] = { .domain = CPU_MASK_ALL, .vector = IRQ9_VECTOR, }, + [10] = { .domain = CPU_MASK_ALL, .vector = IRQ10_VECTOR, }, + [11] = { .domain = CPU_MASK_ALL, .vector = IRQ11_VECTOR, }, + [12] = { .domain = CPU_MASK_ALL, .vector = IRQ12_VECTOR, }, + [13] = { .domain = CPU_MASK_ALL, .vector = IRQ13_VECTOR, }, + [14] = { .domain = CPU_MASK_ALL, .vector = IRQ14_VECTOR, }, + [15] = { .domain = CPU_MASK_ALL, .vector = IRQ15_VECTOR, }, +}; + +static int assign_irq_vector(int irq, cpumask_t mask); + +#define __apicdebuginit __init + +int sis_apic_bug; /* not actually supported, dummy for compile */ + +static int no_timer_check; + +static int disable_timer_pin_1 __initdata; + +int timer_over_8254 __initdata = 1; + +/* Where if anywhere is the i8259 connect in external int mode */ +static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; + +static DEFINE_SPINLOCK(ioapic_lock); +DEFINE_SPINLOCK(vector_lock); + +/* + * # of IRQ routing registers + */ +int nr_ioapic_registers[MAX_IO_APICS]; + +/* + * Rough estimation of how many shared IRQs there are, can + * be changed anytime. + */ +#define MAX_PLUS_SHARED_IRQS NR_IRQS +#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) + +/* + * This is performance-critical, we want to do it O(1) + * + * the indexing order of this array favors 1:1 mappings + * between pins and IRQs. + */ + +static struct irq_pin_list { + short apic, pin, next; +} irq_2_pin[PIN_MAP_SIZE]; + +struct io_apic { + unsigned int index; + unsigned int unused[3]; + unsigned int data; +}; + +static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) +{ + return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) + + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); +} + +static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + return readl(&io_apic->data); +} + +static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + +/* + * Re-write a value: to be used for read-modify-write + * cycles where the read already set up the index register. + */ +static inline void io_apic_modify(unsigned int apic, unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(value, &io_apic->data); +} + +static int io_apic_level_ack_pending(unsigned int irq) +{ + struct irq_pin_list *entry; + unsigned long flags; + int pending = 0; + + spin_lock_irqsave(&ioapic_lock, flags); + entry = irq_2_pin + irq; + for (;;) { + unsigned int reg; + int pin; + + pin = entry->pin; + if (pin == -1) + break; + reg = io_apic_read(entry->apic, 0x10 + pin*2); + /* Is the remote IRR bit set? */ + pending |= (reg >> 14) & 1; + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } + spin_unlock_irqrestore(&ioapic_lock, flags); + return pending; +} + +/* + * Synchronize the IO-APIC and the CPU by doing + * a dummy read from the IO-APIC + */ +static inline void io_apic_sync(unsigned int apic) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + readl(&io_apic->data); +} + +#define __DO_ACTION(R, ACTION, FINAL) \ + \ +{ \ + int pin; \ + struct irq_pin_list *entry = irq_2_pin + irq; \ + \ + BUG_ON(irq >= NR_IRQS); \ + for (;;) { \ + unsigned int reg; \ + pin = entry->pin; \ + if (pin == -1) \ + break; \ + reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \ + reg ACTION; \ + io_apic_modify(entry->apic, reg); \ + FINAL; \ + if (!entry->next) \ + break; \ + entry = irq_2_pin + entry->next; \ + } \ +} + +union entry_union { + struct { u32 w1, w2; }; + struct IO_APIC_route_entry entry; +}; + +static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) +{ + union entry_union eu; + unsigned long flags; + spin_lock_irqsave(&ioapic_lock, flags); + eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); + eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + return eu.entry; +} + +/* + * When we write a new IO APIC routing entry, we need to write the high + * word first! If the mask bit in the low word is clear, we will enable + * the interrupt, and we need to make sure the entry is fully populated + * before that happens. + */ +static void +__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + union entry_union eu; + eu.entry = e; + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); +} + +static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) +{ + unsigned long flags; + spin_lock_irqsave(&ioapic_lock, flags); + __ioapic_write_entry(apic, pin, e); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * When we mask an IO APIC routing entry, we need to write the low + * word first, in order to set the mask bit before we change the + * high bits! + */ +static void ioapic_mask_entry(int apic, int pin) +{ + unsigned long flags; + union entry_union eu = { .entry.mask = 1 }; + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +#ifdef CONFIG_SMP +static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) +{ + int apic, pin; + struct irq_pin_list *entry = irq_2_pin + irq; + + BUG_ON(irq >= NR_IRQS); + for (;;) { + unsigned int reg; + apic = entry->apic; + pin = entry->pin; + if (pin == -1) + break; + io_apic_write(apic, 0x11 + pin*2, dest); + reg = io_apic_read(apic, 0x10 + pin*2); + reg &= ~0x000000ff; + reg |= vector; + io_apic_modify(apic, reg); + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } +} + +static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + unsigned long flags; + unsigned int dest; + cpumask_t tmp; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(tmp, cfg->domain, mask); + dest = cpu_mask_to_apicid(tmp); + + /* + * Only the high 8 bits are valid. + */ + dest = SET_APIC_LOGICAL_ID(dest); + + spin_lock_irqsave(&ioapic_lock, flags); + __target_IO_APIC_irq(irq, dest, cfg->vector); + irq_desc[irq].affinity = mask; + spin_unlock_irqrestore(&ioapic_lock, flags); +} +#endif + +/* + * The common case is 1:1 IRQ<->pin mappings. Sometimes there are + * shared ISA-space IRQs, so we have to support them. We are super + * fast in the common case, and fast for shared ISA-space IRQs. + */ +static void add_pin_to_irq(unsigned int irq, int apic, int pin) +{ + static int first_free_entry = NR_IRQS; + struct irq_pin_list *entry = irq_2_pin + irq; + + BUG_ON(irq >= NR_IRQS); + while (entry->next) + entry = irq_2_pin + entry->next; + + if (entry->pin != -1) { + entry->next = first_free_entry; + entry = irq_2_pin + entry->next; + if (++first_free_entry >= PIN_MAP_SIZE) + panic("io_apic.c: ran out of irq_2_pin entries!"); + } + entry->apic = apic; + entry->pin = pin; +} + + +#define DO_ACTION(name,R,ACTION, FINAL) \ + \ + static void name##_IO_APIC_irq (unsigned int irq) \ + __DO_ACTION(R, ACTION, FINAL) + +DO_ACTION( __mask, 0, |= 0x00010000, io_apic_sync(entry->apic) ) + /* mask = 1 */ +DO_ACTION( __unmask, 0, &= 0xfffeffff, ) + /* mask = 0 */ + +static void mask_IO_APIC_irq (unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + __mask_IO_APIC_irq(irq); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void unmask_IO_APIC_irq (unsigned int irq) +{ + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + __unmask_IO_APIC_irq(irq); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) +{ + struct IO_APIC_route_entry entry; + + /* Check delivery_mode to be sure we're not clearing an SMI pin */ + entry = ioapic_read_entry(apic, pin); + if (entry.delivery_mode == dest_SMI) + return; + /* + * Disable it in the IO-APIC irq-routing table: + */ + ioapic_mask_entry(apic, pin); +} + +static void clear_IO_APIC (void) +{ + int apic, pin; + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) + clear_IO_APIC_pin(apic, pin); +} + +int skip_ioapic_setup; +int ioapic_force; + +static int __init parse_noapic(char *str) +{ + disable_ioapic_setup(); + return 0; +} +early_param("noapic", parse_noapic); + +/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ +static int __init disable_timer_pin_setup(char *arg) +{ + disable_timer_pin_1 = 1; + return 1; +} +__setup("disable_timer_pin_1", disable_timer_pin_setup); + +static int __init setup_disable_8254_timer(char *s) +{ + timer_over_8254 = -1; + return 1; +} +static int __init setup_enable_8254_timer(char *s) +{ + timer_over_8254 = 2; + return 1; +} + +__setup("disable_8254_timer", setup_disable_8254_timer); +__setup("enable_8254_timer", setup_enable_8254_timer); + + +/* + * Find the IRQ entry number of a certain pin. + */ +static int find_irq_entry(int apic, int pin, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].mpc_irqtype == type && + (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || + mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && + mp_irqs[i].mpc_dstirq == pin) + return i; + + return -1; +} + +/* + * Find the pin to which IRQ[irq] (ISA) is connected + */ +static int __init find_isa_irq_pin(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + if (test_bit(lbus, mp_bus_not_pci) && + (mp_irqs[i].mpc_irqtype == type) && + (mp_irqs[i].mpc_srcbusirq == irq)) + + return mp_irqs[i].mpc_dstirq; + } + return -1; +} + +static int __init find_isa_irq_apic(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + if (test_bit(lbus, mp_bus_not_pci) && + (mp_irqs[i].mpc_irqtype == type) && + (mp_irqs[i].mpc_srcbusirq == irq)) + break; + } + if (i < mp_irq_entries) { + int apic; + for(apic = 0; apic < nr_ioapics; apic++) { + if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + return apic; + } + } + + return -1; +} + +/* + * Find a specific PCI IRQ entry. + * Not an __init, possibly needed by modules + */ +static int pin_2_irq(int idx, int apic, int pin); + +int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) +{ + int apic, i, best_guess = -1; + + apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", + bus, slot, pin); + if (mp_bus_id_to_pci_bus[bus] == -1) { + apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); + return -1; + } + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + for (apic = 0; apic < nr_ioapics; apic++) + if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || + mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + break; + + if (!test_bit(lbus, mp_bus_not_pci) && + !mp_irqs[i].mpc_irqtype && + (bus == lbus) && + (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + + if (!(apic || IO_APIC_IRQ(irq))) + continue; + + if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + return irq; + /* + * Use the first all-but-pin matching entry as a + * best-guess fuzzy result for broken mptables. + */ + if (best_guess < 0) + best_guess = irq; + } + } + BUG_ON(best_guess >= NR_IRQS); + return best_guess; +} + +/* ISA interrupts are always polarity zero edge triggered, + * when listed as conforming in the MP table. */ + +#define default_ISA_trigger(idx) (0) +#define default_ISA_polarity(idx) (0) + +/* PCI interrupts are always polarity one level triggered, + * when listed as conforming in the MP table. */ + +#define default_PCI_trigger(idx) (1) +#define default_PCI_polarity(idx) (1) + +static int __init MPBIOS_polarity(int idx) +{ + int bus = mp_irqs[idx].mpc_srcbus; + int polarity; + + /* + * Determine IRQ line polarity (high active or low active): + */ + switch (mp_irqs[idx].mpc_irqflag & 3) + { + case 0: /* conforms, ie. bus-type dependent polarity */ + if (test_bit(bus, mp_bus_not_pci)) + polarity = default_ISA_polarity(idx); + else + polarity = default_PCI_polarity(idx); + break; + case 1: /* high active */ + { + polarity = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + case 3: /* low active */ + { + polarity = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + } + return polarity; +} + +static int MPBIOS_trigger(int idx) +{ + int bus = mp_irqs[idx].mpc_srcbus; + int trigger; + + /* + * Determine IRQ trigger mode (edge or level sensitive): + */ + switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + { + case 0: /* conforms, ie. bus-type dependent */ + if (test_bit(bus, mp_bus_not_pci)) + trigger = default_ISA_trigger(idx); + else + trigger = default_PCI_trigger(idx); + break; + case 1: /* edge */ + { + trigger = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + case 3: /* level */ + { + trigger = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 0; + break; + } + } + return trigger; +} + +static inline int irq_polarity(int idx) +{ + return MPBIOS_polarity(idx); +} + +static inline int irq_trigger(int idx) +{ + return MPBIOS_trigger(idx); +} + +static int pin_2_irq(int idx, int apic, int pin) +{ + int irq, i; + int bus = mp_irqs[idx].mpc_srcbus; + + /* + * Debugging check, we are in big trouble if this message pops up! + */ + if (mp_irqs[idx].mpc_dstirq != pin) + printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); + + if (test_bit(bus, mp_bus_not_pci)) { + irq = mp_irqs[idx].mpc_srcbusirq; + } else { + /* + * PCI IRQs are mapped in order + */ + i = irq = 0; + while (i < apic) + irq += nr_ioapic_registers[i++]; + irq += pin; + } + BUG_ON(irq >= NR_IRQS); + return irq; +} + +static int __assign_irq_vector(int irq, cpumask_t mask) +{ + /* + * NOTE! The local APIC isn't very good at handling + * multiple interrupts at the same interrupt level. + * As the interrupt level is determined by taking the + * vector number and shifting that right by 4, we + * want to spread these out a bit so that they don't + * all fall in the same interrupt level. + * + * Also, we've got to be careful not to trash gate + * 0x80, because int 0x80 is hm, kind of importantish. ;) + */ + static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; + unsigned int old_vector; + int cpu; + struct irq_cfg *cfg; + + BUG_ON((unsigned)irq >= NR_IRQS); + cfg = &irq_cfg[irq]; + + /* Only try and allocate irqs on cpus that are present */ + cpus_and(mask, mask, cpu_online_map); + + if ((cfg->move_in_progress) || cfg->move_cleanup_count) + return -EBUSY; + + old_vector = cfg->vector; + if (old_vector) { + cpumask_t tmp; + cpus_and(tmp, cfg->domain, mask); + if (!cpus_empty(tmp)) + return 0; + } + + for_each_cpu_mask(cpu, mask) { + cpumask_t domain, new_mask; + int new_cpu; + int vector, offset; + + domain = vector_allocation_domain(cpu); + cpus_and(new_mask, domain, cpu_online_map); + + vector = current_vector; + offset = current_offset; +next: + vector += 8; + if (vector >= FIRST_SYSTEM_VECTOR) { + /* If we run out of vectors on large boxen, must share them. */ + offset = (offset + 1) % 8; + vector = FIRST_DEVICE_VECTOR + offset; + } + if (unlikely(current_vector == vector)) + continue; + if (vector == IA32_SYSCALL_VECTOR) + goto next; + for_each_cpu_mask(new_cpu, new_mask) + if (per_cpu(vector_irq, new_cpu)[vector] != -1) + goto next; + /* Found one! */ + current_vector = vector; + current_offset = offset; + if (old_vector) { + cfg->move_in_progress = 1; + cfg->old_domain = cfg->domain; + } + for_each_cpu_mask(new_cpu, new_mask) + per_cpu(vector_irq, new_cpu)[vector] = irq; + cfg->vector = vector; + cfg->domain = domain; + return 0; + } + return -ENOSPC; +} + +static int assign_irq_vector(int irq, cpumask_t mask) +{ + int err; + unsigned long flags; + + spin_lock_irqsave(&vector_lock, flags); + err = __assign_irq_vector(irq, mask); + spin_unlock_irqrestore(&vector_lock, flags); + return err; +} + +static void __clear_irq_vector(int irq) +{ + struct irq_cfg *cfg; + cpumask_t mask; + int cpu, vector; + + BUG_ON((unsigned)irq >= NR_IRQS); + cfg = &irq_cfg[irq]; + BUG_ON(!cfg->vector); + + vector = cfg->vector; + cpus_and(mask, cfg->domain, cpu_online_map); + for_each_cpu_mask(cpu, mask) + per_cpu(vector_irq, cpu)[vector] = -1; + + cfg->vector = 0; + cfg->domain = CPU_MASK_NONE; +} + +void __setup_vector_irq(int cpu) +{ + /* Initialize vector_irq on a new cpu */ + /* This function must be called with vector_lock held */ + int irq, vector; + + /* Mark the inuse vectors */ + for (irq = 0; irq < NR_IRQS; ++irq) { + if (!cpu_isset(cpu, irq_cfg[irq].domain)) + continue; + vector = irq_cfg[irq].vector; + per_cpu(vector_irq, cpu)[vector] = irq; + } + /* Mark the free vectors */ + for (vector = 0; vector < NR_VECTORS; ++vector) { + irq = per_cpu(vector_irq, cpu)[vector]; + if (irq < 0) + continue; + if (!cpu_isset(cpu, irq_cfg[irq].domain)) + per_cpu(vector_irq, cpu)[vector] = -1; + } +} + + +static struct irq_chip ioapic_chip; + +static void ioapic_register_intr(int irq, unsigned long trigger) +{ + if (trigger) { + irq_desc[irq].status |= IRQ_LEVEL; + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_fasteoi_irq, "fasteoi"); + } else { + irq_desc[irq].status &= ~IRQ_LEVEL; + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_edge_irq, "edge"); + } +} + +static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, + int trigger, int polarity) +{ + struct irq_cfg *cfg = irq_cfg + irq; + struct IO_APIC_route_entry entry; + cpumask_t mask; + + if (!IO_APIC_IRQ(irq)) + return; + + mask = TARGET_CPUS; + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(mask, cfg->domain, mask); + + apic_printk(APIC_VERBOSE,KERN_DEBUG + "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " + "IRQ %d Mode:%i Active:%i)\n", + apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector, + irq, trigger, polarity); + + /* + * add it to the IO-APIC irq-routing table: + */ + memset(&entry,0,sizeof(entry)); + + entry.delivery_mode = INT_DELIVERY_MODE; + entry.dest_mode = INT_DEST_MODE; + entry.dest = cpu_mask_to_apicid(mask); + entry.mask = 0; /* enable IRQ */ + entry.trigger = trigger; + entry.polarity = polarity; + entry.vector = cfg->vector; + + /* Mask level triggered irqs. + * Use IRQ_DELAYED_DISABLE for edge triggered irqs. + */ + if (trigger) + entry.mask = 1; + + ioapic_register_intr(irq, trigger); + if (irq < 16) + disable_8259A_irq(irq); + + ioapic_write_entry(apic, pin, entry); +} + +static void __init setup_IO_APIC_irqs(void) +{ + int apic, pin, idx, irq, first_notcon = 1; + + apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); + + for (apic = 0; apic < nr_ioapics; apic++) { + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + + idx = find_irq_entry(apic,pin,mp_INT); + if (idx == -1) { + if (first_notcon) { + apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin); + first_notcon = 0; + } else + apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin); + continue; + } + + irq = pin_2_irq(idx, apic, pin); + add_pin_to_irq(irq, apic, pin); + + setup_IO_APIC_irq(apic, pin, irq, + irq_trigger(idx), irq_polarity(idx)); + } + } + + if (!first_notcon) + apic_printk(APIC_VERBOSE," not connected.\n"); +} + +/* + * Set up the 8259A-master output pin as broadcast to all + * CPUs. + */ +static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +{ + struct IO_APIC_route_entry entry; + unsigned long flags; + + memset(&entry,0,sizeof(entry)); + + disable_8259A_irq(0); + + /* mask LVT0 */ + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + + /* + * We use logical delivery to get the timer IRQ + * to the first CPU. + */ + entry.dest_mode = INT_DEST_MODE; + entry.mask = 0; /* unmask IRQ now */ + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.delivery_mode = INT_DELIVERY_MODE; + entry.polarity = 0; + entry.trigger = 0; + entry.vector = vector; + + /* + * The timer IRQ doesn't have to know that behind the + * scene we have a 8259A-master in AEOI mode ... + */ + set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); + + /* + * Add it to the IO-APIC irq-routing table: + */ + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); + io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); + spin_unlock_irqrestore(&ioapic_lock, flags); + + enable_8259A_irq(0); +} + +void __apicdebuginit print_IO_APIC(void) +{ + int apic, i; + union IO_APIC_reg_00 reg_00; + union IO_APIC_reg_01 reg_01; + union IO_APIC_reg_02 reg_02; + unsigned long flags; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + for (i = 0; i < nr_ioapics; i++) + printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", + mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + + /* + * We are a bit conservative about what we expect. We have to + * know about every hardware change ASAP. + */ + printk(KERN_INFO "testing the IO APIC.......................\n"); + + for (apic = 0; apic < nr_ioapics; apic++) { + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(apic, 0); + reg_01.raw = io_apic_read(apic, 1); + if (reg_01.bits.version >= 0x10) + reg_02.raw = io_apic_read(apic, 2); + spin_unlock_irqrestore(&ioapic_lock, flags); + + printk("\n"); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); + printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); + + printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); + printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); + + printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); + printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); + + if (reg_01.bits.version >= 0x10) { + printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); + printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); + } + + printk(KERN_DEBUG ".... IRQ redirection table:\n"); + + printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol" + " Stat Dmod Deli Vect: \n"); + + for (i = 0; i <= reg_01.bits.entries; i++) { + struct IO_APIC_route_entry entry; + + entry = ioapic_read_entry(apic, i); + + printk(KERN_DEBUG " %02x %03X ", + i, + entry.dest + ); + + printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", + entry.mask, + entry.trigger, + entry.irr, + entry.polarity, + entry.delivery_status, + entry.dest_mode, + entry.delivery_mode, + entry.vector + ); + } + } + printk(KERN_DEBUG "IRQ to pin mappings:\n"); + for (i = 0; i < NR_IRQS; i++) { + struct irq_pin_list *entry = irq_2_pin + i; + if (entry->pin < 0) + continue; + printk(KERN_DEBUG "IRQ%d ", i); + for (;;) { + printk("-> %d:%d", entry->apic, entry->pin); + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } + printk("\n"); + } + + printk(KERN_INFO ".................................... done.\n"); + + return; +} + +#if 0 + +static __apicdebuginit void print_APIC_bitfield (int base) +{ + unsigned int v; + int i, j; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); + for (i = 0; i < 8; i++) { + v = apic_read(base + i*0x10); + for (j = 0; j < 32; j++) { + if (v & (1<<j)) + printk("1"); + else + printk("0"); + } + printk("\n"); + } +} + +void __apicdebuginit print_local_APIC(void * dummy) +{ + unsigned int v, ver, maxlvt; + + if (apic_verbosity == APIC_QUIET) + return; + + printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", + smp_processor_id(), hard_smp_processor_id()); + v = apic_read(APIC_ID); + printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v)); + v = apic_read(APIC_LVR); + printk(KERN_INFO "... APIC VERSION: %08x\n", v); + ver = GET_APIC_VERSION(v); + maxlvt = get_maxlvt(); + + v = apic_read(APIC_TASKPRI); + printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); + + v = apic_read(APIC_ARBPRI); + printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, + v & APIC_ARBPRI_MASK); + v = apic_read(APIC_PROCPRI); + printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); + + v = apic_read(APIC_EOI); + printk(KERN_DEBUG "... APIC EOI: %08x\n", v); + v = apic_read(APIC_RRR); + printk(KERN_DEBUG "... APIC RRR: %08x\n", v); + v = apic_read(APIC_LDR); + printk(KERN_DEBUG "... APIC LDR: %08x\n", v); + v = apic_read(APIC_DFR); + printk(KERN_DEBUG "... APIC DFR: %08x\n", v); + v = apic_read(APIC_SPIV); + printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); + + printk(KERN_DEBUG "... APIC ISR field:\n"); + print_APIC_bitfield(APIC_ISR); + printk(KERN_DEBUG "... APIC TMR field:\n"); + print_APIC_bitfield(APIC_TMR); + printk(KERN_DEBUG "... APIC IRR field:\n"); + print_APIC_bitfield(APIC_IRR); + + v = apic_read(APIC_ESR); + printk(KERN_DEBUG "... APIC ESR: %08x\n", v); + + v = apic_read(APIC_ICR); + printk(KERN_DEBUG "... APIC ICR: %08x\n", v); + v = apic_read(APIC_ICR2); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); + + v = apic_read(APIC_LVTT); + printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); + + if (maxlvt > 3) { /* PC is LVT#4. */ + v = apic_read(APIC_LVTPC); + printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); + } + v = apic_read(APIC_LVT0); + printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); + v = apic_read(APIC_LVT1); + printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); + + if (maxlvt > 2) { /* ERR is LVT#3. */ + v = apic_read(APIC_LVTERR); + printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); + } + + v = apic_read(APIC_TMICT); + printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); + v = apic_read(APIC_TMCCT); + printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); + v = apic_read(APIC_TDCR); + printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); + printk("\n"); +} + +void print_all_local_APICs (void) +{ + on_each_cpu(print_local_APIC, NULL, 1, 1); +} + +void __apicdebuginit print_PIC(void) +{ + unsigned int v; + unsigned long flags; + + if (apic_verbosity == APIC_QUIET) + return; + + printk(KERN_DEBUG "\nprinting PIC contents\n"); + + spin_lock_irqsave(&i8259A_lock, flags); + + v = inb(0xa1) << 8 | inb(0x21); + printk(KERN_DEBUG "... PIC IMR: %04x\n", v); + + v = inb(0xa0) << 8 | inb(0x20); + printk(KERN_DEBUG "... PIC IRR: %04x\n", v); + + outb(0x0b,0xa0); + outb(0x0b,0x20); + v = inb(0xa0) << 8 | inb(0x20); + outb(0x0a,0xa0); + outb(0x0a,0x20); + + spin_unlock_irqrestore(&i8259A_lock, flags); + + printk(KERN_DEBUG "... PIC ISR: %04x\n", v); + + v = inb(0x4d1) << 8 | inb(0x4d0); + printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); +} + +#endif /* 0 */ + +static void __init enable_IO_APIC(void) +{ + union IO_APIC_reg_01 reg_01; + int i8259_apic, i8259_pin; + int i, apic; + unsigned long flags; + + for (i = 0; i < PIN_MAP_SIZE; i++) { + irq_2_pin[i].pin = -1; + irq_2_pin[i].next = 0; + } + + /* + * The number of IO-APIC IRQ registers (== #pins): + */ + for (apic = 0; apic < nr_ioapics; apic++) { + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(apic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + nr_ioapic_registers[apic] = reg_01.bits.entries+1; + } + for(apic = 0; apic < nr_ioapics; apic++) { + int pin; + /* See if any of the pins is in ExtINT mode */ + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + struct IO_APIC_route_entry entry; + entry = ioapic_read_entry(apic, pin); + + /* If the interrupt line is enabled and in ExtInt mode + * I have found the pin where the i8259 is connected. + */ + if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { + ioapic_i8259.apic = apic; + ioapic_i8259.pin = pin; + goto found_i8259; + } + } + } + found_i8259: + /* Look to see what if the MP table has reported the ExtINT */ + i8259_pin = find_isa_irq_pin(0, mp_ExtINT); + i8259_apic = find_isa_irq_apic(0, mp_ExtINT); + /* Trust the MP table if nothing is setup in the hardware */ + if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { + printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); + ioapic_i8259.pin = i8259_pin; + ioapic_i8259.apic = i8259_apic; + } + /* Complain if the MP table and the hardware disagree */ + if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && + (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) + { + printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); + } + + /* + * Do not trust the IO-APIC being empty at bootup + */ + clear_IO_APIC(); +} + +/* + * Not an __init, needed by the reboot code + */ +void disable_IO_APIC(void) +{ + /* + * Clear the IO-APIC before rebooting: + */ + clear_IO_APIC(); + + /* + * If the i8259 is routed through an IOAPIC + * Put that IOAPIC in virtual wire mode + * so legacy interrupts can be delivered. + */ + if (ioapic_i8259.pin != -1) { + struct IO_APIC_route_entry entry; + + memset(&entry, 0, sizeof(entry)); + entry.mask = 0; /* Enabled */ + entry.trigger = 0; /* Edge */ + entry.irr = 0; + entry.polarity = 0; /* High */ + entry.delivery_status = 0; + entry.dest_mode = 0; /* Physical */ + entry.delivery_mode = dest_ExtINT; /* ExtInt */ + entry.vector = 0; + entry.dest = GET_APIC_ID(apic_read(APIC_ID)); + + /* + * Add it to the IO-APIC irq-routing table: + */ + ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); + } + + disconnect_bsp_APIC(ioapic_i8259.pin != -1); +} + +/* + * There is a nasty bug in some older SMP boards, their mptable lies + * about the timer IRQ. We do the following to work around the situation: + * + * - timer IRQ defaults to IO-APIC IRQ + * - if this function detects that timer IRQs are defunct, then we fall + * back to ISA timer IRQs + */ +static int __init timer_irq_works(void) +{ + unsigned long t1 = jiffies; + + local_irq_enable(); + /* Let ten ticks pass... */ + mdelay((10 * 1000) / HZ); + + /* + * Expect a few ticks at least, to be sure some possible + * glue logic does not lock up after one or two first + * ticks in a non-ExtINT mode. Also the local APIC + * might have cached one ExtINT interrupt. Finally, at + * least one tick may be lost due to delays. + */ + + /* jiffies wrap? */ + if (jiffies - t1 > 4) + return 1; + return 0; +} + +/* + * In the SMP+IOAPIC case it might happen that there are an unspecified + * number of pending IRQ events unhandled. These cases are very rare, + * so we 'resend' these IRQs via IPIs, to the same CPU. It's much + * better to do it this way as thus we do not have to be aware of + * 'pending' interrupts in the IRQ path, except at this point. + */ +/* + * Edge triggered needs to resend any interrupt + * that was delayed but this is now handled in the device + * independent code. + */ + +/* + * Starting up a edge-triggered IO-APIC interrupt is + * nasty - we need to make sure that we get the edge. + * If it is already asserted for some reason, we need + * return 1 to indicate that is was pending. + * + * This is not complete - we should be able to fake + * an edge even if it isn't on the 8259A... + */ + +static unsigned int startup_ioapic_irq(unsigned int irq) +{ + int was_pending = 0; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + if (irq < 16) { + disable_8259A_irq(irq); + if (i8259A_irq_pending(irq)) + was_pending = 1; + } + __unmask_IO_APIC_irq(irq); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return was_pending; +} + +static int ioapic_retrigger_irq(unsigned int irq) +{ + struct irq_cfg *cfg = &irq_cfg[irq]; + cpumask_t mask; + unsigned long flags; + + spin_lock_irqsave(&vector_lock, flags); + cpus_clear(mask); + cpu_set(first_cpu(cfg->domain), mask); + + send_IPI_mask(mask, cfg->vector); + spin_unlock_irqrestore(&vector_lock, flags); + + return 1; +} + +/* + * Level and edge triggered IO-APIC interrupts need different handling, + * so we use two separate IRQ descriptors. Edge triggered IRQs can be + * handled with the level-triggered descriptor, but that one has slightly + * more overhead. Level-triggered interrupts cannot be handled with the + * edge-triggered handler, without risking IRQ storms and other ugly + * races. + */ + +#ifdef CONFIG_SMP +asmlinkage void smp_irq_move_cleanup_interrupt(void) +{ + unsigned vector, me; + ack_APIC_irq(); + exit_idle(); + irq_enter(); + + me = smp_processor_id(); + for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { + unsigned int irq; + struct irq_desc *desc; + struct irq_cfg *cfg; + irq = __get_cpu_var(vector_irq)[vector]; + if (irq >= NR_IRQS) + continue; + + desc = irq_desc + irq; + cfg = irq_cfg + irq; + spin_lock(&desc->lock); + if (!cfg->move_cleanup_count) + goto unlock; + + if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) + goto unlock; + + __get_cpu_var(vector_irq)[vector] = -1; + cfg->move_cleanup_count--; +unlock: + spin_unlock(&desc->lock); + } + + irq_exit(); +} + +static void irq_complete_move(unsigned int irq) +{ + struct irq_cfg *cfg = irq_cfg + irq; + unsigned vector, me; + + if (likely(!cfg->move_in_progress)) + return; + + vector = ~get_irq_regs()->orig_rax; + me = smp_processor_id(); + if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) { + cpumask_t cleanup_mask; + + cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); + cfg->move_cleanup_count = cpus_weight(cleanup_mask); + send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + cfg->move_in_progress = 0; + } +} +#else +static inline void irq_complete_move(unsigned int irq) {} +#endif + +static void ack_apic_edge(unsigned int irq) +{ + irq_complete_move(irq); + move_native_irq(irq); + ack_APIC_irq(); +} + +static void ack_apic_level(unsigned int irq) +{ + int do_unmask_irq = 0; + + irq_complete_move(irq); +#if defined(CONFIG_GENERIC_PENDING_IRQ) || defined(CONFIG_IRQBALANCE) + /* If we are moving the irq we need to mask it */ + if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) { + do_unmask_irq = 1; + mask_IO_APIC_irq(irq); + } +#endif + + /* + * We must acknowledge the irq before we move it or the acknowledge will + * not propagate properly. + */ + ack_APIC_irq(); + + /* Now we can move and renable the irq */ + if (unlikely(do_unmask_irq)) { + /* Only migrate the irq if the ack has been received. + * + * On rare occasions the broadcast level triggered ack gets + * delayed going to ioapics, and if we reprogram the + * vector while Remote IRR is still set the irq will never + * fire again. + * + * To prevent this scenario we read the Remote IRR bit + * of the ioapic. This has two effects. + * - On any sane system the read of the ioapic will + * flush writes (and acks) going to the ioapic from + * this cpu. + * - We get to see if the ACK has actually been delivered. + * + * Based on failed experiments of reprogramming the + * ioapic entry from outside of irq context starting + * with masking the ioapic entry and then polling until + * Remote IRR was clear before reprogramming the + * ioapic I don't trust the Remote IRR bit to be + * completey accurate. + * + * However there appears to be no other way to plug + * this race, so if the Remote IRR bit is not + * accurate and is causing problems then it is a hardware bug + * and you can go talk to the chipset vendor about it. + */ + if (!io_apic_level_ack_pending(irq)) + move_masked_irq(irq); + unmask_IO_APIC_irq(irq); + } +} + +static struct irq_chip ioapic_chip __read_mostly = { + .name = "IO-APIC", + .startup = startup_ioapic_irq, + .mask = mask_IO_APIC_irq, + .unmask = unmask_IO_APIC_irq, + .ack = ack_apic_edge, + .eoi = ack_apic_level, +#ifdef CONFIG_SMP + .set_affinity = set_ioapic_affinity_irq, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +static inline void init_IO_APIC_traps(void) +{ + int irq; + + /* + * NOTE! The local APIC isn't very good at handling + * multiple interrupts at the same interrupt level. + * As the interrupt level is determined by taking the + * vector number and shifting that right by 4, we + * want to spread these out a bit so that they don't + * all fall in the same interrupt level. + * + * Also, we've got to be careful not to trash gate + * 0x80, because int 0x80 is hm, kind of importantish. ;) + */ + for (irq = 0; irq < NR_IRQS ; irq++) { + int tmp = irq; + if (IO_APIC_IRQ(tmp) && !irq_cfg[tmp].vector) { + /* + * Hmm.. We don't have an entry for this, + * so default to an old-fashioned 8259 + * interrupt if we can.. + */ + if (irq < 16) + make_8259A_irq(irq); + else + /* Strange. Oh, well.. */ + irq_desc[irq].chip = &no_irq_chip; + } + } +} + +static void enable_lapic_irq (unsigned int irq) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); +} + +static void disable_lapic_irq (unsigned int irq) +{ + unsigned long v; + + v = apic_read(APIC_LVT0); + apic_write(APIC_LVT0, v | APIC_LVT_MASKED); +} + +static void ack_lapic_irq (unsigned int irq) +{ + ack_APIC_irq(); +} + +static void end_lapic_irq (unsigned int i) { /* nothing */ } + +static struct hw_interrupt_type lapic_irq_type __read_mostly = { + .name = "local-APIC", + .typename = "local-APIC-edge", + .startup = NULL, /* startup_irq() not used for IRQ0 */ + .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ + .enable = enable_lapic_irq, + .disable = disable_lapic_irq, + .ack = ack_lapic_irq, + .end = end_lapic_irq, +}; + +static void setup_nmi (void) +{ + /* + * Dirty trick to enable the NMI watchdog ... + * We put the 8259A master into AEOI mode and + * unmask on all local APICs LVT0 as NMI. + * + * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') + * is from Maciej W. Rozycki - so we do not have to EOI from + * the NMI handler or the timer interrupt. + */ + printk(KERN_INFO "activating NMI Watchdog ..."); + + enable_NMI_through_LVT0(NULL); + + printk(" done.\n"); +} + +/* + * This looks a bit hackish but it's about the only one way of sending + * a few INTA cycles to 8259As and any associated glue logic. ICR does + * not support the ExtINT mode, unfortunately. We need to send these + * cycles as some i82489DX-based boards have glue logic that keeps the + * 8259A interrupt line asserted until INTA. --macro + */ +static inline void unlock_ExtINT_logic(void) +{ + int apic, pin, i; + struct IO_APIC_route_entry entry0, entry1; + unsigned char save_control, save_freq_select; + unsigned long flags; + + pin = find_isa_irq_pin(8, mp_INT); + apic = find_isa_irq_apic(8, mp_INT); + if (pin == -1) + return; + + spin_lock_irqsave(&ioapic_lock, flags); + *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin); + *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + clear_IO_APIC_pin(apic, pin); + + memset(&entry1, 0, sizeof(entry1)); + + entry1.dest_mode = 0; /* physical delivery */ + entry1.mask = 0; /* unmask IRQ now */ + entry1.dest = hard_smp_processor_id(); + entry1.delivery_mode = dest_ExtINT; + entry1.polarity = entry0.polarity; + entry1.trigger = 0; + entry1.vector = 0; + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); + io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); + spin_unlock_irqrestore(&ioapic_lock, flags); + + save_control = CMOS_READ(RTC_CONTROL); + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); + CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, + RTC_FREQ_SELECT); + CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); + + i = 100; + while (i-- > 0) { + mdelay(10); + if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) + i -= 10; + } + + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + clear_IO_APIC_pin(apic, pin); + + spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); + io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * This code may look a bit paranoid, but it's supposed to cooperate with + * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ + * is so screwy. Thanks to Brian Perkins for testing/hacking this beast + * fanatically on his truly buggy board. + * + * FIXME: really need to revamp this for modern platforms only. + */ +static inline void check_timer(void) +{ + struct irq_cfg *cfg = irq_cfg + 0; + int apic1, pin1, apic2, pin2; + + /* + * get/set the timer IRQ vector: + */ + disable_8259A_irq(0); + assign_irq_vector(0, TARGET_CPUS); + + /* + * Subtle, code in do_timer_interrupt() expects an AEOI + * mode for the 8259A whenever interrupts are routed + * through I/O APICs. Also IRQ0 has to be enabled in + * the 8259A which implies the virtual wire has to be + * disabled in the local APIC. + */ + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); + init_8259A(1); + if (timer_over_8254 > 0) + enable_8259A_irq(0); + + pin1 = find_isa_irq_pin(0, mp_INT); + apic1 = find_isa_irq_apic(0, mp_INT); + pin2 = ioapic_i8259.pin; + apic2 = ioapic_i8259.apic; + + apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", + cfg->vector, apic1, pin1, apic2, pin2); + + if (pin1 != -1) { + /* + * Ok, does IRQ0 through the IOAPIC work? + */ + unmask_IO_APIC_irq(0); + if (!no_timer_check && timer_irq_works()) { + nmi_watchdog_default(); + if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); + setup_nmi(); + enable_8259A_irq(0); + } + if (disable_timer_pin_1 > 0) + clear_IO_APIC_pin(0, pin1); + return; + } + clear_IO_APIC_pin(apic1, pin1); + apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not " + "connected to IO-APIC\n"); + } + + apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) " + "through the 8259A ... "); + if (pin2 != -1) { + apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...", + apic2, pin2); + /* + * legacy devices should be connected to IO APIC #0 + */ + setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector); + if (timer_irq_works()) { + apic_printk(APIC_VERBOSE," works.\n"); + nmi_watchdog_default(); + if (nmi_watchdog == NMI_IO_APIC) { + setup_nmi(); + } + return; + } + /* + * Cleanup, just in case ... + */ + clear_IO_APIC_pin(apic2, pin2); + } + apic_printk(APIC_VERBOSE," failed.\n"); + + if (nmi_watchdog == NMI_IO_APIC) { + printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); + nmi_watchdog = 0; + } + + apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); + + disable_8259A_irq(0); + irq_desc[0].chip = &lapic_irq_type; + apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ + enable_8259A_irq(0); + + if (timer_irq_works()) { + apic_printk(APIC_VERBOSE," works.\n"); + return; + } + apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); + apic_printk(APIC_VERBOSE," failed.\n"); + + apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ..."); + + init_8259A(0); + make_8259A_irq(0); + apic_write(APIC_LVT0, APIC_DM_EXTINT); + + unlock_ExtINT_logic(); + + if (timer_irq_works()) { + apic_printk(APIC_VERBOSE," works.\n"); + return; + } + apic_printk(APIC_VERBOSE," failed :(.\n"); + panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n"); +} + +static int __init notimercheck(char *s) +{ + no_timer_check = 1; + return 1; +} +__setup("no_timer_check", notimercheck); + +/* + * + * IRQ's that are handled by the PIC in the MPS IOAPIC case. + * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. + * Linux doesn't really care, as it's not actually used + * for any interrupt handling anyway. + */ +#define PIC_IRQS (1<<2) + +void __init setup_IO_APIC(void) +{ + enable_IO_APIC(); + + if (acpi_ioapic) + io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ + else + io_apic_irqs = ~PIC_IRQS; + + apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); + + sync_Arb_IDs(); + setup_IO_APIC_irqs(); + init_IO_APIC_traps(); + check_timer(); + if (!acpi_ioapic) + print_IO_APIC(); +} + +struct sysfs_ioapic_data { + struct sys_device dev; + struct IO_APIC_route_entry entry[0]; +}; +static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; + +static int ioapic_suspend(struct sys_device *dev, pm_message_t state) +{ + struct IO_APIC_route_entry *entry; + struct sysfs_ioapic_data *data; + int i; + + data = container_of(dev, struct sysfs_ioapic_data, dev); + entry = data->entry; + for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) + *entry = ioapic_read_entry(dev->id, i); + + return 0; +} + +static int ioapic_resume(struct sys_device *dev) +{ + struct IO_APIC_route_entry *entry; + struct sysfs_ioapic_data *data; + unsigned long flags; + union IO_APIC_reg_00 reg_00; + int i; + + data = container_of(dev, struct sysfs_ioapic_data, dev); + entry = data->entry; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_00.raw = io_apic_read(dev->id, 0); + if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + io_apic_write(dev->id, 0, reg_00.raw); + } + spin_unlock_irqrestore(&ioapic_lock, flags); + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) + ioapic_write_entry(dev->id, i, entry[i]); + + return 0; +} + +static struct sysdev_class ioapic_sysdev_class = { + set_kset_name("ioapic"), + .suspend = ioapic_suspend, + .resume = ioapic_resume, +}; + +static int __init ioapic_init_sysfs(void) +{ + struct sys_device * dev; + int i, size, error = 0; + + error = sysdev_class_register(&ioapic_sysdev_class); + if (error) + return error; + + for (i = 0; i < nr_ioapics; i++ ) { + size = sizeof(struct sys_device) + nr_ioapic_registers[i] + * sizeof(struct IO_APIC_route_entry); + mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); + if (!mp_ioapic_data[i]) { + printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); + continue; + } + memset(mp_ioapic_data[i], 0, size); + dev = &mp_ioapic_data[i]->dev; + dev->id = i; + dev->cls = &ioapic_sysdev_class; + error = sysdev_register(dev); + if (error) { + kfree(mp_ioapic_data[i]); + mp_ioapic_data[i] = NULL; + printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); + continue; + } + } + + return 0; +} + +device_initcall(ioapic_init_sysfs); + +/* + * Dynamic irq allocate and deallocation + */ +int create_irq(void) +{ + /* Allocate an unused irq */ + int irq; + int new; + unsigned long flags; + + irq = -ENOSPC; + spin_lock_irqsave(&vector_lock, flags); + for (new = (NR_IRQS - 1); new >= 0; new--) { + if (platform_legacy_irq(new)) + continue; + if (irq_cfg[new].vector != 0) + continue; + if (__assign_irq_vector(new, TARGET_CPUS) == 0) + irq = new; + break; + } + spin_unlock_irqrestore(&vector_lock, flags); + + if (irq >= 0) { + dynamic_irq_init(irq); + } + return irq; +} + +void destroy_irq(unsigned int irq) +{ + unsigned long flags; + + dynamic_irq_cleanup(irq); + + spin_lock_irqsave(&vector_lock, flags); + __clear_irq_vector(irq); + spin_unlock_irqrestore(&vector_lock, flags); +} + +/* + * MSI mesage composition + */ +#ifdef CONFIG_PCI_MSI +static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) +{ + struct irq_cfg *cfg = irq_cfg + irq; + int err; + unsigned dest; + cpumask_t tmp; + + tmp = TARGET_CPUS; + err = assign_irq_vector(irq, tmp); + if (!err) { + cpus_and(tmp, cfg->domain, tmp); + dest = cpu_mask_to_apicid(tmp); + + msg->address_hi = MSI_ADDR_BASE_HI; + msg->address_lo = + MSI_ADDR_BASE_LO | + ((INT_DEST_MODE == 0) ? + MSI_ADDR_DEST_MODE_PHYSICAL: + MSI_ADDR_DEST_MODE_LOGICAL) | + ((INT_DELIVERY_MODE != dest_LowestPrio) ? + MSI_ADDR_REDIRECTION_CPU: + MSI_ADDR_REDIRECTION_LOWPRI) | + MSI_ADDR_DEST_ID(dest); + + msg->data = + MSI_DATA_TRIGGER_EDGE | + MSI_DATA_LEVEL_ASSERT | + ((INT_DELIVERY_MODE != dest_LowestPrio) ? + MSI_DATA_DELIVERY_FIXED: + MSI_DATA_DELIVERY_LOWPRI) | + MSI_DATA_VECTOR(cfg->vector); + } + return err; +} + +#ifdef CONFIG_SMP +static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + struct msi_msg msg; + unsigned int dest; + cpumask_t tmp; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(tmp, cfg->domain, mask); + dest = cpu_mask_to_apicid(tmp); + + read_msi_msg(irq, &msg); + + msg.data &= ~MSI_DATA_VECTOR_MASK; + msg.data |= MSI_DATA_VECTOR(cfg->vector); + msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; + msg.address_lo |= MSI_ADDR_DEST_ID(dest); + + write_msi_msg(irq, &msg); + irq_desc[irq].affinity = mask; +} +#endif /* CONFIG_SMP */ + +/* + * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, + * which implement the MSI or MSI-X Capability Structure. + */ +static struct irq_chip msi_chip = { + .name = "PCI-MSI", + .unmask = unmask_msi_irq, + .mask = mask_msi_irq, + .ack = ack_apic_edge, +#ifdef CONFIG_SMP + .set_affinity = set_msi_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ + struct msi_msg msg; + int irq, ret; + irq = create_irq(); + if (irq < 0) + return irq; + + ret = msi_compose_msg(dev, irq, &msg); + if (ret < 0) { + destroy_irq(irq); + return ret; + } + + set_irq_msi(irq, desc); + write_msi_msg(irq, &msg); + + set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); + + return 0; +} + +void arch_teardown_msi_irq(unsigned int irq) +{ + destroy_irq(irq); +} + +#endif /* CONFIG_PCI_MSI */ + +/* + * Hypertransport interrupt support + */ +#ifdef CONFIG_HT_IRQ + +#ifdef CONFIG_SMP + +static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector) +{ + struct ht_irq_msg msg; + fetch_ht_irq_msg(irq, &msg); + + msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK); + msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK); + + msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest); + msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest); + + write_ht_irq_msg(irq, &msg); +} + +static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + unsigned int dest; + cpumask_t tmp; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(tmp, cfg->domain, mask); + dest = cpu_mask_to_apicid(tmp); + + target_ht_irq(irq, dest, cfg->vector); + irq_desc[irq].affinity = mask; +} +#endif + +static struct irq_chip ht_irq_chip = { + .name = "PCI-HT", + .mask = mask_ht_irq, + .unmask = unmask_ht_irq, + .ack = ack_apic_edge, +#ifdef CONFIG_SMP + .set_affinity = set_ht_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) +{ + struct irq_cfg *cfg = irq_cfg + irq; + int err; + cpumask_t tmp; + + tmp = TARGET_CPUS; + err = assign_irq_vector(irq, tmp); + if (!err) { + struct ht_irq_msg msg; + unsigned dest; + + cpus_and(tmp, cfg->domain, tmp); + dest = cpu_mask_to_apicid(tmp); + + msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest); + + msg.address_lo = + HT_IRQ_LOW_BASE | + HT_IRQ_LOW_DEST_ID(dest) | + HT_IRQ_LOW_VECTOR(cfg->vector) | + ((INT_DEST_MODE == 0) ? + HT_IRQ_LOW_DM_PHYSICAL : + HT_IRQ_LOW_DM_LOGICAL) | + HT_IRQ_LOW_RQEOI_EDGE | + ((INT_DELIVERY_MODE != dest_LowestPrio) ? + HT_IRQ_LOW_MT_FIXED : + HT_IRQ_LOW_MT_ARBITRATED) | + HT_IRQ_LOW_IRQ_MASKED; + + write_ht_irq_msg(irq, &msg); + + set_irq_chip_and_handler_name(irq, &ht_irq_chip, + handle_edge_irq, "edge"); + } + return err; +} +#endif /* CONFIG_HT_IRQ */ + +/* -------------------------------------------------------------------------- + ACPI-based IOAPIC Configuration + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI + +#define IO_APIC_MAX_ID 0xFE + +int __init io_apic_get_redir_entries (int ioapic) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(ioapic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + + return reg_01.bits.entries; +} + + +int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity) +{ + if (!IO_APIC_IRQ(irq)) { + apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", + ioapic); + return -EINVAL; + } + + /* + * IRQs < 16 are already in the irq_2_pin[] map + */ + if (irq >= 16) + add_pin_to_irq(irq, ioapic, pin); + + setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity); + + return 0; +} + +#endif /* CONFIG_ACPI */ + + +/* + * This function currently is only a helper for the i386 smp boot process where + * we need to reprogram the ioredtbls to cater for the cpus which have come online + * so mask in all cases should simply be TARGET_CPUS + */ +#ifdef CONFIG_SMP +void __init setup_ioapic_dest(void) +{ + int pin, ioapic, irq, irq_entry; + + if (skip_ioapic_setup == 1) + return; + + for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { + for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { + irq_entry = find_irq_entry(ioapic, pin, mp_INT); + if (irq_entry == -1) + continue; + irq = pin_2_irq(irq_entry, ioapic, pin); + + /* setup_IO_APIC_irqs could fail to get vector for some device + * when you have too many devices, because at that time only boot + * cpu is online. + */ + if (!irq_cfg[irq].vector) + setup_IO_APIC_irq(ioapic, pin, irq, + irq_trigger(irq_entry), + irq_polarity(irq_entry)); + else + set_ioapic_affinity_irq(irq, TARGET_CPUS); + } + + } +} +#endif diff --git a/arch/x86/kernel/ioport_32.c b/arch/x86/kernel/ioport_32.c new file mode 100644 index 000000000000..3d310a946d76 --- /dev/null +++ b/arch/x86/kernel/ioport_32.c @@ -0,0 +1,153 @@ +/* + * linux/arch/i386/kernel/ioport.c + * + * This contains the io-permission bitmap code - written by obz, with changes + * by Linus. + */ + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/capability.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/smp.h> +#include <linux/stddef.h> +#include <linux/slab.h> +#include <linux/thread_info.h> +#include <linux/syscalls.h> + +/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */ +static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value) +{ + unsigned long mask; + unsigned long *bitmap_base = bitmap + (base / BITS_PER_LONG); + unsigned int low_index = base & (BITS_PER_LONG-1); + int length = low_index + extent; + + if (low_index != 0) { + mask = (~0UL << low_index); + if (length < BITS_PER_LONG) + mask &= ~(~0UL << length); + if (new_value) + *bitmap_base++ |= mask; + else + *bitmap_base++ &= ~mask; + length -= BITS_PER_LONG; + } + + mask = (new_value ? ~0UL : 0UL); + while (length >= BITS_PER_LONG) { + *bitmap_base++ = mask; + length -= BITS_PER_LONG; + } + + if (length > 0) { + mask = ~(~0UL << length); + if (new_value) + *bitmap_base++ |= mask; + else + *bitmap_base++ &= ~mask; + } +} + + +/* + * this changes the io permissions bitmap in the current task. + */ +asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) +{ + unsigned long i, max_long, bytes, bytes_updated; + struct thread_struct * t = ¤t->thread; + struct tss_struct * tss; + unsigned long *bitmap; + + if ((from + num <= from) || (from + num > IO_BITMAP_BITS)) + return -EINVAL; + if (turn_on && !capable(CAP_SYS_RAWIO)) + return -EPERM; + + /* + * If it's the first ioperm() call in this thread's lifetime, set the + * IO bitmap up. ioperm() is much less timing critical than clone(), + * this is why we delay this operation until now: + */ + if (!t->io_bitmap_ptr) { + bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); + if (!bitmap) + return -ENOMEM; + + memset(bitmap, 0xff, IO_BITMAP_BYTES); + t->io_bitmap_ptr = bitmap; + set_thread_flag(TIF_IO_BITMAP); + } + + /* + * do it in the per-thread copy and in the TSS ... + * + * Disable preemption via get_cpu() - we must not switch away + * because the ->io_bitmap_max value must match the bitmap + * contents: + */ + tss = &per_cpu(init_tss, get_cpu()); + + set_bitmap(t->io_bitmap_ptr, from, num, !turn_on); + + /* + * Search for a (possibly new) maximum. This is simple and stupid, + * to keep it obviously correct: + */ + max_long = 0; + for (i = 0; i < IO_BITMAP_LONGS; i++) + if (t->io_bitmap_ptr[i] != ~0UL) + max_long = i; + + bytes = (max_long + 1) * sizeof(long); + bytes_updated = max(bytes, t->io_bitmap_max); + + t->io_bitmap_max = bytes; + + /* + * Sets the lazy trigger so that the next I/O operation will + * reload the correct bitmap. + * Reset the owner so that a process switch will not set + * tss->io_bitmap_base to IO_BITMAP_OFFSET. + */ + tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY; + tss->io_bitmap_owner = NULL; + + put_cpu(); + + return 0; +} + +/* + * sys_iopl has to be used when you want to access the IO ports + * beyond the 0x3ff range: to get the full 65536 ports bitmapped + * you'd need 8kB of bitmaps/process, which is a bit excessive. + * + * Here we just change the eflags value on the stack: we allow + * only the super-user to do it. This depends on the stack-layout + * on system-call entry - see also fork() and the signal handling + * code. + */ + +asmlinkage long sys_iopl(unsigned long unused) +{ + volatile struct pt_regs * regs = (struct pt_regs *) &unused; + unsigned int level = regs->ebx; + unsigned int old = (regs->eflags >> 12) & 3; + struct thread_struct *t = ¤t->thread; + + if (level > 3) + return -EINVAL; + /* Trying to gain more privileges? */ + if (level > old) { + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + } + t->iopl = level << 12; + regs->eflags = (regs->eflags & ~X86_EFLAGS_IOPL) | t->iopl; + set_iopl_mask(t->iopl); + return 0; +} diff --git a/arch/x86/kernel/ioport_64.c b/arch/x86/kernel/ioport_64.c new file mode 100644 index 000000000000..653efa30b0f4 --- /dev/null +++ b/arch/x86/kernel/ioport_64.c @@ -0,0 +1,119 @@ +/* + * linux/arch/x86_64/kernel/ioport.c + * + * This contains the io-permission bitmap code - written by obz, with changes + * by Linus. + */ + +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/capability.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/smp.h> +#include <linux/stddef.h> +#include <linux/slab.h> +#include <linux/thread_info.h> +#include <linux/syscalls.h> + +/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */ +static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value) +{ + int i; + if (new_value) + for (i = base; i < base + extent; i++) + __set_bit(i, bitmap); + else + for (i = base; i < base + extent; i++) + clear_bit(i, bitmap); +} + +/* + * this changes the io permissions bitmap in the current task. + */ +asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) +{ + unsigned int i, max_long, bytes, bytes_updated; + struct thread_struct * t = ¤t->thread; + struct tss_struct * tss; + unsigned long *bitmap; + + if ((from + num <= from) || (from + num > IO_BITMAP_BITS)) + return -EINVAL; + if (turn_on && !capable(CAP_SYS_RAWIO)) + return -EPERM; + + /* + * If it's the first ioperm() call in this thread's lifetime, set the + * IO bitmap up. ioperm() is much less timing critical than clone(), + * this is why we delay this operation until now: + */ + if (!t->io_bitmap_ptr) { + bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); + if (!bitmap) + return -ENOMEM; + + memset(bitmap, 0xff, IO_BITMAP_BYTES); + t->io_bitmap_ptr = bitmap; + set_thread_flag(TIF_IO_BITMAP); + } + + /* + * do it in the per-thread copy and in the TSS ... + * + * Disable preemption via get_cpu() - we must not switch away + * because the ->io_bitmap_max value must match the bitmap + * contents: + */ + tss = &per_cpu(init_tss, get_cpu()); + + set_bitmap(t->io_bitmap_ptr, from, num, !turn_on); + + /* + * Search for a (possibly new) maximum. This is simple and stupid, + * to keep it obviously correct: + */ + max_long = 0; + for (i = 0; i < IO_BITMAP_LONGS; i++) + if (t->io_bitmap_ptr[i] != ~0UL) + max_long = i; + + bytes = (max_long + 1) * sizeof(long); + bytes_updated = max(bytes, t->io_bitmap_max); + + t->io_bitmap_max = bytes; + + /* Update the TSS: */ + memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated); + + put_cpu(); + + return 0; +} + +/* + * sys_iopl has to be used when you want to access the IO ports + * beyond the 0x3ff range: to get the full 65536 ports bitmapped + * you'd need 8kB of bitmaps/process, which is a bit excessive. + * + * Here we just change the eflags value on the stack: we allow + * only the super-user to do it. This depends on the stack-layout + * on system-call entry - see also fork() and the signal handling + * code. + */ + +asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs) +{ + unsigned int old = (regs->eflags >> 12) & 3; + + if (level > 3) + return -EINVAL; + /* Trying to gain more privileges? */ + if (level > old) { + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + } + regs->eflags = (regs->eflags &~ X86_EFLAGS_IOPL) | (level << 12); + return 0; +} diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c new file mode 100644 index 000000000000..dd2b97fc00b2 --- /dev/null +++ b/arch/x86/kernel/irq_32.c @@ -0,0 +1,343 @@ +/* + * linux/arch/i386/kernel/irq.c + * + * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar + * + * This file contains the lowest level x86-specific interrupt + * entry, irq-stacks and irq statistics code. All the remaining + * irq logic is done by the generic kernel/irq/ code and + * by the x86-specific irq controller code. (e.g. i8259.c and + * io_apic.c.) + */ + +#include <linux/module.h> +#include <linux/seq_file.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/notifier.h> +#include <linux/cpu.h> +#include <linux/delay.h> + +#include <asm/apic.h> +#include <asm/uaccess.h> + +DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); +EXPORT_PER_CPU_SYMBOL(irq_stat); + +DEFINE_PER_CPU(struct pt_regs *, irq_regs); +EXPORT_PER_CPU_SYMBOL(irq_regs); + +/* + * 'what should we do if we get a hw irq event on an illegal vector'. + * each architecture has to answer this themselves. + */ +void ack_bad_irq(unsigned int irq) +{ + printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq); + +#ifdef CONFIG_X86_LOCAL_APIC + /* + * Currently unexpected vectors happen only on SMP and APIC. + * We _must_ ack these because every local APIC has only N + * irq slots per priority level, and a 'hanging, unacked' IRQ + * holds up an irq slot - in excessive cases (when multiple + * unexpected vectors occur) that might lock up the APIC + * completely. + * But only ack when the APIC is enabled -AK + */ + if (cpu_has_apic) + ack_APIC_irq(); +#endif +} + +#ifdef CONFIG_4KSTACKS +/* + * per-CPU IRQ handling contexts (thread information and stack) + */ +union irq_ctx { + struct thread_info tinfo; + u32 stack[THREAD_SIZE/sizeof(u32)]; +}; + +static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; +static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; +#endif + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +fastcall unsigned int do_IRQ(struct pt_regs *regs) +{ + struct pt_regs *old_regs; + /* high bit used in ret_from_ code */ + int irq = ~regs->orig_eax; + struct irq_desc *desc = irq_desc + irq; +#ifdef CONFIG_4KSTACKS + union irq_ctx *curctx, *irqctx; + u32 *isp; +#endif + + if (unlikely((unsigned)irq >= NR_IRQS)) { + printk(KERN_EMERG "%s: cannot handle IRQ %d\n", + __FUNCTION__, irq); + BUG(); + } + + old_regs = set_irq_regs(regs); + irq_enter(); +#ifdef CONFIG_DEBUG_STACKOVERFLOW + /* Debugging check for stack overflow: is there less than 1KB free? */ + { + long esp; + + __asm__ __volatile__("andl %%esp,%0" : + "=r" (esp) : "0" (THREAD_SIZE - 1)); + if (unlikely(esp < (sizeof(struct thread_info) + STACK_WARN))) { + printk("do_IRQ: stack overflow: %ld\n", + esp - sizeof(struct thread_info)); + dump_stack(); + } + } +#endif + +#ifdef CONFIG_4KSTACKS + + curctx = (union irq_ctx *) current_thread_info(); + irqctx = hardirq_ctx[smp_processor_id()]; + + /* + * this is where we switch to the IRQ stack. However, if we are + * already using the IRQ stack (because we interrupted a hardirq + * handler) we can't do that and just have to keep using the + * current stack (which is the irq stack already after all) + */ + if (curctx != irqctx) { + int arg1, arg2, ebx; + + /* build the stack frame on the IRQ stack */ + isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); + irqctx->tinfo.task = curctx->tinfo.task; + irqctx->tinfo.previous_esp = current_stack_pointer; + + /* + * Copy the softirq bits in preempt_count so that the + * softirq checks work in the hardirq context. + */ + irqctx->tinfo.preempt_count = + (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | + (curctx->tinfo.preempt_count & SOFTIRQ_MASK); + + asm volatile( + " xchgl %%ebx,%%esp \n" + " call *%%edi \n" + " movl %%ebx,%%esp \n" + : "=a" (arg1), "=d" (arg2), "=b" (ebx) + : "0" (irq), "1" (desc), "2" (isp), + "D" (desc->handle_irq) + : "memory", "cc" + ); + } else +#endif + desc->handle_irq(irq, desc); + + irq_exit(); + set_irq_regs(old_regs); + return 1; +} + +#ifdef CONFIG_4KSTACKS + +static char softirq_stack[NR_CPUS * THREAD_SIZE] + __attribute__((__section__(".bss.page_aligned"))); + +static char hardirq_stack[NR_CPUS * THREAD_SIZE] + __attribute__((__section__(".bss.page_aligned"))); + +/* + * allocate per-cpu stacks for hardirq and for softirq processing + */ +void irq_ctx_init(int cpu) +{ + union irq_ctx *irqctx; + + if (hardirq_ctx[cpu]) + return; + + irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE]; + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + + hardirq_ctx[cpu] = irqctx; + + irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE]; + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = 0; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + + softirq_ctx[cpu] = irqctx; + + printk("CPU %u irqstacks, hard=%p soft=%p\n", + cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); +} + +void irq_ctx_exit(int cpu) +{ + hardirq_ctx[cpu] = NULL; +} + +extern asmlinkage void __do_softirq(void); + +asmlinkage void do_softirq(void) +{ + unsigned long flags; + struct thread_info *curctx; + union irq_ctx *irqctx; + u32 *isp; + + if (in_interrupt()) + return; + + local_irq_save(flags); + + if (local_softirq_pending()) { + curctx = current_thread_info(); + irqctx = softirq_ctx[smp_processor_id()]; + irqctx->tinfo.task = curctx->task; + irqctx->tinfo.previous_esp = current_stack_pointer; + + /* build the stack frame on the softirq stack */ + isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); + + asm volatile( + " xchgl %%ebx,%%esp \n" + " call __do_softirq \n" + " movl %%ebx,%%esp \n" + : "=b"(isp) + : "0"(isp) + : "memory", "cc", "edx", "ecx", "eax" + ); + /* + * Shouldnt happen, we returned above if in_interrupt(): + */ + WARN_ON_ONCE(softirq_count()); + } + + local_irq_restore(flags); +} + +EXPORT_SYMBOL(do_softirq); +#endif + +/* + * Interrupt statistics: + */ + +atomic_t irq_err_count; + +/* + * /proc/interrupts printing: + */ + +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *) v, j; + struct irqaction * action; + unsigned long flags; + + if (i == 0) { + seq_printf(p, " "); + for_each_online_cpu(j) + seq_printf(p, "CPU%-8d",j); + seq_putc(p, '\n'); + } + + if (i < NR_IRQS) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto skip; + seq_printf(p, "%3d: ",i); +#ifndef CONFIG_SMP + seq_printf(p, "%10u ", kstat_irqs(i)); +#else + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); +#endif + seq_printf(p, " %8s", irq_desc[i].chip->name); + seq_printf(p, "-%-8s", irq_desc[i].name); + seq_printf(p, " %s", action->name); + + for (action=action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + + seq_putc(p, '\n'); +skip: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } else if (i == NR_IRQS) { + seq_printf(p, "NMI: "); + for_each_online_cpu(j) + seq_printf(p, "%10u ", nmi_count(j)); + seq_putc(p, '\n'); +#ifdef CONFIG_X86_LOCAL_APIC + seq_printf(p, "LOC: "); + for_each_online_cpu(j) + seq_printf(p, "%10u ", + per_cpu(irq_stat,j).apic_timer_irqs); + seq_putc(p, '\n'); +#endif + seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); +#if defined(CONFIG_X86_IO_APIC) + seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); +#endif + } + return 0; +} + +#ifdef CONFIG_HOTPLUG_CPU +#include <mach_apic.h> + +void fixup_irqs(cpumask_t map) +{ + unsigned int irq; + static int warned; + + for (irq = 0; irq < NR_IRQS; irq++) { + cpumask_t mask; + if (irq == 2) + continue; + + cpus_and(mask, irq_desc[irq].affinity, map); + if (any_online_cpu(mask) == NR_CPUS) { + printk("Breaking affinity for irq %i\n", irq); + mask = map; + } + if (irq_desc[irq].chip->set_affinity) + irq_desc[irq].chip->set_affinity(irq, mask); + else if (irq_desc[irq].action && !(warned++)) + printk("Cannot set affinity for irq %i\n", irq); + } + +#if 0 + barrier(); + /* Ingo Molnar says: "after the IO-APIC masks have been redirected + [note the nop - the interrupt-enable boundary on x86 is two + instructions from sti] - to flush out pending hardirqs and + IPIs. After this point nothing is supposed to reach this CPU." */ + __asm__ __volatile__("sti; nop; cli"); + barrier(); +#else + /* That doesn't seem sufficient. Give it 1ms. */ + local_irq_enable(); + mdelay(1); + local_irq_disable(); +#endif +} +#endif + diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c new file mode 100644 index 000000000000..39cb3fa83ebb --- /dev/null +++ b/arch/x86/kernel/irq_64.c @@ -0,0 +1,213 @@ +/* + * linux/arch/x86_64/kernel/irq.c + * + * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar + * + * This file contains the lowest level x86_64-specific interrupt + * entry and irq statistics code. All the remaining irq logic is + * done by the generic kernel/irq/ code and in the + * x86_64-specific irq controller code. (e.g. i8259.c and + * io_apic.c.) + */ + +#include <linux/kernel_stat.h> +#include <linux/interrupt.h> +#include <linux/seq_file.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <asm/uaccess.h> +#include <asm/io_apic.h> +#include <asm/idle.h> +#include <asm/smp.h> + +atomic_t irq_err_count; + +#ifdef CONFIG_DEBUG_STACKOVERFLOW +/* + * Probabilistic stack overflow check: + * + * Only check the stack in process context, because everything else + * runs on the big interrupt stacks. Checking reliably is too expensive, + * so we just check from interrupts. + */ +static inline void stack_overflow_check(struct pt_regs *regs) +{ + u64 curbase = (u64)task_stack_page(current); + static unsigned long warned = -60*HZ; + + if (regs->rsp >= curbase && regs->rsp <= curbase + THREAD_SIZE && + regs->rsp < curbase + sizeof(struct thread_info) + 128 && + time_after(jiffies, warned + 60*HZ)) { + printk("do_IRQ: %s near stack overflow (cur:%Lx,rsp:%lx)\n", + current->comm, curbase, regs->rsp); + show_stack(NULL,NULL); + warned = jiffies; + } +} +#endif + +/* + * Generic, controller-independent functions: + */ + +int show_interrupts(struct seq_file *p, void *v) +{ + int i = *(loff_t *) v, j; + struct irqaction * action; + unsigned long flags; + + if (i == 0) { + seq_printf(p, " "); + for_each_online_cpu(j) + seq_printf(p, "CPU%-8d",j); + seq_putc(p, '\n'); + } + + if (i < NR_IRQS) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto skip; + seq_printf(p, "%3d: ",i); +#ifndef CONFIG_SMP + seq_printf(p, "%10u ", kstat_irqs(i)); +#else + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); +#endif + seq_printf(p, " %8s", irq_desc[i].chip->name); + seq_printf(p, "-%-8s", irq_desc[i].name); + + seq_printf(p, " %s", action->name); + for (action=action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + seq_putc(p, '\n'); +skip: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } else if (i == NR_IRQS) { + seq_printf(p, "NMI: "); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_pda(j)->__nmi_count); + seq_putc(p, '\n'); + seq_printf(p, "LOC: "); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_pda(j)->apic_timer_irqs); + seq_putc(p, '\n'); + seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); + } + return 0; +} + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +asmlinkage unsigned int do_IRQ(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + + /* high bit used in ret_from_ code */ + unsigned vector = ~regs->orig_rax; + unsigned irq; + + exit_idle(); + irq_enter(); + irq = __get_cpu_var(vector_irq)[vector]; + +#ifdef CONFIG_DEBUG_STACKOVERFLOW + stack_overflow_check(regs); +#endif + + if (likely(irq < NR_IRQS)) + generic_handle_irq(irq); + else { + if (!disable_apic) + ack_APIC_irq(); + + if (printk_ratelimit()) + printk(KERN_EMERG "%s: %d.%d No irq handler for vector\n", + __func__, smp_processor_id(), vector); + } + + irq_exit(); + + set_irq_regs(old_regs); + return 1; +} + +#ifdef CONFIG_HOTPLUG_CPU +void fixup_irqs(cpumask_t map) +{ + unsigned int irq; + static int warned; + + for (irq = 0; irq < NR_IRQS; irq++) { + cpumask_t mask; + int break_affinity = 0; + int set_affinity = 1; + + if (irq == 2) + continue; + + /* interrupt's are disabled at this point */ + spin_lock(&irq_desc[irq].lock); + + if (!irq_has_action(irq) || + cpus_equal(irq_desc[irq].affinity, map)) { + spin_unlock(&irq_desc[irq].lock); + continue; + } + + cpus_and(mask, irq_desc[irq].affinity, map); + if (cpus_empty(mask)) { + break_affinity = 1; + mask = map; + } + + if (irq_desc[irq].chip->mask) + irq_desc[irq].chip->mask(irq); + + if (irq_desc[irq].chip->set_affinity) + irq_desc[irq].chip->set_affinity(irq, mask); + else if (!(warned++)) + set_affinity = 0; + + if (irq_desc[irq].chip->unmask) + irq_desc[irq].chip->unmask(irq); + + spin_unlock(&irq_desc[irq].lock); + + if (break_affinity && set_affinity) + printk("Broke affinity for irq %i\n", irq); + else if (!set_affinity) + printk("Cannot set affinity for irq %i\n", irq); + } + + /* That doesn't seem sufficient. Give it 1ms. */ + local_irq_enable(); + mdelay(1); + local_irq_disable(); +} +#endif + +extern void call_softirq(void); + +asmlinkage void do_softirq(void) +{ + __u32 pending; + unsigned long flags; + + if (in_interrupt()) + return; + + local_irq_save(flags); + pending = local_softirq_pending(); + /* Switch to interrupt stack */ + if (pending) { + call_softirq(); + WARN_ON_ONCE(softirq_count()); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(do_softirq); diff --git a/arch/x86/kernel/k8.c b/arch/x86/kernel/k8.c new file mode 100644 index 000000000000..7377ccb21335 --- /dev/null +++ b/arch/x86/kernel/k8.c @@ -0,0 +1,123 @@ +/* + * Shared support code for AMD K8 northbridges and derivates. + * Copyright 2006 Andi Kleen, SUSE Labs. Subject to GPLv2. + */ +#include <linux/gfp.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <asm/k8.h> + +int num_k8_northbridges; +EXPORT_SYMBOL(num_k8_northbridges); + +static u32 *flush_words; + +struct pci_device_id k8_nb_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) }, + {} +}; +EXPORT_SYMBOL(k8_nb_ids); + +struct pci_dev **k8_northbridges; +EXPORT_SYMBOL(k8_northbridges); + +static struct pci_dev *next_k8_northbridge(struct pci_dev *dev) +{ + do { + dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); + if (!dev) + break; + } while (!pci_match_id(&k8_nb_ids[0], dev)); + return dev; +} + +int cache_k8_northbridges(void) +{ + int i; + struct pci_dev *dev; + + if (num_k8_northbridges) + return 0; + + dev = NULL; + while ((dev = next_k8_northbridge(dev)) != NULL) + num_k8_northbridges++; + + k8_northbridges = kmalloc((num_k8_northbridges + 1) * sizeof(void *), + GFP_KERNEL); + if (!k8_northbridges) + return -ENOMEM; + + if (!num_k8_northbridges) { + k8_northbridges[0] = NULL; + return 0; + } + + flush_words = kmalloc(num_k8_northbridges * sizeof(u32), GFP_KERNEL); + if (!flush_words) { + kfree(k8_northbridges); + return -ENOMEM; + } + + dev = NULL; + i = 0; + while ((dev = next_k8_northbridge(dev)) != NULL) { + k8_northbridges[i] = dev; + pci_read_config_dword(dev, 0x9c, &flush_words[i++]); + } + k8_northbridges[i] = NULL; + return 0; +} +EXPORT_SYMBOL_GPL(cache_k8_northbridges); + +/* Ignores subdevice/subvendor but as far as I can figure out + they're useless anyways */ +int __init early_is_k8_nb(u32 device) +{ + struct pci_device_id *id; + u32 vendor = device & 0xffff; + device >>= 16; + for (id = k8_nb_ids; id->vendor; id++) + if (vendor == id->vendor && device == id->device) + return 1; + return 0; +} + +void k8_flush_garts(void) +{ + int flushed, i; + unsigned long flags; + static DEFINE_SPINLOCK(gart_lock); + + /* Avoid races between AGP and IOMMU. In theory it's not needed + but I'm not sure if the hardware won't lose flush requests + when another is pending. This whole thing is so expensive anyways + that it doesn't matter to serialize more. -AK */ + spin_lock_irqsave(&gart_lock, flags); + flushed = 0; + for (i = 0; i < num_k8_northbridges; i++) { + pci_write_config_dword(k8_northbridges[i], 0x9c, + flush_words[i]|1); + flushed++; + } + for (i = 0; i < num_k8_northbridges; i++) { + u32 w; + /* Make sure the hardware actually executed the flush*/ + for (;;) { + pci_read_config_dword(k8_northbridges[i], + 0x9c, &w); + if (!(w & 1)) + break; + cpu_relax(); + } + } + spin_unlock_irqrestore(&gart_lock, flags); + if (!flushed) + printk("nothing to flush?\n"); +} +EXPORT_SYMBOL_GPL(k8_flush_garts); + diff --git a/arch/x86/kernel/kprobes_32.c b/arch/x86/kernel/kprobes_32.c new file mode 100644 index 000000000000..448a50b1324c --- /dev/null +++ b/arch/x86/kernel/kprobes_32.c @@ -0,0 +1,751 @@ +/* + * Kernel Probes (KProbes) + * arch/i386/kernel/kprobes.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2004 + * + * 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel + * Probes initial implementation ( includes contributions from + * Rusty Russell). + * 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes + * interface to access function arguments. + * 2005-May Hien Nguyen <hien@us.ibm.com>, Jim Keniston + * <jkenisto@us.ibm.com> and Prasanna S Panchamukhi + * <prasanna@in.ibm.com> added function-return probes. + */ + +#include <linux/kprobes.h> +#include <linux/ptrace.h> +#include <linux/preempt.h> +#include <linux/kdebug.h> +#include <asm/cacheflush.h> +#include <asm/desc.h> +#include <asm/uaccess.h> +#include <asm/alternative.h> + +void jprobe_return_end(void); + +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + +/* insert a jmp code */ +static __always_inline void set_jmp_op(void *from, void *to) +{ + struct __arch_jmp_op { + char op; + long raddr; + } __attribute__((packed)) *jop; + jop = (struct __arch_jmp_op *)from; + jop->raddr = (long)(to) - ((long)(from) + 5); + jop->op = RELATIVEJUMP_INSTRUCTION; +} + +/* + * returns non-zero if opcodes can be boosted. + */ +static __always_inline int can_boost(kprobe_opcode_t *opcodes) +{ +#define W(row,b0,b1,b2,b3,b4,b5,b6,b7,b8,b9,ba,bb,bc,bd,be,bf) \ + (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \ + (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \ + (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \ + (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \ + << (row % 32)) + /* + * Undefined/reserved opcodes, conditional jump, Opcode Extension + * Groups, and some special opcodes can not be boost. + */ + static const unsigned long twobyte_is_boostable[256 / 32] = { + /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ + /* ------------------------------- */ + W(0x00, 0,0,1,1,0,0,1,0,1,1,0,0,0,0,0,0)| /* 00 */ + W(0x10, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 10 */ + W(0x20, 1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0)| /* 20 */ + W(0x30, 0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 30 */ + W(0x40, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 40 */ + W(0x50, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 50 */ + W(0x60, 1,1,1,1,1,1,1,1,1,1,1,1,0,0,1,1)| /* 60 */ + W(0x70, 0,0,0,0,1,1,1,1,0,0,0,0,0,0,1,1), /* 70 */ + W(0x80, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 80 */ + W(0x90, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1), /* 90 */ + W(0xa0, 1,1,0,1,1,1,0,0,1,1,0,1,1,1,0,1)| /* a0 */ + W(0xb0, 1,1,1,1,1,1,1,1,0,0,0,1,1,1,1,1), /* b0 */ + W(0xc0, 1,1,0,0,0,0,0,0,1,1,1,1,1,1,1,1)| /* c0 */ + W(0xd0, 0,1,1,1,0,1,0,0,1,1,0,1,1,1,0,1), /* d0 */ + W(0xe0, 0,1,1,0,0,1,0,0,1,1,0,1,1,1,0,1)| /* e0 */ + W(0xf0, 0,1,1,1,0,1,0,0,1,1,1,0,1,1,1,0) /* f0 */ + /* ------------------------------- */ + /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ + }; +#undef W + kprobe_opcode_t opcode; + kprobe_opcode_t *orig_opcodes = opcodes; +retry: + if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1) + return 0; + opcode = *(opcodes++); + + /* 2nd-byte opcode */ + if (opcode == 0x0f) { + if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1) + return 0; + return test_bit(*opcodes, twobyte_is_boostable); + } + + switch (opcode & 0xf0) { + case 0x60: + if (0x63 < opcode && opcode < 0x67) + goto retry; /* prefixes */ + /* can't boost Address-size override and bound */ + return (opcode != 0x62 && opcode != 0x67); + case 0x70: + return 0; /* can't boost conditional jump */ + case 0xc0: + /* can't boost software-interruptions */ + return (0xc1 < opcode && opcode < 0xcc) || opcode == 0xcf; + case 0xd0: + /* can boost AA* and XLAT */ + return (opcode == 0xd4 || opcode == 0xd5 || opcode == 0xd7); + case 0xe0: + /* can boost in/out and absolute jmps */ + return ((opcode & 0x04) || opcode == 0xea); + case 0xf0: + if ((opcode & 0x0c) == 0 && opcode != 0xf1) + goto retry; /* lock/rep(ne) prefix */ + /* clear and set flags can be boost */ + return (opcode == 0xf5 || (0xf7 < opcode && opcode < 0xfe)); + default: + if (opcode == 0x26 || opcode == 0x36 || opcode == 0x3e) + goto retry; /* prefixes */ + /* can't boost CS override and call */ + return (opcode != 0x2e && opcode != 0x9a); + } +} + +/* + * returns non-zero if opcode modifies the interrupt flag. + */ +static int __kprobes is_IF_modifier(kprobe_opcode_t opcode) +{ + switch (opcode) { + case 0xfa: /* cli */ + case 0xfb: /* sti */ + case 0xcf: /* iret/iretd */ + case 0x9d: /* popf/popfd */ + return 1; + } + return 0; +} + +int __kprobes arch_prepare_kprobe(struct kprobe *p) +{ + /* insn: must be on special executable page on i386. */ + p->ainsn.insn = get_insn_slot(); + if (!p->ainsn.insn) + return -ENOMEM; + + memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); + p->opcode = *p->addr; + if (can_boost(p->addr)) { + p->ainsn.boostable = 0; + } else { + p->ainsn.boostable = -1; + } + return 0; +} + +void __kprobes arch_arm_kprobe(struct kprobe *p) +{ + text_poke(p->addr, ((unsigned char []){BREAKPOINT_INSTRUCTION}), 1); +} + +void __kprobes arch_disarm_kprobe(struct kprobe *p) +{ + text_poke(p->addr, &p->opcode, 1); +} + +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + mutex_lock(&kprobe_mutex); + free_insn_slot(p->ainsn.insn, (p->ainsn.boostable == 1)); + mutex_unlock(&kprobe_mutex); +} + +static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_eflags = kcb->kprobe_old_eflags; + kcb->prev_kprobe.saved_eflags = kcb->kprobe_saved_eflags; +} + +static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_eflags = kcb->prev_kprobe.old_eflags; + kcb->kprobe_saved_eflags = kcb->prev_kprobe.saved_eflags; +} + +static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_eflags = kcb->kprobe_old_eflags + = (regs->eflags & (TF_MASK | IF_MASK)); + if (is_IF_modifier(p->opcode)) + kcb->kprobe_saved_eflags &= ~IF_MASK; +} + +static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +{ + regs->eflags |= TF_MASK; + regs->eflags &= ~IF_MASK; + /*single step inline if the instruction is an int3*/ + if (p->opcode == BREAKPOINT_INSTRUCTION) + regs->eip = (unsigned long)p->addr; + else + regs->eip = (unsigned long)p->ainsn.insn; +} + +/* Called with kretprobe_lock held */ +void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, + struct pt_regs *regs) +{ + unsigned long *sara = (unsigned long *)®s->esp; + + ri->ret_addr = (kprobe_opcode_t *) *sara; + + /* Replace the return addr with trampoline addr */ + *sara = (unsigned long) &kretprobe_trampoline; +} + +/* + * Interrupts are disabled on entry as trap3 is an interrupt gate and they + * remain disabled thorough out this function. + */ +static int __kprobes kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *p; + int ret = 0; + kprobe_opcode_t *addr; + struct kprobe_ctlblk *kcb; + + addr = (kprobe_opcode_t *)(regs->eip - sizeof(kprobe_opcode_t)); + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); + + /* Check we're not actually recursing */ + if (kprobe_running()) { + p = get_kprobe(addr); + if (p) { + if (kcb->kprobe_status == KPROBE_HIT_SS && + *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { + regs->eflags &= ~TF_MASK; + regs->eflags |= kcb->kprobe_saved_eflags; + goto no_kprobe; + } + /* We have reentered the kprobe_handler(), since + * another probe was hit while within the handler. + * We here save the original kprobes variables and + * just single step on the instruction of the new probe + * without calling any user handlers. + */ + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); + kprobes_inc_nmissed_count(p); + prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_REENTER; + return 1; + } else { + if (*addr != BREAKPOINT_INSTRUCTION) { + /* The breakpoint instruction was removed by + * another cpu right after we hit, no further + * handling of this interrupt is appropriate + */ + regs->eip -= sizeof(kprobe_opcode_t); + ret = 1; + goto no_kprobe; + } + p = __get_cpu_var(current_kprobe); + if (p->break_handler && p->break_handler(p, regs)) { + goto ss_probe; + } + } + goto no_kprobe; + } + + p = get_kprobe(addr); + if (!p) { + if (*addr != BREAKPOINT_INSTRUCTION) { + /* + * The breakpoint instruction was removed right + * after we hit it. Another cpu has removed + * either a probepoint or a debugger breakpoint + * at this address. In either case, no further + * handling of this interrupt is appropriate. + * Back up over the (now missing) int3 and run + * the original instruction. + */ + regs->eip -= sizeof(kprobe_opcode_t); + ret = 1; + } + /* Not one of ours: let kernel handle it */ + goto no_kprobe; + } + + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + + if (p->pre_handler && p->pre_handler(p, regs)) + /* handler has already set things up, so skip ss setup */ + return 1; + +ss_probe: +#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM) + if (p->ainsn.boostable == 1 && !p->post_handler){ + /* Boost up -- we can execute copied instructions directly */ + reset_current_kprobe(); + regs->eip = (unsigned long)p->ainsn.insn; + preempt_enable_no_resched(); + return 1; + } +#endif + prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_HIT_SS; + return 1; + +no_kprobe: + preempt_enable_no_resched(); + return ret; +} + +/* + * For function-return probes, init_kprobes() establishes a probepoint + * here. When a retprobed function returns, this probe is hit and + * trampoline_probe_handler() runs, calling the kretprobe's handler. + */ + void __kprobes kretprobe_trampoline_holder(void) + { + asm volatile ( ".global kretprobe_trampoline\n" + "kretprobe_trampoline: \n" + " pushf\n" + /* skip cs, eip, orig_eax */ + " subl $12, %esp\n" + " pushl %fs\n" + " pushl %ds\n" + " pushl %es\n" + " pushl %eax\n" + " pushl %ebp\n" + " pushl %edi\n" + " pushl %esi\n" + " pushl %edx\n" + " pushl %ecx\n" + " pushl %ebx\n" + " movl %esp, %eax\n" + " call trampoline_handler\n" + /* move eflags to cs */ + " movl 52(%esp), %edx\n" + " movl %edx, 48(%esp)\n" + /* save true return address on eflags */ + " movl %eax, 52(%esp)\n" + " popl %ebx\n" + " popl %ecx\n" + " popl %edx\n" + " popl %esi\n" + " popl %edi\n" + " popl %ebp\n" + " popl %eax\n" + /* skip eip, orig_eax, es, ds, fs */ + " addl $20, %esp\n" + " popf\n" + " ret\n"); +} + +/* + * Called from kretprobe_trampoline + */ +fastcall void *__kprobes trampoline_handler(struct pt_regs *regs) +{ + struct kretprobe_instance *ri = NULL; + struct hlist_head *head, empty_rp; + struct hlist_node *node, *tmp; + unsigned long flags, orig_ret_address = 0; + unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + + INIT_HLIST_HEAD(&empty_rp); + spin_lock_irqsave(&kretprobe_lock, flags); + head = kretprobe_inst_table_head(current); + /* fixup registers */ + regs->xcs = __KERNEL_CS | get_kernel_rpl(); + regs->eip = trampoline_address; + regs->orig_eax = 0xffffffff; + + /* + * It is possible to have multiple instances associated with a given + * task either because an multiple functions in the call path + * have a return probe installed on them, and/or more then one return + * return probe was registered for a target function. + * + * We can handle this because: + * - instances are always inserted at the head of the list + * - when multiple return probes are registered for the same + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline + */ + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; + + if (ri->rp && ri->rp->handler){ + __get_cpu_var(current_kprobe) = &ri->rp->kp; + get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE; + ri->rp->handler(ri, regs); + __get_cpu_var(current_kprobe) = NULL; + } + + orig_ret_address = (unsigned long)ri->ret_addr; + recycle_rp_inst(ri, &empty_rp); + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + kretprobe_assert(ri, orig_ret_address, trampoline_address); + spin_unlock_irqrestore(&kretprobe_lock, flags); + + hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { + hlist_del(&ri->hlist); + kfree(ri); + } + return (void*)orig_ret_address; +} + +/* + * Called after single-stepping. p->addr is the address of the + * instruction whose first byte has been replaced by the "int 3" + * instruction. To avoid the SMP problems that can occur when we + * temporarily put back the original opcode to single-step, we + * single-stepped a copy of the instruction. The address of this + * copy is p->ainsn.insn. + * + * This function prepares to return from the post-single-step + * interrupt. We have to fix up the stack as follows: + * + * 0) Except in the case of absolute or indirect jump or call instructions, + * the new eip is relative to the copied instruction. We need to make + * it relative to the original instruction. + * + * 1) If the single-stepped instruction was pushfl, then the TF and IF + * flags are set in the just-pushed eflags, and may need to be cleared. + * + * 2) If the single-stepped instruction was a call, the return address + * that is atop the stack is the address following the copied instruction. + * We need to make it the address following the original instruction. + * + * This function also checks instruction size for preparing direct execution. + */ +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) +{ + unsigned long *tos = (unsigned long *)®s->esp; + unsigned long copy_eip = (unsigned long)p->ainsn.insn; + unsigned long orig_eip = (unsigned long)p->addr; + + regs->eflags &= ~TF_MASK; + switch (p->ainsn.insn[0]) { + case 0x9c: /* pushfl */ + *tos &= ~(TF_MASK | IF_MASK); + *tos |= kcb->kprobe_old_eflags; + break; + case 0xc2: /* iret/ret/lret */ + case 0xc3: + case 0xca: + case 0xcb: + case 0xcf: + case 0xea: /* jmp absolute -- eip is correct */ + /* eip is already adjusted, no more changes required */ + p->ainsn.boostable = 1; + goto no_change; + case 0xe8: /* call relative - Fix return addr */ + *tos = orig_eip + (*tos - copy_eip); + break; + case 0x9a: /* call absolute -- same as call absolute, indirect */ + *tos = orig_eip + (*tos - copy_eip); + goto no_change; + case 0xff: + if ((p->ainsn.insn[1] & 0x30) == 0x10) { + /* + * call absolute, indirect + * Fix return addr; eip is correct. + * But this is not boostable + */ + *tos = orig_eip + (*tos - copy_eip); + goto no_change; + } else if (((p->ainsn.insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */ + ((p->ainsn.insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */ + /* eip is correct. And this is boostable */ + p->ainsn.boostable = 1; + goto no_change; + } + default: + break; + } + + if (p->ainsn.boostable == 0) { + if ((regs->eip > copy_eip) && + (regs->eip - copy_eip) + 5 < MAX_INSN_SIZE) { + /* + * These instructions can be executed directly if it + * jumps back to correct address. + */ + set_jmp_op((void *)regs->eip, + (void *)orig_eip + (regs->eip - copy_eip)); + p->ainsn.boostable = 1; + } else { + p->ainsn.boostable = -1; + } + } + + regs->eip = orig_eip + (regs->eip - copy_eip); + +no_change: + return; +} + +/* + * Interrupts are disabled on entry as trap1 is an interrupt gate and they + * remain disabled thoroughout this function. + */ +static int __kprobes post_kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) + return 0; + + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); + } + + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_saved_eflags; + + /*Restore back the original saved kprobes variables and continue. */ + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); + goto out; + } + reset_current_kprobe(); +out: + preempt_enable_no_resched(); + + /* + * if somebody else is singlestepping across a probe point, eflags + * will have TF set, in which case, continue the remaining processing + * of do_debug, as if this is not a probe hit. + */ + if (regs->eflags & TF_MASK) + return 0; + + return 1; +} + +static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the eip points back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->eip = (unsigned long)cur->addr; + regs->eflags |= kcb->kprobe_old_eflags; + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); + preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ + if (fixup_exception(regs)) + return 1; + + /* + * fixup_exception() could not handle it, + * Let do_page_fault() fix it. + */ + break; + default: + break; + } + return 0; +} + +/* + * Wrapper routine to for handling exceptions. + */ +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + if (args->regs && user_mode_vm(args->regs)) + return ret; + + switch (val) { + case DIE_INT3: + if (kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_DEBUG: + if (post_kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_GPF: + case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && + kprobe_fault_handler(args->regs, args->trapnr)) + ret = NOTIFY_STOP; + preempt_enable(); + break; + default: + break; + } + return ret; +} + +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct jprobe *jp = container_of(p, struct jprobe, kp); + unsigned long addr; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + kcb->jprobe_saved_regs = *regs; + kcb->jprobe_saved_esp = ®s->esp; + addr = (unsigned long)(kcb->jprobe_saved_esp); + + /* + * TBD: As Linus pointed out, gcc assumes that the callee + * owns the argument space and could overwrite it, e.g. + * tailcall optimization. So, to be absolutely safe + * we also save and restore enough stack bytes to cover + * the argument area. + */ + memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, + MIN_STACK_SIZE(addr)); + regs->eflags &= ~IF_MASK; + regs->eip = (unsigned long)(jp->entry); + return 1; +} + +void __kprobes jprobe_return(void) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + asm volatile (" xchgl %%ebx,%%esp \n" + " int3 \n" + " .globl jprobe_return_end \n" + " jprobe_return_end: \n" + " nop \n"::"b" + (kcb->jprobe_saved_esp):"memory"); +} + +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + u8 *addr = (u8 *) (regs->eip - 1); + unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_esp); + struct jprobe *jp = container_of(p, struct jprobe, kp); + + if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { + if (®s->esp != kcb->jprobe_saved_esp) { + struct pt_regs *saved_regs = + container_of(kcb->jprobe_saved_esp, + struct pt_regs, esp); + printk("current esp %p does not match saved esp %p\n", + ®s->esp, kcb->jprobe_saved_esp); + printk("Saved registers for jprobe %p\n", jp); + show_registers(saved_regs); + printk("Current registers\n"); + show_registers(regs); + BUG(); + } + *regs = kcb->jprobe_saved_regs; + memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, + MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); + return 1; + } + return 0; +} + +int __kprobes arch_trampoline_kprobe(struct kprobe *p) +{ + return 0; +} + +int __init arch_init_kprobes(void) +{ + return 0; +} diff --git a/arch/x86/kernel/kprobes_64.c b/arch/x86/kernel/kprobes_64.c new file mode 100644 index 000000000000..a30e004682e2 --- /dev/null +++ b/arch/x86/kernel/kprobes_64.c @@ -0,0 +1,749 @@ +/* + * Kernel Probes (KProbes) + * arch/x86_64/kernel/kprobes.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2004 + * + * 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel + * Probes initial implementation ( includes contributions from + * Rusty Russell). + * 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes + * interface to access function arguments. + * 2004-Oct Jim Keniston <kenistoj@us.ibm.com> and Prasanna S Panchamukhi + * <prasanna@in.ibm.com> adapted for x86_64 + * 2005-Mar Roland McGrath <roland@redhat.com> + * Fixed to handle %rip-relative addressing mode correctly. + * 2005-May Rusty Lynch <rusty.lynch@intel.com> + * Added function return probes functionality + */ + +#include <linux/kprobes.h> +#include <linux/ptrace.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/preempt.h> +#include <linux/module.h> +#include <linux/kdebug.h> + +#include <asm/pgtable.h> +#include <asm/uaccess.h> +#include <asm/alternative.h> + +void jprobe_return_end(void); +static void __kprobes arch_copy_kprobe(struct kprobe *p); + +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + +/* + * returns non-zero if opcode modifies the interrupt flag. + */ +static __always_inline int is_IF_modifier(kprobe_opcode_t *insn) +{ + switch (*insn) { + case 0xfa: /* cli */ + case 0xfb: /* sti */ + case 0xcf: /* iret/iretd */ + case 0x9d: /* popf/popfd */ + return 1; + } + + if (*insn >= 0x40 && *insn <= 0x4f && *++insn == 0xcf) + return 1; + return 0; +} + +int __kprobes arch_prepare_kprobe(struct kprobe *p) +{ + /* insn: must be on special executable page on x86_64. */ + p->ainsn.insn = get_insn_slot(); + if (!p->ainsn.insn) { + return -ENOMEM; + } + arch_copy_kprobe(p); + return 0; +} + +/* + * Determine if the instruction uses the %rip-relative addressing mode. + * If it does, return the address of the 32-bit displacement word. + * If not, return null. + */ +static s32 __kprobes *is_riprel(u8 *insn) +{ +#define W(row,b0,b1,b2,b3,b4,b5,b6,b7,b8,b9,ba,bb,bc,bd,be,bf) \ + (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \ + (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \ + (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \ + (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \ + << (row % 64)) + static const u64 onebyte_has_modrm[256 / 64] = { + /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ + /* ------------------------------- */ + W(0x00, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 00 */ + W(0x10, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 10 */ + W(0x20, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 20 */ + W(0x30, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0), /* 30 */ + W(0x40, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 40 */ + W(0x50, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 50 */ + W(0x60, 0,0,1,1,0,0,0,0,0,1,0,1,0,0,0,0)| /* 60 */ + W(0x70, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 70 */ + W(0x80, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 80 */ + W(0x90, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 90 */ + W(0xa0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* a0 */ + W(0xb0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* b0 */ + W(0xc0, 1,1,0,0,1,1,1,1,0,0,0,0,0,0,0,0)| /* c0 */ + W(0xd0, 1,1,1,1,0,0,0,0,1,1,1,1,1,1,1,1)| /* d0 */ + W(0xe0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* e0 */ + W(0xf0, 0,0,0,0,0,0,1,1,0,0,0,0,0,0,1,1) /* f0 */ + /* ------------------------------- */ + /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ + }; + static const u64 twobyte_has_modrm[256 / 64] = { + /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ + /* ------------------------------- */ + W(0x00, 1,1,1,1,0,0,0,0,0,0,0,0,0,1,0,1)| /* 0f */ + W(0x10, 1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0)| /* 1f */ + W(0x20, 1,1,1,1,1,0,1,0,1,1,1,1,1,1,1,1)| /* 2f */ + W(0x30, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 3f */ + W(0x40, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 4f */ + W(0x50, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 5f */ + W(0x60, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 6f */ + W(0x70, 1,1,1,1,1,1,1,0,0,0,0,0,1,1,1,1), /* 7f */ + W(0x80, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 8f */ + W(0x90, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 9f */ + W(0xa0, 0,0,0,1,1,1,1,1,0,0,0,1,1,1,1,1)| /* af */ + W(0xb0, 1,1,1,1,1,1,1,1,0,0,1,1,1,1,1,1), /* bf */ + W(0xc0, 1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0)| /* cf */ + W(0xd0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* df */ + W(0xe0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* ef */ + W(0xf0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0) /* ff */ + /* ------------------------------- */ + /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ + }; +#undef W + int need_modrm; + + /* Skip legacy instruction prefixes. */ + while (1) { + switch (*insn) { + case 0x66: + case 0x67: + case 0x2e: + case 0x3e: + case 0x26: + case 0x64: + case 0x65: + case 0x36: + case 0xf0: + case 0xf3: + case 0xf2: + ++insn; + continue; + } + break; + } + + /* Skip REX instruction prefix. */ + if ((*insn & 0xf0) == 0x40) + ++insn; + + if (*insn == 0x0f) { /* Two-byte opcode. */ + ++insn; + need_modrm = test_bit(*insn, twobyte_has_modrm); + } else { /* One-byte opcode. */ + need_modrm = test_bit(*insn, onebyte_has_modrm); + } + + if (need_modrm) { + u8 modrm = *++insn; + if ((modrm & 0xc7) == 0x05) { /* %rip+disp32 addressing mode */ + /* Displacement follows ModRM byte. */ + return (s32 *) ++insn; + } + } + + /* No %rip-relative addressing mode here. */ + return NULL; +} + +static void __kprobes arch_copy_kprobe(struct kprobe *p) +{ + s32 *ripdisp; + memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE); + ripdisp = is_riprel(p->ainsn.insn); + if (ripdisp) { + /* + * The copied instruction uses the %rip-relative + * addressing mode. Adjust the displacement for the + * difference between the original location of this + * instruction and the location of the copy that will + * actually be run. The tricky bit here is making sure + * that the sign extension happens correctly in this + * calculation, since we need a signed 32-bit result to + * be sign-extended to 64 bits when it's added to the + * %rip value and yield the same 64-bit result that the + * sign-extension of the original signed 32-bit + * displacement would have given. + */ + s64 disp = (u8 *) p->addr + *ripdisp - (u8 *) p->ainsn.insn; + BUG_ON((s64) (s32) disp != disp); /* Sanity check. */ + *ripdisp = disp; + } + p->opcode = *p->addr; +} + +void __kprobes arch_arm_kprobe(struct kprobe *p) +{ + text_poke(p->addr, ((unsigned char []){BREAKPOINT_INSTRUCTION}), 1); +} + +void __kprobes arch_disarm_kprobe(struct kprobe *p) +{ + text_poke(p->addr, &p->opcode, 1); +} + +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + mutex_lock(&kprobe_mutex); + free_insn_slot(p->ainsn.insn, 0); + mutex_unlock(&kprobe_mutex); +} + +static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_rflags = kcb->kprobe_old_rflags; + kcb->prev_kprobe.saved_rflags = kcb->kprobe_saved_rflags; +} + +static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_rflags = kcb->prev_kprobe.old_rflags; + kcb->kprobe_saved_rflags = kcb->prev_kprobe.saved_rflags; +} + +static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_rflags = kcb->kprobe_old_rflags + = (regs->eflags & (TF_MASK | IF_MASK)); + if (is_IF_modifier(p->ainsn.insn)) + kcb->kprobe_saved_rflags &= ~IF_MASK; +} + +static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +{ + regs->eflags |= TF_MASK; + regs->eflags &= ~IF_MASK; + /*single step inline if the instruction is an int3*/ + if (p->opcode == BREAKPOINT_INSTRUCTION) + regs->rip = (unsigned long)p->addr; + else + regs->rip = (unsigned long)p->ainsn.insn; +} + +/* Called with kretprobe_lock held */ +void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, + struct pt_regs *regs) +{ + unsigned long *sara = (unsigned long *)regs->rsp; + + ri->ret_addr = (kprobe_opcode_t *) *sara; + /* Replace the return addr with trampoline addr */ + *sara = (unsigned long) &kretprobe_trampoline; +} + +int __kprobes kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *p; + int ret = 0; + kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t)); + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); + + /* Check we're not actually recursing */ + if (kprobe_running()) { + p = get_kprobe(addr); + if (p) { + if (kcb->kprobe_status == KPROBE_HIT_SS && + *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { + regs->eflags &= ~TF_MASK; + regs->eflags |= kcb->kprobe_saved_rflags; + goto no_kprobe; + } else if (kcb->kprobe_status == KPROBE_HIT_SSDONE) { + /* TODO: Provide re-entrancy from + * post_kprobes_handler() and avoid exception + * stack corruption while single-stepping on + * the instruction of the new probe. + */ + arch_disarm_kprobe(p); + regs->rip = (unsigned long)p->addr; + reset_current_kprobe(); + ret = 1; + } else { + /* We have reentered the kprobe_handler(), since + * another probe was hit while within the + * handler. We here save the original kprobe + * variables and just single step on instruction + * of the new probe without calling any user + * handlers. + */ + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); + kprobes_inc_nmissed_count(p); + prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_REENTER; + return 1; + } + } else { + if (*addr != BREAKPOINT_INSTRUCTION) { + /* The breakpoint instruction was removed by + * another cpu right after we hit, no further + * handling of this interrupt is appropriate + */ + regs->rip = (unsigned long)addr; + ret = 1; + goto no_kprobe; + } + p = __get_cpu_var(current_kprobe); + if (p->break_handler && p->break_handler(p, regs)) { + goto ss_probe; + } + } + goto no_kprobe; + } + + p = get_kprobe(addr); + if (!p) { + if (*addr != BREAKPOINT_INSTRUCTION) { + /* + * The breakpoint instruction was removed right + * after we hit it. Another cpu has removed + * either a probepoint or a debugger breakpoint + * at this address. In either case, no further + * handling of this interrupt is appropriate. + * Back up over the (now missing) int3 and run + * the original instruction. + */ + regs->rip = (unsigned long)addr; + ret = 1; + } + /* Not one of ours: let kernel handle it */ + goto no_kprobe; + } + + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + + if (p->pre_handler && p->pre_handler(p, regs)) + /* handler has already set things up, so skip ss setup */ + return 1; + +ss_probe: + prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_HIT_SS; + return 1; + +no_kprobe: + preempt_enable_no_resched(); + return ret; +} + +/* + * For function-return probes, init_kprobes() establishes a probepoint + * here. When a retprobed function returns, this probe is hit and + * trampoline_probe_handler() runs, calling the kretprobe's handler. + */ + void kretprobe_trampoline_holder(void) + { + asm volatile ( ".global kretprobe_trampoline\n" + "kretprobe_trampoline: \n" + "nop\n"); + } + +/* + * Called when we hit the probe point at kretprobe_trampoline + */ +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kretprobe_instance *ri = NULL; + struct hlist_head *head, empty_rp; + struct hlist_node *node, *tmp; + unsigned long flags, orig_ret_address = 0; + unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + + INIT_HLIST_HEAD(&empty_rp); + spin_lock_irqsave(&kretprobe_lock, flags); + head = kretprobe_inst_table_head(current); + + /* + * It is possible to have multiple instances associated with a given + * task either because an multiple functions in the call path + * have a return probe installed on them, and/or more then one return + * return probe was registered for a target function. + * + * We can handle this because: + * - instances are always inserted at the head of the list + * - when multiple return probes are registered for the same + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline + */ + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; + + if (ri->rp && ri->rp->handler) + ri->rp->handler(ri, regs); + + orig_ret_address = (unsigned long)ri->ret_addr; + recycle_rp_inst(ri, &empty_rp); + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + kretprobe_assert(ri, orig_ret_address, trampoline_address); + regs->rip = orig_ret_address; + + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); + preempt_enable_no_resched(); + + hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { + hlist_del(&ri->hlist); + kfree(ri); + } + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ + return 1; +} + +/* + * Called after single-stepping. p->addr is the address of the + * instruction whose first byte has been replaced by the "int 3" + * instruction. To avoid the SMP problems that can occur when we + * temporarily put back the original opcode to single-step, we + * single-stepped a copy of the instruction. The address of this + * copy is p->ainsn.insn. + * + * This function prepares to return from the post-single-step + * interrupt. We have to fix up the stack as follows: + * + * 0) Except in the case of absolute or indirect jump or call instructions, + * the new rip is relative to the copied instruction. We need to make + * it relative to the original instruction. + * + * 1) If the single-stepped instruction was pushfl, then the TF and IF + * flags are set in the just-pushed eflags, and may need to be cleared. + * + * 2) If the single-stepped instruction was a call, the return address + * that is atop the stack is the address following the copied instruction. + * We need to make it the address following the original instruction. + */ +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, struct kprobe_ctlblk *kcb) +{ + unsigned long *tos = (unsigned long *)regs->rsp; + unsigned long next_rip = 0; + unsigned long copy_rip = (unsigned long)p->ainsn.insn; + unsigned long orig_rip = (unsigned long)p->addr; + kprobe_opcode_t *insn = p->ainsn.insn; + + /*skip the REX prefix*/ + if (*insn >= 0x40 && *insn <= 0x4f) + insn++; + + switch (*insn) { + case 0x9c: /* pushfl */ + *tos &= ~(TF_MASK | IF_MASK); + *tos |= kcb->kprobe_old_rflags; + break; + case 0xc3: /* ret/lret */ + case 0xcb: + case 0xc2: + case 0xca: + regs->eflags &= ~TF_MASK; + /* rip is already adjusted, no more changes required*/ + return; + case 0xe8: /* call relative - Fix return addr */ + *tos = orig_rip + (*tos - copy_rip); + break; + case 0xff: + if ((insn[1] & 0x30) == 0x10) { + /* call absolute, indirect */ + /* Fix return addr; rip is correct. */ + next_rip = regs->rip; + *tos = orig_rip + (*tos - copy_rip); + } else if (((insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */ + ((insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */ + /* rip is correct. */ + next_rip = regs->rip; + } + break; + case 0xea: /* jmp absolute -- rip is correct */ + next_rip = regs->rip; + break; + default: + break; + } + + regs->eflags &= ~TF_MASK; + if (next_rip) { + regs->rip = next_rip; + } else { + regs->rip = orig_rip + (regs->rip - copy_rip); + } +} + +int __kprobes post_kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) + return 0; + + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); + } + + resume_execution(cur, regs, kcb); + regs->eflags |= kcb->kprobe_saved_rflags; + + /* Restore the original saved kprobes variables and continue. */ + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); + goto out; + } + reset_current_kprobe(); +out: + preempt_enable_no_resched(); + + /* + * if somebody else is singlestepping across a probe point, eflags + * will have TF set, in which case, continue the remaining processing + * of do_debug, as if this is not a probe hit. + */ + if (regs->eflags & TF_MASK) + return 0; + + return 1; +} + +int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + const struct exception_table_entry *fixup; + + switch(kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single + * stepped caused a page fault. We reset the current + * kprobe and the rip points back to the probe address + * and allow the page fault handler to continue as a + * normal page fault. + */ + regs->rip = (unsigned long)cur->addr; + regs->eflags |= kcb->kprobe_old_rflags; + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); + preempt_enable_no_resched(); + break; + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We increment the nmissed count for accounting, + * we can also use npre/npostfault count for accouting + * these specific fault cases. + */ + kprobes_inc_nmissed_count(cur); + + /* + * We come here because instructions in the pre/post + * handler caused the page_fault, this could happen + * if handler tries to access user space by + * copy_from_user(), get_user() etc. Let the + * user-specified handler try to fix it first. + */ + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + /* + * In case the user-specified fault handler returned + * zero, try to fix up. + */ + fixup = search_exception_tables(regs->rip); + if (fixup) { + regs->rip = fixup->fixup; + return 1; + } + + /* + * fixup() could not handle it, + * Let do_page_fault() fix it. + */ + break; + default: + break; + } + return 0; +} + +/* + * Wrapper routine for handling exceptions. + */ +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + if (args->regs && user_mode(args->regs)) + return ret; + + switch (val) { + case DIE_INT3: + if (kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_DEBUG: + if (post_kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_GPF: + case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && + kprobe_fault_handler(args->regs, args->trapnr)) + ret = NOTIFY_STOP; + preempt_enable(); + break; + default: + break; + } + return ret; +} + +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct jprobe *jp = container_of(p, struct jprobe, kp); + unsigned long addr; + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + kcb->jprobe_saved_regs = *regs; + kcb->jprobe_saved_rsp = (long *) regs->rsp; + addr = (unsigned long)(kcb->jprobe_saved_rsp); + /* + * As Linus pointed out, gcc assumes that the callee + * owns the argument space and could overwrite it, e.g. + * tailcall optimization. So, to be absolutely safe + * we also save and restore enough stack bytes to cover + * the argument area. + */ + memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, + MIN_STACK_SIZE(addr)); + regs->eflags &= ~IF_MASK; + regs->rip = (unsigned long)(jp->entry); + return 1; +} + +void __kprobes jprobe_return(void) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + asm volatile (" xchg %%rbx,%%rsp \n" + " int3 \n" + " .globl jprobe_return_end \n" + " jprobe_return_end: \n" + " nop \n"::"b" + (kcb->jprobe_saved_rsp):"memory"); +} + +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + u8 *addr = (u8 *) (regs->rip - 1); + unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_rsp); + struct jprobe *jp = container_of(p, struct jprobe, kp); + + if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { + if ((long *)regs->rsp != kcb->jprobe_saved_rsp) { + struct pt_regs *saved_regs = + container_of(kcb->jprobe_saved_rsp, + struct pt_regs, rsp); + printk("current rsp %p does not match saved rsp %p\n", + (long *)regs->rsp, kcb->jprobe_saved_rsp); + printk("Saved registers for jprobe %p\n", jp); + show_registers(saved_regs); + printk("Current registers\n"); + show_registers(regs); + BUG(); + } + *regs = kcb->jprobe_saved_regs; + memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, + MIN_STACK_SIZE(stack_addr)); + preempt_enable_no_resched(); + return 1; + } + return 0; +} + +static struct kprobe trampoline_p = { + .addr = (kprobe_opcode_t *) &kretprobe_trampoline, + .pre_handler = trampoline_probe_handler +}; + +int __init arch_init_kprobes(void) +{ + return register_kprobe(&trampoline_p); +} + +int __kprobes arch_trampoline_kprobe(struct kprobe *p) +{ + if (p->addr == (kprobe_opcode_t *)&kretprobe_trampoline) + return 1; + + return 0; +} diff --git a/arch/x86/kernel/ldt_32.c b/arch/x86/kernel/ldt_32.c new file mode 100644 index 000000000000..e0b2d17f4f10 --- /dev/null +++ b/arch/x86/kernel/ldt_32.c @@ -0,0 +1,250 @@ +/* + * linux/arch/i386/kernel/ldt.c + * + * Copyright (C) 1992 Krishna Balasubramanian and Linus Torvalds + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> + +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/ldt.h> +#include <asm/desc.h> +#include <asm/mmu_context.h> + +#ifdef CONFIG_SMP /* avoids "defined but not used" warnig */ +static void flush_ldt(void *null) +{ + if (current->active_mm) + load_LDT(¤t->active_mm->context); +} +#endif + +static int alloc_ldt(mm_context_t *pc, int mincount, int reload) +{ + void *oldldt; + void *newldt; + int oldsize; + + if (mincount <= pc->size) + return 0; + oldsize = pc->size; + mincount = (mincount+511)&(~511); + if (mincount*LDT_ENTRY_SIZE > PAGE_SIZE) + newldt = vmalloc(mincount*LDT_ENTRY_SIZE); + else + newldt = kmalloc(mincount*LDT_ENTRY_SIZE, GFP_KERNEL); + + if (!newldt) + return -ENOMEM; + + if (oldsize) + memcpy(newldt, pc->ldt, oldsize*LDT_ENTRY_SIZE); + oldldt = pc->ldt; + memset(newldt+oldsize*LDT_ENTRY_SIZE, 0, (mincount-oldsize)*LDT_ENTRY_SIZE); + pc->ldt = newldt; + wmb(); + pc->size = mincount; + wmb(); + + if (reload) { +#ifdef CONFIG_SMP + cpumask_t mask; + preempt_disable(); + load_LDT(pc); + mask = cpumask_of_cpu(smp_processor_id()); + if (!cpus_equal(current->mm->cpu_vm_mask, mask)) + smp_call_function(flush_ldt, NULL, 1, 1); + preempt_enable(); +#else + load_LDT(pc); +#endif + } + if (oldsize) { + if (oldsize*LDT_ENTRY_SIZE > PAGE_SIZE) + vfree(oldldt); + else + kfree(oldldt); + } + return 0; +} + +static inline int copy_ldt(mm_context_t *new, mm_context_t *old) +{ + int err = alloc_ldt(new, old->size, 0); + if (err < 0) + return err; + memcpy(new->ldt, old->ldt, old->size*LDT_ENTRY_SIZE); + return 0; +} + +/* + * we do not have to muck with descriptors here, that is + * done in switch_mm() as needed. + */ +int init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + struct mm_struct * old_mm; + int retval = 0; + + init_MUTEX(&mm->context.sem); + mm->context.size = 0; + old_mm = current->mm; + if (old_mm && old_mm->context.size > 0) { + down(&old_mm->context.sem); + retval = copy_ldt(&mm->context, &old_mm->context); + up(&old_mm->context.sem); + } + return retval; +} + +/* + * No need to lock the MM as we are the last user + */ +void destroy_context(struct mm_struct *mm) +{ + if (mm->context.size) { + if (mm == current->active_mm) + clear_LDT(); + if (mm->context.size*LDT_ENTRY_SIZE > PAGE_SIZE) + vfree(mm->context.ldt); + else + kfree(mm->context.ldt); + mm->context.size = 0; + } +} + +static int read_ldt(void __user * ptr, unsigned long bytecount) +{ + int err; + unsigned long size; + struct mm_struct * mm = current->mm; + + if (!mm->context.size) + return 0; + if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES) + bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES; + + down(&mm->context.sem); + size = mm->context.size*LDT_ENTRY_SIZE; + if (size > bytecount) + size = bytecount; + + err = 0; + if (copy_to_user(ptr, mm->context.ldt, size)) + err = -EFAULT; + up(&mm->context.sem); + if (err < 0) + goto error_return; + if (size != bytecount) { + /* zero-fill the rest */ + if (clear_user(ptr+size, bytecount-size) != 0) { + err = -EFAULT; + goto error_return; + } + } + return bytecount; +error_return: + return err; +} + +static int read_default_ldt(void __user * ptr, unsigned long bytecount) +{ + int err; + unsigned long size; + + err = 0; + size = 5*sizeof(struct desc_struct); + if (size > bytecount) + size = bytecount; + + err = size; + if (clear_user(ptr, size)) + err = -EFAULT; + + return err; +} + +static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode) +{ + struct mm_struct * mm = current->mm; + __u32 entry_1, entry_2; + int error; + struct user_desc ldt_info; + + error = -EINVAL; + if (bytecount != sizeof(ldt_info)) + goto out; + error = -EFAULT; + if (copy_from_user(&ldt_info, ptr, sizeof(ldt_info))) + goto out; + + error = -EINVAL; + if (ldt_info.entry_number >= LDT_ENTRIES) + goto out; + if (ldt_info.contents == 3) { + if (oldmode) + goto out; + if (ldt_info.seg_not_present == 0) + goto out; + } + + down(&mm->context.sem); + if (ldt_info.entry_number >= mm->context.size) { + error = alloc_ldt(¤t->mm->context, ldt_info.entry_number+1, 1); + if (error < 0) + goto out_unlock; + } + + /* Allow LDTs to be cleared by the user. */ + if (ldt_info.base_addr == 0 && ldt_info.limit == 0) { + if (oldmode || LDT_empty(&ldt_info)) { + entry_1 = 0; + entry_2 = 0; + goto install; + } + } + + entry_1 = LDT_entry_a(&ldt_info); + entry_2 = LDT_entry_b(&ldt_info); + if (oldmode) + entry_2 &= ~(1 << 20); + + /* Install the new entry ... */ +install: + write_ldt_entry(mm->context.ldt, ldt_info.entry_number, entry_1, entry_2); + error = 0; + +out_unlock: + up(&mm->context.sem); +out: + return error; +} + +asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +{ + int ret = -ENOSYS; + + switch (func) { + case 0: + ret = read_ldt(ptr, bytecount); + break; + case 1: + ret = write_ldt(ptr, bytecount, 1); + break; + case 2: + ret = read_default_ldt(ptr, bytecount); + break; + case 0x11: + ret = write_ldt(ptr, bytecount, 0); + break; + } + return ret; +} diff --git a/arch/x86/kernel/ldt_64.c b/arch/x86/kernel/ldt_64.c new file mode 100644 index 000000000000..bc9ffd5c19cc --- /dev/null +++ b/arch/x86/kernel/ldt_64.c @@ -0,0 +1,252 @@ +/* + * linux/arch/x86_64/kernel/ldt.c + * + * Copyright (C) 1992 Krishna Balasubramanian and Linus Torvalds + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + * Copyright (C) 2002 Andi Kleen + * + * This handles calls from both 32bit and 64bit mode. + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> + +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/ldt.h> +#include <asm/desc.h> +#include <asm/proto.h> + +#ifdef CONFIG_SMP /* avoids "defined but not used" warnig */ +static void flush_ldt(void *null) +{ + if (current->active_mm) + load_LDT(¤t->active_mm->context); +} +#endif + +static int alloc_ldt(mm_context_t *pc, unsigned mincount, int reload) +{ + void *oldldt; + void *newldt; + unsigned oldsize; + + if (mincount <= (unsigned)pc->size) + return 0; + oldsize = pc->size; + mincount = (mincount+511)&(~511); + if (mincount*LDT_ENTRY_SIZE > PAGE_SIZE) + newldt = vmalloc(mincount*LDT_ENTRY_SIZE); + else + newldt = kmalloc(mincount*LDT_ENTRY_SIZE, GFP_KERNEL); + + if (!newldt) + return -ENOMEM; + + if (oldsize) + memcpy(newldt, pc->ldt, oldsize*LDT_ENTRY_SIZE); + oldldt = pc->ldt; + memset(newldt+oldsize*LDT_ENTRY_SIZE, 0, (mincount-oldsize)*LDT_ENTRY_SIZE); + wmb(); + pc->ldt = newldt; + wmb(); + pc->size = mincount; + wmb(); + if (reload) { +#ifdef CONFIG_SMP + cpumask_t mask; + + preempt_disable(); + mask = cpumask_of_cpu(smp_processor_id()); + load_LDT(pc); + if (!cpus_equal(current->mm->cpu_vm_mask, mask)) + smp_call_function(flush_ldt, NULL, 1, 1); + preempt_enable(); +#else + load_LDT(pc); +#endif + } + if (oldsize) { + if (oldsize*LDT_ENTRY_SIZE > PAGE_SIZE) + vfree(oldldt); + else + kfree(oldldt); + } + return 0; +} + +static inline int copy_ldt(mm_context_t *new, mm_context_t *old) +{ + int err = alloc_ldt(new, old->size, 0); + if (err < 0) + return err; + memcpy(new->ldt, old->ldt, old->size*LDT_ENTRY_SIZE); + return 0; +} + +/* + * we do not have to muck with descriptors here, that is + * done in switch_mm() as needed. + */ +int init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + struct mm_struct * old_mm; + int retval = 0; + + init_MUTEX(&mm->context.sem); + mm->context.size = 0; + old_mm = current->mm; + if (old_mm && old_mm->context.size > 0) { + down(&old_mm->context.sem); + retval = copy_ldt(&mm->context, &old_mm->context); + up(&old_mm->context.sem); + } + return retval; +} + +/* + * + * Don't touch the LDT register - we're already in the next thread. + */ +void destroy_context(struct mm_struct *mm) +{ + if (mm->context.size) { + if ((unsigned)mm->context.size*LDT_ENTRY_SIZE > PAGE_SIZE) + vfree(mm->context.ldt); + else + kfree(mm->context.ldt); + mm->context.size = 0; + } +} + +static int read_ldt(void __user * ptr, unsigned long bytecount) +{ + int err; + unsigned long size; + struct mm_struct * mm = current->mm; + + if (!mm->context.size) + return 0; + if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES) + bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES; + + down(&mm->context.sem); + size = mm->context.size*LDT_ENTRY_SIZE; + if (size > bytecount) + size = bytecount; + + err = 0; + if (copy_to_user(ptr, mm->context.ldt, size)) + err = -EFAULT; + up(&mm->context.sem); + if (err < 0) + goto error_return; + if (size != bytecount) { + /* zero-fill the rest */ + if (clear_user(ptr+size, bytecount-size) != 0) { + err = -EFAULT; + goto error_return; + } + } + return bytecount; +error_return: + return err; +} + +static int read_default_ldt(void __user * ptr, unsigned long bytecount) +{ + /* Arbitrary number */ + /* x86-64 default LDT is all zeros */ + if (bytecount > 128) + bytecount = 128; + if (clear_user(ptr, bytecount)) + return -EFAULT; + return bytecount; +} + +static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode) +{ + struct task_struct *me = current; + struct mm_struct * mm = me->mm; + __u32 entry_1, entry_2, *lp; + int error; + struct user_desc ldt_info; + + error = -EINVAL; + + if (bytecount != sizeof(ldt_info)) + goto out; + error = -EFAULT; + if (copy_from_user(&ldt_info, ptr, bytecount)) + goto out; + + error = -EINVAL; + if (ldt_info.entry_number >= LDT_ENTRIES) + goto out; + if (ldt_info.contents == 3) { + if (oldmode) + goto out; + if (ldt_info.seg_not_present == 0) + goto out; + } + + down(&mm->context.sem); + if (ldt_info.entry_number >= (unsigned)mm->context.size) { + error = alloc_ldt(¤t->mm->context, ldt_info.entry_number+1, 1); + if (error < 0) + goto out_unlock; + } + + lp = (__u32 *) ((ldt_info.entry_number << 3) + (char *) mm->context.ldt); + + /* Allow LDTs to be cleared by the user. */ + if (ldt_info.base_addr == 0 && ldt_info.limit == 0) { + if (oldmode || LDT_empty(&ldt_info)) { + entry_1 = 0; + entry_2 = 0; + goto install; + } + } + + entry_1 = LDT_entry_a(&ldt_info); + entry_2 = LDT_entry_b(&ldt_info); + if (oldmode) + entry_2 &= ~(1 << 20); + + /* Install the new entry ... */ +install: + *lp = entry_1; + *(lp+1) = entry_2; + error = 0; + +out_unlock: + up(&mm->context.sem); +out: + return error; +} + +asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) +{ + int ret = -ENOSYS; + + switch (func) { + case 0: + ret = read_ldt(ptr, bytecount); + break; + case 1: + ret = write_ldt(ptr, bytecount, 1); + break; + case 2: + ret = read_default_ldt(ptr, bytecount); + break; + case 0x11: + ret = write_ldt(ptr, bytecount, 0); + break; + } + return ret; +} diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c new file mode 100644 index 000000000000..91966bafb3dc --- /dev/null +++ b/arch/x86/kernel/machine_kexec_32.c @@ -0,0 +1,171 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + * Copyright (C) 2002-2005 Eric Biederman <ebiederm@xmission.com> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/mm.h> +#include <linux/kexec.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/tlbflush.h> +#include <asm/mmu_context.h> +#include <asm/io.h> +#include <asm/apic.h> +#include <asm/cpufeature.h> +#include <asm/desc.h> +#include <asm/system.h> + +#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) +static u32 kexec_pgd[1024] PAGE_ALIGNED; +#ifdef CONFIG_X86_PAE +static u32 kexec_pmd0[1024] PAGE_ALIGNED; +static u32 kexec_pmd1[1024] PAGE_ALIGNED; +#endif +static u32 kexec_pte0[1024] PAGE_ALIGNED; +static u32 kexec_pte1[1024] PAGE_ALIGNED; + +static void set_idt(void *newidt, __u16 limit) +{ + struct Xgt_desc_struct curidt; + + /* ia32 supports unaliged loads & stores */ + curidt.size = limit; + curidt.address = (unsigned long)newidt; + + load_idt(&curidt); +}; + + +static void set_gdt(void *newgdt, __u16 limit) +{ + struct Xgt_desc_struct curgdt; + + /* ia32 supports unaligned loads & stores */ + curgdt.size = limit; + curgdt.address = (unsigned long)newgdt; + + load_gdt(&curgdt); +}; + +static void load_segments(void) +{ +#define __STR(X) #X +#define STR(X) __STR(X) + + __asm__ __volatile__ ( + "\tljmp $"STR(__KERNEL_CS)",$1f\n" + "\t1:\n" + "\tmovl $"STR(__KERNEL_DS)",%%eax\n" + "\tmovl %%eax,%%ds\n" + "\tmovl %%eax,%%es\n" + "\tmovl %%eax,%%fs\n" + "\tmovl %%eax,%%gs\n" + "\tmovl %%eax,%%ss\n" + ::: "eax", "memory"); +#undef STR +#undef __STR +} + +/* + * A architecture hook called to validate the + * proposed image and prepare the control pages + * as needed. The pages for KEXEC_CONTROL_CODE_SIZE + * have been allocated, but the segments have yet + * been copied into the kernel. + * + * Do what every setup is needed on image and the + * reboot code buffer to allow us to avoid allocations + * later. + * + * Currently nothing. + */ +int machine_kexec_prepare(struct kimage *image) +{ + return 0; +} + +/* + * Undo anything leftover by machine_kexec_prepare + * when an image is freed. + */ +void machine_kexec_cleanup(struct kimage *image) +{ +} + +/* + * Do not allocate memory (or fail in any way) in machine_kexec(). + * We are past the point of no return, committed to rebooting now. + */ +NORET_TYPE void machine_kexec(struct kimage *image) +{ + unsigned long page_list[PAGES_NR]; + void *control_page; + + /* Interrupts aren't acceptable while we reboot */ + local_irq_disable(); + + control_page = page_address(image->control_code_page); + memcpy(control_page, relocate_kernel, PAGE_SIZE); + + page_list[PA_CONTROL_PAGE] = __pa(control_page); + page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel; + page_list[PA_PGD] = __pa(kexec_pgd); + page_list[VA_PGD] = (unsigned long)kexec_pgd; +#ifdef CONFIG_X86_PAE + page_list[PA_PMD_0] = __pa(kexec_pmd0); + page_list[VA_PMD_0] = (unsigned long)kexec_pmd0; + page_list[PA_PMD_1] = __pa(kexec_pmd1); + page_list[VA_PMD_1] = (unsigned long)kexec_pmd1; +#endif + page_list[PA_PTE_0] = __pa(kexec_pte0); + page_list[VA_PTE_0] = (unsigned long)kexec_pte0; + page_list[PA_PTE_1] = __pa(kexec_pte1); + page_list[VA_PTE_1] = (unsigned long)kexec_pte1; + + /* The segment registers are funny things, they have both a + * visible and an invisible part. Whenever the visible part is + * set to a specific selector, the invisible part is loaded + * with from a table in memory. At no other time is the + * descriptor table in memory accessed. + * + * I take advantage of this here by force loading the + * segments, before I zap the gdt with an invalid value. + */ + load_segments(); + /* The gdt & idt are now invalid. + * If you want to load them you must set up your own idt & gdt. + */ + set_gdt(phys_to_virt(0),0); + set_idt(phys_to_virt(0),0); + + /* now call it */ + relocate_kernel((unsigned long)image->head, (unsigned long)page_list, + image->start, cpu_has_pae); +} + +/* crashkernel=size@addr specifies the location to reserve for + * a crash kernel. By reserving this memory we guarantee + * that linux never sets it up as a DMA target. + * Useful for holding code to do something appropriate + * after a kernel panic. + */ +static int __init parse_crashkernel(char *arg) +{ + unsigned long size, base; + size = memparse(arg, &arg); + if (*arg == '@') { + base = memparse(arg+1, &arg); + /* FIXME: Do I want a sanity check + * to validate the memory range? + */ + crashk_res.start = base; + crashk_res.end = base + size - 1; + } + return 0; +} +early_param("crashkernel", parse_crashkernel); diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c new file mode 100644 index 000000000000..c3a554703672 --- /dev/null +++ b/arch/x86/kernel/machine_kexec_64.c @@ -0,0 +1,259 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + * Copyright (C) 2002-2005 Eric Biederman <ebiederm@xmission.com> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/mm.h> +#include <linux/kexec.h> +#include <linux/string.h> +#include <linux/reboot.h> +#include <asm/pgtable.h> +#include <asm/tlbflush.h> +#include <asm/mmu_context.h> +#include <asm/io.h> + +#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) +static u64 kexec_pgd[512] PAGE_ALIGNED; +static u64 kexec_pud0[512] PAGE_ALIGNED; +static u64 kexec_pmd0[512] PAGE_ALIGNED; +static u64 kexec_pte0[512] PAGE_ALIGNED; +static u64 kexec_pud1[512] PAGE_ALIGNED; +static u64 kexec_pmd1[512] PAGE_ALIGNED; +static u64 kexec_pte1[512] PAGE_ALIGNED; + +static void init_level2_page(pmd_t *level2p, unsigned long addr) +{ + unsigned long end_addr; + + addr &= PAGE_MASK; + end_addr = addr + PUD_SIZE; + while (addr < end_addr) { + set_pmd(level2p++, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC)); + addr += PMD_SIZE; + } +} + +static int init_level3_page(struct kimage *image, pud_t *level3p, + unsigned long addr, unsigned long last_addr) +{ + unsigned long end_addr; + int result; + + result = 0; + addr &= PAGE_MASK; + end_addr = addr + PGDIR_SIZE; + while ((addr < last_addr) && (addr < end_addr)) { + struct page *page; + pmd_t *level2p; + + page = kimage_alloc_control_pages(image, 0); + if (!page) { + result = -ENOMEM; + goto out; + } + level2p = (pmd_t *)page_address(page); + init_level2_page(level2p, addr); + set_pud(level3p++, __pud(__pa(level2p) | _KERNPG_TABLE)); + addr += PUD_SIZE; + } + /* clear the unused entries */ + while (addr < end_addr) { + pud_clear(level3p++); + addr += PUD_SIZE; + } +out: + return result; +} + + +static int init_level4_page(struct kimage *image, pgd_t *level4p, + unsigned long addr, unsigned long last_addr) +{ + unsigned long end_addr; + int result; + + result = 0; + addr &= PAGE_MASK; + end_addr = addr + (PTRS_PER_PGD * PGDIR_SIZE); + while ((addr < last_addr) && (addr < end_addr)) { + struct page *page; + pud_t *level3p; + + page = kimage_alloc_control_pages(image, 0); + if (!page) { + result = -ENOMEM; + goto out; + } + level3p = (pud_t *)page_address(page); + result = init_level3_page(image, level3p, addr, last_addr); + if (result) { + goto out; + } + set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE)); + addr += PGDIR_SIZE; + } + /* clear the unused entries */ + while (addr < end_addr) { + pgd_clear(level4p++); + addr += PGDIR_SIZE; + } +out: + return result; +} + + +static int init_pgtable(struct kimage *image, unsigned long start_pgtable) +{ + pgd_t *level4p; + level4p = (pgd_t *)__va(start_pgtable); + return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT); +} + +static void set_idt(void *newidt, u16 limit) +{ + struct desc_ptr curidt; + + /* x86-64 supports unaliged loads & stores */ + curidt.size = limit; + curidt.address = (unsigned long)newidt; + + __asm__ __volatile__ ( + "lidtq %0\n" + : : "m" (curidt) + ); +}; + + +static void set_gdt(void *newgdt, u16 limit) +{ + struct desc_ptr curgdt; + + /* x86-64 supports unaligned loads & stores */ + curgdt.size = limit; + curgdt.address = (unsigned long)newgdt; + + __asm__ __volatile__ ( + "lgdtq %0\n" + : : "m" (curgdt) + ); +}; + +static void load_segments(void) +{ + __asm__ __volatile__ ( + "\tmovl %0,%%ds\n" + "\tmovl %0,%%es\n" + "\tmovl %0,%%ss\n" + "\tmovl %0,%%fs\n" + "\tmovl %0,%%gs\n" + : : "a" (__KERNEL_DS) : "memory" + ); +} + +int machine_kexec_prepare(struct kimage *image) +{ + unsigned long start_pgtable; + int result; + + /* Calculate the offsets */ + start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT; + + /* Setup the identity mapped 64bit page table */ + result = init_pgtable(image, start_pgtable); + if (result) + return result; + + return 0; +} + +void machine_kexec_cleanup(struct kimage *image) +{ + return; +} + +/* + * Do not allocate memory (or fail in any way) in machine_kexec(). + * We are past the point of no return, committed to rebooting now. + */ +NORET_TYPE void machine_kexec(struct kimage *image) +{ + unsigned long page_list[PAGES_NR]; + void *control_page; + + /* Interrupts aren't acceptable while we reboot */ + local_irq_disable(); + + control_page = page_address(image->control_code_page) + PAGE_SIZE; + memcpy(control_page, relocate_kernel, PAGE_SIZE); + + page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page); + page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel; + page_list[PA_PGD] = virt_to_phys(&kexec_pgd); + page_list[VA_PGD] = (unsigned long)kexec_pgd; + page_list[PA_PUD_0] = virt_to_phys(&kexec_pud0); + page_list[VA_PUD_0] = (unsigned long)kexec_pud0; + page_list[PA_PMD_0] = virt_to_phys(&kexec_pmd0); + page_list[VA_PMD_0] = (unsigned long)kexec_pmd0; + page_list[PA_PTE_0] = virt_to_phys(&kexec_pte0); + page_list[VA_PTE_0] = (unsigned long)kexec_pte0; + page_list[PA_PUD_1] = virt_to_phys(&kexec_pud1); + page_list[VA_PUD_1] = (unsigned long)kexec_pud1; + page_list[PA_PMD_1] = virt_to_phys(&kexec_pmd1); + page_list[VA_PMD_1] = (unsigned long)kexec_pmd1; + page_list[PA_PTE_1] = virt_to_phys(&kexec_pte1); + page_list[VA_PTE_1] = (unsigned long)kexec_pte1; + + page_list[PA_TABLE_PAGE] = + (unsigned long)__pa(page_address(image->control_code_page)); + + /* The segment registers are funny things, they have both a + * visible and an invisible part. Whenever the visible part is + * set to a specific selector, the invisible part is loaded + * with from a table in memory. At no other time is the + * descriptor table in memory accessed. + * + * I take advantage of this here by force loading the + * segments, before I zap the gdt with an invalid value. + */ + load_segments(); + /* The gdt & idt are now invalid. + * If you want to load them you must set up your own idt & gdt. + */ + set_gdt(phys_to_virt(0),0); + set_idt(phys_to_virt(0),0); + + /* now call it */ + relocate_kernel((unsigned long)image->head, (unsigned long)page_list, + image->start); +} + +/* crashkernel=size@addr specifies the location to reserve for + * a crash kernel. By reserving this memory we guarantee + * that linux never set's it up as a DMA target. + * Useful for holding code to do something appropriate + * after a kernel panic. + */ +static int __init setup_crashkernel(char *arg) +{ + unsigned long size, base; + char *p; + if (!arg) + return -EINVAL; + size = memparse(arg, &p); + if (arg == p) + return -EINVAL; + if (*p == '@') { + base = memparse(p+1, &p); + /* FIXME: Do I want a sanity check to validate the + * memory range? Yes you do, but it's too early for + * e820 -AK */ + crashk_res.start = base; + crashk_res.end = base + size - 1; + } + return 0; +} +early_param("crashkernel", setup_crashkernel); + diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c new file mode 100644 index 000000000000..b83672b89527 --- /dev/null +++ b/arch/x86/kernel/mca_32.c @@ -0,0 +1,470 @@ +/* + * linux/arch/i386/kernel/mca.c + * Written by Martin Kolinek, February 1996 + * + * Changes: + * + * Chris Beauregard July 28th, 1996 + * - Fixed up integrated SCSI detection + * + * Chris Beauregard August 3rd, 1996 + * - Made mca_info local + * - Made integrated registers accessible through standard function calls + * - Added name field + * - More sanity checking + * + * Chris Beauregard August 9th, 1996 + * - Rewrote /proc/mca + * + * Chris Beauregard January 7th, 1997 + * - Added basic NMI-processing + * - Added more information to mca_info structure + * + * David Weinehall October 12th, 1998 + * - Made a lot of cleaning up in the source + * - Added use of save_flags / restore_flags + * - Added the 'driver_loaded' flag in MCA_adapter + * - Added an alternative implemention of ZP Gu's mca_find_unused_adapter + * + * David Weinehall March 24th, 1999 + * - Fixed the output of 'Driver Installed' in /proc/mca/pos + * - Made the Integrated Video & SCSI show up even if they have id 0000 + * + * Alexander Viro November 9th, 1999 + * - Switched to regular procfs methods + * + * Alfred Arnold & David Weinehall August 23rd, 2000 + * - Added support for Planar POS-registers + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/mca.h> +#include <linux/kprobes.h> +#include <asm/system.h> +#include <asm/io.h> +#include <linux/proc_fs.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/pagemap.h> +#include <linux/ioport.h> +#include <asm/uaccess.h> +#include <linux/init.h> +#include <asm/arch_hooks.h> + +static unsigned char which_scsi = 0; + +int MCA_bus = 0; +EXPORT_SYMBOL(MCA_bus); + +/* + * Motherboard register spinlock. Untested on SMP at the moment, but + * are there any MCA SMP boxes? + * + * Yes - Alan + */ +static DEFINE_SPINLOCK(mca_lock); + +/* Build the status info for the adapter */ + +static void mca_configure_adapter_status(struct mca_device *mca_dev) { + mca_dev->status = MCA_ADAPTER_NONE; + + mca_dev->pos_id = mca_dev->pos[0] + + (mca_dev->pos[1] << 8); + + if(!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) { + + /* id = 0x0000 usually indicates hardware failure, + * however, ZP Gu (zpg@castle.net> reports that his 9556 + * has 0x0000 as id and everything still works. There + * also seem to be an adapter with id = 0x0000; the + * NCR Parallel Bus Memory Card. Until this is confirmed, + * however, this code will stay. + */ + + mca_dev->status = MCA_ADAPTER_ERROR; + + return; + } else if(mca_dev->pos_id != 0xffff) { + + /* 0xffff usually indicates that there's no adapter, + * however, some integrated adapters may have 0xffff as + * their id and still be valid. Examples are on-board + * VGA of the 55sx, the integrated SCSI of the 56 & 57, + * and possibly also the 95 ULTIMEDIA. + */ + + mca_dev->status = MCA_ADAPTER_NORMAL; + } + + if((mca_dev->pos_id == 0xffff || + mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) { + int j; + + for(j = 2; j < 8; j++) { + if(mca_dev->pos[j] != 0xff) { + mca_dev->status = MCA_ADAPTER_NORMAL; + break; + } + } + } + + if(!(mca_dev->pos[2] & MCA_ENABLED)) { + + /* enabled bit is in POS 2 */ + + mca_dev->status = MCA_ADAPTER_DISABLED; + } +} /* mca_configure_adapter_status */ + +/*--------------------------------------------------------------------*/ + +static struct resource mca_standard_resources[] = { + { .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" }, + { .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" }, + { .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" }, + { .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" }, + { .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" }, + { .start = 0x96, .end = 0x97, .name = "POS (MCA)" }, + { .start = 0x100, .end = 0x107, .name = "POS (MCA)" } +}; + +#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources) + +/** + * mca_read_and_store_pos - read the POS registers into a memory buffer + * @pos: a char pointer to 8 bytes, contains the POS register value on + * successful return + * + * Returns 1 if a card actually exists (i.e. the pos isn't + * all 0xff) or 0 otherwise + */ +static int mca_read_and_store_pos(unsigned char *pos) { + int j; + int found = 0; + + for(j=0; j<8; j++) { + if((pos[j] = inb_p(MCA_POS_REG(j))) != 0xff) { + /* 0xff all across means no device. 0x00 means + * something's broken, but a device is + * probably there. However, if you get 0x00 + * from a motherboard register it won't matter + * what we find. For the record, on the + * 57SLC, the integrated SCSI adapter has + * 0xffff for the adapter ID, but nonzero for + * other registers. */ + + found = 1; + } + } + return found; +} + +static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg) +{ + unsigned char byte; + unsigned long flags; + + if(reg < 0 || reg >= 8) + return 0; + + spin_lock_irqsave(&mca_lock, flags); + if(mca_dev->pos_register) { + /* Disable adapter setup, enable motherboard setup */ + + outb_p(0, MCA_ADAPTER_SETUP_REG); + outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); + + byte = inb_p(MCA_POS_REG(reg)); + outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); + } else { + + /* Make sure motherboard setup is off */ + + outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); + + /* Read the appropriate register */ + + outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG); + byte = inb_p(MCA_POS_REG(reg)); + outb_p(0, MCA_ADAPTER_SETUP_REG); + } + spin_unlock_irqrestore(&mca_lock, flags); + + mca_dev->pos[reg] = byte; + + return byte; +} + +static void mca_pc_write_pos(struct mca_device *mca_dev, int reg, + unsigned char byte) +{ + unsigned long flags; + + if(reg < 0 || reg >= 8) + return; + + spin_lock_irqsave(&mca_lock, flags); + + /* Make sure motherboard setup is off */ + + outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); + + /* Read in the appropriate register */ + + outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG); + outb_p(byte, MCA_POS_REG(reg)); + outb_p(0, MCA_ADAPTER_SETUP_REG); + + spin_unlock_irqrestore(&mca_lock, flags); + + /* Update the global register list, while we have the byte */ + + mca_dev->pos[reg] = byte; + +} + +/* for the primary MCA bus, we have identity transforms */ +static int mca_dummy_transform_irq(struct mca_device * mca_dev, int irq) +{ + return irq; +} + +static int mca_dummy_transform_ioport(struct mca_device * mca_dev, int port) +{ + return port; +} + +static void *mca_dummy_transform_memory(struct mca_device * mca_dev, void *mem) +{ + return mem; +} + + +static int __init mca_init(void) +{ + unsigned int i, j; + struct mca_device *mca_dev; + unsigned char pos[8]; + short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00}; + struct mca_bus *bus; + + /* WARNING: Be careful when making changes here. Putting an adapter + * and the motherboard simultaneously into setup mode may result in + * damage to chips (according to The Indispensible PC Hardware Book + * by Hans-Peter Messmer). Also, we disable system interrupts (so + * that we are not disturbed in the middle of this). + */ + + /* Make sure the MCA bus is present */ + + if (mca_system_init()) { + printk(KERN_ERR "MCA bus system initialisation failed\n"); + return -ENODEV; + } + + if (!MCA_bus) + return -ENODEV; + + printk(KERN_INFO "Micro Channel bus detected.\n"); + + /* All MCA systems have at least a primary bus */ + bus = mca_attach_bus(MCA_PRIMARY_BUS); + if (!bus) + goto out_nomem; + bus->default_dma_mask = 0xffffffffLL; + bus->f.mca_write_pos = mca_pc_write_pos; + bus->f.mca_read_pos = mca_pc_read_pos; + bus->f.mca_transform_irq = mca_dummy_transform_irq; + bus->f.mca_transform_ioport = mca_dummy_transform_ioport; + bus->f.mca_transform_memory = mca_dummy_transform_memory; + + /* get the motherboard device */ + mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL); + if(unlikely(!mca_dev)) + goto out_nomem; + + /* + * We do not expect many MCA interrupts during initialization, + * but let us be safe: + */ + spin_lock_irq(&mca_lock); + + /* Make sure adapter setup is off */ + + outb_p(0, MCA_ADAPTER_SETUP_REG); + + /* Read motherboard POS registers */ + + mca_dev->pos_register = 0x7f; + outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); + mca_dev->name[0] = 0; + mca_read_and_store_pos(mca_dev->pos); + mca_configure_adapter_status(mca_dev); + /* fake POS and slot for a motherboard */ + mca_dev->pos_id = MCA_MOTHERBOARD_POS; + mca_dev->slot = MCA_MOTHERBOARD; + mca_register_device(MCA_PRIMARY_BUS, mca_dev); + + mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); + if(unlikely(!mca_dev)) + goto out_unlock_nomem; + + /* Put motherboard into video setup mode, read integrated video + * POS registers, and turn motherboard setup off. + */ + + mca_dev->pos_register = 0xdf; + outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); + mca_dev->name[0] = 0; + mca_read_and_store_pos(mca_dev->pos); + mca_configure_adapter_status(mca_dev); + /* fake POS and slot for the integrated video */ + mca_dev->pos_id = MCA_INTEGVIDEO_POS; + mca_dev->slot = MCA_INTEGVIDEO; + mca_register_device(MCA_PRIMARY_BUS, mca_dev); + + /* Put motherboard into scsi setup mode, read integrated scsi + * POS registers, and turn motherboard setup off. + * + * It seems there are two possible SCSI registers. Martin says that + * for the 56,57, 0xf7 is the one, but fails on the 76. + * Alfredo (apena@vnet.ibm.com) says + * 0xfd works on his machine. We'll try both of them. I figure it's + * a good bet that only one could be valid at a time. This could + * screw up though if one is used for something else on the other + * machine. + */ + + for(i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) { + outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG); + if(mca_read_and_store_pos(pos)) + break; + } + if(which_scsi) { + /* found a scsi card */ + mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); + if(unlikely(!mca_dev)) + goto out_unlock_nomem; + + for(j = 0; j < 8; j++) + mca_dev->pos[j] = pos[j]; + + mca_configure_adapter_status(mca_dev); + /* fake POS and slot for integrated SCSI controller */ + mca_dev->pos_id = MCA_INTEGSCSI_POS; + mca_dev->slot = MCA_INTEGSCSI; + mca_dev->pos_register = which_scsi; + mca_register_device(MCA_PRIMARY_BUS, mca_dev); + } + + /* Turn off motherboard setup */ + + outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); + + /* Now loop over MCA slots: put each adapter into setup mode, and + * read its POS registers. Then put adapter setup off. + */ + + for(i=0; i<MCA_MAX_SLOT_NR; i++) { + outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG); + if(!mca_read_and_store_pos(pos)) + continue; + + mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); + if(unlikely(!mca_dev)) + goto out_unlock_nomem; + + for(j=0; j<8; j++) + mca_dev->pos[j]=pos[j]; + + mca_dev->driver_loaded = 0; + mca_dev->slot = i; + mca_dev->pos_register = 0; + mca_configure_adapter_status(mca_dev); + mca_register_device(MCA_PRIMARY_BUS, mca_dev); + } + outb_p(0, MCA_ADAPTER_SETUP_REG); + + /* Enable interrupts and return memory start */ + spin_unlock_irq(&mca_lock); + + for (i = 0; i < MCA_STANDARD_RESOURCES; i++) + request_resource(&ioport_resource, mca_standard_resources + i); + + mca_do_proc_init(); + + return 0; + + out_unlock_nomem: + spin_unlock_irq(&mca_lock); + out_nomem: + printk(KERN_EMERG "Failed memory allocation in MCA setup!\n"); + return -ENOMEM; +} + +subsys_initcall(mca_init); + +/*--------------------------------------------------------------------*/ + +static __kprobes void +mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag) +{ + int slot = mca_dev->slot; + + if(slot == MCA_INTEGSCSI) { + printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n", + mca_dev->name); + } else if(slot == MCA_INTEGVIDEO) { + printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n", + mca_dev->name); + } else if(slot == MCA_MOTHERBOARD) { + printk(KERN_CRIT "NMI: caused by motherboard (%s)\n", + mca_dev->name); + } + + /* More info available in POS 6 and 7? */ + + if(check_flag) { + unsigned char pos6, pos7; + + pos6 = mca_device_read_pos(mca_dev, 6); + pos7 = mca_device_read_pos(mca_dev, 7); + + printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7); + } + +} /* mca_handle_nmi_slot */ + +/*--------------------------------------------------------------------*/ + +static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data) +{ + struct mca_device *mca_dev = to_mca_device(dev); + unsigned char pos5; + + pos5 = mca_device_read_pos(mca_dev, 5); + + if(!(pos5 & 0x80)) { + /* Bit 7 of POS 5 is reset when this adapter has a hardware + * error. Bit 7 it reset if there's error information + * available in POS 6 and 7. + */ + mca_handle_nmi_device(mca_dev, !(pos5 & 0x40)); + return 1; + } + return 0; +} + +void __kprobes mca_handle_nmi(void) +{ + /* First try - scan the various adapters and see if a specific + * adapter was responsible for the error. + */ + bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback); + + mca_nmi_hook(); +} /* mca_handle_nmi */ diff --git a/arch/x86/kernel/mce_64.c b/arch/x86/kernel/mce_64.c new file mode 100644 index 000000000000..a66d607f5b92 --- /dev/null +++ b/arch/x86/kernel/mce_64.c @@ -0,0 +1,875 @@ +/* + * Machine check handler. + * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs. + * Rest from unknown author(s). + * 2004 Andi Kleen. Rewrote most of it. + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/rcupdate.h> +#include <linux/kallsyms.h> +#include <linux/sysdev.h> +#include <linux/miscdevice.h> +#include <linux/fs.h> +#include <linux/capability.h> +#include <linux/cpu.h> +#include <linux/percpu.h> +#include <linux/poll.h> +#include <linux/thread_info.h> +#include <linux/ctype.h> +#include <linux/kmod.h> +#include <linux/kdebug.h> +#include <asm/processor.h> +#include <asm/msr.h> +#include <asm/mce.h> +#include <asm/uaccess.h> +#include <asm/smp.h> +#include <asm/idle.h> + +#define MISC_MCELOG_MINOR 227 +#define NR_BANKS 6 + +atomic_t mce_entry; + +static int mce_dont_init; + +/* + * Tolerant levels: + * 0: always panic on uncorrected errors, log corrected errors + * 1: panic or SIGBUS on uncorrected errors, log corrected errors + * 2: SIGBUS or log uncorrected errors (if possible), log corrected errors + * 3: never panic or SIGBUS, log all errors (for testing only) + */ +static int tolerant = 1; +static int banks; +static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; +static unsigned long notify_user; +static int rip_msr; +static int mce_bootlog = 1; +static atomic_t mce_events; + +static char trigger[128]; +static char *trigger_argv[2] = { trigger, NULL }; + +static DECLARE_WAIT_QUEUE_HEAD(mce_wait); + +/* + * Lockless MCE logging infrastructure. + * This avoids deadlocks on printk locks without having to break locks. Also + * separate MCEs from kernel messages to avoid bogus bug reports. + */ + +struct mce_log mcelog = { + MCE_LOG_SIGNATURE, + MCE_LOG_LEN, +}; + +void mce_log(struct mce *mce) +{ + unsigned next, entry; + atomic_inc(&mce_events); + mce->finished = 0; + wmb(); + for (;;) { + entry = rcu_dereference(mcelog.next); + /* The rmb forces the compiler to reload next in each + iteration */ + rmb(); + for (;;) { + /* When the buffer fills up discard new entries. Assume + that the earlier errors are the more interesting. */ + if (entry >= MCE_LOG_LEN) { + set_bit(MCE_OVERFLOW, &mcelog.flags); + return; + } + /* Old left over entry. Skip. */ + if (mcelog.entry[entry].finished) { + entry++; + continue; + } + break; + } + smp_rmb(); + next = entry + 1; + if (cmpxchg(&mcelog.next, entry, next) == entry) + break; + } + memcpy(mcelog.entry + entry, mce, sizeof(struct mce)); + wmb(); + mcelog.entry[entry].finished = 1; + wmb(); + + set_bit(0, ¬ify_user); +} + +static void print_mce(struct mce *m) +{ + printk(KERN_EMERG "\n" + KERN_EMERG "HARDWARE ERROR\n" + KERN_EMERG + "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n", + m->cpu, m->mcgstatus, m->bank, m->status); + if (m->rip) { + printk(KERN_EMERG + "RIP%s %02x:<%016Lx> ", + !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "", + m->cs, m->rip); + if (m->cs == __KERNEL_CS) + print_symbol("{%s}", m->rip); + printk("\n"); + } + printk(KERN_EMERG "TSC %Lx ", m->tsc); + if (m->addr) + printk("ADDR %Lx ", m->addr); + if (m->misc) + printk("MISC %Lx ", m->misc); + printk("\n"); + printk(KERN_EMERG "This is not a software problem!\n"); + printk(KERN_EMERG + "Run through mcelog --ascii to decode and contact your hardware vendor\n"); +} + +static void mce_panic(char *msg, struct mce *backup, unsigned long start) +{ + int i; + + oops_begin(); + for (i = 0; i < MCE_LOG_LEN; i++) { + unsigned long tsc = mcelog.entry[i].tsc; + if (time_before(tsc, start)) + continue; + print_mce(&mcelog.entry[i]); + if (backup && mcelog.entry[i].tsc == backup->tsc) + backup = NULL; + } + if (backup) + print_mce(backup); + panic(msg); +} + +static int mce_available(struct cpuinfo_x86 *c) +{ + return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA); +} + +static inline void mce_get_rip(struct mce *m, struct pt_regs *regs) +{ + if (regs && (m->mcgstatus & MCG_STATUS_RIPV)) { + m->rip = regs->rip; + m->cs = regs->cs; + } else { + m->rip = 0; + m->cs = 0; + } + if (rip_msr) { + /* Assume the RIP in the MSR is exact. Is this true? */ + m->mcgstatus |= MCG_STATUS_EIPV; + rdmsrl(rip_msr, m->rip); + m->cs = 0; + } +} + +/* + * The actual machine check handler + */ + +void do_machine_check(struct pt_regs * regs, long error_code) +{ + struct mce m, panicm; + u64 mcestart = 0; + int i; + int panicm_found = 0; + /* + * If no_way_out gets set, there is no safe way to recover from this + * MCE. If tolerant is cranked up, we'll try anyway. + */ + int no_way_out = 0; + /* + * If kill_it gets set, there might be a way to recover from this + * error. + */ + int kill_it = 0; + + atomic_inc(&mce_entry); + + if (regs) + notify_die(DIE_NMI, "machine check", regs, error_code, 18, SIGKILL); + if (!banks) + goto out2; + + memset(&m, 0, sizeof(struct mce)); + m.cpu = smp_processor_id(); + rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus); + /* if the restart IP is not valid, we're done for */ + if (!(m.mcgstatus & MCG_STATUS_RIPV)) + no_way_out = 1; + + rdtscll(mcestart); + barrier(); + + for (i = 0; i < banks; i++) { + if (!bank[i]) + continue; + + m.misc = 0; + m.addr = 0; + m.bank = i; + m.tsc = 0; + + rdmsrl(MSR_IA32_MC0_STATUS + i*4, m.status); + if ((m.status & MCI_STATUS_VAL) == 0) + continue; + + if (m.status & MCI_STATUS_EN) { + /* if PCC was set, there's no way out */ + no_way_out |= !!(m.status & MCI_STATUS_PCC); + /* + * If this error was uncorrectable and there was + * an overflow, we're in trouble. If no overflow, + * we might get away with just killing a task. + */ + if (m.status & MCI_STATUS_UC) { + if (tolerant < 1 || m.status & MCI_STATUS_OVER) + no_way_out = 1; + kill_it = 1; + } + } + + if (m.status & MCI_STATUS_MISCV) + rdmsrl(MSR_IA32_MC0_MISC + i*4, m.misc); + if (m.status & MCI_STATUS_ADDRV) + rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr); + + mce_get_rip(&m, regs); + if (error_code >= 0) + rdtscll(m.tsc); + if (error_code != -2) + mce_log(&m); + + /* Did this bank cause the exception? */ + /* Assume that the bank with uncorrectable errors did it, + and that there is only a single one. */ + if ((m.status & MCI_STATUS_UC) && (m.status & MCI_STATUS_EN)) { + panicm = m; + panicm_found = 1; + } + + add_taint(TAINT_MACHINE_CHECK); + } + + /* Never do anything final in the polling timer */ + if (!regs) + goto out; + + /* If we didn't find an uncorrectable error, pick + the last one (shouldn't happen, just being safe). */ + if (!panicm_found) + panicm = m; + + /* + * If we have decided that we just CAN'T continue, and the user + * has not set tolerant to an insane level, give up and die. + */ + if (no_way_out && tolerant < 3) + mce_panic("Machine check", &panicm, mcestart); + + /* + * If the error seems to be unrecoverable, something should be + * done. Try to kill as little as possible. If we can kill just + * one task, do that. If the user has set the tolerance very + * high, don't try to do anything at all. + */ + if (kill_it && tolerant < 3) { + int user_space = 0; + + /* + * If the EIPV bit is set, it means the saved IP is the + * instruction which caused the MCE. + */ + if (m.mcgstatus & MCG_STATUS_EIPV) + user_space = panicm.rip && (panicm.cs & 3); + + /* + * If we know that the error was in user space, send a + * SIGBUS. Otherwise, panic if tolerance is low. + * + * do_exit() takes an awful lot of locks and has a slight + * risk of deadlocking. + */ + if (user_space) { + do_exit(SIGBUS); + } else if (panic_on_oops || tolerant < 2) { + mce_panic("Uncorrected machine check", + &panicm, mcestart); + } + } + + /* notify userspace ASAP */ + set_thread_flag(TIF_MCE_NOTIFY); + + out: + /* the last thing we do is clear state */ + for (i = 0; i < banks; i++) + wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); + wrmsrl(MSR_IA32_MCG_STATUS, 0); + out2: + atomic_dec(&mce_entry); +} + +#ifdef CONFIG_X86_MCE_INTEL +/*** + * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog + * @cpu: The CPU on which the event occured. + * @status: Event status information + * + * This function should be called by the thermal interrupt after the + * event has been processed and the decision was made to log the event + * further. + * + * The status parameter will be saved to the 'status' field of 'struct mce' + * and historically has been the register value of the + * MSR_IA32_THERMAL_STATUS (Intel) msr. + */ +void mce_log_therm_throt_event(unsigned int cpu, __u64 status) +{ + struct mce m; + + memset(&m, 0, sizeof(m)); + m.cpu = cpu; + m.bank = MCE_THERMAL_BANK; + m.status = status; + rdtscll(m.tsc); + mce_log(&m); +} +#endif /* CONFIG_X86_MCE_INTEL */ + +/* + * Periodic polling timer for "silent" machine check errors. If the + * poller finds an MCE, poll 2x faster. When the poller finds no more + * errors, poll 2x slower (up to check_interval seconds). + */ + +static int check_interval = 5 * 60; /* 5 minutes */ +static int next_interval; /* in jiffies */ +static void mcheck_timer(struct work_struct *work); +static DECLARE_DELAYED_WORK(mcheck_work, mcheck_timer); + +static void mcheck_check_cpu(void *info) +{ + if (mce_available(¤t_cpu_data)) + do_machine_check(NULL, 0); +} + +static void mcheck_timer(struct work_struct *work) +{ + on_each_cpu(mcheck_check_cpu, NULL, 1, 1); + + /* + * Alert userspace if needed. If we logged an MCE, reduce the + * polling interval, otherwise increase the polling interval. + */ + if (mce_notify_user()) { + next_interval = max(next_interval/2, HZ/100); + } else { + next_interval = min(next_interval*2, + (int)round_jiffies_relative(check_interval*HZ)); + } + + schedule_delayed_work(&mcheck_work, next_interval); +} + +/* + * This is only called from process context. This is where we do + * anything we need to alert userspace about new MCEs. This is called + * directly from the poller and also from entry.S and idle, thanks to + * TIF_MCE_NOTIFY. + */ +int mce_notify_user(void) +{ + clear_thread_flag(TIF_MCE_NOTIFY); + if (test_and_clear_bit(0, ¬ify_user)) { + static unsigned long last_print; + unsigned long now = jiffies; + + wake_up_interruptible(&mce_wait); + if (trigger[0]) + call_usermodehelper(trigger, trigger_argv, NULL, + UMH_NO_WAIT); + + if (time_after_eq(now, last_print + (check_interval*HZ))) { + last_print = now; + printk(KERN_INFO "Machine check events logged\n"); + } + + return 1; + } + return 0; +} + +/* see if the idle task needs to notify userspace */ +static int +mce_idle_callback(struct notifier_block *nfb, unsigned long action, void *junk) +{ + /* IDLE_END should be safe - interrupts are back on */ + if (action == IDLE_END && test_thread_flag(TIF_MCE_NOTIFY)) + mce_notify_user(); + + return NOTIFY_OK; +} + +static struct notifier_block mce_idle_notifier = { + .notifier_call = mce_idle_callback, +}; + +static __init int periodic_mcheck_init(void) +{ + next_interval = check_interval * HZ; + if (next_interval) + schedule_delayed_work(&mcheck_work, + round_jiffies_relative(next_interval)); + idle_notifier_register(&mce_idle_notifier); + return 0; +} +__initcall(periodic_mcheck_init); + + +/* + * Initialize Machine Checks for a CPU. + */ +static void mce_init(void *dummy) +{ + u64 cap; + int i; + + rdmsrl(MSR_IA32_MCG_CAP, cap); + banks = cap & 0xff; + if (banks > NR_BANKS) { + printk(KERN_INFO "MCE: warning: using only %d banks\n", banks); + banks = NR_BANKS; + } + /* Use accurate RIP reporting if available. */ + if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9) + rip_msr = MSR_IA32_MCG_EIP; + + /* Log the machine checks left over from the previous reset. + This also clears all registers */ + do_machine_check(NULL, mce_bootlog ? -1 : -2); + + set_in_cr4(X86_CR4_MCE); + + if (cap & MCG_CTL_P) + wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); + + for (i = 0; i < banks; i++) { + wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); + } +} + +/* Add per CPU specific workarounds here */ +static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c) +{ + /* This should be disabled by the BIOS, but isn't always */ + if (c->x86_vendor == X86_VENDOR_AMD && c->x86 == 15) { + /* disable GART TBL walk error reporting, which trips off + incorrectly with the IOMMU & 3ware & Cerberus. */ + clear_bit(10, &bank[4]); + /* Lots of broken BIOS around that don't clear them + by default and leave crap in there. Don't log. */ + mce_bootlog = 0; + } + +} + +static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c) +{ + switch (c->x86_vendor) { + case X86_VENDOR_INTEL: + mce_intel_feature_init(c); + break; + case X86_VENDOR_AMD: + mce_amd_feature_init(c); + break; + default: + break; + } +} + +/* + * Called for each booted CPU to set up machine checks. + * Must be called with preempt off. + */ +void __cpuinit mcheck_init(struct cpuinfo_x86 *c) +{ + static cpumask_t mce_cpus = CPU_MASK_NONE; + + mce_cpu_quirks(c); + + if (mce_dont_init || + cpu_test_and_set(smp_processor_id(), mce_cpus) || + !mce_available(c)) + return; + + mce_init(NULL); + mce_cpu_features(c); +} + +/* + * Character device to read and clear the MCE log. + */ + +static DEFINE_SPINLOCK(mce_state_lock); +static int open_count; /* #times opened */ +static int open_exclu; /* already open exclusive? */ + +static int mce_open(struct inode *inode, struct file *file) +{ + spin_lock(&mce_state_lock); + + if (open_exclu || (open_count && (file->f_flags & O_EXCL))) { + spin_unlock(&mce_state_lock); + return -EBUSY; + } + + if (file->f_flags & O_EXCL) + open_exclu = 1; + open_count++; + + spin_unlock(&mce_state_lock); + + return nonseekable_open(inode, file); +} + +static int mce_release(struct inode *inode, struct file *file) +{ + spin_lock(&mce_state_lock); + + open_count--; + open_exclu = 0; + + spin_unlock(&mce_state_lock); + + return 0; +} + +static void collect_tscs(void *data) +{ + unsigned long *cpu_tsc = (unsigned long *)data; + rdtscll(cpu_tsc[smp_processor_id()]); +} + +static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, loff_t *off) +{ + unsigned long *cpu_tsc; + static DECLARE_MUTEX(mce_read_sem); + unsigned next; + char __user *buf = ubuf; + int i, err; + + cpu_tsc = kmalloc(NR_CPUS * sizeof(long), GFP_KERNEL); + if (!cpu_tsc) + return -ENOMEM; + + down(&mce_read_sem); + next = rcu_dereference(mcelog.next); + + /* Only supports full reads right now */ + if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) { + up(&mce_read_sem); + kfree(cpu_tsc); + return -EINVAL; + } + + err = 0; + for (i = 0; i < next; i++) { + unsigned long start = jiffies; + while (!mcelog.entry[i].finished) { + if (time_after_eq(jiffies, start + 2)) { + memset(mcelog.entry + i,0, sizeof(struct mce)); + goto timeout; + } + cpu_relax(); + } + smp_rmb(); + err |= copy_to_user(buf, mcelog.entry + i, sizeof(struct mce)); + buf += sizeof(struct mce); + timeout: + ; + } + + memset(mcelog.entry, 0, next * sizeof(struct mce)); + mcelog.next = 0; + + synchronize_sched(); + + /* Collect entries that were still getting written before the synchronize. */ + + on_each_cpu(collect_tscs, cpu_tsc, 1, 1); + for (i = next; i < MCE_LOG_LEN; i++) { + if (mcelog.entry[i].finished && + mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) { + err |= copy_to_user(buf, mcelog.entry+i, sizeof(struct mce)); + smp_rmb(); + buf += sizeof(struct mce); + memset(&mcelog.entry[i], 0, sizeof(struct mce)); + } + } + up(&mce_read_sem); + kfree(cpu_tsc); + return err ? -EFAULT : buf - ubuf; +} + +static unsigned int mce_poll(struct file *file, poll_table *wait) +{ + poll_wait(file, &mce_wait, wait); + if (rcu_dereference(mcelog.next)) + return POLLIN | POLLRDNORM; + return 0; +} + +static int mce_ioctl(struct inode *i, struct file *f,unsigned int cmd, unsigned long arg) +{ + int __user *p = (int __user *)arg; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + switch (cmd) { + case MCE_GET_RECORD_LEN: + return put_user(sizeof(struct mce), p); + case MCE_GET_LOG_LEN: + return put_user(MCE_LOG_LEN, p); + case MCE_GETCLEAR_FLAGS: { + unsigned flags; + do { + flags = mcelog.flags; + } while (cmpxchg(&mcelog.flags, flags, 0) != flags); + return put_user(flags, p); + } + default: + return -ENOTTY; + } +} + +static const struct file_operations mce_chrdev_ops = { + .open = mce_open, + .release = mce_release, + .read = mce_read, + .poll = mce_poll, + .ioctl = mce_ioctl, +}; + +static struct miscdevice mce_log_device = { + MISC_MCELOG_MINOR, + "mcelog", + &mce_chrdev_ops, +}; + +static unsigned long old_cr4 __initdata; + +void __init stop_mce(void) +{ + old_cr4 = read_cr4(); + clear_in_cr4(X86_CR4_MCE); +} + +void __init restart_mce(void) +{ + if (old_cr4 & X86_CR4_MCE) + set_in_cr4(X86_CR4_MCE); +} + +/* + * Old style boot options parsing. Only for compatibility. + */ + +static int __init mcheck_disable(char *str) +{ + mce_dont_init = 1; + return 1; +} + +/* mce=off disables machine check. Note you can reenable it later + using sysfs. + mce=TOLERANCELEVEL (number, see above) + mce=bootlog Log MCEs from before booting. Disabled by default on AMD. + mce=nobootlog Don't log MCEs from before booting. */ +static int __init mcheck_enable(char *str) +{ + if (*str == '=') + str++; + if (!strcmp(str, "off")) + mce_dont_init = 1; + else if (!strcmp(str, "bootlog") || !strcmp(str,"nobootlog")) + mce_bootlog = str[0] == 'b'; + else if (isdigit(str[0])) + get_option(&str, &tolerant); + else + printk("mce= argument %s ignored. Please use /sys", str); + return 1; +} + +__setup("nomce", mcheck_disable); +__setup("mce", mcheck_enable); + +/* + * Sysfs support + */ + +/* On resume clear all MCE state. Don't want to see leftovers from the BIOS. + Only one CPU is active at this time, the others get readded later using + CPU hotplug. */ +static int mce_resume(struct sys_device *dev) +{ + mce_init(NULL); + return 0; +} + +/* Reinit MCEs after user configuration changes */ +static void mce_restart(void) +{ + if (next_interval) + cancel_delayed_work(&mcheck_work); + /* Timer race is harmless here */ + on_each_cpu(mce_init, NULL, 1, 1); + next_interval = check_interval * HZ; + if (next_interval) + schedule_delayed_work(&mcheck_work, + round_jiffies_relative(next_interval)); +} + +static struct sysdev_class mce_sysclass = { + .resume = mce_resume, + set_kset_name("machinecheck"), +}; + +DEFINE_PER_CPU(struct sys_device, device_mce); + +/* Why are there no generic functions for this? */ +#define ACCESSOR(name, var, start) \ + static ssize_t show_ ## name(struct sys_device *s, char *buf) { \ + return sprintf(buf, "%lx\n", (unsigned long)var); \ + } \ + static ssize_t set_ ## name(struct sys_device *s,const char *buf,size_t siz) { \ + char *end; \ + unsigned long new = simple_strtoul(buf, &end, 0); \ + if (end == buf) return -EINVAL; \ + var = new; \ + start; \ + return end-buf; \ + } \ + static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); + +/* TBD should generate these dynamically based on number of available banks */ +ACCESSOR(bank0ctl,bank[0],mce_restart()) +ACCESSOR(bank1ctl,bank[1],mce_restart()) +ACCESSOR(bank2ctl,bank[2],mce_restart()) +ACCESSOR(bank3ctl,bank[3],mce_restart()) +ACCESSOR(bank4ctl,bank[4],mce_restart()) +ACCESSOR(bank5ctl,bank[5],mce_restart()) + +static ssize_t show_trigger(struct sys_device *s, char *buf) +{ + strcpy(buf, trigger); + strcat(buf, "\n"); + return strlen(trigger) + 1; +} + +static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz) +{ + char *p; + int len; + strncpy(trigger, buf, sizeof(trigger)); + trigger[sizeof(trigger)-1] = 0; + len = strlen(trigger); + p = strchr(trigger, '\n'); + if (*p) *p = 0; + return len; +} + +static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger); +ACCESSOR(tolerant,tolerant,) +ACCESSOR(check_interval,check_interval,mce_restart()) +static struct sysdev_attribute *mce_attributes[] = { + &attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl, + &attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl, + &attr_tolerant, &attr_check_interval, &attr_trigger, + NULL +}; + +/* Per cpu sysdev init. All of the cpus still share the same ctl bank */ +static __cpuinit int mce_create_device(unsigned int cpu) +{ + int err; + int i; + if (!mce_available(&cpu_data[cpu])) + return -EIO; + + per_cpu(device_mce,cpu).id = cpu; + per_cpu(device_mce,cpu).cls = &mce_sysclass; + + err = sysdev_register(&per_cpu(device_mce,cpu)); + + if (!err) { + for (i = 0; mce_attributes[i]; i++) + sysdev_create_file(&per_cpu(device_mce,cpu), + mce_attributes[i]); + } + return err; +} + +static void mce_remove_device(unsigned int cpu) +{ + int i; + + for (i = 0; mce_attributes[i]; i++) + sysdev_remove_file(&per_cpu(device_mce,cpu), + mce_attributes[i]); + sysdev_unregister(&per_cpu(device_mce,cpu)); + memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject)); +} + +/* Get notified when a cpu comes on/off. Be hotplug friendly. */ +static int +mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + mce_create_device(cpu); + break; + case CPU_DEAD: + case CPU_DEAD_FROZEN: + mce_remove_device(cpu); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block mce_cpu_notifier = { + .notifier_call = mce_cpu_callback, +}; + +static __init int mce_init_device(void) +{ + int err; + int i = 0; + + if (!mce_available(&boot_cpu_data)) + return -EIO; + err = sysdev_class_register(&mce_sysclass); + + for_each_online_cpu(i) { + mce_create_device(i); + } + + register_hotcpu_notifier(&mce_cpu_notifier); + misc_register(&mce_log_device); + return err; +} + +device_initcall(mce_init_device); diff --git a/arch/x86/kernel/mce_amd_64.c b/arch/x86/kernel/mce_amd_64.c new file mode 100644 index 000000000000..2f8a7f18b0fe --- /dev/null +++ b/arch/x86/kernel/mce_amd_64.c @@ -0,0 +1,689 @@ +/* + * (c) 2005, 2006 Advanced Micro Devices, Inc. + * Your use of this code is subject to the terms and conditions of the + * GNU general public license version 2. See "COPYING" or + * http://www.gnu.org/licenses/gpl.html + * + * Written by Jacob Shin - AMD, Inc. + * + * Support : jacob.shin@amd.com + * + * April 2006 + * - added support for AMD Family 0x10 processors + * + * All MC4_MISCi registers are shared between multi-cores + */ + +#include <linux/cpu.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kobject.h> +#include <linux/notifier.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/sysdev.h> +#include <linux/sysfs.h> +#include <asm/apic.h> +#include <asm/mce.h> +#include <asm/msr.h> +#include <asm/percpu.h> +#include <asm/idle.h> + +#define PFX "mce_threshold: " +#define VERSION "version 1.1.1" +#define NR_BANKS 6 +#define NR_BLOCKS 9 +#define THRESHOLD_MAX 0xFFF +#define INT_TYPE_APIC 0x00020000 +#define MASK_VALID_HI 0x80000000 +#define MASK_CNTP_HI 0x40000000 +#define MASK_LOCKED_HI 0x20000000 +#define MASK_LVTOFF_HI 0x00F00000 +#define MASK_COUNT_EN_HI 0x00080000 +#define MASK_INT_TYPE_HI 0x00060000 +#define MASK_OVERFLOW_HI 0x00010000 +#define MASK_ERR_COUNT_HI 0x00000FFF +#define MASK_BLKPTR_LO 0xFF000000 +#define MCG_XBLK_ADDR 0xC0000400 + +struct threshold_block { + unsigned int block; + unsigned int bank; + unsigned int cpu; + u32 address; + u16 interrupt_enable; + u16 threshold_limit; + struct kobject kobj; + struct list_head miscj; +}; + +/* defaults used early on boot */ +static struct threshold_block threshold_defaults = { + .interrupt_enable = 0, + .threshold_limit = THRESHOLD_MAX, +}; + +struct threshold_bank { + struct kobject kobj; + struct threshold_block *blocks; + cpumask_t cpus; +}; +static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]); + +#ifdef CONFIG_SMP +static unsigned char shared_bank[NR_BANKS] = { + 0, 0, 0, 0, 1 +}; +#endif + +static DEFINE_PER_CPU(unsigned char, bank_map); /* see which banks are on */ + +/* + * CPU Initialization + */ + +/* must be called with correct cpu affinity */ +static void threshold_restart_bank(struct threshold_block *b, + int reset, u16 old_limit) +{ + u32 mci_misc_hi, mci_misc_lo; + + rdmsr(b->address, mci_misc_lo, mci_misc_hi); + + if (b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX)) + reset = 1; /* limit cannot be lower than err count */ + + if (reset) { /* reset err count and overflow bit */ + mci_misc_hi = + (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) | + (THRESHOLD_MAX - b->threshold_limit); + } else if (old_limit) { /* change limit w/o reset */ + int new_count = (mci_misc_hi & THRESHOLD_MAX) + + (old_limit - b->threshold_limit); + mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) | + (new_count & THRESHOLD_MAX); + } + + b->interrupt_enable ? + (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) : + (mci_misc_hi &= ~MASK_INT_TYPE_HI); + + mci_misc_hi |= MASK_COUNT_EN_HI; + wrmsr(b->address, mci_misc_lo, mci_misc_hi); +} + +/* cpu init entry point, called from mce.c with preempt off */ +void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c) +{ + unsigned int bank, block; + unsigned int cpu = smp_processor_id(); + u32 low = 0, high = 0, address = 0; + + for (bank = 0; bank < NR_BANKS; ++bank) { + for (block = 0; block < NR_BLOCKS; ++block) { + if (block == 0) + address = MSR_IA32_MC0_MISC + bank * 4; + else if (block == 1) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + break; + address += MCG_XBLK_ADDR; + } + else + ++address; + + if (rdmsr_safe(address, &low, &high)) + break; + + if (!(high & MASK_VALID_HI)) { + if (block) + continue; + else + break; + } + + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) + continue; + + if (!block) + per_cpu(bank_map, cpu) |= (1 << bank); +#ifdef CONFIG_SMP + if (shared_bank[bank] && c->cpu_core_id) + break; +#endif + high &= ~MASK_LVTOFF_HI; + high |= K8_APIC_EXT_LVT_ENTRY_THRESHOLD << 20; + wrmsr(address, low, high); + + setup_APIC_extended_lvt(K8_APIC_EXT_LVT_ENTRY_THRESHOLD, + THRESHOLD_APIC_VECTOR, + K8_APIC_EXT_INT_MSG_FIX, 0); + + threshold_defaults.address = address; + threshold_restart_bank(&threshold_defaults, 0, 0); + } + } +} + +/* + * APIC Interrupt Handler + */ + +/* + * threshold interrupt handler will service THRESHOLD_APIC_VECTOR. + * the interrupt goes off when error_count reaches threshold_limit. + * the handler will simply log mcelog w/ software defined bank number. + */ +asmlinkage void mce_threshold_interrupt(void) +{ + unsigned int bank, block; + struct mce m; + u32 low = 0, high = 0, address = 0; + + ack_APIC_irq(); + exit_idle(); + irq_enter(); + + memset(&m, 0, sizeof(m)); + rdtscll(m.tsc); + m.cpu = smp_processor_id(); + + /* assume first bank caused it */ + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, m.cpu) & (1 << bank))) + continue; + for (block = 0; block < NR_BLOCKS; ++block) { + if (block == 0) + address = MSR_IA32_MC0_MISC + bank * 4; + else if (block == 1) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + break; + address += MCG_XBLK_ADDR; + } + else + ++address; + + if (rdmsr_safe(address, &low, &high)) + break; + + if (!(high & MASK_VALID_HI)) { + if (block) + continue; + else + break; + } + + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) + continue; + + /* Log the machine check that caused the threshold + event. */ + do_machine_check(NULL, 0); + + if (high & MASK_OVERFLOW_HI) { + rdmsrl(address, m.misc); + rdmsrl(MSR_IA32_MC0_STATUS + bank * 4, + m.status); + m.bank = K8_MCE_THRESHOLD_BASE + + bank * NR_BLOCKS + + block; + mce_log(&m); + goto out; + } + } + } +out: + irq_exit(); +} + +/* + * Sysfs Interface + */ + +struct threshold_attr { + struct attribute attr; + ssize_t(*show) (struct threshold_block *, char *); + ssize_t(*store) (struct threshold_block *, const char *, size_t count); +}; + +static cpumask_t affinity_set(unsigned int cpu) +{ + cpumask_t oldmask = current->cpus_allowed; + cpumask_t newmask = CPU_MASK_NONE; + cpu_set(cpu, newmask); + set_cpus_allowed(current, newmask); + return oldmask; +} + +static void affinity_restore(cpumask_t oldmask) +{ + set_cpus_allowed(current, oldmask); +} + +#define SHOW_FIELDS(name) \ +static ssize_t show_ ## name(struct threshold_block * b, char *buf) \ +{ \ + return sprintf(buf, "%lx\n", (unsigned long) b->name); \ +} +SHOW_FIELDS(interrupt_enable) +SHOW_FIELDS(threshold_limit) + +static ssize_t store_interrupt_enable(struct threshold_block *b, + const char *buf, size_t count) +{ + char *end; + cpumask_t oldmask; + unsigned long new = simple_strtoul(buf, &end, 0); + if (end == buf) + return -EINVAL; + b->interrupt_enable = !!new; + + oldmask = affinity_set(b->cpu); + threshold_restart_bank(b, 0, 0); + affinity_restore(oldmask); + + return end - buf; +} + +static ssize_t store_threshold_limit(struct threshold_block *b, + const char *buf, size_t count) +{ + char *end; + cpumask_t oldmask; + u16 old; + unsigned long new = simple_strtoul(buf, &end, 0); + if (end == buf) + return -EINVAL; + if (new > THRESHOLD_MAX) + new = THRESHOLD_MAX; + if (new < 1) + new = 1; + old = b->threshold_limit; + b->threshold_limit = new; + + oldmask = affinity_set(b->cpu); + threshold_restart_bank(b, 0, old); + affinity_restore(oldmask); + + return end - buf; +} + +static ssize_t show_error_count(struct threshold_block *b, char *buf) +{ + u32 high, low; + cpumask_t oldmask; + oldmask = affinity_set(b->cpu); + rdmsr(b->address, low, high); + affinity_restore(oldmask); + return sprintf(buf, "%x\n", + (high & 0xFFF) - (THRESHOLD_MAX - b->threshold_limit)); +} + +static ssize_t store_error_count(struct threshold_block *b, + const char *buf, size_t count) +{ + cpumask_t oldmask; + oldmask = affinity_set(b->cpu); + threshold_restart_bank(b, 1, 0); + affinity_restore(oldmask); + return 1; +} + +#define THRESHOLD_ATTR(_name,_mode,_show,_store) { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .show = _show, \ + .store = _store, \ +}; + +#define RW_ATTR(name) \ +static struct threshold_attr name = \ + THRESHOLD_ATTR(name, 0644, show_## name, store_## name) + +RW_ATTR(interrupt_enable); +RW_ATTR(threshold_limit); +RW_ATTR(error_count); + +static struct attribute *default_attrs[] = { + &interrupt_enable.attr, + &threshold_limit.attr, + &error_count.attr, + NULL +}; + +#define to_block(k) container_of(k, struct threshold_block, kobj) +#define to_attr(a) container_of(a, struct threshold_attr, attr) + +static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) +{ + struct threshold_block *b = to_block(kobj); + struct threshold_attr *a = to_attr(attr); + ssize_t ret; + ret = a->show ? a->show(b, buf) : -EIO; + return ret; +} + +static ssize_t store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct threshold_block *b = to_block(kobj); + struct threshold_attr *a = to_attr(attr); + ssize_t ret; + ret = a->store ? a->store(b, buf, count) : -EIO; + return ret; +} + +static struct sysfs_ops threshold_ops = { + .show = show, + .store = store, +}; + +static struct kobj_type threshold_ktype = { + .sysfs_ops = &threshold_ops, + .default_attrs = default_attrs, +}; + +static __cpuinit int allocate_threshold_blocks(unsigned int cpu, + unsigned int bank, + unsigned int block, + u32 address) +{ + int err; + u32 low, high; + struct threshold_block *b = NULL; + + if ((bank >= NR_BANKS) || (block >= NR_BLOCKS)) + return 0; + + if (rdmsr_safe(address, &low, &high)) + return 0; + + if (!(high & MASK_VALID_HI)) { + if (block) + goto recurse; + else + return 0; + } + + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) + goto recurse; + + b = kzalloc(sizeof(struct threshold_block), GFP_KERNEL); + if (!b) + return -ENOMEM; + + b->block = block; + b->bank = bank; + b->cpu = cpu; + b->address = address; + b->interrupt_enable = 0; + b->threshold_limit = THRESHOLD_MAX; + + INIT_LIST_HEAD(&b->miscj); + + if (per_cpu(threshold_banks, cpu)[bank]->blocks) + list_add(&b->miscj, + &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj); + else + per_cpu(threshold_banks, cpu)[bank]->blocks = b; + + kobject_set_name(&b->kobj, "misc%i", block); + b->kobj.parent = &per_cpu(threshold_banks, cpu)[bank]->kobj; + b->kobj.ktype = &threshold_ktype; + err = kobject_register(&b->kobj); + if (err) + goto out_free; +recurse: + if (!block) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + return 0; + address += MCG_XBLK_ADDR; + } else + ++address; + + err = allocate_threshold_blocks(cpu, bank, ++block, address); + if (err) + goto out_free; + + return err; + +out_free: + if (b) { + kobject_unregister(&b->kobj); + kfree(b); + } + return err; +} + +/* symlinks sibling shared banks to first core. first core owns dir/files. */ +static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) +{ + int i, err = 0; + struct threshold_bank *b = NULL; + cpumask_t oldmask = CPU_MASK_NONE; + char name[32]; + + sprintf(name, "threshold_bank%i", bank); + +#ifdef CONFIG_SMP + if (cpu_data[cpu].cpu_core_id && shared_bank[bank]) { /* symlink */ + i = first_cpu(cpu_core_map[cpu]); + + /* first core not up yet */ + if (cpu_data[i].cpu_core_id) + goto out; + + /* already linked */ + if (per_cpu(threshold_banks, cpu)[bank]) + goto out; + + b = per_cpu(threshold_banks, i)[bank]; + + if (!b) + goto out; + + err = sysfs_create_link(&per_cpu(device_mce, cpu).kobj, + &b->kobj, name); + if (err) + goto out; + + b->cpus = cpu_core_map[cpu]; + per_cpu(threshold_banks, cpu)[bank] = b; + goto out; + } +#endif + + b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL); + if (!b) { + err = -ENOMEM; + goto out; + } + + kobject_set_name(&b->kobj, "threshold_bank%i", bank); + b->kobj.parent = &per_cpu(device_mce, cpu).kobj; +#ifndef CONFIG_SMP + b->cpus = CPU_MASK_ALL; +#else + b->cpus = cpu_core_map[cpu]; +#endif + err = kobject_register(&b->kobj); + if (err) + goto out_free; + + per_cpu(threshold_banks, cpu)[bank] = b; + + oldmask = affinity_set(cpu); + err = allocate_threshold_blocks(cpu, bank, 0, + MSR_IA32_MC0_MISC + bank * 4); + affinity_restore(oldmask); + + if (err) + goto out_free; + + for_each_cpu_mask(i, b->cpus) { + if (i == cpu) + continue; + + err = sysfs_create_link(&per_cpu(device_mce, i).kobj, + &b->kobj, name); + if (err) + goto out; + + per_cpu(threshold_banks, i)[bank] = b; + } + + goto out; + +out_free: + per_cpu(threshold_banks, cpu)[bank] = NULL; + kfree(b); +out: + return err; +} + +/* create dir/files for all valid threshold banks */ +static __cpuinit int threshold_create_device(unsigned int cpu) +{ + unsigned int bank; + int err = 0; + + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & 1 << bank)) + continue; + err = threshold_create_bank(cpu, bank); + if (err) + goto out; + } +out: + return err; +} + +/* + * let's be hotplug friendly. + * in case of multiple core processors, the first core always takes ownership + * of shared sysfs dir/files, and rest of the cores will be symlinked to it. + */ + +static void deallocate_threshold_block(unsigned int cpu, + unsigned int bank) +{ + struct threshold_block *pos = NULL; + struct threshold_block *tmp = NULL; + struct threshold_bank *head = per_cpu(threshold_banks, cpu)[bank]; + + if (!head) + return; + + list_for_each_entry_safe(pos, tmp, &head->blocks->miscj, miscj) { + kobject_unregister(&pos->kobj); + list_del(&pos->miscj); + kfree(pos); + } + + kfree(per_cpu(threshold_banks, cpu)[bank]->blocks); + per_cpu(threshold_banks, cpu)[bank]->blocks = NULL; +} + +static void threshold_remove_bank(unsigned int cpu, int bank) +{ + int i = 0; + struct threshold_bank *b; + char name[32]; + + b = per_cpu(threshold_banks, cpu)[bank]; + + if (!b) + return; + + if (!b->blocks) + goto free_out; + + sprintf(name, "threshold_bank%i", bank); + +#ifdef CONFIG_SMP + /* sibling symlink */ + if (shared_bank[bank] && b->blocks->cpu != cpu) { + sysfs_remove_link(&per_cpu(device_mce, cpu).kobj, name); + per_cpu(threshold_banks, cpu)[bank] = NULL; + return; + } +#endif + + /* remove all sibling symlinks before unregistering */ + for_each_cpu_mask(i, b->cpus) { + if (i == cpu) + continue; + + sysfs_remove_link(&per_cpu(device_mce, i).kobj, name); + per_cpu(threshold_banks, i)[bank] = NULL; + } + + deallocate_threshold_block(cpu, bank); + +free_out: + kobject_unregister(&b->kobj); + kfree(b); + per_cpu(threshold_banks, cpu)[bank] = NULL; +} + +static void threshold_remove_device(unsigned int cpu) +{ + unsigned int bank; + + for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, cpu) & 1 << bank)) + continue; + threshold_remove_bank(cpu, bank); + } +} + +/* get notified when a cpu comes on/off */ +static int threshold_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + /* cpu was unsigned int to begin with */ + unsigned int cpu = (unsigned long)hcpu; + + if (cpu >= NR_CPUS) + goto out; + + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + threshold_create_device(cpu); + break; + case CPU_DEAD: + case CPU_DEAD_FROZEN: + threshold_remove_device(cpu); + break; + default: + break; + } + out: + return NOTIFY_OK; +} + +static struct notifier_block threshold_cpu_notifier = { + .notifier_call = threshold_cpu_callback, +}; + +static __init int threshold_init_device(void) +{ + unsigned lcpu = 0; + + /* to hit CPUs online before the notifier is up */ + for_each_online_cpu(lcpu) { + int err = threshold_create_device(lcpu); + if (err) + return err; + } + register_hotcpu_notifier(&threshold_cpu_notifier); + return 0; +} + +device_initcall(threshold_init_device); diff --git a/arch/x86/kernel/mce_intel_64.c b/arch/x86/kernel/mce_intel_64.c new file mode 100644 index 000000000000..6551505d8a2c --- /dev/null +++ b/arch/x86/kernel/mce_intel_64.c @@ -0,0 +1,89 @@ +/* + * Intel specific MCE features. + * Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca> + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/percpu.h> +#include <asm/processor.h> +#include <asm/msr.h> +#include <asm/mce.h> +#include <asm/hw_irq.h> +#include <asm/idle.h> +#include <asm/therm_throt.h> + +asmlinkage void smp_thermal_interrupt(void) +{ + __u64 msr_val; + + ack_APIC_irq(); + + exit_idle(); + irq_enter(); + + rdmsrl(MSR_IA32_THERM_STATUS, msr_val); + if (therm_throt_process(msr_val & 1)) + mce_log_therm_throt_event(smp_processor_id(), msr_val); + + irq_exit(); +} + +static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c) +{ + u32 l, h; + int tm2 = 0; + unsigned int cpu = smp_processor_id(); + + if (!cpu_has(c, X86_FEATURE_ACPI)) + return; + + if (!cpu_has(c, X86_FEATURE_ACC)) + return; + + /* first check if TM1 is already enabled by the BIOS, in which + * case there might be some SMM goo which handles it, so we can't even + * put a handler since it might be delivered via SMI already. + */ + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + h = apic_read(APIC_LVTTHMR); + if ((l & (1 << 3)) && (h & APIC_DM_SMI)) { + printk(KERN_DEBUG + "CPU%d: Thermal monitoring handled by SMI\n", cpu); + return; + } + + if (cpu_has(c, X86_FEATURE_TM2) && (l & (1 << 13))) + tm2 = 1; + + if (h & APIC_VECTOR_MASK) { + printk(KERN_DEBUG + "CPU%d: Thermal LVT vector (%#x) already " + "installed\n", cpu, (h & APIC_VECTOR_MASK)); + return; + } + + h = THERMAL_APIC_VECTOR; + h |= (APIC_DM_FIXED | APIC_LVT_MASKED); + apic_write(APIC_LVTTHMR, h); + + rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); + wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h); + + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + wrmsr(MSR_IA32_MISC_ENABLE, l | (1 << 3), h); + + l = apic_read(APIC_LVTTHMR); + apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); + printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n", + cpu, tm2 ? "TM2" : "TM1"); + + /* enable thermal throttle processing */ + atomic_set(&therm_throt_en, 1); + return; +} + +void __cpuinit mce_intel_feature_init(struct cpuinfo_x86 *c) +{ + intel_init_thermal(c); +} diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c new file mode 100644 index 000000000000..09cf78110358 --- /dev/null +++ b/arch/x86/kernel/microcode.c @@ -0,0 +1,850 @@ +/* + * Intel CPU Microcode Update Driver for Linux + * + * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk> + * 2006 Shaohua Li <shaohua.li@intel.com> + * + * This driver allows to upgrade microcode on Intel processors + * belonging to IA-32 family - PentiumPro, Pentium II, + * Pentium III, Xeon, Pentium 4, etc. + * + * Reference: Section 8.10 of Volume III, Intel Pentium 4 Manual, + * Order Number 245472 or free download from: + * + * http://developer.intel.com/design/pentium4/manuals/245472.htm + * + * For more information, go to http://www.urbanmyth.org/microcode + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Initial release. + * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added read() support + cleanups. + * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added 'device trimming' support. open(O_WRONLY) zeroes + * and frees the saved copy of applied microcode. + * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Made to use devfs (/dev/cpu/microcode) + cleanups. + * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com> + * Added misc device support (now uses both devfs and misc). + * Added MICROCODE_IOCFREE ioctl to clear memory. + * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com> + * Messages for error cases (non Intel & no suitable microcode). + * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com> + * Removed ->release(). Removed exclusive open and status bitmap. + * Added microcode_rwsem to serialize read()/write()/ioctl(). + * Removed global kernel lock usage. + * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com> + * Write 0 to 0x8B msr and then cpuid before reading revision, + * so that it works even if there were no update done by the + * BIOS. Otherwise, reading from 0x8B gives junk (which happened + * to be 0 on my machine which is why it worked even when I + * disabled update by the BIOS) + * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix. + * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and + * Tigran Aivazian <tigran@veritas.com> + * Intel Pentium 4 processor support and bugfixes. + * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com> + * Bugfix for HT (Hyper-Threading) enabled processors + * whereby processor resources are shared by all logical processors + * in a single CPU package. + * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and + * Tigran Aivazian <tigran@veritas.com>, + * Serialize updates as required on HT processors due to speculative + * nature of implementation. + * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> + * Fix the panic when writing zero-length microcode chunk. + * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, + * Jun Nakajima <jun.nakajima@intel.com> + * Support for the microcode updates in the new format. + * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> + * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl + * because we no longer hold a copy of applied microcode + * in kernel memory. + * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> + * Fix sigmatch() macro to handle old CPUs with pf == 0. + * Thanks to Stuart Swales for pointing out this bug. + */ + +//#define DEBUG /* pr_debug */ +#include <linux/capability.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/miscdevice.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/mutex.h> +#include <linux/cpu.h> +#include <linux/firmware.h> +#include <linux/platform_device.h> + +#include <asm/msr.h> +#include <asm/uaccess.h> +#include <asm/processor.h> + +MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver"); +MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>"); +MODULE_LICENSE("GPL"); + +#define MICROCODE_VERSION "1.14a" + +#define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */ +#define MC_HEADER_SIZE (sizeof (microcode_header_t)) /* 48 bytes */ +#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /* 2048 bytes */ +#define EXT_HEADER_SIZE (sizeof (struct extended_sigtable)) /* 20 bytes */ +#define EXT_SIGNATURE_SIZE (sizeof (struct extended_signature)) /* 12 bytes */ +#define DWSIZE (sizeof (u32)) +#define get_totalsize(mc) \ + (((microcode_t *)mc)->hdr.totalsize ? \ + ((microcode_t *)mc)->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE) +#define get_datasize(mc) \ + (((microcode_t *)mc)->hdr.datasize ? \ + ((microcode_t *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE) + +#define sigmatch(s1, s2, p1, p2) \ + (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0)))) + +#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) + +/* serialize access to the physical write to MSR 0x79 */ +static DEFINE_SPINLOCK(microcode_update_lock); + +/* no concurrent ->write()s are allowed on /dev/cpu/microcode */ +static DEFINE_MUTEX(microcode_mutex); + +static struct ucode_cpu_info { + int valid; + unsigned int sig; + unsigned int pf; + unsigned int rev; + microcode_t *mc; +} ucode_cpu_info[NR_CPUS]; + +static void collect_cpu_info(int cpu_num) +{ + struct cpuinfo_x86 *c = cpu_data + cpu_num; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; + unsigned int val[2]; + + /* We should bind the task to the CPU */ + BUG_ON(raw_smp_processor_id() != cpu_num); + uci->pf = uci->rev = 0; + uci->mc = NULL; + uci->valid = 1; + + if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || + cpu_has(c, X86_FEATURE_IA64)) { + printk(KERN_ERR "microcode: CPU%d not a capable Intel " + "processor\n", cpu_num); + uci->valid = 0; + return; + } + + uci->sig = cpuid_eax(0x00000001); + + if ((c->x86_model >= 5) || (c->x86 > 6)) { + /* get processor flags from MSR 0x17 */ + rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); + uci->pf = 1 << ((val[1] >> 18) & 7); + } + + wrmsr(MSR_IA32_UCODE_REV, 0, 0); + /* see notes above for revision 1.07. Apparent chip bug */ + sync_core(); + /* get the current revision from MSR 0x8B */ + rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev); + pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", + uci->sig, uci->pf, uci->rev); +} + +static inline int microcode_update_match(int cpu_num, + microcode_header_t *mc_header, int sig, int pf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; + + if (!sigmatch(sig, uci->sig, pf, uci->pf) + || mc_header->rev <= uci->rev) + return 0; + return 1; +} + +static int microcode_sanity_check(void *mc) +{ + microcode_header_t *mc_header = mc; + struct extended_sigtable *ext_header = NULL; + struct extended_signature *ext_sig; + unsigned long total_size, data_size, ext_table_size; + int sum, orig_sum, ext_sigcount = 0, i; + + total_size = get_totalsize(mc_header); + data_size = get_datasize(mc_header); + if (data_size + MC_HEADER_SIZE > total_size) { + printk(KERN_ERR "microcode: error! " + "Bad data size in microcode data file\n"); + return -EINVAL; + } + + if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { + printk(KERN_ERR "microcode: error! " + "Unknown microcode update format\n"); + return -EINVAL; + } + ext_table_size = total_size - (MC_HEADER_SIZE + data_size); + if (ext_table_size) { + if ((ext_table_size < EXT_HEADER_SIZE) + || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { + printk(KERN_ERR "microcode: error! " + "Small exttable size in microcode data file\n"); + return -EINVAL; + } + ext_header = mc + MC_HEADER_SIZE + data_size; + if (ext_table_size != exttable_size(ext_header)) { + printk(KERN_ERR "microcode: error! " + "Bad exttable size in microcode data file\n"); + return -EFAULT; + } + ext_sigcount = ext_header->count; + } + + /* check extended table checksum */ + if (ext_table_size) { + int ext_table_sum = 0; + int *ext_tablep = (int *)ext_header; + + i = ext_table_size / DWSIZE; + while (i--) + ext_table_sum += ext_tablep[i]; + if (ext_table_sum) { + printk(KERN_WARNING "microcode: aborting, " + "bad extended signature table checksum\n"); + return -EINVAL; + } + } + + /* calculate the checksum */ + orig_sum = 0; + i = (MC_HEADER_SIZE + data_size) / DWSIZE; + while (i--) + orig_sum += ((int *)mc)[i]; + if (orig_sum) { + printk(KERN_ERR "microcode: aborting, bad checksum\n"); + return -EINVAL; + } + if (!ext_table_size) + return 0; + /* check extended signature checksum */ + for (i = 0; i < ext_sigcount; i++) { + ext_sig = (struct extended_signature *)((void *)ext_header + + EXT_HEADER_SIZE + EXT_SIGNATURE_SIZE * i); + sum = orig_sum + - (mc_header->sig + mc_header->pf + mc_header->cksum) + + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); + if (sum) { + printk(KERN_ERR "microcode: aborting, bad checksum\n"); + return -EINVAL; + } + } + return 0; +} + +/* + * return 0 - no update found + * return 1 - found update + * return < 0 - error + */ +static int get_maching_microcode(void *mc, int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + microcode_header_t *mc_header = mc; + struct extended_sigtable *ext_header; + unsigned long total_size = get_totalsize(mc_header); + int ext_sigcount, i; + struct extended_signature *ext_sig; + void *new_mc; + + if (microcode_update_match(cpu, mc_header, + mc_header->sig, mc_header->pf)) + goto find; + + if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE) + return 0; + + ext_header = (struct extended_sigtable *)(mc + + get_datasize(mc_header) + MC_HEADER_SIZE); + ext_sigcount = ext_header->count; + ext_sig = (struct extended_signature *)((void *)ext_header + + EXT_HEADER_SIZE); + for (i = 0; i < ext_sigcount; i++) { + if (microcode_update_match(cpu, mc_header, + ext_sig->sig, ext_sig->pf)) + goto find; + ext_sig++; + } + return 0; +find: + pr_debug("microcode: CPU %d found a matching microcode update with" + " version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev); + new_mc = vmalloc(total_size); + if (!new_mc) { + printk(KERN_ERR "microcode: error! Can not allocate memory\n"); + return -ENOMEM; + } + + /* free previous update file */ + vfree(uci->mc); + + memcpy(new_mc, mc, total_size); + uci->mc = new_mc; + return 1; +} + +static void apply_microcode(int cpu) +{ + unsigned long flags; + unsigned int val[2]; + int cpu_num = raw_smp_processor_id(); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; + + /* We should bind the task to the CPU */ + BUG_ON(cpu_num != cpu); + + if (uci->mc == NULL) + return; + + /* serialize access to the physical write to MSR 0x79 */ + spin_lock_irqsave(µcode_update_lock, flags); + + /* write microcode via MSR 0x79 */ + wrmsr(MSR_IA32_UCODE_WRITE, + (unsigned long) uci->mc->bits, + (unsigned long) uci->mc->bits >> 16 >> 16); + wrmsr(MSR_IA32_UCODE_REV, 0, 0); + + /* see notes above for revision 1.07. Apparent chip bug */ + sync_core(); + + /* get the current revision from MSR 0x8B */ + rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); + + spin_unlock_irqrestore(µcode_update_lock, flags); + if (val[1] != uci->mc->hdr.rev) { + printk(KERN_ERR "microcode: CPU%d updated from revision " + "0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]); + return; + } + pr_debug("microcode: CPU%d updated from revision " + "0x%x to 0x%x, date = %08x \n", + cpu_num, uci->rev, val[1], uci->mc->hdr.date); + uci->rev = val[1]; +} + +#ifdef CONFIG_MICROCODE_OLD_INTERFACE +static void __user *user_buffer; /* user area microcode data buffer */ +static unsigned int user_buffer_size; /* it's size */ + +static long get_next_ucode(void **mc, long offset) +{ + microcode_header_t mc_header; + unsigned long total_size; + + /* No more data */ + if (offset >= user_buffer_size) + return 0; + if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) { + printk(KERN_ERR "microcode: error! Can not read user data\n"); + return -EFAULT; + } + total_size = get_totalsize(&mc_header); + if (offset + total_size > user_buffer_size) { + printk(KERN_ERR "microcode: error! Bad total size in microcode " + "data file\n"); + return -EINVAL; + } + *mc = vmalloc(total_size); + if (!*mc) + return -ENOMEM; + if (copy_from_user(*mc, user_buffer + offset, total_size)) { + printk(KERN_ERR "microcode: error! Can not read user data\n"); + vfree(*mc); + return -EFAULT; + } + return offset + total_size; +} + +static int do_microcode_update (void) +{ + long cursor = 0; + int error = 0; + void *new_mc = NULL; + int cpu; + cpumask_t old; + + old = current->cpus_allowed; + + while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) { + error = microcode_sanity_check(new_mc); + if (error) + goto out; + /* + * It's possible the data file has multiple matching ucode, + * lets keep searching till the latest version + */ + for_each_online_cpu(cpu) { + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (!uci->valid) + continue; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + error = get_maching_microcode(new_mc, cpu); + if (error < 0) + goto out; + if (error == 1) + apply_microcode(cpu); + } + vfree(new_mc); + } +out: + if (cursor > 0) + vfree(new_mc); + if (cursor < 0) + error = cursor; + set_cpus_allowed(current, old); + return error; +} + +static int microcode_open (struct inode *unused1, struct file *unused2) +{ + return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; +} + +static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos) +{ + ssize_t ret; + + if ((len >> PAGE_SHIFT) > num_physpages) { + printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages); + return -EINVAL; + } + + lock_cpu_hotplug(); + mutex_lock(µcode_mutex); + + user_buffer = (void __user *) buf; + user_buffer_size = (int) len; + + ret = do_microcode_update(); + if (!ret) + ret = (ssize_t)len; + + mutex_unlock(µcode_mutex); + unlock_cpu_hotplug(); + + return ret; +} + +static const struct file_operations microcode_fops = { + .owner = THIS_MODULE, + .write = microcode_write, + .open = microcode_open, +}; + +static struct miscdevice microcode_dev = { + .minor = MICROCODE_MINOR, + .name = "microcode", + .fops = µcode_fops, +}; + +static int __init microcode_dev_init (void) +{ + int error; + + error = misc_register(µcode_dev); + if (error) { + printk(KERN_ERR + "microcode: can't misc_register on minor=%d\n", + MICROCODE_MINOR); + return error; + } + + return 0; +} + +static void microcode_dev_exit (void) +{ + misc_deregister(µcode_dev); +} + +MODULE_ALIAS_MISCDEV(MICROCODE_MINOR); +#else +#define microcode_dev_init() 0 +#define microcode_dev_exit() do { } while(0) +#endif + +static long get_next_ucode_from_buffer(void **mc, void *buf, + unsigned long size, long offset) +{ + microcode_header_t *mc_header; + unsigned long total_size; + + /* No more data */ + if (offset >= size) + return 0; + mc_header = (microcode_header_t *)(buf + offset); + total_size = get_totalsize(mc_header); + + if (offset + total_size > size) { + printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); + return -EINVAL; + } + + *mc = vmalloc(total_size); + if (!*mc) { + printk(KERN_ERR "microcode: error! Can not allocate memory\n"); + return -ENOMEM; + } + memcpy(*mc, buf + offset, total_size); + return offset + total_size; +} + +/* fake device for request_firmware */ +static struct platform_device *microcode_pdev; + +static int cpu_request_microcode(int cpu) +{ + char name[30]; + struct cpuinfo_x86 *c = cpu_data + cpu; + const struct firmware *firmware; + void *buf; + unsigned long size; + long offset = 0; + int error; + void *mc; + + /* We should bind the task to the CPU */ + BUG_ON(cpu != raw_smp_processor_id()); + sprintf(name,"intel-ucode/%02x-%02x-%02x", + c->x86, c->x86_model, c->x86_mask); + error = request_firmware(&firmware, name, µcode_pdev->dev); + if (error) { + pr_debug("ucode data file %s load failed\n", name); + return error; + } + buf = (void *)firmware->data; + size = firmware->size; + while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset)) + > 0) { + error = microcode_sanity_check(mc); + if (error) + break; + error = get_maching_microcode(mc, cpu); + if (error < 0) + break; + /* + * It's possible the data file has multiple matching ucode, + * lets keep searching till the latest version + */ + if (error == 1) { + apply_microcode(cpu); + error = 0; + } + vfree(mc); + } + if (offset > 0) + vfree(mc); + if (offset < 0) + error = offset; + release_firmware(firmware); + + return error; +} + +static int apply_microcode_check_cpu(int cpu) +{ + struct cpuinfo_x86 *c = cpu_data + cpu; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + cpumask_t old; + unsigned int val[2]; + int err = 0; + + /* Check if the microcode is available */ + if (!uci->mc) + return 0; + + old = current->cpus_allowed; + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + + /* Check if the microcode we have in memory matches the CPU */ + if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || + cpu_has(c, X86_FEATURE_IA64) || uci->sig != cpuid_eax(0x00000001)) + err = -EINVAL; + + if (!err && ((c->x86_model >= 5) || (c->x86 > 6))) { + /* get processor flags from MSR 0x17 */ + rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); + if (uci->pf != (1 << ((val[1] >> 18) & 7))) + err = -EINVAL; + } + + if (!err) { + wrmsr(MSR_IA32_UCODE_REV, 0, 0); + /* see notes above for revision 1.07. Apparent chip bug */ + sync_core(); + /* get the current revision from MSR 0x8B */ + rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); + if (uci->rev != val[1]) + err = -EINVAL; + } + + if (!err) + apply_microcode(cpu); + else + printk(KERN_ERR "microcode: Could not apply microcode to CPU%d:" + " sig=0x%x, pf=0x%x, rev=0x%x\n", + cpu, uci->sig, uci->pf, uci->rev); + + set_cpus_allowed(current, old); + return err; +} + +static void microcode_init_cpu(int cpu, int resume) +{ + cpumask_t old; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + old = current->cpus_allowed; + + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + mutex_lock(µcode_mutex); + collect_cpu_info(cpu); + if (uci->valid && system_state == SYSTEM_RUNNING && !resume) + cpu_request_microcode(cpu); + mutex_unlock(µcode_mutex); + set_cpus_allowed(current, old); +} + +static void microcode_fini_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + mutex_lock(µcode_mutex); + uci->valid = 0; + vfree(uci->mc); + uci->mc = NULL; + mutex_unlock(µcode_mutex); +} + +static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + char *end; + unsigned long val = simple_strtoul(buf, &end, 0); + int err = 0; + int cpu = dev->id; + + if (end == buf) + return -EINVAL; + if (val == 1) { + cpumask_t old; + + old = current->cpus_allowed; + + lock_cpu_hotplug(); + set_cpus_allowed(current, cpumask_of_cpu(cpu)); + + mutex_lock(µcode_mutex); + if (uci->valid) + err = cpu_request_microcode(cpu); + mutex_unlock(µcode_mutex); + unlock_cpu_hotplug(); + set_cpus_allowed(current, old); + } + if (err) + return err; + return sz; +} + +static ssize_t version_show(struct sys_device *dev, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->rev); +} + +static ssize_t pf_show(struct sys_device *dev, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->pf); +} + +static SYSDEV_ATTR(reload, 0200, NULL, reload_store); +static SYSDEV_ATTR(version, 0400, version_show, NULL); +static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL); + +static struct attribute *mc_default_attrs[] = { + &attr_reload.attr, + &attr_version.attr, + &attr_processor_flags.attr, + NULL +}; + +static struct attribute_group mc_attr_group = { + .attrs = mc_default_attrs, + .name = "microcode", +}; + +static int __mc_sysdev_add(struct sys_device *sys_dev, int resume) +{ + int err, cpu = sys_dev->id; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (!cpu_online(cpu)) + return 0; + + pr_debug("Microcode:CPU %d added\n", cpu); + memset(uci, 0, sizeof(*uci)); + + err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); + if (err) + return err; + + microcode_init_cpu(cpu, resume); + + return 0; +} + +static int mc_sysdev_add(struct sys_device *sys_dev) +{ + return __mc_sysdev_add(sys_dev, 0); +} + +static int mc_sysdev_remove(struct sys_device *sys_dev) +{ + int cpu = sys_dev->id; + + if (!cpu_online(cpu)) + return 0; + + pr_debug("Microcode:CPU %d removed\n", cpu); + microcode_fini_cpu(cpu); + sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + return 0; +} + +static int mc_sysdev_resume(struct sys_device *dev) +{ + int cpu = dev->id; + + if (!cpu_online(cpu)) + return 0; + pr_debug("Microcode:CPU %d resumed\n", cpu); + /* only CPU 0 will apply ucode here */ + apply_microcode(0); + return 0; +} + +static struct sysdev_driver mc_sysdev_driver = { + .add = mc_sysdev_add, + .remove = mc_sysdev_remove, + .resume = mc_sysdev_resume, +}; + +static __cpuinit int +mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct sys_device *sys_dev; + + sys_dev = get_cpu_sysdev(cpu); + switch (action) { + case CPU_UP_CANCELED_FROZEN: + /* The CPU refused to come up during a system resume */ + microcode_fini_cpu(cpu); + break; + case CPU_ONLINE: + case CPU_DOWN_FAILED: + mc_sysdev_add(sys_dev); + break; + case CPU_ONLINE_FROZEN: + /* System-wide resume is in progress, try to apply microcode */ + if (apply_microcode_check_cpu(cpu)) { + /* The application of microcode failed */ + microcode_fini_cpu(cpu); + __mc_sysdev_add(sys_dev, 1); + break; + } + case CPU_DOWN_FAILED_FROZEN: + if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) + printk(KERN_ERR "Microcode: Failed to create the sysfs " + "group for CPU%d\n", cpu); + break; + case CPU_DOWN_PREPARE: + mc_sysdev_remove(sys_dev); + break; + case CPU_DOWN_PREPARE_FROZEN: + /* Suspend is in progress, only remove the interface */ + sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata mc_cpu_notifier = { + .notifier_call = mc_cpu_callback, +}; + +static int __init microcode_init (void) +{ + int error; + + error = microcode_dev_init(); + if (error) + return error; + microcode_pdev = platform_device_register_simple("microcode", -1, + NULL, 0); + if (IS_ERR(microcode_pdev)) { + microcode_dev_exit(); + return PTR_ERR(microcode_pdev); + } + + lock_cpu_hotplug(); + error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver); + unlock_cpu_hotplug(); + if (error) { + microcode_dev_exit(); + platform_device_unregister(microcode_pdev); + return error; + } + + register_hotcpu_notifier(&mc_cpu_notifier); + + printk(KERN_INFO + "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n"); + return 0; +} + +static void __exit microcode_exit (void) +{ + microcode_dev_exit(); + + unregister_hotcpu_notifier(&mc_cpu_notifier); + + lock_cpu_hotplug(); + sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); + unlock_cpu_hotplug(); + + platform_device_unregister(microcode_pdev); +} + +module_init(microcode_init) +module_exit(microcode_exit) diff --git a/arch/x86/kernel/module_32.c b/arch/x86/kernel/module_32.c new file mode 100644 index 000000000000..3db0a5442eb1 --- /dev/null +++ b/arch/x86/kernel/module_32.c @@ -0,0 +1,152 @@ +/* Kernel module help for i386. + Copyright (C) 2001 Rusty Russell. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +#include <linux/moduleloader.h> +#include <linux/elf.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/bug.h> + +#if 0 +#define DEBUGP printk +#else +#define DEBUGP(fmt...) +#endif + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + return vmalloc_exec(size); +} + + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ +} + +/* We don't need anything special. */ +int module_frob_arch_sections(Elf_Ehdr *hdr, + Elf_Shdr *sechdrs, + char *secstrings, + struct module *mod) +{ + return 0; +} + +int apply_relocate(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + unsigned int i; + Elf32_Rel *rel = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + uint32_t *location; + + DEBUGP("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rel[i].r_info); + + switch (ELF32_R_TYPE(rel[i].r_info)) { + case R_386_32: + /* We add the value into the location given */ + *location += sym->st_value; + break; + case R_386_PC32: + /* Add the value, subtract its postition */ + *location += sym->st_value - (uint32_t)location; + break; + default: + printk(KERN_ERR "module %s: Unknown relocation: %u\n", + me->name, ELF32_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } + } + return 0; +} + +int apply_relocate_add(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n", + me->name); + return -ENOEXEC; +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *me) +{ + const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL, + *para = NULL; + char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { + if (!strcmp(".text", secstrings + s->sh_name)) + text = s; + if (!strcmp(".altinstructions", secstrings + s->sh_name)) + alt = s; + if (!strcmp(".smp_locks", secstrings + s->sh_name)) + locks= s; + if (!strcmp(".parainstructions", secstrings + s->sh_name)) + para = s; + } + + if (alt) { + /* patch .altinstructions */ + void *aseg = (void *)alt->sh_addr; + apply_alternatives(aseg, aseg + alt->sh_size); + } + if (locks && text) { + void *lseg = (void *)locks->sh_addr; + void *tseg = (void *)text->sh_addr; + alternatives_smp_module_add(me, me->name, + lseg, lseg + locks->sh_size, + tseg, tseg + text->sh_size); + } + + if (para) { + void *pseg = (void *)para->sh_addr; + apply_paravirt(pseg, pseg + para->sh_size); + } + + return module_bug_finalize(hdr, sechdrs, me); +} + +void module_arch_cleanup(struct module *mod) +{ + alternatives_smp_module_del(mod); + module_bug_cleanup(mod); +} diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module_64.c new file mode 100644 index 000000000000..a888e67f5874 --- /dev/null +++ b/arch/x86/kernel/module_64.c @@ -0,0 +1,185 @@ +/* Kernel module help for x86-64 + Copyright (C) 2001 Rusty Russell. + Copyright (C) 2002,2003 Andi Kleen, SuSE Labs. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +#include <linux/moduleloader.h> +#include <linux/elf.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/bug.h> + +#include <asm/system.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +#define DEBUGP(fmt...) + +#ifndef CONFIG_UML +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ +} + +void *module_alloc(unsigned long size) +{ + struct vm_struct *area; + + if (!size) + return NULL; + size = PAGE_ALIGN(size); + if (size > MODULES_LEN) + return NULL; + + area = __get_vm_area(size, VM_ALLOC, MODULES_VADDR, MODULES_END); + if (!area) + return NULL; + + return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC); +} +#endif + +/* We don't need anything special. */ +int module_frob_arch_sections(Elf_Ehdr *hdr, + Elf_Shdr *sechdrs, + char *secstrings, + struct module *mod) +{ + return 0; +} + +int apply_relocate_add(Elf64_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + unsigned int i; + Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr; + Elf64_Sym *sym; + void *loc; + u64 val; + + DEBUGP("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + /* This is where to make the change */ + loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + sym = (Elf64_Sym *)sechdrs[symindex].sh_addr + + ELF64_R_SYM(rel[i].r_info); + + DEBUGP("type %d st_value %Lx r_addend %Lx loc %Lx\n", + (int)ELF64_R_TYPE(rel[i].r_info), + sym->st_value, rel[i].r_addend, (u64)loc); + + val = sym->st_value + rel[i].r_addend; + + switch (ELF64_R_TYPE(rel[i].r_info)) { + case R_X86_64_NONE: + break; + case R_X86_64_64: + *(u64 *)loc = val; + break; + case R_X86_64_32: + *(u32 *)loc = val; + if (val != *(u32 *)loc) + goto overflow; + break; + case R_X86_64_32S: + *(s32 *)loc = val; + if ((s64)val != *(s32 *)loc) + goto overflow; + break; + case R_X86_64_PC32: + val -= (u64)loc; + *(u32 *)loc = val; +#if 0 + if ((s64)val != *(s32 *)loc) + goto overflow; +#endif + break; + default: + printk(KERN_ERR "module %s: Unknown rela relocation: %Lu\n", + me->name, ELF64_R_TYPE(rel[i].r_info)); + return -ENOEXEC; + } + } + return 0; + +overflow: + printk(KERN_ERR "overflow in relocation type %d val %Lx\n", + (int)ELF64_R_TYPE(rel[i].r_info), val); + printk(KERN_ERR "`%s' likely not compiled with -mcmodel=kernel\n", + me->name); + return -ENOEXEC; +} + +int apply_relocate(Elf_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + printk("non add relocation not supported\n"); + return -ENOSYS; +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *me) +{ + const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL; + char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { + if (!strcmp(".text", secstrings + s->sh_name)) + text = s; + if (!strcmp(".altinstructions", secstrings + s->sh_name)) + alt = s; + if (!strcmp(".smp_locks", secstrings + s->sh_name)) + locks= s; + } + + if (alt) { + /* patch .altinstructions */ + void *aseg = (void *)alt->sh_addr; + apply_alternatives(aseg, aseg + alt->sh_size); + } + if (locks && text) { + void *lseg = (void *)locks->sh_addr; + void *tseg = (void *)text->sh_addr; + alternatives_smp_module_add(me, me->name, + lseg, lseg + locks->sh_size, + tseg, tseg + text->sh_size); + } + + return module_bug_finalize(hdr, sechdrs, me); +} + +void module_arch_cleanup(struct module *mod) +{ + alternatives_smp_module_del(mod); + module_bug_cleanup(mod); +} diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse_32.c new file mode 100644 index 000000000000..13abb4ebfb79 --- /dev/null +++ b/arch/x86/kernel/mpparse_32.c @@ -0,0 +1,1132 @@ +/* + * Intel Multiprocessor Specification 1.1 and 1.4 + * compliant MP-table parsing routines. + * + * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> + * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> + * + * Fixes + * Erich Boleyn : MP v1.4 and additional changes. + * Alan Cox : Added EBDA scanning + * Ingo Molnar : various cleanups and rewrites + * Maciej W. Rozycki: Bits for default MP configurations + * Paul Diefenbaugh: Added full ACPI support + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/kernel_stat.h> +#include <linux/mc146818rtc.h> +#include <linux/bitops.h> + +#include <asm/smp.h> +#include <asm/acpi.h> +#include <asm/mtrr.h> +#include <asm/mpspec.h> +#include <asm/io_apic.h> + +#include <mach_apic.h> +#include <mach_apicdef.h> +#include <mach_mpparse.h> +#include <bios_ebda.h> + +/* Have we found an MP table */ +int smp_found_config; +unsigned int __cpuinitdata maxcpus = NR_CPUS; + +/* + * Various Linux-internal data structures created from the + * MP-table. + */ +int apic_version [MAX_APICS]; +int mp_bus_id_to_type [MAX_MP_BUSSES]; +int mp_bus_id_to_node [MAX_MP_BUSSES]; +int mp_bus_id_to_local [MAX_MP_BUSSES]; +int quad_local_to_mp_bus_id [NR_CPUS/4][4]; +int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; +static int mp_current_pci_id; + +/* I/O APIC entries */ +struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; + +/* # of MP IRQ source entries */ +struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; + +/* MP IRQ source entries */ +int mp_irq_entries; + +int nr_ioapics; + +int pic_mode; +unsigned long mp_lapic_addr; + +unsigned int def_to_bigsmp = 0; + +/* Processor that is doing the boot up */ +unsigned int boot_cpu_physical_apicid = -1U; +/* Internal processor count */ +unsigned int __cpuinitdata num_processors; + +/* Bitmask of physically existing CPUs */ +physid_mask_t phys_cpu_present_map; + +u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; + +/* + * Intel MP BIOS table parsing routines: + */ + + +/* + * Checksum an MP configuration block. + */ + +static int __init mpf_checksum(unsigned char *mp, int len) +{ + int sum = 0; + + while (len--) + sum += *mp++; + + return sum & 0xFF; +} + +/* + * Have to match translation table entries to main table entries by counter + * hence the mpc_record variable .... can't see a less disgusting way of + * doing this .... + */ + +static int mpc_record; +static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata; + +static void __cpuinit MP_processor_info (struct mpc_config_processor *m) +{ + int ver, apicid; + physid_mask_t phys_cpu; + + if (!(m->mpc_cpuflag & CPU_ENABLED)) + return; + + apicid = mpc_apic_id(m, translation_table[mpc_record]); + + if (m->mpc_featureflag&(1<<0)) + Dprintk(" Floating point unit present.\n"); + if (m->mpc_featureflag&(1<<7)) + Dprintk(" Machine Exception supported.\n"); + if (m->mpc_featureflag&(1<<8)) + Dprintk(" 64 bit compare & exchange supported.\n"); + if (m->mpc_featureflag&(1<<9)) + Dprintk(" Internal APIC present.\n"); + if (m->mpc_featureflag&(1<<11)) + Dprintk(" SEP present.\n"); + if (m->mpc_featureflag&(1<<12)) + Dprintk(" MTRR present.\n"); + if (m->mpc_featureflag&(1<<13)) + Dprintk(" PGE present.\n"); + if (m->mpc_featureflag&(1<<14)) + Dprintk(" MCA present.\n"); + if (m->mpc_featureflag&(1<<15)) + Dprintk(" CMOV present.\n"); + if (m->mpc_featureflag&(1<<16)) + Dprintk(" PAT present.\n"); + if (m->mpc_featureflag&(1<<17)) + Dprintk(" PSE present.\n"); + if (m->mpc_featureflag&(1<<18)) + Dprintk(" PSN present.\n"); + if (m->mpc_featureflag&(1<<19)) + Dprintk(" Cache Line Flush Instruction present.\n"); + /* 20 Reserved */ + if (m->mpc_featureflag&(1<<21)) + Dprintk(" Debug Trace and EMON Store present.\n"); + if (m->mpc_featureflag&(1<<22)) + Dprintk(" ACPI Thermal Throttle Registers present.\n"); + if (m->mpc_featureflag&(1<<23)) + Dprintk(" MMX present.\n"); + if (m->mpc_featureflag&(1<<24)) + Dprintk(" FXSR present.\n"); + if (m->mpc_featureflag&(1<<25)) + Dprintk(" XMM present.\n"); + if (m->mpc_featureflag&(1<<26)) + Dprintk(" Willamette New Instructions present.\n"); + if (m->mpc_featureflag&(1<<27)) + Dprintk(" Self Snoop present.\n"); + if (m->mpc_featureflag&(1<<28)) + Dprintk(" HT present.\n"); + if (m->mpc_featureflag&(1<<29)) + Dprintk(" Thermal Monitor present.\n"); + /* 30, 31 Reserved */ + + + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { + Dprintk(" Bootup CPU\n"); + boot_cpu_physical_apicid = m->mpc_apicid; + } + + ver = m->mpc_apicver; + + /* + * Validate version + */ + if (ver == 0x0) { + printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + m->mpc_apicid); + ver = 0x10; + } + apic_version[m->mpc_apicid] = ver; + + phys_cpu = apicid_to_cpu_present(apicid); + physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); + + if (num_processors >= NR_CPUS) { + printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." + " Processor ignored.\n", NR_CPUS); + return; + } + + if (num_processors >= maxcpus) { + printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." + " Processor ignored.\n", maxcpus); + return; + } + + cpu_set(num_processors, cpu_possible_map); + num_processors++; + + /* + * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y + * but we need to work other dependencies like SMP_SUSPEND etc + * before this can be done without some confusion. + * if (CPU_HOTPLUG_ENABLED || num_processors > 8) + * - Ashok Raj <ashok.raj@intel.com> + */ + if (num_processors > 8) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (!APIC_XAPIC(ver)) { + def_to_bigsmp = 0; + break; + } + /* If P4 and above fall through */ + case X86_VENDOR_AMD: + def_to_bigsmp = 1; + } + } + bios_cpu_apicid[num_processors - 1] = m->mpc_apicid; +} + +static void __init MP_bus_info (struct mpc_config_bus *m) +{ + char str[7]; + + memcpy(str, m->mpc_bustype, 6); + str[6] = 0; + + mpc_oem_bus_info(m, str, translation_table[mpc_record]); + +#if MAX_MP_BUSSES < 256 + if (m->mpc_busid >= MAX_MP_BUSSES) { + printk(KERN_WARNING "MP table busid value (%d) for bustype %s " + " is too large, max. supported is %d\n", + m->mpc_busid, str, MAX_MP_BUSSES - 1); + return; + } +#endif + + if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) { + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; + } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) { + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA; + } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) { + mpc_oem_pci_bus(m, translation_table[mpc_record]); + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; + mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; + mp_current_pci_id++; + } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) { + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA; + } else { + printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); + } +} + +static void __init MP_ioapic_info (struct mpc_config_ioapic *m) +{ + if (!(m->mpc_flags & MPC_APIC_USABLE)) + return; + + printk(KERN_INFO "I/O APIC #%d Version %d at 0x%lX.\n", + m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr); + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n", + MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!.\n"); + } + if (!m->mpc_apicaddr) { + printk(KERN_ERR "WARNING: bogus zero I/O APIC address" + " found in MP table, skipping!\n"); + return; + } + mp_ioapics[nr_ioapics] = *m; + nr_ioapics++; +} + +static void __init MP_intsrc_info (struct mpc_config_intsrc *m) +{ + mp_irqs [mp_irq_entries] = *m; + Dprintk("Int: type %d, pol %d, trig %d, bus %d," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, + m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + +static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m) +{ + Dprintk("Lint: type %d, pol %d, trig %d, bus %d," + " IRQ %02x, APIC ID %x, APIC LINT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid, + m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); +} + +#ifdef CONFIG_X86_NUMAQ +static void __init MP_translation_info (struct mpc_config_translation *m) +{ + printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local); + + if (mpc_record >= MAX_MPC_ENTRY) + printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n"); + else + translation_table[mpc_record] = m; /* stash this for later */ + if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad)) + node_set_online(m->trans_quad); +} + +/* + * Read/parse the MPC oem tables + */ + +static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \ + unsigned short oemsize) +{ + int count = sizeof (*oemtable); /* the header size */ + unsigned char *oemptr = ((unsigned char *)oemtable)+count; + + mpc_record = 0; + printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable); + if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4)) + { + printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n", + oemtable->oem_signature[0], + oemtable->oem_signature[1], + oemtable->oem_signature[2], + oemtable->oem_signature[3]); + return; + } + if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length)) + { + printk(KERN_WARNING "SMP oem mptable: checksum error!\n"); + return; + } + while (count < oemtable->oem_length) { + switch (*oemptr) { + case MP_TRANSLATION: + { + struct mpc_config_translation *m= + (struct mpc_config_translation *)oemptr; + MP_translation_info(m); + oemptr += sizeof(*m); + count += sizeof(*m); + ++mpc_record; + break; + } + default: + { + printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr); + return; + } + } + } +} + +static inline void mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid) +{ + if (strncmp(oem, "IBM NUMA", 8)) + printk("Warning! May not be a NUMA-Q system!\n"); + if (mpc->mpc_oemptr) + smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr, + mpc->mpc_oemsize); +} +#endif /* CONFIG_X86_NUMAQ */ + +/* + * Read/parse the MPC + */ + +static int __init smp_read_mpc(struct mp_config_table *mpc) +{ + char str[16]; + char oem[10]; + int count=sizeof(*mpc); + unsigned char *mpt=((unsigned char *)mpc)+count; + + if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) { + printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n", + *(u32 *)mpc->mpc_signature); + return 0; + } + if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) { + printk(KERN_ERR "SMP mptable: checksum error!\n"); + return 0; + } + if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) { + printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n", + mpc->mpc_spec); + return 0; + } + if (!mpc->mpc_lapic) { + printk(KERN_ERR "SMP mptable: null local APIC address!\n"); + return 0; + } + memcpy(oem,mpc->mpc_oem,8); + oem[8]=0; + printk(KERN_INFO "OEM ID: %s ",oem); + + memcpy(str,mpc->mpc_productid,12); + str[12]=0; + printk("Product ID: %s ",str); + + mps_oem_check(mpc, oem, str); + + printk("APIC at: 0x%lX\n",mpc->mpc_lapic); + + /* + * Save the local APIC address (it might be non-default) -- but only + * if we're not using ACPI. + */ + if (!acpi_lapic) + mp_lapic_addr = mpc->mpc_lapic; + + /* + * Now process the configuration blocks. + */ + mpc_record = 0; + while (count < mpc->mpc_length) { + switch(*mpt) { + case MP_PROCESSOR: + { + struct mpc_config_processor *m= + (struct mpc_config_processor *)mpt; + /* ACPI may have already provided this data */ + if (!acpi_lapic) + MP_processor_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_BUS: + { + struct mpc_config_bus *m= + (struct mpc_config_bus *)mpt; + MP_bus_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_IOAPIC: + { + struct mpc_config_ioapic *m= + (struct mpc_config_ioapic *)mpt; + MP_ioapic_info(m); + mpt+=sizeof(*m); + count+=sizeof(*m); + break; + } + case MP_INTSRC: + { + struct mpc_config_intsrc *m= + (struct mpc_config_intsrc *)mpt; + + MP_intsrc_info(m); + mpt+=sizeof(*m); + count+=sizeof(*m); + break; + } + case MP_LINTSRC: + { + struct mpc_config_lintsrc *m= + (struct mpc_config_lintsrc *)mpt; + MP_lintsrc_info(m); + mpt+=sizeof(*m); + count+=sizeof(*m); + break; + } + default: + { + count = mpc->mpc_length; + break; + } + } + ++mpc_record; + } + setup_apic_routing(); + if (!num_processors) + printk(KERN_ERR "SMP mptable: no processors registered!\n"); + return num_processors; +} + +static int __init ELCR_trigger(unsigned int irq) +{ + unsigned int port; + + port = 0x4d0 + (irq >> 3); + return (inb(port) >> (irq & 7)) & 1; +} + +static void __init construct_default_ioirq_mptable(int mpc_default_type) +{ + struct mpc_config_intsrc intsrc; + int i; + int ELCR_fallback = 0; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqflag = 0; /* conforming */ + intsrc.mpc_srcbus = 0; + intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; + + intsrc.mpc_irqtype = mp_INT; + + /* + * If true, we have an ISA/PCI system with no IRQ entries + * in the MP table. To prevent the PCI interrupts from being set up + * incorrectly, we try to use the ELCR. The sanity check to see if + * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can + * never be level sensitive, so we simply see if the ELCR agrees. + * If it does, we assume it's valid. + */ + if (mpc_default_type == 5) { + printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n"); + + if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13)) + printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n"); + else { + printk(KERN_INFO "Using ELCR to identify PCI interrupts\n"); + ELCR_fallback = 1; + } + } + + for (i = 0; i < 16; i++) { + switch (mpc_default_type) { + case 2: + if (i == 0 || i == 13) + continue; /* IRQ0 & IRQ13 not connected */ + /* fall through */ + default: + if (i == 2) + continue; /* IRQ2 is never connected */ + } + + if (ELCR_fallback) { + /* + * If the ELCR indicates a level-sensitive interrupt, we + * copy that information over to the MP table in the + * irqflag field (level sensitive, active high polarity). + */ + if (ELCR_trigger(i)) + intsrc.mpc_irqflag = 13; + else + intsrc.mpc_irqflag = 0; + } + + intsrc.mpc_srcbusirq = i; + intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ + MP_intsrc_info(&intsrc); + } + + intsrc.mpc_irqtype = mp_ExtINT; + intsrc.mpc_srcbusirq = 0; + intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */ + MP_intsrc_info(&intsrc); +} + +static inline void __init construct_default_ISA_mptable(int mpc_default_type) +{ + struct mpc_config_processor processor; + struct mpc_config_bus bus; + struct mpc_config_ioapic ioapic; + struct mpc_config_lintsrc lintsrc; + int linttypes[2] = { mp_ExtINT, mp_NMI }; + int i; + + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* + * 2 CPUs, numbered 0 & 1. + */ + processor.mpc_type = MP_PROCESSOR; + /* Either an integrated APIC or a discrete 82489DX. */ + processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + processor.mpc_cpuflag = CPU_ENABLED; + processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | + (boot_cpu_data.x86_model << 4) | + boot_cpu_data.x86_mask; + processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + for (i = 0; i < 2; i++) { + processor.mpc_apicid = i; + MP_processor_info(&processor); + } + + bus.mpc_type = MP_BUS; + bus.mpc_busid = 0; + switch (mpc_default_type) { + default: + printk("???\n"); + printk(KERN_ERR "Unknown standard configuration %d\n", + mpc_default_type); + /* fall through */ + case 1: + case 5: + memcpy(bus.mpc_bustype, "ISA ", 6); + break; + case 2: + case 6: + case 3: + memcpy(bus.mpc_bustype, "EISA ", 6); + break; + case 4: + case 7: + memcpy(bus.mpc_bustype, "MCA ", 6); + } + MP_bus_info(&bus); + if (mpc_default_type > 4) { + bus.mpc_busid = 1; + memcpy(bus.mpc_bustype, "PCI ", 6); + MP_bus_info(&bus); + } + + ioapic.mpc_type = MP_IOAPIC; + ioapic.mpc_apicid = 2; + ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + ioapic.mpc_flags = MPC_APIC_USABLE; + ioapic.mpc_apicaddr = 0xFEC00000; + MP_ioapic_info(&ioapic); + + /* + * We set up most of the low 16 IO-APIC pins according to MPS rules. + */ + construct_default_ioirq_mptable(mpc_default_type); + + lintsrc.mpc_type = MP_LINTSRC; + lintsrc.mpc_irqflag = 0; /* conforming */ + lintsrc.mpc_srcbusid = 0; + lintsrc.mpc_srcbusirq = 0; + lintsrc.mpc_destapic = MP_APIC_ALL; + for (i = 0; i < 2; i++) { + lintsrc.mpc_irqtype = linttypes[i]; + lintsrc.mpc_destapiclint = i; + MP_lintsrc_info(&lintsrc); + } +} + +static struct intel_mp_floating *mpf_found; + +/* + * Scan the memory blocks for an SMP configuration block. + */ +void __init get_smp_config (void) +{ + struct intel_mp_floating *mpf = mpf_found; + + /* + * ACPI supports both logical (e.g. Hyper-Threading) and physical + * processors, where MPS only supports physical. + */ + if (acpi_lapic && acpi_ioapic) { + printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n"); + return; + } + else if (acpi_lapic) + printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n"); + + printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); + if (mpf->mpf_feature2 & (1<<7)) { + printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); + pic_mode = 1; + } else { + printk(KERN_INFO " Virtual Wire compatibility mode.\n"); + pic_mode = 0; + } + + /* + * Now see if we need to read further. + */ + if (mpf->mpf_feature1 != 0) { + + printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1); + construct_default_ISA_mptable(mpf->mpf_feature1); + + } else if (mpf->mpf_physptr) { + + /* + * Read the physical hardware table. Anything here will + * override the defaults. + */ + if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) { + smp_found_config = 0; + printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); + printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); + return; + } + /* + * If there are no explicit MP IRQ entries, then we are + * broken. We set up most of the low 16 IO-APIC pins to + * ISA defaults and hope it will work. + */ + if (!mp_irq_entries) { + struct mpc_config_bus bus; + + printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n"); + + bus.mpc_type = MP_BUS; + bus.mpc_busid = 0; + memcpy(bus.mpc_bustype, "ISA ", 6); + MP_bus_info(&bus); + + construct_default_ioirq_mptable(0); + } + + } else + BUG(); + + printk(KERN_INFO "Processors: %d\n", num_processors); + /* + * Only use the first configuration found. + */ +} + +static int __init smp_scan_config (unsigned long base, unsigned long length) +{ + unsigned long *bp = phys_to_virt(base); + struct intel_mp_floating *mpf; + + Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length); + if (sizeof(*mpf) != 16) + printk("Error: MPF size\n"); + + while (length > 0) { + mpf = (struct intel_mp_floating *)bp; + if ((*bp == SMP_MAGIC_IDENT) && + (mpf->mpf_length == 1) && + !mpf_checksum((unsigned char *)bp, 16) && + ((mpf->mpf_specification == 1) + || (mpf->mpf_specification == 4)) ) { + + smp_found_config = 1; + printk(KERN_INFO "found SMP MP-table at %08lx\n", + virt_to_phys(mpf)); + reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE); + if (mpf->mpf_physptr) { + /* + * We cannot access to MPC table to compute + * table size yet, as only few megabytes from + * the bottom is mapped now. + * PC-9800's MPC table places on the very last + * of physical memory; so that simply reserving + * PAGE_SIZE from mpg->mpf_physptr yields BUG() + * in reserve_bootmem. + */ + unsigned long size = PAGE_SIZE; + unsigned long end = max_low_pfn * PAGE_SIZE; + if (mpf->mpf_physptr + size > end) + size = end - mpf->mpf_physptr; + reserve_bootmem(mpf->mpf_physptr, size); + } + + mpf_found = mpf; + return 1; + } + bp += 4; + length -= 16; + } + return 0; +} + +void __init find_smp_config (void) +{ + unsigned int address; + + /* + * FIXME: Linux assumes you have 640K of base ram.. + * this continues the error... + * + * 1) Scan the bottom 1K for a signature + * 2) Scan the top 1K of base RAM + * 3) Scan the 64K of bios + */ + if (smp_scan_config(0x0,0x400) || + smp_scan_config(639*0x400,0x400) || + smp_scan_config(0xF0000,0x10000)) + return; + /* + * If it is an SMP machine we should know now, unless the + * configuration is in an EISA/MCA bus machine with an + * extended bios data area. + * + * there is a real-mode segmented pointer pointing to the + * 4K EBDA area at 0x40E, calculate and scan it here. + * + * NOTE! There are Linux loaders that will corrupt the EBDA + * area, and as such this kind of SMP config may be less + * trustworthy, simply because the SMP table may have been + * stomped on during early boot. These loaders are buggy and + * should be fixed. + * + * MP1.4 SPEC states to only scan first 1K of 4K EBDA. + */ + + address = get_bios_ebda(); + if (address) + smp_scan_config(address, 0x400); +} + +int es7000_plat; + +/* -------------------------------------------------------------------------- + ACPI-based MP Configuration + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI + +void __init mp_register_lapic_address(u64 address) +{ + mp_lapic_addr = (unsigned long) address; + + set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); + + if (boot_cpu_physical_apicid == -1U) + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); + + Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid); +} + +void __cpuinit mp_register_lapic (u8 id, u8 enabled) +{ + struct mpc_config_processor processor; + int boot_cpu = 0; + + if (MAX_APICS - id <= 0) { + printk(KERN_WARNING "Processor #%d invalid (max %d)\n", + id, MAX_APICS); + return; + } + + if (id == boot_cpu_physical_apicid) + boot_cpu = 1; + + processor.mpc_type = MP_PROCESSOR; + processor.mpc_apicid = id; + processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR)); + processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); + processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); + processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | + (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; + processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + + MP_processor_info(&processor); +} + +#ifdef CONFIG_X86_IO_APIC + +#define MP_ISA_BUS 0 +#define MP_MAX_IOAPIC_PIN 127 + +static struct mp_ioapic_routing { + int apic_id; + int gsi_base; + int gsi_end; + u32 pin_programmed[4]; +} mp_ioapic_routing[MAX_IO_APICS]; + +static int mp_find_ioapic (int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_ioapic_routing[i].gsi_base) + && (gsi <= mp_ioapic_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + + return -1; +} + +void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) +{ + int idx = 0; + int tmpid; + + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in MADT table, skipping!\n"); + return; + } + + idx = nr_ioapics++; + + mp_ioapics[idx].mpc_type = MP_IOAPIC; + mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mpc_apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) + && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + tmpid = io_apic_get_unique_id(idx, id); + else + tmpid = id; + if (tmpid == -1) { + nr_ioapics--; + return; + } + mp_ioapics[idx].mpc_apicid = tmpid; + mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); + + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].gsi_base = gsi_base; + mp_ioapic_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, + mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + mp_ioapic_routing[idx].gsi_base, + mp_ioapic_routing[idx].gsi_end); +} + +void __init +mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) +{ + struct mpc_config_intsrc intsrc; + int ioapic = -1; + int pin = -1; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_irqflag = (trigger << 2) | polarity; + intsrc.mpc_srcbus = MP_ISA_BUS; + intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ + intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + intsrc.mpc_dstirq = pin; /* INTIN# */ + + Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", + intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, + (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, + intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq); + + mp_irqs[mp_irq_entries] = intsrc; + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!\n"); +} + +void __init mp_config_acpi_legacy_irqs (void) +{ + struct mpc_config_intsrc intsrc; + int i = 0; + int ioapic = -1; + + /* + * Fabricate the legacy ISA bus (bus #31). + */ + mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; + Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); + + /* + * Older generations of ES7000 have no legacy identity mappings + */ + if (es7000_plat == 1) + return; + + /* + * Locate the IOAPIC that manages the ISA IRQs (0-15). + */ + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + return; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqflag = 0; /* Conforming */ + intsrc.mpc_srcbus = MP_ISA_BUS; + intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; + + /* + * Use the default configuration for the IRQs 0-15. Unless + * overriden by (MADT) interrupt source override entries. + */ + for (i = 0; i < 16; i++) { + int idx; + + for (idx = 0; idx < mp_irq_entries; idx++) { + struct mpc_config_intsrc *irq = mp_irqs + idx; + + /* Do we already have a mapping for this ISA IRQ? */ + if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i) + break; + + /* Do we already have a mapping for this IOAPIC pin */ + if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && + (irq->mpc_dstirq == i)) + break; + } + + if (idx != mp_irq_entries) { + printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); + continue; /* IRQ already used */ + } + + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_srcbusirq = i; /* Identity mapped */ + intsrc.mpc_dstirq = i; + + Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, " + "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, + (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, + intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, + intsrc.mpc_dstirq); + + mp_irqs[mp_irq_entries] = intsrc; + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!\n"); + } +} + +#define MAX_GSI_NUM 4096 + +int mp_register_gsi(u32 gsi, int triggering, int polarity) +{ + int ioapic = -1; + int ioapic_pin = 0; + int idx, bit = 0; + static int pci_irq = 16; + /* + * Mapping between Global System Interrups, which + * represent all possible interrupts, and IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + + if (ioapic_renumber_irq) + gsi = ioapic_renumber_irq(ioapic, gsi); + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + bit = ioapic_pin % 32; + idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32); + if (idx > 3) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + ioapic_pin); + return gsi; + } + if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) { + Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", + mp_ioapic_routing[ioapic].apic_id, ioapic_pin); + return gsi_to_irq[gsi]; + } + + mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit); + + if (triggering == ACPI_LEVEL_SENSITIVE) { + /* + * For PCI devices assign IRQs in order, avoiding gaps + * due to unused I/O APIC pins. + */ + int irq = gsi; + if (gsi < MAX_GSI_NUM) { + /* + * Retain the VIA chipset work-around (gsi > 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0)) + gsi = pci_irq++; + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_gbl_FADT.sci_interrupt) + gsi = pci_irq++; + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } + + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; +} + +#endif /* CONFIG_X86_IO_APIC */ +#endif /* CONFIG_ACPI */ diff --git a/arch/x86/kernel/mpparse_64.c b/arch/x86/kernel/mpparse_64.c new file mode 100644 index 000000000000..8bf0ca03ac8e --- /dev/null +++ b/arch/x86/kernel/mpparse_64.c @@ -0,0 +1,852 @@ +/* + * Intel Multiprocessor Specification 1.1 and 1.4 + * compliant MP-table parsing routines. + * + * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> + * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> + * + * Fixes + * Erich Boleyn : MP v1.4 and additional changes. + * Alan Cox : Added EBDA scanning + * Ingo Molnar : various cleanups and rewrites + * Maciej W. Rozycki: Bits for default MP configurations + * Paul Diefenbaugh: Added full ACPI support + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/kernel_stat.h> +#include <linux/mc146818rtc.h> +#include <linux/acpi.h> +#include <linux/module.h> + +#include <asm/smp.h> +#include <asm/mtrr.h> +#include <asm/mpspec.h> +#include <asm/pgalloc.h> +#include <asm/io_apic.h> +#include <asm/proto.h> +#include <asm/acpi.h> + +/* Have we found an MP table */ +int smp_found_config; + +/* + * Various Linux-internal data structures created from the + * MP-table. + */ +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); +int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; + +static int mp_current_pci_id = 0; +/* I/O APIC entries */ +struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; + +/* # of MP IRQ source entries */ +struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; + +/* MP IRQ source entries */ +int mp_irq_entries; + +int nr_ioapics; +unsigned long mp_lapic_addr = 0; + + + +/* Processor that is doing the boot up */ +unsigned int boot_cpu_id = -1U; +/* Internal processor count */ +unsigned int num_processors __cpuinitdata = 0; + +unsigned disabled_cpus __cpuinitdata; + +/* Bitmask of physically existing CPUs */ +physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; + +u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; + + +/* + * Intel MP BIOS table parsing routines: + */ + +/* + * Checksum an MP configuration block. + */ + +static int __init mpf_checksum(unsigned char *mp, int len) +{ + int sum = 0; + + while (len--) + sum += *mp++; + + return sum & 0xFF; +} + +static void __cpuinit MP_processor_info (struct mpc_config_processor *m) +{ + int cpu; + cpumask_t tmp_map; + char *bootup_cpu = ""; + + if (!(m->mpc_cpuflag & CPU_ENABLED)) { + disabled_cpus++; + return; + } + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { + bootup_cpu = " (Bootup-CPU)"; + boot_cpu_id = m->mpc_apicid; + } + + printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu); + + if (num_processors >= NR_CPUS) { + printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." + " Processor ignored.\n", NR_CPUS); + return; + } + + num_processors++; + cpus_complement(tmp_map, cpu_present_map); + cpu = first_cpu(tmp_map); + + physid_set(m->mpc_apicid, phys_cpu_present_map); + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { + /* + * bios_cpu_apicid is required to have processors listed + * in same order as logical cpu numbers. Hence the first + * entry is BSP, and so on. + */ + cpu = 0; + } + bios_cpu_apicid[cpu] = m->mpc_apicid; + x86_cpu_to_apicid[cpu] = m->mpc_apicid; + + cpu_set(cpu, cpu_possible_map); + cpu_set(cpu, cpu_present_map); +} + +static void __init MP_bus_info (struct mpc_config_bus *m) +{ + char str[7]; + + memcpy(str, m->mpc_bustype, 6); + str[6] = 0; + Dprintk("Bus #%d is %s\n", m->mpc_busid, str); + + if (strncmp(str, "ISA", 3) == 0) { + set_bit(m->mpc_busid, mp_bus_not_pci); + } else if (strncmp(str, "PCI", 3) == 0) { + clear_bit(m->mpc_busid, mp_bus_not_pci); + mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; + mp_current_pci_id++; + } else { + printk(KERN_ERR "Unknown bustype %s\n", str); + } +} + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +static void __init MP_ioapic_info (struct mpc_config_ioapic *m) +{ + if (!(m->mpc_flags & MPC_APIC_USABLE)) + return; + + printk("I/O APIC #%d at 0x%X.\n", + m->mpc_apicid, m->mpc_apicaddr); + + if (bad_ioapic(m->mpc_apicaddr)) + return; + + mp_ioapics[nr_ioapics] = *m; + nr_ioapics++; +} + +static void __init MP_intsrc_info (struct mpc_config_intsrc *m) +{ + mp_irqs [mp_irq_entries] = *m; + Dprintk("Int: type %d, pol %d, trig %d, bus %d," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, + m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); + if (++mp_irq_entries >= MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + +static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m) +{ + Dprintk("Lint: type %d, pol %d, trig %d, bus %d," + " IRQ %02x, APIC ID %x, APIC LINT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid, + m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); +} + +/* + * Read/parse the MPC + */ + +static int __init smp_read_mpc(struct mp_config_table *mpc) +{ + char str[16]; + int count=sizeof(*mpc); + unsigned char *mpt=((unsigned char *)mpc)+count; + + if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) { + printk("MPTABLE: bad signature [%c%c%c%c]!\n", + mpc->mpc_signature[0], + mpc->mpc_signature[1], + mpc->mpc_signature[2], + mpc->mpc_signature[3]); + return 0; + } + if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) { + printk("MPTABLE: checksum error!\n"); + return 0; + } + if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) { + printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n", + mpc->mpc_spec); + return 0; + } + if (!mpc->mpc_lapic) { + printk(KERN_ERR "MPTABLE: null local APIC address!\n"); + return 0; + } + memcpy(str,mpc->mpc_oem,8); + str[8] = 0; + printk(KERN_INFO "MPTABLE: OEM ID: %s ",str); + + memcpy(str,mpc->mpc_productid,12); + str[12] = 0; + printk("MPTABLE: Product ID: %s ",str); + + printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic); + + /* save the local APIC address, it might be non-default */ + if (!acpi_lapic) + mp_lapic_addr = mpc->mpc_lapic; + + /* + * Now process the configuration blocks. + */ + while (count < mpc->mpc_length) { + switch(*mpt) { + case MP_PROCESSOR: + { + struct mpc_config_processor *m= + (struct mpc_config_processor *)mpt; + if (!acpi_lapic) + MP_processor_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_BUS: + { + struct mpc_config_bus *m= + (struct mpc_config_bus *)mpt; + MP_bus_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_IOAPIC: + { + struct mpc_config_ioapic *m= + (struct mpc_config_ioapic *)mpt; + MP_ioapic_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_INTSRC: + { + struct mpc_config_intsrc *m= + (struct mpc_config_intsrc *)mpt; + + MP_intsrc_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_LINTSRC: + { + struct mpc_config_lintsrc *m= + (struct mpc_config_lintsrc *)mpt; + MP_lintsrc_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + } + } + setup_apic_routing(); + if (!num_processors) + printk(KERN_ERR "MPTABLE: no processors registered!\n"); + return num_processors; +} + +static int __init ELCR_trigger(unsigned int irq) +{ + unsigned int port; + + port = 0x4d0 + (irq >> 3); + return (inb(port) >> (irq & 7)) & 1; +} + +static void __init construct_default_ioirq_mptable(int mpc_default_type) +{ + struct mpc_config_intsrc intsrc; + int i; + int ELCR_fallback = 0; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqflag = 0; /* conforming */ + intsrc.mpc_srcbus = 0; + intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; + + intsrc.mpc_irqtype = mp_INT; + + /* + * If true, we have an ISA/PCI system with no IRQ entries + * in the MP table. To prevent the PCI interrupts from being set up + * incorrectly, we try to use the ELCR. The sanity check to see if + * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can + * never be level sensitive, so we simply see if the ELCR agrees. + * If it does, we assume it's valid. + */ + if (mpc_default_type == 5) { + printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n"); + + if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13)) + printk(KERN_ERR "ELCR contains invalid data... not using ELCR\n"); + else { + printk(KERN_INFO "Using ELCR to identify PCI interrupts\n"); + ELCR_fallback = 1; + } + } + + for (i = 0; i < 16; i++) { + switch (mpc_default_type) { + case 2: + if (i == 0 || i == 13) + continue; /* IRQ0 & IRQ13 not connected */ + /* fall through */ + default: + if (i == 2) + continue; /* IRQ2 is never connected */ + } + + if (ELCR_fallback) { + /* + * If the ELCR indicates a level-sensitive interrupt, we + * copy that information over to the MP table in the + * irqflag field (level sensitive, active high polarity). + */ + if (ELCR_trigger(i)) + intsrc.mpc_irqflag = 13; + else + intsrc.mpc_irqflag = 0; + } + + intsrc.mpc_srcbusirq = i; + intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ + MP_intsrc_info(&intsrc); + } + + intsrc.mpc_irqtype = mp_ExtINT; + intsrc.mpc_srcbusirq = 0; + intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */ + MP_intsrc_info(&intsrc); +} + +static inline void __init construct_default_ISA_mptable(int mpc_default_type) +{ + struct mpc_config_processor processor; + struct mpc_config_bus bus; + struct mpc_config_ioapic ioapic; + struct mpc_config_lintsrc lintsrc; + int linttypes[2] = { mp_ExtINT, mp_NMI }; + int i; + + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* + * 2 CPUs, numbered 0 & 1. + */ + processor.mpc_type = MP_PROCESSOR; + processor.mpc_apicver = 0; + processor.mpc_cpuflag = CPU_ENABLED; + processor.mpc_cpufeature = 0; + processor.mpc_featureflag = 0; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + for (i = 0; i < 2; i++) { + processor.mpc_apicid = i; + MP_processor_info(&processor); + } + + bus.mpc_type = MP_BUS; + bus.mpc_busid = 0; + switch (mpc_default_type) { + default: + printk(KERN_ERR "???\nUnknown standard configuration %d\n", + mpc_default_type); + /* fall through */ + case 1: + case 5: + memcpy(bus.mpc_bustype, "ISA ", 6); + break; + } + MP_bus_info(&bus); + if (mpc_default_type > 4) { + bus.mpc_busid = 1; + memcpy(bus.mpc_bustype, "PCI ", 6); + MP_bus_info(&bus); + } + + ioapic.mpc_type = MP_IOAPIC; + ioapic.mpc_apicid = 2; + ioapic.mpc_apicver = 0; + ioapic.mpc_flags = MPC_APIC_USABLE; + ioapic.mpc_apicaddr = 0xFEC00000; + MP_ioapic_info(&ioapic); + + /* + * We set up most of the low 16 IO-APIC pins according to MPS rules. + */ + construct_default_ioirq_mptable(mpc_default_type); + + lintsrc.mpc_type = MP_LINTSRC; + lintsrc.mpc_irqflag = 0; /* conforming */ + lintsrc.mpc_srcbusid = 0; + lintsrc.mpc_srcbusirq = 0; + lintsrc.mpc_destapic = MP_APIC_ALL; + for (i = 0; i < 2; i++) { + lintsrc.mpc_irqtype = linttypes[i]; + lintsrc.mpc_destapiclint = i; + MP_lintsrc_info(&lintsrc); + } +} + +static struct intel_mp_floating *mpf_found; + +/* + * Scan the memory blocks for an SMP configuration block. + */ +void __init get_smp_config (void) +{ + struct intel_mp_floating *mpf = mpf_found; + + /* + * ACPI supports both logical (e.g. Hyper-Threading) and physical + * processors, where MPS only supports physical. + */ + if (acpi_lapic && acpi_ioapic) { + printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n"); + return; + } + else if (acpi_lapic) + printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n"); + + printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); + + /* + * Now see if we need to read further. + */ + if (mpf->mpf_feature1 != 0) { + + printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1); + construct_default_ISA_mptable(mpf->mpf_feature1); + + } else if (mpf->mpf_physptr) { + + /* + * Read the physical hardware table. Anything here will + * override the defaults. + */ + if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) { + smp_found_config = 0; + printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); + printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); + return; + } + /* + * If there are no explicit MP IRQ entries, then we are + * broken. We set up most of the low 16 IO-APIC pins to + * ISA defaults and hope it will work. + */ + if (!mp_irq_entries) { + struct mpc_config_bus bus; + + printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n"); + + bus.mpc_type = MP_BUS; + bus.mpc_busid = 0; + memcpy(bus.mpc_bustype, "ISA ", 6); + MP_bus_info(&bus); + + construct_default_ioirq_mptable(0); + } + + } else + BUG(); + + printk(KERN_INFO "Processors: %d\n", num_processors); + /* + * Only use the first configuration found. + */ +} + +static int __init smp_scan_config (unsigned long base, unsigned long length) +{ + extern void __bad_mpf_size(void); + unsigned int *bp = phys_to_virt(base); + struct intel_mp_floating *mpf; + + Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length); + if (sizeof(*mpf) != 16) + __bad_mpf_size(); + + while (length > 0) { + mpf = (struct intel_mp_floating *)bp; + if ((*bp == SMP_MAGIC_IDENT) && + (mpf->mpf_length == 1) && + !mpf_checksum((unsigned char *)bp, 16) && + ((mpf->mpf_specification == 1) + || (mpf->mpf_specification == 4)) ) { + + smp_found_config = 1; + reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE); + if (mpf->mpf_physptr) + reserve_bootmem_generic(mpf->mpf_physptr, PAGE_SIZE); + mpf_found = mpf; + return 1; + } + bp += 4; + length -= 16; + } + return 0; +} + +void __init find_smp_config(void) +{ + unsigned int address; + + /* + * FIXME: Linux assumes you have 640K of base ram.. + * this continues the error... + * + * 1) Scan the bottom 1K for a signature + * 2) Scan the top 1K of base RAM + * 3) Scan the 64K of bios + */ + if (smp_scan_config(0x0,0x400) || + smp_scan_config(639*0x400,0x400) || + smp_scan_config(0xF0000,0x10000)) + return; + /* + * If it is an SMP machine we should know now. + * + * there is a real-mode segmented pointer pointing to the + * 4K EBDA area at 0x40E, calculate and scan it here. + * + * NOTE! There are Linux loaders that will corrupt the EBDA + * area, and as such this kind of SMP config may be less + * trustworthy, simply because the SMP table may have been + * stomped on during early boot. These loaders are buggy and + * should be fixed. + */ + + address = *(unsigned short *)phys_to_virt(0x40E); + address <<= 4; + if (smp_scan_config(address, 0x1000)) + return; + + /* If we have come this far, we did not find an MP table */ + printk(KERN_INFO "No mptable found.\n"); +} + +/* -------------------------------------------------------------------------- + ACPI-based MP Configuration + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI + +void __init mp_register_lapic_address(u64 address) +{ + mp_lapic_addr = (unsigned long) address; + set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); + if (boot_cpu_id == -1U) + boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); +} + +void __cpuinit mp_register_lapic (u8 id, u8 enabled) +{ + struct mpc_config_processor processor; + int boot_cpu = 0; + + if (id == boot_cpu_id) + boot_cpu = 1; + + processor.mpc_type = MP_PROCESSOR; + processor.mpc_apicid = id; + processor.mpc_apicver = 0; + processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); + processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); + processor.mpc_cpufeature = 0; + processor.mpc_featureflag = 0; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + + MP_processor_info(&processor); +} + +#define MP_ISA_BUS 0 +#define MP_MAX_IOAPIC_PIN 127 + +static struct mp_ioapic_routing { + int apic_id; + int gsi_start; + int gsi_end; + u32 pin_programmed[4]; +} mp_ioapic_routing[MAX_IO_APICS]; + +static int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_ioapic_routing[i].gsi_start) + && (gsi <= mp_ioapic_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +static u8 uniq_ioapic_id(u8 id) +{ + int i; + DECLARE_BITMAP(used, 256); + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mpc_apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +} + +void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].mpc_type = MP_IOAPIC; + mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mpc_apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); + mp_ioapics[idx].mpc_apicver = 0; + + /* + * Build basic IRQ lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI IRQs). + */ + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].gsi_start = gsi_base; + mp_ioapic_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, + mp_ioapics[idx].mpc_apicaddr, + mp_ioapic_routing[idx].gsi_start, + mp_ioapic_routing[idx].gsi_end); + + nr_ioapics++; +} + +void __init +mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) +{ + struct mpc_config_intsrc intsrc; + int ioapic = -1; + int pin = -1; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = gsi - mp_ioapic_routing[ioapic].gsi_start; + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_irqflag = (trigger << 2) | polarity; + intsrc.mpc_srcbus = MP_ISA_BUS; + intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ + intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + intsrc.mpc_dstirq = pin; /* INTIN# */ + + Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", + intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, + (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, + intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq); + + mp_irqs[mp_irq_entries] = intsrc; + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!\n"); +} + +void __init mp_config_acpi_legacy_irqs(void) +{ + struct mpc_config_intsrc intsrc; + int i = 0; + int ioapic = -1; + + /* + * Fabricate the legacy ISA bus (bus #31). + */ + set_bit(MP_ISA_BUS, mp_bus_not_pci); + + /* + * Locate the IOAPIC that manages the ISA IRQs (0-15). + */ + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + return; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqflag = 0; /* Conforming */ + intsrc.mpc_srcbus = MP_ISA_BUS; + intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; + + /* + * Use the default configuration for the IRQs 0-15. Unless + * overridden by (MADT) interrupt source override entries. + */ + for (i = 0; i < 16; i++) { + int idx; + + for (idx = 0; idx < mp_irq_entries; idx++) { + struct mpc_config_intsrc *irq = mp_irqs + idx; + + /* Do we already have a mapping for this ISA IRQ? */ + if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i) + break; + + /* Do we already have a mapping for this IOAPIC pin */ + if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && + (irq->mpc_dstirq == i)) + break; + } + + if (idx != mp_irq_entries) { + printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); + continue; /* IRQ already used */ + } + + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_srcbusirq = i; /* Identity mapped */ + intsrc.mpc_dstirq = i; + + Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, " + "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, + (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, + intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, + intsrc.mpc_dstirq); + + mp_irqs[mp_irq_entries] = intsrc; + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!\n"); + } +} + +int mp_register_gsi(u32 gsi, int triggering, int polarity) +{ + int ioapic = -1; + int ioapic_pin = 0; + int idx, bit = 0; + + if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) + return gsi; + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start; + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + bit = ioapic_pin % 32; + idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32); + if (idx > 3) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + ioapic_pin); + return gsi; + } + if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) { + Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", + mp_ioapic_routing[ioapic].apic_id, ioapic_pin); + return gsi; + } + + mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit); + + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; +} +#endif /*CONFIG_ACPI*/ diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c new file mode 100644 index 000000000000..0c1069b8d638 --- /dev/null +++ b/arch/x86/kernel/msr.c @@ -0,0 +1,224 @@ +/* ----------------------------------------------------------------------- * + * + * Copyright 2000 H. Peter Anvin - All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, + * USA; either version 2 of the License, or (at your option) any later + * version; incorporated herein by reference. + * + * ----------------------------------------------------------------------- */ + +/* + * msr.c + * + * x86 MSR access device + * + * This device is accessed by lseek() to the appropriate register number + * and then read/write in chunks of 8 bytes. A larger size means multiple + * reads or writes of the same register. + * + * This driver uses /dev/cpu/%d/msr where %d is the minor number, and on + * an SMP box will direct the access to CPU %d. + */ + +#include <linux/module.h> + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/fcntl.h> +#include <linux/init.h> +#include <linux/poll.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/major.h> +#include <linux/fs.h> +#include <linux/device.h> +#include <linux/cpu.h> +#include <linux/notifier.h> + +#include <asm/processor.h> +#include <asm/msr.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +static struct class *msr_class; + +static loff_t msr_seek(struct file *file, loff_t offset, int orig) +{ + loff_t ret = -EINVAL; + + lock_kernel(); + switch (orig) { + case 0: + file->f_pos = offset; + ret = file->f_pos; + break; + case 1: + file->f_pos += offset; + ret = file->f_pos; + } + unlock_kernel(); + return ret; +} + +static ssize_t msr_read(struct file *file, char __user * buf, + size_t count, loff_t * ppos) +{ + u32 __user *tmp = (u32 __user *) buf; + u32 data[2]; + u32 reg = *ppos; + int cpu = iminor(file->f_path.dentry->d_inode); + int err; + + if (count % 8) + return -EINVAL; /* Invalid chunk size */ + + for (; count; count -= 8) { + err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]); + if (err) + return -EIO; + if (copy_to_user(tmp, &data, 8)) + return -EFAULT; + tmp += 2; + } + + return ((char __user *)tmp) - buf; +} + +static ssize_t msr_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + const u32 __user *tmp = (const u32 __user *)buf; + u32 data[2]; + u32 reg = *ppos; + int cpu = iminor(file->f_path.dentry->d_inode); + int err; + + if (count % 8) + return -EINVAL; /* Invalid chunk size */ + + for (; count; count -= 8) { + if (copy_from_user(&data, tmp, 8)) + return -EFAULT; + err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]); + if (err) + return -EIO; + tmp += 2; + } + + return ((char __user *)tmp) - buf; +} + +static int msr_open(struct inode *inode, struct file *file) +{ + unsigned int cpu = iminor(file->f_path.dentry->d_inode); + struct cpuinfo_x86 *c = &(cpu_data)[cpu]; + + if (cpu >= NR_CPUS || !cpu_online(cpu)) + return -ENXIO; /* No such CPU */ + if (!cpu_has(c, X86_FEATURE_MSR)) + return -EIO; /* MSR not supported */ + + return 0; +} + +/* + * File operations we support + */ +static const struct file_operations msr_fops = { + .owner = THIS_MODULE, + .llseek = msr_seek, + .read = msr_read, + .write = msr_write, + .open = msr_open, +}; + +static int msr_device_create(int i) +{ + int err = 0; + struct device *dev; + + dev = device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), "msr%d",i); + if (IS_ERR(dev)) + err = PTR_ERR(dev); + return err; +} + +static int msr_class_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + msr_device_create(cpu); + break; + case CPU_DEAD: + case CPU_DEAD_FROZEN: + device_destroy(msr_class, MKDEV(MSR_MAJOR, cpu)); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata msr_class_cpu_notifier = +{ + .notifier_call = msr_class_cpu_callback, +}; + +static int __init msr_init(void) +{ + int i, err = 0; + i = 0; + + if (register_chrdev(MSR_MAJOR, "cpu/msr", &msr_fops)) { + printk(KERN_ERR "msr: unable to get major %d for msr\n", + MSR_MAJOR); + err = -EBUSY; + goto out; + } + msr_class = class_create(THIS_MODULE, "msr"); + if (IS_ERR(msr_class)) { + err = PTR_ERR(msr_class); + goto out_chrdev; + } + for_each_online_cpu(i) { + err = msr_device_create(i); + if (err != 0) + goto out_class; + } + register_hotcpu_notifier(&msr_class_cpu_notifier); + + err = 0; + goto out; + +out_class: + i = 0; + for_each_online_cpu(i) + device_destroy(msr_class, MKDEV(MSR_MAJOR, i)); + class_destroy(msr_class); +out_chrdev: + unregister_chrdev(MSR_MAJOR, "cpu/msr"); +out: + return err; +} + +static void __exit msr_exit(void) +{ + int cpu = 0; + for_each_online_cpu(cpu) + device_destroy(msr_class, MKDEV(MSR_MAJOR, cpu)); + class_destroy(msr_class); + unregister_chrdev(MSR_MAJOR, "cpu/msr"); + unregister_hotcpu_notifier(&msr_class_cpu_notifier); +} + +module_init(msr_init); +module_exit(msr_exit) + +MODULE_AUTHOR("H. Peter Anvin <hpa@zytor.com>"); +MODULE_DESCRIPTION("x86 generic MSR driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c new file mode 100644 index 000000000000..c7227e2180f8 --- /dev/null +++ b/arch/x86/kernel/nmi_32.c @@ -0,0 +1,468 @@ +/* + * linux/arch/i386/nmi.c + * + * NMI watchdog support on APIC systems + * + * Started by Ingo Molnar <mingo@redhat.com> + * + * Fixes: + * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. + * Mikael Pettersson : Power Management for local APIC NMI watchdog. + * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. + * Pavel Machek and + * Mikael Pettersson : PM converted to driver model. Disable/enable API. + */ + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/nmi.h> +#include <linux/sysdev.h> +#include <linux/sysctl.h> +#include <linux/percpu.h> +#include <linux/kprobes.h> +#include <linux/cpumask.h> +#include <linux/kernel_stat.h> +#include <linux/kdebug.h> + +#include <asm/smp.h> +#include <asm/nmi.h> + +#include "mach_traps.h" + +int unknown_nmi_panic; +int nmi_watchdog_enabled; + +static cpumask_t backtrace_mask = CPU_MASK_NONE; + +/* nmi_active: + * >0: the lapic NMI watchdog is active, but can be disabled + * <0: the lapic NMI watchdog has not been set up, and cannot + * be enabled + * 0: the lapic NMI watchdog is disabled, but can be enabled + */ +atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ + +unsigned int nmi_watchdog = NMI_DEFAULT; +static unsigned int nmi_hz = HZ; + +static DEFINE_PER_CPU(short, wd_enabled); + +/* local prototypes */ +static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); + +static int endflag __initdata = 0; + +#ifdef CONFIG_SMP +/* The performance counters used by NMI_LOCAL_APIC don't trigger when + * the CPU is idle. To make sure the NMI watchdog really ticks on all + * CPUs during the test make them busy. + */ +static __init void nmi_cpu_busy(void *data) +{ + local_irq_enable_in_hardirq(); + /* Intentionally don't use cpu_relax here. This is + to make sure that the performance counter really ticks, + even if there is a simulator or similar that catches the + pause instruction. On a real HT machine this is fine because + all other CPUs are busy with "useless" delay loops and don't + care if they get somewhat less cycles. */ + while (endflag == 0) + mb(); +} +#endif + +static int __init check_nmi_watchdog(void) +{ + unsigned int *prev_nmi_count; + int cpu; + + if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) + return 0; + + if (!atomic_read(&nmi_active)) + return 0; + + prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); + if (!prev_nmi_count) + return -1; + + printk(KERN_INFO "Testing NMI watchdog ... "); + + if (nmi_watchdog == NMI_LOCAL_APIC) + smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); + + for_each_possible_cpu(cpu) + prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count; + local_irq_enable(); + mdelay((20*1000)/nmi_hz); // wait 20 ticks + + for_each_possible_cpu(cpu) { +#ifdef CONFIG_SMP + /* Check cpu_callin_map here because that is set + after the timer is started. */ + if (!cpu_isset(cpu, cpu_callin_map)) + continue; +#endif + if (!per_cpu(wd_enabled, cpu)) + continue; + if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { + printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", + cpu, + prev_nmi_count[cpu], + nmi_count(cpu)); + per_cpu(wd_enabled, cpu) = 0; + atomic_dec(&nmi_active); + } + } + endflag = 1; + if (!atomic_read(&nmi_active)) { + kfree(prev_nmi_count); + atomic_set(&nmi_active, -1); + return -1; + } + printk("OK.\n"); + + /* now that we know it works we can reduce NMI frequency to + something more reasonable; makes a difference in some configs */ + if (nmi_watchdog == NMI_LOCAL_APIC) + nmi_hz = lapic_adjust_nmi_hz(1); + + kfree(prev_nmi_count); + return 0; +} +/* This needs to happen later in boot so counters are working */ +late_initcall(check_nmi_watchdog); + +static int __init setup_nmi_watchdog(char *str) +{ + int nmi; + + get_option(&str, &nmi); + + if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) + return 0; + + nmi_watchdog = nmi; + return 1; +} + +__setup("nmi_watchdog=", setup_nmi_watchdog); + + +/* Suspend/resume support */ + +#ifdef CONFIG_PM + +static int nmi_pm_active; /* nmi_active before suspend */ + +static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) +{ + /* only CPU0 goes here, other CPUs should be offline */ + nmi_pm_active = atomic_read(&nmi_active); + stop_apic_nmi_watchdog(NULL); + BUG_ON(atomic_read(&nmi_active) != 0); + return 0; +} + +static int lapic_nmi_resume(struct sys_device *dev) +{ + /* only CPU0 goes here, other CPUs should be offline */ + if (nmi_pm_active > 0) { + setup_apic_nmi_watchdog(NULL); + touch_nmi_watchdog(); + } + return 0; +} + + +static struct sysdev_class nmi_sysclass = { + set_kset_name("lapic_nmi"), + .resume = lapic_nmi_resume, + .suspend = lapic_nmi_suspend, +}; + +static struct sys_device device_lapic_nmi = { + .id = 0, + .cls = &nmi_sysclass, +}; + +static int __init init_lapic_nmi_sysfs(void) +{ + int error; + + /* should really be a BUG_ON but b/c this is an + * init call, it just doesn't work. -dcz + */ + if (nmi_watchdog != NMI_LOCAL_APIC) + return 0; + + if (atomic_read(&nmi_active) < 0) + return 0; + + error = sysdev_class_register(&nmi_sysclass); + if (!error) + error = sysdev_register(&device_lapic_nmi); + return error; +} +/* must come after the local APIC's device_initcall() */ +late_initcall(init_lapic_nmi_sysfs); + +#endif /* CONFIG_PM */ + +static void __acpi_nmi_enable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI); +} + +/* + * Enable timer based NMIs on all CPUs: + */ +void acpi_nmi_enable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); +} + +static void __acpi_nmi_disable(void *__unused) +{ + apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); +} + +/* + * Disable timer based NMIs on all CPUs: + */ +void acpi_nmi_disable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); +} + +void setup_apic_nmi_watchdog (void *unused) +{ + if (__get_cpu_var(wd_enabled)) + return; + + /* cheap hack to support suspend/resume */ + /* if cpu0 is not active neither should the other cpus */ + if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) + return; + + switch (nmi_watchdog) { + case NMI_LOCAL_APIC: + __get_cpu_var(wd_enabled) = 1; /* enable it before to avoid race with handler */ + if (lapic_watchdog_init(nmi_hz) < 0) { + __get_cpu_var(wd_enabled) = 0; + return; + } + /* FALL THROUGH */ + case NMI_IO_APIC: + __get_cpu_var(wd_enabled) = 1; + atomic_inc(&nmi_active); + } +} + +void stop_apic_nmi_watchdog(void *unused) +{ + /* only support LOCAL and IO APICs for now */ + if ((nmi_watchdog != NMI_LOCAL_APIC) && + (nmi_watchdog != NMI_IO_APIC)) + return; + if (__get_cpu_var(wd_enabled) == 0) + return; + if (nmi_watchdog == NMI_LOCAL_APIC) + lapic_watchdog_stop(); + __get_cpu_var(wd_enabled) = 0; + atomic_dec(&nmi_active); +} + +/* + * the best way to detect whether a CPU has a 'hard lockup' problem + * is to check it's local APIC timer IRQ counts. If they are not + * changing then that CPU has some problem. + * + * as these watchdog NMI IRQs are generated on every CPU, we only + * have to check the current processor. + * + * since NMIs don't listen to _any_ locks, we have to be extremely + * careful not to rely on unsafe variables. The printk might lock + * up though, so we have to break up any console locks first ... + * [when there will be more tty-related locks, break them up + * here too!] + */ + +static unsigned int + last_irq_sums [NR_CPUS], + alert_counter [NR_CPUS]; + +void touch_nmi_watchdog(void) +{ + if (nmi_watchdog > 0) { + unsigned cpu; + + /* + * Just reset the alert counters, (other CPUs might be + * spinning on locks we hold): + */ + for_each_present_cpu(cpu) { + if (alert_counter[cpu]) + alert_counter[cpu] = 0; + } + } + + /* + * Tickle the softlockup detector too: + */ + touch_softlockup_watchdog(); +} +EXPORT_SYMBOL(touch_nmi_watchdog); + +extern void die_nmi(struct pt_regs *, const char *msg); + +__kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) +{ + + /* + * Since current_thread_info()-> is always on the stack, and we + * always switch the stack NMI-atomically, it's safe to use + * smp_processor_id(). + */ + unsigned int sum; + int touched = 0; + int cpu = smp_processor_id(); + int rc=0; + + /* check for other users first */ + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) { + rc = 1; + touched = 1; + } + + if (cpu_isset(cpu, backtrace_mask)) { + static DEFINE_SPINLOCK(lock); /* Serialise the printks */ + + spin_lock(&lock); + printk("NMI backtrace for cpu %d\n", cpu); + dump_stack(); + spin_unlock(&lock); + cpu_clear(cpu, backtrace_mask); + } + + /* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ + sum = per_cpu(irq_stat, cpu).apic_timer_irqs + kstat_cpu(cpu).irqs[0]; + + /* if the none of the timers isn't firing, this cpu isn't doing much */ + if (!touched && last_irq_sums[cpu] == sum) { + /* + * Ayiee, looks like this CPU is stuck ... + * wait a few IRQs (5 seconds) before doing the oops ... + */ + alert_counter[cpu]++; + if (alert_counter[cpu] == 5*nmi_hz) + /* + * die_nmi will return ONLY if NOTIFY_STOP happens.. + */ + die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); + } else { + last_irq_sums[cpu] = sum; + alert_counter[cpu] = 0; + } + /* see if the nmi watchdog went off */ + if (!__get_cpu_var(wd_enabled)) + return rc; + switch (nmi_watchdog) { + case NMI_LOCAL_APIC: + rc |= lapic_wd_event(nmi_hz); + break; + case NMI_IO_APIC: + /* don't know how to accurately check for this. + * just assume it was a watchdog timer interrupt + * This matches the old behaviour. + */ + rc = 1; + break; + } + return rc; +} + +int do_nmi_callback(struct pt_regs * regs, int cpu) +{ +#ifdef CONFIG_SYSCTL + if (unknown_nmi_panic) + return unknown_nmi_panic_callback(regs, cpu); +#endif + return 0; +} + +#ifdef CONFIG_SYSCTL + +static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) +{ + unsigned char reason = get_nmi_reason(); + char buf[64]; + + sprintf(buf, "NMI received for unknown reason %02x\n", reason); + die_nmi(regs, buf); + return 0; +} + +/* + * proc handler for /proc/sys/kernel/nmi + */ +int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, + void __user *buffer, size_t *length, loff_t *ppos) +{ + int old_state; + + nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; + old_state = nmi_watchdog_enabled; + proc_dointvec(table, write, file, buffer, length, ppos); + if (!!old_state == !!nmi_watchdog_enabled) + return 0; + + if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { + printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); + return -EIO; + } + + if (nmi_watchdog == NMI_DEFAULT) { + if (lapic_watchdog_ok()) + nmi_watchdog = NMI_LOCAL_APIC; + else + nmi_watchdog = NMI_IO_APIC; + } + + if (nmi_watchdog == NMI_LOCAL_APIC) { + if (nmi_watchdog_enabled) + enable_lapic_nmi_watchdog(); + else + disable_lapic_nmi_watchdog(); + } else { + printk( KERN_WARNING + "NMI watchdog doesn't know what hardware to touch\n"); + return -EIO; + } + return 0; +} + +#endif + +void __trigger_all_cpu_backtrace(void) +{ + int i; + + backtrace_mask = cpu_online_map; + /* Wait for up to 10 seconds for all CPUs to do the backtrace */ + for (i = 0; i < 10 * 1000; i++) { + if (cpus_empty(backtrace_mask)) + break; + mdelay(1); + } +} + +EXPORT_SYMBOL(nmi_active); +EXPORT_SYMBOL(nmi_watchdog); diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c new file mode 100644 index 000000000000..0ec6d2ddb931 --- /dev/null +++ b/arch/x86/kernel/nmi_64.c @@ -0,0 +1,483 @@ +/* + * linux/arch/x86_64/nmi.c + * + * NMI watchdog support on APIC systems + * + * Started by Ingo Molnar <mingo@redhat.com> + * + * Fixes: + * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. + * Mikael Pettersson : Power Management for local APIC NMI watchdog. + * Pavel Machek and + * Mikael Pettersson : PM converted to driver model. Disable/enable API. + */ + +#include <linux/nmi.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/sysdev.h> +#include <linux/sysctl.h> +#include <linux/kprobes.h> +#include <linux/cpumask.h> +#include <linux/kdebug.h> + +#include <asm/smp.h> +#include <asm/nmi.h> +#include <asm/proto.h> +#include <asm/mce.h> + +int unknown_nmi_panic; +int nmi_watchdog_enabled; +int panic_on_unrecovered_nmi; + +static cpumask_t backtrace_mask = CPU_MASK_NONE; + +/* nmi_active: + * >0: the lapic NMI watchdog is active, but can be disabled + * <0: the lapic NMI watchdog has not been set up, and cannot + * be enabled + * 0: the lapic NMI watchdog is disabled, but can be enabled + */ +atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ +int panic_on_timeout; + +unsigned int nmi_watchdog = NMI_DEFAULT; +static unsigned int nmi_hz = HZ; + +static DEFINE_PER_CPU(short, wd_enabled); + +/* local prototypes */ +static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); + +/* Run after command line and cpu_init init, but before all other checks */ +void nmi_watchdog_default(void) +{ + if (nmi_watchdog != NMI_DEFAULT) + return; + nmi_watchdog = NMI_NONE; +} + +static int endflag __initdata = 0; + +#ifdef CONFIG_SMP +/* The performance counters used by NMI_LOCAL_APIC don't trigger when + * the CPU is idle. To make sure the NMI watchdog really ticks on all + * CPUs during the test make them busy. + */ +static __init void nmi_cpu_busy(void *data) +{ + local_irq_enable_in_hardirq(); + /* Intentionally don't use cpu_relax here. This is + to make sure that the performance counter really ticks, + even if there is a simulator or similar that catches the + pause instruction. On a real HT machine this is fine because + all other CPUs are busy with "useless" delay loops and don't + care if they get somewhat less cycles. */ + while (endflag == 0) + mb(); +} +#endif + +int __init check_nmi_watchdog (void) +{ + int *counts; + int cpu; + + if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) + return 0; + + if (!atomic_read(&nmi_active)) + return 0; + + counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); + if (!counts) + return -1; + + printk(KERN_INFO "testing NMI watchdog ... "); + +#ifdef CONFIG_SMP + if (nmi_watchdog == NMI_LOCAL_APIC) + smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); +#endif + + for (cpu = 0; cpu < NR_CPUS; cpu++) + counts[cpu] = cpu_pda(cpu)->__nmi_count; + local_irq_enable(); + mdelay((20*1000)/nmi_hz); // wait 20 ticks + + for_each_online_cpu(cpu) { + if (!per_cpu(wd_enabled, cpu)) + continue; + if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) { + printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", + cpu, + counts[cpu], + cpu_pda(cpu)->__nmi_count); + per_cpu(wd_enabled, cpu) = 0; + atomic_dec(&nmi_active); + } + } + if (!atomic_read(&nmi_active)) { + kfree(counts); + atomic_set(&nmi_active, -1); + endflag = 1; + return -1; + } + endflag = 1; + printk("OK.\n"); + + /* now that we know it works we can reduce NMI frequency to + something more reasonable; makes a difference in some configs */ + if (nmi_watchdog == NMI_LOCAL_APIC) + nmi_hz = lapic_adjust_nmi_hz(1); + + kfree(counts); + return 0; +} + +int __init setup_nmi_watchdog(char *str) +{ + int nmi; + + if (!strncmp(str,"panic",5)) { + panic_on_timeout = 1; + str = strchr(str, ','); + if (!str) + return 1; + ++str; + } + + get_option(&str, &nmi); + + if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) + return 0; + + nmi_watchdog = nmi; + return 1; +} + +__setup("nmi_watchdog=", setup_nmi_watchdog); + + +static void __acpi_nmi_disable(void *__unused) +{ + apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); +} + +/* + * Disable timer based NMIs on all CPUs: + */ +void acpi_nmi_disable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); +} + +static void __acpi_nmi_enable(void *__unused) +{ + apic_write(APIC_LVT0, APIC_DM_NMI); +} + +/* + * Enable timer based NMIs on all CPUs: + */ +void acpi_nmi_enable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); +} +#ifdef CONFIG_PM + +static int nmi_pm_active; /* nmi_active before suspend */ + +static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) +{ + /* only CPU0 goes here, other CPUs should be offline */ + nmi_pm_active = atomic_read(&nmi_active); + stop_apic_nmi_watchdog(NULL); + BUG_ON(atomic_read(&nmi_active) != 0); + return 0; +} + +static int lapic_nmi_resume(struct sys_device *dev) +{ + /* only CPU0 goes here, other CPUs should be offline */ + if (nmi_pm_active > 0) { + setup_apic_nmi_watchdog(NULL); + touch_nmi_watchdog(); + } + return 0; +} + +static struct sysdev_class nmi_sysclass = { + set_kset_name("lapic_nmi"), + .resume = lapic_nmi_resume, + .suspend = lapic_nmi_suspend, +}; + +static struct sys_device device_lapic_nmi = { + .id = 0, + .cls = &nmi_sysclass, +}; + +static int __init init_lapic_nmi_sysfs(void) +{ + int error; + + /* should really be a BUG_ON but b/c this is an + * init call, it just doesn't work. -dcz + */ + if (nmi_watchdog != NMI_LOCAL_APIC) + return 0; + + if ( atomic_read(&nmi_active) < 0 ) + return 0; + + error = sysdev_class_register(&nmi_sysclass); + if (!error) + error = sysdev_register(&device_lapic_nmi); + return error; +} +/* must come after the local APIC's device_initcall() */ +late_initcall(init_lapic_nmi_sysfs); + +#endif /* CONFIG_PM */ + +void setup_apic_nmi_watchdog(void *unused) +{ + if (__get_cpu_var(wd_enabled) == 1) + return; + + /* cheap hack to support suspend/resume */ + /* if cpu0 is not active neither should the other cpus */ + if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) + return; + + switch (nmi_watchdog) { + case NMI_LOCAL_APIC: + __get_cpu_var(wd_enabled) = 1; + if (lapic_watchdog_init(nmi_hz) < 0) { + __get_cpu_var(wd_enabled) = 0; + return; + } + /* FALL THROUGH */ + case NMI_IO_APIC: + __get_cpu_var(wd_enabled) = 1; + atomic_inc(&nmi_active); + } +} + +void stop_apic_nmi_watchdog(void *unused) +{ + /* only support LOCAL and IO APICs for now */ + if ((nmi_watchdog != NMI_LOCAL_APIC) && + (nmi_watchdog != NMI_IO_APIC)) + return; + if (__get_cpu_var(wd_enabled) == 0) + return; + if (nmi_watchdog == NMI_LOCAL_APIC) + lapic_watchdog_stop(); + __get_cpu_var(wd_enabled) = 0; + atomic_dec(&nmi_active); +} + +/* + * the best way to detect whether a CPU has a 'hard lockup' problem + * is to check it's local APIC timer IRQ counts. If they are not + * changing then that CPU has some problem. + * + * as these watchdog NMI IRQs are generated on every CPU, we only + * have to check the current processor. + */ + +static DEFINE_PER_CPU(unsigned, last_irq_sum); +static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(int, nmi_touch); + +void touch_nmi_watchdog(void) +{ + if (nmi_watchdog > 0) { + unsigned cpu; + + /* + * Tell other CPUs to reset their alert counters. We cannot + * do it ourselves because the alert count increase is not + * atomic. + */ + for_each_present_cpu(cpu) { + if (per_cpu(nmi_touch, cpu) != 1) + per_cpu(nmi_touch, cpu) = 1; + } + } + + touch_softlockup_watchdog(); +} + +int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) +{ + int sum; + int touched = 0; + int cpu = smp_processor_id(); + int rc = 0; + + /* check for other users first */ + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) { + rc = 1; + touched = 1; + } + + sum = read_pda(apic_timer_irqs); + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } + + if (cpu_isset(cpu, backtrace_mask)) { + static DEFINE_SPINLOCK(lock); /* Serialise the printks */ + + spin_lock(&lock); + printk("NMI backtrace for cpu %d\n", cpu); + dump_stack(); + spin_unlock(&lock); + cpu_clear(cpu, backtrace_mask); + } + +#ifdef CONFIG_X86_MCE + /* Could check oops_in_progress here too, but it's safer + not too */ + if (atomic_read(&mce_entry) > 0) + touched = 1; +#endif + /* if the apic timer isn't firing, this cpu isn't doing much */ + if (!touched && __get_cpu_var(last_irq_sum) == sum) { + /* + * Ayiee, looks like this CPU is stuck ... + * wait a few IRQs (5 seconds) before doing the oops ... + */ + local_inc(&__get_cpu_var(alert_counter)); + if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) + die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs, + panic_on_timeout); + } else { + __get_cpu_var(last_irq_sum) = sum; + local_set(&__get_cpu_var(alert_counter), 0); + } + + /* see if the nmi watchdog went off */ + if (!__get_cpu_var(wd_enabled)) + return rc; + switch (nmi_watchdog) { + case NMI_LOCAL_APIC: + rc |= lapic_wd_event(nmi_hz); + break; + case NMI_IO_APIC: + /* don't know how to accurately check for this. + * just assume it was a watchdog timer interrupt + * This matches the old behaviour. + */ + rc = 1; + break; + } + return rc; +} + +static unsigned ignore_nmis; + +asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code) +{ + nmi_enter(); + add_pda(__nmi_count,1); + if (!ignore_nmis) + default_do_nmi(regs); + nmi_exit(); +} + +int do_nmi_callback(struct pt_regs * regs, int cpu) +{ +#ifdef CONFIG_SYSCTL + if (unknown_nmi_panic) + return unknown_nmi_panic_callback(regs, cpu); +#endif + return 0; +} + +void stop_nmi(void) +{ + acpi_nmi_disable(); + ignore_nmis++; +} + +void restart_nmi(void) +{ + ignore_nmis--; + acpi_nmi_enable(); +} + +#ifdef CONFIG_SYSCTL + +static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) +{ + unsigned char reason = get_nmi_reason(); + char buf[64]; + + sprintf(buf, "NMI received for unknown reason %02x\n", reason); + die_nmi(buf, regs, 1); /* Always panic here */ + return 0; +} + +/* + * proc handler for /proc/sys/kernel/nmi + */ +int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, + void __user *buffer, size_t *length, loff_t *ppos) +{ + int old_state; + + nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; + old_state = nmi_watchdog_enabled; + proc_dointvec(table, write, file, buffer, length, ppos); + if (!!old_state == !!nmi_watchdog_enabled) + return 0; + + if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { + printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); + return -EIO; + } + + /* if nmi_watchdog is not set yet, then set it */ + nmi_watchdog_default(); + + if (nmi_watchdog == NMI_LOCAL_APIC) { + if (nmi_watchdog_enabled) + enable_lapic_nmi_watchdog(); + else + disable_lapic_nmi_watchdog(); + } else { + printk( KERN_WARNING + "NMI watchdog doesn't know what hardware to touch\n"); + return -EIO; + } + return 0; +} + +#endif + +void __trigger_all_cpu_backtrace(void) +{ + int i; + + backtrace_mask = cpu_online_map; + /* Wait for up to 10 seconds for all CPUs to do the backtrace */ + for (i = 0; i < 10 * 1000; i++) { + if (cpus_empty(backtrace_mask)) + break; + mdelay(1); + } +} + +EXPORT_SYMBOL(nmi_active); +EXPORT_SYMBOL(nmi_watchdog); +EXPORT_SYMBOL(touch_nmi_watchdog); diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c new file mode 100644 index 000000000000..9000d82c6dc0 --- /dev/null +++ b/arch/x86/kernel/numaq_32.c @@ -0,0 +1,89 @@ +/* + * Written by: Patricia Gaughen, IBM Corporation + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <gone@us.ibm.com> + */ + +#include <linux/mm.h> +#include <linux/bootmem.h> +#include <linux/mmzone.h> +#include <linux/module.h> +#include <linux/nodemask.h> +#include <asm/numaq.h> +#include <asm/topology.h> +#include <asm/processor.h> + +#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT)) + +/* + * Function: smp_dump_qct() + * + * Description: gets memory layout from the quad config table. This + * function also updates node_online_map with the nodes (quads) present. + */ +static void __init smp_dump_qct(void) +{ + int node; + struct eachquadmem *eq; + struct sys_cfg_data *scd = + (struct sys_cfg_data *)__va(SYS_CFG_DATA_PRIV_ADDR); + + nodes_clear(node_online_map); + for_each_node(node) { + if (scd->quads_present31_0 & (1 << node)) { + node_set_online(node); + eq = &scd->eq[node]; + /* Convert to pages */ + node_start_pfn[node] = MB_TO_PAGES( + eq->hi_shrd_mem_start - eq->priv_mem_size); + node_end_pfn[node] = MB_TO_PAGES( + eq->hi_shrd_mem_start + eq->hi_shrd_mem_size); + + memory_present(node, + node_start_pfn[node], node_end_pfn[node]); + node_remap_size[node] = node_memmap_size_bytes(node, + node_start_pfn[node], + node_end_pfn[node]); + } + } +} + +/* + * Unlike Summit, we don't really care to let the NUMA-Q + * fall back to flat mode. Don't compile for NUMA-Q + * unless you really need it! + */ +int __init get_memcfg_numaq(void) +{ + smp_dump_qct(); + return 1; +} + +static int __init numaq_tsc_disable(void) +{ + if (num_online_nodes() > 1) { + printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); + tsc_disable = 1; + } + return 0; +} +arch_initcall(numaq_tsc_disable); diff --git a/arch/x86/kernel/paravirt_32.c b/arch/x86/kernel/paravirt_32.c new file mode 100644 index 000000000000..739cfb207dd7 --- /dev/null +++ b/arch/x86/kernel/paravirt_32.c @@ -0,0 +1,392 @@ +/* Paravirtualization interfaces + Copyright (C) 2006 Rusty Russell IBM Corporation + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/efi.h> +#include <linux/bcd.h> +#include <linux/highmem.h> + +#include <asm/bug.h> +#include <asm/paravirt.h> +#include <asm/desc.h> +#include <asm/setup.h> +#include <asm/arch_hooks.h> +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/delay.h> +#include <asm/fixmap.h> +#include <asm/apic.h> +#include <asm/tlbflush.h> +#include <asm/timer.h> + +/* nop stub */ +void _paravirt_nop(void) +{ +} + +static void __init default_banner(void) +{ + printk(KERN_INFO "Booting paravirtualized kernel on %s\n", + paravirt_ops.name); +} + +char *memory_setup(void) +{ + return paravirt_ops.memory_setup(); +} + +/* Simple instruction patching code. */ +#define DEF_NATIVE(name, code) \ + extern const char start_##name[], end_##name[]; \ + asm("start_" #name ": " code "; end_" #name ":") + +DEF_NATIVE(irq_disable, "cli"); +DEF_NATIVE(irq_enable, "sti"); +DEF_NATIVE(restore_fl, "push %eax; popf"); +DEF_NATIVE(save_fl, "pushf; pop %eax"); +DEF_NATIVE(iret, "iret"); +DEF_NATIVE(irq_enable_sysexit, "sti; sysexit"); +DEF_NATIVE(read_cr2, "mov %cr2, %eax"); +DEF_NATIVE(write_cr3, "mov %eax, %cr3"); +DEF_NATIVE(read_cr3, "mov %cr3, %eax"); +DEF_NATIVE(clts, "clts"); +DEF_NATIVE(read_tsc, "rdtsc"); + +DEF_NATIVE(ud2a, "ud2a"); + +static unsigned native_patch(u8 type, u16 clobbers, void *ibuf, + unsigned long addr, unsigned len) +{ + const unsigned char *start, *end; + unsigned ret; + + switch(type) { +#define SITE(x) case PARAVIRT_PATCH(x): start = start_##x; end = end_##x; goto patch_site + SITE(irq_disable); + SITE(irq_enable); + SITE(restore_fl); + SITE(save_fl); + SITE(iret); + SITE(irq_enable_sysexit); + SITE(read_cr2); + SITE(read_cr3); + SITE(write_cr3); + SITE(clts); + SITE(read_tsc); +#undef SITE + + patch_site: + ret = paravirt_patch_insns(ibuf, len, start, end); + break; + + case PARAVIRT_PATCH(make_pgd): + case PARAVIRT_PATCH(make_pte): + case PARAVIRT_PATCH(pgd_val): + case PARAVIRT_PATCH(pte_val): +#ifdef CONFIG_X86_PAE + case PARAVIRT_PATCH(make_pmd): + case PARAVIRT_PATCH(pmd_val): +#endif + /* These functions end up returning exactly what + they're passed, in the same registers. */ + ret = paravirt_patch_nop(); + break; + + default: + ret = paravirt_patch_default(type, clobbers, ibuf, addr, len); + break; + } + + return ret; +} + +unsigned paravirt_patch_nop(void) +{ + return 0; +} + +unsigned paravirt_patch_ignore(unsigned len) +{ + return len; +} + +struct branch { + unsigned char opcode; + u32 delta; +} __attribute__((packed)); + +unsigned paravirt_patch_call(void *insnbuf, + const void *target, u16 tgt_clobbers, + unsigned long addr, u16 site_clobbers, + unsigned len) +{ + struct branch *b = insnbuf; + unsigned long delta = (unsigned long)target - (addr+5); + + if (tgt_clobbers & ~site_clobbers) + return len; /* target would clobber too much for this site */ + if (len < 5) + return len; /* call too long for patch site */ + + b->opcode = 0xe8; /* call */ + b->delta = delta; + BUILD_BUG_ON(sizeof(*b) != 5); + + return 5; +} + +unsigned paravirt_patch_jmp(const void *target, void *insnbuf, + unsigned long addr, unsigned len) +{ + struct branch *b = insnbuf; + unsigned long delta = (unsigned long)target - (addr+5); + + if (len < 5) + return len; /* call too long for patch site */ + + b->opcode = 0xe9; /* jmp */ + b->delta = delta; + + return 5; +} + +unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf, + unsigned long addr, unsigned len) +{ + void *opfunc = *((void **)¶virt_ops + type); + unsigned ret; + + if (opfunc == NULL) + /* If there's no function, patch it with a ud2a (BUG) */ + ret = paravirt_patch_insns(insnbuf, len, start_ud2a, end_ud2a); + else if (opfunc == paravirt_nop) + /* If the operation is a nop, then nop the callsite */ + ret = paravirt_patch_nop(); + else if (type == PARAVIRT_PATCH(iret) || + type == PARAVIRT_PATCH(irq_enable_sysexit)) + /* If operation requires a jmp, then jmp */ + ret = paravirt_patch_jmp(opfunc, insnbuf, addr, len); + else + /* Otherwise call the function; assume target could + clobber any caller-save reg */ + ret = paravirt_patch_call(insnbuf, opfunc, CLBR_ANY, + addr, clobbers, len); + + return ret; +} + +unsigned paravirt_patch_insns(void *insnbuf, unsigned len, + const char *start, const char *end) +{ + unsigned insn_len = end - start; + + if (insn_len > len || start == NULL) + insn_len = len; + else + memcpy(insnbuf, start, insn_len); + + return insn_len; +} + +void init_IRQ(void) +{ + paravirt_ops.init_IRQ(); +} + +static void native_flush_tlb(void) +{ + __native_flush_tlb(); +} + +/* + * Global pages have to be flushed a bit differently. Not a real + * performance problem because this does not happen often. + */ +static void native_flush_tlb_global(void) +{ + __native_flush_tlb_global(); +} + +static void native_flush_tlb_single(unsigned long addr) +{ + __native_flush_tlb_single(addr); +} + +/* These are in entry.S */ +extern void native_iret(void); +extern void native_irq_enable_sysexit(void); + +static int __init print_banner(void) +{ + paravirt_ops.banner(); + return 0; +} +core_initcall(print_banner); + +static struct resource reserve_ioports = { + .start = 0, + .end = IO_SPACE_LIMIT, + .name = "paravirt-ioport", + .flags = IORESOURCE_IO | IORESOURCE_BUSY, +}; + +static struct resource reserve_iomem = { + .start = 0, + .end = -1, + .name = "paravirt-iomem", + .flags = IORESOURCE_MEM | IORESOURCE_BUSY, +}; + +/* + * Reserve the whole legacy IO space to prevent any legacy drivers + * from wasting time probing for their hardware. This is a fairly + * brute-force approach to disabling all non-virtual drivers. + * + * Note that this must be called very early to have any effect. + */ +int paravirt_disable_iospace(void) +{ + int ret; + + ret = request_resource(&ioport_resource, &reserve_ioports); + if (ret == 0) { + ret = request_resource(&iomem_resource, &reserve_iomem); + if (ret) + release_resource(&reserve_ioports); + } + + return ret; +} + +struct paravirt_ops paravirt_ops = { + .name = "bare hardware", + .paravirt_enabled = 0, + .kernel_rpl = 0, + .shared_kernel_pmd = 1, /* Only used when CONFIG_X86_PAE is set */ + + .patch = native_patch, + .banner = default_banner, + .arch_setup = paravirt_nop, + .memory_setup = machine_specific_memory_setup, + .get_wallclock = native_get_wallclock, + .set_wallclock = native_set_wallclock, + .time_init = hpet_time_init, + .init_IRQ = native_init_IRQ, + + .cpuid = native_cpuid, + .get_debugreg = native_get_debugreg, + .set_debugreg = native_set_debugreg, + .clts = native_clts, + .read_cr0 = native_read_cr0, + .write_cr0 = native_write_cr0, + .read_cr2 = native_read_cr2, + .write_cr2 = native_write_cr2, + .read_cr3 = native_read_cr3, + .write_cr3 = native_write_cr3, + .read_cr4 = native_read_cr4, + .read_cr4_safe = native_read_cr4_safe, + .write_cr4 = native_write_cr4, + .save_fl = native_save_fl, + .restore_fl = native_restore_fl, + .irq_disable = native_irq_disable, + .irq_enable = native_irq_enable, + .safe_halt = native_safe_halt, + .halt = native_halt, + .wbinvd = native_wbinvd, + .read_msr = native_read_msr_safe, + .write_msr = native_write_msr_safe, + .read_tsc = native_read_tsc, + .read_pmc = native_read_pmc, + .sched_clock = native_sched_clock, + .get_cpu_khz = native_calculate_cpu_khz, + .load_tr_desc = native_load_tr_desc, + .set_ldt = native_set_ldt, + .load_gdt = native_load_gdt, + .load_idt = native_load_idt, + .store_gdt = native_store_gdt, + .store_idt = native_store_idt, + .store_tr = native_store_tr, + .load_tls = native_load_tls, + .write_ldt_entry = write_dt_entry, + .write_gdt_entry = write_dt_entry, + .write_idt_entry = write_dt_entry, + .load_esp0 = native_load_esp0, + + .set_iopl_mask = native_set_iopl_mask, + .io_delay = native_io_delay, + +#ifdef CONFIG_X86_LOCAL_APIC + .apic_write = native_apic_write, + .apic_write_atomic = native_apic_write_atomic, + .apic_read = native_apic_read, + .setup_boot_clock = setup_boot_APIC_clock, + .setup_secondary_clock = setup_secondary_APIC_clock, + .startup_ipi_hook = paravirt_nop, +#endif + .set_lazy_mode = paravirt_nop, + + .pagetable_setup_start = native_pagetable_setup_start, + .pagetable_setup_done = native_pagetable_setup_done, + + .flush_tlb_user = native_flush_tlb, + .flush_tlb_kernel = native_flush_tlb_global, + .flush_tlb_single = native_flush_tlb_single, + .flush_tlb_others = native_flush_tlb_others, + + .alloc_pt = paravirt_nop, + .alloc_pd = paravirt_nop, + .alloc_pd_clone = paravirt_nop, + .release_pt = paravirt_nop, + .release_pd = paravirt_nop, + + .set_pte = native_set_pte, + .set_pte_at = native_set_pte_at, + .set_pmd = native_set_pmd, + .pte_update = paravirt_nop, + .pte_update_defer = paravirt_nop, + +#ifdef CONFIG_HIGHPTE + .kmap_atomic_pte = kmap_atomic, +#endif + +#ifdef CONFIG_X86_PAE + .set_pte_atomic = native_set_pte_atomic, + .set_pte_present = native_set_pte_present, + .set_pud = native_set_pud, + .pte_clear = native_pte_clear, + .pmd_clear = native_pmd_clear, + + .pmd_val = native_pmd_val, + .make_pmd = native_make_pmd, +#endif + + .pte_val = native_pte_val, + .pgd_val = native_pgd_val, + + .make_pte = native_make_pte, + .make_pgd = native_make_pgd, + + .irq_enable_sysexit = native_irq_enable_sysexit, + .iret = native_iret, + + .dup_mmap = paravirt_nop, + .exit_mmap = paravirt_nop, + .activate_mm = paravirt_nop, +}; + +EXPORT_SYMBOL(paravirt_ops); diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c new file mode 100644 index 000000000000..71da01e73f03 --- /dev/null +++ b/arch/x86/kernel/pci-calgary_64.c @@ -0,0 +1,1578 @@ +/* + * Derived from arch/powerpc/kernel/iommu.c + * + * Copyright IBM Corporation, 2006-2007 + * Copyright (C) 2006 Jon Mason <jdmason@kudzu.us> + * + * Author: Jon Mason <jdmason@kudzu.us> + * Author: Muli Ben-Yehuda <muli@il.ibm.com> + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/pci_ids.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <asm/iommu.h> +#include <asm/calgary.h> +#include <asm/tce.h> +#include <asm/pci-direct.h> +#include <asm/system.h> +#include <asm/dma.h> +#include <asm/rio.h> + +#ifdef CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT +int use_calgary __read_mostly = 1; +#else +int use_calgary __read_mostly = 0; +#endif /* CONFIG_CALGARY_DEFAULT_ENABLED */ + +#define PCI_DEVICE_ID_IBM_CALGARY 0x02a1 +#define PCI_DEVICE_ID_IBM_CALIOC2 0x0308 + +/* register offsets inside the host bridge space */ +#define CALGARY_CONFIG_REG 0x0108 +#define PHB_CSR_OFFSET 0x0110 /* Channel Status */ +#define PHB_PLSSR_OFFSET 0x0120 +#define PHB_CONFIG_RW_OFFSET 0x0160 +#define PHB_IOBASE_BAR_LOW 0x0170 +#define PHB_IOBASE_BAR_HIGH 0x0180 +#define PHB_MEM_1_LOW 0x0190 +#define PHB_MEM_1_HIGH 0x01A0 +#define PHB_IO_ADDR_SIZE 0x01B0 +#define PHB_MEM_1_SIZE 0x01C0 +#define PHB_MEM_ST_OFFSET 0x01D0 +#define PHB_AER_OFFSET 0x0200 +#define PHB_CONFIG_0_HIGH 0x0220 +#define PHB_CONFIG_0_LOW 0x0230 +#define PHB_CONFIG_0_END 0x0240 +#define PHB_MEM_2_LOW 0x02B0 +#define PHB_MEM_2_HIGH 0x02C0 +#define PHB_MEM_2_SIZE_HIGH 0x02D0 +#define PHB_MEM_2_SIZE_LOW 0x02E0 +#define PHB_DOSHOLE_OFFSET 0x08E0 + +/* CalIOC2 specific */ +#define PHB_SAVIOR_L2 0x0DB0 +#define PHB_PAGE_MIG_CTRL 0x0DA8 +#define PHB_PAGE_MIG_DEBUG 0x0DA0 +#define PHB_ROOT_COMPLEX_STATUS 0x0CB0 + +/* PHB_CONFIG_RW */ +#define PHB_TCE_ENABLE 0x20000000 +#define PHB_SLOT_DISABLE 0x1C000000 +#define PHB_DAC_DISABLE 0x01000000 +#define PHB_MEM2_ENABLE 0x00400000 +#define PHB_MCSR_ENABLE 0x00100000 +/* TAR (Table Address Register) */ +#define TAR_SW_BITS 0x0000ffffffff800fUL +#define TAR_VALID 0x0000000000000008UL +/* CSR (Channel/DMA Status Register) */ +#define CSR_AGENT_MASK 0xffe0ffff +/* CCR (Calgary Configuration Register) */ +#define CCR_2SEC_TIMEOUT 0x000000000000000EUL +/* PMCR/PMDR (Page Migration Control/Debug Registers */ +#define PMR_SOFTSTOP 0x80000000 +#define PMR_SOFTSTOPFAULT 0x40000000 +#define PMR_HARDSTOP 0x20000000 + +#define MAX_NUM_OF_PHBS 8 /* how many PHBs in total? */ +#define MAX_NUM_CHASSIS 8 /* max number of chassis */ +/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */ +#define MAX_PHB_BUS_NUM (MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2) +#define PHBS_PER_CALGARY 4 + +/* register offsets in Calgary's internal register space */ +static const unsigned long tar_offsets[] = { + 0x0580 /* TAR0 */, + 0x0588 /* TAR1 */, + 0x0590 /* TAR2 */, + 0x0598 /* TAR3 */ +}; + +static const unsigned long split_queue_offsets[] = { + 0x4870 /* SPLIT QUEUE 0 */, + 0x5870 /* SPLIT QUEUE 1 */, + 0x6870 /* SPLIT QUEUE 2 */, + 0x7870 /* SPLIT QUEUE 3 */ +}; + +static const unsigned long phb_offsets[] = { + 0x8000 /* PHB0 */, + 0x9000 /* PHB1 */, + 0xA000 /* PHB2 */, + 0xB000 /* PHB3 */ +}; + +/* PHB debug registers */ + +static const unsigned long phb_debug_offsets[] = { + 0x4000 /* PHB 0 DEBUG */, + 0x5000 /* PHB 1 DEBUG */, + 0x6000 /* PHB 2 DEBUG */, + 0x7000 /* PHB 3 DEBUG */ +}; + +/* + * STUFF register for each debug PHB, + * byte 1 = start bus number, byte 2 = end bus number + */ + +#define PHB_DEBUG_STUFF_OFFSET 0x0020 + +#define EMERGENCY_PAGES 32 /* = 128KB */ + +unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED; +static int translate_empty_slots __read_mostly = 0; +static int calgary_detected __read_mostly = 0; + +static struct rio_table_hdr *rio_table_hdr __initdata; +static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata; +static struct rio_detail *rio_devs[MAX_NUMNODES * 4] __initdata; + +struct calgary_bus_info { + void *tce_space; + unsigned char translation_disabled; + signed char phbid; + void __iomem *bbar; +}; + +static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev); +static void calgary_tce_cache_blast(struct iommu_table *tbl); +static void calgary_dump_error_regs(struct iommu_table *tbl); +static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev); +static void calioc2_tce_cache_blast(struct iommu_table *tbl); +static void calioc2_dump_error_regs(struct iommu_table *tbl); + +static struct cal_chipset_ops calgary_chip_ops = { + .handle_quirks = calgary_handle_quirks, + .tce_cache_blast = calgary_tce_cache_blast, + .dump_error_regs = calgary_dump_error_regs +}; + +static struct cal_chipset_ops calioc2_chip_ops = { + .handle_quirks = calioc2_handle_quirks, + .tce_cache_blast = calioc2_tce_cache_blast, + .dump_error_regs = calioc2_dump_error_regs +}; + +static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, }; + +/* enable this to stress test the chip's TCE cache */ +#ifdef CONFIG_IOMMU_DEBUG +int debugging __read_mostly = 1; + +static inline unsigned long verify_bit_range(unsigned long* bitmap, + int expected, unsigned long start, unsigned long end) +{ + unsigned long idx = start; + + BUG_ON(start >= end); + + while (idx < end) { + if (!!test_bit(idx, bitmap) != expected) + return idx; + ++idx; + } + + /* all bits have the expected value */ + return ~0UL; +} +#else /* debugging is disabled */ +int debugging __read_mostly = 0; + +static inline unsigned long verify_bit_range(unsigned long* bitmap, + int expected, unsigned long start, unsigned long end) +{ + return ~0UL; +} + +#endif /* CONFIG_IOMMU_DEBUG */ + +static inline unsigned int num_dma_pages(unsigned long dma, unsigned int dmalen) +{ + unsigned int npages; + + npages = PAGE_ALIGN(dma + dmalen) - (dma & PAGE_MASK); + npages >>= PAGE_SHIFT; + + return npages; +} + +static inline int translate_phb(struct pci_dev* dev) +{ + int disabled = bus_info[dev->bus->number].translation_disabled; + return !disabled; +} + +static void iommu_range_reserve(struct iommu_table *tbl, + unsigned long start_addr, unsigned int npages) +{ + unsigned long index; + unsigned long end; + unsigned long badbit; + unsigned long flags; + + index = start_addr >> PAGE_SHIFT; + + /* bail out if we're asked to reserve a region we don't cover */ + if (index >= tbl->it_size) + return; + + end = index + npages; + if (end > tbl->it_size) /* don't go off the table */ + end = tbl->it_size; + + spin_lock_irqsave(&tbl->it_lock, flags); + + badbit = verify_bit_range(tbl->it_map, 0, index, end); + if (badbit != ~0UL) { + if (printk_ratelimit()) + printk(KERN_ERR "Calgary: entry already allocated at " + "0x%lx tbl %p dma 0x%lx npages %u\n", + badbit, tbl, start_addr, npages); + } + + set_bit_string(tbl->it_map, index, npages); + + spin_unlock_irqrestore(&tbl->it_lock, flags); +} + +static unsigned long iommu_range_alloc(struct iommu_table *tbl, + unsigned int npages) +{ + unsigned long flags; + unsigned long offset; + + BUG_ON(npages == 0); + + spin_lock_irqsave(&tbl->it_lock, flags); + + offset = find_next_zero_string(tbl->it_map, tbl->it_hint, + tbl->it_size, npages); + if (offset == ~0UL) { + tbl->chip_ops->tce_cache_blast(tbl); + offset = find_next_zero_string(tbl->it_map, 0, + tbl->it_size, npages); + if (offset == ~0UL) { + printk(KERN_WARNING "Calgary: IOMMU full.\n"); + spin_unlock_irqrestore(&tbl->it_lock, flags); + if (panic_on_overflow) + panic("Calgary: fix the allocator.\n"); + else + return bad_dma_address; + } + } + + set_bit_string(tbl->it_map, offset, npages); + tbl->it_hint = offset + npages; + BUG_ON(tbl->it_hint > tbl->it_size); + + spin_unlock_irqrestore(&tbl->it_lock, flags); + + return offset; +} + +static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *vaddr, + unsigned int npages, int direction) +{ + unsigned long entry; + dma_addr_t ret = bad_dma_address; + + entry = iommu_range_alloc(tbl, npages); + + if (unlikely(entry == bad_dma_address)) + goto error; + + /* set the return dma address */ + ret = (entry << PAGE_SHIFT) | ((unsigned long)vaddr & ~PAGE_MASK); + + /* put the TCEs in the HW table */ + tce_build(tbl, entry, npages, (unsigned long)vaddr & PAGE_MASK, + direction); + + return ret; + +error: + printk(KERN_WARNING "Calgary: failed to allocate %u pages in " + "iommu %p\n", npages, tbl); + return bad_dma_address; +} + +static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, + unsigned int npages) +{ + unsigned long entry; + unsigned long badbit; + unsigned long badend; + unsigned long flags; + + /* were we called with bad_dma_address? */ + badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE); + if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) { + printk(KERN_ERR "Calgary: driver tried unmapping bad DMA " + "address 0x%Lx\n", dma_addr); + WARN_ON(1); + return; + } + + entry = dma_addr >> PAGE_SHIFT; + + BUG_ON(entry + npages > tbl->it_size); + + tce_free(tbl, entry, npages); + + spin_lock_irqsave(&tbl->it_lock, flags); + + badbit = verify_bit_range(tbl->it_map, 1, entry, entry + npages); + if (badbit != ~0UL) { + if (printk_ratelimit()) + printk(KERN_ERR "Calgary: bit is off at 0x%lx " + "tbl %p dma 0x%Lx entry 0x%lx npages %u\n", + badbit, tbl, dma_addr, entry, npages); + } + + __clear_bit_string(tbl->it_map, entry, npages); + + spin_unlock_irqrestore(&tbl->it_lock, flags); +} + +static inline struct iommu_table *find_iommu_table(struct device *dev) +{ + struct pci_dev *pdev; + struct pci_bus *pbus; + struct iommu_table *tbl; + + pdev = to_pci_dev(dev); + + pbus = pdev->bus; + + /* is the device behind a bridge? Look for the root bus */ + while (pbus->parent) + pbus = pbus->parent; + + tbl = pci_iommu(pbus); + + BUG_ON(tbl && (tbl->it_busno != pbus->number)); + + return tbl; +} + +static void calgary_unmap_sg(struct device *dev, + struct scatterlist *sglist, int nelems, int direction) +{ + struct iommu_table *tbl = find_iommu_table(dev); + + if (!translate_phb(to_pci_dev(dev))) + return; + + while (nelems--) { + unsigned int npages; + dma_addr_t dma = sglist->dma_address; + unsigned int dmalen = sglist->dma_length; + + if (dmalen == 0) + break; + + npages = num_dma_pages(dma, dmalen); + iommu_free(tbl, dma, npages); + sglist++; + } +} + +static int calgary_nontranslate_map_sg(struct device* dev, + struct scatterlist *sg, int nelems, int direction) +{ + int i; + + for (i = 0; i < nelems; i++ ) { + struct scatterlist *s = &sg[i]; + BUG_ON(!s->page); + s->dma_address = virt_to_bus(page_address(s->page) +s->offset); + s->dma_length = s->length; + } + return nelems; +} + +static int calgary_map_sg(struct device *dev, struct scatterlist *sg, + int nelems, int direction) +{ + struct iommu_table *tbl = find_iommu_table(dev); + unsigned long vaddr; + unsigned int npages; + unsigned long entry; + int i; + + if (!translate_phb(to_pci_dev(dev))) + return calgary_nontranslate_map_sg(dev, sg, nelems, direction); + + for (i = 0; i < nelems; i++ ) { + struct scatterlist *s = &sg[i]; + BUG_ON(!s->page); + + vaddr = (unsigned long)page_address(s->page) + s->offset; + npages = num_dma_pages(vaddr, s->length); + + entry = iommu_range_alloc(tbl, npages); + if (entry == bad_dma_address) { + /* makes sure unmap knows to stop */ + s->dma_length = 0; + goto error; + } + + s->dma_address = (entry << PAGE_SHIFT) | s->offset; + + /* insert into HW table */ + tce_build(tbl, entry, npages, vaddr & PAGE_MASK, + direction); + + s->dma_length = s->length; + } + + return nelems; +error: + calgary_unmap_sg(dev, sg, nelems, direction); + for (i = 0; i < nelems; i++) { + sg[i].dma_address = bad_dma_address; + sg[i].dma_length = 0; + } + return 0; +} + +static dma_addr_t calgary_map_single(struct device *dev, void *vaddr, + size_t size, int direction) +{ + dma_addr_t dma_handle = bad_dma_address; + unsigned long uaddr; + unsigned int npages; + struct iommu_table *tbl = find_iommu_table(dev); + + uaddr = (unsigned long)vaddr; + npages = num_dma_pages(uaddr, size); + + if (translate_phb(to_pci_dev(dev))) + dma_handle = iommu_alloc(tbl, vaddr, npages, direction); + else + dma_handle = virt_to_bus(vaddr); + + return dma_handle; +} + +static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle, + size_t size, int direction) +{ + struct iommu_table *tbl = find_iommu_table(dev); + unsigned int npages; + + if (!translate_phb(to_pci_dev(dev))) + return; + + npages = num_dma_pages(dma_handle, size); + iommu_free(tbl, dma_handle, npages); +} + +static void* calgary_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + void *ret = NULL; + dma_addr_t mapping; + unsigned int npages, order; + struct iommu_table *tbl = find_iommu_table(dev); + + size = PAGE_ALIGN(size); /* size rounded up to full pages */ + npages = size >> PAGE_SHIFT; + order = get_order(size); + + /* alloc enough pages (and possibly more) */ + ret = (void *)__get_free_pages(flag, order); + if (!ret) + goto error; + memset(ret, 0, size); + + if (translate_phb(to_pci_dev(dev))) { + /* set up tces to cover the allocated range */ + mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL); + if (mapping == bad_dma_address) + goto free; + + *dma_handle = mapping; + } else /* non translated slot */ + *dma_handle = virt_to_bus(ret); + + return ret; + +free: + free_pages((unsigned long)ret, get_order(size)); + ret = NULL; +error: + return ret; +} + +static const struct dma_mapping_ops calgary_dma_ops = { + .alloc_coherent = calgary_alloc_coherent, + .map_single = calgary_map_single, + .unmap_single = calgary_unmap_single, + .map_sg = calgary_map_sg, + .unmap_sg = calgary_unmap_sg, +}; + +static inline void __iomem * busno_to_bbar(unsigned char num) +{ + return bus_info[num].bbar; +} + +static inline int busno_to_phbid(unsigned char num) +{ + return bus_info[num].phbid; +} + +static inline unsigned long split_queue_offset(unsigned char num) +{ + size_t idx = busno_to_phbid(num); + + return split_queue_offsets[idx]; +} + +static inline unsigned long tar_offset(unsigned char num) +{ + size_t idx = busno_to_phbid(num); + + return tar_offsets[idx]; +} + +static inline unsigned long phb_offset(unsigned char num) +{ + size_t idx = busno_to_phbid(num); + + return phb_offsets[idx]; +} + +static inline void __iomem* calgary_reg(void __iomem *bar, unsigned long offset) +{ + unsigned long target = ((unsigned long)bar) | offset; + return (void __iomem*)target; +} + +static inline int is_calioc2(unsigned short device) +{ + return (device == PCI_DEVICE_ID_IBM_CALIOC2); +} + +static inline int is_calgary(unsigned short device) +{ + return (device == PCI_DEVICE_ID_IBM_CALGARY); +} + +static inline int is_cal_pci_dev(unsigned short device) +{ + return (is_calgary(device) || is_calioc2(device)); +} + +static void calgary_tce_cache_blast(struct iommu_table *tbl) +{ + u64 val; + u32 aer; + int i = 0; + void __iomem *bbar = tbl->bbar; + void __iomem *target; + + /* disable arbitration on the bus */ + target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_AER_OFFSET); + aer = readl(target); + writel(0, target); + + /* read plssr to ensure it got there */ + target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_PLSSR_OFFSET); + val = readl(target); + + /* poll split queues until all DMA activity is done */ + target = calgary_reg(bbar, split_queue_offset(tbl->it_busno)); + do { + val = readq(target); + i++; + } while ((val & 0xff) != 0xff && i < 100); + if (i == 100) + printk(KERN_WARNING "Calgary: PCI bus not quiesced, " + "continuing anyway\n"); + + /* invalidate TCE cache */ + target = calgary_reg(bbar, tar_offset(tbl->it_busno)); + writeq(tbl->tar_val, target); + + /* enable arbitration */ + target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_AER_OFFSET); + writel(aer, target); + (void)readl(target); /* flush */ +} + +static void calioc2_tce_cache_blast(struct iommu_table *tbl) +{ + void __iomem *bbar = tbl->bbar; + void __iomem *target; + u64 val64; + u32 val; + int i = 0; + int count = 1; + unsigned char bus = tbl->it_busno; + +begin: + printk(KERN_DEBUG "Calgary: CalIOC2 bus 0x%x entering tce cache blast " + "sequence - count %d\n", bus, count); + + /* 1. using the Page Migration Control reg set SoftStop */ + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "1a. read 0x%x [LE] from %p\n", val, target); + val |= PMR_SOFTSTOP; + printk(KERN_DEBUG "1b. writing 0x%x [LE] to %p\n", val, target); + writel(cpu_to_be32(val), target); + + /* 2. poll split queues until all DMA activity is done */ + printk(KERN_DEBUG "2a. starting to poll split queues\n"); + target = calgary_reg(bbar, split_queue_offset(bus)); + do { + val64 = readq(target); + i++; + } while ((val64 & 0xff) != 0xff && i < 100); + if (i == 100) + printk(KERN_WARNING "CalIOC2: PCI bus not quiesced, " + "continuing anyway\n"); + + /* 3. poll Page Migration DEBUG for SoftStopFault */ + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "3. read 0x%x [LE] from %p\n", val, target); + + /* 4. if SoftStopFault - goto (1) */ + if (val & PMR_SOFTSTOPFAULT) { + if (++count < 100) + goto begin; + else { + printk(KERN_WARNING "CalIOC2: too many SoftStopFaults, " + "aborting TCE cache flush sequence!\n"); + return; /* pray for the best */ + } + } + + /* 5. Slam into HardStop by reading PHB_PAGE_MIG_CTRL */ + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); + printk(KERN_DEBUG "5a. slamming into HardStop by reading %p\n", target); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "5b. read 0x%x [LE] from %p\n", val, target); + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "5c. read 0x%x [LE] from %p (debug)\n", val, target); + + /* 6. invalidate TCE cache */ + printk(KERN_DEBUG "6. invalidating TCE cache\n"); + target = calgary_reg(bbar, tar_offset(bus)); + writeq(tbl->tar_val, target); + + /* 7. Re-read PMCR */ + printk(KERN_DEBUG "7a. Re-reading PMCR\n"); + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "7b. read 0x%x [LE] from %p\n", val, target); + + /* 8. Remove HardStop */ + printk(KERN_DEBUG "8a. removing HardStop from PMCR\n"); + target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); + val = 0; + printk(KERN_DEBUG "8b. writing 0x%x [LE] to %p\n", val, target); + writel(cpu_to_be32(val), target); + val = be32_to_cpu(readl(target)); + printk(KERN_DEBUG "8c. read 0x%x [LE] from %p\n", val, target); +} + +static void __init calgary_reserve_mem_region(struct pci_dev *dev, u64 start, + u64 limit) +{ + unsigned int numpages; + + limit = limit | 0xfffff; + limit++; + + numpages = ((limit - start) >> PAGE_SHIFT); + iommu_range_reserve(pci_iommu(dev->bus), start, numpages); +} + +static void __init calgary_reserve_peripheral_mem_1(struct pci_dev *dev) +{ + void __iomem *target; + u64 low, high, sizelow; + u64 start, limit; + struct iommu_table *tbl = pci_iommu(dev->bus); + unsigned char busnum = dev->bus->number; + void __iomem *bbar = tbl->bbar; + + /* peripheral MEM_1 region */ + target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_LOW); + low = be32_to_cpu(readl(target)); + target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_HIGH); + high = be32_to_cpu(readl(target)); + target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_SIZE); + sizelow = be32_to_cpu(readl(target)); + + start = (high << 32) | low; + limit = sizelow; + + calgary_reserve_mem_region(dev, start, limit); +} + +static void __init calgary_reserve_peripheral_mem_2(struct pci_dev *dev) +{ + void __iomem *target; + u32 val32; + u64 low, high, sizelow, sizehigh; + u64 start, limit; + struct iommu_table *tbl = pci_iommu(dev->bus); + unsigned char busnum = dev->bus->number; + void __iomem *bbar = tbl->bbar; + + /* is it enabled? */ + target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET); + val32 = be32_to_cpu(readl(target)); + if (!(val32 & PHB_MEM2_ENABLE)) + return; + + target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_LOW); + low = be32_to_cpu(readl(target)); + target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_HIGH); + high = be32_to_cpu(readl(target)); + target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_SIZE_LOW); + sizelow = be32_to_cpu(readl(target)); + target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_SIZE_HIGH); + sizehigh = be32_to_cpu(readl(target)); + + start = (high << 32) | low; + limit = (sizehigh << 32) | sizelow; + + calgary_reserve_mem_region(dev, start, limit); +} + +/* + * some regions of the IO address space do not get translated, so we + * must not give devices IO addresses in those regions. The regions + * are the 640KB-1MB region and the two PCI peripheral memory holes. + * Reserve all of them in the IOMMU bitmap to avoid giving them out + * later. + */ +static void __init calgary_reserve_regions(struct pci_dev *dev) +{ + unsigned int npages; + u64 start; + struct iommu_table *tbl = pci_iommu(dev->bus); + + /* reserve EMERGENCY_PAGES from bad_dma_address and up */ + iommu_range_reserve(tbl, bad_dma_address, EMERGENCY_PAGES); + + /* avoid the BIOS/VGA first 640KB-1MB region */ + /* for CalIOC2 - avoid the entire first MB */ + if (is_calgary(dev->device)) { + start = (640 * 1024); + npages = ((1024 - 640) * 1024) >> PAGE_SHIFT; + } else { /* calioc2 */ + start = 0; + npages = (1 * 1024 * 1024) >> PAGE_SHIFT; + } + iommu_range_reserve(tbl, start, npages); + + /* reserve the two PCI peripheral memory regions in IO space */ + calgary_reserve_peripheral_mem_1(dev); + calgary_reserve_peripheral_mem_2(dev); +} + +static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar) +{ + u64 val64; + u64 table_phys; + void __iomem *target; + int ret; + struct iommu_table *tbl; + + /* build TCE tables for each PHB */ + ret = build_tce_table(dev, bbar); + if (ret) + return ret; + + tbl = pci_iommu(dev->bus); + tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space; + tce_free(tbl, 0, tbl->it_size); + + if (is_calgary(dev->device)) + tbl->chip_ops = &calgary_chip_ops; + else if (is_calioc2(dev->device)) + tbl->chip_ops = &calioc2_chip_ops; + else + BUG(); + + calgary_reserve_regions(dev); + + /* set TARs for each PHB */ + target = calgary_reg(bbar, tar_offset(dev->bus->number)); + val64 = be64_to_cpu(readq(target)); + + /* zero out all TAR bits under sw control */ + val64 &= ~TAR_SW_BITS; + table_phys = (u64)__pa(tbl->it_base); + + val64 |= table_phys; + + BUG_ON(specified_table_size > TCE_TABLE_SIZE_8M); + val64 |= (u64) specified_table_size; + + tbl->tar_val = cpu_to_be64(val64); + + writeq(tbl->tar_val, target); + readq(target); /* flush */ + + return 0; +} + +static void __init calgary_free_bus(struct pci_dev *dev) +{ + u64 val64; + struct iommu_table *tbl = pci_iommu(dev->bus); + void __iomem *target; + unsigned int bitmapsz; + + target = calgary_reg(tbl->bbar, tar_offset(dev->bus->number)); + val64 = be64_to_cpu(readq(target)); + val64 &= ~TAR_SW_BITS; + writeq(cpu_to_be64(val64), target); + readq(target); /* flush */ + + bitmapsz = tbl->it_size / BITS_PER_BYTE; + free_pages((unsigned long)tbl->it_map, get_order(bitmapsz)); + tbl->it_map = NULL; + + kfree(tbl); + + set_pci_iommu(dev->bus, NULL); + + /* Can't free bootmem allocated memory after system is up :-( */ + bus_info[dev->bus->number].tce_space = NULL; +} + +static void calgary_dump_error_regs(struct iommu_table *tbl) +{ + void __iomem *bbar = tbl->bbar; + void __iomem *target; + u32 csr, plssr; + + target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_CSR_OFFSET); + csr = be32_to_cpu(readl(target)); + + target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_PLSSR_OFFSET); + plssr = be32_to_cpu(readl(target)); + + /* If no error, the agent ID in the CSR is not valid */ + printk(KERN_EMERG "Calgary: DMA error on Calgary PHB 0x%x, " + "0x%08x@CSR 0x%08x@PLSSR\n", tbl->it_busno, csr, plssr); +} + +static void calioc2_dump_error_regs(struct iommu_table *tbl) +{ + void __iomem *bbar = tbl->bbar; + u32 csr, csmr, plssr, mck, rcstat; + void __iomem *target; + unsigned long phboff = phb_offset(tbl->it_busno); + unsigned long erroff; + u32 errregs[7]; + int i; + + /* dump CSR */ + target = calgary_reg(bbar, phboff | PHB_CSR_OFFSET); + csr = be32_to_cpu(readl(target)); + /* dump PLSSR */ + target = calgary_reg(bbar, phboff | PHB_PLSSR_OFFSET); + plssr = be32_to_cpu(readl(target)); + /* dump CSMR */ + target = calgary_reg(bbar, phboff | 0x290); + csmr = be32_to_cpu(readl(target)); + /* dump mck */ + target = calgary_reg(bbar, phboff | 0x800); + mck = be32_to_cpu(readl(target)); + + printk(KERN_EMERG "Calgary: DMA error on CalIOC2 PHB 0x%x\n", + tbl->it_busno); + + printk(KERN_EMERG "Calgary: 0x%08x@CSR 0x%08x@PLSSR 0x%08x@CSMR 0x%08x@MCK\n", + csr, plssr, csmr, mck); + + /* dump rest of error regs */ + printk(KERN_EMERG "Calgary: "); + for (i = 0; i < ARRAY_SIZE(errregs); i++) { + /* err regs are at 0x810 - 0x870 */ + erroff = (0x810 + (i * 0x10)); + target = calgary_reg(bbar, phboff | erroff); + errregs[i] = be32_to_cpu(readl(target)); + printk("0x%08x@0x%lx ", errregs[i], erroff); + } + printk("\n"); + + /* root complex status */ + target = calgary_reg(bbar, phboff | PHB_ROOT_COMPLEX_STATUS); + rcstat = be32_to_cpu(readl(target)); + printk(KERN_EMERG "Calgary: 0x%08x@0x%x\n", rcstat, + PHB_ROOT_COMPLEX_STATUS); +} + +static void calgary_watchdog(unsigned long data) +{ + struct pci_dev *dev = (struct pci_dev *)data; + struct iommu_table *tbl = pci_iommu(dev->bus); + void __iomem *bbar = tbl->bbar; + u32 val32; + void __iomem *target; + + target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_CSR_OFFSET); + val32 = be32_to_cpu(readl(target)); + + /* If no error, the agent ID in the CSR is not valid */ + if (val32 & CSR_AGENT_MASK) { + tbl->chip_ops->dump_error_regs(tbl); + + /* reset error */ + writel(0, target); + + /* Disable bus that caused the error */ + target = calgary_reg(bbar, phb_offset(tbl->it_busno) | + PHB_CONFIG_RW_OFFSET); + val32 = be32_to_cpu(readl(target)); + val32 |= PHB_SLOT_DISABLE; + writel(cpu_to_be32(val32), target); + readl(target); /* flush */ + } else { + /* Reset the timer */ + mod_timer(&tbl->watchdog_timer, jiffies + 2 * HZ); + } +} + +static void __init calgary_set_split_completion_timeout(void __iomem *bbar, + unsigned char busnum, unsigned long timeout) +{ + u64 val64; + void __iomem *target; + unsigned int phb_shift = ~0; /* silence gcc */ + u64 mask; + + switch (busno_to_phbid(busnum)) { + case 0: phb_shift = (63 - 19); + break; + case 1: phb_shift = (63 - 23); + break; + case 2: phb_shift = (63 - 27); + break; + case 3: phb_shift = (63 - 35); + break; + default: + BUG_ON(busno_to_phbid(busnum)); + } + + target = calgary_reg(bbar, CALGARY_CONFIG_REG); + val64 = be64_to_cpu(readq(target)); + + /* zero out this PHB's timer bits */ + mask = ~(0xFUL << phb_shift); + val64 &= mask; + val64 |= (timeout << phb_shift); + writeq(cpu_to_be64(val64), target); + readq(target); /* flush */ +} + +static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev) +{ + unsigned char busnum = dev->bus->number; + void __iomem *bbar = tbl->bbar; + void __iomem *target; + u32 val; + + /* + * CalIOC2 designers recommend setting bit 8 in 0xnDB0 to 1 + */ + target = calgary_reg(bbar, phb_offset(busnum) | PHB_SAVIOR_L2); + val = cpu_to_be32(readl(target)); + val |= 0x00800000; + writel(cpu_to_be32(val), target); +} + +static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev) +{ + unsigned char busnum = dev->bus->number; + + /* + * Give split completion a longer timeout on bus 1 for aic94xx + * http://bugzilla.kernel.org/show_bug.cgi?id=7180 + */ + if (is_calgary(dev->device) && (busnum == 1)) + calgary_set_split_completion_timeout(tbl->bbar, busnum, + CCR_2SEC_TIMEOUT); +} + +static void __init calgary_enable_translation(struct pci_dev *dev) +{ + u32 val32; + unsigned char busnum; + void __iomem *target; + void __iomem *bbar; + struct iommu_table *tbl; + + busnum = dev->bus->number; + tbl = pci_iommu(dev->bus); + bbar = tbl->bbar; + + /* enable TCE in PHB Config Register */ + target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET); + val32 = be32_to_cpu(readl(target)); + val32 |= PHB_TCE_ENABLE | PHB_DAC_DISABLE | PHB_MCSR_ENABLE; + + printk(KERN_INFO "Calgary: enabling translation on %s PHB %#x\n", + (dev->device == PCI_DEVICE_ID_IBM_CALGARY) ? + "Calgary" : "CalIOC2", busnum); + printk(KERN_INFO "Calgary: errant DMAs will now be prevented on this " + "bus.\n"); + + writel(cpu_to_be32(val32), target); + readl(target); /* flush */ + + init_timer(&tbl->watchdog_timer); + tbl->watchdog_timer.function = &calgary_watchdog; + tbl->watchdog_timer.data = (unsigned long)dev; + mod_timer(&tbl->watchdog_timer, jiffies); +} + +static void __init calgary_disable_translation(struct pci_dev *dev) +{ + u32 val32; + unsigned char busnum; + void __iomem *target; + void __iomem *bbar; + struct iommu_table *tbl; + + busnum = dev->bus->number; + tbl = pci_iommu(dev->bus); + bbar = tbl->bbar; + + /* disable TCE in PHB Config Register */ + target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET); + val32 = be32_to_cpu(readl(target)); + val32 &= ~(PHB_TCE_ENABLE | PHB_DAC_DISABLE | PHB_MCSR_ENABLE); + + printk(KERN_INFO "Calgary: disabling translation on PHB %#x!\n", busnum); + writel(cpu_to_be32(val32), target); + readl(target); /* flush */ + + del_timer_sync(&tbl->watchdog_timer); +} + +static void __init calgary_init_one_nontraslated(struct pci_dev *dev) +{ + pci_dev_get(dev); + set_pci_iommu(dev->bus, NULL); + + /* is the device behind a bridge? */ + if (dev->bus->parent) + dev->bus->parent->self = dev; + else + dev->bus->self = dev; +} + +static int __init calgary_init_one(struct pci_dev *dev) +{ + void __iomem *bbar; + struct iommu_table *tbl; + int ret; + + BUG_ON(dev->bus->number >= MAX_PHB_BUS_NUM); + + bbar = busno_to_bbar(dev->bus->number); + ret = calgary_setup_tar(dev, bbar); + if (ret) + goto done; + + pci_dev_get(dev); + + if (dev->bus->parent) { + if (dev->bus->parent->self) + printk(KERN_WARNING "Calgary: IEEEE, dev %p has " + "bus->parent->self!\n", dev); + dev->bus->parent->self = dev; + } else + dev->bus->self = dev; + + tbl = pci_iommu(dev->bus); + tbl->chip_ops->handle_quirks(tbl, dev); + + calgary_enable_translation(dev); + + return 0; + +done: + return ret; +} + +static int __init calgary_locate_bbars(void) +{ + int ret; + int rioidx, phb, bus; + void __iomem *bbar; + void __iomem *target; + unsigned long offset; + u8 start_bus, end_bus; + u32 val; + + ret = -ENODATA; + for (rioidx = 0; rioidx < rio_table_hdr->num_rio_dev; rioidx++) { + struct rio_detail *rio = rio_devs[rioidx]; + + if ((rio->type != COMPAT_CALGARY) && (rio->type != ALT_CALGARY)) + continue; + + /* map entire 1MB of Calgary config space */ + bbar = ioremap_nocache(rio->BBAR, 1024 * 1024); + if (!bbar) + goto error; + + for (phb = 0; phb < PHBS_PER_CALGARY; phb++) { + offset = phb_debug_offsets[phb] | PHB_DEBUG_STUFF_OFFSET; + target = calgary_reg(bbar, offset); + + val = be32_to_cpu(readl(target)); + + start_bus = (u8)((val & 0x00FF0000) >> 16); + end_bus = (u8)((val & 0x0000FF00) >> 8); + + if (end_bus) { + for (bus = start_bus; bus <= end_bus; bus++) { + bus_info[bus].bbar = bbar; + bus_info[bus].phbid = phb; + } + } else { + bus_info[start_bus].bbar = bbar; + bus_info[start_bus].phbid = phb; + } + } + } + + return 0; + +error: + /* scan bus_info and iounmap any bbars we previously ioremap'd */ + for (bus = 0; bus < ARRAY_SIZE(bus_info); bus++) + if (bus_info[bus].bbar) + iounmap(bus_info[bus].bbar); + + return ret; +} + +static int __init calgary_init(void) +{ + int ret; + struct pci_dev *dev = NULL; + void *tce_space; + + ret = calgary_locate_bbars(); + if (ret) + return ret; + + do { + dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev); + if (!dev) + break; + if (!is_cal_pci_dev(dev->device)) + continue; + if (!translate_phb(dev)) { + calgary_init_one_nontraslated(dev); + continue; + } + tce_space = bus_info[dev->bus->number].tce_space; + if (!tce_space && !translate_empty_slots) + continue; + + ret = calgary_init_one(dev); + if (ret) + goto error; + } while (1); + + return ret; + +error: + do { + dev = pci_get_device_reverse(PCI_VENDOR_ID_IBM, + PCI_ANY_ID, dev); + if (!dev) + break; + if (!is_cal_pci_dev(dev->device)) + continue; + if (!translate_phb(dev)) { + pci_dev_put(dev); + continue; + } + if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots) + continue; + + calgary_disable_translation(dev); + calgary_free_bus(dev); + pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */ + } while (1); + + return ret; +} + +static inline int __init determine_tce_table_size(u64 ram) +{ + int ret; + + if (specified_table_size != TCE_TABLE_SIZE_UNSPECIFIED) + return specified_table_size; + + /* + * Table sizes are from 0 to 7 (TCE_TABLE_SIZE_64K to + * TCE_TABLE_SIZE_8M). Table size 0 has 8K entries and each + * larger table size has twice as many entries, so shift the + * max ram address by 13 to divide by 8K and then look at the + * order of the result to choose between 0-7. + */ + ret = get_order(ram >> 13); + if (ret > TCE_TABLE_SIZE_8M) + ret = TCE_TABLE_SIZE_8M; + + return ret; +} + +static int __init build_detail_arrays(void) +{ + unsigned long ptr; + int i, scal_detail_size, rio_detail_size; + + if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){ + printk(KERN_WARNING + "Calgary: MAX_NUMNODES too low! Defined as %d, " + "but system has %d nodes.\n", + MAX_NUMNODES, rio_table_hdr->num_scal_dev); + return -ENODEV; + } + + switch (rio_table_hdr->version){ + case 2: + scal_detail_size = 11; + rio_detail_size = 13; + break; + case 3: + scal_detail_size = 12; + rio_detail_size = 15; + break; + default: + printk(KERN_WARNING + "Calgary: Invalid Rio Grande Table Version: %d\n", + rio_table_hdr->version); + return -EPROTO; + } + + ptr = ((unsigned long)rio_table_hdr) + 3; + for (i = 0; i < rio_table_hdr->num_scal_dev; + i++, ptr += scal_detail_size) + scal_devs[i] = (struct scal_detail *)ptr; + + for (i = 0; i < rio_table_hdr->num_rio_dev; + i++, ptr += rio_detail_size) + rio_devs[i] = (struct rio_detail *)ptr; + + return 0; +} + +static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev) +{ + int dev; + u32 val; + + if (pci_dev == PCI_DEVICE_ID_IBM_CALIOC2) { + /* + * FIXME: properly scan for devices accross the + * PCI-to-PCI bridge on every CalIOC2 port. + */ + return 1; + } + + for (dev = 1; dev < 8; dev++) { + val = read_pci_config(bus, dev, 0, 0); + if (val != 0xffffffff) + break; + } + return (val != 0xffffffff); +} + +void __init detect_calgary(void) +{ + int bus; + void *tbl; + int calgary_found = 0; + unsigned long ptr; + unsigned int offset, prev_offset; + int ret; + + /* + * if the user specified iommu=off or iommu=soft or we found + * another HW IOMMU already, bail out. + */ + if (swiotlb || no_iommu || iommu_detected) + return; + + if (!use_calgary) + return; + + if (!early_pci_allowed()) + return; + + printk(KERN_DEBUG "Calgary: detecting Calgary via BIOS EBDA area\n"); + + ptr = (unsigned long)phys_to_virt(get_bios_ebda()); + + rio_table_hdr = NULL; + prev_offset = 0; + offset = 0x180; + /* + * The next offset is stored in the 1st word. + * Only parse up until the offset increases: + */ + while (offset > prev_offset) { + /* The block id is stored in the 2nd word */ + if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){ + /* set the pointer past the offset & block id */ + rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4); + break; + } + prev_offset = offset; + offset = *((unsigned short *)(ptr + offset)); + } + if (!rio_table_hdr) { + printk(KERN_DEBUG "Calgary: Unable to locate Rio Grande table " + "in EBDA - bailing!\n"); + return; + } + + ret = build_detail_arrays(); + if (ret) { + printk(KERN_DEBUG "Calgary: build_detail_arrays ret %d\n", ret); + return; + } + + specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE); + + for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) { + struct calgary_bus_info *info = &bus_info[bus]; + unsigned short pci_device; + u32 val; + + val = read_pci_config(bus, 0, 0, 0); + pci_device = (val & 0xFFFF0000) >> 16; + + if (!is_cal_pci_dev(pci_device)) + continue; + + if (info->translation_disabled) + continue; + + if (calgary_bus_has_devices(bus, pci_device) || + translate_empty_slots) { + tbl = alloc_tce_table(); + if (!tbl) + goto cleanup; + info->tce_space = tbl; + calgary_found = 1; + } + } + + printk(KERN_DEBUG "Calgary: finished detection, Calgary %s\n", + calgary_found ? "found" : "not found"); + + if (calgary_found) { + iommu_detected = 1; + calgary_detected = 1; + printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected.\n"); + printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, " + "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size, + debugging ? "enabled" : "disabled"); + } + return; + +cleanup: + for (--bus; bus >= 0; --bus) { + struct calgary_bus_info *info = &bus_info[bus]; + + if (info->tce_space) + free_tce_table(info->tce_space); + } +} + +int __init calgary_iommu_init(void) +{ + int ret; + + if (no_iommu || swiotlb) + return -ENODEV; + + if (!calgary_detected) + return -ENODEV; + + /* ok, we're trying to use Calgary - let's roll */ + printk(KERN_INFO "PCI-DMA: Using Calgary IOMMU\n"); + + ret = calgary_init(); + if (ret) { + printk(KERN_ERR "PCI-DMA: Calgary init failed %d, " + "falling back to no_iommu\n", ret); + if (end_pfn > MAX_DMA32_PFN) + printk(KERN_ERR "WARNING more than 4GB of memory, " + "32bit PCI may malfunction.\n"); + return ret; + } + + force_iommu = 1; + bad_dma_address = 0x0; + dma_ops = &calgary_dma_ops; + + return 0; +} + +static int __init calgary_parse_options(char *p) +{ + unsigned int bridge; + size_t len; + char* endp; + + while (*p) { + if (!strncmp(p, "64k", 3)) + specified_table_size = TCE_TABLE_SIZE_64K; + else if (!strncmp(p, "128k", 4)) + specified_table_size = TCE_TABLE_SIZE_128K; + else if (!strncmp(p, "256k", 4)) + specified_table_size = TCE_TABLE_SIZE_256K; + else if (!strncmp(p, "512k", 4)) + specified_table_size = TCE_TABLE_SIZE_512K; + else if (!strncmp(p, "1M", 2)) + specified_table_size = TCE_TABLE_SIZE_1M; + else if (!strncmp(p, "2M", 2)) + specified_table_size = TCE_TABLE_SIZE_2M; + else if (!strncmp(p, "4M", 2)) + specified_table_size = TCE_TABLE_SIZE_4M; + else if (!strncmp(p, "8M", 2)) + specified_table_size = TCE_TABLE_SIZE_8M; + + len = strlen("translate_empty_slots"); + if (!strncmp(p, "translate_empty_slots", len)) + translate_empty_slots = 1; + + len = strlen("disable"); + if (!strncmp(p, "disable", len)) { + p += len; + if (*p == '=') + ++p; + if (*p == '\0') + break; + bridge = simple_strtol(p, &endp, 0); + if (p == endp) + break; + + if (bridge < MAX_PHB_BUS_NUM) { + printk(KERN_INFO "Calgary: disabling " + "translation for PHB %#x\n", bridge); + bus_info[bridge].translation_disabled = 1; + } + } + + p = strpbrk(p, ","); + if (!p) + break; + + p++; /* skip ',' */ + } + return 1; +} +__setup("calgary=", calgary_parse_options); + +static void __init calgary_fixup_one_tce_space(struct pci_dev *dev) +{ + struct iommu_table *tbl; + unsigned int npages; + int i; + + tbl = pci_iommu(dev->bus); + + for (i = 0; i < 4; i++) { + struct resource *r = &dev->resource[PCI_BRIDGE_RESOURCES + i]; + + /* Don't give out TCEs that map MEM resources */ + if (!(r->flags & IORESOURCE_MEM)) + continue; + + /* 0-based? we reserve the whole 1st MB anyway */ + if (!r->start) + continue; + + /* cover the whole region */ + npages = (r->end - r->start) >> PAGE_SHIFT; + npages++; + + iommu_range_reserve(tbl, r->start, npages); + } +} + +static int __init calgary_fixup_tce_spaces(void) +{ + struct pci_dev *dev = NULL; + void *tce_space; + + if (no_iommu || swiotlb || !calgary_detected) + return -ENODEV; + + printk(KERN_DEBUG "Calgary: fixing up tce spaces\n"); + + do { + dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev); + if (!dev) + break; + if (!is_cal_pci_dev(dev->device)) + continue; + if (!translate_phb(dev)) + continue; + + tce_space = bus_info[dev->bus->number].tce_space; + if (!tce_space) + continue; + + calgary_fixup_one_tce_space(dev); + + } while (1); + + return 0; +} + +/* + * We need to be call after pcibios_assign_resources (fs_initcall level) + * and before device_initcall. + */ +rootfs_initcall(calgary_fixup_tce_spaces); diff --git a/arch/x86/kernel/pci-dma_32.c b/arch/x86/kernel/pci-dma_32.c new file mode 100644 index 000000000000..048f09b62553 --- /dev/null +++ b/arch/x86/kernel/pci-dma_32.c @@ -0,0 +1,177 @@ +/* + * Dynamic DMA mapping support. + * + * On i386 there is no hardware dynamic DMA address translation, + * so consistent alloc/free are merely page allocation/freeing. + * The rest of the dynamic DMA mapping interface is implemented + * in asm/pci.h. + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <asm/io.h> + +struct dma_coherent_mem { + void *virt_base; + u32 device_base; + int size; + int flags; + unsigned long *bitmap; +}; + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp) +{ + void *ret; + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + int order = get_order(size); + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (mem) { + int page = bitmap_find_free_region(mem->bitmap, mem->size, + order); + if (page >= 0) { + *dma_handle = mem->device_base + (page << PAGE_SHIFT); + ret = mem->virt_base + (page << PAGE_SHIFT); + memset(ret, 0, size); + return ret; + } + if (mem->flags & DMA_MEMORY_EXCLUSIVE) + return NULL; + } + + if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + + ret = (void *)__get_free_pages(gfp, order); + + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_phys(ret); + } + return ret; +} +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + int order = get_order(size); + + if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) { + int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; + + bitmap_release_region(mem->bitmap, page, order); + } else + free_pages((unsigned long)vaddr, order); +} +EXPORT_SYMBOL(dma_free_coherent); + +int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags) +{ + void __iomem *mem_base = NULL; + int pages = size >> PAGE_SHIFT; + int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long); + + if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0) + goto out; + if (!size) + goto out; + if (dev->dma_mem) + goto out; + + /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */ + + mem_base = ioremap(bus_addr, size); + if (!mem_base) + goto out; + + dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL); + if (!dev->dma_mem) + goto out; + dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL); + if (!dev->dma_mem->bitmap) + goto free1_out; + + dev->dma_mem->virt_base = mem_base; + dev->dma_mem->device_base = device_addr; + dev->dma_mem->size = pages; + dev->dma_mem->flags = flags; + + if (flags & DMA_MEMORY_MAP) + return DMA_MEMORY_MAP; + + return DMA_MEMORY_IO; + + free1_out: + kfree(dev->dma_mem); + out: + if (mem_base) + iounmap(mem_base); + return 0; +} +EXPORT_SYMBOL(dma_declare_coherent_memory); + +void dma_release_declared_memory(struct device *dev) +{ + struct dma_coherent_mem *mem = dev->dma_mem; + + if(!mem) + return; + dev->dma_mem = NULL; + iounmap(mem->virt_base); + kfree(mem->bitmap); + kfree(mem); +} +EXPORT_SYMBOL(dma_release_declared_memory); + +void *dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size) +{ + struct dma_coherent_mem *mem = dev->dma_mem; + int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT; + int pos, err; + + if (!mem) + return ERR_PTR(-EINVAL); + + pos = (device_addr - mem->device_base) >> PAGE_SHIFT; + err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages)); + if (err != 0) + return ERR_PTR(err); + return mem->virt_base + (pos << PAGE_SHIFT); +} +EXPORT_SYMBOL(dma_mark_declared_memory_occupied); + +#ifdef CONFIG_PCI +/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ + +int forbid_dac; +EXPORT_SYMBOL(forbid_dac); + +static __devinit void via_no_dac(struct pci_dev *dev) +{ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { + printk(KERN_INFO "PCI: VIA PCI bridge detected. Disabling DAC.\n"); + forbid_dac = 1; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); + +static int check_iommu(char *s) +{ + if (!strcmp(s, "usedac")) { + forbid_dac = -1; + return 1; + } + return 0; +} +__setup("iommu=", check_iommu); +#endif diff --git a/arch/x86/kernel/pci-dma_64.c b/arch/x86/kernel/pci-dma_64.c new file mode 100644 index 000000000000..29711445c818 --- /dev/null +++ b/arch/x86/kernel/pci-dma_64.c @@ -0,0 +1,346 @@ +/* + * Dynamic DMA mapping support. + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/iommu.h> +#include <asm/calgary.h> + +int iommu_merge __read_mostly = 0; +EXPORT_SYMBOL(iommu_merge); + +dma_addr_t bad_dma_address __read_mostly; +EXPORT_SYMBOL(bad_dma_address); + +/* This tells the BIO block layer to assume merging. Default to off + because we cannot guarantee merging later. */ +int iommu_bio_merge __read_mostly = 0; +EXPORT_SYMBOL(iommu_bio_merge); + +static int iommu_sac_force __read_mostly = 0; + +int no_iommu __read_mostly; +#ifdef CONFIG_IOMMU_DEBUG +int panic_on_overflow __read_mostly = 1; +int force_iommu __read_mostly = 1; +#else +int panic_on_overflow __read_mostly = 0; +int force_iommu __read_mostly= 0; +#endif + +/* Set this to 1 if there is a HW IOMMU in the system */ +int iommu_detected __read_mostly = 0; + +/* Dummy device used for NULL arguments (normally ISA). Better would + be probably a smaller DMA mask, but this is bug-to-bug compatible + to i386. */ +struct device fallback_dev = { + .bus_id = "fallback device", + .coherent_dma_mask = DMA_32BIT_MASK, + .dma_mask = &fallback_dev.coherent_dma_mask, +}; + +/* Allocate DMA memory on node near device */ +noinline static void * +dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) +{ + struct page *page; + int node; +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + node = pcibus_to_node(to_pci_dev(dev)->bus); + else +#endif + node = numa_node_id(); + + if (node < first_node(node_online_map)) + node = first_node(node_online_map); + + page = alloc_pages_node(node, gfp, order); + return page ? page_address(page) : NULL; +} + +/* + * Allocate memory for a coherent mapping. + */ +void * +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t gfp) +{ + void *memory; + unsigned long dma_mask = 0; + u64 bus; + + if (!dev) + dev = &fallback_dev; + dma_mask = dev->coherent_dma_mask; + if (dma_mask == 0) + dma_mask = DMA_32BIT_MASK; + + /* Device not DMA able */ + if (dev->dma_mask == NULL) + return NULL; + + /* Don't invoke OOM killer */ + gfp |= __GFP_NORETRY; + + /* Kludge to make it bug-to-bug compatible with i386. i386 + uses the normal dma_mask for alloc_coherent. */ + dma_mask &= *dev->dma_mask; + + /* Why <=? Even when the mask is smaller than 4GB it is often + larger than 16MB and in this case we have a chance of + finding fitting memory in the next higher zone first. If + not retry with true GFP_DMA. -AK */ + if (dma_mask <= DMA_32BIT_MASK) + gfp |= GFP_DMA32; + + again: + memory = dma_alloc_pages(dev, gfp, get_order(size)); + if (memory == NULL) + return NULL; + + { + int high, mmu; + bus = virt_to_bus(memory); + high = (bus + size) >= dma_mask; + mmu = high; + if (force_iommu && !(gfp & GFP_DMA)) + mmu = 1; + else if (high) { + free_pages((unsigned long)memory, + get_order(size)); + + /* Don't use the 16MB ZONE_DMA unless absolutely + needed. It's better to use remapping first. */ + if (dma_mask < DMA_32BIT_MASK && !(gfp & GFP_DMA)) { + gfp = (gfp & ~GFP_DMA32) | GFP_DMA; + goto again; + } + + /* Let low level make its own zone decisions */ + gfp &= ~(GFP_DMA32|GFP_DMA); + + if (dma_ops->alloc_coherent) + return dma_ops->alloc_coherent(dev, size, + dma_handle, gfp); + return NULL; + } + + memset(memory, 0, size); + if (!mmu) { + *dma_handle = virt_to_bus(memory); + return memory; + } + } + + if (dma_ops->alloc_coherent) { + free_pages((unsigned long)memory, get_order(size)); + gfp &= ~(GFP_DMA|GFP_DMA32); + return dma_ops->alloc_coherent(dev, size, dma_handle, gfp); + } + + if (dma_ops->map_simple) { + *dma_handle = dma_ops->map_simple(dev, memory, + size, + PCI_DMA_BIDIRECTIONAL); + if (*dma_handle != bad_dma_address) + return memory; + } + + if (panic_on_overflow) + panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n",size); + free_pages((unsigned long)memory, get_order(size)); + return NULL; +} +EXPORT_SYMBOL(dma_alloc_coherent); + +/* + * Unmap coherent memory. + * The caller must ensure that the device has finished accessing the mapping. + */ +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t bus) +{ + if (dma_ops->unmap_single) + dma_ops->unmap_single(dev, bus, size, 0); + free_pages((unsigned long)vaddr, get_order(size)); +} +EXPORT_SYMBOL(dma_free_coherent); + +static int forbid_dac __read_mostly; + +int dma_supported(struct device *dev, u64 mask) +{ +#ifdef CONFIG_PCI + if (mask > 0xffffffff && forbid_dac > 0) { + + + + printk(KERN_INFO "PCI: Disallowing DAC for device %s\n", dev->bus_id); + return 0; + } +#endif + + if (dma_ops->dma_supported) + return dma_ops->dma_supported(dev, mask); + + /* Copied from i386. Doesn't make much sense, because it will + only work for pci_alloc_coherent. + The caller just has to use GFP_DMA in this case. */ + if (mask < DMA_24BIT_MASK) + return 0; + + /* Tell the device to use SAC when IOMMU force is on. This + allows the driver to use cheaper accesses in some cases. + + Problem with this is that if we overflow the IOMMU area and + return DAC as fallback address the device may not handle it + correctly. + + As a special case some controllers have a 39bit address + mode that is as efficient as 32bit (aic79xx). Don't force + SAC for these. Assume all masks <= 40 bits are of this + type. Normally this doesn't make any difference, but gives + more gentle handling of IOMMU overflow. */ + if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) { + printk(KERN_INFO "%s: Force SAC with mask %Lx\n", dev->bus_id,mask); + return 0; + } + + return 1; +} +EXPORT_SYMBOL(dma_supported); + +int dma_set_mask(struct device *dev, u64 mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + *dev->dma_mask = mask; + return 0; +} +EXPORT_SYMBOL(dma_set_mask); + +/* + * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter + * documentation. + */ +__init int iommu_setup(char *p) +{ + iommu_merge = 1; + + if (!p) + return -EINVAL; + + while (*p) { + if (!strncmp(p,"off",3)) + no_iommu = 1; + /* gart_parse_options has more force support */ + if (!strncmp(p,"force",5)) + force_iommu = 1; + if (!strncmp(p,"noforce",7)) { + iommu_merge = 0; + force_iommu = 0; + } + + if (!strncmp(p, "biomerge",8)) { + iommu_bio_merge = 4096; + iommu_merge = 1; + force_iommu = 1; + } + if (!strncmp(p, "panic",5)) + panic_on_overflow = 1; + if (!strncmp(p, "nopanic",7)) + panic_on_overflow = 0; + if (!strncmp(p, "merge",5)) { + iommu_merge = 1; + force_iommu = 1; + } + if (!strncmp(p, "nomerge",7)) + iommu_merge = 0; + if (!strncmp(p, "forcesac",8)) + iommu_sac_force = 1; + if (!strncmp(p, "allowdac", 8)) + forbid_dac = 0; + if (!strncmp(p, "nodac", 5)) + forbid_dac = -1; + +#ifdef CONFIG_SWIOTLB + if (!strncmp(p, "soft",4)) + swiotlb = 1; +#endif + +#ifdef CONFIG_IOMMU + gart_parse_options(p); +#endif + +#ifdef CONFIG_CALGARY_IOMMU + if (!strncmp(p, "calgary", 7)) + use_calgary = 1; +#endif /* CONFIG_CALGARY_IOMMU */ + + p += strcspn(p, ","); + if (*p == ',') + ++p; + } + return 0; +} +early_param("iommu", iommu_setup); + +void __init pci_iommu_alloc(void) +{ + /* + * The order of these functions is important for + * fall-back/fail-over reasons + */ +#ifdef CONFIG_IOMMU + iommu_hole_init(); +#endif + +#ifdef CONFIG_CALGARY_IOMMU + detect_calgary(); +#endif + +#ifdef CONFIG_SWIOTLB + pci_swiotlb_init(); +#endif +} + +static int __init pci_iommu_init(void) +{ +#ifdef CONFIG_CALGARY_IOMMU + calgary_iommu_init(); +#endif + +#ifdef CONFIG_IOMMU + gart_iommu_init(); +#endif + + no_iommu_init(); + return 0; +} + +void pci_iommu_shutdown(void) +{ + gart_iommu_shutdown(); +} + +#ifdef CONFIG_PCI +/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ + +static __devinit void via_no_dac(struct pci_dev *dev) +{ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { + printk(KERN_INFO "PCI: VIA PCI bridge detected. Disabling DAC.\n"); + forbid_dac = 1; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); +#endif +/* Must execute after PCI subsystem */ +fs_initcall(pci_iommu_init); diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c new file mode 100644 index 000000000000..4918c575d582 --- /dev/null +++ b/arch/x86/kernel/pci-gart_64.c @@ -0,0 +1,740 @@ +/* + * Dynamic DMA mapping support for AMD Hammer. + * + * Use the integrated AGP GART in the Hammer northbridge as an IOMMU for PCI. + * This allows to use PCI devices that only support 32bit addresses on systems + * with more than 4GB. + * + * See Documentation/DMA-mapping.txt for the interface specification. + * + * Copyright 2002 Andi Kleen, SuSE Labs. + */ + +#include <linux/types.h> +#include <linux/ctype.h> +#include <linux/agp_backend.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/spinlock.h> +#include <linux/pci.h> +#include <linux/module.h> +#include <linux/topology.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/kdebug.h> +#include <asm/atomic.h> +#include <asm/io.h> +#include <asm/mtrr.h> +#include <asm/pgtable.h> +#include <asm/proto.h> +#include <asm/iommu.h> +#include <asm/cacheflush.h> +#include <asm/swiotlb.h> +#include <asm/dma.h> +#include <asm/k8.h> + +unsigned long iommu_bus_base; /* GART remapping area (physical) */ +static unsigned long iommu_size; /* size of remapping area bytes */ +static unsigned long iommu_pages; /* .. and in pages */ + +u32 *iommu_gatt_base; /* Remapping table */ + +/* If this is disabled the IOMMU will use an optimized flushing strategy + of only flushing when an mapping is reused. With it true the GART is flushed + for every mapping. Problem is that doing the lazy flush seems to trigger + bugs with some popular PCI cards, in particular 3ware (but has been also + also seen with Qlogic at least). */ +int iommu_fullflush = 1; + +/* Allocation bitmap for the remapping area */ +static DEFINE_SPINLOCK(iommu_bitmap_lock); +static unsigned long *iommu_gart_bitmap; /* guarded by iommu_bitmap_lock */ + +static u32 gart_unmapped_entry; + +#define GPTE_VALID 1 +#define GPTE_COHERENT 2 +#define GPTE_ENCODE(x) \ + (((x) & 0xfffff000) | (((x) >> 32) << 4) | GPTE_VALID | GPTE_COHERENT) +#define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28)) + +#define to_pages(addr,size) \ + (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT) + +#define EMERGENCY_PAGES 32 /* = 128KB */ + +#ifdef CONFIG_AGP +#define AGPEXTERN extern +#else +#define AGPEXTERN +#endif + +/* backdoor interface to AGP driver */ +AGPEXTERN int agp_memory_reserved; +AGPEXTERN __u32 *agp_gatt_table; + +static unsigned long next_bit; /* protected by iommu_bitmap_lock */ +static int need_flush; /* global flush state. set for each gart wrap */ + +static unsigned long alloc_iommu(int size) +{ + unsigned long offset, flags; + + spin_lock_irqsave(&iommu_bitmap_lock, flags); + offset = find_next_zero_string(iommu_gart_bitmap,next_bit,iommu_pages,size); + if (offset == -1) { + need_flush = 1; + offset = find_next_zero_string(iommu_gart_bitmap,0,iommu_pages,size); + } + if (offset != -1) { + set_bit_string(iommu_gart_bitmap, offset, size); + next_bit = offset+size; + if (next_bit >= iommu_pages) { + next_bit = 0; + need_flush = 1; + } + } + if (iommu_fullflush) + need_flush = 1; + spin_unlock_irqrestore(&iommu_bitmap_lock, flags); + return offset; +} + +static void free_iommu(unsigned long offset, int size) +{ + unsigned long flags; + spin_lock_irqsave(&iommu_bitmap_lock, flags); + __clear_bit_string(iommu_gart_bitmap, offset, size); + spin_unlock_irqrestore(&iommu_bitmap_lock, flags); +} + +/* + * Use global flush state to avoid races with multiple flushers. + */ +static void flush_gart(void) +{ + unsigned long flags; + spin_lock_irqsave(&iommu_bitmap_lock, flags); + if (need_flush) { + k8_flush_garts(); + need_flush = 0; + } + spin_unlock_irqrestore(&iommu_bitmap_lock, flags); +} + +#ifdef CONFIG_IOMMU_LEAK + +#define SET_LEAK(x) if (iommu_leak_tab) \ + iommu_leak_tab[x] = __builtin_return_address(0); +#define CLEAR_LEAK(x) if (iommu_leak_tab) \ + iommu_leak_tab[x] = NULL; + +/* Debugging aid for drivers that don't free their IOMMU tables */ +static void **iommu_leak_tab; +static int leak_trace; +int iommu_leak_pages = 20; +void dump_leak(void) +{ + int i; + static int dump; + if (dump || !iommu_leak_tab) return; + dump = 1; + show_stack(NULL,NULL); + /* Very crude. dump some from the end of the table too */ + printk("Dumping %d pages from end of IOMMU:\n", iommu_leak_pages); + for (i = 0; i < iommu_leak_pages; i+=2) { + printk("%lu: ", iommu_pages-i); + printk_address((unsigned long) iommu_leak_tab[iommu_pages-i]); + printk("%c", (i+1)%2 == 0 ? '\n' : ' '); + } + printk("\n"); +} +#else +#define SET_LEAK(x) +#define CLEAR_LEAK(x) +#endif + +static void iommu_full(struct device *dev, size_t size, int dir) +{ + /* + * Ran out of IOMMU space for this operation. This is very bad. + * Unfortunately the drivers cannot handle this operation properly. + * Return some non mapped prereserved space in the aperture and + * let the Northbridge deal with it. This will result in garbage + * in the IO operation. When the size exceeds the prereserved space + * memory corruption will occur or random memory will be DMAed + * out. Hopefully no network devices use single mappings that big. + */ + + printk(KERN_ERR + "PCI-DMA: Out of IOMMU space for %lu bytes at device %s\n", + size, dev->bus_id); + + if (size > PAGE_SIZE*EMERGENCY_PAGES) { + if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL) + panic("PCI-DMA: Memory would be corrupted\n"); + if (dir == PCI_DMA_TODEVICE || dir == PCI_DMA_BIDIRECTIONAL) + panic(KERN_ERR "PCI-DMA: Random memory would be DMAed\n"); + } + +#ifdef CONFIG_IOMMU_LEAK + dump_leak(); +#endif +} + +static inline int need_iommu(struct device *dev, unsigned long addr, size_t size) +{ + u64 mask = *dev->dma_mask; + int high = addr + size > mask; + int mmu = high; + if (force_iommu) + mmu = 1; + return mmu; +} + +static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t size) +{ + u64 mask = *dev->dma_mask; + int high = addr + size > mask; + int mmu = high; + return mmu; +} + +/* Map a single continuous physical area into the IOMMU. + * Caller needs to check if the iommu is needed and flush. + */ +static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem, + size_t size, int dir) +{ + unsigned long npages = to_pages(phys_mem, size); + unsigned long iommu_page = alloc_iommu(npages); + int i; + if (iommu_page == -1) { + if (!nonforced_iommu(dev, phys_mem, size)) + return phys_mem; + if (panic_on_overflow) + panic("dma_map_area overflow %lu bytes\n", size); + iommu_full(dev, size, dir); + return bad_dma_address; + } + + for (i = 0; i < npages; i++) { + iommu_gatt_base[iommu_page + i] = GPTE_ENCODE(phys_mem); + SET_LEAK(iommu_page + i); + phys_mem += PAGE_SIZE; + } + return iommu_bus_base + iommu_page*PAGE_SIZE + (phys_mem & ~PAGE_MASK); +} + +static dma_addr_t gart_map_simple(struct device *dev, char *buf, + size_t size, int dir) +{ + dma_addr_t map = dma_map_area(dev, virt_to_bus(buf), size, dir); + flush_gart(); + return map; +} + +/* Map a single area into the IOMMU */ +static dma_addr_t gart_map_single(struct device *dev, void *addr, size_t size, int dir) +{ + unsigned long phys_mem, bus; + + if (!dev) + dev = &fallback_dev; + + phys_mem = virt_to_phys(addr); + if (!need_iommu(dev, phys_mem, size)) + return phys_mem; + + bus = gart_map_simple(dev, addr, size, dir); + return bus; +} + +/* + * Free a DMA mapping. + */ +static void gart_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, int direction) +{ + unsigned long iommu_page; + int npages; + int i; + + if (dma_addr < iommu_bus_base + EMERGENCY_PAGES*PAGE_SIZE || + dma_addr >= iommu_bus_base + iommu_size) + return; + iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT; + npages = to_pages(dma_addr, size); + for (i = 0; i < npages; i++) { + iommu_gatt_base[iommu_page + i] = gart_unmapped_entry; + CLEAR_LEAK(iommu_page + i); + } + free_iommu(iommu_page, npages); +} + +/* + * Wrapper for pci_unmap_single working with scatterlists. + */ +static void gart_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, int dir) +{ + int i; + + for (i = 0; i < nents; i++) { + struct scatterlist *s = &sg[i]; + if (!s->dma_length || !s->length) + break; + gart_unmap_single(dev, s->dma_address, s->dma_length, dir); + } +} + +/* Fallback for dma_map_sg in case of overflow */ +static int dma_map_sg_nonforce(struct device *dev, struct scatterlist *sg, + int nents, int dir) +{ + int i; + +#ifdef CONFIG_IOMMU_DEBUG + printk(KERN_DEBUG "dma_map_sg overflow\n"); +#endif + + for (i = 0; i < nents; i++ ) { + struct scatterlist *s = &sg[i]; + unsigned long addr = page_to_phys(s->page) + s->offset; + if (nonforced_iommu(dev, addr, s->length)) { + addr = dma_map_area(dev, addr, s->length, dir); + if (addr == bad_dma_address) { + if (i > 0) + gart_unmap_sg(dev, sg, i, dir); + nents = 0; + sg[0].dma_length = 0; + break; + } + } + s->dma_address = addr; + s->dma_length = s->length; + } + flush_gart(); + return nents; +} + +/* Map multiple scatterlist entries continuous into the first. */ +static int __dma_map_cont(struct scatterlist *sg, int start, int stopat, + struct scatterlist *sout, unsigned long pages) +{ + unsigned long iommu_start = alloc_iommu(pages); + unsigned long iommu_page = iommu_start; + int i; + + if (iommu_start == -1) + return -1; + + for (i = start; i < stopat; i++) { + struct scatterlist *s = &sg[i]; + unsigned long pages, addr; + unsigned long phys_addr = s->dma_address; + + BUG_ON(i > start && s->offset); + if (i == start) { + *sout = *s; + sout->dma_address = iommu_bus_base; + sout->dma_address += iommu_page*PAGE_SIZE + s->offset; + sout->dma_length = s->length; + } else { + sout->dma_length += s->length; + } + + addr = phys_addr; + pages = to_pages(s->offset, s->length); + while (pages--) { + iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr); + SET_LEAK(iommu_page); + addr += PAGE_SIZE; + iommu_page++; + } + } + BUG_ON(iommu_page - iommu_start != pages); + return 0; +} + +static inline int dma_map_cont(struct scatterlist *sg, int start, int stopat, + struct scatterlist *sout, + unsigned long pages, int need) +{ + if (!need) { + BUG_ON(stopat - start != 1); + *sout = sg[start]; + sout->dma_length = sg[start].length; + return 0; + } + return __dma_map_cont(sg, start, stopat, sout, pages); +} + +/* + * DMA map all entries in a scatterlist. + * Merge chunks that have page aligned sizes into a continuous mapping. + */ +int gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir) +{ + int i; + int out; + int start; + unsigned long pages = 0; + int need = 0, nextneed; + + if (nents == 0) + return 0; + + if (!dev) + dev = &fallback_dev; + + out = 0; + start = 0; + for (i = 0; i < nents; i++) { + struct scatterlist *s = &sg[i]; + dma_addr_t addr = page_to_phys(s->page) + s->offset; + s->dma_address = addr; + BUG_ON(s->length == 0); + + nextneed = need_iommu(dev, addr, s->length); + + /* Handle the previous not yet processed entries */ + if (i > start) { + struct scatterlist *ps = &sg[i-1]; + /* Can only merge when the last chunk ends on a page + boundary and the new one doesn't have an offset. */ + if (!iommu_merge || !nextneed || !need || s->offset || + (ps->offset + ps->length) % PAGE_SIZE) { + if (dma_map_cont(sg, start, i, sg+out, pages, + need) < 0) + goto error; + out++; + pages = 0; + start = i; + } + } + + need = nextneed; + pages += to_pages(s->offset, s->length); + } + if (dma_map_cont(sg, start, i, sg+out, pages, need) < 0) + goto error; + out++; + flush_gart(); + if (out < nents) + sg[out].dma_length = 0; + return out; + +error: + flush_gart(); + gart_unmap_sg(dev, sg, nents, dir); + /* When it was forced or merged try again in a dumb way */ + if (force_iommu || iommu_merge) { + out = dma_map_sg_nonforce(dev, sg, nents, dir); + if (out > 0) + return out; + } + if (panic_on_overflow) + panic("dma_map_sg: overflow on %lu pages\n", pages); + iommu_full(dev, pages << PAGE_SHIFT, dir); + for (i = 0; i < nents; i++) + sg[i].dma_address = bad_dma_address; + return 0; +} + +static int no_agp; + +static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size) +{ + unsigned long a; + if (!iommu_size) { + iommu_size = aper_size; + if (!no_agp) + iommu_size /= 2; + } + + a = aper + iommu_size; + iommu_size -= round_up(a, LARGE_PAGE_SIZE) - a; + + if (iommu_size < 64*1024*1024) + printk(KERN_WARNING + "PCI-DMA: Warning: Small IOMMU %luMB. Consider increasing the AGP aperture in BIOS\n",iommu_size>>20); + + return iommu_size; +} + +static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) +{ + unsigned aper_size = 0, aper_base_32; + u64 aper_base; + unsigned aper_order; + + pci_read_config_dword(dev, 0x94, &aper_base_32); + pci_read_config_dword(dev, 0x90, &aper_order); + aper_order = (aper_order >> 1) & 7; + + aper_base = aper_base_32 & 0x7fff; + aper_base <<= 25; + + aper_size = (32 * 1024 * 1024) << aper_order; + if (aper_base + aper_size > 0x100000000UL || !aper_size) + aper_base = 0; + + *size = aper_size; + return aper_base; +} + +/* + * Private Northbridge GATT initialization in case we cannot use the + * AGP driver for some reason. + */ +static __init int init_k8_gatt(struct agp_kern_info *info) +{ + struct pci_dev *dev; + void *gatt; + unsigned aper_base, new_aper_base; + unsigned aper_size, gatt_size, new_aper_size; + int i; + + printk(KERN_INFO "PCI-DMA: Disabling AGP.\n"); + aper_size = aper_base = info->aper_size = 0; + dev = NULL; + for (i = 0; i < num_k8_northbridges; i++) { + dev = k8_northbridges[i]; + new_aper_base = read_aperture(dev, &new_aper_size); + if (!new_aper_base) + goto nommu; + + if (!aper_base) { + aper_size = new_aper_size; + aper_base = new_aper_base; + } + if (aper_size != new_aper_size || aper_base != new_aper_base) + goto nommu; + } + if (!aper_base) + goto nommu; + info->aper_base = aper_base; + info->aper_size = aper_size>>20; + + gatt_size = (aper_size >> PAGE_SHIFT) * sizeof(u32); + gatt = (void *)__get_free_pages(GFP_KERNEL, get_order(gatt_size)); + if (!gatt) + panic("Cannot allocate GATT table"); + if (change_page_attr_addr((unsigned long)gatt, gatt_size >> PAGE_SHIFT, PAGE_KERNEL_NOCACHE)) + panic("Could not set GART PTEs to uncacheable pages"); + global_flush_tlb(); + + memset(gatt, 0, gatt_size); + agp_gatt_table = gatt; + + for (i = 0; i < num_k8_northbridges; i++) { + u32 ctl; + u32 gatt_reg; + + dev = k8_northbridges[i]; + gatt_reg = __pa(gatt) >> 12; + gatt_reg <<= 4; + pci_write_config_dword(dev, 0x98, gatt_reg); + pci_read_config_dword(dev, 0x90, &ctl); + + ctl |= 1; + ctl &= ~((1<<4) | (1<<5)); + + pci_write_config_dword(dev, 0x90, ctl); + } + flush_gart(); + + printk("PCI-DMA: aperture base @ %x size %u KB\n",aper_base, aper_size>>10); + return 0; + + nommu: + /* Should not happen anymore */ + printk(KERN_ERR "PCI-DMA: More than 4GB of RAM and no IOMMU\n" + KERN_ERR "PCI-DMA: 32bit PCI IO may malfunction.\n"); + return -1; +} + +extern int agp_amd64_init(void); + +static const struct dma_mapping_ops gart_dma_ops = { + .mapping_error = NULL, + .map_single = gart_map_single, + .map_simple = gart_map_simple, + .unmap_single = gart_unmap_single, + .sync_single_for_cpu = NULL, + .sync_single_for_device = NULL, + .sync_single_range_for_cpu = NULL, + .sync_single_range_for_device = NULL, + .sync_sg_for_cpu = NULL, + .sync_sg_for_device = NULL, + .map_sg = gart_map_sg, + .unmap_sg = gart_unmap_sg, +}; + +void gart_iommu_shutdown(void) +{ + struct pci_dev *dev; + int i; + + if (no_agp && (dma_ops != &gart_dma_ops)) + return; + + for (i = 0; i < num_k8_northbridges; i++) { + u32 ctl; + + dev = k8_northbridges[i]; + pci_read_config_dword(dev, 0x90, &ctl); + + ctl &= ~1; + + pci_write_config_dword(dev, 0x90, ctl); + } +} + +void __init gart_iommu_init(void) +{ + struct agp_kern_info info; + unsigned long aper_size; + unsigned long iommu_start; + unsigned long scratch; + long i; + + if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) { + printk(KERN_INFO "PCI-GART: No AMD northbridge found.\n"); + return; + } + +#ifndef CONFIG_AGP_AMD64 + no_agp = 1; +#else + /* Makefile puts PCI initialization via subsys_initcall first. */ + /* Add other K8 AGP bridge drivers here */ + no_agp = no_agp || + (agp_amd64_init() < 0) || + (agp_copy_info(agp_bridge, &info) < 0); +#endif + + if (swiotlb) + return; + + /* Did we detect a different HW IOMMU? */ + if (iommu_detected && !iommu_aperture) + return; + + if (no_iommu || + (!force_iommu && end_pfn <= MAX_DMA32_PFN) || + !iommu_aperture || + (no_agp && init_k8_gatt(&info) < 0)) { + if (end_pfn > MAX_DMA32_PFN) { + printk(KERN_ERR "WARNING more than 4GB of memory " + "but GART IOMMU not available.\n" + KERN_ERR "WARNING 32bit PCI may malfunction.\n"); + } + return; + } + + printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n"); + aper_size = info.aper_size * 1024 * 1024; + iommu_size = check_iommu_size(info.aper_base, aper_size); + iommu_pages = iommu_size >> PAGE_SHIFT; + + iommu_gart_bitmap = (void*)__get_free_pages(GFP_KERNEL, + get_order(iommu_pages/8)); + if (!iommu_gart_bitmap) + panic("Cannot allocate iommu bitmap\n"); + memset(iommu_gart_bitmap, 0, iommu_pages/8); + +#ifdef CONFIG_IOMMU_LEAK + if (leak_trace) { + iommu_leak_tab = (void *)__get_free_pages(GFP_KERNEL, + get_order(iommu_pages*sizeof(void *))); + if (iommu_leak_tab) + memset(iommu_leak_tab, 0, iommu_pages * 8); + else + printk("PCI-DMA: Cannot allocate leak trace area\n"); + } +#endif + + /* + * Out of IOMMU space handling. + * Reserve some invalid pages at the beginning of the GART. + */ + set_bit_string(iommu_gart_bitmap, 0, EMERGENCY_PAGES); + + agp_memory_reserved = iommu_size; + printk(KERN_INFO + "PCI-DMA: Reserving %luMB of IOMMU area in the AGP aperture\n", + iommu_size>>20); + + iommu_start = aper_size - iommu_size; + iommu_bus_base = info.aper_base + iommu_start; + bad_dma_address = iommu_bus_base; + iommu_gatt_base = agp_gatt_table + (iommu_start>>PAGE_SHIFT); + + /* + * Unmap the IOMMU part of the GART. The alias of the page is + * always mapped with cache enabled and there is no full cache + * coherency across the GART remapping. The unmapping avoids + * automatic prefetches from the CPU allocating cache lines in + * there. All CPU accesses are done via the direct mapping to + * the backing memory. The GART address is only used by PCI + * devices. + */ + clear_kernel_mapping((unsigned long)__va(iommu_bus_base), iommu_size); + + /* + * Try to workaround a bug (thanks to BenH) + * Set unmapped entries to a scratch page instead of 0. + * Any prefetches that hit unmapped entries won't get an bus abort + * then. + */ + scratch = get_zeroed_page(GFP_KERNEL); + if (!scratch) + panic("Cannot allocate iommu scratch page"); + gart_unmapped_entry = GPTE_ENCODE(__pa(scratch)); + for (i = EMERGENCY_PAGES; i < iommu_pages; i++) + iommu_gatt_base[i] = gart_unmapped_entry; + + flush_gart(); + dma_ops = &gart_dma_ops; +} + +void __init gart_parse_options(char *p) +{ + int arg; + +#ifdef CONFIG_IOMMU_LEAK + if (!strncmp(p,"leak",4)) { + leak_trace = 1; + p += 4; + if (*p == '=') ++p; + if (isdigit(*p) && get_option(&p, &arg)) + iommu_leak_pages = arg; + } +#endif + if (isdigit(*p) && get_option(&p, &arg)) + iommu_size = arg; + if (!strncmp(p, "fullflush",8)) + iommu_fullflush = 1; + if (!strncmp(p, "nofullflush",11)) + iommu_fullflush = 0; + if (!strncmp(p,"noagp",5)) + no_agp = 1; + if (!strncmp(p, "noaperture",10)) + fix_aperture = 0; + /* duplicated from pci-dma.c */ + if (!strncmp(p,"force",5)) + iommu_aperture_allowed = 1; + if (!strncmp(p,"allowed",7)) + iommu_aperture_allowed = 1; + if (!strncmp(p, "memaper", 7)) { + fallback_aper_force = 1; + p += 7; + if (*p == '=') { + ++p; + if (get_option(&p, &arg)) + fallback_aper_order = arg; + } + } +} diff --git a/arch/x86/kernel/pci-nommu_64.c b/arch/x86/kernel/pci-nommu_64.c new file mode 100644 index 000000000000..2a34c6c025a9 --- /dev/null +++ b/arch/x86/kernel/pci-nommu_64.c @@ -0,0 +1,97 @@ +/* Fallback functions when the main IOMMU code is not compiled in. This + code is roughly equivalent to i386. */ +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> + +#include <asm/iommu.h> +#include <asm/processor.h> +#include <asm/dma.h> + +static int +check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size) +{ + if (hwdev && bus + size > *hwdev->dma_mask) { + if (*hwdev->dma_mask >= DMA_32BIT_MASK) + printk(KERN_ERR + "nommu_%s: overflow %Lx+%zu of device mask %Lx\n", + name, (long long)bus, size, + (long long)*hwdev->dma_mask); + return 0; + } + return 1; +} + +static dma_addr_t +nommu_map_single(struct device *hwdev, void *ptr, size_t size, + int direction) +{ + dma_addr_t bus = virt_to_bus(ptr); + if (!check_addr("map_single", hwdev, bus, size)) + return bad_dma_address; + return bus; +} + +static void nommu_unmap_single(struct device *dev, dma_addr_t addr,size_t size, + int direction) +{ +} + +/* Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scatter-gather version of the + * above pci_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are + * the same here. + */ +static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg, + int nents, int direction) +{ + int i; + + for (i = 0; i < nents; i++ ) { + struct scatterlist *s = &sg[i]; + BUG_ON(!s->page); + s->dma_address = virt_to_bus(page_address(s->page) +s->offset); + if (!check_addr("map_sg", hwdev, s->dma_address, s->length)) + return 0; + s->dma_length = s->length; + } + return nents; +} + +/* Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +static void nommu_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, int dir) +{ +} + +const struct dma_mapping_ops nommu_dma_ops = { + .map_single = nommu_map_single, + .unmap_single = nommu_unmap_single, + .map_sg = nommu_map_sg, + .unmap_sg = nommu_unmap_sg, + .is_phys = 1, +}; + +void __init no_iommu_init(void) +{ + if (dma_ops) + return; + + force_iommu = 0; /* no HW IOMMU */ + dma_ops = &nommu_dma_ops; +} diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c new file mode 100644 index 000000000000..b2f405ea7c85 --- /dev/null +++ b/arch/x86/kernel/pci-swiotlb_64.c @@ -0,0 +1,44 @@ +/* Glue code to lib/swiotlb.c */ + +#include <linux/pci.h> +#include <linux/cache.h> +#include <linux/module.h> +#include <linux/dma-mapping.h> + +#include <asm/iommu.h> +#include <asm/swiotlb.h> +#include <asm/dma.h> + +int swiotlb __read_mostly; +EXPORT_SYMBOL(swiotlb); + +const struct dma_mapping_ops swiotlb_dma_ops = { + .mapping_error = swiotlb_dma_mapping_error, + .alloc_coherent = swiotlb_alloc_coherent, + .free_coherent = swiotlb_free_coherent, + .map_single = swiotlb_map_single, + .unmap_single = swiotlb_unmap_single, + .sync_single_for_cpu = swiotlb_sync_single_for_cpu, + .sync_single_for_device = swiotlb_sync_single_for_device, + .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, + .sync_single_range_for_device = swiotlb_sync_single_range_for_device, + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, + .sync_sg_for_device = swiotlb_sync_sg_for_device, + .map_sg = swiotlb_map_sg, + .unmap_sg = swiotlb_unmap_sg, + .dma_supported = NULL, +}; + +void __init pci_swiotlb_init(void) +{ + /* don't initialize swiotlb if iommu=off (no_iommu=1) */ + if (!iommu_detected && !no_iommu && end_pfn > MAX_DMA32_PFN) + swiotlb = 1; + if (swiotlb_force) + swiotlb = 1; + if (swiotlb) { + printk(KERN_INFO "PCI-DMA: Using software bounce buffering for IO (SWIOTLB)\n"); + swiotlb_init(); + dma_ops = &swiotlb_dma_ops; + } +} diff --git a/arch/x86/kernel/pcspeaker.c b/arch/x86/kernel/pcspeaker.c new file mode 100644 index 000000000000..bc1f2d3ea277 --- /dev/null +++ b/arch/x86/kernel/pcspeaker.c @@ -0,0 +1,20 @@ +#include <linux/platform_device.h> +#include <linux/errno.h> +#include <linux/init.h> + +static __init int add_pcspkr(void) +{ + struct platform_device *pd; + int ret; + + pd = platform_device_alloc("pcspkr", -1); + if (!pd) + return -ENOMEM; + + ret = platform_device_add(pd); + if (ret) + platform_device_put(pd); + + return ret; +} +device_initcall(add_pcspkr); diff --git a/arch/x86/kernel/pmtimer_64.c b/arch/x86/kernel/pmtimer_64.c new file mode 100644 index 000000000000..ae8f91214f15 --- /dev/null +++ b/arch/x86/kernel/pmtimer_64.c @@ -0,0 +1,69 @@ +/* Ported over from i386 by AK, original copyright was: + * + * (C) Dominik Brodowski <linux@brodo.de> 2003 + * + * Driver to use the Power Management Timer (PMTMR) available in some + * southbridges as primary timing source for the Linux kernel. + * + * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c, + * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4. + * + * This file is licensed under the GPL v2. + * + * Dropped all the hardware bug workarounds for now. Hopefully they + * are not needed on 64bit chipsets. + */ + +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/init.h> +#include <linux/cpumask.h> +#include <asm/io.h> +#include <asm/proto.h> +#include <asm/msr.h> +#include <asm/vsyscall.h> + +#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */ + +static inline u32 cyc2us(u32 cycles) +{ + /* The Power Management Timer ticks at 3.579545 ticks per microsecond. + * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%] + * + * Even with HZ = 100, delta is at maximum 35796 ticks, so it can + * easily be multiplied with 286 (=0x11E) without having to fear + * u32 overflows. + */ + cycles *= 286; + return (cycles >> 10); +} + +static unsigned pmtimer_wait_tick(void) +{ + u32 a, b; + for (a = b = inl(pmtmr_ioport) & ACPI_PM_MASK; + a == b; + b = inl(pmtmr_ioport) & ACPI_PM_MASK) + cpu_relax(); + return b; +} + +/* note: wait time is rounded up to one tick */ +void pmtimer_wait(unsigned us) +{ + u32 a, b; + a = pmtimer_wait_tick(); + do { + b = inl(pmtmr_ioport); + cpu_relax(); + } while (cyc2us(b - a) < us); +} + +static int __init nopmtimer_setup(char *s) +{ + pmtmr_ioport = 0; + return 1; +} + +__setup("nopmtimer", nopmtimer_setup); diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c new file mode 100644 index 000000000000..84664710b784 --- /dev/null +++ b/arch/x86/kernel/process_32.c @@ -0,0 +1,951 @@ +/* + * linux/arch/i386/kernel/process.c + * + * Copyright (C) 1995 Linus Torvalds + * + * Pentium III FXSR, SSE support + * Gareth Hughes <gareth@valinux.com>, May 2000 + */ + +/* + * This file handles the architecture-dependent parts of process handling.. + */ + +#include <stdarg.h> + +#include <linux/cpu.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/elfcore.h> +#include <linux/smp.h> +#include <linux/stddef.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/user.h> +#include <linux/a.out.h> +#include <linux/interrupt.h> +#include <linux/utsname.h> +#include <linux/delay.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/mc146818rtc.h> +#include <linux/module.h> +#include <linux/kallsyms.h> +#include <linux/ptrace.h> +#include <linux/random.h> +#include <linux/personality.h> +#include <linux/tick.h> +#include <linux/percpu.h> + +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/ldt.h> +#include <asm/processor.h> +#include <asm/i387.h> +#include <asm/desc.h> +#include <asm/vm86.h> +#ifdef CONFIG_MATH_EMULATION +#include <asm/math_emu.h> +#endif + +#include <linux/err.h> + +#include <asm/tlbflush.h> +#include <asm/cpu.h> + +asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); + +static int hlt_counter; + +unsigned long boot_option_idle_override = 0; +EXPORT_SYMBOL(boot_option_idle_override); + +DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; +EXPORT_PER_CPU_SYMBOL(current_task); + +DEFINE_PER_CPU(int, cpu_number); +EXPORT_PER_CPU_SYMBOL(cpu_number); + +/* + * Return saved PC of a blocked thread. + */ +unsigned long thread_saved_pc(struct task_struct *tsk) +{ + return ((unsigned long *)tsk->thread.esp)[3]; +} + +/* + * Powermanagement idle function, if any.. + */ +void (*pm_idle)(void); +EXPORT_SYMBOL(pm_idle); +static DEFINE_PER_CPU(unsigned int, cpu_idle_state); + +void disable_hlt(void) +{ + hlt_counter++; +} + +EXPORT_SYMBOL(disable_hlt); + +void enable_hlt(void) +{ + hlt_counter--; +} + +EXPORT_SYMBOL(enable_hlt); + +/* + * We use this if we don't have any better + * idle routine.. + */ +void default_idle(void) +{ + if (!hlt_counter && boot_cpu_data.hlt_works_ok) { + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); + + local_irq_disable(); + if (!need_resched()) + safe_halt(); /* enables interrupts racelessly */ + else + local_irq_enable(); + current_thread_info()->status |= TS_POLLING; + } else { + /* loop is done by the caller */ + cpu_relax(); + } +} +#ifdef CONFIG_APM_MODULE +EXPORT_SYMBOL(default_idle); +#endif + +/* + * On SMP it's slightly faster (but much more power-consuming!) + * to poll the ->work.need_resched flag instead of waiting for the + * cross-CPU IPI to arrive. Use this option with caution. + */ +static void poll_idle (void) +{ + cpu_relax(); +} + +#ifdef CONFIG_HOTPLUG_CPU +#include <asm/nmi.h> +/* We don't actually take CPU down, just spin without interrupts. */ +static inline void play_dead(void) +{ + /* This must be done before dead CPU ack */ + cpu_exit_clear(); + wbinvd(); + mb(); + /* Ack it */ + __get_cpu_var(cpu_state) = CPU_DEAD; + + /* + * With physical CPU hotplug, we should halt the cpu + */ + local_irq_disable(); + while (1) + halt(); +} +#else +static inline void play_dead(void) +{ + BUG(); +} +#endif /* CONFIG_HOTPLUG_CPU */ + +/* + * The idle thread. There's no useful work to be + * done, so just try to conserve power and have a + * low exit latency (ie sit in a loop waiting for + * somebody to say that they'd like to reschedule) + */ +void cpu_idle(void) +{ + int cpu = smp_processor_id(); + + current_thread_info()->status |= TS_POLLING; + + /* endless idle loop with no priority at all */ + while (1) { + tick_nohz_stop_sched_tick(); + while (!need_resched()) { + void (*idle)(void); + + if (__get_cpu_var(cpu_idle_state)) + __get_cpu_var(cpu_idle_state) = 0; + + check_pgt_cache(); + rmb(); + idle = pm_idle; + + if (!idle) + idle = default_idle; + + if (cpu_is_offline(cpu)) + play_dead(); + + __get_cpu_var(irq_stat).idle_timestamp = jiffies; + idle(); + } + tick_nohz_restart_sched_tick(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } +} + +void cpu_idle_wait(void) +{ + unsigned int cpu, this_cpu = get_cpu(); + cpumask_t map, tmp = current->cpus_allowed; + + set_cpus_allowed(current, cpumask_of_cpu(this_cpu)); + put_cpu(); + + cpus_clear(map); + for_each_online_cpu(cpu) { + per_cpu(cpu_idle_state, cpu) = 1; + cpu_set(cpu, map); + } + + __get_cpu_var(cpu_idle_state) = 0; + + wmb(); + do { + ssleep(1); + for_each_online_cpu(cpu) { + if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu)) + cpu_clear(cpu, map); + } + cpus_and(map, map, cpu_online_map); + } while (!cpus_empty(map)); + + set_cpus_allowed(current, tmp); +} +EXPORT_SYMBOL_GPL(cpu_idle_wait); + +/* + * This uses new MONITOR/MWAIT instructions on P4 processors with PNI, + * which can obviate IPI to trigger checking of need_resched. + * We execute MONITOR against need_resched and enter optimized wait state + * through MWAIT. Whenever someone changes need_resched, we would be woken + * up from MWAIT (without an IPI). + * + * New with Core Duo processors, MWAIT can take some hints based on CPU + * capability. + */ +void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) +{ + if (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (!need_resched()) + __mwait(eax, ecx); + } +} + +/* Default MONITOR/MWAIT with no hints, used for default C1 state */ +static void mwait_idle(void) +{ + local_irq_enable(); + mwait_idle_with_hints(0, 0); +} + +void __devinit select_idle_routine(const struct cpuinfo_x86 *c) +{ + if (cpu_has(c, X86_FEATURE_MWAIT)) { + printk("monitor/mwait feature present.\n"); + /* + * Skip, if setup has overridden idle. + * One CPU supports mwait => All CPUs supports mwait + */ + if (!pm_idle) { + printk("using mwait in idle threads.\n"); + pm_idle = mwait_idle; + } + } +} + +static int __init idle_setup(char *str) +{ + if (!strcmp(str, "poll")) { + printk("using polling idle threads.\n"); + pm_idle = poll_idle; +#ifdef CONFIG_X86_SMP + if (smp_num_siblings > 1) + printk("WARNING: polling idle and HT enabled, performance may degrade.\n"); +#endif + } else if (!strcmp(str, "mwait")) + force_mwait = 1; + else + return -1; + + boot_option_idle_override = 1; + return 0; +} +early_param("idle", idle_setup); + +void show_regs(struct pt_regs * regs) +{ + unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L; + unsigned long d0, d1, d2, d3, d6, d7; + + printk("\n"); + printk("Pid: %d, comm: %20s\n", current->pid, current->comm); + printk("EIP: %04x:[<%08lx>] CPU: %d\n",0xffff & regs->xcs,regs->eip, smp_processor_id()); + print_symbol("EIP is at %s\n", regs->eip); + + if (user_mode_vm(regs)) + printk(" ESP: %04x:%08lx",0xffff & regs->xss,regs->esp); + printk(" EFLAGS: %08lx %s (%s %.*s)\n", + regs->eflags, print_tainted(), init_utsname()->release, + (int)strcspn(init_utsname()->version, " "), + init_utsname()->version); + printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", + regs->eax,regs->ebx,regs->ecx,regs->edx); + printk("ESI: %08lx EDI: %08lx EBP: %08lx", + regs->esi, regs->edi, regs->ebp); + printk(" DS: %04x ES: %04x FS: %04x\n", + 0xffff & regs->xds,0xffff & regs->xes, 0xffff & regs->xfs); + + cr0 = read_cr0(); + cr2 = read_cr2(); + cr3 = read_cr3(); + cr4 = read_cr4_safe(); + printk("CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", cr0, cr2, cr3, cr4); + + get_debugreg(d0, 0); + get_debugreg(d1, 1); + get_debugreg(d2, 2); + get_debugreg(d3, 3); + printk("DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n", + d0, d1, d2, d3); + get_debugreg(d6, 6); + get_debugreg(d7, 7); + printk("DR6: %08lx DR7: %08lx\n", d6, d7); + + show_trace(NULL, regs, ®s->esp); +} + +/* + * This gets run with %ebx containing the + * function to call, and %edx containing + * the "args". + */ +extern void kernel_thread_helper(void); + +/* + * Create a kernel thread + */ +int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) +{ + struct pt_regs regs; + + memset(®s, 0, sizeof(regs)); + + regs.ebx = (unsigned long) fn; + regs.edx = (unsigned long) arg; + + regs.xds = __USER_DS; + regs.xes = __USER_DS; + regs.xfs = __KERNEL_PERCPU; + regs.orig_eax = -1; + regs.eip = (unsigned long) kernel_thread_helper; + regs.xcs = __KERNEL_CS | get_kernel_rpl(); + regs.eflags = X86_EFLAGS_IF | X86_EFLAGS_SF | X86_EFLAGS_PF | 0x2; + + /* Ok, create the new process.. */ + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); +} +EXPORT_SYMBOL(kernel_thread); + +/* + * Free current thread data structures etc.. + */ +void exit_thread(void) +{ + /* The process may have allocated an io port bitmap... nuke it. */ + if (unlikely(test_thread_flag(TIF_IO_BITMAP))) { + struct task_struct *tsk = current; + struct thread_struct *t = &tsk->thread; + int cpu = get_cpu(); + struct tss_struct *tss = &per_cpu(init_tss, cpu); + + kfree(t->io_bitmap_ptr); + t->io_bitmap_ptr = NULL; + clear_thread_flag(TIF_IO_BITMAP); + /* + * Careful, clear this in the TSS too: + */ + memset(tss->io_bitmap, 0xff, tss->io_bitmap_max); + t->io_bitmap_max = 0; + tss->io_bitmap_owner = NULL; + tss->io_bitmap_max = 0; + tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET; + put_cpu(); + } +} + +void flush_thread(void) +{ + struct task_struct *tsk = current; + + memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8); + memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); + clear_tsk_thread_flag(tsk, TIF_DEBUG); + /* + * Forget coprocessor state.. + */ + clear_fpu(tsk); + clear_used_math(); +} + +void release_thread(struct task_struct *dead_task) +{ + BUG_ON(dead_task->mm); + release_vm86_irqs(dead_task); +} + +/* + * This gets called before we allocate a new thread and copy + * the current task into it. + */ +void prepare_to_copy(struct task_struct *tsk) +{ + unlazy_fpu(tsk); +} + +int copy_thread(int nr, unsigned long clone_flags, unsigned long esp, + unsigned long unused, + struct task_struct * p, struct pt_regs * regs) +{ + struct pt_regs * childregs; + struct task_struct *tsk; + int err; + + childregs = task_pt_regs(p); + *childregs = *regs; + childregs->eax = 0; + childregs->esp = esp; + + p->thread.esp = (unsigned long) childregs; + p->thread.esp0 = (unsigned long) (childregs+1); + + p->thread.eip = (unsigned long) ret_from_fork; + + savesegment(gs,p->thread.gs); + + tsk = current; + if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) { + p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr, + IO_BITMAP_BYTES, GFP_KERNEL); + if (!p->thread.io_bitmap_ptr) { + p->thread.io_bitmap_max = 0; + return -ENOMEM; + } + set_tsk_thread_flag(p, TIF_IO_BITMAP); + } + + /* + * Set a new TLS for the child thread? + */ + if (clone_flags & CLONE_SETTLS) { + struct desc_struct *desc; + struct user_desc info; + int idx; + + err = -EFAULT; + if (copy_from_user(&info, (void __user *)childregs->esi, sizeof(info))) + goto out; + err = -EINVAL; + if (LDT_empty(&info)) + goto out; + + idx = info.entry_number; + if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) + goto out; + + desc = p->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; + desc->a = LDT_entry_a(&info); + desc->b = LDT_entry_b(&info); + } + + err = 0; + out: + if (err && p->thread.io_bitmap_ptr) { + kfree(p->thread.io_bitmap_ptr); + p->thread.io_bitmap_max = 0; + } + return err; +} + +/* + * fill in the user structure for a core dump.. + */ +void dump_thread(struct pt_regs * regs, struct user * dump) +{ + int i; + +/* changed the size calculations - should hopefully work better. lbt */ + dump->magic = CMAGIC; + dump->start_code = 0; + dump->start_stack = regs->esp & ~(PAGE_SIZE - 1); + dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT; + dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT; + dump->u_dsize -= dump->u_tsize; + dump->u_ssize = 0; + for (i = 0; i < 8; i++) + dump->u_debugreg[i] = current->thread.debugreg[i]; + + if (dump->start_stack < TASK_SIZE) + dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT; + + dump->regs.ebx = regs->ebx; + dump->regs.ecx = regs->ecx; + dump->regs.edx = regs->edx; + dump->regs.esi = regs->esi; + dump->regs.edi = regs->edi; + dump->regs.ebp = regs->ebp; + dump->regs.eax = regs->eax; + dump->regs.ds = regs->xds; + dump->regs.es = regs->xes; + dump->regs.fs = regs->xfs; + savesegment(gs,dump->regs.gs); + dump->regs.orig_eax = regs->orig_eax; + dump->regs.eip = regs->eip; + dump->regs.cs = regs->xcs; + dump->regs.eflags = regs->eflags; + dump->regs.esp = regs->esp; + dump->regs.ss = regs->xss; + + dump->u_fpvalid = dump_fpu (regs, &dump->i387); +} +EXPORT_SYMBOL(dump_thread); + +/* + * Capture the user space registers if the task is not running (in user space) + */ +int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) +{ + struct pt_regs ptregs = *task_pt_regs(tsk); + ptregs.xcs &= 0xffff; + ptregs.xds &= 0xffff; + ptregs.xes &= 0xffff; + ptregs.xss &= 0xffff; + + elf_core_copy_regs(regs, &ptregs); + + return 1; +} + +#ifdef CONFIG_SECCOMP +void hard_disable_TSC(void) +{ + write_cr4(read_cr4() | X86_CR4_TSD); +} +void disable_TSC(void) +{ + preempt_disable(); + if (!test_and_set_thread_flag(TIF_NOTSC)) + /* + * Must flip the CPU state synchronously with + * TIF_NOTSC in the current running context. + */ + hard_disable_TSC(); + preempt_enable(); +} +void hard_enable_TSC(void) +{ + write_cr4(read_cr4() & ~X86_CR4_TSD); +} +#endif /* CONFIG_SECCOMP */ + +static noinline void +__switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, + struct tss_struct *tss) +{ + struct thread_struct *next; + + next = &next_p->thread; + + if (test_tsk_thread_flag(next_p, TIF_DEBUG)) { + set_debugreg(next->debugreg[0], 0); + set_debugreg(next->debugreg[1], 1); + set_debugreg(next->debugreg[2], 2); + set_debugreg(next->debugreg[3], 3); + /* no 4 and 5 */ + set_debugreg(next->debugreg[6], 6); + set_debugreg(next->debugreg[7], 7); + } + +#ifdef CONFIG_SECCOMP + if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^ + test_tsk_thread_flag(next_p, TIF_NOTSC)) { + /* prev and next are different */ + if (test_tsk_thread_flag(next_p, TIF_NOTSC)) + hard_disable_TSC(); + else + hard_enable_TSC(); + } +#endif + + if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { + /* + * Disable the bitmap via an invalid offset. We still cache + * the previous bitmap owner and the IO bitmap contents: + */ + tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET; + return; + } + + if (likely(next == tss->io_bitmap_owner)) { + /* + * Previous owner of the bitmap (hence the bitmap content) + * matches the next task, we dont have to do anything but + * to set a valid offset in the TSS: + */ + tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET; + return; + } + /* + * Lazy TSS's I/O bitmap copy. We set an invalid offset here + * and we let the task to get a GPF in case an I/O instruction + * is performed. The handler of the GPF will verify that the + * faulting task has a valid I/O bitmap and, it true, does the + * real copy and restart the instruction. This will save us + * redundant copies when the currently switched task does not + * perform any I/O during its timeslice. + */ + tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY; +} + +/* + * switch_to(x,yn) should switch tasks from x to y. + * + * We fsave/fwait so that an exception goes off at the right time + * (as a call from the fsave or fwait in effect) rather than to + * the wrong process. Lazy FP saving no longer makes any sense + * with modern CPU's, and this simplifies a lot of things (SMP + * and UP become the same). + * + * NOTE! We used to use the x86 hardware context switching. The + * reason for not using it any more becomes apparent when you + * try to recover gracefully from saved state that is no longer + * valid (stale segment register values in particular). With the + * hardware task-switch, there is no way to fix up bad state in + * a reasonable manner. + * + * The fact that Intel documents the hardware task-switching to + * be slow is a fairly red herring - this code is not noticeably + * faster. However, there _is_ some room for improvement here, + * so the performance issues may eventually be a valid point. + * More important, however, is the fact that this allows us much + * more flexibility. + * + * The return value (in %eax) will be the "prev" task after + * the task-switch, and shows up in ret_from_fork in entry.S, + * for example. + */ +struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct task_struct *next_p) +{ + struct thread_struct *prev = &prev_p->thread, + *next = &next_p->thread; + int cpu = smp_processor_id(); + struct tss_struct *tss = &per_cpu(init_tss, cpu); + + /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ + + __unlazy_fpu(prev_p); + + + /* we're going to use this soon, after a few expensive things */ + if (next_p->fpu_counter > 5) + prefetch(&next->i387.fxsave); + + /* + * Reload esp0. + */ + load_esp0(tss, next); + + /* + * Save away %gs. No need to save %fs, as it was saved on the + * stack on entry. No need to save %es and %ds, as those are + * always kernel segments while inside the kernel. Doing this + * before setting the new TLS descriptors avoids the situation + * where we temporarily have non-reloadable segments in %fs + * and %gs. This could be an issue if the NMI handler ever + * used %fs or %gs (it does not today), or if the kernel is + * running inside of a hypervisor layer. + */ + savesegment(gs, prev->gs); + + /* + * Load the per-thread Thread-Local Storage descriptor. + */ + load_TLS(next, cpu); + + /* + * Restore IOPL if needed. In normal use, the flags restore + * in the switch assembly will handle this. But if the kernel + * is running virtualized at a non-zero CPL, the popf will + * not restore flags, so it must be done in a separate step. + */ + if (get_kernel_rpl() && unlikely(prev->iopl != next->iopl)) + set_iopl_mask(next->iopl); + + /* + * Now maybe handle debug registers and/or IO bitmaps + */ + if (unlikely(task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV || + task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT)) + __switch_to_xtra(prev_p, next_p, tss); + + /* + * Leave lazy mode, flushing any hypercalls made here. + * This must be done before restoring TLS segments so + * the GDT and LDT are properly updated, and must be + * done before math_state_restore, so the TS bit is up + * to date. + */ + arch_leave_lazy_cpu_mode(); + + /* If the task has used fpu the last 5 timeslices, just do a full + * restore of the math state immediately to avoid the trap; the + * chances of needing FPU soon are obviously high now + */ + if (next_p->fpu_counter > 5) + math_state_restore(); + + /* + * Restore %gs if needed (which is common) + */ + if (prev->gs | next->gs) + loadsegment(gs, next->gs); + + x86_write_percpu(current_task, next_p); + + return prev_p; +} + +asmlinkage int sys_fork(struct pt_regs regs) +{ + return do_fork(SIGCHLD, regs.esp, ®s, 0, NULL, NULL); +} + +asmlinkage int sys_clone(struct pt_regs regs) +{ + unsigned long clone_flags; + unsigned long newsp; + int __user *parent_tidptr, *child_tidptr; + + clone_flags = regs.ebx; + newsp = regs.ecx; + parent_tidptr = (int __user *)regs.edx; + child_tidptr = (int __user *)regs.edi; + if (!newsp) + newsp = regs.esp; + return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr); +} + +/* + * This is trivial, and on the face of it looks like it + * could equally well be done in user mode. + * + * Not so, for quite unobvious reasons - register pressure. + * In user mode vfork() cannot have a stack frame, and if + * done by calling the "clone()" system call directly, you + * do not have enough call-clobbered registers to hold all + * the information you need. + */ +asmlinkage int sys_vfork(struct pt_regs regs) +{ + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.esp, ®s, 0, NULL, NULL); +} + +/* + * sys_execve() executes a new program. + */ +asmlinkage int sys_execve(struct pt_regs regs) +{ + int error; + char * filename; + + filename = getname((char __user *) regs.ebx); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + error = do_execve(filename, + (char __user * __user *) regs.ecx, + (char __user * __user *) regs.edx, + ®s); + if (error == 0) { + task_lock(current); + current->ptrace &= ~PT_DTRACE; + task_unlock(current); + /* Make sure we don't return using sysenter.. */ + set_thread_flag(TIF_IRET); + } + putname(filename); +out: + return error; +} + +#define top_esp (THREAD_SIZE - sizeof(unsigned long)) +#define top_ebp (THREAD_SIZE - 2*sizeof(unsigned long)) + +unsigned long get_wchan(struct task_struct *p) +{ + unsigned long ebp, esp, eip; + unsigned long stack_page; + int count = 0; + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + stack_page = (unsigned long)task_stack_page(p); + esp = p->thread.esp; + if (!stack_page || esp < stack_page || esp > top_esp+stack_page) + return 0; + /* include/asm-i386/system.h:switch_to() pushes ebp last. */ + ebp = *(unsigned long *) esp; + do { + if (ebp < stack_page || ebp > top_ebp+stack_page) + return 0; + eip = *(unsigned long *) (ebp+4); + if (!in_sched_functions(eip)) + return eip; + ebp = *(unsigned long *) ebp; + } while (count++ < 16); + return 0; +} + +/* + * sys_alloc_thread_area: get a yet unused TLS descriptor index. + */ +static int get_free_idx(void) +{ + struct thread_struct *t = ¤t->thread; + int idx; + + for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++) + if (desc_empty(t->tls_array + idx)) + return idx + GDT_ENTRY_TLS_MIN; + return -ESRCH; +} + +/* + * Set a given TLS descriptor: + */ +asmlinkage int sys_set_thread_area(struct user_desc __user *u_info) +{ + struct thread_struct *t = ¤t->thread; + struct user_desc info; + struct desc_struct *desc; + int cpu, idx; + + if (copy_from_user(&info, u_info, sizeof(info))) + return -EFAULT; + idx = info.entry_number; + + /* + * index -1 means the kernel should try to find and + * allocate an empty descriptor: + */ + if (idx == -1) { + idx = get_free_idx(); + if (idx < 0) + return idx; + if (put_user(idx, &u_info->entry_number)) + return -EFAULT; + } + + if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) + return -EINVAL; + + desc = t->tls_array + idx - GDT_ENTRY_TLS_MIN; + + /* + * We must not get preempted while modifying the TLS. + */ + cpu = get_cpu(); + + if (LDT_empty(&info)) { + desc->a = 0; + desc->b = 0; + } else { + desc->a = LDT_entry_a(&info); + desc->b = LDT_entry_b(&info); + } + load_TLS(t, cpu); + + put_cpu(); + + return 0; +} + +/* + * Get the current Thread-Local Storage area: + */ + +#define GET_BASE(desc) ( \ + (((desc)->a >> 16) & 0x0000ffff) | \ + (((desc)->b << 16) & 0x00ff0000) | \ + ( (desc)->b & 0xff000000) ) + +#define GET_LIMIT(desc) ( \ + ((desc)->a & 0x0ffff) | \ + ((desc)->b & 0xf0000) ) + +#define GET_32BIT(desc) (((desc)->b >> 22) & 1) +#define GET_CONTENTS(desc) (((desc)->b >> 10) & 3) +#define GET_WRITABLE(desc) (((desc)->b >> 9) & 1) +#define GET_LIMIT_PAGES(desc) (((desc)->b >> 23) & 1) +#define GET_PRESENT(desc) (((desc)->b >> 15) & 1) +#define GET_USEABLE(desc) (((desc)->b >> 20) & 1) + +asmlinkage int sys_get_thread_area(struct user_desc __user *u_info) +{ + struct user_desc info; + struct desc_struct *desc; + int idx; + + if (get_user(idx, &u_info->entry_number)) + return -EFAULT; + if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) + return -EINVAL; + + memset(&info, 0, sizeof(info)); + + desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; + + info.entry_number = idx; + info.base_addr = GET_BASE(desc); + info.limit = GET_LIMIT(desc); + info.seg_32bit = GET_32BIT(desc); + info.contents = GET_CONTENTS(desc); + info.read_exec_only = !GET_WRITABLE(desc); + info.limit_in_pages = GET_LIMIT_PAGES(desc); + info.seg_not_present = !GET_PRESENT(desc); + info.useable = GET_USEABLE(desc); + + if (copy_to_user(u_info, &info, sizeof(info))) + return -EFAULT; + return 0; +} + +unsigned long arch_align_stack(unsigned long sp) +{ + if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) + sp -= get_random_int() % 8192; + return sp & ~0xf; +} diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c new file mode 100644 index 000000000000..98956555450b --- /dev/null +++ b/arch/x86/kernel/process_64.c @@ -0,0 +1,903 @@ +/* + * linux/arch/x86-64/kernel/process.c + * + * Copyright (C) 1995 Linus Torvalds + * + * Pentium III FXSR, SSE support + * Gareth Hughes <gareth@valinux.com>, May 2000 + * + * X86-64 port + * Andi Kleen. + * + * CPU hotplug support - ashok.raj@intel.com + */ + +/* + * This file handles the architecture-dependent parts of process handling.. + */ + +#include <stdarg.h> + +#include <linux/cpu.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/elfcore.h> +#include <linux/smp.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/module.h> +#include <linux/a.out.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/ptrace.h> +#include <linux/utsname.h> +#include <linux/random.h> +#include <linux/notifier.h> +#include <linux/kprobes.h> +#include <linux/kdebug.h> + +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/i387.h> +#include <asm/mmu_context.h> +#include <asm/pda.h> +#include <asm/prctl.h> +#include <asm/desc.h> +#include <asm/proto.h> +#include <asm/ia32.h> +#include <asm/idle.h> + +asmlinkage extern void ret_from_fork(void); + +unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED; + +unsigned long boot_option_idle_override = 0; +EXPORT_SYMBOL(boot_option_idle_override); + +/* + * Powermanagement idle function, if any.. + */ +void (*pm_idle)(void); +EXPORT_SYMBOL(pm_idle); +static DEFINE_PER_CPU(unsigned int, cpu_idle_state); + +static ATOMIC_NOTIFIER_HEAD(idle_notifier); + +void idle_notifier_register(struct notifier_block *n) +{ + atomic_notifier_chain_register(&idle_notifier, n); +} +EXPORT_SYMBOL_GPL(idle_notifier_register); + +void idle_notifier_unregister(struct notifier_block *n) +{ + atomic_notifier_chain_unregister(&idle_notifier, n); +} +EXPORT_SYMBOL(idle_notifier_unregister); + +void enter_idle(void) +{ + write_pda(isidle, 1); + atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); +} + +static void __exit_idle(void) +{ + if (test_and_clear_bit_pda(0, isidle) == 0) + return; + atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); +} + +/* Called from interrupts to signify idle end */ +void exit_idle(void) +{ + /* idle loop has pid 0 */ + if (current->pid) + return; + __exit_idle(); +} + +/* + * We use this if we don't have any better + * idle routine.. + */ +static void default_idle(void) +{ + current_thread_info()->status &= ~TS_POLLING; + /* + * TS_POLLING-cleared state must be visible before we + * test NEED_RESCHED: + */ + smp_mb(); + local_irq_disable(); + if (!need_resched()) { + /* Enables interrupts one instruction before HLT. + x86 special cases this so there is no race. */ + safe_halt(); + } else + local_irq_enable(); + current_thread_info()->status |= TS_POLLING; +} + +/* + * On SMP it's slightly faster (but much more power-consuming!) + * to poll the ->need_resched flag instead of waiting for the + * cross-CPU IPI to arrive. Use this option with caution. + */ +static void poll_idle (void) +{ + local_irq_enable(); + cpu_relax(); +} + +void cpu_idle_wait(void) +{ + unsigned int cpu, this_cpu = get_cpu(); + cpumask_t map, tmp = current->cpus_allowed; + + set_cpus_allowed(current, cpumask_of_cpu(this_cpu)); + put_cpu(); + + cpus_clear(map); + for_each_online_cpu(cpu) { + per_cpu(cpu_idle_state, cpu) = 1; + cpu_set(cpu, map); + } + + __get_cpu_var(cpu_idle_state) = 0; + + wmb(); + do { + ssleep(1); + for_each_online_cpu(cpu) { + if (cpu_isset(cpu, map) && + !per_cpu(cpu_idle_state, cpu)) + cpu_clear(cpu, map); + } + cpus_and(map, map, cpu_online_map); + } while (!cpus_empty(map)); + + set_cpus_allowed(current, tmp); +} +EXPORT_SYMBOL_GPL(cpu_idle_wait); + +#ifdef CONFIG_HOTPLUG_CPU +DECLARE_PER_CPU(int, cpu_state); + +#include <asm/nmi.h> +/* We halt the CPU with physical CPU hotplug */ +static inline void play_dead(void) +{ + idle_task_exit(); + wbinvd(); + mb(); + /* Ack it */ + __get_cpu_var(cpu_state) = CPU_DEAD; + + local_irq_disable(); + while (1) + halt(); +} +#else +static inline void play_dead(void) +{ + BUG(); +} +#endif /* CONFIG_HOTPLUG_CPU */ + +/* + * The idle thread. There's no useful work to be + * done, so just try to conserve power and have a + * low exit latency (ie sit in a loop waiting for + * somebody to say that they'd like to reschedule) + */ +void cpu_idle (void) +{ + current_thread_info()->status |= TS_POLLING; + /* endless idle loop with no priority at all */ + while (1) { + while (!need_resched()) { + void (*idle)(void); + + if (__get_cpu_var(cpu_idle_state)) + __get_cpu_var(cpu_idle_state) = 0; + + rmb(); + idle = pm_idle; + if (!idle) + idle = default_idle; + if (cpu_is_offline(smp_processor_id())) + play_dead(); + /* + * Idle routines should keep interrupts disabled + * from here on, until they go to idle. + * Otherwise, idle callbacks can misfire. + */ + local_irq_disable(); + enter_idle(); + idle(); + /* In many cases the interrupt that ended idle + has already called exit_idle. But some idle + loops can be woken up without interrupt. */ + __exit_idle(); + } + + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } +} + +/* + * This uses new MONITOR/MWAIT instructions on P4 processors with PNI, + * which can obviate IPI to trigger checking of need_resched. + * We execute MONITOR against need_resched and enter optimized wait state + * through MWAIT. Whenever someone changes need_resched, we would be woken + * up from MWAIT (without an IPI). + * + * New with Core Duo processors, MWAIT can take some hints based on CPU + * capability. + */ +void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) +{ + if (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (!need_resched()) + __mwait(eax, ecx); + } +} + +/* Default MONITOR/MWAIT with no hints, used for default C1 state */ +static void mwait_idle(void) +{ + if (!need_resched()) { + __monitor((void *)¤t_thread_info()->flags, 0, 0); + smp_mb(); + if (!need_resched()) + __sti_mwait(0, 0); + else + local_irq_enable(); + } else { + local_irq_enable(); + } +} + +void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) +{ + static int printed; + if (cpu_has(c, X86_FEATURE_MWAIT)) { + /* + * Skip, if setup has overridden idle. + * One CPU supports mwait => All CPUs supports mwait + */ + if (!pm_idle) { + if (!printed) { + printk(KERN_INFO "using mwait in idle threads.\n"); + printed = 1; + } + pm_idle = mwait_idle; + } + } +} + +static int __init idle_setup (char *str) +{ + if (!strcmp(str, "poll")) { + printk("using polling idle threads.\n"); + pm_idle = poll_idle; + } else if (!strcmp(str, "mwait")) + force_mwait = 1; + else + return -1; + + boot_option_idle_override = 1; + return 0; +} +early_param("idle", idle_setup); + +/* Prints also some state that isn't saved in the pt_regs */ +void __show_regs(struct pt_regs * regs) +{ + unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs; + unsigned long d0, d1, d2, d3, d6, d7; + unsigned int fsindex,gsindex; + unsigned int ds,cs,es; + + printk("\n"); + print_modules(); + printk("Pid: %d, comm: %.20s %s %s %.*s\n", + current->pid, current->comm, print_tainted(), + init_utsname()->release, + (int)strcspn(init_utsname()->version, " "), + init_utsname()->version); + printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->rip); + printk_address(regs->rip); + printk("RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->rsp, + regs->eflags); + printk("RAX: %016lx RBX: %016lx RCX: %016lx\n", + regs->rax, regs->rbx, regs->rcx); + printk("RDX: %016lx RSI: %016lx RDI: %016lx\n", + regs->rdx, regs->rsi, regs->rdi); + printk("RBP: %016lx R08: %016lx R09: %016lx\n", + regs->rbp, regs->r8, regs->r9); + printk("R10: %016lx R11: %016lx R12: %016lx\n", + regs->r10, regs->r11, regs->r12); + printk("R13: %016lx R14: %016lx R15: %016lx\n", + regs->r13, regs->r14, regs->r15); + + asm("movl %%ds,%0" : "=r" (ds)); + asm("movl %%cs,%0" : "=r" (cs)); + asm("movl %%es,%0" : "=r" (es)); + asm("movl %%fs,%0" : "=r" (fsindex)); + asm("movl %%gs,%0" : "=r" (gsindex)); + + rdmsrl(MSR_FS_BASE, fs); + rdmsrl(MSR_GS_BASE, gs); + rdmsrl(MSR_KERNEL_GS_BASE, shadowgs); + + cr0 = read_cr0(); + cr2 = read_cr2(); + cr3 = read_cr3(); + cr4 = read_cr4(); + + printk("FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", + fs,fsindex,gs,gsindex,shadowgs); + printk("CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, es, cr0); + printk("CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, cr4); + + get_debugreg(d0, 0); + get_debugreg(d1, 1); + get_debugreg(d2, 2); + printk("DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); + get_debugreg(d3, 3); + get_debugreg(d6, 6); + get_debugreg(d7, 7); + printk("DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); +} + +void show_regs(struct pt_regs *regs) +{ + printk("CPU %d:", smp_processor_id()); + __show_regs(regs); + show_trace(NULL, regs, (void *)(regs + 1)); +} + +/* + * Free current thread data structures etc.. + */ +void exit_thread(void) +{ + struct task_struct *me = current; + struct thread_struct *t = &me->thread; + + if (me->thread.io_bitmap_ptr) { + struct tss_struct *tss = &per_cpu(init_tss, get_cpu()); + + kfree(t->io_bitmap_ptr); + t->io_bitmap_ptr = NULL; + clear_thread_flag(TIF_IO_BITMAP); + /* + * Careful, clear this in the TSS too: + */ + memset(tss->io_bitmap, 0xff, t->io_bitmap_max); + t->io_bitmap_max = 0; + put_cpu(); + } +} + +void flush_thread(void) +{ + struct task_struct *tsk = current; + + if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) { + clear_tsk_thread_flag(tsk, TIF_ABI_PENDING); + if (test_tsk_thread_flag(tsk, TIF_IA32)) { + clear_tsk_thread_flag(tsk, TIF_IA32); + } else { + set_tsk_thread_flag(tsk, TIF_IA32); + current_thread_info()->status |= TS_COMPAT; + } + } + clear_tsk_thread_flag(tsk, TIF_DEBUG); + + tsk->thread.debugreg0 = 0; + tsk->thread.debugreg1 = 0; + tsk->thread.debugreg2 = 0; + tsk->thread.debugreg3 = 0; + tsk->thread.debugreg6 = 0; + tsk->thread.debugreg7 = 0; + memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); + /* + * Forget coprocessor state.. + */ + clear_fpu(tsk); + clear_used_math(); +} + +void release_thread(struct task_struct *dead_task) +{ + if (dead_task->mm) { + if (dead_task->mm->context.size) { + printk("WARNING: dead process %8s still has LDT? <%p/%d>\n", + dead_task->comm, + dead_task->mm->context.ldt, + dead_task->mm->context.size); + BUG(); + } + } +} + +static inline void set_32bit_tls(struct task_struct *t, int tls, u32 addr) +{ + struct user_desc ud = { + .base_addr = addr, + .limit = 0xfffff, + .seg_32bit = 1, + .limit_in_pages = 1, + .useable = 1, + }; + struct n_desc_struct *desc = (void *)t->thread.tls_array; + desc += tls; + desc->a = LDT_entry_a(&ud); + desc->b = LDT_entry_b(&ud); +} + +static inline u32 read_32bit_tls(struct task_struct *t, int tls) +{ + struct desc_struct *desc = (void *)t->thread.tls_array; + desc += tls; + return desc->base0 | + (((u32)desc->base1) << 16) | + (((u32)desc->base2) << 24); +} + +/* + * This gets called before we allocate a new thread and copy + * the current task into it. + */ +void prepare_to_copy(struct task_struct *tsk) +{ + unlazy_fpu(tsk); +} + +int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, + unsigned long unused, + struct task_struct * p, struct pt_regs * regs) +{ + int err; + struct pt_regs * childregs; + struct task_struct *me = current; + + childregs = ((struct pt_regs *) + (THREAD_SIZE + task_stack_page(p))) - 1; + *childregs = *regs; + + childregs->rax = 0; + childregs->rsp = rsp; + if (rsp == ~0UL) + childregs->rsp = (unsigned long)childregs; + + p->thread.rsp = (unsigned long) childregs; + p->thread.rsp0 = (unsigned long) (childregs+1); + p->thread.userrsp = me->thread.userrsp; + + set_tsk_thread_flag(p, TIF_FORK); + + p->thread.fs = me->thread.fs; + p->thread.gs = me->thread.gs; + + asm("mov %%gs,%0" : "=m" (p->thread.gsindex)); + asm("mov %%fs,%0" : "=m" (p->thread.fsindex)); + asm("mov %%es,%0" : "=m" (p->thread.es)); + asm("mov %%ds,%0" : "=m" (p->thread.ds)); + + if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) { + p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); + if (!p->thread.io_bitmap_ptr) { + p->thread.io_bitmap_max = 0; + return -ENOMEM; + } + memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, + IO_BITMAP_BYTES); + set_tsk_thread_flag(p, TIF_IO_BITMAP); + } + + /* + * Set a new TLS for the child thread? + */ + if (clone_flags & CLONE_SETTLS) { +#ifdef CONFIG_IA32_EMULATION + if (test_thread_flag(TIF_IA32)) + err = ia32_child_tls(p, childregs); + else +#endif + err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8); + if (err) + goto out; + } + err = 0; +out: + if (err && p->thread.io_bitmap_ptr) { + kfree(p->thread.io_bitmap_ptr); + p->thread.io_bitmap_max = 0; + } + return err; +} + +/* + * This special macro can be used to load a debugging register + */ +#define loaddebug(thread,r) set_debugreg(thread->debugreg ## r, r) + +static inline void __switch_to_xtra(struct task_struct *prev_p, + struct task_struct *next_p, + struct tss_struct *tss) +{ + struct thread_struct *prev, *next; + + prev = &prev_p->thread, + next = &next_p->thread; + + if (test_tsk_thread_flag(next_p, TIF_DEBUG)) { + loaddebug(next, 0); + loaddebug(next, 1); + loaddebug(next, 2); + loaddebug(next, 3); + /* no 4 and 5 */ + loaddebug(next, 6); + loaddebug(next, 7); + } + + if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { + /* + * Copy the relevant range of the IO bitmap. + * Normally this is 128 bytes or less: + */ + memcpy(tss->io_bitmap, next->io_bitmap_ptr, + max(prev->io_bitmap_max, next->io_bitmap_max)); + } else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) { + /* + * Clear any possible leftover bits: + */ + memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); + } +} + +/* + * switch_to(x,y) should switch tasks from x to y. + * + * This could still be optimized: + * - fold all the options into a flag word and test it with a single test. + * - could test fs/gs bitsliced + * + * Kprobes not supported here. Set the probe on schedule instead. + */ +__kprobes struct task_struct * +__switch_to(struct task_struct *prev_p, struct task_struct *next_p) +{ + struct thread_struct *prev = &prev_p->thread, + *next = &next_p->thread; + int cpu = smp_processor_id(); + struct tss_struct *tss = &per_cpu(init_tss, cpu); + + /* we're going to use this soon, after a few expensive things */ + if (next_p->fpu_counter>5) + prefetch(&next->i387.fxsave); + + /* + * Reload esp0, LDT and the page table pointer: + */ + tss->rsp0 = next->rsp0; + + /* + * Switch DS and ES. + * This won't pick up thread selector changes, but I guess that is ok. + */ + asm volatile("mov %%es,%0" : "=m" (prev->es)); + if (unlikely(next->es | prev->es)) + loadsegment(es, next->es); + + asm volatile ("mov %%ds,%0" : "=m" (prev->ds)); + if (unlikely(next->ds | prev->ds)) + loadsegment(ds, next->ds); + + load_TLS(next, cpu); + + /* + * Switch FS and GS. + */ + { + unsigned fsindex; + asm volatile("movl %%fs,%0" : "=r" (fsindex)); + /* segment register != 0 always requires a reload. + also reload when it has changed. + when prev process used 64bit base always reload + to avoid an information leak. */ + if (unlikely(fsindex | next->fsindex | prev->fs)) { + loadsegment(fs, next->fsindex); + /* check if the user used a selector != 0 + * if yes clear 64bit base, since overloaded base + * is always mapped to the Null selector + */ + if (fsindex) + prev->fs = 0; + } + /* when next process has a 64bit base use it */ + if (next->fs) + wrmsrl(MSR_FS_BASE, next->fs); + prev->fsindex = fsindex; + } + { + unsigned gsindex; + asm volatile("movl %%gs,%0" : "=r" (gsindex)); + if (unlikely(gsindex | next->gsindex | prev->gs)) { + load_gs_index(next->gsindex); + if (gsindex) + prev->gs = 0; + } + if (next->gs) + wrmsrl(MSR_KERNEL_GS_BASE, next->gs); + prev->gsindex = gsindex; + } + + /* Must be after DS reload */ + unlazy_fpu(prev_p); + + /* + * Switch the PDA and FPU contexts. + */ + prev->userrsp = read_pda(oldrsp); + write_pda(oldrsp, next->userrsp); + write_pda(pcurrent, next_p); + + write_pda(kernelstack, + (unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET); +#ifdef CONFIG_CC_STACKPROTECTOR + write_pda(stack_canary, next_p->stack_canary); + /* + * Build time only check to make sure the stack_canary is at + * offset 40 in the pda; this is a gcc ABI requirement + */ + BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40); +#endif + + /* + * Now maybe reload the debug registers and handle I/O bitmaps + */ + if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW)) + || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) + __switch_to_xtra(prev_p, next_p, tss); + + /* If the task has used fpu the last 5 timeslices, just do a full + * restore of the math state immediately to avoid the trap; the + * chances of needing FPU soon are obviously high now + */ + if (next_p->fpu_counter>5) + math_state_restore(); + return prev_p; +} + +/* + * sys_execve() executes a new program. + */ +asmlinkage +long sys_execve(char __user *name, char __user * __user *argv, + char __user * __user *envp, struct pt_regs regs) +{ + long error; + char * filename; + + filename = getname(name); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + return error; + error = do_execve(filename, argv, envp, ®s); + if (error == 0) { + task_lock(current); + current->ptrace &= ~PT_DTRACE; + task_unlock(current); + } + putname(filename); + return error; +} + +void set_personality_64bit(void) +{ + /* inherit personality from parent */ + + /* Make sure to be in 64bit mode */ + clear_thread_flag(TIF_IA32); + + /* TBD: overwrites user setup. Should have two bits. + But 64bit processes have always behaved this way, + so it's not too bad. The main problem is just that + 32bit childs are affected again. */ + current->personality &= ~READ_IMPLIES_EXEC; +} + +asmlinkage long sys_fork(struct pt_regs *regs) +{ + return do_fork(SIGCHLD, regs->rsp, regs, 0, NULL, NULL); +} + +asmlinkage long +sys_clone(unsigned long clone_flags, unsigned long newsp, + void __user *parent_tid, void __user *child_tid, struct pt_regs *regs) +{ + if (!newsp) + newsp = regs->rsp; + return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid); +} + +/* + * This is trivial, and on the face of it looks like it + * could equally well be done in user mode. + * + * Not so, for quite unobvious reasons - register pressure. + * In user mode vfork() cannot have a stack frame, and if + * done by calling the "clone()" system call directly, you + * do not have enough call-clobbered registers to hold all + * the information you need. + */ +asmlinkage long sys_vfork(struct pt_regs *regs) +{ + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->rsp, regs, 0, + NULL, NULL); +} + +unsigned long get_wchan(struct task_struct *p) +{ + unsigned long stack; + u64 fp,rip; + int count = 0; + + if (!p || p == current || p->state==TASK_RUNNING) + return 0; + stack = (unsigned long)task_stack_page(p); + if (p->thread.rsp < stack || p->thread.rsp > stack+THREAD_SIZE) + return 0; + fp = *(u64 *)(p->thread.rsp); + do { + if (fp < (unsigned long)stack || + fp > (unsigned long)stack+THREAD_SIZE) + return 0; + rip = *(u64 *)(fp+8); + if (!in_sched_functions(rip)) + return rip; + fp = *(u64 *)fp; + } while (count++ < 16); + return 0; +} + +long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) +{ + int ret = 0; + int doit = task == current; + int cpu; + + switch (code) { + case ARCH_SET_GS: + if (addr >= TASK_SIZE_OF(task)) + return -EPERM; + cpu = get_cpu(); + /* handle small bases via the GDT because that's faster to + switch. */ + if (addr <= 0xffffffff) { + set_32bit_tls(task, GS_TLS, addr); + if (doit) { + load_TLS(&task->thread, cpu); + load_gs_index(GS_TLS_SEL); + } + task->thread.gsindex = GS_TLS_SEL; + task->thread.gs = 0; + } else { + task->thread.gsindex = 0; + task->thread.gs = addr; + if (doit) { + load_gs_index(0); + ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr); + } + } + put_cpu(); + break; + case ARCH_SET_FS: + /* Not strictly needed for fs, but do it for symmetry + with gs */ + if (addr >= TASK_SIZE_OF(task)) + return -EPERM; + cpu = get_cpu(); + /* handle small bases via the GDT because that's faster to + switch. */ + if (addr <= 0xffffffff) { + set_32bit_tls(task, FS_TLS, addr); + if (doit) { + load_TLS(&task->thread, cpu); + asm volatile("movl %0,%%fs" :: "r"(FS_TLS_SEL)); + } + task->thread.fsindex = FS_TLS_SEL; + task->thread.fs = 0; + } else { + task->thread.fsindex = 0; + task->thread.fs = addr; + if (doit) { + /* set the selector to 0 to not confuse + __switch_to */ + asm volatile("movl %0,%%fs" :: "r" (0)); + ret = checking_wrmsrl(MSR_FS_BASE, addr); + } + } + put_cpu(); + break; + case ARCH_GET_FS: { + unsigned long base; + if (task->thread.fsindex == FS_TLS_SEL) + base = read_32bit_tls(task, FS_TLS); + else if (doit) + rdmsrl(MSR_FS_BASE, base); + else + base = task->thread.fs; + ret = put_user(base, (unsigned long __user *)addr); + break; + } + case ARCH_GET_GS: { + unsigned long base; + unsigned gsindex; + if (task->thread.gsindex == GS_TLS_SEL) + base = read_32bit_tls(task, GS_TLS); + else if (doit) { + asm("movl %%gs,%0" : "=r" (gsindex)); + if (gsindex) + rdmsrl(MSR_KERNEL_GS_BASE, base); + else + base = task->thread.gs; + } + else + base = task->thread.gs; + ret = put_user(base, (unsigned long __user *)addr); + break; + } + + default: + ret = -EINVAL; + break; + } + + return ret; +} + +long sys_arch_prctl(int code, unsigned long addr) +{ + return do_arch_prctl(current, code, addr); +} + +/* + * Capture the user space registers if the task is not running (in user space) + */ +int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) +{ + struct pt_regs *pp, ptregs; + + pp = task_pt_regs(tsk); + + ptregs = *pp; + ptregs.cs &= 0xffff; + ptregs.ss &= 0xffff; + + elf_core_copy_regs(regs, &ptregs); + + return 1; +} + +unsigned long arch_align_stack(unsigned long sp) +{ + if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) + sp -= get_random_int() % 8192; + return sp & ~0xf; +} diff --git a/arch/x86/kernel/ptrace_32.c b/arch/x86/kernel/ptrace_32.c new file mode 100644 index 000000000000..7c1b92522e95 --- /dev/null +++ b/arch/x86/kernel/ptrace_32.c @@ -0,0 +1,723 @@ +/* ptrace.c */ +/* By Ross Biro 1/23/92 */ +/* + * Pentium III FXSR, SSE support + * Gareth Hughes <gareth@valinux.com>, May 2000 + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/security.h> +#include <linux/audit.h> +#include <linux/seccomp.h> +#include <linux/signal.h> + +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/i387.h> +#include <asm/debugreg.h> +#include <asm/ldt.h> +#include <asm/desc.h> + +/* + * does not yet catch signals sent when the child dies. + * in exit.c or in signal.c. + */ + +/* + * Determines which flags the user has access to [1 = access, 0 = no access]. + * Prohibits changing ID(21), VIP(20), VIF(19), VM(17), NT(14), IOPL(12-13), IF(9). + * Also masks reserved bits (31-22, 15, 5, 3, 1). + */ +#define FLAG_MASK 0x00050dd5 + +/* set's the trap flag. */ +#define TRAP_FLAG 0x100 + +/* + * Offset of eflags on child stack.. + */ +#define EFL_OFFSET offsetof(struct pt_regs, eflags) + +static inline struct pt_regs *get_child_regs(struct task_struct *task) +{ + void *stack_top = (void *)task->thread.esp0; + return stack_top - sizeof(struct pt_regs); +} + +/* + * This routine will get a word off of the processes privileged stack. + * the offset is bytes into the pt_regs structure on the stack. + * This routine assumes that all the privileged stacks are in our + * data space. + */ +static inline int get_stack_long(struct task_struct *task, int offset) +{ + unsigned char *stack; + + stack = (unsigned char *)task->thread.esp0 - sizeof(struct pt_regs); + stack += offset; + return (*((int *)stack)); +} + +/* + * This routine will put a word on the processes privileged stack. + * the offset is bytes into the pt_regs structure on the stack. + * This routine assumes that all the privileged stacks are in our + * data space. + */ +static inline int put_stack_long(struct task_struct *task, int offset, + unsigned long data) +{ + unsigned char * stack; + + stack = (unsigned char *)task->thread.esp0 - sizeof(struct pt_regs); + stack += offset; + *(unsigned long *) stack = data; + return 0; +} + +static int putreg(struct task_struct *child, + unsigned long regno, unsigned long value) +{ + switch (regno >> 2) { + case GS: + if (value && (value & 3) != 3) + return -EIO; + child->thread.gs = value; + return 0; + case DS: + case ES: + case FS: + if (value && (value & 3) != 3) + return -EIO; + value &= 0xffff; + break; + case SS: + case CS: + if ((value & 3) != 3) + return -EIO; + value &= 0xffff; + break; + case EFL: + value &= FLAG_MASK; + value |= get_stack_long(child, EFL_OFFSET) & ~FLAG_MASK; + break; + } + if (regno > FS*4) + regno -= 1*4; + put_stack_long(child, regno, value); + return 0; +} + +static unsigned long getreg(struct task_struct *child, + unsigned long regno) +{ + unsigned long retval = ~0UL; + + switch (regno >> 2) { + case GS: + retval = child->thread.gs; + break; + case DS: + case ES: + case FS: + case SS: + case CS: + retval = 0xffff; + /* fall through */ + default: + if (regno > FS*4) + regno -= 1*4; + retval &= get_stack_long(child, regno); + } + return retval; +} + +#define LDT_SEGMENT 4 + +static unsigned long convert_eip_to_linear(struct task_struct *child, struct pt_regs *regs) +{ + unsigned long addr, seg; + + addr = regs->eip; + seg = regs->xcs & 0xffff; + if (regs->eflags & VM_MASK) { + addr = (addr & 0xffff) + (seg << 4); + return addr; + } + + /* + * We'll assume that the code segments in the GDT + * are all zero-based. That is largely true: the + * TLS segments are used for data, and the PNPBIOS + * and APM bios ones we just ignore here. + */ + if (seg & LDT_SEGMENT) { + u32 *desc; + unsigned long base; + + seg &= ~7UL; + + down(&child->mm->context.sem); + if (unlikely((seg >> 3) >= child->mm->context.size)) + addr = -1L; /* bogus selector, access would fault */ + else { + desc = child->mm->context.ldt + seg; + base = ((desc[0] >> 16) | + ((desc[1] & 0xff) << 16) | + (desc[1] & 0xff000000)); + + /* 16-bit code segment? */ + if (!((desc[1] >> 22) & 1)) + addr &= 0xffff; + addr += base; + } + up(&child->mm->context.sem); + } + return addr; +} + +static inline int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) +{ + int i, copied; + unsigned char opcode[15]; + unsigned long addr = convert_eip_to_linear(child, regs); + + copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0); + for (i = 0; i < copied; i++) { + switch (opcode[i]) { + /* popf and iret */ + case 0x9d: case 0xcf: + return 1; + /* opcode and address size prefixes */ + case 0x66: case 0x67: + continue; + /* irrelevant prefixes (segment overrides and repeats) */ + case 0x26: case 0x2e: + case 0x36: case 0x3e: + case 0x64: case 0x65: + case 0xf0: case 0xf2: case 0xf3: + continue; + + /* + * pushf: NOTE! We should probably not let + * the user see the TF bit being set. But + * it's more pain than it's worth to avoid + * it, and a debugger could emulate this + * all in user space if it _really_ cares. + */ + case 0x9c: + default: + return 0; + } + } + return 0; +} + +static void set_singlestep(struct task_struct *child) +{ + struct pt_regs *regs = get_child_regs(child); + + /* + * Always set TIF_SINGLESTEP - this guarantees that + * we single-step system calls etc.. This will also + * cause us to set TF when returning to user mode. + */ + set_tsk_thread_flag(child, TIF_SINGLESTEP); + + /* + * If TF was already set, don't do anything else + */ + if (regs->eflags & TRAP_FLAG) + return; + + /* Set TF on the kernel stack.. */ + regs->eflags |= TRAP_FLAG; + + /* + * ..but if TF is changed by the instruction we will trace, + * don't mark it as being "us" that set it, so that we + * won't clear it by hand later. + */ + if (is_setting_trap_flag(child, regs)) + return; + + child->ptrace |= PT_DTRACE; +} + +static void clear_singlestep(struct task_struct *child) +{ + /* Always clear TIF_SINGLESTEP... */ + clear_tsk_thread_flag(child, TIF_SINGLESTEP); + + /* But touch TF only if it was set by us.. */ + if (child->ptrace & PT_DTRACE) { + struct pt_regs *regs = get_child_regs(child); + regs->eflags &= ~TRAP_FLAG; + child->ptrace &= ~PT_DTRACE; + } +} + +/* + * Called by kernel/ptrace.c when detaching.. + * + * Make sure the single step bit is not set. + */ +void ptrace_disable(struct task_struct *child) +{ + clear_singlestep(child); + clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); +} + +/* + * Perform get_thread_area on behalf of the traced child. + */ +static int +ptrace_get_thread_area(struct task_struct *child, + int idx, struct user_desc __user *user_desc) +{ + struct user_desc info; + struct desc_struct *desc; + +/* + * Get the current Thread-Local Storage area: + */ + +#define GET_BASE(desc) ( \ + (((desc)->a >> 16) & 0x0000ffff) | \ + (((desc)->b << 16) & 0x00ff0000) | \ + ( (desc)->b & 0xff000000) ) + +#define GET_LIMIT(desc) ( \ + ((desc)->a & 0x0ffff) | \ + ((desc)->b & 0xf0000) ) + +#define GET_32BIT(desc) (((desc)->b >> 22) & 1) +#define GET_CONTENTS(desc) (((desc)->b >> 10) & 3) +#define GET_WRITABLE(desc) (((desc)->b >> 9) & 1) +#define GET_LIMIT_PAGES(desc) (((desc)->b >> 23) & 1) +#define GET_PRESENT(desc) (((desc)->b >> 15) & 1) +#define GET_USEABLE(desc) (((desc)->b >> 20) & 1) + + if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) + return -EINVAL; + + desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; + + info.entry_number = idx; + info.base_addr = GET_BASE(desc); + info.limit = GET_LIMIT(desc); + info.seg_32bit = GET_32BIT(desc); + info.contents = GET_CONTENTS(desc); + info.read_exec_only = !GET_WRITABLE(desc); + info.limit_in_pages = GET_LIMIT_PAGES(desc); + info.seg_not_present = !GET_PRESENT(desc); + info.useable = GET_USEABLE(desc); + + if (copy_to_user(user_desc, &info, sizeof(info))) + return -EFAULT; + + return 0; +} + +/* + * Perform set_thread_area on behalf of the traced child. + */ +static int +ptrace_set_thread_area(struct task_struct *child, + int idx, struct user_desc __user *user_desc) +{ + struct user_desc info; + struct desc_struct *desc; + + if (copy_from_user(&info, user_desc, sizeof(info))) + return -EFAULT; + + if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) + return -EINVAL; + + desc = child->thread.tls_array + idx - GDT_ENTRY_TLS_MIN; + if (LDT_empty(&info)) { + desc->a = 0; + desc->b = 0; + } else { + desc->a = LDT_entry_a(&info); + desc->b = LDT_entry_b(&info); + } + + return 0; +} + +long arch_ptrace(struct task_struct *child, long request, long addr, long data) +{ + struct user * dummy = NULL; + int i, ret; + unsigned long __user *datap = (unsigned long __user *)data; + + switch (request) { + /* when I and D space are separate, these will need to be fixed. */ + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: + ret = generic_ptrace_peekdata(child, addr, data); + break; + + /* read the word at location addr in the USER area. */ + case PTRACE_PEEKUSR: { + unsigned long tmp; + + ret = -EIO; + if ((addr & 3) || addr < 0 || + addr > sizeof(struct user) - 3) + break; + + tmp = 0; /* Default return condition */ + if(addr < FRAME_SIZE*sizeof(long)) + tmp = getreg(child, addr); + if(addr >= (long) &dummy->u_debugreg[0] && + addr <= (long) &dummy->u_debugreg[7]){ + addr -= (long) &dummy->u_debugreg[0]; + addr = addr >> 2; + tmp = child->thread.debugreg[addr]; + } + ret = put_user(tmp, datap); + break; + } + + /* when I and D space are separate, this will have to be fixed. */ + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + ret = generic_ptrace_pokedata(child, addr, data); + break; + + case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ + ret = -EIO; + if ((addr & 3) || addr < 0 || + addr > sizeof(struct user) - 3) + break; + + if (addr < FRAME_SIZE*sizeof(long)) { + ret = putreg(child, addr, data); + break; + } + /* We need to be very careful here. We implicitly + want to modify a portion of the task_struct, and we + have to be selective about what portions we allow someone + to modify. */ + + ret = -EIO; + if(addr >= (long) &dummy->u_debugreg[0] && + addr <= (long) &dummy->u_debugreg[7]){ + + if(addr == (long) &dummy->u_debugreg[4]) break; + if(addr == (long) &dummy->u_debugreg[5]) break; + if(addr < (long) &dummy->u_debugreg[4] && + ((unsigned long) data) >= TASK_SIZE-3) break; + + /* Sanity-check data. Take one half-byte at once with + * check = (val >> (16 + 4*i)) & 0xf. It contains the + * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits + * 2 and 3 are LENi. Given a list of invalid values, + * we do mask |= 1 << invalid_value, so that + * (mask >> check) & 1 is a correct test for invalid + * values. + * + * R/Wi contains the type of the breakpoint / + * watchpoint, LENi contains the length of the watched + * data in the watchpoint case. + * + * The invalid values are: + * - LENi == 0x10 (undefined), so mask |= 0x0f00. + * - R/Wi == 0x10 (break on I/O reads or writes), so + * mask |= 0x4444. + * - R/Wi == 0x00 && LENi != 0x00, so we have mask |= + * 0x1110. + * + * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54. + * + * See the Intel Manual "System Programming Guide", + * 15.2.4 + * + * Note that LENi == 0x10 is defined on x86_64 in long + * mode (i.e. even for 32-bit userspace software, but + * 64-bit kernel), so the x86_64 mask value is 0x5454. + * See the AMD manual no. 24593 (AMD64 System + * Programming)*/ + + if(addr == (long) &dummy->u_debugreg[7]) { + data &= ~DR_CONTROL_RESERVED; + for(i=0; i<4; i++) + if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1) + goto out_tsk; + if (data) + set_tsk_thread_flag(child, TIF_DEBUG); + else + clear_tsk_thread_flag(child, TIF_DEBUG); + } + addr -= (long) &dummy->u_debugreg; + addr = addr >> 2; + child->thread.debugreg[addr] = data; + ret = 0; + } + break; + + case PTRACE_SYSEMU: /* continue and stop at next syscall, which will not be executed */ + case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ + case PTRACE_CONT: /* restart after signal. */ + ret = -EIO; + if (!valid_signal(data)) + break; + if (request == PTRACE_SYSEMU) { + set_tsk_thread_flag(child, TIF_SYSCALL_EMU); + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + } else if (request == PTRACE_SYSCALL) { + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); + } else { + clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + } + child->exit_code = data; + /* make sure the single step bit is not set. */ + clear_singlestep(child); + wake_up_process(child); + ret = 0; + break; + +/* + * make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to + * exit. + */ + case PTRACE_KILL: + ret = 0; + if (child->exit_state == EXIT_ZOMBIE) /* already dead */ + break; + child->exit_code = SIGKILL; + /* make sure the single step bit is not set. */ + clear_singlestep(child); + wake_up_process(child); + break; + + case PTRACE_SYSEMU_SINGLESTEP: /* Same as SYSEMU, but singlestep if not syscall */ + case PTRACE_SINGLESTEP: /* set the trap flag. */ + ret = -EIO; + if (!valid_signal(data)) + break; + + if (request == PTRACE_SYSEMU_SINGLESTEP) + set_tsk_thread_flag(child, TIF_SYSCALL_EMU); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); + + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + set_singlestep(child); + child->exit_code = data; + /* give it a chance to run. */ + wake_up_process(child); + ret = 0; + break; + + case PTRACE_DETACH: + /* detach a process that was attached. */ + ret = ptrace_detach(child, data); + break; + + case PTRACE_GETREGS: { /* Get all gp regs from the child. */ + if (!access_ok(VERIFY_WRITE, datap, FRAME_SIZE*sizeof(long))) { + ret = -EIO; + break; + } + for ( i = 0; i < FRAME_SIZE*sizeof(long); i += sizeof(long) ) { + __put_user(getreg(child, i), datap); + datap++; + } + ret = 0; + break; + } + + case PTRACE_SETREGS: { /* Set all gp regs in the child. */ + unsigned long tmp; + if (!access_ok(VERIFY_READ, datap, FRAME_SIZE*sizeof(long))) { + ret = -EIO; + break; + } + for ( i = 0; i < FRAME_SIZE*sizeof(long); i += sizeof(long) ) { + __get_user(tmp, datap); + putreg(child, i, tmp); + datap++; + } + ret = 0; + break; + } + + case PTRACE_GETFPREGS: { /* Get the child FPU state. */ + if (!access_ok(VERIFY_WRITE, datap, + sizeof(struct user_i387_struct))) { + ret = -EIO; + break; + } + ret = 0; + if (!tsk_used_math(child)) + init_fpu(child); + get_fpregs((struct user_i387_struct __user *)data, child); + break; + } + + case PTRACE_SETFPREGS: { /* Set the child FPU state. */ + if (!access_ok(VERIFY_READ, datap, + sizeof(struct user_i387_struct))) { + ret = -EIO; + break; + } + set_stopped_child_used_math(child); + set_fpregs(child, (struct user_i387_struct __user *)data); + ret = 0; + break; + } + + case PTRACE_GETFPXREGS: { /* Get the child extended FPU state. */ + if (!access_ok(VERIFY_WRITE, datap, + sizeof(struct user_fxsr_struct))) { + ret = -EIO; + break; + } + if (!tsk_used_math(child)) + init_fpu(child); + ret = get_fpxregs((struct user_fxsr_struct __user *)data, child); + break; + } + + case PTRACE_SETFPXREGS: { /* Set the child extended FPU state. */ + if (!access_ok(VERIFY_READ, datap, + sizeof(struct user_fxsr_struct))) { + ret = -EIO; + break; + } + set_stopped_child_used_math(child); + ret = set_fpxregs(child, (struct user_fxsr_struct __user *)data); + break; + } + + case PTRACE_GET_THREAD_AREA: + ret = ptrace_get_thread_area(child, addr, + (struct user_desc __user *) data); + break; + + case PTRACE_SET_THREAD_AREA: + ret = ptrace_set_thread_area(child, addr, + (struct user_desc __user *) data); + break; + + default: + ret = ptrace_request(child, request, addr, data); + break; + } + out_tsk: + return ret; +} + +void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code) +{ + struct siginfo info; + + tsk->thread.trap_no = 1; + tsk->thread.error_code = error_code; + + memset(&info, 0, sizeof(info)); + info.si_signo = SIGTRAP; + info.si_code = TRAP_BRKPT; + + /* User-mode eip? */ + info.si_addr = user_mode_vm(regs) ? (void __user *) regs->eip : NULL; + + /* Send us the fakey SIGTRAP */ + force_sig_info(SIGTRAP, &info, tsk); +} + +/* notification of system call entry/exit + * - triggered by current->work.syscall_trace + */ +__attribute__((regparm(3))) +int do_syscall_trace(struct pt_regs *regs, int entryexit) +{ + int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU); + /* + * With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall + * interception + */ + int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP); + int ret = 0; + + /* do the secure computing check first */ + if (!entryexit) + secure_computing(regs->orig_eax); + + if (unlikely(current->audit_context)) { + if (entryexit) + audit_syscall_exit(AUDITSC_RESULT(regs->eax), + regs->eax); + /* Debug traps, when using PTRACE_SINGLESTEP, must be sent only + * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is + * not used, entry.S will call us only on syscall exit, not + * entry; so when TIF_SYSCALL_AUDIT is used we must avoid + * calling send_sigtrap() on syscall entry. + * + * Note that when PTRACE_SYSEMU_SINGLESTEP is used, + * is_singlestep is false, despite his name, so we will still do + * the correct thing. + */ + else if (is_singlestep) + goto out; + } + + if (!(current->ptrace & PT_PTRACED)) + goto out; + + /* If a process stops on the 1st tracepoint with SYSCALL_TRACE + * and then is resumed with SYSEMU_SINGLESTEP, it will come in + * here. We have to check this and return */ + if (is_sysemu && entryexit) + return 0; + + /* Fake a debug trap */ + if (is_singlestep) + send_sigtrap(current, regs, 0); + + if (!test_thread_flag(TIF_SYSCALL_TRACE) && !is_sysemu) + goto out; + + /* the 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ + /* Note that the debugger could change the result of test_thread_flag!*/ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80:0)); + + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } + ret = is_sysemu; +out: + if (unlikely(current->audit_context) && !entryexit) + audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_eax, + regs->ebx, regs->ecx, regs->edx, regs->esi); + if (ret == 0) + return 0; + + regs->orig_eax = -1; /* force skip of syscall restarting */ + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->eax), regs->eax); + return 1; +} diff --git a/arch/x86/kernel/ptrace_64.c b/arch/x86/kernel/ptrace_64.c new file mode 100644 index 000000000000..eea3702427b4 --- /dev/null +++ b/arch/x86/kernel/ptrace_64.c @@ -0,0 +1,627 @@ +/* ptrace.c */ +/* By Ross Biro 1/23/92 */ +/* + * Pentium III FXSR, SSE support + * Gareth Hughes <gareth@valinux.com>, May 2000 + * + * x86-64 port 2000-2002 Andi Kleen + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/security.h> +#include <linux/audit.h> +#include <linux/seccomp.h> +#include <linux/signal.h> + +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/i387.h> +#include <asm/debugreg.h> +#include <asm/ldt.h> +#include <asm/desc.h> +#include <asm/proto.h> +#include <asm/ia32.h> + +/* + * does not yet catch signals sent when the child dies. + * in exit.c or in signal.c. + */ + +/* + * Determines which flags the user has access to [1 = access, 0 = no access]. + * Prohibits changing ID(21), VIP(20), VIF(19), VM(17), IOPL(12-13), IF(9). + * Also masks reserved bits (63-22, 15, 5, 3, 1). + */ +#define FLAG_MASK 0x54dd5UL + +/* set's the trap flag. */ +#define TRAP_FLAG 0x100UL + +/* + * eflags and offset of eflags on child stack.. + */ +#define EFLAGS offsetof(struct pt_regs, eflags) +#define EFL_OFFSET ((int)(EFLAGS-sizeof(struct pt_regs))) + +/* + * this routine will get a word off of the processes privileged stack. + * the offset is how far from the base addr as stored in the TSS. + * this routine assumes that all the privileged stacks are in our + * data space. + */ +static inline unsigned long get_stack_long(struct task_struct *task, int offset) +{ + unsigned char *stack; + + stack = (unsigned char *)task->thread.rsp0; + stack += offset; + return (*((unsigned long *)stack)); +} + +/* + * this routine will put a word on the processes privileged stack. + * the offset is how far from the base addr as stored in the TSS. + * this routine assumes that all the privileged stacks are in our + * data space. + */ +static inline long put_stack_long(struct task_struct *task, int offset, + unsigned long data) +{ + unsigned char * stack; + + stack = (unsigned char *) task->thread.rsp0; + stack += offset; + *(unsigned long *) stack = data; + return 0; +} + +#define LDT_SEGMENT 4 + +unsigned long convert_rip_to_linear(struct task_struct *child, struct pt_regs *regs) +{ + unsigned long addr, seg; + + addr = regs->rip; + seg = regs->cs & 0xffff; + + /* + * We'll assume that the code segments in the GDT + * are all zero-based. That is largely true: the + * TLS segments are used for data, and the PNPBIOS + * and APM bios ones we just ignore here. + */ + if (seg & LDT_SEGMENT) { + u32 *desc; + unsigned long base; + + seg &= ~7UL; + + down(&child->mm->context.sem); + if (unlikely((seg >> 3) >= child->mm->context.size)) + addr = -1L; /* bogus selector, access would fault */ + else { + desc = child->mm->context.ldt + seg; + base = ((desc[0] >> 16) | + ((desc[1] & 0xff) << 16) | + (desc[1] & 0xff000000)); + + /* 16-bit code segment? */ + if (!((desc[1] >> 22) & 1)) + addr &= 0xffff; + addr += base; + } + up(&child->mm->context.sem); + } + + return addr; +} + +static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) +{ + int i, copied; + unsigned char opcode[15]; + unsigned long addr = convert_rip_to_linear(child, regs); + + copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0); + for (i = 0; i < copied; i++) { + switch (opcode[i]) { + /* popf and iret */ + case 0x9d: case 0xcf: + return 1; + + /* CHECKME: 64 65 */ + + /* opcode and address size prefixes */ + case 0x66: case 0x67: + continue; + /* irrelevant prefixes (segment overrides and repeats) */ + case 0x26: case 0x2e: + case 0x36: case 0x3e: + case 0x64: case 0x65: + case 0xf2: case 0xf3: + continue; + + case 0x40 ... 0x4f: + if (regs->cs != __USER_CS) + /* 32-bit mode: register increment */ + return 0; + /* 64-bit mode: REX prefix */ + continue; + + /* CHECKME: f2, f3 */ + + /* + * pushf: NOTE! We should probably not let + * the user see the TF bit being set. But + * it's more pain than it's worth to avoid + * it, and a debugger could emulate this + * all in user space if it _really_ cares. + */ + case 0x9c: + default: + return 0; + } + } + return 0; +} + +static void set_singlestep(struct task_struct *child) +{ + struct pt_regs *regs = task_pt_regs(child); + + /* + * Always set TIF_SINGLESTEP - this guarantees that + * we single-step system calls etc.. This will also + * cause us to set TF when returning to user mode. + */ + set_tsk_thread_flag(child, TIF_SINGLESTEP); + + /* + * If TF was already set, don't do anything else + */ + if (regs->eflags & TRAP_FLAG) + return; + + /* Set TF on the kernel stack.. */ + regs->eflags |= TRAP_FLAG; + + /* + * ..but if TF is changed by the instruction we will trace, + * don't mark it as being "us" that set it, so that we + * won't clear it by hand later. + */ + if (is_setting_trap_flag(child, regs)) + return; + + child->ptrace |= PT_DTRACE; +} + +static void clear_singlestep(struct task_struct *child) +{ + /* Always clear TIF_SINGLESTEP... */ + clear_tsk_thread_flag(child, TIF_SINGLESTEP); + + /* But touch TF only if it was set by us.. */ + if (child->ptrace & PT_DTRACE) { + struct pt_regs *regs = task_pt_regs(child); + regs->eflags &= ~TRAP_FLAG; + child->ptrace &= ~PT_DTRACE; + } +} + +/* + * Called by kernel/ptrace.c when detaching.. + * + * Make sure the single step bit is not set. + */ +void ptrace_disable(struct task_struct *child) +{ + clear_singlestep(child); +} + +static int putreg(struct task_struct *child, + unsigned long regno, unsigned long value) +{ + unsigned long tmp; + + switch (regno) { + case offsetof(struct user_regs_struct,fs): + if (value && (value & 3) != 3) + return -EIO; + child->thread.fsindex = value & 0xffff; + return 0; + case offsetof(struct user_regs_struct,gs): + if (value && (value & 3) != 3) + return -EIO; + child->thread.gsindex = value & 0xffff; + return 0; + case offsetof(struct user_regs_struct,ds): + if (value && (value & 3) != 3) + return -EIO; + child->thread.ds = value & 0xffff; + return 0; + case offsetof(struct user_regs_struct,es): + if (value && (value & 3) != 3) + return -EIO; + child->thread.es = value & 0xffff; + return 0; + case offsetof(struct user_regs_struct,ss): + if ((value & 3) != 3) + return -EIO; + value &= 0xffff; + return 0; + case offsetof(struct user_regs_struct,fs_base): + if (value >= TASK_SIZE_OF(child)) + return -EIO; + child->thread.fs = value; + return 0; + case offsetof(struct user_regs_struct,gs_base): + if (value >= TASK_SIZE_OF(child)) + return -EIO; + child->thread.gs = value; + return 0; + case offsetof(struct user_regs_struct, eflags): + value &= FLAG_MASK; + tmp = get_stack_long(child, EFL_OFFSET); + tmp &= ~FLAG_MASK; + value |= tmp; + break; + case offsetof(struct user_regs_struct,cs): + if ((value & 3) != 3) + return -EIO; + value &= 0xffff; + break; + } + put_stack_long(child, regno - sizeof(struct pt_regs), value); + return 0; +} + +static unsigned long getreg(struct task_struct *child, unsigned long regno) +{ + unsigned long val; + switch (regno) { + case offsetof(struct user_regs_struct, fs): + return child->thread.fsindex; + case offsetof(struct user_regs_struct, gs): + return child->thread.gsindex; + case offsetof(struct user_regs_struct, ds): + return child->thread.ds; + case offsetof(struct user_regs_struct, es): + return child->thread.es; + case offsetof(struct user_regs_struct, fs_base): + return child->thread.fs; + case offsetof(struct user_regs_struct, gs_base): + return child->thread.gs; + default: + regno = regno - sizeof(struct pt_regs); + val = get_stack_long(child, regno); + if (test_tsk_thread_flag(child, TIF_IA32)) + val &= 0xffffffff; + return val; + } + +} + +long arch_ptrace(struct task_struct *child, long request, long addr, long data) +{ + long i, ret; + unsigned ui; + + switch (request) { + /* when I and D space are separate, these will need to be fixed. */ + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: + ret = generic_ptrace_peekdata(child, addr, data); + break; + + /* read the word at location addr in the USER area. */ + case PTRACE_PEEKUSR: { + unsigned long tmp; + + ret = -EIO; + if ((addr & 7) || + addr > sizeof(struct user) - 7) + break; + + switch (addr) { + case 0 ... sizeof(struct user_regs_struct) - sizeof(long): + tmp = getreg(child, addr); + break; + case offsetof(struct user, u_debugreg[0]): + tmp = child->thread.debugreg0; + break; + case offsetof(struct user, u_debugreg[1]): + tmp = child->thread.debugreg1; + break; + case offsetof(struct user, u_debugreg[2]): + tmp = child->thread.debugreg2; + break; + case offsetof(struct user, u_debugreg[3]): + tmp = child->thread.debugreg3; + break; + case offsetof(struct user, u_debugreg[6]): + tmp = child->thread.debugreg6; + break; + case offsetof(struct user, u_debugreg[7]): + tmp = child->thread.debugreg7; + break; + default: + tmp = 0; + break; + } + ret = put_user(tmp,(unsigned long __user *) data); + break; + } + + /* when I and D space are separate, this will have to be fixed. */ + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + ret = generic_ptrace_pokedata(child, addr, data); + break; + + case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ + { + int dsize = test_tsk_thread_flag(child, TIF_IA32) ? 3 : 7; + ret = -EIO; + if ((addr & 7) || + addr > sizeof(struct user) - 7) + break; + + switch (addr) { + case 0 ... sizeof(struct user_regs_struct) - sizeof(long): + ret = putreg(child, addr, data); + break; + /* Disallows to set a breakpoint into the vsyscall */ + case offsetof(struct user, u_debugreg[0]): + if (data >= TASK_SIZE_OF(child) - dsize) break; + child->thread.debugreg0 = data; + ret = 0; + break; + case offsetof(struct user, u_debugreg[1]): + if (data >= TASK_SIZE_OF(child) - dsize) break; + child->thread.debugreg1 = data; + ret = 0; + break; + case offsetof(struct user, u_debugreg[2]): + if (data >= TASK_SIZE_OF(child) - dsize) break; + child->thread.debugreg2 = data; + ret = 0; + break; + case offsetof(struct user, u_debugreg[3]): + if (data >= TASK_SIZE_OF(child) - dsize) break; + child->thread.debugreg3 = data; + ret = 0; + break; + case offsetof(struct user, u_debugreg[6]): + if (data >> 32) + break; + child->thread.debugreg6 = data; + ret = 0; + break; + case offsetof(struct user, u_debugreg[7]): + /* See arch/i386/kernel/ptrace.c for an explanation of + * this awkward check.*/ + data &= ~DR_CONTROL_RESERVED; + for(i=0; i<4; i++) + if ((0x5554 >> ((data >> (16 + 4*i)) & 0xf)) & 1) + break; + if (i == 4) { + child->thread.debugreg7 = data; + if (data) + set_tsk_thread_flag(child, TIF_DEBUG); + else + clear_tsk_thread_flag(child, TIF_DEBUG); + ret = 0; + } + break; + } + break; + } + case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ + case PTRACE_CONT: /* restart after signal. */ + + ret = -EIO; + if (!valid_signal(data)) + break; + if (request == PTRACE_SYSCALL) + set_tsk_thread_flag(child,TIF_SYSCALL_TRACE); + else + clear_tsk_thread_flag(child,TIF_SYSCALL_TRACE); + clear_tsk_thread_flag(child, TIF_SINGLESTEP); + child->exit_code = data; + /* make sure the single step bit is not set. */ + clear_singlestep(child); + wake_up_process(child); + ret = 0; + break; + +#ifdef CONFIG_IA32_EMULATION + /* This makes only sense with 32bit programs. Allow a + 64bit debugger to fully examine them too. Better + don't use it against 64bit processes, use + PTRACE_ARCH_PRCTL instead. */ + case PTRACE_SET_THREAD_AREA: { + struct user_desc __user *p; + int old; + p = (struct user_desc __user *)data; + get_user(old, &p->entry_number); + put_user(addr, &p->entry_number); + ret = do_set_thread_area(&child->thread, p); + put_user(old, &p->entry_number); + break; + case PTRACE_GET_THREAD_AREA: + p = (struct user_desc __user *)data; + get_user(old, &p->entry_number); + put_user(addr, &p->entry_number); + ret = do_get_thread_area(&child->thread, p); + put_user(old, &p->entry_number); + break; + } +#endif + /* normal 64bit interface to access TLS data. + Works just like arch_prctl, except that the arguments + are reversed. */ + case PTRACE_ARCH_PRCTL: + ret = do_arch_prctl(child, data, addr); + break; + +/* + * make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to + * exit. + */ + case PTRACE_KILL: + ret = 0; + if (child->exit_state == EXIT_ZOMBIE) /* already dead */ + break; + clear_tsk_thread_flag(child, TIF_SINGLESTEP); + child->exit_code = SIGKILL; + /* make sure the single step bit is not set. */ + clear_singlestep(child); + wake_up_process(child); + break; + + case PTRACE_SINGLESTEP: /* set the trap flag. */ + ret = -EIO; + if (!valid_signal(data)) + break; + clear_tsk_thread_flag(child,TIF_SYSCALL_TRACE); + set_singlestep(child); + child->exit_code = data; + /* give it a chance to run. */ + wake_up_process(child); + ret = 0; + break; + + case PTRACE_DETACH: + /* detach a process that was attached. */ + ret = ptrace_detach(child, data); + break; + + case PTRACE_GETREGS: { /* Get all gp regs from the child. */ + if (!access_ok(VERIFY_WRITE, (unsigned __user *)data, + sizeof(struct user_regs_struct))) { + ret = -EIO; + break; + } + ret = 0; + for (ui = 0; ui < sizeof(struct user_regs_struct); ui += sizeof(long)) { + ret |= __put_user(getreg(child, ui),(unsigned long __user *) data); + data += sizeof(long); + } + break; + } + + case PTRACE_SETREGS: { /* Set all gp regs in the child. */ + unsigned long tmp; + if (!access_ok(VERIFY_READ, (unsigned __user *)data, + sizeof(struct user_regs_struct))) { + ret = -EIO; + break; + } + ret = 0; + for (ui = 0; ui < sizeof(struct user_regs_struct); ui += sizeof(long)) { + ret = __get_user(tmp, (unsigned long __user *) data); + if (ret) + break; + ret = putreg(child, ui, tmp); + if (ret) + break; + data += sizeof(long); + } + break; + } + + case PTRACE_GETFPREGS: { /* Get the child extended FPU state. */ + if (!access_ok(VERIFY_WRITE, (unsigned __user *)data, + sizeof(struct user_i387_struct))) { + ret = -EIO; + break; + } + ret = get_fpregs((struct user_i387_struct __user *)data, child); + break; + } + + case PTRACE_SETFPREGS: { /* Set the child extended FPU state. */ + if (!access_ok(VERIFY_READ, (unsigned __user *)data, + sizeof(struct user_i387_struct))) { + ret = -EIO; + break; + } + set_stopped_child_used_math(child); + ret = set_fpregs(child, (struct user_i387_struct __user *)data); + break; + } + + default: + ret = ptrace_request(child, request, addr, data); + break; + } + return ret; +} + +static void syscall_trace(struct pt_regs *regs) +{ + +#if 0 + printk("trace %s rip %lx rsp %lx rax %d origrax %d caller %lx tiflags %x ptrace %x\n", + current->comm, + regs->rip, regs->rsp, regs->rax, regs->orig_rax, __builtin_return_address(0), + current_thread_info()->flags, current->ptrace); +#endif + + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} + +asmlinkage void syscall_trace_enter(struct pt_regs *regs) +{ + /* do the secure computing check first */ + secure_computing(regs->orig_rax); + + if (test_thread_flag(TIF_SYSCALL_TRACE) + && (current->ptrace & PT_PTRACED)) + syscall_trace(regs); + + if (unlikely(current->audit_context)) { + if (test_thread_flag(TIF_IA32)) { + audit_syscall_entry(AUDIT_ARCH_I386, + regs->orig_rax, + regs->rbx, regs->rcx, + regs->rdx, regs->rsi); + } else { + audit_syscall_entry(AUDIT_ARCH_X86_64, + regs->orig_rax, + regs->rdi, regs->rsi, + regs->rdx, regs->r10); + } + } +} + +asmlinkage void syscall_trace_leave(struct pt_regs *regs) +{ + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->rax), regs->rax); + + if ((test_thread_flag(TIF_SYSCALL_TRACE) + || test_thread_flag(TIF_SINGLESTEP)) + && (current->ptrace & PT_PTRACED)) + syscall_trace(regs); +} diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c new file mode 100644 index 000000000000..6722469c2633 --- /dev/null +++ b/arch/x86/kernel/quirks.c @@ -0,0 +1,49 @@ +/* + * This file contains work-arounds for x86 and x86_64 platform bugs. + */ +#include <linux/pci.h> +#include <linux/irq.h> + +#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI) + +static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) +{ + u8 config, rev; + u32 word; + + /* BIOS may enable hardware IRQ balancing for + * E7520/E7320/E7525(revision ID 0x9 and below) + * based platforms. + * Disable SW irqbalance/affinity on those platforms. + */ + pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev); + if (rev > 0x9) + return; + + /* enable access to config space*/ + pci_read_config_byte(dev, 0xf4, &config); + pci_write_config_byte(dev, 0xf4, config|0x2); + + /* read xTPR register */ + raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word); + + if (!(word & (1 << 13))) { + printk(KERN_INFO "Intel E7520/7320/7525 detected. " + "Disabling irq balancing and affinity\n"); +#ifdef CONFIG_IRQBALANCE + irqbalance_disable(""); +#endif + noirqdebug_setup(""); +#ifdef CONFIG_PROC_FS + no_irq_affinity = 1; +#endif + } + + /* put back the original value for config space*/ + if (!(config & 0x2)) + pci_write_config_byte(dev, 0xf4, config); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_intel_irqbalance); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance); +#endif diff --git a/arch/x86/kernel/reboot_32.c b/arch/x86/kernel/reboot_32.c new file mode 100644 index 000000000000..b37ed226830a --- /dev/null +++ b/arch/x86/kernel/reboot_32.c @@ -0,0 +1,413 @@ +/* + * linux/arch/i386/kernel/reboot.c + */ + +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/mc146818rtc.h> +#include <linux/efi.h> +#include <linux/dmi.h> +#include <linux/ctype.h> +#include <linux/pm.h> +#include <linux/reboot.h> +#include <asm/uaccess.h> +#include <asm/apic.h> +#include <asm/desc.h> +#include "mach_reboot.h" +#include <asm/reboot_fixups.h> +#include <asm/reboot.h> + +/* + * Power off function, if any + */ +void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); + +static int reboot_mode; +static int reboot_thru_bios; + +#ifdef CONFIG_SMP +static int reboot_cpu = -1; +#endif +static int __init reboot_setup(char *str) +{ + while(1) { + switch (*str) { + case 'w': /* "warm" reboot (no memory testing etc) */ + reboot_mode = 0x1234; + break; + case 'c': /* "cold" reboot (with memory testing etc) */ + reboot_mode = 0x0; + break; + case 'b': /* "bios" reboot by jumping through the BIOS */ + reboot_thru_bios = 1; + break; + case 'h': /* "hard" reboot by toggling RESET and/or crashing the CPU */ + reboot_thru_bios = 0; + break; +#ifdef CONFIG_SMP + case 's': /* "smp" reboot by executing reset on BSP or other CPU*/ + if (isdigit(*(str+1))) { + reboot_cpu = (int) (*(str+1) - '0'); + if (isdigit(*(str+2))) + reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0'); + } + /* we will leave sorting out the final value + when we are ready to reboot, since we might not + have set up boot_cpu_id or smp_num_cpu */ + break; +#endif + } + if((str = strchr(str,',')) != NULL) + str++; + else + break; + } + return 1; +} + +__setup("reboot=", reboot_setup); + +/* + * Reboot options and system auto-detection code provided by + * Dell Inc. so their systems "just work". :-) + */ + +/* + * Some machines require the "reboot=b" commandline option, this quirk makes that automatic. + */ +static int __init set_bios_reboot(const struct dmi_system_id *d) +{ + if (!reboot_thru_bios) { + reboot_thru_bios = 1; + printk(KERN_INFO "%s series board detected. Selecting BIOS-method for reboots.\n", d->ident); + } + return 0; +} + +static struct dmi_system_id __initdata reboot_dmi_table[] = { + { /* Handle problems with rebooting on Dell E520's */ + .callback = set_bios_reboot, + .ident = "Dell E520", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM061"), + }, + }, + { /* Handle problems with rebooting on Dell 1300's */ + .callback = set_bios_reboot, + .ident = "Dell PowerEdge 1300", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"), + }, + }, + { /* Handle problems with rebooting on Dell 300's */ + .callback = set_bios_reboot, + .ident = "Dell PowerEdge 300", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"), + }, + }, + { /* Handle problems with rebooting on Dell Optiplex 745's SFF*/ + .callback = set_bios_reboot, + .ident = "Dell OptiPlex 745", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), + DMI_MATCH(DMI_BOARD_NAME, "0WF810"), + }, + }, + { /* Handle problems with rebooting on Dell 2400's */ + .callback = set_bios_reboot, + .ident = "Dell PowerEdge 2400", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"), + }, + }, + { /* Handle problems with rebooting on HP laptops */ + .callback = set_bios_reboot, + .ident = "HP Compaq Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), + }, + }, + { } +}; + +static int __init reboot_init(void) +{ + dmi_check_system(reboot_dmi_table); + return 0; +} + +core_initcall(reboot_init); + +/* The following code and data reboots the machine by switching to real + mode and jumping to the BIOS reset entry point, as if the CPU has + really been reset. The previous version asked the keyboard + controller to pulse the CPU reset line, which is more thorough, but + doesn't work with at least one type of 486 motherboard. It is easy + to stop this code working; hence the copious comments. */ + +static unsigned long long +real_mode_gdt_entries [3] = +{ + 0x0000000000000000ULL, /* Null descriptor */ + 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ + 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ +}; + +static struct Xgt_desc_struct +real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, +real_mode_idt = { 0x3ff, 0 }, +no_idt = { 0, 0 }; + + +/* This is 16-bit protected mode code to disable paging and the cache, + switch to real mode and jump to the BIOS reset code. + + The instruction that switches to real mode by writing to CR0 must be + followed immediately by a far jump instruction, which set CS to a + valid value for real mode, and flushes the prefetch queue to avoid + running instructions that have already been decoded in protected + mode. + + Clears all the flags except ET, especially PG (paging), PE + (protected-mode enable) and TS (task switch for coprocessor state + save). Flushes the TLB after paging has been disabled. Sets CD and + NW, to disable the cache on a 486, and invalidates the cache. This + is more like the state of a 486 after reset. I don't know if + something else should be done for other chips. + + More could be done here to set up the registers as if a CPU reset had + occurred; hopefully real BIOSs don't assume much. */ + +static unsigned char real_mode_switch [] = +{ + 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ + 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ + 0x66, 0x0d, 0x00, 0x00, 0x00, 0x60, /* orl $0x60000000,%eax */ + 0x66, 0x0f, 0x22, 0xc0, /* movl %eax,%cr0 */ + 0x66, 0x0f, 0x22, 0xd8, /* movl %eax,%cr3 */ + 0x66, 0x0f, 0x20, 0xc3, /* movl %cr0,%ebx */ + 0x66, 0x81, 0xe3, 0x00, 0x00, 0x00, 0x60, /* andl $0x60000000,%ebx */ + 0x74, 0x02, /* jz f */ + 0x0f, 0x09, /* wbinvd */ + 0x24, 0x10, /* f: andb $0x10,al */ + 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ +}; +static unsigned char jump_to_bios [] = +{ + 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ +}; + +/* + * Switch to real mode and then execute the code + * specified by the code and length parameters. + * We assume that length will aways be less that 100! + */ +void machine_real_restart(unsigned char *code, int length) +{ + local_irq_disable(); + + /* Write zero to CMOS register number 0x0f, which the BIOS POST + routine will recognize as telling it to do a proper reboot. (Well + that's what this book in front of me says -- it may only apply to + the Phoenix BIOS though, it's not clear). At the same time, + disable NMIs by setting the top bit in the CMOS address register, + as we're about to do peculiar things to the CPU. I'm not sure if + `outb_p' is needed instead of just `outb'. Use it to be on the + safe side. (Yes, CMOS_WRITE does outb_p's. - Paul G.) + */ + + spin_lock(&rtc_lock); + CMOS_WRITE(0x00, 0x8f); + spin_unlock(&rtc_lock); + + /* Remap the kernel at virtual address zero, as well as offset zero + from the kernel segment. This assumes the kernel segment starts at + virtual address PAGE_OFFSET. */ + + memcpy (swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, + sizeof (swapper_pg_dir [0]) * KERNEL_PGD_PTRS); + + /* + * Use `swapper_pg_dir' as our page directory. + */ + load_cr3(swapper_pg_dir); + + /* Write 0x1234 to absolute memory location 0x472. The BIOS reads + this on booting to tell it to "Bypass memory test (also warm + boot)". This seems like a fairly standard thing that gets set by + REBOOT.COM programs, and the previous reset routine did this + too. */ + + *((unsigned short *)0x472) = reboot_mode; + + /* For the switch to real mode, copy some code to low memory. It has + to be in the first 64k because it is running in 16-bit mode, and it + has to have the same physical and virtual address, because it turns + off paging. Copy it near the end of the first page, out of the way + of BIOS variables. */ + + memcpy ((void *) (0x1000 - sizeof (real_mode_switch) - 100), + real_mode_switch, sizeof (real_mode_switch)); + memcpy ((void *) (0x1000 - 100), code, length); + + /* Set up the IDT for real mode. */ + + load_idt(&real_mode_idt); + + /* Set up a GDT from which we can load segment descriptors for real + mode. The GDT is not used in real mode; it is just needed here to + prepare the descriptors. */ + + load_gdt(&real_mode_gdt); + + /* Load the data segment registers, and thus the descriptors ready for + real mode. The base address of each segment is 0x100, 16 times the + selector value being loaded here. This is so that the segment + registers don't have to be reloaded after switching to real mode: + the values are consistent for real mode operation already. */ + + __asm__ __volatile__ ("movl $0x0010,%%eax\n" + "\tmovl %%eax,%%ds\n" + "\tmovl %%eax,%%es\n" + "\tmovl %%eax,%%fs\n" + "\tmovl %%eax,%%gs\n" + "\tmovl %%eax,%%ss" : : : "eax"); + + /* Jump to the 16-bit code that we copied earlier. It disables paging + and the cache, switches to real mode, and jumps to the BIOS reset + entry point. */ + + __asm__ __volatile__ ("ljmp $0x0008,%0" + : + : "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100))); +} +#ifdef CONFIG_APM_MODULE +EXPORT_SYMBOL(machine_real_restart); +#endif + +static void native_machine_shutdown(void) +{ +#ifdef CONFIG_SMP + int reboot_cpu_id; + + /* The boot cpu is always logical cpu 0 */ + reboot_cpu_id = 0; + + /* See if there has been given a command line override */ + if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) && + cpu_isset(reboot_cpu, cpu_online_map)) { + reboot_cpu_id = reboot_cpu; + } + + /* Make certain the cpu I'm rebooting on is online */ + if (!cpu_isset(reboot_cpu_id, cpu_online_map)) { + reboot_cpu_id = smp_processor_id(); + } + + /* Make certain I only run on the appropriate processor */ + set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id)); + + /* O.K. Now that I'm on the appropriate processor, stop + * all of the others, and disable their local APICs. + */ + + smp_send_stop(); +#endif /* CONFIG_SMP */ + + lapic_shutdown(); + +#ifdef CONFIG_X86_IO_APIC + disable_IO_APIC(); +#endif +} + +void __attribute__((weak)) mach_reboot_fixups(void) +{ +} + +static void native_machine_emergency_restart(void) +{ + if (!reboot_thru_bios) { + if (efi_enabled) { + efi.reset_system(EFI_RESET_COLD, EFI_SUCCESS, 0, NULL); + load_idt(&no_idt); + __asm__ __volatile__("int3"); + } + /* rebooting needs to touch the page at absolute addr 0 */ + *((unsigned short *)__va(0x472)) = reboot_mode; + for (;;) { + mach_reboot_fixups(); /* for board specific fixups */ + mach_reboot(); + /* That didn't work - force a triple fault.. */ + load_idt(&no_idt); + __asm__ __volatile__("int3"); + } + } + if (efi_enabled) + efi.reset_system(EFI_RESET_WARM, EFI_SUCCESS, 0, NULL); + + machine_real_restart(jump_to_bios, sizeof(jump_to_bios)); +} + +static void native_machine_restart(char * __unused) +{ + machine_shutdown(); + machine_emergency_restart(); +} + +static void native_machine_halt(void) +{ +} + +static void native_machine_power_off(void) +{ + if (pm_power_off) { + machine_shutdown(); + pm_power_off(); + } +} + + +struct machine_ops machine_ops = { + .power_off = native_machine_power_off, + .shutdown = native_machine_shutdown, + .emergency_restart = native_machine_emergency_restart, + .restart = native_machine_restart, + .halt = native_machine_halt, +}; + +void machine_power_off(void) +{ + machine_ops.power_off(); +} + +void machine_shutdown(void) +{ + machine_ops.shutdown(); +} + +void machine_emergency_restart(void) +{ + machine_ops.emergency_restart(); +} + +void machine_restart(char *cmd) +{ + machine_ops.restart(cmd); +} + +void machine_halt(void) +{ + machine_ops.halt(); +} diff --git a/arch/x86/kernel/reboot_64.c b/arch/x86/kernel/reboot_64.c new file mode 100644 index 000000000000..368db2b9c5ac --- /dev/null +++ b/arch/x86/kernel/reboot_64.c @@ -0,0 +1,171 @@ +/* Various gunk just to reboot the machine. */ +#include <linux/module.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/string.h> +#include <linux/pm.h> +#include <linux/kdebug.h> +#include <linux/sched.h> +#include <asm/io.h> +#include <asm/delay.h> +#include <asm/hw_irq.h> +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/tlbflush.h> +#include <asm/apic.h> +#include <asm/iommu.h> + +/* + * Power off function, if any + */ +void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); + +static long no_idt[3]; +static enum { + BOOT_TRIPLE = 't', + BOOT_KBD = 'k' +} reboot_type = BOOT_KBD; +static int reboot_mode = 0; +int reboot_force; + +/* reboot=t[riple] | k[bd] [, [w]arm | [c]old] + warm Don't set the cold reboot flag + cold Set the cold reboot flag + triple Force a triple fault (init) + kbd Use the keyboard controller. cold reset (default) + force Avoid anything that could hang. + */ +static int __init reboot_setup(char *str) +{ + for (;;) { + switch (*str) { + case 'w': + reboot_mode = 0x1234; + break; + + case 'c': + reboot_mode = 0; + break; + + case 't': + case 'b': + case 'k': + reboot_type = *str; + break; + case 'f': + reboot_force = 1; + break; + } + if((str = strchr(str,',')) != NULL) + str++; + else + break; + } + return 1; +} + +__setup("reboot=", reboot_setup); + +static inline void kb_wait(void) +{ + int i; + + for (i=0; i<0x10000; i++) + if ((inb_p(0x64) & 0x02) == 0) + break; +} + +void machine_shutdown(void) +{ + unsigned long flags; + + /* Stop the cpus and apics */ +#ifdef CONFIG_SMP + int reboot_cpu_id; + + /* The boot cpu is always logical cpu 0 */ + reboot_cpu_id = 0; + + /* Make certain the cpu I'm about to reboot on is online */ + if (!cpu_isset(reboot_cpu_id, cpu_online_map)) { + reboot_cpu_id = smp_processor_id(); + } + + /* Make certain I only run on the appropriate processor */ + set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id)); + + /* O.K Now that I'm on the appropriate processor, + * stop all of the others. + */ + smp_send_stop(); +#endif + + local_irq_save(flags); + +#ifndef CONFIG_SMP + disable_local_APIC(); +#endif + + disable_IO_APIC(); + + local_irq_restore(flags); + + pci_iommu_shutdown(); +} + +void machine_emergency_restart(void) +{ + int i; + + /* Tell the BIOS if we want cold or warm reboot */ + *((unsigned short *)__va(0x472)) = reboot_mode; + + for (;;) { + /* Could also try the reset bit in the Hammer NB */ + switch (reboot_type) { + case BOOT_KBD: + for (i=0; i<10; i++) { + kb_wait(); + udelay(50); + outb(0xfe,0x64); /* pulse reset low */ + udelay(50); + } + + case BOOT_TRIPLE: + __asm__ __volatile__("lidt (%0)": :"r" (&no_idt)); + __asm__ __volatile__("int3"); + + reboot_type = BOOT_KBD; + break; + } + } +} + +void machine_restart(char * __unused) +{ + printk("machine restart\n"); + + if (!reboot_force) { + machine_shutdown(); + } + machine_emergency_restart(); +} + +void machine_halt(void) +{ +} + +void machine_power_off(void) +{ + if (pm_power_off) { + if (!reboot_force) { + machine_shutdown(); + } + pm_power_off(); + } +} + diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c new file mode 100644 index 000000000000..03e1cce58f49 --- /dev/null +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -0,0 +1,68 @@ +/* + * linux/arch/i386/kernel/reboot_fixups.c + * + * This is a good place to put board specific reboot fixups. + * + * List of supported fixups: + * geode-gx1/cs5530a - Jaya Kumar <jayalk@intworks.biz> + * geode-gx/lx/cs5536 - Andres Salomon <dilinger@debian.org> + * + */ + +#include <asm/delay.h> +#include <linux/pci.h> +#include <asm/reboot_fixups.h> +#include <asm/msr.h> + +static void cs5530a_warm_reset(struct pci_dev *dev) +{ + /* writing 1 to the reset control register, 0x44 causes the + cs5530a to perform a system warm reset */ + pci_write_config_byte(dev, 0x44, 0x1); + udelay(50); /* shouldn't get here but be safe and spin-a-while */ + return; +} + +static void cs5536_warm_reset(struct pci_dev *dev) +{ + /* + * 6.6.2.12 Soft Reset (DIVIL_SOFT_RESET) + * writing 1 to the LSB of this MSR causes a hard reset. + */ + wrmsrl(0x51400017, 1ULL); + udelay(50); /* shouldn't get here but be safe and spin a while */ +} + +struct device_fixup { + unsigned int vendor; + unsigned int device; + void (*reboot_fixup)(struct pci_dev *); +}; + +static struct device_fixup fixups_table[] = { +{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, +{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, +}; + +/* + * we see if any fixup is available for our current hardware. if there + * is a fixup, we call it and we expect to never return from it. if we + * do return, we keep looking and then eventually fall back to the + * standard mach_reboot on return. + */ +void mach_reboot_fixups(void) +{ + struct device_fixup *cur; + struct pci_dev *dev; + int i; + + for (i=0; i < ARRAY_SIZE(fixups_table); i++) { + cur = &(fixups_table[i]); + dev = pci_get_device(cur->vendor, cur->device, NULL); + if (!dev) + continue; + + cur->reboot_fixup(dev); + } +} + diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S new file mode 100644 index 000000000000..f151d6fae462 --- /dev/null +++ b/arch/x86/kernel/relocate_kernel_32.S @@ -0,0 +1,252 @@ +/* + * relocate_kernel.S - put the kernel image in place to boot + * Copyright (C) 2002-2004 Eric Biederman <ebiederm@xmission.com> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/linkage.h> +#include <asm/page.h> +#include <asm/kexec.h> + +/* + * Must be relocatable PIC code callable as a C function + */ + +#define PTR(x) (x << 2) +#define PAGE_ALIGNED (1 << PAGE_SHIFT) +#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */ +#define PAE_PGD_ATTR 0x01 /* _PAGE_PRESENT */ + + .text + .align PAGE_ALIGNED + .globl relocate_kernel +relocate_kernel: + movl 8(%esp), %ebp /* list of pages */ + +#ifdef CONFIG_X86_PAE + /* map the control page at its virtual address */ + + movl PTR(VA_PGD)(%ebp), %edi + movl PTR(VA_CONTROL_PAGE)(%ebp), %eax + andl $0xc0000000, %eax + shrl $27, %eax + addl %edi, %eax + + movl PTR(PA_PMD_0)(%ebp), %edx + orl $PAE_PGD_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PMD_0)(%ebp), %edi + movl PTR(VA_CONTROL_PAGE)(%ebp), %eax + andl $0x3fe00000, %eax + shrl $18, %eax + addl %edi, %eax + + movl PTR(PA_PTE_0)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PTE_0)(%ebp), %edi + movl PTR(VA_CONTROL_PAGE)(%ebp), %eax + andl $0x001ff000, %eax + shrl $9, %eax + addl %edi, %eax + + movl PTR(PA_CONTROL_PAGE)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + /* identity map the control page at its physical address */ + + movl PTR(VA_PGD)(%ebp), %edi + movl PTR(PA_CONTROL_PAGE)(%ebp), %eax + andl $0xc0000000, %eax + shrl $27, %eax + addl %edi, %eax + + movl PTR(PA_PMD_1)(%ebp), %edx + orl $PAE_PGD_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PMD_1)(%ebp), %edi + movl PTR(PA_CONTROL_PAGE)(%ebp), %eax + andl $0x3fe00000, %eax + shrl $18, %eax + addl %edi, %eax + + movl PTR(PA_PTE_1)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PTE_1)(%ebp), %edi + movl PTR(PA_CONTROL_PAGE)(%ebp), %eax + andl $0x001ff000, %eax + shrl $9, %eax + addl %edi, %eax + + movl PTR(PA_CONTROL_PAGE)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) +#else + /* map the control page at its virtual address */ + + movl PTR(VA_PGD)(%ebp), %edi + movl PTR(VA_CONTROL_PAGE)(%ebp), %eax + andl $0xffc00000, %eax + shrl $20, %eax + addl %edi, %eax + + movl PTR(PA_PTE_0)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PTE_0)(%ebp), %edi + movl PTR(VA_CONTROL_PAGE)(%ebp), %eax + andl $0x003ff000, %eax + shrl $10, %eax + addl %edi, %eax + + movl PTR(PA_CONTROL_PAGE)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + /* identity map the control page at its physical address */ + + movl PTR(VA_PGD)(%ebp), %edi + movl PTR(PA_CONTROL_PAGE)(%ebp), %eax + andl $0xffc00000, %eax + shrl $20, %eax + addl %edi, %eax + + movl PTR(PA_PTE_1)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) + + movl PTR(VA_PTE_1)(%ebp), %edi + movl PTR(PA_CONTROL_PAGE)(%ebp), %eax + andl $0x003ff000, %eax + shrl $10, %eax + addl %edi, %eax + + movl PTR(PA_CONTROL_PAGE)(%ebp), %edx + orl $PAGE_ATTR, %edx + movl %edx, (%eax) +#endif + +relocate_new_kernel: + /* read the arguments and say goodbye to the stack */ + movl 4(%esp), %ebx /* page_list */ + movl 8(%esp), %ebp /* list of pages */ + movl 12(%esp), %edx /* start address */ + movl 16(%esp), %ecx /* cpu_has_pae */ + + /* zero out flags, and disable interrupts */ + pushl $0 + popfl + + /* get physical address of control page now */ + /* this is impossible after page table switch */ + movl PTR(PA_CONTROL_PAGE)(%ebp), %edi + + /* switch to new set of page tables */ + movl PTR(PA_PGD)(%ebp), %eax + movl %eax, %cr3 + + /* setup a new stack at the end of the physical control page */ + lea 4096(%edi), %esp + + /* jump to identity mapped page */ + movl %edi, %eax + addl $(identity_mapped - relocate_kernel), %eax + pushl %eax + ret + +identity_mapped: + /* store the start address on the stack */ + pushl %edx + + /* Set cr0 to a known state: + * 31 0 == Paging disabled + * 18 0 == Alignment check disabled + * 16 0 == Write protect disabled + * 3 0 == No task switch + * 2 0 == Don't do FP software emulation. + * 0 1 == Proctected mode enabled + */ + movl %cr0, %eax + andl $~((1<<31)|(1<<18)|(1<<16)|(1<<3)|(1<<2)), %eax + orl $(1<<0), %eax + movl %eax, %cr0 + + /* clear cr4 if applicable */ + testl %ecx, %ecx + jz 1f + /* Set cr4 to a known state: + * Setting everything to zero seems safe. + */ + movl %cr4, %eax + andl $0, %eax + movl %eax, %cr4 + + jmp 1f +1: + + /* Flush the TLB (needed?) */ + xorl %eax, %eax + movl %eax, %cr3 + + /* Do the copies */ + movl %ebx, %ecx + jmp 1f + +0: /* top, read another word from the indirection page */ + movl (%ebx), %ecx + addl $4, %ebx +1: + testl $0x1, %ecx /* is it a destination page */ + jz 2f + movl %ecx, %edi + andl $0xfffff000, %edi + jmp 0b +2: + testl $0x2, %ecx /* is it an indirection page */ + jz 2f + movl %ecx, %ebx + andl $0xfffff000, %ebx + jmp 0b +2: + testl $0x4, %ecx /* is it the done indicator */ + jz 2f + jmp 3f +2: + testl $0x8, %ecx /* is it the source indicator */ + jz 0b /* Ignore it otherwise */ + movl %ecx, %esi /* For every source page do a copy */ + andl $0xfffff000, %esi + + movl $1024, %ecx + rep ; movsl + jmp 0b + +3: + + /* To be certain of avoiding problems with self-modifying code + * I need to execute a serializing instruction here. + * So I flush the TLB, it's handy, and not processor dependent. + */ + xorl %eax, %eax + movl %eax, %cr3 + + /* set all of the registers to known values */ + /* leave %esp alone */ + + xorl %eax, %eax + xorl %ebx, %ebx + xorl %ecx, %ecx + xorl %edx, %edx + xorl %esi, %esi + xorl %edi, %edi + xorl %ebp, %ebp + ret diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S new file mode 100644 index 000000000000..14e95872c6a3 --- /dev/null +++ b/arch/x86/kernel/relocate_kernel_64.S @@ -0,0 +1,276 @@ +/* + * relocate_kernel.S - put the kernel image in place to boot + * Copyright (C) 2002-2005 Eric Biederman <ebiederm@xmission.com> + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/linkage.h> +#include <asm/page.h> +#include <asm/kexec.h> + +/* + * Must be relocatable PIC code callable as a C function + */ + +#define PTR(x) (x << 3) +#define PAGE_ALIGNED (1 << PAGE_SHIFT) +#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */ + + .text + .align PAGE_ALIGNED + .code64 + .globl relocate_kernel +relocate_kernel: + /* %rdi indirection_page + * %rsi page_list + * %rdx start address + */ + + /* map the control page at its virtual address */ + + movq $0x0000ff8000000000, %r10 /* mask */ + mov $(39 - 3), %cl /* bits to shift */ + movq PTR(VA_CONTROL_PAGE)(%rsi), %r11 /* address to map */ + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PGD)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PUD_0)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PUD_0)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PMD_0)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PMD_0)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PTE_0)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PTE_0)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + /* identity map the control page at its physical address */ + + movq $0x0000ff8000000000, %r10 /* mask */ + mov $(39 - 3), %cl /* bits to shift */ + movq PTR(PA_CONTROL_PAGE)(%rsi), %r11 /* address to map */ + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PGD)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PUD_1)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PUD_1)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PMD_1)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PMD_1)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_PTE_1)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + + shrq $9, %r10 + sub $9, %cl + + movq %r11, %r9 + andq %r10, %r9 + shrq %cl, %r9 + + movq PTR(VA_PTE_1)(%rsi), %r8 + addq %r8, %r9 + movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 + orq $PAGE_ATTR, %r8 + movq %r8, (%r9) + +relocate_new_kernel: + /* %rdi indirection_page + * %rsi page_list + * %rdx start address + */ + + /* zero out flags, and disable interrupts */ + pushq $0 + popfq + + /* get physical address of control page now */ + /* this is impossible after page table switch */ + movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 + + /* get physical address of page table now too */ + movq PTR(PA_TABLE_PAGE)(%rsi), %rcx + + /* switch to new set of page tables */ + movq PTR(PA_PGD)(%rsi), %r9 + movq %r9, %cr3 + + /* setup a new stack at the end of the physical control page */ + lea 4096(%r8), %rsp + + /* jump to identity mapped page */ + addq $(identity_mapped - relocate_kernel), %r8 + pushq %r8 + ret + +identity_mapped: + /* store the start address on the stack */ + pushq %rdx + + /* Set cr0 to a known state: + * 31 1 == Paging enabled + * 18 0 == Alignment check disabled + * 16 0 == Write protect disabled + * 3 0 == No task switch + * 2 0 == Don't do FP software emulation. + * 0 1 == Proctected mode enabled + */ + movq %cr0, %rax + andq $~((1<<18)|(1<<16)|(1<<3)|(1<<2)), %rax + orl $((1<<31)|(1<<0)), %eax + movq %rax, %cr0 + + /* Set cr4 to a known state: + * 10 0 == xmm exceptions disabled + * 9 0 == xmm registers instructions disabled + * 8 0 == performance monitoring counter disabled + * 7 0 == page global disabled + * 6 0 == machine check exceptions disabled + * 5 1 == physical address extension enabled + * 4 0 == page size extensions disabled + * 3 0 == Debug extensions disabled + * 2 0 == Time stamp disable (disabled) + * 1 0 == Protected mode virtual interrupts disabled + * 0 0 == VME disabled + */ + + movq $((1<<5)), %rax + movq %rax, %cr4 + + jmp 1f +1: + + /* Switch to the identity mapped page tables, + * and flush the TLB. + */ + movq %rcx, %cr3 + + /* Do the copies */ + movq %rdi, %rcx /* Put the page_list in %rcx */ + xorq %rdi, %rdi + xorq %rsi, %rsi + jmp 1f + +0: /* top, read another word for the indirection page */ + + movq (%rbx), %rcx + addq $8, %rbx +1: + testq $0x1, %rcx /* is it a destination page? */ + jz 2f + movq %rcx, %rdi + andq $0xfffffffffffff000, %rdi + jmp 0b +2: + testq $0x2, %rcx /* is it an indirection page? */ + jz 2f + movq %rcx, %rbx + andq $0xfffffffffffff000, %rbx + jmp 0b +2: + testq $0x4, %rcx /* is it the done indicator? */ + jz 2f + jmp 3f +2: + testq $0x8, %rcx /* is it the source indicator? */ + jz 0b /* Ignore it otherwise */ + movq %rcx, %rsi /* For ever source page do a copy */ + andq $0xfffffffffffff000, %rsi + + movq $512, %rcx + rep ; movsq + jmp 0b +3: + + /* To be certain of avoiding problems with self-modifying code + * I need to execute a serializing instruction here. + * So I flush the TLB by reloading %cr3 here, it's handy, + * and not processor dependent. + */ + movq %cr3, %rax + movq %rax, %cr3 + + /* set all of the registers to known values */ + /* leave %rsp alone */ + + xorq %rax, %rax + xorq %rbx, %rbx + xorq %rcx, %rcx + xorq %rdx, %rdx + xorq %rsi, %rsi + xorq %rdi, %rdi + xorq %rbp, %rbp + xorq %r8, %r8 + xorq %r9, %r9 + xorq %r10, %r9 + xorq %r11, %r11 + xorq %r12, %r12 + xorq %r13, %r13 + xorq %r14, %r14 + xorq %r15, %r15 + + ret diff --git a/arch/x86/kernel/scx200_32.c b/arch/x86/kernel/scx200_32.c new file mode 100644 index 000000000000..c7d3df23f589 --- /dev/null +++ b/arch/x86/kernel/scx200_32.c @@ -0,0 +1,131 @@ +/* linux/arch/i386/kernel/scx200.c + + Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> + + National Semiconductor SCx200 support. */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mutex.h> +#include <linux/pci.h> + +#include <linux/scx200.h> +#include <linux/scx200_gpio.h> + +/* Verify that the configuration block really is there */ +#define scx200_cb_probe(base) (inw((base) + SCx200_CBA) == (base)) + +#define NAME "scx200" + +MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); +MODULE_DESCRIPTION("NatSemi SCx200 Driver"); +MODULE_LICENSE("GPL"); + +unsigned scx200_gpio_base = 0; +long scx200_gpio_shadow[2]; + +unsigned scx200_cb_base = 0; + +static struct pci_device_id scx200_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_XBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_XBUS) }, + { }, +}; +MODULE_DEVICE_TABLE(pci,scx200_tbl); + +static int __devinit scx200_probe(struct pci_dev *, const struct pci_device_id *); + +static struct pci_driver scx200_pci_driver = { + .name = "scx200", + .id_table = scx200_tbl, + .probe = scx200_probe, +}; + +static DEFINE_MUTEX(scx200_gpio_config_lock); + +static void __devinit scx200_init_shadow(void) +{ + int bank; + + /* read the current values driven on the GPIO signals */ + for (bank = 0; bank < 2; ++bank) + scx200_gpio_shadow[bank] = inl(scx200_gpio_base + 0x10 * bank); +} + +static int __devinit scx200_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + unsigned base; + + if (pdev->device == PCI_DEVICE_ID_NS_SCx200_BRIDGE || + pdev->device == PCI_DEVICE_ID_NS_SC1100_BRIDGE) { + base = pci_resource_start(pdev, 0); + printk(KERN_INFO NAME ": GPIO base 0x%x\n", base); + + if (request_region(base, SCx200_GPIO_SIZE, "NatSemi SCx200 GPIO") == 0) { + printk(KERN_ERR NAME ": can't allocate I/O for GPIOs\n"); + return -EBUSY; + } + + scx200_gpio_base = base; + scx200_init_shadow(); + + } else { + /* find the base of the Configuration Block */ + if (scx200_cb_probe(SCx200_CB_BASE_FIXED)) { + scx200_cb_base = SCx200_CB_BASE_FIXED; + } else { + pci_read_config_dword(pdev, SCx200_CBA_SCRATCH, &base); + if (scx200_cb_probe(base)) { + scx200_cb_base = base; + } else { + printk(KERN_WARNING NAME ": Configuration Block not found\n"); + return -ENODEV; + } + } + printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base); + } + + return 0; +} + +u32 scx200_gpio_configure(unsigned index, u32 mask, u32 bits) +{ + u32 config, new_config; + + mutex_lock(&scx200_gpio_config_lock); + + outl(index, scx200_gpio_base + 0x20); + config = inl(scx200_gpio_base + 0x24); + + new_config = (config & mask) | bits; + outl(new_config, scx200_gpio_base + 0x24); + + mutex_unlock(&scx200_gpio_config_lock); + + return config; +} + +static int __init scx200_init(void) +{ + printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n"); + + return pci_register_driver(&scx200_pci_driver); +} + +static void __exit scx200_cleanup(void) +{ + pci_unregister_driver(&scx200_pci_driver); + release_region(scx200_gpio_base, SCx200_GPIO_SIZE); +} + +module_init(scx200_init); +module_exit(scx200_cleanup); + +EXPORT_SYMBOL(scx200_gpio_base); +EXPORT_SYMBOL(scx200_gpio_shadow); +EXPORT_SYMBOL(scx200_gpio_configure); +EXPORT_SYMBOL(scx200_cb_base); diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c new file mode 100644 index 000000000000..1200aaac403e --- /dev/null +++ b/arch/x86/kernel/setup64.c @@ -0,0 +1,289 @@ +/* + * X86-64 specific CPU setup. + * Copyright (C) 1995 Linus Torvalds + * Copyright 2001, 2002, 2003 SuSE Labs / Andi Kleen. + * See setup.c for older changelog. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/bootmem.h> +#include <linux/bitops.h> +#include <linux/module.h> +#include <asm/bootsetup.h> +#include <asm/pda.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/desc.h> +#include <asm/atomic.h> +#include <asm/mmu_context.h> +#include <asm/smp.h> +#include <asm/i387.h> +#include <asm/percpu.h> +#include <asm/proto.h> +#include <asm/sections.h> + +char x86_boot_params[BOOT_PARAM_SIZE] __initdata; + +cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; + +struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(_cpu_pda); +struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned; + +struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; + +char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); + +unsigned long __supported_pte_mask __read_mostly = ~0UL; +static int do_not_nx __cpuinitdata = 0; + +/* noexec=on|off +Control non executable mappings for 64bit processes. + +on Enable(default) +off Disable +*/ +static int __init nonx_setup(char *str) +{ + if (!str) + return -EINVAL; + if (!strncmp(str, "on", 2)) { + __supported_pte_mask |= _PAGE_NX; + do_not_nx = 0; + } else if (!strncmp(str, "off", 3)) { + do_not_nx = 1; + __supported_pte_mask &= ~_PAGE_NX; + } + return 0; +} +early_param("noexec", nonx_setup); + +int force_personality32 = 0; + +/* noexec32=on|off +Control non executable heap for 32bit processes. +To control the stack too use noexec=off + +on PROT_READ does not imply PROT_EXEC for 32bit processes +off PROT_READ implies PROT_EXEC (default) +*/ +static int __init nonx32_setup(char *str) +{ + if (!strcmp(str, "on")) + force_personality32 &= ~READ_IMPLIES_EXEC; + else if (!strcmp(str, "off")) + force_personality32 |= READ_IMPLIES_EXEC; + return 1; +} +__setup("noexec32=", nonx32_setup); + +/* + * Great future plan: + * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. + * Always point %gs to its beginning + */ +void __init setup_per_cpu_areas(void) +{ + int i; + unsigned long size; + +#ifdef CONFIG_HOTPLUG_CPU + prefill_possible_map(); +#endif + + /* Copy section for each CPU (we discard the original) */ + size = PERCPU_ENOUGH_ROOM; + + printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size); + for_each_cpu_mask (i, cpu_possible_map) { + char *ptr; + + if (!NODE_DATA(cpu_to_node(i))) { + printk("cpu with no node %d, num_online_nodes %d\n", + i, num_online_nodes()); + ptr = alloc_bootmem_pages(size); + } else { + ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size); + } + if (!ptr) + panic("Cannot allocate cpu data for CPU %d\n", i); + cpu_pda(i)->data_offset = ptr - __per_cpu_start; + memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); + } +} + +void pda_init(int cpu) +{ + struct x8664_pda *pda = cpu_pda(cpu); + + /* Setup up data that may be needed in __get_free_pages early */ + asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0)); + /* Memory clobbers used to order PDA accessed */ + mb(); + wrmsrl(MSR_GS_BASE, pda); + mb(); + + pda->cpunumber = cpu; + pda->irqcount = -1; + pda->kernelstack = + (unsigned long)stack_thread_info() - PDA_STACKOFFSET + THREAD_SIZE; + pda->active_mm = &init_mm; + pda->mmu_state = 0; + + if (cpu == 0) { + /* others are initialized in smpboot.c */ + pda->pcurrent = &init_task; + pda->irqstackptr = boot_cpu_stack; + } else { + pda->irqstackptr = (char *) + __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); + if (!pda->irqstackptr) + panic("cannot allocate irqstack for cpu %d", cpu); + } + + + pda->irqstackptr += IRQSTACKSIZE-64; +} + +char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ] +__attribute__((section(".bss.page_aligned"))); + +extern asmlinkage void ignore_sysret(void); + +/* May not be marked __init: used by software suspend */ +void syscall_init(void) +{ + /* + * LSTAR and STAR live in a bit strange symbiosis. + * They both write to the same internal register. STAR allows to set CS/DS + * but only a 32bit target. LSTAR sets the 64bit rip. + */ + wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); + wrmsrl(MSR_LSTAR, system_call); + wrmsrl(MSR_CSTAR, ignore_sysret); + +#ifdef CONFIG_IA32_EMULATION + syscall32_cpu_init (); +#endif + + /* Flags to clear on syscall */ + wrmsrl(MSR_SYSCALL_MASK, EF_TF|EF_DF|EF_IE|0x3000); +} + +void __cpuinit check_efer(void) +{ + unsigned long efer; + + rdmsrl(MSR_EFER, efer); + if (!(efer & EFER_NX) || do_not_nx) { + __supported_pte_mask &= ~_PAGE_NX; + } +} + +unsigned long kernel_eflags; + +/* + * cpu_init() initializes state that is per-CPU. Some data is already + * initialized (naturally) in the bootstrap process, such as the GDT + * and IDT. We reload them nevertheless, this function acts as a + * 'CPU state barrier', nothing should get across. + * A lot of state is already set up in PDA init. + */ +void __cpuinit cpu_init (void) +{ + int cpu = stack_smp_processor_id(); + struct tss_struct *t = &per_cpu(init_tss, cpu); + struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); + unsigned long v; + char *estacks = NULL; + struct task_struct *me; + int i; + + /* CPU 0 is initialised in head64.c */ + if (cpu != 0) { + pda_init(cpu); + } else + estacks = boot_exception_stacks; + + me = current; + + if (cpu_test_and_set(cpu, cpu_initialized)) + panic("CPU#%d already initialized!\n", cpu); + + printk("Initializing CPU#%d\n", cpu); + + clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); + + /* + * Initialize the per-CPU GDT with the boot GDT, + * and set up the GDT descriptor: + */ + if (cpu) + memcpy(cpu_gdt(cpu), cpu_gdt_table, GDT_SIZE); + + cpu_gdt_descr[cpu].size = GDT_SIZE; + asm volatile("lgdt %0" :: "m" (cpu_gdt_descr[cpu])); + asm volatile("lidt %0" :: "m" (idt_descr)); + + memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); + syscall_init(); + + wrmsrl(MSR_FS_BASE, 0); + wrmsrl(MSR_KERNEL_GS_BASE, 0); + barrier(); + + check_efer(); + + /* + * set up and load the per-CPU TSS + */ + for (v = 0; v < N_EXCEPTION_STACKS; v++) { + static const unsigned int order[N_EXCEPTION_STACKS] = { + [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, + [DEBUG_STACK - 1] = DEBUG_STACK_ORDER + }; + if (cpu) { + estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); + if (!estacks) + panic("Cannot allocate exception stack %ld %d\n", + v, cpu); + } + estacks += PAGE_SIZE << order[v]; + orig_ist->ist[v] = t->ist[v] = (unsigned long)estacks; + } + + t->io_bitmap_base = offsetof(struct tss_struct, io_bitmap); + /* + * <= is required because the CPU will access up to + * 8 bits beyond the end of the IO permission bitmap. + */ + for (i = 0; i <= IO_BITMAP_LONGS; i++) + t->io_bitmap[i] = ~0UL; + + atomic_inc(&init_mm.mm_count); + me->active_mm = &init_mm; + if (me->mm) + BUG(); + enter_lazy_tlb(&init_mm, me); + + set_tss_desc(cpu, t); + load_TR_desc(); + load_LDT(&init_mm.context); + + /* + * Clear all 6 debug registers: + */ + + set_debugreg(0UL, 0); + set_debugreg(0UL, 1); + set_debugreg(0UL, 2); + set_debugreg(0UL, 3); + set_debugreg(0UL, 6); + set_debugreg(0UL, 7); + + fpu_init(); + + raw_local_save_flags(kernel_eflags); +} diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c new file mode 100644 index 000000000000..d474cd639bcb --- /dev/null +++ b/arch/x86/kernel/setup_32.c @@ -0,0 +1,653 @@ +/* + * linux/arch/i386/kernel/setup.c + * + * Copyright (C) 1995 Linus Torvalds + * + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 + * + * Memory region support + * David Parsons <orc@pell.chi.il.us>, July-August 1999 + * + * Added E820 sanitization routine (removes overlapping memory regions); + * Brian Moyle <bmoyle@mvista.com>, February 2001 + * + * Moved CPU detection code to cpu/${cpu}.c + * Patrick Mochel <mochel@osdl.org>, March 2002 + * + * Provisions for empty E820 memory regions (reported by certain BIOSes). + * Alex Achenbach <xela@slit.de>, December 2002. + * + */ + +/* + * This file handles the architecture-dependent parts of initialization + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/mmzone.h> +#include <linux/screen_info.h> +#include <linux/ioport.h> +#include <linux/acpi.h> +#include <linux/apm_bios.h> +#include <linux/initrd.h> +#include <linux/bootmem.h> +#include <linux/seq_file.h> +#include <linux/console.h> +#include <linux/mca.h> +#include <linux/root_dev.h> +#include <linux/highmem.h> +#include <linux/module.h> +#include <linux/efi.h> +#include <linux/init.h> +#include <linux/edd.h> +#include <linux/nodemask.h> +#include <linux/kexec.h> +#include <linux/crash_dump.h> +#include <linux/dmi.h> +#include <linux/pfn.h> + +#include <video/edid.h> + +#include <asm/apic.h> +#include <asm/e820.h> +#include <asm/mpspec.h> +#include <asm/mmzone.h> +#include <asm/setup.h> +#include <asm/arch_hooks.h> +#include <asm/sections.h> +#include <asm/io_apic.h> +#include <asm/ist.h> +#include <asm/io.h> +#include <asm/vmi.h> +#include <setup_arch.h> +#include <bios_ebda.h> + +/* This value is set up by the early boot code to point to the value + immediately after the boot time page tables. It contains a *physical* + address, and must not be in the .bss segment! */ +unsigned long init_pg_tables_end __initdata = ~0UL; + +int disable_pse __devinitdata = 0; + +/* + * Machine setup.. + */ +extern struct resource code_resource; +extern struct resource data_resource; + +/* cpu data as detected by the assembly code in head.S */ +struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; +/* common cpu data for all cpus */ +struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; +EXPORT_SYMBOL(boot_cpu_data); + +unsigned long mmu_cr4_features; + +/* for MCA, but anyone else can use it if they want */ +unsigned int machine_id; +#ifdef CONFIG_MCA +EXPORT_SYMBOL(machine_id); +#endif +unsigned int machine_submodel_id; +unsigned int BIOS_revision; +unsigned int mca_pentium_flag; + +/* Boot loader ID as an integer, for the benefit of proc_dointvec */ +int bootloader_type; + +/* user-defined highmem size */ +static unsigned int highmem_pages = -1; + +/* + * Setup options + */ +struct screen_info screen_info; +EXPORT_SYMBOL(screen_info); +struct apm_info apm_info; +EXPORT_SYMBOL(apm_info); +struct edid_info edid_info; +EXPORT_SYMBOL_GPL(edid_info); +struct ist_info ist_info; +#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \ + defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE) +EXPORT_SYMBOL(ist_info); +#endif + +extern void early_cpu_init(void); +extern int root_mountflags; + +unsigned long saved_videomode; + +#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_PROMPT_FLAG 0x8000 +#define RAMDISK_LOAD_FLAG 0x4000 + +static char __initdata command_line[COMMAND_LINE_SIZE]; + +struct boot_params __initdata boot_params; + +#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) +struct edd edd; +#ifdef CONFIG_EDD_MODULE +EXPORT_SYMBOL(edd); +#endif +/** + * copy_edd() - Copy the BIOS EDD information + * from boot_params into a safe place. + * + */ +static inline void copy_edd(void) +{ + memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature)); + memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info)); + edd.mbr_signature_nr = EDD_MBR_SIG_NR; + edd.edd_info_nr = EDD_NR; +} +#else +static inline void copy_edd(void) +{ +} +#endif + +int __initdata user_defined_memmap = 0; + +/* + * "mem=nopentium" disables the 4MB page tables. + * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM + * to <mem>, overriding the bios size. + * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from + * <start> to <start>+<mem>, overriding the bios size. + * + * HPA tells me bootloaders need to parse mem=, so no new + * option should be mem= [also see Documentation/i386/boot.txt] + */ +static int __init parse_mem(char *arg) +{ + if (!arg) + return -EINVAL; + + if (strcmp(arg, "nopentium") == 0) { + clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability); + disable_pse = 1; + } else { + /* If the user specifies memory size, we + * limit the BIOS-provided memory map to + * that size. exactmap can be used to specify + * the exact map. mem=number can be used to + * trim the existing memory map. + */ + unsigned long long mem_size; + + mem_size = memparse(arg, &arg); + limit_regions(mem_size); + user_defined_memmap = 1; + } + return 0; +} +early_param("mem", parse_mem); + +#ifdef CONFIG_PROC_VMCORE +/* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. + */ +static int __init parse_elfcorehdr(char *arg) +{ + if (!arg) + return -EINVAL; + + elfcorehdr_addr = memparse(arg, &arg); + return 0; +} +early_param("elfcorehdr", parse_elfcorehdr); +#endif /* CONFIG_PROC_VMCORE */ + +/* + * highmem=size forces highmem to be exactly 'size' bytes. + * This works even on boxes that have no highmem otherwise. + * This also works to reduce highmem size on bigger boxes. + */ +static int __init parse_highmem(char *arg) +{ + if (!arg) + return -EINVAL; + + highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT; + return 0; +} +early_param("highmem", parse_highmem); + +/* + * vmalloc=size forces the vmalloc area to be exactly 'size' + * bytes. This can be used to increase (or decrease) the + * vmalloc area - the default is 128m. + */ +static int __init parse_vmalloc(char *arg) +{ + if (!arg) + return -EINVAL; + + __VMALLOC_RESERVE = memparse(arg, &arg); + return 0; +} +early_param("vmalloc", parse_vmalloc); + +/* + * reservetop=size reserves a hole at the top of the kernel address space which + * a hypervisor can load into later. Needed for dynamically loaded hypervisors, + * so relocating the fixmap can be done before paging initialization. + */ +static int __init parse_reservetop(char *arg) +{ + unsigned long address; + + if (!arg) + return -EINVAL; + + address = memparse(arg, &arg); + reserve_top_address(address); + return 0; +} +early_param("reservetop", parse_reservetop); + +/* + * Determine low and high memory ranges: + */ +unsigned long __init find_max_low_pfn(void) +{ + unsigned long max_low_pfn; + + max_low_pfn = max_pfn; + if (max_low_pfn > MAXMEM_PFN) { + if (highmem_pages == -1) + highmem_pages = max_pfn - MAXMEM_PFN; + if (highmem_pages + MAXMEM_PFN < max_pfn) + max_pfn = MAXMEM_PFN + highmem_pages; + if (highmem_pages + MAXMEM_PFN > max_pfn) { + printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages)); + highmem_pages = 0; + } + max_low_pfn = MAXMEM_PFN; +#ifndef CONFIG_HIGHMEM + /* Maximum memory usable is what is directly addressable */ + printk(KERN_WARNING "Warning only %ldMB will be used.\n", + MAXMEM>>20); + if (max_pfn > MAX_NONPAE_PFN) + printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n"); + else + printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n"); + max_pfn = MAXMEM_PFN; +#else /* !CONFIG_HIGHMEM */ +#ifndef CONFIG_HIGHMEM64G + if (max_pfn > MAX_NONPAE_PFN) { + max_pfn = MAX_NONPAE_PFN; + printk(KERN_WARNING "Warning only 4GB will be used.\n"); + printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n"); + } +#endif /* !CONFIG_HIGHMEM64G */ +#endif /* !CONFIG_HIGHMEM */ + } else { + if (highmem_pages == -1) + highmem_pages = 0; +#ifdef CONFIG_HIGHMEM + if (highmem_pages >= max_pfn) { + printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn)); + highmem_pages = 0; + } + if (highmem_pages) { + if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){ + printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages)); + highmem_pages = 0; + } + max_low_pfn -= highmem_pages; + } +#else + if (highmem_pages) + printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n"); +#endif + } + return max_low_pfn; +} + +/* + * workaround for Dell systems that neglect to reserve EBDA + */ +static void __init reserve_ebda_region(void) +{ + unsigned int addr; + addr = get_bios_ebda(); + if (addr) + reserve_bootmem(addr, PAGE_SIZE); +} + +#ifndef CONFIG_NEED_MULTIPLE_NODES +void __init setup_bootmem_allocator(void); +static unsigned long __init setup_memory(void) +{ + /* + * partially used pages are not usable - thus + * we are rounding upwards: + */ + min_low_pfn = PFN_UP(init_pg_tables_end); + + find_max_pfn(); + + max_low_pfn = find_max_low_pfn(); + +#ifdef CONFIG_HIGHMEM + highstart_pfn = highend_pfn = max_pfn; + if (max_pfn > max_low_pfn) { + highstart_pfn = max_low_pfn; + } + printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", + pages_to_mb(highend_pfn - highstart_pfn)); + num_physpages = highend_pfn; + high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1; +#else + num_physpages = max_low_pfn; + high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1; +#endif +#ifdef CONFIG_FLATMEM + max_mapnr = num_physpages; +#endif + printk(KERN_NOTICE "%ldMB LOWMEM available.\n", + pages_to_mb(max_low_pfn)); + + setup_bootmem_allocator(); + + return max_low_pfn; +} + +void __init zone_sizes_init(void) +{ + unsigned long max_zone_pfns[MAX_NR_ZONES]; + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); + max_zone_pfns[ZONE_DMA] = + virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; + max_zone_pfns[ZONE_NORMAL] = max_low_pfn; +#ifdef CONFIG_HIGHMEM + max_zone_pfns[ZONE_HIGHMEM] = highend_pfn; + add_active_range(0, 0, highend_pfn); +#else + add_active_range(0, 0, max_low_pfn); +#endif + + free_area_init_nodes(max_zone_pfns); +} +#else +extern unsigned long __init setup_memory(void); +extern void zone_sizes_init(void); +#endif /* !CONFIG_NEED_MULTIPLE_NODES */ + +void __init setup_bootmem_allocator(void) +{ + unsigned long bootmap_size; + /* + * Initialize the boot-time allocator (with low memory only): + */ + bootmap_size = init_bootmem(min_low_pfn, max_low_pfn); + + register_bootmem_low_pages(max_low_pfn); + + /* + * Reserve the bootmem bitmap itself as well. We do this in two + * steps (first step was init_bootmem()) because this catches + * the (very unlikely) case of us accidentally initializing the + * bootmem allocator with an invalid RAM area. + */ + reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) + + bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text)); + + /* + * reserve physical page 0 - it's a special BIOS page on many boxes, + * enabling clean reboots, SMP operation, laptop functions. + */ + reserve_bootmem(0, PAGE_SIZE); + + /* reserve EBDA region, it's a 4K region */ + reserve_ebda_region(); + + /* could be an AMD 768MPX chipset. Reserve a page before VGA to prevent + PCI prefetch into it (errata #56). Usually the page is reserved anyways, + unless you have no PS/2 mouse plugged in. */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + boot_cpu_data.x86 == 6) + reserve_bootmem(0xa0000 - 4096, 4096); + +#ifdef CONFIG_SMP + /* + * But first pinch a few for the stack/trampoline stuff + * FIXME: Don't need the extra page at 4K, but need to fix + * trampoline before removing it. (see the GDT stuff) + */ + reserve_bootmem(PAGE_SIZE, PAGE_SIZE); +#endif +#ifdef CONFIG_ACPI_SLEEP + /* + * Reserve low memory region for sleep support. + */ + acpi_reserve_bootmem(); +#endif +#ifdef CONFIG_X86_FIND_SMP_CONFIG + /* + * Find and reserve possible boot-time SMP configuration: + */ + find_smp_config(); +#endif + numa_kva_reserve(); +#ifdef CONFIG_BLK_DEV_INITRD + if (LOADER_TYPE && INITRD_START) { + if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) { + reserve_bootmem(INITRD_START, INITRD_SIZE); + initrd_start = INITRD_START + PAGE_OFFSET; + initrd_end = initrd_start+INITRD_SIZE; + } + else { + printk(KERN_ERR "initrd extends beyond end of memory " + "(0x%08lx > 0x%08lx)\ndisabling initrd\n", + INITRD_START + INITRD_SIZE, + max_low_pfn << PAGE_SHIFT); + initrd_start = 0; + } + } +#endif +#ifdef CONFIG_KEXEC + if (crashk_res.start != crashk_res.end) + reserve_bootmem(crashk_res.start, + crashk_res.end - crashk_res.start + 1); +#endif +} + +/* + * The node 0 pgdat is initialized before all of these because + * it's needed for bootmem. node>0 pgdats have their virtual + * space allocated before the pagetables are in place to access + * them, so they can't be cleared then. + * + * This should all compile down to nothing when NUMA is off. + */ +static void __init remapped_pgdat_init(void) +{ + int nid; + + for_each_online_node(nid) { + if (nid != 0) + memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); + } +} + +#ifdef CONFIG_MCA +static void set_mca_bus(int x) +{ + MCA_bus = x; +} +#else +static void set_mca_bus(int x) { } +#endif + +/* Overridden in paravirt.c if CONFIG_PARAVIRT */ +char * __init __attribute__((weak)) memory_setup(void) +{ + return machine_specific_memory_setup(); +} + +/* + * Determine if we were loaded by an EFI loader. If so, then we have also been + * passed the efi memmap, systab, etc., so we should use these data structures + * for initialization. Note, the efi init code path is determined by the + * global efi_enabled. This allows the same kernel image to be used on existing + * systems (with a traditional BIOS) as well as on EFI systems. + */ +void __init setup_arch(char **cmdline_p) +{ + unsigned long max_low_pfn; + + memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); + pre_setup_arch_hook(); + early_cpu_init(); + + /* + * FIXME: This isn't an official loader_type right + * now but does currently work with elilo. + * If we were configured as an EFI kernel, check to make + * sure that we were loaded correctly from elilo and that + * the system table is valid. If not, then initialize normally. + */ +#ifdef CONFIG_EFI + if ((LOADER_TYPE == 0x50) && EFI_SYSTAB) + efi_enabled = 1; +#endif + + ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); + screen_info = SCREEN_INFO; + edid_info = EDID_INFO; + apm_info.bios = APM_BIOS_INFO; + ist_info = IST_INFO; + saved_videomode = VIDEO_MODE; + if( SYS_DESC_TABLE.length != 0 ) { + set_mca_bus(SYS_DESC_TABLE.table[3] & 0x2); + machine_id = SYS_DESC_TABLE.table[0]; + machine_submodel_id = SYS_DESC_TABLE.table[1]; + BIOS_revision = SYS_DESC_TABLE.table[2]; + } + bootloader_type = LOADER_TYPE; + +#ifdef CONFIG_BLK_DEV_RAM + rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; + rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); + rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0); +#endif + ARCH_SETUP + if (efi_enabled) + efi_init(); + else { + printk(KERN_INFO "BIOS-provided physical RAM map:\n"); + print_memory_map(memory_setup()); + } + + copy_edd(); + + if (!MOUNT_ROOT_RDONLY) + root_mountflags &= ~MS_RDONLY; + init_mm.start_code = (unsigned long) _text; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; + init_mm.brk = init_pg_tables_end + PAGE_OFFSET; + + code_resource.start = virt_to_phys(_text); + code_resource.end = virt_to_phys(_etext)-1; + data_resource.start = virt_to_phys(_etext); + data_resource.end = virt_to_phys(_edata)-1; + + parse_early_param(); + + if (user_defined_memmap) { + printk(KERN_INFO "user-defined physical RAM map:\n"); + print_memory_map("user"); + } + + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + + max_low_pfn = setup_memory(); + +#ifdef CONFIG_VMI + /* + * Must be after max_low_pfn is determined, and before kernel + * pagetables are setup. + */ + vmi_init(); +#endif + + /* + * NOTE: before this point _nobody_ is allowed to allocate + * any memory using the bootmem allocator. Although the + * alloctor is now initialised only the first 8Mb of the kernel + * virtual address space has been mapped. All allocations before + * paging_init() has completed must use the alloc_bootmem_low_pages() + * variant (which allocates DMA'able memory) and care must be taken + * not to exceed the 8Mb limit. + */ + +#ifdef CONFIG_SMP + smp_alloc_memory(); /* AP processor realmode stacks in low memory*/ +#endif + paging_init(); + remapped_pgdat_init(); + sparse_init(); + zone_sizes_init(); + + /* + * NOTE: at this point the bootmem allocator is fully available. + */ + + paravirt_post_allocator_init(); + + dmi_scan_machine(); + +#ifdef CONFIG_X86_GENERICARCH + generic_apic_probe(); +#endif + if (efi_enabled) + efi_map_memmap(); + +#ifdef CONFIG_ACPI + /* + * Parse the ACPI tables for possible boot-time SMP configuration. + */ + acpi_boot_table_init(); +#endif + +#ifdef CONFIG_PCI +#ifdef CONFIG_X86_IO_APIC + check_acpi_pci(); /* Checks more than just ACPI actually */ +#endif +#endif + +#ifdef CONFIG_ACPI + acpi_boot_init(); + +#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) + if (def_to_bigsmp) + printk(KERN_WARNING "More than 8 CPUs detected and " + "CONFIG_X86_PC cannot handle it.\nUse " + "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n"); +#endif +#endif +#ifdef CONFIG_X86_LOCAL_APIC + if (smp_found_config) + get_smp_config(); +#endif + + e820_register_memory(); + e820_mark_nosave_regions(); + +#ifdef CONFIG_VT +#if defined(CONFIG_VGA_CONSOLE) + if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY)) + conswitchp = &vga_con; +#elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +#endif +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c new file mode 100644 index 000000000000..af838f6b0b7f --- /dev/null +++ b/arch/x86/kernel/setup_64.c @@ -0,0 +1,1117 @@ +/* + * linux/arch/x86-64/kernel/setup.c + * + * Copyright (C) 1995 Linus Torvalds + * + * Nov 2001 Dave Jones <davej@suse.de> + * Forked from i386 setup code. + */ + +/* + * This file handles the architecture-dependent parts of initialization + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/a.out.h> +#include <linux/screen_info.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/initrd.h> +#include <linux/highmem.h> +#include <linux/bootmem.h> +#include <linux/module.h> +#include <asm/processor.h> +#include <linux/console.h> +#include <linux/seq_file.h> +#include <linux/crash_dump.h> +#include <linux/root_dev.h> +#include <linux/pci.h> +#include <linux/acpi.h> +#include <linux/kallsyms.h> +#include <linux/edd.h> +#include <linux/mmzone.h> +#include <linux/kexec.h> +#include <linux/cpufreq.h> +#include <linux/dmi.h> +#include <linux/dma-mapping.h> +#include <linux/ctype.h> + +#include <asm/mtrr.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/msr.h> +#include <asm/desc.h> +#include <video/edid.h> +#include <asm/e820.h> +#include <asm/dma.h> +#include <asm/mpspec.h> +#include <asm/mmu_context.h> +#include <asm/bootsetup.h> +#include <asm/proto.h> +#include <asm/setup.h> +#include <asm/mach_apic.h> +#include <asm/numa.h> +#include <asm/sections.h> +#include <asm/dmi.h> + +/* + * Machine setup.. + */ + +struct cpuinfo_x86 boot_cpu_data __read_mostly; +EXPORT_SYMBOL(boot_cpu_data); + +unsigned long mmu_cr4_features; + +/* Boot loader ID as an integer, for the benefit of proc_dointvec */ +int bootloader_type; + +unsigned long saved_video_mode; + +int force_mwait __cpuinitdata; + +/* + * Early DMI memory + */ +int dmi_alloc_index; +char dmi_alloc_data[DMI_MAX_DATA]; + +/* + * Setup options + */ +struct screen_info screen_info; +EXPORT_SYMBOL(screen_info); +struct sys_desc_table_struct { + unsigned short length; + unsigned char table[0]; +}; + +struct edid_info edid_info; +EXPORT_SYMBOL_GPL(edid_info); + +extern int root_mountflags; + +char __initdata command_line[COMMAND_LINE_SIZE]; + +struct resource standard_io_resources[] = { + { .name = "dma1", .start = 0x00, .end = 0x1f, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "pic1", .start = 0x20, .end = 0x21, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "timer0", .start = 0x40, .end = 0x43, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "timer1", .start = 0x50, .end = 0x53, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "keyboard", .start = 0x60, .end = 0x6f, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "dma page reg", .start = 0x80, .end = 0x8f, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "pic2", .start = 0xa0, .end = 0xa1, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "dma2", .start = 0xc0, .end = 0xdf, + .flags = IORESOURCE_BUSY | IORESOURCE_IO }, + { .name = "fpu", .start = 0xf0, .end = 0xff, + .flags = IORESOURCE_BUSY | IORESOURCE_IO } +}; + +#define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM) + +struct resource data_resource = { + .name = "Kernel data", + .start = 0, + .end = 0, + .flags = IORESOURCE_RAM, +}; +struct resource code_resource = { + .name = "Kernel code", + .start = 0, + .end = 0, + .flags = IORESOURCE_RAM, +}; + +#ifdef CONFIG_PROC_VMCORE +/* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. This option will be passed + * by kexec loader to the capture kernel. + */ +static int __init setup_elfcorehdr(char *arg) +{ + char *end; + if (!arg) + return -EINVAL; + elfcorehdr_addr = memparse(arg, &end); + return end > arg ? 0 : -EINVAL; +} +early_param("elfcorehdr", setup_elfcorehdr); +#endif + +#ifndef CONFIG_NUMA +static void __init +contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn) +{ + unsigned long bootmap_size, bootmap; + + bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT; + bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size); + if (bootmap == -1L) + panic("Cannot find bootmem map of size %ld\n",bootmap_size); + bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn); + e820_register_active_regions(0, start_pfn, end_pfn); + free_bootmem_with_active_regions(0, end_pfn); + reserve_bootmem(bootmap, bootmap_size); +} +#endif + +#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) +struct edd edd; +#ifdef CONFIG_EDD_MODULE +EXPORT_SYMBOL(edd); +#endif +/** + * copy_edd() - Copy the BIOS EDD information + * from boot_params into a safe place. + * + */ +static inline void copy_edd(void) +{ + memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature)); + memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info)); + edd.mbr_signature_nr = EDD_MBR_SIG_NR; + edd.edd_info_nr = EDD_NR; +} +#else +static inline void copy_edd(void) +{ +} +#endif + +#define EBDA_ADDR_POINTER 0x40E + +unsigned __initdata ebda_addr; +unsigned __initdata ebda_size; + +static void discover_ebda(void) +{ + /* + * there is a real-mode segmented pointer pointing to the + * 4K EBDA area at 0x40E + */ + ebda_addr = *(unsigned short *)__va(EBDA_ADDR_POINTER); + ebda_addr <<= 4; + + ebda_size = *(unsigned short *)__va(ebda_addr); + + /* Round EBDA up to pages */ + if (ebda_size == 0) + ebda_size = 1; + ebda_size <<= 10; + ebda_size = round_up(ebda_size + (ebda_addr & ~PAGE_MASK), PAGE_SIZE); + if (ebda_size > 64*1024) + ebda_size = 64*1024; +} + +void __init setup_arch(char **cmdline_p) +{ + printk(KERN_INFO "Command line: %s\n", boot_command_line); + + ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); + screen_info = SCREEN_INFO; + edid_info = EDID_INFO; + saved_video_mode = SAVED_VIDEO_MODE; + bootloader_type = LOADER_TYPE; + +#ifdef CONFIG_BLK_DEV_RAM + rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; + rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); + rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0); +#endif + setup_memory_region(); + copy_edd(); + + if (!MOUNT_ROOT_RDONLY) + root_mountflags &= ~MS_RDONLY; + init_mm.start_code = (unsigned long) &_text; + init_mm.end_code = (unsigned long) &_etext; + init_mm.end_data = (unsigned long) &_edata; + init_mm.brk = (unsigned long) &_end; + + code_resource.start = virt_to_phys(&_text); + code_resource.end = virt_to_phys(&_etext)-1; + data_resource.start = virt_to_phys(&_etext); + data_resource.end = virt_to_phys(&_edata)-1; + + early_identify_cpu(&boot_cpu_data); + + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + + parse_early_param(); + + finish_e820_parsing(); + + e820_register_active_regions(0, 0, -1UL); + /* + * partially used pages are not usable - thus + * we are rounding upwards: + */ + end_pfn = e820_end_of_ram(); + num_physpages = end_pfn; + + check_efer(); + + discover_ebda(); + + init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT)); + + dmi_scan_machine(); + +#ifdef CONFIG_ACPI + /* + * Initialize the ACPI boot-time table parser (gets the RSDP and SDT). + * Call this early for SRAT node setup. + */ + acpi_boot_table_init(); +#endif + + /* How many end-of-memory variables you have, grandma! */ + max_low_pfn = end_pfn; + max_pfn = end_pfn; + high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1; + + /* Remove active ranges so rediscovery with NUMA-awareness happens */ + remove_all_active_ranges(); + +#ifdef CONFIG_ACPI_NUMA + /* + * Parse SRAT to discover nodes. + */ + acpi_numa_init(); +#endif + +#ifdef CONFIG_NUMA + numa_initmem_init(0, end_pfn); +#else + contig_initmem_init(0, end_pfn); +#endif + + /* Reserve direct mapping */ + reserve_bootmem_generic(table_start << PAGE_SHIFT, + (table_end - table_start) << PAGE_SHIFT); + + /* reserve kernel */ + reserve_bootmem_generic(__pa_symbol(&_text), + __pa_symbol(&_end) - __pa_symbol(&_text)); + + /* + * reserve physical page 0 - it's a special BIOS page on many boxes, + * enabling clean reboots, SMP operation, laptop functions. + */ + reserve_bootmem_generic(0, PAGE_SIZE); + + /* reserve ebda region */ + if (ebda_addr) + reserve_bootmem_generic(ebda_addr, ebda_size); +#ifdef CONFIG_NUMA + /* reserve nodemap region */ + if (nodemap_addr) + reserve_bootmem_generic(nodemap_addr, nodemap_size); +#endif + +#ifdef CONFIG_SMP + /* Reserve SMP trampoline */ + reserve_bootmem_generic(SMP_TRAMPOLINE_BASE, 2*PAGE_SIZE); +#endif + +#ifdef CONFIG_ACPI_SLEEP + /* + * Reserve low memory region for sleep support. + */ + acpi_reserve_bootmem(); +#endif + /* + * Find and reserve possible boot-time SMP configuration: + */ + find_smp_config(); +#ifdef CONFIG_BLK_DEV_INITRD + if (LOADER_TYPE && INITRD_START) { + if (INITRD_START + INITRD_SIZE <= (end_pfn << PAGE_SHIFT)) { + reserve_bootmem_generic(INITRD_START, INITRD_SIZE); + initrd_start = INITRD_START + PAGE_OFFSET; + initrd_end = initrd_start+INITRD_SIZE; + } + else { + printk(KERN_ERR "initrd extends beyond end of memory " + "(0x%08lx > 0x%08lx)\ndisabling initrd\n", + (unsigned long)(INITRD_START + INITRD_SIZE), + (unsigned long)(end_pfn << PAGE_SHIFT)); + initrd_start = 0; + } + } +#endif +#ifdef CONFIG_KEXEC + if (crashk_res.start != crashk_res.end) { + reserve_bootmem_generic(crashk_res.start, + crashk_res.end - crashk_res.start + 1); + } +#endif + + paging_init(); + +#ifdef CONFIG_PCI + early_quirks(); +#endif + + /* + * set this early, so we dont allocate cpu0 + * if MADT list doesnt list BSP first + * mpparse.c/MP_processor_info() allocates logical cpu numbers. + */ + cpu_set(0, cpu_present_map); +#ifdef CONFIG_ACPI + /* + * Read APIC and some other early information from ACPI tables. + */ + acpi_boot_init(); +#endif + + init_cpu_to_node(); + + /* + * get boot-time SMP configuration: + */ + if (smp_found_config) + get_smp_config(); + init_apic_mappings(); + + /* + * We trust e820 completely. No explicit ROM probing in memory. + */ + e820_reserve_resources(); + e820_mark_nosave_regions(); + + { + unsigned i; + /* request I/O space for devices used on all i[345]86 PCs */ + for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) + request_resource(&ioport_resource, &standard_io_resources[i]); + } + + e820_setup_gap(); + +#ifdef CONFIG_VT +#if defined(CONFIG_VGA_CONSOLE) + conswitchp = &vga_con; +#elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +#endif +} + +static int __cpuinit get_model_name(struct cpuinfo_x86 *c) +{ + unsigned int *v; + + if (c->extended_cpuid_level < 0x80000004) + return 0; + + v = (unsigned int *) c->x86_model_id; + cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); + cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); + cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); + c->x86_model_id[48] = 0; + return 1; +} + + +static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) +{ + unsigned int n, dummy, eax, ebx, ecx, edx; + + n = c->extended_cpuid_level; + + if (n >= 0x80000005) { + cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); + printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", + edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); + c->x86_cache_size=(ecx>>24)+(edx>>24); + /* On K8 L1 TLB is inclusive, so don't count it */ + c->x86_tlbsize = 0; + } + + if (n >= 0x80000006) { + cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); + ecx = cpuid_ecx(0x80000006); + c->x86_cache_size = ecx >> 16; + c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); + + printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", + c->x86_cache_size, ecx & 0xFF); + } + + if (n >= 0x80000007) + cpuid(0x80000007, &dummy, &dummy, &dummy, &c->x86_power); + if (n >= 0x80000008) { + cpuid(0x80000008, &eax, &dummy, &dummy, &dummy); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } +} + +#ifdef CONFIG_NUMA +static int nearby_node(int apicid) +{ + int i; + for (i = apicid - 1; i >= 0; i--) { + int node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + int node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __init amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits; +#ifdef CONFIG_NUMA + int cpu = smp_processor_id(); + int node = 0; + unsigned apicid = hard_smp_processor_id(); +#endif + unsigned ecx = cpuid_ecx(0x80000008); + + c->x86_max_cores = (ecx & 0xff) + 1; + + /* CPU telling us the core id bits shift? */ + bits = (ecx >> 12) & 0xF; + + /* Otherwise recompute */ + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + + /* Low order bits define the core id (index of core in socket) */ + c->cpu_core_id = c->phys_proc_id & ((1 << bits)-1); + /* Convert the APIC ID into the socket ID */ + c->phys_proc_id = phys_pkg_id(bits); + +#ifdef CONFIG_NUMA + node = c->phys_proc_id; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + int ht_nodeid = apicid - (cpu_data[0].phys_proc_id << bits); + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); + } + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +#endif +} + +static void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ + unsigned level; + +#ifdef CONFIG_SMP + unsigned long value; + + /* + * Disable TLB flush filter by setting HWCR.FFDIS on K8 + * bit 6 of msr C001_0015 + * + * Errata 63 for SH-B3 steppings + * Errata 122 for all steppings (F+ have it disabled by default) + */ + if (c->x86 == 15) { + rdmsrl(MSR_K8_HWCR, value); + value |= 1 << 6; + wrmsrl(MSR_K8_HWCR, value); + } +#endif + + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; + 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + clear_bit(0*32+31, &c->x86_capability); + + /* On C+ stepping K8 rep microcode works well for copy/memset */ + level = cpuid_eax(1); + if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)) + set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability); + if (c->x86 == 0x10) + set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability); + + /* Enable workaround for FXSAVE leak */ + if (c->x86 >= 6) + set_bit(X86_FEATURE_FXSAVE_LEAK, &c->x86_capability); + + level = get_model_name(c); + if (!level) { + switch (c->x86) { + case 15: + /* Should distinguish Models here, but this is only + a fallback anyways. */ + strcpy(c->x86_model_id, "Hammer"); + break; + } + } + display_cacheinfo(c); + + /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ + if (c->x86_power & (1<<8)) + set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability); + + /* Multi core CPU? */ + if (c->extended_cpuid_level >= 0x80000008) + amd_detect_cmp(c); + + if (c->extended_cpuid_level >= 0x80000006 && + (cpuid_edx(0x80000006) & 0xf000)) + num_cache_leaves = 4; + else + num_cache_leaves = 3; + + if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) + set_bit(X86_FEATURE_K8, &c->x86_capability); + + /* RDTSC can be speculated around */ + clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); + + /* Family 10 doesn't support C states in MWAIT so don't use it */ + if (c->x86 == 0x10 && !force_mwait) + clear_bit(X86_FEATURE_MWAIT, &c->x86_capability); +} + +static void __cpuinit detect_ht(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + u32 eax, ebx, ecx, edx; + int index_msb, core_bits; + + cpuid(1, &eax, &ebx, &ecx, &edx); + + + if (!cpu_has(c, X86_FEATURE_HT)) + return; + if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) + goto out; + + smp_num_siblings = (ebx & 0xff0000) >> 16; + + if (smp_num_siblings == 1) { + printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); + } else if (smp_num_siblings > 1 ) { + + if (smp_num_siblings > NR_CPUS) { + printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings); + smp_num_siblings = 1; + return; + } + + index_msb = get_count_order(smp_num_siblings); + c->phys_proc_id = phys_pkg_id(index_msb); + + smp_num_siblings = smp_num_siblings / c->x86_max_cores; + + index_msb = get_count_order(smp_num_siblings) ; + + core_bits = get_count_order(c->x86_max_cores); + + c->cpu_core_id = phys_pkg_id(index_msb) & + ((1 << core_bits) - 1); + } +out: + if ((c->x86_max_cores * smp_num_siblings) > 1) { + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", c->phys_proc_id); + printk(KERN_INFO "CPU: Processor Core ID: %d\n", c->cpu_core_id); + } + +#endif +} + +/* + * find out the number of processor cores on the die + */ +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) +{ + unsigned int eax, t; + + if (c->cpuid_level < 4) + return 1; + + cpuid_count(4, 0, &eax, &t, &t, &t); + + if (eax & 0x1f) + return ((eax >> 26) + 1); + else + return 1; +} + +static void srat_detect_node(void) +{ +#ifdef CONFIG_NUMA + unsigned node; + int cpu = smp_processor_id(); + int apicid = hard_smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE) + node = first_node(node_online_map); + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} + +static void __cpuinit init_intel(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + init_intel_cacheinfo(c); + if (c->cpuid_level > 9 ) { + unsigned eax = cpuid_eax(10); + /* Check for version and the number of counters */ + if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) + set_bit(X86_FEATURE_ARCH_PERFMON, &c->x86_capability); + } + + if (cpu_has_ds) { + unsigned int l1, l2; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_bit(X86_FEATURE_BTS, c->x86_capability); + if (!(l1 & (1<<12))) + set_bit(X86_FEATURE_PEBS, c->x86_capability); + } + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + /* CPUID workaround for Intel 0F34 CPU */ + if (c->x86_vendor == X86_VENDOR_INTEL && + c->x86 == 0xF && c->x86_model == 0x3 && + c->x86_mask == 0x4) + c->x86_phys_bits = 36; + } + + if (c->x86 == 15) + c->x86_cache_alignment = c->x86_clflush_size * 2; + if ((c->x86 == 0xf && c->x86_model >= 0x03) || + (c->x86 == 0x6 && c->x86_model >= 0x0e)) + set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability); + if (c->x86 == 6) + set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability); + if (c->x86 == 15) + set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); + else + clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); + c->x86_max_cores = intel_num_cpu_cores(c); + + srat_detect_node(); +} + +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) +{ + char *v = c->x86_vendor_id; + + if (!strcmp(v, "AuthenticAMD")) + c->x86_vendor = X86_VENDOR_AMD; + else if (!strcmp(v, "GenuineIntel")) + c->x86_vendor = X86_VENDOR_INTEL; + else + c->x86_vendor = X86_VENDOR_UNKNOWN; +} + +struct cpu_model_info { + int vendor; + int family; + char *model_names[16]; +}; + +/* Do some early cpuid on the boot CPU to get some parameter that are + needed before check_bugs. Everything advanced is in identify_cpu + below. */ +void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) +{ + u32 tfms; + + c->loops_per_jiffy = loops_per_jiffy; + c->x86_cache_size = -1; + c->x86_vendor = X86_VENDOR_UNKNOWN; + c->x86_model = c->x86_mask = 0; /* So far unknown... */ + c->x86_vendor_id[0] = '\0'; /* Unset */ + c->x86_model_id[0] = '\0'; /* Unset */ + c->x86_clflush_size = 64; + c->x86_cache_alignment = c->x86_clflush_size; + c->x86_max_cores = 1; + c->extended_cpuid_level = 0; + memset(&c->x86_capability, 0, sizeof c->x86_capability); + + /* Get vendor name */ + cpuid(0x00000000, (unsigned int *)&c->cpuid_level, + (unsigned int *)&c->x86_vendor_id[0], + (unsigned int *)&c->x86_vendor_id[8], + (unsigned int *)&c->x86_vendor_id[4]); + + get_cpu_vendor(c); + + /* Initialize the standard set of capabilities */ + /* Note that the vendor-specific code below might override */ + + /* Intel-defined flags: level 0x00000001 */ + if (c->cpuid_level >= 0x00000001) { + __u32 misc; + cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4], + &c->x86_capability[0]); + c->x86 = (tfms >> 8) & 0xf; + c->x86_model = (tfms >> 4) & 0xf; + c->x86_mask = tfms & 0xf; + if (c->x86 == 0xf) + c->x86 += (tfms >> 20) & 0xff; + if (c->x86 >= 0x6) + c->x86_model += ((tfms >> 16) & 0xF) << 4; + if (c->x86_capability[0] & (1<<19)) + c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; + } else { + /* Have CPUID level 0 only - unheard of */ + c->x86 = 4; + } + +#ifdef CONFIG_SMP + c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff; +#endif +} + +/* + * This does the hard work of actually picking apart the CPU stuff... + */ +void __cpuinit identify_cpu(struct cpuinfo_x86 *c) +{ + int i; + u32 xlvl; + + early_identify_cpu(c); + + /* AMD-defined flags: level 0x80000001 */ + xlvl = cpuid_eax(0x80000000); + c->extended_cpuid_level = xlvl; + if ((xlvl & 0xffff0000) == 0x80000000) { + if (xlvl >= 0x80000001) { + c->x86_capability[1] = cpuid_edx(0x80000001); + c->x86_capability[6] = cpuid_ecx(0x80000001); + } + if (xlvl >= 0x80000004) + get_model_name(c); /* Default name */ + } + + /* Transmeta-defined flags: level 0x80860001 */ + xlvl = cpuid_eax(0x80860000); + if ((xlvl & 0xffff0000) == 0x80860000) { + /* Don't set x86_cpuid_level here for now to not confuse. */ + if (xlvl >= 0x80860001) + c->x86_capability[2] = cpuid_edx(0x80860001); + } + + init_scattered_cpuid_features(c); + + c->apicid = phys_pkg_id(0); + + /* + * Vendor-specific initialization. In this section we + * canonicalize the feature flags, meaning if there are + * features a certain CPU supports which CPUID doesn't + * tell us, CPUID claiming incorrect flags, or other bugs, + * we handle them here. + * + * At the end of this section, c->x86_capability better + * indicate the features this CPU genuinely supports! + */ + switch (c->x86_vendor) { + case X86_VENDOR_AMD: + init_amd(c); + break; + + case X86_VENDOR_INTEL: + init_intel(c); + break; + + case X86_VENDOR_UNKNOWN: + default: + display_cacheinfo(c); + break; + } + + select_idle_routine(c); + detect_ht(c); + + /* + * On SMP, boot_cpu_data holds the common feature set between + * all CPUs; so make sure that we indicate which features are + * common between the CPUs. The first time this routine gets + * executed, c == &boot_cpu_data. + */ + if (c != &boot_cpu_data) { + /* AND the already accumulated flags with these */ + for (i = 0 ; i < NCAPINTS ; i++) + boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; + } + +#ifdef CONFIG_X86_MCE + mcheck_init(c); +#endif + if (c != &boot_cpu_data) + mtrr_ap_init(); +#ifdef CONFIG_NUMA + numa_add_cpu(smp_processor_id()); +#endif +} + + +void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) +{ + if (c->x86_model_id[0]) + printk("%s", c->x86_model_id); + + if (c->x86_mask || c->cpuid_level >= 0) + printk(" stepping %02x\n", c->x86_mask); + else + printk("\n"); +} + +/* + * Get CPU information for use by the procfs. + */ + +static int show_cpuinfo(struct seq_file *m, void *v) +{ + struct cpuinfo_x86 *c = v; + + /* + * These flag bits must match the definitions in <asm/cpufeature.h>. + * NULL means this bit is undefined or reserved; either way it doesn't + * have meaning as far as Linux is concerned. Note that it's important + * to realize there is a difference between this table and CPUID -- if + * applications want to get the raw CPUID data, they should access + * /dev/cpu/<cpu_nr>/cpuid instead. + */ + static char *x86_cap_flags[] = { + /* Intel-defined */ + "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce", + "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov", + "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx", + "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe", + + /* AMD-defined */ + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, "nx", NULL, "mmxext", NULL, + NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", + "3dnowext", "3dnow", + + /* Transmeta-defined */ + "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* Other (Linux-defined) */ + "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", + NULL, NULL, NULL, NULL, + "constant_tsc", "up", NULL, "arch_perfmon", + "pebs", "bts", NULL, "sync_rdtsc", + "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* Intel-defined (#2) */ + "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", + "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* VIA/Cyrix/Centaur-defined */ + NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en", + "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* AMD-defined (#2) */ + "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", + "altmovcr8", "abm", "sse4a", + "misalignsse", "3dnowprefetch", + "osvw", "ibs", NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + + /* Auxiliary (Linux-defined) */ + "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + }; + static char *x86_power_flags[] = { + "ts", /* temperature sensor */ + "fid", /* frequency id control */ + "vid", /* voltage id control */ + "ttp", /* thermal trip */ + "tm", + "stc", + "100mhzsteps", + "hwpstate", + "", /* tsc invariant mapped to constant_tsc */ + /* nothing */ + }; + + +#ifdef CONFIG_SMP + if (!cpu_online(c-cpu_data)) + return 0; +#endif + + seq_printf(m,"processor\t: %u\n" + "vendor_id\t: %s\n" + "cpu family\t: %d\n" + "model\t\t: %d\n" + "model name\t: %s\n", + (unsigned)(c-cpu_data), + c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown", + c->x86, + (int)c->x86_model, + c->x86_model_id[0] ? c->x86_model_id : "unknown"); + + if (c->x86_mask || c->cpuid_level >= 0) + seq_printf(m, "stepping\t: %d\n", c->x86_mask); + else + seq_printf(m, "stepping\t: unknown\n"); + + if (cpu_has(c,X86_FEATURE_TSC)) { + unsigned int freq = cpufreq_quick_get((unsigned)(c-cpu_data)); + if (!freq) + freq = cpu_khz; + seq_printf(m, "cpu MHz\t\t: %u.%03u\n", + freq / 1000, (freq % 1000)); + } + + /* Cache size */ + if (c->x86_cache_size >= 0) + seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size); + +#ifdef CONFIG_SMP + if (smp_num_siblings * c->x86_max_cores > 1) { + int cpu = c - cpu_data; + seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); + seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[cpu])); + seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); + seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); + } +#endif + + seq_printf(m, + "fpu\t\t: yes\n" + "fpu_exception\t: yes\n" + "cpuid level\t: %d\n" + "wp\t\t: yes\n" + "flags\t\t:", + c->cpuid_level); + + { + int i; + for ( i = 0 ; i < 32*NCAPINTS ; i++ ) + if (cpu_has(c, i) && x86_cap_flags[i] != NULL) + seq_printf(m, " %s", x86_cap_flags[i]); + } + + seq_printf(m, "\nbogomips\t: %lu.%02lu\n", + c->loops_per_jiffy/(500000/HZ), + (c->loops_per_jiffy/(5000/HZ)) % 100); + + if (c->x86_tlbsize > 0) + seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize); + seq_printf(m, "clflush size\t: %d\n", c->x86_clflush_size); + seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment); + + seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n", + c->x86_phys_bits, c->x86_virt_bits); + + seq_printf(m, "power management:"); + { + unsigned i; + for (i = 0; i < 32; i++) + if (c->x86_power & (1 << i)) { + if (i < ARRAY_SIZE(x86_power_flags) && + x86_power_flags[i]) + seq_printf(m, "%s%s", + x86_power_flags[i][0]?" ":"", + x86_power_flags[i]); + else + seq_printf(m, " [%d]", i); + } + } + + seq_printf(m, "\n\n"); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < NR_CPUS ? cpu_data + *pos : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +struct seq_operations cpuinfo_op = { + .start =c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; diff --git a/arch/x86/kernel/sigframe_32.h b/arch/x86/kernel/sigframe_32.h new file mode 100644 index 000000000000..0b2221711dad --- /dev/null +++ b/arch/x86/kernel/sigframe_32.h @@ -0,0 +1,21 @@ +struct sigframe +{ + char __user *pretcode; + int sig; + struct sigcontext sc; + struct _fpstate fpstate; + unsigned long extramask[_NSIG_WORDS-1]; + char retcode[8]; +}; + +struct rt_sigframe +{ + char __user *pretcode; + int sig; + struct siginfo __user *pinfo; + void __user *puc; + struct siginfo info; + struct ucontext uc; + struct _fpstate fpstate; + char retcode[8]; +}; diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c new file mode 100644 index 000000000000..c03570f7fe8e --- /dev/null +++ b/arch/x86/kernel/signal_32.c @@ -0,0 +1,667 @@ +/* + * linux/arch/i386/kernel/signal.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson + * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/unistd.h> +#include <linux/stddef.h> +#include <linux/personality.h> +#include <linux/suspend.h> +#include <linux/ptrace.h> +#include <linux/elf.h> +#include <linux/binfmts.h> +#include <asm/processor.h> +#include <asm/ucontext.h> +#include <asm/uaccess.h> +#include <asm/i387.h> +#include "sigframe_32.h" + +#define DEBUG_SIG 0 + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ +asmlinkage int +sys_sigsuspend(int history0, int history1, old_sigset_t mask) +{ + mask &= _BLOCKABLE; + spin_lock_irq(¤t->sighand->siglock); + current->saved_sigmask = current->blocked; + siginitset(¤t->blocked, mask); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + current->state = TASK_INTERRUPTIBLE; + schedule(); + set_thread_flag(TIF_RESTORE_SIGMASK); + return -ERESTARTNOHAND; +} + +asmlinkage int +sys_sigaction(int sig, const struct old_sigaction __user *act, + struct old_sigaction __user *oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + + if (act) { + old_sigset_t mask; + if (!access_ok(VERIFY_READ, act, sizeof(*act)) || + __get_user(new_ka.sa.sa_handler, &act->sa_handler) || + __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + return -EFAULT; + __get_user(new_ka.sa.sa_flags, &act->sa_flags); + __get_user(mask, &act->sa_mask); + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || + __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || + __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + return -EFAULT; + __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + } + + return ret; +} + +asmlinkage int +sys_sigaltstack(unsigned long ebx) +{ + /* This is needed to make gcc realize it doesn't own the "struct pt_regs" */ + struct pt_regs *regs = (struct pt_regs *)&ebx; + const stack_t __user *uss = (const stack_t __user *)ebx; + stack_t __user *uoss = (stack_t __user *)regs->ecx; + + return do_sigaltstack(uss, uoss, regs->esp); +} + + +/* + * Do a signal return; undo the signal stack. + */ + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax) +{ + unsigned int err = 0; + + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + +#define COPY(x) err |= __get_user(regs->x, &sc->x) + +#define COPY_SEG(seg) \ + { unsigned short tmp; \ + err |= __get_user(tmp, &sc->seg); \ + regs->x##seg = tmp; } + +#define COPY_SEG_STRICT(seg) \ + { unsigned short tmp; \ + err |= __get_user(tmp, &sc->seg); \ + regs->x##seg = tmp|3; } + +#define GET_SEG(seg) \ + { unsigned short tmp; \ + err |= __get_user(tmp, &sc->seg); \ + loadsegment(seg,tmp); } + +#define FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_RF | \ + X86_EFLAGS_OF | X86_EFLAGS_DF | \ + X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \ + X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF) + + GET_SEG(gs); + COPY_SEG(fs); + COPY_SEG(es); + COPY_SEG(ds); + COPY(edi); + COPY(esi); + COPY(ebp); + COPY(esp); + COPY(ebx); + COPY(edx); + COPY(ecx); + COPY(eip); + COPY_SEG_STRICT(cs); + COPY_SEG_STRICT(ss); + + { + unsigned int tmpflags; + err |= __get_user(tmpflags, &sc->eflags); + regs->eflags = (regs->eflags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS); + regs->orig_eax = -1; /* disable syscall checks */ + } + + { + struct _fpstate __user * buf; + err |= __get_user(buf, &sc->fpstate); + if (buf) { + if (!access_ok(VERIFY_READ, buf, sizeof(*buf))) + goto badframe; + err |= restore_i387(buf); + } else { + struct task_struct *me = current; + if (used_math()) { + clear_fpu(me); + clear_used_math(); + } + } + } + + err |= __get_user(*peax, &sc->eax); + return err; + +badframe: + return 1; +} + +asmlinkage int sys_sigreturn(unsigned long __unused) +{ + struct pt_regs *regs = (struct pt_regs *) &__unused; + struct sigframe __user *frame = (struct sigframe __user *)(regs->esp - 8); + sigset_t set; + int eax; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + if (__get_user(set.sig[0], &frame->sc.oldmask) + || (_NSIG_WORDS > 1 + && __copy_from_user(&set.sig[1], &frame->extramask, + sizeof(frame->extramask)))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->sc, &eax)) + goto badframe; + return eax; + +badframe: + if (show_unhandled_signals && printk_ratelimit()) + printk("%s%s[%d] bad frame in sigreturn frame:%p eip:%lx" + " esp:%lx oeax:%lx\n", + current->pid > 1 ? KERN_INFO : KERN_EMERG, + current->comm, current->pid, frame, regs->eip, + regs->esp, regs->orig_eax); + + force_sig(SIGSEGV, current); + return 0; +} + +asmlinkage int sys_rt_sigreturn(unsigned long __unused) +{ + struct pt_regs *regs = (struct pt_regs *) &__unused; + struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->esp - 4); + sigset_t set; + int eax; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax)) + goto badframe; + + if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->esp) == -EFAULT) + goto badframe; + + return eax; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +/* + * Set up a signal frame. + */ + +static int +setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, + struct pt_regs *regs, unsigned long mask) +{ + int tmp, err = 0; + + err |= __put_user(regs->xfs, (unsigned int __user *)&sc->fs); + savesegment(gs, tmp); + err |= __put_user(tmp, (unsigned int __user *)&sc->gs); + + err |= __put_user(regs->xes, (unsigned int __user *)&sc->es); + err |= __put_user(regs->xds, (unsigned int __user *)&sc->ds); + err |= __put_user(regs->edi, &sc->edi); + err |= __put_user(regs->esi, &sc->esi); + err |= __put_user(regs->ebp, &sc->ebp); + err |= __put_user(regs->esp, &sc->esp); + err |= __put_user(regs->ebx, &sc->ebx); + err |= __put_user(regs->edx, &sc->edx); + err |= __put_user(regs->ecx, &sc->ecx); + err |= __put_user(regs->eax, &sc->eax); + err |= __put_user(current->thread.trap_no, &sc->trapno); + err |= __put_user(current->thread.error_code, &sc->err); + err |= __put_user(regs->eip, &sc->eip); + err |= __put_user(regs->xcs, (unsigned int __user *)&sc->cs); + err |= __put_user(regs->eflags, &sc->eflags); + err |= __put_user(regs->esp, &sc->esp_at_signal); + err |= __put_user(regs->xss, (unsigned int __user *)&sc->ss); + + tmp = save_i387(fpstate); + if (tmp < 0) + err = 1; + else + err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate); + + /* non-iBCS2 extensions.. */ + err |= __put_user(mask, &sc->oldmask); + err |= __put_user(current->thread.cr2, &sc->cr2); + + return err; +} + +/* + * Determine which stack to use.. + */ +static inline void __user * +get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) +{ + unsigned long esp; + + /* Default to using normal stack */ + esp = regs->esp; + + /* This is the X/Open sanctioned signal stack switching. */ + if (ka->sa.sa_flags & SA_ONSTACK) { + if (sas_ss_flags(esp) == 0) + esp = current->sas_ss_sp + current->sas_ss_size; + } + + /* This is the legacy signal stack switching. */ + else if ((regs->xss & 0xffff) != __USER_DS && + !(ka->sa.sa_flags & SA_RESTORER) && + ka->sa.sa_restorer) { + esp = (unsigned long) ka->sa.sa_restorer; + } + + esp -= frame_size; + /* Align the stack pointer according to the i386 ABI, + * i.e. so that on function entry ((sp + 4) & 15) == 0. */ + esp = ((esp + 4) & -16ul) - 4; + return (void __user *) esp; +} + +/* These symbols are defined with the addresses in the vsyscall page. + See vsyscall-sigreturn.S. */ +extern void __user __kernel_sigreturn; +extern void __user __kernel_rt_sigreturn; + +static int setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs * regs) +{ + void __user *restorer; + struct sigframe __user *frame; + int err = 0; + int usig; + + frame = get_sigframe(ka, regs, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + usig = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err = __put_user(usig, &frame->sig); + if (err) + goto give_sigsegv; + + err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]); + if (err) + goto give_sigsegv; + + if (_NSIG_WORDS > 1) { + err = __copy_to_user(&frame->extramask, &set->sig[1], + sizeof(frame->extramask)); + if (err) + goto give_sigsegv; + } + + if (current->binfmt->hasvdso) + restorer = (void *)VDSO_SYM(&__kernel_sigreturn); + else + restorer = (void *)&frame->retcode; + if (ka->sa.sa_flags & SA_RESTORER) + restorer = ka->sa.sa_restorer; + + /* Set up to return from userspace. */ + err |= __put_user(restorer, &frame->pretcode); + + /* + * This is popl %eax ; movl $,%eax ; int $0x80 + * + * WE DO NOT USE IT ANY MORE! It's only left here for historical + * reasons and because gdb uses it as a signature to notice + * signal handler stack frames. + */ + err |= __put_user(0xb858, (short __user *)(frame->retcode+0)); + err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2)); + err |= __put_user(0x80cd, (short __user *)(frame->retcode+6)); + + if (err) + goto give_sigsegv; + + /* Set up registers for signal handler */ + regs->esp = (unsigned long) frame; + regs->eip = (unsigned long) ka->sa.sa_handler; + regs->eax = (unsigned long) sig; + regs->edx = (unsigned long) 0; + regs->ecx = (unsigned long) 0; + + set_fs(USER_DS); + regs->xds = __USER_DS; + regs->xes = __USER_DS; + regs->xss = __USER_DS; + regs->xcs = __USER_CS; + + /* + * Clear TF when entering the signal handler, but + * notify any tracer that was single-stepping it. + * The tracer may want to single-step inside the + * handler too. + */ + regs->eflags &= ~TF_MASK; + if (test_thread_flag(TIF_SINGLESTEP)) + ptrace_notify(SIGTRAP); + +#if DEBUG_SIG + printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", + current->comm, current->pid, frame, regs->eip, frame->pretcode); +#endif + + return 0; + +give_sigsegv: + force_sigsegv(sig, current); + return -EFAULT; +} + +static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs * regs) +{ + void __user *restorer; + struct rt_sigframe __user *frame; + int err = 0; + int usig; + + frame = get_sigframe(ka, regs, sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + usig = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= __put_user(usig, &frame->sig); + err |= __put_user(&frame->info, &frame->pinfo); + err |= __put_user(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, info); + if (err) + goto give_sigsegv; + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->esp), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate, + regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + if (err) + goto give_sigsegv; + + /* Set up to return from userspace. */ + restorer = (void *)VDSO_SYM(&__kernel_rt_sigreturn); + if (ka->sa.sa_flags & SA_RESTORER) + restorer = ka->sa.sa_restorer; + err |= __put_user(restorer, &frame->pretcode); + + /* + * This is movl $,%eax ; int $0x80 + * + * WE DO NOT USE IT ANY MORE! It's only left here for historical + * reasons and because gdb uses it as a signature to notice + * signal handler stack frames. + */ + err |= __put_user(0xb8, (char __user *)(frame->retcode+0)); + err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1)); + err |= __put_user(0x80cd, (short __user *)(frame->retcode+5)); + + if (err) + goto give_sigsegv; + + /* Set up registers for signal handler */ + regs->esp = (unsigned long) frame; + regs->eip = (unsigned long) ka->sa.sa_handler; + regs->eax = (unsigned long) usig; + regs->edx = (unsigned long) &frame->info; + regs->ecx = (unsigned long) &frame->uc; + + set_fs(USER_DS); + regs->xds = __USER_DS; + regs->xes = __USER_DS; + regs->xss = __USER_DS; + regs->xcs = __USER_CS; + + /* + * Clear TF when entering the signal handler, but + * notify any tracer that was single-stepping it. + * The tracer may want to single-step inside the + * handler too. + */ + regs->eflags &= ~TF_MASK; + if (test_thread_flag(TIF_SINGLESTEP)) + ptrace_notify(SIGTRAP); + +#if DEBUG_SIG + printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", + current->comm, current->pid, frame, regs->eip, frame->pretcode); +#endif + + return 0; + +give_sigsegv: + force_sigsegv(sig, current); + return -EFAULT; +} + +/* + * OK, we're invoking a handler + */ + +static int +handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs * regs) +{ + int ret; + + /* Are we from a system call? */ + if (regs->orig_eax >= 0) { + /* If so, check system call restarting.. */ + switch (regs->eax) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + regs->eax = -EINTR; + break; + + case -ERESTARTSYS: + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->eax = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + regs->eax = regs->orig_eax; + regs->eip -= 2; + } + } + + /* + * If TF is set due to a debugger (PT_DTRACE), clear the TF flag so + * that register information in the sigcontext is correct. + */ + if (unlikely(regs->eflags & TF_MASK) + && likely(current->ptrace & PT_DTRACE)) { + current->ptrace &= ~PT_DTRACE; + regs->eflags &= ~TF_MASK; + } + + /* Set up the stack frame */ + if (ka->sa.sa_flags & SA_SIGINFO) + ret = setup_rt_frame(sig, ka, info, oldset, regs); + else + ret = setup_frame(sig, ka, oldset, regs); + + if (ret == 0) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + + return ret; +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + */ +static void fastcall do_signal(struct pt_regs *regs) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + sigset_t *oldset; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. vm86 regs switched out by assembly code + * before reaching here, so testing against kernel + * CS suffices. + */ + if (!user_mode(regs)) + return; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + /* Reenable any watchpoints before delivering the + * signal to user space. The processor register will + * have been cleared if the watchpoint triggered + * inside the kernel. + */ + if (unlikely(current->thread.debugreg[7])) + set_debugreg(current->thread.debugreg[7], 7); + + /* Whee! Actually deliver the signal. */ + if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { + /* a signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + } + + return; + } + + /* Did we come from a system call? */ + if (regs->orig_eax >= 0) { + /* Restart the system call - no handlers present */ + switch (regs->eax) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + regs->eax = regs->orig_eax; + regs->eip -= 2; + break; + + case -ERESTART_RESTARTBLOCK: + regs->eax = __NR_restart_syscall; + regs->eip -= 2; + break; + } + } + + /* if there's no signal to deliver, we just put the saved sigmask + * back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } +} + +/* + * notification of userspace execution resumption + * - triggered by the TIF_WORK_MASK flags + */ +__attribute__((regparm(3))) +void do_notify_resume(struct pt_regs *regs, void *_unused, + __u32 thread_info_flags) +{ + /* Pending single-step? */ + if (thread_info_flags & _TIF_SINGLESTEP) { + regs->eflags |= TF_MASK; + clear_thread_flag(TIF_SINGLESTEP); + } + + /* deal with pending signal delivery */ + if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) + do_signal(regs); + + clear_thread_flag(TIF_IRET); +} diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c new file mode 100644 index 000000000000..739175b01e06 --- /dev/null +++ b/arch/x86/kernel/signal_64.c @@ -0,0 +1,495 @@ +/* + * linux/arch/x86_64/kernel/signal.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs + * + * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson + * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes + * 2000-2002 x86-64 support by Andi Kleen + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/stddef.h> +#include <linux/personality.h> +#include <linux/compiler.h> +#include <asm/ucontext.h> +#include <asm/uaccess.h> +#include <asm/i387.h> +#include <asm/proto.h> +#include <asm/ia32_unistd.h> +#include <asm/mce.h> + +/* #define DEBUG_SIG 1 */ + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs * regs); +int ia32_setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs * regs); + +asmlinkage long +sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, + struct pt_regs *regs) +{ + return do_sigaltstack(uss, uoss, regs->rsp); +} + + +/* + * Do a signal return; undo the signal stack. + */ + +struct rt_sigframe +{ + char __user *pretcode; + struct ucontext uc; + struct siginfo info; +}; + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned long *prax) +{ + unsigned int err = 0; + + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + +#define COPY(x) err |= __get_user(regs->x, &sc->x) + + COPY(rdi); COPY(rsi); COPY(rbp); COPY(rsp); COPY(rbx); + COPY(rdx); COPY(rcx); COPY(rip); + COPY(r8); + COPY(r9); + COPY(r10); + COPY(r11); + COPY(r12); + COPY(r13); + COPY(r14); + COPY(r15); + + /* Kernel saves and restores only the CS segment register on signals, + * which is the bare minimum needed to allow mixed 32/64-bit code. + * App's signal handler can save/restore other segments if needed. */ + { + unsigned cs; + err |= __get_user(cs, &sc->cs); + regs->cs = cs | 3; /* Force into user mode */ + } + + { + unsigned int tmpflags; + err |= __get_user(tmpflags, &sc->eflags); + regs->eflags = (regs->eflags & ~0x40DD5) | (tmpflags & 0x40DD5); + regs->orig_rax = -1; /* disable syscall checks */ + } + + { + struct _fpstate __user * buf; + err |= __get_user(buf, &sc->fpstate); + + if (buf) { + if (!access_ok(VERIFY_READ, buf, sizeof(*buf))) + goto badframe; + err |= restore_i387(buf); + } else { + struct task_struct *me = current; + if (used_math()) { + clear_fpu(me); + clear_used_math(); + } + } + } + + err |= __get_user(*prax, &sc->rax); + return err; + +badframe: + return 1; +} + +asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + sigset_t set; + unsigned long eax; + + frame = (struct rt_sigframe __user *)(regs->rsp - 8); + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) { + goto badframe; + } + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) { + goto badframe; + } + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax)) + goto badframe; + +#ifdef DEBUG_SIG + printk("%d sigreturn rip:%lx rsp:%lx frame:%p rax:%lx\n",current->pid,regs->rip,regs->rsp,frame,eax); +#endif + + if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->rsp) == -EFAULT) + goto badframe; + + return eax; + +badframe: + signal_fault(regs,frame,"sigreturn"); + return 0; +} + +/* + * Set up a signal frame. + */ + +static inline int +setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask, struct task_struct *me) +{ + int err = 0; + + err |= __put_user(regs->cs, &sc->cs); + err |= __put_user(0, &sc->gs); + err |= __put_user(0, &sc->fs); + + err |= __put_user(regs->rdi, &sc->rdi); + err |= __put_user(regs->rsi, &sc->rsi); + err |= __put_user(regs->rbp, &sc->rbp); + err |= __put_user(regs->rsp, &sc->rsp); + err |= __put_user(regs->rbx, &sc->rbx); + err |= __put_user(regs->rdx, &sc->rdx); + err |= __put_user(regs->rcx, &sc->rcx); + err |= __put_user(regs->rax, &sc->rax); + err |= __put_user(regs->r8, &sc->r8); + err |= __put_user(regs->r9, &sc->r9); + err |= __put_user(regs->r10, &sc->r10); + err |= __put_user(regs->r11, &sc->r11); + err |= __put_user(regs->r12, &sc->r12); + err |= __put_user(regs->r13, &sc->r13); + err |= __put_user(regs->r14, &sc->r14); + err |= __put_user(regs->r15, &sc->r15); + err |= __put_user(me->thread.trap_no, &sc->trapno); + err |= __put_user(me->thread.error_code, &sc->err); + err |= __put_user(regs->rip, &sc->rip); + err |= __put_user(regs->eflags, &sc->eflags); + err |= __put_user(mask, &sc->oldmask); + err |= __put_user(me->thread.cr2, &sc->cr2); + + return err; +} + +/* + * Determine which stack to use.. + */ + +static void __user * +get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size) +{ + unsigned long rsp; + + /* Default to using normal stack - redzone*/ + rsp = regs->rsp - 128; + + /* This is the X/Open sanctioned signal stack switching. */ + if (ka->sa.sa_flags & SA_ONSTACK) { + if (sas_ss_flags(rsp) == 0) + rsp = current->sas_ss_sp + current->sas_ss_size; + } + + return (void __user *)round_down(rsp - size, 16); +} + +static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs * regs) +{ + struct rt_sigframe __user *frame; + struct _fpstate __user *fp = NULL; + int err = 0; + struct task_struct *me = current; + + if (used_math()) { + fp = get_stack(ka, regs, sizeof(struct _fpstate)); + frame = (void __user *)round_down( + (unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8; + + if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate))) + goto give_sigsegv; + + if (save_i387(fp) < 0) + err |= -1; + } else + frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8; + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + if (ka->sa.sa_flags & SA_SIGINFO) { + err |= copy_siginfo_to_user(&frame->info, info); + if (err) + goto give_sigsegv; + } + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->rsp), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me); + err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate); + if (sizeof(*set) == 16) { + __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]); + __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]); + } else + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + /* x86-64 should always use SA_RESTORER. */ + if (ka->sa.sa_flags & SA_RESTORER) { + err |= __put_user(ka->sa.sa_restorer, &frame->pretcode); + } else { + /* could use a vstub here */ + goto give_sigsegv; + } + + if (err) + goto give_sigsegv; + +#ifdef DEBUG_SIG + printk("%d old rip %lx old rsp %lx old rax %lx\n", current->pid,regs->rip,regs->rsp,regs->rax); +#endif + + /* Set up registers for signal handler */ + regs->rdi = sig; + /* In case the signal handler was declared without prototypes */ + regs->rax = 0; + + /* This also works for non SA_SIGINFO handlers because they expect the + next argument after the signal number on the stack. */ + regs->rsi = (unsigned long)&frame->info; + regs->rdx = (unsigned long)&frame->uc; + regs->rip = (unsigned long) ka->sa.sa_handler; + + regs->rsp = (unsigned long)frame; + + /* Set up the CS register to run signal handlers in 64-bit mode, + even if the handler happens to be interrupting 32-bit code. */ + regs->cs = __USER_CS; + + /* This, by contrast, has nothing to do with segment registers - + see include/asm-x86_64/uaccess.h for details. */ + set_fs(USER_DS); + + regs->eflags &= ~TF_MASK; + if (test_thread_flag(TIF_SINGLESTEP)) + ptrace_notify(SIGTRAP); +#ifdef DEBUG_SIG + printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%p\n", + current->comm, current->pid, frame, regs->rip, frame->pretcode); +#endif + + return 0; + +give_sigsegv: + force_sigsegv(sig, current); + return -EFAULT; +} + +/* + * OK, we're invoking a handler + */ + +static int +handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs *regs) +{ + int ret; + +#ifdef DEBUG_SIG + printk("handle_signal pid:%d sig:%lu rip:%lx rsp:%lx regs=%p\n", + current->pid, sig, + regs->rip, regs->rsp, regs); +#endif + + /* Are we from a system call? */ + if ((long)regs->orig_rax >= 0) { + /* If so, check system call restarting.. */ + switch (regs->rax) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + regs->rax = -EINTR; + break; + + case -ERESTARTSYS: + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->rax = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + regs->rax = regs->orig_rax; + regs->rip -= 2; + break; + } + } + + /* + * If TF is set due to a debugger (PT_DTRACE), clear the TF + * flag so that register information in the sigcontext is + * correct. + */ + if (unlikely(regs->eflags & TF_MASK)) { + if (likely(current->ptrace & PT_DTRACE)) { + current->ptrace &= ~PT_DTRACE; + regs->eflags &= ~TF_MASK; + } + } + +#ifdef CONFIG_IA32_EMULATION + if (test_thread_flag(TIF_IA32)) { + if (ka->sa.sa_flags & SA_SIGINFO) + ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs); + else + ret = ia32_setup_frame(sig, ka, oldset, regs); + } else +#endif + ret = setup_rt_frame(sig, ka, info, oldset, regs); + + if (ret == 0) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + + return ret; +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + */ +static void do_signal(struct pt_regs *regs) +{ + struct k_sigaction ka; + siginfo_t info; + int signr; + sigset_t *oldset; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (!user_mode(regs)) + return; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + /* Reenable any watchpoints before delivering the + * signal to user space. The processor register will + * have been cleared if the watchpoint triggered + * inside the kernel. + */ + if (current->thread.debugreg7) + set_debugreg(current->thread.debugreg7, 7); + + /* Whee! Actually deliver the signal. */ + if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { + /* a signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag */ + clear_thread_flag(TIF_RESTORE_SIGMASK); + } + return; + } + + /* Did we come from a system call? */ + if ((long)regs->orig_rax >= 0) { + /* Restart the system call - no handlers present */ + long res = regs->rax; + switch (res) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + regs->rax = regs->orig_rax; + regs->rip -= 2; + break; + case -ERESTART_RESTARTBLOCK: + regs->rax = test_thread_flag(TIF_IA32) ? + __NR_ia32_restart_syscall : + __NR_restart_syscall; + regs->rip -= 2; + break; + } + } + + /* if there's no signal to deliver, we just put the saved sigmask + back. */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } +} + +void +do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) +{ +#ifdef DEBUG_SIG + printk("do_notify_resume flags:%x rip:%lx rsp:%lx caller:%p pending:%x\n", + thread_info_flags, regs->rip, regs->rsp, __builtin_return_address(0),signal_pending(current)); +#endif + + /* Pending single-step? */ + if (thread_info_flags & _TIF_SINGLESTEP) { + regs->eflags |= TF_MASK; + clear_thread_flag(TIF_SINGLESTEP); + } + +#ifdef CONFIG_X86_MCE + /* notify userspace of pending MCEs */ + if (thread_info_flags & _TIF_MCE_NOTIFY) + mce_notify_user(); +#endif /* CONFIG_X86_MCE */ + + /* deal with pending signal delivery */ + if (thread_info_flags & (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK)) + do_signal(regs); +} + +void signal_fault(struct pt_regs *regs, void __user *frame, char *where) +{ + struct task_struct *me = current; + if (show_unhandled_signals && printk_ratelimit()) + printk("%s[%d] bad frame in %s frame:%p rip:%lx rsp:%lx orax:%lx\n", + me->comm,me->pid,where,frame,regs->rip,regs->rsp,regs->orig_rax); + + force_sig(SIGSEGV, me); +} diff --git a/arch/x86/kernel/smp_32.c b/arch/x86/kernel/smp_32.c new file mode 100644 index 000000000000..2d35d8502029 --- /dev/null +++ b/arch/x86/kernel/smp_32.c @@ -0,0 +1,707 @@ +/* + * Intel SMP support routines. + * + * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> + * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com> + * + * This code is released under the GNU General Public License version 2 or + * later. + */ + +#include <linux/init.h> + +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/kernel_stat.h> +#include <linux/mc146818rtc.h> +#include <linux/cache.h> +#include <linux/interrupt.h> +#include <linux/cpu.h> +#include <linux/module.h> + +#include <asm/mtrr.h> +#include <asm/tlbflush.h> +#include <asm/mmu_context.h> +#include <mach_apic.h> + +/* + * Some notes on x86 processor bugs affecting SMP operation: + * + * Pentium, Pentium Pro, II, III (and all CPUs) have bugs. + * The Linux implications for SMP are handled as follows: + * + * Pentium III / [Xeon] + * None of the E1AP-E3AP errata are visible to the user. + * + * E1AP. see PII A1AP + * E2AP. see PII A2AP + * E3AP. see PII A3AP + * + * Pentium II / [Xeon] + * None of the A1AP-A3AP errata are visible to the user. + * + * A1AP. see PPro 1AP + * A2AP. see PPro 2AP + * A3AP. see PPro 7AP + * + * Pentium Pro + * None of 1AP-9AP errata are visible to the normal user, + * except occasional delivery of 'spurious interrupt' as trap #15. + * This is very rare and a non-problem. + * + * 1AP. Linux maps APIC as non-cacheable + * 2AP. worked around in hardware + * 3AP. fixed in C0 and above steppings microcode update. + * Linux does not use excessive STARTUP_IPIs. + * 4AP. worked around in hardware + * 5AP. symmetric IO mode (normal Linux operation) not affected. + * 'noapic' mode has vector 0xf filled out properly. + * 6AP. 'noapic' mode might be affected - fixed in later steppings + * 7AP. We do not assume writes to the LVT deassering IRQs + * 8AP. We do not enable low power mode (deep sleep) during MP bootup + * 9AP. We do not use mixed mode + * + * Pentium + * There is a marginal case where REP MOVS on 100MHz SMP + * machines with B stepping processors can fail. XXX should provide + * an L1cache=Writethrough or L1cache=off option. + * + * B stepping CPUs may hang. There are hardware work arounds + * for this. We warn about it in case your board doesn't have the work + * arounds. Basically thats so I can tell anyone with a B stepping + * CPU and SMP problems "tough". + * + * Specific items [From Pentium Processor Specification Update] + * + * 1AP. Linux doesn't use remote read + * 2AP. Linux doesn't trust APIC errors + * 3AP. We work around this + * 4AP. Linux never generated 3 interrupts of the same priority + * to cause a lost local interrupt. + * 5AP. Remote read is never used + * 6AP. not affected - worked around in hardware + * 7AP. not affected - worked around in hardware + * 8AP. worked around in hardware - we get explicit CS errors if not + * 9AP. only 'noapic' mode affected. Might generate spurious + * interrupts, we log only the first one and count the + * rest silently. + * 10AP. not affected - worked around in hardware + * 11AP. Linux reads the APIC between writes to avoid this, as per + * the documentation. Make sure you preserve this as it affects + * the C stepping chips too. + * 12AP. not affected - worked around in hardware + * 13AP. not affected - worked around in hardware + * 14AP. we always deassert INIT during bootup + * 15AP. not affected - worked around in hardware + * 16AP. not affected - worked around in hardware + * 17AP. not affected - worked around in hardware + * 18AP. not affected - worked around in hardware + * 19AP. not affected - worked around in BIOS + * + * If this sounds worrying believe me these bugs are either ___RARE___, + * or are signal timing bugs worked around in hardware and there's + * about nothing of note with C stepping upwards. + */ + +DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0, }; + +/* + * the following functions deal with sending IPIs between CPUs. + * + * We use 'broadcast', CPU->CPU IPIs and self-IPIs too. + */ + +static inline int __prepare_ICR (unsigned int shortcut, int vector) +{ + unsigned int icr = shortcut | APIC_DEST_LOGICAL; + + switch (vector) { + default: + icr |= APIC_DM_FIXED | vector; + break; + case NMI_VECTOR: + icr |= APIC_DM_NMI; + break; + } + return icr; +} + +static inline int __prepare_ICR2 (unsigned int mask) +{ + return SET_APIC_DEST_FIELD(mask); +} + +void __send_IPI_shortcut(unsigned int shortcut, int vector) +{ + /* + * Subtle. In the case of the 'never do double writes' workaround + * we have to lock out interrupts to be safe. As we don't care + * of the value read we use an atomic rmw access to avoid costly + * cli/sti. Otherwise we use an even cheaper single atomic write + * to the APIC. + */ + unsigned int cfg; + + /* + * Wait for idle. + */ + apic_wait_icr_idle(); + + /* + * No need to touch the target chip field + */ + cfg = __prepare_ICR(shortcut, vector); + + /* + * Send the IPI. The write to APIC_ICR fires this off. + */ + apic_write_around(APIC_ICR, cfg); +} + +void fastcall send_IPI_self(int vector) +{ + __send_IPI_shortcut(APIC_DEST_SELF, vector); +} + +/* + * This is used to send an IPI with no shorthand notation (the destination is + * specified in bits 56 to 63 of the ICR). + */ +static inline void __send_IPI_dest_field(unsigned long mask, int vector) +{ + unsigned long cfg; + + /* + * Wait for idle. + */ + if (unlikely(vector == NMI_VECTOR)) + safe_apic_wait_icr_idle(); + else + apic_wait_icr_idle(); + + /* + * prepare target chip field + */ + cfg = __prepare_ICR2(mask); + apic_write_around(APIC_ICR2, cfg); + + /* + * program the ICR + */ + cfg = __prepare_ICR(0, vector); + + /* + * Send the IPI. The write to APIC_ICR fires this off. + */ + apic_write_around(APIC_ICR, cfg); +} + +/* + * This is only used on smaller machines. + */ +void send_IPI_mask_bitmask(cpumask_t cpumask, int vector) +{ + unsigned long mask = cpus_addr(cpumask)[0]; + unsigned long flags; + + local_irq_save(flags); + WARN_ON(mask & ~cpus_addr(cpu_online_map)[0]); + __send_IPI_dest_field(mask, vector); + local_irq_restore(flags); +} + +void send_IPI_mask_sequence(cpumask_t mask, int vector) +{ + unsigned long flags; + unsigned int query_cpu; + + /* + * Hack. The clustered APIC addressing mode doesn't allow us to send + * to an arbitrary mask, so I do a unicasts to each CPU instead. This + * should be modified to do 1 message per cluster ID - mbligh + */ + + local_irq_save(flags); + for (query_cpu = 0; query_cpu < NR_CPUS; ++query_cpu) { + if (cpu_isset(query_cpu, mask)) { + __send_IPI_dest_field(cpu_to_logical_apicid(query_cpu), + vector); + } + } + local_irq_restore(flags); +} + +#include <mach_ipi.h> /* must come after the send_IPI functions above for inlining */ + +/* + * Smarter SMP flushing macros. + * c/o Linus Torvalds. + * + * These mean you can really definitely utterly forget about + * writing to user space from interrupts. (Its not allowed anyway). + * + * Optimizations Manfred Spraul <manfred@colorfullife.com> + */ + +static cpumask_t flush_cpumask; +static struct mm_struct * flush_mm; +static unsigned long flush_va; +static DEFINE_SPINLOCK(tlbstate_lock); + +/* + * We cannot call mmdrop() because we are in interrupt context, + * instead update mm->cpu_vm_mask. + * + * We need to reload %cr3 since the page tables may be going + * away from under us.. + */ +void leave_mm(unsigned long cpu) +{ + if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) + BUG(); + cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask); + load_cr3(swapper_pg_dir); +} + +/* + * + * The flush IPI assumes that a thread switch happens in this order: + * [cpu0: the cpu that switches] + * 1) switch_mm() either 1a) or 1b) + * 1a) thread switch to a different mm + * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask); + * Stop ipi delivery for the old mm. This is not synchronized with + * the other cpus, but smp_invalidate_interrupt ignore flush ipis + * for the wrong mm, and in the worst case we perform a superflous + * tlb flush. + * 1a2) set cpu_tlbstate to TLBSTATE_OK + * Now the smp_invalidate_interrupt won't call leave_mm if cpu0 + * was in lazy tlb mode. + * 1a3) update cpu_tlbstate[].active_mm + * Now cpu0 accepts tlb flushes for the new mm. + * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask); + * Now the other cpus will send tlb flush ipis. + * 1a4) change cr3. + * 1b) thread switch without mm change + * cpu_tlbstate[].active_mm is correct, cpu0 already handles + * flush ipis. + * 1b1) set cpu_tlbstate to TLBSTATE_OK + * 1b2) test_and_set the cpu bit in cpu_vm_mask. + * Atomically set the bit [other cpus will start sending flush ipis], + * and test the bit. + * 1b3) if the bit was 0: leave_mm was called, flush the tlb. + * 2) switch %%esp, ie current + * + * The interrupt must handle 2 special cases: + * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm. + * - the cpu performs speculative tlb reads, i.e. even if the cpu only + * runs in kernel space, the cpu could load tlb entries for user space + * pages. + * + * The good news is that cpu_tlbstate is local to each cpu, no + * write/read ordering problems. + */ + +/* + * TLB flush IPI: + * + * 1) Flush the tlb entries if the cpu uses the mm that's being flushed. + * 2) Leave the mm if we are in the lazy tlb mode. + */ + +fastcall void smp_invalidate_interrupt(struct pt_regs *regs) +{ + unsigned long cpu; + + cpu = get_cpu(); + + if (!cpu_isset(cpu, flush_cpumask)) + goto out; + /* + * This was a BUG() but until someone can quote me the + * line from the intel manual that guarantees an IPI to + * multiple CPUs is retried _only_ on the erroring CPUs + * its staying as a return + * + * BUG(); + */ + + if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) { + if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) { + if (flush_va == TLB_FLUSH_ALL) + local_flush_tlb(); + else + __flush_tlb_one(flush_va); + } else + leave_mm(cpu); + } + ack_APIC_irq(); + smp_mb__before_clear_bit(); + cpu_clear(cpu, flush_cpumask); + smp_mb__after_clear_bit(); +out: + put_cpu_no_resched(); +} + +void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, + unsigned long va) +{ + cpumask_t cpumask = *cpumaskp; + + /* + * A couple of (to be removed) sanity checks: + * + * - current CPU must not be in mask + * - mask must exist :) + */ + BUG_ON(cpus_empty(cpumask)); + BUG_ON(cpu_isset(smp_processor_id(), cpumask)); + BUG_ON(!mm); + +#ifdef CONFIG_HOTPLUG_CPU + /* If a CPU which we ran on has gone down, OK. */ + cpus_and(cpumask, cpumask, cpu_online_map); + if (unlikely(cpus_empty(cpumask))) + return; +#endif + + /* + * i'm not happy about this global shared spinlock in the + * MM hot path, but we'll see how contended it is. + * AK: x86-64 has a faster method that could be ported. + */ + spin_lock(&tlbstate_lock); + + flush_mm = mm; + flush_va = va; + cpus_or(flush_cpumask, cpumask, flush_cpumask); + /* + * We have to send the IPI only to + * CPUs affected. + */ + send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR); + + while (!cpus_empty(flush_cpumask)) + /* nothing. lockup detection does not belong here */ + cpu_relax(); + + flush_mm = NULL; + flush_va = 0; + spin_unlock(&tlbstate_lock); +} + +void flush_tlb_current_task(void) +{ + struct mm_struct *mm = current->mm; + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + local_flush_tlb(); + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); + preempt_enable(); +} + +void flush_tlb_mm (struct mm_struct * mm) +{ + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + if (current->active_mm == mm) { + if (current->mm) + local_flush_tlb(); + else + leave_mm(smp_processor_id()); + } + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); + + preempt_enable(); +} + +void flush_tlb_page(struct vm_area_struct * vma, unsigned long va) +{ + struct mm_struct *mm = vma->vm_mm; + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + if (current->active_mm == mm) { + if(current->mm) + __flush_tlb_one(va); + else + leave_mm(smp_processor_id()); + } + + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, va); + + preempt_enable(); +} +EXPORT_SYMBOL(flush_tlb_page); + +static void do_flush_tlb_all(void* info) +{ + unsigned long cpu = smp_processor_id(); + + __flush_tlb_all(); + if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY) + leave_mm(cpu); +} + +void flush_tlb_all(void) +{ + on_each_cpu(do_flush_tlb_all, NULL, 1, 1); +} + +/* + * this function sends a 'reschedule' IPI to another CPU. + * it goes straight through and wastes no time serializing + * anything. Worst case is that we lose a reschedule ... + */ +static void native_smp_send_reschedule(int cpu) +{ + WARN_ON(cpu_is_offline(cpu)); + send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR); +} + +/* + * Structure and data for smp_call_function(). This is designed to minimise + * static memory requirements. It also looks cleaner. + */ +static DEFINE_SPINLOCK(call_lock); + +struct call_data_struct { + void (*func) (void *info); + void *info; + atomic_t started; + atomic_t finished; + int wait; +}; + +void lock_ipi_call_lock(void) +{ + spin_lock_irq(&call_lock); +} + +void unlock_ipi_call_lock(void) +{ + spin_unlock_irq(&call_lock); +} + +static struct call_data_struct *call_data; + +static void __smp_call_function(void (*func) (void *info), void *info, + int nonatomic, int wait) +{ + struct call_data_struct data; + int cpus = num_online_cpus() - 1; + + if (!cpus) + return; + + data.func = func; + data.info = info; + atomic_set(&data.started, 0); + data.wait = wait; + if (wait) + atomic_set(&data.finished, 0); + + call_data = &data; + mb(); + + /* Send a message to all other CPUs and wait for them to respond */ + send_IPI_allbutself(CALL_FUNCTION_VECTOR); + + /* Wait for response */ + while (atomic_read(&data.started) != cpus) + cpu_relax(); + + if (wait) + while (atomic_read(&data.finished) != cpus) + cpu_relax(); +} + + +/** + * smp_call_function_mask(): Run a function on a set of other CPUs. + * @mask: The set of cpus to run on. Must not include the current cpu. + * @func: The function to run. This must be fast and non-blocking. + * @info: An arbitrary pointer to pass to the function. + * @wait: If true, wait (atomically) until function has completed on other CPUs. + * + * Returns 0 on success, else a negative status code. + * + * If @wait is true, then returns once @func has returned; otherwise + * it returns just before the target cpu calls @func. + * + * You must not call this function with disabled interrupts or from a + * hardware interrupt handler or from a bottom half handler. + */ +static int +native_smp_call_function_mask(cpumask_t mask, + void (*func)(void *), void *info, + int wait) +{ + struct call_data_struct data; + cpumask_t allbutself; + int cpus; + + /* Can deadlock when called with interrupts disabled */ + WARN_ON(irqs_disabled()); + + /* Holding any lock stops cpus from going down. */ + spin_lock(&call_lock); + + allbutself = cpu_online_map; + cpu_clear(smp_processor_id(), allbutself); + + cpus_and(mask, mask, allbutself); + cpus = cpus_weight(mask); + + if (!cpus) { + spin_unlock(&call_lock); + return 0; + } + + data.func = func; + data.info = info; + atomic_set(&data.started, 0); + data.wait = wait; + if (wait) + atomic_set(&data.finished, 0); + + call_data = &data; + mb(); + + /* Send a message to other CPUs */ + if (cpus_equal(mask, allbutself)) + send_IPI_allbutself(CALL_FUNCTION_VECTOR); + else + send_IPI_mask(mask, CALL_FUNCTION_VECTOR); + + /* Wait for response */ + while (atomic_read(&data.started) != cpus) + cpu_relax(); + + if (wait) + while (atomic_read(&data.finished) != cpus) + cpu_relax(); + spin_unlock(&call_lock); + + return 0; +} + +static void stop_this_cpu (void * dummy) +{ + local_irq_disable(); + /* + * Remove this CPU: + */ + cpu_clear(smp_processor_id(), cpu_online_map); + disable_local_APIC(); + if (cpu_data[smp_processor_id()].hlt_works_ok) + for(;;) halt(); + for (;;); +} + +/* + * this function calls the 'stop' function on all other CPUs in the system. + */ + +static void native_smp_send_stop(void) +{ + /* Don't deadlock on the call lock in panic */ + int nolock = !spin_trylock(&call_lock); + unsigned long flags; + + local_irq_save(flags); + __smp_call_function(stop_this_cpu, NULL, 0, 0); + if (!nolock) + spin_unlock(&call_lock); + disable_local_APIC(); + local_irq_restore(flags); +} + +/* + * Reschedule call back. Nothing to do, + * all the work is done automatically when + * we return from the interrupt. + */ +fastcall void smp_reschedule_interrupt(struct pt_regs *regs) +{ + ack_APIC_irq(); +} + +fastcall void smp_call_function_interrupt(struct pt_regs *regs) +{ + void (*func) (void *info) = call_data->func; + void *info = call_data->info; + int wait = call_data->wait; + + ack_APIC_irq(); + /* + * Notify initiating CPU that I've grabbed the data and am + * about to execute the function + */ + mb(); + atomic_inc(&call_data->started); + /* + * At this point the info structure may be out of scope unless wait==1 + */ + irq_enter(); + (*func)(info); + irq_exit(); + + if (wait) { + mb(); + atomic_inc(&call_data->finished); + } +} + +static int convert_apicid_to_cpu(int apic_id) +{ + int i; + + for (i = 0; i < NR_CPUS; i++) { + if (x86_cpu_to_apicid[i] == apic_id) + return i; + } + return -1; +} + +int safe_smp_processor_id(void) +{ + int apicid, cpuid; + + if (!boot_cpu_has(X86_FEATURE_APIC)) + return 0; + + apicid = hard_smp_processor_id(); + if (apicid == BAD_APICID) + return 0; + + cpuid = convert_apicid_to_cpu(apicid); + + return cpuid >= 0 ? cpuid : 0; +} + +struct smp_ops smp_ops = { + .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, + .smp_prepare_cpus = native_smp_prepare_cpus, + .cpu_up = native_cpu_up, + .smp_cpus_done = native_smp_cpus_done, + + .smp_send_stop = native_smp_send_stop, + .smp_send_reschedule = native_smp_send_reschedule, + .smp_call_function_mask = native_smp_call_function_mask, +}; diff --git a/arch/x86/kernel/smp_64.c b/arch/x86/kernel/smp_64.c new file mode 100644 index 000000000000..df4a82812adb --- /dev/null +++ b/arch/x86/kernel/smp_64.c @@ -0,0 +1,523 @@ +/* + * Intel SMP support routines. + * + * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> + * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com> + * (c) 2002,2003 Andi Kleen, SuSE Labs. + * + * This code is released under the GNU General Public License version 2 or + * later. + */ + +#include <linux/init.h> + +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/smp.h> +#include <linux/kernel_stat.h> +#include <linux/mc146818rtc.h> +#include <linux/interrupt.h> + +#include <asm/mtrr.h> +#include <asm/pgalloc.h> +#include <asm/tlbflush.h> +#include <asm/mach_apic.h> +#include <asm/mmu_context.h> +#include <asm/proto.h> +#include <asm/apicdef.h> +#include <asm/idle.h> + +/* + * Smarter SMP flushing macros. + * c/o Linus Torvalds. + * + * These mean you can really definitely utterly forget about + * writing to user space from interrupts. (Its not allowed anyway). + * + * Optimizations Manfred Spraul <manfred@colorfullife.com> + * + * More scalable flush, from Andi Kleen + * + * To avoid global state use 8 different call vectors. + * Each CPU uses a specific vector to trigger flushes on other + * CPUs. Depending on the received vector the target CPUs look into + * the right per cpu variable for the flush data. + * + * With more than 8 CPUs they are hashed to the 8 available + * vectors. The limited global vector space forces us to this right now. + * In future when interrupts are split into per CPU domains this could be + * fixed, at the cost of triggering multiple IPIs in some cases. + */ + +union smp_flush_state { + struct { + cpumask_t flush_cpumask; + struct mm_struct *flush_mm; + unsigned long flush_va; +#define FLUSH_ALL -1ULL + spinlock_t tlbstate_lock; + }; + char pad[SMP_CACHE_BYTES]; +} ____cacheline_aligned; + +/* State is put into the per CPU data section, but padded + to a full cache line because other CPUs can access it and we don't + want false sharing in the per cpu data segment. */ +static DEFINE_PER_CPU(union smp_flush_state, flush_state); + +/* + * We cannot call mmdrop() because we are in interrupt context, + * instead update mm->cpu_vm_mask. + */ +static inline void leave_mm(int cpu) +{ + if (read_pda(mmu_state) == TLBSTATE_OK) + BUG(); + cpu_clear(cpu, read_pda(active_mm)->cpu_vm_mask); + load_cr3(swapper_pg_dir); +} + +/* + * + * The flush IPI assumes that a thread switch happens in this order: + * [cpu0: the cpu that switches] + * 1) switch_mm() either 1a) or 1b) + * 1a) thread switch to a different mm + * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask); + * Stop ipi delivery for the old mm. This is not synchronized with + * the other cpus, but smp_invalidate_interrupt ignore flush ipis + * for the wrong mm, and in the worst case we perform a superfluous + * tlb flush. + * 1a2) set cpu mmu_state to TLBSTATE_OK + * Now the smp_invalidate_interrupt won't call leave_mm if cpu0 + * was in lazy tlb mode. + * 1a3) update cpu active_mm + * Now cpu0 accepts tlb flushes for the new mm. + * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask); + * Now the other cpus will send tlb flush ipis. + * 1a4) change cr3. + * 1b) thread switch without mm change + * cpu active_mm is correct, cpu0 already handles + * flush ipis. + * 1b1) set cpu mmu_state to TLBSTATE_OK + * 1b2) test_and_set the cpu bit in cpu_vm_mask. + * Atomically set the bit [other cpus will start sending flush ipis], + * and test the bit. + * 1b3) if the bit was 0: leave_mm was called, flush the tlb. + * 2) switch %%esp, ie current + * + * The interrupt must handle 2 special cases: + * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm. + * - the cpu performs speculative tlb reads, i.e. even if the cpu only + * runs in kernel space, the cpu could load tlb entries for user space + * pages. + * + * The good news is that cpu mmu_state is local to each cpu, no + * write/read ordering problems. + */ + +/* + * TLB flush IPI: + * + * 1) Flush the tlb entries if the cpu uses the mm that's being flushed. + * 2) Leave the mm if we are in the lazy tlb mode. + * + * Interrupts are disabled. + */ + +asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs) +{ + int cpu; + int sender; + union smp_flush_state *f; + + cpu = smp_processor_id(); + /* + * orig_rax contains the negated interrupt vector. + * Use that to determine where the sender put the data. + */ + sender = ~regs->orig_rax - INVALIDATE_TLB_VECTOR_START; + f = &per_cpu(flush_state, sender); + + if (!cpu_isset(cpu, f->flush_cpumask)) + goto out; + /* + * This was a BUG() but until someone can quote me the + * line from the intel manual that guarantees an IPI to + * multiple CPUs is retried _only_ on the erroring CPUs + * its staying as a return + * + * BUG(); + */ + + if (f->flush_mm == read_pda(active_mm)) { + if (read_pda(mmu_state) == TLBSTATE_OK) { + if (f->flush_va == FLUSH_ALL) + local_flush_tlb(); + else + __flush_tlb_one(f->flush_va); + } else + leave_mm(cpu); + } +out: + ack_APIC_irq(); + cpu_clear(cpu, f->flush_cpumask); +} + +static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, + unsigned long va) +{ + int sender; + union smp_flush_state *f; + + /* Caller has disabled preemption */ + sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS; + f = &per_cpu(flush_state, sender); + + /* Could avoid this lock when + num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is + probably not worth checking this for a cache-hot lock. */ + spin_lock(&f->tlbstate_lock); + + f->flush_mm = mm; + f->flush_va = va; + cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask); + + /* + * We have to send the IPI only to + * CPUs affected. + */ + send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR_START + sender); + + while (!cpus_empty(f->flush_cpumask)) + cpu_relax(); + + f->flush_mm = NULL; + f->flush_va = 0; + spin_unlock(&f->tlbstate_lock); +} + +int __cpuinit init_smp_flush(void) +{ + int i; + for_each_cpu_mask(i, cpu_possible_map) { + spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock); + } + return 0; +} + +core_initcall(init_smp_flush); + +void flush_tlb_current_task(void) +{ + struct mm_struct *mm = current->mm; + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + local_flush_tlb(); + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, FLUSH_ALL); + preempt_enable(); +} +EXPORT_SYMBOL(flush_tlb_current_task); + +void flush_tlb_mm (struct mm_struct * mm) +{ + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + if (current->active_mm == mm) { + if (current->mm) + local_flush_tlb(); + else + leave_mm(smp_processor_id()); + } + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, FLUSH_ALL); + + preempt_enable(); +} +EXPORT_SYMBOL(flush_tlb_mm); + +void flush_tlb_page(struct vm_area_struct * vma, unsigned long va) +{ + struct mm_struct *mm = vma->vm_mm; + cpumask_t cpu_mask; + + preempt_disable(); + cpu_mask = mm->cpu_vm_mask; + cpu_clear(smp_processor_id(), cpu_mask); + + if (current->active_mm == mm) { + if(current->mm) + __flush_tlb_one(va); + else + leave_mm(smp_processor_id()); + } + + if (!cpus_empty(cpu_mask)) + flush_tlb_others(cpu_mask, mm, va); + + preempt_enable(); +} +EXPORT_SYMBOL(flush_tlb_page); + +static void do_flush_tlb_all(void* info) +{ + unsigned long cpu = smp_processor_id(); + + __flush_tlb_all(); + if (read_pda(mmu_state) == TLBSTATE_LAZY) + leave_mm(cpu); +} + +void flush_tlb_all(void) +{ + on_each_cpu(do_flush_tlb_all, NULL, 1, 1); +} + +/* + * this function sends a 'reschedule' IPI to another CPU. + * it goes straight through and wastes no time serializing + * anything. Worst case is that we lose a reschedule ... + */ + +void smp_send_reschedule(int cpu) +{ + send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR); +} + +/* + * Structure and data for smp_call_function(). This is designed to minimise + * static memory requirements. It also looks cleaner. + */ +static DEFINE_SPINLOCK(call_lock); + +struct call_data_struct { + void (*func) (void *info); + void *info; + atomic_t started; + atomic_t finished; + int wait; +}; + +static struct call_data_struct * call_data; + +void lock_ipi_call_lock(void) +{ + spin_lock_irq(&call_lock); +} + +void unlock_ipi_call_lock(void) +{ + spin_unlock_irq(&call_lock); +} + +/* + * this function sends a 'generic call function' IPI to one other CPU + * in the system. + * + * cpu is a standard Linux logical CPU number. + */ +static void +__smp_call_function_single(int cpu, void (*func) (void *info), void *info, + int nonatomic, int wait) +{ + struct call_data_struct data; + int cpus = 1; + + data.func = func; + data.info = info; + atomic_set(&data.started, 0); + data.wait = wait; + if (wait) + atomic_set(&data.finished, 0); + + call_data = &data; + wmb(); + /* Send a message to all other CPUs and wait for them to respond */ + send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR); + + /* Wait for response */ + while (atomic_read(&data.started) != cpus) + cpu_relax(); + + if (!wait) + return; + + while (atomic_read(&data.finished) != cpus) + cpu_relax(); +} + +/* + * smp_call_function_single - Run a function on a specific CPU + * @func: The function to run. This must be fast and non-blocking. + * @info: An arbitrary pointer to pass to the function. + * @nonatomic: Currently unused. + * @wait: If true, wait until function has completed on other CPUs. + * + * Retrurns 0 on success, else a negative status code. + * + * Does not return until the remote CPU is nearly ready to execute <func> + * or is or has executed. + */ + +int smp_call_function_single (int cpu, void (*func) (void *info), void *info, + int nonatomic, int wait) +{ + /* prevent preemption and reschedule on another processor */ + int me = get_cpu(); + + /* Can deadlock when called with interrupts disabled */ + WARN_ON(irqs_disabled()); + + if (cpu == me) { + local_irq_disable(); + func(info); + local_irq_enable(); + put_cpu(); + return 0; + } + + spin_lock(&call_lock); + __smp_call_function_single(cpu, func, info, nonatomic, wait); + spin_unlock(&call_lock); + put_cpu(); + return 0; +} +EXPORT_SYMBOL(smp_call_function_single); + +/* + * this function sends a 'generic call function' IPI to all other CPUs + * in the system. + */ +static void __smp_call_function (void (*func) (void *info), void *info, + int nonatomic, int wait) +{ + struct call_data_struct data; + int cpus = num_online_cpus()-1; + + if (!cpus) + return; + + data.func = func; + data.info = info; + atomic_set(&data.started, 0); + data.wait = wait; + if (wait) + atomic_set(&data.finished, 0); + + call_data = &data; + wmb(); + /* Send a message to all other CPUs and wait for them to respond */ + send_IPI_allbutself(CALL_FUNCTION_VECTOR); + + /* Wait for response */ + while (atomic_read(&data.started) != cpus) + cpu_relax(); + + if (!wait) + return; + + while (atomic_read(&data.finished) != cpus) + cpu_relax(); +} + +/* + * smp_call_function - run a function on all other CPUs. + * @func: The function to run. This must be fast and non-blocking. + * @info: An arbitrary pointer to pass to the function. + * @nonatomic: currently unused. + * @wait: If true, wait (atomically) until function has completed on other + * CPUs. + * + * Returns 0 on success, else a negative status code. Does not return until + * remote CPUs are nearly ready to execute func or are or have executed. + * + * You must not call this function with disabled interrupts or from a + * hardware interrupt handler or from a bottom half handler. + * Actually there are a few legal cases, like panic. + */ +int smp_call_function (void (*func) (void *info), void *info, int nonatomic, + int wait) +{ + spin_lock(&call_lock); + __smp_call_function(func,info,nonatomic,wait); + spin_unlock(&call_lock); + return 0; +} +EXPORT_SYMBOL(smp_call_function); + +static void stop_this_cpu(void *dummy) +{ + local_irq_disable(); + /* + * Remove this CPU: + */ + cpu_clear(smp_processor_id(), cpu_online_map); + disable_local_APIC(); + for (;;) + halt(); +} + +void smp_send_stop(void) +{ + int nolock; + unsigned long flags; + + if (reboot_force) + return; + + /* Don't deadlock on the call lock in panic */ + nolock = !spin_trylock(&call_lock); + local_irq_save(flags); + __smp_call_function(stop_this_cpu, NULL, 0, 0); + if (!nolock) + spin_unlock(&call_lock); + disable_local_APIC(); + local_irq_restore(flags); +} + +/* + * Reschedule call back. Nothing to do, + * all the work is done automatically when + * we return from the interrupt. + */ +asmlinkage void smp_reschedule_interrupt(void) +{ + ack_APIC_irq(); +} + +asmlinkage void smp_call_function_interrupt(void) +{ + void (*func) (void *info) = call_data->func; + void *info = call_data->info; + int wait = call_data->wait; + + ack_APIC_irq(); + /* + * Notify initiating CPU that I've grabbed the data and am + * about to execute the function + */ + mb(); + atomic_inc(&call_data->started); + /* + * At this point the info structure may be out of scope unless wait==1 + */ + exit_idle(); + irq_enter(); + (*func)(info); + irq_exit(); + if (wait) { + mb(); + atomic_inc(&call_data->finished); + } +} + diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot_32.c new file mode 100644 index 000000000000..e4f61d1c6248 --- /dev/null +++ b/arch/x86/kernel/smpboot_32.c @@ -0,0 +1,1322 @@ +/* + * x86 SMP booting functions + * + * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> + * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> + * + * Much of the core SMP work is based on previous work by Thomas Radke, to + * whom a great many thanks are extended. + * + * Thanks to Intel for making available several different Pentium, + * Pentium Pro and Pentium-II/Xeon MP machines. + * Original development of Linux SMP code supported by Caldera. + * + * This code is released under the GNU General Public License version 2 or + * later. + * + * Fixes + * Felix Koop : NR_CPUS used properly + * Jose Renau : Handle single CPU case. + * Alan Cox : By repeated request 8) - Total BogoMIPS report. + * Greg Wright : Fix for kernel stacks panic. + * Erich Boleyn : MP v1.4 and additional changes. + * Matthias Sattler : Changes for 2.1 kernel map. + * Michel Lespinasse : Changes for 2.1 kernel map. + * Michael Chastain : Change trampoline.S to gnu as. + * Alan Cox : Dumb bug: 'B' step PPro's are fine + * Ingo Molnar : Added APIC timers, based on code + * from Jose Renau + * Ingo Molnar : various cleanups and rewrites + * Tigran Aivazian : fixed "0.00 in /proc/uptime on SMP" bug. + * Maciej W. Rozycki : Bits for genuine 82489DX APICs + * Martin J. Bligh : Added support for multi-quad systems + * Dave Jones : Report invalid combinations of Athlon CPUs. +* Rusty Russell : Hacked into shape for new "hotplug" boot process. */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> + +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/kernel_stat.h> +#include <linux/bootmem.h> +#include <linux/notifier.h> +#include <linux/cpu.h> +#include <linux/percpu.h> +#include <linux/nmi.h> + +#include <linux/delay.h> +#include <linux/mc146818rtc.h> +#include <asm/tlbflush.h> +#include <asm/desc.h> +#include <asm/arch_hooks.h> +#include <asm/nmi.h> + +#include <mach_apic.h> +#include <mach_wakecpu.h> +#include <smpboot_hooks.h> +#include <asm/vmi.h> +#include <asm/mtrr.h> + +/* Set if we find a B stepping CPU */ +static int __devinitdata smp_b_stepping; + +/* Number of siblings per CPU package */ +int smp_num_siblings = 1; +EXPORT_SYMBOL(smp_num_siblings); + +/* Last level cache ID of each logical CPU */ +int cpu_llc_id[NR_CPUS] __cpuinitdata = {[0 ... NR_CPUS-1] = BAD_APICID}; + +/* representing HT siblings of each logical CPU */ +cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(cpu_sibling_map); + +/* representing HT and core siblings of each logical CPU */ +cpumask_t cpu_core_map[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(cpu_core_map); + +/* bitmap of online cpus */ +cpumask_t cpu_online_map __read_mostly; +EXPORT_SYMBOL(cpu_online_map); + +cpumask_t cpu_callin_map; +cpumask_t cpu_callout_map; +EXPORT_SYMBOL(cpu_callout_map); +cpumask_t cpu_possible_map; +EXPORT_SYMBOL(cpu_possible_map); +static cpumask_t smp_commenced_mask; + +/* Per CPU bogomips and other parameters */ +struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_data); + +u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly = + { [0 ... NR_CPUS-1] = 0xff }; +EXPORT_SYMBOL(x86_cpu_to_apicid); + +u8 apicid_2_node[MAX_APICID]; + +/* + * Trampoline 80x86 program as an array. + */ + +extern unsigned char trampoline_data []; +extern unsigned char trampoline_end []; +static unsigned char *trampoline_base; +static int trampoline_exec; + +static void map_cpu_to_logical_apicid(void); + +/* State of each CPU. */ +DEFINE_PER_CPU(int, cpu_state) = { 0 }; + +/* + * Currently trivial. Write the real->protected mode + * bootstrap into the page concerned. The caller + * has made sure it's suitably aligned. + */ + +static unsigned long __devinit setup_trampoline(void) +{ + memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data); + return virt_to_phys(trampoline_base); +} + +/* + * We are called very early to get the low memory for the + * SMP bootup trampoline page. + */ +void __init smp_alloc_memory(void) +{ + trampoline_base = (void *) alloc_bootmem_low_pages(PAGE_SIZE); + /* + * Has to be in very low memory so we can execute + * real-mode AP code. + */ + if (__pa(trampoline_base) >= 0x9F000) + BUG(); + /* + * Make the SMP trampoline executable: + */ + trampoline_exec = set_kernel_exec((unsigned long)trampoline_base, 1); +} + +/* + * The bootstrap kernel entry code has set these up. Save them for + * a given CPU + */ + +void __cpuinit smp_store_cpu_info(int id) +{ + struct cpuinfo_x86 *c = cpu_data + id; + + *c = boot_cpu_data; + if (id!=0) + identify_secondary_cpu(c); + /* + * Mask B, Pentium, but not Pentium MMX + */ + if (c->x86_vendor == X86_VENDOR_INTEL && + c->x86 == 5 && + c->x86_mask >= 1 && c->x86_mask <= 4 && + c->x86_model <= 3) + /* + * Remember we have B step Pentia with bugs + */ + smp_b_stepping = 1; + + /* + * Certain Athlons might work (for various values of 'work') in SMP + * but they are not certified as MP capable. + */ + if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) { + + if (num_possible_cpus() == 1) + goto valid_k7; + + /* Athlon 660/661 is valid. */ + if ((c->x86_model==6) && ((c->x86_mask==0) || (c->x86_mask==1))) + goto valid_k7; + + /* Duron 670 is valid */ + if ((c->x86_model==7) && (c->x86_mask==0)) + goto valid_k7; + + /* + * Athlon 662, Duron 671, and Athlon >model 7 have capability bit. + * It's worth noting that the A5 stepping (662) of some Athlon XP's + * have the MP bit set. + * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for more. + */ + if (((c->x86_model==6) && (c->x86_mask>=2)) || + ((c->x86_model==7) && (c->x86_mask>=1)) || + (c->x86_model> 7)) + if (cpu_has_mp) + goto valid_k7; + + /* If we get here, it's not a certified SMP capable AMD system. */ + add_taint(TAINT_UNSAFE_SMP); + } + +valid_k7: + ; +} + +extern void calibrate_delay(void); + +static atomic_t init_deasserted; + +static void __cpuinit smp_callin(void) +{ + int cpuid, phys_id; + unsigned long timeout; + + /* + * If waken up by an INIT in an 82489DX configuration + * we may get here before an INIT-deassert IPI reaches + * our local APIC. We have to wait for the IPI or we'll + * lock up on an APIC access. + */ + wait_for_init_deassert(&init_deasserted); + + /* + * (This works even if the APIC is not enabled.) + */ + phys_id = GET_APIC_ID(apic_read(APIC_ID)); + cpuid = smp_processor_id(); + if (cpu_isset(cpuid, cpu_callin_map)) { + printk("huh, phys CPU#%d, CPU#%d already present??\n", + phys_id, cpuid); + BUG(); + } + Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id); + + /* + * STARTUP IPIs are fragile beasts as they might sometimes + * trigger some glue motherboard logic. Complete APIC bus + * silence for 1 second, this overestimates the time the + * boot CPU is spending to send the up to 2 STARTUP IPIs + * by a factor of two. This should be enough. + */ + + /* + * Waiting 2s total for startup (udelay is not yet working) + */ + timeout = jiffies + 2*HZ; + while (time_before(jiffies, timeout)) { + /* + * Has the boot CPU finished it's STARTUP sequence? + */ + if (cpu_isset(cpuid, cpu_callout_map)) + break; + rep_nop(); + } + + if (!time_before(jiffies, timeout)) { + printk("BUG: CPU%d started up but did not get a callout!\n", + cpuid); + BUG(); + } + + /* + * the boot CPU has finished the init stage and is spinning + * on callin_map until we finish. We are free to set up this + * CPU, first the APIC. (this is probably redundant on most + * boards) + */ + + Dprintk("CALLIN, before setup_local_APIC().\n"); + smp_callin_clear_local_apic(); + setup_local_APIC(); + map_cpu_to_logical_apicid(); + + /* + * Get our bogomips. + */ + calibrate_delay(); + Dprintk("Stack at about %p\n",&cpuid); + + /* + * Save our processor parameters + */ + smp_store_cpu_info(cpuid); + + /* + * Allow the master to continue. + */ + cpu_set(cpuid, cpu_callin_map); +} + +static int cpucount; + +/* maps the cpu to the sched domain representing multi-core */ +cpumask_t cpu_coregroup_map(int cpu) +{ + struct cpuinfo_x86 *c = cpu_data + cpu; + /* + * For perf, we return last level cache shared map. + * And for power savings, we return cpu_core_map + */ + if (sched_mc_power_savings || sched_smt_power_savings) + return cpu_core_map[cpu]; + else + return c->llc_shared_map; +} + +/* representing cpus for which sibling maps can be computed */ +static cpumask_t cpu_sibling_setup_map; + +void __cpuinit set_cpu_sibling_map(int cpu) +{ + int i; + struct cpuinfo_x86 *c = cpu_data; + + cpu_set(cpu, cpu_sibling_setup_map); + + if (smp_num_siblings > 1) { + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (c[cpu].phys_proc_id == c[i].phys_proc_id && + c[cpu].cpu_core_id == c[i].cpu_core_id) { + cpu_set(i, cpu_sibling_map[cpu]); + cpu_set(cpu, cpu_sibling_map[i]); + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); + } + } + } else { + cpu_set(cpu, cpu_sibling_map[cpu]); + } + + cpu_set(cpu, c[cpu].llc_shared_map); + + if (current_cpu_data.x86_max_cores == 1) { + cpu_core_map[cpu] = cpu_sibling_map[cpu]; + c[cpu].booted_cores = 1; + return; + } + + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (cpu_llc_id[cpu] != BAD_APICID && + cpu_llc_id[cpu] == cpu_llc_id[i]) { + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); + } + if (c[cpu].phys_proc_id == c[i].phys_proc_id) { + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); + /* + * Does this new cpu bringup a new core? + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) { + /* + * for each core in package, increment + * the booted_cores for this new cpu + */ + if (first_cpu(cpu_sibling_map[i]) == i) + c[cpu].booted_cores++; + /* + * increment the core count for all + * the other cpus in this package + */ + if (i != cpu) + c[i].booted_cores++; + } else if (i != cpu && !c[cpu].booted_cores) + c[cpu].booted_cores = c[i].booted_cores; + } + } +} + +/* + * Activate a secondary processor. + */ +static void __cpuinit start_secondary(void *unused) +{ + /* + * Don't put *anything* before cpu_init(), SMP booting is too + * fragile that we want to limit the things done here to the + * most necessary things. + */ +#ifdef CONFIG_VMI + vmi_bringup(); +#endif + cpu_init(); + preempt_disable(); + smp_callin(); + while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) + rep_nop(); + /* + * Check TSC synchronization with the BP: + */ + check_tsc_sync_target(); + + setup_secondary_clock(); + if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); + enable_NMI_through_LVT0(NULL); + enable_8259A_irq(0); + } + /* + * low-memory mappings have been cleared, flush them from + * the local TLBs too. + */ + local_flush_tlb(); + + /* This must be done before setting cpu_online_map */ + set_cpu_sibling_map(raw_smp_processor_id()); + wmb(); + + /* + * We need to hold call_lock, so there is no inconsistency + * between the time smp_call_function() determines number of + * IPI receipients, and the time when the determination is made + * for which cpus receive the IPI. Holding this + * lock helps us to not include this cpu in a currently in progress + * smp_call_function(). + */ + lock_ipi_call_lock(); + cpu_set(smp_processor_id(), cpu_online_map); + unlock_ipi_call_lock(); + per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; + + /* We can take interrupts now: we're officially "up". */ + local_irq_enable(); + + wmb(); + cpu_idle(); +} + +/* + * Everything has been set up for the secondary + * CPUs - they just need to reload everything + * from the task structure + * This function must not return. + */ +void __devinit initialize_secondary(void) +{ + /* + * We don't actually need to load the full TSS, + * basically just the stack pointer and the eip. + */ + + asm volatile( + "movl %0,%%esp\n\t" + "jmp *%1" + : + :"m" (current->thread.esp),"m" (current->thread.eip)); +} + +/* Static state in head.S used to set up a CPU */ +extern struct { + void * esp; + unsigned short ss; +} stack_start; + +#ifdef CONFIG_NUMA + +/* which logical CPUs are on which nodes */ +cpumask_t node_2_cpu_mask[MAX_NUMNODES] __read_mostly = + { [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE }; +EXPORT_SYMBOL(node_2_cpu_mask); +/* which node each logical CPU is on */ +int cpu_2_node[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 }; +EXPORT_SYMBOL(cpu_2_node); + +/* set up a mapping between cpu and node. */ +static inline void map_cpu_to_node(int cpu, int node) +{ + printk("Mapping cpu %d to node %d\n", cpu, node); + cpu_set(cpu, node_2_cpu_mask[node]); + cpu_2_node[cpu] = node; +} + +/* undo a mapping between cpu and node. */ +static inline void unmap_cpu_to_node(int cpu) +{ + int node; + + printk("Unmapping cpu %d from all nodes\n", cpu); + for (node = 0; node < MAX_NUMNODES; node ++) + cpu_clear(cpu, node_2_cpu_mask[node]); + cpu_2_node[cpu] = 0; +} +#else /* !CONFIG_NUMA */ + +#define map_cpu_to_node(cpu, node) ({}) +#define unmap_cpu_to_node(cpu) ({}) + +#endif /* CONFIG_NUMA */ + +u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; + +static void map_cpu_to_logical_apicid(void) +{ + int cpu = smp_processor_id(); + int apicid = logical_smp_processor_id(); + int node = apicid_to_node(apicid); + + if (!node_online(node)) + node = first_online_node; + + cpu_2_logical_apicid[cpu] = apicid; + map_cpu_to_node(cpu, node); +} + +static void unmap_cpu_to_logical_apicid(int cpu) +{ + cpu_2_logical_apicid[cpu] = BAD_APICID; + unmap_cpu_to_node(cpu); +} + +static inline void __inquire_remote_apic(int apicid) +{ + int i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 }; + char *names[] = { "ID", "VERSION", "SPIV" }; + int timeout; + unsigned long status; + + printk("Inquiring remote APIC #%d...\n", apicid); + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + printk("... APIC #%d %s: ", apicid, names[i]); + + /* + * Wait for idle. + */ + status = safe_apic_wait_icr_idle(); + if (status) + printk("a previous APIC delivery may have failed\n"); + + apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); + apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]); + + timeout = 0; + do { + udelay(100); + status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK; + } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000); + + switch (status) { + case APIC_ICR_RR_VALID: + status = apic_read(APIC_RRR); + printk("%lx\n", status); + break; + default: + printk("failed\n"); + } + } +} + +#ifdef WAKE_SECONDARY_VIA_NMI +/* + * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal + * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this + * won't ... remember to clear down the APIC, etc later. + */ +static int __devinit +wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) +{ + unsigned long send_status, accept_status = 0; + int maxlvt; + + /* Target chip */ + apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid)); + + /* Boot on the stack */ + /* Kick the second */ + apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL); + + Dprintk("Waiting for send to finish...\n"); + send_status = safe_apic_wait_icr_idle(); + + /* + * Give the other CPU some time to accept the IPI. + */ + udelay(200); + /* + * Due to the Pentium erratum 3AP. + */ + maxlvt = lapic_get_maxlvt(); + if (maxlvt > 3) { + apic_read_around(APIC_SPIV); + apic_write(APIC_ESR, 0); + } + accept_status = (apic_read(APIC_ESR) & 0xEF); + Dprintk("NMI sent.\n"); + + if (send_status) + printk("APIC never delivered???\n"); + if (accept_status) + printk("APIC delivery error (%lx).\n", accept_status); + + return (send_status | accept_status); +} +#endif /* WAKE_SECONDARY_VIA_NMI */ + +#ifdef WAKE_SECONDARY_VIA_INIT +static int __devinit +wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) +{ + unsigned long send_status, accept_status = 0; + int maxlvt, num_starts, j; + + /* + * Be paranoid about clearing APIC errors. + */ + if (APIC_INTEGRATED(apic_version[phys_apicid])) { + apic_read_around(APIC_SPIV); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + } + + Dprintk("Asserting INIT.\n"); + + /* + * Turn INIT on target chip + */ + apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); + + /* + * Send IPI + */ + apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT + | APIC_DM_INIT); + + Dprintk("Waiting for send to finish...\n"); + send_status = safe_apic_wait_icr_idle(); + + mdelay(10); + + Dprintk("Deasserting INIT.\n"); + + /* Target chip */ + apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); + + /* Send IPI */ + apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); + + Dprintk("Waiting for send to finish...\n"); + send_status = safe_apic_wait_icr_idle(); + + atomic_set(&init_deasserted, 1); + + /* + * Should we send STARTUP IPIs ? + * + * Determine this based on the APIC version. + * If we don't have an integrated APIC, don't send the STARTUP IPIs. + */ + if (APIC_INTEGRATED(apic_version[phys_apicid])) + num_starts = 2; + else + num_starts = 0; + + /* + * Paravirt / VMI wants a startup IPI hook here to set up the + * target processor state. + */ + startup_ipi_hook(phys_apicid, (unsigned long) start_secondary, + (unsigned long) stack_start.esp); + + /* + * Run STARTUP IPI loop. + */ + Dprintk("#startup loops: %d.\n", num_starts); + + maxlvt = lapic_get_maxlvt(); + + for (j = 1; j <= num_starts; j++) { + Dprintk("Sending STARTUP #%d.\n",j); + apic_read_around(APIC_SPIV); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + Dprintk("After apic_write.\n"); + + /* + * STARTUP IPI + */ + + /* Target chip */ + apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); + + /* Boot on the stack */ + /* Kick the second */ + apic_write_around(APIC_ICR, APIC_DM_STARTUP + | (start_eip >> 12)); + + /* + * Give the other CPU some time to accept the IPI. + */ + udelay(300); + + Dprintk("Startup point 1.\n"); + + Dprintk("Waiting for send to finish...\n"); + send_status = safe_apic_wait_icr_idle(); + + /* + * Give the other CPU some time to accept the IPI. + */ + udelay(200); + /* + * Due to the Pentium erratum 3AP. + */ + if (maxlvt > 3) { + apic_read_around(APIC_SPIV); + apic_write(APIC_ESR, 0); + } + accept_status = (apic_read(APIC_ESR) & 0xEF); + if (send_status || accept_status) + break; + } + Dprintk("After Startup.\n"); + + if (send_status) + printk("APIC never delivered???\n"); + if (accept_status) + printk("APIC delivery error (%lx).\n", accept_status); + + return (send_status | accept_status); +} +#endif /* WAKE_SECONDARY_VIA_INIT */ + +extern cpumask_t cpu_initialized; +static inline int alloc_cpu_id(void) +{ + cpumask_t tmp_map; + int cpu; + cpus_complement(tmp_map, cpu_present_map); + cpu = first_cpu(tmp_map); + if (cpu >= NR_CPUS) + return -ENODEV; + return cpu; +} + +#ifdef CONFIG_HOTPLUG_CPU +static struct task_struct * __devinitdata cpu_idle_tasks[NR_CPUS]; +static inline struct task_struct * alloc_idle_task(int cpu) +{ + struct task_struct *idle; + + if ((idle = cpu_idle_tasks[cpu]) != NULL) { + /* initialize thread_struct. we really want to avoid destroy + * idle tread + */ + idle->thread.esp = (unsigned long)task_pt_regs(idle); + init_idle(idle, cpu); + return idle; + } + idle = fork_idle(cpu); + + if (!IS_ERR(idle)) + cpu_idle_tasks[cpu] = idle; + return idle; +} +#else +#define alloc_idle_task(cpu) fork_idle(cpu) +#endif + +static int __cpuinit do_boot_cpu(int apicid, int cpu) +/* + * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad + * (ie clustered apic addressing mode), this is a LOGICAL apic ID. + * Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu. + */ +{ + struct task_struct *idle; + unsigned long boot_error; + int timeout; + unsigned long start_eip; + unsigned short nmi_high = 0, nmi_low = 0; + + /* + * Save current MTRR state in case it was changed since early boot + * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync: + */ + mtrr_save_state(); + + /* + * We can't use kernel_thread since we must avoid to + * reschedule the child. + */ + idle = alloc_idle_task(cpu); + if (IS_ERR(idle)) + panic("failed fork for CPU %d", cpu); + + init_gdt(cpu); + per_cpu(current_task, cpu) = idle; + early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); + + idle->thread.eip = (unsigned long) start_secondary; + /* start_eip had better be page-aligned! */ + start_eip = setup_trampoline(); + + ++cpucount; + alternatives_smp_switch(1); + + /* So we see what's up */ + printk("Booting processor %d/%d eip %lx\n", cpu, apicid, start_eip); + /* Stack for startup_32 can be just as for start_secondary onwards */ + stack_start.esp = (void *) idle->thread.esp; + + irq_ctx_init(cpu); + + x86_cpu_to_apicid[cpu] = apicid; + /* + * This grunge runs the startup process for + * the targeted processor. + */ + + atomic_set(&init_deasserted, 0); + + Dprintk("Setting warm reset code and vector.\n"); + + store_NMI_vector(&nmi_high, &nmi_low); + + smpboot_setup_warm_reset_vector(start_eip); + + /* + * Starting actual IPI sequence... + */ + boot_error = wakeup_secondary_cpu(apicid, start_eip); + + if (!boot_error) { + /* + * allow APs to start initializing. + */ + Dprintk("Before Callout %d.\n", cpu); + cpu_set(cpu, cpu_callout_map); + Dprintk("After Callout %d.\n", cpu); + + /* + * Wait 5s total for a response + */ + for (timeout = 0; timeout < 50000; timeout++) { + if (cpu_isset(cpu, cpu_callin_map)) + break; /* It has booted */ + udelay(100); + } + + if (cpu_isset(cpu, cpu_callin_map)) { + /* number CPUs logically, starting from 1 (BSP is 0) */ + Dprintk("OK.\n"); + printk("CPU%d: ", cpu); + print_cpu_info(&cpu_data[cpu]); + Dprintk("CPU has booted.\n"); + } else { + boot_error= 1; + if (*((volatile unsigned char *)trampoline_base) + == 0xA5) + /* trampoline started but...? */ + printk("Stuck ??\n"); + else + /* trampoline code not run */ + printk("Not responding.\n"); + inquire_remote_apic(apicid); + } + } + + if (boot_error) { + /* Try to put things back the way they were before ... */ + unmap_cpu_to_logical_apicid(cpu); + cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */ + cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */ + cpucount--; + } else { + x86_cpu_to_apicid[cpu] = apicid; + cpu_set(cpu, cpu_present_map); + } + + /* mark "stuck" area as not stuck */ + *((volatile unsigned long *)trampoline_base) = 0; + + return boot_error; +} + +#ifdef CONFIG_HOTPLUG_CPU +void cpu_exit_clear(void) +{ + int cpu = raw_smp_processor_id(); + + idle_task_exit(); + + cpucount --; + cpu_uninit(); + irq_ctx_exit(cpu); + + cpu_clear(cpu, cpu_callout_map); + cpu_clear(cpu, cpu_callin_map); + + cpu_clear(cpu, smp_commenced_mask); + unmap_cpu_to_logical_apicid(cpu); +} + +struct warm_boot_cpu_info { + struct completion *complete; + struct work_struct task; + int apicid; + int cpu; +}; + +static void __cpuinit do_warm_boot_cpu(struct work_struct *work) +{ + struct warm_boot_cpu_info *info = + container_of(work, struct warm_boot_cpu_info, task); + do_boot_cpu(info->apicid, info->cpu); + complete(info->complete); +} + +static int __cpuinit __smp_prepare_cpu(int cpu) +{ + DECLARE_COMPLETION_ONSTACK(done); + struct warm_boot_cpu_info info; + int apicid, ret; + + apicid = x86_cpu_to_apicid[cpu]; + if (apicid == BAD_APICID) { + ret = -ENODEV; + goto exit; + } + + info.complete = &done; + info.apicid = apicid; + info.cpu = cpu; + INIT_WORK(&info.task, do_warm_boot_cpu); + + /* init low mem mapping */ + clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, + min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS)); + flush_tlb_all(); + schedule_work(&info.task); + wait_for_completion(&done); + + zap_low_mappings(); + ret = 0; +exit: + return ret; +} +#endif + +/* + * Cycle through the processors sending APIC IPIs to boot each. + */ + +static int boot_cpu_logical_apicid; +/* Where the IO area was mapped on multiquad, always 0 otherwise */ +void *xquad_portio; +#ifdef CONFIG_X86_NUMAQ +EXPORT_SYMBOL(xquad_portio); +#endif + +static void __init smp_boot_cpus(unsigned int max_cpus) +{ + int apicid, cpu, bit, kicked; + unsigned long bogosum = 0; + + /* + * Setup boot CPU information + */ + smp_store_cpu_info(0); /* Final full version of the data */ + printk("CPU%d: ", 0); + print_cpu_info(&cpu_data[0]); + + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); + boot_cpu_logical_apicid = logical_smp_processor_id(); + x86_cpu_to_apicid[0] = boot_cpu_physical_apicid; + + current_thread_info()->cpu = 0; + + set_cpu_sibling_map(0); + + /* + * If we couldn't find an SMP configuration at boot time, + * get out of here now! + */ + if (!smp_found_config && !acpi_lapic) { + printk(KERN_NOTICE "SMP motherboard not detected.\n"); + smpboot_clear_io_apic_irqs(); + phys_cpu_present_map = physid_mask_of_physid(0); + if (APIC_init_uniprocessor()) + printk(KERN_NOTICE "Local APIC not detected." + " Using dummy APIC emulation.\n"); + map_cpu_to_logical_apicid(); + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); + return; + } + + /* + * Should not be necessary because the MP table should list the boot + * CPU too, but we do it for the sake of robustness anyway. + * Makes no sense to do this check in clustered apic mode, so skip it + */ + if (!check_phys_apicid_present(boot_cpu_physical_apicid)) { + printk("weird, boot CPU (#%d) not listed by the BIOS.\n", + boot_cpu_physical_apicid); + physid_set(hard_smp_processor_id(), phys_cpu_present_map); + } + + /* + * If we couldn't find a local APIC, then get out of here now! + */ + if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) { + printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); + printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n"); + smpboot_clear_io_apic_irqs(); + phys_cpu_present_map = physid_mask_of_physid(0); + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); + return; + } + + verify_local_APIC(); + + /* + * If SMP should be disabled, then really disable it! + */ + if (!max_cpus) { + smp_found_config = 0; + printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n"); + smpboot_clear_io_apic_irqs(); + phys_cpu_present_map = physid_mask_of_physid(0); + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); + return; + } + + connect_bsp_APIC(); + setup_local_APIC(); + map_cpu_to_logical_apicid(); + + + setup_portio_remap(); + + /* + * Scan the CPU present map and fire up the other CPUs via do_boot_cpu + * + * In clustered apic mode, phys_cpu_present_map is a constructed thus: + * bits 0-3 are quad0, 4-7 are quad1, etc. A perverse twist on the + * clustered apic ID. + */ + Dprintk("CPU present map: %lx\n", physids_coerce(phys_cpu_present_map)); + + kicked = 1; + for (bit = 0; kicked < NR_CPUS && bit < MAX_APICS; bit++) { + apicid = cpu_present_to_apicid(bit); + /* + * Don't even attempt to start the boot CPU! + */ + if ((apicid == boot_cpu_apicid) || (apicid == BAD_APICID)) + continue; + + if (!check_apicid_present(bit)) + continue; + if (max_cpus <= cpucount+1) + continue; + + if (((cpu = alloc_cpu_id()) <= 0) || do_boot_cpu(apicid, cpu)) + printk("CPU #%d not responding - cannot use it.\n", + apicid); + else + ++kicked; + } + + /* + * Cleanup possible dangling ends... + */ + smpboot_restore_warm_reset_vector(); + + /* + * Allow the user to impress friends. + */ + Dprintk("Before bogomips.\n"); + for (cpu = 0; cpu < NR_CPUS; cpu++) + if (cpu_isset(cpu, cpu_callout_map)) + bogosum += cpu_data[cpu].loops_per_jiffy; + printk(KERN_INFO + "Total of %d processors activated (%lu.%02lu BogoMIPS).\n", + cpucount+1, + bogosum/(500000/HZ), + (bogosum/(5000/HZ))%100); + + Dprintk("Before bogocount - setting activated=1.\n"); + + if (smp_b_stepping) + printk(KERN_WARNING "WARNING: SMP operation may be unreliable with B stepping processors.\n"); + + /* + * Don't taint if we are running SMP kernel on a single non-MP + * approved Athlon + */ + if (tainted & TAINT_UNSAFE_SMP) { + if (cpucount) + printk (KERN_INFO "WARNING: This combination of AMD processors is not suitable for SMP.\n"); + else + tainted &= ~TAINT_UNSAFE_SMP; + } + + Dprintk("Boot done.\n"); + + /* + * construct cpu_sibling_map[], so that we can tell sibling CPUs + * efficiently. + */ + for (cpu = 0; cpu < NR_CPUS; cpu++) { + cpus_clear(cpu_sibling_map[cpu]); + cpus_clear(cpu_core_map[cpu]); + } + + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); + + smpboot_setup_io_apic(); + + setup_boot_clock(); +} + +/* These are wrappers to interface to the new boot process. Someone + who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */ +void __init native_smp_prepare_cpus(unsigned int max_cpus) +{ + smp_commenced_mask = cpumask_of_cpu(0); + cpu_callin_map = cpumask_of_cpu(0); + mb(); + smp_boot_cpus(max_cpus); +} + +void __init native_smp_prepare_boot_cpu(void) +{ + unsigned int cpu = smp_processor_id(); + + init_gdt(cpu); + switch_to_new_gdt(); + + cpu_set(cpu, cpu_online_map); + cpu_set(cpu, cpu_callout_map); + cpu_set(cpu, cpu_present_map); + cpu_set(cpu, cpu_possible_map); + __get_cpu_var(cpu_state) = CPU_ONLINE; +} + +#ifdef CONFIG_HOTPLUG_CPU +void remove_siblinginfo(int cpu) +{ + int sibling; + struct cpuinfo_x86 *c = cpu_data; + + for_each_cpu_mask(sibling, cpu_core_map[cpu]) { + cpu_clear(cpu, cpu_core_map[sibling]); + /* + * last thread sibling in this cpu core going down + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) + c[sibling].booted_cores--; + } + + for_each_cpu_mask(sibling, cpu_sibling_map[cpu]) + cpu_clear(cpu, cpu_sibling_map[sibling]); + cpus_clear(cpu_sibling_map[cpu]); + cpus_clear(cpu_core_map[cpu]); + c[cpu].phys_proc_id = 0; + c[cpu].cpu_core_id = 0; + cpu_clear(cpu, cpu_sibling_setup_map); +} + +int __cpu_disable(void) +{ + cpumask_t map = cpu_online_map; + int cpu = smp_processor_id(); + + /* + * Perhaps use cpufreq to drop frequency, but that could go + * into generic code. + * + * We won't take down the boot processor on i386 due to some + * interrupts only being able to be serviced by the BSP. + * Especially so if we're not using an IOAPIC -zwane + */ + if (cpu == 0) + return -EBUSY; + if (nmi_watchdog == NMI_LOCAL_APIC) + stop_apic_nmi_watchdog(NULL); + clear_local_APIC(); + /* Allow any queued timer interrupts to get serviced */ + local_irq_enable(); + mdelay(1); + local_irq_disable(); + + remove_siblinginfo(cpu); + + cpu_clear(cpu, map); + fixup_irqs(map); + /* It's now safe to remove this processor from the online map */ + cpu_clear(cpu, cpu_online_map); + return 0; +} + +void __cpu_die(unsigned int cpu) +{ + /* We don't do anything here: idle task is faking death itself. */ + unsigned int i; + + for (i = 0; i < 10; i++) { + /* They ack this in play_dead by setting CPU_DEAD */ + if (per_cpu(cpu_state, cpu) == CPU_DEAD) { + printk ("CPU %d is now offline\n", cpu); + if (1 == num_online_cpus()) + alternatives_smp_switch(0); + return; + } + msleep(100); + } + printk(KERN_ERR "CPU %u didn't die...\n", cpu); +} +#else /* ... !CONFIG_HOTPLUG_CPU */ +int __cpu_disable(void) +{ + return -ENOSYS; +} + +void __cpu_die(unsigned int cpu) +{ + /* We said "no" in __cpu_disable */ + BUG(); +} +#endif /* CONFIG_HOTPLUG_CPU */ + +int __cpuinit native_cpu_up(unsigned int cpu) +{ + unsigned long flags; +#ifdef CONFIG_HOTPLUG_CPU + int ret = 0; + + /* + * We do warm boot only on cpus that had booted earlier + * Otherwise cold boot is all handled from smp_boot_cpus(). + * cpu_callin_map is set during AP kickstart process. Its reset + * when a cpu is taken offline from cpu_exit_clear(). + */ + if (!cpu_isset(cpu, cpu_callin_map)) + ret = __smp_prepare_cpu(cpu); + + if (ret) + return -EIO; +#endif + + /* In case one didn't come up */ + if (!cpu_isset(cpu, cpu_callin_map)) { + printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu); + return -EIO; + } + + per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; + /* Unleash the CPU! */ + cpu_set(cpu, smp_commenced_mask); + + /* + * Check TSC synchronization with the AP (keep irqs disabled + * while doing so): + */ + local_irq_save(flags); + check_tsc_sync_source(cpu); + local_irq_restore(flags); + + while (!cpu_isset(cpu, cpu_online_map)) { + cpu_relax(); + touch_nmi_watchdog(); + } + + return 0; +} + +void __init native_smp_cpus_done(unsigned int max_cpus) +{ +#ifdef CONFIG_X86_IO_APIC + setup_ioapic_dest(); +#endif + zap_low_mappings(); +#ifndef CONFIG_HOTPLUG_CPU + /* + * Disable executability of the SMP trampoline: + */ + set_kernel_exec((unsigned long)trampoline_base, trampoline_exec); +#endif +} + +void __init smp_intr_init(void) +{ + /* + * IRQ0 must be given a fixed assignment and initialized, + * because it's used before the IO-APIC is set up. + */ + set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]); + + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPI for invalidation */ + set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); + + /* IPI for generic function call */ + set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); +} + +/* + * If the BIOS enumerates physical processors before logical, + * maxcpus=N at enumeration-time can be used to disable HT. + */ +static int __init parse_maxcpus(char *arg) +{ + extern unsigned int maxcpus; + + maxcpus = simple_strtoul(arg, NULL, 0); + return 0; +} +early_param("maxcpus", parse_maxcpus); diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c new file mode 100644 index 000000000000..32f50783edc8 --- /dev/null +++ b/arch/x86/kernel/smpboot_64.c @@ -0,0 +1,1085 @@ +/* + * x86 SMP booting functions + * + * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> + * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> + * Copyright 2001 Andi Kleen, SuSE Labs. + * + * Much of the core SMP work is based on previous work by Thomas Radke, to + * whom a great many thanks are extended. + * + * Thanks to Intel for making available several different Pentium, + * Pentium Pro and Pentium-II/Xeon MP machines. + * Original development of Linux SMP code supported by Caldera. + * + * This code is released under the GNU General Public License version 2 + * + * Fixes + * Felix Koop : NR_CPUS used properly + * Jose Renau : Handle single CPU case. + * Alan Cox : By repeated request 8) - Total BogoMIP report. + * Greg Wright : Fix for kernel stacks panic. + * Erich Boleyn : MP v1.4 and additional changes. + * Matthias Sattler : Changes for 2.1 kernel map. + * Michel Lespinasse : Changes for 2.1 kernel map. + * Michael Chastain : Change trampoline.S to gnu as. + * Alan Cox : Dumb bug: 'B' step PPro's are fine + * Ingo Molnar : Added APIC timers, based on code + * from Jose Renau + * Ingo Molnar : various cleanups and rewrites + * Tigran Aivazian : fixed "0.00 in /proc/uptime on SMP" bug. + * Maciej W. Rozycki : Bits for genuine 82489DX APICs + * Andi Kleen : Changed for SMP boot into long mode. + * Rusty Russell : Hacked into shape for new "hotplug" boot process. + * Andi Kleen : Converted to new state machine. + * Various cleanups. + * Probably mostly hotplug CPU ready now. + * Ashok Raj : CPU hotplug support + */ + + +#include <linux/init.h> + +#include <linux/mm.h> +#include <linux/kernel_stat.h> +#include <linux/bootmem.h> +#include <linux/thread_info.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/mc146818rtc.h> +#include <linux/smp.h> +#include <linux/kdebug.h> + +#include <asm/mtrr.h> +#include <asm/pgalloc.h> +#include <asm/desc.h> +#include <asm/tlbflush.h> +#include <asm/proto.h> +#include <asm/nmi.h> +#include <asm/irq.h> +#include <asm/hw_irq.h> +#include <asm/numa.h> + +/* Number of siblings per CPU package */ +int smp_num_siblings = 1; +EXPORT_SYMBOL(smp_num_siblings); + +/* Last level cache ID of each logical CPU */ +u8 cpu_llc_id[NR_CPUS] __cpuinitdata = {[0 ... NR_CPUS-1] = BAD_APICID}; + +/* Bitmask of currently online CPUs */ +cpumask_t cpu_online_map __read_mostly; + +EXPORT_SYMBOL(cpu_online_map); + +/* + * Private maps to synchronize booting between AP and BP. + * Probably not needed anymore, but it makes for easier debugging. -AK + */ +cpumask_t cpu_callin_map; +cpumask_t cpu_callout_map; +EXPORT_SYMBOL(cpu_callout_map); + +cpumask_t cpu_possible_map; +EXPORT_SYMBOL(cpu_possible_map); + +/* Per CPU bogomips and other parameters */ +struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_data); + +/* Set when the idlers are all forked */ +int smp_threads_ready; + +/* representing HT siblings of each logical CPU */ +cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(cpu_sibling_map); + +/* representing HT and core siblings of each logical CPU */ +cpumask_t cpu_core_map[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(cpu_core_map); + +/* + * Trampoline 80x86 program as an array. + */ + +extern unsigned char trampoline_data[]; +extern unsigned char trampoline_end[]; + +/* State of each CPU */ +DEFINE_PER_CPU(int, cpu_state) = { 0 }; + +/* + * Store all idle threads, this can be reused instead of creating + * a new thread. Also avoids complicated thread destroy functionality + * for idle threads. + */ +struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; + +#define get_idle_for_cpu(x) (idle_thread_array[(x)]) +#define set_idle_for_cpu(x,p) (idle_thread_array[(x)] = (p)) + +/* + * Currently trivial. Write the real->protected mode + * bootstrap into the page concerned. The caller + * has made sure it's suitably aligned. + */ + +static unsigned long __cpuinit setup_trampoline(void) +{ + void *tramp = __va(SMP_TRAMPOLINE_BASE); + memcpy(tramp, trampoline_data, trampoline_end - trampoline_data); + return virt_to_phys(tramp); +} + +/* + * The bootstrap kernel entry code has set these up. Save them for + * a given CPU + */ + +static void __cpuinit smp_store_cpu_info(int id) +{ + struct cpuinfo_x86 *c = cpu_data + id; + + *c = boot_cpu_data; + identify_cpu(c); + print_cpu_info(c); +} + +static atomic_t init_deasserted __cpuinitdata; + +/* + * Report back to the Boot Processor. + * Running on AP. + */ +void __cpuinit smp_callin(void) +{ + int cpuid, phys_id; + unsigned long timeout; + + /* + * If waken up by an INIT in an 82489DX configuration + * we may get here before an INIT-deassert IPI reaches + * our local APIC. We have to wait for the IPI or we'll + * lock up on an APIC access. + */ + while (!atomic_read(&init_deasserted)) + cpu_relax(); + + /* + * (This works even if the APIC is not enabled.) + */ + phys_id = GET_APIC_ID(apic_read(APIC_ID)); + cpuid = smp_processor_id(); + if (cpu_isset(cpuid, cpu_callin_map)) { + panic("smp_callin: phys CPU#%d, CPU#%d already present??\n", + phys_id, cpuid); + } + Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id); + + /* + * STARTUP IPIs are fragile beasts as they might sometimes + * trigger some glue motherboard logic. Complete APIC bus + * silence for 1 second, this overestimates the time the + * boot CPU is spending to send the up to 2 STARTUP IPIs + * by a factor of two. This should be enough. + */ + + /* + * Waiting 2s total for startup (udelay is not yet working) + */ + timeout = jiffies + 2*HZ; + while (time_before(jiffies, timeout)) { + /* + * Has the boot CPU finished it's STARTUP sequence? + */ + if (cpu_isset(cpuid, cpu_callout_map)) + break; + cpu_relax(); + } + + if (!time_before(jiffies, timeout)) { + panic("smp_callin: CPU%d started up but did not get a callout!\n", + cpuid); + } + + /* + * the boot CPU has finished the init stage and is spinning + * on callin_map until we finish. We are free to set up this + * CPU, first the APIC. (this is probably redundant on most + * boards) + */ + + Dprintk("CALLIN, before setup_local_APIC().\n"); + setup_local_APIC(); + + /* + * Get our bogomips. + * + * Need to enable IRQs because it can take longer and then + * the NMI watchdog might kill us. + */ + local_irq_enable(); + calibrate_delay(); + local_irq_disable(); + Dprintk("Stack at about %p\n",&cpuid); + + disable_APIC_timer(); + + /* + * Save our processor parameters + */ + smp_store_cpu_info(cpuid); + + /* + * Allow the master to continue. + */ + cpu_set(cpuid, cpu_callin_map); +} + +/* maps the cpu to the sched domain representing multi-core */ +cpumask_t cpu_coregroup_map(int cpu) +{ + struct cpuinfo_x86 *c = cpu_data + cpu; + /* + * For perf, we return last level cache shared map. + * And for power savings, we return cpu_core_map + */ + if (sched_mc_power_savings || sched_smt_power_savings) + return cpu_core_map[cpu]; + else + return c->llc_shared_map; +} + +/* representing cpus for which sibling maps can be computed */ +static cpumask_t cpu_sibling_setup_map; + +static inline void set_cpu_sibling_map(int cpu) +{ + int i; + struct cpuinfo_x86 *c = cpu_data; + + cpu_set(cpu, cpu_sibling_setup_map); + + if (smp_num_siblings > 1) { + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (c[cpu].phys_proc_id == c[i].phys_proc_id && + c[cpu].cpu_core_id == c[i].cpu_core_id) { + cpu_set(i, cpu_sibling_map[cpu]); + cpu_set(cpu, cpu_sibling_map[i]); + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); + } + } + } else { + cpu_set(cpu, cpu_sibling_map[cpu]); + } + + cpu_set(cpu, c[cpu].llc_shared_map); + + if (current_cpu_data.x86_max_cores == 1) { + cpu_core_map[cpu] = cpu_sibling_map[cpu]; + c[cpu].booted_cores = 1; + return; + } + + for_each_cpu_mask(i, cpu_sibling_setup_map) { + if (cpu_llc_id[cpu] != BAD_APICID && + cpu_llc_id[cpu] == cpu_llc_id[i]) { + cpu_set(i, c[cpu].llc_shared_map); + cpu_set(cpu, c[i].llc_shared_map); + } + if (c[cpu].phys_proc_id == c[i].phys_proc_id) { + cpu_set(i, cpu_core_map[cpu]); + cpu_set(cpu, cpu_core_map[i]); + /* + * Does this new cpu bringup a new core? + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) { + /* + * for each core in package, increment + * the booted_cores for this new cpu + */ + if (first_cpu(cpu_sibling_map[i]) == i) + c[cpu].booted_cores++; + /* + * increment the core count for all + * the other cpus in this package + */ + if (i != cpu) + c[i].booted_cores++; + } else if (i != cpu && !c[cpu].booted_cores) + c[cpu].booted_cores = c[i].booted_cores; + } + } +} + +/* + * Setup code on secondary processor (after comming out of the trampoline) + */ +void __cpuinit start_secondary(void) +{ + /* + * Dont put anything before smp_callin(), SMP + * booting is too fragile that we want to limit the + * things done here to the most necessary things. + */ + cpu_init(); + preempt_disable(); + smp_callin(); + + /* otherwise gcc will move up the smp_processor_id before the cpu_init */ + barrier(); + + /* + * Check TSC sync first: + */ + check_tsc_sync_target(); + + Dprintk("cpu %d: setting up apic clock\n", smp_processor_id()); + setup_secondary_APIC_clock(); + + Dprintk("cpu %d: enabling apic timer\n", smp_processor_id()); + + if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); + enable_NMI_through_LVT0(NULL); + enable_8259A_irq(0); + } + + enable_APIC_timer(); + + /* + * The sibling maps must be set before turing the online map on for + * this cpu + */ + set_cpu_sibling_map(smp_processor_id()); + + /* + * We need to hold call_lock, so there is no inconsistency + * between the time smp_call_function() determines number of + * IPI receipients, and the time when the determination is made + * for which cpus receive the IPI in genapic_flat.c. Holding this + * lock helps us to not include this cpu in a currently in progress + * smp_call_function(). + */ + lock_ipi_call_lock(); + spin_lock(&vector_lock); + + /* Setup the per cpu irq handling data structures */ + __setup_vector_irq(smp_processor_id()); + /* + * Allow the master to continue. + */ + cpu_set(smp_processor_id(), cpu_online_map); + per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; + spin_unlock(&vector_lock); + + unlock_ipi_call_lock(); + + cpu_idle(); +} + +extern volatile unsigned long init_rsp; +extern void (*initial_code)(void); + +#ifdef APIC_DEBUG +static void inquire_remote_apic(int apicid) +{ + unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 }; + char *names[] = { "ID", "VERSION", "SPIV" }; + int timeout; + unsigned int status; + + printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid); + + for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) { + printk("... APIC #%d %s: ", apicid, names[i]); + + /* + * Wait for idle. + */ + status = safe_apic_wait_icr_idle(); + if (status) + printk("a previous APIC delivery may have failed\n"); + + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); + apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]); + + timeout = 0; + do { + udelay(100); + status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK; + } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000); + + switch (status) { + case APIC_ICR_RR_VALID: + status = apic_read(APIC_RRR); + printk("%08x\n", status); + break; + default: + printk("failed\n"); + } + } +} +#endif + +/* + * Kick the secondary to wake up. + */ +static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_rip) +{ + unsigned long send_status, accept_status = 0; + int maxlvt, num_starts, j; + + Dprintk("Asserting INIT.\n"); + + /* + * Turn INIT on target chip + */ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); + + /* + * Send IPI + */ + apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT + | APIC_DM_INIT); + + Dprintk("Waiting for send to finish...\n"); + send_status = safe_apic_wait_icr_idle(); + + mdelay(10); + + Dprintk("Deasserting INIT.\n"); + + /* Target chip */ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); + + /* Send IPI */ + apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); + + Dprintk("Waiting for send to finish...\n"); + send_status = safe_apic_wait_icr_idle(); + + mb(); + atomic_set(&init_deasserted, 1); + + num_starts = 2; + + /* + * Run STARTUP IPI loop. + */ + Dprintk("#startup loops: %d.\n", num_starts); + + maxlvt = get_maxlvt(); + + for (j = 1; j <= num_starts; j++) { + Dprintk("Sending STARTUP #%d.\n",j); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + Dprintk("After apic_write.\n"); + + /* + * STARTUP IPI + */ + + /* Target chip */ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); + + /* Boot on the stack */ + /* Kick the second */ + apic_write(APIC_ICR, APIC_DM_STARTUP | (start_rip >> 12)); + + /* + * Give the other CPU some time to accept the IPI. + */ + udelay(300); + + Dprintk("Startup point 1.\n"); + + Dprintk("Waiting for send to finish...\n"); + send_status = safe_apic_wait_icr_idle(); + + /* + * Give the other CPU some time to accept the IPI. + */ + udelay(200); + /* + * Due to the Pentium erratum 3AP. + */ + if (maxlvt > 3) { + apic_write(APIC_ESR, 0); + } + accept_status = (apic_read(APIC_ESR) & 0xEF); + if (send_status || accept_status) + break; + } + Dprintk("After Startup.\n"); + + if (send_status) + printk(KERN_ERR "APIC never delivered???\n"); + if (accept_status) + printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status); + + return (send_status | accept_status); +} + +struct create_idle { + struct work_struct work; + struct task_struct *idle; + struct completion done; + int cpu; +}; + +void do_fork_idle(struct work_struct *work) +{ + struct create_idle *c_idle = + container_of(work, struct create_idle, work); + + c_idle->idle = fork_idle(c_idle->cpu); + complete(&c_idle->done); +} + +/* + * Boot one CPU. + */ +static int __cpuinit do_boot_cpu(int cpu, int apicid) +{ + unsigned long boot_error; + int timeout; + unsigned long start_rip; + struct create_idle c_idle = { + .work = __WORK_INITIALIZER(c_idle.work, do_fork_idle), + .cpu = cpu, + .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), + }; + + /* allocate memory for gdts of secondary cpus. Hotplug is considered */ + if (!cpu_gdt_descr[cpu].address && + !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) { + printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu); + return -1; + } + + /* Allocate node local memory for AP pdas */ + if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) { + struct x8664_pda *newpda, *pda; + int node = cpu_to_node(cpu); + pda = cpu_pda(cpu); + newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC, + node); + if (newpda) { + memcpy(newpda, pda, sizeof (struct x8664_pda)); + cpu_pda(cpu) = newpda; + } else + printk(KERN_ERR + "Could not allocate node local PDA for CPU %d on node %d\n", + cpu, node); + } + + alternatives_smp_switch(1); + + c_idle.idle = get_idle_for_cpu(cpu); + + if (c_idle.idle) { + c_idle.idle->thread.rsp = (unsigned long) (((struct pt_regs *) + (THREAD_SIZE + task_stack_page(c_idle.idle))) - 1); + init_idle(c_idle.idle, cpu); + goto do_rest; + } + + /* + * During cold boot process, keventd thread is not spun up yet. + * When we do cpu hot-add, we create idle threads on the fly, we should + * not acquire any attributes from the calling context. Hence the clean + * way to create kernel_threads() is to do that from keventd(). + * We do the current_is_keventd() due to the fact that ACPI notifier + * was also queuing to keventd() and when the caller is already running + * in context of keventd(), we would end up with locking up the keventd + * thread. + */ + if (!keventd_up() || current_is_keventd()) + c_idle.work.func(&c_idle.work); + else { + schedule_work(&c_idle.work); + wait_for_completion(&c_idle.done); + } + + if (IS_ERR(c_idle.idle)) { + printk("failed fork for CPU %d\n", cpu); + return PTR_ERR(c_idle.idle); + } + + set_idle_for_cpu(cpu, c_idle.idle); + +do_rest: + + cpu_pda(cpu)->pcurrent = c_idle.idle; + + start_rip = setup_trampoline(); + + init_rsp = c_idle.idle->thread.rsp; + per_cpu(init_tss,cpu).rsp0 = init_rsp; + initial_code = start_secondary; + clear_tsk_thread_flag(c_idle.idle, TIF_FORK); + + printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu, + cpus_weight(cpu_present_map), + apicid); + + /* + * This grunge runs the startup process for + * the targeted processor. + */ + + atomic_set(&init_deasserted, 0); + + Dprintk("Setting warm reset code and vector.\n"); + + CMOS_WRITE(0xa, 0xf); + local_flush_tlb(); + Dprintk("1.\n"); + *((volatile unsigned short *) phys_to_virt(0x469)) = start_rip >> 4; + Dprintk("2.\n"); + *((volatile unsigned short *) phys_to_virt(0x467)) = start_rip & 0xf; + Dprintk("3.\n"); + + /* + * Be paranoid about clearing APIC errors. + */ + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + + /* + * Status is now clean + */ + boot_error = 0; + + /* + * Starting actual IPI sequence... + */ + boot_error = wakeup_secondary_via_INIT(apicid, start_rip); + + if (!boot_error) { + /* + * allow APs to start initializing. + */ + Dprintk("Before Callout %d.\n", cpu); + cpu_set(cpu, cpu_callout_map); + Dprintk("After Callout %d.\n", cpu); + + /* + * Wait 5s total for a response + */ + for (timeout = 0; timeout < 50000; timeout++) { + if (cpu_isset(cpu, cpu_callin_map)) + break; /* It has booted */ + udelay(100); + } + + if (cpu_isset(cpu, cpu_callin_map)) { + /* number CPUs logically, starting from 1 (BSP is 0) */ + Dprintk("CPU has booted.\n"); + } else { + boot_error = 1; + if (*((volatile unsigned char *)phys_to_virt(SMP_TRAMPOLINE_BASE)) + == 0xA5) + /* trampoline started but...? */ + printk("Stuck ??\n"); + else + /* trampoline code not run */ + printk("Not responding.\n"); +#ifdef APIC_DEBUG + inquire_remote_apic(apicid); +#endif + } + } + if (boot_error) { + cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */ + clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */ + clear_node_cpumask(cpu); /* was set by numa_add_cpu */ + cpu_clear(cpu, cpu_present_map); + cpu_clear(cpu, cpu_possible_map); + x86_cpu_to_apicid[cpu] = BAD_APICID; + x86_cpu_to_log_apicid[cpu] = BAD_APICID; + return -EIO; + } + + return 0; +} + +cycles_t cacheflush_time; +unsigned long cache_decay_ticks; + +/* + * Cleanup possible dangling ends... + */ +static __cpuinit void smp_cleanup_boot(void) +{ + /* + * Paranoid: Set warm reset code and vector here back + * to default values. + */ + CMOS_WRITE(0, 0xf); + + /* + * Reset trampoline flag + */ + *((volatile int *) phys_to_virt(0x467)) = 0; +} + +/* + * Fall back to non SMP mode after errors. + * + * RED-PEN audit/test this more. I bet there is more state messed up here. + */ +static __init void disable_smp(void) +{ + cpu_present_map = cpumask_of_cpu(0); + cpu_possible_map = cpumask_of_cpu(0); + if (smp_found_config) + phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id); + else + phys_cpu_present_map = physid_mask_of_physid(0); + cpu_set(0, cpu_sibling_map[0]); + cpu_set(0, cpu_core_map[0]); +} + +#ifdef CONFIG_HOTPLUG_CPU + +int additional_cpus __initdata = -1; + +/* + * cpu_possible_map should be static, it cannot change as cpu's + * are onlined, or offlined. The reason is per-cpu data-structures + * are allocated by some modules at init time, and dont expect to + * do this dynamically on cpu arrival/departure. + * cpu_present_map on the other hand can change dynamically. + * In case when cpu_hotplug is not compiled, then we resort to current + * behaviour, which is cpu_possible == cpu_present. + * - Ashok Raj + * + * Three ways to find out the number of additional hotplug CPUs: + * - If the BIOS specified disabled CPUs in ACPI/mptables use that. + * - The user can overwrite it with additional_cpus=NUM + * - Otherwise don't reserve additional CPUs. + * We do this because additional CPUs waste a lot of memory. + * -AK + */ +__init void prefill_possible_map(void) +{ + int i; + int possible; + + if (additional_cpus == -1) { + if (disabled_cpus > 0) + additional_cpus = disabled_cpus; + else + additional_cpus = 0; + } + possible = num_processors + additional_cpus; + if (possible > NR_CPUS) + possible = NR_CPUS; + + printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", + possible, + max_t(int, possible - num_processors, 0)); + + for (i = 0; i < possible; i++) + cpu_set(i, cpu_possible_map); +} +#endif + +/* + * Various sanity checks. + */ +static int __init smp_sanity_check(unsigned max_cpus) +{ + if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) { + printk("weird, boot CPU (#%d) not listed by the BIOS.\n", + hard_smp_processor_id()); + physid_set(hard_smp_processor_id(), phys_cpu_present_map); + } + + /* + * If we couldn't find an SMP configuration at boot time, + * get out of here now! + */ + if (!smp_found_config) { + printk(KERN_NOTICE "SMP motherboard not detected.\n"); + disable_smp(); + if (APIC_init_uniprocessor()) + printk(KERN_NOTICE "Local APIC not detected." + " Using dummy APIC emulation.\n"); + return -1; + } + + /* + * Should not be necessary because the MP table should list the boot + * CPU too, but we do it for the sake of robustness anyway. + */ + if (!physid_isset(boot_cpu_id, phys_cpu_present_map)) { + printk(KERN_NOTICE "weird, boot CPU (#%d) not listed by the BIOS.\n", + boot_cpu_id); + physid_set(hard_smp_processor_id(), phys_cpu_present_map); + } + + /* + * If we couldn't find a local APIC, then get out of here now! + */ + if (!cpu_has_apic) { + printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_id); + printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n"); + nr_ioapics = 0; + return -1; + } + + /* + * If SMP should be disabled, then really disable it! + */ + if (!max_cpus) { + printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n"); + nr_ioapics = 0; + return -1; + } + + return 0; +} + +/* + * Prepare for SMP bootup. The MP table or ACPI has been read + * earlier. Just do some sanity checking here and enable APIC mode. + */ +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + nmi_watchdog_default(); + current_cpu_data = boot_cpu_data; + current_thread_info()->cpu = 0; /* needed? */ + set_cpu_sibling_map(0); + + if (smp_sanity_check(max_cpus) < 0) { + printk(KERN_INFO "SMP disabled\n"); + disable_smp(); + return; + } + + + /* + * Switch from PIC to APIC mode. + */ + setup_local_APIC(); + + if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id) { + panic("Boot APIC ID in local APIC unexpected (%d vs %d)", + GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_id); + /* Or can we switch back to PIC here? */ + } + + /* + * Now start the IO-APICs + */ + if (!skip_ioapic_setup && nr_ioapics) + setup_IO_APIC(); + else + nr_ioapics = 0; + + /* + * Set up local APIC timer on boot CPU. + */ + + setup_boot_APIC_clock(); +} + +/* + * Early setup to make printk work. + */ +void __init smp_prepare_boot_cpu(void) +{ + int me = smp_processor_id(); + cpu_set(me, cpu_online_map); + cpu_set(me, cpu_callout_map); + per_cpu(cpu_state, me) = CPU_ONLINE; +} + +/* + * Entry point to boot a CPU. + */ +int __cpuinit __cpu_up(unsigned int cpu) +{ + int apicid = cpu_present_to_apicid(cpu); + unsigned long flags; + int err; + + WARN_ON(irqs_disabled()); + + Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu); + + if (apicid == BAD_APICID || apicid == boot_cpu_id || + !physid_isset(apicid, phys_cpu_present_map)) { + printk("__cpu_up: bad cpu %d\n", cpu); + return -EINVAL; + } + + /* + * Already booted CPU? + */ + if (cpu_isset(cpu, cpu_callin_map)) { + Dprintk("do_boot_cpu %d Already started\n", cpu); + return -ENOSYS; + } + + /* + * Save current MTRR state in case it was changed since early boot + * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync: + */ + mtrr_save_state(); + + per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; + /* Boot it! */ + err = do_boot_cpu(cpu, apicid); + if (err < 0) { + Dprintk("do_boot_cpu failed %d\n", err); + return err; + } + + /* Unleash the CPU! */ + Dprintk("waiting for cpu %d\n", cpu); + + /* + * Make sure and check TSC sync: + */ + local_irq_save(flags); + check_tsc_sync_source(cpu); + local_irq_restore(flags); + + while (!cpu_isset(cpu, cpu_online_map)) + cpu_relax(); + err = 0; + + return err; +} + +/* + * Finish the SMP boot. + */ +void __init smp_cpus_done(unsigned int max_cpus) +{ + smp_cleanup_boot(); + setup_ioapic_dest(); + check_nmi_watchdog(); +} + +#ifdef CONFIG_HOTPLUG_CPU + +static void remove_siblinginfo(int cpu) +{ + int sibling; + struct cpuinfo_x86 *c = cpu_data; + + for_each_cpu_mask(sibling, cpu_core_map[cpu]) { + cpu_clear(cpu, cpu_core_map[sibling]); + /* + * last thread sibling in this cpu core going down + */ + if (cpus_weight(cpu_sibling_map[cpu]) == 1) + c[sibling].booted_cores--; + } + + for_each_cpu_mask(sibling, cpu_sibling_map[cpu]) + cpu_clear(cpu, cpu_sibling_map[sibling]); + cpus_clear(cpu_sibling_map[cpu]); + cpus_clear(cpu_core_map[cpu]); + c[cpu].phys_proc_id = 0; + c[cpu].cpu_core_id = 0; + cpu_clear(cpu, cpu_sibling_setup_map); +} + +void remove_cpu_from_maps(void) +{ + int cpu = smp_processor_id(); + + cpu_clear(cpu, cpu_callout_map); + cpu_clear(cpu, cpu_callin_map); + clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */ + clear_node_cpumask(cpu); +} + +int __cpu_disable(void) +{ + int cpu = smp_processor_id(); + + /* + * Perhaps use cpufreq to drop frequency, but that could go + * into generic code. + * + * We won't take down the boot processor on i386 due to some + * interrupts only being able to be serviced by the BSP. + * Especially so if we're not using an IOAPIC -zwane + */ + if (cpu == 0) + return -EBUSY; + + if (nmi_watchdog == NMI_LOCAL_APIC) + stop_apic_nmi_watchdog(NULL); + clear_local_APIC(); + + /* + * HACK: + * Allow any queued timer interrupts to get serviced + * This is only a temporary solution until we cleanup + * fixup_irqs as we do for IA64. + */ + local_irq_enable(); + mdelay(1); + + local_irq_disable(); + remove_siblinginfo(cpu); + + spin_lock(&vector_lock); + /* It's now safe to remove this processor from the online map */ + cpu_clear(cpu, cpu_online_map); + spin_unlock(&vector_lock); + remove_cpu_from_maps(); + fixup_irqs(cpu_online_map); + return 0; +} + +void __cpu_die(unsigned int cpu) +{ + /* We don't do anything here: idle task is faking death itself. */ + unsigned int i; + + for (i = 0; i < 10; i++) { + /* They ack this in play_dead by setting CPU_DEAD */ + if (per_cpu(cpu_state, cpu) == CPU_DEAD) { + printk ("CPU %d is now offline\n", cpu); + if (1 == num_online_cpus()) + alternatives_smp_switch(0); + return; + } + msleep(100); + } + printk(KERN_ERR "CPU %u didn't die...\n", cpu); +} + +static __init int setup_additional_cpus(char *s) +{ + return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL; +} +early_param("additional_cpus", setup_additional_cpus); + +#else /* ... !CONFIG_HOTPLUG_CPU */ + +int __cpu_disable(void) +{ + return -ENOSYS; +} + +void __cpu_die(unsigned int cpu) +{ + /* We said "no" in __cpu_disable */ + BUG(); +} +#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/x86/kernel/smpcommon_32.c b/arch/x86/kernel/smpcommon_32.c new file mode 100644 index 000000000000..bbfe85a0f699 --- /dev/null +++ b/arch/x86/kernel/smpcommon_32.c @@ -0,0 +1,81 @@ +/* + * SMP stuff which is common to all sub-architectures. + */ +#include <linux/module.h> +#include <asm/smp.h> + +DEFINE_PER_CPU(unsigned long, this_cpu_off); +EXPORT_PER_CPU_SYMBOL(this_cpu_off); + +/* Initialize the CPU's GDT. This is either the boot CPU doing itself + (still using the master per-cpu area), or a CPU doing it for a + secondary which will soon come up. */ +__cpuinit void init_gdt(int cpu) +{ + struct desc_struct *gdt = get_cpu_gdt_table(cpu); + + pack_descriptor((u32 *)&gdt[GDT_ENTRY_PERCPU].a, + (u32 *)&gdt[GDT_ENTRY_PERCPU].b, + __per_cpu_offset[cpu], 0xFFFFF, + 0x80 | DESCTYPE_S | 0x2, 0x8); + + per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu]; + per_cpu(cpu_number, cpu) = cpu; +} + + +/** + * smp_call_function(): Run a function on all other CPUs. + * @func: The function to run. This must be fast and non-blocking. + * @info: An arbitrary pointer to pass to the function. + * @nonatomic: Unused. + * @wait: If true, wait (atomically) until function has completed on other CPUs. + * + * Returns 0 on success, else a negative status code. + * + * If @wait is true, then returns once @func has returned; otherwise + * it returns just before the target cpu calls @func. + * + * You must not call this function with disabled interrupts or from a + * hardware interrupt handler or from a bottom half handler. + */ +int smp_call_function(void (*func) (void *info), void *info, int nonatomic, + int wait) +{ + return smp_call_function_mask(cpu_online_map, func, info, wait); +} +EXPORT_SYMBOL(smp_call_function); + +/** + * smp_call_function_single - Run a function on a specific CPU + * @cpu: The target CPU. Cannot be the calling CPU. + * @func: The function to run. This must be fast and non-blocking. + * @info: An arbitrary pointer to pass to the function. + * @nonatomic: Unused. + * @wait: If true, wait until function has completed on other CPUs. + * + * Returns 0 on success, else a negative status code. + * + * If @wait is true, then returns once @func has returned; otherwise + * it returns just before the target cpu calls @func. + */ +int smp_call_function_single(int cpu, void (*func) (void *info), void *info, + int nonatomic, int wait) +{ + /* prevent preemption and reschedule on another processor */ + int ret; + int me = get_cpu(); + if (cpu == me) { + local_irq_disable(); + func(info); + local_irq_enable(); + put_cpu(); + return 0; + } + + ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait); + + put_cpu(); + return ret; +} +EXPORT_SYMBOL(smp_call_function_single); diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c new file mode 100644 index 000000000000..2a8713ec0f9a --- /dev/null +++ b/arch/x86/kernel/srat_32.c @@ -0,0 +1,360 @@ +/* + * Some of the code in this file has been gleaned from the 64 bit + * discontigmem support code base. + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to Pat Gaughen <gone@us.ibm.com> + */ +#include <linux/mm.h> +#include <linux/bootmem.h> +#include <linux/mmzone.h> +#include <linux/acpi.h> +#include <linux/nodemask.h> +#include <asm/srat.h> +#include <asm/topology.h> +#include <asm/smp.h> + +/* + * proximity macros and definitions + */ +#define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */ +#define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */ +#define BMAP_SET(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit)) +#define BMAP_TEST(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit))) +/* bitmap length; _PXM is at most 255 */ +#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) +static u8 pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */ + +#define MAX_CHUNKS_PER_NODE 3 +#define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES) +struct node_memory_chunk_s { + unsigned long start_pfn; + unsigned long end_pfn; + u8 pxm; // proximity domain of node + u8 nid; // which cnode contains this chunk? + u8 bank; // which mem bank on this node +}; +static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS]; + +static int num_memory_chunks; /* total number of memory chunks */ +static u8 __initdata apicid_to_pxm[MAX_APICID]; + +extern void * boot_ioremap(unsigned long, unsigned long); + +/* Identify CPU proximity domains */ +static void __init parse_cpu_affinity_structure(char *p) +{ + struct acpi_srat_cpu_affinity *cpu_affinity = + (struct acpi_srat_cpu_affinity *) p; + + if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0) + return; /* empty entry */ + + /* mark this node as "seen" in node bitmap */ + BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo); + + apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo; + + printk("CPU 0x%02X in proximity domain 0x%02X\n", + cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo); +} + +/* + * Identify memory proximity domains and hot-remove capabilities. + * Fill node memory chunk list structure. + */ +static void __init parse_memory_affinity_structure (char *sratp) +{ + unsigned long long paddr, size; + unsigned long start_pfn, end_pfn; + u8 pxm; + struct node_memory_chunk_s *p, *q, *pend; + struct acpi_srat_mem_affinity *memory_affinity = + (struct acpi_srat_mem_affinity *) sratp; + + if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0) + return; /* empty entry */ + + pxm = memory_affinity->proximity_domain & 0xff; + + /* mark this node as "seen" in node bitmap */ + BMAP_SET(pxm_bitmap, pxm); + + /* calculate info for memory chunk structure */ + paddr = memory_affinity->base_address; + size = memory_affinity->length; + + start_pfn = paddr >> PAGE_SHIFT; + end_pfn = (paddr + size) >> PAGE_SHIFT; + + + if (num_memory_chunks >= MAXCHUNKS) { + printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n", + size/(1024*1024), paddr); + return; + } + + /* Insertion sort based on base address */ + pend = &node_memory_chunk[num_memory_chunks]; + for (p = &node_memory_chunk[0]; p < pend; p++) { + if (start_pfn < p->start_pfn) + break; + } + if (p < pend) { + for (q = pend; q >= p; q--) + *(q + 1) = *q; + } + p->start_pfn = start_pfn; + p->end_pfn = end_pfn; + p->pxm = pxm; + + num_memory_chunks++; + + printk("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n", + start_pfn, end_pfn, + memory_affinity->memory_type, + pxm, + ((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ? + "enabled and removable" : "enabled" ) ); +} + +/* + * The SRAT table always lists ascending addresses, so can always + * assume that the first "start" address that you see is the real + * start of the node, and that the current "end" address is after + * the previous one. + */ +static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk) +{ + /* + * Only add present memory as told by the e820. + * There is no guarantee from the SRAT that the memory it + * enumerates is present at boot time because it represents + * *possible* memory hotplug areas the same as normal RAM. + */ + if (memory_chunk->start_pfn >= max_pfn) { + printk (KERN_INFO "Ignoring SRAT pfns: 0x%08lx -> %08lx\n", + memory_chunk->start_pfn, memory_chunk->end_pfn); + return; + } + if (memory_chunk->nid != nid) + return; + + if (!node_has_online_mem(nid)) + node_start_pfn[nid] = memory_chunk->start_pfn; + + if (node_start_pfn[nid] > memory_chunk->start_pfn) + node_start_pfn[nid] = memory_chunk->start_pfn; + + if (node_end_pfn[nid] < memory_chunk->end_pfn) + node_end_pfn[nid] = memory_chunk->end_pfn; +} + +/* Parse the ACPI Static Resource Affinity Table */ +static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) +{ + u8 *start, *end, *p; + int i, j, nid; + + start = (u8 *)(&(sratp->reserved) + 1); /* skip header */ + p = start; + end = (u8 *)sratp + sratp->header.length; + + memset(pxm_bitmap, 0, sizeof(pxm_bitmap)); /* init proximity domain bitmap */ + memset(node_memory_chunk, 0, sizeof(node_memory_chunk)); + + num_memory_chunks = 0; + while (p < end) { + switch (*p) { + case ACPI_SRAT_TYPE_CPU_AFFINITY: + parse_cpu_affinity_structure(p); + break; + case ACPI_SRAT_TYPE_MEMORY_AFFINITY: + parse_memory_affinity_structure(p); + break; + default: + printk("ACPI 2.0 SRAT: unknown entry skipped: type=0x%02X, len=%d\n", p[0], p[1]); + break; + } + p += p[1]; + if (p[1] == 0) { + printk("acpi20_parse_srat: Entry length value is zero;" + " can't parse any further!\n"); + break; + } + } + + if (num_memory_chunks == 0) { + printk("could not finy any ACPI SRAT memory areas.\n"); + goto out_fail; + } + + /* Calculate total number of nodes in system from PXM bitmap and create + * a set of sequential node IDs starting at zero. (ACPI doesn't seem + * to specify the range of _PXM values.) + */ + /* + * MCD - we no longer HAVE to number nodes sequentially. PXM domain + * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically + * 32, so we will continue numbering them in this manner until MAX_NUMNODES + * approaches MAX_PXM_DOMAINS for i386. + */ + nodes_clear(node_online_map); + for (i = 0; i < MAX_PXM_DOMAINS; i++) { + if (BMAP_TEST(pxm_bitmap, i)) { + int nid = acpi_map_pxm_to_node(i); + node_set_online(nid); + } + } + BUG_ON(num_online_nodes() == 0); + + /* set cnode id in memory chunk structure */ + for (i = 0; i < num_memory_chunks; i++) + node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm); + + printk("pxm bitmap: "); + for (i = 0; i < sizeof(pxm_bitmap); i++) { + printk("%02X ", pxm_bitmap[i]); + } + printk("\n"); + printk("Number of logical nodes in system = %d\n", num_online_nodes()); + printk("Number of memory chunks in system = %d\n", num_memory_chunks); + + for (i = 0; i < MAX_APICID; i++) + apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]); + + for (j = 0; j < num_memory_chunks; j++){ + struct node_memory_chunk_s * chunk = &node_memory_chunk[j]; + printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n", + j, chunk->nid, chunk->start_pfn, chunk->end_pfn); + node_read_chunk(chunk->nid, chunk); + add_active_range(chunk->nid, chunk->start_pfn, chunk->end_pfn); + } + + for_each_online_node(nid) { + unsigned long start = node_start_pfn[nid]; + unsigned long end = node_end_pfn[nid]; + + memory_present(nid, start, end); + node_remap_size[nid] = node_memmap_size_bytes(nid, start, end); + } + return 1; +out_fail: + return 0; +} + +struct acpi_static_rsdt { + struct acpi_table_rsdt table; + u32 padding[7]; /* Allow for 7 more table entries */ +}; + +int __init get_memcfg_from_srat(void) +{ + struct acpi_table_header *header = NULL; + struct acpi_table_rsdp *rsdp = NULL; + struct acpi_table_rsdt *rsdt = NULL; + acpi_native_uint rsdp_address = 0; + struct acpi_static_rsdt saved_rsdt; + int tables = 0; + int i = 0; + + rsdp_address = acpi_find_rsdp(); + if (!rsdp_address) { + printk("%s: System description tables not found\n", + __FUNCTION__); + goto out_err; + } + + printk("%s: assigning address to rsdp\n", __FUNCTION__); + rsdp = (struct acpi_table_rsdp *)(u32)rsdp_address; + if (!rsdp) { + printk("%s: Didn't find ACPI root!\n", __FUNCTION__); + goto out_err; + } + + printk(KERN_INFO "%.8s v%d [%.6s]\n", rsdp->signature, rsdp->revision, + rsdp->oem_id); + + if (strncmp(rsdp->signature, ACPI_SIG_RSDP,strlen(ACPI_SIG_RSDP))) { + printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __FUNCTION__); + goto out_err; + } + + rsdt = (struct acpi_table_rsdt *) + boot_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt)); + + if (!rsdt) { + printk(KERN_WARNING + "%s: ACPI: Invalid root system description tables (RSDT)\n", + __FUNCTION__); + goto out_err; + } + + header = &rsdt->header; + + if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) { + printk(KERN_WARNING "ACPI: RSDT signature incorrect\n"); + goto out_err; + } + + /* + * The number of tables is computed by taking the + * size of all entries (header size minus total + * size of RSDT) divided by the size of each entry + * (4-byte table pointers). + */ + tables = (header->length - sizeof(struct acpi_table_header)) / 4; + + if (!tables) + goto out_err; + + memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt)); + + if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) { + printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n", + saved_rsdt.table.header.length); + goto out_err; + } + + printk("Begin SRAT table scan....\n"); + + for (i = 0; i < tables; i++) { + /* Map in header, then map in full table length. */ + header = (struct acpi_table_header *) + boot_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header)); + if (!header) + break; + header = (struct acpi_table_header *) + boot_ioremap(saved_rsdt.table.table_offset_entry[i], header->length); + if (!header) + break; + + if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) + continue; + + /* we've found the srat table. don't need to look at any more tables */ + return acpi20_parse_srat((struct acpi_table_srat *)header); + } +out_err: + remove_all_active_ranges(); + printk("failed to get NUMA memory information from SRAT table\n"); + return 0; +} diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c new file mode 100644 index 000000000000..cb9109113584 --- /dev/null +++ b/arch/x86/kernel/stacktrace.c @@ -0,0 +1,54 @@ +/* + * arch/x86_64/kernel/stacktrace.c + * + * Stack trace management functions + * + * Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> + */ +#include <linux/sched.h> +#include <linux/stacktrace.h> +#include <linux/module.h> +#include <asm/stacktrace.h> + +static void save_stack_warning(void *data, char *msg) +{ +} + +static void +save_stack_warning_symbol(void *data, char *msg, unsigned long symbol) +{ +} + +static int save_stack_stack(void *data, char *name) +{ + return -1; +} + +static void save_stack_address(void *data, unsigned long addr) +{ + struct stack_trace *trace = (struct stack_trace *)data; + if (trace->skip > 0) { + trace->skip--; + return; + } + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = addr; +} + +static struct stacktrace_ops save_stack_ops = { + .warning = save_stack_warning, + .warning_symbol = save_stack_warning_symbol, + .stack = save_stack_stack, + .address = save_stack_address, +}; + +/* + * Save stack-backtrace addresses into a stack_trace buffer. + */ +void save_stack_trace(struct stack_trace *trace) +{ + dump_trace(current, NULL, NULL, &save_stack_ops, trace); + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = ULONG_MAX; +} +EXPORT_SYMBOL(save_stack_trace); diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c new file mode 100644 index 000000000000..d0e01a3acf35 --- /dev/null +++ b/arch/x86/kernel/summit_32.c @@ -0,0 +1,180 @@ +/* + * arch/i386/kernel/summit.c - IBM Summit-Specific Code + * + * Written By: Matthew Dobson, IBM Corporation + * + * Copyright (c) 2003 IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <colpatch@us.ibm.com> + * + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <asm/io.h> +#include <asm/mach-summit/mach_mpparse.h> + +static struct rio_table_hdr *rio_table_hdr __initdata; +static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata; +static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata; + +static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus) +{ + int twister = 0, node = 0; + int i, bus, num_buses; + + for(i = 0; i < rio_table_hdr->num_rio_dev; i++){ + if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id){ + twister = rio_devs[i]->owner_id; + break; + } + } + if (i == rio_table_hdr->num_rio_dev){ + printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __FUNCTION__); + return last_bus; + } + + for(i = 0; i < rio_table_hdr->num_scal_dev; i++){ + if (scal_devs[i]->node_id == twister){ + node = scal_devs[i]->node_id; + break; + } + } + if (i == rio_table_hdr->num_scal_dev){ + printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __FUNCTION__); + return last_bus; + } + + switch (rio_devs[wpeg_num]->type){ + case CompatWPEG: + /* The Compatability Winnipeg controls the 2 legacy buses, + * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case + * a PCI-PCI bridge card is used in either slot: total 5 buses. + */ + num_buses = 5; + break; + case AltWPEG: + /* The Alternate Winnipeg controls the 2 133MHz buses [1 slot + * each], their 2 "extra" buses, the 100MHz bus [2 slots] and + * the "extra" buses for each of those slots: total 7 buses. + */ + num_buses = 7; + break; + case LookOutAWPEG: + case LookOutBWPEG: + /* A Lookout Winnipeg controls 3 100MHz buses [2 slots each] + * & the "extra" buses for each of those slots: total 9 buses. + */ + num_buses = 9; + break; + default: + printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __FUNCTION__); + return last_bus; + } + + for(bus = last_bus; bus < last_bus + num_buses; bus++) + mp_bus_id_to_node[bus] = node; + return bus; +} + +static int __init build_detail_arrays(void) +{ + unsigned long ptr; + int i, scal_detail_size, rio_detail_size; + + if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){ + printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __FUNCTION__, MAX_NUMNODES, rio_table_hdr->num_scal_dev); + return 0; + } + + switch (rio_table_hdr->version){ + default: + printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __FUNCTION__, rio_table_hdr->version); + return 0; + case 2: + scal_detail_size = 11; + rio_detail_size = 13; + break; + case 3: + scal_detail_size = 12; + rio_detail_size = 15; + break; + } + + ptr = (unsigned long)rio_table_hdr + 3; + for(i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size) + scal_devs[i] = (struct scal_detail *)ptr; + + for(i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size) + rio_devs[i] = (struct rio_detail *)ptr; + + return 1; +} + +void __init setup_summit(void) +{ + unsigned long ptr; + unsigned short offset; + int i, next_wpeg, next_bus = 0; + + /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */ + ptr = *(unsigned short *)phys_to_virt(0x40Eul); + ptr = (unsigned long)phys_to_virt(ptr << 4); + + rio_table_hdr = NULL; + offset = 0x180; + while (offset){ + /* The block id is stored in the 2nd word */ + if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){ + /* set the pointer past the offset & block id */ + rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4); + break; + } + /* The next offset is stored in the 1st word. 0 means no more */ + offset = *((unsigned short *)(ptr + offset)); + } + if (!rio_table_hdr){ + printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __FUNCTION__); + return; + } + + if (!build_detail_arrays()) + return; + + /* The first Winnipeg we're looking for has an index of 0 */ + next_wpeg = 0; + do { + for(i = 0; i < rio_table_hdr->num_rio_dev; i++){ + if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg){ + /* It's the Winnipeg we're looking for! */ + next_bus = setup_pci_node_map_for_wpeg(i, next_bus); + next_wpeg++; + break; + } + } + /* + * If we go through all Rio devices and don't find one with + * the next index, it means we've found all the Winnipegs, + * and thus all the PCI buses. + */ + if (i == rio_table_hdr->num_rio_dev) + next_wpeg = 0; + } while (next_wpeg != 0); +} diff --git a/arch/x86/kernel/suspend_64.c b/arch/x86/kernel/suspend_64.c new file mode 100644 index 000000000000..573c0a6e0ac6 --- /dev/null +++ b/arch/x86/kernel/suspend_64.c @@ -0,0 +1,239 @@ +/* + * Suspend support specific for i386. + * + * Distribute under GPLv2 + * + * Copyright (c) 2002 Pavel Machek <pavel@suse.cz> + * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org> + */ + +#include <linux/smp.h> +#include <linux/suspend.h> +#include <asm/proto.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/mtrr.h> + +/* References to section boundaries */ +extern const void __nosave_begin, __nosave_end; + +struct saved_context saved_context; + +unsigned long saved_context_eax, saved_context_ebx, saved_context_ecx, saved_context_edx; +unsigned long saved_context_esp, saved_context_ebp, saved_context_esi, saved_context_edi; +unsigned long saved_context_r08, saved_context_r09, saved_context_r10, saved_context_r11; +unsigned long saved_context_r12, saved_context_r13, saved_context_r14, saved_context_r15; +unsigned long saved_context_eflags; + +void __save_processor_state(struct saved_context *ctxt) +{ + kernel_fpu_begin(); + + /* + * descriptor tables + */ + asm volatile ("sgdt %0" : "=m" (ctxt->gdt_limit)); + asm volatile ("sidt %0" : "=m" (ctxt->idt_limit)); + asm volatile ("str %0" : "=m" (ctxt->tr)); + + /* XMM0..XMM15 should be handled by kernel_fpu_begin(). */ + /* + * segment registers + */ + asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds)); + asm volatile ("movw %%es, %0" : "=m" (ctxt->es)); + asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs)); + asm volatile ("movw %%gs, %0" : "=m" (ctxt->gs)); + asm volatile ("movw %%ss, %0" : "=m" (ctxt->ss)); + + rdmsrl(MSR_FS_BASE, ctxt->fs_base); + rdmsrl(MSR_GS_BASE, ctxt->gs_base); + rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base); + mtrr_save_fixed_ranges(NULL); + + /* + * control registers + */ + rdmsrl(MSR_EFER, ctxt->efer); + ctxt->cr0 = read_cr0(); + ctxt->cr2 = read_cr2(); + ctxt->cr3 = read_cr3(); + ctxt->cr4 = read_cr4(); + ctxt->cr8 = read_cr8(); +} + +void save_processor_state(void) +{ + __save_processor_state(&saved_context); +} + +static void do_fpu_end(void) +{ + /* + * Restore FPU regs if necessary + */ + kernel_fpu_end(); +} + +void __restore_processor_state(struct saved_context *ctxt) +{ + /* + * control registers + */ + wrmsrl(MSR_EFER, ctxt->efer); + write_cr8(ctxt->cr8); + write_cr4(ctxt->cr4); + write_cr3(ctxt->cr3); + write_cr2(ctxt->cr2); + write_cr0(ctxt->cr0); + + /* + * now restore the descriptor tables to their proper values + * ltr is done i fix_processor_context(). + */ + asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit)); + asm volatile ("lidt %0" :: "m" (ctxt->idt_limit)); + + /* + * segment registers + */ + asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds)); + asm volatile ("movw %0, %%es" :: "r" (ctxt->es)); + asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs)); + load_gs_index(ctxt->gs); + asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss)); + + wrmsrl(MSR_FS_BASE, ctxt->fs_base); + wrmsrl(MSR_GS_BASE, ctxt->gs_base); + wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base); + + fix_processor_context(); + + do_fpu_end(); + mtrr_ap_init(); +} + +void restore_processor_state(void) +{ + __restore_processor_state(&saved_context); +} + +void fix_processor_context(void) +{ + int cpu = smp_processor_id(); + struct tss_struct *t = &per_cpu(init_tss, cpu); + + set_tss_desc(cpu,t); /* This just modifies memory; should not be neccessary. But... This is neccessary, because 386 hardware has concept of busy TSS or some similar stupidity. */ + + cpu_gdt(cpu)[GDT_ENTRY_TSS].type = 9; + + syscall_init(); /* This sets MSR_*STAR and related */ + load_TR_desc(); /* This does ltr */ + load_LDT(¤t->active_mm->context); /* This does lldt */ + + /* + * Now maybe reload the debug registers + */ + if (current->thread.debugreg7){ + loaddebug(¤t->thread, 0); + loaddebug(¤t->thread, 1); + loaddebug(¤t->thread, 2); + loaddebug(¤t->thread, 3); + /* no 4 and 5 */ + loaddebug(¤t->thread, 6); + loaddebug(¤t->thread, 7); + } + +} + +#ifdef CONFIG_HIBERNATION +/* Defined in arch/x86_64/kernel/suspend_asm.S */ +extern int restore_image(void); + +pgd_t *temp_level4_pgt; + +static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end) +{ + long i, j; + + i = pud_index(address); + pud = pud + i; + for (; i < PTRS_PER_PUD; pud++, i++) { + unsigned long paddr; + pmd_t *pmd; + + paddr = address + i*PUD_SIZE; + if (paddr >= end) + break; + + pmd = (pmd_t *)get_safe_page(GFP_ATOMIC); + if (!pmd) + return -ENOMEM; + set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE)); + for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) { + unsigned long pe; + + if (paddr >= end) + break; + pe = _PAGE_NX | _PAGE_PSE | _KERNPG_TABLE | paddr; + pe &= __supported_pte_mask; + set_pmd(pmd, __pmd(pe)); + } + } + return 0; +} + +static int set_up_temporary_mappings(void) +{ + unsigned long start, end, next; + int error; + + temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC); + if (!temp_level4_pgt) + return -ENOMEM; + + /* It is safe to reuse the original kernel mapping */ + set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map), + init_level4_pgt[pgd_index(__START_KERNEL_map)]); + + /* Set up the direct mapping from scratch */ + start = (unsigned long)pfn_to_kaddr(0); + end = (unsigned long)pfn_to_kaddr(end_pfn); + + for (; start < end; start = next) { + pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC); + if (!pud) + return -ENOMEM; + next = start + PGDIR_SIZE; + if (next > end) + next = end; + if ((error = res_phys_pud_init(pud, __pa(start), __pa(next)))) + return error; + set_pgd(temp_level4_pgt + pgd_index(start), + mk_kernel_pgd(__pa(pud))); + } + return 0; +} + +int swsusp_arch_resume(void) +{ + int error; + + /* We have got enough memory and from now on we cannot recover */ + if ((error = set_up_temporary_mappings())) + return error; + restore_image(); + return 0; +} + +/* + * pfn_is_nosave - check if given pfn is in the 'nosave' section + */ + +int pfn_is_nosave(unsigned long pfn) +{ + unsigned long nosave_begin_pfn = __pa_symbol(&__nosave_begin) >> PAGE_SHIFT; + unsigned long nosave_end_pfn = PAGE_ALIGN(__pa_symbol(&__nosave_end)) >> PAGE_SHIFT; + return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn); +} +#endif /* CONFIG_HIBERNATION */ diff --git a/arch/x86/kernel/suspend_asm_64.S b/arch/x86/kernel/suspend_asm_64.S new file mode 100644 index 000000000000..16d183f67bc1 --- /dev/null +++ b/arch/x86/kernel/suspend_asm_64.S @@ -0,0 +1,110 @@ +/* Copyright 2004,2005 Pavel Machek <pavel@suse.cz>, Andi Kleen <ak@suse.de>, Rafael J. Wysocki <rjw@sisk.pl> + * + * Distribute under GPLv2. + * + * swsusp_arch_resume may not use any stack, nor any variable that is + * not "NoSave" during copying pages: + * + * Its rewriting one kernel image with another. What is stack in "old" + * image could very well be data page in "new" image, and overwriting + * your own stack under you is bad idea. + */ + + .text +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/asm-offsets.h> + +ENTRY(swsusp_arch_suspend) + + movq %rsp, saved_context_esp(%rip) + movq %rax, saved_context_eax(%rip) + movq %rbx, saved_context_ebx(%rip) + movq %rcx, saved_context_ecx(%rip) + movq %rdx, saved_context_edx(%rip) + movq %rbp, saved_context_ebp(%rip) + movq %rsi, saved_context_esi(%rip) + movq %rdi, saved_context_edi(%rip) + movq %r8, saved_context_r08(%rip) + movq %r9, saved_context_r09(%rip) + movq %r10, saved_context_r10(%rip) + movq %r11, saved_context_r11(%rip) + movq %r12, saved_context_r12(%rip) + movq %r13, saved_context_r13(%rip) + movq %r14, saved_context_r14(%rip) + movq %r15, saved_context_r15(%rip) + pushfq ; popq saved_context_eflags(%rip) + + call swsusp_save + ret + +ENTRY(restore_image) + /* switch to temporary page tables */ + movq $__PAGE_OFFSET, %rdx + movq temp_level4_pgt(%rip), %rax + subq %rdx, %rax + movq %rax, %cr3 + /* Flush TLB */ + movq mmu_cr4_features(%rip), %rax + movq %rax, %rdx + andq $~(1<<7), %rdx # PGE + movq %rdx, %cr4; # turn off PGE + movq %cr3, %rcx; # flush TLB + movq %rcx, %cr3; + movq %rax, %cr4; # turn PGE back on + + movq restore_pblist(%rip), %rdx +loop: + testq %rdx, %rdx + jz done + + /* get addresses from the pbe and copy the page */ + movq pbe_address(%rdx), %rsi + movq pbe_orig_address(%rdx), %rdi + movq $512, %rcx + rep + movsq + + /* progress to the next pbe */ + movq pbe_next(%rdx), %rdx + jmp loop +done: + /* go back to the original page tables */ + movq $(init_level4_pgt - __START_KERNEL_map), %rax + addq phys_base(%rip), %rax + movq %rax, %cr3 + + /* Flush TLB, including "global" things (vmalloc) */ + movq mmu_cr4_features(%rip), %rax + movq %rax, %rdx + andq $~(1<<7), %rdx; # PGE + movq %rdx, %cr4; # turn off PGE + movq %cr3, %rcx; # flush TLB + movq %rcx, %cr3 + movq %rax, %cr4; # turn PGE back on + + movl $24, %eax + movl %eax, %ds + + movq saved_context_esp(%rip), %rsp + movq saved_context_ebp(%rip), %rbp + /* Don't restore %rax, it must be 0 anyway */ + movq saved_context_ebx(%rip), %rbx + movq saved_context_ecx(%rip), %rcx + movq saved_context_edx(%rip), %rdx + movq saved_context_esi(%rip), %rsi + movq saved_context_edi(%rip), %rdi + movq saved_context_r08(%rip), %r8 + movq saved_context_r09(%rip), %r9 + movq saved_context_r10(%rip), %r10 + movq saved_context_r11(%rip), %r11 + movq saved_context_r12(%rip), %r12 + movq saved_context_r13(%rip), %r13 + movq saved_context_r14(%rip), %r14 + movq saved_context_r15(%rip), %r15 + pushq saved_context_eflags(%rip) ; popfq + + xorq %rax, %rax + + ret diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c new file mode 100644 index 000000000000..42147304de88 --- /dev/null +++ b/arch/x86/kernel/sys_i386_32.c @@ -0,0 +1,265 @@ +/* + * linux/arch/i386/kernel/sys_i386.c + * + * This file contains various random system calls that + * have a non-standard calling sequence on the Linux/i386 + * platform. + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/smp.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/stat.h> +#include <linux/syscalls.h> +#include <linux/mman.h> +#include <linux/file.h> +#include <linux/utsname.h> + +#include <asm/uaccess.h> +#include <asm/unistd.h> +#include <asm/ipc.h> + +/* + * sys_pipe() is the normal C calling standard for creating + * a pipe. It's not the way Unix traditionally does this, though. + */ +asmlinkage int sys_pipe(unsigned long __user * fildes) +{ + int fd[2]; + int error; + + error = do_pipe(fd); + if (!error) { + if (copy_to_user(fildes, fd, 2*sizeof(int))) + error = -EFAULT; + } + return error; +} + +asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + int error = -EBADF; + struct file *file = NULL; + struct mm_struct *mm = current->mm; + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } + + down_write(&mm->mmap_sem); + error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(&mm->mmap_sem); + + if (file) + fput(file); +out: + return error; +} + +/* + * Perform the select(nd, in, out, ex, tv) and mmap() system + * calls. Linux/i386 didn't use to be able to handle more than + * 4 system call parameters, so these system calls used a memory + * block for parameter passing.. + */ + +struct mmap_arg_struct { + unsigned long addr; + unsigned long len; + unsigned long prot; + unsigned long flags; + unsigned long fd; + unsigned long offset; +}; + +asmlinkage int old_mmap(struct mmap_arg_struct __user *arg) +{ + struct mmap_arg_struct a; + int err = -EFAULT; + + if (copy_from_user(&a, arg, sizeof(a))) + goto out; + + err = -EINVAL; + if (a.offset & ~PAGE_MASK) + goto out; + + err = sys_mmap2(a.addr, a.len, a.prot, a.flags, + a.fd, a.offset >> PAGE_SHIFT); +out: + return err; +} + + +struct sel_arg_struct { + unsigned long n; + fd_set __user *inp, *outp, *exp; + struct timeval __user *tvp; +}; + +asmlinkage int old_select(struct sel_arg_struct __user *arg) +{ + struct sel_arg_struct a; + + if (copy_from_user(&a, arg, sizeof(a))) + return -EFAULT; + /* sys_select() does the appropriate kernel locking */ + return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp); +} + +/* + * sys_ipc() is the de-multiplexer for the SysV IPC calls.. + * + * This is really horribly ugly. + */ +asmlinkage int sys_ipc (uint call, int first, int second, + int third, void __user *ptr, long fifth) +{ + int version, ret; + + version = call >> 16; /* hack for backward compatibility */ + call &= 0xffff; + + switch (call) { + case SEMOP: + return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL); + case SEMTIMEDOP: + return sys_semtimedop(first, (struct sembuf __user *)ptr, second, + (const struct timespec __user *)fifth); + + case SEMGET: + return sys_semget (first, second, third); + case SEMCTL: { + union semun fourth; + if (!ptr) + return -EINVAL; + if (get_user(fourth.__pad, (void __user * __user *) ptr)) + return -EFAULT; + return sys_semctl (first, second, third, fourth); + } + + case MSGSND: + return sys_msgsnd (first, (struct msgbuf __user *) ptr, + second, third); + case MSGRCV: + switch (version) { + case 0: { + struct ipc_kludge tmp; + if (!ptr) + return -EINVAL; + + if (copy_from_user(&tmp, + (struct ipc_kludge __user *) ptr, + sizeof (tmp))) + return -EFAULT; + return sys_msgrcv (first, tmp.msgp, second, + tmp.msgtyp, third); + } + default: + return sys_msgrcv (first, + (struct msgbuf __user *) ptr, + second, fifth, third); + } + case MSGGET: + return sys_msgget ((key_t) first, second); + case MSGCTL: + return sys_msgctl (first, second, (struct msqid_ds __user *) ptr); + + case SHMAT: + switch (version) { + default: { + ulong raddr; + ret = do_shmat (first, (char __user *) ptr, second, &raddr); + if (ret) + return ret; + return put_user (raddr, (ulong __user *) third); + } + case 1: /* iBCS2 emulator entry point */ + if (!segment_eq(get_fs(), get_ds())) + return -EINVAL; + /* The "(ulong *) third" is valid _only_ because of the kernel segment thing */ + return do_shmat (first, (char __user *) ptr, second, (ulong *) third); + } + case SHMDT: + return sys_shmdt ((char __user *)ptr); + case SHMGET: + return sys_shmget (first, second, third); + case SHMCTL: + return sys_shmctl (first, second, + (struct shmid_ds __user *) ptr); + default: + return -ENOSYS; + } +} + +/* + * Old cruft + */ +asmlinkage int sys_uname(struct old_utsname __user * name) +{ + int err; + if (!name) + return -EFAULT; + down_read(&uts_sem); + err = copy_to_user(name, utsname(), sizeof (*name)); + up_read(&uts_sem); + return err?-EFAULT:0; +} + +asmlinkage int sys_olduname(struct oldold_utsname __user * name) +{ + int error; + + if (!name) + return -EFAULT; + if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname))) + return -EFAULT; + + down_read(&uts_sem); + + error = __copy_to_user(&name->sysname, &utsname()->sysname, + __OLD_UTS_LEN); + error |= __put_user(0, name->sysname + __OLD_UTS_LEN); + error |= __copy_to_user(&name->nodename, &utsname()->nodename, + __OLD_UTS_LEN); + error |= __put_user(0, name->nodename + __OLD_UTS_LEN); + error |= __copy_to_user(&name->release, &utsname()->release, + __OLD_UTS_LEN); + error |= __put_user(0, name->release + __OLD_UTS_LEN); + error |= __copy_to_user(&name->version, &utsname()->version, + __OLD_UTS_LEN); + error |= __put_user(0, name->version + __OLD_UTS_LEN); + error |= __copy_to_user(&name->machine, &utsname()->machine, + __OLD_UTS_LEN); + error |= __put_user(0, name->machine + __OLD_UTS_LEN); + + up_read(&uts_sem); + + error = error ? -EFAULT : 0; + + return error; +} + + +/* + * Do a system call from kernel instead of calling sys_execve so we + * end up with proper pt_regs. + */ +int kernel_execve(const char *filename, char *const argv[], char *const envp[]) +{ + long __res; + asm volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx" + : "=a" (__res) + : "0" (__NR_execve),"ri" (filename),"c" (argv), "d" (envp) : "memory"); + return __res; +} diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c new file mode 100644 index 000000000000..4770b7a2052c --- /dev/null +++ b/arch/x86/kernel/sys_x86_64.c @@ -0,0 +1,159 @@ +/* + * linux/arch/x86_64/kernel/sys_x86_64.c + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/syscalls.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/smp.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/stat.h> +#include <linux/mman.h> +#include <linux/file.h> +#include <linux/utsname.h> +#include <linux/personality.h> + +#include <asm/uaccess.h> +#include <asm/ia32.h> + +/* + * sys_pipe() is the normal C calling standard for creating + * a pipe. It's not the way Unix traditionally does this, though. + */ +asmlinkage long sys_pipe(int __user *fildes) +{ + int fd[2]; + int error; + + error = do_pipe(fd); + if (!error) { + if (copy_to_user(fildes, fd, 2*sizeof(int))) + error = -EFAULT; + } + return error; +} + +asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long off) +{ + long error; + struct file * file; + + error = -EINVAL; + if (off & ~PAGE_MASK) + goto out; + + error = -EBADF; + file = NULL; + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } + down_write(¤t->mm->mmap_sem); + error = do_mmap_pgoff(file, addr, len, prot, flags, off >> PAGE_SHIFT); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); +out: + return error; +} + +static void find_start_end(unsigned long flags, unsigned long *begin, + unsigned long *end) +{ + if (!test_thread_flag(TIF_IA32) && (flags & MAP_32BIT)) { + /* This is usually used needed to map code in small + model, so it needs to be in the first 31bit. Limit + it to that. This means we need to move the + unmapped base down for this case. This can give + conflicts with the heap, but we assume that glibc + malloc knows how to fall back to mmap. Give it 1GB + of playground for now. -AK */ + *begin = 0x40000000; + *end = 0x80000000; + } else { + *begin = TASK_UNMAPPED_BASE; + *end = TASK_SIZE; + } +} + +unsigned long +arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + unsigned long start_addr; + unsigned long begin, end; + + if (flags & MAP_FIXED) + return addr; + + find_start_end(flags, &begin, &end); + + if (len > end) + return -ENOMEM; + + if (addr) { + addr = PAGE_ALIGN(addr); + vma = find_vma(mm, addr); + if (end - len >= addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + if (((flags & MAP_32BIT) || test_thread_flag(TIF_IA32)) + && len <= mm->cached_hole_size) { + mm->cached_hole_size = 0; + mm->free_area_cache = begin; + } + addr = mm->free_area_cache; + if (addr < begin) + addr = begin; + start_addr = addr; + +full_search: + for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { + /* At this point: (!vma || addr < vma->vm_end). */ + if (end - len < addr) { + /* + * Start a new search - just in case we missed + * some holes. + */ + if (start_addr != begin) { + start_addr = addr = begin; + mm->cached_hole_size = 0; + goto full_search; + } + return -ENOMEM; + } + if (!vma || addr + len <= vma->vm_start) { + /* + * Remember the place where we stopped the search: + */ + mm->free_area_cache = addr + len; + return addr; + } + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; + + addr = vma->vm_end; + } +} + +asmlinkage long sys_uname(struct new_utsname __user * name) +{ + int err; + down_read(&uts_sem); + err = copy_to_user(name, utsname(), sizeof (*name)); + up_read(&uts_sem); + if (personality(current->personality) == PER_LINUX32) + err |= copy_to_user(&name->machine, "i686", 5); + return err ? -EFAULT : 0; +} diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c new file mode 100644 index 000000000000..9d498c2f8eea --- /dev/null +++ b/arch/x86/kernel/syscall_64.c @@ -0,0 +1,26 @@ +/* System call table for x86-64. */ + +#include <linux/linkage.h> +#include <linux/sys.h> +#include <linux/cache.h> +#include <asm/asm-offsets.h> + +#define __NO_STUBS + +#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ; +#undef _ASM_X86_64_UNISTD_H_ +#include <asm/unistd_64.h> + +#undef __SYSCALL +#define __SYSCALL(nr, sym) [ nr ] = sym, +#undef _ASM_X86_64_UNISTD_H_ + +typedef void (*sys_call_ptr_t)(void); + +extern void sys_ni_syscall(void); + +const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = { + /* Smells like a like a compiler bug -- it doesn't work when the & below is removed. */ + [0 ... __NR_syscall_max] = &sys_ni_syscall, +#include <asm/unistd_64.h> +}; diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S new file mode 100644 index 000000000000..8344c70adf61 --- /dev/null +++ b/arch/x86/kernel/syscall_table_32.S @@ -0,0 +1,326 @@ +ENTRY(sys_call_table) + .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */ + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_lchown16 + .long sys_ni_syscall /* old break syscall holder */ + .long sys_stat + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid16 + .long sys_getuid16 + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_fstat + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 - old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid16 + .long sys_getgid16 + .long sys_signal + .long sys_geteuid16 + .long sys_getegid16 /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys() */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_olduname + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid16 /* 70 */ + .long sys_setregid16 + .long sys_sigsuspend + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_old_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups16 /* 80 */ + .long sys_setgroups16 + .long old_select + .long sys_symlink + .long sys_lstat + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long old_readdir + .long old_mmap /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown16 /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ioperm + .long sys_socketcall + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_uname + .long sys_iopl /* 110 */ + .long sys_vhangup + .long sys_ni_syscall /* old "idle" system call */ + .long sys_vm86old + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc + .long sys_fsync + .long sys_sigreturn + .long sys_clone /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_modify_ldt + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* reserved for afs_syscall */ + .long sys_setfsuid16 + .long sys_setfsgid16 + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_setresuid16 + .long sys_getresuid16 /* 165 */ + .long sys_vm86 + .long sys_ni_syscall /* Old sys_query_module */ + .long sys_poll + .long sys_nfsservctl + .long sys_setresgid16 /* 170 */ + .long sys_getresgid16 + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread64 /* 180 */ + .long sys_pwrite64 + .long sys_chown16 + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* reserved for streams1 */ + .long sys_ni_syscall /* reserved for streams2 */ + .long sys_vfork /* 190 */ + .long sys_getrlimit + .long sys_mmap2 + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + .long sys_getdents64 /* 220 */ + .long sys_fcntl64 + .long sys_ni_syscall /* reserved for TUX */ + .long sys_ni_syscall + .long sys_gettid + .long sys_readahead /* 225 */ + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr /* 230 */ + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr /* 235 */ + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_tkill + .long sys_sendfile64 + .long sys_futex /* 240 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_set_thread_area + .long sys_get_thread_area + .long sys_io_setup /* 245 */ + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 /* 250 */ + .long sys_ni_syscall + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl /* 255 */ + .long sys_epoll_wait + .long sys_remap_file_pages + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ + .long sys_utimes + .long sys_fadvise64_64 + .long sys_ni_syscall /* sys_vserver */ + .long sys_mbind + .long sys_get_mempolicy + .long sys_set_mempolicy + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive /* 280 */ + .long sys_mq_notify + .long sys_mq_getsetattr + .long sys_kexec_load + .long sys_waitid + .long sys_ni_syscall /* 285 */ /* available */ + .long sys_add_key + .long sys_request_key + .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get /* 290 */ + .long sys_inotify_init + .long sys_inotify_add_watch + .long sys_inotify_rm_watch + .long sys_migrate_pages + .long sys_openat /* 295 */ + .long sys_mkdirat + .long sys_mknodat + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 /* 300 */ + .long sys_unlinkat + .long sys_renameat + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat /* 305 */ + .long sys_fchmodat + .long sys_faccessat + .long sys_pselect6 + .long sys_ppoll + .long sys_unshare /* 310 */ + .long sys_set_robust_list + .long sys_get_robust_list + .long sys_splice + .long sys_sync_file_range + .long sys_tee /* 315 */ + .long sys_vmsplice + .long sys_move_pages + .long sys_getcpu + .long sys_epoll_pwait + .long sys_utimensat /* 320 */ + .long sys_signalfd + .long sys_timerfd + .long sys_eventfd + .long sys_fallocate diff --git a/arch/x86/kernel/sysenter_32.c b/arch/x86/kernel/sysenter_32.c new file mode 100644 index 000000000000..4eb2e408764f --- /dev/null +++ b/arch/x86/kernel/sysenter_32.c @@ -0,0 +1,348 @@ +/* + * linux/arch/i386/kernel/sysenter.c + * + * (C) Copyright 2002 Linus Torvalds + * Portions based on the vdso-randomization code from exec-shield: + * Copyright(C) 2005-2006, Red Hat, Inc., Ingo Molnar + * + * This file contains the needed initializations to support sysenter. + */ + +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/thread_info.h> +#include <linux/sched.h> +#include <linux/gfp.h> +#include <linux/string.h> +#include <linux/elf.h> +#include <linux/mm.h> +#include <linux/err.h> +#include <linux/module.h> + +#include <asm/cpufeature.h> +#include <asm/msr.h> +#include <asm/pgtable.h> +#include <asm/unistd.h> +#include <asm/elf.h> +#include <asm/tlbflush.h> + +enum { + VDSO_DISABLED = 0, + VDSO_ENABLED = 1, + VDSO_COMPAT = 2, +}; + +#ifdef CONFIG_COMPAT_VDSO +#define VDSO_DEFAULT VDSO_COMPAT +#else +#define VDSO_DEFAULT VDSO_ENABLED +#endif + +/* + * Should the kernel map a VDSO page into processes and pass its + * address down to glibc upon exec()? + */ +unsigned int __read_mostly vdso_enabled = VDSO_DEFAULT; + +EXPORT_SYMBOL_GPL(vdso_enabled); + +static int __init vdso_setup(char *s) +{ + vdso_enabled = simple_strtoul(s, NULL, 0); + + return 1; +} + +__setup("vdso=", vdso_setup); + +extern asmlinkage void sysenter_entry(void); + +static __init void reloc_symtab(Elf32_Ehdr *ehdr, + unsigned offset, unsigned size) +{ + Elf32_Sym *sym = (void *)ehdr + offset; + unsigned nsym = size / sizeof(*sym); + unsigned i; + + for(i = 0; i < nsym; i++, sym++) { + if (sym->st_shndx == SHN_UNDEF || + sym->st_shndx == SHN_ABS) + continue; /* skip */ + + if (sym->st_shndx > SHN_LORESERVE) { + printk(KERN_INFO "VDSO: unexpected st_shndx %x\n", + sym->st_shndx); + continue; + } + + switch(ELF_ST_TYPE(sym->st_info)) { + case STT_OBJECT: + case STT_FUNC: + case STT_SECTION: + case STT_FILE: + sym->st_value += VDSO_HIGH_BASE; + } + } +} + +static __init void reloc_dyn(Elf32_Ehdr *ehdr, unsigned offset) +{ + Elf32_Dyn *dyn = (void *)ehdr + offset; + + for(; dyn->d_tag != DT_NULL; dyn++) + switch(dyn->d_tag) { + case DT_PLTGOT: + case DT_HASH: + case DT_STRTAB: + case DT_SYMTAB: + case DT_RELA: + case DT_INIT: + case DT_FINI: + case DT_REL: + case DT_DEBUG: + case DT_JMPREL: + case DT_VERSYM: + case DT_VERDEF: + case DT_VERNEED: + case DT_ADDRRNGLO ... DT_ADDRRNGHI: + /* definitely pointers needing relocation */ + dyn->d_un.d_ptr += VDSO_HIGH_BASE; + break; + + case DT_ENCODING ... OLD_DT_LOOS-1: + case DT_LOOS ... DT_HIOS-1: + /* Tags above DT_ENCODING are pointers if + they're even */ + if (dyn->d_tag >= DT_ENCODING && + (dyn->d_tag & 1) == 0) + dyn->d_un.d_ptr += VDSO_HIGH_BASE; + break; + + case DT_VERDEFNUM: + case DT_VERNEEDNUM: + case DT_FLAGS_1: + case DT_RELACOUNT: + case DT_RELCOUNT: + case DT_VALRNGLO ... DT_VALRNGHI: + /* definitely not pointers */ + break; + + case OLD_DT_LOOS ... DT_LOOS-1: + case DT_HIOS ... DT_VALRNGLO-1: + default: + if (dyn->d_tag > DT_ENCODING) + printk(KERN_INFO "VDSO: unexpected DT_tag %x\n", + dyn->d_tag); + break; + } +} + +static __init void relocate_vdso(Elf32_Ehdr *ehdr) +{ + Elf32_Phdr *phdr; + Elf32_Shdr *shdr; + int i; + + BUG_ON(memcmp(ehdr->e_ident, ELFMAG, 4) != 0 || + !elf_check_arch(ehdr) || + ehdr->e_type != ET_DYN); + + ehdr->e_entry += VDSO_HIGH_BASE; + + /* rebase phdrs */ + phdr = (void *)ehdr + ehdr->e_phoff; + for (i = 0; i < ehdr->e_phnum; i++) { + phdr[i].p_vaddr += VDSO_HIGH_BASE; + + /* relocate dynamic stuff */ + if (phdr[i].p_type == PT_DYNAMIC) + reloc_dyn(ehdr, phdr[i].p_offset); + } + + /* rebase sections */ + shdr = (void *)ehdr + ehdr->e_shoff; + for(i = 0; i < ehdr->e_shnum; i++) { + if (!(shdr[i].sh_flags & SHF_ALLOC)) + continue; + + shdr[i].sh_addr += VDSO_HIGH_BASE; + + if (shdr[i].sh_type == SHT_SYMTAB || + shdr[i].sh_type == SHT_DYNSYM) + reloc_symtab(ehdr, shdr[i].sh_offset, + shdr[i].sh_size); + } +} + +void enable_sep_cpu(void) +{ + int cpu = get_cpu(); + struct tss_struct *tss = &per_cpu(init_tss, cpu); + + if (!boot_cpu_has(X86_FEATURE_SEP)) { + put_cpu(); + return; + } + + tss->x86_tss.ss1 = __KERNEL_CS; + tss->x86_tss.esp1 = sizeof(struct tss_struct) + (unsigned long) tss; + wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); + wrmsr(MSR_IA32_SYSENTER_ESP, tss->x86_tss.esp1, 0); + wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long) sysenter_entry, 0); + put_cpu(); +} + +static struct vm_area_struct gate_vma; + +static int __init gate_vma_init(void) +{ + gate_vma.vm_mm = NULL; + gate_vma.vm_start = FIXADDR_USER_START; + gate_vma.vm_end = FIXADDR_USER_END; + gate_vma.vm_flags = VM_READ | VM_MAYREAD | VM_EXEC | VM_MAYEXEC; + gate_vma.vm_page_prot = __P101; + /* + * Make sure the vDSO gets into every core dump. + * Dumping its contents makes post-mortem fully interpretable later + * without matching up the same kernel and hardware config to see + * what PC values meant. + */ + gate_vma.vm_flags |= VM_ALWAYSDUMP; + return 0; +} + +/* + * These symbols are defined by vsyscall.o to mark the bounds + * of the ELF DSO images included therein. + */ +extern const char vsyscall_int80_start, vsyscall_int80_end; +extern const char vsyscall_sysenter_start, vsyscall_sysenter_end; +static struct page *syscall_pages[1]; + +static void map_compat_vdso(int map) +{ + static int vdso_mapped; + + if (map == vdso_mapped) + return; + + vdso_mapped = map; + + __set_fixmap(FIX_VDSO, page_to_pfn(syscall_pages[0]) << PAGE_SHIFT, + map ? PAGE_READONLY_EXEC : PAGE_NONE); + + /* flush stray tlbs */ + flush_tlb_all(); +} + +int __init sysenter_setup(void) +{ + void *syscall_page = (void *)get_zeroed_page(GFP_ATOMIC); + const void *vsyscall; + size_t vsyscall_len; + + syscall_pages[0] = virt_to_page(syscall_page); + + gate_vma_init(); + + printk("Compat vDSO mapped to %08lx.\n", __fix_to_virt(FIX_VDSO)); + + if (!boot_cpu_has(X86_FEATURE_SEP)) { + vsyscall = &vsyscall_int80_start; + vsyscall_len = &vsyscall_int80_end - &vsyscall_int80_start; + } else { + vsyscall = &vsyscall_sysenter_start; + vsyscall_len = &vsyscall_sysenter_end - &vsyscall_sysenter_start; + } + + memcpy(syscall_page, vsyscall, vsyscall_len); + relocate_vdso(syscall_page); + + return 0; +} + +/* Defined in vsyscall-sysenter.S */ +extern void SYSENTER_RETURN; + +/* Setup a VMA at program startup for the vsyscall page */ +int arch_setup_additional_pages(struct linux_binprm *bprm, int exstack) +{ + struct mm_struct *mm = current->mm; + unsigned long addr; + int ret = 0; + bool compat; + + down_write(&mm->mmap_sem); + + /* Test compat mode once here, in case someone + changes it via sysctl */ + compat = (vdso_enabled == VDSO_COMPAT); + + map_compat_vdso(compat); + + if (compat) + addr = VDSO_HIGH_BASE; + else { + addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0); + if (IS_ERR_VALUE(addr)) { + ret = addr; + goto up_fail; + } + + /* + * MAYWRITE to allow gdb to COW and set breakpoints + * + * Make sure the vDSO gets into every core dump. + * Dumping its contents makes post-mortem fully + * interpretable later without matching up the same + * kernel and hardware config to see what PC values + * meant. + */ + ret = install_special_mapping(mm, addr, PAGE_SIZE, + VM_READ|VM_EXEC| + VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC| + VM_ALWAYSDUMP, + syscall_pages); + + if (ret) + goto up_fail; + } + + current->mm->context.vdso = (void *)addr; + current_thread_info()->sysenter_return = + (void *)VDSO_SYM(&SYSENTER_RETURN); + + up_fail: + up_write(&mm->mmap_sem); + + return ret; +} + +const char *arch_vma_name(struct vm_area_struct *vma) +{ + if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso) + return "[vdso]"; + return NULL; +} + +struct vm_area_struct *get_gate_vma(struct task_struct *tsk) +{ + struct mm_struct *mm = tsk->mm; + + /* Check to see if this task was created in compat vdso mode */ + if (mm && mm->context.vdso == (void *)VDSO_HIGH_BASE) + return &gate_vma; + return NULL; +} + +int in_gate_area(struct task_struct *task, unsigned long addr) +{ + const struct vm_area_struct *vma = get_gate_vma(task); + + return vma && addr >= vma->vm_start && addr < vma->vm_end; +} + +int in_gate_area_no_task(unsigned long addr) +{ + return 0; +} diff --git a/arch/x86/kernel/tce_64.c b/arch/x86/kernel/tce_64.c new file mode 100644 index 000000000000..e3f2569b2c44 --- /dev/null +++ b/arch/x86/kernel/tce_64.c @@ -0,0 +1,189 @@ +/* + * This file manages the translation entries for the IBM Calgary IOMMU. + * + * Derived from arch/powerpc/platforms/pseries/iommu.c + * + * Copyright (C) IBM Corporation, 2006 + * + * Author: Jon Mason <jdmason@us.ibm.com> + * Author: Muli Ben-Yehuda <muli@il.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/bootmem.h> +#include <asm/tce.h> +#include <asm/calgary.h> +#include <asm/proto.h> + +/* flush a tce at 'tceaddr' to main memory */ +static inline void flush_tce(void* tceaddr) +{ + /* a single tce can't cross a cache line */ + if (cpu_has_clflush) + asm volatile("clflush (%0)" :: "r" (tceaddr)); + else + asm volatile("wbinvd":::"memory"); +} + +void tce_build(struct iommu_table *tbl, unsigned long index, + unsigned int npages, unsigned long uaddr, int direction) +{ + u64* tp; + u64 t; + u64 rpn; + + t = (1 << TCE_READ_SHIFT); + if (direction != DMA_TO_DEVICE) + t |= (1 << TCE_WRITE_SHIFT); + + tp = ((u64*)tbl->it_base) + index; + + while (npages--) { + rpn = (virt_to_bus((void*)uaddr)) >> PAGE_SHIFT; + t &= ~TCE_RPN_MASK; + t |= (rpn << TCE_RPN_SHIFT); + + *tp = cpu_to_be64(t); + flush_tce(tp); + + uaddr += PAGE_SIZE; + tp++; + } +} + +void tce_free(struct iommu_table *tbl, long index, unsigned int npages) +{ + u64* tp; + + tp = ((u64*)tbl->it_base) + index; + + while (npages--) { + *tp = cpu_to_be64(0); + flush_tce(tp); + tp++; + } +} + +static inline unsigned int table_size_to_number_of_entries(unsigned char size) +{ + /* + * size is the order of the table, 0-7 + * smallest table is 8K entries, so shift result by 13 to + * multiply by 8K + */ + return (1 << size) << 13; +} + +static int tce_table_setparms(struct pci_dev *dev, struct iommu_table *tbl) +{ + unsigned int bitmapsz; + unsigned long bmppages; + int ret; + + tbl->it_busno = dev->bus->number; + + /* set the tce table size - measured in entries */ + tbl->it_size = table_size_to_number_of_entries(specified_table_size); + + /* + * number of bytes needed for the bitmap size in number of + * entries; we need one bit per entry + */ + bitmapsz = tbl->it_size / BITS_PER_BYTE; + bmppages = __get_free_pages(GFP_KERNEL, get_order(bitmapsz)); + if (!bmppages) { + printk(KERN_ERR "Calgary: cannot allocate bitmap\n"); + ret = -ENOMEM; + goto done; + } + + tbl->it_map = (unsigned long*)bmppages; + + memset(tbl->it_map, 0, bitmapsz); + + tbl->it_hint = 0; + + spin_lock_init(&tbl->it_lock); + + return 0; + +done: + return ret; +} + +int __init build_tce_table(struct pci_dev *dev, void __iomem *bbar) +{ + struct iommu_table *tbl; + int ret; + + if (pci_iommu(dev->bus)) { + printk(KERN_ERR "Calgary: dev %p has sysdata->iommu %p\n", + dev, pci_iommu(dev->bus)); + BUG(); + } + + tbl = kzalloc(sizeof(struct iommu_table), GFP_KERNEL); + if (!tbl) { + printk(KERN_ERR "Calgary: error allocating iommu_table\n"); + ret = -ENOMEM; + goto done; + } + + ret = tce_table_setparms(dev, tbl); + if (ret) + goto free_tbl; + + tbl->bbar = bbar; + + set_pci_iommu(dev->bus, tbl); + + return 0; + +free_tbl: + kfree(tbl); +done: + return ret; +} + +void * __init alloc_tce_table(void) +{ + unsigned int size; + + size = table_size_to_number_of_entries(specified_table_size); + size *= TCE_ENTRY_SIZE; + + return __alloc_bootmem_low(size, size, 0); +} + +void __init free_tce_table(void *tbl) +{ + unsigned int size; + + if (!tbl) + return; + + size = table_size_to_number_of_entries(specified_table_size); + size *= TCE_ENTRY_SIZE; + + free_bootmem(__pa(tbl), size); +} diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c new file mode 100644 index 000000000000..19a6c678d02e --- /dev/null +++ b/arch/x86/kernel/time_32.c @@ -0,0 +1,236 @@ +/* + * linux/arch/i386/kernel/time.c + * + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * + * This file contains the PC-specific time handling details: + * reading the RTC at bootup, etc.. + * 1994-07-02 Alan Modra + * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime + * 1995-03-26 Markus Kuhn + * fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887 + * precision CMOS clock update + * 1996-05-03 Ingo Molnar + * fixed time warps in do_[slow|fast]_gettimeoffset() + * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 + * "A Kernel Model for Precision Timekeeping" by Dave Mills + * 1998-09-05 (Various) + * More robust do_fast_gettimeoffset() algorithm implemented + * (works with APM, Cyrix 6x86MX and Centaur C6), + * monotonic gettimeofday() with fast_get_timeoffset(), + * drift-proof precision TSC calibration on boot + * (C. Scott Ananian <cananian@alumni.princeton.edu>, Andrew D. + * Balsa <andrebalsa@altern.org>, Philip Gladstone <philip@raptor.com>; + * ported from 2.0.35 Jumbo-9 by Michael Krause <m.krause@tu-harburg.de>). + * 1998-12-16 Andrea Arcangeli + * Fixed Jumbo-9 code in 2.1.131: do_gettimeofday was missing 1 jiffy + * because was not accounting lost_ticks. + * 1998-12-24 Copyright (C) 1998 Andrea Arcangeli + * Fixed a xtime SMP race (we need the xtime_lock rw spinlock to + * serialize accesses to xtime/lost_ticks). + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/module.h> +#include <linux/sysdev.h> +#include <linux/bcd.h> +#include <linux/efi.h> +#include <linux/mca.h> + +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/irq.h> +#include <asm/msr.h> +#include <asm/delay.h> +#include <asm/mpspec.h> +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/timer.h> +#include <asm/time.h> + +#include "mach_time.h" + +#include <linux/timex.h> + +#include <asm/hpet.h> + +#include <asm/arch_hooks.h> + +#include "io_ports.h" + +#include <asm/i8259.h> + +#include "do_timer.h" + +unsigned int cpu_khz; /* Detected as we calibrate the TSC */ +EXPORT_SYMBOL(cpu_khz); + +DEFINE_SPINLOCK(rtc_lock); +EXPORT_SYMBOL(rtc_lock); + +/* + * This is a special lock that is owned by the CPU and holds the index + * register we are working with. It is required for NMI access to the + * CMOS/RTC registers. See include/asm-i386/mc146818rtc.h for details. + */ +volatile unsigned long cmos_lock = 0; +EXPORT_SYMBOL(cmos_lock); + +/* Routines for accessing the CMOS RAM/RTC. */ +unsigned char rtc_cmos_read(unsigned char addr) +{ + unsigned char val; + lock_cmos_prefix(addr); + outb_p(addr, RTC_PORT(0)); + val = inb_p(RTC_PORT(1)); + lock_cmos_suffix(addr); + return val; +} +EXPORT_SYMBOL(rtc_cmos_read); + +void rtc_cmos_write(unsigned char val, unsigned char addr) +{ + lock_cmos_prefix(addr); + outb_p(addr, RTC_PORT(0)); + outb_p(val, RTC_PORT(1)); + lock_cmos_suffix(addr); +} +EXPORT_SYMBOL(rtc_cmos_write); + +static int set_rtc_mmss(unsigned long nowtime) +{ + int retval; + unsigned long flags; + + /* gets recalled with irq locally disabled */ + /* XXX - does irqsave resolve this? -johnstul */ + spin_lock_irqsave(&rtc_lock, flags); + retval = set_wallclock(nowtime); + spin_unlock_irqrestore(&rtc_lock, flags); + + return retval; +} + + +int timer_ack; + +unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + +#ifdef CONFIG_SMP + if (!v8086_mode(regs) && SEGMENT_IS_KERNEL_CODE(regs->xcs) && + in_lock_functions(pc)) { +#ifdef CONFIG_FRAME_POINTER + return *(unsigned long *)(regs->ebp + 4); +#else + unsigned long *sp = (unsigned long *)®s->esp; + + /* Return address is either directly at stack pointer + or above a saved eflags. Eflags has bits 22-31 zero, + kernel addresses don't. */ + if (sp[0] >> 22) + return sp[0]; + if (sp[1] >> 22) + return sp[1]; +#endif + } +#endif + return pc; +} +EXPORT_SYMBOL(profile_pc); + +/* + * This is the same as the above, except we _also_ save the current + * Time Stamp Counter value at the time of the timer interrupt, so that + * we later on can estimate the time of day more exactly. + */ +irqreturn_t timer_interrupt(int irq, void *dev_id) +{ +#ifdef CONFIG_X86_IO_APIC + if (timer_ack) { + /* + * Subtle, when I/O APICs are used we have to ack timer IRQ + * manually to reset the IRR bit for do_slow_gettimeoffset(). + * This will also deassert NMI lines for the watchdog if run + * on an 82489DX-based system. + */ + spin_lock(&i8259A_lock); + outb(0x0c, PIC_MASTER_OCW3); + /* Ack the IRQ; AEOI will end it automatically. */ + inb(PIC_MASTER_POLL); + spin_unlock(&i8259A_lock); + } +#endif + + do_timer_interrupt_hook(); + + if (MCA_bus) { + /* The PS/2 uses level-triggered interrupts. You can't + turn them off, nor would you want to (any attempt to + enable edge-triggered interrupts usually gets intercepted by a + special hardware circuit). Hence we have to acknowledge + the timer interrupt. Through some incredibly stupid + design idea, the reset for IRQ 0 is done by setting the + high bit of the PPI port B (0x61). Note that some PS/2s, + notably the 55SX, work fine if this is removed. */ + + u8 irq_v = inb_p( 0x61 ); /* read the current state */ + outb_p( irq_v|0x80, 0x61 ); /* reset the IRQ */ + } + + return IRQ_HANDLED; +} + +/* not static: needed by APM */ +unsigned long read_persistent_clock(void) +{ + unsigned long retval; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + + retval = get_wallclock(); + + spin_unlock_irqrestore(&rtc_lock, flags); + + return retval; +} + +int update_persistent_clock(struct timespec now) +{ + return set_rtc_mmss(now.tv_sec); +} + +extern void (*late_time_init)(void); +/* Duplicate of time_init() below, with hpet_enable part added */ +void __init hpet_time_init(void) +{ + if (!hpet_enable()) + setup_pit_timer(); + time_init_hook(); +} + +/* + * This is called directly from init code; we must delay timer setup in the + * HPET case as we can't make the decision to turn on HPET this early in the + * boot process. + * + * The chosen time_init function will usually be hpet_time_init, above, but + * in the case of virtual hardware, an alternative function may be substituted. + */ +void __init time_init(void) +{ + tsc_init(); + late_time_init = choose_time_init(); +} diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c new file mode 100644 index 000000000000..6d48a4e826d9 --- /dev/null +++ b/arch/x86/kernel/time_64.c @@ -0,0 +1,447 @@ +/* + * linux/arch/x86-64/kernel/time.c + * + * "High Precision Event Timer" based timekeeping. + * + * Copyright (c) 1991,1992,1995 Linus Torvalds + * Copyright (c) 1994 Alan Modra + * Copyright (c) 1995 Markus Kuhn + * Copyright (c) 1996 Ingo Molnar + * Copyright (c) 1998 Andrea Arcangeli + * Copyright (c) 2002,2006 Vojtech Pavlik + * Copyright (c) 2003 Andi Kleen + * RTC support code taken from arch/i386/kernel/timers/time_hpet.c + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/mc146818rtc.h> +#include <linux/time.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/sysdev.h> +#include <linux/bcd.h> +#include <linux/notifier.h> +#include <linux/cpu.h> +#include <linux/kallsyms.h> +#include <linux/acpi.h> +#ifdef CONFIG_ACPI +#include <acpi/achware.h> /* for PM timer frequency */ +#include <acpi/acpi_bus.h> +#endif +#include <asm/8253pit.h> +#include <asm/i8253.h> +#include <asm/pgtable.h> +#include <asm/vsyscall.h> +#include <asm/timex.h> +#include <asm/proto.h> +#include <asm/hpet.h> +#include <asm/sections.h> +#include <linux/hpet.h> +#include <asm/apic.h> +#include <asm/hpet.h> +#include <asm/mpspec.h> +#include <asm/nmi.h> +#include <asm/vgtod.h> + +static char *timename = NULL; + +DEFINE_SPINLOCK(rtc_lock); +EXPORT_SYMBOL(rtc_lock); +DEFINE_SPINLOCK(i8253_lock); +EXPORT_SYMBOL(i8253_lock); + +volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; + +unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + + /* Assume the lock function has either no stack frame or a copy + of eflags from PUSHF + Eflags always has bits 22 and up cleared unlike kernel addresses. */ + if (!user_mode(regs) && in_lock_functions(pc)) { + unsigned long *sp = (unsigned long *)regs->rsp; + if (sp[0] >> 22) + return sp[0]; + if (sp[1] >> 22) + return sp[1]; + } + return pc; +} +EXPORT_SYMBOL(profile_pc); + +/* + * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500 + * ms after the second nowtime has started, because when nowtime is written + * into the registers of the CMOS clock, it will jump to the next second + * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data + * sheet for details. + */ + +static int set_rtc_mmss(unsigned long nowtime) +{ + int retval = 0; + int real_seconds, real_minutes, cmos_minutes; + unsigned char control, freq_select; + +/* + * IRQs are disabled when we're called from the timer interrupt, + * no need for spin_lock_irqsave() + */ + + spin_lock(&rtc_lock); + +/* + * Tell the clock it's being set and stop it. + */ + + control = CMOS_READ(RTC_CONTROL); + CMOS_WRITE(control | RTC_SET, RTC_CONTROL); + + freq_select = CMOS_READ(RTC_FREQ_SELECT); + CMOS_WRITE(freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT); + + cmos_minutes = CMOS_READ(RTC_MINUTES); + BCD_TO_BIN(cmos_minutes); + +/* + * since we're only adjusting minutes and seconds, don't interfere with hour + * overflow. This avoids messing with unknown time zones but requires your RTC + * not to be off by more than 15 minutes. Since we're calling it only when + * our clock is externally synchronized using NTP, this shouldn't be a problem. + */ + + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) >= 30) { + printk(KERN_WARNING "time.c: can't update CMOS clock " + "from %d to %d\n", cmos_minutes, real_minutes); + retval = -1; + } else { + BIN_TO_BCD(real_seconds); + BIN_TO_BCD(real_minutes); + CMOS_WRITE(real_seconds, RTC_SECONDS); + CMOS_WRITE(real_minutes, RTC_MINUTES); + } + +/* + * The following flags have to be released exactly in this order, otherwise the + * DS12887 (popular MC146818A clone with integrated battery and quartz) will + * not reset the oscillator and will not update precisely 500 ms later. You + * won't find this mentioned in the Dallas Semiconductor data sheets, but who + * believes data sheets anyway ... -- Markus Kuhn + */ + + CMOS_WRITE(control, RTC_CONTROL); + CMOS_WRITE(freq_select, RTC_FREQ_SELECT); + + spin_unlock(&rtc_lock); + + return retval; +} + +int update_persistent_clock(struct timespec now) +{ + return set_rtc_mmss(now.tv_sec); +} + +void main_timer_handler(void) +{ +/* + * Here we are in the timer irq handler. We have irqs locally disabled (so we + * don't need spin_lock_irqsave()) but we don't know if the timer_bh is running + * on the other CPU, so we need a lock. We also need to lock the vsyscall + * variables, because both do_timer() and us change them -arca+vojtech + */ + + write_seqlock(&xtime_lock); + +/* + * Do the timer stuff. + */ + + do_timer(1); +#ifndef CONFIG_SMP + update_process_times(user_mode(get_irq_regs())); +#endif + +/* + * In the SMP case we use the local APIC timer interrupt to do the profiling, + * except when we simulate SMP mode on a uniprocessor system, in that case we + * have to call the local interrupt handler. + */ + + if (!using_apic_timer) + smp_local_timer_interrupt(); + + write_sequnlock(&xtime_lock); +} + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + if (apic_runs_main_timer > 1) + return IRQ_HANDLED; + main_timer_handler(); + if (using_apic_timer) + smp_send_timer_broadcast_ipi(); + return IRQ_HANDLED; +} + +unsigned long read_persistent_clock(void) +{ + unsigned int year, mon, day, hour, min, sec; + unsigned long flags; + unsigned century = 0; + + spin_lock_irqsave(&rtc_lock, flags); + + do { + sec = CMOS_READ(RTC_SECONDS); + min = CMOS_READ(RTC_MINUTES); + hour = CMOS_READ(RTC_HOURS); + day = CMOS_READ(RTC_DAY_OF_MONTH); + mon = CMOS_READ(RTC_MONTH); + year = CMOS_READ(RTC_YEAR); +#ifdef CONFIG_ACPI + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && + acpi_gbl_FADT.century) + century = CMOS_READ(acpi_gbl_FADT.century); +#endif + } while (sec != CMOS_READ(RTC_SECONDS)); + + spin_unlock_irqrestore(&rtc_lock, flags); + + /* + * We know that x86-64 always uses BCD format, no need to check the + * config register. + */ + + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + + if (century) { + BCD_TO_BIN(century); + year += century * 100; + printk(KERN_INFO "Extended CMOS year: %d\n", century * 100); + } else { + /* + * x86-64 systems only exists since 2002. + * This will work up to Dec 31, 2100 + */ + year += 2000; + } + + return mktime(year, mon, day, hour, min, sec); +} + +/* calibrate_cpu is used on systems with fixed rate TSCs to determine + * processor frequency */ +#define TICK_COUNT 100000000 +static unsigned int __init tsc_calibrate_cpu_khz(void) +{ + int tsc_start, tsc_now; + int i, no_ctr_free; + unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0; + unsigned long flags; + + for (i = 0; i < 4; i++) + if (avail_to_resrv_perfctr_nmi_bit(i)) + break; + no_ctr_free = (i == 4); + if (no_ctr_free) { + i = 3; + rdmsrl(MSR_K7_EVNTSEL3, evntsel3); + wrmsrl(MSR_K7_EVNTSEL3, 0); + rdmsrl(MSR_K7_PERFCTR3, pmc3); + } else { + reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i); + reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i); + } + local_irq_save(flags); + /* start meauring cycles, incrementing from 0 */ + wrmsrl(MSR_K7_PERFCTR0 + i, 0); + wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76); + rdtscl(tsc_start); + do { + rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now); + tsc_now = get_cycles_sync(); + } while ((tsc_now - tsc_start) < TICK_COUNT); + + local_irq_restore(flags); + if (no_ctr_free) { + wrmsrl(MSR_K7_EVNTSEL3, 0); + wrmsrl(MSR_K7_PERFCTR3, pmc3); + wrmsrl(MSR_K7_EVNTSEL3, evntsel3); + } else { + release_perfctr_nmi(MSR_K7_PERFCTR0 + i); + release_evntsel_nmi(MSR_K7_EVNTSEL0 + i); + } + + return pmc_now * tsc_khz / (tsc_now - tsc_start); +} + +/* + * pit_calibrate_tsc() uses the speaker output (channel 2) of + * the PIT. This is better than using the timer interrupt output, + * because we can read the value of the speaker with just one inb(), + * where we need three i/o operations for the interrupt channel. + * We count how many ticks the TSC does in 50 ms. + */ + +static unsigned int __init pit_calibrate_tsc(void) +{ + unsigned long start, end; + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + + outb((inb(0x61) & ~0x02) | 0x01, 0x61); + + outb(0xb0, 0x43); + outb((PIT_TICK_RATE / (1000 / 50)) & 0xff, 0x42); + outb((PIT_TICK_RATE / (1000 / 50)) >> 8, 0x42); + start = get_cycles_sync(); + while ((inb(0x61) & 0x20) == 0); + end = get_cycles_sync(); + + spin_unlock_irqrestore(&i8253_lock, flags); + + return (end - start) / 50; +} + +#define PIT_MODE 0x43 +#define PIT_CH0 0x40 + +static void __pit_init(int val, u8 mode) +{ + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + outb_p(mode, PIT_MODE); + outb_p(val & 0xff, PIT_CH0); /* LSB */ + outb_p(val >> 8, PIT_CH0); /* MSB */ + spin_unlock_irqrestore(&i8253_lock, flags); +} + +void __init pit_init(void) +{ + __pit_init(LATCH, 0x34); /* binary, mode 2, LSB/MSB, ch 0 */ +} + +void pit_stop_interrupt(void) +{ + __pit_init(0, 0x30); /* mode 0 */ +} + +void stop_timer_interrupt(void) +{ + char *name; + if (hpet_address) { + name = "HPET"; + hpet_timer_stop_set_go(0); + } else { + name = "PIT"; + pit_stop_interrupt(); + } + printk(KERN_INFO "timer: %s interrupt stopped.\n", name); +} + +static struct irqaction irq0 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_IRQPOLL, + .mask = CPU_MASK_NONE, + .name = "timer" +}; + +void __init time_init(void) +{ + if (nohpet) + hpet_address = 0; + + if (hpet_arch_init()) + hpet_address = 0; + + if (hpet_use_timer) { + /* set tick_nsec to use the proper rate for HPET */ + tick_nsec = TICK_NSEC_HPET; + tsc_khz = hpet_calibrate_tsc(); + timename = "HPET"; + } else { + pit_init(); + tsc_khz = pit_calibrate_tsc(); + timename = "PIT"; + } + + cpu_khz = tsc_khz; + if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) && + boot_cpu_data.x86_vendor == X86_VENDOR_AMD && + boot_cpu_data.x86 == 16) + cpu_khz = tsc_calibrate_cpu_khz(); + + if (unsynchronized_tsc()) + mark_tsc_unstable("TSCs unsynchronized"); + + if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) + vgetcpu_mode = VGETCPU_RDTSCP; + else + vgetcpu_mode = VGETCPU_LSL; + + set_cyc2ns_scale(tsc_khz); + printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", + cpu_khz / 1000, cpu_khz % 1000); + init_tsc_clocksource(); + + setup_irq(0, &irq0); +} + +/* + * sysfs support for the timer. + */ + +static int timer_suspend(struct sys_device *dev, pm_message_t state) +{ + return 0; +} + +static int timer_resume(struct sys_device *dev) +{ + if (hpet_address) + hpet_reenable(); + else + i8254_timer_resume(); + return 0; +} + +static struct sysdev_class timer_sysclass = { + .resume = timer_resume, + .suspend = timer_suspend, + set_kset_name("timer"), +}; + +/* XXX this sysfs stuff should probably go elsewhere later -john */ +static struct sys_device device_timer = { + .id = 0, + .cls = &timer_sysclass, +}; + +static int time_init_device(void) +{ + int error = sysdev_class_register(&timer_sysclass); + if (!error) + error = sysdev_register(&device_timer); + return error; +} + +device_initcall(time_init_device); diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c new file mode 100644 index 000000000000..45782356a618 --- /dev/null +++ b/arch/x86/kernel/topology.c @@ -0,0 +1,77 @@ +/* + * arch/i386/kernel/topology.c - Populate sysfs with topology information + * + * Written by: Matthew Dobson, IBM Corporation + * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <colpatch@us.ibm.com> + */ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/nodemask.h> +#include <linux/mmzone.h> +#include <asm/cpu.h> + +static struct i386_cpu cpu_devices[NR_CPUS]; + +int arch_register_cpu(int num) +{ + /* + * CPU0 cannot be offlined due to several + * restrictions and assumptions in kernel. This basically + * doesnt add a control file, one cannot attempt to offline + * BSP. + * + * Also certain PCI quirks require not to enable hotplug control + * for all CPU's. + */ + if (num && enable_cpu_hotplug) + cpu_devices[num].cpu.hotpluggable = 1; + + return register_cpu(&cpu_devices[num].cpu, num); +} + +#ifdef CONFIG_HOTPLUG_CPU +int enable_cpu_hotplug = 1; + +void arch_unregister_cpu(int num) { + return unregister_cpu(&cpu_devices[num].cpu); +} +EXPORT_SYMBOL(arch_register_cpu); +EXPORT_SYMBOL(arch_unregister_cpu); +#endif /*CONFIG_HOTPLUG_CPU*/ + +static int __init topology_init(void) +{ + int i; + +#ifdef CONFIG_NUMA + for_each_online_node(i) + register_one_node(i); +#endif /* CONFIG_NUMA */ + + for_each_present_cpu(i) + arch_register_cpu(i); + return 0; +} + +subsys_initcall(topology_init); diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S new file mode 100644 index 000000000000..f62815f8d06a --- /dev/null +++ b/arch/x86/kernel/trampoline_32.S @@ -0,0 +1,85 @@ +/* + * + * Trampoline.S Derived from Setup.S by Linus Torvalds + * + * 4 Jan 1997 Michael Chastain: changed to gnu as. + * + * This is only used for booting secondary CPUs in SMP machine + * + * Entry: CS:IP point to the start of our code, we are + * in real mode with no stack, but the rest of the + * trampoline page to make our stack and everything else + * is a mystery. + * + * In fact we don't actually need a stack so we don't + * set one up. + * + * We jump into the boot/compressed/head.S code. So you'd + * better be running a compressed kernel image or you + * won't get very far. + * + * On entry to trampoline_data, the processor is in real mode + * with 16-bit addressing and 16-bit data. CS has some value + * and IP is zero. Thus, data addresses need to be absolute + * (no relocation) and are taken with regard to r_base. + * + * If you work on this file, check the object module with + * objdump --reloc to make sure there are no relocation + * entries except for: + * + * TYPE VALUE + * R_386_32 startup_32_smp + * R_386_32 boot_gdt + */ + +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/page.h> + +.data + +/* We can free up trampoline after bootup if cpu hotplug is not supported. */ +#ifndef CONFIG_HOTPLUG_CPU +.section ".init.data","aw",@progbits +#endif + +.code16 + +ENTRY(trampoline_data) +r_base = . + wbinvd # Needed for NUMA-Q should be harmless for others + mov %cs, %ax # Code and data in the same place + mov %ax, %ds + + cli # We should be safe anyway + + movl $0xA5A5A5A5, trampoline_data - r_base + # write marker for master knows we're running + + /* GDT tables in non default location kernel can be beyond 16MB and + * lgdt will not be able to load the address as in real mode default + * operand size is 16bit. Use lgdtl instead to force operand size + * to 32 bit. + */ + + lidtl boot_idt_descr - r_base # load idt with 0, 0 + lgdtl boot_gdt_descr - r_base # load gdt with whatever is appropriate + + xor %ax, %ax + inc %ax # protected mode (PE) bit + lmsw %ax # into protected mode + # flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S + ljmpl $__BOOT_CS, $(startup_32_smp-__PAGE_OFFSET) + + # These need to be in the same 64K segment as the above; + # hence we don't use the boot_gdt_descr defined in head.S +boot_gdt_descr: + .word __BOOT_DS + 7 # gdt limit + .long boot_gdt - __PAGE_OFFSET # gdt base + +boot_idt_descr: + .word 0 # idt limit = 0 + .long 0 # idt base = 0L + +.globl trampoline_end +trampoline_end: diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S new file mode 100644 index 000000000000..607983b0d27b --- /dev/null +++ b/arch/x86/kernel/trampoline_64.S @@ -0,0 +1,166 @@ +/* + * + * Trampoline.S Derived from Setup.S by Linus Torvalds + * + * 4 Jan 1997 Michael Chastain: changed to gnu as. + * 15 Sept 2005 Eric Biederman: 64bit PIC support + * + * Entry: CS:IP point to the start of our code, we are + * in real mode with no stack, but the rest of the + * trampoline page to make our stack and everything else + * is a mystery. + * + * In fact we don't actually need a stack so we don't + * set one up. + * + * On entry to trampoline_data, the processor is in real mode + * with 16-bit addressing and 16-bit data. CS has some value + * and IP is zero. Thus, data addresses need to be absolute + * (no relocation) and are taken with regard to r_base. + * + * With the addition of trampoline_level4_pgt this code can + * now enter a 64bit kernel that lives at arbitrary 64bit + * physical addresses. + * + * If you work on this file, check the object module with objdump + * --full-contents --reloc to make sure there are no relocation + * entries. + */ + +#include <linux/linkage.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/msr.h> +#include <asm/segment.h> + +.data + +.code16 + +ENTRY(trampoline_data) +r_base = . + cli # We should be safe anyway + wbinvd + mov %cs, %ax # Code and data in the same place + mov %ax, %ds + mov %ax, %es + mov %ax, %ss + + + movl $0xA5A5A5A5, trampoline_data - r_base + # write marker for master knows we're running + + # Setup stack + movw $(trampoline_stack_end - r_base), %sp + + call verify_cpu # Verify the cpu supports long mode + testl %eax, %eax # Check for return code + jnz no_longmode + + mov %cs, %ax + movzx %ax, %esi # Find the 32bit trampoline location + shll $4, %esi + + # Fixup the vectors + addl %esi, startup_32_vector - r_base + addl %esi, startup_64_vector - r_base + addl %esi, tgdt + 2 - r_base # Fixup the gdt pointer + + /* + * GDT tables in non default location kernel can be beyond 16MB and + * lgdt will not be able to load the address as in real mode default + * operand size is 16bit. Use lgdtl instead to force operand size + * to 32 bit. + */ + + lidtl tidt - r_base # load idt with 0, 0 + lgdtl tgdt - r_base # load gdt with whatever is appropriate + + xor %ax, %ax + inc %ax # protected mode (PE) bit + lmsw %ax # into protected mode + + # flush prefetch and jump to startup_32 + ljmpl *(startup_32_vector - r_base) + + .code32 + .balign 4 +startup_32: + movl $__KERNEL_DS, %eax # Initialize the %ds segment register + movl %eax, %ds + + xorl %eax, %eax + btsl $5, %eax # Enable PAE mode + movl %eax, %cr4 + + # Setup trampoline 4 level pagetables + leal (trampoline_level4_pgt - r_base)(%esi), %eax + movl %eax, %cr3 + + movl $MSR_EFER, %ecx + movl $(1 << _EFER_LME), %eax # Enable Long Mode + xorl %edx, %edx + wrmsr + + xorl %eax, %eax + btsl $31, %eax # Enable paging and in turn activate Long Mode + btsl $0, %eax # Enable protected mode + movl %eax, %cr0 + + /* + * At this point we're in long mode but in 32bit compatibility mode + * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn + * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + */ + ljmp *(startup_64_vector - r_base)(%esi) + + .code64 + .balign 4 +startup_64: + # Now jump into the kernel using virtual addresses + movq $secondary_startup_64, %rax + jmp *%rax + + .code16 +no_longmode: + hlt + jmp no_longmode +#include "verify_cpu_64.S" + + # Careful these need to be in the same 64K segment as the above; +tidt: + .word 0 # idt limit = 0 + .word 0, 0 # idt base = 0L + + # Duplicate the global descriptor table + # so the kernel can live anywhere + .balign 4 +tgdt: + .short tgdt_end - tgdt # gdt limit + .long tgdt - r_base + .short 0 + .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DS +tgdt_end: + + .balign 4 +startup_32_vector: + .long startup_32 - r_base + .word __KERNEL32_CS, 0 + + .balign 4 +startup_64_vector: + .long startup_64 - r_base + .word __KERNEL_CS, 0 + +trampoline_stack: + .org 0x1000 +trampoline_stack_end: +ENTRY(trampoline_level4_pgt) + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 510,8,0 + .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE + +ENTRY(trampoline_end) diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c new file mode 100644 index 000000000000..47b0bef335bd --- /dev/null +++ b/arch/x86/kernel/traps_32.c @@ -0,0 +1,1250 @@ +/* + * linux/arch/i386/traps.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Pentium III FXSR, SSE support + * Gareth Hughes <gareth@valinux.com>, May 2000 + */ + +/* + * 'Traps.c' handles hardware traps and faults after we have saved some + * state in 'asm.s'. + */ +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/highmem.h> +#include <linux/kallsyms.h> +#include <linux/ptrace.h> +#include <linux/utsname.h> +#include <linux/kprobes.h> +#include <linux/kexec.h> +#include <linux/unwind.h> +#include <linux/uaccess.h> +#include <linux/nmi.h> +#include <linux/bug.h> + +#ifdef CONFIG_EISA +#include <linux/ioport.h> +#include <linux/eisa.h> +#endif + +#ifdef CONFIG_MCA +#include <linux/mca.h> +#endif + +#if defined(CONFIG_EDAC) +#include <linux/edac.h> +#endif + +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/atomic.h> +#include <asm/debugreg.h> +#include <asm/desc.h> +#include <asm/i387.h> +#include <asm/nmi.h> +#include <asm/unwind.h> +#include <asm/smp.h> +#include <asm/arch_hooks.h> +#include <linux/kdebug.h> +#include <asm/stacktrace.h> + +#include <linux/module.h> + +#include "mach_traps.h" + +int panic_on_unrecovered_nmi; + +asmlinkage int system_call(void); + +/* Do we ignore FPU interrupts ? */ +char ignore_fpu_irq = 0; + +/* + * The IDT has to be page-aligned to simplify the Pentium + * F0 0F bug workaround.. We have a special link segment + * for this. + */ +struct desc_struct idt_table[256] __attribute__((__section__(".data.idt"))) = { {0, 0}, }; + +asmlinkage void divide_error(void); +asmlinkage void debug(void); +asmlinkage void nmi(void); +asmlinkage void int3(void); +asmlinkage void overflow(void); +asmlinkage void bounds(void); +asmlinkage void invalid_op(void); +asmlinkage void device_not_available(void); +asmlinkage void coprocessor_segment_overrun(void); +asmlinkage void invalid_TSS(void); +asmlinkage void segment_not_present(void); +asmlinkage void stack_segment(void); +asmlinkage void general_protection(void); +asmlinkage void page_fault(void); +asmlinkage void coprocessor_error(void); +asmlinkage void simd_coprocessor_error(void); +asmlinkage void alignment_check(void); +asmlinkage void spurious_interrupt_bug(void); +asmlinkage void machine_check(void); + +int kstack_depth_to_print = 24; +static unsigned int code_bytes = 64; + +static inline int valid_stack_ptr(struct thread_info *tinfo, void *p, unsigned size) +{ + return p > (void *)tinfo && + p <= (void *)tinfo + THREAD_SIZE - size; +} + +/* The form of the top of the frame on the stack */ +struct stack_frame { + struct stack_frame *next_frame; + unsigned long return_address; +}; + +static inline unsigned long print_context_stack(struct thread_info *tinfo, + unsigned long *stack, unsigned long ebp, + struct stacktrace_ops *ops, void *data) +{ +#ifdef CONFIG_FRAME_POINTER + struct stack_frame *frame = (struct stack_frame *)ebp; + while (valid_stack_ptr(tinfo, frame, sizeof(*frame))) { + struct stack_frame *next; + unsigned long addr; + + addr = frame->return_address; + ops->address(data, addr); + /* + * break out of recursive entries (such as + * end_of_stack_stop_unwind_function). Also, + * we can never allow a frame pointer to + * move downwards! + */ + next = frame->next_frame; + if (next <= frame) + break; + frame = next; + } +#else + while (valid_stack_ptr(tinfo, stack, sizeof(*stack))) { + unsigned long addr; + + addr = *stack++; + if (__kernel_text_address(addr)) + ops->address(data, addr); + } +#endif + return ebp; +} + +#define MSG(msg) ops->warning(data, msg) + +void dump_trace(struct task_struct *task, struct pt_regs *regs, + unsigned long *stack, + struct stacktrace_ops *ops, void *data) +{ + unsigned long ebp = 0; + + if (!task) + task = current; + + if (!stack) { + unsigned long dummy; + stack = &dummy; + if (task != current) + stack = (unsigned long *)task->thread.esp; + } + +#ifdef CONFIG_FRAME_POINTER + if (!ebp) { + if (task == current) { + /* Grab ebp right from our regs */ + asm ("movl %%ebp, %0" : "=r" (ebp) : ); + } else { + /* ebp is the last reg pushed by switch_to */ + ebp = *(unsigned long *) task->thread.esp; + } + } +#endif + + while (1) { + struct thread_info *context; + context = (struct thread_info *) + ((unsigned long)stack & (~(THREAD_SIZE - 1))); + ebp = print_context_stack(context, stack, ebp, ops, data); + /* Should be after the line below, but somewhere + in early boot context comes out corrupted and we + can't reference it -AK */ + if (ops->stack(data, "IRQ") < 0) + break; + stack = (unsigned long*)context->previous_esp; + if (!stack) + break; + touch_nmi_watchdog(); + } +} +EXPORT_SYMBOL(dump_trace); + +static void +print_trace_warning_symbol(void *data, char *msg, unsigned long symbol) +{ + printk(data); + print_symbol(msg, symbol); + printk("\n"); +} + +static void print_trace_warning(void *data, char *msg) +{ + printk("%s%s\n", (char *)data, msg); +} + +static int print_trace_stack(void *data, char *name) +{ + return 0; +} + +/* + * Print one address/symbol entries per line. + */ +static void print_trace_address(void *data, unsigned long addr) +{ + printk("%s [<%08lx>] ", (char *)data, addr); + print_symbol("%s\n", addr); + touch_nmi_watchdog(); +} + +static struct stacktrace_ops print_trace_ops = { + .warning = print_trace_warning, + .warning_symbol = print_trace_warning_symbol, + .stack = print_trace_stack, + .address = print_trace_address, +}; + +static void +show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, + unsigned long * stack, char *log_lvl) +{ + dump_trace(task, regs, stack, &print_trace_ops, log_lvl); + printk("%s =======================\n", log_lvl); +} + +void show_trace(struct task_struct *task, struct pt_regs *regs, + unsigned long * stack) +{ + show_trace_log_lvl(task, regs, stack, ""); +} + +static void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, + unsigned long *esp, char *log_lvl) +{ + unsigned long *stack; + int i; + + if (esp == NULL) { + if (task) + esp = (unsigned long*)task->thread.esp; + else + esp = (unsigned long *)&esp; + } + + stack = esp; + for(i = 0; i < kstack_depth_to_print; i++) { + if (kstack_end(stack)) + break; + if (i && ((i % 8) == 0)) + printk("\n%s ", log_lvl); + printk("%08lx ", *stack++); + } + printk("\n%sCall Trace:\n", log_lvl); + show_trace_log_lvl(task, regs, esp, log_lvl); +} + +void show_stack(struct task_struct *task, unsigned long *esp) +{ + printk(" "); + show_stack_log_lvl(task, NULL, esp, ""); +} + +/* + * The architecture-independent dump_stack generator + */ +void dump_stack(void) +{ + unsigned long stack; + + show_trace(current, NULL, &stack); +} + +EXPORT_SYMBOL(dump_stack); + +void show_registers(struct pt_regs *regs) +{ + int i; + int in_kernel = 1; + unsigned long esp; + unsigned short ss, gs; + + esp = (unsigned long) (®s->esp); + savesegment(ss, ss); + savesegment(gs, gs); + if (user_mode_vm(regs)) { + in_kernel = 0; + esp = regs->esp; + ss = regs->xss & 0xffff; + } + print_modules(); + printk(KERN_EMERG "CPU: %d\n" + KERN_EMERG "EIP: %04x:[<%08lx>] %s VLI\n" + KERN_EMERG "EFLAGS: %08lx (%s %.*s)\n", + smp_processor_id(), 0xffff & regs->xcs, regs->eip, + print_tainted(), regs->eflags, init_utsname()->release, + (int)strcspn(init_utsname()->version, " "), + init_utsname()->version); + print_symbol(KERN_EMERG "EIP is at %s\n", regs->eip); + printk(KERN_EMERG "eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", + regs->eax, regs->ebx, regs->ecx, regs->edx); + printk(KERN_EMERG "esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", + regs->esi, regs->edi, regs->ebp, esp); + printk(KERN_EMERG "ds: %04x es: %04x fs: %04x gs: %04x ss: %04x\n", + regs->xds & 0xffff, regs->xes & 0xffff, regs->xfs & 0xffff, gs, ss); + printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)", + TASK_COMM_LEN, current->comm, current->pid, + current_thread_info(), current, task_thread_info(current)); + /* + * When in-kernel, we also print out the stack and code at the + * time of the fault.. + */ + if (in_kernel) { + u8 *eip; + unsigned int code_prologue = code_bytes * 43 / 64; + unsigned int code_len = code_bytes; + unsigned char c; + + printk("\n" KERN_EMERG "Stack: "); + show_stack_log_lvl(NULL, regs, (unsigned long *)esp, KERN_EMERG); + + printk(KERN_EMERG "Code: "); + + eip = (u8 *)regs->eip - code_prologue; + if (eip < (u8 *)PAGE_OFFSET || + probe_kernel_address(eip, c)) { + /* try starting at EIP */ + eip = (u8 *)regs->eip; + code_len = code_len - code_prologue + 1; + } + for (i = 0; i < code_len; i++, eip++) { + if (eip < (u8 *)PAGE_OFFSET || + probe_kernel_address(eip, c)) { + printk(" Bad EIP value."); + break; + } + if (eip == (u8 *)regs->eip) + printk("<%02x> ", c); + else + printk("%02x ", c); + } + } + printk("\n"); +} + +int is_valid_bugaddr(unsigned long eip) +{ + unsigned short ud2; + + if (eip < PAGE_OFFSET) + return 0; + if (probe_kernel_address((unsigned short *)eip, ud2)) + return 0; + + return ud2 == 0x0b0f; +} + +/* + * This is gone through when something in the kernel has done something bad and + * is about to be terminated. + */ +void die(const char * str, struct pt_regs * regs, long err) +{ + static struct { + spinlock_t lock; + u32 lock_owner; + int lock_owner_depth; + } die = { + .lock = __SPIN_LOCK_UNLOCKED(die.lock), + .lock_owner = -1, + .lock_owner_depth = 0 + }; + static int die_counter; + unsigned long flags; + + oops_enter(); + + if (die.lock_owner != raw_smp_processor_id()) { + console_verbose(); + spin_lock_irqsave(&die.lock, flags); + die.lock_owner = smp_processor_id(); + die.lock_owner_depth = 0; + bust_spinlocks(1); + } + else + local_save_flags(flags); + + if (++die.lock_owner_depth < 3) { + int nl = 0; + unsigned long esp; + unsigned short ss; + + report_bug(regs->eip, regs); + + printk(KERN_EMERG "%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); +#ifdef CONFIG_PREEMPT + printk(KERN_EMERG "PREEMPT "); + nl = 1; +#endif +#ifdef CONFIG_SMP + if (!nl) + printk(KERN_EMERG); + printk("SMP "); + nl = 1; +#endif +#ifdef CONFIG_DEBUG_PAGEALLOC + if (!nl) + printk(KERN_EMERG); + printk("DEBUG_PAGEALLOC"); + nl = 1; +#endif + if (nl) + printk("\n"); + if (notify_die(DIE_OOPS, str, regs, err, + current->thread.trap_no, SIGSEGV) != + NOTIFY_STOP) { + show_registers(regs); + /* Executive summary in case the oops scrolled away */ + esp = (unsigned long) (®s->esp); + savesegment(ss, ss); + if (user_mode(regs)) { + esp = regs->esp; + ss = regs->xss & 0xffff; + } + printk(KERN_EMERG "EIP: [<%08lx>] ", regs->eip); + print_symbol("%s", regs->eip); + printk(" SS:ESP %04x:%08lx\n", ss, esp); + } + else + regs = NULL; + } else + printk(KERN_EMERG "Recursive die() failure, output suppressed\n"); + + bust_spinlocks(0); + die.lock_owner = -1; + add_taint(TAINT_DIE); + spin_unlock_irqrestore(&die.lock, flags); + + if (!regs) + return; + + if (kexec_should_crash(current)) + crash_kexec(regs); + + if (in_interrupt()) + panic("Fatal exception in interrupt"); + + if (panic_on_oops) + panic("Fatal exception"); + + oops_exit(); + do_exit(SIGSEGV); +} + +static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err) +{ + if (!user_mode_vm(regs)) + die(str, regs, err); +} + +static void __kprobes do_trap(int trapnr, int signr, char *str, int vm86, + struct pt_regs * regs, long error_code, + siginfo_t *info) +{ + struct task_struct *tsk = current; + + if (regs->eflags & VM_MASK) { + if (vm86) + goto vm86_trap; + goto trap_signal; + } + + if (!user_mode(regs)) + goto kernel_trap; + + trap_signal: { + /* + * We want error_code and trap_no set for userspace faults and + * kernelspace faults which result in die(), but not + * kernelspace faults which are fixed up. die() gives the + * process no chance to handle the signal and notice the + * kernel fault information, so that won't result in polluting + * the information about previously queued, but not yet + * delivered, faults. See also do_general_protection below. + */ + tsk->thread.error_code = error_code; + tsk->thread.trap_no = trapnr; + + if (info) + force_sig_info(signr, info, tsk); + else + force_sig(signr, tsk); + return; + } + + kernel_trap: { + if (!fixup_exception(regs)) { + tsk->thread.error_code = error_code; + tsk->thread.trap_no = trapnr; + die(str, regs, error_code); + } + return; + } + + vm86_trap: { + int ret = handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, trapnr); + if (ret) goto trap_signal; + return; + } +} + +#define DO_ERROR(trapnr, signr, str, name) \ +fastcall void do_##name(struct pt_regs * regs, long error_code) \ +{ \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \ +} + +#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr, irq) \ +fastcall void do_##name(struct pt_regs * regs, long error_code) \ +{ \ + siginfo_t info; \ + if (irq) \ + local_irq_enable(); \ + info.si_signo = signr; \ + info.si_errno = 0; \ + info.si_code = sicode; \ + info.si_addr = (void __user *)siaddr; \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + do_trap(trapnr, signr, str, 0, regs, error_code, &info); \ +} + +#define DO_VM86_ERROR(trapnr, signr, str, name) \ +fastcall void do_##name(struct pt_regs * regs, long error_code) \ +{ \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \ +} + +#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ +fastcall void do_##name(struct pt_regs * regs, long error_code) \ +{ \ + siginfo_t info; \ + info.si_signo = signr; \ + info.si_errno = 0; \ + info.si_code = sicode; \ + info.si_addr = (void __user *)siaddr; \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + do_trap(trapnr, signr, str, 1, regs, error_code, &info); \ +} + +DO_VM86_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->eip) +#ifndef CONFIG_KPROBES +DO_VM86_ERROR( 3, SIGTRAP, "int3", int3) +#endif +DO_VM86_ERROR( 4, SIGSEGV, "overflow", overflow) +DO_VM86_ERROR( 5, SIGSEGV, "bounds", bounds) +DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->eip, 0) +DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) +DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) +DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) +DO_ERROR(12, SIGBUS, "stack segment", stack_segment) +DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0, 0) +DO_ERROR_INFO(32, SIGSEGV, "iret exception", iret_error, ILL_BADSTK, 0, 1) + +fastcall void __kprobes do_general_protection(struct pt_regs * regs, + long error_code) +{ + int cpu = get_cpu(); + struct tss_struct *tss = &per_cpu(init_tss, cpu); + struct thread_struct *thread = ¤t->thread; + + /* + * Perform the lazy TSS's I/O bitmap copy. If the TSS has an + * invalid offset set (the LAZY one) and the faulting thread has + * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS + * and we set the offset field correctly. Then we let the CPU to + * restart the faulting instruction. + */ + if (tss->x86_tss.io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY && + thread->io_bitmap_ptr) { + memcpy(tss->io_bitmap, thread->io_bitmap_ptr, + thread->io_bitmap_max); + /* + * If the previously set map was extending to higher ports + * than the current one, pad extra space with 0xff (no access). + */ + if (thread->io_bitmap_max < tss->io_bitmap_max) + memset((char *) tss->io_bitmap + + thread->io_bitmap_max, 0xff, + tss->io_bitmap_max - thread->io_bitmap_max); + tss->io_bitmap_max = thread->io_bitmap_max; + tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET; + tss->io_bitmap_owner = thread; + put_cpu(); + return; + } + put_cpu(); + + if (regs->eflags & VM_MASK) + goto gp_in_vm86; + + if (!user_mode(regs)) + goto gp_in_kernel; + + current->thread.error_code = error_code; + current->thread.trap_no = 13; + if (show_unhandled_signals && unhandled_signal(current, SIGSEGV) && + printk_ratelimit()) + printk(KERN_INFO + "%s[%d] general protection eip:%lx esp:%lx error:%lx\n", + current->comm, current->pid, + regs->eip, regs->esp, error_code); + + force_sig(SIGSEGV, current); + return; + +gp_in_vm86: + local_irq_enable(); + handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code); + return; + +gp_in_kernel: + if (!fixup_exception(regs)) { + current->thread.error_code = error_code; + current->thread.trap_no = 13; + if (notify_die(DIE_GPF, "general protection fault", regs, + error_code, 13, SIGSEGV) == NOTIFY_STOP) + return; + die("general protection fault", regs, error_code); + } +} + +static __kprobes void +mem_parity_error(unsigned char reason, struct pt_regs * regs) +{ + printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on " + "CPU %d.\n", reason, smp_processor_id()); + printk(KERN_EMERG "You have some hardware problem, likely on the PCI bus.\n"); + +#if defined(CONFIG_EDAC) + if(edac_handler_set()) { + edac_atomic_assert_error(); + return; + } +#endif + + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); + + /* Clear and disable the memory parity error line. */ + clear_mem_error(reason); +} + +static __kprobes void +io_check_error(unsigned char reason, struct pt_regs * regs) +{ + unsigned long i; + + printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n"); + show_registers(regs); + + /* Re-enable the IOCK line, wait for a few seconds */ + reason = (reason & 0xf) | 8; + outb(reason, 0x61); + i = 2000; + while (--i) udelay(1000); + reason &= ~8; + outb(reason, 0x61); +} + +static __kprobes void +unknown_nmi_error(unsigned char reason, struct pt_regs * regs) +{ +#ifdef CONFIG_MCA + /* Might actually be able to figure out what the guilty party + * is. */ + if( MCA_bus ) { + mca_handle_nmi(); + return; + } +#endif + printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on " + "CPU %d.\n", reason, smp_processor_id()); + printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n"); + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); +} + +static DEFINE_SPINLOCK(nmi_print_lock); + +void __kprobes die_nmi(struct pt_regs *regs, const char *msg) +{ + if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == + NOTIFY_STOP) + return; + + spin_lock(&nmi_print_lock); + /* + * We are in trouble anyway, lets at least try + * to get a message out. + */ + bust_spinlocks(1); + printk(KERN_EMERG "%s", msg); + printk(" on CPU%d, eip %08lx, registers:\n", + smp_processor_id(), regs->eip); + show_registers(regs); + console_silent(); + spin_unlock(&nmi_print_lock); + bust_spinlocks(0); + + /* If we are in kernel we are probably nested up pretty bad + * and might aswell get out now while we still can. + */ + if (!user_mode_vm(regs)) { + current->thread.trap_no = 2; + crash_kexec(regs); + } + + do_exit(SIGSEGV); +} + +static __kprobes void default_do_nmi(struct pt_regs * regs) +{ + unsigned char reason = 0; + + /* Only the BSP gets external NMIs from the system. */ + if (!smp_processor_id()) + reason = get_nmi_reason(); + + if (!(reason & 0xc0)) { + if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) + return; +#ifdef CONFIG_X86_LOCAL_APIC + /* + * Ok, so this is none of the documented NMI sources, + * so it must be the NMI watchdog. + */ + if (nmi_watchdog_tick(regs, reason)) + return; + if (!do_nmi_callback(regs, smp_processor_id())) +#endif + unknown_nmi_error(reason, regs); + + return; + } + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) + return; + if (reason & 0x80) + mem_parity_error(reason, regs); + if (reason & 0x40) + io_check_error(reason, regs); + /* + * Reassert NMI in case it became active meanwhile + * as it's edge-triggered. + */ + reassert_nmi(); +} + +static int ignore_nmis; + +fastcall __kprobes void do_nmi(struct pt_regs * regs, long error_code) +{ + int cpu; + + nmi_enter(); + + cpu = smp_processor_id(); + + ++nmi_count(cpu); + + if (!ignore_nmis) + default_do_nmi(regs); + + nmi_exit(); +} + +void stop_nmi(void) +{ + acpi_nmi_disable(); + ignore_nmis++; +} + +void restart_nmi(void) +{ + ignore_nmis--; + acpi_nmi_enable(); +} + +#ifdef CONFIG_KPROBES +fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code) +{ + if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) + == NOTIFY_STOP) + return; + /* This is an interrupt gate, because kprobes wants interrupts + disabled. Normal trap handlers don't. */ + restore_interrupts(regs); + do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL); +} +#endif + +/* + * Our handling of the processor debug registers is non-trivial. + * We do not clear them on entry and exit from the kernel. Therefore + * it is possible to get a watchpoint trap here from inside the kernel. + * However, the code in ./ptrace.c has ensured that the user can + * only set watchpoints on userspace addresses. Therefore the in-kernel + * watchpoint trap can only occur in code which is reading/writing + * from user space. Such code must not hold kernel locks (since it + * can equally take a page fault), therefore it is safe to call + * force_sig_info even though that claims and releases locks. + * + * Code in ./signal.c ensures that the debug control register + * is restored before we deliver any signal, and therefore that + * user code runs with the correct debug control register even though + * we clear it here. + * + * Being careful here means that we don't have to be as careful in a + * lot of more complicated places (task switching can be a bit lazy + * about restoring all the debug state, and ptrace doesn't have to + * find every occurrence of the TF bit that could be saved away even + * by user code) + */ +fastcall void __kprobes do_debug(struct pt_regs * regs, long error_code) +{ + unsigned int condition; + struct task_struct *tsk = current; + + get_debugreg(condition, 6); + + if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, + SIGTRAP) == NOTIFY_STOP) + return; + /* It's safe to allow irq's after DR6 has been saved */ + if (regs->eflags & X86_EFLAGS_IF) + local_irq_enable(); + + /* Mask out spurious debug traps due to lazy DR7 setting */ + if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) { + if (!tsk->thread.debugreg[7]) + goto clear_dr7; + } + + if (regs->eflags & VM_MASK) + goto debug_vm86; + + /* Save debug status register where ptrace can see it */ + tsk->thread.debugreg[6] = condition; + + /* + * Single-stepping through TF: make sure we ignore any events in + * kernel space (but re-enable TF when returning to user mode). + */ + if (condition & DR_STEP) { + /* + * We already checked v86 mode above, so we can + * check for kernel mode by just checking the CPL + * of CS. + */ + if (!user_mode(regs)) + goto clear_TF_reenable; + } + + /* Ok, finally something we can handle */ + send_sigtrap(tsk, regs, error_code); + + /* Disable additional traps. They'll be re-enabled when + * the signal is delivered. + */ +clear_dr7: + set_debugreg(0, 7); + return; + +debug_vm86: + handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1); + return; + +clear_TF_reenable: + set_tsk_thread_flag(tsk, TIF_SINGLESTEP); + regs->eflags &= ~TF_MASK; + return; +} + +/* + * Note that we play around with the 'TS' bit in an attempt to get + * the correct behaviour even in the presence of the asynchronous + * IRQ13 behaviour + */ +void math_error(void __user *eip) +{ + struct task_struct * task; + siginfo_t info; + unsigned short cwd, swd; + + /* + * Save the info for the exception handler and clear the error. + */ + task = current; + save_init_fpu(task); + task->thread.trap_no = 16; + task->thread.error_code = 0; + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = __SI_FAULT; + info.si_addr = eip; + /* + * (~cwd & swd) will mask out exceptions that are not set to unmasked + * status. 0x3f is the exception bits in these regs, 0x200 is the + * C1 reg you need in case of a stack fault, 0x040 is the stack + * fault bit. We should only be taking one exception at a time, + * so if this combination doesn't produce any single exception, + * then we have a bad program that isn't syncronizing its FPU usage + * and it will suffer the consequences since we won't be able to + * fully reproduce the context of the exception + */ + cwd = get_fpu_cwd(task); + swd = get_fpu_swd(task); + switch (swd & ~cwd & 0x3f) { + case 0x000: /* No unmasked exception */ + return; + default: /* Multiple exceptions */ + break; + case 0x001: /* Invalid Op */ + /* + * swd & 0x240 == 0x040: Stack Underflow + * swd & 0x240 == 0x240: Stack Overflow + * User must clear the SF bit (0x40) if set + */ + info.si_code = FPE_FLTINV; + break; + case 0x002: /* Denormalize */ + case 0x010: /* Underflow */ + info.si_code = FPE_FLTUND; + break; + case 0x004: /* Zero Divide */ + info.si_code = FPE_FLTDIV; + break; + case 0x008: /* Overflow */ + info.si_code = FPE_FLTOVF; + break; + case 0x020: /* Precision */ + info.si_code = FPE_FLTRES; + break; + } + force_sig_info(SIGFPE, &info, task); +} + +fastcall void do_coprocessor_error(struct pt_regs * regs, long error_code) +{ + ignore_fpu_irq = 1; + math_error((void __user *)regs->eip); +} + +static void simd_math_error(void __user *eip) +{ + struct task_struct * task; + siginfo_t info; + unsigned short mxcsr; + + /* + * Save the info for the exception handler and clear the error. + */ + task = current; + save_init_fpu(task); + task->thread.trap_no = 19; + task->thread.error_code = 0; + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = __SI_FAULT; + info.si_addr = eip; + /* + * The SIMD FPU exceptions are handled a little differently, as there + * is only a single status/control register. Thus, to determine which + * unmasked exception was caught we must mask the exception mask bits + * at 0x1f80, and then use these to mask the exception bits at 0x3f. + */ + mxcsr = get_fpu_mxcsr(task); + switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) { + case 0x000: + default: + break; + case 0x001: /* Invalid Op */ + info.si_code = FPE_FLTINV; + break; + case 0x002: /* Denormalize */ + case 0x010: /* Underflow */ + info.si_code = FPE_FLTUND; + break; + case 0x004: /* Zero Divide */ + info.si_code = FPE_FLTDIV; + break; + case 0x008: /* Overflow */ + info.si_code = FPE_FLTOVF; + break; + case 0x020: /* Precision */ + info.si_code = FPE_FLTRES; + break; + } + force_sig_info(SIGFPE, &info, task); +} + +fastcall void do_simd_coprocessor_error(struct pt_regs * regs, + long error_code) +{ + if (cpu_has_xmm) { + /* Handle SIMD FPU exceptions on PIII+ processors. */ + ignore_fpu_irq = 1; + simd_math_error((void __user *)regs->eip); + } else { + /* + * Handle strange cache flush from user space exception + * in all other cases. This is undocumented behaviour. + */ + if (regs->eflags & VM_MASK) { + handle_vm86_fault((struct kernel_vm86_regs *)regs, + error_code); + return; + } + current->thread.trap_no = 19; + current->thread.error_code = error_code; + die_if_kernel("cache flush denied", regs, error_code); + force_sig(SIGSEGV, current); + } +} + +fastcall void do_spurious_interrupt_bug(struct pt_regs * regs, + long error_code) +{ +#if 0 + /* No need to warn about this any longer. */ + printk("Ignoring P6 Local APIC Spurious Interrupt Bug...\n"); +#endif +} + +fastcall unsigned long patch_espfix_desc(unsigned long uesp, + unsigned long kesp) +{ + struct desc_struct *gdt = __get_cpu_var(gdt_page).gdt; + unsigned long base = (kesp - uesp) & -THREAD_SIZE; + unsigned long new_kesp = kesp - base; + unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT; + __u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS]; + /* Set up base for espfix segment */ + desc &= 0x00f0ff0000000000ULL; + desc |= ((((__u64)base) << 16) & 0x000000ffffff0000ULL) | + ((((__u64)base) << 32) & 0xff00000000000000ULL) | + ((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) | + (lim_pages & 0xffff); + *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc; + return new_kesp; +} + +/* + * 'math_state_restore()' saves the current math information in the + * old math state array, and gets the new ones from the current task + * + * Careful.. There are problems with IBM-designed IRQ13 behaviour. + * Don't touch unless you *really* know how it works. + * + * Must be called with kernel preemption disabled (in this case, + * local interrupts are disabled at the call-site in entry.S). + */ +asmlinkage void math_state_restore(void) +{ + struct thread_info *thread = current_thread_info(); + struct task_struct *tsk = thread->task; + + clts(); /* Allow maths ops (or we recurse) */ + if (!tsk_used_math(tsk)) + init_fpu(tsk); + restore_fpu(tsk); + thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */ + tsk->fpu_counter++; +} +EXPORT_SYMBOL_GPL(math_state_restore); + +#ifndef CONFIG_MATH_EMULATION + +asmlinkage void math_emulate(long arg) +{ + printk(KERN_EMERG "math-emulation not enabled and no coprocessor found.\n"); + printk(KERN_EMERG "killing %s.\n",current->comm); + force_sig(SIGFPE,current); + schedule(); +} + +#endif /* CONFIG_MATH_EMULATION */ + +#ifdef CONFIG_X86_F00F_BUG +void __init trap_init_f00f_bug(void) +{ + __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO); + + /* + * Update the IDT descriptor and reload the IDT so that + * it uses the read-only mapped virtual address. + */ + idt_descr.address = fix_to_virt(FIX_F00F_IDT); + load_idt(&idt_descr); +} +#endif + +/* + * This needs to use 'idt_table' rather than 'idt', and + * thus use the _nonmapped_ version of the IDT, as the + * Pentium F0 0F bugfix can have resulted in the mapped + * IDT being write-protected. + */ +void set_intr_gate(unsigned int n, void *addr) +{ + _set_gate(n, DESCTYPE_INT, addr, __KERNEL_CS); +} + +/* + * This routine sets up an interrupt gate at directory privilege level 3. + */ +static inline void set_system_intr_gate(unsigned int n, void *addr) +{ + _set_gate(n, DESCTYPE_INT | DESCTYPE_DPL3, addr, __KERNEL_CS); +} + +static void __init set_trap_gate(unsigned int n, void *addr) +{ + _set_gate(n, DESCTYPE_TRAP, addr, __KERNEL_CS); +} + +static void __init set_system_gate(unsigned int n, void *addr) +{ + _set_gate(n, DESCTYPE_TRAP | DESCTYPE_DPL3, addr, __KERNEL_CS); +} + +static void __init set_task_gate(unsigned int n, unsigned int gdt_entry) +{ + _set_gate(n, DESCTYPE_TASK, (void *)0, (gdt_entry<<3)); +} + + +void __init trap_init(void) +{ +#ifdef CONFIG_EISA + void __iomem *p = ioremap(0x0FFFD9, 4); + if (readl(p) == 'E'+('I'<<8)+('S'<<16)+('A'<<24)) { + EISA_bus = 1; + } + iounmap(p); +#endif + +#ifdef CONFIG_X86_LOCAL_APIC + init_apic_mappings(); +#endif + + set_trap_gate(0,÷_error); + set_intr_gate(1,&debug); + set_intr_gate(2,&nmi); + set_system_intr_gate(3, &int3); /* int3/4 can be called from all */ + set_system_gate(4,&overflow); + set_trap_gate(5,&bounds); + set_trap_gate(6,&invalid_op); + set_trap_gate(7,&device_not_available); + set_task_gate(8,GDT_ENTRY_DOUBLEFAULT_TSS); + set_trap_gate(9,&coprocessor_segment_overrun); + set_trap_gate(10,&invalid_TSS); + set_trap_gate(11,&segment_not_present); + set_trap_gate(12,&stack_segment); + set_trap_gate(13,&general_protection); + set_intr_gate(14,&page_fault); + set_trap_gate(15,&spurious_interrupt_bug); + set_trap_gate(16,&coprocessor_error); + set_trap_gate(17,&alignment_check); +#ifdef CONFIG_X86_MCE + set_trap_gate(18,&machine_check); +#endif + set_trap_gate(19,&simd_coprocessor_error); + + if (cpu_has_fxsr) { + /* + * Verify that the FXSAVE/FXRSTOR data will be 16-byte aligned. + * Generates a compile-time "error: zero width for bit-field" if + * the alignment is wrong. + */ + struct fxsrAlignAssert { + int _:!(offsetof(struct task_struct, + thread.i387.fxsave) & 15); + }; + + printk(KERN_INFO "Enabling fast FPU save and restore... "); + set_in_cr4(X86_CR4_OSFXSR); + printk("done.\n"); + } + if (cpu_has_xmm) { + printk(KERN_INFO "Enabling unmasked SIMD FPU exception " + "support... "); + set_in_cr4(X86_CR4_OSXMMEXCPT); + printk("done.\n"); + } + + set_system_gate(SYSCALL_VECTOR,&system_call); + + /* + * Should be a barrier for any external CPU state. + */ + cpu_init(); + + trap_init_hook(); +} + +static int __init kstack_setup(char *s) +{ + kstack_depth_to_print = simple_strtoul(s, NULL, 0); + return 1; +} +__setup("kstack=", kstack_setup); + +static int __init code_bytes_setup(char *s) +{ + code_bytes = simple_strtoul(s, NULL, 0); + if (code_bytes > 8192) + code_bytes = 8192; + + return 1; +} +__setup("code_bytes=", code_bytes_setup); diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c new file mode 100644 index 000000000000..03888420775d --- /dev/null +++ b/arch/x86/kernel/traps_64.c @@ -0,0 +1,1138 @@ +/* + * linux/arch/x86-64/traps.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs + * + * Pentium III FXSR, SSE support + * Gareth Hughes <gareth@valinux.com>, May 2000 + */ + +/* + * 'Traps.c' handles hardware traps and faults after we have saved some + * state in 'entry.S'. + */ +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/kallsyms.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/nmi.h> +#include <linux/kprobes.h> +#include <linux/kexec.h> +#include <linux/unwind.h> +#include <linux/uaccess.h> +#include <linux/bug.h> +#include <linux/kdebug.h> + +#if defined(CONFIG_EDAC) +#include <linux/edac.h> +#endif + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/atomic.h> +#include <asm/debugreg.h> +#include <asm/desc.h> +#include <asm/i387.h> +#include <asm/processor.h> +#include <asm/unwind.h> +#include <asm/smp.h> +#include <asm/pgalloc.h> +#include <asm/pda.h> +#include <asm/proto.h> +#include <asm/nmi.h> +#include <asm/stacktrace.h> + +asmlinkage void divide_error(void); +asmlinkage void debug(void); +asmlinkage void nmi(void); +asmlinkage void int3(void); +asmlinkage void overflow(void); +asmlinkage void bounds(void); +asmlinkage void invalid_op(void); +asmlinkage void device_not_available(void); +asmlinkage void double_fault(void); +asmlinkage void coprocessor_segment_overrun(void); +asmlinkage void invalid_TSS(void); +asmlinkage void segment_not_present(void); +asmlinkage void stack_segment(void); +asmlinkage void general_protection(void); +asmlinkage void page_fault(void); +asmlinkage void coprocessor_error(void); +asmlinkage void simd_coprocessor_error(void); +asmlinkage void reserved(void); +asmlinkage void alignment_check(void); +asmlinkage void machine_check(void); +asmlinkage void spurious_interrupt_bug(void); + +static inline void conditional_sti(struct pt_regs *regs) +{ + if (regs->eflags & X86_EFLAGS_IF) + local_irq_enable(); +} + +static inline void preempt_conditional_sti(struct pt_regs *regs) +{ + preempt_disable(); + if (regs->eflags & X86_EFLAGS_IF) + local_irq_enable(); +} + +static inline void preempt_conditional_cli(struct pt_regs *regs) +{ + if (regs->eflags & X86_EFLAGS_IF) + local_irq_disable(); + /* Make sure to not schedule here because we could be running + on an exception stack. */ + preempt_enable_no_resched(); +} + +int kstack_depth_to_print = 12; + +#ifdef CONFIG_KALLSYMS +void printk_address(unsigned long address) +{ + unsigned long offset = 0, symsize; + const char *symname; + char *modname; + char *delim = ":"; + char namebuf[128]; + + symname = kallsyms_lookup(address, &symsize, &offset, + &modname, namebuf); + if (!symname) { + printk(" [<%016lx>]\n", address); + return; + } + if (!modname) + modname = delim = ""; + printk(" [<%016lx>] %s%s%s%s+0x%lx/0x%lx\n", + address, delim, modname, delim, symname, offset, symsize); +} +#else +void printk_address(unsigned long address) +{ + printk(" [<%016lx>]\n", address); +} +#endif + +static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, + unsigned *usedp, char **idp) +{ + static char ids[][8] = { + [DEBUG_STACK - 1] = "#DB", + [NMI_STACK - 1] = "NMI", + [DOUBLEFAULT_STACK - 1] = "#DF", + [STACKFAULT_STACK - 1] = "#SS", + [MCE_STACK - 1] = "#MC", +#if DEBUG_STKSZ > EXCEPTION_STKSZ + [N_EXCEPTION_STACKS ... N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]" +#endif + }; + unsigned k; + + /* + * Iterate over all exception stacks, and figure out whether + * 'stack' is in one of them: + */ + for (k = 0; k < N_EXCEPTION_STACKS; k++) { + unsigned long end = per_cpu(orig_ist, cpu).ist[k]; + /* + * Is 'stack' above this exception frame's end? + * If yes then skip to the next frame. + */ + if (stack >= end) + continue; + /* + * Is 'stack' above this exception frame's start address? + * If yes then we found the right frame. + */ + if (stack >= end - EXCEPTION_STKSZ) { + /* + * Make sure we only iterate through an exception + * stack once. If it comes up for the second time + * then there's something wrong going on - just + * break out and return NULL: + */ + if (*usedp & (1U << k)) + break; + *usedp |= 1U << k; + *idp = ids[k]; + return (unsigned long *)end; + } + /* + * If this is a debug stack, and if it has a larger size than + * the usual exception stacks, then 'stack' might still + * be within the lower portion of the debug stack: + */ +#if DEBUG_STKSZ > EXCEPTION_STKSZ + if (k == DEBUG_STACK - 1 && stack >= end - DEBUG_STKSZ) { + unsigned j = N_EXCEPTION_STACKS - 1; + + /* + * Black magic. A large debug stack is composed of + * multiple exception stack entries, which we + * iterate through now. Dont look: + */ + do { + ++j; + end -= EXCEPTION_STKSZ; + ids[j][4] = '1' + (j - N_EXCEPTION_STACKS); + } while (stack < end - EXCEPTION_STKSZ); + if (*usedp & (1U << j)) + break; + *usedp |= 1U << j; + *idp = ids[j]; + return (unsigned long *)end; + } +#endif + } + return NULL; +} + +#define MSG(txt) ops->warning(data, txt) + +/* + * x86-64 can have upto three kernel stacks: + * process stack + * interrupt stack + * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack + */ + +static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) +{ + void *t = (void *)tinfo; + return p > t && p < t + THREAD_SIZE - 3; +} + +void dump_trace(struct task_struct *tsk, struct pt_regs *regs, + unsigned long *stack, + struct stacktrace_ops *ops, void *data) +{ + const unsigned cpu = get_cpu(); + unsigned long *irqstack_end = (unsigned long*)cpu_pda(cpu)->irqstackptr; + unsigned used = 0; + struct thread_info *tinfo; + + if (!tsk) + tsk = current; + + if (!stack) { + unsigned long dummy; + stack = &dummy; + if (tsk && tsk != current) + stack = (unsigned long *)tsk->thread.rsp; + } + + /* + * Print function call entries within a stack. 'cond' is the + * "end of stackframe" condition, that the 'stack++' + * iteration will eventually trigger. + */ +#define HANDLE_STACK(cond) \ + do while (cond) { \ + unsigned long addr = *stack++; \ + /* Use unlocked access here because except for NMIs \ + we should be already protected against module unloads */ \ + if (__kernel_text_address(addr)) { \ + /* \ + * If the address is either in the text segment of the \ + * kernel, or in the region which contains vmalloc'ed \ + * memory, it *may* be the address of a calling \ + * routine; if so, print it so that someone tracing \ + * down the cause of the crash will be able to figure \ + * out the call path that was taken. \ + */ \ + ops->address(data, addr); \ + } \ + } while (0) + + /* + * Print function call entries in all stacks, starting at the + * current stack address. If the stacks consist of nested + * exceptions + */ + for (;;) { + char *id; + unsigned long *estack_end; + estack_end = in_exception_stack(cpu, (unsigned long)stack, + &used, &id); + + if (estack_end) { + if (ops->stack(data, id) < 0) + break; + HANDLE_STACK (stack < estack_end); + ops->stack(data, "<EOE>"); + /* + * We link to the next stack via the + * second-to-last pointer (index -2 to end) in the + * exception stack: + */ + stack = (unsigned long *) estack_end[-2]; + continue; + } + if (irqstack_end) { + unsigned long *irqstack; + irqstack = irqstack_end - + (IRQSTACKSIZE - 64) / sizeof(*irqstack); + + if (stack >= irqstack && stack < irqstack_end) { + if (ops->stack(data, "IRQ") < 0) + break; + HANDLE_STACK (stack < irqstack_end); + /* + * We link to the next stack (which would be + * the process stack normally) the last + * pointer (index -1 to end) in the IRQ stack: + */ + stack = (unsigned long *) (irqstack_end[-1]); + irqstack_end = NULL; + ops->stack(data, "EOI"); + continue; + } + } + break; + } + + /* + * This handles the process stack: + */ + tinfo = task_thread_info(tsk); + HANDLE_STACK (valid_stack_ptr(tinfo, stack)); +#undef HANDLE_STACK + put_cpu(); +} +EXPORT_SYMBOL(dump_trace); + +static void +print_trace_warning_symbol(void *data, char *msg, unsigned long symbol) +{ + print_symbol(msg, symbol); + printk("\n"); +} + +static void print_trace_warning(void *data, char *msg) +{ + printk("%s\n", msg); +} + +static int print_trace_stack(void *data, char *name) +{ + printk(" <%s> ", name); + return 0; +} + +static void print_trace_address(void *data, unsigned long addr) +{ + touch_nmi_watchdog(); + printk_address(addr); +} + +static struct stacktrace_ops print_trace_ops = { + .warning = print_trace_warning, + .warning_symbol = print_trace_warning_symbol, + .stack = print_trace_stack, + .address = print_trace_address, +}; + +void +show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack) +{ + printk("\nCall Trace:\n"); + dump_trace(tsk, regs, stack, &print_trace_ops, NULL); + printk("\n"); +} + +static void +_show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *rsp) +{ + unsigned long *stack; + int i; + const int cpu = smp_processor_id(); + unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr); + unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE); + + // debugging aid: "show_stack(NULL, NULL);" prints the + // back trace for this cpu. + + if (rsp == NULL) { + if (tsk) + rsp = (unsigned long *)tsk->thread.rsp; + else + rsp = (unsigned long *)&rsp; + } + + stack = rsp; + for(i=0; i < kstack_depth_to_print; i++) { + if (stack >= irqstack && stack <= irqstack_end) { + if (stack == irqstack_end) { + stack = (unsigned long *) (irqstack_end[-1]); + printk(" <EOI> "); + } + } else { + if (((long) stack & (THREAD_SIZE-1)) == 0) + break; + } + if (i && ((i % 4) == 0)) + printk("\n"); + printk(" %016lx", *stack++); + touch_nmi_watchdog(); + } + show_trace(tsk, regs, rsp); +} + +void show_stack(struct task_struct *tsk, unsigned long * rsp) +{ + _show_stack(tsk, NULL, rsp); +} + +/* + * The architecture-independent dump_stack generator + */ +void dump_stack(void) +{ + unsigned long dummy; + show_trace(NULL, NULL, &dummy); +} + +EXPORT_SYMBOL(dump_stack); + +void show_registers(struct pt_regs *regs) +{ + int i; + int in_kernel = !user_mode(regs); + unsigned long rsp; + const int cpu = smp_processor_id(); + struct task_struct *cur = cpu_pda(cpu)->pcurrent; + + rsp = regs->rsp; + printk("CPU %d ", cpu); + __show_regs(regs); + printk("Process %s (pid: %d, threadinfo %p, task %p)\n", + cur->comm, cur->pid, task_thread_info(cur), cur); + + /* + * When in-kernel, we also print out the stack and code at the + * time of the fault.. + */ + if (in_kernel) { + printk("Stack: "); + _show_stack(NULL, regs, (unsigned long*)rsp); + + printk("\nCode: "); + if (regs->rip < PAGE_OFFSET) + goto bad; + + for (i=0; i<20; i++) { + unsigned char c; + if (__get_user(c, &((unsigned char*)regs->rip)[i])) { +bad: + printk(" Bad RIP value."); + break; + } + printk("%02x ", c); + } + } + printk("\n"); +} + +int is_valid_bugaddr(unsigned long rip) +{ + unsigned short ud2; + + if (__copy_from_user(&ud2, (const void __user *) rip, sizeof(ud2))) + return 0; + + return ud2 == 0x0b0f; +} + +#ifdef CONFIG_BUG +void out_of_line_bug(void) +{ + BUG(); +} +EXPORT_SYMBOL(out_of_line_bug); +#endif + +static DEFINE_SPINLOCK(die_lock); +static int die_owner = -1; +static unsigned int die_nest_count; + +unsigned __kprobes long oops_begin(void) +{ + int cpu; + unsigned long flags; + + oops_enter(); + + /* racy, but better than risking deadlock. */ + local_irq_save(flags); + cpu = smp_processor_id(); + if (!spin_trylock(&die_lock)) { + if (cpu == die_owner) + /* nested oops. should stop eventually */; + else + spin_lock(&die_lock); + } + die_nest_count++; + die_owner = cpu; + console_verbose(); + bust_spinlocks(1); + return flags; +} + +void __kprobes oops_end(unsigned long flags) +{ + die_owner = -1; + bust_spinlocks(0); + die_nest_count--; + if (die_nest_count) + /* We still own the lock */ + local_irq_restore(flags); + else + /* Nest count reaches zero, release the lock. */ + spin_unlock_irqrestore(&die_lock, flags); + if (panic_on_oops) + panic("Fatal exception"); + oops_exit(); +} + +void __kprobes __die(const char * str, struct pt_regs * regs, long err) +{ + static int die_counter; + printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff,++die_counter); +#ifdef CONFIG_PREEMPT + printk("PREEMPT "); +#endif +#ifdef CONFIG_SMP + printk("SMP "); +#endif +#ifdef CONFIG_DEBUG_PAGEALLOC + printk("DEBUG_PAGEALLOC"); +#endif + printk("\n"); + notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV); + show_registers(regs); + add_taint(TAINT_DIE); + /* Executive summary in case the oops scrolled away */ + printk(KERN_ALERT "RIP "); + printk_address(regs->rip); + printk(" RSP <%016lx>\n", regs->rsp); + if (kexec_should_crash(current)) + crash_kexec(regs); +} + +void die(const char * str, struct pt_regs * regs, long err) +{ + unsigned long flags = oops_begin(); + + if (!user_mode(regs)) + report_bug(regs->rip, regs); + + __die(str, regs, err); + oops_end(flags); + do_exit(SIGSEGV); +} + +void __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic) +{ + unsigned long flags = oops_begin(); + + /* + * We are in trouble anyway, lets at least try + * to get a message out. + */ + printk(str, smp_processor_id()); + show_registers(regs); + if (kexec_should_crash(current)) + crash_kexec(regs); + if (do_panic || panic_on_oops) + panic("Non maskable interrupt"); + oops_end(flags); + nmi_exit(); + local_irq_enable(); + do_exit(SIGSEGV); +} + +static void __kprobes do_trap(int trapnr, int signr, char *str, + struct pt_regs * regs, long error_code, + siginfo_t *info) +{ + struct task_struct *tsk = current; + + if (user_mode(regs)) { + /* + * We want error_code and trap_no set for userspace + * faults and kernelspace faults which result in + * die(), but not kernelspace faults which are fixed + * up. die() gives the process no chance to handle + * the signal and notice the kernel fault information, + * so that won't result in polluting the information + * about previously queued, but not yet delivered, + * faults. See also do_general_protection below. + */ + tsk->thread.error_code = error_code; + tsk->thread.trap_no = trapnr; + + if (show_unhandled_signals && unhandled_signal(tsk, signr) && + printk_ratelimit()) + printk(KERN_INFO + "%s[%d] trap %s rip:%lx rsp:%lx error:%lx\n", + tsk->comm, tsk->pid, str, + regs->rip, regs->rsp, error_code); + + if (info) + force_sig_info(signr, info, tsk); + else + force_sig(signr, tsk); + return; + } + + + /* kernel trap */ + { + const struct exception_table_entry *fixup; + fixup = search_exception_tables(regs->rip); + if (fixup) + regs->rip = fixup->fixup; + else { + tsk->thread.error_code = error_code; + tsk->thread.trap_no = trapnr; + die(str, regs, error_code); + } + return; + } +} + +#define DO_ERROR(trapnr, signr, str, name) \ +asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ +{ \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + conditional_sti(regs); \ + do_trap(trapnr, signr, str, regs, error_code, NULL); \ +} + +#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ +asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ +{ \ + siginfo_t info; \ + info.si_signo = signr; \ + info.si_errno = 0; \ + info.si_code = sicode; \ + info.si_addr = (void __user *)siaddr; \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + conditional_sti(regs); \ + do_trap(trapnr, signr, str, regs, error_code, &info); \ +} + +DO_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->rip) +DO_ERROR( 4, SIGSEGV, "overflow", overflow) +DO_ERROR( 5, SIGSEGV, "bounds", bounds) +DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->rip) +DO_ERROR( 7, SIGSEGV, "device not available", device_not_available) +DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) +DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) +DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) +DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) +DO_ERROR(18, SIGSEGV, "reserved", reserved) + +/* Runs on IST stack */ +asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) +{ + if (notify_die(DIE_TRAP, "stack segment", regs, error_code, + 12, SIGBUS) == NOTIFY_STOP) + return; + preempt_conditional_sti(regs); + do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL); + preempt_conditional_cli(regs); +} + +asmlinkage void do_double_fault(struct pt_regs * regs, long error_code) +{ + static const char str[] = "double fault"; + struct task_struct *tsk = current; + + /* Return not checked because double check cannot be ignored */ + notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV); + + tsk->thread.error_code = error_code; + tsk->thread.trap_no = 8; + + /* This is always a kernel trap and never fixable (and thus must + never return). */ + for (;;) + die(str, regs, error_code); +} + +asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, + long error_code) +{ + struct task_struct *tsk = current; + + conditional_sti(regs); + + if (user_mode(regs)) { + tsk->thread.error_code = error_code; + tsk->thread.trap_no = 13; + + if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && + printk_ratelimit()) + printk(KERN_INFO + "%s[%d] general protection rip:%lx rsp:%lx error:%lx\n", + tsk->comm, tsk->pid, + regs->rip, regs->rsp, error_code); + + force_sig(SIGSEGV, tsk); + return; + } + + /* kernel gp */ + { + const struct exception_table_entry *fixup; + fixup = search_exception_tables(regs->rip); + if (fixup) { + regs->rip = fixup->fixup; + return; + } + + tsk->thread.error_code = error_code; + tsk->thread.trap_no = 13; + if (notify_die(DIE_GPF, "general protection fault", regs, + error_code, 13, SIGSEGV) == NOTIFY_STOP) + return; + die("general protection fault", regs, error_code); + } +} + +static __kprobes void +mem_parity_error(unsigned char reason, struct pt_regs * regs) +{ + printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", + reason); + printk(KERN_EMERG "You have some hardware problem, likely on the PCI bus.\n"); + +#if defined(CONFIG_EDAC) + if(edac_handler_set()) { + edac_atomic_assert_error(); + return; + } +#endif + + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); + + /* Clear and disable the memory parity error line. */ + reason = (reason & 0xf) | 4; + outb(reason, 0x61); +} + +static __kprobes void +io_check_error(unsigned char reason, struct pt_regs * regs) +{ + printk("NMI: IOCK error (debug interrupt?)\n"); + show_registers(regs); + + /* Re-enable the IOCK line, wait for a few seconds */ + reason = (reason & 0xf) | 8; + outb(reason, 0x61); + mdelay(2000); + reason &= ~8; + outb(reason, 0x61); +} + +static __kprobes void +unknown_nmi_error(unsigned char reason, struct pt_regs * regs) +{ + printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", + reason); + printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n"); + + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); +} + +/* Runs on IST stack. This code must keep interrupts off all the time. + Nested NMIs are prevented by the CPU. */ +asmlinkage __kprobes void default_do_nmi(struct pt_regs *regs) +{ + unsigned char reason = 0; + int cpu; + + cpu = smp_processor_id(); + + /* Only the BSP gets external NMIs from the system. */ + if (!cpu) + reason = get_nmi_reason(); + + if (!(reason & 0xc0)) { + if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) + return; + /* + * Ok, so this is none of the documented NMI sources, + * so it must be the NMI watchdog. + */ + if (nmi_watchdog_tick(regs,reason)) + return; + if (!do_nmi_callback(regs,cpu)) + unknown_nmi_error(reason, regs); + + return; + } + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) + return; + + /* AK: following checks seem to be broken on modern chipsets. FIXME */ + + if (reason & 0x80) + mem_parity_error(reason, regs); + if (reason & 0x40) + io_check_error(reason, regs); +} + +/* runs on IST stack. */ +asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code) +{ + if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) { + return; + } + preempt_conditional_sti(regs); + do_trap(3, SIGTRAP, "int3", regs, error_code, NULL); + preempt_conditional_cli(regs); +} + +/* Help handler running on IST stack to switch back to user stack + for scheduling or signal handling. The actual stack switch is done in + entry.S */ +asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs) +{ + struct pt_regs *regs = eregs; + /* Did already sync */ + if (eregs == (struct pt_regs *)eregs->rsp) + ; + /* Exception from user space */ + else if (user_mode(eregs)) + regs = task_pt_regs(current); + /* Exception from kernel and interrupts are enabled. Move to + kernel process stack. */ + else if (eregs->eflags & X86_EFLAGS_IF) + regs = (struct pt_regs *)(eregs->rsp -= sizeof(struct pt_regs)); + if (eregs != regs) + *regs = *eregs; + return regs; +} + +/* runs on IST stack. */ +asmlinkage void __kprobes do_debug(struct pt_regs * regs, + unsigned long error_code) +{ + unsigned long condition; + struct task_struct *tsk = current; + siginfo_t info; + + get_debugreg(condition, 6); + + if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, + SIGTRAP) == NOTIFY_STOP) + return; + + preempt_conditional_sti(regs); + + /* Mask out spurious debug traps due to lazy DR7 setting */ + if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) { + if (!tsk->thread.debugreg7) { + goto clear_dr7; + } + } + + tsk->thread.debugreg6 = condition; + + /* Mask out spurious TF errors due to lazy TF clearing */ + if (condition & DR_STEP) { + /* + * The TF error should be masked out only if the current + * process is not traced and if the TRAP flag has been set + * previously by a tracing process (condition detected by + * the PT_DTRACE flag); remember that the i386 TRAP flag + * can be modified by the process itself in user mode, + * allowing programs to debug themselves without the ptrace() + * interface. + */ + if (!user_mode(regs)) + goto clear_TF_reenable; + /* + * Was the TF flag set by a debugger? If so, clear it now, + * so that register information is correct. + */ + if (tsk->ptrace & PT_DTRACE) { + regs->eflags &= ~TF_MASK; + tsk->ptrace &= ~PT_DTRACE; + } + } + + /* Ok, finally something we can handle */ + tsk->thread.trap_no = 1; + tsk->thread.error_code = error_code; + info.si_signo = SIGTRAP; + info.si_errno = 0; + info.si_code = TRAP_BRKPT; + info.si_addr = user_mode(regs) ? (void __user *)regs->rip : NULL; + force_sig_info(SIGTRAP, &info, tsk); + +clear_dr7: + set_debugreg(0UL, 7); + preempt_conditional_cli(regs); + return; + +clear_TF_reenable: + set_tsk_thread_flag(tsk, TIF_SINGLESTEP); + regs->eflags &= ~TF_MASK; + preempt_conditional_cli(regs); +} + +static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr) +{ + const struct exception_table_entry *fixup; + fixup = search_exception_tables(regs->rip); + if (fixup) { + regs->rip = fixup->fixup; + return 1; + } + notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE); + /* Illegal floating point operation in the kernel */ + current->thread.trap_no = trapnr; + die(str, regs, 0); + return 0; +} + +/* + * Note that we play around with the 'TS' bit in an attempt to get + * the correct behaviour even in the presence of the asynchronous + * IRQ13 behaviour + */ +asmlinkage void do_coprocessor_error(struct pt_regs *regs) +{ + void __user *rip = (void __user *)(regs->rip); + struct task_struct * task; + siginfo_t info; + unsigned short cwd, swd; + + conditional_sti(regs); + if (!user_mode(regs) && + kernel_math_error(regs, "kernel x87 math error", 16)) + return; + + /* + * Save the info for the exception handler and clear the error. + */ + task = current; + save_init_fpu(task); + task->thread.trap_no = 16; + task->thread.error_code = 0; + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = __SI_FAULT; + info.si_addr = rip; + /* + * (~cwd & swd) will mask out exceptions that are not set to unmasked + * status. 0x3f is the exception bits in these regs, 0x200 is the + * C1 reg you need in case of a stack fault, 0x040 is the stack + * fault bit. We should only be taking one exception at a time, + * so if this combination doesn't produce any single exception, + * then we have a bad program that isn't synchronizing its FPU usage + * and it will suffer the consequences since we won't be able to + * fully reproduce the context of the exception + */ + cwd = get_fpu_cwd(task); + swd = get_fpu_swd(task); + switch (swd & ~cwd & 0x3f) { + case 0x000: + default: + break; + case 0x001: /* Invalid Op */ + /* + * swd & 0x240 == 0x040: Stack Underflow + * swd & 0x240 == 0x240: Stack Overflow + * User must clear the SF bit (0x40) if set + */ + info.si_code = FPE_FLTINV; + break; + case 0x002: /* Denormalize */ + case 0x010: /* Underflow */ + info.si_code = FPE_FLTUND; + break; + case 0x004: /* Zero Divide */ + info.si_code = FPE_FLTDIV; + break; + case 0x008: /* Overflow */ + info.si_code = FPE_FLTOVF; + break; + case 0x020: /* Precision */ + info.si_code = FPE_FLTRES; + break; + } + force_sig_info(SIGFPE, &info, task); +} + +asmlinkage void bad_intr(void) +{ + printk("bad interrupt"); +} + +asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs) +{ + void __user *rip = (void __user *)(regs->rip); + struct task_struct * task; + siginfo_t info; + unsigned short mxcsr; + + conditional_sti(regs); + if (!user_mode(regs) && + kernel_math_error(regs, "kernel simd math error", 19)) + return; + + /* + * Save the info for the exception handler and clear the error. + */ + task = current; + save_init_fpu(task); + task->thread.trap_no = 19; + task->thread.error_code = 0; + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = __SI_FAULT; + info.si_addr = rip; + /* + * The SIMD FPU exceptions are handled a little differently, as there + * is only a single status/control register. Thus, to determine which + * unmasked exception was caught we must mask the exception mask bits + * at 0x1f80, and then use these to mask the exception bits at 0x3f. + */ + mxcsr = get_fpu_mxcsr(task); + switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) { + case 0x000: + default: + break; + case 0x001: /* Invalid Op */ + info.si_code = FPE_FLTINV; + break; + case 0x002: /* Denormalize */ + case 0x010: /* Underflow */ + info.si_code = FPE_FLTUND; + break; + case 0x004: /* Zero Divide */ + info.si_code = FPE_FLTDIV; + break; + case 0x008: /* Overflow */ + info.si_code = FPE_FLTOVF; + break; + case 0x020: /* Precision */ + info.si_code = FPE_FLTRES; + break; + } + force_sig_info(SIGFPE, &info, task); +} + +asmlinkage void do_spurious_interrupt_bug(struct pt_regs * regs) +{ +} + +asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void) +{ +} + +asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void) +{ +} + +/* + * 'math_state_restore()' saves the current math information in the + * old math state array, and gets the new ones from the current task + * + * Careful.. There are problems with IBM-designed IRQ13 behaviour. + * Don't touch unless you *really* know how it works. + */ +asmlinkage void math_state_restore(void) +{ + struct task_struct *me = current; + clts(); /* Allow maths ops (or we recurse) */ + + if (!used_math()) + init_fpu(me); + restore_fpu_checking(&me->thread.i387.fxsave); + task_thread_info(me)->status |= TS_USEDFPU; + me->fpu_counter++; +} + +void __init trap_init(void) +{ + set_intr_gate(0,÷_error); + set_intr_gate_ist(1,&debug,DEBUG_STACK); + set_intr_gate_ist(2,&nmi,NMI_STACK); + set_system_gate_ist(3,&int3,DEBUG_STACK); /* int3 can be called from all */ + set_system_gate(4,&overflow); /* int4 can be called from all */ + set_intr_gate(5,&bounds); + set_intr_gate(6,&invalid_op); + set_intr_gate(7,&device_not_available); + set_intr_gate_ist(8,&double_fault, DOUBLEFAULT_STACK); + set_intr_gate(9,&coprocessor_segment_overrun); + set_intr_gate(10,&invalid_TSS); + set_intr_gate(11,&segment_not_present); + set_intr_gate_ist(12,&stack_segment,STACKFAULT_STACK); + set_intr_gate(13,&general_protection); + set_intr_gate(14,&page_fault); + set_intr_gate(15,&spurious_interrupt_bug); + set_intr_gate(16,&coprocessor_error); + set_intr_gate(17,&alignment_check); +#ifdef CONFIG_X86_MCE + set_intr_gate_ist(18,&machine_check, MCE_STACK); +#endif + set_intr_gate(19,&simd_coprocessor_error); + +#ifdef CONFIG_IA32_EMULATION + set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall); +#endif + + /* + * Should be a barrier for any external CPU state. + */ + cpu_init(); +} + + +static int __init oops_setup(char *s) +{ + if (!s) + return -EINVAL; + if (!strcmp(s, "panic")) + panic_on_oops = 1; + return 0; +} +early_param("oops", oops_setup); + +static int __init kstack_setup(char *s) +{ + if (!s) + return -EINVAL; + kstack_depth_to_print = simple_strtoul(s,NULL,0); + return 0; +} +early_param("kstack", kstack_setup); diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c new file mode 100644 index 000000000000..3ed0ae8c918d --- /dev/null +++ b/arch/x86/kernel/tsc_32.c @@ -0,0 +1,413 @@ +/* + * This code largely moved from arch/i386/kernel/timer/timer_tsc.c + * which was originally moved from arch/i386/kernel/time.c. + * See comments there for proper credits. + */ + +#include <linux/sched.h> +#include <linux/clocksource.h> +#include <linux/workqueue.h> +#include <linux/cpufreq.h> +#include <linux/jiffies.h> +#include <linux/init.h> +#include <linux/dmi.h> + +#include <asm/delay.h> +#include <asm/tsc.h> +#include <asm/io.h> +#include <asm/timer.h> + +#include "mach_timer.h" + +static int tsc_enabled; + +/* + * On some systems the TSC frequency does not + * change with the cpu frequency. So we need + * an extra value to store the TSC freq + */ +unsigned int tsc_khz; +EXPORT_SYMBOL_GPL(tsc_khz); + +int tsc_disable; + +#ifdef CONFIG_X86_TSC +static int __init tsc_setup(char *str) +{ + printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " + "cannot disable TSC.\n"); + return 1; +} +#else +/* + * disable flag for tsc. Takes effect by clearing the TSC cpu flag + * in cpu/common.c + */ +static int __init tsc_setup(char *str) +{ + tsc_disable = 1; + + return 1; +} +#endif + +__setup("notsc", tsc_setup); + +/* + * code to mark and check if the TSC is unstable + * due to cpufreq or due to unsynced TSCs + */ +static int tsc_unstable; + +int check_tsc_unstable(void) +{ + return tsc_unstable; +} +EXPORT_SYMBOL_GPL(check_tsc_unstable); + +/* Accellerators for sched_clock() + * convert from cycles(64bits) => nanoseconds (64bits) + * basic equation: + * ns = cycles / (freq / ns_per_sec) + * ns = cycles * (ns_per_sec / freq) + * ns = cycles * (10^9 / (cpu_khz * 10^3)) + * ns = cycles * (10^6 / cpu_khz) + * + * Then we use scaling math (suggested by george@mvista.com) to get: + * ns = cycles * (10^6 * SC / cpu_khz) / SC + * ns = cycles * cyc2ns_scale / SC + * + * And since SC is a constant power of two, we can convert the div + * into a shift. + * + * We can use khz divisor instead of mhz to keep a better percision, since + * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. + * (mathieu.desnoyers@polymtl.ca) + * + * -johnstul@us.ibm.com "math is hard, lets go shopping!" + */ +unsigned long cyc2ns_scale __read_mostly; + +#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */ + +static inline void set_cyc2ns_scale(unsigned long cpu_khz) +{ + cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz; +} + +/* + * Scheduler clock - returns current time in nanosec units. + */ +unsigned long long native_sched_clock(void) +{ + unsigned long long this_offset; + + /* + * Fall back to jiffies if there's no TSC available: + * ( But note that we still use it if the TSC is marked + * unstable. We do this because unlike Time Of Day, + * the scheduler clock tolerates small errors and it's + * very important for it to be as fast as the platform + * can achive it. ) + */ + if (unlikely(!tsc_enabled && !tsc_unstable)) + /* No locking but a rare wrong value is not a big deal: */ + return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); + + /* read the Time Stamp Counter: */ + rdtscll(this_offset); + + /* return the value in ns */ + return cycles_2_ns(this_offset); +} + +/* We need to define a real function for sched_clock, to override the + weak default version */ +#ifdef CONFIG_PARAVIRT +unsigned long long sched_clock(void) +{ + return paravirt_sched_clock(); +} +#else +unsigned long long sched_clock(void) + __attribute__((alias("native_sched_clock"))); +#endif + +unsigned long native_calculate_cpu_khz(void) +{ + unsigned long long start, end; + unsigned long count; + u64 delta64; + int i; + unsigned long flags; + + local_irq_save(flags); + + /* run 3 times to ensure the cache is warm */ + for (i = 0; i < 3; i++) { + mach_prepare_counter(); + rdtscll(start); + mach_countup(&count); + rdtscll(end); + } + /* + * Error: ECTCNEVERSET + * The CTC wasn't reliable: we got a hit on the very first read, + * or the CPU was so fast/slow that the quotient wouldn't fit in + * 32 bits.. + */ + if (count <= 1) + goto err; + + delta64 = end - start; + + /* cpu freq too fast: */ + if (delta64 > (1ULL<<32)) + goto err; + + /* cpu freq too slow: */ + if (delta64 <= CALIBRATE_TIME_MSEC) + goto err; + + delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */ + do_div(delta64,CALIBRATE_TIME_MSEC); + + local_irq_restore(flags); + return (unsigned long)delta64; +err: + local_irq_restore(flags); + return 0; +} + +int recalibrate_cpu_khz(void) +{ +#ifndef CONFIG_SMP + unsigned long cpu_khz_old = cpu_khz; + + if (cpu_has_tsc) { + cpu_khz = calculate_cpu_khz(); + tsc_khz = cpu_khz; + cpu_data[0].loops_per_jiffy = + cpufreq_scale(cpu_data[0].loops_per_jiffy, + cpu_khz_old, cpu_khz); + return 0; + } else + return -ENODEV; +#else + return -ENODEV; +#endif +} + +EXPORT_SYMBOL(recalibrate_cpu_khz); + +#ifdef CONFIG_CPU_FREQ + +/* + * if the CPU frequency is scaled, TSC-based delays will need a different + * loops_per_jiffy value to function properly. + */ +static unsigned int ref_freq = 0; +static unsigned long loops_per_jiffy_ref = 0; +static unsigned long cpu_khz_ref = 0; + +static int +time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + + if (!ref_freq) { + if (!freq->old){ + ref_freq = freq->new; + return 0; + } + ref_freq = freq->old; + loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy; + cpu_khz_ref = cpu_khz; + } + + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE)) { + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) + cpu_data[freq->cpu].loops_per_jiffy = + cpufreq_scale(loops_per_jiffy_ref, + ref_freq, freq->new); + + if (cpu_khz) { + + if (num_online_cpus() == 1) + cpu_khz = cpufreq_scale(cpu_khz_ref, + ref_freq, freq->new); + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { + tsc_khz = cpu_khz; + set_cyc2ns_scale(cpu_khz); + /* + * TSC based sched_clock turns + * to junk w/ cpufreq + */ + mark_tsc_unstable("cpufreq changes"); + } + } + } + + return 0; +} + +static struct notifier_block time_cpufreq_notifier_block = { + .notifier_call = time_cpufreq_notifier +}; + +static int __init cpufreq_tsc(void) +{ + return cpufreq_register_notifier(&time_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); +} +core_initcall(cpufreq_tsc); + +#endif + +/* clock source code */ + +static unsigned long current_tsc_khz = 0; + +static cycle_t read_tsc(void) +{ + cycle_t ret; + + rdtscll(ret); + + return ret; +} + +static struct clocksource clocksource_tsc = { + .name = "tsc", + .rating = 300, + .read = read_tsc, + .mask = CLOCKSOURCE_MASK(64), + .mult = 0, /* to be set */ + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS | + CLOCK_SOURCE_MUST_VERIFY, +}; + +void mark_tsc_unstable(char *reason) +{ + if (!tsc_unstable) { + tsc_unstable = 1; + tsc_enabled = 0; + printk("Marking TSC unstable due to: %s.\n", reason); + /* Can be called before registration */ + if (clocksource_tsc.mult) + clocksource_change_rating(&clocksource_tsc, 0); + else + clocksource_tsc.rating = 0; + } +} +EXPORT_SYMBOL_GPL(mark_tsc_unstable); + +static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", + d->ident); + tsc_unstable = 1; + return 0; +} + +/* List of systems that have known TSC problems */ +static struct dmi_system_id __initdata bad_tsc_dmi_table[] = { + { + .callback = dmi_mark_tsc_unstable, + .ident = "IBM Thinkpad 380XD", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), + DMI_MATCH(DMI_BOARD_NAME, "2635FA0"), + }, + }, + {} +}; + +/* + * Make an educated guess if the TSC is trustworthy and synchronized + * over all CPUs. + */ +__cpuinit int unsynchronized_tsc(void) +{ + if (!cpu_has_tsc || tsc_unstable) + return 1; + /* + * Intel systems are normally all synchronized. + * Exceptions must mark TSC as unstable: + */ + if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) { + /* assume multi socket systems are not synchronized: */ + if (num_possible_cpus() > 1) + tsc_unstable = 1; + } + return tsc_unstable; +} + +/* + * Geode_LX - the OLPC CPU has a possibly a very reliable TSC + */ +#ifdef CONFIG_MGEODE_LX +/* RTSC counts during suspend */ +#define RTSC_SUSP 0x100 + +static void __init check_geode_tsc_reliable(void) +{ + unsigned long val; + + rdmsrl(MSR_GEODE_BUSCONT_CONF0, val); + if ((val & RTSC_SUSP)) + clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; +} +#else +static inline void check_geode_tsc_reliable(void) { } +#endif + + +void __init tsc_init(void) +{ + if (!cpu_has_tsc || tsc_disable) + goto out_no_tsc; + + cpu_khz = calculate_cpu_khz(); + tsc_khz = cpu_khz; + + if (!cpu_khz) + goto out_no_tsc; + + printk("Detected %lu.%03lu MHz processor.\n", + (unsigned long)cpu_khz / 1000, + (unsigned long)cpu_khz % 1000); + + set_cyc2ns_scale(cpu_khz); + use_tsc_delay(); + + /* Check and install the TSC clocksource */ + dmi_check_system(bad_tsc_dmi_table); + + unsynchronized_tsc(); + check_geode_tsc_reliable(); + current_tsc_khz = tsc_khz; + clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, + clocksource_tsc.shift); + /* lower the rating if we already know its unstable: */ + if (check_tsc_unstable()) { + clocksource_tsc.rating = 0; + clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; + } else + tsc_enabled = 1; + + clocksource_register(&clocksource_tsc); + + return; + +out_no_tsc: + /* + * Set the tsc_disable flag if there's no TSC support, this + * makes it a fast flag for the kernel to see whether it + * should be using the TSC. + */ + tsc_disable = 1; +} diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c new file mode 100644 index 000000000000..2a59bde663f2 --- /dev/null +++ b/arch/x86/kernel/tsc_64.c @@ -0,0 +1,207 @@ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/clocksource.h> +#include <linux/time.h> +#include <linux/acpi.h> +#include <linux/cpufreq.h> + +#include <asm/timex.h> + +static int notsc __initdata = 0; + +unsigned int cpu_khz; /* TSC clocks / usec, not used here */ +EXPORT_SYMBOL(cpu_khz); +unsigned int tsc_khz; +EXPORT_SYMBOL(tsc_khz); + +static unsigned int cyc2ns_scale __read_mostly; + +void set_cyc2ns_scale(unsigned long khz) +{ + cyc2ns_scale = (NSEC_PER_MSEC << NS_SCALE) / khz; +} + +static unsigned long long cycles_2_ns(unsigned long long cyc) +{ + return (cyc * cyc2ns_scale) >> NS_SCALE; +} + +unsigned long long sched_clock(void) +{ + unsigned long a = 0; + + /* Could do CPU core sync here. Opteron can execute rdtsc speculatively, + * which means it is not completely exact and may not be monotonous + * between CPUs. But the errors should be too small to matter for + * scheduling purposes. + */ + + rdtscll(a); + return cycles_2_ns(a); +} + +static int tsc_unstable; + +inline int check_tsc_unstable(void) +{ + return tsc_unstable; +} +#ifdef CONFIG_CPU_FREQ + +/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency + * changes. + * + * RED-PEN: On SMP we assume all CPUs run with the same frequency. It's + * not that important because current Opteron setups do not support + * scaling on SMP anyroads. + * + * Should fix up last_tsc too. Currently gettimeofday in the + * first tick after the change will be slightly wrong. + */ + +static unsigned int ref_freq; +static unsigned long loops_per_jiffy_ref; +static unsigned long tsc_khz_ref; + +static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct cpufreq_freqs *freq = data; + unsigned long *lpj, dummy; + + if (cpu_has(&cpu_data[freq->cpu], X86_FEATURE_CONSTANT_TSC)) + return 0; + + lpj = &dummy; + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) +#ifdef CONFIG_SMP + lpj = &cpu_data[freq->cpu].loops_per_jiffy; +#else + lpj = &boot_cpu_data.loops_per_jiffy; +#endif + + if (!ref_freq) { + ref_freq = freq->old; + loops_per_jiffy_ref = *lpj; + tsc_khz_ref = tsc_khz; + } + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE)) { + *lpj = + cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); + + tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new); + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) + mark_tsc_unstable("cpufreq changes"); + } + + set_cyc2ns_scale(tsc_khz_ref); + + return 0; +} + +static struct notifier_block time_cpufreq_notifier_block = { + .notifier_call = time_cpufreq_notifier +}; + +static int __init cpufreq_tsc(void) +{ + cpufreq_register_notifier(&time_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + return 0; +} + +core_initcall(cpufreq_tsc); + +#endif + +/* + * Make an educated guess if the TSC is trustworthy and synchronized + * over all CPUs. + */ +__cpuinit int unsynchronized_tsc(void) +{ + if (tsc_unstable) + return 1; + +#ifdef CONFIG_SMP + if (apic_is_clustered_box()) + return 1; +#endif + /* Most intel systems have synchronized TSCs except for + multi node systems */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) { +#ifdef CONFIG_ACPI + /* But TSC doesn't tick in C3 so don't use it there */ + if (acpi_gbl_FADT.header.length > 0 && + acpi_gbl_FADT.C3latency < 1000) + return 1; +#endif + return 0; + } + + /* Assume multi socket systems are not synchronized */ + return num_present_cpus() > 1; +} + +int __init notsc_setup(char *s) +{ + notsc = 1; + return 1; +} + +__setup("notsc", notsc_setup); + + +/* clock source code: */ +static cycle_t read_tsc(void) +{ + cycle_t ret = (cycle_t)get_cycles_sync(); + return ret; +} + +static cycle_t __vsyscall_fn vread_tsc(void) +{ + cycle_t ret = (cycle_t)get_cycles_sync(); + return ret; +} + +static struct clocksource clocksource_tsc = { + .name = "tsc", + .rating = 300, + .read = read_tsc, + .mask = CLOCKSOURCE_MASK(64), + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS | + CLOCK_SOURCE_MUST_VERIFY, + .vread = vread_tsc, +}; + +void mark_tsc_unstable(char *reason) +{ + if (!tsc_unstable) { + tsc_unstable = 1; + printk("Marking TSC unstable due to %s\n", reason); + /* Change only the rating, when not registered */ + if (clocksource_tsc.mult) + clocksource_change_rating(&clocksource_tsc, 0); + else + clocksource_tsc.rating = 0; + } +} +EXPORT_SYMBOL_GPL(mark_tsc_unstable); + +void __init init_tsc_clocksource(void) +{ + if (!notsc) { + clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, + clocksource_tsc.shift); + if (check_tsc_unstable()) + clocksource_tsc.rating = 0; + + clocksource_register(&clocksource_tsc); + } +} diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c new file mode 100644 index 000000000000..355f5f506c81 --- /dev/null +++ b/arch/x86/kernel/tsc_sync.c @@ -0,0 +1,187 @@ +/* + * arch/x86_64/kernel/tsc_sync.c: check TSC synchronization. + * + * Copyright (C) 2006, Red Hat, Inc., Ingo Molnar + * + * We check whether all boot CPUs have their TSC's synchronized, + * print a warning if not and turn off the TSC clock-source. + * + * The warp-check is point-to-point between two CPUs, the CPU + * initiating the bootup is the 'source CPU', the freshly booting + * CPU is the 'target CPU'. + * + * Only two CPUs may participate - they can enter in any order. + * ( The serial nature of the boot logic and the CPU hotplug lock + * protects against more than 2 CPUs entering this code. ) + */ +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/nmi.h> +#include <asm/tsc.h> + +/* + * Entry/exit counters that make sure that both CPUs + * run the measurement code at once: + */ +static __cpuinitdata atomic_t start_count; +static __cpuinitdata atomic_t stop_count; + +/* + * We use a raw spinlock in this exceptional case, because + * we want to have the fastest, inlined, non-debug version + * of a critical section, to be able to prove TSC time-warps: + */ +static __cpuinitdata raw_spinlock_t sync_lock = __RAW_SPIN_LOCK_UNLOCKED; +static __cpuinitdata cycles_t last_tsc; +static __cpuinitdata cycles_t max_warp; +static __cpuinitdata int nr_warps; + +/* + * TSC-warp measurement loop running on both CPUs: + */ +static __cpuinit void check_tsc_warp(void) +{ + cycles_t start, now, prev, end; + int i; + + start = get_cycles_sync(); + /* + * The measurement runs for 20 msecs: + */ + end = start + tsc_khz * 20ULL; + now = start; + + for (i = 0; ; i++) { + /* + * We take the global lock, measure TSC, save the + * previous TSC that was measured (possibly on + * another CPU) and update the previous TSC timestamp. + */ + __raw_spin_lock(&sync_lock); + prev = last_tsc; + now = get_cycles_sync(); + last_tsc = now; + __raw_spin_unlock(&sync_lock); + + /* + * Be nice every now and then (and also check whether + * measurement is done [we also insert a 100 million + * loops safety exit, so we dont lock up in case the + * TSC readout is totally broken]): + */ + if (unlikely(!(i & 7))) { + if (now > end || i > 100000000) + break; + cpu_relax(); + touch_nmi_watchdog(); + } + /* + * Outside the critical section we can now see whether + * we saw a time-warp of the TSC going backwards: + */ + if (unlikely(prev > now)) { + __raw_spin_lock(&sync_lock); + max_warp = max(max_warp, prev - now); + nr_warps++; + __raw_spin_unlock(&sync_lock); + } + + } +} + +/* + * Source CPU calls into this - it waits for the freshly booted + * target CPU to arrive and then starts the measurement: + */ +void __cpuinit check_tsc_sync_source(int cpu) +{ + int cpus = 2; + + /* + * No need to check if we already know that the TSC is not + * synchronized: + */ + if (unsynchronized_tsc()) + return; + + printk(KERN_INFO "checking TSC synchronization [CPU#%d -> CPU#%d]:", + smp_processor_id(), cpu); + + /* + * Reset it - in case this is a second bootup: + */ + atomic_set(&stop_count, 0); + + /* + * Wait for the target to arrive: + */ + while (atomic_read(&start_count) != cpus-1) + cpu_relax(); + /* + * Trigger the target to continue into the measurement too: + */ + atomic_inc(&start_count); + + check_tsc_warp(); + + while (atomic_read(&stop_count) != cpus-1) + cpu_relax(); + + /* + * Reset it - just in case we boot another CPU later: + */ + atomic_set(&start_count, 0); + + if (nr_warps) { + printk("\n"); + printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs," + " turning off TSC clock.\n", max_warp); + mark_tsc_unstable("check_tsc_sync_source failed"); + nr_warps = 0; + max_warp = 0; + last_tsc = 0; + } else { + printk(" passed.\n"); + } + + /* + * Let the target continue with the bootup: + */ + atomic_inc(&stop_count); +} + +/* + * Freshly booted CPUs call into this: + */ +void __cpuinit check_tsc_sync_target(void) +{ + int cpus = 2; + + if (unsynchronized_tsc()) + return; + + /* + * Register this CPU's participation and wait for the + * source CPU to start the measurement: + */ + atomic_inc(&start_count); + while (atomic_read(&start_count) != cpus) + cpu_relax(); + + check_tsc_warp(); + + /* + * Ok, we are done: + */ + atomic_inc(&stop_count); + + /* + * Wait for the source CPU to print stuff: + */ + while (atomic_read(&stop_count) != cpus) + cpu_relax(); +} +#undef NR_LOOPS + diff --git a/arch/x86/kernel/verify_cpu_64.S b/arch/x86/kernel/verify_cpu_64.S new file mode 100644 index 000000000000..45b6f8a975a1 --- /dev/null +++ b/arch/x86/kernel/verify_cpu_64.S @@ -0,0 +1,105 @@ +/* + * + * verify_cpu.S - Code for cpu long mode and SSE verification. This + * code has been borrowed from boot/setup.S and was introduced by + * Andi Kleen. + * + * Copyright (c) 2007 Andi Kleen (ak@suse.de) + * Copyright (c) 2007 Eric Biederman (ebiederm@xmission.com) + * Copyright (c) 2007 Vivek Goyal (vgoyal@in.ibm.com) + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + * + * This is a common code for verification whether CPU supports + * long mode and SSE or not. It is not called directly instead this + * file is included at various places and compiled in that context. + * Following are the current usage. + * + * This file is included by both 16bit and 32bit code. + * + * arch/x86_64/boot/setup.S : Boot cpu verification (16bit) + * arch/x86_64/boot/compressed/head.S: Boot cpu verification (32bit) + * arch/x86_64/kernel/trampoline.S: secondary processor verfication (16bit) + * arch/x86_64/kernel/acpi/wakeup.S:Verfication at resume (16bit) + * + * verify_cpu, returns the status of cpu check in register %eax. + * 0: Success 1: Failure + * + * The caller needs to check for the error code and take the action + * appropriately. Either display a message or halt. + */ + +#include <asm/cpufeature.h> + +verify_cpu: + pushfl # Save caller passed flags + pushl $0 # Kill any dangerous flags + popfl + + pushfl # standard way to check for cpuid + popl %eax + movl %eax,%ebx + xorl $0x200000,%eax + pushl %eax + popfl + pushfl + popl %eax + cmpl %eax,%ebx + jz verify_cpu_no_longmode # cpu has no cpuid + + movl $0x0,%eax # See if cpuid 1 is implemented + cpuid + cmpl $0x1,%eax + jb verify_cpu_no_longmode # no cpuid 1 + + xor %di,%di + cmpl $0x68747541,%ebx # AuthenticAMD + jnz verify_cpu_noamd + cmpl $0x69746e65,%edx + jnz verify_cpu_noamd + cmpl $0x444d4163,%ecx + jnz verify_cpu_noamd + mov $1,%di # cpu is from AMD + +verify_cpu_noamd: + movl $0x1,%eax # Does the cpu have what it takes + cpuid + andl $REQUIRED_MASK0,%edx + xorl $REQUIRED_MASK0,%edx + jnz verify_cpu_no_longmode + + movl $0x80000000,%eax # See if extended cpuid is implemented + cpuid + cmpl $0x80000001,%eax + jb verify_cpu_no_longmode # no extended cpuid + + movl $0x80000001,%eax # Does the cpu have what it takes + cpuid + andl $REQUIRED_MASK1,%edx + xorl $REQUIRED_MASK1,%edx + jnz verify_cpu_no_longmode + +verify_cpu_sse_test: + movl $1,%eax + cpuid + andl $SSE_MASK,%edx + cmpl $SSE_MASK,%edx + je verify_cpu_sse_ok + test %di,%di + jz verify_cpu_no_longmode # only try to force SSE on AMD + movl $0xc0010015,%ecx # HWCR + rdmsr + btr $15,%eax # enable SSE + wrmsr + xor %di,%di # don't loop + jmp verify_cpu_sse_test # try again + +verify_cpu_no_longmode: + popfl # Restore caller passed flags + movl $1,%eax + ret +verify_cpu_sse_ok: + popfl # Restore caller passed flags + xorl %eax, %eax + ret diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c new file mode 100644 index 000000000000..f2dcd1d27c0a --- /dev/null +++ b/arch/x86/kernel/vm86_32.c @@ -0,0 +1,843 @@ +/* + * linux/kernel/vm86.c + * + * Copyright (C) 1994 Linus Torvalds + * + * 29 dec 2001 - Fixed oopses caused by unchecked access to the vm86 + * stack - Manfred Spraul <manfred@colorfullife.com> + * + * 22 mar 2002 - Manfred detected the stackfaults, but didn't handle + * them correctly. Now the emulation will be in a + * consistent state after stackfaults - Kasper Dupont + * <kasperd@daimi.au.dk> + * + * 22 mar 2002 - Added missing clear_IF in set_vflags_* Kasper Dupont + * <kasperd@daimi.au.dk> + * + * ?? ??? 2002 - Fixed premature returns from handle_vm86_fault + * caused by Kasper Dupont's changes - Stas Sergeev + * + * 4 apr 2002 - Fixed CHECK_IF_IN_TRAP broken by Stas' changes. + * Kasper Dupont <kasperd@daimi.au.dk> + * + * 9 apr 2002 - Changed syntax of macros in handle_vm86_fault. + * Kasper Dupont <kasperd@daimi.au.dk> + * + * 9 apr 2002 - Changed stack access macros to jump to a label + * instead of returning to userspace. This simplifies + * do_int, and is needed by handle_vm6_fault. Kasper + * Dupont <kasperd@daimi.au.dk> + * + */ + +#include <linux/capability.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/highmem.h> +#include <linux/ptrace.h> +#include <linux/audit.h> +#include <linux/stddef.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/tlbflush.h> +#include <asm/irq.h> + +/* + * Known problems: + * + * Interrupt handling is not guaranteed: + * - a real x86 will disable all interrupts for one instruction + * after a "mov ss,xx" to make stack handling atomic even without + * the 'lss' instruction. We can't guarantee this in v86 mode, + * as the next instruction might result in a page fault or similar. + * - a real x86 will have interrupts disabled for one instruction + * past the 'sti' that enables them. We don't bother with all the + * details yet. + * + * Let's hope these problems do not actually matter for anything. + */ + + +#define KVM86 ((struct kernel_vm86_struct *)regs) +#define VMPI KVM86->vm86plus + + +/* + * 8- and 16-bit register defines.. + */ +#define AL(regs) (((unsigned char *)&((regs)->pt.eax))[0]) +#define AH(regs) (((unsigned char *)&((regs)->pt.eax))[1]) +#define IP(regs) (*(unsigned short *)&((regs)->pt.eip)) +#define SP(regs) (*(unsigned short *)&((regs)->pt.esp)) + +/* + * virtual flags (16 and 32-bit versions) + */ +#define VFLAGS (*(unsigned short *)&(current->thread.v86flags)) +#define VEFLAGS (current->thread.v86flags) + +#define set_flags(X,new,mask) \ +((X) = ((X) & ~(mask)) | ((new) & (mask))) + +#define SAFE_MASK (0xDD5) +#define RETURN_MASK (0xDFF) + +/* convert kernel_vm86_regs to vm86_regs */ +static int copy_vm86_regs_to_user(struct vm86_regs __user *user, + const struct kernel_vm86_regs *regs) +{ + int ret = 0; + + /* kernel_vm86_regs is missing xgs, so copy everything up to + (but not including) orig_eax, and then rest including orig_eax. */ + ret += copy_to_user(user, regs, offsetof(struct kernel_vm86_regs, pt.orig_eax)); + ret += copy_to_user(&user->orig_eax, ®s->pt.orig_eax, + sizeof(struct kernel_vm86_regs) - + offsetof(struct kernel_vm86_regs, pt.orig_eax)); + + return ret; +} + +/* convert vm86_regs to kernel_vm86_regs */ +static int copy_vm86_regs_from_user(struct kernel_vm86_regs *regs, + const struct vm86_regs __user *user, + unsigned extra) +{ + int ret = 0; + + /* copy eax-xfs inclusive */ + ret += copy_from_user(regs, user, offsetof(struct kernel_vm86_regs, pt.orig_eax)); + /* copy orig_eax-__gsh+extra */ + ret += copy_from_user(®s->pt.orig_eax, &user->orig_eax, + sizeof(struct kernel_vm86_regs) - + offsetof(struct kernel_vm86_regs, pt.orig_eax) + + extra); + return ret; +} + +struct pt_regs * FASTCALL(save_v86_state(struct kernel_vm86_regs * regs)); +struct pt_regs * fastcall save_v86_state(struct kernel_vm86_regs * regs) +{ + struct tss_struct *tss; + struct pt_regs *ret; + unsigned long tmp; + + /* + * This gets called from entry.S with interrupts disabled, but + * from process context. Enable interrupts here, before trying + * to access user space. + */ + local_irq_enable(); + + if (!current->thread.vm86_info) { + printk("no vm86_info: BAD\n"); + do_exit(SIGSEGV); + } + set_flags(regs->pt.eflags, VEFLAGS, VIF_MASK | current->thread.v86mask); + tmp = copy_vm86_regs_to_user(¤t->thread.vm86_info->regs,regs); + tmp += put_user(current->thread.screen_bitmap,¤t->thread.vm86_info->screen_bitmap); + if (tmp) { + printk("vm86: could not access userspace vm86_info\n"); + do_exit(SIGSEGV); + } + + tss = &per_cpu(init_tss, get_cpu()); + current->thread.esp0 = current->thread.saved_esp0; + current->thread.sysenter_cs = __KERNEL_CS; + load_esp0(tss, ¤t->thread); + current->thread.saved_esp0 = 0; + put_cpu(); + + ret = KVM86->regs32; + + ret->xfs = current->thread.saved_fs; + loadsegment(gs, current->thread.saved_gs); + + return ret; +} + +static void mark_screen_rdonly(struct mm_struct *mm) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + spinlock_t *ptl; + int i; + + pgd = pgd_offset(mm, 0xA0000); + if (pgd_none_or_clear_bad(pgd)) + goto out; + pud = pud_offset(pgd, 0xA0000); + if (pud_none_or_clear_bad(pud)) + goto out; + pmd = pmd_offset(pud, 0xA0000); + if (pmd_none_or_clear_bad(pmd)) + goto out; + pte = pte_offset_map_lock(mm, pmd, 0xA0000, &ptl); + for (i = 0; i < 32; i++) { + if (pte_present(*pte)) + set_pte(pte, pte_wrprotect(*pte)); + pte++; + } + pte_unmap_unlock(pte, ptl); +out: + flush_tlb(); +} + + + +static int do_vm86_irq_handling(int subfunction, int irqnumber); +static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk); + +asmlinkage int sys_vm86old(struct pt_regs regs) +{ + struct vm86_struct __user *v86 = (struct vm86_struct __user *)regs.ebx; + struct kernel_vm86_struct info; /* declare this _on top_, + * this avoids wasting of stack space. + * This remains on the stack until we + * return to 32 bit user space. + */ + struct task_struct *tsk; + int tmp, ret = -EPERM; + + tsk = current; + if (tsk->thread.saved_esp0) + goto out; + tmp = copy_vm86_regs_from_user(&info.regs, &v86->regs, + offsetof(struct kernel_vm86_struct, vm86plus) - + sizeof(info.regs)); + ret = -EFAULT; + if (tmp) + goto out; + memset(&info.vm86plus, 0, (int)&info.regs32 - (int)&info.vm86plus); + info.regs32 = ®s; + tsk->thread.vm86_info = v86; + do_sys_vm86(&info, tsk); + ret = 0; /* we never return here */ +out: + return ret; +} + + +asmlinkage int sys_vm86(struct pt_regs regs) +{ + struct kernel_vm86_struct info; /* declare this _on top_, + * this avoids wasting of stack space. + * This remains on the stack until we + * return to 32 bit user space. + */ + struct task_struct *tsk; + int tmp, ret; + struct vm86plus_struct __user *v86; + + tsk = current; + switch (regs.ebx) { + case VM86_REQUEST_IRQ: + case VM86_FREE_IRQ: + case VM86_GET_IRQ_BITS: + case VM86_GET_AND_RESET_IRQ: + ret = do_vm86_irq_handling(regs.ebx, (int)regs.ecx); + goto out; + case VM86_PLUS_INSTALL_CHECK: + /* NOTE: on old vm86 stuff this will return the error + from access_ok(), because the subfunction is + interpreted as (invalid) address to vm86_struct. + So the installation check works. + */ + ret = 0; + goto out; + } + + /* we come here only for functions VM86_ENTER, VM86_ENTER_NO_BYPASS */ + ret = -EPERM; + if (tsk->thread.saved_esp0) + goto out; + v86 = (struct vm86plus_struct __user *)regs.ecx; + tmp = copy_vm86_regs_from_user(&info.regs, &v86->regs, + offsetof(struct kernel_vm86_struct, regs32) - + sizeof(info.regs)); + ret = -EFAULT; + if (tmp) + goto out; + info.regs32 = ®s; + info.vm86plus.is_vm86pus = 1; + tsk->thread.vm86_info = (struct vm86_struct __user *)v86; + do_sys_vm86(&info, tsk); + ret = 0; /* we never return here */ +out: + return ret; +} + + +static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk) +{ + struct tss_struct *tss; +/* + * make sure the vm86() system call doesn't try to do anything silly + */ + info->regs.pt.xds = 0; + info->regs.pt.xes = 0; + info->regs.pt.xfs = 0; + +/* we are clearing gs later just before "jmp resume_userspace", + * because it is not saved/restored. + */ + +/* + * The eflags register is also special: we cannot trust that the user + * has set it up safely, so this makes sure interrupt etc flags are + * inherited from protected mode. + */ + VEFLAGS = info->regs.pt.eflags; + info->regs.pt.eflags &= SAFE_MASK; + info->regs.pt.eflags |= info->regs32->eflags & ~SAFE_MASK; + info->regs.pt.eflags |= VM_MASK; + + switch (info->cpu_type) { + case CPU_286: + tsk->thread.v86mask = 0; + break; + case CPU_386: + tsk->thread.v86mask = NT_MASK | IOPL_MASK; + break; + case CPU_486: + tsk->thread.v86mask = AC_MASK | NT_MASK | IOPL_MASK; + break; + default: + tsk->thread.v86mask = ID_MASK | AC_MASK | NT_MASK | IOPL_MASK; + break; + } + +/* + * Save old state, set default return value (%eax) to 0 + */ + info->regs32->eax = 0; + tsk->thread.saved_esp0 = tsk->thread.esp0; + tsk->thread.saved_fs = info->regs32->xfs; + savesegment(gs, tsk->thread.saved_gs); + + tss = &per_cpu(init_tss, get_cpu()); + tsk->thread.esp0 = (unsigned long) &info->VM86_TSS_ESP0; + if (cpu_has_sep) + tsk->thread.sysenter_cs = 0; + load_esp0(tss, &tsk->thread); + put_cpu(); + + tsk->thread.screen_bitmap = info->screen_bitmap; + if (info->flags & VM86_SCREEN_BITMAP) + mark_screen_rdonly(tsk->mm); + + /*call audit_syscall_exit since we do not exit via the normal paths */ + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(0), 0); + + __asm__ __volatile__( + "movl %0,%%esp\n\t" + "movl %1,%%ebp\n\t" + "mov %2, %%gs\n\t" + "jmp resume_userspace" + : /* no outputs */ + :"r" (&info->regs), "r" (task_thread_info(tsk)), "r" (0)); + /* we never return here */ +} + +static inline void return_to_32bit(struct kernel_vm86_regs * regs16, int retval) +{ + struct pt_regs * regs32; + + regs32 = save_v86_state(regs16); + regs32->eax = retval; + __asm__ __volatile__("movl %0,%%esp\n\t" + "movl %1,%%ebp\n\t" + "jmp resume_userspace" + : : "r" (regs32), "r" (current_thread_info())); +} + +static inline void set_IF(struct kernel_vm86_regs * regs) +{ + VEFLAGS |= VIF_MASK; + if (VEFLAGS & VIP_MASK) + return_to_32bit(regs, VM86_STI); +} + +static inline void clear_IF(struct kernel_vm86_regs * regs) +{ + VEFLAGS &= ~VIF_MASK; +} + +static inline void clear_TF(struct kernel_vm86_regs * regs) +{ + regs->pt.eflags &= ~TF_MASK; +} + +static inline void clear_AC(struct kernel_vm86_regs * regs) +{ + regs->pt.eflags &= ~AC_MASK; +} + +/* It is correct to call set_IF(regs) from the set_vflags_* + * functions. However someone forgot to call clear_IF(regs) + * in the opposite case. + * After the command sequence CLI PUSHF STI POPF you should + * end up with interrups disabled, but you ended up with + * interrupts enabled. + * ( I was testing my own changes, but the only bug I + * could find was in a function I had not changed. ) + * [KD] + */ + +static inline void set_vflags_long(unsigned long eflags, struct kernel_vm86_regs * regs) +{ + set_flags(VEFLAGS, eflags, current->thread.v86mask); + set_flags(regs->pt.eflags, eflags, SAFE_MASK); + if (eflags & IF_MASK) + set_IF(regs); + else + clear_IF(regs); +} + +static inline void set_vflags_short(unsigned short flags, struct kernel_vm86_regs * regs) +{ + set_flags(VFLAGS, flags, current->thread.v86mask); + set_flags(regs->pt.eflags, flags, SAFE_MASK); + if (flags & IF_MASK) + set_IF(regs); + else + clear_IF(regs); +} + +static inline unsigned long get_vflags(struct kernel_vm86_regs * regs) +{ + unsigned long flags = regs->pt.eflags & RETURN_MASK; + + if (VEFLAGS & VIF_MASK) + flags |= IF_MASK; + flags |= IOPL_MASK; + return flags | (VEFLAGS & current->thread.v86mask); +} + +static inline int is_revectored(int nr, struct revectored_struct * bitmap) +{ + __asm__ __volatile__("btl %2,%1\n\tsbbl %0,%0" + :"=r" (nr) + :"m" (*bitmap),"r" (nr)); + return nr; +} + +#define val_byte(val, n) (((__u8 *)&val)[n]) + +#define pushb(base, ptr, val, err_label) \ + do { \ + __u8 __val = val; \ + ptr--; \ + if (put_user(__val, base + ptr) < 0) \ + goto err_label; \ + } while(0) + +#define pushw(base, ptr, val, err_label) \ + do { \ + __u16 __val = val; \ + ptr--; \ + if (put_user(val_byte(__val, 1), base + ptr) < 0) \ + goto err_label; \ + ptr--; \ + if (put_user(val_byte(__val, 0), base + ptr) < 0) \ + goto err_label; \ + } while(0) + +#define pushl(base, ptr, val, err_label) \ + do { \ + __u32 __val = val; \ + ptr--; \ + if (put_user(val_byte(__val, 3), base + ptr) < 0) \ + goto err_label; \ + ptr--; \ + if (put_user(val_byte(__val, 2), base + ptr) < 0) \ + goto err_label; \ + ptr--; \ + if (put_user(val_byte(__val, 1), base + ptr) < 0) \ + goto err_label; \ + ptr--; \ + if (put_user(val_byte(__val, 0), base + ptr) < 0) \ + goto err_label; \ + } while(0) + +#define popb(base, ptr, err_label) \ + ({ \ + __u8 __res; \ + if (get_user(__res, base + ptr) < 0) \ + goto err_label; \ + ptr++; \ + __res; \ + }) + +#define popw(base, ptr, err_label) \ + ({ \ + __u16 __res; \ + if (get_user(val_byte(__res, 0), base + ptr) < 0) \ + goto err_label; \ + ptr++; \ + if (get_user(val_byte(__res, 1), base + ptr) < 0) \ + goto err_label; \ + ptr++; \ + __res; \ + }) + +#define popl(base, ptr, err_label) \ + ({ \ + __u32 __res; \ + if (get_user(val_byte(__res, 0), base + ptr) < 0) \ + goto err_label; \ + ptr++; \ + if (get_user(val_byte(__res, 1), base + ptr) < 0) \ + goto err_label; \ + ptr++; \ + if (get_user(val_byte(__res, 2), base + ptr) < 0) \ + goto err_label; \ + ptr++; \ + if (get_user(val_byte(__res, 3), base + ptr) < 0) \ + goto err_label; \ + ptr++; \ + __res; \ + }) + +/* There are so many possible reasons for this function to return + * VM86_INTx, so adding another doesn't bother me. We can expect + * userspace programs to be able to handle it. (Getting a problem + * in userspace is always better than an Oops anyway.) [KD] + */ +static void do_int(struct kernel_vm86_regs *regs, int i, + unsigned char __user * ssp, unsigned short sp) +{ + unsigned long __user *intr_ptr; + unsigned long segoffs; + + if (regs->pt.xcs == BIOSSEG) + goto cannot_handle; + if (is_revectored(i, &KVM86->int_revectored)) + goto cannot_handle; + if (i==0x21 && is_revectored(AH(regs),&KVM86->int21_revectored)) + goto cannot_handle; + intr_ptr = (unsigned long __user *) (i << 2); + if (get_user(segoffs, intr_ptr)) + goto cannot_handle; + if ((segoffs >> 16) == BIOSSEG) + goto cannot_handle; + pushw(ssp, sp, get_vflags(regs), cannot_handle); + pushw(ssp, sp, regs->pt.xcs, cannot_handle); + pushw(ssp, sp, IP(regs), cannot_handle); + regs->pt.xcs = segoffs >> 16; + SP(regs) -= 6; + IP(regs) = segoffs & 0xffff; + clear_TF(regs); + clear_IF(regs); + clear_AC(regs); + return; + +cannot_handle: + return_to_32bit(regs, VM86_INTx + (i << 8)); +} + +int handle_vm86_trap(struct kernel_vm86_regs * regs, long error_code, int trapno) +{ + if (VMPI.is_vm86pus) { + if ( (trapno==3) || (trapno==1) ) + return_to_32bit(regs, VM86_TRAP + (trapno << 8)); + do_int(regs, trapno, (unsigned char __user *) (regs->pt.xss << 4), SP(regs)); + return 0; + } + if (trapno !=1) + return 1; /* we let this handle by the calling routine */ + if (current->ptrace & PT_PTRACED) { + unsigned long flags; + spin_lock_irqsave(¤t->sighand->siglock, flags); + sigdelset(¤t->blocked, SIGTRAP); + recalc_sigpending(); + spin_unlock_irqrestore(¤t->sighand->siglock, flags); + } + send_sig(SIGTRAP, current, 1); + current->thread.trap_no = trapno; + current->thread.error_code = error_code; + return 0; +} + +void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code) +{ + unsigned char opcode; + unsigned char __user *csp; + unsigned char __user *ssp; + unsigned short ip, sp, orig_flags; + int data32, pref_done; + +#define CHECK_IF_IN_TRAP \ + if (VMPI.vm86dbg_active && VMPI.vm86dbg_TFpendig) \ + newflags |= TF_MASK +#define VM86_FAULT_RETURN do { \ + if (VMPI.force_return_for_pic && (VEFLAGS & (IF_MASK | VIF_MASK))) \ + return_to_32bit(regs, VM86_PICRETURN); \ + if (orig_flags & TF_MASK) \ + handle_vm86_trap(regs, 0, 1); \ + return; } while (0) + + orig_flags = *(unsigned short *)®s->pt.eflags; + + csp = (unsigned char __user *) (regs->pt.xcs << 4); + ssp = (unsigned char __user *) (regs->pt.xss << 4); + sp = SP(regs); + ip = IP(regs); + + data32 = 0; + pref_done = 0; + do { + switch (opcode = popb(csp, ip, simulate_sigsegv)) { + case 0x66: /* 32-bit data */ data32=1; break; + case 0x67: /* 32-bit address */ break; + case 0x2e: /* CS */ break; + case 0x3e: /* DS */ break; + case 0x26: /* ES */ break; + case 0x36: /* SS */ break; + case 0x65: /* GS */ break; + case 0x64: /* FS */ break; + case 0xf2: /* repnz */ break; + case 0xf3: /* rep */ break; + default: pref_done = 1; + } + } while (!pref_done); + + switch (opcode) { + + /* pushf */ + case 0x9c: + if (data32) { + pushl(ssp, sp, get_vflags(regs), simulate_sigsegv); + SP(regs) -= 4; + } else { + pushw(ssp, sp, get_vflags(regs), simulate_sigsegv); + SP(regs) -= 2; + } + IP(regs) = ip; + VM86_FAULT_RETURN; + + /* popf */ + case 0x9d: + { + unsigned long newflags; + if (data32) { + newflags=popl(ssp, sp, simulate_sigsegv); + SP(regs) += 4; + } else { + newflags = popw(ssp, sp, simulate_sigsegv); + SP(regs) += 2; + } + IP(regs) = ip; + CHECK_IF_IN_TRAP; + if (data32) { + set_vflags_long(newflags, regs); + } else { + set_vflags_short(newflags, regs); + } + VM86_FAULT_RETURN; + } + + /* int xx */ + case 0xcd: { + int intno=popb(csp, ip, simulate_sigsegv); + IP(regs) = ip; + if (VMPI.vm86dbg_active) { + if ( (1 << (intno &7)) & VMPI.vm86dbg_intxxtab[intno >> 3] ) + return_to_32bit(regs, VM86_INTx + (intno << 8)); + } + do_int(regs, intno, ssp, sp); + return; + } + + /* iret */ + case 0xcf: + { + unsigned long newip; + unsigned long newcs; + unsigned long newflags; + if (data32) { + newip=popl(ssp, sp, simulate_sigsegv); + newcs=popl(ssp, sp, simulate_sigsegv); + newflags=popl(ssp, sp, simulate_sigsegv); + SP(regs) += 12; + } else { + newip = popw(ssp, sp, simulate_sigsegv); + newcs = popw(ssp, sp, simulate_sigsegv); + newflags = popw(ssp, sp, simulate_sigsegv); + SP(regs) += 6; + } + IP(regs) = newip; + regs->pt.xcs = newcs; + CHECK_IF_IN_TRAP; + if (data32) { + set_vflags_long(newflags, regs); + } else { + set_vflags_short(newflags, regs); + } + VM86_FAULT_RETURN; + } + + /* cli */ + case 0xfa: + IP(regs) = ip; + clear_IF(regs); + VM86_FAULT_RETURN; + + /* sti */ + /* + * Damn. This is incorrect: the 'sti' instruction should actually + * enable interrupts after the /next/ instruction. Not good. + * + * Probably needs some horsing around with the TF flag. Aiee.. + */ + case 0xfb: + IP(regs) = ip; + set_IF(regs); + VM86_FAULT_RETURN; + + default: + return_to_32bit(regs, VM86_UNKNOWN); + } + + return; + +simulate_sigsegv: + /* FIXME: After a long discussion with Stas we finally + * agreed, that this is wrong. Here we should + * really send a SIGSEGV to the user program. + * But how do we create the correct context? We + * are inside a general protection fault handler + * and has just returned from a page fault handler. + * The correct context for the signal handler + * should be a mixture of the two, but how do we + * get the information? [KD] + */ + return_to_32bit(regs, VM86_UNKNOWN); +} + +/* ---------------- vm86 special IRQ passing stuff ----------------- */ + +#define VM86_IRQNAME "vm86irq" + +static struct vm86_irqs { + struct task_struct *tsk; + int sig; +} vm86_irqs[16]; + +static DEFINE_SPINLOCK(irqbits_lock); +static int irqbits; + +#define ALLOWED_SIGS ( 1 /* 0 = don't send a signal */ \ + | (1 << SIGUSR1) | (1 << SIGUSR2) | (1 << SIGIO) | (1 << SIGURG) \ + | (1 << SIGUNUSED) ) + +static irqreturn_t irq_handler(int intno, void *dev_id) +{ + int irq_bit; + unsigned long flags; + + spin_lock_irqsave(&irqbits_lock, flags); + irq_bit = 1 << intno; + if ((irqbits & irq_bit) || ! vm86_irqs[intno].tsk) + goto out; + irqbits |= irq_bit; + if (vm86_irqs[intno].sig) + send_sig(vm86_irqs[intno].sig, vm86_irqs[intno].tsk, 1); + /* + * IRQ will be re-enabled when user asks for the irq (whether + * polling or as a result of the signal) + */ + disable_irq_nosync(intno); + spin_unlock_irqrestore(&irqbits_lock, flags); + return IRQ_HANDLED; + +out: + spin_unlock_irqrestore(&irqbits_lock, flags); + return IRQ_NONE; +} + +static inline void free_vm86_irq(int irqnumber) +{ + unsigned long flags; + + free_irq(irqnumber, NULL); + vm86_irqs[irqnumber].tsk = NULL; + + spin_lock_irqsave(&irqbits_lock, flags); + irqbits &= ~(1 << irqnumber); + spin_unlock_irqrestore(&irqbits_lock, flags); +} + +void release_vm86_irqs(struct task_struct *task) +{ + int i; + for (i = FIRST_VM86_IRQ ; i <= LAST_VM86_IRQ; i++) + if (vm86_irqs[i].tsk == task) + free_vm86_irq(i); +} + +static inline int get_and_reset_irq(int irqnumber) +{ + int bit; + unsigned long flags; + int ret = 0; + + if (invalid_vm86_irq(irqnumber)) return 0; + if (vm86_irqs[irqnumber].tsk != current) return 0; + spin_lock_irqsave(&irqbits_lock, flags); + bit = irqbits & (1 << irqnumber); + irqbits &= ~bit; + if (bit) { + enable_irq(irqnumber); + ret = 1; + } + + spin_unlock_irqrestore(&irqbits_lock, flags); + return ret; +} + + +static int do_vm86_irq_handling(int subfunction, int irqnumber) +{ + int ret; + switch (subfunction) { + case VM86_GET_AND_RESET_IRQ: { + return get_and_reset_irq(irqnumber); + } + case VM86_GET_IRQ_BITS: { + return irqbits; + } + case VM86_REQUEST_IRQ: { + int sig = irqnumber >> 8; + int irq = irqnumber & 255; + if (!capable(CAP_SYS_ADMIN)) return -EPERM; + if (!((1 << sig) & ALLOWED_SIGS)) return -EPERM; + if (invalid_vm86_irq(irq)) return -EPERM; + if (vm86_irqs[irq].tsk) return -EPERM; + ret = request_irq(irq, &irq_handler, 0, VM86_IRQNAME, NULL); + if (ret) return ret; + vm86_irqs[irq].sig = sig; + vm86_irqs[irq].tsk = current; + return irq; + } + case VM86_FREE_IRQ: { + if (invalid_vm86_irq(irqnumber)) return -EPERM; + if (!vm86_irqs[irqnumber].tsk) return 0; + if (vm86_irqs[irqnumber].tsk != current) return -EPERM; + free_vm86_irq(irqnumber); + return 0; + } + } + return -EINVAL; +} + diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c new file mode 100644 index 000000000000..18673e0f193b --- /dev/null +++ b/arch/x86/kernel/vmi_32.c @@ -0,0 +1,981 @@ +/* + * VMI specific paravirt-ops implementation + * + * Copyright (C) 2005, VMware, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to zach@vmware.com + * + */ + +#include <linux/module.h> +#include <linux/cpu.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <linux/highmem.h> +#include <linux/sched.h> +#include <asm/vmi.h> +#include <asm/io.h> +#include <asm/fixmap.h> +#include <asm/apicdef.h> +#include <asm/apic.h> +#include <asm/processor.h> +#include <asm/timer.h> +#include <asm/vmi_time.h> +#include <asm/kmap_types.h> + +/* Convenient for calling VMI functions indirectly in the ROM */ +typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void); +typedef u64 __attribute__((regparm(2))) (VROMLONGFUNC)(int); + +#define call_vrom_func(rom,func) \ + (((VROMFUNC *)(rom->func))()) + +#define call_vrom_long_func(rom,func,arg) \ + (((VROMLONGFUNC *)(rom->func)) (arg)) + +static struct vrom_header *vmi_rom; +static int disable_pge; +static int disable_pse; +static int disable_sep; +static int disable_tsc; +static int disable_mtrr; +static int disable_noidle; +static int disable_vmi_timer; + +/* Cached VMI operations */ +static struct { + void (*cpuid)(void /* non-c */); + void (*_set_ldt)(u32 selector); + void (*set_tr)(u32 selector); + void (*set_kernel_stack)(u32 selector, u32 esp0); + void (*allocate_page)(u32, u32, u32, u32, u32); + void (*release_page)(u32, u32); + void (*set_pte)(pte_t, pte_t *, unsigned); + void (*update_pte)(pte_t *, unsigned); + void (*set_linear_mapping)(int, void *, u32, u32); + void (*_flush_tlb)(int); + void (*set_initial_ap_state)(int, int); + void (*halt)(void); + void (*set_lazy_mode)(int mode); +} vmi_ops; + +/* Cached VMI operations */ +struct vmi_timer_ops vmi_timer_ops; + +/* + * VMI patching routines. + */ +#define MNEM_CALL 0xe8 +#define MNEM_JMP 0xe9 +#define MNEM_RET 0xc3 + +#define IRQ_PATCH_INT_MASK 0 +#define IRQ_PATCH_DISABLE 5 + +static inline void patch_offset(void *insnbuf, + unsigned long eip, unsigned long dest) +{ + *(unsigned long *)(insnbuf+1) = dest-eip-5; +} + +static unsigned patch_internal(int call, unsigned len, void *insnbuf, + unsigned long eip) +{ + u64 reloc; + struct vmi_relocation_info *const rel = (struct vmi_relocation_info *)&reloc; + reloc = call_vrom_long_func(vmi_rom, get_reloc, call); + switch(rel->type) { + case VMI_RELOCATION_CALL_REL: + BUG_ON(len < 5); + *(char *)insnbuf = MNEM_CALL; + patch_offset(insnbuf, eip, (unsigned long)rel->eip); + return 5; + + case VMI_RELOCATION_JUMP_REL: + BUG_ON(len < 5); + *(char *)insnbuf = MNEM_JMP; + patch_offset(insnbuf, eip, (unsigned long)rel->eip); + return 5; + + case VMI_RELOCATION_NOP: + /* obliterate the whole thing */ + return 0; + + case VMI_RELOCATION_NONE: + /* leave native code in place */ + break; + + default: + BUG(); + } + return len; +} + +/* + * Apply patch if appropriate, return length of new instruction + * sequence. The callee does nop padding for us. + */ +static unsigned vmi_patch(u8 type, u16 clobbers, void *insns, + unsigned long eip, unsigned len) +{ + switch (type) { + case PARAVIRT_PATCH(irq_disable): + return patch_internal(VMI_CALL_DisableInterrupts, len, + insns, eip); + case PARAVIRT_PATCH(irq_enable): + return patch_internal(VMI_CALL_EnableInterrupts, len, + insns, eip); + case PARAVIRT_PATCH(restore_fl): + return patch_internal(VMI_CALL_SetInterruptMask, len, + insns, eip); + case PARAVIRT_PATCH(save_fl): + return patch_internal(VMI_CALL_GetInterruptMask, len, + insns, eip); + case PARAVIRT_PATCH(iret): + return patch_internal(VMI_CALL_IRET, len, insns, eip); + case PARAVIRT_PATCH(irq_enable_sysexit): + return patch_internal(VMI_CALL_SYSEXIT, len, insns, eip); + default: + break; + } + return len; +} + +/* CPUID has non-C semantics, and paravirt-ops API doesn't match hardware ISA */ +static void vmi_cpuid(unsigned int *eax, unsigned int *ebx, + unsigned int *ecx, unsigned int *edx) +{ + int override = 0; + if (*eax == 1) + override = 1; + asm volatile ("call *%6" + : "=a" (*eax), + "=b" (*ebx), + "=c" (*ecx), + "=d" (*edx) + : "0" (*eax), "2" (*ecx), "r" (vmi_ops.cpuid)); + if (override) { + if (disable_pse) + *edx &= ~X86_FEATURE_PSE; + if (disable_pge) + *edx &= ~X86_FEATURE_PGE; + if (disable_sep) + *edx &= ~X86_FEATURE_SEP; + if (disable_tsc) + *edx &= ~X86_FEATURE_TSC; + if (disable_mtrr) + *edx &= ~X86_FEATURE_MTRR; + } +} + +static inline void vmi_maybe_load_tls(struct desc_struct *gdt, int nr, struct desc_struct *new) +{ + if (gdt[nr].a != new->a || gdt[nr].b != new->b) + write_gdt_entry(gdt, nr, new->a, new->b); +} + +static void vmi_load_tls(struct thread_struct *t, unsigned int cpu) +{ + struct desc_struct *gdt = get_cpu_gdt_table(cpu); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0]); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1]); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2]); +} + +static void vmi_set_ldt(const void *addr, unsigned entries) +{ + unsigned cpu = smp_processor_id(); + u32 low, high; + + pack_descriptor(&low, &high, (unsigned long)addr, + entries * sizeof(struct desc_struct) - 1, + DESCTYPE_LDT, 0); + write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, low, high); + vmi_ops._set_ldt(entries ? GDT_ENTRY_LDT*sizeof(struct desc_struct) : 0); +} + +static void vmi_set_tr(void) +{ + vmi_ops.set_tr(GDT_ENTRY_TSS*sizeof(struct desc_struct)); +} + +static void vmi_load_esp0(struct tss_struct *tss, + struct thread_struct *thread) +{ + tss->x86_tss.esp0 = thread->esp0; + + /* This can only happen when SEP is enabled, no need to test "SEP"arately */ + if (unlikely(tss->x86_tss.ss1 != thread->sysenter_cs)) { + tss->x86_tss.ss1 = thread->sysenter_cs; + wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0); + } + vmi_ops.set_kernel_stack(__KERNEL_DS, tss->x86_tss.esp0); +} + +static void vmi_flush_tlb_user(void) +{ + vmi_ops._flush_tlb(VMI_FLUSH_TLB); +} + +static void vmi_flush_tlb_kernel(void) +{ + vmi_ops._flush_tlb(VMI_FLUSH_TLB | VMI_FLUSH_GLOBAL); +} + +/* Stub to do nothing at all; used for delays and unimplemented calls */ +static void vmi_nop(void) +{ +} + +#ifdef CONFIG_DEBUG_PAGE_TYPE + +#ifdef CONFIG_X86_PAE +#define MAX_BOOT_PTS (2048+4+1) +#else +#define MAX_BOOT_PTS (1024+1) +#endif + +/* + * During boot, mem_map is not yet available in paging_init, so stash + * all the boot page allocations here. + */ +static struct { + u32 pfn; + int type; +} boot_page_allocations[MAX_BOOT_PTS]; +static int num_boot_page_allocations; +static int boot_allocations_applied; + +void vmi_apply_boot_page_allocations(void) +{ + int i; + BUG_ON(!mem_map); + for (i = 0; i < num_boot_page_allocations; i++) { + struct page *page = pfn_to_page(boot_page_allocations[i].pfn); + page->type = boot_page_allocations[i].type; + page->type = boot_page_allocations[i].type & + ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + } + boot_allocations_applied = 1; +} + +static void record_page_type(u32 pfn, int type) +{ + BUG_ON(num_boot_page_allocations >= MAX_BOOT_PTS); + boot_page_allocations[num_boot_page_allocations].pfn = pfn; + boot_page_allocations[num_boot_page_allocations].type = type; + num_boot_page_allocations++; +} + +static void check_zeroed_page(u32 pfn, int type, struct page *page) +{ + u32 *ptr; + int i; + int limit = PAGE_SIZE / sizeof(int); + + if (page_address(page)) + ptr = (u32 *)page_address(page); + else + ptr = (u32 *)__va(pfn << PAGE_SHIFT); + /* + * When cloning the root in non-PAE mode, only the userspace + * pdes need to be zeroed. + */ + if (type & VMI_PAGE_CLONE) + limit = USER_PTRS_PER_PGD; + for (i = 0; i < limit; i++) + BUG_ON(ptr[i]); +} + +/* + * We stash the page type into struct page so we can verify the page + * types are used properly. + */ +static void vmi_set_page_type(u32 pfn, int type) +{ + /* PAE can have multiple roots per page - don't track */ + if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP)) + return; + + if (boot_allocations_applied) { + struct page *page = pfn_to_page(pfn); + if (type != VMI_PAGE_NORMAL) + BUG_ON(page->type); + else + BUG_ON(page->type == VMI_PAGE_NORMAL); + page->type = type & ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + if (type & VMI_PAGE_ZEROED) + check_zeroed_page(pfn, type, page); + } else { + record_page_type(pfn, type); + } +} + +static void vmi_check_page_type(u32 pfn, int type) +{ + /* PAE can have multiple roots per page - skip checks */ + if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP)) + return; + + type &= ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + if (boot_allocations_applied) { + struct page *page = pfn_to_page(pfn); + BUG_ON((page->type ^ type) & VMI_PAGE_PAE); + BUG_ON(type == VMI_PAGE_NORMAL && page->type); + BUG_ON((type & page->type) == 0); + } +} +#else +#define vmi_set_page_type(p,t) do { } while (0) +#define vmi_check_page_type(p,t) do { } while (0) +#endif + +#ifdef CONFIG_HIGHPTE +static void *vmi_kmap_atomic_pte(struct page *page, enum km_type type) +{ + void *va = kmap_atomic(page, type); + + /* + * Internally, the VMI ROM must map virtual addresses to physical + * addresses for processing MMU updates. By the time MMU updates + * are issued, this information is typically already lost. + * Fortunately, the VMI provides a cache of mapping slots for active + * page tables. + * + * We use slot zero for the linear mapping of physical memory, and + * in HIGHPTE kernels, slot 1 and 2 for KM_PTE0 and KM_PTE1. + * + * args: SLOT VA COUNT PFN + */ + BUG_ON(type != KM_PTE0 && type != KM_PTE1); + vmi_ops.set_linear_mapping((type - KM_PTE0)+1, va, 1, page_to_pfn(page)); + + return va; +} +#endif + +static void vmi_allocate_pt(struct mm_struct *mm, u32 pfn) +{ + vmi_set_page_type(pfn, VMI_PAGE_L1); + vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0); +} + +static void vmi_allocate_pd(u32 pfn) +{ + /* + * This call comes in very early, before mem_map is setup. + * It is called only for swapper_pg_dir, which already has + * data on it. + */ + vmi_set_page_type(pfn, VMI_PAGE_L2); + vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0); +} + +static void vmi_allocate_pd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count) +{ + vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE); + vmi_check_page_type(clonepfn, VMI_PAGE_L2); + vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count); +} + +static void vmi_release_pt(u32 pfn) +{ + vmi_ops.release_page(pfn, VMI_PAGE_L1); + vmi_set_page_type(pfn, VMI_PAGE_NORMAL); +} + +static void vmi_release_pd(u32 pfn) +{ + vmi_ops.release_page(pfn, VMI_PAGE_L2); + vmi_set_page_type(pfn, VMI_PAGE_NORMAL); +} + +/* + * Helper macros for MMU update flags. We can defer updates until a flush + * or page invalidation only if the update is to the current address space + * (otherwise, there is no flush). We must check against init_mm, since + * this could be a kernel update, which usually passes init_mm, although + * sometimes this check can be skipped if we know the particular function + * is only called on user mode PTEs. We could change the kernel to pass + * current->active_mm here, but in particular, I was unsure if changing + * mm/highmem.c to do this would still be correct on other architectures. + */ +#define is_current_as(mm, mustbeuser) ((mm) == current->active_mm || \ + (!mustbeuser && (mm) == &init_mm)) +#define vmi_flags_addr(mm, addr, level, user) \ + ((level) | (is_current_as(mm, user) ? \ + (VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0)) +#define vmi_flags_addr_defer(mm, addr, level, user) \ + ((level) | (is_current_as(mm, user) ? \ + (VMI_PAGE_DEFER | VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0)) + +static void vmi_update_pte(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.update_pte(ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_update_pte_defer(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.update_pte(ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_set_pte(pte_t *ptep, pte_t pte) +{ + /* XXX because of set_pmd_pte, this can be called on PT or PD layers */ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE | VMI_PAGE_PD); + vmi_ops.set_pte(pte, ptep, VMI_PAGE_PT); +} + +static void vmi_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_set_pmd(pmd_t *pmdp, pmd_t pmdval) +{ +#ifdef CONFIG_X86_PAE + const pte_t pte = { pmdval.pmd, pmdval.pmd >> 32 }; + vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PMD); +#else + const pte_t pte = { pmdval.pud.pgd.pgd }; + vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PGD); +#endif + vmi_ops.set_pte(pte, (pte_t *)pmdp, VMI_PAGE_PD); +} + +#ifdef CONFIG_X86_PAE + +static void vmi_set_pte_atomic(pte_t *ptep, pte_t pteval) +{ + /* + * XXX This is called from set_pmd_pte, but at both PT + * and PD layers so the VMI_PAGE_PT flag is wrong. But + * it is only called for large page mapping changes, + * the Xen backend, doesn't support large pages, and the + * ESX backend doesn't depend on the flag. + */ + set_64bit((unsigned long long *)ptep,pte_val(pteval)); + vmi_ops.update_pte(ptep, VMI_PAGE_PT); +} + +static void vmi_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 1)); +} + +static void vmi_set_pud(pud_t *pudp, pud_t pudval) +{ + /* Um, eww */ + const pte_t pte = { pudval.pgd.pgd, pudval.pgd.pgd >> 32 }; + vmi_check_page_type(__pa(pudp) >> PAGE_SHIFT, VMI_PAGE_PGD); + vmi_ops.set_pte(pte, (pte_t *)pudp, VMI_PAGE_PDP); +} + +static void vmi_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + const pte_t pte = { 0 }; + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_pmd_clear(pmd_t *pmd) +{ + const pte_t pte = { 0 }; + vmi_check_page_type(__pa(pmd) >> PAGE_SHIFT, VMI_PAGE_PMD); + vmi_ops.set_pte(pte, (pte_t *)pmd, VMI_PAGE_PD); +} +#endif + +#ifdef CONFIG_SMP +static void __devinit +vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip, + unsigned long start_esp) +{ + struct vmi_ap_state ap; + + /* Default everything to zero. This is fine for most GPRs. */ + memset(&ap, 0, sizeof(struct vmi_ap_state)); + + ap.gdtr_limit = GDT_SIZE - 1; + ap.gdtr_base = (unsigned long) get_cpu_gdt_table(phys_apicid); + + ap.idtr_limit = IDT_ENTRIES * 8 - 1; + ap.idtr_base = (unsigned long) idt_table; + + ap.ldtr = 0; + + ap.cs = __KERNEL_CS; + ap.eip = (unsigned long) start_eip; + ap.ss = __KERNEL_DS; + ap.esp = (unsigned long) start_esp; + + ap.ds = __USER_DS; + ap.es = __USER_DS; + ap.fs = __KERNEL_PERCPU; + ap.gs = 0; + + ap.eflags = 0; + +#ifdef CONFIG_X86_PAE + /* efer should match BSP efer. */ + if (cpu_has_nx) { + unsigned l, h; + rdmsr(MSR_EFER, l, h); + ap.efer = (unsigned long long) h << 32 | l; + } +#endif + + ap.cr3 = __pa(swapper_pg_dir); + /* Protected mode, paging, AM, WP, NE, MP. */ + ap.cr0 = 0x80050023; + ap.cr4 = mmu_cr4_features; + vmi_ops.set_initial_ap_state((u32)&ap, phys_apicid); +} +#endif + +static void vmi_set_lazy_mode(enum paravirt_lazy_mode mode) +{ + static DEFINE_PER_CPU(enum paravirt_lazy_mode, lazy_mode); + + if (!vmi_ops.set_lazy_mode) + return; + + /* Modes should never nest or overlap */ + BUG_ON(__get_cpu_var(lazy_mode) && !(mode == PARAVIRT_LAZY_NONE || + mode == PARAVIRT_LAZY_FLUSH)); + + if (mode == PARAVIRT_LAZY_FLUSH) { + vmi_ops.set_lazy_mode(0); + vmi_ops.set_lazy_mode(__get_cpu_var(lazy_mode)); + } else { + vmi_ops.set_lazy_mode(mode); + __get_cpu_var(lazy_mode) = mode; + } +} + +static inline int __init check_vmi_rom(struct vrom_header *rom) +{ + struct pci_header *pci; + struct pnp_header *pnp; + const char *manufacturer = "UNKNOWN"; + const char *product = "UNKNOWN"; + const char *license = "unspecified"; + + if (rom->rom_signature != 0xaa55) + return 0; + if (rom->vrom_signature != VMI_SIGNATURE) + return 0; + if (rom->api_version_maj != VMI_API_REV_MAJOR || + rom->api_version_min+1 < VMI_API_REV_MINOR+1) { + printk(KERN_WARNING "VMI: Found mismatched rom version %d.%d\n", + rom->api_version_maj, + rom->api_version_min); + return 0; + } + + /* + * Relying on the VMI_SIGNATURE field is not 100% safe, so check + * the PCI header and device type to make sure this is really a + * VMI device. + */ + if (!rom->pci_header_offs) { + printk(KERN_WARNING "VMI: ROM does not contain PCI header.\n"); + return 0; + } + + pci = (struct pci_header *)((char *)rom+rom->pci_header_offs); + if (pci->vendorID != PCI_VENDOR_ID_VMWARE || + pci->deviceID != PCI_DEVICE_ID_VMWARE_VMI) { + /* Allow it to run... anyways, but warn */ + printk(KERN_WARNING "VMI: ROM from unknown manufacturer\n"); + } + + if (rom->pnp_header_offs) { + pnp = (struct pnp_header *)((char *)rom+rom->pnp_header_offs); + if (pnp->manufacturer_offset) + manufacturer = (const char *)rom+pnp->manufacturer_offset; + if (pnp->product_offset) + product = (const char *)rom+pnp->product_offset; + } + + if (rom->license_offs) + license = (char *)rom+rom->license_offs; + + printk(KERN_INFO "VMI: Found %s %s, API version %d.%d, ROM version %d.%d\n", + manufacturer, product, + rom->api_version_maj, rom->api_version_min, + pci->rom_version_maj, pci->rom_version_min); + + /* Don't allow BSD/MIT here for now because we don't want to end up + with any binary only shim layers */ + if (strcmp(license, "GPL") && strcmp(license, "GPL v2")) { + printk(KERN_WARNING "VMI: Non GPL license `%s' found for ROM. Not used.\n", + license); + return 0; + } + + return 1; +} + +/* + * Probe for the VMI option ROM + */ +static inline int __init probe_vmi_rom(void) +{ + unsigned long base; + + /* VMI ROM is in option ROM area, check signature */ + for (base = 0xC0000; base < 0xE0000; base += 2048) { + struct vrom_header *romstart; + romstart = (struct vrom_header *)isa_bus_to_virt(base); + if (check_vmi_rom(romstart)) { + vmi_rom = romstart; + return 1; + } + } + return 0; +} + +/* + * VMI setup common to all processors + */ +void vmi_bringup(void) +{ + /* We must establish the lowmem mapping for MMU ops to work */ + if (vmi_ops.set_linear_mapping) + vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, max_low_pfn, 0); +} + +/* + * Return a pointer to a VMI function or NULL if unimplemented + */ +static void *vmi_get_function(int vmicall) +{ + u64 reloc; + const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc; + reloc = call_vrom_long_func(vmi_rom, get_reloc, vmicall); + BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL); + if (rel->type == VMI_RELOCATION_CALL_REL) + return (void *)rel->eip; + else + return NULL; +} + +/* + * Helper macro for making the VMI paravirt-ops fill code readable. + * For unimplemented operations, fall back to default, unless nop + * is returned by the ROM. + */ +#define para_fill(opname, vmicall) \ +do { \ + reloc = call_vrom_long_func(vmi_rom, get_reloc, \ + VMI_CALL_##vmicall); \ + if (rel->type == VMI_RELOCATION_CALL_REL) \ + paravirt_ops.opname = (void *)rel->eip; \ + else if (rel->type == VMI_RELOCATION_NOP) \ + paravirt_ops.opname = (void *)vmi_nop; \ + else if (rel->type != VMI_RELOCATION_NONE) \ + printk(KERN_WARNING "VMI: Unknown relocation " \ + "type %d for " #vmicall"\n",\ + rel->type); \ +} while (0) + +/* + * Helper macro for making the VMI paravirt-ops fill code readable. + * For cached operations which do not match the VMI ROM ABI and must + * go through a tranlation stub. Ignore NOPs, since it is not clear + * a NOP * VMI function corresponds to a NOP paravirt-op when the + * functions are not in 1-1 correspondence. + */ +#define para_wrap(opname, wrapper, cache, vmicall) \ +do { \ + reloc = call_vrom_long_func(vmi_rom, get_reloc, \ + VMI_CALL_##vmicall); \ + BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL); \ + if (rel->type == VMI_RELOCATION_CALL_REL) { \ + paravirt_ops.opname = wrapper; \ + vmi_ops.cache = (void *)rel->eip; \ + } \ +} while (0) + +/* + * Activate the VMI interface and switch into paravirtualized mode + */ +static inline int __init activate_vmi(void) +{ + short kernel_cs; + u64 reloc; + const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc; + + if (call_vrom_func(vmi_rom, vmi_init) != 0) { + printk(KERN_ERR "VMI ROM failed to initialize!"); + return 0; + } + savesegment(cs, kernel_cs); + + paravirt_ops.paravirt_enabled = 1; + paravirt_ops.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK; + + paravirt_ops.patch = vmi_patch; + paravirt_ops.name = "vmi"; + + /* + * Many of these operations are ABI compatible with VMI. + * This means we can fill in the paravirt-ops with direct + * pointers into the VMI ROM. If the calling convention for + * these operations changes, this code needs to be updated. + * + * Exceptions + * CPUID paravirt-op uses pointers, not the native ISA + * halt has no VMI equivalent; all VMI halts are "safe" + * no MSR support yet - just trap and emulate. VMI uses the + * same ABI as the native ISA, but Linux wants exceptions + * from bogus MSR read / write handled + * rdpmc is not yet used in Linux + */ + + /* CPUID is special, so very special it gets wrapped like a present */ + para_wrap(cpuid, vmi_cpuid, cpuid, CPUID); + + para_fill(clts, CLTS); + para_fill(get_debugreg, GetDR); + para_fill(set_debugreg, SetDR); + para_fill(read_cr0, GetCR0); + para_fill(read_cr2, GetCR2); + para_fill(read_cr3, GetCR3); + para_fill(read_cr4, GetCR4); + para_fill(write_cr0, SetCR0); + para_fill(write_cr2, SetCR2); + para_fill(write_cr3, SetCR3); + para_fill(write_cr4, SetCR4); + para_fill(save_fl, GetInterruptMask); + para_fill(restore_fl, SetInterruptMask); + para_fill(irq_disable, DisableInterrupts); + para_fill(irq_enable, EnableInterrupts); + + para_fill(wbinvd, WBINVD); + para_fill(read_tsc, RDTSC); + + /* The following we emulate with trap and emulate for now */ + /* paravirt_ops.read_msr = vmi_rdmsr */ + /* paravirt_ops.write_msr = vmi_wrmsr */ + /* paravirt_ops.rdpmc = vmi_rdpmc */ + + /* TR interface doesn't pass TR value, wrap */ + para_wrap(load_tr_desc, vmi_set_tr, set_tr, SetTR); + + /* LDT is special, too */ + para_wrap(set_ldt, vmi_set_ldt, _set_ldt, SetLDT); + + para_fill(load_gdt, SetGDT); + para_fill(load_idt, SetIDT); + para_fill(store_gdt, GetGDT); + para_fill(store_idt, GetIDT); + para_fill(store_tr, GetTR); + paravirt_ops.load_tls = vmi_load_tls; + para_fill(write_ldt_entry, WriteLDTEntry); + para_fill(write_gdt_entry, WriteGDTEntry); + para_fill(write_idt_entry, WriteIDTEntry); + para_wrap(load_esp0, vmi_load_esp0, set_kernel_stack, UpdateKernelStack); + para_fill(set_iopl_mask, SetIOPLMask); + para_fill(io_delay, IODelay); + para_wrap(set_lazy_mode, vmi_set_lazy_mode, set_lazy_mode, SetLazyMode); + + /* user and kernel flush are just handled with different flags to FlushTLB */ + para_wrap(flush_tlb_user, vmi_flush_tlb_user, _flush_tlb, FlushTLB); + para_wrap(flush_tlb_kernel, vmi_flush_tlb_kernel, _flush_tlb, FlushTLB); + para_fill(flush_tlb_single, InvalPage); + + /* + * Until a standard flag format can be agreed on, we need to + * implement these as wrappers in Linux. Get the VMI ROM + * function pointers for the two backend calls. + */ +#ifdef CONFIG_X86_PAE + vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxELong); + vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxELong); +#else + vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxE); + vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxE); +#endif + + if (vmi_ops.set_pte) { + paravirt_ops.set_pte = vmi_set_pte; + paravirt_ops.set_pte_at = vmi_set_pte_at; + paravirt_ops.set_pmd = vmi_set_pmd; +#ifdef CONFIG_X86_PAE + paravirt_ops.set_pte_atomic = vmi_set_pte_atomic; + paravirt_ops.set_pte_present = vmi_set_pte_present; + paravirt_ops.set_pud = vmi_set_pud; + paravirt_ops.pte_clear = vmi_pte_clear; + paravirt_ops.pmd_clear = vmi_pmd_clear; +#endif + } + + if (vmi_ops.update_pte) { + paravirt_ops.pte_update = vmi_update_pte; + paravirt_ops.pte_update_defer = vmi_update_pte_defer; + } + + vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage); + if (vmi_ops.allocate_page) { + paravirt_ops.alloc_pt = vmi_allocate_pt; + paravirt_ops.alloc_pd = vmi_allocate_pd; + paravirt_ops.alloc_pd_clone = vmi_allocate_pd_clone; + } + + vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage); + if (vmi_ops.release_page) { + paravirt_ops.release_pt = vmi_release_pt; + paravirt_ops.release_pd = vmi_release_pd; + } + + /* Set linear is needed in all cases */ + vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping); +#ifdef CONFIG_HIGHPTE + if (vmi_ops.set_linear_mapping) + paravirt_ops.kmap_atomic_pte = vmi_kmap_atomic_pte; +#endif + + /* + * These MUST always be patched. Don't support indirect jumps + * through these operations, as the VMI interface may use either + * a jump or a call to get to these operations, depending on + * the backend. They are performance critical anyway, so requiring + * a patch is not a big problem. + */ + paravirt_ops.irq_enable_sysexit = (void *)0xfeedbab0; + paravirt_ops.iret = (void *)0xbadbab0; + +#ifdef CONFIG_SMP + para_wrap(startup_ipi_hook, vmi_startup_ipi_hook, set_initial_ap_state, SetInitialAPState); +#endif + +#ifdef CONFIG_X86_LOCAL_APIC + para_fill(apic_read, APICRead); + para_fill(apic_write, APICWrite); + para_fill(apic_write_atomic, APICWrite); +#endif + + /* + * Check for VMI timer functionality by probing for a cycle frequency method + */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_GetCycleFrequency); + if (!disable_vmi_timer && rel->type != VMI_RELOCATION_NONE) { + vmi_timer_ops.get_cycle_frequency = (void *)rel->eip; + vmi_timer_ops.get_cycle_counter = + vmi_get_function(VMI_CALL_GetCycleCounter); + vmi_timer_ops.get_wallclock = + vmi_get_function(VMI_CALL_GetWallclockTime); + vmi_timer_ops.wallclock_updated = + vmi_get_function(VMI_CALL_WallclockUpdated); + vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm); + vmi_timer_ops.cancel_alarm = + vmi_get_function(VMI_CALL_CancelAlarm); + paravirt_ops.time_init = vmi_time_init; + paravirt_ops.get_wallclock = vmi_get_wallclock; + paravirt_ops.set_wallclock = vmi_set_wallclock; +#ifdef CONFIG_X86_LOCAL_APIC + paravirt_ops.setup_boot_clock = vmi_time_bsp_init; + paravirt_ops.setup_secondary_clock = vmi_time_ap_init; +#endif + paravirt_ops.sched_clock = vmi_sched_clock; + paravirt_ops.get_cpu_khz = vmi_cpu_khz; + + /* We have true wallclock functions; disable CMOS clock sync */ + no_sync_cmos_clock = 1; + } else { + disable_noidle = 1; + disable_vmi_timer = 1; + } + + para_fill(safe_halt, Halt); + + /* + * Alternative instruction rewriting doesn't happen soon enough + * to convert VMI_IRET to a call instead of a jump; so we have + * to do this before IRQs get reenabled. Fortunately, it is + * idempotent. + */ + apply_paravirt(__parainstructions, __parainstructions_end); + + vmi_bringup(); + + return 1; +} + +#undef para_fill + +void __init vmi_init(void) +{ + unsigned long flags; + + if (!vmi_rom) + probe_vmi_rom(); + else + check_vmi_rom(vmi_rom); + + /* In case probing for or validating the ROM failed, basil */ + if (!vmi_rom) + return; + + reserve_top_address(-vmi_rom->virtual_top); + + local_irq_save(flags); + activate_vmi(); + +#ifdef CONFIG_X86_IO_APIC + /* This is virtual hardware; timer routing is wired correctly */ + no_timer_check = 1; +#endif + local_irq_restore(flags & X86_EFLAGS_IF); +} + +static int __init parse_vmi(char *arg) +{ + if (!arg) + return -EINVAL; + + if (!strcmp(arg, "disable_pge")) { + clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability); + disable_pge = 1; + } else if (!strcmp(arg, "disable_pse")) { + clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability); + disable_pse = 1; + } else if (!strcmp(arg, "disable_sep")) { + clear_bit(X86_FEATURE_SEP, boot_cpu_data.x86_capability); + disable_sep = 1; + } else if (!strcmp(arg, "disable_tsc")) { + clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability); + disable_tsc = 1; + } else if (!strcmp(arg, "disable_mtrr")) { + clear_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability); + disable_mtrr = 1; + } else if (!strcmp(arg, "disable_timer")) { + disable_vmi_timer = 1; + disable_noidle = 1; + } else if (!strcmp(arg, "disable_noidle")) + disable_noidle = 1; + return 0; +} + +early_param("vmi", parse_vmi); diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c new file mode 100644 index 000000000000..b1b5ab08b26e --- /dev/null +++ b/arch/x86/kernel/vmiclock_32.c @@ -0,0 +1,320 @@ +/* + * VMI paravirtual timer support routines. + * + * Copyright (C) 2007, VMware, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/cpumask.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> + +#include <asm/vmi.h> +#include <asm/vmi_time.h> +#include <asm/arch_hooks.h> +#include <asm/apicdef.h> +#include <asm/apic.h> +#include <asm/timer.h> +#include <asm/i8253.h> + +#include <irq_vectors.h> +#include "io_ports.h" + +#define VMI_ONESHOT (VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL | vmi_get_alarm_wiring()) +#define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring()) + +static DEFINE_PER_CPU(struct clock_event_device, local_events); + +static inline u32 vmi_counter(u32 flags) +{ + /* Given VMI_ONESHOT or VMI_PERIODIC, return the corresponding + * cycle counter. */ + return flags & VMI_ALARM_COUNTER_MASK; +} + +/* paravirt_ops.get_wallclock = vmi_get_wallclock */ +unsigned long vmi_get_wallclock(void) +{ + unsigned long long wallclock; + wallclock = vmi_timer_ops.get_wallclock(); // nsec + (void)do_div(wallclock, 1000000000); // sec + + return wallclock; +} + +/* paravirt_ops.set_wallclock = vmi_set_wallclock */ +int vmi_set_wallclock(unsigned long now) +{ + return 0; +} + +/* paravirt_ops.sched_clock = vmi_sched_clock */ +unsigned long long vmi_sched_clock(void) +{ + return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE)); +} + +/* paravirt_ops.get_cpu_khz = vmi_cpu_khz */ +unsigned long vmi_cpu_khz(void) +{ + unsigned long long khz; + khz = vmi_timer_ops.get_cycle_frequency(); + (void)do_div(khz, 1000); + return khz; +} + +static inline unsigned int vmi_get_timer_vector(void) +{ +#ifdef CONFIG_X86_IO_APIC + return FIRST_DEVICE_VECTOR; +#else + return FIRST_EXTERNAL_VECTOR; +#endif +} + +/** vmi clockchip */ +#ifdef CONFIG_X86_LOCAL_APIC +static unsigned int startup_timer_irq(unsigned int irq) +{ + unsigned long val = apic_read(APIC_LVTT); + apic_write(APIC_LVTT, vmi_get_timer_vector()); + + return (val & APIC_SEND_PENDING); +} + +static void mask_timer_irq(unsigned int irq) +{ + unsigned long val = apic_read(APIC_LVTT); + apic_write(APIC_LVTT, val | APIC_LVT_MASKED); +} + +static void unmask_timer_irq(unsigned int irq) +{ + unsigned long val = apic_read(APIC_LVTT); + apic_write(APIC_LVTT, val & ~APIC_LVT_MASKED); +} + +static void ack_timer_irq(unsigned int irq) +{ + ack_APIC_irq(); +} + +static struct irq_chip vmi_chip __read_mostly = { + .name = "VMI-LOCAL", + .startup = startup_timer_irq, + .mask = mask_timer_irq, + .unmask = unmask_timer_irq, + .ack = ack_timer_irq +}; +#endif + +/** vmi clockevent */ +#define VMI_ALARM_WIRED_IRQ0 0x00000000 +#define VMI_ALARM_WIRED_LVTT 0x00010000 +static int vmi_wiring = VMI_ALARM_WIRED_IRQ0; + +static inline int vmi_get_alarm_wiring(void) +{ + return vmi_wiring; +} + +static void vmi_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + cycle_t now, cycles_per_hz; + BUG_ON(!irqs_disabled()); + + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_RESUME: + break; + case CLOCK_EVT_MODE_PERIODIC: + cycles_per_hz = vmi_timer_ops.get_cycle_frequency(); + (void)do_div(cycles_per_hz, HZ); + now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_PERIODIC)); + vmi_timer_ops.set_alarm(VMI_PERIODIC, now, cycles_per_hz); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + switch (evt->mode) { + case CLOCK_EVT_MODE_ONESHOT: + vmi_timer_ops.cancel_alarm(VMI_ONESHOT); + break; + case CLOCK_EVT_MODE_PERIODIC: + vmi_timer_ops.cancel_alarm(VMI_PERIODIC); + break; + default: + break; + } + break; + default: + break; + } +} + +static int vmi_timer_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + /* Unfortunately, set_next_event interface only passes relative + * expiry, but we want absolute expiry. It'd be better if were + * were passed an aboslute expiry, since a bunch of time may + * have been stolen between the time the delta is computed and + * when we set the alarm below. */ + cycle_t now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_ONESHOT)); + + BUG_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT); + vmi_timer_ops.set_alarm(VMI_ONESHOT, now + delta, 0); + return 0; +} + +static struct clock_event_device vmi_clockevent = { + .name = "vmi-timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 22, + .set_mode = vmi_timer_set_mode, + .set_next_event = vmi_timer_next_event, + .rating = 1000, + .irq = 0, +}; + +static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &__get_cpu_var(local_events); + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction vmi_clock_action = { + .name = "vmi-timer", + .handler = vmi_timer_interrupt, + .flags = IRQF_DISABLED | IRQF_NOBALANCING, + .mask = CPU_MASK_ALL, +}; + +static void __devinit vmi_time_init_clockevent(void) +{ + cycle_t cycles_per_msec; + struct clock_event_device *evt; + + int cpu = smp_processor_id(); + evt = &__get_cpu_var(local_events); + + /* Use cycles_per_msec since div_sc params are 32-bits. */ + cycles_per_msec = vmi_timer_ops.get_cycle_frequency(); + (void)do_div(cycles_per_msec, 1000); + + memcpy(evt, &vmi_clockevent, sizeof(*evt)); + /* Must pick .shift such that .mult fits in 32-bits. Choosing + * .shift to be 22 allows 2^(32-22) cycles per nano-seconds + * before overflow. */ + evt->mult = div_sc(cycles_per_msec, NSEC_PER_MSEC, evt->shift); + /* Upper bound is clockevent's use of ulong for cycle deltas. */ + evt->max_delta_ns = clockevent_delta2ns(ULONG_MAX, evt); + evt->min_delta_ns = clockevent_delta2ns(1, evt); + evt->cpumask = cpumask_of_cpu(cpu); + + printk(KERN_WARNING "vmi: registering clock event %s. mult=%lu shift=%u\n", + evt->name, evt->mult, evt->shift); + clockevents_register_device(evt); +} + +void __init vmi_time_init(void) +{ + /* Disable PIT: BIOSes start PIT CH0 with 18.2hz peridic. */ + outb_p(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */ + + vmi_time_init_clockevent(); + setup_irq(0, &vmi_clock_action); +} + +#ifdef CONFIG_X86_LOCAL_APIC +void __devinit vmi_time_bsp_init(void) +{ + /* + * On APIC systems, we want local timers to fire on each cpu. We do + * this by programming LVTT to deliver timer events to the IRQ handler + * for IRQ-0, since we can't re-use the APIC local timer handler + * without interfering with that code. + */ + clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL); + local_irq_disable(); +#ifdef CONFIG_X86_SMP + /* + * XXX handle_percpu_irq only defined for SMP; we need to switch over + * to using it, since this is a local interrupt, which each CPU must + * handle individually without locking out or dropping simultaneous + * local timers on other CPUs. We also don't want to trigger the + * quirk workaround code for interrupts which gets invoked from + * handle_percpu_irq via eoi, so we use our own IRQ chip. + */ + set_irq_chip_and_handler_name(0, &vmi_chip, handle_percpu_irq, "lvtt"); +#else + set_irq_chip_and_handler_name(0, &vmi_chip, handle_edge_irq, "lvtt"); +#endif + vmi_wiring = VMI_ALARM_WIRED_LVTT; + apic_write(APIC_LVTT, vmi_get_timer_vector()); + local_irq_enable(); + clockevents_notify(CLOCK_EVT_NOTIFY_RESUME, NULL); +} + +void __devinit vmi_time_ap_init(void) +{ + vmi_time_init_clockevent(); + apic_write(APIC_LVTT, vmi_get_timer_vector()); +} +#endif + +/** vmi clocksource */ + +static cycle_t read_real_cycles(void) +{ + return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL); +} + +static struct clocksource clocksource_vmi = { + .name = "vmi-timer", + .rating = 450, + .read = read_real_cycles, + .mask = CLOCKSOURCE_MASK(64), + .mult = 0, /* to be set */ + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init init_vmi_clocksource(void) +{ + cycle_t cycles_per_msec; + + if (!vmi_timer_ops.get_cycle_frequency) + return 0; + /* Use khz2mult rather than hz2mult since hz arg is only 32-bits. */ + cycles_per_msec = vmi_timer_ops.get_cycle_frequency(); + (void)do_div(cycles_per_msec, 1000); + + /* Note that clocksource.{mult, shift} converts in the opposite direction + * as clockevents. */ + clocksource_vmi.mult = clocksource_khz2mult(cycles_per_msec, + clocksource_vmi.shift); + + printk(KERN_WARNING "vmi: registering clock source khz=%lld\n", cycles_per_msec); + return clocksource_register(&clocksource_vmi); + +} +module_init(init_vmi_clocksource); diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S new file mode 100644 index 000000000000..849ee611f013 --- /dev/null +++ b/arch/x86/kernel/vmlinux.lds.S @@ -0,0 +1,5 @@ +#ifdef CONFIG_X86_32 +# include "vmlinux_32.lds.S" +#else +# include "vmlinux_64.lds.S" +#endif diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S new file mode 100644 index 000000000000..7d72cce00529 --- /dev/null +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -0,0 +1,213 @@ +/* ld script to make i386 Linux kernel + * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; + * + * Don't define absolute symbols until and unless you know that symbol + * value is should remain constant even if kernel image is relocated + * at run time. Absolute symbols are not relocated. If symbol value should + * change if kernel is relocated, make the symbol section relative and + * put it inside the section definition. + */ + +/* Don't define absolute symbols until and unless you know that symbol + * value is should remain constant even if kernel image is relocated + * at run time. Absolute symbols are not relocated. If symbol value should + * change if kernel is relocated, make the symbol section relative and + * put it inside the section definition. + */ +#define LOAD_OFFSET __PAGE_OFFSET + +#include <asm-generic/vmlinux.lds.h> +#include <asm/thread_info.h> +#include <asm/page.h> +#include <asm/cache.h> +#include <asm/boot.h> + +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) +ENTRY(phys_startup_32) +jiffies = jiffies_64; + +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(7); /* RWE */ + note PT_NOTE FLAGS(0); /* ___ */ +} +SECTIONS +{ + . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; + phys_startup_32 = startup_32 - LOAD_OFFSET; + + .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { + _text = .; /* Text and read-only data */ + *(.text.head) + } :text = 0x9090 + + /* read-only */ + .text : AT(ADDR(.text) - LOAD_OFFSET) { + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + *(.fixup) + *(.gnu.warning) + _etext = .; /* End of text section */ + } :text = 0x9090 + + . = ALIGN(16); /* Exception table */ + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + } + + NOTES :text :note + + BUG_TABLE :text + + . = ALIGN(4); + .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { + __tracedata_start = .; + *(.tracedata) + __tracedata_end = .; + } + + RODATA + + /* writeable */ + . = ALIGN(4096); + .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ + DATA_DATA + CONSTRUCTORS + } :data + + . = ALIGN(4096); + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { + __nosave_begin = .; + *(.data.nosave) + . = ALIGN(4096); + __nosave_end = .; + } + + . = ALIGN(4096); + .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { + *(.data.page_aligned) + *(.data.idt) + } + + . = ALIGN(32); + .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { + *(.data.cacheline_aligned) + } + + /* rarely changed data like cpu maps */ + . = ALIGN(32); + .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { + *(.data.read_mostly) + _edata = .; /* End of data section */ + } + + . = ALIGN(THREAD_SIZE); /* init_task */ + .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { + *(.data.init_task) + } + + /* might get freed after init */ + . = ALIGN(4096); + .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { + __smp_locks = .; + *(.smp_locks) + __smp_locks_end = .; + } + /* will be freed after init + * Following ALIGN() is required to make sure no other data falls on the + * same page where __smp_alt_end is pointing as that page might be freed + * after boot. Always make sure that ALIGN() directive is present after + * the section which contains __smp_alt_end. + */ + . = ALIGN(4096); + + /* will be freed after init */ + . = ALIGN(4096); /* Init code and data */ + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { + __init_begin = .; + _sinittext = .; + *(.init.text) + _einittext = .; + } + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) } + . = ALIGN(16); + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { + __setup_start = .; + *(.init.setup) + __setup_end = .; + } + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { + __initcall_start = .; + INITCALLS + __initcall_end = .; + } + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + } + SECURITY_INIT + . = ALIGN(4); + .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { + __alt_instructions = .; + *(.altinstructions) + __alt_instructions_end = .; + } + .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { + *(.altinstr_replacement) + } + . = ALIGN(4); + .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { + __parainstructions = .; + *(.parainstructions) + __parainstructions_end = .; + } + /* .exit.text is discard at runtime, not link time, to deal with references + from .altinstructions and .eh_frame */ + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) } + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) } +#if defined(CONFIG_BLK_DEV_INITRD) + . = ALIGN(4096); + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + } +#endif + . = ALIGN(4096); + .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { + __per_cpu_start = .; + *(.data.percpu) + *(.data.percpu.shared_aligned) + __per_cpu_end = .; + } + . = ALIGN(4096); + /* freed after init ends here */ + + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { + __init_end = .; + __bss_start = .; /* BSS */ + *(.bss.page_aligned) + *(.bss) + . = ALIGN(4); + __bss_stop = .; + _end = . ; + /* This is where the kernel creates the early boot page tables */ + . = ALIGN(4096); + pg0 = . ; + } + + /* Sections to be discarded */ + /DISCARD/ : { + *(.exitcall.exit) + } + + STABS_DEBUG + + DWARF_DEBUG +} diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S new file mode 100644 index 000000000000..ba8ea97abd21 --- /dev/null +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -0,0 +1,235 @@ +/* ld script to make x86-64 Linux kernel + * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; + */ + +#define LOAD_OFFSET __START_KERNEL_map + +#include <asm-generic/vmlinux.lds.h> +#include <asm/page.h> + +#undef i386 /* in case the preprocessor is a 32bit one */ + +OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") +OUTPUT_ARCH(i386:x86-64) +ENTRY(phys_startup_64) +jiffies_64 = jiffies; +_proxy_pda = 1; +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(7); /* RWE */ + user PT_LOAD FLAGS(7); /* RWE */ + data.init PT_LOAD FLAGS(7); /* RWE */ + note PT_NOTE FLAGS(4); /* R__ */ +} +SECTIONS +{ + . = __START_KERNEL; + phys_startup_64 = startup_64 - LOAD_OFFSET; + _text = .; /* Text and read-only data */ + .text : AT(ADDR(.text) - LOAD_OFFSET) { + /* First the code that has to be first for bootstrapping */ + *(.text.head) + _stext = .; + /* Then the rest */ + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + *(.fixup) + *(.gnu.warning) + } :text = 0x9090 + /* out-of-line lock text */ + .text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET) { *(.text.lock) } + + _etext = .; /* End of text section */ + + . = ALIGN(16); /* Exception table */ + __start___ex_table = .; + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) } + __stop___ex_table = .; + + NOTES :text :note + + BUG_TABLE :text + + RODATA + + . = ALIGN(4); + .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { + __tracedata_start = .; + *(.tracedata) + __tracedata_end = .; + } + + . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ + /* Data */ + .data : AT(ADDR(.data) - LOAD_OFFSET) { + DATA_DATA + CONSTRUCTORS + } :data + + _edata = .; /* End of data section */ + + . = ALIGN(PAGE_SIZE); + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { + *(.data.cacheline_aligned) + } + . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES); + .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { + *(.data.read_mostly) + } + +#define VSYSCALL_ADDR (-10*1024*1024) +#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) +#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) + +#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR) +#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET) + +#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR) +#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) + + . = VSYSCALL_ADDR; + .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user + __vsyscall_0 = VSYSCALL_VIRT_ADDR; + + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) } + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) + { *(.vsyscall_gtod_data) } + vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); + .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) + { *(.vsyscall_clock) } + vsyscall_clock = VVIRT(.vsyscall_clock); + + + .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) + { *(.vsyscall_1) } + .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) + { *(.vsyscall_2) } + + .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) } + vgetcpu_mode = VVIRT(.vgetcpu_mode); + + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) } + jiffies = VVIRT(.jiffies); + + .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) + { *(.vsyscall_3) } + + . = VSYSCALL_VIRT_ADDR + 4096; + +#undef VSYSCALL_ADDR +#undef VSYSCALL_PHYS_ADDR +#undef VSYSCALL_VIRT_ADDR +#undef VLOAD_OFFSET +#undef VLOAD +#undef VVIRT_OFFSET +#undef VVIRT + + . = ALIGN(8192); /* init_task */ + .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { + *(.data.init_task) + }:data.init + + . = ALIGN(4096); + .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { + *(.data.page_aligned) + } + + /* might get freed after init */ + . = ALIGN(4096); + __smp_alt_begin = .; + __smp_locks = .; + .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { + *(.smp_locks) + } + __smp_locks_end = .; + . = ALIGN(4096); + __smp_alt_end = .; + + . = ALIGN(4096); /* Init code and data */ + __init_begin = .; + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { + _sinittext = .; + *(.init.text) + _einittext = .; + } + __initdata_begin = .; + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) } + __initdata_end = .; + . = ALIGN(16); + __setup_start = .; + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { *(.init.setup) } + __setup_end = .; + __initcall_start = .; + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { + INITCALLS + } + __initcall_end = .; + __con_initcall_start = .; + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + *(.con_initcall.init) + } + __con_initcall_end = .; + SECURITY_INIT + . = ALIGN(8); + __alt_instructions = .; + .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { + *(.altinstructions) + } + __alt_instructions_end = .; + .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { + *(.altinstr_replacement) + } + /* .exit.text is discard at runtime, not link time, to deal with references + from .altinstructions and .eh_frame */ + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) } + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) } + +/* vdso blob that is mapped into user space */ + vdso_start = . ; + .vdso : AT(ADDR(.vdso) - LOAD_OFFSET) { *(.vdso) } + . = ALIGN(4096); + vdso_end = .; + +#ifdef CONFIG_BLK_DEV_INITRD + . = ALIGN(4096); + __initramfs_start = .; + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) } + __initramfs_end = .; +#endif + + PERCPU(4096) + + . = ALIGN(4096); + __init_end = .; + + . = ALIGN(4096); + __nosave_begin = .; + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) } + . = ALIGN(4096); + __nosave_end = .; + + __bss_start = .; /* BSS */ + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { + *(.bss.page_aligned) + *(.bss) + } + __bss_stop = .; + + _end = . ; + + /* Sections to be discarded */ + /DISCARD/ : { + *(.exitcall.exit) + *(.eh_frame) + } + + STABS_DEBUG + + DWARF_DEBUG +} diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c new file mode 100644 index 000000000000..414caf0c5f9a --- /dev/null +++ b/arch/x86/kernel/vsmp_64.c @@ -0,0 +1,49 @@ +/* + * vSMPowered(tm) systems specific initialization + * Copyright (C) 2005 ScaleMP Inc. + * + * Use of this code is subject to the terms and conditions of the + * GNU general public license version 2. See "COPYING" or + * http://www.gnu.org/licenses/gpl.html + * + * Ravikiran Thirumalai <kiran@scalemp.com>, + * Shai Fultheim <shai@scalemp.com> + */ + +#include <linux/init.h> +#include <linux/pci_ids.h> +#include <linux/pci_regs.h> +#include <asm/pci-direct.h> +#include <asm/io.h> + +static int __init vsmp_init(void) +{ + void *address; + unsigned int cap, ctl; + + if (!early_pci_allowed()) + return 0; + + /* Check if we are running on a ScaleMP vSMP box */ + if ((read_pci_config_16(0, 0x1f, 0, PCI_VENDOR_ID) != PCI_VENDOR_ID_SCALEMP) || + (read_pci_config_16(0, 0x1f, 0, PCI_DEVICE_ID) != PCI_DEVICE_ID_SCALEMP_VSMP_CTL)) + return 0; + + /* set vSMP magic bits to indicate vSMP capable kernel */ + address = ioremap(read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0), 8); + cap = readl(address); + ctl = readl(address + 4); + printk("vSMP CTL: capabilities:0x%08x control:0x%08x\n", cap, ctl); + if (cap & ctl & (1 << 4)) { + /* Turn on vSMP IRQ fastpath handling (see system.h) */ + ctl &= ~(1 << 4); + writel(ctl, address + 4); + ctl = readl(address + 4); + printk("vSMP CTL: control set to:0x%08x\n", ctl); + } + + iounmap(address); + return 0; +} + +core_initcall(vsmp_init); diff --git a/arch/x86/kernel/vsyscall-int80_32.S b/arch/x86/kernel/vsyscall-int80_32.S new file mode 100644 index 000000000000..103cab6aa7c0 --- /dev/null +++ b/arch/x86/kernel/vsyscall-int80_32.S @@ -0,0 +1,53 @@ +/* + * Code for the vsyscall page. This version uses the old int $0x80 method. + * + * NOTE: + * 1) __kernel_vsyscall _must_ be first in this page. + * 2) there are alignment constraints on this stub, see vsyscall-sigreturn.S + * for details. + */ + + .text + .globl __kernel_vsyscall + .type __kernel_vsyscall,@function +__kernel_vsyscall: +.LSTART_vsyscall: + int $0x80 + ret +.LEND_vsyscall: + .size __kernel_vsyscall,.-.LSTART_vsyscall + .previous + + .section .eh_frame,"a",@progbits +.LSTARTFRAMEDLSI: + .long .LENDCIEDLSI-.LSTARTCIEDLSI +.LSTARTCIEDLSI: + .long 0 /* CIE ID */ + .byte 1 /* Version number */ + .string "zR" /* NUL-terminated augmentation string */ + .uleb128 1 /* Code alignment factor */ + .sleb128 -4 /* Data alignment factor */ + .byte 8 /* Return address register column */ + .uleb128 1 /* Augmentation value length */ + .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */ + .byte 0x0c /* DW_CFA_def_cfa */ + .uleb128 4 + .uleb128 4 + .byte 0x88 /* DW_CFA_offset, column 0x8 */ + .uleb128 1 + .align 4 +.LENDCIEDLSI: + .long .LENDFDEDLSI-.LSTARTFDEDLSI /* Length FDE */ +.LSTARTFDEDLSI: + .long .LSTARTFDEDLSI-.LSTARTFRAMEDLSI /* CIE pointer */ + .long .LSTART_vsyscall-. /* PC-relative start address */ + .long .LEND_vsyscall-.LSTART_vsyscall + .uleb128 0 + .align 4 +.LENDFDEDLSI: + .previous + +/* + * Get the common code for the sigreturn entry points. + */ +#include "vsyscall-sigreturn_32.S" diff --git a/arch/x86/kernel/vsyscall-note_32.S b/arch/x86/kernel/vsyscall-note_32.S new file mode 100644 index 000000000000..fcf376a37f79 --- /dev/null +++ b/arch/x86/kernel/vsyscall-note_32.S @@ -0,0 +1,45 @@ +/* + * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text. + * Here we can supply some information useful to userland. + */ + +#include <linux/version.h> +#include <linux/elfnote.h> + +/* Ideally this would use UTS_NAME, but using a quoted string here + doesn't work. Remember to change this when changing the + kernel's name. */ +ELFNOTE_START(Linux, 0, "a") + .long LINUX_VERSION_CODE +ELFNOTE_END + +#ifdef CONFIG_XEN +/* + * Add a special note telling glibc's dynamic linker a fake hardware + * flavor that it will use to choose the search path for libraries in the + * same way it uses real hardware capabilities like "mmx". + * We supply "nosegneg" as the fake capability, to indicate that we + * do not like negative offsets in instructions using segment overrides, + * since we implement those inefficiently. This makes it possible to + * install libraries optimized to avoid those access patterns in someplace + * like /lib/i686/tls/nosegneg. Note that an /etc/ld.so.conf.d/file + * corresponding to the bits here is needed to make ldconfig work right. + * It should contain: + * hwcap 1 nosegneg + * to match the mapping of bit to name that we give here. + * + * At runtime, the fake hardware feature will be considered to be present + * if its bit is set in the mask word. So, we start with the mask 0, and + * at boot time we set VDSO_NOTE_NONEGSEG_BIT if running under Xen. + */ + +#include "../../x86/xen/vdso.h" /* Defines VDSO_NOTE_NONEGSEG_BIT. */ + + .globl VDSO_NOTE_MASK +ELFNOTE_START(GNU, 2, "a") + .long 1 /* ncaps */ +VDSO_NOTE_MASK: + .long 0 /* mask */ + .byte VDSO_NOTE_NONEGSEG_BIT; .asciz "nosegneg" /* bit, name */ +ELFNOTE_END +#endif diff --git a/arch/x86/kernel/vsyscall-sigreturn_32.S b/arch/x86/kernel/vsyscall-sigreturn_32.S new file mode 100644 index 000000000000..a92262f41659 --- /dev/null +++ b/arch/x86/kernel/vsyscall-sigreturn_32.S @@ -0,0 +1,143 @@ +/* + * Common code for the sigreturn entry points on the vsyscall page. + * So far this code is the same for both int80 and sysenter versions. + * This file is #include'd by vsyscall-*.S to define them after the + * vsyscall entry point. The kernel assumes that the addresses of these + * routines are constant for all vsyscall implementations. + */ + +#include <asm/unistd.h> +#include <asm/asm-offsets.h> + + +/* XXX + Should these be named "_sigtramp" or something? +*/ + + .text + .org __kernel_vsyscall+32,0x90 + .globl __kernel_sigreturn + .type __kernel_sigreturn,@function +__kernel_sigreturn: +.LSTART_sigreturn: + popl %eax /* XXX does this mean it needs unwind info? */ + movl $__NR_sigreturn, %eax + int $0x80 +.LEND_sigreturn: + .size __kernel_sigreturn,.-.LSTART_sigreturn + + .balign 32 + .globl __kernel_rt_sigreturn + .type __kernel_rt_sigreturn,@function +__kernel_rt_sigreturn: +.LSTART_rt_sigreturn: + movl $__NR_rt_sigreturn, %eax + int $0x80 +.LEND_rt_sigreturn: + .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn + .balign 32 + .previous + + .section .eh_frame,"a",@progbits +.LSTARTFRAMEDLSI1: + .long .LENDCIEDLSI1-.LSTARTCIEDLSI1 +.LSTARTCIEDLSI1: + .long 0 /* CIE ID */ + .byte 1 /* Version number */ + .string "zRS" /* NUL-terminated augmentation string */ + .uleb128 1 /* Code alignment factor */ + .sleb128 -4 /* Data alignment factor */ + .byte 8 /* Return address register column */ + .uleb128 1 /* Augmentation value length */ + .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */ + .byte 0 /* DW_CFA_nop */ + .align 4 +.LENDCIEDLSI1: + .long .LENDFDEDLSI1-.LSTARTFDEDLSI1 /* Length FDE */ +.LSTARTFDEDLSI1: + .long .LSTARTFDEDLSI1-.LSTARTFRAMEDLSI1 /* CIE pointer */ + /* HACK: The dwarf2 unwind routines will subtract 1 from the + return address to get an address in the middle of the + presumed call instruction. Since we didn't get here via + a call, we need to include the nop before the real start + to make up for it. */ + .long .LSTART_sigreturn-1-. /* PC-relative start address */ + .long .LEND_sigreturn-.LSTART_sigreturn+1 + .uleb128 0 /* Augmentation */ + /* What follows are the instructions for the table generation. + We record the locations of each register saved. This is + complicated by the fact that the "CFA" is always assumed to + be the value of the stack pointer in the caller. This means + that we must define the CFA of this body of code to be the + saved value of the stack pointer in the sigcontext. Which + also means that there is no fixed relation to the other + saved registers, which means that we must use DW_CFA_expression + to compute their addresses. It also means that when we + adjust the stack with the popl, we have to do it all over again. */ + +#define do_cfa_expr(offset) \ + .byte 0x0f; /* DW_CFA_def_cfa_expression */ \ + .uleb128 1f-0f; /* length */ \ +0: .byte 0x74; /* DW_OP_breg4 */ \ + .sleb128 offset; /* offset */ \ + .byte 0x06; /* DW_OP_deref */ \ +1: + +#define do_expr(regno, offset) \ + .byte 0x10; /* DW_CFA_expression */ \ + .uleb128 regno; /* regno */ \ + .uleb128 1f-0f; /* length */ \ +0: .byte 0x74; /* DW_OP_breg4 */ \ + .sleb128 offset; /* offset */ \ +1: + + do_cfa_expr(SIGCONTEXT_esp+4) + do_expr(0, SIGCONTEXT_eax+4) + do_expr(1, SIGCONTEXT_ecx+4) + do_expr(2, SIGCONTEXT_edx+4) + do_expr(3, SIGCONTEXT_ebx+4) + do_expr(5, SIGCONTEXT_ebp+4) + do_expr(6, SIGCONTEXT_esi+4) + do_expr(7, SIGCONTEXT_edi+4) + do_expr(8, SIGCONTEXT_eip+4) + + .byte 0x42 /* DW_CFA_advance_loc 2 -- nop; popl eax. */ + + do_cfa_expr(SIGCONTEXT_esp) + do_expr(0, SIGCONTEXT_eax) + do_expr(1, SIGCONTEXT_ecx) + do_expr(2, SIGCONTEXT_edx) + do_expr(3, SIGCONTEXT_ebx) + do_expr(5, SIGCONTEXT_ebp) + do_expr(6, SIGCONTEXT_esi) + do_expr(7, SIGCONTEXT_edi) + do_expr(8, SIGCONTEXT_eip) + + .align 4 +.LENDFDEDLSI1: + + .long .LENDFDEDLSI2-.LSTARTFDEDLSI2 /* Length FDE */ +.LSTARTFDEDLSI2: + .long .LSTARTFDEDLSI2-.LSTARTFRAMEDLSI1 /* CIE pointer */ + /* HACK: See above wrt unwind library assumptions. */ + .long .LSTART_rt_sigreturn-1-. /* PC-relative start address */ + .long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1 + .uleb128 0 /* Augmentation */ + /* What follows are the instructions for the table generation. + We record the locations of each register saved. This is + slightly less complicated than the above, since we don't + modify the stack pointer in the process. */ + + do_cfa_expr(RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_esp) + do_expr(0, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_eax) + do_expr(1, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_ecx) + do_expr(2, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_edx) + do_expr(3, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_ebx) + do_expr(5, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_ebp) + do_expr(6, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_esi) + do_expr(7, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_edi) + do_expr(8, RT_SIGFRAME_sigcontext-4 + SIGCONTEXT_eip) + + .align 4 +.LENDFDEDLSI2: + .previous diff --git a/arch/x86/kernel/vsyscall-sysenter_32.S b/arch/x86/kernel/vsyscall-sysenter_32.S new file mode 100644 index 000000000000..ed879bf42995 --- /dev/null +++ b/arch/x86/kernel/vsyscall-sysenter_32.S @@ -0,0 +1,122 @@ +/* + * Code for the vsyscall page. This version uses the sysenter instruction. + * + * NOTE: + * 1) __kernel_vsyscall _must_ be first in this page. + * 2) there are alignment constraints on this stub, see vsyscall-sigreturn.S + * for details. + */ + +/* + * The caller puts arg2 in %ecx, which gets pushed. The kernel will use + * %ecx itself for arg2. The pushing is because the sysexit instruction + * (found in entry.S) requires that we clobber %ecx with the desired %esp. + * User code might expect that %ecx is unclobbered though, as it would be + * for returning via the iret instruction, so we must push and pop. + * + * The caller puts arg3 in %edx, which the sysexit instruction requires + * for %eip. Thus, exactly as for arg2, we must push and pop. + * + * Arg6 is different. The caller puts arg6 in %ebp. Since the sysenter + * instruction clobbers %esp, the user's %esp won't even survive entry + * into the kernel. We store %esp in %ebp. Code in entry.S must fetch + * arg6 from the stack. + * + * You can not use this vsyscall for the clone() syscall because the + * three dwords on the parent stack do not get copied to the child. + */ + .text + .globl __kernel_vsyscall + .type __kernel_vsyscall,@function +__kernel_vsyscall: +.LSTART_vsyscall: + push %ecx +.Lpush_ecx: + push %edx +.Lpush_edx: + push %ebp +.Lenter_kernel: + movl %esp,%ebp + sysenter + + /* 7: align return point with nop's to make disassembly easier */ + .space 7,0x90 + + /* 14: System call restart point is here! (SYSENTER_RETURN-2) */ + jmp .Lenter_kernel + /* 16: System call normal return point is here! */ + .globl SYSENTER_RETURN /* Symbol used by sysenter.c */ +SYSENTER_RETURN: + pop %ebp +.Lpop_ebp: + pop %edx +.Lpop_edx: + pop %ecx +.Lpop_ecx: + ret +.LEND_vsyscall: + .size __kernel_vsyscall,.-.LSTART_vsyscall + .previous + + .section .eh_frame,"a",@progbits +.LSTARTFRAMEDLSI: + .long .LENDCIEDLSI-.LSTARTCIEDLSI +.LSTARTCIEDLSI: + .long 0 /* CIE ID */ + .byte 1 /* Version number */ + .string "zR" /* NUL-terminated augmentation string */ + .uleb128 1 /* Code alignment factor */ + .sleb128 -4 /* Data alignment factor */ + .byte 8 /* Return address register column */ + .uleb128 1 /* Augmentation value length */ + .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */ + .byte 0x0c /* DW_CFA_def_cfa */ + .uleb128 4 + .uleb128 4 + .byte 0x88 /* DW_CFA_offset, column 0x8 */ + .uleb128 1 + .align 4 +.LENDCIEDLSI: + .long .LENDFDEDLSI-.LSTARTFDEDLSI /* Length FDE */ +.LSTARTFDEDLSI: + .long .LSTARTFDEDLSI-.LSTARTFRAMEDLSI /* CIE pointer */ + .long .LSTART_vsyscall-. /* PC-relative start address */ + .long .LEND_vsyscall-.LSTART_vsyscall + .uleb128 0 + /* What follows are the instructions for the table generation. + We have to record all changes of the stack pointer. */ + .byte 0x04 /* DW_CFA_advance_loc4 */ + .long .Lpush_ecx-.LSTART_vsyscall + .byte 0x0e /* DW_CFA_def_cfa_offset */ + .byte 0x08 /* RA at offset 8 now */ + .byte 0x04 /* DW_CFA_advance_loc4 */ + .long .Lpush_edx-.Lpush_ecx + .byte 0x0e /* DW_CFA_def_cfa_offset */ + .byte 0x0c /* RA at offset 12 now */ + .byte 0x04 /* DW_CFA_advance_loc4 */ + .long .Lenter_kernel-.Lpush_edx + .byte 0x0e /* DW_CFA_def_cfa_offset */ + .byte 0x10 /* RA at offset 16 now */ + .byte 0x85, 0x04 /* DW_CFA_offset %ebp -16 */ + /* Finally the epilogue. */ + .byte 0x04 /* DW_CFA_advance_loc4 */ + .long .Lpop_ebp-.Lenter_kernel + .byte 0x0e /* DW_CFA_def_cfa_offset */ + .byte 0x0c /* RA at offset 12 now */ + .byte 0xc5 /* DW_CFA_restore %ebp */ + .byte 0x04 /* DW_CFA_advance_loc4 */ + .long .Lpop_edx-.Lpop_ebp + .byte 0x0e /* DW_CFA_def_cfa_offset */ + .byte 0x08 /* RA at offset 8 now */ + .byte 0x04 /* DW_CFA_advance_loc4 */ + .long .Lpop_ecx-.Lpop_edx + .byte 0x0e /* DW_CFA_def_cfa_offset */ + .byte 0x04 /* RA at offset 4 now */ + .align 4 +.LENDFDEDLSI: + .previous + +/* + * Get the common code for the sigreturn entry points. + */ +#include "vsyscall-sigreturn_32.S" diff --git a/arch/x86/kernel/vsyscall_32.S b/arch/x86/kernel/vsyscall_32.S new file mode 100644 index 000000000000..a5ab3dc4fd25 --- /dev/null +++ b/arch/x86/kernel/vsyscall_32.S @@ -0,0 +1,15 @@ +#include <linux/init.h> + +__INITDATA + + .globl vsyscall_int80_start, vsyscall_int80_end +vsyscall_int80_start: + .incbin "arch/x86/kernel/vsyscall-int80_32.so" +vsyscall_int80_end: + + .globl vsyscall_sysenter_start, vsyscall_sysenter_end +vsyscall_sysenter_start: + .incbin "arch/x86/kernel/vsyscall-sysenter_32.so" +vsyscall_sysenter_end: + +__FINIT diff --git a/arch/x86/kernel/vsyscall_32.lds.S b/arch/x86/kernel/vsyscall_32.lds.S new file mode 100644 index 000000000000..4a8b0ed9b8fb --- /dev/null +++ b/arch/x86/kernel/vsyscall_32.lds.S @@ -0,0 +1,67 @@ +/* + * Linker script for vsyscall DSO. The vsyscall page is an ELF shared + * object prelinked to its virtual address, and with only one read-only + * segment (that fits in one page). This script controls its layout. + */ +#include <asm/asm-offsets.h> + +SECTIONS +{ + . = VDSO_PRELINK_asm + SIZEOF_HEADERS; + + .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .gnu.version : { *(.gnu.version) } + .gnu.version_d : { *(.gnu.version_d) } + .gnu.version_r : { *(.gnu.version_r) } + + /* This linker script is used both with -r and with -shared. + For the layouts to match, we need to skip more than enough + space for the dynamic symbol table et al. If this amount + is insufficient, ld -shared will barf. Just increase it here. */ + . = VDSO_PRELINK_asm + 0x400; + + .text : { *(.text) } :text =0x90909090 + .note : { *(.note.*) } :text :note + .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr + .eh_frame : { KEEP (*(.eh_frame)) } :text + .dynamic : { *(.dynamic) } :text :dynamic + .useless : { + *(.got.plt) *(.got) + *(.data .data.* .gnu.linkonce.d.*) + *(.dynbss) + *(.bss .bss.* .gnu.linkonce.b.*) + } :text +} + +/* + * We must supply the ELF program headers explicitly to get just one + * PT_LOAD segment, and set the flags explicitly to make segments read-only. + */ +PHDRS +{ + text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */ + dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ + note PT_NOTE FLAGS(4); /* PF_R */ + eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */ +} + +/* + * This controls what symbols we export from the DSO. + */ +VERSION +{ + LINUX_2.5 { + global: + __kernel_vsyscall; + __kernel_sigreturn; + __kernel_rt_sigreturn; + + local: *; + }; +} + +/* The ELF entry point can be used to set the AT_SYSINFO value. */ +ENTRY(__kernel_vsyscall); diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c new file mode 100644 index 000000000000..06c34949bfdc --- /dev/null +++ b/arch/x86/kernel/vsyscall_64.c @@ -0,0 +1,349 @@ +/* + * linux/arch/x86_64/kernel/vsyscall.c + * + * Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE + * Copyright 2003 Andi Kleen, SuSE Labs. + * + * Thanks to hpa@transmeta.com for some useful hint. + * Special thanks to Ingo Molnar for his early experience with + * a different vsyscall implementation for Linux/IA32 and for the name. + * + * vsyscall 1 is located at -10Mbyte, vsyscall 2 is located + * at virtual address -10Mbyte+1024bytes etc... There are at max 4 + * vsyscalls. One vsyscall can reserve more than 1 slot to avoid + * jumping out of line if necessary. We cannot add more with this + * mechanism because older kernels won't return -ENOSYS. + * If we want more than four we need a vDSO. + * + * Note: the concept clashes with user mode linux. If you use UML and + * want per guest time just set the kernel.vsyscall64 sysctl to 0. + */ + +#include <linux/time.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/seqlock.h> +#include <linux/jiffies.h> +#include <linux/sysctl.h> +#include <linux/clocksource.h> +#include <linux/getcpu.h> +#include <linux/cpu.h> +#include <linux/smp.h> +#include <linux/notifier.h> + +#include <asm/vsyscall.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/unistd.h> +#include <asm/fixmap.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/segment.h> +#include <asm/desc.h> +#include <asm/topology.h> +#include <asm/vgtod.h> + +#define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr))) +#define __syscall_clobber "r11","rcx","memory" +#define __pa_vsymbol(x) \ + ({unsigned long v; \ + extern char __vsyscall_0; \ + asm("" : "=r" (v) : "0" (x)); \ + ((v - VSYSCALL_FIRST_PAGE) + __pa_symbol(&__vsyscall_0)); }) + +/* + * vsyscall_gtod_data contains data that is : + * - readonly from vsyscalls + * - writen by timer interrupt or systcl (/proc/sys/kernel/vsyscall64) + * Try to keep this structure as small as possible to avoid cache line ping pongs + */ +int __vgetcpu_mode __section_vgetcpu_mode; + +struct vsyscall_gtod_data __vsyscall_gtod_data __section_vsyscall_gtod_data = +{ + .lock = SEQLOCK_UNLOCKED, + .sysctl_enabled = 1, +}; + +void update_vsyscall(struct timespec *wall_time, struct clocksource *clock) +{ + unsigned long flags; + + write_seqlock_irqsave(&vsyscall_gtod_data.lock, flags); + /* copy vsyscall data */ + vsyscall_gtod_data.clock.vread = clock->vread; + vsyscall_gtod_data.clock.cycle_last = clock->cycle_last; + vsyscall_gtod_data.clock.mask = clock->mask; + vsyscall_gtod_data.clock.mult = clock->mult; + vsyscall_gtod_data.clock.shift = clock->shift; + vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec; + vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec; + vsyscall_gtod_data.sys_tz = sys_tz; + vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec; + vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic; + write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags); +} + +/* RED-PEN may want to readd seq locking, but then the variable should be + * write-once. + */ +static __always_inline void do_get_tz(struct timezone * tz) +{ + *tz = __vsyscall_gtod_data.sys_tz; +} + +static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz) +{ + int ret; + asm volatile("vsysc2: syscall" + : "=a" (ret) + : "0" (__NR_gettimeofday),"D" (tv),"S" (tz) + : __syscall_clobber ); + return ret; +} + +static __always_inline long time_syscall(long *t) +{ + long secs; + asm volatile("vsysc1: syscall" + : "=a" (secs) + : "0" (__NR_time),"D" (t) : __syscall_clobber); + return secs; +} + +static __always_inline void do_vgettimeofday(struct timeval * tv) +{ + cycle_t now, base, mask, cycle_delta; + unsigned seq; + unsigned long mult, shift, nsec; + cycle_t (*vread)(void); + do { + seq = read_seqbegin(&__vsyscall_gtod_data.lock); + + vread = __vsyscall_gtod_data.clock.vread; + if (unlikely(!__vsyscall_gtod_data.sysctl_enabled || !vread)) { + gettimeofday(tv,NULL); + return; + } + now = vread(); + base = __vsyscall_gtod_data.clock.cycle_last; + mask = __vsyscall_gtod_data.clock.mask; + mult = __vsyscall_gtod_data.clock.mult; + shift = __vsyscall_gtod_data.clock.shift; + + tv->tv_sec = __vsyscall_gtod_data.wall_time_sec; + nsec = __vsyscall_gtod_data.wall_time_nsec; + } while (read_seqretry(&__vsyscall_gtod_data.lock, seq)); + + /* calculate interval: */ + cycle_delta = (now - base) & mask; + /* convert to nsecs: */ + nsec += (cycle_delta * mult) >> shift; + + while (nsec >= NSEC_PER_SEC) { + tv->tv_sec += 1; + nsec -= NSEC_PER_SEC; + } + tv->tv_usec = nsec / NSEC_PER_USEC; +} + +int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz) +{ + if (tv) + do_vgettimeofday(tv); + if (tz) + do_get_tz(tz); + return 0; +} + +/* This will break when the xtime seconds get inaccurate, but that is + * unlikely */ +time_t __vsyscall(1) vtime(time_t *t) +{ + struct timeval tv; + time_t result; + if (unlikely(!__vsyscall_gtod_data.sysctl_enabled)) + return time_syscall(t); + + vgettimeofday(&tv, 0); + result = tv.tv_sec; + if (t) + *t = result; + return result; +} + +/* Fast way to get current CPU and node. + This helps to do per node and per CPU caches in user space. + The result is not guaranteed without CPU affinity, but usually + works out because the scheduler tries to keep a thread on the same + CPU. + + tcache must point to a two element sized long array. + All arguments can be NULL. */ +long __vsyscall(2) +vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) +{ + unsigned int dummy, p; + unsigned long j = 0; + + /* Fast cache - only recompute value once per jiffies and avoid + relatively costly rdtscp/cpuid otherwise. + This works because the scheduler usually keeps the process + on the same CPU and this syscall doesn't guarantee its + results anyways. + We do this here because otherwise user space would do it on + its own in a likely inferior way (no access to jiffies). + If you don't like it pass NULL. */ + if (tcache && tcache->blob[0] == (j = __jiffies)) { + p = tcache->blob[1]; + } else if (__vgetcpu_mode == VGETCPU_RDTSCP) { + /* Load per CPU data from RDTSCP */ + rdtscp(dummy, dummy, p); + } else { + /* Load per CPU data from GDT */ + asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG)); + } + if (tcache) { + tcache->blob[0] = j; + tcache->blob[1] = p; + } + if (cpu) + *cpu = p & 0xfff; + if (node) + *node = p >> 12; + return 0; +} + +long __vsyscall(3) venosys_1(void) +{ + return -ENOSYS; +} + +#ifdef CONFIG_SYSCTL + +#define SYSCALL 0x050f +#define NOP2 0x9090 + +/* + * NOP out syscall in vsyscall page when not needed. + */ +static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + extern u16 vsysc1, vsysc2; + u16 __iomem *map1; + u16 __iomem *map2; + int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos); + if (!write) + return ret; + /* gcc has some trouble with __va(__pa()), so just do it this + way. */ + map1 = ioremap(__pa_vsymbol(&vsysc1), 2); + if (!map1) + return -ENOMEM; + map2 = ioremap(__pa_vsymbol(&vsysc2), 2); + if (!map2) { + ret = -ENOMEM; + goto out; + } + if (!vsyscall_gtod_data.sysctl_enabled) { + writew(SYSCALL, map1); + writew(SYSCALL, map2); + } else { + writew(NOP2, map1); + writew(NOP2, map2); + } + iounmap(map2); +out: + iounmap(map1); + return ret; +} + +static int vsyscall_sysctl_nostrat(ctl_table *t, int __user *name, int nlen, + void __user *oldval, size_t __user *oldlenp, + void __user *newval, size_t newlen) +{ + return -ENOSYS; +} + +static ctl_table kernel_table2[] = { + { .ctl_name = 99, .procname = "vsyscall64", + .data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int), + .mode = 0644, + .strategy = vsyscall_sysctl_nostrat, + .proc_handler = vsyscall_sysctl_change }, + {} +}; + +static ctl_table kernel_root_table2[] = { + { .ctl_name = CTL_KERN, .procname = "kernel", .mode = 0555, + .child = kernel_table2 }, + {} +}; + +#endif + +/* Assume __initcall executes before all user space. Hopefully kmod + doesn't violate that. We'll find out if it does. */ +static void __cpuinit vsyscall_set_cpu(int cpu) +{ + unsigned long *d; + unsigned long node = 0; +#ifdef CONFIG_NUMA + node = cpu_to_node[cpu]; +#endif + if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP)) + write_rdtscp_aux((node << 12) | cpu); + + /* Store cpu number in limit so that it can be loaded quickly + in user space in vgetcpu. + 12 bits for the CPU and 8 bits for the node. */ + d = (unsigned long *)(cpu_gdt(cpu) + GDT_ENTRY_PER_CPU); + *d = 0x0f40000000000ULL; + *d |= cpu; + *d |= (node & 0xf) << 12; + *d |= (node >> 4) << 48; +} + +static void __cpuinit cpu_vsyscall_init(void *arg) +{ + /* preemption should be already off */ + vsyscall_set_cpu(raw_smp_processor_id()); +} + +static int __cpuinit +cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg) +{ + long cpu = (long)arg; + if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN) + smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 0, 1); + return NOTIFY_DONE; +} + +static void __init map_vsyscall(void) +{ + extern char __vsyscall_0; + unsigned long physaddr_page0 = __pa_symbol(&__vsyscall_0); + + /* Note that VSYSCALL_MAPPED_PAGES must agree with the code below. */ + __set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_page0, PAGE_KERNEL_VSYSCALL); +} + +static int __init vsyscall_init(void) +{ + BUG_ON(((unsigned long) &vgettimeofday != + VSYSCALL_ADDR(__NR_vgettimeofday))); + BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime)); + BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE))); + BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu)); + map_vsyscall(); +#ifdef CONFIG_SYSCTL + register_sysctl_table(kernel_root_table2); +#endif + on_each_cpu(cpu_vsyscall_init, NULL, 0, 1); + hotcpu_notifier(cpu_vsyscall_notifier, 0); + return 0; +} + +__initcall(vsyscall_init); diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c new file mode 100644 index 000000000000..77c25b307635 --- /dev/null +++ b/arch/x86/kernel/x8664_ksyms_64.c @@ -0,0 +1,62 @@ +/* Exports for assembly files. + All C exports should go in the respective C files. */ + +#include <linux/module.h> +#include <linux/smp.h> + +#include <asm/semaphore.h> +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> + +EXPORT_SYMBOL(kernel_thread); + +EXPORT_SYMBOL(__down_failed); +EXPORT_SYMBOL(__down_failed_interruptible); +EXPORT_SYMBOL(__down_failed_trylock); +EXPORT_SYMBOL(__up_wakeup); + +EXPORT_SYMBOL(__get_user_1); +EXPORT_SYMBOL(__get_user_2); +EXPORT_SYMBOL(__get_user_4); +EXPORT_SYMBOL(__get_user_8); +EXPORT_SYMBOL(__put_user_1); +EXPORT_SYMBOL(__put_user_2); +EXPORT_SYMBOL(__put_user_4); +EXPORT_SYMBOL(__put_user_8); + +EXPORT_SYMBOL(copy_user_generic); +EXPORT_SYMBOL(__copy_user_nocache); +EXPORT_SYMBOL(copy_from_user); +EXPORT_SYMBOL(copy_to_user); +EXPORT_SYMBOL(__copy_from_user_inatomic); + +EXPORT_SYMBOL(copy_page); +EXPORT_SYMBOL(clear_page); + +#ifdef CONFIG_SMP +extern void __write_lock_failed(rwlock_t *rw); +extern void __read_lock_failed(rwlock_t *rw); +EXPORT_SYMBOL(__write_lock_failed); +EXPORT_SYMBOL(__read_lock_failed); +#endif + +/* Export string functions. We normally rely on gcc builtin for most of these, + but gcc sometimes decides not to inline them. */ +#undef memcpy +#undef memset +#undef memmove + +extern void * memset(void *,int,__kernel_size_t); +extern void * memcpy(void *,const void *,__kernel_size_t); +extern void * __memcpy(void *,const void *,__kernel_size_t); + +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(__memcpy); + +EXPORT_SYMBOL(empty_zero_page); +EXPORT_SYMBOL(init_level4_pgt); +EXPORT_SYMBOL(load_gs_index); + +EXPORT_SYMBOL(_proxy_pda); |