diff options
Diffstat (limited to 'arch/tile')
| -rw-r--r-- | arch/tile/Kconfig | 12 | ||||
| -rw-r--r-- | arch/tile/include/asm/io.h | 15 | ||||
| -rw-r--r-- | arch/tile/include/asm/pci-bridge.h | 117 | ||||
| -rw-r--r-- | arch/tile/include/asm/pci.h | 107 | ||||
| -rw-r--r-- | arch/tile/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/tile/kernel/pci.c | 621 |
6 files changed, 686 insertions, 187 deletions
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 07ec8a865c1d..e11b5fcb70eb 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -329,6 +329,18 @@ endmenu # Tilera-specific configuration menu "Bus options" +config PCI + bool "PCI support" + default y + select PCI_DOMAINS + ---help--- + Enable PCI root complex support, so PCIe endpoint devices can + be attached to the Tile chip. Many, but not all, PCI devices + are supported under Tilera's root complex driver. + +config PCI_DOMAINS + bool + config NO_IOMEM def_bool !PCI diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h index ee43328713ab..d3cbb9b14cbe 100644 --- a/arch/tile/include/asm/io.h +++ b/arch/tile/include/asm/io.h @@ -55,9 +55,6 @@ extern void iounmap(volatile void __iomem *addr); #define ioremap_writethrough(physaddr, size) ioremap(physaddr, size) #define ioremap_fullcache(physaddr, size) ioremap(physaddr, size) -void __iomem *ioport_map(unsigned long port, unsigned int len); -extern inline void ioport_unmap(void __iomem *addr) {} - #define mmiowb() /* Conversion between virtual and physical mappings. */ @@ -189,12 +186,22 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, * we never run, uses them unconditionally. */ -static inline int ioport_panic(void) +static inline long ioport_panic(void) { panic("inb/outb and friends do not exist on tile"); return 0; } +static inline void __iomem *ioport_map(unsigned long port, unsigned int len) +{ + return (void __iomem *) ioport_panic(); +} + +static inline void ioport_unmap(void __iomem *addr) +{ + ioport_panic(); +} + static inline u8 inb(unsigned long addr) { return ioport_panic(); diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h deleted file mode 100644 index e853b0e2793b..000000000000 --- a/arch/tile/include/asm/pci-bridge.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PCI_BRIDGE_H -#define _ASM_TILE_PCI_BRIDGE_H - -#include <linux/ioport.h> -#include <linux/pci.h> - -struct device_node; -struct pci_controller; - -/* - * pci_io_base returns the memory address at which you can access - * the I/O space for PCI bus number `bus' (or NULL on error). - */ -extern void __iomem *pci_bus_io_base(unsigned int bus); -extern unsigned long pci_bus_io_base_phys(unsigned int bus); -extern unsigned long pci_bus_mem_base_phys(unsigned int bus); - -/* Allocate a new PCI host bridge structure */ -extern struct pci_controller *pcibios_alloc_controller(void); - -/* Helper function for setting up resources */ -extern void pci_init_resource(struct resource *res, unsigned long start, - unsigned long end, int flags, char *name); - -/* Get the PCI host controller for a bus */ -extern struct pci_controller *pci_bus_to_hose(int bus); - -/* - * Structure of a PCI controller (host bridge) - */ -struct pci_controller { - int index; /* PCI domain number */ - struct pci_bus *root_bus; - - int first_busno; - int last_busno; - - int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */ - int hv_mem_fd; /* fd to Hypervisor for MMIO operations */ - - struct pci_ops *ops; - - int irq_base; /* Base IRQ from the Hypervisor */ - int plx_gen1; /* flag for PLX Gen 1 configuration */ - - /* Address ranges that are routed to this controller/bridge. */ - struct resource mem_resources[3]; -}; - -static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus) -{ - return bus->sysdata; -} - -extern void setup_indirect_pci_nomap(struct pci_controller *hose, - void __iomem *cfg_addr, void __iomem *cfg_data); -extern void setup_indirect_pci(struct pci_controller *hose, - u32 cfg_addr, u32 cfg_data); -extern void setup_grackle(struct pci_controller *hose); - -extern unsigned char common_swizzle(struct pci_dev *, unsigned char *); - -/* - * The following code swizzles for exactly one bridge. The routine - * common_swizzle below handles multiple bridges. But there are a - * some boards that don't follow the PCI spec's suggestion so we - * break this piece out separately. - */ -static inline unsigned char bridge_swizzle(unsigned char pin, - unsigned char idsel) -{ - return (((pin-1) + idsel) % 4) + 1; -} - -/* - * The following macro is used to lookup irqs in a standard table - * format for those PPC systems that do not already have PCI - * interrupts properly routed. - */ -/* FIXME - double check this */ -#define PCI_IRQ_TABLE_LOOKUP ({ \ - long _ctl_ = -1; \ - if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \ - _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \ - _ctl_; \ -}) - -/* - * Scan the buses below a given PCI host bridge and assign suitable - * resources to all devices found. - */ -extern int pciauto_bus_scan(struct pci_controller *, int); - -#ifdef CONFIG_PCI -extern unsigned long pci_address_to_pio(phys_addr_t address); -#else -static inline unsigned long pci_address_to_pio(phys_addr_t address) -{ - return (unsigned long)-1; -} -#endif - -#endif /* _ASM_TILE_PCI_BRIDGE_H */ diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index b0c15da2d5d5..c3fc458a0d32 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -15,7 +15,29 @@ #ifndef _ASM_TILE_PCI_H #define _ASM_TILE_PCI_H -#include <asm/pci-bridge.h> +#include <linux/pci.h> + +/* + * Structure of a PCI controller (host bridge) + */ +struct pci_controller { + int index; /* PCI domain number */ + struct pci_bus *root_bus; + + int first_busno; + int last_busno; + + int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */ + int hv_mem_fd; /* fd to Hypervisor for MMIO operations */ + + struct pci_ops *ops; + + int irq_base; /* Base IRQ from the Hypervisor */ + int plx_gen1; /* flag for PLX Gen 1 configuration */ + + /* Address ranges that are routed to this controller/bridge. */ + struct resource mem_resources[3]; +}; /* * The hypervisor maps the entirety of CPA-space as bus addresses, so @@ -24,56 +46,12 @@ */ #define PCI_DMA_BUS_IS_PHYS 1 -struct pci_controller *pci_bus_to_hose(int bus); -unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp); int __init tile_pci_init(void); -void pci_iounmap(struct pci_dev *dev, void __iomem *addr); -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); -void __devinit pcibios_fixup_bus(struct pci_bus *bus); -int __devinit _tile_cfg_read(struct pci_controller *hose, - int bus, - int slot, - int function, - int offset, - int size, - u32 *val); -int __devinit _tile_cfg_write(struct pci_controller *hose, - int bus, - int slot, - int function, - int offset, - int size, - u32 val); +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} -/* - * These are used to to config reads and writes in the early stages of - * setup before the driver infrastructure has been set up enough to be - * able to do config reads and writes. - */ -#define early_cfg_read(where, size, value) \ - _tile_cfg_read(controller, \ - current_bus, \ - pci_slot, \ - pci_fn, \ - where, \ - size, \ - value) - -#define early_cfg_write(where, size, value) \ - _tile_cfg_write(controller, \ - current_bus, \ - pci_slot, \ - pci_fn, \ - where, \ - size, \ - value) - - - -#define PCICFG_BYTE 1 -#define PCICFG_WORD 2 -#define PCICFG_DWORD 4 +void __devinit pcibios_fixup_bus(struct pci_bus *bus); #define TILE_NUM_PCIE 2 @@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus) } /* - * I/O space is currently not supported. + * pcibios_assign_all_busses() tells whether or not the bus numbers + * should be reassigned, in case the BIOS didn't do it correctly, or + * in case we don't have a BIOS and we want to let Linux do it. */ +static inline int pcibios_assign_all_busses(void) +{ + return 1; +} -#define TILE_PCIE_LOWER_IO 0x0 -#define TILE_PCIE_UPPER_IO 0x10000 -#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF - -#define _PAGE_NO_CACHE 0 -#define _PAGE_GUARDED 0 - - -#define pcibios_assign_all_busses() pci_assign_all_buses -extern int pci_assign_all_buses; - +/* + * No special bus mastering setup handling. + */ static inline void pcibios_set_master(struct pci_dev *dev) { - /* No special bus mastering setup handling */ } #define PCIBIOS_MIN_MEM 0 -#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO +#define PCIBIOS_MIN_IO 0 /* * This flag tells if the platform is TILEmpower that needs * special configuration for the PLX switch chip. */ -extern int blade_pci; +extern int tile_plx_gen1; + +/* Use any cpu for PCI. */ +#define cpumask_of_pcibus(bus) cpu_online_mask /* implement the pci_ DMA API in terms of the generic device dma_ one */ #include <asm-generic/pci-dma-compat.h> @@ -122,7 +100,4 @@ extern int blade_pci; /* generic pci stuff */ #include <asm-generic/pci.h> -/* Use any cpu for PCI. */ -#define cpumask_of_pcibus(bus) cpu_online_mask - #endif /* _ASM_TILE_PCI_H */ diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile index 112b1e248f05..b4c8e8ec45dc 100644 --- a/arch/tile/kernel/Makefile +++ b/arch/tile/kernel/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_PCI) += pci.o diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c new file mode 100644 index 000000000000..a1ee25be9ad9 --- /dev/null +++ b/arch/tile/kernel/pci.c @@ -0,0 +1,621 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/capability.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/bootmem.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#include <asm/processor.h> +#include <asm/sections.h> +#include <asm/byteorder.h> +#include <asm/hv_driver.h> +#include <hv/drv_pcie_rc_intf.h> + + +/* + * Initialization flow and process + * ------------------------------- + * + * This files containes the routines to search for PCI buses, + * enumerate the buses, and configure any attached devices. + * + * There are two entry points here: + * 1) tile_pci_init + * This sets up the pci_controller structs, and opens the + * FDs to the hypervisor. This is called from setup_arch() early + * in the boot process. + * 2) pcibios_init + * This probes the PCI bus(es) for any attached hardware. It's + * called by subsys_initcall. All of the real work is done by the + * generic Linux PCI layer. + * + */ + +/* + * This flag tells if the platform is TILEmpower that needs + * special configuration for the PLX switch chip. + */ +int __write_once tile_plx_gen1; + +static struct pci_controller controllers[TILE_NUM_PCIE]; +static int num_controllers; + +static struct pci_ops tile_cfg_ops; + + +/* + * We don't need to worry about the alignment of resources. + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + return res->start; +} +EXPORT_SYMBOL(pcibios_align_resource); + +/* + * Open a FD to the hypervisor PCI device. + * + * controller_id is the controller number, config type is 0 or 1 for + * config0 or config1 operations. + */ +static int __init tile_pcie_open(int controller_id, int config_type) +{ + char filename[32]; + int fd; + + sprintf(filename, "pcie/%d/config%d", controller_id, config_type); + + fd = hv_dev_open((HV_VirtAddr)filename, 0); + + return fd; +} + + +/* + * Get the IRQ numbers from the HV and set up the handlers for them. + */ +static int __init tile_init_irqs(int controller_id, + struct pci_controller *controller) +{ + char filename[32]; + int fd; + int ret; + int x; + struct pcie_rc_config rc_config; + + sprintf(filename, "pcie/%d/ctl", controller_id); + fd = hv_dev_open((HV_VirtAddr)filename, 0); + if (fd < 0) { + pr_err("PCI: hv_dev_open(%s) failed\n", filename); + return -1; + } + ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config), + sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF); + hv_dev_close(fd); + if (ret != sizeof(rc_config)) { + pr_err("PCI: wanted %zd bytes, got %d\n", + sizeof(rc_config), ret); + return -1; + } + /* Record irq_base so that we can map INTx to IRQ # later. */ + controller->irq_base = rc_config.intr; + + for (x = 0; x < 4; x++) + tile_irq_activate(rc_config.intr + x, + TILE_IRQ_HW_CLEAR); + + if (rc_config.plx_gen1) + controller->plx_gen1 = 1; + + return 0; +} + +/* + * First initialization entry point, called from setup_arch(). + * + * Find valid controllers and fill in pci_controller structs for each + * of them. + * + * Returns the number of controllers discovered. + */ +int __init tile_pci_init(void) +{ + int i; + + pr_info("PCI: Searching for controllers...\n"); + + /* Do any configuration we need before using the PCIe */ + + for (i = 0; i < TILE_NUM_PCIE; i++) { + int hv_cfg_fd0 = -1; + int hv_cfg_fd1 = -1; + int hv_mem_fd = -1; + char name[32]; + struct pci_controller *controller; + + /* + * Open the fd to the HV. If it fails then this + * device doesn't exist. + */ + hv_cfg_fd0 = tile_pcie_open(i, 0); + if (hv_cfg_fd0 < 0) + continue; + hv_cfg_fd1 = tile_pcie_open(i, 1); + if (hv_cfg_fd1 < 0) { + pr_err("PCI: Couldn't open config fd to HV " + "for controller %d\n", i); + goto err_cont; + } + + sprintf(name, "pcie/%d/mem", i); + hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0); + if (hv_mem_fd < 0) { + pr_err("PCI: Could not open mem fd to HV!\n"); + goto err_cont; + } + + pr_info("PCI: Found PCI controller #%d\n", i); + + controller = &controllers[num_controllers]; + + if (tile_init_irqs(i, controller)) { + pr_err("PCI: Could not initialize " + "IRQs, aborting.\n"); + goto err_cont; + } + + controller->index = num_controllers; + controller->hv_cfg_fd[0] = hv_cfg_fd0; + controller->hv_cfg_fd[1] = hv_cfg_fd1; + controller->hv_mem_fd = hv_mem_fd; + controller->first_busno = 0; + controller->last_busno = 0xff; + controller->ops = &tile_cfg_ops; + + num_controllers++; + continue; + +err_cont: + if (hv_cfg_fd0 >= 0) + hv_dev_close(hv_cfg_fd0); + if (hv_cfg_fd1 >= 0) + hv_dev_close(hv_cfg_fd1); + if (hv_mem_fd >= 0) + hv_dev_close(hv_mem_fd); + continue; + } + + /* + * Before using the PCIe, see if we need to do any platform-specific + * configuration, such as the PLX switch Gen 1 issue on TILEmpower. + */ + for (i = 0; i < num_controllers; i++) { + struct pci_controller *controller = &controllers[i]; + + if (controller->plx_gen1) + tile_plx_gen1 = 1; + } + + return num_controllers; +} + +/* + * (pin - 1) converts from the PCI standard's [1:4] convention to + * a normal [0:3] range. + */ +static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + struct pci_controller *controller = + (struct pci_controller *)dev->sysdata; + return (pin - 1) + controller->irq_base; +} + + +static void __init fixup_read_and_payload_sizes(void) +{ + struct pci_dev *dev = NULL; + int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */ + int max_read_size = 0x2; /* Limit to 512 byte reads. */ + u16 new_values; + + /* Scan for the smallest maximum payload size. */ + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + int pcie_caps_offset; + u32 devcap; + int max_payload; + + pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pcie_caps_offset == 0) + continue; + + pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP, + &devcap); + max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD; + if (max_payload < smallest_max_payload) + smallest_max_payload = max_payload; + } + + /* Now, set the max_payload_size for all devices to that value. */ + new_values = (max_read_size << 12) | (smallest_max_payload << 5); + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + int pcie_caps_offset; + u16 devctl; + + pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pcie_caps_offset == 0) + continue; + + pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL, + &devctl); + devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ); + devctl |= new_values; + pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL, + devctl); + } +} + + +/* + * Second PCI initialization entry point, called by subsys_initcall. + * + * The controllers have been set up by the time we get here, by a call to + * tile_pci_init. + */ +static int __init pcibios_init(void) +{ + int i; + + pr_info("PCI: Probing PCI hardware\n"); + + /* + * Delay a bit in case devices aren't ready. Some devices are + * known to require at least 20ms here, but we use a more + * conservative value. + */ + mdelay(250); + + /* Scan all of the recorded PCI controllers. */ + for (i = 0; i < num_controllers; i++) { + struct pci_controller *controller = &controllers[i]; + struct pci_bus *bus; + + pr_info("PCI: initializing controller #%d\n", i); + + /* + * This comes from the generic Linux PCI driver. + * + * It reads the PCI tree for this bus into the Linux + * data structures. + * + * This is inlined in linux/pci.h and calls into + * pci_scan_bus_parented() in probe.c. + */ + bus = pci_scan_bus(0, controller->ops, controller); + controller->root_bus = bus; + controller->last_busno = bus->subordinate; + + } + + /* Do machine dependent PCI interrupt routing */ + pci_fixup_irqs(pci_common_swizzle, tile_map_irq); + + /* + * This comes from the generic Linux PCI driver. + * + * It allocates all of the resources (I/O memory, etc) + * associated with the devices read in above. + */ + + pci_assign_unassigned_resources(); + + /* Configure the max_read_size and max_payload_size values. */ + fixup_read_and_payload_sizes(); + + /* Record the I/O resources in the PCI controller structure. */ + for (i = 0; i < num_controllers; i++) { + struct pci_bus *root_bus = controllers[i].root_bus; + struct pci_bus *next_bus; + struct pci_dev *dev; + + list_for_each_entry(dev, &root_bus->devices, bus_list) { + /* Find the PCI host controller, ie. the 1st bridge. */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && + (PCI_SLOT(dev->devfn) == 0)) { + next_bus = dev->subordinate; + controllers[i].mem_resources[0] = + *next_bus->resource[0]; + controllers[i].mem_resources[1] = + *next_bus->resource[1]; + controllers[i].mem_resources[2] = + *next_bus->resource[2]; + + break; + } + } + + } + + return 0; +} +subsys_initcall(pcibios_init); + +/* + * No bus fixups needed. + */ +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + /* Nothing needs to be done. */ +} + +/* + * This can be called from the generic PCI layer, but doesn't need to + * do anything. + */ +char __devinit *pcibios_setup(char *str) +{ + /* Nothing needs to be done. */ + return str; +} + +/* + * This is called from the generic Linux layer. + */ +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +/* + * Enable memory and/or address decoding, as appropriate, for the + * device described by the 'dev' struct. + * + * This is called from the generic PCI layer, and can be called + * for bridges or endpoints. + */ +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + u8 header_type; + int i; + struct resource *r; + + pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* + * For bridges, we enable both memory and I/O decoding + * in call cases. + */ + cmd |= PCI_COMMAND_IO; + cmd |= PCI_COMMAND_MEMORY; + } else { + /* + * For endpoints, we enable memory and/or I/O decoding + * only if they have a memory resource of that type. + */ + for (i = 0; i < 6; i++) { + r = &dev->resource[i]; + if (r->flags & IORESOURCE_UNSET) { + pr_err("PCI: Device %s not available " + "because of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + } + + /* + * We only write the command if it changed. + */ + if (cmd != old_cmd) + pci_write_config_word(dev, PCI_COMMAND, cmd); + return 0; +} + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) +{ + unsigned long start = pci_resource_start(dev, bar); + unsigned long len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len) + return NULL; + if (max && len > max) + len = max; + + if (!(flags & IORESOURCE_MEM)) { + pr_info("PCI: Trying to map invalid resource %#lx\n", flags); + start = 0; + } + + return (void __iomem *)start; +} +EXPORT_SYMBOL(pci_iomap); + + +/**************************************************************** + * + * Tile PCI config space read/write routines + * + ****************************************************************/ + +/* + * These are the normal read and write ops + * These are expanded with macros from pci_bus_read_config_byte() etc. + * + * devfn is the combined PCI slot & function. + * + * offset is in bytes, from the start of config space for the + * specified bus & slot. + */ + +static int __devinit tile_cfg_read(struct pci_bus *bus, + unsigned int devfn, + int offset, + int size, + u32 *val) +{ + struct pci_controller *controller = bus->sysdata; + int busnum = bus->number & 0xff; + int slot = (devfn >> 3) & 0x1f; + int function = devfn & 0x7; + u32 addr; + int config_mode = 1; + + /* + * There is no bridge between the Tile and bus 0, so we + * use config0 to talk to bus 0. + * + * If we're talking to a bus other than zero then we + * must have found a bridge. + */ + if (busnum == 0) { + /* + * We fake an empty slot for (busnum == 0) && (slot > 0), + * since there is only one slot on bus 0. + */ + if (slot) { + *val = 0xFFFFFFFF; + return 0; + } + config_mode = 0; + } + + addr = busnum << 20; /* Bus in 27:20 */ + addr |= slot << 15; /* Slot (device) in 19:15 */ + addr |= function << 12; /* Function is in 14:12 */ + addr |= (offset & 0xFFF); /* byte address in 0:11 */ + + return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0, + (HV_VirtAddr)(val), size, addr); +} + + +/* + * See tile_cfg_read() for relevent comments. + * Note that "val" is the value to write, not a pointer to that value. + */ +static int __devinit tile_cfg_write(struct pci_bus *bus, + unsigned int devfn, + int offset, + int size, + u32 val) +{ + struct pci_controller *controller = bus->sysdata; + int busnum = bus->number & 0xff; + int slot = (devfn >> 3) & 0x1f; + int function = devfn & 0x7; + u32 addr; + int config_mode = 1; + HV_VirtAddr valp = (HV_VirtAddr)&val; + + /* + * For bus 0 slot 0 we use config 0 accesses. + */ + if (busnum == 0) { + /* + * We fake an empty slot for (busnum == 0) && (slot > 0), + * since there is only one slot on bus 0. + */ + if (slot) + return 0; + config_mode = 0; + } + + addr = busnum << 20; /* Bus in 27:20 */ + addr |= slot << 15; /* Slot (device) in 19:15 */ + addr |= function << 12; /* Function is in 14:12 */ + addr |= (offset & 0xFFF); /* byte address in 0:11 */ + +#ifdef __BIG_ENDIAN + /* Point to the correct part of the 32-bit "val". */ + valp += 4 - size; +#endif + + return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0, + valp, size, addr); +} + + +static struct pci_ops tile_cfg_ops = { + .read = tile_cfg_read, + .write = tile_cfg_write, +}; + + +/* + * In the following, each PCI controller's mem_resources[1] + * represents its (non-prefetchable) PCI memory resource. + * mem_resources[0] and mem_resources[2] refer to its PCI I/O and + * prefetchable PCI memory resources, respectively. + * For more details, see pci_setup_bridge() in setup-bus.c. + * By comparing the target PCI memory address against the + * end address of controller 0, we can determine the controller + * that should accept the PCI memory access. + */ +#define TILE_READ(size, type) \ +type _tile_read##size(unsigned long addr) \ +{ \ + type val; \ + int idx = 0; \ + if (addr > controllers[0].mem_resources[1].end && \ + addr > controllers[0].mem_resources[2].end) \ + idx = 1; \ + if (hv_dev_pread(controllers[idx].hv_mem_fd, 0, \ + (HV_VirtAddr)(&val), sizeof(type), addr)) \ + pr_err("PCI: read %zd bytes at 0x%lX failed\n", \ + sizeof(type), addr); \ + return val; \ +} \ +EXPORT_SYMBOL(_tile_read##size) + +TILE_READ(b, u8); +TILE_READ(w, u16); +TILE_READ(l, u32); +TILE_READ(q, u64); + +#define TILE_WRITE(size, type) \ +void _tile_write##size(type val, unsigned long addr) \ +{ \ + int idx = 0; \ + if (addr > controllers[0].mem_resources[1].end && \ + addr > controllers[0].mem_resources[2].end) \ + idx = 1; \ + if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0, \ + (HV_VirtAddr)(&val), sizeof(type), addr)) \ + pr_err("PCI: write %zd bytes at 0x%lX failed\n", \ + sizeof(type), addr); \ +} \ +EXPORT_SYMBOL(_tile_write##size) + +TILE_WRITE(b, u8); +TILE_WRITE(w, u16); +TILE_WRITE(l, u32); +TILE_WRITE(q, u64); |