diff options
Diffstat (limited to 'arch/powerpc/kernel/exceptions-64s.S')
| -rw-r--r-- | arch/powerpc/kernel/exceptions-64s.S | 322 |
1 files changed, 92 insertions, 230 deletions
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 15c5a4f6de01..cb705fdbb458 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -12,6 +12,7 @@ * */ +#include <asm/hw_irq.h> #include <asm/exception-64s.h> #include <asm/ptrace.h> @@ -19,7 +20,7 @@ * We layout physical memory as follows: * 0x0000 - 0x00ff : Secondary processor spin code * 0x0100 - 0x2fff : pSeries Interrupt prologs - * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs + * 0x3000 - 0x5fff : interrupt support common interrupt prologs * 0x6000 - 0x6fff : Initial (CPU0) segment table * 0x7000 - 0x7fff : FWNMI data area * 0x8000 - : Early init and support code @@ -100,14 +101,14 @@ data_access_not_stab: END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) #endif EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD, - KVMTEST_PR, 0x300) + KVMTEST, 0x300) . = 0x380 .globl data_access_slb_pSeries data_access_slb_pSeries: HMT_MEDIUM SET_SCRATCH0(r13) - EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x380) + EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x380) std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR #ifdef __DISABLED__ @@ -329,8 +330,8 @@ do_stab_bolted_pSeries: EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD) #endif /* CONFIG_POWER4_ONLY */ - KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_STD, 0x300) - KVM_HANDLER_PR_SKIP(PACA_EXSLB, EXC_STD, 0x380) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300) + KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x400) KVM_HANDLER_PR(PACA_EXSLB, EXC_STD, 0x480) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x900) @@ -356,34 +357,60 @@ do_stab_bolted_pSeries: KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf40) /* - * An interrupt came in while soft-disabled; clear EE in SRR1, - * clear paca->hard_enabled and return. + * An interrupt came in while soft-disabled. We set paca->irq_happened, + * then, if it was a decrementer interrupt, we bump the dec to max and + * and return, else we hard disable and return. This is called with + * r10 containing the value to OR to the paca field. */ -masked_interrupt: - stb r10,PACAHARDIRQEN(r13) - mtcrf 0x80,r9 - ld r9,PACA_EXGEN+EX_R9(r13) - mfspr r10,SPRN_SRR1 - rldicl r10,r10,48,1 /* clear MSR_EE */ - rotldi r10,r10,16 - mtspr SPRN_SRR1,r10 - ld r10,PACA_EXGEN+EX_R10(r13) - GET_SCRATCH0(r13) - rfid +#define MASKED_INTERRUPT(_H) \ +masked_##_H##interrupt: \ + std r11,PACA_EXGEN+EX_R11(r13); \ + lbz r11,PACAIRQHAPPENED(r13); \ + or r11,r11,r10; \ + stb r11,PACAIRQHAPPENED(r13); \ + andi. r10,r10,PACA_IRQ_DEC; \ + beq 1f; \ + lis r10,0x7fff; \ + ori r10,r10,0xffff; \ + mtspr SPRN_DEC,r10; \ + b 2f; \ +1: mfspr r10,SPRN_##_H##SRR1; \ + rldicl r10,r10,48,1; /* clear MSR_EE */ \ + rotldi r10,r10,16; \ + mtspr SPRN_##_H##SRR1,r10; \ +2: mtcrf 0x80,r9; \ + ld r9,PACA_EXGEN+EX_R9(r13); \ + ld r10,PACA_EXGEN+EX_R10(r13); \ + ld r11,PACA_EXGEN+EX_R11(r13); \ + GET_SCRATCH0(r13); \ + ##_H##rfid; \ b . + + MASKED_INTERRUPT() + MASKED_INTERRUPT(H) -masked_Hinterrupt: - stb r10,PACAHARDIRQEN(r13) - mtcrf 0x80,r9 - ld r9,PACA_EXGEN+EX_R9(r13) - mfspr r10,SPRN_HSRR1 - rldicl r10,r10,48,1 /* clear MSR_EE */ - rotldi r10,r10,16 - mtspr SPRN_HSRR1,r10 - ld r10,PACA_EXGEN+EX_R10(r13) - GET_SCRATCH0(r13) - hrfid - b . +/* + * Called from arch_local_irq_enable when an interrupt needs + * to be resent. r3 contains 0x500 or 0x900 to indicate which + * kind of interrupt. MSR:EE is already off. We generate a + * stackframe like if a real interrupt had happened. + * + * Note: While MSR:EE is off, we need to make sure that _MSR + * in the generated frame has EE set to 1 or the exception + * handler will not properly re-enable them. + */ +_GLOBAL(__replay_interrupt) + /* We are going to jump to the exception common code which + * will retrieve various register values from the PACA which + * we don't give a damn about, so we don't bother storing them. + */ + mfmsr r12 + mflr r11 + mfcr r9 + ori r12,r12,MSR_EE + andi. r3,r3,0x0800 + bne decrementer_common + b hardware_interrupt_common #ifdef CONFIG_PPC_PSERIES /* @@ -458,14 +485,15 @@ machine_check_common: bl .machine_check_exception b .ret_from_except - STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt) + STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) + STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception) STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception) - STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception) + STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception) STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) #ifdef CONFIG_ALTIVEC STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) @@ -482,6 +510,9 @@ machine_check_common: system_call_entry: b system_call_common +ppc64_runlatch_on_trampoline: + b .__ppc64_runlatch_on + /* * Here we have detected that the kernel stack pointer is bad. * R9 contains the saved CR, r13 points to the paca, @@ -555,6 +586,8 @@ data_access_common: mfspr r10,SPRN_DSISR stw r10,PACA_EXGEN+EX_DSISR(r13) EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) + DISABLE_INTS + ld r12,_MSR(r1) ld r3,PACA_EXGEN+EX_DAR(r13) lwz r4,PACA_EXGEN+EX_DSISR(r13) li r5,0x300 @@ -569,6 +602,7 @@ h_data_storage_common: stw r10,PACA_EXGEN+EX_DSISR(r13) EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN) bl .save_nvgprs + DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD bl .unknown_exception b .ret_from_except @@ -577,6 +611,8 @@ h_data_storage_common: .globl instruction_access_common instruction_access_common: EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) + DISABLE_INTS + ld r12,_MSR(r1) ld r3,_NIP(r1) andis. r4,r12,0x5820 li r5,0x400 @@ -672,12 +708,6 @@ _GLOBAL(slb_miss_realmode) ld r10,PACA_EXSLB+EX_LR(r13) ld r3,PACA_EXSLB+EX_R3(r13) lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - ld r11,PACALPPACAPTR(r13) - ld r11,LPPACASRR0(r11) /* get SRR0 value */ -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ mtlr r10 @@ -690,12 +720,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ .machine pop -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ ld r9,PACA_EXSLB+EX_R9(r13) ld r10,PACA_EXSLB+EX_R10(r13) ld r11,PACA_EXSLB+EX_R11(r13) @@ -704,13 +728,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) rfid b . /* prevent speculative execution */ -2: -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - b unrecov_slb -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ - mfspr r11,SPRN_SRR0 +2: mfspr r11,SPRN_SRR0 ld r10,PACAKBASE(r13) LOAD_HANDLER(r10,unrecov_slb) mtspr SPRN_SRR0,r10 @@ -727,20 +745,6 @@ unrecov_slb: bl .unrecoverable_exception b 1b - .align 7 - .globl hardware_interrupt_common - .globl hardware_interrupt_entry -hardware_interrupt_common: - EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) - FINISH_NAP -hardware_interrupt_entry: - DISABLE_INTS -BEGIN_FTR_SECTION - bl .ppc64_runlatch_on -END_FTR_SECTION_IFSET(CPU_FTR_CTRL) - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_IRQ - b .ret_from_except_lite #ifdef CONFIG_PPC_970_NAP power4_fixup_nap: @@ -785,8 +789,8 @@ fp_unavailable_common: EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) bne 1f /* if from user, just load it up */ bl .save_nvgprs + DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS bl .kernel_fp_unavailable_exception BUG_OPCODE 1: bl .load_up_fpu @@ -805,8 +809,8 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif bl .save_nvgprs + DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS bl .altivec_unavailable_exception b .ret_from_except @@ -816,13 +820,14 @@ vsx_unavailable_common: EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN) #ifdef CONFIG_VSX BEGIN_FTR_SECTION - bne .load_up_vsx + beq 1f + b .load_up_vsx 1: END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif bl .save_nvgprs + DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS bl .vsx_unavailable_exception b .ret_from_except @@ -831,66 +836,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) __end_handlers: /* - * Return from an exception with minimal checks. - * The caller is assumed to have done EXCEPTION_PROLOG_COMMON. - * If interrupts have been enabled, or anything has been - * done that might have changed the scheduling status of - * any task or sent any task a signal, you should use - * ret_from_except or ret_from_except_lite instead of this. - */ -fast_exc_return_irq: /* restores irq state too */ - ld r3,SOFTE(r1) - TRACE_AND_RESTORE_IRQ(r3); - ld r12,_MSR(r1) - rldicl r4,r12,49,63 /* get MSR_EE to LSB */ - stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */ - b 1f - - .globl fast_exception_return -fast_exception_return: - ld r12,_MSR(r1) -1: ld r11,_NIP(r1) - andi. r3,r12,MSR_RI /* check if RI is set */ - beq- unrecov_fer - -#ifdef CONFIG_VIRT_CPU_ACCOUNTING - andi. r3,r12,MSR_PR - beq 2f - ACCOUNT_CPU_USER_EXIT(r3, r4) -2: -#endif - - ld r3,_CCR(r1) - ld r4,_LINK(r1) - ld r5,_CTR(r1) - ld r6,_XER(r1) - mtcr r3 - mtlr r4 - mtctr r5 - mtxer r6 - REST_GPR(0, r1) - REST_8GPRS(2, r1) - - mfmsr r10 - rldicl r10,r10,48,1 /* clear EE */ - rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */ - mtmsrd r10,1 - - mtspr SPRN_SRR1,r12 - mtspr SPRN_SRR0,r11 - REST_4GPRS(10, r1) - ld r1,GPR1(r1) - rfid - b . /* prevent speculative execution */ - -unrecov_fer: - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - - -/* * Hash table stuff */ .align 7 @@ -912,28 +857,6 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */ andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */ bne 77f /* then don't call hash_page now */ - - /* - * On iSeries, we soft-disable interrupts here, then - * hard-enable interrupts so that the hash_page code can spin on - * the hash_table_lock without problems on a shared processor. - */ - DISABLE_INTS - - /* - * Currently, trace_hardirqs_off() will be called by DISABLE_INTS - * and will clobber volatile registers when irq tracing is enabled - * so we need to reload them. It may be possible to be smarter here - * and move the irq tracing elsewhere but let's keep it simple for - * now - */ -#ifdef CONFIG_TRACE_IRQFLAGS - ld r3,_DAR(r1) - ld r4,_DSISR(r1) - ld r5,_TRAP(r1) - ld r12,_MSR(r1) - clrrdi r5,r5,4 -#endif /* CONFIG_TRACE_IRQFLAGS */ /* * We need to set the _PAGE_USER bit if MSR_PR is set or if we are * accessing a userspace segment (even from the kernel). We assume @@ -951,62 +874,25 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) * r4 contains the required access permissions * r5 contains the trap number * - * at return r3 = 0 for success + * at return r3 = 0 for success, 1 for page fault, negative for error */ bl .hash_page /* build HPTE if possible */ cmpdi r3,0 /* see if hash_page succeeded */ -BEGIN_FW_FTR_SECTION - /* - * If we had interrupts soft-enabled at the point where the - * DSI/ISI occurred, and an interrupt came in during hash_page, - * handle it now. - * We jump to ret_from_except_lite rather than fast_exception_return - * because ret_from_except_lite will check for and handle pending - * interrupts if necessary. - */ - beq 13f -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) - -BEGIN_FW_FTR_SECTION - /* - * Here we have interrupts hard-disabled, so it is sufficient - * to restore paca->{soft,hard}_enable and get out. - */ + /* Success */ beq fast_exc_return_irq /* Return from exception on success */ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) - - /* For a hash failure, we don't bother re-enabling interrupts */ - ble- 12f - - /* - * hash_page couldn't handle it, set soft interrupt enable back - * to what it was before the trap. Note that .arch_local_irq_restore - * handles any interrupts pending at this point. - */ - ld r3,SOFTE(r1) - TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f) - bl .arch_local_irq_restore - b 11f -/* We have a data breakpoint exception - handle it */ -handle_dabr_fault: - bl .save_nvgprs - ld r4,_DAR(r1) - ld r5,_DSISR(r1) - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_dabr - b .ret_from_except_lite + /* Error */ + blt- 13f /* Here we have a page fault that hash_page can't handle. */ handle_page_fault: - ENABLE_INTS 11: ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD bl .do_page_fault cmpdi r3,0 - beq+ 13f + beq+ 12f bl .save_nvgprs mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD @@ -1014,12 +900,20 @@ handle_page_fault: bl .bad_page_fault b .ret_from_except -13: b .ret_from_except_lite +/* We have a data breakpoint exception - handle it */ +handle_dabr_fault: + bl .save_nvgprs + ld r4,_DAR(r1) + ld r5,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_dabr +12: b .ret_from_except_lite + /* We have a page fault that hash_page could handle but HV refused * the PTE insertion */ -12: bl .save_nvgprs +13: bl .save_nvgprs mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD ld r4,_DAR(r1) @@ -1141,51 +1035,19 @@ _GLOBAL(do_stab_bolted) .= 0x7000 .globl fwnmi_data_area fwnmi_data_area: -#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ - /* iSeries does not use the FWNMI stuff, so it is safe to put - * this here, even if we later allow kernels that will boot on - * both pSeries and iSeries */ -#ifdef CONFIG_PPC_ISERIES - . = LPARMAP_PHYS - .globl xLparMap -xLparMap: - .quad HvEsidsToMap /* xNumberEsids */ - .quad HvRangesToMap /* xNumberRanges */ - .quad STAB0_PAGE /* xSegmentTableOffs */ - .zero 40 /* xRsvd */ - /* xEsids (HvEsidsToMap entries of 2 quads) */ - .quad PAGE_OFFSET_ESID /* xKernelEsid */ - .quad PAGE_OFFSET_VSID /* xKernelVsid */ - .quad VMALLOC_START_ESID /* xKernelEsid */ - .quad VMALLOC_START_VSID /* xKernelVsid */ - /* xRanges (HvRangesToMap entries of 3 quads) */ - .quad HvPagesToMap /* xPages */ - .quad 0 /* xOffset */ - .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */ - -#endif /* CONFIG_PPC_ISERIES */ - -#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) /* pseries and powernv need to keep the whole page from * 0x7000 to 0x8000 free for use by the firmware */ . = 0x8000 #endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ -/* - * Space for CPU0's segment table. - * - * On iSeries, the hypervisor must fill in at least one entry before - * we get control (with relocate on). The address is given to the hv - * as a page number (see xLparMap above), so this must be at a - * fixed address (the linker can't compute (u64)&initial_stab >> - * PAGE_SHIFT). - */ - . = STAB0_OFFSET /* 0x8000 */ +/* Space for CPU0's segment table */ + .balign 4096 .globl initial_stab initial_stab: .space 4096 + #ifdef CONFIG_PPC_POWERNV _GLOBAL(opal_mc_secondary_handler) HMT_MEDIUM |