1 files changed, 0 insertions, 151 deletions
diff --git a/arch/mn10300/boot/compressed/head.S b/arch/mn10300/boot/compressed/head.S
deleted file mode 100644
index 7b50345b9e84..000000000000
--- a/arch/mn10300/boot/compressed/head.S
+++ /dev/null
@@ -1,151 +0,0 @@
-/* Boot entry point for a compressed MN10300 kernel
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-	.section	.text
-
-#define DEBUG
-
-#include <linux/linkage.h>
-#include <asm/cpu-regs.h>
-#include <asm/cache.h>
-#ifdef CONFIG_SMP
-#include <proc/smp-regs.h>
-#endif
-
-	.globl startup_32
-startup_32:
-#ifdef CONFIG_SMP
-	#
-	# Secondary CPUs jump directly to the kernel entry point
-	#
-	# Must save primary CPU's D0-D2 registers as they hold boot parameters
-	#
-	mov	(CPUID), d3
-	and	CPUID_MASK,d3
-	beq	startup_primary
-	mov	CONFIG_KERNEL_TEXT_ADDRESS,a0
-	jmp	(a0)
-
-startup_primary:
-#endif /* CONFIG_SMP */
-
-	# first save parameters from bootloader
-	mov	param_save_area,a0
-	mov	d0,(a0)
-	mov	d1,(4,a0)
-	mov	d2,(8,a0)
-
-	mov	sp,a3
-	mov	decomp_stack+0x2000-4,a0
-	mov	a0,sp
-
-	# invalidate and enable both of the caches
-	mov	CHCTR,a0
-	clr	d0
-	movhu	d0,(a0)					# turn off first
-	mov	CHCTR_ICINV|CHCTR_DCINV,d0
-	movhu	d0,(a0)
-	setlb
-	mov	(a0),d0
-	btst	CHCTR_ICBUSY|CHCTR_DCBUSY,d0		# wait till not busy
-	lne
-
-#ifdef CONFIG_MN10300_CACHE_ENABLED
-#ifdef CONFIG_MN10300_CACHE_WBACK
-	mov	CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
-#else
-	mov	CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
-#endif /* WBACK */
-	movhu	d0,(a0)					# enable
-#endif /* !ENABLED */
-
-	# clear the BSS area
-	mov	__bss_start,a0
-	mov	_end,a1
-	clr	d0
-bssclear:
-	cmp	a1,a0
-	bge	bssclear_end
-	movbu	d0,(a0)
-	inc	a0
-	bra	bssclear
-bssclear_end:
-
-	# decompress the kernel
-	call	decompress_kernel[],0
-#ifdef CONFIG_MN10300_CACHE_WBACK
-	call	mn10300_dcache_flush_inv[],0
-#endif
-
-	# disable caches again
-	mov	CHCTR,a0
-	clr	d0
-	movhu	d0,(a0)
-	setlb
-	mov	(a0),d0
-	btst	CHCTR_ICBUSY|CHCTR_DCBUSY,d0		# wait till not busy
-	lne
-
-	mov	param_save_area,a0
-	mov	(a0),d0
-	mov	(4,a0),d1
-	mov	(8,a0),d2
-
-	# jump to the kernel proper entry point
-	mov	a3,sp
-	mov	CONFIG_KERNEL_TEXT_ADDRESS,a0
-	jmp	(a0)
-
-
-###############################################################################
-#
-# Cache flush routines
-#
-###############################################################################
-#ifdef CONFIG_MN10300_CACHE_WBACK
-mn10300_dcache_flush_inv:
-	movhu	(CHCTR),d0
-	btst	CHCTR_DCEN,d0
-	beq	mn10300_dcache_flush_inv_end
-
-	mov	L1_CACHE_NENTRIES,d1
-	clr	a1
-
-mn10300_dcache_flush_inv_loop:
-	mov	(DCACHE_PURGE_WAY0(0),a1),d0	# unconditional purge
-	mov	(DCACHE_PURGE_WAY1(0),a1),d0	# unconditional purge
-	mov	(DCACHE_PURGE_WAY2(0),a1),d0	# unconditional purge
-	mov	(DCACHE_PURGE_WAY3(0),a1),d0	# unconditional purge
-
-	add	L1_CACHE_BYTES,a1
-	add	-1,d1
-	bne	mn10300_dcache_flush_inv_loop
-
-mn10300_dcache_flush_inv_end:
-	ret	[],0
-#endif /* CONFIG_MN10300_CACHE_WBACK */
-
-
-###############################################################################
-#
-# Data areas
-#
-###############################################################################
-	.data
-	.align		4
-param_save_area:
-	.rept 3
-	.word		0
-	.endr
-
-	.section	.bss
-	.align		4
-decomp_stack:
-	.space		0x2000