diff options
Diffstat (limited to 'arch/mips')
234 files changed, 7721 insertions, 3645 deletions
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index 0de839882106..a69b272a3ab0 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -17,6 +17,7 @@ platforms += jazz platforms += jz4740 platforms += lantiq platforms += lasat +platforms += loongson2ef platforms += loongson32 platforms += loongson64 platforms += mti-malta @@ -30,6 +31,7 @@ platforms += ralink platforms += rb532 platforms += sgi-ip22 platforms += sgi-ip27 +platforms += sgi-ip30 platforms += sgi-ip32 platforms += sibyte platforms += sni diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a0bd9bdb5f83..c86be02b6d89 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -7,6 +7,7 @@ config MIPS select ARCH_CLOCKSOURCE_DATA select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAS_UBSAN_SANITIZE_ALL + select ARCH_HAS_FORTIFY_SOURCE select ARCH_SUPPORTS_UPROBES select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF if 64BIT @@ -86,6 +87,8 @@ config MIPS select SYSCTL_EXCEPTION_TRACE select VIRT_TO_BUS select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI) + select ARCH_HAS_KCOV + select HAVE_GCC_PLUGINS menu "Machine selection" @@ -359,6 +362,8 @@ config MACH_DECSTATION config MACH_JAZZ bool "Jazz family of machines" + select ARC_MEMORY + select ARC_PROMLIB select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_MIGHT_HAVE_PC_SERIO select FW_ARC @@ -441,7 +446,7 @@ config LASAT select SYS_SUPPORTS_LITTLE_ENDIAN config MACH_LOONGSON32 - bool "Loongson-1 family of machines" + bool "Loongson 32-bit family of machines" select SYS_SUPPORTS_ZBOOT help This enables support for the Loongson-1 family of machines. @@ -450,18 +455,48 @@ config MACH_LOONGSON32 the Institute of Computing Technology (ICT), Chinese Academy of Sciences (CAS). +config MACH_LOONGSON2EF + bool "Loongson-2E/F family of machines" + select SYS_SUPPORTS_ZBOOT + help + This enables the support of early Loongson-2E/F family of machines. + config MACH_LOONGSON64 - bool "Loongson-2/3 family of machines" + bool "Loongson 64-bit family of machines" + select ARCH_SPARSEMEM_ENABLE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select BOOT_ELF32 + select BOARD_SCACHE + select CSRC_R4K + select CEVT_R4K + select CPU_HAS_WB + select FORCE_PCI + select ISA + select I8259 + select IRQ_MIPS_CPU + select NR_CPUS_DEFAULT_4 + select USE_GENERIC_EARLY_PRINTK_8250 + select SYS_HAS_CPU_LOONGSON64 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_HOTPLUG_CPU + select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_ZBOOT + select LOONGSON_MC146818 + select ZONE_DMA32 + select NUMA help This enables the support of Loongson-2/3 family of machines. - Loongson-2 is a family of single-core CPUs and Loongson-3 is a - family of multi-core CPUs. They are both 64-bit general-purpose - MIPS-compatible CPUs. Loongson-2/3 are developed by the Institute - of Computing Technology (ICT), Chinese Academy of Sciences (CAS) - in the People's Republic of China. The chief architect is Professor - Weiwu Hu. + Loongson-2 and Loongson-3 are 64-bit general-purpose processors with + GS264/GS464/GS464E/GS464V microarchitecture (except old Loongson-2E + and Loongson-2F which will be removed), developed by the Institute + of Computing Technology (ICT), Chinese Academy of Sciences (CAS). config MACH_PISTACHIO bool "IMG Pistachio SoC based boards" @@ -631,6 +666,8 @@ config RALINK config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" + select ARC_MEMORY + select ARC_PROMLIB select FW_ARC select FW_ARC32 select ARCH_MIGHT_HAVE_PC_SERIO @@ -654,14 +691,7 @@ config SGI_IP22 select SWAP_IO_SPACE select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000 - # - # Disable EARLY_PRINTK for now since it leads to overwritten prom - # memory during early boot on some machines. - # - # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com - # for a more details discussion - # - # select SYS_HAS_EARLY_PRINTK + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN @@ -674,8 +704,10 @@ config SGI_IP22 config SGI_IP27 bool "SGI IP27 (Origin200/2000)" select ARCH_HAS_PHYS_TO_DMA + select ARCH_SPARSEMEM_ENABLE select FW_ARC select FW_ARC64 + select ARC_CMDLINE_ONLY select BOOT_ELF64 select DEFAULT_SGI_PARTITION select SYS_HAS_EARLY_PRINTK @@ -698,6 +730,8 @@ config SGI_IP27 config SGI_IP28 bool "SGI IP28 (Indigo2 R10k)" + select ARC_MEMORY + select ARC_PROMLIB select FW_ARC select FW_ARC64 select ARCH_MIGHT_HAVE_PC_SERIO @@ -719,14 +753,7 @@ config SGI_IP28 select SGI_HAS_ZILOG select SWAP_IO_SPACE select SYS_HAS_CPU_R10000 - # - # Disable EARLY_PRINTK for now since it leads to overwritten prom - # memory during early boot on some machines. - # - # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com - # for a more details discussion - # - # select SYS_HAS_EARLY_PRINTK + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select MIPS_L1_CACHE_SHIFT_7 @@ -734,8 +761,37 @@ config SGI_IP28 This is the SGI Indigo2 with R10000 processor. To compile a Linux kernel that runs on these, say Y here. +config SGI_IP30 + bool "SGI IP30 (Octane/Octane2)" + select ARCH_HAS_PHYS_TO_DMA + select FW_ARC + select FW_ARC64 + select BOOT_ELF64 + select CEVT_R4K + select CSRC_R4K + select SYNC_R4K if SMP + select ZONE_DMA32 + select HAVE_PCI + select IRQ_MIPS_CPU + select IRQ_DOMAIN_HIERARCHY + select NR_CPUS_DEFAULT_2 + select PCI_DRIVERS_GENERIC + select PCI_XTALK_BRIDGE + select SYS_HAS_EARLY_PRINTK + select SYS_HAS_CPU_R10000 + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_SMP + select MIPS_L1_CACHE_SHIFT_7 + select ARC_MEMORY + help + These are the SGI Octane and Octane2 graphics workstations. To + compile a Linux kernel that runs on these, say Y here. + config SGI_IP32 bool "SGI IP32 (O2)" + select ARC_MEMORY + select ARC_PROMLIB select ARCH_HAS_PHYS_TO_DMA select FW_ARC select FW_ARC32 @@ -843,6 +899,8 @@ config SIBYTE_BIGSUR config SNI_RM bool "SNI RM200/300/400" + select ARC_MEMORY + select ARC_PROMLIB select FW_ARC if CPU_LITTLE_ENDIAN select FW_ARC32 if CPU_LITTLE_ENDIAN select FW_SNIPROM if CPU_BIG_ENDIAN @@ -1038,6 +1096,7 @@ source "arch/mips/sibyte/Kconfig" source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" source "arch/mips/cavium-octeon/Kconfig" +source "arch/mips/loongson2ef/Kconfig" source "arch/mips/loongson32/Kconfig" source "arch/mips/loongson64/Kconfig" source "arch/mips/netlogic/Kconfig" @@ -1353,19 +1412,18 @@ config MIPS_L1_CACHE_SHIFT config HAVE_STD_PC_SERIAL_PORT bool +config ARC_CMDLINE_ONLY + bool + config ARC_CONSOLE bool "ARC console support" depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN) config ARC_MEMORY bool - depends on MACH_JAZZ || SNI_RM || SGI_IP32 - default y config ARC_PROMLIB bool - depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32 - default y config FW_ARC64 bool @@ -1379,51 +1437,56 @@ choice prompt "CPU type" default CPU_R4X00 -config CPU_LOONGSON3 - bool "Loongson 3 CPU" - depends on SYS_HAS_CPU_LOONGSON3 +config CPU_LOONGSON64 + bool "Loongson 64-bit CPU" + depends on SYS_HAS_CPU_LOONGSON64 select ARCH_HAS_PHYS_TO_DMA select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HUGEPAGES + select CPU_SUPPORTS_MSA select CPU_HAS_LOAD_STORE_LR select WEAK_ORDERING select WEAK_REORDERING_BEYOND_LLSC + select MIPS_ASID_BITS_VARIABLE select MIPS_PGD_C0_CONTEXT select MIPS_L1_CACHE_SHIFT_6 select GPIOLIB select SWIOTLB help - The Loongson 3 processor implements the MIPS64R2 instruction - set with many extensions. + The Loongson GSx64(GS264/GS464/GS464E/GS464V) series of processor + cores implements the MIPS64R2 instruction set with many extensions, + including most 64-bit Loongson-2 (2H, 2K) and Loongson-3 (3A1000, + 3B1000, 3B1500, 3A2000, 3A3000 and 3A4000) processors. However, old + Loongson-2E/2F is not covered here and will be removed in future. config LOONGSON3_ENHANCEMENT - bool "New Loongson 3 CPU Enhancements" + bool "New Loongson-3 CPU Enhancements" default n select CPU_MIPSR2 select CPU_HAS_PREFETCH - depends on CPU_LOONGSON3 + depends on CPU_LOONGSON64 help - New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A + New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as - FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User + FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), Fast TLB refill support, etc. This option enable those enhancements which are not probed at run time. If you want a generic kernel to run on all Loongson 3 machines, please say 'N' here. If you want a high-performance kernel to run on - new Loongson 3 machines only, please say 'Y' here. + new Loongson-3 machines only, please say 'Y' here. config CPU_LOONGSON3_WORKAROUNDS - bool "Old Loongson 3 LLSC Workarounds" + bool "Old Loongson-3 LLSC Workarounds" default y if SMP - depends on CPU_LOONGSON3 + depends on CPU_LOONGSON64 help - Loongson 3 processors have the llsc issues which require workarounds. + Loongson-3 processors have the llsc issues which require workarounds. Without workarounds the system may hang unexpectedly. - Newer Loongson 3 will fix these issues and no workarounds are needed. + Newer Loongson-3 will fix these issues and no workarounds are needed. The workarounds have no significant side effect on them but may decrease the performance of the system so this option should be disabled unless the kernel is intended to be run on old systems. @@ -1433,7 +1496,7 @@ config CPU_LOONGSON3_WORKAROUNDS config CPU_LOONGSON2E bool "Loongson 2E" depends on SYS_HAS_CPU_LOONGSON2E - select CPU_LOONGSON2 + select CPU_LOONGSON2EF help The Loongson 2E processor implements the MIPS III instruction set with many extensions. @@ -1444,7 +1507,7 @@ config CPU_LOONGSON2E config CPU_LOONGSON2F bool "Loongson 2F" depends on SYS_HAS_CPU_LOONGSON2F - select CPU_LOONGSON2 + select CPU_LOONGSON2EF select GPIOLIB help The Loongson 2F processor implements the MIPS III instruction set @@ -1457,7 +1520,7 @@ config CPU_LOONGSON2F config CPU_LOONGSON1B bool "Loongson 1B" depends on SYS_HAS_CPU_LOONGSON1B - select CPU_LOONGSON1 + select CPU_LOONGSON32 select LEDS_GPIO_REGISTER help The Loongson 1B is a 32-bit SoC, which implements the MIPS32 @@ -1467,7 +1530,7 @@ config CPU_LOONGSON1B config CPU_LOONGSON1C bool "Loongson 1C" depends on SYS_HAS_CPU_LOONGSON1C - select CPU_LOONGSON1 + select CPU_LOONGSON32 select LEDS_GPIO_REGISTER help The Loongson 1C is a 32-bit SoC, which implements the MIPS32 @@ -1857,7 +1920,7 @@ config SYS_SUPPORTS_ZBOOT_UART_PROM bool select SYS_SUPPORTS_ZBOOT -config CPU_LOONGSON2 +config CPU_LOONGSON2EF bool select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1866,7 +1929,7 @@ config CPU_LOONGSON2 select ARCH_HAS_PHYS_TO_DMA select CPU_HAS_LOAD_STORE_LR -config CPU_LOONGSON1 +config CPU_LOONGSON32 bool select CPU_MIPS32 select CPU_MIPSR2 @@ -1900,7 +1963,7 @@ config CPU_BMIPS5000 select SYS_SUPPORTS_HOTPLUG_CPU select CPU_HAS_RIXI -config SYS_HAS_CPU_LOONGSON3 +config SYS_HAS_CPU_LOONGSON64 bool select CPU_SUPPORTS_CPUFREQ select CPU_HAS_RIXI @@ -1912,7 +1975,6 @@ config SYS_HAS_CPU_LOONGSON2F bool select CPU_SUPPORTS_CPUFREQ select CPU_SUPPORTS_ADDRWINCFG if 64BIT - select CPU_SUPPORTS_UNCACHED_ACCELERATED config SYS_HAS_CPU_LOONGSON1B bool @@ -2089,8 +2151,6 @@ config CPU_SUPPORTS_ADDRWINCFG config CPU_SUPPORTS_HUGEPAGES bool depends on !(32BIT && (ARCH_PHYS_ADDR_T_64BIT || EVA)) -config CPU_SUPPORTS_UNCACHED_ACCELERATED - bool config MIPS_PGD_C0_CONTEXT bool default y if 64BIT && (CPU_MIPSR2 || CPU_MIPSR6) && !CPU_XLP @@ -2162,7 +2222,7 @@ choice config PAGE_SIZE_4KB bool "4kB" - depends on !CPU_LOONGSON2 && !CPU_LOONGSON3 + depends on !CPU_LOONGSON2EF && !CPU_LOONGSON64 help This option select the standard 4kB Linux page size. On some R3000-family processors this is the only available page size. Using @@ -2554,6 +2614,10 @@ config CPU_R4000_WORKAROUNDS config CPU_R4400_WORKAROUNDS bool +config CPU_R4X00_BUGS64 + bool + default y if SYS_HAS_CPU_R4X00 && 64BIT && (TARGET_ISA_REV < 1) + config MIPS_ASID_SHIFT int default 6 if CPU_R3000 || CPU_TX39XX @@ -2612,20 +2676,11 @@ config CPU_SUPPORTS_MSA config ARCH_FLATMEM_ENABLE def_bool y - depends on !NUMA && !CPU_LOONGSON2 - -config ARCH_DISCONTIGMEM_ENABLE - bool - default y if SGI_IP27 - help - Say Y to support efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See <file:Documentation/vm/numa.rst> for more. + depends on !NUMA && !CPU_LOONGSON2EF config ARCH_SPARSEMEM_ENABLE bool - select SPARSEMEM_STATIC + select SPARSEMEM_STATIC if !SGI_IP27 config NUMA bool "NUMA Support" @@ -2702,7 +2757,7 @@ config NODES_SHIFT config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON3) + depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64) default y help Enable hardware performance counter support for perf events. If diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 0c86b2a2adfc..93a2974d2ab7 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -32,7 +32,6 @@ config USE_GENERIC_EARLY_PRINTK_8250 config CMDLINE_BOOL bool "Built-in kernel command line" - default n help For most systems, it is firmware or second stage bootloader that by default specifies the kernel command line options. However, @@ -53,7 +52,6 @@ config CMDLINE_BOOL config CMDLINE string "Default kernel command string" depends on CMDLINE_BOOL - default "" help On some platforms, there is currently no way for the boot loader to pass arguments to the kernel. For these platforms, and for the cases @@ -68,7 +66,6 @@ config CMDLINE config CMDLINE_OVERRIDE bool "Built-in command line overrides firmware arguments" - default n depends on CMDLINE_BOOL help By setting this option to 'Y' you will have your kernel ignore diff --git a/arch/mips/Makefile b/arch/mips/Makefile index cdc09b71febe..e1c44aed8156 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -14,6 +14,9 @@ archscripts: scripts_basic $(Q)$(MAKE) $(build)=arch/mips/tools elf-entry +ifeq ($(CONFIG_CPU_LOONGSON3_WORKAROUNDS),y) + $(Q)$(MAKE) $(build)=arch/mips/tools loongson3-llsc-check +endif $(Q)$(MAKE) $(build)=arch/mips/boot/tools relocs KBUILD_DEFCONFIG := 32r2el_defconfig @@ -323,7 +326,7 @@ libs-$(CONFIG_MIPS_FP_SUPPORT) += arch/mips/math-emu/ # See arch/mips/Kbuild for content of core part of the kernel core-y += arch/mips/ -drivers-$(CONFIG_MIPS_CRC_SUPPORT) += arch/mips/crypto/ +drivers-y += arch/mips/crypto/ drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/ # suspend and hibernation support diff --git a/arch/mips/Makefile.postlink b/arch/mips/Makefile.postlink index 4eea4188cb20..f03fdc95143e 100644 --- a/arch/mips/Makefile.postlink +++ b/arch/mips/Makefile.postlink @@ -3,7 +3,8 @@ # Post-link MIPS pass # =========================================================================== # -# 1. Insert relocations into vmlinux +# 1. Check that Loongson3 LL/SC workarounds are applied correctly +# 2. Insert relocations into vmlinux PHONY := __archpost __archpost: @@ -11,6 +12,10 @@ __archpost: -include include/config/auto.conf include scripts/Kbuild.include +CMD_LS3_LLSC = arch/mips/tools/loongson3-llsc-check +quiet_cmd_ls3_llsc = LLSCCHK $@ + cmd_ls3_llsc = $(CMD_LS3_LLSC) $@ + CMD_RELOCS = arch/mips/boot/tools/relocs quiet_cmd_relocs = RELOCS $@ cmd_relocs = $(CMD_RELOCS) $@ @@ -19,6 +24,9 @@ quiet_cmd_relocs = RELOCS $@ vmlinux: FORCE @true +ifeq ($(CONFIG_CPU_LOONGSON3_WORKAROUNDS),y) + $(call if_changed,ls3_llsc) +endif ifeq ($(CONFIG_RELOCATABLE),y) $(call if_changed,relocs) endif diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 2e9952311ecd..37b93166bf22 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -25,12 +25,47 @@ 0x30000000 0x30000000>; }; + leds { + compatible = "gpio-leds"; + + led0 { + label = "ci20:red:led0"; + gpios = <&gpc 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + led1 { + label = "ci20:red:led1"; + gpios = <&gpc 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "nand-disk"; + }; + + led2 { + label = "ci20:red:led2"; + gpios = <&gpc 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu1"; + }; + + led3 { + label = "ci20:red:led3"; + gpios = <&gpc 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + }; + }; + eth0_power: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "eth0_power"; gpio = <&gpb 25 GPIO_ACTIVE_LOW>; enable-active-high; }; + + wlan0_power: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "wlan0_power"; + gpio = <&gpb 19 GPIO_ACTIVE_LOW>; + enable-active-high; + }; }; &ext { @@ -54,9 +89,18 @@ bus-width = <4>; max-frequency = <50000000>; + non-removable; pinctrl-names = "default"; pinctrl-0 = <&pins_mmc1>; + + brcmf: wifi@1 { +/* reg = <4>;*/ + compatible = "brcm,bcm4330-fmac"; + vcc-supply = <&wlan0_power>; + device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>; + }; }; &uart0 { @@ -73,6 +117,23 @@ pinctrl-0 = <&pins_uart1>; }; +&uart2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; + vcc-supply = <&wlan0_power>; + device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; + }; +}; + &uart3 { status = "okay"; @@ -87,6 +148,123 @@ pinctrl-0 = <&pins_uart4>; }; +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c0>; + + clock-frequency = <400000>; + + act8600: act8600@5a { + compatible = "active-semi,act8600"; + reg = <0x5a>; + status = "okay"; + + regulators { + vddcore: SUDCDC1 { + regulator-name = "VDDCORE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + vddmem: SUDCDC2 { + regulator-name = "VDDMEM"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + vcc_33: SUDCDC3 { + regulator-name = "VCC33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vcc_50: SUDCDC4 { + regulator-name = "VCC50"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + vcc_25: LDO_REG5 { + regulator-name = "VCC25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + wifi_io: LDO_REG6 { + regulator-name = "WIFIIO"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + vcc_28: LDO_REG7 { + regulator-name = "VCC28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + vcc_15: LDO_REG8 { + regulator-name = "VCC15"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + vcc_18: LDO_REG9 { + regulator-name = "VCC18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vcc_11: LDO_REG10 { + regulator-name = "VCC11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c1>; + +}; + +&i2c2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c2>; + +}; + +&i2c3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c3>; + +}; + +&i2c4 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c4>; + + clock-frequency = <400000>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + interrupts = <110>; + }; +}; + &nemc { status = "okay"; @@ -197,6 +375,12 @@ bias-disable; }; + pins_uart2: uart2 { + function = "uart2"; + groups = "uart2-data", "uart2-hwflow"; + bias-disable; + }; + pins_uart3: uart3 { function = "uart3"; groups = "uart3-data", "uart3-hwflow"; @@ -209,6 +393,36 @@ bias-disable; }; + pins_i2c0: i2c0 { + function = "i2c0"; + groups = "i2c0-data"; + bias-disable; + }; + + pins_i2c1: i2c1 { + function = "i2c1"; + groups = "i2c1-data"; + bias-disable; + }; + + pins_i2c2: i2c2 { + function = "i2c2"; + groups = "i2c2-data"; + bias-disable; + }; + + pins_i2c3: i2c3 { + function = "i2c3"; + groups = "i2c3-data"; + bias-disable; + }; + + pins_i2c4: i2c4 { + function = "i2c4"; + groups = "i2c4-data-e"; + bias-disable; + }; + pins_nemc: nemc { function = "nemc"; groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe"; diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi index c54bd7cfec55..f928329b034b 100644 --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi @@ -262,6 +262,92 @@ status = "disabled"; }; + i2c0: i2c@10050000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x10050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <60>; + + clocks = <&cgu JZ4780_CLK_SMB0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c0_data>; + + status = "disabled"; + }; + + i2c1: i2c@10051000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10051000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <59>; + + clocks = <&cgu JZ4780_CLK_SMB1>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c1_data>; + + status = "disabled"; + }; + + i2c2: i2c@10052000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10052000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <58>; + + clocks = <&cgu JZ4780_CLK_SMB2>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c2_data>; + + status = "disabled"; + }; + + i2c3: i2c@10053000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10053000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <57>; + + clocks = <&cgu JZ4780_CLK_SMB3>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c3_data>; + + status = "disabled"; + }; + + i2c4: i2c@10054000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10054000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <56>; + + clocks = <&cgu JZ4780_CLK_SMB4>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c4_data>; + + status = "disabled"; + }; + watchdog: watchdog@10002000 { compatible = "ingenic,jz4780-watchdog"; reg = <0x10002000 0x10>; diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts new file mode 100644 index 000000000000..aa5caaa31104 --- /dev/null +++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Stefan Roese <sr@denx.de> + */ + +/dts-v1/; + +/include/ "mt7628a.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc", + "ralink,mt7628a-soc"; + model = "GARDENA smart Gateway (MT7688)"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */ + + user_btn1 { + label = "USER_BTN1"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code =<KEY_PROG1> ; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_pwm0_gpio>, /* GPIO18 */ + <&pinmux_pwm1_gpio>, /* GPIO19 */ + <&pinmux_sdmode_gpio>, /* GPIO22..29 */ + <&pinmux_p0led_an_gpio>; /* GPIO43 */ + /* + * <&pinmux_i2s_gpio> (covers GPIO0..3) is needed here as + * well for GPIO3. But this is already claimed for uart1 + * (see below). So we can't include it in this LED node. + */ + + power_blue { + label = "smartgw:power:blue"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_green { + label = "smartgw:power:green"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_red { + label = "smartgw:power:red"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_blue { + label = "smartgw:radio:blue"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_green { + label = "smartgw:radio:green"; + gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_red { + label = "smartgw:radio:red"; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_blue { + label = "smartgw:internet:blue"; + gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_green { + label = "smartgw:internet:green"; + gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_red { + label = "smartgw:internet:red"; + gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + ethernet_link { + label = "smartgw:eth:link"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "netdev"; + }; + + ethernet_activity { + label = "smartgw:eth:act"; + gpios = <&gpio 43 GPIO_ACTIVE_LOW>; + linux,default-trigger = "netdev"; + }; + }; + + aliases { + serial0 = &uart0; + }; +}; + +&i2c { + status = "okay"; +}; + +&spi { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0xa0000>; + read-only; + }; + + partition@a0000 { + label = "uboot_env0"; + reg = <0xa0000 0x10000>; + }; + + partition@b0000 { + label = "uboot_env1"; + reg = <0xb0000 0x10000>; + }; + + factory: partition@c0000 { + label = "factory"; + reg = <0xc0000 0x10000>; + read-only; + }; + }; + }; + + nand_flash@1 { + compatible = "spi-nand"; + linux,mtd-name = "gd5f"; + reg = <1>; + spi-max-frequency = <40000000>; + }; +}; + +&uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2s_gpio>; /* GPIO0..3 */ + + rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>; +}; + +&uart2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_p2led_an_gpio>, /* GPIO41 */ + <&pinmux_p3led_an_gpio>; /* GPIO40 */ + + rts-gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi index 61f8621e88b3..742bcc1dc2e0 100644 --- a/arch/mips/boot/dts/ralink/mt7628a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi @@ -199,6 +199,22 @@ status = "disabled"; }; + i2c: i2c@900 { + compatible = "mediatek,mt7621-i2c"; + reg = <0x900 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2c_i2c>; + + resets = <&resetc 16>; + reset-names = "i2c"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + uart0: uartlite@c00 { compatible = "ns16550a"; reg = <0xc00 0x100>; diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 95034bf5ca83..1f742c32a883 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -844,7 +844,7 @@ void __init prom_init(void) * BIST should always be enabled when doing a soft reset. L2 * Cache locking for instance is not cleared unless BIST is * enabled. Unfortunately due to a chip errata G-200 for - * Cn38XX and CN31XX, BIST msut be disabled on these parts. + * Cn38XX and CN31XX, BIST must be disabled on these parts. */ if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) || OCTEON_IS_MODEL(OCTEON_CN31XX)) diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index 7a7af706e898..1788ae23bff9 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -15,7 +15,7 @@ CONFIG_EXPERT=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y CONFIG_PROFILING=y -CONFIG_MACH_LOONGSON64=y +CONFIG_MACH_LOONGSON2EF=y CONFIG_PCI=y CONFIG_MIPS32_O32=y CONFIG_MIPS32_N32=y diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index d44f1469cf64..f9f93427c9bd 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -12,7 +12,7 @@ CONFIG_LOG_BUF_SHIFT=15 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_PROFILING=y -CONFIG_MACH_LOONGSON64=y +CONFIG_MACH_LOONGSON2EF=y CONFIG_LEMOTE_MACH2F=y CONFIG_KEXEC=y # CONFIG_SECCOMP is not set diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index 90ee0084d786..c16a2330e84d 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -12,7 +12,6 @@ CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_LOG_BUF_SHIFT=14 CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y CONFIG_BLK_CGROUP=y @@ -24,7 +23,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_MACH_LOONGSON64=y -CONFIG_LOONGSON_MACH3X=y CONFIG_SMP=y CONFIG_HZ_256=y CONFIG_KEXEC=y diff --git a/arch/mips/crypto/Makefile b/arch/mips/crypto/Makefile index e07aca572c2e..8e1deaf00e0c 100644 --- a/arch/mips/crypto/Makefile +++ b/arch/mips/crypto/Makefile @@ -4,3 +4,21 @@ # obj-$(CONFIG_CRYPTO_CRC32_MIPS) += crc32-mips.o + +obj-$(CONFIG_CRYPTO_CHACHA_MIPS) += chacha-mips.o +chacha-mips-y := chacha-core.o chacha-glue.o +AFLAGS_chacha-core.o += -O2 # needed to fill branch delay slots + +obj-$(CONFIG_CRYPTO_POLY1305_MIPS) += poly1305-mips.o +poly1305-mips-y := poly1305-core.o poly1305-glue.o + +perlasm-flavour-$(CONFIG_CPU_MIPS32) := o32 +perlasm-flavour-$(CONFIG_CPU_MIPS64) := 64 + +quiet_cmd_perlasm = PERLASM $@ + cmd_perlasm = $(PERL) $(<) $(perlasm-flavour-y) $(@) + +$(obj)/poly1305-core.S: $(src)/poly1305-mips.pl FORCE + $(call if_changed,perlasm) + +targets += poly1305-core.S diff --git a/arch/mips/crypto/chacha-core.S b/arch/mips/crypto/chacha-core.S new file mode 100644 index 000000000000..5755f69cfe00 --- /dev/null +++ b/arch/mips/crypto/chacha-core.S @@ -0,0 +1,497 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +/* + * Copyright (C) 2016-2018 René van Dorst <opensource@vdorst.com>. All Rights Reserved. + * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. + */ + +#define MASK_U32 0x3c +#define CHACHA20_BLOCK_SIZE 64 +#define STACK_SIZE 32 + +#define X0 $t0 +#define X1 $t1 +#define X2 $t2 +#define X3 $t3 +#define X4 $t4 +#define X5 $t5 +#define X6 $t6 +#define X7 $t7 +#define X8 $t8 +#define X9 $t9 +#define X10 $v1 +#define X11 $s6 +#define X12 $s5 +#define X13 $s4 +#define X14 $s3 +#define X15 $s2 +/* Use regs which are overwritten on exit for Tx so we don't leak clear data. */ +#define T0 $s1 +#define T1 $s0 +#define T(n) T ## n +#define X(n) X ## n + +/* Input arguments */ +#define STATE $a0 +#define OUT $a1 +#define IN $a2 +#define BYTES $a3 + +/* Output argument */ +/* NONCE[0] is kept in a register and not in memory. + * We don't want to touch original value in memory. + * Must be incremented every loop iteration. + */ +#define NONCE_0 $v0 + +/* SAVED_X and SAVED_CA are set in the jump table. + * Use regs which are overwritten on exit else we don't leak clear data. + * They are used to handling the last bytes which are not multiple of 4. + */ +#define SAVED_X X15 +#define SAVED_CA $s7 + +#define IS_UNALIGNED $s7 + +#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ +#define MSB 0 +#define LSB 3 +#define ROTx rotl +#define ROTR(n) rotr n, 24 +#define CPU_TO_LE32(n) \ + wsbh n; \ + rotr n, 16; +#else +#define MSB 3 +#define LSB 0 +#define ROTx rotr +#define CPU_TO_LE32(n) +#define ROTR(n) +#endif + +#define FOR_EACH_WORD(x) \ + x( 0); \ + x( 1); \ + x( 2); \ + x( 3); \ + x( 4); \ + x( 5); \ + x( 6); \ + x( 7); \ + x( 8); \ + x( 9); \ + x(10); \ + x(11); \ + x(12); \ + x(13); \ + x(14); \ + x(15); + +#define FOR_EACH_WORD_REV(x) \ + x(15); \ + x(14); \ + x(13); \ + x(12); \ + x(11); \ + x(10); \ + x( 9); \ + x( 8); \ + x( 7); \ + x( 6); \ + x( 5); \ + x( 4); \ + x( 3); \ + x( 2); \ + x( 1); \ + x( 0); + +#define PLUS_ONE_0 1 +#define PLUS_ONE_1 2 +#define PLUS_ONE_2 3 +#define PLUS_ONE_3 4 +#define PLUS_ONE_4 5 +#define PLUS_ONE_5 6 +#define PLUS_ONE_6 7 +#define PLUS_ONE_7 8 +#define PLUS_ONE_8 9 +#define PLUS_ONE_9 10 +#define PLUS_ONE_10 11 +#define PLUS_ONE_11 12 +#define PLUS_ONE_12 13 +#define PLUS_ONE_13 14 +#define PLUS_ONE_14 15 +#define PLUS_ONE_15 16 +#define PLUS_ONE(x) PLUS_ONE_ ## x +#define _CONCAT3(a,b,c) a ## b ## c +#define CONCAT3(a,b,c) _CONCAT3(a,b,c) + +#define STORE_UNALIGNED(x) \ +CONCAT3(.Lchacha_mips_xor_unaligned_, PLUS_ONE(x), _b: ;) \ + .if (x != 12); \ + lw T0, (x*4)(STATE); \ + .endif; \ + lwl T1, (x*4)+MSB ## (IN); \ + lwr T1, (x*4)+LSB ## (IN); \ + .if (x == 12); \ + addu X ## x, NONCE_0; \ + .else; \ + addu X ## x, T0; \ + .endif; \ + CPU_TO_LE32(X ## x); \ + xor X ## x, T1; \ + swl X ## x, (x*4)+MSB ## (OUT); \ + swr X ## x, (x*4)+LSB ## (OUT); + +#define STORE_ALIGNED(x) \ +CONCAT3(.Lchacha_mips_xor_aligned_, PLUS_ONE(x), _b: ;) \ + .if (x != 12); \ + lw T0, (x*4)(STATE); \ + .endif; \ + lw T1, (x*4) ## (IN); \ + .if (x == 12); \ + addu X ## x, NONCE_0; \ + .else; \ + addu X ## x, T0; \ + .endif; \ + CPU_TO_LE32(X ## x); \ + xor X ## x, T1; \ + sw X ## x, (x*4) ## (OUT); + +/* Jump table macro. + * Used for setup and handling the last bytes, which are not multiple of 4. + * X15 is free to store Xn + * Every jumptable entry must be equal in size. + */ +#define JMPTBL_ALIGNED(x) \ +.Lchacha_mips_jmptbl_aligned_ ## x: ; \ + .set noreorder; \ + b .Lchacha_mips_xor_aligned_ ## x ## _b; \ + .if (x == 12); \ + addu SAVED_X, X ## x, NONCE_0; \ + .else; \ + addu SAVED_X, X ## x, SAVED_CA; \ + .endif; \ + .set reorder + +#define JMPTBL_UNALIGNED(x) \ +.Lchacha_mips_jmptbl_unaligned_ ## x: ; \ + .set noreorder; \ + b .Lchacha_mips_xor_unaligned_ ## x ## _b; \ + .if (x == 12); \ + addu SAVED_X, X ## x, NONCE_0; \ + .else; \ + addu SAVED_X, X ## x, SAVED_CA; \ + .endif; \ + .set reorder + +#define AXR(A, B, C, D, K, L, M, N, V, W, Y, Z, S) \ + addu X(A), X(K); \ + addu X(B), X(L); \ + addu X(C), X(M); \ + addu X(D), X(N); \ + xor X(V), X(A); \ + xor X(W), X(B); \ + xor X(Y), X(C); \ + xor X(Z), X(D); \ + rotl X(V), S; \ + rotl X(W), S; \ + rotl X(Y), S; \ + rotl X(Z), S; + +.text +.set reorder +.set noat +.globl chacha_crypt_arch +.ent chacha_crypt_arch +chacha_crypt_arch: + .frame $sp, STACK_SIZE, $ra + + /* Load number of rounds */ + lw $at, 16($sp) + + addiu $sp, -STACK_SIZE + + /* Return bytes = 0. */ + beqz BYTES, .Lchacha_mips_end + + lw NONCE_0, 48(STATE) + + /* Save s0-s7 */ + sw $s0, 0($sp) + sw $s1, 4($sp) + sw $s2, 8($sp) + sw $s3, 12($sp) + sw $s4, 16($sp) + sw $s5, 20($sp) + sw $s6, 24($sp) + sw $s7, 28($sp) + + /* Test IN or OUT is unaligned. + * IS_UNALIGNED = ( IN | OUT ) & 0x00000003 + */ + or IS_UNALIGNED, IN, OUT + andi IS_UNALIGNED, 0x3 + + b .Lchacha_rounds_start + +.align 4 +.Loop_chacha_rounds: + addiu IN, CHACHA20_BLOCK_SIZE + addiu OUT, CHACHA20_BLOCK_SIZE + addiu NONCE_0, 1 + +.Lchacha_rounds_start: + lw X0, 0(STATE) + lw X1, 4(STATE) + lw X2, 8(STATE) + lw X3, 12(STATE) + + lw X4, 16(STATE) + lw X5, 20(STATE) + lw X6, 24(STATE) + lw X7, 28(STATE) + lw X8, 32(STATE) + lw X9, 36(STATE) + lw X10, 40(STATE) + lw X11, 44(STATE) + + move X12, NONCE_0 + lw X13, 52(STATE) + lw X14, 56(STATE) + lw X15, 60(STATE) + +.Loop_chacha_xor_rounds: + addiu $at, -2 + AXR( 0, 1, 2, 3, 4, 5, 6, 7, 12,13,14,15, 16); + AXR( 8, 9,10,11, 12,13,14,15, 4, 5, 6, 7, 12); + AXR( 0, 1, 2, 3, 4, 5, 6, 7, 12,13,14,15, 8); + AXR( 8, 9,10,11, 12,13,14,15, 4, 5, 6, 7, 7); + AXR( 0, 1, 2, 3, 5, 6, 7, 4, 15,12,13,14, 16); + AXR(10,11, 8, 9, 15,12,13,14, 5, 6, 7, 4, 12); + AXR( 0, 1, 2, 3, 5, 6, 7, 4, 15,12,13,14, 8); + AXR(10,11, 8, 9, 15,12,13,14, 5, 6, 7, 4, 7); + bnez $at, .Loop_chacha_xor_rounds + + addiu BYTES, -(CHACHA20_BLOCK_SIZE) + + /* Is data src/dst unaligned? Jump */ + bnez IS_UNALIGNED, .Loop_chacha_unaligned + + /* Set number rounds here to fill delayslot. */ + lw $at, (STACK_SIZE+16)($sp) + + /* BYTES < 0, it has no full block. */ + bltz BYTES, .Lchacha_mips_no_full_block_aligned + + FOR_EACH_WORD_REV(STORE_ALIGNED) + + /* BYTES > 0? Loop again. */ + bgtz BYTES, .Loop_chacha_rounds + + /* Place this here to fill delay slot */ + addiu NONCE_0, 1 + + /* BYTES < 0? Handle last bytes */ + bltz BYTES, .Lchacha_mips_xor_bytes + +.Lchacha_mips_xor_done: + /* Restore used registers */ + lw $s0, 0($sp) + lw $s1, 4($sp) + lw $s2, 8($sp) + lw $s3, 12($sp) + lw $s4, 16($sp) + lw $s5, 20($sp) + lw $s6, 24($sp) + lw $s7, 28($sp) + + /* Write NONCE_0 back to right location in state */ + sw NONCE_0, 48(STATE) + +.Lchacha_mips_end: + addiu $sp, STACK_SIZE + jr $ra + +.Lchacha_mips_no_full_block_aligned: + /* Restore the offset on BYTES */ + addiu BYTES, CHACHA20_BLOCK_SIZE + + /* Get number of full WORDS */ + andi $at, BYTES, MASK_U32 + + /* Load upper half of jump table addr */ + lui T0, %hi(.Lchacha_mips_jmptbl_aligned_0) + + /* Calculate lower half jump table offset */ + ins T0, $at, 1, 6 + + /* Add offset to STATE */ + addu T1, STATE, $at + + /* Add lower half jump table addr */ + addiu T0, %lo(.Lchacha_mips_jmptbl_aligned_0) + + /* Read value from STATE */ + lw SAVED_CA, 0(T1) + + /* Store remaining bytecounter as negative value */ + subu BYTES, $at, BYTES + + jr T0 + + /* Jump table */ + FOR_EACH_WORD(JMPTBL_ALIGNED) + + +.Loop_chacha_unaligned: + /* Set number rounds here to fill delayslot. */ + lw $at, (STACK_SIZE+16)($sp) + + /* BYTES > 0, it has no full block. */ + bltz BYTES, .Lchacha_mips_no_full_block_unaligned + + FOR_EACH_WORD_REV(STORE_UNALIGNED) + + /* BYTES > 0? Loop again. */ + bgtz BYTES, .Loop_chacha_rounds + + /* Write NONCE_0 back to right location in state */ + sw NONCE_0, 48(STATE) + + .set noreorder + /* Fall through to byte handling */ + bgez BYTES, .Lchacha_mips_xor_done +.Lchacha_mips_xor_unaligned_0_b: +.Lchacha_mips_xor_aligned_0_b: + /* Place this here to fill delay slot */ + addiu NONCE_0, 1 + .set reorder + +.Lchacha_mips_xor_bytes: + addu IN, $at + addu OUT, $at + /* First byte */ + lbu T1, 0(IN) + addiu $at, BYTES, 1 + CPU_TO_LE32(SAVED_X) + ROTR(SAVED_X) + xor T1, SAVED_X + sb T1, 0(OUT) + beqz $at, .Lchacha_mips_xor_done + /* Second byte */ + lbu T1, 1(IN) + addiu $at, BYTES, 2 + ROTx SAVED_X, 8 + xor T1, SAVED_X + sb T1, 1(OUT) + beqz $at, .Lchacha_mips_xor_done + /* Third byte */ + lbu T1, 2(IN) + ROTx SAVED_X, 8 + xor T1, SAVED_X + sb T1, 2(OUT) + b .Lchacha_mips_xor_done + +.Lchacha_mips_no_full_block_unaligned: + /* Restore the offset on BYTES */ + addiu BYTES, CHACHA20_BLOCK_SIZE + + /* Get number of full WORDS */ + andi $at, BYTES, MASK_U32 + + /* Load upper half of jump table addr */ + lui T0, %hi(.Lchacha_mips_jmptbl_unaligned_0) + + /* Calculate lower half jump table offset */ + ins T0, $at, 1, 6 + + /* Add offset to STATE */ + addu T1, STATE, $at + + /* Add lower half jump table addr */ + addiu T0, %lo(.Lchacha_mips_jmptbl_unaligned_0) + + /* Read value from STATE */ + lw SAVED_CA, 0(T1) + + /* Store remaining bytecounter as negative value */ + subu BYTES, $at, BYTES + + jr T0 + + /* Jump table */ + FOR_EACH_WORD(JMPTBL_UNALIGNED) +.end chacha_crypt_arch +.set at + +/* Input arguments + * STATE $a0 + * OUT $a1 + * NROUND $a2 + */ + +#undef X12 +#undef X13 +#undef X14 +#undef X15 + +#define X12 $a3 +#define X13 $at +#define X14 $v0 +#define X15 STATE + +.set noat +.globl hchacha_block_arch +.ent hchacha_block_arch +hchacha_block_arch: + .frame $sp, STACK_SIZE, $ra + + addiu $sp, -STACK_SIZE + + /* Save X11(s6) */ + sw X11, 0($sp) + + lw X0, 0(STATE) + lw X1, 4(STATE) + lw X2, 8(STATE) + lw X3, 12(STATE) + lw X4, 16(STATE) + lw X5, 20(STATE) + lw X6, 24(STATE) + lw X7, 28(STATE) + lw X8, 32(STATE) + lw X9, 36(STATE) + lw X10, 40(STATE) + lw X11, 44(STATE) + lw X12, 48(STATE) + lw X13, 52(STATE) + lw X14, 56(STATE) + lw X15, 60(STATE) + +.Loop_hchacha_xor_rounds: + addiu $a2, -2 + AXR( 0, 1, 2, 3, 4, 5, 6, 7, 12,13,14,15, 16); + AXR( 8, 9,10,11, 12,13,14,15, 4, 5, 6, 7, 12); + AXR( 0, 1, 2, 3, 4, 5, 6, 7, 12,13,14,15, 8); + AXR( 8, 9,10,11, 12,13,14,15, 4, 5, 6, 7, 7); + AXR( 0, 1, 2, 3, 5, 6, 7, 4, 15,12,13,14, 16); + AXR(10,11, 8, 9, 15,12,13,14, 5, 6, 7, 4, 12); + AXR( 0, 1, 2, 3, 5, 6, 7, 4, 15,12,13,14, 8); + AXR(10,11, 8, 9, 15,12,13,14, 5, 6, 7, 4, 7); + bnez $a2, .Loop_hchacha_xor_rounds + + /* Restore used register */ + lw X11, 0($sp) + + sw X0, 0(OUT) + sw X1, 4(OUT) + sw X2, 8(OUT) + sw X3, 12(OUT) + sw X12, 16(OUT) + sw X13, 20(OUT) + sw X14, 24(OUT) + sw X15, 28(OUT) + + addiu $sp, STACK_SIZE + jr $ra +.end hchacha_block_arch +.set at diff --git a/arch/mips/crypto/chacha-glue.c b/arch/mips/crypto/chacha-glue.c new file mode 100644 index 000000000000..779e399c9bef --- /dev/null +++ b/arch/mips/crypto/chacha-glue.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MIPS accelerated ChaCha and XChaCha stream ciphers, + * including ChaCha20 (RFC7539) + * + * Copyright (C) 2019 Linaro, Ltd. <ard.biesheuvel@linaro.org> + */ + +#include <asm/byteorder.h> +#include <crypto/algapi.h> +#include <crypto/internal/chacha.h> +#include <crypto/internal/skcipher.h> +#include <linux/kernel.h> +#include <linux/module.h> + +asmlinkage void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, + unsigned int bytes, int nrounds); +EXPORT_SYMBOL(chacha_crypt_arch); + +asmlinkage void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds); +EXPORT_SYMBOL(hchacha_block_arch); + +void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv) +{ + chacha_init_generic(state, key, iv); +} +EXPORT_SYMBOL(chacha_init_arch); + +static int chacha_mips_stream_xor(struct skcipher_request *req, + const struct chacha_ctx *ctx, const u8 *iv) +{ + struct skcipher_walk walk; + u32 state[16]; + int err; + + err = skcipher_walk_virt(&walk, req, false); + + chacha_init_generic(state, ctx->key, iv); + + while (walk.nbytes > 0) { + unsigned int nbytes = walk.nbytes; + + if (nbytes < walk.total) + nbytes = round_down(nbytes, walk.stride); + + chacha_crypt(state, walk.dst.virt.addr, walk.src.virt.addr, + nbytes, ctx->nrounds); + err = skcipher_walk_done(&walk, walk.nbytes - nbytes); + } + + return err; +} + +static int chacha_mips(struct skcipher_request *req) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm); + + return chacha_mips_stream_xor(req, ctx, req->iv); +} + +static int xchacha_mips(struct skcipher_request *req) +{ + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); + struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm); + struct chacha_ctx subctx; + u32 state[16]; + u8 real_iv[16]; + + chacha_init_generic(state, ctx->key, req->iv); + + hchacha_block(state, subctx.key, ctx->nrounds); + subctx.nrounds = ctx->nrounds; + + memcpy(&real_iv[0], req->iv + 24, 8); + memcpy(&real_iv[8], req->iv + 16, 8); + return chacha_mips_stream_xor(req, &subctx, real_iv); +} + +static struct skcipher_alg algs[] = { + { + .base.cra_name = "chacha20", + .base.cra_driver_name = "chacha20-mips", + .base.cra_priority = 200, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct chacha_ctx), + .base.cra_module = THIS_MODULE, + + .min_keysize = CHACHA_KEY_SIZE, + .max_keysize = CHACHA_KEY_SIZE, + .ivsize = CHACHA_IV_SIZE, + .chunksize = CHACHA_BLOCK_SIZE, + .setkey = chacha20_setkey, + .encrypt = chacha_mips, + .decrypt = chacha_mips, + }, { + .base.cra_name = "xchacha20", + .base.cra_driver_name = "xchacha20-mips", + .base.cra_priority = 200, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct chacha_ctx), + .base.cra_module = THIS_MODULE, + + .min_keysize = CHACHA_KEY_SIZE, + .max_keysize = CHACHA_KEY_SIZE, + .ivsize = XCHACHA_IV_SIZE, + .chunksize = CHACHA_BLOCK_SIZE, + .setkey = chacha20_setkey, + .encrypt = xchacha_mips, + .decrypt = xchacha_mips, + }, { + .base.cra_name = "xchacha12", + .base.cra_driver_name = "xchacha12-mips", + .base.cra_priority = 200, + .base.cra_blocksize = 1, + .base.cra_ctxsize = sizeof(struct chacha_ctx), + .base.cra_module = THIS_MODULE, + + .min_keysize = CHACHA_KEY_SIZE, + .max_keysize = CHACHA_KEY_SIZE, + .ivsize = XCHACHA_IV_SIZE, + .chunksize = CHACHA_BLOCK_SIZE, + .setkey = chacha12_setkey, + .encrypt = xchacha_mips, + .decrypt = xchacha_mips, + } +}; + +static int __init chacha_simd_mod_init(void) +{ + return crypto_register_skciphers(algs, ARRAY_SIZE(algs)); +} + +static void __exit chacha_simd_mod_fini(void) +{ + crypto_unregister_skciphers(algs, ARRAY_SIZE(algs)); +} + +module_init(chacha_simd_mod_init); +module_exit(chacha_simd_mod_fini); + +MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (MIPS accelerated)"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("chacha20"); +MODULE_ALIAS_CRYPTO("chacha20-mips"); +MODULE_ALIAS_CRYPTO("xchacha20"); +MODULE_ALIAS_CRYPTO("xchacha20-mips"); +MODULE_ALIAS_CRYPTO("xchacha12"); +MODULE_ALIAS_CRYPTO("xchacha12-mips"); diff --git a/arch/mips/crypto/poly1305-glue.c b/arch/mips/crypto/poly1305-glue.c new file mode 100644 index 000000000000..b759b6ccc361 --- /dev/null +++ b/arch/mips/crypto/poly1305-glue.c @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * OpenSSL/Cryptogams accelerated Poly1305 transform for MIPS + * + * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org> + */ + +#include <asm/unaligned.h> +#include <crypto/algapi.h> +#include <crypto/internal/hash.h> +#include <crypto/internal/poly1305.h> +#include <linux/cpufeature.h> +#include <linux/crypto.h> +#include <linux/module.h> + +asmlinkage void poly1305_init_mips(void *state, const u8 *key); +asmlinkage void poly1305_blocks_mips(void *state, const u8 *src, u32 len, u32 hibit); +asmlinkage void poly1305_emit_mips(void *state, __le32 *digest, const u32 *nonce); + +void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key) +{ + poly1305_init_mips(&dctx->h, key); + dctx->s[0] = get_unaligned_le32(key + 16); + dctx->s[1] = get_unaligned_le32(key + 20); + dctx->s[2] = get_unaligned_le32(key + 24); + dctx->s[3] = get_unaligned_le32(key + 28); + dctx->buflen = 0; +} +EXPORT_SYMBOL(poly1305_init_arch); + +static int mips_poly1305_init(struct shash_desc *desc) +{ + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + + dctx->buflen = 0; + dctx->rset = 0; + dctx->sset = false; + + return 0; +} + +static void mips_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src, + u32 len, u32 hibit) +{ + if (unlikely(!dctx->sset)) { + if (!dctx->rset) { + poly1305_init_mips(&dctx->h, src); + src += POLY1305_BLOCK_SIZE; + len -= POLY1305_BLOCK_SIZE; + dctx->rset = 1; + } + if (len >= POLY1305_BLOCK_SIZE) { + dctx->s[0] = get_unaligned_le32(src + 0); + dctx->s[1] = get_unaligned_le32(src + 4); + dctx->s[2] = get_unaligned_le32(src + 8); + dctx->s[3] = get_unaligned_le32(src + 12); + src += POLY1305_BLOCK_SIZE; + len -= POLY1305_BLOCK_SIZE; + dctx->sset = true; + } + if (len < POLY1305_BLOCK_SIZE) + return; + } + + len &= ~(POLY1305_BLOCK_SIZE - 1); + + poly1305_blocks_mips(&dctx->h, src, len, hibit); +} + +static int mips_poly1305_update(struct shash_desc *desc, const u8 *src, + unsigned int len) +{ + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + + if (unlikely(dctx->buflen)) { + u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen); + + memcpy(dctx->buf + dctx->buflen, src, bytes); + src += bytes; + len -= bytes; + dctx->buflen += bytes; + + if (dctx->buflen == POLY1305_BLOCK_SIZE) { + mips_poly1305_blocks(dctx, dctx->buf, POLY1305_BLOCK_SIZE, 1); + dctx->buflen = 0; + } + } + + if (likely(len >= POLY1305_BLOCK_SIZE)) { + mips_poly1305_blocks(dctx, src, len, 1); + src += round_down(len, POLY1305_BLOCK_SIZE); + len %= POLY1305_BLOCK_SIZE; + } + + if (unlikely(len)) { + dctx->buflen = len; + memcpy(dctx->buf, src, len); + } + return 0; +} + +void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src, + unsigned int nbytes) +{ + if (unlikely(dctx->buflen)) { + u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen); + + memcpy(dctx->buf + dctx->buflen, src, bytes); + src += bytes; + nbytes -= bytes; + dctx->buflen += bytes; + + if (dctx->buflen == POLY1305_BLOCK_SIZE) { + poly1305_blocks_mips(&dctx->h, dctx->buf, + POLY1305_BLOCK_SIZE, 1); + dctx->buflen = 0; + } + } + + if (likely(nbytes >= POLY1305_BLOCK_SIZE)) { + unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE); + + poly1305_blocks_mips(&dctx->h, src, len, 1); + src += len; + nbytes %= POLY1305_BLOCK_SIZE; + } + + if (unlikely(nbytes)) { + dctx->buflen = nbytes; + memcpy(dctx->buf, src, nbytes); + } +} +EXPORT_SYMBOL(poly1305_update_arch); + +void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst) +{ + __le32 digest[4]; + u64 f = 0; + + if (unlikely(dctx->buflen)) { + dctx->buf[dctx->buflen++] = 1; + memset(dctx->buf + dctx->buflen, 0, + POLY1305_BLOCK_SIZE - dctx->buflen); + poly1305_blocks_mips(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0); + } + + poly1305_emit_mips(&dctx->h, digest, dctx->s); + + /* mac = (h + s) % (2^128) */ + f = (f >> 32) + le32_to_cpu(digest[0]); + put_unaligned_le32(f, dst); + f = (f >> 32) + le32_to_cpu(digest[1]); + put_unaligned_le32(f, dst + 4); + f = (f >> 32) + le32_to_cpu(digest[2]); + put_unaligned_le32(f, dst + 8); + f = (f >> 32) + le32_to_cpu(digest[3]); + put_unaligned_le32(f, dst + 12); + + *dctx = (struct poly1305_desc_ctx){}; +} +EXPORT_SYMBOL(poly1305_final_arch); + +static int mips_poly1305_final(struct shash_desc *desc, u8 *dst) +{ + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + + if (unlikely(!dctx->sset)) + return -ENOKEY; + + poly1305_final_arch(dctx, dst); + return 0; +} + +static struct shash_alg mips_poly1305_alg = { + .init = mips_poly1305_init, + .update = mips_poly1305_update, + .final = mips_poly1305_final, + .digestsize = POLY1305_DIGEST_SIZE, + .descsize = sizeof(struct poly1305_desc_ctx), + + .base.cra_name = "poly1305", + .base.cra_driver_name = "poly1305-mips", + .base.cra_priority = 200, + .base.cra_blocksize = POLY1305_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, +}; + +static int __init mips_poly1305_mod_init(void) +{ + return crypto_register_shash(&mips_poly1305_alg); +} + +static void __exit mips_poly1305_mod_exit(void) +{ + crypto_unregister_shash(&mips_poly1305_alg); +} + +module_init(mips_poly1305_mod_init); +module_exit(mips_poly1305_mod_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("poly1305"); +MODULE_ALIAS_CRYPTO("poly1305-mips"); diff --git a/arch/mips/crypto/poly1305-mips.pl b/arch/mips/crypto/poly1305-mips.pl new file mode 100644 index 000000000000..b05bab884ed2 --- /dev/null +++ b/arch/mips/crypto/poly1305-mips.pl @@ -0,0 +1,1273 @@ +#!/usr/bin/env perl +# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause +# +# ==================================================================== +# Written by Andy Polyakov, @dot-asm, originally for the OpenSSL +# project. +# ==================================================================== + +# Poly1305 hash for MIPS. +# +# May 2016 +# +# Numbers are cycles per processed byte with poly1305_blocks alone. +# +# IALU/gcc +# R1x000 ~5.5/+130% (big-endian) +# Octeon II 2.50/+70% (little-endian) +# +# March 2019 +# +# Add 32-bit code path. +# +# October 2019 +# +# Modulo-scheduling reduction allows to omit dependency chain at the +# end of inner loop and improve performance. Also optimize MIPS32R2 +# code path for MIPS 1004K core. Per René von Dorst's suggestions. +# +# IALU/gcc +# R1x000 ~9.8/? (big-endian) +# Octeon II 3.65/+140% (little-endian) +# MT7621/1004K 4.75/? (little-endian) +# +###################################################################### +# There is a number of MIPS ABI in use, O32 and N32/64 are most +# widely used. Then there is a new contender: NUBI. It appears that if +# one picks the latter, it's possible to arrange code in ABI neutral +# manner. Therefore let's stick to NUBI register layout: +# +($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25)); +($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11)); +($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23)); +($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31)); +# +# The return value is placed in $a0. Following coding rules facilitate +# interoperability: +# +# - never ever touch $tp, "thread pointer", former $gp [o32 can be +# excluded from the rule, because it's specified volatile]; +# - copy return value to $t0, former $v0 [or to $a0 if you're adapting +# old code]; +# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary; +# +# For reference here is register layout for N32/64 MIPS ABIs: +# +# ($zero,$at,$v0,$v1)=map("\$$_",(0..3)); +# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11)); +# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25)); +# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23)); +# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31)); +# +# <appro@openssl.org> +# +###################################################################### + +$flavour = shift || "64"; # supported flavours are o32,n32,64,nubi32,nubi64 + +$v0 = ($flavour =~ /nubi/i) ? $a0 : $t0; + +if ($flavour =~ /64|n32/i) {{{ +###################################################################### +# 64-bit code path +# + +my ($ctx,$inp,$len,$padbit) = ($a0,$a1,$a2,$a3); +my ($in0,$in1,$tmp0,$tmp1,$tmp2,$tmp3,$tmp4) = ($a4,$a5,$a6,$a7,$at,$t0,$t1); + +$code.=<<___; +#if (defined(_MIPS_ARCH_MIPS64R3) || defined(_MIPS_ARCH_MIPS64R5) || \\ + defined(_MIPS_ARCH_MIPS64R6)) \\ + && !defined(_MIPS_ARCH_MIPS64R2) +# define _MIPS_ARCH_MIPS64R2 +#endif + +#if defined(_MIPS_ARCH_MIPS64R6) +# define dmultu(rs,rt) +# define mflo(rd,rs,rt) dmulu rd,rs,rt +# define mfhi(rd,rs,rt) dmuhu rd,rs,rt +#else +# define dmultu(rs,rt) dmultu rs,rt +# define mflo(rd,rs,rt) mflo rd +# define mfhi(rd,rs,rt) mfhi rd +#endif + +#ifdef __KERNEL__ +# define poly1305_init poly1305_init_mips +# define poly1305_blocks poly1305_blocks_mips +# define poly1305_emit poly1305_emit_mips +#endif + +#if defined(__MIPSEB__) && !defined(MIPSEB) +# define MIPSEB +#endif + +#ifdef MIPSEB +# define MSB 0 +# define LSB 7 +#else +# define MSB 7 +# define LSB 0 +#endif + +.text +.set noat +.set noreorder + +.align 5 +.globl poly1305_init +.ent poly1305_init +poly1305_init: + .frame $sp,0,$ra + .set reorder + + sd $zero,0($ctx) + sd $zero,8($ctx) + sd $zero,16($ctx) + + beqz $inp,.Lno_key + +#if defined(_MIPS_ARCH_MIPS64R6) + andi $tmp0,$inp,7 # $inp % 8 + dsubu $inp,$inp,$tmp0 # align $inp + sll $tmp0,$tmp0,3 # byte to bit offset + ld $in0,0($inp) + ld $in1,8($inp) + beqz $tmp0,.Laligned_key + ld $tmp2,16($inp) + + subu $tmp1,$zero,$tmp0 +# ifdef MIPSEB + dsllv $in0,$in0,$tmp0 + dsrlv $tmp3,$in1,$tmp1 + dsllv $in1,$in1,$tmp0 + dsrlv $tmp2,$tmp2,$tmp1 +# else + dsrlv $in0,$in0,$tmp0 + dsllv $tmp3,$in1,$tmp1 + dsrlv $in1,$in1,$tmp0 + dsllv $tmp2,$tmp2,$tmp1 +# endif + or $in0,$in0,$tmp3 + or $in1,$in1,$tmp2 +.Laligned_key: +#else + ldl $in0,0+MSB($inp) + ldl $in1,8+MSB($inp) + ldr $in0,0+LSB($inp) + ldr $in1,8+LSB($inp) +#endif +#ifdef MIPSEB +# if defined(_MIPS_ARCH_MIPS64R2) + dsbh $in0,$in0 # byte swap + dsbh $in1,$in1 + dshd $in0,$in0 + dshd $in1,$in1 +# else + ori $tmp0,$zero,0xFF + dsll $tmp2,$tmp0,32 + or $tmp0,$tmp2 # 0x000000FF000000FF + + and $tmp1,$in0,$tmp0 # byte swap + and $tmp3,$in1,$tmp0 + dsrl $tmp2,$in0,24 + dsrl $tmp4,$in1,24 + dsll $tmp1,24 + dsll $tmp3,24 + and $tmp2,$tmp0 + and $tmp4,$tmp0 + dsll $tmp0,8 # 0x0000FF000000FF00 + or $tmp1,$tmp2 + or $tmp3,$tmp4 + and $tmp2,$in0,$tmp0 + and $tmp4,$in1,$tmp0 + dsrl $in0,8 + dsrl $in1,8 + dsll $tmp2,8 + dsll $tmp4,8 + and $in0,$tmp0 + and $in1,$tmp0 + or $tmp1,$tmp2 + or $tmp3,$tmp4 + or $in0,$tmp1 + or $in1,$tmp3 + dsrl $tmp1,$in0,32 + dsrl $tmp3,$in1,32 + dsll $in0,32 + dsll $in1,32 + or $in0,$tmp1 + or $in1,$tmp3 +# endif +#endif + li $tmp0,1 + dsll $tmp0,32 # 0x0000000100000000 + daddiu $tmp0,-63 # 0x00000000ffffffc1 + dsll $tmp0,28 # 0x0ffffffc10000000 + daddiu $tmp0,-1 # 0x0ffffffc0fffffff + + and $in0,$tmp0 + daddiu $tmp0,-3 # 0x0ffffffc0ffffffc + and $in1,$tmp0 + + sd $in0,24($ctx) + dsrl $tmp0,$in1,2 + sd $in1,32($ctx) + daddu $tmp0,$in1 # s1 = r1 + (r1 >> 2) + sd $tmp0,40($ctx) + +.Lno_key: + li $v0,0 # return 0 + jr $ra +.end poly1305_init +___ +{ +my $SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0x0003f000" : "0x00030000"; + +my ($h0,$h1,$h2,$r0,$r1,$rs1,$d0,$d1,$d2) = + ($s0,$s1,$s2,$s3,$s4,$s5,$in0,$in1,$t2); +my ($shr,$shl) = ($s6,$s7); # used on R6 + +$code.=<<___; +.align 5 +.globl poly1305_blocks +.ent poly1305_blocks +poly1305_blocks: + .set noreorder + dsrl $len,4 # number of complete blocks + bnez $len,poly1305_blocks_internal + nop + jr $ra + nop +.end poly1305_blocks + +.align 5 +.ent poly1305_blocks_internal +poly1305_blocks_internal: + .set noreorder +#if defined(_MIPS_ARCH_MIPS64R6) + .frame $sp,8*8,$ra + .mask $SAVED_REGS_MASK|0x000c0000,-8 + dsubu $sp,8*8 + sd $s7,56($sp) + sd $s6,48($sp) +#else + .frame $sp,6*8,$ra + .mask $SAVED_REGS_MASK,-8 + dsubu $sp,6*8 +#endif + sd $s5,40($sp) + sd $s4,32($sp) +___ +$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi prologue + sd $s3,24($sp) + sd $s2,16($sp) + sd $s1,8($sp) + sd $s0,0($sp) +___ +$code.=<<___; + .set reorder + +#if defined(_MIPS_ARCH_MIPS64R6) + andi $shr,$inp,7 + dsubu $inp,$inp,$shr # align $inp + sll $shr,$shr,3 # byte to bit offset + subu $shl,$zero,$shr +#endif + + ld $h0,0($ctx) # load hash value + ld $h1,8($ctx) + ld $h2,16($ctx) + + ld $r0,24($ctx) # load key + ld $r1,32($ctx) + ld $rs1,40($ctx) + + dsll $len,4 + daddu $len,$inp # end of buffer + b .Loop + +.align 4 +.Loop: +#if defined(_MIPS_ARCH_MIPS64R6) + ld $in0,0($inp) # load input + ld $in1,8($inp) + beqz $shr,.Laligned_inp + + ld $tmp2,16($inp) +# ifdef MIPSEB + dsllv $in0,$in0,$shr + dsrlv $tmp3,$in1,$shl + dsllv $in1,$in1,$shr + dsrlv $tmp2,$tmp2,$shl +# else + dsrlv $in0,$in0,$shr + dsllv $tmp3,$in1,$shl + dsrlv $in1,$in1,$shr + dsllv $tmp2,$tmp2,$shl +# endif + or $in0,$in0,$tmp3 + or $in1,$in1,$tmp2 +.Laligned_inp: +#else + ldl $in0,0+MSB($inp) # load input + ldl $in1,8+MSB($inp) + ldr $in0,0+LSB($inp) + ldr $in1,8+LSB($inp) +#endif + daddiu $inp,16 +#ifdef MIPSEB +# if defined(_MIPS_ARCH_MIPS64R2) + dsbh $in0,$in0 # byte swap + dsbh $in1,$in1 + dshd $in0,$in0 + dshd $in1,$in1 +# else + ori $tmp0,$zero,0xFF + dsll $tmp2,$tmp0,32 + or $tmp0,$tmp2 # 0x000000FF000000FF + + and $tmp1,$in0,$tmp0 # byte swap + and $tmp3,$in1,$tmp0 + dsrl $tmp2,$in0,24 + dsrl $tmp4,$in1,24 + dsll $tmp1,24 + dsll $tmp3,24 + and $tmp2,$tmp0 + and $tmp4,$tmp0 + dsll $tmp0,8 # 0x0000FF000000FF00 + or $tmp1,$tmp2 + or $tmp3,$tmp4 + and $tmp2,$in0,$tmp0 + and $tmp4,$in1,$tmp0 + dsrl $in0,8 + dsrl $in1,8 + dsll $tmp2,8 + dsll $tmp4,8 + and $in0,$tmp0 + and $in1,$tmp0 + or $tmp1,$tmp2 + or $tmp3,$tmp4 + or $in0,$tmp1 + or $in1,$tmp3 + dsrl $tmp1,$in0,32 + dsrl $tmp3,$in1,32 + dsll $in0,32 + dsll $in1,32 + or $in0,$tmp1 + or $in1,$tmp3 +# endif +#endif + dsrl $tmp1,$h2,2 # modulo-scheduled reduction + andi $h2,$h2,3 + dsll $tmp0,$tmp1,2 + + daddu $d0,$h0,$in0 # accumulate input + daddu $tmp1,$tmp0 + sltu $tmp0,$d0,$h0 + daddu $d0,$d0,$tmp1 # ... and residue + sltu $tmp1,$d0,$tmp1 + daddu $d1,$h1,$in1 + daddu $tmp0,$tmp1 + sltu $tmp1,$d1,$h1 + daddu $d1,$tmp0 + + dmultu ($r0,$d0) # h0*r0 + daddu $d2,$h2,$padbit + sltu $tmp0,$d1,$tmp0 + mflo ($h0,$r0,$d0) + mfhi ($h1,$r0,$d0) + + dmultu ($rs1,$d1) # h1*5*r1 + daddu $d2,$tmp1 + daddu $d2,$tmp0 + mflo ($tmp0,$rs1,$d1) + mfhi ($tmp1,$rs1,$d1) + + dmultu ($r1,$d0) # h0*r1 + mflo ($tmp2,$r1,$d0) + mfhi ($h2,$r1,$d0) + daddu $h0,$tmp0 + daddu $h1,$tmp1 + sltu $tmp0,$h0,$tmp0 + + dmultu ($r0,$d1) # h1*r0 + daddu $h1,$tmp0 + daddu $h1,$tmp2 + mflo ($tmp0,$r0,$d1) + mfhi ($tmp1,$r0,$d1) + + dmultu ($rs1,$d2) # h2*5*r1 + sltu $tmp2,$h1,$tmp2 + daddu $h2,$tmp2 + mflo ($tmp2,$rs1,$d2) + + dmultu ($r0,$d2) # h2*r0 + daddu $h1,$tmp0 + daddu $h2,$tmp1 + mflo ($tmp3,$r0,$d2) + sltu $tmp0,$h1,$tmp0 + daddu $h2,$tmp0 + + daddu $h1,$tmp2 + sltu $tmp2,$h1,$tmp2 + daddu $h2,$tmp2 + daddu $h2,$tmp3 + + bne $inp,$len,.Loop + + sd $h0,0($ctx) # store hash value + sd $h1,8($ctx) + sd $h2,16($ctx) + + .set noreorder +#if defined(_MIPS_ARCH_MIPS64R6) + ld $s7,56($sp) + ld $s6,48($sp) +#endif + ld $s5,40($sp) # epilogue + ld $s4,32($sp) +___ +$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi epilogue + ld $s3,24($sp) + ld $s2,16($sp) + ld $s1,8($sp) + ld $s0,0($sp) +___ +$code.=<<___; + jr $ra +#if defined(_MIPS_ARCH_MIPS64R6) + daddu $sp,8*8 +#else + daddu $sp,6*8 +#endif +.end poly1305_blocks_internal +___ +} +{ +my ($ctx,$mac,$nonce) = ($a0,$a1,$a2); + +$code.=<<___; +.align 5 +.globl poly1305_emit +.ent poly1305_emit +poly1305_emit: + .frame $sp,0,$ra + .set reorder + + ld $tmp2,16($ctx) + ld $tmp0,0($ctx) + ld $tmp1,8($ctx) + + li $in0,-4 # final reduction + dsrl $in1,$tmp2,2 + and $in0,$tmp2 + andi $tmp2,$tmp2,3 + daddu $in0,$in1 + + daddu $tmp0,$tmp0,$in0 + sltu $in1,$tmp0,$in0 + daddiu $in0,$tmp0,5 # compare to modulus + daddu $tmp1,$tmp1,$in1 + sltiu $tmp3,$in0,5 + sltu $tmp4,$tmp1,$in1 + daddu $in1,$tmp1,$tmp3 + daddu $tmp2,$tmp2,$tmp4 + sltu $tmp3,$in1,$tmp3 + daddu $tmp2,$tmp2,$tmp3 + + dsrl $tmp2,2 # see if it carried/borrowed + dsubu $tmp2,$zero,$tmp2 + + xor $in0,$tmp0 + xor $in1,$tmp1 + and $in0,$tmp2 + and $in1,$tmp2 + xor $in0,$tmp0 + xor $in1,$tmp1 + + lwu $tmp0,0($nonce) # load nonce + lwu $tmp1,4($nonce) + lwu $tmp2,8($nonce) + lwu $tmp3,12($nonce) + dsll $tmp1,32 + dsll $tmp3,32 + or $tmp0,$tmp1 + or $tmp2,$tmp3 + + daddu $in0,$tmp0 # accumulate nonce + daddu $in1,$tmp2 + sltu $tmp0,$in0,$tmp0 + daddu $in1,$tmp0 + + dsrl $tmp0,$in0,8 # write mac value + dsrl $tmp1,$in0,16 + dsrl $tmp2,$in0,24 + sb $in0,0($mac) + dsrl $tmp3,$in0,32 + sb $tmp0,1($mac) + dsrl $tmp0,$in0,40 + sb $tmp1,2($mac) + dsrl $tmp1,$in0,48 + sb $tmp2,3($mac) + dsrl $tmp2,$in0,56 + sb $tmp3,4($mac) + dsrl $tmp3,$in1,8 + sb $tmp0,5($mac) + dsrl $tmp0,$in1,16 + sb $tmp1,6($mac) + dsrl $tmp1,$in1,24 + sb $tmp2,7($mac) + + sb $in1,8($mac) + dsrl $tmp2,$in1,32 + sb $tmp3,9($mac) + dsrl $tmp3,$in1,40 + sb $tmp0,10($mac) + dsrl $tmp0,$in1,48 + sb $tmp1,11($mac) + dsrl $tmp1,$in1,56 + sb $tmp2,12($mac) + sb $tmp3,13($mac) + sb $tmp0,14($mac) + sb $tmp1,15($mac) + + jr $ra +.end poly1305_emit +.rdata +.asciiz "Poly1305 for MIPS64, CRYPTOGAMS by \@dot-asm" +.align 2 +___ +} +}}} else {{{ +###################################################################### +# 32-bit code path +# + +my ($ctx,$inp,$len,$padbit) = ($a0,$a1,$a2,$a3); +my ($in0,$in1,$in2,$in3,$tmp0,$tmp1,$tmp2,$tmp3) = + ($a4,$a5,$a6,$a7,$at,$t0,$t1,$t2); + +$code.=<<___; +#if (defined(_MIPS_ARCH_MIPS32R3) || defined(_MIPS_ARCH_MIPS32R5) || \\ + defined(_MIPS_ARCH_MIPS32R6)) \\ + && !defined(_MIPS_ARCH_MIPS32R2) +# define _MIPS_ARCH_MIPS32R2 +#endif + +#if defined(_MIPS_ARCH_MIPS32R6) +# define multu(rs,rt) +# define mflo(rd,rs,rt) mulu rd,rs,rt +# define mfhi(rd,rs,rt) muhu rd,rs,rt +#else +# define multu(rs,rt) multu rs,rt +# define mflo(rd,rs,rt) mflo rd +# define mfhi(rd,rs,rt) mfhi rd +#endif + +#ifdef __KERNEL__ +# define poly1305_init poly1305_init_mips +# define poly1305_blocks poly1305_blocks_mips +# define poly1305_emit poly1305_emit_mips +#endif + +#if defined(__MIPSEB__) && !defined(MIPSEB) +# define MIPSEB +#endif + +#ifdef MIPSEB +# define MSB 0 +# define LSB 3 +#else +# define MSB 3 +# define LSB 0 +#endif + +.text +.set noat +.set noreorder + +.align 5 +.globl poly1305_init +.ent poly1305_init +poly1305_init: + .frame $sp,0,$ra + .set reorder + + sw $zero,0($ctx) + sw $zero,4($ctx) + sw $zero,8($ctx) + sw $zero,12($ctx) + sw $zero,16($ctx) + + beqz $inp,.Lno_key + +#if defined(_MIPS_ARCH_MIPS32R6) + andi $tmp0,$inp,3 # $inp % 4 + subu $inp,$inp,$tmp0 # align $inp + sll $tmp0,$tmp0,3 # byte to bit offset + lw $in0,0($inp) + lw $in1,4($inp) + lw $in2,8($inp) + lw $in3,12($inp) + beqz $tmp0,.Laligned_key + + lw $tmp2,16($inp) + subu $tmp1,$zero,$tmp0 +# ifdef MIPSEB + sllv $in0,$in0,$tmp0 + srlv $tmp3,$in1,$tmp1 + sllv $in1,$in1,$tmp0 + or $in0,$in0,$tmp3 + srlv $tmp3,$in2,$tmp1 + sllv $in2,$in2,$tmp0 + or $in1,$in1,$tmp3 + srlv $tmp3,$in3,$tmp1 + sllv $in3,$in3,$tmp0 + or $in2,$in2,$tmp3 + srlv $tmp2,$tmp2,$tmp1 + or $in3,$in3,$tmp2 +# else + srlv $in0,$in0,$tmp0 + sllv $tmp3,$in1,$tmp1 + srlv $in1,$in1,$tmp0 + or $in0,$in0,$tmp3 + sllv $tmp3,$in2,$tmp1 + srlv $in2,$in2,$tmp0 + or $in1,$in1,$tmp3 + sllv $tmp3,$in3,$tmp1 + srlv $in3,$in3,$tmp0 + or $in2,$in2,$tmp3 + sllv $tmp2,$tmp2,$tmp1 + or $in3,$in3,$tmp2 +# endif +.Laligned_key: +#else + lwl $in0,0+MSB($inp) + lwl $in1,4+MSB($inp) + lwl $in2,8+MSB($inp) + lwl $in3,12+MSB($inp) + lwr $in0,0+LSB($inp) + lwr $in1,4+LSB($inp) + lwr $in2,8+LSB($inp) + lwr $in3,12+LSB($inp) +#endif +#ifdef MIPSEB +# if defined(_MIPS_ARCH_MIPS32R2) + wsbh $in0,$in0 # byte swap + wsbh $in1,$in1 + wsbh $in2,$in2 + wsbh $in3,$in3 + rotr $in0,$in0,16 + rotr $in1,$in1,16 + rotr $in2,$in2,16 + rotr $in3,$in3,16 +# else + srl $tmp0,$in0,24 # byte swap + srl $tmp1,$in0,8 + andi $tmp2,$in0,0xFF00 + sll $in0,$in0,24 + andi $tmp1,0xFF00 + sll $tmp2,$tmp2,8 + or $in0,$tmp0 + srl $tmp0,$in1,24 + or $tmp1,$tmp2 + srl $tmp2,$in1,8 + or $in0,$tmp1 + andi $tmp1,$in1,0xFF00 + sll $in1,$in1,24 + andi $tmp2,0xFF00 + sll $tmp1,$tmp1,8 + or $in1,$tmp0 + srl $tmp0,$in2,24 + or $tmp2,$tmp1 + srl $tmp1,$in2,8 + or $in1,$tmp2 + andi $tmp2,$in2,0xFF00 + sll $in2,$in2,24 + andi $tmp1,0xFF00 + sll $tmp2,$tmp2,8 + or $in2,$tmp0 + srl $tmp0,$in3,24 + or $tmp1,$tmp2 + srl $tmp2,$in3,8 + or $in2,$tmp1 + andi $tmp1,$in3,0xFF00 + sll $in3,$in3,24 + andi $tmp2,0xFF00 + sll $tmp1,$tmp1,8 + or $in3,$tmp0 + or $tmp2,$tmp1 + or $in3,$tmp2 +# endif +#endif + lui $tmp0,0x0fff + ori $tmp0,0xffff # 0x0fffffff + and $in0,$in0,$tmp0 + subu $tmp0,3 # 0x0ffffffc + and $in1,$in1,$tmp0 + and $in2,$in2,$tmp0 + and $in3,$in3,$tmp0 + + sw $in0,20($ctx) + sw $in1,24($ctx) + sw $in2,28($ctx) + sw $in3,32($ctx) + + srl $tmp1,$in1,2 + srl $tmp2,$in2,2 + srl $tmp3,$in3,2 + addu $in1,$in1,$tmp1 # s1 = r1 + (r1 >> 2) + addu $in2,$in2,$tmp2 + addu $in3,$in3,$tmp3 + sw $in1,36($ctx) + sw $in2,40($ctx) + sw $in3,44($ctx) +.Lno_key: + li $v0,0 + jr $ra +.end poly1305_init +___ +{ +my $SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0x00fff000" : "0x00ff0000"; + +my ($h0,$h1,$h2,$h3,$h4, $r0,$r1,$r2,$r3, $rs1,$rs2,$rs3) = + ($s0,$s1,$s2,$s3,$s4, $s5,$s6,$s7,$s8, $s9,$s10,$s11); +my ($d0,$d1,$d2,$d3) = + ($a4,$a5,$a6,$a7); +my $shr = $t2; # used on R6 +my $one = $t2; # used on R2 + +$code.=<<___; +.globl poly1305_blocks +.align 5 +.ent poly1305_blocks +poly1305_blocks: + .frame $sp,16*4,$ra + .mask $SAVED_REGS_MASK,-4 + .set noreorder + subu $sp, $sp,4*12 + sw $s11,4*11($sp) + sw $s10,4*10($sp) + sw $s9, 4*9($sp) + sw $s8, 4*8($sp) + sw $s7, 4*7($sp) + sw $s6, 4*6($sp) + sw $s5, 4*5($sp) + sw $s4, 4*4($sp) +___ +$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi prologue + sw $s3, 4*3($sp) + sw $s2, 4*2($sp) + sw $s1, 4*1($sp) + sw $s0, 4*0($sp) +___ +$code.=<<___; + .set reorder + + srl $len,4 # number of complete blocks + li $one,1 + beqz $len,.Labort + +#if defined(_MIPS_ARCH_MIPS32R6) + andi $shr,$inp,3 + subu $inp,$inp,$shr # align $inp + sll $shr,$shr,3 # byte to bit offset +#endif + + lw $h0,0($ctx) # load hash value + lw $h1,4($ctx) + lw $h2,8($ctx) + lw $h3,12($ctx) + lw $h4,16($ctx) + + lw $r0,20($ctx) # load key + lw $r1,24($ctx) + lw $r2,28($ctx) + lw $r3,32($ctx) + lw $rs1,36($ctx) + lw $rs2,40($ctx) + lw $rs3,44($ctx) + + sll $len,4 + addu $len,$len,$inp # end of buffer + b .Loop + +.align 4 +.Loop: +#if defined(_MIPS_ARCH_MIPS32R6) + lw $d0,0($inp) # load input + lw $d1,4($inp) + lw $d2,8($inp) + lw $d3,12($inp) + beqz $shr,.Laligned_inp + + lw $t0,16($inp) + subu $t1,$zero,$shr +# ifdef MIPSEB + sllv $d0,$d0,$shr + srlv $at,$d1,$t1 + sllv $d1,$d1,$shr + or $d0,$d0,$at + srlv $at,$d2,$t1 + sllv $d2,$d2,$shr + or $d1,$d1,$at + srlv $at,$d3,$t1 + sllv $d3,$d3,$shr + or $d2,$d2,$at + srlv $t0,$t0,$t1 + or $d3,$d3,$t0 +# else + srlv $d0,$d0,$shr + sllv $at,$d1,$t1 + srlv $d1,$d1,$shr + or $d0,$d0,$at + sllv $at,$d2,$t1 + srlv $d2,$d2,$shr + or $d1,$d1,$at + sllv $at,$d3,$t1 + srlv $d3,$d3,$shr + or $d2,$d2,$at + sllv $t0,$t0,$t1 + or $d3,$d3,$t0 +# endif +.Laligned_inp: +#else + lwl $d0,0+MSB($inp) # load input + lwl $d1,4+MSB($inp) + lwl $d2,8+MSB($inp) + lwl $d3,12+MSB($inp) + lwr $d0,0+LSB($inp) + lwr $d1,4+LSB($inp) + lwr $d2,8+LSB($inp) + lwr $d3,12+LSB($inp) +#endif +#ifdef MIPSEB +# if defined(_MIPS_ARCH_MIPS32R2) + wsbh $d0,$d0 # byte swap + wsbh $d1,$d1 + wsbh $d2,$d2 + wsbh $d3,$d3 + rotr $d0,$d0,16 + rotr $d1,$d1,16 + rotr $d2,$d2,16 + rotr $d3,$d3,16 +# else + srl $at,$d0,24 # byte swap + srl $t0,$d0,8 + andi $t1,$d0,0xFF00 + sll $d0,$d0,24 + andi $t0,0xFF00 + sll $t1,$t1,8 + or $d0,$at + srl $at,$d1,24 + or $t0,$t1 + srl $t1,$d1,8 + or $d0,$t0 + andi $t0,$d1,0xFF00 + sll $d1,$d1,24 + andi $t1,0xFF00 + sll $t0,$t0,8 + or $d1,$at + srl $at,$d2,24 + or $t1,$t0 + srl $t0,$d2,8 + or $d1,$t1 + andi $t1,$d2,0xFF00 + sll $d2,$d2,24 + andi $t0,0xFF00 + sll $t1,$t1,8 + or $d2,$at + srl $at,$d3,24 + or $t0,$t1 + srl $t1,$d3,8 + or $d2,$t0 + andi $t0,$d3,0xFF00 + sll $d3,$d3,24 + andi $t1,0xFF00 + sll $t0,$t0,8 + or $d3,$at + or $t1,$t0 + or $d3,$t1 +# endif +#endif + srl $t0,$h4,2 # modulo-scheduled reduction + andi $h4,$h4,3 + sll $at,$t0,2 + + addu $d0,$d0,$h0 # accumulate input + addu $t0,$t0,$at + sltu $h0,$d0,$h0 + addu $d0,$d0,$t0 # ... and residue + sltu $at,$d0,$t0 + + addu $d1,$d1,$h1 + addu $h0,$h0,$at # carry + sltu $h1,$d1,$h1 + addu $d1,$d1,$h0 + sltu $h0,$d1,$h0 + + addu $d2,$d2,$h2 + addu $h1,$h1,$h0 # carry + sltu $h2,$d2,$h2 + addu $d2,$d2,$h1 + sltu $h1,$d2,$h1 + + addu $d3,$d3,$h3 + addu $h2,$h2,$h1 # carry + sltu $h3,$d3,$h3 + addu $d3,$d3,$h2 + +#if defined(_MIPS_ARCH_MIPS32R2) && !defined(_MIPS_ARCH_MIPS32R6) + multu $r0,$d0 # d0*r0 + sltu $h2,$d3,$h2 + maddu $rs3,$d1 # d1*s3 + addu $h3,$h3,$h2 # carry + maddu $rs2,$d2 # d2*s2 + addu $h4,$h4,$padbit + maddu $rs1,$d3 # d3*s1 + addu $h4,$h4,$h3 + mfhi $at + mflo $h0 + + multu $r1,$d0 # d0*r1 + maddu $r0,$d1 # d1*r0 + maddu $rs3,$d2 # d2*s3 + maddu $rs2,$d3 # d3*s2 + maddu $rs1,$h4 # h4*s1 + maddu $at,$one # hi*1 + mfhi $at + mflo $h1 + + multu $r2,$d0 # d0*r2 + maddu $r1,$d1 # d1*r1 + maddu $r0,$d2 # d2*r0 + maddu $rs3,$d3 # d3*s3 + maddu $rs2,$h4 # h4*s2 + maddu $at,$one # hi*1 + mfhi $at + mflo $h2 + + mul $t0,$r0,$h4 # h4*r0 + + multu $r3,$d0 # d0*r3 + maddu $r2,$d1 # d1*r2 + maddu $r1,$d2 # d2*r1 + maddu $r0,$d3 # d3*r0 + maddu $rs3,$h4 # h4*s3 + maddu $at,$one # hi*1 + mfhi $at + mflo $h3 + + addiu $inp,$inp,16 + + addu $h4,$t0,$at +#else + multu ($r0,$d0) # d0*r0 + mflo ($h0,$r0,$d0) + mfhi ($h1,$r0,$d0) + + sltu $h2,$d3,$h2 + addu $h3,$h3,$h2 # carry + + multu ($rs3,$d1) # d1*s3 + mflo ($at,$rs3,$d1) + mfhi ($t0,$rs3,$d1) + + addu $h4,$h4,$padbit + addiu $inp,$inp,16 + addu $h4,$h4,$h3 + + multu ($rs2,$d2) # d2*s2 + mflo ($a3,$rs2,$d2) + mfhi ($t1,$rs2,$d2) + addu $h0,$h0,$at + addu $h1,$h1,$t0 + multu ($rs1,$d3) # d3*s1 + sltu $at,$h0,$at + addu $h1,$h1,$at + + mflo ($at,$rs1,$d3) + mfhi ($t0,$rs1,$d3) + addu $h0,$h0,$a3 + addu $h1,$h1,$t1 + multu ($r1,$d0) # d0*r1 + sltu $a3,$h0,$a3 + addu $h1,$h1,$a3 + + + mflo ($a3,$r1,$d0) + mfhi ($h2,$r1,$d0) + addu $h0,$h0,$at + addu $h1,$h1,$t0 + multu ($r0,$d1) # d1*r0 + sltu $at,$h0,$at + addu $h1,$h1,$at + + mflo ($at,$r0,$d1) + mfhi ($t0,$r0,$d1) + addu $h1,$h1,$a3 + sltu $a3,$h1,$a3 + multu ($rs3,$d2) # d2*s3 + addu $h2,$h2,$a3 + + mflo ($a3,$rs3,$d2) + mfhi ($t1,$rs3,$d2) + addu $h1,$h1,$at + addu $h2,$h2,$t0 + multu ($rs2,$d3) # d3*s2 + sltu $at,$h1,$at + addu $h2,$h2,$at + + mflo ($at,$rs2,$d3) + mfhi ($t0,$rs2,$d3) + addu $h1,$h1,$a3 + addu $h2,$h2,$t1 + multu ($rs1,$h4) # h4*s1 + sltu $a3,$h1,$a3 + addu $h2,$h2,$a3 + + mflo ($a3,$rs1,$h4) + addu $h1,$h1,$at + addu $h2,$h2,$t0 + multu ($r2,$d0) # d0*r2 + sltu $at,$h1,$at + addu $h2,$h2,$at + + + mflo ($at,$r2,$d0) + mfhi ($h3,$r2,$d0) + addu $h1,$h1,$a3 + sltu $a3,$h1,$a3 + multu ($r1,$d1) # d1*r1 + addu $h2,$h2,$a3 + + mflo ($a3,$r1,$d1) + mfhi ($t1,$r1,$d1) + addu $h2,$h2,$at + sltu $at,$h2,$at + multu ($r0,$d2) # d2*r0 + addu $h3,$h3,$at + + mflo ($at,$r0,$d2) + mfhi ($t0,$r0,$d2) + addu $h2,$h2,$a3 + addu $h3,$h3,$t1 + multu ($rs3,$d3) # d3*s3 + sltu $a3,$h2,$a3 + addu $h3,$h3,$a3 + + mflo ($a3,$rs3,$d3) + mfhi ($t1,$rs3,$d3) + addu $h2,$h2,$at + addu $h3,$h3,$t0 + multu ($rs2,$h4) # h4*s2 + sltu $at,$h2,$at + addu $h3,$h3,$at + + mflo ($at,$rs2,$h4) + addu $h2,$h2,$a3 + addu $h3,$h3,$t1 + multu ($r3,$d0) # d0*r3 + sltu $a3,$h2,$a3 + addu $h3,$h3,$a3 + + + mflo ($a3,$r3,$d0) + mfhi ($t1,$r3,$d0) + addu $h2,$h2,$at + sltu $at,$h2,$at + multu ($r2,$d1) # d1*r2 + addu $h3,$h3,$at + + mflo ($at,$r2,$d1) + mfhi ($t0,$r2,$d1) + addu $h3,$h3,$a3 + sltu $a3,$h3,$a3 + multu ($r0,$d3) # d3*r0 + addu $t1,$t1,$a3 + + mflo ($a3,$r0,$d3) + mfhi ($d3,$r0,$d3) + addu $h3,$h3,$at + addu $t1,$t1,$t0 + multu ($r1,$d2) # d2*r1 + sltu $at,$h3,$at + addu $t1,$t1,$at + + mflo ($at,$r1,$d2) + mfhi ($t0,$r1,$d2) + addu $h3,$h3,$a3 + addu $t1,$t1,$d3 + multu ($rs3,$h4) # h4*s3 + sltu $a3,$h3,$a3 + addu $t1,$t1,$a3 + + mflo ($a3,$rs3,$h4) + addu $h3,$h3,$at + addu $t1,$t1,$t0 + multu ($r0,$h4) # h4*r0 + sltu $at,$h3,$at + addu $t1,$t1,$at + + + mflo ($h4,$r0,$h4) + addu $h3,$h3,$a3 + sltu $a3,$h3,$a3 + addu $t1,$t1,$a3 + addu $h4,$h4,$t1 + + li $padbit,1 # if we loop, padbit is 1 +#endif + bne $inp,$len,.Loop + + sw $h0,0($ctx) # store hash value + sw $h1,4($ctx) + sw $h2,8($ctx) + sw $h3,12($ctx) + sw $h4,16($ctx) + + .set noreorder +.Labort: + lw $s11,4*11($sp) + lw $s10,4*10($sp) + lw $s9, 4*9($sp) + lw $s8, 4*8($sp) + lw $s7, 4*7($sp) + lw $s6, 4*6($sp) + lw $s5, 4*5($sp) + lw $s4, 4*4($sp) +___ +$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi prologue + lw $s3, 4*3($sp) + lw $s2, 4*2($sp) + lw $s1, 4*1($sp) + lw $s0, 4*0($sp) +___ +$code.=<<___; + jr $ra + addu $sp,$sp,4*12 +.end poly1305_blocks +___ +} +{ +my ($ctx,$mac,$nonce,$tmp4) = ($a0,$a1,$a2,$a3); + +$code.=<<___; +.align 5 +.globl poly1305_emit +.ent poly1305_emit +poly1305_emit: + .frame $sp,0,$ra + .set reorder + + lw $tmp4,16($ctx) + lw $tmp0,0($ctx) + lw $tmp1,4($ctx) + lw $tmp2,8($ctx) + lw $tmp3,12($ctx) + + li $in0,-4 # final reduction + srl $ctx,$tmp4,2 + and $in0,$in0,$tmp4 + andi $tmp4,$tmp4,3 + addu $ctx,$ctx,$in0 + + addu $tmp0,$tmp0,$ctx + sltu $ctx,$tmp0,$ctx + addiu $in0,$tmp0,5 # compare to modulus + addu $tmp1,$tmp1,$ctx + sltiu $in1,$in0,5 + sltu $ctx,$tmp1,$ctx + addu $in1,$in1,$tmp1 + addu $tmp2,$tmp2,$ctx + sltu $in2,$in1,$tmp1 + sltu $ctx,$tmp2,$ctx + addu $in2,$in2,$tmp2 + addu $tmp3,$tmp3,$ctx + sltu $in3,$in2,$tmp2 + sltu $ctx,$tmp3,$ctx + addu $in3,$in3,$tmp3 + addu $tmp4,$tmp4,$ctx + sltu $ctx,$in3,$tmp3 + addu $ctx,$tmp4 + + srl $ctx,2 # see if it carried/borrowed + subu $ctx,$zero,$ctx + + xor $in0,$tmp0 + xor $in1,$tmp1 + xor $in2,$tmp2 + xor $in3,$tmp3 + and $in0,$ctx + and $in1,$ctx + and $in2,$ctx + and $in3,$ctx + xor $in0,$tmp0 + xor $in1,$tmp1 + xor $in2,$tmp2 + xor $in3,$tmp3 + + lw $tmp0,0($nonce) # load nonce + lw $tmp1,4($nonce) + lw $tmp2,8($nonce) + lw $tmp3,12($nonce) + + addu $in0,$tmp0 # accumulate nonce + sltu $ctx,$in0,$tmp0 + + addu $in1,$tmp1 + sltu $tmp1,$in1,$tmp1 + addu $in1,$ctx + sltu $ctx,$in1,$ctx + addu $ctx,$tmp1 + + addu $in2,$tmp2 + sltu $tmp2,$in2,$tmp2 + addu $in2,$ctx + sltu $ctx,$in2,$ctx + addu $ctx,$tmp2 + + addu $in3,$tmp3 + addu $in3,$ctx + + srl $tmp0,$in0,8 # write mac value + srl $tmp1,$in0,16 + srl $tmp2,$in0,24 + sb $in0, 0($mac) + sb $tmp0,1($mac) + srl $tmp0,$in1,8 + sb $tmp1,2($mac) + srl $tmp1,$in1,16 + sb $tmp2,3($mac) + srl $tmp2,$in1,24 + sb $in1, 4($mac) + sb $tmp0,5($mac) + srl $tmp0,$in2,8 + sb $tmp1,6($mac) + srl $tmp1,$in2,16 + sb $tmp2,7($mac) + srl $tmp2,$in2,24 + sb $in2, 8($mac) + sb $tmp0,9($mac) + srl $tmp0,$in3,8 + sb $tmp1,10($mac) + srl $tmp1,$in3,16 + sb $tmp2,11($mac) + srl $tmp2,$in3,24 + sb $in3, 12($mac) + sb $tmp0,13($mac) + sb $tmp1,14($mac) + sb $tmp2,15($mac) + + jr $ra +.end poly1305_emit +.rdata +.asciiz "Poly1305 for MIPS32, CRYPTOGAMS by \@dot-asm" +.align 2 +___ +} +}}} + +$output=pop and open STDOUT,">$output"; +print $code; +close STDOUT; diff --git a/arch/mips/fw/arc/Makefile b/arch/mips/fw/arc/Makefile index 31dd7305d643..64d685efcc77 100644 --- a/arch/mips/fw/arc/Makefile +++ b/arch/mips/fw/arc/Makefile @@ -3,8 +3,12 @@ # Makefile for the ARC prom monitor library routines under Linux. # +ifdef CONFIG_ARC_CMDLINE_ONLY +lib-y += cmdline.o +else lib-y += cmdline.o env.o file.o identify.o init.o \ - misc.o salone.o time.o tree.o + misc.o +endif lib-$(CONFIG_ARC_MEMORY) += memory.o lib-$(CONFIG_ARC_CONSOLE) += arc_con.o diff --git a/arch/mips/fw/arc/cmdline.c b/arch/mips/fw/arc/cmdline.c index c0122a1dc587..155c5e911723 100644 --- a/arch/mips/fw/arc/cmdline.c +++ b/arch/mips/fw/arc/cmdline.c @@ -17,6 +17,12 @@ #undef DEBUG_CMDLINE +/* + * A 32-bit ARC PROM pass arguments and environment as 32-bit pointer. + * These macro take care of sign extension. + */ +#define prom_argv(index) ((char *) (long)argv[(index)]) + static char *ignored[] = { "ConsoleIn=", "ConsoleOut=", @@ -32,14 +38,14 @@ static char *used_arc[][2] = { { "OSLoadOptions=", "" } }; -static char * __init move_firmware_args(char* cp) +static char __init *move_firmware_args(int argc, LONG *argv, char *cp) { char *s; int actr, i; actr = 1; /* Always ignore argv[0] */ - while (actr < prom_argc) { + while (actr < argc) { for(i = 0; i < ARRAY_SIZE(used_arc); i++) { int len = strlen(used_arc[i][0]); @@ -64,7 +70,7 @@ static char * __init move_firmware_args(char* cp) return cp; } -void __init prom_init_cmdline(void) +void __init prom_init_cmdline(int argc, LONG *argv) { char *cp; int actr, i; @@ -76,9 +82,9 @@ void __init prom_init_cmdline(void) * Move ARC variables to the beginning to make sure they can be * overridden by later arguments. */ - cp = move_firmware_args(cp); + cp = move_firmware_args(argc, argv, cp); - while (actr < prom_argc) { + while (actr < argc) { for (i = 0; i < ARRAY_SIZE(ignored); i++) { int len = strlen(ignored[i]); diff --git a/arch/mips/fw/arc/env.c b/arch/mips/fw/arc/env.c index 1118a26b32ee..02407a7bb38e 100644 --- a/arch/mips/fw/arc/env.c +++ b/arch/mips/fw/arc/env.c @@ -19,9 +19,3 @@ ArcGetEnvironmentVariable(CHAR *name) { return (CHAR *) ARC_CALL1(get_evar, name); } - -LONG __init -ArcSetEnvironmentVariable(PCHAR name, PCHAR value) -{ - return ARC_CALL2(set_evar, name, value); -} diff --git a/arch/mips/fw/arc/file.c b/arch/mips/fw/arc/file.c index 49fd3ff13fe5..b0d8535c80cc 100644 --- a/arch/mips/fw/arc/file.c +++ b/arch/mips/fw/arc/file.c @@ -13,62 +13,13 @@ #include <asm/sgialib.h> LONG -ArcGetDirectoryEntry(ULONG FileID, struct linux_vdirent *Buffer, - ULONG N, ULONG *Count) -{ - return ARC_CALL4(get_vdirent, FileID, Buffer, N, Count); -} - -LONG -ArcOpen(CHAR *Path, enum linux_omode OpenMode, ULONG *FileID) -{ - return ARC_CALL3(open, Path, OpenMode, FileID); -} - -LONG -ArcClose(ULONG FileID) -{ - return ARC_CALL1(close, FileID); -} - -LONG ArcRead(ULONG FileID, VOID *Buffer, ULONG N, ULONG *Count) { return ARC_CALL4(read, FileID, Buffer, N, Count); } LONG -ArcGetReadStatus(ULONG FileID) -{ - return ARC_CALL1(get_rstatus, FileID); -} - -LONG ArcWrite(ULONG FileID, PVOID Buffer, ULONG N, PULONG Count) { return ARC_CALL4(write, FileID, Buffer, N, Count); } - -LONG -ArcSeek(ULONG FileID, struct linux_bigint *Position, enum linux_seekmode SeekMode) -{ - return ARC_CALL3(seek, FileID, Position, SeekMode); -} - -LONG -ArcMount(char *name, enum linux_mountops op) -{ - return ARC_CALL2(mount, name, op); -} - -LONG -ArcGetFileInformation(ULONG FileID, struct linux_finfo *Information) -{ - return ARC_CALL2(get_finfo, FileID, Information); -} - -LONG ArcSetFileInformation(ULONG FileID, ULONG AttributeFlags, - ULONG AttributeMask) -{ - return ARC_CALL3(set_finfo, FileID, AttributeFlags, AttributeMask); -} diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c index f90266c02c9d..5527e0f54079 100644 --- a/arch/mips/fw/arc/identify.c +++ b/arch/mips/fw/arc/identify.c @@ -32,10 +32,6 @@ static struct smatch mach_table[] = { .liname = "SGI Indy", .flags = PROM_FLAG_ARCS, }, { - .arcname = "SGI-IP27", - .liname = "SGI Origin", - .flags = PROM_FLAG_ARCS, - }, { .arcname = "SGI-IP28", .liname = "SGI IP28", .flags = PROM_FLAG_ARCS, @@ -87,6 +83,11 @@ const char *get_system_type(void) return system_type; } +static pcomponent * __init ArcGetChild(pcomponent *Current) +{ + return (pcomponent *) ARC_CALL1(child_component, Current); +} + void __init prom_identify_arch(void) { pcomponent *p; @@ -98,13 +99,7 @@ void __init prom_identify_arch(void) */ p = ArcGetChild(PROM_NULL_COMPONENT); if (p == NULL) { -#ifdef CONFIG_SGI_IP27 - /* IP27 PROM misbehaves, seems to not implement ARC - GetChild(). So we just assume it's an IP27. */ - iname = "SGI-IP27"; -#else iname = "Unknown"; -#endif } else iname = (char *) (long) p->iname; diff --git a/arch/mips/fw/arc/init.c b/arch/mips/fw/arc/init.c index 008555969534..f9d1dea9b2ca 100644 --- a/arch/mips/fw/arc/init.c +++ b/arch/mips/fw/arc/init.c @@ -18,8 +18,11 @@ /* Master romvec interface. */ struct linux_romvec *romvec; -int prom_argc; -LONG *_prom_argv, *_prom_envp; + +#if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32) +/* stack for calling 32bit ARC prom */ +u64 o32_stk[4096]; +#endif void __init prom_init(void) { @@ -27,10 +30,6 @@ void __init prom_init(void) romvec = ROMVECTOR; - prom_argc = fw_arg0; - _prom_argv = (LONG *) fw_arg1; - _prom_envp = (LONG *) fw_arg2; - if (pb->magic != 0x53435241) { printk(KERN_CRIT "Aieee, bad prom vector magic %08lx\n", (unsigned long) pb->magic); @@ -38,7 +37,7 @@ void __init prom_init(void) ; } - prom_init_cmdline(); + prom_init_cmdline(fw_arg0, (LONG *)fw_arg1); prom_identify_arch(); printk(KERN_INFO "PROMLIB: ARC firmware Version %d Revision %d\n", pb->ver, pb->rev); @@ -49,11 +48,4 @@ void __init prom_init(void) ArcRead(0, &c, 1, &cnt); ArcEnterInteractiveMode(); #endif -#ifdef CONFIG_SGI_IP27 - { - extern const struct plat_smp_ops ip27_smp_ops; - - register_smp_ops(&ip27_smp_ops); - } -#endif } diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c index b4328b3b5288..dbbcddc82823 100644 --- a/arch/mips/fw/arc/memory.c +++ b/arch/mips/fw/arc/memory.c @@ -158,6 +158,10 @@ void __init prom_meminit(void) } } +void __weak __init prom_cleanup(void) +{ +} + void __init prom_free_prom_memory(void) { int i; @@ -169,4 +173,9 @@ void __init prom_free_prom_memory(void) free_init_pages("prom memory", prom_mem_base[i], prom_mem_base[i] + prom_mem_size[i]); } + /* + * at this point it isn't safe to call PROM functions + * give platforms a way to do PROM cleanups + */ + prom_cleanup(); } diff --git a/arch/mips/fw/arc/misc.c b/arch/mips/fw/arc/misc.c index 19f710117d97..d5b2d5901324 100644 --- a/arch/mips/fw/arc/misc.c +++ b/arch/mips/fw/arc/misc.c @@ -21,47 +21,6 @@ #include <asm/bootinfo.h> VOID __noreturn -ArcHalt(VOID) -{ - bc_disable(); - local_irq_disable(); - ARC_CALL0(halt); - - unreachable(); -} - -VOID __noreturn -ArcPowerDown(VOID) -{ - bc_disable(); - local_irq_disable(); - ARC_CALL0(pdown); - - unreachable(); -} - -/* XXX is this a soft reset basically? XXX */ -VOID __noreturn -ArcRestart(VOID) -{ - bc_disable(); - local_irq_disable(); - ARC_CALL0(restart); - - unreachable(); -} - -VOID __noreturn -ArcReboot(VOID) -{ - bc_disable(); - local_irq_disable(); - ARC_CALL0(reboot); - - unreachable(); -} - -VOID __noreturn ArcEnterInteractiveMode(VOID) { bc_disable(); @@ -71,24 +30,6 @@ ArcEnterInteractiveMode(VOID) unreachable(); } -LONG -ArcSaveConfiguration(VOID) -{ - return ARC_CALL0(cfg_save); -} - -struct linux_sysid * -ArcGetSystemId(VOID) -{ - return (struct linux_sysid *) ARC_CALL0(get_sysid); -} - -VOID __init -ArcFlushAllCaches(VOID) -{ - ARC_CALL0(cache_flush); -} - DISPLAY_STATUS * __init ArcGetDisplayStatus(ULONG FileID) { return (DISPLAY_STATUS *) ARC_CALL1(GetDisplayStatus, FileID); diff --git a/arch/mips/fw/arc/promlib.c b/arch/mips/fw/arc/promlib.c index be381307fbb0..5e9e840a9314 100644 --- a/arch/mips/fw/arc/promlib.c +++ b/arch/mips/fw/arc/promlib.c @@ -11,6 +11,21 @@ #include <asm/bcache.h> #include <asm/setup.h> +#if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32) +/* + * For 64bit kernels working with a 32bit ARC PROM pointer arguments + * for ARC calls need to reside in CKEG0/1. But as soon as the kernel + * switches to it's first kernel thread stack is set to an address in + * XKPHYS, so anything on stack can't be used anymore. This is solved + * by using a * static declartion variables are put into BSS, which is + * linked to a CKSEG0 address. Since this is only used on UP platforms + * there is not spinlock needed + */ +#define O32_STATIC static +#else +#define O32_STATIC +#endif + /* * IP22 boardcache is not compatible with board caches. Thus we disable it * during romvec action. Since r4xx0.c is always compiled and linked with your @@ -23,8 +38,10 @@ void prom_putchar(char c) { - ULONG cnt; - CHAR it = c; + O32_STATIC ULONG cnt; + O32_STATIC CHAR it; + + it = c; bc_disable(); ArcWrite(1, &it, 1, &cnt); @@ -33,8 +50,8 @@ void prom_putchar(char c) char prom_getchar(void) { - ULONG cnt; - CHAR c; + O32_STATIC ULONG cnt; + O32_STATIC CHAR c; bc_disable(); ArcRead(0, &c, 1, &cnt); diff --git a/arch/mips/fw/arc/salone.c b/arch/mips/fw/arc/salone.c deleted file mode 100644 index 2d99f44d5576..000000000000 --- a/arch/mips/fw/arc/salone.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Routines to load into memory and execute stand-along program images using - * ARCS PROM firmware. - * - * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - */ -#include <linux/init.h> -#include <asm/sgialib.h> - -LONG __init ArcLoad(CHAR *Path, ULONG TopAddr, ULONG *ExecAddr, ULONG *LowAddr) -{ - return ARC_CALL4(load, Path, TopAddr, ExecAddr, LowAddr); -} - -LONG __init ArcInvoke(ULONG ExecAddr, ULONG StackAddr, ULONG Argc, CHAR *Argv[], - CHAR *Envp[]) -{ - return ARC_CALL5(invoke, ExecAddr, StackAddr, Argc, Argv, Envp); -} - -LONG __init ArcExecute(CHAR *Path, LONG Argc, CHAR *Argv[], CHAR *Envp[]) -{ - return ARC_CALL4(exec, Path, Argc, Argv, Envp); -} diff --git a/arch/mips/fw/arc/time.c b/arch/mips/fw/arc/time.c deleted file mode 100644 index 190cdb50b895..000000000000 --- a/arch/mips/fw/arc/time.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Extracting time information from ARCS prom. - * - * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - */ -#include <linux/init.h> - -#include <asm/fw/arc/types.h> -#include <asm/sgialib.h> - -struct linux_tinfo * __init -ArcGetTime(VOID) -{ - return (struct linux_tinfo *) ARC_CALL0(get_tinfo); -} - -ULONG __init -ArcGetRelativeTime(VOID) -{ - return ARC_CALL0(get_rtime); -} diff --git a/arch/mips/fw/arc/tree.c b/arch/mips/fw/arc/tree.c deleted file mode 100644 index 924a37dc2569..000000000000 --- a/arch/mips/fw/arc/tree.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * PROM component device tree code. - * - * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#include <linux/init.h> -#include <asm/fw/arc/types.h> -#include <asm/sgialib.h> - -#undef DEBUG_PROM_TREE - -pcomponent * __init -ArcGetPeer(pcomponent *Current) -{ - if (Current == PROM_NULL_COMPONENT) - return PROM_NULL_COMPONENT; - - return (pcomponent *) ARC_CALL1(next_component, Current); -} - -pcomponent * __init -ArcGetChild(pcomponent *Current) -{ - return (pcomponent *) ARC_CALL1(child_component, Current); -} - -pcomponent * __init -ArcGetParent(pcomponent *Current) -{ - if (Current == PROM_NULL_COMPONENT) - return PROM_NULL_COMPONENT; - - return (pcomponent *) ARC_CALL1(parent_component, Current); -} - -LONG __init -ArcGetConfigurationData(VOID *Buffer, pcomponent *Current) -{ - return ARC_CALL2(component_data, Buffer, Current); -} - -pcomponent * __init -ArcAddChild(pcomponent *Current, pcomponent *Template, VOID *ConfigurationData) -{ - return (pcomponent *) - ARC_CALL3(child_add, Current, Template, ConfigurationData); -} - -LONG __init -ArcDeleteComponent(pcomponent *ComponentToDelete) -{ - return ARC_CALL1(comp_del, ComponentToDelete); -} - -pcomponent * __init -ArcGetComponent(CHAR *Path) -{ - return (pcomponent *)ARC_CALL1(component_by_path, Path); -} - -#ifdef DEBUG_PROM_TREE - -static char *classes[] = { - "system", "processor", "cache", "adapter", "controller", "peripheral", - "memory" -}; - -static char *types[] = { - "arc", "cpu", "fpu", "picache", "pdcache", "sicache", "sdcache", - "sccache", "memdev", "eisa adapter", "tc adapter", "scsi adapter", - "dti adapter", "multi-func adapter", "disk controller", - "tp controller", "cdrom controller", "worm controller", - "serial controller", "net controller", "display controller", - "parallel controller", "pointer controller", "keyboard controller", - "audio controller", "misc controller", "disk peripheral", - "floppy peripheral", "tp peripheral", "modem peripheral", - "monitor peripheral", "printer peripheral", "pointer peripheral", - "keyboard peripheral", "terminal peripheral", "line peripheral", - "net peripheral", "misc peripheral", "anonymous" -}; - -static char *iflags[] = { - "bogus", "read only", "removable", "console in", "console out", - "input", "output" -}; - -static void __init -dump_component(pcomponent *p) -{ - printk("[%p]:class<%s>type<%s>flags<%s>ver<%d>rev<%d>", - p, classes[p->class], types[p->type], - iflags[p->iflags], p->vers, p->rev); - printk("key<%08lx>\n\tamask<%08lx>cdsize<%d>ilen<%d>iname<%s>\n", - p->key, p->amask, (int)p->cdsize, (int)p->ilen, p->iname); -} - -static void __init -traverse(pcomponent *p, int op) -{ - dump_component(p); - if(ArcGetChild(p)) - traverse(ArcGetChild(p), 1); - if(ArcGetPeer(p) && op) - traverse(ArcGetPeer(p), 1); -} - -void __init -prom_testtree(void) -{ - pcomponent *p; - - p = ArcGetChild(PROM_NULL_COMPONENT); - dump_component(p); - p = ArcGetChild(p); - while(p) { - dump_component(p); - p = ArcGetPeer(p); - } -} - -#endif /* DEBUG_PROM_TREE */ diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c index d5b8c4717ded..1de215b283d6 100644 --- a/arch/mips/generic/init.c +++ b/arch/mips/generic/init.c @@ -20,9 +20,9 @@ #include <asm/smp-ops.h> #include <asm/time.h> -static __initdata const void *fdt; -static __initdata const struct mips_machine *mach; -static __initdata const void *mach_match_data; +static __initconst const void *fdt; +static __initconst const struct mips_machine *mach; +static __initconst const void *mach_match_data; void __init prom_init(void) { diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index bb8658cc7f12..e5ac88392d1f 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -20,157 +20,176 @@ #include <asm/compiler.h> #include <asm/cpu-features.h> #include <asm/cmpxchg.h> +#include <asm/llsc.h> +#include <asm/sync.h> #include <asm/war.h> -/* - * Using a branch-likely instruction to check the result of an sc instruction - * works around a bug present in R10000 CPUs prior to revision 3.0 that could - * cause ll-sc sequences to execute non-atomically. - */ -#if R10000_LLSC_WAR -# define __scbeqz "beqzl" -#else -# define __scbeqz "beqz" -#endif - -#define ATOMIC_INIT(i) { (i) } +#define ATOMIC_OPS(pfx, type) \ +static __always_inline type pfx##_read(const pfx##_t *v) \ +{ \ + return READ_ONCE(v->counter); \ +} \ + \ +static __always_inline void pfx##_set(pfx##_t *v, type i) \ +{ \ + WRITE_ONCE(v->counter, i); \ +} \ + \ +static __always_inline type pfx##_cmpxchg(pfx##_t *v, type o, type n) \ +{ \ + return cmpxchg(&v->counter, o, n); \ +} \ + \ +static __always_inline type pfx##_xchg(pfx##_t *v, type n) \ +{ \ + return xchg(&v->counter, n); \ +} -/* - * atomic_read - read atomic variable - * @v: pointer of type atomic_t - * - * Atomically reads the value of @v. - */ -#define atomic_read(v) READ_ONCE((v)->counter) +#define ATOMIC_INIT(i) { (i) } +ATOMIC_OPS(atomic, int) -/* - * atomic_set - set atomic variable - * @v: pointer of type atomic_t - * @i: required value - * - * Atomically sets the value of @v to @i. - */ -#define atomic_set(v, i) WRITE_ONCE((v)->counter, (i)) +#ifdef CONFIG_64BIT +# define ATOMIC64_INIT(i) { (i) } +ATOMIC_OPS(atomic64, s64) +#endif -#define ATOMIC_OP(op, c_op, asm_op) \ -static __inline__ void atomic_##op(int i, atomic_t * v) \ -{ \ - if (kernel_uses_llsc) { \ - int temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: ll %0, %1 # atomic_" #op " \n" \ - " " #asm_op " %0, %2 \n" \ - " sc %0, %1 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " .set pop \n" \ - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - v->counter c_op i; \ - raw_local_irq_restore(flags); \ - } \ +#define ATOMIC_OP(pfx, op, type, c_op, asm_op, ll, sc) \ +static __inline__ void pfx##_##op(type i, pfx##_t * v) \ +{ \ + type temp; \ + \ + if (!kernel_uses_llsc) { \ + unsigned long flags; \ + \ + raw_local_irq_save(flags); \ + v->counter c_op i; \ + raw_local_irq_restore(flags); \ + return; \ + } \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " #ll " %0, %1 # " #pfx "_" #op " \n" \ + " " #asm_op " %0, %2 \n" \ + " " #sc " %0, %1 \n" \ + "\t" __SC_BEQZ "%0, 1b \n" \ + " .set pop \n" \ + : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter) \ + : "Ir" (i) : __LLSC_CLOBBER); \ } -#define ATOMIC_OP_RETURN(op, c_op, asm_op) \ -static __inline__ int atomic_##op##_return_relaxed(int i, atomic_t * v) \ -{ \ - int result; \ - \ - if (kernel_uses_llsc) { \ - int temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: ll %1, %2 # atomic_" #op "_return \n" \ - " " #asm_op " %0, %1, %3 \n" \ - " sc %0, %2 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " " #asm_op " %0, %1, %3 \n" \ - " .set pop \n" \ - : "=&r" (result), "=&r" (temp), \ - "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - result = v->counter; \ - result c_op i; \ - v->counter = result; \ - raw_local_irq_restore(flags); \ - } \ - \ - return result; \ +#define ATOMIC_OP_RETURN(pfx, op, type, c_op, asm_op, ll, sc) \ +static __inline__ type pfx##_##op##_return_relaxed(type i, pfx##_t * v) \ +{ \ + type temp, result; \ + \ + if (!kernel_uses_llsc) { \ + unsigned long flags; \ + \ + raw_local_irq_save(flags); \ + result = v->counter; \ + result c_op i; \ + v->counter = result; \ + raw_local_irq_restore(flags); \ + return result; \ + } \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " #ll " %1, %2 # " #pfx "_" #op "_return\n" \ + " " #asm_op " %0, %1, %3 \n" \ + " " #sc " %0, %2 \n" \ + "\t" __SC_BEQZ "%0, 1b \n" \ + " " #asm_op " %0, %1, %3 \n" \ + " .set pop \n" \ + : "=&r" (result), "=&r" (temp), \ + "+" GCC_OFF_SMALL_ASM() (v->counter) \ + : "Ir" (i) : __LLSC_CLOBBER); \ + \ + return result; \ } -#define ATOMIC_FETCH_OP(op, c_op, asm_op) \ -static __inline__ int atomic_fetch_##op##_relaxed(int i, atomic_t * v) \ -{ \ - int result; \ - \ - if (kernel_uses_llsc) { \ - int temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: ll %1, %2 # atomic_fetch_" #op " \n" \ - " " #asm_op " %0, %1, %3 \n" \ - " sc %0, %2 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " .set pop \n" \ - " move %0, %1 \n" \ - : "=&r" (result), "=&r" (temp), \ - "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - result = v->counter; \ - v->counter c_op i; \ - raw_local_irq_restore(flags); \ - } \ - \ - return result; \ +#define ATOMIC_FETCH_OP(pfx, op, type, c_op, asm_op, ll, sc) \ +static __inline__ type pfx##_fetch_##op##_relaxed(type i, pfx##_t * v) \ +{ \ + int temp, result; \ + \ + if (!kernel_uses_llsc) { \ + unsigned long flags; \ + \ + raw_local_irq_save(flags); \ + result = v->counter; \ + v->counter c_op i; \ + raw_local_irq_restore(flags); \ + return result; \ + } \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " #ll " %1, %2 # " #pfx "_fetch_" #op "\n" \ + " " #asm_op " %0, %1, %3 \n" \ + " " #sc " %0, %2 \n" \ + "\t" __SC_BEQZ "%0, 1b \n" \ + " .set pop \n" \ + " move %0, %1 \n" \ + : "=&r" (result), "=&r" (temp), \ + "+" GCC_OFF_SMALL_ASM() (v->counter) \ + : "Ir" (i) : __LLSC_CLOBBER); \ + \ + return result; \ } -#define ATOMIC_OPS(op, c_op, asm_op) \ - ATOMIC_OP(op, c_op, asm_op) \ - ATOMIC_OP_RETURN(op, c_op, asm_op) \ - ATOMIC_FETCH_OP(op, c_op, asm_op) +#undef ATOMIC_OPS +#define ATOMIC_OPS(pfx, op, type, c_op, asm_op, ll, sc) \ + ATOMIC_OP(pfx, op, type, c_op, asm_op, ll, sc) \ + ATOMIC_OP_RETURN(pfx, op, type, c_op, asm_op, ll, sc) \ + ATOMIC_FETCH_OP(pfx, op, type, c_op, asm_op, ll, sc) -ATOMIC_OPS(add, +=, addu) -ATOMIC_OPS(sub, -=, subu) +ATOMIC_OPS(atomic, add, int, +=, addu, ll, sc) +ATOMIC_OPS(atomic, sub, int, -=, subu, ll, sc) #define atomic_add_return_relaxed atomic_add_return_relaxed #define atomic_sub_return_relaxed atomic_sub_return_relaxed #define atomic_fetch_add_relaxed atomic_fetch_add_relaxed #define atomic_fetch_sub_relaxed atomic_fetch_sub_relaxed +#ifdef CONFIG_64BIT +ATOMIC_OPS(atomic64, add, s64, +=, daddu, lld, scd) +ATOMIC_OPS(atomic64, sub, s64, -=, dsubu, lld, scd) +# define atomic64_add_return_relaxed atomic64_add_return_relaxed +# define atomic64_sub_return_relaxed atomic64_sub_return_relaxed +# define atomic64_fetch_add_relaxed atomic64_fetch_add_relaxed +# define atomic64_fetch_sub_relaxed atomic64_fetch_sub_relaxed +#endif /* CONFIG_64BIT */ + #undef ATOMIC_OPS -#define ATOMIC_OPS(op, c_op, asm_op) \ - ATOMIC_OP(op, c_op, asm_op) \ - ATOMIC_FETCH_OP(op, c_op, asm_op) +#define ATOMIC_OPS(pfx, op, type, c_op, asm_op, ll, sc) \ + ATOMIC_OP(pfx, op, type, c_op, asm_op, ll, sc) \ + ATOMIC_FETCH_OP(pfx, op, type, c_op, asm_op, ll, sc) -ATOMIC_OPS(and, &=, and) -ATOMIC_OPS(or, |=, or) -ATOMIC_OPS(xor, ^=, xor) +ATOMIC_OPS(atomic, and, int, &=, and, ll, sc) +ATOMIC_OPS(atomic, or, int, |=, or, ll, sc) +ATOMIC_OPS(atomic, xor, int, ^=, xor, ll, sc) #define atomic_fetch_and_relaxed atomic_fetch_and_relaxed #define atomic_fetch_or_relaxed atomic_fetch_or_relaxed #define atomic_fetch_xor_relaxed atomic_fetch_xor_relaxed +#ifdef CONFIG_64BIT +ATOMIC_OPS(atomic64, and, s64, &=, and, lld, scd) +ATOMIC_OPS(atomic64, or, s64, |=, or, lld, scd) +ATOMIC_OPS(atomic64, xor, s64, ^=, xor, lld, scd) +# define atomic64_fetch_and_relaxed atomic64_fetch_and_relaxed +# define atomic64_fetch_or_relaxed atomic64_fetch_or_relaxed +# define atomic64_fetch_xor_relaxed atomic64_fetch_xor_relaxed +#endif + #undef ATOMIC_OPS #undef ATOMIC_FETCH_OP #undef ATOMIC_OP_RETURN @@ -184,258 +203,66 @@ ATOMIC_OPS(xor, ^=, xor) * Atomically test @v and subtract @i if @v is greater or equal than @i. * The function returns the old value of @v minus @i. */ -static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) -{ - int result; - - smp_mb__before_llsc(); - - if (kernel_uses_llsc) { - int temp; - - loongson_llsc_mb(); - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_LEVEL" \n" - "1: ll %1, %2 # atomic_sub_if_positive\n" - " .set pop \n" - " subu %0, %1, %3 \n" - " move %1, %0 \n" - " bltz %0, 2f \n" - " .set push \n" - " .set "MIPS_ISA_LEVEL" \n" - " sc %1, %2 \n" - "\t" __scbeqz " %1, 1b \n" - "2: \n" - " .set pop \n" - : "=&r" (result), "=&r" (temp), - "+" GCC_OFF_SMALL_ASM() (v->counter) - : "Ir" (i) : __LLSC_CLOBBER); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - result = v->counter; - result -= i; - if (result >= 0) - v->counter = result; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return result; +#define ATOMIC_SIP_OP(pfx, type, op, ll, sc) \ +static __inline__ int pfx##_sub_if_positive(type i, pfx##_t * v) \ +{ \ + type temp, result; \ + \ + smp_mb__before_atomic(); \ + \ + if (!kernel_uses_llsc) { \ + unsigned long flags; \ + \ + raw_local_irq_save(flags); \ + result = v->counter; \ + result -= i; \ + if (result >= 0) \ + v->counter = result; \ + raw_local_irq_restore(flags); \ + smp_mb__after_atomic(); \ + return result; \ + } \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " #ll " %1, %2 # atomic_sub_if_positive\n" \ + " .set pop \n" \ + " " #op " %0, %1, %3 \n" \ + " move %1, %0 \n" \ + " bltz %0, 2f \n" \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " #sc " %1, %2 \n" \ + " " __SC_BEQZ "%1, 1b \n" \ + "2: " __SYNC(full, loongson3_war) " \n" \ + " .set pop \n" \ + : "=&r" (result), "=&r" (temp), \ + "+" GCC_OFF_SMALL_ASM() (v->counter) \ + : "Ir" (i) \ + : __LLSC_CLOBBER); \ + \ + /* \ + * In the Loongson3 workaround case we already have a \ + * completion barrier at 2: above, which is needed due to the \ + * bltz that can branch to code outside of the LL/SC loop. As \ + * such, we don't need to emit another barrier here. \ + */ \ + if (!__SYNC_loongson3_war) \ + smp_mb__after_atomic(); \ + \ + return result; \ } -#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), (new))) - -/* - * atomic_dec_if_positive - decrement by 1 if old value positive - * @v: pointer of type atomic_t - */ +ATOMIC_SIP_OP(atomic, int, subu, ll, sc) #define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v) #ifdef CONFIG_64BIT - -#define ATOMIC64_INIT(i) { (i) } - -/* - * atomic64_read - read atomic variable - * @v: pointer of type atomic64_t - * - */ -#define atomic64_read(v) READ_ONCE((v)->counter) - -/* - * atomic64_set - set atomic variable - * @v: pointer of type atomic64_t - * @i: required value - */ -#define atomic64_set(v, i) WRITE_ONCE((v)->counter, (i)) - -#define ATOMIC64_OP(op, c_op, asm_op) \ -static __inline__ void atomic64_##op(s64 i, atomic64_t * v) \ -{ \ - if (kernel_uses_llsc) { \ - s64 temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: lld %0, %1 # atomic64_" #op " \n" \ - " " #asm_op " %0, %2 \n" \ - " scd %0, %1 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " .set pop \n" \ - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - v->counter c_op i; \ - raw_local_irq_restore(flags); \ - } \ -} - -#define ATOMIC64_OP_RETURN(op, c_op, asm_op) \ -static __inline__ s64 atomic64_##op##_return_relaxed(s64 i, atomic64_t * v) \ -{ \ - s64 result; \ - \ - if (kernel_uses_llsc) { \ - s64 temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: lld %1, %2 # atomic64_" #op "_return\n" \ - " " #asm_op " %0, %1, %3 \n" \ - " scd %0, %2 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " " #asm_op " %0, %1, %3 \n" \ - " .set pop \n" \ - : "=&r" (result), "=&r" (temp), \ - "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - result = v->counter; \ - result c_op i; \ - v->counter = result; \ - raw_local_irq_restore(flags); \ - } \ - \ - return result; \ -} - -#define ATOMIC64_FETCH_OP(op, c_op, asm_op) \ -static __inline__ s64 atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v) \ -{ \ - s64 result; \ - \ - if (kernel_uses_llsc) { \ - s64 temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: lld %1, %2 # atomic64_fetch_" #op "\n" \ - " " #asm_op " %0, %1, %3 \n" \ - " scd %0, %2 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " move %0, %1 \n" \ - " .set pop \n" \ - : "=&r" (result), "=&r" (temp), \ - "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - result = v->counter; \ - v->counter c_op i; \ - raw_local_irq_restore(flags); \ - } \ - \ - return result; \ -} - -#define ATOMIC64_OPS(op, c_op, asm_op) \ - ATOMIC64_OP(op, c_op, asm_op) \ - ATOMIC64_OP_RETURN(op, c_op, asm_op) \ - ATOMIC64_FETCH_OP(op, c_op, asm_op) - -ATOMIC64_OPS(add, +=, daddu) -ATOMIC64_OPS(sub, -=, dsubu) - -#define atomic64_add_return_relaxed atomic64_add_return_relaxed -#define atomic64_sub_return_relaxed atomic64_sub_return_relaxed -#define atomic64_fetch_add_relaxed atomic64_fetch_add_relaxed -#define atomic64_fetch_sub_relaxed atomic64_fetch_sub_relaxed - -#undef ATOMIC64_OPS -#define ATOMIC64_OPS(op, c_op, asm_op) \ - ATOMIC64_OP(op, c_op, asm_op) \ - ATOMIC64_FETCH_OP(op, c_op, asm_op) - -ATOMIC64_OPS(and, &=, and) -ATOMIC64_OPS(or, |=, or) -ATOMIC64_OPS(xor, ^=, xor) - -#define atomic64_fetch_and_relaxed atomic64_fetch_and_relaxed -#define atomic64_fetch_or_relaxed atomic64_fetch_or_relaxed -#define atomic64_fetch_xor_relaxed atomic64_fetch_xor_relaxed - -#undef ATOMIC64_OPS -#undef ATOMIC64_FETCH_OP -#undef ATOMIC64_OP_RETURN -#undef ATOMIC64_OP - -/* - * atomic64_sub_if_positive - conditionally subtract integer from atomic - * variable - * @i: integer value to subtract - * @v: pointer of type atomic64_t - * - * Atomically test @v and subtract @i if @v is greater or equal than @i. - * The function returns the old value of @v minus @i. - */ -static __inline__ s64 atomic64_sub_if_positive(s64 i, atomic64_t * v) -{ - s64 result; - - smp_mb__before_llsc(); - - if (kernel_uses_llsc) { - s64 temp; - - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_LEVEL" \n" - "1: lld %1, %2 # atomic64_sub_if_positive\n" - " dsubu %0, %1, %3 \n" - " move %1, %0 \n" - " bltz %0, 1f \n" - " scd %1, %2 \n" - "\t" __scbeqz " %1, 1b \n" - "1: \n" - " .set pop \n" - : "=&r" (result), "=&r" (temp), - "+" GCC_OFF_SMALL_ASM() (v->counter) - : "Ir" (i)); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - result = v->counter; - result -= i; - if (result >= 0) - v->counter = result; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return result; -} - -#define atomic64_cmpxchg(v, o, n) \ - ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n))) -#define atomic64_xchg(v, new) (xchg(&((v)->counter), (new))) - -/* - * atomic64_dec_if_positive - decrement by 1 if old value positive - * @v: pointer of type atomic64_t - */ +ATOMIC_SIP_OP(atomic64, s64, dsubu, lld, scd) #define atomic64_dec_if_positive(v) atomic64_sub_if_positive(1, v) +#endif -#endif /* CONFIG_64BIT */ +#undef ATOMIC_SIP_OP #endif /* _ASM_ATOMIC_H */ diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h index 9228f7386220..49ff172a72b9 100644 --- a/arch/mips/include/asm/barrier.h +++ b/arch/mips/include/asm/barrier.h @@ -9,131 +9,26 @@ #define __ASM_BARRIER_H #include <asm/addrspace.h> +#include <asm/sync.h> -/* - * Sync types defined by the MIPS architecture (document MD00087 table 6.5) - * These values are used with the sync instruction to perform memory barriers. - * Types of ordering guarantees available through the SYNC instruction: - * - Completion Barriers - * - Ordering Barriers - * As compared to the completion barrier, the ordering barrier is a - * lighter-weight operation as it does not require the specified instructions - * before the SYNC to be already completed. Instead it only requires that those - * specified instructions which are subsequent to the SYNC in the instruction - * stream are never re-ordered for processing ahead of the specified - * instructions which are before the SYNC in the instruction stream. - * This potentially reduces how many cycles the barrier instruction must stall - * before it completes. - * Implementations that do not use any of the non-zero values of stype to define - * different barriers, such as ordering barriers, must make those stype values - * act the same as stype zero. - */ - -/* - * Completion barriers: - * - Every synchronizable specified memory instruction (loads or stores or both) - * that occurs in the instruction stream before the SYNC instruction must be - * already globally performed before any synchronizable specified memory - * instructions that occur after the SYNC are allowed to be performed, with - * respect to any other processor or coherent I/O module. - * - * - The barrier does not guarantee the order in which instruction fetches are - * performed. - * - * - A stype value of zero will always be defined such that it performs the most - * complete set of synchronization operations that are defined.This means - * stype zero always does a completion barrier that affects both loads and - * stores preceding the SYNC instruction and both loads and stores that are - * subsequent to the SYNC instruction. Non-zero values of stype may be defined - * by the architecture or specific implementations to perform synchronization - * behaviors that are less complete than that of stype zero. If an - * implementation does not use one of these non-zero values to define a - * different synchronization behavior, then that non-zero value of stype must - * act the same as stype zero completion barrier. This allows software written - * for an implementation with a lighter-weight barrier to work on another - * implementation which only implements the stype zero completion barrier. - * - * - A completion barrier is required, potentially in conjunction with SSNOP (in - * Release 1 of the Architecture) or EHB (in Release 2 of the Architecture), - * to guarantee that memory reference results are visible across operating - * mode changes. For example, a completion barrier is required on some - * implementations on entry to and exit from Debug Mode to guarantee that - * memory effects are handled correctly. - */ - -/* - * stype 0 - A completion barrier that affects preceding loads and stores and - * subsequent loads and stores. - * Older instructions which must reach the load/store ordering point before the - * SYNC instruction completes: Loads, Stores - * Younger instructions which must reach the load/store ordering point only - * after the SYNC instruction completes: Loads, Stores - * Older instructions which must be globally performed when the SYNC instruction - * completes: Loads, Stores - */ -#define STYPE_SYNC 0x0 - -/* - * Ordering barriers: - * - Every synchronizable specified memory instruction (loads or stores or both) - * that occurs in the instruction stream before the SYNC instruction must - * reach a stage in the load/store datapath after which no instruction - * re-ordering is possible before any synchronizable specified memory - * instruction which occurs after the SYNC instruction in the instruction - * stream reaches the same stage in the load/store datapath. - * - * - If any memory instruction before the SYNC instruction in program order, - * generates a memory request to the external memory and any memory - * instruction after the SYNC instruction in program order also generates a - * memory request to external memory, the memory request belonging to the - * older instruction must be globally performed before the time the memory - * request belonging to the younger instruction is globally performed. - * - * - The barrier does not guarantee the order in which instruction fetches are - * performed. - */ +static inline void __sync(void) +{ + asm volatile(__SYNC(full, always) ::: "memory"); +} -/* - * stype 0x10 - An ordering barrier that affects preceding loads and stores and - * subsequent loads and stores. - * Older instructions which must reach the load/store ordering point before the - * SYNC instruction completes: Loads, Stores - * Younger instructions which must reach the load/store ordering point only - * after the SYNC instruction completes: Loads, Stores - * Older instructions which must be globally performed when the SYNC instruction - * completes: N/A - */ -#define STYPE_SYNC_MB 0x10 +static inline void rmb(void) +{ + asm volatile(__SYNC(rmb, always) ::: "memory"); +} +#define rmb rmb -/* - * stype 0x14 - A completion barrier specific to global invalidations - * - * When a sync instruction of this type completes any preceding GINVI or GINVT - * operation has been globalized & completed on all coherent CPUs. Anything - * that the GINV* instruction should invalidate will have been invalidated on - * all coherent CPUs when this instruction completes. It is implementation - * specific whether the GINV* instructions themselves will ensure completion, - * or this sync type will. - * - * In systems implementing global invalidates (ie. with Config5.GI == 2 or 3) - * this sync type also requires that previous SYNCI operations have completed. - */ -#define STYPE_GINV 0x14 +static inline void wmb(void) +{ + asm volatile(__SYNC(wmb, always) ::: "memory"); +} +#define wmb wmb -#ifdef CONFIG_CPU_HAS_SYNC -#define __sync() \ - __asm__ __volatile__( \ - ".set push\n\t" \ - ".set noreorder\n\t" \ - ".set mips2\n\t" \ - "sync\n\t" \ - ".set pop" \ - : /* no output */ \ - : /* no input */ \ - : "memory") -#else -#define __sync() do { } while(0) -#endif +#define fast_mb() __sync() #define __fast_iob() \ __asm__ __volatile__( \ @@ -146,17 +41,8 @@ : "m" (*(int *)CKSEG1) \ : "memory") #ifdef CONFIG_CPU_CAVIUM_OCTEON -# define OCTEON_SYNCW_STR ".set push\n.set arch=octeon\nsyncw\nsyncw\n.set pop\n" -# define __syncw() __asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory") - -# define fast_wmb() __syncw() -# define fast_rmb() barrier() -# define fast_mb() __sync() # define fast_iob() do { } while (0) #else /* ! CONFIG_CPU_CAVIUM_OCTEON */ -# define fast_wmb() __sync() -# define fast_rmb() __sync() -# define fast_mb() __sync() # ifdef CONFIG_SGI_IP28 # define fast_iob() \ __asm__ __volatile__( \ @@ -192,23 +78,14 @@ #endif /* !CONFIG_CPU_HAS_WB */ -#define wmb() fast_wmb() -#define rmb() fast_rmb() - #if defined(CONFIG_WEAK_ORDERING) -# ifdef CONFIG_CPU_CAVIUM_OCTEON -# define __smp_mb() __sync() -# define __smp_rmb() barrier() -# define __smp_wmb() __syncw() -# else -# define __smp_mb() __asm__ __volatile__("sync" : : :"memory") -# define __smp_rmb() __asm__ __volatile__("sync" : : :"memory") -# define __smp_wmb() __asm__ __volatile__("sync" : : :"memory") -# endif +# define __smp_mb() __sync() +# define __smp_rmb() rmb() +# define __smp_wmb() wmb() #else -#define __smp_mb() barrier() -#define __smp_rmb() barrier() -#define __smp_wmb() barrier() +# define __smp_mb() barrier() +# define __smp_rmb() barrier() +# define __smp_wmb() barrier() #endif /* @@ -218,13 +95,14 @@ * ordering will be done by smp_llsc_mb() and friends. */ #if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP) -#define __WEAK_LLSC_MB " sync \n" -#define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") -#define __LLSC_CLOBBER +# define __WEAK_LLSC_MB sync +# define smp_llsc_mb() \ + __asm__ __volatile__(__stringify(__WEAK_LLSC_MB) : : :"memory") +# define __LLSC_CLOBBER #else -#define __WEAK_LLSC_MB " \n" -#define smp_llsc_mb() do { } while (0) -#define __LLSC_CLOBBER "memory" +# define __WEAK_LLSC_MB +# define smp_llsc_mb() do { } while (0) +# define __LLSC_CLOBBER "memory" #endif #ifdef CONFIG_CPU_CAVIUM_OCTEON @@ -241,52 +119,22 @@ #define nudge_writes() mb() #endif -#define __smp_mb__before_atomic() __smp_mb__before_llsc() -#define __smp_mb__after_atomic() smp_llsc_mb() - /* - * Some Loongson 3 CPUs have a bug wherein execution of a memory access (load, - * store or prefetch) in between an LL & SC can cause the SC instruction to - * erroneously succeed, breaking atomicity. Whilst it's unusual to write code - * containing such sequences, this bug bites harder than we might otherwise - * expect due to reordering & speculation: - * - * 1) A memory access appearing prior to the LL in program order may actually - * be executed after the LL - this is the reordering case. - * - * In order to avoid this we need to place a memory barrier (ie. a SYNC - * instruction) prior to every LL instruction, in between it and any earlier - * memory access instructions. - * - * This reordering case is fixed by 3A R2 CPUs, ie. 3A2000 models and later. - * - * 2) If a conditional branch exists between an LL & SC with a target outside - * of the LL-SC loop, for example an exit upon value mismatch in cmpxchg() - * or similar, then misprediction of the branch may allow speculative - * execution of memory accesses from outside of the LL-SC loop. - * - * In order to avoid this we need a memory barrier (ie. a SYNC instruction) - * at each affected branch target, for which we also use loongson_llsc_mb() - * defined below. - * - * This case affects all current Loongson 3 CPUs. - * - * The above described cases cause an error in the cache coherence protocol; - * such that the Invalidate of a competing LL-SC goes 'missing' and SC - * erroneously observes its core still has Exclusive state and lets the SC - * proceed. - * - * Therefore the error only occurs on SMP systems. + * In the Loongson3 LL/SC workaround case, all of our LL/SC loops already have + * a completion barrier immediately preceding the LL instruction. Therefore we + * can skip emitting a barrier from __smp_mb__before_atomic(). */ -#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS /* Loongson-3's LLSC workaround */ -#define loongson_llsc_mb() __asm__ __volatile__("sync" : : :"memory") +#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS +# define __smp_mb__before_atomic() #else -#define loongson_llsc_mb() do { } while (0) +# define __smp_mb__before_atomic() __smp_mb__before_llsc() #endif +#define __smp_mb__after_atomic() smp_llsc_mb() + static inline void sync_ginv(void) { - asm volatile("sync\t%0" :: "i"(STYPE_GINV)); + asm volatile(__SYNC(ginv, always)); } #include <asm-generic/barrier.h> diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index 985d6a02f9ea..a74769940fbd 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -13,16 +13,55 @@ #error only <linux/bitops.h> can be included directly #endif +#include <linux/bits.h> #include <linux/compiler.h> #include <linux/types.h> #include <asm/barrier.h> #include <asm/byteorder.h> /* sigh ... */ #include <asm/compiler.h> #include <asm/cpu-features.h> +#include <asm/isa-rev.h> #include <asm/llsc.h> #include <asm/sgidefs.h> #include <asm/war.h> +#define __bit_op(mem, insn, inputs...) do { \ + unsigned long temp; \ + \ + asm volatile( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " __LL "%0, %1 \n" \ + " " insn " \n" \ + " " __SC "%0, %1 \n" \ + " " __SC_BEQZ "%0, 1b \n" \ + " .set pop \n" \ + : "=&r"(temp), "+" GCC_OFF_SMALL_ASM()(mem) \ + : inputs \ + : __LLSC_CLOBBER); \ +} while (0) + +#define __test_bit_op(mem, ll_dst, insn, inputs...) ({ \ + unsigned long orig, temp; \ + \ + asm volatile( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " __LL ll_dst ", %2 \n" \ + " " insn " \n" \ + " " __SC "%1, %2 \n" \ + " " __SC_BEQZ "%1, 1b \n" \ + " .set pop \n" \ + : "=&r"(orig), "=&r"(temp), \ + "+" GCC_OFF_SMALL_ASM()(mem) \ + : inputs \ + : __LLSC_CLOBBER); \ + \ + orig; \ +}) + /* * These are the "slower" versions of the functions and are in bitops.c. * These functions call raw_local_irq_{save,restore}(). @@ -30,8 +69,6 @@ void __mips_set_bit(unsigned long nr, volatile unsigned long *addr); void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr); void __mips_change_bit(unsigned long nr, volatile unsigned long *addr); -int __mips_test_and_set_bit(unsigned long nr, - volatile unsigned long *addr); int __mips_test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr); int __mips_test_and_clear_bit(unsigned long nr, @@ -52,51 +89,20 @@ int __mips_test_and_change_bit(unsigned long nr, */ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - int bit = nr & SZLONG_MASK; - unsigned long temp; + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; - if (kernel_uses_llsc && R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # set_bit \n" - " or %0, %2 \n" - " " __SC "%0, %1 \n" - " beqzl %0, 1b \n" - " .set pop \n" - : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*m) - : "ir" (1UL << bit), GCC_OFF_SMALL_ASM() (*m) - : __LLSC_CLOBBER); -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) - } else if (kernel_uses_llsc && __builtin_constant_p(bit)) { - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " " __LL "%0, %1 # set_bit \n" - " " __INS "%0, %3, %2, 1 \n" - " " __SC "%0, %1 \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (bit), "r" (~0) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); -#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */ - } else if (kernel_uses_llsc) { - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # set_bit \n" - " or %0, %2 \n" - " " __SC "%0, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); - } else + if (!kernel_uses_llsc) { __mips_set_bit(nr, addr); + return; + } + + if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(bit) && (bit >= 16)) { + __bit_op(*m, __INS "%0, %3, %2, 1", "i"(bit), "r"(~0)); + return; + } + + __bit_op(*m, "or\t%0, %2", "ir"(BIT(bit))); } /* @@ -111,51 +117,20 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) */ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - int bit = nr & SZLONG_MASK; - unsigned long temp; + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; - if (kernel_uses_llsc && R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # clear_bit \n" - " and %0, %2 \n" - " " __SC "%0, %1 \n" - " beqzl %0, 1b \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (~(1UL << bit)) - : __LLSC_CLOBBER); -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) - } else if (kernel_uses_llsc && __builtin_constant_p(bit)) { - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " " __LL "%0, %1 # clear_bit \n" - " " __INS "%0, $0, %2, 1 \n" - " " __SC "%0, %1 \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (bit) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); -#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */ - } else if (kernel_uses_llsc) { - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # clear_bit \n" - " and %0, %2 \n" - " " __SC "%0, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (~(1UL << bit)) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); - } else + if (!kernel_uses_llsc) { __mips_clear_bit(nr, addr); + return; + } + + if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(bit)) { + __bit_op(*m, __INS "%0, $0, %2, 1", "i"(bit)); + return; + } + + __bit_op(*m, "and\t%0, %2", "ir"(~BIT(bit))); } /* @@ -183,159 +158,61 @@ static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *ad */ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) { - int bit = nr & SZLONG_MASK; - - if (kernel_uses_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # change_bit \n" - " xor %0, %2 \n" - " " __SC "%0, %1 \n" - " beqzl %0, 1b \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (1UL << bit) - : __LLSC_CLOBBER); - } else if (kernel_uses_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # change_bit \n" - " xor %0, %2 \n" - " " __SC "%0, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); - } else + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; + + if (!kernel_uses_llsc) { __mips_change_bit(nr, addr); + return; + } + + __bit_op(*m, "xor\t%0, %2", "ir"(BIT(bit))); } /* - * test_and_set_bit - Set a bit and return its old value + * test_and_set_bit_lock - Set a bit and return its old value * @nr: Bit to set * @addr: Address to count from * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. + * This operation is atomic and implies acquire ordering semantics + * after the memory operation. */ -static inline int test_and_set_bit(unsigned long nr, +static inline int test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr) { - int bit = nr & SZLONG_MASK; - unsigned long res; + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; + unsigned long res, orig; - smp_mb__before_llsc(); - - if (kernel_uses_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } else if (kernel_uses_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!res)); - - res = temp & (1UL << bit); - } else - res = __mips_test_and_set_bit(nr, addr); + if (!kernel_uses_llsc) { + res = __mips_test_and_set_bit_lock(nr, addr); + } else { + orig = __test_bit_op(*m, "%0", + "or\t%1, %0, %3", + "ir"(BIT(bit))); + res = (orig & BIT(bit)) != 0; + } smp_llsc_mb(); - return res != 0; + return res; } /* - * test_and_set_bit_lock - Set a bit and return its old value + * test_and_set_bit - Set a bit and return its old value * @nr: Bit to set * @addr: Address to count from * - * This operation is atomic and implies acquire ordering semantics - * after the memory operation. + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. */ -static inline int test_and_set_bit_lock(unsigned long nr, +static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) { - int bit = nr & SZLONG_MASK; - unsigned long res; - - if (kernel_uses_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set pop \n" - : "=&r" (temp), "+m" (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } else if (kernel_uses_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!res)); - - res = temp & (1UL << bit); - } else - res = __mips_test_and_set_bit_lock(nr, addr); - - smp_llsc_mb(); - - return res != 0; + smp_mb__before_atomic(); + return test_and_set_bit_lock(nr, addr); } + /* * test_and_clear_bit - Clear a bit and return its old value * @nr: Bit to clear @@ -347,71 +224,30 @@ static inline int test_and_set_bit_lock(unsigned long nr, static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) { - int bit = nr & SZLONG_MASK; - unsigned long res; - - smp_mb__before_llsc(); + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; + unsigned long res, orig; - if (kernel_uses_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; + smp_mb__before_atomic(); - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # test_and_clear_bit \n" - " or %2, %0, %3 \n" - " xor %2, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) - } else if (kernel_uses_llsc && __builtin_constant_p(nr)) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " " __LL "%0, %1 # test_and_clear_bit \n" - " " __EXT "%2, %0, %3, 1 \n" - " " __INS "%0, $0, %3, 1 \n" - " " __SC "%0, %1 \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "ir" (bit) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); -#endif - } else if (kernel_uses_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # test_and_clear_bit \n" - " or %2, %0, %3 \n" - " xor %2, %3 \n" - " " __SC "%2, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!res)); - - res = temp & (1UL << bit); - } else + if (!kernel_uses_llsc) { res = __mips_test_and_clear_bit(nr, addr); + } else if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(nr)) { + res = __test_bit_op(*m, "%1", + __EXT "%0, %1, %3, 1;" + __INS "%1, $0, %3, 1", + "i"(bit)); + } else { + orig = __test_bit_op(*m, "%0", + "or\t%1, %0, %3;" + "xor\t%1, %1, %3", + "ir"(BIT(bit))); + res = (orig & BIT(bit)) != 0; + } smp_llsc_mb(); - return res != 0; + return res; } /* @@ -425,54 +261,29 @@ static inline int test_and_clear_bit(unsigned long nr, static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) { - int bit = nr & SZLONG_MASK; - unsigned long res; + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; + unsigned long res, orig; - smp_mb__before_llsc(); - - if (kernel_uses_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; + smp_mb__before_atomic(); - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # test_and_change_bit \n" - " xor %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } else if (kernel_uses_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # test_and_change_bit \n" - " xor %2, %0, %3 \n" - " " __SC "\t%2, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!res)); - - res = temp & (1UL << bit); - } else + if (!kernel_uses_llsc) { res = __mips_test_and_change_bit(nr, addr); + } else { + orig = __test_bit_op(*m, "%0", + "xor\t%1, %0, %3", + "ir"(BIT(bit))); + res = (orig & BIT(bit)) != 0; + } smp_llsc_mb(); - return res != 0; + return res; } +#undef __bit_op +#undef __test_bit_op + #include <asm-generic/bitops/non-atomic.h> /* diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 34d62229dea5..d41a5057bc69 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -61,7 +61,7 @@ /* * Valid machtype for Loongson family */ -enum loongson_machine_type { +enum loongson2ef_machine_type { MACH_LOONGSON_UNKNOWN, MACH_LEMOTE_FL2E, MACH_LEMOTE_FL2F, @@ -70,7 +70,6 @@ enum loongson_machine_type { MACH_DEXXON_GDIUM2F10, MACH_LEMOTE_NAS, MACH_LEMOTE_LL2F, - MACH_LOONGSON_GENERIC, MACH_LOONGSON_END }; @@ -99,6 +98,7 @@ extern void detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_ad extern void prom_init(void); extern void prom_free_prom_memory(void); +extern void prom_cleanup(void); extern void free_init_pages(const char *what, unsigned long begin, unsigned long end); diff --git a/arch/mips/include/asm/bugs.h b/arch/mips/include/asm/bugs.h index d8ab8b7129b5..d72dc6e1cf3c 100644 --- a/arch/mips/include/asm/bugs.h +++ b/arch/mips/include/asm/bugs.h @@ -26,9 +26,8 @@ extern void check_bugs64(void); static inline void check_bugs_early(void) { -#ifdef CONFIG_64BIT - check_bugs64_early(); -#endif + if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64)) + check_bugs64_early(); } static inline void check_bugs(void) @@ -37,19 +36,18 @@ static inline void check_bugs(void) cpu_data[cpu].udelay_val = loops_per_jiffy; check_bugs32(); -#ifdef CONFIG_64BIT - check_bugs64(); -#endif + + if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64)) + check_bugs64(); } static inline int r4k_daddiu_bug(void) { -#ifdef CONFIG_64BIT + if (!IS_ENABLED(CONFIG_CPU_R4X00_BUGS64)) + return 0; + WARN_ON(daddiu_bug < 0); return daddiu_bug != 0; -#else - return 0; -#endif } #endif /* _ASM_BUGS_H */ diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index f6136871561d..5b0b3a6777ea 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -11,20 +11,11 @@ #include <linux/bug.h> #include <linux/irqflags.h> #include <asm/compiler.h> +#include <asm/llsc.h> +#include <asm/sync.h> #include <asm/war.h> /* - * Using a branch-likely instruction to check the result of an sc instruction - * works around a bug present in R10000 CPUs prior to revision 3.0 that could - * cause ll-sc sequences to execute non-atomically. - */ -#if R10000_LLSC_WAR -# define __scbeqz "beqzl" -#else -# define __scbeqz "beqz" -#endif - -/* * These functions doesn't exist, so if they are called you'll either: * * - Get an error at compile-time due to __compiletime_error, if supported by @@ -46,18 +37,18 @@ extern unsigned long __xchg_called_with_bad_pointer(void) __typeof(*(m)) __ret; \ \ if (kernel_uses_llsc) { \ - loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " .set push \n" \ " .set " MIPS_ISA_ARCH_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ "1: " ld " %0, %2 # __xchg_asm \n" \ " .set pop \n" \ " move $1, %z3 \n" \ " .set " MIPS_ISA_ARCH_LEVEL " \n" \ " " st " $1, %1 \n" \ - "\t" __scbeqz " $1, 1b \n" \ + "\t" __SC_BEQZ "$1, 1b \n" \ " .set pop \n" \ : "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m) \ : GCC_OFF_SMALL_ASM() (*m), "Jr" (val) \ @@ -103,7 +94,13 @@ unsigned long __xchg(volatile void *ptr, unsigned long x, int size) ({ \ __typeof__(*(ptr)) __res; \ \ - smp_mb__before_llsc(); \ + /* \ + * In the Loongson3 workaround case __xchg_asm() already \ + * contains a completion barrier prior to the LL, so we don't \ + * need to emit an extra one here. \ + */ \ + if (!__SYNC_loongson3_war) \ + smp_mb__before_llsc(); \ \ __res = (__typeof__(*(ptr))) \ __xchg((ptr), (unsigned long)(x), sizeof(*(ptr))); \ @@ -118,25 +115,24 @@ unsigned long __xchg(volatile void *ptr, unsigned long x, int size) __typeof(*(m)) __ret; \ \ if (kernel_uses_llsc) { \ - loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " .set push \n" \ " .set "MIPS_ISA_ARCH_LEVEL" \n" \ + " " __SYNC(full, loongson3_war) " \n" \ "1: " ld " %0, %2 # __cmpxchg_asm \n" \ " bne %0, %z3, 2f \n" \ " .set pop \n" \ " move $1, %z4 \n" \ " .set "MIPS_ISA_ARCH_LEVEL" \n" \ " " st " $1, %1 \n" \ - "\t" __scbeqz " $1, 1b \n" \ + "\t" __SC_BEQZ "$1, 1b \n" \ " .set pop \n" \ - "2: \n" \ + "2: " __SYNC(full, loongson3_war) " \n" \ : "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m) \ : GCC_OFF_SMALL_ASM() (*m), "Jr" (old), "Jr" (new) \ : __LLSC_CLOBBER); \ - loongson_llsc_mb(); \ } else { \ unsigned long __flags; \ \ @@ -190,9 +186,23 @@ unsigned long __cmpxchg(volatile void *ptr, unsigned long old, ({ \ __typeof__(*(ptr)) __res; \ \ - smp_mb__before_llsc(); \ + /* \ + * In the Loongson3 workaround case __cmpxchg_asm() already \ + * contains a completion barrier prior to the LL, so we don't \ + * need to emit an extra one here. \ + */ \ + if (!__SYNC_loongson3_war) \ + smp_mb__before_llsc(); \ + \ __res = cmpxchg_local((ptr), (old), (new)); \ - smp_llsc_mb(); \ + \ + /* \ + * In the Loongson3 workaround case __cmpxchg_asm() already \ + * contains a completion barrier after the SC, so we don't \ + * need to emit an extra one here. \ + */ \ + if (!__SYNC_loongson3_war) \ + smp_llsc_mb(); \ \ __res; \ }) @@ -233,11 +243,11 @@ static inline unsigned long __cmpxchg64(volatile void *ptr, */ local_irq_save(flags); - loongson_llsc_mb(); asm volatile( " .set push \n" " .set " MIPS_ISA_ARCH_LEVEL " \n" /* Load 64 bits from ptr */ + " " __SYNC(full, loongson3_war) " \n" "1: lld %L0, %3 # __cmpxchg64 \n" /* * Split the 64 bit value we loaded into the 2 registers that hold the @@ -269,9 +279,9 @@ static inline unsigned long __cmpxchg64(volatile void *ptr, /* Attempt to store new at ptr */ " scd %L1, %2 \n" /* If we failed, loop! */ - "\t" __scbeqz " %L1, 1b \n" + "\t" __SC_BEQZ "%L1, 1b \n" " .set pop \n" - "2: \n" + "2: " __SYNC(full, loongson3_war) " \n" : "=&r"(ret), "=&r"(tmp), "=" GCC_OFF_SMALL_ASM() (*(unsigned long long *)ptr) @@ -279,7 +289,6 @@ static inline unsigned long __cmpxchg64(volatile void *ptr, "r" (old), "r" (new) : "memory"); - loongson_llsc_mb(); local_irq_restore(flags); return ret; @@ -312,6 +321,4 @@ static inline unsigned long __cmpxchg64(volatile void *ptr, # endif /* !CONFIG_SMP */ #endif /* !CONFIG_64BIT */ -#undef __scbeqz - #endif /* __ASM_CMPXCHG_H */ diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h index 63b3468ede4c..6b7396a6a115 100644 --- a/arch/mips/include/asm/cop2.h +++ b/arch/mips/include/asm/cop2.h @@ -33,7 +33,7 @@ extern void nlm_cop2_restore(struct nlm_cop2_state *); #define cop2_present 1 #define cop2_lazy_restore 0 -#elif defined(CONFIG_CPU_LOONGSON3) +#elif defined(CONFIG_CPU_LOONGSON64) #define cop2_present 1 #define cop2_lazy_restore 1 diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h index 7bbb66760a07..c46c59b0f1b4 100644 --- a/arch/mips/include/asm/cpu-type.h +++ b/arch/mips/include/asm/cpu-type.h @@ -15,18 +15,17 @@ static inline int __pure __get_cpu_type(const int cpu_type) { switch (cpu_type) { -#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2E) || \ - defined(CONFIG_SYS_HAS_CPU_LOONGSON2F) - case CPU_LOONGSON2: +#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2EF) + case CPU_LOONGSON2EF: #endif -#ifdef CONFIG_SYS_HAS_CPU_LOONGSON3 - case CPU_LOONGSON3: +#ifdef CONFIG_SYS_HAS_CPU_LOONGSON64 + case CPU_LOONGSON64: #endif #if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \ defined(CONFIG_SYS_HAS_CPU_LOONGSON1C) - case CPU_LOONGSON1: + case CPU_LOONGSON32: #endif #ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1 diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 7fddcb8350c6..ea830783d663 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -91,7 +91,9 @@ #define PRID_IMP_LOONGSON_32 0x4200 /* Loongson-1 */ #define PRID_IMP_R5432 0x5400 #define PRID_IMP_R5500 0x5500 -#define PRID_IMP_LOONGSON_64 0x6300 /* Loongson-2/3 */ +#define PRID_IMP_LOONGSON_64R 0x6100 /* Reduced Loongson-2 */ +#define PRID_IMP_LOONGSON_64C 0x6300 /* Classic Loongson-2 and Loongson-3 */ +#define PRID_IMP_LOONGSON_64G 0xc000 /* Generic Loongson-2 and Loongson-3 */ #define PRID_IMP_UNKNOWN 0xff00 @@ -310,15 +312,15 @@ enum cpu_type_enum { */ CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350, - CPU_BMIPS4380, CPU_BMIPS5000, CPU_XBURST, CPU_LOONGSON1, CPU_M14KC, + CPU_BMIPS4380, CPU_BMIPS5000, CPU_XBURST, CPU_LOONGSON32, CPU_M14KC, CPU_M14KEC, CPU_INTERAPTIV, CPU_P5600, CPU_PROAPTIV, CPU_1074K, CPU_M5150, CPU_I6400, CPU_P6600, CPU_M6250, /* * MIPS64 class processors */ - CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, - CPU_LOONGSON3, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, + CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2EF, + CPU_LOONGSON64, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP, CPU_I6500, CPU_QEMU_GENERIC, diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h index 6842ffafd1e7..1784d4348c36 100644 --- a/arch/mips/include/asm/fixmap.h +++ b/arch/mips/include/asm/fixmap.h @@ -70,7 +70,7 @@ enum fixed_addresses { #include <asm-generic/fixmap.h> #define kmap_get_fixmap_pte(vaddr) \ - pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) + pte_offset_kernel(pmd_offset(pud_offset(p4d_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)), (vaddr)) /* * Called from pgtable_init() diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h index b83b0397462d..110220705e97 100644 --- a/arch/mips/include/asm/futex.h +++ b/arch/mips/include/asm/futex.h @@ -16,6 +16,7 @@ #include <asm/barrier.h> #include <asm/compiler.h> #include <asm/errno.h> +#include <asm/sync.h> #include <asm/war.h> #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ @@ -32,7 +33,7 @@ " .set arch=r4000 \n" \ "2: sc $1, %2 \n" \ " beqzl $1, 1b \n" \ - __WEAK_LLSC_MB \ + __stringify(__WEAK_LLSC_MB) " \n" \ "3: \n" \ " .insn \n" \ " .set pop \n" \ @@ -50,19 +51,19 @@ "i" (-EFAULT) \ : "memory"); \ } else if (cpu_has_llsc) { \ - loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " .set push \n" \ " .set "MIPS_ISA_ARCH_LEVEL" \n" \ + " " __SYNC(full, loongson3_war) " \n" \ "1: "user_ll("%1", "%4")" # __futex_atomic_op\n" \ " .set pop \n" \ " " insn " \n" \ " .set "MIPS_ISA_ARCH_LEVEL" \n" \ "2: "user_sc("$1", "%2")" \n" \ " beqz $1, 1b \n" \ - __WEAK_LLSC_MB \ + __stringify(__WEAK_LLSC_MB) " \n" \ "3: \n" \ " .insn \n" \ " .set pop \n" \ @@ -147,7 +148,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " .set arch=r4000 \n" "2: sc $1, %2 \n" " beqzl $1, 1b \n" - __WEAK_LLSC_MB + __stringify(__WEAK_LLSC_MB) " \n" "3: \n" " .insn \n" " .set pop \n" @@ -164,13 +165,13 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, "i" (-EFAULT) : "memory"); } else if (cpu_has_llsc) { - loongson_llsc_mb(); __asm__ __volatile__( "# futex_atomic_cmpxchg_inatomic \n" " .set push \n" " .set noat \n" " .set push \n" " .set "MIPS_ISA_ARCH_LEVEL" \n" + " " __SYNC(full, loongson3_war) " \n" "1: "user_ll("%1", "%3")" \n" " bne %1, %z4, 3f \n" " .set pop \n" @@ -178,8 +179,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " .set "MIPS_ISA_ARCH_LEVEL" \n" "2: "user_sc("$1", "%2")" \n" " beqz $1, 1b \n" - __WEAK_LLSC_MB - "3: \n" + "3: " __SYNC_ELSE(full, loongson3_war, __WEAK_LLSC_MB) "\n" " .insn \n" " .set pop \n" " .section .fixup,\"ax\" \n" @@ -194,7 +194,6 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, : GCC_OFF_SMALL_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) : "memory"); - loongson_llsc_mb(); } else return -ENOSYS; diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index 0fa27446869a..a4f48b0f5541 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -158,7 +158,7 @@ do { \ } while (0) #elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ - defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_LOONGSON3_ENHANCEMENT) || \ + defined(CONFIG_CPU_LOONGSON2EF) || defined(CONFIG_LOONGSON3_ENHANCEMENT) || \ defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_XLR) /* diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 2b7b56736372..3f6ce74335b4 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -306,7 +306,7 @@ static inline void iounmap(const volatile void __iomem *addr) #undef __IS_KSEG1 } -#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON3) +#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON64) #define war_io_reorder_wmb() wmb() #else #define war_io_reorder_wmb() barrier() diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h index f0b862a83816..c4728bbdf15b 100644 --- a/arch/mips/include/asm/irqflags.h +++ b/arch/mips/include/asm/irqflags.h @@ -41,7 +41,7 @@ static inline unsigned long arch_local_irq_save(void) " .set push \n" " .set reorder \n" " .set noat \n" -#if defined(CONFIG_CPU_LOONGSON3) || defined (CONFIG_CPU_LOONGSON1) +#if defined(CONFIG_CPU_LOONGSON64) || defined(CONFIG_CPU_LOONGSON32) " mfc0 %[flags], $12 \n" " di \n" #else diff --git a/arch/mips/include/asm/llsc.h b/arch/mips/include/asm/llsc.h index c6d17d171147..c49738bc3bda 100644 --- a/arch/mips/include/asm/llsc.h +++ b/arch/mips/include/asm/llsc.h @@ -9,20 +9,31 @@ #ifndef __ASM_LLSC_H #define __ASM_LLSC_H +#include <asm/isa-rev.h> + #if _MIPS_SZLONG == 32 -#define SZLONG_LOG 5 -#define SZLONG_MASK 31UL #define __LL "ll " #define __SC "sc " #define __INS "ins " #define __EXT "ext " #elif _MIPS_SZLONG == 64 -#define SZLONG_LOG 6 -#define SZLONG_MASK 63UL #define __LL "lld " #define __SC "scd " #define __INS "dins " #define __EXT "dext " #endif +/* + * Using a branch-likely instruction to check the result of an sc instruction + * works around a bug present in R10000 CPUs prior to revision 3.0 that could + * cause ll-sc sequences to execute non-atomically. + */ +#if R10000_LLSC_WAR +# define __SC_BEQZ "beqzl " +#elif MIPS_ISA_REV >= 6 +# define __SC_BEQZ "beqzc " +#else +# define __SC_BEQZ "beqz " +#endif + #endif /* __ASM_LLSC_H */ diff --git a/arch/mips/include/asm/mach-ip22/spaces.h b/arch/mips/include/asm/mach-ip22/spaces.h index 7f9fa6f66059..24fe92cb5313 100644 --- a/arch/mips/include/asm/mach-ip22/spaces.h +++ b/arch/mips/include/asm/mach-ip22/spaces.h @@ -10,17 +10,7 @@ #ifndef _ASM_MACH_IP22_SPACES_H #define _ASM_MACH_IP22_SPACES_H - -#ifdef CONFIG_64BIT - -#define PAGE_OFFSET 0xffffffff80000000UL - -#define CAC_BASE 0xffffffff80000000 -#define IO_BASE 0xffffffffa0000000 -#define UNCAC_BASE 0xffffffffa0000000 -#define MAP_BASE 0xc000000000000000 - -#endif /* CONFIG_64BIT */ +#define PHYS_OFFSET _AC(0x08000000, UL) #include <asm/mach-generic/spaces.h> diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h index 1cd6a23a84f2..f463826515df 100644 --- a/arch/mips/include/asm/mach-ip27/mmzone.h +++ b/arch/mips/include/asm/mach-ip27/mmzone.h @@ -6,7 +6,7 @@ #include <asm/sn/arch.h> #include <asm/sn/hub.h> -#define pa_to_nid(addr) NASID_TO_COMPACT_NODEID(NASID_GET(addr)) +#define pa_to_nid(addr) NASID_GET(addr) struct hub_data { kern_vars_t kern_vars; diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h index 965f0793a5f9..be61ddcdacab 100644 --- a/arch/mips/include/asm/mach-ip27/topology.h +++ b/arch/mips/include/asm/mach-ip27/topology.h @@ -7,14 +7,13 @@ #include <asm/mmzone.h> struct cpuinfo_ip27 { - cnodeid_t p_nodeid; /* my node ID in compact-id-space */ nasid_t p_nasid; /* my node ID in numa-as-id-space */ unsigned char p_slice; /* Physical position on node board */ }; extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS]; -#define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid) +#define cpu_to_node(cpu) (cputonasid(cpu)) #define cpumask_of_node(node) ((node) == -1 ? \ cpu_all_mask : \ &hub_data(node)->h_cpus) @@ -23,7 +22,7 @@ extern int pcibus_to_node(struct pci_bus *); #define cpumask_of_pcibus(bus) (cpumask_of_node(pcibus_to_node(bus))) -extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; +extern unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; #define node_distance(from, to) (__node_distances[(from)][(to)]) diff --git a/arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h new file mode 100644 index 000000000000..cfa02f3d25df --- /dev/null +++ b/arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * IP30/Octane cpu-features overrides. + * + * Copyright (C) 2003 Ralf Baechle <ralf@linux-mips.org> + * 2004-2007 Stanislaw Skowronek <skylark@unaligned.org> + * 2009 Johannes Dickgreber <tanzy@gmx.de> + * 2015 Joshua Kinard <kumba@gentoo.org> + * + */ +#ifndef __ASM_MACH_IP30_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_IP30_CPU_FEATURE_OVERRIDES_H + +#include <asm/cpu.h> + +/* + * IP30 only supports R1[024]000 processors, all using the same config + */ +#define cpu_has_tlb 1 +#define cpu_has_tlbinv 0 +#define cpu_has_segments 0 +#define cpu_has_eva 0 +#define cpu_has_htw 0 +#define cpu_has_rixiex 0 +#define cpu_has_maar 0 +#define cpu_has_rw_llb 0 +#define cpu_has_3kex 0 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_6k_cache 0 +#define cpu_has_8k_cache 0 +#define cpu_has_tx39_cache 0 +#define cpu_has_fpu 1 +#define cpu_has_nofpuex 0 +#define cpu_has_32fpr 1 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_64bits 1 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 +#define cpu_has_llsc 1 +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 +#define cpu_has_rixi 0 +#define cpu_has_xpa 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 + +#define cpu_icache_snoops_remote_store 1 + +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 +#define cpu_has_mips32r6 0 +#define cpu_has_mips64r6 0 + +#define cpu_has_dsp 0 +#define cpu_has_dsp2 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 +#define cpu_has_inclusive_pcaches 1 +#define cpu_hwrena_impl_bits 0 +#define cpu_has_perf_cntr_intr_bit 0 +#define cpu_has_vz 0 +#define cpu_has_fre 0 +#define cpu_has_cdmm 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 64 +#define cpu_scache_line_size() 128 + +#endif /* __ASM_MACH_IP30_CPU_FEATURE_OVERRIDES_H */ + diff --git a/arch/mips/include/asm/mach-ip30/irq.h b/arch/mips/include/asm/mach-ip30/irq.h new file mode 100644 index 000000000000..e5c3dd965266 --- /dev/null +++ b/arch/mips/include/asm/mach-ip30/irq.h @@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * HEART IRQ defines + * + * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de> + * 2014-2016 Joshua Kinard <kumba@gentoo.org> + * + */ + +#ifndef __ASM_MACH_IP30_IRQ_H +#define __ASM_MACH_IP30_IRQ_H + +/* + * HEART has 64 hardware interrupts, but use 128 to leave room for a few + * software interrupts as well (such as the CPU timer interrupt. + */ +#define NR_IRQS 128 + +extern void __init ip30_install_ipi(void); + +/* + * HEART has 64 interrupt vectors available to it, subdivided into five + * priority levels. They are numbered 0 to 63. + */ +#define HEART_NUM_IRQS 64 + +/* + * These are the five interrupt priority levels and their corresponding + * CPU IPx interrupt pins. + * + * Level 4 - Error Interrupts. + * Level 3 - HEART timer interrupt. + * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts. + * Level 1 - General device interrupts. + * Level 0 - General device GFX flow control interrupts. + */ +#define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */ +#define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */ +#define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */ +#define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */ +#define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */ + +/* HEART L0 Interrupts (Low Priority) */ +#define HEART_L0_INT_GENERIC 0 +#define HEART_L0_INT_FLOW_CTRL_HWTR_0 1 +#define HEART_L0_INT_FLOW_CTRL_HWTR_1 2 + +/* HEART L2 Interrupts (High Priority) */ +#define HEART_L2_INT_RESCHED_CPU_0 46 +#define HEART_L2_INT_RESCHED_CPU_1 47 +#define HEART_L2_INT_CALL_CPU_0 48 +#define HEART_L2_INT_CALL_CPU_1 49 + +/* HEART L3 Interrupts (Compare/Counter Timer) */ +#define HEART_L3_INT_TIMER 50 + +/* HEART L4 Interrupts (Errors) */ +#define HEART_L4_INT_XWID_ERR_9 51 +#define HEART_L4_INT_XWID_ERR_A 52 +#define HEART_L4_INT_XWID_ERR_B 53 +#define HEART_L4_INT_XWID_ERR_C 54 +#define HEART_L4_INT_XWID_ERR_D 55 +#define HEART_L4_INT_XWID_ERR_E 56 +#define HEART_L4_INT_XWID_ERR_F 57 +#define HEART_L4_INT_XWID_ERR_XBOW 58 +#define HEART_L4_INT_CPU_BUS_ERR_0 59 +#define HEART_L4_INT_CPU_BUS_ERR_1 60 +#define HEART_L4_INT_CPU_BUS_ERR_2 61 +#define HEART_L4_INT_CPU_BUS_ERR_3 62 +#define HEART_L4_INT_HEART_EXCP 63 + +/* + * Power Switch is wired via BaseIO BRIDGE slot #6. + * + * ACFail is wired via BaseIO BRIDGE slot #7. + */ +#define IP30_POWER_IRQ HEART_L2_INT_POWER_BTN + +#include_next <irq.h> + +#define IP30_HEART_L0_IRQ (MIPS_CPU_IRQ_BASE + 2) +#define IP30_HEART_L1_IRQ (MIPS_CPU_IRQ_BASE + 3) +#define IP30_HEART_L2_IRQ (MIPS_CPU_IRQ_BASE + 4) +#define IP30_HEART_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 5) +#define IP30_HEART_ERR_IRQ (MIPS_CPU_IRQ_BASE + 6) + +#endif /* __ASM_MACH_IP30_IRQ_H */ diff --git a/arch/mips/include/asm/mach-ip30/kernel-entry-init.h b/arch/mips/include/asm/mach-ip30/kernel-entry-init.h new file mode 100644 index 000000000000..be0472c977d8 --- /dev/null +++ b/arch/mips/include/asm/mach-ip30/kernel-entry-init.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __ASM_MACH_IP30_KERNEL_ENTRY_H +#define __ASM_MACH_IP30_KERNEL_ENTRY_H + + .macro kernel_entry_setup + .endm + + .macro smp_slave_setup + move gp, a0 + .endm + +#endif /* __ASM_MACH_IP30_KERNEL_ENTRY_H */ diff --git a/arch/mips/include/asm/mach-ip30/mangle-port.h b/arch/mips/include/asm/mach-ip30/mangle-port.h new file mode 100644 index 000000000000..f3e1262a2d5e --- /dev/null +++ b/arch/mips/include/asm/mach-ip30/mangle-port.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2003, 2004 Ralf Baechle + */ +#ifndef __ASM_MACH_IP30_MANGLE_PORT_H +#define __ASM_MACH_IP30_MANGLE_PORT_H + +#define __swizzle_addr_b(port) ((port)^3) +#define __swizzle_addr_w(port) ((port)^2) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +#define ioswabb(a, x) (x) +#define __mem_ioswabb(a, x) (x) +#define ioswabw(a, x) (x) +#define __mem_ioswabw(a, x) cpu_to_le16(x) +#define ioswabl(a, x) (x) +#define __mem_ioswabl(a, x) cpu_to_le32(x) +#define ioswabq(a, x) (x) +#define __mem_ioswabq(a, x) cpu_to_le64(x) + +#endif /* __ASM_MACH_IP30_MANGLE_PORT_H */ diff --git a/arch/mips/include/asm/mach-ip30/spaces.h b/arch/mips/include/asm/mach-ip30/spaces.h new file mode 100644 index 000000000000..c8a302dfbe05 --- /dev/null +++ b/arch/mips/include/asm/mach-ip30/spaces.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2016 Joshua Kinard <kumba@gentoo.org> + * + */ +#ifndef _ASM_MACH_IP30_SPACES_H +#define _ASM_MACH_IP30_SPACES_H + +/* + * Memory in IP30/Octane is offset 512MB in the physical address space. + */ +#define PHYS_OFFSET _AC(0x20000000, UL) + +#ifdef CONFIG_64BIT +#define CAC_BASE _AC(0xA800000000000000, UL) +#endif + +#include <asm/mach-generic/spaces.h> + +#endif /* _ASM_MACH_IP30_SPACES_H */ diff --git a/arch/mips/include/asm/mach-ip30/war.h b/arch/mips/include/asm/mach-ip30/war.h new file mode 100644 index 000000000000..a98ba204f183 --- /dev/null +++ b/arch/mips/include/asm/mach-ip30/war.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_IP30_WAR_H +#define __ASM_MIPS_MACH_IP30_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 + +#ifdef CONFIG_CPU_R10000 +#define R10000_LLSC_WAR 1 +#else +#define R10000_LLSC_WAR 0 +#endif + +#endif /* __ASM_MIPS_MACH_IP30_WAR_H */ diff --git a/arch/mips/include/asm/mach-loongson2ef/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson2ef/cpu-feature-overrides.h new file mode 100644 index 000000000000..b2ee859ca0b7 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson2ef/cpu-feature-overrides.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2009 Wu Zhangjin <wuzhangjin@gmail.com> + * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca> + * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org> + * + * reference: /proc/cpuinfo, + * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy), + * arch/mips/kernel/proc.c(show_cpuinfo), + * loongson2f user manual. + */ + +#ifndef __ASM_MACH_LOONGSON2EF_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_LOONGSON2EF_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_32fpr 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_4kex 1 +#define cpu_has_64bits 1 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_counter 1 +#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) +#define cpu_has_divec 0 +#define cpu_has_ejtag 0 +#define cpu_has_inclusive_pcaches 1 +#define cpu_has_llsc 1 +#define cpu_has_mcheck 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips16 0 +#define cpu_has_mips16e2 0 +#define cpu_has_mips3d 0 +#define cpu_has_mipsmt 0 +#define cpu_has_smartmips 0 +#define cpu_has_tlb 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_vce 0 +#define cpu_has_veic 0 +#define cpu_has_vint 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_watch 1 + +#endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536.h index 9795b3361532..9795b3361532 100644 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536.h +++ b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536.h diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_mfgpt.h b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_mfgpt.h index 52e8bb0fc04d..52e8bb0fc04d 100644 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_mfgpt.h +++ b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_mfgpt.h diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_pci.h b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h index a0d4b752899e..a0d4b752899e 100644 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_pci.h +++ b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_vsm.h index 70d0153cccc3..70d0153cccc3 100644 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_vsm.h +++ b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_vsm.h diff --git a/arch/mips/include/asm/mach-loongson2ef/loongson.h b/arch/mips/include/asm/mach-loongson2ef/loongson.h new file mode 100644 index 000000000000..5008af0a1a19 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson2ef/loongson.h @@ -0,0 +1,326 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin <wuzhangjin@gmail.com> + */ + +#ifndef __ASM_MACH_LOONGSON2EF_LOONGSON_H +#define __ASM_MACH_LOONGSON2EF_LOONGSON_H + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/irq.h> + +/* loongson internal northbridge initialization */ +extern void bonito_irq_init(void); + +/* machine-specific reboot/halt operation */ +extern void mach_prepare_reboot(void); +extern void mach_prepare_shutdown(void); + +/* environment arguments from bootloader */ +extern u32 cpu_clock_freq; +extern u32 memsize, highmemsize; + +/* loongson-specific command line, env and memory initialization */ +extern void __init prom_init_memory(void); +extern void __init prom_init_machtype(void); +extern void __init prom_init_env(void); +#ifdef CONFIG_LOONGSON_UART_BASE +extern unsigned long _loongson_uart_base, loongson_uart_base; +extern void prom_init_loongson_uart_base(void); +#endif + +static inline void prom_init_uart_base(void) +{ +#ifdef CONFIG_LOONGSON_UART_BASE + prom_init_loongson_uart_base(); +#endif +} + +/* irq operation functions */ +extern void bonito_irqdispatch(void); +extern void __init bonito_irq_init(void); +extern void __init mach_init_irq(void); +extern void mach_irq_dispatch(unsigned int pending); +extern int mach_i8259_irq(void); + +/* We need this in some places... */ +#define delay() ({ \ + int x; \ + for (x = 0; x < 100000; x++) \ + __asm__ __volatile__(""); \ +}) + +#define LOONGSON_REG(x) \ + (*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x))) + +#define LOONGSON_IRQ_BASE 32 +#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ + +#include <linux/interrupt.h> +static inline void do_perfcnt_IRQ(void) +{ +#if IS_ENABLED(CONFIG_OPROFILE) + do_IRQ(LOONGSON2_PERFCNT_IRQ); +#endif +} + +#define LOONGSON_FLASH_BASE 0x1c000000 +#define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */ +#define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1) + +#define LOONGSON_LIO0_BASE 0x1e000000 +#define LOONGSON_LIO0_SIZE 0x01C00000 /* 28M */ +#define LOONGSON_LIO0_TOP (LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1) + +#define LOONGSON_BOOT_BASE 0x1fc00000 +#define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */ +#define LOONGSON_BOOT_TOP (LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1) +#define LOONGSON_REG_BASE 0x1fe00000 +#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */ +#define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1) + +#define LOONGSON_LIO1_BASE 0x1ff00000 +#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */ +#define LOONGSON_LIO1_TOP (LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1) + +#define LOONGSON_PCILO0_BASE 0x10000000 +#define LOONGSON_PCILO1_BASE 0x14000000 +#define LOONGSON_PCILO2_BASE 0x18000000 +#define LOONGSON_PCILO_BASE LOONGSON_PCILO0_BASE +#define LOONGSON_PCILO_SIZE 0x0c000000 /* 64M * 3 */ +#define LOONGSON_PCILO_TOP (LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1) + +#define LOONGSON_PCICFG_BASE 0x1fe80000 +#define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */ +#define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1) +#define LOONGSON_PCIIO_BASE 0x1fd00000 + +#define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */ +#define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1) + +/* Loongson Register Bases */ + +#define LOONGSON_PCICONFIGBASE 0x00 +#define LOONGSON_REGBASE 0x100 + +/* PCI Configuration Registers */ + +#define LOONGSON_PCI_REG(x) LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x)) +#define LOONGSON_PCIDID LOONGSON_PCI_REG(0x00) +#define LOONGSON_PCICMD LOONGSON_PCI_REG(0x04) +#define LOONGSON_PCICLASS LOONGSON_PCI_REG(0x08) +#define LOONGSON_PCILTIMER LOONGSON_PCI_REG(0x0c) +#define LOONGSON_PCIBASE0 LOONGSON_PCI_REG(0x10) +#define LOONGSON_PCIBASE1 LOONGSON_PCI_REG(0x14) +#define LOONGSON_PCIBASE2 LOONGSON_PCI_REG(0x18) +#define LOONGSON_PCIBASE3 LOONGSON_PCI_REG(0x1c) +#define LOONGSON_PCIBASE4 LOONGSON_PCI_REG(0x20) +#define LOONGSON_PCIEXPRBASE LOONGSON_PCI_REG(0x30) +#define LOONGSON_PCIINT LOONGSON_PCI_REG(0x3c) + +#define LOONGSON_PCI_ISR4C LOONGSON_PCI_REG(0x4c) + +#define LOONGSON_PCICMD_PERR_CLR 0x80000000 +#define LOONGSON_PCICMD_SERR_CLR 0x40000000 +#define LOONGSON_PCICMD_MABORT_CLR 0x20000000 +#define LOONGSON_PCICMD_MTABORT_CLR 0x10000000 +#define LOONGSON_PCICMD_TABORT_CLR 0x08000000 +#define LOONGSON_PCICMD_MPERR_CLR 0x01000000 +#define LOONGSON_PCICMD_PERRRESPEN 0x00000040 +#define LOONGSON_PCICMD_ASTEPEN 0x00000080 +#define LOONGSON_PCICMD_SERREN 0x00000100 +#define LOONGSON_PCILTIMER_BUSLATENCY 0x0000ff00 +#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT 8 + +/* Loongson h/w Configuration */ + +#define LOONGSON_GENCFG_OFFSET 0x4 +#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET) + +#define LOONGSON_GENCFG_DEBUGMODE 0x00000001 +#define LOONGSON_GENCFG_SNOOPEN 0x00000002 +#define LOONGSON_GENCFG_CPUSELFRESET 0x00000004 + +#define LOONGSON_GENCFG_FORCE_IRQA 0x00000008 +#define LOONGSON_GENCFG_IRQA_ISOUT 0x00000010 +#define LOONGSON_GENCFG_IRQA_FROM_INT1 0x00000020 +#define LOONGSON_GENCFG_BYTESWAP 0x00000040 + +#define LOONGSON_GENCFG_UNCACHED 0x00000080 +#define LOONGSON_GENCFG_PREFETCHEN 0x00000100 +#define LOONGSON_GENCFG_WBEHINDEN 0x00000200 +#define LOONGSON_GENCFG_CACHEALG 0x00000c00 +#define LOONGSON_GENCFG_CACHEALG_SHIFT 10 +#define LOONGSON_GENCFG_PCIQUEUE 0x00001000 +#define LOONGSON_GENCFG_CACHESTOP 0x00002000 +#define LOONGSON_GENCFG_MSTRBYTESWAP 0x00004000 +#define LOONGSON_GENCFG_BUSERREN 0x00008000 +#define LOONGSON_GENCFG_NORETRYTIMEOUT 0x00010000 +#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT 0x00020000 + +/* PCI address map control */ + +#define LOONGSON_PCIMAP LOONGSON_REG(LOONGSON_REGBASE + 0x10) +#define LOONGSON_PCIMEMBASECFG LOONGSON_REG(LOONGSON_REGBASE + 0x14) +#define LOONGSON_PCIMAP_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x18) + +/* GPIO Regs - r/w */ + +#define LOONGSON_GPIODATA LOONGSON_REG(LOONGSON_REGBASE + 0x1c) +#define LOONGSON_GPIOIE LOONGSON_REG(LOONGSON_REGBASE + 0x20) + +/* ICU Configuration Regs - r/w */ + +#define LOONGSON_INTEDGE LOONGSON_REG(LOONGSON_REGBASE + 0x24) +#define LOONGSON_INTSTEER LOONGSON_REG(LOONGSON_REGBASE + 0x28) +#define LOONGSON_INTPOL LOONGSON_REG(LOONGSON_REGBASE + 0x2c) + +/* ICU Enable Regs - IntEn & IntISR are r/o. */ + +#define LOONGSON_INTENSET LOONGSON_REG(LOONGSON_REGBASE + 0x30) +#define LOONGSON_INTENCLR LOONGSON_REG(LOONGSON_REGBASE + 0x34) +#define LOONGSON_INTEN LOONGSON_REG(LOONGSON_REGBASE + 0x38) +#define LOONGSON_INTISR LOONGSON_REG(LOONGSON_REGBASE + 0x3c) + +/* ICU */ +#define LOONGSON_ICU_MBOXES 0x0000000f +#define LOONGSON_ICU_MBOXES_SHIFT 0 +#define LOONGSON_ICU_DMARDY 0x00000010 +#define LOONGSON_ICU_DMAEMPTY 0x00000020 +#define LOONGSON_ICU_COPYRDY 0x00000040 +#define LOONGSON_ICU_COPYEMPTY 0x00000080 +#define LOONGSON_ICU_COPYERR 0x00000100 +#define LOONGSON_ICU_PCIIRQ 0x00000200 +#define LOONGSON_ICU_MASTERERR 0x00000400 +#define LOONGSON_ICU_SYSTEMERR 0x00000800 +#define LOONGSON_ICU_DRAMPERR 0x00001000 +#define LOONGSON_ICU_RETRYERR 0x00002000 +#define LOONGSON_ICU_GPIOS 0x01ff0000 +#define LOONGSON_ICU_GPIOS_SHIFT 16 +#define LOONGSON_ICU_GPINS 0x7e000000 +#define LOONGSON_ICU_GPINS_SHIFT 25 +#define LOONGSON_ICU_MBOX(N) (1<<(LOONGSON_ICU_MBOXES_SHIFT+(N))) +#define LOONGSON_ICU_GPIO(N) (1<<(LOONGSON_ICU_GPIOS_SHIFT+(N))) +#define LOONGSON_ICU_GPIN(N) (1<<(LOONGSON_ICU_GPINS_SHIFT+(N))) + +/* PCI prefetch window base & mask */ + +#define LOONGSON_MEM_WIN_BASE_L LOONGSON_REG(LOONGSON_REGBASE + 0x40) +#define LOONGSON_MEM_WIN_BASE_H LOONGSON_REG(LOONGSON_REGBASE + 0x44) +#define LOONGSON_MEM_WIN_MASK_L LOONGSON_REG(LOONGSON_REGBASE + 0x48) +#define LOONGSON_MEM_WIN_MASK_H LOONGSON_REG(LOONGSON_REGBASE + 0x4c) + +/* PCI_Hit*_Sel_* */ + +#define LOONGSON_PCI_HIT0_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x50) +#define LOONGSON_PCI_HIT0_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x54) +#define LOONGSON_PCI_HIT1_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x58) +#define LOONGSON_PCI_HIT1_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x5c) +#define LOONGSON_PCI_HIT2_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x60) +#define LOONGSON_PCI_HIT2_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x64) + +/* PXArb Config & Status */ + +#define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68) +#define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c) + +/* Chip Config registor of each physical cpu package, PRid >= Loongson-2F */ +#define LOONGSON_CHIPCFG (void __iomem *)TO_UNCAC(0x1fc00180) + +/* pcimap */ + +#define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f +#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT 0 +#define LOONGSON_PCIMAP_PCIMAP_LO1 0x00000fc0 +#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT 6 +#define LOONGSON_PCIMAP_PCIMAP_LO2 0x0003f000 +#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT 12 +#define LOONGSON_PCIMAP_PCIMAP_2 0x00040000 +#define LOONGSON_PCIMAP_WIN(WIN, ADDR) \ + ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) + +#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ +#include <linux/cpufreq.h> +extern struct cpufreq_frequency_table loongson2_clockmod_table[]; +#endif + +/* + * address windows configuration module + * + * loongson2e do not have this module + */ +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + +/* address window config module base address */ +#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul +#define LOONGSON_ADDRWINCFG_SIZE 0x180 + +extern unsigned long _loongson_addrwincfg_base; +#define LOONGSON_ADDRWINCFG(offset) \ + (*(volatile u64 *)(_loongson_addrwincfg_base + (offset))) + +#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00) +#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08) +#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10) +#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18) + +#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20) +#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28) +#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30) +#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38) + +#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40) +#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48) +#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50) +#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58) + +#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60) +#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68) +#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70) +#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78) + +#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80) +#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88) +#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90) +#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98) + +#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0) +#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8) +#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0) +#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8) + +#define ADDRWIN_WIN0 0 +#define ADDRWIN_WIN1 1 +#define ADDRWIN_WIN2 2 +#define ADDRWIN_WIN3 3 + +#define ADDRWIN_MAP_DST_DDR 0 +#define ADDRWIN_MAP_DST_PCI 1 +#define ADDRWIN_MAP_DST_LIO 1 + +/* + * s: CPU, PCIDMA + * d: DDR, PCI, LIO + * win: 0, 1, 2, 3 + * src: map source + * dst: map destination + * size: ~mask + 1 + */ +#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ + s##_WIN##w##_BASE = (src); \ + s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \ + s##_WIN##w##_MASK = ~(size-1); \ +} while (0) + +#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size) +#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size) +#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size) + +#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */ + +#endif /* __ASM_MACH_LOONGSON2EF_LOONGSON_H */ diff --git a/arch/mips/include/asm/mach-loongson64/machine.h b/arch/mips/include/asm/mach-loongson2ef/machine.h index 8ef7ea94a26d..4097267ef186 100644 --- a/arch/mips/include/asm/mach-loongson64/machine.h +++ b/arch/mips/include/asm/mach-loongson2ef/machine.h @@ -4,8 +4,8 @@ * Author: Wu Zhangjin <wuzhangjin@gmail.com> */ -#ifndef __ASM_MACH_LOONGSON64_MACHINE_H -#define __ASM_MACH_LOONGSON64_MACHINE_H +#ifndef __ASM_MACH_LOONGSON2EF_MACHINE_H +#define __ASM_MACH_LOONGSON2EF_MACHINE_H #ifdef CONFIG_LEMOTE_FULOONG2E @@ -20,10 +20,4 @@ #endif -#ifdef CONFIG_LOONGSON_MACH3X - -#define LOONGSON_MACHTYPE MACH_LOONGSON_GENERIC - -#endif /* CONFIG_LOONGSON_MACH3X */ - -#endif /* __ASM_MACH_LOONGSON64_MACHINE_H */ +#endif /* __ASM_MACH_LOONGSON2EF_MACHINE_H */ diff --git a/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h b/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h new file mode 100644 index 000000000000..00d602629a55 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org) + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_LOONGSON2EF_MC146818RTC_H +#define __ASM_MACH_LOONGSON2EF_MC146818RTC_H + +#include <linux/io.h> + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + return inb_p(RTC_PORT(1)); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + outb_p(data, RTC_PORT(1)); +} + +#define RTC_ALWAYS_BCD 0 + +#ifndef mc146818_decode_year +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970) +#endif + +#endif /* __ASM_MACH_LOONGSON2EF_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-loongson64/mem.h b/arch/mips/include/asm/mach-loongson2ef/mem.h index ce33c174c04d..d1d759b8974e 100644 --- a/arch/mips/include/asm/mach-loongson64/mem.h +++ b/arch/mips/include/asm/mach-loongson2ef/mem.h @@ -4,8 +4,8 @@ * Author: Wu Zhangjin <wuzhangjin@gmail.com> */ -#ifndef __ASM_MACH_LOONGSON64_MEM_H -#define __ASM_MACH_LOONGSON64_MEM_H +#ifndef __ASM_MACH_LOONGSON2EF_MEM_H +#define __ASM_MACH_LOONGSON2EF_MEM_H /* * high memory space @@ -34,4 +34,4 @@ #define LOONGSON_MMIO_MEM_END 0x80000000 #endif -#endif /* __ASM_MACH_LOONGSON64_MEM_H */ +#endif /* __ASM_MACH_LOONGSON2EF_MEM_H */ diff --git a/arch/mips/include/asm/mach-loongson2ef/pci.h b/arch/mips/include/asm/mach-loongson2ef/pci.h new file mode 100644 index 000000000000..5588c5bc5395 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson2ef/pci.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org> + * Copyright (c) 2009 Wu Zhangjin <wuzhangjin@gmail.com> + */ + +#ifndef __ASM_MACH_LOONGSON2EF_PCI_H_ +#define __ASM_MACH_LOONGSON2EF_PCI_H_ + +extern struct pci_ops loongson_pci_ops; + +/* this is an offset from mips_io_port_base */ +#define LOONGSON_PCI_IO_START 0x00004000UL + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + +/* + * we use address window2 to map cpu address space to pci space + * window2: cpu [1G, 2G] -> pci [1G, 2G] + * why not use window 0 & 1? because they are used by cpu when booting. + * window0: cpu [0, 256M] -> ddr [0, 256M] + * window1: cpu [256M, 512M] -> pci [256M, 512M] + */ + +/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */ +#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */ +#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC + +#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST +#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */ + +#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \ + LOONGSON_PCI_MEM_START + 1) + +#else /* loongson2f/32bit & loongson2e */ + +/* this pci memory space is mapped by pcimap in pci.c */ +#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE +#define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2) + +/* this is an offset from mips_io_port_base */ +#define LOONGSON_PCI_IO_START 0x00004000UL + +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ + +#endif /* !__ASM_MACH_LOONGSON2EF_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-loongson2ef/spaces.h b/arch/mips/include/asm/mach-loongson2ef/spaces.h new file mode 100644 index 000000000000..ba4e8e9b618e --- /dev/null +++ b/arch/mips/include/asm/mach-loongson2ef/spaces.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_MACH_LOONGSON2EF_SPACES_H_ +#define __ASM_MACH_LOONGSON2EF_SPACES_H_ + +#if defined(CONFIG_64BIT) +#define CAC_BASE _AC(0x9800000000000000, UL) +#endif /* CONFIG_64BIT */ + +#include <asm/mach-generic/spaces.h> +#endif diff --git a/arch/mips/include/asm/mach-loongson32/prom.h b/arch/mips/include/asm/mach-loongson32/prom.h deleted file mode 100644 index cb789f18d790..000000000000 --- a/arch/mips/include/asm/mach-loongson32/prom.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> - */ - -#ifndef __ASM_MACH_LOONGSON32_PROM_H -#define __ASM_MACH_LOONGSON32_PROM_H - -#include <linux/io.h> -#include <linux/init.h> -#include <linux/irq.h> - -/* environment arguments from bootloader */ -extern unsigned long memsize, highmemsize; - -/* loongson-specific command line, env and memory initialization */ -extern char *prom_getenv(char *name); -extern void __init prom_init_cmdline(void); - -#endif /* __ASM_MACH_LOONGSON32_PROM_H */ diff --git a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h index 4aca25f2ff06..7dc8d75445a9 100644 --- a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h @@ -43,11 +43,8 @@ #define cpu_has_vint 0 #define cpu_has_vtag_icache 0 #define cpu_has_watch 1 - -#ifdef CONFIG_CPU_LOONGSON3 #define cpu_has_wsbh 1 #define cpu_has_ic_fills_f_dc 1 #define cpu_hwrena_impl_bits 0xc0000000 -#endif #endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-loongson64/irq.h b/arch/mips/include/asm/mach-loongson64/irq.h index be9f727a9328..73a89913dc38 100644 --- a/arch/mips/include/asm/mach-loongson64/irq.h +++ b/arch/mips/include/asm/mach-loongson64/irq.h @@ -4,8 +4,6 @@ #include <boot_param.h> -#ifdef CONFIG_CPU_LOONGSON3 - /* cpu core interrupt numbers */ #define MIPS_CPU_IRQ_BASE 56 @@ -35,8 +33,6 @@ #define LOONGSON_INT_COREx_INTy(x, y) (1<<(x) | 1<<(y+4)) /* route to int y of core x */ -#endif - extern void fixup_irqs(void); extern void loongson3_ipi_interrupt(struct pt_regs *regs); diff --git a/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h index b5e288a12dfe..87a5bfbf8cfe 100644 --- a/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h +++ b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h @@ -17,7 +17,6 @@ * Override macros used in arch/mips/kernel/head.S. */ .macro kernel_entry_setup -#ifdef CONFIG_CPU_LOONGSON3 .set push .set mips64 /* Set LPA on LOONGSON3 config3 */ @@ -30,23 +29,29 @@ mtc0 t0, CP0_PAGEGRAIN /* Enable STFill Buffer */ mfc0 t0, CP0_PRID + /* Loongson-3A R4+ */ + andi t1, t0, PRID_IMP_MASK + li t2, PRID_IMP_LOONGSON_64G + beq t1, t2, 1f + nop + /* Loongson-3A R2/R3 */ andi t0, (PRID_IMP_MASK | PRID_REV_MASK) - slti t0, (PRID_IMP_LOONGSON_64 | PRID_REV_LOONGSON3A_R2_0) - bnez t0, 1f + slti t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) + bnez t0, 2f + nop +1: mfc0 t0, CP0_CONFIG6 or t0, 0x100 mtc0 t0, CP0_CONFIG6 -1: +2: _ehb .set pop -#endif .endm /* * Do SMP slave processor setup. */ .macro smp_slave_setup -#ifdef CONFIG_CPU_LOONGSON3 .set push .set mips64 /* Set LPA on LOONGSON3 config3 */ @@ -59,16 +64,23 @@ mtc0 t0, CP0_PAGEGRAIN /* Enable STFill Buffer */ mfc0 t0, CP0_PRID + /* Loongson-3A R4+ */ + andi t1, t0, PRID_IMP_MASK + li t2, PRID_IMP_LOONGSON_64G + beq t1, t2, 1f + nop + /* Loongson-3A R2/R3 */ andi t0, (PRID_IMP_MASK | PRID_REV_MASK) - slti t0, (PRID_IMP_LOONGSON_64 | PRID_REV_LOONGSON3A_R2_0) - bnez t0, 1f + slti t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) + bnez t0, 2f + nop +1: mfc0 t0, CP0_CONFIG6 or t0, 0x100 mtc0 t0, CP0_CONFIG6 -1: +2: _ehb .set pop -#endif .endm #endif /* __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H */ diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h index 694a58574ec0..a8fce112a9b0 100644 --- a/arch/mips/include/asm/mach-loongson64/loongson.h +++ b/arch/mips/include/asm/mach-loongson64/loongson.h @@ -12,8 +12,6 @@ #include <linux/irq.h> #include <boot_param.h> -/* loongson internal northbridge initialization */ -extern void bonito_irq_init(void); /* machine-specific reboot/halt operation */ extern void mach_prepare_reboot(void); @@ -26,25 +24,9 @@ extern const struct plat_smp_ops loongson3_smp_ops; /* loongson-specific command line, env and memory initialization */ extern void __init prom_init_memory(void); -extern void __init prom_init_cmdline(void); -extern void __init prom_init_machtype(void); extern void __init prom_init_env(void); -#ifdef CONFIG_LOONGSON_UART_BASE -extern unsigned long _loongson_uart_base[], loongson_uart_base[]; -extern void prom_init_loongson_uart_base(void); -#endif - -static inline void prom_init_uart_base(void) -{ -#ifdef CONFIG_LOONGSON_UART_BASE - prom_init_loongson_uart_base(); -#endif -} /* irq operation functions */ -extern void bonito_irqdispatch(void); -extern void __init bonito_irq_init(void); -extern void __init mach_init_irq(void); extern void mach_irq_dispatch(unsigned int pending); extern int mach_i8259_irq(void); @@ -64,17 +46,6 @@ extern int mach_i8259_irq(void); #define LOONGSON3_REG32(base, x) \ (*(volatile u32 *)((char *)TO_UNCAC(base) + (x))) -#define LOONGSON_IRQ_BASE 32 -#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ - -#include <linux/interrupt.h> -static inline void do_perfcnt_IRQ(void) -{ -#if IS_ENABLED(CONFIG_OPROFILE) - do_IRQ(LOONGSON2_PERFCNT_IRQ); -#endif -} - #define LOONGSON_FLASH_BASE 0x1c000000 #define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */ #define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1) @@ -109,11 +80,7 @@ static inline void do_perfcnt_IRQ(void) #define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */ #define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1) -#ifdef CONFIG_CPU_LOONGSON3 #define LOONGSON_PCIIO_BASE loongson_sysconf.pci_io_base -#else -#define LOONGSON_PCIIO_BASE 0x1fd00000 -#endif #define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */ #define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1) @@ -270,86 +237,4 @@ extern u64 loongson_freqctrl[MAX_PACKAGES]; #define LOONGSON_PCIMAP_WIN(WIN, ADDR) \ ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) -#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ -#include <linux/cpufreq.h> -extern struct cpufreq_frequency_table loongson2_clockmod_table[]; -#endif - -/* - * address windows configuration module - * - * loongson2e do not have this module - */ -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - -/* address window config module base address */ -#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul -#define LOONGSON_ADDRWINCFG_SIZE 0x180 - -extern unsigned long _loongson_addrwincfg_base; -#define LOONGSON_ADDRWINCFG(offset) \ - (*(volatile u64 *)(_loongson_addrwincfg_base + (offset))) - -#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00) -#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08) -#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10) -#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18) - -#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20) -#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28) -#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30) -#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38) - -#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40) -#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48) -#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50) -#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58) - -#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60) -#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68) -#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70) -#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78) - -#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80) -#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88) -#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90) -#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98) - -#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0) -#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8) -#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0) -#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8) - -#define ADDRWIN_WIN0 0 -#define ADDRWIN_WIN1 1 -#define ADDRWIN_WIN2 2 -#define ADDRWIN_WIN3 3 - -#define ADDRWIN_MAP_DST_DDR 0 -#define ADDRWIN_MAP_DST_PCI 1 -#define ADDRWIN_MAP_DST_LIO 1 - -/* - * s: CPU, PCIDMA - * d: DDR, PCI, LIO - * win: 0, 1, 2, 3 - * src: map source - * dst: map destination - * size: ~mask + 1 - */ -#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ - s##_WIN##w##_BASE = (src); \ - s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \ - s##_WIN##w##_MASK = ~(size-1); \ -} while (0) - -#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \ - LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size) -#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \ - LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size) -#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \ - LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size) - -#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */ - #endif /* __ASM_MACH_LOONGSON64_LOONGSON_H */ diff --git a/arch/mips/include/asm/mach-loongson64/loongson_regs.h b/arch/mips/include/asm/mach-loongson64/loongson_regs.h new file mode 100644 index 000000000000..363a47a5d26e --- /dev/null +++ b/arch/mips/include/asm/mach-loongson64/loongson_regs.h @@ -0,0 +1,227 @@ +/* + * Read/Write Loongson Extension Registers + */ + +#ifndef _LOONGSON_REGS_H_ +#define _LOONGSON_REGS_H_ + +#include <linux/types.h> +#include <linux/bits.h> + +#include <asm/mipsregs.h> +#include <asm/cpu.h> + +static inline bool cpu_has_cfg(void) +{ + return ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G); +} + +static inline u32 read_cpucfg(u32 reg) +{ + u32 __res; + + __asm__ __volatile__( + "parse_r __res,%0\n\t" + "parse_r reg,%1\n\t" + ".insn \n\t" + ".word (0xc8080118 | (reg << 21) | (__res << 11))\n\t" + :"=r"(__res) + :"r"(reg) + : + ); + return __res; +} + +/* Bit Domains for CFG registers */ +#define LOONGSON_CFG0 0x0 +#define LOONGSON_CFG0_PRID GENMASK(31, 0) + +#define LOONGSON_CFG1 0x1 +#define LOONGSON_CFG1_FP BIT(0) +#define LOONGSON_CFG1_FPREV GENMASK(3, 1) +#define LOONGSON_CFG1_MMI BIT(4) +#define LOONGSON_CFG1_MSA1 BIT(5) +#define LOONGSON_CFG1_MSA2 BIT(6) +#define LOONGSON_CFG1_CGP BIT(7) +#define LOONGSON_CFG1_WRP BIT(8) +#define LOONGSON_CFG1_LSX1 BIT(9) +#define LOONGSON_CFG1_LSX2 BIT(10) +#define LOONGSON_CFG1_LASX BIT(11) +#define LOONGSON_CFG1_R6FXP BIT(12) +#define LOONGSON_CFG1_R6CRCP BIT(13) +#define LOONGSON_CFG1_R6FPP BIT(14) +#define LOONGSON_CFG1_CNT64 BIT(15) +#define LOONGSON_CFG1_LSLDR0 BIT(16) +#define LOONGSON_CFG1_LSPREF BIT(17) +#define LOONGSON_CFG1_LSPREFX BIT(18) +#define LOONGSON_CFG1_LSSYNCI BIT(19) +#define LOONGSON_CFG1_LSUCA BIT(20) +#define LOONGSON_CFG1_LLSYNC BIT(21) +#define LOONGSON_CFG1_TGTSYNC BIT(22) +#define LOONGSON_CFG1_LLEXC BIT(23) +#define LOONGSON_CFG1_SCRAND BIT(24) +#define LOONGSON_CFG1_MUALP BIT(25) +#define LOONGSON_CFG1_KMUALEN BIT(26) +#define LOONGSON_CFG1_ITLBT BIT(27) +#define LOONGSON_CFG1_LSUPERF BIT(28) +#define LOONGSON_CFG1_SFBP BIT(29) +#define LOONGSON_CFG1_CDMAP BIT(30) + +#define LOONGSON_CFG2 0x2 +#define LOONGSON_CFG2_LEXT1 BIT(0) +#define LOONGSON_CFG2_LEXT2 BIT(1) +#define LOONGSON_CFG2_LEXT3 BIT(2) +#define LOONGSON_CFG2_LSPW BIT(3) +#define LOONGSON_CFG2_LBT1 BIT(4) +#define LOONGSON_CFG2_LBT2 BIT(5) +#define LOONGSON_CFG2_LBT3 BIT(6) +#define LOONGSON_CFG2_LBTMMU BIT(7) +#define LOONGSON_CFG2_LPMP BIT(8) +#define LOONGSON_CFG2_LPMPREV GENMASK(11, 9) +#define LOONGSON_CFG2_LAMO BIT(12) +#define LOONGSON_CFG2_LPIXU BIT(13) +#define LOONGSON_CFG2_LPIXUN BIT(14) +#define LOONGSON_CFG2_LZVP BIT(15) +#define LOONGSON_CFG2_LZVREV GENMASK(18, 16) +#define LOONGSON_CFG2_LGFTP BIT(19) +#define LOONGSON_CFG2_LGFTPREV GENMASK(22, 20) +#define LOONGSON_CFG2_LLFTP BIT(23) +#define LOONGSON_CFG2_LLFTPREV GENMASK(26, 24) +#define LOONGSON_CFG2_LCSRP BIT(27) +#define LOONGSON_CFG2_LDISBLIKELY BIT(28) + +#define LOONGSON_CFG3 0x3 +#define LOONGSON_CFG3_LCAMP BIT(0) +#define LOONGSON_CFG3_LCAMREV GENMASK(3, 1) +#define LOONGSON_CFG3_LCAMNUM GENMASK(11, 4) +#define LOONGSON_CFG3_LCAMKW GENMASK(19, 12) +#define LOONGSON_CFG3_LCAMVW GENMASK(27, 20) + +#define LOONGSON_CFG4 0x4 +#define LOONGSON_CFG4_CCFREQ GENMASK(31, 0) + +#define LOONGSON_CFG5 0x5 +#define LOONGSON_CFG5_CFM GENMASK(15, 0) +#define LOONGSON_CFG5_CFD GENMASK(31, 16) + +#define LOONGSON_CFG6 0x6 + +#define LOONGSON_CFG7 0x7 +#define LOONGSON_CFG7_GCCAEQRP BIT(0) +#define LOONGSON_CFG7_UCAWINP BIT(1) + +static inline bool cpu_has_csr(void) +{ + if (cpu_has_cfg()) + return (read_cpucfg(LOONGSON_CFG2) & LOONGSON_CFG2_LCSRP); + + return false; +} + +static inline u32 csr_readl(u32 reg) +{ + u32 __res; + + /* RDCSR reg, val */ + __asm__ __volatile__( + "parse_r __res,%0\n\t" + "parse_r reg,%1\n\t" + ".insn \n\t" + ".word (0xc8000118 | (reg << 21) | (__res << 11))\n\t" + :"=r"(__res) + :"r"(reg) + : + ); + return __res; +} + +static inline u64 csr_readq(u32 reg) +{ + u64 __res; + + /* DWRCSR reg, val */ + __asm__ __volatile__( + "parse_r __res,%0\n\t" + "parse_r reg,%1\n\t" + ".insn \n\t" + ".word (0xc8020118 | (reg << 21) | (__res << 11))\n\t" + :"=r"(__res) + :"r"(reg) + : + ); + return __res; +} + +static inline void csr_writel(u32 val, u32 reg) +{ + /* WRCSR reg, val */ + __asm__ __volatile__( + "parse_r reg,%0\n\t" + "parse_r val,%1\n\t" + ".insn \n\t" + ".word (0xc8010118 | (reg << 21) | (val << 11))\n\t" + : + :"r"(reg),"r"(val) + : + ); +} + +static inline void csr_writeq(u64 val, u32 reg) +{ + /* DWRCSR reg, val */ + __asm__ __volatile__( + "parse_r reg,%0\n\t" + "parse_r val,%1\n\t" + ".insn \n\t" + ".word (0xc8030118 | (reg << 21) | (val << 11))\n\t" + : + :"r"(reg),"r"(val) + : + ); +} + +/* Public CSR Register can also be accessed with regular addresses */ +#define CSR_PUBLIC_MMIO_BASE 0x1fe00000 + +#define MMIO_CSR(x) (void *)TO_UNCAC(CSR_PUBLIC_MMIO_BASE + x) + +#define LOONGSON_CSR_FEATURES 0x8 +#define LOONGSON_CSRF_TEMP BIT(0) +#define LOONGSON_CSRF_NODECNT BIT(1) +#define LOONGSON_CSRF_MSI BIT(2) +#define LOONGSON_CSRF_EXTIOI BIT(3) +#define LOONGSON_CSRF_IPI BIT(4) +#define LOONGSON_CSRF_FREQ BIT(5) + +#define LOONGSON_CSR_VENDOR 0x10 /* Vendor name string, should be "Loongson" */ +#define LOONGSON_CSR_CPUNAME 0x20 /* Processor name string */ +#define LOONGSON_CSR_NODECNT 0x408 +#define LOONGSON_CSR_CPUTEMP 0x428 + +/* PerCore CSR, only accessable by local cores */ +#define LOONGSON_CSR_IPI_STATUS 0x1000 +#define LOONGSON_CSR_IPI_EN 0x1004 +#define LOONGSON_CSR_IPI_SET 0x1008 +#define LOONGSON_CSR_IPI_CLEAR 0x100c +#define LOONGSON_CSR_IPI_SEND 0x1040 +#define CSR_IPI_SEND_IP_SHIFT 0 +#define CSR_IPI_SEND_CPU_SHIFT 16 +#define CSR_IPI_SEND_BLOCK BIT(31) + +static inline u64 drdtime(void) +{ + int rID = 0; + u64 val = 0; + + __asm__ __volatile__( + "parse_r rID,%0\n\t" + "parse_r val,%1\n\t" + ".insn \n\t" + ".word (0xc8090118 | (rID << 21) | (val << 11))\n\t" + :"=r"(rID),"=r"(val) + : + ); + return val; +} + +#endif diff --git a/arch/mips/include/asm/mach-loongson64/mmzone.h b/arch/mips/include/asm/mach-loongson64/mmzone.h index 62073d60739f..3a25dbd3b3e9 100644 --- a/arch/mips/include/asm/mach-loongson64/mmzone.h +++ b/arch/mips/include/asm/mach-loongson64/mmzone.h @@ -6,8 +6,8 @@ * Huacai Chen, chenhc@lemote.com * Xiaofu Meng, Shuangshuang Zhang */ -#ifndef _ASM_MACH_MMZONE_H -#define _ASM_MACH_MMZONE_H +#ifndef _ASM_MACH_LOONGSON64_MMZONE_H +#define _ASM_MACH_LOONGSON64_MMZONE_H #include <boot_param.h> #define NODE_ADDRSPACE_SHIFT 44 @@ -19,30 +19,9 @@ #define pa_to_nid(addr) (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT) #define nid_to_addrbase(nid) ((nid) << NODE_ADDRSPACE_SHIFT) -#define LEVELS_PER_SLICE 128 +extern struct pglist_data *__node_data[]; -struct slice_data { - unsigned long irq_enable_mask[2]; - int level_to_irq[LEVELS_PER_SLICE]; -}; - -struct hub_data { - cpumask_t h_cpus; - unsigned long slice_map; - unsigned long irq_alloc_mask[2]; - struct slice_data slice[2]; -}; - -struct node_data { - struct pglist_data pglist; - struct hub_data hub; - cpumask_t cpumask; -}; - -extern struct node_data *__node_data[]; - -#define NODE_DATA(n) (&__node_data[(n)]->pglist) -#define hub_data(n) (&__node_data[(n)]->hub) +#define NODE_DATA(n) (__node_data[n]) extern void setup_zero_pages(void); extern void __init prom_init_numa_memory(void); diff --git a/arch/mips/include/asm/mach-loongson64/pci.h b/arch/mips/include/asm/mach-loongson64/pci.h index 97f807fb2117..8b59d64a23e8 100644 --- a/arch/mips/include/asm/mach-loongson64/pci.h +++ b/arch/mips/include/asm/mach-loongson64/pci.h @@ -12,39 +12,8 @@ extern struct pci_ops loongson_pci_ops; /* this is an offset from mips_io_port_base */ #define LOONGSON_PCI_IO_START 0x00004000UL -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - -/* - * we use address window2 to map cpu address space to pci space - * window2: cpu [1G, 2G] -> pci [1G, 2G] - * why not use window 0 & 1? because they are used by cpu when booting. - * window0: cpu [0, 256M] -> ddr [0, 256M] - * window1: cpu [256M, 512M] -> pci [256M, 512M] - */ - -/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */ -#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */ -#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC - -#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST -#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */ - -#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \ - LOONGSON_PCI_MEM_START + 1) - -#else /* loongson2f/32bit & loongson2e */ - -/* this pci memory space is mapped by pcimap in pci.c */ -#ifdef CONFIG_CPU_LOONGSON3 #define LOONGSON_PCI_MEM_START 0x40000000UL #define LOONGSON_PCI_MEM_END 0x7effffffUL -#else -#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE -#define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2) -#endif -/* this is an offset from mips_io_port_base */ -#define LOONGSON_PCI_IO_START 0x00004000UL -#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ #endif /* !__ASM_MACH_LOONGSON64_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-loongson64/topology.h b/arch/mips/include/asm/mach-loongson64/topology.h index 7ff819ab308a..3414a1fd1783 100644 --- a/arch/mips/include/asm/mach-loongson64/topology.h +++ b/arch/mips/include/asm/mach-loongson64/topology.h @@ -5,7 +5,9 @@ #ifdef CONFIG_NUMA #define cpu_to_node(cpu) (cpu_logical_map(cpu) >> 2) -#define cpumask_of_node(node) (&__node_data[(node)]->cpumask) + +extern cpumask_t __node_cpumask[]; +#define cpumask_of_node(node) (&__node_cpumask[node]) struct pci_bus; extern int pcibus_to_node(struct pci_bus *); diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index bdbdc19a2b8f..0d5a30988697 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -689,6 +689,9 @@ #define MIPS_CONF7_IAR (_ULCAST_(1) << 10) #define MIPS_CONF7_AR (_ULCAST_(1) << 16) +/* Ingenic HPTLB off bits */ +#define XBURST_PAGECTRL_HPTLB_DIS 0xa9000000 + /* Ingenic Config7 bits */ #define MIPS_CONF7_BTB_LOOP_EN (_ULCAST_(1) << 4) @@ -1971,6 +1974,9 @@ do { \ #define read_c0_brcm_sleepcount() __read_32bit_c0_register($22, 7) #define write_c0_brcm_sleepcount(val) __write_32bit_c0_register($22, 7, val) +/* Ingenic page ctrl register */ +#define write_c0_page_ctrl(val) __write_32bit_c0_register($5, 4, val) + /* * Macros to access the guest system control coprocessor */ diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index ed70994fbbec..9846047b3d3d 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -119,12 +119,12 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "RM7000 " #elif defined CONFIG_CPU_SB1 #define MODULE_PROC_FAMILY "SB1 " -#elif defined CONFIG_CPU_LOONGSON1 -#define MODULE_PROC_FAMILY "LOONGSON1 " -#elif defined CONFIG_CPU_LOONGSON2 -#define MODULE_PROC_FAMILY "LOONGSON2 " -#elif defined CONFIG_CPU_LOONGSON3 -#define MODULE_PROC_FAMILY "LOONGSON3 " +#elif defined CONFIG_CPU_LOONGSON32 +#define MODULE_PROC_FAMILY "LOONGSON32 " +#elif defined CONFIG_CPU_LOONGSON2EF +#define MODULE_PROC_FAMILY "LOONGSON2EF " +#elif defined CONFIG_CPU_LOONGSON64 +#define MODULE_PROC_FAMILY "LOONGSON64 " #elif defined CONFIG_CPU_CAVIUM_OCTEON #define MODULE_PROC_FAMILY "OCTEON " #elif defined CONFIG_CPU_XLR diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h index a92cd30b48c9..3bc630ff9ad4 100644 --- a/arch/mips/include/asm/pci/bridge.h +++ b/arch/mips/include/asm/pci/bridge.h @@ -807,6 +807,7 @@ struct bridge_controller { unsigned long intr_addr; struct irq_domain *domain; unsigned int pci_int[8]; + u32 ioc3_sid[8]; nasid_t nasid; }; diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h index 166842337eb2..fa77cb71f303 100644 --- a/arch/mips/include/asm/pgalloc.h +++ b/arch/mips/include/asm/pgalloc.h @@ -96,9 +96,9 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud) free_pages((unsigned long)pud, PUD_ORDER); } -static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud) +static inline void p4d_populate(struct mm_struct *mm, p4d_t *p4d, pud_t *pud) { - set_pgd(pgd, __pgd((unsigned long)pud)); + set_p4d(p4d, __p4d((unsigned long)pud)); } #define __pud_free_tlb(tlb, x, addr) pud_free((tlb)->mm, x) diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h index ba967148b016..1945c8970141 100644 --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -16,7 +16,6 @@ #include <asm/cachectl.h> #include <asm/fixmap.h> -#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #ifdef CONFIG_HIGHMEM @@ -196,14 +195,11 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot) #define pte_page(x) pfn_to_page(pte_pfn(x)) -#define __pgd_offset(address) pgd_index(address) -#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) -#define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) - /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k(address) pgd_offset(&init_mm, address) #define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) #define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) /* to find an entry in a page-table-directory */ diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 93a9dce31f25..f92716cfa4f4 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -17,11 +17,12 @@ #include <asm/cachectl.h> #include <asm/fixmap.h> -#define __ARCH_USE_5LEVEL_HACK -#if defined(CONFIG_PAGE_SIZE_64KB) && !defined(CONFIG_MIPS_VA_BITS_48) +#if CONFIG_PGTABLE_LEVELS == 2 #include <asm-generic/pgtable-nopmd.h> -#elif !(defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_MIPS_VA_BITS_48)) +#elif CONFIG_PGTABLE_LEVELS == 3 #include <asm-generic/pgtable-nopud.h> +#else +#include <asm-generic/pgtable-nop4d.h> #endif /* @@ -186,44 +187,49 @@ extern pud_t invalid_pud_table[PTRS_PER_PUD]; /* * Empty pgd entries point to the invalid_pud_table. */ -static inline int pgd_none(pgd_t pgd) +static inline int p4d_none(p4d_t p4d) { - return pgd_val(pgd) == (unsigned long)invalid_pud_table; + return p4d_val(p4d) == (unsigned long)invalid_pud_table; } -static inline int pgd_bad(pgd_t pgd) +static inline int p4d_bad(p4d_t p4d) { - if (unlikely(pgd_val(pgd) & ~PAGE_MASK)) + if (unlikely(p4d_val(p4d) & ~PAGE_MASK)) return 1; return 0; } -static inline int pgd_present(pgd_t pgd) +static inline int p4d_present(p4d_t p4d) { - return pgd_val(pgd) != (unsigned long)invalid_pud_table; + return p4d_val(p4d) != (unsigned long)invalid_pud_table; } -static inline void pgd_clear(pgd_t *pgdp) +static inline void p4d_clear(p4d_t *p4dp) { - pgd_val(*pgdp) = (unsigned long)invalid_pud_table; + p4d_val(*p4dp) = (unsigned long)invalid_pud_table; } #define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)) -static inline unsigned long pgd_page_vaddr(pgd_t pgd) +static inline unsigned long p4d_page_vaddr(p4d_t p4d) { - return pgd_val(pgd); + return p4d_val(p4d); } -static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address) +#define p4d_phys(p4d) virt_to_phys((void *)p4d_val(p4d)) +#define p4d_page(p4d) (pfn_to_page(p4d_phys(p4d) >> PAGE_SHIFT)) + +#define p4d_index(address) (((address) >> P4D_SHIFT) & (PTRS_PER_P4D - 1)) + +static inline pud_t *pud_offset(p4d_t *p4d, unsigned long address) { - return (pud_t *)pgd_page_vaddr(*pgd) + pud_index(address); + return (pud_t *)p4d_page_vaddr(*p4d) + pud_index(address); } -static inline void set_pgd(pgd_t *pgd, pgd_t pgdval) +static inline void set_p4d(p4d_t *p4d, p4d_t p4dval) { - *pgd = pgdval; + *p4d = p4dval; } #endif @@ -314,10 +320,6 @@ static inline void pud_clear(pud_t *pudp) #define pfn_pmd(pfn, prot) __pmd(((pfn) << _PFN_SHIFT) | pgprot_val(prot)) #endif -#define __pgd_offset(address) pgd_index(address) -#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) -#define __pmd_offset(address) pmd_index(address) - /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k(address) pgd_offset(&init_mm, address) diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index f85bd5b15f51..91b89aab1787 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -644,17 +644,6 @@ static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm, #include <asm-generic/pgtable.h> /* - * uncached accelerated TLB map for video memory access - */ -#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED -#define __HAVE_PHYS_MEM_ACCESS_PROT - -struct file; -pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot); -#endif - -/* * We provide our own get_unmapped area to cope with the virtual aliasing * constraints placed on us by the cache architecture. */ diff --git a/arch/mips/include/asm/pmon.h b/arch/mips/include/asm/pmon.h deleted file mode 100644 index 6ad519189ce2..000000000000 --- a/arch/mips/include/asm/pmon.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 by Ralf Baechle - * - * The cpustart method is a PMC-Sierra's function to start the secondary CPU. - * Stock PMON 2000 has the smpfork, semlock and semunlock methods instead. - */ -#ifndef _ASM_PMON_H -#define _ASM_PMON_H - -struct callvectors { - int (*open) (char*, int, int); - int (*close) (int); - int (*read) (int, void*, int); - int (*write) (int, void*, int); - off_t (*lseek) (int, off_t, int); - int (*printf) (const char*, ...); - void (*cacheflush) (void); - char* (*gets) (char*); - union { - int (*smpfork) (unsigned long cp, char *sp); - int (*cpustart) (long, void (*)(void), void *, long); - } _s; - int (*semlock) (int sem); - void (*semunlock) (int sem); -}; - -extern struct callvectors *debug_vectors; - -#define pmon_open(name, flags, mode) debug_vectors->open(name, flage, mode) -#define pmon_close(fd) debug_vectors->close(fd) -#define pmon_read(fd, buf, count) debug_vectors->read(fd, buf, count) -#define pmon_write(fd, buf, count) debug_vectors->write(fd, buf, count) -#define pmon_lseek(fd, off, whence) debug_vectors->lseek(fd, off, whence) -#define pmon_printf(fmt...) debug_vectors->printf(fmt) -#define pmon_cacheflush() debug_vectors->cacheflush() -#define pmon_gets(s) debug_vectors->gets(s) -#define pmon_cpustart(n, f, sp, gp) debug_vectors->_s.cpustart(n, f, sp, gp) -#define pmon_smpfork(cp, sp) debug_vectors->_s.smpfork(cp, sp) -#define pmon_semlock(sem) debug_vectors->semlock(sem) -#define pmon_semunlock(sem) debug_vectors->semunlock(sem) - -#endif /* _ASM_PMON_H */ diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index fba18d4a9190..7619ad319400 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -385,7 +385,7 @@ unsigned long get_wchan(struct task_struct *p); #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29]) #define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status) -#ifdef CONFIG_CPU_LOONGSON3 +#ifdef CONFIG_CPU_LOONGSON64 /* * Loongson-3's SFB (Store-Fill-Buffer) may buffer writes indefinitely when a * tight read loop is executed, because reads take priority over writes & the diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h index 7f4a32d3345a..15ab16f99f28 100644 --- a/arch/mips/include/asm/r4kcache.h +++ b/arch/mips/include/asm/r4kcache.h @@ -15,12 +15,14 @@ #include <linux/stringify.h> #include <asm/asm.h> +#include <asm/asm-eva.h> #include <asm/cacheops.h> #include <asm/compiler.h> #include <asm/cpu-features.h> #include <asm/cpu-type.h> #include <asm/mipsmtregs.h> #include <asm/mmzone.h> +#include <asm/unroll.h> #include <linux/uaccess.h> /* for uaccess_kernel() */ extern void (*r4k_blast_dcache)(void); @@ -39,16 +41,19 @@ extern void (*r4k_blast_icache)(void); */ #define INDEX_BASE CKSEG0 -#define cache_op(op,addr) \ +#define _cache_op(insn, op, addr) \ __asm__ __volatile__( \ " .set push \n" \ " .set noreorder \n" \ " .set "MIPS_ISA_ARCH_LEVEL" \n" \ - " cache %0, %1 \n" \ + " " insn("%0", "%1") " \n" \ " .set pop \n" \ : \ : "i" (op), "R" (*(unsigned char *)(addr))) +#define cache_op(op, addr) \ + _cache_op(kernel_cache, op, addr) + static inline void flush_icache_line_indexed(unsigned long addr) { cache_op(Index_Invalidate_I, addr); @@ -67,7 +72,7 @@ static inline void flush_scache_line_indexed(unsigned long addr) static inline void flush_icache_line(unsigned long addr) { switch (boot_cpu_type()) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: cache_op(Hit_Invalidate_I_Loongson2, addr); break; @@ -149,7 +154,7 @@ static inline void flush_scache_line(unsigned long addr) static inline int protected_flush_icache_line(unsigned long addr) { switch (boot_cpu_type()) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: return protected_cache_op(Hit_Invalidate_I_Loongson2, addr); default: @@ -193,338 +198,10 @@ static inline void invalidate_tcache_page(unsigned long addr) cache_op(Page_Invalidate_T, addr); } -#ifndef CONFIG_CPU_MIPSR6 -#define cache16_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x010(%0) \n" \ - " cache %1, 0x020(%0); cache %1, 0x030(%0) \n" \ - " cache %1, 0x040(%0); cache %1, 0x050(%0) \n" \ - " cache %1, 0x060(%0); cache %1, 0x070(%0) \n" \ - " cache %1, 0x080(%0); cache %1, 0x090(%0) \n" \ - " cache %1, 0x0a0(%0); cache %1, 0x0b0(%0) \n" \ - " cache %1, 0x0c0(%0); cache %1, 0x0d0(%0) \n" \ - " cache %1, 0x0e0(%0); cache %1, 0x0f0(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x110(%0) \n" \ - " cache %1, 0x120(%0); cache %1, 0x130(%0) \n" \ - " cache %1, 0x140(%0); cache %1, 0x150(%0) \n" \ - " cache %1, 0x160(%0); cache %1, 0x170(%0) \n" \ - " cache %1, 0x180(%0); cache %1, 0x190(%0) \n" \ - " cache %1, 0x1a0(%0); cache %1, 0x1b0(%0) \n" \ - " cache %1, 0x1c0(%0); cache %1, 0x1d0(%0) \n" \ - " cache %1, 0x1e0(%0); cache %1, 0x1f0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache32_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x020(%0) \n" \ - " cache %1, 0x040(%0); cache %1, 0x060(%0) \n" \ - " cache %1, 0x080(%0); cache %1, 0x0a0(%0) \n" \ - " cache %1, 0x0c0(%0); cache %1, 0x0e0(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x120(%0) \n" \ - " cache %1, 0x140(%0); cache %1, 0x160(%0) \n" \ - " cache %1, 0x180(%0); cache %1, 0x1a0(%0) \n" \ - " cache %1, 0x1c0(%0); cache %1, 0x1e0(%0) \n" \ - " cache %1, 0x200(%0); cache %1, 0x220(%0) \n" \ - " cache %1, 0x240(%0); cache %1, 0x260(%0) \n" \ - " cache %1, 0x280(%0); cache %1, 0x2a0(%0) \n" \ - " cache %1, 0x2c0(%0); cache %1, 0x2e0(%0) \n" \ - " cache %1, 0x300(%0); cache %1, 0x320(%0) \n" \ - " cache %1, 0x340(%0); cache %1, 0x360(%0) \n" \ - " cache %1, 0x380(%0); cache %1, 0x3a0(%0) \n" \ - " cache %1, 0x3c0(%0); cache %1, 0x3e0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache64_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x040(%0) \n" \ - " cache %1, 0x080(%0); cache %1, 0x0c0(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x140(%0) \n" \ - " cache %1, 0x180(%0); cache %1, 0x1c0(%0) \n" \ - " cache %1, 0x200(%0); cache %1, 0x240(%0) \n" \ - " cache %1, 0x280(%0); cache %1, 0x2c0(%0) \n" \ - " cache %1, 0x300(%0); cache %1, 0x340(%0) \n" \ - " cache %1, 0x380(%0); cache %1, 0x3c0(%0) \n" \ - " cache %1, 0x400(%0); cache %1, 0x440(%0) \n" \ - " cache %1, 0x480(%0); cache %1, 0x4c0(%0) \n" \ - " cache %1, 0x500(%0); cache %1, 0x540(%0) \n" \ - " cache %1, 0x580(%0); cache %1, 0x5c0(%0) \n" \ - " cache %1, 0x600(%0); cache %1, 0x640(%0) \n" \ - " cache %1, 0x680(%0); cache %1, 0x6c0(%0) \n" \ - " cache %1, 0x700(%0); cache %1, 0x740(%0) \n" \ - " cache %1, 0x780(%0); cache %1, 0x7c0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache128_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x080(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x180(%0) \n" \ - " cache %1, 0x200(%0); cache %1, 0x280(%0) \n" \ - " cache %1, 0x300(%0); cache %1, 0x380(%0) \n" \ - " cache %1, 0x400(%0); cache %1, 0x480(%0) \n" \ - " cache %1, 0x500(%0); cache %1, 0x580(%0) \n" \ - " cache %1, 0x600(%0); cache %1, 0x680(%0) \n" \ - " cache %1, 0x700(%0); cache %1, 0x780(%0) \n" \ - " cache %1, 0x800(%0); cache %1, 0x880(%0) \n" \ - " cache %1, 0x900(%0); cache %1, 0x980(%0) \n" \ - " cache %1, 0xa00(%0); cache %1, 0xa80(%0) \n" \ - " cache %1, 0xb00(%0); cache %1, 0xb80(%0) \n" \ - " cache %1, 0xc00(%0); cache %1, 0xc80(%0) \n" \ - " cache %1, 0xd00(%0); cache %1, 0xd80(%0) \n" \ - " cache %1, 0xe00(%0); cache %1, 0xe80(%0) \n" \ - " cache %1, 0xf00(%0); cache %1, 0xf80(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#else -/* - * MIPS R6 changed the cache opcode and moved to a 8-bit offset field. - * This means we now need to increment the base register before we flush - * more cache lines - */ -#define cache16_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push\n" \ - " .set noreorder\n" \ - " .set mips64r6\n" \ - " .set noat\n" \ - " cache %1, 0x000(%0); cache %1, 0x010(%0)\n" \ - " cache %1, 0x020(%0); cache %1, 0x030(%0)\n" \ - " cache %1, 0x040(%0); cache %1, 0x050(%0)\n" \ - " cache %1, 0x060(%0); cache %1, 0x070(%0)\n" \ - " cache %1, 0x080(%0); cache %1, 0x090(%0)\n" \ - " cache %1, 0x0a0(%0); cache %1, 0x0b0(%0)\n" \ - " cache %1, 0x0c0(%0); cache %1, 0x0d0(%0)\n" \ - " cache %1, 0x0e0(%0); cache %1, 0x0f0(%0)\n" \ - " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x010($1)\n" \ - " cache %1, 0x020($1); cache %1, 0x030($1)\n" \ - " cache %1, 0x040($1); cache %1, 0x050($1)\n" \ - " cache %1, 0x060($1); cache %1, 0x070($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x090($1)\n" \ - " cache %1, 0x0a0($1); cache %1, 0x0b0($1)\n" \ - " cache %1, 0x0c0($1); cache %1, 0x0d0($1)\n" \ - " cache %1, 0x0e0($1); cache %1, 0x0f0($1)\n" \ - " .set pop\n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache32_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push\n" \ - " .set noreorder\n" \ - " .set mips64r6\n" \ - " .set noat\n" \ - " cache %1, 0x000(%0); cache %1, 0x020(%0)\n" \ - " cache %1, 0x040(%0); cache %1, 0x060(%0)\n" \ - " cache %1, 0x080(%0); cache %1, 0x0a0(%0)\n" \ - " cache %1, 0x0c0(%0); cache %1, 0x0e0(%0)\n" \ - " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x020($1)\n" \ - " cache %1, 0x040($1); cache %1, 0x060($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0a0($1)\n" \ - " cache %1, 0x0c0($1); cache %1, 0x0e0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x020($1)\n" \ - " cache %1, 0x040($1); cache %1, 0x060($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0a0($1)\n" \ - " cache %1, 0x0c0($1); cache %1, 0x0e0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100\n" \ - " cache %1, 0x000($1); cache %1, 0x020($1)\n" \ - " cache %1, 0x040($1); cache %1, 0x060($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0a0($1)\n" \ - " cache %1, 0x0c0($1); cache %1, 0x0e0($1)\n" \ - " .set pop\n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache64_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push\n" \ - " .set noreorder\n" \ - " .set mips64r6\n" \ - " .set noat\n" \ - " cache %1, 0x000(%0); cache %1, 0x040(%0)\n" \ - " cache %1, 0x080(%0); cache %1, 0x0c0(%0)\n" \ - " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " .set pop\n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache128_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push\n" \ - " .set noreorder\n" \ - " .set mips64r6\n" \ - " .set noat\n" \ - " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \ - " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " .set pop\n" \ - : \ - : "r" (base), \ - "i" (op)); -#endif /* CONFIG_CPU_MIPSR6 */ - -/* - * Perform the cache operation specified by op using a user mode virtual - * address while in kernel mode. - */ -#define cache16_unroll32_user(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips0 \n" \ - " .set eva \n" \ - " cachee %1, 0x000(%0); cachee %1, 0x010(%0) \n" \ - " cachee %1, 0x020(%0); cachee %1, 0x030(%0) \n" \ - " cachee %1, 0x040(%0); cachee %1, 0x050(%0) \n" \ - " cachee %1, 0x060(%0); cachee %1, 0x070(%0) \n" \ - " cachee %1, 0x080(%0); cachee %1, 0x090(%0) \n" \ - " cachee %1, 0x0a0(%0); cachee %1, 0x0b0(%0) \n" \ - " cachee %1, 0x0c0(%0); cachee %1, 0x0d0(%0) \n" \ - " cachee %1, 0x0e0(%0); cachee %1, 0x0f0(%0) \n" \ - " cachee %1, 0x100(%0); cachee %1, 0x110(%0) \n" \ - " cachee %1, 0x120(%0); cachee %1, 0x130(%0) \n" \ - " cachee %1, 0x140(%0); cachee %1, 0x150(%0) \n" \ - " cachee %1, 0x160(%0); cachee %1, 0x170(%0) \n" \ - " cachee %1, 0x180(%0); cachee %1, 0x190(%0) \n" \ - " cachee %1, 0x1a0(%0); cachee %1, 0x1b0(%0) \n" \ - " cachee %1, 0x1c0(%0); cachee %1, 0x1d0(%0) \n" \ - " cachee %1, 0x1e0(%0); cachee %1, 0x1f0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache32_unroll32_user(base, op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips0 \n" \ - " .set eva \n" \ - " cachee %1, 0x000(%0); cachee %1, 0x020(%0) \n" \ - " cachee %1, 0x040(%0); cachee %1, 0x060(%0) \n" \ - " cachee %1, 0x080(%0); cachee %1, 0x0a0(%0) \n" \ - " cachee %1, 0x0c0(%0); cachee %1, 0x0e0(%0) \n" \ - " cachee %1, 0x100(%0); cachee %1, 0x120(%0) \n" \ - " cachee %1, 0x140(%0); cachee %1, 0x160(%0) \n" \ - " cachee %1, 0x180(%0); cachee %1, 0x1a0(%0) \n" \ - " cachee %1, 0x1c0(%0); cachee %1, 0x1e0(%0) \n" \ - " cachee %1, 0x200(%0); cachee %1, 0x220(%0) \n" \ - " cachee %1, 0x240(%0); cachee %1, 0x260(%0) \n" \ - " cachee %1, 0x280(%0); cachee %1, 0x2a0(%0) \n" \ - " cachee %1, 0x2c0(%0); cachee %1, 0x2e0(%0) \n" \ - " cachee %1, 0x300(%0); cachee %1, 0x320(%0) \n" \ - " cachee %1, 0x340(%0); cachee %1, 0x360(%0) \n" \ - " cachee %1, 0x380(%0); cachee %1, 0x3a0(%0) \n" \ - " cachee %1, 0x3c0(%0); cachee %1, 0x3e0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache64_unroll32_user(base, op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips0 \n" \ - " .set eva \n" \ - " cachee %1, 0x000(%0); cachee %1, 0x040(%0) \n" \ - " cachee %1, 0x080(%0); cachee %1, 0x0c0(%0) \n" \ - " cachee %1, 0x100(%0); cachee %1, 0x140(%0) \n" \ - " cachee %1, 0x180(%0); cachee %1, 0x1c0(%0) \n" \ - " cachee %1, 0x200(%0); cachee %1, 0x240(%0) \n" \ - " cachee %1, 0x280(%0); cachee %1, 0x2c0(%0) \n" \ - " cachee %1, 0x300(%0); cachee %1, 0x340(%0) \n" \ - " cachee %1, 0x380(%0); cachee %1, 0x3c0(%0) \n" \ - " cachee %1, 0x400(%0); cachee %1, 0x440(%0) \n" \ - " cachee %1, 0x480(%0); cachee %1, 0x4c0(%0) \n" \ - " cachee %1, 0x500(%0); cachee %1, 0x540(%0) \n" \ - " cachee %1, 0x580(%0); cachee %1, 0x5c0(%0) \n" \ - " cachee %1, 0x600(%0); cachee %1, 0x640(%0) \n" \ - " cachee %1, 0x680(%0); cachee %1, 0x6c0(%0) \n" \ - " cachee %1, 0x700(%0); cachee %1, 0x740(%0) \n" \ - " cachee %1, 0x780(%0); cachee %1, 0x7c0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); +#define cache_unroll(times, insn, op, addr, lsize) do { \ + int i = 0; \ + unroll(times, _cache_op, insn, op, (addr) + (i++ * (lsize))); \ +} while (0) /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ #define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra) \ @@ -539,7 +216,8 @@ static inline void extra##blast_##pfx##cache##lsize(void) \ \ for (ws = 0; ws < ws_end; ws += ws_inc) \ for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ + cache_unroll(32, kernel_cache, indexop, \ + addr | ws, lsize); \ } \ \ static inline void extra##blast_##pfx##cache##lsize##_page(unsigned long page) \ @@ -548,7 +226,7 @@ static inline void extra##blast_##pfx##cache##lsize##_page(unsigned long page) \ unsigned long end = page + PAGE_SIZE; \ \ do { \ - cache##lsize##_unroll32(start, hitop); \ + cache_unroll(32, kernel_cache, hitop, start, lsize); \ start += lsize * 32; \ } while (start < end); \ } \ @@ -565,7 +243,8 @@ static inline void extra##blast_##pfx##cache##lsize##_page_indexed(unsigned long \ for (ws = 0; ws < ws_end; ws += ws_inc) \ for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ + cache_unroll(32, kernel_cache, indexop, \ + addr | ws, lsize); \ } __BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, ) @@ -596,7 +275,7 @@ static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \ unsigned long end = page + PAGE_SIZE; \ \ do { \ - cache##lsize##_unroll32_user(start, hitop); \ + cache_unroll(32, user_cache, hitop, start, lsize); \ start += lsize * 32; \ } while (start < end); \ } @@ -688,7 +367,8 @@ static inline void blast_##pfx##cache##lsize##_node(long node) \ \ for (ws = 0; ws < ws_end; ws += ws_inc) \ for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ + cache_unroll(32, kernel_cache, indexop, \ + addr | ws, lsize); \ } __BUILD_BLAST_CACHE_NODE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) diff --git a/arch/mips/include/asm/sgi/heart.h b/arch/mips/include/asm/sgi/heart.h new file mode 100644 index 000000000000..c423221b4792 --- /dev/null +++ b/arch/mips/include/asm/sgi/heart.h @@ -0,0 +1,272 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * HEART chip definitions + * + * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org> + * 2009 Johannes Dickgreber <tanzy@gmx.de> + * 2007-2015 Joshua Kinard <kumba@gentoo.org> + */ +#ifndef __ASM_SGI_HEART_H +#define __ASM_SGI_HEART_H + +#include <linux/types.h> +#include <linux/time.h> + +/* + * There are 8 DIMM slots on an IP30 system + * board, which are grouped into four banks + */ +#define HEART_MEMORY_BANKS 4 + +/* HEART can support up to four CPUs */ +#define HEART_MAX_CPUS 4 + +#define HEART_XKPHYS_BASE ((void *)(IO_BASE | 0x000000000ff00000ULL)) + +/** + * struct ip30_heart_regs - struct that maps IP30 HEART registers. + * @mode: HEART_MODE - Purpose Unknown, machine reset called from here. + * @sdram_mode: HEART_SDRAM_MODE - purpose unknown. + * @mem_refresh: HEART_MEM_REF - purpose unknown. + * @mem_req_arb: HEART_MEM_REQ_ARB - purpose unknown. + * @mem_cfg.q: union for 64bit access to HEART_MEMCFG - 4x 64bit registers. + * @mem_cfg.l: union for 32bit access to HEART_MEMCFG - 8x 32bit registers. + * @fc_mode: HEART_FC_MODE - Purpose Unknown, possibly for GFX flow control. + * @fc_timer_limit: HEART_FC_TIMER_LIMIT - purpose unknown. + * @fc_addr: HEART_FC0_ADDR, HEART_FC1_ADDR - purpose unknown. + * @fc_credit_cnt: HEART_FC0_CR_CNT, HEART_FC1_CR_CNT - purpose unknown. + * @fc_timer: HEART_FC0_TIMER, HEART_FC1_TIMER - purpose unknown. + * @status: HEART_STATUS - HEART status information. + * @bus_err_addr: HEART_BERR_ADDR - likely contains addr of recent SIGBUS. + * @bus_err_misc: HEART_BERR_MISC - purpose unknown. + * @mem_err_addr: HEART_MEMERR_ADDR - likely contains addr of recent mem err. + * @mem_err_data: HEART_MEMERR_DATA - purpose unknown. + * @piur_acc_err: HEART_PIUR_ACC_ERR - likely for access err to HEART regs. + * @mlan_clock_div: HEART_MLAN_CLK_DIV - MicroLAN clock divider. + * @mlan_ctrl: HEART_MLAN_CTL - MicroLAN control. + * @__pad0: 0x0f40 bytes of padding -> next HEART register 0x01000. + * @undefined: Undefined/diag register, write to it triggers PIUR_ACC_ERR. + * @__pad1: 0xeff8 bytes of padding -> next HEART register 0x10000. + * @imr: HEART_IMR0 to HEART_IMR3 - per-cpu interrupt mask register. + * @set_isr: HEART_SET_ISR - set interrupt status register. + * @clear_isr: HEART_CLR_ISR - clear interrupt status register. + * @isr: HEART_ISR - interrupt status register (read-only). + * @imsr: HEART_IMSR - purpose unknown. + * @cause: HEART_CAUSE - HEART cause information. + * @__pad2: 0xffb8 bytes of padding -> next HEART register 0x20000. + * @count: HEART_COUNT - 52-bit counter. + * @__pad3: 0xfff8 bytes of padding -> next HEART register 0x30000. + * @compare: HEART_COMPARE - 24-bit compare. + * @__pad4: 0xfff8 bytes of padding -> next HEART register 0x40000. + * @trigger: HEART_TRIGGER - purpose unknown. + * @__pad5: 0xfff8 bytes of padding -> next HEART register 0x50000. + * @cpuid: HEART_PRID - contains CPU ID of CPU currently accessing HEART. + * @__pad6: 0xfff8 bytes of padding -> next HEART register 0x60000. + * @sync: HEART_SYNC - purpose unknown. + * + * HEART is the main system controller ASIC for IP30 system. It incorporates + * a memory controller, interrupt status/cause/set/clear management, basic + * timer with count/compare, and other functionality. For Linux, not all of + * HEART's functions are fully understood. + * + * Implementation note: All HEART registers are 64bits-wide, but the mem_cfg + * register only reports correct values if queried in 32bits. Hence the need + * for a union. Even though mem_cfg.l has 8 array slots, we only ever query + * up to 4 of those. IP30 has 8 DIMM slots arranged into 4 banks, w/ 2 DIMMs + * per bank. Each 32bit read accesses one of these banks. Perhaps HEART was + * designed to address up to 8 banks (16 DIMMs)? We may never know. + */ +struct ip30_heart_regs { /* 0x0ff00000 */ + u64 mode; /* + 0x00000 */ + /* Memory */ + u64 sdram_mode; /* + 0x00008 */ + u64 mem_refresh; /* + 0x00010 */ + u64 mem_req_arb; /* + 0x00018 */ + union { + u64 q[HEART_MEMORY_BANKS]; /* readq() */ + u32 l[HEART_MEMORY_BANKS * 2]; /* readl() */ + } mem_cfg; /* + 0x00020 */ + /* Flow control (gfx?) */ + u64 fc_mode; /* + 0x00040 */ + u64 fc_timer_limit; /* + 0x00048 */ + u64 fc_addr[2]; /* + 0x00050 */ + u64 fc_credit_cnt[2]; /* + 0x00060 */ + u64 fc_timer[2]; /* + 0x00070 */ + /* Status */ + u64 status; /* + 0x00080 */ + /* Bus error */ + u64 bus_err_addr; /* + 0x00088 */ + u64 bus_err_misc; /* + 0x00090 */ + /* Memory error */ + u64 mem_err_addr; /* + 0x00098 */ + u64 mem_err_data; /* + 0x000a0 */ + /* Misc */ + u64 piur_acc_err; /* + 0x000a8 */ + u64 mlan_clock_div; /* + 0x000b0 */ + u64 mlan_ctrl; /* + 0x000b8 */ + u64 __pad0[0x01e8]; /* + 0x000c0 + 0x0f40 */ + /* Undefined */ + u64 undefined; /* + 0x01000 */ + u64 __pad1[0x1dff]; /* + 0x01008 + 0xeff8 */ + /* Interrupts */ + u64 imr[HEART_MAX_CPUS]; /* + 0x10000 */ + u64 set_isr; /* + 0x10020 */ + u64 clear_isr; /* + 0x10028 */ + u64 isr; /* + 0x10030 */ + u64 imsr; /* + 0x10038 */ + u64 cause; /* + 0x10040 */ + u64 __pad2[0x1ff7]; /* + 0x10048 + 0xffb8 */ + /* Timer */ + u64 count; /* + 0x20000 */ + u64 __pad3[0x1fff]; /* + 0x20008 + 0xfff8 */ + u64 compare; /* + 0x30000 */ + u64 __pad4[0x1fff]; /* + 0x30008 + 0xfff8 */ + u64 trigger; /* + 0x40000 */ + u64 __pad5[0x1fff]; /* + 0x40008 + 0xfff8 */ + /* Misc */ + u64 cpuid; /* + 0x50000 */ + u64 __pad6[0x1fff]; /* + 0x50008 + 0xfff8 */ + u64 sync; /* + 0x60000 */ +}; + + +/* For timer-related bits. */ +#define HEART_NS_PER_CYCLE 80 +#define HEART_CYCLES_PER_SEC (NSEC_PER_SEC / HEART_NS_PER_CYCLE) + + +/* + * XXX: Everything below this comment will either go away or be cleaned + * up to fit in better with Linux. A lot of the bit definitions for + * HEART were derived from IRIX's sys/RACER/heart.h header file. + */ + +/* HEART Masks */ +#define HEART_ATK_MASK 0x0007ffffffffffff /* HEART attack mask */ +#define HEART_ACK_ALL_MASK 0xffffffffffffffff /* Ack everything */ +#define HEART_CLR_ALL_MASK 0x0000000000000000 /* Clear all */ +#define HEART_BR_ERR_MASK 0x7ff8000000000000 /* BRIDGE error mask */ +#define HEART_CPU0_ERR_MASK 0x8ff8000000000000 /* CPU0 error mask */ +#define HEART_CPU1_ERR_MASK 0x97f8000000000000 /* CPU1 error mask */ +#define HEART_CPU2_ERR_MASK 0xa7f8000000000000 /* CPU2 error mask */ +#define HEART_CPU3_ERR_MASK 0xc7f8000000000000 /* CPU3 error mask */ +#define HEART_ERR_MASK 0x1ff /* HEART error mask */ +#define HEART_ERR_MASK_START 51 /* HEART error start */ +#define HEART_ERR_MASK_END 63 /* HEART error end */ + +/* Bits in the HEART_MODE register. */ +#define HM_PROC_DISABLE_SHFT 60 +#define HM_PROC_DISABLE_MSK (0xfUL << HM_PROC_DISABLE_SHFT) +#define HM_PROC_DISABLE(x) (0x1UL << (x) + HM_PROC_DISABLE_SHFT) +#define HM_MAX_PSR (0x7UL << 57) +#define HM_MAX_IOSR (0x7UL << 54) +#define HM_MAX_PEND_IOSR (0x7UL << 51) +#define HM_TRIG_SRC_SEL_MSK (0x7UL << 48) +#define HM_TRIG_HEART_EXC (0x0UL << 48) +#define HM_TRIG_REG_BIT (0x1UL << 48) +#define HM_TRIG_SYSCLK (0x2UL << 48) +#define HM_TRIG_MEMCLK_2X (0x3UL << 48) +#define HM_TRIG_MEMCLK (0x4UL << 48) +#define HM_TRIG_IOCLK (0x5UL << 48) +#define HM_PIU_TEST_MODE (0xfUL << 40) +#define HM_GP_FLAG_MSK (0xfUL << 36) +#define HM_GP_FLAG(x) BIT((x) + 36) +#define HM_MAX_PROC_HYST (0xfUL << 32) +#define HM_LLP_WRST_AFTER_RST BIT(28) +#define HM_LLP_LINK_RST BIT(27) +#define HM_LLP_WARM_RST BIT(26) +#define HM_COR_ECC_LCK BIT(25) +#define HM_REDUCED_PWR BIT(24) +#define HM_COLD_RST BIT(23) +#define HM_SW_RST BIT(22) +#define HM_MEM_FORCE_WR BIT(21) +#define HM_DB_ERR_GEN BIT(20) +#define HM_SB_ERR_GEN BIT(19) +#define HM_CACHED_PIO_EN BIT(18) +#define HM_CACHED_PROM_EN BIT(17) +#define HM_PE_SYS_COR_ERE BIT(16) +#define HM_GLOBAL_ECC_EN BIT(15) +#define HM_IO_COH_EN BIT(14) +#define HM_INT_EN BIT(13) +#define HM_DATA_CHK_EN BIT(12) +#define HM_REF_EN BIT(11) +#define HM_BAD_SYSWR_ERE BIT(10) +#define HM_BAD_SYSRD_ERE BIT(9) +#define HM_SYSSTATE_ERE BIT(8) +#define HM_SYSCMD_ERE BIT(7) +#define HM_NCOR_SYS_ERE BIT(6) +#define HM_COR_SYS_ERE BIT(5) +#define HM_DATA_ELMNT_ERE BIT(4) +#define HM_MEM_ADDR_PROC_ERE BIT(3) +#define HM_MEM_ADDR_IO_ERE BIT(2) +#define HM_NCOR_MEM_ERE BIT(1) +#define HM_COR_MEM_ERE BIT(0) + +/* Bits in the HEART_MEM_REF register. */ +#define HEART_MEMREF_REFS(x) ((0xfUL & (x)) << 16) +#define HEART_MEMREF_PERIOD(x) ((0xffffUL & (x))) +#define HEART_MEMREF_REFS_VAL HEART_MEMREF_REFS(8) +#define HEART_MEMREF_PERIOD_VAL HEART_MEMREF_PERIOD(0x4000) +#define HEART_MEMREF_VAL (HEART_MEMREF_REFS_VAL | \ + HEART_MEMREF_PERIOD_VAL) + +/* Bits in the HEART_MEM_REQ_ARB register. */ +#define HEART_MEMARB_IODIS (1 << 20) +#define HEART_MEMARB_MAXPMWRQS (15 << 16) +#define HEART_MEMARB_MAXPMRRQS (15 << 12) +#define HEART_MEMARB_MAXPMRQS (15 << 8) +#define HEART_MEMARB_MAXRRRQS (15 << 4) +#define HEART_MEMARB_MAXGBRRQS (15) + +/* Bits in the HEART_MEMCFG<x> registers. */ +#define HEART_MEMCFG_VALID 0x80000000 /* Bank is valid */ +#define HEART_MEMCFG_DENSITY 0x01c00000 /* Mem density */ +#define HEART_MEMCFG_SIZE_MASK 0x003f0000 /* Mem size mask */ +#define HEART_MEMCFG_ADDR_MASK 0x000001ff /* Base addr mask */ +#define HEART_MEMCFG_SIZE_SHIFT 16 /* Mem size shift */ +#define HEART_MEMCFG_DENSITY_SHIFT 22 /* Density Shift */ +#define HEART_MEMCFG_UNIT_SHIFT 25 /* Unit Shift, 32MB */ + +/* Bits in the HEART_STATUS register */ +#define HEART_STAT_HSTL_SDRV BIT(14) +#define HEART_STAT_FC_CR_OUT(x) BIT((x) + 12) +#define HEART_STAT_DIR_CNNCT BIT(11) +#define HEART_STAT_TRITON BIT(10) +#define HEART_STAT_R4K BIT(9) +#define HEART_STAT_BIG_ENDIAN BIT(8) +#define HEART_STAT_PROC_SHFT 4 +#define HEART_STAT_PROC_MSK (0xfUL << HEART_STAT_PROC_SHFT) +#define HEART_STAT_PROC_ACTIVE(x) (0x1UL << ((x) + HEART_STAT_PROC_SHFT)) +#define HEART_STAT_WIDGET_ID 0xf + +/* Bits in the HEART_CAUSE register */ +#define HC_PE_SYS_COR_ERR_MSK (0xfUL << 60) +#define HC_PE_SYS_COR_ERR(x) BIT((x) + 60) +#define HC_PIOWDB_OFLOW BIT(44) +#define HC_PIORWRB_OFLOW BIT(43) +#define HC_PIUR_ACC_ERR BIT(42) +#define HC_BAD_SYSWR_ERR BIT(41) +#define HC_BAD_SYSRD_ERR BIT(40) +#define HC_SYSSTATE_ERR_MSK (0xfUL << 36) +#define HC_SYSSTATE_ERR(x) BIT((x) + 36) +#define HC_SYSCMD_ERR_MSK (0xfUL << 32) +#define HC_SYSCMD_ERR(x) BIT((x) + 32) +#define HC_NCOR_SYSAD_ERR_MSK (0xfUL << 28) +#define HC_NCOR_SYSAD_ERR(x) BIT((x) + 28) +#define HC_COR_SYSAD_ERR_MSK (0xfUL << 24) +#define HC_COR_SYSAD_ERR(x) BIT((x) + 24) +#define HC_DATA_ELMNT_ERR_MSK (0xfUL << 20) +#define HC_DATA_ELMNT_ERR(x) BIT((x) + 20) +#define HC_WIDGET_ERR BIT(16) +#define HC_MEM_ADDR_ERR_PROC_MSK (0xfUL << 4) +#define HC_MEM_ADDR_ERR_PROC(x) BIT((x) + 4) +#define HC_MEM_ADDR_ERR_IO BIT(2) +#define HC_NCOR_MEM_ERR BIT(1) +#define HC_COR_MEM_ERR BIT(0) + +extern struct ip30_heart_regs __iomem *heart_regs; + +#define heart_read ____raw_readq +#define heart_write ____raw_writeq + +#endif /* __ASM_SGI_HEART_H */ diff --git a/arch/mips/include/asm/sgi/sgi.h b/arch/mips/include/asm/sgi/sgi.h deleted file mode 100644 index b61557151e3f..000000000000 --- a/arch/mips/include/asm/sgi/sgi.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * sgi.h: Definitions specific to SGI machines. - * - * Copyright (C) 1996 David S. Miller (dm@sgi.com) - */ -#ifndef _ASM_SGI_SGI_H -#define _ASM_SGI_SGI_H - -/* UP=UniProcessor MP=MultiProcessor(capable) */ -enum sgi_mach { - ip4, /* R2k UP */ - ip5, /* R2k MP */ - ip6, /* R3k UP */ - ip7, /* R3k MP */ - ip9, /* R3k UP */ - ip12, /* R3kA UP, Indigo */ - ip15, /* R3kA MP */ - ip17, /* R4K UP */ - ip19, /* R4K MP */ - ip20, /* R4K UP, Indigo */ - ip21, /* R8k/TFP MP */ - ip22, /* R4x00 UP, Indy, Indigo2 */ - ip25, /* R10k MP */ - ip26, /* R8k/TFP UP, Indigo2 */ - ip27, /* R10k MP, R12k MP, R14k MP, Origin 200/2k, Onyx2 */ - ip28, /* R10k UP, Indigo2 Impact R10k */ - ip30, /* R10k MP, R12k MP, R14k MP, Octane */ - ip32, /* R5k UP, RM5200 UP, RM7k UP, R10k UP, R12k UP, O2 */ - ip35, /* R14k MP, R16k MP, Origin 300/3k, Onyx3, Fuel, Tezro */ -}; - -extern enum sgi_mach sgimach; -extern void sgi_sysinit(void); - -/* Many I/O space registers are byte sized and are contained within - * one byte per word, specifically the MSB, this macro helps out. - */ -#ifdef __MIPSEL__ -#define SGI_MSB(regaddr) (regaddr) -#else -#define SGI_MSB(regaddr) ((regaddr) | 0x3) -#endif - -#endif /* _ASM_SGI_SGI_H */ diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h index 0d9fad5915fe..80f900417f7e 100644 --- a/arch/mips/include/asm/sgialib.h +++ b/arch/mips/include/asm/sgialib.h @@ -15,14 +15,6 @@ #include <asm/sgiarcs.h> extern struct linux_romvec *romvec; -extern int prom_argc; - -extern LONG *_prom_argv, *_prom_envp; - -/* A 32-bit ARC PROM pass arguments and environment as 32-bit pointer. - These macros take care of sign extension. */ -#define prom_argv(index) ((char *) (long) _prom_argv[(index)]) -#define prom_argc(index) ((char *) (long) _prom_argc[(index)]) extern int prom_flags; @@ -47,12 +39,6 @@ extern void prom_meminit(void); /* PROM device tree library routines. */ #define PROM_NULL_COMPONENT ((pcomponent *) 0) -/* Get sibling component of THIS. */ -extern pcomponent *ArcGetPeer(pcomponent *this); - -/* Get child component of THIS. */ -extern pcomponent *ArcGetChild(pcomponent *this); - /* This is called at prom_init time to identify the * ARC architecture we are running on */ @@ -60,22 +46,16 @@ extern void prom_identify_arch(void); /* Environment variable routines. */ extern PCHAR ArcGetEnvironmentVariable(PCHAR name); -extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value); /* ARCS command line parsing. */ -extern void prom_init_cmdline(void); +extern void prom_init_cmdline(int argc, LONG *argv); /* File operations. */ extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt); extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt); /* Misc. routines. */ -extern VOID ArcHalt(VOID) __noreturn; -extern VOID ArcPowerDown(VOID) __noreturn; -extern VOID ArcRestart(VOID) __noreturn; -extern VOID ArcReboot(VOID) __noreturn; extern VOID ArcEnterInteractiveMode(VOID) __noreturn; -extern VOID ArcFlushAllCaches(VOID); extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID); #endif /* _ASM_SGIALIB_H */ diff --git a/arch/mips/include/asm/sgiarcs.h b/arch/mips/include/asm/sgiarcs.h index 105a9479ac5f..e1512cab180b 100644 --- a/arch/mips/include/asm/sgiarcs.h +++ b/arch/mips/include/asm/sgiarcs.h @@ -12,6 +12,8 @@ #ifndef _ASM_SGIARCS_H #define _ASM_SGIARCS_H +#include <linux/kernel.h> + #include <asm/types.h> #include <asm/fw/arc/types.h> @@ -368,110 +370,65 @@ struct linux_smonblock { #if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32) -#define __arc_clobbers \ - "$2", "$3" /* ... */, "$8", "$9", "$10", "$11", \ - "$12", "$13", "$14", "$15", "$16", "$24", "$25", "$31" +extern long call_o32(long vec, void *stack, ...); + +extern u64 o32_stk[4096]; +#define O32_STK (&o32_stk[ARRAY_SIZE(o32_stk)]) #define ARC_CALL0(dest) \ ({ long __res; \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec) \ - : __arc_clobbers, "$4", "$5", "$6", "$7"); \ - (unsigned long) __res; \ + __res = call_o32(__vec, O32_STK); \ + __res; \ }) #define ARC_CALL1(dest, a1) \ ({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + int __a1 = (int) (long) (a1); \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1) \ - : __arc_clobbers, "$5", "$6", "$7"); \ - (unsigned long) __res; \ + __res = call_o32(__vec, O32_STK, __a1); \ + __res; \ }) #define ARC_CALL2(dest, a1, a2) \ ({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ + int __a1 = (int) (long) (a1); \ + int __a2 = (int) (long) (a2); \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1), "r" (__a2) \ - : __arc_clobbers, "$6", "$7"); \ + __res = call_o32(__vec, O32_STK, __a1, __a2); \ __res; \ }) #define ARC_CALL3(dest, a1, a2, a3) \ ({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ - register signed int __a3 __asm__("$6") = (int) (long) (a3); \ + int __a1 = (int) (long) (a1); \ + int __a2 = (int) (long) (a2); \ + int __a3 = (int) (long) (a3); \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3) \ - : __arc_clobbers, "$7"); \ + __res = call_o32(__vec, O32_STK, __a1, __a2, __a3); \ __res; \ }) #define ARC_CALL4(dest, a1, a2, a3, a4) \ ({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ - register signed int __a3 __asm__("$6") = (int) (long) (a3); \ - register signed int __a4 __asm__("$7") = (int) (long) (a4); \ + int __a1 = (int) (long) (a1); \ + int __a2 = (int) (long) (a2); \ + int __a3 = (int) (long) (a3); \ + int __a4 = (int) (long) (a4); \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), \ - "r" (__a4) \ - : __arc_clobbers); \ + __res = call_o32(__vec, O32_STK, __a1, __a2, __a3, __a4); \ __res; \ }) -#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \ +#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \ ({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ - register signed int __a3 __asm__("$6") = (int) (long) (a3); \ - register signed int __a4 __asm__("$7") = (int) (long) (a4); \ - register signed int __a5 = (int) (long) (a5); \ + int __a1 = (int) (long) (a1); \ + int __a2 = (int) (long) (a2); \ + int __a3 = (int) (long) (a3); \ + int __a4 = (int) (long) (a4); \ + int __a5 = (int) (long) (a5); \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "sw\t%7, 16($29)\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), \ - "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), \ - "r" (__a5) \ - : __arc_clobbers); \ + __res = call_o32(__vec, O32_STK, __a1, __a2, __a3, __a4, __a5); \ __res; \ }) diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h index e33d09293019..7e9b3271737a 100644 --- a/arch/mips/include/asm/sn/agent.h +++ b/arch/mips/include/asm/sn/agent.h @@ -26,7 +26,7 @@ #if defined(CONFIG_SGI_IP27) #define HUB_NIC_ADDR(_cpuid) \ - REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)), \ + REMOTE_HUB_ADDR(cpu_to_node(_cpuid), \ MD_MLAN_CTL) #endif diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h index 3f1fb1454749..f7d3273d9599 100644 --- a/arch/mips/include/asm/sn/arch.h +++ b/arch/mips/include/asm/sn/arch.h @@ -19,44 +19,13 @@ #define cputonasid(cpu) (sn_cpu_info[(cpu)].p_nasid) #define cputoslice(cpu) (sn_cpu_info[(cpu)].p_slice) -#define makespnum(_nasid, _slice) \ - (((_nasid) << CPUS_PER_NODE_SHFT) | (_slice)) #define INVALID_NASID (nasid_t)-1 -#define INVALID_CNODEID (cnodeid_t)-1 #define INVALID_PNODEID (pnodeid_t)-1 #define INVALID_MODULE (moduleid_t)-1 #define INVALID_PARTID (partid_t)-1 extern nasid_t get_nasid(void); -extern cnodeid_t get_cpu_cnode(cpuid_t); extern int get_cpu_slice(cpuid_t); -/* - * NO ONE should access these arrays directly. The only reason we refer to - * them here is to avoid the procedure call that would be required in the - * macros below. (Really want private data members here :-) - */ -extern cnodeid_t nasid_to_compact_node[MAX_NASIDS]; -extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; - -/* - * These macros are used by various parts of the kernel to convert - * between the three different kinds of node numbering. At least some - * of them may change to procedure calls in the future, but the macros - * will continue to work. Don't use the arrays above directly. - */ - -#define NASID_TO_REGION(nnode) \ - ((nnode) >> \ - (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT)) - -extern cnodeid_t nasid_to_compact_node[MAX_NASIDS]; -extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; -extern cnodeid_t cpuid_to_compact_node[MAXCPUS]; - -#define NASID_TO_COMPACT_NODEID(nnode) (nasid_to_compact_node[nnode]) -#define COMPACT_TO_NASID_NODEID(cnode) (compact_to_nasid_node[cnode]) -#define CPUID_TO_COMPACT_NODEID(cpu) (cpuid_to_compact_node[(cpu)]) - #endif /* _ASM_SN_ARCH_H */ diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h index 85fa1b5f639d..d52f81620661 100644 --- a/arch/mips/include/asm/sn/gda.h +++ b/arch/mips/include/asm/sn/gda.h @@ -60,9 +60,7 @@ typedef struct gda { /* Pointer to a mask of nodes with copies * of the kernel. */ char g_padding[56]; /* pad out to 128 bytes */ - nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node, - * indexed by cnodeid. - */ + nasid_t g_nasidtable[MAX_NUMNODES]; /* NASID of each node */ } gda_t; #define GDA ((gda_t*) GDA_ADDR(get_nasid())) diff --git a/arch/mips/include/asm/sn/hub.h b/arch/mips/include/asm/sn/hub.h index 338f7eed74f1..45878fbefbae 100644 --- a/arch/mips/include/asm/sn/hub.h +++ b/arch/mips/include/asm/sn/hub.h @@ -10,8 +10,8 @@ #include <asm/xtalk/xtalk.h> /* ip27-hubio.c */ -extern unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, +extern unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget, unsigned long xtalk_addr, size_t size); -extern void hub_pio_init(cnodeid_t cnode); +extern void hub_pio_init(nasid_t nasid); #endif /* __ASM_SN_HUB_H */ diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h index a947eed48fee..78ef760ddde4 100644 --- a/arch/mips/include/asm/sn/ioc3.h +++ b/arch/mips/include/asm/sn/ioc3.h @@ -590,4 +590,13 @@ struct ioc3_etxd { #define MIDR_DATA_MASK 0x0000ffff +/* subsystem IDs supplied by card detection in pci-xtalk-bridge */ +#define IOC3_SUBSYS_IP27_BASEIO6G 0xc300 +#define IOC3_SUBSYS_IP27_MIO 0xc301 +#define IOC3_SUBSYS_IP27_BASEIO 0xc302 +#define IOC3_SUBSYS_IP29_SYSBOARD 0xc303 +#define IOC3_SUBSYS_IP30_SYSBOARD 0xc304 +#define IOC3_SUBSYS_MENET 0xc305 +#define IOC3_SUBSYS_MENET4 0xc306 + #endif /* MIPS_SN_IOC3_H */ diff --git a/arch/mips/include/asm/sn/mapped_kernel.h b/arch/mips/include/asm/sn/mapped_kernel.h index 2f3efa91c16e..3f1049807018 100644 --- a/arch/mips/include/asm/sn/mapped_kernel.h +++ b/arch/mips/include/asm/sn/mapped_kernel.h @@ -37,10 +37,10 @@ #define MAPPED_KERN_RO_TO_PHYS(x) \ ((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \ - MAPPED_KERN_RO_PHYSBASE(get_compact_nodeid())) + MAPPED_KERN_RO_PHYSBASE(get_nasid())) #define MAPPED_KERN_RW_TO_PHYS(x) \ ((unsigned long)MAPPED_ADDR_RW_TO_PHYS(x) | \ - MAPPED_KERN_RW_PHYSBASE(get_compact_nodeid())) + MAPPED_KERN_RW_PHYSBASE(get_nasid())) #else /* CONFIG_MAPPED_KERNEL */ diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h index 425a67e6a947..12f4c4649ff0 100644 --- a/arch/mips/include/asm/sn/sn0/arch.h +++ b/arch/mips/include/asm/sn/sn0/arch.h @@ -12,25 +12,11 @@ #define _ASM_SN_SN0_ARCH_H -#ifndef SN0XXL /* 128 cpu SMP max */ -/* - * This is the maximum number of nodes that can be part of a kernel. - * Effectively, it's the maximum number of compact node ids (cnodeid_t). - */ -#define MAX_COMPACT_NODES 64 - /* * MAXCPUS refers to the maximum number of CPUs in a single kernel. * This is not necessarily the same as MAXNODES * CPUS_PER_NODE */ -#define MAXCPUS 128 - -#else /* SN0XXL system */ - -#define MAX_COMPACT_NODES 128 -#define MAXCPUS 256 - -#endif /* SN0XXL */ +#define MAXCPUS (MAX_NUMNODES * CPUS_PER_NODE) /* * This is the maximum number of NASIDS that can be present in a system. @@ -66,7 +52,5 @@ #define SLOT_MIN_MEM_SIZE (32*1024*1024) #define CPUS_PER_NODE 2 /* CPUs on a single hub */ -#define CPUS_PER_NODE_SHFT 1 /* Bits to shift in the node number */ -#define CPUS_PER_SUBNODE 2 /* CPUs on a single hub PI */ #endif /* _ASM_SN_SN0_ARCH_H */ diff --git a/arch/mips/include/asm/sn/sn_private.h b/arch/mips/include/asm/sn/sn_private.h index f09ba846c644..63a2c30d81c6 100644 --- a/arch/mips/include/asm/sn/sn_private.h +++ b/arch/mips/include/asm/sn/sn_private.h @@ -7,14 +7,13 @@ extern nasid_t master_nasid; extern void cpu_node_probe(void); -extern cnodeid_t get_compact_nodeid(void); -extern void hub_rtc_init(cnodeid_t); +extern void hub_rtc_init(nasid_t nasid); extern void cpu_time_init(void); extern void per_cpu_init(void); extern void install_cpu_nmi_handler(int slice); extern void install_ipi(void); extern void setup_replication_mask(void); extern void replicate_kernel_text(void); -extern unsigned long node_getfirstfree(cnodeid_t); +extern unsigned long node_getfirstfree(nasid_t nasid); #endif /* __ASM_SN_SN_PRIVATE_H */ diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h index 6d24d4e8b9ed..203c927e84d1 100644 --- a/arch/mips/include/asm/sn/types.h +++ b/arch/mips/include/asm/sn/types.h @@ -12,13 +12,9 @@ #include <linux/types.h> typedef unsigned long cpuid_t; -typedef unsigned long cnodemask_t; typedef signed short nasid_t; /* node id in numa-as-id space */ -typedef signed short cnodeid_t; /* node id in compact-id space */ typedef signed char partid_t; /* partition ID type */ typedef signed short moduleid_t; /* user-visible module number type */ -typedef signed short cmoduleid_t; /* kernel compact module id type */ -typedef unsigned char clusterid_t; /* Clusterid of the cell */ typedef dev_t vertex_hdl_t; /* hardware graph vertex handle */ diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h index 29030cb398ee..1de3bbce8e88 100644 --- a/arch/mips/include/asm/string.h +++ b/arch/mips/include/asm/string.h @@ -10,127 +10,6 @@ #ifndef _ASM_STRING_H #define _ASM_STRING_H - -/* - * Most of the inline functions are rather naive implementations so I just - * didn't bother updating them for 64-bit ... - */ -#ifdef CONFIG_32BIT - -#ifndef IN_STRING_C - -#define __HAVE_ARCH_STRCPY -static __inline__ char *strcpy(char *__dest, __const__ char *__src) -{ - char *__xdest = __dest; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t$1,(%1)\n\t" - "addiu\t%1,1\n\t" - "sb\t$1,(%0)\n\t" - "bnez\t$1,1b\n\t" - "addiu\t%0,1\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__dest), "=r" (__src) - : "0" (__dest), "1" (__src) - : "memory"); - - return __xdest; -} - -#define __HAVE_ARCH_STRNCPY -static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n) -{ - char *__xdest = __dest; - - if (__n == 0) - return __xdest; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t$1,(%1)\n\t" - "subu\t%2,1\n\t" - "sb\t$1,(%0)\n\t" - "beqz\t$1,2f\n\t" - "addiu\t%0,1\n\t" - "bnez\t%2,1b\n\t" - "addiu\t%1,1\n" - "2:\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__dest), "=r" (__src), "=r" (__n) - : "0" (__dest), "1" (__src), "2" (__n) - : "memory"); - - return __xdest; -} - -#define __HAVE_ARCH_STRCMP -static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct) -{ - int __res; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n\t" - "lbu\t%2,(%0)\n" - "1:\tlbu\t$1,(%1)\n\t" - "addiu\t%0,1\n\t" - "bne\t$1,%2,2f\n\t" - "addiu\t%1,1\n\t" - "bnez\t%2,1b\n\t" - "lbu\t%2,(%0)\n\t" -#if defined(CONFIG_CPU_R3000) - "nop\n\t" -#endif - "move\t%2,$1\n" - "2:\tsubu\t%2,$1\n" - "3:\t.set\tat\n\t" - ".set\treorder" - : "=r" (__cs), "=r" (__ct), "=r" (__res) - : "0" (__cs), "1" (__ct)); - - return __res; -} - -#endif /* !defined(IN_STRING_C) */ - -#define __HAVE_ARCH_STRNCMP -static __inline__ int -strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count) -{ - int __res; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t%3,(%0)\n\t" - "beqz\t%2,2f\n\t" - "lbu\t$1,(%1)\n\t" - "subu\t%2,1\n\t" - "bne\t$1,%3,3f\n\t" - "addiu\t%0,1\n\t" - "bnez\t%3,1b\n\t" - "addiu\t%1,1\n" - "2:\n\t" -#if defined(CONFIG_CPU_R3000) - "nop\n\t" -#endif - "move\t%3,$1\n" - "3:\tsubu\t%3,$1\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res) - : "0" (__cs), "1" (__ct), "2" (__count)); - - return __res; -} -#endif /* CONFIG_32BIT */ - #define __HAVE_ARCH_MEMSET extern void *memset(void *__s, int __c, size_t __count); diff --git a/arch/mips/include/asm/sync.h b/arch/mips/include/asm/sync.h new file mode 100644 index 000000000000..7c6a1095f556 --- /dev/null +++ b/arch/mips/include/asm/sync.h @@ -0,0 +1,207 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __MIPS_ASM_SYNC_H__ +#define __MIPS_ASM_SYNC_H__ + +/* + * sync types are defined by the MIPS64 Instruction Set documentation in Volume + * II-A of the MIPS Architecture Reference Manual, which can be found here: + * + * https://www.mips.com/?do-download=the-mips64-instruction-set-v6-06 + * + * Two types of barrier are provided: + * + * 1) Completion barriers, which ensure that a memory operation has actually + * completed & often involve stalling the CPU pipeline to do so. + * + * 2) Ordering barriers, which only ensure that affected memory operations + * won't be reordered in the CPU pipeline in a manner that violates the + * restrictions imposed by the barrier. + * + * Ordering barriers can be more efficient than completion barriers, since: + * + * a) Ordering barriers only require memory access instructions which preceed + * them in program order (older instructions) to reach a point in the + * load/store datapath beyond which reordering is not possible before + * allowing memory access instructions which follow them (younger + * instructions) to be performed. That is, older instructions don't + * actually need to complete - they just need to get far enough that all + * other coherent CPUs will observe their completion before they observe + * the effects of younger instructions. + * + * b) Multiple variants of ordering barrier are provided which allow the + * effects to be restricted to different combinations of older or younger + * loads or stores. By way of example, if we only care that stores older + * than a barrier are observed prior to stores that are younger than a + * barrier & don't care about the ordering of loads then the 'wmb' + * ordering barrier can be used. Limiting the barrier's effects to stores + * allows loads to continue unaffected & potentially allows the CPU to + * make progress faster than if younger loads had to wait for older stores + * to complete. + */ + +/* + * No sync instruction at all; used to allow code to nullify the effect of the + * __SYNC() macro without needing lots of #ifdefery. + */ +#define __SYNC_none -1 + +/* + * A full completion barrier; all memory accesses appearing prior to this sync + * instruction in program order must complete before any memory accesses + * appearing after this sync instruction in program order. + */ +#define __SYNC_full 0x00 + +/* + * For now we use a full completion barrier to implement all sync types, until + * we're satisfied that lightweight ordering barriers defined by MIPSr6 are + * sufficient to uphold our desired memory model. + */ +#define __SYNC_aq __SYNC_full +#define __SYNC_rl __SYNC_full +#define __SYNC_mb __SYNC_full + +/* + * ...except on Cavium Octeon CPUs, which have been using the 'wmb' ordering + * barrier since 2010 & omit 'rmb' barriers because the CPUs don't perform + * speculative reads. + */ +#ifdef CONFIG_CPU_CAVIUM_OCTEON +# define __SYNC_rmb __SYNC_none +# define __SYNC_wmb 0x04 +#else +# define __SYNC_rmb __SYNC_full +# define __SYNC_wmb __SYNC_full +#endif + +/* + * A GINV sync is a little different; it doesn't relate directly to loads or + * stores, but instead causes synchronization of an icache or TLB global + * invalidation operation triggered by the ginvi or ginvt instructions + * respectively. In cases where we need to know that a ginvi or ginvt operation + * has been performed by all coherent CPUs, we must issue a sync instruction of + * this type. Once this instruction graduates all coherent CPUs will have + * observed the invalidation. + */ +#define __SYNC_ginv 0x14 + +/* Trivial; indicate that we always need this sync instruction. */ +#define __SYNC_always (1 << 0) + +/* + * Indicate that we need this sync instruction only on systems with weakly + * ordered memory access. In general this is most MIPS systems, but there are + * exceptions which provide strongly ordered memory. + */ +#ifdef CONFIG_WEAK_ORDERING +# define __SYNC_weak_ordering (1 << 1) +#else +# define __SYNC_weak_ordering 0 +#endif + +/* + * Indicate that we need this sync instruction only on systems where LL/SC + * don't implicitly provide a memory barrier. In general this is most MIPS + * systems. + */ +#ifdef CONFIG_WEAK_REORDERING_BEYOND_LLSC +# define __SYNC_weak_llsc (1 << 2) +#else +# define __SYNC_weak_llsc 0 +#endif + +/* + * Some Loongson 3 CPUs have a bug wherein execution of a memory access (load, + * store or prefetch) in between an LL & SC can cause the SC instruction to + * erroneously succeed, breaking atomicity. Whilst it's unusual to write code + * containing such sequences, this bug bites harder than we might otherwise + * expect due to reordering & speculation: + * + * 1) A memory access appearing prior to the LL in program order may actually + * be executed after the LL - this is the reordering case. + * + * In order to avoid this we need to place a memory barrier (ie. a SYNC + * instruction) prior to every LL instruction, in between it and any earlier + * memory access instructions. + * + * This reordering case is fixed by 3A R2 CPUs, ie. 3A2000 models and later. + * + * 2) If a conditional branch exists between an LL & SC with a target outside + * of the LL-SC loop, for example an exit upon value mismatch in cmpxchg() + * or similar, then misprediction of the branch may allow speculative + * execution of memory accesses from outside of the LL-SC loop. + * + * In order to avoid this we need a memory barrier (ie. a SYNC instruction) + * at each affected branch target. + * + * This case affects all current Loongson 3 CPUs. + * + * The above described cases cause an error in the cache coherence protocol; + * such that the Invalidate of a competing LL-SC goes 'missing' and SC + * erroneously observes its core still has Exclusive state and lets the SC + * proceed. + * + * Therefore the error only occurs on SMP systems. + */ +#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS +# define __SYNC_loongson3_war (1 << 31) +#else +# define __SYNC_loongson3_war 0 +#endif + +/* + * Some Cavium Octeon CPUs suffer from a bug that causes a single wmb ordering + * barrier to be ineffective, requiring the use of 2 in sequence to provide an + * effective barrier as noted by commit 6b07d38aaa52 ("MIPS: Octeon: Use + * optimized memory barrier primitives."). Here we specify that the affected + * sync instructions should be emitted twice. + */ +#ifdef CONFIG_CPU_CAVIUM_OCTEON +# define __SYNC_rpt(type) (1 + (type == __SYNC_wmb)) +#else +# define __SYNC_rpt(type) 1 +#endif + +/* + * The main event. Here we actually emit a sync instruction of a given type, if + * reason is non-zero. + * + * In future we have the option of emitting entries in a fixups-style table + * here that would allow us to opportunistically remove some sync instructions + * when we detect at runtime that we're running on a CPU that doesn't need + * them. + */ +#ifdef CONFIG_CPU_HAS_SYNC +# define ____SYNC(_type, _reason, _else) \ + .if (( _type ) != -1) && ( _reason ); \ + .set push; \ + .set MIPS_ISA_LEVEL_RAW; \ + .rept __SYNC_rpt(_type); \ + sync _type; \ + .endr; \ + .set pop; \ + .else; \ + _else; \ + .endif +#else +# define ____SYNC(_type, _reason, _else) +#endif + +/* + * Preprocessor magic to expand macros used as arguments before we insert them + * into assembly code. + */ +#ifdef __ASSEMBLY__ +# define ___SYNC(type, reason, else) \ + ____SYNC(type, reason, else) +#else +# define ___SYNC(type, reason, else) \ + __stringify(____SYNC(type, reason, else)) +#endif + +#define __SYNC(type, reason) \ + ___SYNC(__SYNC_##type, __SYNC_##reason, ) +#define __SYNC_ELSE(type, reason, else) \ + ___SYNC(__SYNC_##type, __SYNC_##reason, else) + +#endif /* __MIPS_ASM_SYNC_H__ */ diff --git a/arch/mips/include/asm/unroll.h b/arch/mips/include/asm/unroll.h new file mode 100644 index 000000000000..c628747d4ecd --- /dev/null +++ b/arch/mips/include/asm/unroll.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __ASM_UNROLL_H__ +#define __ASM_UNROLL_H__ + +/* + * Explicitly unroll a loop, for use in cases where doing so is performance + * critical. + * + * Ideally we'd rely upon the compiler to provide this but there's no commonly + * available means to do so. For example GCC's "#pragma GCC unroll" + * functionality would be ideal but is only available from GCC 8 onwards. Using + * -funroll-loops is an option but GCC tends to make poor choices when + * compiling our string functions. -funroll-all-loops leads to massive code + * bloat, even if only applied to the string functions. + */ +#define unroll(times, fn, ...) do { \ + extern void bad_unroll(void) \ + __compiletime_error("Unsupported unroll"); \ + \ + /* \ + * We can't unroll if the number of iterations isn't \ + * compile-time constant. Unfortunately GCC versions \ + * up until 4.6 tend to miss obvious constants & cause \ + * this check to fail, even though they go on to \ + * generate reasonable code for the switch statement, \ + * so we skip the sanity check for those compilers. \ + */ \ + BUILD_BUG_ON((CONFIG_GCC_VERSION >= 40700 || \ + CONFIG_CLANG_VERSION >= 80000) && \ + !__builtin_constant_p(times)); \ + \ + switch (times) { \ + case 32: fn(__VA_ARGS__); /* fall through */ \ + case 31: fn(__VA_ARGS__); /* fall through */ \ + case 30: fn(__VA_ARGS__); /* fall through */ \ + case 29: fn(__VA_ARGS__); /* fall through */ \ + case 28: fn(__VA_ARGS__); /* fall through */ \ + case 27: fn(__VA_ARGS__); /* fall through */ \ + case 26: fn(__VA_ARGS__); /* fall through */ \ + case 25: fn(__VA_ARGS__); /* fall through */ \ + case 24: fn(__VA_ARGS__); /* fall through */ \ + case 23: fn(__VA_ARGS__); /* fall through */ \ + case 22: fn(__VA_ARGS__); /* fall through */ \ + case 21: fn(__VA_ARGS__); /* fall through */ \ + case 20: fn(__VA_ARGS__); /* fall through */ \ + case 19: fn(__VA_ARGS__); /* fall through */ \ + case 18: fn(__VA_ARGS__); /* fall through */ \ + case 17: fn(__VA_ARGS__); /* fall through */ \ + case 16: fn(__VA_ARGS__); /* fall through */ \ + case 15: fn(__VA_ARGS__); /* fall through */ \ + case 14: fn(__VA_ARGS__); /* fall through */ \ + case 13: fn(__VA_ARGS__); /* fall through */ \ + case 12: fn(__VA_ARGS__); /* fall through */ \ + case 11: fn(__VA_ARGS__); /* fall through */ \ + case 10: fn(__VA_ARGS__); /* fall through */ \ + case 9: fn(__VA_ARGS__); /* fall through */ \ + case 8: fn(__VA_ARGS__); /* fall through */ \ + case 7: fn(__VA_ARGS__); /* fall through */ \ + case 6: fn(__VA_ARGS__); /* fall through */ \ + case 5: fn(__VA_ARGS__); /* fall through */ \ + case 4: fn(__VA_ARGS__); /* fall through */ \ + case 3: fn(__VA_ARGS__); /* fall through */ \ + case 2: fn(__VA_ARGS__); /* fall through */ \ + case 1: fn(__VA_ARGS__); /* fall through */ \ + case 0: break; \ + \ + default: \ + /* \ + * Either the iteration count is unreasonable \ + * or we need to add more cases above. \ + */ \ + bad_unroll(); \ + break; \ + } \ +} while (0) + +#endif /* __ASM_UNROLL_H__ */ diff --git a/arch/mips/include/asm/vdso/vsyscall.h b/arch/mips/include/asm/vdso/vsyscall.h index 195314732233..00d41b94ba31 100644 --- a/arch/mips/include/asm/vdso/vsyscall.h +++ b/arch/mips/include/asm/vdso/vsyscall.h @@ -28,13 +28,6 @@ int __mips_get_clock_mode(struct timekeeper *tk) } #define __arch_get_clock_mode __mips_get_clock_mode -static __always_inline -int __mips_use_vsyscall(struct vdso_data *vdata) -{ - return (vdata[CS_HRES_COARSE].clock_mode != VDSO_CLOCK_NONE); -} -#define __arch_use_vsyscall __mips_use_vsyscall - /* The asm-generic header needs to be included after the definitions above */ #include <asm-generic/vdso/vsyscall.h> diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 89b07ea8d249..d6e97df51cfb 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -80,7 +80,7 @@ obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o -obj-$(CONFIG_64BIT) += cpu-bugs64.o +obj-$(CONFIG_CPU_R4X00_BUGS64) += r4k-bugs64.o obj-$(CONFIG_I8253) += i8253.o diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index f521cbf934e7..c54332697673 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -608,7 +608,7 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags) if (!(flags & FTLB_EN)) return 1; return 0; - case CPU_LOONGSON3: + case CPU_LOONGSON64: /* Flush ITLB, DTLB, VTLB and FTLB */ write_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB | LOONGSON_DIAG_VTLB | LOONGSON_DIAG_FTLB); @@ -1526,24 +1526,24 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST; c->tlbsize = 64; break; - case PRID_IMP_LOONGSON_64: /* Loongson-2/3 */ + case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */ switch (c->processor_id & PRID_REV_MASK) { case PRID_REV_LOONGSON2E: - c->cputype = CPU_LOONGSON2; + c->cputype = CPU_LOONGSON2EF; __cpu_name[cpu] = "ICT Loongson-2"; set_elf_platform(cpu, "loongson2e"); set_isa(c, MIPS_CPU_ISA_III); c->fpu_msk31 |= FPU_CSR_CONDX; break; case PRID_REV_LOONGSON2F: - c->cputype = CPU_LOONGSON2; + c->cputype = CPU_LOONGSON2EF; __cpu_name[cpu] = "ICT Loongson-2"; set_elf_platform(cpu, "loongson2f"); set_isa(c, MIPS_CPU_ISA_III); c->fpu_msk31 |= FPU_CSR_CONDX; break; case PRID_REV_LOONGSON3A_R1: - c->cputype = CPU_LOONGSON3; + c->cputype = CPU_LOONGSON64; __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3a"); set_isa(c, MIPS_CPU_ISA_M64R1); @@ -1552,7 +1552,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) break; case PRID_REV_LOONGSON3B_R1: case PRID_REV_LOONGSON3B_R2: - c->cputype = CPU_LOONGSON3; + c->cputype = CPU_LOONGSON64; __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3b"); set_isa(c, MIPS_CPU_ISA_M64R1); @@ -1565,12 +1565,13 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) MIPS_CPU_FPU | MIPS_CPU_LLSC | MIPS_CPU_32FPR; c->tlbsize = 64; + set_cpu_asid_mask(c, MIPS_ENTRYHI_ASID); c->writecombine = _CACHE_UNCACHED_ACCELERATED; break; case PRID_IMP_LOONGSON_32: /* Loongson-1 */ decode_configs(c); - c->cputype = CPU_LOONGSON1; + c->cputype = CPU_LOONGSON32; switch (c->processor_id & PRID_REV_MASK) { case PRID_REV_LOONGSON1B: @@ -1903,18 +1904,18 @@ platform: static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_LOONGSON_64: /* Loongson-2/3 */ + case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */ switch (c->processor_id & PRID_REV_MASK) { case PRID_REV_LOONGSON3A_R2_0: case PRID_REV_LOONGSON3A_R2_1: - c->cputype = CPU_LOONGSON3; + c->cputype = CPU_LOONGSON64; __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3a"); set_isa(c, MIPS_CPU_ISA_M64R2); break; case PRID_REV_LOONGSON3A_R3_0: case PRID_REV_LOONGSON3A_R3_1: - c->cputype = CPU_LOONGSON3; + c->cputype = CPU_LOONGSON64; __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3a"); set_isa(c, MIPS_CPU_ISA_M64R2); @@ -1927,6 +1928,17 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2); break; + case PRID_IMP_LOONGSON_64G: + c->cputype = CPU_LOONGSON64; + __cpu_name[cpu] = "ICT Loongson-3"; + set_elf_platform(cpu, "loongson3a"); + set_isa(c, MIPS_CPU_ISA_M64R2); + decode_configs(c); + c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE; + c->writecombine = _CACHE_UNCACHED_ACCELERATED; + c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | + MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2); + break; default: panic("Unknown Loongson Processor ID!"); break; @@ -1965,13 +1977,30 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) break; } + switch (c->processor_id & PRID_COMP_MASK) { /* - * The config0 register in the Xburst CPUs with a processor ID of + * The config0 register in the XBurst CPUs with a processor ID of + * PRID_COMP_INGENIC_D1 has an abandoned huge page tlb mode, this + * mode is not compatible with the MIPS standard, it will cause + * tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S) + * when starting the init process. After chip reset, the default + * is HPTLB mode, Write 0xa9000000 to cp0 register 5 sel 4 to + * switch back to VTLB mode to prevent getting stuck. + */ + case PRID_COMP_INGENIC_D1: + write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS); + break; + /* + * The config0 register in the XBurst CPUs with a processor ID of * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible, * but they don't actually support this ISA. */ - if ((c->processor_id & PRID_COMP_MASK) == PRID_COMP_INGENIC_D0) + case PRID_COMP_INGENIC_D0: c->isa_level &= ~MIPS_CPU_ISA_M32R2; + break; + default: + break; + } } static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index efde27c99414..0a43c9125267 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -18,6 +18,7 @@ #include <asm/fpregdef.h> #include <asm/mipsregs.h> #include <asm/stackframe.h> +#include <asm/sync.h> #include <asm/war.h> #include <asm/thread_info.h> @@ -353,8 +354,9 @@ NESTED(ejtag_debug_handler, PT_SIZE, sp) #ifdef CONFIG_SMP 1: PTR_LA k0, ejtag_debug_buffer_spinlock - ll k0, 0(k0) - bnez k0, 1b + __SYNC(full, loongson3_war) +2: ll k0, 0(k0) + bnez k0, 2b PTR_LA k0, ejtag_debug_buffer_spinlock sc k0, 0(k0) beqz k0, 1b @@ -657,7 +659,7 @@ isrdhwr: .set pop END(handle_ri_rdhwr) -#ifdef CONFIG_64BIT +#ifdef CONFIG_CPU_R4X00_BUGS64 /* A temporary overflow handler used by check_daddi(). */ __INIT diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index eb2afc0b8db1..37f8e78e2869 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -173,13 +173,14 @@ void __init check_wait(void) case CPU_CAVIUM_OCTEON2: case CPU_CAVIUM_OCTEON3: case CPU_XBURST: - case CPU_LOONGSON1: + case CPU_LOONGSON32: case CPU_XLR: case CPU_XLP: cpu_wait = r4k_wait; break; - case CPU_LOONGSON3: - if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON3A_R2_0) + case CPU_LOONGSON64: + if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >= + (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)) cpu_wait = r4k_wait; break; diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index a3e2da8391ea..128fc9999c56 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -1623,7 +1623,7 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) raw_event.cntr_mask = raw_id > 127 ? CNTR_ODD : CNTR_EVEN; break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: raw_event.cntr_mask = raw_id > 127 ? CNTR_ODD : CNTR_EVEN; break; } @@ -1764,12 +1764,12 @@ init_hw_perf_events(void) mipspmu.general_event_map = &mipsxxcore_event_map; mipspmu.cache_event_map = &mipsxxcore_cache_map; break; - case CPU_LOONGSON1: + case CPU_LOONGSON32: mipspmu.name = "mips/loongson1"; mipspmu.general_event_map = &mipsxxcore_event_map; mipspmu.cache_event_map = &mipsxxcore_cache_map; break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: mipspmu.name = "mips/loongson3"; mipspmu.general_event_map = &loongson3_event_map; mipspmu.cache_event_map = &loongson3_cache_map; diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c index a26f40db15d0..9bf60d7d44d3 100644 --- a/arch/mips/kernel/pm-cps.c +++ b/arch/mips/kernel/pm-cps.c @@ -307,7 +307,7 @@ static int cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl, } /* Barrier ensuring previous cache invalidates are complete */ - uasm_i_sync(pp, STYPE_SYNC); + uasm_i_sync(pp, __SYNC_full); uasm_i_ehb(pp); /* Check whether the pipeline stalled due to the FSB being full */ @@ -397,7 +397,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) if (coupled_coherence) { /* Increment ready_count */ - uasm_i_sync(&p, STYPE_SYNC_MB); + uasm_i_sync(&p, __SYNC_mb); uasm_build_label(&l, p, lbl_incready); uasm_i_ll(&p, t1, 0, r_nc_count); uasm_i_addiu(&p, t2, t1, 1); @@ -406,7 +406,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) uasm_i_addiu(&p, t1, t1, 1); /* Barrier ensuring all CPUs see the updated r_nc_count value */ - uasm_i_sync(&p, STYPE_SYNC_MB); + uasm_i_sync(&p, __SYNC_mb); /* * If this is the last VPE to become ready for non-coherence @@ -473,7 +473,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) Index_Writeback_Inv_D, lbl_flushdcache); /* Barrier ensuring previous cache invalidates are complete */ - uasm_i_sync(&p, STYPE_SYNC); + uasm_i_sync(&p, __SYNC_full); uasm_i_ehb(&p); if (mips_cm_revision() < CM_REV_CM3) { @@ -487,7 +487,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) uasm_i_lw(&p, t0, 0, r_pcohctl); /* Barrier to ensure write to coherence control is complete */ - uasm_i_sync(&p, STYPE_SYNC); + uasm_i_sync(&p, __SYNC_full); uasm_i_ehb(&p); } @@ -534,7 +534,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) } /* Barrier to ensure write to CPC command is complete */ - uasm_i_sync(&p, STYPE_SYNC); + uasm_i_sync(&p, __SYNC_full); uasm_i_ehb(&p); } @@ -572,13 +572,13 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) uasm_i_lw(&p, t0, 0, r_pcohctl); /* Barrier to ensure write to coherence control is complete */ - uasm_i_sync(&p, STYPE_SYNC); + uasm_i_sync(&p, __SYNC_full); uasm_i_ehb(&p); if (coupled_coherence && (state == CPS_PM_NC_WAIT)) { /* Decrement ready_count */ uasm_build_label(&l, p, lbl_decready); - uasm_i_sync(&p, STYPE_SYNC_MB); + uasm_i_sync(&p, __SYNC_mb); uasm_i_ll(&p, t1, 0, r_nc_count); uasm_i_addiu(&p, t2, t1, -1); uasm_i_sc(&p, t2, 0, r_nc_count); @@ -586,7 +586,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) uasm_i_andi(&p, v0, t1, (1 << fls(smp_num_siblings)) - 1); /* Barrier ensuring all CPUs see the updated r_nc_count value */ - uasm_i_sync(&p, STYPE_SYNC_MB); + uasm_i_sync(&p, __SYNC_mb); } if (coupled_coherence && (state == CPS_PM_CLOCK_GATED)) { @@ -608,7 +608,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) uasm_build_label(&l, p, lbl_secondary_cont); /* Barrier ensuring all CPUs see the updated r_nc_count value */ - uasm_i_sync(&p, STYPE_SYNC_MB); + uasm_i_sync(&p, __SYNC_mb); } /* The core is coherent, time to return to C code */ diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/r4k-bugs64.c index 6a7afe7ef4d3..1ff19f1ea5ca 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/r4k-bugs64.c @@ -242,7 +242,7 @@ static __init void check_daddi(void) panic(bug64hit, !DADDI_WAR ? daddiwar : nowar); } -int daddiu_bug = IS_ENABLED(CONFIG_CPU_MIPSR6) ? 0 : -1; +int daddiu_bug = -1; static __init void check_daddiu(void) { @@ -312,14 +312,11 @@ static __init void check_daddiu(void) void __init check_bugs64_early(void) { - if (!IS_ENABLED(CONFIG_CPU_MIPSR6)) { - check_mult_sh(); - check_daddiu(); - } + check_mult_sh(); + check_daddiu(); } void __init check_bugs64(void) { - if (!IS_ENABLED(CONFIG_CPU_MIPSR6)) - check_daddi(); + check_daddi(); } diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 5eec13b8d222..c3d4212b5f1d 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -67,7 +67,9 @@ static char __initdata command_line[COMMAND_LINE_SIZE]; char __initdata arcs_cmdline[COMMAND_LINE_SIZE]; #ifdef CONFIG_CMDLINE_BOOL -static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE; +#else +static const char builtin_cmdline[] __initconst = ""; #endif /* @@ -285,7 +287,7 @@ static unsigned long __init init_initrd(void) * Initialize the bootmem allocator. It also setup initrd related data * if needed. */ -#if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_NUMA)) +#if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON64) && defined(CONFIG_NUMA)) static void __init bootmem_init(void) { @@ -538,11 +540,94 @@ static void __init check_kernel_sections_mem(void) } } -#define USE_PROM_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER) -#define USE_DTB_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) -#define EXTEND_WITH_PROM IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) -#define BUILTIN_EXTEND_WITH_PROM \ - IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND) +static void __init bootcmdline_append(const char *s, size_t max) +{ + if (!s[0] || !max) + return; + + if (boot_command_line[0]) + strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); + + strlcat(boot_command_line, s, max); +} + +#ifdef CONFIG_OF_EARLY_FLATTREE + +static int __init bootcmdline_scan_chosen(unsigned long node, const char *uname, + int depth, void *data) +{ + bool *dt_bootargs = data; + const char *p; + int l; + + if (depth != 1 || !data || + (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) + return 0; + + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) { + bootcmdline_append(p, min(l, COMMAND_LINE_SIZE)); + *dt_bootargs = true; + } + + return 1; +} + +#endif /* CONFIG_OF_EARLY_FLATTREE */ + +static void __init bootcmdline_init(char **cmdline_p) +{ + bool dt_bootargs = false; + + /* + * If CMDLINE_OVERRIDE is enabled then initializing the command line is + * trivial - we simply use the built-in command line unconditionally & + * unmodified. + */ + if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) { + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + return; + } + + /* + * If the user specified a built-in command line & + * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is + * prepended to arguments from the bootloader or DT so we'll copy them + * to the start of boot_command_line here. Otherwise, empty + * boot_command_line to undo anything early_init_dt_scan_chosen() did. + */ + if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + else + boot_command_line[0] = 0; + +#ifdef CONFIG_OF_EARLY_FLATTREE + /* + * If we're configured to take boot arguments from DT, look for those + * now. + */ + if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB)) + of_scan_flat_dt(bootcmdline_scan_chosen, &dt_bootargs); +#endif + + /* + * If we didn't get any arguments from DT (regardless of whether that's + * because we weren't configured to look for them, or because we looked + * & found none) then we'll take arguments from the bootloader. + * plat_mem_setup() should have filled arcs_cmdline with arguments from + * the bootloader. + */ + if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs) + bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE); + + /* + * If the user specified a built-in command line & we didn't already + * prepend it, we append it to boot_command_line here. + */ + if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && + !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) + bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE); +} /* * arch_mem_init - initialize memory management subsystem @@ -570,48 +655,12 @@ static void __init arch_mem_init(char **cmdline_p) { extern void plat_mem_setup(void); - /* - * Initialize boot_command_line to an innocuous but non-empty string in - * order to prevent early_init_dt_scan_chosen() from copying - * CONFIG_CMDLINE into it without our knowledge. We handle - * CONFIG_CMDLINE ourselves below & don't want to duplicate its - * content because repeating arguments can be problematic. - */ - strlcpy(boot_command_line, " ", COMMAND_LINE_SIZE); - /* call board setup routine */ plat_mem_setup(); memblock_set_bottom_up(true); -#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE) - strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); -#else - if ((USE_PROM_CMDLINE && arcs_cmdline[0]) || - (USE_DTB_CMDLINE && !boot_command_line[0])) - strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); - - if (EXTEND_WITH_PROM && arcs_cmdline[0]) { - if (boot_command_line[0]) - strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); - strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); - } - -#if defined(CONFIG_CMDLINE_BOOL) - if (builtin_cmdline[0]) { - if (boot_command_line[0]) - strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); - strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); - } - - if (BUILTIN_EXTEND_WITH_PROM && arcs_cmdline[0]) { - if (boot_command_line[0]) - strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); - strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); - } -#endif -#endif + bootcmdline_init(cmdline_p); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); - *cmdline_p = command_line; parse_early_param(); diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index 712c15de6ab9..9058e9dcf080 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -31,7 +31,6 @@ #include <asm/pgtable.h> #include <asm/processor.h> #include <asm/bootinfo.h> -#include <asm/pmon.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/mipsregs.h> diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 3f16f3823031..c333e5788664 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -37,6 +37,7 @@ #include <asm/signal.h> #include <asm/sim.h> #include <asm/shmparam.h> +#include <asm/sync.h> #include <asm/sysmips.h> #include <asm/switch_to.h> @@ -133,12 +134,12 @@ static inline int mips_atomic_set(unsigned long addr, unsigned long new) [efault] "i" (-EFAULT) : "memory"); } else if (cpu_has_llsc) { - loongson_llsc_mb(); __asm__ __volatile__ ( " .set push \n" " .set "MIPS_ISA_ARCH_LEVEL" \n" " li %[err], 0 \n" "1: \n" + " " __SYNC(full, loongson3_war) " \n" user_ll("%[old]", "(%[addr])") " move %[tmp], %[new] \n" "2: \n" diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 342e41de9d64..83f2a437d9e2 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1761,7 +1761,7 @@ static inline void parity_protection_init(void) case CPU_5KC: case CPU_5KE: - case CPU_LOONGSON1: + case CPU_LOONGSON32: write_c0_ecc(0x80000000); back_to_back_c0_hazard(); /* Set the PE bit (bit 31) in the c0_errctl register. */ @@ -2394,7 +2394,7 @@ void __init trap_init(void) else { if (cpu_has_vtag_icache) set_except_vector(EXCCODE_RI, handle_ri_rdhwr_tlbp); - else if (current_cpu_type() == CPU_LOONGSON3) + else if (current_cpu_type() == CPU_LOONGSON64) set_except_vector(EXCCODE_RI, handle_ri_rdhwr_tlbp); else set_except_vector(EXCCODE_RI, handle_ri_rdhwr); diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 33ee0d18fb0a..a5f00ec73ea6 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -10,6 +10,11 @@ */ #define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir) +/* Cavium Octeon should not have a separate PT_NOTE Program Header. */ +#ifndef CONFIG_CAVIUM_OCTEON_SOC +#define EMITS_PT_NOTE +#endif + #include <asm-generic/vmlinux.lds.h> #undef mips @@ -76,16 +81,8 @@ SECTIONS __stop___dbe_table = .; } -#ifdef CONFIG_CAVIUM_OCTEON_SOC -#define NOTES_HEADER -#else /* CONFIG_CAVIUM_OCTEON_SOC */ -#define NOTES_HEADER :note -#endif /* CONFIG_CAVIUM_OCTEON_SOC */ - NOTES :text NOTES_HEADER - .dummy : { *(.dummy) } :text - _sdata = .; /* Start of data section */ - RODATA + RO_DATA(4096) /* writeable */ .data : { /* Data */ diff --git a/arch/mips/kvm/mmu.c b/arch/mips/kvm/mmu.c index 97e538a8c1be..7dad7a293eae 100644 --- a/arch/mips/kvm/mmu.c +++ b/arch/mips/kvm/mmu.c @@ -136,6 +136,7 @@ pgd_t *kvm_pgd_alloc(void) static pte_t *kvm_mips_walk_pgd(pgd_t *pgd, struct kvm_mmu_memory_cache *cache, unsigned long addr) { + p4d_t *p4d; pud_t *pud; pmd_t *pmd; @@ -145,7 +146,8 @@ static pte_t *kvm_mips_walk_pgd(pgd_t *pgd, struct kvm_mmu_memory_cache *cache, BUG(); return NULL; } - pud = pud_offset(pgd, addr); + p4d = p4d_offset(pgd, addr); + pud = pud_offset(p4d, addr); if (pud_none(*pud)) { pmd_t *new_pmd; @@ -204,8 +206,8 @@ static bool kvm_mips_flush_gpa_pmd(pmd_t *pmd, unsigned long start_gpa, { pte_t *pte; unsigned long end = ~0ul; - int i_min = __pmd_offset(start_gpa); - int i_max = __pmd_offset(end_gpa); + int i_min = pmd_index(start_gpa); + int i_max = pmd_index(end_gpa); bool safe_to_remove = (i_min == 0 && i_max == PTRS_PER_PMD - 1); int i; @@ -232,8 +234,8 @@ static bool kvm_mips_flush_gpa_pud(pud_t *pud, unsigned long start_gpa, { pmd_t *pmd; unsigned long end = ~0ul; - int i_min = __pud_offset(start_gpa); - int i_max = __pud_offset(end_gpa); + int i_min = pud_index(start_gpa); + int i_max = pud_index(end_gpa); bool safe_to_remove = (i_min == 0 && i_max == PTRS_PER_PUD - 1); int i; @@ -258,6 +260,7 @@ static bool kvm_mips_flush_gpa_pud(pud_t *pud, unsigned long start_gpa, static bool kvm_mips_flush_gpa_pgd(pgd_t *pgd, unsigned long start_gpa, unsigned long end_gpa) { + p4d_t *p4d; pud_t *pud; unsigned long end = ~0ul; int i_min = pgd_index(start_gpa); @@ -269,7 +272,8 @@ static bool kvm_mips_flush_gpa_pgd(pgd_t *pgd, unsigned long start_gpa, if (!pgd_present(pgd[i])) continue; - pud = pud_offset(pgd + i, 0); + p4d = p4d_offset(pgd, 0); + pud = pud_offset(p4d + i, 0); if (i == i_max) end = end_gpa; @@ -334,8 +338,8 @@ static int kvm_mips_##name##_pmd(pmd_t *pmd, unsigned long start, \ int ret = 0; \ pte_t *pte; \ unsigned long cur_end = ~0ul; \ - int i_min = __pmd_offset(start); \ - int i_max = __pmd_offset(end); \ + int i_min = pmd_index(start); \ + int i_max = pmd_index(end); \ int i; \ \ for (i = i_min; i <= i_max; ++i, start = 0) { \ @@ -357,8 +361,8 @@ static int kvm_mips_##name##_pud(pud_t *pud, unsigned long start, \ int ret = 0; \ pmd_t *pmd; \ unsigned long cur_end = ~0ul; \ - int i_min = __pud_offset(start); \ - int i_max = __pud_offset(end); \ + int i_min = pud_index(start); \ + int i_max = pud_index(end); \ int i; \ \ for (i = i_min; i <= i_max; ++i, start = 0) { \ @@ -378,6 +382,7 @@ static int kvm_mips_##name##_pgd(pgd_t *pgd, unsigned long start, \ unsigned long end) \ { \ int ret = 0; \ + p4d_t *p4d; \ pud_t *pud; \ unsigned long cur_end = ~0ul; \ int i_min = pgd_index(start); \ @@ -388,7 +393,8 @@ static int kvm_mips_##name##_pgd(pgd_t *pgd, unsigned long start, \ if (!pgd_present(pgd[i])) \ continue; \ \ - pud = pud_offset(pgd + i, 0); \ + p4d = p4d_offset(pgd, 0); \ + pud = pud_offset(p4d + i, 0); \ if (i == i_max) \ cur_end = end; \ \ @@ -862,8 +868,8 @@ static bool kvm_mips_flush_gva_pmd(pmd_t *pmd, unsigned long start_gva, { pte_t *pte; unsigned long end = ~0ul; - int i_min = __pmd_offset(start_gva); - int i_max = __pmd_offset(end_gva); + int i_min = pmd_index(start_gva); + int i_max = pmd_index(end_gva); bool safe_to_remove = (i_min == 0 && i_max == PTRS_PER_PMD - 1); int i; @@ -890,8 +896,8 @@ static bool kvm_mips_flush_gva_pud(pud_t *pud, unsigned long start_gva, { pmd_t *pmd; unsigned long end = ~0ul; - int i_min = __pud_offset(start_gva); - int i_max = __pud_offset(end_gva); + int i_min = pud_index(start_gva); + int i_max = pud_index(end_gva); bool safe_to_remove = (i_min == 0 && i_max == PTRS_PER_PUD - 1); int i; @@ -916,6 +922,7 @@ static bool kvm_mips_flush_gva_pud(pud_t *pud, unsigned long start_gva, static bool kvm_mips_flush_gva_pgd(pgd_t *pgd, unsigned long start_gva, unsigned long end_gva) { + p4d_t *p4d; pud_t *pud; unsigned long end = ~0ul; int i_min = pgd_index(start_gva); @@ -927,7 +934,8 @@ static bool kvm_mips_flush_gva_pgd(pgd_t *pgd, unsigned long start_gva, if (!pgd_present(pgd[i])) continue; - pud = pud_offset(pgd + i, 0); + p4d = p4d_offset(pgd, 0); + pud = pud_offset(p4d + i, 0); if (i == i_max) end = end_gva; diff --git a/arch/mips/kvm/trap_emul.c b/arch/mips/kvm/trap_emul.c index 73daa6ad33af..5a11e83dffe6 100644 --- a/arch/mips/kvm/trap_emul.c +++ b/arch/mips/kvm/trap_emul.c @@ -564,6 +564,7 @@ static void kvm_mips_emul_free_gva_pt(pgd_t *pgd) /* Don't free host kernel page tables copied from init_mm.pgd */ const unsigned long end = 0x80000000; unsigned long pgd_va, pud_va, pmd_va; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -576,7 +577,8 @@ static void kvm_mips_emul_free_gva_pt(pgd_t *pgd) pgd_va = (unsigned long)i << PGDIR_SHIFT; if (pgd_va >= end) break; - pud = pud_offset(pgd + i, 0); + p4d = p4d_offset(pgd, 0); + pud = pud_offset(p4d + i, 0); for (j = 0; j < PTRS_PER_PUD; j++) { if (pud_none(pud[j])) continue; diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c index 3b2a1e78a543..116d0bd8b2ae 100644 --- a/arch/mips/lib/bitops.c +++ b/arch/mips/lib/bitops.c @@ -7,6 +7,7 @@ * Copyright (c) 1999, 2000 Silicon Graphics, Inc. */ #include <linux/bitops.h> +#include <linux/bits.h> #include <linux/irqflags.h> #include <linux/export.h> @@ -19,12 +20,11 @@ */ void __mips_set_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); *a |= mask; @@ -41,12 +41,11 @@ EXPORT_SYMBOL(__mips_set_bit); */ void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); *a &= ~mask; @@ -63,12 +62,11 @@ EXPORT_SYMBOL(__mips_clear_bit); */ void __mips_change_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); *a ^= mask; @@ -78,32 +76,6 @@ EXPORT_SYMBOL(__mips_change_bit); /** - * __mips_test_and_set_bit - Set a bit and return its old value. This is - * called by test_and_set_bit() if it cannot find a faster solution. - * @nr: Bit to set - * @addr: Address to count from - */ -int __mips_test_and_set_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; - unsigned long mask; - unsigned long flags; - int res; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - res = (mask & *a) != 0; - *a |= mask; - raw_local_irq_restore(flags); - return res; -} -EXPORT_SYMBOL(__mips_test_and_set_bit); - - -/** * __mips_test_and_set_bit_lock - Set a bit and return its old value. This is * called by test_and_set_bit_lock() if it cannot find a faster solution. * @nr: Bit to set @@ -112,13 +84,12 @@ EXPORT_SYMBOL(__mips_test_and_set_bit); int __mips_test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; int res; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); res = (mask & *a) != 0; @@ -137,13 +108,12 @@ EXPORT_SYMBOL(__mips_test_and_set_bit_lock); */ int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; int res; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); res = (mask & *a) != 0; @@ -162,13 +132,12 @@ EXPORT_SYMBOL(__mips_test_and_clear_bit); */ int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; int res; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); res = (mask & *a) != 0; diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 2ff84f4b1717..fda7b57b826e 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -279,7 +279,7 @@ EXPORT_SYMBOL(csum_partial) #endif /* odd buffer alignment? */ -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON3) +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON64) .set push .set arch=mips32r2 wsbh v1, sum @@ -732,7 +732,7 @@ EXPORT_SYMBOL(csum_partial) addu sum, v1 #endif -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON3) +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON64) .set push .set arch=mips32r2 wsbh v1, sum diff --git a/arch/mips/loongson2ef/Kconfig b/arch/mips/loongson2ef/Kconfig new file mode 100644 index 000000000000..595dd48e1e4d --- /dev/null +++ b/arch/mips/loongson2ef/Kconfig @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0 +if MACH_LOONGSON2EF + +choice + prompt "Machine Type" + +config LEMOTE_FULOONG2E + bool "Lemote Fuloong(2e) mini-PC" + select ARCH_SPARSEMEM_ENABLE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_LOONGSON2E + select DMA_NONCOHERENT + select BOOT_ELF32 + select BOARD_SCACHE + select FORCE_PCI + select I8259 + select ISA + select IRQ_MIPS_CPU + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_EARLY_PRINTK + select USE_GENERIC_EARLY_PRINTK_8250 + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select CPU_HAS_WB + select LOONGSON_MC146818 + help + Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and + an FPGA northbridge + + Lemote Fuloong(2e) mini PC have a VIA686B south bridge. + +config LEMOTE_MACH2F + bool "Lemote Loongson 2F family machines" + select ARCH_SPARSEMEM_ENABLE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select BOARD_SCACHE + select BOOT_ELF32 + select CEVT_R4K if ! MIPS_EXTERNAL_TIMER + select CPU_HAS_WB + select CS5536 + select CSRC_R4K if ! MIPS_EXTERNAL_TIMER + select DMA_NONCOHERENT + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select HAVE_CLK + select FORCE_PCI + select I8259 + select IRQ_MIPS_CPU + select ISA + select SYS_HAS_CPU_LOONGSON2F + select SYS_HAS_EARLY_PRINTK + select USE_GENERIC_EARLY_PRINTK_8250 + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select LOONGSON_MC146818 + help + Lemote Loongson 2F family machines utilize the 2F revision of + Loongson processor and the AMD CS5536 south bridge. + + These family machines include fuloong2f mini PC, yeeloong2f notebook, + LingLoong allinone PC and so forth. + +endchoice + +config CS5536 + bool + +config CS5536_MFGPT + bool "CS5536 MFGPT Timer" + depends on CS5536 && !HIGH_RES_TIMERS + select MIPS_EXTERNAL_TIMER + help + This option enables the mfgpt0 timer of AMD CS5536. With this timer + switched on you can not use high resolution timers. + + If you want to enable the Loongson2 CPUFreq Driver, Please enable + this option at first, otherwise, You will get wrong system time. + + If unsure, say Yes. + +config LOONGSON_UART_BASE + bool + default y + depends on EARLY_PRINTK || SERIAL_8250 + +config LOONGSON_MC146818 + bool + default n + +endif # MACH_LOONGSON2EF diff --git a/arch/mips/loongson2ef/Makefile b/arch/mips/loongson2ef/Makefile new file mode 100644 index 000000000000..d4af1605cc9b --- /dev/null +++ b/arch/mips/loongson2ef/Makefile @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Common code for all Loongson based systems +# + +obj-$(CONFIG_MACH_LOONGSON2EF) += common/ + +# +# Lemote Fuloong mini-PC (Loongson 2E-based) +# + +obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ + +# +# Lemote loongson2f family machines +# + +obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ diff --git a/arch/mips/loongson2ef/Platform b/arch/mips/loongson2ef/Platform new file mode 100644 index 000000000000..3aca42963f35 --- /dev/null +++ b/arch/mips/loongson2ef/Platform @@ -0,0 +1,32 @@ +# +# Loongson Processors' Support +# + +# Only gcc >= 4.4 have Loongson specific support +cflags-$(CONFIG_CPU_LOONGSON2EF) += -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2E) += \ + $(call cc-option,-march=loongson2e,-march=r4600) +cflags-$(CONFIG_CPU_LOONGSON2F) += \ + $(call cc-option,-march=loongson2f,-march=r4600) +# Enable the workarounds for Loongson2f +ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) + else + cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop + endif + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) + else + cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump + endif +endif + +# +# Loongson Machines' Support +# + +platform-$(CONFIG_MACH_LOONGSON2EF) += loongson2ef/ +cflags-$(CONFIG_MACH_LOONGSON2EF) += -I$(srctree)/arch/mips/include/asm/mach-loongson2ef -mno-branch-likely +load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 +load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson2ef/common/Makefile index 684624f61f5a..d5ab3e543ea3 100644 --- a/arch/mips/loongson64/common/Makefile +++ b/arch/mips/loongson2ef/common/Makefile @@ -3,14 +3,13 @@ # Makefile for loongson based machines. # -obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ +obj-y += setup.o init.o env.o time.o reset.o irq.o \ bonito-irq.o mem.o machtype.o platform.o serial.o obj-$(CONFIG_PCI) += pci.o # # Serial port support # -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o obj-$(CONFIG_LOONGSON_MC146818) += rtc.o diff --git a/arch/mips/loongson64/common/bonito-irq.c b/arch/mips/loongson2ef/common/bonito-irq.c index 82352cc25e4c..82352cc25e4c 100644 --- a/arch/mips/loongson64/common/bonito-irq.c +++ b/arch/mips/loongson2ef/common/bonito-irq.c diff --git a/arch/mips/loongson64/common/cs5536/Makefile b/arch/mips/loongson2ef/common/cs5536/Makefile index b32b29661245..b32b29661245 100644 --- a/arch/mips/loongson64/common/cs5536/Makefile +++ b/arch/mips/loongson2ef/common/cs5536/Makefile diff --git a/arch/mips/loongson64/common/cs5536/cs5536_acc.c b/arch/mips/loongson2ef/common/cs5536/cs5536_acc.c index ff50aae72916..ff50aae72916 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_acc.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_acc.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c b/arch/mips/loongson2ef/common/cs5536/cs5536_ehci.c index bd4c39fe6109..bd4c39fe6109 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_ehci.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ide.c b/arch/mips/loongson2ef/common/cs5536/cs5536_ide.c index bb933294b092..bb933294b092 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_ide.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_ide.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_isa.c b/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c index 5ad38f86ee62..5ad38f86ee62 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_isa.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c index 30af1b7c7529..30af1b7c7529 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c b/arch/mips/loongson2ef/common/cs5536/cs5536_ohci.c index 71a52b120317..71a52b120317 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_ohci.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_pci.c b/arch/mips/loongson2ef/common/cs5536/cs5536_pci.c index 202c89b568ba..202c89b568ba 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_pci.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_pci.c diff --git a/arch/mips/loongson2ef/common/env.c b/arch/mips/loongson2ef/common/env.c new file mode 100644 index 000000000000..6f20bdf9b242 --- /dev/null +++ b/arch/mips/loongson2ef/common/env.c @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2003 ICT CAS + * Author: Michael Guo <guoyi@ict.ac.cn> + * + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ +#include <linux/export.h> +#include <asm/bootinfo.h> +#include <asm/fw/fw.h> +#include <loongson.h> + +u32 cpu_clock_freq; +EXPORT_SYMBOL(cpu_clock_freq); + +void __init prom_init_env(void) +{ + /* pmon passes arguments in 32bit pointers */ + unsigned int processor_id; + + cpu_clock_freq = fw_getenvl("cpuclock"); + memsize = fw_getenvl("memsize"); + highmemsize = fw_getenvl("highmemsize"); + + if (memsize == 0) + memsize = 256; + + pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); + + if (cpu_clock_freq == 0) { + processor_id = (¤t_cpu_data)->processor_id; + switch (processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON2E: + cpu_clock_freq = 533080000; + break; + case PRID_REV_LOONGSON2F: + cpu_clock_freq = 797000000; + break; + default: + cpu_clock_freq = 100000000; + break; + } + } + pr_info("CpuClock = %u\n", cpu_clock_freq); +} diff --git a/arch/mips/loongson64/common/init.c b/arch/mips/loongson2ef/common/init.c index 912fe61c4fc7..45512178be77 100644 --- a/arch/mips/loongson64/common/init.c +++ b/arch/mips/loongson2ef/common/init.c @@ -9,6 +9,7 @@ #include <asm/traps.h> #include <asm/smp-ops.h> #include <asm/cacheflush.h> +#include <asm/fw/fw.h> #include <loongson.h> @@ -32,22 +33,17 @@ void __init prom_init(void) ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); #endif - prom_init_cmdline(); + fw_init_cmdline(); + prom_init_machtype(); prom_init_env(); /* init base address of io space */ set_io_port_base((unsigned long) ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); - -#ifdef CONFIG_NUMA - prom_init_numa_memory(); -#else prom_init_memory(); -#endif /*init the uart base address */ prom_init_uart_base(); - register_smp_ops(&loongson3_smp_ops); board_nmi_handler_setup = mips_nmi_setup; } diff --git a/arch/mips/loongson64/common/irq.c b/arch/mips/loongson2ef/common/irq.c index 0ea93c1c0a97..0ea93c1c0a97 100644 --- a/arch/mips/loongson64/common/irq.c +++ b/arch/mips/loongson2ef/common/irq.c diff --git a/arch/mips/loongson64/common/machtype.c b/arch/mips/loongson2ef/common/machtype.c index 4e42d929f1c7..82f6de49f20f 100644 --- a/arch/mips/loongson64/common/machtype.c +++ b/arch/mips/loongson2ef/common/machtype.c @@ -23,7 +23,6 @@ static const char *system_types[] = { [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f", [MACH_LEMOTE_NAS] = "lemote-nas-2f", [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f", - [MACH_LOONGSON_GENERIC] = "generic-loongson-machine", [MACH_LOONGSON_END] = NULL, }; diff --git a/arch/mips/loongson2ef/common/mem.c b/arch/mips/loongson2ef/common/mem.c new file mode 100644 index 000000000000..ae21f1c62baa --- /dev/null +++ b/arch/mips/loongson2ef/common/mem.c @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + */ +#include <linux/fs.h> +#include <linux/fcntl.h> +#include <linux/memblock.h> +#include <linux/mm.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <mem.h> +#include <pci.h> + + +u32 memsize, highmemsize; + +void __init prom_init_memory(void) +{ + add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); + + add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << + 20), BOOT_MEM_RESERVED); + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + { + int bit; + + bit = fls(memsize + highmemsize); + if (bit != ffs(memsize + highmemsize)) + bit += 20; + else + bit = bit + 20 - 1; + + /* set cpu window3 to map CPU to DDR: 2G -> 2G */ + LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, + 0x80000000ul, (1 << bit)); + mmiowb(); + } +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ + +#ifdef CONFIG_64BIT + if (highmemsize > 0) + add_memory_region(LOONGSON_HIGHMEM_START, + highmemsize << 20, BOOT_MEM_RAM); + + add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - + LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); + +#endif /* !CONFIG_64BIT */ +} + +/* override of arch/mips/mm/cache.c: __uncached_access */ +int __uncached_access(struct file *file, unsigned long addr) +{ + if (file->f_flags & O_DSYNC) + return 1; + + return addr >= __pa(high_memory) || + ((addr >= LOONGSON_MMIO_MEM_START) && + (addr < LOONGSON_MMIO_MEM_END)); +} diff --git a/arch/mips/loongson64/common/pci.c b/arch/mips/loongson2ef/common/pci.c index c47bb7bf3aa4..200916925e95 100644 --- a/arch/mips/loongson64/common/pci.c +++ b/arch/mips/loongson2ef/common/pci.c @@ -7,7 +7,6 @@ #include <pci.h> #include <loongson.h> -#include <boot_param.h> static struct resource loongson_pci_mem_resource = { .name = "pci memory space", @@ -81,15 +80,8 @@ static int __init pcibios_init(void) setup_pcimap(); loongson_pci_controller.io_map_base = mips_io_port_base; -#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE - loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; - loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; -#endif register_pci_controller(&loongson_pci_controller); -#ifdef CONFIG_CPU_LOONGSON3 - sbx00_acpi_init(); -#endif return 0; } diff --git a/arch/mips/loongson64/common/platform.c b/arch/mips/loongson2ef/common/platform.c index 0084820cffaa..0084820cffaa 100644 --- a/arch/mips/loongson64/common/platform.c +++ b/arch/mips/loongson2ef/common/platform.c diff --git a/arch/mips/loongson64/common/pm.c b/arch/mips/loongson2ef/common/pm.c index b8aed878d912..11f4cfd581fb 100644 --- a/arch/mips/loongson64/common/pm.c +++ b/arch/mips/loongson2ef/common/pm.c @@ -75,7 +75,7 @@ int __weak wakeup_loongson(void) static void wait_for_wakeup_events(void) { while (!wakeup_loongson()) - LOONGSON_CHIPCFG(0) &= ~0x7; + writel(readl(LOONGSON_CHIPCFG) & ~0x7, LOONGSON_CHIPCFG); } /* @@ -98,15 +98,16 @@ static void loongson_suspend_enter(void) stop_perf_counters(); - cached_cpu_freq = LOONGSON_CHIPCFG(0); + cached_cpu_freq = readl(LOONGSON_CHIPCFG); /* Put CPU into wait mode */ - LOONGSON_CHIPCFG(0) &= ~0x7; + writel(readl(LOONGSON_CHIPCFG) & ~0x7, LOONGSON_CHIPCFG); /* wait for the given events to wakeup cpu from wait mode */ wait_for_wakeup_events(); - LOONGSON_CHIPCFG(0) = cached_cpu_freq; + writel(cached_cpu_freq, LOONGSON_CHIPCFG); + mmiowb(); } diff --git a/arch/mips/loongson64/common/reset.c b/arch/mips/loongson2ef/common/reset.c index ce39e918e4d5..e7c87161ce00 100644 --- a/arch/mips/loongson64/common/reset.c +++ b/arch/mips/loongson2ef/common/reset.c @@ -13,7 +13,6 @@ #include <asm/reboot.h> #include <loongson.h> -#include <boot_param.h> static inline void loongson_reboot(void) { @@ -35,26 +34,15 @@ static inline void loongson_reboot(void) static void loongson_restart(char *command) { -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE /* do preparation for reboot */ mach_prepare_reboot(); /* reboot via jumping to boot base address */ loongson_reboot(); -#else - void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr; - - fw_restart(); - while (1) { - if (cpu_wait) - cpu_wait(); - } -#endif } static void loongson_poweroff(void) { -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE mach_prepare_shutdown(); /* @@ -62,15 +50,6 @@ static void loongson_poweroff(void) * a generic delay loop, machine_hang(), so simply return. */ return; -#else - void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr; - - fw_poweroff(); - while (1) { - if (cpu_wait) - cpu_wait(); - } -#endif } static void loongson_halt(void) diff --git a/arch/mips/loongson64/common/rtc.c b/arch/mips/loongson2ef/common/rtc.c index 8d7628c0f513..8d7628c0f513 100644 --- a/arch/mips/loongson64/common/rtc.c +++ b/arch/mips/loongson2ef/common/rtc.c diff --git a/arch/mips/loongson2ef/common/serial.c b/arch/mips/loongson2ef/common/serial.c new file mode 100644 index 000000000000..ac4f6e3ebc3e --- /dev/null +++ b/arch/mips/loongson2ef/common/serial.c @@ -0,0 +1,86 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Yan hua (yanhua@lemote.com) + * Author: Wu Zhangjin (wuzhangjin@gmail.com) + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/serial_8250.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <machine.h> + +#define PORT(int, clk) \ +{ \ + .irq = int, \ + .uartclk = clk, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +#define PORT_M(int, clk) \ +{ \ + .irq = MIPS_CPU_IRQ_BASE + (int), \ + .uartclk = clk, \ + .iotype = UPIO_MEM, \ + .membase = (void __iomem *)NULL, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +static struct plat_serial8250_port uart8250_data[MACH_LOONGSON_END + 1] = { + [MACH_LOONGSON_UNKNOWN] = {}, + [MACH_LEMOTE_FL2E] = PORT(4, 1843200), + [MACH_LEMOTE_FL2F] = PORT(3, 1843200), + [MACH_LEMOTE_ML2F7] = PORT_M(3, 3686400), + [MACH_LEMOTE_YL2F89] = PORT_M(3, 3686400), + [MACH_DEXXON_GDIUM2F10] = PORT_M(3, 3686400), + [MACH_LEMOTE_NAS] = PORT_M(3, 3686400), + [MACH_LEMOTE_LL2F] = PORT(3, 1843200), + [MACH_LOONGSON_END] = {}, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, +}; + +static int __init serial_init(void) +{ + unsigned char iotype; + + iotype = uart8250_data[mips_machtype].iotype; + + if (UPIO_MEM == iotype) { + uart8250_data[mips_machtype].mapbase = + loongson_uart_base; + uart8250_data[mips_machtype].membase = + (void __iomem *)_loongson_uart_base; + } + else if (UPIO_PORT == iotype) + uart8250_data[mips_machtype].iobase = + loongson_uart_base - LOONGSON_PCIIO_BASE; + + memset(&uart8250_data[mips_machtype + 1], 0, + sizeof(struct plat_serial8250_port)); + uart8250_device.dev.platform_data = &uart8250_data[mips_machtype]; + + return platform_device_register(&uart8250_device); +} +module_init(serial_init); + +static void __exit serial_exit(void) +{ + platform_device_unregister(&uart8250_device); +} +module_exit(serial_exit); diff --git a/arch/mips/loongson64/common/setup.c b/arch/mips/loongson2ef/common/setup.c index bc2da4c140c4..4fd27f4f90ed 100644 --- a/arch/mips/loongson64/common/setup.c +++ b/arch/mips/loongson2ef/common/setup.c @@ -11,11 +11,6 @@ #include <loongson.h> -#ifdef CONFIG_VT -#include <linux/console.h> -#include <linux/screen_info.h> -#endif - static void wbflush_loongson(void) { asm(".set\tpush\n\t" @@ -32,20 +27,4 @@ EXPORT_SYMBOL(__wbflush); void __init plat_mem_setup(void) { -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; - - screen_info = (struct screen_info) { - .orig_x = 0, - .orig_y = 25, - .orig_video_cols = 80, - .orig_video_lines = 25, - .orig_video_isVGA = VIDEO_TYPE_VGAC, - .orig_video_points = 16, - }; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif } diff --git a/arch/mips/loongson64/common/time.c b/arch/mips/loongson2ef/common/time.c index e78760ce475b..585741af42a9 100644 --- a/arch/mips/loongson64/common/time.c +++ b/arch/mips/loongson2ef/common/time.c @@ -18,11 +18,7 @@ void __init plat_time_init(void) /* setup mips r4k timer */ mips_hpt_frequency = cpu_clock_freq / 2; -#ifdef CONFIG_RS780_HPET - setup_hpet_timer(); -#else setup_mfgpt0_timer(); -#endif } void read_persistent_clock64(struct timespec64 *ts) diff --git a/arch/mips/loongson64/common/uart_base.c b/arch/mips/loongson2ef/common/uart_base.c index e88d937f10fe..522bea6ad7b0 100644 --- a/arch/mips/loongson64/common/uart_base.c +++ b/arch/mips/loongson2ef/common/uart_base.c @@ -6,13 +6,14 @@ #include <linux/export.h> #include <asm/bootinfo.h> +#include <asm/setup.h> #include <loongson.h> /* raw */ -unsigned long loongson_uart_base[MAX_UARTS] = {}; +unsigned long loongson_uart_base; /* ioremapped */ -unsigned long _loongson_uart_base[MAX_UARTS] = {}; +unsigned long _loongson_uart_base; EXPORT_SYMBOL(loongson_uart_base); EXPORT_SYMBOL(_loongson_uart_base); @@ -20,16 +21,12 @@ EXPORT_SYMBOL(_loongson_uart_base); void prom_init_loongson_uart_base(void) { switch (mips_machtype) { - case MACH_LOONGSON_GENERIC: - /* The CPU provided serial port (CPU) */ - loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0; - break; case MACH_LEMOTE_FL2E: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8; + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x3f8; break; case MACH_LEMOTE_FL2F: case MACH_LEMOTE_LL2F: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8; + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x2f8; break; case MACH_LEMOTE_ML2F7: case MACH_LEMOTE_YL2F89: @@ -37,10 +34,10 @@ void prom_init_loongson_uart_base(void) case MACH_LEMOTE_NAS: default: /* The CPU provided serial port (LPC) */ - loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8; + loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8; break; } - _loongson_uart_base[0] = - (unsigned long)ioremap_nocache(loongson_uart_base[0], 8); + _loongson_uart_base = TO_UNCAC(loongson_uart_base); + setup_8250_early_printk_port(_loongson_uart_base, 0, 1024); } diff --git a/arch/mips/loongson64/fuloong-2e/Makefile b/arch/mips/loongson2ef/fuloong-2e/Makefile index bb58edb3bea7..bb58edb3bea7 100644 --- a/arch/mips/loongson64/fuloong-2e/Makefile +++ b/arch/mips/loongson2ef/fuloong-2e/Makefile diff --git a/arch/mips/loongson64/fuloong-2e/dma.c b/arch/mips/loongson2ef/fuloong-2e/dma.c index e122292bf666..e122292bf666 100644 --- a/arch/mips/loongson64/fuloong-2e/dma.c +++ b/arch/mips/loongson2ef/fuloong-2e/dma.c diff --git a/arch/mips/loongson64/fuloong-2e/irq.c b/arch/mips/loongson2ef/fuloong-2e/irq.c index 32278e7bf85c..32278e7bf85c 100644 --- a/arch/mips/loongson64/fuloong-2e/irq.c +++ b/arch/mips/loongson2ef/fuloong-2e/irq.c diff --git a/arch/mips/loongson64/fuloong-2e/reset.c b/arch/mips/loongson2ef/fuloong-2e/reset.c index 8273de1cf4bb..8273de1cf4bb 100644 --- a/arch/mips/loongson64/fuloong-2e/reset.c +++ b/arch/mips/loongson2ef/fuloong-2e/reset.c diff --git a/arch/mips/loongson64/lemote-2f/Makefile b/arch/mips/loongson2ef/lemote-2f/Makefile index 881a0ec06d1f..881a0ec06d1f 100644 --- a/arch/mips/loongson64/lemote-2f/Makefile +++ b/arch/mips/loongson2ef/lemote-2f/Makefile diff --git a/arch/mips/loongson64/lemote-2f/clock.c b/arch/mips/loongson2ef/lemote-2f/clock.c index 8281334df9c8..414f282c8ab5 100644 --- a/arch/mips/loongson64/lemote-2f/clock.c +++ b/arch/mips/loongson2ef/lemote-2f/clock.c @@ -15,7 +15,7 @@ #include <linux/spinlock.h> #include <asm/clock.h> -#include <asm/mach-loongson64/loongson.h> +#include <asm/mach-loongson2ef/loongson.h> static LIST_HEAD(clock_list); static DEFINE_SPINLOCK(clock_lock); @@ -118,9 +118,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate) clk->rate = rate; - regval = LOONGSON_CHIPCFG(0); + regval = readl(LOONGSON_CHIPCFG); regval = (regval & ~0x7) | (pos->driver_data - 1); - LOONGSON_CHIPCFG(0) = regval; + writel(regval, LOONGSON_CHIPCFG); return ret; } diff --git a/arch/mips/loongson64/lemote-2f/dma.c b/arch/mips/loongson2ef/lemote-2f/dma.c index abf0e39d7e46..abf0e39d7e46 100644 --- a/arch/mips/loongson64/lemote-2f/dma.c +++ b/arch/mips/loongson2ef/lemote-2f/dma.c diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c b/arch/mips/loongson2ef/lemote-2f/ec_kb3310b.c index d138220e96a2..d138220e96a2 100644 --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c +++ b/arch/mips/loongson2ef/lemote-2f/ec_kb3310b.c diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h b/arch/mips/loongson2ef/lemote-2f/ec_kb3310b.h index aecdbc9c875a..aecdbc9c875a 100644 --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h +++ b/arch/mips/loongson2ef/lemote-2f/ec_kb3310b.h diff --git a/arch/mips/loongson64/lemote-2f/irq.c b/arch/mips/loongson2ef/lemote-2f/irq.c index c58a044c6c07..c58a044c6c07 100644 --- a/arch/mips/loongson64/lemote-2f/irq.c +++ b/arch/mips/loongson2ef/lemote-2f/irq.c diff --git a/arch/mips/loongson64/lemote-2f/machtype.c b/arch/mips/loongson2ef/lemote-2f/machtype.c index 9462a3ab57be..9462a3ab57be 100644 --- a/arch/mips/loongson64/lemote-2f/machtype.c +++ b/arch/mips/loongson2ef/lemote-2f/machtype.c diff --git a/arch/mips/loongson64/lemote-2f/pm.c b/arch/mips/loongson2ef/lemote-2f/pm.c index 3d0027229e3c..3d0027229e3c 100644 --- a/arch/mips/loongson64/lemote-2f/pm.c +++ b/arch/mips/loongson2ef/lemote-2f/pm.c diff --git a/arch/mips/loongson64/lemote-2f/reset.c b/arch/mips/loongson2ef/lemote-2f/reset.c index 0db0934302ea..197dae4ffd23 100644 --- a/arch/mips/loongson64/lemote-2f/reset.c +++ b/arch/mips/loongson2ef/lemote-2f/reset.c @@ -24,7 +24,7 @@ static void reset_cpu(void) * reset cpu to full speed, this is needed when enabling cpu frequency * scalling */ - LOONGSON_CHIPCFG(0) |= 0x7; + writel(readl(LOONGSON_CHIPCFG) | 0x7, LOONGSON_CHIPCFG); } /* reset support for fuloong2f */ diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig index 6dacc1438906..e27879b4813b 100644 --- a/arch/mips/loongson32/Kconfig +++ b/arch/mips/loongson32/Kconfig @@ -38,7 +38,7 @@ endchoice menuconfig CEVT_CSRC_LS1X bool "Use PWM Timer for clockevent/clocksource" select MIPS_EXTERNAL_TIMER - depends on CPU_LOONGSON1 + depends on CPU_LOONGSON32 help This option changes the default clockevent/clocksource to PWM Timer, and is required by Loongson1 CPUFreq support. diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform index 333215593092..7f8e342f1ef5 100644 --- a/arch/mips/loongson32/Platform +++ b/arch/mips/loongson32/Platform @@ -1,4 +1,4 @@ -cflags-$(CONFIG_CPU_LOONGSON1) += -march=mips32r2 -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON32) += -march=mips32r2 -Wa,--trap platform-$(CONFIG_MACH_LOONGSON32) += loongson32/ cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32 -load-$(CONFIG_CPU_LOONGSON1) += 0xffffffff80200000 +load-$(CONFIG_CPU_LOONGSON32) += 0xffffffff80200000 diff --git a/arch/mips/loongson32/common/prom.c b/arch/mips/loongson32/common/prom.c index c4e043ee53ff..73dd25142484 100644 --- a/arch/mips/loongson32/common/prom.c +++ b/arch/mips/loongson32/common/prom.c @@ -5,63 +5,25 @@ * Modified from arch/mips/pnx833x/common/prom.c. */ +#include <linux/io.h> +#include <linux/init.h> #include <linux/serial_reg.h> #include <asm/bootinfo.h> +#include <asm/fw/fw.h> #include <loongson1.h> -#include <prom.h> -int prom_argc; -char **prom_argv, **prom_envp; -unsigned long memsize, highmemsize; - -char *prom_getenv(char *envname) -{ - char **env = prom_envp; - int i; - - i = strlen(envname); - - while (*env) { - if (strncmp(envname, *env, i) == 0 && *(*env + i) == '=') - return *env + i + 1; - env++; - } - - return 0; -} - -static inline unsigned long env_or_default(char *env, unsigned long dfl) -{ - char *str = prom_getenv(env); - return str ? simple_strtol(str, 0, 0) : dfl; -} - -void __init prom_init_cmdline(void) -{ - char *c = &(arcs_cmdline[0]); - int i; - - for (i = 1; i < prom_argc; i++) { - strcpy(c, prom_argv[i]); - c += strlen(prom_argv[i]); - if (i < prom_argc - 1) - *c++ = ' '; - } - *c = 0; -} +unsigned long memsize; void __init prom_init(void) { void __iomem *uart_base; - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - prom_init_cmdline(); + fw_init_cmdline(); - memsize = env_or_default("memsize", DEFAULT_MEMSIZE); - highmemsize = env_or_default("highmemsize", 0x0); + memsize = fw_getenvl("memsize"); + if(!memsize) + memsize = DEFAULT_MEMSIZE; if (strstr(arcs_cmdline, "console=ttyS3")) uart_base = ioremap_nocache(LS1X_UART3_BASE, 0x0f); @@ -77,3 +39,8 @@ void __init prom_init(void) void __init prom_free_prom_memory(void) { } + +void __init plat_mem_setup(void) +{ + add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); +} diff --git a/arch/mips/loongson32/common/setup.c b/arch/mips/loongson32/common/setup.c index 8b03e18fc4d8..4733fe037176 100644 --- a/arch/mips/loongson32/common/setup.c +++ b/arch/mips/loongson32/common/setup.c @@ -3,15 +3,12 @@ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> */ +#include <linux/io.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/cpu-info.h> #include <asm/bootinfo.h> -#include <prom.h> - -void __init plat_mem_setup(void) -{ - add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); -} - const char *get_system_type(void) { unsigned int processor_id = (¤t_cpu_data)->processor_id; diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index 4c14a11525f4..48b29c198acf 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -1,119 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 if MACH_LOONGSON64 -choice - prompt "Machine Type" - -config LEMOTE_FULOONG2E - bool "Lemote Fuloong(2e) mini-PC" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2E - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HAVE_PCI - select I8259 - select ISA - select IRQ_MIPS_CPU - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB - select LOONGSON_MC146818 - help - Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge - - Lemote Fuloong(2e) mini PC have a VIA686B south bridge. - -config LEMOTE_MACH2F - bool "Lemote Loongson 2F family machines" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select BOARD_SCACHE - select BOOT_ELF32 - select CEVT_R4K if ! MIPS_EXTERNAL_TIMER - select CPU_HAS_WB - select CS5536 - select CSRC_R4K if ! MIPS_EXTERNAL_TIMER - select DMA_NONCOHERENT - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select HAVE_CLK - select HAVE_PCI - select I8259 - select IRQ_MIPS_CPU - select ISA - select SYS_HAS_CPU_LOONGSON2F - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - help - Lemote Loongson 2F family machines utilize the 2F revision of - Loongson processor and the AMD CS5536 south bridge. - - These family machines include fuloong2f mini PC, yeeloong2f notebook, - LingLoong allinone PC and so forth. - -config LOONGSON_MACH3X - bool "Generic Loongson 3 family machines" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select BOOT_ELF32 - select BOARD_SCACHE - select CSRC_R4K - select CEVT_R4K - select CPU_HAS_WB - select FORCE_PCI - select ISA - select I8259 - select IRQ_MIPS_CPU - select NR_CPUS_DEFAULT_4 - select SYS_HAS_CPU_LOONGSON3 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_SMP - select SYS_SUPPORTS_HOTPLUG_CPU - select SYS_SUPPORTS_NUMA - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - select ZONE_DMA32 - select LEFI_FIRMWARE_INTERFACE - help - Generic Loongson 3 family machines utilize the 3A/3B revision - of Loongson processor and RS780/SBX00 chipset. -endchoice - -config CS5536 - bool - -config CS5536_MFGPT - bool "CS5536 MFGPT Timer" - depends on CS5536 && !HIGH_RES_TIMERS - select MIPS_EXTERNAL_TIMER - help - This option enables the mfgpt0 timer of AMD CS5536. With this timer - switched on you can not use high resolution timers. - - If you want to enable the Loongson2 CPUFreq Driver, Please enable - this option at first, otherwise, You will get wrong system time. - - If unsure, say Yes. - config RS780_HPET bool "RS780/SBX00 HPET Timer" - depends on LOONGSON_MACH3X + depends on MACH_LOONGSON64 select MIPS_EXTERNAL_TIMER help This option enables the hpet timer of AMD RS780/SBX00. @@ -123,16 +13,9 @@ config RS780_HPET If unsure, say Yes. -config LOONGSON_UART_BASE - bool - default y - depends on EARLY_PRINTK || SERIAL_8250 config LOONGSON_MC146818 bool default n -config LEFI_FIRMWARE_INTERFACE - bool - endif # MACH_LOONGSON64 diff --git a/arch/mips/loongson64/Makefile b/arch/mips/loongson64/Makefile index 1a5df773707d..7821891bc5d0 100644 --- a/arch/mips/loongson64/Makefile +++ b/arch/mips/loongson64/Makefile @@ -1,24 +1,13 @@ # SPDX-License-Identifier: GPL-2.0-only # -# Common code for all Loongson based systems +# Makefile for Loongson-3 family machines # +obj-$(CONFIG_MACH_LOONGSON64) += irq.o cop2-ex.o platform.o acpi_init.o dma.o \ + setup.o init.o env.o time.o reset.o \ -obj-$(CONFIG_MACH_LOONGSON64) += common/ - -# -# Lemote Fuloong mini-PC (Loongson 2E-based) -# - -obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ - -# -# Lemote loongson2f family machines -# - -obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ - -# -# All Loongson-3 family machines -# - -obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/ +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_NUMA) += numa.o +obj-$(CONFIG_RS780_HPET) += hpet.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_LOONGSON_MC146818) += rtc.o +obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform index 9f79908f5063..d5eb94c9edb4 100644 --- a/arch/mips/loongson64/Platform +++ b/arch/mips/loongson64/Platform @@ -2,32 +2,13 @@ # Loongson Processors' Support # -# Only gcc >= 4.4 have Loongson specific support -cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap -cflags-$(CONFIG_CPU_LOONGSON2E) += \ - $(call cc-option,-march=loongson2e,-march=r4600) -cflags-$(CONFIG_CPU_LOONGSON2F) += \ - $(call cc-option,-march=loongson2f,-march=r4600) -# Enable the workarounds for Loongson2f -ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS - ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) - $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) - else - cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop - endif - ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) - $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) - else - cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump - endif -endif -cflags-$(CONFIG_CPU_LOONGSON3) += -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap # # Some versions of binutils, not currently mainline as of 2019/02/04, support # an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction -# to work around a CPU bug (see loongson_llsc_mb() in asm/barrier.h for a +# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a # description). # # We disable this in order to prevent the assembler meddling with the @@ -44,7 +25,7 @@ cflags-$(CONFIG_CPU_LOONGSON3) += -Wa,--trap # binutils does not merge support for the flag then we can revisit & remove # this later - for now it ensures vendor toolchains don't cause problems. # -cflags-$(CONFIG_CPU_LOONGSON3) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) +cflags-$(CONFIG_CPU_LOONGSON64) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) # # binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a @@ -55,14 +36,14 @@ cflags-$(CONFIG_CPU_LOONGSON3) += $(call as-option,-Wa$(comma)-mno-fix-loongson3 # ifeq ($(call cc-ifversion, -ge, 0409, y), y) ifeq ($(call ld-ifversion, -ge, 225000000, y), y) - cflags-$(CONFIG_CPU_LOONGSON3) += \ + cflags-$(CONFIG_CPU_LOONGSON64) += \ $(call cc-option,-march=loongson3a -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) else - cflags-$(CONFIG_CPU_LOONGSON3) += \ + cflags-$(CONFIG_CPU_LOONGSON64) += \ $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) endif else - cflags-$(CONFIG_CPU_LOONGSON3) += \ + cflags-$(CONFIG_CPU_LOONGSON64) += \ $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) endif @@ -76,6 +57,4 @@ cflags-y += $(call cc-option,-mno-loongson-mmi) platform-$(CONFIG_MACH_LOONGSON64) += loongson64/ cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely -load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 -load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 -load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000 +load-$(CONFIG_CPU_LOONGSON64) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/loongson-3/acpi_init.c b/arch/mips/loongson64/acpi_init.c index 8d7c119ddf91..8d7c119ddf91 100644 --- a/arch/mips/loongson64/loongson-3/acpi_init.c +++ b/arch/mips/loongson64/acpi_init.c diff --git a/arch/mips/loongson64/common/cmdline.c b/arch/mips/loongson64/common/cmdline.c deleted file mode 100644 index a735460682cf..000000000000 --- a/arch/mips/loongson64/common/cmdline.c +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Based on Ocelot Linux port, which is - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright 2003 ICT CAS - * Author: Michael Guo <guoyi@ict.ac.cn> - * - * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * - * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ -#include <asm/bootinfo.h> - -#include <loongson.h> - -void __init prom_init_cmdline(void) -{ - int prom_argc; - /* pmon passes arguments in 32bit pointers */ - int *_prom_argv; - int i; - long l; - - /* firmware arguments are initialized in head.S */ - prom_argc = fw_arg0; - _prom_argv = (int *)fw_arg1; - - /* arg[0] is "g", the rest is boot parameters */ - arcs_cmdline[0] = '\0'; - for (i = 1; i < prom_argc; i++) { - l = (long)_prom_argv[i]; - if (strlen(arcs_cmdline) + strlen(((char *)l) + 1) - >= sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, ((char *)l)); - strcat(arcs_cmdline, " "); - } - - prom_init_machtype(); -} diff --git a/arch/mips/loongson64/common/early_printk.c b/arch/mips/loongson64/common/early_printk.c deleted file mode 100644 index 5e2a151aa30c..000000000000 --- a/arch/mips/loongson64/common/early_printk.c +++ /dev/null @@ -1,38 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* early printk support - * - * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> - * Copyright (c) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzhangjin@gmail.com - */ -#include <linux/serial_reg.h> -#include <asm/setup.h> - -#include <loongson.h> - -#define PORT(base, offset) (u8 *)(base + offset) - -static inline unsigned int serial_in(unsigned char *base, int offset) -{ - return readb(PORT(base, offset)); -} - -static inline void serial_out(unsigned char *base, int offset, int value) -{ - writeb(value, PORT(base, offset)); -} - -void prom_putchar(char c) -{ - int timeout; - unsigned char *uart_base; - - uart_base = (unsigned char *)_loongson_uart_base[0]; - timeout = 1024; - - while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && - (timeout-- > 0)) - ; - - serial_out(uart_base, UART_TX, c); -} diff --git a/arch/mips/loongson64/common/mem.c b/arch/mips/loongson64/common/mem.c deleted file mode 100644 index 4254ac4ec616..000000000000 --- a/arch/mips/loongson64/common/mem.c +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - */ -#include <linux/fs.h> -#include <linux/fcntl.h> -#include <linux/memblock.h> -#include <linux/mm.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <boot_param.h> -#include <mem.h> -#include <pci.h> - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - -u32 memsize, highmemsize; - -void __init prom_init_memory(void) -{ - add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); - - add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << - 20), BOOT_MEM_RESERVED); - -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - { - int bit; - - bit = fls(memsize + highmemsize); - if (bit != ffs(memsize + highmemsize)) - bit += 20; - else - bit = bit + 20 - 1; - - /* set cpu window3 to map CPU to DDR: 2G -> 2G */ - LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, - 0x80000000ul, (1 << bit)); - mmiowb(); - } -#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ - -#ifdef CONFIG_64BIT - if (highmemsize > 0) - add_memory_region(LOONGSON_HIGHMEM_START, - highmemsize << 20, BOOT_MEM_RAM); - - add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - - LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); - -#endif /* !CONFIG_64BIT */ -} - -#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -void __init prom_init_memory(void) -{ - int i; - u32 node_id; - u32 mem_type; - - /* parse memory information */ - for (i = 0; i < loongson_memmap->nr_map; i++) { - node_id = loongson_memmap->map[i].node_id; - mem_type = loongson_memmap->map[i].mem_type; - - if (node_id != 0) - continue; - - switch (mem_type) { - case SYSTEM_RAM_LOW: - memblock_add(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - case SYSTEM_RAM_HIGH: - memblock_add(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - case SYSTEM_RAM_RESERVED: - memblock_reserve(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - } - } -} - -#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -/* override of arch/mips/mm/cache.c: __uncached_access */ -int __uncached_access(struct file *file, unsigned long addr) -{ - if (file->f_flags & O_DSYNC) - return 1; - - return addr >= __pa(high_memory) || - ((addr >= LOONGSON_MMIO_MEM_START) && - (addr < LOONGSON_MMIO_MEM_END)); -} - -#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED - -#include <linux/pci.h> -#include <linux/sched.h> -#include <asm/current.h> - -static unsigned long uca_start, uca_end; - -pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot) -{ - unsigned long offset = pfn << PAGE_SHIFT; - unsigned long end = offset + size; - - if (__uncached_access(file, offset)) { - if (uca_start && (offset >= uca_start) && - (end <= uca_end)) - return __pgprot((pgprot_val(vma_prot) & - ~_CACHE_MASK) | - _CACHE_UNCACHED_ACCELERATED); - else - return pgprot_noncached(vma_prot); - } - return vma_prot; -} - -static int __init find_vga_mem_init(void) -{ - struct pci_dev *dev = 0; - struct resource *r; - int idx; - - if (uca_start) - return 0; - - for_each_pci_dev(dev) { - if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) { - for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { - r = &dev->resource[idx]; - if (!r->start && r->end) - continue; - if (r->flags & IORESOURCE_IO) - continue; - if (r->flags & IORESOURCE_MEM) { - uca_start = r->start; - uca_end = r->end; - return 0; - } - } - } - } - - return 0; -} - -late_initcall(find_vga_mem_init); -#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */ diff --git a/arch/mips/loongson64/common/serial.c b/arch/mips/loongson64/common/serial.c deleted file mode 100644 index 98c3a7feb10f..000000000000 --- a/arch/mips/loongson64/common/serial.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Yan hua (yanhua@lemote.com) - * Author: Wu Zhangjin (wuzhangjin@gmail.com) - */ - -#include <linux/io.h> -#include <linux/module.h> -#include <linux/serial_8250.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <machine.h> - -#define PORT(int, clk) \ -{ \ - .irq = int, \ - .uartclk = clk, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -#define PORT_M(int, clk) \ -{ \ - .irq = MIPS_CPU_IRQ_BASE + (int), \ - .uartclk = clk, \ - .iotype = UPIO_MEM, \ - .membase = (void __iomem *)NULL, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = { - [MACH_LOONGSON_UNKNOWN] = {}, - [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} }, - [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} }, - [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} }, - [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} }, - [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} }, - [MACH_LOONGSON_END] = {}, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, -}; - -static int __init serial_init(void) -{ - int i; - unsigned char iotype; - - iotype = uart8250_data[mips_machtype][0].iotype; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][0].mapbase = - loongson_uart_base[0]; - uart8250_data[mips_machtype][0].membase = - (void __iomem *)_loongson_uart_base[0]; - } - else if (UPIO_PORT == iotype) - uart8250_data[mips_machtype][0].iobase = - loongson_uart_base[0] - LOONGSON_PCIIO_BASE; - - if (loongson_sysconf.uarts[0].uartclk) - uart8250_data[mips_machtype][0].uartclk = - loongson_sysconf.uarts[0].uartclk; - - for (i = 1; i < loongson_sysconf.nr_uarts; i++) { - iotype = loongson_sysconf.uarts[i].iotype; - uart8250_data[mips_machtype][i].iotype = iotype; - loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][i].irq = - MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].mapbase = - loongson_uart_base[i]; - uart8250_data[mips_machtype][i].membase = - ioremap_nocache(loongson_uart_base[i], 8); - } else if (UPIO_PORT == iotype) { - uart8250_data[mips_machtype][i].irq = - loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].iobase = - loongson_uart_base[i] - LOONGSON_PCIIO_BASE; - } - - uart8250_data[mips_machtype][i].uartclk = - loongson_sysconf.uarts[i].uartclk; - uart8250_data[mips_machtype][i].flags = - UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - } - - memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts], - 0, sizeof(struct plat_serial8250_port)); - uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; - - return platform_device_register(&uart8250_device); -} -module_init(serial_init); - -static void __exit serial_exit(void) -{ - platform_device_unregister(&uart8250_device); -} -module_exit(serial_exit); diff --git a/arch/mips/loongson64/loongson-3/cop2-ex.c b/arch/mips/loongson64/cop2-ex.c index 9efdfe430ff0..9efdfe430ff0 100644 --- a/arch/mips/loongson64/loongson-3/cop2-ex.c +++ b/arch/mips/loongson64/cop2-ex.c diff --git a/arch/mips/loongson64/loongson-3/dma.c b/arch/mips/loongson64/dma.c index 5e86635f71db..5e86635f71db 100644 --- a/arch/mips/loongson64/loongson-3/dma.c +++ b/arch/mips/loongson64/dma.c diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/env.c index 09d5cf4676ca..0daeb7bcf023 100644 --- a/arch/mips/loongson64/common/env.c +++ b/arch/mips/loongson64/env.c @@ -30,41 +30,13 @@ u64 loongson_freqctrl[MAX_PACKAGES]; unsigned long long smp_group[4]; -#define parse_even_earlier(res, option, p) \ -do { \ - unsigned int tmp __maybe_unused; \ - \ - if (strncmp(option, (char *)p, strlen(option)) == 0) \ - tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \ -} while (0) +const char *get_system_type(void) +{ + return "Generic Loongson64 System"; +} void __init prom_init_env(void) { - /* pmon passes arguments in 32bit pointers */ - unsigned int processor_id; - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - int *_prom_envp; - long l; - - /* firmware arguments are initialized in head.S */ - _prom_envp = (int *)fw_arg2; - - l = (long)*_prom_envp; - while (l != 0) { - parse_even_earlier(cpu_clock_freq, "cpuclock", l); - parse_even_earlier(memsize, "memsize", l); - parse_even_earlier(highmemsize, "highmemsize", l); - _prom_envp++; - l = (long)*_prom_envp; - } - if (memsize == 0) - memsize = 256; - - loongson_sysconf.nr_uarts = 1; - - pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); -#else struct boot_params *boot_p; struct loongson_params *loongson_p; struct system_loongson *esys; @@ -182,31 +154,5 @@ void __init prom_init_env(void) if (loongson_sysconf.nr_sensors) memcpy(loongson_sysconf.sensors, esys->sensors, sizeof(struct sensor_device) * loongson_sysconf.nr_sensors); -#endif - if (cpu_clock_freq == 0) { - processor_id = (¤t_cpu_data)->processor_id; - switch (processor_id & PRID_REV_MASK) { - case PRID_REV_LOONGSON2E: - cpu_clock_freq = 533080000; - break; - case PRID_REV_LOONGSON2F: - cpu_clock_freq = 797000000; - break; - case PRID_REV_LOONGSON3A_R1: - case PRID_REV_LOONGSON3A_R2_0: - case PRID_REV_LOONGSON3A_R2_1: - case PRID_REV_LOONGSON3A_R3_0: - case PRID_REV_LOONGSON3A_R3_1: - cpu_clock_freq = 900000000; - break; - case PRID_REV_LOONGSON3B_R1: - case PRID_REV_LOONGSON3B_R2: - cpu_clock_freq = 1000000000; - break; - default: - cpu_clock_freq = 100000000; - break; - } - } pr_info("CpuClock = %u\n", cpu_clock_freq); } diff --git a/arch/mips/loongson64/loongson-3/hpet.c b/arch/mips/loongson64/hpet.c index ed15430ad64f..ed15430ad64f 100644 --- a/arch/mips/loongson64/loongson-3/hpet.c +++ b/arch/mips/loongson64/hpet.c diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c new file mode 100644 index 000000000000..5ac1a0f35ca4 --- /dev/null +++ b/arch/mips/loongson64/init.c @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ + +#include <linux/memblock.h> +#include <asm/bootinfo.h> +#include <asm/traps.h> +#include <asm/smp-ops.h> +#include <asm/cacheflush.h> +#include <asm/fw/fw.h> + +#include <loongson.h> + +static void __init mips_nmi_setup(void) +{ + void *base; + extern char except_vec_nmi; + + base = (void *)(CAC_BASE + 0x380); + memcpy(base, &except_vec_nmi, 0x80); + flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); +} + +void __init prom_init(void) +{ + fw_init_cmdline(); + prom_init_env(); + + /* init base address of io space */ + set_io_port_base((unsigned long) + ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); + + prom_init_numa_memory(); + + /* Hardcode to CPU UART 0 */ + setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024); + + register_smp_ops(&loongson3_smp_ops); + board_nmi_handler_setup = mips_nmi_setup; +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/irq.c index 5605061f5f98..79ad797497e4 100644 --- a/arch/mips/loongson64/loongson-3/irq.c +++ b/arch/mips/loongson64/irq.c @@ -78,8 +78,12 @@ static void ht_irqdispatch(void) #define UNUSED_IPS (CAUSEF_IP5 | CAUSEF_IP4 | CAUSEF_IP1 | CAUSEF_IP0) -void mach_irq_dispatch(unsigned int pending) +asmlinkage void plat_irq_dispatch(void) { + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + if (pending & CAUSEF_IP7) do_IRQ(LOONGSON_TIMER_IRQ); #if defined(CONFIG_SMP) @@ -127,7 +131,7 @@ void irq_router_init(void) LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10; } -void __init mach_init_irq(void) +void __init arch_init_irq(void) { struct irq_chip *chip; diff --git a/arch/mips/loongson64/loongson-3/Makefile b/arch/mips/loongson64/loongson-3/Makefile deleted file mode 100644 index df39598742b2..000000000000 --- a/arch/mips/loongson64/loongson-3/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for Loongson-3 family machines -# -obj-y += irq.o cop2-ex.o platform.o acpi_init.o dma.o - -obj-$(CONFIG_SMP) += smp.o - -obj-$(CONFIG_NUMA) += numa.o - -obj-$(CONFIG_RS780_HPET) += hpet.o diff --git a/arch/mips/loongson64/loongson-3/numa.c b/arch/mips/loongson64/numa.c index 8f20d2cb3767..ef94a2278561 100644 --- a/arch/mips/loongson64/loongson-3/numa.c +++ b/arch/mips/loongson64/numa.c @@ -26,12 +26,15 @@ #include <asm/wbflush.h> #include <boot_param.h> -static struct node_data prealloc__node_data[MAX_NUMNODES]; +static struct pglist_data prealloc__node_data[MAX_NUMNODES]; unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; EXPORT_SYMBOL(__node_distances); -struct node_data *__node_data[MAX_NUMNODES]; +struct pglist_data *__node_data[MAX_NUMNODES]; EXPORT_SYMBOL(__node_data); +cpumask_t __node_cpumask[MAX_NUMNODES]; +EXPORT_SYMBOL(__node_cpumask); + static void enable_lpa(void) { unsigned long value; @@ -214,7 +217,7 @@ static __init void prom_meminit(void) if (node_online(node)) { szmem(node); node_mem_init(node); - cpumask_clear(&__node_data[(node)]->cpumask); + cpumask_clear(&__node_cpumask[node]); } } memblocks_present(); @@ -228,7 +231,7 @@ static __init void prom_meminit(void) if (loongson_sysconf.reserved_cpus_mask & (1<<cpu)) continue; - cpumask_set_cpu(active_cpu, &__node_data[(node)]->cpumask); + cpumask_set_cpu(active_cpu, &__node_cpumask[node]); pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node); active_cpu++; diff --git a/arch/mips/loongson64/pci.c b/arch/mips/loongson64/pci.c new file mode 100644 index 000000000000..e84ae20c3290 --- /dev/null +++ b/arch/mips/loongson64/pci.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/pci.h> + +#include <pci.h> +#include <loongson.h> +#include <boot_param.h> + +static struct resource loongson_pci_mem_resource = { + .name = "pci memory space", + .start = LOONGSON_PCI_MEM_START, + .end = LOONGSON_PCI_MEM_END, + .flags = IORESOURCE_MEM, +}; + +static struct resource loongson_pci_io_resource = { + .name = "pci io space", + .start = LOONGSON_PCI_IO_START, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller loongson_pci_controller = { + .pci_ops = &loongson_pci_ops, + .io_resource = &loongson_pci_io_resource, + .mem_resource = &loongson_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, +}; + + +extern int sbx00_acpi_init(void); + +static int __init pcibios_init(void) +{ + + loongson_pci_controller.io_map_base = mips_io_port_base; + loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; + loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; + + register_pci_controller(&loongson_pci_controller); + + sbx00_acpi_init(); + + return 0; +} + +arch_initcall(pcibios_init); diff --git a/arch/mips/loongson64/loongson-3/platform.c b/arch/mips/loongson64/platform.c index 13f3404f0030..13f3404f0030 100644 --- a/arch/mips/loongson64/loongson-3/platform.c +++ b/arch/mips/loongson64/platform.c diff --git a/arch/mips/loongson64/pm.c b/arch/mips/loongson64/pm.c new file mode 100644 index 000000000000..7c8556f09781 --- /dev/null +++ b/arch/mips/loongson64/pm.c @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * loongson-specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin <wuzhangjin@gmail.com> + */ +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/pm.h> + +#include <asm/i8259.h> +#include <asm/mipsregs.h> + +#include <loongson.h> + +static unsigned int __maybe_unused cached_master_mask; /* i8259A */ +static unsigned int __maybe_unused cached_slave_mask; +static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */ + +void arch_suspend_disable_irqs(void) +{ + /* disable all mips events */ + local_irq_disable(); + +#ifdef CONFIG_I8259 + /* disable all events of i8259A */ + cached_slave_mask = inb(PIC_SLAVE_IMR); + cached_master_mask = inb(PIC_MASTER_IMR); + + outb(0xff, PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + outb(0xff, PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); +#endif + /* disable all events of bonito */ + cached_bonito_irq_mask = LOONGSON_INTEN; + LOONGSON_INTENCLR = 0xffff; + (void)LOONGSON_INTENCLR; +} + +void arch_suspend_enable_irqs(void) +{ + /* enable all mips events */ + local_irq_enable(); +#ifdef CONFIG_I8259 + /* only enable the cached events of i8259A */ + outb(cached_slave_mask, PIC_SLAVE_IMR); + outb(cached_master_mask, PIC_MASTER_IMR); +#endif + /* enable all cached events of bonito */ + LOONGSON_INTENSET = cached_bonito_irq_mask; + (void)LOONGSON_INTENSET; +} + +/* + * Setup the board-specific events for waking up loongson from wait mode + */ +void __weak setup_wakeup_events(void) +{ +} + +void __weak mach_suspend(void) +{ +} + +void __weak mach_resume(void) +{ +} + +static int loongson_pm_enter(suspend_state_t state) +{ + mach_suspend(); + + mach_resume(); + + return 0; +} + +static int loongson_pm_valid_state(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_ON: + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + return 1; + + default: + return 0; + } +} + +static const struct platform_suspend_ops loongson_pm_ops = { + .valid = loongson_pm_valid_state, + .enter = loongson_pm_enter, +}; + +static int __init loongson_pm_init(void) +{ + suspend_set_ops(&loongson_pm_ops); + + return 0; +} +arch_initcall(loongson_pm_init); diff --git a/arch/mips/loongson64/reset.c b/arch/mips/loongson64/reset.c new file mode 100644 index 000000000000..88b3bd5fed25 --- /dev/null +++ b/arch/mips/loongson64/reset.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * Copyright (C) 2009 Lemote, Inc. + * Author: Zhangjin Wu, wuzhangjin@gmail.com + */ +#include <linux/init.h> +#include <linux/pm.h> + +#include <asm/idle.h> +#include <asm/reboot.h> + +#include <loongson.h> +#include <boot_param.h> + +static inline void loongson_reboot(void) +{ + ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); +} + +static void loongson_restart(char *command) +{ + + void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr; + + fw_restart(); + while (1) { + if (cpu_wait) + cpu_wait(); + } +} + +static void loongson_poweroff(void) +{ + void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr; + + fw_poweroff(); + while (1) { + if (cpu_wait) + cpu_wait(); + } +} + +static void loongson_halt(void) +{ + pr_notice("\n\n** You can safely turn off the power now **\n\n"); + while (1) { + if (cpu_wait) + cpu_wait(); + } +} + +static int __init mips_reboot_setup(void) +{ + _machine_restart = loongson_restart; + _machine_halt = loongson_halt; + pm_power_off = loongson_poweroff; + + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/loongson64/rtc.c b/arch/mips/loongson64/rtc.c new file mode 100644 index 000000000000..8d7628c0f513 --- /dev/null +++ b/arch/mips/loongson64/rtc.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Lemote Fuloong platform support + * + * Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mc146818rtc.h> + +static struct resource loongson_rtc_resources[] = { + { + .start = RTC_PORT(0), + .end = RTC_PORT(1), + .flags = IORESOURCE_IO, + }, { + .start = RTC_IRQ, + .end = RTC_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device loongson_rtc_device = { + .name = "rtc_cmos", + .id = -1, + .resource = loongson_rtc_resources, + .num_resources = ARRAY_SIZE(loongson_rtc_resources), +}; + + +static int __init loongson_rtc_platform_init(void) +{ + platform_device_register(&loongson_rtc_device); + return 0; +} + +device_initcall(loongson_rtc_platform_init); diff --git a/arch/mips/loongson64/setup.c b/arch/mips/loongson64/setup.c new file mode 100644 index 000000000000..4fd27f4f90ed --- /dev/null +++ b/arch/mips/loongson64/setup.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/export.h> +#include <linux/init.h> + +#include <asm/wbflush.h> +#include <asm/bootinfo.h> + +#include <loongson.h> + +static void wbflush_loongson(void) +{ + asm(".set\tpush\n\t" + ".set\tnoreorder\n\t" + ".set mips3\n\t" + "sync\n\t" + "nop\n\t" + ".set\tpop\n\t" + ".set mips0\n\t"); +} + +void (*__wbflush)(void) = wbflush_loongson; +EXPORT_SYMBOL(__wbflush); + +void __init plat_mem_setup(void) +{ +} diff --git a/arch/mips/loongson64/loongson-3/smp.c b/arch/mips/loongson64/smp.c index ce68cdaaf33c..de8e0741ce2d 100644 --- a/arch/mips/loongson64/loongson-3/smp.c +++ b/arch/mips/loongson64/smp.c @@ -18,6 +18,7 @@ #include <asm/tlbflush.h> #include <asm/cacheflush.h> #include <loongson.h> +#include <loongson_regs.h> #include <workarounds.h> #include "smp.h" @@ -48,6 +49,62 @@ static uint32_t core0_c0count[NR_CPUS]; __wbflush(); \ } while (0) +u32 (*ipi_read_clear)(int cpu); +void (*ipi_write_action)(int cpu, u32 action); + +static u32 csr_ipi_read_clear(int cpu) +{ + u32 action; + + /* Load the ipi register to figure out what we're supposed to do */ + action = csr_readl(LOONGSON_CSR_IPI_STATUS); + /* Clear the ipi register to clear the interrupt */ + csr_writel(action, LOONGSON_CSR_IPI_CLEAR); + + return action; +} + +static void csr_ipi_write_action(int cpu, u32 action) +{ + unsigned int irq = 0; + + while ((irq = ffs(action))) { + uint32_t val = CSR_IPI_SEND_BLOCK; + val |= (irq - 1); + val |= (cpu << CSR_IPI_SEND_CPU_SHIFT); + csr_writel(val, LOONGSON_CSR_IPI_SEND); + action &= ~BIT(irq - 1); + } +} + +static u32 legacy_ipi_read_clear(int cpu) +{ + u32 action; + + /* Load the ipi register to figure out what we're supposed to do */ + action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]); + /* Clear the ipi register to clear the interrupt */ + loongson3_ipi_write32(action, ipi_clear0_regs[cpu_logical_map(cpu)]); + + return action; +} + +static void legacy_ipi_write_action(int cpu, u32 action) +{ + loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu]); +} + +static void csr_ipi_probe(void) +{ + if (cpu_has_csr() && csr_readl(LOONGSON_CSR_FEATURES) & LOONGSON_CSRF_IPI) { + ipi_read_clear = csr_ipi_read_clear; + ipi_write_action = csr_ipi_write_action; + } else { + ipi_read_clear = legacy_ipi_read_clear; + ipi_write_action = legacy_ipi_write_action; + } +} + static void ipi_set0_regs_init(void) { ipi_set0_regs[0] = (void *) @@ -233,7 +290,7 @@ static void ipi_mailbox_buf_init(void) */ static void loongson3_send_ipi_single(int cpu, unsigned int action) { - loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(cpu)]); + ipi_write_action(cpu_logical_map(cpu), (u32)action); } static void @@ -242,14 +299,14 @@ loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action) unsigned int i; for_each_cpu(i, mask) - loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]); + ipi_write_action(cpu_logical_map(i), (u32)action); } #define IPI_IRQ_OFFSET 6 void loongson3_send_irq_by_ipi(int cpu, int irqs) { - loongson3_ipi_write32(irqs << IPI_IRQ_OFFSET, ipi_set0_regs[cpu_logical_map(cpu)]); + ipi_write_action(cpu_logical_map(cpu), irqs << IPI_IRQ_OFFSET); } void loongson3_ipi_interrupt(struct pt_regs *regs) @@ -257,13 +314,9 @@ void loongson3_ipi_interrupt(struct pt_regs *regs) int i, cpu = smp_processor_id(); unsigned int action, c0count, irqs; - /* Load the ipi register to figure out what we're supposed to do */ - action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]); + action = ipi_read_clear(cpu); irqs = action >> IPI_IRQ_OFFSET; - /* Clear the ipi register to clear the interrupt */ - loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]); - if (action & SMP_RESCHEDULE_YOURSELF) scheduler_ipi(); @@ -372,6 +425,7 @@ static void __init loongson3_smp_setup(void) num++; } + csr_ipi_probe(); ipi_set0_regs_init(); ipi_clear0_regs_init(); ipi_status0_regs_init(); @@ -450,7 +504,7 @@ static void loongson3_cpu_die(unsigned int cpu) * flush all L1 entries at first. Then, another core (usually Core 0) can * safely disable the clock of the target core. loongson3_play_dead() is * called via CKSEG1 (uncached and unmmaped) */ -static void loongson3a_r1_play_dead(int *state_addr) +static void loongson3_type1_play_dead(int *state_addr) { register int val; register long cpuid, core, node, count; @@ -512,7 +566,7 @@ static void loongson3a_r1_play_dead(int *state_addr) : "a1"); } -static void loongson3a_r2r3_play_dead(int *state_addr) +static void loongson3_type2_play_dead(int *state_addr) { register int val; register long cpuid, core, node, count; @@ -532,27 +586,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr) " cache 1, 3(%[addr]) \n" " addiu %[sets], %[sets], -1 \n" " bnez %[sets], 1b \n" - " addiu %[addr], %[addr], 0x40 \n" - " li %[addr], 0x80000000 \n" /* KSEG0 */ - "2: cache 2, 0(%[addr]) \n" /* flush L1 VCache */ - " cache 2, 1(%[addr]) \n" - " cache 2, 2(%[addr]) \n" - " cache 2, 3(%[addr]) \n" - " cache 2, 4(%[addr]) \n" - " cache 2, 5(%[addr]) \n" - " cache 2, 6(%[addr]) \n" - " cache 2, 7(%[addr]) \n" - " cache 2, 8(%[addr]) \n" - " cache 2, 9(%[addr]) \n" - " cache 2, 10(%[addr]) \n" - " cache 2, 11(%[addr]) \n" - " cache 2, 12(%[addr]) \n" - " cache 2, 13(%[addr]) \n" - " cache 2, 14(%[addr]) \n" - " cache 2, 15(%[addr]) \n" - " addiu %[vsets], %[vsets], -1 \n" - " bnez %[vsets], 2b \n" - " addiu %[addr], %[addr], 0x40 \n" + " addiu %[addr], %[addr], 0x20 \n" " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ " sw %[val], (%[state_addr]) \n" " sync \n" @@ -560,8 +594,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr) " .set pop \n" : [addr] "=&r" (addr), [val] "=&r" (val) : [state_addr] "r" (state_addr), - [sets] "r" (cpu_data[smp_processor_id()].dcache.sets), - [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets)); + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); __asm__ __volatile__( " .set push \n" @@ -576,6 +609,8 @@ static void loongson3a_r2r3_play_dead(int *state_addr) " andi %[node], %[cpuid], 0xc \n" " dsll %[node], 42 \n" /* get node id */ " or %[base], %[base], %[node] \n" + " dsrl %[node], 30 \n" /* 15:14 */ + " or %[base], %[base], %[node] \n" "1: li %[count], 0x100 \n" /* wait for init loop */ "2: bnez %[count], 2b \n" /* limit mailbox access */ " addiu %[count], -1 \n" @@ -595,7 +630,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr) : "a1"); } -static void loongson3b_play_dead(int *state_addr) +static void loongson3_type3_play_dead(int *state_addr) { register int val; register long cpuid, core, node, count; @@ -615,7 +650,27 @@ static void loongson3b_play_dead(int *state_addr) " cache 1, 3(%[addr]) \n" " addiu %[sets], %[sets], -1 \n" " bnez %[sets], 1b \n" - " addiu %[addr], %[addr], 0x20 \n" + " addiu %[addr], %[addr], 0x40 \n" + " li %[addr], 0x80000000 \n" /* KSEG0 */ + "2: cache 2, 0(%[addr]) \n" /* flush L1 VCache */ + " cache 2, 1(%[addr]) \n" + " cache 2, 2(%[addr]) \n" + " cache 2, 3(%[addr]) \n" + " cache 2, 4(%[addr]) \n" + " cache 2, 5(%[addr]) \n" + " cache 2, 6(%[addr]) \n" + " cache 2, 7(%[addr]) \n" + " cache 2, 8(%[addr]) \n" + " cache 2, 9(%[addr]) \n" + " cache 2, 10(%[addr]) \n" + " cache 2, 11(%[addr]) \n" + " cache 2, 12(%[addr]) \n" + " cache 2, 13(%[addr]) \n" + " cache 2, 14(%[addr]) \n" + " cache 2, 15(%[addr]) \n" + " addiu %[vsets], %[vsets], -1 \n" + " bnez %[vsets], 2b \n" + " addiu %[addr], %[addr], 0x40 \n" " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ " sw %[val], (%[state_addr]) \n" " sync \n" @@ -623,7 +678,8 @@ static void loongson3b_play_dead(int *state_addr) " .set pop \n" : [addr] "=&r" (addr), [val] "=&r" (val) : [state_addr] "r" (state_addr), - [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets), + [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets)); __asm__ __volatile__( " .set push \n" @@ -638,8 +694,6 @@ static void loongson3b_play_dead(int *state_addr) " andi %[node], %[cpuid], 0xc \n" " dsll %[node], 42 \n" /* get node id */ " or %[base], %[base], %[node] \n" - " dsrl %[node], 30 \n" /* 15:14 */ - " or %[base], %[base], %[node] \n" "1: li %[count], 0x100 \n" /* wait for init loop */ "2: bnez %[count], 2b \n" /* limit mailbox access */ " addiu %[count], -1 \n" @@ -661,30 +715,42 @@ static void loongson3b_play_dead(int *state_addr) void play_dead(void) { - int *state_addr; + int prid_imp, prid_rev, *state_addr; unsigned int cpu = smp_processor_id(); void (*play_dead_at_ckseg1)(int *); idle_task_exit(); - switch (read_c0_prid() & PRID_REV_MASK) { + + prid_imp = read_c0_prid() & PRID_IMP_MASK; + prid_rev = read_c0_prid() & PRID_REV_MASK; + + if (prid_imp == PRID_IMP_LOONGSON_64G) { + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3_type3_play_dead); + goto out; + } + + switch (prid_rev) { case PRID_REV_LOONGSON3A_R1: default: play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3a_r1_play_dead); + (void *)CKSEG1ADDR((unsigned long)loongson3_type1_play_dead); + break; + case PRID_REV_LOONGSON3B_R1: + case PRID_REV_LOONGSON3B_R2: + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3_type2_play_dead); break; case PRID_REV_LOONGSON3A_R2_0: case PRID_REV_LOONGSON3A_R2_1: case PRID_REV_LOONGSON3A_R3_0: case PRID_REV_LOONGSON3A_R3_1: play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3a_r2r3_play_dead); - break; - case PRID_REV_LOONGSON3B_R1: - case PRID_REV_LOONGSON3B_R2: - play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3b_play_dead); + (void *)CKSEG1ADDR((unsigned long)loongson3_type3_play_dead); break; } + +out: state_addr = &per_cpu(cpu_state, cpu); mb(); play_dead_at_ckseg1(state_addr); diff --git a/arch/mips/loongson64/loongson-3/smp.h b/arch/mips/loongson64/smp.h index 957bde81e0e4..957bde81e0e4 100644 --- a/arch/mips/loongson64/loongson-3/smp.h +++ b/arch/mips/loongson64/smp.h diff --git a/arch/mips/loongson64/time.c b/arch/mips/loongson64/time.c new file mode 100644 index 000000000000..1245f22cec84 --- /dev/null +++ b/arch/mips/loongson64/time.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ +#include <asm/mc146818-time.h> +#include <asm/time.h> +#include <asm/hpet.h> + +#include <loongson.h> + +void __init plat_time_init(void) +{ + /* setup mips r4k timer */ + mips_hpt_frequency = cpu_clock_freq / 2; + +#ifdef CONFIG_RS780_HPET + setup_hpet_timer(); +#endif +} + +void read_persistent_clock64(struct timespec64 *ts) +{ + ts->tv_sec = mc146818_get_cmos_time(); + ts->tv_nsec = 0; +} diff --git a/arch/mips/math-emu/me-debugfs.c b/arch/mips/math-emu/me-debugfs.c index 387724860fa6..d5ad76b2bb67 100644 --- a/arch/mips/math-emu/me-debugfs.c +++ b/arch/mips/math-emu/me-debugfs.c @@ -189,6 +189,7 @@ static int __init debugfs_fpuemu(void) { struct dentry *fpuemu_debugfs_base_dir; struct dentry *fpuemu_debugfs_inst_dir; + char name[32]; fpuemu_debugfs_base_dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir); @@ -225,8 +226,6 @@ do { \ #define FPU_STAT_CREATE_EX(m) \ do { \ - char name[32]; \ - \ adjust_instruction_counter_name(name, #m); \ \ debugfs_create_file(name, 0444, fpuemu_debugfs_inst_dir, \ diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index 0ca401ddf3b7..15bb8cf59828 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -241,6 +241,7 @@ static void r3k_flush_cache_page(struct vm_area_struct *vma, int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; pgd_t *pgdp; + p4d_t *p4dp; pud_t *pudp; pmd_t *pmdp; pte_t *ptep; @@ -253,7 +254,8 @@ static void r3k_flush_cache_page(struct vm_area_struct *vma, return; pgdp = pgd_offset(mm, addr); - pudp = pud_offset(pgdp, addr); + p4dp = p4d_offset(pgdp, addr); + pudp = pud_offset(p4dp, addr); pmdp = pmd_offset(pudp, addr); ptep = pte_offset(pmdp, addr); diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 89b9c851d822..5f3d0103b95d 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -271,12 +271,14 @@ static inline void tx49_blast_icache32(void) /* I'm in even chunk. blast odd chunks */ for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start + 0x400; addr < end; addr += 0x400 * 2) - cache32_unroll32(addr|ws, Index_Invalidate_I); + cache_unroll(32, kernel_cache, Index_Invalidate_I, + addr | ws, 32); CACHE32_UNROLL32_ALIGN; /* I'm in odd chunk. blast even chunks */ for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start; addr < end; addr += 0x400 * 2) - cache32_unroll32(addr|ws, Index_Invalidate_I); + cache_unroll(32, kernel_cache, Index_Invalidate_I, + addr | ws, 32); } static inline void blast_icache32_r4600_v1_page_indexed(unsigned long page) @@ -302,12 +304,14 @@ static inline void tx49_blast_icache32_page_indexed(unsigned long page) /* I'm in even chunk. blast odd chunks */ for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start + 0x400; addr < end; addr += 0x400 * 2) - cache32_unroll32(addr|ws, Index_Invalidate_I); + cache_unroll(32, kernel_cache, Index_Invalidate_I, + addr | ws, 32); CACHE32_UNROLL32_ALIGN; /* I'm in odd chunk. blast even chunks */ for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start; addr < end; addr += 0x400 * 2) - cache32_unroll32(addr|ws, Index_Invalidate_I); + cache_unroll(32, kernel_cache, Index_Invalidate_I, + addr | ws, 32); } static void (* r4k_blast_icache_page)(unsigned long addr); @@ -320,7 +324,7 @@ static void r4k_blast_icache_page_setup(void) r4k_blast_icache_page = (void *)cache_noop; else if (ic_lsize == 16) r4k_blast_icache_page = blast_icache16_page; - else if (ic_lsize == 32 && current_cpu_type() == CPU_LOONGSON2) + else if (ic_lsize == 32 && current_cpu_type() == CPU_LOONGSON2EF) r4k_blast_icache_page = loongson2_blast_icache32_page; else if (ic_lsize == 32) r4k_blast_icache_page = blast_icache32_page; @@ -369,7 +373,7 @@ static void r4k_blast_icache_page_indexed_setup(void) else if (TX49XX_ICACHE_INDEX_INV_WAR) r4k_blast_icache_page_indexed = tx49_blast_icache32_page_indexed; - else if (current_cpu_type() == CPU_LOONGSON2) + else if (current_cpu_type() == CPU_LOONGSON2EF) r4k_blast_icache_page_indexed = loongson2_blast_icache32_page_indexed; else @@ -395,7 +399,7 @@ static void r4k_blast_icache_setup(void) r4k_blast_icache = blast_r4600_v1_icache32; else if (TX49XX_ICACHE_INDEX_INV_WAR) r4k_blast_icache = tx49_blast_icache32; - else if (current_cpu_type() == CPU_LOONGSON2) + else if (current_cpu_type() == CPU_LOONGSON2EF) r4k_blast_icache = loongson2_blast_icache32; else r4k_blast_icache = blast_icache32; @@ -465,7 +469,7 @@ static void r4k_blast_scache_node_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); - if (current_cpu_type() != CPU_LOONGSON3) + if (current_cpu_type() != CPU_LOONGSON64) r4k_blast_scache_node = (void *)cache_noop; else if (sc_lsize == 16) r4k_blast_scache_node = blast_scache16_node; @@ -480,7 +484,7 @@ static void r4k_blast_scache_node_setup(void) static inline void local_r4k___flush_cache_all(void * args) { switch (current_cpu_type()) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: case CPU_R4000SC: case CPU_R4000MC: case CPU_R4400SC: @@ -497,7 +501,7 @@ static inline void local_r4k___flush_cache_all(void * args) r4k_blast_scache(); break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: /* Use get_ebase_cpunum() for both NUMA=y/n */ r4k_blast_scache_node(get_ebase_cpunum() >> 2); break; @@ -650,6 +654,7 @@ static inline void local_r4k_flush_cache_page(void *args) struct mm_struct *mm = vma->vm_mm; int map_coherent = 0; pgd_t *pgdp; + p4d_t *p4dp; pud_t *pudp; pmd_t *pmdp; pte_t *ptep; @@ -664,7 +669,8 @@ static inline void local_r4k_flush_cache_page(void *args) addr &= PAGE_MASK; pgdp = pgd_offset(mm, addr); - pudp = pud_offset(pgdp, addr); + p4dp = p4d_offset(pgdp, addr); + pudp = pud_offset(p4dp, addr); pmdp = pmd_offset(pudp, addr); ptep = pte_offset(pmdp, addr); @@ -770,7 +776,7 @@ static inline void __local_r4k_flush_icache_range(unsigned long start, r4k_blast_icache(); else { switch (boot_cpu_type()) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: protected_loongson2_blast_icache_range(start, end); break; @@ -863,7 +869,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size) preempt_disable(); if (cpu_has_inclusive_pcaches) { if (size >= scache_size) { - if (current_cpu_type() != CPU_LOONGSON3) + if (current_cpu_type() != CPU_LOONGSON64) r4k_blast_scache(); else r4k_blast_scache_node(pa_to_nid(addr)); @@ -904,7 +910,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) preempt_disable(); if (cpu_has_inclusive_pcaches) { if (size >= scache_size) { - if (current_cpu_type() != CPU_LOONGSON3) + if (current_cpu_type() != CPU_LOONGSON64) r4k_blast_scache(); else r4k_blast_scache_node(pa_to_nid(addr)); @@ -1224,7 +1230,7 @@ static void probe_pcache(void) c->options |= MIPS_CPU_PREFETCH; break; - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: icache_size = 1 << (12 + ((config & CONF_IC) >> 9)); c->icache.linesz = 16 << ((config & CONF_IB) >> 5); if (prid & 0x3) @@ -1242,7 +1248,7 @@ static void probe_pcache(void) c->dcache.waybit = 0; break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: config1 = read_c0_config1(); lsize = (config1 >> 19) & 7; if (lsize) @@ -1267,7 +1273,8 @@ static void probe_pcache(void) c->dcache.ways * c->dcache.linesz; c->dcache.waybit = 0; - if ((prid & PRID_REV_MASK) >= PRID_REV_LOONGSON3A_R2_0) + if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >= + (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)) c->options |= MIPS_CPU_PREFETCH; break; @@ -1452,7 +1459,7 @@ static void probe_pcache(void) c->dcache.flags &= ~MIPS_CACHE_ALIASES; break; - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: /* * LOONGSON2 has 4 way icache, but when using indexed cache op, * one op will act on all 4 ways @@ -1478,7 +1485,7 @@ static void probe_vcache(void) struct cpuinfo_mips *c = ¤t_cpu_data; unsigned int config2, lsize; - if (current_cpu_type() != CPU_LOONGSON3) + if (current_cpu_type() != CPU_LOONGSON64) return; config2 = read_c0_config2(); @@ -1653,11 +1660,11 @@ static void setup_scache(void) #endif return; - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: loongson2_sc_init(); return; - case CPU_LOONGSON3: + case CPU_LOONGSON64: loongson3_sc_init(); return; @@ -1926,7 +1933,7 @@ void r4k_cache_init(void) /* Optimization: an L2 flush implicitly flushes the L1 */ current_cpu_data.options |= MIPS_CPU_INCLUSIVE_CACHES; break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: /* Loongson-3 maintains cache coherency by hardware */ __flush_cache_all = cache_noop; __flush_cache_vmap = cache_noop; diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index b7c8a9d79c35..686867270627 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -170,6 +170,7 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; pgd_t *pgdp; + p4d_t *p4dp; pud_t *pudp; pmd_t *pmdp; pte_t *ptep; @@ -183,7 +184,8 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page page &= PAGE_MASK; pgdp = pgd_offset(mm, page); - pudp = pud_offset(pgdp, page); + p4dp = p4d_offset(pgdp, page); + pudp = pud_offset(p4dp, page); pmdp = pmd_offset(pudp, page); ptep = pte_offset(pmdp, page); diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index f589aa8f47d9..1e8d00793784 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -292,8 +292,9 @@ vmalloc_fault: * Do _not_ use "tsk" here. We might be inside * an interrupt in the middle of a task switch.. */ - int offset = __pgd_offset(address); + int offset = pgd_index(address); pgd_t *pgd, *pgd_k; + p4d_t *p4d, *p4d_k; pud_t *pud, *pud_k; pmd_t *pmd, *pmd_k; pte_t *pte_k; @@ -305,8 +306,13 @@ vmalloc_fault: goto no_context; set_pgd(pgd, *pgd_k); - pud = pud_offset(pgd, address); - pud_k = pud_offset(pgd_k, address); + p4d = p4d_offset(pgd, address); + p4d_k = p4d_offset(pgd_k, address); + if (!p4d_present(*p4d_k)) + goto no_context; + + pud = pud_offset(p4d, address); + pud_k = pud_offset(p4d_k, address); if (!pud_present(*pud_k)) goto no_context; diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c index cef152234312..77ffece9c270 100644 --- a/arch/mips/mm/hugetlbpage.c +++ b/arch/mips/mm/hugetlbpage.c @@ -25,11 +25,13 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz) { pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pte_t *pte = NULL; pgd = pgd_offset(mm, addr); - pud = pud_alloc(mm, pgd, addr); + p4d = p4d_alloc(mm, pgd, addr); + pud = pud_alloc(mm, p4d, addr); if (pud) pte = (pte_t *)pmd_alloc(mm, pud, addr); @@ -40,14 +42,18 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr, unsigned long sz) { pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd = NULL; pgd = pgd_offset(mm, addr); if (pgd_present(*pgd)) { - pud = pud_offset(pgd, addr); - if (pud_present(*pud)) - pmd = pmd_offset(pud, addr); + p4d = p4d_offset(pgd, addr); + if (p4d_present(*p4d)) { + pud = pud_offset(p4d, addr); + if (pud_present(*pud)) + pmd = pmd_offset(pud, addr); + } } return (pte_t *) pmd; } diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 090fa653dfa9..50f9ed8c6c1b 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -239,9 +239,9 @@ void __init fixrange_init(unsigned long start, unsigned long end, unsigned long vaddr; vaddr = start; - i = __pgd_offset(vaddr); - j = __pud_offset(vaddr); - k = __pmd_offset(vaddr); + i = pgd_index(vaddr); + j = pud_index(vaddr); + k = pmd_index(vaddr); pgd = pgd_base + i; for ( ; (i < PTRS_PER_PGD) && (vaddr < end); pgd++, i++) { diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c index 1601d90b087b..8317f337a86e 100644 --- a/arch/mips/mm/ioremap.c +++ b/arch/mips/mm/ioremap.c @@ -78,11 +78,15 @@ static int remap_area_pages(unsigned long address, phys_addr_t phys_addr, flush_cache_all(); BUG_ON(address >= end); do { + p4d_t *p4d; pud_t *pud; pmd_t *pmd; error = -ENOMEM; - pud = pud_alloc(&init_mm, dir, address); + p4d = p4d_alloc(&init_mm, dir, address); + if (!p4d) + break; + pud = pud_alloc(&init_mm, p4d, address); if (!pud) break; pmd = pmd_alloc(&init_mm, pud, address); diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index 56e4f8bffd4c..c5578897a4fa 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -187,7 +187,7 @@ static void set_prefetch_parameters(void) } break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: /* Loongson-3 only support the Pref_Load/Pref_Store. */ pref_bias_clear_store = 128; pref_bias_copy_load = 128; diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c index 6416a531a4c3..37c7a01427d2 100644 --- a/arch/mips/mm/pgtable-32.c +++ b/arch/mips/mm/pgtable-32.c @@ -56,6 +56,7 @@ void __init pagetable_init(void) pgd_t *pgd_base; #ifdef CONFIG_HIGHMEM pgd_t *pgd; + p4d_t *p4d; pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -81,8 +82,9 @@ void __init pagetable_init(void) vaddr = PKMAP_BASE; fixrange_init(vaddr & PMD_MASK, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); - pgd = swapper_pg_dir + __pgd_offset(vaddr); - pud = pud_offset(pgd, vaddr); + pgd = swapper_pg_dir + pgd_index(vaddr); + p4d = p4d_offset(pgd, vaddr); + pud = pud_offset(p4d, vaddr); pmd = pmd_offset(pud, vaddr); pte = pte_offset_kernel(pmd, vaddr); pkmap_page_table = pte; diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index c13e46ced425..d7a9d5f211f0 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -35,10 +35,10 @@ extern void build_tlb_refill_handler(void); static inline void flush_micro_tlb(void) { switch (current_cpu_type()) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: write_c0_diag(LOONGSON_DIAG_ITLB); break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: write_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB); break; default: @@ -295,6 +295,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) { unsigned long flags; pgd_t *pgdp; + p4d_t *p4dp; pud_t *pudp; pmd_t *pmdp; pte_t *ptep; @@ -320,7 +321,8 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) mtc0_tlbw_hazard(); tlb_probe(); tlb_probe_hazard(); - pudp = pud_offset(pgdp, address); + p4dp = p4d_offset(pgdp, address); + pudp = pud_offset(p4dp, address); pmdp = pmd_offset(pudp, address); idx = read_c0_index(); #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 41bb91f05688..344e6e9ea43b 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -571,8 +571,8 @@ void build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_BMIPS4350: case CPU_BMIPS4380: case CPU_BMIPS5000: - case CPU_LOONGSON2: - case CPU_LOONGSON3: + case CPU_LOONGSON2EF: + case CPU_LOONGSON64: case CPU_R5500: if (m4kc_tlbp_war()) uasm_i_nop(p); @@ -1377,7 +1377,7 @@ static void build_r4000_tlb_refill_handler(void) switch (boot_cpu_type()) { default: if (sizeof(long) == 4) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: /* Loongson2 ebase is different than r4k, we have more space */ if ((p - tlb_handler) > 64) panic("TLB refill handler space exceeded"); diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile index 011cf9f891e7..e10f216d0422 100644 --- a/arch/mips/oprofile/Makefile +++ b/arch/mips/oprofile/Makefile @@ -14,5 +14,5 @@ oprofile-$(CONFIG_CPU_MIPS64) += op_model_mipsxx.o oprofile-$(CONFIG_CPU_R10000) += op_model_mipsxx.o oprofile-$(CONFIG_CPU_SB1) += op_model_mipsxx.o oprofile-$(CONFIG_CPU_XLR) += op_model_mipsxx.o -oprofile-$(CONFIG_CPU_LOONGSON2) += op_model_loongson2.o -oprofile-$(CONFIG_CPU_LOONGSON3) += op_model_loongson3.o +oprofile-$(CONFIG_CPU_LOONGSON2EF) += op_model_loongson2.o +oprofile-$(CONFIG_CPU_LOONGSON64) += op_model_loongson3.o diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index 2f33992f6dff..03db268cba5c 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -93,7 +93,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case CPU_P5600: case CPU_I6400: case CPU_M5150: - case CPU_LOONGSON1: + case CPU_LOONGSON32: case CPU_SB1: case CPU_SB1A: case CPU_R10000: @@ -104,10 +104,10 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) lmodel = &op_model_mipsxx_ops; break; - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: lmodel = &op_model_loongson2_ops; break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: lmodel = &op_model_loongson3_ops; break; }; diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index 96c13a0ab078..a537bf98912c 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -420,7 +420,7 @@ static int __init mipsxx_init(void) op_model_mipsxx_ops.cpu_type = "mips/sb1"; break; - case CPU_LOONGSON1: + case CPU_LOONGSON32: op_model_mipsxx_ops.cpu_type = "mips/loongson1"; break; diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index d6de4cb2e31c..342ce10ef593 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -35,7 +35,7 @@ obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o -obj-$(CONFIG_LOONGSON_MACH3X) += fixup-loongson3.o ops-loongson3.o +obj-$(CONFIG_MACH_LOONGSON64) += fixup-loongson3.o ops-loongson3.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index 441eb9383b20..8e26b120f994 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -7,21 +7,13 @@ * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ +#include <asm/sn/addrs.h> +#include <asm/sn/types.h> +#include <asm/sn/klconfig.h> +#include <asm/sn/hub.h> +#include <asm/sn/ioc3.h> #include <asm/pci/bridge.h> -dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus); - - return bc->baddr + paddr; -} - -phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) -{ - return dma_addr & ~(0xffUL << 56); -} - #ifdef CONFIG_NUMA int pcibus_to_node(struct pci_bus *bus) { @@ -31,3 +23,20 @@ int pcibus_to_node(struct pci_bus *bus) } EXPORT_SYMBOL(pcibus_to_node); #endif /* CONFIG_NUMA */ + +static void ip29_fixup_phy(struct pci_dev *dev) +{ + int nasid = pcibus_to_node(dev->bus); + u32 sid; + + if (nasid != 1) + return; /* only needed on second module */ + + /* enable ethernet PHY on IP29 systemboard */ + pci_read_config_dword(dev, PCI_SUBSYSTEM_VENDOR_ID, &sid); + if (sid == (PCI_VENDOR_ID_SGI | (IOC3_SUBSYS_IP29_SYSBOARD) << 16)) + REMOTE_HUB_S(nasid, MD_LED0, 0x09); +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, + ip29_fixup_phy); diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c index 7b4d40354ee7..5c1a196be0c5 100644 --- a/arch/mips/pci/pci-xtalk-bridge.c +++ b/arch/mips/pci/pci-xtalk-bridge.c @@ -11,16 +11,38 @@ #include <linux/dma-direct.h> #include <linux/platform_device.h> #include <linux/platform_data/xtalk-bridge.h> +#include <linux/nvmem-consumer.h> +#include <linux/crc16.h> #include <asm/pci/bridge.h> #include <asm/paccess.h> #include <asm/sn/irq_alloc.h> +#include <asm/sn/ioc3.h> + +#define CRC16_INIT 0 +#define CRC16_VALID 0xb001 + +/* + * Common phys<->dma mapping for platforms using pci xtalk bridge + */ +dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus); + + return bc->baddr + paddr; +} + +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr & ~(0xffUL << 56); +} /* * Most of the IOC3 PCI config register aren't present * we emulate what is needed for a normal PCI enumeration */ -static int ioc3_cfg_rd(void *addr, int where, int size, u32 *value) +static int ioc3_cfg_rd(void *addr, int where, int size, u32 *value, u32 sid) { u32 cf, shift, mask; @@ -30,6 +52,9 @@ static int ioc3_cfg_rd(void *addr, int where, int size, u32 *value) if (get_dbe(cf, (u32 *)addr)) return PCIBIOS_DEVICE_NOT_FOUND; break; + case 0x2c: + cf = sid; + break; case 0x3c: /* emulate sane interrupt pin value */ cf = 0x00000100; @@ -111,7 +136,8 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn, */ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) { addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; - return ioc3_cfg_rd(addr, where, size, value); + return ioc3_cfg_rd(addr, where, size, value, + bc->ioc3_sid[slot]); } addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)]; @@ -149,7 +175,8 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn, */ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) { addr = &bridge->b_type1_cfg.c[(fn << 8) | (where & ~3)]; - return ioc3_cfg_rd(addr, where, size, value); + return ioc3_cfg_rd(addr, where, size, value, + bc->ioc3_sid[slot]); } addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))]; @@ -279,16 +306,15 @@ static int bridge_set_affinity(struct irq_data *d, const struct cpumask *mask, struct bridge_irq_chip_data *data = d->chip_data; int bit = d->parent_data->hwirq; int pin = d->hwirq; - nasid_t nasid; int ret, cpu; ret = irq_chip_set_affinity_parent(d, mask, force); if (ret >= 0) { cpu = cpumask_first_and(mask, cpu_online_mask); - nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); + data->nasid = cpu_to_node(cpu); bridge_write(data->bc, b_int_addr[pin].addr, (((data->bc->intr_addr >> 30) & 0x30000) | - bit | (nasid << 8))); + bit | (data->nasid << 8))); bridge_read(data->bc, b_wid_tflush); } return ret; @@ -426,6 +452,117 @@ static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) return irq; } +#define IOC3_SID(sid) (PCI_VENDOR_ID_SGI | ((sid) << 16)) + +static void bridge_setup_ip27_baseio6g(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO6G); + bc->ioc3_sid[6] = IOC3_SID(IOC3_SUBSYS_IP27_MIO); +} + +static void bridge_setup_ip27_baseio(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO); +} + +static void bridge_setup_ip29_baseio(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP29_SYSBOARD); +} + +static void bridge_setup_ip30_sysboard(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP30_SYSBOARD); +} + +static void bridge_setup_menet(struct bridge_controller *bc) +{ + bc->ioc3_sid[0] = IOC3_SID(IOC3_SUBSYS_MENET); + bc->ioc3_sid[1] = IOC3_SID(IOC3_SUBSYS_MENET); + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_MENET); + bc->ioc3_sid[3] = IOC3_SID(IOC3_SUBSYS_MENET4); +} + +#define BRIDGE_BOARD_SETUP(_partno, _setup) \ + { .match = _partno, .setup = _setup } + +static const struct { + char *match; + void (*setup)(struct bridge_controller *bc); +} bridge_ioc3_devid[] = { + BRIDGE_BOARD_SETUP("030-0734-", bridge_setup_ip27_baseio6g), + BRIDGE_BOARD_SETUP("030-0880-", bridge_setup_ip27_baseio6g), + BRIDGE_BOARD_SETUP("030-1023-", bridge_setup_ip27_baseio), + BRIDGE_BOARD_SETUP("030-1124-", bridge_setup_ip27_baseio), + BRIDGE_BOARD_SETUP("030-1025-", bridge_setup_ip29_baseio), + BRIDGE_BOARD_SETUP("030-1244-", bridge_setup_ip29_baseio), + BRIDGE_BOARD_SETUP("030-1389-", bridge_setup_ip29_baseio), + BRIDGE_BOARD_SETUP("030-0887-", bridge_setup_ip30_sysboard), + BRIDGE_BOARD_SETUP("030-1467-", bridge_setup_ip30_sysboard), + BRIDGE_BOARD_SETUP("030-0873-", bridge_setup_menet), +}; + +static void bridge_setup_board(struct bridge_controller *bc, char *partnum) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bridge_ioc3_devid); i++) + if (!strncmp(partnum, bridge_ioc3_devid[i].match, + strlen(bridge_ioc3_devid[i].match))) { + bridge_ioc3_devid[i].setup(bc); + } +} + +static int bridge_nvmem_match(struct device *dev, const void *data) +{ + const char *name = dev_name(dev); + const char *prefix = data; + + if (strlen(name) < strlen(prefix)) + return 0; + + return memcmp(prefix, dev_name(dev), strlen(prefix)) == 0; +} + +static int bridge_get_partnum(u64 baddr, char *partnum) +{ + struct nvmem_device *nvmem; + char prefix[24]; + u8 prom[64]; + int i, j; + int ret; + + snprintf(prefix, sizeof(prefix), "bridge-%012llx-0b-", baddr); + + nvmem = nvmem_device_find(prefix, bridge_nvmem_match); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + ret = nvmem_device_read(nvmem, 0, 64, prom); + nvmem_device_put(nvmem); + + if (ret != 64) + return ret; + + if (crc16(CRC16_INIT, prom, 32) != CRC16_VALID || + crc16(CRC16_INIT, prom + 32, 32) != CRC16_VALID) + return -EINVAL; + + /* Assemble part number */ + j = 0; + for (i = 0; i < 19; i++) + if (prom[i + 11] != ' ') + partnum[j++] = prom[i + 11]; + + for (i = 0; i < 6; i++) + if (prom[i + 32] != ' ') + partnum[j++] = prom[i + 32]; + + partnum[j] = 0; + + return 0; +} + static int bridge_probe(struct platform_device *pdev) { struct xtalk_bridge_platform_data *bd = dev_get_platdata(&pdev->dev); @@ -434,9 +571,14 @@ static int bridge_probe(struct platform_device *pdev) struct pci_host_bridge *host; struct irq_domain *domain, *parent; struct fwnode_handle *fn; + char partnum[26]; int slot; int err; + /* get part number from one wire prom */ + if (bridge_get_partnum(virt_to_phys((void *)bd->bridge_addr), partnum)) + return -EPROBE_DEFER; /* not available yet */ + parent = irq_get_default_host(); if (!parent) return -ENODEV; @@ -517,6 +659,8 @@ static int bridge_probe(struct platform_device *pdev) } bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */ + bridge_setup_board(bc, partnum); + host->dev.parent = dev; host->sysdata = bc; host->busnr = 0; diff --git a/arch/mips/power/cpu.c b/arch/mips/power/cpu.c index 3340a5530de3..a15e29dfc7b3 100644 --- a/arch/mips/power/cpu.c +++ b/arch/mips/power/cpu.c @@ -19,8 +19,8 @@ void save_processor_state(void) if (is_fpu_owner()) save_fp(current); - if (cpu_has_dsp) - save_dsp(current); + + save_dsp(current); } void restore_processor_state(void) @@ -29,8 +29,8 @@ void restore_processor_state(void) if (is_fpu_owner()) restore_fp(current); - if (cpu_has_dsp) - restore_dsp(current); + + restore_dsp(current); } int pfn_is_nosave(unsigned long pfn) diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c index 1944d41507ef..74e5b9e27d6c 100644 --- a/arch/mips/sgi-ip22/ip22-mc.c +++ b/arch/mips/sgi-ip22/ip22-mc.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/export.h> #include <linux/kernel.h> +#include <linux/memblock.h> #include <linux/spinlock.h> #include <asm/io.h> @@ -40,70 +41,36 @@ static inline unsigned int get_bank_config(int bank) return bank % 2 ? res & 0xffff : res >> 16; } -struct mem { - unsigned long addr; - unsigned long size; -}; - +#if defined(CONFIG_SGI_IP28) || defined(CONFIG_32BIT) +static void __init probe_memory(void) +{ + /* prom detects all usable memory */ +} +#else /* - * Detect installed memory, do some sanity checks and notify kernel about it + * Detect installed memory, which PROM misses */ static void __init probe_memory(void) { - int i, j, found, cnt = 0; - struct mem bank[4]; - struct mem space[2] = {{SGIMC_SEG0_BADDR, 0}, {SGIMC_SEG1_BADDR, 0}}; + unsigned long addr, size; + int i; printk(KERN_INFO "MC: Probing memory configuration:\n"); - for (i = 0; i < ARRAY_SIZE(bank); i++) { + for (i = 0; i < 4; i++) { unsigned int tmp = get_bank_config(i); if (!(tmp & SGIMC_MCONFIG_BVALID)) continue; - bank[cnt].size = get_bank_size(tmp); - bank[cnt].addr = get_bank_addr(tmp); + size = get_bank_size(tmp); + addr = get_bank_addr(tmp); printk(KERN_INFO " bank%d: %3ldM @ %08lx\n", - i, bank[cnt].size / 1024 / 1024, bank[cnt].addr); - cnt++; - } + i, size / 1024 / 1024, addr); - /* And you thought bubble sort is dead algorithm... */ - do { - unsigned long addr, size; - - found = 0; - for (i = 1; i < cnt; i++) - if (bank[i-1].addr > bank[i].addr) { - addr = bank[i].addr; - size = bank[i].size; - bank[i].addr = bank[i-1].addr; - bank[i].size = bank[i-1].size; - bank[i-1].addr = addr; - bank[i-1].size = size; - found = 1; - } - } while (found); - - /* Figure out how are memory banks mapped into spaces */ - for (i = 0; i < cnt; i++) { - found = 0; - for (j = 0; j < ARRAY_SIZE(space) && !found; j++) - if (space[j].addr + space[j].size == bank[i].addr) { - space[j].size += bank[i].size; - found = 1; - } - /* There is either hole or overlapping memory */ - if (!found) - printk(KERN_CRIT "MC: Memory configuration mismatch " - "(%08lx), expect Bus Error soon\n", - bank[i].addr); + if (addr >= SGIMC_SEG1_BADDR) + memblock_add(addr, size); } - - for (i = 0; i < ARRAY_SIZE(space); i++) - if (space[i].size) - add_memory_region(space[i].addr, space[i].size, - BOOT_MEM_RAM); } +#endif void __init sgimc_init(void) { @@ -205,10 +172,9 @@ void __init sgimc_init(void) probe_memory(); } -void __init prom_meminit(void) {} -void __init prom_free_prom_memory(void) -{ #ifdef CONFIG_SGI_IP28 +void __init prom_cleanup(void) +{ u32 mconfig1; unsigned long flags; spinlock_t lock; @@ -233,5 +199,5 @@ void __init prom_free_prom_memory(void) sgimc->mconfig1 = mconfig1; iob(); spin_unlock_irqrestore(&lock, flags); -#endif } +#endif diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig index ef3847e7aee0..e5b6cadbec85 100644 --- a/arch/mips/sgi-ip27/Kconfig +++ b/arch/mips/sgi-ip27/Kconfig @@ -38,10 +38,3 @@ config REPLICATE_KTEXT Say Y here to enable replicating the kernel text across multiple nodes in a NUMA cluster. This trades memory for speed. -config REPLICATE_EXHANDLERS - bool "Exception handler replication support" - depends on SGI_IP27 - help - Say Y here to enable replicating the kernel exception handlers - across multiple nodes in a NUMA cluster. This trades memory for - speed. diff --git a/arch/mips/sgi-ip27/ip27-common.h b/arch/mips/sgi-ip27/ip27-common.h new file mode 100644 index 000000000000..3ffbcf9bfd41 --- /dev/null +++ b/arch/mips/sgi-ip27/ip27-common.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __IP27_COMMON_H +#define __IP27_COMMON_H + +extern void ip27_reboot_setup(void); +extern void hub_rt_clock_event_init(void); +extern const struct plat_smp_ops ip27_smp_ops; + +#endif /* __IP27_COMMON_H */ diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c index 6ebb8845a77c..a538d0ceb61d 100644 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ b/arch/mips/sgi-ip27/ip27-hubio.c @@ -25,10 +25,9 @@ static int force_fire_and_forget = 1; * @size: size of the PIO mapping * **/ -unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, +unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget, unsigned long xtalk_addr, size_t size) { - nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); unsigned i; /* use small-window mapping if possible */ @@ -44,7 +43,7 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, xtalk_addr &= ~(BWIN_SIZE-1); for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) { - if (test_and_set_bit(i, hub_data(cnode)->h_bigwin_used)) + if (test_and_set_bit(i, hub_data(nasid)->h_bigwin_used)) continue; /* @@ -171,13 +170,12 @@ static void hub_set_piomode(nasid_t nasid) * * @hub: hubinfo structure for our hub */ -void hub_pio_init(cnodeid_t cnode) +void hub_pio_init(nasid_t nasid) { - nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); unsigned i; /* initialize big window piomaps for this hub */ - bitmap_zero(hub_data(cnode)->h_bigwin_used, HUB_NUM_BIG_WINDOW); + bitmap_zero(hub_data(nasid)->h_bigwin_used, HUB_NUM_BIG_WINDOW); for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) IIO_ITTE_DISABLE(nasid, i); diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 59d5375c9021..f597e1ee2df7 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -13,9 +13,11 @@ #include <linux/mm.h> #include <linux/export.h> #include <linux/cpumask.h> +#include <asm/bootinfo.h> #include <asm/cpu.h> #include <asm/io.h> #include <asm/pgtable.h> +#include <asm/sgialib.h> #include <asm/time.h> #include <asm/sn/types.h> #include <asm/sn/sn0/addrs.h> @@ -36,30 +38,23 @@ #include <asm/sn/sn0/ip27.h> #include <asm/sn/mapped_kernel.h> +#include "ip27-common.h" + #define CPU_NONE (cpuid_t)-1 -static DECLARE_BITMAP(hub_init_mask, MAX_COMPACT_NODES); +static DECLARE_BITMAP(hub_init_mask, MAX_NUMNODES); nasid_t master_nasid = INVALID_NASID; -cnodeid_t nasid_to_compact_node[MAX_NASIDS]; -nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; -cnodeid_t cpuid_to_compact_node[MAXCPUS]; - -EXPORT_SYMBOL(nasid_to_compact_node); - struct cpuinfo_ip27 sn_cpu_info[NR_CPUS]; EXPORT_SYMBOL_GPL(sn_cpu_info); -extern void pcibr_setup(cnodeid_t); - -static void per_hub_init(cnodeid_t cnode) +static void per_hub_init(nasid_t nasid) { - struct hub_data *hub = hub_data(cnode); - nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); + struct hub_data *hub = hub_data(nasid); cpumask_set_cpu(smp_processor_id(), &hub->h_cpus); - if (test_and_set_bit(cnode, hub_init_mask)) + if (test_and_set_bit(nasid, hub_init_mask)) return; /* * Set CRB timeout at 5ms, (< PI timeout of 10ms) @@ -67,40 +62,31 @@ static void per_hub_init(cnodeid_t cnode) REMOTE_HUB_S(nasid, IIO_ICTP, 0x800); REMOTE_HUB_S(nasid, IIO_ICTO, 0xff); - hub_rtc_init(cnode); + hub_rtc_init(nasid); -#ifdef CONFIG_REPLICATE_EXHANDLERS - /* - * If this is not a headless node initialization, - * copy over the caliased exception handlers. - */ - if (get_compact_nodeid() == cnode) { - extern char except_vec2_generic, except_vec3_generic; - extern void build_tlb_refill_handler(void); - - memcpy((void *)(CKSEG0 + 0x100), &except_vec2_generic, 0x80); - memcpy((void *)(CKSEG0 + 0x180), &except_vec3_generic, 0x80); - build_tlb_refill_handler(); - memcpy((void *)(CKSEG0 + 0x100), (void *) CKSEG0, 0x80); - memcpy((void *)(CKSEG0 + 0x180), &except_vec3_generic, 0x100); + if (nasid) { + /* copy exception handlers from first node to current node */ + memcpy((void *)NODE_OFFSET_TO_K0(nasid, 0), + (void *)CKSEG0, 0x200); __flush_cache_all(); + /* switch to node local exception handlers */ + REMOTE_HUB_S(nasid, PI_CALIAS_SIZE, PI_CALIAS_SIZE_8K); } -#endif } void per_cpu_init(void) { int cpu = smp_processor_id(); int slice = LOCAL_HUB_L(PI_CPU_NUM); - cnodeid_t cnode = get_compact_nodeid(); - struct hub_data *hub = hub_data(cnode); + nasid_t nasid = get_nasid(); + struct hub_data *hub = hub_data(nasid); if (test_and_set_bit(slice, &hub->slice_map)) return; clear_c0_status(ST0_IM); - per_hub_init(cnode); + per_hub_init(nasid); cpu_time_init(); install_ipi(); @@ -122,21 +108,13 @@ get_nasid(void) >> NSRI_NODEID_SHFT); } -/* - * Map the physical node id to a virtual node id (virtual node ids are contiguous). - */ -cnodeid_t get_compact_nodeid(void) -{ - return NASID_TO_COMPACT_NODEID(get_nasid()); -} - -extern void ip27_reboot_setup(void); - void __init plat_mem_setup(void) { u64 p, e, n_mode; nasid_t nid; + register_smp_ops(&ip27_smp_ops); + ip27_reboot_setup(); /* @@ -175,3 +153,15 @@ void __init plat_mem_setup(void) ioport_resource.end = ~0UL; set_io_port_base(IO_BASE); } + +const char *get_system_type(void) +{ + return "SGI Origin"; +} + +void __init prom_init(void) +{ + prom_init_cmdline(fw_arg0, (LONG *)fw_arg1); + prom_meminit(); +} + diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 37be04975831..c72ae330ea93 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -73,7 +73,10 @@ static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask) int cpu; cpu = cpumask_first_and(mask, cpu_online_mask); - nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); + if (cpu >= nr_cpu_ids) + cpu = cpumask_any(cpu_online_mask); + + nasid = cpu_to_node(cpu); hd->cpu = cpu; if (!cputoslice(cpu)) { hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_A); @@ -137,8 +140,9 @@ static int hub_domain_alloc(struct irq_domain *domain, unsigned int virq, handle_level_irq, NULL, NULL); /* use CPU connected to nearest hub */ - hub = hub_data(NASID_TO_COMPACT_NODEID(info->nasid)); + hub = hub_data(info->nasid); setup_hub_mask(hd, &hub->h_cpus); + info->nasid = cpu_to_node(hd->cpu); /* Make sure it's not already pending when we connect it. */ REMOTE_HUB_CLR_INTR(info->nasid, swlevel); diff --git a/arch/mips/sgi-ip27/ip27-klconfig.c b/arch/mips/sgi-ip27/ip27-klconfig.c index 41171ff0c75e..6cb2160e7689 100644 --- a/arch/mips/sgi-ip27/ip27-klconfig.c +++ b/arch/mips/sgi-ip27/ip27-klconfig.c @@ -73,11 +73,6 @@ lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_type) return (lboard_t *)NULL; } -cnodeid_t get_cpu_cnode(cpuid_t cpu) -{ - return CPUID_TO_COMPACT_NODEID(cpu); -} - klcpu_t *nasid_slice_to_cpuinfo(nasid_t nasid, int slice) { lboard_t *brd; @@ -102,19 +97,14 @@ klcpu_t *sn_get_cpuinfo(cpuid_t cpu) nasid_t nasid; int slice; klcpu_t *acpu; - gda_t *gdap = GDA; - cnodeid_t cnode; if (!(cpu < MAXCPUS)) { printk("sn_get_cpuinfo: illegal cpuid 0x%lx\n", cpu); return NULL; } - cnode = get_cpu_cnode(cpu); - if (cnode == INVALID_CNODEID) - return NULL; - - if ((nasid = gdap->g_nasidtable[cnode]) == INVALID_NASID) + nasid = cputonasid(cpu); + if (nasid == INVALID_NASID) return NULL; for (slice = 0; slice < CPUS_PER_NODE; slice++) { diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c index a4f01328de62..ee1c6ff4aa00 100644 --- a/arch/mips/sgi-ip27/ip27-klnuma.c +++ b/arch/mips/sgi-ip27/ip27-klnuma.c @@ -38,13 +38,13 @@ void __init setup_replication_mask(void) #error Kernel replication works with mapped kernel support. No calias support. #endif { - cnodeid_t cnode; + nasid_t nasid; - for_each_online_node(cnode) { - if (cnode == 0) + for_each_online_node(nasid) { + if (nasid == 0) continue; /* Advertise that we have a copy of the kernel */ - cpumask_set_cpu(cnode, &ktext_repmask); + cpumask_set_cpu(nasid, &ktext_repmask); } } #endif @@ -85,7 +85,6 @@ static __init void copy_kernel(nasid_t dest_nasid) void __init replicate_kernel_text(void) { - cnodeid_t cnode; nasid_t client_nasid; nasid_t server_nasid; @@ -94,13 +93,12 @@ void __init replicate_kernel_text(void) /* Record where the master node should get its kernel text */ set_ktext_source(master_nasid, master_nasid); - for_each_online_node(cnode) { - if (cnode == 0) + for_each_online_node(client_nasid) { + if (client_nasid == 0) continue; - client_nasid = COMPACT_TO_NASID_NODEID(cnode); /* Check if this node should get a copy of the kernel */ - if (cpumask_test_cpu(cnode, &ktext_repmask)) { + if (cpumask_test_cpu(client_nasid, &ktext_repmask)) { server_nasid = client_nasid; copy_kernel(server_nasid); } @@ -115,17 +113,16 @@ void __init replicate_kernel_text(void) * data structures on the first couple of pages of the first slot of each * node. If this is the case, getfirstfree(node) > getslotstart(node, 0). */ -unsigned long node_getfirstfree(cnodeid_t cnode) +unsigned long node_getfirstfree(nasid_t nasid) { unsigned long loadbase = REP_BASE; - nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); unsigned long offset; #ifdef CONFIG_MAPPED_KERNEL loadbase += 16777216; #endif offset = PAGE_ALIGN((unsigned long)(&_end)) - loadbase; - if ((cnode == 0) || (cpumask_test_cpu(cnode, &ktext_repmask))) + if ((nasid == 0) || (cpumask_test_cpu(nasid, &ktext_repmask))) return TO_NODE(nasid, offset) >> PAGE_SHIFT; else return KDM_TO_PHYS(PAGE_ALIGN(SYMMON_STK_ADDR(nasid, 0))) >> PAGE_SHIFT; diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index fb077a947575..563aad5e6398 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -33,7 +33,7 @@ #define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) #define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) -struct node_data *__node_data[MAX_COMPACT_NODES]; +struct node_data *__node_data[MAX_NUMNODES]; EXPORT_SYMBOL(__node_data); @@ -44,23 +44,23 @@ static int is_fine_dirmode(void) return ((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK) >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE; } -static u64 get_region(cnodeid_t cnode) +static u64 get_region(nasid_t nasid) { if (fine_mode) - return COMPACT_TO_NASID_NODEID(cnode) >> NASID_TO_FINEREG_SHFT; + return nasid >> NASID_TO_FINEREG_SHFT; else - return COMPACT_TO_NASID_NODEID(cnode) >> NASID_TO_COARSEREG_SHFT; + return nasid >> NASID_TO_COARSEREG_SHFT; } static u64 region_mask; static void gen_region_mask(u64 *region_mask) { - cnodeid_t cnode; + nasid_t nasid; (*region_mask) = 0; - for_each_online_node(cnode) { - (*region_mask) |= 1ULL << get_region(cnode); + for_each_online_node(nasid) { + (*region_mask) |= 1ULL << get_region(nasid); } } @@ -104,23 +104,18 @@ static void router_recurse(klrou_t *router_a, klrou_t *router_b, int depth) router_a->rou_rflag = 0; } -unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; +unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; EXPORT_SYMBOL(__node_distances); static int __init compute_node_distance(nasid_t nasid_a, nasid_t nasid_b) { klrou_t *router, *router_a = NULL, *router_b = NULL; lboard_t *brd, *dest_brd; - cnodeid_t cnode; nasid_t nasid; int port; /* Figure out which routers nodes in question are connected to */ - for_each_online_node(cnode) { - nasid = COMPACT_TO_NASID_NODEID(cnode); - - if (nasid == -1) continue; - + for_each_online_node(nasid) { brd = find_lboard_class((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_ROUTER); @@ -176,19 +171,16 @@ static int __init compute_node_distance(nasid_t nasid_a, nasid_t nasid_b) static void __init init_topology_matrix(void) { - nasid_t nasid, nasid2; - cnodeid_t row, col; + nasid_t row, col; - for (row = 0; row < MAX_COMPACT_NODES; row++) - for (col = 0; col < MAX_COMPACT_NODES; col++) + for (row = 0; row < MAX_NUMNODES; row++) + for (col = 0; col < MAX_NUMNODES; col++) __node_distances[row][col] = -1; for_each_online_node(row) { - nasid = COMPACT_TO_NASID_NODEID(row); for_each_online_node(col) { - nasid2 = COMPACT_TO_NASID_NODEID(col); __node_distances[row][col] = - compute_node_distance(nasid, nasid2); + compute_node_distance(row, col); } } } @@ -196,12 +188,11 @@ static void __init init_topology_matrix(void) static void __init dump_topology(void) { nasid_t nasid; - cnodeid_t cnode; lboard_t *brd, *dest_brd; int port; int router_num = 0; klrou_t *router; - cnodeid_t row, col; + nasid_t row, col; pr_info("************** Topology ********************\n"); @@ -216,11 +207,7 @@ static void __init dump_topology(void) pr_cont("\n"); } - for_each_online_node(cnode) { - nasid = COMPACT_TO_NASID_NODEID(cnode); - - if (nasid == -1) continue; - + for_each_online_node(nasid) { brd = find_lboard_class((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_ROUTER); @@ -254,21 +241,17 @@ static void __init dump_topology(void) } } -static unsigned long __init slot_getbasepfn(cnodeid_t cnode, int slot) +static unsigned long __init slot_getbasepfn(nasid_t nasid, int slot) { - nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); - return ((unsigned long)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT); } -static unsigned long __init slot_psize_compute(cnodeid_t node, int slot) +static unsigned long __init slot_psize_compute(nasid_t nasid, int slot) { - nasid_t nasid; lboard_t *brd; klmembnk_t *banks; unsigned long size; - nasid = COMPACT_TO_NASID_NODEID(node); /* Find the node board */ brd = find_lboard((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_IP27); if (!brd) @@ -298,7 +281,7 @@ static unsigned long __init slot_psize_compute(cnodeid_t node, int slot) static void __init mlreset(void) { - int i; + nasid_t nasid; master_nasid = get_nasid(); fine_mode = is_fine_dirmode(); @@ -321,22 +304,14 @@ static void __init mlreset(void) /* * Set all nodes' calias sizes to 8k */ - for_each_online_node(i) { - nasid_t nasid; - - nasid = COMPACT_TO_NASID_NODEID(i); - + for_each_online_node(nasid) { /* * Always have node 0 in the region mask, otherwise * CALIAS accesses get exceptions since the hub * thinks it is a node 0 address. */ REMOTE_HUB_S(nasid, PI_REGION_PRESENT, (region_mask | 1)); -#ifdef CONFIG_REPLICATE_EXHANDLERS - REMOTE_HUB_S(nasid, PI_CALIAS_SIZE, PI_CALIAS_SIZE_8K); -#else REMOTE_HUB_S(nasid, PI_CALIAS_SIZE, PI_CALIAS_SIZE_0); -#endif #ifdef LATER /* @@ -354,7 +329,7 @@ static void __init szmem(void) { unsigned long slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */ int slot; - cnodeid_t node; + nasid_t node; for_each_online_node(node) { nodebytes = 0; @@ -384,7 +359,7 @@ static void __init szmem(void) } } -static void __init node_mem_init(cnodeid_t node) +static void __init node_mem_init(nasid_t node) { unsigned long slot_firstpfn = slot_getbasepfn(node, 0); unsigned long slot_freepfn = node_getfirstfree(node); @@ -406,12 +381,8 @@ static void __init node_mem_init(cnodeid_t node) slot_freepfn += PFN_UP(sizeof(struct pglist_data) + sizeof(struct hub_data)); - free_bootmem_with_active_regions(node, end_pfn); - memblock_reserve(slot_firstpfn << PAGE_SHIFT, ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT)); - - sparse_memory_present_with_active_regions(node); } /* @@ -431,19 +402,21 @@ static struct node_data null_node = { */ void __init prom_meminit(void) { - cnodeid_t node; + nasid_t node; mlreset(); szmem(); max_low_pfn = PHYS_PFN(memblock_end_of_DRAM()); - for (node = 0; node < MAX_COMPACT_NODES; node++) { + for (node = 0; node < MAX_NUMNODES; node++) { if (node_online(node)) { node_mem_init(node); continue; } __node_data[node] = &null_node; } + + memblocks_present(); } void __init prom_free_prom_memory(void) diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c index 3aae388561d9..daf3670d94e7 100644 --- a/arch/mips/sgi-ip27/ip27-nmi.c +++ b/arch/mips/sgi-ip27/ip27-nmi.c @@ -17,8 +17,6 @@ #define NODE_NUM_CPUS(n) CPUS_PER_NODE #endif -#define CNODEID_NONE (cnodeid_t)-1 - typedef unsigned long machreg_t; static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED; @@ -152,16 +150,10 @@ void nmi_dump_hub_irq(nasid_t nasid, int slice) * Copy the cpu registers which have been saved in the IP27prom format * into the eframe format for the node under consideration. */ -void nmi_node_eframe_save(cnodeid_t cnode) +void nmi_node_eframe_save(nasid_t nasid) { - nasid_t nasid; int slice; - /* Make sure that we have a valid node */ - if (cnode == CNODEID_NONE) - return; - - nasid = COMPACT_TO_NASID_NODEID(cnode); if (nasid == INVALID_NASID) return; @@ -178,10 +170,10 @@ void nmi_node_eframe_save(cnodeid_t cnode) void nmi_eframes_save(void) { - cnodeid_t cnode; + nasid_t nasid; - for_each_online_node(cnode) - nmi_node_eframe_save(cnode); + for_each_online_node(nasid) + nmi_node_eframe_save(nasid); } void diff --git a/arch/mips/sgi-ip27/ip27-reset.c b/arch/mips/sgi-ip27/ip27-reset.c index e44a15d4f573..74d078247e49 100644 --- a/arch/mips/sgi-ip27/ip27-reset.c +++ b/arch/mips/sgi-ip27/ip27-reset.c @@ -26,6 +26,8 @@ #include <asm/sn/gda.h> #include <asm/sn/sn0/hub.h> +#include "ip27-common.h" + void machine_restart(char *command) __noreturn; void machine_halt(void) __noreturn; void machine_power_off(void) __noreturn; @@ -45,8 +47,7 @@ static void ip27_machine_restart(char *command) #endif #if 0 for_each_online_node(i) - REMOTE_HUB_S(COMPACT_TO_NASID_NODEID(i), PROMOP_REG, - PROMOP_REBOOT); + REMOTE_HUB_S(i, PROMOP_REG, PROMOP_REBOOT); #else LOCAL_HUB_S(NI_PORT_RESET, NPR_PORTRESET | NPR_LOCALRESET); #endif @@ -61,8 +62,7 @@ static void ip27_machine_halt(void) smp_send_stop(); #endif for_each_online_node(i) - REMOTE_HUB_S(COMPACT_TO_NASID_NODEID(i), PROMOP_REG, - PROMOP_RESTART); + REMOTE_HUB_S(i, PROMOP_REG, PROMOP_RESTART); LOCAL_HUB_S(NI_PORT_RESET, NPR_PORTRESET | NPR_LOCALRESET); noreturn; } diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index 20b81209c6b8..faa0244c8b0c 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -27,38 +27,19 @@ #include <asm/sn/sn0/hubio.h> #include <asm/sn/sn0/ip27.h> +#include "ip27-common.h" + /* * Takes as first input the PROM assigned cpu id, and the kernel * assigned cpu id as the second. */ -static void alloc_cpupda(cpuid_t cpu, int cpunum) +static void alloc_cpupda(nasid_t nasid, cpuid_t cpu, int cpunum) { - cnodeid_t node = get_cpu_cnode(cpu); - nasid_t nasid = COMPACT_TO_NASID_NODEID(node); - cputonasid(cpunum) = nasid; - sn_cpu_info[cpunum].p_nodeid = node; cputoslice(cpunum) = get_cpu_slice(cpu); } -static nasid_t get_actual_nasid(lboard_t *brd) -{ - klhub_t *hub; - - if (!brd) - return INVALID_NASID; - - /* find out if we are a completely disabled brd. */ - hub = (klhub_t *)find_first_component(brd, KLSTRUCT_HUB); - if (!hub) - return INVALID_NASID; - if (!(hub->hub_info.flags & KLINFO_ENABLE)) /* disabled node brd */ - return hub->hub_info.physid; - else - return brd->brd_nasid; -} - -static int do_cpumask(cnodeid_t cnode, nasid_t nasid, int highest) +static int do_cpumask(nasid_t nasid, int highest) { static int tot_cpus_found = 0; lboard_t *brd; @@ -72,16 +53,13 @@ static int do_cpumask(cnodeid_t cnode, nasid_t nasid, int highest) acpu = (klcpu_t *)find_first_component(brd, KLSTRUCT_CPU); while (acpu) { cpuid = acpu->cpu_info.virtid; - /* cnode is not valid for completely disabled brds */ - if (get_actual_nasid(brd) == brd->brd_nasid) - cpuid_to_compact_node[cpuid] = cnode; - if (cpuid > highest) - highest = cpuid; /* Only let it join in if it's marked enabled */ if ((acpu->cpu_info.flags & KLINFO_ENABLE) && (tot_cpus_found != NR_CPUS)) { + if (cpuid > highest) + highest = cpuid; set_cpu_possible(cpuid, true); - alloc_cpupda(cpuid, tot_cpus_found); + alloc_cpupda(nasid, cpuid, tot_cpus_found); cpus_found++; tot_cpus_found++; } @@ -103,29 +81,13 @@ void cpu_node_probe(void) int i, highest = 0; gda_t *gdap = GDA; - /* - * Initialize the arrays to invalid nodeid (-1) - */ - for (i = 0; i < MAX_COMPACT_NODES; i++) - compact_to_nasid_node[i] = INVALID_NASID; - for (i = 0; i < MAX_NASIDS; i++) - nasid_to_compact_node[i] = INVALID_CNODEID; - for (i = 0; i < MAXCPUS; i++) - cpuid_to_compact_node[i] = INVALID_CNODEID; - - /* - * MCD - this whole "compact node" stuff can probably be dropped, - * as we can handle sparse numbering now - */ nodes_clear(node_online_map); - for (i = 0; i < MAX_COMPACT_NODES; i++) { + for (i = 0; i < MAX_NUMNODES; i++) { nasid_t nasid = gdap->g_nasidtable[i]; if (nasid == INVALID_NASID) break; - compact_to_nasid_node[i] = nasid; - nasid_to_compact_node[nasid] = i; - node_set_online(num_online_nodes()); - highest = do_cpumask(i, nasid, highest); + node_set_online(nasid); + highest = do_cpumask(nasid, highest); } printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes()); @@ -162,11 +124,10 @@ static void ip27_send_ipi_single(int destid, unsigned int action) irq += cputoslice(destid); /* - * Convert the compact hub number to the NASID to get the correct - * part of the address space. Then set the interrupt bit associated - * with the CPU we want to send the interrupt to. + * Set the interrupt bit associated with the CPU we want to + * send the interrupt to. */ - REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq); + REMOTE_HUB_SEND_INTR(cpu_to_node(destid), irq); } static void ip27_send_ipi_mask(const struct cpumask *mask, unsigned int action) @@ -184,8 +145,6 @@ static void ip27_init_cpu(void) static void ip27_smp_finish(void) { - extern void hub_rt_clock_event_init(void); - hub_rt_clock_event_init(); local_irq_enable(); } @@ -208,23 +167,20 @@ static int ip27_boot_secondary(int cpu, struct task_struct *idle) static void __init ip27_smp_setup(void) { - cnodeid_t cnode; + nasid_t nasid; - for_each_online_node(cnode) { - if (cnode == 0) + for_each_online_node(nasid) { + if (nasid == 0) continue; - intr_clear_all(COMPACT_TO_NASID_NODEID(cnode)); + intr_clear_all(nasid); } replicate_kernel_text(); /* - * Assumption to be fixed: we're always booted on logical / physical - * processor 0. While we're always running on logical processor 0 - * this still means this is physical processor zero; it might for - * example be disabled in the firmware. + * PROM sets up system, that boot cpu is always first CPU on nasid 0 */ - alloc_cpupda(0, 0); + alloc_cpupda(0, 0, 0); } static void __init ip27_prepare_cpus(unsigned int max_cpus) diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 9b4b9ac621a3..17302bbfa7a6 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -38,6 +38,8 @@ #include <asm/sn/sn0/hubio.h> #include <asm/pci/bridge.h> +#include "ip27-common.h" + static int rt_next_event(unsigned long delta, struct clock_event_device *evt) { unsigned int cpu = smp_processor_id(); @@ -170,7 +172,7 @@ void cpu_time_init(void) printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed); } -void hub_rtc_init(cnodeid_t cnode) +void hub_rtc_init(nasid_t nasid) { /* @@ -178,7 +180,7 @@ void hub_rtc_init(cnodeid_t cnode) * If this is not the current node then it is a cpuless * node and timeouts will not happen there. */ - if (get_compact_nodeid() == cnode) { + if (get_nasid() == nasid) { LOCAL_HUB_S(PI_RT_EN_A, 1); LOCAL_HUB_S(PI_RT_EN_B, 1); LOCAL_HUB_S(PI_PROF_EN_A, 0); diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c index 4a1f0b0c29e2..5218b900f855 100644 --- a/arch/mips/sgi-ip27/ip27-xtalk.c +++ b/arch/mips/sgi-ip27/ip27-xtalk.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/smp.h> #include <linux/platform_device.h> +#include <linux/platform_data/sgi-w1.h> #include <linux/platform_data/xtalk-bridge.h> #include <asm/sn/addrs.h> #include <asm/sn/types.h> @@ -26,9 +27,35 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid) { struct xtalk_bridge_platform_data *bd; + struct sgi_w1_platform_data *wd; struct platform_device *pdev; + struct resource w1_res; unsigned long offset; + offset = NODE_OFFSET(nasid); + + wd = kzalloc(sizeof(*wd), GFP_KERNEL); + if (!wd) + goto no_mem; + + snprintf(wd->dev_id, sizeof(wd->dev_id), "bridge-%012lx", + offset + (widget << SWIN_SIZE_BITS)); + + memset(&w1_res, 0, sizeof(w1_res)); + w1_res.start = offset + (widget << SWIN_SIZE_BITS) + + offsetof(struct bridge_regs, b_nic); + w1_res.end = w1_res.start + 3; + w1_res.flags = IORESOURCE_MEM; + + pdev = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO); + if (!pdev) { + kfree(wd); + goto no_mem; + } + platform_device_add_resources(pdev, &w1_res, 1); + platform_device_add_data(pdev, wd, sizeof(*wd)); + platform_device_add(pdev); + bd = kzalloc(sizeof(*bd), GFP_KERNEL); if (!bd) goto no_mem; @@ -38,7 +65,6 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid) goto no_mem; } - offset = NODE_OFFSET(nasid); bd->bridge_addr = RAW_NODE_SWIN_BASE(nasid, widget); bd->intr_addr = BIT_ULL(47) + 0x01800000 + PI_INT_PEND_MOD; @@ -46,14 +72,14 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid) bd->masterwid = masterwid; bd->mem.name = "Bridge PCI MEM"; - bd->mem.start = offset + (widget << SWIN_SIZE_BITS); - bd->mem.end = bd->mem.start + SWIN_SIZE - 1; + bd->mem.start = offset + (widget << SWIN_SIZE_BITS) + BRIDGE_DEVIO0; + bd->mem.end = offset + (widget << SWIN_SIZE_BITS) + SWIN_SIZE - 1; bd->mem.flags = IORESOURCE_MEM; bd->mem_offset = offset; bd->io.name = "Bridge PCI IO"; - bd->io.start = offset + (widget << SWIN_SIZE_BITS); - bd->io.end = bd->io.start + SWIN_SIZE - 1; + bd->io.start = offset + (widget << SWIN_SIZE_BITS) + BRIDGE_DEVIO0; + bd->io.end = offset + (widget << SWIN_SIZE_BITS) + SWIN_SIZE - 1; bd->io.flags = IORESOURCE_IO; bd->io_offset = offset; @@ -81,6 +107,8 @@ static int probe_one_port(nasid_t nasid, int widget, int masterwid) bridge_platform_create(nasid, widget, masterwid); break; default: + pr_info("xtalk:n%d/%d unknown widget (0x%x)\n", + nasid, widget, partnum); break; } @@ -138,14 +166,12 @@ static int xbow_probe(nasid_t nasid) return 0; } -static void xtalk_probe_node(cnodeid_t nid) +static void xtalk_probe_node(nasid_t nasid) { volatile u64 hubreg; - nasid_t nasid; xwidget_part_num_t partnum; widgetreg_t widget_id; - nasid = COMPACT_TO_NASID_NODEID(nid); hubreg = REMOTE_HUB_L(nasid, IIO_LLP_CSR); /* check whether the link is up */ @@ -173,10 +199,10 @@ static void xtalk_probe_node(cnodeid_t nid) static int __init xtalk_init(void) { - cnodeid_t cnode; + nasid_t nasid; - for_each_online_node(cnode) - xtalk_probe_node(cnode); + for_each_online_node(nasid) + xtalk_probe_node(nasid); return 0; } diff --git a/arch/mips/sgi-ip30/Makefile b/arch/mips/sgi-ip30/Makefile new file mode 100644 index 000000000000..18cf561b3d61 --- /dev/null +++ b/arch/mips/sgi-ip30/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the IP30 specific kernel interface routines under Linux. +# + +obj-y := ip30-irq.o ip30-power.o ip30-setup.o ip30-timer.o ip30-xtalk.o + +obj-$(CONFIG_EARLY_PRINTK) += ip30-console.o +obj-$(CONFIG_SMP) += ip30-smp.o diff --git a/arch/mips/sgi-ip30/Platform b/arch/mips/sgi-ip30/Platform new file mode 100644 index 000000000000..2b5695c2049a --- /dev/null +++ b/arch/mips/sgi-ip30/Platform @@ -0,0 +1,8 @@ +# +# SGI-IP30 (Octane/Octane2) +# +ifdef CONFIG_SGI_IP30 +platform-$(CONFIG_SGI_IP30) += sgi-ip30/ +cflags-$(CONFIG_SGI_IP30) += -I$(srctree)/arch/mips/include/asm/mach-ip30 +load-$(CONFIG_SGI_IP30) += 0xa800000020004000 +endif diff --git a/arch/mips/sgi-ip30/ip30-common.h b/arch/mips/sgi-ip30/ip30-common.h new file mode 100644 index 000000000000..d2bcaee712f3 --- /dev/null +++ b/arch/mips/sgi-ip30/ip30-common.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __IP30_COMMON_H +#define __IP30_COMMON_H + +extern struct plat_smp_ops ip30_smp_ops; +extern void __init ip30_per_cpu_init(void); + +#endif /* __IP30_COMMON_H */ diff --git a/arch/mips/sgi-ip30/ip30-console.c b/arch/mips/sgi-ip30/ip30-console.c new file mode 100644 index 000000000000..b91f8c4fdc78 --- /dev/null +++ b/arch/mips/sgi-ip30/ip30-console.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/io.h> + +#include <asm/sn/ioc3.h> + +static inline struct ioc3_uartregs *console_uart(void) +{ + struct ioc3 *ioc3; + + ioc3 = (struct ioc3 *)((void *)(0x900000001f600000)); + return &ioc3->sregs.uarta; +} + +void prom_putchar(char c) +{ + struct ioc3_uartregs *uart = console_uart(); + + while ((readb(&uart->iu_lsr) & 0x20) == 0) + cpu_relax(); + + writeb(c, &uart->iu_thr); +} diff --git a/arch/mips/sgi-ip30/ip30-irq.c b/arch/mips/sgi-ip30/ip30-irq.c new file mode 100644 index 000000000000..d46655b914f1 --- /dev/null +++ b/arch/mips/sgi-ip30/ip30-irq.c @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ip30-irq.c: Highlevel interrupt handling for IP30 architecture. + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/percpu.h> +#include <linux/spinlock.h> +#include <linux/tick.h> +#include <linux/types.h> + +#include <asm/irq_cpu.h> +#include <asm/sgi/heart.h> + +struct heart_irq_data { + u64 *irq_mask; + int cpu; +}; + +static DECLARE_BITMAP(heart_irq_map, HEART_NUM_IRQS); + +static DEFINE_PER_CPU(unsigned long, irq_enable_mask); + +static inline int heart_alloc_int(void) +{ + int bit; + +again: + bit = find_first_zero_bit(heart_irq_map, HEART_NUM_IRQS); + if (bit >= HEART_NUM_IRQS) + return -ENOSPC; + + if (test_and_set_bit(bit, heart_irq_map)) + goto again; + + return bit; +} + +static void ip30_error_irq(struct irq_desc *desc) +{ + u64 pending, mask, cause, error_irqs, err_reg; + int cpu = smp_processor_id(); + int i; + + pending = heart_read(&heart_regs->isr); + mask = heart_read(&heart_regs->imr[cpu]); + cause = heart_read(&heart_regs->cause); + error_irqs = (pending & HEART_L4_INT_MASK & mask); + + /* Bail if there's nothing to process (how did we get here, then?) */ + if (unlikely(!error_irqs)) + return; + + /* Prevent any of the error IRQs from firing again. */ + heart_write(mask & ~(pending), &heart_regs->imr[cpu]); + + /* Ack all error IRQs. */ + heart_write(HEART_L4_INT_MASK, &heart_regs->clear_isr); + + /* + * If we also have a cause value, then something happened, so loop + * through the error IRQs and report a "heart attack" for each one + * and print the value of the HEART cause register. This is really + * primitive right now, but it should hopefully work until a more + * robust error handling routine can be put together. + * + * Refer to heart.h for the HC_* macros to work out the cause + * that got us here. + */ + if (cause) { + pr_alert("IP30: CPU%d: HEART ATTACK! ISR = 0x%.16llx, IMR = 0x%.16llx, CAUSE = 0x%.16llx\n", + cpu, pending, mask, cause); + + if (cause & HC_COR_MEM_ERR) { + err_reg = heart_read(&heart_regs->mem_err_addr); + pr_alert(" HEART_MEMERR_ADDR = 0x%.16llx\n", err_reg); + } + + /* i = 63; i >= 51; i-- */ + for (i = HEART_ERR_MASK_END; i >= HEART_ERR_MASK_START; i--) + if ((pending >> i) & 1) + pr_alert(" HEART Error IRQ #%d\n", i); + + /* XXX: Seems possible to loop forever here, so panic(). */ + panic("IP30: Fatal Error !\n"); + } + + /* Unmask the error IRQs. */ + heart_write(mask, &heart_regs->imr[cpu]); +} + +static void ip30_normal_irq(struct irq_desc *desc) +{ + int cpu = smp_processor_id(); + struct irq_domain *domain; + u64 pend, mask; + int irq; + + pend = heart_read(&heart_regs->isr); + mask = (heart_read(&heart_regs->imr[cpu]) & + (HEART_L0_INT_MASK | HEART_L1_INT_MASK | HEART_L2_INT_MASK)); + + pend &= mask; + if (unlikely(!pend)) + return; + +#ifdef CONFIG_SMP + if (pend & BIT_ULL(HEART_L2_INT_RESCHED_CPU_0)) { + heart_write(BIT_ULL(HEART_L2_INT_RESCHED_CPU_0), + &heart_regs->clear_isr); + scheduler_ipi(); + } else if (pend & BIT_ULL(HEART_L2_INT_RESCHED_CPU_1)) { + heart_write(BIT_ULL(HEART_L2_INT_RESCHED_CPU_1), + &heart_regs->clear_isr); + scheduler_ipi(); + } else if (pend & BIT_ULL(HEART_L2_INT_CALL_CPU_0)) { + heart_write(BIT_ULL(HEART_L2_INT_CALL_CPU_0), + &heart_regs->clear_isr); + generic_smp_call_function_interrupt(); + } else if (pend & BIT_ULL(HEART_L2_INT_CALL_CPU_1)) { + heart_write(BIT_ULL(HEART_L2_INT_CALL_CPU_1), + &heart_regs->clear_isr); + generic_smp_call_function_interrupt(); + } else +#endif + { + domain = irq_desc_get_handler_data(desc); + irq = irq_linear_revmap(domain, __ffs(pend)); + if (irq) + generic_handle_irq(irq); + else + spurious_interrupt(); + } +} + +static void ip30_ack_heart_irq(struct irq_data *d) +{ + heart_write(BIT_ULL(d->hwirq), &heart_regs->clear_isr); +} + +static void ip30_mask_heart_irq(struct irq_data *d) +{ + struct heart_irq_data *hd = irq_data_get_irq_chip_data(d); + unsigned long *mask = &per_cpu(irq_enable_mask, hd->cpu); + + clear_bit(d->hwirq, mask); + heart_write(*mask, &heart_regs->imr[hd->cpu]); +} + +static void ip30_mask_and_ack_heart_irq(struct irq_data *d) +{ + struct heart_irq_data *hd = irq_data_get_irq_chip_data(d); + unsigned long *mask = &per_cpu(irq_enable_mask, hd->cpu); + + clear_bit(d->hwirq, mask); + heart_write(*mask, &heart_regs->imr[hd->cpu]); + heart_write(BIT_ULL(d->hwirq), &heart_regs->clear_isr); +} + +static void ip30_unmask_heart_irq(struct irq_data *d) +{ + struct heart_irq_data *hd = irq_data_get_irq_chip_data(d); + unsigned long *mask = &per_cpu(irq_enable_mask, hd->cpu); + + set_bit(d->hwirq, mask); + heart_write(*mask, &heart_regs->imr[hd->cpu]); +} + +static int ip30_set_heart_irq_affinity(struct irq_data *d, + const struct cpumask *mask, bool force) +{ + struct heart_irq_data *hd = irq_data_get_irq_chip_data(d); + + if (!hd) + return -EINVAL; + + if (irqd_is_started(d)) + ip30_mask_and_ack_heart_irq(d); + + hd->cpu = cpumask_first_and(mask, cpu_online_mask); + + if (irqd_is_started(d)) + ip30_unmask_heart_irq(d); + + irq_data_update_effective_affinity(d, cpumask_of(hd->cpu)); + + return 0; +} + +static struct irq_chip heart_irq_chip = { + .name = "HEART", + .irq_ack = ip30_ack_heart_irq, + .irq_mask = ip30_mask_heart_irq, + .irq_mask_ack = ip30_mask_and_ack_heart_irq, + .irq_unmask = ip30_unmask_heart_irq, + .irq_set_affinity = ip30_set_heart_irq_affinity, +}; + +static int heart_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *arg) +{ + struct irq_alloc_info *info = arg; + struct heart_irq_data *hd; + int hwirq; + + if (nr_irqs > 1 || !info) + return -EINVAL; + + hd = kzalloc(sizeof(*hd), GFP_KERNEL); + if (!hd) + return -ENOMEM; + + hwirq = heart_alloc_int(); + if (hwirq < 0) { + kfree(hd); + return -EAGAIN; + } + irq_domain_set_info(domain, virq, hwirq, &heart_irq_chip, hd, + handle_level_irq, NULL, NULL); + + return 0; +} + +static void heart_domain_free(struct irq_domain *domain, + unsigned int virq, unsigned int nr_irqs) +{ + struct irq_data *irqd; + + if (nr_irqs > 1) + return; + + irqd = irq_domain_get_irq_data(domain, virq); + clear_bit(irqd->hwirq, heart_irq_map); + if (irqd && irqd->chip_data) + kfree(irqd->chip_data); +} + +static const struct irq_domain_ops heart_domain_ops = { + .alloc = heart_domain_alloc, + .free = heart_domain_free, +}; + +void __init ip30_install_ipi(void) +{ + int cpu = smp_processor_id(); + unsigned long *mask = &per_cpu(irq_enable_mask, cpu); + + set_bit(HEART_L2_INT_RESCHED_CPU_0 + cpu, mask); + heart_write(BIT_ULL(HEART_L2_INT_RESCHED_CPU_0 + cpu), + &heart_regs->clear_isr); + set_bit(HEART_L2_INT_CALL_CPU_0 + cpu, mask); + heart_write(BIT_ULL(HEART_L2_INT_CALL_CPU_0 + cpu), + &heart_regs->clear_isr); + + heart_write(*mask, &heart_regs->imr[cpu]); +} + +void __init arch_init_irq(void) +{ + struct irq_domain *domain; + struct fwnode_handle *fn; + unsigned long *mask; + int i; + + mips_cpu_irq_init(); + + /* Mask all IRQs. */ + heart_write(HEART_CLR_ALL_MASK, &heart_regs->imr[0]); + heart_write(HEART_CLR_ALL_MASK, &heart_regs->imr[1]); + heart_write(HEART_CLR_ALL_MASK, &heart_regs->imr[2]); + heart_write(HEART_CLR_ALL_MASK, &heart_regs->imr[3]); + + /* Ack everything. */ + heart_write(HEART_ACK_ALL_MASK, &heart_regs->clear_isr); + + /* Enable specific HEART error IRQs for each CPU. */ + mask = &per_cpu(irq_enable_mask, 0); + *mask |= HEART_CPU0_ERR_MASK; + heart_write(*mask, &heart_regs->imr[0]); + mask = &per_cpu(irq_enable_mask, 1); + *mask |= HEART_CPU1_ERR_MASK; + heart_write(*mask, &heart_regs->imr[1]); + + /* + * Some HEART bits are reserved by hardware or by software convention. + * Mark these as reserved right away so they won't be accidentally + * used later. + */ + set_bit(HEART_L0_INT_GENERIC, heart_irq_map); + set_bit(HEART_L0_INT_FLOW_CTRL_HWTR_0, heart_irq_map); + set_bit(HEART_L0_INT_FLOW_CTRL_HWTR_1, heart_irq_map); + set_bit(HEART_L2_INT_RESCHED_CPU_0, heart_irq_map); + set_bit(HEART_L2_INT_RESCHED_CPU_1, heart_irq_map); + set_bit(HEART_L2_INT_CALL_CPU_0, heart_irq_map); + set_bit(HEART_L2_INT_CALL_CPU_1, heart_irq_map); + set_bit(HEART_L3_INT_TIMER, heart_irq_map); + + /* Reserve the error interrupts (#51 to #63). */ + for (i = HEART_L4_INT_XWID_ERR_9; i <= HEART_L4_INT_HEART_EXCP; i++) + set_bit(i, heart_irq_map); + + fn = irq_domain_alloc_named_fwnode("HEART"); + WARN_ON(fn == NULL); + if (!fn) + return; + domain = irq_domain_create_linear(fn, HEART_NUM_IRQS, + &heart_domain_ops, NULL); + WARN_ON(domain == NULL); + if (!domain) + return; + + irq_set_default_host(domain); + + irq_set_percpu_devid(IP30_HEART_L0_IRQ); + irq_set_chained_handler_and_data(IP30_HEART_L0_IRQ, ip30_normal_irq, + domain); + irq_set_percpu_devid(IP30_HEART_L1_IRQ); + irq_set_chained_handler_and_data(IP30_HEART_L1_IRQ, ip30_normal_irq, + domain); + irq_set_percpu_devid(IP30_HEART_L2_IRQ); + irq_set_chained_handler_and_data(IP30_HEART_L2_IRQ, ip30_normal_irq, + domain); + irq_set_percpu_devid(IP30_HEART_ERR_IRQ); + irq_set_chained_handler_and_data(IP30_HEART_ERR_IRQ, ip30_error_irq, + domain); +} diff --git a/arch/mips/sgi-ip30/ip30-power.c b/arch/mips/sgi-ip30/ip30-power.c new file mode 100644 index 000000000000..120b3f3d5108 --- /dev/null +++ b/arch/mips/sgi-ip30/ip30-power.c @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ip30-power.c: Software powerdown and reset handling for IP30 architecture. + * + * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org> + * 2014 Joshua Kinard <kumba@gentoo.org> + * 2009 Johannes Dickgreber <tanzy@gmx.de> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/notifier.h> +#include <linux/delay.h> +#include <linux/rtc/ds1685.h> +#include <linux/interrupt.h> +#include <linux/pm.h> + +#include <asm/reboot.h> +#include <asm/sgi/heart.h> + +static void __noreturn ip30_machine_restart(char *cmd) +{ + /* + * Execute HEART cold reset + * Yes, it's cold-HEARTed! + */ + heart_write((heart_read(&heart_regs->mode) | HM_COLD_RST), + &heart_regs->mode); + unreachable(); +} + +static int __init ip30_reboot_setup(void) +{ + _machine_restart = ip30_machine_restart; + + return 0; +} + +subsys_initcall(ip30_reboot_setup); diff --git a/arch/mips/sgi-ip30/ip30-setup.c b/arch/mips/sgi-ip30/ip30-setup.c new file mode 100644 index 000000000000..44b1607e964d --- /dev/null +++ b/arch/mips/sgi-ip30/ip30-setup.c @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SGI IP30 miscellaneous setup bits. + * + * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org> + * 2007 Joshua Kinard <kumba@gentoo.org> + * 2009 Johannes Dickgreber <tanzy@gmx.de> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/percpu.h> +#include <linux/memblock.h> + +#include <asm/smp-ops.h> +#include <asm/sgialib.h> +#include <asm/time.h> +#include <asm/sgi/heart.h> + +#include "ip30-common.h" + +/* Structure of accessible HEART registers located in XKPHYS space. */ +struct ip30_heart_regs __iomem *heart_regs = HEART_XKPHYS_BASE; + +/* + * ARCS will report up to the first 1GB of + * memory if queried. Anything beyond that + * is marked as reserved. + */ +#define IP30_MAX_PROM_MEMORY _AC(0x40000000, UL) + +/* + * Memory in the Octane starts at 512MB + */ +#define IP30_MEMORY_BASE _AC(0x20000000, UL) + +/* + * If using ARCS to probe for memory, then + * remaining memory will start at this offset. + */ +#define IP30_REAL_MEMORY_START (IP30_MEMORY_BASE + IP30_MAX_PROM_MEMORY) + +#define MEM_SHIFT(x) ((x) >> 20) + +static void __init ip30_mem_init(void) +{ + unsigned long total_mem; + phys_addr_t addr; + phys_addr_t size; + u32 memcfg; + int i; + + total_mem = 0; + for (i = 0; i < HEART_MEMORY_BANKS; i++) { + memcfg = __raw_readl(&heart_regs->mem_cfg.l[i]); + if (!(memcfg & HEART_MEMCFG_VALID)) + continue; + + addr = memcfg & HEART_MEMCFG_ADDR_MASK; + addr <<= HEART_MEMCFG_UNIT_SHIFT; + addr += IP30_MEMORY_BASE; + size = memcfg & HEART_MEMCFG_SIZE_MASK; + size >>= HEART_MEMCFG_SIZE_SHIFT; + size += 1; + size <<= HEART_MEMCFG_UNIT_SHIFT; + + total_mem += size; + + if (addr >= IP30_REAL_MEMORY_START) + memblock_free(addr, size); + else if ((addr + size) > IP30_REAL_MEMORY_START) + memblock_free(IP30_REAL_MEMORY_START, + size - IP30_MAX_PROM_MEMORY); + } + pr_info("Detected %luMB of physical memory.\n", MEM_SHIFT(total_mem)); +} + +/** + * ip30_cpu_time_init - platform time initialization. + */ +static void __init ip30_cpu_time_init(void) +{ + int cpu = smp_processor_id(); + u64 heart_compare; + unsigned int start, end; + int time_diff; + + heart_compare = (heart_read(&heart_regs->count) + + (HEART_CYCLES_PER_SEC / 10)); + start = read_c0_count(); + while ((heart_read(&heart_regs->count) - heart_compare) & 0x800000) + cpu_relax(); + + end = read_c0_count(); + time_diff = (int)end - (int)start; + mips_hpt_frequency = time_diff * 10; + pr_info("IP30: CPU%d: %d MHz CPU detected.\n", cpu, + (mips_hpt_frequency * 2) / 1000000); +} + +void __init ip30_per_cpu_init(void) +{ + /* Disable all interrupts. */ + clear_c0_status(ST0_IM); + + ip30_cpu_time_init(); +#ifdef CONFIG_SMP + ip30_install_ipi(); +#endif + + enable_percpu_irq(IP30_HEART_L0_IRQ, IRQ_TYPE_NONE); + enable_percpu_irq(IP30_HEART_L1_IRQ, IRQ_TYPE_NONE); + enable_percpu_irq(IP30_HEART_L2_IRQ, IRQ_TYPE_NONE); + enable_percpu_irq(IP30_HEART_ERR_IRQ, IRQ_TYPE_NONE); +} + +/** + * plat_mem_setup - despite the name, misc setup happens here. + */ +void __init plat_mem_setup(void) +{ + ip30_mem_init(); + + /* XXX: Hard lock on /sbin/init if this flag isn't specified. */ + prom_flags |= PROM_FLAG_DONT_FREE_TEMP; + +#ifdef CONFIG_SMP + register_smp_ops(&ip30_smp_ops); +#else + ip30_per_cpu_init(); +#endif + + ioport_resource.start = 0; + ioport_resource.end = ~0UL; + set_io_port_base(IO_BASE); +} diff --git a/arch/mips/sgi-ip30/ip30-smp.c b/arch/mips/sgi-ip30/ip30-smp.c new file mode 100644 index 000000000000..4bfe654602b1 --- /dev/null +++ b/arch/mips/sgi-ip30/ip30-smp.c @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ip30-smp.c: SMP on IP30 architecture. + * Based off of the original IP30 SMP code, with inspiration from ip27-smp.c + * and smp-bmips.c. + * + * Copyright (C) 2005-2007 Stanislaw Skowronek <skylark@unaligned.org> + * 2006-2007, 2014-2015 Joshua Kinard <kumba@gentoo.org> + * 2009 Johannes Dickgreber <tanzy@gmx.de> + */ + +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/sched/task_stack.h> + +#include <asm/time.h> +#include <asm/sgi/heart.h> + +#include "ip30-common.h" + +#define MPCONF_MAGIC 0xbaddeed2 +#define MPCONF_ADDR 0xa800000000000600L +#define MPCONF_SIZE 0x80 +#define MPCONF(x) (MPCONF_ADDR + (x) * MPCONF_SIZE) + +/* HEART can theoretically do 4 CPUs, but only 2 are physically possible */ +#define MP_NCPU 2 + +struct mpconf { + u32 magic; + u32 prid; + u32 physid; + u32 virtid; + u32 scachesz; + u16 fanloads; + u16 res; + void *launch; + void *rendezvous; + u64 res2[3]; + void *stackaddr; + void *lnch_parm; + void *rndv_parm; + u32 idleflag; +}; + +static void ip30_smp_send_ipi_single(int cpu, u32 action) +{ + int irq; + + switch (action) { + case SMP_RESCHEDULE_YOURSELF: + irq = HEART_L2_INT_RESCHED_CPU_0; + break; + case SMP_CALL_FUNCTION: + irq = HEART_L2_INT_CALL_CPU_0; + break; + default: + panic("IP30: Unknown action value in %s!\n", __func__); + } + + irq += cpu; + + /* Poke the other CPU -- it's got mail! */ + heart_write(BIT_ULL(irq), &heart_regs->set_isr); +} + +static void ip30_smp_send_ipi_mask(const struct cpumask *mask, u32 action) +{ + u32 i; + + for_each_cpu(i, mask) + ip30_smp_send_ipi_single(i, action); +} + +static void __init ip30_smp_setup(void) +{ + int i; + int ncpu = 0; + struct mpconf *mpc; + + init_cpu_possible(cpumask_of(0)); + + /* Scan the MPCONF structure and enumerate available CPUs. */ + for (i = 0; i < MP_NCPU; i++) { + mpc = (struct mpconf *)MPCONF(i); + if (mpc->magic == MPCONF_MAGIC) { + set_cpu_possible(i, true); + __cpu_number_map[i] = ++ncpu; + __cpu_logical_map[ncpu] = i; + pr_info("IP30: Slot: %d, PrID: %.8x, PhyID: %d, VirtID: %d\n", + i, mpc->prid, mpc->physid, mpc->virtid); + } + } + pr_info("IP30: Detected %d CPU(s) present.\n", ncpu); + + /* + * Set the coherency algorithm to '5' (cacheable coherent + * exclusive on write). This is needed on IP30 SMP, especially + * for R14000 CPUs, otherwise, instruction bus errors will + * occur upon reaching userland. + */ + change_c0_config(CONF_CM_CMASK, CONF_CM_CACHABLE_COW); +} + +static void __init ip30_smp_prepare_cpus(unsigned int max_cpus) +{ + /* nothing to do here */ +} + +static int __init ip30_smp_boot_secondary(int cpu, struct task_struct *idle) +{ + struct mpconf *mpc = (struct mpconf *)MPCONF(cpu); + + /* Stack pointer (sp). */ + mpc->stackaddr = (void *)__KSTK_TOS(idle); + + /* Global pointer (gp). */ + mpc->lnch_parm = task_thread_info(idle); + + mb(); /* make sure stack and lparm are written */ + + /* Boot CPUx. */ + mpc->launch = smp_bootstrap; + + /* CPUx now executes smp_bootstrap, then ip30_smp_finish */ + return 0; +} + +static void __init ip30_smp_init_cpu(void) +{ + ip30_per_cpu_init(); +} + +static void __init ip30_smp_finish(void) +{ + enable_percpu_irq(get_c0_compare_int(), IRQ_TYPE_NONE); + local_irq_enable(); +} + +struct plat_smp_ops __read_mostly ip30_smp_ops = { + .send_ipi_single = ip30_smp_send_ipi_single, + .send_ipi_mask = ip30_smp_send_ipi_mask, + .smp_setup = ip30_smp_setup, + .prepare_cpus = ip30_smp_prepare_cpus, + .boot_secondary = ip30_smp_boot_secondary, + .init_secondary = ip30_smp_init_cpu, + .smp_finish = ip30_smp_finish, + .prepare_boot_cpu = ip30_smp_init_cpu, +}; diff --git a/arch/mips/sgi-ip30/ip30-timer.c b/arch/mips/sgi-ip30/ip30-timer.c new file mode 100644 index 000000000000..d13e105478ae --- /dev/null +++ b/arch/mips/sgi-ip30/ip30-timer.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ip30-timer.c: Clocksource/clockevent support for the + * HEART chip in SGI Octane (IP30) systems. + * + * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org> + * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de> + * Copyright (C) 2011 Joshua Kinard <kumba@gentoo.org> + */ + +#include <linux/clocksource.h> +#include <linux/cpumask.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/percpu.h> +#include <linux/sched_clock.h> + +#include <asm/time.h> +#include <asm/cevt-r4k.h> +#include <asm/sgi/heart.h> + +static u64 ip30_heart_counter_read(struct clocksource *cs) +{ + return heart_read(&heart_regs->count); +} + +struct clocksource ip30_heart_clocksource = { + .name = "HEART", + .rating = 400, + .read = ip30_heart_counter_read, + .mask = CLOCKSOURCE_MASK(52), + .flags = (CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_VALID_FOR_HRES), +}; + +static u64 notrace ip30_heart_read_sched_clock(void) +{ + return heart_read(&heart_regs->count); +} + +static void __init ip30_heart_clocksource_init(void) +{ + struct clocksource *cs = &ip30_heart_clocksource; + + clocksource_register_hz(cs, HEART_CYCLES_PER_SEC); + + sched_clock_register(ip30_heart_read_sched_clock, 52, + HEART_CYCLES_PER_SEC); +} + +void __init plat_time_init(void) +{ + int irq = get_c0_compare_int(); + + cp0_timer_irq_installed = 1; + c0_compare_irqaction.percpu_dev_id = &mips_clockevent_device; + c0_compare_irqaction.flags &= ~IRQF_SHARED; + irq_set_handler(irq, handle_percpu_devid_irq); + irq_set_percpu_devid(irq); + setup_percpu_irq(irq, &c0_compare_irqaction); + enable_percpu_irq(irq, IRQ_TYPE_NONE); + + ip30_heart_clocksource_init(); +} diff --git a/arch/mips/sgi-ip30/ip30-xtalk.c b/arch/mips/sgi-ip30/ip30-xtalk.c new file mode 100644 index 000000000000..8a2894645529 --- /dev/null +++ b/arch/mips/sgi-ip30/ip30-xtalk.c @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ip30-xtalk.c - Very basic Crosstalk (XIO) detection support. + * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org> + * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de> + * Copyright (C) 2007, 2014-2016 Joshua Kinard <kumba@gentoo.org> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/platform_data/sgi-w1.h> +#include <linux/platform_data/xtalk-bridge.h> + +#include <asm/xtalk/xwidget.h> +#include <asm/pci/bridge.h> + +#define IP30_SWIN_BASE(widget) \ + (0x0000000010000000 | (((unsigned long)(widget)) << 24)) + +#define IP30_RAW_SWIN_BASE(widget) (IO_BASE + IP30_SWIN_BASE(widget)) + +#define IP30_SWIN_SIZE (1 << 24) + +#define IP30_WIDGET_XBOW _AC(0x0, UL) /* XBow is always 0 */ +#define IP30_WIDGET_HEART _AC(0x8, UL) /* HEART is always 8 */ +#define IP30_WIDGET_PCI_BASE _AC(0xf, UL) /* BaseIO PCI is always 15 */ + +#define XTALK_NODEV 0xffffffff + +#define XBOW_REG_LINK_STAT_0 0x114 +#define XBOW_REG_LINK_BLK_SIZE 0x40 +#define XBOW_REG_LINK_ALIVE 0x80000000 + +#define HEART_INTR_ADDR 0x00000080 + +#define xtalk_read __raw_readl + +static void bridge_platform_create(int widget, int masterwid) +{ + struct xtalk_bridge_platform_data *bd; + struct sgi_w1_platform_data *wd; + struct platform_device *pdev; + struct resource w1_res; + + wd = kzalloc(sizeof(*wd), GFP_KERNEL); + if (!wd) + goto no_mem; + + snprintf(wd->dev_id, sizeof(wd->dev_id), "bridge-%012lx", + IP30_SWIN_BASE(widget)); + + memset(&w1_res, 0, sizeof(w1_res)); + w1_res.start = IP30_SWIN_BASE(widget) + + offsetof(struct bridge_regs, b_nic); + w1_res.end = w1_res.start + 3; + w1_res.flags = IORESOURCE_MEM; + + pdev = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO); + if (!pdev) { + kfree(wd); + goto no_mem; + } + platform_device_add_resources(pdev, &w1_res, 1); + platform_device_add_data(pdev, wd, sizeof(*wd)); + platform_device_add(pdev); + + bd = kzalloc(sizeof(*bd), GFP_KERNEL); + if (!bd) + goto no_mem; + pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO); + if (!pdev) { + kfree(bd); + goto no_mem; + } + + bd->bridge_addr = IP30_RAW_SWIN_BASE(widget); + bd->intr_addr = HEART_INTR_ADDR; + bd->nasid = 0; + bd->masterwid = masterwid; + + bd->mem.name = "Bridge PCI MEM"; + bd->mem.start = IP30_SWIN_BASE(widget) + BRIDGE_DEVIO0; + bd->mem.end = IP30_SWIN_BASE(widget) + IP30_SWIN_SIZE - 1; + bd->mem.flags = IORESOURCE_MEM; + bd->mem_offset = IP30_SWIN_BASE(widget); + + bd->io.name = "Bridge PCI IO"; + bd->io.start = IP30_SWIN_BASE(widget) + BRIDGE_DEVIO0; + bd->io.end = IP30_SWIN_BASE(widget) + IP30_SWIN_SIZE - 1; + bd->io.flags = IORESOURCE_IO; + bd->io_offset = IP30_SWIN_BASE(widget); + + platform_device_add_data(pdev, bd, sizeof(*bd)); + platform_device_add(pdev); + pr_info("xtalk:%x bridge widget\n", widget); + return; + +no_mem: + pr_warn("xtalk:%x bridge create out of memory\n", widget); +} + +static unsigned int __init xbow_widget_active(s8 wid) +{ + unsigned int link_stat; + + link_stat = xtalk_read((void *)(IP30_RAW_SWIN_BASE(IP30_WIDGET_XBOW) + + XBOW_REG_LINK_STAT_0 + + XBOW_REG_LINK_BLK_SIZE * + (wid - 8))); + + return (link_stat & XBOW_REG_LINK_ALIVE) ? 1 : 0; +} + +static void __init xtalk_init_widget(s8 wid, s8 masterwid) +{ + xwidget_part_num_t partnum; + widgetreg_t widget_id; + + if (!xbow_widget_active(wid)) + return; + + widget_id = xtalk_read((void *)(IP30_RAW_SWIN_BASE(wid) + WIDGET_ID)); + + partnum = XWIDGET_PART_NUM(widget_id); + + switch (partnum) { + case BRIDGE_WIDGET_PART_NUM: + case XBRIDGE_WIDGET_PART_NUM: + bridge_platform_create(wid, masterwid); + break; + default: + pr_info("xtalk:%x unknown widget (0x%x)\n", wid, partnum); + break; + } +} + +static int __init ip30_xtalk_init(void) +{ + int i; + + /* + * Walk widget IDs backwards so that BaseIO is probed first. This + * ensures that the BaseIO IOC3 is always detected as eth0. + */ + for (i = IP30_WIDGET_PCI_BASE; i > IP30_WIDGET_HEART; i--) + xtalk_init_widget(i, IP30_WIDGET_HEART); + + return 0; +} + +arch_initcall(ip30_xtalk_init); diff --git a/arch/mips/tools/.gitignore b/arch/mips/tools/.gitignore index 56d34ccccce4..b0209450d9ff 100644 --- a/arch/mips/tools/.gitignore +++ b/arch/mips/tools/.gitignore @@ -1 +1,2 @@ elf-entry +loongson3-llsc-check diff --git a/arch/mips/tools/Makefile b/arch/mips/tools/Makefile index 3baee4bc6775..aaef688749f5 100644 --- a/arch/mips/tools/Makefile +++ b/arch/mips/tools/Makefile @@ -3,3 +3,8 @@ hostprogs-y := elf-entry PHONY += elf-entry elf-entry: $(obj)/elf-entry @: + +hostprogs-$(CONFIG_CPU_LOONGSON3_WORKAROUNDS) += loongson3-llsc-check +PHONY += loongson3-llsc-check +loongson3-llsc-check: $(obj)/loongson3-llsc-check + @: diff --git a/arch/mips/tools/loongson3-llsc-check.c b/arch/mips/tools/loongson3-llsc-check.c new file mode 100644 index 000000000000..0ebddd0ae46f --- /dev/null +++ b/arch/mips/tools/loongson3-llsc-check.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <byteswap.h> +#include <elf.h> +#include <endian.h> +#include <errno.h> +#include <fcntl.h> +#include <inttypes.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/mman.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> + +#ifdef be32toh +/* If libc provides le{16,32,64}toh() then we'll use them */ +#elif BYTE_ORDER == LITTLE_ENDIAN +# define le16toh(x) (x) +# define le32toh(x) (x) +# define le64toh(x) (x) +#elif BYTE_ORDER == BIG_ENDIAN +# define le16toh(x) bswap_16(x) +# define le32toh(x) bswap_32(x) +# define le64toh(x) bswap_64(x) +#endif + +/* MIPS opcodes, in bits 31:26 of an instruction */ +#define OP_SPECIAL 0x00 +#define OP_REGIMM 0x01 +#define OP_BEQ 0x04 +#define OP_BNE 0x05 +#define OP_BLEZ 0x06 +#define OP_BGTZ 0x07 +#define OP_BEQL 0x14 +#define OP_BNEL 0x15 +#define OP_BLEZL 0x16 +#define OP_BGTZL 0x17 +#define OP_LL 0x30 +#define OP_LLD 0x34 +#define OP_SC 0x38 +#define OP_SCD 0x3c + +/* Bits 20:16 of OP_REGIMM instructions */ +#define REGIMM_BLTZ 0x00 +#define REGIMM_BGEZ 0x01 +#define REGIMM_BLTZL 0x02 +#define REGIMM_BGEZL 0x03 +#define REGIMM_BLTZAL 0x10 +#define REGIMM_BGEZAL 0x11 +#define REGIMM_BLTZALL 0x12 +#define REGIMM_BGEZALL 0x13 + +/* Bits 5:0 of OP_SPECIAL instructions */ +#define SPECIAL_SYNC 0x0f + +static void usage(FILE *f) +{ + fprintf(f, "Usage: loongson3-llsc-check /path/to/vmlinux\n"); +} + +static int se16(uint16_t x) +{ + return (int16_t)x; +} + +static bool is_ll(uint32_t insn) +{ + switch (insn >> 26) { + case OP_LL: + case OP_LLD: + return true; + + default: + return false; + } +} + +static bool is_sc(uint32_t insn) +{ + switch (insn >> 26) { + case OP_SC: + case OP_SCD: + return true; + + default: + return false; + } +} + +static bool is_sync(uint32_t insn) +{ + /* Bits 31:11 should all be zeroes */ + if (insn >> 11) + return false; + + /* Bits 5:0 specify the SYNC special encoding */ + if ((insn & 0x3f) != SPECIAL_SYNC) + return false; + + return true; +} + +static bool is_branch(uint32_t insn, int *off) +{ + switch (insn >> 26) { + case OP_BEQ: + case OP_BEQL: + case OP_BNE: + case OP_BNEL: + case OP_BGTZ: + case OP_BGTZL: + case OP_BLEZ: + case OP_BLEZL: + *off = se16(insn) + 1; + return true; + + case OP_REGIMM: + switch ((insn >> 16) & 0x1f) { + case REGIMM_BGEZ: + case REGIMM_BGEZL: + case REGIMM_BGEZAL: + case REGIMM_BGEZALL: + case REGIMM_BLTZ: + case REGIMM_BLTZL: + case REGIMM_BLTZAL: + case REGIMM_BLTZALL: + *off = se16(insn) + 1; + return true; + + default: + return false; + } + + default: + return false; + } +} + +static int check_ll(uint64_t pc, uint32_t *code, size_t sz) +{ + ssize_t i, max, sc_pos; + int off; + + /* + * Every LL must be preceded by a sync instruction in order to ensure + * that instruction reordering doesn't allow a prior memory access to + * execute after the LL & cause erroneous results. + */ + if (!is_sync(le32toh(code[-1]))) { + fprintf(stderr, "%" PRIx64 ": LL not preceded by sync\n", pc); + return -EINVAL; + } + + /* Find the matching SC instruction */ + max = sz / 4; + for (sc_pos = 0; sc_pos < max; sc_pos++) { + if (is_sc(le32toh(code[sc_pos]))) + break; + } + if (sc_pos >= max) { + fprintf(stderr, "%" PRIx64 ": LL has no matching SC\n", pc); + return -EINVAL; + } + + /* + * Check branches within the LL/SC loop target sync instructions, + * ensuring that speculative execution can't generate memory accesses + * due to instructions outside of the loop. + */ + for (i = 0; i < sc_pos; i++) { + if (!is_branch(le32toh(code[i]), &off)) + continue; + + /* + * If the branch target is within the LL/SC loop then we don't + * need to worry about it. + */ + if ((off >= -i) && (off <= sc_pos)) + continue; + + /* If the branch targets a sync instruction we're all good... */ + if (is_sync(le32toh(code[i + off]))) + continue; + + /* ...but if not, we have a problem */ + fprintf(stderr, "%" PRIx64 ": Branch target not a sync\n", + pc + (i * 4)); + return -EINVAL; + } + + return 0; +} + +static int check_code(uint64_t pc, uint32_t *code, size_t sz) +{ + int err = 0; + + if (sz % 4) { + fprintf(stderr, "%" PRIx64 ": Section size not a multiple of 4\n", + pc); + err = -EINVAL; + sz -= (sz % 4); + } + + if (is_ll(le32toh(code[0]))) { + fprintf(stderr, "%" PRIx64 ": First instruction in section is an LL\n", + pc); + err = -EINVAL; + } + +#define advance() ( \ + code++, \ + pc += 4, \ + sz -= 4 \ +) + + /* + * Skip the first instructionm allowing check_ll to look backwards + * unconditionally. + */ + advance(); + + /* Now scan through the code looking for LL instructions */ + for (; sz; advance()) { + if (is_ll(le32toh(code[0]))) + err |= check_ll(pc, code, sz); + } + + return err; +} + +int main(int argc, char *argv[]) +{ + int vmlinux_fd, status, err, i; + const char *vmlinux_path; + struct stat st; + Elf64_Ehdr *eh; + Elf64_Shdr *sh; + void *vmlinux; + + status = EXIT_FAILURE; + + if (argc < 2) { + usage(stderr); + goto out_ret; + } + + vmlinux_path = argv[1]; + vmlinux_fd = open(vmlinux_path, O_RDONLY); + if (vmlinux_fd == -1) { + perror("Unable to open vmlinux"); + goto out_ret; + } + + err = fstat(vmlinux_fd, &st); + if (err) { + perror("Unable to stat vmlinux"); + goto out_close; + } + + vmlinux = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, vmlinux_fd, 0); + if (vmlinux == MAP_FAILED) { + perror("Unable to mmap vmlinux"); + goto out_close; + } + + eh = vmlinux; + if (memcmp(eh->e_ident, ELFMAG, SELFMAG)) { + fprintf(stderr, "vmlinux is not an ELF?\n"); + goto out_munmap; + } + + if (eh->e_ident[EI_CLASS] != ELFCLASS64) { + fprintf(stderr, "vmlinux is not 64b?\n"); + goto out_munmap; + } + + if (eh->e_ident[EI_DATA] != ELFDATA2LSB) { + fprintf(stderr, "vmlinux is not little endian?\n"); + goto out_munmap; + } + + for (i = 0; i < le16toh(eh->e_shnum); i++) { + sh = vmlinux + le64toh(eh->e_shoff) + (i * le16toh(eh->e_shentsize)); + + if (sh->sh_type != SHT_PROGBITS) + continue; + if (!(sh->sh_flags & SHF_EXECINSTR)) + continue; + + err = check_code(le64toh(sh->sh_addr), + vmlinux + le64toh(sh->sh_offset), + le64toh(sh->sh_size)); + if (err) + goto out_munmap; + } + + status = EXIT_SUCCESS; +out_munmap: + munmap(vmlinux, st.st_size); +out_close: + close(vmlinux_fd); +out_ret: + return status; +} diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile index 996a934ece7d..e05938997e69 100644 --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile @@ -75,6 +75,7 @@ CFLAGS_REMOVE_vdso.o = -pg GCOV_PROFILE := n UBSAN_SANITIZE := n +KCOV_INSTRUMENT := n # # Shared build commands. |