diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 82 |
1 files changed, 27 insertions, 55 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 08c10c518f83..2af13b162e5e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -16,6 +16,7 @@ config MIPS select BUILDTIME_EXTABLE_SORT select CLONE_BACKWARDS select CPU_PM if CPU_IDLE + select DMA_DIRECT_OPS select GENERIC_ATOMIC64 if !64BIT select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE @@ -97,6 +98,7 @@ config MIPS_GENERIC select HW_HAS_PCI select IRQ_MIPS_CPU select LIBFDT + select MIPS_AUTO_PFN_OFFSET select MIPS_CPU_SCACHE select MIPS_GIC select MIPS_L1_CACHE_SHIFT_7 @@ -193,6 +195,7 @@ config ATH79 select CSRC_R4K select DMA_NONCOHERENT select GPIOLIB + select PINCTRL select HAVE_CLK select COMMON_CLK select CLKDEV_LOOKUP @@ -211,6 +214,8 @@ config ATH79 config BMIPS_GENERIC bool "Broadcom Generic BMIPS kernel" + select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL + select ARCH_HAS_PHYS_TO_DMA select BOOT_RAW select NO_EXCEPT_FILL select USE_OF @@ -438,7 +443,6 @@ config MACH_LOONGSON32 config MACH_LOONGSON64 bool "Loongson-2/3 family of machines" - select ARCH_HAS_PHYS_TO_DMA select SYS_SUPPORTS_ZBOOT help This enables the support of Loongson-2/3 family of machines. @@ -662,11 +666,11 @@ config SGI_IP22 config SGI_IP27 bool "SGI IP27 (Origin200/2000)" + select ARCH_HAS_PHYS_TO_DMA select FW_ARC select FW_ARC64 select BOOT_ELF64 select DEFAULT_SGI_PARTITION - select DMA_COHERENT select SYS_HAS_EARLY_PRINTK select HW_HAS_PCI select NR_CPUS_DEFAULT_64 @@ -721,6 +725,7 @@ config SGI_IP28 config SGI_IP32 bool "SGI IP32 (O2)" + select ARCH_HAS_PHYS_TO_DMA select FW_ARC select FW_ARC32 select BOOT_ELF32 @@ -743,7 +748,6 @@ config SGI_IP32 config SIBYTE_CRHINE bool "Sibyte BCM91120C-CRhine" select BOOT_ELF32 - select DMA_COHERENT select SIBYTE_BCM1120 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -753,7 +757,6 @@ config SIBYTE_CRHINE config SIBYTE_CARMEL bool "Sibyte BCM91120x-Carmel" select BOOT_ELF32 - select DMA_COHERENT select SIBYTE_BCM1120 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -763,7 +766,6 @@ config SIBYTE_CARMEL config SIBYTE_CRHONE bool "Sibyte BCM91125C-CRhone" select BOOT_ELF32 - select DMA_COHERENT select SIBYTE_BCM1125 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -774,7 +776,6 @@ config SIBYTE_CRHONE config SIBYTE_RHONE bool "Sibyte BCM91125E-Rhone" select BOOT_ELF32 - select DMA_COHERENT select SIBYTE_BCM1125H select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -784,7 +785,6 @@ config SIBYTE_RHONE config SIBYTE_SWARM bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 - select DMA_COHERENT select HAVE_PATA_PLATFORM select SIBYTE_SB1250 select SWAP_IO_SPACE @@ -797,7 +797,6 @@ config SIBYTE_SWARM config SIBYTE_LITTLESUR bool "Sibyte BCM91250C2-LittleSur" select BOOT_ELF32 - select DMA_COHERENT select HAVE_PATA_PLATFORM select SIBYTE_SB1250 select SWAP_IO_SPACE @@ -809,7 +808,6 @@ config SIBYTE_LITTLESUR config SIBYTE_SENTOSA bool "Sibyte BCM91250E-Sentosa" select BOOT_ELF32 - select DMA_COHERENT select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -819,7 +817,6 @@ config SIBYTE_SENTOSA config SIBYTE_BIGSUR bool "Sibyte BCM91480B-BigSur" select BOOT_ELF32 - select DMA_COHERENT select NR_CPUS_DEFAULT_4 select SIBYTE_BCM1x80 select SWAP_IO_SPACE @@ -895,8 +892,8 @@ config CAVIUM_OCTEON_SOC bool "Cavium Networks Octeon SoC based boards" select CEVT_R4K select ARCH_HAS_PHYS_TO_DMA + select HAS_RAPIDIO select PHYS_ADDR_T_64BIT - select DMA_COHERENT select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select EDAC_SUPPORT @@ -945,7 +942,6 @@ config NLM_XLR_BOARD select PHYS_ADDR_T_64BIT select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select DMA_COHERENT select NR_CPUS_DEFAULT_32 select CEVT_R4K select CSRC_R4K @@ -973,7 +969,6 @@ config NLM_XLP_BOARD select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_HIGHMEM - select DMA_COHERENT select NR_CPUS_DEFAULT_32 select CEVT_R4K select CSRC_R4K @@ -992,7 +987,6 @@ config MIPS_PARAVIRT bool "Para-Virtualized guest system" select CEVT_R4K select CSRC_R4K - select DMA_COHERENT select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN @@ -1118,12 +1112,14 @@ config DMA_PERDEV_COHERENT bool select DMA_MAYBE_COHERENT -config DMA_COHERENT - bool - config DMA_NONCOHERENT bool + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_HAS_SYNC_DMA_FOR_CPU select NEED_DMA_MAP_STATE + select DMA_NONCOHERENT_MMAP + select DMA_NONCOHERENT_CACHE_SYNC + select DMA_NONCOHERENT_OPS config SYS_HAS_EARLY_PRINTK bool @@ -1365,6 +1361,7 @@ choice config CPU_LOONGSON3 bool "Loongson 3 CPU" depends on SYS_HAS_CPU_LOONGSON3 + select ARCH_HAS_PHYS_TO_DMA select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HUGEPAGES @@ -1427,7 +1424,8 @@ config CPU_LOONGSON1B select LEDS_GPIO_REGISTER help The Loongson 1B is a 32-bit SoC, which implements the MIPS32 - release 2 instruction set. + Release 1 instruction set and part of the MIPS32 Release 2 + instruction set. config CPU_LOONGSON1C bool "Loongson 1C" @@ -1436,7 +1434,8 @@ config CPU_LOONGSON1C select LEDS_GPIO_REGISTER help The Loongson 1C is a 32-bit SoC, which implements the MIPS32 - release 2 instruction set. + Release 1 instruction set and part of the MIPS32 Release 2 + instruction set. config CPU_MIPS32_R1 bool "MIPS32 Release 1" @@ -1831,11 +1830,12 @@ config CPU_LOONGSON2 select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HUGEPAGES + select ARCH_HAS_PHYS_TO_DMA config CPU_LOONGSON1 bool select CPU_MIPS32 - select CPU_MIPSR2 + select CPU_MIPSR1 select CPU_HAS_PREFETCH select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_HIGHMEM @@ -1979,12 +1979,6 @@ config SYS_HAS_CPU_XLR config SYS_HAS_CPU_XLP bool -config MIPS_MALTA_PM - depends on MIPS_MALTA - depends on PCI - bool - default y - # # CPU may reorder R->R, R->W, W->R, W->W # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC @@ -2641,8 +2635,6 @@ config HW_PERF_EVENTS Enable hardware performance counter support for perf events. If disabled, perf events will use software events only. -source "mm/Kconfig" - config SMP bool "Multi-Processing support" depends on SYS_SUPPORTS_SMP @@ -2820,8 +2812,6 @@ config HZ config SCHED_HRTICK def_bool HIGH_RES_TIMERS -source "kernel/Kconfig.preempt" - config KEXEC bool "Kexec system call" select KEXEC_CORE @@ -2994,9 +2984,8 @@ config PGTABLE_LEVELS default 3 if 64BIT && !PAGE_SIZE_64KB default 2 -source "init/Kconfig" - -source "kernel/Kconfig.freezer" +config MIPS_AUTO_PFN_OFFSET + bool menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" @@ -3115,10 +3104,13 @@ config ZONE_DMA32 source "drivers/pcmcia/Kconfig" +config HAS_RAPIDIO + bool + default n + config RAPIDIO tristate "RapidIO support" - depends on PCI - default n + depends on HAS_RAPIDIO || PCI help If you say Y here, the kernel will include drivers and infrastructure code to support RapidIO interconnect devices. @@ -3127,10 +3119,6 @@ source "drivers/rapidio/Kconfig" endmenu -menu "Executable file formats" - -source "fs/Kconfig.binfmt" - config TRAD_SIGNALS bool @@ -3176,8 +3164,6 @@ config BINFMT_ELF32 default y if MIPS32_O32 || MIPS32_N32 select ELFCORE -endmenu - menu "Power management options" config ARCH_HIBERNATION_POSSIBLE @@ -3205,20 +3191,6 @@ source "drivers/cpuidle/Kconfig" endmenu -source "net/Kconfig" - -source "drivers/Kconfig" - source "drivers/firmware/Kconfig" -source "fs/Kconfig" - -source "arch/mips/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" - source "arch/mips/kvm/Kconfig" |