summaryrefslogtreecommitdiff
path: root/arch/cris
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris')
-rw-r--r--arch/cris/Kconfig6
-rw-r--r--arch/cris/arch-v10/kernel/irq.c2
-rw-r--r--arch/cris/arch-v10/kernel/process.c2
-rw-r--r--arch/cris/arch-v10/kernel/time.c1
-rw-r--r--arch/cris/arch-v32/Kconfig2
-rw-r--r--arch/cris/arch-v32/boot/compressed/Makefile6
-rw-r--r--arch/cris/arch-v32/drivers/Kconfig2
-rw-r--r--arch/cris/arch-v32/kernel/irq.c2
-rw-r--r--arch/cris/arch-v32/kernel/process.c2
-rw-r--r--arch/cris/arch-v32/kernel/smp.c11
-rw-r--r--arch/cris/arch-v32/kernel/time.c1
-rw-r--r--arch/cris/arch-v32/mach-fs/Kconfig2
-rw-r--r--arch/cris/arch-v32/mm/tlb.c2
-rw-r--r--arch/cris/include/arch-v32/arch/spinlock.h2
-rw-r--r--arch/cris/include/asm/ftrace.h1
-rw-r--r--arch/cris/include/asm/ioctls.h5
-rw-r--r--arch/cris/include/asm/rs485.h8
-rw-r--r--arch/cris/include/asm/termios.h1
-rw-r--r--arch/cris/kernel/process.c1
-rw-r--r--arch/cris/kernel/setup.c2
-rw-r--r--arch/cris/mm/init.c3
21 files changed, 31 insertions, 33 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 3462245fe9fb..7adac388a771 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -438,7 +438,7 @@ config ETRAX_SERIAL_PORT0_DMA1_IN
help
Enables the DMA1 input channel for ser0 (ttyS0).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
@@ -565,7 +565,7 @@ config ETRAX_SERIAL_PORT2_DMA7_IN
help
Enables the DMA7 input channel for ser2 (ttyS2).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
@@ -604,7 +604,7 @@ config ETRAX_SERIAL_PORT3_DMA3_IN
help
Enables the DMA3 input channel for ser3 (ttyS3).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
index 65ed803dae6f..5d75f77f9c73 100644
--- a/arch/cris/arch-v10/kernel/irq.c
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -132,7 +132,7 @@ static void end_crisv10_irq(unsigned int irq)
{
}
-static struct hw_interrupt_type crisv10_irq_type = {
+static struct irq_chip crisv10_irq_type = {
.typename = "CRISv10",
.startup = startup_crisv10_irq,
.shutdown = shutdown_crisv10_irq,
diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c
index bd9b3ff63f6c..c4c69cf721e5 100644
--- a/arch/cris/arch-v10/kernel/process.c
+++ b/arch/cris/arch-v10/kernel/process.c
@@ -115,7 +115,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
*/
asmlinkage void ret_from_fork(void);
-int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
struct task_struct *p, struct pt_regs *regs)
{
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index c685ba4c3387..2b73c7a5b649 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -261,7 +261,6 @@ timer_interrupt(int irq, void *dev_id)
static struct irqaction irq2 = {
.handler = timer_interrupt,
.flags = IRQF_SHARED | IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
.name = "timer",
};
diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig
index 005ed2b3f7f4..21bbd93be34f 100644
--- a/arch/cris/arch-v32/Kconfig
+++ b/arch/cris/arch-v32/Kconfig
@@ -28,7 +28,7 @@ config ETRAX_NBR_LED_GRP_ONE
help
Select this if you want one Ethernet LED group. This LED group
can be used for one or more Ethernet interfaces. However, it is
- recomended that each Ethernet interface use a dedicated LED group.
+ recommended that each Ethernet interface use a dedicated LED group.
config ETRAX_NBR_LED_GRP_TWO
bool "Use two LED groups"
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
index 5a1b31c99eaa..e176b8b69d92 100644
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ b/arch/cris/arch-v32/boot/compressed/Makefile
@@ -2,9 +2,9 @@
# arch/cris/arch-v32/boot/compressed/Makefile
#
-asflags-y += -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
-ccflags-y += -O2 -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
+asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
+ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
+ldflags-y += -T$(srctree)/$(src)/decompress.lds
OBJECTS = $(obj)/head.o $(obj)/misc.o
OBJCOPYFLAGS = -O binary --remove-section=.bss
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 7a64fcef9d07..b9e328e688be 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -342,7 +342,7 @@ config ETRAX_SERIAL_PORT4_DMA9_IN
help
Enables the DMA9 input channel for ser4 (ttyS4).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 295131fee710..df3925cb1c7f 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -333,7 +333,7 @@ void set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
spin_unlock_irqrestore(&irq_lock, flags);
}
-static struct hw_interrupt_type crisv32_irq_type = {
+static struct irq_chip crisv32_irq_type = {
.typename = "CRISv32",
.startup = startup_crisv32_irq,
.shutdown = shutdown_crisv32_irq,
diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c
index ced5b725d9bd..120e7f796fea 100644
--- a/arch/cris/arch-v32/kernel/process.c
+++ b/arch/cris/arch-v32/kernel/process.c
@@ -131,7 +131,7 @@ kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
extern asmlinkage void ret_from_fork(void);
int
-copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
struct task_struct *p, struct pt_regs *regs)
{
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 9dac17334640..d2a3ff8c4d37 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -65,7 +65,6 @@ static int send_ipi(int vector, int wait, cpumask_t cpu_mask);
static struct irqaction irq_ipi = {
.handler = crisv32_ipi_interrupt,
.flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
.name = "ipi",
};
@@ -98,9 +97,9 @@ void __devinit smp_prepare_boot_cpu(void)
SUPP_BANK_SEL(2);
SUPP_REG_WR(RW_MM_TLB_PGD, pgd);
- cpu_set(0, cpu_online_map);
+ set_cpu_online(0, true);
cpu_set(0, phys_cpu_present_map);
- cpu_set(0, cpu_possible_map);
+ set_cpu_possible(0, true);
}
void __init smp_cpus_done(unsigned int max_cpus)
@@ -232,7 +231,7 @@ void flush_tlb_common(struct mm_struct* mm, struct vm_area_struct* vma, unsigned
cpumask_t cpu_mask;
spin_lock_irqsave(&tlbstate_lock, flags);
- cpu_mask = (mm == FLUSH_ALL ? CPU_MASK_ALL : mm->cpu_vm_mask);
+ cpu_mask = (mm == FLUSH_ALL ? cpu_all_mask : *mm_cpumask(mm));
cpu_clear(smp_processor_id(), cpu_mask);
flush_mm = mm;
flush_vma = vma;
@@ -252,8 +251,8 @@ void flush_tlb_mm(struct mm_struct *mm)
__flush_tlb_mm(mm);
flush_tlb_common(mm, FLUSH_ALL, 0);
/* No more mappings in other CPUs */
- cpus_clear(mm->cpu_vm_mask);
- cpu_set(smp_processor_id(), mm->cpu_vm_mask);
+ cpumask_clear(mm_cpumask(mm));
+ cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
}
void flush_tlb_page(struct vm_area_struct *vma,
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index 3a13dd6e0a9a..65633d0dab86 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -267,7 +267,6 @@ timer_interrupt(int irq, void *dev_id)
static struct irqaction irq_timer = {
.handler = timer_interrupt,
.flags = IRQF_SHARED | IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
.name = "timer"
};
diff --git a/arch/cris/arch-v32/mach-fs/Kconfig b/arch/cris/arch-v32/mach-fs/Kconfig
index f6d74475f1c6..774de82abef6 100644
--- a/arch/cris/arch-v32/mach-fs/Kconfig
+++ b/arch/cris/arch-v32/mach-fs/Kconfig
@@ -59,7 +59,7 @@ config ETRAX_SDRAM_GRP1_CONFIG
depends on ETRAX_ARCH_V32
default "0"
help
- SDRAM configuration for group 1. The defult value is 0
+ SDRAM configuration for group 1. The default value is 0
because group 1 is not used in the default configuration,
described in the help for SDRAM_GRP0_CONFIG.
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index 55ade36fe8a8..6779bcb28ab0 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -185,7 +185,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
/* Make sure there is a MMU context. */
spin_lock(&mmu_context_lock);
get_mmu_context(next);
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_set_cpu(cpu, mm_cpumask(next));
spin_unlock(&mmu_context_lock);
/*
diff --git a/arch/cris/include/arch-v32/arch/spinlock.h b/arch/cris/include/arch-v32/arch/spinlock.h
index 0d5709b983a1..129756b96661 100644
--- a/arch/cris/include/arch-v32/arch/spinlock.h
+++ b/arch/cris/include/arch-v32/arch/spinlock.h
@@ -121,6 +121,8 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw)
return 1;
}
+#define _raw_read_lock_flags(lock, flags) _raw_read_lock(lock)
+#define _raw_write_lock_flags(lock, flags) _raw_write_lock(lock)
#define _raw_spin_relax(lock) cpu_relax()
#define _raw_read_relax(lock) cpu_relax()
diff --git a/arch/cris/include/asm/ftrace.h b/arch/cris/include/asm/ftrace.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/cris/include/asm/ftrace.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/cris/include/asm/ioctls.h b/arch/cris/include/asm/ioctls.h
index 4f4e52531fa0..35bbc181598a 100644
--- a/arch/cris/include/asm/ioctls.h
+++ b/arch/cris/include/asm/ioctls.h
@@ -74,8 +74,9 @@
#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
#define FIOQSIZE 0x5460
-#define TIOCSERSETRS485 0x5461 /* enable rs-485 */
-#define TIOCSERWRRS485 0x5462 /* write rs-485 */
+#define TIOCSERSETRS485 0x5461 /* enable rs-485 (deprecated) */
+#define TIOCSERWRRS485 0x5462 /* write rs-485 */
+#define TIOCSRS485 0x5463 /* enable rs-485 */
/* Used for packet mode */
#define TIOCPKT_DATA 0
diff --git a/arch/cris/include/asm/rs485.h b/arch/cris/include/asm/rs485.h
index c331c51b0c2b..ad40f9fbcb8a 100644
--- a/arch/cris/include/asm/rs485.h
+++ b/arch/cris/include/asm/rs485.h
@@ -1,15 +1,13 @@
/* RS-485 structures */
-/* RS-485 support */
-/* Used with ioctl() TIOCSERSETRS485 */
+/* Used with ioctl() TIOCSERSETRS485 for backward compatibility!
+ * XXX: Do not use it for new code!
+ */
struct rs485_control {
unsigned short rts_on_send;
unsigned short rts_after_sent;
unsigned long delay_rts_before_send;
unsigned short enabled;
-#ifdef __KERNEL__
- int disable_serial_loopback;
-#endif
};
/* Used with ioctl() TIOCSERWRRS485 */
diff --git a/arch/cris/include/asm/termios.h b/arch/cris/include/asm/termios.h
index b0124e6c2e41..1265109f4ce3 100644
--- a/arch/cris/include/asm/termios.h
+++ b/arch/cris/include/asm/termios.h
@@ -4,6 +4,7 @@
#include <asm/termbits.h>
#include <asm/ioctls.h>
#include <asm/rs485.h>
+#include <linux/serial.h>
struct winsize {
unsigned short ws_row;
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index 60816e876455..4df0b320d524 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -19,7 +19,6 @@
#include <asm/system.h>
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <linux/fs_struct.h>
#include <linux/init_task.h>
#include <linux/sched.h>
#include <linux/fs.h>
diff --git a/arch/cris/kernel/setup.c b/arch/cris/kernel/setup.c
index 04d48dd91ddf..b712f4934c4b 100644
--- a/arch/cris/kernel/setup.c
+++ b/arch/cris/kernel/setup.c
@@ -166,7 +166,7 @@ void __init setup_arch(char **cmdline_p)
static void *c_start(struct seq_file *m, loff_t *pos)
{
- return *pos < NR_CPUS ? (void *)(int)(*pos + 1): NULL;
+ return *pos < nr_cpu_ids ? (void *)(int)(*pos + 1) : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
index 2fdd212eb250..514f46a4b230 100644
--- a/arch/cris/mm/init.c
+++ b/arch/cris/mm/init.c
@@ -25,8 +25,7 @@ mem_init(void)
int codesize, reservedpages, datasize, initsize;
unsigned long tmp;
- if(!mem_map)
- BUG();
+ BUG_ON(!mem_map);
/* max/min_low_pfn was set by setup.c
* now we just copy it to some other necessary places...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 00:01:07 +0300