diff options
Diffstat (limited to 'arch/blackfin/mach-bf561/boards/ezkit.c')
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/ezkit.c | 688 |
1 files changed, 0 insertions, 688 deletions
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c deleted file mode 100644 index acc5363f60c6..000000000000 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ /dev/null @@ -1,688 +0,0 @@ -/* - * Copyright 2004-2009 Analog Devices Inc. - * 2005 National ICT Australia (NICTA) - * Aidan Williams <aidan@nicta.com.au> - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/spi.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/gpio/machine.h> -#include <asm/dma.h> -#include <asm/bfin5xx_spi.h> -#include <asm/portmux.h> -#include <asm/dpmc.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "ADI BF561-EZKIT"; - -#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) -#include <linux/usb/isp1760.h> -static struct resource bfin_isp1760_resources[] = { - [0] = { - .start = 0x2C0F0000, - .end = 0x203C0000 + 0xfffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF10, - .end = IRQ_PF10, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct isp1760_platform_data isp1760_priv = { - .is_isp1761 = 0, - .bus_width_16 = 1, - .port1_otg = 0, - .analog_oc = 0, - .dack_polarity_high = 0, - .dreq_polarity_high = 0, -}; - -static struct platform_device bfin_isp1760_device = { - .name = "isp1760", - .id = 0, - .dev = { - .platform_data = &isp1760_priv, - }, - .num_resources = ARRAY_SIZE(bfin_isp1760_resources), - .resource = bfin_isp1760_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) -#include <linux/usb/isp1362.h> - -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x2c060000, - .end = 0x2c060000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x2c060004, - .end = 0x2c060004, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF8, - .end = IRQ_PF8, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_USB_NET2272) -static struct resource net2272_bfin_resources[] = { - { - .start = 0x2C000000, - .end = 0x2C000000 + 0x7F, - .flags = IORESOURCE_MEM, - }, { - .start = 1, - .flags = IORESOURCE_BUS, - }, { - .start = IRQ_PF10, - .end = IRQ_PF10, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device net2272_bfin_device = { - .name = "net2272", - .id = -1, - .num_resources = ARRAY_SIZE(net2272_bfin_resources), - .resource = net2272_bfin_resources, -}; -#endif - -/* - * USB-LAN EzExtender board - * Driver needs to know address, irq and flag pin. - */ -#if IS_ENABLED(CONFIG_SMC91X) -#include <linux/smc91x.h> - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | - SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - { - .name = "smc91x-regs", - .start = 0x2C010300, - .end = 0x2C010300 + 16, - .flags = IORESOURCE_MEM, - }, { - - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev = { - .platform_data = &smc91x_info, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 -static struct resource bfin_uart0_resources[] = { - { - .start = BFIN_UART_THR, - .end = BFIN_UART_GCTL+2, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART_TX, - .end = IRQ_UART_TX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART_RX, - .end = IRQ_UART_RX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART_ERROR, - .end = IRQ_UART_ERROR, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART_TX, - .end = CH_UART_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = CH_UART_RX, - .end = CH_UART_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static unsigned short bfin_uart0_peripherals[] = { - P_UART0_TX, P_UART0_RX, 0 -}; - -static struct platform_device bfin_uart0_device = { - .name = "bfin-uart", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_uart0_resources), - .resource = bfin_uart0_resources, - .dev = { - .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ - }, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_MTD_PHYSMAP) -static struct mtd_partition ezkit_partitions[] = { - { - .name = "bootloader(nor)", - .size = 0x40000, - .offset = 0, - }, { - .name = "linux kernel(nor)", - .size = 0x1C0000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "file system(nor)", - .size = 0x800000 - 0x40000 - 0x1C0000 - 0x2000 * 8, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "config(nor)", - .size = 0x2000 * 7, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "u-boot env(nor)", - .size = 0x2000, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct physmap_flash_data ezkit_flash_data = { - .width = 2, - .parts = ezkit_partitions, - .nr_parts = ARRAY_SIZE(ezkit_partitions), -}; - -static struct resource ezkit_flash_resource = { - .start = 0x20000000, - .end = 0x207fffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ezkit_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ezkit_flash_data, - }, - .num_resources = 1, - .resource = &ezkit_flash_resource, -}; -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) -/* SPI (0) */ -static struct resource bfin_spi0_resource[] = { - [0] = { - .start = SPI0_REGBASE, - .end = SPI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CH_SPI, - .end = CH_SPI, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = IRQ_SPI, - .end = IRQ_SPI, - .flags = IORESOURCE_IRQ, - } -}; - -/* SPI controller data */ -static struct bfin5xx_spi_master bfin_spi0_info = { - .num_chipselect = 8, - .enable_dma = 1, /* master has the ability to do dma transfer */ - .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, -}; - -static struct platform_device bfin_spi0_device = { - .name = "bfin-spi", - .id = 0, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_spi0_resource), - .resource = bfin_spi0_resource, - .dev = { - .platform_data = &bfin_spi0_info, /* Passed to driver */ - }, -}; -#endif - -static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) - { - .modalias = "ad183x", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 4, - .platform_data = "ad1836", /* only includes chip name for the moment */ - .mode = SPI_MODE_3, - }, -#endif -#if IS_ENABLED(CONFIG_SPI_SPIDEV) - { - .modalias = "spidev", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - }, -#endif -}; - -#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) -#include <linux/input.h> -#include <linux/gpio_keys.h> - -static struct gpio_keys_button bfin_gpio_keys_table[] = { - {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"}, - {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"}, - {BTN_2, GPIO_PF7, 1, "gpio-keys: BTN2"}, - {BTN_3, GPIO_PF8, 1, "gpio-keys: BTN3"}, -}; - -static struct gpio_keys_platform_data bfin_gpio_keys_data = { - .buttons = bfin_gpio_keys_table, - .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), -}; - -static struct platform_device bfin_device_gpiokeys = { - .name = "gpio-keys", - .dev = { - .platform_data = &bfin_gpio_keys_data, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_I2C_GPIO) -#include <linux/i2c-gpio.h> - -static struct gpiod_lookup_table bfin_i2c_gpiod_table = { - .dev_id = "i2c-gpio", - .table = { - GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF1, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF0, NULL, 1, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - }, -}; - -static struct i2c_gpio_platform_data i2c_gpio_data = { - .udelay = 10, -}; - -static struct platform_device i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &i2c_gpio_data, - }, -}; -#endif - -static const unsigned int cclk_vlev_datasheet[] = -{ - VRPAIR(VLEV_085, 250000000), - VRPAIR(VLEV_090, 300000000), - VRPAIR(VLEV_095, 313000000), - VRPAIR(VLEV_100, 350000000), - VRPAIR(VLEV_105, 400000000), - VRPAIR(VLEV_110, 444000000), - VRPAIR(VLEV_115, 450000000), - VRPAIR(VLEV_120, 475000000), - VRPAIR(VLEV_125, 500000000), - VRPAIR(VLEV_130, 600000000), -}; - -static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { - .tuple_tab = cclk_vlev_datasheet, - .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), - .vr_settling_time = 25 /* us */, -}; - -static struct platform_device bfin_dpmc = { - .name = "bfin dpmc", - .dev = { - .platform_data = &bfin_dmpc_vreg_data, - }, -}; - -#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) -#include <linux/videodev2.h> -#include <media/blackfin/bfin_capture.h> -#include <media/blackfin/ppi.h> - -static const unsigned short ppi_req[] = { - P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, - P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, - P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, - 0, -}; - -static const struct ppi_info ppi_info = { - .type = PPI_TYPE_PPI, - .dma_ch = CH_PPI0, - .irq_err = IRQ_PPI1_ERROR, - .base = (void __iomem *)PPI0_CONTROL, - .pin_req = ppi_req, -}; - -#if IS_ENABLED(CONFIG_VIDEO_ADV7183) -#include <media/i2c/adv7183.h> -static struct v4l2_input adv7183_inputs[] = { - { - .index = 0, - .name = "Composite", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = V4L2_STD_ALL, - .capabilities = V4L2_IN_CAP_STD, - }, - { - .index = 1, - .name = "S-Video", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = V4L2_STD_ALL, - .capabilities = V4L2_IN_CAP_STD, - }, - { - .index = 2, - .name = "Component", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = V4L2_STD_ALL, - .capabilities = V4L2_IN_CAP_STD, - }, -}; - -static struct bcap_route adv7183_routes[] = { - { - .input = ADV7183_COMPOSITE4, - .output = ADV7183_8BIT_OUT, - }, - { - .input = ADV7183_SVIDEO0, - .output = ADV7183_8BIT_OUT, - }, - { - .input = ADV7183_COMPONENT0, - .output = ADV7183_8BIT_OUT, - }, -}; - - -static const unsigned adv7183_gpio[] = { - GPIO_PF13, /* reset pin */ - GPIO_PF2, /* output enable pin */ -}; - -static struct bfin_capture_config bfin_capture_data = { - .card_name = "BF561", - .inputs = adv7183_inputs, - .num_inputs = ARRAY_SIZE(adv7183_inputs), - .routes = adv7183_routes, - .i2c_adapter_id = 0, - .board_info = { - .type = "adv7183", - .addr = 0x20, - .platform_data = (void *)adv7183_gpio, - }, - .ppi_info = &ppi_info, - .ppi_control = (PACK_EN | DLEN_8 | DMA32 | FLD_SEL), -}; -#endif - -static struct platform_device bfin_capture_device = { - .name = "bfin_capture", - .dev = { - .platform_data = &bfin_capture_data, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) -static struct platform_device bfin_i2s = { - .name = "bfin-i2s", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) -static struct platform_device bfin_ac97 = { - .name = "bfin-ac97", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) -static const char * const ad1836_link[] = { - "bfin-i2s.0", - "spi0.4", -}; -static struct platform_device bfin_ad1836_machine = { - .name = "bfin-snd-ad1836", - .id = -1, - .dev = { - .platform_data = (void *)ad1836_link, - }, -}; -#endif - -static struct platform_device *ezkit_devices[] __initdata = { - - &bfin_dpmc, - -#if IS_ENABLED(CONFIG_SMC91X) - &smc91x_device, -#endif - -#if IS_ENABLED(CONFIG_USB_NET2272) - &net2272_bfin_device, -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) - &bfin_isp1760_device, -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) - &bfin_spi0_device, -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) - &bfin_device_gpiokeys, -#endif - -#if IS_ENABLED(CONFIG_I2C_GPIO) - &i2c_gpio_device, -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) - &isp1362_hcd_device, -#endif - -#if IS_ENABLED(CONFIG_MTD_PHYSMAP) - &ezkit_flash_device, -#endif - -#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) - &bfin_capture_device, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) - &bfin_i2s, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) - &bfin_ac97, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) - &bfin_ad1836_machine, -#endif -}; - -static int __init net2272_init(void) -{ -#if IS_ENABLED(CONFIG_USB_NET2272) - int ret; - - ret = gpio_request(GPIO_PF11, "net2272"); - if (ret) - return ret; - - /* Reset the USB chip */ - gpio_direction_output(GPIO_PF11, 0); - mdelay(2); - gpio_set_value(GPIO_PF11, 1); -#endif - - return 0; -} - -static int __init ezkit_init(void) -{ - int ret; - - printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#if IS_ENABLED(CONFIG_I2C_GPIO) - gpiod_add_lookup_table(&bfin_i2c_gpiod_table); -#endif - ret = platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); - if (ret < 0) - return ret; - -#if IS_ENABLED(CONFIG_SMC91X) - bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12)); - SSYNC(); -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) - bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15)); - bfin_write_FIO0_FLAG_S(1 << 15); - SSYNC(); - /* - * This initialization lasts for approximately 4500 MCLKs. - * MCLK = 12.288MHz - */ - udelay(400); -#endif - - if (net2272_init()) - pr_warning("unable to configure net2272; it probably won't work\n"); - - spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - return 0; -} - -arch_initcall(ezkit_init); - -static struct platform_device *ezkit_early_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif -}; - -void __init native_machine_early_platform_add_devices(void) -{ - printk(KERN_INFO "register early platform devices\n"); - early_platform_add_devices(ezkit_early_devices, - ARRAY_SIZE(ezkit_early_devices)); -} |