diff options
Diffstat (limited to 'arch/blackfin/mach-bf533/boards/H8606.c')
| -rw-r--r-- | arch/blackfin/mach-bf533/boards/H8606.c | 452 |
1 files changed, 0 insertions, 452 deletions
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c deleted file mode 100644 index 01300f40db15..000000000000 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ /dev/null @@ -1,452 +0,0 @@ -/* - * Copyright 2004-2009 Analog Devices Inc. - * 2007-2008 HV Sistemas S.L. - * Javier Herrero <jherrero@hvsistemas.es> - * 2005 National ICT Australia (NICTA) - * Aidan Williams <aidan@nicta.com.au> - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) -#include <linux/usb/isp1362.h> -#endif -#include <linux/irq.h> - -#include <asm/dma.h> -#include <asm/bfin5xx_spi.h> -#include <asm/reboot.h> -#include <asm/portmux.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "HV Sistemas H8606"; - -#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) -static struct platform_device rtc_device = { - .name = "rtc-bfin", - .id = -1, -}; -#endif - -/* -* Driver needs to know address, irq and flag pin. - */ -#if IS_ENABLED(CONFIG_DM9000) -static struct resource dm9000_resources[] = { - [0] = { - .start = 0x20300000, - .end = 0x20300002, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x20300004, - .end = 0x20300006, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_PF10, - .end = IRQ_PF10, - .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_SHAREABLE), - }, -}; - -static struct platform_device dm9000_device = { - .id = 0, - .name = "dm9000", - .resource = dm9000_resources, - .num_resources = ARRAY_SIZE(dm9000_resources), -}; -#endif - -#if IS_ENABLED(CONFIG_SMC91X) -#include <linux/smc91x.h> - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - { - .name = "smc91x-regs", - .start = 0x20300300, - .end = 0x20300300 + 16, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev = { - .platform_data = &smc91x_info, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_USB_NET2272) -static struct resource net2272_bfin_resources[] = { - { - .start = 0x20300000, - .end = 0x20300000 + 0x100, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF10, - .end = IRQ_PF10, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device net2272_bfin_device = { - .name = "net2272", - .id = -1, - .num_resources = ARRAY_SIZE(net2272_bfin_resources), - .resource = net2272_bfin_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) -/* all SPI peripherals info goes here */ - -#if IS_ENABLED(CONFIG_MTD_M25P80) -static struct mtd_partition bfin_spi_flash_partitions[] = { - { - .name = "bootloader (spi)", - .size = 0x40000, - .offset = 0, - .mask_flags = MTD_CAP_ROM - }, { - .name = "fpga (spi)", - .size = 0x30000, - .offset = 0x40000 - }, { - .name = "linux kernel (spi)", - .size = 0x150000, - .offset = 0x70000 - }, { - .name = "jffs2 root file system (spi)", - .size = 0x640000, - .offset = 0x1c0000, - } -}; - -static struct flash_platform_data bfin_spi_flash_data = { - .name = "m25p80", - .parts = bfin_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), - .type = "m25p64", -}; - -/* SPI flash chip (m25p64) */ -static struct bfin5xx_spi_chip spi_flash_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ -}; -#endif - -/* Notice: for blackfin, the speed_hz is the value of register - * SPI_BAUD, not the real baudrate */ -static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if IS_ENABLED(CONFIG_MTD_M25P80) - { - /* the modalias must be the same as spi device driver name */ - .modalias = "m25p80", /* Name of spi_driver for this device */ - /* this value is the baudrate divisor */ - .max_speed_hz = 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/ - .platform_data = &bfin_spi_flash_data, - .controller_data = &spi_flash_chip_info, - .mode = SPI_MODE_3, - }, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) - { - .modalias = "ad183x", - .max_speed_hz = 16, - .bus_num = 1, - .chip_select = 4, - }, -#endif - -}; - -/* SPI (0) */ -static struct resource bfin_spi0_resource[] = { - [0] = { - .start = SPI0_REGBASE, - .end = SPI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CH_SPI, - .end = CH_SPI, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = IRQ_SPI, - .end = IRQ_SPI, - .flags = IORESOURCE_IRQ, - } -}; - - -/* SPI controller data */ -static struct bfin5xx_spi_master bfin_spi0_info = { - .num_chipselect = 8, - .enable_dma = 1, /* master has the ability to do dma transfer */ - .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, -}; - -static struct platform_device bfin_spi0_device = { - .name = "bfin-spi", - .id = 0, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_spi0_resource), - .resource = bfin_spi0_resource, - .dev = { - .platform_data = &bfin_spi0_info, /* Passed to driver */ - }, -}; -#endif /* spi master and devices */ - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 -static struct resource bfin_uart0_resources[] = { - { - .start = BFIN_UART_THR, - .end = BFIN_UART_GCTL+2, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_TX, - .end = IRQ_UART0_TX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART0_ERROR, - .end = IRQ_UART0_ERROR, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_TX, - .end = CH_UART0_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static unsigned short bfin_uart0_peripherals[] = { - P_UART0_TX, P_UART0_RX, 0 -}; - -static struct platform_device bfin_uart0_device = { - .name = "bfin-uart", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_uart0_resources), - .resource = bfin_uart0_resources, - .dev = { - .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ - }, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_SERIAL_8250) - -#include <linux/serial_8250.h> -#include <linux/serial.h> - -/* - * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010. - * running at half system clock, both with interrupt output or-ed to PF8. Change to - * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus - */ - -static struct plat_serial8250_port serial8250_platform_data [] = { - { - .membase = (void *)0x20200000, - .mapbase = 0x20200000, - .irq = IRQ_PF8, - .irqflags = IRQF_TRIGGER_HIGH, - .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 66666667, - }, { - .membase = (void *)0x20200010, - .mapbase = 0x20200010, - .irq = IRQ_PF8, - .irqflags = IRQF_TRIGGER_HIGH, - .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = 66666667, - }, { - } -}; - -static struct platform_device serial8250_device = { - .id = PLAT8250_DEV_PLATFORM, - .name = "serial8250", - .dev = { - .platform_data = serial8250_platform_data, - }, -}; - -#endif - -#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES) - -/* - * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030, - * interrupt output wired to PF9. Change to suit different FPGA configuration - */ - -static struct resource opencores_kbd_resources[] = { - [0] = { - .start = 0x20200030, - .end = 0x20300030 + 2, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device opencores_kbd_device = { - .id = -1, - .name = "opencores-kbd", - .resource = opencores_kbd_resources, - .num_resources = ARRAY_SIZE(opencores_kbd_resources), -}; -#endif - -static struct platform_device *h8606_devices[] __initdata = { -#if IS_ENABLED(CONFIG_RTC_DRV_BFIN) - &rtc_device, -#endif - -#if IS_ENABLED(CONFIG_DM9000) - &dm9000_device, -#endif - -#if IS_ENABLED(CONFIG_SMC91X) - &smc91x_device, -#endif - -#if IS_ENABLED(CONFIG_USB_NET2272) - &net2272_bfin_device, -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) - &bfin_spi0_device, -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_SERIAL_8250) - &serial8250_device, -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES) - &opencores_kbd_device, -#endif -}; - -static int __init H8606_init(void) -{ - printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); - printk(KERN_INFO "%s(): registering device resources\n", __func__); - platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) - spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); -#endif - return 0; -} - -arch_initcall(H8606_init); - -static struct platform_device *H8606_early_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif -}; - -void __init native_machine_early_platform_add_devices(void) -{ - printk(KERN_INFO "register early platform devices\n"); - early_platform_add_devices(H8606_early_devices, - ARRAY_SIZE(H8606_early_devices)); -} |