diff options
Diffstat (limited to 'arch/blackfin/include/asm/bfin_twi.h')
| -rw-r--r-- | arch/blackfin/include/asm/bfin_twi.h | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h index e767d649dfc4..2f3339a47626 100644 --- a/arch/blackfin/include/asm/bfin_twi.h +++ b/arch/blackfin/include/asm/bfin_twi.h @@ -10,6 +10,7 @@ #define __ASM_BFIN_TWI_H__ #include <linux/types.h> +#include <linux/i2c.h> /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -42,4 +43,145 @@ struct bfin_twi_regs { #undef __BFP +struct bfin_twi_iface { + int irq; + spinlock_t lock; + char read_write; + u8 command; + u8 *transPtr; + int readNum; + int writeNum; + int cur_mode; + int manual_stop; + int result; + struct i2c_adapter adap; + struct completion complete; + struct i2c_msg *pmsg; + int msg_num; + int cur_msg; + u16 saved_clkdiv; + u16 saved_control; + struct bfin_twi_regs *regs_base; +}; + +#define DEFINE_TWI_REG(reg_name, reg) \ +static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \ + { return iface->regs_base->reg; } \ +static inline void write_##reg_name(struct bfin_twi_iface *iface, u16 v) \ + { iface->regs_base->reg = v; } + +DEFINE_TWI_REG(CLKDIV, clkdiv) +DEFINE_TWI_REG(CONTROL, control) +DEFINE_TWI_REG(SLAVE_CTL, slave_ctl) +DEFINE_TWI_REG(SLAVE_STAT, slave_stat) +DEFINE_TWI_REG(SLAVE_ADDR, slave_addr) +DEFINE_TWI_REG(MASTER_CTL, master_ctl) +DEFINE_TWI_REG(MASTER_STAT, master_stat) +DEFINE_TWI_REG(MASTER_ADDR, master_addr) +DEFINE_TWI_REG(INT_STAT, int_stat) +DEFINE_TWI_REG(INT_MASK, int_mask) +DEFINE_TWI_REG(FIFO_CTL, fifo_ctl) +DEFINE_TWI_REG(FIFO_STAT, fifo_stat) +DEFINE_TWI_REG(XMT_DATA8, xmt_data8) +DEFINE_TWI_REG(XMT_DATA16, xmt_data16) +#if !ANOMALY_05001001 +DEFINE_TWI_REG(RCV_DATA8, rcv_data8) +DEFINE_TWI_REG(RCV_DATA16, rcv_data16) +#else +static inline u16 read_RCV_DATA8(struct bfin_twi_iface *iface) +{ + u16 ret; + unsigned long flags; + + flags = hard_local_irq_save(); + ret = iface->regs_base->rcv_data8; + hard_local_irq_restore(flags); + + return ret; +} + +static inline u16 read_RCV_DATA16(struct bfin_twi_iface *iface) +{ + u16 ret; + unsigned long flags; + + flags = hard_local_irq_save(); + ret = iface->regs_base->rcv_data16; + hard_local_irq_restore(flags); + + return ret; +} +#endif + + +/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Address Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + #endif |