diff options
Diffstat (limited to 'arch/arm')
137 files changed, 1659 insertions, 678 deletions
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig index 764732529ea3..e8f7380b67d6 100644 --- a/arch/arm/configs/ams_delta_defconfig +++ b/arch/arm/configs/ams_delta_defconfig @@ -55,10 +55,10 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -# CONFIG_EMBEDDED is not set +CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS is not set # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -224,7 +224,7 @@ CONFIG_CPU_CP15_MMU=y # # Processor Features # -# CONFIG_ARM_THUMB is not set +CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_CPU_DCACHE_WRITETHROUGH=y @@ -248,7 +248,7 @@ CONFIG_CPU_DCACHE_WRITETHROUGH=y # CONFIG_HIGH_RES_TIMERS is not set CONFIG_PREEMPT=y CONFIG_HZ=100 -# CONFIG_AEABI is not set +CONFIG_AEABI=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -299,7 +299,9 @@ CONFIG_BINFMT_ELF=y # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_SUSPEND is not set +CONFIG_PM_RUNTIME=y # # Networking @@ -670,7 +672,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -784,6 +786,7 @@ CONFIG_I2C_OMAP=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +CONFIG_GPIO_SYSFS=y # # Dallas's 1-wire bus @@ -820,6 +823,7 @@ CONFIG_LEDS_AMS_DELTA=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # Multimedia devices @@ -896,7 +900,13 @@ CONFIG_LOGO_LINUX_CLUT224=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_AMS_DELTA=y # # HID Devices diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index af74cc2de8b6..bcfade33bca9 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc4 -# Mon May 4 11:58:57 2009 +# Linux kernel version: 2.6.32-rc6 +# Sat Nov 7 20:31:18 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=19 # CONFIG_GROUP_SCHED is not set @@ -73,7 +71,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -86,6 +83,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -95,13 +96,17 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -114,7 +119,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -135,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -156,25 +164,27 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set CONFIG_ARCH_KIRKWOOD=y -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set # # Marvell Kirkwood Implementations @@ -185,6 +195,7 @@ CONFIG_MACH_RD88F6281=y CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_TS219=y +CONFIG_MACH_OPENRD_BASE=y CONFIG_PLAT_ORION=y # @@ -195,7 +206,7 @@ CONFIG_CPU_FEROCEON=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_FEROCEON=y CONFIG_CPU_TLB_FEROCEON=y @@ -211,6 +222,7 @@ CONFIG_ARM_THUMB=y CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 # # Bus support @@ -235,11 +247,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -254,10 +267,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +CONFIG_UACCESS_WITH_MEMCPY=y # # Boot options @@ -345,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -367,6 +383,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,17 +400,18 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y - -# -# Rate control algorithm selection -# CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -414,6 +432,7 @@ CONFIG_MAC80211_RC_DEFAULT="minstrel" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -425,9 +444,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -494,6 +513,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DATAFLASH is not set CONFIG_MTD_M25P80=y CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -543,6 +563,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -567,10 +588,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -587,6 +604,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -595,6 +614,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -611,7 +631,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -623,11 +642,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -649,6 +671,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -676,6 +699,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -693,13 +717,16 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -768,6 +795,9 @@ CONFIG_NET_PCI=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -789,6 +819,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -797,10 +828,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y @@ -820,9 +848,7 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_MAC80211_HWSIM is not set # CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set -# CONFIG_ATH5K is not set -# CONFIG_ATH9K is not set -# CONFIG_AR9170_USB is not set +# CONFIG_ATH_COMMON is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_IWLWIFI is not set @@ -832,6 +858,8 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set # CONFIG_HERMES is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -855,6 +883,7 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -878,13 +907,19 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -943,6 +978,7 @@ CONFIG_LEGACY_PTY_COUNT=16 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -998,10 +1034,6 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1023,11 +1055,47 @@ CONFIG_SPI_ORION=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1041,33 +1109,28 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1087,7 +1150,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1106,10 +1168,12 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1123,9 +1187,14 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y # CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y # CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -1150,18 +1219,21 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1252,11 +1324,14 @@ CONFIG_SDIO_UART=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_MVSDIO=y # CONFIG_MMC_SPI is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1266,7 +1341,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set @@ -1278,11 +1353,14 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1314,6 +1392,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1325,6 +1404,7 @@ CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1360,8 +1440,11 @@ CONFIG_DMA_ENGINE=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1379,10 +1462,13 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1455,7 +1541,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1530,6 +1615,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1547,6 +1633,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1567,12 +1654,14 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set @@ -1581,25 +1670,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1623,7 +1699,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1665,11 +1740,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1714,6 +1791,7 @@ CONFIG_CRYPTO_ARC4=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_MV_CESA=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_BINARY_PRINTF=y diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig index 8da75dede52e..264f52b5c52d 100644 --- a/arch/arm/configs/n8x0_defconfig +++ b/arch/arm/configs/n8x0_defconfig @@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0x10C08000 CONFIG_ZBOOT_ROM_BSS=0x10200000 # CONFIG_ZBOOT_ROM is not set -CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8" +CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig index b54ad2e2da36..150deafb0a6a 100644 --- a/arch/arm/configs/omap3_pandora_defconfig +++ b/arch/arm/configs/omap3_pandora_defconfig @@ -611,7 +611,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set @@ -634,7 +634,8 @@ CONFIG_TOUCHSCREEN_ADS7846=y # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_TWL4030_PWRBUTTON=y # # Hardware I/O ports @@ -834,7 +835,29 @@ CONFIG_DAB=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DRIVERS=y +CONFIG_SND_USB=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_TWL4030=y + CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -1020,7 +1043,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1084,9 +1113,12 @@ CONFIG_RTC_DRV_TWL4030=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_TWL4030=y + # # File systems # @@ -1407,3 +1439,10 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y + +# added by hand for now +CONFIG_KEYBOARD_TWL4030=y +CONFIG_USB_OTG_UTILS=y +CONFIG_TWL4030_USB=y +CONFIG_MMC_OMAP_HS=y + diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index 8a4a7e2ba87b..5a305f015307 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -1703,7 +1703,14 @@ CONFIG_RTC_DRV_TWL4030=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set # CONFIG_STAGING is not set diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 9e2385293ecb..5383cd0dff54 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc4 -# Mon May 4 14:07:25 2009 +# Linux kernel version: 2.6.32-rc6 +# Sat Nov 7 20:52:21 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -69,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -82,6 +79,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set @@ -91,13 +92,17 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y @@ -109,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -130,19 +135,22 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -151,25 +159,27 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set CONFIG_ARCH_ORION5X=y +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set # # Orion Implementations @@ -187,6 +197,9 @@ CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y CONFIG_MACH_EDMINI_V2=y +CONFIG_MACH_D2NET=y +CONFIG_MACH_BIGDISK=y +CONFIG_MACH_NET2BIG=y CONFIG_MACH_MSS2=y CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y @@ -202,7 +215,7 @@ CONFIG_CPU_FEROCEON=y CONFIG_CPU_FEROCEON_OLD_ID=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_FEROCEON=y CONFIG_CPU_TLB_FEROCEON=y @@ -215,7 +228,7 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 # # Bus support @@ -240,11 +253,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -259,12 +273,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y +CONFIG_UACCESS_WITH_MEMCPY=y # # Boot options @@ -308,6 +324,7 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -356,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -378,6 +396,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -394,11 +413,15 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -411,6 +434,7 @@ CONFIG_WIRELESS_EXT_SYSFS=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -422,9 +446,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -537,6 +561,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set @@ -552,7 +577,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -576,10 +603,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -596,6 +619,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -604,6 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -620,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -632,11 +657,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -658,6 +686,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -685,6 +714,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -703,13 +733,16 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -777,6 +810,8 @@ CONFIG_NET_PCI=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -798,6 +833,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -806,10 +842,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -835,6 +868,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -855,13 +889,19 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -912,6 +952,7 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -967,20 +1008,55 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1030,6 +1106,8 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1041,9 +1119,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1057,33 +1133,26 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +# CONFIG_VGA_ARB is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1097,7 +1166,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1116,10 +1184,11 @@ CONFIG_USB_HID=y # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1130,10 +1199,11 @@ CONFIG_USB_HID=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1160,18 +1230,21 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1248,7 +1321,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1258,7 +1330,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set @@ -1269,11 +1341,14 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1306,6 +1381,7 @@ CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1344,8 +1420,11 @@ CONFIG_DMA_ENGINE=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1358,10 +1437,10 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -# CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m @@ -1370,10 +1449,13 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1446,7 +1528,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1537,6 +1618,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1552,6 +1634,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1572,6 +1655,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set @@ -1579,6 +1663,7 @@ CONFIG_FRAME_POINTER=y # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y @@ -1587,25 +1672,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1629,20 +1701,19 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_ALGAPI2=m -CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_BLKCIPHER2=m -CONFIG_CRYPTO_HASH2=m -CONFIG_CRYPTO_RNG2=m -CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_MANAGER2=m +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set -CONFIG_CRYPTO_WORKQUEUE=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1670,11 +1741,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1691,7 +1764,7 @@ CONFIG_CRYPTO_PCBC=m # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -1719,6 +1792,7 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_MV_CESA=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_BINARY_PRINTF=y diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 7d61ae6e75da..953ba0297fc4 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc3 -# Thu Jul 16 23:36:10 2009 +# Linux kernel version: 2.6.32-rc5 +# Sat Oct 17 23:32:24 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -80,17 +81,15 @@ CONFIG_SHMEM=y # CONFIG_AIO is not set # -# Performance Counters +# Kernel Performance Events And Counters # # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set CONFIG_ARCH_U300=y # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set # # ST-Ericsson AB U300/U330/U335/U365 Platform @@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y CONFIG_MACH_U300_DUAL_RAM=y CONFIG_U300_DEBUG=y # CONFIG_MACH_U300_SEMI_IS_SHARED is not set +CONFIG_MACH_U300_SPIDUMMY=y # # All the settings below must match the bootloader's settings @@ -207,7 +211,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 CONFIG_COMMON_CLKDEV=y @@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set @@ -313,6 +321,7 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y @@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_NETDEVICES is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6387XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set CONFIG_AB3100_CORE=y +CONFIG_AB3100_OTP=y # CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set +CONFIG_REGULATOR_AB3100=y +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_ARMMMCI=y # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_HCTOSYS is not set # CONFIG_RTC_DEBUG is not set # @@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_AB3100=y # # on-CPU RTC drivers # # CONFIG_RTC_DRV_PL030 is not set # CONFIG_RTC_DRV_PL031 is not set +CONFIG_RTC_DRV_COH901331=y CONFIG_DMADEVICES=y # # DMA Devices # # CONFIG_AUXDISPLAY is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -913,6 +947,7 @@ CONFIG_REGULATOR=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index fd03fb63a332..9fd6d3ab68c0 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -331,15 +331,15 @@ static inline void outer_flush_range(unsigned long start, unsigned long end) * Convert calls to our calling convention. */ #define flush_cache_all() __cpuc_flush_kern_all() -#ifndef CONFIG_CPU_CACHE_VIPT -static inline void flush_cache_mm(struct mm_struct *mm) + +static inline void vivt_flush_cache_mm(struct mm_struct *mm) { if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) __cpuc_flush_user_all(); } static inline void -flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) +vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), @@ -347,7 +347,7 @@ flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long } static inline void -flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) +vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) { if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { unsigned long addr = user_addr & PAGE_MASK; @@ -356,7 +356,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned l } static inline void -flush_ptrace_access(struct vm_area_struct *vma, struct page *page, +vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page, unsigned long uaddr, void *kaddr, unsigned long len, int write) { @@ -365,6 +365,16 @@ flush_ptrace_access(struct vm_area_struct *vma, struct page *page, __cpuc_coherent_kern_range(addr, addr + len); } } + +#ifndef CONFIG_CPU_CACHE_VIPT +#define flush_cache_mm(mm) \ + vivt_flush_cache_mm(mm) +#define flush_cache_range(vma,start,end) \ + vivt_flush_cache_range(vma,start,end) +#define flush_cache_page(vma,addr,pfn) \ + vivt_flush_cache_page(vma,addr,pfn) +#define flush_ptrace_access(vma,page,ua,ka,len,write) \ + vivt_flush_ptrace_access(vma,page,ua,ka,len,write) #else extern void flush_cache_mm(struct mm_struct *mm); extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); @@ -410,13 +420,16 @@ extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, */ extern void flush_dcache_page(struct page *); -extern void __flush_dcache_page(struct address_space *mapping, struct page *page); - static inline void __flush_icache_all(void) { +#ifdef CONFIG_ARM_ERRATA_411920 + extern void v6_icache_inval_all(void); + v6_icache_inval_all(); +#else asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" : : "r" (0)); +#endif } #define ARCH_HAS_FLUSH_ANON_PAGE diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index c3b911ee9151..6aac3f5bb2f3 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *); extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int); #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk) +int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); +#define ELF_CORE_COPY_TASK_REGS dump_task_regs + #define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h index d16ec97ec9a9..c019949a5189 100644 --- a/arch/arm/include/asm/kmap_types.h +++ b/arch/arm/include/asm/kmap_types.h @@ -22,4 +22,10 @@ enum km_type { KM_TYPE_NR }; +#ifdef CONFIG_DEBUG_HIGHMEM +#define KM_NMI (-1) +#define KM_NMI_PTE (-1) +#define KM_IRQ_PTE (-1) +#endif + #endif diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index a45ab5dd8255..c2f1605de359 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_WB)) dsb(); - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) { + if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { if (tlb_flag(TLB_V3_FULL)) asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_U_FULL)) @@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_V4_I_FULL)) asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); } + put_cpu(); if (tlb_flag(TLB_V6_U_ASID)) asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc"); diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 7020217fc49f..4e506d09e5f9 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -403,6 +403,15 @@ #define __ARM_NR_set_tls (__ARM_NR_BASE+5) /* + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ +#ifdef __KERNEL__ +#define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0) +#endif + +/* * The following syscalls are obsolete and no longer available for EABI. */ #if defined(__ARM_EABI__) && !defined(__KERNEL__) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 322410be573c..d2903e3bc861 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -21,6 +21,7 @@ #include <mach/entry-macro.S> #include <asm/thread_notify.h> #include <asm/unwind.h> +#include <asm/unistd.h> #include "entry-header.S" @@ -608,33 +609,33 @@ call_fpe: THUMB( add pc, r8 ) nop - W(mov) pc, lr @ CP#0 + movw_pc lr @ CP#0 W(b) do_fpe @ CP#1 (FPE) W(b) do_fpe @ CP#2 (FPE) - W(mov) pc, lr @ CP#3 + movw_pc lr @ CP#3 #ifdef CONFIG_CRUNCH b crunch_task_enable @ CP#4 (MaverickCrunch) b crunch_task_enable @ CP#5 (MaverickCrunch) b crunch_task_enable @ CP#6 (MaverickCrunch) #else - W(mov) pc, lr @ CP#4 - W(mov) pc, lr @ CP#5 - W(mov) pc, lr @ CP#6 + movw_pc lr @ CP#4 + movw_pc lr @ CP#5 + movw_pc lr @ CP#6 #endif - W(mov) pc, lr @ CP#7 - W(mov) pc, lr @ CP#8 - W(mov) pc, lr @ CP#9 + movw_pc lr @ CP#7 + movw_pc lr @ CP#8 + movw_pc lr @ CP#9 #ifdef CONFIG_VFP W(b) do_vfp @ CP#10 (VFP) W(b) do_vfp @ CP#11 (VFP) #else - W(mov) pc, lr @ CP#10 (VFP) - W(mov) pc, lr @ CP#11 (VFP) + movw_pc lr @ CP#10 (VFP) + movw_pc lr @ CP#11 (VFP) #endif - W(mov) pc, lr @ CP#12 - W(mov) pc, lr @ CP#13 - W(mov) pc, lr @ CP#14 (Debug) - W(mov) pc, lr @ CP#15 (Control) + movw_pc lr @ CP#12 + movw_pc lr @ CP#13 + movw_pc lr @ CP#14 (Debug) + movw_pc lr @ CP#15 (Control) #ifdef CONFIG_NEON .align 6 @@ -908,10 +909,10 @@ __kuser_cmpxchg: @ 0xffff0fc0 * A special ghost syscall is used for that (see traps.c). */ stmfd sp!, {r7, lr} - mov r7, #0xff00 @ 0xfff0 into r7 for EABI - orr r7, r7, #0xf0 - swi #0x9ffff0 + ldr r7, =1f @ it's 20 bits + swi __ARM_NR_cmpxchg ldmfd sp!, {r7, pc} +1: .word __ARM_NR_cmpxchg #elif __LINUX_ARM_ARCH__ < 6 diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index ac34c0d9384b..7e9ed1eea40a 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -110,6 +110,13 @@ mov \rd, sp, lsr #13 mov \rd, \rd, lsl #13 .endm + + @ + @ 32-bit wide "mov pc, reg" + @ + .macro movw_pc, reg + mov pc, \reg + .endm #else /* CONFIG_THUMB2_KERNEL */ .macro svc_exit, rpsr clrex @ clear the exclusive monitor @@ -146,6 +153,14 @@ lsr \rd, \rd, #13 mov \rd, \rd, lsl #13 .endm + + @ + @ 32-bit wide "mov pc, reg" + @ + .macro movw_pc, reg + mov pc, \reg + nop + .endm #endif /* !CONFIG_THUMB2_KERNEL */ /* diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 885a7214418d..b9505aa267c0 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -97,7 +97,7 @@ __error_a: bl printhex8 adr r0, str_a2 bl printascii - adr r3, 3f + adr r3, 4f ldmia r3, {r4, r5, r6} @ get machine desc list sub r4, r3, r4 @ get offset between virt&phys add r5, r5, r4 @ convert virt addresses to diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 790fbee92ec5..0d96d0171c05 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -328,6 +328,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, } /* + * Fill in the task's elfregs structure for a core dump. + */ +int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs) +{ + elf_core_copy_regs(elfregs, task_pt_regs(t)); + return 1; +} + +/* * fill in the fpe structure for a core dump... */ int dump_fpu (struct pt_regs *regs, struct user_fp *fp) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 1423a3419789..e7714f367eb8 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/kernel/signal.c * - * Copyright (C) 1995-2002 Russell King + * Copyright (C) 1995-2009 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -29,6 +29,7 @@ */ #define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) #define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) +#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE) /* * With EABI, the syscall number has to be loaded into r7. @@ -49,6 +50,18 @@ const unsigned long sigreturn_codes[7] = { }; /* + * Either we support OABI only, or we have EABI with the OABI + * compat layer enabled. In the later case we don't know if + * user space is EABI or not, and if not we must not clobber r7. + * Always using the OABI syscall solves that issue and works for + * all those cases. + */ +const unsigned long syscall_restart_code[2] = { + SWI_SYS_RESTART, /* swi __NR_restart_syscall */ + 0xe49df004, /* ldr pc, [sp], #4 */ +}; + +/* * atomically swap in the new signal mask, and wait for a signal. */ asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask) @@ -645,32 +658,16 @@ static void do_signal(struct pt_regs *regs, int syscall) regs->ARM_pc -= 4; #else u32 __user *usp; - u32 swival = __NR_restart_syscall; - regs->ARM_sp -= 12; + regs->ARM_sp -= 4; usp = (u32 __user *)regs->ARM_sp; - /* - * Either we supports OABI only, or we have - * EABI with the OABI compat layer enabled. - * In the later case we don't know if user - * space is EABI or not, and if not we must - * not clobber r7. Always using the OABI - * syscall solves that issue and works for - * all those cases. - */ - swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE; - - put_user(regs->ARM_pc, &usp[0]); - /* swi __NR_restart_syscall */ - put_user(0xef000000 | swival, &usp[1]); - /* ldr pc, [sp], #12 */ - put_user(0xe49df00c, &usp[2]); - - flush_icache_range((unsigned long)usp, - (unsigned long)(usp + 3)); - - regs->ARM_pc = regs->ARM_sp + 4; + if (put_user(regs->ARM_pc, usp) == 0) { + regs->ARM_pc = KERN_RESTART_CODE; + } else { + regs->ARM_sp += 4; + force_sigsegv(0, current); + } #endif } } diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 27beece15502..6fcfe8398aa4 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -1,12 +1,14 @@ /* * linux/arch/arm/kernel/signal.h * - * Copyright (C) 2005 Russell King. + * Copyright (C) 2005-2009 Russell King. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) +#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) extern const unsigned long sigreturn_codes[7]; +extern const unsigned long syscall_restart_code[2]; diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index d3831f616ee9..9ab4149bd983 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -37,6 +37,10 @@ void __init scu_enable(void __iomem *scu_base) u32 scu_ctrl; scu_ctrl = __raw_readl(scu_base + SCU_CTRL); + /* already enabled? */ + if (scu_ctrl & 1) + return; + scu_ctrl |= 1; __raw_writel(scu_ctrl, scu_base + SCU_CTRL); diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f838f36eb702..3f361a783f43 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/kernel/traps.c * - * Copyright (C) 1995-2002 Russell King + * Copyright (C) 1995-2009 Russell King * Fragments that appear the same as linux/arch/i386/kernel/traps.c (C) Linus Torvalds * * This program is free software; you can redistribute it and/or modify @@ -528,7 +528,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) * __kuser_cmpxchg code in entry-armv.S should be aware of its * existence. Don't ever use this from user code. */ - case 0xfff0: + case NR(cmpxchg): for (;;) { extern void do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs); @@ -573,7 +573,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if not implemented, rather than raising SIGILL. This way the calling program can gracefully determine whether a feature is supported. */ - if (no <= 0x7ff) + if ((no & 0xffff) <= 0x7ff) return -ENOSYS; break; } @@ -751,6 +751,8 @@ void __init early_trap_init(void) */ memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes, sizeof(sigreturn_codes)); + memcpy((void *)KERN_RESTART_CODE, syscall_restart_code, + sizeof(syscall_restart_code)); flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 39baf1128bfa..786ac2b6914a 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -26,6 +26,15 @@ * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html */ +#if !defined (__ARM_EABI__) +#warning Your compiler does not have EABI support. +#warning ARM unwind is known to compile only with EABI compilers. +#warning Change compiler or disable ARM_UNWIND option. +#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2) +#warning Your compiler is too buggy; it is known to not compile ARM unwind support. +#warning Change compiler or disable ARM_UNWIND option. +#endif + #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index e35d54d43e70..2fd88437348b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -289,13 +289,6 @@ config MACH_NEOCORE926 help Select this if you are using the Adeneo Neocore 926 board. -config MACH_AT91SAM9G20EK_2MMC - bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots" - depends on ARCH_AT91SAM9G20 - help - Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit - Rev A or B modified for 2 MMC Slots. - endif # ---------------------------------------------------------- @@ -322,7 +315,16 @@ config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" depends on ARCH_AT91SAM9G20 help - Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit. + Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit + that embeds only one SD/MMC slot. + +config MACH_AT91SAM9G20EK_2MMC + bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit + with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and + onwards. config MACH_CPU9G20 bool "Eukrea CPU9G20 board" @@ -392,7 +394,7 @@ config MTD_AT91_DATAFLASH_CARD config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) + depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index d581cff80c4c..332b784050b2 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -838,7 +838,7 @@ static void __init at91_add_device_rtt(void) * Watchdog * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) static struct platform_device at91sam9g45_wdt_device = { .name = "at91_wdt", .id = -1, diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c index a28e53faf71d..a4102d72cc9b 100644 --- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c +++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c @@ -90,7 +90,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_ATMELMCI) +#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91)) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -113,7 +113,7 @@ static struct spi_board_info ek_spi_devices[] = { * MACB Ethernet device */ static struct at91_eth_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PC12, + .phy_irq_pin = AT91_PIN_PB0, .is_rmii = 1, }; @@ -194,24 +194,27 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) - * det_pin and wp_pin are not connected + * wp_pin is not connected */ #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) static struct mci_platform_data __initdata ek_mmc_data = { .slot[0] = { .bus_width = 4, - .detect_pin = -ENODEV, + .detect_pin = AT91_PIN_PC2, .wp_pin = -ENODEV, }, .slot[1] = { .bus_width = 4, - .detect_pin = -ENODEV, + .detect_pin = AT91_PIN_PC9, .wp_pin = -ENODEV, }, }; #else -static struct amci_platform_data __initdata ek_mmc_data = { +static struct at91_mmc_data __initdata ek_mmc_data = { + .slot_b = 1, /* Only one slot so use slot B */ + .wire4 = 1, + .det_pin = AT91_PIN_PC9, }; #endif @@ -221,13 +224,13 @@ static struct amci_platform_data __initdata ek_mmc_data = { static struct gpio_led ek_leds[] = { { /* "bottom" led, green, userled1 to be defined */ .name = "ds5", - .gpio = AT91_PIN_PB12, + .gpio = AT91_PIN_PB8, .active_low = 1, .default_trigger = "none", }, { /* "power" led, yellow */ .name = "ds1", - .gpio = AT91_PIN_PB13, + .gpio = AT91_PIN_PB9, .default_trigger = "heartbeat", } }; @@ -254,7 +257,11 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) at91_add_device_mci(0, &ek_mmc_data); +#else + at91_add_device_mmc(0, &ek_mmc_data); +#endif /* I2C */ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 34a9502c48bc..c22df30ed5e5 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -25,6 +25,8 @@ #define ARCH_ID_AT91SAM9G20 0x019905a0 #define ARCH_ID_AT91SAM9RL64 0x019b03a0 #define ARCH_ID_AT91SAM9G45 0x819b05a0 +#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ +#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ #define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 @@ -41,6 +43,11 @@ static inline unsigned long at91_cpu_identify(void) return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); } +static inline unsigned long at91_cpu_fully_identify(void) +{ + return at91_sys_read(AT91_DBGU_CIDR); +} + #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 #define ARCH_EXID_AT91SAM9G45 0x00000004 @@ -118,8 +125,10 @@ static inline unsigned long at91cap9_rev_identify(void) #ifdef CONFIG_ARCH_AT91SAM9G45 #define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45) +#define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES) #else #define cpu_is_at91sam9g45() (0) +#define cpu_is_at91sam9g45es() (0) #endif #ifdef CONFIG_ARCH_AT91CAP9 diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f95dc160c34b..b4357c388d2e 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -206,7 +206,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) for (i = 0; i < 8; i++) { if (status & (1 << i)) { int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; - desc = irq_desc + gpio_irq; generic_handle_irq(gpio_irq); } } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index ca71cf1a72a0..a4a7be308000 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -112,7 +112,7 @@ static void __init edb93xx_register_i2c(void) ARRAY_SIZE(edb93xxa_i2c_board_info)); } else if (machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data + ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index a3ec33fd79d4..469fd968d517 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -17,7 +17,6 @@ struct ep93xx_eth_data void ep93xx_map_io(void); void ep93xx_init_irq(void); -void ep93xx_init_time(unsigned long); /* EP93xx System Controller software locked register write */ void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index d83b80478b09..f3757a1c5a10 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> +#include <linux/io.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h index 2b2e7a110724..4891828454f5 100644 --- a/arch/arm/mach-integrator/include/mach/memory.h +++ b/arch/arm/mach-integrator/include/mach/memory.h @@ -28,5 +28,6 @@ #define BUS_OFFSET UL(0x80000000) #define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET) #define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET) +#define __pfn_to_bus(x) (((x) << PAGE_SHIFT) + BUS_OFFSET) #endif diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 1da5d1c18ecb..2e69168fc699 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -105,7 +105,7 @@ void __init kirkwood_setup_cpu_mbus(void) setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE); setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, -1); + TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE); /* * Setup window for NAND controller. diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 0acb61f3c10b..242dd0775343 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -845,7 +845,7 @@ int __init kirkwood_find_tclk(void) return 166666667; } -static void kirkwood_timer_init(void) +static void __init kirkwood_timer_init(void) { kirkwood_tclk = kirkwood_find_tclk(); orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); @@ -915,6 +915,14 @@ void __init kirkwood_init(void) kirkwood_uart0_data[0].uartclk = kirkwood_tclk; kirkwood_uart1_data[0].uartclk = kirkwood_tclk; + /* + * Disable propagation of mbus errors to the CPU local bus, + * as this causes mbus errors (which can occur for example + * for PCI aborts) to throw CPU aborts, which we're not set + * up to deal with. + */ + writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + kirkwood_setup_cpu_mbus(); #ifdef CONFIG_CACHE_FEROCEON_L2 diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 9e80d9232c83..418f5017c50e 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -13,6 +13,9 @@ #include <mach/kirkwood.h> +#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100) +#define CPU_CONFIG_ERROR_PROP 0x00000004 + #define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) #define CPU_RESET 0x00000002 diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index a643a846d5fb..44e8be04f259 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -15,7 +15,7 @@ static inline void __iomem *__io(unsigned long addr) { - return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE) + return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE) + KIRKWOOD_PCIE_IO_VIRT_BASE); } diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 54c132731d2d..a15cf0ee22bd 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -43,6 +43,7 @@ #define KIRKWOOD_REGS_SIZE SZ_1M #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 +#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000 #define KIRKWOOD_PCIE_MEM_SIZE SZ_128M /* diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c index 947dfb8cd5b2..77617c722299 100644 --- a/arch/arm/mach-kirkwood/openrd_base-setup.c +++ b/arch/arm/mach-kirkwood/openrd_base-setup.c @@ -70,8 +70,20 @@ static void __init openrd_base_init(void) kirkwood_ge00_init(&openrd_base_ge00_data); kirkwood_sata_init(&openrd_base_sata_data); kirkwood_sdio_init(&openrd_base_mvsdio_data); + + kirkwood_i2c_init(); } +static int __init openrd_base_pci_init(void) +{ + if (machine_is_openrd_base()) + kirkwood_pcie_init(); + + return 0; + } +subsys_initcall(openrd_base_pci_init); + + MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */ .phys_io = KIRKWOOD_REGS_PHYS_BASE, diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index d90b9aae308d..a604b2a701aa 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -93,7 +93,7 @@ static struct pci_ops pcie_ops = { }; -static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) +static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) { struct resource *res; extern unsigned int kirkwood_clk_ctrl; @@ -115,7 +115,7 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) */ res[0].name = "PCIe I/O Space"; res[0].flags = IORESOURCE_IO; - res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE; + res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE; res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCIe IO resource failed\n"); @@ -126,7 +126,7 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) */ res[1].name = "PCIe Memory Space"; res[1].flags = IORESOURCE_MEM; - res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE; + res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE; res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCIe Memory resource failed\n"); diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h index 56d12e8de895..97e8acb1cf6c 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-switch.h +++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h @@ -25,7 +25,7 @@ #define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */ #define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */ -#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ +#define KS8695_SEPXCZ(x,z) (0x0c + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ #define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */ #define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index bf1189ff9a34..7e8a80f25ddc 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -160,7 +160,7 @@ #define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM) /* PWM */ -#define GPIO27 PWM3 AF2 MFP_CFG(GPIO27, AF2) +#define GPIO27_PWM3_AF2 MFP_CFG(GPIO27, AF2) #define GPIO51_PWM2_OUT MFP_CFG(GPIO51, AF2) #define GPIO117_PWM1_OUT MFP_CFG(GPIO117, AF2) #define GPIO118_PWM2_OUT MFP_CFG(GPIO118, AF2) diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 1b22e4af8791..08465eb6a2c2 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -845,6 +845,8 @@ static char * __init mv78xx0_id(void) } else if (dev == MV78100_DEV_ID) { if (rev == MV78100_REV_A0) return "MV78100-A0"; + else if (rev == MV78100_REV_A1) + return "MV78100-A1"; else return "MV78100-Rev-Unsupported"; } else if (dev == MV78200_DEV_ID) { diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index d715b92b0908..788bdace1304 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -112,6 +112,7 @@ #define MV78100_DEV_ID 0x7810 #define MV78100_REV_A0 1 +#define MV78100_REV_A1 2 #define MV78200_DEV_ID 0x7820 #define MV78200_REV_A0 1 diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 4089951acb47..ff5e33298914 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk) - _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk) - _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk) - _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk) + _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) + _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) + _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk) @@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "mstick", mstick_clk) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index ee65dda584cf..906d59b0a7aa 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -23,6 +23,10 @@ #include <linux/mtd/plat-ram.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/irq.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -35,6 +39,7 @@ #include <mach/iomux.h> #include <mach/imx-uart.h> #include <mach/mxc_nand.h> +#include <mach/spi.h> #include "devices.h" @@ -78,8 +83,6 @@ static int pcm038_pins[] = { PC6_PF_I2C2_SCL, /* SPI1 */ PD25_PF_CSPI1_RDY, - PD27_PF_CSPI1_SS1, - PD28_PF_CSPI1_SS0, PD29_PF_CSPI1_SCLK, PD30_PF_CSPI1_MISO, PD31_PF_CSPI1_MOSI, @@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = { } }; +static int pcm038_spi_cs[] = {GPIO_PORTD + 28}; + +static struct spi_imx_master pcm038_spi_0_data = { + .chipselect = pcm038_spi_cs, + .num_chipselect = ARRAY_SIZE(pcm038_spi_cs), +}; + +static struct regulator_consumer_supply sdhc1_consumers[] = { + { + .dev = &mxc_sdhc_device1.dev, + .supply = "sdhc_vcc", + }, +}; + +static struct regulator_init_data sdhc1_data = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 0, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers), + .consumer_supplies = sdhc1_consumers, +}; + +static struct regulator_consumer_supply cam_consumers[] = { + { + .dev = NULL, + .supply = "imx_cam_vcc", + }, +}; + +static struct regulator_init_data cam_data = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 0, + }, + .num_consumer_supplies = ARRAY_SIZE(cam_consumers), + .consumer_supplies = cam_consumers, +}; + +struct mc13783_regulator_init_data pcm038_regulators[] = { + { + .id = MC13783_REGU_VCAM, + .init_data = &cam_data, + }, { + .id = MC13783_REGU_VMMC1, + .init_data = &sdhc1_data, + }, +}; + +static struct mc13783_platform_data pcm038_pmic = { + .regulators = pcm038_regulators, + .num_regulators = ARRAY_SIZE(pcm038_regulators), + .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR | + MC13783_USE_TOUCHSCREEN, +}; + +static struct spi_board_info pcm038_spi_board_info[] __initdata = { + { + .modalias = "mc13783", + .irq = IRQ_GPIOB(23), + .max_speed_hz = 300000, + .bus_num = 0, + .chip_select = 0, + .platform_data = &pcm038_pmic, + .mode = SPI_CS_HIGH, + } +}; + static void __init pcm038_init(void) { mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), @@ -219,6 +302,15 @@ static void __init pcm038_init(void) /* PE18 for user-LED D40 */ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); + + /* MC13783 IRQ */ + mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); + + mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data); + spi_register_board_info(pcm038_spi_board_info, + ARRAY_SIZE(pcm038_spi_board_info)); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #ifdef CONFIG_MACH_PCM970_BASEBOARD diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index c261f59b0b4c..3cb7f457e5d0 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -39,7 +39,6 @@ static int pcm970_pins[] = { PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, - GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */ /* display */ PA5_PF_LSCLK, PA6_PF_LD0, @@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void) "PCM970"); mxc_register_device(&mxc_fb_device, &pcm038_fb_data); + mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); platform_device_register(&pcm970_sja1000); } diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index eb12de1da42d..63511de3a559 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -1,4 +1,23 @@ +/* + * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + #include <linux/platform_device.h> +#include <linux/dma-mapping.h> #include <linux/gpio.h> #include <mach/mx25.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c index 92aa4fd19d99..d23ae571c03f 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -1,3 +1,21 @@ +/* + * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + #include <linux/types.h> #include <linux/init.h> #include <linux/clk.h> @@ -23,19 +41,12 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct mxc_nand_platform_data nand_board_info = { - .width = 1, - .hw_ecc = 1, -}; - static void __init mx25pdk_init(void) { mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_usbh2, NULL); - mxc_register_device(&mxc_nand_device, &nand_board_info); } - static void __init mx25pdk_timer_init(void) { mx25_clocks_init(26000000); diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index fe5c4217322e..c595260ec1f9 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) - _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) _REGISTER_CLOCK(NULL, "admux", admux_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 06bd6180bfc3..b2a3bcf8266e 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "rtc", rtc_clk) _REGISTER_CLOCK(NULL, "epit", epit1_clk) _REGISTER_CLOCK(NULL, "epit", epit2_clk) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 8a577f367250..e6abe181b967 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = { * SPI master controller * 3 channels */ -static struct resource imx_spi_0_resources[] = { +static struct resource mxc_spi_0_resources[] = { { .start = CSPI1_BASE_ADDR, .end = CSPI1_BASE_ADDR + SZ_4K - 1, @@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = { }, }; -static struct resource imx_spi_1_resources[] = { +static struct resource mxc_spi_1_resources[] = { { .start = CSPI2_BASE_ADDR, .end = CSPI2_BASE_ADDR + SZ_4K - 1, @@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = { }, }; -static struct resource imx_spi_2_resources[] = { +static struct resource mxc_spi_2_resources[] = { { .start = CSPI3_BASE_ADDR, .end = CSPI3_BASE_ADDR + SZ_4K - 1, @@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = { }, }; -struct platform_device imx_spi_device0 = { +struct platform_device mxc_spi_device0 = { .name = "spi_imx", .id = 0, - .num_resources = ARRAY_SIZE(imx_spi_0_resources), - .resource = imx_spi_0_resources, + .num_resources = ARRAY_SIZE(mxc_spi_0_resources), + .resource = mxc_spi_0_resources, }; -struct platform_device imx_spi_device1 = { +struct platform_device mxc_spi_device1 = { .name = "spi_imx", .id = 1, - .num_resources = ARRAY_SIZE(imx_spi_1_resources), - .resource = imx_spi_1_resources, + .num_resources = ARRAY_SIZE(mxc_spi_1_resources), + .resource = mxc_spi_1_resources, }; -struct platform_device imx_spi_device2 = { +struct platform_device mxc_spi_device2 = { .name = "spi_imx", .id = 2, - .num_resources = ARRAY_SIZE(imx_spi_2_resources), - .resource = imx_spi_2_resources, + .num_resources = ARRAY_SIZE(mxc_spi_2_resources), + .resource = mxc_spi_2_resources, }; #ifdef CONFIG_ARCH_MX35 diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 79f2be45d139..ab87419dc9a0 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; -extern struct platform_device imx_spi_device0; -extern struct platform_device imx_spi_device1; -extern struct platform_device imx_spi_device2; +extern struct platform_device mxc_spi_device0; +extern struct platform_device mxc_spi_device1; +extern struct platform_device mxc_spi_device2; diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index ad5a1122d765..bedf5b8d976a 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -81,6 +81,7 @@ void __init mx31_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +#ifdef CONFIG_ARCH_MX35 void __init mx35_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX35); @@ -89,6 +90,7 @@ void __init mx35_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +#endif void __init mx31_init_irq(void) { diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 42920f9c1a11..8ad5cc3e83e3 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = { static void __init ams_delta_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); omap_board_config = ams_delta_config; @@ -231,6 +235,8 @@ static void __init ams_delta_init(void) omap_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); + + omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } static struct plat_serial8250_port ams_delta_modem_ports[] = { diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index fb47239da72f..6c8a41f20e51 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -64,6 +64,14 @@ static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_usb_init(&generic1510_usb_config); } #endif diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cc2abbb2d0f4..cd6c39514826 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -376,6 +376,26 @@ static void __init innovator_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { + unsigned char reg; + + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM1_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM2_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); spi_register_board_info(innovator1510_boardinfo, ARRAY_SIZE(innovator1510_boardinfo)); diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 90dd0431b0dc..4de258420f39 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void) static void __init omap_palmte_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 8256139891ff..d972cf941b76 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) { static void __init omap_palmtt_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_mpu_wdt_mode(0); omap_board_config = palmtt_config; diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 81b6bde1c5a3..986bd4df0e97 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -307,6 +307,14 @@ palmz71_gpio_setup(int early) static void __init omap_palmz71_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + palmz71_gpio_setup(1); omap_mpu_wdt_mode(0); diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 02c85ca2e1df..056ae64e0f55 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = { static void __init omap_sx1_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); omap_board_config = sx1_config; diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c06e7a553472..07b07522d5bf 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void) static void __init voiceblue_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + /* Watchdog */ gpio_request(0, "Watchdog"); /* smc91x reset */ diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d496e50fec40..d23979bc0fd5 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -131,8 +131,6 @@ void __init omap_serial_init(void) } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - unsigned char reg; - switch (i) { case 0: uart1_ck = clk_get(NULL, "uart1_ck"); @@ -143,16 +141,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart1_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 1: uart2_ck = clk_get(NULL, "uart2_ck"); @@ -165,16 +153,6 @@ void __init omap_serial_init(void) else clk_set_rate(uart2_ck, 48000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 2: uart3_ck = clk_get(NULL, "uart3_ck"); @@ -185,10 +163,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart3_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - } break; } omap_serial_reset(&serial_platform_data[i]); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 75b1c7efae7e..aad194f61a33 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_NOKIA_N800 + bool + +config MACH_NOKIA_N810 + bool + +config MACH_NOKIA_N810_WIMAX + bool + config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on ARCH_OMAP2420 + select MACH_NOKIA_N800 + select MACH_NOKIA_N810 + select MACH_NOKIA_N810_WIMAX config MACH_NOKIA_RX51 bool "Nokia RX-51 board" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index efaf053eba85..0acb5560229c 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> @@ -38,7 +39,6 @@ #include <mach/gpmc.h> #include <mach/control.h> -#include <mach/keypad.h> #include <mach/gpmc-smc91x.h> #include "sdram-qimonda-hyb18m512160af-6.h" diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index eb37c40ea83a..609a5a4a7e29 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -58,6 +58,8 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); @@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void) static void __init omap_4430sdp_init(void) { platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); - omap_board_config = sdp4430_config; - omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d110a7fdfbd8..d57ec2f4d0a9 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> #include <linux/workqueue.h> #include <linux/err.h> @@ -41,7 +42,6 @@ #include <asm/delay.h> #include <mach/control.h> #include <mach/usb.h> -#include <mach/keypad.h> #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 70df6b4dbcd4..08b0816afa61 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -162,7 +162,7 @@ static int beagle_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index e4ec0c591216..4c4d7f8dbd72 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -20,6 +20,7 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/leds.h> #include <linux/spi/spi.h> @@ -37,7 +38,6 @@ #include <mach/usb.h> #include <mach/common.h> #include <mach/mcspi.h> -#include <mach/keypad.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7f6bf8772af7..7519edb69155 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -27,6 +27,7 @@ #include <linux/i2c/twl4030.h> #include <linux/leds.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio_keys.h> #include <asm/mach-types.h> @@ -39,7 +40,6 @@ #include <mach/hardware.h> #include <mach/mcspi.h> #include <mach/usb.h> -#include <mach/keypad.h> #include <mach/mux.h> #include "sdram-micron-mt46h32m32lf-6.h" @@ -134,50 +134,50 @@ static void __init pandora_keys_gpio_init(void) } static int board_keymap[] = { - /* col, row, code */ + /* row, col, code */ KEY(0, 0, KEY_9), - KEY(0, 1, KEY_0), - KEY(0, 2, KEY_BACKSPACE), - KEY(0, 3, KEY_O), - KEY(0, 4, KEY_P), - KEY(0, 5, KEY_K), - KEY(0, 6, KEY_L), - KEY(0, 7, KEY_ENTER), - KEY(1, 0, KEY_8), + KEY(0, 1, KEY_8), + KEY(0, 2, KEY_I), + KEY(0, 3, KEY_J), + KEY(0, 4, KEY_N), + KEY(0, 5, KEY_M), + KEY(1, 0, KEY_0), KEY(1, 1, KEY_7), - KEY(1, 2, KEY_6), - KEY(1, 3, KEY_5), - KEY(1, 4, KEY_4), - KEY(1, 5, KEY_3), - KEY(1, 6, KEY_2), - KEY(1, 7, KEY_1), - KEY(2, 0, KEY_I), - KEY(2, 1, KEY_U), + KEY(1, 2, KEY_U), + KEY(1, 3, KEY_H), + KEY(1, 4, KEY_B), + KEY(1, 5, KEY_SPACE), + KEY(2, 0, KEY_BACKSPACE), + KEY(2, 1, KEY_6), KEY(2, 2, KEY_Y), - KEY(2, 3, KEY_T), - KEY(2, 4, KEY_R), - KEY(2, 5, KEY_E), - KEY(2, 6, KEY_W), - KEY(2, 7, KEY_Q), - KEY(3, 0, KEY_J), - KEY(3, 1, KEY_H), - KEY(3, 2, KEY_G), + KEY(2, 3, KEY_G), + KEY(2, 4, KEY_V), + KEY(2, 5, KEY_FN), + KEY(3, 0, KEY_O), + KEY(3, 1, KEY_5), + KEY(3, 2, KEY_T), KEY(3, 3, KEY_F), - KEY(3, 4, KEY_D), - KEY(3, 5, KEY_S), - KEY(3, 6, KEY_A), - KEY(3, 7, KEY_LEFTSHIFT), - KEY(4, 0, KEY_N), - KEY(4, 1, KEY_B), - KEY(4, 2, KEY_V), - KEY(4, 3, KEY_C), + KEY(3, 4, KEY_C), + KEY(4, 0, KEY_P), + KEY(4, 1, KEY_4), + KEY(4, 2, KEY_R), + KEY(4, 3, KEY_D), KEY(4, 4, KEY_X), - KEY(4, 5, KEY_Z), - KEY(4, 6, KEY_DOT), - KEY(4, 7, KEY_COMMA), - KEY(5, 0, KEY_M), - KEY(5, 1, KEY_SPACE), - KEY(5, 2, KEY_FN), + KEY(5, 0, KEY_K), + KEY(5, 1, KEY_3), + KEY(5, 2, KEY_E), + KEY(5, 3, KEY_S), + KEY(5, 4, KEY_Z), + KEY(6, 0, KEY_L), + KEY(6, 1, KEY_2), + KEY(6, 2, KEY_W), + KEY(6, 3, KEY_A), + KEY(6, 4, KEY_DOT), + KEY(7, 0, KEY_ENTER), + KEY(7, 1, KEY_1), + KEY(7, 2, KEY_Q), + KEY(7, 3, KEY_LEFTSHIFT), + KEY(7, 4, KEY_COMMA), }; static struct matrix_keymap_data board_map_data = { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 2b0eb1ba5d7f..e34d96a825e3 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/i2c.h> #include <linux/i2c/twl4030.h> @@ -27,7 +28,6 @@ #include <mach/common.h> #include <mach/dma.h> #include <mach/gpmc.h> -#include <mach/keypad.h> #include <mach/onenand.h> #include <mach/gpmc-smc91x.h> diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f9196c3b1a7b..78869a9a1cc2 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -26,7 +26,6 @@ #include <mach/mux.h> #include <mach/board.h> #include <mach/common.h> -#include <mach/keypad.h> #include <mach/dma.h> #include <mach/gpmc.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index fd3369d5e5cb..51e0b3ba5f3a 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/input.h> +#include <linux/input/matrix_keypad.h> #include <linux/gpio.h> #include <linux/i2c/twl4030.h> #include <linux/regulator/machine.h> @@ -22,7 +23,6 @@ #include <mach/common.h> #include <mach/usb.h> -#include <mach/keypad.h> #include "mmc-twl4030.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -30,57 +30,56 @@ /* Zoom2 has Qwerty keyboard*/ static int board_keymap[] = { KEY(0, 0, KEY_E), - KEY(1, 0, KEY_R), - KEY(2, 0, KEY_T), - KEY(3, 0, KEY_HOME), - KEY(6, 0, KEY_I), - KEY(7, 0, KEY_LEFTSHIFT), - KEY(0, 1, KEY_D), + KEY(0, 1, KEY_R), + KEY(0, 2, KEY_T), + KEY(0, 3, KEY_HOME), + KEY(0, 6, KEY_I), + KEY(0, 7, KEY_LEFTSHIFT), + KEY(1, 0, KEY_D), KEY(1, 1, KEY_F), - KEY(2, 1, KEY_G), - KEY(3, 1, KEY_SEND), - KEY(6, 1, KEY_K), - KEY(7, 1, KEY_ENTER), - KEY(0, 2, KEY_X), - KEY(1, 2, KEY_C), + KEY(1, 2, KEY_G), + KEY(1, 3, KEY_SEND), + KEY(1, 6, KEY_K), + KEY(1, 7, KEY_ENTER), + KEY(2, 0, KEY_X), + KEY(2, 1, KEY_C), KEY(2, 2, KEY_V), - KEY(3, 2, KEY_END), - KEY(6, 2, KEY_DOT), - KEY(7, 2, KEY_CAPSLOCK), - KEY(0, 3, KEY_Z), - KEY(1, 3, KEY_KPPLUS), - KEY(2, 3, KEY_B), + KEY(2, 3, KEY_END), + KEY(2, 6, KEY_DOT), + KEY(2, 7, KEY_CAPSLOCK), + KEY(3, 0, KEY_Z), + KEY(3, 1, KEY_KPPLUS), + KEY(3, 2, KEY_B), KEY(3, 3, KEY_F1), - KEY(6, 3, KEY_O), - KEY(7, 3, KEY_SPACE), - KEY(0, 4, KEY_W), - KEY(1, 4, KEY_Y), - KEY(2, 4, KEY_U), - KEY(3, 4, KEY_F2), + KEY(3, 6, KEY_O), + KEY(3, 7, KEY_SPACE), + KEY(4, 0, KEY_W), + KEY(4, 1, KEY_Y), + KEY(4, 2, KEY_U), + KEY(4, 3, KEY_F2), KEY(4, 4, KEY_VOLUMEUP), - KEY(6, 4, KEY_L), - KEY(7, 4, KEY_LEFT), - KEY(0, 5, KEY_S), - KEY(1, 5, KEY_H), - KEY(2, 5, KEY_J), - KEY(3, 5, KEY_F3), + KEY(4, 6, KEY_L), + KEY(4, 7, KEY_LEFT), + KEY(5, 0, KEY_S), + KEY(5, 1, KEY_H), + KEY(5, 2, KEY_J), + KEY(5, 3, KEY_F3), KEY(5, 5, KEY_VOLUMEDOWN), - KEY(6, 5, KEY_M), - KEY(4, 5, KEY_ENTER), - KEY(7, 5, KEY_RIGHT), - KEY(0, 6, KEY_Q), - KEY(1, 6, KEY_A), - KEY(2, 6, KEY_N), - KEY(3, 6, KEY_BACKSPACE), + KEY(5, 6, KEY_M), + KEY(5, 7, KEY_ENTER), + KEY(6, 0, KEY_Q), + KEY(6, 1, KEY_A), + KEY(6, 2, KEY_N), + KEY(6, 3, KEY_BACKSPACE), KEY(6, 6, KEY_P), - KEY(7, 6, KEY_UP), KEY(6, 7, KEY_SELECT), - KEY(7, 7, KEY_DOWN), - KEY(0, 7, KEY_PROG1), /*MACRO 1 <User defined> */ - KEY(1, 7, KEY_PROG2), /*MACRO 2 <User defined> */ - KEY(2, 7, KEY_PROG3), /*MACRO 3 <User defined> */ - KEY(3, 7, KEY_PROG4), /*MACRO 4 <User defined> */ - 0 + KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */ + KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */ + KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */ + KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */ + KEY(7, 5, KEY_RIGHT), + KEY(7, 6, KEY_UP), + KEY(7, 7, KEY_DOWN) }; static struct matrix_keymap_data board_map_data = { diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 489556eecbd1..7c5c00df3c70 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -473,7 +473,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) unsigned long fint; u16 f = 0; - fint = clk->dpll_data->clk_ref->rate / (n + 1); + fint = clk->dpll_data->clk_ref->rate / n; pr_debug("clock: fint is %lu\n", fint); diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index c8119781e00a..9565c05bebd2 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -489,9 +489,9 @@ static struct clk core_ck = { static struct clk dpll3_m2x2_ck = { .name = "dpll3_m2x2_ck", .ops = &clkops_null, - .parent = &dpll3_x2_ck, + .parent = &dpll3_m2_ck, .clkdm_name = "dpll3_clkdm", - .recalc = &followparent_recalc, + .recalc = &omap3_clkoutx2_recalc, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 15876828db23..f3c992e29651 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -366,7 +366,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) if (r < 0) goto out; - gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1); + gpmc_cs_enable_mem(cs, res->start, resource_size(res)); *base = res->start; gpmc_cs_set_reserved(cs, 1); out: @@ -378,7 +378,7 @@ EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { spin_lock(&gpmc_mem_lock); - if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) { + if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) { printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); BUG(); spin_unlock(&gpmc_mem_lock); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e3a3bad1d84f..56be87d13edb 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); +#endif omap_serial_early_init(); +#ifndef CONFIG_ARCH_OMAP4 omap_hwmod_late_init(); omap_pm_if_init(); omap2_sdrc_init(sdrc_cs0, sdrc_cs1); diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index c035ad3426d0..ef57b38a56a4 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -300,7 +300,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) dev_err(&pdev->dev, "invalid mem resource\n"); return -ENODEV; } - mbox_base = ioremap(res->start, res->end - res->start); + mbox_base = ioremap(res->start, resource_size(res)); if (!mbox_base) return -ENOMEM; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 378c2f618358..89463190923a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -639,14 +639,15 @@ static void __init prcm_setup_regs(void) prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); - /* Enable GPIO wakeups in PER */ + /* Enable wakeups in PER */ prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN); + OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3, + OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_GRPSEL_GPIO6, + OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3, OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index ae2186892c85..54dfeb5d5667 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { -#ifdef CONFIG_ARCH_OMAP4 - .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), - .mapbase = OMAP_UART4_BASE, - .irq = 70, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { -#endif .flags = 0 } }; diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index aac2cda60e09..102916f1e465 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -43,10 +43,10 @@ #define CM_X300_ETH_PHYS 0x08000010 -#define GPIO82_MMC2_IRQ (82) -#define GPIO85_MMC2_WP (85) +#define GPIO82_MMC_IRQ (82) +#define GPIO85_MMC_WP (85) -#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ) +#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ) #define GPIO95_RTC_CS (95) #define GPIO96_RTC_WR (96) @@ -292,37 +292,37 @@ static inline void cm_x300_init_nand(void) {} #endif #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) -/* The first MMC slot of CM-X300 is hardwired to Libertas card and has +static struct pxamci_platform_data cm_x300_mci_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = GPIO82_MMC_IRQ, + .gpio_card_ro = GPIO85_MMC_WP, + .gpio_power = -1, +}; + +/* The second MMC slot of CM-X300 is hardwired to Libertas card and has no detection/ro pins */ -static int cm_x300_mci_init(struct device *dev, - irq_handler_t cm_x300_detect_int, - void *data) +static int cm_x300_mci2_init(struct device *dev, + irq_handler_t cm_x300_detect_int, + void *data) { return 0; } -static void cm_x300_mci_exit(struct device *dev, void *data) +static void cm_x300_mci2_exit(struct device *dev, void *data) { } -static struct pxamci_platform_data cm_x300_mci_platform_data = { +static struct pxamci_platform_data cm_x300_mci2_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = cm_x300_mci_init, - .exit = cm_x300_mci_exit, + .init = cm_x300_mci2_init, + .exit = cm_x300_mci2_exit, .gpio_card_detect = -1, .gpio_card_ro = -1, .gpio_power = -1, }; -static struct pxamci_platform_data cm_x300_mci2_platform_data = { - .detect_delay = 20, - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_card_detect = GPIO82_MMC2_IRQ, - .gpio_card_ro = GPIO85_MMC2_WP, - .gpio_power = -1, -}; - static void __init cm_x300_init_mmc(void) { pxa_set_mci_info(&cm_x300_mci_platform_data); diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 494572825c7d..ec0e14b96682 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -27,6 +27,7 @@ #include <mach/colibri.h> #include <mach/pxafb.h> #include <mach/ohci.h> +#include <mach/audio.h> #include "generic.h" #include "devices.h" @@ -145,7 +146,8 @@ static void __init colibri_pxa320_init_lcd(void) static inline void colibri_pxa320_init_lcd(void) {} #endif -#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE) +#if defined(CONFIG_SND_AC97_CODEC) || \ + defined(CONFIG_SND_AC97_CODEC_MODULE) static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = { GPIO34_AC97_SYSCLK, GPIO35_AC97_SDATA_IN_0, diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 983cc8c20081..9e4d9816726a 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -447,6 +447,7 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) pxa27x_freq_table[i].frequency = freq; pxa27x_freq_table[i].index = i; } + pxa27x_freq_table[i].index = i; pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; /* diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 67f34a8d8e60..149cdd9aee4d 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -102,7 +102,7 @@ static int setup_freqs_table(struct cpufreq_policy *policy, table[i].index = i; table[i].frequency = freqs[i].cpufreq_mhz * 1000; } - table[num].frequency = i; + table[num].index = i; table[num].frequency = CPUFREQ_TABLE_END; pxa3xx_freqs = freqs; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index abff9e132749..83bd3c6e3884 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -604,7 +604,7 @@ static struct platform_device gpio_vbus = { static const struct ads7846_platform_data tsc2046_info = { .model = 7846, .vref_delay_usecs = 100, - .pressure_max = 512, + .pressure_max = 1024, .debounce_max = 10, .debounce_tol = 3, .debounce_rep = 1, diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S index 241880608ac6..a73bc86a3c26 100644 --- a/arch/arm/mach-pxa/include/mach/entry-macro.S +++ b/arch/arm/mach-pxa/include/mach/entry-macro.S @@ -46,5 +46,6 @@ beq 1001f bic \irqstat, \irqstat, #0x80000000 mov \irqnr, \irqstat, lsr #16 + add \irqnr, \irqnr, #(PXA_IRQ(0)) 1001: .endm diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index d694ce289668..6112af431fa4 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -25,6 +25,8 @@ #include "generic.h" +#define MAX_INTERNAL_IRQS 128 + #define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) #define _ICMR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR)) #define _ICLR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR)) @@ -122,6 +124,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) { int irq, i; + BUG_ON(irq_nr > MAX_INTERNAL_IRQS); + pxa_internal_irq_nr = irq_nr; for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) { @@ -149,7 +153,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) } #ifdef CONFIG_PM -static unsigned long saved_icmr[2]; +static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32]; +static unsigned long saved_ipr[MAX_INTERNAL_IRQS]; static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) { @@ -159,6 +164,8 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) saved_icmr[i] = _ICMR(irq); _ICMR(irq) = 0; } + for (i = 0; i < pxa_internal_irq_nr; i++) + saved_ipr[i] = IPR(i); return 0; } @@ -171,6 +178,8 @@ static int pxa_irq_resume(struct sys_device *dev) _ICMR(irq) = saved_icmr[i]; _ICLR(irq) = 0; } + for (i = 0; i < pxa_internal_irq_nr; i++) + IPR(i) = saved_ipr[i]; ICCR = 1; return 0; diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index bb2cc0dd44ec..0b92291a58f6 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -292,10 +292,10 @@ const static unsigned int palmtc_keypad_col_gpios[] = { static struct matrix_keypad_platform_data palmtc_keypad_platform_data = { .keymap_data = &palmtc_keymap_data, - .col_gpios = palmtc_keypad_row_gpios, - .num_col_gpios = 12, - .row_gpios = palmtc_keypad_col_gpios, - .num_row_gpios = 4, + .row_gpios = palmtc_keypad_row_gpios, + .num_row_gpios = ARRAY_SIZE(palmtc_keypad_row_gpios), + .col_gpios = palmtc_keypad_col_gpios, + .num_col_gpios = ARRAY_SIZE(palmtc_keypad_col_gpios), .active_low = 1, .debounce_ms = 20, diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index ee8d6038ce82..d98023f55503 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/gpio_keys.h> #include <linux/gpio.h> #include <linux/leds.h> #include <linux/mtd/physmap.h> @@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = { }; +static struct gpio_keys_button spitz_gpio_keys[] = { + { + .type = EV_PWR, + .code = KEY_SUSPEND, + .gpio = SPITZ_GPIO_ON_KEY, + .desc = "On/Off", + .wakeup = 1, + }, + /* Two buttons detecting the lid state */ + { + .type = EV_SW, + .code = 0, + .gpio = SPITZ_GPIO_SWA, + .desc = "Display Down", + }, + { + .type = EV_SW, + .code = 1, + .gpio = SPITZ_GPIO_SWB, + .desc = "Lid Closed", + }, +}; + +static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = { + .buttons = spitz_gpio_keys, + .nbuttons = ARRAY_SIZE(spitz_gpio_keys), +}; + +static struct platform_device spitz_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &spitz_gpio_keys_platform_data, + }, +}; + + /* * Spitz LEDs */ @@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = { static struct platform_device *devices[] __initdata = { &spitzscoop_device, &spitzkbd_device, + &spitz_gpio_keys_device, &spitzled_device, &sharpsl_nand_device, &sharpsl_rom_device, @@ -740,11 +779,36 @@ static void __init common_init(void) pxa_set_i2c_info(NULL); } +#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI) +static struct nand_bbt_descr sharpsl_akita_bbt = { + .options = 0, + .offs = 4, + .len = 1, + .pattern = scan_ff_pattern +}; + +static struct nand_ecclayout akita_oobinfo = { + .eccbytes = 24, + .eccpos = { + 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, + 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, + 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, + .oobfree = {{0x08, 0x09}} +}; +#endif + #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) static void __init spitz_init(void) { spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; +#ifdef CONFIG_MACH_BORZOI + if (machine_is_borzoi()) { + sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; + sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; + } +#endif + platform_scoop_config = &spitz_pcmcia_config; common_init(); @@ -769,22 +833,6 @@ static struct i2c_board_info akita_i2c_board_info[] = { }, }; -static struct nand_bbt_descr sharpsl_akita_bbt = { - .options = 0, - .offs = 4, - .len = 1, - .pattern = scan_ff_pattern -}; - -static struct nand_ecclayout akita_oobinfo = { - .eccbytes = 24, - .eccpos = { - 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, - 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, - 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, - .oobfree = {{0x08, 0x09}} -}; - static void __init akita_init(void) { spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON; diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index dfc9b0bc6eb2..c48e1f2c3349 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -70,6 +70,8 @@ config MACH_REALVIEW_PBX bool "Support RealView/PBX platform" select ARM_GIC select HAVE_PATA_PLATFORM + select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET + select ZONE_DMA if SPARSEMEM help Include support for the ARM(R) RealView PBX platform. @@ -82,6 +84,7 @@ config REALVIEW_HIGH_PHYS_OFFSET 0x70000000, 256MB of which being mirrored at 0x00000000. If the board supports 512MB of RAM, this option allows the memory to be accessed contiguously at the high physical - offset. + offset. On the PBX board, disabling this option allows 1GB of + RAM to be used with SPARSEMEM. endmenu diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index a2083b60e3fb..9f293438e020 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -59,6 +59,25 @@ /* used by entry-macro.S and platsmp.c */ void __iomem *gic_cpu_base_addr; +#ifdef CONFIG_ZONE_DMA +/* + * Adjust the zones if there are restrictions for DMA access. + */ +void __init realview_adjust_zones(int node, unsigned long *size, + unsigned long *hole) +{ + unsigned long dma_size = SZ_256M >> PAGE_SHIFT; + + if (!machine_is_realview_pbx() || node || (size[0] <= dma_size)) + return; + + size[ZONE_NORMAL] = size[0] - dma_size; + size[ZONE_DMA] = dma_size; + hole[ZONE_NORMAL] = hole[0]; + hole[ZONE_DMA] = 0; +} +#endif + /* * This is the RealView sched_clock implementation. This has * a resolution of 41.7ns, and a maximum value of about 179s. @@ -543,7 +562,7 @@ static int realview_clcd_setup(struct clcd_fb *fb) fb->panel = realview_clcd_panel(); fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); + &dma, GFP_KERNEL | GFP_DMA); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; @@ -788,3 +807,24 @@ void __init realview_timer_init(unsigned int timer_irq) realview_clocksource_init(); realview_clockevents_init(timer_irq); } + +/* + * Setup the memory banks. + */ +void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, + struct meminfo *meminfo) +{ + /* + * Most RealView platforms have 512MB contiguous RAM at 0x70000000. + * Half of this is mirrored at 0. + */ +#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET + meminfo->bank[0].start = 0x70000000; + meminfo->bank[0].size = SZ_512M; + meminfo->nr_banks = 1; +#else + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_256M; + meminfo->nr_banks = 1; +#endif +} diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 46cd6acb4d40..781bca68a9fa 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> #include <linux/io.h> +#include <asm/setup.h> #include <asm/leds.h> #define AMBA_DEVICE(name,busid,base,plat) \ @@ -44,6 +45,8 @@ static struct amba_device name##_device = { \ /* .dma = base##_DMA,*/ \ } +struct machine_desc; + extern struct platform_device realview_flash_device; extern struct platform_device realview_cf_device; extern struct platform_device realview_i2c_device; @@ -61,5 +64,8 @@ extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); +extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags, + char **from, struct meminfo *meminfo); +extern void (*realview_reset)(char); #endif diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index 98f8e7eeacc2..34b80b7d40b8 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -73,4 +73,9 @@ #define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ #define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ +/* + * Control register SYS_RESETCTL is set to 1 to force a soft reset + */ +#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL 0x0100 + #endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index f0d68e0fea01..7abf918b77e9 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -81,4 +81,16 @@ #define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ #define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ + /* + * Values for REALVIEW_SYS_RESET_CTRL + */ +#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR 0x01 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT 0x02 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET 0x03 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET 0x04 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR 0x05 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC 0x06 + +#define REALVIEW_PB11MP_SYS_CTRL_LED (1 << 0) + #endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 293c30025e7e..2417bbcf97fd 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -29,4 +29,53 @@ #define PHYS_OFFSET UL(0x00000000) #endif +#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA) +extern void realview_adjust_zones(int node, unsigned long *size, + unsigned long *hole); +#define arch_adjust_zones(node, size, hole) \ + realview_adjust_zones(node, size, hole) + +#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1) +#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M) +#endif + +#ifdef CONFIG_SPARSEMEM + +/* + * Sparsemem definitions for RealView PBX. + * + * The RealView PBX board has another block of 512MB of RAM at 0x20000000, + * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000) + * may be used for DMA. + * + * The macros below define a section size of 256MB and a non-linear virtual to + * physical mapping: + * + * 256MB @ 0x00000000 -> PAGE_OFFSET + * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000 + * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000 + */ +#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET +#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET" +#endif + +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS 28 + +/* bank page offsets */ +#define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000) +#define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000) + +#define __phys_to_virt(phys) \ + ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \ + (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \ + (phys) + PAGE_OFFSET) + +#define __virt_to_phys(virt) \ + ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 : \ + (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 : \ + (virt) - PAGE_OFFSET) + +#endif /* CONFIG_SPARSEMEM */ + #endif diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index c8f50835fed2..4f46bf71e752 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -119,19 +119,6 @@ #define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET) #define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET) -/* - * Values for REALVIEW_SYS_RESET_CTRL - */ -#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01 -#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02 -#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03 -#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04 -#define REALVIEW_SYS_CTRL_RESET_POR 0x05 -#define REALVIEW_SYS_CTRL_RESET_DoC 0x06 - -#define REALVIEW_SYS_CTRL_LED (1 << 0) - - /* ------------------------------------------------------------------------ * RealView control registers * ------------------------------------------------------------------------ @@ -153,7 +140,7 @@ * SYS_CLD, SYS_BOOTCS */ #define REALVIEW_SYS_LOCK_LOCKED (1 << 16) -#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */ +#define REALVIEW_SYS_LOCKVAL_MASK 0xA05F /* Enable write access */ /* * REALVIEW_SYS_FLASH diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index 1a15a441e027..a30f2e3ec178 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -25,6 +25,8 @@ #include <mach/hardware.h> #include <mach/platform.h> +void (*realview_reset)(char mode); + static inline void arch_idle(void) { /* @@ -36,16 +38,12 @@ static inline void arch_idle(void) static inline void arch_reset(char mode, const char *cmd) { - void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET; - unsigned int val; - /* * To reset, we hit the on-board reset register * in the system FPGA */ - val = __raw_readl(hdr_ctrl); - val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR; - __raw_writel(val, hdr_ctrl); + if (realview_reset) + realview_reset(mode); } #endif diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index a88458b4799d..009265818d55 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -146,11 +146,8 @@ static void __init poke_milo(void) * register. The BootMonitor waits for this register to become * non-zero. */ -#define REALVIEW_SYS_FLAGSS_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSC_OFFSET 0x34 __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), - __io_address(REALVIEW_SYS_BASE) + - REALVIEW_SYS_FLAGSS_OFFSET); + __io_address(REALVIEW_SYS_FLAGSSET)); mb(); } diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 1d65e64ae571..917f8ca3abff 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -415,6 +415,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .phys_io = REALVIEW_EB_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_irq = gic_init_irq, .timer = &realview_eb_timer, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 2817fe099319..7fb726d5f8b9 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -290,6 +290,28 @@ static struct sys_timer realview_pb1176_timer = { .init = realview_pb1176_timer_init, }; +static void realview_pb1176_reset(char mode) +{ + void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_RESETCTL_OFFSET; + void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_LOCK_OFFSET; + __raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl); + __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl); +} + +static void realview_pb1176_fixup(struct machine_desc *mdesc, + struct tag *tags, char **from, + struct meminfo *meminfo) +{ + /* + * RealView PB1176 only has 128MB of RAM mapped at 0. + */ + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_128M; + meminfo->nr_banks = 1; +} + static void __init realview_pb1176_init(void) { int i; @@ -313,6 +335,7 @@ static void __init realview_pb1176_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif + realview_reset = realview_pb1176_reset; } MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") @@ -320,6 +343,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .phys_io = REALVIEW_PB1176_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 94680fcf726d..9bbbfc05f225 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -299,6 +299,21 @@ static struct sys_timer realview_pb11mp_timer = { .init = realview_pb11mp_timer_init, }; +static void realview_pb11mp_reset(char mode) +{ + void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_RESETCTL_OFFSET; + unsigned int val; + + /* + * To reset, we hit the on-board reset register + * in the system FPGA + */ + val = __raw_readl(hdr_ctrl); + val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR; + __raw_writel(val, hdr_ctrl); +} + static void __init realview_pb11mp_init(void) { int i; @@ -324,6 +339,7 @@ static void __init realview_pb11mp_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif + realview_reset = realview_pb11mp_reset; } MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") @@ -331,6 +347,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .phys_io = REALVIEW_PB11MP_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 941beb2b9709..fe861e96c566 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -298,6 +298,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .phys_io = REALVIEW_PBA8_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pba8_map_io, .init_irq = gic_init_irq, .timer = &realview_pba8_timer, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 7e4bc6cdca52..ec39488e2b42 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -304,6 +304,26 @@ static struct sys_timer realview_pbx_timer = { .init = realview_pbx_timer_init, }; +static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags, + char **from, struct meminfo *meminfo) +{ +#ifdef CONFIG_SPARSEMEM + /* + * Memory configuration with SPARSEMEM enabled on RealView PBX (see + * asm/mach/memory.h for more information). + */ + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_256M; + meminfo->bank[1].start = 0x20000000; + meminfo->bank[1].size = SZ_512M; + meminfo->bank[2].start = 0x80000000; + meminfo->bank[2].size = SZ_256M; + meminfo->nr_banks = 3; +#else + realview_fixup(mdesc, tags, from, meminfo); +#endif +} + static void __init realview_pbx_init(void) { int i; @@ -345,6 +365,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .phys_io = REALVIEW_PBX_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index 7974afca297c..9664e011dae2 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -28,6 +28,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/gpio-fns.h> #include <asm/irq.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index c3a2629e0ded..92e2687009ea 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -110,6 +110,8 @@ enum s3c2410_dma_loadst { * waiting for reloads */ #define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */ +#define S3C2410_DMAF_CIRCULAR (1 << 2) /* no circular dma support */ + /* dma buffer */ struct s3c2410_dma_buf; @@ -194,4 +196,9 @@ struct s3c2410_dma_chan { typedef unsigned long dma_device_t; +static inline bool s3c_dma_has_circular(void) +{ + return false; +} + #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index d7bba919a77e..a8b69d77571b 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -103,6 +103,7 @@ config MACH_MINI2440 select LEDS_TRIGGER_BACKLIGHT select SND_S3C24XX_SOC_S3C24XX_UDA134X select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here to select support for the MINI2440. Is a 10cm x 10cm board available via various sources. It can come with a 3.5" or 7" touch LCD. diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index ec71a6965786..1c3382fefdd2 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -144,7 +144,7 @@ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { .type = (S3C2410_LCDCON1_TFT16BPP |\ S3C2410_LCDCON1_TFT) -struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { +static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { [0] = { /* mini2440 + 3.5" TFT + touchscreen */ _LCD_DECLARE( 7, /* The 3.5 is quite fast */ @@ -191,7 +191,7 @@ struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { #define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) #define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) -struct s3c2410fb_mach_info mini2440_fb_info __initdata = { +static struct s3c2410fb_mach_info mini2440_fb_info __initdata = { .displays = &mini2440_lcd_cfg[0], /* not constant! see init */ .num_displays = 1, .default_display = 0, diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h index 1067619f0ba0..6723860748be 100644 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -58,12 +58,9 @@ enum dma_ch { DMACH_MAX /* the end */ }; -static __inline__ int s3c_dma_has_circular(void) +static __inline__ bool s3c_dma_has_circular(void) { - /* we will be supporting ciruclar buffers as soon as we have DMA - * engine support. - */ - return 1; + return true; } #define S3C2410_DMAF_CIRCULAR (1 << 0) diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index 53fc3ff657f7..72d4b11b2077 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig @@ -77,6 +77,7 @@ config SMDK6410_WM1190_EV1 depends on MACH_SMDK6410 select REGULATOR select REGULATOR_WM8350 + select S3C24XX_GPIO_EXTRA64 select MFD_WM8350_I2C select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8350_CONFIG_MODE_3 diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index ea51dbe76e3e..9f1a21462620 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -320,6 +320,9 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350) { int i; + /* Configure the IRQ line */ + s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP); + /* Instantiate the regulators */ for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++) wm8350_register_regulator(wm8350, diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index be60d6deee8b..653e25be3dd8 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -408,7 +408,7 @@ static struct platform_device keypad_device = { }; static struct platform_device rtc_device = { - .name = "rtc0", + .name = "rtc-coh901331", .id = -1, .num_resources = ARRAY_SIZE(rtc_resources), .resource = rtc_resources, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 9cf7706e0be0..7b7d4c36c11c 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -122,10 +122,7 @@ config CPU_ARM920T select CPU_TLB_V4WBI if MMU help The ARM920T is licensed to be produced by numerous vendors, - and is used in the Maverick EP9312 and the Samsung S3C2410. - - More information on the Maverick EP9312 at - <http://linuxdevices.com/products/PD2382866068.html>. + and is used in the Cirrus EP93xx and the Samsung S3C2410. Say Y if you want support for the ARM920T processor. Otherwise, say N. diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 6bda76a43199..a9e22e31eaa1 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -50,10 +50,7 @@ void __new_context(struct mm_struct *mm) isb(); flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { - asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" - "mcr p15, 0, %0, c7, c5, 6 @ flush BTAC/BTB\n" - : - : "r" (0)); + __flush_icache_all(); dsb(); } } diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 4127a7bddfe5..841f355319bf 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -41,6 +41,14 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to, kfrom = kmap_atomic(from, KM_USER0); kto = kmap_atomic(to, KM_USER1); copy_page(kto, kfrom); +#ifdef CONFIG_HIGHMEM + /* + * kmap_atomic() doesn't set the page virtual address, and + * kunmap_atomic() takes care of cache flushing already. + */ + if (page_address(to) != NULL) +#endif + __cpuc_flush_dcache_page(kto); kunmap_atomic(kto, KM_USER1); kunmap_atomic(kfrom, KM_USER0); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index b30925fcbcdc..b9590a7085ca 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -205,7 +205,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, order = get_order(size); - if (mask != 0xffffffff) + if (mask < 0xffffffffULL) gfp |= GFP_DMA; page = alloc_pages(gfp, order); @@ -289,7 +289,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (!mask) goto error; - if (mask != 0xffffffff) + if (mask < 0xffffffffULL) gfp |= GFP_DMA; virt = kmalloc(size, gfp); if (!virt) diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index d0d17b6a3703..729602291958 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -23,6 +23,8 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> +#include "mm.h" + static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE; /* @@ -151,7 +153,14 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte) if (!pfn_valid(pfn)) return; + /* + * The zero page is never written to, so never has any dirty + * cache lines, and therefore never needs to be flushed. + */ page = pfn_to_page(pfn); + if (page == ZERO_PAGE(0)) + return; + mapping = page_mapping(page); #ifndef CONFIG_SMP if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index b27942909b23..329594e760cd 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -18,10 +18,6 @@ #include "mm.h" -#ifdef CONFIG_ARM_ERRATA_411920 -extern void v6_icache_inval_all(void); -#endif - #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -35,77 +31,61 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) flush_tlb_kernel_page(to); asm( "mcrr p15, 0, %1, %0, c14\n" - " mcr p15, 0, %2, c7, c10, 4\n" -#ifndef CONFIG_ARM_ERRATA_411920 - " mcr p15, 0, %2, c7, c5, 0\n" -#endif + " mcr p15, 0, %2, c7, c10, 4" : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); -#ifdef CONFIG_ARM_ERRATA_411920 - v6_icache_inval_all(); -#endif } void flush_cache_mm(struct mm_struct *mm) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) - __cpuc_flush_user_all(); + vivt_flush_cache_mm(mm); return; } if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" - " mcr p15, 0, %0, c7, c10, 4\n" -#ifndef CONFIG_ARM_ERRATA_411920 - " mcr p15, 0, %0, c7, c5, 0\n" -#endif + " mcr p15, 0, %0, c7, c10, 4" : : "r" (0) : "cc"); -#ifdef CONFIG_ARM_ERRATA_411920 - v6_icache_inval_all(); -#endif } } void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) - __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), - vma->vm_flags); + vivt_flush_cache_range(vma, start, end); return; } if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" - " mcr p15, 0, %0, c7, c10, 4\n" -#ifndef CONFIG_ARM_ERRATA_411920 - " mcr p15, 0, %0, c7, c5, 0\n" -#endif + " mcr p15, 0, %0, c7, c10, 4" : : "r" (0) : "cc"); -#ifdef CONFIG_ARM_ERRATA_411920 - v6_icache_inval_all(); -#endif } + + if (vma->vm_flags & VM_EXEC) + __flush_icache_all(); } void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { - unsigned long addr = user_addr & PAGE_MASK; - __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); - } + vivt_flush_cache_page(vma, user_addr, pfn); return; } - if (cache_is_vipt_aliasing()) + if (cache_is_vipt_aliasing()) { flush_pfn_alias(pfn, user_addr); + __flush_icache_all(); + } + + if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged()) + __flush_icache_all(); } void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, @@ -113,15 +93,13 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, unsigned long len, int write) { if (cache_is_vivt()) { - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) { - unsigned long addr = (unsigned long)kaddr; - __cpuc_coherent_kern_range(addr, addr + len); - } + vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write); return; } if (cache_is_vipt_aliasing()) { flush_pfn_alias(page_to_pfn(page), uaddr); + __flush_icache_all(); return; } @@ -139,6 +117,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, void __flush_dcache_page(struct address_space *mapping, struct page *page) { + void *addr = page_address(page); + /* * Writeback any data associated with the kernel mapping of this * page. This ensures that data in the physical page is mutually @@ -149,9 +129,9 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) * kmap_atomic() doesn't set the page virtual address, and * kunmap_atomic() takes care of cache flushing already. */ - if (page_address(page)) + if (addr) #endif - __cpuc_flush_dcache_page(page_address(page)); + __cpuc_flush_dcache_page(addr); /* * If this is a page cache page, and we have an aliasing VIPT cache, @@ -215,7 +195,16 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p */ void flush_dcache_page(struct page *page) { - struct address_space *mapping = page_mapping(page); + struct address_space *mapping; + + /* + * The zero page is never written to, so never has any dirty + * cache lines, and therefore never needs to be flushed. + */ + if (page == ZERO_PAGE(0)) + return; + + mapping = page_mapping(page); #ifndef CONFIG_SMP if (!PageHighMem(page) && mapping && !mapping_mapped(mapping)) @@ -261,6 +250,7 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l * userspace address only. */ flush_pfn_alias(pfn, vmaddr); + __flush_icache_all(); } /* diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 40940d7ce4ff..52c40d155672 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -273,7 +273,6 @@ static void __init bootmem_init_node(int node, struct meminfo *mi, struct membank *bank = &mi->bank[i]; if (!bank->highmem) free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); - memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); } /* @@ -370,6 +369,19 @@ int pfn_valid(unsigned long pfn) return 0; } EXPORT_SYMBOL(pfn_valid); + +static void arm_memory_present(struct meminfo *mi, int node) +{ +} +#else +static void arm_memory_present(struct meminfo *mi, int node) +{ + int i; + for_each_nodebank(i, mi, node) { + struct membank *bank = &mi->bank[i]; + memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); + } +} #endif static int __init meminfo_cmp(const void *_a, const void *_b) @@ -427,6 +439,12 @@ void __init bootmem_init(void) */ if (node == initrd_node) bootmem_reserve_initrd(node); + + /* + * Sparsemem tries to allocate bootmem in memory_present(), + * so must be done after the fixed reservations + */ + arm_memory_present(mi, node); } /* diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index c4f6f05198e0..a888363398f8 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -24,6 +24,8 @@ struct mem_type { const struct mem_type *get_mem_type(unsigned int type); +extern void __flush_dcache_page(struct address_space *mapping, struct page *page); + #endif struct map_desc; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 02243eeccf50..2427cdcd9098 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -117,6 +117,13 @@ static void __init early_cachepolicy(char **p) } if (i == ARRAY_SIZE(cache_policies)) printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + /* + * This restriction is partly to do with the way we boot; it is + * unpredictable to have memory mapped using two different sets of + * memory attributes (shared, type, and cache attribs). We can not + * change these attributes once the initial assembly has setup the + * page tables. + */ if (cpu_architecture() >= CPU_ARCH_ARMv6) { printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n"); cachepolicy = CPOLICY_WRITEBACK; @@ -1029,7 +1036,7 @@ void __init paging_init(struct machine_desc *mdesc) */ zero_page = alloc_bootmem_low_pages(PAGE_SIZE); empty_zero_page = virt_to_page(zero_page); - flush_dcache_page(empty_zero_page); + __flush_dcache_page(NULL, empty_zero_page); } /* diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 194737d60a22..70f75d2e3ead 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -32,8 +32,10 @@ #ifndef CONFIG_SMP #define TTB_FLAGS TTB_RGN_WBWA +#define PMD_FLAGS PMD_SECT_WB #else #define TTB_FLAGS TTB_RGN_WBWA|TTB_S +#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S #endif ENTRY(cpu_v6_proc_init) @@ -222,10 +224,9 @@ __v6_proc_info: .long 0x0007b000 .long 0x0007f000 .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ + PMD_SECT_AP_READ | \ + PMD_FLAGS .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 23ebcf6eab9f..3a285218fd15 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -33,9 +33,11 @@ #ifndef CONFIG_SMP /* PTWs cacheable, inner WB not shareable, outer WB not shareable */ #define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB +#define PMD_FLAGS PMD_SECT_WB #else /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */ #define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA +#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S #endif ENTRY(cpu_v7_proc_init) @@ -184,9 +186,10 @@ cpu_v7_name: */ __v7_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode and - orr r0, r0, #(1 << 6) | (1 << 0) @ TLB ops broadcasting - mcr p15, 0, r0, c1, c0, 1 + mrc p15, 0, r0, c1, c0, 1 + tst r0, #(1 << 6) @ SMP/nAMP mode enabled? + orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and + mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting #endif adr r12, __v7_setup_stack @ the local stack stmia r12, {r0-r5, r7, r9, r11, lr} @@ -326,10 +329,9 @@ __v7_proc_info: .long 0x000f0000 @ Required ID value .long 0x000f0000 @ Mask for ID .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ + PMD_SECT_AP_READ | \ + PMD_FLAGS .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c index fe581383d3e2..f7d2ec5ee9a1 100644 --- a/arch/arm/oprofile/op_model_v6.c +++ b/arch/arm/oprofile/op_model_v6.c @@ -33,6 +33,9 @@ static int irqs[] = { #ifdef CONFIG_ARCH_OMAP2 3, #endif +#ifdef CONFIG_ARCH_BCMRING + IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */ +#endif }; static void armv6_pmu_stop(void) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 1868c0d8f9b5..341235c278ac 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -127,7 +127,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) } /* FIXME: what's the actual transition time? */ - policy->cpuinfo.transition_latency = 10 * 1000 * 1000; + policy->cpuinfo.transition_latency = 300 * 1000; return 0; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 0eb676d7e807..68eaae324b6a 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -691,13 +691,16 @@ static inline void disable_lnk(int lch) static inline void omap2_enable_irq_lch(int lch) { u32 val; + unsigned long flags; if (!cpu_class_is_omap2()) return; + spin_lock_irqsave(&dma_chan_lock, flags); val = dma_read(IRQENABLE_L0); val |= 1 << lch; dma_write(val, IRQENABLE_L0); + spin_unlock_irqrestore(&dma_chan_lock, flags); } int omap_request_dma(int dev_id, const char *dev_name, @@ -799,10 +802,13 @@ void omap_free_dma(int lch) if (cpu_class_is_omap2()) { u32 val; + + spin_lock_irqsave(&dma_chan_lock, flags); /* Disable interrupts */ val = dma_read(IRQENABLE_L0); val &= ~(1 << lch); dma_write(val, IRQENABLE_L0); + spin_unlock_irqrestore(&dma_chan_lock, flags); /* Clear the CSR register and IRQ status register */ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch)); @@ -978,6 +984,14 @@ void omap_stop_dma(int lch) { u32 l; + /* Disable all interrupts on the channel */ + if (cpu_class_is_omap1()) + dma_write(0, CICR(lch)); + + l = dma_read(CCR(lch)); + l &= ~OMAP_DMA_CCR_EN; + dma_write(l, CCR(lch)); + if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT]; @@ -995,18 +1009,8 @@ void omap_stop_dma(int lch) next_lch = dma_chan[cur_lch].next_lch; cur_lch = next_lch; } while (next_lch != -1); - - return; } - /* Disable all interrupts on the channel */ - if (cpu_class_is_omap1()) - dma_write(0, CICR(lch)); - - l = dma_read(CCR(lch)); - l &= ~OMAP_DMA_CCR_EN; - dma_write(l, CCR(lch)); - dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } EXPORT_SYMBOL(omap_stop_dma); @@ -1110,6 +1114,14 @@ int omap_dma_running(void) { int lch; + /* + * On OMAP1510, internal LCD controller will start the transfer + * when it gets enabled, so assume DMA running if LCD enabled. + */ + if (cpu_is_omap1510()) + if (omap_readw(0xfffec000 + 0x00) & (1 << 0)) + return 1; + /* Check if LCD DMA is running */ if (cpu_is_omap16xx()) if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 71ebd7fcfea1..7c345b757df1 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -373,7 +373,7 @@ static inline int gpio_valid(int gpio) static int check_gpio(int gpio) { - if (unlikely(gpio_valid(gpio)) < 0) { + if (unlikely(gpio_valid(gpio) < 0)) { printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); dump_stack(); return -1; diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h index d91b9be334ff..3ae52ccc793c 100644 --- a/arch/arm/plat-omap/include/mach/keypad.h +++ b/arch/arm/plat-omap/include/mach/keypad.h @@ -10,7 +10,7 @@ #ifndef ASMARM_ARCH_KEYPAD_H #define ASMARM_ARCH_KEYPAD_H -#include <linux/input/matrix_keypad.h> +#warning: Please update the board to use matrix_keypad.h instead struct omap_kp_platform_data { int rows; @@ -37,6 +37,9 @@ struct omap_kp_platform_data { #define KEY_PERSISTENT 0x00800000 #define KEYNUM_MASK 0x00EFFFFF +#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val)) +#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \ + KEY_PERSISTENT) #endif diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4b6012707307..94584f167a82 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da) nent = 1; /* for the next L1 entry */ } else { bytes = IOPGD_SIZE; - if (*iopgd & IOPGD_SUPER) { + if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) { nent *= 16; /* rewind to the 1st entry */ iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK); diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 22086e696e8e..857a6839071c 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -16,7 +16,7 @@ #ifndef __ASM_PLAT_MFP_H #define __ASM_PLAT_MFP_H -#define mfp_to_gpio(m) ((m) % 128) +#define mfp_to_gpio(m) ((m) % 256) /* list of all the configurable MFP pins */ enum { diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index 9405d0379c85..be58f9fe65b0 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -207,7 +207,7 @@ unsigned long mfp_read(int mfp) { unsigned long val, flags; - BUG_ON(mfp >= MFP_PIN_MAX); + BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX); spin_lock_irqsave(&mfp_spin_lock, flags); val = mfpr_readl(mfp_table[mfp].mfpr_off); @@ -220,7 +220,7 @@ void mfp_write(int mfp, unsigned long val) { unsigned long flags; - BUG_ON(mfp >= MFP_PIN_MAX); + BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX); spin_lock_irqsave(&mfp_spin_lock, flags); mfpr_writel(mfp_table[mfp].mfpr_off, val); diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 4d36b784fb8b..df47322492d5 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -189,7 +189,7 @@ int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch) err: return ret; } -EXPORT_SYMBOL_GPL(s3c_adc_convert); +EXPORT_SYMBOL_GPL(s3c_adc_read); static void s3c_adc_default_select(struct s3c_adc_client *client, unsigned select) diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 5447e60f3936..4af9dd948793 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -61,6 +61,7 @@ static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; +static const char name_s3c2442b[] = "S3C2442B"; static const char name_s3c2443[] = "S3C2443"; static const char name_s3c2410a[] = "S3C2410A"; static const char name_s3c2440a[] = "S3C2440A"; @@ -112,6 +113,15 @@ static struct cpu_table cpu_ids[] __initdata = { .name = name_s3c2442 }, { + .idcode = 0x32440aab, + .idmask = 0xffffffff, + .map_io = s3c244x_map_io, + .init_clocks = s3c244x_init_clocks, + .init_uarts = s3c244x_init_uarts, + .init = s3c2442_init, + .name = name_s3c2442b + }, + { .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 196b19123653..f046f8c51084 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -208,14 +208,14 @@ s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan, { unsigned long reload; - pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", - buf, (unsigned long)buf->data, buf->size); - if (buf == NULL) { dmawarn("buffer is NULL\n"); return -EINVAL; } + pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", + buf, (unsigned long)buf->data, buf->size); + /* check the state of the channel before we do anything */ if (chan->load_state == S3C2410_DMALOAD_1LOADED) { diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 95df059b5a1d..5467470badfd 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -29,6 +29,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/gpio-fns.h> #include <asm/irq.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index efeb025affc7..c776120b99e6 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -222,7 +222,9 @@ extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); /* S3C2410 and compatible exported functions */ extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); +extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); +#ifdef CONFIG_S3C2410_IOTIMING extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); @@ -231,8 +233,11 @@ extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); - -extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); +#else +#define s3c2410_iotiming_calc NULL +#define s3c2410_iotiming_get NULL +#define s3c2410_iotiming_set NULL +#endif /* CONFIG_S3C2410_IOTIMING */ /* S3C2412 compatible routines */ diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h index b6deeef8f663..82ab4aad1bbe 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h @@ -27,6 +27,7 @@ extern void s3c2410_init_clocks(int xtal); #define s3c2410_init_uarts NULL #define s3c2410_map_io NULL #define s3c2410_init NULL +#define s3c2410a_init NULL #endif extern int s3c2410_baseclk_add(void); diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 266a10745a85..d554b936fcfb 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -151,8 +151,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, src = chan->dev_addr; dst = data; control0 = PL080_CONTROL_SRC_AHB2; - control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; - control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT; control0 |= PL080_CONTROL_DST_INCR; break; @@ -160,8 +158,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, src = data; dst = chan->dev_addr; control0 = PL080_CONTROL_DST_AHB2; - control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; - control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT; control0 |= PL080_CONTROL_SRC_INCR; break; default: @@ -173,6 +169,8 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, control1 = size >> chan->hw_width; /* size in no of xfers */ control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */ control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */ + control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; + control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; lli->src_addr = src; lli->dst_addr = dst; @@ -339,6 +337,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, struct s3c64xx_dma_buff *next; struct s3c64xx_dma_buff *buff; struct pl080s_lli *lli; + unsigned long flags; int ret; WARN_ON(!chan); @@ -366,6 +365,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, s3c64xx_dma_fill_lli(chan, lli, data, size); + local_irq_save(flags); + if ((next = chan->next) != NULL) { struct s3c64xx_dma_buff *end = chan->end; struct pl080s_lli *endlli = end->lli; @@ -397,6 +398,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, s3c64xx_lli_to_regs(chan, lli); } + local_irq_restore(flags); + show_lli(lli); dbg_showchan(chan); @@ -560,26 +563,11 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) EXPORT_SYMBOL(s3c2410_dma_free); - -static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs) -{ - struct s3c2410_dma_chan *chan = dmac->channels + offs; - - /* note, we currently do not bother to work out which buffer - * or buffers have been completed since the last tc-irq. */ - - if (chan->callback_fn) - (chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK); -} - -static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs) -{ - printk(KERN_DEBUG "%s: offs %d\n", __func__, offs); -} - static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) { struct s3c64xx_dmac *dmac = pw; + struct s3c2410_dma_chan *chan; + enum s3c2410_dma_buffresult res; u32 tcstat, errstat; u32 bit; int offs; @@ -588,14 +576,54 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) errstat = readl(dmac->regs + PL080_ERR_STATUS); for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { + struct s3c64xx_dma_buff *buff; + + if (!(errstat & bit) && !(tcstat & bit)) + continue; + + chan = dmac->channels + offs; + res = S3C2410_RES_ERR; + if (tcstat & bit) { writel(bit, dmac->regs + PL080_TC_CLEAR); - s3c64xx_dma_tcirq(dmac, offs); + res = S3C2410_RES_OK; } - if (errstat & bit) { - s3c64xx_dma_errirq(dmac, offs); + if (errstat & bit) writel(bit, dmac->regs + PL080_ERR_CLEAR); + + /* 'next' points to the buffer that is next to the + * currently active buffer. + * For CIRCULAR queues, 'next' will be same as 'curr' + * when 'end' is the active buffer. + */ + buff = chan->curr; + while (buff && buff != chan->next + && buff->next != chan->next) + buff = buff->next; + + if (!buff) + BUG(); + + if (buff == chan->next) + buff = chan->end; + + s3c64xx_dma_bufffdone(chan, buff, res); + + /* Free the node and update curr, if non-circular queue */ + if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) { + chan->curr = buff->next; + s3c64xx_dma_freebuff(buff); + } + + /* Update 'next' */ + buff = chan->next; + if (chan->next == chan->end) { + chan->next = chan->curr; + if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) + chan->end = NULL; + } else { + chan->next = buff->next; } } diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h index a8777a755dfa..ff46e7fa957a 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h @@ -51,8 +51,8 @@ #define S3C6400_CLKDIV0_HCLK_SHIFT (8) #define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) #define S3C6400_CLKDIV0_MPLL_SHIFT (4) -#define S3C6400_CLKDIV0_ARM_MASK (0x3 << 0) -#define S3C6410_CLKDIV0_ARM_MASK (0x7 << 0) +#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) +#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) #define S3C6400_CLKDIV0_ARM_SHIFT (0) /* CLKDIV1 */ diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 9745852261e0..6ffa21eb1b91 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -677,6 +677,9 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + /* For now assume the mux always selects the crystal */ + clk_ext_xtal_mux.parent = xtal_clk; + epll = s3c6400_get_epll(xtal); mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 94be7bb6cb9a..07b976da6174 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri Sep 18 21:42:00 2009 +# Last update: Wed Nov 25 22:14:58 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -928,7 +928,7 @@ palmt5 MACH_PALMT5 PALMT5 917 palmtc MACH_PALMTC PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 mxc30030evb MACH_MXC30030EVB MXC30030EVB 920 -rea_2d MACH_REA_2D REA_2D 921 +rea_cpu2 MACH_REA_2D REA_2D 921 eti3e524 MACH_TI3E524 TI3E524 922 ateb9200 MACH_ATEB9200 ATEB9200 923 auckland MACH_AUCKLAND AUCKLAND 924 @@ -2421,3 +2421,118 @@ liberty MACH_LIBERTY LIBERTY 2434 mh355 MACH_MH355 MH355 2435 pc7802 MACH_PC7802 PC7802 2436 gnet_sgc MACH_GNET_SGC GNET_SGC 2437 +einstein15 MACH_EINSTEIN15 EINSTEIN15 2438 +cmpd MACH_CMPD CMPD 2439 +davinci_hase1 MACH_DAVINCI_HASE1 DAVINCI_HASE1 2440 +lgeincitephone MACH_LGEINCITEPHONE LGEINCITEPHONE 2441 +ea313x MACH_EA313X EA313X 2442 +fwbd_39064 MACH_FWBD_39064 FWBD_39064 2443 +fwbd_390128 MACH_FWBD_390128 FWBD_390128 2444 +pelco_moe MACH_PELCO_MOE PELCO_MOE 2445 +minimix27 MACH_MINIMIX27 MINIMIX27 2446 +omap3_thunder MACH_OMAP3_THUNDER OMAP3_THUNDER 2447 +passionc MACH_PASSIONC PASSIONC 2448 +mx27amata MACH_MX27AMATA MX27AMATA 2449 +bgat1 MACH_BGAT1 BGAT1 2450 +buzz MACH_BUZZ BUZZ 2451 +mb9g20 MACH_MB9G20 MB9G20 2452 +yushan MACH_YUSHAN YUSHAN 2453 +lizard MACH_LIZARD LIZARD 2454 +omap3polycom MACH_OMAP3POLYCOM OMAP3POLYCOM 2455 +smdkv210 MACH_SMDKV210 SMDKV210 2456 +bravo MACH_BRAVO BRAVO 2457 +siogentoo1 MACH_SIOGENTOO1 SIOGENTOO1 2458 +siogentoo2 MACH_SIOGENTOO2 SIOGENTOO2 2459 +sm3k MACH_SM3K SM3K 2460 +acer_tempo_f900 MACH_ACER_TEMPO_F900 ACER_TEMPO_F900 2461 +sst61vc010_dev MACH_SST61VC010_DEV SST61VC010_DEV 2462 +glittertind MACH_GLITTERTIND GLITTERTIND 2463 +omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464 +omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465 +cybook2440 MACH_CYBOOK2440 CYBOOK2440 2466 +torino_s MACH_TORINO_S TORINO_S 2467 +havana MACH_HAVANA HAVANA 2468 +beaumont_11 MACH_BEAUMONT_11 BEAUMONT_11 2469 +vanguard MACH_VANGUARD VANGUARD 2470 +s5pc110_draco MACH_S5PC110_DRACO S5PC110_DRACO 2471 +cartesio_two MACH_CARTESIO_TWO CARTESIO_TWO 2472 +aster MACH_ASTER ASTER 2473 +voguesv210 MACH_VOGUESV210 VOGUESV210 2474 +acm500x MACH_ACM500X ACM500X 2475 +km9260 MACH_KM9260 KM9260 2476 +nideflexg1 MACH_NIDEFLEXG1 NIDEFLEXG1 2477 +ctera_plug_io MACH_CTERA_PLUG_IO CTERA_PLUG_IO 2478 +smartq7 MACH_SMARTQ7 SMARTQ7 2479 +at91sam9g10ek2 MACH_AT91SAM9G10EK2 AT91SAM9G10EK2 2480 +asusp527 MACH_ASUSP527 ASUSP527 2481 +at91sam9g20mpm2 MACH_AT91SAM9G20MPM2 AT91SAM9G20MPM2 2482 +topasa900 MACH_TOPASA900 TOPASA900 2483 +electrum_100 MACH_ELECTRUM_100 ELECTRUM_100 2484 +mx51grb MACH_MX51GRB MX51GRB 2485 +xea300 MACH_XEA300 XEA300 2486 +htcstartrek MACH_HTCSTARTREK HTCSTARTREK 2487 +lima MACH_LIMA LIMA 2488 +csb740 MACH_CSB740 CSB740 2489 +usb_s8815 MACH_USB_S8815 USB_S8815 2490 +watson_efm_plugin MACH_WATSON_EFM_PLUGIN WATSON_EFM_PLUGIN 2491 +milkyway MACH_MILKYWAY MILKYWAY 2492 +g4evm MACH_G4EVM G4EVM 2493 +picomod6 MACH_PICOMOD6 PICOMOD6 2494 +omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495 +ip6000 MACH_IP6000 IP6000 2496 +ip6010 MACH_IP6010 IP6010 2497 +utm400 MACH_UTM400 UTM400 2498 +omap3_zybex MACH_OMAP3_ZYBEX OMAP3_ZYBEX 2499 +wireless_space MACH_WIRELESS_SPACE WIRELESS_SPACE 2500 +sx560 MACH_SX560 SX560 2501 +ts41x MACH_TS41X TS41X 2502 +elphel10373 MACH_ELPHEL10373 ELPHEL10373 2503 +rhobot MACH_RHOBOT RHOBOT 2504 +mx51_refresh MACH_MX51_REFRESH MX51_REFRESH 2505 +ls9260 MACH_LS9260 LS9260 2506 +shank MACH_SHANK SHANK 2507 +qsd8x50_st1 MACH_QSD8X50_ST1 QSD8X50_ST1 2508 +at91sam9m10ekes MACH_AT91SAM9M10EKES AT91SAM9M10EKES 2509 +hiram MACH_HIRAM HIRAM 2510 +phy3250 MACH_PHY3250 PHY3250 2511 +ea3250 MACH_EA3250 EA3250 2512 +fdi3250 MACH_FDI3250 FDI3250 2513 +whitestone MACH_WHITESTONE WHITESTONE 2514 +at91sam9263nit MACH_AT91SAM9263NIT AT91SAM9263NIT 2515 +ccmx51 MACH_CCMX51 CCMX51 2516 +ccmx51js MACH_CCMX51JS CCMX51JS 2517 +ccwmx51 MACH_CCWMX51 CCWMX51 2518 +ccwmx51js MACH_CCWMX51JS CCWMX51JS 2519 +mini6410 MACH_MINI6410 MINI6410 2520 +tiny6410 MACH_TINY6410 TINY6410 2521 +nano6410 MACH_NANO6410 NANO6410 2522 +at572d940hfnldb MACH_AT572D940HFNLDB AT572D940HFNLDB 2523 +htcleo MACH_HTCLEO HTCLEO 2524 +avp13 MACH_AVP13 AVP13 2525 +xxsvideod MACH_XXSVIDEOD XXSVIDEOD 2526 +vpnext MACH_VPNEXT VPNEXT 2527 +swarco_itc3 MACH_SWARCO_ITC3 SWARCO_ITC3 2528 +tx51 MACH_TX51 TX51 2529 +dolby_cat1021 MACH_DOLBY_CAT1021 DOLBY_CAT1021 2530 +mx28evk MACH_MX28EVK MX28EVK 2531 +phoenix260 MACH_PHOENIX260 PHOENIX260 2532 +uvaca_stork MACH_UVACA_STORK UVACA_STORK 2533 +smartq5 MACH_SMARTQ5 SMARTQ5 2534 +all3078 MACH_ALL3078 ALL3078 2535 +ctera_2bay_ds MACH_CTERA_2BAY_DS CTERA_2BAY_DS 2536 +siogentoo3 MACH_SIOGENTOO3 SIOGENTOO3 2537 +epb5000 MACH_EPB5000 EPB5000 2538 +hy9263 MACH_HY9263 HY9263 2539 +acer_tempo_m900 MACH_ACER_TEMPO_M900 ACER_TEMPO_M900 2540 +acer_tempo_dx650 MACH_ACER_TEMPO_DX900 ACER_TEMPO_DX900 2541 +acer_tempo_x960 MACH_ACER_TEMPO_X960 ACER_TEMPO_X960 2542 +acer_eten_v900 MACH_ACER_ETEN_V900 ACER_ETEN_V900 2543 +acer_eten_x900 MACH_ACER_ETEN_X900 ACER_ETEN_X900 2544 +bonnell MACH_BONNELL BONNELL 2545 +oht_mx27 MACH_OHT_MX27 OHT_MX27 2546 +htcquartz MACH_HTCQUARTZ HTCQUARTZ 2547 +davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 +c3ax03 MACH_C3AX03 C3AX03 2549 +mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 +esyx MACH_ESYX ESYX 2551 +bulldog MACH_BULLDOG BULLDOG 2553 |