summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/freescale
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/freescale')
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi80
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi83
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts4
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi66
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts4
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi134
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi14
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi98
-rw-r--r--arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi6
-rw-r--r--arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi7
15 files changed, 316 insertions, 206 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 82b272fb41b9..bb788eddf9f4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -70,6 +70,24 @@
reg = <0x0>;
clocks = <&clockgen 1 0>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
+ };
+ };
+
+ idle-states {
+ /*
+ * PSCI node is not added default, U-boot will add missing
+ * parts if it determines to use PSCI.
+ */
+ entry-method = "arm,psci";
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
};
};
@@ -118,6 +136,37 @@
mask = <0x02>;
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -304,37 +353,6 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
- thermal-sensors = <&tmu 0>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit: cpu-crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
i2c0: i2c@2180000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 6341281485cf..3a09297dc0ef 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -84,19 +84,19 @@
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nor@0,0 {
+ nor@0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
- nand@1,0 {
+ nand@100000000 {
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
};
- fpga: board-control@2,0 {
+ fpga: board-control@200000000 {
compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 3dc0c8e9663d..0a82bf941e11 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -97,7 +97,7 @@
0x1 0x0 0x0 0x7e800000 0x00010000
0x2 0x0 0x0 0x7fb00000 0x00000100>;
- nor@0,0 {
+ nor@0 {
compatible = "cfi-flash";
#address-cells = <1>;
#size-cells = <1>;
@@ -106,14 +106,14 @@
device-width = <1>;
};
- nand@1,0 {
+ nand@100000000 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x1 0x0 0x10000>;
};
- cpld: board-control@2,0 {
+ cpld: board-control@200000000 {
compatible = "fsl,ls1043ardb-cpld";
reg = <0x2 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 380e7c713395..1109f22bda5e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -81,6 +81,7 @@
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu1: cpu@1 {
@@ -89,6 +90,7 @@
reg = <0x1>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu2: cpu@2 {
@@ -97,6 +99,7 @@
reg = <0x2>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu3: cpu@3 {
@@ -105,6 +108,7 @@
reg = <0x3>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
l2: l2-cache {
@@ -112,6 +116,23 @@
};
};
+ idle-states {
+ /*
+ * PSCI node is not added default, U-boot will add missing
+ * parts if it determines to use PSCI.
+ */
+ entry-method = "arm,psci";
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
+ };
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0 0x80000000>;
@@ -159,6 +180,37 @@
mask = <0x02>;
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xf08>, /* Physical Secure PPI */
@@ -342,37 +394,6 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
-
- thermal-sensors = <&tmu 3>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit: cpu-crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
qman: qman@1880000 {
compatible = "fsl,qman";
reg = <0x0 0x1880000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index 434383bade0e..410dc61fe10a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -175,19 +175,19 @@
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nor@0,0 {
+ nor@0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
- nand@1,0 {
+ nand@100000000 {
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
};
- fpga: board-control@2,0 {
+ fpga: board-control@200000000 {
compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 5dc2782e2a58..18d3c5bccfd1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -122,14 +122,14 @@
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
- nand@0,0 {
+ nand@0 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x10000>;
};
- cpld: board-control@2,0 {
+ cpld: board-control@200000000 {
compatible = "fsl,ls1046ardb-cpld";
reg = <0x2 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 06b5e12d04d8..136ebfa9b333 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -122,7 +122,7 @@
CPU_PH20: cpu-ph20 {
compatible = "arm,idle-state";
idle-state-name = "PH20";
- arm,psci-suspend-param = <0x00010000>;
+ arm,psci-suspend-param = <0x0>;
entry-latency-us = <1000>;
exit-latency-us = <1000>;
min-residency-us = <3000>;
@@ -131,6 +131,8 @@
memory@80000000 {
device_type = "memory";
+ /* Real size will be filled by bootloader */
+ reg = <0x0 0x80000000 0x0 0x0>;
};
sysclk: sysclk {
@@ -147,6 +149,37 @@
mask = <0x02>;
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) |
@@ -362,37 +395,6 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
- thermal-sensors = <&tmu 3>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit: cpu-crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
dspi: dspi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 30128051d0c0..0b96d6d4fe71 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -116,19 +116,19 @@
3 0 0x5 0x20000000 0x00010000>;
status = "okay";
- nor@0,0 {
+ nor@0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
- nand@2,0 {
+ nand@200000000 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
- fpga: board-control@3,0 {
+ fpga: board-control@300000000 {
compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
reg = <0x3 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 4f17601b919c..3d57008e70e8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -99,12 +99,12 @@
2 0 0x5 0x20000000 0x00010000>;
status = "okay";
- nand@0,0 {
+ nand@0 {
compatible = "fsl,ifc-nand";
reg = <0x0 0x0 0x10000>;
};
- fpga: board-control@2,0 {
+ fpga: board-control@200000000 {
compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 4fc150cd4ca5..1c6556bcfddf 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -130,7 +130,7 @@
CPU_PH20: cpu-ph20 {
compatible = "arm,idle-state";
idle-state-name = "PH20";
- arm,psci-suspend-param = <0x00010000>;
+ arm,psci-suspend-param = <0x0>;
entry-latency-us = <1000>;
exit-latency-us = <1000>;
min-residency-us = <3000>;
@@ -158,6 +158,44 @@
};
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu4 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
@@ -315,44 +353,6 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
- thermal-sensors = <&tmu 0>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit: cpu-crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
-
- map1 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu4 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
@@ -612,6 +612,62 @@
<0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ cluster1_core0_watchdog: wdt@c000000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc000000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core1_watchdog: wdt@c010000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc010000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core2_watchdog: wdt@c020000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc020000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core3_watchdog: wdt@c030000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc030000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core0_watchdog: wdt@c100000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc100000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core1_watchdog: wdt@c110000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc110000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core2_watchdog: wdt@c120000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc120000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster2_core3_watchdog: wdt@c130000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc130000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
};
firmware {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index aeaef01d375f..0884e1a77901 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -143,7 +143,7 @@
CPU_PW20: cpu-pw20 {
compatible = "arm,idle-state";
idle-state-name = "PW20";
- arm,psci-suspend-param = <0x00010000>;
+ arm,psci-suspend-param = <0x0>;
entry-latency-us = <2000>;
exit-latency-us = <2000>;
min-residency-us = <6000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index b2374469a830..5ac34126bfe1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -58,7 +58,7 @@
0x2 0x0 0x5 0x30000000 0x00010000
0x3 0x0 0x5 0x20000000 0x00010000>;
- nor@0,0 {
+ nor@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
@@ -67,12 +67,12 @@
device-width = <1>;
};
- nand@2,0 {
+ nand@200000000 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
- cpld@3,0 {
+ cpld@300000000 {
reg = <0x3 0x0 0x10000>;
compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
};
@@ -140,21 +140,21 @@
&dspi {
status = "okay";
- dflash0: n25q128a {
+ dflash0: n25q128a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <0>;
};
- dflash1: sst25wf040b {
+ dflash1: sst25wf040b@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <1>;
};
- dflash2: en25s64 {
+ dflash2: en25s64@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
@@ -177,7 +177,7 @@
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <20000000>;
- reg = <0>;
+ reg = <2>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f3a40af33af8..137ef4dfc3e9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -111,6 +111,55 @@
mask = <0x2>;
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 4>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu2 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map2 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu4 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ map3 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu6 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
@@ -194,55 +243,6 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
-
- thermal-sensors = <&tmu 4>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit: cpu-crit {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu2 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- map2 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu4 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- map3 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu6 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
serial0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
index c3c2be4f5072..ae15307f6e8b 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
@@ -68,4 +68,10 @@
reg = <0x80000 0x4000>, <0x4080000 0x4000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ bman-portal@90000 {
+ compatible = "fsl,bman-portal";
+ reg = <0x90000 0x4000>, <0x4090000 0x4000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
index 2a9aa060efda..6a93a4a9be0e 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
@@ -77,4 +77,11 @@
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
cell-index = <8>;
};
+
+ qportal9: qman-portal@90000 {
+ compatible = "fsl,qman-portal";
+ reg = <0x90000 0x4000>, <0x4090000 0x4000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ cell-index = <9>;
+ };
};
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 16:55:42 +0300