summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/pm34xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/pm34xx.c')
-rw-r--r--arch/arm/mach-omap2/pm34xx.c236
1 files changed, 130 insertions, 106 deletions
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 648b8c50d024..5b323f28da2d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -31,8 +31,8 @@
#include <linux/console.h>
#include <plat/sram.h>
-#include <plat/clockdomain.h>
-#include <plat/powerdomain.h>
+#include "clockdomain.h"
+#include "powerdomain.h"
#include <plat/serial.h>
#include <plat/sdrc.h>
#include <plat/prcm.h>
@@ -41,11 +41,11 @@
#include <asm/tlbflush.h>
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "sdrc.h"
#include "control.h"
@@ -68,6 +68,9 @@ static inline bool is_suspending(void)
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8
+/* pm34xx errata defined in pm.h */
+u16 pm34xx_errata;
+
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
@@ -102,12 +105,12 @@ static void omap3_enable_io_chain(void)
int timeout = 0;
if (omap_rev() >= OMAP3430_REV_ES3_1) {
- prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
PM_WKEN);
/* Do a readback to assure write has been done */
- prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+ omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
- while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
+ while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
OMAP3430_ST_IO_CHAIN_MASK)) {
timeout++;
if (timeout > 1000) {
@@ -115,7 +118,7 @@ static void omap3_enable_io_chain(void)
"activation failed.\n");
return;
}
- prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
+ omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
WKUP_MOD, PM_WKEN);
}
}
@@ -124,26 +127,17 @@ static void omap3_enable_io_chain(void)
static void omap3_disable_io_chain(void)
{
if (omap_rev() >= OMAP3430_REV_ES3_1)
- prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
PM_WKEN);
}
static void omap3_core_save_context(void)
{
- u32 control_padconf_off;
-
- /* Save the padconf registers */
- control_padconf_off = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
- control_padconf_off |= START_PADCONF_SAVE;
- omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
- /* wait for the save to complete */
- while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
- & PADCONF_SAVE_DONE))
- udelay(1);
+ omap3_ctrl_save_padconf();
/*
* Force write last pad into memory, as this can fail in some
- * cases according to erratas 1.157, 1.185
+ * cases according to errata 1.157, 1.185
*/
omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
@@ -218,27 +212,27 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
int c = 0;
- wkst = prm_read_mod_reg(module, wkst_off);
- wkst &= prm_read_mod_reg(module, grpsel_off);
+ wkst = omap2_prm_read_mod_reg(module, wkst_off);
+ wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
if (wkst) {
- iclk = cm_read_mod_reg(module, iclk_off);
- fclk = cm_read_mod_reg(module, fclk_off);
+ iclk = omap2_cm_read_mod_reg(module, iclk_off);
+ fclk = omap2_cm_read_mod_reg(module, fclk_off);
while (wkst) {
clken = wkst;
- cm_set_mod_reg_bits(clken, module, iclk_off);
+ omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
/*
* For USBHOST, we don't know whether HOST1 or
* HOST2 woke us up, so enable both f-clocks
*/
if (module == OMAP3430ES2_USBHOST_MOD)
clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
- cm_set_mod_reg_bits(clken, module, fclk_off);
- prm_write_mod_reg(wkst, module, wkst_off);
- wkst = prm_read_mod_reg(module, wkst_off);
+ omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
+ omap2_prm_write_mod_reg(wkst, module, wkst_off);
+ wkst = omap2_prm_read_mod_reg(module, wkst_off);
c++;
}
- cm_write_mod_reg(iclk, module, iclk_off);
- cm_write_mod_reg(fclk, module, fclk_off);
+ omap2_cm_write_mod_reg(iclk, module, iclk_off);
+ omap2_cm_write_mod_reg(fclk, module, fclk_off);
}
return c;
@@ -281,9 +275,9 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
u32 irqenable_mpu, irqstatus_mpu;
int c = 0;
- irqenable_mpu = prm_read_mod_reg(OCP_MOD,
+ irqenable_mpu = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
irqstatus_mpu &= irqenable_mpu;
@@ -304,10 +298,10 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
"no code to handle it (%08x)\n", irqstatus_mpu);
}
- prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+ omap2_prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
irqstatus_mpu &= irqenable_mpu;
@@ -357,6 +351,7 @@ void omap_sram_idle(void)
int mpu_next_state = PWRDM_POWER_ON;
int per_next_state = PWRDM_POWER_ON;
int core_next_state = PWRDM_POWER_ON;
+ int per_going_off;
int core_prev_state, per_prev_state;
u32 sdrc_pwr = 0;
@@ -395,7 +390,7 @@ void omap_sram_idle(void)
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
core_next_state < PWRDM_POWER_ON)) {
- prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
omap3_enable_io_chain();
}
@@ -408,9 +403,10 @@ void omap_sram_idle(void)
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
+ per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
omap_uart_prepare_idle(2);
omap_uart_prepare_idle(3);
- omap2_gpio_prepare_for_idle(per_next_state);
+ omap2_gpio_prepare_for_idle(per_going_off);
if (per_next_state == PWRDM_POWER_OFF)
omap3_per_save_context();
}
@@ -421,7 +417,7 @@ void omap_sram_idle(void)
omap_uart_prepare_idle(1);
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
- omap3_prcm_save_context();
+ omap3_cm_save_context();
}
}
@@ -430,7 +426,7 @@ void omap_sram_idle(void)
/*
* On EMU/HS devices ROM code restores a SRDC value
* from scratchpad which has automatic self refresh on timeout
- * of AUTO_CNT = 1 enabled. This takes care of errata 1.142.
+ * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
* Hence store/restore the SDRC_POWER register here.
*/
if (omap_rev() >= OMAP3430_REV_ES3_0 &&
@@ -461,14 +457,14 @@ void omap_sram_idle(void)
core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
if (core_prev_state == PWRDM_POWER_OFF) {
omap3_core_restore_context();
- omap3_prcm_restore_context();
+ omap3_cm_restore_context();
omap3_sram_restore_context();
omap2_sms_restore_context();
}
omap_uart_resume_idle(0);
omap_uart_resume_idle(1);
if (core_next_state == PWRDM_POWER_OFF)
- prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
+ omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
OMAP3430_GR_MOD,
OMAP3_PRM_VOLTCTRL_OFFSET);
}
@@ -492,7 +488,8 @@ console_still_active:
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
core_next_state < PWRDM_POWER_ON)) {
- prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
+ omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+ PM_WKEN);
omap3_disable_io_chain();
}
@@ -529,12 +526,6 @@ out:
}
#ifdef CONFIG_SUSPEND
-static int omap3_pm_prepare(void)
-{
- disable_hlt();
- return 0;
-}
-
static int omap3_pm_suspend(void)
{
struct power_state *pwrst;
@@ -597,14 +588,10 @@ static int omap3_pm_enter(suspend_state_t unused)
return ret;
}
-static void omap3_pm_finish(void)
-{
- enable_hlt();
-}
-
/* Hooks to enable / disable UART interrupts during suspend */
static int omap3_pm_begin(suspend_state_t state)
{
+ disable_hlt();
suspend_state = state;
omap_uart_enable_irqs(0);
return 0;
@@ -614,15 +601,14 @@ static void omap3_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
omap_uart_enable_irqs(1);
+ enable_hlt();
return;
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap3_pm_begin,
.end = omap3_pm_end,
- .prepare = omap3_pm_prepare,
.enter = omap3_pm_enter,
- .finish = omap3_pm_finish,
.valid = suspend_valid_only_mem,
};
#endif /* CONFIG_SUSPEND */
@@ -641,21 +627,21 @@ static struct platform_suspend_ops omap_pm_ops = {
static void __init omap3_iva_idle(void)
{
/* ensure IVA2 clock is disabled */
- cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+ omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
/* if no clock activity, nothing else to do */
- if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+ if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
OMAP3430_CLKACTIVITY_IVA2_MASK))
return;
/* Reset IVA2 */
- prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+ omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
OMAP3430_RST2_IVA2_MASK |
OMAP3430_RST3_IVA2_MASK,
OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
/* Enable IVA2 clock */
- cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
+ omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
OMAP3430_IVA2_MOD, CM_FCLKEN);
/* Set IVA2 boot mode to 'idle' */
@@ -663,13 +649,13 @@ static void __init omap3_iva_idle(void)
OMAP343X_CONTROL_IVA2_BOOTMOD);
/* Un-reset IVA2 */
- prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+ omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
/* Disable IVA2 clock */
- cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+ omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
/* Reset IVA2 */
- prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+ omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
OMAP3430_RST2_IVA2_MASK |
OMAP3430_RST3_IVA2_MASK,
OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
@@ -693,10 +679,10 @@ static void __init omap3_d2d_idle(void)
omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
/* reset modem */
- prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
+ omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
CORE_MOD, OMAP2_RM_RSTCTRL);
- prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
}
static void __init prcm_setup_regs(void)
@@ -711,23 +697,23 @@ static void __init prcm_setup_regs(void)
/* XXX Reset all wkdeps. This should be done when initializing
* powerdomains */
- prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
- prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
- prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
- prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
- prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
- prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+ omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+ omap2_prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+ omap2_prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+ omap2_prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+ omap2_prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+ omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
- prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+ omap2_prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+ omap2_prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
} else
- prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+ omap2_prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
/*
* Enable interface clock autoidle for all modules.
* Note that in the long run this should be done by clockfw
*/
- cm_write_mod_reg(
+ omap2_cm_write_mod_reg(
OMAP3430_AUTO_MODEM_MASK |
OMAP3430ES2_AUTO_MMC3_MASK |
OMAP3430ES2_AUTO_ICR_MASK |
@@ -760,7 +746,7 @@ static void __init prcm_setup_regs(void)
OMAP3430_AUTO_SSI_MASK,
CORE_MOD, CM_AUTOIDLE1);
- cm_write_mod_reg(
+ omap2_cm_write_mod_reg(
OMAP3430_AUTO_PKA_MASK |
OMAP3430_AUTO_AES1_MASK |
OMAP3430_AUTO_RNG_MASK |
@@ -769,13 +755,13 @@ static void __init prcm_setup_regs(void)
CORE_MOD, CM_AUTOIDLE2);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- cm_write_mod_reg(
+ omap2_cm_write_mod_reg(
OMAP3430_AUTO_MAD2D_MASK |
OMAP3430ES2_AUTO_USBTLL_MASK,
CORE_MOD, CM_AUTOIDLE3);
}
- cm_write_mod_reg(
+ omap2_cm_write_mod_reg(
OMAP3430_AUTO_WDT2_MASK |
OMAP3430_AUTO_WDT1_MASK |
OMAP3430_AUTO_GPIO1_MASK |
@@ -784,17 +770,17 @@ static void __init prcm_setup_regs(void)
OMAP3430_AUTO_GPT1_MASK,
WKUP_MOD, CM_AUTOIDLE);
- cm_write_mod_reg(
+ omap2_cm_write_mod_reg(
OMAP3430_AUTO_DSS_MASK,
OMAP3430_DSS_MOD,
CM_AUTOIDLE);
- cm_write_mod_reg(
+ omap2_cm_write_mod_reg(
OMAP3430_AUTO_CAM_MASK,
OMAP3430_CAM_MOD,
CM_AUTOIDLE);
- cm_write_mod_reg(
+ omap2_cm_write_mod_reg(
omap3630_auto_uart4_mask |
OMAP3430_AUTO_GPIO6_MASK |
OMAP3430_AUTO_GPIO5_MASK |
@@ -818,7 +804,7 @@ static void __init prcm_setup_regs(void)
CM_AUTOIDLE);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- cm_write_mod_reg(
+ omap2_cm_write_mod_reg(
OMAP3430ES2_AUTO_USBHOST_MASK,
OMAP3430ES2_USBHOST_MOD,
CM_AUTOIDLE);
@@ -830,16 +816,16 @@ static void __init prcm_setup_regs(void)
* Set all plls to autoidle. This is needed until autoidle is
* enabled by clockfw
*/
- cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+ omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
- cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+ omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
MPU_MOD,
CM_AUTOIDLE2);
- cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+ omap2_cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
(1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
PLL_MOD,
CM_AUTOIDLE);
- cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+ omap2_cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
PLL_MOD,
CM_AUTOIDLE2);
@@ -848,31 +834,31 @@ static void __init prcm_setup_regs(void)
* sys_clkreq. In the long run clock framework should
* take care of this.
*/
- prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+ omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
1 << OMAP_AUTOEXTCLKMODE_SHIFT,
OMAP3430_GR_MOD,
OMAP3_PRM_CLKSRC_CTRL_OFFSET);
/* setup wakup source */
- prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
+ omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
WKUP_MOD, PM_WKEN);
/* No need to write EN_IO, that is always enabled */
- prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
+ omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
OMAP3430_GRPSEL_GPT1_MASK |
OMAP3430_GRPSEL_GPT12_MASK,
WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
/* For some reason IO doesn't generate wakeup event even if
* it is selected to mpu wakeup goup */
- prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK,
+ omap2_prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* Enable PM_WKEN to support DSS LPR */
- prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
+ omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
OMAP3430_DSS_MOD, PM_WKEN);
/* Enable wakeups in PER */
- prm_write_mod_reg(omap3630_en_uart4_mask |
+ omap2_prm_write_mod_reg(omap3630_en_uart4_mask |
OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
@@ -880,7 +866,7 @@ static void __init prcm_setup_regs(void)
OMAP3430_EN_MCBSP4_MASK,
OMAP3430_PER_MOD, PM_WKEN);
/* and allow them to wake up MPU */
- prm_write_mod_reg(omap3630_grpsel_uart4_mask |
+ omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask |
OMAP3430_GRPSEL_GPIO2_MASK |
OMAP3430_GRPSEL_GPIO3_MASK |
OMAP3430_GRPSEL_GPIO4_MASK |
@@ -893,22 +879,22 @@ static void __init prcm_setup_regs(void)
OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
/* Don't attach IVA interrupts */
- prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
- prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
- prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
- prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+ omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
/* Clear any pending 'reset' flags */
- prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
- prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
- prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
+ omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
/* Clear any pending PRCM interrupts */
- prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
omap3_iva_idle();
omap3_d2d_idle();
@@ -925,12 +911,29 @@ void omap3_pm_off_mode_enable(int enable)
state = PWRDM_POWER_RET;
#ifdef CONFIG_CPU_IDLE
- omap3_cpuidle_update_states();
+ /*
+ * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
+ * enable OFF mode in a stable form for previous revisions, restrict
+ * instead to RET
+ */
+ if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583))
+ omap3_cpuidle_update_states(state, PWRDM_POWER_RET);
+ else
+ omap3_cpuidle_update_states(state, state);
#endif
list_for_each_entry(pwrst, &pwrst_list, node) {
- pwrst->next_state = state;
- omap_set_pwrdm_state(pwrst->pwrdm, state);
+ if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) &&
+ pwrst->pwrdm == core_pwrdm &&
+ state == PWRDM_POWER_OFF) {
+ pwrst->next_state = PWRDM_POWER_RET;
+ WARN_ONCE(1,
+ "%s: Core OFF disabled due to errata i583\n",
+ __func__);
+ } else {
+ pwrst->next_state = state;
+ }
+ omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
}
}
@@ -1002,6 +1005,17 @@ void omap_push_sram_idle(void)
save_secure_ram_context_sz);
}
+static void __init pm_errata_configure(void)
+{
+ if (cpu_is_omap3630()) {
+ pm34xx_errata |= PM_RTA_ERRATUM_i608;
+ /* Enable the l2 cache toggling in sleep logic */
+ enable_omap3630_toggle_l2_on_restore();
+ if (omap_rev() < OMAP3630_REV_ES1_2)
+ pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+ }
+}
+
static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
@@ -1011,6 +1025,8 @@ static int __init omap3_pm_init(void)
if (!cpu_is_omap34xx())
return -ENODEV;
+ pm_errata_configure();
+
printk(KERN_ERR "Power Management for TI OMAP3.\n");
/* XXX prcm_setup_regs needs to be before enabling hw
@@ -1058,6 +1074,14 @@ static int __init omap3_pm_init(void)
pm_idle = omap3_pm_idle;
omap3_idle_init();
+ /*
+ * RTA is disabled during initialization as per erratum i608
+ * it is safer to disable RTA by the bootloader, but we would like
+ * to be doubly sure here and prevent any mishaps.
+ */
+ if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
+ omap3630_ctrl_disable_rta();
+
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 08:34:10 +0300