diff options
Diffstat (limited to 'arch/arm/mach-omap2/gpmc-smc91x.c')
| -rw-r--r-- | arch/arm/mach-omap2/gpmc-smc91x.c | 186 |
1 files changed, 0 insertions, 186 deletions
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c deleted file mode 100644 index 61a063595e66..000000000000 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/gpmc-smc91x.c - * - * Copyright (C) 2009 Nokia Corporation - * Contact: Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/smc91x.h> - -#include "gpmc.h" -#include "gpmc-smc91x.h" - -#include "soc.h" - -static struct omap_smc91x_platform_data *gpmc_cfg; - -static struct resource gpmc_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct smc91x_platdata gpmc_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct platform_device gpmc_smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &gpmc_smc91x_info, - }, - .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), - .resource = gpmc_smc91x_resources, -}; - -static struct gpmc_settings smc91x_settings = { - .device_width = GPMC_DEVWIDTH_16BIT, -}; - -/* - * Set the gpmc timings for smc91c96. The timings are taken - * from the data sheet available at: - * http://www.smsc.com/main/catalog/lan91c96.html - * REVISIT: Level shifters can add at least to the access latency. - */ -static int smc91c96_gpmc_retime(void) -{ - struct gpmc_timings t; - struct gpmc_device_timings dev_t; - const int t3 = 10; /* Figure 12.2 read and 12.4 write */ - const int t4_r = 20; /* Figure 12.2 read */ - const int t4_w = 5; /* Figure 12.4 write */ - const int t5 = 25; /* Figure 12.2 read */ - const int t6 = 15; /* Figure 12.2 read */ - const int t7 = 5; /* Figure 12.4 write */ - const int t8 = 5; /* Figure 12.4 write */ - const int t20 = 185; /* Figure 12.2 read and 12.4 write */ - - /* - * FIXME: Calculate the address and data bus muxed timings. - * Note that at least adv_rd_off needs to be changed according - * to omap3430 TRM Figure 11-11. Are the sdp boards using the - * FPGA in between smc91x and omap as the timings are different - * from above? - */ - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - return 0; - - memset(&dev_t, 0, sizeof(dev_t)); - - dev_t.t_oeasu = t3 * 1000; - dev_t.t_oe = t5 * 1000; - dev_t.t_cez_r = t4_r * 1000; - dev_t.t_oez = t6 * 1000; - dev_t.t_rd_cycle = (t20 - t3) * 1000; - - dev_t.t_weasu = t3 * 1000; - dev_t.t_wpl = t7 * 1000; - dev_t.t_wph = t8 * 1000; - dev_t.t_cez_w = t4_w * 1000; - dev_t.t_wr_cycle = (t20 - t3) * 1000; - - gpmc_calc_timings(&t, &smc91x_settings, &dev_t); - - return gpmc_cs_set_timings(gpmc_cfg->cs, &t); -} - -/* - * Initialize smc91x device connected to the GPMC. Note that we - * assume that pin multiplexing is done in the board-*.c file, - * or in the bootloader. - */ -void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) -{ - unsigned long cs_mem_base; - int ret; - - gpmc_cfg = board_data; - - if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96) - gpmc_cfg->retime = smc91c96_gpmc_retime; - - if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - gpmc_smc91x_resources[0].start = cs_mem_base + 0x300; - gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; - gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); - - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - smc91x_settings.mux_add_data = GPMC_MUX_AD; - if (gpmc_cfg->flags & GPMC_READ_MON) - smc91x_settings.wait_on_read = true; - if (gpmc_cfg->flags & GPMC_WRITE_MON) - smc91x_settings.wait_on_write = true; - if (gpmc_cfg->wait_pin) - smc91x_settings.wait_pin = gpmc_cfg->wait_pin; - ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings); - if (ret < 0) - goto free1; - - if (gpmc_cfg->retime) { - ret = gpmc_cfg->retime(); - if (ret != 0) - goto free1; - } - - if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0) - goto free1; - - gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); - - if (gpmc_cfg->gpio_pwrdwn) { - ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn, - GPIOF_OUT_INIT_LOW, "SMC91X powerdown"); - if (ret) - goto free2; - } - - if (gpmc_cfg->gpio_reset) { - ret = gpio_request_one(gpmc_cfg->gpio_reset, - GPIOF_OUT_INIT_LOW, "SMC91X reset"); - if (ret) - goto free3; - - gpio_set_value(gpmc_cfg->gpio_reset, 1); - msleep(100); - gpio_set_value(gpmc_cfg->gpio_reset, 0); - } - - if (platform_device_register(&gpmc_smc91x_device) < 0) { - printk(KERN_ERR "Unable to register smc91x device\n"); - gpio_free(gpmc_cfg->gpio_reset); - goto free3; - } - - return; - -free3: - if (gpmc_cfg->gpio_pwrdwn) - gpio_free(gpmc_cfg->gpio_pwrdwn); -free2: - gpio_free(gpmc_cfg->gpio_irq); -free1: - gpmc_cs_free(gpmc_cfg->cs); - - printk(KERN_ERR "Could not initialize smc91x\n"); -} |