diff options
Diffstat (limited to 'arch/arm/boot')
88 files changed, 2062 insertions, 331 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 066b03480b63..3a8b32df6b31 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -60,11 +60,6 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_S3C24XX) - .macro loadsp, rb, tmp - mov \rb, #0x50000000 - add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT - .endm #else .macro loadsp, rb, tmp addruart \rb, \tmp diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3220e2968352..ff7a04b68d88 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -50,11 +50,11 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb +dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb -dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb -dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ berlin2cd-google-chromecast.dtb @@ -247,6 +247,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-sbc-t3730.dtb \ omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ + omap3-beagle-xm-ab.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ omap3-ldp.dtb \ @@ -290,23 +291,18 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am43x-epos-evm.dtb \ am437x-gp-evm.dtb \ dra7-evm.dtb -dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb +dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ + orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-maxtor-shared-storage-2.dtb \ + orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-apq8074-dragonboard.dtb -dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ - ste-hrefprev60-stuib.dtb \ - ste-hrefprev60-tvk.dtb \ - ste-hrefv60plus-stuib.dtb \ - ste-hrefv60plus-tvk.dtb \ - ste-ccu8540.dtb \ - ste-ccu9540.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ - r7s72100-genmai.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ r7s72100-genmai-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ @@ -370,9 +366,16 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-cardhu-a04.dtb \ tegra114-dalmore.dtb \ tegra124-venice2.dtb +dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb +dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ + ste-hrefprev60-stuib.dtb \ + ste-hrefprev60-tvk.dtb \ + ste-hrefv60plus-stuib.dtb \ + ste-hrefv60plus-tvk.dtb \ + ste-ccu8540.dtb \ + ste-ccu9540.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb -dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index e3f27ec31718..2e7d932887b5 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -183,7 +183,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -204,7 +204,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 28ae040e7c3d..6028217ace0f 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -301,8 +301,8 @@ am335x_evm_audio_pins: am335x_evm_audio_pins { pinctrl-single,pins = < - 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */ - 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ >; @@ -331,7 +331,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -352,7 +352,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ec08f6f677c3..ab238850a7b2 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -364,7 +364,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -385,7 +385,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 7063311a58d9..9f22c189f636 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -118,7 +118,6 @@ reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; @@ -202,7 +201,7 @@ &usb { status = "okay"; - control@44e10000 { + control@44e10620 { status = "okay"; }; @@ -223,7 +222,7 @@ dr_mode = "host"; }; - dma-controller@07402000 { + dma-controller@47402000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9770e35f2536..cb6811e5ae5a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -72,7 +72,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -94,8 +94,8 @@ /* * XXX: Use a flat representation of the AM33XX interconnect. - * The real AM33XX interconnect network is quite complex.Since - * that will not bring real advantage to represent that in DT + * The real AM33XX interconnect network is quite complex. Since + * it will not bring real advantage to represent that in DT * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ @@ -802,7 +802,7 @@ <0x46000000 0x400000>; reg-names = "mpu", "dat"; interrupts = <80>, <81>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8>, <&edma 9>; @@ -816,7 +816,7 @@ <0x46400000 0x400000>; reg-names = "mpu", "dat"; interrupts = <82>, <83>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10>, <&edma 11>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 36d523a26831..d1f8707ff1df 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -691,7 +691,7 @@ <0x46000000 0x400000>; reg-names = "mpu", "dat"; interrupts = <80>, <81>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8>, <&edma 9>; @@ -705,7 +705,7 @@ <0x46400000 0x400000>; reg-names = "mpu", "dat"; interrupts = <82>, <83>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10>, <&edma 11>; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index bbb40f62037d..bb77970c0b12 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -230,6 +230,7 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x72004 0x4>; + clocks = <&gateclk 4>; }; eth1: ethernet@74000 { diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index a064f59da02d..ca8813bb99ba 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -336,6 +336,7 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x72004 0x4>; + clocks = <&gateclk 4>; }; coredivclk: clock@e4250 { diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index a542d5837a17..27ebb0f722fd 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -32,11 +32,6 @@ status = "okay"; }; - - tsadcc: tsadcc@f804c000 { - status = "okay"; - }; - rtc@fffffeb0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index ce1375595e5f..f1a11193fba2 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -21,6 +21,14 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { mmc0: mmc@f0000000 { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index e21dda0e8986..561addceb81e 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -45,6 +45,18 @@ reg = <0x20000000 0x08000000>; }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -524,17 +536,24 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { + slow_rc_osc: slow_rc_osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9260-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_xtal>; }; main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 2ce527e70c7a..c6683ea8b743 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -20,6 +20,10 @@ reg = <0x20000000 0x4000000>; }; + main_xtal { + clock-frequency = <18432000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 63e1784d272c..a19a7c26a7fc 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -48,6 +48,18 @@ reg = <0x20000000 0x04000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -548,17 +560,11 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { @@ -769,6 +775,32 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index cddb37825fad..b3b89baf972e 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -20,6 +20,15 @@ reg = <0x20000000 0x4000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts new file mode 100644 index 000000000000..a9d60471d9ff --- /dev/null +++ b/arch/arm/boot/dts/axm5516-amarillo.dts @@ -0,0 +1,51 @@ +/* + * arch/arm/boot/dts/axm5516-amarillo.dts + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; + +/memreserve/ 0x00000000 0x00400000; + +#include "axm55xx.dtsi" +#include "axm5516-cpus.dtsi" + +/ { + model = "Amarillo AXM5516"; + compatible = "lsi,axm5516-amarillo", "lsi,axm5516"; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0x02 0x00000000>; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi new file mode 100644 index 000000000000..b85f360cb125 --- /dev/null +++ b/arch/arm/boot/dts/axm5516-cpus.dtsi @@ -0,0 +1,204 @@ +/* + * arch/arm/boot/dts/axm5516-cpus.dtsi + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + cluster2 { + core0 { + cpu = <&CPU8>; + }; + core1 { + cpu = <&CPU9>; + }; + core2 { + cpu = <&CPU10>; + }; + core3 { + cpu = <&CPU11>; + }; + }; + cluster3 { + core0 { + cpu = <&CPU12>; + }; + core1 { + cpu = <&CPU13>; + }; + core2 { + cpu = <&CPU14>; + }; + core3 { + cpu = <&CPU15>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x00>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x01>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x02>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x03>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x100>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x101>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x102>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x103>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x200>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x201>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU10: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x202>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU11: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x203>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU12: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x300>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU13: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x301>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU14: cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x302>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU15: cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x303>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + }; +}; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi new file mode 100644 index 000000000000..ea288f0a1d39 --- /dev/null +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -0,0 +1,204 @@ +/* + * arch/arm/boot/dts/axm55xx.dtsi + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/lsi,axm5516-clks.h> + +#include "skeleton64.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + timer = &timer0; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clk_ref0: clk_ref0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_ref1: clk_ref1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_ref2: clk_ref2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clks: clock-controller@2010020000 { + compatible = "lsi,axm5516-clks"; + #clock-cells = <1>; + reg = <0x20 0x10020000 0 0x20000>; + }; + }; + + gic: interrupt-controller@2001001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x20 0x01001000 0 0x1000>, + <0x20 0x01002000 0 0x1000>, + <0x20 0x01004000 0 0x2000>, + <0x20 0x01006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + device_type = "soc"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + ranges; + + syscon: syscon@2010030000 { + compatible = "lsi,axxia-syscon", "syscon"; + reg = <0x20 0x10030000 0 0x2000>; + }; + + reset: reset@2010031000 { + compatible = "lsi,axm55xx-reset"; + syscon = <&syscon>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + serial0: uart@2010080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10080000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial1: uart@2010081000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10081000 0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial2: uart@2010082000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10082000 0 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial3: uart@2010083000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10083000 0 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + timer0: timer@2010091000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x20 0x10091000 0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "okay"; + }; + + gpio0: gpio@2010092000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x20 0x10092000 0x00 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio1: gpio@2010093000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x20 0x10093000 0x00 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + }; +}; + +/* + Local Variables: + mode: C + End: +*/ diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 1c0f8e1893ae..149b55099935 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -80,7 +80,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -94,7 +94,7 @@ /* * XXX: Use a flat representation of the SOC interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index e96da9a898ad..cfb8fc753f50 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1640,7 +1640,7 @@ #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; - ti,bit-shift = <28>; + ti,bit-shift = <24>; reg = <0x1860>; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 80a3bf4c5986..896a2a6619e0 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -364,16 +364,4 @@ gpio-key,wakeup; }; }; - - amba { - mdma1: mdma@11C10000 { - /* - * MDMA1 can support both secure and non-secure - * AXI transactions. When this is enabled in the kernel - * for boards that run in secure mode, we are getting - * imprecise external aborts causing the kernel to oops. - */ - status = "disabled"; - }; - }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 00d541a1a3d4..638efd5a8456 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -264,16 +264,6 @@ reg = <0x100440C0 0x20>; }; - mau_pd: power-domain@100440E0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100440E0 0x20>; - }; - - g2d_pd: power-domain@10044100 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044100 0x20>; - }; - msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; @@ -381,6 +371,13 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; + /* + * MDMA1 can support both secure and non-secure + * AXI transactions. When this is enabled in the kernel + * for boards that run in secure mode, we are getting + * imprecise external aborts causing the kernel to oops. + */ + status = "disabled"; }; }; @@ -594,7 +591,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c4_hs_bus>; - clocks = <&clock CLK_I2C4>; + clocks = <&clock CLK_USI0>; clock-names = "hsi2c"; status = "disabled"; }; @@ -607,7 +604,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c5_hs_bus>; - clocks = <&clock CLK_I2C5>; + clocks = <&clock CLK_USI1>; clock-names = "hsi2c"; status = "disabled"; }; @@ -620,7 +617,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c6_hs_bus>; - clocks = <&clock CLK_I2C6>; + clocks = <&clock CLK_USI2>; clock-names = "hsi2c"; status = "disabled"; }; @@ -633,7 +630,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c7_hs_bus>; - clocks = <&clock CLK_I2C7>; + clocks = <&clock CLK_USI3>; clock-names = "hsi2c"; status = "disabled"; }; @@ -646,7 +643,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c8_hs_bus>; - clocks = <&clock CLK_I2C8>; + clocks = <&clock CLK_USI4>; clock-names = "hsi2c"; status = "disabled"; }; @@ -659,7 +656,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c9_hs_bus>; - clocks = <&clock CLK_I2C9>; + clocks = <&clock CLK_USI5>; clock-names = "hsi2c"; status = "disabled"; }; @@ -672,7 +669,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c10_hs_bus>; - clocks = <&clock CLK_I2C10>; + clocks = <&clock CLK_USI6>; clock-names = "hsi2c"; status = "disabled"; }; @@ -775,6 +772,5 @@ interrupts = <0 112 0>; clocks = <&clock 471>; clock-names = "secss"; - samsung,power-domain = <&g2d_pd>; }; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 32f760e24898..ea323f09dc78 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -56,6 +56,7 @@ osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index 09f57b39e3ef..73aae4f5e539 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -29,6 +29,7 @@ osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 6279e0b4f768..137e010eab35 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -48,6 +48,7 @@ osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 0c75fe3deb35..9c89d1ca97c2 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -53,21 +53,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 5f8216d08f6b..150bb4e2f744 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -50,21 +50,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index f6d3ac3e5587..d5d146a8b149 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -17,7 +17,8 @@ compatible = "denx,imx53-m53evk", "fsl,imx53"; memory { - reg = <0x70000000 0x20000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; soc { @@ -193,17 +194,17 @@ irq-trigger = <0x1>; stmpe_touchscreen { - compatible = "stmpe,ts"; + compatible = "st,stmpe-ts"; reg = <0>; - ts,sample-time = <4>; - ts,mod-12b = <1>; - ts,ref-sel = <0>; - ts,adc-freq = <1>; - ts,ave-ctrl = <3>; - ts,touch-det-delay = <3>; - ts,settling = <4>; - ts,fraction-z = <7>; - ts,i-drive = <1>; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <3>; + st,touch-det-delay = <3>; + st,settling = <4>; + st,fraction-z = <7>; + st,i-drive = <1>; }; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 3f825a6813da..ede04fa4161f 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -14,7 +14,8 @@ / { memory { - reg = <0x70000000 0x40000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; display0: display@di0 { diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 0217dde3b36b..3b73e81dc3f0 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -25,12 +25,17 @@ soc { display: display@di0 { compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 0>; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgb24_vga1>; status = "okay"; + port { + display0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + display-timings { VGA { clock-frequency = <25200000>; @@ -293,6 +298,10 @@ }; }; +&ipu_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + &kpp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_kpp>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index b57ab57740f6..9c2bff2252d0 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -70,21 +70,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; @@ -430,7 +434,7 @@ port { lvds1_in: endpoint { - remote-endpoint = <&ipu_di0_lvds0>; + remote-endpoint = <&ipu_di1_lvds1>; }; }; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index a63bbb3d46bb..e4ae38fd0269 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -19,7 +19,10 @@ compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; aliases { - gpio7 = &stmpe_gpio; + gpio7 = &stmpe_gpio1; + gpio8 = &stmpe_gpio2; + stmpe-i2c0 = &stmpe1; + stmpe-i2c1 = &stmpe2; }; memory { @@ -40,13 +43,15 @@ regulator-always-on; }; - reg_usb_otg_vbus: regulator@1 { + reg_usb_otg_switch: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "usb_otg_vbus"; + regulator-name = "usb_otg_switch"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio7 12 0>; + regulator-boot-on; + regulator-always-on; }; reg_usb_host1: regulator@2 { @@ -65,23 +70,23 @@ led-blue { label = "blue"; - gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-green { label = "green"; - gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>; }; led-pink { label = "pink"; - gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>; }; led-red { label = "red"; - gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>; }; }; }; @@ -99,7 +104,8 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2 - &pinctrl_stmpe>; + &pinctrl_stmpe1 + &pinctrl_stmpe2>; status = "okay"; pmic: pfuze100@08 { @@ -205,13 +211,25 @@ }; }; - stmpe: stmpe1601@40 { + stmpe1: stmpe1601@40 { compatible = "st,stmpe1601"; reg = <0x40>; interrupts = <30 0>; interrupt-parent = <&gpio3>; - stmpe_gpio: stmpe_gpio { + stmpe_gpio1: stmpe_gpio { + #gpio-cells = <2>; + compatible = "st,stmpe-gpio"; + }; + }; + + stmpe2: stmpe1601@44 { + compatible = "st,stmpe1601"; + reg = <0x44>; + interrupts = <2 0>; + interrupt-parent = <&gpio5>; + + stmpe_gpio2: stmpe_gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; }; @@ -273,10 +291,14 @@ >; }; - pinctrl_stmpe: stmpegrp { + pinctrl_stmpe1: stmpe1grp { fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>; }; + pinctrl_stmpe2: stmpe2grp { + fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -293,7 +315,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; }; @@ -344,11 +366,11 @@ &usbh1 { vbus-supply = <®_usb_host1>; disable-over-current; + dr_mode = "host"; status = "okay"; }; &usbotg { - vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 902f98310481..e51bb3f0fd56 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -487,9 +487,6 @@ &ldb { status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; - }; }; &pcie { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 8e99c9a9bc76..035d3a85c318 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -436,9 +436,6 @@ &ldb { status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>; - }; }; &pcie { diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index a3cb2fff8f61..d16066608e21 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -26,25 +26,25 @@ /* GPIO16 -> AR8035 25MHz */ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 pin strapping: IO voltage: pull up */ - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 /* AR8035 pin strapping: PHYADDR#0: pull down */ - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 /* AR8035 pin strapping: PHYADDR#1: pull down */ - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 /* AR8035 pin strapping: MODE#1: pull up */ - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 /* * As the RMII pins are also connected to RGMII diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 55cb926fa3f7..eca0971d4db1 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -10,6 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/interrupt-controller/arm-gic.h> + #include "skeleton.dtsi" / { @@ -46,8 +48,6 @@ intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; @@ -59,16 +59,19 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; @@ -138,6 +141,12 @@ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 864d8dfb51ca..a8d9a93fab85 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -282,6 +282,7 @@ MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 >; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3cb4941afeef..d26b099260a3 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -68,8 +68,6 @@ intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; @@ -81,11 +79,13 @@ ckil { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; osc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index 40791053106b..6becedebaa4e 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -75,7 +75,7 @@ m25p16@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p16"; + compatible = "st,m25p16"; reg = <0>; spi-max-frequency = <40000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 0e06fd3cee4d..3b62aeeaa3a2 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -46,7 +46,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l4005a"; + compatible = "mxicy,mx25l4005a"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index ef3463e0ae19..28b3ee369778 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -43,7 +43,7 @@ m25p40@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l1606e"; + compatible = "mxicy,mx25l1606e"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index c9e82eff9bf2..6761ffa2c4ab 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -48,7 +48,7 @@ status = "okay"; eeprom@50 { - compatible = "at,24c04"; + compatible = "atmel,24c04"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 2cb0dc529165..32c6fb4a1162 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -56,7 +56,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l12805d"; + compatible = "mxicy,mx25l12805d"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 743152f31a81..e6e5ec4fe6b9 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -32,7 +32,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l4005a"; + compatible = "mxicy,mx25l4005a"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; @@ -50,7 +50,7 @@ status = "okay"; eeprom@50 { - compatible = "at,24c04"; + compatible = "atmel,24c04"; pagesize = <16>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 03fa24cf3344..0a07af9d8e58 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -104,7 +104,7 @@ status = "okay"; adt7476: adt7476a@2e { - compatible = "adt7476"; + compatible = "adi,adt7476"; reg = <0x2e>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index a5e779452867..27ca6a79c48a 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -94,7 +94,7 @@ status = "okay"; lm85: lm85@2e { - compatible = "lm85"; + compatible = "national,lm85"; reg = <0x2e>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index b88da9392c32..0650beafc1de 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -40,7 +40,7 @@ pinctrl-names = "default"; s35390a: s35390a@30 { - compatible = "s35390a"; + compatible = "sii,s35390a"; reg = <0x30>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index b2f7cae06839..38520a287514 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -52,7 +52,7 @@ pinctrl-names = "default"; s24c02: s24c02@50 { - compatible = "24c02"; + compatible = "atmel,24c02"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts new file mode 100644 index 000000000000..7ac3bcf59d59 --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-beagle-xm.dts" + +/ { + /* HS USB Port 2 Power enable was inverted with the xM C */ + hsusb2_power: hsusb2_power_reg { + enable-active-high; + }; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index bf5a515a3247..da402f0fdab4 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -112,7 +112,6 @@ reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <16>; - gpmc,device-nand; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 4df68ad3736a..9cba94bed7ad 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -89,7 +89,16 @@ status = "disabled"; }; +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; +}; + &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 0abe986a4ecc..476ff158ddb3 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -234,6 +234,10 @@ }; }; +&uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + &usb_otg_hs { pinctrl-names = "default"; pinctrl-0 = <&musb_pins>; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 6369d9f43ca2..cc1dce6978f5 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -368,7 +368,6 @@ /* no elm on omap3 */ gpmc,mux-add-data = <0>; - gpmc,device-nand; gpmc,device-width = <2>; gpmc,wait-pin = <0>; gpmc,wait-monitoring-ns = <0>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 1a57b61f5e24..150ca097c02d 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -21,6 +21,17 @@ }; }; + leds { + compatible = "gpio-leds"; + heartbeat { + label = "debug::sleep"; + gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */ + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&debug_leds>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -130,6 +141,12 @@ >; }; + debug_leds: pinmux_debug_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ @@ -618,11 +635,13 @@ }; &uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 5e5790f631eb..8a0ce605fdd8 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -74,7 +74,7 @@ /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ @@ -267,7 +267,7 @@ uart1: serial@4806a000 { compatible = "ti,omap3-uart"; reg = <0x4806a000 0x2000>; - interrupts = <72>; + interrupts-extended = <&intc 72>; dmas = <&sdma 49 &sdma 50>; dma-names = "tx", "rx"; ti,hwmods = "uart1"; @@ -277,7 +277,7 @@ uart2: serial@4806c000 { compatible = "ti,omap3-uart"; reg = <0x4806c000 0x400>; - interrupts = <73>; + interrupts-extended = <&intc 73>; dmas = <&sdma 51 &sdma 52>; dma-names = "tx", "rx"; ti,hwmods = "uart2"; @@ -287,7 +287,7 @@ uart3: serial@49020000 { compatible = "ti,omap3-uart"; reg = <0x49020000 0x400>; - interrupts = <74>; + interrupts-extended = <&intc 74>; dmas = <&sdma 53 &sdma 54>; dma-names = "tx", "rx"; ti,hwmods = "uart3"; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index d2c45bfaaa2c..8cfa3c8a72b0 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -481,6 +481,21 @@ usb-supply = <&vusb>; }; +&uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; +}; + +&uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; +}; + &usb_otg_hs { interface-type = <1>; mode = <3>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 48983c8d56c2..3e1da43068f6 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -570,16 +570,22 @@ }; &uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; &uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 27fcac874742..b22664544a09 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -72,7 +72,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -96,7 +96,7 @@ /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ @@ -311,7 +311,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -319,7 +319,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -327,7 +327,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 6f3de22fb266..f8c9855ce587 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -93,7 +93,7 @@ }; /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -107,7 +107,7 @@ /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. - * Since that will not bring real advantage to represent that in DT for + * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ @@ -813,6 +813,12 @@ <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb3phy>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts new file mode 100644 index 000000000000..c701e8d16bbb --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts @@ -0,0 +1,236 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "LaCie d2 Network"; + compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + front_button { + label = "Front Push Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + }; + + power_rocker_sw_on { + label = "Power rocker switch (on|auto)"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <1>; /* D2NET_SWITCH_POWER_ON */ + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + power_rocker_sw_off { + label = "Power rocker switch (auto|off)"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */ + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>; + pinctrl-names = "default"; + + sata0_power: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full512Kb"; + reg = <0 0x80000>; + read-only; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372b"; + reg = <0x32>; + }; + + fan@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + + /* Not enough HW info */ + status = "disabled"; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>; + pinctrl-names = "default"; + + pmx_board_id: pmx-board-id { + marvell,pins = "mpp0", "mpp1", "mpp2"; + marvell,function = "gpio"; + }; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp8", "mpp9", "mpp18"; + marvell,function = "gpio"; + }; + + pmx_fan_fail: pmx-fan-fail { + marvell,pins = "mpp5"; + marvell,function = "gpio"; + }; + + /* + * MPP6: Red front LED + * MPP16: Blue front LED blink control + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp6", "mpp16"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata0_power: pmx-sata0-power { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + pmx_sata1_power: pmx-sata1-power { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 5ed6c1376901..89ff404a528c 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -6,8 +6,19 @@ * warranty of any kind, whether express or implied. */ +/* + * TODO: add Orion USB device port init when kernel.org support is added. + * TODO: add flash write support: see below. + * TODO: add power-off support. + * TODO: add I2C EEPROM support. + */ + /dts-v1/; -/include/ "orion5x.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" / { model = "LaCie Ethernet Disk mini V2"; @@ -19,49 +30,84 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; }; - ocp@f1000000 { - serial@12000 { - clock-frequency = <166666667>; - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&pmx_power_button>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; button@1 { label = "Power-on Switch"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio0 18 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; }; - gpio_leds { + gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_power_led>; + pinctrl-names = "default"; led@1 { label = "power:blue"; - gpios = <&gpio0 16 1>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; }; -&mdio { +&devbus_bootcs { status = "okay"; - ethphy: ethernet-phy { - reg = <8>; + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full512Kb"; + reg = <0 0x80000>; + read-only; + }; }; }; +&ehci0 { + status = "okay"; +}; + ð { status = "okay"; @@ -69,3 +115,60 @@ phy-handle = <ðphy>; }; }; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>; + pinctrl-names = "default"; + + pmx_power_button: pmx-power-button { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_power_led: pmx-power-led { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_power_led_ctrl: pmx-power-led-ctrl { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts new file mode 100644 index 000000000000..ff3484904294 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Maxtor Shared Storage II"; + compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + power { + label = "Power"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x40000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + compatible = "st,m41t81"; + reg = <0x68>; + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_misc>; + pinctrl-names = "default"; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + + /* + * MPP0: Power LED + * MPP1: Error LED + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "gpio"; + }; + + /* + * MPP4: HDD ind. (Single/Dual) + * MPP5: HD0 5V control + * MPP6: HD0 12V control + * MPP7: HD1 5V control + * MPP8: HD1 12V control + */ + pmx_misc: pmx-misc { + marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi new file mode 100644 index 000000000000..d1ed71c60209 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include "orion5x.dtsi" + +/ { + compatible = "marvell,orion5x-88f5182", "marvell,orion5x"; + + soc { + compatible = "marvell,orion5x-88f5182-mbus", "simple-bus"; + + internal-regs { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f5182-pinctrl"; + reg = <0x10000 0x8>, <0x10050 0x4>; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp12", "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp13", "mpp15"; + marvell,function = "sata1"; + }; + }; + + core_clk: core-clocks@10030 { + compatible = "marvell,mv88f5182-core-clock"; + reg = <0x10010 0x4>; + #clock-cells = <1>; + }; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x1500 0x20>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts new file mode 100644 index 000000000000..6fb052507b36 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Marvell Reference Design 88F5182 NAS"; + compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>, + <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_debug_led>; + pinctrl-names = "default"; + + led@0 { + label = "rd88f5182:cpu"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + }; +}; + +&devbus_cs1 { + status = "okay"; + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <1>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + compatible = "dallas,ds1338"; + reg = <0x68>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios + &pmx_pci_gpios>; + pinctrl-names = "default"; + + /* + * MPP[20] PCI Clock to MV88F5182 + * MPP[21] PCI Clock to mini PCI CON11 + * MPP[22] USB 0 over current indication + * MPP[23] USB 1 over current indication + * MPP[24] USB 1 over current enable + * MPP[25] USB 0 over current enable + */ + + pmx_debug_led: pmx-debug_led { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_reset_switch: pmx-reset-switch { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_misc_gpios: pmx-misc-gpios { + marvell,pins = "mpp4", "mpp5"; + marvell,function = "gpio"; + }; + + pmx_pci_gpios: pmx-pci-gpios { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "gpio"; + }; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 174d89241f70..75cd01bd6024 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -6,7 +6,9 @@ * warranty of any kind, whether express or implied. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { model = "Marvell Orion5x SoC"; @@ -17,149 +19,214 @@ gpio0 = &gpio0; }; - intc: interrupt-controller { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020200 0x08>; - }; - - ocp@f1000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x4000000 - 0xf2200000 0xf2200000 0x0000800>; - #address-cells = <1>; + soc { + #address-cells = <2>; #size-cells = <1>; + controller = <&mbusc>; - gpio0: gpio@10100 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10100 0x40>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <6>, <7>, <8>, <9>; - }; - - spi@10600 { - compatible = "marvell,orion-spi"; + devbus_bootcs: devbus-bootcs { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>; + ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>; #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - reg = <0x10600 0x28>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; + devbus_cs0: devbus-cs0 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>; #address-cells = <1>; - #size-cells = <0>; - interrupts = <5>; - clock-frequency = <100000>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - serial@12000 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <3>; - /* set clock-frequency in board dts */ + devbus_cs1: devbus-cs1 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - serial@12100 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <4>; - /* set clock-frequency in board dts */ + devbus_cs2: devbus-cs2 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>; - status = "okay"; - }; + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <6>, <7>, <8>, <9>; + }; - ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <17>; - status = "disabled"; - }; + spi: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; - xor@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - status = "okay"; + i2c: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clocks = <&core_clk 0>; + status = "disabled"; + }; - xor00 { - interrupts = <30>; - dmacap,memcpy; - dmacap,xor; + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <3>; + clocks = <&core_clk 0>; + status = "disabled"; }; - xor01 { - interrupts = <31>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <4>; + clocks = <&core_clk 0>; + status = "disabled"; }; - }; - eth: ethernet-controller@72000 { - compatible = "marvell,orion-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <4>; + }; - ethernet-port@0 { - compatible = "marvell,orion-eth-port"; - reg = <0>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ + intc: interrupt-controller@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x08>; }; - }; - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <22>; - status = "disabled"; + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; - /* add phy nodes in board file */ - }; + wdt: wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + interrupt-parent = <&bridge_intc>; + interrupts = <3>; + status = "okay"; + }; - sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <29>; - status = "disabled"; + ehci0: ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <17>; + status = "disabled"; + }; + + xor: dma-controller@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + status = "okay"; + + xor00 { + interrupts = <30>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <31>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethport: ethernet-port@0 { + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <21>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <22>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + sata: sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + ehci1: ehci@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0xa0000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; }; - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,orion-crypto"; - reg = <0x90000 0x10000>, - <0xf2200000 0x800>; + reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>, + <MBUS_ID(0x09, 0x00) 0x0 0x800>; reg-names = "regs", "sram"; interrupts = <28>; status = "okay"; }; - - ehci@a0000 { - compatible = "marvell,orion-ehci"; - reg = <0xa0000 0x1000>; - interrupts = <12>; - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 8280884bfa59..97a9545f5232 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -22,13 +22,13 @@ compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; + clock-frequency = <800000000>; }; }; gic: interrupt-controller@c2800000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xc2800000 0x1000>, <0xc2000000 0x1000>; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 6e99eb2df076..d01048ab3e77 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -141,12 +141,12 @@ }; sdhi0_pins: sd0 { - renesas,gpios = "sdhi0_data4", "sdhi0_ctrl"; + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; renesas,function = "sdhi0"; }; sdhi2_pins: sd2 { - renesas,gpios = "sdhi2_data4", "sdhi2_ctrl"; + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 618e5b537eaf..10b326bdf831 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -673,7 +673,7 @@ renesas,clock-indices = < R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 - R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY + R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index bdd73e6657b2..de1b6977c69a 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -230,17 +230,17 @@ }; sdhi0_pins: sd0 { - renesas,gpios = "sdhi0_data4", "sdhi0_ctrl"; + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; renesas,function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,gpios = "sdhi1_data4", "sdhi1_ctrl"; + renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; renesas,function = "sdhi1"; }; sdhi2_pins: sd2 { - renesas,gpios = "sdhi2_data4", "sdhi2_ctrl"; + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 46181708e59c..aa1cba94196c 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -688,7 +688,7 @@ renesas,clock-indices = < R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 - R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY + R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 4d4dfbb59f4b..90b354db16a0 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -24,6 +24,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index bb36596ea205..2b494ceef6fc 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -24,6 +24,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; cpu@0 { device_type = "cpu"; @@ -149,7 +150,7 @@ uart0 { uart0_xfer: uart0-xfer { - rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>; }; @@ -164,7 +165,7 @@ uart1 { uart1_xfer: uart1-xfer { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>; }; @@ -179,7 +180,7 @@ uart2 { uart2_xfer: uart2-xfer { - rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>; }; /* no rts / cts for uart2 */ @@ -187,7 +188,7 @@ uart3 { uart3_xfer: uart3-xfer { - rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>, + rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>, <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 59594cf15998..ea92fd69529a 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -19,6 +19,19 @@ reg = <0x30000000 0x4000000>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + xti: xti { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "xti"; + #clock-cells = <0>; + }; + }; + serial@50000000 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index e6555bdd81b8..955e4a4f8c31 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/s3c2443.h> #include "s3c24xx.dtsi" #include "s3c2416-pinctrl.dtsi" @@ -28,26 +29,53 @@ compatible = "samsung,s3c2416-irq"; }; + clocks: clock-controller@0x4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + pinctrl@56000000 { compatible = "samsung,s3c2416-pinctrl"; }; + timer@51000000 { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; + }; + serial@50000000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; }; serial@50004000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; }; serial@50008000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; }; serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, + <&clocks SCLK_UART>; status = "disabled"; }; @@ -55,6 +83,10 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, + <&clocks MUX_HSMMC0>; status = "disabled"; }; @@ -62,18 +94,28 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, + <&clocks MUX_HSMMC1>; status = "disabled"; }; watchdog@53000000 { interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; rtc@57000000 { compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; }; i2c@54000000 { compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index eabcfdbb403a..ceb274f24dbf 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -58,6 +58,18 @@ reg = <0x20000000 0x8000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; @@ -749,18 +761,29 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; #clock-cells = <0>; - clock-frequency = <32768>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; }; - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; #clock-cells = <0>; interrupt-parent = <&pmc>; interrupts = <AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc &main_osc>; }; plla: pllack { @@ -1089,6 +1112,32 @@ status = "disabled"; }; + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + atmel,startup-time-usec = <75>; + }; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + atmel,startup-time-usec = <1200000>; + }; + + clk32k: slowck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index f55ed072c8e6..b0b1331c1974 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -18,6 +18,14 @@ reg = <0x20000000 0x20000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { spi0: spi@f0004000 { diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index b7bd3b9a6753..5ecf552e1c00 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -34,7 +34,6 @@ gic: interrupt-controller@f0001000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xf0001000 0x1000>, <0xf0000100 0x100>; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 3075d2d3a8be..0aa6fef5ce22 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Shiraz Hashim <shiraz.hashim@st.com> + * Copyright 2012 Shiraz Hashim <shiraz.linux.kernel@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index f09fb10a3791..81df870e5ee6 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -49,7 +49,7 @@ reg = <0xfe61f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x5000>; PIO0: gpio@fe610000 { @@ -187,7 +187,7 @@ reg = <0xfee0f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x8000>; PIO5: gpio@fee00000 { @@ -282,7 +282,7 @@ reg = <0xfe82f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x8000>; PIO13: gpio@fe820000 { @@ -423,7 +423,7 @@ reg = <0xfd6bf080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; PIO100: gpio@fd6b0000 { @@ -460,7 +460,7 @@ reg = <0xfd33f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; PIO103: gpio@fd330000 { diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index aeea304086eb..250d5ecc951e 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -53,7 +53,7 @@ reg = <0xfe61f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x6000>; PIO0: gpio@fe610000 { @@ -201,7 +201,7 @@ reg = <0xfee0f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfee00000 0x10000>; PIO5: gpio@fee00000 { @@ -333,7 +333,7 @@ reg = <0xfe82f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe820000 0x6000>; PIO13: gpio@fe820000 { @@ -461,7 +461,7 @@ reg = <0xfd6bf080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd6b0000 0x3000>; PIO100: gpio@fd6b0000 { @@ -498,7 +498,7 @@ reg = <0xfd33f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfd330000 0x5000>; PIO103: gpio@fd330000 { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index cf45a1a39483..6d540a025148 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -233,19 +233,6 @@ status = "disabled"; }; - serial@0,70006400 { - compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; - reg = <0x0 0x70006400 0x0 0x40>; - reg-shift = <2>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_UARTE>; - resets = <&tegra_car 66>; - reset-names = "serial"; - dmas = <&apbdma 20>, <&apbdma 20>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - pwm@0,7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi index c353ef0a6ac7..3537ae5b2146 100644 --- a/arch/arm/boot/dts/twl4030_omap3.dtsi +++ b/arch/arm/boot/dts/twl4030_omap3.dtsi @@ -8,7 +8,7 @@ &twl { pinctrl-names = "default"; - pinctrl-0 = <&twl4030_pins>; + pinctrl-0 = <&twl4030_pins &twl4030_vpins>; }; &omap3_pmx_core { @@ -23,3 +23,20 @@ >; }; }; + +/* + * If your board is not using the I2C4 pins with twl4030, then don't include + * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode + * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and + * sys_nvmode2 signaling. + */ +&omap3_pmx_wkup { + twl4030_vpins: pinmux_twl4030_vpins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */ + OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */ + OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0) /* sys_clkreq.sys_clkreq */ + OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0) /* sys_off_mode.sys_off_mode */ + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 7dd1d6ede525..ded361075aab 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -25,11 +25,13 @@ clocks { audio_ext { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24576000>; }; enet_ext { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <50000000>; }; }; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 804873367669..b8ce0aa7b157 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -45,11 +45,13 @@ sxosc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; fxosc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; @@ -72,8 +74,6 @@ intc: interrupt-controller@40002000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x40003000 0x1000>, <0x40002100 0x100>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 511180769af5..80d8e4f3f626 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -24,6 +24,7 @@ device_type = "cpu"; reg = <0>; clocks = <&clkc 3>; + clock-latency = <1000>; operating-points = < /* kHz uV */ 666667 1000000 @@ -54,6 +55,28 @@ interrupt-parent = <&intc>; ranges; + i2c0: zynq-i2c@e0004000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 38>; + interrupt-parent = <&intc>; + interrupts = <0 25 4>; + reg = <0xe0004000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: zynq-i2c@e0005000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + clocks = <&clkc 39>; + interrupt-parent = <&intc>; + interrupts = <0 48 4>; + reg = <0xe0005000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + intc: interrupt-controller@f8f01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -154,6 +177,11 @@ }; }; + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + } ; + global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; reg = <0xf8f00200 0x20>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index c913f77a21eb..5e09cee33d42 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -34,6 +34,82 @@ phy-mode = "rgmii"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + hwmon@52 { + compatible = "ti,ucd9248"; + reg = <52>; + }; + hwmon@53 { + compatible = "ti,ucd9248"; + reg = <53>; + }; + hwmon@54 { + compatible = "ti,ucd9248"; + reg = <54>; + }; + }; + }; +}; + &sdhci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 88f62c50382e..4cc9913078cd 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -35,6 +35,74 @@ phy-mode = "rgmii"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + i2cswitch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + si570: clock-generator@5d { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x5d>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + ucd90120@65 { + compatible = "ti,ucd90120"; + reg = <0x65>; + }; + }; + }; +}; + &sdhci0 { status = "okay"; }; |