diff options
Diffstat (limited to 'arch/arm/boot')
378 files changed, 15627 insertions, 4252 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 37a3de760d40..b5bd3de87c33 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-ariettag25.dtb \ at91-cosino_mega2560.dtb \ at91-kizboxmini.dtb \ + at91-wb45n.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ at91sam9g35ek.dtb \ @@ -50,7 +51,10 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-sama5d2_ptc_ek.dtb \ at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ + at91-dvk_som60.dtb \ + at91-gatwick.dtb \ at91-tse850-3.dtb \ + at91-wb50n.dtb \ sama5d31ek.dtb \ sama5d33ek.dtb \ sama5d34ek.dtb \ @@ -73,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b-rev2.dtb \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ + bcm2835-rpi-cm1-io1.dtb \ bcm2836-rpi-2-b.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ @@ -200,6 +205,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ gemini-rut1xx.dtb \ + gemini-sl93512r.dtb \ gemini-sq201.dtb \ gemini-wbd111.dtb \ gemini-wbd222.dtb @@ -345,7 +351,8 @@ dtb-$(CONFIG_SOC_IMX27) += \ imx27-phytec-phycore-rdk.dtb \ imx27-phytec-phycard-s-rdk.dtb dtb-$(CONFIG_SOC_IMX31) += \ - imx31-bug.dtb + imx31-bug.dtb \ + imx31-lite.dtb dtb-$(CONFIG_SOC_IMX35) += \ imx35-eukrea-mbimxsd35-baseboard.dtb \ imx35-pdk.dtb @@ -358,10 +365,14 @@ dtb-$(CONFIG_SOC_IMX51) += \ imx51-digi-connectcore-jsk.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ imx51-ts4800.dtb \ - imx51-zii-rdu1.dtb + imx51-zii-rdu1.dtb \ + imx51-zii-scu2-mezz.dtb \ + imx51-zii-scu3-esb.dtb dtb-$(CONFIG_SOC_IMX53) += \ imx53-ard.dtb \ imx53-cx9020.dtb \ + imx53-kp-ddc.dtb \ + imx53-kp-hsc.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \ imx53-ppd.dtb \ @@ -400,6 +411,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-hummingboard2-emmc-som-v15.dtb \ imx6dl-hummingboard2-som-v15.dtb \ imx6dl-icore.dtb \ + imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ imx6dl-mamoj.dtb \ imx6dl-nit6xlite.dtb \ @@ -521,6 +533,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb +dtb-$(CONFIG_SOC_IMX6SLL) += \ + imx6sll-evk.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ @@ -533,6 +547,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-udoo-neo-full.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ + imx6ul-ccimx6ulsbcexpress.dtb \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ @@ -567,8 +582,10 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-cosmic.dtb \ vf610m4-cosmic.dtb \ vf610-twr.dtb \ + vf610-zii-cfu1.dtb \ vf610-zii-dev-rev-b.dtb \ - vf610-zii-dev-rev-c.dtb + vf610-zii-dev-rev-c.dtb \ + vf610-zii-ssmb-spu3.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ @@ -695,10 +712,12 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ am335x-pocketbeagle.dtb \ + am335x-sancloud-bbe.dtb \ am335x-shc.dtb \ am335x-sbc-t335.dtb \ am335x-sl50.dtb \ - am335x-wega-rdk.dtb + am335x-wega-rdk.dtb \ + am335x-osd3358-sm-red.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-droid4-xt894.dtb \ omap4-duovero-parlor.dtb \ @@ -819,6 +838,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a7793-gose.dtb \ r8a7794-alt.dtb \ r8a7794-silk.dtb \ + r9a06g032-rzn1d400-db.dtb \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rv1108-evb.dtb \ @@ -859,6 +879,8 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \ s3c6410-smdk6410.dtb dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-aquila.dtb \ + s5pv210-fascinate4g.dtb \ + s5pv210-galaxys.dtb \ s5pv210-goni.dtb \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ @@ -1039,7 +1061,7 @@ dtb-$(CONFIG_ARCH_TANGO) += \ tango4-vantage-1172.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-harmony.dtb \ - tegra20-iris-512.dtb \ + tegra20-colibri-iris.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ tegra20-plutux.dtb \ @@ -1109,6 +1131,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc770-xm012.dtb \ zynq-zc770-xm013.dtb \ zynq-zed.dtb \ + zynq-zturn.dtb \ zynq-zybo.dtb \ zynq-zybo-z7.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ @@ -1138,6 +1161,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-388-clearfog-pro.dtb \ armada-388-db.dtb \ armada-388-gp.dtb \ + armada-388-helios4.dtb \ armada-388-rd.dtb dtb-$(CONFIG_MACH_ARMADA_39X) += \ armada-398-db.dtb @@ -1168,7 +1192,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt7623a-rfb-emmc.dtb \ mt7623a-rfb-nand.dtb \ mt7623n-rfb-emmc.dtb \ - mt7623n-rfb-nand.dtb \ mt7623n-bananapi-bpi-r2.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index ed7a5a3daa42..8c6fc4161ad7 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -396,7 +396,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio3>; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 1356fd6f8da3..c87d01297a01 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -778,7 +778,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio3>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 0c096a795e37..bf1a40e45c97 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -690,7 +690,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio0>; - interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */ + interrupts = <31 IRQ_TYPE_EDGE_RISING>; /* gpio 31 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts new file mode 100755 index 000000000000..4d969013f99a --- /dev/null +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -0,0 +1,457 @@ +//SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2018 Octavo Systems LLC - http://www.octavosystems.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-osd335x-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +#include <dt-bindings/display/tda998x.h> + +/ { + model = "Octavo Systems OSD3358-SM-RED"; + compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */ + >; + }; + + mcasp0_pins: mcasp0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; + + flash_enable: flash-enable { + pinctrl-single,pins = < + AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */ + >; + }; + + imu_interrupt: imu-interrupt { + pinctrl-single,pins = < + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_rx_er.gpio3_2 */ + >; + }; + + ethernet_interrupt: ethernet-interrupt{ + pinctrl-single,pins = < + AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 */ + >; + }; +}; + +&lcdc { + status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + * AM335x errata for wiring: + * http://www.ti.com/lit/er/sprz360i/sprz360i.pdf + */ + + blue-and-red-wiring = "straight"; + + port { + lcdc_0: endpoint { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&i2c0 { + tda19988: hdmi-encoder@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ + /* video-ports = <0x234501>; */ + + #sound-dai-cells = <0>; + audio-ports = < TDA998x_I2S 0x03>; + + port { + hdmi_0: endpoint { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + + mpu9250: imu@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ax8975@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + }; + }; + /*invensense,int_config = <0x10>; + invensense,level_shifter = <0>; + invensense,orientation = [01 00 00 00 01 00 00 00 01]; + invensense,sec_slave_type = <0>; + invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/ + }; + + bmp280: pressure@78 { + compatible = "bosch,bmp280"; + reg = <0x76>; + }; +}; + +&rtc { + system-power-controller; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +/ { + clk_mcasp0_fixed: clk-mcasp0-fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk-mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "TI BeagleBone Black"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp0>; + clocks = <&clk_mcasp0>; + }; + + simple-audio-card,codec { + sound-dai = <&tda19988>; + }; + }; + + chosen { + stdout-path = &uart0; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led2 { + label = "beaglebone:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led3 { + label = "beaglebone:green:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + user_leds_s0: user-leds-s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + i2c2_pins: pinmux-i2c2-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + uart0_pins: pinmux-uart0-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + clkout2_pin: pinmux-clkout2-pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw-default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw-sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci-mdio-default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci-mdio-sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux-mmc1-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */ + >; + }; + + emmc_pins: pinmux-emmc-pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + interrupts-extended = <&intc 18 &tps 0>; + interrupt-names = "mc", "vbus"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rgmii-txid"; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&rtc { + clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clock-names = "ext-clk", "int-clk"; +}; diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts new file mode 100644 index 000000000000..7b8e7417a11e --- /dev/null +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -0,0 +1,136 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" +#include "am335x-boneblack-common.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "SanCloud BeagleBone Enhanced"; + compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + usb_hub_ctrl: usb_hub_ctrl { + pinctrl-single,pins = < + AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLUP | MUX_MODE7) /* rmii1_refclk.gpio0_29 */ + >; + }; + + mpu6050_pins: pinmux_mpu6050_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE7) /* uart0_ctsn.gpio1_8 */ + >; + }; + + lps3331ap_pins: pinmux_lps3331ap_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + >; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; +}; + +&i2c0 { + lps331ap: barometer@5c { + compatible = "st,lps331ap-press"; + st,drdy-int-pin = <1>; + reg = <0x5c>; + interrupt-parent = <&gpio1>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + }; + + mpu6050: accelerometer@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + orientation = <0xff 0 0 0 1 0 0 0 0xff>; + }; + + usb2512b: usb-hub@2c { + compatible = "microchip,usb2512b"; + reg = <0x2c>; + reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + /* wifi on port 4 */ + }; +}; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 1bcc60424ecd..38d57b89f7d3 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -8,6 +8,8 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Toby Churchill SL50 Series"; @@ -34,25 +36,25 @@ pinctrl-0 = <&led_pins>; led0 { - label = "sl50:green:usr0"; + label = "sl50:red:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; default-state = "off"; }; led1 { - label = "sl50:red:usr1"; + label = "sl50:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; default-state = "off"; }; led2 { - label = "sl50:green:usr2"; + label = "sl50:red:usr2"; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; default-state = "off"; }; led3 { - label = "sl50:red:usr3"; + label = "sl50:green:usr3"; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; default-state = "off"; }; @@ -60,16 +62,44 @@ backlight0: disp0 { compatible = "pwm-backlight"; - pwms = <&ehrpwm1 0 500000 0>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; - default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&backlight0_pins>; + pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_sys_reg>; }; backlight1: disp1 { compatible = "pwm-backlight"; - pwms = <&ehrpwm1 1 500000 0>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; - default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&backlight1_pins>; + pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>; + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_sys_reg>; }; clocks { @@ -78,27 +108,85 @@ #size-cells = <0>; /* audio external oscillator */ - tlv320aic3x_mclk: oscillator@0 { + audio_mclk_fixed: oscillator@0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; /* 24.576MHz */ }; + + audio_mclk: audio_mclk_gate@0 { + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&audio_mclk_pins>; + clocks = <&audio_mclk_fixed>; + enable-gpios = <&gpio1 27 0>; + }; + }; + + panel: lcd_panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + tft-alt-mode = <0>; + mono-8bit-mode = <0>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + native-mode = <&timing0>; + timing0: 960x128 { + clock-frequency = <18000000>; + hactive = <960>; + vactive = <272>; + + hback-porch = <40>; + hfront-porch = <16>; + hsync-len = <24>; + hsync-active = <0>; + + vback-porch = <3>; + vfront-porch = <8>; + vsync-len = <4>; + vsync-active = <0>; + }; + }; }; sound { - compatible = "ti,da830-evm-audio"; - ti,model = "AM335x-SL50"; - ti,audio-codec = <&audio_codec>; - ti,mcasp-controller = <&mcasp0>; + compatible = "audio-graph-card"; + label = "sound-card"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_pa_pins>; + + widgets = "Headphone", "Headphone Jack", + "Speaker", "Speaker External", + "Line", "Line In", + "Microphone", "Microphone Jack"; - clocks = <&tlv320aic3x_mclk>; - clock-names = "mclk"; + routing = "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Amplifier", "MONO_LOUT", + "Speaker External", "Amplifier", + "LINE1R", "Line In", + "LINE1L", "Line In", + "MIC3L", "Microphone Jack", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; - ti,audio-routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "LINE1R", "Line In", - "LINE1L", "Line In"; + dais = <&cpu_port>; + + pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; }; emmc_pwrseq: pwrseq@0 { @@ -108,6 +196,14 @@ reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; }; + vdd_sys_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_sys_reg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; @@ -120,6 +216,65 @@ pinctrl-names = "default"; pinctrl-0 = <&lwb_pins>; + audio_pins: pinmux_audio_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ + AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + >; + }; + + audio_pa_pins: pinmux_audio_pa_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */ + >; + }; + + audio_mclk_pins: pinmux_audio_mclk_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + >; + }; + + backlight0_pins: pinmux_backlight0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ + >; + }; + + backlight1_pins: pinmux_backlight1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* gpmc_ad10.gpio0_26 */ + >; + }; + + lcd_pins: pinmux_lcd_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + led_pins: pinmux_led_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ @@ -207,6 +362,8 @@ /* MDIO */ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + /* Ethernet */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */ >; }; @@ -245,20 +402,16 @@ >; }; - audio_pins: pinmux_audio_pins { + ehrpwm1_pins: pinmux_ehrpwm1a_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ - AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ - AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ - AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ - AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */ >; }; - ehrpwm1_pins: pinmux_ehrpwm1a_pins { + rtc0_irq_pins: pinmux_rtc0_irq_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ - AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */ + AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad9.gpio0_23 */ >; }; @@ -274,15 +427,18 @@ lwb_pins: pinmux_lwb_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */ - AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* nKbdOnC - gpmc_ad10.gpio0_26 */ AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */ AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ - AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ /* PDI Bus - Battery system */ AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ + /* FPGA */ + AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */ + AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */ + AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */ + AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */ >; }; }; @@ -298,9 +454,14 @@ reg = <0x24>; }; - bq32000: rtc@68 { - compatible = "ti,bq32000"; - trickle-resistor-ohms = <1120>; + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + pinctrl-names = "default"; + pinctrl-0 = <&rtc0_irq_pins>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */ + wakeup-source; + trickle-resistor-ohms = <2000>; reg = <0x68>; }; @@ -326,12 +487,21 @@ audio_codec: tlv320aic3106@1b { status = "okay"; compatible = "ti,tlv320aic3106"; + #sound-dai-cells = <0>; reg = <0x1b>; + ai3x-micbias-vg = <2>; /* 2.5V */ AVDD-supply = <&ldo4_reg>; IOVDD-supply = <&ldo4_reg>; DRVDD-supply = <&ldo4_reg>; DVDD-supply = <&ldo3_reg>; + + codec_port: port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + clocks = <&audio_mclk>; + }; + }; }; /* Ambient Light Sensor */ @@ -363,7 +533,7 @@ &usb0 { status = "okay"; - dr_mode = "peripheral"; + dr_mode = "otg"; }; &usb1 { @@ -397,17 +567,27 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&audio_pins>; - + #sound-dai-cells = <0>; op-mode = <0>; /* MCASP_ISS_MODE */ tdm-slots = <2>; - serial-dir = < - 2 0 1 0 - 0 0 0 0 - 0 0 0 0 - 0 0 0 0 + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 >; - tx-num-evt = <1>; - rx-num-evt = <1>; + tx-num-evt = <32>; + rx-num-evt = <32>; + + cpu_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "dsp_b"; + bitclock-master = <&codec_port>; + frame-master = <&codec_port>; + bitclock-inversion; + clocks = <&audio_mclk>; + }; + }; }; &uart0 { @@ -507,13 +687,8 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; - phy-mode = "mii"; -}; - -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; phy-mode = "mii"; + phy-handle = <ðphy0>; }; &mac { @@ -528,6 +703,12 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + reset-delay-us = <100>; /* PHY datasheet states 100us min */ + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &sham { @@ -547,3 +728,15 @@ pinctrl-names = "default"; pinctrl-0 = <&ehrpwm1_pins>; }; + +&lcdc { + status = "okay"; +}; + +&tscadc { + status = "okay"; +}; + +&am335x_adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 9cd62bc2ca35..d3dd6a16e70a 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -29,8 +29,8 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - d_can0 = &dcan0; - d_can1 = &dcan1; + d-can0 = &dcan0; + d-can1 = &dcan1; usb0 = &usb0; usb1 = &usb1; phy0 = &usb0_phy; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 98aadb0f81c5..1d158cfda15f 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -127,6 +127,7 @@ status = "okay"; pinctrl-names = "default"; enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */ + vcc-supply = <&vdd_io_reg>; port { lcd_in: endpoint { @@ -154,6 +155,7 @@ bl: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; + power-supply = <&vdd_io_reg>; pinctrl-0 = <&backlight_pins>; pwms = <&pwm11 0 5000000 0>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; @@ -168,6 +170,13 @@ ti,timers = <&timer11>; #pwm-cells = <3>; }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ + #phy-cells = <0>; + }; }; &davinci_emac { @@ -203,6 +212,7 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; }; }; @@ -220,15 +230,21 @@ cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */ }; -&mmc2 { +&mmc3 { status = "disabled"; }; -&mmc3 { - status = "disabled"; +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; }; &omap3_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -287,4 +303,32 @@ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ >; }; + + hsusb1_rst_pins: pinmux_hsusb1_rst_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; + + hsusb1_pins: pinmux_hsusb1_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ + OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ + OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ + OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ + OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ + OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ + OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ + OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ + OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ + OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ + OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ + >; + }; }; diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index a6d5ff73c163..dae6e458e59f 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -14,6 +14,32 @@ cpu0-supply = <&vdd_core_reg>; }; }; + + wl12xx_buffer: wl12xx_buf { + compatible = "regulator-fixed"; + regulator-name = "wl1271_buf"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_buffer_pins>; + gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */ + regulator-always-on; + vin-supply = <&vdd_1v8_reg>; + }; + + wl12xx_vmmc2: wl12xx_vmmc2 { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_wkup_pins>; + gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */ + startup-delay-us = <70000>; + enable-active-high; + regulator-always-on; + vin-supply = <&wl12xx_buffer>; + }; }; &gpmc { @@ -64,7 +90,6 @@ regulators { vdd_core_reg: VDCDC1 { regulator-name = "vdd_core"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -72,7 +97,6 @@ vdd_io_reg: VDCDC2 { regulator-name = "vdd_io"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -80,7 +104,6 @@ vdd_1v8_reg: VDCDC3 { regulator-name = "vdd_1v8"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -88,7 +111,6 @@ vdd_usb18_reg: LDO1 { regulator-name = "vdd_usb18"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -96,7 +118,6 @@ vdd_usb33_reg: LDO2 { regulator-name = "vdd_usb33"; - compatible = "regulator-fixed"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -126,8 +147,63 @@ }; }; +&mmc2 { + interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>; + + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&wl12xx_vmmc2>; + non-removable; + bus-width = <4>; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */ + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + bluetooth { + compatible = "ti,wl1271-st"; + enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */ + max-speed = <3000000>; + }; +}; + &omap3_pmx_core { + wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_clk.mmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_cmd.mmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat0.mmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat1.mmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat2.mmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat3.mmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */ + OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + rtc_pins: pinmux_rtc_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */ @@ -139,4 +215,23 @@ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */ >; }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0) /* uart2_rts */ + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ + OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0) /* gpio_56 */ + >; + }; +}; + +&omap3_pmx_wkup { + + wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ + >; + }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 60414b1ca404..5b97c20c5ed4 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -790,7 +790,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; }; }; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 5bb9d68d6e90..d9a2049a1ea8 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -66,10 +66,6 @@ }; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &extcon_usb2 { id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi index c6d858b31011..784639ddf451 100644 --- a/arch/arm/boot/dts/am572x-idk-common.dtsi +++ b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -57,10 +57,6 @@ }; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &extcon_usb2 { id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index ad87f1ae904d..c9063ffca524 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -395,8 +395,13 @@ dr_mode = "host"; }; +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb2 { - dr_mode = "peripheral"; + extcon = <&extcon_usb2>; + dr_mode = "otg"; }; &mmc1 { diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts index 50ed4ae5c621..53b4bd35522a 100644 --- a/arch/arm/boot/dts/armada-388-clearfog-base.dts +++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts index 24e4b5a509be..ff890c09c3ed 100644 --- a/arch/arm/boot/dts/armada-388-clearfog-pro.dts +++ b/arch/arm/boot/dts/armada-388-clearfog-pro.dts @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ #include "armada-388-clearfog.dts" diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 5fd0f6f61e77..89a354b43978 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ /dts-v1/; @@ -235,7 +230,7 @@ &spi1 { /* * Add SPI CS pins for clearfog: - * CS0: W25Q32 (not populated on uSOM) + * CS0: W25Q32 * CS1: * CS2: mikrobus */ diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index 0d9dfdfe977e..7c6ad2afb094 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -3,11 +3,6 @@ * Device Tree include file for SolidRun Clearfog 88F6828 based boards * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ #include "armada-388.dtsi" @@ -230,7 +225,7 @@ &spi1 { /* * Add SPI CS pins for clearfog: - * CS0: W25Q32 (not populated on uSOM) + * CS0: W25Q32 * CS1: PIC microcontroller (Pro models) * CS2: mikrobus */ diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts new file mode 100644 index 000000000000..705adfa8c680 --- /dev/null +++ b/arch/arm/boot/dts/armada-388-helios4.dts @@ -0,0 +1,313 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Helios4 + * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828) + * + * Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io> + * + */ + +/dts-v1/; +#include "armada-388.dtsi" +#include "armada-38x-solidrun-microsom.dtsi" + +/ { + model = "Helios4"; + compatible = "kobol,helios4", "marvell,armada388", + "marvell,armada385", "marvell,armada380"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + aliases { + /* So that mvebu u-boot can update the MAC addresses */ + ethernet1 = ð0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_12v: regulator-12v { + compatible = "regulator-fixed"; + regulator-name = "power_brick_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_12v>; + }; + + reg_5p0v_hdd: regulator-5v-hdd { + compatible = "regulator-fixed"; + regulator-name = "5V_HDD"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_12v>; + }; + + reg_5p0v_usb: regulator-5v-usb { + compatible = "regulator-fixed"; + regulator-name = "USB-PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&expander0 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_12v>; + }; + + system-leds { + compatible = "gpio-leds"; + status-led { + label = "helios4:green:status"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + + fault-led { + label = "helios4:red:fault"; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + + io-leds { + compatible = "gpio-leds"; + sata1-led { + label = "helios4:green:ata1"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata1"; + default-state = "off"; + }; + sata2-led { + label = "helios4:green:ata2"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata2"; + default-state = "off"; + }; + sata3-led { + label = "helios4:green:ata3"; + gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata3"; + default-state = "off"; + }; + sata4-led { + label = "helios4:green:ata4"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ata4"; + default-state = "off"; + }; + usb-led { + label = "helios4:green:usb"; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usb-host"; + default-state = "off"; + }; + }; + + fan1: j10-pwm { + compatible = "pwm-fan"; + pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */ + }; + + fan2: j17-pwm { + compatible = "pwm-fan"; + pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */ + }; + + usb2_phy: usb2-phy { + compatible = "usb-nop-xceiv"; + vbus-regulator = <®_5p0v_usb>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + }; + + soc { + internal-regs { + i2c@11000 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* + * PCA9655 GPIO expander, up to 1MHz clock. + * 0-Board Revision bit 0 # + * 1-Board Revision bit 1 # + * 5-USB3 overcurrent + * 6-USB3 power + */ + expander0: gpio-expander@20 { + /* + * This is how it should be: + * compatible = "onnn,pca9655", + * "nxp,pca9555"; + * but you can't do this because of + * the way I2C works. + */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pca0_pins>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + board_rev_bit_0 { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "board-rev-0"; + }; + board_rev_bit_1 { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + input; + line-name = "board-rev-1"; + }; + usb3_ilimit { + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + input; + line-name = "usb-overcurrent-status"; + }; + }; + + temp_sensor: temp@4c { + compatible = "ti,lm75"; + reg = <0x4c>; + vcc-supply = <®_3p3v>; + }; + }; + + i2c@11100 { + /* + * External I2C Bus for user peripheral + */ + clock-frequency = <400000>; + pinctrl-0 = <&helios_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + sata@a8000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + }; + + sata1: sata-port@1 { + reg = <1>; + }; + }; + + sata@e0000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata2: sata-port@0 { + reg = <0>; + }; + + sata3: sata-port@1 { + reg = <1>; + }; + }; + + spi@10680 { + pinctrl-0 = <&spi1_pins + µsom_spi1_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + sdhci@d8000 { + bus-width = <4>; + cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + no-1-8-v; + pinctrl-0 = <&helios_sdhci_pins + &helios_sdhci_cd_pins>; + pinctrl-names = "default"; + status = "okay"; + vmmc = <®_3p3v>; + wp-inverted; + }; + + usb@58000 { + usb-phy = <&usb2_phy>; + status = "okay"; + }; + + usb3@f0000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + }; + + pinctrl@18000 { + pca0_pins: pca0-pins { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + microsom_phy0_int_pins: microsom-phy0-int-pins { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + helios_i2c1_pins: i2c1-pins { + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c1"; + }; + helios_sdhci_cd_pins: helios-sdhci-cd-pins { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + helios_sdhci_pins: helios-sdhci-pins { + marvell,pins = "mpp21", "mpp28", + "mpp37", "mpp38", + "mpp39", "mpp40"; + marvell,function = "sd0"; + }; + helios_led_pins: helios-led-pins { + marvell,pins = "mpp24", "mpp25", + "mpp49", "mpp50", + "mpp52", "mpp53", + "mpp54"; + marvell,function = "gpio"; + }; + helios_fan_pins: helios-fan-pins { + marvell,pins = "mpp41", "mpp43", + "mpp48", "mpp55"; + marvell,function = "gpio"; + }; + microsom_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp59"; + marvell,function = "spi1"; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 2d1cea131e71..3a7f9c1ac346 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -3,11 +3,6 @@ * Device Tree file for SolidRun Armada 38x Microsom * * Copyright (C) 2015 Russell King - * - * This board is in development; the contents of this file work with - * the A1 rev 2.0 of the board, which does not represent final - * production board. Things will change, don't expect this file to - * remain compatible info the future. */ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -99,7 +94,6 @@ compatible = "w25q32", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <3000000>; - status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index ede11c597673..2375449c02d0 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -80,20 +80,20 @@ }; }; -&ehci0 { +/* + * Enable port A as device (via the virtual hub) and port B as + * host by default on the eval board. This can be easily changed + * by replacing the override below with &ehci0 { ... } to enable + * host on both ports. + */ +&vhub { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2ah_default>; }; &ehci1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2bh_default>; }; &uhci { status = "okay"; - - /* No pinctrl, this follows the above EHCI settings */ }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 0b9b37d4d6ef..7d28c03a9e0b 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -21,9 +21,9 @@ #size-cells = <1>; ranges; - vga_memory: framebuffer@bf000000 { + vga_memory: framebuffer@9f000000 { no-map; - reg = <0xbf000000 0x01000000>; /* 16M */ + reg = <0x9f000000 0x01000000>; /* 16M */ }; flash_memory: region@98000000 { diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 75df1573380e..b23a983f95a5 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -92,6 +92,12 @@ reg = <0x1e6c0080 0x80>; }; + cvic: copro-interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2400-cvic", "aspeed-cvic"; + valid-sources = <0x7fffffff>; + reg = <0x1e6c2000 0x80>; + }; + mac0: ethernet@1e660000 { compatible = "aspeed,ast2400-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; @@ -113,6 +119,8 @@ reg = <0x1e6a1000 0x100>; interrupts = <5>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2h_default>; status = "disabled"; }; @@ -123,6 +131,20 @@ #ports = <3>; clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; status = "disabled"; + /* + * No default pinmux, it will follow EHCI, use an explicit pinmux + * override if you don't enable EHCI + */ + }; + + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2400-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2d_default>; + status = "disabled"; }; apb { @@ -161,7 +183,7 @@ status = "disabled"; }; - sram@1e720000 { + sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x8000>; // 32K }; @@ -224,7 +246,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x1e786000 0x1000>; - clocks = <&syscon ASPEED_CLK_APB>; + clocks = <&syscon ASPEED_CLK_24M>; resets = <&syscon ASPEED_RESET_PWM>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 17f2714d18a7..87fdc146ff52 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -127,6 +127,13 @@ reg = <0x1e6c0080 0x80>; }; + cvic: copro-interrupt-controller@1e6c2000 { + compatible = "aspeed,ast2500-cvic", "aspeed-cvic"; + valid-sources = <0xffffffff>; + copro-sw-interrupts = <1>; + reg = <0x1e6c2000 0x80>; + }; + mac0: ethernet@1e660000 { compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; @@ -148,6 +155,8 @@ reg = <0x1e6a1000 0x100>; interrupts = <5>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ah_default>; status = "disabled"; }; @@ -156,6 +165,8 @@ reg = <0x1e6a3000 0x100>; interrupts = <13>; clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bh_default>; status = "disabled"; }; @@ -166,6 +177,20 @@ #ports = <2>; clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; status = "disabled"; + /* + * No default pinmux, it will follow EHCI, use an explicit pinmux + * override if you don't enable EHCI + */ + }; + + vhub: usb-vhub@1e6a0000 { + compatible = "aspeed,ast2500-usb-vhub"; + reg = <0x1e6a0000 0x300>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ad_default>; + status = "disabled"; }; apb { @@ -211,7 +236,7 @@ status = "disabled"; }; - sram@1e720000 { + sram: sram@1e720000 { compatible = "mmio-sram"; reg = <0x1e720000 0x9000>; // 36K }; @@ -281,7 +306,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x1e786000 0x1000>; - clocks = <&syscon ASPEED_CLK_APB>; + clocks = <&syscon ASPEED_CLK_24M>; resets = <&syscon ASPEED_RESET_PWM>; status = "disabled"; }; @@ -1417,6 +1442,11 @@ groups = "USB2AH"; }; + pinctrl_usb2ad_default: usb2ad_default { + function = "USB2AD"; + groups = "USB2AD"; + }; + pinctrl_usb11bhid_default: usb11bhid_default { function = "USB11BHID"; groups = "USB11BHID"; diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/at91-dvk_som60.dts new file mode 100644 index 000000000000..ededd5b0d27b --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_som60.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ +/dts-v1/; +#include "at91-som60.dtsi" +#include "at91-dvk_su60_somc.dtsi" +#include "at91-dvk_su60_somc_lcm.dtsi" + +/ { + model = "Laird DVK SOM60"; + compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = &dbgu; + tick-timer = &pit; + }; +}; + +&mmc0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&ssc0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&pit { + status = "okay"; +}; + +&adc0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&macb0 { + status = "okay"; +}; + +&macb1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi new file mode 100644 index 000000000000..bb86f17ed5ed --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ + +/ { + sound { + compatible = "atmel,asoc-wm8904"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck2_as_audio_mck>; + + atmel,model = "wm8904 @ DVK-SOM60"; + atmel,audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Mic", "MICBIAS", + "IN1L", "Mic"; + + atmel,ssc-controller = <&ssc0>; + atmel,audio-codec = <&wm8904>; + + status = "okay"; + }; +}; + +&mmc0 { + status = "okay"; + + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + slot@0 { + bus-width = <4>; + cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; + cd-inverted; + }; +}; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */ + spi-flash@0 { + compatible = "mxicy,mx25u4035", "jedec,spi-nor"; + spi-max-frequency = <33000000>; + reg = <0>; + }; +}; + +&ssc0 { + atmel,clk-from-rk-pin; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + wm8904: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck2>; + clock-names = "mclk"; + }; +}; + +&i2c1 { + status = "okay"; + + eeprom@87 { + compatible = "giantec,gt24c32a", "atmel,24c32"; + reg = <87>; + pagesize = <32>; + }; +}; + +&usart1 { + status = "okay"; +}; + +&usart2 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&pit { + status = "okay"; +}; + +&adc0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&macb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@7 { + reg = <7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_geth_int>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; +}; + +&macb1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@1 { + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth_int>; + interrupt-parent = <&pioC>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi new file mode 100644 index 000000000000..4b9176dc5d02 --- /dev/null +++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + panel: panel { + compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel"; + backlight = <&backlight>; + power-supply = <&vcc_lcd_reg>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + vcc_lcd_reg: fixedregulator_lcd { + compatible = "regulator-fixed"; + regulator-name = "VCC LCM"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + status = "okay"; + }; +}; + +&pinctrl { + board { + pinctrl_lcd_ctp_int: lcd_ctp_int { + atmel,pins = + <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + ft5426@56 { + compatible = "focaltech,ft5426", "edt,edt-ft5406"; + reg = <56>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_ctp_int>; + + interrupt-parent = <&pioC>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&hlcdc { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts new file mode 100644 index 000000000000..5a81cab5fc3a --- /dev/null +++ b/arch/arm/boot/dts/at91-gatwick.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-gatwick.dts - Device Tree file for the Gatwick board + * + * Copyright (C) 2018 Laird + * + */ +/dts-v1/; +#include "at91-wb50n.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Laird Workgroup Bridge 50N - Project Gatwick"; + compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + gpio_keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio>; + + reset-button { + label = "Reset Button"; + linux,code = <KEY_SETUP>; + gpios = <&pioE 31 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + ethernet { + label = "gatwick:yellow:ethernet"; + gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wifi { + label = "gatwick:green:wifi"; + gpios = <&pioA 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + ble { + label = "gatwick:blue:ble"; + gpios = <&pioA 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lora { + label = "gatwick:orange:lora"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blank { + label = "gatwick:green:blank"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + user { + label = "gatwick:yellow:user"; + gpios = <&pioA 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&pinctrl { + board { + pinctrl_key_gpio: key_gpio_0 { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */ + }; + }; +}; + +&mmc0 { + status = "okay"; +}; + +&macb1 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +/* FTDI USART */ +&usart0 { + status = "okay"; +}; + +/* GPS USART */ +&usart1 { + pinctrl-0 = <&pinctrl_usart1>; + status = "okay"; +}; + +&spi1 { + status = "okay"; + + spidev@0 { + compatible = "semtech,sx1301"; + reg = <0>; + spi-max-frequency = <8000000>; + }; +}; + +&usb1 { + status = "okay"; + /delete-property/atmel,oc-gpio; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi new file mode 100644 index 000000000000..241682a207c5 --- /dev/null +++ b/arch/arm/boot/dts/at91-som60.dtsi @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-som60.dtsi - Device Tree file for the SOM60 module + * + * Copyright (C) 2018 Laird, + * 2018 Ben Whitten <ben.whitten@lairdtech.com> + * + */ +#include "sama5d36.dtsi" + +/ { + model = "Laird SOM60"; + compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + chosen { + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; +}; + +&pinctrl { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_en: mmc0_en { + atmel,pins = + <AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_nand0_wp: nand0_wp { + atmel,pins = + <AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_usb_vbus: usb_vbus { + atmel,pins = + <AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + /* Conflicts with USART2_SCK */ + }; + + pinctrl_usart2_sck: usart2_sck { + atmel,pins = + <AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; + /* Conflicts with USB_VBUS */ + }; + + pinctrl_usb_oc: usb_oc { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + /* Conflicts with USART3_SCK */ + }; + + pinctrl_usart3_sck: usart3_sck { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + /* Conflicts with USB_OC */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_geth_int: geth_int { + atmel,pins = + <AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + /* Conflicts with USART1_SCK */ + }; + + pinctrl_usart1_sck: usart1_sck { + atmel,pins = + <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; + /* Conflicts with GETH_INT */ + }; + + pinctrl_eth_int: eth_int { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_pck2_as_audio_mck: pck2_as_audio_mck { + atmel,pins = + <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; +}; + +&mmc0 { + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc1 { + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&spi0 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; +}; + +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>; +}; + +&usart1 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; +}; + +&usart2 { + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>; +}; + +&usart3 { + pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>; +}; + +&adc0 { + pinctrl-0 = < + &pinctrl_adc0_adtrg + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + >; +}; + +&macb0 { + phy-mode = "rgmii"; +}; + +&macb1 { + phy-mode = "rmii"; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand: nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ubootspl@0 { + label = "u-boot-spl"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x20000>; + }; + + ubi@e0000 { + label = "ubi"; + reg = <0xe0000 0xfe00000>; + }; + }; + }; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>; + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 20 GPIO_ACTIVE_HIGH + 0>; + atmel,oc-gpio = <0 + &pioE 15 GPIO_ACTIVE_LOW + 0>; +}; diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts new file mode 100644 index 000000000000..5b9512a6c89c --- /dev/null +++ b/arch/arm/boot/dts/at91-wb45n.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb45n.dts - Device Tree file for WB45NBT board + * + * Copyright (C) 2018 Laird + * + */ +/dts-v1/; +#include "at91-wb45n.dtsi" + +/ { + model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)"; + compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9"; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + irqbtn@18 { + reg = <18>; + label = "IRQBTN"; + linux,code = <99>; + gpios = <&pioB 18 GPIO_ACTIVE_LOW>; + gpio-key,wakeup = <1>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&mmc0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&macb0 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +&usart0 { + status = "okay"; +}; + +&usart3 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi new file mode 100644 index 000000000000..ebe61a25ca96 --- /dev/null +++ b/arch/arm/boot/dts/at91-wb45n.dtsi @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb45n.dtsi - Device Tree file for WB45NBT board + * + * Copyright (C) 2018 Laird + * + */ + +#include "at91sam9g25.dtsi" + +/ { + model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)"; + compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + atheros { + compatible = "atheros,ath6kl"; + atheros,board-id = "SD32"; + }; +}; + +&reset_controller { + compatible = "atmel,sama5d3-rstc"; +}; + +&shutdown_controller { + atmel,wakeup-mode = "low"; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&ebi { + status = "okay"; + nand_controller: nand-controller { + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>; + pinctrl-names = "default"; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bs"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "redund-env"; + reg = <0xc0000 0x20000>; + }; + + kernel-a@e0000 { + label = "kernel-a"; + reg = <0xe0000 0x280000>; + }; + + kernel-b@360000 { + label = "kernel-b"; + reg = <0x360000 0x280000>; + }; + + rootfs-a@5e0000 { + label = "rootfs-a"; + reg = <0x5e0000 0x2600000>; + }; + + rootfs-b@2be0000 { + label = "rootfs-b"; + reg = <0x2be0000 0x2600000>; + }; + + user@51e0000 { + label = "user"; + reg = <0x51e0000 0x2dc0000>; + }; + + logs@7fa0000 { + label = "logs"; + reg = <0x7fa0000 0x60000>; + }; + + }; + }; + }; +}; + +&usb0 { + num-ports = <2>; + atmel,vbus-gpio = < + &pioB 12 GPIO_ACTIVE_HIGH + &pioA 31 GPIO_ACTIVE_HIGH + >; + atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; +}; + +&macb0 { + phy-mode = "rmii"; +}; + +&spi0 { + cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>; +}; + +&usb2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_usb2>; + atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>; +}; + +&mmc0 { + pinctrl-0 = < + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&pinctrl { + usb2 { + pinctrl_board_usb2: usb2-board { + atmel,pins = + <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB11 gpio vbus sense, deglitch */ + }; + }; +}; + diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts new file mode 100644 index 000000000000..8cecc7051a86 --- /dev/null +++ b/arch/arm/boot/dts/at91-wb50n.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb50n.dts - Device Tree file for wb50n evaluation board + * + * Copyright (C) 2018 Laird + * + */ + +/dts-v1/; +#include "at91-wb50n.dtsi" + +/ { + model = "Laird Workgroup Bridge 50N - Atmel SAMA5D"; + compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + btn0@10 { + reg = <10>; + label = "BTNESC"; + linux,code = <1>; /* ESC button */ + gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + gpio-key,wakeup = <1>; + }; + + irqbtn@31 { + reg = <31>; + label = "IRQBTN"; + linux,code = <99>; /* SysReq button */ + gpios = <&pioE 31 GPIO_ACTIVE_LOW>; + gpio-key,wakeup = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "wb50n:blue:led0"; + gpios = <&pioA 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led1 { + label = "wb50n:green:led1"; + gpios = <&pioA 24 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + label = "wb50n:red:led2"; + gpios = <&pioA 26 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + +&mmc0 { + status = "okay"; +}; + +&macb1 { + status = "okay"; +}; + +&dbgu { + status = "okay"; +}; + +/* On BB40 this port is labeled UART1 */ +&usart0 { + status = "okay"; +}; + +/* On BB40 this port is labeled UART0 */ +&usart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; + + spidev@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <8000000>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi new file mode 100644 index 000000000000..85692c8ef2b1 --- /dev/null +++ b/arch/arm/boot/dts/at91-wb50n.dtsi @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module + * + * Copyright (C) 2018 Laird + * + */ + +#include "sama5d31.dtsi" + +/ { + model = "Laird Workgroup Bridge 50N - Atmel SAMA5D"; + compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; +}; + +&pinctrl { + board { + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */ + }; + + pinctrl_usba_vbus: usba_vbus { + atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */ + }; + }; +}; + +&slow_xtal { + clock-frequency = <32768>; +}; + +&main_xtal { + clock-frequency = <12000000>; +}; + +&slow_osc { + atmel,osc-bypass; +}; + +&usart1_clk { + atmel,clk-output-range = <0 132000000>; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; + cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>; + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + status = "okay"; + atheros@0 { + compatible = "atheros,ath6kl"; + atheros,board-id = "SD32"; + reg = <0>; + bus-width = <4>; + }; +}; + +&macb1 { + phy-mode = "rmii"; +}; + +&dbgu { + dmas = <0>, <0>; /* Do not use DMA for dbgu */ +}; + +/* On BB40 this port is labeled UART1 */ +&usart0 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>; +}; + +/* On BB40 this port is labeled UART0 */ +&usart1 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; + dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>; + dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>; + dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>; + rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>; +}; + +/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */ +&usart3 { + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>; + status = "okay"; +}; + +&spi1 { + cs-gpios = <&pioC 25 0>, <0>, <0>, <0>; +}; + +&ebi { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand: nand@3 { + reg = <0x3 0x0 0x2>; + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bs"; + reg = <0x0 0x20000>; + }; + + uboot@20000 { + label = "u-boot"; + reg = <0x20000 0x80000>; + }; + + ubootenv@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x20000>; + }; + + ubootenv@c0000 { + label = "u-boot-env"; + reg = <0xc0000 0x20000>; + }; + + kernel-a@e0000 { + label = "kernel-a"; + reg = <0xe0000 0x500000>; + }; + + kernel-b@5e0000 { + label = "kernel-b"; + reg = <0x5e0000 0x500000>; + }; + + rootfs-a@ae0000 { + label = "rootfs-a"; + reg = <0xae0000 0x3000000>; + }; + + rootfs-b@3ae0000 { + label = "rootfs-b"; + reg = <0x3ae0000 0x3000000>; + }; + + user@6ae0000 { + label = "user"; + reg = <0x6ae0000 0x14e0000>; + }; + }; + }; +}; + +&usb0 { + atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; +}; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>; + atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 53c63d0a418a..33f09d5ea020 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -590,7 +590,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc", "syscon"; + compatible = "atmel,at91sam9261-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 87fb0660ab5d..af68a86c9973 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -93,7 +93,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc", "syscon"; + compatible = "atmel,at91sam9263-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index bd001cca25a4..8fb22030f00b 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -832,7 +832,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9g45-pmc", "syscon"; + compatible = "atmel,at91sam9rl-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index a3c3c3128148..11c0ef102ab1 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -389,13 +389,13 @@ }; }; - rstc@fffffe00 { + reset_controller: rstc@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; }; - shdwc@fffffe10 { + shutdown_controller: shdwc@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; clocks = <&clk32k>; @@ -470,7 +470,7 @@ clock-names = "dma_clk"; }; - pinctrl@fffff400 { + pinctrl: pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; @@ -1206,7 +1206,7 @@ }; }; - watchdog@fffffe40 { + watchdog: watchdog@fffffe40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 2c4df2d2d4a6..253df7170a4e 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -41,6 +41,10 @@ model = "Broadcom Cygnus SoC"; interrupt-parent = <&gic>; + aliases { + ethernet0 = ð0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -417,6 +421,11 @@ status = "disabled"; }; + rng: rng@18032000 { + compatible = "brcm,iproc-rng200"; + reg = <0x18032000 0x28>; + }; + sdhci0: sdhci@18041000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x18041000 0x100>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts new file mode 100644 index 000000000000..4764a25585ab --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835-rpi-cm1.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,compute-module", "brcm,bcm2835"; + model = "Raspberry Pi Compute Module IO board rev1"; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "GPIO0", + "GPIO1", + "GPIO2", + "GPIO3", + "GPIO4", + "GPIO5", + "GPIO6", + "GPIO7", + "GPIO8", + "GPIO9", + "GPIO10", + "GPIO11", + "GPIO12", + "GPIO13", + "GPIO14", + "GPIO15", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "GPIO32", + "GPIO33", + "GPIO34", + "GPIO35", + "GPIO36", + "GPIO37", + "GPIO38", + "GPIO39", + "GPIO40", + "GPIO41", + "GPIO42", + "GPIO43", + "GPIO44", + "GPIO45", + "HDMI_HPD_N", + /* Also used as ACT LED */ + "EMMC_EN_N", + /* Used by eMMC */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi new file mode 100644 index 000000000000..ef22c2da783a --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + leds { + act { + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + }; + + reg_3v3: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&sdhost { + non-removable; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_1v8>; +}; diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index 7704bb029605..beb6c502dadc 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -17,6 +17,12 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupt-parent = <&local_intc>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + }; + timer { compatible = "arm,armv7-timer"; interrupt-parent = <&local_intc>; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 61315cf734ef..31b29646b14c 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -66,6 +66,12 @@ clock-frequency = <1000000>; }; + txp@7e004000 { + compatible = "brcm,bcm2835-txp"; + reg = <0x7e004000 0x20>; + interrupts = <1 11>; + }; + dma: dma@7e007000 { compatible = "brcm,bcm2835-dma"; reg = <0x7e007000 0xf00>; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index ff2e551b9058..79d454ff3be4 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -90,3 +90,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 3bcc03788f38..99365bb8c41e 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -80,3 +80,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index a587384f8e40..bc330b1f6de0 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -146,3 +146,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts index 6c8f0ad82332..258d2b251900 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -38,3 +38,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index ebda45fe9ea4..e7fdaed99bd0 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -57,3 +57,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 9dd0e22c906a..42bafc644013 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -64,3 +64,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index d7c34fa72b4b..dce35eb79dbe 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -91,3 +91,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 2642494c97a1..b7a024b7951b 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -83,3 +83,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index e7b09b7b7d25..f7f834cd3448 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -158,3 +158,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 16314fcc6e56..76a2bab3bc6f 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -74,3 +74,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 328aa90240ce..69e3570e03dd 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -118,3 +118,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 8ea46eed26e2..0f6f0fe13bfb 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -104,3 +104,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index 5eeac7302329..f77089744996 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -57,3 +57,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index da4d9ec62fc6..4d427863756f 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -105,3 +105,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index c94c732188fb..5f663f848db1 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -99,3 +99,7 @@ &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 22271818f901..2033411240c7 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -62,3 +62,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 79a9633ec417..77d1687b4228 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -127,3 +127,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index db744a5e122d..983149b55269 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -39,3 +39,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 9e267d38df4c..ca41481b44bd 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -101,3 +101,7 @@ &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index d266131652ad..aa69e656d395 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -182,3 +182,7 @@ &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index f5bf6586ae07..c7143a9daa1a 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -104,3 +104,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index d173bcd93b91..03c1ab188576 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -115,3 +115,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index f47afe36d857..36efe410dcd7 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -31,5 +31,238 @@ linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "bcm53xx:green:usb2"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + + power { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + }; + + wifi-disabled { + label = "bcm53xx:amber:wifi-disabled"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + wifi-enabled { + label = "bcm53xx:white:wifi-enabled"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + bluebar1 { + label = "bcm53xx:white:bluebar1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + + bluebar2 { + label = "bcm53xx:white:bluebar2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + + bluebar3 { + label = "bcm53xx:white:bluebar3"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + + bluebar4 { + label = "bcm53xx:white:bluebar4"; + gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; + + bluebar5 { + label = "bcm53xx:white:bluebar5"; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + }; + + bluebar6 { + label = "bcm53xx:white:bluebar6"; + gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + }; + + bluebar7 { + label = "bcm53xx:white:bluebar7"; + gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; + }; + + bluebar8 { + label = "bcm53xx:white:bluebar8"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + }; + + mdio-bus-mux { + /* BIT(9) = 1 => external mdio */ + mdio_ext: mdio@200 { + reg = <0x200>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio-mii-mux { + compatible = "mdio-mux-mmioreg"; + mdio-parent-bus = <&mdio_ext>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1800c1c0 0x4>; + + /* BIT(6) = mdc, BIT(7) = mdio */ + mux-mask = <0xc0>; + + mdio-mii@0 { + /* Enable MII function */ + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "brcm,bcm53125"; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + reset-names = "robo_reset"; + reg = <0>; + dsa,member = <1 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan5"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan6"; + }; + + port@4 { + reg = <4>; + label = "lan3"; + }; + + sw1_p8: port@8 { + reg = <8>; + ethernet = <&sw0_p0>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>; +}; + +&srab { + compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab"; + status = "okay"; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan7"; + }; + + port@2 { + reg = <2>; + label = "lan4"; + }; + + port@3 { + reg = <3>; + label = "lan8"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@8 { + reg = <8>; + ethernet = <&gmac2>; + label = "cpu"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + sw0_p0: port@0 { + reg = <0>; + label = "extsw"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index a5cef51cfe4f..3e5e9972cd97 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -60,3 +60,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index 7496aabf8f77..7acbecd42950 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -60,3 +60,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index 53aaa5212610..f4558d9d2769 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -100,3 +100,7 @@ &spi_nor { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 0e718edc065a..30719380b6c0 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -91,3 +91,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi index 4840a782fc05..f7c3e274b354 100644 --- a/arch/arm/boot/dts/bcm47094.dtsi +++ b/arch/arm/boot/dts/bcm47094.dtsi @@ -7,9 +7,10 @@ #include "bcm4708.dtsi" / { - usb3_phy: usb3-phy { - compatible = "brcm,ns-bx-usb3-phy"; - }; +}; + +&usb3_phy { + compatible = "brcm,ns-bx-usb3-phy"; }; &uart0 { diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index ef995e50ee12..bc607d11eef8 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -154,13 +154,6 @@ clock-names = "phy-ref-clk"; }; - usb3_phy: usb3-phy { - compatible = "brcm,ns-ax-usb3-phy"; - reg = <0x18105000 0x1000>, <0x18003000 0x1000>; - reg-names = "dmp", "ccb-mii"; - #phy-cells = <0>; - }; - axi@18000000 { compatible = "brcm,bus-axi"; reg = <0x18000000 0x1000>; @@ -359,7 +352,33 @@ reg = <0x18003000 0x8>; #size-cells = <1>; #address-cells = <0>; - status = "disabled"; + }; + + mdio-bus-mux { + compatible = "mdio-mux-mmioreg"; + mdio-parent-bus = <&mdio>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x18003000 0x4>; + mux-mask = <0x200>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + usb3_dmp: syscon@18105000 { + reg = <0x18105000 0x1000>; }; i2c0: i2c@18009000 { diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi index 16007d72c346..453a2a37dabd 100644 --- a/arch/arm/boot/dts/bcm53573.dtsi +++ b/arch/arm/boot/dts/bcm53573.dtsi @@ -48,6 +48,14 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts index 2e08c895f281..934f07adfe3c 100644 --- a/arch/arm/boot/dts/bcm94708.dts +++ b/arch/arm/boot/dts/bcm94708.dts @@ -42,3 +42,7 @@ reg = <0x00000000 0x08000000>; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts index c37616c67edc..31e4dd098776 100644 --- a/arch/arm/boot/dts/bcm94709.dts +++ b/arch/arm/boot/dts/bcm94709.dts @@ -42,3 +42,7 @@ reg = <0x00000000 0x08000000>; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 40e694bfe5ca..17f63c7a0437 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -90,3 +90,7 @@ }; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts index 3076e81699cf..11b0f5ed99e6 100644 --- a/arch/arm/boot/dts/bcm953012hr.dts +++ b/arch/arm/boot/dts/bcm953012hr.dts @@ -95,3 +95,7 @@ reg = <0x00700000 0x00900000>; }; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index 79c168e2714b..e798055d6989 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -113,3 +113,7 @@ &uart1 { status = "okay"; }; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index db67377af266..d2f7d984bba5 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -50,6 +50,16 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <1>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 516a7ce25791..99d6872a6dfc 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -45,6 +45,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <1>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu2: cpu@2 { @@ -52,6 +63,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <2>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu3: cpu@3 { @@ -59,6 +81,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <3>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; }; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts index 14dff3e188ed..0102ffc5aa53 100644 --- a/arch/arm/boot/dts/da850-enbw-cmc.dts +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -35,6 +35,10 @@ }; }; +&ref_clk { + clock-frequency = <24000000>; +}; + &edma0 { ti,edma-reserved-slot-ranges = <32 50>; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 0e82bb988fde..f9b757905845 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -27,6 +27,65 @@ spi0 = &spi1; }; + backlight: backlight-pwm { + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>; + power-supply = <&backlight_lcd>; + compatible = "pwm-backlight"; + /* + * The PWM here corresponds to production hardware. The + * schematic needs to be 1015171 (15 March 2010), Rev A + * or newer. + */ + pwms = <&ecap2 0 50000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; + default-brightness-level = <7>; + }; + + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + /* + * The vpif and the LCD are mutually exclusive. + * To enable VPIF, change the status below to 'disabled' then + * then change the status of the vpif below to 'okay' + */ + status = "okay"; + enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */ + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + native-mode = <&timing0>; + timing0: 480x272 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <4>; + vsync-len = <11>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -35,6 +94,15 @@ regulator-boot-on; }; + backlight_lcd: backlight-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_backlight_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */ + enable-active-high; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "DA850/OMAP-L138 EVM"; @@ -63,6 +131,14 @@ }; }; +&ecap2 { + status = "okay"; +}; + +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -93,6 +169,10 @@ }; }; +&sata { + status = "okay"; +}; + &serial0 { status = "okay"; }; @@ -109,6 +189,10 @@ status = "okay"; }; +&lcdc { + status = "okay"; +}; + &i2c0 { status = "okay"; clock-frequency = <100000>; @@ -336,5 +420,10 @@ &vpif { pinctrl-names = "default"; pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>; - status = "okay"; + /* + * The vpif and the LCD are mutually exclusive. + * To enable VPIF, disable the ti,tilcdc,panel then + * change the status below to 'okay' + */ + status = "disabled"; }; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 0edf769ea95c..0177e3ed20fe 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -123,6 +123,10 @@ }; }; +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -175,6 +179,11 @@ status = "okay"; }; +&sata_refclk { + status = "okay"; + clock-frequency = <100000000>; +}; + &sata { status = "okay"; }; diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index ee3932475ce7..c4729d0e6c19 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -173,6 +173,15 @@ rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; }; + bt_slow_clk: bt-clock { + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>, <&bt_clock_bias>; + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&ecap2 0 30518 0>; + }; + /* ARM local RAM */ memory@ffff0000 { compatible = "syscon", "simple-mfd"; @@ -191,6 +200,10 @@ }; }; +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -212,6 +225,20 @@ bias-disable; }; }; + + bt_clock_bias: bt-clock-bias-groups { + disable { + groups = "cp2"; + bias-disable; + }; + }; + + bt_pic_bias: bt-pic-bias-groups { + disable { + groups = "cp20"; + bias-disable; + }; + }; }; /* Input port 1 */ @@ -221,6 +248,22 @@ pinctrl-0 = <&serial1_rxtx_pins>; }; +&serial2 { + pinctrl-names = "default"; + pinctrl-0 = <&serial2_rxtx_pins>, <&serial2_rtscts_pins>, <&bt_pic_bias>; + status = "okay"; + + bluetooth { + compatible = "ti,cc2560"; + clocks = <&bt_slow_clk>; + clock-names = "ext_clock"; + enable-gpios = <&gpio 73 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + nvmem-cells = <&bdaddr>; + nvmem-cell-names = "bd-address"; + }; +}; + &rtc0 { status = "okay"; }; @@ -239,6 +282,12 @@ pagesize = <64>; read-only; reg = <0x50>; + #address-cells = <1>; + #size-cells = <1>; + + bdaddr: bdaddr@3f06 { + reg = <0x3f06 0x06>; + }; }; }; @@ -323,6 +372,10 @@ }; }; +&ecap2 { + status = "okay"; +}; + &ehrpwm0 { status = "okay"; }; @@ -336,6 +389,39 @@ gpios = <6 GPIO_ACTIVE_HIGH>; output-high; }; + + /* Don't impede Bluetooth clock signal */ + bt_clock_en { + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + input; + }; + + /* + * There is a PIC microcontroller for interfacing with an Apple MFi + * chip. This interferes with normal Bluetooth operation, so we need + * to make sure it is turned off. Note: The publicly available + * schematics from LEGO don't show that these pins are connected to + * anything, but they are present in the source code from LEGO. + */ + + bt_pic_en { + gpio-hog; + gpios = <51 GPIO_ACTIVE_HIGH>; + output-low; + }; + + bt_pic_rst { + gpio-hog; + gpios = <78 GPIO_ACTIVE_HIGH>; + output-high; + }; + + bt_pic_cts { + gpio-hog; + gpios = <87 GPIO_ACTIVE_HIGH>; + input; + }; }; &usb_phy { diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 0f4f817a9e22..47aa53ba6b92 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -32,6 +32,25 @@ reg = <0xfffee000 0x2000>; }; }; + clocks: clocks { + ref_clk: ref_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ref_clk"; + }; + sata_refclk: sata_refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "sata_refclk"; + status = "disabled"; + }; + usb_refclkin: usb_refclkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "usb_refclkin"; + status = "disabled"; + }; + }; dsp: dsp@11800000 { compatible = "ti,da850-dsp"; reg = <0x11800000 0x40000>, @@ -42,6 +61,8 @@ reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; interrupt-parent = <&intc>; interrupts = <28>; + clocks = <&psc0 15>; + resets = <&psc0 15>; status = "disabled"; }; soc@1c00000 { @@ -52,6 +73,38 @@ ranges = <0x0 0x01c00000 0x400000>; interrupt-parent = <&intc>; + psc0: clock-controller@10000 { + compatible = "ti,da850-psc0"; + reg = <0x10000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>, + <&pll0_sysclk 4>, <&pll0_sysclk 6>, + <&async1_clk>; + clock-names = "pll0_sysclk1", "pll0_sysclk2", + "pll0_sysclk4", "pll0_sysclk6", + "async1"; + }; + pll0: clock-controller@11000 { + compatible = "ti,da850-pll0"; + reg = <0x11000 0x1000>; + clocks = <&ref_clk>, <&pll1_sysclk 3>; + clock-names = "clksrc", "extclksrc"; + + pll0_pllout: pllout { + #clock-cells = <0>; + }; + pll0_sysclk: sysclk { + #clock-cells = <1>; + }; + pll0_auxclk: auxclk { + #clock-cells = <0>; + }; + pll0_obsclk: obsclk { + #clock-cells = <0>; + }; + }; pmx_core: pinmux@14120 { compatible = "pinctrl-single"; reg = <0x14120 0x50>; @@ -281,8 +334,41 @@ usb_phy: usb-phy { compatible = "ti,da830-usb-phy"; #phy-cells = <1>; + clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>; + clock-names = "usb0_clk48", "usb1_clk48"; status = "disabled"; }; + usb_phy_clk: usb-phy-clocks { + compatible = "ti,da830-usb-phy-clocks"; + #clock-cells = <1>; + clocks = <&psc1 1>, <&usb_refclkin>, + <&pll0_auxclk>; + clock-names = "fck", "usb_refclkin", "auxclk"; + }; + ehrpwm_tbclk: ehrpwm_tbclk { + compatible = "ti,da830-tbclksync"; + #clock-cells = <0>; + clocks = <&psc1 17>; + clock-names = "fck"; + }; + div4p5_clk: div4.5 { + compatible = "ti,da830-div4p5ena"; + #clock-cells = <0>; + clocks = <&pll0_pllout>; + clock-names = "pll0_pllout"; + }; + async1_clk: async1 { + compatible = "ti,da850-async1-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 3>, <&div4p5_clk>; + clock-names = "pll0_sysclk3", "div4.5"; + }; + async3_clk: async3 { + compatible = "ti,da850-async3-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>; + clock-names = "pll0_sysclk2", "pll1_sysclk2"; + }; }; edma0: edma@0 { compatible = "ti,edma3-tpcc"; @@ -294,18 +380,21 @@ #dma-cells = <2>; ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; + power-domains = <&psc0 0>; }; edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc0 1>; }; edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc0 2>; }; edma1: edma@230000 { compatible = "ti,edma3-tpcc"; @@ -317,12 +406,14 @@ #dma-cells = <2>; ti,tptcs = <&edma1_tptc0 7>; + power-domains = <&psc1 0>; }; edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc1 21>; }; serial0: serial@42000 { compatible = "ti,da830-uart", "ns16550a"; @@ -330,6 +421,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <25>; + clocks = <&psc0 9>; + power-domains = <&psc0 9>; status = "disabled"; }; serial1: serial@10c000 { @@ -338,6 +431,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <53>; + clocks = <&psc1 12>; + power-domains = <&psc1 12>; status = "disabled"; }; serial2: serial@10d000 { @@ -346,6 +441,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <61>; + clocks = <&psc1 13>; + power-domains = <&psc1 13>; status = "disabled"; }; rtc0: rtc@23000 { @@ -353,6 +450,8 @@ reg = <0x23000 0x1000>; interrupts = <19 19>; + clocks = <&pll0_auxclk>; + clock-names = "int-clk"; status = "disabled"; }; i2c0: i2c@22000 { @@ -361,6 +460,7 @@ interrupts = <15>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pll0_auxclk>; status = "disabled"; }; i2c1: i2c@228000 { @@ -369,11 +469,21 @@ interrupts = <51>; #address-cells = <1>; #size-cells = <0>; + clocks = <&psc1 11>; + power-domains = <&psc1 11>; status = "disabled"; }; + clocksource: timer@20000 { + compatible = "ti,da830-timer"; + reg = <0x20000 0x1000>; + interrupts = <12>, <13>; + interrupt-names = "tint12", "tint34"; + clocks = <&pll0_auxclk>; + }; wdt: wdt@21000 { compatible = "ti,davinci-wdt"; reg = <0x21000 0x1000>; + clocks = <&pll0_auxclk>; status = "disabled"; }; mmc0: mmc@40000 { @@ -384,12 +494,14 @@ interrupts = <16>; dmas = <&edma0 16 0>, <&edma0 17 0>; dma-names = "rx", "tx"; + clocks = <&psc0 5>; status = "disabled"; }; vpif: video@217000 { compatible = "ti,da850-vpif"; reg = <0x217000 0x1000>; interrupts = <92>; + power-domains = <&psc1 9>; status = "disabled"; /* VPIF capture port */ @@ -412,6 +524,7 @@ interrupts = <72>; dmas = <&edma1 28 0>, <&edma1 29 0>; dma-names = "rx", "tx"; + clocks = <&psc1 18>; status = "disabled"; }; ehrpwm0: pwm@300000 { @@ -419,6 +532,9 @@ "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; + clocks = <&psc1 17>, <&ehrpwm_tbclk>; + clock-names = "fck", "tbclk"; + power-domains = <&psc1 17>; status = "disabled"; }; ehrpwm1: pwm@302000 { @@ -426,6 +542,9 @@ "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x302000 0x2000>; + clocks = <&psc1 17>, <&ehrpwm_tbclk>; + clock-names = "fck", "tbclk"; + power-domains = <&psc1 17>; status = "disabled"; }; ecap0: ecap@306000 { @@ -433,6 +552,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x306000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; ecap1: ecap@307000 { @@ -440,6 +562,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x307000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; ecap2: ecap@308000 { @@ -447,6 +572,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x308000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; spi0: spi@41000 { @@ -459,6 +587,8 @@ interrupts = <20>; dmas = <&edma0 14 0>, <&edma0 15 0>; dma-names = "rx", "tx"; + clocks = <&psc0 4>; + power-domains = <&psc0 4>; status = "disabled"; }; spi1: spi@30e000 { @@ -471,6 +601,8 @@ interrupts = <56>; dmas = <&edma0 18 0>, <&edma0 19 0>; dma-names = "rx", "tx"; + clocks = <&psc1 10>; + power-domains = <&psc1 10>; status = "disabled"; }; usb0: usb@200000 { @@ -482,6 +614,8 @@ dr_mode = "otg"; phys = <&usb_phy 0>; phy-names = "usb-phy"; + clocks = <&psc1 1>; + clock-ranges; status = "disabled"; #address-cells = <1>; @@ -505,6 +639,7 @@ interrupts = <58>; #dma-cells = <2>; #dma-channels = <4>; + power-domains = <&psc1 1>; status = "okay"; }; }; @@ -512,13 +647,31 @@ compatible = "ti,da850-ahci"; reg = <0x218000 0x2000>, <0x22c018 0x4>; interrupts = <67>; + clocks = <&psc1 8>, <&sata_refclk>; + clock-names = "fck", "refclk"; status = "disabled"; }; + pll1: clock-controller@21a000 { + compatible = "ti,da850-pll1"; + reg = <0x21a000 0x1000>; + clocks = <&ref_clk>; + clock-names = "clksrc"; + + pll1_sysclk: sysclk { + #clock-cells = <1>; + }; + pll1_obsclk: obsclk { + #clock-cells = <0>; + }; + }; mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x224000 0x1000>; + clocks = <&psc1 5>; + clock-names = "fck"; + power-domains = <&psc1 5>; status = "disabled"; }; eth0: ethernet@220000 { @@ -534,6 +687,8 @@ 35 36 >; + clocks = <&psc1 5>; + power-domains = <&psc1 5>; status = "disabled"; }; usb1: usb@225000 { @@ -542,6 +697,7 @@ interrupts = <59>; phys = <&usb_phy 1>; phy-names = "usb-phy"; + clocks = <&psc1 2>; status = "disabled"; }; gpio: gpio@226000 { @@ -552,6 +708,8 @@ interrupts = <42 43 44 45 46 47 48 49 50>; ti,ngpio = <144>; ti,davinci-gpio-unbanked = <0>; + clocks = <&psc1 3>; + clock-names = "gpio"; status = "disabled"; interrupt-controller; #interrupt-cells = <2>; @@ -700,6 +858,17 @@ <&pmx_core 142 147 1>, <&pmx_core 143 146 1>; }; + psc1: clock-controller@227000 { + compatible = "ti,da850-psc1"; + reg = <0x227000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, + <&async3_clk>; + clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3"; + assigned-clocks = <&async3_clk>; + assigned-clock-parents = <&pll1_sysclk 2>; + }; pinconf: pin-controller@22c00c { compatible = "ti,da850-pupd"; reg = <0x22c00c 0x8>; @@ -713,6 +882,7 @@ reg-names = "mpu", "dat"; interrupts = <54>; interrupt-names = "common"; + power-domains = <&psc1 7>; status = "disabled"; dmas = <&edma0 1 1>, <&edma0 0 1>; @@ -724,6 +894,9 @@ reg = <0x213000 0x1000>; interrupts = <52>; max-pixelclock = <37500>; + clocks = <&psc1 16>; + clock-names = "fck"; + power-domains = <&psc1 16>; status = "disabled"; }; }; @@ -735,6 +908,9 @@ reg = <0x68000000 0x00008000>; ranges = <0 0 0x60000000 0x08000000 1 0 0x68000000 0x00008000>; + clocks = <&psc0 3>; + clock-names = "aemif"; + clock-ranges; status = "disabled"; }; memctrl: memory-controller@b0000000 { diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 33230c8b2951..7e18147dc563 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -20,6 +20,11 @@ id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; }; + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + }; + sound0: sound0 { compatible = "simple-audio-card"; simple-audio-card,name = "DRA7xx-EVM"; @@ -198,8 +203,13 @@ extcon = <&extcon_usb1>; }; +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; + &usb2 { dr_mode = "host"; + extcon = <&extcon_usb2>; }; &atl { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 0894593860d6..6ed5f9156270 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -106,11 +106,6 @@ enable-active-high; }; - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; - }; - vtt_fixed: fixedregulator-vtt { compatible = "regulator-fixed"; regulator-name = "vtt_fixed"; @@ -406,10 +401,6 @@ vdd-supply = <&smps123_reg>; }; -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &elm { status = "okay"; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e03495a799ce..a0ddf497e8cd 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1893,7 +1893,7 @@ }; }; - dcan1: can@481cc000 { + dcan1: can@4ae3c000 { compatible = "ti,dra7-d_can"; ti,hwmods = "dcan1"; reg = <0x4ae3c000 0x2000>; @@ -1903,7 +1903,7 @@ status = "disabled"; }; - dcan2: can@481d0000 { + dcan2: can@48480000 { compatible = "ti,dra7-d_can"; ti,hwmods = "dcan2"; reg = <0x48480000 0x2000>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index b7aeaeeead3b..c471bf3277b4 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -265,3 +265,11 @@ /* Supplied by VDA_1V8_PHY */ vdda_video-supply = <&lp8732_ldo1_reg>; }; + +&extcon_usb1 { + vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; +}; + +&extcon_usb2 { + vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index df174f5c15d1..e297b923b71a 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -391,6 +391,7 @@ &usb2 { dr_mode = "host"; + extcon = <&extcon_usb2>; }; &mmc1 { diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 91e93ab588ca..8f9df09155d8 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -18,6 +18,16 @@ compatible = "arm,cortex-a15"; reg = <1>; operating-points-v2 = <&cpu0_opp_table>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ + + vbb-supply = <&abb_mpu>; }; }; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index c07f0051844d..5a46163d465f 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -436,3 +436,17 @@ phys = <&pcie1_phy>, <&pcie2_phy>; phy-names = "pcie-phy0", "pcie-phy1"; }; + +&extcon_usb1 { + vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; +}; + +&extcon_usb2 { + vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; +}; + +&m_can0 { + can-transceiver { + max-bitrate = <5000000>; + }; +}; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 1c88c581ff18..613e4dc0ed3e 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -11,9 +11,73 @@ / { compatible = "ti,dra762", "ti,dra7"; + ocp { + target-module@42c01900 { + compatible = "ti,sysc-dra7-mcan", "ti,sysc"; + ranges = <0x0 0x42c00000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x42c01900 0x4>, + <0x42c01904 0x4>, + <0x42c01908 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET | + SYSC_DRA7_MCAN_ENAWAKEUP)>; + ti,syss-mask = <1>; + clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>; + clock-names = "fck"; + + m_can0: mcan@1a00 { + compatible = "bosch,m_can"; + reg = <0x1a00 0x4000>, <0x0 0x18FC>; + reg-names = "m_can", "message_ram"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&mcan_clk>, <&l3_iclk_div>; + clock-names = "cclk", "hclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + }; + }; + }; + }; /* MCAN interrupts are hard-wired to irqs 67, 68 */ &crossbar_mpu { ti,irqs-skip = <10 67 68 133 139 140>; }; + +&scm_conf_clocks { + dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_gmac_x2_ck>; + ti,max-div = <63>; + reg = <0x03fc>; + ti,bit-shift=<20>; + ti,latch-bit=<26>; + assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>; + assigned-clock-rates = <80000000>; + }; + + dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>; + reg = <0x3fc>; + ti,bit-shift = <29>; + ti,latch-bit=<26>; + assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; + assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>; + }; + + mcan_clk: mcan_clk@3fc { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>; + ti,bit-shift = <27>; + reg = <0x3fc>; + }; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 0af44b7eadb9..1bb8e5c9d029 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the KZM9D board * * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index fec1241b858f..373ea8720769 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the EMEV2 SoC * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 962af97c1883..27a1ee28c3bb 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -78,6 +78,22 @@ compatible = "arm,cortex-a7"; reg = <1>; clock-frequency = <1000000000>; + clocks = <&cmu CLK_ARM_CLK>; + clock-names = "cpu"; + #cooling-cells = <2>; + + operating-points = < + 1000000 1150000 + 900000 1112500 + 800000 1075000 + 700000 1037500 + 600000 1000000 + 500000 962500 + 400000 925000 + 300000 887500 + 200000 850000 + 100000 850000 + >; }; }; @@ -226,7 +242,7 @@ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_TMU_APBIF>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index dfe41b698745..6085e92ac2d7 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -735,7 +735,7 @@ reg = <0x100C0000 0x100>; interrupts = <2 4>; status = "disabled"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; jpeg_codec: jpeg-codec@11840000 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 88fb47cef9a8..b6091c27f155 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -55,6 +55,19 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x901>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <160000>; + + operating-points = < + 1200000 1250000 + 1000000 1150000 + 800000 1075000 + 500000 975000 + 400000 975000 + 200000 950000 + >; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index dc11ca1673e8..c0476c290977 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -94,6 +94,8 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; key-down { gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; @@ -138,6 +140,8 @@ compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&max77693_irq>; reg = <0x66>; regulators { @@ -184,6 +188,8 @@ compatible = "maxim,max17047"; interrupt-parent = <&gpx2>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&max77693_fuel_irq>; reg = <0x36>; maxim,over-heat-temp = <700>; @@ -574,6 +580,8 @@ compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_NONE>; + pinctrl-0 = <&max77686_irq>; + pinctrl-names = "default"; reg = <0x09>; #clock-cells = <1>; @@ -1007,6 +1015,31 @@ pinctrl-names = "default"; pinctrl-0 = <&sleep1>; + gpio_keys: gpio-keys { + samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx0-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max77693_irq: max77693-irq { + samsung,pins = "gpx1-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + max77693_fuel_irq: max77693-fuel-irq { + samsung,pins = "gpx2-3"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + sdhci2_cd: sdhci2-cd-irq { + samsung,pins = "gpx3-4"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + hdmi_hpd: hdmi-hpd { samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; @@ -1238,7 +1271,7 @@ bus-width = <4>; cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; cd-inverted; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi deleted file mode 100644 index 489b58c619ee..000000000000 --- a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos4412 TMU sensor configuration - * - * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <16>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <55>; -samsung,tmu_min_efuse_value = <40>; -samsung,tmu_max_efuse_value = <100>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 7b43c10c510b..51f72f0327e5 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -49,21 +49,30 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA01>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@a02 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA02>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; cpu@a03 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0xA03>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 5d2f0a06fbef..67f9b4504a42 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -169,6 +169,11 @@ pwm: pwm@12dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x12DD0000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 2daf505b3d08..da163a40af15 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -84,6 +84,29 @@ compatible = "arm,cortex-a15"; reg = <1>; clock-frequency = <1700000000>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <140000>; + + operating-points = < + 1700000 1300000 + 1600000 1250000 + 1500000 1225000 + 1400000 1200000 + 1300000 1150000 + 1200000 1125000 + 1100000 1100000 + 1000000 1075000 + 900000 1050000 + 800000 1025000 + 700000 1012500 + 600000 1000000 + 500000 975000 + 400000 950000 + 300000 937500 + 200000 925000 + >; + #cooling-cells = <2>; /* min followed by max */ }; }; @@ -278,7 +301,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; sata: sata@122f0000 { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 20e789ea136f..57fc9c949e54 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -93,7 +93,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu1: tmu@10064000 { @@ -102,7 +102,7 @@ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu2: tmu@10068000 { @@ -111,7 +111,7 @@ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu3: tmu@1006c000 { @@ -120,7 +120,7 @@ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; mmc_0: mmc@12200000 { diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index a8e449471304..0ee6e92a3c29 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -38,6 +38,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -49,6 +50,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -60,6 +62,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -83,6 +86,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -94,6 +98,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -105,6 +110,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x103>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; diff --git a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi deleted file mode 100644 index fbc77cb58473..000000000000 --- a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree sources for Exynos5420 TMU sensor configuration - * - * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - * Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org> - */ - -#include <dt-bindings/thermal/thermal_exynos.h> - -#thermal-sensor-cells = <0>; -samsung,tmu_gain = <8>; -samsung,tmu_reference_voltage = <16>; -samsung,tmu_noise_cancel_mode = <4>; -samsung,tmu_efuse_value = <55>; -samsung,tmu_min_efuse_value = <0>; -samsung,tmu_max_efuse_value = <100>; -samsung,tmu_first_point_trim = <25>; -samsung,tmu_second_point_trim = <85>; -samsung,tmu_default_temp_offset = <50>; -samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index f4e8c5823bc2..aaff15880761 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -738,7 +738,7 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu1: tmu@10064000 { @@ -747,7 +747,7 @@ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu2: tmu@10068000 { @@ -756,7 +756,7 @@ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu3: tmu@1006c000 { @@ -765,7 +765,7 @@ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_gpu: tmu@100a0000 { @@ -774,7 +774,7 @@ interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos5420-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; sysmmu_g2dr: sysmmu@10a60000 { diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index 7c130a00d1a8..e4a5857c135f 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -37,6 +37,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -48,6 +49,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -59,6 +61,7 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x103>; + clocks = <&clock CLK_KFC_CLK>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; @@ -69,8 +72,8 @@ cpu4: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; - clocks = <&clock CLK_ARM_CLK>; reg = <0x0>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -82,6 +85,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -93,6 +97,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; @@ -104,6 +109,7 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; + clocks = <&clock CLK_ARM_CLK>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts new file mode 100644 index 000000000000..ebefb7297379 --- /dev/null +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the Storm Semiconductor SL93512R_BRD + * Gemini reference design, also initially called + * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor. + * The series were later acquired by Cortina Systems. + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD"; + compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 64 MB Samsung K4H511638B */ + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-wps { + debounce-interval = <50>; + wakeup-source; + linux,code = <KEY_WPS_BUTTON>; + label = "WPS"; + /* Conflict with NAND flash */ + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + button-setup { + debounce-interval = <50>; + wakeup-source; + linux,code = <KEY_SETUP>; + label = "factory reset"; + /* Conflict with NAND flash */ + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-green-harddisk { + label = "sq201:green:harddisk"; + /* Conflict with LCD (no problem) */ + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + led-green-wireless { + label = "sq201:green:wireless"; + /* Conflict with NAND flash CE0 (no problem) */ + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + /* Uses MDC and MDIO */ + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* This is a Marvell 88E1111 ethernet transciever */ + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + /* Check pin collisions */ + gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + switch@0 { + compatible = "vitesse,vsc7385"; + reg = <0>; + /* Specified for 2.5 MHz or below */ + spi-max-frequency = <2500000>; + gpio-controller; + #gpio-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + vsc: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + + soc { + flash@30000000 { + status = "okay"; + /* 16MB of flash */ + reg = <0x30000000 0x01000000>; + + partition@0 { + label = "BOOT"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@120000 { + label = "Kern"; + reg = <0x00020000 0x00300000>; + }; + partition@320000 { + label = "Ramdisk"; + reg = <0x00320000 0x00600000>; + }; + partition@920000 { + label = "Application"; + reg = <0x00920000 0x00600000>; + }; + partition@f20000 { + label = "VCTL"; + reg = <0x00f20000 0x00020000>; + read-only; + }; + partition@f40000 { + label = "CurConf"; + reg = <0x00f40000 0x000a0000>; + read-only; + }; + partition@fe0000 { + label = "FIS directory"; + reg = <0x00fe0000 0x00020000>; + read-only; + }; + }; + + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0egrp cover line 16 used by HD LED + * gpio0fgrp cover line 17, 18 used by wireless LED and reset button + * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY + * gpio0kgrp cover line 31 used by USB LED + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0egrp", + "gpio0fgrp", + "gpio0hgrp"; + }; + }; + /* + * gpio1dgrp cover lines used by SPI for + * the Vitesse chip (28-31) + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + }; + /* Control pad skew comes from sl_switch.c in the vendor code */ + conf0 { + pins = "P10 GMAC1 TXC"; + skew-delay = <5>; + }; + conf1 { + pins = "V11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf2 { + pins = "T11 GMAC1 RXC"; + skew-delay = <8>; + }; + conf3 { + pins = "U11 GMAC1 RXDV"; + skew-delay = <7>; + }; + conf4 { + pins = "V7 GMAC0 TXC"; + skew-delay = <10>; + }; + conf5 { + pins = "P8 GMAC0 TXEN"; + skew-delay = <7>; /* 5 at another place? */ + }; + conf6 { + pins = "T8 GMAC0 RXC"; + skew-delay = <15>; + }; + conf7 { + pins = "R8 GMAC0 RXDV"; + skew-delay = <0>; + }; + conf8 { + /* The data lines all have default skew */ + pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", + "P9 GMAC0 RXD2", "R9 GMAC0 RXD3", + "R11 GMAC1 RXD0", "P11 GMAC1 RXD1", + "V12 GMAC1 RXD2", "U12 GMAC1 RXD3", + "R10 GMAC1 TXD0", "T10 GMAC1 TXD1", + "U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; + skew-delay = <7>; + }; + /* Appears in sl351x_gmac.c in the vendor code */ + conf9 { + pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", + "R7 GMAC0 TXD2", "P7 GMAC0 TXD3"; + skew-delay = <5>; + }; + }; + }; + }; + + /* Both interfaces brought out on SATA connectors */ + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + + pci@50000000 { + status = "okay"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + + ata@63000000 { + status = "okay"; + }; + + ata@63400000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index e5cf9d1a98cd..3787cf3763c4 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -55,6 +55,75 @@ }; }; + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + /* Uses MDC and MDIO */ + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* This is a Marvell 88E1111 ethernet transciever */ + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + /* Check pin collisions */ + gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + switch@0 { + compatible = "vitesse,vsc7395"; + reg = <0>; + /* Specified for 2.5 MHz or below */ + spi-max-frequency = <2500000>; + gpio-controller; + #gpio-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + vsc: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + soc { flash@30000000 { /* @@ -108,6 +177,7 @@ /* * gpio0fgrp cover line 18 used by reset button * gpio0ggrp cover line 20 used by info LED + * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY * gpio0kgrp cover line 31 used by USB LED */ gpio0_default_pins: pinctrl-gpio0 { @@ -115,9 +185,76 @@ function = "gpio0"; groups = "gpio0fgrp", "gpio0ggrp", + "gpio0hgrp", "gpio0kgrp"; }; }; + /* + * gpio0dgrp cover lines used by the SPI + * to the Vitesse G5x chip. + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + }; + /* Settings come from memory dump in PLATO */ + conf0 { + pins = "V8 GMAC0 RXDV"; + skew-delay = <0>; + }; + conf1 { + pins = "Y7 GMAC0 RXC"; + skew-delay = <15>; + }; + conf2 { + pins = "T8 GMAC0 TXEN"; + skew-delay = <7>; + }; + conf3 { + pins = "U8 GMAC0 TXC"; + skew-delay = <10>; + }; + conf4 { + pins = "T10 GMAC1 RXDV"; + skew-delay = <7>; + }; + conf5 { + pins = "Y11 GMAC1 RXC"; + skew-delay = <8>; + }; + conf6 { + pins = "W11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf7 { + pins = "V11 GMAC1 TXC"; + skew-delay = <5>; + }; + conf8 { + /* The data lines all have default skew */ + pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1", + "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3", + "T7 GMAC0 TXD0", "U6 GMAC0 TXD1", + "V7 GMAC0 TXD2", "U7 GMAC0 TXD3", + "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1", + "T11 GMAC1 RXD2", "W12 GMAC1 RXD3", + "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1", + "W10 GMAC1 TXD2", "T9 GMAC1 TXD3"; + skew-delay = <7>; + }; + /* Set up drive strength on GMAC0 and GMAC1 to 16 mA */ + conf9 { + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + drive-strength = <16>; + }; + }; }; }; @@ -132,6 +269,11 @@ pinctrl-0 = <&gpio0_default_pins>; }; + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + pci@50000000 { status = "okay"; interrupt-map-mask = <0xf800 0 0 7>; @@ -154,6 +296,23 @@ <0x6000 0 0 4 &pci_intc 2>; }; + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + ata@63000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi new file mode 100644 index 000000000000..e31a9e3c18a2 --- /dev/null +++ b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the GR-Peach audiocamera shield expansion board + * + * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> + */ + +#include "r7s72100.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/r7s72100-pinctrl.h> + +/ { + /* On-board camera clock. */ + camera_clk: camera_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +&pinctrl { + i2c1_pins: i2c1 { + /* P1_2 as SCL; P1_3 as SDA */ + pinmux = <RZA1_PINMUX(1, 2, 1)>, <RZA1_PINMUX(1, 3, 1)>; + }; + + vio_pins: vio { + /* CEU pins: VIO_D[0-10], VIO_VD, VIO_HD, VIO_CLK */ + pinmux = <RZA1_PINMUX(1, 0, 5)>, /* VIO_VD */ + <RZA1_PINMUX(1, 1, 5)>, /* VIO_HD */ + <RZA1_PINMUX(2, 0, 7)>, /* VIO_D0 */ + <RZA1_PINMUX(2, 1, 7)>, /* VIO_D1 */ + <RZA1_PINMUX(2, 2, 7)>, /* VIO_D2 */ + <RZA1_PINMUX(2, 3, 7)>, /* VIO_D3 */ + <RZA1_PINMUX(2, 4, 7)>, /* VIO_D4 */ + <RZA1_PINMUX(2, 5, 7)>, /* VIO_D5 */ + <RZA1_PINMUX(2, 6, 7)>, /* VIO_D6 */ + <RZA1_PINMUX(2, 7, 7)>, /* VIO_D7 */ + <RZA1_PINMUX(10, 0, 6)>; /* VIO_CLK */ + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <100000>; + + camera@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + + clocks = <&camera_clk>; + + port { + mt9v111_out: endpoint { + remote-endpoint = <&ceu_in>; + }; + }; + }; +}; + +&ceu { + pinctrl-names = "default"; + pinctrl-0 = <&vio_pins>; + + status = "okay"; + + port { + ceu_in: endpoint { + hsync-active = <1>; + vsync-active = <1>; + bus-width = <8>; + pclk-sample = <1>; + remote-endpoint = <&mt9v111_out>; + }; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index ed14aeac0566..50278715de76 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -56,6 +56,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; cpu@902 { @@ -65,6 +75,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; cpu@903 { @@ -74,6 +94,16 @@ next-level-cache = <&L2>; clocks = <&a9pll>; clock-names = "cpu"; + operating-points = < + /* kHz ignored */ + 1300000 1000000 + 1200000 1000000 + 1100000 1000000 + 800000 1000000 + 400000 1000000 + 200000 1000000 + >; + clock-latency = <100000>; }; }; diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts new file mode 100644 index 000000000000..db52ddccabc3 --- /dev/null +++ b/arch/arm/boot/dts/imx31-lite.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com> + +/dts-v1/; + +#include "imx31.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "LogicPD i.MX31 Lite"; + compatible = "logicpd,imx31-lite", "fsl,imx31"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x8000000>; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led1 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ata { + status = "okay"; +}; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&spi2 { + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13783"; + reg = <0>; + spi-cs-high; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + + fsl,mc13xxx-uses-adc; + fsl,mc13xxx-uses-rtc; + + regulators { + sw1a { /* QVCC */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + sw1b { /* QVCC */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2a { /* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2b { /* NVCC10 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + violo { /* NVCC1 and NVCC7 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + viohi { /* VIOHI */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vaudio { /* VAUDIO */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vcam { /* NVCC4 */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vgen { /* NVCC5 / NVCC8 and NVCC6 / NVCC9 */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc2 { /* NVCC3 */ + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&uart1 { + uart-has-rtscts; + status = "okay"; +}; + +/* Routed to the extension board */ +&uart2 { + uart-has-rtscts; + status = "okay"; +}; + +/* Routed to the extension board */ +&uart3 { + uart-has-rtscts; + status = "okay"; +}; + +&weim { + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x0 0x200000>; + bank-width = <2>; + linux,mtd-name = "physmap-flash.0"; + fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>; + }; + + ethernet@4,0 { + compatible = "smsc,lan9117", "smsc,lan9115"; + reg = <4 0x0 0x100>; + interrupt-parent = <&gpio1>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,irq-push-pull; + fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>; + }; +}; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 4642c8169a65..ca1419ca303c 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ // +// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com> // Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> / { @@ -15,11 +16,20 @@ memory { device_type = "memory"; }; aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + spi0 = &spi1; + spi1 = &spi2; + spi2 = &spi3; }; cpus { @@ -47,6 +57,14 @@ interrupt-parent = <&avic>; ranges; + iram: iram@1fffc000 { + compatible = "mmio-sram"; + reg = <0x1fffc000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1fffc000 0x4000>; + }; + aips@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -54,6 +72,34 @@ reg = <0x43f00000 0x100000>; ranges; + i2c1: i2c@43f80000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f80000 0x4000>; + interrupts = <10>; + clocks = <&clks 33>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@43f84000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f84000 0x4000>; + interrupts = <3>; + clocks = <&clks 35>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ata: ata@43f8c000 { + compatible = "fsl,imx31-pata", "fsl,imx27-pata"; + reg = <0x43f8c000 0x4000>; + interrupts = <15>; + clocks = <&clks 26>; + status = "disabled"; + }; + uart1: serial@43f90000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43f90000 0x4000>; @@ -72,6 +118,29 @@ status = "disabled"; }; + i2c2: i2c@43f98000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f98000 0x4000>; + interrupts = <4>; + clocks = <&clks 34>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@43fa4000 { + compatible = "fsl,imx31-cspi"; + reg = <0x43fa4000 0x4000>; + interrupts = <14>; + clocks = <&clks 10>, <&clks 53>; + clock-names = "ipg", "per"; + dmas = <&sdma 8 8 0>, <&sdma 9 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + kpp: kpp@43fa8000 { compatible = "fsl,imx31-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; @@ -106,6 +175,28 @@ reg = <0x50000000 0x100000>; ranges; + sdhci1: sdhci@50004000 { + compatible = "fsl,imx31-mmc"; + reg = <0x50004000 0x4000>; + interrupts = <9>; + clocks = <&clks 10>, <&clks 20>; + clock-names = "ipg", "per"; + dmas = <&sdma 20 3 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + sdhci2: sdhci@50008000 { + compatible = "fsl,imx31-mmc"; + reg = <0x50008000 0x4000>; + interrupts = <8>; + clocks = <&clks 10>, <&clks 21>; + clock-names = "ipg", "per"; + dmas = <&sdma 21 3 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + uart3: serial@5000c000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; @@ -115,6 +206,19 @@ status = "disabled"; }; + spi2: cspi@50010000 { + compatible = "fsl,imx31-cspi"; + reg = <0x50010000 0x4000>; + interrupts = <13>; + clocks = <&clks 10>, <&clks 54>; + clock-names = "ipg", "per"; + dmas = <&sdma 6 8 0>, <&sdma 7 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + iim: iim@5001c000 { compatible = "fsl,imx31-iim", "fsl,imx27-iim"; reg = <0x5001c000 0x1000>; @@ -137,6 +241,19 @@ #clock-cells = <1>; }; + spi3: cspi@53f84000 { + compatible = "fsl,imx31-cspi"; + reg = <0x53f84000 0x4000>; + interrupts = <17>; + clocks = <&clks 10>, <&clks 28>; + clock-names = "ipg", "per"; + dmas = <&sdma 10 8 0>, <&sdma 11 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gpt: timer@53f90000 { compatible = "fsl,imx31-gpt"; reg = <0x53f90000 0x4000>; @@ -144,6 +261,112 @@ clocks = <&clks 10>, <&clks 22>; clock-names = "ipg", "per"; }; + + gpio3: gpio@53fa4000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fa4000 0x4000>; + interrupts = <56>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rng@53fb0000 { + compatible = "fsl,imx31-rnga"; + reg = <0x53fb0000 0x4000>; + interrupts = <22>; + clocks = <&clks 29>; + }; + + gpio1: gpio@53fcc000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fcc000 0x4000>; + interrupts = <52>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@53fd0000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fd0000 0x4000>; + interrupts = <51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdma: sdma@53fd4000 { + compatible = "fsl,imx31-sdma"; + reg = <0x53fd4000 0x4000>; + interrupts = <34>; + clocks = <&clks 10>, <&clks 27>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin"; + }; + + rtc: rtc@53fd8000 { + compatible = "fsl,imx31-rtc", "fsl,imx21-rtc"; + reg = <0x53fd8000 0x4000>; + interrupts = <25>; + clocks = <&clks 2>, <&clks 40>; + clock-names = "ref", "ipg"; + }; + + wdog: wdog@53fdc000 { + compatible = "fsl,imx31-wdt", "fsl,imx21-wdt"; + reg = <0x53fdc000 0x4000>; + clocks = <&clks 41>; + }; + + pwm: pwm@53fe0000 { + compatible = "fsl,imx31-pwm", "fsl,imx27-pwm"; + reg = <0x53fe0000 0x4000>; + interrupts = <26>; + clocks = <&clks 10>, <&clks 42>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + emi@b8000000 { /* External Memory Interface */ + compatible = "simple-bus"; + reg = <0xb8000000 0x5000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + nfc: nand@b8000000 { + compatible = "fsl,imx31-nand", "fsl,imx27-nand"; + reg = <0xb8000000 0x1000>; + interrupts = <33>; + clocks = <&clks 9>; + dmas = <&sdma 30 17 0>; + dma-names = "rx-tx"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + weim: weim@b8002000 { + compatible = "fsl,imx31-weim", "fsl,imx27-weim"; + reg = <0xb8002000 0x1000>; + clocks = <&clks 56>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xa0000000 0x08000000 + 1 0 0xa8000000 0x08000000 + 2 0 0xb0000000 0x02000000 + 3 0 0xb2000000 0x02000000 + 4 0 0xb4000000 0x02000000 + 5 0 0xb6000000 0x02000000>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index f0622ec4ba9c..682a99783ee6 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -98,14 +98,6 @@ status = "okay"; }; -&usbh2 { - status = "okay"; -}; - -&usbh3 { - status = "okay"; -}; - &usbotg { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h index 97e6e7f4ebdd..43863347362e 100644 --- a/arch/arm/boot/dts/imx50-pinfunc.h +++ b/arch/arm/boot/dts/imx50-pinfunc.h @@ -34,7 +34,7 @@ #define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1 0x02c 0x2d8 0x000 0x2 0x0 #define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7 0x02c 0x2d8 0x000 0x6 0x0 #define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR 0x02c 0x2d8 0x000 0x7 0x0 -#define MX50_PAD_KEY_COL2__KPP_COL_1 0x030 0x2dc 0x000 0x0 0x0 +#define MX50_PAD_KEY_COL2__KPP_COL_2 0x030 0x2dc 0x000 0x0 0x0 #define MX50_PAD_KEY_COL2__GPIO4_4 0x030 0x2dc 0x000 0x1 0x0 #define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2 0x030 0x2dc 0x000 0x2 0x0 #define MX50_PAD_KEY_COL2__CTI_TRIGOUT6 0x030 0x2dc 0x000 0x6 0x0 @@ -44,7 +44,7 @@ #define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3 0x034 0x2e0 0x000 0x2 0x0 #define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7 0x034 0x2e0 0x000 0x6 0x0 #define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0 0x034 0x2e0 0x000 0x7 0x0 -#define MX50_PAD_KEY_COL3__KPP_COL_2 0x038 0x2e4 0x000 0x0 0x0 +#define MX50_PAD_KEY_COL3__KPP_COL_3 0x038 0x2e4 0x000 0x0 0x0 #define MX50_PAD_KEY_COL3__GPIO4_6 0x038 0x2e4 0x000 0x1 0x0 #define MX50_PAD_KEY_COL3__EIM_NANDF_READY0 0x038 0x2e4 0x7b4 0x2 0x0 #define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0 0x038 0x2e4 0x7b8 0x6 0x0 diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index a9b712db9f6c..7fae2ffb76fe 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -209,24 +209,6 @@ status = "disabled"; }; - usbh2: usb@53f80400 { - compatible = "fsl,imx50-usb", "fsl,imx27-usb"; - reg = <0x53f80400 0x0200>; - interrupts = <16>; - clocks = <&clks IMX5_CLK_USBOH3_GATE>; - dr_mode = "host"; - status = "disabled"; - }; - - usbh3: usb@53f80600 { - compatible = "fsl,imx50-usb", "fsl,imx27-usb"; - reg = <0x53f80600 0x0200>; - interrupts = <17>; - clocks = <&clks IMX5_CLK_USBOH3_GATE>; - dr_mode = "host"; - status = "disabled"; - }; - gpio1: gpio@53f84000 { compatible = "fsl,imx50-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index b8ca73d3d379..ba60b0cb3cc1 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -170,20 +170,15 @@ mux-ext-port = <3>; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; - - usbh1phy: usbh1phy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clk_usb>; - clock-names = "main_clk"; - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - vcc-supply = <&vusb_reg>; - #phy-cells = <0>; - }; + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1reg>; + clocks = <&clk_usb>; + clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + vcc-supply = <&vusb_reg>; + #phy-cells = <0>; }; }; @@ -401,6 +396,10 @@ status = "okay"; }; +&pmu { + secure-reg-access; +}; + &ssi2 { status = "okay"; }; @@ -429,7 +428,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_hub_reset>; - fsl,usbphy = <&usbh1phy>; + fsl,usbphy = <&usbphy1>; phy_type = "ulpi"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index b3d952f37cdc..e9e819f2b0b7 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -83,19 +83,12 @@ fsl,mux-ext-port = <3>; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; - - usbh1phy: usbh1phy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX5_CLK_USB_PHY_GATE>; - clock-names = "main_clk"; - clock-frequency = <19200000>; - #phy-cells = <0>; - }; + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + #phy-cells = <0>; }; }; @@ -275,7 +268,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - fsl,usbphy = <&usbh1phy>; + fsl,usbphy = <&usbphy1>; dr_mode = "host"; phy_type = "ulpi"; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 8a878687197b..469cce2c0357 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -476,6 +476,17 @@ status = "okay"; }; +&gpio1 { + unused-sd3-wp-gpio { + /* + * See pinctrl_esdhc1 below for more details on this + */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; @@ -542,7 +553,7 @@ rmi4-f11@11 { reg = <0x11>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; @@ -554,6 +565,10 @@ remote-endpoint = <&display_in>; }; +&pmu { + secure-reg-access; +}; + &ssi2 { status = "okay"; }; @@ -578,10 +593,47 @@ rave-sp { compatible = "zii,rave-sp-rdu1"; current-speed = <38400>; + #address-cells = <1>; + #size-cells = <1>; watchdog { compatible = "zii,rave-sp-watchdog"; }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + + eeprom@ae { + compatible = "zii,rave-sp-eeprom"; + reg = <0xae 0x200>; + zii,eeprom-name = "switch-eeprom"; + /* + * Not all RDU1s have this functionality, so we + * rely on the bootloader to enable this + */ + status = "disabled"; + }; }; }; @@ -620,6 +672,10 @@ status = "okay"; }; +&wdog1 { + status = "disabled"; +}; + &iomuxc { pinctrl_ampgpio: ampgpiogrp { fsl,pins = < @@ -660,6 +716,23 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + /* + * GPIO1_1 is not directly used by eSDHC1 in + * any capacity, but earlier versions of RDU1 + * used that pin as WP GPIO for eSDHC3 and + * because of that that pad has an external + * pull-up resistor. This is problematic + * because out of reset the pad is configured + * as ALT0 which serves as SD1_WP, which, when + * pulled high by and external pull-up, will + * inhibit execution of any write request to + * attached eMMC device. + * + * To avoid this problem we configure the pad + * to ALT1/GPIO and avoid driving SD1_WP + * signal high. + */ + MX51_PAD_GPIO1_1__GPIO1_1 0x0000 >; }; diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts new file mode 100644 index 000000000000..26cf08549df4 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx51.dtsi" + +/ { + model = "ZII SCU2 Mezz Board"; + compatible = "zii,imx51-scu2-mezz", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + /* Will be filled by the bootloader */ + memory@90000000 { + reg = <0x90000000 0>; + }; + + aliases { + mdio-gpio0 = &mdio_gpio; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_mmc_reset>; + gpio = <&gpio3 13 GPIO_ACTIVE_LOW>; + startup-delay-us = <150000>; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + mdio_gpio: mdio-gpio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_swmdio>; + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>, /* mdc */ + <&gpio2 6 GPIO_ACTIVE_HIGH>; /* mdio */ + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "port4"; + }; + + port@1 { + reg = <1>; + label = "port5"; + }; + + port@2 { + reg = <2>; + label = "port6"; + }; + + port@3 { + reg = <3>; + label = "port7"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "mezz2esb"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled3: led3@3 { + reg = <3>; + label = "system:red:power"; + linux,default-trigger = "default-on"; + }; + + sysled4: led4@4 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + compatible = "atmel,at45", "atmel,dataflash"; + reg = <1>; + spi-max-frequency = <25000000>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc4>; + bus-width = <4>; + no-1-8-v; + no-sdio; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + status = "okay"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-supply = <&vgen3_reg>; + phy-handle = <ðphy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + max-speed = <100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-mezz"; + current-speed = <57600>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog-legacy"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <&usb_vbus>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb2_reg>; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5 + MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5 + MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5 + MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5 + >; + }; + + pinctrl_esdhc4: esdhc4grp { + fsl,pins = < + MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5 + MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5 + MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5 + MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5 + MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5 + MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5 + MX51_PAD_NANDF_D0__GPIO4_8 0x100 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x2004 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x2004 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x2004 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x2004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 + MX51_PAD_DISP2_DAT10__FEC_COL 0x0180 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x0180 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x20a4 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x20a4 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 + MX51_PAD_DI_GP3__FEC_TX_ER 0x2004 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x2180 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x0085 + MX51_PAD_DI_GP4__FEC_RDATA2 0x0085 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x0085 + MX51_PAD_DI2_PIN2__FEC_MDC 0x2004 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x01f5 + MX51_PAD_DI2_PIN4__FEC_CRS 0x0180 + MX51_PAD_EIM_A20__GPIO2_14 0x0085 + MX51_PAD_EIM_A21__GPIO2_15 0x00e5 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x85 + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 + >; + }; + + pinctrl_swmdio: swmdiogrp { + fsl,pins = < + MX51_PAD_EIM_D22__GPIO2_6 0x100 + MX51_PAD_EIM_D23__GPIO2_7 0x100 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usb_mmc_reset: usbmmcgrp { + fsl,pins = < + MX51_PAD_CSI1_D9__GPIO3_13 0x85 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts new file mode 100644 index 000000000000..e6ebac8f43e4 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts @@ -0,0 +1,467 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx51.dtsi" + +/ { + model = "ZII SCU3 ESB board"; + compatible = "zii,imx51-scu3-esb", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + /* Will be filled by the bootloader */ + memory@90000000 { + reg = <0x90000000 0>; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_mmc_reset>; + gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; + startup-delay-us = <150000>; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled3: led3@3 { + reg = <3>; + label = "system:red:power"; + linux,default-trigger = "default-on"; + }; + + sysled4: led4@4 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc4>; + bus-width = <4>; + no-1-8-v; + no-sdio; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + fec_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio4>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "port1"; + }; + + port@1 { + reg = <1>; + label = "port2"; + }; + + port@2 { + reg = <2>; + label = "port3"; + }; + + port@3 { + reg = <3>; + label = "scu2scu"; + }; + + port@4 { + reg = <4>; + label = "esb2host"; + }; + + port@5 { + reg = <5>; + label = "esb2mezz"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + phy-mode = "mii"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&ipu { + status = "disabled"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-esb"; + current-speed = <57600>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog-legacy"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <&usb_vbus>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb2_reg>; +}; + +&wdog1 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5 + MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5 + MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5 + MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5 + >; + }; + + pinctrl_esdhc4: esdhc4grp { + fsl,pins = < + MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5 + MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5 + MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5 + MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5 + MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5 + MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5 + MX51_PAD_NANDF_D0__GPIO4_8 0x100 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x2004 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x2004 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x2004 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x2004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 + MX51_PAD_DISP2_DAT10__FEC_COL 0x0180 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x0180 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x20a4 + + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x2180 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x0085 + MX51_PAD_DI_GP4__FEC_RDATA2 0x0085 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x0085 + MX51_PAD_DI2_PIN2__FEC_MDC 0x2004 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x01f5 + MX51_PAD_DI2_PIN4__FEC_CRS 0x0180 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x85 + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 + >; + }; + + pinctrl_switch: switchgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_CK__GPIO4_20 0xc5 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 + MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + MX51_PAD_USBH1_DATA0__UART2_CTS 0x1c5 + MX51_PAD_USBH1_DATA3__UART2_RTS 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usb_mmc_reset: usbmmcgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_RXD__GPIO4_19 0x100 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index fe01b890c715..5c4ba91e43ba 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -93,18 +93,17 @@ }; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; + pmu: pmu { + compatible = "arm,cortex-a8-pmu"; + interrupt-parent = <&tzic>; + interrupts = <77>; + }; - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX5_CLK_USB_PHY_GATE>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + usbphy0: usbphy0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; }; display-subsystem { @@ -250,6 +249,11 @@ }; }; + aipstz1: bridge@73f00000 { + compatible = "fsl,imx51-aipstz"; + reg = <0x73f00000 0x60>; + }; + usbotg: usb@73f80000 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80000 0x0200>; @@ -435,6 +439,11 @@ reg = <0x80000000 0x10000000>; ranges; + aipstz2: bridge@83f00000 { + compatible = "fsl,imx51-aipstz"; + reg = <0x83f00000 0x60>; + }; + iim: iim@83f98000 { compatible = "fsl,imx51-iim", "fsl,imx27-iim"; reg = <0x83f98000 0x4000>; @@ -442,6 +451,11 @@ clocks = <&clks IMX5_CLK_IIM_GATE>; }; + tigerp: tigerp@83fa0000 { + compatible = "fsl,imx51-tigerp"; + reg = <0x83fa0000 0x28>; + }; + owire: owire@83fa4000 { compatible = "fsl,imx51-owire", "fsl,imx21-owire"; reg = <0x83fa4000 0x4000>; @@ -528,6 +542,11 @@ status = "disabled"; }; + m4if: m4if@83fd8000 { + compatible = "fsl,imx51-m4if"; + reg = <0x83fd8000 0x1000>; + }; + weim: weim@83fda000 { #address-cells = <2>; #size-cells = <1>; @@ -588,6 +607,26 @@ clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; + + vpu@83ff4000 { + compatible = "fsl,imx51-vpu", "cnm,codahx4"; + reg = <0x83ff4000 0x1000>; + interrupts = <9>; + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, + <&clks IMX5_CLK_VPU_GATE>; + clock-names = "per", "ahb"; + resets = <&src 1>; + iram = <&iram>; + }; + + sahara: crypto@83ff8000 { + compatible = "fsl,imx53-sahara", "fsl,imx51-sahara"; + reg = <0x83ff8000 0x4000>; + interrupts = <19 20>; + clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, + <&clks IMX5_CLK_SAHARA_IPG_GATE>; + clock-names = "ipg", "ahb"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts new file mode 100644 index 000000000000..0e7f071fd10e --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp-ddc.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-kp.dtsi" + +/ { + model = "K+P imx53 DDC"; + compatible = "kiebackpeter,imx53-ddc", "fsl,imx53"; + + backlight_lcd: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000>; + power-supply = <®_backlight>; + brightness-levels = <0 24 28 32 36 + 40 44 48 52 56 + 60 64 68 72 76 + 80 84 88 92 96 100>; + default-brightness-level = <20>; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp>; + + port@0 { + reg = <0>; + + display1_in: endpoint { + remote-endpoint = <&ipu_di1_disp1>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel: lcd-panel { + compatible = "koe,tx14d24vm1bpa"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_backlight: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "backlight-supply"; + regulator-min-microvolt = <15000000>; + regulator-max-microvolt = <15000000>; + regulator-always-on; + }; +}; + +&fec { + status = "okay"; +}; + +&i2c3 { + adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <2>; + ti,datarate = <4>; + }; + + channel@6 { + reg = <6>; + ti,gain = <2>; + ti,datarate = <4>; + }; + }; + + gpio-expander2@21 { + compatible = "nxp,pcf8574"; + reg = <0x21>; + interrupts = <109>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&iomuxc { + imx53-kp-ddc { + pinctrl_disp: dispgrp { + fsl,pins = < + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x4 + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x4 + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x4 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x4 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x4 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x4 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x4 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x4 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x4 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x4 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x4 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x4 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x4 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x4 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x4 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x4 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x4 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x4 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x4 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x4 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x4 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x4 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x4 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x4 + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x4 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x4 + MX53_PAD_GPIO_1__PWM2_PWMO 0x4 + >; + }; + }; +}; + +&ipu_di1_disp1 { + remote-endpoint = <&display1_in>; +}; + +&pmic { + fsl,mc13xxx-uses-touch; +}; diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/imx53-kp-hsc.dts new file mode 100644 index 000000000000..6e3d71baac0f --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp-hsc.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-kp.dtsi" + +/ { + model = "K+P imx53 HSC"; + compatible = "kiebackpeter,imx53-hsc", "fsl,imx53"; +}; + +&fec { + status = "okay"; + + fixed-link { /* RMII fixed link to LAN9303 */ + speed = <100>; + full-duplex; + }; +}; + +&i2c3 { + switch: switch@a { + compatible = "smsc,lan9303-i2c"; + reg = <0xa>; + reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + reset-duration = <400>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { /* RMII fixed link to master */ + reg = <0>; + label = "cpu"; + ethernet = <&fec>; + }; + + port@1 { /* external port 1 */ + reg = <1>; + label = "lan1"; + }; + + port@2 { /* external port 2 */ + reg = <2>; + label = "lan2"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi new file mode 100644 index 000000000000..8b25416a5303 --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-tqma53.dtsi" +#include <dt-bindings/input/input.h> + +/ { + buzzer { + compatible = "pwm-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buzzer>; + pwms = <&pwm1 0 500000>; + }; + + gpio-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobuttons>; + + button-kalt { + label = "Kaltstart"; + linux,code = <KEY_F6>; + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + }; + + button-pwr { + label = "PowerFailInterrupt"; + linux,code = <KEY_F7>; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-bus { + label = "bus"; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + led-error { + label = "error"; + gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + led-flash { + label = "flash"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + gpio-expander1@22 { + compatible = "nxp,pcf8574"; + reg = <0x22>; + interrupts = <109>; + #gpio-cells = <2>; + gpio-controller; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kp_common>; + + imx53-kp-common { + pinctrl_buzzer: buzzergrp { + fsl,pins = < + MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4 + >; + }; + + pinctrl_gpiobuttons: gpiobuttonsgrp { + fsl,pins = < + MX53_PAD_EIM_RW__GPIO2_26 0x1e4 + MX53_PAD_EIM_D22__GPIO3_22 0x1e4 + >; + }; + + pinctrl_kp_common: kpcommongrp { + fsl,pins = < + MX53_PAD_EIM_CS0__GPIO2_23 0x1e4 + MX53_PAD_GPIO_19__GPIO4_5 0x1e4 + MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4 + MX53_PAD_PATA_DATA7__GPIO2_7 0xe0 + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4 + MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4 + MX53_PAD_EIM_D17__GPIO3_17 0x1e4 + MX53_PAD_EIM_D18__GPIO3_18 0x1e4 + MX53_PAD_EIM_D21__GPIO3_21 0x1e4 + MX53_PAD_EIM_D29__GPIO3_29 0x1e4 + MX53_PAD_EIM_DA11__GPIO3_11 0x1e4 + MX53_PAD_EIM_DA13__GPIO3_13 0x1e4 + MX53_PAD_EIM_DA14__GPIO3_14 0x1e4 + MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4 + MX53_PAD_SD1_CMD__GPIO1_18 0x1e4 + MX53_PAD_SD1_CLK__GPIO1_20 0x1e4 + >; + }; + + pinctrl_leds: ledgrp { + fsl,pins = < + MX53_PAD_EIM_EB2__GPIO2_30 0x1d4 + MX53_PAD_EIM_D28__GPIO3_28 0x1d4 + MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4 + >; + }; + }; +}; + +&pinctrl_uart1 { + fsl,pins = < + MX53_PAD_EIM_D23__GPIO3_23 0x1e4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1e4 + MX53_PAD_EIM_D24__GPIO3_24 0x1e4 + MX53_PAD_EIM_D25__GPIO3_25 0x1e4 + MX53_PAD_EIM_D19__GPIO3_19 0x1e4 + MX53_PAD_EIM_D20__GPIO3_20 0x1e4 + >; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy0 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index 3aa6f693fa9f..cdb90bee7b4a 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -140,6 +140,25 @@ regulator-always-on; }; + reg_3v3: regulator-3v3 { + /* TPS54320 */ + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_3v3_lcd: regulator-3v3-lcd { + /* MIC2009 */ + compatible = "regulator-fixed"; + regulator-name = "LCD_3V3"; + vin-supply = <®_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + pwm_bl: backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; @@ -154,6 +173,7 @@ 234 237 239 242 244 247 249 252 255>; default-brightness-level = <0>; enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3_lcd>; }; leds { @@ -198,8 +218,9 @@ }; }; - usbphy2: usbphy2 { + usbphy2: usbphy-2 { compatible = "usb-nop-xceiv"; + vcc-supply = <®_3v3>; reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; clock-names = "main_clk"; clock-frequency = <24000000>; @@ -208,8 +229,9 @@ assigned-clock-parents = <&clks IMX5_CLK_OSC>; }; - usbphy3: usbphy3 { + usbphy3: usbphy-3 { compatible = "usb-nop-xceiv"; + vcc-supply = <®_3v3>; reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; clock-names = "main_clk"; @@ -221,6 +243,7 @@ panel-lvds0 { compatible = "nvd,9128"; + power-supply = <®_3v3_lcd>; port { panel_in_lvds0: endpoint { @@ -230,6 +253,14 @@ }; }; +&usbphy0 { + vcc-supply = <®_3v3>; +}; + +&usbphy1 { + vcc-supply = <®_3v3>; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -414,6 +445,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; + phy-supply = <®_3v3>; phy-mode = "rmii"; phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; status = "okay"; @@ -562,6 +594,10 @@ }; }; +&pmu { + secure-reg-access; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index ef7658a78836..7423d462d1e4 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -153,7 +153,6 @@ imx53-qsb { pinctrl_hog: hoggrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 MX53_PAD_GPIO_8__GPIO1_8 0x80000000 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 @@ -180,6 +179,12 @@ >; }; + pinctrl_codec: codecgrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 @@ -310,6 +315,8 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec>; #sound-dai-cells = <0>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 1a7a7bb3df45..6386185ae234 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -113,7 +113,7 @@ }; }; - pmu { + pmu: pmu { compatible = "arm,cortex-a8-pmu"; interrupt-parent = <&tzic>; interrupts = <77>; @@ -672,6 +672,11 @@ status = "disabled"; }; + tigerp: tigerp@63fa0000 { + compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp"; + reg = <0x63fa0000 0x28>; + }; + owire: owire@63fa4000 { compatible = "fsl,imx53-owire", "fsl,imx21-owire"; reg = <0x63fa4000 0x4000>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 3dee3af1a4c1..9de45a717356 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -221,9 +221,6 @@ /* Colibri MMC */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc_cd>; - cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts new file mode 100644 index 000000000000..bf53f0552aa1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Engicam S.r.l. + * Copyright (C) 2018 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6dl"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts index 6b2d29138bed..df8607fe4142 100644 --- a/arch/arm/boot/dts/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -6,11 +6,156 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6dl.dtsi" / { model = "BTicino i.MX6DL Mamoj board"; compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; + + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */ + brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>; + default-brightness-level = <7>; + }; + + display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel-lcd { + compatible = "rocktech,rk070er9427"; + backlight = <&backlight_lcd>; + power-supply = <®_lcd_lr>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_lcd_3v3: regulator-lcd-dvdd { + compatible = "regulator-fixed"; + regulator-name = "lcd-dvdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 1 0>; + enable-active-high; + startup-delay-us = <21000>; + }; + + reg_lcd_power: regulator-lcd-power { + compatible = "regulator-fixed"; + regulator-name = "lcd-enable"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 6 0>; + enable-active-high; + vin-supply = <®_lcd_3v3>; + }; + + reg_lcd_vgl: regulator-lcd-vgl { + compatible = "regulator-fixed"; + regulator-name = "lcd-vgl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_power>; + }; + + reg_lcd_vgh: regulator-lcd-vgh { + compatible = "regulator-fixed"; + regulator-name = "lcd-vgh"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_avdd>; + }; + + reg_lcd_vcom: regulator-lcd-vcom { + compatible = "regulator-fixed"; + regulator-name = "lcd-vcom"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>; + startup-delay-us = <11000>; + enable-active-high; + vin-supply = <®_lcd_vgh>; + }; + + reg_lcd_lr: regulator-lcd-lr { + compatible = "regulator-fixed"; + regulator-name = "lcd-lr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_lcd_vcom>; + }; + + reg_lcd_avdd: regulator-lcd-avdd { + compatible = "regulator-fixed"; + regulator-name = "lcd-avdd"; + regulator-min-microvolt = <10280000>; + regulator-max-microvolt = <10280000>; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_vgl>; + }; + + reg_usb_host: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbhost-vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhost>; + regulator-min-microvolt = <50000000>; + regulator-max-microvolt = <50000000>; + gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wl18xx_vmmc: regulator-wl18xx-vmcc { + compatible = "regulator-fixed"; + regulator-name = "vwl1807"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &fec { @@ -147,12 +292,56 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; +&usbh1 { + vbus-supply = <®_usb_host>; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + vmmc-supply = <®_wl18xx_vmmc>; + no-1-8-v; + non-removable; + wakeup-source; + keep-power-in-suspend; + cap-power-off-card; + max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -200,6 +389,59 @@ >; }; + pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */ + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */ + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 /* VDOUT_HSYNC */ + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 /* VDOUT_VSYNC */ + MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10 /* VDOUT_RESET */ + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x40013058 /* EN_LCD33V */ + MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x4001b0b0 /* EN_AVDD */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x40013058 /* ENVGH */ + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x40013058 /* ENVGL */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x40013058 /* LCD_POWER */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x40013058 /* EN_VCOM_LCD */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x40013058 /* LCD_L_R */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x40013058 /* LCD_U_D */ + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 @@ -207,6 +449,23 @@ >; }; + pinctrl_usbhost: usbhostgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10079 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -221,4 +480,10 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x4001b0b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts index 30ce2c0cec2b..61fa30991d67 100644 --- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index ec53d7a09572..ef58d3b0ea0d 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 2e98c92adff7..dd3226fe5ecd 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -19,36 +19,8 @@ reg = <0x10000000 0x40000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; + chosen { + stdout-path = "serial1:115200n8"; }; leds { @@ -82,6 +54,28 @@ mux-int-port = <1>; mux-ext-port = <3>; }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; }; &audmux { diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index b384913c34dd..f0607eb41df4 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -33,6 +33,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -50,6 +51,29 @@ device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index aa0e631f3c0a..707ac9a46115 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -62,6 +62,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -109,6 +113,7 @@ */ compatible = "edt,et057090dhu"; backlight = <&backlight>; + power-supply = <®_3v3_sw>; port { lcd_panel_in: endpoint { @@ -127,19 +132,30 @@ enable-active-high; status = "okay"; }; + + reg_3v3_sw: regulator-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &backlight { brightness-levels = <0 127 191 223 239 247 251 255>; default-brightness-level = <1>; + power-supply = <®_3v3_sw>; status = "okay"; }; &can1 { + xceiver-supply = <®_3v3_sw>; status = "okay"; }; &can2 { + xceiver-supply = <®_3v3_sw>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index e8dccf552122..4e1c8feaef82 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -63,6 +63,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 6831dfd24cc1..469e3d0e2827 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -62,6 +62,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 65ef4cacbc71..18ae4f3be6e3 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -187,6 +187,72 @@ >; }; +&cpu1 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu2 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu3 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + &ecspi1 { cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts index acd3d33476d4..95b2efda17b4 100644 --- a/arch/arm/boot/dts/imx6q-icore-mipi.dts +++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts @@ -20,6 +20,14 @@ status = "okay"; }; +&mipi_csi { + status = "okay"; +}; + +&ov5640 { + status = "okay"; +}; + &usdhc3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts index 2a3c44f98eed..03bec0c53063 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts index c5d59baa1a07..eb4eecb6ed22 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index df8ff397a914..435445a34ad0 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index f2368a073d07..c54362fcc508 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -177,6 +177,7 @@ touchscreen-size-y = <480>; touchscreen-inverted-x; touchscreen-inverted-y; + wakeup-source; }; rtc@68 { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 77f8f030dd07..0193ee6fe964 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -38,6 +38,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -50,25 +51,106 @@ soc-supply = <®_soc>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 64fbee61de44..05f07ea3e8c8 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -61,25 +61,17 @@ status = "disabled"; }; - reg_1p8v: regulator-1p8v { + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; - reg_3p3v: regulator-3p3v { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "3P3V"; + regulator-name = "+V3.3_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -297,7 +289,7 @@ vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -322,8 +314,9 @@ compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; + VDDA-supply = <®_module_3v3_audio>; + VDDIO-supply = <®_module_3v3>; + VDDD-supply = <&vgen4_reg>; }; /* STMPE811 touch screen controller */ @@ -455,9 +448,10 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + disable-wp; + no-1-8-v; status = "disabled"; }; @@ -465,9 +459,10 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <4>; - voltage-ranges = <3300 3300>; + disable-wp; + no-1-8-v; status = "disabled"; }; @@ -475,9 +470,9 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + no-1-8-v; non-removable; status = "okay"; }; @@ -952,38 +947,4 @@ MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 >; }; - - pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 76035db96f67..87e15e7cb32b 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -56,25 +56,17 @@ status = "disabled"; }; - reg_1p8v: regulator-1p8v { + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; - reg_3p3v: regulator-3p3v { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "3P3V"; + regulator-name = "+V3.3_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -227,7 +219,7 @@ vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -252,8 +244,9 @@ compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; + VDDA-supply = <®_module_3v3_audio>; + VDDIO-supply = <®_module_3v3>; + VDDD-supply = <&vgen4_reg>; lrclk-strength = <3>; }; @@ -385,10 +378,12 @@ /* Colibri MMC */ &usdhc1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - vqmmc-supply = <®_3p3v>; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ + disable-wp; + vqmmc-supply = <®_module_3v3>; bus-width = <4>; - voltage-ranges = <3300 3300>; + no-1-8-v; status = "disabled"; }; @@ -396,9 +391,9 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + no-1-8-v; non-removable; status = "okay"; }; @@ -479,8 +474,7 @@ pinctrl_gpio_keys: gpiokeys { fsl,pins = < - /* Power button */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 >; }; @@ -567,7 +561,7 @@ pinctrl_mmc_cd: gpiommccd { fsl,pins = < - MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1 >; }; @@ -698,40 +692,6 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 - >; - }; - pinctrl_weim_cs0: weimcs0grp { fsl,pins = < /* nEXT_CS0 */ diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 0a1574998fc6..9ce993776160 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -65,8 +65,7 @@ regulator-always-on; }; - - reg_2p5v: regulator-3p3v { + reg_2p5v: regulator-2p5v { compatible = "regulator-fixed"; regulator-name = "2P5V"; regulator-min-microvolt = <2500000>; @@ -215,6 +214,29 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <®_1p8v>; + AVDD-supply = <®_3p3v>; + DVDD-supply = <®_3p3v>; + powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; + status = "disabled"; + + port { + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + sgtl5000: codec@a { #sound-dai-cells = <0>; compatible = "fsl,sgtl5000"; @@ -226,6 +248,20 @@ }; }; +&mipi_csi { + status = "disabled"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; @@ -353,7 +389,14 @@ fsl,pins = < MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index aab088f318e8..29baf25ae5d0 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -292,6 +256,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; rtc@6f { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 87ca6ead4098..39200e5dc896 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -442,6 +406,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index f5b763d39285..572abd7499b1 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -360,6 +324,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 596866b0a0d2..98384a6c5d12 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -370,6 +334,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 0e28e36ddbb2..9f11f1fcc3e6 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -6,6 +6,10 @@ #include <dt-bindings/gpio/gpio.h> / { + chosen { + stdout-path = &uart4; + }; + memory@10000000 { reg = <0x10000000 0x80000000>; }; @@ -155,6 +159,27 @@ gpio-controller; #gpio-cells = <2>; }; + + light-sensor@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + interrupt-parent = <&gpio5>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + }; + + magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + }; + + accelerometer@1c { + compatible = "fsl,mma8451"; + reg = <0x1c>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 15744ad52535..6e46a195b399 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -341,6 +341,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index e1afa54404d0..381bf61fcd28 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -8,30 +8,6 @@ #include <dt-bindings/gpio/gpio.h> / { - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - sound { compatible = "fsl,imx6-wandboard-sgtl5000", "fsl,imx-audio-sgtl5000"; @@ -52,6 +28,32 @@ spdif-controller = <&spdif>; spdif-out; }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgvbus>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; }; &audmux { @@ -174,6 +176,12 @@ >; }; + pinctrl_usbotgvbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 @@ -248,10 +256,11 @@ }; &usbotg { + vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "peripheral"; + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index f14df0baf2ab..7fff3717cf7c 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -320,10 +320,36 @@ rave-sp { compatible = "zii,rave-sp-rdu2"; current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; watchdog { compatible = "zii,rave-sp-watchdog"; }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; }; }; @@ -569,14 +595,14 @@ rmi4-f11@11 { reg = <0x11>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; rmi4-f12@12 { reg = <0x12>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 911141e24681..61d2d26afbf4 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -922,7 +922,6 @@ crypto: caam@2100000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <4>; #address-cells = <1>; #size-cells = <1>; reg = <0x2100000 0x10000>; diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts index a39b86036581..741d1ed338ca 100644 --- a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts index 011726c836cd..1593ac86b2a4 100644 --- a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts +++ b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2017 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 92ad01f676e3..679b4482ab13 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -12,6 +12,10 @@ model = "Freescale i.MX6 SoloLite EVK Board"; compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + chosen { + stdout-path = &uart1; + }; + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -73,6 +77,8 @@ reg_lcd_3v3: regulator-lcd-3v3 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; regulator-name = "lcd-3v3"; gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; enable-active-high; @@ -195,6 +201,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { @@ -406,6 +413,12 @@ >; }; + pinctrl_reg_lcd_3v3: reglcd3v3grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 994e48dc1df0..7a4f5dace902 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -60,6 +60,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>, <&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>, <&clks IMX6SL_CLK_PLL1_SYS>; @@ -523,8 +524,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -553,8 +554,8 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2850000>; + regulator-min-microvolt = <2250000>; + regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; @@ -680,10 +681,36 @@ #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; - pu-supply = <®_pu>; - clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, - <&clks IMX6SL_CLK_GPU2D_PODF>; - #power-domain-cells = <1>; + clocks = <&clks IMX6SL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, + <&clks IMX6SL_CLK_GPU2D_PODF>; + }; + + pd_disp: power-domain@2 { + reg = <2>; + #power-domain-cells = <0>; + clocks = <&clks IMX6SL_CLK_LCDIF_AXI>, + <&clks IMX6SL_CLK_LCDIF_PIX>, + <&clks IMX6SL_CLK_EPDC_AXI>, + <&clks IMX6SL_CLK_EPDC_PIX>, + <&clks IMX6SL_CLK_PXP_AXI>; + }; + }; }; gpr: iomuxc-gpr@20e0000 { @@ -738,6 +765,7 @@ <&clks IMX6SL_CLK_DUMMY>; clock-names = "pix", "axi", "disp_axi"; status = "disabled"; + power-domains = <&pd_disp>; }; dcp: dcp@20fc000 { @@ -921,5 +949,25 @@ status = "disabled"; }; }; + + gpu_2d: gpu@2200000 { + compatible = "vivante,gc"; + reg = <0x02200000 0x4000>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_MMDC_ROOT>, + <&clks IMX6SL_CLK_GPU2D_OVG>; + clock-names = "bus", "core"; + power-domains = <&pd_pu>; + }; + + gpu_vg: gpu@2204000 { + compatible = "vivante,gc"; + reg = <0x02204000 0x4000>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_MMDC_ROOT>, + <&clks IMX6SL_CLK_GPU2D_OVG>; + clock-names = "bus", "core"; + power-domains = <&pd_pu>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts new file mode 100644 index 000000000000..c8e115564ba2 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sll.dtsi" + +/ { + model = "Freescale i.MX6SLL EVK Board"; + compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x80000000>; + }; + + backlight_display: backlight-display { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2_vbus>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_aud3v: regulator-aud3v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator-aud4v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sd1_vmmc>; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sd3_vmmc: regulator-sd3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sd3_vmmc>; + regulator-name = "SD3_WIFI"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <®_sd3_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_reg_sd3_vmmc: sd3vmmcgrp { + fsl,pins = < + MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 + >; + }; + + pinctrl_usb_otg1_vbus: vbus1grp { + fsl,pins = < + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 + >; + }; + + pinctrl_usb_otg2_vbus: vbus2grp { + fsl,pins = < + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 + >; + }; + + pinctrl_reg_lcd_3v3: reglcd3v3grp { + fsl,pins = < + MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 + >; + }; + + pinctrl_reg_sd1_vmmc: sd1vmmcgrp { + fsl,pins = < + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17061 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13061 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17061 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17061 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17061 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17061 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170a1 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130a1 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170a1 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170a1 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170a1 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170a1 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170e9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170e9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170e9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170e9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170e9 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 + MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79 + MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79 + MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79 + MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79 + MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79 + MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79 + MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79 + MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79 + MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79 + MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79 + MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; + + pinctrl_pwm1: pmw1grp { + fsl,pins = < + MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/imx6sll-pinfunc.h new file mode 100644 index 000000000000..713a346f4c89 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-pinfunc.h @@ -0,0 +1,880 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +#ifndef __DTS_IMX6SLL_PINFUNC_H +#define __DTS_IMX6SLL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6SLL_PAD_WDOG_B__WDOG1_B 0x0014 0x02DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x0014 0x02DC 0x0000 0x1 0x0 +#define MX6SLL_PAD_WDOG_B__UART5_RI_B 0x0014 0x02DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_WDOG_B__GPIO3_IO18 0x0014 0x02DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x0018 0x02E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x0018 0x02E0 0x068C 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT 0x0018 0x02E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID 0x0018 0x02E0 0x0560 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x0018 0x02E0 0x05AC 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x0018 0x02E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__SD3_WP 0x0018 0x02E0 0x0794 0x6 0x0 +#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x001C 0x02E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x001C 0x02E4 0x0690 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT 0x001C 0x02E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID 0x001C 0x02E4 0x055C 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL 0x001C 0x02E4 0x0000 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x001C 0x02E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B 0x001C 0x02E4 0x0780 0x6 0x0 +#define MX6SLL_PAD_PWM1__PWM1_OUT 0x0020 0x02E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_PWM1__CCM_CLKO 0x0020 0x02E8 0x0000 0x1 0x0 +#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT 0x0020 0x02E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_PWM1__CSI_MCLK 0x0020 0x02E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_PWM1__GPIO3_IO23 0x0020 0x02E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_PWM1__EPIT1_OUT 0x0020 0x02E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL0__KEY_COL0 0x0024 0x02EC 0x06A0 0x0 0x0 +#define MX6SLL_PAD_KEY_COL0__I2C2_SCL 0x0024 0x02EC 0x0684 0x1 0x0 +#define MX6SLL_PAD_KEY_COL0__LCD_DATA00 0x0024 0x02EC 0x06D8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL0__SD1_CD_B 0x0024 0x02EC 0x0770 0x4 0x1 +#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24 0x0024 0x02EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0 0x0028 0x02F0 0x06C0 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA 0x0028 0x02F0 0x0688 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01 0x0028 0x02F0 0x06DC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW0__SD1_WP 0x0028 0x02F0 0x0774 0x4 0x1 +#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25 0x0028 0x02F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL1__KEY_COL1 0x002C 0x02F4 0x06A4 0x0 0x0 +#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI 0x002C 0x02F4 0x0658 0x1 0x1 +#define MX6SLL_PAD_KEY_COL1__LCD_DATA02 0x002C 0x02F4 0x06E0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL1__SD3_DATA4 0x002C 0x02F4 0x0784 0x4 0x0 +#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26 0x002C 0x02F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1 0x0030 0x02F8 0x06C4 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO 0x0030 0x02F8 0x0654 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03 0x0030 0x02F8 0x06E4 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD 0x0030 0x02F8 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5 0x0030 0x02F8 0x0788 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x0030 0x02F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL2__KEY_COL2 0x0034 0x02FC 0x06A8 0x0 0x0 +#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0 0x0034 0x02FC 0x065C 0x1 0x1 +#define MX6SLL_PAD_KEY_COL2__LCD_DATA04 0x0034 0x02FC 0x06E8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL2__CSI_DATA12 0x0034 0x02FC 0x05B8 0x3 0x1 +#define MX6SLL_PAD_KEY_COL2__SD3_DATA6 0x0034 0x02FC 0x078C 0x4 0x0 +#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x0034 0x02FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2 0x0038 0x0300 0x06C8 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK 0x0038 0x0300 0x0650 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05 0x0038 0x0300 0x06EC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13 0x0038 0x0300 0x05BC 0x3 0x1 +#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7 0x0038 0x0300 0x0790 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29 0x0038 0x0300 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__KEY_COL3 0x003C 0x0304 0x06AC 0x0 0x0 +#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS 0x003C 0x0304 0x05A0 0x1 0x1 +#define MX6SLL_PAD_KEY_COL3__LCD_DATA06 0x003C 0x0304 0x06F0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL3__CSI_DATA14 0x003C 0x0304 0x05C0 0x3 0x1 +#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x003C 0x0304 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__SD1_RESET 0x003C 0x0304 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3 0x0040 0x0308 0x06CC 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC 0x0040 0x0308 0x059C 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07 0x0040 0x0308 0x06F4 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15 0x0040 0x0308 0x05C4 0x3 0x2 +#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31 0x0040 0x0308 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT 0x0040 0x0308 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL4__KEY_COL4 0x0044 0x030C 0x06B0 0x0 0x1 +#define MX6SLL_PAD_KEY_COL4__AUD6_RXD 0x0044 0x030C 0x0594 0x1 0x1 +#define MX6SLL_PAD_KEY_COL4__LCD_DATA08 0x0044 0x030C 0x06F8 0x2 0x1 +#define MX6SLL_PAD_KEY_COL4__CSI_DATA16 0x0044 0x030C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x0044 0x030C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR 0x0044 0x030C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4 0x0048 0x0310 0x06D0 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC 0x0048 0x0310 0x05A4 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09 0x0048 0x0310 0x06FC 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17 0x0048 0x0310 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01 0x0048 0x0310 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC 0x0048 0x0310 0x076C 0x6 0x2 +#define MX6SLL_PAD_KEY_COL5__KEY_COL5 0x004C 0x0314 0x0694 0x0 0x1 +#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS 0x004C 0x0314 0x05A8 0x1 0x1 +#define MX6SLL_PAD_KEY_COL5__LCD_DATA10 0x004C 0x0314 0x0700 0x2 0x0 +#define MX6SLL_PAD_KEY_COL5__CSI_DATA18 0x004C 0x0314 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x004C 0x0314 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR 0x004C 0x0314 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5 0x0050 0x0318 0x06B4 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD 0x0050 0x0318 0x0598 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11 0x0050 0x0318 0x0704 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19 0x0050 0x0318 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x0050 0x0318 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC 0x0050 0x0318 0x0768 0x6 0x3 +#define MX6SLL_PAD_KEY_COL6__KEY_COL6 0x0054 0x031C 0x0698 0x0 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x0054 0x031C 0x075C 0x1 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX 0x0054 0x031C 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL6__LCD_DATA12 0x0054 0x031C 0x0708 0x2 0x1 +#define MX6SLL_PAD_KEY_COL6__CSI_DATA20 0x0054 0x031C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x0054 0x031C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL6__SD3_RESET 0x0054 0x031C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6 0x0058 0x0320 0x06B8 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x0058 0x0320 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX 0x0058 0x0320 0x075C 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13 0x0058 0x0320 0x070C 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21 0x0058 0x0320 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x0058 0x0320 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT 0x0058 0x0320 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL7__KEY_COL7 0x005C 0x0324 0x069C 0x0 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS 0x005C 0x0324 0x0758 0x1 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS 0x005C 0x0324 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL7__LCD_DATA14 0x005C 0x0324 0x0710 0x2 0x1 +#define MX6SLL_PAD_KEY_COL7__CSI_DATA22 0x005C 0x0324 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06 0x005C 0x0324 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL7__SD1_WP 0x005C 0x0324 0x0774 0x6 0x3 +#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7 0x0060 0x0328 0x06BC 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS 0x0060 0x0328 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS 0x0060 0x0328 0x0758 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15 0x0060 0x0328 0x0714 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23 0x0060 0x0328 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x0060 0x0328 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B 0x0060 0x0328 0x0770 0x6 0x3 +#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x0064 0x032C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI 0x0064 0x032C 0x0658 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24 0x0064 0x032C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00 0x0064 0x032C 0x05C8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07 0x0064 0x032C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x0068 0x0330 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO 0x0068 0x0330 0x0654 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25 0x0068 0x0330 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01 0x0068 0x0330 0x05CC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08 0x0068 0x0330 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x006C 0x0334 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0 0x006C 0x0334 0x065C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26 0x006C 0x0334 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x006C 0x0334 0x05D0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09 0x006C 0x0334 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x0070 0x0338 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK 0x0070 0x0338 0x0650 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27 0x0070 0x0338 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x0070 0x0338 0x05D4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10 0x0070 0x0338 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x0074 0x033C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1 0x0074 0x033C 0x0660 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28 0x0074 0x033C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x0074 0x033C 0x05D8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11 0x0074 0x033C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x0078 0x0340 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2 0x0078 0x0340 0x0664 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29 0x0078 0x0340 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x0078 0x0340 0x05DC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12 0x0078 0x0340 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x007C 0x0344 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3 0x007C 0x0344 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30 0x007C 0x0344 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x007C 0x0344 0x05E0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13 0x007C 0x0344 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x0080 0x0348 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY 0x0080 0x0348 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31 0x0080 0x0348 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x0080 0x0348 0x05E4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14 0x0080 0x0348 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x0084 0x034C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI 0x0084 0x034C 0x063C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0 0x0084 0x034C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15 0x0084 0x034C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x0088 0x0350 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO 0x0088 0x0350 0x0638 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1 0x0088 0x0350 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16 0x0088 0x0350 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x008C 0x0354 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0 0x008C 0x0354 0x0648 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2 0x008C 0x0354 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17 0x008C 0x0354 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x0090 0x0358 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK 0x0090 0x0358 0x0630 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3 0x0090 0x0358 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18 0x0090 0x0358 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x0094 0x035C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX 0x0094 0x035C 0x074C 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX 0x0094 0x035C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM 0x0094 0x035C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19 0x0094 0x035C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1 0x0094 0x035C 0x064C 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x0098 0x0360 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX 0x0098 0x0360 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX 0x0098 0x0360 0x074C 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ 0x0098 0x0360 0x0668 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20 0x0098 0x0360 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2 0x0098 0x0360 0x0640 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x009C 0x0364 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS 0x009C 0x0364 0x0748 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS 0x009C 0x0364 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT 0x009C 0x0364 0x066C 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21 0x009C 0x0364 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3 0x009C 0x0364 0x0644 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x00A0 0x0368 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS 0x00A0 0x0368 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS 0x00A0 0x0368 0x0748 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE 0x00A0 0x0368 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22 0x00A0 0x0368 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY 0x00A0 0x0368 0x0634 0x6 0x1 +#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x00A4 0x036C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x00A4 0x036C 0x0624 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL 0x00A4 0x036C 0x0684 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x00A4 0x036C 0x05E8 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23 0x00A4 0x036C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x00A8 0x0370 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO 0x00A8 0x0370 0x0620 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA 0x00A8 0x0370 0x0688 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x00A8 0x0370 0x05EC 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24 0x00A8 0x0370 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x00AC 0x0374 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0 0x00AC 0x0374 0x0628 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10 0x00AC 0x0374 0x05B0 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x00AC 0x0374 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x00B0 0x0378 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x00B0 0x0378 0x061C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x00B0 0x0378 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11 0x00B0 0x0378 0x05B4 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x00B0 0x0378 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x00B4 0x037C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x00B4 0x037C 0x062C 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT 0x00B4 0x037C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27 0x00B4 0x037C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x00B8 0x0380 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B 0x00B8 0x0380 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT 0x00B8 0x0380 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28 0x00B8 0x0380 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x00BC 0x0384 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL 0x00BC 0x0384 0x068C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT 0x00BC 0x0384 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29 0x00BC 0x0384 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x00C0 0x0388 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA 0x00C0 0x0388 0x0690 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT 0x00C0 0x0388 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30 0x00C0 0x0388 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x00C4 0x038C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x00C4 0x038C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x00C4 0x038C 0x05F4 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31 0x00C4 0x038C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET 0x00C4 0x038C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x00C8 0x0390 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3 0x00C8 0x0390 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x00C8 0x0390 0x05F0 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00 0x00C8 0x0390 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT 0x00C8 0x0390 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x00CC 0x0394 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY 0x00CC 0x0394 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x00CC 0x0394 0x0000 0x3 0x0 +#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01 0x00CC 0x0394 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDRL__SD2_WP 0x00CC 0x0394 0x077C 0x6 0x2 +#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x00D0 0x0398 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT 0x00D0 0x0398 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x00D0 0x0398 0x05F8 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02 0x00D0 0x0398 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B 0x00D0 0x0398 0x0778 0x6 0x2 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x00D4 0x039C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS 0x00D4 0x039C 0x0588 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX 0x00D4 0x039C 0x0754 0x2 0x4 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX 0x00D4 0x039C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x00D4 0x039C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x00D4 0x039C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x00D8 0x03A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD 0x00D8 0x03A0 0x057C 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX 0x00D8 0x03A0 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX 0x00D8 0x03A0 0x0754 0x2 0x5 +#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x00D8 0x03A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x00D8 0x03A0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0 0x00DC 0x03A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS 0x00DC 0x03A4 0x0750 0x2 0x2 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS 0x00DC 0x03A4 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05 0x00DC 0x03A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7 0x00DC 0x03A4 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1 0x00E0 0x03A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS 0x00E0 0x03A8 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS 0x00E0 0x03A8 0x0750 0x2 0x3 +#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06 0x00E0 0x03A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8 0x00E0 0x03A8 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0 0x00E4 0x03AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC 0x00E4 0x03AC 0x0584 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16 0x00E4 0x03AC 0x0718 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x00E4 0x03AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1 0x00E8 0x03B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS 0x00E8 0x03B0 0x0590 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17 0x00E8 0x03B0 0x071C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x00E8 0x03B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2 0x00EC 0x03B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD 0x00EC 0x03B4 0x0580 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18 0x00EC 0x03B4 0x0720 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 0x00EC 0x03B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3 0x00F0 0x03B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC 0x00F0 0x03B8 0x058C 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19 0x00F0 0x03B8 0x0724 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x00F0 0x03B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00F4 0x03BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20 0x00F4 0x03BC 0x0728 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x00F4 0x03BC 0x055C 0x4 0x4 +#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11 0x00F4 0x03BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET 0x00F4 0x03BC 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ 0x00F8 0x03C0 0x0668 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21 0x00F8 0x03C0 0x072C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID 0x00F8 0x03C0 0x0560 0x4 0x3 +#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x00F8 0x03C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT 0x00F8 0x03C0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00FC 0x03C4 0x066C 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22 0x00FC 0x03C4 0x0730 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI 0x00FC 0x03C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x00FC 0x03C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP 0x00FC 0x03C4 0x0794 0x6 0x2 +#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE 0x0100 0x03C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23 0x0100 0x03C8 0x0734 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO 0x0100 0x03C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x0100 0x03C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B 0x0100 0x03C8 0x0780 0x6 0x2 +#define MX6SLL_PAD_LCD_CLK__LCD_CLK 0x0104 0x03CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN 0x0104 0x03CC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_CLK__PWM4_OUT 0x0104 0x03CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x0104 0x03CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x0108 0x03D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E 0x0108 0x03D0 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x0108 0x03D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x010C 0x03D4 0x06D4 0x0 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_CS 0x010C 0x03D4 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX 0x010C 0x03D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX 0x010C 0x03D4 0x074C 0x4 0x1 +#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x010C 0x03D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x010C 0x03D4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x0110 0x03D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_RS 0x0110 0x03D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS 0x0110 0x03D8 0x0748 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS 0x0110 0x03D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x0110 0x03D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x0110 0x03D8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_RESET 0x0114 0x03DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_BUSY 0x0114 0x03DC 0x06D4 0x2 0x1 +#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS 0x0114 0x03DC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS 0x0114 0x03DC 0x0748 0x4 0x1 +#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x0114 0x03DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY 0x0114 0x03DC 0x05AC 0x6 0x2 +#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x0118 0x03E0 0x06D8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI 0x0118 0x03E0 0x0608 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID 0x0118 0x03E0 0x0560 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03E0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B 0x0118 0x03E0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x0118 0x03E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00 0x0118 0x03E0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00 0x0118 0x03E0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x011C 0x03E4 0x06DC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO 0x011C 0x03E4 0x0604 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID 0x011C 0x03E4 0x055C 0x2 0x3 +#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT 0x011C 0x03E4 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS 0x011C 0x03E4 0x0570 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x011C 0x03E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01 0x011C 0x03E4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01 0x011C 0x03E4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x0120 0x03E8 0x06E0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0 0x0120 0x03E8 0x0614 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT 0x0120 0x03E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03E8 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC 0x0120 0x03E8 0x056C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x0120 0x03E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02 0x0120 0x03E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02 0x0120 0x03E8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x0124 0x03EC 0x06E4 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK 0x0124 0x03EC 0x05FC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B 0x0124 0x03EC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03EC 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD 0x0124 0x03EC 0x0564 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x0124 0x03EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03 0x0124 0x03EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03 0x0124 0x03EC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x0128 0x03F0 0x06E8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1 0x0128 0x03F0 0x060C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC 0x0128 0x03F0 0x05F8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB 0x0128 0x03F0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC 0x0128 0x03F0 0x0574 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x0128 0x03F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04 0x0128 0x03F0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04 0x0128 0x03F0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x012C 0x03F4 0x06EC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2 0x012C 0x03F4 0x0610 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC 0x012C 0x03F4 0x05F0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS 0x012C 0x03F4 0x0578 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x012C 0x03F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05 0x012C 0x03F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05 0x012C 0x03F4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x0130 0x03F8 0x06F0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3 0x0130 0x03F8 0x0618 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK 0x0130 0x03F8 0x05F4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD 0x0130 0x03F8 0x0568 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x0130 0x03F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06 0x0130 0x03F8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06 0x0130 0x03F8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x0134 0x03FC 0x06F4 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY 0x0134 0x03FC 0x0600 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK 0x0134 0x03FC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT 0x0134 0x03FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x0134 0x03FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07 0x0134 0x03FC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07 0x0134 0x03FC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x0138 0x0400 0x06F8 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA08__KEY_COL0 0x0138 0x0400 0x06A0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09 0x0138 0x0400 0x05EC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK 0x0138 0x0400 0x061C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x0138 0x0400 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08 0x0138 0x0400 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08 0x0138 0x0400 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x013C 0x0404 0x06FC 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0 0x013C 0x0404 0x06C0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08 0x013C 0x0404 0x05E8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI 0x013C 0x0404 0x0624 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x013C 0x0404 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09 0x013C 0x0404 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09 0x013C 0x0404 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x0140 0x0408 0x0700 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA10__KEY_COL1 0x0140 0x0408 0x06A4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07 0x0140 0x0408 0x05E4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO 0x0140 0x0408 0x0620 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x0140 0x0408 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10 0x0140 0x0408 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x0140 0x0408 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x0144 0x040C 0x0704 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1 0x0144 0x040C 0x06C4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06 0x0144 0x040C 0x05E0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1 0x0144 0x040C 0x062C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x0144 0x040C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11 0x0144 0x040C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x0144 0x040C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x0148 0x0410 0x0708 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA12__KEY_COL2 0x0148 0x0410 0x06A8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05 0x0148 0x0410 0x05DC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS 0x0148 0x0410 0x0760 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS 0x0148 0x0410 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x0148 0x0410 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12 0x0148 0x0410 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x0148 0x0410 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x014C 0x0414 0x070C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2 0x014C 0x0414 0x06C8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04 0x014C 0x0414 0x05D8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS 0x014C 0x0414 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS 0x014C 0x0414 0x0760 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x014C 0x0414 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13 0x014C 0x0414 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x014C 0x0414 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x0150 0x0418 0x0710 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA14__KEY_COL3 0x0150 0x0418 0x06AC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03 0x0150 0x0418 0x05D4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX 0x0150 0x0418 0x0764 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX 0x0150 0x0418 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x0150 0x0418 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14 0x0150 0x0418 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0150 0x0418 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x0154 0x041C 0x0714 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3 0x0154 0x041C 0x06CC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02 0x0154 0x041C 0x05D0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX 0x0154 0x041C 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX 0x0154 0x041C 0x0764 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x0154 0x041C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15 0x0154 0x041C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0154 0x041C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x0158 0x0420 0x0718 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA16__KEY_COL4 0x0158 0x0420 0x06B0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x0420 0x05CC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL 0x0158 0x0420 0x0684 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x0158 0x0420 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24 0x0158 0x0420 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x015C 0x0424 0x071C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4 0x015C 0x0424 0x06D0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00 0x015C 0x0424 0x05C8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA 0x015C 0x0424 0x0688 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x015C 0x0424 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25 0x015C 0x0424 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x0160 0x0428 0x0720 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA18__KEY_COL5 0x0160 0x0428 0x0694 0x1 0x2 +#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15 0x0160 0x0428 0x05C4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1 0x0160 0x0428 0x0670 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x0160 0x0428 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26 0x0160 0x0428 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x0164 0x042C 0x0724 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5 0x0164 0x042C 0x06B4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14 0x0164 0x042C 0x05C0 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2 0x0164 0x042C 0x0674 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x0164 0x042C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27 0x0164 0x042C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x0168 0x0430 0x0728 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA20__KEY_COL6 0x0168 0x0430 0x0698 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13 0x0168 0x0430 0x05BC 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1 0x0168 0x0430 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x0168 0x0430 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28 0x0168 0x0430 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x016C 0x0434 0x072C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6 0x016C 0x0434 0x06B8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12 0x016C 0x0434 0x05B8 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2 0x016C 0x0434 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x016C 0x0434 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29 0x016C 0x0434 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x0170 0x0438 0x0730 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA22__KEY_COL7 0x0170 0x0438 0x069C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11 0x0170 0x0438 0x05B4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3 0x0170 0x0438 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x0170 0x0438 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30 0x0170 0x0438 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x0174 0x043C 0x0734 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7 0x0174 0x043C 0x06BC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10 0x0174 0x043C 0x05B0 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN 0x0174 0x043C 0x0678 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x0174 0x043C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31 0x0174 0x043C 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS 0x0178 0x0440 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL 0x0178 0x0440 0x067C 0x1 0x1 +#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX 0x0178 0x0440 0x0754 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX 0x0178 0x0440 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x0178 0x0440 0x068C 0x4 0x1 +#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00 0x0178 0x0440 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0 0x0178 0x0440 0x0648 0x6 0x0 +#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND 0x0178 0x0440 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXC__AUD3_RXC 0x017C 0x0444 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXC__I2C1_SDA 0x017C 0x0444 0x0680 0x1 0x1 +#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX 0x017C 0x0444 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX 0x017C 0x0444 0x0754 0x2 0x1 +#define MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x017C 0x0444 0x0690 0x4 0x1 +#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01 0x017C 0x0444 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1 0x017C 0x0444 0x064C 0x6 0x0 +#define MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x0180 0x0448 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI 0x0180 0x0448 0x063C 0x1 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX 0x0180 0x0448 0x075C 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX 0x0180 0x0448 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__SD1_LCTL 0x0180 0x0448 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02 0x0180 0x0448 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x0184 0x044C 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO 0x0184 0x044C 0x0638 0x1 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX 0x0184 0x044C 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX 0x0184 0x044C 0x075C 0x2 0x1 +#define MX6SLL_PAD_AUD_TXC__SD2_LCTL 0x0184 0x044C 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03 0x0184 0x044C 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x0188 0x0450 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT 0x0188 0x0450 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS 0x0188 0x0450 0x0758 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS 0x0188 0x0450 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL 0x0188 0x0450 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04 0x0188 0x0450 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x018C 0x0454 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK 0x018C 0x0454 0x0630 0x1 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS 0x018C 0x0454 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS 0x018C 0x0454 0x0758 0x2 0x1 +#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05 0x018C 0x0454 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x0190 0x0458 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT 0x0190 0x0458 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY 0x0190 0x0458 0x0634 0x2 0x0 +#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x0190 0x0458 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06 0x0190 0x0458 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x0190 0x0458 0x073C 0x6 0x1 +#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x0194 0x045C 0x0744 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX 0x0194 0x045C 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__PWM1_OUT 0x0194 0x045C 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX 0x0194 0x045C 0x075C 0x2 0x4 +#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX 0x0194 0x045C 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX 0x0194 0x045C 0x0764 0x4 0x6 +#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX 0x0194 0x045C 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16 0x0194 0x045C 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x0198 0x0460 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX 0x0198 0x0460 0x0744 0x0 0x1 +#define MX6SLL_PAD_UART1_TXD__PWM2_OUT 0x0198 0x0460 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX 0x0198 0x0460 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX 0x0198 0x0460 0x075C 0x2 0x5 +#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX 0x0198 0x0460 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX 0x0198 0x0460 0x0764 0x4 0x7 +#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17 0x0198 0x0460 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B 0x0198 0x0460 0x0000 0x7 0x0 +#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x019C 0x0464 0x067C 0x0 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS 0x019C 0x0464 0x0740 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS 0x019C 0x0464 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2 0x019C 0x0464 0x0640 0x2 0x0 +#define MX6SLL_PAD_I2C1_SCL__SD3_RESET 0x019C 0x0464 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12 0x019C 0x0464 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1 0x019C 0x0464 0x060C 0x6 0x0 +#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x01A0 0x0468 0x0680 0x0 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS 0x01A0 0x0468 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS 0x01A0 0x0468 0x0740 0x1 0x1 +#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3 0x01A0 0x0468 0x0644 0x2 0x0 +#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT 0x01A0 0x0468 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13 0x01A0 0x0468 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2 0x01A0 0x0468 0x0610 0x6 0x0 +#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x01A4 0x046C 0x0684 0x0 0x3 +#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS 0x01A4 0x046C 0x0570 0x1 0x2 +#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN 0x01A4 0x046C 0x0738 0x2 0x2 +#define MX6SLL_PAD_I2C2_SCL__SD3_WP 0x01A4 0x046C 0x0794 0x4 0x3 +#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14 0x01A4 0x046C 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY 0x01A4 0x046C 0x0600 0x6 0x1 +#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x01A8 0x0470 0x0688 0x0 0x3 +#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC 0x01A8 0x0470 0x056C 0x1 0x2 +#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT 0x01A8 0x0470 0x0000 0x2 0x0 +#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B 0x01A8 0x0470 0x0780 0x4 0x3 +#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15 0x01A8 0x0470 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x01AC 0x0474 0x05FC 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD 0x01AC 0x0474 0x0568 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x01AC 0x0474 0x0764 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x01AC 0x0474 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x01AC 0x0474 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET 0x01AC 0x0474 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x01AC 0x0474 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x01AC 0x0474 0x0768 0x6 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x01B0 0x0478 0x0608 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC 0x01B0 0x0478 0x0574 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x01B0 0x0478 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x01B0 0x0478 0x0764 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x01B0 0x0478 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x01B0 0x0478 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x01B0 0x0478 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x01B4 0x047C 0x0604 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS 0x01B4 0x047C 0x0578 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x01B4 0x047C 0x0760 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x01B4 0x047C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0 0x01B4 0x047C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP 0x01B4 0x047C 0x077C 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10 0x01B4 0x047C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x01B8 0x0480 0x0614 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD 0x01B8 0x0480 0x0564 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x01B8 0x0480 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x01B8 0x0480 0x0760 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1 0x01B8 0x0480 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B 0x01B8 0x0480 0x0778 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11 0x01B8 0x0480 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x01B8 0x0480 0x0000 0x6 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x01BC 0x0484 0x061C 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x01BC 0x0484 0x073C 0x1 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX 0x01BC 0x0484 0x0754 0x2 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX 0x01BC 0x0484 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x01BC 0x0484 0x05F4 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET 0x01BC 0x0484 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x01BC 0x0484 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x01BC 0x0484 0x0768 0x6 0x2 +#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x01C0 0x0488 0x0624 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x01C0 0x0488 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX 0x01C0 0x0488 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX 0x01C0 0x0488 0x0754 0x2 0x3 +#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x01C0 0x0488 0x05F0 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x01C0 0x0488 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x01C0 0x0488 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x01C4 0x048C 0x0620 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x01C4 0x048C 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS 0x01C4 0x048C 0x0750 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS 0x01C4 0x048C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK 0x01C4 0x048C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP 0x01C4 0x048C 0x0774 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x01C4 0x048C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x01C4 0x048C 0x076C 0x6 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x01C8 0x0490 0x0628 0x0 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x01C8 0x0490 0x0618 0x1 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS 0x01C8 0x0490 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS 0x01C8 0x0490 0x0750 0x2 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC 0x01C8 0x0490 0x05F8 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B 0x01C8 0x0490 0x0770 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x01C8 0x0490 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x01C8 0x0490 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD1_CLK__SD1_CLK 0x01CC 0x0494 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CLK__KEY_COL0 0x01CC 0x0494 0x06A0 0x2 0x2 +#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4 0x01CC 0x0494 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x01CC 0x0494 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_CMD__SD1_CMD 0x01D0 0x0498 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CMD__KEY_ROW0 0x01D0 0x0498 0x06C0 0x2 0x2 +#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5 0x01D0 0x0498 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14 0x01D0 0x0498 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x01D4 0x049C 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA0__KEY_COL1 0x01D4 0x049C 0x06A4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6 0x01D4 0x049C 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x01D4 0x049C 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x01D8 0x04A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1 0x01D8 0x04A0 0x06C4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7 0x01D8 0x04A0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x01D8 0x04A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x01DC 0x04A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA2__KEY_COL2 0x01DC 0x04A4 0x06A8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8 0x01DC 0x04A4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x01DC 0x04A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x01E0 0x04A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2 0x01E0 0x04A8 0x06C8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9 0x01E0 0x04A8 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x01E0 0x04A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x01E4 0x04AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA4__KEY_COL3 0x01E4 0x04AC 0x06AC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N 0x01E4 0x04AC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX 0x01E4 0x04AC 0x075C 0x4 0x6 +#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX 0x01E4 0x04AC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x01E4 0x04AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x01E8 0x04B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3 0x01E8 0x04B0 0x06CC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED 0x01E8 0x04B0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX 0x01E8 0x04B0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX 0x01E8 0x04B0 0x075C 0x4 0x7 +#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09 0x01E8 0x04B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x01EC 0x04B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA6__KEY_COL4 0x01EC 0x04B4 0x06B0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ 0x01EC 0x04B4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS 0x01EC 0x04B4 0x0758 0x4 0x4 +#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS 0x01EC 0x04B4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x01EC 0x04B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x01F0 0x04B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4 0x01F0 0x04B8 0x06D0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY 0x01F0 0x04B8 0x05AC 0x3 0x3 +#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS 0x01F0 0x04B8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS 0x01F0 0x04B8 0x0758 0x4 0x5 +#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10 0x01F0 0x04B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_RESET__SD2_RESET 0x01F4 0x04BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_RESET__WDOG2_B 0x01F4 0x04BC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT 0x01F4 0x04BC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD2_RESET__CSI_MCLK 0x01F4 0x04BC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x01F4 0x04BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CLK__SD2_CLK 0x01F8 0x04C0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS 0x01F8 0x04C0 0x0570 0x1 0x1 +#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK 0x01F8 0x04C0 0x0630 0x2 0x1 +#define MX6SLL_PAD_SD2_CLK__CSI_DATA00 0x01F8 0x04C0 0x05C8 0x3 0x1 +#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x01F8 0x04C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CMD__SD2_CMD 0x01FC 0x04C4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CMD__AUD4_RXC 0x01FC 0x04C4 0x056C 0x1 0x1 +#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0 0x01FC 0x04C4 0x0648 0x2 0x1 +#define MX6SLL_PAD_SD2_CMD__CSI_DATA01 0x01FC 0x04C4 0x05CC 0x3 0x1 +#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT 0x01FC 0x04C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x01FC 0x04C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x0200 0x04C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD 0x0200 0x04C8 0x0564 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI 0x0200 0x04C8 0x063C 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02 0x0200 0x04C8 0x05D0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS 0x0200 0x04C8 0x0760 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS 0x0200 0x04C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x0200 0x04C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x0204 0x04CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC 0x0204 0x04CC 0x0574 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO 0x0204 0x04CC 0x0638 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03 0x0204 0x04CC 0x05D4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS 0x0204 0x04CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS 0x0204 0x04CC 0x0760 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x0204 0x04CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x0208 0x04D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS 0x0208 0x04D0 0x0578 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04 0x0208 0x04D0 0x05D8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX 0x0208 0x04D0 0x0764 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX 0x0208 0x04D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x0208 0x04D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x020C 0x04D4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD 0x020C 0x04D4 0x0568 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05 0x020C 0x04D4 0x05DC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX 0x020C 0x04D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX 0x020C 0x04D4 0x0764 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x020C 0x04D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x0210 0x04D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4 0x0210 0x04D8 0x0784 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX 0x0210 0x04D8 0x074C 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX 0x0210 0x04D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06 0x0210 0x04D8 0x05E0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x0210 0x04D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02 0x0210 0x04D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x0214 0x04DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5 0x0214 0x04DC 0x0788 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX 0x0214 0x04DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX 0x0214 0x04DC 0x074C 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07 0x0214 0x04DC 0x05E4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN 0x0214 0x04DC 0x0738 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31 0x0214 0x04DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x0218 0x04E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6 0x0218 0x04E0 0x078C 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS 0x0218 0x04E0 0x0748 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS 0x0218 0x04E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08 0x0218 0x04E0 0x05E8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA6__SD2_WP 0x0218 0x04E0 0x077C 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x0218 0x04E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x021C 0x04E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7 0x021C 0x04E4 0x0790 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS 0x021C 0x04E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS 0x021C 0x04E4 0x0748 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09 0x021C 0x04E4 0x05EC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B 0x021C 0x04E4 0x0778 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x021C 0x04E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__SD3_CLK 0x0220 0x04E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS 0x0220 0x04E8 0x0588 0x1 0x0 +#define MX6SLL_PAD_SD3_CLK__KEY_COL5 0x0220 0x04E8 0x0694 0x2 0x0 +#define MX6SLL_PAD_SD3_CLK__CSI_DATA10 0x0220 0x04E8 0x05B0 0x3 0x0 +#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x0220 0x04E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x0220 0x04E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR 0x0220 0x04E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_CMD__SD3_CMD 0x0224 0x04EC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CMD__AUD5_RXC 0x0224 0x04EC 0x0584 0x1 0x0 +#define MX6SLL_PAD_SD3_CMD__KEY_ROW5 0x0224 0x04EC 0x06B4 0x2 0x0 +#define MX6SLL_PAD_SD3_CMD__CSI_DATA11 0x0224 0x04EC 0x05B4 0x3 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID 0x0224 0x04EC 0x0560 0x4 0x1 +#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x0224 0x04EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR 0x0224 0x04EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x0228 0x04F0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD 0x0228 0x04F0 0x057C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA0__KEY_COL6 0x0228 0x04F0 0x0698 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12 0x0228 0x04F0 0x05B8 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID 0x0228 0x04F0 0x055C 0x4 0x1 +#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x0228 0x04F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x022C 0x04F4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC 0x022C 0x04F4 0x058C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6 0x022C 0x04F4 0x06B8 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13 0x022C 0x04F4 0x05BC 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT 0x022C 0x04F4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x022C 0x04F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B 0x022C 0x04F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x0230 0x04F8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS 0x0230 0x04F8 0x0590 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA2__KEY_COL7 0x0230 0x04F8 0x069C 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14 0x0230 0x04F8 0x05C0 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT 0x0230 0x04F8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x0230 0x04F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC 0x0230 0x04F8 0x0768 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x0234 0x04FC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD 0x0234 0x04FC 0x0580 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7 0x0234 0x04FC 0x06BC 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15 0x0234 0x04FC 0x05C4 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT 0x0234 0x04FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x0234 0x04FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC 0x0234 0x04FC 0x076C 0x6 0x0 +#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE 0x0238 0x0500 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS 0x0238 0x0500 0x05A0 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0 0x0238 0x0500 0x065C 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1 0x0238 0x0500 0x0670 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x0238 0x0500 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x023C 0x0504 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC 0x023C 0x0504 0x059C 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK 0x023C 0x0504 0x0650 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2 0x023C 0x0504 0x0674 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x023C 0x0504 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE 0x0240 0x0508 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD 0x0240 0x0508 0x0594 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI 0x0240 0x0508 0x0658 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1 0x0240 0x0508 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x0240 0x0508 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC 0x0244 0x050C 0x05A4 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO 0x0244 0x050C 0x0654 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2 0x0244 0x050C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x0244 0x050C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS 0x0248 0x0510 0x05A8 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1 0x0248 0x0510 0x0660 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3 0x0248 0x0510 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18 0x0248 0x0510 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD 0x024C 0x0514 0x0598 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2 0x024C 0x0514 0x0664 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN 0x024C 0x0514 0x0678 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x024C 0x0514 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT 0x0250 0x0518 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET 0x0250 0x0518 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET 0x0250 0x0518 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x0250 0x0518 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID 0x0254 0x051C 0x055C 0x2 0x2 +#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT 0x0254 0x051C 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT 0x0254 0x051C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x0254 0x051C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN 0x0258 0x0520 0x0738 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD1_WP 0x0258 0x0520 0x0774 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD3_WP 0x0258 0x0520 0x0794 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x0258 0x0520 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT 0x025C 0x0524 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B 0x025C 0x0524 0x0770 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B 0x025C 0x0524 0x0780 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16 0x025C 0x0524 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B 0x0260 0x0528 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT 0x0260 0x0528 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY 0x0260 0x0528 0x05AC 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x0260 0x0528 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK 0x0260 0x0528 0x073C 0x6 0x0 + +#endif /* __DTS_IMX6SLL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi new file mode 100644 index 000000000000..000e6136a9d6 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -0,0 +1,780 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +#include <dt-bindings/clock/imx6sll-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx6sll-pinfunc.h" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi3 = &ecspi3; + spi4 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1075000 + 198000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6SLL_CLK_ARM>, + <&clks IMX6SLL_CLK_PLL2_PFD2>, + <&clks IMX6SLL_CLK_STEP>, + <&clks IMX6SLL_CLK_PLL1_SW>, + <&clks IMX6SLL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + }; + }; + + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + + ckil: clock-ckil { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock-ipp-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock-ipp-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + + tempmon: temperature-sensor { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + ocram: sram@900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + }; + + L2: l2-cache@a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + aips1: aips-bus@2000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba: spba-bus@2000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@2004000 { + compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>, + <&clks IMX6SLL_CLK_OSC>, + <&clks IMX6SLL_CLK_SPDIF>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_IPG>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: spi@2008000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI1>, + <&clks IMX6SLL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: spi@200c000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI2>, + <&clks IMX6SLL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: spi@2010000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI3>, + <&clks IMX6SLL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: spi@2014000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI4>, + <&clks IMX6SLL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@2018000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART4_IPG>, + <&clks IMX6SLL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@2020000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART1_IPG>, + <&clks IMX6SLL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@2024000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02024000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART2_IPG>, + <&clks IMX6SLL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ssi1: ssi-controller@2028000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 37 22 0>, <&sdma 38 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI1_IPG>, + <&clks IMX6SLL_CLK_SSI1>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi2: ssi-controller@202c000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 41 22 0>, <&sdma 42 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI2_IPG>, + <&clks IMX6SLL_CLK_SSI2>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi3: ssi-controller@2030000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 45 22 0>, <&sdma 46 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI3_IPG>, + <&clks IMX6SLL_CLK_SSI3>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + uart3: serial@2034000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02034000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-name = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART3_IPG>, + <&clks IMX6SLL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + pwm1: pwm@2080000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM1>, + <&clks IMX6SLL_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@2084000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM2>, + <&clks IMX6SLL_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@2088000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM3>, + <&clks IMX6SLL_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@208c000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM4>, + <&clks IMX6SLL_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + gpt1: timer@2098000 { + compatible = "fsl,imx6sl-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPT_BUS>, + <&clks IMX6SLL_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@209c000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@20a0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@20a4000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@20a8000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@20ac000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@20b0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: keypad@20b8000 { + compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_KPP>; + status = "disabled"; + }; + + wdog1: watchdog@20bc000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG1>; + }; + + wdog2: watchdog@20c0000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: clock-controller@20c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + + assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>; + assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>; + }; + + anatop: anatop@20c8000 { + compatible = "fsl,imx6sll-anatop", + "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x4000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p0: regulator-3p0@20c8120 { + compatible = "fsl,anatop-regulator"; + reg = <0x20c8120>; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + }; + + usbphy1: usb-phy@20c9000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usb-phy@20ca000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY2>; + phy-reg_3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@20cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x61>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + src: reset-controller@20d8000 { + compatible = "fsl,imx6sll-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: interrupt-controller@20dc000 { + compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>; + }; + + iomuxc: pinctrl@20e0000 { + compatible = "fsl,imx6sll-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@20e4000 { + compatible = "fsl,imx6sll-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + csi: csi@20e8000 { + compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi"; + reg = <0x020e8000 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_CSI>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "disp-axi", "csi_mclk", "disp_dcic"; + status = "disabled"; + }; + + sdma: dma-controller@20ec000 { + compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_SDMA>, + <&clks IMX6SLL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + iram = <&ocram>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + + lcdif: lcd-controller@20f8000 { + compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; + reg = <0x020f8000 0x4000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>, + <&clks IMX6SLL_CLK_LCDIF_APB>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + dcp: dcp@20fc000 { + compatible = "fsl,imx28-dcp"; + reg = <0x020fc000 0x4000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DCP>; + clock-names = "dcp"; + }; + }; + + aips2: aips-bus@2100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@2184000 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbotg2: usb@2184200 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbmisc: usbmisc@2184800 { + #index-cells = <1>; + compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc", + "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + }; + + usdhc1: mmc@2190000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc2: mmc@2194000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc3: mmc@2198000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + i2c1: i2c@21a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@21a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@21a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C3>; + status = "disabled"; + }; + + mmdc: memory-controller@21b0000 { + compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + ocotp: ocotp-ctrl@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sll-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SLL_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; + }; + + audmux: audmux@21d8000 { + compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + uart5: serial@21f4000 { + compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART5_IPG>, + <&clks IMX6SLL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 59e52f504922..adb5cc7d8ce2 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -47,11 +11,6 @@ model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board"; compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx"; - aliases { - fb-lcd = &lcdif1; - t-lcd = &t_lcd; - }; - memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -261,38 +220,6 @@ status = "okay"; }; -&lcdif1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif1>; - lcd-supply = <®_3p3v>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&t_lcd>; - t_lcd: t_lcd_default { - clock-frequency = <74160000>; - hactive = <1280>; - vactive = <720>; - hback-porch = <220>; - hfront-porch = <110>; - vback-porch = <20>; - vfront-porch = <5>; - hsync-len = <40>; - vsync-len = <5>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -524,40 +451,6 @@ >; }; - pinctrl_lcdif1: lcdif1grp { - fsl,pins = < - MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 - MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 - MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 - MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 - MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 - MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 - MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 - MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 - MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 - MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 - MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 - MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 - MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 - MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 - MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 - MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 - MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 - MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 - MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 - MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 - MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 - MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 - MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 - MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 - MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 - MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 - MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 - >; - }; - pinctrl_pcie: pciegrp { fsl,pins = < MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0 diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index e3533e74ccc8..9cc6ff206aea 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -63,6 +63,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 4e4a55aad5c9..844caa39364f 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -79,6 +79,7 @@ 198000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6SX_CLK_ARM>, <&clks IMX6SX_CLK_PLL2_PFD2>, <&clks IMX6SX_CLK_STEP>, @@ -165,6 +166,12 @@ interrupt-parent = <&gpc>; ranges; + ocram_s: sram@8f8000 { + compatible = "mmio-sram"; + reg = <0x008f8000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCRAM_S>; + }; + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; @@ -591,8 +598,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -621,8 +628,8 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2875000>; + regulator-min-microvolt = <2250000>; + regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; @@ -814,7 +821,6 @@ crypto: caam@2100000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <4>; #address-cells = <1>; #size-cells = <1>; reg = <0x2100000 0x10000>; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts new file mode 100644 index 000000000000..3792679c0c90 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore6UL SBC Express board device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6ul.dtsi" +#include "imx6ul-ccimx6ulsom.dtsi" + +/ { + model = "Digi International ConnectCore 6UL SBC Express."; + compatible = "digi,ccimx6ulsbcexpress", "digi,ccimx6ulsom", + "fsl,imx6ul"; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <&ext_3v3>; + status = "okay"; +}; + +&ecspi3 { + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3_master>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <0>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + broken-cd; /* no carrier detect line (use polling) */ + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + /* GPIO1_4/ADC1_IN4 (pin 7 of the expansion header) */ + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_ecspi3_master: ecspi3grp1 { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 /* Chip Select */ + >; + }; + + pinctrl_ecspi3_slave: ecspi3grp2 { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x10b0 /* Chip Select */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x1b020 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x10b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10071 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + /* General purpose pinctrl */ + pinctrl_hog: hoggrp { + fsl,pins = < + /* GPIOs BANK 3 */ + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0xf030 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi new file mode 100644 index 000000000000..c71a84da1af0 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore 6UL System-On-Module device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x4000000>; + linux,cma-default; + }; + }; +}; + +&adc1 { + vref-supply = <&vdda_adc_3v3>; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pfuze3000: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + int_3v3: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <6250>; + regulator-boot-on; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_arm_soc_in: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-ramp-delay = <6250>; + regulator-boot-on; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <925000>; + }; + }; + + ext_3v3: sw2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr3: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1300000>; + }; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vdd_snvs_3v3: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vdda_adc_3v3: vldo1 { + compatible = "regulator-fixed"; + regulator-name = "vref-adc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo2_ext: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vdda_wlan: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_high_in: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_int: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4_ext: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vcoin_chg: vcoin { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_gpmi_nand: gpmigrp { + fsl,pins = < + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; +}; + +®_arm { + vin-supply = <&vdd_arm_soc_in>; + regulator-allow-bypass; +}; + +®_soc { + vin-supply = <&vdd_arm_soc_in>; + regulator-allow-bypass; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 47682b8c023c..0c09420f9951 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -51,8 +51,9 @@ model = "Technexion Pico i.MX6UL Board"; compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul"; + /* Will be filled by the bootloader */ memory@80000000 { - reg = <0x80000000 0x10000000>; + reg = <0x80000000 0>; }; chosen { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 47a3453a4211..6dc0b569acdf 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -62,6 +62,7 @@ device_type = "cpu"; reg = <0>; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; operating-points = < /* kHz uV */ 696000 1275000 @@ -433,6 +434,7 @@ reg = <0x0209c000 0x4000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO1>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -446,6 +448,7 @@ reg = <0x020a0000 0x4000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -458,6 +461,7 @@ reg = <0x020a4000 0x4000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -470,6 +474,7 @@ reg = <0x020a8000 0x4000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -482,6 +487,7 @@ reg = <0x020ac000 0x4000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPIO5>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 3dffbcd50bf6..183193e8580d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -20,20 +20,6 @@ &cpu0 { clock-frequency = <792000000>; - operating-points = < - /* kHz uV */ - 792000 1225000 - 528000 1175000 - 396000 1025000 - 198000 950000 - >; - fsl,soc-operating-points = < - /* KHz uV */ - 792000 1175000 - 528000 1175000 - 396000 1175000 - 198000 1175000 - >; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index ebc25c98e5e1..cd1776a7015a 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -1,43 +1,6 @@ -/* - * Copyright 2016 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2016 Freescale Semiconductor, Inc. #include "imx6ul.dtsi" #include "imx6ull-pinfunc.h" @@ -48,6 +11,25 @@ /* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ /delete-node/ &crypto; +&cpu0 { + operating-points = < + /* kHz uV */ + 900000 1275000 + 792000 1225000 + 528000 1175000 + 396000 1025000 + 198000 950000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 900000 1175000 + 792000 1175000 + 528000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; + / { soc { aips3: aips-bus@2200000 { diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 70c53e50b2fc..d8aac4a2d02a 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -48,11 +11,6 @@ model = "Boundary Devices i.MX7 Nitrogen7 Board"; compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d"; - aliases { - fb-lcd = &lcdif; - t-lcd = &t_lcd; - }; - memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -65,7 +23,7 @@ default-on; }; - backlight-j20 { + backlight_lcd: backlight-j20 { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -73,6 +31,17 @@ status = "okay"; }; + panel-lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -317,35 +286,11 @@ }; &lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat - &pinctrl_lcdif_ctrl>; - lcd-supply = <®_vref_3v3>; - display = <&display0>; status = "okay"; - display0: lcd-display { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&t_lcd>; - t_lcd: t_lcd_default { - /* default to Okaya display */ - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <48>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 940849163104..c9b3c60b0eb2 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -10,6 +10,10 @@ model = "Freescale i.MX7 SabreSD Board"; compatible = "fsl,imx7d-sdb", "fsl,imx7d"; + chosen { + stdout-path = &uart1; + }; + memory@80000000 { reg = <0x80000000 0x80000000>; }; @@ -71,14 +75,6 @@ enable-active-high; }; - reg_can2_3v3: regulator-can2-3v3 { - compatible = "regulator-fixed"; - regulator-name = "can2-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - reg_vref_1v8: regulator-vref-1v8 { compatible = "regulator-fixed"; regulator-name = "vref-1v8"; @@ -116,10 +112,17 @@ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + panel { compatible = "innolux,at043tn24"; - pinctrl-0 = <&pinctrl_backlight>; - enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; power-supply = <®_lcd_3v3>; port { @@ -712,6 +715,12 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < @@ -719,9 +728,9 @@ >; }; - pinctrl_backlight: backlightgrp { + pinctrl_pwm1: pwm1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x110b0 + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30 >; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 8d3d123d0a5c..7cbc2ffa4b3a 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -11,6 +11,7 @@ cpu0: cpu@0 { clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu1: cpu@1 { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 9ced589bfa96..a052198f6e96 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -842,7 +842,6 @@ crypto: caam@30900000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <8>; #address-cells = <1>; #size-cells = <1>; reg = <0x30900000 0x40000>; diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index 66954aaf2c47..5cae74eb6cdd 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi index 476273b3f994..0e99df218252 100644 --- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi index a17311c602aa..1db17ec744b1 100644 --- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi @@ -225,3 +225,23 @@ netcp: netcp@24000000 { }; }; }; + +sa_subsys: subsys@24080000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x24080000 0x40000>; + + sa_config: subsys@0 { + compatible = "syscon"; + reg = <0x0 0x100>; + }; + + rng@24000 { + compatible = "ti,keystone-rng"; + reg = <0x24000 0x1000>; + ti,syscon-sa-cfg = <&sa_config>; + clocks = <&clksa>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 154fdd7a7022..b7f10bf94576 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -37,6 +37,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 { + compatible = "regulator-fixed"; + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; &k2g_pinctrl { @@ -128,6 +136,30 @@ K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE1) /* qspicsn3.dcan1rx */ >; }; + + emac_pins: pinmux_emac_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD1.RGMII_RXD1 */ + K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD2.RGMII_RXD2 */ + K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD3.RGMII_RXD3 */ + K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD0.RGMII_RXD0 */ + K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD0.RGMII_TXD0 */ + K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD1.RGMII_TXD1 */ + K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD2.RGMII_TXD2 */ + K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD3.RGMII_TXD3 */ + K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXCLK.RGMII_TXC */ + K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXEN.RGMII_TXCTL */ + K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXCLK.RGMII_RXC */ + K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXDV.RGMII_RXCTL */ + >; + }; + + mdio_pins: pinmux_mdio_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_CLK.MDIO_CLK */ + K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */ + >; + }; }; &uart0 { @@ -144,6 +176,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&vcc3v3_dcin_reg>; + vqmmc-supply = <&vcc3v3_dcin_reg>; cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -152,6 +185,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */ + vqmmc-supply = <&vcc1v8_ldo1_reg>; ti,non-removable; status = "okay"; }; @@ -294,3 +328,32 @@ pinctrl-0 = <&dcan1_pins>; status = "okay"; }; + +&qmss { + status = "okay"; +}; + +&knav_dmas { + status = "okay"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&gbe0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&netcp { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts index d820ed2474bb..2a2d38cf0fff 100644 --- a/arch/arm/boot/dts/keystone-k2g-ice.dts +++ b/arch/arm/boot/dts/keystone-k2g-ice.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "keystone-k2g.dtsi" +#include <dt-bindings/net/ti-dp83867.h> / { compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone"; @@ -281,6 +282,30 @@ K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn1.gpio0_102 */ >; }; + + emac_pins: pinmux_emac_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD1.RGMII_RXD1 */ + K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD2.RGMII_RXD2 */ + K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD3.RGMII_RXD3 */ + K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXD0.RGMII_RXD0 */ + K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD0.RGMII_TXD0 */ + K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD1.RGMII_TXD1 */ + K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD2.RGMII_TXD2 */ + K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXD3.RGMII_TXD3 */ + K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXCLK.RGMII_TXC */ + K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_TXEN.RGMII_TXCTL */ + K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXCLK.RGMII_RXC */ + K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1) /* MII_RXDV.RGMII_RXCTL */ + >; + }; + + mdio_pins: pinmux_mdio_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_CLK.MDIO_CLK */ + K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */ + >; + }; }; &uart0 { @@ -386,3 +411,37 @@ vcc-supply = <&vdd_3v3>; }; }; + +&qmss { + status = "okay"; +}; + +&knav_dmas { + status = "okay"; +}; + +&netcp { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins>; + status = "okay"; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + ethphy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&gbe0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi new file mode 100644 index 000000000000..d0e6a9a43402 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for K2G Netcp driver + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +qmss: qmss@4020000 { + compatible = "ti,66ak2g-navss-qm"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k2g_pds 0x0018>; + clocks = <&k2g_clks 0x0018 0>; + clock-names = "nss_vclk"; + ranges; + queue-range = <0 0x80>; + linkram0 = <0x4020000 0x7ff>; + status = "disabled"; + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x80>; + reg = <0x4100000 0x800>, + <0x4040000 0x100>, + <0x4080000 0x800>, + <0x40c0000 0x800>; + reg-names = "peek", "config", + "region", "push"; + }; + + }; + queue-pools { + qpend { + qpend-0 { + qrange = <77 8>; + interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04 + 0 311 0xf04 0 312 0xf04 0 313 0xf04 + 0 314 0xf04 0 315 0xf04>; + qalloc-by-id; + }; + }; + general-purpose { + gp-0 { + qrange = <112 8>; + }; + netcp-tx { + qrange = <5 8>; + qalloc-by-id; + }; + }; + }; + + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <1023 128>; /* num_desc desc_size */ + link-index = <0x400>; + }; + }; +}; /* qmss */ + +knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + power-domains = <&k2g_pds 0x0018>; + clocks = <&k2g_clks 0x0018 0>; + clock-names = "nss_vclk"; + ranges; + ti,navigator-cloud-address = <0x40c0000 0x40c0000 0x40c0000 0x40c0000>; + + dma_gbe: dma_gbe@0 { + reg = <0x4010000 0x100>, + <0x4011000 0x2a0>, /* 21 Tx channels */ + <0x4012000 0x400>, /* 32 Rx channels */ + <0x4010100 0x80>, + <0x4013000 0x400>; /* 32 Rx flows */ + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; + +}; + +netcp: netcp@4000000 { + reg = <0x2620110 0x8>; + reg-names = "efuse"; + compatible = "ti,netcp-1.0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + power-domains = <&k2g_pds 0x0018>; + clocks = <&k2g_clks 0x0018 3>, <&k2g_clks 0x0018 8>; + clock-names = "ethss_clk", "cpts"; + + /* NetCP address range */ + ranges = <0 0x4000000 0x1000000>; + + dma-coherent; + + ti,navigator-dmas = <&dma_gbe 0>, <&dma_gbe 5>; + ti,navigator-dma-names = "netrx0", "nettx"; + + netcp-devices { + #address-cells = <1>; + #size-cells = <1>; + ranges; + gbe: gbe@200000 { + label = "netcp-gbe"; + compatible = "ti,netcp-gbe-2"; + reg = <0x200000 0x20>, <0x220000 0x20000>; + enable-ale; + tx-queue = <5>; + tx-channel = "nettx"; + cpts-rftclk-sel = <0>; + cpts-ext-ts-inputs = <8>; + + interfaces { + gbe0: interface-0 { + slave-port = <0>; + link-interface = <5>; + }; + }; + }; + }; + + netcp-interfaces { + interface-0 { + rx-channel = "netrx0"; + rx-pool = <512 12>; + tx-pool = <511 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <77>; + tx-completion-queue = <78>; + efuse-mac = <1>; + netcp-gbe = <&gbe0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index da78c0034427..738b44cf2b0b 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -391,13 +391,10 @@ }; mmc0: mmc@23000000 { - compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; + compatible = "ti,k2g-sdhci"; reg = <0x23000000 0x400>; interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>; - dmas = <&edma1 24 0>, <&edma1 25 0>; - dma-names = "tx", "rx"; bus-width = <4>; - ti,needs-special-reset; no-1-8-v; max-frequency = <96000000>; power-domains = <&k2g_pds 0xb>; @@ -407,13 +404,12 @@ }; mmc1: mmc@23100000 { - compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc"; + compatible = "ti,k2g-sdhci"; reg = <0x23100000 0x400>; interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>; - dmas = <&edma1 26 0>, <&edma1 27 0>; - dma-names = "tx", "rx"; bus-width = <8>; - ti,needs-special-reset; + no-1-8-v; + non-removable; max-frequency = <96000000>; power-domains = <&k2g_pds 0xc>; clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>; @@ -609,5 +605,18 @@ reg = <0x21010000 0x200>; interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>; }; + + mdio: mdio@4200f00 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + reg = <0x04200f00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k2g_clks 0x0018 3>; + clock-names = "fck"; + power-domains = <&k2g_pds 0x0018>; + status = "disabled"; + bus_freq = <2500000>; + }; + #include "keystone-k2g-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index b88c0689c285..e203145acbea 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -228,3 +228,23 @@ netcp: netcp@2000000 { }; }; }; + +sa_subsys: subsys@20c0000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x20c0000 0x40000>; + + sa_config: subsys@0 { + compatible = "syscon"; + reg = <0x0 0x100>; + }; + + rng@24000 { + compatible = "ti,keystone-rng"; + reg = <0x24000 0x1000>; + ti,syscon-sa-cfg = <&sa_config>; + clocks = <&clksa>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi index 9ec84228bc16..a2e47bad3307 100644 --- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi @@ -208,3 +208,23 @@ netcp: netcp@26000000 { }; }; }; + +sa_subsys: subsys@26080000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x26080000 0x40000>; + + sa_config: subsys@0 { + compatible = "syscon"; + reg = <0x0 0x100>; + }; + + rng@24000 { + compatible = "ti,keystone-rng"; + reg = <0x24000 0x1000>; + ti,syscon-sa-cfg = <&sa_config>; + clocks = <&clksa>; + clock-names = "fck"; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 3bb28c03ca74..ac343330d0c8 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -142,7 +142,7 @@ compatible = "ti,wl1273"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */ + interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 2 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 234afd6d60ec..9d5d53fbe9c0 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -48,7 +48,7 @@ compatible = "ti,wl1283"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + interrupts = <24 IRQ_TYPE_EDGE_RISING>; /* gpio 152 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index c55d479971cc..f18490548c78 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -84,6 +84,7 @@ device_type = "cpu"; reg = <0xf01>; clocks = <&clockgen 1 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index d1eb123bc73b..1cdc346a05e8 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -92,6 +92,7 @@ <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; clock-frequency = <1300000000>; }; @@ -103,6 +104,7 @@ <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; clock-frequency = <1300000000>; }; @@ -114,6 +116,7 @@ <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; clock-frequency = <1300000000>; }; }; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 531d905d924f..2b760f90f38c 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -91,19 +91,19 @@ blue { label = "bpi-r2:pio:blue"; - gpios = <&pio 241 GPIO_ACTIVE_HIGH>; + gpios = <&pio 240 GPIO_ACTIVE_LOW>; default-state = "off"; }; green { label = "bpi-r2:pio:green"; - gpios = <&pio 240 GPIO_ACTIVE_HIGH>; + gpios = <&pio 241 GPIO_ACTIVE_LOW>; default-state = "off"; }; red { label = "bpi-r2:pio:red"; - gpios = <&pio 239 GPIO_ACTIVE_HIGH>; + gpios = <&pio 239 GPIO_ACTIVE_LOW>; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts deleted file mode 100644 index 96ff3c9068ae..000000000000 --- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2017 MediaTek Inc. - * Author: John Crispin <john@phrozen.org> - * - */ - -/dts-v1/; -#include "mt7623n-rfb.dtsi" - -/ { - model = "MediaTek MT7623N NAND reference board"; - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623"; -}; - -&bch { - status = "okay"; -}; - -&nandc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_default>; - - nand@0 { - reg = <0>; - spare_per_sector = <64>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <12>; - nand-ecc-step-size = <1024>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "preloader"; - reg = <0x0 0x40000>; - }; - - partition@40000 { - label = "uboot"; - reg = <0x40000 0x80000>; - }; - - partition@c0000 { - label = "uboot-env"; - reg = <0xC0000 0x40000>; - }; - - partition@140000 { - label = "bootimg"; - reg = <0x140000 0x2000000>; - }; - - partition@2140000 { - label = "recovery"; - reg = <0x2140000 0x2000000>; - }; - - partition@4140000 { - label = "rootfs"; - reg = <0x4140000 0x1000000>; - }; - - partition@5140000 { - label = "usrdata"; - reg = <0x5140000 0x1000000>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi deleted file mode 100644 index 5c5cc7da5dd2..000000000000 --- a/arch/arm/boot/dts/mt7623n-rfb.dtsi +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2017 MediaTek Inc. - * Author: John Crispin <john@phrozen.org> - * Sean Wang <sean.wang@mediatek.com> - * - */ - -/dts-v1/; -#include "mt7623.dtsi" -#include "mt6323.dtsi" - -/ { - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - cpus { - cpu0 { - proc-supply = <&mt6323_vproc_reg>; - }; - - cpu1 { - proc-supply = <&mt6323_vproc_reg>; - }; - - cpu2 { - proc-supply = <&mt6323_vproc_reg>; - }; - - cpu3 { - proc-supply = <&mt6323_vproc_reg>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0 0x80000000 0 0x40000000>; - }; - - usb_p1_vbus: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&pio 135 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&mmc0 { - vmmc-supply = <&mt6323_vemc3v3_reg>; - vqmmc-supply = <&mt6323_vio18_reg>; -}; - -&mmc1 { - vmmc-supply = <&mt6323_vmch_reg>; - vqmmc-supply = <&mt6323_vmc_reg>; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb1 { - vbus-supply = <&usb_p1_vbus>; - status = "okay"; -}; - -&u3phy1 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index 4994e33bf663..632f52efdf98 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -141,7 +141,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 145 */ + interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 145 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 8c63ac5bbb12..6e944dfa0f3d 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -81,7 +81,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index ee64191e41ca..4c1227d1e79b 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -133,7 +133,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */ + interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 321c2b7a4e9f..285681d7af49 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -49,6 +49,6 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio6>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 177 */ + interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */ }; }; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 76dc08868bfb..1adc73bd2ca0 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -71,6 +71,6 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio5>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */ + interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */ }; }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 96d0301a336a..aac27a441331 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -202,7 +202,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio6>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 162 */ + interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index e7c3c563ff8f..12d6822f0057 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -128,6 +128,8 @@ gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ linux,code = <KEY_VOLUMEDOWN>; linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; }; slider { @@ -136,7 +138,8 @@ linux,input-type = <EV_SW>; linux,code = <SW_KEYPAD_SLIDE>; linux,can-disable; - + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; }; }; @@ -369,7 +372,7 @@ compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; interrupt-parent = <&gpio4>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */ + interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index a9a584b5b955..cfcac0d73851 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -36,6 +36,8 @@ label = "button0"; linux,code = <BTN_0>; gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; wakeup-source; }; }; @@ -140,7 +142,7 @@ ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */ + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; /* gpio_44 */ phy-mode = "mii"; diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index eb123b24c8e3..5e8169153414 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -248,6 +248,7 @@ ti,bus-width = <4>; ti,non-removable; cap-power-off-card; + keep-power-in-suspend; }; &twl_usb_comparator { diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi new file mode 100644 index 000000000000..6eb26b837446 --- /dev/null +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -0,0 +1,2444 @@ +// SPDX-License-Identifier: GPL-2.0 +&l4_cfg { /* 0x4a000000 */ + compatible = "ti,omap4-l4-cfg", "simple-bus"; + reg = <0x4a000000 0x800>, + <0x4a000800 0x800>, + <0x4a001000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */ + <0x00080000 0x4a080000 0x080000>, /* segment 1 */ + <0x00100000 0x4a100000 0x080000>, /* segment 2 */ + <0x00180000 0x4a180000 0x080000>, /* segment 3 */ + <0x00200000 0x4a200000 0x080000>, /* segment 4 */ + <0x00280000 0x4a280000 0x080000>, /* segment 5 */ + <0x00300000 0x4a300000 0x080000>; /* segment 6 */ + + segment@0 { /* 0x4a000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00002000 0x00002000 0x001000>, /* ap 3 */ + <0x00003000 0x00003000 0x001000>, /* ap 4 */ + <0x00004000 0x00004000 0x001000>, /* ap 5 */ + <0x00005000 0x00005000 0x001000>, /* ap 6 */ + <0x00056000 0x00056000 0x001000>, /* ap 7 */ + <0x00057000 0x00057000 0x001000>, /* ap 8 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 9 */ + <0x00058000 0x00058000 0x004000>, /* ap 10 */ + <0x00062000 0x00062000 0x001000>, /* ap 11 */ + <0x00063000 0x00063000 0x001000>, /* ap 12 */ + <0x00008000 0x00008000 0x002000>, /* ap 23 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 24 */ + <0x00066000 0x00066000 0x001000>, /* ap 25 */ + <0x00067000 0x00067000 0x001000>, /* ap 26 */ + <0x0005e000 0x0005e000 0x002000>, /* ap 80 */ + <0x00060000 0x00060000 0x001000>, /* ap 81 */ + <0x00064000 0x00064000 0x001000>, /* ap 86 */ + <0x00065000 0x00065000 0x001000>; /* ap 87 */ + + target-module@2000 { /* 0x4a002000, ap 3 06.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_core"; + reg = <0x2000 0x4>, + <0x2010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + + omap4_scm_core: scm@0 { + compatible = "ti,omap4-scm-core", "simple-bus"; + reg = <0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; + + omap_control_usb2phy: control-phy@300 { + compatible = "ti,control-phy-usb2"; + reg = <0x300 0x4>; + reg-names = "power"; + }; + + omap_control_usbotg: control-phy@33c { + compatible = "ti,control-phy-otghs"; + reg = <0x33c 0x4>; + reg-names = "otghs_control"; + }; + }; + }; + + target-module@4000 { /* 0x4a004000, ap 5 02.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + cm1: cm1@0 { + compatible = "ti,omap4-cm1", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm1_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm1_clockdomains: clockdomains { + }; + }; + }; + + target-module@8000 { /* 0x4a008000, ap 23 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x8000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x2000>; + + cm2: cm2@0 { + compatible = "ti,omap4-cm2", "simple-bus"; + reg = <0x0 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + cm2_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm2_clockdomains: clockdomains { + }; + }; + }; + + target-module@56000 { /* 0x4a056000, ap 7 0a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "dma_system"; + reg = <0x56000 0x4>, + <0x5602c 0x4>, + <0x56028 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */ + clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x56000 0x1000>; + + sdma: dma-controller@0 { + compatible = "ti,omap4430-sdma"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; + }; + }; + + target-module@58000 { /* 0x4a058000, ap 10 0e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "hsi"; + reg = <0x58000 0x4>, + <0x58010 0x4>, + <0x58014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58000 0x4000>; + + hsi: hsi@0 { + compatible = "ti,omap4-hsi"; + reg = <0x0 0x4000>, + <0x4a05c000 0x1000>; + reg-names = "sys", "gdd"; + + clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; + clock-names = "hsi_fck"; + + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x4000>; + + hsi_port1: hsi-port@2000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x2000 0x800>, + <0x2800 0x800>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + }; + + hsi_port2: hsi-port@3000 { + compatible = "ti,omap4-hsi-port"; + reg = <0x3000 0x800>, + <0x3800 0x800>; + reg-names = "tx", "rx"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@5e000 { /* 0x4a05e000, ap 80 68.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5e000 0x2000>; + }; + + target-module@62000 { /* 0x4a062000, ap 11 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_tll_hs"; + reg = <0x62000 0x4>, + <0x62010 0x4>, + <0x62014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x62000 0x1000>; + + usbhstll: usbhstll@0 { + compatible = "ti,usbhs-tll"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@64000 { /* 0x4a064000, ap 86 1e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "usb_host_hs"; + reg = <0x64000 0x4>, + <0x64010 0x4>, + <0x64014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x64000 0x1000>; + + usbhshost: usbhshost@0 { + compatible = "ti,usbhs-host"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + clocks = <&init_60m_fclk>, + <&xclk60mhsp1_ck>, + <&xclk60mhsp2_ck>; + clock-names = "refclk_60m_int", + "refclk_60m_ext_p1", + "refclk_60m_ext_p2"; + + usbhsohci: ohci@800 { + compatible = "ti,ohci-omap3"; + reg = <0x800 0x400>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + remote-wakeup-connected; + }; + + usbhsehci: ehci@c00 { + compatible = "ti,ehci-omap"; + reg = <0xc00 0x400>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + target-module@66000 { /* 0x4a066000, ap 25 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mmu_dsp"; + reg = <0x66000 0x4>, + <0x66010 0x4>, + <0x66014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */ + clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x66000 0x1000>; + + /* mmu_dsp cannot be moved before reset driver */ + status = "disabled"; + }; + }; + + segment@80000 { /* 0x4a080000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ + <0x0005a000 0x000da000 0x001000>, /* ap 14 */ + <0x0005b000 0x000db000 0x001000>, /* ap 15 */ + <0x0005c000 0x000dc000 0x001000>, /* ap 16 */ + <0x0005d000 0x000dd000 0x001000>, /* ap 17 */ + <0x0005e000 0x000de000 0x001000>, /* ap 18 */ + <0x00060000 0x000e0000 0x001000>, /* ap 19 */ + <0x00061000 0x000e1000 0x001000>, /* ap 20 */ + <0x00074000 0x000f4000 0x001000>, /* ap 27 */ + <0x00075000 0x000f5000 0x001000>, /* ap 28 */ + <0x00076000 0x000f6000 0x001000>, /* ap 29 */ + <0x00077000 0x000f7000 0x001000>, /* ap 30 */ + <0x00036000 0x000b6000 0x001000>, /* ap 69 */ + <0x00037000 0x000b7000 0x001000>, /* ap 70 */ + <0x0004d000 0x000cd000 0x001000>, /* ap 78 */ + <0x0004e000 0x000ce000 0x001000>, /* ap 79 */ + <0x00029000 0x000a9000 0x001000>, /* ap 82 */ + <0x0002a000 0x000aa000 0x001000>, /* ap 83 */ + <0x0002b000 0x000ab000 0x001000>, /* ap 84 */ + <0x0002c000 0x000ac000 0x001000>, /* ap 85 */ + <0x0002d000 0x000ad000 0x001000>, /* ap 88 */ + <0x0002e000 0x000ae000 0x001000>; /* ap 89 */ + + target-module@29000 { /* 0x4a0a9000, ap 82 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x29000 0x1000>; + }; + + target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "usb_otg_hs"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2b000 0x1000>; + + usb_otg_hs: usb_otg_hs@0 { + compatible = "ti,omap4-musb"; + reg = <0x0 0x7ff>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc", "dma"; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + ctrl-module = <&omap_control_usbotg>; + }; + }; + + target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "ocp2scp_usb_phy"; + reg = <0x2d000 0x4>, + <0x2d010 0x4>, + <0x2d014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2d000 0x1000>; + + ocp2scp@0 { + compatible = "ti,omap-ocp2scp"; + reg = <0x0 0x1f>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000>; + usb2_phy: usb2phy@80 { + compatible = "ti,omap-usb2"; + reg = <0x80 0x58>; + ctrl-module = <&omap_control_usb2phy>; + clocks = <&usb_phy_cm_clk32k>; + clock-names = "wkupclk"; + #phy-cells = <0>; + }; + }; + }; + + target-module@36000 { /* 0x4a0b6000, ap 69 60.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + }; + + target-module@4d000 { /* 0x4a0cd000, ap 78 58.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000 0x1000>; + }; + + target-module@59000 { /* 0x4a0d9000, ap 13 1a.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_mpu"; + reg = <0x59038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + smartreflex_mpu: smartreflex@0 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_iva"; + reg = <0x5b038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + smartreflex_iva: smartreflex@0 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */ + compatible = "ti,sysc-omap4-sr", "ti,sysc"; + ti,hwmods = "smartreflex_core"; + reg = <0x5d038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ + clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + smartreflex_core: smartreflex@0 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@60000 { /* 0x4a0e0000, ap 19 1c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + }; + + target-module@74000 { /* 0x4a0f4000, ap 27 24.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mailbox"; + reg = <0x74000 0x4>, + <0x74010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x74000 0x1000>; + + mailbox: mailbox@0 { + compatible = "ti,omap4-mailbox"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; + }; + }; + + target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "spinlock"; + reg = <0x76000 0x4>, + <0x76010 0x4>, + <0x76014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + hwspinlock: spinlock@0 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x0 0x1000>; + #hwlock-cells = <1>; + }; + }; + }; + + segment@100000 { /* 0x4a100000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */ + <0x00001000 0x00101000 0x001000>, /* ap 22 */ + <0x00002000 0x00102000 0x001000>, /* ap 61 */ + <0x00003000 0x00103000 0x001000>, /* ap 62 */ + <0x00008000 0x00108000 0x001000>, /* ap 63 */ + <0x00009000 0x00109000 0x001000>, /* ap 64 */ + <0x0000a000 0x0010a000 0x001000>, /* ap 65 */ + <0x0000b000 0x0010b000 0x001000>; /* ap 66 */ + + target-module@0 { /* 0x4a100000, ap 21 2a.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_pad_core"; + reg = <0x0 0x4>, + <0x10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + omap4_pmx_core: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap4_padconf_global: omap4_padconf_global@5a0 { + compatible = "syscon", + "simple-bus"; + reg = <0x5a0 0x170>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5a0 0x170>; + + pbias_regulator: pbias_regulator@60 { + compatible = "ti,pbias-omap4", "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap4_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap4 { + regulator-name = "pbias_mmc_omap4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; + }; + + target-module@2000 { /* 0x4a102000, ap 61 3c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@8000 { /* 0x4a108000, ap 63 62.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + }; + + target-module@a000 { /* 0x4a10a000, ap 65 50.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "fdif"; + reg = <0xa000 0x4>, + <0xa010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-delay-us = <2>; + /* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */ + clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + /* No child device binding or driver in mainline */ + }; + }; + + segment@180000 { /* 0x4a180000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + segment@200000 { /* 0x4a200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */ + <0x0001f000 0x0021f000 0x001000>, /* ap 32 */ + <0x0000a000 0x0020a000 0x001000>, /* ap 33 */ + <0x0000b000 0x0020b000 0x001000>, /* ap 34 */ + <0x00004000 0x00204000 0x001000>, /* ap 35 */ + <0x00005000 0x00205000 0x001000>, /* ap 36 */ + <0x00006000 0x00206000 0x001000>, /* ap 37 */ + <0x00007000 0x00207000 0x001000>, /* ap 38 */ + <0x00012000 0x00212000 0x001000>, /* ap 39 */ + <0x00013000 0x00213000 0x001000>, /* ap 40 */ + <0x0000c000 0x0020c000 0x001000>, /* ap 41 */ + <0x0000d000 0x0020d000 0x001000>, /* ap 42 */ + <0x00010000 0x00210000 0x001000>, /* ap 43 */ + <0x00011000 0x00211000 0x001000>, /* ap 44 */ + <0x00016000 0x00216000 0x001000>, /* ap 45 */ + <0x00017000 0x00217000 0x001000>, /* ap 46 */ + <0x00014000 0x00214000 0x001000>, /* ap 47 */ + <0x00015000 0x00215000 0x001000>, /* ap 48 */ + <0x00018000 0x00218000 0x001000>, /* ap 49 */ + <0x00019000 0x00219000 0x001000>, /* ap 50 */ + <0x00020000 0x00220000 0x001000>, /* ap 51 */ + <0x00021000 0x00221000 0x001000>, /* ap 52 */ + <0x00026000 0x00226000 0x001000>, /* ap 53 */ + <0x00027000 0x00227000 0x001000>, /* ap 54 */ + <0x00028000 0x00228000 0x001000>, /* ap 55 */ + <0x00029000 0x00229000 0x001000>, /* ap 56 */ + <0x0002a000 0x0022a000 0x001000>, /* ap 57 */ + <0x0002b000 0x0022b000 0x001000>, /* ap 58 */ + <0x0001c000 0x0021c000 0x001000>, /* ap 59 */ + <0x0001d000 0x0021d000 0x001000>; /* ap 60 */ + + target-module@4000 { /* 0x4a204000, ap 35 42.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a206000, ap 37 4a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x1000>; + }; + + target-module@a000 { /* 0x4a20a000, ap 33 2c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + }; + + target-module@c000 { /* 0x4a20c000, ap 41 20.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + }; + + target-module@10000 { /* 0x4a210000, ap 43 52.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000 0x1000>; + }; + + target-module@12000 { /* 0x4a212000, ap 39 18.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x12000 0x1000>; + }; + + target-module@14000 { /* 0x4a214000, ap 47 30.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x14000 0x1000>; + }; + + target-module@16000 { /* 0x4a216000, ap 45 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x16000 0x1000>; + }; + + target-module@18000 { /* 0x4a218000, ap 49 38.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x18000 0x1000>; + }; + + target-module@1c000 { /* 0x4a21c000, ap 59 5a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1c000 0x1000>; + }; + + target-module@1e000 { /* 0x4a21e000, ap 31 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e000 0x1000>; + }; + + target-module@20000 { /* 0x4a220000, ap 51 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + }; + + target-module@26000 { /* 0x4a226000, ap 53 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x1000>; + }; + + target-module@28000 { /* 0x4a228000, ap 55 2e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x28000 0x1000>; + }; + + target-module@2a000 { /* 0x4a22a000, ap 57 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2a000 0x1000>; + }; + }; + + segment@280000 { /* 0x4a280000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + }; + + l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ + <0x00040000 0x00340000 0x001000>, /* ap 68 */ + <0x00020000 0x00320000 0x004000>, /* ap 71 */ + <0x00024000 0x00324000 0x002000>, /* ap 72 */ + <0x00026000 0x00326000 0x001000>, /* ap 73 */ + <0x00027000 0x00327000 0x001000>, /* ap 74 */ + <0x00028000 0x00328000 0x001000>, /* ap 75 */ + <0x00029000 0x00329000 0x001000>, /* ap 76 */ + <0x00030000 0x00330000 0x010000>, /* ap 77 */ + <0x0002a000 0x0032a000 0x002000>, /* ap 90 */ + <0x0002c000 0x0032c000 0x004000>; /* ap 91 */ + + l4_cfg_target_0: target-module@0 { /* 0x4a300000, ap 67 14.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00020000>, + <0x00020000 0x00020000 0x00004000>, + <0x00024000 0x00024000 0x00002000>, + <0x00026000 0x00026000 0x00001000>, + <0x00027000 0x00027000 0x00001000>, + <0x00028000 0x00028000 0x00001000>, + <0x00029000 0x00029000 0x00001000>, + <0x0002a000 0x0002a000 0x00002000>, + <0x0002c000 0x0002c000 0x00004000>, + <0x00030000 0x00030000 0x00010000>; + }; + }; +}; + +&l4_wkup { /* 0x4a300000 */ + compatible = "ti,omap4-l4-wkup", "simple-bus"; + reg = <0x4a300000 0x800>, + <0x4a300800 0x800>, + <0x4a301000 0x1000>; + reg-names = "ap", "la", "ia0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4a300000 0x010000>, /* segment 0 */ + <0x00010000 0x4a310000 0x010000>, /* segment 1 */ + <0x00020000 0x4a320000 0x010000>; /* segment 2 */ + + segment@0 { /* 0x4a300000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x001000>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00006000 0x00006000 0x002000>, /* ap 3 */ + <0x00008000 0x00008000 0x001000>, /* ap 4 */ + <0x0000a000 0x0000a000 0x001000>, /* ap 15 */ + <0x0000b000 0x0000b000 0x001000>, /* ap 16 */ + <0x00004000 0x00004000 0x001000>, /* ap 17 */ + <0x00005000 0x00005000 0x001000>, /* ap 18 */ + <0x0000c000 0x0000c000 0x001000>, /* ap 19 */ + <0x0000d000 0x0000d000 0x001000>; /* ap 20 */ + + target-module@4000 { /* 0x4a304000, ap 17 24.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "counter_32k"; + reg = <0x4000 0x4>, + <0x4004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + counter32k: counter@0 { + compatible = "ti,omap-counter32k"; + reg = <0x0 0x20>; + }; + }; + + target-module@6000 { /* 0x4a306000, ap 3 08.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x2000>; + + prm: prm@0 { + compatible = "ti,omap4-prm"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x2000>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + }; + + target-module@a000 { /* 0x4a30a000, ap 15 34.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xa000 0x4>; + reg-names = "rev"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa000 0x1000>; + + scrm: scrm@0 { + compatible = "ti,omap4-scrm"; + reg = <0x0 0x2000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + }; + + target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_wkup"; + reg = <0xc000 0x4>, + <0xc010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + omap4_scm_wkup: scm@c000 { + compatible = "ti,omap4-scm-wkup"; + reg = <0xc000 0x1000>; + }; + }; + }; + + segment@10000 { /* 0x4a310000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ + <0x00001000 0x00011000 0x001000>, /* ap 6 */ + <0x00004000 0x00014000 0x001000>, /* ap 7 */ + <0x00005000 0x00015000 0x001000>, /* ap 8 */ + <0x00008000 0x00018000 0x001000>, /* ap 9 */ + <0x00009000 0x00019000 0x001000>, /* ap 10 */ + <0x0000c000 0x0001c000 0x001000>, /* ap 11 */ + <0x0000d000 0x0001d000 0x001000>, /* ap 12 */ + <0x0000e000 0x0001e000 0x001000>, /* ap 21 */ + <0x0000f000 0x0001f000 0x001000>; /* ap 22 */ + + gpio1_target: target-module@0 { /* 0x4a310000, ap 5 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio1"; + reg = <0x0 0x4>, + <0x10 0x4>, + <0x114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>, + <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + + gpio1: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + ti,gpio-always-on; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@4000 { /* 0x4a314000, ap 7 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "wd_timer2"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + + wdt2: wdt@0 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@8000 { /* 0x4a318000, ap 9 1c.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer1"; + reg = <0x8000 0x4>, + <0x8010 0x4>, + <0x8014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8000 0x1000>; + + timer1: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-alwon; + }; + }; + + target-module@c000 { /* 0x4a31c000, ap 11 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "kbd"; + reg = <0xc000 0x4>, + <0xc010 0x4>, + <0xc014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc000 0x1000>; + + keypad: keypad@0 { + compatible = "ti,omap4-keypad"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + reg-names = "mpu"; + }; + }; + + target-module@e000 { /* 0x4a31e000, ap 21 30.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "ctrl_module_pad_wkup"; + reg = <0xe000 0x4>, + <0xe010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe000 0x1000>; + + omap4_pmx_wkup: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + }; + }; + + segment@20000 { /* 0x4a320000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ + <0x0000a000 0x0002a000 0x001000>, /* ap 14 */ + <0x00000000 0x00020000 0x001000>, /* ap 23 */ + <0x00001000 0x00021000 0x001000>, /* ap 24 */ + <0x00002000 0x00022000 0x001000>, /* ap 25 */ + <0x00003000 0x00023000 0x001000>, /* ap 26 */ + <0x00004000 0x00024000 0x001000>, /* ap 27 */ + <0x00005000 0x00025000 0x001000>, /* ap 28 */ + <0x00007000 0x00027000 0x000400>, /* ap 29 */ + <0x00008000 0x00028000 0x000800>, /* ap 30 */ + <0x00009000 0x00029000 0x000400>; /* ap 31 */ + + target-module@0 { /* 0x4a320000, ap 23 04.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1000>; + }; + + target-module@2000 { /* 0x4a322000, ap 25 0c.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x1000>; + }; + + target-module@4000 { /* 0x4a324000, ap 27 10.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4000 0x1000>; + }; + + target-module@6000 { /* 0x4a326000, ap 13 28.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00006000 0x00001000>, + <0x00001000 0x00007000 0x00000400>, + <0x00002000 0x00008000 0x00000800>, + <0x00003000 0x00009000 0x00000400>; + }; + }; +}; + +&l4_per { /* 0x48000000 */ + compatible = "ti,omap4-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ + <0x00200000 0x48200000 0x200000>; /* segment 1 */ + + segment@0 { /* 0x48000000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ + <0x00001000 0x00001000 0x000400>, /* ap 1 */ + <0x00000800 0x00000800 0x000800>, /* ap 2 */ + <0x00020000 0x00020000 0x001000>, /* ap 3 */ + <0x00021000 0x00021000 0x001000>, /* ap 4 */ + <0x00032000 0x00032000 0x001000>, /* ap 5 */ + <0x00033000 0x00033000 0x001000>, /* ap 6 */ + <0x00034000 0x00034000 0x001000>, /* ap 7 */ + <0x00035000 0x00035000 0x001000>, /* ap 8 */ + <0x00036000 0x00036000 0x001000>, /* ap 9 */ + <0x00037000 0x00037000 0x001000>, /* ap 10 */ + <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ + <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ + <0x00040000 0x00040000 0x010000>, /* ap 13 */ + <0x00050000 0x00050000 0x001000>, /* ap 14 */ + <0x00055000 0x00055000 0x001000>, /* ap 15 */ + <0x00056000 0x00056000 0x001000>, /* ap 16 */ + <0x00057000 0x00057000 0x001000>, /* ap 17 */ + <0x00058000 0x00058000 0x001000>, /* ap 18 */ + <0x00059000 0x00059000 0x001000>, /* ap 19 */ + <0x0005a000 0x0005a000 0x001000>, /* ap 20 */ + <0x0005b000 0x0005b000 0x001000>, /* ap 21 */ + <0x0005c000 0x0005c000 0x001000>, /* ap 22 */ + <0x0005d000 0x0005d000 0x001000>, /* ap 23 */ + <0x0005e000 0x0005e000 0x001000>, /* ap 24 */ + <0x00060000 0x00060000 0x001000>, /* ap 25 */ + <0x0006a000 0x0006a000 0x001000>, /* ap 26 */ + <0x0006b000 0x0006b000 0x001000>, /* ap 27 */ + <0x0006c000 0x0006c000 0x001000>, /* ap 28 */ + <0x0006d000 0x0006d000 0x001000>, /* ap 29 */ + <0x0006e000 0x0006e000 0x001000>, /* ap 30 */ + <0x0006f000 0x0006f000 0x001000>, /* ap 31 */ + <0x00070000 0x00070000 0x001000>, /* ap 32 */ + <0x00071000 0x00071000 0x001000>, /* ap 33 */ + <0x00072000 0x00072000 0x001000>, /* ap 34 */ + <0x00073000 0x00073000 0x001000>, /* ap 35 */ + <0x00061000 0x00061000 0x001000>, /* ap 36 */ + <0x00096000 0x00096000 0x001000>, /* ap 37 */ + <0x00097000 0x00097000 0x001000>, /* ap 38 */ + <0x00076000 0x00076000 0x001000>, /* ap 39 */ + <0x00077000 0x00077000 0x001000>, /* ap 40 */ + <0x00078000 0x00078000 0x001000>, /* ap 41 */ + <0x00079000 0x00079000 0x001000>, /* ap 42 */ + <0x00086000 0x00086000 0x001000>, /* ap 43 */ + <0x00087000 0x00087000 0x001000>, /* ap 44 */ + <0x00088000 0x00088000 0x001000>, /* ap 45 */ + <0x00089000 0x00089000 0x001000>, /* ap 46 */ + <0x000b0000 0x000b0000 0x001000>, /* ap 47 */ + <0x000b1000 0x000b1000 0x001000>, /* ap 48 */ + <0x00098000 0x00098000 0x001000>, /* ap 49 */ + <0x00099000 0x00099000 0x001000>, /* ap 50 */ + <0x0009a000 0x0009a000 0x001000>, /* ap 51 */ + <0x0009b000 0x0009b000 0x001000>, /* ap 52 */ + <0x0009c000 0x0009c000 0x001000>, /* ap 53 */ + <0x0009d000 0x0009d000 0x001000>, /* ap 54 */ + <0x0009e000 0x0009e000 0x001000>, /* ap 55 */ + <0x0009f000 0x0009f000 0x001000>, /* ap 56 */ + <0x00090000 0x00090000 0x002000>, /* ap 57 */ + <0x00092000 0x00092000 0x001000>, /* ap 58 */ + <0x000a4000 0x000a4000 0x001000>, /* ap 59 */ + <0x000a6000 0x000a6000 0x001000>, /* ap 60 */ + <0x000a8000 0x000a8000 0x004000>, /* ap 61 */ + <0x000ac000 0x000ac000 0x001000>, /* ap 62 */ + <0x000ad000 0x000ad000 0x001000>, /* ap 63 */ + <0x000ae000 0x000ae000 0x001000>, /* ap 64 */ + <0x000b2000 0x000b2000 0x001000>, /* ap 65 */ + <0x000b3000 0x000b3000 0x001000>, /* ap 66 */ + <0x000b4000 0x000b4000 0x001000>, /* ap 67 */ + <0x000b5000 0x000b5000 0x001000>, /* ap 68 */ + <0x000b8000 0x000b8000 0x001000>, /* ap 69 */ + <0x000b9000 0x000b9000 0x001000>, /* ap 70 */ + <0x000ba000 0x000ba000 0x001000>, /* ap 71 */ + <0x000bb000 0x000bb000 0x001000>, /* ap 72 */ + <0x000d1000 0x000d1000 0x001000>, /* ap 73 */ + <0x000d2000 0x000d2000 0x001000>, /* ap 74 */ + <0x000d5000 0x000d5000 0x001000>, /* ap 75 */ + <0x000d6000 0x000d6000 0x001000>, /* ap 76 */ + <0x000a2000 0x000a2000 0x001000>, /* ap 79 */ + <0x000a3000 0x000a3000 0x001000>, /* ap 80 */ + <0x00001400 0x00001400 0x000400>, /* ap 81 */ + <0x00001800 0x00001800 0x000400>, /* ap 82 */ + <0x00001c00 0x00001c00 0x000400>, /* ap 83 */ + <0x000a5000 0x000a5000 0x001000>; /* ap 84 */ + + target-module@20000 { /* 0x48020000, ap 3 06.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart3"; + reg = <0x20050 0x4>, + <0x20054 0x4>, + <0x20058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20000 0x1000>; + + uart3: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@32000 { /* 0x48032000, ap 5 02.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer2"; + reg = <0x32000 0x4>, + <0x32010 0x4>, + <0x32014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x32000 0x1000>; + + timer2: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@34000 { /* 0x48034000, ap 7 04.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer3"; + reg = <0x34000 0x4>, + <0x34010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x34000 0x1000>; + + timer3: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@36000 { /* 0x48036000, ap 9 0e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer4"; + reg = <0x36000 0x4>, + <0x36010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x36000 0x1000>; + + timer4: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@3e000 { /* 0x4803e000, ap 11 08.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer9"; + reg = <0x3e000 0x4>, + <0x3e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x3e000 0x1000>; + + timer9: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@40000 { /* 0x48040000, ap 13 0a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x10000>; + }; + + target-module@55000 { /* 0x48055000, ap 15 0c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio2"; + reg = <0x55000 0x4>, + <0x55010 0x4>, + <0x55114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55000 0x1000>; + + gpio2: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@57000 { /* 0x48057000, ap 17 16.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio3"; + reg = <0x57000 0x4>, + <0x57010 0x4>, + <0x57114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x57000 0x1000>; + + gpio3: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@59000 { /* 0x48059000, ap 19 10.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio4"; + reg = <0x59000 0x4>, + <0x59010 0x4>, + <0x59114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000 0x1000>; + + gpio4: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5b000 { /* 0x4805b000, ap 21 12.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio5"; + reg = <0x5b000 0x4>, + <0x5b010 0x4>, + <0x5b114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5b000 0x1000>; + + gpio5: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@5d000 { /* 0x4805d000, ap 23 14.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "gpio6"; + reg = <0x5d000 0x4>, + <0x5d010 0x4>, + <0x5d114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>, + <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>; + clock-names = "fck", "dbclk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5d000 0x1000>; + + gpio6: gpio@0 { + compatible = "ti,omap4-gpio"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + target-module@60000 { /* 0x48060000, ap 25 1e.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c3"; + reg = <0x60000 0x8>, + <0x60010 0x8>, + <0x60090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x60000 0x1000>; + + i2c3: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@6a000 { /* 0x4806a000, ap 26 18.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart1"; + reg = <0x6a050 0x4>, + <0x6a054 0x4>, + <0x6a058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6a000 0x1000>; + + uart1: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6c000 { /* 0x4806c000, ap 28 20.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart2"; + reg = <0x6c050 0x4>, + <0x6c054 0x4>, + <0x6c058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6c000 0x1000>; + + uart2: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "uart4"; + reg = <0x6e050 0x4>, + <0x6e054 0x4>, + <0x6e058 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6e000 0x1000>; + + uart4: serial@0 { + compatible = "ti,omap4-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + }; + }; + + target-module@70000 { /* 0x48070000, ap 32 28.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c1"; + reg = <0x70000 0x8>, + <0x70010 0x8>, + <0x70090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x70000 0x1000>; + + i2c1: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@72000 { /* 0x48072000, ap 34 30.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c2"; + reg = <0x72000 0x8>, + <0x72010 0x8>, + <0x72090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x72000 0x1000>; + + i2c2: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + target-module@76000 { /* 0x48076000, ap 39 38.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "slimbus2"; + reg = <0x76000 0x4>, + <0x76010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x76000 0x1000>; + + /* No child device binding or driver in mainline */ + }; + + target-module@78000 { /* 0x48078000, ap 41 1a.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "elm"; + reg = <0x78000 0x4>, + <0x78010 0x4>, + <0x78014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x78000 0x1000>; + + elm: elm@0 { + compatible = "ti,am3352-elm"; + reg = <0x0 0x2000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + target-module@86000 { /* 0x48086000, ap 43 24.0 */ + compatible = "ti,sysc-omap2-timer", "ti,sysc"; + ti,hwmods = "timer10"; + reg = <0x86000 0x4>, + <0x86010 0x4>, + <0x86014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x86000 0x1000>; + + timer10: timer@0 { + compatible = "ti,omap3430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@88000 { /* 0x48088000, ap 45 2e.0 */ + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + ti,hwmods = "timer11"; + reg = <0x88000 0x4>, + <0x88010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x88000 0x1000>; + + timer11: timer@0 { + compatible = "ti,omap4430-timer"; + reg = <0x0 0x80>; + clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>; + clock-names = "fck"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + ti,timer-pwm; + }; + }; + + target-module@90000 { /* 0x48090000, ap 57 2a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x90000 0x2000>; + }; + + target-module@96000 { /* 0x48096000, ap 37 26.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "mcbsp4"; + reg = <0x9608c 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x96000 0x1000>; + + mcbsp4: mcbsp@0 { + compatible = "ti,omap4-mcbsp"; + reg = <0x0 0xff>; /* L4 Interconnect */ + reg-names = "mpu"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "common"; + ti,buffer-size = <128>; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + target-module@98000 { /* 0x48098000, ap 49 22.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi1"; + reg = <0x98000 0x4>, + <0x98010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x98000 0x1000>; + + mcspi1: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + }; + + target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi2"; + reg = <0x9a000 0x4>, + <0x9a010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9a000 0x1000>; + + mcspi2: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + }; + + target-module@9c000 { /* 0x4809c000, ap 53 36.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc1"; + reg = <0x9c000 0x4>, + <0x9c010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9c000 0x1000>; + + mmc1: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + pbias-supply = <&pbias_mmc_reg>; + }; + }; + + target-module@9e000 { /* 0x4809e000, ap 55 48.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x9e000 0x1000>; + }; + + target-module@a2000 { /* 0x480a2000, ap 79 3a.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa2000 0x1000>; + }; + + target-module@a4000 { /* 0x480a4000, ap 59 34.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x000a4000 0x00001000>, + <0x00001000 0x000a5000 0x00001000>; + }; + + target-module@a8000 { /* 0x480a8000, ap 61 3e.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xa8000 0x4000>; + }; + + target-module@ad000 { /* 0x480ad000, ap 63 50.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc3"; + reg = <0xad000 0x4>, + <0xad010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xad000 0x1000>; + + mmc3: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b0000 { /* 0x480b0000, ap 47 40.0 */ + compatible = "ti,sysc"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb0000 0x1000>; + }; + + target-module@b2000 { /* 0x480b2000, ap 65 3c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "hdq1w"; + reg = <0xb2000 0x4>, + <0xb2014 0x4>, + <0xb2018 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + ti,no-reset-on-init; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb2000 0x1000>; + + hdqw1w: 1w@0 { + compatible = "ti,omap3-1w"; + reg = <0x0 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + target-module@b4000 { /* 0x480b4000, ap 67 46.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc2"; + reg = <0xb4000 0x4>, + <0xb4010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ + clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb4000 0x1000>; + + mmc2: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + }; + + target-module@b8000 { /* 0x480b8000, ap 69 58.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi3"; + reg = <0xb8000 0x4>, + <0xb8010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xb8000 0x1000>; + + mcspi3: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@ba000 { /* 0x480ba000, ap 71 32.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mcspi4"; + reg = <0xba000 0x4>, + <0xba010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xba000 0x1000>; + + mcspi4: spi@0 { + compatible = "ti,omap4-mcspi"; + reg = <0x0 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + }; + }; + + target-module@d1000 { /* 0x480d1000, ap 73 44.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc4"; + reg = <0xd1000 0x4>, + <0xd1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd1000 0x1000>; + + mmc4: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; + }; + }; + + target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + ti,hwmods = "mmc5"; + reg = <0xd5000 0x4>, + <0xd5010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | + SYSC_OMAP4_SOFTRESET)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd5000 0x1000>; + + mmc5: mmc@0 { + compatible = "ti,omap4-hsmmc"; + reg = <0x0 0x400>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; + }; + }; + }; + + segment@200000 { /* 0x48200000 */ + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */ + <0x00151000 0x00351000 0x001000>; /* ap 78 */ + + target-module@150000 { /* 0x48350000, ap 77 4c.0 */ + compatible = "ti,sysc-omap2", "ti,sysc"; + ti,hwmods = "i2c4"; + reg = <0x150000 0x8>, + <0x150010 0x8>, + <0x150090 0x8>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ + clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x150000 0x1000>; + + i2c4: i2c@0 { + compatible = "ti,omap4-i2c"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 5501d1b4e6cd..27895c1604b9 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -5,6 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <dt-bindings/input/input.h> #include "elpida_ecb240abacn.dtsi" / { @@ -43,6 +44,21 @@ }; }; + gpio_keys: gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = < + &button_pins + >; + + buttonS2 { + label = "button S2"; + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */ + linux,code = <BTN_0>; + wakeup-source; + }; + }; + sound: sound { compatible = "ti,abe-twl6040"; ti,model = "PandaBoard"; @@ -357,6 +373,12 @@ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */ + >; + }; }; &omap4_pmx_wkup { @@ -464,7 +486,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio2>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 940fe4f7c5f6..19d02df8d8a5 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -46,6 +46,12 @@ OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */ >; }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */ + >; + }; }; &led_wkgpio_pins { @@ -68,6 +74,12 @@ }; }; -&gpio1 { +&gpio_keys { + buttonS2 { + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */ + }; +}; + +&gpio1_target { ti,no-reset-on-init; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 280d92d42bf1..490726b52216 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -493,7 +493,7 @@ compatible = "ti,wl1281"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ + interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 1c5f6f35e1cf..878923473023 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -72,7 +72,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio2>; - interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ + interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index e554b6e039f3..1a96d4317c97 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -139,174 +139,13 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - l4_cfg: l4@4a000000 { - compatible = "ti,omap4-l4-cfg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a000000 0x1000000>; - - cm1: cm1@4000 { - compatible = "ti,omap4-cm1", "simple-bus"; - reg = <0x4000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4000 0x2000>; - - cm1_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm1_clockdomains: clockdomains { - }; - }; - - cm2: cm2@8000 { - compatible = "ti,omap4-cm2", "simple-bus"; - reg = <0x8000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x8000 0x2000>; - - cm2_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - cm2_clockdomains: clockdomains { - }; - }; - - omap4_scm_core: scm@2000 { - compatible = "ti,omap4-scm-core", "simple-bus"; - reg = <0x2000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x2000 0x1000>; - ti,hwmods = "ctrl_module_core"; - - scm_conf: scm_conf@0 { - compatible = "syscon"; - reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; - }; - }; - - omap4_padconf_core: scm@100000 { - compatible = "ti,omap4-scm-padconf-core", - "simple-bus"; - reg = <0x100000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x100000 0x1000>; - ti,hwmods = "ctrl_module_pad_core"; - - omap4_pmx_core: pinmux@40 { - compatible = "ti,omap4-padconf", - "pinctrl-single"; - reg = <0x40 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap4_padconf_global: omap4_padconf_global@5a0 { - compatible = "syscon", - "simple-bus"; - reg = <0x5a0 0x170>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x5a0 0x170>; - - pbias_regulator: pbias_regulator@60 { - compatible = "ti,pbias-omap4", "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap4_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap4 { - regulator-name = "pbias_mmc_omap4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; - }; - - l4_wkup: l4@300000 { - compatible = "ti,omap4-l4-wkup", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x300000 0x40000>; - - counter32k: counter@4000 { - compatible = "ti,omap-counter32k"; - reg = <0x4000 0x20>; - ti,hwmods = "counter_32k"; - }; - - prm: prm@6000 { - compatible = "ti,omap4-prm"; - reg = <0x6000 0x2000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x6000 0x2000>; - - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - prm_clockdomains: clockdomains { - }; - }; - - scrm: scrm@a000 { - compatible = "ti,omap4-scrm"; - reg = <0xa000 0x2000>; - - scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; - - scrm_clockdomains: clockdomains { - }; - }; - - omap4_scm_wkup: scm@c000 { - compatible = "ti,omap4-scm-wkup"; - reg = <0xc000 0x1000>; - ti,hwmods = "ctrl_module_wkup"; - }; + l4_wkup: interconnect@4a300000 { + }; - omap4_padconf_wkup: padconf@1e000 { - compatible = "ti,omap4-scm-padconf-wkup", - "simple-bus"; - reg = <0x1e000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x1e000 0x1000>; - ti,hwmods = "ctrl_module_pad_wkup"; + l4_cfg: interconnect@4a000000 { + }; - omap4_pmx_wkup: pinmux@40 { - compatible = "ti,omap4-padconf", - "pinctrl-single"; - reg = <0x40 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - }; - }; + l4_per: interconnect@48000000 { }; ocmcram: ocmcram@40304000 { @@ -314,114 +153,6 @@ reg = <0x40304000 0xa000>; /* 40k */ }; - sdma: dma-controller@4a056000 { - compatible = "ti,omap4430-sdma"; - reg = <0x4a056000 0x1000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <32>; - dma-requests = <127>; - ti,hwmods = "dma_system"; - }; - - gpio1: gpio@4a310000 { - compatible = "ti,omap4-gpio"; - reg = <0x4a310000 0x200>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio1"; - ti,gpio-always-on; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@48055000 { - compatible = "ti,omap4-gpio"; - reg = <0x48055000 0x200>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio2"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@48057000 { - compatible = "ti,omap4-gpio"; - reg = <0x48057000 0x200>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio3"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@48059000 { - compatible = "ti,omap4-gpio"; - reg = <0x48059000 0x200>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio4"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@4805b000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805b000 0x200>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio5"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@4805d000 { - compatible = "ti,omap4-gpio"; - reg = <0x4805d000 0x200>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "gpio6"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - target-module@48076000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "slimbus2"; - reg = <0x48076000 0x4>, - <0x48076010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x48076000 0x001000>; - - /* No child device binding or driver in mainline */ - }; - - elm: elm@48078000 { - compatible = "ti,am3352-elm"; - reg = <0x48078000 0x2000>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "elm"; - status = "disabled"; - }; - gpmc: gpmc@50000000 { compatible = "ti,omap4430-gpmc"; reg = <0x50000000 0x1000>; @@ -442,302 +173,6 @@ #gpio-cells = <2>; }; - uart1: serial@4806a000 { - compatible = "ti,omap4-uart"; - reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart1"; - clock-frequency = <48000000>; - }; - - uart2: serial@4806c000 { - compatible = "ti,omap4-uart"; - reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart2"; - clock-frequency = <48000000>; - }; - - uart3: serial@48020000 { - compatible = "ti,omap4-uart"; - reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart3"; - clock-frequency = <48000000>; - }; - - uart4: serial@4806e000 { - compatible = "ti,omap4-uart"; - reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - - target-module@4a0db000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_iva"; - reg = <0x4a0db038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0db000 0x001000>; - - smartreflex_iva: smartreflex@0 { - compatible = "ti,omap4-smartreflex-iva"; - reg = <0 0x80>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - target-module@4a0dd000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_core"; - reg = <0x4a0dd038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0dd000 0x001000>; - - smartreflex_core: smartreflex@0 { - compatible = "ti,omap4-smartreflex-core"; - reg = <0 0x80>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - target-module@4a0d9000 { - compatible = "ti,sysc-omap4-sr", "ti,sysc"; - ti,hwmods = "smartreflex_mpu"; - reg = <0x4a0d9038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a0d9000 0x001000>; - - smartreflex_mpu: smartreflex@0 { - compatible = "ti,omap4-smartreflex-mpu"; - reg = <0 0x80>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - hwspinlock: spinlock@4a0f6000 { - compatible = "ti,omap4-hwspinlock"; - reg = <0x4a0f6000 0x1000>; - ti,hwmods = "spinlock"; - #hwlock-cells = <1>; - }; - - i2c1: i2c@48070000 { - compatible = "ti,omap4-i2c"; - reg = <0x48070000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c1"; - }; - - i2c2: i2c@48072000 { - compatible = "ti,omap4-i2c"; - reg = <0x48072000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c2"; - }; - - i2c3: i2c@48060000 { - compatible = "ti,omap4-i2c"; - reg = <0x48060000 0x100>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c3"; - }; - - i2c4: i2c@48350000 { - compatible = "ti,omap4-i2c"; - reg = <0x48350000 0x100>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "i2c4"; - }; - - mcspi1: spi@48098000 { - compatible = "ti,omap4-mcspi"; - reg = <0x48098000 0x200>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; - dmas = <&sdma 35>, - <&sdma 36>, - <&sdma 37>, - <&sdma 38>, - <&sdma 39>, - <&sdma 40>, - <&sdma 41>, - <&sdma 42>; - dma-names = "tx0", "rx0", "tx1", "rx1", - "tx2", "rx2", "tx3", "rx3"; - }; - - mcspi2: spi@4809a000 { - compatible = "ti,omap4-mcspi"; - reg = <0x4809a000 0x200>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi2"; - ti,spi-num-cs = <2>; - dmas = <&sdma 43>, - <&sdma 44>, - <&sdma 45>, - <&sdma 46>; - dma-names = "tx0", "rx0", "tx1", "rx1"; - }; - - hdqw1w: 1w@480b2000 { - compatible = "ti,omap3-1w"; - reg = <0x480b2000 0x1000>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "hdq1w"; - }; - - mcspi3: spi@480b8000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480b8000 0x200>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi3"; - ti,spi-num-cs = <2>; - dmas = <&sdma 15>, <&sdma 16>; - dma-names = "tx0", "rx0"; - }; - - mcspi4: spi@480ba000 { - compatible = "ti,omap4-mcspi"; - reg = <0x480ba000 0x200>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "mcspi4"; - ti,spi-num-cs = <1>; - dmas = <&sdma 70>, <&sdma 71>; - dma-names = "tx0", "rx0"; - }; - - mmc1: mmc@4809c000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x4809c000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc1"; - ti,dual-volt; - ti,needs-special-reset; - dmas = <&sdma 61>, <&sdma 62>; - dma-names = "tx", "rx"; - pbias-supply = <&pbias_mmc_reg>; - }; - - mmc2: mmc@480b4000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480b4000 0x400>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc2"; - ti,needs-special-reset; - dmas = <&sdma 47>, <&sdma 48>; - dma-names = "tx", "rx"; - }; - - mmc3: mmc@480ad000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480ad000 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc3"; - ti,needs-special-reset; - dmas = <&sdma 77>, <&sdma 78>; - dma-names = "tx", "rx"; - }; - - mmc4: mmc@480d1000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d1000 0x400>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc4"; - ti,needs-special-reset; - dmas = <&sdma 57>, <&sdma 58>; - dma-names = "tx", "rx"; - }; - - mmc5: mmc@480d5000 { - compatible = "ti,omap4-hsmmc"; - reg = <0x480d5000 0x400>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mmc5"; - ti,needs-special-reset; - dmas = <&sdma 59>, <&sdma 60>; - dma-names = "tx", "rx"; - }; - - hsi: hsi@4a058000 { - compatible = "ti,omap4-hsi"; - reg = <0x4a058000 0x4000>, - <0x4a05c000 0x1000>; - reg-names = "sys", "gdd"; - ti,hwmods = "hsi"; - - clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; - clock-names = "hsi_fck"; - - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gdd_mpu"; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a058000 0x4000>; - - hsi_port1: hsi-port@2000 { - compatible = "ti,omap4-hsi-port"; - reg = <0x2000 0x800>, - <0x2800 0x800>; - reg-names = "tx", "rx"; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - }; - - hsi_port2: hsi-port@3000 { - compatible = "ti,omap4-hsi-port"; - reg = <0x3000 0x800>, - <0x3800 0x800>; - reg-names = "tx", "rx"; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - mmu_dsp: mmu@4a066000 { compatible = "ti,omap4-iommu"; reg = <0x4a066000 0x100>; @@ -779,20 +214,33 @@ #iommu-cells = <0>; ti,iommu-bus-err-back; }; - - wdt2: wdt@4a314000 { - compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - reg = <0x4a314000 0x80>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "wd_timer2"; - }; - - wdt3: wdt@40130000 { - compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - reg = <0x40130000 0x80>, /* MPU private access */ - <0x49030000 0x80>; /* L3 Interconnect */ - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + target-module@40130000 { + compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "wd_timer3"; + reg = <0x40130000 0x4>, + <0x40130010 0x4>, + <0x40130014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | + SYSC_OMAP2_SOFTRESET)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + /* Domains (V, P, C): abe, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x40130000 0x1000>, /* MPU private access */ + <0x49030000 0x49030000 0x0080>; /* L3 Interconnect */ + + wdt3: wdt@0 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x0 0x80>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + }; }; mcpdm: mcpdm@40132000 { @@ -938,28 +386,6 @@ */ }; - mcbsp4: mcbsp@48096000 { - compatible = "ti,omap4-mcbsp"; - reg = <0x48096000 0xff>; /* L4 Interconnect */ - reg-names = "mpu"; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "common"; - ti,buffer-size = <128>; - ti,hwmods = "mcbsp4"; - dmas = <&sdma 31>, - <&sdma 32>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - keypad: keypad@4a31c000 { - compatible = "ti,omap4-keypad"; - reg = <0x4a31c000 0x80>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - reg-names = "mpu"; - ti,hwmods = "kbd"; - }; - dmm@4e000000 { compatible = "ti,omap4-dmm"; reg = <0x4e000000 0x800>; @@ -991,95 +417,6 @@ hw-caps-temp-alert; }; - ocp2scp@4a0ad000 { - compatible = "ti,omap-ocp2scp"; - reg = <0x4a0ad000 0x1f>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - ti,hwmods = "ocp2scp_usb_phy"; - usb2_phy: usb2phy@4a0ad080 { - compatible = "ti,omap-usb2"; - reg = <0x4a0ad080 0x58>; - ctrl-module = <&omap_control_usb2phy>; - clocks = <&usb_phy_cm_clk32k>; - clock-names = "wkupclk"; - #phy-cells = <0>; - }; - }; - - mailbox: mailbox@4a0f4000 { - compatible = "ti,omap4-mailbox"; - reg = <0x4a0f4000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "mailbox"; - #mbox-cells = <1>; - ti,mbox-num-users = <3>; - ti,mbox-num-fifos = <8>; - mbox_ipu: mbox_ipu { - ti,mbox-tx = <0 0 0>; - ti,mbox-rx = <1 0 0>; - }; - mbox_dsp: mbox_dsp { - ti,mbox-tx = <3 0 0>; - ti,mbox-rx = <2 0 0>; - }; - }; - - target-module@4a10a000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "fdif"; - reg = <0x4a10a000 0x4>, - <0x4a10a010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-delay-us = <2>; - clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x4a10a000 0x1000>; - - /* No child device binding or driver in mainline */ - }; - - timer1: timer@4a318000 { - compatible = "ti,omap3430-timer"; - reg = <0x4a318000 0x80>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer1"; - ti,timer-alwon; - clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; - clock-names = "fck"; - }; - - timer2: timer@48032000 { - compatible = "ti,omap3430-timer"; - reg = <0x48032000 0x80>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer2"; - }; - - timer3: timer@48034000 { - compatible = "ti,omap4430-timer"; - reg = <0x48034000 0x80>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer3"; - }; - - timer4: timer@48036000 { - compatible = "ti,omap4430-timer"; - reg = <0x48036000 0x80>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer4"; - }; - timer5: timer@40138000 { compatible = "ti,omap4430-timer"; reg = <0x40138000 0x80>, @@ -1117,92 +454,6 @@ ti,timer-dsp; }; - timer9: timer@4803e000 { - compatible = "ti,omap4430-timer"; - reg = <0x4803e000 0x80>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer9"; - ti,timer-pwm; - }; - - timer10: timer@48086000 { - compatible = "ti,omap3430-timer"; - reg = <0x48086000 0x80>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer10"; - ti,timer-pwm; - }; - - timer11: timer@48088000 { - compatible = "ti,omap4430-timer"; - reg = <0x48088000 0x80>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "timer11"; - ti,timer-pwm; - }; - - usbhstll: usbhstll@4a062000 { - compatible = "ti,usbhs-tll"; - reg = <0x4a062000 0x1000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "usb_tll_hs"; - }; - - usbhshost: usbhshost@4a064000 { - compatible = "ti,usbhs-host"; - reg = <0x4a064000 0x800>; - ti,hwmods = "usb_host_hs"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&init_60m_fclk>, - <&xclk60mhsp1_ck>, - <&xclk60mhsp2_ck>; - clock-names = "refclk_60m_int", - "refclk_60m_ext_p1", - "refclk_60m_ext_p2"; - - usbhsohci: ohci@4a064800 { - compatible = "ti,ohci-omap3"; - reg = <0x4a064800 0x400>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - remote-wakeup-connected; - }; - - usbhsehci: ehci@4a064c00 { - compatible = "ti,ehci-omap"; - reg = <0x4a064c00 0x400>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - omap_control_usb2phy: control-phy@4a002300 { - compatible = "ti,control-phy-usb2"; - reg = <0x4a002300 0x4>; - reg-names = "power"; - }; - - omap_control_usbotg: control-phy@4a00233c { - compatible = "ti,control-phy-otghs"; - reg = <0x4a00233c 0x4>; - reg-names = "otghs_control"; - }; - - usb_otg_hs: usb_otg_hs@4a0ab000 { - compatible = "ti,omap4-musb"; - reg = <0x4a0ab000 0x7ff>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mc", "dma"; - ti,hwmods = "usb_otg_hs"; - usb-phy = <&usb2_phy>; - phys = <&usb2_phy>; - phy-names = "usb2-phy"; - multipoint = <1>; - num-eps = <16>; - ram-bits = <12>; - ctrl-module = <&omap_control_usbotg>; - }; - aes1: aes@4b501000 { compatible = "ti,omap4-aes"; ti,hwmods = "aes1"; @@ -1377,4 +628,5 @@ }; }; +#include "omap4-l4.dtsi" #include "omap44xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index ad97493e4e46..2223dc0d63c0 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -92,4 +92,40 @@ coefficients = <348 (-9301)>; }; +/* Only some L4 CFG interconnect ranges are different on 4460 */ +&l4_cfg_segment_300000 { + ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ + <0x00040000 0x00340000 0x001000>, /* ap 68 */ + <0x00020000 0x00320000 0x004000>, /* ap 71 */ + <0x00024000 0x00324000 0x002000>, /* ap 72 */ + <0x00026000 0x00326000 0x001000>, /* ap 73 */ + <0x00027000 0x00327000 0x001000>, /* ap 74 */ + <0x00028000 0x00328000 0x001000>, /* ap 75 */ + <0x00029000 0x00329000 0x001000>, /* ap 76 */ + <0x00030000 0x00330000 0x010000>, /* ap 77 */ + <0x0002a000 0x0032a000 0x002000>, /* ap 90 */ + <0x0002c000 0x0032c000 0x004000>, /* ap 91 */ + <0x00010000 0x00310000 0x008000>, /* ap 92 */ + <0x00018000 0x00318000 0x004000>, /* ap 93 */ + <0x0001c000 0x0031c000 0x002000>, /* ap 94 */ + <0x0001e000 0x0031e000 0x002000>; /* ap 95 */ +}; + +&l4_cfg_target_0 { + ranges = <0x00000000 0x00000000 0x00010000>, + <0x00010000 0x00010000 0x00008000>, + <0x00018000 0x00018000 0x00004000>, + <0x0001c000 0x0001c000 0x00002000>, + <0x0001e000 0x0001e000 0x00002000>, + <0x00020000 0x00020000 0x00004000>, + <0x00024000 0x00024000 0x00002000>, + <0x00026000 0x00026000 0x00001000>, + <0x00027000 0x00027000 0x00001000>, + <0x00028000 0x00028000 0x00001000>, + <0x00029000 0x00029000 0x00001000>, + <0x0002a000 0x0002a000 0x00002000>, + <0x0002c000 0x0002c000 0x00004000>, + <0x00030000 0x00030000 0x00010000>; +}; + /include/ "omap446x-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 3b2244560c28..ab6f640b282b 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -364,7 +364,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wlcore_irq_pin>; interrupt-parent = <&gpio1>; - interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ + interrupts = <14 IRQ_TYPE_EDGE_RISING>; /* gpio 14 */ ref-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 732b61a0e990..574ac11c0489 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -61,6 +61,20 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1500000 1250000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index e4ebcde17837..a520b4c14ea9 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -141,7 +141,7 @@ interrupts = <30 31>; }; - lcd-controller@40500000 { + lcdc: lcd-controller@40500000 { compatible = "marvell,pxa2xx-lcdc"; reg = <0x44000000 0x10000>; interrupts = <17>; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index 132a3b8ab148..3a8f0edc3af9 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -135,6 +135,7 @@ reg = <0x43100000 90>; interrupts = <45>; clocks = <&clks CLK_NAND>; + clock-names = "core"; dmas = <&pdma 97 3>; dma-names = "data"; #address-cells = <1>; @@ -242,6 +243,38 @@ clocks = <&clks CLK_PWM1>; status = "disabled"; }; + + ssp1: ssp@41000000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41000000 0x40>; + interrupts = <24>; + clocks = <&clks CLK_SSP1>; + status = "disabled"; + }; + + ssp2: ssp@41700000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41700000 0x40>; + interrupts = <16>; + clocks = <&clks CLK_SSP2>; + status = "disabled"; + }; + + ssp3: ssp@41900000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41900000 0x40>; + interrupts = <0>; + clocks = <&clks CLK_SSP3>; + status = "disabled"; + }; + + ssp4: ssp@41a00000 { + compatible = "mrvl,pxa3xx-ssp"; + reg = <0x41a00000 0x40>; + interrupts = <13>; + clocks = <&clks CLK_SSP4>; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 7bcd7635e723..78db67337ed4 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -77,6 +77,14 @@ reg = <0x1>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; cpu@2 { @@ -88,6 +96,14 @@ reg = <0x2>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; cpu@3 { @@ -99,6 +115,14 @@ reg = <0x3>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 1e0a3b446f7a..70790ac242d1 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/qcom,gcc-ipq806x.h> #include <dt-bindings/clock/qcom,lcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { model = "Qualcomm IPQ8064"; @@ -43,7 +44,8 @@ cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 10 0x304>; + interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; }; reserved-memory { @@ -97,7 +99,7 @@ clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; - interrupts = <0 85 1>; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; interrupt-names = "lpass-irq-lpaif"; reg = <0x28100000 0x10000>; reg-names = "lpass-lpaif"; @@ -111,7 +113,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 16 0x4>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; intc: interrupt-controller@2000000 { @@ -125,11 +127,16 @@ timer@200a000 { compatible = "qcom,kpss-timer", "qcom,kpss-wdt-ipq8064", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>, - <1 4 0x301>, - <1 5 0x301>; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; reg = <0x0200a000 0x100>; clock-frequency = <25000000>, <32768>; @@ -177,7 +184,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12490000 0x1000>, <0x12480000 0x1000>; - interrupts = <0 195 0x0>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -186,7 +193,7 @@ i2c@124a0000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; - interrupts = <0 196 0>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; clock-names = "core", "iface"; @@ -215,7 +222,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, <0x16300000 0x1000>; - interrupts = <0 152 0x0>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -224,7 +231,7 @@ i2c@16380000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16380000 0x1000>; - interrupts = <0 153 0>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; clock-names = "core", "iface"; @@ -252,7 +259,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x1a240000 0x1000>, <0x1a200000 0x1000>; - interrupts = <0 154 0x0>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -261,7 +268,7 @@ i2c@1a280000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x1a280000 0x1000>; - interrupts = <0 155 0>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; @@ -274,7 +281,7 @@ spi@1a280000 { compatible = "qcom,spi-qup-v1.1.1"; reg = <0x1a280000 0x1000>; - interrupts = <0 155 0>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; @@ -301,7 +308,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; - interrupts = <0 158 0x0>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -323,7 +330,7 @@ compatible = "qcom,ipq806x-ahci", "generic-ahci"; reg = <0x29000000 0x180>; - interrupts = <0 209 0x0>; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc SFAB_SATA_S_H_CLK>, <&gcc SATA_H_CLK>, diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 4dc0b347b1ee..c2dc9d09484a 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -189,6 +189,8 @@ regulator-max-microvolt = <2950000>; regulator-boot-on; + regulator-system-load = <200000>; + regulator-allow-set-load; }; l21 { diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 5af2a0116ff2..474baa0c7cfc 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Genmai board * * Copyright (C) 2013-14 Renesas Solutions Corp. * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index 779f724b4531..fe1a4aa4d7cb 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the GR-Peach board * * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> * Copyright (C) 2016 Renesas Electronics - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index 5dcaaf131d27..8ee44a100e9a 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the RZ/A1H RSK board * * Copyright (C) 2016 Renesas Electronics - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index a54822e97bac..2211f88ede2a 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r7s72100 SoC * * Copyright (C) 2013-14 Renesas Solutions Corp. * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r7s72100-clock.h> diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 125c39c0222f..d530f451467e 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the APE6EVM board * * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 080d037f5733..dd865f3c2eda 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a73a4 SoC * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Magnus Damm - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a73a4-clock.h> diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 03b00d87b39b..32757caa2584 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the armadillo 800 eva board * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index eb9a911deefb..383cba68dbba 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7740 SoC * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7740-clock.h> diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts index d90eb8464222..327545119ee3 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts index 6aa6b7467704..b683db4da8b1 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZ/G1M Qseven board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi index d364685d9184..0e2e033cc849 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1M-20M Qseven SOM * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7743.dtsi" diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts index 3d918d106593..ca0e0fc9b246 100644 --- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SK-RZG1M board * * Copyright (C) 2016-2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 142949d7066f..24715f74ae08 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7743 SoC * * Copyright (C) 2016-2017 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/interrupt-controller/irq.h> @@ -98,8 +95,17 @@ reg = <1>; clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; + clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7743_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; }; L2_CA15: cache-controller-0 { diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts index d34de8266ccd..2aeebfc9e4f1 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1E SODIMM carrier board + HDMI daughter * board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7745-iwg22d-sodimm.dts" diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index a4058f4cfbcd..1db220cfc1a1 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1E SODIMM carrier board * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi index 29b6e10fdf96..41f111b99a75 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi +++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM * * Copyright (C) 2017 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include "r8a7745.dtsi" diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts index b4d679b04ad6..655b10bb42d5 100644 --- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SK-RZG1E board * * Copyright (C) 2016-2017 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 1cb7a7ab0418..c53f7ff20695 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7745 SoC * * Copyright (C) 2016-2017 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index c85032f9605b..87d32d3e23de 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -7,7 +7,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/clock/r8a77470-cpg-mssr.h> / { compatible = "renesas,r8a77470"; #address-cells = <2>; @@ -22,7 +22,7 @@ compatible = "arm,cortex-a7"; reg = <0>; clock-frequency = <1000000000>; - clocks = <&cpg CPG_CORE 0>; + clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; power-domains = <&sysc 5>; next-level-cache = <&L2_CA7>; }; @@ -209,7 +209,7 @@ reg = <0 0xe6e60000 0 0x40>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 721>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; @@ -225,7 +225,7 @@ reg = <0 0xe6e68000 0 0x40>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 720>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; @@ -241,7 +241,7 @@ reg = <0 0xe6e58000 0 0x40>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 719>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; @@ -257,7 +257,7 @@ reg = <0 0xe6ea8000 0 0x40>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 718>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; @@ -273,7 +273,7 @@ reg = <0 0xe6ee0000 0 0x40>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 715>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; @@ -289,7 +289,7 @@ reg = <0 0xe6ee8000 0 0x40>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 714>, - <&cpg CPG_CORE 5>, <&scif_clk>; + <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index c79d55eb43c5..de808d2ea856 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Reference Device Tree Source for the Bock-W board * @@ -8,10 +9,6 @@ * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 3b49f9ed2e2b..1bce16cc6b20 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Renesas r8a7778 * @@ -8,10 +9,6 @@ * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7778-clock.h> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 4b9006bac3cb..a4d0038363f0 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Marzen board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index e79ae306eedd..6b997bc016ee 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Renesas r8a7779 * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7779-clock.h> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 092610e3f953..50312e752e2f 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Lager board * * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. * Copyright (C) 2015-2016 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 4d06b154bd7e..0925bdca438f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7790 SoC * * Copyright (C) 2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7790-cpg-mssr.h> @@ -79,12 +76,12 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1300000000>; - voltage-tolerance = <1>; /* 1% */ clocks = <&cpg CPG_CORE R8A7790_CLK_Z>; - clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7790_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ /* kHz - uV - OPPs unknown yet */ operating-points = <1400000 1000000>, @@ -104,6 +101,16 @@ power-domains = <&sysc R8A7790_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu2: cpu@2 { @@ -115,6 +122,16 @@ power-domains = <&sysc R8A7790_PD_CA15_CPU2>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu3: cpu@3 { @@ -126,6 +143,16 @@ power-domains = <&sysc R8A7790_PD_CA15_CPU3>; next-level-cache = <&L2_CA15>; capacity-dmips-mhz = <1024>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu4: cpu@100 { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 8ab793d8b2fd..ce22db01fbba 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Koelsch board * * Copyright (C) 2013 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index a01101b49d99..f02036e5de01 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Porter board * * Copyright (C) 2015 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* @@ -375,10 +372,43 @@ clock-frequency = <400000>; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; + + pmic@5a { + compatible = "dlg,da9063l"; + reg = <0x5a>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + + vdd_dvfs: regulator@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + &sata0 { status = "okay"; }; +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + /* composite video input */ &vin0 { status = "okay"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 6e1dd7ad7bd6..991ac6feedd5 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7791 SoC * * Copyright (C) 2013-2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7791-cpg-mssr.h> @@ -78,11 +75,11 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1500000000>; - voltage-tolerance = <1>; /* 1% */ clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; - clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7791_PD_CA15_CPU0>; next-level-cache = <&L2_CA15>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -101,6 +98,16 @@ clocks = <&cpg CPG_CORE R8A7791_CLK_Z>; power-domains = <&sysc R8A7791_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; }; L2_CA15: cache-controller-0 { diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index 04fb70931b3b..f92301290b02 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Blanche board * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts index db01de7a3811..f46f4567b3d4 100644 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Wheat board * * Copyright (C) 2016 Renesas Electronics Corporation * Copyright (C) 2016 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index f44257dd86f6..63a978ec81cc 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7792 SoC * * Copyright (C) 2016 Cogent Embedded Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7792-cpg-mssr.h> diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index aa209f6e5d71..6b2f3a4fd13d 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Gose board * * Copyright (C) 2014-2015 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 4abecfc0ca98..620a570307ff 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7793 SoC * * Copyright (C) 2014-2015 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7793-cpg-mssr.h> @@ -70,10 +67,10 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1500000000>; - voltage-tolerance = <1>; /* 1% */ clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; - clock-latency = <300000>; /* 300 us */ power-domains = <&sysc R8A7793_PD_CA15_CPU0>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ /* kHz - uV - OPPs unknown yet */ operating-points = <1500000 1000000>, @@ -92,6 +89,17 @@ clock-frequency = <1500000000>; clocks = <&cpg CPG_CORE R8A7793_CLK_Z>; power-domains = <&sysc R8A7793_PD_CA15_CPU1>; + voltage-tolerance = <1>; /* 1% */ + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; + next-level-cache = <&L2_CA15>; }; L2_CA15: cache-controller-0 { diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index e17027532941..ef7e2a837df6 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the Alt board * * Copyright (C) 2014 Renesas Electronics Corporation - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 7808aaee6644..daec965889d3 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SILK board * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2014-2015 Renesas Solutions Corp. * Copyright (C) 2014-2015 Cogent Embedded, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 736196903d22..ea2ca4bdaf1c 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the r8a7794 SoC * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2014 Ulrich Hecht - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/r8a7794-cpg-mssr.h> diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi index 238d14bb0ebe..79fce67ebb1c 100644 --- a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi +++ b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Common file for the AA104XD12 panel connected to Renesas R-Car boards * * Copyright (C) 2014 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi index 04aafd479775..6e7589ea7562 100644 --- a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi +++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Common file for the AA121TD01 panel connected to Renesas R-Car boards * * Copyright (C) 2015 Renesas Electronics Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ / { diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts new file mode 100644 index 000000000000..4e57ae2688fc --- /dev/null +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZN1D-DB Board + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + */ + +/dts-v1/; + +#include "r9a06g032.dtsi" + +/ { + model = "RZN1D-DB Board"; + compatible = "renesas,rzn1d400-db", "renesas,r9a06g032"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi new file mode 100644 index 000000000000..afe29c95a006 --- /dev/null +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Base Device Tree Source for the Renesas RZ/N1D (R9A06G032) + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "renesas,r9a06g032"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clocks = <&sysctrl 84>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clocks = <&sysctrl 84>; + enable-method = "renesas,r9a06g032-smp"; + cpu-release-addr = <0 0x4000c204>; + }; + }; + + ext_jtag_clk: extjtagclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + ext_mclk: extmclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <40000000>; + }; + + ext_rgmii_ref: extrgmiiref { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + ext_rtc_clk: extrtcclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + sysctrl: system-controller@4000c000 { + compatible = "renesas,r9a06g032-sysctrl"; + reg = <0x4000c000 0x1000>; + status = "okay"; + #clock-cells = <1>; + + clocks = <&ext_mclk>, <&ext_rtc_clk>, + <&ext_jtag_clk>, <&ext_rgmii_ref>; + clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + }; + + uart0: serial@40060000 { + compatible = "snps,dw-apb-uart"; + reg = <0x40060000 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl 146>; + clock-names = "baudclk"; + status = "disabled"; + }; + + gic: gic@44101000 { + compatible = "arm,cortex-a7-gic", "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x44101000 0x1000>, /* Distributer */ + <0x44102000 0x2000>, /* CPU interface */ + <0x44104000 0x2000>, /* Virt interface control */ + <0x44106000 0x2000>; /* Virt CPU interface */ + interrupts = + <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + timer { + compatible = "arm,cortex-a7-timer", + "arm,armv7-timer"; + interrupt-parent = <&gic>; + arm,cpu-registers-not-fw-configured; + always-on; + interrupts = + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index c0953410121b..2a7e6624efb9 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index e2a0f576946f..0fd19f9723df 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 567a6a725f9c..67f57200d9a0 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index ef1eabf2512c..1c925f20dba0 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index d23ee6d911ac..ce525b956ae5 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014 Romain Perier <romain.perier@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 13e285c53def..b6a8a82d219e 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 PaweÅ‚ Jarosz <paweljarosz3691@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 4d7057a10a4c..cd126b927ba8 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 06523caca27d..2ab3c4b32003 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index 8ba9e06062f3..375129b62102 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 00e05a6662ac..45fd2b302dda 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index aa10caae51c3..aa123f93f181 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index 1be9daacc4f9..5670b33fd1bd 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 73e384585755..4df7accc3ad7 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3229.dtsi b/arch/arm/boot/dts/rk3229.dtsi index 6fe6c15fc13a..cb7d3fad8e60 100644 --- a/arch/arm/boot/dts/rk3229.dtsi +++ b/arch/arm/boot/dts/rk3229.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "rk322x.dtsi" diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index be80e9a2c9af..cd8f2a3b0e91 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -80,6 +42,7 @@ reg = <0xf01>; resets = <&cru SRST_CORE1>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ enable-method = "psci"; }; @@ -89,6 +52,7 @@ reg = <0xf02>; resets = <&cru SRST_CORE2>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ enable-method = "psci"; }; @@ -98,6 +62,7 @@ reg = <0xf03>; resets = <&cru SRST_CORE3>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; /* min followed by max */ enable-method = "psci"; }; }; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index b9418d170502..6592c809e2a5 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; #include "rk3288-evb.dtsi" diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 56c266df01c1..16788209625b 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; #include "rk3288-evb.dtsi" diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 39b61dce97ad..97e4d552ff0f 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> @@ -232,7 +194,7 @@ #address-cells = <1>; #size-cells = <0>; - edp_out_panel: endpoint { + edp_out_panel: endpoint@0 { reg = <0>; remote-endpoint = <&panel_in_edp>; }; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index 41405974253a..b1b56dfdfdba 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 0195d9721660..0f3c29d7fbab 100644 --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index 5f1e336dbaac..f57f286a93c3 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Firefly Rockchip RK3288 Core board * Copyright (c) 2016 Randy Li <ayaka@soulik.info> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index eab176e3dfc3..58ea8bed040a 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Firefly Rockchip RK3288 Core board * Copyright (c) 2016 Randy Li <ayaka@soulik.info> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts index 14271be72f30..556ab42dd81c 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dts +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index b9e6f3a97240..a6ff7eac4aa8 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 4d923aa6ed11..504ab1177aa7 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts index 985743fa134c..7077c3403483 100644 --- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts +++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Phytec PCM-947 carrier board * Copyright (C) 2017 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index aaab2d171ffe..c218dd54c9b5 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device tree file for Phytec phyCORE-RK3288 SoM * Copyright (C) 2017 PHYTEC Messtechnik GmbH * Author: Wadim Egorov <w.egorov@phytec.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/net/ti-dp83867.h> diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index c06d0f4ceb81..596435e03132 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2014, 2015 Andy Yan <andy.yan@rock-chips.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index e95215c9788b..28972fb4e221 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index 51f36a1b698e..50325489c0ce 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/pwm/pwm.h> #include "rk3288.dtsi" diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 8ccc89dbdfaf..6a30cadad88a 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; #include <dt-bindings/input/input.h> diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts index 127488f9f174..ceade5962899 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dts +++ b/arch/arm/boot/dts/rk3288-tinker.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index 280aceae25d5..eaf921694e68 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Google Veyron (and derivatives) fragment for the max98090 audio * codec and analog headphone jack. * * Copyright 2016 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts index ed4255294ad4..5c94a33d695d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Brain Rev 0 board device tree source * * Copyright 2014 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index b16d570ff029..b54746df3661 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron (and derivatives) board device tree source * Chromebook specific parts * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rockchip,rk808.h> @@ -174,7 +137,7 @@ reg = <1>; #address-cells = <1>; #size-cells = <0>; - edp_out_panel: endpoint { + edp_out_panel: endpoint@0 { reg = <0>; remote-endpoint = <&panel_in_edp>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index d33f5763c39c..9d6814c7f285 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Jaq Rev 1+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index cdea751f2a8c..2ba89895c33a 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Jerry Rev 3+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index f0994f0e5774..1e0158acf895 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Mickey Rev 0 board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 4c5307e62001..f95d0c5fcf71 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Minnie Rev 0+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 995cff42fa43..2950aadf49f0 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Pinky Rev 2 board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index 95e9bee8bca2..a4570444cc79 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron (and derivatives) fragment for sdmmc cards * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &io_domains { diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index cc0b78cefe34..e16421d80d22 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron Speedy Rev 1+ board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 6e5bd8974f22..2075120cfc4d 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Veyron (and derivatives) board device tree source * * Copyright 2015 Google, Inc - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/rockchip,rk808.h> @@ -128,22 +91,26 @@ &cpu0 { cpu0-supply = <&vdd_cpu>; - operating-points = < - /* KHz uV */ - 1800000 1400000 - 1704000 1350000 - 1608000 1300000 - 1512000 1250000 - 1416000 1200000 - 1200000 1100000 - 1008000 1050000 - 816000 1000000 - 696000 950000 - 600000 900000 - 408000 900000 - 216000 900000 - 126000 900000 - >; +}; + +/* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */ +&cpu_opp_table { + /delete-node/ opp-312000000; + + opp-1512000000 { + opp-microvolt = <1250000>; + }; + opp-1608000000 { + opp-microvolt = <1300000>; + }; + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <1350000>; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1400000>; + }; }; &emmc { diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index 14c896bfc639..4856a9fc0aea 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index d7e49d29ace5..0840ffb3205c 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -98,21 +60,7 @@ compatible = "arm,cortex-a12"; reg = <0x500>; resets = <&cru SRST_CORE0>; - operating-points = < - /* KHz uV */ - 1608000 1350000 - 1512000 1300000 - 1416000 1200000 - 1200000 1100000 - 1008000 1050000 - 816000 1000000 - 696000 950000 - 600000 900000 - 408000 900000 - 312000 900000 - 216000 900000 - 126000 900000 - >; + operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -122,18 +70,84 @@ compatible = "arm,cortex-a12"; reg = <0x501>; resets = <&cru SRST_CORE1>; + operating-points = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu2: cpu@502 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x502>; resets = <&cru SRST_CORE2>; + operating-points = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; }; cpu3: cpu@503 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x503>; resets = <&cru SRST_CORE3>; + operating-points = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; + }; + }; + + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-126000000 { + opp-hz = /bits/ 64 <126000000>; + opp-microvolt = <900000>; + }; + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-microvolt = <900000>; + }; + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <900000>; + }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <900000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000>; + }; + opp-696000000 { + opp-hz = /bits/ 64 <696000000>; + opp-microvolt = <950000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1000000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1050000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1200000>; + }; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1300000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1350000>; }; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 49584b6a4195..d752dc611fd7 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 70f0106d1252..203d83e3bbf5 100644 --- a/arch/arm/boot/dts/rv1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 76ea24636feb..ed8f6ca52c5b 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -1,42 +1,4 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi new file mode 100644 index 000000000000..575094ea7024 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's S5PV210 based Galaxy Aries board device tree source + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "s5pv210.dtsi" + +/ { + compatible = "samsung,aries", "samsung,s5pv210"; + + aliases { + i2c6 = &i2c_pmic; + i2c9 = &i2c_fuel; + }; + + memory@30000000 { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x10000000 + 0x50000000 0x08000000>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_gpio_rst>; + post-power-on-delay-ms = <500>; + power-off-delay-us = <500>; + }; + + i2c_pmic: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max8998"; + reg = <0x66>; + interrupt-parent = <&gph0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + max8998,pmic-buck1-default-dvs-idx = <1>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>, + <1050000>, <950000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3600000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* Till we get panel driver */ + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_AF_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo13_reg: LDO13 { + regulator-name = "VGA_VDDIO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VGA_DVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_ISP_HOST_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VGA_AVDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* Till we get panel driver */ + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck1_reg: BUCK1 { + regulator-name = "vddarm"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1250000>; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "vddint"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + cp32khz_reg: EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + }; + }; + }; + }; + + i2c_fuel: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + fuelgauge@36 { + compatible = "maxim,max17040"; + interrupt-parent = <&vic0>; + interrupts = <7>; + reg = <0x36>; + }; + }; +}; + +&fimd { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_clk &lcd_data24>; + status = "okay"; + + samsung,invert-vden; + samsung,invert-vclk; + + display-timings { + timing-0 { + /* 480x800@60Hz */ + clock-frequency = <25628040>; + hactive = <480>; + vactive = <800>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vfront-porch = <28>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; +}; + +&hsotg { + vusb_a-supply = <&ldo8_reg>; + vusb_d-supply = <&ldo3_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&pinctrl0 { + wlan_bt_en: wlan-bt-en { + samsung,pins = "gpb-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-val = <1>; + }; + + wlan_gpio_rst: wlan-gpio-rst { + samsung,pins = "gpg1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + + wifi_host_wake: wifi-host-wake { + samsung,pins = "gph2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + tf_detect: tf-detect { + samsung,pins = "gph3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + wifi_wake: wifi-wake { + samsung,pins = "gph3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; +}; + +&sdhci1 { + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + max-frequency = <38400000>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>; + pinctrl-names = "default"; + cap-sd-highspeed; + cap-mmc-highspeed; + + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + status = "okay"; + + wlan@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gph2>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; + vbus-supply = <&safe1_sreg>; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts new file mode 100644 index 000000000000..ccf761b1babf --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "s5pv210-aries.dtsi" + +/ { + model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210"; + compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210"; + + chosen { + stdout-path = &uart2; + /* + * It's hard to change those parameters in stock bootloader, + * since it requires special hardware/cable. + * Let's hardocde bootargs for now, till u-boot port is finished, + * with which it should be easier. + */ + bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "power"; + gpios = <&gph2 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + vol-down { + label = "volume_down"; + gpios = <&gph3 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + vol-up { + label = "volume_up"; + gpios = <&gph3 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts new file mode 100644 index 000000000000..842276749717 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-galaxys.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "s5pv210-aries.dtsi" + +/ { + model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210"; + compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210"; + + chosen { + stdout-path = &uart2; + /* + * It's hard to change those parameters in stock bootloader, + * since it requires special hardware/cable. + * Let's hardocde bootargs for now, till u-boot port is finished, + * with which it should be easier. + */ + bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + nand_pwrseq: nand-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpj2 7 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&massmemory_en>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "power"; + gpios = <&gph2 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + vol-down { + label = "volume_down"; + gpios = <&gph3 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + vol-up { + label = "volume_up"; + gpios = <&gph3 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home { + label = "home"; + gpios = <&gph3 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + wakeup-source; + }; + }; +}; + +&pinctrl0 { + massmemory_en: massmemory-en { + samsung,pins = "gpj2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + mmc-pwrseq = <&nand_pwrseq>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi index 3a79feab11c3..7f0c9d447871 100644 --- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -258,6 +258,8 @@ gph2: gph2 { gpio-controller; #gpio-cells = <2>; + + interrupt-controller; #interrupt-cells = <2>; }; diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h index e57191fb83de..1c01a6f843d8 100644 --- a/arch/arm/boot/dts/sama5d2-pinfunc.h +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -375,7 +375,7 @@ #define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0) #define PIN_PB22__LCDDAT11 PINMUX_PIN(PIN_PB22, 1, 1) #define PIN_PB22__A11 PINMUX_PIN(PIN_PB22, 2, 1) -#define PIN_PB22__TDO PINMUX_PIN(PIN_PB22, 3, 1) +#define PIN_PB22__TD0 PINMUX_PIN(PIN_PB22, 3, 1) #define PIN_PB22__TIOA2 PINMUX_PIN(PIN_PB22, 4, 2) #define PIN_PB22__FLEXCOM3_IO1 PINMUX_PIN(PIN_PB22, 5, 3) #define PIN_PB22__GMDC PINMUX_PIN(PIN_PB22, 6, 3) @@ -556,7 +556,7 @@ #define PIN_PC14__LCDDAT6 PINMUX_PIN(PIN_PC14, 1, 2) #define PIN_PC14__GRX0 PINMUX_PIN(PIN_PC14, 2, 1) #define PIN_PC14__ISC_D5 PINMUX_PIN(PIN_PC14, 3, 1) -#define PIN_PC14__TDO PINMUX_PIN(PIN_PC14, 5, 2) +#define PIN_PC14__TD0 PINMUX_PIN(PIN_PC14, 5, 2) #define PIN_PC14__A3 PINMUX_PIN(PIN_PC14, 6, 2) #define PIN_PC15 79 #define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0) diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index eae5e1ee9cd8..1408fa4a62e4 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -494,7 +494,7 @@ atmel,external-irqs = <47>; }; - pinctrl@fffff200 { + pinctrl: pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; @@ -1340,13 +1340,13 @@ }; }; - rstc@fffffe00 { + reset_controller: rstc@fffffe00 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; clocks = <&clk32k>; }; - shutdown-controller@fffffe10 { + shutdown_controller: shutdown-controller@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; clocks = <&clk32k>; @@ -1359,7 +1359,7 @@ clocks = <&mck>; }; - watchdog@fffffe40 { + watchdog: watchdog@fffffe40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 0cf9beddd556..92a35a1942b6 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -392,7 +392,7 @@ }; pmc: pmc@f0018000 { - compatible = "atmel,sama5d3-pmc", "syscon"; + compatible = "atmel,sama5d4-pmc", "syscon"; reg = <0xf0018000 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 3d65f1f6d78b..daac0c6078c5 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the KZM-A9-GT board * @@ -5,10 +6,6 @@ * * Based on sh73a0-kzm9g.dts * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index c953648a5f41..e8f0a07c4564 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the SH73A0 SoC * * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #include <dt-bindings/clock/sh73a0-clock.h> diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 791ca15c799e..a4dcb68f4322 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -587,6 +587,18 @@ status = "disabled"; }; + spi0: spi@ffda4000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda4000 0x100>; + interrupts = <0 101 4>; + num-cs = <4>; + /*32bit_access;*/ + clocks = <&spi_m_clk>; + status = "disabled"; + }; + spi1: spi@ffda5000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 733678b75b88..fca76a696d9d 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -661,7 +661,6 @@ reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; clocks = <&hclksmc>; status = "okay"; - timings = /bits/ 8 <0 0 0 0x10 0x0a 0>; partition@0 { label = "X-Loader(NAND)"; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index ede77e0f1c41..e35d782e7e5f 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -302,7 +302,7 @@ interrupt-parent = <&exti>; interrupts = <17 1>; interrupt-names = "alarm"; - st,syscfg = <&pwrcfg>; + st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; @@ -310,6 +310,7 @@ compatible = "st,stm32-iwdg"; reg = <0x40003000 0x400>; clocks = <&clk_lsi>; + clock-names = "lsi"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 1479e3eb05fa..f48d06a80d1d 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -297,7 +297,7 @@ interrupt-parent = <&exti>; interrupts = <17 1>; interrupt-names = "alarm"; - st,syscfg = <&pwrcfg>; + st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 4839db146890..c4851271e810 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -157,6 +157,52 @@ }; }; + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -187,6 +233,19 @@ }; }; + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + pwm2_pins_a: pwm2-0 { pins { pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ @@ -281,7 +340,6 @@ pins-are-numbered; interrupt-parent = <&exti>; st,syscfg = <&exti 0x60 0xff>; - status = "disabled"; gpioz: gpio@54004000 { gpio-controller; @@ -305,6 +363,21 @@ slew-rate = <0>; }; }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index ae336530b59b..f77bea49c079 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -49,10 +49,27 @@ }; }; +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + &rng1 { status = "okay"; }; +&rtc { + status = "okay"; +}; + &timers6 { status = "okay"; timer@5 { @@ -60,14 +77,6 @@ }; }; -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; -}; - &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 9382d8063031..372bc2ea6b92 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -17,6 +17,26 @@ aliases { serial0 = &uart4; + ethernet0 = ðernet0; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; @@ -42,6 +62,12 @@ status = "okay"; }; +&m_can1 { + pinctrl-names = "default"; + pinctrl-0 = <&m_can1_pins_a>; + status = "okay"; +}; + &qspi { pinctrl-names = "default"; pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; @@ -67,6 +93,12 @@ }; }; +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + status = "disabled"; +}; + &timers2 { status = "disabled"; pwm { @@ -103,6 +135,19 @@ }; }; +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + &usbphyc { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 7d1753893453..661be948ab74 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -35,20 +35,6 @@ cpu_on = <0x84000003>; }; - aliases { - gpio0 = &gpioa; - gpio1 = &gpiob; - gpio2 = &gpioc; - gpio3 = &gpiod; - gpio4 = &gpioe; - gpio5 = &gpiof; - gpio6 = &gpiog; - gpio7 = &gpioh; - gpio8 = &gpioi; - gpio9 = &gpioj; - gpio10 = &gpiok; - }; - intc: interrupt-controller@a0021000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; @@ -311,6 +297,34 @@ }; }; + spi2: spi@4000b000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI2_K>; + resets = <&rcc SPI2_R>; + dmas = <&dmamux1 39 0x400 0x05>, + <&dmamux1 40 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi3: spi@4000c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI3_K>; + resets = <&rcc SPI3_R>; + dmas = <&dmamux1 61 0x400 0x05>, + <&dmamux1 62 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; @@ -494,6 +508,34 @@ status = "disabled"; }; + spi1: spi@44004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI1_K>; + resets = <&rcc SPI1_R>; + dmas = <&dmamux1 37 0x400 0x05>, + <&dmamux1 38 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi4: spi@44005000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44005000 0x400>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI4_K>; + resets = <&rcc SPI4_R>; + dmas = <&dmamux1 83 0x400 0x05>, + <&dmamux1 84 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + timers15: timer@44006000 { #address-cells = <1>; #size-cells = <0>; @@ -556,6 +598,116 @@ }; }; + spi5: spi@44009000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x44009000 0x400>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI5_K>; + resets = <&rcc SPI5_R>; + dmas = <&dmamux1 85 0x400 0x05>, + <&dmamux1 86 0x400 0x05>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + dfsdm: dfsdm@4400d000 { + compatible = "st,stm32mp1-dfsdm"; + reg = <0x4400d000 0x800>; + clocks = <&rcc DFSDM_K>; + clock-names = "dfsdm"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + dfsdm0: filter@0 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 101 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm1: filter@1 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <1>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 102 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm2: filter@2 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <2>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 103 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm3: filter@3 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <3>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 104 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm4: filter@4 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <4>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 91 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + dfsdm5: filter@5 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <5>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 92 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + }; + + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + dma1: dma@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; @@ -600,6 +752,57 @@ clocks = <&rcc DMAMUX>; }; + adc: adc@48003000 { + compatible = "st,stm32mp1-adc-core"; + reg = <0x48003000 0x400>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc ADC12>, <&rcc ADC12_K>; + clock-names = "bus", "adc"; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + adc1: adc@0 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + interrupt-parent = <&adc>; + interrupts = <0>; + dmas = <&dmamux1 9 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + + adc2: adc@100 { + compatible = "st,stm32mp1-adc"; + #io-channel-cells = <1>; + reg = <0x100>; + interrupt-parent = <&adc>; + interrupts = <1>; + dmas = <&dmamux1 10 0x400 0x01>; + dma-names = "rx"; + status = "disabled"; + }; + }; + + usbotg_hs: usb-otg@49000000 { + compatible = "snps,dwc2"; + reg = <0x49000000 0x10000>; + clocks = <&rcc USBO_K>; + clock-names = "otg"; + resets = <&rcc USBO_R>; + reset-names = "dwc2"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <128 128 64 64 64 64 32 32>; + dr_mode = "otg"; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -614,6 +817,11 @@ reg = <0x5000d000 0x400>; }; + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; + reg = <0x50020000 0x400>; + }; + lptimer2: timer@50021000 { #address-cells = <1>; #size-cells = <0>; @@ -709,6 +917,18 @@ status = "disabled"; }; + hash1: hash@54002000 { + compatible = "st,stm32f756-hash"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc HASH1>; + resets = <&rcc HASH1_R>; + dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0 0x0>; + dma-names = "in"; + dma-maxburst = <2>; + status = "disabled"; + }; + rng1: rng@54003000 { compatible = "st,stm32-rng"; reg = <0x54003000 0x400>; @@ -744,6 +964,36 @@ status = "disabled"; }; + stmmac_axi_config_0: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + ethernet0: ethernet@5800a000 { + compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "syscfg-clk"; + clocks = <&rcc ETHMAC>, + <&rcc ETHTX>, + <&rcc ETHRX>, + <&rcc ETHSTP>, + <&rcc SYSCFG>; + st,syscon = <&syscfg 0x4>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_0>; + snps,tso; + status = "disabled"; + }; + usbh_ohci: usbh-ohci@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; @@ -784,6 +1034,14 @@ status = "disabled"; }; + iwdg2: watchdog@5a002000 { + compatible = "st,stm32mp1-iwdg"; + reg = <0x5a002000 0x400>; + clocks = <&rcc IWDG2>, <&rcc CK_LSI>; + clock-names = "pclk", "lsi"; + status = "disabled"; + }; + usbphyc: usbphyc@5a006000 { #address-cells = <1>; #size-cells = <0>; @@ -812,6 +1070,20 @@ status = "disabled"; }; + spi6: spi@5c001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x5c001000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc SPI6_K>; + resets = <&rcc SPI6_R>; + dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0>, + <&mdma1 35 0x0 0x40002 0x0 0x0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2c4: i2c@5c002000 { compatible = "st,stm32f7-i2c"; reg = <0x5c002000 0x400>; @@ -825,6 +1097,15 @@ status = "disabled"; }; + rtc: rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + clocks = <&rcc RTCAPB>, <&rcc RTC>; + clock-names = "pclk", "rtc_ck"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c6: i2c@5c009000 { compatible = "st,stm32f7-i2c"; reg = <0x5c009000 0x400>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 3a1c6b45c9a1..3d62a8950720 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -190,8 +190,8 @@ #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun4i-a10-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -1001,6 +1001,27 @@ status = "disabled"; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun4i-a10-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <69>, + <70>, + <71>, + <72>, + <73>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pmu"; + clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + fe0: display-frontend@1e00000 { compatible = "allwinner,sun4i-a10-display-frontend"; reg = <0x01e00000 0x20000>; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 07f2248ed5f8..8bfb36651177 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -114,8 +114,8 @@ #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun5i-a13-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -127,12 +127,13 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00000000 0xc000>; - }; - emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; - reg = <0x8000 0x4000>; - status = "disabled"; + emac_sram: sram-section@8000 { + compatible = "allwinner,sun5i-a13-sram-a3-a4", + "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; }; sram_d: sram@10000 { @@ -143,11 +144,26 @@ ranges = <0 0x00010000 0x1000>; otg_sram: sram-section@0 { - compatible = "allwinner,sun4i-a10-sram-d"; + compatible = "allwinner,sun5i-a13-sram-d", + "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun5i-a13-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; dma: dma-controller@1c02000 { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index c72992556a86..debc0bf22ea3 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -119,18 +119,48 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index e529e4ff2174..9c52712af241 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -122,6 +122,19 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1300000 + 720000 1200000 + 528000 1100000 + 312000 1000000 + 144000 1000000 + >; + #cooling-cells = <2>; }; }; @@ -239,8 +252,9 @@ #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun7i-a20-system-control", + "allwinner,sun4i-a10-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -254,7 +268,8 @@ ranges = <0 0x00000000 0xc000>; emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; + compatible = "allwinner,sun7i-a20-sram-a3-a4", + "allwinner,sun4i-a10-sram-a3-a4"; reg = <0x8000 0x4000>; status = "disabled"; }; @@ -268,11 +283,26 @@ ranges = <0 0x00010000 0x1000>; otg_sram: sram-section@0 { - compatible = "allwinner,sun4i-a10-sram-d"; + compatible = "allwinner,sun7i-a20-sram-d", + "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun7i-a20-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; nmi_intc: interrupt-controller@1c00030 { diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 44f3cad3de75..c16ffcc4db7d 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -124,6 +124,28 @@ #size-cells = <1>; ranges; + system-control@1c00000 { + compatible = "allwinner,sun8i-a23-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0x80000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-a23-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-a23-dma"; reg = <0x01c02000 0x1000>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 8d278ee001e9..4e92741b24a7 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -132,21 +132,30 @@ }; cpu@1 { + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 36ecebaff3c0..1c012a4def16 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -79,6 +79,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 3b579d7567c8..c7ce4158d6c8 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -107,6 +107,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &de { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index 88decb0747ac..e5f0645e53a7 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -145,6 +145,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { /* GL830 USB-to-SATA bridge here */ status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 2be23d600957..00a02b037320 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -902,8 +902,6 @@ reset-names = "stmmaceth"; clocks = <&ccu 27>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; mdio: mdio { diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 7d01f9322658..1db2541135a7 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -48,6 +48,23 @@ }; }; + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + + gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ + enable-active-high; + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -55,6 +72,10 @@ }; }; +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index cf1f970b0c6f..5d23667dc2d2 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -123,6 +123,13 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 41d57c76f290..f0096074a467 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -84,21 +84,30 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; @@ -111,6 +120,28 @@ }; soc { + system-control@1c00000 { + compatible = "allwinner,sun8i-h3-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0x80000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-h3-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + mali: gpu@1c40000 { compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; reg = <0x01c40000 0x10000>; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 25fb048c7df2..c39b9169ea64 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -59,6 +59,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -94,6 +105,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -118,6 +133,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -226,6 +251,10 @@ regulator-name = "vcc-wifi"; }; +&tcon_tv0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index bd97ca3dc2fa..ffd9f00f74a4 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -42,8 +42,10 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r40-ccu.h> #include <dt-bindings/reset/sun8i-r40-ccu.h> +#include <dt-bindings/reset/sun8i-de2.h> / { #address-cells = <1>; @@ -99,12 +101,75 @@ }; }; + de: display-engine { + compatible = "allwinner,sun8i-r40-display-engine"; + allwinner,pipelines = <&mixer0>, <&mixer1>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + display_clocks: clock@1000000 { + compatible = "allwinner,sun8i-r40-de2-clk", + "allwinner,sun8i-h3-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-r40-de2-mixer-0"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + mixer0_out_tcon_top: endpoint { + remote-endpoint = <&tcon_top_mixer0_in_mixer0>; + }; + }; + }; + }; + + mixer1: mixer@1200000 { + compatible = "allwinner,sun8i-r40-de2-mixer-1"; + reg = <0x01200000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER1>, + <&display_clocks CLK_MIXER1>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_WB>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer1_out: port@1 { + reg = <1>; + mixer1_out_tcon_top: endpoint { + remote-endpoint = <&tcon_top_mixer1_in_mixer1>; + }; + }; + }; + }; + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; @@ -474,8 +539,6 @@ reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_GMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; gmac_mdio: mdio { @@ -485,6 +548,213 @@ }; }; + tcon_top: tcon-top@1c70000 { + compatible = "allwinner,sun8i-r40-tcon-top"; + reg = <0x01c70000 0x1000>; + clocks = <&ccu CLK_BUS_TCON_TOP>, + <&ccu CLK_TCON_TV0>, + <&ccu CLK_TVE0>, + <&ccu CLK_TCON_TV1>, + <&ccu CLK_TVE1>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", + "tcon-tv0", + "tve0", + "tcon-tv1", + "tve1", + "dsi"; + clock-output-names = "tcon-top-tv0", + "tcon-top-tv1", + "tcon-top-dsi"; + resets = <&ccu RST_BUS_TCON_TOP>; + #clock-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_top_mixer0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon_top>; + }; + }; + + tcon_top_mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_top_mixer0_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer0_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer0_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>; + }; + + tcon_top_mixer0_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer1_in: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tcon_top_mixer1_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon_top>; + }; + }; + + tcon_top_mixer1_out: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tcon_top_mixer1_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer1_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer1_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>; + }; + + tcon_top_mixer1_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>; + }; + }; + + tcon_top_hdmi_in: port@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + tcon_top_hdmi_in_tcon_tv0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_tv0_out_tcon_top>; + }; + + tcon_top_hdmi_in_tcon_tv1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_tv1_out_tcon_top>; + }; + }; + + tcon_top_hdmi_out: port@5 { + reg = <5>; + + tcon_top_hdmi_out_hdmi: endpoint { + remote-endpoint = <&hdmi_in_tcon_top>; + }; + }; + }; + }; + + tcon_tv0: lcd-controller@1c73000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c73000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV0>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_tv0_in_tcon_top_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; + }; + + tcon_tv0_in_tcon_top_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>; + }; + }; + + tcon_tv0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_tv0_out_tcon_top: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; + }; + }; + }; + }; + + tcon_tv1: lcd-controller@1c74000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c74000 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV1>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_tv1_in_tcon_top_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>; + }; + + tcon_tv1_in_tcon_top_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>; + }; + }; + + tcon_tv1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_tv1_out_tcon_top: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>; + }; + }; + }; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, @@ -495,6 +765,51 @@ #interrupt-cells = <3>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + + hdmi: hdmi@1ee0000 { + compatible = "allwinner,sun8i-r40-dw-hdmi", + "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon_top: endpoint { + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun8i-r40-hdmi-phy", + "allwinner,sun50i-a64-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, + <&ccu 7>, <&ccu 16>; + clock-names = "bus", "mod", "pll-0", "pll-1"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; }; timer { diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index c3bff1105e5d..fc6131315c47 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -506,8 +506,6 @@ reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; mdio: mdio { diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi index f7ffdd6658a2..1eadc132390c 100644 --- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi @@ -178,6 +178,15 @@ status = "okay"; }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc_io>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &ohci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index eafff16765b4..1788556b4977 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -23,7 +23,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 7ed7370ee67a..3d3835591cd2 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -28,7 +28,7 @@ }; }; - memory { + memory@80000000 { /* memory >= 0x79600000 is reserved for firmware usage */ reg = <0x80000000 0x79600000>; }; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 7fc4a8b31e45..bfdd1bf61816 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -28,7 +28,7 @@ }; }; - memory { + memory@80000000 { /* memory >= 0x37e00000 is reserved for firmware usage */ reg = <0x80000000 0x37e00000>; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 84c4358dacac..0d7a6327e404 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -5,11 +5,16 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra114"; interrupt-parent = <&lic>; + #address-cells = <1>; + #size-cells = <1>; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x0>; + }; host1x@50000000 { compatible = "nvidia,tegra114-host1x", "simple-bus"; diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index 3455822350c5..573aaa50fff1 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -15,7 +15,7 @@ compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1", "nvidia,tegra124"; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 9f960c84ba10..0f0d4a4988b9 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -50,7 +50,7 @@ model = "Toradex Apalis TK1"; compatible = "toradex,apalis-tk1", "nvidia,tegra124"; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 6dbcf84dafbc..9151b3ebb839 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -24,7 +24,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 3609367037a6..d5f11d6d987e 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -13,7 +13,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 89bcc178994d..82d139648ef1 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 174092bfac90..183c5acafb22 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -7,14 +7,17 @@ #include <dt-bindings/reset/tegra124-car.h> #include <dt-bindings/thermal/tegra124-soctherm.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra124"; interrupt-parent = <&lic>; #address-cells = <2>; #size-cells = <2>; + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x0>; + }; + pcie@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts index 40126388946d..57f16c0e9917 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts @@ -1,10 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "tegra20-colibri-512.dtsi" +#include "tegra20-colibri.dtsi" / { - model = "Toradex Colibri T20 512MB on Iris"; + model = "Toradex Colibri T20 256/512 MB on Iris"; compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20"; aliases { diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi index 5c202b3e3bb1..e7b9ab09908a 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri.dtsi @@ -2,7 +2,7 @@ #include "tegra20.dtsi" / { - model = "Toradex Colibri T20 512MB"; + model = "Toradex Colibri T20 256/512 MB"; compatible = "toradex,colibri_t20-512", "nvidia,tegra20"; aliases { @@ -10,8 +10,13 @@ rtc1 = "/rtc@7000e000"; }; - memory { - reg = <0x00000000 0x20000000>; + memory@0 { + /* + * Set memory to 256 MB to be safe as this could be used on + * 256 or 512 MB module. It is expected from bootloader + * to fix this up for 512 MB version. + */ + reg = <0x00000000 0x10000000>; }; host1x@50000000 { @@ -213,6 +218,22 @@ GPIO_ACTIVE_HIGH>; }; + nand-controller@70008000 { + status = "okay"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <8>; + nand-on-flash-bbt; + nand-ecc-algo = "bch"; + nand-is-boot-medium; + nand-ecc-maximize; + wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; + }; + }; + /* * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier * board) diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 628a55a9318b..1d96d92b72a7 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 30436969adc0..ef245291924f 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -19,7 +19,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 284aae351ff2..f91441683aad 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 872046d48709..20137fc578b1 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -15,7 +15,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index d55c6b240a30..9eb26dc15f6b 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index ee3fbf941e79..f44551e2d9d0 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { reg = <0x00000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 983dd5c14794..15b73bd377f0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -1,14 +1,20 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/clock/tegra20-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/memory/tegra20-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra20"; interrupt-parent = <&lic>; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + device_type = "memory"; + reg = <0 0>; + }; iram@40000000 { compatible = "mmio-sram"; @@ -282,7 +288,8 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ interrupt-names = "sync-token", "bsev", "sxe"; clocks = <&tegra_car TEGRA20_CLK_VDE>; - resets = <&tegra_car 61>; + reset-names = "vde", "mc"; + resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>; }; apbmisc@70000800 { @@ -425,6 +432,21 @@ status = "disabled"; }; + nand-controller@70008000 { + compatible = "nvidia,tegra20-nand"; + reg = <0x70008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA20_CLK_NDFLASH>; + clock-names = "nand"; + resets = <&tegra_car 13>; + reset-names = "nand"; + assigned-clocks = <&tegra_car TEGRA20_CLK_NDFLASH>; + assigned-clock-rates = <150000000>; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; @@ -593,11 +615,12 @@ clock-names = "pclk", "clk32k_in"; }; - memory-controller@7000f000 { + mc: memory-controller@7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; }; iommu@7000f024 { diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index d1d21ec2a844..2f807d40c1b7 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -10,6 +10,10 @@ model = "Toradex Apalis T30"; compatible = "toradex,apalis_t30", "nvidia,tegra30"; + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + pcie@3000 { avdd-pexa-supply = <&vdd2_reg>; vdd-pexa-supply = <&vdd2_reg>; @@ -118,6 +122,7 @@ nvidia,function = "spi4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* CAN_INT2 */ spi2_cs2_n_pw3 { @@ -585,8 +590,6 @@ /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x41>; interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio>; @@ -595,7 +598,7 @@ blocks = <0x5>; irq-trigger = <0x1>; - stmpe_touchscreen@0 { + stmpe_touchscreen { compatible = "st,stmpe-ts"; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index ae52a5039506..b0d40ac8ac6e 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x80000000 0x7ff00000>; }; @@ -1790,9 +1790,6 @@ vccio-supply = <&vdd_5v_in_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - vdd1_reg: vdd1 { regulator-name = "vddio_ddr_1v2"; regulator-min-microvolt = <1200000>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 92a9740c533f..fb9222b479d2 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -40,7 +40,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -206,6 +206,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index c44d8c40c410..526ed71cf7a3 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -10,7 +10,7 @@ model = "Toradex Colibri T30"; compatible = "toradex,colibri_t30", "nvidia,tegra30"; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -351,8 +351,6 @@ /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x41>; interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 09087b9c5e26..a6781f653310 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -5,11 +5,16 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { compatible = "nvidia,tegra30"; interrupt-parent = <&lic>; + #address-cells = <1>; + #size-cells = <1>; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x0>; + }; pcie@3000 { compatible = "nvidia,tegra30-pcie"; @@ -404,7 +409,8 @@ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ interrupt-names = "sync-token", "bsev", "sxe"; clocks = <&tegra_car TEGRA30_CLK_VDE>; - resets = <&tegra_car 61>; + reset-names = "vde", "mc"; + resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>; }; apbmisc@70000800 { @@ -712,6 +718,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; + #reset-cells = <1>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 641d96119d4f..e2d1a22c5950 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -36,6 +36,7 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -46,6 +47,7 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -56,6 +58,7 @@ enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu_opp>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts new file mode 100644 index 000000000000..37777cf22e67 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 CFU1 Board"; + compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + + led-fail { + label = "zii:red:fail"; + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + max-brightness = <1>; + }; + + led-status { + label = "zii:green:status"; + gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + led-debug-a { + label = "zii:green:debug_a"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + led-debug-b { + label = "zii:green:debug_b"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6085"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + reg = <0>; + eeprom-length = <512>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "eth_cu_1000_1"; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_2"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_3"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + label = "nvm"; + }; + + at24c04@54 { + compatible = "atmel,24c04"; + reg = <0x54>; + label = "nameplate"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30fe + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + VF610_PAD_PTE3__GPIO_108 0x31c2 + VF610_PAD_PTE4__GPIO_109 0x31c2 + VF610_PAD_PTE5__GPIO_110 0x31c2 + VF610_PAD_PTE6__GPIO_111 0x31c2 + >; + }; + + pinctrl_switch: switch-grp { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x3061 + VF610_PAD_PTE2__GPIO_107 0x1042 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts new file mode 100644 index 000000000000..fe357668865b --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Device tree file for ZII's SSMB SPU3 board + * + * SSMB - SPU3 Switch Management Board + * SPU - Seat Power Unit + * + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SSMB SPU3 Board"; + compatible = "zii,vf610spu3", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + /* + * Some SPU3s come with SPI-NOR chip DNPed, so we leave this + * node disabled by default and rely on bootloader to enable + * it when appropriate. + */ + status = "disabled"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; + reg = <0>; + eeprom-length = <65536>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_1"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_1000_3"; + }; + + port@4 { + reg = <4>; + label = "eth_cu_1000_4"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_5"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_6"; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio6: pca9505@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "nameplate"; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts index 1a0f631c1d8d..8b9ab9bba23b 100644 --- a/arch/arm/boot/dts/zynq-cc108.dts +++ b/arch/arm/boot/dts/zynq-cc108.dts @@ -12,8 +12,8 @@ /include/ "zynq-7000.dtsi" / { + model = "Xilinx CC108 board"; compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { ethernet0 = &gem0; diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts index aa4a0b6defb8..6ed84fb15902 100644 --- a/arch/arm/boot/dts/zynq-microzed.dts +++ b/arch/arm/boot/dts/zynq-microzed.dts @@ -7,8 +7,8 @@ /include/ "zynq-7000.dtsi" / { - model = "Zynq MicroZED Development Board"; - compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; + model = "Avnet MicroZed board"; + compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index c05f4b67d4c1..54592aeb92b9 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -12,7 +12,7 @@ /include/ "zynq-7000.dtsi" / { - model = "Adapteva Parallella Board"; + model = "Adapteva Parallella board"; compatible = "adapteva,parallella", "xlnx,zynq-7000"; aliases { diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index f2330b0cb63d..cc5a3dc2b4a0 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -7,13 +7,14 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC702 Development Board"; + model = "Xilinx ZC702 board"; compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { @@ -28,8 +29,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; sw14 { label = "sw14"; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 3ad1260ff2a1..77943c16d33f 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -7,13 +7,14 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZC706 Development Board"; + model = "Xilinx ZC706 board"; compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts index 6884f1ad66b7..0e1bfdd3421f 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm010.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM010 board"; compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { ethernet0 = &gem0; diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts index b78883cee96a..b7f65862c022 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm011.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM011 board"; compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts index c3169d63600d..d2359b789eb8 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm012.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm012.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM012 board"; compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { i2c0 = &i2c0; diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts index 8bb66859d774..651913f1afa2 100644 --- a/arch/arm/boot/dts/zynq-zc770-xm013.dts +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts @@ -8,8 +8,8 @@ #include "zynq-7000.dtsi" / { + model = "Xilinx ZC770 XM013 board"; compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; - model = "Xilinx Zynq"; aliases { ethernet0 = &gem1; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 53c6883ce1f6..6a5a93aa6552 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -7,12 +7,13 @@ #include "zynq-7000.dtsi" / { - model = "Zynq Zed Development Board"; - compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; + model = "Avnet ZedBoard board"; + compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts new file mode 100644 index 000000000000..b38704657960 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zturn.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com> + * Copyright (C) 2017 Alexander Graf <agraf@suse.de> + * + * Based on zynq-zed.dts which is: + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + */ + +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq Z-Turn MYIR Board"; + compatible = "myir,zynq-zturn", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + serial1 = &uart0; + mmc0 = &sdhci0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-leds { + compatible = "gpio-leds"; + usr-led1 { + label = "usr-led1"; + gpios = <&gpio0 0x0 0x1>; + default-state = "off"; + }; + + usr-led2 { + label = "usr-led2"; + gpios = <&gpio0 0x9 0x1>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + K1 { + label = "K1"; + gpios = <&gpio0 0x32 0x1>; + linux,code = <0x66>; + gpio-key,wakeup; + autorepeat; + }; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0x0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&can0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + stlm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; + + accelerometer@53 { + compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x"; + reg = <0x53>; + interrupt-parent = <&intc>; + interrupts = <0x0 0x1e 0x4>; + }; +}; diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts index 1e713dc98920..357b78a5c11b 100644 --- a/arch/arm/boot/dts/zynq-zybo-z7.dts +++ b/arch/arm/boot/dts/zynq-zybo-z7.dts @@ -1,9 +1,10 @@ // SPDX-License-Identifier: GPL-2.0+ /dts-v1/; #include "zynq-7000.dtsi" +#include <dt-bindings/gpio/gpio.h> / { - model = "Zynq ZYBO Z7 Development Board"; + model = "Digilent Zybo Z7 board"; compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000"; aliases { @@ -13,7 +14,7 @@ memory@0 { device_type = "memory"; - reg = <0x0 0x20000000>; + reg = <0x0 0x40000000>; }; chosen { @@ -21,10 +22,19 @@ stdout-path = "serial0:115200n8"; }; + gpio-leds { + compatible = "gpio-leds"; + + ld4 { + label = "zynq-zybo-z7:green:ld4"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + }; + usb_phy0: phy0 { #phy-cells = <0>; compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio0 46 1>; + reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index a6c00e7fa767..755f6f109d5a 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -7,12 +7,13 @@ #include "zynq-7000.dtsi" / { - model = "Zynq ZYBO Development Board"; + model = "Digilent Zybo board"; compatible = "digilent,zynq-zybo", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; serial0 = &uart1; + mmc0 = &sdhci0; }; memory@0 { |