diff options
Diffstat (limited to 'arch/arm/boot/dts')
87 files changed, 4404 insertions, 301 deletions
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts new file mode 100644 index 000000000000..29b9f15e7599 --- /dev/null +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -0,0 +1,113 @@ +/* + * aks-cdu.dts - Device Tree file for AK signal CDU + * + * Copyright (C) 2012 AK signal Brno a.s. + * 2012 Jiri Prchal <jiri.prchal@aksignal.cz> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "ge863-pro3.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs"; + }; + + ahb { + apb { + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + usart2: serial@fffb8000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + usart3: serial@fffd0000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 15 0>; + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + ubootenv@c0000 { + label = "ubootenv"; + reg = <0xc0000 0x40000>; + }; + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + rootfs@500000 { + label = "rootfs"; + reg = <0x500000 0x7b00000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + red { + gpios = <&pioC 10 0>; + linux,default-trigger = "none"; + }; + + green { + gpios = <&pioA 5 1>; + linux,default-trigger = "none"; + default-state = "on"; + }; + + yellow { + gpios = <&pioB 20 1>; + linux,default-trigger = "none"; + }; + + blue { + gpios = <&pioB 21 1>; + linux,default-trigger = "none"; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts new file mode 100644 index 000000000000..a9af4db7234c --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts new file mode 100644 index 000000000000..d6a97d9eff72 --- /dev/null +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x EVM"; + compatible = "ti,am335x-evm", "ti,am33xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi new file mode 100644 index 000000000000..59509c48d7e5 --- /dev/null +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -0,0 +1,158 @@ +/* + * Device Tree Source for AM33XX SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,am33xx"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the AM33XX interconnect. + * The real AM33XX interconnect network is quite complex.Since + * that will not bring real advantage to represent that in DT + * for the moment, just use a fake OCP bus entry to represent + * the whole bus hierarchy. + */ + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + intc: interrupt-controller@48200000 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <128>; + reg = <0x48200000 0x1000>; + }; + + gpio1: gpio@44e07000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@4804C000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@481AC000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@481AE000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@44E09000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@48022000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@48024000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + + uart4: serial@481A6000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + + uart5: serial@481A8000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + }; + + uart6: serial@481AA000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + }; + + i2c1: i2c@44E0B000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@4802A000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@4819C000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; + }; +}; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts new file mode 100644 index 000000000000..474f760ecadf --- /dev/null +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI AM3517 EVM (AM3517/05)"; + compatible = "ti,am3517-evm", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; + +&i2c1 { + clock-frequency = <400000>; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts new file mode 100644 index 000000000000..fffd5c2a3041 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -0,0 +1,42 @@ +/* + * Device Tree file for Marvell Armada 370 evaluation board + * (DB-88F6710-BP-DDR3) + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-370.dtsi" + +/ { + model = "Marvell Armada 370 Evaluation Board"; + compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + serial@d0012000 { + clock-frequency = <200000000>; + status = "okay"; + }; + timer@d0020300 { + clock-frequency = <600000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi new file mode 100644 index 000000000000..6b6b932a5a7d --- /dev/null +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -0,0 +1,68 @@ +/* + * Device Tree Include file for Marvell Armada 370 and Armada XP SoC + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Ben Dooks <ben.dooks@codethink.co.uk> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are common to the Armada + * 370 and Armada XP SoC. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell Armada 370 and XP SoC"; + compatible = "marvell,armada_370_xp"; + + cpus { + cpu@0 { + compatible = "marvell,sheeva-v7"; + }; + }; + + mpic: interrupt-controller@d0020000 { + compatible = "marvell,mpic"; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&mpic>; + ranges; + + serial@d0012000 { + compatible = "ns16550"; + reg = <0xd0012000 0x100>; + reg-shift = <2>; + interrupts = <41>; + status = "disabled"; + }; + serial@d0012100 { + compatible = "ns16550"; + reg = <0xd0012100 0x100>; + reg-shift = <2>; + interrupts = <42>; + status = "disabled"; + }; + + timer@d0020300 { + compatible = "marvell,armada-370-xp-timer"; + reg = <0xd0020300 0x30>; + interrupts = <37>, <38>, <39>, <40>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi new file mode 100644 index 000000000000..3228ccc83332 --- /dev/null +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -0,0 +1,35 @@ +/* + * Device Tree Include file for Marvell Armada 370 family SoC + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada 370 SoC that are not + * common to all Armada SoCs. + */ + +/include/ "armada-370-xp.dtsi" + +/ { + model = "Marvell Armada 370 family SoC"; + compatible = "marvell,armada370", "marvell,armada-370-xp"; + + mpic: interrupt-controller@d0020000 { + reg = <0xd0020a00 0x1d0>, + <0xd0021870 0x58>; + }; + + soc { + system-controller@d0018200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0xd0018200 0x100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts new file mode 100644 index 000000000000..f97040d4258d --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -0,0 +1,50 @@ +/* + * Device Tree file for Marvell Armada XP evaluation board + * (DB-78460-BP) + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP Evaluation Board"; + compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + serial@d0012000 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012100 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012300 { + clock-frequency = <250000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi new file mode 100644 index 000000000000..e1fa7e6edfe8 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -0,0 +1,55 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Ben Dooks <ben.dooks@codethink.co.uk> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada 370 SoC that are not + * common to all Armada SoCs. + */ + +/include/ "armada-370-xp.dtsi" + +/ { + model = "Marvell Armada XP family SoC"; + compatible = "marvell,armadaxp", "marvell,armada-370-xp"; + + mpic: interrupt-controller@d0020000 { + reg = <0xd0020a00 0x1d0>, + <0xd0021870 0x58>; + }; + + soc { + serial@d0012200 { + compatible = "ns16550"; + reg = <0xd0012200 0x100>; + reg-shift = <2>; + interrupts = <43>; + status = "disabled"; + }; + serial@d0012300 { + compatible = "ns16550"; + reg = <0xd0012300 0x100>; + reg-shift = <2>; + interrupts = <44>; + status = "disabled"; + }; + + timer@d0020300 { + marvell,timer-25Mhz; + }; + + system-controller@d0018200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0xd0018200 0x500>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index f449efc9825f..66389c1c6f62 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -52,10 +52,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <29 30 31>; }; ramc0: ramc@ffffea00 { @@ -81,25 +82,25 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 18 4 19 4>; + interrupts = <17 4 0 18 4 0 19 4 0>; }; tcb1: timer@fffdc000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; - interrupts = <26 4 27 4 28 4>; + interrupts = <26 4 0 27 4 0 28 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -108,7 +109,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,14 +127,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -142,7 +143,7 @@ usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -151,7 +152,7 @@ usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -160,7 +161,7 @@ usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23 4>; + interrupts = <23 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,7 +170,7 @@ usart4: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24 4>; + interrupts = <24 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -178,7 +179,7 @@ usart5: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25 4>; + interrupts = <25 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -187,21 +188,21 @@ macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21 4>; + interrupts = <21 4 3>; status = "disabled"; }; usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; - interrupts = <10 4>; + interrupts = <10 4 2>; status = "disabled"; }; adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; - interrupts = <5 4>; + interrupts = <5 4 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -253,7 +254,7 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; - interrupts = <20 4>; + interrupts = <20 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 0209913a65a2..b460d6ce9eb5 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -48,10 +48,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <30 31>; }; pmc: pmc@fffffc00 { @@ -68,13 +69,13 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <19 4>; + interrupts = <19 4 0>; }; rstc@fffffd00 { @@ -90,7 +91,7 @@ pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -99,7 +100,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -108,7 +109,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,7 +127,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -135,14 +136,14 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -151,7 +152,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -160,7 +161,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4>; + interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,14 +170,14 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <21 4>; + interrupts = <21 4 3>; status = "disabled"; }; usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; - interrupts = <24 4>; + interrupts = <24 4 2>; status = "disabled"; }; }; @@ -200,7 +201,7 @@ usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; - interrupts = <29 4>; + interrupts = <29 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 7dbccaf199f7..bafa8806fc17 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -53,10 +53,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe400 { @@ -78,7 +79,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; @@ -90,25 +91,25 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 4>; + interrupts = <18 4 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 4>; + interrupts = <18 4 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 0>; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,7 +127,7 @@ pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -135,7 +136,7 @@ pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <5 4>; + interrupts = <5 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -144,7 +145,7 @@ pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <5 4>; + interrupts = <5 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -153,14 +154,14 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,7 +170,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -178,7 +179,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4>; + interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -187,7 +188,7 @@ usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 4>; + interrupts = <10 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -196,14 +197,14 @@ macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 4>; + interrupts = <25 4 3>; status = "disabled"; }; adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 4>; + interrupts = <20 4 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -257,14 +258,14 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index cb84de791b5a..bfac0dfc332c 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -50,7 +50,7 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; @@ -74,7 +74,7 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; shdwc@fffffe10 { @@ -85,25 +85,25 @@ tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4>; + interrupts = <20 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -112,7 +112,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -121,7 +121,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -130,7 +130,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -139,14 +139,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; - interrupts = <5 4>; + interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -155,7 +155,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -164,7 +164,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -173,7 +173,7 @@ usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -201,7 +201,7 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 6b3ef4339ae7..4a18c393b136 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -51,10 +51,11 @@ ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { @@ -80,37 +81,37 @@ pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4>; + interrupts = <20 4 0>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -119,7 +120,7 @@ pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -128,7 +129,7 @@ pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -137,7 +138,7 @@ pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -146,14 +147,14 @@ dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4>; + interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -162,7 +163,7 @@ usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -171,7 +172,7 @@ usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -180,21 +181,21 @@ macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <24 4>; + interrupts = <24 4 3>; status = "disabled"; }; macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; - interrupts = <27 4>; + interrupts = <27 4 3>; status = "disabled"; }; adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4>; + interrupts = <19 4 0>; atmel,adc-use-external; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -248,14 +249,14 @@ usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index 4ad5160018cb..3180a9c588b9 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -48,7 +48,7 @@ }; rtc@80154000 { - compatible = "stericsson,db8500-rtc"; + compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; interrupts = <0 18 0x4>; }; @@ -60,7 +60,7 @@ interrupts = <0 119 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <0>; @@ -73,7 +73,7 @@ interrupts = <0 120 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <1>; @@ -86,7 +86,7 @@ interrupts = <0 121 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <2>; @@ -99,7 +99,7 @@ interrupts = <0 122 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <3>; @@ -112,7 +112,7 @@ interrupts = <0 123 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <4>; @@ -125,7 +125,7 @@ interrupts = <0 124 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <5>; @@ -138,7 +138,7 @@ interrupts = <0 125 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <6>; @@ -151,7 +151,7 @@ interrupts = <0 126 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <7>; @@ -164,7 +164,7 @@ interrupts = <0 127 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <8>; @@ -206,62 +206,74 @@ // DB8500_REGULATOR_VAPE db8500_vape_reg: db8500_vape { + regulator-compatible = "db8500_vape"; regulator-name = "db8500-vape"; regulator-always-on; }; // DB8500_REGULATOR_VARM db8500_varm_reg: db8500_varm { + regulator-compatible = "db8500_varm"; regulator-name = "db8500-varm"; }; // DB8500_REGULATOR_VMODEM db8500_vmodem_reg: db8500_vmodem { + regulator-compatible = "db8500_vmodem"; regulator-name = "db8500-vmodem"; }; // DB8500_REGULATOR_VPLL db8500_vpll_reg: db8500_vpll { + regulator-compatible = "db8500_vpll"; regulator-name = "db8500-vpll"; }; // DB8500_REGULATOR_VSMPS1 db8500_vsmps1_reg: db8500_vsmps1 { + regulator-compatible = "db8500_vsmps1"; regulator-name = "db8500-vsmps1"; }; // DB8500_REGULATOR_VSMPS2 db8500_vsmps2_reg: db8500_vsmps2 { + regulator-compatible = "db8500_vsmps2"; regulator-name = "db8500-vsmps2"; }; // DB8500_REGULATOR_VSMPS3 db8500_vsmps3_reg: db8500_vsmps3 { + regulator-compatible = "db8500_vsmps3"; regulator-name = "db8500-vsmps3"; }; // DB8500_REGULATOR_VRF1 db8500_vrf1_reg: db8500_vrf1 { + regulator-compatible = "db8500_vrf1"; regulator-name = "db8500-vrf1"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSP db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-compatible = "db8500_sva_mmdsp"; regulator-name = "db8500-sva-mmdsp"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSPRET db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-compatible = "db8500_sva_mmdsp_ret"; regulator-name = "db8500-sva-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SVAPIPE db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-compatible = "db8500_sva_pipe"; regulator-name = "db8500_sva_pipe"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSP db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-compatible = "db8500_sia_mmdsp"; regulator-name = "db8500_sia_mmdsp"; }; @@ -272,38 +284,45 @@ // DB8500_REGULATOR_SWITCH_SIAPIPE db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-compatible = "db8500_sia_pipe"; regulator-name = "db8500-sia-pipe"; }; // DB8500_REGULATOR_SWITCH_SGA db8500_sga_reg: db8500_sga { + regulator-compatible = "db8500_sga"; regulator-name = "db8500-sga"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_B2R2_MCDE db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-compatible = "db8500_b2r2_mcde"; regulator-name = "db8500-b2r2-mcde"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_ESRAM12 db8500_esram12_reg: db8500_esram12 { + regulator-compatible = "db8500_esram12"; regulator-name = "db8500-esram12"; }; // DB8500_REGULATOR_SWITCH_ESRAM12RET db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-compatible = "db8500_esram12_ret"; regulator-name = "db8500-esram12-ret"; }; // DB8500_REGULATOR_SWITCH_ESRAM34 db8500_esram34_reg: db8500_esram34 { + regulator-compatible = "db8500_esram34"; regulator-name = "db8500-esram34"; }; // DB8500_REGULATOR_SWITCH_ESRAM34RET db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-compatible = "db8500_esram34_ret"; regulator-name = "db8500-esram34-ret"; }; }; @@ -312,12 +331,70 @@ compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ interrupts = <0 40 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + + ab8500-rtc { + compatible = "stericsson,ab8500-rtc"; + interrupts = <17 0x4 + 18 0x4>; + interrupt-names = "60S", "ALARM"; + }; + + ab8500-gpadc { + compatible = "stericsson,ab8500-gpadc"; + interrupts = <32 0x4 + 39 0x4>; + interrupt-names = "HW_CONV_END", "SW_CONV_END"; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + }; + + ab8500-usb { + compatible = "stericsson,ab8500-usb"; + interrupts = < 90 0x4 + 96 0x4 + 14 0x4 + 15 0x4 + 79 0x4 + 74 0x4 + 75 0x4>; + interrupt-names = "ID_WAKEUP_R", + "ID_WAKEUP_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_ADP_PROBE_PLUG", + "USB_ADP_PROBE_UNPLUG"; + vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; + v-ape-supply = <&db8500_vape_reg>; + musb_1v8-supply = <&db8500_vsmps2_reg>; + }; + + ab8500-ponkey { + compatible = "stericsson,ab8500-ponkey"; + interrupts = <6 0x4 + 7 0x4>; + interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; + }; + + ab8500-sysctrl { + compatible = "stericsson,ab8500-sysctrl"; + }; + + ab8500-pwm { + compatible = "stericsson,ab8500-pwm"; + }; + + ab8500-debugfs { + compatible = "stericsson,ab8500-debug"; + }; ab8500-regulators { compatible = "stericsson,ab8500-regulator"; // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-compatible = "ab8500_ldo_aux1"; regulator-name = "V-DISPLAY"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2900000>; @@ -328,6 +405,7 @@ // supplies to the on-board eMMC ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-compatible = "ab8500_ldo_aux2"; regulator-name = "V-eMMC1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; @@ -335,6 +413,7 @@ // supply for VAUX3; SDcard slots ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-compatible = "ab8500_ldo_aux3"; regulator-name = "V-MMC-SD"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; @@ -342,41 +421,49 @@ // supply for v-intcore12; VINTCORE12 LDO ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-compatible = "ab8500_ldo_initcore"; regulator-name = "V-INTCORE"; }; // supply for tvout; gpadc; TVOUT LDO ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-compatible = "ab8500_ldo_tvout"; regulator-name = "V-TVOUT"; }; // supply for ab8500-usb; USB LDO ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-compatible = "ab8500_ldo_usb"; regulator-name = "dummy"; }; // supply for ab8500-vaudio; VAUDIO LDO ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-compatible = "ab8500_ldo_audio"; regulator-name = "V-AUD"; }; // supply for v-anamic1 VAMic1-LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-compatible = "ab8500_ldo_anamic1"; regulator-name = "V-AMIC1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-compatible = "ab8500_ldo_amamic2"; regulator-name = "V-AMIC2"; }; // supply for v-dmic; VDMIC LDO ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-compatible = "ab8500_ldo_dmic"; regulator-name = "V-DMIC"; }; // supply for U8500 CSI/DSI; VANA LDO ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-compatible = "ab8500_ldo_ana"; regulator-name = "V-CSI/DSI"; }; }; diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts new file mode 100644 index 000000000000..d79b28d9c963 --- /dev/null +++ b/arch/arm/boot/dts/ea3250.dts @@ -0,0 +1,174 @@ +/* + * Embedded Artists LPC3250 board + * + * Copyright 2012 Roland Stigge <stigge@antcom.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "lpc32xx.dtsi" + +/ { + model = "Embedded Artists LPC3250 board based on NXP LPC3250"; + compatible = "ea,ea3250", "nxp,lpc3250"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0 0x4000000>; + }; + + ahb { + mac: ethernet@31060000 { + phy-mode = "rmii"; + use-iram; + }; + + /* Here, choose exactly one from: ohci, usbd */ + ohci@31020000 { + transceiver = <&isp1301>; + status = "okay"; + }; + +/* + usbd@31020000 { + transceiver = <&isp1301>; + status = "okay"; + }; +*/ + + /* 128MB Flash via SLC NAND controller */ + slc: flash@20020000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + nxp,wdr-clks = <14>; + nxp,wwidth = <260000000>; + nxp,whold = <104000000>; + nxp,wsetup = <200000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <34666666>; + nxp,rhold = <104000000>; + nxp,rsetup = <200000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + mtd0@00000000 { + label = "ea3250-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + mtd1@00080000 { + label = "ea3250-uboot"; + reg = <0x00080000 0x000c0000>; + read-only; + }; + + mtd2@00140000 { + label = "ea3250-kernel"; + reg = <0x00140000 0x00400000>; + }; + + mtd3@00540000 { + label = "ea3250-rootfs"; + reg = <0x00540000 0x07ac0000>; + }; + }; + + apb { + uart5: serial@40090000 { + status = "okay"; + }; + + uart3: serial@40080000 { + status = "okay"; + }; + + uart6: serial@40098000 { + status = "okay"; + }; + + i2c1: i2c@400A0000 { + clock-frequency = <100000>; + + eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; + + eeprom@57 { + compatible = "at,24c64"; + reg = <0x57>; + }; + + uda1380: uda1380@18 { + compatible = "nxp,uda1380"; + reg = <0x18>; + power-gpio = <&gpio 0x59 0>; + reset-gpio = <&gpio 0x51 0>; + dac-clk = "wspll"; + }; + + pca9532: pca9532@60 { + compatible = "nxp,pca9532"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x60>; + }; + }; + + i2c2: i2c@400A8000 { + clock-frequency = <100000>; + }; + + i2cusb: i2c@31020300 { + clock-frequency = <100000>; + + isp1301: usb-transceiver@2d { + compatible = "nxp,isp1301"; + reg = <0x2d>; + }; + }; + + sd@20098000 { + wp-gpios = <&pca9532 5 0>; + cd-gpios = <&pca9532 4 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; + }; + }; + + fab { + uart1: serial@40014000 { + status = "okay"; + }; + + /* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */ + adc@40048000 { + status = "okay"; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@21 { + label = "GPIO Key UP"; + linux,code = <103>; + gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ + }; + }; +}; diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts new file mode 100644 index 000000000000..b7354e6506de --- /dev/null +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -0,0 +1,41 @@ +/* + * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3 + * + * Copyright (C) 2012 Telit, + * 2012 Fabio Porcedda <fabio.porcedda@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "ge863-pro3.dtsi" + +/ { + model = "Telit EVK-PRO3 for Telit GE863-PRO3"; + compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + i2c@0 { + status = "okay"; + }; + +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index b8c476384eef..0c49caa09978 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -134,4 +134,16 @@ i2c@138D0000 { status = "disabled"; }; + + spi_0: spi@13920000 { + status = "disabled"; + }; + + spi_1: spi@13930000 { + status = "disabled"; + }; + + spi_2: spi@13940000 { + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 27afc8e535ca..1beccc8f14ff 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -179,4 +179,42 @@ i2c@138D0000 { status = "disabled"; }; + + spi_0: spi@13920000 { + status = "disabled"; + }; + + spi_1: spi@13930000 { + status = "disabled"; + }; + + spi_2: spi@13940000 { + gpios = <&gpc1 1 5 3 0>, + <&gpc1 3 5 3 0>, + <&gpc1 4 5 3 0>; + + w25x80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + cs-gpio = <&gpc1 2 1 0 3>; + samsung,spi-feedback-delay = <0>; + }; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index a1dd2ee83753..02891fe876e4 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -25,6 +25,12 @@ compatible = "samsung,exynos4210"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + gic:interrupt-controller@10490000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -33,6 +39,17 @@ reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; + watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; @@ -147,6 +164,36 @@ interrupts = <0 65 0>; }; + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 7>; /* preliminary */ + rx-dma-channel = <&pdma0 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 67 0>; + tx-dma-channel = <&pdma1 7>; /* preliminary */ + rx-dma-channel = <&pdma1 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_2: spi@13940000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13940000 0x100>; + interrupts = <0 68 0>; + tx-dma-channel = <&pdma0 9>; /* preliminary */ + rx-dma-channel = <&pdma0 8>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 49945cc1bc7d..8a5e348793c7 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -71,4 +71,42 @@ i2c@12CD0000 { status = "disabled"; }; + + spi_0: spi@12d20000 { + status = "disabled"; + }; + + spi_1: spi@12d30000 { + gpios = <&gpa2 4 2 3 0>, + <&gpa2 6 2 3 0>, + <&gpa2 7 2 3 0>; + + w25q80bw@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + cs-gpio = <&gpa2 5 1 0 3>; + samsung,spi-feedback-delay = <0>; + }; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; + }; + }; + }; + + spi_2: spi@12d40000 { + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 4272b2949228..004aaa8d123c 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -23,6 +23,12 @@ compatible = "samsung,exynos5250"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + gic:interrupt-controller@10481000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -146,6 +152,36 @@ #size-cells = <0>; }; + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d20000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 5>; /* preliminary */ + rx-dma-channel = <&pdma0 4>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_1: spi@12d30000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d30000 0x100>; + interrupts = <0 67 0>; + tx-dma-channel = <&pdma1 5>; /* preliminary */ + rx-dma-channel = <&pdma1 4>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_2: spi@12d40000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d40000 0x100>; + interrupts = <0 68 0>; + tx-dma-channel = <&pdma0 7>; /* preliminary */ + rx-dma-channel = <&pdma0 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi new file mode 100644 index 000000000000..17136fc7a516 --- /dev/null +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -0,0 +1,52 @@ +/* + * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3 + * + * Copyright (C) 2012 Telit, + * 2012 Fabio Porcedda <fabio.porcedda@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "at91sam9260.dtsi" + +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <6000000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + boot@0 { + label = "boot"; + reg = <0x0 0x7c0000>; + }; + + root@07c0000 { + label = "root"; + reg = <0x7c0000 0x7840000>; + }; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs"; + }; +}; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 70bffa929b65..e3486f486b40 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -22,17 +22,60 @@ apb@80000000 { apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>; + status = "okay"; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>; - bus-width = <8>; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; wp-gpios = <&gpio1 30 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */ + 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ + 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a>; + panel-enable-gpios = <&gpio1 18 0>; status = "okay"; }; }; apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + duart: serial@80070000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; @@ -40,4 +83,23 @@ }; }; }; + + regulators { + compatible = "simple-bus"; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts new file mode 100644 index 000000000000..20912b1d8893 --- /dev/null +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "i.MX23 Olinuxino Low Cost Board"; + compatible = "olimex,imx23-olinuxino", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + status = "okay"; + }; + }; + + apbx@80040000 { + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts new file mode 100644 index 000000000000..757a327ff3e8 --- /dev/null +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -0,0 +1,78 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "Freescale STMP378x Development Board"; + compatible = "fsl,stmp378x-devb", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + wp-gpios = <&gpio1 30 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ + 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 8c5f9994f3fc..a874dbfb5ae6 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -18,6 +18,8 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + serial0 = &auart0; + serial1 = &auart1; }; cpus { @@ -57,13 +59,15 @@ status = "disabled"; }; - bch@8000a000 { - reg = <0x8000a000 2000>; - status = "disabled"; - }; - - gpmi@8000c000 { - reg = <0x8000c000 2000>; + gpmi-nand@8000c000 { + compatible = "fsl,imx23-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <13>, <56>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -114,24 +118,151 @@ duart_pins_a: duart@0 { reg = <0>; - fsl,pinmux-ids = <0x11a2 0x11b2>; + fsl,pinmux-ids = < + 0x11a2 /* MX23_PAD_PWM0__DUART_RX */ + 0x11b2 /* MX23_PAD_PWM1__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart0_pins_a: auart0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */ + 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */ + 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */ + 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */ + >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; + gpmi_pins_a: gpmi-nand@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */ + 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */ + 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */ + 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */ + 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */ + 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */ + 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */ + 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */ + 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */ + 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */ + 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */ + 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */ + 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ + 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ + 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ + 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */ + 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_fixup: gpmi-pins-fixup { + fsl,pinmux-ids = < + 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ + 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ + 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ + >; + fsl,drive-strength = <2>; + }; + + mmc0_4bit_pins_a: mmc0-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ + 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ + 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ + 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ + 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; - fsl,pinmux-ids = <0x2020 0x2030 0x2040 - 0x2050 0x0082 0x0092 0x00a2 - 0x00b2 0x2000 0x2010 0x2060>; + fsl,pinmux-ids = < + 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ + 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ + 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ + 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ + 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */ + 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */ + 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */ + 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */ + 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_pins_fixup: mmc0-pins-fixup { - fsl,pinmux-ids = <0x2010 0x2060>; + fsl,pinmux-ids = < + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; + fsl,pull-up = <0>; + }; + + pwm2_pins_a: pwm2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11c0 /* MX23_PAD_PWM2__PWM2 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_24bit_pins_a: lcdif-24bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */ + 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */ + 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */ + 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */ + 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */ + 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */ + 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */ + 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */ + 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */ + 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */ + 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; fsl,pull-up = <0>; }; }; @@ -172,7 +303,9 @@ }; lcdif@80030000 { + compatible = "fsl,imx23-lcdif"; reg = <0x80030000 2000>; + interrupts = <46 45>; status = "disabled"; }; @@ -242,12 +375,16 @@ }; rtc@8005c000 { + compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; reg = <0x8005c000 2000>; - status = "disabled"; + interrupts = <22>; }; - pwm@80064000 { + pwm: pwm@80064000 { + compatible = "fsl,imx23-pwm"; reg = <0x80064000 2000>; + #pwm-cells = <2>; + fsl,pwm-number = <5>; status = "disabled"; }; @@ -257,12 +394,16 @@ }; auart0: serial@8006c000 { + compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; + interrupts = <24 25 23>; status = "disabled"; }; auart1: serial@8006e000 { + compatible = "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; + interrupts = <59 60 58>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts new file mode 100644 index 000000000000..d3f8296e19e0 --- /dev/null +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -0,0 +1,41 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx27.dtsi" + +/ { + model = "mx27_3ds"; + compatible = "freescale,imx27-3ds", "fsl,imx27"; + + memory { + reg = <0x0 0x0>; + }; + + soc { + aipi@10000000 { /* aipi */ + + wdog@10002000 { + status = "okay"; + }; + + uart@1000a000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + fec@1002b000 { + status = "okay"; + }; + }; + }; + +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 386c769c38d1..00bae3aad5ab 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -121,7 +121,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@10015100 { @@ -131,7 +131,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@10015200 { @@ -141,7 +141,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@10015300 { @@ -151,7 +151,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@10015400 { @@ -161,7 +161,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@10015500 { @@ -171,7 +171,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; cspi3: cspi@10017000 { diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts new file mode 100644 index 000000000000..b383417a558f --- /dev/null +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -0,0 +1,198 @@ +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Bluegiga APX4 Development Kit"; + compatible = "bluegiga,apx4devkit", "fsl,imx28"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; + bus-width = <4>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ + 0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */ + 0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */ + 0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */ + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + 0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_apx4: lcdif-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */ + 0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */ + 0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */ + 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ + 0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */ + 0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 { + fsl,pinmux-ids = < + 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ + >; + fsl,drive-strength = <2>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_apx4>; + status = "okay"; + }; + }; + + apbx@80040000 { + saif0: saif@80042000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; + }; + + saif1: saif@80046000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + }; + + pcf8563: rtc@51 { + compatible = "phg,pcf8563"; + reg = <0x51>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + auart1: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; + }; + + auart2: serial@8006e000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "bluegiga,apx4devkit-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "apx4devkit-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio3 28 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts new file mode 100644 index 000000000000..c03a577beca3 --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -0,0 +1,52 @@ +/* + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Crystalfontz CFA-10036 Board"; + compatible = "crystalfontz,cfa10036", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + }; + + apbx@80040000 { + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&gpio3 4 1>; + default-state = "on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index ee520a529cb4..773c0e84d1fb 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -22,6 +22,13 @@ apb@80000000 { apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg + &gpmi_pins_evk>; + status = "okay"; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -29,6 +36,7 @@ &mmc0_cd_cfg &mmc0_sck_cfg>; bus-width = <8>; wp-gpios = <&gpio2 12 0>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; @@ -36,6 +44,72 @@ compatible = "fsl,imx28-mmc"; bus-width = <8>; wp-gpios = <&gpio0 28 0>; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */ + 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */ + 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */ + 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */ + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */ + 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_evk: gpmi-nand-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */ + 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_evk: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_evk>; + panel-enable-gpios = <&gpio3 30 0>; + status = "okay"; + }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; + }; + + can1: can@80034000 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; status = "okay"; }; }; @@ -68,19 +142,58 @@ }; }; + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; status = "okay"; }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; }; }; ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 13 0>; + phy-reset-duration = <100>; status = "okay"; }; @@ -102,6 +215,40 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_fec_3v3: fec-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 15 0>; + }; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + enable-active-high; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 8 0>; + enable-active-high; + }; }; sound { @@ -111,4 +258,21 @@ saif-controllers = <&saif0 &saif1>; audio-codec = <&sgtl5000>; }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio3 5 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts new file mode 100644 index 000000000000..183a3fd2d859 --- /dev/null +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -0,0 +1,210 @@ +/* + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "DENX M28EVK"; + compatible = "denx,m28evk", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00300000>; + read-only; + }; + + partition@1 { + label = "environment"; + reg = <0x00300000 0x00080000>; + }; + + partition@2 { + label = "redundant-environment"; + reg = <0x00380000 0x00080000>; + }; + + partition@3 { + label = "kernel"; + reg = <0x00400000 0x00400000>; + }; + + partition@4 { + label = "filesystem"; + reg = <0x00800000 0x0f800000>; + }; + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio3 10 1>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ + 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */ + 0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + status = "okay"; + }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; + }; + + can1: can@80034000 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; + }; + }; + + apbx@80040000 { + saif0: saif@80042000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; + }; + + saif1: saif@80046000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + }; + + eeprom: eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc: rtc@68 { + compatible = "stm,mt41t62"; + reg = <0x68>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio3 11 0>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "denx,m28evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "m28evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts new file mode 100644 index 000000000000..62bf767409a6 --- /dev/null +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -0,0 +1,97 @@ +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Ka-Ro electronics TX28 module"; + compatible = "karo,tx28", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + ds1339: rtc@68 { + compatible = "mxim,ds1339"; + reg = <0x68>; + }; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_4pins_a>; + status = "okay"; + }; + + auart1: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio4 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 4634cb861a59..915db89e3644 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -22,6 +22,11 @@ gpio4 = &gpio4; saif0 = &saif0; saif1 = &saif1; + serial0 = &auart0; + serial1 = &auart1; + serial2 = &auart2; + serial3 = &auart3; + serial4 = &auart4; }; cpus { @@ -68,15 +73,15 @@ status = "disabled"; }; - bch@8000a000 { - reg = <0x8000a000 2000>; - interrupts = <41>; - status = "disabled"; - }; - - gpmi@8000c000 { - reg = <0x8000c000 2000>; - interrupts = <42 88>; + gpmi-nand@8000c000 { + compatible = "fsl,imx28-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <88>, <41>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -161,7 +166,150 @@ duart_pins_a: duart@0 { reg = <0>; - fsl,pinmux-ids = <0x3102 0x3112>; + fsl,pinmux-ids = < + 0x3102 /* MX28_PAD_PWM0__DUART_RX */ + 0x3112 /* MX28_PAD_PWM1__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + duart_pins_b: duart@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ + 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + duart_4pins_a: duart-4pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ + 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ + 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */ + 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_a: gpmi-nand@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */ + 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */ + 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */ + 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */ + 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */ + 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */ + 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */ + 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */ + 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */ + 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */ + 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ + 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ + 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */ + 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */ + 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_status_cfg: gpmi-status-cfg { + fsl,pinmux-ids = < + 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ + 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ + 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + >; + fsl,drive-strength = <2>; + }; + + auart0_pins_a: auart0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ + 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ + 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */ + 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart0_2pins_a: auart0-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ + 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart1_pins_a: auart1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ + 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ + 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */ + 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart1_2pins_a: auart1-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ + 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart2_2pins_a: auart2-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */ + 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart3_pins_a: auart3@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ + 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ + 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */ + 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart3_2pins_a: auart3-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */ + 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */ + >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; @@ -169,9 +317,17 @@ mac0_pins_a: mac0@0 { reg = <0>; - fsl,pinmux-ids = <0x4000 0x4010 0x4020 - 0x4030 0x4040 0x4060 0x4070 - 0x4080 0x4100>; + fsl,pinmux-ids = < + 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */ + 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */ + 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */ + 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */ + 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */ + 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */ + 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */ + 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */ + 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -179,8 +335,14 @@ mac1_pins_a: mac1@0 { reg = <0>; - fsl,pinmux-ids = <0x40f1 0x4091 0x40a1 - 0x40e1 0x40b1 0x40c1>; + fsl,pinmux-ids = < + 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */ + 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */ + 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */ + 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */ + 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */ + 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -188,28 +350,61 @@ mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; - fsl,pinmux-ids = <0x2000 0x2010 0x2020 - 0x2030 0x2040 0x2050 0x2060 - 0x2070 0x2080 0x2090 0x20a0>; + fsl,pinmux-ids = < + 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ + 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ + 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ + 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ + 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */ + 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */ + 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */ + 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */ + 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc0_4bit_pins_a: mmc0-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ + 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ + 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ + 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ + 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_cd_cfg: mmc0-cd-cfg { - fsl,pinmux-ids = <0x2090>; + fsl,pinmux-ids = < + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + >; fsl,pull-up = <0>; }; mmc0_sck_cfg: mmc0-sck-cfg { - fsl,pinmux-ids = <0x20a0>; + fsl,pinmux-ids = < + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; fsl,drive-strength = <2>; fsl,pull-up = <0>; }; i2c0_pins_a: i2c0@0 { reg = <0>; - fsl,pinmux-ids = <0x3180 0x3190>; + fsl,pinmux-ids = < + 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */ + 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -217,8 +412,12 @@ saif0_pins_a: saif0@0 { reg = <0>; - fsl,pinmux-ids = - <0x3140 0x3150 0x3160 0x3170>; + fsl,pinmux-ids = < + 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */ + 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ + 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ + 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ + >; fsl,drive-strength = <2>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -226,11 +425,88 @@ saif1_pins_a: saif1@0 { reg = <0>; - fsl,pinmux-ids = <0x31a0>; + fsl,pinmux-ids = < + 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */ + >; fsl,drive-strength = <2>; fsl,voltage = <1>; fsl,pull-up = <1>; }; + + pwm0_pins_a: pwm0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3100 /* MX28_PAD_PWM0__PWM_0 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + pwm2_pins_a: pwm2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3120 /* MX28_PAD_PWM2__PWM_2 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_24bit_pins_a: lcdif-24bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */ + 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */ + 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */ + 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */ + 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */ + 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + can0_pins_a: can0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */ + 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + can1_pins_a: can1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */ + 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; digctl@8001c000 { @@ -272,18 +548,21 @@ }; lcdif@80030000 { + compatible = "fsl,imx28-lcdif"; reg = <0x80030000 2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { + compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80032000 2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { + compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80034000 2000>; interrupts = <9>; status = "disabled"; @@ -370,9 +649,9 @@ }; rtc@80056000 { + compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; reg = <0x80056000 2000>; - interrupts = <28 29>; - status = "disabled"; + interrupts = <29>; }; i2c0: i2c@80058000 { @@ -393,8 +672,11 @@ status = "disabled"; }; - pwm@80064000 { + pwm: pwm@80064000 { + compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; reg = <0x80064000 2000>; + #pwm-cells = <2>; + fsl,pwm-number = <8>; status = "disabled"; }; @@ -404,30 +686,35 @@ }; auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; status = "disabled"; }; auart1: serial@8006c000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; status = "disabled"; }; auart2: serial@8006e000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; status = "disabled"; }; auart3: serial@80070000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; status = "disabled"; }; auart4: serial@80072000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; status = "disabled"; @@ -441,11 +728,13 @@ }; usbphy0: usbphy@8007c000 { + compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; status = "disabled"; }; usbphy1: usbphy@8007e000 { + compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007e000 0x2000>; status = "disabled"; }; @@ -459,13 +748,19 @@ reg = <0x80080000 0x80000>; ranges; - usbctrl0: usbctrl@80080000 { + usb0: usb@80080000 { + compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80080000 0x10000>; + interrupts = <93>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; - usbctrl1: usbctrl@80090000 { + usb1: usb@80090000 { + compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80090000 0x10000>; + interrupts = <92>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts new file mode 100644 index 000000000000..24731cb78e8e --- /dev/null +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -0,0 +1,31 @@ +/* + * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx31.dtsi" + +/ { + model = "Buglabs i.MX31 Bug 1.x"; + compatible = "fsl,imx31-bug", "fsl,imx31"; + + memory { + reg = <0x80000000 0x8000000>; /* 128M */ + }; + + soc { + aips@43f00000 { /* AIPS1 */ + uart5: serial@43fb4000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi new file mode 100644 index 000000000000..eef7099f3e3c --- /dev/null +++ b/arch/arm/boot/dts/imx31.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + }; + + avic: avic-interrupt-controller@60000000 { + compatible = "fsl,imx31-avic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x60000000 0x100000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&avic>; + ranges; + + aips@43f00000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x43f00000 0x100000>; + ranges; + + uart1: serial@43f90000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + status = "disabled"; + }; + + uart2: serial@43f94000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f94000 0x4000>; + interrupts = <32>; + status = "disabled"; + }; + + uart4: serial@43fb0000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43fb0000 0x4000>; + interrupts = <46>; + status = "disabled"; + }; + + uart5: serial@43fb4000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43fb4000 0x4000>; + interrupts = <47>; + status = "disabled"; + }; + }; + + spba@50000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x100000>; + ranges; + + uart3: serial@5000c000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + interrupts = <18>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index bfa65abe8ef2..922adefdd291 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -133,7 +133,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@73f88000 { @@ -143,7 +143,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@73f8c000 { @@ -153,7 +153,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@73f90000 { @@ -163,7 +163,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; wdog@73f98000 { /* WDOG1 */ diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index e3e869470cd3..4e735edc78ed 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -135,7 +135,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@53f88000 { @@ -145,7 +145,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@53f8c000 { @@ -155,7 +155,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@53f90000 { @@ -165,7 +165,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; wdog@53f98000 { /* WDOG1 */ @@ -203,7 +203,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@53fe0000 { @@ -213,7 +213,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@53fe4000 { @@ -223,7 +223,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; i2c@53fec000 { /* I2C3 */ diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index db4c6096c562..d792581672cc 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -22,6 +22,12 @@ }; soc { + gpmi-nand@00112000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_1>; + status = "disabled"; /* gpmi nand conflicts with SD */ + }; + aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index e0ec92973e7e..d42e851ceb97 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -27,6 +27,8 @@ ecspi@02008000 { /* eCSPI1 */ fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; status = "okay"; flash: m25p80@0 { @@ -42,9 +44,31 @@ }; }; + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_hog>; + + gpios { + pinctrl_gpio_hog: gpiohog { + fsl,pins = < + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + >; + }; + }; + }; }; aips-bus@02100000 { /* AIPS2 */ + usb@02184000 { /* USB OTG */ + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; + }; + + usb@02184200 { /* USB1 */ + status = "okay"; + }; + ethernet@02188000 { phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 0>; @@ -111,6 +135,15 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; }; sound { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 8c90cbac945f..c25d49584814 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -87,6 +87,23 @@ interrupt-parent = <&intc>; ranges; + dma-apbh@00110000 { + compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x00110000 0x2000>; + }; + + gpmi-nand@00112000 { + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00112000 0x2000>, <0x00114000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 13 0x04>, <0 15 0x04>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <0>; + status = "disabled"; + }; + timer@00a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; @@ -266,7 +283,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@020a0000 { @@ -276,7 +293,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@020a4000 { @@ -286,7 +303,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@020a8000 { @@ -296,7 +313,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@020ac000 { @@ -306,7 +323,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@020b0000 { @@ -316,7 +333,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@020b4000 { @@ -326,7 +343,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; kpp@020b8000 { @@ -444,12 +461,14 @@ }; }; - usbphy@020c9000 { /* USBPHY1 */ + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; }; - usbphy@020ca000 { /* USBPHY2 */ + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 0x04>; }; @@ -495,6 +514,30 @@ }; }; + gpmi-nand { + pinctrl_gpmi_nand_1: gpmi-nand-1 { + fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ + 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ + 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ + 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ + 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ + 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ + 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ + 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ + 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ + 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ + 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ + 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ + 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ + 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ + 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ + 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ + 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ + 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ + 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + }; + }; + i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ @@ -538,6 +581,14 @@ 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ }; }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ + 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ + 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + }; + }; }; dcic@020e4000 { /* DCIC1 */ @@ -573,6 +624,36 @@ reg = <0x0217c000 0x4000>; }; + usb@02184000 { /* USB OTG */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 0x04>; + fsl,usbphy = <&usbphy1>; + status = "disabled"; + }; + + usb@02184200 { /* USB1 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <0 40 0x04>; + fsl,usbphy = <&usbphy2>; + status = "disabled"; + }; + + usb@02184400 { /* USB2 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 0x04>; + status = "disabled"; + }; + + usb@02184600 { /* USB3 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184600 0x200>; + interrupts = <0 42 0x04>; + status = "disabled"; + }; + ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 3f5dad801a98..e5ffe960dbf3 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -35,13 +35,14 @@ slc: flash@20020000 { compatible = "nxp,lpc3220-slc"; reg = <0x20020000 0x1000>; - status = "disable"; + status = "disabled"; }; - mlc: flash@200B0000 { + mlc: flash@200a8000 { compatible = "nxp,lpc3220-mlc"; - reg = <0x200B0000 0x1000>; - status = "disable"; + reg = <0x200a8000 0x11000>; + interrupts = <11 0>; + status = "disabled"; }; dma@31000000 { @@ -57,21 +58,21 @@ compatible = "nxp,ohci-nxp", "usb-ohci"; reg = <0x31020000 0x300>; interrupts = <0x3b 0>; - status = "disable"; + status = "disabled"; }; usbd@31020000 { compatible = "nxp,lpc3220-udc"; reg = <0x31020000 0x300>; interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; - status = "disable"; + status = "disabled"; }; clcd@31040000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x31040000 0x1000>; interrupts = <0x0e 0>; - status = "disable"; + status = "disabled"; }; mac: ethernet@31060000 { @@ -114,9 +115,10 @@ }; sd@20098000 { - compatible = "arm,pl180", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; reg = <0x20098000 0x1000>; interrupts = <0x0f 0>, <0x0d 0>; + status = "disabled"; }; i2s1: i2s@2009C000 { @@ -124,24 +126,42 @@ reg = <0x2009C000 0x1000>; }; + /* UART5 first since it is the default console, ttyS0 */ + uart5: serial@40090000 { + /* actually, ns16550a w/ 64 byte fifos! */ + compatible = "nxp,lpc3220-uart"; + reg = <0x40090000 0x1000>; + interrupts = <9 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; + }; + uart3: serial@40080000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40080000 0x1000>; + interrupts = <7 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; uart4: serial@40088000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40088000 0x1000>; - }; - - uart5: serial@40090000 { - compatible = "nxp,serial"; - reg = <0x40090000 0x1000>; + interrupts = <8 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; uart6: serial@40098000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40098000 0x1000>; + interrupts = <10 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; i2c1: i2c@400A0000 { @@ -192,18 +212,24 @@ }; uart1: serial@40014000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-hsuart"; reg = <0x40014000 0x1000>; + interrupts = <26 0>; + status = "disabled"; }; uart2: serial@40018000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-hsuart"; reg = <0x40018000 0x1000>; + interrupts = <25 0>; + status = "disabled"; }; - uart7: serial@4001C000 { - compatible = "nxp,serial"; - reg = <0x4001C000 0x1000>; + uart7: serial@4001c000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x4001c000 0x1000>; + interrupts = <24 0>; + status = "disabled"; }; rtc@40024000 { @@ -235,21 +261,28 @@ compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; - status = "disable"; + status = "disabled"; }; tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; - status = "disable"; + status = "disabled"; }; key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; + interrupts = <54 0>; + status = "disabled"; }; + pwm: pwm@4005C000 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005C000 0x8>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index 153a4b2d12b5..c9b4f27d191e 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -11,7 +11,7 @@ /include/ "mmp2.dtsi" / { - model = "Marvell MMP2 Aspenite Development Board"; + model = "Marvell MMP2 Brownstone Development Board"; compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; chosen { @@ -19,7 +19,7 @@ }; memory { - reg = <0x00000000 0x04000000>; + reg = <0x00000000 0x08000000>; }; soc { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index f2ab4ea7cc0e..581cb081cb0f 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -44,6 +44,8 @@ compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x480FE000 0x1000>; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts new file mode 100644 index 000000000000..25b50b759dec --- /dev/null +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap2.dtsi" + +/ { + model = "TI OMAP2420 H4 board"; + compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x84000000>; /* 64 MB */ + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 5b4506c0a8c4..cdcb98c7e075 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -61,9 +61,9 @@ }; &mmc2 { - status = "disable"; + status = "disabled"; }; &mmc3 { - status = "disable"; + status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 2eee16ec59b4..f349ee9182ce 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -18,3 +18,31 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; }; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 99474fa5fac4..810947198208 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -215,5 +215,10 @@ compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc3"; }; + + wdt2: wdt@48314000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 1efe0c587985..9880c12877b3 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -32,6 +32,30 @@ linux,default-trigger = "mmc0"; }; }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "PandaBoard"; + + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; }; &i2c1 { @@ -43,6 +67,19 @@ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; }; /include/ "twl6030.dtsi" @@ -74,15 +111,15 @@ }; &mmc2 { - status = "disable"; + status = "disabled"; }; &mmc3 { - status = "disable"; + status = "disabled"; }; &mmc4 { - status = "disable"; + status = "disabled"; }; &mmc5 { diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-pandaES.dts new file mode 100644 index 000000000000..d4ba43a48d9b --- /dev/null +++ b/arch/arm/boot/dts/omap4-pandaES.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index d08c4d137280..72216e932fc0 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -28,6 +28,14 @@ regulator-boot-on; }; + vbat: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + regulator-min-microvolt = <3750000>; + regulator-max-microvolt = <3750000>; + regulator-boot-on; + }; + leds { compatible = "gpio-leds"; debug0 { @@ -70,6 +78,41 @@ gpios = <&gpio5 11 0>; /* 139 */ }; }; + + sound { + compatible = "ti,abe-twl6040"; + ti,model = "SDP4430"; + + ti,jack-detection = <1>; + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + ti,dmic = <&dmic>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Earphone Spk", "EP", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "Vibrator", "VIBRAL", + "Vibrator", "VIBRAR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "MAINMIC", "Main Handset Mic", + "Main Handset Mic", "Main Mic Bias", + "SUBMIC", "Sub Handset Mic", + "Sub Handset Mic", "Main Mic Bias", + "AFML", "Line In", + "AFMR", "Line In", + "DMic", "Digital Mic", + "Digital Mic", "Digital Mic1 Bias"; + }; }; &i2c1 { @@ -81,6 +124,31 @@ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + + /* regulators for vibra motor */ + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + + vibra { + /* Vibra driver, motor resistance parameters */ + ti,vibldrv-res = <8>; + ti,vibrdrv-res = <3>; + ti,viblmotor-res = <10>; + ti,vibrmotor-res = <10>; + }; + }; }; /include/ "twl6030.dtsi" @@ -147,11 +215,11 @@ }; &mmc3 { - status = "disable"; + status = "disabled"; }; &mmc4 { - status = "disable"; + status = "disabled"; }; &mmc5 { diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var_som.dts new file mode 100644 index 000000000000..6601e6af6092 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var_som.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap4.dtsi" + +/ { + model = "Variscite OMAP4 SOM"; + compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + vdd_eth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_ETH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-boot-on; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * Temperature Sensor + * http://www.ti.com/lit/ds/symlink/tmp105.pdf + */ + tmp105@49 { + compatible = "ti,tmp105"; + reg = <0x49>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; +}; + +&mcspi1 { + eth@0 { + compatible = "ks8851"; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio6>; + interrupts = <11>; /* gpio line 171 */ + vdd-supply = <&vdd_eth>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + ti,bus-width = <8>; + ti,non-removable; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + ti,bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 359c4979c8aa..04cbbcb6ff91 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -272,5 +272,28 @@ ti,hwmods = "mmc5"; ti,needs-special-reset; }; + + wdt2: wdt@4a314000 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; + + mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; + }; + + dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts new file mode 100644 index 000000000000..200c39ad1c82 --- /dev/null +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap5.dtsi" + +/ { + model = "TI OMAP5 EVM board"; + compatible = "ti,omap5-evm", "ti,omap5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi new file mode 100644 index 000000000000..57e527083746 --- /dev/null +++ b/arch/arm/boot/dts/omap5.dtsi @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +/* + * Carveout for multimedia usecases + * It should be the last 48MB of the first 512MB memory part + * In theory, it should not even exist. That zone should be reserved + * dynamically during the .reserve callback. + */ +/memreserve/ 0x9d000000 0x03000000; + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,omap5"; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a15"; + }; + cpu@1 { + compatible = "arm,cortex-a15"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the OMAP3 interconnect. + * The real OMAP interconnect network is quite complex. + * Since that will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "ti,omap4-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>; + }; + + gpio1: gpio@4ae10000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@48055000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@48057000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@48059000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@4805b000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio5"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@4805d000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio6"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio7: gpio@48051000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio7"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio8: gpio@48053000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio8"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@4806a000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@4806c000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@48020000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + + uart4: serial@4806e000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + + uart5: serial@48066000 { + compatible = "ti,omap5-uart"; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + }; + + uart6: serial@48068000 { + compatible = "ti,omap6-uart"; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index c4ff6d1a018b..802ec5b2fd00 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -54,6 +54,17 @@ #address-cells = <1>; #size-cells = <1>; + nxp,wdr-clks = <14>; + nxp,wwidth = <40000000>; + nxp,whold = <100000000>; + nxp,wsetup = <100000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <40000000>; + nxp,rhold = <66666666>; + nxp,rsetup = <100000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + mtd0@00000000 { label = "phy3250-boot"; reg = <0x00000000 0x00064000>; @@ -83,6 +94,14 @@ }; apb { + uart5: serial@40090000 { + status = "okay"; + }; + + uart3: serial@40080000 { + status = "okay"; + }; + i2c1: i2c@400A0000 { clock-frequency = <100000>; @@ -114,16 +133,58 @@ }; ssp0: ssp@20084000 { + #address-cells = <1>; + #size-cells = <0>; + pl022,num-chipselects = <1>; + cs-gpios = <&gpio 3 5 0>; + eeprom: at25@0 { + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable = <0>; + pl022,com-mode = <0>; + pl022,rx-level-trig = <1>; + pl022,tx-level-trig = <1>; + pl022,ctrl-len = <11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + + at25,byte-len = <0x8000>; + at25,addr-mode = <2>; + at25,page-size = <64>; + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; }; }; + + sd@20098000 { + wp-gpios = <&gpio 3 0 0>; + cd-gpios = <&gpio 3 1 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; + }; }; fab { + uart2: serial@40018000 { + status = "okay"; + }; + tsc@40048000 { status = "okay"; }; + + key@40050000 { + status = "okay"; + keypad,num-rows = <1>; + keypad,num-columns = <1>; + nxp,debounce-delay-ms = <3>; + nxp,scan-delay-ms = <34>; + linux,keymap = <0x00000002>; + }; }; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index ec3c33975110..7e334d4cae21 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -77,6 +77,8 @@ used-led { label = "user_led"; gpios = <&gpio4 14 0x4>; + default-state = "on"; + linux,default-trigger = "heartbeat"; }; }; @@ -101,15 +103,30 @@ }; }; + // External Micro SD slot sdi@80126000 { - status = "enabled"; + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; + + #gpio-cells = <1>; cd-gpios = <&gpio6 26 0x4>; // 218 + cd-inverted; + + status = "okay"; }; + // On-board eMMC sdi@80114000 { - status = "enabled"; + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; }; uart@80120000 { diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi new file mode 100644 index 000000000000..0772f5739f59 --- /dev/null +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2012 Altera <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/include/ "skeleton.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &gmac0; + serial0 = &uart0; + serial1 = &uart1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + + intc: intc@fffed000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xfffed000 0x1000>, + <0xfffec100 0x100>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + interrupt-parent = <&intc>; + ranges; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@ffe01000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xffe01000 0x1000>; + interrupts = <0 180 4>; + }; + }; + + gmac0: stmmac@ff700000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; + reg = <0xff700000 0x2000>; + interrupts = <0 115 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ + phy-mode = "gmii"; + }; + + L2: l2-cache@fffef000 { + compatible = "arm,pl310-cache"; + reg = <0xfffef000 0x1000>; + interrupts = <0 38 0x04>; + cache-unified; + cache-level = <2>; + }; + + /* Local timer */ + timer@fffec600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xfffec600 0x100>; + interrupts = <1 13 0xf04>; + }; + + timer0: timer@ffc08000 { + compatible = "snps,dw-apb-timer-sp"; + interrupts = <0 167 4>; + clock-frequency = <200000000>; + reg = <0xffc08000 0x1000>; + }; + + timer1: timer@ffc09000 { + compatible = "snps,dw-apb-timer-sp"; + interrupts = <0 168 4>; + clock-frequency = <200000000>; + reg = <0xffc09000 0x1000>; + }; + + timer2: timer@ffd00000 { + compatible = "snps,dw-apb-timer-osc"; + interrupts = <0 169 4>; + clock-frequency = <200000000>; + reg = <0xffd00000 0x1000>; + }; + + timer3: timer@ffd01000 { + compatible = "snps,dw-apb-timer-osc"; + interrupts = <0 170 4>; + clock-frequency = <200000000>; + reg = <0xffd01000 0x1000>; + }; + + uart0: uart@ffc02000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02000 0x1000>; + clock-frequency = <7372800>; + interrupts = <0 162 4>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart1: uart@ffc03000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc03000 0x1000>; + clock-frequency = <7372800>; + interrupts = <0 163 4>; + reg-shift = <2>; + reg-io-width = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts new file mode 100644 index 000000000000..ab7e4a94299f --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5.dts @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; +/include/ "socfpga.dtsi" + +/ { + model = "Altera SOCFPGA Cyclone V"; + compatible = "altr,socfpga-cyclone5"; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x10000000>; /* 256MB */ + }; +}; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 8314e4171884..dd4358bc26e2 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 9e61da404d57..419ea7413d23 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1310 SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 0d8472e5ab9f..c9a54e06fb68 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1340 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index a26fc47a55e8..d71fe2a68f09 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1340 SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 1f8e1e1481df..f7b84aced654 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr13xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -43,8 +43,8 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 8 0x04 - 0 9 0x04>; + interrupts = <0 6 0x04 + 0 7 0x04>; }; L2: l2-cache { @@ -119,8 +119,8 @@ gmac0: eth@e2000000 { compatible = "st,spear600-gmac"; reg = <0xe2000000 0x8000>; - interrupts = <0 23 0x4 - 0 24 0x4>; + interrupts = <0 33 0x4 + 0 34 0x4>; interrupt-names = "macirq", "eth_wake_irq"; status = "disabled"; }; @@ -202,6 +202,7 @@ kbd@e0300000 { compatible = "st,spear300-kbd"; reg = <0xe0300000 0x1000>; + interrupts = <0 52 0x4>; status = "disabled"; }; @@ -224,7 +225,7 @@ serial@e0000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xe0000000 0x1000>; - interrupts = <0 36 0x4>; + interrupts = <0 35 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index fc82b1a26458..d71b8d581e3d 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index 01c5e358fdb2..ed3627c116cc 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index dc5e2d445a93..b00544e0cd5d 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index e47081c494d9..62fc4fb3e5f9 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 6308fa3bec1e..e4e912f95024 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -15,8 +15,8 @@ /include/ "spear320.dtsi" / { - model = "ST SPEAr300 Evaluation Board"; - compatible = "st,spear300-evb", "st,spear300"; + model = "ST SPEAr320 Evaluation Board"; + compatible = "st,spear320-evb", "st,spear320"; #address-cells = <1>; #size-cells = <1>; @@ -26,7 +26,7 @@ ahb { pinmux@b3000000 { - st,pinmux-mode = <3>; + st,pinmux-mode = <4>; pinctrl-names = "default"; pinctrl-0 = <&state_default>; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 5372ca399b1f..1f49d69595a0 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 91072553963f..3a8bb5736928 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr3xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 089f0a42c50e..a3c36e47d7ef 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -181,6 +181,7 @@ timer@f0000000 { compatible = "st,spear-timer"; reg = <0xf0000000 0x400>; + interrupt-parent = <&vic0>; interrupts = <16>; }; }; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 7de701365fce..f146dbf6f7f8 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -307,7 +307,6 @@ cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index bfeb117d5aea..684a9e1ff7e9 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -301,7 +301,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 89cb7f2acd92..85e621ab2968 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -64,11 +64,6 @@ nvidia,pins = "dap4"; nvidia,function = "dap4"; }; - ddc { - nvidia,pins = "ddc", "owc", "spdi", "spdo", - "uac"; - nvidia,function = "rsvd2"; - }; dta { nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; nvidia,function = "vi"; @@ -129,14 +124,14 @@ "lspi", "lvp1", "lvs"; nvidia,function = "displaya"; }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; pmc { nvidia,pins = "pmc"; nvidia,function = "pwr_on"; }; - pta { - nvidia,pins = "pta"; - nvidia,function = "i2c2"; - }; rm { nvidia,pins = "rm"; nvidia,function = "i2c1"; @@ -176,7 +171,7 @@ conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "cdev1", "cdev2", "dap1", "dap2", - "dap4", "dtf", "gma", "gmc", "gmd", + "dap4", "ddc", "dtf", "gma", "gmc", "gmd", "gme", "gpu", "gpu7", "i2cp", "irrx", "irtx", "pta", "rm", "sdc", "sdd", "slxd", "slxk", "spdi", "spdo", "uac", @@ -185,7 +180,7 @@ nvidia,tristate = <0>; }; conf_ate { - nvidia,pins = "ate", "csus", "dap3", "ddc", + nvidia,pins = "ate", "csus", "dap3", "gpv", "owc", "slxc", "spib", "spid", "spie"; nvidia,pull = <0>; @@ -255,6 +250,39 @@ nvidia,slew-rate-falling = <3>; }; }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; }; i2s@70002800 { @@ -303,12 +331,37 @@ i2c@7000c400 { status = "okay"; clock-frequency = <100000>; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; - smart-battery@b { - compatible = "ti,bq20z75", "smart-battery-1.1"; - reg = <0xb>; - ti,i2c-retry-count = <2>; - ti,poll-retry-count = <10>; + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + smart-battery@b { + compatible = "ti,bq20z75", "smart-battery-1.1"; + reg = <0xb>; + ti,i2c-retry-count = <2>; + ti,poll-retry-count = <10>; + }; }; }; @@ -334,7 +387,7 @@ }; }; - emc { + memory-controller@0x7000f400 { emc-table@190000 { reg = <190000>; compatible = "nvidia,tegra20-emc-table"; @@ -397,7 +450,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9de5636023f6..9de5636023f6 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 445343b0fbdd..be90544e6b59 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -314,7 +314,6 @@ sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts new file mode 100644 index 000000000000..6916310bf58f --- /dev/null +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -0,0 +1,301 @@ +/dts-v1/; + +/include/ "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra2 Whistler evaluation board"; + compatible = "nvidia,whistler", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata", "atb", "ate", "gma", "gmb", + "gmc", "gmd", "gpu"; + nvidia,function = "gmi"; + }; + atc { + nvidia,pins = "atc", "atd"; + nvidia,function = "sdio4"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "osc"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd"; + nvidia,function = "vi"; + }; + dte { + nvidia,pins = "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gme { + nvidia,pins = "gme"; + nvidia,function = "dap5"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint", "pta"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uartb"; + }; + kbca { + nvidia,pins = "kbca", "kbcc", "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + kbcb { + nvidia,pins = "kbcb", "kbcd"; + nvidia,function = "sdio2"; + }; + lcsn { + nvidia,pins = "lcsn", "lsck", "lsda", "lsdi", + "spia", "spib", "spic"; + nvidia,function = "spi3"; + }; + ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldc", "ldi", + "lhp0", "lhp1", "lhp2", "lhs", "lm0", + "lm1", "lpp", "lpw0", "lpw1", "lpw2", + "lsc0", "lsc1", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "uac"; + nvidia,function = "owr"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd", "slxa", + "slxc", "slxd", "slxk"; + nvidia,function = "sdio3"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + spdi { + nvidia,pins = "spdi", "spdo"; + nvidia,function = "rsvd2"; + }; + spid { + nvidia,pins = "spid", "spie", "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + spif { + nvidia,pins = "spif"; + nvidia,function = "spi2"; + }; + uaa { + nvidia,pins = "uaa", "uab"; + nvidia,function = "uarta"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + uda { + nvidia,pins = "uda"; + nvidia,function = "spi1"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "ddc", "gma", + "gmb", "gmc", "gmd", "irrx", "irtx", + "kbca", "kbcb", "kbcc", "kbcd", "kbce", + "kbcf", "sdc", "sdd", "spie", "spig", + "spih", "uaa", "uab", "uad", "uca", + "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_atd { + nvidia,pins = "atd", "ate", "cdev1", "csus", + "dap1", "dap2", "dap3", "dap4", "dte", + "dtf", "gpu", "gpu7", "gpv", "i2cp", + "rm", "sdio1", "slxa", "slxc", "slxd", + "slxk", "spdi", "spdo", "uac", "uda"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_cdev2 { + nvidia,pins = "cdev2", "spia", "spib"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "lc", "pmca", + "pmcb", "pmcc", "pmcd", "xm2c", + "xm2d"; + nvidia,pull = <0>; + }; + conf_crtp { + nvidia,pins = "crtp"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd", + "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + }; + conf_gme { + nvidia,pins = "gme", "owc", "pta", "spic"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + conf_ls { + nvidia,pins = "ls", "pmce"; + nvidia,pull = <2>; + }; + drive_dap1 { + nvidia,pins = "drive_dap1"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <1>; + nvidia,low-power-mode = <0>; + nvidia,pull-down-strength = <0>; + nvidia,pull-up-strength = <0>; + nvidia,slew-rate-rising = <0>; + nvidia,slew-rate-falling = <0>; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <216000000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + codec: codec@1a { + compatible = "wlf,wm8753"; + reg = <0x1a>; + }; + + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + usb@c5000000 { + status = "okay"; + nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + }; + + usb@c5008000 { + status = "okay"; + nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + }; + + sdhci@c8000400 { + status = "okay"; + wp-gpios = <&gpio 173 0>; /* gpio PV5 */ + bus-width = <8>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8753-whistler", + "nvidia,tegra-audio-wm8753"; + nvidia,model = "NVIDIA Tegra Whistler"; + + nvidia,audio-routing = + "Headphone Jack", "LOUT1", + "Headphone Jack", "ROUT1", + "MIC2", "Mic Jack", + "MIC2N", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; + }; +}; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index c417d67e9027..9f1921634eb7 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -72,7 +72,7 @@ reg = <0x70002800 0x200>; interrupts = <0 13 0x04>; nvidia,dma-request-selector = <&apbdma 2>; - status = "disable"; + status = "disabled"; }; tegra_i2s2: i2s@70002a00 { @@ -80,7 +80,7 @@ reg = <0x70002a00 0x200>; interrupts = <0 3 0x04>; nvidia,dma-request-selector = <&apbdma 1>; - status = "disable"; + status = "disabled"; }; serial@70006000 { @@ -88,7 +88,7 @@ reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006040 { @@ -96,7 +96,7 @@ reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006200 { @@ -104,7 +104,7 @@ reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006300 { @@ -112,7 +112,7 @@ reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006400 { @@ -120,7 +120,7 @@ reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; - status = "disable"; + status = "disabled"; }; i2c@7000c000 { @@ -129,7 +129,7 @@ interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c400 { @@ -138,7 +138,7 @@ interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c500 { @@ -147,7 +147,7 @@ interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000d000 { @@ -156,7 +156,7 @@ interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; pmc { @@ -164,7 +164,7 @@ reg = <0x7000e400 0x400>; }; - mc { + memory-controller@0x7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; @@ -177,7 +177,7 @@ 0x58000000 0x02000000>; /* GART aperture */ }; - emc { + memory-controller@0x7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; #address-cells = <1>; @@ -190,7 +190,7 @@ interrupts = <0 20 0x04>; phy_type = "utmi"; nvidia,has-legacy-mode; - status = "disable"; + status = "disabled"; }; usb@c5004000 { @@ -198,7 +198,7 @@ reg = <0xc5004000 0x4000>; interrupts = <0 21 0x04>; phy_type = "ulpi"; - status = "disable"; + status = "disabled"; }; usb@c5008000 { @@ -206,35 +206,35 @@ reg = <0xc5008000 0x4000>; interrupts = <0 97 0x04>; phy_type = "utmi"; - status = "disable"; + status = "disabled"; }; sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; interrupts = <0 14 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; interrupts = <0 15 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; interrupts = <0 19 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; interrupts = <0 31 0x04>; - status = "disable"; + status = "disabled"; }; pmu { diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts index 36321bceec46..c169bced131e 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra30-cardhu.dts @@ -144,7 +144,6 @@ sdhci@78000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 2dcc09e784b5..da740191771f 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -82,7 +82,7 @@ reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006040 { @@ -90,7 +90,7 @@ reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006200 { @@ -98,7 +98,7 @@ reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006300 { @@ -106,7 +106,7 @@ reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006400 { @@ -114,7 +114,7 @@ reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; - status = "disable"; + status = "disabled"; }; i2c@7000c000 { @@ -123,7 +123,7 @@ interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c400 { @@ -132,7 +132,7 @@ interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c500 { @@ -141,7 +141,7 @@ interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c700 { @@ -150,7 +150,7 @@ interrupts = <0 120 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000d000 { @@ -159,7 +159,7 @@ interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; pmc { @@ -167,7 +167,7 @@ reg = <0x7000e400 0x400>; }; - mc { + memory-controller { compatible = "nvidia,tegra30-mc"; reg = <0x7000f000 0x010 0x7000f03c 0x1b4 @@ -201,35 +201,35 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; - status = "disable"; + status = "disabled"; }; tegra_i2s1: i2s@70080400 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080400 0x100>; nvidia,ahub-cif-ids = <5 5>; - status = "disable"; + status = "disabled"; }; tegra_i2s2: i2s@70080500 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080500 0x100>; nvidia,ahub-cif-ids = <6 6>; - status = "disable"; + status = "disabled"; }; tegra_i2s3: i2s@70080600 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080600 0x100>; nvidia,ahub-cif-ids = <7 7>; - status = "disable"; + status = "disabled"; }; tegra_i2s4: i2s@70080700 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080700 0x100>; nvidia,ahub-cif-ids = <8 8>; - status = "disable"; + status = "disabled"; }; }; @@ -237,28 +237,28 @@ compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000000 0x200>; interrupts = <0 14 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000200 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000200 0x200>; interrupts = <0 15 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000400 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000400 0x200>; interrupts = <0 19 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000600 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000600 0x200>; interrupts = <0 31 0x04>; - status = "disable"; + status = "disabled"; }; pmu { diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 16076e2d0934..d8a827bd2bf3 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -55,6 +55,8 @@ reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; + vdd33a-supply = <&v2m_fixed_3v3>; + vddvario-supply = <&v2m_fixed_3v3>; }; usb@2,03000000 { @@ -157,6 +159,7 @@ v2m_timer23: timer@120000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x120000 0x1000>; + interrupts = <3>; }; /* DVI I2C bus */ @@ -197,5 +200,13 @@ interrupts = <14>; }; }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index a6c9c7c82d53..dba53fd026bb 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -54,6 +54,8 @@ reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; + vdd33a-supply = <&v2m_fixed_3v3>; + vddvario-supply = <&v2m_fixed_3v3>; }; usb@3,03000000 { @@ -156,6 +158,7 @@ v2m_timer23: timer@12000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x12000 0x1000>; + interrupts = <3>; }; /* DVI I2C bus */ @@ -196,5 +199,13 @@ interrupts = <14>; }; }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 7e1091d91af8..d12b34ca0568 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -14,8 +14,8 @@ arm,hbi = <0x237>; compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress"; interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; chosen { }; @@ -47,23 +47,23 @@ memory@80000000 { device_type = "memory"; - reg = <0x80000000 0x40000000>; + reg = <0 0x80000000 0 0x40000000>; }; hdlcd@2b000000 { compatible = "arm,hdlcd"; - reg = <0x2b000000 0x1000>; + reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; - reg = <0x2b0a0000 0x1000>; + reg = <0 0x2b0a0000 0 0x1000>; }; wdt@2b060000 { compatible = "arm,sp805", "arm,primecell"; - reg = <0x2b060000 0x1000>; + reg = <0 0x2b060000 0 0x1000>; interrupts = <98>; }; @@ -72,23 +72,23 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0x2c001000 0x1000>, - <0x2c002000 0x1000>, - <0x2c004000 0x2000>, - <0x2c006000 0x2000>; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; }; memory-controller@7ffd0000 { compatible = "arm,pl354", "arm,primecell"; - reg = <0x7ffd0000 0x1000>; + reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; }; dma@7ffb0000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x7ffb0000 0x1000>; + reg = <0 0x7ffb0000 0 0x1000>; interrupts = <0 92 4>, <0 88 4>, <0 89 4>, @@ -111,12 +111,12 @@ }; motherboard { - ranges = <0 0 0x08000000 0x04000000>, - <1 0 0x14000000 0x04000000>, - <2 0 0x18000000 0x04000000>, - <3 0 0x1c000000 0x04000000>, - <4 0 0x0c000000 0x04000000>, - <5 0 0x10000000 0x04000000>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts new file mode 100644 index 000000000000..4890a81c5467 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -0,0 +1,188 @@ +/* + * ARM Ltd. Versatile Express + * + * CoreTile Express A15x2 A7x3 + * Cortex-A15_A7 MPCore (V2P-CA15_A7) + * + * HBI-0249A + */ + +/dts-v1/; + +/ { + model = "V2P-CA15_CA7"; + arm,hbi = <0x249>; + compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + +/* A7s disabled till big.LITTLE patches are available... + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + }; + + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + }; +*/ + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x40000000>; + }; + + wdt@2a490000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0 0x2a490000 0 0x1000>; + interrupts = <98>; + }; + + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0 0x2b000000 0 0x1000>; + interrupts = <0 85 4>; + }; + + memory-controller@2b0a0000 { + compatible = "arm,pl341", "arm,primecell"; + reg = <0 0x2b0a0000 0 0x1000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = <0 86 4>, + <0 87 4>; + }; + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0 0x7ff00000 0 0x1000>; + interrupts = <0 92 4>, + <0 88 4>, + <0 89 4>, + <0 90 4>, + <0 91 4>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + interrupts = <0 68 4>, + <0 69 4>; + }; + + motherboard { + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + }; +}; + +/include/ "vexpress-v2m-rs1.dtsi" |