diff options
Diffstat (limited to 'arch/arm/boot/dts/meson8b-odroidc1.dts')
| -rw-r--r-- | arch/arm/boot/dts/meson8b-odroidc1.dts | 207 |
1 files changed, 205 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 9ff6ca4e20d0..58669abda259 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -54,6 +54,11 @@ aliases { serial0 = &uart_AO; + mmc0 = &sd_card_slot; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; memory { @@ -69,12 +74,159 @@ default-state = "off"; }; }; + + p5v0: regulator-p5v0 { + compatible = "regulator-fixed"; + + regulator-name = "P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + tflash_vdd: regulator-tflash_vdd { + /* + * signal name from schematics: TFLASH_VDD_EN + */ + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vcc_3v3>; + + gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vcc_3v3>; + + /* + * signal name from schematics: TF_3V3N_1V8_EN + */ + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0 + 1800000 1>; + }; + + vcc_1v8: regulator-vcc-1v8 { + /* + * RICHTEK RT9179 configured for a fixed output voltage of + * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and + * VDD1V8 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&p5v0>; + }; + + vcc_3v3: regulator-vcc-3v3 { + /* + * Monolithic Power Systems MP2161 configured for a fixed + * output voltage of 3.3V. This supplies not only VCC3V3 but + * also VDD3V3 and VDDIO_AO3V3 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&p5v0>; + }; + + vcck: regulator-vcck { + /* Monolithic Power Systems MP2161 */ + compatible = "pwm-regulator"; + + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&p5v0>; + + pwms = <&pwm_cd 0 12218 0>; + pwm-dutycycle-range = <91 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddc_ddr: regulator-vddc-ddr { + /* + * Monolithic Power Systems MP2161 configured for a fixed + * output voltage of 1.5V. This supplies not only DDR_VDDC but + * also DDR3_1V5 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "DDR_VDDC"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&p5v0>; + }; + + vdd_rtc: regulator-vdd-rtc { + /* + * Torex Semiconductor XC6215 configured for a fixed output of + * 0.9V. + */ + compatible = "regulator-fixed"; + + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&vcc_3v3>; + }; }; -&uart_AO { +&cpu0 { + cpu-supply = <&vcck>; +}; + +ðmac { status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; + + snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + + pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; + + phy-mode = "rgmii"; + phy-handle = <ð_phy>; + amlogic,tx-delay-ns = <4>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Realtek RTL8211F (0x001cc916) */ + eth_phy: ethernet-phy@0 { + reg = <0>; + eee-broken-1000t; + interrupt-parent = <&gpio_intc>; + /* GPIOH_3 */ + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; }; &gpio_ao { @@ -92,6 +244,57 @@ }; }; +&ir_receiver { + status = "okay"; + pinctrl-0 = <&ir_recv_pins>; + pinctrl-names = "default"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; + }; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_XTAL>; + clock-names = "clkin0"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + &usb1_phy { status = "okay"; }; |