summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/meson8.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/meson8.dtsi')
-rw-r--r--arch/arm/boot/dts/meson8.dtsi240
1 files changed, 197 insertions, 43 deletions
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index ebc763eab195..cada35828931 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -43,15 +43,14 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8-gpio.h>
-/include/ "meson.dtsi"
+#include "meson.dtsi"
/ {
model = "Amlogic Meson8 SoC";
compatible = "amlogic,meson8";
- interrupt-parent = <&gic>;
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -85,34 +84,68 @@
};
};
- clk81: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <141666666>;
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* 2 MiB reserved for Hardware ROM Firmware? */
+ hwrom@0 {
+ reg = <0x0 0x200000>;
+ no-map;
+ };
+
+ /*
+ * 1 MiB reserved for the "ARM Power Firmware": this is ARM
+ * code which is responsible for system suspend. It loads a
+ * piece of ARC code ("arc_power" in the vendor u-boot tree)
+ * into SRAM, executes that and shuts down the (last) ARM core.
+ * The arc_power firmware then checks various wakeup sources
+ * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
+ * simply the power key) and re-starts the ARM core once it
+ * detects a wakeup request.
+ */
+ power-firmware@4f00000 {
+ reg = <0x4f00000 0x100000>;
+ no-map;
+ };
+ };
+
+ scu@c4300000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xc4300000 0x100>;
};
+}; /* end of / */
- pinctrl_cbus: pinctrl@c1109880 {
- compatible = "amlogic,meson8-cbus-pinctrl";
- reg = <0xc1109880 0x10>;
+&aobus {
+ pinctrl_aobus: pinctrl@84 {
+ compatible = "amlogic,meson8-aobus-pinctrl";
+ reg = <0x84 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- gpio: banks@c11080b0 {
- reg = <0xc11080b0 0x28>,
- <0xc11080e8 0x18>,
- <0xc1108120 0x18>,
- <0xc1108030 0x30>;
- reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio_ao: ao-bank@14 {
+ reg = <0x14 0x4>,
+ <0x2c 0x4>,
+ <0x24 0x8>;
+ reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&pinctrl_cbus 0 0 120>;
+ gpio-ranges = <&pinctrl_aobus 0 120 16>;
};
- spi_nor_pins: nor {
+ uart_ao_a_pins: uart_ao_a {
mux {
- groups = "nor_d", "nor_q", "nor_c", "nor_cs";
- function = "nor";
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ i2c_ao_pins: i2c_mst_ao {
+ mux {
+ groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+ function = "i2c_mst_ao";
};
};
@@ -123,47 +156,168 @@
};
};
- eth_pins: ethernet {
+ pwm_f_ao_pins: pwm-f-ao {
mux {
- groups = "eth_tx_clk_50m", "eth_tx_en",
- "eth_txd1", "eth_txd0",
- "eth_rx_clk_in", "eth_rx_dv",
- "eth_rxd1", "eth_rxd0", "eth_mdio",
- "eth_mdc";
- function = "ethernet";
+ groups = "pwm_f_ao";
+ function = "pwm_f_ao";
};
};
};
+};
- pinctrl_aobus: pinctrl@c8100084 {
- compatible = "amlogic,meson8-aobus-pinctrl";
- reg = <0xc8100084 0xc>;
+&cbus {
+ clkc: clock-controller@4000 {
+ #clock-cells = <1>;
+ compatible = "amlogic,meson8-clkc";
+ reg = <0x8000 0x4>, <0x4000 0x460>;
+ };
+
+ pinctrl_cbus: pinctrl@9880 {
+ compatible = "amlogic,meson8-cbus-pinctrl";
+ reg = <0x9880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- gpio_ao: ao-bank@c1108030 {
- reg = <0xc8100014 0x4>,
- <0xc810002c 0x4>,
- <0xc8100024 0x8>;
- reg-names = "mux", "pull", "gpio";
+ gpio: banks@80b0 {
+ reg = <0x80b0 0x28>,
+ <0x80e8 0x18>,
+ <0x8120 0x18>,
+ <0x8030 0x30>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&pinctrl_aobus 0 120 16>;
+ gpio-ranges = <&pinctrl_cbus 0 0 120>;
};
- uart_ao_a_pins: uart_ao_a {
+ sd_a_pins: sd-a {
mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a";
- function = "uart_ao";
+ groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
+ "sd_d3_a", "sd_clk_a", "sd_cmd_a";
+ function = "sd_a";
};
};
- i2c_ao_pins: i2c_mst_ao {
+ sd_b_pins: sd-b {
mux {
- groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
- function = "i2c_mst_ao";
+ groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+ "sd_d3_b", "sd_clk_b", "sd_cmd_b";
+ function = "sd_b";
+ };
+ };
+
+ sd_c_pins: sd-c {
+ mux {
+ groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
+ "sd_d3_c", "sd_clk_c", "sd_cmd_c";
+ function = "sd_c";
+ };
+ };
+
+ spi_nor_pins: nor {
+ mux {
+ groups = "nor_d", "nor_q", "nor_c", "nor_cs";
+ function = "nor";
+ };
+ };
+
+ eth_pins: ethernet {
+ mux {
+ groups = "eth_tx_clk_50m", "eth_tx_en",
+ "eth_txd1", "eth_txd0",
+ "eth_rx_clk_in", "eth_rx_dv",
+ "eth_rxd1", "eth_rxd0", "eth_mdio",
+ "eth_mdc";
+ function = "ethernet";
+ };
+ };
+
+ pwm_e_pins: pwm-e {
+ mux {
+ groups = "pwm_e";
+ function = "pwm_e";
};
};
};
-}; /* end of / */
+};
+
+&ethmac {
+ clocks = <&clkc CLKID_ETH>;
+ clock-names = "stmmaceth";
+};
+
+&hwrng {
+ compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
+
+&i2c_AO {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&L2 {
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ arm,filter-ranges = <0x100000 0xc0000000>;
+};
+
+&saradc {
+ compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
+ clocks = <&clkc CLKID_XTAL>,
+ <&clkc CLKID_SAR_ADC>,
+ <&clkc CLKID_SANA>;
+ clock-names = "clkin", "core", "sana";
+};
+
+&spifc {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&uart_AO {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&uart_A {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&uart_B {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&uart_C {
+ clocks = <&clkc CLKID_CLK81>;
+};
+
+&usb0 {
+ compatible = "amlogic,meson8-usb", "snps,dwc2";
+ clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+ clock-names = "otg";
+};
+
+&usb1 {
+ compatible = "amlogic,meson8-usb", "snps,dwc2";
+ clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+ clock-names = "otg";
+};
+
+&usb0_phy {
+ compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+ clock-names = "usb_general", "usb";
+};
+
+&usb1_phy {
+ compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+ clock-names = "usb_general", "usb";
+};
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 01:05:29 +0300