diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-kizbox3_common.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/at91-kizbox3_common.dtsi | 48 |
1 files changed, 4 insertions, 44 deletions
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi index 299e74d23184..7c3076e245ef 100644 --- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -28,7 +28,7 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - serial6 = &uart6; + serial6 = &uart8; }; chosen { @@ -207,7 +207,7 @@ }; }; - pinctrl_flx4_default: flx4_i2c2_default { + pinctrl_flx4_default: flx4_i2c6_default { pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA <PIN_PD13__FLEXCOM4_IO1>; //CLK bias-disable; @@ -299,21 +299,8 @@ status = "disabled"; uart5: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x400>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(11))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(12))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - clock-names = "usart"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx0_default>; - atmel,fifo-size = <32>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -324,22 +311,9 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; status = "disabled"; - uart6: serial@200 { - compatible = "atmel,at91sam9260-usart"; - reg = <0x200 0x400>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(17))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(18))>; - dma-names = "tx", "rx"; - clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; - clock-names = "usart"; + uart8: serial@200 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx3_default>; - atmel,fifo-size = <32>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -350,23 +324,9 @@ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "disabled"; - i2c2: i2c@600 { - compatible = "atmel,sama5d2-i2c"; - reg = <0x600 0x200>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(19))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) - | AT91_XDMAC_DT_PERID(20))>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + i2c6: i2c@600 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flx4_default>; - atmel,fifo-size = <16>; status = "disabled"; }; }; |