diff options
Diffstat (limited to 'Documentation')
45 files changed, 1030 insertions, 482 deletions
diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.html b/Documentation/RCU/Design/Data-Structures/Data-Structures.html index 6c06e10bd04b..f5120a00f511 100644 --- a/Documentation/RCU/Design/Data-Structures/Data-Structures.html +++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.html @@ -380,31 +380,26 @@ and therefore need no protection. as follows: <pre> - 1 unsigned long gpnum; - 2 unsigned long completed; + 1 unsigned long gp_seq; </pre> <p>RCU grace periods are numbered, and -the <tt>->gpnum</tt> field contains the number of the grace -period that started most recently. -The <tt>->completed</tt> field contains the number of the -grace period that completed most recently. -If the two fields are equal, the RCU grace period that most recently -started has already completed, and therefore the corresponding -flavor of RCU is idle. -If <tt>->gpnum</tt> is one greater than <tt>->completed</tt>, -then <tt>->gpnum</tt> gives the number of the current RCU -grace period, which has not yet completed. -Any other combination of values indicates that something is broken. -These two fields are protected by the root <tt>rcu_node</tt>'s +the <tt>->gp_seq</tt> field contains the current grace-period +sequence number. +The bottom two bits are the state of the current grace period, +which can be zero for not yet started or one for in progress. +In other words, if the bottom two bits of <tt>->gp_seq</tt> are +zero, the corresponding flavor of RCU is idle. +Any other value in the bottom two bits indicates that something is broken. +This field is protected by the root <tt>rcu_node</tt> structure's <tt>->lock</tt> field. -</p><p>There are <tt>->gpnum</tt> and <tt>->completed</tt> fields +</p><p>There are <tt>->gp_seq</tt> fields in the <tt>rcu_node</tt> and <tt>rcu_data</tt> structures as well. The fields in the <tt>rcu_state</tt> structure represent the -most current values, and those of the other structures are compared -in order to detect the start of a new grace period in a distributed +most current value, and those of the other structures are compared +in order to detect the beginnings and ends of grace periods in a distributed fashion. The values flow from <tt>rcu_state</tt> to <tt>rcu_node</tt> (down the tree from the root to the leaves) to <tt>rcu_data</tt>. @@ -512,27 +507,47 @@ than to be heisenbugged out of existence. as follows: <pre> - 1 unsigned long gpnum; - 2 unsigned long completed; + 1 unsigned long gp_seq; + 2 unsigned long gp_seq_needed; </pre> -<p>These fields are the counterparts of the fields of the same name in -the <tt>rcu_state</tt> structure. -They each may lag up to one behind their <tt>rcu_state</tt> -counterparts. -If a given <tt>rcu_node</tt> structure's <tt>->gpnum</tt> and -<tt>->complete</tt> fields are equal, then this <tt>rcu_node</tt> +<p>The <tt>rcu_node</tt> structures' <tt>->gp_seq</tt> fields are +the counterparts of the field of the same name in the <tt>rcu_state</tt> +structure. +They each may lag up to one step behind their <tt>rcu_state</tt> +counterpart. +If the bottom two bits of a given <tt>rcu_node</tt> structure's +<tt>->gp_seq</tt> field is zero, then this <tt>rcu_node</tt> structure believes that RCU is idle. -Otherwise, as with the <tt>rcu_state</tt> structure, -the <tt>->gpnum</tt> field will be one greater than the -<tt>->complete</tt> fields, with <tt>->gpnum</tt> -indicating which grace period this <tt>rcu_node</tt> believes -is still being waited for. +</p><p>The <tt>>gp_seq</tt> field of each <tt>rcu_node</tt> +structure is updated at the beginning and the end +of each grace period. + +<p>The <tt>->gp_seq_needed</tt> fields record the +furthest-in-the-future grace period request seen by the corresponding +<tt>rcu_node</tt> structure. The request is considered fulfilled when +the value of the <tt>->gp_seq</tt> field equals or exceeds that of +the <tt>->gp_seq_needed</tt> field. -</p><p>The <tt>>gpnum</tt> field of each <tt>rcu_node</tt> -structure is updated at the beginning -of each grace period, and the <tt>->completed</tt> fields are -updated at the end of each grace period. +<table> +<tr><th> </th></tr> +<tr><th align="left">Quick Quiz:</th></tr> +<tr><td> + Suppose that this <tt>rcu_node</tt> structure doesn't see + a request for a very long time. + Won't wrapping of the <tt>->gp_seq</tt> field cause + problems? +</td></tr> +<tr><th align="left">Answer:</th></tr> +<tr><td bgcolor="#ffffff"><font color="ffffff"> + No, because if the <tt>->gp_seq_needed</tt> field lags behind the + <tt>->gp_seq</tt> field, the <tt>->gp_seq_needed</tt> field + will be updated at the end of the grace period. + Modulo-arithmetic comparisons therefore will always get the + correct answer, even with wrapping. +</font></td></tr> +<tr><td> </td></tr> +</table> <h5>Quiescent-State Tracking</h5> @@ -626,9 +641,8 @@ normal and expedited grace periods, respectively. </ol> <p><font color="ffffff">So the locking is absolutely required in - order to coordinate - clearing of the bits with the grace-period numbers in - <tt>->gpnum</tt> and <tt>->completed</tt>. + order to coordinate clearing of the bits with updating of the + grace-period sequence number in <tt>->gp_seq</tt>. </font></td></tr> <tr><td> </td></tr> </table> @@ -1038,15 +1052,15 @@ out any <tt>rcu_data</tt> structure for which this flag is not set. as follows: <pre> - 1 unsigned long completed; - 2 unsigned long gpnum; + 1 unsigned long gp_seq; + 2 unsigned long gp_seq_needed; 3 bool cpu_no_qs; 4 bool core_needs_qs; 5 bool gpwrap; 6 unsigned long rcu_qs_ctr_snap; </pre> -<p>The <tt>completed</tt> and <tt>gpnum</tt> +<p>The <tt>->gp_seq</tt> and <tt>->gp_seq_needed</tt> fields are the counterparts of the fields of the same name in the <tt>rcu_state</tt> and <tt>rcu_node</tt> structures. They may each lag up to one behind their <tt>rcu_node</tt> @@ -1054,15 +1068,9 @@ counterparts, but in <tt>CONFIG_NO_HZ_IDLE</tt> and <tt>CONFIG_NO_HZ_FULL</tt> kernels can lag arbitrarily far behind for CPUs in dyntick-idle mode (but these counters will catch up upon exit from dyntick-idle mode). -If a given <tt>rcu_data</tt> structure's <tt>->gpnum</tt> and -<tt>->complete</tt> fields are equal, then this <tt>rcu_data</tt> +If the lower two bits of a given <tt>rcu_data</tt> structure's +<tt>->gp_seq</tt> are zero, then this <tt>rcu_data</tt> structure believes that RCU is idle. -Otherwise, as with the <tt>rcu_state</tt> and <tt>rcu_node</tt> -structure, -the <tt>->gpnum</tt> field will be one greater than the -<tt>->complete</tt> fields, with <tt>->gpnum</tt> -indicating which grace period this <tt>rcu_data</tt> believes -is still being waited for. <table> <tr><th> </th></tr> @@ -1070,13 +1078,13 @@ is still being waited for. <tr><td> All this replication of the grace period numbers can only cause massive confusion. - Why not just keep a global pair of counters and be done with it??? + Why not just keep a global sequence number and be done with it??? </td></tr> <tr><th align="left">Answer:</th></tr> <tr><td bgcolor="#ffffff"><font color="ffffff"> - Because if there was only a single global pair of grace-period + Because if there was only a single global sequence numbers, there would need to be a single global lock to allow - safely accessing and updating them. + safely accessing and updating it. And if we are not going to have a single global lock, we need to carefully manage the numbers on a per-node basis. Recall from the answer to a previous Quick Quiz that the consequences @@ -1091,8 +1099,8 @@ CPU has not yet passed through a quiescent state, while the <tt>->core_needs_qs</tt> flag indicates that the RCU core needs a quiescent state from the corresponding CPU. The <tt>->gpwrap</tt> field indicates that the corresponding -CPU has remained idle for so long that the <tt>completed</tt> -and <tt>gpnum</tt> counters are in danger of overflow, which +CPU has remained idle for so long that the +<tt>gp_seq</tt> counter is in danger of overflow, which will cause the CPU to disregard the values of its counters on its next exit from idle. Finally, the <tt>rcu_qs_ctr_snap</tt> field is used to detect @@ -1130,10 +1138,10 @@ The CPU advances the callbacks in its <tt>rcu_data</tt> structure whenever it notices that another RCU grace period has completed. The CPU detects the completion of an RCU grace period by noticing that the value of its <tt>rcu_data</tt> structure's -<tt>->completed</tt> field differs from that of its leaf +<tt>->gp_seq</tt> field differs from that of its leaf <tt>rcu_node</tt> structure. Recall that each <tt>rcu_node</tt> structure's -<tt>->completed</tt> field is updated at the end of each +<tt>->gp_seq</tt> field is updated at the beginnings and ends of each grace period. <p> diff --git a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html index 8651b0b4fd79..a346ce0116eb 100644 --- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html +++ b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.html @@ -357,7 +357,7 @@ parts, starting in this section with the various phases of grace-period initialization. <p>The first ordering-related grace-period initialization action is to -increment the <tt>rcu_state</tt> structure's <tt>->gpnum</tt> +advance the <tt>rcu_state</tt> structure's <tt>->gp_seq</tt> grace-period-number counter, as shown below: </p><p><img src="TreeRCU-gp-init-1.svg" alt="TreeRCU-gp-init-1.svg" width="75%"> @@ -388,7 +388,7 @@ its last CPU and if the next <tt>rcu_node</tt> structure has no online CPUs). <p>The final <tt>rcu_gp_init()</tt> pass through the <tt>rcu_node</tt> tree traverses breadth-first, setting each <tt>rcu_node</tt> structure's -<tt>->gpnum</tt> field to the newly incremented value from the +<tt>->gp_seq</tt> field to the newly advanced value from the <tt>rcu_state</tt> structure, as shown in the following diagram. </p><p><img src="TreeRCU-gp-init-3.svg" alt="TreeRCU-gp-init-1.svg" width="75%"> @@ -398,9 +398,9 @@ tree traverses breadth-first, setting each <tt>rcu_node</tt> structure's to notice that a new grace period has started, as described in the next section. But because the grace-period kthread started the grace period at the -root (with the increment of the <tt>rcu_state</tt> structure's -<tt>->gpnum</tt> field) before setting each leaf <tt>rcu_node</tt> -structure's <tt>->gpnum</tt> field, each CPU's observation of +root (with the advancing of the <tt>rcu_state</tt> structure's +<tt>->gp_seq</tt> field) before setting each leaf <tt>rcu_node</tt> +structure's <tt>->gp_seq</tt> field, each CPU's observation of the start of the grace period will happen after the actual start of the grace period. @@ -466,7 +466,7 @@ section that the grace period must wait on. <tr><td> But a RCU read-side critical section might have started after the beginning of the grace period - (the <tt>->gpnum++</tt> from earlier), so why should + (the advancing of <tt>->gp_seq</tt> from earlier), so why should the grace period wait on such a critical section? </td></tr> <tr><th align="left">Answer:</th></tr> @@ -609,10 +609,8 @@ states outstanding from other CPUs. <h4><a name="Grace-Period Cleanup">Grace-Period Cleanup</a></h4> <p>Grace-period cleanup first scans the <tt>rcu_node</tt> tree -breadth-first setting all the <tt>->completed</tt> fields equal -to the number of the newly completed grace period, then it sets -the <tt>rcu_state</tt> structure's <tt>->completed</tt> field, -again to the number of the newly completed grace period. +breadth-first advancing all the <tt>->gp_seq</tt> fields, then it +advances the <tt>rcu_state</tt> structure's <tt>->gp_seq</tt> field. The ordering effects are shown below: </p><p><img src="TreeRCU-gp-cleanup.svg" alt="TreeRCU-gp-cleanup.svg" width="75%"> @@ -634,7 +632,7 @@ grace-period cleanup is complete, the next grace period can begin. CPU has reported its quiescent state, but it may be some milliseconds before RCU becomes aware of this. The latest reasonable candidate is once the <tt>rcu_state</tt> - structure's <tt>->completed</tt> field has been updated, + structure's <tt>->gp_seq</tt> field has been updated, but it is quite possible that some CPUs have already completed phase two of their updates by that time. In short, if you are going to work with RCU, you need to @@ -647,7 +645,7 @@ grace-period cleanup is complete, the next grace period can begin. <h4><a name="Callback Invocation">Callback Invocation</a></h4> <p>Once a given CPU's leaf <tt>rcu_node</tt> structure's -<tt>->completed</tt> field has been updated, that CPU can begin +<tt>->gp_seq</tt> field has been updated, that CPU can begin invoking its RCU callbacks that were waiting for this grace period to end. These callbacks are identified by <tt>rcu_advance_cbs()</tt>, diff --git a/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-cleanup.svg b/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-cleanup.svg index 754f426b297a..bf84fbab27ee 100644 --- a/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-cleanup.svg +++ b/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-cleanup.svg @@ -384,11 +384,11 @@ inkscape:window-height="1144" id="namedview208" showgrid="true" - inkscape:zoom="0.70710678" - inkscape:cx="617.89017" - inkscape:cy="542.52419" - inkscape:window-x="86" - inkscape:window-y="28" + inkscape:zoom="0.78716603" + inkscape:cx="513.06403" + inkscape:cy="623.1214" + inkscape:window-x="102" + inkscape:window-y="38" inkscape:window-maximized="0" inkscape:current-layer="g3188-3" fit-margin-top="5" @@ -417,13 +417,15 @@ id="g3188"> <text xml:space="preserve" - x="3199.1516" + x="3145.9592" y="13255.592" font-style="normal" font-weight="bold" font-size="192" id="text202" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">->completed = ->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3143">rcu_seq_end(&rnp->gp_seq)</tspan></text> <g id="g3107" transform="translate(947.90548,11584.029)"> @@ -502,13 +504,15 @@ </g> <text xml:space="preserve" - x="5324.5371" - y="15414.598" + x="5264.4731" + y="15428.84" font-style="normal" font-weight="bold" font-size="192" - id="text202-753" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> + id="text202-36-7" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-5">rcu_seq_end(&rnp->gp_seq)</tspan></text> </g> <g style="fill:none;stroke-width:0.025in" @@ -547,15 +551,6 @@ sodipodi:linespacing="125%"><tspan style="font-size:159.57754517px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans" id="tspan3104-6-5-6-0">Leaf</tspan></text> - <text - xml:space="preserve" - x="7479.5796" - y="17699.943" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-9" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> <path sodipodi:nodetypes="cc" inkscape:connector-curvature="0" @@ -566,15 +561,6 @@ style="fill:none;stroke-width:0.025in" transform="translate(-737.93887,7732.6672)" id="g3188-3"> - <text - xml:space="preserve" - x="3225.7478" - y="13175.802" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-60" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">rsp->completed =</text> <g id="g3107-62" transform="translate(947.90548,11584.029)"> @@ -607,15 +593,6 @@ sodipodi:linespacing="125%"><tspan style="font-size:159.57754517px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans" id="tspan3104-6-5-7">Root</tspan></text> - <text - xml:space="preserve" - x="3225.7478" - y="13390.038" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-60-3" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"> rnp->completed</text> <flowRoot xml:space="preserve" id="flowRoot3356" @@ -627,7 +604,18 @@ height="63.63961" x="332.34018" y="681.87292" /></flowRegion><flowPara - id="flowPara3362" /></flowRoot> </g> + id="flowPara3362" /></flowRoot> <text + xml:space="preserve" + x="3156.6121" + y="13317.754" + font-style="normal" + font-weight="bold" + font-size="192" + id="text202-36-6" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-0">rcu_seq_end(&rsp->gp_seq)</tspan></text> + </g> <g style="fill:none;stroke-width:0.025in" transform="translate(-858.40227,7769.0342)" @@ -859,6 +847,17 @@ id="path3414-8-3-6-6" inkscape:connector-curvature="0" sodipodi:nodetypes="cc" /> + <text + xml:space="preserve" + x="7418.769" + y="17646.104" + font-style="normal" + font-weight="bold" + font-size="192" + id="text202-36-70" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-93">rcu_seq_end(&rnp->gp_seq)</tspan></text> </g> <g transform="translate(-1642.5377,-11611.245)" @@ -887,13 +886,15 @@ </g> <text xml:space="preserve" - x="5327.3057" + x="5274.1133" y="15428.84" font-style="normal" font-weight="bold" font-size="192" id="text202-36" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166">rcu_seq_end(&rnp->gp_seq)</tspan></text> </g> <g transform="translate(-151.71746,-11647.612)" @@ -972,13 +973,15 @@ id="tspan3104-6-5-6-0-92">Leaf</tspan></text> <text xml:space="preserve" - x="7486.4907" - y="17670.119" + x="7408.5918" + y="17619.504" font-style="normal" font-weight="bold" font-size="192" - id="text202-6" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> + id="text202-36-2" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-9">rcu_seq_end(&rnp->gp_seq)</tspan></text> </g> <g transform="translate(-6817.1997,-11647.612)" @@ -1019,13 +1022,15 @@ id="tspan3104-6-5-6-0-1">Leaf</tspan></text> <text xml:space="preserve" - x="7474.1382" - y="17688.926" + x="7416.8003" + y="17619.504" font-style="normal" font-weight="bold" font-size="192" - id="text202-5" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> + id="text202-36-3" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-56">rcu_seq_end(&rnp->gp_seq)</tspan></text> </g> <path style="fill:none;stroke:#000000;stroke-width:13.29812908px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-end:url(#Arrow2Lend)" @@ -1059,15 +1064,6 @@ id="path3414-8-3-6" inkscape:connector-curvature="0" sodipodi:nodetypes="cc" /> - <text - xml:space="preserve" - x="7318.9653" - y="6031.6353" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-2" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> <g style="fill:none;stroke-width:0.025in" id="g4504-3-9" @@ -1123,4 +1119,15 @@ id="path3134-9-0-3-5" d="m 6875.6003,15833.906 1595.7755,0" style="fill:none;stroke:#969696;stroke-width:53.19251633;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow1Send-36)" /> + <text + xml:space="preserve" + x="7275.2612" + y="5971.8916" + font-style="normal" + font-weight="bold" + font-size="192" + id="text202-36-1" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-2">rcu_seq_end(&rnp->gp_seq)</tspan></text> </svg> diff --git a/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-init-1.svg b/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-init-1.svg index 0161262904ec..8c207550818f 100644 --- a/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-init-1.svg +++ b/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-init-1.svg @@ -272,13 +272,13 @@ inkscape:window-height="1144" id="namedview208" showgrid="true" - inkscape:zoom="0.70710678" - inkscape:cx="617.89019" - inkscape:cy="636.57143" - inkscape:window-x="697" + inkscape:zoom="2.6330492" + inkscape:cx="524.82797" + inkscape:cy="519.31194" + inkscape:window-x="79" inkscape:window-y="28" inkscape:window-maximized="0" - inkscape:current-layer="svg2" + inkscape:current-layer="g3188" fit-margin-top="5" fit-margin-right="5" fit-margin-left="5" @@ -305,13 +305,15 @@ id="g3188"> <text xml:space="preserve" - x="3305.5364" + x="3119.363" y="13255.592" font-style="normal" font-weight="bold" font-size="192" id="text202" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">rsp->gpnum++</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3071">rcu_seq_start(rsp->gp_seq)</tspan></text> <g id="g3107" transform="translate(947.90548,11584.029)"> diff --git a/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-init-3.svg b/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-init-3.svg index de6ecc51b00e..d24d7d555dbc 100644 --- a/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-init-3.svg +++ b/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp-init-3.svg @@ -19,7 +19,7 @@ id="svg2" version="1.1" inkscape:version="0.48.4 r9939" - sodipodi:docname="TreeRCU-gp-init-2.svg"> + sodipodi:docname="TreeRCU-gp-init-3.svg"> <metadata id="metadata212"> <rdf:RDF> @@ -257,18 +257,22 @@ inkscape:window-width="1087" inkscape:window-height="1144" id="namedview208" - showgrid="false" - inkscape:zoom="0.70710678" + showgrid="true" + inkscape:zoom="0.68224756" inkscape:cx="617.89019" inkscape:cy="625.84293" - inkscape:window-x="697" + inkscape:window-x="54" inkscape:window-y="28" inkscape:window-maximized="0" - inkscape:current-layer="svg2" + inkscape:current-layer="g3153" fit-margin-top="5" fit-margin-right="5" fit-margin-left="5" - fit-margin-bottom="5" /> + fit-margin-bottom="5"> + <inkscape:grid + type="xygrid" + id="grid3090" /> + </sodipodi:namedview> <path sodipodi:nodetypes="cccccccccccccccccccccccc" inkscape:connector-curvature="0" @@ -281,13 +285,13 @@ id="g3188"> <text xml:space="preserve" - x="3305.5364" + x="3145.9592" y="13255.592" font-style="normal" font-weight="bold" font-size="192" id="text202" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">->gpnum = rsp->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">->gp_seq = rsp->gp_seq</text> <g id="g3107" transform="translate(947.90548,11584.029)"> @@ -366,13 +370,13 @@ </g> <text xml:space="preserve" - x="5392.3345" - y="15407.104" + x="5253.6904" + y="15407.032" font-style="normal" font-weight="bold" font-size="192" id="text202-6" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <g style="fill:none;stroke-width:0.025in" @@ -413,13 +417,13 @@ id="tspan3104-6-5-6-0">Leaf</tspan></text> <text xml:space="preserve" - x="7536.4883" - y="17640.934" + x="7415.4365" + y="17670.572" font-style="normal" font-weight="bold" font-size="192" id="text202-9" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <g transform="translate(-1642.5375,-11610.962)" @@ -448,13 +452,13 @@ </g> <text xml:space="preserve" - x="5378.4146" - y="15436.927" + x="5258.0688" + y="15412.313" font-style="normal" font-weight="bold" font-size="192" id="text202-3" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <g transform="translate(-151.71726,-11647.329)" @@ -533,13 +537,13 @@ id="tspan3104-6-5-6-0-92">Leaf</tspan></text> <text xml:space="preserve" - x="7520.1294" - y="17673.639" + x="7405.2607" + y="17670.572" font-style="normal" font-weight="bold" font-size="192" id="text202-35" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <g transform="translate(-6817.1998,-11647.329)" @@ -580,13 +584,13 @@ id="tspan3104-6-5-6-0-1">Leaf</tspan></text> <text xml:space="preserve" - x="7521.4663" - y="17666.062" + x="7413.4688" + y="17670.566" font-style="normal" font-weight="bold" font-size="192" id="text202-75" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <path style="fill:none;stroke:#000000;stroke-width:13.29812908px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-end:url(#Arrow2Lend)" @@ -622,11 +626,11 @@ sodipodi:nodetypes="cc" /> <text xml:space="preserve" - x="7370.856" - y="5997.5972" + x="7271.9297" + y="6023.2412" font-style="normal" font-weight="bold" font-size="192" id="text202-62" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </svg> diff --git a/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp.svg b/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp.svg index b13b7b01bb3a..acd73c7ad0f4 100644 --- a/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp.svg +++ b/Documentation/RCU/Design/Memory-Ordering/TreeRCU-gp.svg @@ -1070,13 +1070,13 @@ inkscape:window-height="1144" id="namedview208" showgrid="true" - inkscape:zoom="0.6004608" - inkscape:cx="826.65969" - inkscape:cy="483.3047" - inkscape:window-x="66" - inkscape:window-y="28" + inkscape:zoom="0.81932583" + inkscape:cx="840.45848" + inkscape:cy="5052.4242" + inkscape:window-x="787" + inkscape:window-y="24" inkscape:window-maximized="0" - inkscape:current-layer="svg2" + inkscape:current-layer="g4" fit-margin-top="5" fit-margin-right="5" fit-margin-left="5" @@ -1543,15 +1543,6 @@ style="fill:none;stroke-width:0.025in" transform="translate(1749.0282,658.72243)" id="g3188"> - <text - xml:space="preserve" - x="3305.5364" - y="13255.592" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-5" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">rsp->gpnum++</text> <g id="g3107-62" transform="translate(947.90548,11584.029)"> @@ -1584,6 +1575,17 @@ sodipodi:linespacing="125%"><tspan style="font-size:159.57754517px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans" id="tspan3104-6-5-7">Root</tspan></text> + <text + xml:space="preserve" + x="3137.9988" + y="13271.316" + font-style="normal" + font-weight="bold" + font-size="192" + id="text202-626" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3071">rcu_seq_start(rsp->gp_seq)</tspan></text> </g> <rect ry="0" @@ -2318,15 +2320,6 @@ style="fill:none;stroke-width:0.025in" transform="translate(1739.0986,17188.625)" id="g3188-6"> - <text - xml:space="preserve" - x="3305.5364" - y="13255.592" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-1" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">->gpnum = rsp->gpnum</text> <g id="g3107-5" transform="translate(947.90548,11584.029)"> @@ -2359,6 +2352,15 @@ sodipodi:linespacing="125%"><tspan style="font-size:159.57754517px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans" id="tspan3104-6-5-1">Root</tspan></text> + <text + xml:space="preserve" + x="3147.9268" + y="13240.524" + font-style="normal" + font-weight="bold" + font-size="192" + id="text202-1" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <g style="fill:none;stroke-width:0.025in" @@ -2387,13 +2389,13 @@ </g> <text xml:space="preserve" - x="5392.3345" - y="15407.104" + x="5263.1094" + y="15411.646" font-style="normal" font-weight="bold" font-size="192" - id="text202-6-7" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + id="text202-92" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <g style="fill:none;stroke-width:0.025in" @@ -2434,13 +2436,13 @@ id="tspan3104-6-5-6-0-94">Leaf</tspan></text> <text xml:space="preserve" - x="7536.4883" - y="17640.934" + x="7417.4053" + y="17655.502" font-style="normal" font-weight="bold" font-size="192" - id="text202-9" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + id="text202-759" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <g transform="translate(-2353.8462,17224.992)" @@ -2469,13 +2471,13 @@ </g> <text xml:space="preserve" - x="5378.4146" - y="15436.927" + x="5246.1548" + y="15411.648" font-style="normal" font-weight="bold" font-size="192" - id="text202-3" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + id="text202-87" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <g transform="translate(-863.02613,17188.625)" @@ -2554,13 +2556,13 @@ id="tspan3104-6-5-6-0-92-6">Leaf</tspan></text> <text xml:space="preserve" - x="7520.1294" - y="17673.639" + x="7433.8257" + y="17682.098" font-style="normal" font-weight="bold" font-size="192" - id="text202-35" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + id="text202-2" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <g transform="translate(-7528.5085,17188.625)" @@ -2601,13 +2603,13 @@ id="tspan3104-6-5-6-0-1-8">Leaf</tspan></text> <text xml:space="preserve" - x="7521.4663" - y="17666.062" + x="7415.4404" + y="17682.098" font-style="normal" font-weight="bold" font-size="192" - id="text202-75-1" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> + id="text202-0" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> <path style="fill:none;stroke:#000000;stroke-width:13.29812813px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-end:url(#Arrow2Lend)" @@ -2641,15 +2643,6 @@ id="path3414-8-3-6-4" inkscape:connector-curvature="0" sodipodi:nodetypes="cc" /> - <text - xml:space="preserve" - x="6659.5469" - y="34833.551" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-62" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gpnum = rsp->gpnum</text> <path sodipodi:nodetypes="ccc" inkscape:connector-curvature="0" @@ -3844,7 +3837,7 @@ font-weight="bold" font-size="192" id="text202-6-6-5" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">rdp->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">rdp->gp_seq</text> <text xml:space="preserve" x="5035.4155" @@ -4284,15 +4277,6 @@ style="fill:none;stroke-width:0.025in" transform="translate(1874.038,53203.538)" id="g3188-7"> - <text - xml:space="preserve" - x="3199.1516" - y="13255.592" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-82" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;font-family:Courier">->completed = ->gpnum</text> <g id="g3107-53" transform="translate(947.90548,11584.029)"> @@ -4325,6 +4309,17 @@ sodipodi:linespacing="125%"><tspan style="font-size:159.57754517px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans" id="tspan3104-6-5-19">Root</tspan></text> + <text + xml:space="preserve" + x="3175.896" + y="13240.11" + font-style="normal" + font-weight="bold" + font-size="192" + id="text202-36-3" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166">rcu_seq_end(&rnp->gp_seq)</tspan></text> </g> <rect ry="0" @@ -4371,13 +4366,15 @@ </g> <text xml:space="preserve" - x="5324.5371" - y="15414.598" + x="5264.4829" + y="15411.231" font-style="normal" font-weight="bold" font-size="192" - id="text202-753" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> + id="text202-36-7" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-5">rcu_seq_end(&rnp->gp_seq)</tspan></text> </g> <g style="fill:none;stroke-width:0.025in" @@ -4412,30 +4409,12 @@ sodipodi:linespacing="125%"><tspan style="font-size:159.57754517px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans" id="tspan3104-6-5-6-0-4">Leaf</tspan></text> - <text - xml:space="preserve" - x="10084.225" - y="70903.312" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-9-0" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> <path sodipodi:nodetypes="ccc" inkscape:connector-curvature="0" id="path3134-9-0-3-9" d="m 6315.6122,72629.054 -20.9533,8108.684 1648.968,0" style="fill:none;stroke:#969696;stroke-width:53.19251251;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-end:url(#Arrow1Send)" /> - <text - xml:space="preserve" - x="5092.4683" - y="74111.672" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-60" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">rsp->completed =</text> <g style="fill:none;stroke-width:0.025in" id="g3107-62-6" @@ -4469,15 +4448,6 @@ sodipodi:linespacing="125%"><tspan style="font-size:159.57754517px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:start;line-height:125%;writing-mode:lr-tb;text-anchor:start;font-family:Liberation Sans;-inkscape-font-specification:Liberation Sans" id="tspan3104-6-5-7-7">Root</tspan></text> - <text - xml:space="preserve" - x="5092.4683" - y="74325.906" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-60-3" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"> rnp->completed</text> <g style="fill:none;stroke-width:0.025in" transform="translate(1746.2528,60972.572)" @@ -4736,13 +4706,15 @@ </g> <text xml:space="preserve" - x="5327.3057" - y="15428.84" + x="5274.1216" + y="15411.231" font-style="normal" font-weight="bold" font-size="192" id="text202-36" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-6">rcu_seq_end(&rnp->gp_seq)</tspan></text> </g> <g transform="translate(-728.08545,53203.538)" @@ -4821,13 +4793,15 @@ id="tspan3104-6-5-6-0-92-5">Leaf</tspan></text> <text xml:space="preserve" - x="7486.4907" - y="17670.119" + x="7435.1987" + y="17708.281" font-style="normal" font-weight="bold" font-size="192" - id="text202-6-2" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> + id="text202-36-9" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-1">rcu_seq_end(&rnp->gp_seq)</tspan></text> </g> <g transform="translate(-7393.5687,53203.538)" @@ -4868,13 +4842,15 @@ id="tspan3104-6-5-6-0-1-5">Leaf</tspan></text> <text xml:space="preserve" - x="7474.1382" - y="17688.926" + x="7416.8125" + y="17708.281" font-style="normal" font-weight="bold" font-size="192" - id="text202-5-1" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> + id="text202-36-35" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-62">rcu_seq_end(&rnp->gp_seq)</tspan></text> </g> <path style="fill:none;stroke:#000000;stroke-width:13.29812813px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;marker-end:url(#Arrow2Lend)" @@ -4908,15 +4884,6 @@ id="path3414-8-3-6-67" inkscape:connector-curvature="0" sodipodi:nodetypes="cc" /> - <text - xml:space="preserve" - x="6742.6001" - y="70882.617" - font-style="normal" - font-weight="bold" - font-size="192" - id="text202-2" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->completed = ->gpnum</text> <g style="fill:none;stroke-width:0.025in" id="g4504-3-9-6" @@ -5131,5 +5098,47 @@ font-size="192" id="text202-7-9-6-6-7" style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">rcu_do_batch()</text> + <text + xml:space="preserve" + x="6698.9019" + y="70885.211" + font-style="normal" + font-weight="bold" + font-size="192" + id="text202-36-2" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-7">rcu_seq_end(&rnp->gp_seq)</tspan></text> + <text + xml:space="preserve" + x="10023.457" + y="70885.234" + font-style="normal" + font-weight="bold" + font-size="192" + id="text202-36-0" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-9">rcu_seq_end(&rnp->gp_seq)</tspan></text> + <text + xml:space="preserve" + x="5023.3389" + y="74209.773" + font-style="normal" + font-weight="bold" + font-size="192" + id="text202-36-36" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier"><tspan + style="font-size:172.87567139px" + id="tspan3166-0">rcu_seq_end(&rsp->gp_seq)</tspan></text> + <text + xml:space="preserve" + x="6562.5884" + y="34870.727" + font-style="normal" + font-weight="bold" + font-size="192" + id="text202-3" + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">->gp_seq = rsp->gp_seq</text> </g> </svg> diff --git a/Documentation/RCU/Design/Memory-Ordering/TreeRCU-qs.svg b/Documentation/RCU/Design/Memory-Ordering/TreeRCU-qs.svg index de3992f4cbe1..149bec2a4493 100644 --- a/Documentation/RCU/Design/Memory-Ordering/TreeRCU-qs.svg +++ b/Documentation/RCU/Design/Memory-Ordering/TreeRCU-qs.svg @@ -300,13 +300,13 @@ inkscape:window-height="1144" id="namedview208" showgrid="true" - inkscape:zoom="0.70710678" - inkscape:cx="616.47598" - inkscape:cy="595.41964" - inkscape:window-x="813" + inkscape:zoom="0.96484375" + inkscape:cx="507.0191" + inkscape:cy="885.62207" + inkscape:window-x="47" inkscape:window-y="28" inkscape:window-maximized="0" - inkscape:current-layer="g4405" + inkscape:current-layer="g3115" fit-margin-top="5" fit-margin-right="5" fit-margin-left="5" @@ -710,7 +710,7 @@ font-weight="bold" font-size="192" id="text202-6-6" - style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">rdp->gpnum</text> + style="font-size:192px;font-style:normal;font-weight:bold;text-anchor:start;fill:#000000;stroke-width:0.025in;font-family:Courier">rdp->gp_seq</text> <text xml:space="preserve" x="5035.4155" diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index 4259f95c3261..f99cf11b314b 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -172,7 +172,7 @@ it will print a message similar to the following: INFO: rcu_sched detected stalls on CPUs/tasks: 2-...: (3 GPs behind) idle=06c/0/0 softirq=1453/1455 fqs=0 16-...: (0 ticks this GP) idle=81c/0/0 softirq=764/764 fqs=0 - (detected by 32, t=2603 jiffies, g=7073, c=7072, q=625) + (detected by 32, t=2603 jiffies, g=7075, q=625) This message indicates that CPU 32 detected that CPUs 2 and 16 were both causing stalls, and that the stall was affecting RCU-sched. This message @@ -215,11 +215,10 @@ CPU since the last time that this CPU noted the beginning of a grace period. The "detected by" line indicates which CPU detected the stall (in this -case, CPU 32), how many jiffies have elapsed since the start of the -grace period (in this case 2603), the number of the last grace period -to start and to complete (7073 and 7072, respectively), and an estimate -of the total number of RCU callbacks queued across all CPUs (625 in -this case). +case, CPU 32), how many jiffies have elapsed since the start of the grace +period (in this case 2603), the grace-period sequence number (7075), and +an estimate of the total number of RCU callbacks queued across all CPUs +(625 in this case). In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed for each CPU: @@ -266,15 +265,16 @@ If the relevant grace-period kthread has been unable to run prior to the stall warning, as was the case in the "All QSes seen" line above, the following additional line is printed: - kthread starved for 23807 jiffies! g7073 c7072 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1 + kthread starved for 23807 jiffies! g7075 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1 ->cpu=5 Starving the grace-period kthreads of CPU time can of course result in RCU CPU stall warnings even when all CPUs and tasks have passed -through the required quiescent states. The "g" and "c" numbers flag the -number of the last grace period started and completed, respectively, -the "f" precedes the ->gp_flags command to the grace-period kthread, -the "RCU_GP_WAIT_FQS" indicates that the kthread is waiting for a short -timeout, and the "state" precedes value of the task_struct ->state field. +through the required quiescent states. The "g" number shows the current +grace-period sequence number, the "f" precedes the ->gp_flags command +to the grace-period kthread, the "RCU_GP_WAIT_FQS" indicates that the +kthread is waiting for a short timeout, the "state" precedes value of the +task_struct ->state field, and the "cpu" indicates that the grace-period +kthread last ran on CPU 5. Multiple Warnings From One Stall diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 65eb856526b7..c2a7facf7ff9 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -588,6 +588,7 @@ It is extremely simple: void synchronize_rcu(void) { write_lock(&rcu_gp_mutex); + smp_mb__after_spinlock(); write_unlock(&rcu_gp_mutex); } @@ -609,12 +610,15 @@ don't forget about them when submitting patches making use of RCU!] The rcu_read_lock() and rcu_read_unlock() primitive read-acquire and release a global reader-writer lock. The synchronize_rcu() -primitive write-acquires this same lock, then immediately releases -it. This means that once synchronize_rcu() exits, all RCU read-side -critical sections that were in progress before synchronize_rcu() was -called are guaranteed to have completed -- there is no way that -synchronize_rcu() would have been able to write-acquire the lock -otherwise. +primitive write-acquires this same lock, then releases it. This means +that once synchronize_rcu() exits, all RCU read-side critical sections +that were in progress before synchronize_rcu() was called are guaranteed +to have completed -- there is no way that synchronize_rcu() would have +been able to write-acquire the lock otherwise. The smp_mb__after_spinlock() +promotes synchronize_rcu() to a full memory barrier in compliance with +the "Memory-Barrier Guarantees" listed in: + + Documentation/RCU/Design/Requirements/Requirements.html. It is possible to nest rcu_read_lock(), since reader-writer locks may be recursively acquired. Note also that rcu_read_lock() is immune @@ -816,11 +820,13 @@ RCU list traversal: list_next_rcu list_for_each_entry_rcu list_for_each_entry_continue_rcu + list_for_each_entry_from_rcu hlist_first_rcu hlist_next_rcu hlist_pprev_rcu hlist_for_each_entry_rcu hlist_for_each_entry_rcu_bh + hlist_for_each_entry_from_rcu hlist_for_each_entry_continue_rcu hlist_for_each_entry_continue_rcu_bh hlist_nulls_first_rcu diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index efc7aa7a0670..5cde1ff32ff3 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2835,8 +2835,6 @@ nosync [HW,M68K] Disables sync negotiation for all devices. - notsc [BUGS=X86-32] Disable Time Stamp Counter - nowatchdog [KNL] Disable both lockup detectors, i.e. soft-lockup and NMI watchdog (hard-lockup). @@ -3632,8 +3630,8 @@ Set time (s) after boot for CPU-hotplug testing. rcutorture.onoff_interval= [KNL] - Set time (s) between CPU-hotplug operations, or - zero to disable CPU-hotplug testing. + Set time (jiffies) between CPU-hotplug operations, + or zero to disable CPU-hotplug testing. rcutorture.shuffle_interval= [KNL] Set task-shuffle interval (s). Shuffling tasks @@ -4846,3 +4844,8 @@ xirc2ps_cs= [NET,PCMCIA] Format: <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]] + + xhci-hcd.quirks [USB,KNL] + A hex value specifying bitmask with supplemental xhci + host controller quirks. Meaning of each bit can be + consulted in header drivers/usb/host/xhci.h. diff --git a/Documentation/core-api/atomic_ops.rst b/Documentation/core-api/atomic_ops.rst index 2e7165f86f55..724583453e1f 100644 --- a/Documentation/core-api/atomic_ops.rst +++ b/Documentation/core-api/atomic_ops.rst @@ -29,7 +29,7 @@ updated by one CPU, local_t is probably more appropriate. Please see local_t. The first operations to implement for atomic_t's are the initializers and -plain reads. :: +plain writes. :: #define ATOMIC_INIT(i) { (i) } #define atomic_set(v, i) ((v)->counter = (i)) diff --git a/Documentation/device-mapper/writecache.txt b/Documentation/device-mapper/writecache.txt index 4424fa2c67d7..01532b3008ae 100644 --- a/Documentation/device-mapper/writecache.txt +++ b/Documentation/device-mapper/writecache.txt @@ -15,6 +15,8 @@ Constructor parameters: size) 5. the number of optional parameters (the parameters with an argument count as two) + start_sector n (default: 0) + offset from the start of cache device in 512-byte sectors high_watermark n (default: 50) start writeback when the number of used blocks reach this watermark diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index bdadc3da9556..6970f30a3770 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -66,7 +66,7 @@ Required root node properties: - "insignal,arndale-octa" - for Exynos5420-based Insignal Arndale Octa board. - "insignal,origen" - for Exynos4210-based Insignal Origen board. - - "insignal,origen4412 - for Exynos4412-based Insignal Origen board. + - "insignal,origen4412" - for Exynos4412-based Insignal Origen board. Optional nodes: diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt index 6fddb4f4f71a..3055d5c2c04e 100644 --- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt +++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt @@ -36,7 +36,7 @@ Optional nodes: - port/ports: to describe a connection to an external encoder. The binding follows Documentation/devicetree/bindings/graph.txt and - suppors a single port with a single endpoint. + supports a single port with a single endpoint. - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt index 20fc72d9e61e..45a61b462287 100644 --- a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt @@ -1,7 +1,7 @@ Nintendo Wii (Hollywood) GPIO controller Required properties: -- compatible: "nintendo,hollywood-gpio +- compatible: "nintendo,hollywood-gpio" - reg: Physical base address and length of the controller's registers. - gpio-controller: Marks the device node as a GPIO controller. - #gpio-cells: Should be <2>. The first cell is the pin number and the diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt index 121d9b7c79a2..1063c30d53f7 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt @@ -32,7 +32,7 @@ i2c@00000000 { reg = <0x6c>; interrupt-parent = <&gpx1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&ldo15_reg>"; + vdd-supply = <&ldo15_reg>; vid-supply = <&ldo18_reg>; reset-gpios = <&gpx1 5 0>; touchscreen-size-x = <1080>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt index 5f89fb635a1b..f97fd8ab5e45 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt @@ -4,6 +4,7 @@ Required properties: - compatible : should be "ingenic,<socname>-intc". Valid strings are: ingenic,jz4740-intc + ingenic,jz4725b-intc ingenic,jz4770-intc ingenic,jz4775-intc ingenic,jz4780-intc diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt index 1099fe0788fa..f246ccbf8838 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt @@ -15,7 +15,7 @@ Required properties: include "nvidia,tegra30-ictlr". - reg : Specifies base physical address and size of the registers. Each controller must be described separately (Tegra20 has 4 of them, - whereas Tegra30 and later have 5" + whereas Tegra30 and later have 5). - interrupt-controller : Identifies the node as an interrupt controller. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The value must be 3. diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt index 20f121daa910..697ca2f26d1b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt @@ -7,6 +7,7 @@ Required properties: - "renesas,irqc-r8a73a4" (R-Mobile APE6) - "renesas,irqc-r8a7743" (RZ/G1M) - "renesas,irqc-r8a7745" (RZ/G1E) + - "renesas,irqc-r8a77470" (RZ/G1C) - "renesas,irqc-r8a7790" (R-Car H2) - "renesas,irqc-r8a7791" (R-Car M2-W) - "renesas,irqc-r8a7792" (R-Car V2H) @@ -16,6 +17,7 @@ Required properties: - "renesas,intc-ex-r8a7796" (R-Car M3-W) - "renesas,intc-ex-r8a77965" (R-Car M3-N) - "renesas,intc-ex-r8a77970" (R-Car V3M) + - "renesas,intc-ex-r8a77980" (R-Car V3H) - "renesas,intc-ex-r8a77995" (R-Car D3) - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in interrupts.txt in this directory diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt index 136bd612bd83..6a36bf66d932 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt @@ -12,7 +12,7 @@ Required properties: specifier, shall be 2 - interrupts: interrupts references to primary interrupt controller (only needed for exti controller with multiple exti under - same parent interrupt: st,stm32-exti and st,stm32h7-exti") + same parent interrupt: st,stm32-exti and st,stm32h7-exti) Example: diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt index 356c29789cf5..3a66d3c483e1 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.txt +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt @@ -152,7 +152,7 @@ Required properties: - compatible : should contain one of: "brcm,bcm7425-timers" "brcm,bcm7429-timers" - "brcm,bcm7435-timers and + "brcm,bcm7435-timers" and "brcm,brcmstb-timers" - reg : the timers register range - interrupts : the interrupt line for this timer block diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index df873d1f3b7c..f8c33890bc29 100644 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -238,7 +238,7 @@ PROPERTIES Must include one of the following: - "fsl,fman-dtsec" for dTSEC MAC - "fsl,fman-xgec" for XGEC MAC - - "fsl,fman-memac for mEMAC MAC + - "fsl,fman-memac" for mEMAC MAC - cell-index Usage: required diff --git a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt index cafe2197dad9..c3a29c5feea3 100644 --- a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt +++ b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt @@ -3,7 +3,7 @@ Required properties: - compatible: "qca,ar7100-usb-phy" - #phys-cells: should be 0 -- reset-names: "usb-phy"[, "usb-suspend-override"] +- reset-names: "phy"[, "suspend-override"] - resets: references to the reset controllers Example: @@ -11,7 +11,7 @@ Example: usb-phy { compatible = "qca,ar7100-usb-phy"; - reset-names = "usb-phy", "usb-suspend-override"; + reset-names = "phy", "suspend-override"; resets = <&rst 4>, <&rst 3>; #phy-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 9b387f861aed..7dec508987c7 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -133,7 +133,7 @@ located inside a PM domain with index 0 of a power controller represented by a node with the label "power". In the second example the consumer device are partitioned across two PM domains, the first with index 0 and the second with index 1, of a power controller that -is represented by a node with the label "power. +is represented by a node with the label "power". Optional properties: - required-opps: This contains phandle to an OPP node in another device's OPP diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt index ca69f5e3040c..ae326f263597 100644 --- a/Documentation/devicetree/bindings/regulator/tps65090.txt +++ b/Documentation/devicetree/bindings/regulator/tps65090.txt @@ -16,7 +16,7 @@ Required properties: Optional properties: - ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3. If DCDCs are externally controlled then this property should be there. -- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. +- dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. If DCDCs are externally controlled and if it is from GPIO then GPIO number should be provided. If it is externally controlled and no GPIO entry then driver will just configure this rails as external control diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt index a21658f18fe6..3661e6153a92 100644 --- a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt +++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt @@ -15,7 +15,7 @@ Please refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be st,stih407-softreset"; +- compatible: Should be "st,stih407-softreset"; - #reset-cells: 1, see below example: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt index d330c73de9a2..68b7d6207e3d 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt @@ -39,7 +39,7 @@ Required properties: Optional property: - clock-frequency: Desired I2C bus clock frequency in Hz. - When missing default to 400000Hz. + When missing default to 100000Hz. Child nodes should conform to I2C bus binding as described in i2c.txt. diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt index 6a4aadc4ce06..84b28dbe9f15 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt @@ -30,7 +30,7 @@ Required properties: Board connectors: * Headset Mic - * Secondary Mic", + * Secondary Mic * DMIC * Ext Spk diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt index aa54e49fc8a2..c7600a93ab39 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt @@ -35,7 +35,7 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio. "Digital Mic3" Audio pins and MicBias on WCD9335 Codec: - "MIC_BIAS1 + "MIC_BIAS1" "MIC_BIAS2" "MIC_BIAS3" "MIC_BIAS4" diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index b1fe7e9de1b4..18d4d0166c76 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -1,19 +1,25 @@ -Mediatek MT6577, MT6572 and MT6589 Timers ---------------------------------------- +Mediatek Timers +--------------- + +Mediatek SoCs have two different timers on different platforms, +- GPT (General Purpose Timer) +- SYST (System Timer) + +The proper timer will be selected automatically by driver. Required properties: - compatible should contain: - * "mediatek,mt2701-timer" for MT2701 compatible timers - * "mediatek,mt6580-timer" for MT6580 compatible timers - * "mediatek,mt6589-timer" for MT6589 compatible timers - * "mediatek,mt7623-timer" for MT7623 compatible timers - * "mediatek,mt8127-timer" for MT8127 compatible timers - * "mediatek,mt8135-timer" for MT8135 compatible timers - * "mediatek,mt8173-timer" for MT8173 compatible timers - * "mediatek,mt6577-timer" for MT6577 and all above compatible timers -- reg: Should contain location and length for timers register. -- clocks: Clocks driving the timer hardware. This list should include two - clocks. The order is system clock and as second clock the RTC clock. + * "mediatek,mt2701-timer" for MT2701 compatible timers (GPT) + * "mediatek,mt6580-timer" for MT6580 compatible timers (GPT) + * "mediatek,mt6589-timer" for MT6589 compatible timers (GPT) + * "mediatek,mt7623-timer" for MT7623 compatible timers (GPT) + * "mediatek,mt8127-timer" for MT8127 compatible timers (GPT) + * "mediatek,mt8135-timer" for MT8135 compatible timers (GPT) + * "mediatek,mt8173-timer" for MT8173 compatible timers (GPT) + * "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT) + * "mediatek,mt6765-timer" for MT6765 compatible timers (SYST) +- reg: Should contain location and length for timer register. +- clocks: Should contain system clock. Examples: @@ -21,5 +27,5 @@ Examples: compatible = "mediatek,mt6577-timer"; reg = <0x10008000 0x80>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>; - clocks = <&system_clk>, <&rtc_clk>; + clocks = <&system_clk>; }; diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index 252a05c5d976..c8c4b00ecb94 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -16,7 +16,8 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt +Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY +Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt - Type-C PHY Example device nodes: diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt index 6e09c35d9f1a..37091902a021 100644 --- a/Documentation/devicetree/bindings/w1/w1-gpio.txt +++ b/Documentation/devicetree/bindings/w1/w1-gpio.txt @@ -15,7 +15,7 @@ Optional properties: Examples: - onewire@0 { + onewire { compatible = "w1-gpio"; gpios = <&gpio 126 0>, <&gpio 105 0>; }; diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt index dbdf62907703..c7858dd1ea8f 100644 --- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt @@ -5,10 +5,10 @@ # # Architecture requirements # -# * arm64 +# * arm/arm64 # -# Rely on eret context synchronization when returning from IPI handler, and -# when returning to user-space. +# Rely on implicit context synchronization as a result of exception return +# when returning from IPI handler, and when returning to user-space. # # * x86 # @@ -31,7 +31,7 @@ ----------------------- | alpha: | TODO | | arc: | TODO | - | arm: | TODO | + | arm: | ok | | arm64: | ok | | c6x: | TODO | | h8300: | TODO | diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 6c9c69ec3986..114c7ce7b58d 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -50,6 +50,11 @@ LDFLAGS_MODULE -------------------------------------------------- Additional options used for $(LD) when linking modules. +KBUILD_KCONFIG +-------------------------------------------------- +Set the top-level Kconfig file to the value of this environment +variable. The default name is "Kconfig". + KBUILD_VERBOSE -------------------------------------------------- Set the kbuild verbosity. Can be assigned same values as "V=...". @@ -88,7 +93,8 @@ In most cases the name of the architecture is the same as the directory name found in the arch/ directory. But some architectures such as x86 and sparc have aliases. x86: i386 for 32 bit, x86_64 for 64 bit -sparc: sparc for 32 bit, sparc64 for 64 bit +sh: sh for 32 bit, sh64 for 64 bit +sparc: sparc32 for 32 bit, sparc64 for 64 bit CROSS_COMPILE -------------------------------------------------- @@ -148,15 +154,6 @@ stripped after they are installed. If INSTALL_MOD_STRIP is '1', then the default option --strip-debug will be used. Otherwise, INSTALL_MOD_STRIP value will be used as the options to the strip command. -INSTALL_FW_PATH --------------------------------------------------- -INSTALL_FW_PATH specifies where to install the firmware blobs. -The default value is: - - $(INSTALL_MOD_PATH)/lib/firmware - -The value can be overridden in which case the default value is ignored. - INSTALL_HDR_PATH -------------------------------------------------- INSTALL_HDR_PATH specifies where to install user space headers when diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 7233118f3a05..68c82914c0f3 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -2,9 +2,9 @@ This file contains some assistance for using "make *config". Use "make help" to list all of the possible configuration targets. -The xconfig ('qconf') and menuconfig ('mconf') programs also -have embedded help text. Be sure to check it for navigation, -search, and other general help text. +The xconfig ('qconf'), menuconfig ('mconf'), and nconfig ('nconf') +programs also have embedded help text. Be sure to check that for +navigation, search, and other general help text. ====================================================================== General @@ -17,13 +17,16 @@ this happens, using a previously working .config file and running for you, so you may find that you need to see what NEW kernel symbols have been introduced. -To see a list of new config symbols when using "make oldconfig", use +To see a list of new config symbols, use cp user/some/old.config .config make listnewconfig and the config program will list any new symbols, one per line. +Alternatively, you can use the brute force method: + + make oldconfig scripts/diffconfig .config.old .config | less ______________________________________________________________________ @@ -160,7 +163,7 @@ Searching in menuconfig: This lists all config symbols that contain "hotplug", e.g., HOTPLUG_CPU, MEMORY_HOTPLUG. - For search help, enter / followed TAB-TAB-TAB (to highlight + For search help, enter / followed by TAB-TAB (to highlight <Help>) and Enter. This will tell you that you can also use regular expressions (regexes) in the search string, so if you are not interested in MEMORY_HOTPLUG, you could try @@ -203,6 +206,39 @@ Example: ====================================================================== +nconfig +-------------------------------------------------- + +nconfig is an alternate text-based configurator. It lists function +keys across the bottom of the terminal (window) that execute commands. +You can also just use the corresponding numeric key to execute the +commands unless you are in a data entry window. E.g., instead of F6 +for Save, you can just press 6. + +Use F1 for Global help or F3 for the Short help menu. + +Searching in nconfig: + + You can search either in the menu entry "prompt" strings + or in the configuration symbols. + + Use / to begin a search through the menu entries. This does + not support regular expressions. Use <Down> or <Up> for + Next hit and Previous hit, respectively. Use <Esc> to + terminate the search mode. + + F8 (SymSearch) searches the configuration symbols for the + given string or regular expression (regex). + +NCONFIG_MODE +-------------------------------------------------- +This mode shows all sub-menus in one large tree. + +Example: + make NCONFIG_MODE=single_menu nconfig + + +====================================================================== xconfig -------------------------------------------------- @@ -230,8 +266,7 @@ gconfig Searching in gconfig: - None (gconfig isn't maintained as well as xconfig or menuconfig); - however, gconfig does have a few more viewing choices than - xconfig does. + There is no search command in gconfig. However, gconfig does + have several different viewing choices, modes, and options. ### diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index cb3b0de83fc6..10f4499e677c 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -80,6 +80,26 @@ After the instruction is single-stepped, Kprobes executes the "post_handler," if any, that is associated with the kprobe. Execution then continues with the instruction following the probepoint. +Changing Execution Path +----------------------- + +Since kprobes can probe into a running kernel code, it can change the +register set, including instruction pointer. This operation requires +maximum care, such as keeping the stack frame, recovering the execution +path etc. Since it operates on a running kernel and needs deep knowledge +of computer architecture and concurrent computing, you can easily shoot +your foot. + +If you change the instruction pointer (and set up other related +registers) in pre_handler, you must return !0 so that kprobes stops +single stepping and just returns to the given address. +This also means post_handler should not be called anymore. + +Note that this operation may be harder on some architectures which use +TOC (Table of Contents) for function call, since you have to setup a new +TOC for your function in your module, and recover the old one after +returning from it. + Return Probes ------------- @@ -262,7 +282,7 @@ is optimized, that modification is ignored. Thus, if you want to tweak the kernel's execution path, you need to suppress optimization, using one of the following techniques: -- Specify an empty function for the kprobe's post_handler or break_handler. +- Specify an empty function for the kprobe's post_handler. or @@ -474,7 +494,7 @@ error occurs during registration, all probes in the array, up to the bad probe, are safely unregistered before the register_*probes function returns. -- kps/rps/jps: an array of pointers to ``*probe`` data structures +- kps/rps: an array of pointers to ``*probe`` data structures - num: the number of the array entries. .. note:: @@ -566,12 +586,11 @@ the same handler) may run concurrently on different CPUs. Kprobes does not use mutexes or allocate memory except during registration and unregistration. -Probe handlers are run with preemption disabled. Depending on the -architecture and optimization state, handlers may also run with -interrupts disabled (e.g., kretprobe handlers and optimized kprobe -handlers run without interrupt disabled on x86/x86-64). In any case, -your handler should not yield the CPU (e.g., by attempting to acquire -a semaphore). +Probe handlers are run with preemption disabled or interrupt disabled, +which depends on the architecture and optimization state. (e.g., +kretprobe handlers and optimized kprobe handlers run without interrupt +disabled on x86/x86-64). In any case, your handler should not yield +the CPU (e.g., by attempting to acquire a semaphore, or waiting I/O). Since a return probe is implemented by replacing the return address with the trampoline's address, stack backtraces and calls diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index a02d6bbfc9d0..0d8d7ef131e9 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -2179,32 +2179,41 @@ or: event_indicated = 1; wake_up_process(event_daemon); -A write memory barrier is implied by wake_up() and co. if and only if they -wake something up. The barrier occurs before the task state is cleared, and so -sits between the STORE to indicate the event and the STORE to set TASK_RUNNING: +A general memory barrier is executed by wake_up() if it wakes something up. +If it doesn't wake anything up then a memory barrier may or may not be +executed; you must not rely on it. The barrier occurs before the task state +is accessed, in particular, it sits between the STORE to indicate the event +and the STORE to set TASK_RUNNING: - CPU 1 CPU 2 + CPU 1 (Sleeper) CPU 2 (Waker) =============================== =============================== set_current_state(); STORE event_indicated smp_store_mb(); wake_up(); - STORE current->state <write barrier> - <general barrier> STORE current->state - LOAD event_indicated + STORE current->state ... + <general barrier> <general barrier> + LOAD event_indicated if ((LOAD task->state) & TASK_NORMAL) + STORE task->state -To repeat, this write memory barrier is present if and only if something -is actually awakened. To see this, consider the following sequence of -events, where X and Y are both initially zero: +where "task" is the thread being woken up and it equals CPU 1's "current". + +To repeat, a general memory barrier is guaranteed to be executed by wake_up() +if something is actually awakened, but otherwise there is no such guarantee. +To see this, consider the following sequence of events, where X and Y are both +initially zero: CPU 1 CPU 2 =============================== =============================== - X = 1; STORE event_indicated + X = 1; Y = 1; smp_mb(); wake_up(); - Y = 1; wait_event(wq, Y == 1); - wake_up(); load from Y sees 1, no memory barrier - load from X might see 0 + LOAD Y LOAD X + +If a wakeup does occur, one (at least) of the two loads must see 1. If, on +the other hand, a wakeup does not occur, both loads might see 0. -In contrast, if a wakeup does occur, CPU 2's load from X would be guaranteed -to see 1. +wake_up_process() always executes a general memory barrier. The barrier again +occurs before the task state is accessed. In particular, if the wake_up() in +the previous snippet were replaced by a call to wake_up_process() then one of +the two loads would be guaranteed to see 1. The available waker functions include: @@ -2224,6 +2233,8 @@ The available waker functions include: wake_up_poll(); wake_up_process(); +In terms of memory ordering, these functions all provide the same guarantees of +a wake_up() (or stronger). [!] Note that the memory barriers implied by the sleeper and the waker do _not_ order multiple stores before the wake-up with respect to loads of those stored diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index c13214d073a4..d3e5dd26db12 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -1490,7 +1490,7 @@ To remove an ARP target: To configure the interval between learning packet transmits: # echo 12 > /sys/class/net/bond0/bonding/lp_interval - NOTE: the lp_inteval is the number of seconds between instances where + NOTE: the lp_interval is the number of seconds between instances where the bonding driver sends learning packets to each slaves peer switch. The default interval is 1 second. diff --git a/Documentation/networking/dpaa2/overview.rst b/Documentation/networking/dpaa2/overview.rst index 79fede4447d6..d638b5a8aadd 100644 --- a/Documentation/networking/dpaa2/overview.rst +++ b/Documentation/networking/dpaa2/overview.rst @@ -1,5 +1,6 @@ .. include:: <isonum.txt> +========================================================= DPAA2 (Data Path Acceleration Architecture Gen2) Overview ========================================================= diff --git a/Documentation/networking/e100.rst b/Documentation/networking/e100.rst index 9708f5fa76de..f81111eba9c5 100644 --- a/Documentation/networking/e100.rst +++ b/Documentation/networking/e100.rst @@ -47,41 +47,45 @@ Driver Configuration Parameters The default value for each parameter is generally the recommended setting, unless otherwise noted. -Rx Descriptors: Number of receive descriptors. A receive descriptor is a data +Rx Descriptors: + Number of receive descriptors. A receive descriptor is a data structure that describes a receive buffer and its attributes to the network controller. The data in the descriptor is used by the controller to write data from the controller to host memory. In the 3.x.x driver the valid range for this parameter is 64-256. The default value is 256. This parameter can be changed using the command:: - ethtool -G eth? rx n + ethtool -G eth? rx n Where n is the number of desired Rx descriptors. -Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data +Tx Descriptors: + Number of transmit descriptors. A transmit descriptor is a data structure that describes a transmit buffer and its attributes to the network controller. The data in the descriptor is used by the controller to read data from the host memory to the controller. In the 3.x.x driver the valid range for this parameter is 64-256. The default value is 128. This parameter can be changed using the command:: - ethtool -G eth? tx n + ethtool -G eth? tx n Where n is the number of desired Tx descriptors. -Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by +Speed/Duplex: + The driver auto-negotiates the link speed and duplex settings by default. The ethtool utility can be used as follows to force speed/duplex.:: - ethtool -s eth? autoneg off speed {10|100} duplex {full|half} + ethtool -s eth? autoneg off speed {10|100} duplex {full|half} NOTE: setting the speed/duplex to incorrect values will cause the link to fail. -Event Log Message Level: The driver uses the message level flag to log events +Event Log Message Level: + The driver uses the message level flag to log events to syslog. The message level can be set at driver load time. It can also be set using the command:: - ethtool -s eth? msglvl n + ethtool -s eth? msglvl n Additional Configurations @@ -92,7 +96,7 @@ Configuring the Driver on Different Distributions Configuring a network driver to load properly when the system is started is distribution dependent. Typically, the configuration process involves -adding an alias line to /etc/modprobe.d/*.conf as well as editing other +adding an alias line to `/etc/modprobe.d/*.conf` as well as editing other system startup scripts and/or configuration files. Many popular Linux distributions ship with tools to make these changes for you. To learn the proper way to configure a network device for your system, refer to @@ -160,7 +164,10 @@ This results in unbalanced receive traffic. If you have multiple interfaces in a server, either turn on ARP filtering by -(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter +(1) entering:: + + echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter + (this only works if your kernel's version is higher than 2.4.5), or (2) installing the interfaces in separate broadcast domains (either diff --git a/Documentation/networking/e1000.rst b/Documentation/networking/e1000.rst index 144b87eef153..f10dd4086921 100644 --- a/Documentation/networking/e1000.rst +++ b/Documentation/networking/e1000.rst @@ -34,7 +34,8 @@ Command Line Parameters The default value for each parameter is generally the recommended setting, unless otherwise noted. -NOTES: For more information about the AutoNeg, Duplex, and Speed +NOTES: + For more information about the AutoNeg, Duplex, and Speed parameters, see the "Speed and Duplex Configuration" section in this document. @@ -45,22 +46,27 @@ NOTES: For more information about the AutoNeg, Duplex, and Speed AutoNeg ------- + (Supported only on adapters with copper connections) -Valid Range: 0x01-0x0F, 0x20-0x2F -Default Value: 0x2F + +:Valid Range: 0x01-0x0F, 0x20-0x2F +:Default Value: 0x2F This parameter is a bit-mask that specifies the speed and duplex settings advertised by the adapter. When this parameter is used, the Speed and Duplex parameters must not be specified. -NOTE: Refer to the Speed and Duplex section of this readme for more +NOTE: + Refer to the Speed and Duplex section of this readme for more information on the AutoNeg parameter. Duplex ------ + (Supported only on adapters with copper connections) -Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full) -Default Value: 0 + +:Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full) +:Default Value: 0 This defines the direction in which data is allowed to flow. Can be either one or two-directional. If both Duplex and the link partner are @@ -70,18 +76,22 @@ duplex. FlowControl ----------- -Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx) -Default Value: Reads flow control settings from the EEPROM + +:Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx) +:Default Value: Reads flow control settings from the EEPROM This parameter controls the automatic generation(Tx) and response(Rx) to Ethernet PAUSE frames. InterruptThrottleRate --------------------- + (not supported on Intel(R) 82542, 82543 or 82544-based adapters) -Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, - 4=simplified balancing) -Default Value: 3 + +:Valid Range: + 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, + 4=simplified balancing) +:Default Value: 3 The driver can limit the amount of interrupts per second that the adapter will generate for incoming packets. It does this by writing a value to the @@ -135,13 +145,15 @@ Setting InterruptThrottleRate to 0 turns off any interrupt moderation and may improve small packet latency, but is generally not suitable for bulk throughput traffic. -NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and +NOTE: + InterruptThrottleRate takes precedence over the TxAbsIntDelay and RxAbsIntDelay parameters. In other words, minimizing the receive and/or transmit absolute delays does not force the controller to generate more interrupts than what the Interrupt Throttle Rate allows. -CAUTION: If you are using the Intel(R) PRO/1000 CT Network Connection +CAUTION: + If you are using the Intel(R) PRO/1000 CT Network Connection (controller 82547), setting InterruptThrottleRate to a value greater than 75,000, may hang (stop transmitting) adapters under certain network conditions. If this occurs a NETDEV @@ -151,7 +163,8 @@ CAUTION: If you are using the Intel(R) PRO/1000 CT Network Connection hang, ensure that InterruptThrottleRate is set no greater than 75,000 and is not set to 0. -NOTE: When e1000 is loaded with default settings and multiple adapters +NOTE: + When e1000 is loaded with default settings and multiple adapters are in use simultaneously, the CPU utilization may increase non- linearly. In order to limit the CPU utilization without impacting the overall throughput, we recommend that you load the driver as @@ -168,9 +181,11 @@ NOTE: When e1000 is loaded with default settings and multiple adapters RxDescriptors ------------- -Valid Range: 48-256 for 82542 and 82543-based adapters - 48-4096 for all other supported adapters -Default Value: 256 + +:Valid Range: + - 48-256 for 82542 and 82543-based adapters + - 48-4096 for all other supported adapters +:Default Value: 256 This value specifies the number of receive buffer descriptors allocated by the driver. Increasing this value allows the driver to buffer more @@ -180,15 +195,17 @@ Each descriptor is 16 bytes. A receive buffer is also allocated for each descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending on the MTU setting. The maximum MTU size is 16110. -NOTE: MTU designates the frame size. It only needs to be set for Jumbo +NOTE: + MTU designates the frame size. It only needs to be set for Jumbo Frames. Depending on the available system resources, the request for a higher number of receive descriptors may be denied. In this case, use a lower number. RxIntDelay ---------- -Valid Range: 0-65535 (0=off) -Default Value: 0 + +:Valid Range: 0-65535 (0=off) +:Default Value: 0 This value delays the generation of receive interrupts in units of 1.024 microseconds. Receive interrupt reduction can improve CPU efficiency if @@ -198,7 +215,8 @@ of TCP traffic. If the system is reporting dropped receives, this value may be set too high, causing the driver to run out of available receive descriptors. -CAUTION: When setting RxIntDelay to a value other than 0, adapters may +CAUTION: + When setting RxIntDelay to a value other than 0, adapters may hang (stop transmitting) under certain network conditions. If this occurs a NETDEV WATCHDOG message is logged in the system event log. In addition, the controller is automatically reset, @@ -207,9 +225,11 @@ CAUTION: When setting RxIntDelay to a value other than 0, adapters may RxAbsIntDelay ------------- + (This parameter is supported only on 82540, 82545 and later adapters.) -Valid Range: 0-65535 (0=off) -Default Value: 128 + +:Valid Range: 0-65535 (0=off) +:Default Value: 128 This value, in units of 1.024 microseconds, limits the delay in which a receive interrupt is generated. Useful only if RxIntDelay is non-zero, @@ -220,9 +240,11 @@ conditions. Speed ----- + (This parameter is supported only on adapters with copper connections.) -Valid Settings: 0, 10, 100, 1000 -Default Value: 0 (auto-negotiate at all supported speeds) + +:Valid Settings: 0, 10, 100, 1000 +:Default Value: 0 (auto-negotiate at all supported speeds) Speed forces the line speed to the specified value in megabits per second (Mbps). If this parameter is not specified or is set to 0 and the link @@ -231,22 +253,26 @@ speed. Duplex should also be set when Speed is set to either 10 or 100. TxDescriptors ------------- -Valid Range: 48-256 for 82542 and 82543-based adapters - 48-4096 for all other supported adapters -Default Value: 256 + +:Valid Range: + - 48-256 for 82542 and 82543-based adapters + - 48-4096 for all other supported adapters +:Default Value: 256 This value is the number of transmit descriptors allocated by the driver. Increasing this value allows the driver to queue more transmits. Each descriptor is 16 bytes. -NOTE: Depending on the available system resources, the request for a +NOTE: + Depending on the available system resources, the request for a higher number of transmit descriptors may be denied. In this case, use a lower number. TxIntDelay ---------- -Valid Range: 0-65535 (0=off) -Default Value: 8 + +:Valid Range: 0-65535 (0=off) +:Default Value: 8 This value delays the generation of transmit interrupts in units of 1.024 microseconds. Transmit interrupt reduction can improve CPU @@ -256,9 +282,11 @@ causing the driver to run out of available transmit descriptors. TxAbsIntDelay ------------- + (This parameter is supported only on 82540, 82545 and later adapters.) -Valid Range: 0-65535 (0=off) -Default Value: 32 + +:Valid Range: 0-65535 (0=off) +:Default Value: 32 This value, in units of 1.024 microseconds, limits the delay in which a transmit interrupt is generated. Useful only if TxIntDelay is non-zero, @@ -269,18 +297,21 @@ network conditions. XsumRX ------ + (This parameter is NOT supported on the 82542-based adapter.) -Valid Range: 0-1 -Default Value: 1 + +:Valid Range: 0-1 +:Default Value: 1 A value of '1' indicates that the driver should enable IP checksum offload for received packets (both UDP and TCP) to the adapter hardware. Copybreak --------- -Valid Range: 0-xxxxxxx (0=off) -Default Value: 256 -Usage: modprobe e1000.ko copybreak=128 + +:Valid Range: 0-xxxxxxx (0=off) +:Default Value: 256 +:Usage: modprobe e1000.ko copybreak=128 Driver copies all packets below or equaling this size to a fresh RX buffer before handing it up the stack. @@ -292,8 +323,9 @@ it is also available during runtime at SmartPowerDownEnable -------------------- -Valid Range: 0-1 -Default Value: 0 (disabled) + +:Valid Range: 0-1 +:Default Value: 0 (disabled) Allows PHY to turn off in lower power states. The user can turn off this parameter in supported chipsets. @@ -309,14 +341,14 @@ fiber interface board only links at 1000 Mbps full-duplex. For copper-based boards, the keywords interact as follows: - The default operation is auto-negotiate. The board advertises all +- The default operation is auto-negotiate. The board advertises all supported speed and duplex combinations, and it links at the highest common speed and duplex mode IF the link partner is set to auto-negotiate. - If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps +- If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps is advertised (The 1000BaseT spec requires auto-negotiation.) - If Speed = 10 or 100, then both Speed and Duplex should be set. Auto- +- If Speed = 10 or 100, then both Speed and Duplex should be set. Auto- negotiation is disabled, and the AutoNeg parameter is ignored. Partner SHOULD also be forced. @@ -328,13 +360,15 @@ process. The parameter may be specified as either a decimal or hexadecimal value as determined by the bitmap below. +============== ====== ====== ======= ======= ====== ====== ======= ====== Bit position 7 6 5 4 3 2 1 0 Decimal Value 128 64 32 16 8 4 2 1 Hex value 80 40 20 10 8 4 2 1 Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10 Duplex Full Full Half Full Half +============== ====== ====== ======= ======= ====== ====== ======= ====== -Some examples of using AutoNeg: +Some examples of using AutoNeg:: modprobe e1000 AutoNeg=0x01 (Restricts autonegotiation to 10 Half) modprobe e1000 AutoNeg=1 (Same as above) @@ -357,56 +391,59 @@ Additional Configurations Jumbo Frames ------------ -Jumbo Frames support is enabled by changing the MTU to a value larger -than the default of 1500. Use the ifconfig command to increase the MTU -size. For example:: + + Jumbo Frames support is enabled by changing the MTU to a value larger than + the default of 1500. Use the ifconfig command to increase the MTU size. + For example:: ifconfig eth<x> mtu 9000 up -This setting is not saved across reboots. It can be made permanent if -you add:: + This setting is not saved across reboots. It can be made permanent if + you add:: MTU=9000 -to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example -applies to the Red Hat distributions; other distributions may store this -setting in a different location. + to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example + applies to the Red Hat distributions; other distributions may store this + setting in a different location. + +Notes: + Degradation in throughput performance may be observed in some Jumbo frames + environments. If this is observed, increasing the application's socket buffer + size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help. + See the specific application manual and /usr/src/linux*/Documentation/ + networking/ip-sysctl.txt for more details. -Notes: Degradation in throughput performance may be observed in some -Jumbo frames environments. If this is observed, increasing the -application's socket buffer size and/or increasing the -/proc/sys/net/ipv4/tcp_*mem entry values may help. See the specific -application manual and /usr/src/linux*/Documentation/ -networking/ip-sysctl.txt for more details. + - The maximum MTU setting for Jumbo Frames is 16110. This value coincides + with the maximum Jumbo Frames size of 16128. -- The maximum MTU setting for Jumbo Frames is 16110. This value - coincides with the maximum Jumbo Frames size of 16128. + - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in + poor performance or loss of link. -- Using Jumbo frames at 10 or 100 Mbps is not supported and may result - in poor performance or loss of link. + - Adapters based on the Intel(R) 82542 and 82573V/E controller do not + support Jumbo Frames. These correspond to the following product names:: -- Adapters based on the Intel(R) 82542 and 82573V/E controller do not - support Jumbo Frames. These correspond to the following product names: - Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network - Connection + Intel(R) PRO/1000 Gigabit Server Adapter + Intel(R) PRO/1000 PM Network Connection ethtool ------- -The driver utilizes the ethtool interface for driver configuration and -diagnostics, as well as displaying statistical information. The ethtool -version 1.6 or later is required for this functionality. -The latest release of ethtool can be found from -https://www.kernel.org/pub/software/network/ethtool/ + The driver utilizes the ethtool interface for driver configuration and + diagnostics, as well as displaying statistical information. The ethtool + version 1.6 or later is required for this functionality. + + The latest release of ethtool can be found from + https://www.kernel.org/pub/software/network/ethtool/ Enabling Wake on LAN* (WoL) --------------------------- -WoL is configured through the ethtool* utility. -WoL will be enabled on the system during the next shut down or reboot. -For this driver version, in order to enable WoL, the e1000 driver must be -loaded when shutting down or rebooting the system. + WoL is configured through the ethtool* utility. + WoL will be enabled on the system during the next shut down or reboot. + For this driver version, in order to enable WoL, the e1000 driver must be + loaded when shutting down or rebooting the system. Support ======= diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt index 921739d00f69..7f01fb1c1084 100644 --- a/Documentation/translations/ko_KR/memory-barriers.txt +++ b/Documentation/translations/ko_KR/memory-barriers.txt @@ -1891,22 +1891,22 @@ Mandatory 배리어들은 SMP 시스템에서도 UP 시스템에서도 SMP 효 /* 소유권을 수정 */ desc->status = DEVICE_OWN; - /* MMIO 를 통해 디바이스에 공지를 하기 전에 메모리를 동기화 */ - wmb(); - /* 업데이트된 디스크립터의 디바이스에 공지 */ writel(DESC_NOTIFY, doorbell); } dma_rmb() 는 디스크립터로부터 데이터를 읽어오기 전에 디바이스가 소유권을 - 내놓았음을 보장하게 하고, dma_wmb() 는 디바이스가 자신이 소유권을 다시 - 가졌음을 보기 전에 디스크립터에 데이터가 쓰였음을 보장합니다. wmb() 는 - 캐시 일관성이 없는 (cache incoherent) MMIO 영역에 쓰기를 시도하기 전에 - 캐시 일관성이 있는 메모리 (cache coherent memory) 쓰기가 완료되었음을 - 보장해주기 위해 필요합니다. - - consistent memory 에 대한 자세한 내용을 위해선 Documentation/DMA-API.txt - 문서를 참고하세요. + 내려놓았을 것을 보장하고, dma_wmb() 는 디바이스가 자신이 소유권을 다시 + 가졌음을 보기 전에 디스크립터에 데이터가 쓰였을 것을 보장합니다. 참고로, + writel() 을 사용하면 캐시 일관성이 있는 메모리 (cache coherent memory) + 쓰기가 MMIO 영역에의 쓰기 전에 완료되었을 것을 보장하므로 writel() 앞에 + wmb() 를 실행할 필요가 없음을 알아두시기 바랍니다. writel() 보다 비용이 + 저렴한 writel_relaxed() 는 이런 보장을 제공하지 않으므로 여기선 사용되지 + 않아야 합니다. + + writel_relaxed() 와 같은 완화된 I/O 접근자들에 대한 자세한 내용을 위해서는 + "커널 I/O 배리어의 효과" 섹션을, consistent memory 에 대한 자세한 내용을 + 위해선 Documentation/DMA-API.txt 문서를 참고하세요. MMIO 쓰기 배리어 diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index d10944e619d3..cb8db4f9d097 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -4391,6 +4391,22 @@ all such vmexits. Do not enable KVM_FEATURE_PV_UNHALT if you disable HLT exits. +7.14 KVM_CAP_S390_HPAGE_1M + +Architectures: s390 +Parameters: none +Returns: 0 on success, -EINVAL if hpage module parameter was not set + or cmma is enabled + +With this capability the KVM support for memory backing with 1m pages +through hugetlbfs can be enabled for a VM. After the capability is +enabled, cmma can't be enabled anymore and pfmfi and the storage key +interpretation are disabled. If cmma has already been enabled or the +hpage module parameter is not set to 1, -EINVAL is returned. + +While it is generally possible to create a huge page backed VM without +this capability, the VM will not be able to run. + 8. Other capabilities. ---------------------- diff --git a/Documentation/x86/intel_rdt_ui.txt b/Documentation/x86/intel_rdt_ui.txt index a16aa2113840..f662d3c530e5 100644 --- a/Documentation/x86/intel_rdt_ui.txt +++ b/Documentation/x86/intel_rdt_ui.txt @@ -29,7 +29,11 @@ mount options are: L2 and L3 CDP are controlled seperately. RDT features are orthogonal. A particular system may support only -monitoring, only control, or both monitoring and control. +monitoring, only control, or both monitoring and control. Cache +pseudo-locking is a unique way of using cache control to "pin" or +"lock" data in the cache. Details can be found in +"Cache Pseudo-Locking". + The mount succeeds if either of allocation or monitoring is present, but only those files and directories supported by the system will be created. @@ -65,6 +69,29 @@ related to allocation: some platforms support devices that have their own settings for cache use which can over-ride these bits. +"bit_usage": Annotated capacity bitmasks showing how all + instances of the resource are used. The legend is: + "0" - Corresponding region is unused. When the system's + resources have been allocated and a "0" is found + in "bit_usage" it is a sign that resources are + wasted. + "H" - Corresponding region is used by hardware only + but available for software use. If a resource + has bits set in "shareable_bits" but not all + of these bits appear in the resource groups' + schematas then the bits appearing in + "shareable_bits" but no resource group will + be marked as "H". + "X" - Corresponding region is available for sharing and + used by hardware and software. These are the + bits that appear in "shareable_bits" as + well as a resource group's allocation. + "S" - Corresponding region is used by software + and available for sharing. + "E" - Corresponding region is used exclusively by + one resource group. No sharing allowed. + "P" - Corresponding region is pseudo-locked. No + sharing allowed. Memory bandwitdh(MB) subdirectory contains the following files with respect to allocation: @@ -151,6 +178,9 @@ All groups contain the following files: CPUs to/from this group. As with the tasks file a hierarchy is maintained where MON groups may only include CPUs owned by the parent CTRL_MON group. + When the resouce group is in pseudo-locked mode this file will + only be readable, reflecting the CPUs associated with the + pseudo-locked region. "cpus_list": @@ -163,6 +193,21 @@ When control is enabled all CTRL_MON groups will also contain: A list of all the resources available to this group. Each resource has its own line and format - see below for details. +"size": + Mirrors the display of the "schemata" file to display the size in + bytes of each allocation instead of the bits representing the + allocation. + +"mode": + The "mode" of the resource group dictates the sharing of its + allocations. A "shareable" resource group allows sharing of its + allocations while an "exclusive" resource group does not. A + cache pseudo-locked region is created by first writing + "pseudo-locksetup" to the "mode" file before writing the cache + pseudo-locked region's schemata to the resource group's "schemata" + file. On successful pseudo-locked region creation the mode will + automatically change to "pseudo-locked". + When monitoring is enabled all MON groups will also contain: "mon_data": @@ -379,6 +424,170 @@ L3CODE:0=fffff;1=fffff;2=fffff;3=fffff L3DATA:0=fffff;1=fffff;2=3c0;3=fffff L3CODE:0=fffff;1=fffff;2=fffff;3=fffff +Cache Pseudo-Locking +-------------------- +CAT enables a user to specify the amount of cache space that an +application can fill. Cache pseudo-locking builds on the fact that a +CPU can still read and write data pre-allocated outside its current +allocated area on a cache hit. With cache pseudo-locking, data can be +preloaded into a reserved portion of cache that no application can +fill, and from that point on will only serve cache hits. The cache +pseudo-locked memory is made accessible to user space where an +application can map it into its virtual address space and thus have +a region of memory with reduced average read latency. + +The creation of a cache pseudo-locked region is triggered by a request +from the user to do so that is accompanied by a schemata of the region +to be pseudo-locked. The cache pseudo-locked region is created as follows: +- Create a CAT allocation CLOSNEW with a CBM matching the schemata + from the user of the cache region that will contain the pseudo-locked + memory. This region must not overlap with any current CAT allocation/CLOS + on the system and no future overlap with this cache region is allowed + while the pseudo-locked region exists. +- Create a contiguous region of memory of the same size as the cache + region. +- Flush the cache, disable hardware prefetchers, disable preemption. +- Make CLOSNEW the active CLOS and touch the allocated memory to load + it into the cache. +- Set the previous CLOS as active. +- At this point the closid CLOSNEW can be released - the cache + pseudo-locked region is protected as long as its CBM does not appear in + any CAT allocation. Even though the cache pseudo-locked region will from + this point on not appear in any CBM of any CLOS an application running with + any CLOS will be able to access the memory in the pseudo-locked region since + the region continues to serve cache hits. +- The contiguous region of memory loaded into the cache is exposed to + user-space as a character device. + +Cache pseudo-locking increases the probability that data will remain +in the cache via carefully configuring the CAT feature and controlling +application behavior. There is no guarantee that data is placed in +cache. Instructions like INVD, WBINVD, CLFLUSH, etc. can still evict +“locked” data from cache. Power management C-states may shrink or +power off cache. Deeper C-states will automatically be restricted on +pseudo-locked region creation. + +It is required that an application using a pseudo-locked region runs +with affinity to the cores (or a subset of the cores) associated +with the cache on which the pseudo-locked region resides. A sanity check +within the code will not allow an application to map pseudo-locked memory +unless it runs with affinity to cores associated with the cache on which the +pseudo-locked region resides. The sanity check is only done during the +initial mmap() handling, there is no enforcement afterwards and the +application self needs to ensure it remains affine to the correct cores. + +Pseudo-locking is accomplished in two stages: +1) During the first stage the system administrator allocates a portion + of cache that should be dedicated to pseudo-locking. At this time an + equivalent portion of memory is allocated, loaded into allocated + cache portion, and exposed as a character device. +2) During the second stage a user-space application maps (mmap()) the + pseudo-locked memory into its address space. + +Cache Pseudo-Locking Interface +------------------------------ +A pseudo-locked region is created using the resctrl interface as follows: + +1) Create a new resource group by creating a new directory in /sys/fs/resctrl. +2) Change the new resource group's mode to "pseudo-locksetup" by writing + "pseudo-locksetup" to the "mode" file. +3) Write the schemata of the pseudo-locked region to the "schemata" file. All + bits within the schemata should be "unused" according to the "bit_usage" + file. + +On successful pseudo-locked region creation the "mode" file will contain +"pseudo-locked" and a new character device with the same name as the resource +group will exist in /dev/pseudo_lock. This character device can be mmap()'ed +by user space in order to obtain access to the pseudo-locked memory region. + +An example of cache pseudo-locked region creation and usage can be found below. + +Cache Pseudo-Locking Debugging Interface +--------------------------------------- +The pseudo-locking debugging interface is enabled by default (if +CONFIG_DEBUG_FS is enabled) and can be found in /sys/kernel/debug/resctrl. + +There is no explicit way for the kernel to test if a provided memory +location is present in the cache. The pseudo-locking debugging interface uses +the tracing infrastructure to provide two ways to measure cache residency of +the pseudo-locked region: +1) Memory access latency using the pseudo_lock_mem_latency tracepoint. Data + from these measurements are best visualized using a hist trigger (see + example below). In this test the pseudo-locked region is traversed at + a stride of 32 bytes while hardware prefetchers and preemption + are disabled. This also provides a substitute visualization of cache + hits and misses. +2) Cache hit and miss measurements using model specific precision counters if + available. Depending on the levels of cache on the system the pseudo_lock_l2 + and pseudo_lock_l3 tracepoints are available. + WARNING: triggering this measurement uses from two (for just L2 + measurements) to four (for L2 and L3 measurements) precision counters on + the system, if any other measurements are in progress the counters and + their corresponding event registers will be clobbered. + +When a pseudo-locked region is created a new debugfs directory is created for +it in debugfs as /sys/kernel/debug/resctrl/<newdir>. A single +write-only file, pseudo_lock_measure, is present in this directory. The +measurement on the pseudo-locked region depends on the number, 1 or 2, +written to this debugfs file. Since the measurements are recorded with the +tracing infrastructure the relevant tracepoints need to be enabled before the +measurement is triggered. + +Example of latency debugging interface: +In this example a pseudo-locked region named "newlock" was created. Here is +how we can measure the latency in cycles of reading from this region and +visualize this data with a histogram that is available if CONFIG_HIST_TRIGGERS +is set: +# :> /sys/kernel/debug/tracing/trace +# echo 'hist:keys=latency' > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/trigger +# echo 1 > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/enable +# echo 1 > /sys/kernel/debug/resctrl/newlock/pseudo_lock_measure +# echo 0 > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/enable +# cat /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/hist + +# event histogram +# +# trigger info: hist:keys=latency:vals=hitcount:sort=hitcount:size=2048 [active] +# + +{ latency: 456 } hitcount: 1 +{ latency: 50 } hitcount: 83 +{ latency: 36 } hitcount: 96 +{ latency: 44 } hitcount: 174 +{ latency: 48 } hitcount: 195 +{ latency: 46 } hitcount: 262 +{ latency: 42 } hitcount: 693 +{ latency: 40 } hitcount: 3204 +{ latency: 38 } hitcount: 3484 + +Totals: + Hits: 8192 + Entries: 9 + Dropped: 0 + +Example of cache hits/misses debugging: +In this example a pseudo-locked region named "newlock" was created on the L2 +cache of a platform. Here is how we can obtain details of the cache hits +and misses using the platform's precision counters. + +# :> /sys/kernel/debug/tracing/trace +# echo 1 > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_l2/enable +# echo 2 > /sys/kernel/debug/resctrl/newlock/pseudo_lock_measure +# echo 0 > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_l2/enable +# cat /sys/kernel/debug/tracing/trace + +# tracer: nop +# +# _-----=> irqs-off +# / _----=> need-resched +# | / _---=> hardirq/softirq +# || / _--=> preempt-depth +# ||| / delay +# TASK-PID CPU# |||| TIMESTAMP FUNCTION +# | | | |||| | | + pseudo_lock_mea-1672 [002] .... 3132.860500: pseudo_lock_l2: hits=4097 miss=0 + + Examples for RDT allocation usage: Example 1 @@ -502,7 +711,172 @@ siblings and only the real time threads are scheduled on the cores 4-7. # echo F0 > p0/cpus -4) Locking between applications +Example 4 +--------- + +The resource groups in previous examples were all in the default "shareable" +mode allowing sharing of their cache allocations. If one resource group +configures a cache allocation then nothing prevents another resource group +to overlap with that allocation. + +In this example a new exclusive resource group will be created on a L2 CAT +system with two L2 cache instances that can be configured with an 8-bit +capacity bitmask. The new exclusive resource group will be configured to use +25% of each cache instance. + +# mount -t resctrl resctrl /sys/fs/resctrl/ +# cd /sys/fs/resctrl + +First, we observe that the default group is configured to allocate to all L2 +cache: + +# cat schemata +L2:0=ff;1=ff + +We could attempt to create the new resource group at this point, but it will +fail because of the overlap with the schemata of the default group: +# mkdir p0 +# echo 'L2:0=0x3;1=0x3' > p0/schemata +# cat p0/mode +shareable +# echo exclusive > p0/mode +-sh: echo: write error: Invalid argument +# cat info/last_cmd_status +schemata overlaps + +To ensure that there is no overlap with another resource group the default +resource group's schemata has to change, making it possible for the new +resource group to become exclusive. +# echo 'L2:0=0xfc;1=0xfc' > schemata +# echo exclusive > p0/mode +# grep . p0/* +p0/cpus:0 +p0/mode:exclusive +p0/schemata:L2:0=03;1=03 +p0/size:L2:0=262144;1=262144 + +A new resource group will on creation not overlap with an exclusive resource +group: +# mkdir p1 +# grep . p1/* +p1/cpus:0 +p1/mode:shareable +p1/schemata:L2:0=fc;1=fc +p1/size:L2:0=786432;1=786432 + +The bit_usage will reflect how the cache is used: +# cat info/L2/bit_usage +0=SSSSSSEE;1=SSSSSSEE + +A resource group cannot be forced to overlap with an exclusive resource group: +# echo 'L2:0=0x1;1=0x1' > p1/schemata +-sh: echo: write error: Invalid argument +# cat info/last_cmd_status +overlaps with exclusive group + +Example of Cache Pseudo-Locking +------------------------------- +Lock portion of L2 cache from cache id 1 using CBM 0x3. Pseudo-locked +region is exposed at /dev/pseudo_lock/newlock that can be provided to +application for argument to mmap(). + +# mount -t resctrl resctrl /sys/fs/resctrl/ +# cd /sys/fs/resctrl + +Ensure that there are bits available that can be pseudo-locked, since only +unused bits can be pseudo-locked the bits to be pseudo-locked needs to be +removed from the default resource group's schemata: +# cat info/L2/bit_usage +0=SSSSSSSS;1=SSSSSSSS +# echo 'L2:1=0xfc' > schemata +# cat info/L2/bit_usage +0=SSSSSSSS;1=SSSSSS00 + +Create a new resource group that will be associated with the pseudo-locked +region, indicate that it will be used for a pseudo-locked region, and +configure the requested pseudo-locked region capacity bitmask: + +# mkdir newlock +# echo pseudo-locksetup > newlock/mode +# echo 'L2:1=0x3' > newlock/schemata + +On success the resource group's mode will change to pseudo-locked, the +bit_usage will reflect the pseudo-locked region, and the character device +exposing the pseudo-locked region will exist: + +# cat newlock/mode +pseudo-locked +# cat info/L2/bit_usage +0=SSSSSSSS;1=SSSSSSPP +# ls -l /dev/pseudo_lock/newlock +crw------- 1 root root 243, 0 Apr 3 05:01 /dev/pseudo_lock/newlock + +/* + * Example code to access one page of pseudo-locked cache region + * from user space. + */ +#define _GNU_SOURCE +#include <fcntl.h> +#include <sched.h> +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/mman.h> + +/* + * It is required that the application runs with affinity to only + * cores associated with the pseudo-locked region. Here the cpu + * is hardcoded for convenience of example. + */ +static int cpuid = 2; + +int main(int argc, char *argv[]) +{ + cpu_set_t cpuset; + long page_size; + void *mapping; + int dev_fd; + int ret; + + page_size = sysconf(_SC_PAGESIZE); + + CPU_ZERO(&cpuset); + CPU_SET(cpuid, &cpuset); + ret = sched_setaffinity(0, sizeof(cpuset), &cpuset); + if (ret < 0) { + perror("sched_setaffinity"); + exit(EXIT_FAILURE); + } + + dev_fd = open("/dev/pseudo_lock/newlock", O_RDWR); + if (dev_fd < 0) { + perror("open"); + exit(EXIT_FAILURE); + } + + mapping = mmap(0, page_size, PROT_READ | PROT_WRITE, MAP_SHARED, + dev_fd, 0); + if (mapping == MAP_FAILED) { + perror("mmap"); + close(dev_fd); + exit(EXIT_FAILURE); + } + + /* Application interacts with pseudo-locked memory @mapping */ + + ret = munmap(mapping, page_size); + if (ret < 0) { + perror("munmap"); + close(dev_fd); + exit(EXIT_FAILURE); + } + + close(dev_fd); + exit(EXIT_SUCCESS); +} + +Locking between applications +---------------------------- Certain operations on the resctrl filesystem, composed of read/writes to/from multiple files, must be atomic. @@ -510,7 +884,7 @@ to/from multiple files, must be atomic. As an example, the allocation of an exclusive reservation of L3 cache involves: - 1. Read the cbmmasks from each directory + 1. Read the cbmmasks from each directory or the per-resource "bit_usage" 2. Find a contiguous set of bits in the global CBM bitmask that is clear in any of the directory cbmmasks 3. Create a new directory diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index 8d109ef67ab6..ad6d2a80cf05 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -92,9 +92,7 @@ APICs Timing notsc - Don't use the CPU time stamp counter to read the wall time. - This can be used to work around timing problems on multiprocessor systems - with not properly synchronized CPUs. + Deprecated, use tsc=unstable instead. nohpet Don't use the HPET timer. @@ -156,6 +154,10 @@ NUMA If given as an integer, fills all system RAM with N fake nodes interleaved over physical nodes. + numa=fake=<N>U + If given as an integer followed by 'U', it will divide each + physical node into N emulated nodes. + ACPI acpi=off Don't enable ACPI |
