diff options
Diffstat (limited to 'Documentation')
31 files changed, 698 insertions, 200 deletions
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index 2a3fcc55e981..d9aa43d78bcc 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -609,3 +609,109 @@ size is the size (and should be a page-sized multiple). The return value will be either a pointer to the processor virtual address of the memory, or an error (via PTR_ERR()) if any part of the region is occupied. + +Part III - Debug drivers use of the DMA-API +------------------------------------------- + +The DMA-API as described above as some constraints. DMA addresses must be +released with the corresponding function with the same size for example. With +the advent of hardware IOMMUs it becomes more and more important that drivers +do not violate those constraints. In the worst case such a violation can +result in data corruption up to destroyed filesystems. + +To debug drivers and find bugs in the usage of the DMA-API checking code can +be compiled into the kernel which will tell the developer about those +violations. If your architecture supports it you can select the "Enable +debugging of DMA-API usage" option in your kernel configuration. Enabling this +option has a performance impact. Do not enable it in production kernels. + +If you boot the resulting kernel will contain code which does some bookkeeping +about what DMA memory was allocated for which device. If this code detects an +error it prints a warning message with some details into your kernel log. An +example warning message may look like this: + +------------[ cut here ]------------ +WARNING: at /data2/repos/linux-2.6-iommu/lib/dma-debug.c:448 + check_unmap+0x203/0x490() +Hardware name: +forcedeth 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong + function [device address=0x00000000640444be] [size=66 bytes] [mapped as +single] [unmapped as page] +Modules linked in: nfsd exportfs bridge stp llc r8169 +Pid: 0, comm: swapper Tainted: G W 2.6.28-dmatest-09289-g8bb99c0 #1 +Call Trace: + <IRQ> [<ffffffff80240b22>] warn_slowpath+0xf2/0x130 + [<ffffffff80647b70>] _spin_unlock+0x10/0x30 + [<ffffffff80537e75>] usb_hcd_link_urb_to_ep+0x75/0xc0 + [<ffffffff80647c22>] _spin_unlock_irqrestore+0x12/0x40 + [<ffffffff8055347f>] ohci_urb_enqueue+0x19f/0x7c0 + [<ffffffff80252f96>] queue_work+0x56/0x60 + [<ffffffff80237e10>] enqueue_task_fair+0x20/0x50 + [<ffffffff80539279>] usb_hcd_submit_urb+0x379/0xbc0 + [<ffffffff803b78c3>] cpumask_next_and+0x23/0x40 + [<ffffffff80235177>] find_busiest_group+0x207/0x8a0 + [<ffffffff8064784f>] _spin_lock_irqsave+0x1f/0x50 + [<ffffffff803c7ea3>] check_unmap+0x203/0x490 + [<ffffffff803c8259>] debug_dma_unmap_page+0x49/0x50 + [<ffffffff80485f26>] nv_tx_done_optimized+0xc6/0x2c0 + [<ffffffff80486c13>] nv_nic_irq_optimized+0x73/0x2b0 + [<ffffffff8026df84>] handle_IRQ_event+0x34/0x70 + [<ffffffff8026ffe9>] handle_edge_irq+0xc9/0x150 + [<ffffffff8020e3ab>] do_IRQ+0xcb/0x1c0 + [<ffffffff8020c093>] ret_from_intr+0x0/0xa + <EOI> <4>---[ end trace f6435a98e2a38c0e ]--- + +The driver developer can find the driver and the device including a stacktrace +of the DMA-API call which caused this warning. + +Per default only the first error will result in a warning message. All other +errors will only silently counted. This limitation exist to prevent the code +from flooding your kernel log. To support debugging a device driver this can +be disabled via debugfs. See the debugfs interface documentation below for +details. + +The debugfs directory for the DMA-API debugging code is called dma-api/. In +this directory the following files can currently be found: + + dma-api/all_errors This file contains a numeric value. If this + value is not equal to zero the debugging code + will print a warning for every error it finds + into the kernel log. Be carefull with this + option. It can easily flood your logs. + + dma-api/disabled This read-only file contains the character 'Y' + if the debugging code is disabled. This can + happen when it runs out of memory or if it was + disabled at boot time + + dma-api/error_count This file is read-only and shows the total + numbers of errors found. + + dma-api/num_errors The number in this file shows how many + warnings will be printed to the kernel log + before it stops. This number is initialized to + one at system boot and be set by writing into + this file + + dma-api/min_free_entries + This read-only file can be read to get the + minimum number of free dma_debug_entries the + allocator has ever seen. If this value goes + down to zero the code will disable itself + because it is not longer reliable. + + dma-api/num_free_entries + The current number of free dma_debug_entries + in the allocator. + +If you have this code compiled into your kernel it will be enabled by default. +If you want to boot without the bookkeeping anyway you can provide +'dma_debug=off' as a boot parameter. This will disable DMA-API debugging. +Notice that you can not enable it again at runtime. You have to reboot to do +so. + +When the code disables itself at runtime this is most likely because it ran +out of dma_debug_entries. These entries are preallocated at boot. The number +of preallocated entries is defined per architecture. If it is too low for you +boot with 'dma_debug_entries=<your_desired_number>' to overwrite the +architectural default. diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c index 8c6396e4bf31..a5b11793b1e0 100644 --- a/Documentation/DocBook/procfs_example.c +++ b/Documentation/DocBook/procfs_example.c @@ -117,9 +117,6 @@ static int __init init_procfs_example(void) rv = -ENOMEM; goto out; } - - example_dir->owner = THIS_MODULE; - /* create jiffies using convenience function */ jiffies_file = create_proc_read_entry("jiffies", 0444, example_dir, @@ -130,8 +127,6 @@ static int __init init_procfs_example(void) goto no_jiffies; } - jiffies_file->owner = THIS_MODULE; - /* create foo and bar files using same callback * functions */ @@ -146,7 +141,6 @@ static int __init init_procfs_example(void) foo_file->data = &foo_data; foo_file->read_proc = proc_read_foobar; foo_file->write_proc = proc_write_foobar; - foo_file->owner = THIS_MODULE; bar_file = create_proc_entry("bar", 0644, example_dir); if(bar_file == NULL) { @@ -159,7 +153,6 @@ static int __init init_procfs_example(void) bar_file->data = &bar_data; bar_file->read_proc = proc_read_foobar; bar_file->write_proc = proc_write_foobar; - bar_file->owner = THIS_MODULE; /* create symlink */ symlink = proc_symlink("jiffies_too", example_dir, @@ -169,8 +162,6 @@ static int __init init_procfs_example(void) goto no_symlink; } - symlink->owner = THIS_MODULE; - /* everything OK */ printk(KERN_INFO "%s %s initialised\n", MODULE_NAME, MODULE_VERS); diff --git a/Documentation/Smack.txt b/Documentation/Smack.txt index 989c2fcd8111..629c92e99783 100644 --- a/Documentation/Smack.txt +++ b/Documentation/Smack.txt @@ -184,14 +184,16 @@ length. Single character labels using special characters, that being anything other than a letter or digit, are reserved for use by the Smack development team. Smack labels are unstructured, case sensitive, and the only operation ever performed on them is comparison for equality. Smack labels cannot -contain unprintable characters or the "/" (slash) character. +contain unprintable characters or the "/" (slash) character. Smack labels +cannot begin with a '-', which is reserved for special options. There are some predefined labels: - _ Pronounced "floor", a single underscore character. - ^ Pronounced "hat", a single circumflex character. - * Pronounced "star", a single asterisk character. - ? Pronounced "huh", a single question mark character. + _ Pronounced "floor", a single underscore character. + ^ Pronounced "hat", a single circumflex character. + * Pronounced "star", a single asterisk character. + ? Pronounced "huh", a single question mark character. + @ Pronounced "Internet", a single at sign character. Every task on a Smack system is assigned a label. System tasks, such as init(8) and systems daemons, are run with the floor ("_") label. User tasks @@ -412,6 +414,36 @@ sockets. A privileged program may set this to match the label of another task with which it hopes to communicate. +Smack Netlabel Exceptions + +You will often find that your labeled application has to talk to the outside, +unlabeled world. To do this there's a special file /smack/netlabel where you can +add some exceptions in the form of : +@IP1 LABEL1 or +@IP2/MASK LABEL2 + +It means that your application will have unlabeled access to @IP1 if it has +write access on LABEL1, and access to the subnet @IP2/MASK if it has write +access on LABEL2. + +Entries in the /smack/netlabel file are matched by longest mask first, like in +classless IPv4 routing. + +A special label '@' and an option '-CIPSO' can be used there : +@ means Internet, any application with any label has access to it +-CIPSO means standard CIPSO networking + +If you don't know what CIPSO is and don't plan to use it, you can just do : +echo 127.0.0.1 -CIPSO > /smack/netlabel +echo 0.0.0.0/0 @ > /smack/netlabel + +If you use CIPSO on your 192.168.0.0/16 local network and need also unlabeled +Internet access, you can have : +echo 127.0.0.1 -CIPSO > /smack/netlabel +echo 192.168.0.0/16 -CIPSO > /smack/netlabel +echo 0.0.0.0/0 @ > /smack/netlabel + + Writing Applications for Smack There are three sorts of applications that will run on a Smack system. How an diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index f2e908d7f90d..2f21ecd4c205 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -25,7 +25,7 @@ use IO::Handle; "tda10046lifeview", "av7110", "dec2000t", "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", "or51211", "or51132_qam", "or51132_vsb", "bluebird", - "opera1"); + "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" ); # Check args syntax() if (scalar(@ARGV) != 1); @@ -37,8 +37,8 @@ for ($i=0; $i < scalar(@components); $i++) { $outfile = eval($cid); die $@ if $@; print STDERR <<EOF; -Firmware $outfile extracted successfully. -Now copy it to either /usr/lib/hotplug/firmware or /lib/firmware +Firmware(s) $outfile extracted successfully. +Now copy it(they) to either /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). EOF exit(0); @@ -345,6 +345,85 @@ sub or51211 { $fwfile; } +sub cx231xx { + my $fwfile = "v4l-cx231xx-avcore-01.fw"; + my $url = "http://linuxtv.org/downloads/firmware/$fwfile"; + my $hash = "7d3bb956dc9df0eafded2b56ba57cc42"; + + checkstandard(); + + wgetfile($fwfile, $url); + verify($fwfile, $hash); + + $fwfile; +} + +sub cx18 { + my $url = "http://linuxtv.org/downloads/firmware/"; + + my %files = ( + 'v4l-cx23418-apu.fw' => '588f081b562f5c653a3db1ad8f65939a', + 'v4l-cx23418-cpu.fw' => 'b6c7ed64bc44b1a6e0840adaeac39d79', + 'v4l-cx23418-dig.fw' => '95bc688d3e7599fd5800161e9971cc55', + ); + + checkstandard(); + + my $allfiles; + foreach my $fwfile (keys %files) { + wgetfile($fwfile, "$url/$fwfile"); + verify($fwfile, $files{$fwfile}); + $allfiles .= " $fwfile"; + } + + $allfiles =~ s/^\s//; + + $allfiles; +} + +sub cx23885 { + my $url = "http://linuxtv.org/downloads/firmware/"; + + my %files = ( + 'v4l-cx23885-avcore-01.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb', + 'v4l-cx23885-enc.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb', + ); + + checkstandard(); + + my $allfiles; + foreach my $fwfile (keys %files) { + wgetfile($fwfile, "$url/$fwfile"); + verify($fwfile, $files{$fwfile}); + $allfiles .= " $fwfile"; + } + + $allfiles =~ s/^\s//; + + $allfiles; +} + +sub pvrusb2 { + my $url = "http://linuxtv.org/downloads/firmware/"; + + my %files = ( + 'v4l-cx25840.fw' => 'dadb79e9904fc8af96e8111d9cb59320', + ); + + checkstandard(); + + my $allfiles; + foreach my $fwfile (keys %files) { + wgetfile($fwfile, "$url/$fwfile"); + verify($fwfile, $files{$fwfile}); + $allfiles .= " $fwfile"; + } + + $allfiles =~ s/^\s//; + + $allfiles; +} + sub or51132_qam { my $fwfile = "dvb-fe-or51132-qam.fw"; my $url = "http://linuxtv.org/downloads/firmware/$fwfile"; diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 7907586c6e08..5e02b83ac12b 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -64,10 +64,10 @@ Who: Pavel Machek <pavel@suse.cz> --------------------------- -What: Video4Linux API 1 ioctls and video_decoder.h from Video devices. -When: December 2008 -Files: include/linux/video_decoder.h include/linux/videodev.h -Check: include/linux/video_decoder.h include/linux/videodev.h +What: Video4Linux API 1 ioctls and from Video devices. +When: July 2009 +Files: include/linux/videodev.h +Check: include/linux/videodev.h Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6 series. The old API have lots of drawbacks and don't provide enough means to work with all video and audio standards. The newer API is @@ -356,17 +356,6 @@ Who: Hans de Goede <hdegoede@redhat.com> --------------------------- -What: SELinux "compat_net" functionality -When: 2.6.30 at the earliest -Why: In 2.6.18 the Secmark concept was introduced to replace the "compat_net" - network access control functionality of SELinux. Secmark offers both - better performance and greater flexibility than the "compat_net" - mechanism. Now that the major Linux distributions have moved to - Secmark, it is time to deprecate the older mechanism and start the - process of removing the old code. -Who: Paul Moore <paul.moore@hp.com> ---------------------------- - What: sysfs ui for changing p4-clockmod parameters When: September 2009 Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and diff --git a/Documentation/hwmon/ds1621 b/Documentation/hwmon/ds1621 index 1fee6f1e6bc5..5e97f333c4df 100644 --- a/Documentation/hwmon/ds1621 +++ b/Documentation/hwmon/ds1621 @@ -49,12 +49,9 @@ of up to +/- 0.5 degrees even when compared against precise temperature readings. Be sure to have a high vs. low temperature limit gap of al least 1.0 degree Celsius to avoid Tout "bouncing", though! -As for alarms, you can read the alarm status of the DS1621 via the 'alarms' -/sys file interface. The result consists mainly of bit 6 and 5 of the -configuration register of the chip; bit 6 (0x40 or 64) is the high alarm -bit and bit 5 (0x20 or 32) the low one. These bits are set when the high or -low limits are met or exceeded and are reset by the module as soon as the -respective temperature ranges are left. +The alarm bits are set when the high or low limits are met or exceeded and +are reset by the module as soon as the respective temperature ranges are +left. The alarm registers are in no way suitable to find out about the actual status of Tout. They will only tell you about its history, whether or not @@ -64,45 +61,3 @@ with neither of the alarms set. Temperature conversion of the DS1621 takes up to 1000ms; internal access to non-volatile registers may last for 10ms or below. - -High Accuracy Temperature Reading ---------------------------------- - -As said before, the temperature issued via the 9-bit i2c-bus data is -somewhat arbitrary. Internally, the temperature conversion is of a -different kind that is explained (not so...) well in the DS1621 data sheet. -To cut the long story short: Inside the DS1621 there are two oscillators, -both of them biassed by a temperature coefficient. - -Higher resolution of the temperature reading can be achieved using the -internal projection, which means taking account of REG_COUNT and REG_SLOPE -(the driver manages them): - -Taken from Dallas Semiconductors App Note 068: 'Increasing Temperature -Resolution on the DS1620' and App Note 105: 'High Resolution Temperature -Measurement with Dallas Direct-to-Digital Temperature Sensors' - -- Read the 9-bit temperature and strip the LSB (Truncate the .5 degs) -- The resulting value is TEMP_READ. -- Then, read REG_COUNT. -- And then, REG_SLOPE. - - TEMP = TEMP_READ - 0.25 + ((REG_SLOPE - REG_COUNT) / REG_SLOPE) - -Note that this is what the DONE bit in the DS1621 configuration register is -good for: Internally, one temperature conversion takes up to 1000ms. Before -that conversion is complete you will not be able to read valid things out -of REG_COUNT and REG_SLOPE. The DONE bit, as you may have guessed by now, -tells you whether the conversion is complete ("done", in plain English) and -thus, whether the values you read are good or not. - -The DS1621 has two modes of operation: "Continuous" conversion, which can -be understood as the default stand-alone mode where the chip gets the -temperature and controls external devices via its Tout pin or tells other -i2c's about it if they care. The other mode is called "1SHOT", that means -that it only figures out about the temperature when it is explicitly told -to do so; this can be seen as power saving mode. - -Now if you want to read REG_COUNT and REG_SLOPE, you have to either stop -the continuous conversions until the contents of these registers are valid, -or, in 1SHOT mode, you have to have one conversion made. diff --git a/Documentation/i2c/chips/pcf8591 b/Documentation/hwmon/pcf8591 index 5628fcf4207f..5628fcf4207f 100644 --- a/Documentation/i2c/chips/pcf8591 +++ b/Documentation/hwmon/pcf8591 diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 6dbfd5efd991..2f10ce6a879f 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -365,6 +365,7 @@ energy[1-*]_input Cumulative energy use Unit: microJoule RO + ********** * Alarms * ********** @@ -453,6 +454,27 @@ beep_mask Bitmask for beep. RW +*********************** +* Intrusion detection * +*********************** + +intrusion[0-*]_alarm + Chassis intrusion detection + 0: OK + 1: intrusion detected + RW + Contrary to regular alarm flags which clear themselves + automatically when read, this one sticks until cleared by + the user. This is done by writing 0 to the file. Writing + other values is unsupported. + +intrusion[0-*]_beep + Chassis intrusion beep + 0: disable + 1: enable + RW + + sysfs attribute writes interpretation ------------------------------------- diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf index d6e1ae30fa6e..b6eb59384bb3 100644 --- a/Documentation/hwmon/w83627ehf +++ b/Documentation/hwmon/w83627ehf @@ -2,30 +2,40 @@ Kernel driver w83627ehf ======================= Supported chips: - * Winbond W83627EHF/EHG/DHG (ISA access ONLY) + * Winbond W83627EHF/EHG (ISA access ONLY) Prefix: 'w83627ehf' Addresses scanned: ISA address retrieved from Super I/O registers Datasheet: - http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83627EHF_%20W83627EHGb.pdf - DHG datasheet confidential. + http://www.nuvoton.com.tw/NR/rdonlyres/A6A258F0-F0C9-4F97-81C0-C4D29E7E943E/0/W83627EHF.pdf + * Winbond W83627DHG + Prefix: 'w83627dhg' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: + http://www.nuvoton.com.tw/NR/rdonlyres/7885623D-A487-4CF9-A47F-30C5F73D6FE6/0/W83627DHG.pdf + * Winbond W83667HG + Prefix: 'w83667hg' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: not available Authors: Jean Delvare <khali@linux-fr.org> Yuan Mu (Winbond) Rudolf Marek <r.marek@assembler.cz> David Hubbard <david.c.hubbard@gmail.com> + Gong Jun <JGong@nuvoton.com> Description ----------- -This driver implements support for the Winbond W83627EHF, W83627EHG, and -W83627DHG super I/O chips. We will refer to them collectively as Winbond chips. +This driver implements support for the Winbond W83627EHF, W83627EHG, +W83627DHG and W83667HG super I/O chips. We will refer to them collectively +as Winbond chips. The chips implement three temperature sensors, five fan rotation speed sensors, ten analog voltage sensors (only nine for the 627DHG), one -VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG), alarms with beep -warnings (control unimplemented), and some automatic fan regulation -strategies (plus manual fan control mode). +VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG and 667HG), alarms +with beep warnings (control unimplemented), and some automatic fan +regulation strategies (plus manual fan control mode). Temperatures are measured in degrees Celsius and measurement resolution is 1 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when @@ -54,7 +64,8 @@ follows: temp1 -> pwm1 temp2 -> pwm2 temp3 -> pwm3 -prog -> pwm4 (the programmable setting is not supported by the driver) +prog -> pwm4 (not on 667HG; the programmable setting is not supported by + the driver) /sys files ---------- diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index f1d639903325..1f779a25c703 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -122,10 +122,8 @@ Code Seq# Include File Comments 'c' 00-7F linux/coda.h conflict! 'c' 80-9F arch/s390/include/asm/chsc.h 'd' 00-FF linux/char/drm/drm/h conflict! -'d' 00-DF linux/video_decoder.h conflict! 'd' F0-FF linux/digi1.h 'e' all linux/digi1.h conflict! -'e' 00-1F linux/video_encoder.h conflict! 'e' 00-1F net/irda/irtty.h conflict! 'f' 00-1F linux/ext2_fs.h 'h' 00-7F Charon filesystem diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d1e2fcb6298b..aeedb89a307a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -492,6 +492,16 @@ and is between 256 and 4096 characters. It is defined in the file Range: 0 - 8192 Default: 64 + dma_debug=off If the kernel is compiled with DMA_API_DEBUG support + this option disables the debugging code at boot. + + dma_debug_entries=<number> + This option allows to tune the number of preallocated + entries for DMA-API debugging code. One entry is + required per DMA-API allocation. Use this if the + DMA-API debugging code disables itself because the + architectural default is too low. + hpet= [X86-32,HPET] option to control HPET usage Format: { enable (default) | disable | force | verbose } @@ -2030,15 +2040,6 @@ and is between 256 and 4096 characters. It is defined in the file If enabled at boot time, /selinux/disable can be used later to disable prior to initial policy load. - selinux_compat_net = - [SELINUX] Set initial selinux_compat_net flag value. - Format: { "0" | "1" } - 0 -- use new secmark-based packet controls - 1 -- use legacy packet controls - Default value is 0 (preferred). - Value can be changed at runtime via - /selinux/compat_net. - serialnumber [BUGS=X86-32] shapers= [NET] diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index f2dbbf3bdeab..d36fcc0f2715 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -1630,6 +1630,13 @@ static bool service_io(struct device *dev) } } + /* OK, so we noted that it was pretty poor to use an fdatasync as a + * barrier. But Christoph Hellwig points out that we need a sync + * *afterwards* as well: "Barriers specify no reordering to the front + * or the back." And Jens Axboe confirmed it, so here we are: */ + if (out->type & VIRTIO_BLK_T_BARRIER) + fdatasync(vblk->fd); + /* We can't trigger an IRQ, because we're not the Launcher. It does * that when we tell it we're done. */ add_used(dev->vq, head, wlen); diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt index 488773018152..938ea22f2cc0 100644 --- a/Documentation/lockdep-design.txt +++ b/Documentation/lockdep-design.txt @@ -27,33 +27,37 @@ lock-class. State ----- -The validator tracks lock-class usage history into 5 separate state bits: +The validator tracks lock-class usage history into 4n + 1 separate state bits: -- 'ever held in hardirq context' [ == hardirq-safe ] -- 'ever held in softirq context' [ == softirq-safe ] -- 'ever held with hardirqs enabled' [ == hardirq-unsafe ] -- 'ever held with softirqs and hardirqs enabled' [ == softirq-unsafe ] +- 'ever held in STATE context' +- 'ever head as readlock in STATE context' +- 'ever head with STATE enabled' +- 'ever head as readlock with STATE enabled' + +Where STATE can be either one of (kernel/lockdep_states.h) + - hardirq + - softirq + - reclaim_fs - 'ever used' [ == !unused ] -When locking rules are violated, these 4 state bits are presented in the -locking error messages, inside curlies. A contrived example: +When locking rules are violated, these state bits are presented in the +locking error messages, inside curlies. A contrived example: modprobe/2287 is trying to acquire lock: - (&sio_locks[i].lock){--..}, at: [<c02867fd>] mutex_lock+0x21/0x24 + (&sio_locks[i].lock){-.-...}, at: [<c02867fd>] mutex_lock+0x21/0x24 but task is already holding lock: - (&sio_locks[i].lock){--..}, at: [<c02867fd>] mutex_lock+0x21/0x24 + (&sio_locks[i].lock){-.-...}, at: [<c02867fd>] mutex_lock+0x21/0x24 -The bit position indicates hardirq, softirq, hardirq-read, -softirq-read respectively, and the character displayed in each -indicates: +The bit position indicates STATE, STATE-read, for each of the states listed +above, and the character displayed in each indicates: '.' acquired while irqs disabled '+' acquired in irq context '-' acquired with irqs enabled - '?' read acquired in irq context with irqs enabled. + '?' acquired in irq context with irqs enabled. Unused mutexes cannot be part of the cause of an error. diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt index cc453110fc46..0732cdd05ba1 100644 --- a/Documentation/powerpc/dts-bindings/fsl/dma.txt +++ b/Documentation/powerpc/dts-bindings/fsl/dma.txt @@ -35,30 +35,30 @@ Example: #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <82a8 4>; - ranges = <0 8100 1a4>; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a4>; interrupt-parent = <&ipic>; - interrupts = <47 8>; + interrupts = <71 8>; cell-index = <0>; dma-channel@0 { compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; cell-index = <0>; - reg = <0 80>; + reg = <0 0x80>; }; dma-channel@80 { compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; cell-index = <1>; - reg = <80 80>; + reg = <0x80 0x80>; }; dma-channel@100 { compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; cell-index = <2>; - reg = <100 80>; + reg = <0x100 0x80>; }; dma-channel@180 { compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; cell-index = <3>; - reg = <180 80>; + reg = <0x180 0x80>; }; }; @@ -93,36 +93,36 @@ Example: #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <21300 4>; - ranges = <0 21100 200>; + reg = <0x21300 4>; + ranges = <0 0x21100 0x200>; cell-index = <0>; dma-channel@0 { compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0 80>; + reg = <0 0x80>; cell-index = <0>; interrupt-parent = <&mpic>; - interrupts = <14 2>; + interrupts = <20 2>; }; dma-channel@80 { compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <80 80>; + reg = <0x80 0x80>; cell-index = <1>; interrupt-parent = <&mpic>; - interrupts = <15 2>; + interrupts = <21 2>; }; dma-channel@100 { compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <100 80>; + reg = <0x100 0x80>; cell-index = <2>; interrupt-parent = <&mpic>; - interrupts = <16 2>; + interrupts = <22 2>; }; dma-channel@180 { compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <180 80>; + reg = <0x180 0x80>; cell-index = <3>; interrupt-parent = <&mpic>; - interrupts = <17 2>; + interrupts = <23 2>; }; }; diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt new file mode 100644 index 000000000000..600846557763 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt @@ -0,0 +1,24 @@ +* Freescale Enhanced Secure Digital Host Controller (eSDHC) + +The Enhanced Secure Digital Host Controller provides an interface +for MMC, SD, and SDIO types of memory cards. + +Required properties: + - compatible : should be + "fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors. + "fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors. + - reg : should contain eSDHC registers location and length. + - interrupts : should contain eSDHC interrupt. + - interrupt-parent : interrupt source phandle. + - clock-frequency : specifies eSDHC base clock frequency. + +Example: + +sdhci@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; +}; diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt index a2d963998a65..5ff76c9c57d2 100644 --- a/Documentation/powerpc/dts-bindings/fsl/ssi.txt +++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt @@ -4,44 +4,56 @@ The SSI is a serial device that communicates with audio codecs. It can be programmed in AC97, I2S, left-justified, or right-justified modes. Required properties: -- compatible : compatible list, containing "fsl,ssi" -- cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on -- reg : offset and length of the register set for the device -- interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and - level information for the interrupt. This should be - encoded based on the information in section 2) - depending on the type of interrupt controller you - have. -- interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. -- fsl,mode : the operating mode for the SSI interface - "i2s-slave" - I2S mode, SSI is clock slave - "i2s-master" - I2S mode, SSI is clock master - "lj-slave" - left-justified mode, SSI is clock slave - "lj-master" - l.j. mode, SSI is clock master - "rj-slave" - right-justified mode, SSI is clock slave - "rj-master" - r.j., SSI is clock master - "ac97-slave" - AC97 mode, SSI is clock slave - "ac97-master" - AC97 mode, SSI is clock master -- fsl,playback-dma: phandle to a node for the DMA channel to use for +- compatible: Compatible list, contains "fsl,ssi". +- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on. +- reg: Offset and length of the register set for the device. +- interrupts: <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and + level information for the interrupt. This should be + encoded based on the information in section 2) + depending on the type of interrupt controller you + have. +- interrupt-parent: The phandle for the interrupt controller that + services interrupts for this device. +- fsl,mode: The operating mode for the SSI interface. + "i2s-slave" - I2S mode, SSI is clock slave + "i2s-master" - I2S mode, SSI is clock master + "lj-slave" - left-justified mode, SSI is clock slave + "lj-master" - l.j. mode, SSI is clock master + "rj-slave" - right-justified mode, SSI is clock slave + "rj-master" - r.j., SSI is clock master + "ac97-slave" - AC97 mode, SSI is clock slave + "ac97-master" - AC97 mode, SSI is clock master +- fsl,playback-dma: Phandle to a node for the DMA channel to use for playback of audio. This is typically dictated by SOC design. See the notes below. -- fsl,capture-dma: phandle to a node for the DMA channel to use for +- fsl,capture-dma: Phandle to a node for the DMA channel to use for capture (recording) of audio. This is typically dictated by SOC design. See the notes below. +- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs. + This number is the maximum allowed value for SFCSR[TFWM0]. +- fsl,ssi-asynchronous: + If specified, the SSI is to be programmed in asynchronous + mode. In this mode, pins SRCK, STCK, SRFS, and STFS must + all be connected to valid signals. In synchronous mode, + SRCK and SRFS are ignored. Asynchronous mode allows + playback and capture to use different sample sizes and + sample rates. Some drivers may require that SRCK and STCK + be connected together, and SRFS and STFS be connected + together. This would still allow different sample sizes, + but not different sample rates. Optional properties: -- codec-handle : phandle to a 'codec' node that defines an audio - codec connected to this SSI. This node is typically - a child of an I2C or other control node. +- codec-handle: Phandle to a 'codec' node that defines an audio + codec connected to this SSI. This node is typically + a child of an I2C or other control node. Child 'codec' node required properties: -- compatible : compatible list, contains the name of the codec +- compatible: Compatible list, contains the name of the codec Child 'codec' node optional properties: -- clock-frequency : The frequency of the input clock, which typically - comes from an on-board dedicated oscillator. +- clock-frequency: The frequency of the input clock, which typically comes + from an on-board dedicated oscillator. Notes on fsl,playback-dma and fsl,capture-dma: diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv index 0d93fa1ac25e..f11c583295e9 100644 --- a/Documentation/video4linux/CARDLIST.bttv +++ b/Documentation/video4linux/CARDLIST.bttv @@ -135,7 +135,7 @@ 134 -> Adlink RTV24 135 -> DViCO FusionHDTV 5 Lite [18ac:d500] 136 -> Acorp Y878F [9511:1540] -137 -> Conceptronic CTVFMi v2 +137 -> Conceptronic CTVFMi v2 [036e:109e] 138 -> Prolink Pixelview PV-BT878P+ (Rev.2E) 139 -> Prolink PixelView PlayTV MPEG2 PV-M4900 140 -> Osprey 440 [0070:ff07] @@ -154,3 +154,7 @@ 153 -> PHYTEC VD-012 (bt878) 154 -> PHYTEC VD-012-X1 (bt878) 155 -> PHYTEC VD-012-X2 (bt878) +156 -> IVCE-8784 [0000:f050,0001:f050,0002:f050,0003:f050] +157 -> Geovision GV-800(S) (master) [800a:763d] +158 -> Geovision GV-800(S) (slave) [800b:763d,800c:763d,800d:763d] +159 -> ProVideo PV183 [1830:1540,1831:1540,1832:1540,1833:1540,1834:1540,1835:1540,1836:1540,1837:1540] diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 35ea130e9898..91aa3c0f0dd2 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -12,3 +12,7 @@ 11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78] 12 -> Leadtek Winfast PxDVR3200 H [107d:6681] 13 -> Compro VideoMate E650F [185b:e800] + 14 -> TurboSight TBS 6920 [6920:8888] + 15 -> TeVii S470 [d470:9022] + 16 -> DVBWorld DVB-S2 2005 [0001:2005] + 17 -> NetUP Dual DVB-S2 CI [1b55:2a2c] diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 0d08f1edcf6d..71e9db0b26f7 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -77,3 +77,4 @@ 76 -> SATTRADE ST4200 DVB-S/S2 [b200:4200] 77 -> TBS 8910 DVB-S [8910:8888] 78 -> Prof 6200 DVB-S [b022:3022] + 79 -> Terratec Cinergy HT PCI MKII [153b:1177] diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 75bded8a4aa2..78d0a6eed571 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -7,12 +7,12 @@ 6 -> Terratec Cinergy 200 USB (em2800) 7 -> Leadtek Winfast USB II (em2800) [0413:6023] 8 -> Kworld USB2800 (em2800) - 9 -> Pinnacle Dazzle DVC 90/DVC 100 (em2820/em2840) [2304:0207,2304:021a] + 9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,2304:0207,2304:021a] 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500] 11 -> Terratec Hybrid XS (em2880) [0ccd:0042] 12 -> Kworld PVR TV 2800 RF (em2820/em2840) 13 -> Terratec Prodigy XS (em2880) [0ccd:0047] - 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) + 14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) 15 -> V-Gear PocketTV (em2800) 16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b] 17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227] @@ -30,7 +30,6 @@ 30 -> Videology 20K14XUSB USB2.0 (em2820/em2840) 31 -> Usbgear VD204v9 (em2821) 32 -> Supercomp USB 2.0 TV (em2821) - 33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0 (em2821) 34 -> Terratec Cinergy A Hybrid XS (em2860) [0ccd:004f] 35 -> Typhoon DVD Maker (em2860) 36 -> NetGMBH Cam (em2860) @@ -58,3 +57,7 @@ 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] 60 -> Hauppauge WinTV HVR 850 (em2883) [2040:651f] 61 -> Pixelview PlayTV Box 4 USB 2.0 (em2820/em2840) + 62 -> Gadmei TVR200 (em2820/em2840) + 63 -> Kaiomy TVnPC U2 (em2860) [eb1a:e303] + 64 -> Easy Cap Capture DC-60 (em2860) + 65 -> IO-DATA GV-MVP/SZ (em2820/em2840) [04bb:0515] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index b8d470596b0c..6dacf2825259 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -153,3 +153,5 @@ 152 -> Asus Tiger Rev:1.00 [1043:4857] 153 -> Kworld Plus TV Analog Lite PCI [17de:7128] 154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d] +155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708] +156 -> Hauppauge WinTV-HVR1110r3 [0070:6707,0070:6709,0070:670a] diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran index 295462b2317a..0e89e7676298 100644 --- a/Documentation/video4linux/Zoran +++ b/Documentation/video4linux/Zoran @@ -401,8 +401,7 @@ Additional notes for software developers: first set the correct norm. Well, it seems logically correct: TV standard is "more constant" for current country than geometry settings of a variety of TV capture cards which may work in ITU or - square pixel format. Remember that users now can lock the norm to - avoid any ambiguity. + square pixel format. -- Please note that lavplay/lavrec are also included in the MJPEG-tools (http://mjpeg.sf.net/). diff --git a/Documentation/video4linux/bttv/Insmod-options b/Documentation/video4linux/bttv/Insmod-options index 5ef75787f83a..bbe3ed667d91 100644 --- a/Documentation/video4linux/bttv/Insmod-options +++ b/Documentation/video4linux/bttv/Insmod-options @@ -81,16 +81,6 @@ tuner.o pal=[bdgil] select PAL variant (used for some tuners only, important for the audio carrier). -tvmixer.o - registers a mixer device for the TV card's volume/bass/treble - controls (requires a i2c audio control chip like the msp3400). - - insmod args: - debug=1 print some debug info to the syslog. - devnr=n allocate device #n (0 == /dev/mixer, - 1 = /dev/mixer1, ...), default is to - use the first free one. - tvaudio.o new, experimental module which is supported to provide a single driver for all simple i2c audio control chips (tda/tea*). diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README index 7ca2154c2bf5..3a367cdb664e 100644 --- a/Documentation/video4linux/bttv/README +++ b/Documentation/video4linux/bttv/README @@ -63,8 +63,8 @@ If you have some knowledge and spare time, please try to fix this yourself (patches very welcome of course...) You know: The linux slogan is "Do it yourself". -There is a mailing list: video4linux-list@redhat.com. -https://listman.redhat.com/mailman/listinfo/video4linux-list +There is a mailing list: linux-media@vger.kernel.org +http://vger.kernel.org/vger-lists.html#linux-media If you have trouble with some specific TV card, try to ask there instead of mailing me directly. The chance that someone with the diff --git a/Documentation/video4linux/cx2341x/README.hm12 b/Documentation/video4linux/cx2341x/README.hm12 index 0e213ed095e6..b36148ea0750 100644 --- a/Documentation/video4linux/cx2341x/README.hm12 +++ b/Documentation/video4linux/cx2341x/README.hm12 @@ -32,6 +32,10 @@ Y, U and V planes. This code assumes frames of 720x576 (PAL) pixels. The width of a frame is always 720 pixels, regardless of the actual specified width. +If the height is not a multiple of 32 lines, then the captured video is +missing macroblocks at the end and is unusable. So the height must be a +multiple of 32. + -------------------------------------------------------------------------- #include <stdio.h> diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 1c58a7630146..98529e03a46e 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -32,6 +32,7 @@ spca561 041e:403b Creative Webcam Vista (VF0010) zc3xx 041e:4051 Creative Live!Cam Notebook Pro (VF0250) ov519 041e:4052 Creative Live! VISTA IM zc3xx 041e:4053 Creative Live!Cam Video IM +vc032x 041e:405b Creative Live! Cam Notebook Ultra (VC0130) ov519 041e:405f Creative Live! VISTA VF0330 ov519 041e:4060 Creative Live! VISTA VF0350 ov519 041e:4061 Creative Live! VISTA VF0400 @@ -193,6 +194,7 @@ spca500 084d:0003 D-Link DSC-350 spca500 08ca:0103 Aiptek PocketDV sunplus 08ca:0104 Aiptek PocketDVII 1.3 sunplus 08ca:0106 Aiptek Pocket DV3100+ +mr97310a 08ca:0111 Aiptek PenCam VGA+ sunplus 08ca:2008 Aiptek Mini PenCam 2 M sunplus 08ca:2010 Aiptek PocketCam 3M sunplus 08ca:2016 Aiptek PocketCam 2 Mega @@ -215,6 +217,7 @@ pac207 093a:2468 PAC207 pac207 093a:2470 Genius GF112 pac207 093a:2471 Genius VideoCam ge111 pac207 093a:2472 Genius VideoCam ge110 +pac207 093a:2474 Genius iLook 111 pac207 093a:2476 Genius e-Messenger 112 pac7311 093a:2600 PAC7311 Typhoon pac7311 093a:2601 Philips SPC 610 NC @@ -279,6 +282,7 @@ spca561 10fd:7e50 FlyCam Usb 100 zc3xx 10fd:8050 Typhoon Webshot II USB 300k ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201) pac207 145f:013a Trust WB-1300N +vc032x 15b8:6001 HP 2.0 Megapixel vc032x 15b8:6002 HP 2.0 Megapixel rz406aa spca501 1776:501c Arowana 300K CMOS Camera t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops diff --git a/Documentation/video4linux/si470x.txt b/Documentation/video4linux/si470x.txt index 49679e6aaa76..3a7823e01b4d 100644 --- a/Documentation/video4linux/si470x.txt +++ b/Documentation/video4linux/si470x.txt @@ -1,6 +1,6 @@ Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers -Copyright (c) 2008 Tobias Lorenz <tobias.lorenz@gmx.net> +Copyright (c) 2009 Tobias Lorenz <tobias.lorenz@gmx.net> Information from Silicon Labs @@ -41,7 +41,7 @@ chips are known to work: - 10c4:818a: Silicon Labs USB FM Radio Reference Design - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700) -- 10c5:819a: DealExtreme USB Radio +- 10c5:819a: Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) Software @@ -52,6 +52,7 @@ Testing is usually done with most application under Debian/testing: - gradio - GTK FM radio tuner - kradio - Comfortable Radio Application for KDE - radio - ncurses-based radio application +- mplayer - The Ultimate Movie Player For Linux There is also a library libv4l, which can be used. It's going to have a function for frequency seeking, either by using hardware functionality as in radio-si470x @@ -69,7 +70,7 @@ Audio Listing USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to also select SND_USB_AUDIO, as this is required to get sound from the radio. For listing you have to redirect the sound, for example using one of the following -commands. +commands. Please adjust the audio devices to your needs (/dev/dsp* and hw:x,x). If you just want to test audio (very poor quality): cat /dev/dsp1 > /dev/dsp @@ -80,6 +81,10 @@ sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp If you use arts try: arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B - +If you use mplayer try: +mplayer -radio adevice=hw=1.0:arate=96000 \ + -rawaudio rate=96000 \ + radio://<frequency>/capture Module Parameters ================= diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index ff124374e9ba..a31177390e55 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -47,7 +47,9 @@ All drivers have the following structure: 3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX, /dev/radioX and /dev/vtxX) and keeping track of device-node specific data. -4) Filehandle-specific structs containing per-filehandle data. +4) Filehandle-specific structs containing per-filehandle data; + +5) video buffer handling. This is a rough schematic of how it all relates: @@ -82,12 +84,20 @@ You must register the device instance: v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev); Registration will initialize the v4l2_device struct and link dev->driver_data -to v4l2_dev. Registration will also set v4l2_dev->name to a value derived from -dev (driver name followed by the bus_id, to be precise). You may change the -name after registration if you want. +to v4l2_dev. If v4l2_dev->name is empty then it will be set to a value derived +from dev (driver name followed by the bus_id, to be precise). If you set it +up before calling v4l2_device_register then it will be untouched. If dev is +NULL, then you *must* setup v4l2_dev->name before calling v4l2_device_register. The first 'dev' argument is normally the struct device pointer of a pci_dev, -usb_device or platform_device. +usb_device or platform_device. It is rare for dev to be NULL, but it happens +with ISA devices or when one device creates multiple PCI devices, thus making +it impossible to associate v4l2_dev with a particular parent. + +You can also supply a notify() callback that can be called by sub-devices to +notify you of events. Whether you need to set this depends on the sub-device. +Any notifications a sub-device supports must be defined in a header in +include/media/<subdevice>.h. You unregister with: @@ -95,6 +105,17 @@ You unregister with: Unregistering will also automatically unregister all subdevs from the device. +If you have a hotpluggable device (e.g. a USB device), then when a disconnect +happens the parent device becomes invalid. Since v4l2_device has a pointer to +that parent device it has to be cleared as well to mark that the parent is +gone. To do this call: + + v4l2_device_disconnect(struct v4l2_device *v4l2_dev); + +This does *not* unregister the subdevs, so you still need to call the +v4l2_device_unregister() function for that. If your driver is not hotpluggable, +then there is no need to call v4l2_device_disconnect(). + Sometimes you need to iterate over all devices registered by a specific driver. This is usually the case if multiple device drivers use the same hardware. E.g. the ivtvfb driver is a framebuffer driver that uses the ivtv @@ -134,7 +155,7 @@ The recommended approach is as follows: static atomic_t drv_instance = ATOMIC_INIT(0); -static int __devinit drv_probe(struct pci_dev *dev, +static int __devinit drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) { ... @@ -218,7 +239,7 @@ to add new ops and categories. A sub-device driver initializes the v4l2_subdev struct using: - v4l2_subdev_init(subdev, &ops); + v4l2_subdev_init(sd, &ops); Afterwards you need to initialize subdev->name with a unique name and set the module owner. This is done for you if you use the i2c helper functions. @@ -226,7 +247,7 @@ module owner. This is done for you if you use the i2c helper functions. A device (bridge) driver needs to register the v4l2_subdev with the v4l2_device: - int err = v4l2_device_register_subdev(device, subdev); + int err = v4l2_device_register_subdev(v4l2_dev, sd); This can fail if the subdev module disappeared before it could be registered. After this function was called successfully the subdev->dev field points to @@ -234,17 +255,17 @@ the v4l2_device. You can unregister a sub-device using: - v4l2_device_unregister_subdev(subdev); + v4l2_device_unregister_subdev(sd); -Afterwards the subdev module can be unloaded and subdev->dev == NULL. +Afterwards the subdev module can be unloaded and sd->dev == NULL. You can call an ops function either directly: - err = subdev->ops->core->g_chip_ident(subdev, &chip); + err = sd->ops->core->g_chip_ident(sd, &chip); but it is better and easier to use this macro: - err = v4l2_subdev_call(subdev, core, g_chip_ident, &chip); + err = v4l2_subdev_call(sd, core, g_chip_ident, &chip); The macro will to the right NULL pointer checks and returns -ENODEV if subdev is NULL, -ENOIOCTLCMD if either subdev->core or subdev->core->g_chip_ident is @@ -252,19 +273,19 @@ NULL, or the actual result of the subdev->ops->core->g_chip_ident ops. It is also possible to call all or a subset of the sub-devices: - v4l2_device_call_all(dev, 0, core, g_chip_ident, &chip); + v4l2_device_call_all(v4l2_dev, 0, core, g_chip_ident, &chip); Any subdev that does not support this ops is skipped and error results are ignored. If you want to check for errors use this: - err = v4l2_device_call_until_err(dev, 0, core, g_chip_ident, &chip); + err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip); Any error except -ENOIOCTLCMD will exit the loop with that error. If no errors (except -ENOIOCTLCMD) occured, then 0 is returned. The second argument to both calls is a group ID. If 0, then all subdevs are called. If non-zero, then only those whose group ID match that value will -be called. Before a bridge driver registers a subdev it can set subdev->grp_id +be called. Before a bridge driver registers a subdev it can set sd->grp_id to whatever value it wants (it's 0 by default). This value is owned by the bridge driver and the sub-device driver will never modify or use it. @@ -276,6 +297,11 @@ e.g. AUDIO_CONTROLLER and specify that as the group ID value when calling v4l2_device_call_all(). That ensures that it will only go to the subdev that needs it. +If the sub-device needs to notify its v4l2_device parent of an event, then +it can call v4l2_subdev_notify(sd, notification, arg). This macro checks +whether there is a notify() callback defined and returns -ENODEV if not. +Otherwise the result of the notify() call is returned. + The advantage of using v4l2_subdev is that it is a generic struct and does not contain any knowledge about the underlying hardware. So a driver might contain several subdevs that use an I2C bus, but also a subdev that is @@ -340,6 +366,12 @@ Make sure to call v4l2_device_unregister_subdev(sd) when the remove() callback is called. This will unregister the sub-device from the bridge driver. It is safe to call this even if the sub-device was never registered. +You need to do this because when the bridge driver destroys the i2c adapter +the remove() callbacks are called of the i2c devices on that adapter. +After that the corresponding v4l2_subdev structures are invalid, so they +have to be unregistered first. Calling v4l2_device_unregister_subdev(sd) +from the remove() callback ensures that this is always done correctly. + The bridge driver also has some helper functions it can use: @@ -349,8 +381,8 @@ This loads the given module (can be NULL if no module needs to be loaded) and calls i2c_new_device() with the given i2c_adapter and chip/address arguments. If all goes well, then it registers the subdev with the v4l2_device. It gets the v4l2_device by calling i2c_get_adapdata(adapter), so you should make sure -that adapdata is set to v4l2_device when you setup the i2c_adapter in your -driver. +to call i2c_set_adapdata(adapter, v4l2_device) when you setup the i2c_adapter +in your driver. You can also use v4l2_i2c_new_probed_subdev() which is very similar to v4l2_i2c_new_subdev(), except that it has an array of possible I2C addresses @@ -358,6 +390,14 @@ that it should probe. Internally it calls i2c_new_probed_device(). Both functions return NULL if something went wrong. +Note that the chipid you pass to v4l2_i2c_new_(probed_)subdev() is usually +the same as the module name. It allows you to specify a chip variant, e.g. +"saa7114" or "saa7115". In general though the i2c driver autodetects this. +The use of chipid is something that needs to be looked at more closely at a +later date. It differs between i2c drivers and as such can be confusing. +To see which chip variants are supported you can look in the i2c driver code +for the i2c_device_id table. This lists all the possibilities. + struct video_device ------------------- @@ -396,6 +436,15 @@ You should also set these fields: - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance (highly recommended to use this and it might become compulsory in the future!), then set this to your v4l2_ioctl_ops struct. +- parent: you only set this if v4l2_device was registered with NULL as + the parent device struct. This only happens in cases where one hardware + device has multiple PCI devices that all share the same v4l2_device core. + + The cx88 driver is an example of this: one core v4l2_device struct, but + it is used by both an raw video PCI device (cx8800) and a MPEG PCI device + (cx8802). Since the v4l2_device cannot be associated with a particular + PCI device it is setup without a parent device. But when the struct + video_device is setup you do know which parent PCI device to use. If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or .ioctl to video_ioctl2 in your v4l2_file_operations struct. @@ -499,8 +548,8 @@ There are a few useful helper functions: You can set/get driver private data in the video_device struct using: -void *video_get_drvdata(struct video_device *dev); -void video_set_drvdata(struct video_device *dev, void *data); +void *video_get_drvdata(struct video_device *vdev); +void video_set_drvdata(struct video_device *vdev, void *data); Note that you can safely call video_set_drvdata() before calling video_register_device(). @@ -519,3 +568,103 @@ void *video_drvdata(struct file *file); You can go from a video_device struct to the v4l2_device struct using: struct v4l2_device *v4l2_dev = vdev->v4l2_dev; + +video buffer helper functions +----------------------------- + +The v4l2 core API provides a standard method for dealing with video +buffers. Those methods allow a driver to implement read(), mmap() and +overlay() on a consistent way. + +There are currently methods for using video buffers on devices that +supports DMA with scatter/gather method (videobuf-dma-sg), DMA with +linear access (videobuf-dma-contig), and vmalloced buffers, mostly +used on USB drivers (videobuf-vmalloc). + +Any driver using videobuf should provide operations (callbacks) for +four handlers: + +ops->buf_setup - calculates the size of the video buffers and avoid they + to waste more than some maximum limit of RAM; +ops->buf_prepare - fills the video buffer structs and calls + videobuf_iolock() to alloc and prepare mmaped memory; +ops->buf_queue - advices the driver that another buffer were + requested (by read() or by QBUF); +ops->buf_release - frees any buffer that were allocated. + +In order to use it, the driver need to have a code (generally called at +interrupt context) that will properly handle the buffer request lists, +announcing that a new buffer were filled. + +The irq handling code should handle the videobuf task lists, in order +to advice videobuf that a new frame were filled, in order to honor to a +request. The code is generally like this one: + if (list_empty(&dma_q->active)) + return; + + buf = list_entry(dma_q->active.next, struct vbuffer, vb.queue); + + if (!waitqueue_active(&buf->vb.done)) + return; + + /* Some logic to handle the buf may be needed here */ + + list_del(&buf->vb.queue); + do_gettimeofday(&buf->vb.ts); + wake_up(&buf->vb.done); + +Those are the videobuffer functions used on drivers, implemented on +videobuf-core: + +- Videobuf init functions + videobuf_queue_sg_init() + Initializes the videobuf infrastructure. This function should be + called before any other videobuf function on drivers that uses DMA + Scatter/Gather buffers. + + videobuf_queue_dma_contig_init + Initializes the videobuf infrastructure. This function should be + called before any other videobuf function on drivers that need DMA + contiguous buffers. + + videobuf_queue_vmalloc_init() + Initializes the videobuf infrastructure. This function should be + called before any other videobuf function on USB (and other drivers) + that need a vmalloced type of videobuf. + +- videobuf_iolock() + Prepares the videobuf memory for the proper method (read, mmap, overlay). + +- videobuf_queue_is_busy() + Checks if a videobuf is streaming. + +- videobuf_queue_cancel() + Stops video handling. + +- videobuf_mmap_free() + frees mmap buffers. + +- videobuf_stop() + Stops video handling, ends mmap and frees mmap and other buffers. + +- V4L2 api functions. Those functions correspond to VIDIOC_foo ioctls: + videobuf_reqbufs(), videobuf_querybuf(), videobuf_qbuf(), + videobuf_dqbuf(), videobuf_streamon(), videobuf_streamoff(). + +- V4L1 api function (corresponds to VIDIOCMBUF ioctl): + videobuf_cgmbuf() + This function is used to provide backward compatibility with V4L1 + API. + +- Some help functions for read()/poll() operations: + videobuf_read_stream() + For continuous stream read() + videobuf_read_one() + For snapshot read() + videobuf_poll_stream() + polling help function + +The better way to understand it is to take a look at vivi driver. One +of the main reasons for vivi is to be a videobuf usage example. the +vivi_thread_tick() does the task that the IRQ callback would do on PCI +drivers (or the irq callback on USB). diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c index d6e70bef8ad0..05769cff1009 100644 --- a/Documentation/video4linux/v4lgrab.c +++ b/Documentation/video4linux/v4lgrab.c @@ -105,8 +105,8 @@ int main(int argc, char ** argv) struct video_picture vpic; unsigned char *buffer, *src; - int bpp = 24, r, g, b; - unsigned int i, src_depth; + int bpp = 24, r = 0, g = 0, b = 0; + unsigned int i, src_depth = 16; if (fd < 0) { perror(VIDEO_DEV); diff --git a/Documentation/video4linux/zr364xx.txt b/Documentation/video4linux/zr364xx.txt index 5c81e3ae6458..7f3d1955d214 100644 --- a/Documentation/video4linux/zr364xx.txt +++ b/Documentation/video4linux/zr364xx.txt @@ -65,3 +65,4 @@ Vendor Product Distributor Model 0x06d6 0x003b Trust Powerc@m 970Z 0x0a17 0x004e Pentax Optio 50 0x041e 0x405d Creative DiVi CAM 516 +0x08ca 0x2102 Aiptek DV T300 diff --git a/Documentation/x86/earlyprintk.txt b/Documentation/x86/earlyprintk.txt new file mode 100644 index 000000000000..607b1a016064 --- /dev/null +++ b/Documentation/x86/earlyprintk.txt @@ -0,0 +1,101 @@ + +Mini-HOWTO for using the earlyprintk=dbgp boot option with a +USB2 Debug port key and a debug cable, on x86 systems. + +You need two computers, the 'USB debug key' special gadget and +and two USB cables, connected like this: + + [host/target] <-------> [USB debug key] <-------> [client/console] + +1. There are three specific hardware requirements: + + a.) Host/target system needs to have USB debug port capability. + + You can check this capability by looking at a 'Debug port' bit in + the lspci -vvv output: + + # lspci -vvv + ... + 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI]) + Subsystem: Lenovo ThinkPad T61 + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0 + Interrupt: pin D routed to IRQ 19 + Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K] + Capabilities: [50] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME+ + Capabilities: [58] Debug port: BAR=1 offset=00a0 + ^^^^^^^^^^^ <==================== [ HERE ] + Kernel driver in use: ehci_hcd + Kernel modules: ehci-hcd + ... + +( If your system does not list a debug port capability then you probably + wont be able to use the USB debug key. ) + + b.) You also need a Netchip USB debug cable/key: + + http://www.plxtech.com/products/NET2000/NET20DC/default.asp + + This is a small blue plastic connector with two USB connections, + it draws power from its USB connections. + + c.) Thirdly, you need a second client/console system with a regular USB port. + +2. Software requirements: + + a.) On the host/target system: + + You need to enable the following kernel config option: + + CONFIG_EARLY_PRINTK_DBGP=y + + And you need to add the boot command line: "earlyprintk=dbgp". + (If you are using Grub, append it to the 'kernel' line in + /etc/grub.conf) + + NOTE: normally earlyprintk console gets turned off once the + regular console is alive - use "earlyprintk=dbgp,keep" to keep + this channel open beyond early bootup. This can be useful for + debugging crashes under Xorg, etc. + + b.) On the client/console system: + + You should enable the following kernel config option: + + CONFIG_USB_SERIAL_DEBUG=y + + On the next bootup with the modified kernel you should + get a /dev/ttyUSBx device(s). + + Now this channel of kernel messages is ready to be used: start + your favorite terminal emulator (minicom, etc.) and set + it up to use /dev/ttyUSB0 - or use a raw 'cat /dev/ttyUSBx' to + see the raw output. + + c.) On Nvidia Southbridge based systems: the kernel will try to probe + and find out which port has debug device connected. + +3. Testing that it works fine: + + You can test the output by using earlyprintk=dbgp,keep and provoking + kernel messages on the host/target system. You can provoke a harmless + kernel message by for example doing: + + echo h > /proc/sysrq-trigger + + On the host/target system you should see this help line in "dmesg" output: + + SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z) + + On the client/console system do: + + cat /dev/ttyUSB0 + + And you should see the help line above displayed shortly after you've + provoked it on the host system. + +If it does not work then please ask about it on the linux-kernel@vger.kernel.org +mailing list or contact the x86 maintainers. |