diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/SubmitChecklist | 6 | ||||
| -rw-r--r-- | Documentation/gpio.txt | 4 | ||||
| -rw-r--r-- | Documentation/kref.txt | 2 | ||||
| -rw-r--r-- | Documentation/mips/pci/pci.README | 54 | ||||
| -rw-r--r-- | Documentation/video4linux/CARDLIST.saa7134 | 5 | ||||
| -rw-r--r-- | Documentation/video4linux/sn9c102.txt | 18 |
6 files changed, 21 insertions, 68 deletions
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist index 6491b2c45dd4..3af3e65cf43b 100644 --- a/Documentation/SubmitChecklist +++ b/Documentation/SubmitChecklist @@ -73,9 +73,9 @@ kernel patches. If the new code is substantial, addition of subsystem-specific fault injection might be appropriate. -22: Newly-added code has been compiled with `gcc -W'. This will generate - lots of noise, but is good for finding bugs like "warning: comparison - between signed and unsigned". +22: Newly-added code has been compiled with `gcc -W' (use "make + EXTRA_CFLAGS=-W"). This will generate lots of noise, but is good for + finding bugs like "warning: comparison between signed and unsigned". 23: Tested after it has been merged into the -mm patchset to make sure that it still works with all of the other queued patches and various diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index f8528db967fa..e8be0abb346c 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -66,7 +66,9 @@ registers; another might implement it by delegating through abstractions used for several very different kinds of GPIO controller. That said, if the convention is supported on their platform, drivers should -use it when possible: +use it when possible. Platforms should declare GENERIC_GPIO support in +Kconfig (boolean true), which multi-platform drivers can depend on when +using the include file: #include <asm/gpio.h> diff --git a/Documentation/kref.txt b/Documentation/kref.txt index 42fe28445916..f38b59d00c63 100644 --- a/Documentation/kref.txt +++ b/Documentation/kref.txt @@ -67,7 +67,7 @@ void more_data_handling(void *cb_data) . . do stuff with data here . - kref_put(data, data_release); + kref_put(&data->refcount, data_release); } int my_data_handler(void) diff --git a/Documentation/mips/pci/pci.README b/Documentation/mips/pci/pci.README deleted file mode 100644 index 8697ee41372d..000000000000 --- a/Documentation/mips/pci/pci.README +++ /dev/null @@ -1,54 +0,0 @@ - -Pete Popov, ppopov@pacbell.net -07/11/2001 - -This README briefly explains how to use the pci and pci_auto -code in arch/mips/kernel. The code was ported from PowerPC and -modified slightly. It has been tested pretty well on PPC on some -rather complex systems with multiple bridges and devices behind -each bridge. However, at the time this README was written, the -mips port was tested only on boards with a single pci bus and -no P2P bridges. It's very possible that on boards with P2P -bridges some modifications have to be made. The code will -evolve, no doubt, but currently every single mips board -is doing its own pcibios thing and it has become a big -mess. This generic pci code is meant to clean up the mips -pci mess and make it easier to add pci support to new boards. - -inside the define for your board in arch/mips/config.in. -For example, the Galileo EV96100 board looks like this: - -if [ "$CONFIG_MIPS_EV96100" = "y" ]; then - define_bool CONFIG_PCI y - define_bool CONFIG_MIPS_GT96100 y - define_bool CONFIG_NEW_PCI y - define_bool CONFIG_SWAP_IO_SPACE y -fi - - -Next, if you want to use the arch/mips/kernel/pci code, which has the -pcibios_init() function, add - -define_bool CONFIG_NEW_PCI y - -inside the define for your board. Again, the EV96100 example above -show NEW_PCI turned on. - - -Now you need to add your files to hook in your pci configuration -cycles. Usually you'll need only a couple of files named something -like pci_fixups.c and pci_ops.c. You can copy the templates -provided and fill in the code. - -The file pci_ops.c should contain the pci configuration cycles routines. -It also has the mips_pci_channels[] array which contains the descriptors -of each pci controller. - -The file pci_fixups.c contains a few routines to do interrupt fixups, -resources fixups, and, if needed, pci bios fixups. - -Usually you'll put your pci_fixups.c file in your board specific directory, -since the functions in that file are board specific. The functions in -pci_ops.c, on the other hand, are usually pci controller specific so that -file could be shared among a few different boards using the same -pci controller. diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index d7bb2e2e4d9b..712e8c8333cc 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -52,7 +52,7 @@ 51 -> ProVideo PV952 [1540:9524] 52 -> AverMedia AverTV/305 [1461:2108] 53 -> ASUS TV-FM 7135 [1043:4845] - 54 -> LifeView FlyTV Platinum FM / Gold [5168:0214,1489:0214,5168:0304] + 54 -> LifeView FlyTV Platinum FM / Gold [5168:0214,5168:5214,1489:0214,5168:0304] 55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere Duo [5168:0306,4E42:0306] 56 -> Avermedia AVerTV 307 [1461:a70a] 57 -> Avermedia AVerTV GO 007 FM [1461:f31f] @@ -111,3 +111,6 @@ 110 -> Avermedia M102 [1461:f31e] 111 -> ASUS P7131 4871 [1043:4871] 112 -> ASUSTeK P7131 Hybrid [1043:4876] +113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) [1019:4cb6] +114 -> KWorld DVB-T 210 [17de:7250] +115 -> Sabrent PCMCIA TV-PCB05 [0919:2003] diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt index 5fe0ad7dfc20..279717c96f63 100644 --- a/Documentation/video4linux/sn9c102.txt +++ b/Documentation/video4linux/sn9c102.txt @@ -355,6 +355,9 @@ devices assembling the SN9C1xx PC camera controllers: Vendor ID Product ID --------- ---------- +0x0458 0x7025 +0x045e 0x00f5 +0x045e 0x00f7 0x0471 0x0327 0x0471 0x0328 0x0c45 0x6001 @@ -432,7 +435,7 @@ Image sensor / SN9C1xx bridge | SN9C10[12] SN9C103 SN9C105 SN9C120 HV7131D Hynix Semiconductor | Yes No No No HV7131R Hynix Semiconductor | No Yes Yes Yes MI-0343 Micron Technology | Yes No No No -MI-0360 Micron Technology | No Yes No No +MI-0360 Micron Technology | No Yes Yes Yes OV7630 OmniVision Technologies | Yes Yes No No OV7660 OmniVision Technologies | No No Yes Yes PAS106B PixArt Imaging | Yes No No No @@ -478,13 +481,12 @@ scaling factor is restored to 1. This driver supports two different video formats: the first one is the "8-bit Sequential Bayer" format and can be used to obtain uncompressed video data from the device through the current I/O method, while the second one provides -"raw" compressed video data (without frame headers not related to the -compressed data). The compression quality may vary from 0 to 1 and can be -selected or queried thanks to the VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP V4L2 -ioctl's. For maximum flexibility, both the default active video format and the -default compression quality depend on how the image sensor being used is -initialized (as described in the documentation of the API for the image sensors -supplied by this driver). +either "raw" compressed video data (without frame headers not related to the +compressed data) or standard JPEG (with frame headers). The compression quality +may vary from 0 to 1 and can be selected or queried thanks to the +VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP V4L2 ioctl's. For maximum flexibility, +both the default active video format and the default compression quality +depend on how the image sensor being used is initialized. 11. Video frame formats [1] |