diff options
Diffstat (limited to 'Documentation/media/uapi/v4l')
19 files changed, 638 insertions, 54 deletions
diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst index 1cedcfc04327..386d6cf83e9c 100644 --- a/Documentation/media/uapi/v4l/biblio.rst +++ b/Documentation/media/uapi/v4l/biblio.rst @@ -226,16 +226,6 @@ xvYCC :author: International Electrotechnical Commission (http://www.iec.ch) -.. _adobergb: - -AdobeRGB -======== - - -:title: Adobe© RGB (1998) Color Image Encoding Version 2005-05 - -:author: Adobe Systems Incorporated (http://www.adobe.com) - .. _oprgb: opRGB diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst index e2c85ddc990b..2e266d32470a 100644 --- a/Documentation/media/uapi/v4l/buffer.rst +++ b/Documentation/media/uapi/v4l/buffer.rst @@ -306,10 +306,23 @@ struct v4l2_buffer - A place holder for future extensions. Drivers and applications must set this to 0. * - __u32 - - ``reserved`` + - ``request_fd`` - - - A place holder for future extensions. Drivers and applications - must set this to 0. + - The file descriptor of the request to queue the buffer to. If the flag + ``V4L2_BUF_FLAG_REQUEST_FD`` is set, then the buffer will be + queued to this request. If the flag is not set, then this field will + be ignored. + + The ``V4L2_BUF_FLAG_REQUEST_FD`` flag and this field are only used by + :ref:`ioctl VIDIOC_QBUF <VIDIOC_QBUF>` and ignored by other ioctls that + take a :c:type:`v4l2_buffer` as argument. + + Applications should not set ``V4L2_BUF_FLAG_REQUEST_FD`` for any ioctls + other than :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`. + + If the device does not support requests, then ``EACCES`` will be returned. + If requests are supported but an invalid request file descriptor is + given, then ``EINVAL`` will be returned. @@ -514,6 +527,11 @@ Buffer Flags streaming may continue as normal and the buffer may be reused normally. Drivers set this flag when the ``VIDIOC_DQBUF`` ioctl is called. + * .. _`V4L2-BUF-FLAG-IN-REQUEST`: + + - ``V4L2_BUF_FLAG_IN_REQUEST`` + - 0x00000080 + - This buffer is part of a request that hasn't been queued yet. * .. _`V4L2-BUF-FLAG-KEYFRAME`: - ``V4L2_BUF_FLAG_KEYFRAME`` @@ -589,6 +607,11 @@ Buffer Flags the format. Any Any subsequent call to the :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will not block anymore, but return an ``EPIPE`` error code. + * .. _`V4L2-BUF-FLAG-REQUEST-FD`: + + - ``V4L2_BUF_FLAG_REQUEST_FD`` + - 0x00800000 + - The ``request_fd`` field contains a valid file descriptor. * .. _`V4L2-BUF-FLAG-TIMESTAMP-MASK`: - ``V4L2_BUF_FLAG_TIMESTAMP_MASK`` diff --git a/Documentation/media/uapi/v4l/colorspaces-defs.rst b/Documentation/media/uapi/v4l/colorspaces-defs.rst index 410907fe9415..f24615544792 100644 --- a/Documentation/media/uapi/v4l/colorspaces-defs.rst +++ b/Documentation/media/uapi/v4l/colorspaces-defs.rst @@ -51,8 +51,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum - See :ref:`col-rec709`. * - ``V4L2_COLORSPACE_SRGB`` - See :ref:`col-srgb`. - * - ``V4L2_COLORSPACE_ADOBERGB`` - - See :ref:`col-adobergb`. + * - ``V4L2_COLORSPACE_OPRGB`` + - See :ref:`col-oprgb`. * - ``V4L2_COLORSPACE_BT2020`` - See :ref:`col-bt2020`. * - ``V4L2_COLORSPACE_DCI_P3`` @@ -90,8 +90,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum - Use the Rec. 709 transfer function. * - ``V4L2_XFER_FUNC_SRGB`` - Use the sRGB transfer function. - * - ``V4L2_XFER_FUNC_ADOBERGB`` - - Use the AdobeRGB transfer function. + * - ``V4L2_XFER_FUNC_OPRGB`` + - Use the opRGB transfer function. * - ``V4L2_XFER_FUNC_SMPTE240M`` - Use the SMPTE 240M transfer function. * - ``V4L2_XFER_FUNC_NONE`` diff --git a/Documentation/media/uapi/v4l/colorspaces-details.rst b/Documentation/media/uapi/v4l/colorspaces-details.rst index b5d551b9cc8f..09fabf4cd412 100644 --- a/Documentation/media/uapi/v4l/colorspaces-details.rst +++ b/Documentation/media/uapi/v4l/colorspaces-details.rst @@ -290,15 +290,14 @@ Y' is clamped to the range [0…1] and Cb and Cr are clamped to the range 170M/BT.601. The Y'CbCr quantization is limited range. -.. _col-adobergb: +.. _col-oprgb: -Colorspace Adobe RGB (V4L2_COLORSPACE_ADOBERGB) +Colorspace opRGB (V4L2_COLORSPACE_OPRGB) =============================================== -The :ref:`adobergb` standard defines the colorspace used by computer -graphics that use the AdobeRGB colorspace. This is also known as the -:ref:`oprgb` standard. The default transfer function is -``V4L2_XFER_FUNC_ADOBERGB``. The default Y'CbCr encoding is +The :ref:`oprgb` standard defines the colorspace used by computer +graphics that use the opRGB colorspace. The default transfer function is +``V4L2_XFER_FUNC_OPRGB``. The default Y'CbCr encoding is ``V4L2_YCBCR_ENC_601``. The default Y'CbCr quantization is limited range. @@ -312,7 +311,7 @@ The chromaticities of the primary colors and the white reference are: .. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}| -.. flat-table:: Adobe RGB Chromaticities +.. flat-table:: opRGB Chromaticities :header-rows: 1 :stub-columns: 0 :widths: 1 1 2 diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst index 9f7312bf3365..65a1d873196b 100644 --- a/Documentation/media/uapi/v4l/extended-controls.rst +++ b/Documentation/media/uapi/v4l/extended-controls.rst @@ -1497,6 +1497,182 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - +.. _v4l2-mpeg-mpeg2: + +``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS (struct)`` + Specifies the slice parameters (as extracted from the bitstream) for the + associated MPEG-2 slice data. This includes the necessary parameters for + configuring a stateless hardware decoding pipeline for MPEG-2. + The bitstream parameters are defined according to :ref:`mpeg2part2`. + +.. c:type:: v4l2_ctrl_mpeg2_slice_params + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_mpeg2_slice_params + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``bit_size`` + - Size (in bits) of the current slice data. + * - __u32 + - ``data_bit_offset`` + - Offset (in bits) to the video data in the current slice data. + * - struct :c:type:`v4l2_mpeg2_sequence` + - ``sequence`` + - Structure with MPEG-2 sequence metadata, merging relevant fields from + the sequence header and sequence extension parts of the bitstream. + * - struct :c:type:`v4l2_mpeg2_picture` + - ``picture`` + - Structure with MPEG-2 picture metadata, merging relevant fields from + the picture header and picture coding extension parts of the bitstream. + * - __u8 + - ``quantiser_scale_code`` + - Code used to determine the quantization scale to use for the IDCT. + * - __u8 + - ``backward_ref_index`` + - Index for the V4L2 buffer to use as backward reference, used with + B-coded and P-coded frames. + * - __u8 + - ``forward_ref_index`` + - Index for the V4L2 buffer to use as forward reference, used with + B-coded frames. + +.. c:type:: v4l2_mpeg2_sequence + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_mpeg2_sequence + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u16 + - ``horizontal_size`` + - The width of the displayable part of the frame's luminance component. + * - __u16 + - ``vertical_size`` + - The height of the displayable part of the frame's luminance component. + * - __u32 + - ``vbv_buffer_size`` + - Used to calculate the required size of the video buffering verifier, + defined (in bits) as: 16 * 1024 * vbv_buffer_size. + * - __u8 + - ``profile_and_level_indication`` + - The current profile and level indication as extracted from the + bitstream. + * - __u8 + - ``progressive_sequence`` + - Indication that all the frames for the sequence are progressive instead + of interlaced. + * - __u8 + - ``chroma_format`` + - The chrominance sub-sampling format (1: 4:2:0, 2: 4:2:2, 3: 4:4:4). + +.. c:type:: v4l2_mpeg2_picture + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_mpeg2_picture + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``picture_coding_type`` + - Picture coding type for the frame covered by the current slice + (V4L2_MPEG2_PICTURE_CODING_TYPE_I, V4L2_MPEG2_PICTURE_CODING_TYPE_P or + V4L2_MPEG2_PICTURE_CODING_TYPE_B). + * - __u8 + - ``f_code[2][2]`` + - Motion vector codes. + * - __u8 + - ``intra_dc_precision`` + - Precision of Discrete Cosine transform (0: 8 bits precision, + 1: 9 bits precision, 2: 10 bits precision, 3: 11 bits precision). + * - __u8 + - ``picture_structure`` + - Picture structure (1: interlaced top field, 2: interlaced bottom field, + 3: progressive frame). + * - __u8 + - ``top_field_first`` + - If set to 1 and interlaced stream, top field is output first. + * - __u8 + - ``frame_pred_frame_dct`` + - If set to 1, only frame-DCT and frame prediction are used. + * - __u8 + - ``concealment_motion_vectors`` + - If set to 1, motion vectors are coded for intra macroblocks. + * - __u8 + - ``q_scale_type`` + - This flag affects the inverse quantization process. + * - __u8 + - ``intra_vlc_format`` + - This flag affects the decoding of transform coefficient data. + * - __u8 + - ``alternate_scan`` + - This flag affects the decoding of transform coefficient data. + * - __u8 + - ``repeat_first_field`` + - This flag affects the decoding process of progressive frames. + * - __u8 + - ``progressive_frame`` + - Indicates whether the current frame is progressive. + +``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION (struct)`` + Specifies quantization matrices (as extracted from the bitstream) for the + associated MPEG-2 slice data. + +.. c:type:: v4l2_ctrl_mpeg2_quantization + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_mpeg2_quantization + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``load_intra_quantiser_matrix`` + - One bit to indicate whether to load the ``intra_quantiser_matrix`` data. + * - __u8 + - ``load_non_intra_quantiser_matrix`` + - One bit to indicate whether to load the ``non_intra_quantiser_matrix`` + data. + * - __u8 + - ``load_chroma_intra_quantiser_matrix`` + - One bit to indicate whether to load the + ``chroma_intra_quantiser_matrix`` data, only relevant for non-4:2:0 YUV + formats. + * - __u8 + - ``load_chroma_non_intra_quantiser_matrix`` + - One bit to indicate whether to load the + ``chroma_non_intra_quantiser_matrix`` data, only relevant for non-4:2:0 + YUV formats. + * - __u8 + - ``intra_quantiser_matrix[64]`` + - The quantization matrix coefficients for intra-coded frames, in zigzag + scanning order. It is relevant for both luma and chroma components, + although it can be superseded by the chroma-specific matrix for + non-4:2:0 YUV formats. + * - __u8 + - ``non_intra_quantiser_matrix[64]`` + - The quantization matrix coefficients for non-intra-coded frames, in + zigzag scanning order. It is relevant for both luma and chroma + components, although it can be superseded by the chroma-specific matrix + for non-4:2:0 YUV formats. + * - __u8 + - ``chroma_intra_quantiser_matrix[64]`` + - The quantization matrix coefficients for the chominance component of + intra-coded frames, in zigzag scanning order. Only relevant for + non-4:2:0 YUV formats. + * - __u8 + - ``chroma_non_intra_quantiser_matrix[64]`` + - The quantization matrix coefficients for the chrominance component of + non-intra-coded frames, in zigzag scanning order. Only relevant for + non-4:2:0 YUV formats. MFC 5.1 MPEG Controls --------------------- diff --git a/Documentation/media/uapi/v4l/func-poll.rst b/Documentation/media/uapi/v4l/func-poll.rst index 360bc6523ae2..967fe8920729 100644 --- a/Documentation/media/uapi/v4l/func-poll.rst +++ b/Documentation/media/uapi/v4l/func-poll.rst @@ -113,4 +113,5 @@ EINTR The call was interrupted by a signal. EINVAL - The ``nfds`` argument is greater than ``OPEN_MAX``. + The ``nfds`` value exceeds the ``RLIMIT_NOFILE`` value. Use + ``getrlimit()`` to obtain this value. diff --git a/Documentation/media/uapi/v4l/meta-formats.rst b/Documentation/media/uapi/v4l/meta-formats.rst index 0c4e1ecf5879..cf971d5ad9ea 100644 --- a/Documentation/media/uapi/v4l/meta-formats.rst +++ b/Documentation/media/uapi/v4l/meta-formats.rst @@ -12,6 +12,7 @@ These formats are used for the :ref:`metadata` interface only. .. toctree:: :maxdepth: 1 + pixfmt-meta-d4xx pixfmt-meta-uvc pixfmt-meta-vsp1-hgo pixfmt-meta-vsp1-hgt diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst index d382e7a5c38e..ba0f6c49d9bf 100644 --- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst +++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst @@ -60,6 +60,22 @@ Compressed Formats - ``V4L2_PIX_FMT_MPEG2`` - 'MPG2' - MPEG2 video elementary stream. + * .. _V4L2-PIX-FMT-MPEG2-SLICE: + + - ``V4L2_PIX_FMT_MPEG2_SLICE`` + - 'MG2S' + - MPEG-2 parsed slice data, as extracted from the MPEG-2 bitstream. + This format is adapted for stateless video decoders that implement a + MPEG-2 pipeline (using the :ref:`codec` and :ref:`media-request-api`). + Metadata associated with the frame to decode is required to be passed + through the ``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS`` control and + quantization matrices can optionally be specified through the + ``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION`` control. + See the :ref:`associated Codec Control IDs <v4l2-mpeg-mpeg2>`. + Exactly one output and one capture buffer must be provided for use with + this pixel format. The output buffer must contain the appropriate number + of macroblocks to decode a full corresponding frame to the matching + capture buffer. * .. _V4L2-PIX-FMT-MPEG4: - ``V4L2_PIX_FMT_MPEG4`` @@ -101,4 +117,4 @@ Compressed Formats - 'FWHT' - Video elementary stream using a codec based on the Fast Walsh Hadamard Transform. This codec is implemented by the vicodec ('Virtual Codec') - driver. See the vicodec-codec.h header for more details. + driver. See the codec-fwht.h header for more details. diff --git a/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst b/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst new file mode 100644 index 000000000000..63bf1a2c9116 --- /dev/null +++ b/Documentation/media/uapi/v4l/pixfmt-meta-d4xx.rst @@ -0,0 +1,210 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _v4l2-meta-fmt-d4xx: + +******************************* +V4L2_META_FMT_D4XX ('D4XX') +******************************* + +Intel D4xx UVC Cameras Metadata + + +Description +=========== + +Intel D4xx (D435 and other) cameras include per-frame metadata in their UVC +payload headers, following the Microsoft(R) UVC extension proposal [1_]. That +means, that the private D4XX metadata, following the standard UVC header, is +organised in blocks. D4XX cameras implement several standard block types, +proposed by Microsoft, and several proprietary ones. Supported standard metadata +types are MetadataId_CaptureStats (ID 3), MetadataId_CameraExtrinsics (ID 4), +and MetadataId_CameraIntrinsics (ID 5). For their description see [1_]. This +document describes proprietary metadata types, used by D4xx cameras. + +V4L2_META_FMT_D4XX buffers follow the metadata buffer layout of +V4L2_META_FMT_UVC with the only difference, that it also includes proprietary +payload header data. D4xx cameras use bulk transfers and only send one payload +per frame, therefore their headers cannot be larger than 255 bytes. + +Below are proprietary Microsoft style metadata types, used by D4xx cameras, +where all fields are in little endian order: + +.. flat-table:: D4xx metadata + :widths: 1 4 + :header-rows: 1 + :stub-columns: 0 + + * - Field + - Description + * - :cspan:`1` *Depth Control* + * - __u32 ID + - 0x80000000 + * - __u32 Size + - Size in bytes (currently 56) + * - __u32 Version + - Version of this structure. The documentation herein corresponds to + version xxx. The version number will be incremented when new fields are + added. + * - __u32 Flags + - A bitmask of flags: see [2_] below + * - __u32 Gain + - Gain value in internal units, same as the V4L2_CID_GAIN control, used to + capture the frame + * - __u32 Exposure + - Exposure time (in microseconds) used to capture the frame + * - __u32 Laser power + - Power of the laser LED 0-360, used for depth measurement + * - __u32 AE mode + - 0: manual; 1: automatic exposure + * - __u32 Exposure priority + - Exposure priority value: 0 - constant frame rate + * - __u32 AE ROI left + - Left border of the AE Region of Interest (all ROI values are in pixels + and lie between 0 and maximum width or height respectively) + * - __u32 AE ROI right + - Right border of the AE Region of Interest + * - __u32 AE ROI top + - Top border of the AE Region of Interest + * - __u32 AE ROI bottom + - Bottom border of the AE Region of Interest + * - __u32 Preset + - Preset selector value, default: 0, unless changed by the user + * - __u32 Laser mode + - 0: off, 1: on + * - :cspan:`1` *Capture Timing* + * - __u32 ID + - 0x80000001 + * - __u32 Size + - Size in bytes (currently 40) + * - __u32 Version + - Version of this structure. The documentation herein corresponds to + version xxx. The version number will be incremented when new fields are + added. + * - __u32 Flags + - A bitmask of flags: see [3_] below + * - __u32 Frame counter + - Monotonically increasing counter + * - __u32 Optical time + - Time in microseconds from the beginning of a frame till its middle + * - __u32 Readout time + - Time, used to read out a frame in microseconds + * - __u32 Exposure time + - Frame exposure time in microseconds + * - __u32 Frame interval + - In microseconds = 1000000 / framerate + * - __u32 Pipe latency + - Time in microseconds from start of frame to data in USB buffer + * - :cspan:`1` *Configuration* + * - __u32 ID + - 0x80000002 + * - __u32 Size + - Size in bytes (currently 40) + * - __u32 Version + - Version of this structure. The documentation herein corresponds to + version xxx. The version number will be incremented when new fields are + added. + * - __u32 Flags + - A bitmask of flags: see [4_] below + * - __u8 Hardware type + - Camera hardware version [5_] + * - __u8 SKU ID + - Camera hardware configuration [6_] + * - __u32 Cookie + - Internal synchronisation + * - __u16 Format + - Image format code [7_] + * - __u16 Width + - Width in pixels + * - __u16 Height + - Height in pixels + * - __u16 Framerate + - Requested frame rate per second + * - __u16 Trigger + - Byte 0: bit 0: depth and RGB are synchronised, bit 1: external trigger + +.. _1: + +[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/stream/uvc-extensions-1-5 + +.. _2: + +[2] Depth Control flags specify which fields are valid: :: + + 0x00000001 Gain + 0x00000002 Exposure + 0x00000004 Laser power + 0x00000008 AE mode + 0x00000010 Exposure priority + 0x00000020 AE ROI + 0x00000040 Preset + +.. _3: + +[3] Capture Timing flags specify which fields are valid: :: + + 0x00000001 Frame counter + 0x00000002 Optical time + 0x00000004 Readout time + 0x00000008 Exposure time + 0x00000010 Frame interval + 0x00000020 Pipe latency + +.. _4: + +[4] Configuration flags specify which fields are valid: :: + + 0x00000001 Hardware type + 0x00000002 SKU ID + 0x00000004 Cookie + 0x00000008 Format + 0x00000010 Width + 0x00000020 Height + 0x00000040 Framerate + 0x00000080 Trigger + 0x00000100 Cal count + +.. _5: + +[5] Camera model: :: + + 0 DS5 + 1 IVCAM2 + +.. _6: + +[6] 8-bit camera hardware configuration bitfield: :: + + [1:0] depthCamera + 00: no depth + 01: standard depth + 10: wide depth + 11: reserved + [2] depthIsActive - has a laser projector + [3] RGB presence + [4] Inertial Measurement Unit (IMU) presence + [5] projectorType + 0: HPTG + 1: Princeton + [6] 0: a projector, 1: an LED + [7] reserved + +.. _7: + +[7] Image format codes per video streaming interface: + +Depth: :: + + 1 Z16 + 2 Z + +Left sensor: :: + + 1 Y8 + 2 UYVY + 3 R8L8 + 4 Calibration + 5 W10 + +Fish Eye sensor: :: + + 1 RAW8 diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst index 38af1472a4b4..0c399858bda2 100644 --- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst +++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst @@ -243,7 +243,20 @@ please make a proposal on the linux-media mailing list. It is an opaque intermediate format and the MDP hardware must be used to convert ``V4L2_PIX_FMT_MT21C`` to ``V4L2_PIX_FMT_NV12M``, ``V4L2_PIX_FMT_YUV420M`` or ``V4L2_PIX_FMT_YVU420``. - + * .. _V4L2-PIX-FMT-SUNXI-TILED-NV12: + + - ``V4L2_PIX_FMT_SUNXI_TILED_NV12`` + - 'ST12' + - Two-planar NV12-based format used by the video engine found on Allwinner + (codenamed sunxi) platforms, with 32x32 tiles for the luminance plane + and 32x64 tiles for the chrominance plane. The data in each tile is + stored in linear order, within the tile bounds. Each tile follows the + previous one linearly in memory (from left to right, top to bottom). + + The associated buffer dimensions are aligned to match an integer number + of tiles, resulting in 32-aligned resolutions for the luminance plane + and 16-aligned resolutions for the chrominance plane (with 2x2 + subsampling). .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| diff --git a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst index a39e18d69511..eadf6f757fbf 100644 --- a/Documentation/media/uapi/v4l/vidioc-create-bufs.rst +++ b/Documentation/media/uapi/v4l/vidioc-create-bufs.rst @@ -102,7 +102,19 @@ than the number requested. - ``format`` - Filled in by the application, preserved by the driver. * - __u32 - - ``reserved``\ [8] + - ``capabilities`` + - Set by the driver. If 0, then the driver doesn't support + capabilities. In that case all you know is that the driver is + guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support + other :c:type:`v4l2_memory` types. It will not support any others + capabilities. See :ref:`here <v4l2-buf-capabilities>` for a list of the + capabilities. + + If you want to just query the capabilities without making any + other changes, then set ``count`` to 0, ``memory`` to + ``V4L2_MEMORY_MMAP`` and ``format.type`` to the buffer type. + * - __u32 + - ``reserved``\ [7] - A place holder for future extensions. Drivers and applications must set the array to zero. diff --git a/Documentation/media/uapi/v4l/vidioc-cropcap.rst b/Documentation/media/uapi/v4l/vidioc-cropcap.rst index a65dbec6b20b..0a7b8287fd38 100644 --- a/Documentation/media/uapi/v4l/vidioc-cropcap.rst +++ b/Documentation/media/uapi/v4l/vidioc-cropcap.rst @@ -58,7 +58,7 @@ overlay devices. - Type of the data stream, set by the application. Only these types are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``, ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE`` and - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note above. + ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note below. * - struct :ref:`v4l2_rect <v4l2-rect-crop>` - ``bounds`` - Defines the window within capturing or output is possible, this diff --git a/Documentation/media/uapi/v4l/vidioc-dqevent.rst b/Documentation/media/uapi/v4l/vidioc-dqevent.rst index cb3565f36793..04416b6943c0 100644 --- a/Documentation/media/uapi/v4l/vidioc-dqevent.rst +++ b/Documentation/media/uapi/v4l/vidioc-dqevent.rst @@ -379,7 +379,17 @@ call. - 0x0001 - This event gets triggered when a resolution change is detected at an input. This can come from an input connector or from a video - decoder. + decoder. Applications will have to query the new resolution (if + any, the signal may also have been lost). + + *Important*: even if the new video timings appear identical to the old + ones, receiving this event indicates that there was an issue with the + video signal and you must stop and restart streaming + (:ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` + followed by :ref:`VIDIOC_STREAMON <VIDIOC_STREAMON>`). The reason is + that many devices are not able to recover from a temporary loss of + signal and so restarting streaming I/O is required in order for the + hardware to synchronize to the video signal. Return Value diff --git a/Documentation/media/uapi/v4l/vidioc-g-crop.rst b/Documentation/media/uapi/v4l/vidioc-g-crop.rst index a6ed43ba9ca3..b95ba6743cbd 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-crop.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-crop.rst @@ -84,7 +84,7 @@ When cropping is not supported then no parameters are changed and - Type of the data stream, set by the application. Only these types are valid here: ``V4L2_BUF_TYPE_VIDEO_CAPTURE``, ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT``, ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE`` and - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note above. + ``V4L2_BUF_TYPE_VIDEO_OVERLAY``. See :c:type:`v4l2_buf_type` and the note below. * - struct :c:type:`v4l2_rect` - ``c`` - Cropping rectangle. The same co-ordinate system as for struct diff --git a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst index 1a034e825161..35cba2c8d459 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-dv-timings.rst @@ -257,14 +257,19 @@ EBUSY will also be cleared. This is a read-only flag, applications must not set this. * - ``V4L2_DV_FL_REDUCED_FPS`` - - CEA-861 specific: only valid for video transmitters, the flag is - cleared by receivers. It is also only valid for formats with the - ``V4L2_DV_FL_CAN_REDUCE_FPS`` flag set, for other formats the - flag will be cleared by the driver. If the application sets this - flag, then the pixelclock used to set up the transmitter is - divided by 1.001 to make it compatible with NTSC framerates. If - the transmitter can't generate such frequencies, then the flag - will also be cleared. + - CEA-861 specific: only valid for video transmitters or video + receivers that have the ``V4L2_DV_FL_CAN_DETECT_REDUCED_FPS`` + set. This flag is cleared otherwise. It is also only valid for + formats with the ``V4L2_DV_FL_CAN_REDUCE_FPS`` flag set, for other + formats the flag will be cleared by the driver. + + If the application sets this flag for a transmitter, then the + pixelclock used to set up the transmitter is divided by 1.001 to + make it compatible with NTSC framerates. If the transmitter can't + generate such frequencies, then the flag will be cleared. + + If a video receiver detects that the format uses a reduced framerate, + then it will set this flag to signal this to the application. * - ``V4L2_DV_FL_HALF_LINE`` - Specific to interlaced formats: if set, then the vertical backporch of field 1 (aka the odd field) is really one half-line @@ -294,3 +299,9 @@ EBUSY - If set, then the hdmi_vic field is valid and contains the Video Identification Code as per the HDMI standard (HDMI Vendor Specific InfoFrame). + * - ``V4L2_DV_FL_CAN_DETECT_REDUCED_FPS`` + - CEA-861 specific: only valid for video receivers, the flag is + cleared by transmitters. + If set, then the hardware can detect the difference between + regular framerates and framerates reduced by 1000/1001. E.g.: + 60 vs 59.94 Hz, 30 vs 29.97 Hz or 24 vs 23.976 Hz. diff --git a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst index 2011c2b2ee67..d9930fe776cf 100644 --- a/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst +++ b/Documentation/media/uapi/v4l/vidioc-g-ext-ctrls.rst @@ -95,6 +95,25 @@ appropriate. In the first case the new value is set in struct is inappropriate (e.g. the given menu index is not supported by the menu control), then this will also result in an ``EINVAL`` error code error. +If ``request_fd`` is set to a not-yet-queued :ref:`request <media-request-api>` +file descriptor and ``which`` is set to ``V4L2_CTRL_WHICH_REQUEST_VAL``, +then the controls are not applied immediately when calling +:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, but instead are applied by +the driver for the buffer associated with the same request. +If the device does not support requests, then ``EACCES`` will be returned. +If requests are supported but an invalid request file descriptor is given, +then ``EINVAL`` will be returned. + +An attempt to call :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` for a +request that has already been queued will result in an ``EBUSY`` error. + +If ``request_fd`` is specified and ``which`` is set to +``V4L2_CTRL_WHICH_REQUEST_VAL`` during a call to +:ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`, then it will return the +values of the controls at the time of request completion. +If the request is not yet completed, then this will result in an +``EACCES`` error. + The driver will only set/get these controls if all control values are correct. This prevents the situation where only some of the controls were set/get. Only low-level errors (e. g. a failed i2c command) can @@ -209,13 +228,17 @@ still cause this situation. - ``which`` - Which value of the control to get/set/try. ``V4L2_CTRL_WHICH_CUR_VAL`` will return the current value of the - control and ``V4L2_CTRL_WHICH_DEF_VAL`` will return the default - value of the control. + control, ``V4L2_CTRL_WHICH_DEF_VAL`` will return the default + value of the control and ``V4L2_CTRL_WHICH_REQUEST_VAL`` indicates that + these controls have to be retrieved from a request or tried/set for + a request. In the latter case the ``request_fd`` field contains the + file descriptor of the request that should be used. If the device + does not support requests, then ``EACCES`` will be returned. .. note:: - You can only get the default value of the control, - you cannot set or try it. + When using ``V4L2_CTRL_WHICH_DEF_VAL`` be aware that you can only + get the default value of the control, you cannot set or try it. For backwards compatibility you can also use a control class here (see :ref:`ctrl-class`). In that case all controls have to @@ -272,8 +295,15 @@ still cause this situation. then you can call :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` to try to discover the actual control that failed the validation step. Unfortunately, there is no ``TRY`` equivalent for :ref:`VIDIOC_G_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>`. + * - __s32 + - ``request_fd`` + - File descriptor of the request to be used by this operation. Only + valid if ``which`` is set to ``V4L2_CTRL_WHICH_REQUEST_VAL``. + If the device does not support requests, then ``EACCES`` will be returned. + If requests are supported but an invalid request file descriptor is + given, then ``EINVAL`` will be returned. * - __u32 - - ``reserved``\ [2] + - ``reserved``\ [1] - Reserved for future extensions. Drivers and applications must set the array to zero. @@ -347,11 +377,14 @@ appropriately. The generic error codes are described at the EINVAL The struct :c:type:`v4l2_ext_control` ``id`` is - invalid, the struct :c:type:`v4l2_ext_controls` + invalid, or the struct :c:type:`v4l2_ext_controls` ``which`` is invalid, or the struct :c:type:`v4l2_ext_control` ``value`` was inappropriate (e.g. the given menu index is not supported by the - driver). This error code is also returned by the + driver), or the ``which`` field was set to ``V4L2_CTRL_WHICH_REQUEST_VAL`` + but the given ``request_fd`` was invalid or ``V4L2_CTRL_WHICH_REQUEST_VAL`` + is not supported by the kernel. + This error code is also returned by the :ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` and :ref:`VIDIOC_TRY_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` ioctls if two or more control values are in conflict. @@ -362,7 +395,9 @@ ERANGE EBUSY The control is temporarily not changeable, possibly because another applications took over control of the device function this control - belongs to. + belongs to, or (if the ``which`` field was set to + ``V4L2_CTRL_WHICH_REQUEST_VAL``) the request was queued but not yet + completed. ENOSPC The space reserved for the control's payload is insufficient. The @@ -370,5 +405,9 @@ ENOSPC and this error code is returned. EACCES - Attempt to try or set a read-only control or to get a write-only - control. + Attempt to try or set a read-only control, or to get a write-only + control, or to get a control from a request that has not yet been + completed. + + Or the ``which`` field was set to ``V4L2_CTRL_WHICH_REQUEST_VAL`` but the + device does not support requests. diff --git a/Documentation/media/uapi/v4l/vidioc-qbuf.rst b/Documentation/media/uapi/v4l/vidioc-qbuf.rst index 9e448a4aa3aa..753b3b5946b1 100644 --- a/Documentation/media/uapi/v4l/vidioc-qbuf.rst +++ b/Documentation/media/uapi/v4l/vidioc-qbuf.rst @@ -65,7 +65,7 @@ To enqueue a :ref:`memory mapped <mmap>` buffer applications set the with a pointer to this structure the driver sets the ``V4L2_BUF_FLAG_MAPPED`` and ``V4L2_BUF_FLAG_QUEUED`` flags and clears the ``V4L2_BUF_FLAG_DONE`` flag in the ``flags`` field, or it returns an -EINVAL error code. +``EINVAL`` error code. To enqueue a :ref:`user pointer <userp>` buffer applications set the ``memory`` field to ``V4L2_MEMORY_USERPTR``, the ``m.userptr`` field to @@ -98,6 +98,28 @@ dequeued, until the :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` or :ref:`VIDIOC_REQBUFS` ioctl is called, or until the device is closed. +The ``request_fd`` field can be used with the ``VIDIOC_QBUF`` ioctl to specify +the file descriptor of a :ref:`request <media-request-api>`, if requests are +in use. Setting it means that the buffer will not be passed to the driver +until the request itself is queued. Also, the driver will apply any +settings associated with the request for this buffer. This field will +be ignored unless the ``V4L2_BUF_FLAG_REQUEST_FD`` flag is set. +If the device does not support requests, then ``EACCES`` will be returned. +If requests are supported but an invalid request file descriptor is given, +then ``EINVAL`` will be returned. + +.. caution:: + It is not allowed to mix queuing requests with queuing buffers directly. + ``EBUSY`` will be returned if the first buffer was queued directly and + then the application tries to queue a request, or vice versa. After + closing the file descriptor, calling + :ref:`VIDIOC_STREAMOFF <VIDIOC_STREAMON>` or calling :ref:`VIDIOC_REQBUFS` + the check for this will be reset. + + For :ref:`memory-to-memory devices <codec>` you can specify the + ``request_fd`` only for output buffers, not for capture buffers. Attempting + to specify this for a capture buffer will result in an ``EACCES`` error. + Applications call the ``VIDIOC_DQBUF`` ioctl to dequeue a filled (capturing) or displayed (output) buffer from the driver's outgoing queue. They just set the ``type``, ``memory`` and ``reserved`` fields of @@ -133,7 +155,9 @@ EAGAIN EINVAL The buffer ``type`` is not supported, or the ``index`` is out of bounds, or no buffers have been allocated yet, or the ``userptr`` or - ``length`` are invalid. + ``length`` are invalid, or the ``V4L2_BUF_FLAG_REQUEST_FD`` flag was + set but the the given ``request_fd`` was invalid, or ``m.fd`` was + an invalid DMABUF file descriptor. EIO ``VIDIOC_DQBUF`` failed due to an internal error. Can also indicate @@ -153,3 +177,12 @@ EPIPE ``VIDIOC_DQBUF`` returns this on an empty capture queue for mem2mem codecs if a buffer with the ``V4L2_BUF_FLAG_LAST`` was already dequeued and no new buffers are expected to become available. + +EACCES + The ``V4L2_BUF_FLAG_REQUEST_FD`` flag was set but the device does not + support requests for the given buffer type. + +EBUSY + The first buffer was queued via a request, but the application now tries + to queue it directly, or vice versa (it is not permitted to mix the two + APIs). diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst index 5bd26e8c9a1a..258f5813f281 100644 --- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst +++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst @@ -424,8 +424,18 @@ See also the examples in :ref:`control`. - any - An unsigned 32-bit valued control ranging from minimum to maximum inclusive. The step value indicates the increment between values. - - + * - ``V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS`` + - n/a + - n/a + - n/a + - A struct :c:type:`v4l2_ctrl_mpeg2_slice_params`, containing MPEG-2 + slice parameters for stateless video decoders. + * - ``V4L2_CTRL_TYPE_MPEG2_QUANTIZATION`` + - n/a + - n/a + - n/a + - A struct :c:type:`v4l2_ctrl_mpeg2_quantization`, containing MPEG-2 + quantization matrices for stateless video decoders. .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| diff --git a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst index 316f52c8a310..d4bbbb0c60e8 100644 --- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst +++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst @@ -88,10 +88,50 @@ any DMA in progress, an implicit ``V4L2_MEMORY_DMABUF`` or ``V4L2_MEMORY_USERPTR``. See :c:type:`v4l2_memory`. * - __u32 - - ``reserved``\ [2] + - ``capabilities`` + - Set by the driver. If 0, then the driver doesn't support + capabilities. In that case all you know is that the driver is + guaranteed to support ``V4L2_MEMORY_MMAP`` and *might* support + other :c:type:`v4l2_memory` types. It will not support any others + capabilities. + + If you want to query the capabilities with a minimum of side-effects, + then this can be called with ``count`` set to 0, ``memory`` set to + ``V4L2_MEMORY_MMAP`` and ``type`` set to the buffer type. This will + free any previously allocated buffers, so this is typically something + that will be done at the start of the application. + * - __u32 + - ``reserved``\ [1] - A place holder for future extensions. Drivers and applications must set the array to zero. +.. tabularcolumns:: |p{6.1cm}|p{2.2cm}|p{8.7cm}| + +.. _v4l2-buf-capabilities: +.. _V4L2-BUF-CAP-SUPPORTS-MMAP: +.. _V4L2-BUF-CAP-SUPPORTS-USERPTR: +.. _V4L2-BUF-CAP-SUPPORTS-DMABUF: +.. _V4L2-BUF-CAP-SUPPORTS-REQUESTS: + +.. cssclass:: longtable + +.. flat-table:: V4L2 Buffer Capabilities Flags + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 + + * - ``V4L2_BUF_CAP_SUPPORTS_MMAP`` + - 0x00000001 + - This buffer type supports the ``V4L2_MEMORY_MMAP`` streaming mode. + * - ``V4L2_BUF_CAP_SUPPORTS_USERPTR`` + - 0x00000002 + - This buffer type supports the ``V4L2_MEMORY_USERPTR`` streaming mode. + * - ``V4L2_BUF_CAP_SUPPORTS_DMABUF`` + - 0x00000004 + - This buffer type supports the ``V4L2_MEMORY_DMABUF`` streaming mode. + * - ``V4L2_BUF_CAP_SUPPORTS_REQUESTS`` + - 0x00000008 + - This buffer type supports :ref:`requests <media-request-api>`. Return Value ============ |