diff options
Diffstat (limited to 'Documentation/devicetree')
10 files changed, 178 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt index c052caad36e8..104cc9b41df4 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -189,7 +189,11 @@ Power-Down (SRPD), among other things. Required properties: - compatible : should contain one of these + "brcm,brcmstb-memc-ddr-rev-b.2.1" "brcm,brcmstb-memc-ddr-rev-b.2.2" + "brcm,brcmstb-memc-ddr-rev-b.2.3" + "brcm,brcmstb-memc-ddr-rev-b.3.0" + "brcm,brcmstb-memc-ddr-rev-b.3.1" "brcm,brcmstb-memc-ddr" - reg : the MEMC DDR register range diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index c760ecb81381..663766685818 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -17,7 +17,6 @@ Required properties: - "marvell,armada-380-ahci" - "marvell,armada-3700-ahci" - "snps,dwc-ahci" - - "snps,exynos5440-ahci" - "snps,spear-ahci" - "generic-ahci" - interrupts : <interrupt mapping for SATA IRQ> diff --git a/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt new file mode 100644 index 000000000000..87dfb33fb3be --- /dev/null +++ b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt @@ -0,0 +1,37 @@ +Device tree bindings for Allwinner A64 DE2 bus + +The Allwinner A64 DE2 is on a special bus, which needs a SRAM region (SRAM C) +to be claimed for enabling the access. + +Required properties: + + - compatible: Should contain "allwinner,sun50i-a64-de2" + - reg: A resource specifier for the register space + - #address-cells: Must be set to 1 + - #size-cells: Must be set to 1 + - ranges: Must be set up to map the address space inside the + DE2, for the sub-blocks of DE2. + - allwinner,sram: the SRAM that needs to be claimed + +Example: + + de2@1000000 { + compatible = "allwinner,sun50i-a64-de2"; + reg = <0x1000000 0x400000>; + allwinner,sram = <&de2_sram 1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000000 0x400000>; + + display_clocks: clock@0 { + compatible = "allwinner,sun50i-a64-de2-clk"; + reg = <0x0 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt index d8ed5b780ed9..91dc2333af01 100644 --- a/Documentation/devicetree/bindings/bus/ti-sysc.txt +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -36,6 +36,7 @@ Required standard properties: "ti,sysc-omap-aes" "ti,sysc-mcasp" "ti,sysc-usb-host-fs" + "ti,sysc-dra7-mcan" - reg shall have register areas implemented for the interconnect target module in question such as revision, sysc and syss diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt deleted file mode 100644 index c7d227c31e95..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Samsung Exynos5440 Clock Controller - -The Exynos5440 clock controller generates and supplies clock to various -controllers within the Exynos5440 SoC. - -Required Properties: - -- compatible: should be "samsung,exynos5440-clock". - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos5440.h header and can be used in device -tree sources. - -Example: An example of a clock controller node is listed below. - - clock: clock-controller@10010000 { - compatible = "samsung,exynos5440-clock"; - reg = <0x160000 0x10000>; - #clock-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt deleted file mode 100644 index caff1a57436f..000000000000 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt +++ /dev/null @@ -1,28 +0,0 @@ - -Exynos5440 cpufreq driver -------------------- - -Exynos5440 SoC cpufreq driver for CPU frequency scaling. - -Required properties: -- interrupts: Interrupt to know the completion of cpu frequency change. -- operating-points: Table of frequencies and voltage CPU could be transitioned into, - in the decreasing order. Frequency should be in KHz units and voltage - should be in microvolts. - -Optional properties: -- clock-latency: Clock monitor latency in microsecond. - -All the required listed above must be defined under node cpufreq. - -Example: --------- - cpufreq@160000 { - compatible = "samsung,exynos5440-cpufreq"; - reg = <0x160000 0x1000>; - interrupts = <0 57 0>; - operating-points = < - 1000000 975000 - 800000 925000>; - clock-latency = <100000>; - }; diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt new file mode 100644 index 000000000000..510c748656ec --- /dev/null +++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt @@ -0,0 +1,52 @@ +Qualcomm AOSS Reset Controller +====================================== + +This binding describes a reset-controller found on AOSS-CC (always on subsystem) +for Qualcomm SDM845 SoCs. + +Required properties: +- compatible: + Usage: required + Value type: <string> + Definition: must be: + "qcom,sdm845-aoss-cc" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: must specify the base address and size of the register + space. + +- #reset-cells: + Usage: required + Value type: <uint> + Definition: must be 1; cell entry represents the reset index. + +Example: + +aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0xc2a0000 0x31000>; + #reset-cells = <1>; +}; + +Specifying reset lines connected to IP modules +============================================== + +Device nodes that need access to reset lines should +specify them as a reset phandle in their corresponding node as +specified in reset.txt. + +For list of all valid reset indicies see +<dt-bindings/reset/qcom,sdm845-aoss.h> + +Example: + +modem-pil@4080000 { + ... + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>; + reset-names = "mss_restart"; + + ... +}; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 93efed629900..101743dda223 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -118,3 +118,59 @@ Example: other nodes ... }; + + +USB3 core reset +--------------- + +USB3 core reset belongs to USB3 glue layer. Before using the core reset, +it is necessary to control the clocks and resets to enable this layer. +These clocks and resets should be described in each property. + +Required properties: +- compatible: Should be + "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC + "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC + "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC + "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC +- #reset-cells: Should be 1. +- reg: Specifies offset and length of the register set for the device. +- clocks: A list of phandles to the clock gate for USB3 glue layer. + According to the clock-names, appropriate clocks are required. +- clock-names: Should contain + "gio", "link" - for Pro4 SoC + "link" - for others +- resets: A list of phandles to the reset control for USB3 glue layer. + According to the reset-names, appropriate resets are required. +- reset-names: Should contain + "gio", "link" - for Pro4 SoC + "link" - for others + +Example: + + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_rst: reset@0 { + compatible = "socionext,uniphier-ld20-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + regulator { + ... + }; + + phy { + ... + }; + ... + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index bf80e3f96f8c..f9987c30f0d5 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -19,6 +19,7 @@ IP Pairing Required properties in pwrap device node. - compatible: "mediatek,mt2701-pwrap" for MT2701/7623 SoCs + "mediatek,mt6797-pwrap" for MT6797 SoCs "mediatek,mt7622-pwrap" for MT7622 SoCs "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt index d087f04a4d7f..c51ade86578c 100644 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -10,8 +10,14 @@ Controller Node Required properties: - compatible : should be: - - "allwinner,sun4i-a10-sram-controller" - - "allwinner,sun50i-a64-sram-controller" + - "allwinner,sun4i-a10-sram-controller" (deprecated) + - "allwinner,sun4i-a10-system-control" + - "allwinner,sun5i-a13-system-control" + - "allwinner,sun7i-a20-system-control", "allwinner,sun4i-a10-system-control" + - "allwinner,sun8i-a23-system-control" + - "allwinner,sun8i-h3-system-control" + - "allwinner,sun50i-a64-sram-controller" (deprecated) + - "allwinner,sun50i-a64-system-control" - reg : sram controller register offset + length SRAM nodes @@ -26,8 +32,25 @@ once again the representation described in the mmio-sram binding. The valid sections compatible for A10 are: - allwinner,sun4i-a10-sram-a3-a4 + - allwinner,sun4i-a10-sram-c1 - allwinner,sun4i-a10-sram-d +The valid sections compatible for A13 are: + - allwinner,sun5i-a13-sram-a3-a4, allwinner,sun4i-a10-sram-a3-a4 + - allwinner,sun5i-a13-sram-c1, allwinner,sun4i-a10-sram-c1 + - allwinner,sun5i-a13-sram-d, allwinner,sun4i-a10-sram-d + +The valid sections compatible for A20 are: + - allwinner,sun7i-a20-sram-a3-a4, allwinner,sun4i-a10-sram-a3-a4 + - allwinner,sun7i-a20-sram-c1, allwinner,sun4i-a10-sram-c1 + - allwinner,sun7i-a20-sram-d, allwinner,sun4i-a10-sram-d + +The valid sections compatible for A23/A33 are: + - allwinner,sun8i-a23-sram-c1, allwinner,sun4i-a10-sram-c1 + +The valid sections compatible for H3 are: + - allwinner,sun8i-h3-sram-c1, allwinner,sun4i-a10-sram-c1 + The valid sections compatible for A64 are: - allwinner,sun50i-a64-sram-c @@ -47,8 +70,8 @@ This valid values for this argument are: Example ------- -sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; +system-control@1c00000 { + compatible = "allwinner,sun4i-a10-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; |