diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi/sh-msiof.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/spi/sh-msiof.txt | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt deleted file mode 100644 index 18e14ee257b2..000000000000 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ /dev/null @@ -1,105 +0,0 @@ -Renesas MSIOF spi controller - -Required properties: -- compatible : "renesas,msiof-r8a7743" (RZ/G1M) - "renesas,msiof-r8a7744" (RZ/G1N) - "renesas,msiof-r8a7745" (RZ/G1E) - "renesas,msiof-r8a77470" (RZ/G1C) - "renesas,msiof-r8a774a1" (RZ/G2M) - "renesas,msiof-r8a774c0" (RZ/G2E) - "renesas,msiof-r8a7790" (R-Car H2) - "renesas,msiof-r8a7791" (R-Car M2-W) - "renesas,msiof-r8a7792" (R-Car V2H) - "renesas,msiof-r8a7793" (R-Car M2-N) - "renesas,msiof-r8a7794" (R-Car E2) - "renesas,msiof-r8a7795" (R-Car H3) - "renesas,msiof-r8a7796" (R-Car M3-W) - "renesas,msiof-r8a77965" (R-Car M3-N) - "renesas,msiof-r8a77970" (R-Car V3M) - "renesas,msiof-r8a77980" (R-Car V3H) - "renesas,msiof-r8a77990" (R-Car E3) - "renesas,msiof-r8a77995" (R-Car D3) - "renesas,msiof-sh73a0" (SH-Mobile AG5) - "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device) - "renesas,rcar-gen2-msiof" (generic R-Car Gen2 and RZ/G1 compatible device) - "renesas,rcar-gen3-msiof" (generic R-Car Gen3 and RZ/G2 compatible device) - "renesas,sh-msiof" (deprecated) - - When compatible with the generic version, nodes - must list the SoC-specific version corresponding - to the platform first followed by the generic - version. - -- reg : A list of offsets and lengths of the register sets for - the device. - If only one register set is present, it is to be used - by both the CPU and the DMA engine. - If two register sets are present, the first is to be - used by the CPU, and the second is to be used by the - DMA engine. -- interrupts : Interrupt specifier -- #address-cells : Must be <1> -- #size-cells : Must be <0> - -Optional properties: -- clocks : Must contain a reference to the functional clock. -- num-cs : Total number of chip selects (default is 1). - Up to 3 native chip selects are supported: - 0: MSIOF_SYNC - 1: MSIOF_SS1 - 2: MSIOF_SS2 - Hardware limitations related to chip selects: - - Native chip selects are always deasserted in - between transfers that are part of the same - message. Use cs-gpios to work around this. - - All slaves using native chip selects must use the - same spi-cs-high configuration. Use cs-gpios to - work around this. - - When using GPIO chip selects, at least one native - chip select must be left unused, as it will be - driven anyway. -- dmas : Must contain a list of two references to DMA - specifiers, one for transmission, and one for - reception. -- dma-names : Must contain a list of two DMA names, "tx" and "rx". -- spi-slave : Empty property indicating the SPI controller is used - in slave mode. -- renesas,dtdl : delay sync signal (setup) in transmit mode. - Must contain one of the following values: - 0 (no bit delay) - 50 (0.5-clock-cycle delay) - 100 (1-clock-cycle delay) - 150 (1.5-clock-cycle delay) - 200 (2-clock-cycle delay) - -- renesas,syncdl : delay sync signal (hold) in transmit mode. - Must contain one of the following values: - 0 (no bit delay) - 50 (0.5-clock-cycle delay) - 100 (1-clock-cycle delay) - 150 (1.5-clock-cycle delay) - 200 (2-clock-cycle delay) - 300 (3-clock-cycle delay) - -Optional properties, deprecated for soctype-specific bindings: -- renesas,tx-fifo-size : Overrides the default tx fifo size given in words - (default is 64) -- renesas,rx-fifo-size : Overrides the default rx fifo size given in words - (default is 64) - -Pinctrl properties might be needed, too. See -Documentation/devicetree/bindings/pinctrl/renesas,*. - -Example: - - msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7791", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e20000 0 0x0064>; - interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; - dmas = <&dmac0 0x51>, <&dmac0 0x52>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - }; |