diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy')
6 files changed, 87 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt new file mode 100644 index 000000000000..e8d82286beb9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt @@ -0,0 +1,41 @@ +Broadcom Stingray PCIe PHY + +Required properties: +- compatible: must be "brcm,sr-pcie-phy" +- reg: base address and length of the PCIe SS register space +- brcm,sr-cdru: phandle to the CDRU syscon node +- brcm,sr-mhb: phandle to the MHB syscon node +- #phy-cells: Must be 1, denotes the PHY index + +For PAXB based root complex, one can have a configuration of up to 8 PHYs +PHY index goes from 0 to 7 + +For the internal PAXC based root complex, PHY index is always 8 + +Example: + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; + + cdru: syscon@6641d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0 0x6641d000 0 0x400>; + }; + + pcie_phy: phy@40000000 { + compatible = "brcm,sr-pcie-phy"; + reg = <0 0x40000000 0 0x800>; + brcm,sr-cdru = <&cdru>; + brcm,sr-mhb = <&mhb>; + #phy-cells = <1>; + }; + + /* users of the PCIe PHY */ + + pcie0: pcie@48000000 { + ... + ... + phys = <&pcie_phy 0>; + phy-names = "pcie-phy"; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt index cafe2197dad9..c3a29c5feea3 100644 --- a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt +++ b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt @@ -3,7 +3,7 @@ Required properties: - compatible: "qca,ar7100-usb-phy" - #phys-cells: should be 0 -- reset-names: "usb-phy"[, "usb-suspend-override"] +- reset-names: "phy"[, "suspend-override"] - resets: references to the reset controllers Example: @@ -11,7 +11,7 @@ Example: usb-phy { compatible = "qca,ar7100-usb-phy"; - reset-names = "usb-phy", "usb-suspend-override"; + reset-names = "phy", "suspend-override"; resets = <&rst 4>, <&rst 3>; #phy-cells = <0>; diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt index 0d34b2b4a6b7..a5f7a4f0dbc1 100644 --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt @@ -47,6 +47,12 @@ Required properties (port (child) node): - PHY_TYPE_PCIE - PHY_TYPE_SATA +Optional properties (PHY_TYPE_USB2 port (child) node): +- mediatek,eye-src : u32, the value of slew rate calibrate +- mediatek,eye-vrt : u32, the selection of VRT reference voltage +- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage +- mediatek,bc12 : bool, enable BC12 of u2phy if support it + Example: u3phy: usb-phy@11290000 { diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index 266a1bb8bb6e..0c7629e88bf3 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -12,7 +12,14 @@ Required properties: "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845, "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845. - - reg: offset and length of register set for PHY's common serdes block. + - reg: + - For "qcom,sdm845-qmp-usb3-phy": + - index 0: address and length of register set for PHY's common serdes + block. + - named register "dp_com" (using reg-names): address and length of the + DP_COM control block. + - For all others: + - offset and length of register set for PHY's common serdes block. - #clock-cells: must be 1 - Phy pll outputs a bunch of clocks for Tx, Rx and Pipe @@ -60,7 +67,10 @@ Required nodes: Required properties for child node: - reg: list of offset and length pairs of register sets for PHY blocks - - tx, rx and pcs. + - index 0: tx + - index 1: rx + - index 2: pcs + - index 3: pcs_misc (optional) - #phy-cells: must be 0 diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt new file mode 100644 index 000000000000..63853b35e083 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-pcie.txt @@ -0,0 +1,24 @@ +* Renesas R-Car generation 3 PCIe PHY + +This file provides information on what the device node for the R-Car +generation 3 PCIe PHY contains. + +Required properties: +- compatible: "renesas,r8a77980-pcie-phy" if the device is a part of the + R8A77980 SoC. +- reg: offset and length of the register block. +- clocks: clock phandle and specifier pair. +- power-domains: power domain phandle and specifier pair. +- resets: reset phandle and specifier pair. +- #phy-cells: see phy-bindings.txt in the same directory, must be <0>. + +Example (R-Car V3H): + + pcie-phy@e65d0000 { + compatible = "renesas,r8a77980-pcie-phy"; + reg = <0 0xe65d0000 0 0x8000>; + #phy-cells = <0>; + clocks = <&cpg CPG_MOD 319>; + power-domains = <&sysc 32>; + resets = <&cpg 319>; + }; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index dbd137c079e2..fb4a204da2bf 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -10,6 +10,8 @@ Required properties: SoC. "renesas,usb2-phy-r8a77965" if the device is a part of an R8A77965 SoC. + "renesas,usb2-phy-r8a77990" if the device is a part of an + R8A77990 SoC. "renesas,usb2-phy-r8a77995" if the device is a part of an R8A77995 SoC. "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device. |