diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/accel/bma180.txt')
-rw-r--r-- | Documentation/devicetree/bindings/iio/accel/bma180.txt | 35 |
1 files changed, 0 insertions, 35 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt deleted file mode 100644 index 33da4a6fdb39..000000000000 --- a/Documentation/devicetree/bindings/iio/accel/bma180.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor - -https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf -http://omapworld.com/BMA180_111_1002839.pdf -http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf - -Required properties: - - - compatible : should be one of: - "bosch,bma023" - "bosch,bma150" - "bosch,bma180" - "bosch,bma250" - "bosch,bma254" - "bosch,smb380" - - reg : the I2C address of the sensor - - vdd-supply : regulator phandle connected to the VDD pin - - vddio-supply : regulator phandle connected to the VDDIO pin - -Optional properties: - - - interrupts : interrupt mapping for GPIO IRQ, it should by configured with - flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING - For the bma250 the first interrupt listed must be the one - connected to the INT1 pin, the second (optional) interrupt - listed must be the one connected to the INT2 pin. - -Example: - -bma180@40 { - compatible = "bosch,bma180"; - reg = <0x40>; - interrupt-parent = <&gpio6>; - interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; -}; |