diff options
Diffstat (limited to 'Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml | 32 |
1 files changed, 14 insertions, 18 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index 44a63fffb4be..eef614962b10 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -38,20 +38,18 @@ properties: the accumulated values, this entry can also have two items which sets energy1/charge1 and energy2/charger2 respectively. Check table 12 of the datasheet for more information on the supported options. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2, 3] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2, 3] + default: 0 adi,accumulation-deadband-microamp: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0 @@ -61,8 +59,7 @@ properties: active high, setting it to zero makets it active low. When this property is present, the GPIO is automatically configured as output and set to control a fan as a function of measured temperature. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] default: 0 @@ -74,13 +71,12 @@ properties: registers. Check table 13 of the datasheet for more information on the supported options. This property cannot be used together with adi,gpio-out-pol. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 2 - maxItems: 2 - items: - enum: [0, 1, 2] - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + enum: [0, 1, 2] + default: 0 required: - compatible |