diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/mipi-dsi-bus.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/display/mipi-dsi-bus.txt | 153 |
1 files changed, 145 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt b/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt index 973c27273772..a336599f6c03 100644 --- a/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt +++ b/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt @@ -16,7 +16,7 @@ The following assumes that only a single peripheral is connected to a DSI host. Experience shows that this is true for the large majority of setups. DSI host --------- +======== In addition to the standard properties and those defined by the parent bus of a DSI host, the following properties apply to a node representing a DSI host. @@ -29,12 +29,24 @@ Required properties: - #size-cells: Should be 0. There are cases where it makes sense to use a different value here. See below. +Optional properties: +- clock-master: boolean. Should be enabled if the host is being used in + conjunction with another DSI host to drive the same peripheral. Hardware + supporting such a configuration generally requires the data on both the busses + to be driven by the same clock. Only the DSI host instance controlling this + clock should contain this property. + DSI peripheral --------------- +============== + +Peripherals with DSI as control bus, or no control bus +------------------------------------------------------ -Peripherals are represented as child nodes of the DSI host's node. Properties -described here apply to all DSI peripherals, but individual bindings may want -to define additional, device-specific properties. +Peripherals with the DSI bus as the primary control bus, or peripherals with +no control bus but use the DSI bus to transmit pixel data are represented +as child nodes of the DSI host's node. Properties described here apply to all +DSI peripherals, but individual bindings may want to define additional, +device-specific properties. Required properties: - reg: The virtual channel number of a DSI peripheral. Must be in the range @@ -49,9 +61,37 @@ case two alternative representations can be chosen: property is the number of the first virtual channel and the second cell is the number of consecutive virtual channels. -Example -------- - +Peripherals with a different control bus +---------------------------------------- + +There are peripherals that have I2C/SPI (or some other non-DSI bus) as the +primary control bus, but are also connected to a DSI bus (mostly for the data +path). Connections between such peripherals and a DSI host can be represented +using the graph bindings [1], [2]. + +Peripherals that support dual channel DSI +----------------------------------------- + +Peripherals with higher bandwidth requirements can be connected to 2 DSI +busses. Each DSI bus/channel drives some portion of the pixel data (generally +left/right half of each line of the display, or even/odd lines of the display). +The graph bindings should be used to represent the multiple DSI busses that are +connected to this peripheral. Each DSI host's output endpoint can be linked to +an input endpoint of the DSI peripheral. + +[1] Documentation/devicetree/bindings/graph.txt +[2] Documentation/devicetree/bindings/media/video-interfaces.txt + +Examples +======== +- (1), (2) and (3) are examples of a DSI host and peripheral on the DSI bus + with different virtual channel configurations. +- (4) is an example of a peripheral on a I2C control bus connected to a + DSI host using of-graph bindings. +- (5) is an example of 2 DSI hosts driving a dual-channel DSI peripheral, + which uses I2C as its primary control bus. + +1) dsi-host { ... @@ -67,6 +107,7 @@ Example ... }; +2) dsi-host { ... @@ -82,6 +123,7 @@ Example ... }; +3) dsi-host { ... @@ -96,3 +138,98 @@ Example ... }; + +4) + i2c-host { + ... + + dsi-bridge@35 { + compatible = "..."; + reg = <0x35>; + + ports { + ... + + port { + bridge_mipi_in: endpoint { + remote-endpoint = <&host_mipi_out>; + }; + }; + }; + }; + }; + + dsi-host { + ... + + ports { + ... + + port { + host_mipi_out: endpoint { + remote-endpoint = <&bridge_mipi_in>; + }; + }; + }; + }; + +5) + i2c-host { + dsi-bridge@35 { + compatible = "..."; + reg = <0x35>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_in: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; + + dsi0-host { + ... + + /* + * this DSI instance drives the clock for both the host + * controllers + */ + clock-master; + + ports { + ... + + port { + dsi0_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi1-host { + ... + + ports { + ... + + port { + dsi1_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; |