1 files changed, 0 insertions, 68 deletions
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
deleted file mode 100644
index da92f5748dee..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Renesas R-Car USB 2.0 clock selector
-
-This file provides information on what the device node for the R-Car USB 2.0
-clock selector.
-
-If you connect an external clock to the USB_EXTAL pin only, you should set
-the clock rate to "usb_extal" node only.
-If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
-is not needed because this is default setting. (Of course, you can set the
-clock rates to both "usb_extal" and "usb_xtal" nodes.
-
-Case 1: An external clock connects to R-Car SoC
-	+----------+   +--- R-Car ---------------------+
-	|External  |---|USB_EXTAL ---> all usb channels|
-	|clock     |   |USB_XTAL                       |
-	+----------+   +-------------------------------+
-In this case, we need this driver with "usb_extal" clock.
-
-Case 2: An oscillator connects to R-Car SoC
-	+----------+   +--- R-Car ---------------------+
-	|Oscillator|---|USB_EXTAL -+-> all usb channels|
-	|          |---|USB_XTAL --+                   |
-	+----------+   +-------------------------------+
-In this case, we don't need this selector.
-
-Required properties:
-- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of
-	      an R8A7795 SoC.
-	      "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of
-	      an R8A77960 SoC.
-	      "renesas,r8a77961-rcar-usb2-clock-sel" if the device if a part of
-	      an R8A77961 SoC.
-	      "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3
-	      compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the USB 2.0 clock selector register block.
-- clocks: A list of phandles and specifier pairs.
-- clock-names: Name of the clocks.
- - The functional clock of USB 2.0 host side must be "ehci_ohci"
- - The functional clock of HS-USB side must be "hs-usb-if"
- - The USB_EXTAL clock pin must be "usb_extal"
- - The USB_XTAL clock pin must be "usb_xtal"
-- #clock-cells: Must be 0
-- power-domains: A phandle and symbolic PM domain specifier.
-                 See power/renesas,rcar-sysc.yaml.
-- resets: A list of phandles and specifier pairs.
-- reset-names: Name of the resets.
- - The reset of USB 2.0 host side must be "ehci_ohci"
- - The reset of HS-USB side must be "hs-usb-if"
-
-Example (R-Car H3):
-
-	usb2_clksel: clock-controller@e6590630 {
-		compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
-			     "renesas,rcar-gen3-usb2-clock-sel";
-		reg = <0 0xe6590630 0 0x02>;
-		clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
-			 <&usb_extal>, <&usb_xtal>;
-		clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
-		#clock-cells = <0>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		resets = <&cpg 703>, <&cpg 704>;
-		reset-names = "ehci_ohci", "hs-usb-if";
-	};