diff options
| -rw-r--r-- | arch/powerpc/boot/dts/ge_imp3a.dts | 255 | ||||
| -rw-r--r-- | arch/powerpc/configs/85xx/ge_imp3a_defconfig | 257 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/Kconfig | 15 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/85xx/ge_imp3a.c | 246 | ||||
| -rw-r--r-- | drivers/gpio/gpio-ge.c | 28 |
6 files changed, 802 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/ge_imp3a.dts b/arch/powerpc/boot/dts/ge_imp3a.dts new file mode 100644 index 000000000000..fefae416a097 --- /dev/null +++ b/arch/powerpc/boot/dts/ge_imp3a.dts @@ -0,0 +1,255 @@ +/* + * GE IMP3A Device Tree Source + * + * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: P2020 DS Device Tree Source + * Copyright 2009 Freescale Semiconductor Inc. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "GE_IMP3A"; + compatible = "ge,imp3a"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fef05000 { + reg = <0 0xfef05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xe8000000 0x08000000 + 0x3 0x0 0x0 0xfc100000 0x00020000 + 0x4 0x0 0x0 0xfc000000 0x00008000 + 0x5 0x0 0x0 0xfc008000 0x00008000 + 0x6 0x0 0x0 0xfee00000 0x00040000 + 0x7 0x0 0x0 0xfee80000 0x00040000>; + + /* nor@0,0 is a mirror of part of the memory in nor@1,0 + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + nor@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "ge,imp3a-fpga-regs"; + reg = <0x4 0x0 0x20>; + }; + + gef_pic: pic@4,20 { + #interrupt-cells = <1>; + interrupt-controller; + device_type = "interrupt-controller"; + compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x20 0x20>; + interrupts = <6 7 0 0>; + }; + + gef_gpio: gpio@4,400 { + #gpio-cells = <2>; + compatible = "ge,imp3a-gpio"; + reg = <0x4 0x400 0x24>; + gpio-controller; + }; + + wdt@4,800 { + compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x800 0x8>; + interrupts = <10 4>; + interrupt-parent = <&gef_pic>; + }; + + /* Second watchdog available, driver currently supports one. + wdt@4,808 { + compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x808 0x8>; + interrupts = <9 4>; + interrupt-parent = <&gef_pic>; + }; + */ + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; + + nand@7,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x7 0x0 0x40000>; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0 0xfef00000 0x100000>; + + i2c@3000 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x51>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0xc 0x4>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&gef_pic>; + interrupts = <0xb 0x4>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "gmii"; + }; + + enet2: ethernet@26000 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>; + reg = <0 0xfef08000 0 0x1000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@fef09000 { + reg = <0 0xfef09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + + }; + + pci2: pcie@fef0a000 { + reg = <0 0xfef0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig new file mode 100644 index 000000000000..f8c51a4ab995 --- /dev/null +++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig @@ -0,0 +1,257 @@ +CONFIG_PPC_85xx=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_SPARSE_IRQ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_GE_IMP3A=y +CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y +CONFIG_CPM2=y +CONFIG_HIGHMEM=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_HZ_1000=y +CONFIG_PREEMPT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=m +CONFIG_MATH_EMULATION=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_FORCE_MAX_ZONEORDER=17 +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MSI=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_LOAD_CIS is not set +CONFIG_YENTA=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET6_AH=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NET_PKTGEN=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSL_ELBC=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_MISC_DEVICES=y +CONFIG_DS1682=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_SIL24=y +# CONFIG_ATA_SFF is not set +CONFIG_NETDEVICES=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL_TRAP=y +CONFIG_TUN=m +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_FS_ENET=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_QE=m +CONFIG_NVRAM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_CPM=m +CONFIG_I2C_MPC=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GE_FPGA=y +CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_LM92=y +CONFIG_WATCHDOG=y +CONFIG_GEF_WDT=y +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_HID_DRAGONRISE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_ORTEK=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +CONFIG_HID_SMARTJOYPLUS=y +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +CONFIG_HID_ZEROPLUS=y +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_STORAGE=y +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_INTF_PROC is not set +CONFIG_RTC_DRV_RX8581=y +CONFIG_DMADEVICES=y +CONFIG_FSL_DMA=y +# CONFIG_NET_DMA is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +CONFIG_NTFS_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V4=y +CONFIG_CIFS=m +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_CRC_CCITT=y +CONFIG_CRC_T10DIF=y +CONFIG_LIBCRC32C=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index b221236aade8..4c91ea97d885 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -172,6 +172,21 @@ config SBC8560 help This option enables support for the Wind River SBC8560 board +config GE_IMP3A + bool "GE Intelligent Platforms IMP3A" + select DEFAULT_UIMAGE + select SWIOTLB + select MMIO_NVRAM + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select GE_FPGA + help + This option enables support for the GE Intelligent Platforms IMP3A + board. + + This board is a 3U CompactPCI Single Board Computer with a Freescale + P2020 processor. + config P2041_RDB bool "Freescale P2041 RDB" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 9cb2d4320dcc..2125d4ca068a 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -27,3 +27,4 @@ obj-$(CONFIG_SBC8548) += sbc8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o +obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c new file mode 100644 index 000000000000..d50056f424f6 --- /dev/null +++ b/arch/powerpc/platforms/85xx/ge_imp3a.c @@ -0,0 +1,246 @@ +/* + * GE IMP3A Board Setup + * + * Author Martyn Welch <martyn.welch@ge.com> + * + * Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: mpc85xx_ds.c (MPC85xx DS Board Setup) + * Copyright 2007 Freescale Semiconductor Inc. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/interrupt.h> +#include <linux/of_platform.h> +#include <linux/memblock.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <asm/swiotlb.h> +#include <asm/nvram.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" +#include <sysdev/ge/ge_pic.h> + +void __iomem *imp3a_regs; + +void __init ge_imp3a_pic_init(void) +{ + struct mpic *mpic; + struct device_node *np; + struct device_node *cascade_node = NULL; + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) { + mpic = mpic_alloc(NULL, 0, + MPIC_NO_RESET | + MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + } else { + mpic = mpic_alloc(NULL, 0, + MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + } + + BUG_ON(mpic == NULL); + mpic_init(mpic); + /* + * There is a simple interrupt handler in the main FPGA, this needs + * to be cascaded into the MPIC + */ + for_each_node_by_type(np, "interrupt-controller") + if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) { + cascade_node = np; + break; + } + + if (cascade_node == NULL) { + printk(KERN_WARNING "IMP3A: No FPGA PIC\n"); + return; + } + + gef_pic_init(cascade_node); + of_node_put(cascade_node); +} + +#ifdef CONFIG_PCI +static int primary_phb_addr; +#endif /* CONFIG_PCI */ + +/* + * Setup the architecture + */ +static void __init ge_imp3a_setup_arch(void) +{ + struct device_node *regs; +#ifdef CONFIG_PCI + struct device_node *np; + struct pci_controller *hose; +#endif + dma_addr_t max = 0xffffffff; + + if (ppc_md.progress) + ppc_md.progress("ge_imp3a_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,mpc8540-pci") || + of_device_is_compatible(np, "fsl,mpc8548-pcie") || + of_device_is_compatible(np, "fsl,p2020-pcie")) { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == primary_phb_addr) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } + } +#endif + + mpc85xx_smp_init(); + +#ifdef CONFIG_SWIOTLB + if (memblock_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; + } +#endif + + /* Remap basic board registers */ + regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs"); + if (regs) { + imp3a_regs = of_iomap(regs, 0); + if (imp3a_regs == NULL) + printk(KERN_WARNING "Unable to map board registers\n"); + of_node_put(regs); + } + +#if defined(CONFIG_MMIO_NVRAM) + mmio_nvram_init(); +#endif + + printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n"); +} + +/* Return the PCB revision */ +static unsigned int ge_imp3a_get_pcb_rev(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs); + return (reg >> 8) & 0xff; +} + +/* Return the board (software) revision */ +static unsigned int ge_imp3a_get_board_rev(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x2); + return reg & 0xff; +} + +/* Return the FPGA revision */ +static unsigned int ge_imp3a_get_fpga_rev(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x2); + return (reg >> 8) & 0xff; +} + +/* Return compactPCI Geographical Address */ +static unsigned int ge_imp3a_get_cpci_geo_addr(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x6); + return (reg & 0x0f00) >> 8; +} + +/* Return compactPCI System Controller Status */ +static unsigned int ge_imp3a_get_cpci_is_syscon(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x6); + return reg & (1 << 12); +} + +static void ge_imp3a_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); + + seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(), + ('A' + ge_imp3a_get_board_rev() - 1)); + + seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev()); + + seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr()); + + seq_printf(m, "cPCI syscon\t: %s\n", + ge_imp3a_get_cpci_is_syscon() ? "yes" : "no"); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ge_imp3a_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "ge,IMP3A")) { +#ifdef CONFIG_PCI + primary_phb_addr = 0x9000; +#endif + return 1; + } + + return 0; +} + +machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices); + +machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier); + +define_machine(ge_imp3a) { + .name = "GE_IMP3A", + .probe = ge_imp3a_probe, + .setup_arch = ge_imp3a_setup_arch, + .init_IRQ = ge_imp3a_pic_init, + .show_cpuinfo = ge_imp3a_show_cpuinfo, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/drivers/gpio/gpio-ge.c b/drivers/gpio/gpio-ge.c index f8e628952921..7b95a4a8318c 100644 --- a/drivers/gpio/gpio-ge.c +++ b/drivers/gpio/gpio-ge.c @@ -162,6 +162,34 @@ static int __init gef_gpio_init(void) } } + for_each_compatible_node(np, NULL, "ge,imp3a-gpio") { + + pr_debug("%s: Initialising GE GPIO\n", np->full_name); + + /* Allocate chip structure */ + gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); + if (!gef_gpio_chip) { + pr_err("%s: Unable to allocate structure\n", + np->full_name); + continue; + } + + /* Setup pointers to chip functions */ + gef_gpio_chip->gc.of_gpio_n_cells = 2; + gef_gpio_chip->gc.ngpio = 16; + gef_gpio_chip->gc.direction_input = gef_gpio_dir_in; + gef_gpio_chip->gc.direction_output = gef_gpio_dir_out; + gef_gpio_chip->gc.get = gef_gpio_get; + gef_gpio_chip->gc.set = gef_gpio_set; + + /* This function adds a memory mapped GPIO chip */ + retval = of_mm_gpiochip_add(np, gef_gpio_chip); + if (retval) { + kfree(gef_gpio_chip); + pr_err("%s: Unable to add GPIO\n", np->full_name); + } + } + return 0; }; arch_initcall(gef_gpio_init); |