diff options
50 files changed, 280 insertions, 254 deletions
diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt index f17bc4c9dff9..400c0c270d2e 100644 --- a/Documentation/arm/keystone/Overview.txt +++ b/Documentation/arm/keystone/Overview.txt @@ -49,24 +49,6 @@ specified through DTS. Following are the DTS used:- The device tree documentation for the keystone machines are located at Documentation/devicetree/bindings/arm/keystone/keystone.txt -Known issues & workaround -------------------------- - -Some of the device drivers used on keystone are re-used from that from -DaVinci and other TI SoCs. These device drivers may use clock APIs directly. -Some of the keystone specific drivers such as netcp uses run time power -management API instead to enable clock. As this API has limitations on -keystone, following workaround is needed to boot Linux. - - Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise - clock frameworks will try to disable clocks that are unused and disable - the hardware. This is because netcp related power domain and clock - domains are enabled in u-boot as run time power management API currently - doesn't enable clocks for netcp due to a limitation. This workaround is - expected to be removed in the future when proper API support becomes - available. Until then, this work around is needed. - - Document Author --------------- Murali Karicheri <m-karicheri2@ti.com> diff --git a/MAINTAINERS b/MAINTAINERS index 3f92804f5dac..cba790b42f23 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1931,7 +1931,7 @@ S: Supported F: drivers/i2c/busses/i2c-at91.c ATMEL ISI DRIVER -M: Josh Wu <josh.wu@atmel.com> +M: Ludovic Desroches <ludovic.desroches@atmel.com> L: linux-media@vger.kernel.org S: Supported F: drivers/media/platform/soc_camera/atmel-isi.c @@ -1950,7 +1950,8 @@ S: Supported F: drivers/net/ethernet/cadence/ ATMEL NAND DRIVER -M: Josh Wu <josh.wu@atmel.com> +M: Wenyou Yang <wenyou.yang@atmel.com> +M: Josh Wu <rainyfeeling@outlook.com> L: linux-mtd@lists.infradead.org S: Supported F: drivers/mtd/nand/atmel_nand* diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 4e0ad3b82796..0962f2fa3f6e 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -155,21 +155,21 @@ label = "keyswitch_in"; gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; error_in { label = "error_in"; gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; linux,code = <29>; - gpio-key,wakeup; + wakeup-source; }; btn { label = "btn"; gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; linux,code = <31>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index f89598af4c2b..6bf873e7d96c 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -159,7 +159,7 @@ label = "Button"; gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index bf18ece0c027..229e989eb60d 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -24,15 +24,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - main_xtal { clock-frequency = <18432000>; }; @@ -94,14 +85,14 @@ label = "PB_RST"; gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; user { label = "PB_USER"; gpios = <&pioB 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts index f0b1563cb3f1..50a14568f094 100644 --- a/arch/arm/boot/dts/at91-kizbox2.dts +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -171,21 +171,21 @@ label = "PB_PROG"; gpios = <&pioE 27 GPIO_ACTIVE_LOW>; linux,code = <0x102>; - gpio-key,wakeup; + wakeup-source; }; reset { label = "PB_RST"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; user { label = "PB_USER"; gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; linux,code = <0x101>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts index 9f72b4932634..9682d105d4d8 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -98,14 +98,14 @@ label = "PB_PROG"; gpios = <&pioC 17 GPIO_ACTIVE_LOW>; linux,code = <0x102>; - gpio-key,wakeup; + wakeup-source; }; reset { label = "PB_RST"; gpios = <&pioC 16 GPIO_ACTIVE_LOW>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index a9aef53ab764..4f2eebf4a560 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -183,7 +183,7 @@ label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index e07c2b206beb..ad6de73ed5a5 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -45,6 +45,7 @@ /dts-v1/; #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" +#include <dt-bindings/mfd/atmel-flexcom.h> / { model = "Atmel SAMA5D2 Xplained"; @@ -59,15 +60,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -91,6 +83,22 @@ status = "okay"; }; + sdmmc0: sdio-host@a0000000 { + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + non-removable; + mmc-ddr-1_8v; + status = "okay"; + }; + + sdmmc1: sdio-host@b0000000 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + status = "okay"; /* conflict with qspi0 */ + }; + apb { spi0: spi@f8000000 { pinctrl-names = "default"; @@ -181,12 +189,49 @@ }; }; + flx0: flexcom@f8034000 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&flx0_clk>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <32>; + status = "okay"; + }; + }; + uart3: serial@fc008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; status = "okay"; }; + flx4: flexcom@fc018000 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <0>, <0>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx4_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "okay"; + }; + }; + i2c1: i2c@fc028000 { dmas = <0>, <0>; pinctrl-names = "default"; @@ -201,6 +246,18 @@ }; pinctrl@fc038000 { + pinctrl_flx0_default: flx0_default { + pinmux = <PIN_PB28__FLEXCOM0_IO0>, + <PIN_PB29__FLEXCOM0_IO1>; + bias-disable; + }; + + pinctrl_flx4_default: flx4_default { + pinmux = <PIN_PD12__FLEXCOM4_IO0>, + <PIN_PD13__FLEXCOM4_IO1>; + bias-disable; + }; + pinctrl_i2c0_default: i2c0_default { pinmux = <PIN_PD21__TWD0>, <PIN_PD22__TWCK0>; @@ -227,6 +284,46 @@ bias-disable; }; + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = <PIN_PA1__SDMMC0_CMD>, + <PIN_PA2__SDMMC0_DAT0>, + <PIN_PA3__SDMMC0_DAT1>, + <PIN_PA4__SDMMC0_DAT2>, + <PIN_PA5__SDMMC0_DAT3>, + <PIN_PA6__SDMMC0_DAT4>, + <PIN_PA7__SDMMC0_DAT5>, + <PIN_PA8__SDMMC0_DAT6>, + <PIN_PA9__SDMMC0_DAT7>; + bias-pull-up; + }; + + ck_cd_rstn_vddsel { + pinmux = <PIN_PA0__SDMMC0_CK>, + <PIN_PA10__SDMMC0_RSTN>, + <PIN_PA11__SDMMC0_VDDSEL>, + <PIN_PA13__SDMMC0_CD>; + bias-disable; + }; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = <PIN_PA28__SDMMC1_CMD>, + <PIN_PA18__SDMMC1_DAT0>, + <PIN_PA19__SDMMC1_DAT1>, + <PIN_PA20__SDMMC1_DAT2>, + <PIN_PA21__SDMMC1_DAT3>; + bias-pull-up; + }; + + conf-ck_cd { + pinmux = <PIN_PA22__SDMMC1_CK>, + <PIN_PA30__SDMMC1_CD>; + bias-disable; + }; + }; + pinctrl_spi0_default: spi0_default { pinmux = <PIN_PA14__SPI0_SPCK>, <PIN_PA15__SPI0_MOSI>, diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 8488ac53d22d..ff888d21c786 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -315,7 +315,7 @@ label = "PB_USER"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 45371a1b61b3..131614f28e75 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -50,7 +50,6 @@ compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5"; chosen { - bootargs = "ignore_loglevel earlyprintk"; stdout-path = "serial0:115200n8"; }; @@ -59,15 +58,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -235,7 +225,7 @@ label = "pb_user1"; gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 6d272c0125e3..2d4a33100af6 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -50,7 +50,6 @@ compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5"; chosen { - bootargs = "ignore_loglevel earlyprintk"; stdout-path = "serial0:115200n8"; }; @@ -59,15 +58,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -304,7 +294,7 @@ label = "pb_user1"; gpios = <&pioE 13 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 8dab4b75ca97..f90e1c2d3caa 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -21,15 +21,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 2e92ac020f23..55bd51f07fa6 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -22,15 +22,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -149,7 +140,7 @@ ti,debounce-tol = /bits/ 16 <65535>; ti,debounce-max = /bits/ 16 <1>; - linux,wakeup; + wakeup-source; }; }; @@ -193,28 +184,28 @@ label = "button_0"; gpios = <&pioA 27 GPIO_ACTIVE_LOW>; linux,code = <256>; - gpio-key,wakeup; + wakeup-source; }; button_1 { label = "button_1"; gpios = <&pioA 26 GPIO_ACTIVE_LOW>; linux,code = <257>; - gpio-key,wakeup; + wakeup-source; }; button_2 { label = "button_2"; gpios = <&pioA 25 GPIO_ACTIVE_LOW>; linux,code = <258>; - gpio-key,wakeup; + wakeup-source; }; button_3 { label = "button_3"; gpios = <&pioA 24 GPIO_ACTIVE_LOW>; linux,code = <259>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 23381276ffb8..59df9d73d276 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -22,15 +22,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <16367660>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -213,14 +204,14 @@ label = "left_click"; gpios = <&pioC 5 GPIO_ACTIVE_LOW>; linux,code = <272>; - gpio-key,wakeup; + wakeup-source; }; right_click { label = "right_click"; gpios = <&pioC 4 GPIO_ACTIVE_LOW>; linux,code = <273>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 57548a2c5a1e..e9cc99b6353a 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -19,15 +19,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -206,14 +197,14 @@ label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 9d16ef8453c5..2400c99134f7 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -24,15 +24,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -323,14 +314,14 @@ label = "left_click"; gpios = <&pioB 6 GPIO_ACTIVE_LOW>; linux,code = <272>; - gpio-key,wakeup; + wakeup-source; }; right_click { label = "right_click"; gpios = <&pioB 7 GPIO_ACTIVE_LOW>; linux,code = <273>; - gpio-key,wakeup; + wakeup-source; }; left { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index acf3451a332d..ca4ddf86817a 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -23,15 +23,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <16000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -219,7 +210,7 @@ label = "Enter"; gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 558c9f220bed..f10566f759cd 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -22,15 +22,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -225,14 +216,14 @@ label = "right_click"; gpios = <&pioB 0 GPIO_ACTIVE_LOW>; linux,code = <273>; - gpio-key,wakeup; + wakeup-source; }; left_click { label = "left_click"; gpios = <&pioB 1 GPIO_ACTIVE_LOW>; linux,code = <272>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 26112ebd15fc..b098ad8cd93a 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -13,17 +13,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - }; - - clocks { slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index bc672fb91466..fe99231cbde5 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1459,8 +1459,8 @@ interrupt-names = "tx", "rx"; dmas = <&sdma_xbar 133>, <&sdma_xbar 132>; dma-names = "tx", "rx"; - clocks = <&mcasp3_ahclkx_mux>; - clock-names = "fck"; + clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>; + clock-names = "fck", "ahclkx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi index 01aef230773d..5acbd0dcc2ab 100644 --- a/arch/arm/boot/dts/k2l-netcp.dtsi +++ b/arch/arm/boot/dts/k2l-netcp.dtsi @@ -137,7 +137,7 @@ netcp: netcp@26000000 { /* NetCP address range */ ranges = <0 0x26000000 0x1000000>; - clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>; dma-coherent; ti,navigator-dmas = <&dma_gbe 0>, diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index c56ab6bbfe3c..0e46560551f4 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -40,7 +40,7 @@ }; poweroff@12100 { compatible = "qnap,power-off"; - reg = <0x12000 0x100>; + reg = <0x12100 0x100>; clocks = <&gate_clk 7>; }; spi@10600 { diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 8fd8ef2c72da..85f0373df498 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -86,6 +86,10 @@ }; }; +&emmc { + /delete-property/mmc-hs200-1_8v; +}; + &gpio_keys { pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 6a79c9c526b8..04ea209f1737 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -452,8 +452,10 @@ clock-names = "tsadc", "apb_pclk"; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; - pinctrl-names = "default"; - pinctrl-0 = <&otp_out>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; status = "disabled"; @@ -1395,6 +1397,10 @@ }; tsadc { + otp_gpio: otp-gpio { + rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>; + }; + otp_out: otp-out { rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index d9a9aca1ccfd..e812f5c1bf70 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -49,7 +49,7 @@ label = "pb_user1"; gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; - gpio-key,wakeup; + wakeup-source; }; }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 15bbaf690047..2193637b9cd2 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1300,7 +1300,7 @@ }; watchdog@fc068640 { - compatible = "atmel,at91sam9260-wdt"; + compatible = "atmel,sama5d4-wdt"; reg = <0xfc068640 0x10>; clocks = <&clk32k>; status = "disabled"; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index 12edafefd44a..9beea8976584 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -115,7 +115,7 @@ label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 68c0de36c339..8cc6edb29694 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -143,7 +143,7 @@ label = "user_pb"; gpios = <&pioB 10 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 6736bae43a5b..0d5acc2cdc8e 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -158,7 +158,7 @@ interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; - spi-num-chipselects = <5>; + spi-num-chipselects = <6>; status = "disabled"; }; @@ -170,7 +170,7 @@ interrupts = <68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI1>; clock-names = "dspi"; - spi-num-chipselects = <5>; + spi-num-chipselects = <4>; status = "disabled"; }; @@ -461,6 +461,8 @@ clock-names = "adc"; #io-channel-cells = <1>; status = "disabled"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; }; esdhc0: esdhc@400b1000 { @@ -472,8 +474,6 @@ <&clks VF610_CLK_ESDHC0>; clock-names = "ipg", "ahb", "per"; status = "disabled"; - fsl,adck-max-frequency = <30000000>, <40000000>, - <20000000>; }; esdhc1: esdhc@400b2000 { diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 1b1e5acd76e2..e4b1be66b3f5 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -125,7 +125,6 @@ CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y -CONFIG_SSB=m CONFIG_MFD_ATMEL_HLCDC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index a0c57ac88b27..63f7e6ce649a 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -129,7 +129,6 @@ CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y # CONFIG_HWMON is not set -CONFIG_SSB=m CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S index 72d622baaad3..df1d44bdc375 100644 --- a/arch/arm/mach-dove/include/mach/entry-macro.S +++ b/arch/arm/mach-dove/include/mach/entry-macro.S @@ -18,13 +18,13 @@ @ check low interrupts ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] - mov \irqnr, #31 + mov \irqnr, #32 ands \irqstat, \irqstat, \tmp @ if no low interrupts set, check high interrupts ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF] - moveq \irqnr, #63 + moveq \irqnr, #64 andeqs \irqstat, \irqstat, \tmp @ find first active interrupt source diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 8e7976a4c3e7..cfc696b972f3 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -177,6 +177,7 @@ static struct irq_chip imx_gpc_chip = { .irq_unmask = imx_gpc_irq_unmask, .irq_retrigger = irq_chip_retrigger_hierarchy, .irq_set_wake = imx_gpc_irq_set_wake, + .irq_set_type = irq_chip_set_type_parent, #ifdef CONFIG_SMP .irq_set_affinity = irq_chip_set_affinity_parent, #endif diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 5305ec7341ec..79e1f876d1c9 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -143,9 +143,9 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) * Ensure that CPU power state is set to ON to avoid CPU * powerdomain transition on wfi */ - clkdm_wakeup(cpu1_clkdm); - omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON); - clkdm_allow_idle(cpu1_clkdm); + clkdm_wakeup_nolock(cpu1_clkdm); + pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON); + clkdm_allow_idle_nolock(cpu1_clkdm); if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { while (gic_dist_disabled()) { diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index cc8a987149e2..48495ad82aba 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -890,6 +890,36 @@ static int _init_opt_clks(struct omap_hwmod *oh) return ret; } +static void _enable_optional_clocks(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + int i; + + pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name); + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) { + pr_debug("omap_hwmod: enable %s:%s\n", oc->role, + __clk_get_name(oc->_clk)); + clk_enable(oc->_clk); + } +} + +static void _disable_optional_clocks(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + int i; + + pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name); + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) + if (oc->_clk) { + pr_debug("omap_hwmod: disable %s:%s\n", oc->role, + __clk_get_name(oc->_clk)); + clk_disable(oc->_clk); + } +} + /** * _enable_clocks - enable hwmod main clock and interface clocks * @oh: struct omap_hwmod * @@ -917,6 +947,9 @@ static int _enable_clocks(struct omap_hwmod *oh) clk_enable(os->_clk); } + if (oh->flags & HWMOD_OPT_CLKS_NEEDED) + _enable_optional_clocks(oh); + /* The opt clocks are controlled by the device driver. */ return 0; @@ -948,41 +981,14 @@ static int _disable_clocks(struct omap_hwmod *oh) clk_disable(os->_clk); } + if (oh->flags & HWMOD_OPT_CLKS_NEEDED) + _disable_optional_clocks(oh); + /* The opt clocks are controlled by the device driver. */ return 0; } -static void _enable_optional_clocks(struct omap_hwmod *oh) -{ - struct omap_hwmod_opt_clk *oc; - int i; - - pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name); - - for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) - if (oc->_clk) { - pr_debug("omap_hwmod: enable %s:%s\n", oc->role, - __clk_get_name(oc->_clk)); - clk_enable(oc->_clk); - } -} - -static void _disable_optional_clocks(struct omap_hwmod *oh) -{ - struct omap_hwmod_opt_clk *oc; - int i; - - pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name); - - for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) - if (oc->_clk) { - pr_debug("omap_hwmod: disable %s:%s\n", oc->role, - __clk_get_name(oc->_clk)); - clk_disable(oc->_clk); - } -} - /** * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index ca6df1a73475..76bce11c85a4 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -523,6 +523,8 @@ struct omap_hwmod_omap4_prcm { * HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up * events by calling _reconfigure_io_chain() when a device is enabled * or idled. + * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to + * operate and they need to be handled at the same time as the main_clk. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -538,6 +540,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_FORCE_MSTANDBY (1 << 11) #define HWMOD_SWSUP_SIDLE_ACT (1 << 12) #define HWMOD_RECONFIG_IO_CHAIN (1 << 13) +#define HWMOD_OPT_CLKS_NEEDED (1 << 14) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 51d1ecb384bd..ee4e04434a94 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1298,6 +1298,44 @@ static struct omap_hwmod dra7xx_mcspi4_hwmod = { }; /* + * 'mcasp' class + * + */ +static struct omap_hwmod_class_sysconfig dra7xx_mcasp_sysc = { + .sysc_offs = 0x0004, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type3, +}; + +static struct omap_hwmod_class dra7xx_mcasp_hwmod_class = { + .name = "mcasp", + .sysc = &dra7xx_mcasp_sysc, +}; + +/* mcasp3 */ +static struct omap_hwmod_opt_clk mcasp3_opt_clks[] = { + { .role = "ahclkx", .clk = "mcasp3_ahclkx_mux" }, +}; + +static struct omap_hwmod dra7xx_mcasp3_hwmod = { + .name = "mcasp3", + .class = &dra7xx_mcasp_hwmod_class, + .clkdm_name = "l4per2_clkdm", + .main_clk = "mcasp3_aux_gfclk_mux", + .flags = HWMOD_OPT_CLKS_NEEDED, + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = mcasp3_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(mcasp3_opt_clks), +}; + +/* * 'mmc' class * */ @@ -2566,6 +2604,22 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_per2 -> mcasp3 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp3 = { + .master = &dra7xx_l4_per2_hwmod, + .slave = &dra7xx_mcasp3_hwmod, + .clk = "l4_root_clk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> mcasp3 */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp3 = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_mcasp3_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_per1 -> elm */ static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = { .master = &dra7xx_l4_per1_hwmod, @@ -3308,6 +3362,8 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_wkup__dcan1, &dra7xx_l4_per2__dcan2, &dra7xx_l4_per2__cpgmac0, + &dra7xx_l4_per2__mcasp3, + &dra7xx_l3_main_1__mcasp3, &dra7xx_gmac__mdio, &dra7xx_l4_cfg__dma_system, &dra7xx_l3_main_1__dss, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index b1288f56d509..6256052893ec 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -144,6 +144,7 @@ static struct omap_hwmod dm81xx_l4_ls_hwmod = { .name = "l4_ls", .clkdm_name = "alwon_l3s_clkdm", .class = &l4_hwmod_class, + .flags = HWMOD_NO_IDLEST, }; /* @@ -155,6 +156,7 @@ static struct omap_hwmod dm81xx_l4_hs_hwmod = { .name = "l4_hs", .clkdm_name = "alwon_l3_med_clkdm", .class = &l4_hwmod_class, + .flags = HWMOD_NO_IDLEST, }; /* L3 slow -> L4 ls peripheral interface running at 125MHz */ @@ -850,6 +852,7 @@ static struct omap_hwmod dm816x_emac0_hwmod = { .name = "emac0", .clkdm_name = "alwon_ethernet_clkdm", .class = &dm816x_emac_hwmod_class, + .flags = HWMOD_NO_IDLEST, }; static struct omap_hwmod_ocp_if dm81xx_l4_hs__emac0 = { diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 1dfe34654c43..58144779dec4 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -24,9 +24,6 @@ #include <linux/platform_data/iommu-omap.h> #include <linux/platform_data/wkup_m3.h> -#include <asm/siginfo.h> -#include <asm/signal.h> - #include "common.h" #include "common-board-devices.h" #include "dss-common.h" @@ -385,29 +382,6 @@ static void __init omap3_pandora_legacy_init(void) } #endif /* CONFIG_ARCH_OMAP3 */ -#ifdef CONFIG_SOC_TI81XX -static int fault_fixed_up; - -static int t410_abort_handler(unsigned long addr, unsigned int fsr, - struct pt_regs *regs) -{ - if ((fsr == 0x406 || fsr == 0xc06) && !fault_fixed_up) { - pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", - addr, fsr); - fault_fixed_up = 1; - return 0; - } - - return 1; -} - -static void __init t410_abort_init(void) -{ - hook_fault_code(16 + 6, t410_abort_handler, SIGBUS, BUS_OBJERR, - "imprecise external abort"); -} -#endif - #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) static struct iommu_platform_data omap4_iommu_pdata = { .reset_name = "mmu_cache", @@ -536,9 +510,6 @@ static struct pdata_init pdata_quirks[] __initdata = { { "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, }, { "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, }, #endif -#ifdef CONFIG_SOC_TI81XX - { "hp,t410", t410_abort_init, }, -#endif #ifdef CONFIG_SOC_OMAP5 { "ti,omap5-uevm", omap5_uevm_legacy_init, }, #endif diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 87b98bf92366..2dbd3785ee6f 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -301,11 +301,11 @@ static void omap3_pm_idle(void) if (omap_irq_pending()) return; - trace_cpu_idle(1, smp_processor_id()); + trace_cpu_idle_rcuidle(1, smp_processor_id()); omap_sram_idle(); - trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); + trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id()); } #ifdef CONFIG_SUSPEND diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S index 79eb502a1e64..73919a36b577 100644 --- a/arch/arm/mach-orion5x/include/mach/entry-macro.S +++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S @@ -21,5 +21,5 @@ @ find cause bits that are unmasked ands \irqstat, \irqstat, \tmp @ clear Z flag if any clzne \irqnr, \irqstat @ calc irqnr - rsbne \irqnr, \irqnr, #31 + rsbne \irqnr, \irqnr, #32 .endm diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 13eba2b26e0a..8fbfb10047ec 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -344,7 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd) { palm_bl_power = bl; palm_lcd_power = lcd; - pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup)); + pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup)); platform_device_register(&palm27x_backlight); } #endif diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index aebf6de62468..0b5c3876720c 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -169,7 +169,7 @@ static inline void palmtc_keys_init(void) {} #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE) static struct pwm_lookup palmtc_pwm_lookup[] = { PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS, - PWM_PERIOD_NORMAL), + PWM_POLARITY_NORMAL), }; static struct platform_pwm_backlight_data palmtc_backlight_data = { diff --git a/arch/arm/mach-shmobile/setup-r8a7793.c b/arch/arm/mach-shmobile/setup-r8a7793.c index 1d2825cb7a65..5fce87f7f254 100644 --- a/arch/arm/mach-shmobile/setup-r8a7793.c +++ b/arch/arm/mach-shmobile/setup-r8a7793.c @@ -19,7 +19,7 @@ #include "common.h" #include "rcar-gen2.h" -static const char *r8a7793_boards_compat_dt[] __initconst = { +static const char * const r8a7793_boards_compat_dt[] __initconst = { "renesas,r8a7793", NULL, }; diff --git a/arch/arm/mach-zx/Kconfig b/arch/arm/mach-zx/Kconfig index 7fdc5bf24f9b..446334a25cf5 100644 --- a/arch/arm/mach-zx/Kconfig +++ b/arch/arm/mach-zx/Kconfig @@ -13,7 +13,7 @@ config SOC_ZX296702 select ARM_GLOBAL_TIMER select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select PM_GENERIC_DOMAINS + select PM_GENERIC_DOMAINS if PM help Support for ZTE ZX296702 SoC which is a dual core CortexA9MP endif diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c index 9f1856948758..bf500e0e7362 100644 --- a/drivers/bus/omap-ocp2scp.c +++ b/drivers/bus/omap-ocp2scp.c @@ -117,7 +117,7 @@ static struct platform_driver omap_ocp2scp_driver = { module_platform_driver(omap_ocp2scp_driver); -MODULE_ALIAS("platform: omap-ocp2scp"); +MODULE_ALIAS("platform:omap-ocp2scp"); MODULE_AUTHOR("Texas Instruments Inc."); MODULE_DESCRIPTION("OMAP OCP2SCP driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig index 9d5068248aa0..0a4ea809a61b 100644 --- a/drivers/soc/mediatek/Kconfig +++ b/drivers/soc/mediatek/Kconfig @@ -23,6 +23,7 @@ config MTK_PMIC_WRAP config MTK_SCPSYS bool "MediaTek SCPSYS Support" depends on ARCH_MEDIATEK || COMPILE_TEST + default ARM64 && ARCH_MEDIATEK select REGMAP select MTK_INFRACFG select PM_GENERIC_DOMAINS if PM diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c index f3a0b6a4b54e..8c03a80b482d 100644 --- a/drivers/soc/ti/knav_qmss_queue.c +++ b/drivers/soc/ti/knav_qmss_queue.c @@ -1179,7 +1179,7 @@ static int knav_queue_setup_link_ram(struct knav_device *kdev) block++; if (!block->size) - return 0; + continue; dev_dbg(kdev->dev, "linkram1: phys:%x, virt:%p, size:%x\n", block->phys, block->virt, block->size); @@ -1519,9 +1519,9 @@ static int knav_queue_load_pdsp(struct knav_device *kdev, for (i = 0; i < ARRAY_SIZE(knav_acc_firmwares); i++) { if (knav_acc_firmwares[i]) { - ret = request_firmware(&fw, - knav_acc_firmwares[i], - kdev->dev); + ret = request_firmware_direct(&fw, + knav_acc_firmwares[i], + kdev->dev); if (!ret) { found = true; break; diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h index 80af3cd35ae4..72ce932c69b2 100644 --- a/include/linux/scpi_protocol.h +++ b/include/linux/scpi_protocol.h @@ -71,7 +71,7 @@ struct scpi_ops { int (*sensor_get_value)(u16, u32 *); }; -#if IS_ENABLED(CONFIG_ARM_SCPI_PROTOCOL) +#if IS_REACHABLE(CONFIG_ARM_SCPI_PROTOCOL) struct scpi_ops *get_scpi_ops(void); #else static inline struct scpi_ops *get_scpi_ops(void) { return NULL; } |