diff options
| -rw-r--r-- | Documentation/arm64/booting.txt | 152 | ||||
| -rw-r--r-- | arch/arm64/include/asm/setup.h | 26 | ||||
| -rw-r--r-- | arch/arm64/kernel/head.S | 510 | ||||
| -rw-r--r-- | arch/arm64/kernel/setup.c | 347 |
4 files changed, 1035 insertions, 0 deletions
diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt new file mode 100644 index 000000000000..9c4d388daddc --- /dev/null +++ b/Documentation/arm64/booting.txt @@ -0,0 +1,152 @@ + Booting AArch64 Linux + ===================== + +Author: Will Deacon <will.deacon@arm.com> +Date : 07 September 2012 + +This document is based on the ARM booting document by Russell King and +is relevant to all public releases of the AArch64 Linux kernel. + +The AArch64 exception model is made up of a number of exception levels +(EL0 - EL3), with EL0 and EL1 having a secure and a non-secure +counterpart. EL2 is the hypervisor level and exists only in non-secure +mode. EL3 is the highest priority level and exists only in secure mode. + +For the purposes of this document, we will use the term `boot loader' +simply to define all software that executes on the CPU(s) before control +is passed to the Linux kernel. This may include secure monitor and +hypervisor code, or it may just be a handful of instructions for +preparing a minimal boot environment. + +Essentially, the boot loader should provide (as a minimum) the +following: + +1. Setup and initialise the RAM +2. Setup the device tree +3. Decompress the kernel image +4. Call the kernel image + + +1. Setup and initialise RAM +--------------------------- + +Requirement: MANDATORY + +The boot loader is expected to find and initialise all RAM that the +kernel will use for volatile data storage in the system. It performs +this in a machine dependent manner. (It may use internal algorithms +to automatically locate and size all RAM, or it may use knowledge of +the RAM in the machine, or any other method the boot loader designer +sees fit.) + + +2. Setup the device tree +------------------------- + +Requirement: MANDATORY + +The device tree blob (dtb) must be no bigger than 2 megabytes in size +and placed at a 2-megabyte boundary within the first 512 megabytes from +the start of the kernel image. This is to allow the kernel to map the +blob using a single section mapping in the initial page tables. + + +3. Decompress the kernel image +------------------------------ + +Requirement: OPTIONAL + +The AArch64 kernel does not currently provide a decompressor and +therefore requires decompression (gzip etc.) to be performed by the boot +loader if a compressed Image target (e.g. Image.gz) is used. For +bootloaders that do not implement this requirement, the uncompressed +Image target is available instead. + + +4. Call the kernel image +------------------------ + +Requirement: MANDATORY + +The decompressed kernel image contains a 32-byte header as follows: + + u32 magic = 0x14000008; /* branch to stext, little-endian */ + u32 res0 = 0; /* reserved */ + u64 text_offset; /* Image load offset */ + u64 res1 = 0; /* reserved */ + u64 res2 = 0; /* reserved */ + +The image must be placed at the specified offset (currently 0x80000) +from the start of the system RAM and called there. The start of the +system RAM must be aligned to 2MB. + +Before jumping into the kernel, the following conditions must be met: + +- Quiesce all DMA capable devices so that memory does not get + corrupted by bogus network packets or disk data. This will save + you many hours of debug. + +- Primary CPU general-purpose register settings + x0 = physical address of device tree blob (dtb) in system RAM. + x1 = 0 (reserved for future use) + x2 = 0 (reserved for future use) + x3 = 0 (reserved for future use) + +- CPU mode + All forms of interrupts must be masked in PSTATE.DAIF (Debug, SError, + IRQ and FIQ). + The CPU must be in either EL2 (RECOMMENDED in order to have access to + the virtualisation extensions) or non-secure EL1. + +- Caches, MMUs + The MMU must be off. + Instruction cache may be on or off. + Data cache must be off and invalidated. + External caches (if present) must be configured and disabled. + +- Architected timers + CNTFRQ must be programmed with the timer frequency. + If entering the kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0) + set where available. + +- Coherency + All CPUs to be booted by the kernel must be part of the same coherency + domain on entry to the kernel. This may require IMPLEMENTATION DEFINED + initialisation to enable the receiving of maintenance operations on + each CPU. + +- System registers + All writable architected system registers at the exception level where + the kernel image will be entered must be initialised by software at a + higher exception level to prevent execution in an UNKNOWN state. + +The boot loader is expected to enter the kernel on each CPU in the +following manner: + +- The primary CPU must jump directly to the first instruction of the + kernel image. The device tree blob passed by this CPU must contain + for each CPU node: + + 1. An 'enable-method' property. Currently, the only supported value + for this field is the string "spin-table". + + 2. A 'cpu-release-addr' property identifying a 64-bit, + zero-initialised memory location. + + It is expected that the bootloader will generate these device tree + properties and insert them into the blob prior to kernel entry. + +- Any secondary CPUs must spin outside of the kernel in a reserved area + of memory (communicated to the kernel by a /memreserve/ region in the + device tree) polling their cpu-release-addr location, which must be + contained in the reserved region. A wfe instruction may be inserted + to reduce the overhead of the busy-loop and a sev will be issued by + the primary CPU. When a read of the location pointed to by the + cpu-release-addr returns a non-zero value, the CPU must jump directly + to this value. + +- Secondary CPU general-purpose register settings + x0 = 0 (reserved for future use) + x1 = 0 (reserved for future use) + x2 = 0 (reserved for future use) + x3 = 0 (reserved for future use) diff --git a/arch/arm64/include/asm/setup.h b/arch/arm64/include/asm/setup.h new file mode 100644 index 000000000000..9cf2e46fbbdf --- /dev/null +++ b/arch/arm64/include/asm/setup.h @@ -0,0 +1,26 @@ +/* + * Based on arch/arm/include/asm/setup.h + * + * Copyright (C) 1997-1999 Russell King + * Copyright (C) 2012 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __ASM_SETUP_H +#define __ASM_SETUP_H + +#include <linux/types.h> + +#define COMMAND_LINE_SIZE 2048 + +#endif diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S new file mode 100644 index 000000000000..a2f02b63eae9 --- /dev/null +++ b/arch/arm64/kernel/head.S @@ -0,0 +1,510 @@ +/* + * Low-level CPU initialisation + * Based on arch/arm/kernel/head.S + * + * Copyright (C) 1994-2002 Russell King + * Copyright (C) 2003-2012 ARM Ltd. + * Authors: Catalin Marinas <catalin.marinas@arm.com> + * Will Deacon <will.deacon@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + +#include <asm/assembler.h> +#include <asm/ptrace.h> +#include <asm/asm-offsets.h> +#include <asm/memory.h> +#include <asm/thread_info.h> +#include <asm/pgtable-hwdef.h> +#include <asm/pgtable.h> +#include <asm/page.h> + +/* + * swapper_pg_dir is the virtual address of the initial page table. We place + * the page tables 3 * PAGE_SIZE below KERNEL_RAM_VADDR. The idmap_pg_dir has + * 2 pages and is placed below swapper_pg_dir. + */ +#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET) + +#if (KERNEL_RAM_VADDR & 0xfffff) != 0x80000 +#error KERNEL_RAM_VADDR must start at 0xXXX80000 +#endif + +#define SWAPPER_DIR_SIZE (3 * PAGE_SIZE) +#define IDMAP_DIR_SIZE (2 * PAGE_SIZE) + + .globl swapper_pg_dir + .equ swapper_pg_dir, KERNEL_RAM_VADDR - SWAPPER_DIR_SIZE + + .globl idmap_pg_dir + .equ idmap_pg_dir, swapper_pg_dir - IDMAP_DIR_SIZE + + .macro pgtbl, ttb0, ttb1, phys + add \ttb1, \phys, #TEXT_OFFSET - SWAPPER_DIR_SIZE + sub \ttb0, \ttb1, #IDMAP_DIR_SIZE + .endm + +#ifdef CONFIG_ARM64_64K_PAGES +#define BLOCK_SHIFT PAGE_SHIFT +#define BLOCK_SIZE PAGE_SIZE +#else +#define BLOCK_SHIFT SECTION_SHIFT +#define BLOCK_SIZE SECTION_SIZE +#endif + +#define KERNEL_START KERNEL_RAM_VADDR +#define KERNEL_END _end + +/* + * Initial memory map attributes. + */ +#ifndef CONFIG_SMP +#define PTE_FLAGS PTE_TYPE_PAGE | PTE_AF +#define PMD_FLAGS PMD_TYPE_SECT | PMD_SECT_AF +#else +#define PTE_FLAGS PTE_TYPE_PAGE | PTE_AF | PTE_SHARED +#define PMD_FLAGS PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S +#endif + +#ifdef CONFIG_ARM64_64K_PAGES +#define MM_MMUFLAGS PTE_ATTRINDX(MT_NORMAL) | PTE_FLAGS +#define IO_MMUFLAGS PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_XN | PTE_FLAGS +#else +#define MM_MMUFLAGS PMD_ATTRINDX(MT_NORMAL) | PMD_FLAGS +#define IO_MMUFLAGS PMD_ATTRINDX(MT_DEVICE_nGnRE) | PMD_SECT_XN | PMD_FLAGS +#endif + +/* + * Kernel startup entry point. + * --------------------------- + * + * The requirements are: + * MMU = off, D-cache = off, I-cache = on or off, + * x0 = physical address to the FDT blob. + * + * This code is mostly position independent so you call this at + * __pa(PAGE_OFFSET + TEXT_OFFSET). + * + * Note that the callee-saved registers are used for storing variables + * that are useful before the MMU is enabled. The allocations are described + * in the entry routines. + */ + __HEAD + + /* + * DO NOT MODIFY. Image header expected by Linux boot-loaders. + */ + b stext // branch to kernel start, magic + .long 0 // reserved + .quad TEXT_OFFSET // Image load offset from start of RAM + .quad 0 // reserved + .quad 0 // reserved + +ENTRY(stext) + mov x21, x0 // x21=FDT + bl el2_setup // Drop to EL1 + mrs x22, midr_el1 // x22=cpuid + mov x0, x22 + bl lookup_processor_type + mov x23, x0 // x23=current cpu_table + cbz x23, __error_p // invalid processor (x23=0)? + bl __calc_phys_offset // x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET + bl __vet_fdt + bl __create_page_tables // x25=TTBR0, x26=TTBR1 + /* + * The following calls CPU specific code in a position independent + * manner. See arch/arm64/mm/proc.S for details. x23 = base of + * cpu_info structure selected by lookup_processor_type above. + * On return, the CPU will be ready for the MMU to be turned on and + * the TCR will have been set. + */ + ldr x27, __switch_data // address to jump to after + // MMU has been enabled + adr lr, __enable_mmu // return (PIC) address + ldr x12, [x23, #CPU_INFO_SETUP] + add x12, x12, x28 // __virt_to_phys + br x12 // initialise processor +ENDPROC(stext) + +/* + * If we're fortunate enough to boot at EL2, ensure that the world is + * sane before dropping to EL1. + */ +ENTRY(el2_setup) + mrs x0, CurrentEL + cmp x0, #PSR_MODE_EL2t + ccmp x0, #PSR_MODE_EL2h, #0x4, ne + b.eq 1f + ret + + /* Hyp configuration. */ +1: mov x0, #(1 << 31) // 64-bit EL1 + msr hcr_el2, x0 + + /* Generic timers. */ + mrs x0, cnthctl_el2 + orr x0, x0, #3 // Enable EL1 physical timers + msr cnthctl_el2, x0 + + /* Populate ID registers. */ + mrs x0, midr_el1 + mrs x1, mpidr_el1 + msr vpidr_el2, x0 + msr vmpidr_el2, x1 + + /* sctlr_el1 */ + mov x0, #0x0800 // Set/clear RES{1,0} bits + movk x0, #0x30d0, lsl #16 + msr sctlr_el1, x0 + + /* Coprocessor traps. */ + mov x0, #0x33ff + msr cptr_el2, x0 // Disable copro. traps to EL2 + +#ifdef CONFIG_COMPAT + msr hstr_el2, xzr // Disable CP15 traps to EL2 +#endif + + /* spsr */ + mov x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\ + PSR_MODE_EL1h) + msr spsr_el2, x0 + msr elr_el2, lr + eret +ENDPROC(el2_setup) + + .align 3 +2: .quad . + .quad PAGE_OFFSET + +#ifdef CONFIG_SMP + .pushsection .smp.pen.text, "ax" + .align 3 +1: .quad . + .quad secondary_holding_pen_release + + /* + * This provides a "holding pen" for platforms to hold all secondary + * cores are held until we're ready for them to initialise. + */ +ENTRY(secondary_holding_pen) + bl el2_setup // Drop to EL1 + mrs x0, mpidr_el1 + and x0, x0, #15 // CPU number + adr x1, 1b + ldp x2, x3, [x1] + sub x1, x1, x2 + add x3, x3, x1 +pen: ldr x4, [x3] + cmp x4, x0 + b.eq secondary_startup + wfe + b pen +ENDPROC(secondary_holding_pen) + .popsection + +ENTRY(secondary_startup) + /* + * Common entry point for secondary CPUs. + */ + mrs x22, midr_el1 // x22=cpuid + mov x0, x22 + bl lookup_processor_type + mov x23, x0 // x23=current cpu_table + cbz x23, __error_p // invalid processor (x23=0)? + + bl __calc_phys_offset // x24=phys offset + pgtbl x25, x26, x24 // x25=TTBR0, x26=TTBR1 + ldr x12, [x23, #CPU_INFO_SETUP] + add x12, x12, x28 // __virt_to_phys + blr x12 // initialise processor + + ldr x21, =secondary_data + ldr x27, =__secondary_switched // address to jump to after enabling the MMU + b __enable_mmu +ENDPROC(secondary_startup) + +ENTRY(__secondary_switched) + ldr x0, [x21] // get secondary_data.stack + mov sp, x0 + mov x29, #0 + b secondary_start_kernel +ENDPROC(__secondary_switched) +#endif /* CONFIG_SMP */ + +/* + * Setup common bits before finally enabling the MMU. Essentially this is just + * loading the page table pointer and vector base registers. + * + * On entry to this code, x0 must contain the SCTLR_EL1 value for turning on + * the MMU. + */ +__enable_mmu: + ldr x5, =vectors + msr vbar_el1, x5 + msr ttbr0_el1, x25 // load TTBR0 + msr ttbr1_el1, x26 // load TTBR1 + isb + b __turn_mmu_on +ENDPROC(__enable_mmu) + +/* + * Enable the MMU. This completely changes the structure of the visible memory + * space. You will not be able to trace execution through this. + * + * x0 = system control register + * x27 = *virtual* address to jump to upon completion + * + * other registers depend on the function called upon completion + */ + .align 6 +__turn_mmu_on: + msr sctlr_el1, x0 + isb + br x27 +ENDPROC(__turn_mmu_on) + +/* + * Calculate the start of physical memory. + */ +__calc_phys_offset: + adr x0, 1f + ldp x1, x2, [x0] + sub x28, x0, x1 // x28 = PHYS_OFFSET - PAGE_OFFSET + add x24, x2, x28 // x24 = PHYS_OFFSET + ret +ENDPROC(__calc_phys_offset) + + .align 3 +1: .quad . + .quad PAGE_OFFSET + +/* + * Macro to populate the PGD for the corresponding block entry in the next + * level (tbl) for the given virtual address. + * + * Preserves: pgd, tbl, virt + * Corrupts: tmp1, tmp2 + */ + .macro create_pgd_entry, pgd, tbl, virt, tmp1, tmp2 + lsr \tmp1, \virt, #PGDIR_SHIFT + and \tmp1, \tmp1, #PTRS_PER_PGD - 1 // PGD index + orr \tmp2, \tbl, #3 // PGD entry table type + str \tmp2, [\pgd, \tmp1, lsl #3] + .endm + +/* + * Macro to populate block entries in the page table for the start..end + * virtual range (inclusive). + * + * Preserves: tbl, flags + * Corrupts: phys, start, end, pstate + */ + .macro create_block_map, tbl, flags, phys, start, end, idmap=0 + lsr \phys, \phys, #BLOCK_SHIFT + .if \idmap + and \start, \phys, #PTRS_PER_PTE - 1 // table index + .else + lsr \start, \start, #BLOCK_SHIFT + and \start, \start, #PTRS_PER_PTE - 1 // table index + .endif + orr \phys, \flags, \phys, lsl #BLOCK_SHIFT // table entry + .ifnc \start,\end + lsr \end, \end, #BLOCK_SHIFT + and \end, \end, #PTRS_PER_PTE - 1 // table end index + .endif +9999: str \phys, [\tbl, \start, lsl #3] // store the entry + .ifnc \start,\end + add \start, \start, #1 // next entry + add \phys, \phys, #BLOCK_SIZE // next block + cmp \start, \end + b.ls 9999b + .endif + .endm + +/* + * Setup the initial page tables. We only setup the barest amount which is + * required to get the kernel running. The following sections are required: + * - identity mapping to enable the MMU (low address, TTBR0) + * - first few MB of the kernel linear mapping to jump to once the MMU has + * been enabled, including the FDT blob (TTBR1) + */ +__create_page_tables: + pgtbl x25, x26, x24 // idmap_pg_dir and swapper_pg_dir addresses + + /* + * Clear the idmap and swapper page tables. + */ + mov x0, x25 + add x6, x26, #SWAPPER_DIR_SIZE +1: stp xzr, xzr, [x0], #16 + stp xzr, xzr, [x0], #16 + stp xzr, xzr, [x0], #16 + stp xzr, xzr, [x0], #16 + cmp x0, x6 + b.lo 1b + + ldr x7, =MM_MMUFLAGS + + /* + * Create the identity mapping. + */ + add x0, x25, #PAGE_SIZE // section table address + adr x3, __turn_mmu_on // virtual/physical address + create_pgd_entry x25, x0, x3, x5, x6 + create_block_map x0, x7, x3, x5, x5, idmap=1 + + /* + * Map the kernel image (starting with PHYS_OFFSET). + */ + add x0, x26, #PAGE_SIZE // section table address + mov x5, #PAGE_OFFSET + create_pgd_entry x26, x0, x5, x3, x6 + ldr x6, =KERNEL_END - 1 + mov x3, x24 // phys offset + create_block_map x0, x7, x3, x5, x6 + + /* + * Map the FDT blob (maximum 2MB; must be within 512MB of + * PHYS_OFFSET). + */ + mov x3, x21 // FDT phys address + and x3, x3, #~((1 << 21) - 1) // 2MB aligned + mov x6, #PAGE_OFFSET + sub x5, x3, x24 // subtract PHYS_OFFSET + tst x5, #~((1 << 29) - 1) // within 512MB? + csel x21, xzr, x21, ne // zero the FDT pointer + b.ne 1f + add x5, x5, x6 // __va(FDT blob) + add x6, x5, #1 << 21 // 2MB for the FDT blob + sub x6, x6, #1 // inclusive range + create_block_map x0, x7, x3, x5, x6 +1: + ret +ENDPROC(__create_page_tables) + .ltorg + + .align 3 + .type __switch_data, %object +__switch_data: + .quad __mmap_switched + .quad __data_loc // x4 + .quad _data // x5 + .quad __bss_start // x6 + .quad _end // x7 + .quad processor_id // x4 + .quad __fdt_pointer // x5 + .quad memstart_addr // x6 + .quad init_thread_union + THREAD_START_SP // sp + +/* + * The following fragment of code is executed with the MMU on in MMU mode, and + * uses absolute addresses; this is not position independent. + */ +__mmap_switched: + adr x3, __switch_data + 8 + + ldp x4, x5, [x3], #16 + ldp x6, x7, [x3], #16 + cmp x4, x5 // Copy data segment if needed +1: ccmp x5, x6, #4, ne + b.eq 2f + ldr x16, [x4], #8 + str x16, [x5], #8 + b 1b +2: +1: cmp x6, x7 + b.hs 2f + str xzr, [x6], #8 // Clear BSS + b 1b +2: + ldp x4, x5, [x3], #16 + ldr x6, [x3], #8 + ldr x16, [x3] + mov sp, x16 + str x22, [x4] // Save processor ID + str x21, [x5] // Save FDT pointer + str x24, [x6] // Save PHYS_OFFSET + mov x29, #0 + b start_kernel +ENDPROC(__mmap_switched) + +/* + * Exception handling. Something went wrong and we can't proceed. We ought to + * tell the user, but since we don't have any guarantee that we're even + * running on the right architecture, we do virtually nothing. + */ +__error_p: +ENDPROC(__error_p) + +__error: +1: nop + b 1b +ENDPROC(__error) + +/* + * This function gets the processor ID in w0 and searches the cpu_table[] for + * a match. It returns a pointer to the struct cpu_info it found. The + * cpu_table[] must end with an empty (all zeros) structure. + * + * This routine can be called via C code and it needs to work with the MMU + * both disabled and enabled (the offset is calculated automatically). + */ +ENTRY(lookup_processor_type) + adr x1, __lookup_processor_type_data + ldp x2, x3, [x1] + sub x1, x1, x2 // get offset between VA and PA + add x3, x3, x1 // convert VA to PA +1: + ldp w5, w6, [x3] // load cpu_id_val and cpu_id_mask + cbz w5, 2f // end of list? + and w6, w6, w0 + cmp w5, w6 + b.eq 3f + add x3, x3, #CPU_INFO_SZ + b 1b +2: + mov x3, #0 // unknown processor +3: + mov x0, x3 + ret +ENDPROC(lookup_processor_type) + + .align 3 + .type __lookup_processor_type_data, %object +__lookup_processor_type_data: + .quad . + .quad cpu_table + .size __lookup_processor_type_data, . - __lookup_processor_type_data + +/* + * Determine validity of the x21 FDT pointer. + * The dtb must be 8-byte aligned and live in the first 512M of memory. + */ +__vet_fdt: + tst x21, #0x7 + b.ne 1f + cmp x21, x24 + b.lt 1f + mov x0, #(1 << 29) + add x0, x0, x24 + cmp x21, x0 + b.ge 1f + ret +1: + mov x21, #0 + ret +ENDPROC(__vet_fdt) diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c new file mode 100644 index 000000000000..48ffb9fb3fe3 --- /dev/null +++ b/arch/arm64/kernel/setup.c @@ -0,0 +1,347 @@ +/* + * Based on arch/arm/kernel/setup.c + * + * Copyright (C) 1995-2001 Russell King + * Copyright (C) 2012 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/utsname.h> +#include <linux/initrd.h> +#include <linux/console.h> +#include <linux/bootmem.h> +#include <linux/seq_file.h> +#include <linux/screen_info.h> +#include <linux/init.h> +#include <linux/kexec.h> +#include <linux/crash_dump.h> +#include <linux/root_dev.h> +#include <linux/cpu.h> +#include <linux/interrupt.h> +#include <linux/smp.h> +#include <linux/fs.h> +#include <linux/proc_fs.h> +#include <linux/memblock.h> +#include <linux/of_fdt.h> + +#include <asm/cputype.h> +#include <asm/elf.h> +#include <asm/cputable.h> +#include <asm/sections.h> +#include <asm/setup.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <asm/traps.h> +#include <asm/memblock.h> + +unsigned int processor_id; +EXPORT_SYMBOL(processor_id); + +unsigned int elf_hwcap __read_mostly; +EXPORT_SYMBOL_GPL(elf_hwcap); + +static const char *cpu_name; +static const char *machine_name; +phys_addr_t __fdt_pointer __initdata; + +/* + * Standard memory resources + */ +static struct resource mem_res[] = { + { + .name = "Kernel code", + .start = 0, + .end = 0, + .flags = IORESOURCE_MEM + }, + { + .name = "Kernel data", + .start = 0, + .end = 0, + .flags = IORESOURCE_MEM + } +}; + +#define kernel_code mem_res[0] +#define kernel_data mem_res[1] + +void __init early_print(const char *str, ...) +{ + char buf[256]; + va_list ap; + + va_start(ap, str); + vsnprintf(buf, sizeof(buf), str, ap); + va_end(ap); + + printk("%s", buf); +} + +static void __init setup_processor(void) +{ + struct cpu_info *cpu_info; + + /* + * locate processor in the list of supported processor + * types. The linker builds this table for us from the + * entries in arch/arm/mm/proc.S + */ + cpu_info = lookup_processor_type(read_cpuid_id()); + if (!cpu_info) { + printk("CPU configuration botched (ID %08x), unable to continue.\n", + read_cpuid_id()); + while (1); + } + + cpu_name = cpu_info->cpu_name; + + printk("CPU: %s [%08x] revision %d\n", + cpu_name, read_cpuid_id(), read_cpuid_id() & 15); + + sprintf(init_utsname()->machine, "aarch64"); + elf_hwcap = 0; +} + +static void __init setup_machine_fdt(phys_addr_t dt_phys) +{ + struct boot_param_header *devtree; + unsigned long dt_root; + + /* Check we have a non-NULL DT pointer */ + if (!dt_phys) { + early_print("\n" + "Error: NULL or invalid device tree blob\n" + "The dtb must be 8-byte aligned and passed in the first 512MB of memory\n" + "\nPlease check your bootloader.\n"); + + while (true) + cpu_relax(); + + } + + devtree = phys_to_virt(dt_phys); + + /* Check device tree validity */ + if (be32_to_cpu(devtree->magic) != OF_DT_HEADER) { + early_print("\n" + "Error: invalid device tree blob at physical address 0x%p (virtual address 0x%p)\n" + "Expected 0x%x, found 0x%x\n" + "\nPlease check your bootloader.\n", + dt_phys, devtree, OF_DT_HEADER, + be32_to_cpu(devtree->magic)); + + while (true) + cpu_relax(); + } + + initial_boot_params = devtree; + dt_root = of_get_flat_dt_root(); + + machine_name = of_get_flat_dt_prop(dt_root, "model", NULL); + if (!machine_name) + machine_name = of_get_flat_dt_prop(dt_root, "compatible", NULL); + if (!machine_name) + machine_name = "<unknown>"; + pr_info("Machine: %s\n", machine_name); + + /* Retrieve various information from the /chosen node */ + of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line); + /* Initialize {size,address}-cells info */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + /* Setup memory, calling early_init_dt_add_memory_arch */ + of_scan_flat_dt(early_init_dt_scan_memory, NULL); +} + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + size &= PAGE_MASK; + memblock_add(base, size); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return __va(memblock_alloc(size, align)); +} + +/* + * Limit the memory size that was specified via FDT. + */ +static int __init early_mem(char *p) +{ + phys_addr_t limit; + + if (!p) + return 1; + + limit = memparse(p, &p) & PAGE_MASK; + pr_notice("Memory limited to %lldMB\n", limit >> 20); + + memblock_enforce_memory_limit(limit); + + return 0; +} +early_param("mem", early_mem); + +static void __init request_standard_resources(void) +{ + struct memblock_region *region; + struct resource *res; + + kernel_code.start = virt_to_phys(_text); + kernel_code.end = virt_to_phys(_etext - 1); + kernel_data.start = virt_to_phys(_sdata); + kernel_data.end = virt_to_phys(_end - 1); + + for_each_memblock(memory, region) { + res = alloc_bootmem_low(sizeof(*res)); + res->name = "System RAM"; + res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); + res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + + request_resource(&iomem_resource, res); + + if (kernel_code.start >= res->start && + kernel_code.end <= res->end) + request_resource(res, &kernel_code); + if (kernel_data.start >= res->start && + kernel_data.end <= res->end) + request_resource(res, &kernel_data); + } +} + +void __init setup_arch(char **cmdline_p) +{ + setup_processor(); + + setup_machine_fdt(__fdt_pointer); + + init_mm.start_code = (unsigned long) _text; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; + init_mm.brk = (unsigned long) _end; + + *cmdline_p = boot_command_line; + + parse_early_param(); + + arm64_memblock_init(); + + paging_init(); + request_standard_resources(); + + unflatten_device_tree(); + +#ifdef CONFIG_SMP + smp_init_cpus(); +#endif + +#ifdef CONFIG_VT +#if defined(CONFIG_VGA_CONSOLE) + conswitchp = &vga_con; +#elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +#endif +} + +static DEFINE_PER_CPU(struct cpu, cpu_data); + +static int __init topology_init(void) +{ + int i; + + for_each_possible_cpu(i) { + struct cpu *cpu = &per_cpu(cpu_data, i); + cpu->hotpluggable = 1; + register_cpu(cpu, i); + } + + return 0; +} +subsys_initcall(topology_init); + +static const char *hwcap_str[] = { + "fp", + "asimd", + NULL +}; + +static int c_show(struct seq_file *m, void *v) +{ + int i; + + seq_printf(m, "Processor\t: %s rev %d (%s)\n", + cpu_name, read_cpuid_id() & 15, ELF_PLATFORM); + + for_each_online_cpu(i) { + /* + * glibc reads /proc/cpuinfo to determine the number of + * online processors, looking for lines beginning with + * "processor". Give glibc what it expects. + */ +#ifdef CONFIG_SMP + seq_printf(m, "processor\t: %d\n", i); +#endif + seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n", + loops_per_jiffy / (500000UL/HZ), + loops_per_jiffy / (5000UL/HZ) % 100); + } + + /* dump out the processor features */ + seq_puts(m, "Features\t: "); + + for (i = 0; hwcap_str[i]; i++) + if (elf_hwcap & (1 << i)) + seq_printf(m, "%s ", hwcap_str[i]); + + seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24); + seq_printf(m, "CPU architecture: AArch64\n"); + seq_printf(m, "CPU variant\t: 0x%x\n", (read_cpuid_id() >> 20) & 15); + seq_printf(m, "CPU part\t: 0x%03x\n", (read_cpuid_id() >> 4) & 0xfff); + seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15); + + seq_puts(m, "\n"); + + seq_printf(m, "Hardware\t: %s\n", machine_name); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < 1 ? (void *)1 : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return NULL; +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +const struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = c_show +}; |