diff options
-rw-r--r-- | drivers/mfd/wm5102-tables.c | 3 | ||||
-rw-r--r-- | drivers/regulator/arizona-ldo1.c | 130 | ||||
-rw-r--r-- | drivers/regulator/arizona-micsupp.c | 2 | ||||
-rw-r--r-- | include/linux/mfd/arizona/registers.h | 16 |
4 files changed, 148 insertions, 3 deletions
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index 01b9255ed631..b829a5710ddc 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -775,6 +775,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000154, 0x0000 }, /* R340 - Rate Estimator 3 */ { 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */ { 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */ + { 0x00000161, 0x0000 }, /* R353 - Dynamic Frequency Scaling 1 */ { 0x00000171, 0x0000 }, /* R369 - FLL1 Control 1 */ { 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */ { 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */ @@ -1564,6 +1565,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_RATE_ESTIMATOR_3: case ARIZONA_RATE_ESTIMATOR_4: case ARIZONA_RATE_ESTIMATOR_5: + case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1: case ARIZONA_FLL1_CONTROL_1: case ARIZONA_FLL1_CONTROL_2: case ARIZONA_FLL1_CONTROL_3: @@ -1596,6 +1598,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL2_GPIO_CLOCK: case ARIZONA_MIC_CHARGE_PUMP_1: case ARIZONA_LDO1_CONTROL_1: + case ARIZONA_LDO1_CONTROL_2: case ARIZONA_LDO2_CONTROL_1: case ARIZONA_MIC_BIAS_CTRL_1: case ARIZONA_MIC_BIAS_CTRL_2: diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index d184aa35abcb..739faf99b9e2 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -34,6 +34,108 @@ struct arizona_ldo1 { struct regulator_init_data init_data; }; +static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + if (selector >= rdev->desc->n_voltages) + return -EINVAL; + + if (selector == rdev->desc->n_voltages - 1) + return 1800000; + else + return rdev->desc->min_uV + (rdev->desc->uV_step * selector); +} + +static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + int sel; + + sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step); + if (sel >= rdev->desc->n_voltages) + sel = rdev->desc->n_voltages - 1; + + return sel; +} + +static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev, + unsigned sel) +{ + struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev); + struct regmap *regmap = ldo->arizona->regmap; + unsigned int val; + int ret; + + if (sel == rdev->desc->n_voltages - 1) + val = ARIZONA_LDO1_HI_PWR; + else + val = 0; + + ret = regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_2, + ARIZONA_LDO1_HI_PWR, val); + if (ret != 0) + return ret; + + ret = regmap_update_bits(regmap, ARIZONA_DYNAMIC_FREQUENCY_SCALING_1, + ARIZONA_SUBSYS_MAX_FREQ, val); + if (ret != 0) + return ret; + + if (val) + return 0; + + val = sel << ARIZONA_LDO1_VSEL_SHIFT; + + return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1, + ARIZONA_LDO1_VSEL_MASK, val); +} + +static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev) +{ + struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev); + struct regmap *regmap = ldo->arizona->regmap; + unsigned int val; + int ret; + + ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_2, &val); + if (ret != 0) + return ret; + + if (val & ARIZONA_LDO1_HI_PWR) + return rdev->desc->n_voltages - 1; + + ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val); + if (ret != 0) + return ret; + + return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT; +} + +static struct regulator_ops arizona_ldo1_hc_ops = { + .list_voltage = arizona_ldo1_hc_list_voltage, + .map_voltage = arizona_ldo1_hc_map_voltage, + .get_voltage_sel = arizona_ldo1_hc_get_voltage_sel, + .set_voltage_sel = arizona_ldo1_hc_set_voltage_sel, + .get_bypass = regulator_get_bypass_regmap, + .set_bypass = regulator_set_bypass_regmap, +}; + +static const struct regulator_desc arizona_ldo1_hc = { + .name = "LDO1", + .supply_name = "LDOVDD", + .type = REGULATOR_VOLTAGE, + .ops = &arizona_ldo1_hc_ops, + + .bypass_reg = ARIZONA_LDO1_CONTROL_1, + .bypass_mask = ARIZONA_LDO1_BYPASS, + .min_uV = 900000, + .uV_step = 50000, + .n_voltages = 8, + .enable_time = 500, + + .owner = THIS_MODULE, +}; + static struct regulator_ops arizona_ldo1_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, @@ -55,11 +157,22 @@ static const struct regulator_desc arizona_ldo1 = { .bypass_mask = ARIZONA_LDO1_BYPASS, .min_uV = 900000, .uV_step = 50000, - .n_voltages = 6, + .n_voltages = 7, + .enable_time = 500, .owner = THIS_MODULE, }; +static const struct regulator_init_data arizona_ldo1_dvfs = { + .constraints = { + .min_uV = 1200000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = 1, +}; + static const struct regulator_init_data arizona_ldo1_default = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -70,6 +183,7 @@ static const struct regulator_init_data arizona_ldo1_default = { static __devinit int arizona_ldo1_probe(struct platform_device *pdev) { struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); + const struct regulator_desc *desc; struct regulator_config config = { }; struct arizona_ldo1 *ldo1; int ret; @@ -87,7 +201,17 @@ static __devinit int arizona_ldo1_probe(struct platform_device *pdev) * default init_data for it. This will be overridden with * platform data if provided. */ - ldo1->init_data = arizona_ldo1_default; + switch (arizona->type) { + case WM5102: + desc = &arizona_ldo1_hc; + ldo1->init_data = arizona_ldo1_dvfs; + break; + default: + desc = &arizona_ldo1; + ldo1->init_data = arizona_ldo1_default; + break; + } + ldo1->init_data.consumer_supplies = &ldo1->supply; ldo1->supply.supply = "DCVDD"; ldo1->supply.dev_name = dev_name(arizona->dev); @@ -102,7 +226,7 @@ static __devinit int arizona_ldo1_probe(struct platform_device *pdev) else config.init_data = &ldo1->init_data; - ldo1->regulator = regulator_register(&arizona_ldo1, &config); + ldo1->regulator = regulator_register(desc, &config); if (IS_ERR(ldo1->regulator)) { ret = PTR_ERR(ldo1->regulator); dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n", diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index d9b1f82cc5bd..93d0604e64b4 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -101,6 +101,8 @@ static const struct regulator_desc arizona_micsupp = { .bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1, .bypass_mask = ARIZONA_CPMIC_BYPASS, + .enable_time = 3000, + .owner = THIS_MODULE, }; diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 7671a287dfee..ba26e99c388d 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -76,6 +76,7 @@ #define ARIZONA_RATE_ESTIMATOR_3 0x154 #define ARIZONA_RATE_ESTIMATOR_4 0x155 #define ARIZONA_RATE_ESTIMATOR_5 0x156 +#define ARIZONA_DYNAMIC_FREQUENCY_SCALING_1 0x161 #define ARIZONA_FLL1_CONTROL_1 0x171 #define ARIZONA_FLL1_CONTROL_2 0x172 #define ARIZONA_FLL1_CONTROL_3 0x173 @@ -110,6 +111,7 @@ #define ARIZONA_FLL2_GPIO_CLOCK 0x1AA #define ARIZONA_MIC_CHARGE_PUMP_1 0x200 #define ARIZONA_LDO1_CONTROL_1 0x210 +#define ARIZONA_LDO1_CONTROL_2 0x212 #define ARIZONA_LDO2_CONTROL_1 0x213 #define ARIZONA_MIC_BIAS_CTRL_1 0x218 #define ARIZONA_MIC_BIAS_CTRL_2 0x219 @@ -1574,6 +1576,13 @@ #define ARIZONA_SAMPLE_RATE_DETECT_D_WIDTH 5 /* SAMPLE_RATE_DETECT_D - [4:0] */ /* + * R353 (0x161) - Dynamic Frequency Scaling 1 + */ +#define ARIZONA_SUBSYS_MAX_FREQ 0x0001 /* SUBSYS_MAX_FREQ */ +#define ARIZONA_SUBSYS_MAX_FREQ_SHIFT 0 /* SUBSYS_MAX_FREQ */ +#define ARIZONA_SUBSYS_MAX_FREQ_WIDTH 1 /* SUBSYS_MAX_FREQ */ + +/* * R369 (0x171) - FLL1 Control 1 */ #define ARIZONA_FLL1_FREERUN 0x0002 /* FLL1_FREERUN */ @@ -1889,6 +1898,13 @@ #define ARIZONA_LDO1_ENA_WIDTH 1 /* LDO1_ENA */ /* + * R530 (0x212) - LDO1 Control 2 + */ +#define ARIZONA_LDO1_HI_PWR 0x0001 /* LDO1_HI_PWR */ +#define ARIZONA_LDO1_HI_PWR_SHIFT 0 /* LDO1_HI_PWR */ +#define ARIZONA_LDO1_HI_PWR_WIDTH 1 /* LDO1_HI_PWR */ + +/* * R531 (0x213) - LDO2 Control 1 */ #define ARIZONA_LDO2_VSEL_MASK 0x07E0 /* LDO2_VSEL - [10:5] */ |