diff options
| -rw-r--r-- | drivers/net/ipa/ipa.h | 20 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_clock.c | 148 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_clock.h | 20 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_data-v3.1.c | 4 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_data-v3.5.1.c | 4 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_data-v4.11.c | 4 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_data-v4.2.c | 4 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_data-v4.5.c | 4 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_data-v4.9.c | 4 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_data.h | 10 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_endpoint.c | 2 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_main.c | 32 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_modem.c | 2 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_smp2p.c | 58 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_smp2p.h | 2 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_uc.c | 16 | ||||
| -rw-r--r-- | drivers/net/ipa/ipa_uc.h | 10 |
17 files changed, 171 insertions, 173 deletions
diff --git a/drivers/net/ipa/ipa.h b/drivers/net/ipa/ipa.h index 34152fe02963..9fc880eb7e3a 100644 --- a/drivers/net/ipa/ipa.h +++ b/drivers/net/ipa/ipa.h @@ -23,7 +23,7 @@ struct icc_path; struct net_device; struct platform_device; -struct ipa_clock; +struct ipa_power; struct ipa_smp2p; struct ipa_interrupt; @@ -36,11 +36,11 @@ struct ipa_interrupt; * @nb: Notifier block used for remoteproc SSR * @notifier: Remoteproc SSR notifier * @smp2p: SMP2P information - * @clock: IPA clocking information + * @power: IPA power information * @table_addr: DMA address of filter/route table content * @table_virt: Virtual address of filter/route table content * @interrupt: IPA Interrupt information - * @uc_clocked: true if clock is active by proxy for microcontroller + * @uc_powered: true if power is active by proxy for microcontroller * @uc_loaded: true after microcontroller has reported it's ready * @reg_addr: DMA address used for IPA register access * @reg_virt: Virtual address used for IPA register access @@ -78,13 +78,13 @@ struct ipa { struct notifier_block nb; void *notifier; struct ipa_smp2p *smp2p; - struct ipa_clock *clock; + struct ipa_power *power; dma_addr_t table_addr; __le64 *table_virt; struct ipa_interrupt *interrupt; - bool uc_clocked; + bool uc_powered; bool uc_loaded; dma_addr_t reg_addr; @@ -134,11 +134,11 @@ struct ipa { * * Activities performed at the init stage can be done without requiring * any access to IPA hardware. Activities performed at the config stage - * require the IPA clock to be running, because they involve access - * to IPA registers. The setup stage is performed only after the GSI - * hardware is ready (more on this below). The setup stage allows - * the AP to perform more complex initialization by issuing "immediate - * commands" using a special interface to the IPA. + * require IPA power, because they involve access to IPA registers. + * The setup stage is performed only after the GSI hardware is ready + * (more on this below). The setup stage allows the AP to perform + * more complex initialization by issuing "immediate commands" using + * a special interface to the IPA. * * This function, @ipa_setup(), starts the setup stage. * diff --git a/drivers/net/ipa/ipa_clock.c b/drivers/net/ipa/ipa_clock.c index 54d684945a7f..3ebc44ea7f3c 100644 --- a/drivers/net/ipa/ipa_clock.c +++ b/drivers/net/ipa/ipa_clock.c @@ -18,18 +18,16 @@ #include "ipa_data.h" /** - * DOC: IPA Clocking + * DOC: IPA Power Management * - * The "IPA Clock" manages both the IPA core clock and the interconnects - * (buses) the IPA depends on as a single logical entity. A reference count - * is incremented by "get" operations and decremented by "put" operations. - * Transitions of that count from 0 to 1 result in the clock and interconnects - * being enabled, and transitions of the count from 1 to 0 cause them to be - * disabled. We currently operate the core clock at a fixed clock rate, and - * all buses at a fixed average and peak bandwidth. As more advanced IPA - * features are enabled, we can make better use of clock and bus scaling. + * The IPA hardware is enabled when the IPA core clock and all the + * interconnects (buses) it depends on are enabled. Runtime power + * management is used to determine whether the core clock and + * interconnects are enabled, and if not in use to be suspended + * automatically. * - * An IPA clock reference must be held for any access to IPA hardware. + * The core clock currently runs at a fixed clock rate when enabled, + * an all interconnects use a fixed average and peak bandwidth. */ #define IPA_AUTOSUSPEND_DELAY 500 /* milliseconds */ @@ -63,7 +61,7 @@ enum ipa_power_flag { }; /** - * struct ipa_clock - IPA clocking information + * struct ipa_power - IPA power management information * @dev: IPA device pointer * @core: IPA core clock * @spinlock: Protects modem TX queue enable/disable @@ -71,7 +69,7 @@ enum ipa_power_flag { * @interconnect_count: Number of elements in interconnect[] * @interconnect: Interconnect array */ -struct ipa_clock { +struct ipa_power { struct device *dev; struct clk *core; spinlock_t spinlock; /* used with STOPPED/STARTED power flags */ @@ -110,18 +108,18 @@ static void ipa_interconnect_exit_one(struct ipa_interconnect *interconnect) } /* Initialize interconnects required for IPA operation */ -static int ipa_interconnect_init(struct ipa_clock *clock, struct device *dev, +static int ipa_interconnect_init(struct ipa_power *power, struct device *dev, const struct ipa_interconnect_data *data) { struct ipa_interconnect *interconnect; u32 count; int ret; - count = clock->interconnect_count; + count = power->interconnect_count; interconnect = kcalloc(count, sizeof(*interconnect), GFP_KERNEL); if (!interconnect) return -ENOMEM; - clock->interconnect = interconnect; + power->interconnect = interconnect; while (count--) { ret = ipa_interconnect_init_one(dev, interconnect, data++); @@ -133,36 +131,36 @@ static int ipa_interconnect_init(struct ipa_clock *clock, struct device *dev, return 0; out_unwind: - while (interconnect-- > clock->interconnect) + while (interconnect-- > power->interconnect) ipa_interconnect_exit_one(interconnect); - kfree(clock->interconnect); - clock->interconnect = NULL; + kfree(power->interconnect); + power->interconnect = NULL; return ret; } /* Inverse of ipa_interconnect_init() */ -static void ipa_interconnect_exit(struct ipa_clock *clock) +static void ipa_interconnect_exit(struct ipa_power *power) { struct ipa_interconnect *interconnect; - interconnect = clock->interconnect + clock->interconnect_count; - while (interconnect-- > clock->interconnect) + interconnect = power->interconnect + power->interconnect_count; + while (interconnect-- > power->interconnect) ipa_interconnect_exit_one(interconnect); - kfree(clock->interconnect); - clock->interconnect = NULL; + kfree(power->interconnect); + power->interconnect = NULL; } /* Currently we only use one bandwidth level, so just "enable" interconnects */ static int ipa_interconnect_enable(struct ipa *ipa) { struct ipa_interconnect *interconnect; - struct ipa_clock *clock = ipa->clock; + struct ipa_power *power = ipa->power; int ret; u32 i; - interconnect = clock->interconnect; - for (i = 0; i < clock->interconnect_count; i++) { + interconnect = power->interconnect; + for (i = 0; i < power->interconnect_count; i++) { ret = icc_set_bw(interconnect->path, interconnect->average_bandwidth, interconnect->peak_bandwidth); @@ -178,7 +176,7 @@ static int ipa_interconnect_enable(struct ipa *ipa) return 0; out_unwind: - while (interconnect-- > clock->interconnect) + while (interconnect-- > power->interconnect) (void)icc_set_bw(interconnect->path, 0, 0); return ret; @@ -188,14 +186,14 @@ out_unwind: static int ipa_interconnect_disable(struct ipa *ipa) { struct ipa_interconnect *interconnect; - struct ipa_clock *clock = ipa->clock; + struct ipa_power *power = ipa->power; struct device *dev = &ipa->pdev->dev; int result = 0; u32 count; int ret; - count = clock->interconnect_count; - interconnect = clock->interconnect + count; + count = power->interconnect_count; + interconnect = power->interconnect + count; while (count--) { interconnect--; ret = icc_set_bw(interconnect->path, 0, 0); @@ -211,8 +209,8 @@ static int ipa_interconnect_disable(struct ipa *ipa) return result; } -/* Turn on IPA clocks, including interconnects */ -static int ipa_clock_enable(struct ipa *ipa) +/* Enable IPA power, enabling interconnects and the core clock */ +static int ipa_power_enable(struct ipa *ipa) { int ret; @@ -220,7 +218,7 @@ static int ipa_clock_enable(struct ipa *ipa) if (ret) return ret; - ret = clk_prepare_enable(ipa->clock->core); + ret = clk_prepare_enable(ipa->power->core); if (ret) { dev_err(&ipa->pdev->dev, "error %d enabling core clock\n", ret); (void)ipa_interconnect_disable(ipa); @@ -229,10 +227,10 @@ static int ipa_clock_enable(struct ipa *ipa) return ret; } -/* Inverse of ipa_clock_enable() */ -static int ipa_clock_disable(struct ipa *ipa) +/* Inverse of ipa_power_enable() */ +static int ipa_power_disable(struct ipa *ipa) { - clk_disable_unprepare(ipa->clock->core); + clk_disable_unprepare(ipa->power->core); return ipa_interconnect_disable(ipa); } @@ -243,12 +241,12 @@ static int ipa_runtime_suspend(struct device *dev) /* Endpoints aren't usable until setup is complete */ if (ipa->setup_complete) { - __clear_bit(IPA_POWER_FLAG_RESUMED, ipa->clock->flags); + __clear_bit(IPA_POWER_FLAG_RESUMED, ipa->power->flags); ipa_endpoint_suspend(ipa); gsi_suspend(&ipa->gsi); } - return ipa_clock_disable(ipa); + return ipa_power_disable(ipa); } static int ipa_runtime_resume(struct device *dev) @@ -256,7 +254,7 @@ static int ipa_runtime_resume(struct device *dev) struct ipa *ipa = dev_get_drvdata(dev); int ret; - ret = ipa_clock_enable(ipa); + ret = ipa_power_enable(ipa); if (WARN_ON(ret < 0)) return ret; @@ -273,7 +271,7 @@ static int ipa_suspend(struct device *dev) { struct ipa *ipa = dev_get_drvdata(dev); - __set_bit(IPA_POWER_FLAG_SYSTEM, ipa->clock->flags); + __set_bit(IPA_POWER_FLAG_SYSTEM, ipa->power->flags); return pm_runtime_force_suspend(dev); } @@ -285,15 +283,15 @@ static int ipa_resume(struct device *dev) ret = pm_runtime_force_resume(dev); - __clear_bit(IPA_POWER_FLAG_SYSTEM, ipa->clock->flags); + __clear_bit(IPA_POWER_FLAG_SYSTEM, ipa->power->flags); return ret; } /* Return the current IPA core clock rate */ -u32 ipa_clock_rate(struct ipa *ipa) +u32 ipa_core_clock_rate(struct ipa *ipa) { - return ipa->clock ? (u32)clk_get_rate(ipa->clock->core) : 0; + return ipa->power ? (u32)clk_get_rate(ipa->power->core) : 0; } /** @@ -312,8 +310,8 @@ static void ipa_suspend_handler(struct ipa *ipa, enum ipa_irq_id irq_id) * just to handle the interrupt, so we're done. If we are in a * system suspend, trigger a system resume. */ - if (!__test_and_set_bit(IPA_POWER_FLAG_RESUMED, ipa->clock->flags)) - if (test_bit(IPA_POWER_FLAG_SYSTEM, ipa->clock->flags)) + if (!__test_and_set_bit(IPA_POWER_FLAG_RESUMED, ipa->power->flags)) + if (test_bit(IPA_POWER_FLAG_SYSTEM, ipa->power->flags)) pm_wakeup_dev_event(&ipa->pdev->dev, 0, true); /* Acknowledge/clear the suspend interrupt on all endpoints */ @@ -345,17 +343,17 @@ static void ipa_suspend_handler(struct ipa *ipa, enum ipa_irq_id irq_id) */ void ipa_power_modem_queue_stop(struct ipa *ipa) { - struct ipa_clock *clock = ipa->clock; + struct ipa_power *power = ipa->power; unsigned long flags; - spin_lock_irqsave(&clock->spinlock, flags); + spin_lock_irqsave(&power->spinlock, flags); - if (!__test_and_clear_bit(IPA_POWER_FLAG_STARTED, clock->flags)) { + if (!__test_and_clear_bit(IPA_POWER_FLAG_STARTED, power->flags)) { netif_stop_queue(ipa->modem_netdev); - __set_bit(IPA_POWER_FLAG_STOPPED, clock->flags); + __set_bit(IPA_POWER_FLAG_STOPPED, power->flags); } - spin_unlock_irqrestore(&clock->spinlock, flags); + spin_unlock_irqrestore(&power->spinlock, flags); } /* This function starts the modem netdev transmit queue, but only if the @@ -365,23 +363,23 @@ void ipa_power_modem_queue_stop(struct ipa *ipa) */ void ipa_power_modem_queue_wake(struct ipa *ipa) { - struct ipa_clock *clock = ipa->clock; + struct ipa_power *power = ipa->power; unsigned long flags; - spin_lock_irqsave(&clock->spinlock, flags); + spin_lock_irqsave(&power->spinlock, flags); - if (__test_and_clear_bit(IPA_POWER_FLAG_STOPPED, clock->flags)) { - __set_bit(IPA_POWER_FLAG_STARTED, clock->flags); + if (__test_and_clear_bit(IPA_POWER_FLAG_STOPPED, power->flags)) { + __set_bit(IPA_POWER_FLAG_STARTED, power->flags); netif_wake_queue(ipa->modem_netdev); } - spin_unlock_irqrestore(&clock->spinlock, flags); + spin_unlock_irqrestore(&power->spinlock, flags); } /* This function clears the STARTED flag once the TX queue is operating */ void ipa_power_modem_queue_active(struct ipa *ipa) { - clear_bit(IPA_POWER_FLAG_STARTED, ipa->clock->flags); + clear_bit(IPA_POWER_FLAG_STARTED, ipa->power->flags); } int ipa_power_setup(struct ipa *ipa) @@ -404,11 +402,11 @@ void ipa_power_teardown(struct ipa *ipa) ipa_interrupt_remove(ipa->interrupt, IPA_IRQ_TX_SUSPEND); } -/* Initialize IPA clocking */ -struct ipa_clock * -ipa_clock_init(struct device *dev, const struct ipa_clock_data *data) +/* Initialize IPA power management */ +struct ipa_power * +ipa_power_init(struct device *dev, const struct ipa_power_data *data) { - struct ipa_clock *clock; + struct ipa_power *power; struct clk *clk; int ret; @@ -426,17 +424,17 @@ ipa_clock_init(struct device *dev, const struct ipa_clock_data *data) goto err_clk_put; } - clock = kzalloc(sizeof(*clock), GFP_KERNEL); - if (!clock) { + power = kzalloc(sizeof(*power), GFP_KERNEL); + if (!power) { ret = -ENOMEM; goto err_clk_put; } - clock->dev = dev; - clock->core = clk; - spin_lock_init(&clock->spinlock); - clock->interconnect_count = data->interconnect_count; + power->dev = dev; + power->core = clk; + spin_lock_init(&power->spinlock); + power->interconnect_count = data->interconnect_count; - ret = ipa_interconnect_init(clock, dev, data->interconnect_data); + ret = ipa_interconnect_init(power, dev, data->interconnect_data); if (ret) goto err_kfree; @@ -444,26 +442,26 @@ ipa_clock_init(struct device *dev, const struct ipa_clock_data *data) pm_runtime_use_autosuspend(dev); pm_runtime_enable(dev); - return clock; + return power; err_kfree: - kfree(clock); + kfree(power); err_clk_put: clk_put(clk); return ERR_PTR(ret); } -/* Inverse of ipa_clock_init() */ -void ipa_clock_exit(struct ipa_clock *clock) +/* Inverse of ipa_power_init() */ +void ipa_power_exit(struct ipa_power *power) { - struct device *dev = clock->dev; - struct clk *clk = clock->core; + struct device *dev = power->dev; + struct clk *clk = power->core; pm_runtime_disable(dev); pm_runtime_dont_use_autosuspend(dev); - ipa_interconnect_exit(clock); - kfree(clock); + ipa_interconnect_exit(power); + kfree(power); clk_put(clk); } diff --git a/drivers/net/ipa/ipa_clock.h b/drivers/net/ipa/ipa_clock.h index 7b7864f3029b..7a6a910241c1 100644 --- a/drivers/net/ipa/ipa_clock.h +++ b/drivers/net/ipa/ipa_clock.h @@ -9,18 +9,18 @@ struct device; struct ipa; -struct ipa_clock_data; +struct ipa_power_data; /* IPA device power management function block */ extern const struct dev_pm_ops ipa_pm_ops; /** - * ipa_clock_rate() - Return the current IPA core clock rate + * ipa_core_clock_rate() - Return the current IPA core clock rate * @ipa: IPA structure * * Return: The current clock rate (in Hz), or 0. */ -u32 ipa_clock_rate(struct ipa *ipa); +u32 ipa_core_clock_rate(struct ipa *ipa); /** * ipa_power_modem_queue_stop() - Possibly stop the modem netdev TX queue @@ -55,19 +55,19 @@ int ipa_power_setup(struct ipa *ipa); void ipa_power_teardown(struct ipa *ipa); /** - * ipa_clock_init() - Initialize IPA clocking + * ipa_power_init() - Initialize IPA power management * @dev: IPA device * @data: Clock configuration data * - * Return: A pointer to an ipa_clock structure, or a pointer-coded error + * Return: A pointer to an ipa_power structure, or a pointer-coded error */ -struct ipa_clock *ipa_clock_init(struct device *dev, - const struct ipa_clock_data *data); +struct ipa_power *ipa_power_init(struct device *dev, + const struct ipa_power_data *data); /** - * ipa_clock_exit() - Inverse of ipa_clock_init() - * @clock: IPA clock pointer + * ipa_power_exit() - Inverse of ipa_power_init() + * @power: IPA power pointer */ -void ipa_clock_exit(struct ipa_clock *clock); +void ipa_power_exit(struct ipa_power *power); #endif /* _IPA_CLOCK_H_ */ diff --git a/drivers/net/ipa/ipa_data-v3.1.c b/drivers/net/ipa/ipa_data-v3.1.c index 4c28189462a7..06ddb85f39b2 100644 --- a/drivers/net/ipa/ipa_data-v3.1.c +++ b/drivers/net/ipa/ipa_data-v3.1.c @@ -513,7 +513,7 @@ static const struct ipa_interconnect_data ipa_interconnect_data[] = { }; /* Clock and interconnect configuration data for an SoC having IPA v3.1 */ -static const struct ipa_clock_data ipa_clock_data = { +static const struct ipa_power_data ipa_power_data = { .core_clock_rate = 16 * 1000 * 1000, /* Hz */ .interconnect_count = ARRAY_SIZE(ipa_interconnect_data), .interconnect_data = ipa_interconnect_data, @@ -529,5 +529,5 @@ const struct ipa_data ipa_data_v3_1 = { .endpoint_data = ipa_gsi_endpoint_data, .resource_data = &ipa_resource_data, .mem_data = &ipa_mem_data, - .clock_data = &ipa_clock_data, + .power_data = &ipa_power_data, }; diff --git a/drivers/net/ipa/ipa_data-v3.5.1.c b/drivers/net/ipa/ipa_data-v3.5.1.c index af536ef8c120..760c22bbdf70 100644 --- a/drivers/net/ipa/ipa_data-v3.5.1.c +++ b/drivers/net/ipa/ipa_data-v3.5.1.c @@ -394,7 +394,7 @@ static const struct ipa_interconnect_data ipa_interconnect_data[] = { }; /* Clock and interconnect configuration data for an SoC having IPA v3.5.1 */ -static const struct ipa_clock_data ipa_clock_data = { +static const struct ipa_power_data ipa_power_data = { .core_clock_rate = 75 * 1000 * 1000, /* Hz */ .interconnect_count = ARRAY_SIZE(ipa_interconnect_data), .interconnect_data = ipa_interconnect_data, @@ -414,5 +414,5 @@ const struct ipa_data ipa_data_v3_5_1 = { .endpoint_data = ipa_gsi_endpoint_data, .resource_data = &ipa_resource_data, .mem_data = &ipa_mem_data, - .clock_data = &ipa_clock_data, + .power_data = &ipa_power_data, }; diff --git a/drivers/net/ipa/ipa_data-v4.11.c b/drivers/net/ipa/ipa_data-v4.11.c index 782f67e3e079..fea91451a0c3 100644 --- a/drivers/net/ipa/ipa_data-v4.11.c +++ b/drivers/net/ipa/ipa_data-v4.11.c @@ -382,7 +382,7 @@ static const struct ipa_interconnect_data ipa_interconnect_data[] = { }; /* Clock and interconnect configuration data for an SoC having IPA v4.11 */ -static const struct ipa_clock_data ipa_clock_data = { +static const struct ipa_power_data ipa_power_data = { .core_clock_rate = 60 * 1000 * 1000, /* Hz */ .interconnect_count = ARRAY_SIZE(ipa_interconnect_data), .interconnect_data = ipa_interconnect_data, @@ -397,5 +397,5 @@ const struct ipa_data ipa_data_v4_11 = { .endpoint_data = ipa_gsi_endpoint_data, .resource_data = &ipa_resource_data, .mem_data = &ipa_mem_data, - .clock_data = &ipa_clock_data, + .power_data = &ipa_power_data, }; diff --git a/drivers/net/ipa/ipa_data-v4.2.c b/drivers/net/ipa/ipa_data-v4.2.c index 3b09b7baa95f..2a231e79d5e1 100644 --- a/drivers/net/ipa/ipa_data-v4.2.c +++ b/drivers/net/ipa/ipa_data-v4.2.c @@ -360,7 +360,7 @@ static const struct ipa_interconnect_data ipa_interconnect_data[] = { }; /* Clock and interconnect configuration data for an SoC having IPA v4.2 */ -static const struct ipa_clock_data ipa_clock_data = { +static const struct ipa_power_data ipa_power_data = { .core_clock_rate = 100 * 1000 * 1000, /* Hz */ .interconnect_count = ARRAY_SIZE(ipa_interconnect_data), .interconnect_data = ipa_interconnect_data, @@ -376,5 +376,5 @@ const struct ipa_data ipa_data_v4_2 = { .endpoint_data = ipa_gsi_endpoint_data, .resource_data = &ipa_resource_data, .mem_data = &ipa_mem_data, - .clock_data = &ipa_clock_data, + .power_data = &ipa_power_data, }; diff --git a/drivers/net/ipa/ipa_data-v4.5.c b/drivers/net/ipa/ipa_data-v4.5.c index db6fda2fe43d..e62ab9c3ac67 100644 --- a/drivers/net/ipa/ipa_data-v4.5.c +++ b/drivers/net/ipa/ipa_data-v4.5.c @@ -443,7 +443,7 @@ static const struct ipa_interconnect_data ipa_interconnect_data[] = { }; /* Clock and interconnect configuration data for an SoC having IPA v4.5 */ -static const struct ipa_clock_data ipa_clock_data = { +static const struct ipa_power_data ipa_power_data = { .core_clock_rate = 150 * 1000 * 1000, /* Hz (150? 60?) */ .interconnect_count = ARRAY_SIZE(ipa_interconnect_data), .interconnect_data = ipa_interconnect_data, @@ -458,5 +458,5 @@ const struct ipa_data ipa_data_v4_5 = { .endpoint_data = ipa_gsi_endpoint_data, .resource_data = &ipa_resource_data, .mem_data = &ipa_mem_data, - .clock_data = &ipa_clock_data, + .power_data = &ipa_power_data, }; diff --git a/drivers/net/ipa/ipa_data-v4.9.c b/drivers/net/ipa/ipa_data-v4.9.c index 8d83e14819e2..2421b5abb5d4 100644 --- a/drivers/net/ipa/ipa_data-v4.9.c +++ b/drivers/net/ipa/ipa_data-v4.9.c @@ -432,7 +432,7 @@ static const struct ipa_interconnect_data ipa_interconnect_data[] = { }; /* Clock and interconnect configuration data for an SoC having IPA v4.9 */ -static const struct ipa_clock_data ipa_clock_data = { +static const struct ipa_power_data ipa_power_data = { .core_clock_rate = 60 * 1000 * 1000, /* Hz */ .interconnect_count = ARRAY_SIZE(ipa_interconnect_data), .interconnect_data = ipa_interconnect_data, @@ -447,5 +447,5 @@ const struct ipa_data ipa_data_v4_9 = { .endpoint_data = ipa_gsi_endpoint_data, .resource_data = &ipa_resource_data, .mem_data = &ipa_mem_data, - .clock_data = &ipa_clock_data, + .power_data = &ipa_power_data, }; diff --git a/drivers/net/ipa/ipa_data.h b/drivers/net/ipa/ipa_data.h index 5bc244c8f94e..6d329e9ce5d2 100644 --- a/drivers/net/ipa/ipa_data.h +++ b/drivers/net/ipa/ipa_data.h @@ -19,7 +19,7 @@ * IPA and GSI resources to use for a given platform. This data is supplied * via the Device Tree match table, associated with a particular compatible * string. The data defines information about how resources, endpoints and - * channels, memory, clocking and so on are allocated and used for the + * channels, memory, power and so on are allocated and used for the * platform. * * Resources are data structures used internally by the IPA hardware. The @@ -265,12 +265,12 @@ struct ipa_interconnect_data { }; /** - * struct ipa_clock_data - description of IPA clock and interconnect rates + * struct ipa_power_data - description of IPA power configuration data * @core_clock_rate: Core clock rate (Hz) * @interconnect_count: Number of entries in the interconnect_data array * @interconnect_data: IPA interconnect configuration data */ -struct ipa_clock_data { +struct ipa_power_data { u32 core_clock_rate; u32 interconnect_count; /* # entries in interconnect_data[] */ const struct ipa_interconnect_data *interconnect_data; @@ -286,7 +286,7 @@ struct ipa_clock_data { * @endpoint_data: IPA endpoint/GSI channel data * @resource_data: IPA resource configuration data * @mem_data: IPA memory region data - * @clock_data: IPA clock and interconnect data + * @power_data: IPA power data */ struct ipa_data { enum ipa_version version; @@ -297,7 +297,7 @@ struct ipa_data { const struct ipa_gsi_endpoint_data *endpoint_data; const struct ipa_resource_data *resource_data; const struct ipa_mem_data *mem_data; - const struct ipa_clock_data *clock_data; + const struct ipa_power_data *power_data; }; extern const struct ipa_data ipa_data_v3_1; diff --git a/drivers/net/ipa/ipa_endpoint.c b/drivers/net/ipa/ipa_endpoint.c index 08ee37ae2881..f88b43d44ba1 100644 --- a/drivers/net/ipa/ipa_endpoint.c +++ b/drivers/net/ipa/ipa_endpoint.c @@ -810,7 +810,7 @@ static u32 hol_block_timer_val(struct ipa *ipa, u32 microseconds) return hol_block_timer_qtime_val(ipa, microseconds); /* Use 64 bit arithmetic to avoid overflow... */ - rate = ipa_clock_rate(ipa); + rate = ipa_core_clock_rate(ipa); ticks = DIV_ROUND_CLOSEST(microseconds * rate, 128 * USEC_PER_SEC); /* ...but we still need to fit into a 32-bit register */ WARN_ON(ticks > U32_MAX); diff --git a/drivers/net/ipa/ipa_main.c b/drivers/net/ipa/ipa_main.c index b4d7534045a1..c8d9c6db0b7e 100644 --- a/drivers/net/ipa/ipa_main.c +++ b/drivers/net/ipa/ipa_main.c @@ -326,8 +326,8 @@ static void ipa_idle_indication_cfg(struct ipa *ipa, * @ipa: IPA pointer * * Configures when the IPA signals it is idle to the global clock - * controller, which can respond by scalling down the clock to - * save power. + * controller, which can respond by scaling down the clock to save + * power. */ static void ipa_hardware_dcd_config(struct ipa *ipa) { @@ -417,7 +417,7 @@ static void ipa_hardware_deconfig(struct ipa *ipa) * @ipa: IPA pointer * @data: IPA configuration data * - * Perform initialization requiring IPA clock to be enabled. + * Perform initialization requiring IPA power to be enabled. */ static int ipa_config(struct ipa *ipa, const struct ipa_data *data) { @@ -647,7 +647,7 @@ static bool ipa_version_valid(enum ipa_version version) * in several stages: * - The "init" stage involves activities that can be initialized without * access to the IPA hardware. - * - The "config" stage requires the IPA clock to be active so IPA registers + * - The "config" stage requires IPA power to be active so IPA registers * can be accessed, but does not require the use of IPA immediate commands. * - The "setup" stage uses IPA immediate commands, and so requires the GSI * layer to be initialized. @@ -663,14 +663,14 @@ static int ipa_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; const struct ipa_data *data; - struct ipa_clock *clock; + struct ipa_power *power; bool modem_init; struct ipa *ipa; int ret; ipa_validate_build(); - /* Get configuration data early; needed for clock initialization */ + /* Get configuration data early; needed for power initialization */ data = of_device_get_match_data(dev); if (!data) { dev_err(dev, "matched hardware not supported\n"); @@ -691,20 +691,20 @@ static int ipa_probe(struct platform_device *pdev) /* The clock and interconnects might not be ready when we're * probed, so might return -EPROBE_DEFER. */ - clock = ipa_clock_init(dev, data->clock_data); - if (IS_ERR(clock)) - return PTR_ERR(clock); + power = ipa_power_init(dev, data->power_data); + if (IS_ERR(power)) + return PTR_ERR(power); /* No more EPROBE_DEFER. Allocate and initialize the IPA structure */ ipa = kzalloc(sizeof(*ipa), GFP_KERNEL); if (!ipa) { ret = -ENOMEM; - goto err_clock_exit; + goto err_power_exit; } ipa->pdev = pdev; dev_set_drvdata(dev, ipa); - ipa->clock = clock; + ipa->power = power; ipa->version = data->version; init_completion(&ipa->completion); @@ -737,7 +737,7 @@ static int ipa_probe(struct platform_device *pdev) if (ret) goto err_table_exit; - /* The clock needs to be active for config and setup */ + /* Power needs to be active for config and setup */ ret = pm_runtime_get_sync(dev); if (WARN_ON(ret < 0)) goto err_power_put; @@ -788,8 +788,8 @@ err_reg_exit: ipa_reg_exit(ipa); err_kfree_ipa: kfree(ipa); -err_clock_exit: - ipa_clock_exit(clock); +err_power_exit: + ipa_power_exit(power); return ret; } @@ -797,7 +797,7 @@ err_clock_exit: static int ipa_remove(struct platform_device *pdev) { struct ipa *ipa = dev_get_drvdata(&pdev->dev); - struct ipa_clock *clock = ipa->clock; + struct ipa_power *power = ipa->power; struct device *dev = &pdev->dev; int ret; @@ -828,7 +828,7 @@ out_power_put: ipa_mem_exit(ipa); ipa_reg_exit(ipa); kfree(ipa); - ipa_clock_exit(clock); + ipa_power_exit(power); return 0; } diff --git a/drivers/net/ipa/ipa_modem.c b/drivers/net/ipa/ipa_modem.c index 18b1f8d6d729..2ed80855f7cf 100644 --- a/drivers/net/ipa/ipa_modem.c +++ b/drivers/net/ipa/ipa_modem.c @@ -415,7 +415,7 @@ static int ipa_modem_notify(struct notifier_block *nb, unsigned long action, switch (action) { case QCOM_SSR_BEFORE_POWERUP: dev_info(dev, "received modem starting event\n"); - ipa_uc_clock(ipa); + ipa_uc_power(ipa); ipa_smp2p_notify_reset(ipa); break; diff --git a/drivers/net/ipa/ipa_smp2p.c b/drivers/net/ipa/ipa_smp2p.c index 7e1cef0fc67c..df7639c39d71 100644 --- a/drivers/net/ipa/ipa_smp2p.c +++ b/drivers/net/ipa/ipa_smp2p.c @@ -23,19 +23,19 @@ * SMP2P is a primitive communication mechanism available between the AP and * the modem. The IPA driver uses this for two purposes: to enable the modem * to state that the GSI hardware is ready to use; and to communicate the - * state of the IPA clock in the event of a crash. + * state of IPA power in the event of a crash. * * GSI needs to have early initialization completed before it can be used. * This initialization is done either by Trust Zone or by the modem. In the * latter case, the modem uses an SMP2P interrupt to tell the AP IPA driver * when the GSI is ready to use. * - * The modem is also able to inquire about the current state of the IPA - * clock by trigging another SMP2P interrupt to the AP. We communicate - * whether the clock is enabled using two SMP2P state bits--one to - * indicate the clock state (on or off), and a second to indicate the - * clock state bit is valid. The modem will poll the valid bit until it - * is set, and at that time records whether the AP has the IPA clock enabled. + * The modem is also able to inquire about the current state of IPA + * power by trigging another SMP2P interrupt to the AP. We communicate + * whether power is enabled using two SMP2P state bits--one to indicate + * the power state (on or off), and a second to indicate the power state + * bit is valid. The modem will poll the valid bit until it is set, and + * at that time records whether the AP has IPA power enabled. * * Finally, if the AP kernel panics, we update the SMP2P state bits even if * we never receive an interrupt from the modem requesting this. @@ -45,14 +45,14 @@ * struct ipa_smp2p - IPA SMP2P information * @ipa: IPA pointer * @valid_state: SMEM state indicating enabled state is valid - * @enabled_state: SMEM state to indicate clock is enabled + * @enabled_state: SMEM state to indicate power is enabled * @valid_bit: Valid bit in 32-bit SMEM state mask * @enabled_bit: Enabled bit in 32-bit SMEM state mask * @enabled_bit: Enabled bit in 32-bit SMEM state mask - * @clock_query_irq: IPA interrupt triggered by modem for clock query + * @clock_query_irq: IPA interrupt triggered by modem for power query * @setup_ready_irq: IPA interrupt triggered by modem to signal GSI ready - * @clock_on: Whether IPA clock is on - * @notified: Whether modem has been notified of clock state + * @power_on: Whether IPA power is on + * @notified: Whether modem has been notified of power state * @disabled: Whether setup ready interrupt handling is disabled * @mutex: Mutex protecting ready-interrupt/shutdown interlock * @panic_notifier: Panic notifier structure @@ -65,7 +65,7 @@ struct ipa_smp2p { u32 enabled_bit; u32 clock_query_irq; u32 setup_ready_irq; - bool clock_on; + bool power_on; bool notified; bool disabled; struct mutex mutex; @@ -73,13 +73,13 @@ struct ipa_smp2p { }; /** - * ipa_smp2p_notify() - use SMP2P to tell modem about IPA clock state + * ipa_smp2p_notify() - use SMP2P to tell modem about IPA power state * @smp2p: SMP2P information * * This is called either when the modem has requested it (by triggering - * the modem clock query IPA interrupt) or whenever the AP is shutting down + * the modem power query IPA interrupt) or whenever the AP is shutting down * (via a panic notifier). It sets the two SMP2P state bits--one saying - * whether the IPA clock is running, and the other indicating the first bit + * whether the IPA power is on, and the other indicating the first bit * is valid. */ static void ipa_smp2p_notify(struct ipa_smp2p *smp2p) @@ -92,11 +92,11 @@ static void ipa_smp2p_notify(struct ipa_smp2p *smp2p) return; dev = &smp2p->ipa->pdev->dev; - smp2p->clock_on = pm_runtime_get_if_active(dev, true) > 0; + smp2p->power_on = pm_runtime_get_if_active(dev, true) > 0; - /* Signal whether the clock is enabled */ + /* Signal whether the IPA power is enabled */ mask = BIT(smp2p->enabled_bit); - value = smp2p->clock_on ? mask : 0; + value = smp2p->power_on ? mask : 0; qcom_smem_state_update_bits(smp2p->enabled_state, mask, value); /* Now indicate that the enabled flag is valid */ @@ -126,7 +126,7 @@ static int ipa_smp2p_panic_notifier(struct notifier_block *nb, ipa_smp2p_notify(smp2p); - if (smp2p->clock_on) + if (smp2p->power_on) ipa_uc_panic_notifier(smp2p->ipa); return NOTIFY_DONE; @@ -209,17 +209,17 @@ static void ipa_smp2p_irq_exit(struct ipa_smp2p *smp2p, u32 irq) free_irq(irq, smp2p); } -/* Drop the clock reference if it was taken in ipa_smp2p_notify() */ -static void ipa_smp2p_clock_release(struct ipa *ipa) +/* Drop the power reference if it was taken in ipa_smp2p_notify() */ +static void ipa_smp2p_power_release(struct ipa *ipa) { struct device *dev = &ipa->pdev->dev; - if (!ipa->smp2p->clock_on) + if (!ipa->smp2p->power_on) return; pm_runtime_mark_last_busy(dev); (void)pm_runtime_put_autosuspend(dev); - ipa->smp2p->clock_on = false; + ipa->smp2p->power_on = false; } /* Initialize the IPA SMP2P subsystem */ @@ -253,7 +253,7 @@ int ipa_smp2p_init(struct ipa *ipa, bool modem_init) smp2p->ipa = ipa; - /* These fields are needed by the clock query interrupt + /* These fields are needed by the power query interrupt * handler, so initialize them now. */ mutex_init(&smp2p->mutex); @@ -306,8 +306,8 @@ void ipa_smp2p_exit(struct ipa *ipa) ipa_smp2p_irq_exit(smp2p, smp2p->setup_ready_irq); ipa_smp2p_panic_notifier_unregister(smp2p); ipa_smp2p_irq_exit(smp2p, smp2p->clock_query_irq); - /* We won't get notified any more; drop clock reference (if any) */ - ipa_smp2p_clock_release(ipa); + /* We won't get notified any more; drop power reference (if any) */ + ipa_smp2p_power_release(ipa); ipa->smp2p = NULL; mutex_destroy(&smp2p->mutex); kfree(smp2p); @@ -336,13 +336,13 @@ void ipa_smp2p_notify_reset(struct ipa *ipa) if (!smp2p->notified) return; - ipa_smp2p_clock_release(ipa); + ipa_smp2p_power_release(ipa); - /* Reset the clock enabled valid flag */ + /* Reset the power enabled valid flag */ mask = BIT(smp2p->valid_bit); qcom_smem_state_update_bits(smp2p->valid_state, mask, 0); - /* Mark the clock disabled for good measure... */ + /* Mark the power disabled for good measure... */ mask = BIT(smp2p->enabled_bit); qcom_smem_state_update_bits(smp2p->enabled_state, mask, 0); diff --git a/drivers/net/ipa/ipa_smp2p.h b/drivers/net/ipa/ipa_smp2p.h index 20319438a841..99a956789638 100644 --- a/drivers/net/ipa/ipa_smp2p.h +++ b/drivers/net/ipa/ipa_smp2p.h @@ -39,7 +39,7 @@ void ipa_smp2p_disable(struct ipa *ipa); * ipa_smp2p_notify_reset() - Reset modem notification state * @ipa: IPA pointer * - * If the modem crashes it queries the IPA clock state. In cleaning + * If the modem crashes it queries the IPA power state. In cleaning * up after such a crash this is used to reset some state maintained * for managing this notification. */ diff --git a/drivers/net/ipa/ipa_uc.c b/drivers/net/ipa/ipa_uc.c index de0438527019..856e55a080a7 100644 --- a/drivers/net/ipa/ipa_uc.c +++ b/drivers/net/ipa/ipa_uc.c @@ -147,16 +147,16 @@ static void ipa_uc_response_hdlr(struct ipa *ipa, enum ipa_irq_id irq_id) * should only receive responses from the microcontroller when it has * sent it a request message. * - * We can drop the clock reference taken in ipa_uc_clock() once we + * We can drop the power reference taken in ipa_uc_power() once we * know the microcontroller has finished its initialization. */ switch (shared->response) { case IPA_UC_RESPONSE_INIT_COMPLETED: - if (ipa->uc_clocked) { + if (ipa->uc_powered) { ipa->uc_loaded = true; pm_runtime_mark_last_busy(dev); (void)pm_runtime_put_autosuspend(dev); - ipa->uc_clocked = false; + ipa->uc_powered = false; } else { dev_warn(dev, "unexpected init_completed response\n"); } @@ -171,7 +171,7 @@ static void ipa_uc_response_hdlr(struct ipa *ipa, enum ipa_irq_id irq_id) /* Configure the IPA microcontroller subsystem */ void ipa_uc_config(struct ipa *ipa) { - ipa->uc_clocked = false; + ipa->uc_powered = false; ipa->uc_loaded = false; ipa_interrupt_add(ipa->interrupt, IPA_IRQ_UC_0, ipa_uc_event_handler); ipa_interrupt_add(ipa->interrupt, IPA_IRQ_UC_1, ipa_uc_response_hdlr); @@ -184,15 +184,15 @@ void ipa_uc_deconfig(struct ipa *ipa) ipa_interrupt_remove(ipa->interrupt, IPA_IRQ_UC_1); ipa_interrupt_remove(ipa->interrupt, IPA_IRQ_UC_0); - if (!ipa->uc_clocked) + if (!ipa->uc_powered) return; pm_runtime_mark_last_busy(dev); (void)pm_runtime_put_autosuspend(dev); } -/* Take a proxy clock reference for the microcontroller */ -void ipa_uc_clock(struct ipa *ipa) +/* Take a proxy power reference for the microcontroller */ +void ipa_uc_power(struct ipa *ipa) { static bool already; struct device *dev; @@ -209,7 +209,7 @@ void ipa_uc_clock(struct ipa *ipa) pm_runtime_put_noidle(dev); dev_err(dev, "error %d getting proxy power\n", ret); } else { - ipa->uc_clocked = true; + ipa->uc_powered = true; } } diff --git a/drivers/net/ipa/ipa_uc.h b/drivers/net/ipa/ipa_uc.h index 14e4e1115aa7..23847f934d64 100644 --- a/drivers/net/ipa/ipa_uc.h +++ b/drivers/net/ipa/ipa_uc.h @@ -21,18 +21,18 @@ void ipa_uc_config(struct ipa *ipa); void ipa_uc_deconfig(struct ipa *ipa); /** - * ipa_uc_clock() - Take a proxy clock reference for the microcontroller + * ipa_uc_power() - Take a proxy power reference for the microcontroller * @ipa: IPA pointer * * The first time the modem boots, it loads firmware for and starts the * IPA-resident microcontroller. The microcontroller signals that it * has completed its initialization by sending an INIT_COMPLETED response - * message to the AP. The AP must ensure the IPA core clock is operating - * until it receives this message, and to do so we take a "proxy" clock + * message to the AP. The AP must ensure the IPA is powered until + * it receives this message, and to do so we take a "proxy" clock * reference on its behalf here. Once we receive the INIT_COMPLETED - * message (in ipa_uc_response_hdlr()) we drop this clock reference. + * message (in ipa_uc_response_hdlr()) we drop this power reference. */ -void ipa_uc_clock(struct ipa *ipa); +void ipa_uc_power(struct ipa *ipa); /** * ipa_uc_panic_notifier() |