diff options
| -rw-r--r-- | drivers/gpu/drm/sti/Makefile | 7 | ||||
| -rw-r--r-- | drivers/gpu/drm/sti/sti_hdmi.c | 810 | ||||
| -rw-r--r-- | drivers/gpu/drm/sti/sti_hdmi.h | 88 | ||||
| -rw-r--r-- | drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c | 336 | ||||
| -rw-r--r-- | drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h | 14 | ||||
| -rw-r--r-- | drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c | 211 | ||||
| -rw-r--r-- | drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h | 14 |
7 files changed, 1479 insertions, 1 deletions
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile index 1534d4c43e6d..12e1a07492f0 100644 --- a/drivers/gpu/drm/sti/Makefile +++ b/drivers/gpu/drm/sti/Makefile @@ -1,3 +1,8 @@ +stihdmi-y := sti_hdmi.o \ + sti_hdmi_tx3g0c55phy.o \ + sti_hdmi_tx3g4c28phy.o \ + obj-$(CONFIG_DRM_STI) = \ sti_vtg.o \ - sti_vtac.o
\ No newline at end of file + sti_vtac.o \ + stihdmi.o
\ No newline at end of file diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c new file mode 100644 index 000000000000..284e541d970d --- /dev/null +++ b/drivers/gpu/drm/sti/sti_hdmi.c @@ -0,0 +1,810 @@ +/* + * Copyright (C) STMicroelectronics SA 2014 + * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/clk.h> +#include <linux/component.h> +#include <linux/hdmi.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/reset.h> + +#include <drm/drmP.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_edid.h> + +#include "sti_hdmi.h" +#include "sti_hdmi_tx3g4c28phy.h" +#include "sti_hdmi_tx3g0c55phy.h" +#include "sti_vtg.h" + +#define HDMI_CFG 0x0000 +#define HDMI_INT_EN 0x0004 +#define HDMI_INT_STA 0x0008 +#define HDMI_INT_CLR 0x000C +#define HDMI_STA 0x0010 +#define HDMI_ACTIVE_VID_XMIN 0x0100 +#define HDMI_ACTIVE_VID_XMAX 0x0104 +#define HDMI_ACTIVE_VID_YMIN 0x0108 +#define HDMI_ACTIVE_VID_YMAX 0x010C +#define HDMI_DFLT_CHL0_DAT 0x0110 +#define HDMI_DFLT_CHL1_DAT 0x0114 +#define HDMI_DFLT_CHL2_DAT 0x0118 +#define HDMI_SW_DI_1_HEAD_WORD 0x0210 +#define HDMI_SW_DI_1_PKT_WORD0 0x0214 +#define HDMI_SW_DI_1_PKT_WORD1 0x0218 +#define HDMI_SW_DI_1_PKT_WORD2 0x021C +#define HDMI_SW_DI_1_PKT_WORD3 0x0220 +#define HDMI_SW_DI_1_PKT_WORD4 0x0224 +#define HDMI_SW_DI_1_PKT_WORD5 0x0228 +#define HDMI_SW_DI_1_PKT_WORD6 0x022C +#define HDMI_SW_DI_CFG 0x0230 + +#define HDMI_IFRAME_SLOT_AVI 1 + +#define XCAT(prefix, x, suffix) prefix ## x ## suffix +#define HDMI_SW_DI_N_HEAD_WORD(x) XCAT(HDMI_SW_DI_, x, _HEAD_WORD) +#define HDMI_SW_DI_N_PKT_WORD0(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD0) +#define HDMI_SW_DI_N_PKT_WORD1(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD1) +#define HDMI_SW_DI_N_PKT_WORD2(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD2) +#define HDMI_SW_DI_N_PKT_WORD3(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD3) +#define HDMI_SW_DI_N_PKT_WORD4(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD4) +#define HDMI_SW_DI_N_PKT_WORD5(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD5) +#define HDMI_SW_DI_N_PKT_WORD6(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD6) + +#define HDMI_IFRAME_DISABLED 0x0 +#define HDMI_IFRAME_SINGLE_SHOT 0x1 +#define HDMI_IFRAME_FIELD 0x2 +#define HDMI_IFRAME_FRAME 0x3 +#define HDMI_IFRAME_MASK 0x3 +#define HDMI_IFRAME_CFG_DI_N(x, n) ((x) << ((n-1)*4)) /* n from 1 to 6 */ + +#define HDMI_CFG_DEVICE_EN BIT(0) +#define HDMI_CFG_HDMI_NOT_DVI BIT(1) +#define HDMI_CFG_HDCP_EN BIT(2) +#define HDMI_CFG_ESS_NOT_OESS BIT(3) +#define HDMI_CFG_H_SYNC_POL_NEG BIT(4) +#define HDMI_CFG_SINK_TERM_DET_EN BIT(5) +#define HDMI_CFG_V_SYNC_POL_NEG BIT(6) +#define HDMI_CFG_422_EN BIT(8) +#define HDMI_CFG_FIFO_OVERRUN_CLR BIT(12) +#define HDMI_CFG_FIFO_UNDERRUN_CLR BIT(13) +#define HDMI_CFG_SW_RST_EN BIT(31) + +#define HDMI_INT_GLOBAL BIT(0) +#define HDMI_INT_SW_RST BIT(1) +#define HDMI_INT_PIX_CAP BIT(3) +#define HDMI_INT_HOT_PLUG BIT(4) +#define HDMI_INT_DLL_LCK BIT(5) +#define HDMI_INT_NEW_FRAME BIT(6) +#define HDMI_INT_GENCTRL_PKT BIT(7) +#define HDMI_INT_SINK_TERM_PRESENT BIT(11) + +#define HDMI_DEFAULT_INT (HDMI_INT_SINK_TERM_PRESENT \ + | HDMI_INT_DLL_LCK \ + | HDMI_INT_HOT_PLUG \ + | HDMI_INT_GLOBAL) + +#define HDMI_WORKING_INT (HDMI_INT_SINK_TERM_PRESENT \ + | HDMI_INT_GENCTRL_PKT \ + | HDMI_INT_NEW_FRAME \ + | HDMI_INT_DLL_LCK \ + | HDMI_INT_HOT_PLUG \ + | HDMI_INT_PIX_CAP \ + | HDMI_INT_SW_RST \ + | HDMI_INT_GLOBAL) + +#define HDMI_STA_SW_RST BIT(1) + +struct sti_hdmi_connector { + struct drm_connector drm_connector; + struct drm_encoder *encoder; + struct sti_hdmi *hdmi; +}; + +#define to_sti_hdmi_connector(x) \ + container_of(x, struct sti_hdmi_connector, drm_connector) + +u32 hdmi_read(struct sti_hdmi *hdmi, int offset) +{ + return readl(hdmi->regs + offset); +} + +void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset) +{ + writel(val, hdmi->regs + offset); +} + +/** + * HDMI interrupt handler threaded + * + * @irq: irq number + * @arg: connector structure + */ +static irqreturn_t hdmi_irq_thread(int irq, void *arg) +{ + struct sti_hdmi *hdmi = arg; + + /* Hot plug/unplug IRQ */ + if (hdmi->irq_status & HDMI_INT_HOT_PLUG) { + /* read gpio to get the status */ + hdmi->hpd = gpio_get_value(hdmi->hpd_gpio); + if (hdmi->drm_dev) + drm_helper_hpd_irq_event(hdmi->drm_dev); + } + + /* Sw reset and PLL lock are exclusive so we can use the same + * event to signal them + */ + if (hdmi->irq_status & (HDMI_INT_SW_RST | HDMI_INT_DLL_LCK)) { + hdmi->event_received = true; + wake_up_interruptible(&hdmi->wait_event); + } + + return IRQ_HANDLED; +} + +/** + * HDMI interrupt handler + * + * @irq: irq number + * @arg: connector structure + */ +static irqreturn_t hdmi_irq(int irq, void *arg) +{ + struct sti_hdmi *hdmi = arg; + + /* read interrupt status */ + hdmi->irq_status = hdmi_read(hdmi, HDMI_INT_STA); + + /* clear interrupt status */ + hdmi_write(hdmi, hdmi->irq_status, HDMI_INT_CLR); + + /* force sync bus write */ + hdmi_read(hdmi, HDMI_INT_STA); + + return IRQ_WAKE_THREAD; +} + +/** + * Set hdmi active area depending on the drm display mode selected + * + * @hdmi: pointer on the hdmi internal structure + */ +static void hdmi_active_area(struct sti_hdmi *hdmi) +{ + u32 xmin, xmax; + u32 ymin, ymax; + + xmin = sti_vtg_get_pixel_number(hdmi->mode, 0); + xmax = sti_vtg_get_pixel_number(hdmi->mode, hdmi->mode.hdisplay - 1); + ymin = sti_vtg_get_line_number(hdmi->mode, 0); + ymax = sti_vtg_get_line_number(hdmi->mode, hdmi->mode.vdisplay - 1); + + hdmi_write(hdmi, xmin, HDMI_ACTIVE_VID_XMIN); + hdmi_write(hdmi, xmax, HDMI_ACTIVE_VID_XMAX); + hdmi_write(hdmi, ymin, HDMI_ACTIVE_VID_YMIN); + hdmi_write(hdmi, ymax, HDMI_ACTIVE_VID_YMAX); +} + +/** + * Overall hdmi configuration + * + * @hdmi: pointer on the hdmi internal structure + */ +static void hdmi_config(struct sti_hdmi *hdmi) +{ + u32 conf; + + DRM_DEBUG_DRIVER("\n"); + + /* Clear overrun and underrun fifo */ + conf = HDMI_CFG_FIFO_OVERRUN_CLR | HDMI_CFG_FIFO_UNDERRUN_CLR; + + /* Enable HDMI mode not DVI */ + conf |= HDMI_CFG_HDMI_NOT_DVI | HDMI_CFG_ESS_NOT_OESS; + + /* Enable sink term detection */ + conf |= HDMI_CFG_SINK_TERM_DET_EN; + + /* Set Hsync polarity */ + if (hdmi->mode.flags & DRM_MODE_FLAG_NHSYNC) { + DRM_DEBUG_DRIVER("H Sync Negative\n"); + conf |= HDMI_CFG_H_SYNC_POL_NEG; + } + + /* Set Vsync polarity */ + if (hdmi->mode.flags & DRM_MODE_FLAG_NVSYNC) { + DRM_DEBUG_DRIVER("V Sync Negative\n"); + conf |= HDMI_CFG_V_SYNC_POL_NEG; + } + + /* Enable HDMI */ + conf |= HDMI_CFG_DEVICE_EN; + + hdmi_write(hdmi, conf, HDMI_CFG); +} + +/** + * Prepare and configure the AVI infoframe + * + * AVI infoframe are transmitted at least once per two video field and + * contains information about HDMI transmission mode such as color space, + * colorimetry, ... + * + * @hdmi: pointer on the hdmi internal structure + * + * Return negative value if error occurs + */ +static int hdmi_avi_infoframe_config(struct sti_hdmi *hdmi) +{ + struct drm_display_mode *mode = &hdmi->mode; + struct hdmi_avi_infoframe infoframe; + u8 buffer[HDMI_INFOFRAME_SIZE(AVI)]; + u8 *frame = buffer + HDMI_INFOFRAME_HEADER_SIZE; + u32 val; + int ret; + + DRM_DEBUG_DRIVER("\n"); + + ret = drm_hdmi_avi_infoframe_from_display_mode(&infoframe, mode); + if (ret < 0) { + DRM_ERROR("failed to setup AVI infoframe: %d\n", ret); + return ret; + } + + /* fixed infoframe configuration not linked to the mode */ + infoframe.colorspace = HDMI_COLORSPACE_RGB; + infoframe.quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT; + infoframe.colorimetry = HDMI_COLORIMETRY_NONE; + + ret = hdmi_avi_infoframe_pack(&infoframe, buffer, sizeof(buffer)); + if (ret < 0) { + DRM_ERROR("failed to pack AVI infoframe: %d\n", ret); + return ret; + } + + /* Disable transmission slot for AVI infoframe */ + val = hdmi_read(hdmi, HDMI_SW_DI_CFG); + val &= ~HDMI_IFRAME_CFG_DI_N(HDMI_IFRAME_MASK, HDMI_IFRAME_SLOT_AVI); + hdmi_write(hdmi, val, HDMI_SW_DI_CFG); + + /* Infoframe header */ + val = buffer[0x0]; + val |= buffer[0x1] << 8; + val |= buffer[0x2] << 16; + hdmi_write(hdmi, val, HDMI_SW_DI_N_HEAD_WORD(HDMI_IFRAME_SLOT_AVI)); + + /* Infoframe packet bytes */ + val = frame[0x0]; + val |= frame[0x1] << 8; + val |= frame[0x2] << 16; + val |= frame[0x3] << 24; + hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD0(HDMI_IFRAME_SLOT_AVI)); + + val = frame[0x4]; + val |= frame[0x5] << 8; + val |= frame[0x6] << 16; + val |= frame[0x7] << 24; + hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD1(HDMI_IFRAME_SLOT_AVI)); + + val = frame[0x8]; + val |= frame[0x9] << 8; + val |= frame[0xA] << 16; + val |= frame[0xB] << 24; + hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD2(HDMI_IFRAME_SLOT_AVI)); + + val = frame[0xC]; + val |= frame[0xD] << 8; + hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD3(HDMI_IFRAME_SLOT_AVI)); + + /* Enable transmission slot for AVI infoframe + * According to the hdmi specification, AVI infoframe should be + * transmitted at least once per two video fields + */ + val = hdmi_read(hdmi, HDMI_SW_DI_CFG); + val |= HDMI_IFRAME_CFG_DI_N(HDMI_IFRAME_FIELD, HDMI_IFRAME_SLOT_AVI); + hdmi_write(hdmi, val, HDMI_SW_DI_CFG); + + return 0; +} + +/** + * Software reset of the hdmi subsystem + * + * @hdmi: pointer on the hdmi internal structure + * + */ +#define HDMI_TIMEOUT_SWRESET 100 /*milliseconds */ +static void hdmi_swreset(struct sti_hdmi *hdmi) +{ + u32 val; + + DRM_DEBUG_DRIVER("\n"); + + /* Enable hdmi_audio clock only during hdmi reset */ + if (clk_prepare_enable(hdmi->clk_audio)) + DRM_INFO("Failed to prepare/enable hdmi_audio clk\n"); + + /* Sw reset */ + hdmi->event_received = false; + + val = hdmi_read(hdmi, HDMI_CFG); + val |= HDMI_CFG_SW_RST_EN; + hdmi_write(hdmi, val, HDMI_CFG); + + /* Wait reset completed */ + wait_event_interruptible_timeout(hdmi->wait_event, + hdmi->event_received == true, + msecs_to_jiffies + (HDMI_TIMEOUT_SWRESET)); + + /* + * HDMI_STA_SW_RST bit is set to '1' when SW_RST bit in HDMI_CFG is + * set to '1' and clk_audio is running. + */ + if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_SW_RST) == 0) + DRM_DEBUG_DRIVER("Warning: HDMI sw reset timeout occurs\n"); + + val = hdmi_read(hdmi, HDMI_CFG); + val &= ~HDMI_CFG_SW_RST_EN; + hdmi_write(hdmi, val, HDMI_CFG); + + /* Disable hdmi_audio clock. Not used anymore for drm purpose */ + clk_disable_unprepare(hdmi->clk_audio); +} + +static void sti_hdmi_disable(struct drm_bridge *bridge) +{ + struct sti_hdmi *hdmi = bridge->driver_private; + + u32 val = hdmi_read(hdmi, HDMI_CFG); + + if (!hdmi->enabled) + return; + + DRM_DEBUG_DRIVER("\n"); + + /* Disable HDMI */ + val &= ~HDMI_CFG_DEVICE_EN; + hdmi_write(hdmi, val, HDMI_CFG); + + hdmi_write(hdmi, 0xffffffff, HDMI_INT_CLR); + + /* Stop the phy */ + hdmi->phy_ops->stop(hdmi); + + /* Set the default channel data to be a dark red */ + hdmi_write(hdmi, 0x0000, HDMI_DFLT_CHL0_DAT); + hdmi_write(hdmi, 0x0000, HDMI_DFLT_CHL1_DAT); + hdmi_write(hdmi, 0x0060, HDMI_DFLT_CHL2_DAT); + + /* Disable/unprepare hdmi clock */ + clk_disable_unprepare(hdmi->clk_phy); + clk_disable_unprepare(hdmi->clk_tmds); + clk_disable_unprepare(hdmi->clk_pix); + + hdmi->enabled = false; +} + +static void sti_hdmi_pre_enable(struct drm_bridge *bridge) +{ + struct sti_hdmi *hdmi = bridge->driver_private; + + DRM_DEBUG_DRIVER("\n"); + + if (hdmi->enabled) + return; + + /* Prepare/enable clocks */ + if (clk_prepare_enable(hdmi->clk_pix)) + DRM_ERROR("Failed to prepare/enable hdmi_pix clk\n"); + if (clk_prepare_enable(hdmi->clk_tmds)) + DRM_ERROR("Failed to prepare/enable hdmi_tmds clk\n"); + if (clk_prepare_enable(hdmi->clk_phy)) + DRM_ERROR("Failed to prepare/enable hdmi_rejec_pll clk\n"); + + hdmi->enabled = true; + + /* Program hdmi serializer and start phy */ + if (!hdmi->phy_ops->start(hdmi)) { + DRM_ERROR("Unable to start hdmi phy\n"); + return; + } + + /* Program hdmi active area */ + hdmi_active_area(hdmi); + + /* Enable working interrupts */ + hdmi_write(hdmi, HDMI_WORKING_INT, HDMI_INT_EN); + + /* Program hdmi config */ + hdmi_config(hdmi); + + /* Program AVI infoframe */ + if (hdmi_avi_infoframe_config(hdmi)) + DRM_ERROR("Unable to configure AVI infoframe\n"); + + /* Sw reset */ + hdmi_swreset(hdmi); +} + +static void sti_hdmi_set_mode(struct drm_bridge *bridge, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct sti_hdmi *hdmi = bridge->driver_private; + int ret; + + DRM_DEBUG_DRIVER("\n"); + + /* Copy the drm display mode in the connector local structure */ + memcpy(&hdmi->mode, mode, sizeof(struct drm_display_mode)); + + /* Update clock framerate according to the selected mode */ + ret = clk_set_rate(hdmi->clk_pix, mode->clock * 1000); + if (ret < 0) { + DRM_ERROR("Cannot set rate (%dHz) for hdmi_pix clk\n", + mode->clock * 1000); + return; + } + ret = clk_set_rate(hdmi->clk_phy, mode->clock * 1000); + if (ret < 0) { + DRM_ERROR("Cannot set rate (%dHz) for hdmi_rejection_pll clk\n", + mode->clock * 1000); + return; + } +} + +static void sti_hdmi_bridge_nope(struct drm_bridge *bridge) +{ + /* do nothing */ +} + +static void sti_hdmi_brigde_destroy(struct drm_bridge *bridge) +{ + drm_bridge_cleanup(bridge); + kfree(bridge); +} + +static const struct drm_bridge_funcs sti_hdmi_bridge_funcs = { + .pre_enable = sti_hdmi_pre_enable, + .enable = sti_hdmi_bridge_nope, + .disable = sti_hdmi_disable, + .post_disable = sti_hdmi_bridge_nope, + .mode_set = sti_hdmi_set_mode, + .destroy = sti_hdmi_brigde_destroy, +}; + +static int sti_hdmi_connector_get_modes(struct drm_connector *connector) +{ + struct i2c_adapter *i2c_adap; + struct edid *edid; + int count; + + DRM_DEBUG_DRIVER("\n"); + + i2c_adap = i2c_get_adapter(1); + if (!i2c_adap) + goto fail; + + edid = drm_get_edid(connector, i2c_adap); + if (!edid) + goto fail; + + count = drm_add_edid_modes(connector, edid); + drm_mode_connector_update_edid_property(connector, edid); + + kfree(edid); + return count; + +fail: + DRM_ERROR("Can not read HDMI EDID\n"); + return 0; +} + +#define CLK_TOLERANCE_HZ 50 + +static int sti_hdmi_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + int target = mode->clock * 1000; + int target_min = target - CLK_TOLERANCE_HZ; + int target_max = target + CLK_TOLERANCE_HZ; + int result; + struct sti_hdmi_connector *hdmi_connector + = to_sti_hdmi_connector(connector); + struct sti_hdmi *hdmi = hdmi_connector->hdmi; + + + result = clk_round_rate(hdmi->clk_pix, target); + + DRM_DEBUG_DRIVER("target rate = %d => available rate = %d\n", + target, result); + + if ((result < target_min) || (result > target_max)) { + DRM_DEBUG_DRIVER("hdmi pixclk=%d not supported\n", target); + return MODE_BAD; + } + + return MODE_OK; +} + +struct drm_encoder *sti_hdmi_best_encoder(struct drm_connector *connector) +{ + struct sti_hdmi_connector *hdmi_connector + = to_sti_hdmi_connector(connector); + + /* Best encoder is the one associated during connector creation */ + return hdmi_connector->encoder; +} + +static struct drm_connector_helper_funcs sti_hdmi_connector_helper_funcs = { + .get_modes = sti_hdmi_connector_get_modes, + .mode_valid = sti_hdmi_connector_mode_valid, + .best_encoder = sti_hdmi_best_encoder, +}; + +/* get detection status of display device */ +static enum drm_connector_status +sti_hdmi_connector_detect(struct drm_connector *connector, bool force) +{ + struct sti_hdmi_connector *hdmi_connector + = to_sti_hdmi_connector(connector); + struct sti_hdmi *hdmi = hdmi_connector->hdmi; + + DRM_DEBUG_DRIVER("\n"); + + if (hdmi->hpd) { + DRM_DEBUG_DRIVER("hdmi cable connected\n"); + return connector_status_connected; + } + + DRM_DEBUG_DRIVER("hdmi cable disconnected\n"); + return connector_status_disconnected; +} + +static void sti_hdmi_connector_destroy(struct drm_connector *connector) +{ + struct sti_hdmi_connector *hdmi_connector + = to_sti_hdmi_connector(connector); + + drm_connector_unregister(connector); + drm_connector_cleanup(connector); + kfree(hdmi_connector); +} + +static struct drm_connector_funcs sti_hdmi_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .fill_modes = drm_helper_probe_single_connector_modes, + .detect = sti_hdmi_connector_detect, + .destroy = sti_hdmi_connector_destroy, +}; + +static struct drm_encoder *sti_hdmi_find_encoder(struct drm_device *dev) +{ + struct drm_encoder *encoder; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->encoder_type == DRM_MODE_ENCODER_TMDS) + return encoder; + } + + return NULL; +} + +static int sti_hdmi_bind(struct device *dev, struct device *master, void *data) +{ + struct sti_hdmi *hdmi = dev_get_drvdata(dev); + struct drm_device *drm_dev = data; + struct drm_encoder *encoder; + struct sti_hdmi_connector *connector; + struct drm_connector *drm_connector; + struct drm_bridge *bridge; + struct i2c_adapter *i2c_adap; + int err; + + i2c_adap = i2c_get_adapter(1); + if (!i2c_adap) + return -EPROBE_DEFER; + + /* Set the drm device handle */ + hdmi->drm_dev = drm_dev; + + encoder = sti_hdmi_find_encoder(drm_dev); + if (!encoder) + return -ENOMEM; + + connector = devm_kzalloc(dev, sizeof(*connector), GFP_KERNEL); + if (!connector) + return -ENOMEM; + + connector->hdmi = hdmi; + + bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL); + if (!bridge) + return -ENOMEM; + + bridge->driver_private = hdmi; + drm_bridge_init(drm_dev, bridge, &sti_hdmi_bridge_funcs); + + encoder->bridge = bridge; + connector->encoder = encoder; + + drm_connector = (struct drm_connector *)connector; + + drm_connector->polled = DRM_CONNECTOR_POLL_HPD; + + drm_connector_init(drm_dev, drm_connector, + &sti_hdmi_connector_funcs, DRM_MODE_CONNECTOR_HDMIA); + drm_connector_helper_add(drm_connector, + &sti_hdmi_connector_helper_funcs); + + err = drm_connector_register(drm_connector); + if (err) + goto err_connector; + + err = drm_mode_connector_attach_encoder(drm_connector, encoder); + if (err) { + DRM_ERROR("Failed to attach a connector to a encoder\n"); + goto err_sysfs; + } + + /* Enable default interrupts */ + hdmi_write(hdmi, HDMI_DEFAULT_INT, HDMI_INT_EN); + + return 0; + +err_sysfs: + drm_connector_unregister(drm_connector); +err_connector: + drm_bridge_cleanup(bridge); + drm_connector_cleanup(drm_connector); + return -EINVAL; +} + +static void sti_hdmi_unbind(struct device *dev, + struct device *master, void *data) +{ + /* do nothing */ +} + +static const struct component_ops sti_hdmi_ops = { + .bind = sti_hdmi_bind, + .unbind = sti_hdmi_unbind, +}; + +static struct of_device_id hdmi_of_match[] = { + { + .compatible = "st,stih416-hdmi", + .data = &tx3g0c55phy_ops, + }, { + .compatible = "st,stih407-hdmi", + .data = &tx3g4c28phy_ops, + }, { + /* end node */ + } +}; +MODULE_DEVICE_TABLE(of, hdmi_of_match); + +static int sti_hdmi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sti_hdmi *hdmi; + struct device_node *np = dev->of_node; + struct resource *res; + int ret; + + DRM_INFO("%s\n", __func__); + + hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL); + if (!hdmi) + return -ENOMEM; + + hdmi->dev = pdev->dev; + + /* Get resources */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hdmi-reg"); + if (!res) { + DRM_ERROR("Invalid hdmi resource\n"); + return -ENOMEM; + } + hdmi->regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); + if (IS_ERR(hdmi->regs)) + return PTR_ERR(hdmi->regs); + + if (of_device_is_compatible(np, "st,stih416-hdmi")) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "syscfg"); + if (!res) { + DRM_ERROR("Invalid syscfg resource\n"); + return -ENOMEM; + } + hdmi->syscfg = devm_ioremap_nocache(dev, res->start, + resource_size(res)); + if (IS_ERR(hdmi->syscfg)) + return PTR_ERR(hdmi->syscfg); + + } + + hdmi->phy_ops = (struct hdmi_phy_ops *) + of_match_node(hdmi_of_match, np)->data; + + /* Get clock resources */ + hdmi->clk_pix = devm_clk_get(dev, "pix"); + if (IS_ERR(hdmi->clk_pix)) { + DRM_ERROR("Cannot get hdmi_pix clock\n"); + return PTR_ERR(hdmi->clk_pix); + } + + hdmi->clk_tmds = devm_clk_get(dev, "tmds"); + if (IS_ERR(hdmi->clk_tmds)) { + DRM_ERROR("Cannot get hdmi_tmds clock\n"); + return PTR_ERR(hdmi->clk_tmds); + } + + hdmi->clk_phy = devm_clk_get(dev, "phy"); + if (IS_ERR(hdmi->clk_phy)) { + DRM_ERROR("Cannot get hdmi_phy clock\n"); + return PTR_ERR(hdmi->clk_phy); + } + + hdmi->clk_audio = devm_clk_get(dev, "audio"); + if (IS_ERR(hdmi->clk_audio)) { + DRM_ERROR("Cannot get hdmi_audio clock\n"); + return PTR_ERR(hdmi->clk_audio); + } + + hdmi->hpd_gpio = of_get_named_gpio(np, "hdmi,hpd-gpio", 0); + if (hdmi->hpd_gpio < 0) { + DRM_ERROR("Failed to get hdmi hpd-gpio\n"); + return -EIO; + } + + hdmi->hpd = gpio_get_value(hdmi->hpd_gpio); + + init_waitqueue_head(&hdmi->wait_event); + + hdmi->irq = platform_get_irq_byname(pdev, "irq"); + + ret = devm_request_threaded_irq(dev, hdmi->irq, hdmi_irq, + hdmi_irq_thread, IRQF_ONESHOT, dev_name(dev), hdmi); + if (ret) { + DRM_ERROR("Failed to register HDMI interrupt\n"); + return ret; + } + + hdmi->reset = devm_reset_control_get(dev, "hdmi"); + /* Take hdmi out of reset */ + if (!IS_ERR(hdmi->reset)) + reset_control_deassert(hdmi->reset); + + platform_set_drvdata(pdev, hdmi); + + return component_add(&pdev->dev, &sti_hdmi_ops); +} + +static int sti_hdmi_remove(struct platform_device *pdev) +{ + component_del(&pdev->dev, &sti_hdmi_ops); + return 0; +} + +struct platform_driver sti_hdmi_driver = { + .driver = { + .name = "sti-hdmi", + .owner = THIS_MODULE, + .of_match_table = hdmi_of_match, + }, + .probe = sti_hdmi_probe, + .remove = sti_hdmi_remove, +}; + +module_platform_driver(sti_hdmi_driver); + +MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h new file mode 100644 index 000000000000..61bec6557ceb --- /dev/null +++ b/drivers/gpu/drm/sti/sti_hdmi.h @@ -0,0 +1,88 @@ +/* + * Copyright (C) STMicroelectronics SA 2014 + * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _STI_HDMI_H_ +#define _STI_HDMI_H_ + +#include <linux/platform_device.h> + +#include <drm/drmP.h> + +#define HDMI_STA 0x0010 +#define HDMI_STA_DLL_LCK BIT(5) + +struct sti_hdmi; + +struct hdmi_phy_ops { + bool (*start)(struct sti_hdmi *hdmi); + void (*stop)(struct sti_hdmi *hdmi); +}; + +/** + * STI hdmi structure + * + * @dev: driver device + * @drm_dev: pointer to drm device + * @mode: current display mode selected + * @regs: hdmi register + * @syscfg: syscfg register for pll rejection configuration + * @clk_pix: hdmi pixel clock + * @clk_tmds: hdmi tmds clock + * @clk_phy: hdmi phy clock + * @clk_audio: hdmi audio clock + * @irq: hdmi interrupt number + * @irq_status: interrupt status register + * @phy_ops: phy start/stop operations + * @enabled: true if hdmi is enabled else false + * @hpd_gpio: hdmi hot plug detect gpio number + * @hpd: hot plug detect status + * @wait_event: wait event + * @event_received: wait event status + * @reset: reset control of the hdmi phy + */ +struct sti_hdmi { + struct device dev; + struct drm_device *drm_dev; + struct drm_display_mode mode; + void __iomem *regs; + void __iomem *syscfg; + struct clk *clk_pix; + struct clk *clk_tmds; + struct clk *clk_phy; + struct clk *clk_audio; + int irq; + u32 irq_status; + struct hdmi_phy_ops *phy_ops; + bool enabled; + int hpd_gpio; + bool hpd; + wait_queue_head_t wait_event; + bool event_received; + struct reset_control *reset; +}; + +u32 hdmi_read(struct sti_hdmi *hdmi, int offset); +void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset); + +/** + * hdmi phy config structure + * + * A pointer to an array of these structures is passed to a TMDS (HDMI) output + * via the control interface to provide board and SoC specific + * configurations of the HDMI PHY. Each entry in the array specifies a hardware + * specific configuration for a given TMDS clock frequency range. + * + * @min_tmds_freq: Lower bound of TMDS clock frequency this entry applies to + * @max_tmds_freq: Upper bound of TMDS clock frequency this entry applies to + * @config: SoC specific register configuration + */ +struct hdmi_phy_config { + u32 min_tmds_freq; + u32 max_tmds_freq; + u32 config[4]; +}; + +#endif diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c new file mode 100644 index 000000000000..49ae8e44b285 --- /dev/null +++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c @@ -0,0 +1,336 @@ +/* + * Copyright (C) STMicroelectronics SA 2014 + * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + */ + +#include "sti_hdmi_tx3g0c55phy.h" + +#define HDMI_SRZ_PLL_CFG 0x0504 +#define HDMI_SRZ_TAP_1 0x0508 +#define HDMI_SRZ_TAP_2 0x050C +#define HDMI_SRZ_TAP_3 0x0510 +#define HDMI_SRZ_CTRL 0x0514 + +#define HDMI_SRZ_PLL_CFG_POWER_DOWN BIT(0) +#define HDMI_SRZ_PLL_CFG_VCOR_SHIFT 1 +#define HDMI_SRZ_PLL_CFG_VCOR_425MHZ 0 +#define HDMI_SRZ_PLL_CFG_VCOR_850MHZ 1 +#define HDMI_SRZ_PLL_CFG_VCOR_1700MHZ 2 +#define HDMI_SRZ_PLL_CFG_VCOR_3000MHZ 3 +#define HDMI_SRZ_PLL_CFG_VCOR_MASK 3 +#define HDMI_SRZ_PLL_CFG_VCOR(x) (x << HDMI_SRZ_PLL_CFG_VCOR_SHIFT) +#define HDMI_SRZ_PLL_CFG_NDIV_SHIFT 8 +#define HDMI_SRZ_PLL_CFG_NDIV_MASK (0x1F << HDMI_SRZ_PLL_CFG_NDIV_SHIFT) +#define HDMI_SRZ_PLL_CFG_MODE_SHIFT 16 +#define HDMI_SRZ_PLL_CFG_MODE_13_5_MHZ 0x1 +#define HDMI_SRZ_PLL_CFG_MODE_25_2_MHZ 0x4 +#define HDMI_SRZ_PLL_CFG_MODE_27_MHZ 0x5 +#define HDMI_SRZ_PLL_CFG_MODE_33_75_MHZ 0x6 +#define HDMI_SRZ_PLL_CFG_MODE_40_5_MHZ 0x7 +#define HDMI_SRZ_PLL_CFG_MODE_54_MHZ 0x8 +#define HDMI_SRZ_PLL_CFG_MODE_67_5_MHZ 0x9 +#define HDMI_SRZ_PLL_CFG_MODE_74_25_MHZ 0xA +#define HDMI_SRZ_PLL_CFG_MODE_81_MHZ 0xB +#define HDMI_SRZ_PLL_CFG_MODE_82_5_MHZ 0xC +#define HDMI_SRZ_PLL_CFG_MODE_108_MHZ 0xD +#define HDMI_SRZ_PLL_CFG_MODE_148_5_MHZ 0xE +#define HDMI_SRZ_PLL_CFG_MODE_165_MHZ 0xF +#define HDMI_SRZ_PLL_CFG_MODE_MASK 0xF +#define HDMI_SRZ_PLL_CFG_MODE(x) (x << HDMI_SRZ_PLL_CFG_MODE_SHIFT) + +#define HDMI_SRZ_CTRL_POWER_DOWN (1 << 0) +#define HDMI_SRZ_CTRL_EXTERNAL_DATA_EN (1 << 1) + +/* sysconf registers */ +#define HDMI_REJECTION_PLL_CONFIGURATION 0x0858 /* SYSTEM_CONFIG2534 */ +#define HDMI_REJECTION_PLL_STATUS 0x0948 /* SYSTEM_CONFIG2594 */ + +#define REJECTION_PLL_HDMI_ENABLE_SHIFT 0 +#define REJECTION_PLL_HDMI_ENABLE_MASK (0x1 << REJECTION_PLL_HDMI_ENABLE_SHIFT) +#define REJECTION_PLL_HDMI_PDIV_SHIFT 24 +#define REJECTION_PLL_HDMI_PDIV_MASK (0x7 << REJECTION_PLL_HDMI_PDIV_SHIFT) +#define REJECTION_PLL_HDMI_NDIV_SHIFT 16 +#define REJECTION_PLL_HDMI_NDIV_MASK (0xFF << REJECTION_PLL_HDMI_NDIV_SHIFT) +#define REJECTION_PLL_HDMI_MDIV_SHIFT 8 +#define REJECTION_PLL_HDMI_MDIV_MASK (0xFF << REJECTION_PLL_HDMI_MDIV_SHIFT) + +#define REJECTION_PLL_HDMI_REJ_PLL_LOCK BIT(0) + +#define HDMI_TIMEOUT_PLL_LOCK 50 /*milliseconds */ + +/** + * pll mode structure + * + * A pointer to an array of these structures is passed to a TMDS (HDMI) output + * via the control interface to provide board and SoC specific + * configurations of the HDMI PHY. Each entry in the array specifies a hardware + * specific configuration for a given TMDS clock frequency range. The array + * should be terminated with an entry that has all fields set to zero. + * + * @min: Lower bound of TMDS clock frequency this entry applies to + * @max: Upper bound of TMDS clock frequency this entry applies to + * @mode: SoC specific register configuration + */ +struct pllmode { + u32 min; + u32 max; + u32 mode; +}; + +#define NB_PLL_MODE 7 +static struct pllmode pllmodes[NB_PLL_MODE] = { + {13500000, 13513500, HDMI_SRZ_PLL_CFG_MODE_13_5_MHZ}, + {25174800, 25200000, HDMI_SRZ_PLL_CFG_MODE_25_2_MHZ}, + {27000000, 27027000, HDMI_SRZ_PLL_CFG_MODE_27_MHZ}, + {54000000, 54054000, HDMI_SRZ_PLL_CFG_MODE_54_MHZ}, + {72000000, 74250000, HDMI_SRZ_PLL_CFG_MODE_74_25_MHZ}, + {108000000, 108108000, HDMI_SRZ_PLL_CFG_MODE_108_MHZ}, + {148351648, 297000000, HDMI_SRZ_PLL_CFG_MODE_148_5_MHZ} +}; + +#define NB_HDMI_PHY_CONFIG 5 +static struct hdmi_phy_config hdmiphy_config[NB_HDMI_PHY_CONFIG] = { + {0, 40000000, {0x00101010, 0x00101010, 0x00101010, 0x02} }, + {40000000, 140000000, {0x00111111, 0x00111111, 0x00111111, 0x02} }, + {140000000, 160000000, {0x00131313, 0x00101010, 0x00101010, 0x02} }, + {160000000, 250000000, {0x00131313, 0x00111111, 0x00111111, 0x03FE} }, + {250000000, 300000000, {0x00151515, 0x00101010, 0x00101010, 0x03FE} }, +}; + +#define PLL_CHANGE_DELAY 1 /* ms */ + +/** + * Disable the pll rejection + * + * @hdmi: pointer on the hdmi internal structure + * + * return true if the pll has been disabled + */ +static bool disable_pll_rejection(struct sti_hdmi *hdmi) +{ + u32 val; + + DRM_DEBUG_DRIVER("\n"); + + val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION); + val &= ~REJECTION_PLL_HDMI_ENABLE_MASK; + writel(val, hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION); + + msleep(PLL_CHANGE_DELAY); + val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_STATUS); + + return !(val & REJECTION_PLL_HDMI_REJ_PLL_LOCK); +} + +/** + * Enable the old BCH/rejection PLL is now reused to provide the CLKPXPLL + * clock input to the new PHY PLL that generates the serializer clock + * (TMDS*10) and the TMDS clock which is now fed back into the HDMI + * formatter instead of the TMDS clock line from ClockGenB. + * + * @hdmi: pointer on the hdmi internal structure + * + * return true if pll has been correctly set + */ +static bool enable_pll_rejection(struct sti_hdmi *hdmi) +{ + unsigned int inputclock; + u32 mdiv, ndiv, pdiv, val; + + DRM_DEBUG_DRIVER("\n"); + + if (!disable_pll_rejection(hdmi)) + return false; + + inputclock = hdmi->mode.clock * 1000; + + DRM_DEBUG_DRIVER("hdmi rejection pll input clock = %dHz\n", inputclock); + + + /* Power up the HDMI rejection PLL + * Note: On this SoC (stiH416) we are forced to have the input clock + * be equal to the HDMI pixel clock. + * + * The values here have been suggested by validation however they are + * still provisional and subject to change. + * + * PLLout = (Fin*Mdiv) / ((2 * Ndiv) / 2^Pdiv) + */ + if (inputclock < 50000000) { + /* + * For slower clocks we need to multiply more to keep the + * internal VCO frequency within the physical specification + * of the PLL. + */ + pdiv = 4; + ndiv = 240; + mdiv = 30; + } else { + pdiv = 2; + ndiv = 60; + mdiv = 30; + } + + val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION); + + val &= ~(REJECTION_PLL_HDMI_PDIV_MASK | + REJECTION_PLL_HDMI_NDIV_MASK | + REJECTION_PLL_HDMI_MDIV_MASK | + REJECTION_PLL_HDMI_ENABLE_MASK); + + val |= (pdiv << REJECTION_PLL_HDMI_PDIV_SHIFT) | + (ndiv << REJECTION_PLL_HDMI_NDIV_SHIFT) | + (mdiv << REJECTION_PLL_HDMI_MDIV_SHIFT) | + (0x1 << REJECTION_PLL_HDMI_ENABLE_SHIFT); + + writel(val, hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION); + + msleep(PLL_CHANGE_DELAY); + val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_STATUS); + + return (val & REJECTION_PLL_HDMI_REJ_PLL_LOCK); +} + +/** + * Start hdmi phy macro cell tx3g0c55 + * + * @hdmi: pointer on the hdmi internal structure + * + * Return false if an error occur + */ +static bool sti_hdmi_tx3g0c55phy_start(struct sti_hdmi *hdmi) +{ + u32 ckpxpll = hdmi->mode.clock * 1000; + u32 val, tmdsck, freqvco, pllctrl = 0; + unsigned int i; + + if (!enable_pll_rejection(hdmi)) + return false; + + DRM_DEBUG_DRIVER("ckpxpll = %dHz\n", ckpxpll); + + /* Assuming no pixel repetition and 24bits color */ + tmdsck = ckpxpll; + pllctrl = 2 << HDMI_SRZ_PLL_CFG_NDIV_SHIFT; + + /* + * Setup the PLL mode parameter based on the ckpxpll. If we haven't got + * a clock frequency supported by one of the specific PLL modes then we + * will end up using the generic mode (0) which only supports a 10x + * multiplier, hence only 24bit color. + */ + for (i = 0; i < NB_PLL_MODE; i++) { + if (ckpxpll >= pllmodes[i].min && ckpxpll <= pllmodes[i].max) + pllctrl |= HDMI_SRZ_PLL_CFG_MODE(pllmodes[i].mode); + } + + freqvco = tmdsck * 10; + if (freqvco <= 425000000UL) + pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_425MHZ); + else if (freqvco <= 850000000UL) + pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_850MHZ); + else if (freqvco <= 1700000000UL) + pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_1700MHZ); + else if (freqvco <= 2970000000UL) + pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_3000MHZ); + else { + DRM_ERROR("PHY serializer clock out of range\n"); + goto err; + } + + /* + * Configure and power up the PHY PLL + */ + hdmi->event_received = false; + DRM_DEBUG_DRIVER("pllctrl = 0x%x\n", pllctrl); + hdmi_write(hdmi, pllctrl, HDMI_SRZ_PLL_CFG); + + /* wait PLL interrupt */ + wait_event_interruptible_timeout(hdmi->wait_event, + hdmi->event_received == true, + msecs_to_jiffies + (HDMI_TIMEOUT_PLL_LOCK)); + + if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK) == 0) { + DRM_ERROR("hdmi phy pll not locked\n"); + goto err; + } + + DRM_DEBUG_DRIVER("got PHY PLL Lock\n"); + + /* + * To configure the source termination and pre-emphasis appropriately + * for different high speed TMDS clock frequencies a phy configuration + * table must be provided, tailored to the SoC and board combination. + */ + for (i = 0; i < NB_HDMI_PHY_CONFIG; i++) { + if ((hdmiphy_config[i].min_tmds_freq <= tmdsck) && + (hdmiphy_config[i].max_tmds_freq >= tmdsck)) { + val = hdmiphy_config[i].config[0]; + hdmi_write(hdmi, val, HDMI_SRZ_TAP_1); + val = hdmiphy_config[i].config[1]; + hdmi_write(hdmi, val, HDMI_SRZ_TAP_2); + val = hdmiphy_config[i].config[2]; + hdmi_write(hdmi, val, HDMI_SRZ_TAP_3); + val = hdmiphy_config[i].config[3]; + val |= HDMI_SRZ_CTRL_EXTERNAL_DATA_EN; + val &= ~HDMI_SRZ_CTRL_POWER_DOWN; + hdmi_write(hdmi, val, HDMI_SRZ_CTRL); + + DRM_DEBUG_DRIVER("serializer cfg 0x%x 0x%x 0x%x 0x%x\n", + hdmiphy_config[i].config[0], + hdmiphy_config[i].config[1], + hdmiphy_config[i].config[2], + hdmiphy_config[i].config[3]); + return true; + } + } + + /* + * Default, power up the serializer with no pre-emphasis or source + * termination. + */ + hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_1); + hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_2); + hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_3); + hdmi_write(hdmi, HDMI_SRZ_CTRL_EXTERNAL_DATA_EN, HDMI_SRZ_CTRL); + + return true; + +err: + disable_pll_rejection(hdmi); + + return false; +} + +/** + * Stop hdmi phy macro cell tx3g0c55 + * + * @hdmi: pointer on the hdmi internal structure + */ +static void sti_hdmi_tx3g0c55phy_stop(struct sti_hdmi *hdmi) +{ + DRM_DEBUG_DRIVER("\n"); + + hdmi->event_received = false; + + hdmi_write(hdmi, HDMI_SRZ_CTRL_POWER_DOWN, HDMI_SRZ_CTRL); + hdmi_write(hdmi, HDMI_SRZ_PLL_CFG_POWER_DOWN, HDMI_SRZ_PLL_CFG); + + /* wait PLL interrupt */ + wait_event_interruptible_timeout(hdmi->wait_event, + hdmi->event_received == true, + msecs_to_jiffies + (HDMI_TIMEOUT_PLL_LOCK)); + + if (hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK) + DRM_ERROR("hdmi phy pll not well disabled\n"); + + disable_pll_rejection(hdmi); +} + +struct hdmi_phy_ops tx3g0c55phy_ops = { + .start = sti_hdmi_tx3g0c55phy_start, + .stop = sti_hdmi_tx3g0c55phy_stop, +}; diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h new file mode 100644 index 000000000000..068237b3a303 --- /dev/null +++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) STMicroelectronics SA 2014 + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _STI_HDMI_TX3G0C55PHY_H_ +#define _STI_HDMI_TX3G0C55PHY_H_ + +#include "sti_hdmi.h" + +extern struct hdmi_phy_ops tx3g0c55phy_ops; + +#endif diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c new file mode 100644 index 000000000000..8e0ceb0ced33 --- /dev/null +++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c @@ -0,0 +1,211 @@ +/* + * Copyright (C) STMicroelectronics SA 2014 + * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + */ + +#include "sti_hdmi_tx3g4c28phy.h" + +#define HDMI_SRZ_CFG 0x504 +#define HDMI_SRZ_PLL_CFG 0x510 +#define HDMI_SRZ_ICNTL 0x518 +#define HDMI_SRZ_CALCODE_EXT 0x520 + +#define HDMI_SRZ_CFG_EN BIT(0) +#define HDMI_SRZ_CFG_DISABLE_BYPASS_SINK_CURRENT BIT(1) +#define HDMI_SRZ_CFG_EXTERNAL_DATA BIT(16) +#define HDMI_SRZ_CFG_RBIAS_EXT BIT(17) +#define HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION BIT(18) +#define HDMI_SRZ_CFG_EN_BIASRES_DETECTION BIT(19) +#define HDMI_SRZ_CFG_EN_SRC_TERMINATION BIT(24) + +#define HDMI_SRZ_CFG_INTERNAL_MASK (HDMI_SRZ_CFG_EN | \ + HDMI_SRZ_CFG_DISABLE_BYPASS_SINK_CURRENT | \ + HDMI_SRZ_CFG_EXTERNAL_DATA | \ + HDMI_SRZ_CFG_RBIAS_EXT | \ + HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION | \ + HDMI_SRZ_CFG_EN_BIASRES_DETECTION | \ + HDMI_SRZ_CFG_EN_SRC_TERMINATION) + +#define PLL_CFG_EN BIT(0) +#define PLL_CFG_NDIV_SHIFT (8) +#define PLL_CFG_IDF_SHIFT (16) +#define PLL_CFG_ODF_SHIFT (24) + +#define ODF_DIV_1 (0) +#define ODF_DIV_2 (1) +#define ODF_DIV_4 (2) +#define ODF_DIV_8 (3) + +#define HDMI_TIMEOUT_PLL_LOCK 50 /*milliseconds */ + +struct plldividers_s { + uint32_t min; + uint32_t max; + uint32_t idf; + uint32_t odf; +}; + +/* + * Functional specification recommended values + */ +#define NB_PLL_MODE 5 +static struct plldividers_s plldividers[NB_PLL_MODE] = { + {0, 20000000, 1, ODF_DIV_8}, + {20000000, 42500000, 2, ODF_DIV_8}, + {42500000, 85000000, 4, ODF_DIV_4}, + {85000000, 170000000, 8, ODF_DIV_2}, + {170000000, 340000000, 16, ODF_DIV_1} +}; + +#define NB_HDMI_PHY_CONFIG 2 +static struct hdmi_phy_config hdmiphy_config[NB_HDMI_PHY_CONFIG] = { + {0, 250000000, {0x0, 0x0, 0x0, 0x0} }, + {250000000, 300000000, {0x1110, 0x0, 0x0, 0x0} }, +}; + +/** + * Start hdmi phy macro cell tx3g4c28 + * + * @hdmi: pointer on the hdmi internal structure + * + * Return false if an error occur + */ +static bool sti_hdmi_tx3g4c28phy_start(struct sti_hdmi *hdmi) +{ + u32 ckpxpll = hdmi->mode.clock * 1000; + u32 val, tmdsck, idf, odf, pllctrl = 0; + bool foundplldivides = false; + int i; + + DRM_DEBUG_DRIVER("ckpxpll = %dHz\n", ckpxpll); + + for (i = 0; i < NB_PLL_MODE; i++) { + if (ckpxpll >= plldividers[i].min && + ckpxpll < plldividers[i].max) { + idf = plldividers[i].idf; + odf = plldividers[i].odf; + foundplldivides = true; + break; + } + } + + if (!foundplldivides) { + DRM_ERROR("input TMDS clock speed (%d) not supported\n", + ckpxpll); + goto err; + } + + /* Assuming no pixel repetition and 24bits color */ + tmdsck = ckpxpll; + pllctrl |= 40 << PLL_CFG_NDIV_SHIFT; + + if (tmdsck > 340000000) { + DRM_ERROR("output TMDS clock (%d) out of range\n", tmdsck); + goto err; + } + + pllctrl |= idf << PLL_CFG_IDF_SHIFT; + pllctrl |= odf << PLL_CFG_ODF_SHIFT; + + /* + * Configure and power up the PHY PLL + */ + hdmi->event_received = false; + DRM_DEBUG_DRIVER("pllctrl = 0x%x\n", pllctrl); + hdmi_write(hdmi, (pllctrl | PLL_CFG_EN), HDMI_SRZ_PLL_CFG); + + /* wait PLL interrupt */ + wait_event_interruptible_timeout(hdmi->wait_event, + hdmi->event_received == true, + msecs_to_jiffies + (HDMI_TIMEOUT_PLL_LOCK)); + + if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK) == 0) { + DRM_ERROR("hdmi phy pll not locked\n"); + goto err; + } + + DRM_DEBUG_DRIVER("got PHY PLL Lock\n"); + + val = (HDMI_SRZ_CFG_EN | + HDMI_SRZ_CFG_EXTERNAL_DATA | + HDMI_SRZ_CFG_EN_BIASRES_DETECTION | + HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION); + + if (tmdsck > 165000000) + val |= HDMI_SRZ_CFG_EN_SRC_TERMINATION; + + /* + * To configure the source termination and pre-emphasis appropriately + * for different high speed TMDS clock frequencies a phy configuration + * table must be provided, tailored to the SoC and board combination. + */ + for (i = 0; i < NB_HDMI_PHY_CONFIG; i++) { + if ((hdmiphy_config[i].min_tmds_freq <= tmdsck) && + (hdmiphy_config[i].max_tmds_freq >= tmdsck)) { + val |= (hdmiphy_config[i].config[0] + & ~HDMI_SRZ_CFG_INTERNAL_MASK); + hdmi_write(hdmi, val, HDMI_SRZ_CFG); + + val = hdmiphy_config[i].config[1]; + hdmi_write(hdmi, val, HDMI_SRZ_ICNTL); + + val = hdmiphy_config[i].config[2]; + hdmi_write(hdmi, val, HDMI_SRZ_CALCODE_EXT); + + DRM_DEBUG_DRIVER("serializer cfg 0x%x 0x%x 0x%x\n", + hdmiphy_config[i].config[0], + hdmiphy_config[i].config[1], + hdmiphy_config[i].config[2]); + return true; + } + } + + /* + * Default, power up the serializer with no pre-emphasis or + * output swing correction + */ + hdmi_write(hdmi, val, HDMI_SRZ_CFG); + hdmi_write(hdmi, 0x0, HDMI_SRZ_ICNTL); + hdmi_write(hdmi, 0x0, HDMI_SRZ_CALCODE_EXT); + + return true; + +err: + return false; +} + +/** + * Stop hdmi phy macro cell tx3g4c28 + * + * @hdmi: pointer on the hdmi internal structure + */ +static void sti_hdmi_tx3g4c28phy_stop(struct sti_hdmi *hdmi) +{ + int val = 0; + + DRM_DEBUG_DRIVER("\n"); + + hdmi->event_received = false; + + val = HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION; + val |= HDMI_SRZ_CFG_EN_BIASRES_DETECTION; + + hdmi_write(hdmi, val, HDMI_SRZ_CFG); + hdmi_write(hdmi, 0, HDMI_SRZ_PLL_CFG); + + /* wait PLL interrupt */ + wait_event_interruptible_timeout(hdmi->wait_event, + hdmi->event_received == true, + msecs_to_jiffies + (HDMI_TIMEOUT_PLL_LOCK)); + + if (hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK) + DRM_ERROR("hdmi phy pll not well disabled\n"); +} + +struct hdmi_phy_ops tx3g4c28phy_ops = { + .start = sti_hdmi_tx3g4c28phy_start, + .stop = sti_hdmi_tx3g4c28phy_stop, +}; diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h new file mode 100644 index 000000000000..f99a7ff281ef --- /dev/null +++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) STMicroelectronics SA 2014 + * Author: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _STI_HDMI_TX3G4C28PHY_H_ +#define _STI_HDMI_TX3G4C28PHY_H_ + +#include "sti_hdmi.h" + +extern struct hdmi_phy_ops tx3g4c28phy_ops; + +#endif |